diff options
20 files changed, 0 insertions, 3502 deletions
diff --git a/packages/linux/nas100d-kernel/2.6.14/.mtn2git_empty b/packages/linux/nas100d-kernel/2.6.14/.mtn2git_empty deleted file mode 100644 index e69de29bb2..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/.mtn2git_empty +++ /dev/null diff --git a/packages/linux/nas100d-kernel/2.6.14/10-ixp4xx-copy-from.patch b/packages/linux/nas100d-kernel/2.6.14/10-ixp4xx-copy-from.patch deleted file mode 100644 index f3da2e093f..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/10-ixp4xx-copy-from.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700 -+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700 -@@ -38,10 +38,14 @@ - #define BYTE1(h) ((h) & 0xFF) - #endif - -+#define FLASHWORD(a) (*(__u16*)(a)) -+#define FLASHVAL(a) FLASHWORD(a) -+#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0) -+ - static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) - { - map_word val; -- val.x[0] = *(__u16 *) (map->map_priv_1 + ofs); -+ val.x[0] = FLASHVAL(map->map_priv_1 + ofs); - return val; - } - -@@ -53,19 +57,25 @@ static map_word ixp4xx_read16(struct map - static void ixp4xx_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) - { -- int i; -- u8 *dest = (u8 *) to; -- u16 *src = (u16 *) (map->map_priv_1 + from); -- u16 data; -- -- for (i = 0; i < (len / 2); i++) { -- data = src[i]; -- dest[i * 2] = BYTE0(data); -- dest[i * 2 + 1] = BYTE1(data); -+ u8 *dest, *src; -+ -+ if (len <= 0) -+ return; -+ -+ dest = (u8 *) to; -+ src = (u8 *) (map->map_priv_1 + from); -+ if (from & 1) -+ *dest++ = BYTE1(FLASHVAL(src-1)), ++src, --len; -+ -+ while (len >= 2) { -+ u16 data = FLASHVAL(src); src += 2; -+ *dest++ = BYTE0(data); -+ *dest++ = BYTE1(data); -+ len -= 2; - } - -- if (len & 1) -- dest[len - 1] = BYTE0(src[i]); -+ if (len > 0) -+ *dest++ = BYTE0(FLASHVAL(src)); - } - - /* -@@ -75,7 +85,7 @@ static void ixp4xx_copy_from(struct map_ - static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr) - { - if (!(adr & 1)) -- *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; -+ FLASHSET(map->map_priv_1 + adr, d.x[0]); - } - - /* -@@ -83,7 +93,7 @@ static void ixp4xx_probe_write16(struct - */ - static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr) - { -- *(__u16 *) (map->map_priv_1 + adr) = d.x[0]; -+ FLASHSET(map->map_priv_1 + adr, d.x[0]); - } - - struct ixp4xx_flash_info { diff --git a/packages/linux/nas100d-kernel/2.6.14/10-ixp4xx-le.patch b/packages/linux/nas100d-kernel/2.6.14/10-ixp4xx-le.patch deleted file mode 100644 index 0b50e4e1a0..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/10-ixp4xx-le.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-27 17:02:08.000000000 -0700 -+++ linux-2.6.14/drivers/mtd/maps/ixp4xx.c 2005-10-29 23:11:24.990820968 -0700 -@@ -22,6 +22,7 @@ - #include <linux/string.h> - #include <linux/mtd/mtd.h> - #include <linux/mtd/map.h> -+#include <linux/mtd/cfi_endian.h> - #include <linux/mtd/partitions.h> - #include <linux/ioport.h> - #include <linux/device.h> -@@ -30,17 +31,40 @@ - - #include <linux/reboot.h> - -+/* On a little-endian IXP4XX system (tested on NSLU2) an LDRH or STRH -+ * will flip the second address bit - i.e. XOR the address with 10b. -+ * This causes the cfi commands (sent to the command address, 0xAA for -+ * 16 bit flash) to fail. This is fixed here by XOR'ing the address -+ * before use with 10b. The cost of this is that the flash layout ends -+ * up with pdp-endiannes (on an LE system), however this is not a problem -+ * as the access code consistently only accesses half words - so the -+ * endianness is not determinable on stuff which is written and read -+ * consistently in the little endian world. -+ * -+ * For flash data from the big-endian world, however, the results are -+ * weird - the pdp-endianness results in the data apparently being -+ * 2-byte swapped (as in dd conv=swab). To work round this the 16 -+ * bit values are written and read using cpu_to_cfi16 and cfi16_to_cpu, -+ * by default these are no-ops, but if the MTD driver is configed with -+ * CONFIG_MTD_CFI_BE_BYTE_SWAP the macros will byte swap the data, -+ * resulting in a consistently BE view of the flash on both BE (no -+ * op) and LE systems. This config setting also causes the command -+ * data from the CFI implementation to get swapped - as is required -+ * so that this code will *unswap* it and give the correct command -+ * data to the flash. -+ */ - #ifndef __ARMEB__ - #define BYTE0(h) ((h) & 0xFF) - #define BYTE1(h) (((h) >> 8) & 0xFF) -+#define FLASHWORD(a) (*(__u16*)((u32)(a) ^ 2)) - #else - #define BYTE0(h) (((h) >> 8) & 0xFF) - #define BYTE1(h) ((h) & 0xFF) -+#define FLASHWORD(a) (*(__u16*)(a)) - #endif - --#define FLASHWORD(a) (*(__u16*)(a)) --#define FLASHVAL(a) FLASHWORD(a) --#define FLASHSET(a,v) do { FLASHWORD(a) = (v); } while (0) -+#define FLASHVAL(a) cfi16_to_cpu(FLASHWORD(a)) -+#define FLASHSET(a,v) (FLASHWORD(a) = cpu_to_cfi16(v)) - - static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs) - { diff --git a/packages/linux/nas100d-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch b/packages/linux/nas100d-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch deleted file mode 100644 index 37d19bd1b0..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/10-mtdpart-redboot-fis-byteswap.patch +++ /dev/null @@ -1,44 +0,0 @@ -On IXP4XX systems the FIS directory is big endian even with a little -endian kernel. This patch recognises the FIS directory on such a -system and byte swaps it to obtain a valid table based on the 'size' -field of the FIS directory (the size field is know to always match the -erase block size on such systems, and probably all systems.) - ---- linux-2.6.13/.pc/10-mtdpart-redboot-fis-byteswap.patch/drivers/mtd/redboot.c 2005-08-28 16:41:01.000000000 -0700 -+++ linux-2.6.13/drivers/mtd/redboot.c 2005-10-23 21:44:59.999694674 -0700 -@@ -89,8 +89,34 @@ - i = numslots; - break; - } -- if (!memcmp(buf[i].name, "FIS directory", 14)) -+ if (!memcmp(buf[i].name, "FIS directory", 14)) { -+ /* This is apparently the FIS directory entry for the -+ * FIS directory itself. The FIS directory size is -+ * one erase block, if the buf[i].size field is -+ * swab32(erasesize) then we know we are looking at -+ * a byte swapped FIS directory - swap all the entries! -+ * (NOTE: this is 'size' not 'data_length', size is -+ * the full size of the entry.) -+ */ -+ if (swab32(buf[i].size) == master->erasesize) { -+ int j; -+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) { -+ /* The unsigned long fields were written with the -+ * wrong byte sex, name and pad have no byte sex. -+ */ -+# define do_swab32(x) (x) = swab32(x) -+ do_swab32(buf[j].flash_base); -+ do_swab32(buf[j].mem_base); -+ do_swab32(buf[j].size); -+ do_swab32(buf[j].entry_point); -+ do_swab32(buf[j].data_length); -+ do_swab32(buf[j].desc_cksum); -+ do_swab32(buf[j].file_cksum); -+# undef do_swab32 -+ } -+ } - break; -+ } - } - if (i == numslots) { - /* Didn't find it */ diff --git a/packages/linux/nas100d-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch b/packages/linux/nas100d-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch deleted file mode 100644 index 6ac0807f1e..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/15-ixp4xx-writesb-l-w.patch +++ /dev/null @@ -1,31 +0,0 @@ -# The inline caller of these APIs were changed to have -# const vaddr parameters... ---- linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h.orig 2005-09-24 17:06:19.968099976 -0700 -+++ linux-2.6.13/include/asm-arm/arch-ixp4xx/io.h 2005-09-24 17:06:52.542149731 -0700 -@@ -113,7 +113,7 @@ - } - - static inline void --__ixp4xx_writesb(u32 bus_addr, u8 *vaddr, int count) -+__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count) - { - while (count--) - writeb(*vaddr++, bus_addr); -@@ -136,7 +136,7 @@ - } - - static inline void --__ixp4xx_writesw(u32 bus_addr, u16 *vaddr, int count) -+__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count) - { - while (count--) - writew(*vaddr++, bus_addr); -@@ -154,7 +154,7 @@ - } - - static inline void --__ixp4xx_writesl(u32 bus_addr, u32 *vaddr, int count) -+__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count) - { - while (count--) - writel(*vaddr++, bus_addr); diff --git a/packages/linux/nas100d-kernel/2.6.14/18-ixp4xx-io-h-addr.patch b/packages/linux/nas100d-kernel/2.6.14/18-ixp4xx-io-h-addr.patch deleted file mode 100644 index 5813bbb7ac..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/18-ixp4xx-io-h-addr.patch +++ /dev/null @@ -1,287 +0,0 @@ ---- linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:33:21.757679882 -0700 -+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/io.h 2005-10-29 23:47:02.581331058 -0700 -@@ -80,9 +80,9 @@ __ixp4xx_iounmap(void __iomem *addr) - #define __arch_ioremap(a, s, f, x) __ixp4xx_ioremap(a, s, f, x) - #define __arch_iounmap(a) __ixp4xx_iounmap(a) - --#define writeb(p, v) __ixp4xx_writeb(p, v) --#define writew(p, v) __ixp4xx_writew(p, v) --#define writel(p, v) __ixp4xx_writel(p, v) -+#define writeb(v, p) __ixp4xx_writeb(v, p) -+#define writew(v, p) __ixp4xx_writew(v, p) -+#define writel(v, p) __ixp4xx_writel(v, p) - - #define writesb(p, v, l) __ixp4xx_writesb(p, v, l) - #define writesw(p, v, l) __ixp4xx_writesw(p, v, l) -@@ -97,8 +97,9 @@ __ixp4xx_iounmap(void __iomem *addr) - #define readsl(p, v, l) __ixp4xx_readsl(p, v, l) - - static inline void --__ixp4xx_writeb(u8 value, u32 addr) -+__ixp4xx_writeb(u8 value, volatile void __iomem *p) - { -+ u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) { -@@ -113,15 +114,16 @@ __ixp4xx_writeb(u8 value, u32 addr) - } - - static inline void --__ixp4xx_writesb(u32 bus_addr, const u8 *vaddr, int count) -+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count) - { - while (count--) - writeb(*vaddr++, bus_addr); - } - - static inline void --__ixp4xx_writew(u16 value, u32 addr) -+__ixp4xx_writew(u16 value, volatile void __iomem *p) - { -+ u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) { -@@ -136,15 +138,16 @@ __ixp4xx_writew(u16 value, u32 addr) - } - - static inline void --__ixp4xx_writesw(u32 bus_addr, const u16 *vaddr, int count) -+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) - { - while (count--) - writew(*vaddr++, bus_addr); - } - - static inline void --__ixp4xx_writel(u32 value, u32 addr) -+__ixp4xx_writel(u32 value, volatile void __iomem *p) - { -+ u32 addr = (u32)p; - if (addr >= VMALLOC_START) { - __raw_writel(value, addr); - return; -@@ -154,15 +157,16 @@ __ixp4xx_writel(u32 value, u32 addr) - } - - static inline void --__ixp4xx_writesl(u32 bus_addr, const u32 *vaddr, int count) -+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count) - { - while (count--) - writel(*vaddr++, bus_addr); - } - - static inline unsigned char --__ixp4xx_readb(u32 addr) -+__ixp4xx_readb(const volatile void __iomem *p) - { -+ u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) -@@ -177,15 +181,16 @@ __ixp4xx_readb(u32 addr) - } - - static inline void --__ixp4xx_readsb(u32 bus_addr, u8 *vaddr, u32 count) -+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count) - { - while (count--) - *vaddr++ = readb(bus_addr); - } - - static inline unsigned short --__ixp4xx_readw(u32 addr) -+__ixp4xx_readw(const volatile void __iomem *p) - { -+ u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (addr >= VMALLOC_START) -@@ -200,15 +205,16 @@ __ixp4xx_readw(u32 addr) - } - - static inline void --__ixp4xx_readsw(u32 bus_addr, u16 *vaddr, u32 count) -+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) - { - while (count--) - *vaddr++ = readw(bus_addr); - } - - static inline unsigned long --__ixp4xx_readl(u32 addr) -+__ixp4xx_readl(const volatile void __iomem *p) - { -+ u32 addr = (u32)p; - u32 data; - - if (addr >= VMALLOC_START) -@@ -221,7 +227,7 @@ __ixp4xx_readl(u32 addr) - } - - static inline void --__ixp4xx_readsl(u32 bus_addr, u32 *vaddr, u32 count) -+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) - { - while (count--) - *vaddr++ = readl(bus_addr); -@@ -239,7 +245,7 @@ __ixp4xx_readsl(u32 bus_addr, u32 *vaddr - eth_copy_and_sum((s),__mem_pci(c),(l),(b)) - - static inline int --check_signature(unsigned long bus_addr, const unsigned char *signature, -+check_signature(const unsigned char __iomem *bus_addr, const unsigned char *signature, - int length) - { - int retval = 0; -@@ -389,7 +395,7 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u - #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ - ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) - static inline unsigned int --__ixp4xx_ioread8(void __iomem *addr) -+__ixp4xx_ioread8(const void __iomem *addr) - { - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) -@@ -398,12 +404,12 @@ __ixp4xx_ioread8(void __iomem *addr) - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return (unsigned int)__raw_readb(port); - #else -- return (unsigned int)__ixp4xx_readb(port); -+ return (unsigned int)__ixp4xx_readb(addr); - #endif - } - - static inline void --__ixp4xx_ioread8_rep(void __iomem *addr, void *vaddr, u32 count) -+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) - { - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) -@@ -412,12 +418,12 @@ __ixp4xx_ioread8_rep(void __iomem *addr, - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsb(addr, vaddr, count); - #else -- __ixp4xx_readsb(port, vaddr, count); -+ __ixp4xx_readsb(addr, vaddr, count); - #endif - } - - static inline unsigned int --__ixp4xx_ioread16(void __iomem *addr) -+__ixp4xx_ioread16(const void __iomem *addr) - { - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) -@@ -426,12 +432,12 @@ __ixp4xx_ioread16(void __iomem *addr) - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le16_to_cpu(__raw_readw((u32)port)); - #else -- return (unsigned int)__ixp4xx_readw((u32)port); -+ return (unsigned int)__ixp4xx_readw(addr); - #endif - } - - static inline void --__ixp4xx_ioread16_rep(void __iomem *addr, void *vaddr, u32 count) -+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count) - { - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) -@@ -440,12 +446,12 @@ __ixp4xx_ioread16_rep(void __iomem *addr - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsw(addr, vaddr, count); - #else -- __ixp4xx_readsw(port, vaddr, count); -+ __ixp4xx_readsw(addr, vaddr, count); - #endif - } - - static inline unsigned int --__ixp4xx_ioread32(void __iomem *addr) -+__ixp4xx_ioread32(const void __iomem *addr) - { - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) -@@ -454,13 +460,13 @@ __ixp4xx_ioread32(void __iomem *addr) - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le32_to_cpu(__raw_readl((u32)port)); - #else -- return (unsigned int)__ixp4xx_readl((u32)port); -+ return (unsigned int)__ixp4xx_readl(addr); - #endif - } - } - - static inline void --__ixp4xx_ioread32_rep(void __iomem *addr, void *vaddr, u32 count) -+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count) - { - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) -@@ -469,7 +475,7 @@ __ixp4xx_ioread32_rep(void __iomem *addr - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsl(addr, vaddr, count); - #else -- __ixp4xx_readsl(port, vaddr, count); -+ __ixp4xx_readsl(addr, vaddr, count); - #endif - } - -@@ -483,7 +489,7 @@ __ixp4xx_iowrite8(u8 value, void __iomem - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writeb(value, port); - #else -- __ixp4xx_writeb(value, port); -+ __ixp4xx_writeb(value, addr); - #endif - } - -@@ -497,7 +503,7 @@ __ixp4xx_iowrite8_rep(void __iomem *addr - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesb(addr, vaddr, count); - #else -- __ixp4xx_writesb(port, vaddr, count); -+ __ixp4xx_writesb(addr, vaddr, count); - #endif - } - -@@ -511,7 +517,7 @@ __ixp4xx_iowrite16(u16 value, void __iom - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writew(cpu_to_le16(value), addr); - #else -- __ixp4xx_writew(value, port); -+ __ixp4xx_writew(value, addr); - #endif - } - -@@ -525,7 +531,7 @@ __ixp4xx_iowrite16_rep(void __iomem *add - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesw(addr, vaddr, count); - #else -- __ixp4xx_writesw(port, vaddr, count); -+ __ixp4xx_writesw(addr, vaddr, count); - #endif - } - -@@ -539,7 +545,7 @@ __ixp4xx_iowrite32(u32 value, void __iom - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writel(cpu_to_le32(value), port); - #else -- __ixp4xx_writel(value, port); -+ __ixp4xx_writel(value, addr); - #endif - } - -@@ -553,7 +559,7 @@ __ixp4xx_iowrite32_rep(void __iomem *add - #ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesl(addr, vaddr, count); - #else -- __ixp4xx_writesl(port, vaddr, count); -+ __ixp4xx_writesl(addr, vaddr, count); - #endif - } - diff --git a/packages/linux/nas100d-kernel/2.6.14/28-spinlock-up.patch b/packages/linux/nas100d-kernel/2.6.14/28-spinlock-up.patch deleted file mode 100644 index 3ae5178cff..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/28-spinlock-up.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- linux-2.6.14-rc5/include/linux/spinlock_up.h 2005-10-26 08:37:20.164248408 -0700 -+++ patched/include/linux/spinlock_up.h 2005-10-26 12:15:13.458898975 -0700 -@@ -47,6 +47,14 @@ static inline void __raw_spin_unlock(raw - lock->slock = 1; - } - -+#else /* DEBUG_SPINLOCK */ -+#define __raw_spin_is_locked(lock) ((void)(lock), 0) -+/* for sched.c and kernel_lock.c: */ -+# define __raw_spin_lock(lock) do { (void)(lock); } while (0) -+# define __raw_spin_unlock(lock) do { (void)(lock); } while (0) -+# define __raw_spin_trylock(lock) ({ (void)(lock); 1; }) -+#endif /* DEBUG_SPINLOCK */ -+ - /* - * Read-write spinlocks. No debug version. - */ -@@ -57,14 +65,6 @@ static inline void __raw_spin_unlock(raw - #define __raw_read_unlock(lock) do { (void)(lock); } while (0) - #define __raw_write_unlock(lock) do { (void)(lock); } while (0) - --#else /* DEBUG_SPINLOCK */ --#define __raw_spin_is_locked(lock) ((void)(lock), 0) --/* for sched.c and kernel_lock.c: */ --# define __raw_spin_lock(lock) do { (void)(lock); } while (0) --# define __raw_spin_unlock(lock) do { (void)(lock); } while (0) --# define __raw_spin_trylock(lock) ({ (void)(lock); 1; }) --#endif /* DEBUG_SPINLOCK */ -- - #define __raw_read_can_lock(lock) (((void)(lock), 1)) - #define __raw_write_can_lock(lock) (((void)(lock), 1)) - diff --git a/packages/linux/nas100d-kernel/2.6.14/29-ipv4-route-c-spinlock.patch b/packages/linux/nas100d-kernel/2.6.14/29-ipv4-route-c-spinlock.patch deleted file mode 100644 index 93e070518c..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/29-ipv4-route-c-spinlock.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.14-rc5/net/ipv4/route.c 2005-10-26 08:37:20.752285410 -0700 -+++ patched/net/ipv4/route.c 2005-10-26 12:17:00.761651111 -0700 -@@ -231,7 +231,7 @@ static spinlock_t *rt_hash_locks; - spin_lock_init(&rt_hash_locks[i]); \ - } - #else --# define rt_hash_lock_addr(slot) NULL -+# define rt_hash_lock_addr(slot) ((spinlock_t*)NULL) - # define rt_hash_lock_init() - #endif - diff --git a/packages/linux/nas100d-kernel/2.6.14/50-nas100d-arch.patch b/packages/linux/nas100d-kernel/2.6.14/50-nas100d-arch.patch deleted file mode 100644 index 51ab586010..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/50-nas100d-arch.patch +++ /dev/null @@ -1,64 +0,0 @@ - arch/arm/mach-ixp4xx/Kconfig | 8 ++++++++ - arch/arm/mach-ixp4xx/Makefile | 1 + - arch/arm/tools/mach-types | 1 + - include/asm-arm/arch-ixp4xx/hardware.h | 1 + - include/asm-arm/arch-ixp4xx/irqs.h | 9 +++++++++ - 5 files changed, 20 insertions(+) - ---- linux-2.6.14.orig/arch/arm/mach-ixp4xx/Kconfig 2005-11-09 00:58:58.000000000 +0100 -+++ linux-2.6.14/arch/arm/mach-ixp4xx/Kconfig 2005-11-11 22:23:08.000000000 +0100 -@@ -61,6 +61,14 @@ config ARCH_PRPMC1100 - PrPCM1100 Processor Mezanine Module. For more information on - this platform, see <file:Documentation/arm/IXP4xx>. - -+config MACH_NAS100D -+ bool -+ prompt "NAS100D" -+ help -+ Say 'Y' here if you want your kernel to support Iomega's -+ NAS 100d device. For more information on this platform, -+ see http://www.nslu2-linux.org/wiki/NAS100d/HomePage -+ - # - # Avila and IXDP share the same source for now. Will change in future - # ---- linux-2.6.14.orig/arch/arm/mach-ixp4xx/Makefile 2005-11-09 00:58:58.000000000 +0100 -+++ linux-2.6.14/arch/arm/mach-ixp4xx/Makefile 2005-11-11 22:23:08.000000000 +0100 -@@ -8,4 +8,5 @@ obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pc - obj-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o coyote-setup.o - obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o coyote-setup.o - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o -+obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o - ---- linux-2.6.14.orig/include/asm-arm/arch-ixp4xx/hardware.h 2005-11-09 00:59:41.000000000 +0100 -+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/hardware.h 2005-11-11 22:23:08.000000000 +0100 -@@ -44,5 +44,6 @@ extern unsigned int processor_id; - #include "ixdp425.h" - #include "coyote.h" - #include "prpmc1100.h" -+#include "nas100d.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ ---- linux-2.6.14.orig/include/asm-arm/arch-ixp4xx/irqs.h 2005-11-09 00:59:41.000000000 +0100 -+++ linux-2.6.14/include/asm-arm/arch-ixp4xx/irqs.h 2005-11-11 23:01:50.000000000 +0100 -@@ -93,4 +93,13 @@ - #define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 - #define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -+/* -+ * NAS100D board IRQs -+ */ -+#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9 -+#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 -+#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 -+ - #endif ---- linux-2.6.14.orig/arch/arm/tools/mach-types 2005-11-09 00:58:59.000000000 +0100 -+++ linux-2.6.14/arch/arm/tools/mach-types 2005-11-11 22:23:08.000000000 +0100 -@@ -869,3 +869,4 @@ davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_ - htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 - tpad MACH_TPAD TPAD 856 - roverp3 MACH_ROVERP3 ROVERP3 857 -+nas100d MACH_NAS100D NAS100D 865 diff --git a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch b/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch deleted file mode 100644 index 5e180093a4..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-i2c.patch +++ /dev/null @@ -1,649 +0,0 @@ - drivers/i2c/busses/i2c-ixp4xx.c | 9 - drivers/i2c/chips/Kconfig | 9 - drivers/i2c/chips/Makefile | 1 - drivers/i2c/chips/pcf8563.c | 547 ++++++++++++++++++++++++++++++++++++++++ - include/linux/pcf8563.h | 24 + - 5 files changed, 587 insertions(+), 3 deletions(-) - ---- linux-nas100d.orig/drivers/i2c/busses/i2c-ixp4xx.c 2005-11-11 22:22:43.000000000 +0100 -+++ linux-nas100d/drivers/i2c/busses/i2c-ixp4xx.c 2005-11-15 22:06:23.000000000 +0100 -@@ -65,7 +65,6 @@ static int ixp4xx_bit_getscl(void *data) - - gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_IN ); - gpio_line_get(ixp4xx_scl_pin(data), &scl); -- - return scl; - } - -@@ -75,7 +74,6 @@ static int ixp4xx_bit_getsda(void *data) - - gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_IN ); - gpio_line_get(ixp4xx_sda_pin(data), &sda); -- - return sda; - } - -@@ -127,7 +125,10 @@ static int ixp4xx_i2c_probe(struct devic - drv_data->algo_data.udelay = 10; - drv_data->algo_data.mdelay = 10; - drv_data->algo_data.timeout = 100; -- -+#ifdef CONFIG_MACH_NAS100D -+ drv_data->algo_data.udelay = 100; -+ drv_data->algo_data.mdelay = 100; -+#endif - drv_data->adapter.id = I2C_HW_B_IXP4XX; - drv_data->adapter.algo_data = &drv_data->algo_data; - -@@ -145,6 +146,8 @@ static int ixp4xx_i2c_probe(struct devic - return err; - } - -+ printk(KERN_INFO "i2c: ixp4xx 0.0.4\n"); -+ - dev_set_drvdata(&plat_dev->dev, drv_data); - - return 0; ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-nas100d/drivers/i2c/chips/pcf8563.c 2005-11-16 11:34:15.000000000 +0100 -@@ -0,0 +1,547 @@ -+/* -+ * pcf8563.c - An i2c driver for the Philips PCF8563 RTC -+ * Copyright 2005 Alessandro Zummo -+ * -+ * please send all reports to: -+ * a dot zummo at towertech dot it -+ * -+ * based on the other drivers in this same directory. -+ * -+ * http://www.semiconductors.philips.com/acrobat/datasheets/PCF8563-04.pdf -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/i2c.h> -+#include <linux/string.h> -+#include <linux/bcd.h> -+#include <linux/rtc.h> -+#include <linux/list.h> -+ -+#include <linux/pcf8563.h> -+ -+#define DRV_VERSION "0.3.1" -+ -+/* Addresses to scan */ -+static unsigned short normal_i2c[] = { 0x51, I2C_CLIENT_END }; -+ -+/* Module parameters */ -+I2C_CLIENT_INSMOD; -+I2C_CLIENT_MODULE_PARM(hctosys, -+ "Set the system time from the hardware clock upon initialization"); -+ -+#define PCF8563_REG_ST1 0x00 /* status */ -+#define PCF8563_REG_ST2 0x01 -+ -+#define PCF8563_REG_SC 0x02 /* datetime */ -+#define PCF8563_REG_MN 0x03 -+#define PCF8563_REG_HR 0x04 -+#define PCF8563_REG_DM 0x05 -+#define PCF8563_REG_DW 0x06 -+#define PCF8563_REG_MO 0x07 -+#define PCF8563_REG_YR 0x08 -+ -+#define PCF8563_REG_AMN 0x09 /* alarm */ -+#define PCF8563_REG_AHR 0x0A -+#define PCF8563_REG_ADM 0x0B -+#define PCF8563_REG_ADW 0x0C -+ -+#define PCF8563_REG_CLKO 0x0D /* clock out */ -+#define PCF8563_REG_TMRC 0x0E /* timer control */ -+#define PCF8563_REG_TMR 0x0F /* timer */ -+ -+#define PCF8563_SC_LV 0x80 /* low voltage */ -+ -+/* Prototypes */ -+static int pcf8563_attach(struct i2c_adapter *adapter); -+static int pcf8563_detach(struct i2c_client *client); -+static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind); -+static int pcf8563_command(struct i2c_client *client, unsigned int cmd, -+ void *arg); -+ -+static struct i2c_driver pcf8563_driver = { -+ .owner = THIS_MODULE, -+ .name = "pcf8563", -+ .flags = I2C_DF_NOTIFY, -+ .attach_adapter = &pcf8563_attach, -+ .detach_client = &pcf8563_detach, -+}; -+ -+struct pcf8563_data { -+ struct i2c_client client; -+ struct list_head list; -+}; -+ -+static const unsigned char days_in_mo[] = -+ { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; -+ -+static LIST_HEAD(pcf8563_clients); -+ -+/* Workaround until the I2C subsytem will allow to send -+ * commands to a specific client. This function will send the command -+ * to the first client. -+ */ -+int pcf8563_do_command(unsigned int cmd, void *arg) -+{ -+ struct list_head *walk; -+ struct list_head *tmp; -+ struct pcf8563_data *data; -+ -+ list_for_each_safe(walk, tmp, &pcf8563_clients) { -+ data = list_entry(walk, struct pcf8563_data, list); -+ return pcf8563_command(&data->client, cmd, arg); -+ } -+ -+ return -ENODEV; -+} -+ -+#define is_leap(year) \ -+ ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) -+ -+/* make sure the rtc_time values are in bounds */ -+ -+static int pcf8563_validate_tm(struct rtc_time *tm) -+{ -+ int year = tm->tm_year + 1900; -+ -+ if ((tm->tm_year < 70) || (tm->tm_year > 255)) -+ return -EINVAL; -+ -+ if ((tm->tm_mon > 11) || (tm->tm_mday == 0)) -+ return -EINVAL; -+ -+ if (tm->tm_mday > days_in_mo[tm->tm_mon] -+ + ((tm->tm_mon == 1) && is_leap(year))) -+ return -EINVAL; -+ -+ if ((tm->tm_hour >= 24) || (tm->tm_min >= 60) || (tm->tm_sec >= 60)) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+/* -+ * In the routines that deal directly with the pcf8563 hardware, we use -+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch. -+ */ -+static int pcf8563_get_datetime(struct i2c_client *client, struct rtc_time *tm) -+{ -+ unsigned char buf[13]; -+ unsigned char addr = PCF8563_REG_ST1; -+ -+ struct i2c_msg msgs[] = { -+ { client->addr, 0, 1, &addr }, /* setup read ptr */ -+ { client->addr, I2C_M_RD, 13, buf }, /* read status + date */ -+ }; -+ -+ /* read registers */ -+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { -+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__); -+ return -EIO; -+ } -+ -+ if (buf[PCF8563_REG_SC] & PCF8563_SC_LV) -+ dev_info(&client->dev, -+ "low voltage detected, date/time is not reliable.\n"); -+ -+ dev_dbg(&client->dev, -+ "%s: raw read data - st1=%02x, st2=%02x, sec=%02x, min=%02x, hr=%02x, " -+ "mday=%02x, wday=%02x, mon=%02x, year=%02x\n", -+ __FUNCTION__, -+ buf[0], buf[1], buf[2], buf[3], -+ buf[4], buf[5], buf[6], buf[7], -+ buf[8]); -+ -+ -+ tm->tm_sec = BCD2BIN(buf[PCF8563_REG_SC] & 0x7F); -+ tm->tm_min = BCD2BIN(buf[PCF8563_REG_MN] & 0x7F); -+ tm->tm_hour = BCD2BIN(buf[PCF8563_REG_HR] & 0x3F); /* rtc hr 0-23 */ -+ tm->tm_mday = BCD2BIN(buf[PCF8563_REG_DM] & 0x3F); -+ tm->tm_wday = buf[PCF8563_REG_DW] & 0x07; -+ tm->tm_mon = BCD2BIN(buf[PCF8563_REG_MO] & 0x1F) - 1; /* rtc mn 1-12 */ -+ tm->tm_year = BCD2BIN(buf[PCF8563_REG_YR]) -+ + (buf[PCF8563_REG_MO] & 0x80 ? 100 : 0); -+ -+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, " -+ "mday=%d, mon=%d, year=%d, wday=%d\n", -+ __FUNCTION__, -+ tm->tm_sec, tm->tm_min, tm->tm_hour, -+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); -+ -+ if (pcf8563_validate_tm(tm) < 0) { -+ dev_err(&client->dev, "retrieved date/time is not valid.\n"); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+#if 0 -+static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm, -+ int datetoo, u8 reg_base) -+{ -+ int i, err, xfer; -+ -+ unsigned char buf[8]; -+ -+ static const unsigned char wel[3] = { 0, PCF8563_REG_SR, -+ PCF8563_SR_WEL }; -+ -+ static const unsigned char rwel[3] = { 0, PCF8563_REG_SR, -+ PCF8563_SR_WEL | PCF8563_SR_RWEL }; -+ -+ static const unsigned char diswe[3] = { 0, PCF8563_REG_SR, 0 }; -+ -+ struct pcf8563_data *data = i2c_get_clientdata(client); -+ -+ /* check if all values in the tm struct are correct */ -+ if ((err = pcf8563_validate_tm(tm)) < 0) -+ return err; -+ -+ dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, " -+ "mday=%d, mon=%d, year=%d, wday=%d\n", -+ __FUNCTION__, -+ tm->tm_sec, tm->tm_min, tm->tm_hour, -+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); -+ -+ buf[PCF8563_REG_SEC] = BIN2BCD(tm->tm_sec); -+ buf[PCF8563_REG_MIN] = BIN2BCD(tm->tm_min); -+ -+ /* set hour and 24hr bit */ -+ buf[PCF8563_REG_HOUR] = BIN2BCD(tm->tm_hour) | PCF8563_HR_MIL; -+ -+ /* should we also set the date? */ -+ if (datetoo) { -+ buf[PCF8563_REG_MDAY] = BIN2BCD(tm->tm_mday); -+ -+ /* month, 0 - 11 */ -+ buf[PCF8563_REG_MONTH] = BIN2BCD(tm->tm_mon); -+ -+ /* year, since 1900 */ -+ buf[PCF8563_REG_YEAR] = BIN2BCD(tm->tm_year + 1900 - data->epoch); -+ buf[PCF8563_REG_WDAY] = tm->tm_wday & 0x07; -+ buf[PCF8563_REG_Y2K] = BIN2BCD(data->epoch / 100); -+ } -+ -+ /* this sequence is required to unlock the chip */ -+ xfer = i2c_master_send(client, wel, 3); -+ if (xfer != 3) { -+ dev_err(&client->dev, "%s: wel - %d\n", __FUNCTION__, xfer); -+ return -EIO; -+ } -+ -+ xfer = i2c_master_send(client, rwel, 3); -+ if (xfer != 3) { -+ dev_err(&client->dev, "%s: rwel - %d\n", __FUNCTION__, xfer); -+ return -EIO; -+ } -+ -+ /* write register's data */ -+ for (i = 0; i < (datetoo ? 8 : 3); i++) { -+ unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; -+ -+ xfer = i2c_master_send(client, rdata, 3); -+ if (xfer != 3) { -+ dev_err(&client->dev, -+ "%s: xfer=%d addr=%02x, data=%02x\n", -+ __FUNCTION__, -+ xfer, rdata[1], rdata[2]); -+ return -EIO; -+ } -+ }; -+ -+ /* disable further writes */ -+ xfer = i2c_master_send(client, diswe, 3); -+ if (xfer != 3) { -+ dev_err(&client->dev, "%s: diswe - %d\n", __FUNCTION__, xfer); -+ return -EIO; -+ } -+ -+ return 0; -+} -+#endif -+ -+static int pcf8563_hctosys(struct i2c_client *client) -+{ -+ int err; -+ -+ struct rtc_time tm; -+ struct timespec tv; -+ -+ err = pcf8563_command(client, PCF8563_CMD_GETDATETIME, &tm); -+ -+ if (err) { -+ dev_err(&client->dev, -+ "Unable to set the system clock\n"); -+ return err; -+ } -+ -+ /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary -+ * whether it stores the most close value or the value with partial -+ * seconds truncated. However, it is important that we use it to store -+ * the truncated value. This is because otherwise it is necessary, -+ * in an rtc sync function, to read both xtime.tv_sec and -+ * xtime.tv_nsec. On some processors (i.e. ARM), an atomic read -+ * of >32bits is not possible. So storing the most close value would -+ * slow down the sync API. So here we have the truncated value and -+ * the best guess is to add 0.5s. -+ */ -+ -+ tv.tv_nsec = NSEC_PER_SEC >> 1; -+ -+ /* WARNING: this is not the C library 'mktime' call, it is a built in -+ * inline function from include/linux/time.h. It expects (requires) -+ * the month to be in the range 1-12 -+ */ -+ -+ tv.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, -+ tm.tm_mday, tm.tm_hour, -+ tm.tm_min, tm.tm_sec); -+ -+ do_settimeofday(&tv); -+ -+ dev_info(&client->dev, -+ "setting the system clock to %d-%d-%d %d:%d:%d\n", -+ tm.tm_year + 1900, tm.tm_mon + 1, -+ tm.tm_mday, tm.tm_hour, tm.tm_min, -+ tm.tm_sec); -+ -+ return 0; -+} -+#if 0 -+struct pcf8563_limit -+{ -+ unsigned char reg; -+ unsigned char mask; -+ unsigned char min; -+ unsigned char max; -+}; -+ -+static int pcf8563_validate_client(struct i2c_client *client) -+{ -+ int i, xfer; -+ -+ /* Probe array. We will read the register at the specified -+ * address and check if the given bits are zero. -+ */ -+ static const unsigned char probe_zero_pattern[] = { -+ /* register, mask */ -+ PCF8563_REG_SR, 0x18, -+ PCF8563_REG_DTR, 0xF8, -+ PCF8563_REG_ATR, 0xC0, -+ PCF8563_REG_INT, 0x18, -+ PCF8563_REG_0, 0xFF, -+ }; -+ -+ static const struct pcf8563_limit probe_limits_pattern[] = { -+ /* register, mask, min, max */ -+ { PCF8563_REG_Y2K, 0xFF, 19, 20 }, -+ { PCF8563_REG_DW, 0xFF, 0, 6 }, -+ { PCF8563_REG_YR, 0xFF, 0, 99 }, -+ { PCF8563_REG_MO, 0xFF, 0, 12 }, -+ { PCF8563_REG_DT, 0xFF, 0, 31 }, -+ { PCF8563_REG_HR, 0x7F, 0, 23 }, -+ { PCF8563_REG_MN, 0xFF, 0, 59 }, -+ { PCF8563_REG_SC, 0xFF, 0, 59 }, -+ { PCF8563_REG_Y2K1, 0xFF, 19, 20 }, -+ { PCF8563_REG_Y2K0, 0xFF, 19, 20 }, -+ }; -+ -+ /* check that registers have bits at 0 where expected */ -+ for (i = 0; i < ARRAY_SIZE(probe_zero_pattern); i += 2) { -+ unsigned char buf; -+ -+ struct i2c_msg msgs[2] = { -+ { client->addr, 0, 1, &probe_zero_pattern[i] }, -+ { client->addr, I2C_M_RD, 1, &buf }, -+ }; -+ -+ xfer = i2c_transfer(client->adapter, msgs, 2); -+ if (xfer != 2) { -+ dev_err(&client->adapter->dev, -+ "%s: could not read register %x\n", -+ __FUNCTION__, probe_zero_pattern[i]); -+ -+ return -EIO; -+ } -+ -+ if ((buf & probe_zero_pattern[i+1]) != 0) { -+ dev_err(&client->adapter->dev, -+ "%s: register=%02x, zero pattern=%d, value=%x\n", -+ __FUNCTION__, probe_zero_pattern[i], i, buf); -+ -+ return -ENODEV; -+ } -+ } -+ -+ /* check limits (only registers with bcd values) */ -+ for (i = 0; i < ARRAY_SIZE(probe_limits_pattern); i++) { -+ unsigned char reg, value; -+ -+ struct i2c_msg msgs[2] = { -+ { client->addr, 0, 2, &probe_limits_pattern[i].reg}, -+ { client->addr, I2C_M_RD, 1, ® }, -+ }; -+ -+ xfer = i2c_transfer(client->adapter, msgs, 2); -+ -+ if (xfer != 2) { -+ dev_err(&client->adapter->dev, -+ "%s: could not read register %x\n", -+ __FUNCTION__, probe_limits_pattern[i].reg); -+ -+ return -EIO; -+ } -+ -+ value = BCD2BIN(reg & probe_limits_pattern[i].mask); -+ -+ if (value > probe_limits_pattern[i].max || -+ value < probe_limits_pattern[i].min) { -+ dev_dbg(&client->adapter->dev, -+ "%s: register=%x, lim pattern=%d, value=%d\n", -+ __FUNCTION__, probe_limits_pattern[i].reg, i, value); -+ -+ return -ENODEV; -+ } -+ } -+ -+ return 0; -+} -+#endif -+static int pcf8563_attach(struct i2c_adapter *adapter) -+{ -+ return i2c_probe(adapter, &addr_data, pcf8563_probe); -+} -+ -+static int pcf8563_probe(struct i2c_adapter *adapter, int address, int kind) -+{ -+ struct i2c_client *client; -+ struct pcf8563_data *data; -+ -+ int err = 0; -+ -+ dev_dbg(&adapter->dev, "%s\n", __FUNCTION__); -+ -+ if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { -+ err = -ENODEV; -+ goto exit; -+ } -+ -+ if (!(data = kzalloc(sizeof(struct pcf8563_data), GFP_KERNEL))) { -+ err = -ENOMEM; -+ goto exit; -+ } -+ -+ client = &data->client; -+ client->addr = address; -+ client->driver = &pcf8563_driver; -+ client->adapter = adapter; -+ -+ strlcpy(client->name, "pcf8563", I2C_NAME_SIZE); -+ -+ i2c_set_clientdata(client, data); -+ -+ /* Verify the chip is really an PCF8563 */ -+ if (kind < 0) { -+/* if (pcf8563_validate_client(client) < 0) { -+ err = -ENODEV; -+ goto exit_kfree; -+ } -+*/ } -+ -+ /* Inform the i2c layer */ -+ if ((err = i2c_attach_client(client))) -+ goto exit_kfree; -+ -+ list_add(&data->list, &pcf8563_clients); -+ -+ dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n"); -+ -+ /* If requested, set the system time */ -+ if (hctosys) -+ pcf8563_hctosys(client); -+ -+ return 0; -+ -+exit_kfree: -+ kfree(data); -+ -+exit: -+ return err; -+} -+ -+static int pcf8563_detach(struct i2c_client *client) -+{ -+ int err; -+ struct pcf8563_data *data = i2c_get_clientdata(client); -+ -+ if ((err = i2c_detach_client(client))) -+ return err; -+ -+ list_del(&data->list); -+ -+ kfree(data); -+ -+ return 0; -+} -+ -+static int pcf8563_command(struct i2c_client *client, unsigned int cmd, -+ void *param) -+{ -+ if (param == NULL) -+ return -EINVAL; -+ -+ if (!capable(CAP_SYS_TIME)) -+ return -EACCES; -+ -+ dev_dbg(&client->dev, "%s: cmd=%d\n", __FUNCTION__, cmd); -+ -+ switch (cmd) { -+ case PCF8563_CMD_GETDATETIME: -+ return pcf8563_get_datetime(client, param); -+/* -+ case PCF8563_CMD_SETTIME: -+ return pcf8563_set_datetime(client, param, 0, -+ PCF8563_CCR_BASE); -+ -+ case PCF8563_CMD_SETDATETIME: -+ return pcf8563_set_datetime(client, param, 1, -+ PCF8563_CCR_BASE); -+ -+ case PCF8563_CMD_GETALARM: -+ return pcf8563_get_datetime(client, param, PCF8563_ALM0_BASE); -+ -+ case PCF8563_CMD_SETALARM: -+ return pcf8563_set_datetime(client, param, 1, -+ PCF8563_ALM0_BASE); -+*/ -+ default: -+ return -EINVAL; -+ } -+} -+ -+static int __init pcf8563_init(void) -+{ -+ return i2c_add_driver(&pcf8563_driver); -+} -+ -+static void __exit pcf8563_exit(void) -+{ -+ i2c_del_driver(&pcf8563_driver); -+} -+ -+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -+MODULE_DESCRIPTION("Philips PCF8563 RTC driver"); -+MODULE_LICENSE("GPL"); -+MODULE_VERSION(DRV_VERSION); -+ -+EXPORT_SYMBOL_GPL(pcf8563_do_command); -+ -+module_init(pcf8563_init); -+module_exit(pcf8563_exit); ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-nas100d/include/linux/pcf8563.h 2005-11-15 20:55:54.000000000 +0100 -@@ -0,0 +1,24 @@ -+/* -+ * pcf8563.h - defines for drivers/i2c/chips/pcf8563.c -+ * Copyright 2005 Alessandro Zummo -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef __LINUX_PCF8563_H__ -+#define __LINUX_PCF8563_H__ -+ -+/* commands */ -+ -+#define PCF8563_CMD_GETDATETIME 0 -+#define PCF8563_CMD_SETTIME 1 -+#define PCF8563_CMD_SETDATETIME 2 -+#define PCF8563_CMD_GETALARM 3 -+#define PCF8563_CMD_SETALARM 4 -+ -+extern int pcf8563_do_command(unsigned int cmd, void *arg); -+ -+#endif /* __LINUX_PCF8563_H__ */ ---- linux-nas100d.orig/drivers/i2c/chips/Kconfig 2005-11-11 22:22:43.000000000 +0100 -+++ linux-nas100d/drivers/i2c/chips/Kconfig 2005-11-15 22:37:25.000000000 +0100 -@@ -126,4 +126,13 @@ config SENSORS_MAX6875 - This driver can also be built as a module. If so, the module - will be called max6875. - -+config RTC_PCF8563_I2C -+ tristate "Philips PCF8563 RTC" -+ depends on I2C && EXPERIMENTAL -+ help -+ If you say yes here you get support for the Philips PCF8563 -+ Real Time Clock chip. This chip is used by the Iomega NAS100D. -+ -+ This driver can also be built as a module. If so, the module -+ will be called pcf8563. - endmenu ---- linux-nas100d.orig/drivers/i2c/chips/Makefile 2005-11-11 22:22:43.000000000 +0100 -+++ linux-nas100d/drivers/i2c/chips/Makefile 2005-11-15 21:11:26.000000000 +0100 -@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8591) += pcf8591 - obj-$(CONFIG_SENSORS_RTC8564) += rtc8564.o - obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o - obj-$(CONFIG_TPS65010) += tps65010.o -+obj-$(CONFIG_RTC_PCF8563_I2C) += pcf8563.o - - ifeq ($(CONFIG_I2C_DEBUG_CHIP),y) - EXTRA_CFLAGS += -DDEBUG diff --git a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch b/packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch deleted file mode 100644 index 9f5d164356..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/60-nas100d-ide.patch +++ /dev/null @@ -1,143 +0,0 @@ - drivers/ide/pci/aec62xx.c | 51 +++++++++++++++++++++++++++++++++++++++++++--- - drivers/ide/setup-pci.c | 12 +++++++++- - 2 files changed, 59 insertions(+), 4 deletions(-) - ---- linux-nas100d.orig/drivers/ide/pci/aec62xx.c 2005-11-12 15:38:03.000000000 +0100 -+++ linux-nas100d/drivers/ide/pci/aec62xx.c 2005-11-13 01:45:26.000000000 +0100 -@@ -145,6 +145,15 @@ static int aec6210_tune_chipset (ide_dri - unsigned long flags; - - local_irq_save(flags); -+ -+#ifdef CONFIG_MACH_NAS100D -+ printk(KERN_INFO "aec62xx: nas100d tuning\n"); -+ pci_write_config_byte(hwif->pci_dev, PCI_LATENCY_TIMER, 0x90); -+ /* Enable burst mode & force 2 ports enable */ -+ pci_read_config_byte(hwif->pci_dev, 0x4a, &tmp0); -+ pci_write_config_byte(hwif->pci_dev, 0x4a, tmp0 | 0x80); -+#endif -+ - /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */ - pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf); - tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev)); -@@ -263,7 +272,7 @@ static int aec62xx_irq_timeout (ide_driv - case PCI_DEVICE_ID_ARTOP_ATP865: - case PCI_DEVICE_ID_ARTOP_ATP865R: - printk(" AEC62XX time out "); --#if 0 -+#ifdef CONFIG_MACH_NAS100D - { - int i = 0; - u8 reg49h = 0; -@@ -277,7 +286,7 @@ static int aec62xx_irq_timeout (ide_driv - default: - break; - } --#if 0 -+#ifdef CONFIG_MACH_NAS100D - { - ide_hwif_t *hwif = HWIF(drive); - struct pci_dev *dev = hwif->pci_dev; -@@ -299,6 +308,14 @@ static unsigned int __devinit init_chips - { - int bus_speed = system_bus_clock(); - -+#ifdef CONFIG_MACH_NAS100D -+ /* enable both ports */ -+ byte tmp; -+ printk(KERN_INFO "%s: nas100d ports enable\n", name); -+ pci_read_config_byte(dev, 0x4a, &tmp); -+ pci_write_config_byte(dev, 0x4a, tmp | 0x06); -+#endif -+ - if (dev->resource[PCI_ROM_RESOURCE].start) { - pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE); - printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name, dev->resource[PCI_ROM_RESOURCE].start); -@@ -312,12 +329,35 @@ static unsigned int __devinit init_chips - return dev->irq; - } - -+#ifdef CONFIG_MACH_NAS100D -+static void nas100d_insw (unsigned long port, u16 *addr, u32 count) -+{ -+ while (count--) -+ *addr++ = __cpu_to_le16(inw(port)); -+} -+ -+static void nas100d_outw (u16 val, unsigned long port) -+{ -+ u32 n, byte_enables, data; -+ n = port % 4; -+ byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; -+ data = val << (8*n); -+ ixp4xx_pci_write(port, byte_enables | NP_CMD_IOWRITE, __le16_to_cpu(data)); -+} -+#endif -+ - static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) - { - hwif->autodma = 0; - hwif->tuneproc = &aec62xx_tune_drive; - hwif->speedproc = &aec62xx_tune_chipset; - -+#ifdef CONFIG_MACH_NAS100D -+ printk(KERN_INFO "aec62xx: enabling nas100d iops\n"); -+ hwif->OUTW = nas100d_outw; -+ hwif->INSW = nas100d_insw; -+#endif -+ - if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) { - hwif->serialized = hwif->channel; - hwif->no_dsc = 1; -@@ -360,7 +400,7 @@ static void __devinit init_dma_aec62xx(i - } else { - u8 ata66 = 0; - pci_read_config_byte(hwif->pci_dev, 0x49, &ata66); -- if (!(hwif->udma_four)) -+ if (!(hwif->udma_four)) - hwif->udma_four = (ata66&(hwif->channel?0x02:0x01))?0:1; - } - -@@ -427,6 +467,9 @@ static ide_pci_device_t aec62xx_chipsets - .init_dma = init_dma_aec62xx, - .channels = 2, - .autodma = AUTODMA, -+#ifdef CONFIG_MACH_NAS100D -+ .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}}, -+#endif - .bootable = OFF_BOARD, - },{ /* 4 */ - .name = "AEC6X80R", -@@ -454,6 +497,8 @@ static int __devinit aec62xx_init_one(st - { - ide_pci_device_t *d = &aec62xx_chipsets[id->driver_data]; - -+ printk(KERN_INFO "aec62xx: using config %lx\n", id->driver_data); -+ - return d->init_setup(dev, d); - } - ---- linux-nas100d.orig/drivers/ide/setup-pci.c 2005-11-12 15:38:03.000000000 +0100 -+++ linux-nas100d/drivers/ide/setup-pci.c 2005-11-13 01:36:30.000000000 +0100 -@@ -602,10 +602,20 @@ void ide_pci_setup_ports(struct pci_dev - if ((d->flags & IDEPCI_FLAG_FORCE_PDC) && - (secondpdc++==1) && (port==1)) - goto controller_ok; -- -+ - if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) || - (tmp & e->mask) != e->val)) -+#ifdef CONFIG_MACH_NAS100D -+ { -+ pci_write_config_byte(dev, e->reg, tmp & ~0x01); -+#endif - continue; /* port not enabled */ -+#ifdef CONFIG_MACH_NAS100D -+ } -+ else -+ pci_write_config_byte(dev, e->reg, tmp & ~0x01); -+#endif -+ - controller_ok: - - if (d->channels <= port) diff --git a/packages/linux/nas100d-kernel/2.6.14/90-ixp4xx-pci-le.patch b/packages/linux/nas100d-kernel/2.6.14/90-ixp4xx-pci-le.patch deleted file mode 100644 index 1a37b13a79..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/90-ixp4xx-pci-le.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- linux-2.6.13/.pc/90-ixp4xx-pci-le.patch/arch/arm/mach-ixp4xx/common-pci.c 2005-08-28 16:41:01.000000000 -0700 -+++ linux-2.6.13/arch/arm/mach-ixp4xx/common-pci.c 2005-10-26 15:24:30.337542292 -0700 -@@ -427,7 +427,7 @@ void __init ixp4xx_pci_preinit(void) - #ifdef __ARMEB__ - *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; - #else -- *PCI_CSR = PCI_CSR_IC; -+ *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; - #endif - - pr_debug("DONE\n"); diff --git a/packages/linux/nas100d-kernel/2.6.14/defconfig b/packages/linux/nas100d-kernel/2.6.14/defconfig deleted file mode 100644 index 939a5d437e..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/defconfig +++ /dev/null @@ -1,1609 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14 -# Sun Nov 13 02:06:49 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -CONFIG_ARCH_IXP4XX=y -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y - -# -# Intel IXP4xx Implementation Options -# - -# -# IXP4xx Platforms -# -# CONFIG_ARCH_AVILA is not set -# CONFIG_ARCH_ADI_COYOTE is not set -# CONFIG_ARCH_IXDP425 is not set -# CONFIG_MACH_IXDPG425 is not set -# CONFIG_MACH_IXDP465 is not set -# CONFIG_ARCH_PRPMC1100 is not set -CONFIG_MACH_NAS100D=y -# CONFIG_MACH_GTWX5715 is not set - -# -# IXP4xx Options -# -CONFIG_IXP4XX_INDIRECT_PCI=y - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_XSCALE=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_XSCALE_PMU=y -CONFIG_DMABOUNCE=y - -# -# Bus support -# -CONFIG_ISA_DMA_API=y -CONFIG_PCI=y -CONFIG_PCI_LEGACY_PROC=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/mtdblock3 rw rootfstype=jffs2 mem=64M@0x00000000 init=/linuxrc noirqdebug console=ttyS0,115200n8" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_INET6_TUNNEL=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y -# CONFIG_NETFILTER_NETLINK is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_PHYSDEV=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -# CONFIG_IP_NF_MATCH_STRING is not set -CONFIG_IP_NF_FILTER=m -# CONFIG_IP_NF_TARGET_REJECT is not set -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_DSCP=m -CONFIG_IP_NF_TARGET_MARK=m -CONFIG_IP_NF_TARGET_CLASSIFY=m -# CONFIG_IP_NF_TARGET_TTL is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -# CONFIG_DECNET is not set -CONFIG_LLC=m -# CONFIG_LLC2 is not set -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -CONFIG_NET_PKTGEN=m -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -# CONFIG_BT_HIDP is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIUART is not set -CONFIG_BT_HCIBCM203X=m -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -CONFIG_MTD_IXP4XX=y -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=4 -CONFIG_BLK_DEV_RAM_SIZE=10240 -CONFIG_BLK_DEV_INITRD=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=m -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=m -CONFIG_MD_LINEAR=m -CONFIG_MD_RAID0=m -CONFIG_MD_RAID1=m -CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID6=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_CRYPT is not set -# CONFIG_DM_SNAPSHOT is not set -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_AIRO is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support -# -# CONFIG_PRISM54 is not set -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -CONFIG_NETCONSOLE=m -CONFIG_NETPOLL=y -# CONFIG_NETPOLL_RX is not set -# CONFIG_NETPOLL_TRAP is not set -CONFIG_NET_POLL_CONTROLLER=y - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=m - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=16 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_IXP4XX_WATCHDOG=y - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_RTC=m -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_IOP3XX is not set -CONFIG_I2C_IXP4XX=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=n -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_I2C_DEBUG_CORE=n -CONFIG_I2C_DEBUG_ALGO=n -CONFIG_I2C_DEBUG_BUS=n -CONFIG_I2C_DEBUG_CHIP=y -CONFIG_RTC_PCF8563_I2C=m - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# - -# -# Video Adapters -# -CONFIG_VIDEO_BT848=m -# CONFIG_VIDEO_SAA6588 is not set -CONFIG_VIDEO_CPIA=m -CONFIG_VIDEO_CPIA_USB=m -CONFIG_VIDEO_SAA5246A=m -CONFIG_VIDEO_SAA5249=m -CONFIG_TUNER_3036=m -CONFIG_VIDEO_STRADIS=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DPC=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_OVCAMCHIP=m - -# -# Radio Adapters -# -# CONFIG_RADIO_GEMTEK_PCI is not set -# CONFIG_RADIO_MAXIRADIO is not set -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_VIDEO_VIDEOBUF=m -CONFIG_VIDEO_TUNER=m -CONFIG_VIDEO_BUF=m -CONFIG_VIDEO_BTCX=m -CONFIG_VIDEO_IR=m -CONFIG_VIDEO_TVEEPROM=m - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_RTCTIMER is not set -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_HDA_INTEL is not set - -# -# ALSA ARM devices -# - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set - -# -# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set -# CONFIG_USB_VICAM is not set -# CONFIG_USB_DSBR is not set -# CONFIG_USB_IBMCAM is not set -# CONFIG_USB_KONICAWC is not set -# CONFIG_USB_OV511 is not set -# CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set -# CONFIG_USB_STV680 is not set -# CONFIG_USB_W9968CF is not set -CONFIG_USB_PWC=m - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -# CONFIG_USB_SERIAL_CP2101 is not set -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -# CONFIG_USB_SERIAL_KEYSPAN is not set -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -# CONFIG_USB_SERIAL_HP4X is not set -CONFIG_USB_SERIAL_SAFE=m -# CONFIG_USB_SERIAL_SAFE_PADDED is not set -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="utf8" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_LOCKD=m -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y diff --git a/packages/linux/nas100d-kernel/2.6.14/nas100d-pci.c b/packages/linux/nas100d-kernel/2.6.14/nas100d-pci.c deleted file mode 100644 index 1f934068e9..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/nas100d-pci.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nas100d-pci.c - * - * NAS 100d board-level PCI initialization - * - * based on ixdp425-pci.c: - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Maintainer: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/config.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -void __init nas100d_pci_preinit(void) -{ - set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); - - gpio_line_isr_clear(NAS100D_PCI_INTA_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTB_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTC_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTD_PIN); - gpio_line_isr_clear(NAS100D_PCI_INTE_PIN); - - ixp4xx_pci_preinit(); -} - -static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - if (slot < 1 || slot > 3 || pin < 1 || pin > 3) - return -1; - - switch (slot) - { - case 1: - if (pin == 1) - return IRQ_NAS100D_PCI_INTA; - break; - case 2: - if (pin == 1) - return IRQ_NAS100D_PCI_INTB; - break; - case 3: - if (pin == 1) - return IRQ_NAS100D_PCI_INTC; - if (pin == 2) - return IRQ_NAS100D_PCI_INTD; - if (pin == 3) - return IRQ_NAS100D_PCI_INTE; - break; - } - - return -1; -} - -struct hw_pci __initdata nas100d_pci = { - .nr_controllers = 1, - .preinit = nas100d_pci_preinit, - .swizzle = pci_std_swizzle, - .setup = ixp4xx_setup, - .scan = ixp4xx_scan_bus, - .map_irq = nas100d_map_irq, -}; - -int __init nas100d_pci_init(void) -{ - if (machine_is_nas100d()) - pci_common_init(&nas100d_pci); - - return 0; -} - -subsys_initcall(nas100d_pci_init); diff --git a/packages/linux/nas100d-kernel/2.6.14/nas100d-power.c b/packages/linux/nas100d-kernel/2.6.14/nas100d-power.c deleted file mode 100644 index 94ce5d1b46..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/nas100d-power.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nas100d-power.c - * - * NAS 100d Power/Reset driver - * - * Copyright (C) 2005 Tower Technologies - * - * based on nas100d-io.c - * Copyright (C) 2004 Karen Spearel - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * Maintainers: http://www.nslu2-linux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/interrupt.h> - -#include <asm/mach-types.h> - -extern void ctrl_alt_del(void); - -static irqreturn_t nas100d_power_handler(int irq, void *dev_id, struct pt_regs *regs) -{ - /* Signal init to do the ctrlaltdel action, this will bypass init if - * it hasn't started and do a kernel_restart. - */ - ctrl_alt_del(); - - return IRQ_HANDLED; -} - -static irqreturn_t nas100d_reset_handler(int irq, void *dev_id, struct pt_regs *regs) -{ - /* This is the paper-clip reset, it shuts the machine down directly. - */ - machine_power_off(); - - return IRQ_HANDLED; -} - -static int __init nas100d_power_init(void) -{ - if (!(machine_is_nas100d())) - return 0; - - // *IXP4XX_GPIO_GPISR = 0x20400000; /* read the 2 irqs to clr */ - - set_irq_type(NAS100D_RB_IRQ, IRQT_LOW); -// set_irq_type(NAS100D_PB_IRQ, IRQT_HIGH); - - gpio_line_isr_clear(NAS100D_RB_GPIO); -// gpio_line_isr_clear(NAS100D_PB_GPIO); - - if (request_irq(NAS100D_RB_IRQ, &nas100d_reset_handler, - SA_INTERRUPT, "NAS100D reset button", NULL) < 0) { - - printk(KERN_DEBUG "Reset Button IRQ %d not available\n", - NAS100D_RB_IRQ); - - return -EIO; - } -/* - if (request_irq(NAS100D_PB_IRQ, &nas100d_power_handler, - SA_INTERRUPT, "NAS100D power button", NULL) < 0) { - - printk(KERN_DEBUG "Power Button IRQ %d not available\n", - NAS100D_PB_IRQ); - - return -EIO; - } -*/ - return 0; -} - -static void __exit nas100d_power_exit(void) -{ - free_irq(NAS100D_RB_IRQ, NULL); -// free_irq(NAS100D_PB_IRQ, NULL); -} - -module_init(nas100d_power_init); -module_exit(nas100d_power_exit); - -MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>"); -MODULE_DESCRIPTION("NAS100D Power/Reset driver"); -MODULE_LICENSE("GPL"); diff --git a/packages/linux/nas100d-kernel/2.6.14/nas100d-setup.c b/packages/linux/nas100d-kernel/2.6.14/nas100d-setup.c deleted file mode 100644 index 0dbb0b4e69..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/nas100d-setup.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/nas100d-setup.c - * - * NAS 100d board-setup - * - * based ixdp425-setup.c: - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * Author: Mark Rakes <mrakes at mac.com> - * Maintainers: http://www.nslu2-linux.org/ - * - */ - -#include <linux/kernel.h> -#include <linux/serial.h> -#include <linux/serial_8250.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -static struct flash_platform_data nas100d_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource nas100d_flash_resource = { - .start = NAS100D_FLASH_BASE, - .end = NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device nas100d_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev.platform_data = &nas100d_flash_data, - .num_resources = 1, - .resource = &nas100d_flash_resource, -}; - -static struct ixp4xx_i2c_pins nas100d_i2c_gpio_pins = { - .sda_pin = NAS100D_SDA_PIN, - .scl_pin = NAS100D_SCL_PIN, -}; - -static struct platform_device nas100d_i2c_controller = { - .name = "IXP4XX-I2C", - .id = 0, - .dev.platform_data = &nas100d_i2c_gpio_pins, - .num_resources = 0, -}; - -static struct resource nas100d_uart_resources[] = { - { - .start = IXP4XX_UART1_BASE_PHYS, - .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, - { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - } -}; - -static struct plat_serial8250_port nas100d_uart_data[] = { - { - .mapbase = IXP4XX_UART1_BASE_PHYS, - .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { } -}; - -static struct platform_device nas100d_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = nas100d_uart_data, - .num_resources = 2, - .resource = nas100d_uart_resources, -}; - -static struct platform_device *nas100d_devices[] __initdata = { - &nas100d_i2c_controller, - &nas100d_flash, - &nas100d_uart, -}; - -static void nas100d_power_off(void) -{ - /* This causes the box to drop the power and go dead. */ - - /* enable the pwr cntl gpio */ - gpio_line_config(NAS100D_PO_GPIO, IXP4XX_GPIO_OUT); - - /* do the deed */ - gpio_line_set(NAS100D_PO_GPIO, IXP4XX_GPIO_HIGH); -} - -static void __init nas100d_init(void) -{ - ixp4xx_sys_init(); - - pm_power_off = nas100d_power_off; - - platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices)); -} - -MACHINE_START(NAS100D, "Iomega NAS 100d") - /* Maintainer: www.nslu2-linux.org */ - .phys_ram = PHYS_OFFSET, - .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, - .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC, - .boot_params = 0x00000100, - .map_io = ixp4xx_map_io, - .init_irq = ixp4xx_init_irq, - .timer = &ixp4xx_timer, - .init_machine = nas100d_init, -MACHINE_END diff --git a/packages/linux/nas100d-kernel/2.6.14/nas100d.h b/packages/linux/nas100d-kernel/2.6.14/nas100d.h deleted file mode 100644 index 1623712b78..0000000000 --- a/packages/linux/nas100d-kernel/2.6.14/nas100d.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * include/asm-arm/arch-ixp4xx/nas100d.h - * - * NAS100D platform specific definitions - * - * Copyright (c) 2005 Tower Technologies - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <asm/hardware.h>" -#endif - -#define NAS100D_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define NAS100D_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define NAS100D_SDA_PIN 5 -#define NAS100D_SCL_PIN 6 - -/* - * NAS100D PCI IRQs - */ -#define NAS100D_PCI_MAX_DEV 5 -#define NAS100D_PCI_IRQ_LINES 5 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NAS100D_PCI_INTA_PIN 11 -#define NAS100D_PCI_INTB_PIN 10 -#define NAS100D_PCI_INTC_PIN 9 -#define NAS100D_PCI_INTD_PIN 8 -#define NAS100D_PCI_INTE_PIN 7 - -/* GPIO */ - -#define NAS100D_GPIO0 0 -#define NAS100D_GPIO1 1 -#define NAS100D_GPIO2 2 -#define NAS100D_GPIO3 3 -#define NAS100D_GPIO4 4 -#define NAS100D_GPIO5 5 -#define NAS100D_GPIO6 6 -#define NAS100D_GPIO7 7 -#define NAS100D_GPIO8 8 -#define NAS100D_GPIO9 9 -#define NAS100D_GPIO10 10 -#define NAS100D_GPIO11 11 -#define NAS100D_GPIO12 12 -#define NAS100D_GPIO13 13 -#define NAS100D_GPIO14 14 -#define NAS100D_GPIO15 15 - - -/* Buttons */ - -#define NAS100D_PB_GPIO NAS100D_GPIO14 -#define NAS100D_RB_GPIO NAS100D_GPIO4 -#define NAS100D_PO_GPIO NAS100D_GPIO12 /* power off */ - -#define NAS100D_PB_IRQ IRQ_IXP4XX_GPIO14 -#define NAS100D_RB_IRQ IRQ_IXP4XX_GPIO4 - -/* -#define NAS100D_PB_BM (1L << NAS100D_PB_GPIO) -#define NAS100D_PO_BM (1L << NAS100D_PO_GPIO) -#define NAS100D_RB_BM (1L << NAS100D_RB_GPIO) -*/ diff --git a/packages/linux/nas100d-kernel_2.6.14.bb b/packages/linux/nas100d-kernel_2.6.14.bb deleted file mode 100644 index 5d4a1ed1b4..0000000000 --- a/packages/linux/nas100d-kernel_2.6.14.bb +++ /dev/null @@ -1,40 +0,0 @@ -# Kernel for NAS 100d -# -# Increment PR_CONFIG for changes to the nas100d-kernel specific -# defconfig (do *NOT* increment anything in here for changes -# to other kernel configs!) -PR_CONFIG = "0" -# -# Increment the number below (i.e. the digits after PR) when -# making changes within this file or for changes to the patches -# applied to the kernel. -PR = "r0.${PR_CONFIG}" - -N1K_FILES = "\ - arch/arm/mach-ixp4xx/nas100d-pci.c \ - arch/arm/mach-ixp4xx/nas100d-power.c \ - arch/arm/mach-ixp4xx/nas100d-setup.c \ - include/asm-arm/arch-ixp4xx/nas100d.h \ -" - -N1K_PATCHES = "\ - file://10-ixp4xx-copy-from.patch;patch=1 \ - file://10-ixp4xx-le.patch;patch=1 \ - file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ - file://15-ixp4xx-writesb-l-w.patch;patch=1 \ - file://18-ixp4xx-io-h-addr.patch;patch=1 \ - file://28-spinlock-up.patch;patch=1 \ - file://29-ipv4-route-c-spinlock.patch;patch=1 \ - file://50-nas100d-arch.patch;patch=1 \ - file://60-nas100d-ide.patch;patch=1 \ - file://60-nas100d-i2c.patch;patch=1 \ - file://90-ixp4xx-pci-le.patch;patch=1 \ -" - -include nas100d-kernel.inc - -# These options get added to the kernel command line, only put things -# specific to the bootstrap of *this* kernel in here - DISTRO specfic -# config must be in CMDLINE_ROOT (see the full definition of CMDLINE -# in nas100d-kernel.inc) -# CMDLINE_KERNEL_OPTIONS = "x1205.hctosys=1" diff --git a/packages/linux/nas100d-kernel_2.6.15-rc1.bb b/packages/linux/nas100d-kernel_2.6.15-rc1.bb deleted file mode 100644 index 3155a5ecd0..0000000000 --- a/packages/linux/nas100d-kernel_2.6.15-rc1.bb +++ /dev/null @@ -1,37 +0,0 @@ -# Kernel for NAS 100d -# -# Increment PR_CONFIG for changes to the nas100d-kernel specific -# defconfig (do *NOT* increment anything in here for changes -# to other kernel configs!) -PR_CONFIG = "0" -# -# Increment the number below (i.e. the digits after PR) when -# making changes within this file or for changes to the patches -# applied to the kernel. -PR = "r0.${PR_CONFIG}" - -N1K_FILES = "\ - arch/arm/mach-ixp4xx/nas100d-pci.c \ - arch/arm/mach-ixp4xx/nas100d-power.c \ - arch/arm/mach-ixp4xx/nas100d-setup.c \ - include/asm-arm/arch-ixp4xx/nas100d.h \ -" - -N1K_PATCHES = "\ - file://00-memory-h-page-shift.patch;patch=1 \ - file://01-i2c-ixp4xx.patch;patch=1 \ - file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ - file://19-jffs2-force-be.patch;patch=1 \ - file://50-nas100d-arch.patch;patch=1 \ - file://60-nas100d-ide.patch;patch=1 \ - file://60-nas100d-i2c.patch;patch=1 \ - file://90-ixp4xx-nslu2.patch;patch=1 \ -" - -include nas100d-kernel.inc - -# These options get added to the kernel command line, only put things -# specific to the bootstrap of *this* kernel in here - DISTRO specfic -# config must be in CMDLINE_ROOT (see the full definition of CMDLINE -# in nas100d-kernel.inc) -CMDLINE_KERNEL_OPTIONS = "pcf8563.hctosys=1" diff --git a/packages/linux/nas100d-kernel_2.6.15-rc2.bb b/packages/linux/nas100d-kernel_2.6.15-rc2.bb deleted file mode 100644 index d3e5ae23d6..0000000000 --- a/packages/linux/nas100d-kernel_2.6.15-rc2.bb +++ /dev/null @@ -1,31 +0,0 @@ -# Kernel for Iomega NAS 100d -# -# Increment PR_CONFIG for changes to the nas100d-kernel specific -# defconfig (do *NOT* increment anything in here for changes -# to other kernel configs!) -PR_CONFIG = "0" -# -# Increment the number below (i.e. the digits after PR) when -# making changes within this file or for changes to the patches -# applied to the kernel. -PR = "r0.${PR_CONFIG}" - -include nas100d-kernel.inc - -# N1K_PATCHES - full list of patches to apply -N1K_PATCHES = "\ - file://00-memory-h-page-shift.patch;patch=1 \ - file://10-mtdpart-redboot-fis-byteswap.patch;patch=1 \ - file://19-jffs2-force-be.patch;patch=1 \ - file://50-nas100d-arch.patch;patch=1 \ - file://55-nas100d-arch.patch;patch=1 \ - file://60-nas100d-ide.patch;patch=1 \ - file://60-nas100d-i2c.patch;patch=1 \ - file://90-ixp4xx-nslu2.patch;patch=1 \ -" - -# These options get added to the kernel command line, only put things -# specific to the bootstrap of *this* kernel in here - DISTRO specfic -# config must be in CMDLINE_ROOT (see the full definition of CMDLINE -# in nas100d-kernel.inc) -CMDLINE_KERNEL_OPTIONS = "pcf8563.hctosys=1" |