8 files changed, 36 insertions, 158 deletions
diff --git a/conf/distro/debianslug.conf b/conf/distro/debianslug.conf
index 925096813d..59123fd6b5 100644
--- a/conf/distro/debianslug.conf
+++ b/conf/distro/debianslug.conf
@@ -2,6 +2,10 @@
 #@NAME: DebianSlug
 #@DESCRIPTION: DebianSlug Linux Distribution for the NSLU2
 
-SLUGOS_DISTRO = "debianslug"
+DISTRO_NAME = "DebianSlug"
+IMAGE_BASENAME = "debianslug"
+TARGET_ARCH = "arm"
+ARM_INSTRUCTION_SET = "arm"
+TARGET_OS = "linux"
 
-require conf/distro/slugosle.conf
+require conf/distro/slugos.conf
diff --git a/conf/distro/include/angstrom.inc b/conf/distro/include/angstrom.inc
index aef4abf55d..9efe1d5d90 100644
--- a/conf/distro/include/angstrom.inc
+++ b/conf/distro/include/angstrom.inc
@@ -46,4 +46,4 @@ DISTRO_CHECK := "${@bb.data.getVar("DISTRO_VERSION",d,1) or bb.fatal('Remove thi
 
 # We want images supporting the following features (for task-base)
 DISTRO_FEATURES = "nfs smbfs wifi ppp alsa bluetooth ext2 irda pcmcia usbgadget usbhost pci"
-DISTRO_FEATURES_nslu2le = "nfs smbfs alsa bluetooth ext2 usbhost pci"
+DISTRO_FEATURES_nslu2 = "nfs smbfs alsa bluetooth ext2 usbhost pci"
diff --git a/conf/distro/include/slugos.inc b/conf/distro/include/slugos.inc
index 52b9e5bef5..a26a069fa0 100644
--- a/conf/distro/include/slugos.inc
+++ b/conf/distro/include/slugos.inc
@@ -23,9 +23,7 @@ DISTRO_VERSION ?= "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
 # DISTRO_FEED ?= "${SLUGOS_VERSION}-${DISTRO_TYPE}"
 DISTRO_FEED ?= "unstable"
 
-SLUGOS_DISTRO ?= "slugos"
-
-IMAGE_BASENAME = "${SLUGOS_DISTRO}"
+IMAGE_BASENAME = "${@['slugos${SITEINFO_ENDIANESS}', 'ucslugc'][bb.data.getVar('TARGET_OS', d, 1) == 'linux-uclibc']}"
 
 # The following need not be set, the defaults should be adequate
 #USE_NLS = "no" or "yes"
@@ -41,9 +39,7 @@ TARGET_FPU = "soft"
 # glib-2.0 builds require USE_NLS to be overridden
 USE_NLS_glib-2.0 = "yes"
 
-INHERIT += "package_ipk debian"
-
-DISTRO_BASE = ":slugos"
+INHERIT += "package_ipk debian multimachine"
 
 # FULL_OPTIMIZATION
 #    Optimization settings.  Os works fine and is significantly better than O2.
@@ -64,8 +60,8 @@ FULL_OPTIMIZATION = "-Os -fomit-frame-pointer -frename-registers \
 #  (such as a local feed) can be defined in local.conf
 #----------------------------------------------------------------------------------
 #
-FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS_DISTRO}/cross/${DISTRO_FEED}"
-FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS_DISTRO}/native/${DISTRO_FEED}"
+FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/${IMAGE_BASENAME}/cross/${DISTRO_FEED}"
+FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/${IMAGE_BASENAME}/native/${DISTRO_FEED}"
 
 #----------------------------------------------------------------------------------
 # FIRMWARE CONFIGURATION
diff --git a/conf/distro/openslug-native.conf b/conf/distro/openslug-native.conf
index 2bcf6dd980..ac77532697 100644
--- a/conf/distro/openslug-native.conf
+++ b/conf/distro/openslug-native.conf
@@ -1,9 +1,7 @@
-SLUGOS_DISTRO = "openslug"
-
 # Our build host is armeb, not armv5eb that the kernel reports
 BUILD_ARCH = "armeb"
 
-require conf/distro/slugosbe.conf
+require conf/distro/openslug.conf
 
 # Corresponding packages should be in openslug-native.bb,
 # currently missing: ipkg-utils libtool quilt pkgconfig
diff --git a/conf/distro/openslug.conf b/conf/distro/openslug.conf
index 943ce1a985..f03c4f653e 100644
--- a/conf/distro/openslug.conf
+++ b/conf/distro/openslug.conf
@@ -2,6 +2,10 @@
 #@NAME: OpenSlug
 #@DESCRIPTION: OpenSlug Linux Distribution for the NSLU2
 
-SLUGOS_DISTRO = "openslug"
+DISTRO_NAME = "OpenSlug"
+IMAGE_BASENAME = "openslug"
+TARGET_ARCH = "armeb"
+ARM_INSTRUCTION_SET = "arm"
+TARGET_OS = "linux"
 
-require conf/distro/slugosbe.conf
+require conf/distro/slugos.conf
diff --git a/conf/distro/slugosbe.conf b/conf/distro/slugos.conf
index 4f664c58c3..32b047aeae 100644
--- a/conf/distro/slugosbe.conf
+++ b/conf/distro/slugos.conf
@@ -1,17 +1,15 @@
 #@TYPE: Distribution
-#@NAME: SlugOS/BE
-#@DESCRIPTION: SlugOS/BE Linux Distribution for the NSLU2
+#@NAME: SlugOS
+#@DESCRIPTION: SlugOS Linux Distribution for the NSLU2
 
 #----------------------------------------------------------------------------------
 # STANDARD SlugOS/BE DEFINITIONS
 #----------------------------------------------------------------------------------
-DISTRO_NAME = "SlugOS/BE"
+DISTRO_NAME = "SlugOS"
 # DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
 # DISTRO_FEED = "unstable"
 DISTRO_TYPE = "beta"
-SLUGOS_DISTRO ?= "slugosbe"
-
-TARGET_ARCH = "armeb"
+TARGET_ARCH ?= "armeb"
 ARM_INSTRUCTION_SET = "arm"
 TARGET_OS = "linux"
 
@@ -25,14 +23,13 @@ TARGET_OS = "linux"
 # not absolutely required for boot.
 # NOTE: only jffs2 support is an absolute requirement of boot, even
 # the ext2/ext3 support is optional!
-SLUGOSBE_EXT2_PROGS =  "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks"
+SLUGOS_EXT2_PROGS =  "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks"
 
 # The standard firmware contents and additional packages built as requirements
-# of the firmware are defined here in SLUGOSBE_STANDARD_RDEPENDS and
-# SLUGOSBE_STANDARD_DEPENDS respectively.
-SLUGOSBE_STANDARD_RDEPENDS = ""
+# of the firmware are defined here in SLUGOS_STANDARD_RDEPENDS.
+SLUGOS_STANDARD_RDEPENDS = ""
 
-# Support for a variety of file systems is built in to the slugosbe
+# Support for a variety of file systems is built in to the slugos
 # image, programs to format disks with these file systems may be
 # added or removed.  By default ext2 and ext3 support
 # is included by the following lines.
@@ -40,12 +37,12 @@ SLUGOSBE_STANDARD_RDEPENDS = ""
 # These lines add support for formatting ext2 and ext3 file systems
 # on a hard disk attached to the NSLU2.  ext3 is the standard Linux
 # file system.
-SLUGOSBE_STANDARD_RDEPENDS += "${SLUGOSBE_EXT2_PROGS}"
+SLUGOS_STANDARD_RDEPENDS += "${SLUGOS_EXT2_PROGS}"
 
 # These lines add support for an X/Y/ZModem package called lrzsz
 # (this is of use for people with modified NSLU2 hardware which
 # supports a serial port.)
-SLUGOSBE_STANDARD_RDEPENDS += "lrzsz"
+SLUGOS_STANDARD_RDEPENDS += "lrzsz"
 
 # Filesystem selection.  Adding entries here adds the module to the
 # image.  The module must be built as part of nslu2-kernel (i.e. it
@@ -63,7 +60,7 @@ SLUGOSBE_STANDARD_RDEPENDS += "lrzsz"
 # NOTE: removing kernel-module-nfs from this list will prevent NFS
 # boot (however you can do a simple flash file system boot - no
 # attached disk - and install the nfs modules from ssh.)
-SLUGOSBE_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RDEPENDS += "\
 kernel-module-ext2 \
 kernel-module-jbd \
 kernel-module-ext3 \
@@ -76,24 +73,24 @@ kernel-module-nls-utf8 \
 "
 
 # Add daemon required for HW RNG support
-SLUGOSBE_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RDEPENDS += "\
 rng-tools \
 "
 
 # Add modules required for usb support
-SLUGOSBE_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RDEPENDS += "\
 kernel-module-ohci-hcd \
 kernel-module-uhci-hcd \
 "
 
 # Add modules required for IDE support
-SLUGOSBE_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RDEPENDS += "\
 kernel-module-libata \
 kernel-module-pata-artop \
 "
 
 # Add modules required for Network support
-SLUGOSBE_STANDARD_RDEPENDS += "\
+SLUGOS_STANDARD_RDEPENDS += "\
 kernel-module-via-velocity \
 "
 
@@ -107,9 +104,7 @@ kernel-module-via-velocity \
 # The 'standard' values are the defaults for the 'extra' packages added
 # to the firmware image.  None of these things are requirements to have
 # a bootable, useable, system however they *are* expected to be present
-# in SlugOS/BE - see nslu2-bag for a more minimal configuration and some
-# more instructions about how to make a non-slugosbe image.
-SLUGOSBE_EXTRA_RDEPENDS ?= ""
-SLUGOS_EXTRA_RDEPENDS = "${SLUGOSBE_STANDARD_RDEPENDS} ${SLUGOSBE_EXTRA_RDEPENDS}"
+# in SlugOS.
+SLUGOS_EXTRA_RDEPENDS = "${SLUGOS_STANDARD_RDEPENDS}"
 
 require conf/distro/include/slugos.inc
diff --git a/conf/distro/slugosle.conf b/conf/distro/slugosle.conf
deleted file mode 100644
index e703fe4553..0000000000
--- a/conf/distro/slugosle.conf
+++ /dev/null
@@ -1,115 +0,0 @@
-#@TYPE: Distribution
-#@NAME: SlugOS/LE
-#@DESCRIPTION: SlugOS/LE Linux Distribution for the NSLU2
-
-#----------------------------------------------------------------------------------
-# STANDARD SlugOS/LE DEFINITIONS
-#----------------------------------------------------------------------------------
-DISTRO_NAME = "SlugOS/LE"
-# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
-# DISTRO_FEED = "unstable"
-DISTRO_TYPE = "beta"
-SLUGOS_DISTRO ?= "slugosle"
-
-TARGET_ARCH = "arm"
-ARM_INSTRUCTION_SET = "arm"
-TARGET_OS = "linux"
-
-#----------------------------------------------------------------------------------
-# FIRMWARE CONFIGURATION
-#----------------------------------------------------------------------------------
-# EXTRA PACKAGES
-# --------------
-# Filesystem support modules are listed in here for easy removal,
-# as is the lrzsz serial package and other kernel modules which are
-# not absolutely required for boot.
-# NOTE: only jffs2 support is an absolute requirement of boot, even
-# the ext2/ext3 support is optional!
-SLUGOSLE_EXT2_PROGS =  "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks"
-
-# The standard firmware contents and additional packages built as requirements
-# of the firmware are defined here in SLUGOSLE_STANDARD_RDEPENDS and
-# SLUGOSLE_STANDARD_DEPENDS respectively.
-SLUGOSLE_STANDARD_RDEPENDS = ""
-
-# Support for a variety of file systems is built in to the slugosle
-# image, programs to format disks with these file systems may be
-# added or removed.  By default ext2 and ext3 support
-# is included by the following lines.
-# 
-# These lines add support for formatting ext2 and ext3 file systems
-# on a hard disk attached to the NSLU2.  ext3 is the standard Linux
-# file system.
-SLUGOSLE_STANDARD_RDEPENDS += "${SLUGOSLE_EXT2_PROGS}"
-
-# These lines add support for an X/Y/ZModem package called lrzsz
-# (this is of use for people with modified NSLU2 hardware which
-# supports a serial port.)
-SLUGOSLE_STANDARD_RDEPENDS += "lrzsz"
-
-# Filesystem selection.  Adding entries here adds the module to the
-# image.  The module must be built as part of nslu2-kernel (i.e. it
-# must be specified as a module in the defconfig file).  The NLS
-# support charset modules must be given explicitly and must match
-# the codepage/iocharset and NLS handling for the file systems which
-# require them.  The installed lanugage set is minimal but sufficient
-# for any file system (since it uses utf8).  See
-# http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems
-# for more information on the language behaviour of the DOS file
-# systems.
-#
-# KERNEL LEVEL FILE SYSTEM SUPPORT
-# --------------------------------
-# NOTE: removing kernel-module-nfs from this list will prevent NFS
-# boot (however you can do a simple flash file system boot - no
-# attached disk - and install the nfs modules from ssh.)
-SLUGOSLE_STANDARD_RDEPENDS += "\
-kernel-module-ext2 \
-kernel-module-jbd \
-kernel-module-ext3 \
-kernel-module-vfat \
-kernel-module-ntfs \
-kernel-module-isofs \
-kernel-module-udf \
-kernel-module-nls-cp437 \
-kernel-module-nls-utf8 \
-"
-
-# Add daemon required for HW RNG support
-SLUGOSLE_STANDARD_RDEPENDS += "\
-rng-tools \
-"
-
-# Add modules required for usb support
-SLUGOSLE_STANDARD_RDEPENDS += "\
-kernel-module-ohci-hcd \
-kernel-module-uhci-hcd \
-"
-
-# Add modules required for IDE support
-SLUGOSLE_STANDARD_RDEPENDS += "\
-kernel-module-libata \
-kernel-module-pata-artop \
-"
-
-# Add modules required for Network support
-OPENSLUG_STANDARD_RDEPENDS += "\
-kernel-module-via-velocity \
-"
-
-# This documents other file systems which are built but not installed
-# by default in the flash image.
-#
-# kernel-module-msdos - mounts a FAT file system without long file names
-#                       (use kernel-module-vfat, it shows the long names
-#                       if present.)
-
-# The 'standard' values are the defaults for the 'extra' packages added
-# to the firmware image.  None of these things are requirements to have
-# a bootable, useable, system however they *are* expected to be present
-# in Slugosle - see slugos-lag for a more minimal configuration and some
-# more instructions about how to make a non-slugosle image.
-SLUGOSLE_EXTRA_RDEPENDS ?= ""
-SLUGOS_EXTRA_RDEPENDS = "${SLUGOSLE_STANDARD_RDEPENDS} ${SLUGOSLE_EXTRA_RDEPENDS}"
-
-require conf/distro/include/slugos.inc
diff --git a/conf/distro/ucslugc.conf b/conf/distro/ucslugc.conf
index 526b8f11b4..8b64746fe3 100644
--- a/conf/distro/ucslugc.conf
+++ b/conf/distro/ucslugc.conf
@@ -3,11 +3,7 @@
 #@DESCRIPTION: UcSlugC Linux Distribution for the NSLU2
 
 DISTRO_NAME = "UcSlugC"
-# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}"
-# DISTRO_FEED = "unstable"
-DISTRO_TYPE = "beta"
-SLUGOS_DISTRO = "ucslugc"
-
+IMAGE_BASENAME = "ucslugc"
 TARGET_ARCH = "armeb"
 ARM_INSTRUCTION_SET = "thumb"
 TARGET_OS = "linux-uclibc"