diff options
| -rw-r--r-- | packages/linux/linux-storcenter/10-command-line.patch | 26 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/defconfig-2.6.12.6 | 1118 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/defconfig-2.6.15.7 | 1176 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/defconfig-2.6.27.7 | 1971 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/kernel.patch-2.6.12.6 | 9895 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/kernel.patch-2.6.15.7 | 1181 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter_2.6.12.6.bb | 50 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter_2.6.15.7.bb | 25 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter_2.6.27.7.bb | 57 |
9 files changed, 2028 insertions, 13471 deletions
diff --git a/packages/linux/linux-storcenter/10-command-line.patch b/packages/linux/linux-storcenter/10-command-line.patch deleted file mode 100644 index 6d2647bdcc..0000000000 --- a/packages/linux/linux-storcenter/10-command-line.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- linux-2.6.12.6.orig/arch/ppc/platforms/iomega8241.c 2006-10-31 08:48:09.000000000 -0800 -+++ linux-2.6.12.6/arch/ppc/platforms/iomega8241.c 2006-11-08 08:19:58.000000000 -0800 -@@ -82,6 +82,10 @@ - - static void iomega8241_halt(void); - -+static char iomega8241_command_line[] __initdata = -+ "root=/dev/mtdblock2 rootfstype=jffs2 rw init=/linuxrc " -+ CONFIG_CMDLINE; -+ - /* - * Define all of the IRQ senses and polarities. - */ -@@ -519,6 +523,12 @@ - strcpy(cmd_line, (char *)(r6+KERNELBASE)); - } - -+ /* -+ * Just use our command line, no matter what -+ */ -+ strlcpy(cmd_line, iomega8241_command_line, COMMAND_LINE_SIZE); -+ -+ - #ifdef CONFIG_BLK_DEV_INITRD - /* take care of initrd if we have one */ - if (r4) { diff --git a/packages/linux/linux-storcenter/defconfig-2.6.12.6 b/packages/linux/linux-storcenter/defconfig-2.6.12.6 deleted file mode 100644 index b13efc72bf..0000000000 --- a/packages/linux/linux-storcenter/defconfig-2.6.12.6 +++ /dev/null @@ -1,1118 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12.6 -# Mon Oct 23 17:26:36 2006 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -# CONFIG_KOBJECT_UEVENT is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_GEN550=y -# CONFIG_PM is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MCPN765 is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -CONFIG_IOMEGA8241=y -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -# CONFIG_ADS8272 is not set -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -# CONFIG_MPC834x_SYS is not set -CONFIG_MPC10X_BRIDGE=y -CONFIG_FSL_OCP=y -CONFIG_MPC10X_OPENPIC=y -# CONFIG_MPC10X_STORE_GATHERING is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,115200" -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xFF800000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -CONFIG_MTD_IOMEGA8241=y - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_RAM_COUNT=1 -# CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_INITRAMFS_SOURCE="" -CONFIG_LBD=y -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_BLK_DEV_OFFBOARD=y -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -# CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_NVRAM=y -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -# CONFIG_I2C_CHARDEV is not set - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_BLUETOOTH_TTY is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_TEST is not set - -# -# USB ATM/DSL drivers -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_NET2280=y -CONFIG_USB_NET2280=y -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -CONFIG_USB_GADGET_DUALSPEED=y -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -CONFIG_XFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -CONFIG_DEVFS_MOUNT=y -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_RAMFS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS_FS_VERBOSE is not set -# CONFIG_JFFS_PROC_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -# CONFIG_ROOT_NFS is not set -# CONFIG_LOCKD is not set -# CONFIG_LOCKD_V4 is not set -# CONFIG_SUNRPC is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SERIAL_TEXT_DEBUG=y -CONFIG_PPC_OCP=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/packages/linux/linux-storcenter/defconfig-2.6.15.7 b/packages/linux/linux-storcenter/defconfig-2.6.15.7 deleted file mode 100644 index de5e5b80f7..0000000000 --- a/packages/linux/linux-storcenter/defconfig-2.6.15.7 +++ /dev/null @@ -1,1176 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15.7 -# Tue Jan 15 08:24:59 2008 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_LBD=y - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -# CONFIG_ALTIVEC is not set -# CONFIG_TAU is not set -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -CONFIG_IOMEGA8241=y -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -# CONFIG_ADS8272 is not set -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -# CONFIG_MPC834x_SYS is not set -# CONFIG_EV64360 is not set -CONFIG_MPC10X_BRIDGE=y -CONFIG_MPC10X_OPENPIC=y -# CONFIG_MPC10X_STORE_GATHERING is not set -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,115200" -# CONFIG_PM is not set -# CONFIG_SOFTWARE_SUSPEND is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=m -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xFF800000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -# CONFIG_MTD_PLATRAM is not set -CONFIG_MTD_IOMEGA8241=y - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -CONFIG_BLK_DEV_OFFBOARD=y -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -CONFIG_SCSI_SPI_ATTRS=y -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=y -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_QLA24XX is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID6 is not set -# CONFIG_MD_MULTIPATH is not set -# CONFIG_MD_FAULTY is not set -# CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -# CONFIG_SERIAL_8250_SHARE_IRQ is not set -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -CONFIG_8241EMI=y - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -CONFIG_USB_PRINTER=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=y -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=y -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=y - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SERIAL_TEXT_DEBUG=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/packages/linux/linux-storcenter/defconfig-2.6.27.7 b/packages/linux/linux-storcenter/defconfig-2.6.27.7 new file mode 100644 index 0000000000..fd55a9ab87 --- /dev/null +++ b/packages/linux/linux-storcenter/defconfig-2.6.27.7 @@ -0,0 +1,1971 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27.7 +# Fri Dec 5 23:07:35 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +CONFIG_PPC_CHRP=y +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +CONFIG_EMBEDDED6xx=y +# CONFIG_LINKSTATION is not set +CONFIG_STORCENTER=y +# CONFIG_MPC7448HPC2 is not set +# CONFIG_PPC_HOLLY is not set +# CONFIG_PPC_PRPMC2800 is not set +# CONFIG_PPC_C2K is not set +CONFIG_MPC10X_BRIDGE=y +CONFIG_MPC10X_OPENPIC=y +# CONFIG_MPC10X_STORE_GATHERING is not set +CONFIG_PPC_NATIVE=y +# CONFIG_UDBG_RTAS_CONSOLE is not set +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +# CONFIG_MMIO_NVRAM is not set +CONFIG_PPC_MPC106=y +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_ISA is not set +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +# CONFIG_IP_PIMSM_V1 is not set +# CONFIG_IP_PIMSM_V2 is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +# CONFIG_NF_CT_ACCT is not set +# CONFIG_NF_CONNTRACK_MARK is not set +# CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +# CONFIG_NF_CT_PROTO_UDPLITE is not set +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +# CONFIG_NF_CONNTRACK_SANE is not set +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +CONFIG_NETFILTER_XT_MATCH_MAC=m +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +# CONFIG_IP_NF_QUEUE is not set +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_LOG is not set +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_NF_NAT_SNMP_BASIC is not set +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +# CONFIG_NF_CONNTRACK_IPV6 is not set +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_STP=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set +CONFIG_ATALK=m +CONFIG_DEV_APPLETALK=m +CONFIG_IPDDP=m +CONFIG_IPDDP_ENCAP=y +CONFIG_IPDDP_DECAP=y +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +CONFIG_USB_IRDA=m +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_TOSHIBA_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VLSI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_MCS_FIR=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +CONFIG_BT_HCIUSB_SCO=y +# CONFIG_BT_HCIBTUSB is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_MAC80211 is not set +CONFIG_IEEE80211=m +CONFIG_IEEE80211_DEBUG=y +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffc00000 +CONFIG_MTD_PHYSMAP_LEN=0x400000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=8192 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +CONFIG_ATA_OVER_ETH=m +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +CONFIG_PATA_VIA=y +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_MULTIPATH=m +# CONFIG_MD_FAULTY is not set +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_VLAN is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_BRIQ_PANEL is not set +# CONFIG_HVC_RTAS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# Mac SMBus host controller drivers +# +# CONFIG_I2C_HYDRA is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +CONFIG_SENSORS_EEPROM=m +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FONT_8x16=y +CONFIG_SOUND=m +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_PPC=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_USX2Y=m +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=m +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MICROTEK=m + +# +# USB port drivers +# +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +# CONFIG_USB_EZUSB is not set +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=y +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set +CONFIG_USB_LED=m +CONFIG_USB_CYPRESS_CY7C63=m +CONFIG_USB_CYTHERM=m +# CONFIG_USB_PHIDGET is not set +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PPC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="utf8" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=m +CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +CONFIG_NCP_FS=m +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y +# CONFIG_PPC_EARLY_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +# CONFIG_PPC_EARLY_DEBUG_44x is not set +# CONFIG_PPC_EARLY_DEBUG_40x is not set +# CONFIG_PPC_EARLY_DEBUG_CPM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_CRYPTO_DEV_TALITOS is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/packages/linux/linux-storcenter/kernel.patch-2.6.12.6 b/packages/linux/linux-storcenter/kernel.patch-2.6.12.6 deleted file mode 100644 index 094b7e14e9..0000000000 --- a/packages/linux/linux-storcenter/kernel.patch-2.6.12.6 +++ /dev/null @@ -1,9895 +0,0 @@ -diff -urN linux-original/arch/ppc/Kconfig linux/arch/ppc/Kconfig ---- linux-original/arch/ppc/Kconfig 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/Kconfig 2005-07-08 08:55:27.000000000 -0400 -@@ -628,6 +628,15 @@ - End of Life: - - URL: <http://www.windriver.com/> - -+config IOMEGA8241 -+ bool "IOMEGA8241" -+ ---help--- -+ Iomega StorCenter Network Hard Drive -+ Manufacturer: Iomega Corporation -+ Date of Release: May 2005 -+ End of Life: - -+ URL: <http://www.iomega.com/> -+ - config SBS8260 - bool "SBS8260" - -@@ -755,7 +764,7 @@ - depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \ - PRPMC750 || K2 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ -- 83xx -+ 83xx || IOMEGA8241 - default y - - config FORCE -@@ -823,7 +832,7 @@ - - config MPC10X_BRIDGE - bool -- depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT -+ depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT || IOMEGA8241 - default y - - config FSL_OCP -@@ -833,7 +842,7 @@ - - config MPC10X_OPENPIC - bool -- depends on POWERPMC250 || LOPEC || SANDPOINT -+ depends on POWERPMC250 || LOPEC || SANDPOINT || IOMEGA8241 - default y - - config MPC10X_STORE_GATHERING -diff -urN linux-original/arch/ppc/boot/Makefile linux/arch/ppc/boot/Makefile ---- linux-original/arch/ppc/boot/Makefile 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/boot/Makefile 2005-07-08 08:55:27.000000000 -0400 -@@ -13,7 +13,7 @@ - CFLAGS += -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include - HOSTCFLAGS += -Iarch/$(ARCH)/boot/include - --BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd -+BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd uImage - - bootdir-y := simple - bootdir-$(CONFIG_PPC_OF) += openfirmware -diff -urN linux-original/arch/ppc/boot/simple/Makefile linux/arch/ppc/boot/simple/Makefile ---- linux-original/arch/ppc/boot/simple/Makefile 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/boot/simple/Makefile 2005-07-08 08:55:27.000000000 -0400 -@@ -135,6 +135,10 @@ - end-$(CONFIG_SANDPOINT) := sandpoint - cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) - -+ end-$(CONFIG_IOMEGA8241) := iomega8241 -+ cacheflag-$(CONFIG_IOMEGA8241) := -include $(clear_L2_L3) -+ -+ - zimage-$(CONFIG_SPRUCE) := zImage-TREE - zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE - end-$(CONFIG_SPRUCE) := spruce -diff -urN linux-original/arch/ppc/configs/iomega8241_defconfig linux/arch/ppc/configs/iomega8241_defconfig ---- linux-original/arch/ppc/configs/iomega8241_defconfig 1969-12-31 19:00:00.000000000 -0500 -+++ linux/arch/ppc/configs/iomega8241_defconfig 2005-08-08 13:13:35.000000000 -0400 -@@ -0,0 +1,1094 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.12 -+# Mon Jul 18 11:03:36 2005 -+# -+CONFIG_MMU=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_RWSEM_XCHGADD_ALGORITHM=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_HAVE_DEC_LOCK=y -+CONFIG_PPC=y -+CONFIG_PPC32=y -+CONFIG_GENERIC_NVRAM=y -+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_CLEAN_COMPILE=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+CONFIG_SYSCTL=y -+# CONFIG_AUDIT is not set -+CONFIG_HOTPLUG=y -+# CONFIG_KOBJECT_UEVENT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_EMBEDDED=y -+# CONFIG_KALLSYMS is not set -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SHMEM=y -+CONFIG_CC_ALIGN_FUNCTIONS=0 -+CONFIG_CC_ALIGN_LABELS=0 -+CONFIG_CC_ALIGN_LOOPS=0 -+CONFIG_CC_ALIGN_JUMPS=0 -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_OBSOLETE_MODPARM=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# Processor -+# -+CONFIG_6xx=y -+# CONFIG_40x is not set -+# CONFIG_44x is not set -+# CONFIG_POWER3 is not set -+# CONFIG_POWER4 is not set -+# CONFIG_8xx is not set -+# CONFIG_E500 is not set -+CONFIG_PPC_FPU=y -+# CONFIG_ALTIVEC is not set -+# CONFIG_TAU is not set -+# CONFIG_CPU_FREQ is not set -+CONFIG_PPC_GEN550=y -+# CONFIG_PM is not set -+CONFIG_PPC_STD_MMU=y -+ -+# -+# Platform options -+# -+# CONFIG_PPC_MULTIPLATFORM is not set -+# CONFIG_APUS is not set -+# CONFIG_KATANA is not set -+# CONFIG_WILLOW is not set -+# CONFIG_CPCI690 is not set -+# CONFIG_PCORE is not set -+# CONFIG_POWERPMC250 is not set -+# CONFIG_CHESTNUT is not set -+# CONFIG_SPRUCE is not set -+# CONFIG_HDPU is not set -+# CONFIG_EV64260 is not set -+# CONFIG_LOPEC is not set -+# CONFIG_MCPN765 is not set -+# CONFIG_MVME5100 is not set -+# CONFIG_PPLUS is not set -+# CONFIG_PRPMC750 is not set -+# CONFIG_PRPMC800 is not set -+# CONFIG_SANDPOINT is not set -+# CONFIG_RADSTONE_PPC7D is not set -+# CONFIG_ADIR is not set -+# CONFIG_K2 is not set -+# CONFIG_PAL4 is not set -+# CONFIG_GEMINI is not set -+# CONFIG_EST8260 is not set -+# CONFIG_SBC82xx is not set -+CONFIG_IOMEGA8241=y -+# CONFIG_SBS8260 is not set -+# CONFIG_RPX8260 is not set -+# CONFIG_TQM8260 is not set -+# CONFIG_ADS8272 is not set -+# CONFIG_PQ2FADS is not set -+# CONFIG_LITE5200 is not set -+# CONFIG_MPC834x_SYS is not set -+CONFIG_MPC10X_BRIDGE=y -+CONFIG_FSL_OCP=y -+CONFIG_MPC10X_OPENPIC=y -+# CONFIG_MPC10X_STORE_GATHERING is not set -+# CONFIG_SMP is not set -+# CONFIG_PREEMPT is not set -+# CONFIG_HIGHMEM is not set -+CONFIG_BINFMT_ELF=y -+CONFIG_BINFMT_MISC=y -+CONFIG_CMDLINE_BOOL=y -+CONFIG_CMDLINE="console=/dev/ttyS0,115200" -+CONFIG_ISA_DMA_API=y -+ -+# -+# Bus options -+# -+CONFIG_GENERIC_ISA_DMA=y -+CONFIG_PCI=y -+CONFIG_PCI_DOMAINS=y -+# CONFIG_PCI_LEGACY_PROC is not set -+# CONFIG_PCI_NAMES is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Advanced setup -+# -+# CONFIG_ADVANCED_OPTIONS is not set -+ -+# -+# Default settings for advanced configuration options are used -+# -+CONFIG_HIGHMEM_START=0xfe000000 -+CONFIG_LOWMEM_SIZE=0x30000000 -+CONFIG_KERNEL_START=0xc0000000 -+CONFIG_TASK_SIZE=0x80000000 -+CONFIG_BOOT_LOAD=0x00800000 -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+# CONFIG_MTD_CMDLINE_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLOCK=y -+CONFIG_FTL=y -+CONFIG_NFTL=y -+CONFIG_NFTL_RW=y -+# CONFIG_INFTL is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+CONFIG_MTD_CFI_AMDSTD_RETRY=0 -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0xFF800000 -+CONFIG_MTD_PHYSMAP_LEN=0x00800000 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -+CONFIG_MTD_IOMEGA8241=y -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_PMC551 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLKMTD is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+ -+# -+# NAND Flash Device Drivers -+# -+# CONFIG_MTD_NAND is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_FD is not set -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_COW_COMMON is not set -+# CONFIG_BLK_DEV_LOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_SX8 is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=1 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_INITRD is not set -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_LBD=y -+# CONFIG_CDROM_PKTCDVD is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# ATA/ATAPI/MFM/RLL support -+# -+CONFIG_IDE=y -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+CONFIG_IDEDISK_MULTI_MODE=y -+# CONFIG_BLK_DEV_IDECD is not set -+# CONFIG_BLK_DEV_IDETAPE is not set -+# CONFIG_BLK_DEV_IDEFLOPPY is not set -+# CONFIG_BLK_DEV_IDESCSI is not set -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+CONFIG_IDE_GENERIC=y -+CONFIG_BLK_DEV_IDEPCI=y -+# CONFIG_IDEPCI_SHARE_IRQ is not set -+CONFIG_BLK_DEV_OFFBOARD=y -+# CONFIG_BLK_DEV_GENERIC is not set -+# CONFIG_BLK_DEV_OPTI621 is not set -+# CONFIG_BLK_DEV_SL82C105 is not set -+CONFIG_BLK_DEV_IDEDMA_PCI=y -+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -+# CONFIG_IDEDMA_PCI_AUTO is not set -+# CONFIG_BLK_DEV_AEC62XX is not set -+# CONFIG_BLK_DEV_ALI15X3 is not set -+# CONFIG_BLK_DEV_AMD74XX is not set -+# CONFIG_BLK_DEV_CMD64X is not set -+# CONFIG_BLK_DEV_TRIFLEX is not set -+# CONFIG_BLK_DEV_CY82C693 is not set -+# CONFIG_BLK_DEV_CS5520 is not set -+# CONFIG_BLK_DEV_CS5530 is not set -+# CONFIG_BLK_DEV_HPT34X is not set -+# CONFIG_BLK_DEV_HPT366 is not set -+# CONFIG_BLK_DEV_SC1200 is not set -+# CONFIG_BLK_DEV_PIIX is not set -+# CONFIG_BLK_DEV_NS87415 is not set -+# CONFIG_BLK_DEV_PDC202XX_OLD is not set -+# CONFIG_BLK_DEV_PDC202XX_NEW is not set -+# CONFIG_BLK_DEV_SVWKS is not set -+# CONFIG_BLK_DEV_SIIMAGE is not set -+# CONFIG_BLK_DEV_SLC90E66 is not set -+# CONFIG_BLK_DEV_TRM290 is not set -+CONFIG_BLK_DEV_VIA82CXXX=y -+# CONFIG_IDE_ARM is not set -+CONFIG_BLK_DEV_IDEDMA=y -+# CONFIG_IDEDMA_IVB is not set -+# CONFIG_IDEDMA_AUTO is not set -+# CONFIG_BLK_DEV_HD is not set -+ -+# -+# SCSI device support -+# -+CONFIG_SCSI=y -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=y -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+# CONFIG_CHR_DEV_SG is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI Transport Attributes -+# -+CONFIG_SCSI_SPI_ATTRS=y -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -+# CONFIG_SCSI_3W_9XXX is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_MEGARAID_NEWGEN is not set -+# CONFIG_MEGARAID_LEGACY is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_IPS is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_SYM53C8XX_2 is not set -+# CONFIG_SCSI_IPR is not set -+# CONFIG_SCSI_QLOGIC_FC is not set -+# CONFIG_SCSI_QLOGIC_1280 is not set -+CONFIG_SCSI_QLA2XXX=y -+# CONFIG_SCSI_QLA21XX is not set -+# CONFIG_SCSI_QLA22XX is not set -+# CONFIG_SCSI_QLA2300 is not set -+# CONFIG_SCSI_QLA2322 is not set -+# CONFIG_SCSI_QLA6312 is not set -+# CONFIG_SCSI_LPFC is not set -+# CONFIG_SCSI_DC395x is not set -+# CONFIG_SCSI_DC390T is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+# CONFIG_MD is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+# CONFIG_IEEE1394 is not set -+ -+# -+# I2O device support -+# -+# CONFIG_I2O is not set -+ -+# -+# Macintosh device drivers -+# -+ -+# -+# Networking support -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+# CONFIG_IP_PNP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_IP_TCPDIAG is not set -+# CONFIG_IP_TCPDIAG_IPV6 is not set -+# CONFIG_IPV6 is not set -+# CONFIG_NETFILTER is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+# CONFIG_NET_CLS_ROUTE is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+# CONFIG_NET_ETHERNET is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+CONFIG_R8169=y -+# CONFIG_R8169_NAPI is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_BNX2 is not set -+ -+# -+# Ethernet (10000 Mbit) -+# -+# CONFIG_IXGB is not set -+# CONFIG_S2IO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+# CONFIG_NET_RADIO is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_NET_FC is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Telephony Support -+# -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+# CONFIG_INPUT is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+CONFIG_SERIAL_8250=y -+CONFIG_SERIAL_8250_CONSOLE=y -+CONFIG_SERIAL_8250_NR_UARTS=2 -+CONFIG_SERIAL_8250_EXTENDED=y -+CONFIG_SERIAL_8250_MANY_PORTS=y -+# CONFIG_SERIAL_8250_SHARE_IRQ is not set -+# CONFIG_SERIAL_8250_DETECT_IRQ is not set -+# CONFIG_SERIAL_8250_MULTIPORT is not set -+# CONFIG_SERIAL_8250_RSA is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+# CONFIG_SERIAL_JSM is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+# CONFIG_WATCHDOG is not set -+CONFIG_NVRAM=y -+CONFIG_GEN_RTC=y -+# CONFIG_GEN_RTC_X is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_AGP is not set -+# CONFIG_DRM is not set -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+# CONFIG_I2C_CHARDEV is not set -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_ALI1535 is not set -+# CONFIG_I2C_ALI1563 is not set -+# CONFIG_I2C_ALI15X3 is not set -+# CONFIG_I2C_AMD756 is not set -+# CONFIG_I2C_AMD8111 is not set -+# CONFIG_I2C_I801 is not set -+# CONFIG_I2C_I810 is not set -+# CONFIG_I2C_PIIX4 is not set -+# CONFIG_I2C_ISA is not set -+CONFIG_I2C_MPC=y -+# CONFIG_I2C_NFORCE2 is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_PROSAVAGE is not set -+# CONFIG_I2C_SAVAGE4 is not set -+# CONFIG_SCx200_ACB is not set -+# CONFIG_I2C_SIS5595 is not set -+# CONFIG_I2C_SIS630 is not set -+# CONFIG_I2C_SIS96X is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_VIA is not set -+# CONFIG_I2C_VIAPRO is not set -+# CONFIG_I2C_VOODOO3 is not set -+# CONFIG_I2C_PCA_ISA is not set -+ -+# -+# Hardware Sensors Chip support -+# -+CONFIG_I2C_SENSOR=y -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ASB100 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_FSCHER is not set -+# CONFIG_SENSORS_FSCPOS is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_SIS5595 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_VIA686A is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83627HF is not set -+ -+# -+# Other I2C Chip support -+# -+CONFIG_SENSORS_DS1337=y -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_RTC8564 is not set -+# CONFIG_SENSORS_M41T00 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+ -+# -+# Misc devices -+# -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_FB is not set -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+CONFIG_USB_EHCI_HCD=y -+# CONFIG_USB_EHCI_SPLIT_ISO is not set -+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_UHCI_HCD is not set -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_BLUETOOTH_TTY is not set -+# CONFIG_USB_ACM is not set -+CONFIG_USB_PRINTER=y -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+CONFIG_USB_STORAGE_FREECOM=y -+CONFIG_USB_STORAGE_ISD200=y -+CONFIG_USB_STORAGE_DPCM=y -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Multimedia devices -+# -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Video4Linux support is needed for USB Multimedia device support -+# -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGETKIT is not set -+# CONFIG_USB_PHIDGETSERVO is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_SISUSBVGA is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB ATM/DSL drivers -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_NET2280=y -+CONFIG_USB_NET2280=y -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+CONFIG_USB_ETH_RNDIS=y -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+ -+# -+# MMC/SD Card support -+# -+# CONFIG_MMC is not set -+ -+# -+# InfiniBand support -+# -+# CONFIG_INFINIBAND is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT3_FS is not set -+# CONFIG_JBD is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+ -+# -+# XFS support -+# -+# CONFIG_XFS_FS is not set -+# CONFIG_MINIX_FS is not set -+CONFIG_ROMFS_FS=y -+CONFIG_QUOTA=y -+# CONFIG_QFMT_V1 is not set -+CONFIG_QFMT_V2=y -+CONFIG_QUOTACTL=y -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=y -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_NTFS_FS=y -+# CONFIG_NTFS_DEBUG is not set -+# CONFIG_NTFS_RW is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_KCORE=y -+CONFIG_SYSFS=y -+CONFIG_DEVFS_FS=y -+CONFIG_DEVFS_MOUNT=y -+# CONFIG_DEVFS_DEBUG is not set -+# CONFIG_DEVPTS_FS_XATTR is not set -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_XATTR is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS_FS=y -+CONFIG_JFFS_FS_VERBOSE=0 -+CONFIG_JFFS_PROC_FS=y -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+# CONFIG_JFFS2_FS_NAND is not set -+# CONFIG_JFFS2_FS_NOR_ECC is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_NFS_FS is not set -+# CONFIG_NFSD is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+ -+# -+# Library routines -+# -+# CONFIG_CRC_CCITT is not set -+CONFIG_CRC32=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+# CONFIG_DEBUG_KERNEL is not set -+CONFIG_LOG_BUF_SHIFT=14 -+CONFIG_SERIAL_TEXT_DEBUG=y -+CONFIG_PPC_OCP=y -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Hardware crypto devices -+# -diff -urN linux-original/arch/ppc/configs/iomega8241m_defconfig linux/arch/ppc/configs/iomega8241m_defconfig ---- linux-original/arch/ppc/configs/iomega8241m_defconfig 1969-12-31 19:00:00.000000000 -0500 -+++ linux/arch/ppc/configs/iomega8241m_defconfig 2005-08-18 09:46:48.000000000 -0400 -@@ -0,0 +1,1104 @@ -+# -+# Automatically generated make config: don't edit -+# Linux kernel version: 2.6.12 -+# Mon Aug 15 10:22:39 2005 -+# -+CONFIG_MMU=y -+CONFIG_GENERIC_HARDIRQS=y -+CONFIG_RWSEM_XCHGADD_ALGORITHM=y -+CONFIG_GENERIC_CALIBRATE_DELAY=y -+CONFIG_HAVE_DEC_LOCK=y -+CONFIG_PPC=y -+CONFIG_PPC32=y -+CONFIG_GENERIC_NVRAM=y -+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -+ -+# -+# Code maturity level options -+# -+CONFIG_EXPERIMENTAL=y -+CONFIG_CLEAN_COMPILE=y -+CONFIG_BROKEN_ON_SMP=y -+CONFIG_INIT_ENV_ARG_LIMIT=32 -+ -+# -+# General setup -+# -+CONFIG_LOCALVERSION="" -+CONFIG_SWAP=y -+CONFIG_SYSVIPC=y -+CONFIG_POSIX_MQUEUE=y -+# CONFIG_BSD_PROCESS_ACCT is not set -+CONFIG_SYSCTL=y -+# CONFIG_AUDIT is not set -+CONFIG_HOTPLUG=y -+# CONFIG_KOBJECT_UEVENT is not set -+# CONFIG_IKCONFIG is not set -+CONFIG_EMBEDDED=y -+# CONFIG_KALLSYMS is not set -+CONFIG_PRINTK=y -+CONFIG_BUG=y -+CONFIG_BASE_FULL=y -+CONFIG_FUTEX=y -+CONFIG_EPOLL=y -+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -+CONFIG_SHMEM=y -+CONFIG_CC_ALIGN_FUNCTIONS=0 -+CONFIG_CC_ALIGN_LABELS=0 -+CONFIG_CC_ALIGN_LOOPS=0 -+CONFIG_CC_ALIGN_JUMPS=0 -+# CONFIG_TINY_SHMEM is not set -+CONFIG_BASE_SMALL=0 -+ -+# -+# Loadable module support -+# -+CONFIG_MODULES=y -+CONFIG_MODULE_UNLOAD=y -+# CONFIG_MODULE_FORCE_UNLOAD is not set -+CONFIG_OBSOLETE_MODPARM=y -+# CONFIG_MODVERSIONS is not set -+# CONFIG_MODULE_SRCVERSION_ALL is not set -+CONFIG_KMOD=y -+ -+# -+# Processor -+# -+CONFIG_6xx=y -+# CONFIG_40x is not set -+# CONFIG_44x is not set -+# CONFIG_POWER3 is not set -+# CONFIG_POWER4 is not set -+# CONFIG_8xx is not set -+# CONFIG_E500 is not set -+CONFIG_PPC_FPU=y -+# CONFIG_ALTIVEC is not set -+# CONFIG_TAU is not set -+# CONFIG_CPU_FREQ is not set -+CONFIG_PPC_GEN550=y -+# CONFIG_PM is not set -+CONFIG_PPC_STD_MMU=y -+ -+# -+# Platform options -+# -+# CONFIG_PPC_MULTIPLATFORM is not set -+# CONFIG_APUS is not set -+# CONFIG_KATANA is not set -+# CONFIG_WILLOW is not set -+# CONFIG_CPCI690 is not set -+# CONFIG_PCORE is not set -+# CONFIG_POWERPMC250 is not set -+# CONFIG_CHESTNUT is not set -+# CONFIG_SPRUCE is not set -+# CONFIG_HDPU is not set -+# CONFIG_EV64260 is not set -+# CONFIG_LOPEC is not set -+# CONFIG_MCPN765 is not set -+# CONFIG_MVME5100 is not set -+# CONFIG_PPLUS is not set -+# CONFIG_PRPMC750 is not set -+# CONFIG_PRPMC800 is not set -+# CONFIG_SANDPOINT is not set -+# CONFIG_RADSTONE_PPC7D is not set -+# CONFIG_ADIR is not set -+# CONFIG_K2 is not set -+# CONFIG_PAL4 is not set -+# CONFIG_GEMINI is not set -+# CONFIG_EST8260 is not set -+# CONFIG_SBC82xx is not set -+CONFIG_IOMEGA8241=y -+# CONFIG_SBS8260 is not set -+# CONFIG_RPX8260 is not set -+# CONFIG_TQM8260 is not set -+# CONFIG_ADS8272 is not set -+# CONFIG_PQ2FADS is not set -+# CONFIG_LITE5200 is not set -+# CONFIG_MPC834x_SYS is not set -+CONFIG_MPC10X_BRIDGE=y -+CONFIG_FSL_OCP=y -+CONFIG_MPC10X_OPENPIC=y -+# CONFIG_MPC10X_STORE_GATHERING is not set -+# CONFIG_SMP is not set -+# CONFIG_PREEMPT is not set -+# CONFIG_HIGHMEM is not set -+CONFIG_BINFMT_ELF=y -+CONFIG_BINFMT_MISC=y -+CONFIG_CMDLINE_BOOL=y -+CONFIG_CMDLINE="console=/dev/ttyS0,115200" -+CONFIG_ISA_DMA_API=y -+ -+# -+# Bus options -+# -+CONFIG_GENERIC_ISA_DMA=y -+CONFIG_PCI=y -+CONFIG_PCI_DOMAINS=y -+# CONFIG_PCI_LEGACY_PROC is not set -+# CONFIG_PCI_NAMES is not set -+ -+# -+# PCCARD (PCMCIA/CardBus) support -+# -+# CONFIG_PCCARD is not set -+ -+# -+# Advanced setup -+# -+# CONFIG_ADVANCED_OPTIONS is not set -+ -+# -+# Default settings for advanced configuration options are used -+# -+CONFIG_HIGHMEM_START=0xfe000000 -+CONFIG_LOWMEM_SIZE=0x30000000 -+CONFIG_KERNEL_START=0xc0000000 -+CONFIG_TASK_SIZE=0x80000000 -+CONFIG_BOOT_LOAD=0x00800000 -+ -+# -+# Device Drivers -+# -+ -+# -+# Generic Driver Options -+# -+CONFIG_STANDALONE=y -+CONFIG_PREVENT_FIRMWARE_BUILD=y -+# CONFIG_FW_LOADER is not set -+ -+# -+# Memory Technology Devices (MTD) -+# -+CONFIG_MTD=y -+# CONFIG_MTD_DEBUG is not set -+# CONFIG_MTD_CONCAT is not set -+CONFIG_MTD_PARTITIONS=y -+# CONFIG_MTD_REDBOOT_PARTS is not set -+# CONFIG_MTD_CMDLINE_PARTS is not set -+ -+# -+# User Modules And Translation Layers -+# -+CONFIG_MTD_CHAR=y -+CONFIG_MTD_BLOCK=y -+CONFIG_FTL=y -+CONFIG_NFTL=y -+CONFIG_NFTL_RW=y -+# CONFIG_INFTL is not set -+ -+# -+# RAM/ROM/Flash chip drivers -+# -+CONFIG_MTD_CFI=y -+# CONFIG_MTD_JEDECPROBE is not set -+CONFIG_MTD_GEN_PROBE=y -+# CONFIG_MTD_CFI_ADV_OPTIONS is not set -+CONFIG_MTD_MAP_BANK_WIDTH_1=y -+CONFIG_MTD_MAP_BANK_WIDTH_2=y -+CONFIG_MTD_MAP_BANK_WIDTH_4=y -+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -+CONFIG_MTD_CFI_I1=y -+CONFIG_MTD_CFI_I2=y -+# CONFIG_MTD_CFI_I4 is not set -+# CONFIG_MTD_CFI_I8 is not set -+# CONFIG_MTD_CFI_INTELEXT is not set -+CONFIG_MTD_CFI_AMDSTD=y -+CONFIG_MTD_CFI_AMDSTD_RETRY=0 -+# CONFIG_MTD_CFI_STAA is not set -+CONFIG_MTD_CFI_UTIL=y -+# CONFIG_MTD_RAM is not set -+# CONFIG_MTD_ROM is not set -+# CONFIG_MTD_ABSENT is not set -+ -+# -+# Mapping drivers for chip access -+# -+# CONFIG_MTD_COMPLEX_MAPPINGS is not set -+CONFIG_MTD_PHYSMAP=y -+CONFIG_MTD_PHYSMAP_START=0xFF800000 -+CONFIG_MTD_PHYSMAP_LEN=0x00800000 -+CONFIG_MTD_PHYSMAP_BANKWIDTH=1 -+CONFIG_MTD_IOMEGA8241=y -+ -+# -+# Self-contained MTD device drivers -+# -+# CONFIG_MTD_PMC551 is not set -+# CONFIG_MTD_SLRAM is not set -+# CONFIG_MTD_PHRAM is not set -+# CONFIG_MTD_MTDRAM is not set -+# CONFIG_MTD_BLKMTD is not set -+# CONFIG_MTD_BLOCK2MTD is not set -+ -+# -+# Disk-On-Chip Device Drivers -+# -+# CONFIG_MTD_DOC2000 is not set -+# CONFIG_MTD_DOC2001 is not set -+# CONFIG_MTD_DOC2001PLUS is not set -+ -+# -+# NAND Flash Device Drivers -+# -+# CONFIG_MTD_NAND is not set -+ -+# -+# Parallel port support -+# -+# CONFIG_PARPORT is not set -+ -+# -+# Plug and Play support -+# -+ -+# -+# Block devices -+# -+# CONFIG_BLK_DEV_FD is not set -+# CONFIG_BLK_CPQ_DA is not set -+# CONFIG_BLK_CPQ_CISS_DA is not set -+# CONFIG_BLK_DEV_DAC960 is not set -+# CONFIG_BLK_DEV_UMEM is not set -+# CONFIG_BLK_DEV_COW_COMMON is not set -+# CONFIG_BLK_DEV_LOOP is not set -+# CONFIG_BLK_DEV_NBD is not set -+# CONFIG_BLK_DEV_SX8 is not set -+# CONFIG_BLK_DEV_UB is not set -+CONFIG_BLK_DEV_RAM=y -+CONFIG_BLK_DEV_RAM_COUNT=1 -+CONFIG_BLK_DEV_RAM_SIZE=4096 -+# CONFIG_BLK_DEV_INITRD is not set -+CONFIG_INITRAMFS_SOURCE="" -+CONFIG_LBD=y -+# CONFIG_CDROM_PKTCDVD is not set -+ -+# -+# IO Schedulers -+# -+CONFIG_IOSCHED_NOOP=y -+CONFIG_IOSCHED_AS=y -+CONFIG_IOSCHED_DEADLINE=y -+CONFIG_IOSCHED_CFQ=y -+# CONFIG_ATA_OVER_ETH is not set -+ -+# -+# ATA/ATAPI/MFM/RLL support -+# -+CONFIG_IDE=y -+CONFIG_BLK_DEV_IDE=y -+ -+# -+# Please see Documentation/ide.txt for help/info on IDE drives -+# -+# CONFIG_BLK_DEV_IDE_SATA is not set -+CONFIG_BLK_DEV_IDEDISK=y -+CONFIG_IDEDISK_MULTI_MODE=y -+# CONFIG_BLK_DEV_IDECD is not set -+# CONFIG_BLK_DEV_IDETAPE is not set -+# CONFIG_BLK_DEV_IDEFLOPPY is not set -+# CONFIG_BLK_DEV_IDESCSI is not set -+# CONFIG_IDE_TASK_IOCTL is not set -+ -+# -+# IDE chipset support/bugfixes -+# -+CONFIG_IDE_GENERIC=y -+CONFIG_BLK_DEV_IDEPCI=y -+# CONFIG_IDEPCI_SHARE_IRQ is not set -+CONFIG_BLK_DEV_OFFBOARD=y -+# CONFIG_BLK_DEV_GENERIC is not set -+# CONFIG_BLK_DEV_OPTI621 is not set -+# CONFIG_BLK_DEV_SL82C105 is not set -+CONFIG_BLK_DEV_IDEDMA_PCI=y -+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -+# CONFIG_IDEDMA_PCI_AUTO is not set -+# CONFIG_BLK_DEV_AEC62XX is not set -+# CONFIG_BLK_DEV_ALI15X3 is not set -+# CONFIG_BLK_DEV_AMD74XX is not set -+# CONFIG_BLK_DEV_CMD64X is not set -+# CONFIG_BLK_DEV_TRIFLEX is not set -+# CONFIG_BLK_DEV_CY82C693 is not set -+# CONFIG_BLK_DEV_CS5520 is not set -+# CONFIG_BLK_DEV_CS5530 is not set -+# CONFIG_BLK_DEV_HPT34X is not set -+# CONFIG_BLK_DEV_HPT366 is not set -+# CONFIG_BLK_DEV_SC1200 is not set -+# CONFIG_BLK_DEV_PIIX is not set -+# CONFIG_BLK_DEV_NS87415 is not set -+# CONFIG_BLK_DEV_PDC202XX_OLD is not set -+# CONFIG_BLK_DEV_PDC202XX_NEW is not set -+# CONFIG_BLK_DEV_SVWKS is not set -+# CONFIG_BLK_DEV_SIIMAGE is not set -+# CONFIG_BLK_DEV_SLC90E66 is not set -+# CONFIG_BLK_DEV_TRM290 is not set -+CONFIG_BLK_DEV_VIA82CXXX=y -+# CONFIG_IDE_ARM is not set -+CONFIG_BLK_DEV_IDEDMA=y -+# CONFIG_IDEDMA_IVB is not set -+# CONFIG_IDEDMA_AUTO is not set -+# CONFIG_BLK_DEV_HD is not set -+ -+# -+# SCSI device support -+# -+CONFIG_SCSI=y -+CONFIG_SCSI_PROC_FS=y -+ -+# -+# SCSI support type (disk, tape, CD-ROM) -+# -+CONFIG_BLK_DEV_SD=y -+# CONFIG_CHR_DEV_ST is not set -+# CONFIG_CHR_DEV_OSST is not set -+CONFIG_BLK_DEV_SR=y -+# CONFIG_BLK_DEV_SR_VENDOR is not set -+# CONFIG_CHR_DEV_SG is not set -+ -+# -+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -+# -+# CONFIG_SCSI_MULTI_LUN is not set -+# CONFIG_SCSI_CONSTANTS is not set -+# CONFIG_SCSI_LOGGING is not set -+ -+# -+# SCSI Transport Attributes -+# -+CONFIG_SCSI_SPI_ATTRS=y -+# CONFIG_SCSI_FC_ATTRS is not set -+# CONFIG_SCSI_ISCSI_ATTRS is not set -+ -+# -+# SCSI low-level drivers -+# -+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -+# CONFIG_SCSI_3W_9XXX is not set -+# CONFIG_SCSI_ACARD is not set -+# CONFIG_SCSI_AACRAID is not set -+# CONFIG_SCSI_AIC7XXX is not set -+# CONFIG_SCSI_AIC7XXX_OLD is not set -+# CONFIG_SCSI_AIC79XX is not set -+# CONFIG_SCSI_DPT_I2O is not set -+# CONFIG_MEGARAID_NEWGEN is not set -+# CONFIG_MEGARAID_LEGACY is not set -+# CONFIG_SCSI_SATA is not set -+# CONFIG_SCSI_BUSLOGIC is not set -+# CONFIG_SCSI_DMX3191D is not set -+# CONFIG_SCSI_EATA is not set -+# CONFIG_SCSI_FUTURE_DOMAIN is not set -+# CONFIG_SCSI_GDTH is not set -+# CONFIG_SCSI_IPS is not set -+# CONFIG_SCSI_INITIO is not set -+# CONFIG_SCSI_INIA100 is not set -+# CONFIG_SCSI_SYM53C8XX_2 is not set -+# CONFIG_SCSI_IPR is not set -+# CONFIG_SCSI_QLOGIC_FC is not set -+# CONFIG_SCSI_QLOGIC_1280 is not set -+CONFIG_SCSI_QLA2XXX=y -+# CONFIG_SCSI_QLA21XX is not set -+# CONFIG_SCSI_QLA22XX is not set -+# CONFIG_SCSI_QLA2300 is not set -+# CONFIG_SCSI_QLA2322 is not set -+# CONFIG_SCSI_QLA6312 is not set -+# CONFIG_SCSI_LPFC is not set -+# CONFIG_SCSI_DC395x is not set -+# CONFIG_SCSI_DC390T is not set -+# CONFIG_SCSI_NSP32 is not set -+# CONFIG_SCSI_DEBUG is not set -+ -+# -+# Multi-device support (RAID and LVM) -+# -+CONFIG_MD=y -+CONFIG_BLK_DEV_MD=y -+CONFIG_MD_LINEAR=y -+CONFIG_MD_RAID0=y -+CONFIG_MD_RAID1=y -+# CONFIG_MD_RAID10 is not set -+CONFIG_MD_RAID5=y -+# CONFIG_MD_RAID6 is not set -+# CONFIG_MD_MULTIPATH is not set -+# CONFIG_MD_FAULTY is not set -+# CONFIG_BLK_DEV_DM is not set -+ -+# -+# Fusion MPT device support -+# -+# CONFIG_FUSION is not set -+ -+# -+# IEEE 1394 (FireWire) support -+# -+# CONFIG_IEEE1394 is not set -+ -+# -+# I2O device support -+# -+# CONFIG_I2O is not set -+ -+# -+# Macintosh device drivers -+# -+ -+# -+# Networking support -+# -+CONFIG_NET=y -+ -+# -+# Networking options -+# -+CONFIG_PACKET=y -+# CONFIG_PACKET_MMAP is not set -+CONFIG_UNIX=y -+# CONFIG_NET_KEY is not set -+CONFIG_INET=y -+CONFIG_IP_MULTICAST=y -+# CONFIG_IP_ADVANCED_ROUTER is not set -+# CONFIG_IP_PNP is not set -+# CONFIG_NET_IPIP is not set -+# CONFIG_NET_IPGRE is not set -+# CONFIG_IP_MROUTE is not set -+# CONFIG_ARPD is not set -+# CONFIG_SYN_COOKIES is not set -+# CONFIG_INET_AH is not set -+# CONFIG_INET_ESP is not set -+# CONFIG_INET_IPCOMP is not set -+# CONFIG_INET_TUNNEL is not set -+# CONFIG_IP_TCPDIAG is not set -+# CONFIG_IP_TCPDIAG_IPV6 is not set -+# CONFIG_IPV6 is not set -+# CONFIG_NETFILTER is not set -+ -+# -+# SCTP Configuration (EXPERIMENTAL) -+# -+# CONFIG_IP_SCTP is not set -+# CONFIG_ATM is not set -+# CONFIG_BRIDGE is not set -+# CONFIG_VLAN_8021Q is not set -+# CONFIG_DECNET is not set -+# CONFIG_LLC2 is not set -+# CONFIG_IPX is not set -+# CONFIG_ATALK is not set -+# CONFIG_X25 is not set -+# CONFIG_LAPB is not set -+# CONFIG_NET_DIVERT is not set -+# CONFIG_ECONET is not set -+# CONFIG_WAN_ROUTER is not set -+ -+# -+# QoS and/or fair queueing -+# -+# CONFIG_NET_SCHED is not set -+# CONFIG_NET_CLS_ROUTE is not set -+ -+# -+# Network testing -+# -+# CONFIG_NET_PKTGEN is not set -+# CONFIG_NETPOLL is not set -+# CONFIG_NET_POLL_CONTROLLER is not set -+# CONFIG_HAMRADIO is not set -+# CONFIG_IRDA is not set -+# CONFIG_BT is not set -+CONFIG_NETDEVICES=y -+# CONFIG_DUMMY is not set -+# CONFIG_BONDING is not set -+# CONFIG_EQUALIZER is not set -+# CONFIG_TUN is not set -+ -+# -+# ARCnet devices -+# -+# CONFIG_ARCNET is not set -+ -+# -+# Ethernet (10 or 100Mbit) -+# -+# CONFIG_NET_ETHERNET is not set -+ -+# -+# Ethernet (1000 Mbit) -+# -+# CONFIG_ACENIC is not set -+# CONFIG_DL2K is not set -+# CONFIG_E1000 is not set -+# CONFIG_NS83820 is not set -+# CONFIG_HAMACHI is not set -+# CONFIG_YELLOWFIN is not set -+CONFIG_R8169=y -+# CONFIG_R8169_NAPI is not set -+# CONFIG_SK98LIN is not set -+# CONFIG_TIGON3 is not set -+# CONFIG_BNX2 is not set -+ -+# -+# Ethernet (10000 Mbit) -+# -+# CONFIG_IXGB is not set -+# CONFIG_S2IO is not set -+ -+# -+# Token Ring devices -+# -+# CONFIG_TR is not set -+ -+# -+# Wireless LAN (non-hamradio) -+# -+# CONFIG_NET_RADIO is not set -+ -+# -+# Wan interfaces -+# -+# CONFIG_WAN is not set -+# CONFIG_FDDI is not set -+# CONFIG_HIPPI is not set -+# CONFIG_PPP is not set -+# CONFIG_SLIP is not set -+# CONFIG_NET_FC is not set -+# CONFIG_SHAPER is not set -+# CONFIG_NETCONSOLE is not set -+ -+# -+# ISDN subsystem -+# -+# CONFIG_ISDN is not set -+ -+# -+# Telephony Support -+# -+# CONFIG_PHONE is not set -+ -+# -+# Input device support -+# -+# CONFIG_INPUT is not set -+ -+# -+# Hardware I/O ports -+# -+# CONFIG_SERIO is not set -+# CONFIG_GAMEPORT is not set -+ -+# -+# Character devices -+# -+# CONFIG_VT is not set -+# CONFIG_SERIAL_NONSTANDARD is not set -+ -+# -+# Serial drivers -+# -+CONFIG_SERIAL_8250=y -+CONFIG_SERIAL_8250_CONSOLE=y -+CONFIG_SERIAL_8250_NR_UARTS=2 -+CONFIG_SERIAL_8250_EXTENDED=y -+CONFIG_SERIAL_8250_MANY_PORTS=y -+# CONFIG_SERIAL_8250_SHARE_IRQ is not set -+# CONFIG_SERIAL_8250_DETECT_IRQ is not set -+# CONFIG_SERIAL_8250_MULTIPORT is not set -+# CONFIG_SERIAL_8250_RSA is not set -+ -+# -+# Non-8250 serial port support -+# -+CONFIG_SERIAL_CORE=y -+CONFIG_SERIAL_CORE_CONSOLE=y -+# CONFIG_SERIAL_JSM is not set -+CONFIG_UNIX98_PTYS=y -+CONFIG_LEGACY_PTYS=y -+CONFIG_LEGACY_PTY_COUNT=256 -+ -+# -+# IPMI -+# -+# CONFIG_IPMI_HANDLER is not set -+ -+# -+# Watchdog Cards -+# -+# CONFIG_WATCHDOG is not set -+CONFIG_NVRAM=y -+CONFIG_GEN_RTC=y -+# CONFIG_GEN_RTC_X is not set -+# CONFIG_DTLK is not set -+# CONFIG_R3964 is not set -+# CONFIG_APPLICOM is not set -+ -+# -+# Ftape, the floppy tape device driver -+# -+# CONFIG_AGP is not set -+# CONFIG_DRM is not set -+# CONFIG_RAW_DRIVER is not set -+ -+# -+# TPM devices -+# -+# CONFIG_TCG_TPM is not set -+ -+# -+# I2C support -+# -+CONFIG_I2C=y -+# CONFIG_I2C_CHARDEV is not set -+ -+# -+# I2C Algorithms -+# -+# CONFIG_I2C_ALGOBIT is not set -+# CONFIG_I2C_ALGOPCF is not set -+# CONFIG_I2C_ALGOPCA is not set -+ -+# -+# I2C Hardware Bus support -+# -+# CONFIG_I2C_ALI1535 is not set -+# CONFIG_I2C_ALI1563 is not set -+# CONFIG_I2C_ALI15X3 is not set -+# CONFIG_I2C_AMD756 is not set -+# CONFIG_I2C_AMD8111 is not set -+# CONFIG_I2C_I801 is not set -+# CONFIG_I2C_I810 is not set -+# CONFIG_I2C_PIIX4 is not set -+# CONFIG_I2C_ISA is not set -+CONFIG_I2C_MPC=y -+# CONFIG_I2C_NFORCE2 is not set -+# CONFIG_I2C_PARPORT_LIGHT is not set -+# CONFIG_I2C_PROSAVAGE is not set -+# CONFIG_I2C_SAVAGE4 is not set -+# CONFIG_SCx200_ACB is not set -+# CONFIG_I2C_SIS5595 is not set -+# CONFIG_I2C_SIS630 is not set -+# CONFIG_I2C_SIS96X is not set -+# CONFIG_I2C_STUB is not set -+# CONFIG_I2C_VIA is not set -+# CONFIG_I2C_VIAPRO is not set -+# CONFIG_I2C_VOODOO3 is not set -+# CONFIG_I2C_PCA_ISA is not set -+ -+# -+# Hardware Sensors Chip support -+# -+CONFIG_I2C_SENSOR=y -+# CONFIG_SENSORS_ADM1021 is not set -+# CONFIG_SENSORS_ADM1025 is not set -+# CONFIG_SENSORS_ADM1026 is not set -+# CONFIG_SENSORS_ADM1031 is not set -+# CONFIG_SENSORS_ASB100 is not set -+# CONFIG_SENSORS_DS1621 is not set -+# CONFIG_SENSORS_FSCHER is not set -+# CONFIG_SENSORS_FSCPOS is not set -+# CONFIG_SENSORS_GL518SM is not set -+# CONFIG_SENSORS_GL520SM is not set -+# CONFIG_SENSORS_IT87 is not set -+# CONFIG_SENSORS_LM63 is not set -+# CONFIG_SENSORS_LM75 is not set -+# CONFIG_SENSORS_LM77 is not set -+# CONFIG_SENSORS_LM78 is not set -+# CONFIG_SENSORS_LM80 is not set -+# CONFIG_SENSORS_LM83 is not set -+# CONFIG_SENSORS_LM85 is not set -+# CONFIG_SENSORS_LM87 is not set -+# CONFIG_SENSORS_LM90 is not set -+# CONFIG_SENSORS_LM92 is not set -+# CONFIG_SENSORS_MAX1619 is not set -+# CONFIG_SENSORS_PC87360 is not set -+# CONFIG_SENSORS_SMSC47B397 is not set -+# CONFIG_SENSORS_SIS5595 is not set -+# CONFIG_SENSORS_SMSC47M1 is not set -+# CONFIG_SENSORS_VIA686A is not set -+# CONFIG_SENSORS_W83781D is not set -+# CONFIG_SENSORS_W83L785TS is not set -+# CONFIG_SENSORS_W83627HF is not set -+ -+# -+# Other I2C Chip support -+# -+CONFIG_SENSORS_DS1337=y -+# CONFIG_SENSORS_EEPROM is not set -+# CONFIG_SENSORS_PCF8574 is not set -+# CONFIG_SENSORS_PCF8591 is not set -+# CONFIG_SENSORS_RTC8564 is not set -+# CONFIG_SENSORS_M41T00 is not set -+# CONFIG_I2C_DEBUG_CORE is not set -+# CONFIG_I2C_DEBUG_ALGO is not set -+# CONFIG_I2C_DEBUG_BUS is not set -+# CONFIG_I2C_DEBUG_CHIP is not set -+ -+# -+# Dallas's 1-wire bus -+# -+# CONFIG_W1 is not set -+ -+# -+# Misc devices -+# -+ -+# -+# Multimedia devices -+# -+# CONFIG_VIDEO_DEV is not set -+ -+# -+# Digital Video Broadcasting Devices -+# -+# CONFIG_DVB is not set -+ -+# -+# Graphics support -+# -+# CONFIG_FB is not set -+ -+# -+# Sound -+# -+# CONFIG_SOUND is not set -+ -+# -+# USB support -+# -+CONFIG_USB_ARCH_HAS_HCD=y -+CONFIG_USB_ARCH_HAS_OHCI=y -+CONFIG_USB=y -+# CONFIG_USB_DEBUG is not set -+ -+# -+# Miscellaneous USB options -+# -+CONFIG_USB_DEVICEFS=y -+# CONFIG_USB_BANDWIDTH is not set -+# CONFIG_USB_DYNAMIC_MINORS is not set -+# CONFIG_USB_OTG is not set -+ -+# -+# USB Host Controller Drivers -+# -+CONFIG_USB_EHCI_HCD=y -+# CONFIG_USB_EHCI_SPLIT_ISO is not set -+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -+CONFIG_USB_OHCI_HCD=y -+# CONFIG_USB_OHCI_BIG_ENDIAN is not set -+CONFIG_USB_OHCI_LITTLE_ENDIAN=y -+# CONFIG_USB_UHCI_HCD is not set -+# CONFIG_USB_SL811_HCD is not set -+ -+# -+# USB Device Class drivers -+# -+# CONFIG_USB_BLUETOOTH_TTY is not set -+# CONFIG_USB_ACM is not set -+CONFIG_USB_PRINTER=y -+ -+# -+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -+# -+CONFIG_USB_STORAGE=y -+# CONFIG_USB_STORAGE_DEBUG is not set -+# CONFIG_USB_STORAGE_DATAFAB is not set -+CONFIG_USB_STORAGE_FREECOM=y -+CONFIG_USB_STORAGE_ISD200=y -+CONFIG_USB_STORAGE_DPCM=y -+# CONFIG_USB_STORAGE_USBAT is not set -+# CONFIG_USB_STORAGE_SDDR09 is not set -+# CONFIG_USB_STORAGE_SDDR55 is not set -+# CONFIG_USB_STORAGE_JUMPSHOT is not set -+ -+# -+# USB Input Devices -+# -+# CONFIG_USB_HID is not set -+ -+# -+# USB HID Boot Protocol drivers -+# -+ -+# -+# USB Imaging devices -+# -+# CONFIG_USB_MDC800 is not set -+# CONFIG_USB_MICROTEK is not set -+ -+# -+# USB Multimedia devices -+# -+# CONFIG_USB_DABUSB is not set -+ -+# -+# Video4Linux support is needed for USB Multimedia device support -+# -+ -+# -+# USB Network Adapters -+# -+# CONFIG_USB_CATC is not set -+# CONFIG_USB_KAWETH is not set -+# CONFIG_USB_PEGASUS is not set -+# CONFIG_USB_RTL8150 is not set -+# CONFIG_USB_USBNET is not set -+# CONFIG_USB_MON is not set -+ -+# -+# USB port drivers -+# -+ -+# -+# USB Serial Converter support -+# -+# CONFIG_USB_SERIAL is not set -+ -+# -+# USB Miscellaneous drivers -+# -+# CONFIG_USB_EMI62 is not set -+# CONFIG_USB_EMI26 is not set -+# CONFIG_USB_AUERSWALD is not set -+# CONFIG_USB_RIO500 is not set -+# CONFIG_USB_LEGOTOWER is not set -+# CONFIG_USB_LCD is not set -+# CONFIG_USB_LED is not set -+# CONFIG_USB_CYTHERM is not set -+# CONFIG_USB_PHIDGETKIT is not set -+# CONFIG_USB_PHIDGETSERVO is not set -+# CONFIG_USB_IDMOUSE is not set -+# CONFIG_USB_SISUSBVGA is not set -+# CONFIG_USB_TEST is not set -+ -+# -+# USB ATM/DSL drivers -+# -+ -+# -+# USB Gadget Support -+# -+CONFIG_USB_GADGET=y -+# CONFIG_USB_GADGET_DEBUG_FILES is not set -+CONFIG_USB_GADGET_NET2280=y -+CONFIG_USB_NET2280=y -+# CONFIG_USB_GADGET_PXA2XX is not set -+# CONFIG_USB_GADGET_GOKU is not set -+# CONFIG_USB_GADGET_LH7A40X is not set -+# CONFIG_USB_GADGET_OMAP is not set -+# CONFIG_USB_GADGET_DUMMY_HCD is not set -+CONFIG_USB_GADGET_DUALSPEED=y -+# CONFIG_USB_ZERO is not set -+CONFIG_USB_ETH=y -+CONFIG_USB_ETH_RNDIS=y -+# CONFIG_USB_GADGETFS is not set -+# CONFIG_USB_FILE_STORAGE is not set -+# CONFIG_USB_G_SERIAL is not set -+ -+# -+# MMC/SD Card support -+# -+# CONFIG_MMC is not set -+ -+# -+# InfiniBand support -+# -+# CONFIG_INFINIBAND is not set -+ -+# -+# File systems -+# -+CONFIG_EXT2_FS=y -+# CONFIG_EXT2_FS_XATTR is not set -+# CONFIG_EXT3_FS is not set -+# CONFIG_JBD is not set -+# CONFIG_REISERFS_FS is not set -+# CONFIG_JFS_FS is not set -+ -+# -+# XFS support -+# -+# CONFIG_XFS_FS is not set -+# CONFIG_MINIX_FS is not set -+CONFIG_ROMFS_FS=y -+CONFIG_QUOTA=y -+# CONFIG_QFMT_V1 is not set -+CONFIG_QFMT_V2=y -+CONFIG_QUOTACTL=y -+CONFIG_DNOTIFY=y -+# CONFIG_AUTOFS_FS is not set -+# CONFIG_AUTOFS4_FS is not set -+ -+# -+# CD-ROM/DVD Filesystems -+# -+CONFIG_ISO9660_FS=y -+CONFIG_JOLIET=y -+# CONFIG_ZISOFS is not set -+# CONFIG_UDF_FS is not set -+ -+# -+# DOS/FAT/NT Filesystems -+# -+CONFIG_FAT_FS=y -+CONFIG_MSDOS_FS=y -+CONFIG_VFAT_FS=y -+CONFIG_FAT_DEFAULT_CODEPAGE=437 -+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -+CONFIG_NTFS_FS=y -+# CONFIG_NTFS_DEBUG is not set -+# CONFIG_NTFS_RW is not set -+ -+# -+# Pseudo filesystems -+# -+CONFIG_PROC_FS=y -+CONFIG_PROC_KCORE=y -+CONFIG_SYSFS=y -+CONFIG_DEVFS_FS=y -+CONFIG_DEVFS_MOUNT=y -+# CONFIG_DEVFS_DEBUG is not set -+# CONFIG_DEVPTS_FS_XATTR is not set -+CONFIG_TMPFS=y -+# CONFIG_TMPFS_XATTR is not set -+# CONFIG_HUGETLB_PAGE is not set -+CONFIG_RAMFS=y -+ -+# -+# Miscellaneous filesystems -+# -+# CONFIG_ADFS_FS is not set -+# CONFIG_AFFS_FS is not set -+# CONFIG_HFS_FS is not set -+# CONFIG_HFSPLUS_FS is not set -+# CONFIG_BEFS_FS is not set -+# CONFIG_BFS_FS is not set -+# CONFIG_EFS_FS is not set -+CONFIG_JFFS_FS=y -+CONFIG_JFFS_FS_VERBOSE=0 -+CONFIG_JFFS_PROC_FS=y -+CONFIG_JFFS2_FS=y -+CONFIG_JFFS2_FS_DEBUG=0 -+# CONFIG_JFFS2_FS_NAND is not set -+# CONFIG_JFFS2_FS_NOR_ECC is not set -+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -+CONFIG_JFFS2_ZLIB=y -+CONFIG_JFFS2_RTIME=y -+# CONFIG_JFFS2_RUBIN is not set -+CONFIG_CRAMFS=y -+# CONFIG_VXFS_FS is not set -+# CONFIG_HPFS_FS is not set -+# CONFIG_QNX4FS_FS is not set -+# CONFIG_SYSV_FS is not set -+# CONFIG_UFS_FS is not set -+ -+# -+# Network File Systems -+# -+# CONFIG_NFS_FS is not set -+# CONFIG_NFSD is not set -+# CONFIG_SMB_FS is not set -+# CONFIG_CIFS is not set -+# CONFIG_NCP_FS is not set -+# CONFIG_CODA_FS is not set -+# CONFIG_AFS_FS is not set -+ -+# -+# Partition Types -+# -+CONFIG_PARTITION_ADVANCED=y -+# CONFIG_ACORN_PARTITION is not set -+# CONFIG_OSF_PARTITION is not set -+# CONFIG_AMIGA_PARTITION is not set -+# CONFIG_ATARI_PARTITION is not set -+# CONFIG_MAC_PARTITION is not set -+CONFIG_MSDOS_PARTITION=y -+# CONFIG_BSD_DISKLABEL is not set -+# CONFIG_MINIX_SUBPARTITION is not set -+# CONFIG_SOLARIS_X86_PARTITION is not set -+# CONFIG_UNIXWARE_DISKLABEL is not set -+# CONFIG_LDM_PARTITION is not set -+# CONFIG_SGI_PARTITION is not set -+# CONFIG_ULTRIX_PARTITION is not set -+# CONFIG_SUN_PARTITION is not set -+# CONFIG_EFI_PARTITION is not set -+ -+# -+# Native Language Support -+# -+CONFIG_NLS=y -+CONFIG_NLS_DEFAULT="utf8" -+CONFIG_NLS_CODEPAGE_437=y -+# CONFIG_NLS_CODEPAGE_737 is not set -+# CONFIG_NLS_CODEPAGE_775 is not set -+# CONFIG_NLS_CODEPAGE_850 is not set -+# CONFIG_NLS_CODEPAGE_852 is not set -+# CONFIG_NLS_CODEPAGE_855 is not set -+# CONFIG_NLS_CODEPAGE_857 is not set -+# CONFIG_NLS_CODEPAGE_860 is not set -+# CONFIG_NLS_CODEPAGE_861 is not set -+# CONFIG_NLS_CODEPAGE_862 is not set -+# CONFIG_NLS_CODEPAGE_863 is not set -+# CONFIG_NLS_CODEPAGE_864 is not set -+# CONFIG_NLS_CODEPAGE_865 is not set -+# CONFIG_NLS_CODEPAGE_866 is not set -+# CONFIG_NLS_CODEPAGE_869 is not set -+# CONFIG_NLS_CODEPAGE_936 is not set -+# CONFIG_NLS_CODEPAGE_950 is not set -+# CONFIG_NLS_CODEPAGE_932 is not set -+# CONFIG_NLS_CODEPAGE_949 is not set -+# CONFIG_NLS_CODEPAGE_874 is not set -+# CONFIG_NLS_ISO8859_8 is not set -+# CONFIG_NLS_CODEPAGE_1250 is not set -+# CONFIG_NLS_CODEPAGE_1251 is not set -+# CONFIG_NLS_ASCII is not set -+CONFIG_NLS_ISO8859_1=y -+# CONFIG_NLS_ISO8859_2 is not set -+# CONFIG_NLS_ISO8859_3 is not set -+# CONFIG_NLS_ISO8859_4 is not set -+# CONFIG_NLS_ISO8859_5 is not set -+# CONFIG_NLS_ISO8859_6 is not set -+# CONFIG_NLS_ISO8859_7 is not set -+# CONFIG_NLS_ISO8859_9 is not set -+# CONFIG_NLS_ISO8859_13 is not set -+# CONFIG_NLS_ISO8859_14 is not set -+# CONFIG_NLS_ISO8859_15 is not set -+# CONFIG_NLS_KOI8_R is not set -+# CONFIG_NLS_KOI8_U is not set -+CONFIG_NLS_UTF8=y -+ -+# -+# Library routines -+# -+# CONFIG_CRC_CCITT is not set -+CONFIG_CRC32=y -+# CONFIG_LIBCRC32C is not set -+CONFIG_ZLIB_INFLATE=y -+CONFIG_ZLIB_DEFLATE=y -+ -+# -+# Profiling support -+# -+# CONFIG_PROFILING is not set -+ -+# -+# Kernel hacking -+# -+# CONFIG_PRINTK_TIME is not set -+# CONFIG_DEBUG_KERNEL is not set -+CONFIG_LOG_BUF_SHIFT=14 -+CONFIG_SERIAL_TEXT_DEBUG=y -+CONFIG_PPC_OCP=y -+ -+# -+# Security options -+# -+# CONFIG_KEYS is not set -+# CONFIG_SECURITY is not set -+ -+# -+# Cryptographic options -+# -+# CONFIG_CRYPTO is not set -+ -+# -+# Hardware crypto devices -+# -diff -urN linux-original/arch/ppc/kernel/Makefile linux/arch/ppc/kernel/Makefile ---- linux-original/arch/ppc/kernel/Makefile 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/kernel/Makefile 2005-07-08 08:55:27.000000000 -0400 -@@ -31,4 +31,3 @@ - ifndef CONFIG_MATH_EMULATION - obj-$(CONFIG_8xx) += softemu8xx.o - endif -- -diff -urN linux-original/arch/ppc/platforms/Makefile linux/arch/ppc/platforms/Makefile ---- linux-original/arch/ppc/platforms/Makefile 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/platforms/Makefile 2005-07-08 08:55:27.000000000 -0400 -@@ -44,6 +44,7 @@ - obj-$(CONFIG_RADSTONE_PPC7D) += radstone_ppc7d.o - obj-$(CONFIG_SANDPOINT) += sandpoint.o - obj-$(CONFIG_SBC82xx) += sbc82xx.o -+obj-$(CONFIG_IOMEGA8241) += iomega8241.o - obj-$(CONFIG_SPRUCE) += spruce.o - obj-$(CONFIG_LITE5200) += lite5200.o - -diff -urN linux-original/arch/ppc/platforms/iomega8241.c linux/arch/ppc/platforms/iomega8241.c ---- linux-original/arch/ppc/platforms/iomega8241.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux/arch/ppc/platforms/iomega8241.c 2005-08-08 12:53:30.000000000 -0400 -@@ -0,0 +1,567 @@ -+/* -+ * arch/ppc/platforms/iomega8241.c -+ * -+ * The Iomega StorCenter Network Hard Drive platform is based on the -+ * original sandpoint test platform. That GNU copyright information -+ * is reproduced below: -+ * -+ * Board setup routines for the Motorola SPS Sandpoint Test Platform. -+ * -+ * Author: Mark A. Greer -+ * mgreer@mvista.com -+ * -+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under -+ * the terms of the GNU General Public License version 2. This program -+ * is licensed "as is" without any warranty of any kind, whether express -+ * or implied. -+ */ -+ -+/* -+ * Iomega StorCenter Network Hard Drive. -+ * -+ * Maintainer (Iomega Port): Anthony Russello -+ * russello@iomega.com -+ * Much of the below code was taken from the original sandpoint.c/.h port -+ * done my Mark A. Greer (see above copyright information). It was adapted -+ * to support a custom board. -+ */ -+ -+#include <linux/config.h> -+#include <linux/stddef.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/errno.h> -+#include <linux/reboot.h> -+#include <linux/pci.h> -+#include <linux/kdev_t.h> -+#include <linux/major.h> -+#include <linux/initrd.h> -+#include <linux/console.h> -+#include <linux/delay.h> -+#include <linux/irq.h> -+#include <linux/ide.h> -+#include <linux/seq_file.h> -+#include <linux/root_dev.h> -+#include <linux/serial.h> -+#include <linux/tty.h> /* for linux/serial_core.h */ -+#include <linux/serial_core.h> -+#include <linux/serialP.h> -+#include <linux/serial_reg.h> -+ -+#include <asm/system.h> -+#include <asm/pgtable.h> -+#include <asm/page.h> -+#include <asm/time.h> -+#include <asm/dma.h> -+#include <asm/io.h> -+#include <asm/machdep.h> -+#include <asm/prom.h> -+#include <asm/smp.h> -+#include <asm/vga.h> -+#include <asm/open_pic.h> -+#include <asm/i8259.h> -+#include <asm/todc.h> -+#include <asm/bootinfo.h> -+#include <asm/mpc10x.h> -+#include <asm/pci-bridge.h> -+#include <asm/kgdb.h> -+ -+#include "iomega8241.h" -+ -+static struct serial_state rs_table[RS_TABLE_SIZE] = { -+ SERIAL_PORT_DFNS /* defined in iomega8241.h */ -+}; -+ -+/* Real Time Clock */ -+extern spinlock_t rtc_lock; -+extern int ds1337_do_command(int id, int cmd, void *arg); -+#define DS1337_GET_DATE 0 -+#define DS1337_SET_DATE 1 -+ -+unsigned char __res[sizeof(bd_t)]; -+ -+static void iomega8241_halt(void); -+ -+/* -+ * Define all of the IRQ senses and polarities. -+ */ -+static u_char iomega8241_openpic_initsenses[] __initdata = { -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 0: AN983B */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 1: IDE VIA DS6410 */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 2: USB */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 3: USB */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 4: USB */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 5: UART0 */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 6: UART1 */ -+}; -+ -+/* -+ * Define all of the PCI IRQ Mappings -+ */ -+static inline int -+iomega8241_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -+{ -+ static char pci_irq_table[][4] = -+ /* -+ * PCI IDSEL/INTPIN->INTLINE -+ * A B C D -+ */ -+ { -+ { 1, 1, 0, 0 }, -+ { 2, 3, 4, 1 }, -+ { 0, 0, 4, 4 }, -+ { 3, 3, 4, 4 }, -+ { 3, 3, 4, 4 }, -+ }; -+ -+ const long min_idsel = 13, max_idsel = 17, irqs_per_slot = 4; -+ return PCI_IRQ_TABLE_LOOKUP; -+} -+ -+static int -+iomega8241_exclude_device(u_char bus, u_char devfn) -+{ -+ if ((bus == 0) && (PCI_SLOT(devfn) == IOMEGA8241_HOST_BRIDGE_IDSEL)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ else -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static void __init -+iomega8241_find_bridges(void) -+{ -+ struct pci_controller *hose; -+ -+ hose = pcibios_alloc_controller(); -+ -+ if (!hose) -+ return; -+ -+ hose->first_busno = 0; -+ hose->last_busno = 0x1; -+ -+ if (mpc10x_bridge_init(hose, -+ MPC10X_MEM_MAP_B, -+ MPC10X_MEM_MAP_B, -+ MPC10X_MAPB_EUMB_BASE) == 0) { -+ -+ ppc_md.pci_exclude_device = iomega8241_exclude_device; -+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); -+ ppc_md.pcibios_fixup = NULL; -+ ppc_md.pcibios_fixup_bus = NULL; -+ ppc_md.pci_swizzle = common_swizzle; -+ ppc_md.pci_map_irq = iomega8241_map_irq; -+ } -+ else { -+ if (ppc_md.progress) -+ ppc_md.progress("Bridge init failed", 0x100); -+ printk("Host bridge init failed\n"); -+ } -+ return; -+} -+ -+static void __init -+iomega8241_setup_arch(void) -+{ -+ int i = 0; -+ -+ loops_per_jiffy = 100000000 / HZ; -+ -+#ifdef CONFIG_BLK_DEV_INITRD -+ if (initrd_start) -+ ROOT_DEV = Root_RAM0; -+ else -+#endif -+#ifdef CONFIG_ROOT_NFS -+ ROOT_DEV = Root_NFS; -+#else -+ ROOT_DEV = Root_HDA1; -+#endif -+ -+ /* Lookup PCI host bridges */ -+ iomega8241_find_bridges(); -+ -+#ifdef CONFIG_DUMMY_CONSOLE -+ conswitchp = &dummy_con; -+#endif -+ -+ for (i = 0; i < 2; i++) { -+ rs_table[i].port = (ulong) ioremap (rs_table[i].port, PAGE_SIZE); -+ rs_table[i].iomem_base = (u8 *) rs_table[i].port; -+ } -+ -+ writeb(readb(rs_table[1].iomem_base + 0x11) | 0x1, rs_table[1].iomem_base + 0x11); -+ -+ printk(KERN_INFO "Iomega StorCenter Network Hard Drive\n"); -+ printk(KERN_INFO "Based on the Freescale Sandpoint Development System\n"); -+ -+ /* DINK32 12.3 and below do not correctly enable any caches. -+ * We will do this now with good known values. Future versions -+ * of DINK32 are supposed to get this correct. -+ */ -+ if (cpu_has_feature(CPU_FTR_SPEC7450)) -+ /* 745x is different. We only want to pass along enable. */ -+ _set_L2CR(L2CR_L2E); -+ else if (cpu_has_feature(CPU_FTR_L2CR)) -+ /* All modules have 1MB of L2. We also assume that an -+ * L2 divisor of 3 will work. -+ */ -+ _set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3 -+ | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF); -+#if 0 -+ /* Untested right now. */ -+ if (cpu_has_feature(CPU_FTR_L3CR)) { -+ /* Magic value. */ -+ _set_L3CR(0x8f032000); -+ } -+#endif -+} -+ -+#define IOMEGA8241_87308_CFG_ADDR 0x15c -+#define IOMEGA8241_87308_CFG_DATA 0x15d -+ -+#define IOMEGA8241_87308_CFG_INB(addr, byte) { \ -+ outb((addr), IOMEGA8241_87308_CFG_ADDR); \ -+ (byte) = inb(IOMEGA8241_87308_CFG_DATA); \ -+} -+ -+#define IOMEGA8241_87308_CFG_OUTB(addr, byte) { \ -+ outb((addr), IOMEGA8241_87308_CFG_ADDR); \ -+ outb((byte), IOMEGA8241_87308_CFG_DATA); \ -+} -+ -+#define IOMEGA8241_87308_SELECT_DEV(dev_num) { \ -+ IOMEGA8241_87308_CFG_OUTB(0x07, (dev_num)); \ -+} -+ -+#define IOMEGA8241_87308_DEV_ENABLE(dev_num) { \ -+ IOMEGA8241_87308_SELECT_DEV(dev_num); \ -+ IOMEGA8241_87308_CFG_OUTB(0x30, 0x01); \ -+} -+ -+static int __init -+iomega8241_request_io(void) -+{ -+ request_region(0x00,0x20,"dma1"); -+ request_region(0x20,0x20,"pic1"); -+ request_region(0x40,0x20,"timer"); -+ request_region(0x80,0x10,"dma page reg"); -+ request_region(0xa0,0x20,"pic2"); -+ request_region(0xc0,0x20,"dma2"); -+ -+ return 0; -+} -+ -+arch_initcall(iomega8241_request_io); -+ -+/* -+ * Interrupt setup and service. Interrrupts on the Sandpoint come -+ * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO). -+ * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4, -+ * IDE is on EPIC 7 and 8. -+ */ -+static void __init -+iomega8241_init_IRQ(void) -+{ -+ OpenPIC_InitSenses = iomega8241_openpic_initsenses; -+ OpenPIC_NumInitSenses = sizeof(iomega8241_openpic_initsenses); -+ -+ /* -+ * We need to tell openpic_set_sources where things actually are. -+ * mpc10x_common will set up OpenPIC_Addr at ioremap(EUMB phys base + -+ * EPIC offset (0x40000)); The EPIC IRQ register address map - -+ * Interrupt Source Configuration Registers gives these numbers as -+ * offsets starting at 0x50200, we need to adjust accordingly -+ */ -+ openpic_set_sources(0, 5, OpenPIC_Addr + 0x10200); -+ openpic_set_sources(5, 2, OpenPIC_Addr + 0x11120); -+ -+ openpic_init(0); -+} -+ -+static int -+iomega8241_get_irq(struct pt_regs *regs) -+{ -+ int irq; -+ -+ irq = openpic_irq(); -+ if (irq == OPENPIC_VEC_SPURIOUS) -+ irq = -1; -+ -+ return irq; -+} -+ -+static u32 -+iomega8241_irq_canonicalize(u32 irq) -+{ -+ return irq; -+} -+ -+static void __init -+iomega8241_init2(void) -+{ -+ return; -+} -+ -+static unsigned long __init -+iomega8241_find_end_of_memory(void) -+{ -+ bd_t *bp = (bd_t *)__res; -+ -+ if (bp->bi_memsize) -+ return bp->bi_memsize; -+ -+ return 64*1024*1024; -+} -+ -+static void __init -+iomega8241_map_io(void) -+{ -+ /* changes suggested by Freescale: */ -+ io_block_mapping(0xfc000000, 0xfc000000, 0x04000000, _PAGE_IO); -+} -+ -+static void -+iomega8241_restart(char *cmd) -+{ -+ local_irq_disable(); -+ -+ /* Set exception prefix high - to the firmware */ -+ _nmask_and_or_msr(0, MSR_IP); -+ -+ for(;;); /* Spin until reset happens */ -+} -+ -+static void -+iomega8241_power_off(void) -+{ -+ local_irq_disable(); -+ for(;;); /* No way to shut power off with software */ -+ /* NOTREACHED */ -+} -+ -+static void -+iomega8241_halt(void) -+{ -+ iomega8241_power_off(); -+ /* NOTREACHED */ -+} -+ -+static int -+iomega8241_show_cpuinfo(struct seq_file *m) -+{ -+ seq_printf(m, "vendor\t\t: Iomega Corporation\n"); -+ seq_printf(m, "machine\t\t: Iomega StorCenter Network Hard Drive\n"); -+ -+ return 0; -+} -+ -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+/* -+ * IDE support. -+ */ -+static int iomega8241_ide_ports_known = 0; -+static unsigned long iomega8241_ide_regbase[MAX_HWIFS]; -+static unsigned long iomega8241_ide_ctl_regbase[MAX_HWIFS]; -+static unsigned long iomega8241_idedma_regbase; -+ -+static void -+iomega8241_ide_probe(void) -+{ -+ struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_VIA, -+ PCI_DEVICE_ID_VIA_6410, NULL); -+ -+ if (pdev) { -+ iomega8241_ide_regbase[0]=pdev->resource[0].start; -+ iomega8241_ide_regbase[1]=pdev->resource[2].start; -+ iomega8241_ide_ctl_regbase[0]=pdev->resource[1].start; -+ iomega8241_ide_ctl_regbase[1]=pdev->resource[3].start; -+ iomega8241_idedma_regbase=pdev->resource[4].start; -+ -+ printk("Found: VIA VT6410 based IDE\n"); -+ } -+ -+ iomega8241_ide_ports_known = 1; -+} -+ -+static int -+iomega8241_ide_default_irq(unsigned long base) -+{ -+ if (iomega8241_ide_ports_known == 0) -+ iomega8241_ide_probe(); -+ -+ if (base == iomega8241_ide_regbase[0]) -+ return IDE_INTRUPT; -+ else if (base == iomega8241_ide_regbase[1]) -+ return IDE_INTRUPT; -+ else -+ return 0; -+} -+ -+static unsigned long -+iomega8241_ide_default_io_base(int index) -+{ -+ if (iomega8241_ide_ports_known == 0) -+ iomega8241_ide_probe(); -+ -+ return iomega8241_ide_regbase[index]; -+} -+ -+static void __init -+iomega8241_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, -+ unsigned long ctrl_port, int *irq) -+{ -+ unsigned long reg = data_port; -+ uint alt_status_base; -+ int i; -+ -+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { -+ hw->io_ports[i] = reg++; -+ } -+ -+ if (data_port == iomega8241_ide_regbase[0]) { -+ alt_status_base = iomega8241_ide_ctl_regbase[0] + 2; -+ hw->irq = IDE_INTRUPT; -+ } else if (data_port == iomega8241_ide_regbase[1]) { -+ alt_status_base = iomega8241_ide_ctl_regbase[1] + 2; -+ hw->irq = IDE_INTRUPT; -+ } else { -+ alt_status_base = 0; -+ hw->irq = 0; -+ } -+ -+ if (ctrl_port) { -+ hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; -+ } else { -+ hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base; -+ } -+ -+ if (irq != NULL) { -+ *irq = hw->irq; -+ } -+} -+#endif -+ -+/* -+ * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1. -+ */ -+static __inline__ void -+iomega8241_set_bat(void) -+{ -+ unsigned long bat3u, bat3l; -+ -+ __asm__ __volatile__( -+ " lis %0,0xf800\n \ -+ ori %1,%0,0x002a\n \ -+ ori %0,%0,0x0ffe\n \ -+ mtspr 0x21e,%0\n \ -+ mtspr 0x21f,%1\n \ -+ isync\n \ -+ sync " -+ : "=r" (bat3u), "=r" (bat3l)); -+} -+ -+TODC_ALLOC(); -+ -+/* Real Time Clock support. -+ * StorCenter has a DS1337 accessed by I2C. -+ */ -+static ulong iomega8241_get_rtc_time(void) -+{ -+ struct rtc_time tm; -+ int result; -+ -+ spin_lock(&rtc_lock); -+ result = ds1337_do_command(0, DS1337_GET_DATE, &tm); -+ spin_unlock(&rtc_lock); -+ -+ if (result == 0) -+ result = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, -+ tm.tm_hour, tm.tm_min, tm.tm_sec); -+ -+ return result; -+} -+ -+static int iomega8241_set_rtc_time(unsigned long nowtime) -+{ -+ struct rtc_time tm; -+ int result; -+ -+ spin_lock(&rtc_lock); -+ to_tm(nowtime, &tm); -+ result = ds1337_do_command(0, DS1337_SET_DATE, &tm); -+ spin_unlock(&rtc_lock); -+ -+ return result; -+} -+ -+ -+void __init -+platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ parse_bootinfo(find_bootinfo()); -+ -+ /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) -+ * are non-zero, then we should use the board info from the bd_t -+ * structure and the cmdline pointed to by r6 instead of the -+ * information from birecs, if any. Otherwise, use the information -+ * from birecs as discovered by the preceeding call to -+ * parse_bootinfo(). This rule should work with both PPCBoot, which -+ * uses a bd_t board info structure, and the kernel boot wrapper, -+ * which uses birecs. -+ */ -+ if (r3 && r6) { -+ /* copy board info structure */ -+ memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); -+ /* copy command line */ -+ *(char *)(r7+KERNELBASE) = 0; -+ strcpy(cmd_line, (char *)(r6+KERNELBASE)); -+ } -+ -+#ifdef CONFIG_BLK_DEV_INITRD -+ /* take care of initrd if we have one */ -+ if (r4) { -+ initrd_start = r4 + KERNELBASE; -+ initrd_end = r5 + KERNELBASE; -+ } -+#endif /* CONFIG_BLK_DEV_INITRD */ -+ -+ /* Map in board regs, etc. */ -+ iomega8241_set_bat(); -+ -+ isa_io_base = MPC10X_MAPB_ISA_IO_BASE; -+ isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE; -+ pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET; -+ ISA_DMA_THRESHOLD = 0x00ffffff; -+ DMA_MODE_READ = 0x44; -+ DMA_MODE_WRITE = 0x48; -+ -+ ppc_md.setup_arch = iomega8241_setup_arch; -+ ppc_md.show_cpuinfo = iomega8241_show_cpuinfo; -+ ppc_md.irq_canonicalize = iomega8241_irq_canonicalize; -+ ppc_md.init_IRQ = iomega8241_init_IRQ; -+ ppc_md.get_irq = iomega8241_get_irq; -+ ppc_md.init = iomega8241_init2; -+ -+ ppc_md.restart = iomega8241_restart; -+ ppc_md.power_off = iomega8241_power_off; -+ ppc_md.halt = iomega8241_halt; -+ -+ ppc_md.find_end_of_memory = iomega8241_find_end_of_memory; -+ ppc_md.setup_io_mappings = iomega8241_map_io; -+ -+ /* What USI had in their 2.4.21 kernel: */ -+ ppc_md.set_rtc_time = iomega8241_set_rtc_time; -+ ppc_md.get_rtc_time = iomega8241_get_rtc_time; -+ ppc_md.calibrate_decr = todc_calibrate_decr; -+ -+ ppc_md.find_end_of_memory = iomega8241_find_end_of_memory; -+ ppc_md.setup_io_mappings = iomega8241_map_io; -+ -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+ ppc_ide_md.default_irq = iomega8241_ide_default_irq; -+ ppc_ide_md.default_io_base = iomega8241_ide_default_io_base; -+ ppc_ide_md.ide_init_hwif = iomega8241_ide_init_hwif_ports; -+#endif -+} -diff -urN linux-original/arch/ppc/platforms/iomega8241.h linux/arch/ppc/platforms/iomega8241.h ---- linux-original/arch/ppc/platforms/iomega8241.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux/arch/ppc/platforms/iomega8241.h 2005-08-08 13:11:35.000000000 -0400 -@@ -0,0 +1,76 @@ -+/* -+ * arch/ppc/platforms/iomega8241.h -+ * -+ * The Iomega StorCenter Network Hard Drive platform is based on the -+ * original sandpoint test platform. That GNU copyright information -+ * is reproduced below: -+ * -+ * Board setup routines for the Motorola SPS Sandpoint Test Platform. -+ * -+ * Author: Mark A. Greer -+ * mgreer@mvista.com -+ * -+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under -+ * the terms of the GNU General Public License version 2. This program -+ * is licensed "as is" without any warranty of any kind, whether express -+ * or implied. -+ */ -+ -+#ifndef __PPC_PLATFORMS_IOMEGA8241_H -+#define __PPC_PLATFORMS_IOMEGA8241_H -+ -+#include <asm/ppcboot.h> -+#include <linux/config.h> -+ -+/* -+ * G2 Configuration: -+ * -+ * DEVICE IDSEL INTERRUPT NUMBER -+ * AN983B AD12 IRQ0 -+ * IDE Via DS6410 AD13 IRQ1 -+ * NEC USB uPD720101 AD14 IRQ2,3,4 -+ */ -+ -+#define IDE_INTRUPT 1 -+ -+/* -+ * The sandpoint boards have processor modules that either have an 8240 or -+ * an MPC107 host bridge on them. These bridges have an IDSEL line that allows -+ * them to respond to PCI transactions as if they were a normal PCI devices. -+ * However, the processor on the processor side of the bridge can not reach -+ * out onto the PCI bus and then select the bridge or bad things will happen -+ * (documented in the 8240 and 107 manuals). -+ * Because of this, we always skip the bridge PCI device when accessing the -+ * PCI bus. The PCI slot that the bridge occupies is defined by the macro -+ * below. -+ */ -+#define IOMEGA8241_HOST_BRIDGE_IDSEL 12 -+ -+void board_find_bridges(void); -+void iomega8241_fix_uart(void); -+/* -+ * Serial defines. -+ */ -+#define IOMEGA8241_SERIAL_0 0xFDF04500 -+#define IOMEGA8241_SERIAL_1 0xFDF04600 -+ -+#define RS_TABLE_SIZE 4 -+ -+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -+#define BASE_BAUD ( 100000000 / 16 ) /* 100Mhz speed, divided by 16 -+ to make the output freqency*/ -+#define UART_CLK 1843200 -+ -+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -+ -+#define STD_SERIAL_PORT_DFNS \ -+ { 0, BASE_BAUD, IOMEGA8241_SERIAL_0, 5, STD_COM_FLAGS, /* ttyS0 */ \ -+ iomem_base: (u8 *)IOMEGA8241_SERIAL_0, \ -+ io_type: SERIAL_IO_MEM }, \ -+ { 0, BASE_BAUD, IOMEGA8241_SERIAL_1, 6, STD_COM_FLAGS, /* ttyS1 */ \ -+ iomem_base: (u8 *)IOMEGA8241_SERIAL_1, \ -+ io_type: SERIAL_IO_MEM }, -+ -+#define SERIAL_PORT_DFNS STD_SERIAL_PORT_DFNS -+ -+#endif /* __PPC_PLATFORMS_IOMEGA8241_H */ -diff -urN linux-original/arch/ppc/syslib/Makefile linux/arch/ppc/syslib/Makefile ---- linux-original/arch/ppc/syslib/Makefile 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/syslib/Makefile 2005-07-08 08:55:27.000000000 -0400 -@@ -77,6 +77,7 @@ - obj-$(CONFIG_PRPMC800) += open_pic.o indirect_pci.o pci_auto.o - obj-$(CONFIG_RADSTONE_PPC7D) += i8259.o pci_auto.o - obj-$(CONFIG_SANDPOINT) += i8259.o pci_auto.o todc_time.o -+obj-$(CONFIG_IOMEGA8241) += i8259.o pci_auto.o todc_time.o - obj-$(CONFIG_SBC82xx) += todc_time.o - obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \ - todc_time.o -diff -urN linux-original/arch/ppc/syslib/mpc10x_common.c linux/arch/ppc/syslib/mpc10x_common.c ---- linux-original/arch/ppc/syslib/mpc10x_common.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/syslib/mpc10x_common.c 2005-07-08 08:55:27.000000000 -0400 -@@ -330,7 +330,7 @@ - * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd. - */ - if (host_bridge == MPC10X_BRIDGE_8245) { -- ulong picr2; -+ uint picr2 = 0; - - early_read_config_dword(hose, 0, PCI_DEVFN(0,0), - MPC10X_CFG_PICR2_REG, &picr2); -diff -urN linux-original/arch/ppc/syslib/open_pic.c linux/arch/ppc/syslib/open_pic.c ---- linux-original/arch/ppc/syslib/open_pic.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/syslib/open_pic.c 2005-07-08 08:55:27.000000000 -0400 -@@ -319,8 +319,7 @@ - } - OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr; - --#ifdef CONFIG_EPIC_SERIAL_MODE -- /* Have to start from ground zero. -+#if defined(CONFIG_EPIC_SERIAL_MODE) - */ - openpic_reset(); - #endif -@@ -1073,4 +1072,3 @@ - } - - subsys_initcall(init_openpic_sysfs); -- -diff -urN linux-original/arch/ppc/syslib/todc_time.c linux/arch/ppc/syslib/todc_time.c ---- linux-original/arch/ppc/syslib/todc_time.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/arch/ppc/syslib/todc_time.c 2005-08-08 12:58:47.000000000 -0400 -@@ -412,6 +412,7 @@ - return 0; - } - -+#ifndef CONFIG_IOMEGA8241 /* Not used by the Iomega8241 platform */ - /* - * Manipulates read bit to reliably read seconds at a high rate. - */ -@@ -450,6 +451,8 @@ - return val; - } - -+#endif /* CONFIG_IOMEGA8241 */ -+ - /* - * This was taken from prep_setup.c - * Use the NVRAM RTC to time a second to calibrate the decrementer. -@@ -457,10 +460,13 @@ - void __init - todc_calibrate_decr(void) - { -+#ifdef CONFIG_IOMEGA8241 -+ ulong freq = 25000000; -+#else - ulong freq; - ulong tbl, tbu; -- long i, loop_count; -- u_char sec; -+ long i, loop_count; -+ u_char sec; - - todc_time_init(); - -@@ -502,7 +508,8 @@ - - freq -= tbl; - } while ((get_tbu() != tbu) && (++loop_count < 2)); -- -+#endif /* CONFIG_IOMEGA8241 */ -+ - printk("time_init: decrementer frequency = %lu.%.6lu MHz\n", - freq/1000000, freq%1000000); - -diff -urN linux-original/drivers/char/rtc.c linux/drivers/char/rtc.c ---- linux-original/drivers/char/rtc.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/char/rtc.c 2005-07-08 08:55:27.000000000 -0400 -@@ -498,9 +498,16 @@ - } - case RTC_RD_TIME: /* Read the time/date from RTC */ - { -+#ifdef CONFIG_IOMEGA8241 -+ unsigned long usi_time; -+ usi_time = ds1337_get_time(); -+ to_tm(usi_time,wtime); -+ break; -+#else - memset(&wtime, 0, sizeof(struct rtc_time)); - rtc_get_rtc_time(&wtime); - break; -+#endif /* CONFIG_IOMEGA8241 */ - } - case RTC_SET_TIME: /* Set the RTC */ - { -@@ -542,7 +549,7 @@ - - if ((yrs -= epoch) > 255) /* They are unsigned */ - return -EINVAL; -- -+#ifndef CONFIG_IOMEGA8241 - spin_lock_irq(&rtc_lock); - #ifdef CONFIG_MACH_DECSTATION - real_yrs = yrs; -@@ -598,6 +605,11 @@ - - spin_unlock_irq(&rtc_lock); - return 0; -+#else /* CONFIG_IOMEGA8241 */ -+ /* next is the forth API provided by ds1337.c USI-SS */ -+ ds1337_usi_set_time(yrs,mon,day,hrs,min,sec); -+ break; -+#endif /* CONFIG_IOMEGA8241 */ - } - #ifdef RTC_IRQ - case RTC_IRQP_READ: /* Read the periodic IRQ rate. */ -diff -urN linux-original/drivers/i2c/busses/i2c-mpc.c linux/drivers/i2c/busses/i2c-mpc.c ---- linux-original/drivers/i2c/busses/i2c-mpc.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/i2c/busses/i2c-mpc.c 2005-08-26 15:04:29.000000000 -0400 -@@ -68,6 +68,7 @@ - writeb(x, i2c->base + MPC_I2C_CR); - } - -+#ifndef CONFIG_IOMEGA8241 - static irqreturn_t mpc_i2c_isr(int irq, void *dev_id, struct pt_regs *regs) - { - struct mpc_i2c *i2c = dev_id; -@@ -79,6 +80,7 @@ - } - return IRQ_HANDLED; - } -+#endif /* CONFIG_IOMEGA8241 */ - - static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) - { -@@ -291,7 +293,11 @@ - .algo = &mpc_algo, - .class = I2C_CLASS_HWMON, - .timeout = 1, -+#ifdef CONFIG_IOMEGA8241 -+ .retries = 400 -+#else - .retries = 1 -+#endif /* CONFIG_IOMEGA8241 */ - }; - - #ifdef CONFIG_FSL_OCP -@@ -322,6 +328,7 @@ - goto fail_map; - } - -+#ifndef CONFIG_IOMEGA8241 - if (i2c->irq != OCP_IRQ_NA) - { - if ((result = request_irq(ocp->def->irq, mpc_i2c_isr, -@@ -331,6 +338,7 @@ - goto fail_irq; - } - } else -+#endif /* CONFIG_IOMEGA8241 */ - i2c->irq = 0; - - i2c->adap = mpc_ops; -@@ -348,8 +356,10 @@ - fail_add: - if (ocp->def->irq != OCP_IRQ_NA) - free_irq(ocp->def->irq, 0); -+#ifndef CONFIG_IOMEGA8241 - fail_irq: - iounmap(i2c->base); -+#endif /* CONFIG_IOMEGA8241 */ - fail_map: - release_mem_region(ocp->def->paddr, MPC_I2C_REGION); - kfree(i2c); -diff -urN linux-original/drivers/i2c/chips/ds1337.c linux/drivers/i2c/chips/ds1337.c ---- linux-original/drivers/i2c/chips/ds1337.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/i2c/chips/ds1337.c 2005-09-13 15:16:43.000000000 -0400 -@@ -20,10 +20,11 @@ - #include <linux/i2c.h> - #include <linux/i2c-sensor.h> - #include <linux/string.h> --#include <linux/rtc.h> /* get the user-level API */ -+#include <linux/rtc.h> - #include <linux/bcd.h> - #include <linux/list.h> - -+ - /* Device registers */ - #define DS1337_REG_HOUR 2 - #define DS1337_REG_DAY 3 -@@ -75,7 +76,9 @@ - /* - * Internal variables - */ -+#ifndef CONFIG_IOMEGA8241 - static int ds1337_id; -+#endif /* CONFIG_IOMEGA8241 */ - static LIST_HEAD(ds1337_clients); - - static inline int ds1337_read(struct i2c_client *client, u8 reg, u8 *value) -@@ -95,7 +98,9 @@ - */ - static int ds1337_get_datetime(struct i2c_client *client, struct rtc_time *dt) - { -+#ifndef CONFIG_IOMEGA8241 - struct ds1337_data *data = i2c_get_clientdata(client); -+#endif /* CONFIG_IOMEGA8241 */ - int result; - u8 buf[7]; - u8 val; -@@ -119,8 +124,12 @@ - msg[1].len = sizeof(buf); - msg[1].buf = &buf[0]; - -+#ifdef CONFIG_IOMEGA8241 -+ result = i2c_transfer(client->adapter, msg, 2); -+#else - result = client->adapter->algo->master_xfer(client->adapter, - &msg[0], 2); -+#endif /* CONFIG_IOMEGA8241 */ - - dev_dbg(&client->adapter->dev, - "%s: [%d] %02x %02x %02x %02x %02x %02x %02x\n", -@@ -145,6 +154,7 @@ - __FUNCTION__, dt->tm_sec, dt->tm_min, - dt->tm_hour, dt->tm_mday, - dt->tm_mon, dt->tm_year, dt->tm_wday); -+#ifndef CONFIG_IOMEGA8241 - } else { - dev_err(&client->adapter->dev, "ds1337[%d]: error reading " - "data! %d\n", data->id, result); -@@ -152,11 +162,20 @@ - } - - return result; -+#else -+ return 0; -+ } -+ dev_err(&client->dev, "error reading data! %d\n", result); -+ return -EIO; -+#endif /* CONFIG_IOMEGA8241 */ -+ - } - - static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt) - { -+#ifndef CONFIG_IOMEGA8241 - struct ds1337_data *data = i2c_get_clientdata(client); -+#endif /* CONFIG_IOMEGA8241 */ - int result; - u8 buf[8]; - u8 val; -@@ -177,7 +196,7 @@ - buf[0] = 0; /* reg offset */ - buf[1] = BIN_TO_BCD(dt->tm_sec); - buf[2] = BIN_TO_BCD(dt->tm_min); -- buf[3] = BIN_TO_BCD(dt->tm_hour) | (1 << 6); -+ buf[3] = BIN_TO_BCD(dt->tm_hour) /*& (0 << 6)*/; - buf[4] = BIN_TO_BCD(dt->tm_wday) + 1; - buf[5] = BIN_TO_BCD(dt->tm_mday); - buf[6] = BIN_TO_BCD(dt->tm_mon); -@@ -194,6 +213,14 @@ - msg[0].len = sizeof(buf); - msg[0].buf = &buf[0]; - -+#ifdef CONFIG_IOMEGA8241 -+ result = i2c_transfer(client->adapter, msg, 1); -+ -+ if (result == 1) -+ return 0; -+ dev_err(&client->dev, "error writing data! %d\n", result); -+ return -EIO; -+#else - result = client->adapter->algo->master_xfer(client->adapter, - &msg[0], 1); - if (result < 0) { -@@ -205,6 +232,7 @@ - } - - return result; -+#endif /* CONFIG_IOMEGA8241 */ - } - - static int ds1337_command(struct i2c_client *client, unsigned int cmd, -@@ -228,6 +256,22 @@ - * Public API for access to specific device. Useful for low-level - * RTC access from kernel code. - */ -+#ifdef CONFIG_IOMEGA8241 -+int ds1337_do_command(int bus, int cmd, void *arg) -+{ -+ struct list_head *walk; -+ struct list_head *tmp; -+ struct ds1337_data *data; -+ -+ list_for_each_safe(walk, tmp, &ds1337_clients) { -+ data = list_entry(walk, struct ds1337_data, list); -+ if (data->client.adapter->nr == bus) -+ return ds1337_command(&data->client, cmd, arg); -+ } -+ -+ return -ENODEV; -+} -+#else - int ds1337_do_command(int id, int cmd, void *arg) - { - struct list_head *walk; -@@ -242,6 +286,7 @@ - - return -ENODEV; - } -+#endif /* CONFIG_IOMEGA8241 */ - - static int ds1337_attach_adapter(struct i2c_adapter *adapter) - { -@@ -346,7 +391,9 @@ - ds1337_init_client(new_client); - - /* Add client to local list */ -+#ifndef CONFIG_IOMEGA8241 - data->id = ds1337_id++; -+#endif /* CONFIG_IOMEGA8241 */ - list_add(&data->list, &ds1337_clients); - - return 0; -@@ -363,9 +410,9 @@ - - /* Ensure that device is set in 24-hour mode */ - val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR); -- if ((val >= 0) && (val & (1 << 6)) == 0) -+ if ((val >= 0) && (val & (0 << 6))) - i2c_smbus_write_byte_data(client, DS1337_REG_HOUR, -- val | (1 << 6)); -+ val & 0x3f); - } - - static int ds1337_detach_client(struct i2c_client *client) -@@ -398,5 +445,9 @@ - MODULE_DESCRIPTION("DS1337 RTC driver"); - MODULE_LICENSE("GPL"); - -+#ifdef CONFIG_IOMEGA8241 -+EXPORT_SYMBOL_GPL(ds1337_do_command); -+#endif /* CONFIG_IOMEGA8241 */ -+ - module_init(ds1337_init); - module_exit(ds1337_exit); -diff -urN linux-original/drivers/ide/pci/via82cxxx.c linux/drivers/ide/pci/via82cxxx.c ---- linux-original/drivers/ide/pci/via82cxxx.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/ide/pci/via82cxxx.c 2005-08-08 13:06:52.000000000 -0400 -@@ -79,6 +79,7 @@ - u8 rev_max; - u16 flags; - } via_isa_bridges[] = { -+ { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, - { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, -@@ -145,6 +146,7 @@ - int len; - u16 c, w; - u8 t, x; -+ u8 ar0, ar1, ar2, ar3; - char *p = buffer; - - via_print("----------VIA BusMastering IDE Configuration" -@@ -176,6 +178,108 @@ - via_print("Max DRDY Pulse Width: %s%s", - via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : ""); - -+#ifdef CONFIG_IOMEGA8241 -+ if(via_config->id == PCI_DEVICE_ID_VIA_6410) { -+ /* -+ * Additional debug information for the VIA VT6410 -+ * IDE Host Controller -+ */ -+ -+ pci_read_config_byte(dev, 0x9, &ar0); -+ via_print("Programming Interface: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0xa, &ar0); -+ via_print("Sub Class Code: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0xb, &ar0); -+ via_print("Base Class Code: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0xd, &ar0); -+ via_print("Latency Timer: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x34, &ar0); -+ via_print("Capability Pointer: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x3c, &ar0); -+ via_print("Interrupt Line: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x3d, &ar0); -+ via_print("Interrupt Pin: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x3e, &ar0); -+ via_print("Minimum Grant: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x3f, &ar0); -+ via_print("Maximum Latency: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x40, &ar0); -+ via_print("IDE Chip Enable: %#x",ar0); -+ -+ pci_read_config_byte(dev, VIA_IDE_CONFIG, &ar0); -+ via_print("IDE Configuration I: %#x",ar0); -+ -+ pci_read_config_byte(dev, VIA_IDE_CONFIG+1, &ar0); -+ via_print("IDE Configuration II: %#x",ar0); -+ -+ pci_read_config_byte(dev, VIA_FIFO_CONFIG, &ar0); -+ via_print("IDE FIFO Configuration: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x44, &ar0); -+ via_print("IDE Miscellaneous Control 1: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x45, &ar0); -+ via_print("IDE Miscellaneous Control 2: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x46, &ar0); -+ via_print("IDE Miscellaneous Control 3: %#x",ar0); -+ -+ pci_read_config_byte(dev, VIA_DRIVE_TIMING+3, &ar0); -+ pci_read_config_byte(dev, VIA_DRIVE_TIMING+2, &ar1); -+ pci_read_config_byte(dev, VIA_DRIVE_TIMING+1, &ar2); -+ pci_read_config_byte(dev, VIA_DRIVE_TIMING, &ar3); -+ via_print("IDE Drive Timing Control: %#x%x%x%x",ar0, ar1, ar2, ar3); -+ -+ pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &ar0); -+ via_print("IDE Address Setup TIme: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x4e, &ar0); -+ via_print("Sec Non-1FO Port Access Timing: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x4f, &ar0); -+ via_print("Pri Non-1FO Port Access Timing: %#x",ar0); -+ -+ pci_read_config_byte(dev, VIA_UDMA_TIMING+3, &ar0); -+ pci_read_config_byte(dev, VIA_UDMA_TIMING+2, &ar1); -+ pci_read_config_byte(dev, VIA_UDMA_TIMING+1, &ar2); -+ pci_read_config_byte(dev, VIA_UDMA_TIMING, &ar3); -+ via_print("UltraDMA Extended Timing Control: %#x%x%x%x",ar0, ar1, ar2, ar3); -+ -+ pci_read_config_byte(dev, 0x54, &ar0); -+ via_print("Revision Register: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x58, &ar0); -+ via_print("PLL Ctrl/Test Mode Enabled: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x59, &ar0); -+ via_print("Slew Rate Control: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x5a, &ar0); -+ via_print("DRVRST Clock Gate/Bus TS Ctrl: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x70, &ar0); -+ via_print("IDE Primary Status: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x71, &ar0); -+ via_print("IDE Pri Interrupt Control: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x78, &ar0); -+ via_print("IDE Secondary Status: %#x",ar0); -+ -+ pci_read_config_byte(dev, 0x79, &ar0); -+ via_print("IDE Sec Interrupt Control: %#x",ar0); -+ } -+#endif /* CONFIG_IOMEGA8241 */ -+ - via_print("-----------------------Primary IDE" - "-------Secondary IDE------"); - via_print("Read DMA FIFO flush: %10s%20s", -@@ -479,10 +583,15 @@ - - case VIA_UDMA_133: - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); -+#ifdef CONFIG_IOMEGA8241 -+ /* The VIA 6410 iis not properly detecting cable types */ -+ for (i = 24; i >= 0; i -= 8) { -+#else - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && -- (((u >> i) & 7) < 6))) { -+ (((u >> i) & 7) < 4))) { -+#endif /* CONFIG_IOMEGA8241 */ - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ -@@ -502,6 +611,10 @@ - /* - * Check whether interfaces are enabled. - */ -+ if(via_config->id == PCI_DEVICE_ID_VIA_6410) { -+ pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); -+ pci_write_config_byte(dev, VIA_IDE_ENABLE, v | 0x3); -+ } - - pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); - -@@ -615,25 +728,35 @@ - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; - } -- --static ide_pci_device_t via82cxxx_chipset __devinitdata = { -- .name = "VP_IDE", -- .init_chipset = init_chipset_via82cxxx, -- .init_hwif = init_hwif_via82cxxx, -- .channels = 2, -- .autodma = NOAUTODMA, -- .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, -- .bootable = ON_BOARD, -+static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = { -+ {/* 0 */ -+ .name = "VP_IDE", -+ .init_chipset = init_chipset_via82cxxx, -+ .init_hwif = init_hwif_via82cxxx, -+ .channels = 2, -+ .autodma = NOAUTODMA, -+ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, -+ .bootable = ON_BOARD, -+ },{ /* 1 */ -+ .name = "VP_IDE", -+ .init_chipset = init_chipset_via82cxxx, -+ .init_hwif = init_hwif_via82cxxx, -+ .channels = 2, -+ .autodma = AUTODMA, // AUTODMA -+ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, -+ .bootable = NEVER_BOARD, -+ } - }; - - static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) - { -- return ide_setup_pci_device(dev, &via82cxxx_chipset); -+ return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]); - } - - static struct pci_device_id via_pci_tbl[] = { - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, -+ { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, - { 0, }, - }; - MODULE_DEVICE_TABLE(pci, via_pci_tbl); -diff -urN linux-original/drivers/mtd/maps/Kconfig linux/drivers/mtd/maps/Kconfig ---- linux-original/drivers/mtd/maps/Kconfig 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/mtd/maps/Kconfig 2005-07-08 08:55:27.000000000 -0400 -@@ -659,5 +659,10 @@ - help - This enables access to the flash chip on the Sharp SL Series of PDAs. - --endmenu -+config MTD_IOMEGA8241 -+ tristate "Map driver for the Iomega 8241 StorCenter board" -+ depends on IOMEGA8241 -+ help -+ Map driver for the Iomega StorCenter Network Hard Drive. - -+endmenu -diff -urN linux-original/drivers/mtd/maps/Makefile linux/drivers/mtd/maps/Makefile ---- linux-original/drivers/mtd/maps/Makefile 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/mtd/maps/Makefile 2005-07-08 08:55:27.000000000 -0400 -@@ -71,3 +71,4 @@ - obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o - obj-$(CONFIG_MTD_DMV182) += dmv182.o - obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o -+obj-$(CONFIG_MTD_IOMEGA8241) += iomega8241_mtd.o -diff -urN linux-original/drivers/mtd/maps/iomega8241_mtd.c linux/drivers/mtd/maps/iomega8241_mtd.c ---- linux-original/drivers/mtd/maps/iomega8241_mtd.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux/drivers/mtd/maps/iomega8241_mtd.c 2005-08-08 13:08:50.000000000 -0400 -@@ -0,0 +1,102 @@ -+/* -+ * drivers/mtd/maps/iomega8241_mtd.c -+ * -+ * Iomega Corporation -+ * -+ * Flash mapping for the Iomega StorCenter Network Hard Drive -+ * -+ * This module is based on the mpc1211.c file created by -+ * Saito.K & Jeanne <ksaito@interface.co.jp> -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <asm/io.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/map.h> -+#include <linux/config.h> -+#include <linux/mtd/partitions.h> -+ -+#include <asm/immap_cpm2.h> -+ -+static struct mtd_info *iomegamtd; -+static struct mtd_partition *parsed_parts; -+ -+struct map_info iomega8241_flash_map = { -+ .name = "Flash", -+ .phys = 0xFF800000, -+ .size = 0x800000, -+ .bankwidth = 1, -+}; -+ -+static struct mtd_partition iomega8241_partitions[] = { -+ { -+ .name = "kernel", -+ /* 1507328 bytes: kernel space */ -+ .size = 0x00170000, -+ .offset = 0, -+ }, { -+ .name = "filesystem", -+ /* 5832704 bytes: root partition */ -+ .size = 0x00590000, -+ /* start is FF970000 */ -+ .offset = MTDPART_OFS_APPEND, -+ }, { -+ .name = "bootloader", -+ /* 262144 bytes for u-boot */ -+ .size = 0x00040000, -+ /* start is FFF00000 */ -+ .offset = MTDPART_OFS_APPEND, -+ }, { -+ .name = "sysconfig", -+ /* 786432 bytes: sysconf partition */ -+ .size = 0x000C0000, -+ /* start is FFF40000 */ -+ .offset = MTDPART_OFS_APPEND, -+ } -+}; -+ -+static int __init -+init_iomega8241_flash(void) -+{ -+ int nr_parts; -+ -+ iomega8241_flash_map.virt = ioremap(iomega8241_flash_map.phys, iomega8241_flash_map.size); -+ -+ simple_map_init(&iomega8241_flash_map); -+ -+ printk("Iomega8241: Probing for flash...\n"); -+ iomegamtd = do_map_probe("cfi_probe", &iomega8241_flash_map); -+ if (!iomegamtd) { -+ printk(KERN_NOTICE "Flash chips not detected at either possible location.\n"); -+ return -ENXIO; -+ } -+ printk("Iomega8241: Flash found at location 0x%x\n", iomega8241_flash_map.phys); -+ iomegamtd->owner = THIS_MODULE; -+ -+ parsed_parts = iomega8241_partitions; -+ nr_parts = ARRAY_SIZE(iomega8241_partitions); -+ -+ add_mtd_partitions(iomegamtd, parsed_parts, nr_parts); -+ return 0; -+} -+ -+static void __exit -+cleanup_iomega8241_flash(void) -+{ -+ if (parsed_parts) -+ del_mtd_partitions(iomegamtd); -+ else -+ del_mtd_device(iomegamtd); -+ map_destroy(iomegamtd); -+} -+ -+module_init(init_iomega8241_flash); -+module_exit(cleanup_iomega8241_flash); -+ -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Anthony Russello <russello@iomega.com>"); -+MODULE_DESCRIPTION("Flash mapping for the Iomega StorCenter Network Hard Drive"); -diff -urN linux-original/drivers/net/r8169.c linux/drivers/net/r8169.c ---- linux-original/drivers/net/r8169.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/net/r8169.c 2005-07-08 08:55:27.000000000 -0400 -@@ -1,261 +1,268 @@ - /* - ========================================================================= -- r8169.c: A RealTek RTL-8169 Gigabit Ethernet driver for Linux kernel 2.4.x. -+ r8169.c: A RealTek RTL8169s/8110s Gigabit Ethernet driver for Linux kernel 2.4.x. - -------------------------------------------------------------------- - - History: - Feb 4 2002 - created initially by ShuChen <shuchen@realtek.com.tw>. - May 20 2002 - Add link status force-mode and TBI mode support. -- 2004 - Massive updates. See kernel SCM system for details. - ========================================================================= -- 1. [DEPRECATED: use ethtool instead] The media can be forced in 5 modes. -- Command: 'insmod r8169 media = SET_MEDIA' -- Ex: 'insmod r8169 media = 0x04' will force PHY to operate in 100Mpbs Half-duplex. -- -- SET_MEDIA can be: -- _10_Half = 0x01 -- _10_Full = 0x02 -- _100_Half = 0x04 -- _100_Full = 0x08 -- _1000_Full = 0x10 -- -- 2. Support TBI mode. --========================================================================= --VERSION 1.1 <2002/10/4> -+ -+RTL8169_VERSION "1.1" <2002/10/4> - - The bit4:0 of MII register 4 is called "selector field", and have to be - 00001b to indicate support of IEEE std 802.3 during NWay process of -- exchanging Link Code Word (FLP). -+ exchanging Link Code Word (FLP). - --VERSION 1.2 <2002/11/30> -+RTL8169_VERSION "1.2" <2003/6/17> -+ Update driver module name. -+ Modify ISR. -+ Add chip mcfg. -+ -+RTL8169_VERSION "1.3" <2003/6/20> -+ Add chip pcfg. -+ Add priv->phy_timer_t, rtl8169_phy_timer_t_handler() -+ Add rtl8169_hw_PHY_config() -+ Add rtl8169_hw_PHY_reset() -+ -+RTL8169_VERSION "1.4" <2003/7/14> -+ Add tx_bytes, rx_bytes. -+ -+RTL8169_VERSION "1.5" <2003/7/18> -+ Set 0x0000 to PHY at offset 0x0b. -+ Modify chip mcfg, pcfg -+ Force media for multiple card. -+RTL8169_VERSION "1.6" <2003/8/25> -+ Modify receive data buffer. -+ -+RTL8169_VERSION "1.7" <2003/9/18> -+ Add Jumbo Frame support. -+ -+RTL8169_VERSION "1.8" <2003/10/21> -+ Performance and CPU Utilizaion Enhancement. -+ -+RTL8169_VERSION "1.9" <2003/12/29> -+ Enable Tx/Rx flow control. -+ -+RTL8169_VERSION "2.0" <2004/03/26> -+ Beta version. -+ Support for linux 2.6.x -+ -+RTL8169_VERSION "2.1" <2004/07/05> -+ Modify parameters. -+ -+RTL8169_VERSION "2.2" <2004/08/09> -+ Add.pci_dma_sync_single. -+ Add pci_alloc_consistent()/pci_free_consistent(). -+ Revise parameters. -+ Recognize our interrupt for linux 2.6.x. -+*/ - -- - Large style cleanup -- - Use ether_crc in stock kernel (linux/crc32.h) -- - Copy mc_filter setup code from 8139cp -- (includes an optimization, and avoids set_bit use) -- --VERSION 1.6LK <2004/04/14> -- -- - Merge of Realtek's version 1.6 -- - Conversion to DMA API -- - Suspend/resume -- - Endianness -- - Misc Rx/Tx bugs -- --VERSION 2.2LK <2005/01/25> -- -- - RX csum, TX csum/SG, TSO -- - VLAN -- - baby (< 7200) Jumbo frames support -- - Merge of Realtek's version 2.2 (new phy) -- */ - - #include <linux/module.h> --#include <linux/moduleparam.h> - #include <linux/pci.h> - #include <linux/netdevice.h> - #include <linux/etherdevice.h> - #include <linux/delay.h> --#include <linux/ethtool.h> --#include <linux/mii.h> --#include <linux/if_vlan.h> --#include <linux/crc32.h> --#include <linux/in.h> --#include <linux/ip.h> --#include <linux/tcp.h> -+#include <linux/version.h> -+ -+#include <linux/timer.h> - #include <linux/init.h> --#include <linux/dma-mapping.h> - --#include <asm/io.h> --#include <asm/irq.h> - --#define RTL8169_VERSION "2.2LK" --#define MODULENAME "r8169" -+#define RTL8169_VERSION "2.2" -+#define MODULENAME "RTL8169s/8110s" -+#define RTL8169_DRIVER_NAME MODULENAME " Gigabit Ethernet driver " RTL8169_VERSION - #define PFX MODULENAME ": " - -+ -+#undef RTL8169_DEBUG -+#undef RTL8169_JUMBO_FRAME_SUPPORT -+#undef RTL8169_HW_FLOW_CONTROL_SUPPORT -+ -+ -+#undef RTL8169_IOCTL_SUPPORT -+#undef RTL8169_DYNAMIC_CONTROL -+#define RTL8169_USE_IO -+ -+ - #ifdef RTL8169_DEBUG --#define assert(expr) \ -- if(!(expr)) { \ -- printk( "Assertion failed! %s,%s,%s,line=%d\n", \ -- #expr,__FILE__,__FUNCTION__,__LINE__); \ -- } --#define dprintk(fmt, args...) do { printk(PFX fmt, ## args); } while (0) --#else --#define assert(expr) do {} while (0) --#define dprintk(fmt, args...) do {} while (0) --#endif /* RTL8169_DEBUG */ -- --#define TX_BUFFS_AVAIL(tp) \ -- (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1) -- --#ifdef CONFIG_R8169_NAPI --#define rtl8169_rx_skb netif_receive_skb --#define rtl8169_rx_hwaccel_skb vlan_hwaccel_rx --#define rtl8169_rx_quota(count, quota) min(count, quota) -+ #define assert(expr) \ -+ if(!(expr)) { printk( "Assertion failed! %s,%s,%s,line=%d\n", #expr,__FILE__,__FUNCTION__,__LINE__); } -+ #define DBG_PRINT( fmt, args...) printk("r8169: " fmt, ## args); - #else --#define rtl8169_rx_skb netif_rx --#define rtl8169_rx_hwaccel_skb vlan_hwaccel_receive_skb --#define rtl8169_rx_quota(count, quota) count --#endif -+ #define assert(expr) do {} while (0) -+ #define DBG_PRINT( fmt, args...) ; -+#endif // end of #ifdef RTL8169_DEBUG -+ - - /* media options */ - #define MAX_UNITS 8 --static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 }; --static int num_media = 0; -+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; - - /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ - static int max_interrupt_work = 20; - - /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). -- The RTL chips use a 64 element hash table based on the Ethernet CRC. */ -+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */ - static int multicast_filter_limit = 32; - --/* MAC address length */ --#define MAC_ADDR_LEN 6 -+/* MAC address length*/ -+#define MAC_ADDR_LEN 6 -+ -+#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */ -+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ -+#define TX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ -+#define ETTh 0x3F /* 0x3F means NO threshold */ -+ -+#define ETH_HDR_LEN 14 -+#define DEFAULT_MTU 1500 -+#define DEFAULT_RX_BUF_LEN 1536 -+ -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+#define MAX_JUMBO_FRAME_MTU ( 10000 ) -+#define MAX_RX_SKBDATA_SIZE ( MAX_JUMBO_FRAME_MTU + ETH_HDR_LEN ) -+#else -+#define MAX_RX_SKBDATA_SIZE 1600 -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+ -+#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ - --#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */ --#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ --#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ --#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */ --#define RxPacketMaxSize 0x3FE8 /* 16K - 1 - ETH_HLEN - VLAN - CRC... */ --#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */ --#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ -- --#define R8169_REGS_SIZE 256 --#define R8169_NAPI_WEIGHT 64 --#define NUM_TX_DESC 64 /* Number of Tx descriptor registers */ --#define NUM_RX_DESC 256 /* Number of Rx descriptor registers */ --#define RX_BUF_SIZE 1536 /* Rx Buffer size */ --#define R8169_TX_RING_BYTES (NUM_TX_DESC * sizeof(struct TxDesc)) --#define R8169_RX_RING_BYTES (NUM_RX_DESC * sizeof(struct RxDesc)) -+#define NUM_TX_DESC 64 /* Number of Tx descriptor registers*/ -+#define NUM_RX_DESC 64 /* Number of Rx descriptor registers*/ - --#define RTL8169_TX_TIMEOUT (6*HZ) --#define RTL8169_PHY_TIMEOUT (10*HZ) - -+#define RTL_MIN_IO_SIZE 0x80 -+#define TX_TIMEOUT (6*HZ) -+#define RTL8169_TIMER_EXPIRE_TIME 100 //100 -+ -+ -+#ifdef RTL8169_USE_IO -+#define RTL_W8(reg, val8) outb ((val8), ioaddr + (reg)) -+#define RTL_W16(reg, val16) outw ((val16), ioaddr + (reg)) -+#define RTL_W32(reg, val32) outl ((val32), ioaddr + (reg)) -+#define RTL_R8(reg) inb (ioaddr + (reg)) -+#define RTL_R16(reg) inw (ioaddr + (reg)) -+#define RTL_R32(reg) ((unsigned long) inl (ioaddr + (reg))) -+#else - /* write/read MMIO register */ --#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) --#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) --#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) --#define RTL_R8(reg) readb (ioaddr + (reg)) --#define RTL_R16(reg) readw (ioaddr + (reg)) --#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg))) -- --enum mac_version { -- RTL_GIGA_MAC_VER_B = 0x00, -- /* RTL_GIGA_MAC_VER_C = 0x03, */ -- RTL_GIGA_MAC_VER_D = 0x01, -- RTL_GIGA_MAC_VER_E = 0x02, -- RTL_GIGA_MAC_VER_X = 0x04 /* Greater than RTL_GIGA_MAC_VER_E */ --}; -+#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) -+#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) -+#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) -+#define RTL_R8(reg) readb (ioaddr + (reg)) -+#define RTL_R16(reg) readw (ioaddr + (reg)) -+#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg))) -+#endif - --enum phy_version { -- RTL_GIGA_PHY_VER_C = 0x03, /* PHY Reg 0x03 bit0-3 == 0x0000 */ -- RTL_GIGA_PHY_VER_D = 0x04, /* PHY Reg 0x03 bit0-3 == 0x0000 */ -- RTL_GIGA_PHY_VER_E = 0x05, /* PHY Reg 0x03 bit0-3 == 0x0000 */ -- RTL_GIGA_PHY_VER_F = 0x06, /* PHY Reg 0x03 bit0-3 == 0x0001 */ -- RTL_GIGA_PHY_VER_G = 0x07, /* PHY Reg 0x03 bit0-3 == 0x0002 */ -- RTL_GIGA_PHY_VER_H = 0x08, /* PHY Reg 0x03 bit0-3 == 0x0003 */ --}; -+#define MCFG_METHOD_1 0x01 -+#define MCFG_METHOD_2 0x02 -+#define MCFG_METHOD_3 0x03 -+#define MCFG_METHOD_4 0x04 -+ -+#define PCFG_METHOD_1 0x01 //PHY Reg 0x03 bit0-3 == 0x0000 -+#define PCFG_METHOD_2 0x02 //PHY Reg 0x03 bit0-3 == 0x0001 -+#define PCFG_METHOD_3 0x03 //PHY Reg 0x03 bit0-3 == 0x0002 - - --#define _R(NAME,MAC,MASK) \ -- { .name = NAME, .mac_version = MAC, .RxConfigMask = MASK } -+#ifdef RTL8169_DYNAMIC_CONTROL -+#include "r8169_callback.h" -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ - - const static struct { - const char *name; -- u8 mac_version; -- u32 RxConfigMask; /* Clears the bits supported by this chip */ -+ u8 mcfg; /* depend on RTL8169 docs */ -+ u32 RxConfigMask; /* should clear the bits supported by this chip */ - } rtl_chip_info[] = { -- _R("RTL8169", RTL_GIGA_MAC_VER_B, 0xff7e1880), -- _R("RTL8169s/8110s", RTL_GIGA_MAC_VER_D, 0xff7e1880), -- _R("RTL8169s/8110s", RTL_GIGA_MAC_VER_E, 0xff7e1880), -- _R("RTL8169s/8110s", RTL_GIGA_MAC_VER_X, 0xff7e1880), -+ { "RTL8169", MCFG_METHOD_1, 0xff7e1880 }, -+ { "RTL8169s/8110s", MCFG_METHOD_2, 0xff7e1880 }, -+ { "RTL8169s/8110s", MCFG_METHOD_3, 0xff7e1880 }, - }; --#undef _R - --static struct pci_device_id rtl8169_pci_tbl[] = { -- {0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, -- {0x1186, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, -+ -+static struct pci_device_id rtl8169_pci_tbl[] __devinitdata = { -+ { 0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -+#ifdef CONFIG_IOMEGA8241 -+ /* The 8169 without an i2c defaults to reporting as an 8129 */ -+ { 0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -+#endif /* CONFIG_IOMEGA8241 */ - {0,}, - }; - --MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl); - --static int rx_copybreak = 200; --static int use_dac; -+MODULE_DEVICE_TABLE (pci, rtl8169_pci_tbl); -+ - - enum RTL8169_registers { -- MAC0 = 0, /* Ethernet hardware address. */ -- MAR0 = 8, /* Multicast filter. */ -- TxDescStartAddrLow = 0x20, -- TxDescStartAddrHigh = 0x24, -- TxHDescStartAddrLow = 0x28, -- TxHDescStartAddrHigh = 0x2c, -- FLASH = 0x30, -- ERSR = 0x36, -- ChipCmd = 0x37, -- TxPoll = 0x38, -+ MAC0 = 0x0, -+ MAR0 = 0x8, -+ TxDescStartAddr = 0x20, -+ TxHDescStartAddr= 0x28, -+ FLASH = 0x30, -+ ERSR = 0x36, -+ ChipCmd = 0x37, -+ TxPoll = 0x38, - IntrMask = 0x3C, - IntrStatus = 0x3E, - TxConfig = 0x40, - RxConfig = 0x44, - RxMissed = 0x4C, - Cfg9346 = 0x50, -- Config0 = 0x51, -- Config1 = 0x52, -- Config2 = 0x53, -- Config3 = 0x54, -- Config4 = 0x55, -- Config5 = 0x56, -+ Config0 = 0x51, -+ Config1 = 0x52, -+ Config2 = 0x53, -+ Config3 = 0x54, -+ Config4 = 0x55, -+ Config5 = 0x56, - MultiIntr = 0x5C, -- PHYAR = 0x60, -- TBICSR = 0x64, -+ PHYAR = 0x60, -+ TBICSR = 0x64, - TBI_ANAR = 0x68, - TBI_LPAR = 0x6A, - PHYstatus = 0x6C, - RxMaxSize = 0xDA, - CPlusCmd = 0xE0, -- IntrMitigate = 0xE2, -- RxDescAddrLow = 0xE4, -- RxDescAddrHigh = 0xE8, -- EarlyTxThres = 0xEC, -- FuncEvent = 0xF0, -- FuncEventMask = 0xF4, -- FuncPresetState = 0xF8, -- FuncForceEvent = 0xFC, -+ RxDescStartAddr = 0xE4, -+ ETThReg = 0xEC, -+ FuncEvent = 0xF0, -+ FuncEventMask = 0xF4, -+ FuncPresetState = 0xF8, -+ FuncForceEvent = 0xFC, - }; - - enum RTL8169_register_content { -- /* InterruptStatusBits */ -- SYSErr = 0x8000, -- PCSTimeout = 0x4000, -- SWInt = 0x0100, -- TxDescUnavail = 0x80, -- RxFIFOOver = 0x40, -- LinkChg = 0x20, -- RxOverflow = 0x10, -- TxErr = 0x08, -- TxOK = 0x04, -- RxErr = 0x02, -- RxOK = 0x01, -+ /*InterruptStatusBits*/ -+ SYSErr = 0x8000, -+ PCSTimeout = 0x4000, -+ SWInt = 0x0100, -+ TxDescUnavail = 0x80, -+ RxFIFOOver = 0x40, -+ LinkChg = 0x20, -+ RxOverflow = 0x10, -+ TxErr = 0x08, -+ TxOK = 0x04, -+ RxErr = 0x02, -+ RxOK = 0x01, - -- /* RxStatusDesc */ -+ /*RxStatusDesc*/ - RxRES = 0x00200000, - RxCRC = 0x00080000, -- RxRUNT = 0x00100000, -+ RxRUNT= 0x00100000, - RxRWT = 0x00400000, - -- /* ChipCmdBits */ -+ /*ChipCmdBits*/ - CmdReset = 0x10, - CmdRxEnb = 0x08, - CmdTxEnb = 0x04, - RxBufEmpty = 0x01, - -- /* Cfg9346Bits */ -+ /*Cfg9346Bits*/ - Cfg9346_Lock = 0x00, - Cfg9346_Unlock = 0xC0, - -- /* rx_mode_bits */ -+ /*rx_mode_bits*/ - AcceptErr = 0x20, - AcceptRunt = 0x10, - AcceptBroadcast = 0x08, -@@ -263,2280 +270,1646 @@ - AcceptMyPhys = 0x02, - AcceptAllPhys = 0x01, - -- /* RxConfigBits */ -+ /*RxConfigBits*/ - RxCfgFIFOShift = 13, - RxCfgDMAShift = 8, - -- /* TxConfigBits */ -+ /*TxConfigBits*/ - TxInterFrameGapShift = 24, -- TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */ -+ TxDMAShift = 8, - -- /* TBICSR p.28 */ -- TBIReset = 0x80000000, -- TBILoopback = 0x40000000, -- TBINwEnable = 0x20000000, -- TBINwRestart = 0x10000000, -- TBILinkOk = 0x02000000, -- TBINwComplete = 0x01000000, -- -- /* CPlusCmd p.31 */ -- RxVlan = (1 << 6), -- RxChkSum = (1 << 5), -- PCIDAC = (1 << 4), -- PCIMulRW = (1 << 3), -- -- /* rtl8169_PHYstatus */ -- TBI_Enable = 0x80, -- TxFlowCtrl = 0x40, -- RxFlowCtrl = 0x20, -- _1000bpsF = 0x10, -- _100bps = 0x08, -- _10bps = 0x04, -- LinkStatus = 0x02, -- FullDup = 0x01, -+ /*rtl8169_PHYstatus*/ -+ TBI_Enable = 0x80, -+ TxFlowCtrl = 0x40, -+ RxFlowCtrl = 0x20, -+ _1000bpsF = 0x10, -+ _100bps = 0x08, -+ _10bps = 0x04, -+ LinkStatus = 0x02, -+ FullDup = 0x01, - -- /* GIGABIT_PHY_registers */ -+ /*GIGABIT_PHY_registers*/ - PHY_CTRL_REG = 0, - PHY_STAT_REG = 1, - PHY_AUTO_NEGO_REG = 4, - PHY_1000_CTRL_REG = 9, - -- /* GIGABIT_PHY_REG_BIT */ -- PHY_Restart_Auto_Nego = 0x0200, -- PHY_Enable_Auto_Nego = 0x1000, -- -- /* PHY_STAT_REG = 1 */ -- PHY_Auto_Neco_Comp = 0x0020, -- -- /* PHY_AUTO_NEGO_REG = 4 */ -- PHY_Cap_10_Half = 0x0020, -- PHY_Cap_10_Full = 0x0040, -- PHY_Cap_100_Half = 0x0080, -- PHY_Cap_100_Full = 0x0100, -- -- /* PHY_1000_CTRL_REG = 9 */ -- PHY_Cap_1000_Full = 0x0200, -- -- PHY_Cap_Null = 0x0, -- -- /* _MediaType */ -- _10_Half = 0x01, -- _10_Full = 0x02, -- _100_Half = 0x04, -- _100_Full = 0x08, -- _1000_Full = 0x10, -+ /*GIGABIT_PHY_REG_BIT*/ -+ PHY_Restart_Auto_Nego = 0x0200, -+ PHY_Enable_Auto_Nego = 0x1000, -+ -+ //PHY_STAT_REG = 1; -+ PHY_Auto_Neco_Comp = 0x0020, -+ -+ //PHY_AUTO_NEGO_REG = 4; -+ PHY_Cap_10_Half = 0x0020, -+ PHY_Cap_10_Full = 0x0040, -+ PHY_Cap_100_Half = 0x0080, -+ PHY_Cap_100_Full = 0x0100, -+ -+ //PHY_1000_CTRL_REG = 9; -+ PHY_Cap_1000_Full = 0x0200, -+ -+ PHY_Cap_PAUSE = 0x0400, -+ PHY_Cap_ASYM_PAUSE = 0x0800, -+ -+ PHY_Cap_Null = 0x0, -+ -+ /*_MediaType*/ -+ _10_Half = 0x01, -+ _10_Full = 0x02, -+ _100_Half = 0x04, -+ _100_Full = 0x08, -+ _1000_Full = 0x10, - -- /* _TBICSRBit */ -- TBILinkOK = 0x02000000, -+ /*_TBICSRBit*/ -+ TBILinkOK = 0x02000000, - }; - -+ -+ - enum _DescStatusBit { -- DescOwn = (1 << 31), /* Descriptor is owned by NIC */ -- RingEnd = (1 << 30), /* End of descriptor ring */ -- FirstFrag = (1 << 29), /* First segment of a packet */ -- LastFrag = (1 << 28), /* Final segment of a packet */ -- -- /* Tx private */ -- LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */ -- MSSShift = 16, /* MSS value position */ -- MSSMask = 0xfff, /* MSS value + LargeSend bit: 12 bits */ -- IPCS = (1 << 18), /* Calculate IP checksum */ -- UDPCS = (1 << 17), /* Calculate UDP/IP checksum */ -- TCPCS = (1 << 16), /* Calculate TCP/IP checksum */ -- TxVlanTag = (1 << 17), /* Add VLAN tag */ -- -- /* Rx private */ -- PID1 = (1 << 18), /* Protocol ID bit 1/2 */ -- PID0 = (1 << 17), /* Protocol ID bit 2/2 */ -- --#define RxProtoUDP (PID1) --#define RxProtoTCP (PID0) --#define RxProtoIP (PID1 | PID0) --#define RxProtoMask RxProtoIP -- -- IPFail = (1 << 16), /* IP checksum failed */ -- UDPFail = (1 << 15), /* UDP/IP checksum failed */ -- TCPFail = (1 << 14), /* TCP/IP checksum failed */ -- RxVlanTag = (1 << 16), /* VLAN tag available */ -+ OWNbit = 0x80000000, -+ EORbit = 0x40000000, -+ FSbit = 0x20000000, -+ LSbit = 0x10000000, - }; - --#define RsvdMask 0x3fffc000 - - struct TxDesc { -- u32 opts1; -- u32 opts2; -- u64 addr; -+ u32 status; -+ u32 vlan_tag; -+ u32 buf_addr; -+ u32 buf_Haddr; - }; - - struct RxDesc { -- u32 opts1; -- u32 opts2; -- u64 addr; -+ u32 status; -+ u32 vlan_tag; -+ u32 buf_addr; -+ u32 buf_Haddr; - }; - --struct ring_info { -- struct sk_buff *skb; -- u32 len; -- u8 __pad[sizeof(void *) - sizeof(u32)]; --}; -+ -+typedef struct timer_list rt_timer_t; -+ - - struct rtl8169_private { -- void __iomem *mmio_addr; /* memory map physical address */ -- struct pci_dev *pci_dev; /* Index of PCI device */ -- struct net_device_stats stats; /* statistics of net device */ -- spinlock_t lock; /* spin lock flag */ -+ unsigned long ioaddr; /* memory map physical address*/ -+ struct pci_dev *pci_dev; /* Index of PCI device */ -+ struct net_device_stats stats; /* statistics of net device */ -+ spinlock_t lock; /* spin lock flag */ - int chipset; -- int mac_version; -- int phy_version; -- u32 cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ -- u32 cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */ -- u32 dirty_rx; -- u32 dirty_tx; -- struct TxDesc *TxDescArray; /* 256-aligned Tx descriptor ring */ -- struct RxDesc *RxDescArray; /* 256-aligned Rx descriptor ring */ -- dma_addr_t TxPhyAddr; -- dma_addr_t RxPhyAddr; -- struct sk_buff *Rx_skbuff[NUM_RX_DESC]; /* Rx data buffers */ -- struct ring_info tx_skb[NUM_TX_DESC]; /* Tx data buffers */ -- unsigned rx_buf_sz; -- struct timer_list timer; -- u16 cp_cmd; -- u16 intr_mask; -- int phy_auto_nego_reg; -- int phy_1000_ctrl_reg; --#ifdef CONFIG_R8169_VLAN -- struct vlan_group *vlgrp; --#endif -- int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex); -- void (*get_settings)(struct net_device *, struct ethtool_cmd *); -- void (*phy_reset_enable)(void __iomem *); -- unsigned int (*phy_reset_pending)(void __iomem *); -- unsigned int (*link_ok)(void __iomem *); -- struct work_struct task; -+ int mcfg; -+ int pcfg; -+ rt_timer_t r8169_timer; -+ unsigned long expire_time; -+ -+ unsigned long phy_link_down_cnt; -+ unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ -+ unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */ -+ unsigned long dirty_tx; -+ struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */ -+ struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */ -+ struct sk_buff *Tx_skbuff[NUM_TX_DESC];/* Index of Transmit data buffer */ -+ struct sk_buff *Rx_skbuff[NUM_RX_DESC];/* Receive data buffer */ -+ unsigned char drvinit_fail; -+ -+ dma_addr_t txdesc_array_dma_addr[NUM_TX_DESC]; -+ dma_addr_t rxdesc_array_dma_addr[NUM_RX_DESC]; -+ dma_addr_t rx_skbuff_dma_addr[NUM_RX_DESC]; -+ -+ void *txdesc_space; -+ dma_addr_t txdesc_phy_dma_addr; -+ int sizeof_txdesc_space; -+ -+ void *rxdesc_space; -+ dma_addr_t rxdesc_phy_dma_addr; -+ int sizeof_rxdesc_space; -+ -+ int curr_mtu_size; -+ int tx_pkt_len; -+ int rx_pkt_len; -+ -+ int hw_rx_pkt_len; -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ struct r8169_cb_t rt; -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ unsigned char linkstatus; - }; - --MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>"); --MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); --module_param_array(media, int, &num_media, 0); --module_param(rx_copybreak, int, 0); --module_param(use_dac, int, 0); --MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot."); -+ -+MODULE_AUTHOR ("Realtek"); -+MODULE_DESCRIPTION ("RealTek RTL-8169 Gigabit Ethernet driver"); -+MODULE_PARM (media, "1-" __MODULE_STRING(MAX_UNITS) "i"); - MODULE_LICENSE("GPL"); --MODULE_VERSION(RTL8169_VERSION); - --static int rtl8169_open(struct net_device *dev); --static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev); --static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance, -- struct pt_regs *regs); --static int rtl8169_init_ring(struct net_device *dev); --static void rtl8169_hw_start(struct net_device *dev); --static int rtl8169_close(struct net_device *dev); --static void rtl8169_set_rx_mode(struct net_device *dev); --static void rtl8169_tx_timeout(struct net_device *dev); --static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev); --static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *, -- void __iomem *); --static int rtl8169_change_mtu(struct net_device *netdev, int new_mtu); --static void rtl8169_down(struct net_device *dev); - --#ifdef CONFIG_R8169_NAPI --static int rtl8169_poll(struct net_device *dev, int *budget); -+static int rtl8169_open (struct net_device *dev); -+static int rtl8169_start_xmit (struct sk_buff *skb, struct net_device *dev); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+typedef int irqreturn_t; -+#define IRQ_NONE 0 -+#define IRQ_HANDLED 1 -+static void rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -+#else -+static irqreturn_t rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs); - #endif - --static const u16 rtl8169_intr_mask = -- SYSErr | LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK; --static const u16 rtl8169_napi_event = -- RxOK | RxOverflow | RxFIFOOver | TxOK | TxErr; --static const unsigned int rtl8169_rx_config = -- (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift); -- --#define PHY_Cap_10_Half_Or_Less PHY_Cap_10_Half --#define PHY_Cap_10_Full_Or_Less PHY_Cap_10_Full | PHY_Cap_10_Half_Or_Less --#define PHY_Cap_100_Half_Or_Less PHY_Cap_100_Half | PHY_Cap_10_Full_Or_Less --#define PHY_Cap_100_Full_Or_Less PHY_Cap_100_Full | PHY_Cap_100_Half_Or_Less -+static void rtl8169_init_ring (struct net_device *dev); -+static void rtl8169_hw_start (struct net_device *dev); -+static int rtl8169_close (struct net_device *dev); -+static inline u32 ether_crc (int length, unsigned char *data); -+static void rtl8169_set_rx_mode (struct net_device *dev); -+static void rtl8169_tx_timeout (struct net_device *dev); -+static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev); -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu); -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+static void rtl8169_hw_PHY_config (struct net_device *dev); -+static void rtl8169_hw_PHY_reset(struct net_device *dev); -+static const u16 rtl8169_intr_mask = LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK ; -+static const unsigned int rtl8169_rx_config = (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift) | 0x0000000E; -+ -+ -+#define RTL8169_WRITE_GMII_REG_BIT( ioaddr, reg, bitnum, bitval )\ -+{ \ -+ int val; \ -+ if( bitval == 1 ){ val = ( RTL8169_READ_GMII_REG( ioaddr, reg ) | (bitval<<bitnum) ) & 0xffff ; } \ -+ else{ val = ( RTL8169_READ_GMII_REG( ioaddr, reg ) & (~(0x0001<<bitnum)) ) & 0xffff ; } \ -+ RTL8169_WRITE_GMII_REG( ioaddr, reg, val ); \ -+} -+ -+ -+ -+#ifdef RTL8169_DEBUG -+unsigned alloc_rxskb_cnt = 0; -+#define RTL8169_ALLOC_RXSKB(bufsize) dev_alloc_skb(bufsize); alloc_rxskb_cnt ++ ; -+#define RTL8169_FREE_RXSKB(skb) kfree_skb(skb); alloc_rxskb_cnt -- ; -+#define RTL8169_NETIF_RX(skb) netif_rx(skb); alloc_rxskb_cnt -- ; -+#else -+#define RTL8169_ALLOC_RXSKB(bufsize) dev_alloc_skb(bufsize); -+#define RTL8169_FREE_RXSKB(skb) kfree_skb(skb); -+#define RTL8169_NETIF_RX(skb) netif_rx(skb); -+#endif //end #ifdef RTL8169_DEBUG -+ -+ -+ - --static void mdio_write(void __iomem *ioaddr, int RegAddr, int value) -+ -+ -+//================================================================= -+// PHYAR -+// bit Symbol -+// 31 Flag -+// 30-21 reserved -+// 20-16 5-bit GMII/MII register address -+// 15-0 16-bit GMII/MII register data -+//================================================================= -+void RTL8169_WRITE_GMII_REG( unsigned long ioaddr, int RegAddr, int value ) - { -- int i; -+ int i; - -- RTL_W32(PHYAR, 0x80000000 | (RegAddr & 0xFF) << 16 | value); -+ RTL_W32 ( PHYAR, 0x80000000 | (RegAddr&0xFF)<<16 | value); - udelay(1000); - -- for (i = 2000; i > 0; i--) { -- /* Check if the RTL8169 has completed writing to the specified MII register */ -- if (!(RTL_R32(PHYAR) & 0x80000000)) -+ for( i = 2000; i > 0 ; i -- ){ -+ // Check if the RTL8169 has completed writing to the specified MII register -+ if( ! (RTL_R32(PHYAR)&0x80000000) ){ - break; -- udelay(100); -- } -+ } -+ else{ -+ udelay(100); -+ }// end of if( ! (RTL_R32(PHYAR)&0x80000000) ) -+ }// end of for() loop - } -- --static int mdio_read(void __iomem *ioaddr, int RegAddr) -+//================================================================= -+int RTL8169_READ_GMII_REG( unsigned long ioaddr, int RegAddr ) - { - int i, value = -1; - -- RTL_W32(PHYAR, 0x0 | (RegAddr & 0xFF) << 16); -+ RTL_W32 ( PHYAR, 0x0 | (RegAddr&0xFF)<<16 ); - udelay(1000); - -- for (i = 2000; i > 0; i--) { -- /* Check if the RTL8169 has completed retrieving data from the specified MII register */ -- if (RTL_R32(PHYAR) & 0x80000000) { -- value = (int) (RTL_R32(PHYAR) & 0xFFFF); -+ for( i = 2000; i > 0 ; i -- ){ -+ // Check if the RTL8169 has completed retrieving data from the specified MII register -+ if( RTL_R32(PHYAR) & 0x80000000 ){ -+ value = (int)( RTL_R32(PHYAR)&0xFFFF ); - break; - } -- udelay(100); -- } -+ else{ -+ udelay(100); -+ }// end of if( RTL_R32(PHYAR) & 0x80000000 ) -+ }// end of for() loop - return value; - } - --static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr) --{ -- RTL_W16(IntrMask, 0x0000); - -- RTL_W16(IntrStatus, 0xffff); --} -+#ifdef RTL8169_IOCTL_SUPPORT -+#include "r8169_ioctl.c" -+#endif //end #ifdef RTL8169_IOCTL_SUPPORT - --static void rtl8169_asic_down(void __iomem *ioaddr) --{ -- RTL_W8(ChipCmd, 0x00); -- rtl8169_irq_mask_and_ack(ioaddr); -- RTL_R16(CPlusCmd); --} - --static unsigned int rtl8169_tbi_reset_pending(void __iomem *ioaddr) --{ -- return RTL_R32(TBICSR) & TBIReset; --} -+#ifdef RTL8169_DYNAMIC_CONTROL -+#include "r8169_callback.c" -+#endif - --static unsigned int rtl8169_xmii_reset_pending(void __iomem *ioaddr) --{ -- return mdio_read(ioaddr, 0) & 0x8000; --} - --static unsigned int rtl8169_tbi_link_ok(void __iomem *ioaddr) --{ -- return RTL_R32(TBICSR) & TBILinkOk; -+ -+#define rtl8169_request_timer( timer, timer_expires, timer_func, timer_data ) \ -+{ \ -+ init_timer(timer); \ -+ timer->expires = (unsigned long)(jiffies + timer_expires); \ -+ timer->data = (unsigned long)(timer_data); \ -+ timer->function = (void *)(timer_func); \ -+ add_timer(timer); \ -+ DBG_PRINT("request_timer at 0x%08lx\n", (unsigned long)timer); \ - } - --static unsigned int rtl8169_xmii_link_ok(void __iomem *ioaddr) --{ -- return RTL_R8(PHYstatus) & LinkStatus; -+#define rtl8169_delete_timer( del_timer_t ) \ -+{ \ -+ del_timer(del_timer_t); \ -+ DBG_PRINT("delete_timer at 0x%08lx\n", (unsigned long)del_timer_t); \ - } - --static void rtl8169_tbi_reset_enable(void __iomem *ioaddr) --{ -- RTL_W32(TBICSR, RTL_R32(TBICSR) | TBIReset); -+#define rtl8169_mod_timer( timer, timer_expires ) \ -+{ \ -+ mod_timer( timer, jiffies + timer_expires ); \ - } - --static void rtl8169_xmii_reset_enable(void __iomem *ioaddr) --{ -- unsigned int val; - -- val = (mdio_read(ioaddr, PHY_CTRL_REG) | 0x8000) & 0xffff; -- mdio_write(ioaddr, PHY_CTRL_REG, val); --} - --static void rtl8169_check_link_status(struct net_device *dev, -- struct rtl8169_private *tp, void __iomem *ioaddr) --{ -- unsigned long flags; - -- spin_lock_irqsave(&tp->lock, flags); -- if (tp->link_ok(ioaddr)) { -- netif_carrier_on(dev); -- printk(KERN_INFO PFX "%s: link up\n", dev->name); -- } else -- netif_carrier_off(dev); -- spin_unlock_irqrestore(&tp->lock, flags); --} -- --static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex) --{ -- struct { -- u16 speed; -- u8 duplex; -- u8 autoneg; -- u8 media; -- } link_settings[] = { -- { SPEED_10, DUPLEX_HALF, AUTONEG_DISABLE, _10_Half }, -- { SPEED_10, DUPLEX_FULL, AUTONEG_DISABLE, _10_Full }, -- { SPEED_100, DUPLEX_HALF, AUTONEG_DISABLE, _100_Half }, -- { SPEED_100, DUPLEX_FULL, AUTONEG_DISABLE, _100_Full }, -- { SPEED_1000, DUPLEX_FULL, AUTONEG_DISABLE, _1000_Full }, -- /* Make TBI happy */ -- { SPEED_1000, DUPLEX_FULL, AUTONEG_ENABLE, 0xff } -- }, *p; -- unsigned char option; -- -- option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff; -+//====================================================================================================== -+//====================================================================================================== -+void rtl8169_phy_timer_t_handler( void *timer_data ) -+{ -+ struct net_device *dev = (struct net_device *)timer_data; -+ struct rtl8169_private *priv = (struct rtl8169_private *) (dev->priv); -+ unsigned long ioaddr = priv->ioaddr; - -- if ((option != 0xff) && !idx) -- printk(KERN_WARNING PFX "media option is deprecated.\n"); -+ assert( priv->mcfg > MCFG_METHOD_1 ); -+ assert( priv->pcfg < PCFG_METHOD_3 ); - -- for (p = link_settings; p->media != 0xff; p++) { -- if (p->media == option) -- break; -+ if( RTL_R8(PHYstatus) & LinkStatus ){ -+ priv->phy_link_down_cnt = 0 ; - } -- *autoneg = p->autoneg; -- *speed = p->speed; -- *duplex = p->duplex; --} -+ else{ -+ priv->phy_link_down_cnt ++ ; -+ if( priv->phy_link_down_cnt >= 12 ){ -+ // If link on 1000, perform phy reset. -+ if( RTL8169_READ_GMII_REG( ioaddr, PHY_1000_CTRL_REG ) & PHY_Cap_1000_Full ) -+ { -+ DBG_PRINT("rtl8169_hw_PHY_reset\n"); -+ rtl8169_hw_PHY_reset( dev ); -+ } - --static void rtl8169_get_drvinfo(struct net_device *dev, -- struct ethtool_drvinfo *info) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -+ priv->phy_link_down_cnt = 0 ; -+ } -+ } - -- strcpy(info->driver, MODULENAME); -- strcpy(info->version, RTL8169_VERSION); -- strcpy(info->bus_info, pci_name(tp->pci_dev)); -+ //--------------------------------------------------------------------------- -+ //mod_timer is a more efficient way to update the expire field of an active timer. -+ //--------------------------------------------------------------------------- -+// rtl8169_mod_timer( (&priv->phy_timer_t), 100 ); - } - --static int rtl8169_get_regs_len(struct net_device *dev) --{ -- return R8169_REGS_SIZE; --} - --static int rtl8169_set_speed_tbi(struct net_device *dev, -- u8 autoneg, u16 speed, u8 duplex) -+ -+//====================================================================================================== -+//====================================================================================================== -+void rtl8169_timer_handler( void *timer_data ) - { -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- int ret = 0; -- u32 reg; -+ struct net_device *dev = (struct net_device *)timer_data; -+ struct rtl8169_private *priv = (struct rtl8169_private *) (dev->priv); - -- reg = RTL_R32(TBICSR); -- if ((autoneg == AUTONEG_DISABLE) && (speed == SPEED_1000) && -- (duplex == DUPLEX_FULL)) { -- RTL_W32(TBICSR, reg & ~(TBINwEnable | TBINwRestart)); -- } else if (autoneg == AUTONEG_ENABLE) -- RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart); -- else { -- printk(KERN_WARNING PFX -- "%s: incorrect speed setting refused in TBI mode\n", -- dev->name); -- ret = -EOPNOTSUPP; -+ if( (priv->mcfg > MCFG_METHOD_1) && (priv->pcfg < PCFG_METHOD_3) ){ -+ DBG_PRINT("FIX PCS -> rtl8169_phy_timer_t_handler\n"); -+ priv->phy_link_down_cnt = 0; -+ rtl8169_phy_timer_t_handler( timer_data ); - } - -- return ret; --} - --static int rtl8169_set_speed_xmii(struct net_device *dev, -- u8 autoneg, u16 speed, u8 duplex) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- int auto_nego, giga_ctrl; -+#ifdef RTL8169_DYNAMIC_CONTROL -+ { -+ struct r8169_cb_t *rt = &(priv->rt); -+ if( priv->linkstatus == _1000_Full ){ -+ r8169_callback(rt); -+ } -+ } -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL - -- auto_nego = mdio_read(ioaddr, PHY_AUTO_NEGO_REG); -- auto_nego &= ~(PHY_Cap_10_Half | PHY_Cap_10_Full | -- PHY_Cap_100_Half | PHY_Cap_100_Full); -- giga_ctrl = mdio_read(ioaddr, PHY_1000_CTRL_REG); -- giga_ctrl &= ~(PHY_Cap_1000_Full | PHY_Cap_Null); - -- if (autoneg == AUTONEG_ENABLE) { -- auto_nego |= (PHY_Cap_10_Half | PHY_Cap_10_Full | -- PHY_Cap_100_Half | PHY_Cap_100_Full); -- giga_ctrl |= PHY_Cap_1000_Full; -- } else { -- if (speed == SPEED_10) -- auto_nego |= PHY_Cap_10_Half | PHY_Cap_10_Full; -- else if (speed == SPEED_100) -- auto_nego |= PHY_Cap_100_Half | PHY_Cap_100_Full; -- else if (speed == SPEED_1000) -- giga_ctrl |= PHY_Cap_1000_Full; -- -- if (duplex == DUPLEX_HALF) -- auto_nego &= ~(PHY_Cap_10_Full | PHY_Cap_100_Full); -- } -- -- tp->phy_auto_nego_reg = auto_nego; -- tp->phy_1000_ctrl_reg = giga_ctrl; -- -- mdio_write(ioaddr, PHY_AUTO_NEGO_REG, auto_nego); -- mdio_write(ioaddr, PHY_1000_CTRL_REG, giga_ctrl); -- mdio_write(ioaddr, PHY_CTRL_REG, PHY_Enable_Auto_Nego | -- PHY_Restart_Auto_Nego); -- return 0; -+ rtl8169_mod_timer( (&priv->r8169_timer), priv->expire_time ); - } - --static int rtl8169_set_speed(struct net_device *dev, -- u8 autoneg, u16 speed, u8 duplex) -+ -+ -+//====================================================================================================== -+//====================================================================================================== -+static int __devinit rtl8169_init_board ( struct pci_dev *pdev, struct net_device **dev_out, unsigned long *ioaddr_out) - { -- struct rtl8169_private *tp = netdev_priv(dev); -- int ret; -+ unsigned long ioaddr = 0; -+ struct net_device *dev; -+ struct rtl8169_private *priv; -+ int rc, i; -+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; - -- ret = tp->set_speed(dev, autoneg, speed, duplex); - -- if (netif_running(dev) && (tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full)) -- mod_timer(&tp->timer, jiffies + RTL8169_PHY_TIMEOUT); -+ assert (pdev != NULL); -+ assert (ioaddr_out != NULL); - -- return ret; --} -+ *ioaddr_out = 0; -+ *dev_out = NULL; - --static int rtl8169_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- unsigned long flags; -- int ret; -+ // dev zeroed in init_etherdev -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ dev = init_etherdev (NULL, sizeof (*priv)); -+#else -+ dev = alloc_etherdev (sizeof (*priv)); -+#endif - -- spin_lock_irqsave(&tp->lock, flags); -- ret = rtl8169_set_speed(dev, cmd->autoneg, cmd->speed, cmd->duplex); -- spin_unlock_irqrestore(&tp->lock, flags); -- -- return ret; --} -+ if (dev == NULL) { -+ printk (KERN_ERR PFX "unable to alloc new ethernet\n"); -+ return -ENOMEM; -+ } - --static u32 rtl8169_get_rx_csum(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -+ SET_MODULE_OWNER(dev); - -- return tp->cp_cmd & RxChkSum; --} -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0) -+ SET_NETDEV_DEV(dev, &pdev->dev); -+#endif - --static int rtl8169_set_rx_csum(struct net_device *dev, u32 data) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- unsigned long flags; -+ priv = dev->priv; - -- spin_lock_irqsave(&tp->lock, flags); -+ // enable device (incl. PCI PM wakeup and hotplug setup) -+ rc = pci_enable_device (pdev); -+ if (rc) -+ goto err_out; - -- if (data) -- tp->cp_cmd |= RxChkSum; -- else -- tp->cp_cmd &= ~RxChkSum; -+ mmio_start = pci_resource_start (pdev, 1); -+ mmio_end = pci_resource_end (pdev, 1); -+ mmio_flags = pci_resource_flags (pdev, 1); -+ mmio_len = pci_resource_len (pdev, 1); -+ -+ // make sure PCI base addr 1 is MMIO -+ if (!(mmio_flags & IORESOURCE_MEM)) { -+ printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n"); -+ rc = -ENODEV; -+ goto err_out; -+ } - -- RTL_W16(CPlusCmd, tp->cp_cmd); -- RTL_R16(CPlusCmd); -+ // check for weird/broken PCI region reporting -+ if ( mmio_len < RTL_MIN_IO_SIZE ) { -+ printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); -+ rc = -ENODEV; -+ goto err_out; -+ } - -- spin_unlock_irqrestore(&tp->lock, flags); - -- return 0; --} -+ rc = pci_request_regions (pdev, dev->name); -+ if (rc) -+ goto err_out; - --#ifdef CONFIG_R8169_VLAN -+ // enable PCI bus-mastering -+ pci_set_master (pdev); - --static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp, -- struct sk_buff *skb) --{ -- return (tp->vlgrp && vlan_tx_tag_present(skb)) ? -- TxVlanTag | swab16(vlan_tx_tag_get(skb)) : 0x00; --} -+#ifdef RTL8169_USE_IO -+ ioaddr = pci_resource_start(pdev, 0); -+#else -+ // ioremap MMIO region -+ ioaddr = (unsigned long)ioremap (mmio_start, mmio_len); -+ if (ioaddr == 0) { -+ printk (KERN_ERR PFX "cannot remap MMIO, aborting\n"); -+ rc = -EIO; -+ goto err_out_free_res; -+ } -+#endif - --static void rtl8169_vlan_rx_register(struct net_device *dev, -- struct vlan_group *grp) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- unsigned long flags; -+ // Soft reset the chip. -+ RTL_W8 ( ChipCmd, CmdReset); - -- spin_lock_irqsave(&tp->lock, flags); -- tp->vlgrp = grp; -- if (tp->vlgrp) -- tp->cp_cmd |= RxVlan; -- else -- tp->cp_cmd &= ~RxVlan; -- RTL_W16(CPlusCmd, tp->cp_cmd); -- RTL_R16(CPlusCmd); -- spin_unlock_irqrestore(&tp->lock, flags); --} -+ // Check that the chip has finished the reset. -+ for (i = 1000; i > 0; i--){ -+ if ( (RTL_R8(ChipCmd) & CmdReset) == 0){ -+ break; -+ } -+ else{ -+ udelay (10); -+ } -+ } - --static void rtl8169_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- unsigned long flags; -+ // identify config method -+ { -+ unsigned long val32 = (RTL_R32(TxConfig)&0x7c800000); - -- spin_lock_irqsave(&tp->lock, flags); -- if (tp->vlgrp) -- tp->vlgrp->vlan_devices[vid] = NULL; -- spin_unlock_irqrestore(&tp->lock, flags); --} -+ if( val32 == (0x1<<28) ){ -+ priv->mcfg = MCFG_METHOD_4; -+ } -+ else if( val32 == (0x1<<26) ){ -+ priv->mcfg = MCFG_METHOD_3; -+ } -+ else if( val32 == (0x1<<23) ){ -+ priv->mcfg = MCFG_METHOD_2; -+ } -+ else if( val32 == 0x00000000 ){ -+ priv->mcfg = MCFG_METHOD_1; -+ } -+ else{ -+ priv->mcfg = MCFG_METHOD_1; -+ } -+ } -+ { -+ unsigned char val8 = (unsigned char)(RTL8169_READ_GMII_REG(ioaddr,3)&0x000f); -+ if( val8 == 0x00 ){ -+ priv->pcfg = PCFG_METHOD_1; -+ } -+ else if( val8 == 0x01 ){ -+ priv->pcfg = PCFG_METHOD_2; -+ } -+ else if( val8 == 0x02 ){ -+ priv->pcfg = PCFG_METHOD_3; -+ } -+ else{ -+ priv->pcfg = PCFG_METHOD_3; -+ } -+ } - --static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, -- struct sk_buff *skb) --{ -- u32 opts2 = le32_to_cpu(desc->opts2); -- int ret; - -- if (tp->vlgrp && (opts2 & RxVlanTag)) { -- rtl8169_rx_hwaccel_skb(skb, tp->vlgrp, -- swab16(opts2 & 0xffff)); -- ret = 0; -- } else -- ret = -1; -- desc->opts2 = 0; -- return ret; --} -+ for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--){ -+ if (priv->mcfg == rtl_chip_info[i].mcfg) { -+ priv->chipset = i; -+ goto match; -+ } -+ } - --#else /* !CONFIG_R8169_VLAN */ -+ //if unknown chip, assume array element #0, original RTL-8169 in this case -+ //printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8169\n", pdev->slot_name); -+ priv->chipset = 0; - --static inline u32 rtl8169_tx_vlan_tag(struct rtl8169_private *tp, -- struct sk_buff *skb) --{ -+match: -+ *ioaddr_out = ioaddr; -+ *dev_out = dev; - return 0; --} - --static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc, -- struct sk_buff *skb) --{ -- return -1; -+#ifndef RTL8169_USE_IO -+err_out_free_res: -+ pci_release_regions (pdev); -+#endif -+ -+err_out: -+ unregister_netdev (dev); -+ kfree (dev); -+ return rc; - } - --#endif - --static void rtl8169_gset_tbi(struct net_device *dev, struct ethtool_cmd *cmd) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- u32 status; - -- cmd->supported = -- SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_FIBRE; -- cmd->port = PORT_FIBRE; -- cmd->transceiver = XCVR_INTERNAL; - -- status = RTL_R32(TBICSR); -- cmd->advertising = (status & TBINwEnable) ? ADVERTISED_Autoneg : 0; -- cmd->autoneg = !!(status & TBINwEnable); - -- cmd->speed = SPEED_1000; -- cmd->duplex = DUPLEX_FULL; /* Always set */ --} - --static void rtl8169_gset_xmii(struct net_device *dev, struct ethtool_cmd *cmd) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- u8 status; - -- cmd->supported = SUPPORTED_10baseT_Half | -- SUPPORTED_10baseT_Full | -- SUPPORTED_100baseT_Half | -- SUPPORTED_100baseT_Full | -- SUPPORTED_1000baseT_Full | -- SUPPORTED_Autoneg | -- SUPPORTED_TP; -+//====================================================================================================== -+static int __devinit rtl8169_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -+{ -+ struct net_device *dev = NULL; -+ struct rtl8169_private *priv = NULL; -+ unsigned long ioaddr = 0; -+ static int board_idx = -1; -+ int i; -+ int option = -1, Cap10_100 = 0, Cap1000 = 0; - -- cmd->autoneg = 1; -- cmd->advertising = ADVERTISED_TP | ADVERTISED_Autoneg; - -- if (tp->phy_auto_nego_reg & PHY_Cap_10_Half) -- cmd->advertising |= ADVERTISED_10baseT_Half; -- if (tp->phy_auto_nego_reg & PHY_Cap_10_Full) -- cmd->advertising |= ADVERTISED_10baseT_Full; -- if (tp->phy_auto_nego_reg & PHY_Cap_100_Half) -- cmd->advertising |= ADVERTISED_100baseT_Half; -- if (tp->phy_auto_nego_reg & PHY_Cap_100_Full) -- cmd->advertising |= ADVERTISED_100baseT_Full; -- if (tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full) -- cmd->advertising |= ADVERTISED_1000baseT_Full; -+ assert (pdev != NULL); -+ assert (ent != NULL); - -- status = RTL_R8(PHYstatus); -+ board_idx++; - -- if (status & _1000bpsF) -- cmd->speed = SPEED_1000; -- else if (status & _100bps) -- cmd->speed = SPEED_100; -- else if (status & _10bps) -- cmd->speed = SPEED_10; - -- cmd->duplex = ((status & _1000bpsF) || (status & FullDup)) ? -- DUPLEX_FULL : DUPLEX_HALF; --} -+ i = rtl8169_init_board (pdev, &dev, &ioaddr); -+ if (i < 0) { -+ return i; -+ } - --static int rtl8169_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- unsigned long flags; -+ priv = dev->priv; - -- spin_lock_irqsave(&tp->lock, flags); -+ assert (ioaddr != NULL); -+ assert (dev != NULL); -+ assert (priv != NULL); - -- tp->get_settings(dev, cmd); -+ // Get MAC address // -+ for (i = 0; i < MAC_ADDR_LEN ; i++){ -+ dev->dev_addr[i] = RTL_R8( MAC0 + i ); -+ } - -- spin_unlock_irqrestore(&tp->lock, flags); -- return 0; --} -+ dev->open = rtl8169_open; -+ dev->hard_start_xmit = rtl8169_start_xmit; -+ dev->get_stats = rtl8169_get_stats; -+ dev->stop = rtl8169_close; -+ dev->tx_timeout = rtl8169_tx_timeout; -+ dev->set_multicast_list = rtl8169_set_rx_mode; -+ dev->watchdog_timeo = TX_TIMEOUT; -+ dev->irq = pdev->irq; -+ dev->base_addr = (unsigned long) ioaddr; -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ dev->change_mtu = rtl8169_change_mtu; -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+#ifdef RTL8169_IOCTL_SUPPORT -+ dev->do_ioctl = rtl8169_ioctl; -+#endif //end #ifdef RTL8169_IOCTL_SUPPORT -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ priv->rt.dev = dev; -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ priv = dev->priv; // private data // -+ priv->pci_dev = pdev; -+ priv->ioaddr = ioaddr; -+ -+//#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ priv->curr_mtu_size = dev->mtu; -+ priv->tx_pkt_len = dev->mtu + ETH_HDR_LEN; -+ priv->rx_pkt_len = dev->mtu + ETH_HDR_LEN; -+ priv->hw_rx_pkt_len = priv->rx_pkt_len + 8; -+//#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+ DBG_PRINT("-------------------------- \n"); -+ DBG_PRINT("dev->mtu = %d \n", dev->mtu); -+ DBG_PRINT("priv->curr_mtu_size = %d \n", priv->curr_mtu_size); -+ DBG_PRINT("priv->tx_pkt_len = %d \n", priv->tx_pkt_len); -+ DBG_PRINT("priv->rx_pkt_len = %d \n", priv->rx_pkt_len); -+ DBG_PRINT("priv->hw_rx_pkt_len = %d \n", priv->hw_rx_pkt_len); -+ DBG_PRINT("-------------------------- \n"); -+ -+ spin_lock_init (&priv->lock); -+ -+ register_netdev (dev); -+ -+ pci_set_drvdata(pdev, dev); // pdev->driver_data = data; -+ -+ -+ printk (KERN_DEBUG "%s: Identified chip type is '%s'.\n",dev->name,rtl_chip_info[priv->chipset].name); -+ printk (KERN_INFO "%s: %s at 0x%lx, " -+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " -+ "IRQ %d\n", -+ dev->name, -+ RTL8169_DRIVER_NAME, -+ dev->base_addr, -+ dev->dev_addr[0], dev->dev_addr[1], -+ dev->dev_addr[2], dev->dev_addr[3], -+ dev->dev_addr[4], dev->dev_addr[5], -+ dev->irq); - --static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs, -- void *p) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- unsigned long flags; - -- if (regs->len > R8169_REGS_SIZE) -- regs->len = R8169_REGS_SIZE; -+ // Config PHY -+ rtl8169_hw_PHY_config(dev); - -- spin_lock_irqsave(&tp->lock, flags); -- memcpy_fromio(p, tp->mmio_addr, regs->len); -- spin_unlock_irqrestore(&tp->lock, flags); --} -- --static struct ethtool_ops rtl8169_ethtool_ops = { -- .get_drvinfo = rtl8169_get_drvinfo, -- .get_regs_len = rtl8169_get_regs_len, -- .get_link = ethtool_op_get_link, -- .get_settings = rtl8169_get_settings, -- .set_settings = rtl8169_set_settings, -- .get_rx_csum = rtl8169_get_rx_csum, -- .set_rx_csum = rtl8169_set_rx_csum, -- .get_tx_csum = ethtool_op_get_tx_csum, -- .set_tx_csum = ethtool_op_set_tx_csum, -- .get_sg = ethtool_op_get_sg, -- .set_sg = ethtool_op_set_sg, -- .get_tso = ethtool_op_get_tso, -- .set_tso = ethtool_op_set_tso, -- .get_regs = rtl8169_get_regs, --}; -+ DBG_PRINT("Set MAC Reg C+CR Offset 0x82h = 0x01h\n"); -+ RTL_W8( 0x82, 0x01 ); - --static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum, -- int bitval) --{ -- int val; -+ if( priv->mcfg < MCFG_METHOD_3 ){ -+ DBG_PRINT("Set PCI Latency=0x40\n"); -+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); -+ } - -- val = mdio_read(ioaddr, reg); -- val = (bitval == 1) ? -- val | (bitval << bitnum) : val & ~(0x0001 << bitnum); -- mdio_write(ioaddr, reg, val & 0xffff); --} -- --static void rtl8169_get_mac_version(struct rtl8169_private *tp, void __iomem *ioaddr) --{ -- const struct { -- u32 mask; -- int mac_version; -- } mac_info[] = { -- { 0x1 << 28, RTL_GIGA_MAC_VER_X }, -- { 0x1 << 26, RTL_GIGA_MAC_VER_E }, -- { 0x1 << 23, RTL_GIGA_MAC_VER_D }, -- { 0x00000000, RTL_GIGA_MAC_VER_B } /* Catch-all */ -- }, *p = mac_info; -- u32 reg; -- -- reg = RTL_R32(TxConfig) & 0x7c800000; -- while ((reg & p->mask) != p->mask) -- p++; -- tp->mac_version = p->mac_version; --} -- --static void rtl8169_print_mac_version(struct rtl8169_private *tp) --{ -- struct { -- int version; -- char *msg; -- } mac_print[] = { -- { RTL_GIGA_MAC_VER_E, "RTL_GIGA_MAC_VER_E" }, -- { RTL_GIGA_MAC_VER_D, "RTL_GIGA_MAC_VER_D" }, -- { RTL_GIGA_MAC_VER_B, "RTL_GIGA_MAC_VER_B" }, -- { 0, NULL } -- }, *p; -- -- for (p = mac_print; p->msg; p++) { -- if (tp->mac_version == p->version) { -- dprintk("mac_version == %s (%04d)\n", p->msg, -- p->version); -- return; -- } -- } -- dprintk("mac_version == Unknown\n"); --} -- --static void rtl8169_get_phy_version(struct rtl8169_private *tp, void __iomem *ioaddr) --{ -- const struct { -- u16 mask; -- u16 set; -- int phy_version; -- } phy_info[] = { -- { 0x000f, 0x0002, RTL_GIGA_PHY_VER_G }, -- { 0x000f, 0x0001, RTL_GIGA_PHY_VER_F }, -- { 0x000f, 0x0000, RTL_GIGA_PHY_VER_E }, -- { 0x0000, 0x0000, RTL_GIGA_PHY_VER_D } /* Catch-all */ -- }, *p = phy_info; -- u16 reg; -- -- reg = mdio_read(ioaddr, 3) & 0xffff; -- while ((reg & p->mask) != p->set) -- p++; -- tp->phy_version = p->phy_version; --} -- --static void rtl8169_print_phy_version(struct rtl8169_private *tp) --{ -- struct { -- int version; -- char *msg; -- u32 reg; -- } phy_print[] = { -- { RTL_GIGA_PHY_VER_G, "RTL_GIGA_PHY_VER_G", 0x0002 }, -- { RTL_GIGA_PHY_VER_F, "RTL_GIGA_PHY_VER_F", 0x0001 }, -- { RTL_GIGA_PHY_VER_E, "RTL_GIGA_PHY_VER_E", 0x0000 }, -- { RTL_GIGA_PHY_VER_D, "RTL_GIGA_PHY_VER_D", 0x0000 }, -- { 0, NULL, 0x0000 } -- }, *p; -- -- for (p = phy_print; p->msg; p++) { -- if (tp->phy_version == p->version) { -- dprintk("phy_version == %s (%04x)\n", p->msg, p->reg); -- return; -- } -- } -- dprintk("phy_version == Unknown\n"); --} -- --static void rtl8169_hw_phy_config(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- struct { -- u16 regs[5]; /* Beware of bit-sign propagation */ -- } phy_magic[5] = { { -- { 0x0000, //w 4 15 12 0 -- 0x00a1, //w 3 15 0 00a1 -- 0x0008, //w 2 15 0 0008 -- 0x1020, //w 1 15 0 1020 -- 0x1000 } },{ //w 0 15 0 1000 -- { 0x7000, //w 4 15 12 7 -- 0xff41, //w 3 15 0 ff41 -- 0xde60, //w 2 15 0 de60 -- 0x0140, //w 1 15 0 0140 -- 0x0077 } },{ //w 0 15 0 0077 -- { 0xa000, //w 4 15 12 a -- 0xdf01, //w 3 15 0 df01 -- 0xdf20, //w 2 15 0 df20 -- 0xff95, //w 1 15 0 ff95 -- 0xfa00 } },{ //w 0 15 0 fa00 -- { 0xb000, //w 4 15 12 b -- 0xff41, //w 3 15 0 ff41 -- 0xde20, //w 2 15 0 de20 -- 0x0140, //w 1 15 0 0140 -- 0x00bb } },{ //w 0 15 0 00bb -- { 0xf000, //w 4 15 12 f -- 0xdf01, //w 3 15 0 df01 -- 0xdf20, //w 2 15 0 df20 -- 0xff95, //w 1 15 0 ff95 -- 0xbf00 } //w 0 15 0 bf00 -+ if( priv->mcfg == MCFG_METHOD_2 ){ -+ DBG_PRINT("Set MAC Reg C+CR Offset 0x82h = 0x01h\n"); -+ RTL_W8( 0x82, 0x01 ); -+ DBG_PRINT("Set PHY Reg 0x0bh = 0x00h\n"); -+ RTL8169_WRITE_GMII_REG( ioaddr, 0x0b, 0x0000 ); //w 0x0b 15 0 0 -+ } -+ -+ // if TBI is not endbled -+ if( !(RTL_R8(PHYstatus) & TBI_Enable) ){ -+ int val = RTL8169_READ_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG ); -+ -+#ifdef RTL8169_HW_FLOW_CONTROL_SUPPORT -+ val |= PHY_Cap_PAUSE | PHY_Cap_ASYM_PAUSE ; -+#endif //end #define RTL8169_HW_FLOW_CONTROL_SUPPORT -+ -+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; -+ // Force RTL8169 in 10/100/1000 Full/Half mode. -+ if( option > 0 ){ -+ printk(KERN_INFO "%s: Force-mode Enabled. \n", dev->name); -+ Cap10_100 = 0; -+ Cap1000 = 0; -+ switch( option ){ -+ case _10_Half: -+ Cap10_100 = PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _10_Full: -+ Cap10_100 = PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _100_Half: -+ Cap10_100 = PHY_Cap_100_Half | PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _100_Full: -+ Cap10_100 = PHY_Cap_100_Full | PHY_Cap_100_Half | PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _1000_Full: -+ Cap10_100 = PHY_Cap_100_Full | PHY_Cap_100_Half | PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_1000_Full; -+ break; -+ default: -+ break; -+ } -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG, Cap10_100 | ( val&0xC1F ) ); //leave PHY_AUTO_NEGO_REG bit4:0 unchanged -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_1000_CTRL_REG, Cap1000 ); - } -- }, *p = phy_magic; -- int i; -+ else{ -+ printk(KERN_INFO "%s: Auto-negotiation Enabled.\n", dev->name); - -- rtl8169_print_mac_version(tp); -- rtl8169_print_phy_version(tp); -+ // enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG, -+ PHY_Cap_10_Half | PHY_Cap_10_Full | PHY_Cap_100_Half | PHY_Cap_100_Full | ( val&0xC1F ) ); - -- if (tp->mac_version <= RTL_GIGA_MAC_VER_B) -- return; -- if (tp->phy_version >= RTL_GIGA_PHY_VER_H) -- return; -+ // enable 1000 Full Mode -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_1000_CTRL_REG, PHY_Cap_1000_Full ); - -- dprintk("MAC version != 0 && PHY version == 0 or 1\n"); -- dprintk("Do final_reg2.cfg\n"); -+ }// end of if( option > 0 ) - -- /* Shazam ! */ - -- if (tp->mac_version == RTL_GIGA_MAC_VER_X) { -- mdio_write(ioaddr, 31, 0x0001); -- mdio_write(ioaddr, 9, 0x273a); -- mdio_write(ioaddr, 14, 0x7bfb); -- mdio_write(ioaddr, 27, 0x841e); -+ // Enable auto-negotiation and restart auto-nigotiation -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_CTRL_REG, PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego ); -+ udelay(100); - -- mdio_write(ioaddr, 31, 0x0002); -- mdio_write(ioaddr, 1, 0x90d0); -- mdio_write(ioaddr, 31, 0x0000); -- return; -- } -+ // wait for auto-negotiation process -+ for( i = 10000; i > 0; i-- ){ -+ //check if auto-negotiation complete -+ if( RTL8169_READ_GMII_REG(ioaddr, PHY_STAT_REG) & PHY_Auto_Neco_Comp ){ -+ udelay(100); -+ option = RTL_R8(PHYstatus); -+ if( option & _1000bpsF ){ -+ printk(KERN_INFO "%s: 1000Mbps Full-duplex operation.\n", dev->name); -+ } -+ else{ -+ printk(KERN_INFO "%s: %sMbps %s-duplex operation.\n", dev->name, -+ (option & _100bps) ? "100" : "10", (option & FullDup) ? "Full" : "Half" ); -+ } -+ break; -+ } -+ else{ -+ udelay(100); -+ }// end of if( RTL8169_READ_GMII_REG(ioaddr, 1) & 0x20 ) -+ }// end for-loop to wait for auto-negotiation process -+ -+ option = RTL_R8(PHYstatus); -+ if( option & _1000bpsF ){ -+ priv->linkstatus = _1000_Full; -+ } -+ else{ -+ if(option & _100bps){ -+ priv->linkstatus = (option & FullDup) ? _100_Full : _100_Half; -+ } -+ else{ -+ priv->linkstatus = (option & FullDup) ? _10_Full : _10_Half; -+ } -+ } -+ DBG_PRINT("priv->linkstatus = 0x%02x\n", priv->linkstatus); - -- /* phy config for RTL8169s mac_version C chip */ -- mdio_write(ioaddr, 31, 0x0001); //w 31 2 0 1 -- mdio_write(ioaddr, 21, 0x1000); //w 21 15 0 1000 -- mdio_write(ioaddr, 24, 0x65c7); //w 24 15 0 65c7 -- rtl8169_write_gmii_reg_bit(ioaddr, 4, 11, 0); //w 4 11 11 0 -+ }// end of TBI is not enabled -+ else{ -+ udelay(100); -+ DBG_PRINT("1000Mbps Full-duplex operation, TBI Link %s!\n",(RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed" ); - -- for (i = 0; i < ARRAY_SIZE(phy_magic); i++, p++) { -- int val, pos = 4; -+ }// end of TBI is not enabled - -- val = (mdio_read(ioaddr, pos) & 0x0fff) | (p->regs[0] & 0xffff); -- mdio_write(ioaddr, pos, val); -- while (--pos >= 0) -- mdio_write(ioaddr, pos, p->regs[4 - pos] & 0xffff); -- rtl8169_write_gmii_reg_bit(ioaddr, 4, 11, 1); //w 4 11 11 1 -- rtl8169_write_gmii_reg_bit(ioaddr, 4, 11, 0); //w 4 11 11 0 -- } -- mdio_write(ioaddr, 31, 0x0000); //w 31 2 0 0 -+ return 0; - } - --static void rtl8169_phy_timer(unsigned long __opaque) --{ -- struct net_device *dev = (struct net_device *)__opaque; -- struct rtl8169_private *tp = netdev_priv(dev); -- struct timer_list *timer = &tp->timer; -- void __iomem *ioaddr = tp->mmio_addr; -- unsigned long timeout = RTL8169_PHY_TIMEOUT; - -- assert(tp->mac_version > RTL_GIGA_MAC_VER_B); -- assert(tp->phy_version < RTL_GIGA_PHY_VER_H); - -- if (!(tp->phy_1000_ctrl_reg & PHY_Cap_1000_Full)) -- return; - -- spin_lock_irq(&tp->lock); - -- if (tp->phy_reset_pending(ioaddr)) { -- /* -- * A busy loop could burn quite a few cycles on nowadays CPU. -- * Let's delay the execution of the timer for a few ticks. -- */ -- timeout = HZ/10; -- goto out_mod_timer; -- } - -- if (tp->link_ok(ioaddr)) -- goto out_unlock; - -- printk(KERN_WARNING PFX "%s: PHY reset until link up\n", dev->name); -+//====================================================================================================== -+static void __devexit rtl8169_remove_one (struct pci_dev *pdev) -+{ -+ struct net_device *dev = pci_get_drvdata(pdev); - -- tp->phy_reset_enable(ioaddr); -+ assert (dev != NULL); -+ assert (priv != NULL); - --out_mod_timer: -- mod_timer(timer, jiffies + timeout); --out_unlock: -- spin_unlock_irq(&tp->lock); --} -+ unregister_netdev (dev); - --static inline void rtl8169_delete_timer(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- struct timer_list *timer = &tp->timer; -+#ifdef RTL8169_USE_IO -+#else -+ iounmap ((void *)(dev->base_addr)); -+#endif -+ pci_release_regions (pdev); - -- if ((tp->mac_version <= RTL_GIGA_MAC_VER_B) || -- (tp->phy_version >= RTL_GIGA_PHY_VER_H)) -- return; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ kfree (dev); -+#else -+ free_netdev(dev); -+#endif - -- del_timer_sync(timer); -+ pci_set_drvdata (pdev, NULL); - } - --static inline void rtl8169_request_timer(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- struct timer_list *timer = &tp->timer; - -- if ((tp->mac_version <= RTL_GIGA_MAC_VER_B) || -- (tp->phy_version >= RTL_GIGA_PHY_VER_H)) -- return; - -- init_timer(timer); -- timer->expires = jiffies + RTL8169_PHY_TIMEOUT; -- timer->data = (unsigned long)(dev); -- timer->function = rtl8169_phy_timer; -- add_timer(timer); --} - --#ifdef CONFIG_NET_POLL_CONTROLLER --/* -- * Polling 'interrupt' - used by things like netconsole to send skbs -- * without having to re-enable interrupts. It's not called while -- * the interrupt routine is executing. -- */ --static void rtl8169_netpoll(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- struct pci_dev *pdev = tp->pci_dev; -- -- disable_irq(pdev->irq); -- rtl8169_interrupt(pdev->irq, dev, NULL); -- enable_irq(pdev->irq); --} --#endif - --static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev, -- void __iomem *ioaddr) --{ -- iounmap(ioaddr); -- pci_release_regions(pdev); -- pci_disable_device(pdev); -- free_netdev(dev); --} - --static int __devinit --rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, -- void __iomem **ioaddr_out) -+ -+//====================================================================================================== -+static int rtl8169_open (struct net_device *dev) - { -- void __iomem *ioaddr; -- struct net_device *dev; -- struct rtl8169_private *tp; -- int rc = -ENOMEM, i, acpi_idle_state = 0, pm_cap; -+ struct rtl8169_private *priv = dev->priv; -+ struct pci_dev *pdev = priv->pci_dev; -+ int retval; -+// u8 diff; -+// u32 TxPhyAddr, RxPhyAddr; - -- assert(ioaddr_out != NULL); - -- /* dev zeroed in alloc_etherdev */ -- dev = alloc_etherdev(sizeof (*tp)); -- if (dev == NULL) { -- printk(KERN_ERR PFX "unable to alloc new ethernet\n"); -- goto err_out; -+ if( priv->drvinit_fail == 1 ){ -+ printk("%s: Gigabit driver open failed.\n", dev->name ); -+ return -ENOMEM; - } - -- SET_MODULE_OWNER(dev); -- SET_NETDEV_DEV(dev, &pdev->dev); -- tp = netdev_priv(dev); -- -- /* enable device (incl. PCI PM wakeup and hotplug setup) */ -- rc = pci_enable_device(pdev); -- if (rc) { -- printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev)); -- goto err_out_free_dev; -- } -- -- rc = pci_set_mwi(pdev); -- if (rc < 0) -- goto err_out_disable; -- -- /* save power state before pci_enable_device overwrites it */ -- pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); -- if (pm_cap) { -- u16 pwr_command; -- -- pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command); -- acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; -- } else { -- printk(KERN_ERR PFX -- "Cannot find PowerManagement capability, aborting.\n"); -- goto err_out_mwi; -+ retval = request_irq (dev->irq, rtl8169_interrupt, SA_SHIRQ, dev->name, dev); -+ if (retval) { -+ return retval; - } - -- /* make sure PCI base addr 1 is MMIO */ -- if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { -- printk(KERN_ERR PFX -- "region #1 not an MMIO resource, aborting\n"); -- rc = -ENODEV; -- goto err_out_mwi; -+ //2004-05-11 -+ // Allocate tx/rx descriptor space -+ priv->sizeof_txdesc_space = NUM_TX_DESC * sizeof(struct TxDesc)+256; -+ priv->txdesc_space = pci_alloc_consistent( pdev, priv->sizeof_txdesc_space, &priv->txdesc_phy_dma_addr ); -+ if( priv->txdesc_space == NULL ){ -+ printk("%s: Gigabit driver alloc txdesc_space failed.\n", dev->name ); -+ return -ENOMEM; - } -- /* check for weird/broken PCI region reporting */ -- if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { -- printk(KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); -- rc = -ENODEV; -- goto err_out_mwi; -+ priv->sizeof_rxdesc_space = NUM_RX_DESC * sizeof(struct RxDesc)+256; -+ priv->rxdesc_space = pci_alloc_consistent( pdev, priv->sizeof_rxdesc_space, &priv->rxdesc_phy_dma_addr ); -+ if( priv->rxdesc_space == NULL ){ -+ printk("%s: Gigabit driver alloc rxdesc_space failed.\n", dev->name ); -+ return -ENOMEM; - } - -- rc = pci_request_regions(pdev, MODULENAME); -- if (rc) { -- printk(KERN_ERR PFX "%s: could not request regions.\n", -- pci_name(pdev)); -- goto err_out_mwi; -+ if(priv->txdesc_phy_dma_addr & 0xff){ -+ printk("%s: Gigabit driver txdesc_phy_dma_addr is not 256-bytes-aligned.\n", dev->name ); - } -+ if(priv->rxdesc_phy_dma_addr & 0xff){ -+ printk("%s: Gigabit driver rxdesc_phy_dma_addr is not 256-bytes-aligned.\n", dev->name ); -+ } -+ // Set tx/rx descriptor space -+ priv->TxDescArray = (struct TxDesc *)priv->txdesc_space; -+ priv->RxDescArray = (struct RxDesc *)priv->rxdesc_space; - -- tp->cp_cmd = PCIMulRW | RxChkSum; -+ { -+ int i; -+ struct sk_buff *skb = NULL; - -- if ((sizeof(dma_addr_t) > 4) && -- !pci_set_dma_mask(pdev, DMA_64BIT_MASK) && use_dac) { -- tp->cp_cmd |= PCIDAC; -- dev->features |= NETIF_F_HIGHDMA; -- } else { -- rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); -- if (rc < 0) { -- printk(KERN_ERR PFX "DMA configuration failed.\n"); -- goto err_out_free_res; -+ for(i=0;i<NUM_RX_DESC;i++){ -+ skb = RTL8169_ALLOC_RXSKB(MAX_RX_SKBDATA_SIZE); -+ if( skb != NULL ) { -+ skb_reserve (skb, 2); // 16 byte align the IP fields. // -+ priv->Rx_skbuff[i] = skb; -+ } -+ else{ -+ printk("%s: Gigabit driver failed to allocate skbuff.\n", dev->name); -+ priv->drvinit_fail = 1; -+ } - } - } - -- pci_set_master(pdev); - -- /* ioremap MMIO region */ -- ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); -- if (ioaddr == NULL) { -- printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); -- rc = -EIO; -- goto err_out_free_res; -- } -+ ////////////////////////////////////////////////////////////////////////////// -+ rtl8169_init_ring (dev); -+ rtl8169_hw_start (dev); - -- /* Unneeded ? Don't mess with Mrs. Murphy. */ -- rtl8169_irq_mask_and_ack(ioaddr); - -- /* Soft reset the chip. */ -- RTL_W8(ChipCmd, CmdReset); -+ // ------------------------------------------------------ -+ DBG_PRINT("FIX PCS -> rtl8169_request_timer\n"); -+ priv->expire_time = RTL8169_TIMER_EXPIRE_TIME; -+ rtl8169_request_timer( (&priv->r8169_timer), priv->expire_time, rtl8169_timer_handler, ((void *)dev) ); //in open() - -- /* Check that the chip has finished the reset. */ -- for (i = 1000; i > 0; i--) { -- if ((RTL_R8(ChipCmd) & CmdReset) == 0) -- break; -- udelay(10); -- } - -- /* Identify chip attached to board */ -- rtl8169_get_mac_version(tp, ioaddr); -- rtl8169_get_phy_version(tp, ioaddr); -+ DBG_PRINT("%s: %s() alloc_rxskb_cnt = %d\n", dev->name, __FUNCTION__, alloc_rxskb_cnt ); - -- rtl8169_print_mac_version(tp); -- rtl8169_print_phy_version(tp); -+ return 0; - -- for (i = ARRAY_SIZE(rtl_chip_info) - 1; i >= 0; i--) { -- if (tp->mac_version == rtl_chip_info[i].mac_version) -- break; -- } -- if (i < 0) { -- /* Unknown chip: assume array element #0, original RTL-8169 */ -- printk(KERN_DEBUG PFX -- "PCI device %s: unknown chip version, assuming %s\n", -- pci_name(pdev), rtl_chip_info[0].name); -- i++; -- } -- tp->chipset = i; -+}//end of rtl8169_open (struct net_device *dev) - -- *ioaddr_out = ioaddr; -- *dev_out = dev; --out: -- return rc; - --err_out_free_res: -- pci_release_regions(pdev); - --err_out_mwi: -- pci_clear_mwi(pdev); - --err_out_disable: -- pci_disable_device(pdev); - --err_out_free_dev: -- free_netdev(dev); --err_out: -- *ioaddr_out = NULL; -- *dev_out = NULL; -- goto out; --} -- --static int __devinit --rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) --{ -- struct net_device *dev = NULL; -- struct rtl8169_private *tp; -- void __iomem *ioaddr = NULL; -- static int board_idx = -1; -- static int printed_version = 0; -- u8 autoneg, duplex; -- u16 speed; -- int i, rc; - -- assert(pdev != NULL); -- assert(ent != NULL); - -- board_idx++; - -- if (!printed_version) { -- printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n", -- MODULENAME, RTL8169_VERSION); -- printed_version = 1; -- } -- -- rc = rtl8169_init_board(pdev, &dev, &ioaddr); -- if (rc) -- return rc; -- -- tp = netdev_priv(dev); -- assert(ioaddr != NULL); -- -- if (RTL_R8(PHYstatus) & TBI_Enable) { -- tp->set_speed = rtl8169_set_speed_tbi; -- tp->get_settings = rtl8169_gset_tbi; -- tp->phy_reset_enable = rtl8169_tbi_reset_enable; -- tp->phy_reset_pending = rtl8169_tbi_reset_pending; -- tp->link_ok = rtl8169_tbi_link_ok; -- -- tp->phy_1000_ctrl_reg = PHY_Cap_1000_Full; /* Implied by TBI */ -- } else { -- tp->set_speed = rtl8169_set_speed_xmii; -- tp->get_settings = rtl8169_gset_xmii; -- tp->phy_reset_enable = rtl8169_xmii_reset_enable; -- tp->phy_reset_pending = rtl8169_xmii_reset_pending; -- tp->link_ok = rtl8169_xmii_link_ok; -- } -- -- /* Get MAC address. FIXME: read EEPROM */ -- for (i = 0; i < MAC_ADDR_LEN; i++) -- dev->dev_addr[i] = RTL_R8(MAC0 + i); -- -- dev->open = rtl8169_open; -- dev->hard_start_xmit = rtl8169_start_xmit; -- dev->get_stats = rtl8169_get_stats; -- SET_ETHTOOL_OPS(dev, &rtl8169_ethtool_ops); -- dev->stop = rtl8169_close; -- dev->tx_timeout = rtl8169_tx_timeout; -- dev->set_multicast_list = rtl8169_set_rx_mode; -- dev->watchdog_timeo = RTL8169_TX_TIMEOUT; -- dev->irq = pdev->irq; -- dev->base_addr = (unsigned long) ioaddr; -- dev->change_mtu = rtl8169_change_mtu; -- --#ifdef CONFIG_R8169_NAPI -- dev->poll = rtl8169_poll; -- dev->weight = R8169_NAPI_WEIGHT; -- printk(KERN_INFO PFX "NAPI enabled\n"); --#endif -+//====================================================================================================== -+static void rtl8169_hw_PHY_reset(struct net_device *dev) -+{ -+ int val, phy_reset_expiretime = 50; -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; - --#ifdef CONFIG_R8169_VLAN -- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; -- dev->vlan_rx_register = rtl8169_vlan_rx_register; -- dev->vlan_rx_kill_vid = rtl8169_vlan_rx_kill_vid; --#endif -+ DBG_PRINT("%s: Reset RTL8169s PHY\n", dev->name); - --#ifdef CONFIG_NET_POLL_CONTROLLER -- dev->poll_controller = rtl8169_netpoll; --#endif -+ val = ( RTL8169_READ_GMII_REG( ioaddr, 0 ) | 0x8000 ) & 0xffff; -+ RTL8169_WRITE_GMII_REG( ioaddr, 0, val ); - -- tp->intr_mask = 0xffff; -- tp->pci_dev = pdev; -- tp->mmio_addr = ioaddr; -+ do //waiting for phy reset -+ { -+ if( RTL8169_READ_GMII_REG( ioaddr, 0 ) & 0x8000 ){ -+ phy_reset_expiretime --; -+ udelay(100); -+ } -+ else{ -+ break; -+ } -+ }while( phy_reset_expiretime >= 0 ); - -- spin_lock_init(&tp->lock); -+ assert( phy_reset_expiretime > 0 ); -+} - -- rc = register_netdev(dev); -- if (rc) { -- rtl8169_release_board(pdev, dev, ioaddr); -- return rc; -- } - -- printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", dev->name, -- rtl_chip_info[tp->chipset].name); - -- pci_set_drvdata(pdev, dev); - -- printk(KERN_INFO "%s: %s at 0x%lx, " -- "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " -- "IRQ %d\n", -- dev->name, -- rtl_chip_info[ent->driver_data].name, -- dev->base_addr, -- dev->dev_addr[0], dev->dev_addr[1], -- dev->dev_addr[2], dev->dev_addr[3], -- dev->dev_addr[4], dev->dev_addr[5], dev->irq); -+//====================================================================================================== -+static void rtl8169_hw_PHY_config (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ void *ioaddr = (void*)priv->ioaddr; - -- rtl8169_hw_phy_config(dev); -+ DBG_PRINT("priv->mcfg=%d, priv->pcfg=%d\n",priv->mcfg,priv->pcfg); - -- dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n"); -- RTL_W8(0x82, 0x01); -+ if( priv->mcfg == MCFG_METHOD_4 ){ -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0001 ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x09, 0x273a ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x0e, 0x7bfb ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1b, 0x841e ); - -- if (tp->mac_version < RTL_GIGA_MAC_VER_E) { -- dprintk("Set PCI Latency=0x40\n"); -- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0002 ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x90D0 ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0000 ); - } -- -- if (tp->mac_version == RTL_GIGA_MAC_VER_D) { -- dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n"); -- RTL_W8(0x82, 0x01); -- dprintk("Set PHY Reg 0x0bh = 0x00h\n"); -- mdio_write(ioaddr, 0x0b, 0x0000); //w 0x0b 15 0 0 -+ else{ -+ DBG_PRINT("priv->mcfg=%d. Discard hw PHY config.\n",priv->mcfg); - } -- -- rtl8169_link_option(board_idx, &autoneg, &speed, &duplex); -- -- rtl8169_set_speed(dev, autoneg, speed, duplex); -- -- if (RTL_R8(PHYstatus) & TBI_Enable) -- printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name); -- -- return 0; - } - --static void __devexit --rtl8169_remove_one(struct pci_dev *pdev) --{ -- struct net_device *dev = pci_get_drvdata(pdev); -- struct rtl8169_private *tp = netdev_priv(dev); - -- assert(dev != NULL); -- assert(tp != NULL); - -- unregister_netdev(dev); -- rtl8169_release_board(pdev, dev, tp->mmio_addr); -- pci_set_drvdata(pdev, NULL); --} - --#ifdef CONFIG_PM - --static int rtl8169_suspend(struct pci_dev *pdev, pm_message_t state) --{ -- struct net_device *dev = pci_get_drvdata(pdev); -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- unsigned long flags; - -- if (!netif_running(dev)) -- return 0; -- -- netif_device_detach(dev); -- netif_stop_queue(dev); -- spin_lock_irqsave(&tp->lock, flags); -- -- /* Disable interrupts, stop Rx and Tx */ -- RTL_W16(IntrMask, 0); -- RTL_W8(ChipCmd, 0); -- -- /* Update the error counts. */ -- tp->stats.rx_missed_errors += RTL_R32(RxMissed); -- RTL_W32(RxMissed, 0); -- spin_unlock_irqrestore(&tp->lock, flags); -- -- return 0; --} - --static int rtl8169_resume(struct pci_dev *pdev) --{ -- struct net_device *dev = pci_get_drvdata(pdev); - -- if (!netif_running(dev)) -- return 0; - -- netif_device_attach(dev); -- rtl8169_hw_start(dev); - -- return 0; --} -- --#endif /* CONFIG_PM */ -- --static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, -- struct net_device *dev) -+//====================================================================================================== -+static void rtl8169_hw_start (struct net_device *dev) - { -- unsigned int mtu = dev->mtu; -- -- tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; --} -- --static int rtl8169_open(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- struct pci_dev *pdev = tp->pci_dev; -- int retval; -- -- rtl8169_set_rxbufsize(tp, dev); -- -- retval = -- request_irq(dev->irq, rtl8169_interrupt, SA_SHIRQ, dev->name, dev); -- if (retval < 0) -- goto out; -- -- retval = -ENOMEM; -- -- /* -- * Rx and Tx desscriptors needs 256 bytes alignment. -- * pci_alloc_consistent provides more. -- */ -- tp->TxDescArray = pci_alloc_consistent(pdev, R8169_TX_RING_BYTES, -- &tp->TxPhyAddr); -- if (!tp->TxDescArray) -- goto err_free_irq; -- -- tp->RxDescArray = pci_alloc_consistent(pdev, R8169_RX_RING_BYTES, -- &tp->RxPhyAddr); -- if (!tp->RxDescArray) -- goto err_free_tx; -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ u32 i; - -- retval = rtl8169_init_ring(dev); -- if (retval < 0) -- goto err_free_rx; - -- INIT_WORK(&tp->task, NULL, dev); -+ /* Soft reset the chip. */ -+ RTL_W8 ( ChipCmd, CmdReset); - -- rtl8169_hw_start(dev); -+ /* Check that the chip has finished the reset. */ -+ for (i = 1000; i > 0; i--){ -+ if ((RTL_R8( ChipCmd ) & CmdReset) == 0) break; -+ else udelay (10); -+ } - -- rtl8169_request_timer(dev); -+ RTL_W8 ( Cfg9346, Cfg9346_Unlock); -+ RTL_W8 ( ChipCmd, CmdTxEnb | CmdRxEnb); -+ RTL_W8 ( ETThReg, ETTh); - -- rtl8169_check_link_status(dev, tp, tp->mmio_addr); --out: -- return retval; -+ // For gigabit rtl8169 -+ RTL_W16 ( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len ); - --err_free_rx: -- pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray, -- tp->RxPhyAddr); --err_free_tx: -- pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray, -- tp->TxPhyAddr); --err_free_irq: -- free_irq(dev->irq, dev); -- goto out; --} -+ // Set Rx Config register -+ i = rtl8169_rx_config | ( RTL_R32( RxConfig ) & rtl_chip_info[priv->chipset].RxConfigMask); -+ RTL_W32 ( RxConfig, i); - --static void rtl8169_hw_reset(void __iomem *ioaddr) --{ -- /* Disable interrupts */ -- rtl8169_irq_mask_and_ack(ioaddr); - -- /* Reset the chipset */ -- RTL_W8(ChipCmd, CmdReset); -+ /* Set DMA burst size and Interframe Gap Time */ -+ RTL_W32 ( TxConfig, (TX_DMA_BURST << TxDMAShift) | (InterFrameGap << TxInterFrameGapShift) ); - -- /* PCI commit */ -- RTL_R8(ChipCmd); --} - --static void --rtl8169_hw_start(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- u32 i; - -- /* Soft reset the chip. */ -- RTL_W8(ChipCmd, CmdReset); -+ RTL_W16( CPlusCmd, RTL_R16(CPlusCmd) ); - -- /* Check that the chip has finished the reset. */ -- for (i = 1000; i > 0; i--) { -- if ((RTL_R8(ChipCmd) & CmdReset) == 0) -- break; -- udelay(10); -+ if( priv->mcfg == MCFG_METHOD_2 || -+ priv->mcfg == MCFG_METHOD_3) -+ { -+ RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<14)|(1<<3)) ); -+ DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3 and bit-14\n"); -+ } -+ else -+ { -+ RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<3)) ); -+ DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3.\n"); - } - -- RTL_W8(Cfg9346, Cfg9346_Unlock); -- RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); -- RTL_W8(EarlyTxThres, EarlyTxThld); -- -- /* Low hurts. Let's disable the filtering. */ -- RTL_W16(RxMaxSize, 16383); -- -- /* Set Rx Config register */ -- i = rtl8169_rx_config | -- (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); -- RTL_W32(RxConfig, i); -+ { -+ //RTL_W16(0xE2, 0x1517); -+ //RTL_W16(0xE2, 0x152a); -+ //RTL_W16(0xE2, 0x282a); -+ RTL_W16(0xE2, 0x0000); -+ } - -- /* Set DMA burst size and Interframe Gap Time */ -- RTL_W32(TxConfig, -- (TX_DMA_BURST << TxDMAShift) | (InterFrameGap << -- TxInterFrameGapShift)); -- tp->cp_cmd |= RTL_R16(CPlusCmd); -- RTL_W16(CPlusCmd, tp->cp_cmd); -- -- if ((tp->mac_version == RTL_GIGA_MAC_VER_D) || -- (tp->mac_version == RTL_GIGA_MAC_VER_E)) { -- dprintk(KERN_INFO PFX "Set MAC Reg C+CR Offset 0xE0. " -- "Bit-3 and bit-14 MUST be 1\n"); -- tp->cp_cmd |= (1 << 14) | PCIMulRW; -- RTL_W16(CPlusCmd, tp->cp_cmd); -- } -- -- /* -- * Undocumented corner. Supposedly: -- * (TxTimer << 12) | (TxPackets << 8) | (RxTimer << 4) | RxPackets -- */ -- RTL_W16(IntrMitigate, 0x0000); -- -- RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr & DMA_32BIT_MASK)); -- RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr >> 32)); -- RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr & DMA_32BIT_MASK)); -- RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr >> 32)); -- RTL_W8(Cfg9346, Cfg9346_Lock); -- udelay(10); -- -- RTL_W32(RxMissed, 0); -- -- rtl8169_set_rx_mode(dev); -+ priv->cur_rx = 0; - -- /* no early-rx interrupts */ -- RTL_W16(MultiIntr, RTL_R16(MultiIntr) & 0xF000); -+ RTL_W32 ( TxDescStartAddr, priv->txdesc_phy_dma_addr); -+ RTL_W32 ( TxDescStartAddr + 4, 0x00); -+ RTL_W32 ( RxDescStartAddr, priv->rxdesc_phy_dma_addr); -+ RTL_W32 ( RxDescStartAddr + 4, 0x00); - -- /* Enable all known interrupts by setting the interrupt mask. */ -- RTL_W16(IntrMask, rtl8169_intr_mask); -+ RTL_W8 ( Cfg9346, Cfg9346_Lock ); -+ udelay (10); - -- netif_start_queue(dev); --} -+ RTL_W32 ( RxMissed, 0 ); - --static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- int ret = 0; -+ rtl8169_set_rx_mode (dev); - -- if (new_mtu < ETH_ZLEN || new_mtu > SafeMtu) -- return -EINVAL; -+ RTL_W16 ( MultiIntr, RTL_R16(MultiIntr) & 0xF000); - -- dev->mtu = new_mtu; -+ RTL_W16 ( IntrMask, rtl8169_intr_mask); - -- if (!netif_running(dev)) -- goto out; -+ netif_start_queue (dev); - -- rtl8169_down(dev); -+}//end of rtl8169_hw_start (struct net_device *dev) - -- rtl8169_set_rxbufsize(tp, dev); - -- ret = rtl8169_init_ring(dev); -- if (ret < 0) -- goto out; - -- netif_poll_enable(dev); - -- rtl8169_hw_start(dev); - -- rtl8169_request_timer(dev); - --out: -- return ret; --} - --static inline void rtl8169_make_unusable_by_asic(struct RxDesc *desc) -+//====================================================================================================== -+static void rtl8169_init_ring (struct net_device *dev) - { -- desc->addr = 0x0badbadbadbadbadull; -- desc->opts1 &= ~cpu_to_le32(DescOwn | RsvdMask); --} -+ struct rtl8169_private *priv = dev->priv; -+ struct pci_dev *pdev = priv->pci_dev; -+ int i; -+ struct sk_buff *skb; -+ - --static void rtl8169_free_rx_skb(struct rtl8169_private *tp, -- struct sk_buff **sk_buff, struct RxDesc *desc) --{ -- struct pci_dev *pdev = tp->pci_dev; -+ priv->cur_rx = 0; -+ priv->cur_tx = 0; -+ priv->dirty_tx = 0; -+ memset(priv->TxDescArray, 0x0, NUM_TX_DESC*sizeof(struct TxDesc)); -+ memset(priv->RxDescArray, 0x0, NUM_RX_DESC*sizeof(struct RxDesc)); - -- pci_unmap_single(pdev, le64_to_cpu(desc->addr), tp->rx_buf_sz, -- PCI_DMA_FROMDEVICE); -- dev_kfree_skb(*sk_buff); -- *sk_buff = NULL; -- rtl8169_make_unusable_by_asic(desc); --} - --static inline void rtl8169_mark_to_asic(struct RxDesc *desc, u32 rx_buf_sz) --{ -- u32 eor = le32_to_cpu(desc->opts1) & RingEnd; -+ for (i=0 ; i<NUM_TX_DESC ; i++){ -+ priv->Tx_skbuff[i]=NULL; -+ priv->txdesc_array_dma_addr[i] = pci_map_single(pdev, &priv->TxDescArray[i], sizeof(struct TxDesc), PCI_DMA_TODEVICE); -+ } - -- desc->opts1 = cpu_to_le32(DescOwn | eor | rx_buf_sz); --} -+ for (i=0; i <NUM_RX_DESC; i++) { -+ if(i==(NUM_RX_DESC-1)){ -+ priv->RxDescArray[i].status = cpu_to_le32((OWNbit | EORbit) | (unsigned long)priv->hw_rx_pkt_len); -+ } -+ else{ -+ priv->RxDescArray[i].status = cpu_to_le32(OWNbit | (unsigned long)priv->hw_rx_pkt_len); -+ } - --static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping, -- u32 rx_buf_sz) --{ -- desc->addr = cpu_to_le64(mapping); -- wmb(); -- rtl8169_mark_to_asic(desc, rx_buf_sz); -+ {//----------------------------------------------------------------------- -+ skb = priv->Rx_skbuff[i]; -+ priv->rx_skbuff_dma_addr[i] = pci_map_single(pdev, skb->data, MAX_RX_SKBDATA_SIZE, PCI_DMA_FROMDEVICE); -+ -+ if( skb != NULL ){ -+ priv->RxDescArray[i].buf_addr = cpu_to_le32(priv->rx_skbuff_dma_addr[i]); -+ priv->RxDescArray[i].buf_Haddr = 0; -+ } -+ else{ -+ DBG_PRINT("%s: %s() Rx_skbuff == NULL\n", dev->name, __FUNCTION__); -+ priv->drvinit_fail = 1; -+ } -+ }//----------------------------------------------------------------------- -+ priv->rxdesc_array_dma_addr[i] = pci_map_single(pdev, &priv->RxDescArray[i], sizeof(struct RxDesc), PCI_DMA_TODEVICE); -+ pci_dma_sync_single_for_device(pdev, priv->rxdesc_array_dma_addr[i], sizeof(struct RxDesc), PCI_DMA_TODEVICE); -+ } - } - --static int rtl8169_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff, -- struct RxDesc *desc, int rx_buf_sz) --{ -- struct sk_buff *skb; -- dma_addr_t mapping; -- int ret = 0; - -- skb = dev_alloc_skb(rx_buf_sz + NET_IP_ALIGN); -- if (!skb) -- goto err_out; - -- skb_reserve(skb, NET_IP_ALIGN); -- *sk_buff = skb; - -- mapping = pci_map_single(pdev, skb->tail, rx_buf_sz, -- PCI_DMA_FROMDEVICE); - -- rtl8169_map_to_asic(desc, mapping, rx_buf_sz); - --out: -- return ret; - --err_out: -- ret = -ENOMEM; -- rtl8169_make_unusable_by_asic(desc); -- goto out; --} -- --static void rtl8169_rx_clear(struct rtl8169_private *tp) -+//====================================================================================================== -+static void rtl8169_tx_clear (struct rtl8169_private *priv) - { - int i; - -- for (i = 0; i < NUM_RX_DESC; i++) { -- if (tp->Rx_skbuff[i]) { -- rtl8169_free_rx_skb(tp, tp->Rx_skbuff + i, -- tp->RxDescArray + i); -+ priv->cur_tx = 0; -+ for ( i = 0 ; i < NUM_TX_DESC ; i++ ){ -+ if ( priv->Tx_skbuff[i] != NULL ) { -+ dev_kfree_skb ( priv->Tx_skbuff[i] ); -+ priv->Tx_skbuff[i] = NULL; -+ priv->stats.tx_dropped++; - } - } - } - --static u32 rtl8169_rx_fill(struct rtl8169_private *tp, struct net_device *dev, -- u32 start, u32 end) --{ -- u32 cur; -- -- for (cur = start; end - cur > 0; cur++) { -- int ret, i = cur % NUM_RX_DESC; - -- if (tp->Rx_skbuff[i]) -- continue; -- -- ret = rtl8169_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i, -- tp->RxDescArray + i, tp->rx_buf_sz); -- if (ret < 0) -- break; -- } -- return cur - start; --} - --static inline void rtl8169_mark_as_last_descriptor(struct RxDesc *desc) --{ -- desc->opts1 |= cpu_to_le32(RingEnd); --} - --static void rtl8169_init_ring_indexes(struct rtl8169_private *tp) --{ -- tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0; --} - --static int rtl8169_init_ring(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); - -- rtl8169_init_ring_indexes(tp); - -- memset(tp->tx_skb, 0x0, NUM_TX_DESC * sizeof(struct ring_info)); -- memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *)); -+//====================================================================================================== -+static void rtl8169_tx_timeout (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ u8 tmp8; - -- if (rtl8169_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC) -- goto err_out; -+ /* disable Tx, if not already */ -+ tmp8 = RTL_R8( ChipCmd ); -+ if (tmp8 & CmdTxEnb){ -+ RTL_W8 ( ChipCmd, tmp8 & ~CmdTxEnb); -+ } - -- rtl8169_mark_as_last_descriptor(tp->RxDescArray + NUM_RX_DESC - 1); -+ /* Disable interrupts by clearing the interrupt mask. */ -+ RTL_W16 ( IntrMask, 0x0000); - -- return 0; -+ /* Stop a shared interrupt from scavenging while we are. */ -+ spin_lock_irq (&priv->lock); -+ rtl8169_tx_clear (priv); -+ spin_unlock_irq (&priv->lock); - --err_out: -- rtl8169_rx_clear(tp); -- return -ENOMEM; --} - --static void rtl8169_unmap_tx_skb(struct pci_dev *pdev, struct ring_info *tx_skb, -- struct TxDesc *desc) --{ -- unsigned int len = tx_skb->len; -+ rtl8169_hw_start (dev); - -- pci_unmap_single(pdev, le64_to_cpu(desc->addr), len, PCI_DMA_TODEVICE); -- desc->opts1 = 0x00; -- desc->opts2 = 0x00; -- desc->addr = 0x00; -- tx_skb->len = 0; -+ netif_wake_queue (dev); - } - --static void rtl8169_tx_clear(struct rtl8169_private *tp) --{ -- unsigned int i; - -- for (i = tp->dirty_tx; i < tp->dirty_tx + NUM_TX_DESC; i++) { -- unsigned int entry = i % NUM_TX_DESC; -- struct ring_info *tx_skb = tp->tx_skb + entry; -- unsigned int len = tx_skb->len; - -- if (len) { -- struct sk_buff *skb = tx_skb->skb; - -- rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, -- tp->TxDescArray + entry); -- if (skb) { -- dev_kfree_skb(skb); -- tx_skb->skb = NULL; -- } -- tp->stats.tx_dropped++; -- } -- } -- tp->cur_tx = tp->dirty_tx = 0; --} - --static void rtl8169_schedule_work(struct net_device *dev, void (*task)(void *)) --{ -- struct rtl8169_private *tp = netdev_priv(dev); - -- PREPARE_WORK(&tp->task, task, dev); -- schedule_delayed_work(&tp->task, 4); --} - --static void rtl8169_wait_for_quiescence(struct net_device *dev) -+//====================================================================================================== -+static int rtl8169_start_xmit (struct sk_buff *skb, struct net_device *dev) - { -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- -- synchronize_irq(dev->irq); -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ struct pci_dev *pdev = priv->pci_dev; -+ int entry = priv->cur_tx % NUM_TX_DESC; -+ int buf_len = 60; -+ dma_addr_t txbuf_dma_addr; - -- /* Wait for any pending NAPI task to complete */ -- netif_poll_disable(dev); -+ spin_lock_irq (&priv->lock); - -- rtl8169_irq_mask_and_ack(ioaddr); -- -- netif_poll_enable(dev); --} -+ if( (le32_to_cpu(priv->TxDescArray[entry].status) & OWNbit)==0 ){ - --static void rtl8169_reinit_task(void *_data) --{ -- struct net_device *dev = _data; -- int ret; -- -- if (netif_running(dev)) { -- rtl8169_wait_for_quiescence(dev); -- rtl8169_close(dev); -- } -+ priv->Tx_skbuff[entry] = skb; -+ txbuf_dma_addr = pci_map_single(pdev, skb->data, skb->len, PCI_DMA_TODEVICE); -+ -+ priv->TxDescArray[entry].buf_addr = cpu_to_le32(txbuf_dma_addr); -+ DBG_PRINT("%s: TX pkt_size = %d\n", __FUNCTION__, skb->len); -+ if( skb->len <= priv->tx_pkt_len ){ -+ buf_len = skb->len; -+ } -+ else{ -+ printk("%s: Error -- Tx packet size(%d) > mtu(%d)+14\n", dev->name, skb->len, dev->mtu); -+ buf_len = priv->tx_pkt_len; -+ } - -- ret = rtl8169_open(dev); -- if (unlikely(ret < 0)) { -- if (net_ratelimit()) { -- printk(PFX KERN_ERR "%s: reinit failure (status = %d)." -- " Rescheduling.\n", dev->name, ret); -+ if( entry != (NUM_TX_DESC-1) ){ -+ priv->TxDescArray[entry].status = cpu_to_le32((OWNbit | FSbit | LSbit) | buf_len); -+ } -+ else{ -+ priv->TxDescArray[entry].status = cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | buf_len); - } -- rtl8169_schedule_work(dev, rtl8169_reinit_task); -- } --} - --static void rtl8169_reset_task(void *_data) --{ -- struct net_device *dev = _data; -- struct rtl8169_private *tp = netdev_priv(dev); -+ pci_dma_sync_single_for_device(pdev, priv->txdesc_array_dma_addr[entry], sizeof(struct TxDesc), PCI_DMA_TODEVICE); - -- if (!netif_running(dev)) -- return; -+ RTL_W8 ( TxPoll, 0x40); //set polling bit - -- rtl8169_wait_for_quiescence(dev); -+ dev->trans_start = jiffies; - -- rtl8169_rx_interrupt(dev, tp, tp->mmio_addr); -- rtl8169_tx_clear(tp); -+ priv->stats.tx_bytes += ( (skb->len > ETH_ZLEN) ? skb->len : ETH_ZLEN); -+ priv->cur_tx++; -+ }//end of if( (priv->TxDescArray[entry].status & 0x80000000)==0 ) - -- if (tp->dirty_rx == tp->cur_rx) { -- rtl8169_init_ring_indexes(tp); -- rtl8169_hw_start(dev); -- netif_wake_queue(dev); -- } else { -- if (net_ratelimit()) { -- printk(PFX KERN_EMERG "%s: Rx buffers shortage\n", -- dev->name); -+ spin_unlock_irq (&priv->lock); -+ -+ if ( (priv->cur_tx - NUM_TX_DESC) == priv->dirty_tx ){ -+ netif_stop_queue (dev); -+ } -+ else{ -+ if (netif_queue_stopped (dev)){ -+ netif_wake_queue (dev); - } -- rtl8169_schedule_work(dev, rtl8169_reset_task); - } --} -- --static void rtl8169_tx_timeout(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- -- rtl8169_hw_reset(tp->mmio_addr); - -- /* Let's wait a bit while any (async) irq lands on */ -- rtl8169_schedule_work(dev, rtl8169_reset_task); -+ return 0; - } - --static int rtl8169_xmit_frags(struct rtl8169_private *tp, struct sk_buff *skb, -- u32 opts1) --{ -- struct skb_shared_info *info = skb_shinfo(skb); -- unsigned int cur_frag, entry; -- struct TxDesc *txd; -- -- entry = tp->cur_tx; -- for (cur_frag = 0; cur_frag < info->nr_frags; cur_frag++) { -- skb_frag_t *frag = info->frags + cur_frag; -- dma_addr_t mapping; -- u32 status, len; -- void *addr; -- -- entry = (entry + 1) % NUM_TX_DESC; -- -- txd = tp->TxDescArray + entry; -- len = frag->size; -- addr = ((void *) page_address(frag->page)) + frag->page_offset; -- mapping = pci_map_single(tp->pci_dev, addr, len, PCI_DMA_TODEVICE); - -- /* anti gcc 2.95.3 bugware (sic) */ -- status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC)); - -- txd->opts1 = cpu_to_le32(status); -- txd->addr = cpu_to_le64(mapping); - -- tp->tx_skb[entry].len = len; -- } - -- if (cur_frag) { -- tp->tx_skb[entry].skb = skb; -- txd->opts1 |= cpu_to_le32(LastFrag); -- } - -- return cur_frag; --} - --static inline u32 rtl8169_tso_csum(struct sk_buff *skb, struct net_device *dev) -+//====================================================================================================== -+static void rtl8169_tx_interrupt (struct net_device *dev, struct rtl8169_private *priv, unsigned long ioaddr) - { -- if (dev->features & NETIF_F_TSO) { -- u32 mss = skb_shinfo(skb)->tso_size; -- -- if (mss) -- return LargeSend | ((mss & MSSMask) << MSSShift); -+ unsigned long dirty_tx, tx_left=0; -+ int entry = priv->cur_tx % NUM_TX_DESC; -+ int txloop_cnt = 0; -+ -+ assert (dev != NULL); -+ assert (priv != NULL); -+ assert (ioaddr != NULL); -+ -+ -+ dirty_tx = priv->dirty_tx; -+ tx_left = priv->cur_tx - dirty_tx; -+ -+ while( (tx_left > 0) && (txloop_cnt < max_interrupt_work) ){ -+ if( (le32_to_cpu(priv->TxDescArray[entry].status) & OWNbit) == 0 ){ -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ r8169_callback_tx(&(priv->rt), 1, priv->Tx_skbuff[dirty_tx % NUM_TX_DESC]->len); -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ dev_kfree_skb_irq( priv->Tx_skbuff[dirty_tx % NUM_TX_DESC] ); -+ priv->Tx_skbuff[dirty_tx % NUM_TX_DESC] = NULL; -+ priv->stats.tx_packets++; -+ dirty_tx++; -+ tx_left--; -+ entry++; -+ } -+ txloop_cnt ++; - } -- if (skb->ip_summed == CHECKSUM_HW) { -- const struct iphdr *ip = skb->nh.iph; - -- if (ip->protocol == IPPROTO_TCP) -- return IPCS | TCPCS; -- else if (ip->protocol == IPPROTO_UDP) -- return IPCS | UDPCS; -- WARN_ON(1); /* we need a WARN() */ -+ if (priv->dirty_tx != dirty_tx) { -+ priv->dirty_tx = dirty_tx; -+ if (netif_queue_stopped (dev)) -+ netif_wake_queue (dev); - } -- return 0; - } - --static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- unsigned int frags, entry = tp->cur_tx % NUM_TX_DESC; -- struct TxDesc *txd = tp->TxDescArray + entry; -- void __iomem *ioaddr = tp->mmio_addr; -- dma_addr_t mapping; -- u32 status, len; -- u32 opts1; -- int ret = 0; -- -- if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) { -- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", -- dev->name); -- goto err_stop; -- } - -- if (unlikely(le32_to_cpu(txd->opts1) & DescOwn)) -- goto err_stop; - -- opts1 = DescOwn | rtl8169_tso_csum(skb, dev); - -- frags = rtl8169_xmit_frags(tp, skb, opts1); -- if (frags) { -- len = skb_headlen(skb); -- opts1 |= FirstFrag; -- } else { -- len = skb->len; - -- if (unlikely(len < ETH_ZLEN)) { -- skb = skb_padto(skb, ETH_ZLEN); -- if (!skb) -- goto err_update_stats; -- len = ETH_ZLEN; -- } - -- opts1 |= FirstFrag | LastFrag; -- tp->tx_skb[entry].skb = skb; -- } -+//====================================================================================================== -+static void rtl8169_rx_interrupt (struct net_device *dev, struct rtl8169_private *priv, unsigned long ioaddr) -+{ -+ struct pci_dev *pdev = priv->pci_dev; -+ int cur_rx; -+ int pkt_size = 0 ; -+ int rxdesc_cnt = 0; -+ int ret; -+ struct sk_buff *n_skb = NULL; -+ struct sk_buff *cur_skb; -+ struct sk_buff *rx_skb; -+ struct RxDesc *rxdesc; -+ -+ assert (dev != NULL); -+ assert (priv != NULL); -+ assert (ioaddr != NULL); -+ -+ -+ cur_rx = priv->cur_rx; -+ -+ rxdesc = &priv->RxDescArray[cur_rx]; -+ pci_dma_sync_single_for_device(pdev, priv->rxdesc_array_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE); -+ -+ while ( ((le32_to_cpu(rxdesc->status) & OWNbit)== 0) && (rxdesc_cnt < max_interrupt_work) ){ -+ -+ rxdesc_cnt++; -+ -+ if( le32_to_cpu(rxdesc->status) & RxRES ){ -+ printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); -+ priv->stats.rx_errors++; -+ if ( le32_to_cpu(rxdesc->status) & (RxRWT|RxRUNT) ) -+ priv->stats.rx_length_errors++; -+ if ( le32_to_cpu(rxdesc->status) & RxCRC) -+ priv->stats.rx_crc_errors++; -+ } -+ else{ -+ pkt_size=(int)(le32_to_cpu(rxdesc->status) & 0x00001FFF)-4; -+ -+ if( pkt_size > priv->rx_pkt_len ){ -+ printk("%s: Error -- Rx packet size(%d) > mtu(%d)+14\n", dev->name, pkt_size, dev->mtu); -+ pkt_size = priv->rx_pkt_len; -+ } - -- mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE); -+ DBG_PRINT("%s: RX pkt_size = %d\n", __FUNCTION__, pkt_size); - -- tp->tx_skb[entry].len = len; -- txd->addr = cpu_to_le64(mapping); -- txd->opts2 = cpu_to_le32(rtl8169_tx_vlan_tag(tp, skb)); -+ {// ----------------------------------------------------- -+ rx_skb = priv->Rx_skbuff[cur_rx]; -+ n_skb = RTL8169_ALLOC_RXSKB(MAX_RX_SKBDATA_SIZE); -+ if( n_skb != NULL ) { -+ skb_reserve (n_skb, 2); // 16 byte align the IP fields. // - -- wmb(); -+ // Indicate rx_skb -+ if( rx_skb != NULL ){ -+ rx_skb->dev = dev; -+ pci_dma_sync_single_for_device(pdev, priv->rx_skbuff_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE); - -- /* anti gcc 2.95.3 bugware (sic) */ -- status = opts1 | len | (RingEnd * !((entry + 1) % NUM_TX_DESC)); -- txd->opts1 = cpu_to_le32(status); -+ skb_put ( rx_skb, pkt_size ); -+ rx_skb->protocol = eth_type_trans ( rx_skb, dev ); -+ ret = RTL8169_NETIF_RX (rx_skb); - -- dev->trans_start = jiffies; -+// dev->last_rx = jiffies; -+ priv->stats.rx_bytes += pkt_size; -+ priv->stats.rx_packets++; - -- tp->cur_tx += frags + 1; -+#ifdef RTL8169_DYNAMIC_CONTROL -+ r8169_callback_rx( &(priv->rt), 1, pkt_size); -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL - -- smp_wmb(); -+ }//end if( rx_skb != NULL ) - -- RTL_W8(TxPoll, 0x40); /* set polling bit */ -+ priv->Rx_skbuff[cur_rx] = n_skb; -+ } -+ else{ -+ DBG_PRINT("%s: Allocate n_skb failed!\n",__FUNCTION__ ); -+ priv->Rx_skbuff[cur_rx] = rx_skb; -+ } - -- if (TX_BUFFS_AVAIL(tp) < MAX_SKB_FRAGS) { -- netif_stop_queue(dev); -- smp_rmb(); -- if (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS) -- netif_wake_queue(dev); -- } - --out: -- return ret; -+ // Update rx descriptor -+ if( cur_rx == (NUM_RX_DESC-1) ){ -+ priv->RxDescArray[cur_rx].status = cpu_to_le32((OWNbit | EORbit) | (unsigned long)priv->hw_rx_pkt_len); -+ } -+ else{ -+ priv->RxDescArray[cur_rx].status = cpu_to_le32(OWNbit | (unsigned long)priv->hw_rx_pkt_len); -+ } - --err_stop: -- netif_stop_queue(dev); -- ret = 1; --err_update_stats: -- tp->stats.tx_dropped++; -- goto out; --} -+ cur_skb = priv->Rx_skbuff[cur_rx]; - --static void rtl8169_pcierr_interrupt(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- struct pci_dev *pdev = tp->pci_dev; -- void __iomem *ioaddr = tp->mmio_addr; -- u16 pci_status, pci_cmd; -+ if( cur_skb != NULL ){ -+ priv->rx_skbuff_dma_addr[cur_rx] = pci_map_single(pdev, cur_skb->data, MAX_RX_SKBDATA_SIZE, PCI_DMA_FROMDEVICE); -+ rxdesc->buf_addr = cpu_to_le32(priv->rx_skbuff_dma_addr[cur_rx]); -+ } -+ else{ -+ DBG_PRINT("%s: %s() cur_skb == NULL\n", dev->name, __FUNCTION__); -+ } - -- pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd); -- pci_read_config_word(pdev, PCI_STATUS, &pci_status); -+ }//------------------------------------------------------------ - -- printk(KERN_ERR PFX "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", -- dev->name, pci_cmd, pci_status); -+ }// end of if( priv->RxDescArray[cur_rx].status & RxRES ) - -- /* -- * The recovery sequence below admits a very elaborated explanation: -- * - it seems to work; -- * - I did not see what else could be done. -- * -- * Feel free to adjust to your needs. -- */ -- pci_write_config_word(pdev, PCI_COMMAND, -- pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY); -+ cur_rx = (cur_rx +1) % NUM_RX_DESC; -+ rxdesc = &priv->RxDescArray[cur_rx]; -+ pci_dma_sync_single_for_device(pdev, priv->rxdesc_array_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE); - -- pci_write_config_word(pdev, PCI_STATUS, -- pci_status & (PCI_STATUS_DETECTED_PARITY | -- PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT | -- PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_SIG_TARGET_ABORT)); -+ }// end of while ( (priv->RxDescArray[cur_rx].status & 0x80000000)== 0) - -- /* The infamous DAC f*ckup only happens at boot time */ -- if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) { -- printk(KERN_INFO PFX "%s: disabling PCI DAC.\n", dev->name); -- tp->cp_cmd &= ~PCIDAC; -- RTL_W16(CPlusCmd, tp->cp_cmd); -- dev->features &= ~NETIF_F_HIGHDMA; -- rtl8169_schedule_work(dev, rtl8169_reinit_task); -+ if( rxdesc_cnt >= max_interrupt_work ){ -+ DBG_PRINT("%s: Too much work at Rx interrupt.\n", dev->name); - } - -- rtl8169_hw_reset(ioaddr); -+ priv->cur_rx = cur_rx; - } - --static void --rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, -- void __iomem *ioaddr) --{ -- unsigned int dirty_tx, tx_left; - -- assert(dev != NULL); -- assert(tp != NULL); -- assert(ioaddr != NULL); - -- dirty_tx = tp->dirty_tx; -- smp_rmb(); -- tx_left = tp->cur_tx - dirty_tx; - -- while (tx_left > 0) { -- unsigned int entry = dirty_tx % NUM_TX_DESC; -- struct ring_info *tx_skb = tp->tx_skb + entry; -- u32 len = tx_skb->len; -- u32 status; - -- rmb(); -- status = le32_to_cpu(tp->TxDescArray[entry].opts1); -- if (status & DescOwn) -- break; - -- tp->stats.tx_bytes += len; -- tp->stats.tx_packets++; - -- rtl8169_unmap_tx_skb(tp->pci_dev, tx_skb, tp->TxDescArray + entry); - -- if (status & LastFrag) { -- dev_kfree_skb_irq(tx_skb->skb); -- tx_skb->skb = NULL; -- } -- dirty_tx++; -- tx_left--; -- } -+//====================================================================================================== -+/* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+static void rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -+#else -+static irqreturn_t rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -+#endif -+{ -+ struct net_device *dev = (struct net_device *) dev_instance; -+ struct rtl8169_private *priv = dev->priv; -+ int boguscnt = max_interrupt_work; -+ unsigned long ioaddr = priv->ioaddr; -+ int status = 0; -+ irqreturn_t interrupt_handled = IRQ_NONE; - -- if (tp->dirty_tx != dirty_tx) { -- tp->dirty_tx = dirty_tx; -- smp_wmb(); -- if (netif_queue_stopped(dev) && -- (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) { -- netif_wake_queue(dev); -- } -- } --} -+ RTL_W16 ( IntrMask, 0x0000); - --static inline int rtl8169_fragmented_frame(u32 status) --{ -- return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); --} -+ do { -+ status = RTL_R16(IntrStatus); - --static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) --{ -- u32 opts1 = le32_to_cpu(desc->opts1); -- u32 status = opts1 & RxProtoMask; -+ if (status == 0xFFFF) -+ break; - -- if (((status == RxProtoTCP) && !(opts1 & TCPFail)) || -- ((status == RxProtoUDP) && !(opts1 & UDPFail)) || -- ((status == RxProtoIP) && !(opts1 & IPFail))) -- skb->ip_summed = CHECKSUM_UNNECESSARY; -- else -- skb->ip_summed = CHECKSUM_NONE; --} - --static inline int rtl8169_try_rx_copy(struct sk_buff **sk_buff, int pkt_size, -- struct RxDesc *desc, int rx_buf_sz) --{ -- int ret = -1; -+ RTL_W16( IntrStatus, status ); - -- if (pkt_size < rx_copybreak) { -- struct sk_buff *skb; - -- skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN); -- if (skb) { -- skb_reserve(skb, NET_IP_ALIGN); -- eth_copy_and_sum(skb, sk_buff[0]->tail, pkt_size, 0); -- *sk_buff = skb; -- rtl8169_mark_to_asic(desc, rx_buf_sz); -- ret = 0; -- } -- } -- return ret; --} -+ if ( (status & rtl8169_intr_mask ) == 0 ) -+ break; -+ else -+ interrupt_handled = IRQ_HANDLED; - --static int --rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, -- void __iomem *ioaddr) --{ -- unsigned int cur_rx, rx_left; -- unsigned int delta, count; - -- assert(dev != NULL); -- assert(tp != NULL); -- assert(ioaddr != NULL); -+ // Rx interrupt -+// if (status & (RxOK | RxErr /* | LinkChg | RxOverflow | RxFIFOOver*/)){ -+ rtl8169_rx_interrupt (dev, priv, ioaddr); -+// } -+ -+ // Tx interrupt -+// if (status & (TxOK | TxErr)) { -+ spin_lock (&priv->lock); -+ rtl8169_tx_interrupt (dev, priv, ioaddr); -+ spin_unlock (&priv->lock); -+// } - -- cur_rx = tp->cur_rx; -- rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; -- rx_left = rtl8169_rx_quota(rx_left, (u32) dev->quota); -+ boguscnt--; -+ } while (boguscnt > 0); - -- while (rx_left > 0) { -- unsigned int entry = cur_rx % NUM_RX_DESC; -- struct RxDesc *desc = tp->RxDescArray + entry; -- u32 status; -+ if (boguscnt <= 0) { -+ DBG_PRINT("%s: Too much work at interrupt!\n", dev->name); -+ RTL_W16( IntrStatus, 0xffff); // Clear all interrupt sources -+ } - -- rmb(); -- status = le32_to_cpu(desc->opts1); -+ RTL_W16 ( IntrMask, rtl8169_intr_mask); - -- if (status & DescOwn) -- break; -- if (status & RxRES) { -- printk(KERN_INFO "%s: Rx ERROR. status = %08x\n", -- dev->name, status); -- tp->stats.rx_errors++; -- if (status & (RxRWT | RxRUNT)) -- tp->stats.rx_length_errors++; -- if (status & RxCRC) -- tp->stats.rx_crc_errors++; -- rtl8169_mark_to_asic(desc, tp->rx_buf_sz); -- } else { -- struct sk_buff *skb = tp->Rx_skbuff[entry]; -- int pkt_size = (status & 0x00001FFF) - 4; -- void (*pci_action)(struct pci_dev *, dma_addr_t, -- size_t, int) = pci_dma_sync_single_for_device; -- -- /* -- * The driver does not support incoming fragmented -- * frames. They are seen as a symptom of over-mtu -- * sized frames. -- */ -- if (unlikely(rtl8169_fragmented_frame(status))) { -- tp->stats.rx_dropped++; -- tp->stats.rx_length_errors++; -- rtl8169_mark_to_asic(desc, tp->rx_buf_sz); -- goto move_on; -- } -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0) -+ return interrupt_handled; -+#endif -+} - -- rtl8169_rx_csum(skb, desc); -- -- pci_dma_sync_single_for_cpu(tp->pci_dev, -- le64_to_cpu(desc->addr), tp->rx_buf_sz, -- PCI_DMA_FROMDEVICE); -- -- if (rtl8169_try_rx_copy(&skb, pkt_size, desc, -- tp->rx_buf_sz)) { -- pci_action = pci_unmap_single; -- tp->Rx_skbuff[entry] = NULL; -- } - -- pci_action(tp->pci_dev, le64_to_cpu(desc->addr), -- tp->rx_buf_sz, PCI_DMA_FROMDEVICE); - -- skb->dev = dev; -- skb_put(skb, pkt_size); -- skb->protocol = eth_type_trans(skb, dev); -- -- if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0) -- rtl8169_rx_skb(skb); -- -- dev->last_rx = jiffies; -- tp->stats.rx_bytes += pkt_size; -- tp->stats.rx_packets++; -- } --move_on: -- cur_rx++; -- rx_left--; -- } -- -- count = cur_rx - tp->cur_rx; -- tp->cur_rx = cur_rx; -- -- delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); -- if (!delta && count) -- printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name); -- tp->dirty_rx += delta; -- -- /* -- * FIXME: until there is periodic timer to try and refill the ring, -- * a temporary shortage may definitely kill the Rx process. -- * - disable the asic to try and avoid an overflow and kick it again -- * after refill ? -- * - how do others driver handle this condition (Uh oh...). -- */ -- if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) -- printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name); - -- return count; --} - --/* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */ --static irqreturn_t --rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) -+ -+ -+//====================================================================================================== -+static int rtl8169_close (struct net_device *dev) - { -- struct net_device *dev = (struct net_device *) dev_instance; -- struct rtl8169_private *tp = netdev_priv(dev); -- int boguscnt = max_interrupt_work; -- void __iomem *ioaddr = tp->mmio_addr; -- int status; -- int handled = 0; -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ int i; - -- do { -- status = RTL_R16(IntrStatus); -+ // ----------------------------------------- -+ rtl8169_delete_timer( &(priv->r8169_timer) ); - -- /* hotplug/major error/no more work/shared irq */ -- if ((status == 0xFFFF) || !status) -- break; - -- handled = 1; -+ netif_stop_queue (dev); - -- if (unlikely(!netif_running(dev))) { -- rtl8169_asic_down(ioaddr); -- goto out; -- } -+ spin_lock_irq (&priv->lock); - -- status &= tp->intr_mask; -- RTL_W16(IntrStatus, -- (status & RxFIFOOver) ? (status | RxOverflow) : status); -+ /* Stop the chip's Tx and Rx processes. */ -+ RTL_W8 ( ChipCmd, 0x00); - -- if (!(status & rtl8169_intr_mask)) -- break; -+ /* Disable interrupts by clearing the interrupt mask. */ -+ RTL_W16 ( IntrMask, 0x0000); - -- if (unlikely(status & SYSErr)) { -- rtl8169_pcierr_interrupt(dev); -- break; -- } -+ /* Update the error counts. */ -+ priv->stats.rx_missed_errors += RTL_R32(RxMissed); -+ RTL_W32( RxMissed, 0); - -- if (status & LinkChg) -- rtl8169_check_link_status(dev, tp, ioaddr); -+ spin_unlock_irq (&priv->lock); - --#ifdef CONFIG_R8169_NAPI -- RTL_W16(IntrMask, rtl8169_intr_mask & ~rtl8169_napi_event); -- tp->intr_mask = ~rtl8169_napi_event; -- -- if (likely(netif_rx_schedule_prep(dev))) -- __netif_rx_schedule(dev); -- else { -- printk(KERN_INFO "%s: interrupt %04x taken in poll\n", -- dev->name, status); -- } -- break; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ synchronize_irq (); - #else -- /* Rx interrupt */ -- if (status & (RxOK | RxOverflow | RxFIFOOver)) { -- rtl8169_rx_interrupt(dev, tp, ioaddr); -- } -- /* Tx interrupt */ -- if (status & (TxOK | TxErr)) -- rtl8169_tx_interrupt(dev, tp, ioaddr); -+ synchronize_irq (dev->irq); - #endif -+ free_irq (dev->irq, dev); - -- boguscnt--; -- } while (boguscnt > 0); -+ rtl8169_tx_clear (priv); -+ -+ //2004-05-11 -+ if(priv->txdesc_space != NULL){ -+ pci_free_consistent( -+ priv->pci_dev, -+ priv->sizeof_txdesc_space, -+ priv->txdesc_space, -+ priv->txdesc_phy_dma_addr -+ ); -+ priv->txdesc_space = NULL; -+ } -+ -+ if(priv->rxdesc_space != NULL){ -+ pci_free_consistent( -+ priv->pci_dev, -+ priv->sizeof_rxdesc_space, -+ priv->rxdesc_space, -+ priv->rxdesc_phy_dma_addr -+ ); -+ priv->rxdesc_space = NULL; -+ } -+ -+ priv->TxDescArray = NULL; -+ priv->RxDescArray = NULL; -+ -+ {//----------------------------------------------------------------------------- -+ for(i=0;i<NUM_RX_DESC;i++){ -+ if( priv->Rx_skbuff[i] != NULL ) { -+ RTL8169_FREE_RXSKB ( priv->Rx_skbuff[i] ); -+ } -+ } -+ }//----------------------------------------------------------------------------- - -- if (boguscnt <= 0) { -- printk(KERN_WARNING "%s: Too much work at interrupt!\n", -- dev->name); -- /* Clear all interrupt sources. */ -- RTL_W16(IntrStatus, 0xffff); -- } --out: -- return IRQ_RETVAL(handled); --} -- --#ifdef CONFIG_R8169_NAPI --static int rtl8169_poll(struct net_device *dev, int *budget) --{ -- unsigned int work_done, work_to_do = min(*budget, dev->quota); -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- -- work_done = rtl8169_rx_interrupt(dev, tp, ioaddr); -- rtl8169_tx_interrupt(dev, tp, ioaddr); -- -- *budget -= work_done; -- dev->quota -= work_done; -- -- if (work_done < work_to_do) { -- netif_rx_complete(dev); -- tp->intr_mask = 0xffff; -- /* -- * 20040426: the barrier is not strictly required but the -- * behavior of the irq handler could be less predictable -- * without it. Btw, the lack of flush for the posted pci -- * write is safe - FR -- */ -- smp_wmb(); -- RTL_W16(IntrMask, rtl8169_intr_mask); -- } -+ DBG_PRINT("%s: %s() alloc_rxskb_cnt = %d\n", dev->name, __FUNCTION__, alloc_rxskb_cnt ); - -- return (work_done >= work_to_do); -+ return 0; - } --#endif - --static void rtl8169_down(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- unsigned int poll_locked = 0; - -- rtl8169_delete_timer(dev); - -- netif_stop_queue(dev); - -- flush_scheduled_work(); - --core_down: -- spin_lock_irq(&tp->lock); - -- rtl8169_asic_down(ioaddr); - -- /* Update the error counts. */ -- tp->stats.rx_missed_errors += RTL_R32(RxMissed); -- RTL_W32(RxMissed, 0); -- -- spin_unlock_irq(&tp->lock); -- -- synchronize_irq(dev->irq); -+//====================================================================================================== -+static unsigned const ethernet_polynomial = 0x04c11db7U; -+static inline u32 ether_crc (int length, unsigned char *data) -+{ -+ int crc = -1; - -- if (!poll_locked) { -- netif_poll_disable(dev); -- poll_locked++; -+ while (--length >= 0) { -+ unsigned char current_octet = *data++; -+ int bit; -+ for (bit = 0; bit < 8; bit++, current_octet >>= 1) -+ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0); - } - -- /* Give a racing hard_start_xmit a few cycles to complete. */ -- synchronize_sched(); /* FIXME: should this be synchronize_irq()? */ -- -- /* -- * And now for the 50k$ question: are IRQ disabled or not ? -- * -- * Two paths lead here: -- * 1) dev->close -- * -> netif_running() is available to sync the current code and the -- * IRQ handler. See rtl8169_interrupt for details. -- * 2) dev->change_mtu -- * -> rtl8169_poll can not be issued again and re-enable the -- * interruptions. Let's simply issue the IRQ down sequence again. -- */ -- if (RTL_R16(IntrMask)) -- goto core_down; -- -- rtl8169_tx_clear(tp); -- -- rtl8169_rx_clear(tp); -+ return crc; - } - --static int rtl8169_close(struct net_device *dev) --{ -- struct rtl8169_private *tp = netdev_priv(dev); -- struct pci_dev *pdev = tp->pci_dev; - -- rtl8169_down(dev); - -- free_irq(dev->irq, dev); - -- netif_poll_enable(dev); - -- pci_free_consistent(pdev, R8169_RX_RING_BYTES, tp->RxDescArray, -- tp->RxPhyAddr); -- pci_free_consistent(pdev, R8169_TX_RING_BYTES, tp->TxDescArray, -- tp->TxPhyAddr); -- tp->TxDescArray = NULL; -- tp->RxDescArray = NULL; - -- return 0; --} - --static void --rtl8169_set_rx_mode(struct net_device *dev) -+ -+//====================================================================================================== -+static void rtl8169_set_rx_mode (struct net_device *dev) - { -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; - unsigned long flags; - u32 mc_filter[2]; /* Multicast hash filter */ - int i, rx_mode; -- u32 tmp = 0; -+ u32 tmp=0; -+ - - if (dev->flags & IFF_PROMISC) { - /* Unconditionally log net taps. */ -- printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", -- dev->name); -- rx_mode = -- AcceptBroadcast | AcceptMulticast | AcceptMyPhys | -- AcceptAllPhys; -+ printk (KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); -+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys; - mc_filter[1] = mc_filter[0] = 0xffffffff; -- } else if ((dev->mc_count > multicast_filter_limit) -- || (dev->flags & IFF_ALLMULTI)) { -+ } else if ((dev->mc_count > multicast_filter_limit) || (dev->flags & IFF_ALLMULTI)) { - /* Too many to filter perfectly -- accept all multicasts. */ - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; - mc_filter[1] = mc_filter[0] = 0xffffffff; - } else { - struct dev_mc_list *mclist; -- rx_mode = AcceptBroadcast | AcceptMyPhys; -+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; - mc_filter[1] = mc_filter[0] = 0; -- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; -- i++, mclist = mclist->next) { -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) -+ { -+ set_bit (ether_crc (ETH_ALEN, mclist->dmi_addr) >> 26, mc_filter); -+ } -+#else -+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) -+ { - int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; -+ - mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); - rx_mode |= AcceptMulticast; - } -+#endif - } - -- spin_lock_irqsave(&tp->lock, flags); -+ spin_lock_irqsave (&priv->lock, flags); - -- tmp = rtl8169_rx_config | rx_mode | -- (RTL_R32(RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); -+ tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) & rtl_chip_info[priv->chipset].RxConfigMask); -+ -+ RTL_W32 ( RxConfig, tmp); -+ RTL_W32 ( MAR0 + 0, mc_filter[0]); -+ RTL_W32 ( MAR0 + 4, mc_filter[1]); -+ -+ spin_unlock_irqrestore (&priv->lock, flags); -+ -+}//end of rtl8169_set_rx_mode (struct net_device *dev) - -- RTL_W32(RxConfig, tmp); -- RTL_W32(MAR0 + 0, mc_filter[0]); -- RTL_W32(MAR0 + 4, mc_filter[1]); - -- spin_unlock_irqrestore(&tp->lock, flags); --} - --/** -- * rtl8169_get_stats - Get rtl8169 read/write statistics -- * @dev: The Ethernet Device to get statistics for -- * -- * Get TX/RX statistics for rtl8169 -- */ --static struct net_device_stats *rtl8169_get_stats(struct net_device *dev) -+ -+ -+ -+ -+//================================================================================ -+struct net_device_stats *rtl8169_get_stats(struct net_device *dev) -+ - { -- struct rtl8169_private *tp = netdev_priv(dev); -- void __iomem *ioaddr = tp->mmio_addr; -- unsigned long flags; -+ struct rtl8169_private *priv = dev->priv; - -- if (netif_running(dev)) { -- spin_lock_irqsave(&tp->lock, flags); -- tp->stats.rx_missed_errors += RTL_R32(RxMissed); -- RTL_W32(RxMissed, 0); -- spin_unlock_irqrestore(&tp->lock, flags); -- } -- -- return &tp->stats; -+ return &priv->stats; - } - -+ -+ -+ -+ -+ -+ -+ -+//================================================================================ - static struct pci_driver rtl8169_pci_driver = { -- .name = MODULENAME, -- .id_table = rtl8169_pci_tbl, -- .probe = rtl8169_init_one, -- .remove = __devexit_p(rtl8169_remove_one), --#ifdef CONFIG_PM -- .suspend = rtl8169_suspend, -- .resume = rtl8169_resume, --#endif -+ name: MODULENAME, -+ id_table: rtl8169_pci_tbl, -+ probe: rtl8169_init_one, -+ remove: rtl8169_remove_one, -+ suspend: NULL, -+ resume: NULL, - }; - --static int __init --rtl8169_init_module(void) -+ -+ -+ -+ -+//====================================================================================================== -+static int __init rtl8169_init_module (void) - { -- return pci_module_init(&rtl8169_pci_driver); -+ return pci_module_init (&rtl8169_pci_driver); // pci_register_driver (drv) - } - --static void __exit --rtl8169_cleanup_module(void) -+ -+ -+ -+//====================================================================================================== -+static void __exit rtl8169_cleanup_module (void) - { -- pci_unregister_driver(&rtl8169_pci_driver); -+ pci_unregister_driver (&rtl8169_pci_driver); - } - -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ -+ if( new_mtu > MAX_JUMBO_FRAME_MTU ){ -+ printk("%s: Error -- new_mtu(%d) > MAX_JUMBO_FRAME_MTU(%d).\n", dev->name, new_mtu, MAX_JUMBO_FRAME_MTU); -+ return -1; -+ } -+ -+ dev->mtu = new_mtu; -+ -+ priv->curr_mtu_size = new_mtu; -+ priv->tx_pkt_len = new_mtu + ETH_HDR_LEN; -+ priv->rx_pkt_len = new_mtu + ETH_HDR_LEN; -+ priv->hw_rx_pkt_len = priv->rx_pkt_len + 8; -+ -+ RTL_W8 ( Cfg9346, Cfg9346_Unlock); -+ RTL_W16 ( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len ); -+ RTL_W8 ( Cfg9346, Cfg9346_Lock); -+ -+ DBG_PRINT("-------------------------- \n"); -+ DBG_PRINT("dev->mtu = %d \n", dev->mtu); -+ DBG_PRINT("priv->curr_mtu_size = %d \n", priv->curr_mtu_size); -+ DBG_PRINT("priv->rx_pkt_len = %d \n", priv->rx_pkt_len); -+ DBG_PRINT("priv->tx_pkt_len = %d \n", priv->tx_pkt_len); -+ DBG_PRINT("RTL_W16( RxMaxSize, %d )\n", priv->hw_rx_pkt_len); -+ DBG_PRINT("-------------------------- \n"); -+ -+ rtl8169_close (dev); -+ rtl8169_open (dev); -+ -+ return 0; -+} -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== - module_init(rtl8169_init_module); --module_exit(rtl8169_cleanup_module); -+ module_exit(rtl8169_cleanup_module); -diff -urN linux-original/drivers/net/r8169.iomega.c linux/drivers/net/r8169.iomega.c ---- linux-original/drivers/net/r8169.iomega.c 1969-12-31 19:00:00.000000000 -0500 -+++ linux/drivers/net/r8169.iomega.c 2005-07-08 08:55:27.000000000 -0400 -@@ -0,0 +1,1915 @@ -+/* -+========================================================================= -+ r8169.c: A RealTek RTL8169s/8110s Gigabit Ethernet driver for Linux kernel 2.4.x. -+ -------------------------------------------------------------------- -+ -+ History: -+ Feb 4 2002 - created initially by ShuChen <shuchen@realtek.com.tw>. -+ May 20 2002 - Add link status force-mode and TBI mode support. -+========================================================================= -+ -+RTL8169_VERSION "1.1" <2002/10/4> -+ -+ The bit4:0 of MII register 4 is called "selector field", and have to be -+ 00001b to indicate support of IEEE std 802.3 during NWay process of -+ exchanging Link Code Word (FLP). -+ -+RTL8169_VERSION "1.2" <2003/6/17> -+ Update driver module name. -+ Modify ISR. -+ Add chip mcfg. -+ -+RTL8169_VERSION "1.3" <2003/6/20> -+ Add chip pcfg. -+ Add priv->phy_timer_t, rtl8169_phy_timer_t_handler() -+ Add rtl8169_hw_PHY_config() -+ Add rtl8169_hw_PHY_reset() -+ -+RTL8169_VERSION "1.4" <2003/7/14> -+ Add tx_bytes, rx_bytes. -+ -+RTL8169_VERSION "1.5" <2003/7/18> -+ Set 0x0000 to PHY at offset 0x0b. -+ Modify chip mcfg, pcfg -+ Force media for multiple card. -+RTL8169_VERSION "1.6" <2003/8/25> -+ Modify receive data buffer. -+ -+RTL8169_VERSION "1.7" <2003/9/18> -+ Add Jumbo Frame support. -+ -+RTL8169_VERSION "1.8" <2003/10/21> -+ Performance and CPU Utilizaion Enhancement. -+ -+RTL8169_VERSION "1.9" <2003/12/29> -+ Enable Tx/Rx flow control. -+ -+RTL8169_VERSION "2.0" <2004/03/26> -+ Beta version. -+ Support for linux 2.6.x -+ -+RTL8169_VERSION "2.1" <2004/07/05> -+ Modify parameters. -+ -+RTL8169_VERSION "2.2" <2004/08/09> -+ Add.pci_dma_sync_single. -+ Add pci_alloc_consistent()/pci_free_consistent(). -+ Revise parameters. -+ Recognize our interrupt for linux 2.6.x. -+*/ -+ -+ -+#include <linux/module.h> -+#include <linux/pci.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/delay.h> -+#include <linux/version.h> -+ -+#include <linux/timer.h> -+#include <linux/init.h> -+ -+ -+#define RTL8169_VERSION "2.2" -+#define MODULENAME "RTL8169s/8110s" -+#define RTL8169_DRIVER_NAME MODULENAME " Gigabit Ethernet driver " RTL8169_VERSION -+#define PFX MODULENAME ": " -+ -+ -+#undef RTL8169_DEBUG -+#undef RTL8169_JUMBO_FRAME_SUPPORT -+#undef RTL8169_HW_FLOW_CONTROL_SUPPORT -+ -+ -+#undef RTL8169_IOCTL_SUPPORT -+#undef RTL8169_DYNAMIC_CONTROL -+#define RTL8169_USE_IO -+ -+ -+#ifdef RTL8169_DEBUG -+ #define assert(expr) \ -+ if(!(expr)) { printk( "Assertion failed! %s,%s,%s,line=%d\n", #expr,__FILE__,__FUNCTION__,__LINE__); } -+ #define DBG_PRINT( fmt, args...) printk("r8169: " fmt, ## args); -+#else -+ #define assert(expr) do {} while (0) -+ #define DBG_PRINT( fmt, args...) ; -+#endif // end of #ifdef RTL8169_DEBUG -+ -+ -+/* media options */ -+#define MAX_UNITS 8 -+static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; -+ -+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ -+static int max_interrupt_work = 20; -+ -+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). -+ The RTL chips use a 64 element hash table based on the Ethernet CRC. */ -+static int multicast_filter_limit = 32; -+ -+/* MAC address length*/ -+#define MAC_ADDR_LEN 6 -+ -+#define RX_FIFO_THRESH 7 /* 7 means NO threshold, Rx buffer level before first PCI xfer. */ -+#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ -+#define TX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ -+#define ETTh 0x3F /* 0x3F means NO threshold */ -+ -+#define ETH_HDR_LEN 14 -+#define DEFAULT_MTU 1500 -+#define DEFAULT_RX_BUF_LEN 1536 -+ -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+#define MAX_JUMBO_FRAME_MTU ( 10000 ) -+#define MAX_RX_SKBDATA_SIZE ( MAX_JUMBO_FRAME_MTU + ETH_HDR_LEN ) -+#else -+#define MAX_RX_SKBDATA_SIZE 1600 -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+ -+#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */ -+ -+#define NUM_TX_DESC 64 /* Number of Tx descriptor registers*/ -+#define NUM_RX_DESC 64 /* Number of Rx descriptor registers*/ -+ -+ -+#define RTL_MIN_IO_SIZE 0x80 -+#define TX_TIMEOUT (6*HZ) -+#define RTL8169_TIMER_EXPIRE_TIME 100 //100 -+ -+ -+#ifdef RTL8169_USE_IO -+#define RTL_W8(reg, val8) outb ((val8), ioaddr + (reg)) -+#define RTL_W16(reg, val16) outw ((val16), ioaddr + (reg)) -+#define RTL_W32(reg, val32) outl ((val32), ioaddr + (reg)) -+#define RTL_R8(reg) inb (ioaddr + (reg)) -+#define RTL_R16(reg) inw (ioaddr + (reg)) -+#define RTL_R32(reg) ((unsigned long) inl (ioaddr + (reg))) -+#else -+/* write/read MMIO register */ -+#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) -+#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) -+#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) -+#define RTL_R8(reg) readb (ioaddr + (reg)) -+#define RTL_R16(reg) readw (ioaddr + (reg)) -+#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg))) -+#endif -+ -+#define MCFG_METHOD_1 0x01 -+#define MCFG_METHOD_2 0x02 -+#define MCFG_METHOD_3 0x03 -+#define MCFG_METHOD_4 0x04 -+ -+#define PCFG_METHOD_1 0x01 //PHY Reg 0x03 bit0-3 == 0x0000 -+#define PCFG_METHOD_2 0x02 //PHY Reg 0x03 bit0-3 == 0x0001 -+#define PCFG_METHOD_3 0x03 //PHY Reg 0x03 bit0-3 == 0x0002 -+ -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+#include "r8169_callback.h" -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ -+const static struct { -+ const char *name; -+ u8 mcfg; /* depend on RTL8169 docs */ -+ u32 RxConfigMask; /* should clear the bits supported by this chip */ -+} rtl_chip_info[] = { -+ { "RTL8169", MCFG_METHOD_1, 0xff7e1880 }, -+ { "RTL8169s/8110s", MCFG_METHOD_2, 0xff7e1880 }, -+ { "RTL8169s/8110s", MCFG_METHOD_3, 0xff7e1880 }, -+}; -+ -+ -+static struct pci_device_id rtl8169_pci_tbl[] __devinitdata = { -+ { 0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -+#ifdef CONFIG_IOMEGA8241 -+ /* The 8169 without an i2c defaults to reporting as an 8129 */ -+ { 0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, -+#endif /* CONFIG_IOMEGA8241 */ -+ {0,}, -+}; -+ -+ -+MODULE_DEVICE_TABLE (pci, rtl8169_pci_tbl); -+ -+ -+enum RTL8169_registers { -+ MAC0 = 0x0, -+ MAR0 = 0x8, -+ TxDescStartAddr = 0x20, -+ TxHDescStartAddr= 0x28, -+ FLASH = 0x30, -+ ERSR = 0x36, -+ ChipCmd = 0x37, -+ TxPoll = 0x38, -+ IntrMask = 0x3C, -+ IntrStatus = 0x3E, -+ TxConfig = 0x40, -+ RxConfig = 0x44, -+ RxMissed = 0x4C, -+ Cfg9346 = 0x50, -+ Config0 = 0x51, -+ Config1 = 0x52, -+ Config2 = 0x53, -+ Config3 = 0x54, -+ Config4 = 0x55, -+ Config5 = 0x56, -+ MultiIntr = 0x5C, -+ PHYAR = 0x60, -+ TBICSR = 0x64, -+ TBI_ANAR = 0x68, -+ TBI_LPAR = 0x6A, -+ PHYstatus = 0x6C, -+ RxMaxSize = 0xDA, -+ CPlusCmd = 0xE0, -+ RxDescStartAddr = 0xE4, -+ ETThReg = 0xEC, -+ FuncEvent = 0xF0, -+ FuncEventMask = 0xF4, -+ FuncPresetState = 0xF8, -+ FuncForceEvent = 0xFC, -+}; -+ -+enum RTL8169_register_content { -+ /*InterruptStatusBits*/ -+ SYSErr = 0x8000, -+ PCSTimeout = 0x4000, -+ SWInt = 0x0100, -+ TxDescUnavail = 0x80, -+ RxFIFOOver = 0x40, -+ LinkChg = 0x20, -+ RxOverflow = 0x10, -+ TxErr = 0x08, -+ TxOK = 0x04, -+ RxErr = 0x02, -+ RxOK = 0x01, -+ -+ /*RxStatusDesc*/ -+ RxRES = 0x00200000, -+ RxCRC = 0x00080000, -+ RxRUNT= 0x00100000, -+ RxRWT = 0x00400000, -+ -+ /*ChipCmdBits*/ -+ CmdReset = 0x10, -+ CmdRxEnb = 0x08, -+ CmdTxEnb = 0x04, -+ RxBufEmpty = 0x01, -+ -+ /*Cfg9346Bits*/ -+ Cfg9346_Lock = 0x00, -+ Cfg9346_Unlock = 0xC0, -+ -+ /*rx_mode_bits*/ -+ AcceptErr = 0x20, -+ AcceptRunt = 0x10, -+ AcceptBroadcast = 0x08, -+ AcceptMulticast = 0x04, -+ AcceptMyPhys = 0x02, -+ AcceptAllPhys = 0x01, -+ -+ /*RxConfigBits*/ -+ RxCfgFIFOShift = 13, -+ RxCfgDMAShift = 8, -+ -+ /*TxConfigBits*/ -+ TxInterFrameGapShift = 24, -+ TxDMAShift = 8, -+ -+ /*rtl8169_PHYstatus*/ -+ TBI_Enable = 0x80, -+ TxFlowCtrl = 0x40, -+ RxFlowCtrl = 0x20, -+ _1000bpsF = 0x10, -+ _100bps = 0x08, -+ _10bps = 0x04, -+ LinkStatus = 0x02, -+ FullDup = 0x01, -+ -+ /*GIGABIT_PHY_registers*/ -+ PHY_CTRL_REG = 0, -+ PHY_STAT_REG = 1, -+ PHY_AUTO_NEGO_REG = 4, -+ PHY_1000_CTRL_REG = 9, -+ -+ /*GIGABIT_PHY_REG_BIT*/ -+ PHY_Restart_Auto_Nego = 0x0200, -+ PHY_Enable_Auto_Nego = 0x1000, -+ -+ //PHY_STAT_REG = 1; -+ PHY_Auto_Neco_Comp = 0x0020, -+ -+ //PHY_AUTO_NEGO_REG = 4; -+ PHY_Cap_10_Half = 0x0020, -+ PHY_Cap_10_Full = 0x0040, -+ PHY_Cap_100_Half = 0x0080, -+ PHY_Cap_100_Full = 0x0100, -+ -+ //PHY_1000_CTRL_REG = 9; -+ PHY_Cap_1000_Full = 0x0200, -+ -+ PHY_Cap_PAUSE = 0x0400, -+ PHY_Cap_ASYM_PAUSE = 0x0800, -+ -+ PHY_Cap_Null = 0x0, -+ -+ /*_MediaType*/ -+ _10_Half = 0x01, -+ _10_Full = 0x02, -+ _100_Half = 0x04, -+ _100_Full = 0x08, -+ _1000_Full = 0x10, -+ -+ /*_TBICSRBit*/ -+ TBILinkOK = 0x02000000, -+}; -+ -+ -+ -+enum _DescStatusBit { -+ OWNbit = 0x80000000, -+ EORbit = 0x40000000, -+ FSbit = 0x20000000, -+ LSbit = 0x10000000, -+}; -+ -+ -+struct TxDesc { -+ u32 status; -+ u32 vlan_tag; -+ u32 buf_addr; -+ u32 buf_Haddr; -+}; -+ -+struct RxDesc { -+ u32 status; -+ u32 vlan_tag; -+ u32 buf_addr; -+ u32 buf_Haddr; -+}; -+ -+ -+typedef struct timer_list rt_timer_t; -+ -+ -+struct rtl8169_private { -+ unsigned long ioaddr; /* memory map physical address*/ -+ struct pci_dev *pci_dev; /* Index of PCI device */ -+ struct net_device_stats stats; /* statistics of net device */ -+ spinlock_t lock; /* spin lock flag */ -+ int chipset; -+ int mcfg; -+ int pcfg; -+ rt_timer_t r8169_timer; -+ unsigned long expire_time; -+ -+ unsigned long phy_link_down_cnt; -+ unsigned long cur_rx; /* Index into the Rx descriptor buffer of next Rx pkt. */ -+ unsigned long cur_tx; /* Index into the Tx descriptor buffer of next Rx pkt. */ -+ unsigned long dirty_tx; -+ struct TxDesc *TxDescArray; /* Index of 256-alignment Tx Descriptor buffer */ -+ struct RxDesc *RxDescArray; /* Index of 256-alignment Rx Descriptor buffer */ -+ struct sk_buff *Tx_skbuff[NUM_TX_DESC];/* Index of Transmit data buffer */ -+ struct sk_buff *Rx_skbuff[NUM_RX_DESC];/* Receive data buffer */ -+ unsigned char drvinit_fail; -+ -+ dma_addr_t txdesc_array_dma_addr[NUM_TX_DESC]; -+ dma_addr_t rxdesc_array_dma_addr[NUM_RX_DESC]; -+ dma_addr_t rx_skbuff_dma_addr[NUM_RX_DESC]; -+ -+ void *txdesc_space; -+ dma_addr_t txdesc_phy_dma_addr; -+ int sizeof_txdesc_space; -+ -+ void *rxdesc_space; -+ dma_addr_t rxdesc_phy_dma_addr; -+ int sizeof_rxdesc_space; -+ -+ int curr_mtu_size; -+ int tx_pkt_len; -+ int rx_pkt_len; -+ -+ int hw_rx_pkt_len; -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ struct r8169_cb_t rt; -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ unsigned char linkstatus; -+}; -+ -+ -+MODULE_AUTHOR ("Realtek"); -+MODULE_DESCRIPTION ("RealTek RTL-8169 Gigabit Ethernet driver"); -+MODULE_PARM (media, "1-" __MODULE_STRING(MAX_UNITS) "i"); -+MODULE_LICENSE("GPL"); -+ -+ -+static int rtl8169_open (struct net_device *dev); -+static int rtl8169_start_xmit (struct sk_buff *skb, struct net_device *dev); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+typedef int irqreturn_t; -+#define IRQ_NONE 0 -+#define IRQ_HANDLED 1 -+static void rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -+#else -+static irqreturn_t rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs); -+#endif -+ -+static void rtl8169_init_ring (struct net_device *dev); -+static void rtl8169_hw_start (struct net_device *dev); -+static int rtl8169_close (struct net_device *dev); -+static inline u32 ether_crc (int length, unsigned char *data); -+static void rtl8169_set_rx_mode (struct net_device *dev); -+static void rtl8169_tx_timeout (struct net_device *dev); -+static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev); -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu); -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+static void rtl8169_hw_PHY_config (struct net_device *dev); -+static void rtl8169_hw_PHY_reset(struct net_device *dev); -+static const u16 rtl8169_intr_mask = LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK ; -+static const unsigned int rtl8169_rx_config = (RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift) | 0x0000000E; -+ -+ -+#define RTL8169_WRITE_GMII_REG_BIT( ioaddr, reg, bitnum, bitval )\ -+{ \ -+ int val; \ -+ if( bitval == 1 ){ val = ( RTL8169_READ_GMII_REG( ioaddr, reg ) | (bitval<<bitnum) ) & 0xffff ; } \ -+ else{ val = ( RTL8169_READ_GMII_REG( ioaddr, reg ) & (~(0x0001<<bitnum)) ) & 0xffff ; } \ -+ RTL8169_WRITE_GMII_REG( ioaddr, reg, val ); \ -+} -+ -+ -+ -+#ifdef RTL8169_DEBUG -+unsigned alloc_rxskb_cnt = 0; -+#define RTL8169_ALLOC_RXSKB(bufsize) dev_alloc_skb(bufsize); alloc_rxskb_cnt ++ ; -+#define RTL8169_FREE_RXSKB(skb) kfree_skb(skb); alloc_rxskb_cnt -- ; -+#define RTL8169_NETIF_RX(skb) netif_rx(skb); alloc_rxskb_cnt -- ; -+#else -+#define RTL8169_ALLOC_RXSKB(bufsize) dev_alloc_skb(bufsize); -+#define RTL8169_FREE_RXSKB(skb) kfree_skb(skb); -+#define RTL8169_NETIF_RX(skb) netif_rx(skb); -+#endif //end #ifdef RTL8169_DEBUG -+ -+ -+ -+ -+ -+ -+//================================================================= -+// PHYAR -+// bit Symbol -+// 31 Flag -+// 30-21 reserved -+// 20-16 5-bit GMII/MII register address -+// 15-0 16-bit GMII/MII register data -+//================================================================= -+void RTL8169_WRITE_GMII_REG( unsigned long ioaddr, int RegAddr, int value ) -+{ -+ int i; -+ -+ RTL_W32 ( PHYAR, 0x80000000 | (RegAddr&0xFF)<<16 | value); -+ udelay(1000); -+ -+ for( i = 2000; i > 0 ; i -- ){ -+ // Check if the RTL8169 has completed writing to the specified MII register -+ if( ! (RTL_R32(PHYAR)&0x80000000) ){ -+ break; -+ } -+ else{ -+ udelay(100); -+ }// end of if( ! (RTL_R32(PHYAR)&0x80000000) ) -+ }// end of for() loop -+} -+//================================================================= -+int RTL8169_READ_GMII_REG( unsigned long ioaddr, int RegAddr ) -+{ -+ int i, value = -1; -+ -+ RTL_W32 ( PHYAR, 0x0 | (RegAddr&0xFF)<<16 ); -+ udelay(1000); -+ -+ for( i = 2000; i > 0 ; i -- ){ -+ // Check if the RTL8169 has completed retrieving data from the specified MII register -+ if( RTL_R32(PHYAR) & 0x80000000 ){ -+ value = (int)( RTL_R32(PHYAR)&0xFFFF ); -+ break; -+ } -+ else{ -+ udelay(100); -+ }// end of if( RTL_R32(PHYAR) & 0x80000000 ) -+ }// end of for() loop -+ return value; -+} -+ -+ -+#ifdef RTL8169_IOCTL_SUPPORT -+#include "r8169_ioctl.c" -+#endif //end #ifdef RTL8169_IOCTL_SUPPORT -+ -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+#include "r8169_callback.c" -+#endif -+ -+ -+ -+#define rtl8169_request_timer( timer, timer_expires, timer_func, timer_data ) \ -+{ \ -+ init_timer(timer); \ -+ timer->expires = (unsigned long)(jiffies + timer_expires); \ -+ timer->data = (unsigned long)(timer_data); \ -+ timer->function = (void *)(timer_func); \ -+ add_timer(timer); \ -+ DBG_PRINT("request_timer at 0x%08lx\n", (unsigned long)timer); \ -+} -+ -+#define rtl8169_delete_timer( del_timer_t ) \ -+{ \ -+ del_timer(del_timer_t); \ -+ DBG_PRINT("delete_timer at 0x%08lx\n", (unsigned long)del_timer_t); \ -+} -+ -+#define rtl8169_mod_timer( timer, timer_expires ) \ -+{ \ -+ mod_timer( timer, jiffies + timer_expires ); \ -+} -+ -+ -+ -+ -+//====================================================================================================== -+//====================================================================================================== -+void rtl8169_phy_timer_t_handler( void *timer_data ) -+{ -+ struct net_device *dev = (struct net_device *)timer_data; -+ struct rtl8169_private *priv = (struct rtl8169_private *) (dev->priv); -+ unsigned long ioaddr = priv->ioaddr; -+ -+ assert( priv->mcfg > MCFG_METHOD_1 ); -+ assert( priv->pcfg < PCFG_METHOD_3 ); -+ -+ if( RTL_R8(PHYstatus) & LinkStatus ){ -+ priv->phy_link_down_cnt = 0 ; -+ } -+ else{ -+ priv->phy_link_down_cnt ++ ; -+ if( priv->phy_link_down_cnt >= 12 ){ -+ // If link on 1000, perform phy reset. -+ if( RTL8169_READ_GMII_REG( ioaddr, PHY_1000_CTRL_REG ) & PHY_Cap_1000_Full ) -+ { -+ DBG_PRINT("rtl8169_hw_PHY_reset\n"); -+ rtl8169_hw_PHY_reset( dev ); -+ } -+ -+ priv->phy_link_down_cnt = 0 ; -+ } -+ } -+ -+ //--------------------------------------------------------------------------- -+ //mod_timer is a more efficient way to update the expire field of an active timer. -+ //--------------------------------------------------------------------------- -+// rtl8169_mod_timer( (&priv->phy_timer_t), 100 ); -+} -+ -+ -+ -+//====================================================================================================== -+//====================================================================================================== -+void rtl8169_timer_handler( void *timer_data ) -+{ -+ struct net_device *dev = (struct net_device *)timer_data; -+ struct rtl8169_private *priv = (struct rtl8169_private *) (dev->priv); -+ -+ if( (priv->mcfg > MCFG_METHOD_1) && (priv->pcfg < PCFG_METHOD_3) ){ -+ DBG_PRINT("FIX PCS -> rtl8169_phy_timer_t_handler\n"); -+ priv->phy_link_down_cnt = 0; -+ rtl8169_phy_timer_t_handler( timer_data ); -+ } -+ -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ { -+ struct r8169_cb_t *rt = &(priv->rt); -+ if( priv->linkstatus == _1000_Full ){ -+ r8169_callback(rt); -+ } -+ } -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ -+ rtl8169_mod_timer( (&priv->r8169_timer), priv->expire_time ); -+} -+ -+ -+ -+//====================================================================================================== -+//====================================================================================================== -+static int __devinit rtl8169_init_board ( struct pci_dev *pdev, struct net_device **dev_out, unsigned long *ioaddr_out) -+{ -+ unsigned long ioaddr = 0; -+ struct net_device *dev; -+ struct rtl8169_private *priv; -+ int rc, i; -+ unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; -+ -+ -+ assert (pdev != NULL); -+ assert (ioaddr_out != NULL); -+ -+ *ioaddr_out = 0; -+ *dev_out = NULL; -+ -+ // dev zeroed in init_etherdev -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ dev = init_etherdev (NULL, sizeof (*priv)); -+#else -+ dev = alloc_etherdev (sizeof (*priv)); -+#endif -+ -+ if (dev == NULL) { -+ printk (KERN_ERR PFX "unable to alloc new ethernet\n"); -+ return -ENOMEM; -+ } -+ -+ SET_MODULE_OWNER(dev); -+ -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0) -+ SET_NETDEV_DEV(dev, &pdev->dev); -+#endif -+ -+ priv = dev->priv; -+ -+ // enable device (incl. PCI PM wakeup and hotplug setup) -+ rc = pci_enable_device (pdev); -+ if (rc) -+ goto err_out; -+ -+ mmio_start = pci_resource_start (pdev, 1); -+ mmio_end = pci_resource_end (pdev, 1); -+ mmio_flags = pci_resource_flags (pdev, 1); -+ mmio_len = pci_resource_len (pdev, 1); -+ -+ // make sure PCI base addr 1 is MMIO -+ if (!(mmio_flags & IORESOURCE_MEM)) { -+ printk (KERN_ERR PFX "region #1 not an MMIO resource, aborting\n"); -+ rc = -ENODEV; -+ goto err_out; -+ } -+ -+ // check for weird/broken PCI region reporting -+ if ( mmio_len < RTL_MIN_IO_SIZE ) { -+ printk (KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); -+ rc = -ENODEV; -+ goto err_out; -+ } -+ -+ -+ rc = pci_request_regions (pdev, dev->name); -+ if (rc) -+ goto err_out; -+ -+ // enable PCI bus-mastering -+ pci_set_master (pdev); -+ -+#ifdef RTL8169_USE_IO -+ ioaddr = pci_resource_start(pdev, 0); -+#else -+ // ioremap MMIO region -+ ioaddr = (unsigned long)ioremap (mmio_start, mmio_len); -+ if (ioaddr == 0) { -+ printk (KERN_ERR PFX "cannot remap MMIO, aborting\n"); -+ rc = -EIO; -+ goto err_out_free_res; -+ } -+#endif -+ -+ // Soft reset the chip. -+ RTL_W8 ( ChipCmd, CmdReset); -+ -+ // Check that the chip has finished the reset. -+ for (i = 1000; i > 0; i--){ -+ if ( (RTL_R8(ChipCmd) & CmdReset) == 0){ -+ break; -+ } -+ else{ -+ udelay (10); -+ } -+ } -+ -+ // identify config method -+ { -+ unsigned long val32 = (RTL_R32(TxConfig)&0x7c800000); -+ -+ if( val32 == (0x1<<28) ){ -+ priv->mcfg = MCFG_METHOD_4; -+ } -+ else if( val32 == (0x1<<26) ){ -+ priv->mcfg = MCFG_METHOD_3; -+ } -+ else if( val32 == (0x1<<23) ){ -+ priv->mcfg = MCFG_METHOD_2; -+ } -+ else if( val32 == 0x00000000 ){ -+ priv->mcfg = MCFG_METHOD_1; -+ } -+ else{ -+ priv->mcfg = MCFG_METHOD_1; -+ } -+ } -+ { -+ unsigned char val8 = (unsigned char)(RTL8169_READ_GMII_REG(ioaddr,3)&0x000f); -+ if( val8 == 0x00 ){ -+ priv->pcfg = PCFG_METHOD_1; -+ } -+ else if( val8 == 0x01 ){ -+ priv->pcfg = PCFG_METHOD_2; -+ } -+ else if( val8 == 0x02 ){ -+ priv->pcfg = PCFG_METHOD_3; -+ } -+ else{ -+ priv->pcfg = PCFG_METHOD_3; -+ } -+ } -+ -+ -+ for (i = ARRAY_SIZE (rtl_chip_info) - 1; i >= 0; i--){ -+ if (priv->mcfg == rtl_chip_info[i].mcfg) { -+ priv->chipset = i; -+ goto match; -+ } -+ } -+ -+ //if unknown chip, assume array element #0, original RTL-8169 in this case -+ //printk (KERN_DEBUG PFX "PCI device %s: unknown chip version, assuming RTL-8169\n", pdev->slot_name); -+ priv->chipset = 0; -+ -+match: -+ *ioaddr_out = ioaddr; -+ *dev_out = dev; -+ return 0; -+ -+#ifndef RTL8169_USE_IO -+err_out_free_res: -+ pci_release_regions (pdev); -+#endif -+ -+err_out: -+ unregister_netdev (dev); -+ kfree (dev); -+ return rc; -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static int __devinit rtl8169_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -+{ -+ struct net_device *dev = NULL; -+ struct rtl8169_private *priv = NULL; -+ unsigned long ioaddr = 0; -+ static int board_idx = -1; -+ int i; -+ int option = -1, Cap10_100 = 0, Cap1000 = 0; -+ -+ -+ assert (pdev != NULL); -+ assert (ent != NULL); -+ -+ board_idx++; -+ -+ -+ i = rtl8169_init_board (pdev, &dev, &ioaddr); -+ if (i < 0) { -+ return i; -+ } -+ -+ priv = dev->priv; -+ -+ assert (ioaddr != NULL); -+ assert (dev != NULL); -+ assert (priv != NULL); -+ -+ // Get MAC address // -+ for (i = 0; i < MAC_ADDR_LEN ; i++){ -+ dev->dev_addr[i] = RTL_R8( MAC0 + i ); -+ } -+ -+ dev->open = rtl8169_open; -+ dev->hard_start_xmit = rtl8169_start_xmit; -+ dev->get_stats = rtl8169_get_stats; -+ dev->stop = rtl8169_close; -+ dev->tx_timeout = rtl8169_tx_timeout; -+ dev->set_multicast_list = rtl8169_set_rx_mode; -+ dev->watchdog_timeo = TX_TIMEOUT; -+ dev->irq = pdev->irq; -+ dev->base_addr = (unsigned long) ioaddr; -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ dev->change_mtu = rtl8169_change_mtu; -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+#ifdef RTL8169_IOCTL_SUPPORT -+ dev->do_ioctl = rtl8169_ioctl; -+#endif //end #ifdef RTL8169_IOCTL_SUPPORT -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ priv->rt.dev = dev; -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ priv = dev->priv; // private data // -+ priv->pci_dev = pdev; -+ priv->ioaddr = ioaddr; -+ -+//#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ priv->curr_mtu_size = dev->mtu; -+ priv->tx_pkt_len = dev->mtu + ETH_HDR_LEN; -+ priv->rx_pkt_len = dev->mtu + ETH_HDR_LEN; -+ priv->hw_rx_pkt_len = priv->rx_pkt_len + 8; -+//#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+ DBG_PRINT("-------------------------- \n"); -+ DBG_PRINT("dev->mtu = %d \n", dev->mtu); -+ DBG_PRINT("priv->curr_mtu_size = %d \n", priv->curr_mtu_size); -+ DBG_PRINT("priv->tx_pkt_len = %d \n", priv->tx_pkt_len); -+ DBG_PRINT("priv->rx_pkt_len = %d \n", priv->rx_pkt_len); -+ DBG_PRINT("priv->hw_rx_pkt_len = %d \n", priv->hw_rx_pkt_len); -+ DBG_PRINT("-------------------------- \n"); -+ -+ spin_lock_init (&priv->lock); -+ -+ register_netdev (dev); -+ -+ pci_set_drvdata(pdev, dev); // pdev->driver_data = data; -+ -+ -+ printk (KERN_DEBUG "%s: Identified chip type is '%s'.\n",dev->name,rtl_chip_info[priv->chipset].name); -+ printk (KERN_INFO "%s: %s at 0x%lx, " -+ "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " -+ "IRQ %d\n", -+ dev->name, -+ RTL8169_DRIVER_NAME, -+ dev->base_addr, -+ dev->dev_addr[0], dev->dev_addr[1], -+ dev->dev_addr[2], dev->dev_addr[3], -+ dev->dev_addr[4], dev->dev_addr[5], -+ dev->irq); -+ -+ -+ // Config PHY -+ rtl8169_hw_PHY_config(dev); -+ -+ DBG_PRINT("Set MAC Reg C+CR Offset 0x82h = 0x01h\n"); -+ RTL_W8( 0x82, 0x01 ); -+ -+ if( priv->mcfg < MCFG_METHOD_3 ){ -+ DBG_PRINT("Set PCI Latency=0x40\n"); -+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40); -+ } -+ -+ if( priv->mcfg == MCFG_METHOD_2 ){ -+ DBG_PRINT("Set MAC Reg C+CR Offset 0x82h = 0x01h\n"); -+ RTL_W8( 0x82, 0x01 ); -+ DBG_PRINT("Set PHY Reg 0x0bh = 0x00h\n"); -+ RTL8169_WRITE_GMII_REG( ioaddr, 0x0b, 0x0000 ); //w 0x0b 15 0 0 -+ } -+ -+ // if TBI is not endbled -+ if( !(RTL_R8(PHYstatus) & TBI_Enable) ){ -+ int val = RTL8169_READ_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG ); -+ -+#ifdef RTL8169_HW_FLOW_CONTROL_SUPPORT -+ val |= PHY_Cap_PAUSE | PHY_Cap_ASYM_PAUSE ; -+#endif //end #define RTL8169_HW_FLOW_CONTROL_SUPPORT -+ -+ option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; -+ // Force RTL8169 in 10/100/1000 Full/Half mode. -+ if( option > 0 ){ -+ printk(KERN_INFO "%s: Force-mode Enabled. \n", dev->name); -+ Cap10_100 = 0; -+ Cap1000 = 0; -+ switch( option ){ -+ case _10_Half: -+ Cap10_100 = PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _10_Full: -+ Cap10_100 = PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _100_Half: -+ Cap10_100 = PHY_Cap_100_Half | PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _100_Full: -+ Cap10_100 = PHY_Cap_100_Full | PHY_Cap_100_Half | PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_Null; -+ break; -+ case _1000_Full: -+ Cap10_100 = PHY_Cap_100_Full | PHY_Cap_100_Half | PHY_Cap_10_Full | PHY_Cap_10_Half; -+ Cap1000 = PHY_Cap_1000_Full; -+ break; -+ default: -+ break; -+ } -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG, Cap10_100 | ( val&0xC1F ) ); //leave PHY_AUTO_NEGO_REG bit4:0 unchanged -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_1000_CTRL_REG, Cap1000 ); -+ } -+ else{ -+ printk(KERN_INFO "%s: Auto-negotiation Enabled.\n", dev->name); -+ -+ // enable 10/100 Full/Half Mode, leave PHY_AUTO_NEGO_REG bit4:0 unchanged -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_AUTO_NEGO_REG, -+ PHY_Cap_10_Half | PHY_Cap_10_Full | PHY_Cap_100_Half | PHY_Cap_100_Full | ( val&0xC1F ) ); -+ -+ // enable 1000 Full Mode -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_1000_CTRL_REG, PHY_Cap_1000_Full ); -+ -+ }// end of if( option > 0 ) -+ -+ -+ // Enable auto-negotiation and restart auto-nigotiation -+ RTL8169_WRITE_GMII_REG( ioaddr, PHY_CTRL_REG, PHY_Enable_Auto_Nego | PHY_Restart_Auto_Nego ); -+ udelay(100); -+ -+ // wait for auto-negotiation process -+ for( i = 10000; i > 0; i-- ){ -+ //check if auto-negotiation complete -+ if( RTL8169_READ_GMII_REG(ioaddr, PHY_STAT_REG) & PHY_Auto_Neco_Comp ){ -+ udelay(100); -+ option = RTL_R8(PHYstatus); -+ if( option & _1000bpsF ){ -+ printk(KERN_INFO "%s: 1000Mbps Full-duplex operation.\n", dev->name); -+ } -+ else{ -+ printk(KERN_INFO "%s: %sMbps %s-duplex operation.\n", dev->name, -+ (option & _100bps) ? "100" : "10", (option & FullDup) ? "Full" : "Half" ); -+ } -+ break; -+ } -+ else{ -+ udelay(100); -+ }// end of if( RTL8169_READ_GMII_REG(ioaddr, 1) & 0x20 ) -+ }// end for-loop to wait for auto-negotiation process -+ -+ option = RTL_R8(PHYstatus); -+ if( option & _1000bpsF ){ -+ priv->linkstatus = _1000_Full; -+ } -+ else{ -+ if(option & _100bps){ -+ priv->linkstatus = (option & FullDup) ? _100_Full : _100_Half; -+ } -+ else{ -+ priv->linkstatus = (option & FullDup) ? _10_Full : _10_Half; -+ } -+ } -+ DBG_PRINT("priv->linkstatus = 0x%02x\n", priv->linkstatus); -+ -+ }// end of TBI is not enabled -+ else{ -+ udelay(100); -+ DBG_PRINT("1000Mbps Full-duplex operation, TBI Link %s!\n",(RTL_R32(TBICSR) & TBILinkOK) ? "OK" : "Failed" ); -+ -+ }// end of TBI is not enabled -+ -+ return 0; -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void __devexit rtl8169_remove_one (struct pci_dev *pdev) -+{ -+ struct net_device *dev = pci_get_drvdata(pdev); -+ -+ assert (dev != NULL); -+ assert (priv != NULL); -+ -+ unregister_netdev (dev); -+ -+#ifdef RTL8169_USE_IO -+#else -+ iounmap ((void *)(dev->base_addr)); -+#endif -+ pci_release_regions (pdev); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ kfree (dev); -+#else -+ free_netdev(dev); -+#endif -+ -+ pci_set_drvdata (pdev, NULL); -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static int rtl8169_open (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ struct pci_dev *pdev = priv->pci_dev; -+ int retval; -+// u8 diff; -+// u32 TxPhyAddr, RxPhyAddr; -+ -+ -+ if( priv->drvinit_fail == 1 ){ -+ printk("%s: Gigabit driver open failed.\n", dev->name ); -+ return -ENOMEM; -+ } -+ -+ retval = request_irq (dev->irq, rtl8169_interrupt, SA_SHIRQ, dev->name, dev); -+ if (retval) { -+ return retval; -+ } -+ -+ //2004-05-11 -+ // Allocate tx/rx descriptor space -+ priv->sizeof_txdesc_space = NUM_TX_DESC * sizeof(struct TxDesc)+256; -+ priv->txdesc_space = pci_alloc_consistent( pdev, priv->sizeof_txdesc_space, &priv->txdesc_phy_dma_addr ); -+ if( priv->txdesc_space == NULL ){ -+ printk("%s: Gigabit driver alloc txdesc_space failed.\n", dev->name ); -+ return -ENOMEM; -+ } -+ priv->sizeof_rxdesc_space = NUM_RX_DESC * sizeof(struct RxDesc)+256; -+ priv->rxdesc_space = pci_alloc_consistent( pdev, priv->sizeof_rxdesc_space, &priv->rxdesc_phy_dma_addr ); -+ if( priv->rxdesc_space == NULL ){ -+ printk("%s: Gigabit driver alloc rxdesc_space failed.\n", dev->name ); -+ return -ENOMEM; -+ } -+ -+ if(priv->txdesc_phy_dma_addr & 0xff){ -+ printk("%s: Gigabit driver txdesc_phy_dma_addr is not 256-bytes-aligned.\n", dev->name ); -+ } -+ if(priv->rxdesc_phy_dma_addr & 0xff){ -+ printk("%s: Gigabit driver rxdesc_phy_dma_addr is not 256-bytes-aligned.\n", dev->name ); -+ } -+ // Set tx/rx descriptor space -+ priv->TxDescArray = (struct TxDesc *)priv->txdesc_space; -+ priv->RxDescArray = (struct RxDesc *)priv->rxdesc_space; -+ -+ { -+ int i; -+ struct sk_buff *skb = NULL; -+ -+ for(i=0;i<NUM_RX_DESC;i++){ -+ skb = RTL8169_ALLOC_RXSKB(MAX_RX_SKBDATA_SIZE); -+ if( skb != NULL ) { -+ skb_reserve (skb, 2); // 16 byte align the IP fields. // -+ priv->Rx_skbuff[i] = skb; -+ } -+ else{ -+ printk("%s: Gigabit driver failed to allocate skbuff.\n", dev->name); -+ priv->drvinit_fail = 1; -+ } -+ } -+ } -+ -+ -+ ////////////////////////////////////////////////////////////////////////////// -+ rtl8169_init_ring (dev); -+ rtl8169_hw_start (dev); -+ -+ -+ // ------------------------------------------------------ -+ DBG_PRINT("FIX PCS -> rtl8169_request_timer\n"); -+ priv->expire_time = RTL8169_TIMER_EXPIRE_TIME; -+ rtl8169_request_timer( (&priv->r8169_timer), priv->expire_time, rtl8169_timer_handler, ((void *)dev) ); //in open() -+ -+ -+ DBG_PRINT("%s: %s() alloc_rxskb_cnt = %d\n", dev->name, __FUNCTION__, alloc_rxskb_cnt ); -+ -+ return 0; -+ -+}//end of rtl8169_open (struct net_device *dev) -+ -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_hw_PHY_reset(struct net_device *dev) -+{ -+ int val, phy_reset_expiretime = 50; -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ -+ DBG_PRINT("%s: Reset RTL8169s PHY\n", dev->name); -+ -+ val = ( RTL8169_READ_GMII_REG( ioaddr, 0 ) | 0x8000 ) & 0xffff; -+ RTL8169_WRITE_GMII_REG( ioaddr, 0, val ); -+ -+ do //waiting for phy reset -+ { -+ if( RTL8169_READ_GMII_REG( ioaddr, 0 ) & 0x8000 ){ -+ phy_reset_expiretime --; -+ udelay(100); -+ } -+ else{ -+ break; -+ } -+ }while( phy_reset_expiretime >= 0 ); -+ -+ assert( phy_reset_expiretime > 0 ); -+} -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_hw_PHY_config (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ void *ioaddr = (void*)priv->ioaddr; -+ -+ DBG_PRINT("priv->mcfg=%d, priv->pcfg=%d\n",priv->mcfg,priv->pcfg); -+ -+ if( priv->mcfg == MCFG_METHOD_4 ){ -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0001 ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x09, 0x273a ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x0e, 0x7bfb ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1b, 0x841e ); -+ -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0002 ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x01, 0x90D0 ); -+ RTL8169_WRITE_GMII_REG( (unsigned long)ioaddr, 0x1F, 0x0000 ); -+ } -+ else{ -+ DBG_PRINT("priv->mcfg=%d. Discard hw PHY config.\n",priv->mcfg); -+ } -+} -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_hw_start (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ u32 i; -+ -+ -+ /* Soft reset the chip. */ -+ RTL_W8 ( ChipCmd, CmdReset); -+ -+ /* Check that the chip has finished the reset. */ -+ for (i = 1000; i > 0; i--){ -+ if ((RTL_R8( ChipCmd ) & CmdReset) == 0) break; -+ else udelay (10); -+ } -+ -+ RTL_W8 ( Cfg9346, Cfg9346_Unlock); -+ RTL_W8 ( ChipCmd, CmdTxEnb | CmdRxEnb); -+ RTL_W8 ( ETThReg, ETTh); -+ -+ // For gigabit rtl8169 -+ RTL_W16 ( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len ); -+ -+ // Set Rx Config register -+ i = rtl8169_rx_config | ( RTL_R32( RxConfig ) & rtl_chip_info[priv->chipset].RxConfigMask); -+ RTL_W32 ( RxConfig, i); -+ -+ -+ /* Set DMA burst size and Interframe Gap Time */ -+ RTL_W32 ( TxConfig, (TX_DMA_BURST << TxDMAShift) | (InterFrameGap << TxInterFrameGapShift) ); -+ -+ -+ -+ RTL_W16( CPlusCmd, RTL_R16(CPlusCmd) ); -+ -+ if( priv->mcfg == MCFG_METHOD_2 || -+ priv->mcfg == MCFG_METHOD_3) -+ { -+ RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<14)|(1<<3)) ); -+ DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3 and bit-14\n"); -+ } -+ else -+ { -+ RTL_W16( CPlusCmd, (RTL_R16(CPlusCmd)|(1<<3)) ); -+ DBG_PRINT("Set MAC Reg C+CR Offset 0xE0: bit-3.\n"); -+ } -+ -+ { -+ //RTL_W16(0xE2, 0x1517); -+ //RTL_W16(0xE2, 0x152a); -+ //RTL_W16(0xE2, 0x282a); -+ RTL_W16(0xE2, 0x0000); -+ } -+ -+ priv->cur_rx = 0; -+ -+ RTL_W32 ( TxDescStartAddr, priv->txdesc_phy_dma_addr); -+ RTL_W32 ( TxDescStartAddr + 4, 0x00); -+ RTL_W32 ( RxDescStartAddr, priv->rxdesc_phy_dma_addr); -+ RTL_W32 ( RxDescStartAddr + 4, 0x00); -+ -+ RTL_W8 ( Cfg9346, Cfg9346_Lock ); -+ udelay (10); -+ -+ RTL_W32 ( RxMissed, 0 ); -+ -+ rtl8169_set_rx_mode (dev); -+ -+ RTL_W16 ( MultiIntr, RTL_R16(MultiIntr) & 0xF000); -+ -+ RTL_W16 ( IntrMask, rtl8169_intr_mask); -+ -+ netif_start_queue (dev); -+ -+}//end of rtl8169_hw_start (struct net_device *dev) -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_init_ring (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ struct pci_dev *pdev = priv->pci_dev; -+ int i; -+ struct sk_buff *skb; -+ -+ -+ priv->cur_rx = 0; -+ priv->cur_tx = 0; -+ priv->dirty_tx = 0; -+ memset(priv->TxDescArray, 0x0, NUM_TX_DESC*sizeof(struct TxDesc)); -+ memset(priv->RxDescArray, 0x0, NUM_RX_DESC*sizeof(struct RxDesc)); -+ -+ -+ for (i=0 ; i<NUM_TX_DESC ; i++){ -+ priv->Tx_skbuff[i]=NULL; -+ priv->txdesc_array_dma_addr[i] = pci_map_single(pdev, &priv->TxDescArray[i], sizeof(struct TxDesc), PCI_DMA_TODEVICE); -+ } -+ -+ for (i=0; i <NUM_RX_DESC; i++) { -+ if(i==(NUM_RX_DESC-1)){ -+ priv->RxDescArray[i].status = cpu_to_le32((OWNbit | EORbit) | (unsigned long)priv->hw_rx_pkt_len); -+ } -+ else{ -+ priv->RxDescArray[i].status = cpu_to_le32(OWNbit | (unsigned long)priv->hw_rx_pkt_len); -+ } -+ -+ {//----------------------------------------------------------------------- -+ skb = priv->Rx_skbuff[i]; -+ priv->rx_skbuff_dma_addr[i] = pci_map_single(pdev, skb->data, MAX_RX_SKBDATA_SIZE, PCI_DMA_FROMDEVICE); -+ -+ if( skb != NULL ){ -+ priv->RxDescArray[i].buf_addr = cpu_to_le32(priv->rx_skbuff_dma_addr[i]); -+ priv->RxDescArray[i].buf_Haddr = 0; -+ } -+ else{ -+ DBG_PRINT("%s: %s() Rx_skbuff == NULL\n", dev->name, __FUNCTION__); -+ priv->drvinit_fail = 1; -+ } -+ }//----------------------------------------------------------------------- -+ priv->rxdesc_array_dma_addr[i] = pci_map_single(pdev, &priv->RxDescArray[i], sizeof(struct RxDesc), PCI_DMA_TODEVICE); -+ pci_dma_sync_single_for_device(pdev, priv->rxdesc_array_dma_addr[i], sizeof(struct RxDesc), PCI_DMA_TODEVICE); -+ } -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_tx_clear (struct rtl8169_private *priv) -+{ -+ int i; -+ -+ priv->cur_tx = 0; -+ for ( i = 0 ; i < NUM_TX_DESC ; i++ ){ -+ if ( priv->Tx_skbuff[i] != NULL ) { -+ dev_kfree_skb ( priv->Tx_skbuff[i] ); -+ priv->Tx_skbuff[i] = NULL; -+ priv->stats.tx_dropped++; -+ } -+ } -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_tx_timeout (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ u8 tmp8; -+ -+ /* disable Tx, if not already */ -+ tmp8 = RTL_R8( ChipCmd ); -+ if (tmp8 & CmdTxEnb){ -+ RTL_W8 ( ChipCmd, tmp8 & ~CmdTxEnb); -+ } -+ -+ /* Disable interrupts by clearing the interrupt mask. */ -+ RTL_W16 ( IntrMask, 0x0000); -+ -+ /* Stop a shared interrupt from scavenging while we are. */ -+ spin_lock_irq (&priv->lock); -+ rtl8169_tx_clear (priv); -+ spin_unlock_irq (&priv->lock); -+ -+ -+ rtl8169_hw_start (dev); -+ -+ netif_wake_queue (dev); -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static int rtl8169_start_xmit (struct sk_buff *skb, struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ struct pci_dev *pdev = priv->pci_dev; -+ int entry = priv->cur_tx % NUM_TX_DESC; -+ int buf_len = 60; -+ dma_addr_t txbuf_dma_addr; -+ -+ spin_lock_irq (&priv->lock); -+ -+ if( (le32_to_cpu(priv->TxDescArray[entry].status) & OWNbit)==0 ){ -+ -+ priv->Tx_skbuff[entry] = skb; -+ txbuf_dma_addr = pci_map_single(pdev, skb->data, skb->len, PCI_DMA_TODEVICE); -+ -+ priv->TxDescArray[entry].buf_addr = cpu_to_le32(txbuf_dma_addr); -+ DBG_PRINT("%s: TX pkt_size = %d\n", __FUNCTION__, skb->len); -+ if( skb->len <= priv->tx_pkt_len ){ -+ buf_len = skb->len; -+ } -+ else{ -+ printk("%s: Error -- Tx packet size(%d) > mtu(%d)+14\n", dev->name, skb->len, dev->mtu); -+ buf_len = priv->tx_pkt_len; -+ } -+ -+ if( entry != (NUM_TX_DESC-1) ){ -+ priv->TxDescArray[entry].status = cpu_to_le32((OWNbit | FSbit | LSbit) | buf_len); -+ } -+ else{ -+ priv->TxDescArray[entry].status = cpu_to_le32((OWNbit | EORbit | FSbit | LSbit) | buf_len); -+ } -+ -+ pci_dma_sync_single_for_device(pdev, priv->txdesc_array_dma_addr[entry], sizeof(struct TxDesc), PCI_DMA_TODEVICE); -+ -+ RTL_W8 ( TxPoll, 0x40); //set polling bit -+ -+ dev->trans_start = jiffies; -+ -+ priv->stats.tx_bytes += ( (skb->len > ETH_ZLEN) ? skb->len : ETH_ZLEN); -+ priv->cur_tx++; -+ }//end of if( (priv->TxDescArray[entry].status & 0x80000000)==0 ) -+ -+ spin_unlock_irq (&priv->lock); -+ -+ if ( (priv->cur_tx - NUM_TX_DESC) == priv->dirty_tx ){ -+ netif_stop_queue (dev); -+ } -+ else{ -+ if (netif_queue_stopped (dev)){ -+ netif_wake_queue (dev); -+ } -+ } -+ -+ return 0; -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_tx_interrupt (struct net_device *dev, struct rtl8169_private *priv, unsigned long ioaddr) -+{ -+ unsigned long dirty_tx, tx_left=0; -+ int entry = priv->cur_tx % NUM_TX_DESC; -+ int txloop_cnt = 0; -+ -+ assert (dev != NULL); -+ assert (priv != NULL); -+ assert (ioaddr != NULL); -+ -+ -+ dirty_tx = priv->dirty_tx; -+ tx_left = priv->cur_tx - dirty_tx; -+ -+ while( (tx_left > 0) && (txloop_cnt < max_interrupt_work) ){ -+ if( (le32_to_cpu(priv->TxDescArray[entry].status) & OWNbit) == 0 ){ -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ r8169_callback_tx(&(priv->rt), 1, priv->Tx_skbuff[dirty_tx % NUM_TX_DESC]->len); -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ dev_kfree_skb_irq( priv->Tx_skbuff[dirty_tx % NUM_TX_DESC] ); -+ priv->Tx_skbuff[dirty_tx % NUM_TX_DESC] = NULL; -+ priv->stats.tx_packets++; -+ dirty_tx++; -+ tx_left--; -+ entry++; -+ } -+ txloop_cnt ++; -+ } -+ -+ if (priv->dirty_tx != dirty_tx) { -+ priv->dirty_tx = dirty_tx; -+ if (netif_queue_stopped (dev)) -+ netif_wake_queue (dev); -+ } -+} -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_rx_interrupt (struct net_device *dev, struct rtl8169_private *priv, unsigned long ioaddr) -+{ -+ struct pci_dev *pdev = priv->pci_dev; -+ int cur_rx; -+ int pkt_size = 0 ; -+ int rxdesc_cnt = 0; -+ int ret; -+ struct sk_buff *n_skb = NULL; -+ struct sk_buff *cur_skb; -+ struct sk_buff *rx_skb; -+ struct RxDesc *rxdesc; -+ -+ assert (dev != NULL); -+ assert (priv != NULL); -+ assert (ioaddr != NULL); -+ -+ -+ cur_rx = priv->cur_rx; -+ -+ rxdesc = &priv->RxDescArray[cur_rx]; -+ pci_dma_sync_single_for_device(pdev, priv->rxdesc_array_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE); -+ -+ while ( ((le32_to_cpu(rxdesc->status) & OWNbit)== 0) && (rxdesc_cnt < max_interrupt_work) ){ -+ -+ rxdesc_cnt++; -+ -+ if( le32_to_cpu(rxdesc->status) & RxRES ){ -+ printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); -+ priv->stats.rx_errors++; -+ if ( le32_to_cpu(rxdesc->status) & (RxRWT|RxRUNT) ) -+ priv->stats.rx_length_errors++; -+ if ( le32_to_cpu(rxdesc->status) & RxCRC) -+ priv->stats.rx_crc_errors++; -+ } -+ else{ -+ pkt_size=(int)(le32_to_cpu(rxdesc->status) & 0x00001FFF)-4; -+ -+ if( pkt_size > priv->rx_pkt_len ){ -+ printk("%s: Error -- Rx packet size(%d) > mtu(%d)+14\n", dev->name, pkt_size, dev->mtu); -+ pkt_size = priv->rx_pkt_len; -+ } -+ -+ DBG_PRINT("%s: RX pkt_size = %d\n", __FUNCTION__, pkt_size); -+ -+ {// ----------------------------------------------------- -+ rx_skb = priv->Rx_skbuff[cur_rx]; -+ n_skb = RTL8169_ALLOC_RXSKB(MAX_RX_SKBDATA_SIZE); -+ if( n_skb != NULL ) { -+ skb_reserve (n_skb, 2); // 16 byte align the IP fields. // -+ -+ // Indicate rx_skb -+ if( rx_skb != NULL ){ -+ rx_skb->dev = dev; -+ pci_dma_sync_single_for_device(pdev, priv->rx_skbuff_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE); -+ -+ skb_put ( rx_skb, pkt_size ); -+ rx_skb->protocol = eth_type_trans ( rx_skb, dev ); -+ ret = RTL8169_NETIF_RX (rx_skb); -+ -+// dev->last_rx = jiffies; -+ priv->stats.rx_bytes += pkt_size; -+ priv->stats.rx_packets++; -+ -+#ifdef RTL8169_DYNAMIC_CONTROL -+ r8169_callback_rx( &(priv->rt), 1, pkt_size); -+#endif //end #ifdef RTL8169_DYNAMIC_CONTROL -+ -+ }//end if( rx_skb != NULL ) -+ -+ priv->Rx_skbuff[cur_rx] = n_skb; -+ } -+ else{ -+ DBG_PRINT("%s: Allocate n_skb failed!\n",__FUNCTION__ ); -+ priv->Rx_skbuff[cur_rx] = rx_skb; -+ } -+ -+ -+ // Update rx descriptor -+ if( cur_rx == (NUM_RX_DESC-1) ){ -+ priv->RxDescArray[cur_rx].status = cpu_to_le32((OWNbit | EORbit) | (unsigned long)priv->hw_rx_pkt_len); -+ } -+ else{ -+ priv->RxDescArray[cur_rx].status = cpu_to_le32(OWNbit | (unsigned long)priv->hw_rx_pkt_len); -+ } -+ -+ cur_skb = priv->Rx_skbuff[cur_rx]; -+ -+ if( cur_skb != NULL ){ -+ priv->rx_skbuff_dma_addr[cur_rx] = pci_map_single(pdev, cur_skb->data, MAX_RX_SKBDATA_SIZE, PCI_DMA_FROMDEVICE); -+ rxdesc->buf_addr = cpu_to_le32(priv->rx_skbuff_dma_addr[cur_rx]); -+ } -+ else{ -+ DBG_PRINT("%s: %s() cur_skb == NULL\n", dev->name, __FUNCTION__); -+ } -+ -+ }//------------------------------------------------------------ -+ -+ }// end of if( priv->RxDescArray[cur_rx].status & RxRES ) -+ -+ cur_rx = (cur_rx +1) % NUM_RX_DESC; -+ rxdesc = &priv->RxDescArray[cur_rx]; -+ pci_dma_sync_single_for_device(pdev, priv->rxdesc_array_dma_addr[cur_rx], sizeof(struct RxDesc), PCI_DMA_FROMDEVICE); -+ -+ }// end of while ( (priv->RxDescArray[cur_rx].status & 0x80000000)== 0) -+ -+ if( rxdesc_cnt >= max_interrupt_work ){ -+ DBG_PRINT("%s: Too much work at Rx interrupt.\n", dev->name); -+ } -+ -+ priv->cur_rx = cur_rx; -+} -+ -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+/* The interrupt handler does all of the Rx thread work and cleans up after the Tx thread. */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+static void rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -+#else -+static irqreturn_t rtl8169_interrupt (int irq, void *dev_instance, struct pt_regs *regs) -+#endif -+{ -+ struct net_device *dev = (struct net_device *) dev_instance; -+ struct rtl8169_private *priv = dev->priv; -+ int boguscnt = max_interrupt_work; -+ unsigned long ioaddr = priv->ioaddr; -+ int status = 0; -+ irqreturn_t interrupt_handled = IRQ_NONE; -+ -+ RTL_W16 ( IntrMask, 0x0000); -+ -+ do { -+ status = RTL_R16(IntrStatus); -+ -+ if (status == 0xFFFF) -+ break; -+ -+ -+ RTL_W16( IntrStatus, status ); -+ -+ -+ if ( (status & rtl8169_intr_mask ) == 0 ) -+ break; -+ else -+ interrupt_handled = IRQ_HANDLED; -+ -+ -+ // Rx interrupt -+// if (status & (RxOK | RxErr /* | LinkChg | RxOverflow | RxFIFOOver*/)){ -+ rtl8169_rx_interrupt (dev, priv, ioaddr); -+// } -+ -+ // Tx interrupt -+// if (status & (TxOK | TxErr)) { -+ spin_lock (&priv->lock); -+ rtl8169_tx_interrupt (dev, priv, ioaddr); -+ spin_unlock (&priv->lock); -+// } -+ -+ boguscnt--; -+ } while (boguscnt > 0); -+ -+ if (boguscnt <= 0) { -+ DBG_PRINT("%s: Too much work at interrupt!\n", dev->name); -+ RTL_W16( IntrStatus, 0xffff); // Clear all interrupt sources -+ } -+ -+ RTL_W16 ( IntrMask, rtl8169_intr_mask); -+ -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0) -+ return interrupt_handled; -+#endif -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static int rtl8169_close (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ int i; -+ -+ // ----------------------------------------- -+ rtl8169_delete_timer( &(priv->r8169_timer) ); -+ -+ -+ netif_stop_queue (dev); -+ -+ spin_lock_irq (&priv->lock); -+ -+ /* Stop the chip's Tx and Rx processes. */ -+ RTL_W8 ( ChipCmd, 0x00); -+ -+ /* Disable interrupts by clearing the interrupt mask. */ -+ RTL_W16 ( IntrMask, 0x0000); -+ -+ /* Update the error counts. */ -+ priv->stats.rx_missed_errors += RTL_R32(RxMissed); -+ RTL_W32( RxMissed, 0); -+ -+ spin_unlock_irq (&priv->lock); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ synchronize_irq (); -+#else -+ synchronize_irq (dev->irq); -+#endif -+ free_irq (dev->irq, dev); -+ -+ rtl8169_tx_clear (priv); -+ -+ //2004-05-11 -+ if(priv->txdesc_space != NULL){ -+ pci_free_consistent( -+ priv->pci_dev, -+ priv->sizeof_txdesc_space, -+ priv->txdesc_space, -+ priv->txdesc_phy_dma_addr -+ ); -+ priv->txdesc_space = NULL; -+ } -+ -+ if(priv->rxdesc_space != NULL){ -+ pci_free_consistent( -+ priv->pci_dev, -+ priv->sizeof_rxdesc_space, -+ priv->rxdesc_space, -+ priv->rxdesc_phy_dma_addr -+ ); -+ priv->rxdesc_space = NULL; -+ } -+ -+ priv->TxDescArray = NULL; -+ priv->RxDescArray = NULL; -+ -+ {//----------------------------------------------------------------------------- -+ for(i=0;i<NUM_RX_DESC;i++){ -+ if( priv->Rx_skbuff[i] != NULL ) { -+ RTL8169_FREE_RXSKB ( priv->Rx_skbuff[i] ); -+ } -+ } -+ }//----------------------------------------------------------------------------- -+ -+ DBG_PRINT("%s: %s() alloc_rxskb_cnt = %d\n", dev->name, __FUNCTION__, alloc_rxskb_cnt ); -+ -+ return 0; -+} -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static unsigned const ethernet_polynomial = 0x04c11db7U; -+static inline u32 ether_crc (int length, unsigned char *data) -+{ -+ int crc = -1; -+ -+ while (--length >= 0) { -+ unsigned char current_octet = *data++; -+ int bit; -+ for (bit = 0; bit < 8; bit++, current_octet >>= 1) -+ crc = (crc << 1) ^ ((crc < 0) ^ (current_octet & 1) ? ethernet_polynomial : 0); -+ } -+ -+ return crc; -+} -+ -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+static void rtl8169_set_rx_mode (struct net_device *dev) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ unsigned long flags; -+ u32 mc_filter[2]; /* Multicast hash filter */ -+ int i, rx_mode; -+ u32 tmp=0; -+ -+ -+ if (dev->flags & IFF_PROMISC) { -+ /* Unconditionally log net taps. */ -+ printk (KERN_NOTICE "%s: Promiscuous mode enabled.\n", dev->name); -+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys; -+ mc_filter[1] = mc_filter[0] = 0xffffffff; -+ } else if ((dev->mc_count > multicast_filter_limit) || (dev->flags & IFF_ALLMULTI)) { -+ /* Too many to filter perfectly -- accept all multicasts. */ -+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; -+ mc_filter[1] = mc_filter[0] = 0xffffffff; -+ } else { -+ struct dev_mc_list *mclist; -+ rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; -+ mc_filter[1] = mc_filter[0] = 0; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) -+ { -+ set_bit (ether_crc (ETH_ALEN, mclist->dmi_addr) >> 26, mc_filter); -+ } -+#else -+ for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) -+ { -+ int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26; -+ -+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); -+ rx_mode |= AcceptMulticast; -+ } -+#endif -+ } -+ -+ spin_lock_irqsave (&priv->lock, flags); -+ -+ tmp = rtl8169_rx_config | rx_mode | (RTL_R32(RxConfig) & rtl_chip_info[priv->chipset].RxConfigMask); -+ -+ RTL_W32 ( RxConfig, tmp); -+ RTL_W32 ( MAR0 + 0, mc_filter[0]); -+ RTL_W32 ( MAR0 + 4, mc_filter[1]); -+ -+ spin_unlock_irqrestore (&priv->lock, flags); -+ -+}//end of rtl8169_set_rx_mode (struct net_device *dev) -+ -+ -+ -+ -+ -+ -+ -+//================================================================================ -+struct net_device_stats *rtl8169_get_stats(struct net_device *dev) -+ -+{ -+ struct rtl8169_private *priv = dev->priv; -+ -+ return &priv->stats; -+} -+ -+ -+ -+ -+ -+ -+ -+ -+//================================================================================ -+static struct pci_driver rtl8169_pci_driver = { -+ name: MODULENAME, -+ id_table: rtl8169_pci_tbl, -+ probe: rtl8169_init_one, -+ remove: rtl8169_remove_one, -+ suspend: NULL, -+ resume: NULL, -+}; -+ -+ -+ -+ -+ -+//====================================================================================================== -+static int __init rtl8169_init_module (void) -+{ -+ return pci_module_init (&rtl8169_pci_driver); // pci_register_driver (drv) -+} -+ -+ -+ -+ -+//====================================================================================================== -+static void __exit rtl8169_cleanup_module (void) -+{ -+ pci_unregister_driver (&rtl8169_pci_driver); -+} -+ -+ -+#ifdef RTL8169_JUMBO_FRAME_SUPPORT -+static int rtl8169_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ struct rtl8169_private *priv = dev->priv; -+ unsigned long ioaddr = priv->ioaddr; -+ -+ if( new_mtu > MAX_JUMBO_FRAME_MTU ){ -+ printk("%s: Error -- new_mtu(%d) > MAX_JUMBO_FRAME_MTU(%d).\n", dev->name, new_mtu, MAX_JUMBO_FRAME_MTU); -+ return -1; -+ } -+ -+ dev->mtu = new_mtu; -+ -+ priv->curr_mtu_size = new_mtu; -+ priv->tx_pkt_len = new_mtu + ETH_HDR_LEN; -+ priv->rx_pkt_len = new_mtu + ETH_HDR_LEN; -+ priv->hw_rx_pkt_len = priv->rx_pkt_len + 8; -+ -+ RTL_W8 ( Cfg9346, Cfg9346_Unlock); -+ RTL_W16 ( RxMaxSize, (unsigned short)priv->hw_rx_pkt_len ); -+ RTL_W8 ( Cfg9346, Cfg9346_Lock); -+ -+ DBG_PRINT("-------------------------- \n"); -+ DBG_PRINT("dev->mtu = %d \n", dev->mtu); -+ DBG_PRINT("priv->curr_mtu_size = %d \n", priv->curr_mtu_size); -+ DBG_PRINT("priv->rx_pkt_len = %d \n", priv->rx_pkt_len); -+ DBG_PRINT("priv->tx_pkt_len = %d \n", priv->tx_pkt_len); -+ DBG_PRINT("RTL_W16( RxMaxSize, %d )\n", priv->hw_rx_pkt_len); -+ DBG_PRINT("-------------------------- \n"); -+ -+ rtl8169_close (dev); -+ rtl8169_open (dev); -+ -+ return 0; -+} -+#endif //end #ifdef RTL8169_JUMBO_FRAME_SUPPORT -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+ -+//====================================================================================================== -+module_init(rtl8169_init_module); -+ module_exit(rtl8169_cleanup_module); -diff -urN linux-original/drivers/pci/probe.c linux/drivers/pci/probe.c ---- linux-original/drivers/pci/probe.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/pci/probe.c 2005-07-08 08:55:27.000000000 -0400 -@@ -551,6 +551,20 @@ - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); - class >>= 8; /* upper 3 bytes */ - dev->class = class; -+#ifdef CONFIG_IOMEGA8241 -+ /* -+ * The VIA VT6410 used on the Iomega StorCenter Network Hard Drive reports -+ * with a class of 0x01040 (PCI_CLASS_STORAGE_RAID). -+ * -+ * The following correction allows it to be used as a standard PCI IDE -+ * controller (0x0101) -+ */ -+ if((dev->vendor==PCI_VENDOR_ID_VIA)&&(dev->device==PCI_DEVICE_ID_VIA_6410)) { -+ dev->class=0x01018f; -+ printk("PCI: Adjustments for the VIA VT6410 controller have been made\n"); -+ } -+#endif /* CONFIG_IOMEGA8241 */ -+ - class >>= 8; - - pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev), -diff -urN linux-original/drivers/serial/8250.c linux/drivers/serial/8250.c ---- linux-original/drivers/serial/8250.c 2005-06-17 15:48:29.000000000 -0400 -+++ linux/drivers/serial/8250.c 2005-07-08 09:02:11.000000000 -0400 -@@ -46,6 +46,10 @@ - - #include "8250.h" - -+#ifdef CONFIG_IOMEGA8241 -+#include <platforms/iomega8241.h> -+#endif /* CONFIG_IOMEGA8241 */ -+ - /* - * Configuration: - * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option -@@ -68,7 +72,8 @@ - #define DEBUG_INTR(fmt...) do { } while (0) - #endif - --#define PASS_LIMIT 256 -+//#define PASS_LIMIT 256 -+#define PASS_LIMIT 32 - - /* - * We default to IRQ0 for the "no irq" hack. Some -@@ -1543,7 +1548,15 @@ - * are set via set_termios(), which will be occurring imminently - * anyway, so we don't enable them here. - */ -+#ifdef CONFIG_IOMEGA8241 -+ /* We do not enable UART_IER_RLSI because it causes problem -+ * when you send data to the port before you open it. -+ * -xianghua xiao 2005.7.7 -+ */ -+ up->ier = UART_IER_RDI; -+#else - up->ier = UART_IER_RLSI | UART_IER_RDI; -+#endif /* CONFIG_IOMEGA8241 */ - serial_outp(up, UART_IER, up->ier); - - if (up->port.flags & UPF_FOURPORT) { -diff -urN linux-original/include/asm-ppc/mpc10x.h linux/include/asm-ppc/mpc10x.h ---- linux-original/include/asm-ppc/mpc10x.h 2005-06-17 15:48:29.000000000 -0400 -+++ linux/include/asm-ppc/mpc10x.h 2005-07-08 08:55:27.000000000 -0400 -@@ -76,7 +76,11 @@ - - #define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 - #define MPC10X_MAPB_PCI_IO_START 0x00000000 -+#ifdef CONFIG_IOMEGA8241 -+#define MPC10X_MAPB_PCI_IO_END 0xFFFF -+#else - #define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) -+#endif /* CONFIG_IOMEGA8241 */ - #define MPC10X_MAPB_PCI_MEM_START 0x80000000 - #define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) - -@@ -157,8 +161,11 @@ - */ - extern unsigned long ioremap_base; - #define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) -+#ifdef CONFIG_IOMEGA8241 -+#define MPC10X_MAPB_EUMB_BASE 0xFDF00000 -+#else - #define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE -- -+#endif /* CONFIG_IOMEGA8241 */ - - int mpc10x_bridge_init(struct pci_controller *hose, - uint current_map, -diff -urN linux-original/include/asm-ppc/serial.h linux/include/asm-ppc/serial.h ---- linux-original/include/asm-ppc/serial.h 2005-06-17 15:48:29.000000000 -0400 -+++ linux/include/asm-ppc/serial.h 2005-07-08 08:55:27.000000000 -0400 -@@ -40,6 +40,8 @@ - #include <asm/mpc85xx.h> - #elif defined(CONFIG_RADSTONE_PPC7D) - #include <platforms/radstone_ppc7d.h> -+#elif defined(CONFIG_IOMEGA8241) -+#include <platforms/iomega8241.h> - #else - - /* -diff -urN linux-original/include/linux/ds1337.h linux/include/linux/ds1337.h ---- linux-original/include/linux/ds1337.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux/include/linux/ds1337.h 2005-07-08 08:55:27.000000000 -0400 -@@ -0,0 +1,103 @@ -+/* -+ * include/linux/ds1337.h -+ * -+ * Copyright (C) 2005 USI(Shanghai) Co., Ltd. -+ * -+ * Original Ported by Martin. Check and clean up by Sam Song. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#include <asm/time.h> -+#include "i2c_export.h" -+ -+typedef struct _rtc_second -+{ -+ unsigned char resv:1; -+ unsigned char ten:3; -+ unsigned char one:4; -+}RTC_SECOND; -+ -+typedef struct _rtc_minute -+{ -+ unsigned char resv:1; -+ unsigned char ten:3; -+ unsigned char one:4; -+}RTC_MINUTE; -+ -+typedef struct _rtc_hour -+{ -+ unsigned char resv:1; -+ unsigned char ampm:1; -+ unsigned char ten1:1; -+ unsigned char ten2:1; -+ unsigned char one:4; -+}RTC_HOUR; -+ -+typedef struct _rtc_day -+{ -+ unsigned char resv:5; -+ unsigned char one:3; -+}RTC_DAY; -+ -+typedef struct _rtc_date -+{ -+ unsigned char resv:2; -+ unsigned char ten:2; -+ unsigned char one:4; -+}RTC_DATE; -+ -+struct _rtc_month -+{ -+ unsigned char century:1; -+ unsigned char resv:2; -+ unsigned char ten:1; -+ unsigned char one:4; -+}; -+ -+struct _rtc_year -+{ -+ unsigned char ten:4; -+ unsigned char one:4; -+}; -+ -+/* we should pay attention to the structure when it is in memory */ -+typedef struct _rtc_time -+{ -+ RTC_SECOND second; -+ RTC_MINUTE minute; -+ RTC_HOUR hour; -+ RTC_DAY day; -+ RTC_DATE date; -+ struct _rtc_month month; -+ struct _rtc_year year; -+}RTC_TIME; -+ -+/* next should be some struct for the Alarm register */ -+/* but now we don't need to implement it */ -+typedef struct _rtc_ctrl -+{ -+ unsigned char eosc:1; -+ unsigned char resv:2; -+ unsigned char rs2:1; -+ unsigned char rs1:1; -+ unsigned char intcn:1; -+ unsigned char a2ie:1; -+ unsigned char a1ie:1; -+}RTC_CTRL; -+ -+typedef struct _rtc_sts -+{ -+ unsigned char osf:1; -+ unsigned char resv:5; -+ unsigned char a2f:1; -+ unsigned char a1f:1; -+}RTC_STS; -+ -+extern long ds1337_init(void); -+extern int ds1337_set_time(unsigned long settime); -+extern unsigned long ds1337_get_time(void); -+void ds1337_usi_set_time(unsigned int year, unsigned int mon, unsigned int day, unsigned int hour, unsigned int min, unsigned int sec); -diff -urN linux-original/include/linux/i2c_export.h linux/include/linux/i2c_export.h ---- linux-original/include/linux/i2c_export.h 1969-12-31 19:00:00.000000000 -0500 -+++ linux/include/linux/i2c_export.h 2005-07-08 08:55:27.000000000 -0400 -@@ -0,0 +1,179 @@ -+/* -+ * include/linux/i2c_export.h -+ * -+ * Copyright (C) 2005 USI(Shanghai) Co., Ltd. -+ * -+ * Original Ported by Martin. Check and clean up by Sam Song. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version -+ * 2 of the License, or (at your option) any later version. -+ */ -+ -+#define I2CADR 0x00003000 -+#define I2CFDR 0x00003004 -+#define I2CCR 0x00003008 -+#define I2CSR 0x0000300C -+#define I2CDR 0x00003010 -+ -+typedef enum _i2cstatus -+{ -+ I2CSUCCESS = 0x3000, -+ I2CADDRESS, -+ I2CERROR, -+ I2CBUFFFULL, -+ I2CBUFFEMPTY, -+ I2CXMITERROR, -+ I2CRCVERROR, -+ I2CBUSBUSY, -+ I2CALOSS, -+ I2CNOEVENT, -+} I2CStatus; -+ -+/* These are the defined return values for the I2C_do_transaction function. -+ * Any non-zero value indicates failure. Failure modes can be added for -+ * more detailed error reporting. -+ */ -+typedef enum _i2c_status -+{ -+ I2C_SUCCESS = 0, -+ I2C_ERROR, -+ }I2C_Status; -+ -+typedef enum i2c_control -+{ -+ MEN = 0x00000080, -+ MIEN = 0x00000040, -+ MSTA = 0x00000020, -+ MTX = 0x00000010, -+ TXAK = 0x00000008, -+ RSTA = 0x00000004, -+} I2C_CONTROL; -+ -+typedef enum i2c_status -+{ -+ MCF = 0x00000080, -+ MAAS = 0x00000040, -+ MBB = 0x00000020, -+ MAL = 0x00000010, -+ SRW = 0x00000004, -+ MIF = 0x00000002, -+ RXAK = 0x00000001, -+} I2C_STATUS; -+ -+typedef struct _i2c_ctrl -+{ -+ unsigned int reserved0 : 24; -+ unsigned int men : 1; -+ unsigned int mien : 1; -+ unsigned int msta : 1; -+ unsigned int mtx : 1; -+ unsigned int txak : 1; -+ unsigned int rsta : 1; -+ unsigned int reserved1 : 2; -+} I2C_CTRL; -+ -+typedef struct _i2c_stat -+{ -+ unsigned int rsrv0 : 24; -+ unsigned int mcf : 1; -+ unsigned int maas : 1; -+ unsigned int mbb : 1; -+ unsigned int mal : 1; -+ unsigned int rsrv1 : 1; -+ unsigned int srw : 1; -+ unsigned int mif : 1; -+ unsigned int rxak : 1; -+} I2C_STAT; -+ -+typedef enum _i2c_mode -+{ -+ RCV = 0, -+ XMIT = 1, -+} I2C_MODE; -+ -+ -+/* These are the defined tasks for I2C_do_transaction. -+ * Modes for SLAVE_RCV and SLAVE_XMIT will be added. -+ */ -+typedef enum _i2c_transaction_mode -+{ -+ I2C_MASTER_RCV = 0, -+ I2C_MASTER_XMIT = 1, -+} I2C_TRANSACTION_MODE; -+ -+typedef enum _i2c_interrupt_mode -+{ -+ I2C_INT_DISABLE = 0, -+ I2C_INT_ENABLE = 1, -+} I2C_INTERRUPT_MODE; -+ -+typedef enum _i2c_stop -+{ -+ I2C_NO_STOP = 0, -+ I2C_STOP = 1, -+} I2C_STOP_MODE; -+ -+typedef enum _i2c_restart -+{ -+ I2C_NO_RESTART = 0, -+ I2C_RESTART = 1, -+} I2C_RESTART_MODE; -+ -+/******************** App. API ******************** -+ * The application API is for user level application -+ * to use the functionality provided by I2C driver. -+ * This is a "generic" I2C interface, it should contain -+ * nothing specific to the Kahlua implementation. -+ * Only the generic functions are exported by the library. -+ * -+ * Note: Its App.s responsibility to swap the data -+ * byte. In our API, we just transfer whatever -+ * we are given -+ **************************************************/ -+ -+/* Initialize I2C unit with the following: -+ * driver's slave address -+ * interrupt enabled -+ * optional pointer to application layer print function -+ * -+ * These parameters may be added: -+ * desired clock rate -+ * digital filter frequency sampling rate -+ * -+ * This function must be called before I2C unit can be used. -+ */ -+extern I2C_Status I2C_Initialize( -+ unsigned char addr, /* driver's I2C slave address */ -+ I2C_INTERRUPT_MODE en_int, /* 1 - enable I2C interrupt -+ * 0 - disable I2C interrupt -+ */ -+ int (*app_print_function)(char *,...)); -+ /* pointer to optional "printf" -+ * provided by application -+ */ -+ -+/* Perform the given I2C transaction, only MASTER_XMIT and MASTER_RCV -+ * are implemented. Both are only in polling mode. -+ * -+ * en_int controls interrupt/polling mode -+ * act is the type of transaction -+ * addr is the I2C address of the slave device -+ * len is the length of data to send or receive -+ * buffer is the address of the data buffer -+ * stop = I2C_NO_STOP, don't signal STOP at end of transaction -+ * I2C_STOP, signal STOP at end of transaction -+ * retry is the timeout retry value, currently ignored -+ * rsta = I2C_NO_RESTART, this is not continuation of existing transaction -+ * I2C_RESTART, this is a continuation of existing transaction -+ */ -+extern I2C_Status I2C_do_transaction( I2C_INTERRUPT_MODE en_int, -+ I2C_TRANSACTION_MODE act, -+ unsigned char i2c_addr, -+ unsigned char data_addr, -+ int len, -+ char *buffer, -+ I2C_STOP_MODE stop, -+ int retry, -+ I2C_RESTART_MODE rsta); -diff -urN linux-original/include/linux/pci_ids.h linux/include/linux/pci_ids.h ---- linux-original/include/linux/pci_ids.h 2005-06-17 15:48:29.000000000 -0400 -+++ linux/include/linux/pci_ids.h 2005-07-08 08:55:27.000000000 -0400 -@@ -1396,6 +1396,7 @@ - #define PCI_DEVICE_ID_VIA_8703_51_0 0x3148 - #define PCI_DEVICE_ID_VIA_8237_SATA 0x3149 - #define PCI_DEVICE_ID_VIA_XN266 0x3156 -+#define PCI_DEVICE_ID_VIA_6410 0x3164 - #define PCI_DEVICE_ID_VIA_8754C_0 0x3168 - #define PCI_DEVICE_ID_VIA_8235 0x3177 - #define PCI_DEVICE_ID_VIA_P4N333 0x3178 diff --git a/packages/linux/linux-storcenter/kernel.patch-2.6.15.7 b/packages/linux/linux-storcenter/kernel.patch-2.6.15.7 deleted file mode 100644 index 030ef64d2a..0000000000 --- a/packages/linux/linux-storcenter/kernel.patch-2.6.15.7 +++ /dev/null @@ -1,1181 +0,0 @@ ---- linux-2.6.15.orig/arch/ppc/platforms/iomega8241.c 1969-12-31 16:00:00.000000000 -0800 -+++ linux-2.6.15/arch/ppc/platforms/iomega8241.c 2008-01-07 16:56:45.628534603 -0800 -@@ -0,0 +1,603 @@ -+/* -+ * arch/ppc/platforms/iomega8241.c -+ * -+ * The Iomega StorCenter Network Hard Drive platform is based on the -+ * original sandpoint test platform. That GNU copyright information -+ * is reproduced below: -+ * -+ * Board setup routines for the Motorola SPS Sandpoint Test Platform. -+ * -+ * Author: Mark A. Greer -+ * mgreer@mvista.com -+ * -+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under -+ * the terms of the GNU General Public License version 2. This program -+ * is licensed "as is" without any warranty of any kind, whether express -+ * or implied. -+ */ -+ -+/* -+ * Iomega StorCenter Network Hard Drive. -+ * -+ * Maintainer (Iomega Port): Anthony Russello -+ * russello@iomega.com -+ * Much of the below code was taken from the original sandpoint.c/.h port -+ * done my Mark A. Greer (see above copyright information). It was adapted -+ * to support a custom board. -+ */ -+ -+#include <linux/config.h> -+#include <linux/stddef.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/errno.h> -+#include <linux/reboot.h> -+#include <linux/pci.h> -+#include <linux/kdev_t.h> -+#include <linux/major.h> -+#include <linux/initrd.h> -+#include <linux/console.h> -+#include <linux/delay.h> -+#include <linux/irq.h> -+#include <linux/ide.h> -+#include <linux/seq_file.h> -+#include <linux/root_dev.h> -+#include <linux/serial.h> -+#include <linux/tty.h> /* for linux/serial_core.h */ -+#include <linux/serial_8250.h> -+ -+#include <asm/system.h> -+#include <asm/pgtable.h> -+#include <asm/page.h> -+#include <asm/time.h> -+#include <asm/dma.h> -+#include <asm/io.h> -+#include <asm/machdep.h> -+#include <asm/prom.h> -+#include <asm/smp.h> -+#include <asm/vga.h> -+#include <asm/open_pic.h> -+#include <asm/todc.h> -+#include <asm/bootinfo.h> -+#include <asm/mpc10x.h> -+#include <asm/pci-bridge.h> -+#include <asm/kgdb.h> -+ -+#include "iomega8241.h" -+ -+/* Real Time Clock */ -+extern spinlock_t rtc_lock; -+extern int ds1337_do_command(int id, int cmd, void *arg); -+#define DS1337_GET_DATE 0 -+#define DS1337_SET_DATE 1 -+ -+unsigned char __res[sizeof(bd_t)]; -+ -+static void iomega8241_halt(void); -+ -+/* -+ * Define all of the IRQ senses and polarities. -+ */ -+static u_char iomega8241_openpic_initsenses[] __initdata = { -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 0: AN983B */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 1: IDE VIA DS6410 */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 2: USB */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 3: USB */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 4: USB */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 5: UART0 */ -+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 6: UART1 */ -+}; -+ -+/* -+ * Define all of the PCI IRQ Mappings -+ */ -+static inline int -+iomega8241_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -+{ -+ static char pci_irq_table[][4] = -+ /* -+ * PCI IDSEL/INTPIN->INTLINE -+ * A B C D -+ */ -+ { -+ { 1, 1, 0, 0 }, -+ { 2, 3, 4, 1 }, -+ { 0, 0, 4, 4 }, -+ { 3, 3, 4, 4 }, -+ { 3, 3, 4, 4 }, -+ }; -+ -+ const long min_idsel = 13, max_idsel = 17, irqs_per_slot = 4; -+ return PCI_IRQ_TABLE_LOOKUP; -+} -+ -+static int -+iomega8241_exclude_device(u_char bus, u_char devfn) -+{ -+ if ((bus == 0) && (PCI_SLOT(devfn) == IOMEGA8241_HOST_BRIDGE_IDSEL)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ else -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static void __init -+iomega8241_find_bridges(void) -+{ -+ struct pci_controller *hose; -+ -+ hose = pcibios_alloc_controller(); -+ -+ if (!hose) -+ return; -+ -+ hose->first_busno = 0; -+ hose->last_busno = 0x1; -+ -+ if (mpc10x_bridge_init(hose, -+ MPC10X_MEM_MAP_B, -+ MPC10X_MEM_MAP_B, -+ MPC10X_MAPB_EUMB_BASE) == 0) { -+ -+ ppc_md.pci_exclude_device = iomega8241_exclude_device; -+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); -+ ppc_md.pcibios_fixup = NULL; -+ ppc_md.pcibios_fixup_bus = NULL; -+ ppc_md.pci_swizzle = common_swizzle; -+ ppc_md.pci_map_irq = iomega8241_map_irq; -+ } -+ else { -+ if (ppc_md.progress) -+ ppc_md.progress("Bridge init failed", 0x100); -+ printk("Host bridge init failed\n"); -+ } -+ return; -+} -+ -+ -+static ulong -+get_bus_frequency(void) -+{ -+ bd_t *bp = (bd_t *)__res; -+ ulong freq; -+ if (133333332 == bp->bi_busfreq) -+ freq = 132000000; -+ if (99999999 == bp->bi_busfreq) -+ freq = 100000000; -+ return(freq); -+} -+ -+ -+static void -+iomega8241_early_serial_map(void) -+{ -+#if defined(CONFIG_SERIAL_8250) -+ struct plat_serial8250_port *pdata; -+ bd_t *binfo = (bd_t *) __res; -+ -+ pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0); -+ pdata[0].uartclk = get_bus_frequency(); -+ pdata[0].membase = (unsigned char __iomem *) IOMEGA8241_SERIAL_0; -+ -+ pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1); -+ pdata[0].uartclk = get_bus_frequency(); -+ pdata[0].membase = (unsigned char __iomem *) IOMEGA8241_SERIAL_1; -+#endif -+} -+ -+static void __init -+iomega8241_setup_arch(void) -+{ -+ int i = 0; -+ -+ loops_per_jiffy = 100000000 / HZ; -+ -+#ifdef CONFIG_BLK_DEV_INITRD -+ if (initrd_start) -+ ROOT_DEV = Root_RAM0; -+ else -+#endif -+#ifdef CONFIG_ROOT_NFS -+ ROOT_DEV = Root_NFS; -+#else -+ ROOT_DEV = Root_HDA1; -+#endif -+ -+ /* Lookup PCI host bridges */ -+ iomega8241_find_bridges(); -+ -+ iomega8241_early_serial_map(); -+ -+ printk(KERN_INFO "Iomega StorCenter Network Hard Drive\n"); -+ printk(KERN_INFO "Linux Kernel by Protium Computing\n"); -+ -+ /* DINK32 12.3 and below do not correctly enable any caches. -+ * We will do this now with good known values. Future versions -+ * of DINK32 are supposed to get this correct. -+ */ -+ if (cpu_has_feature(CPU_FTR_SPEC7450)) -+ /* 745x is different. We only want to pass along enable. */ -+ _set_L2CR(L2CR_L2E); -+ else if (cpu_has_feature(CPU_FTR_L2CR)) -+ /* All modules have 1MB of L2. We also assume that an -+ * L2 divisor of 3 will work. -+ */ -+ _set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3 -+ | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF); -+#if 0 -+ /* Untested right now. */ -+ if (cpu_has_feature(CPU_FTR_L3CR)) { -+ /* Magic value. */ -+ _set_L3CR(0x8f032000); -+ } -+#endif -+} -+ -+#define IOMEGA8241_87308_CFG_ADDR 0x15c -+#define IOMEGA8241_87308_CFG_DATA 0x15d -+ -+#define IOMEGA8241_87308_CFG_INB(addr, byte) { \ -+ outb((addr), IOMEGA8241_87308_CFG_ADDR); \ -+ (byte) = inb(IOMEGA8241_87308_CFG_DATA); \ -+} -+ -+#define IOMEGA8241_87308_CFG_OUTB(addr, byte) { \ -+ outb((addr), IOMEGA8241_87308_CFG_ADDR); \ -+ outb((byte), IOMEGA8241_87308_CFG_DATA); \ -+} -+ -+#define IOMEGA8241_87308_SELECT_DEV(dev_num) { \ -+ IOMEGA8241_87308_CFG_OUTB(0x07, (dev_num)); \ -+} -+ -+#define IOMEGA8241_87308_DEV_ENABLE(dev_num) { \ -+ IOMEGA8241_87308_SELECT_DEV(dev_num); \ -+ IOMEGA8241_87308_CFG_OUTB(0x30, 0x01); \ -+} -+ -+static int __init -+iomega8241_request_io(void) -+{ -+ request_region(0x00,0x20,"dma1"); -+ request_region(0x20,0x20,"pic1"); -+ request_region(0x40,0x20,"timer"); -+ request_region(0x80,0x10,"dma page reg"); -+ request_region(0xa0,0x20,"pic2"); -+ request_region(0xc0,0x20,"dma2"); -+ -+ return 0; -+} -+ -+arch_initcall(iomega8241_request_io); -+ -+/* -+ * Interrupt setup and service. Interrrupts on the Sandpoint come -+ * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO). -+ * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4, -+ * IDE is on EPIC 7 and 8. -+ */ -+static void __init -+iomega8241_init_IRQ(void) -+{ -+ OpenPIC_InitSenses = iomega8241_openpic_initsenses; -+ OpenPIC_NumInitSenses = sizeof(iomega8241_openpic_initsenses); -+ -+ /* -+ * We need to tell openpic_set_sources where things actually are. -+ * mpc10x_common will set up OpenPIC_Addr at ioremap(EUMB phys base + -+ * EPIC offset (0x40000)); The EPIC IRQ register address map - -+ * Interrupt Source Configuration Registers gives these numbers as -+ * offsets starting at 0x50200, we need to adjust accordingly -+ */ -+ mpc10x_set_openpic(); -+} -+ -+static int -+iomega8241_get_irq(struct pt_regs *regs) -+{ -+ int irq; -+ -+ irq = openpic_irq(); -+ if (irq == OPENPIC_VEC_SPURIOUS) -+ irq = -1; -+ -+ return irq; -+} -+ -+static u32 -+iomega8241_irq_canonicalize(u32 irq) -+{ -+ return irq; -+} -+ -+static unsigned long __init -+iomega8241_find_end_of_memory(void) -+{ -+ bd_t *bp = (bd_t *)__res; -+ -+ if (bp->bi_memsize) -+ return bp->bi_memsize; -+ -+ return 64*1024*1024; -+} -+ -+static void __init -+iomega8241_map_io(void) -+{ -+ /* changes suggested by Freescale: */ -+ io_block_mapping(0xfc000000, 0xfc000000, 0x04000000, _PAGE_IO); -+} -+ -+static void -+iomega8241_restart(char *cmd) -+{ -+ local_irq_disable(); -+ -+ /* Set exception prefix high - to the firmware */ -+ _nmask_and_or_msr(0, MSR_IP); -+ -+ for(;;); /* Spin until reset happens */ -+} -+ -+static void -+iomega8241_power_off(void) -+{ -+ local_irq_disable(); -+ for(;;); /* No way to shut power off with software */ -+ /* NOTREACHED */ -+} -+ -+static void -+iomega8241_halt(void) -+{ -+ iomega8241_power_off(); -+ /* NOTREACHED */ -+} -+ -+static int -+iomega8241_show_cpuinfo(struct seq_file *m) -+{ -+ seq_printf(m, "vendor\t\t: Iomega Corporation\n"); -+ seq_printf(m, "machine\t\t: Iomega StorCenter Network Hard Drive\n"); -+ -+ return 0; -+} -+ -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+/* -+ * IDE support. -+ */ -+static int iomega8241_ide_ports_known = 0; -+static unsigned long iomega8241_ide_regbase[MAX_HWIFS]; -+static unsigned long iomega8241_ide_ctl_regbase[MAX_HWIFS]; -+static unsigned long iomega8241_idedma_regbase; -+ -+static void -+iomega8241_ide_probe(void) -+{ -+ struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_VIA, -+ PCI_DEVICE_ID_VIA_6410, NULL); -+ -+ if (pdev) { -+ iomega8241_ide_regbase[0]=pdev->resource[0].start; -+ iomega8241_ide_regbase[1]=pdev->resource[2].start; -+ iomega8241_ide_ctl_regbase[0]=pdev->resource[1].start; -+ iomega8241_ide_ctl_regbase[1]=pdev->resource[3].start; -+ iomega8241_idedma_regbase=pdev->resource[4].start; -+ -+ printk("Found: VIA VT6410 based IDE\n"); -+ } -+ -+ iomega8241_ide_ports_known = 1; -+} -+ -+static int -+iomega8241_ide_default_irq(unsigned long base) -+{ -+ if (iomega8241_ide_ports_known == 0) -+ iomega8241_ide_probe(); -+ -+ if (base == iomega8241_ide_regbase[0]) -+ return IDE_INTRUPT; -+ else if (base == iomega8241_ide_regbase[1]) -+ return IDE_INTRUPT; -+ else -+ return 0; -+} -+ -+static unsigned long -+iomega8241_ide_default_io_base(int index) -+{ -+ if (iomega8241_ide_ports_known == 0) -+ iomega8241_ide_probe(); -+ -+ return iomega8241_ide_regbase[index]; -+} -+ -+static void __init -+iomega8241_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, -+ unsigned long ctrl_port, int *irq) -+{ -+ unsigned long reg = data_port; -+ uint alt_status_base; -+ int i; -+ -+ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { -+ hw->io_ports[i] = reg++; -+ } -+ -+ if (data_port == iomega8241_ide_regbase[0]) { -+ alt_status_base = iomega8241_ide_ctl_regbase[0] + 2; -+ hw->irq = IDE_INTRUPT; -+ } else if (data_port == iomega8241_ide_regbase[1]) { -+ alt_status_base = iomega8241_ide_ctl_regbase[1] + 2; -+ hw->irq = IDE_INTRUPT; -+ } else { -+ alt_status_base = 0; -+ hw->irq = 0; -+ } -+ -+ if (ctrl_port) { -+ hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; -+ } else { -+ hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base; -+ } -+ -+ if (irq != NULL) { -+ *irq = hw->irq; -+ } -+} -+#endif -+ -+/* -+ * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1. -+ */ -+static __inline__ void -+iomega8241_set_bat(void) -+{ -+ unsigned long bat3u, bat3l; -+ -+ __asm__ __volatile__( -+ " lis %0,0xf800\n \ -+ ori %1,%0,0x002a\n \ -+ ori %0,%0,0x0ffe\n \ -+ mtspr 0x21e,%0\n \ -+ mtspr 0x21f,%1\n \ -+ isync\n \ -+ sync " -+ : "=r" (bat3u), "=r" (bat3l)); -+} -+ -+TODC_ALLOC(); -+ -+/* Real Time Clock support. -+ * StorCenter has a DS1337 accessed by I2C. -+ */ -+static void __init -+iomega8241_calibrate_decr(void) -+{ -+ ulong freq = get_bus_frequency() / 4; -+ printk("time_init: decrementer frequency = %lu.%.6lu MHz\n", -+ freq/1000000, freq%1000000); -+ if (freq == 33000000) -+ freq += 332550; -+ -+ tb_ticks_per_jiffy = freq / HZ; -+ tb_to_us = mulhwu_scale_factor(freq, 1000000); -+ -+ return; -+} -+ -+ -+static ulong iomega8241_get_rtc_time(void) -+{ -+ struct rtc_time tm; -+ int result; -+ -+ spin_lock(&rtc_lock); -+ result = ds1337_do_command(0, DS1337_GET_DATE, &tm); -+ spin_unlock(&rtc_lock); -+ -+ if (result == 0) -+ result = mktime(tm.tm_year+1900, tm.tm_mon, tm.tm_mday, -+ tm.tm_hour, tm.tm_min, tm.tm_sec); -+ -+ return result; -+} -+ -+ -+static int iomega8241_set_rtc_time(unsigned long nowtime) -+{ -+ struct rtc_time tm; -+ int result; -+ -+ to_tm(nowtime, &tm); -+ tm.tm_year -= 1900; -+ spin_lock(&rtc_lock); -+ result = ds1337_do_command(0, DS1337_SET_DATE, &tm); -+ spin_unlock(&rtc_lock); -+ -+ return result; -+} -+ -+ -+static void __init -+iomega8241_init2(void) -+{ -+ ppc_md.set_rtc_time = iomega8241_set_rtc_time; -+ ppc_md.get_rtc_time = iomega8241_get_rtc_time; -+} -+ -+ -+void __init -+platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ parse_bootinfo(find_bootinfo()); -+ -+ /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) -+ * are non-zero, then we should use the board info from the bd_t -+ * structure and the cmdline pointed to by r6 instead of the -+ * information from birecs, if any. Otherwise, use the information -+ * from birecs as discovered by the preceeding call to -+ * parse_bootinfo(). This rule should work with both PPCBoot, which -+ * uses a bd_t board info structure, and the kernel boot wrapper, -+ * which uses birecs. -+ */ -+ if (r3 && r6) { -+ /* copy board info structure */ -+ memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); -+ /* copy command line */ -+ *(char *)(r7+KERNELBASE) = 0; -+ strcpy(cmd_line, (char *)(r6+KERNELBASE)); -+ } -+ -+#ifdef CONFIG_BLK_DEV_INITRD -+ /* take care of initrd if we have one */ -+ if (r4) { -+ initrd_start = r4 + KERNELBASE; -+ initrd_end = r5 + KERNELBASE; -+ } -+#endif /* CONFIG_BLK_DEV_INITRD */ -+ -+ /* Map in board regs, etc. */ -+ iomega8241_set_bat(); -+ -+ isa_io_base = MPC10X_MAPB_ISA_IO_BASE; -+ isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE; -+ pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET; -+ ISA_DMA_THRESHOLD = 0x00ffffff; -+ DMA_MODE_READ = 0x44; -+ DMA_MODE_WRITE = 0x48; -+ -+ ppc_md.setup_arch = iomega8241_setup_arch; -+ ppc_md.show_cpuinfo = iomega8241_show_cpuinfo; -+ ppc_md.irq_canonicalize = iomega8241_irq_canonicalize; -+ ppc_md.init_IRQ = iomega8241_init_IRQ; -+ ppc_md.get_irq = iomega8241_get_irq; -+ ppc_md.init = iomega8241_init2; -+ -+ ppc_md.restart = iomega8241_restart; -+ ppc_md.power_off = iomega8241_power_off; -+ ppc_md.halt = iomega8241_halt; -+ -+ ppc_md.find_end_of_memory = iomega8241_find_end_of_memory; -+ ppc_md.setup_io_mappings = iomega8241_map_io; -+ -+ ppc_md.time_init = NULL; -+ ppc_md.set_rtc_time = NULL; -+ ppc_md.get_rtc_time = NULL; -+ ppc_md.calibrate_decr = iomega8241_calibrate_decr; -+ -+/* -+ * extra credit: -+ * -+ * ppc_md.nvram_read_val = todc_mc146818_read_val; -+ * ppc_md.nvram_write_val = todc_mc146818_write_val; -+ */ -+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) -+ ppc_ide_md.default_irq = iomega8241_ide_default_irq; -+ ppc_ide_md.default_io_base = iomega8241_ide_default_io_base; -+ ppc_ide_md.ide_init_hwif = iomega8241_ide_init_hwif_ports; -+#endif -+ -+} ---- linux-2.6.15.orig/arch/ppc/Kconfig 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/arch/ppc/Kconfig 2008-01-01 22:12:32.365126129 -0800 -@@ -649,6 +649,15 @@ - End of Life: - - URL: <http://www.windriver.com/> - -+config IOMEGA8241 -+ bool "IOMEGA8241" -+ ---help--- -+ Iomega StorCenter Network Hard Drive -+ Manufacturer: Iomega Corporation -+ Date of Release: May 2005 -+ End of Life: - -+ URL: <http://www.iomega.com/> -+ - config SBS8260 - bool "SBS8260" - -@@ -801,7 +810,7 @@ - depends on SANDPOINT || SPRUCE || PPLUS || \ - PRPMC750 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ -- 83xx -+ 83xx || IOMEGA8241 - default y - - config FORCE -@@ -870,13 +879,13 @@ - - config MPC10X_BRIDGE - bool -- depends on POWERPMC250 || LOPEC || SANDPOINT -+ depends on POWERPMC250 || LOPEC || SANDPOINT || IOMEGA8241 - select PPC_INDIRECT_PCI - default y - - config MPC10X_OPENPIC - bool -- depends on POWERPMC250 || LOPEC || SANDPOINT -+ depends on POWERPMC250 || LOPEC || SANDPOINT || IOMEGA8241 - default y - - config MPC10X_STORE_GATHERING ---- linux-2.6.15.orig/arch/ppc/boot/Makefile 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/arch/ppc/boot/Makefile 2008-01-01 22:12:32.365126129 -0800 -@@ -13,7 +13,7 @@ - CFLAGS += -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include - HOSTCFLAGS += -Iarch/$(ARCH)/boot/include - --BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd -+BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd uImage - - bootdir-y := simple - bootdir-$(CONFIG_PPC_OF) += openfirmware ---- linux-2.6.15.orig/arch/ppc/boot/simple/Makefile 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/arch/ppc/boot/simple/Makefile 2008-01-01 22:12:32.365126129 -0800 -@@ -158,6 +158,10 @@ - end-$(CONFIG_SANDPOINT) := sandpoint - cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) - -+ end-$(CONFIG_IOMEGA8241) := iomega8241 -+ cacheflag-$(CONFIG_IOMEGA8241) := -include $(clear_L2_L3) -+ -+ - zimage-$(CONFIG_SPRUCE) := zImage-TREE - zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE - end-$(CONFIG_SPRUCE) := spruce ---- linux-2.6.15.orig/arch/ppc/platforms/Makefile 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/arch/ppc/platforms/Makefile 2008-01-01 22:12:32.365126129 -0800 -@@ -42,6 +42,7 @@ - obj-$(CONFIG_RADSTONE_PPC7D) += radstone_ppc7d.o - obj-$(CONFIG_SANDPOINT) += sandpoint.o - obj-$(CONFIG_SBC82xx) += sbc82xx.o -+obj-$(CONFIG_IOMEGA8241) += iomega8241.o - obj-$(CONFIG_SPRUCE) += spruce.o - obj-$(CONFIG_LITE5200) += lite5200.o - obj-$(CONFIG_EV64360) += ev64360.o ---- linux-2.6.15.orig/arch/ppc/platforms/iomega8241.h 1969-12-31 16:00:00.000000000 -0800 -+++ linux-2.6.15/arch/ppc/platforms/iomega8241.h 2008-01-01 22:12:32.365126129 -0800 -@@ -0,0 +1,66 @@ -+/* -+ * arch/ppc/platforms/iomega8241.h -+ * -+ * The Iomega StorCenter Network Hard Drive platform is based on the -+ * original sandpoint test platform. That GNU copyright information -+ * is reproduced below: -+ * -+ * Board setup routines for the Motorola SPS Sandpoint Test Platform. -+ * -+ * Author: Mark A. Greer -+ * mgreer@mvista.com -+ * -+ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under -+ * the terms of the GNU General Public License version 2. This program -+ * is licensed "as is" without any warranty of any kind, whether express -+ * or implied. -+ */ -+ -+#ifndef __PPC_PLATFORMS_IOMEGA8241_H -+#define __PPC_PLATFORMS_IOMEGA8241_H -+ -+#include <asm/ppcboot.h> -+#include <linux/config.h> -+ -+/* -+ * G2 Configuration: -+ * -+ * DEVICE IDSEL INTERRUPT NUMBER -+ * AN983B AD12 IRQ0 -+ * IDE Via DS6410 AD13 IRQ1 -+ * NEC USB uPD720101 AD14 IRQ2,3,4 -+ */ -+ -+#define IDE_INTRUPT 1 -+ -+/* -+ * The sandpoint boards have processor modules that either have an 8240 or -+ * an MPC107 host bridge on them. These bridges have an IDSEL line that allows -+ * them to respond to PCI transactions as if they were a normal PCI devices. -+ * However, the processor on the processor side of the bridge can not reach -+ * out onto the PCI bus and then select the bridge or bad things will happen -+ * (documented in the 8240 and 107 manuals). -+ * Because of this, we always skip the bridge PCI device when accessing the -+ * PCI bus. The PCI slot that the bridge occupies is defined by the macro -+ * below. -+ */ -+#define IOMEGA8241_HOST_BRIDGE_IDSEL 12 -+ -+void board_find_bridges(void); -+void iomega8241_fix_uart(void); -+/* -+ * Serial defines. -+ */ -+#define IOMEGA8241_SERIAL_0 0xFDF04500 -+#define IOMEGA8241_SERIAL_1 0xFDF04600 -+ -+#define RS_TABLE_SIZE 4 -+ -+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -+#define BASE_BAUD ( 100000000 / 16 ) /* 100Mhz speed, divided by 16 -+ to make the output freqency*/ -+#define UART_CLK 1843200 -+ -+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -+ -+#endif /* __PPC_PLATFORMS_IOMEGA8241_H */ ---- linux-2.6.15.orig/arch/ppc/syslib/Makefile 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/arch/ppc/syslib/Makefile 2008-01-01 22:12:32.365126129 -0800 -@@ -71,6 +71,7 @@ - obj-$(CONFIG_PRPMC800) += open_pic.o pci_auto.o - obj-$(CONFIG_RADSTONE_PPC7D) += pci_auto.o - obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o -+obj-$(CONFIG_IOMEGA8241) += pci_auto.o - obj-$(CONFIG_SBC82xx) += todc_time.o - obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \ - todc_time.o ---- linux-2.6.15.orig/arch/ppc/syslib/mpc10x_common.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/arch/ppc/syslib/mpc10x_common.c 2008-01-01 22:12:32.365126129 -0800 -@@ -35,6 +35,10 @@ - #include <asm/mpc10x.h> - #include <asm/ppc_sys.h> - -+#ifdef CONFIG_IOMEGA8241 -+#define NUM_8259_INTERRUPTS 0 -+#endif -+ - #ifdef CONFIG_MPC10X_OPENPIC - #ifdef CONFIG_EPIC_SERIAL_MODE - #define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5) ---- linux-2.6.15.orig/drivers/char/Kconfig 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/char/Kconfig 2008-01-01 22:12:32.369126358 -0800 -@@ -999,6 +999,25 @@ - The mmtimer device allows direct userspace access to the - Altix system timer. - -+config 8241EMI -+ tristate "EMI fixes for the 8241 processor" -+ depends on IOMEGA8241 -+ default y -+ help -+ By changing the ODCR value from 0xAB to 0x95, we are able to reduce -+ the EMI along the PCI and MEMORY buses. -+ -+ msb 7 1 Controls the drive strength of DRV_PCI (40ohm) -+ 6 0 reserved -+ 5-4 01 Controls the drive strength of SDRAM_CLK (40ohm) -+ 3-2 01 Controls the drive strength of PCI_CLK and -+ PCI_CLK_SYNC_OUT (40ohm) -+ 1-0 01 Controls the drive strength of SDRAM_CLK and -+ SDRAM_SYNC_OUT (40ohm) -+ -+ See table 4-19 on page 4-22 of the MPC8245 Integrated Processor -+ User's Manual for details on these registers. -+ - source "drivers/char/tpm/Kconfig" - - config TELCLOCK ---- linux-2.6.15.orig/drivers/char/Makefile 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/char/Makefile 2008-01-01 22:12:32.369126358 -0800 -@@ -48,6 +48,7 @@ - obj-$(CONFIG_VIOTAPE) += viotape.o - obj-$(CONFIG_HVCS) += hvcs.o - obj-$(CONFIG_SGI_MBCS) += mbcs.o -+obj-$(CONFIG_8241EMI) += emiregs.o - - obj-$(CONFIG_PRINTER) += lp.o - obj-$(CONFIG_TIPAR) += tipar.o ---- linux-2.6.15.orig/drivers/char/emiregs.c 1969-12-31 16:00:00.000000000 -0800 -+++ linux-2.6.15/drivers/char/emiregs.c 2008-01-01 22:12:32.369126358 -0800 -@@ -0,0 +1,68 @@ -+#include <linux/init.h> -+#include <linux/module.h> -+ -+MODULE_LICENSE ("GPL"); -+ -+/* -+ The following CONFIG_READ_BYTE and CONFIG_WRITE_BYTE -+ functions were taken from u-boot -+ -+ By changing the ODCR value from 0xAB to 0x95, we are able to reduce -+ the EMI along the PCI and MEMORY buses. -+ -+ msb 7 1 Controls the drive strength of DRV_PCI (40ohm) -+ 6 0 reserved -+ 5-4 01 Controls the drive strength of SDRAM_CLK (40ohm) -+ 3-2 01 Controls the drive strength of PCI_CLK and -+ PCI_CLK_SYNC_OUT (40ohm) -+ 1-0 01 Controls the drive strength of SDRAM_CLK and -+ SDRAM_SYNC_OUT (40ohm) -+ -+ See table 4-19 on page 4-22 of the MPC8245 Integrated Processor -+ User's Manual for details on these registers. -+*/ -+#define CONFIG_ADDR 0xfec00000 -+#define CONFIG_DATA 0xfee00000 -+ -+#define CONFIG_READ_BYTE( addr, reg ) \ -+ __asm__ ( \ -+ " stwbrx %1, 0, %2\n \ -+ sync\n \ -+ lbz %0, %4(%3)\n \ -+ sync " \ -+ : "=r" (reg) \ -+ : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ -+ "b" (CONFIG_DATA), "n" ((addr) & 3)); -+ -+#define CONFIG_WRITE_BYTE( addr, data ) \ -+ __asm__ __volatile__( \ -+ " stwbrx %1, 0, %0\n \ -+ sync\n \ -+ stb %3, %4(%2)\n \ -+ sync " \ -+ : /* no output */ \ -+ : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ -+ "b" (CONFIG_DATA), "r" (data), \ -+ "n" ((addr) & 3)); -+ -+ -+static int emiregs_init (void) -+ { -+ u_long val, val2; -+ CONFIG_READ_BYTE (0x80000073, val); -+ CONFIG_WRITE_BYTE (0x80000073, 0x95); -+ CONFIG_READ_BYTE (0x80000073, val2); -+ -+ printk (KERN_INFO "8241 ODCR: changed from 0x%02lx, to 0x%02lx\n", val, val2); -+ -+ return 0; -+ } -+ -+static void emiregs_exit (void) -+ { -+ printk (KERN_INFO "emiregs module exitting\n"); -+ return; -+ } -+ -+module_init (emiregs_init); -+module_exit (emiregs_exit); ---- linux-2.6.15.orig/drivers/char/rtc.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/char/rtc.c 2008-01-01 22:12:32.369126358 -0800 -@@ -514,9 +514,16 @@ - } - case RTC_RD_TIME: /* Read the time/date from RTC */ - { -+#ifdef CONFIG_IOMEGA8241 -+ unsigned long usi_time; -+ usi_time = ds1337_get_time(); -+ to_tm(usi_time,wtime); -+ break; -+#else - memset(&wtime, 0, sizeof(struct rtc_time)); - rtc_get_rtc_time(&wtime); - break; -+#endif /* CONFIG_IOMEGA8241 */ - } - case RTC_SET_TIME: /* Set the RTC */ - { -@@ -558,7 +565,7 @@ - - if ((yrs -= epoch) > 255) /* They are unsigned */ - return -EINVAL; -- -+#ifndef CONFIG_IOMEGA8241 - spin_lock_irq(&rtc_lock); - #ifdef CONFIG_MACH_DECSTATION - real_yrs = yrs; -@@ -614,6 +621,11 @@ - - spin_unlock_irq(&rtc_lock); - return 0; -+#else /* CONFIG_IOMEGA8241 */ -+ /* next is the forth API provided by ds1337.c USI-SS */ -+ ds1337_usi_set_time(yrs,mon,day,hrs,min,sec); -+ break; -+#endif /* CONFIG_IOMEGA8241 */ - } - #ifdef RTC_IRQ - case RTC_IRQP_READ: /* Read the periodic IRQ rate. */ ---- linux-2.6.15.orig/drivers/i2c/busses/i2c-mpc.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/i2c/busses/i2c-mpc.c 2008-01-01 22:12:32.369126358 -0800 -@@ -285,7 +285,11 @@ - .algo = &mpc_algo, - .class = I2C_CLASS_HWMON, - .timeout = 1, -+#ifdef CONFIG_IOMEGA8241 -+ .retries = 400 -+#else - .retries = 1 -+#endif /* CONFIG_IOMEGA8241 */ - }; - - static int fsl_i2c_probe(struct platform_device *pdev) ---- linux-2.6.15.orig/drivers/ide/pci/via82cxxx.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/ide/pci/via82cxxx.c 2008-01-02 08:21:42.876113109 -0800 -@@ -305,6 +305,12 @@ - */ - - pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); -+#ifdef CONFIG_IOMEGA8241 -+ if(via_config->id == PCI_DEVICE_ID_VIA_6410) { -+ pci_write_config_byte(dev, VIA_IDE_ENABLE, v | 0x3); -+ } -+#endif -+ - - /* - * Set up FIFO sizes and thresholds. -@@ -485,7 +492,11 @@ - .channels = 2, - .autodma = AUTODMA, - .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, -+#ifdef CONFIG_IOMEGA8241 -+ .bootable = NEVER_BOARD, -+#else - .bootable = ON_BOARD, -+#endif - } - }; - ---- linux-2.6.15.orig/drivers/mtd/maps/Kconfig 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/mtd/maps/Kconfig 2008-01-01 22:12:32.369126358 -0800 -@@ -639,5 +639,10 @@ - - This selection automatically selects the map_ram driver. - --endmenu -+config MTD_IOMEGA8241 -+ tristate "Map driver for the Iomega 8241 StorCenter board" -+ depends on IOMEGA8241 -+ help -+ Map driver for the Iomega StorCenter Network Hard Drive. - -+endmenu ---- linux-2.6.15.orig/drivers/mtd/maps/Makefile 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/mtd/maps/Makefile 2008-01-01 22:12:32.369126358 -0800 -@@ -68,6 +68,7 @@ - obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o - obj-$(CONFIG_MTD_DMV182) += dmv182.o - obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o -+obj-$(CONFIG_MTD_IOMEGA8241) += iomega8241_mtd.o - obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o ---- linux-2.6.15.orig/drivers/mtd/maps/iomega8241_mtd.c 1969-12-31 16:00:00.000000000 -0800 -+++ linux-2.6.15/drivers/mtd/maps/iomega8241_mtd.c 2008-01-01 22:12:32.369126358 -0800 -@@ -0,0 +1,102 @@ -+/* -+ * drivers/mtd/maps/iomega8241_mtd.c -+ * -+ * Iomega Corporation -+ * -+ * Flash mapping for the Iomega StorCenter Network Hard Drive -+ * -+ * This module is based on the mpc1211.c file created by -+ * Saito.K & Jeanne <ksaito@interface.co.jp> -+ * -+ */ -+ -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/kernel.h> -+#include <asm/io.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/map.h> -+#include <linux/config.h> -+#include <linux/mtd/partitions.h> -+ -+#include <asm/immap_cpm2.h> -+ -+static struct mtd_info *iomegamtd; -+static struct mtd_partition *parsed_parts; -+ -+struct map_info iomega8241_flash_map = { -+ .name = "Flash", -+ .phys = 0xFF800000, -+ .size = 0x800000, -+ .bankwidth = 1, -+}; -+ -+static struct mtd_partition iomega8241_partitions[] = { -+ { -+ .name = "kernel", -+ /* 1507328 bytes: kernel space */ -+ .size = 0x00170000, -+ .offset = 0, -+ }, { -+ .name = "filesystem", -+ /* 5832704 bytes: root partition */ -+ .size = 0x00590000, -+ /* start is FF970000 */ -+ .offset = MTDPART_OFS_APPEND, -+ }, { -+ .name = "bootloader", -+ /* 262144 bytes for u-boot */ -+ .size = 0x00040000, -+ /* start is FFF00000 */ -+ .offset = MTDPART_OFS_APPEND, -+ }, { -+ .name = "sysconfig", -+ /* 786432 bytes: sysconf partition */ -+ .size = 0x000C0000, -+ /* start is FFF40000 */ -+ .offset = MTDPART_OFS_APPEND, -+ } -+}; -+ -+static int __init -+init_iomega8241_flash(void) -+{ -+ int nr_parts; -+ -+ iomega8241_flash_map.virt = ioremap(iomega8241_flash_map.phys, iomega8241_flash_map.size); -+ -+ simple_map_init(&iomega8241_flash_map); -+ -+ printk("Iomega8241: Probing for flash...\n"); -+ iomegamtd = do_map_probe("cfi_probe", &iomega8241_flash_map); -+ if (!iomegamtd) { -+ printk(KERN_NOTICE "Flash chips not detected at either possible location.\n"); -+ return -ENXIO; -+ } -+ printk("Iomega8241: Flash found at location 0x%x\n", iomega8241_flash_map.phys); -+ iomegamtd->owner = THIS_MODULE; -+ -+ parsed_parts = iomega8241_partitions; -+ nr_parts = ARRAY_SIZE(iomega8241_partitions); -+ -+ add_mtd_partitions(iomegamtd, parsed_parts, nr_parts); -+ return 0; -+} -+ -+static void __exit -+cleanup_iomega8241_flash(void) -+{ -+ if (parsed_parts) -+ del_mtd_partitions(iomegamtd); -+ else -+ del_mtd_device(iomegamtd); -+ map_destroy(iomegamtd); -+} -+ -+module_init(init_iomega8241_flash); -+module_exit(cleanup_iomega8241_flash); -+ -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Anthony Russello <russello@iomega.com>"); -+MODULE_DESCRIPTION("Flash mapping for the Iomega StorCenter Network Hard Drive"); ---- linux-2.6.15.orig/drivers/net/wireless/prism54/islpci_dev.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/net/wireless/prism54/islpci_dev.c 2008-01-01 22:12:32.369126358 -0800 -@@ -874,6 +874,7 @@ - - /* select the firmware file depending on the device id */ - switch (pdev->device) { -+ case 0x3873: - case 0x3877: - strcpy(priv->firmware, ISL3877_IMAGE_FILE); - break; ---- linux-2.6.15.orig/drivers/net/wireless/prism54/islpci_hotplug.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/net/wireless/prism54/islpci_hotplug.c 2008-01-01 22:12:32.373126589 -0800 -@@ -70,6 +70,13 @@ - PCI_ANY_ID, PCI_ANY_ID, - 0, 0, 0 - }, -+ /* Intersil PRISM NetGate 2511 MP PLUS 100mW */ -+ { -+ 0x1260, 0x3873, -+ PCI_ANY_ID, PCI_ANY_ID, -+ 0, 0, 0 -+ }, -+ - - /* End of list */ - {0,0,0,0,0,0,0} ---- linux-2.6.15.orig/drivers/pci/probe.c 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/drivers/pci/probe.c 2008-01-01 22:12:32.373126589 -0800 -@@ -596,6 +596,20 @@ - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); - class >>= 8; /* upper 3 bytes */ - dev->class = class; -+#ifdef CONFIG_IOMEGA8241 -+ /* -+ * The VIA VT6410 used on the Iomega StorCenter Network Hard Drive reports -+ * with a class of 0x01040 (PCI_CLASS_STORAGE_RAID). -+ * -+ * The following correction allows it to be used as a standard PCI IDE -+ * controller (0x0101) -+ */ -+ if((dev->vendor==PCI_VENDOR_ID_VIA)&&(dev->device==PCI_DEVICE_ID_VIA_6410)) { -+ dev->class=0x01018f; -+ printk("PCI: Adjustments for the VIA VT6410 controller have been made\n"); -+ } -+#endif /* CONFIG_IOMEGA8241 */ -+ - class >>= 8; - - pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev), ---- linux-2.6.15.orig/include/asm-ppc/mpc10x.h 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/include/asm-ppc/mpc10x.h 2008-01-01 22:12:32.373126589 -0800 -@@ -76,7 +76,11 @@ - - #define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 - #define MPC10X_MAPB_PCI_IO_START 0x00000000 -+#ifdef CONFIG_IOMEGA8241 -+#define MPC10X_MAPB_PCI_IO_END 0xFFFF -+#else - #define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) -+#endif /* CONFIG_IOMEGA8241 */ - #define MPC10X_MAPB_PCI_MEM_START 0x80000000 - #define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) - -@@ -157,7 +161,12 @@ - */ - extern unsigned long ioremap_base; - #define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) -+ -+#ifdef CONFIG_IOMEGA8241 -+#define MPC10X_MAPB_EUMB_BASE 0xFDF00000 -+#else - #define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE -+#endif - - enum ppc_sys_devices { - MPC10X_IIC1, ---- linux-2.6.15.orig/include/asm-ppc/serial.h 2006-01-02 19:21:10.000000000 -0800 -+++ linux-2.6.15/include/asm-ppc/serial.h 2008-01-01 22:12:32.373126589 -0800 -@@ -38,6 +38,8 @@ - #include <asm/mpc85xx.h> - #elif defined(CONFIG_RADSTONE_PPC7D) - #include <platforms/radstone_ppc7d.h> -+#elif defined(CONFIG_IOMEGA8241) -+#include <platforms/iomega8241.h> - #else - - /* diff --git a/packages/linux/linux-storcenter_2.6.12.6.bb b/packages/linux/linux-storcenter_2.6.12.6.bb deleted file mode 100644 index b0e8c4d61c..0000000000 --- a/packages/linux/linux-storcenter_2.6.12.6.bb +++ /dev/null @@ -1,50 +0,0 @@ -DESCRIPTION = "Linux Kernel for the Iomega storcenter platform" -SECTION = "kernel" -LICENSE = "GPL" -DEPENDS = "uboot-utils" -PR = "r0" - -# notes on iom def kernel: -# -# can probably remove : -# BLK_DEV_RAM ? -# MD_RAID5 -# QUOTA -# QFMT_V2 -# DNOTIFY? -# MSDOS_FS, VFAT_FS, NTFS_FS? -# -# USB_GADGET? - USB_GADGET_NET2280, USB_ETH, USB_ETH_RNDIS -# -# -# should add: -# EXT3_FS -# PACKET_MMAP ? -# i2c_chardev? -# usb audio: -# USB_EMI62? -# USB_EMI26? - -COMPATIBLE_MACHINE = "storcenter" - -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ - file://kernel.patch-${PV};patch=1 \ - file://10-command-line.patch;patch=1 \ - file://defconfig-${PV} " - -S = "${WORKDIR}/linux-${PV}" - -inherit kernel - -KERNEL_IMAGETYPE = "uImage" -KERNEL_OUTPUT = "arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE}" - -do_configure() { - install -m 644 ${WORKDIR}/defconfig-${PV} ${S}/.config - make ARCH=ppc oldconfig -} - -#ppc build leaves the kernel in a different place -#do_movekernel() { -# -#} diff --git a/packages/linux/linux-storcenter_2.6.15.7.bb b/packages/linux/linux-storcenter_2.6.15.7.bb deleted file mode 100644 index 74dfd8fb3a..0000000000 --- a/packages/linux/linux-storcenter_2.6.15.7.bb +++ /dev/null @@ -1,25 +0,0 @@ -DESCRIPTION = "Linux Kernel for the Iomega storcenter platform" -SECTION = "kernel" -LICENSE = "GPL" -DEPENDS = "u-boot-utils-native" -PR = "r1" - -COMPATIBLE_MACHINE = "storcenter" - -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ - file://kernel.patch-${PV};patch=1 \ - file://defconfig-${PV} " - -S = "${WORKDIR}/linux-${PV}" - -inherit kernel - -export ARCH = "ppc" - -KERNEL_IMAGETYPE = "uImage" -KERNEL_OUTPUT = "arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE}" - -do_configure() { - install -m 644 ${WORKDIR}/defconfig-${PV} ${S}/.config - make ARCH=${ARCH} oldconfig -} diff --git a/packages/linux/linux-storcenter_2.6.27.7.bb b/packages/linux/linux-storcenter_2.6.27.7.bb new file mode 100644 index 0000000000..b403cda2ab --- /dev/null +++ b/packages/linux/linux-storcenter_2.6.27.7.bb @@ -0,0 +1,57 @@ +DESCRIPTION = "Linux Kernel for the IOMega StorCenter" +SECTION = "kernel" +LICENSE = "GPL" +PR = "r2" + +DEPENDS = "dtc-native" +COMPATIBLE_MACHINE = "storcenter" + +SRC_URI = "http://kernel.org/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ + file://fw-and-powerpc-install.patch;patch=1 \ + file://defconfig-${PV} \ + " + +S = "${WORKDIR}/linux-${PV}" + +inherit kernel + +export ARCH="powerpc" + +KERNEL_IMAGETYPE = "uImage" + +FILES_kernel-image += "/boot/storcenter.dtb" + +do_configure() { + mkdir -p ${IMAGE_ROOTFS} + install -m 0644 ${WORKDIR}/defconfig-${PV} ${S}/.config + ARCH=${ARCH} oe_runmake oldconfig +} + +do_install_append() { + rm -f ${D}/boot/vmlinux-* + dtc -f -I dts -O dtb -o ${D}/boot/storcenter.dtb -V 16 ${S}/arch/${ARCH}/boot/dts/storcenter.dts +} + +do_builtin_initramfs_foonas() { + : +} + +pkg_preinst_foonas() { + if [ "x$D" != "x" ]; then + ln -sf ${KERNEL_IMAGETYPE}-${PV} ${D}/boot/uImage + exit 1 + fi + + rm -f /boot/uImage + ln -sf ${KERNEL_IMAGETYPE}-${PV} /boot/uImage +} + +do_deploy() { + install -d ${DEPLOY_DIR_IMAGE} + install -m 0644 ${S}/arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/vmlinux.UBoot + install -m 0644 ${D}/boot/storcenter.dtb ${DEPLOY_DIR_IMAGE}/storcenter.dtb +} + +do_deploy[dirs] = "${S}" + +addtask deploy before do_package after do_install |