summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--conf/bitbake.conf2
-rw-r--r--conf/machine/include/handheld-common.conf2
-rw-r--r--conf/machine/include/zaurus-clamshell-2.4.conf2
-rw-r--r--conf/machine/include/zaurus-clamshell-2.6.conf3
-rw-r--r--conf/machine/qemuarm.conf2
-rw-r--r--packages/linux/linux-openzaurus_2.6.15.bb27
-rw-r--r--packages/wpa-supplicant/files/defaults-gnutls8
-rw-r--r--packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls499
-rw-r--r--packages/wpa-supplicant/wpa-supplicant_0.5.1.bb25
-rw-r--r--packages/zd1211/zd1211-r59/makefile-unslung.patch48
-rw-r--r--packages/zd1211/zd1211_r59.bb6
11 files changed, 102 insertions, 522 deletions
diff --git a/conf/bitbake.conf b/conf/bitbake.conf
index 71dc101f0f..36d4c331b9 100644
--- a/conf/bitbake.conf
+++ b/conf/bitbake.conf
@@ -298,7 +298,7 @@ export palmqtdir = "/opt/QtPalmtop"
GNU_MIRROR = "ftp://ftp.gnu.org/gnu"
DEBIAN_MIRROR = "ftp://ftp.debian.org/debian/pool"
SOURCEFORGE_MIRROR = "http://heanet.dl.sourceforge.net/sourceforge"
-GPE_MIRROR = "http://ftp.handhelds.org/pub/projects/gpe/source"
+GPE_MIRROR = "http://handhelds.org/pub/projects/gpe/source"
XLIBS_MIRROR = "http://xlibs.freedesktop.org/release"
XORG_MIRROR = "http://xorg.freedesktop.org/releases"
GNOME_MIRROR = "http://ftp.gnome.org/pub/GNOME/sources"
diff --git a/conf/machine/include/handheld-common.conf b/conf/machine/include/handheld-common.conf
index fbecc6e25c..57afe89ce7 100644
--- a/conf/machine/include/handheld-common.conf
+++ b/conf/machine/include/handheld-common.conf
@@ -20,6 +20,6 @@ PCMCIA_MANAGER ?= "pcmcia-cs"
# Configuration bits for "generic handheld"
BOOTSTRAP_EXTRA_RDEPENDS += "${PCMCIA_MANAGER} apm apmd network-suspend-scripts"
-BOOTSTRAP_EXTRA_RRECOMMENDS += "ppp wireless-tools irda-utils openswan wpa-supplicant-nossl lrzsz ppp-dialin ${@linux_module_packages('${HANDHELD_MODULES}', d)}"
+BOOTSTRAP_EXTRA_RRECOMMENDS += "ppp wireless-tools irda-utils openswan wpa-supplicant lrzsz ppp-dialin ${@linux_module_packages('${HANDHELD_MODULES}', d)}"
INHERIT += "linux_modules"
diff --git a/conf/machine/include/zaurus-clamshell-2.4.conf b/conf/machine/include/zaurus-clamshell-2.4.conf
index 184258c8b6..c8be696358 100644
--- a/conf/machine/include/zaurus-clamshell-2.4.conf
+++ b/conf/machine/include/zaurus-clamshell-2.4.conf
@@ -11,7 +11,7 @@ PREFERRED_VERSION_orinoco-modules = "0.13e"
BOOTSTRAP_EXTRA_RDEPENDS += "kernel hostap-modules-cs orinoco-modules-cs sharp-sdmmc-support \
pcmcia-cs apmd apm wireless-tools console-tools irda-utils hostap-utils prism3-firmware prism3-support \
-wpa-supplicant-nossl ppp ppp-dialin openswan"
+wpa-supplicant ppp ppp-dialin openswan"
# Misc Modules
BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-net-fd kernel-module-registers"
diff --git a/conf/machine/include/zaurus-clamshell-2.6.conf b/conf/machine/include/zaurus-clamshell-2.6.conf
index d3882b7f65..aa840586a6 100644
--- a/conf/machine/include/zaurus-clamshell-2.6.conf
+++ b/conf/machine/include/zaurus-clamshell-2.6.conf
@@ -2,11 +2,10 @@
# Don't forget to include zaurus-clamshell.conf as well
PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus"
-PREFERRED_VERSION_wpa_supplicant = "0.4.7"
BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils spectrum-fw \
pcmcia-cs apm wireless-tools irda-utils udev-utils console-tools hostap-utils prism3-firmware prism3-support \
-ppp ppp-dialin openswan wpa-supplicant-nossl alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf"
+ppp ppp-dialin openswan wpa-supplicant alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf"
# Ethernet modules
BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcnet-cs"
diff --git a/conf/machine/qemuarm.conf b/conf/machine/qemuarm.conf
index 2238f6673e..6c857b6bb9 100644
--- a/conf/machine/qemuarm.conf
+++ b/conf/machine/qemuarm.conf
@@ -19,7 +19,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-openzaurus"
BOOTSTRAP_EXTRA_RDEPENDS += "kernel udev sysfsutils spectrum-fw \
pcmciautils apm wireless-tools irda-utils udev-utils console-tools hostap-utils prism3-firmware prism3-support \
-ppp ppp-dialin openswan wpa-supplicant-nossl alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf"
+ppp ppp-dialin openswan wpa-supplicant alsa-utils-alsactl alsa-utils-alsamixer module-init-tools alsa-conf"
# Ethernet modules
#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcnet-cs"
diff --git a/packages/linux/linux-openzaurus_2.6.15.bb b/packages/linux/linux-openzaurus_2.6.15.bb
index e65c21d55d..298553e7bf 100644
--- a/packages/linux/linux-openzaurus_2.6.15.bb
+++ b/packages/linux/linux-openzaurus_2.6.15.bb
@@ -1,6 +1,6 @@
include linux-openzaurus.inc
-PR = "r11"
+PR = "r12"
# Handy URLs
# git://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git \
@@ -27,17 +27,17 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.15.tar.bz2 \
${RPSRC}/sharpsl_pm_move-r0.patch;patch=1 \
${RPSRC}/sharpsl_pm_gcc4_fix-r0.patch;patch=1 \
${RPSRC}/pcmcia_dev_ids-r3.patch;patch=1 \
- ${RPSRC}/led_core-r12.patch;patch=1 \
- ${RPSRC}/led_triggers-r10.patch;patch=1 \
- ${RPSRC}/led_trig_timer-r5.patch;patch=1 \
- ${RPSRC}/led_trig_sharpsl_pm-r4a.patch;patch=1 \
- ${RPSRC}/led_zaurus-r9.patch;patch=1 \
- ${RPSRC}/led_locomo-r6.patch;patch=1 \
- ${RPSRC}/led_ixp4xx-r1.patch;patch=1 \
- ${RPSRC}/led_tosa-r3.patch;patch=1 \
- ${RPSRC}/led_ide-r3.patch;patch=1 \
- ${RPSRC}/led_nand-r2.patch;patch=1 \
- ${RPSRC}/ide_end_request-r0.patch;patch=1 \
+ ${RPSRC}/led_core-r14.patch;patch=1 \
+ ${RPSRC}/led_triggers-r11.patch;patch=1 \
+ ${RPSRC}/led_trig_timer-r6.patch;patch=1 \
+ ${RPSRC}/led_trig_sharpsl_pm-r5a.patch;patch=1 \
+ ${RPSRC}/led_zaurus-r10.patch;patch=1 \
+ ${RPSRC}/led_locomo-r7.patch;patch=1 \
+ ${RPSRC}/led_ixp4xx-r2.patch;patch=1 \
+ ${RPSRC}/led_tosa-r4.patch;patch=1 \
+ ${RPSRC}/led_ide-r4a.patch;patch=1 \
+ ${RPSRC}/led_nand-r3.patch;patch=1 \
+ ${RPSRC}/ide_end_request-r1.patch;patch=1 \
${RPSRC}/pxa_timerfix-r0.patch;patch=1 \
${RPSRC}/rtc_class-r0.patch;patch=1 \
${RPSRC}/rtc_class_pxa-r0.patch;patch=1 \
@@ -82,7 +82,6 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.15.tar.bz2 \
${RPSRC}/pxa-linking-bug.patch;patch=1 \
file://serial-add-support-for-non-standard-xtals-to-16c950-driver.patch;patch=1 \
file://connectplus-remove-ide-HACK.patch;patch=1 \
- file://gcc4-ledclass-static-order-hack.patch;patch=1 \
file://defconfig-c7x0 \
file://defconfig-ipaq-pxa270 \
file://defconfig-collie \
@@ -91,8 +90,6 @@ SRC_URI = "http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.15.tar.bz2 \
file://defconfig-qemuarm \
file://defconfig-tosa "
-# ${RPSRC}/mmc_timeout-r0.patch;patch=1 \
-
# Disabled until I find the reason this gives issues with cdc_subset
# ${RPSRC}/usb_rndis_tweaks-r0.patch;patch=1 \
diff --git a/packages/wpa-supplicant/files/defaults-gnutls b/packages/wpa-supplicant/files/defaults-gnutls
new file mode 100644
index 0000000000..67c4cbddf8
--- /dev/null
+++ b/packages/wpa-supplicant/files/defaults-gnutls
@@ -0,0 +1,8 @@
+# Useful flags:
+# -i <ifname> Interface (required, unless specified in config)
+# -D <driver> Wireless Driver
+# -d Debugging (-dd for more)
+# -q Quiet (-qq for more)
+
+CONFIG="/etc/wpa_supplicant.conf"
+OPTIONS="-i eth1 -D wext"
diff --git a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
index da407b5ef3..c91ffe0c84 100644
--- a/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
+++ b/packages/wpa-supplicant/files/wpa_supplicant.conf-gnutls
@@ -1,502 +1,7 @@
-##### Example wpa_supplicant configuration file ###############################
-# Empty lines and lines starting with # are ignored
-
-# NOTE! This file may contain password information and should probably be made
-# readable only by root user on multiuser systems.
-
-# global configuration (shared by all network blocks)
-#
-# Interface for separate control program. If this is specified, wpa_supplicant
-# will create this directory and a UNIX domain socket for listening to requests
-# from external programs (CLI/GUI, etc.) for status information and
-# configuration. The socket file will be named based on the interface name, so
-# multiple wpa_supplicant processes can be run at the same time if more than
-# one interface is used.
-# /var/run/wpa_supplicant is the recommended directory for sockets and by
-# default, wpa_cli will use it when trying to connect with wpa_supplicant.
ctrl_interface=/var/run/wpa_supplicant
-
-# Access control for the control interface can be configured by setting the
-# directory to allow only members of a group to use sockets. This way, it is
-# possible to run wpa_supplicant as root (since it needs to change network
-# configuration and open raw sockets) and still allow GUI/CLI components to be
-# run as non-root users. However, since the control interface can be used to
-# change the network configuration, this access needs to be protected in many
-# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
-# want to allow non-root users to use the control interface, add a new group
-# and change this value to match with that group. Add users that should have
-# control interface access to this group. If this variable is commented out or
-# not included in the configuration file, group will not be changed from the
-# value it got by default when the directory or socket was created.
-#
-# This variable can be a group name or gid.
-#ctrl_interface_group=wheel
ctrl_interface_group=0
+update_config=1
-# IEEE 802.1X/EAPOL version
-# wpa_supplicant was implemented based on IEEE 802-1X-REV-d8 which defines
-# EAPOL version 2. However, there are many APs that do not handle the new
-# version number correctly (they seem to drop the frames completely). In order
-# to make wpa_supplicant interoperate with these APs, the version number is set
-# to 1 by default. This configuration value can be used to set it to the new
-# version (2).
-eapol_version=1
-
-# AP scanning/selection
-# By default, wpa_supplicant requests driver to perform AP scanning and then
-# uses the scan results to select a suitable AP. Another alternative is to
-# allow the driver to take care of AP scanning and selection and use
-# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
-# information from the driver.
-# 1: wpa_supplicant initiates scanning and AP selection
-# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
-# parameters (e.g., WPA IE generation); this mode can also be used with
-# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
-# APs (i.e., external program needs to control association)
-# 2: like 0, but associate with APs using security policy and SSID (but not
-# BSSID); this can be used, e.g., with ndiswrapper and NDIS driver to
-# enable operation with hidden SSIDs and optimized roaming; in this mode,
-# only the first network block in the configuration file is used and this
-# configuration should have explicit security policy (i.e., only one option
-# in the lists) for key_mgmt, pairwise, group, proto variables
-ap_scan=1
-
-# EAP fast re-authentication
-# By default, fast re-authentication is enabled for all EAP methods that
-# support it. This variable can be used to disable fast re-authentication.
-# Normally, there is no need to disable this.
-fast_reauth=1
-
-# network block
-#
-# Each network (usually AP's sharing the same SSID) is configured as a separate
-# block in this configuration file. The network blocks are in preference order
-# (the first match is used).
-#
-# network block fields:
-#
-# ssid: SSID (mandatory); either as an ASCII string with double quotation or
-# as hex string; network name
-#
-# scan_ssid:
-# 0 = do not scan this SSID with specific Probe Request frames (default)
-# 1 = scan with SSID-specific Probe Request frames (this can be used to
-# find APs that do not accept broadcast SSID or use multiple SSIDs;
-# this will add latency to scanning, so enable this only when needed)
-#
-# bssid: BSSID (optional); if set, this network block is used only when
-# associating with the AP using the configured BSSID
-#
-# priority: priority group (integer)
-# By default, all networks will get same priority group (0). If some of the
-# networks are more desirable, this field can be used to change the order in
-# which wpa_supplicant goes through the networks when selecting a BSS. The
-# priority groups will be iterated in decreasing priority (i.e., the larger the
-# priority value, the sooner the network is matched against the scan results).
-# Within each priority group, networks will be selected based on security
-# policy, signal strength, etc.
-# Please note that AP scanning with scan_ssid=1 is not using this priority to
-# select the order for scanning. Instead, it uses the order the networks are in
-# the configuration file.
-#
-# mode: IEEE 802.11 operation mode
-# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
-# 1 = IBSS (ad-hoc, peer-to-peer)
-# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
-# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
-# to be set to 2 for IBSS. WPA-None requires following network block options:
-# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
-# both), and psk must also be set.
-#
-# proto: list of accepted protocols
-# WPA = WPA/IEEE 802.11i/D3.0
-# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
-# If not set, this defaults to: WPA RSN
-#
-# key_mgmt: list of accepted authenticated key management protocols
-# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
-# WPA-EAP = WPA using EAP authentication (this can use an external
-# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
-# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
-# generated WEP keys
-# NONE = WPA is not used; plaintext or static WEP could be used
-# If not set, this defaults to: WPA-PSK WPA-EAP
-#
-# auth_alg: list of allowed IEEE 802.11 authentication algorithms
-# OPEN = Open System authentication (required for WPA/WPA2)
-# SHARED = Shared Key authentication (requires static WEP keys)
-# LEAP = LEAP/Network EAP (only used with LEAP)
-# If not set, automatic selection is used (Open System with LEAP enabled if
-# LEAP is allowed as one of the EAP methods).
-#
-# pairwise: list of accepted pairwise (unicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# NONE = Use only Group Keys (deprecated, should not be included if APs support
-# pairwise keys)
-# If not set, this defaults to: CCMP TKIP
-#
-# group: list of accepted group (broadcast/multicast) ciphers for WPA
-# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
-# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
-# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
-# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
-# If not set, this defaults to: CCMP TKIP WEP104 WEP40
-#
-# psk: WPA preshared key; 256-bit pre-shared key
-# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
-# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
-# generated using the passphrase and SSID). ASCII passphrase must be between
-# 8 and 63 characters (inclusive).
-# This field is not needed, if WPA-EAP is used.
-# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
-# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
-# startup and reconfiguration time can be optimized by generating the PSK only
-# only when the passphrase or SSID has actually changed.
-#
-# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
-# Dynamic WEP key require for non-WPA mode
-# bit0 (1): require dynamically generated unicast WEP key
-# bit1 (2): require dynamically generated broadcast WEP key
-# (3 = require both keys; default)
-#
-# Following fields are only used with internal EAP implementation.
-# eap: space-separated list of accepted EAP methods
-# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
-# cannot be used with WPA; to be used as a Phase 2 method
-# with EAP-PEAP or EAP-TTLS)
-# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# OTP = EAP-OTP (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# GTC = EAP-GTC (cannot be used separately with WPA; to be used
-# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
-# TLS = EAP-TLS (client and server certificate)
-# PEAP = EAP-PEAP (with tunnelled EAP authentication)
-# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
-# authentication)
-# If not set, all compiled in methods are allowed.
-#
-# identity: Identity string for EAP
-# anonymous_identity: Anonymous identity string for EAP (to be used as the
-# unencrypted identity with EAP types that support different tunnelled
-# identity, e.g., EAP-TTLS)
-# password: Password string for EAP
-# ca_cert: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert is not included, server certificate
-# will not be verified. This is insecure and the CA file should always be
-# configured.
-# client_cert: File path to client certificate file (PEM/DER)
-# private_key: File path to client private key file (PEM/DER/PFX)
-# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
-# commented out. Both the private key and certificate will be read from
-# the PKCS#12 file in this case.
-# private_key_passwd: Password for private key file
-# dh_file: File path to DH/DSA parameters file (in PEM format)
-# This is an optional configuration file for setting parameters for an
-# ephemeral DH key exchange. In most cases, the default RSA
-# authentication does not use this configuration. However, it is possible
-# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
-# DSA keys always use ephemeral DH keys. This can be used to achieve
-# forward secrecy. If the file is in DSA parameters format, it will be
-# automatically converted into DH params.
-# subject_match: Substring to be matched against the subject of the
-# authentication server certificate. If this string is set, the server
-# sertificate is only accepted if it contains this string in the subject.
-# The subject string is in following format:
-# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
-# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
-# (string with field-value pairs, e.g., "peapver=0" or
-# "peapver=1 peaplabel=1")
-# 'peapver' can be used to force which PEAP version (0 or 1) is used.
-# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
-# to be used during key derivation when PEAPv1 or newer. Most existing
-# PEAPv1 implementation seem to be using the old label, "client EAP
-# encryption", and wpa_supplicant is now using that as the default value.
-# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
-# interoperate with PEAPv1; see eap_testing.txt for more details.
-# 'peap_outer_success=0' can be used to terminate PEAP authentication on
-# tunneled EAP-Success. This is required with some RADIUS servers that
-# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
-# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
-# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
-# challenges (by default, it accepts 2 or 3)
-# phase2: Phase2 (inner authentication with TLS tunnel) parameters
-# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
-# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
-# Following certificate/private key fields are used in inner Phase2
-# authentication when using EAP-TTLS or EAP-PEAP.
-# ca_cert2: File path to CA certificate file. This file can have one or more
-# trusted CA certificates. If ca_cert2 is not included, server
-# certificate will not be verified. This is insecure and the CA file
-# should always be configured.
-# client_cert2: File path to client certificate file
-# private_key2: File path to client private key file
-# private_key2_passwd: Password for private key file
-# dh_file2: File path to DH/DSA parameters file (in PEM format)
-# subject_match2: Substring to be matched against the subject of the
-# authentication server certificate.
-#
-# EAP-PSK variables:
-# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
-# nai: user NAI
-# server_nai: authentication server NAI
-#
-# EAP-FAST variables:
-# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
-# to create this file and write updates to it when PAC is being
-# provisioned or refreshed.
-# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
-# credentials (PAC)
-#
-# wpa_supplicant supports number of "EAP workarounds" to work around
-# interoperability issues with incorrectly behaving authentication servers.
-# These are enabled by default because some of the issues are present in large
-# number of authentication servers. Strict EAP conformance mode can be
-# configured by disabling workarounds with eap_workaround=0.
-
-# Example blocks:
-
-# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
-network={
- ssid="simple"
- psk="very secret passphrase"
- priority=5
-}
-
-# Same as previous, but request SSID-specific scanning (for APs that reject
-# broadcast SSID)
-network={
- ssid="second ssid"
- scan_ssid=1
- psk="very secret passphrase"
- priority=2
-}
-
-# Only WPA-PSK is used. Any valid cipher combination is accepted.
-network={
- ssid="example"
- proto=WPA
- key_mgmt=WPA-PSK
- pairwise=CCMP TKIP
- group=CCMP TKIP WEP104 WEP40
- psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
- priority=2
-}
-
-# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
-# or WEP40 as the group cipher will not be accepted.
-network={
- ssid="example"
- proto=RSN
- key_mgmt=WPA-EAP
- pairwise=CCMP TKIP
- group=CCMP TKIP
- eap=TLS
- identity="user@example.com"
- ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
- private_key="/etc/cert/user.prv"
- private_key_passwd="password"
- priority=1
-}
-
-# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
-# (e.g., Radiator)
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=PEAP
- identity="user@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- phase1="peaplabel=1"
- phase2="auth=MSCHAPV2"
- priority=10
-}
-
-# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
-# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=TTLS
- identity="user@example.com"
- anonymous_identity="anonymous@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- priority=2
-}
-
-# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
-# use. Real identity is sent only within an encrypted TLS tunnel.
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=TTLS
- identity="user@example.com"
- anonymous_identity="anonymous@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- phase2="auth=MSCHAPV2"
-}
-
-# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
-# authentication.
-network={
- ssid="example"
- key_mgmt=WPA-EAP
- eap=TTLS
- # Phase1 / outer authentication
- anonymous_identity="anonymous@example.com"
- ca_cert="/etc/cert/ca.pem"
- # Phase 2 / inner authentication
- phase2="autheap=TLS"
- ca_cert2="/etc/cert/ca2.pem"
- client_cert2="/etc/cer/user.pem"
- private_key2="/etc/cer/user.prv"
- private_key2_passwd="password"
- priority=2
-}
-
-# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
-# group cipher.
-network={
- ssid="example"
- bssid=00:11:22:33:44:55
- proto=WPA RSN
- key_mgmt=WPA-PSK WPA-EAP
- pairwise=CCMP
- group=CCMP
- psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
-}
-
-# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
-# and all valid ciphers.
-network={
- ssid=00010203
- psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
-}
-
-
-# EAP-SIM with a GSM SIM or USIM
-network={
- ssid="eap-sim-test"
- key_mgmt=WPA-EAP
- eap=SIM
- pin="1234"
- pcsc=""
-}
-
-
-# EAP-PSK
-network={
- ssid="eap-psk-test"
- key_mgmt=WPA-EAP
- eap=PSK
- identity="eap_psk_user"
- eappsk=06b4be19da289f475aa46a33cb793029
- nai="eap_psk_user@example.com"
- server_nai="as@example.com"
-}
-
-
-# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
-# EAP-TLS for authentication and key generation; require both unicast and
-# broadcast WEP keys.
-network={
- ssid="1x-test"
- key_mgmt=IEEE8021X
- eap=TLS
- identity="user@example.com"
- ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
- private_key="/etc/cert/user.prv"
- private_key_passwd="password"
- eapol_flags=3
-}
-
-
-# LEAP with dynamic WEP keys
-network={
- ssid="leap-example"
- key_mgmt=IEEE8021X
- eap=LEAP
- identity="user"
- password="foobar"
-}
-
-# EAP-FAST with WPA (WPA or WPA2)
-network={
- ssid="eap-fast-test"
- key_mgmt=WPA-EAP
- eap=FAST
- anonymous_identity="FAST-000102030405"
- identity="username"
- password="password"
- phase1="fast_provisioning=1"
- pac_file="/etc/wpa_supplicant.eap-fast-pac"
-}
-
-# Plaintext connection (no WPA, no IEEE 802.1X)
-network={
- ssid="plaintext-test"
- key_mgmt=NONE
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X)
-network={
- ssid="static-wep-test"
- key_mgmt=NONE
- wep_key0="abcde"
- wep_key1=0102030405
- wep_key2="1234567890123"
- wep_tx_keyidx=0
- priority=5
-}
-
-
-# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
-# IEEE 802.11 authentication
-network={
- ssid="static-wep-test2"
- key_mgmt=NONE
- wep_key0="abcde"
- wep_key1=0102030405
- wep_key2="1234567890123"
- wep_tx_keyidx=0
- priority=5
- auth_alg=SHARED
-}
-
-
-# IBSS/ad-hoc network with WPA-None/TKIP.
-network={
- ssid="test adhoc"
- mode=1
- proto=WPA
- key_mgmt=WPA-NONE
- pairwise=NONE
- group=TKIP
- psk="secret passphrase"
-}
-
-
-# Catch all example that allows more or less all configuration modes
network={
- ssid="example"
- scan_ssid=1
- key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
- pairwise=CCMP TKIP
- group=CCMP TKIP WEP104 WEP40
- psk="very secret passphrase"
- eap=TTLS PEAP TLS
- identity="user@example.com"
- password="foobar"
- ca_cert="/etc/cert/ca.pem"
- client_cert="/etc/cert/user.pem"
- private_key="/etc/cert/user.prv"
- private_key_passwd="password"
- phase1="peaplabel=0"
+ key_mgmt=NONE
}
diff --git a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb
index 05d82cd892..67e5c421ca 100644
--- a/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb
+++ b/packages/wpa-supplicant/wpa-supplicant_0.5.1.bb
@@ -4,13 +4,26 @@ LICENSE = "GPL"
MAINTAINER = "Holger Schurig"
HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
DEPENDS = "gnutls"
+PR = "r1"
SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
file://defconfig-gnutls \
+ file://init.sh \
+ file://defaults-gnutls \
file://wpa_supplicant.conf-gnutls"
S = "${WORKDIR}/wpa_supplicant-${PV}"
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli"
+FILES_wpa-supplicant-passphrase = "/usr/sbin/wpa_passphrase"
+FILES_wpa-supplicant-cli = "/usr/sbin/wpa_cli"
+
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+INITSCRIPT_NAME = "wpa"
+INITSCRIPT_PARAMS = "defaults 10"
+inherit update-rc.d
+
do_configure () {
install -m 0755 ${WORKDIR}/defconfig-gnutls .config
}
@@ -25,9 +38,15 @@ do_install () {
install -m755 wpa_passphrase ${D}${sbindir}
install -m755 wpa_cli ${D}${sbindir}
- install -d ${D}${sysconfdir}
- install -m644 ${WORKDIR}/wpa_supplicant.conf-gnutls ${D}${sysconfdir}/wpa_supplicant.conf
+ install -d ${D}${localstatedir}/run/wpa_supplicant
install -d ${D}${docdir}/wpa_supplicant
- install -m644 README ${D}${docdir}/wpa_supplicant
+ install -m644 README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+ install -d ${D}${sysconfdir}/init.d
+ install -m700 ${WORKDIR}/init.sh ${D}${sysconfdir}/init.d/wpa
+
+ install -d ${D}${sysconfdir}/default
+ install -m600 ${WORKDIR}/defaults-gnutls ${D}${sysconfdir}/default/wpa
+ install -m600 ${WORKDIR}/wpa_supplicant.conf-gnutls ${D}${sysconfdir}/wpa_supplicant.conf
}
diff --git a/packages/zd1211/zd1211-r59/makefile-unslung.patch b/packages/zd1211/zd1211-r59/makefile-unslung.patch
new file mode 100644
index 0000000000..3ad1e24424
--- /dev/null
+++ b/packages/zd1211/zd1211-r59/makefile-unslung.patch
@@ -0,0 +1,48 @@
+--- zd1211-driver-r59/Makefile.orig 2006-02-25 16:04:26.000000000 +0100
++++ zd1211-driver-r59/Makefile 2006-02-25 17:11:27.000000000 +0100
+@@ -4,24 +4,23 @@
+ #
+ #
+
+-CC=gcc
+-CPP=g++
+-LD=ld
+-rM=rm -f -r
++CC ?= gcc
++CPP ?= g++
++LD ?= ld
+
+-MODPATH := /lib/modules/$(shell uname -r)
++MODPATH ?= /lib/modules/$(shell uname -r)
+
+ # if the kernel is 2.6.x, turn on this
+-KERN_26=y
++#KERN_26=y
+
+-KERNEL_SOURCE=$(MODPATH)/source
++KERNEL_SOURCE ?= $(MODPATH)/source
+ #KERNEL_SOURCE=/usr/src/linux
+
+ # set to 1 for zd1211b
+ ZD1211REV_B=0
+
+-SRC_DIR=src
+-DEFINES=-D__KERNEL__ -DMODULE=1
++SRC_DIR=src
++DEFINES ?=-D__KERNEL__ -DMODULE=1
+
+
+
+@@ -227,9 +226,9 @@
+ depmod -a
+
+ #for apdbg
+- gcc -o apdbg apdbg.c
+- chmod +x apdbg
+- cp ./apdbg /sbin/apdbg
++# gcc -o apdbg apdbg.c
++# chmod +x apdbg
++# cp ./apdbg /sbin/apdbg
+
+ clean:
+ rm -rf .tmp_versions .*.cmd *.ko *.mod.c *.mod.o *.o $(SRC_DIR)/*.o $(SRC_DIR)/.*.o.cmd
diff --git a/packages/zd1211/zd1211_r59.bb b/packages/zd1211/zd1211_r59.bb
index c801b81790..af03e7657f 100644
--- a/packages/zd1211/zd1211_r59.bb
+++ b/packages/zd1211/zd1211_r59.bb
@@ -3,13 +3,17 @@ PRIORITY = "optional"
SECTION = "kernel/modules"
MAINTAINER = "Oyvind Repvik <nail@nslu2-linux.org>"
LICENSE = "GPL"
-PR = "r1"
+PR = "r2"
RDEPENDS = "wireless-tools"
SRC_URI = "http://zd1211.ath.cx/download/zd1211-driver-${PV}.tgz \
file://makefile.patch;patch=1 \
"
+SRC_URI_unslung = "http://zd1211.ath.cx/download/zd1211-driver-${PV}.tgz \
+ file://makefile-unslung.patch;patch=1 \
+ "
+
S = "${WORKDIR}/zd1211-driver-${PV}"
inherit module
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 08:20:35 +0000