diff options
-rw-r--r-- | packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff | 69 | ||||
-rw-r--r-- | packages/linux/linux-omap/musb-fix-dbrownell.patch | 71 | ||||
-rw-r--r-- | packages/linux/linux-omap/musb-mru-otgfix.diff | 43 | ||||
-rw-r--r-- | packages/linux/linux-omap_git.bb | 4 |
4 files changed, 2 insertions, 185 deletions
diff --git a/packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff b/packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff deleted file mode 100644 index c93a5b06c8..0000000000 --- a/packages/linux/linux-omap/musb-fix-ISO-in-unlink.diff +++ /dev/null @@ -1,69 +0,0 @@ -From: Ajay Kumar Gupta <ajay.gupta@ti.com> -To: linux-omap@vger.kernel.org -Cc: linux-usb@vger.kernel.org, felipe.balbi@nokia.com, - stern@rowland.harvard.edu, Ajay Kumar Gupta <ajay.gupta@ti.com> -Subject: [PATCH v3] OMAP:MUSB: Corrects urb unlink function path -Date: Mon, 25 Aug 2008 10:52:16 +0530 - -Fixes kernel panic while ISO IN transfer is aborted.Replaced -usb_hcd_unlink_urb_from_ep() from musb_giveback() to __musb_giveback() -to make sure urb is unlinked before giveback when __musb_giveback() is -called from musb_urb_dequeue(). - -Acquired musb->lock() before usb_hcd_unlink_urb_from_ep() within in -enqueue path. - -Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> ---- - drivers/usb/musb/musb_host.c | 7 +++++-- - 1 files changed, 5 insertions(+), 2 deletions(-) - -diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c -index 08e421f..4279311 100644 ---- a/drivers/usb/musb/musb_host.c -+++ b/drivers/usb/musb/musb_host.c -@@ -291,6 +291,7 @@ __acquires(musb->lock) - urb->actual_length, urb->transfer_buffer_length - ); - -+ usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb); - spin_unlock(&musb->lock); - usb_hcd_giveback_urb(musb_to_hcd(musb), urb, status); - spin_lock(&musb->lock); -@@ -353,8 +354,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) - break; - } - -- usb_hcd_unlink_urb_from_ep(musb_to_hcd(musb), urb); -- - qh->is_ready = 0; - __musb_giveback(musb, urb, status); - qh->is_ready = ready; -@@ -1787,7 +1786,9 @@ static int musb_urb_enqueue( - */ - qh = kzalloc(sizeof *qh, mem_flags); - if (!qh) { -+ spin_lock_irqsave(&musb->lock, flags); - usb_hcd_unlink_urb_from_ep(hcd, urb); -+ spin_unlock_irqrestore(&musb->lock, flags); - return -ENOMEM; - } - -@@ -1899,7 +1900,9 @@ static int musb_urb_enqueue( - - done: - if (ret != 0) { -+ spin_lock_irqsave(&musb->lock, flags); - usb_hcd_unlink_urb_from_ep(hcd, urb); -+ spin_unlock_irqrestore(&musb->lock, flags); - kfree(qh); - } - return ret; --- -1.5.6 - --- -To unsubscribe from this list: send the line "unsubscribe linux-omap" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html - diff --git a/packages/linux/linux-omap/musb-fix-dbrownell.patch b/packages/linux/linux-omap/musb-fix-dbrownell.patch deleted file mode 100644 index 3526cd3ca6..0000000000 --- a/packages/linux/linux-omap/musb-fix-dbrownell.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: David Brownell <dbrownell@users.sourceforge.net> - -Minor cleanups to omap 2430/34xx/35x musb_hdrc init: - - - num_eps is 16; here, each one is bidirectional - - use DMA_32BIT_MASK to prevent confusion/errors - - initialize root port power to reflect 100 mA limit - -This still hard-wires some board-specific data, since there -are no hooks through which different boards can provide the -right data to the init code. - -Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> - ---- a/arch/arm/mach-omap2/usb-musb.c -+++ b/arch/arm/mach-omap2/usb-musb.c -@@ -21,12 +21,15 @@ - #include <linux/delay.h> - #include <linux/platform_device.h> - #include <linux/clk.h> -+#include <linux/dma-mapping.h> -+ - #include <asm/io.h> --#include <mach/mux.h> -+ - #include <linux/usb/musb.h> - - #include <mach/hardware.h> - #include <mach/pm.h> -+#include <mach/mux.h> - #include <mach/usb.h> - - #ifdef CONFIG_USB_MUSB_SOC -@@ -109,7 +112,7 @@ static struct musb_hdrc_config musb_config = { - .dyn_fifo = 1, - .soft_con = 1, - .dma = 1, -- .num_eps = 32, -+ .num_eps = 16, - .dma_channels = 7, - .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3), - .ram_bits = 12, -@@ -129,16 +132,22 @@ static struct musb_hdrc_platform_data musb_plat = { - : "usbhs_ick", - .set_clock = musb_set_clock, - .config = &musb_config, -+ -+ /* REVISIT charge pump on TWL4030 can supply up to -+ * 100 mA ... but this value is board-specific, like -+ * "mode", and should be passed to usb_musb_init(). -+ */ -+ .power = 50, /* up to 100 mA */ - }; - --static u64 musb_dmamask = ~(u32)0; -+static u64 musb_dmamask = DMA_32BIT_MASK; - - static struct platform_device musb_device = { - .name = "musb_hdrc", - .id = -1, - .dev = { - .dma_mask = &musb_dmamask, -- .coherent_dma_mask = 0xffffffff, -+ .coherent_dma_mask = DMA_32BIT_MASK, - .platform_data = &musb_plat, - }, - .num_resources = ARRAY_SIZE(musb_resources), --- -To unsubscribe from this list: send the line "unsubscribe linux-omap" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/packages/linux/linux-omap/musb-mru-otgfix.diff b/packages/linux/linux-omap/musb-mru-otgfix.diff deleted file mode 100644 index 767858b8b1..0000000000 --- a/packages/linux/linux-omap/musb-mru-otgfix.diff +++ /dev/null @@ -1,43 +0,0 @@ -From: Mans Rullgard <mans@mansr.com> -Date: Sat, 6 Sep 2008 15:11:00 +0000 (+0100) -Subject: usb: musb: fix something -X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=1e5bc41773bb981b3a89bd762becf98c72be5e4c - -usb: musb: fix something - -This makes USB work on the Beagleboard. I don't know why. ---- - -diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c -index e07cad8..4d6ff26 100644 ---- a/drivers/usb/musb/musb_core.c -+++ b/drivers/usb/musb/musb_core.c -@@ -1819,6 +1819,9 @@ allocate_instance(struct device *dev, void __iomem *mbase) - ep->epnum = epnum; - } - -+#ifdef CONFIG_USB_MUSB_OTG -+ otg_set_transceiver(&musb->xceiv); -+#endif - musb->controller = dev; - return musb; - } -diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c -index 9d2dcb1..51af80b 100644 ---- a/drivers/usb/musb/omap2430.c -+++ b/drivers/usb/musb/omap2430.c -@@ -215,12 +215,14 @@ void musb_platform_set_mode(struct musb *musb, u8 musb_mode) - - int __init musb_platform_init(struct musb *musb) - { -+ struct otg_transceiver *xceiv = otg_get_transceiver(); - u32 l; - - #if defined(CONFIG_ARCH_OMAP2430) - omap_cfg_reg(AE5_2430_USB0HS_STP); - #endif - -+ musb->xceiv = *xceiv; - musb_platform_resume(musb); - - l = omap_readl(OTG_SYSCONFIG); diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb index 76bf666449..bea6f8ecae 100644 --- a/packages/linux/linux-omap_git.bb +++ b/packages/linux/linux-omap_git.bb @@ -6,11 +6,11 @@ KERNEL_IMAGETYPE = "uImage" COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|omap3evm" -SRCREV = "3b7de4be879f1f4f55ae59882a5cbd80f6dcf0f0" +SRCREV = "5019ed843f3208482c64043e4052e89b3d5462a0" PV = "2.6.27+2.6.28-rc6+${PR}+gitr${SRCREV}" #PV = "2.6.27+${PR}+gitr${SRCREV}" -PR = "r1" +PR = "r2" SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \ file://defconfig" |