1 files changed, 75 insertions, 0 deletions
diff --git a/conf/machine/gumstix-custom-connex.conf b/conf/machine/gumstix-custom-connex.conf
new file mode 100644
index 0000000000..1b854582f8
--- /dev/null
+++ b/conf/machine/gumstix-custom-connex.conf
@@ -0,0 +1,75 @@
+#
+# Use this file as a starting point for your custom gumstix configuration
+# Edit it to reflect your hardware setup and then save it a parallel location in user.collection
+
+MACHINE_FEATURES += "connex"
+require conf/machine/include/gumstix.inc
+require conf/machine/include/tune-xscale.inc
+
+#
+# Your flash size = Total flash (in MB) - 1 (for linux kernel partition)
+#ROOT_FLASH_SIZE = "3"
+ROOT_FLASH_SIZE = "15"
+
+#
+# Enable use of virtual terminal for LCD on tty1 if USE_VT = "1"
+USE_VT = "0"
+#USE_VT = "1"
+#SYSVINIT_ENABLED_GETTYS = "1"
+
+#
+# Uncomment features that your board set supports
+
+#MACHINE_FEATURES += "usbhost"
+MACHINE_FEATURES += "usbgadget"
+
+MACHINE_FEATURES  += "i2c"
+#MACHINE_FEATURES  += "spi"
+
+MACHINE_FEATURES  += "serial"
+MACHINE_FEATURES  += "bluetooth"
+MACHINE_FEATURES  += "sound"
+
+# if you enable robostix you will need to disable both "lcd" and "touchscreen" features
+#MACHINE_FEATURES  += "robostix"
+
+#MACHINE_FEATURES  += "lcd"
+#MACHINE_FEATURES  += "touchscreen"
+#MACHINE_FEATURES  += "keyboard"
+
+MACHINE_FEATURES  += "pcmcia"
+#MACHINE_FEATURES  += "mmc"
+
+MACHINE_FEATURES  += "wifi"
+MACHINE_FEATURES  += "ethernet"
+
+MACHINE_FEATURES  += "fat"
+#MACHINE_FEATURES  += "ext2"
+
+#
+# note:  selection of MACHINE_FEATURES above will automatically include necessary kernel modules
+# for those features via task-base-gumstix.  Include below any extra kernel modules that you want installed
+
+#MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "kernel-module-xxxxxxx"
+
+#
+# Uncomment or add kernel modules that should be autoloaded
+
+module_autoload_proc_gpio      = 'proc_gpio'
+
+module_autoload_pcmcia         = ${@base_contains('MACHINE_FEATURES', 'pcmcia',     'pcmcia', '',d)}
+module_autoload_pxa2xx_cs      = ${@base_contains('MACHINE_FEATURES', 'pcmcia',     'pxa2xx_cs', '',d)}
+
+module_autoload_pxamci         = ${@base_contains('MACHINE_FEATURES', 'mmc',        'pxamci', '',d)}
+module_autoload_mmc_block      = ${@base_contains('MACHINE_FEATURES', 'mmc',        'mmc_block', '',d)}
+
+module_autoload_ethernet       = ${@base_contains('MACHINE_FEATURES', 'ethernet',   'ethernet', '',d)}
+
+module_autoload_gumstix_gadget = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'gumstix_gadget', '',d)}
+#module_autoload_g_file_storage = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'g_file_storage', '',d)}
+module_autoload_g_ether        = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'g_ether', '',d)}
+#module_autoload_g_serial       = ${@base_contains('MACHINE_FEATURES', 'usbgadget',  'g_serial', '',d)}
+
+module_autoload_ucb1400-ts     = ${@base_contains('MACHINE_FEATURES', 'touchscreen','ucb1400-ts', '',d)}
+module_autoload_evdev          = ${@base_contains('MACHINE_FEATURES', 'touchscreen','evdev', '',d)}
+