diff options
Diffstat (limited to 'conf/distro/slugosle.conf')
| -rw-r--r-- | conf/distro/slugosle.conf | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/conf/distro/slugosle.conf b/conf/distro/slugosle.conf new file mode 100644 index 0000000000..e703fe4553 --- /dev/null +++ b/conf/distro/slugosle.conf @@ -0,0 +1,115 @@ +#@TYPE: Distribution +#@NAME: SlugOS/LE +#@DESCRIPTION: SlugOS/LE Linux Distribution for the NSLU2 + +#---------------------------------------------------------------------------------- +# STANDARD SlugOS/LE DEFINITIONS +#---------------------------------------------------------------------------------- +DISTRO_NAME = "SlugOS/LE" +# DISTRO_VERSION = "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}" +# DISTRO_FEED = "unstable" +DISTRO_TYPE = "beta" +SLUGOS_DISTRO ?= "slugosle" + +TARGET_ARCH = "arm" +ARM_INSTRUCTION_SET = "arm" +TARGET_OS = "linux" + +#---------------------------------------------------------------------------------- +# FIRMWARE CONFIGURATION +#---------------------------------------------------------------------------------- +# EXTRA PACKAGES +# -------------- +# Filesystem support modules are listed in here for easy removal, +# as is the lrzsz serial package and other kernel modules which are +# not absolutely required for boot. +# NOTE: only jffs2 support is an absolute requirement of boot, even +# the ext2/ext3 support is optional! +SLUGOSLE_EXT2_PROGS = "e2fsprogs-mke2fs e2fsprogs-fsck e2fsprogs-e2fsck e2fsprogs-badblocks" + +# The standard firmware contents and additional packages built as requirements +# of the firmware are defined here in SLUGOSLE_STANDARD_RDEPENDS and +# SLUGOSLE_STANDARD_DEPENDS respectively. +SLUGOSLE_STANDARD_RDEPENDS = "" + +# Support for a variety of file systems is built in to the slugosle +# image, programs to format disks with these file systems may be +# added or removed. By default ext2 and ext3 support +# is included by the following lines. +# +# These lines add support for formatting ext2 and ext3 file systems +# on a hard disk attached to the NSLU2. ext3 is the standard Linux +# file system. +SLUGOSLE_STANDARD_RDEPENDS += "${SLUGOSLE_EXT2_PROGS}" + +# These lines add support for an X/Y/ZModem package called lrzsz +# (this is of use for people with modified NSLU2 hardware which +# supports a serial port.) +SLUGOSLE_STANDARD_RDEPENDS += "lrzsz" + +# Filesystem selection. Adding entries here adds the module to the +# image. The module must be built as part of nslu2-kernel (i.e. it +# must be specified as a module in the defconfig file). The NLS +# support charset modules must be given explicitly and must match +# the codepage/iocharset and NLS handling for the file systems which +# require them. The installed lanugage set is minimal but sufficient +# for any file system (since it uses utf8). See +# http://www.nslu2-linux.orgwiki/HowTo/MountFATFileSystems +# for more information on the language behaviour of the DOS file +# systems. +# +# KERNEL LEVEL FILE SYSTEM SUPPORT +# -------------------------------- +# NOTE: removing kernel-module-nfs from this list will prevent NFS +# boot (however you can do a simple flash file system boot - no +# attached disk - and install the nfs modules from ssh.) +SLUGOSLE_STANDARD_RDEPENDS += "\ +kernel-module-ext2 \ +kernel-module-jbd \ +kernel-module-ext3 \ +kernel-module-vfat \ +kernel-module-ntfs \ +kernel-module-isofs \ +kernel-module-udf \ +kernel-module-nls-cp437 \ +kernel-module-nls-utf8 \ +" + +# Add daemon required for HW RNG support +SLUGOSLE_STANDARD_RDEPENDS += "\ +rng-tools \ +" + +# Add modules required for usb support +SLUGOSLE_STANDARD_RDEPENDS += "\ +kernel-module-ohci-hcd \ +kernel-module-uhci-hcd \ +" + +# Add modules required for IDE support +SLUGOSLE_STANDARD_RDEPENDS += "\ +kernel-module-libata \ +kernel-module-pata-artop \ +" + +# Add modules required for Network support +OPENSLUG_STANDARD_RDEPENDS += "\ +kernel-module-via-velocity \ +" + +# This documents other file systems which are built but not installed +# by default in the flash image. +# +# kernel-module-msdos - mounts a FAT file system without long file names +# (use kernel-module-vfat, it shows the long names +# if present.) + +# The 'standard' values are the defaults for the 'extra' packages added +# to the firmware image. None of these things are requirements to have +# a bootable, useable, system however they *are* expected to be present +# in Slugosle - see slugos-lag for a more minimal configuration and some +# more instructions about how to make a non-slugosle image. +SLUGOSLE_EXTRA_RDEPENDS ?= "" +SLUGOS_EXTRA_RDEPENDS = "${SLUGOSLE_STANDARD_RDEPENDS} ${SLUGOSLE_EXTRA_RDEPENDS}" + +require conf/distro/include/slugos.inc |