diff options
Diffstat (limited to 'conf/distro/include/slugos.conf')
| -rw-r--r-- | conf/distro/include/slugos.conf | 195 |
1 files changed, 0 insertions, 195 deletions
diff --git a/conf/distro/include/slugos.conf b/conf/distro/include/slugos.conf deleted file mode 100644 index c2b169106f..0000000000 --- a/conf/distro/include/slugos.conf +++ /dev/null @@ -1,195 +0,0 @@ -#@TYPE: Distribution -#@NAME: SlugOS -#@DESCRIPTION: SlugOS Linux Distribution for the NSLU2 - -# WARNING: this file should not be used directly, use one of -# the supported slugos-???.conf instead: - -# Explanation of the naming -# -# slugos-dist - the base distro configuration for an NSLU2 -# slugos-[bl][at][gu] - a specific configuration encoded as follows: -# -# b or l - big or little endian -# set ARCH_BYTE_SEX to match -# -# a or t - ARM or Thumb instructions in the low level libraries -# set ARM_INSTRUCTION_SET to match -# -# g or u - glibc or uclibc libc implementation -# set TARGET_OS to match -# -# The following names are deprecated: -# -# openslug - the historical name of a canonical slugos-bag distro -# also the name of a standard slugos-bag distro with a package feed -# ucslugc - the historical (and obsolete) name of slugos-btu -# also the name of a standard slugos-btu distro with a package feed -# - -#---------------------------------------------------------------------------------- -# STANDARD SLUGOS DEFINITIONS -#---------------------------------------------------------------------------------- -# The following must be set in the top level distro file: -# -#DISTRO_NAME -#DISTRO_TYPE - -# The following may be overridden to make sub-versions -SLUGOS_VERSION = "4.0" -DISTRO_REVISION ?= "" -DISTRO_VERSION ?= "${SLUGOS_VERSION}${DISTRO_REVISION}-${DISTRO_TYPE}" -# For release (only): -# DISTRO_FEED ?= "${SLUGOS_VERSION}-${DISTRO_TYPE}" -DISTRO_FEED ?= "unstable" - -# The following must also be set, they define the basic format of the build -# -#ARCH_BYTE_SEX "be" or "le" -#ARM_INSTRUCTION_SET "arm" or "thumb" -#TARGET_OS "linux" or "linux-uclibc" -#SLUGOS_IMAGESEX "big-endian" or "little-endian" (JFFS2 format) - -# The following need not be set, the defaults should be adequate -#USE_NLS = "no" or "yes" -USE_NLS ?= "no" - -# To make errors easier to identify: -DISTRO_NAME ?= "INVALID-${ARCH_BYTE_SEX}-${ARM_INSTRUCTION_SET}-${TARGET_OS}" -DISTRO_TYPE ?= "INVALID" - -# The following must not be changed. -TARGET_FPU = "soft" - -# glib-2.0 builds require USE_NLS to be overridden -USE_NLS_glib-2.0 = "yes" - -INHERIT += "package_ipk debian" - -DISTRO_BASE = ":slugos" - -# packages/meta/slugos-image.bb generates a binary image of the root file system -# with a name controlled by the following setting - it defaults to the top level -# ${DISTRO_NAME} and this should always be correct, but it may be too specific (e.g. -# if you change the DISTRO from one of the standard ones in a way which does not -# change the generated image). -SLUGOS_IMAGENAME ?= "${DISTRO_NAME}" - -# pull in the frozen list of bbfiles - this sets BBFILES and this will override any -# setting in local.conf Since this depends on ${DISTRO} it doesn't actually do -# anything by default unless conf/distro/${DISTRO}-packages.conf exists. -# require conf/distro/include/freeze.conf - -#---------------------------------------------------------------------------------- -# FEEDS -# The FEED_URIS lines define where on the internet SlugOS looks for packages -# when downloading new packages or updating existing packages. Additional feeds -# (such as a local feed) can be defined in local.conf -#---------------------------------------------------------------------------------- -# Add to the user's feeds from local.conf (there may be none). -# In general slugos-[bl][at][gu] is sufficient to identify a set of packages which -# will work on any derived distro. The slugos-???.conf files set the FEED_URIS to -# an appropriate ipkg.nslu2-linux.org default if nslu2-linux is actually building -# such a feed: -# -#FEED_URIS_append += "cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/cross/${DISTRO_FEED}" -#FEED_URIS_append += "native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/native/${DISTRO_FEED}" -# -# When such a feed exists the corresponding 'unstable' feed will normally also -# exist - the packages in unstable are the latest but very unlikely to be the -# greatest. Use at your own risk! -# -#FEED_URIS_append += "unstable_cross##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/cross/unstable" -#FEED_URIS_append += "unstable_native##http://ipkg.nslu2-linux.org/feeds/${SLUGOS-foo}/native/unstable" - -#---------------------------------------------------------------------------------- -# FIRMWARE CONFIGURATION -#---------------------------------------------------------------------------------- -# IMAGE BUILD OPTIONS -# ------------------- -# CMDLINE* macros define the kernel command line. CMDLINE_DEBUG is provided -# to enable/disable debugging in the distro. Here noirqdebug is used to -# remove the messages about unhandled interrupts - people debugging interrupt -# issues in the kernel need to cancel this (set CMDLINE_DEBUG empty in local.conf) -CMDLINE_DEBUG = "noirqdebug" - -# Building a full image. If you set SLUGOS_FLASH_IMAGE to "yes" a complete -# 8MByte flash image will be built after the rootfs JFFS2 image. -# -# If you do this you will need to find a source for the LinkSys software to be -# placed in the full image - 'RedBoot' (the boot loader), 'Trailer' (just a bunch -# of bytes to flag the image as valid) and 'SysConf' (actually just a block of -# unset data - you could modify this to pre-configure the SysConf partition of the -# image). If you own an NSLU2 then this data is already in the flash of the NSLU2 -# and you can download it (including new versions) from the LinkSys web site - see -# packages/meta/slugos-image.bb for information about where to put the downloaded -# data. -SLUGOS_FLASH_IMAGE ?= "no" - -# EXTRA PACKAGES -# -------------- -# SlugOS builds an image with no extra packages - to add packages to the -# firmware include this file in a new 'distro' configuration file) and set -# the definition below to include the requirements. -# NOTE: as built this system will *not* be able to boot off anything other than -# the flash file system ('turnup' will not work). You need to add the filesystem -# modules for your chosen root file system (and any others which will be used). -# See openslug.conf for a more full-featured system! -# -# Everything in this list gets added to the flash image, along with any RDEPENDS -# it has itself! -SLUGOS_EXTRA_RDEPENDS ?= "" - -#---------------------------------------------------------------------------------- -# PACKAGE VERSION CONTROL -#---------------------------------------------------------------------------------- -# Define how to bootstrap the system - we need cross compilers. It is also -# necessary to define which gets generated first, glibc or the kernel, and -# this is done by selecting the provider of libc (in this case it needs the -# kernel, so there has to be a non-libc gcc to build the kernel!) -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial" -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}gcc:gcc-cross" -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}g++:gcc-cross" -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc" -# Select 2.6 versions of the depmod support -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross" -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}libc-for-gcc:glibc" - -# compiler/binary/library versions (unslung uses different ones so these -# cannot be in ${MACHINE}.conf) -PREFERRED_VERSION_binutils ?= "2.16" -PREFERRED_VERSION_binutils-cross ?= "2.16" -PREFERRED_VERSION_gcc-cross-initial ?= "4.1.1" -PREFERRED_VERSION_gcc-cross ?= "4.1.1" -PREFERRED_VERSION_gcc ?= "4.1.1" -PREFERRED_VERSION_glibc ?= "2.3.5+cvs20050627" -#For SVN uclibc: -#SRCDATE_uclibc ?= "20060120" -#PREFERRED_VERSION_uclibc ?= "0.9.28+svn${SRCDATE_uclibc}" - -# Select the correct versions of the kernel and modules (these are the -# defaults, override in the conf/distro top-level distro file). -PREFERRED_PROVIDER_virtual/kernel ?= "ixp4xx-kernel" -PREFERRED_VERSION_ixp4xx-kernel ?= "2.6.17" - -# Built-in ethernet modules -PREFERRED_PROVIDER_virtual/ixp-eth ?= "ixp400-eth" -PREFERRED_VERSION_ixp4xx-csr ?= "2.1" -PREFERRED_VERSION_ixp-osal ?= "2.1" -PREFERRED_VERSION_ixp400-eth ?= "1.5" - -# Select the smallest provider of x11 libraries -PREFERRED_PROVIDER_libx11 ?= "diet-x11" -SRCDATE_diet-x11 ?= "20060106" - -# Latest wpa-supplicant which supports madwifi-ng -PREFERRED_VERSION_wpa-supplicant ?= "0.5.1" - -# Ensure consistency across all SlugOS builds for the provider of a -# relational database - use the latest version of the SleepyCat -# Berkeley database -PREFERRED_PROVIDER_virtual/db = "db" -PREFERRED_PROVIDER_virtual/db-native = "db-native" - -#FIXME: HACK: REMOVE THIS -IGNORE_STRIP_ERRORS = "" |