diff options
| -rw-r--r-- | conf/machine/storcenter.conf | 26 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/defconfig-2.6.15.7 | 1176 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter/kernel.patch-2.6.15.7 | 1181 | ||||
| -rw-r--r-- | packages/linux/linux-storcenter_2.6.15.7.bb | 36 |
4 files changed, 2408 insertions, 11 deletions
diff --git a/conf/machine/storcenter.conf b/conf/machine/storcenter.conf index 519c565061..5b69bbdc9a 100644 --- a/conf/machine/storcenter.conf +++ b/conf/machine/storcenter.conf @@ -1,23 +1,27 @@ TARGET_ARCH = "powerpc" -TARGET_OS = "linux" TARGET_FPU = "hard" -PACKAGE_EXTRA_ARCHS = "ppc ppc603e" - -INHERIT += "storcenter-image" +PACKAGE_EXTRA_ARCHS = "ppc603e" # terminal specs - console, but no other ports -SERIAL_CONSOLE="115200 console" +SERIAL_CONSOLE="115200 ttyS0" USE_VT="0" -MODUTILS=26 -MACHINE_FEATURES= "kernel26 usbhost pci ext2 uboot" +# uboot switches +UBOOT_MACHINE="Sandpoint8240_config" + +# plug in other tasks - not "really" used unless we are using task-boot +MACHINE_FEATURES= "kernel26 usbhost pci ext2" PREFERRED_PROVIDER_virtual/kernel = "linux-storcenter" +PREFERRED_VERSION_udev = "115" -# We want udev support in the image -udevdir = "/dev" +# the StorCenter Control Daemon provides cmdline fan and light control +MACHINE_EXTRA_RDEPENDS = "sccd" -EXTRA_IMAGECMD = "--big-endian" -ERASEBLOCK_SIZE = "0x10000" IMAGE_FSTYPES = "jffs2" +KERNEL_IMAGETYPE ?= uImage +EXTRA_IMAGECMD_jffs2 += "--pad --big-endian --eraseblock=0x10000" +# must be in HEX +FLASH_KERNEL_SIZE=0x170000 +FLASH_ROOT_SIZE=0x590000 require conf/machine/include/tune-ppc603e.inc diff --git a/packages/linux/linux-storcenter/defconfig-2.6.15.7 b/packages/linux/linux-storcenter/defconfig-2.6.15.7 new file mode 100644 index 0000000000..de5e5b80f7 --- /dev/null +++ b/packages/linux/linux-storcenter/defconfig-2.6.15.7 @@ -0,0 +1,1176 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15.7 +# Tue Jan 15 08:24:59 2008 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_LBD=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# Processor +# +CONFIG_6xx=y +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +# CONFIG_TAU is not set +# CONFIG_KEXEC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_PPC_GEN550=y +CONFIG_PPC_STD_MMU=y + +# +# Platform options +# +# CONFIG_PPC_MULTIPLATFORM is not set +# CONFIG_APUS is not set +# CONFIG_KATANA is not set +# CONFIG_WILLOW is not set +# CONFIG_CPCI690 is not set +# CONFIG_POWERPMC250 is not set +# CONFIG_CHESTNUT is not set +# CONFIG_SPRUCE is not set +# CONFIG_HDPU is not set +# CONFIG_EV64260 is not set +# CONFIG_LOPEC is not set +# CONFIG_MVME5100 is not set +# CONFIG_PPLUS is not set +# CONFIG_PRPMC750 is not set +# CONFIG_PRPMC800 is not set +# CONFIG_SANDPOINT is not set +# CONFIG_RADSTONE_PPC7D is not set +# CONFIG_PAL4 is not set +# CONFIG_GEMINI is not set +# CONFIG_EST8260 is not set +# CONFIG_SBC82xx is not set +CONFIG_IOMEGA8241=y +# CONFIG_SBS8260 is not set +# CONFIG_RPX8260 is not set +# CONFIG_TQM8260 is not set +# CONFIG_ADS8272 is not set +# CONFIG_PQ2FADS is not set +# CONFIG_LITE5200 is not set +# CONFIG_MPC834x_SYS is not set +# CONFIG_EV64360 is not set +CONFIG_MPC10X_BRIDGE=y +CONFIG_MPC10X_OPENPIC=y +# CONFIG_MPC10X_STORE_GATHERING is not set +# CONFIG_SMP is not set +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,115200" +# CONFIG_PM is not set +# CONFIG_SOFTWARE_SUSPEND is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_FTL=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_AMDSTD_RETRY=0 +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xFF800000 +CONFIG_MTD_PHYSMAP_LEN=0x00800000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PLATRAM is not set +CONFIG_MTD_IOMEGA8241=y + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_BLK_DEV_OFFBOARD=y +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID5=y +# CONFIG_MD_RAID6 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +# CONFIG_SERIAL_8250_SHARE_IRQ is not set +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set +CONFIG_8241EMI=y + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_SENSORS_DS1337=y +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SERIAL_TEXT_DEBUG=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/packages/linux/linux-storcenter/kernel.patch-2.6.15.7 b/packages/linux/linux-storcenter/kernel.patch-2.6.15.7 new file mode 100644 index 0000000000..030ef64d2a --- /dev/null +++ b/packages/linux/linux-storcenter/kernel.patch-2.6.15.7 @@ -0,0 +1,1181 @@ +--- linux-2.6.15.orig/arch/ppc/platforms/iomega8241.c 1969-12-31 16:00:00.000000000 -0800 ++++ linux-2.6.15/arch/ppc/platforms/iomega8241.c 2008-01-07 16:56:45.628534603 -0800 +@@ -0,0 +1,603 @@ ++/* ++ * arch/ppc/platforms/iomega8241.c ++ * ++ * The Iomega StorCenter Network Hard Drive platform is based on the ++ * original sandpoint test platform. That GNU copyright information ++ * is reproduced below: ++ * ++ * Board setup routines for the Motorola SPS Sandpoint Test Platform. ++ * ++ * Author: Mark A. Greer ++ * mgreer@mvista.com ++ * ++ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ */ ++ ++/* ++ * Iomega StorCenter Network Hard Drive. ++ * ++ * Maintainer (Iomega Port): Anthony Russello ++ * russello@iomega.com ++ * Much of the below code was taken from the original sandpoint.c/.h port ++ * done my Mark A. Greer (see above copyright information). It was adapted ++ * to support a custom board. ++ */ ++ ++#include <linux/config.h> ++#include <linux/stddef.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/errno.h> ++#include <linux/reboot.h> ++#include <linux/pci.h> ++#include <linux/kdev_t.h> ++#include <linux/major.h> ++#include <linux/initrd.h> ++#include <linux/console.h> ++#include <linux/delay.h> ++#include <linux/irq.h> ++#include <linux/ide.h> ++#include <linux/seq_file.h> ++#include <linux/root_dev.h> ++#include <linux/serial.h> ++#include <linux/tty.h> /* for linux/serial_core.h */ ++#include <linux/serial_8250.h> ++ ++#include <asm/system.h> ++#include <asm/pgtable.h> ++#include <asm/page.h> ++#include <asm/time.h> ++#include <asm/dma.h> ++#include <asm/io.h> ++#include <asm/machdep.h> ++#include <asm/prom.h> ++#include <asm/smp.h> ++#include <asm/vga.h> ++#include <asm/open_pic.h> ++#include <asm/todc.h> ++#include <asm/bootinfo.h> ++#include <asm/mpc10x.h> ++#include <asm/pci-bridge.h> ++#include <asm/kgdb.h> ++ ++#include "iomega8241.h" ++ ++/* Real Time Clock */ ++extern spinlock_t rtc_lock; ++extern int ds1337_do_command(int id, int cmd, void *arg); ++#define DS1337_GET_DATE 0 ++#define DS1337_SET_DATE 1 ++ ++unsigned char __res[sizeof(bd_t)]; ++ ++static void iomega8241_halt(void); ++ ++/* ++ * Define all of the IRQ senses and polarities. ++ */ ++static u_char iomega8241_openpic_initsenses[] __initdata = { ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 0: AN983B */ ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 1: IDE VIA DS6410 */ ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 2: USB */ ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 3: USB */ ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 4: USB */ ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 5: UART0 */ ++ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* 6: UART1 */ ++}; ++ ++/* ++ * Define all of the PCI IRQ Mappings ++ */ ++static inline int ++iomega8241_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) ++{ ++ static char pci_irq_table[][4] = ++ /* ++ * PCI IDSEL/INTPIN->INTLINE ++ * A B C D ++ */ ++ { ++ { 1, 1, 0, 0 }, ++ { 2, 3, 4, 1 }, ++ { 0, 0, 4, 4 }, ++ { 3, 3, 4, 4 }, ++ { 3, 3, 4, 4 }, ++ }; ++ ++ const long min_idsel = 13, max_idsel = 17, irqs_per_slot = 4; ++ return PCI_IRQ_TABLE_LOOKUP; ++} ++ ++static int ++iomega8241_exclude_device(u_char bus, u_char devfn) ++{ ++ if ((bus == 0) && (PCI_SLOT(devfn) == IOMEGA8241_HOST_BRIDGE_IDSEL)) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ else ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static void __init ++iomega8241_find_bridges(void) ++{ ++ struct pci_controller *hose; ++ ++ hose = pcibios_alloc_controller(); ++ ++ if (!hose) ++ return; ++ ++ hose->first_busno = 0; ++ hose->last_busno = 0x1; ++ ++ if (mpc10x_bridge_init(hose, ++ MPC10X_MEM_MAP_B, ++ MPC10X_MEM_MAP_B, ++ MPC10X_MAPB_EUMB_BASE) == 0) { ++ ++ ppc_md.pci_exclude_device = iomega8241_exclude_device; ++ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); ++ ppc_md.pcibios_fixup = NULL; ++ ppc_md.pcibios_fixup_bus = NULL; ++ ppc_md.pci_swizzle = common_swizzle; ++ ppc_md.pci_map_irq = iomega8241_map_irq; ++ } ++ else { ++ if (ppc_md.progress) ++ ppc_md.progress("Bridge init failed", 0x100); ++ printk("Host bridge init failed\n"); ++ } ++ return; ++} ++ ++ ++static ulong ++get_bus_frequency(void) ++{ ++ bd_t *bp = (bd_t *)__res; ++ ulong freq; ++ if (133333332 == bp->bi_busfreq) ++ freq = 132000000; ++ if (99999999 == bp->bi_busfreq) ++ freq = 100000000; ++ return(freq); ++} ++ ++ ++static void ++iomega8241_early_serial_map(void) ++{ ++#if defined(CONFIG_SERIAL_8250) ++ struct plat_serial8250_port *pdata; ++ bd_t *binfo = (bd_t *) __res; ++ ++ pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0); ++ pdata[0].uartclk = get_bus_frequency(); ++ pdata[0].membase = (unsigned char __iomem *) IOMEGA8241_SERIAL_0; ++ ++ pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1); ++ pdata[0].uartclk = get_bus_frequency(); ++ pdata[0].membase = (unsigned char __iomem *) IOMEGA8241_SERIAL_1; ++#endif ++} ++ ++static void __init ++iomega8241_setup_arch(void) ++{ ++ int i = 0; ++ ++ loops_per_jiffy = 100000000 / HZ; ++ ++#ifdef CONFIG_BLK_DEV_INITRD ++ if (initrd_start) ++ ROOT_DEV = Root_RAM0; ++ else ++#endif ++#ifdef CONFIG_ROOT_NFS ++ ROOT_DEV = Root_NFS; ++#else ++ ROOT_DEV = Root_HDA1; ++#endif ++ ++ /* Lookup PCI host bridges */ ++ iomega8241_find_bridges(); ++ ++ iomega8241_early_serial_map(); ++ ++ printk(KERN_INFO "Iomega StorCenter Network Hard Drive\n"); ++ printk(KERN_INFO "Linux Kernel by Protium Computing\n"); ++ ++ /* DINK32 12.3 and below do not correctly enable any caches. ++ * We will do this now with good known values. Future versions ++ * of DINK32 are supposed to get this correct. ++ */ ++ if (cpu_has_feature(CPU_FTR_SPEC7450)) ++ /* 745x is different. We only want to pass along enable. */ ++ _set_L2CR(L2CR_L2E); ++ else if (cpu_has_feature(CPU_FTR_L2CR)) ++ /* All modules have 1MB of L2. We also assume that an ++ * L2 divisor of 3 will work. ++ */ ++ _set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3 ++ | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF); ++#if 0 ++ /* Untested right now. */ ++ if (cpu_has_feature(CPU_FTR_L3CR)) { ++ /* Magic value. */ ++ _set_L3CR(0x8f032000); ++ } ++#endif ++} ++ ++#define IOMEGA8241_87308_CFG_ADDR 0x15c ++#define IOMEGA8241_87308_CFG_DATA 0x15d ++ ++#define IOMEGA8241_87308_CFG_INB(addr, byte) { \ ++ outb((addr), IOMEGA8241_87308_CFG_ADDR); \ ++ (byte) = inb(IOMEGA8241_87308_CFG_DATA); \ ++} ++ ++#define IOMEGA8241_87308_CFG_OUTB(addr, byte) { \ ++ outb((addr), IOMEGA8241_87308_CFG_ADDR); \ ++ outb((byte), IOMEGA8241_87308_CFG_DATA); \ ++} ++ ++#define IOMEGA8241_87308_SELECT_DEV(dev_num) { \ ++ IOMEGA8241_87308_CFG_OUTB(0x07, (dev_num)); \ ++} ++ ++#define IOMEGA8241_87308_DEV_ENABLE(dev_num) { \ ++ IOMEGA8241_87308_SELECT_DEV(dev_num); \ ++ IOMEGA8241_87308_CFG_OUTB(0x30, 0x01); \ ++} ++ ++static int __init ++iomega8241_request_io(void) ++{ ++ request_region(0x00,0x20,"dma1"); ++ request_region(0x20,0x20,"pic1"); ++ request_region(0x40,0x20,"timer"); ++ request_region(0x80,0x10,"dma page reg"); ++ request_region(0xa0,0x20,"pic2"); ++ request_region(0xc0,0x20,"dma2"); ++ ++ return 0; ++} ++ ++arch_initcall(iomega8241_request_io); ++ ++/* ++ * Interrupt setup and service. Interrrupts on the Sandpoint come ++ * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO). ++ * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4, ++ * IDE is on EPIC 7 and 8. ++ */ ++static void __init ++iomega8241_init_IRQ(void) ++{ ++ OpenPIC_InitSenses = iomega8241_openpic_initsenses; ++ OpenPIC_NumInitSenses = sizeof(iomega8241_openpic_initsenses); ++ ++ /* ++ * We need to tell openpic_set_sources where things actually are. ++ * mpc10x_common will set up OpenPIC_Addr at ioremap(EUMB phys base + ++ * EPIC offset (0x40000)); The EPIC IRQ register address map - ++ * Interrupt Source Configuration Registers gives these numbers as ++ * offsets starting at 0x50200, we need to adjust accordingly ++ */ ++ mpc10x_set_openpic(); ++} ++ ++static int ++iomega8241_get_irq(struct pt_regs *regs) ++{ ++ int irq; ++ ++ irq = openpic_irq(); ++ if (irq == OPENPIC_VEC_SPURIOUS) ++ irq = -1; ++ ++ return irq; ++} ++ ++static u32 ++iomega8241_irq_canonicalize(u32 irq) ++{ ++ return irq; ++} ++ ++static unsigned long __init ++iomega8241_find_end_of_memory(void) ++{ ++ bd_t *bp = (bd_t *)__res; ++ ++ if (bp->bi_memsize) ++ return bp->bi_memsize; ++ ++ return 64*1024*1024; ++} ++ ++static void __init ++iomega8241_map_io(void) ++{ ++ /* changes suggested by Freescale: */ ++ io_block_mapping(0xfc000000, 0xfc000000, 0x04000000, _PAGE_IO); ++} ++ ++static void ++iomega8241_restart(char *cmd) ++{ ++ local_irq_disable(); ++ ++ /* Set exception prefix high - to the firmware */ ++ _nmask_and_or_msr(0, MSR_IP); ++ ++ for(;;); /* Spin until reset happens */ ++} ++ ++static void ++iomega8241_power_off(void) ++{ ++ local_irq_disable(); ++ for(;;); /* No way to shut power off with software */ ++ /* NOTREACHED */ ++} ++ ++static void ++iomega8241_halt(void) ++{ ++ iomega8241_power_off(); ++ /* NOTREACHED */ ++} ++ ++static int ++iomega8241_show_cpuinfo(struct seq_file *m) ++{ ++ seq_printf(m, "vendor\t\t: Iomega Corporation\n"); ++ seq_printf(m, "machine\t\t: Iomega StorCenter Network Hard Drive\n"); ++ ++ return 0; ++} ++ ++#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ++/* ++ * IDE support. ++ */ ++static int iomega8241_ide_ports_known = 0; ++static unsigned long iomega8241_ide_regbase[MAX_HWIFS]; ++static unsigned long iomega8241_ide_ctl_regbase[MAX_HWIFS]; ++static unsigned long iomega8241_idedma_regbase; ++ ++static void ++iomega8241_ide_probe(void) ++{ ++ struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_VIA, ++ PCI_DEVICE_ID_VIA_6410, NULL); ++ ++ if (pdev) { ++ iomega8241_ide_regbase[0]=pdev->resource[0].start; ++ iomega8241_ide_regbase[1]=pdev->resource[2].start; ++ iomega8241_ide_ctl_regbase[0]=pdev->resource[1].start; ++ iomega8241_ide_ctl_regbase[1]=pdev->resource[3].start; ++ iomega8241_idedma_regbase=pdev->resource[4].start; ++ ++ printk("Found: VIA VT6410 based IDE\n"); ++ } ++ ++ iomega8241_ide_ports_known = 1; ++} ++ ++static int ++iomega8241_ide_default_irq(unsigned long base) ++{ ++ if (iomega8241_ide_ports_known == 0) ++ iomega8241_ide_probe(); ++ ++ if (base == iomega8241_ide_regbase[0]) ++ return IDE_INTRUPT; ++ else if (base == iomega8241_ide_regbase[1]) ++ return IDE_INTRUPT; ++ else ++ return 0; ++} ++ ++static unsigned long ++iomega8241_ide_default_io_base(int index) ++{ ++ if (iomega8241_ide_ports_known == 0) ++ iomega8241_ide_probe(); ++ ++ return iomega8241_ide_regbase[index]; ++} ++ ++static void __init ++iomega8241_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, ++ unsigned long ctrl_port, int *irq) ++{ ++ unsigned long reg = data_port; ++ uint alt_status_base; ++ int i; ++ ++ for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { ++ hw->io_ports[i] = reg++; ++ } ++ ++ if (data_port == iomega8241_ide_regbase[0]) { ++ alt_status_base = iomega8241_ide_ctl_regbase[0] + 2; ++ hw->irq = IDE_INTRUPT; ++ } else if (data_port == iomega8241_ide_regbase[1]) { ++ alt_status_base = iomega8241_ide_ctl_regbase[1] + 2; ++ hw->irq = IDE_INTRUPT; ++ } else { ++ alt_status_base = 0; ++ hw->irq = 0; ++ } ++ ++ if (ctrl_port) { ++ hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; ++ } else { ++ hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base; ++ } ++ ++ if (irq != NULL) { ++ *irq = hw->irq; ++ } ++} ++#endif ++ ++/* ++ * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1. ++ */ ++static __inline__ void ++iomega8241_set_bat(void) ++{ ++ unsigned long bat3u, bat3l; ++ ++ __asm__ __volatile__( ++ " lis %0,0xf800\n \ ++ ori %1,%0,0x002a\n \ ++ ori %0,%0,0x0ffe\n \ ++ mtspr 0x21e,%0\n \ ++ mtspr 0x21f,%1\n \ ++ isync\n \ ++ sync " ++ : "=r" (bat3u), "=r" (bat3l)); ++} ++ ++TODC_ALLOC(); ++ ++/* Real Time Clock support. ++ * StorCenter has a DS1337 accessed by I2C. ++ */ ++static void __init ++iomega8241_calibrate_decr(void) ++{ ++ ulong freq = get_bus_frequency() / 4; ++ printk("time_init: decrementer frequency = %lu.%.6lu MHz\n", ++ freq/1000000, freq%1000000); ++ if (freq == 33000000) ++ freq += 332550; ++ ++ tb_ticks_per_jiffy = freq / HZ; ++ tb_to_us = mulhwu_scale_factor(freq, 1000000); ++ ++ return; ++} ++ ++ ++static ulong iomega8241_get_rtc_time(void) ++{ ++ struct rtc_time tm; ++ int result; ++ ++ spin_lock(&rtc_lock); ++ result = ds1337_do_command(0, DS1337_GET_DATE, &tm); ++ spin_unlock(&rtc_lock); ++ ++ if (result == 0) ++ result = mktime(tm.tm_year+1900, tm.tm_mon, tm.tm_mday, ++ tm.tm_hour, tm.tm_min, tm.tm_sec); ++ ++ return result; ++} ++ ++ ++static int iomega8241_set_rtc_time(unsigned long nowtime) ++{ ++ struct rtc_time tm; ++ int result; ++ ++ to_tm(nowtime, &tm); ++ tm.tm_year -= 1900; ++ spin_lock(&rtc_lock); ++ result = ds1337_do_command(0, DS1337_SET_DATE, &tm); ++ spin_unlock(&rtc_lock); ++ ++ return result; ++} ++ ++ ++static void __init ++iomega8241_init2(void) ++{ ++ ppc_md.set_rtc_time = iomega8241_set_rtc_time; ++ ppc_md.get_rtc_time = iomega8241_get_rtc_time; ++} ++ ++ ++void __init ++platform_init(unsigned long r3, unsigned long r4, unsigned long r5, ++ unsigned long r6, unsigned long r7) ++{ ++ parse_bootinfo(find_bootinfo()); ++ ++ /* ASSUMPTION: If both r3 (bd_t pointer) and r6 (cmdline pointer) ++ * are non-zero, then we should use the board info from the bd_t ++ * structure and the cmdline pointed to by r6 instead of the ++ * information from birecs, if any. Otherwise, use the information ++ * from birecs as discovered by the preceeding call to ++ * parse_bootinfo(). This rule should work with both PPCBoot, which ++ * uses a bd_t board info structure, and the kernel boot wrapper, ++ * which uses birecs. ++ */ ++ if (r3 && r6) { ++ /* copy board info structure */ ++ memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) ); ++ /* copy command line */ ++ *(char *)(r7+KERNELBASE) = 0; ++ strcpy(cmd_line, (char *)(r6+KERNELBASE)); ++ } ++ ++#ifdef CONFIG_BLK_DEV_INITRD ++ /* take care of initrd if we have one */ ++ if (r4) { ++ initrd_start = r4 + KERNELBASE; ++ initrd_end = r5 + KERNELBASE; ++ } ++#endif /* CONFIG_BLK_DEV_INITRD */ ++ ++ /* Map in board regs, etc. */ ++ iomega8241_set_bat(); ++ ++ isa_io_base = MPC10X_MAPB_ISA_IO_BASE; ++ isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE; ++ pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET; ++ ISA_DMA_THRESHOLD = 0x00ffffff; ++ DMA_MODE_READ = 0x44; ++ DMA_MODE_WRITE = 0x48; ++ ++ ppc_md.setup_arch = iomega8241_setup_arch; ++ ppc_md.show_cpuinfo = iomega8241_show_cpuinfo; ++ ppc_md.irq_canonicalize = iomega8241_irq_canonicalize; ++ ppc_md.init_IRQ = iomega8241_init_IRQ; ++ ppc_md.get_irq = iomega8241_get_irq; ++ ppc_md.init = iomega8241_init2; ++ ++ ppc_md.restart = iomega8241_restart; ++ ppc_md.power_off = iomega8241_power_off; ++ ppc_md.halt = iomega8241_halt; ++ ++ ppc_md.find_end_of_memory = iomega8241_find_end_of_memory; ++ ppc_md.setup_io_mappings = iomega8241_map_io; ++ ++ ppc_md.time_init = NULL; ++ ppc_md.set_rtc_time = NULL; ++ ppc_md.get_rtc_time = NULL; ++ ppc_md.calibrate_decr = iomega8241_calibrate_decr; ++ ++/* ++ * extra credit: ++ * ++ * ppc_md.nvram_read_val = todc_mc146818_read_val; ++ * ppc_md.nvram_write_val = todc_mc146818_write_val; ++ */ ++#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) ++ ppc_ide_md.default_irq = iomega8241_ide_default_irq; ++ ppc_ide_md.default_io_base = iomega8241_ide_default_io_base; ++ ppc_ide_md.ide_init_hwif = iomega8241_ide_init_hwif_ports; ++#endif ++ ++} +--- linux-2.6.15.orig/arch/ppc/Kconfig 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/arch/ppc/Kconfig 2008-01-01 22:12:32.365126129 -0800 +@@ -649,6 +649,15 @@ + End of Life: - + URL: <http://www.windriver.com/> + ++config IOMEGA8241 ++ bool "IOMEGA8241" ++ ---help--- ++ Iomega StorCenter Network Hard Drive ++ Manufacturer: Iomega Corporation ++ Date of Release: May 2005 ++ End of Life: - ++ URL: <http://www.iomega.com/> ++ + config SBS8260 + bool "SBS8260" + +@@ -801,7 +810,7 @@ + depends on SANDPOINT || SPRUCE || PPLUS || \ + PRPMC750 || PRPMC800 || LOPEC || \ + (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ +- 83xx ++ 83xx || IOMEGA8241 + default y + + config FORCE +@@ -870,13 +879,13 @@ + + config MPC10X_BRIDGE + bool +- depends on POWERPMC250 || LOPEC || SANDPOINT ++ depends on POWERPMC250 || LOPEC || SANDPOINT || IOMEGA8241 + select PPC_INDIRECT_PCI + default y + + config MPC10X_OPENPIC + bool +- depends on POWERPMC250 || LOPEC || SANDPOINT ++ depends on POWERPMC250 || LOPEC || SANDPOINT || IOMEGA8241 + default y + + config MPC10X_STORE_GATHERING +--- linux-2.6.15.orig/arch/ppc/boot/Makefile 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/arch/ppc/boot/Makefile 2008-01-01 22:12:32.365126129 -0800 +@@ -13,7 +13,7 @@ + CFLAGS += -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include + HOSTCFLAGS += -Iarch/$(ARCH)/boot/include + +-BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd ++BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd uImage + + bootdir-y := simple + bootdir-$(CONFIG_PPC_OF) += openfirmware +--- linux-2.6.15.orig/arch/ppc/boot/simple/Makefile 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/arch/ppc/boot/simple/Makefile 2008-01-01 22:12:32.365126129 -0800 +@@ -158,6 +158,10 @@ + end-$(CONFIG_SANDPOINT) := sandpoint + cacheflag-$(CONFIG_SANDPOINT) := -include $(clear_L2_L3) + ++ end-$(CONFIG_IOMEGA8241) := iomega8241 ++ cacheflag-$(CONFIG_IOMEGA8241) := -include $(clear_L2_L3) ++ ++ + zimage-$(CONFIG_SPRUCE) := zImage-TREE + zimageinitrd-$(CONFIG_SPRUCE) := zImage.initrd-TREE + end-$(CONFIG_SPRUCE) := spruce +--- linux-2.6.15.orig/arch/ppc/platforms/Makefile 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/arch/ppc/platforms/Makefile 2008-01-01 22:12:32.365126129 -0800 +@@ -42,6 +42,7 @@ + obj-$(CONFIG_RADSTONE_PPC7D) += radstone_ppc7d.o + obj-$(CONFIG_SANDPOINT) += sandpoint.o + obj-$(CONFIG_SBC82xx) += sbc82xx.o ++obj-$(CONFIG_IOMEGA8241) += iomega8241.o + obj-$(CONFIG_SPRUCE) += spruce.o + obj-$(CONFIG_LITE5200) += lite5200.o + obj-$(CONFIG_EV64360) += ev64360.o +--- linux-2.6.15.orig/arch/ppc/platforms/iomega8241.h 1969-12-31 16:00:00.000000000 -0800 ++++ linux-2.6.15/arch/ppc/platforms/iomega8241.h 2008-01-01 22:12:32.365126129 -0800 +@@ -0,0 +1,66 @@ ++/* ++ * arch/ppc/platforms/iomega8241.h ++ * ++ * The Iomega StorCenter Network Hard Drive platform is based on the ++ * original sandpoint test platform. That GNU copyright information ++ * is reproduced below: ++ * ++ * Board setup routines for the Motorola SPS Sandpoint Test Platform. ++ * ++ * Author: Mark A. Greer ++ * mgreer@mvista.com ++ * ++ * 2000-2003 (c) MontaVista Software, Inc. This file is licensed under ++ * the terms of the GNU General Public License version 2. This program ++ * is licensed "as is" without any warranty of any kind, whether express ++ * or implied. ++ */ ++ ++#ifndef __PPC_PLATFORMS_IOMEGA8241_H ++#define __PPC_PLATFORMS_IOMEGA8241_H ++ ++#include <asm/ppcboot.h> ++#include <linux/config.h> ++ ++/* ++ * G2 Configuration: ++ * ++ * DEVICE IDSEL INTERRUPT NUMBER ++ * AN983B AD12 IRQ0 ++ * IDE Via DS6410 AD13 IRQ1 ++ * NEC USB uPD720101 AD14 IRQ2,3,4 ++ */ ++ ++#define IDE_INTRUPT 1 ++ ++/* ++ * The sandpoint boards have processor modules that either have an 8240 or ++ * an MPC107 host bridge on them. These bridges have an IDSEL line that allows ++ * them to respond to PCI transactions as if they were a normal PCI devices. ++ * However, the processor on the processor side of the bridge can not reach ++ * out onto the PCI bus and then select the bridge or bad things will happen ++ * (documented in the 8240 and 107 manuals). ++ * Because of this, we always skip the bridge PCI device when accessing the ++ * PCI bus. The PCI slot that the bridge occupies is defined by the macro ++ * below. ++ */ ++#define IOMEGA8241_HOST_BRIDGE_IDSEL 12 ++ ++void board_find_bridges(void); ++void iomega8241_fix_uart(void); ++/* ++ * Serial defines. ++ */ ++#define IOMEGA8241_SERIAL_0 0xFDF04500 ++#define IOMEGA8241_SERIAL_1 0xFDF04600 ++ ++#define RS_TABLE_SIZE 4 ++ ++/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ ++#define BASE_BAUD ( 100000000 / 16 ) /* 100Mhz speed, divided by 16 ++ to make the output freqency*/ ++#define UART_CLK 1843200 ++ ++#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) ++ ++#endif /* __PPC_PLATFORMS_IOMEGA8241_H */ +--- linux-2.6.15.orig/arch/ppc/syslib/Makefile 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/arch/ppc/syslib/Makefile 2008-01-01 22:12:32.365126129 -0800 +@@ -71,6 +71,7 @@ + obj-$(CONFIG_PRPMC800) += open_pic.o pci_auto.o + obj-$(CONFIG_RADSTONE_PPC7D) += pci_auto.o + obj-$(CONFIG_SANDPOINT) += pci_auto.o todc_time.o ++obj-$(CONFIG_IOMEGA8241) += pci_auto.o + obj-$(CONFIG_SBC82xx) += todc_time.o + obj-$(CONFIG_SPRUCE) += cpc700_pic.o pci_auto.o \ + todc_time.o +--- linux-2.6.15.orig/arch/ppc/syslib/mpc10x_common.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/arch/ppc/syslib/mpc10x_common.c 2008-01-01 22:12:32.365126129 -0800 +@@ -35,6 +35,10 @@ + #include <asm/mpc10x.h> + #include <asm/ppc_sys.h> + ++#ifdef CONFIG_IOMEGA8241 ++#define NUM_8259_INTERRUPTS 0 ++#endif ++ + #ifdef CONFIG_MPC10X_OPENPIC + #ifdef CONFIG_EPIC_SERIAL_MODE + #define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5) +--- linux-2.6.15.orig/drivers/char/Kconfig 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/char/Kconfig 2008-01-01 22:12:32.369126358 -0800 +@@ -999,6 +999,25 @@ + The mmtimer device allows direct userspace access to the + Altix system timer. + ++config 8241EMI ++ tristate "EMI fixes for the 8241 processor" ++ depends on IOMEGA8241 ++ default y ++ help ++ By changing the ODCR value from 0xAB to 0x95, we are able to reduce ++ the EMI along the PCI and MEMORY buses. ++ ++ msb 7 1 Controls the drive strength of DRV_PCI (40ohm) ++ 6 0 reserved ++ 5-4 01 Controls the drive strength of SDRAM_CLK (40ohm) ++ 3-2 01 Controls the drive strength of PCI_CLK and ++ PCI_CLK_SYNC_OUT (40ohm) ++ 1-0 01 Controls the drive strength of SDRAM_CLK and ++ SDRAM_SYNC_OUT (40ohm) ++ ++ See table 4-19 on page 4-22 of the MPC8245 Integrated Processor ++ User's Manual for details on these registers. ++ + source "drivers/char/tpm/Kconfig" + + config TELCLOCK +--- linux-2.6.15.orig/drivers/char/Makefile 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/char/Makefile 2008-01-01 22:12:32.369126358 -0800 +@@ -48,6 +48,7 @@ + obj-$(CONFIG_VIOTAPE) += viotape.o + obj-$(CONFIG_HVCS) += hvcs.o + obj-$(CONFIG_SGI_MBCS) += mbcs.o ++obj-$(CONFIG_8241EMI) += emiregs.o + + obj-$(CONFIG_PRINTER) += lp.o + obj-$(CONFIG_TIPAR) += tipar.o +--- linux-2.6.15.orig/drivers/char/emiregs.c 1969-12-31 16:00:00.000000000 -0800 ++++ linux-2.6.15/drivers/char/emiregs.c 2008-01-01 22:12:32.369126358 -0800 +@@ -0,0 +1,68 @@ ++#include <linux/init.h> ++#include <linux/module.h> ++ ++MODULE_LICENSE ("GPL"); ++ ++/* ++ The following CONFIG_READ_BYTE and CONFIG_WRITE_BYTE ++ functions were taken from u-boot ++ ++ By changing the ODCR value from 0xAB to 0x95, we are able to reduce ++ the EMI along the PCI and MEMORY buses. ++ ++ msb 7 1 Controls the drive strength of DRV_PCI (40ohm) ++ 6 0 reserved ++ 5-4 01 Controls the drive strength of SDRAM_CLK (40ohm) ++ 3-2 01 Controls the drive strength of PCI_CLK and ++ PCI_CLK_SYNC_OUT (40ohm) ++ 1-0 01 Controls the drive strength of SDRAM_CLK and ++ SDRAM_SYNC_OUT (40ohm) ++ ++ See table 4-19 on page 4-22 of the MPC8245 Integrated Processor ++ User's Manual for details on these registers. ++*/ ++#define CONFIG_ADDR 0xfec00000 ++#define CONFIG_DATA 0xfee00000 ++ ++#define CONFIG_READ_BYTE( addr, reg ) \ ++ __asm__ ( \ ++ " stwbrx %1, 0, %2\n \ ++ sync\n \ ++ lbz %0, %4(%3)\n \ ++ sync " \ ++ : "=r" (reg) \ ++ : "r" ((addr) & ~3), "r" (CONFIG_ADDR), \ ++ "b" (CONFIG_DATA), "n" ((addr) & 3)); ++ ++#define CONFIG_WRITE_BYTE( addr, data ) \ ++ __asm__ __volatile__( \ ++ " stwbrx %1, 0, %0\n \ ++ sync\n \ ++ stb %3, %4(%2)\n \ ++ sync " \ ++ : /* no output */ \ ++ : "r" (CONFIG_ADDR), "r" ((addr) & ~3), \ ++ "b" (CONFIG_DATA), "r" (data), \ ++ "n" ((addr) & 3)); ++ ++ ++static int emiregs_init (void) ++ { ++ u_long val, val2; ++ CONFIG_READ_BYTE (0x80000073, val); ++ CONFIG_WRITE_BYTE (0x80000073, 0x95); ++ CONFIG_READ_BYTE (0x80000073, val2); ++ ++ printk (KERN_INFO "8241 ODCR: changed from 0x%02lx, to 0x%02lx\n", val, val2); ++ ++ return 0; ++ } ++ ++static void emiregs_exit (void) ++ { ++ printk (KERN_INFO "emiregs module exitting\n"); ++ return; ++ } ++ ++module_init (emiregs_init); ++module_exit (emiregs_exit); +--- linux-2.6.15.orig/drivers/char/rtc.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/char/rtc.c 2008-01-01 22:12:32.369126358 -0800 +@@ -514,9 +514,16 @@ + } + case RTC_RD_TIME: /* Read the time/date from RTC */ + { ++#ifdef CONFIG_IOMEGA8241 ++ unsigned long usi_time; ++ usi_time = ds1337_get_time(); ++ to_tm(usi_time,wtime); ++ break; ++#else + memset(&wtime, 0, sizeof(struct rtc_time)); + rtc_get_rtc_time(&wtime); + break; ++#endif /* CONFIG_IOMEGA8241 */ + } + case RTC_SET_TIME: /* Set the RTC */ + { +@@ -558,7 +565,7 @@ + + if ((yrs -= epoch) > 255) /* They are unsigned */ + return -EINVAL; +- ++#ifndef CONFIG_IOMEGA8241 + spin_lock_irq(&rtc_lock); + #ifdef CONFIG_MACH_DECSTATION + real_yrs = yrs; +@@ -614,6 +621,11 @@ + + spin_unlock_irq(&rtc_lock); + return 0; ++#else /* CONFIG_IOMEGA8241 */ ++ /* next is the forth API provided by ds1337.c USI-SS */ ++ ds1337_usi_set_time(yrs,mon,day,hrs,min,sec); ++ break; ++#endif /* CONFIG_IOMEGA8241 */ + } + #ifdef RTC_IRQ + case RTC_IRQP_READ: /* Read the periodic IRQ rate. */ +--- linux-2.6.15.orig/drivers/i2c/busses/i2c-mpc.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/i2c/busses/i2c-mpc.c 2008-01-01 22:12:32.369126358 -0800 +@@ -285,7 +285,11 @@ + .algo = &mpc_algo, + .class = I2C_CLASS_HWMON, + .timeout = 1, ++#ifdef CONFIG_IOMEGA8241 ++ .retries = 400 ++#else + .retries = 1 ++#endif /* CONFIG_IOMEGA8241 */ + }; + + static int fsl_i2c_probe(struct platform_device *pdev) +--- linux-2.6.15.orig/drivers/ide/pci/via82cxxx.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/ide/pci/via82cxxx.c 2008-01-02 08:21:42.876113109 -0800 +@@ -305,6 +305,12 @@ + */ + + pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); ++#ifdef CONFIG_IOMEGA8241 ++ if(via_config->id == PCI_DEVICE_ID_VIA_6410) { ++ pci_write_config_byte(dev, VIA_IDE_ENABLE, v | 0x3); ++ } ++#endif ++ + + /* + * Set up FIFO sizes and thresholds. +@@ -485,7 +492,11 @@ + .channels = 2, + .autodma = AUTODMA, + .enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}}, ++#ifdef CONFIG_IOMEGA8241 ++ .bootable = NEVER_BOARD, ++#else + .bootable = ON_BOARD, ++#endif + } + }; + +--- linux-2.6.15.orig/drivers/mtd/maps/Kconfig 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/mtd/maps/Kconfig 2008-01-01 22:12:32.369126358 -0800 +@@ -639,5 +639,10 @@ + + This selection automatically selects the map_ram driver. + +-endmenu ++config MTD_IOMEGA8241 ++ tristate "Map driver for the Iomega 8241 StorCenter board" ++ depends on IOMEGA8241 ++ help ++ Map driver for the Iomega StorCenter Network Hard Drive. + ++endmenu +--- linux-2.6.15.orig/drivers/mtd/maps/Makefile 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/mtd/maps/Makefile 2008-01-01 22:12:32.369126358 -0800 +@@ -68,6 +68,7 @@ + obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o + obj-$(CONFIG_MTD_DMV182) += dmv182.o + obj-$(CONFIG_MTD_SHARP_SL) += sharpsl-flash.o ++obj-$(CONFIG_MTD_IOMEGA8241) += iomega8241_mtd.o + obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o +--- linux-2.6.15.orig/drivers/mtd/maps/iomega8241_mtd.c 1969-12-31 16:00:00.000000000 -0800 ++++ linux-2.6.15/drivers/mtd/maps/iomega8241_mtd.c 2008-01-01 22:12:32.369126358 -0800 +@@ -0,0 +1,102 @@ ++/* ++ * drivers/mtd/maps/iomega8241_mtd.c ++ * ++ * Iomega Corporation ++ * ++ * Flash mapping for the Iomega StorCenter Network Hard Drive ++ * ++ * This module is based on the mpc1211.c file created by ++ * Saito.K & Jeanne <ksaito@interface.co.jp> ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <asm/io.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/map.h> ++#include <linux/config.h> ++#include <linux/mtd/partitions.h> ++ ++#include <asm/immap_cpm2.h> ++ ++static struct mtd_info *iomegamtd; ++static struct mtd_partition *parsed_parts; ++ ++struct map_info iomega8241_flash_map = { ++ .name = "Flash", ++ .phys = 0xFF800000, ++ .size = 0x800000, ++ .bankwidth = 1, ++}; ++ ++static struct mtd_partition iomega8241_partitions[] = { ++ { ++ .name = "kernel", ++ /* 1507328 bytes: kernel space */ ++ .size = 0x00170000, ++ .offset = 0, ++ }, { ++ .name = "filesystem", ++ /* 5832704 bytes: root partition */ ++ .size = 0x00590000, ++ /* start is FF970000 */ ++ .offset = MTDPART_OFS_APPEND, ++ }, { ++ .name = "bootloader", ++ /* 262144 bytes for u-boot */ ++ .size = 0x00040000, ++ /* start is FFF00000 */ ++ .offset = MTDPART_OFS_APPEND, ++ }, { ++ .name = "sysconfig", ++ /* 786432 bytes: sysconf partition */ ++ .size = 0x000C0000, ++ /* start is FFF40000 */ ++ .offset = MTDPART_OFS_APPEND, ++ } ++}; ++ ++static int __init ++init_iomega8241_flash(void) ++{ ++ int nr_parts; ++ ++ iomega8241_flash_map.virt = ioremap(iomega8241_flash_map.phys, iomega8241_flash_map.size); ++ ++ simple_map_init(&iomega8241_flash_map); ++ ++ printk("Iomega8241: Probing for flash...\n"); ++ iomegamtd = do_map_probe("cfi_probe", &iomega8241_flash_map); ++ if (!iomegamtd) { ++ printk(KERN_NOTICE "Flash chips not detected at either possible location.\n"); ++ return -ENXIO; ++ } ++ printk("Iomega8241: Flash found at location 0x%x\n", iomega8241_flash_map.phys); ++ iomegamtd->owner = THIS_MODULE; ++ ++ parsed_parts = iomega8241_partitions; ++ nr_parts = ARRAY_SIZE(iomega8241_partitions); ++ ++ add_mtd_partitions(iomegamtd, parsed_parts, nr_parts); ++ return 0; ++} ++ ++static void __exit ++cleanup_iomega8241_flash(void) ++{ ++ if (parsed_parts) ++ del_mtd_partitions(iomegamtd); ++ else ++ del_mtd_device(iomegamtd); ++ map_destroy(iomegamtd); ++} ++ ++module_init(init_iomega8241_flash); ++module_exit(cleanup_iomega8241_flash); ++ ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Anthony Russello <russello@iomega.com>"); ++MODULE_DESCRIPTION("Flash mapping for the Iomega StorCenter Network Hard Drive"); +--- linux-2.6.15.orig/drivers/net/wireless/prism54/islpci_dev.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/net/wireless/prism54/islpci_dev.c 2008-01-01 22:12:32.369126358 -0800 +@@ -874,6 +874,7 @@ + + /* select the firmware file depending on the device id */ + switch (pdev->device) { ++ case 0x3873: + case 0x3877: + strcpy(priv->firmware, ISL3877_IMAGE_FILE); + break; +--- linux-2.6.15.orig/drivers/net/wireless/prism54/islpci_hotplug.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/net/wireless/prism54/islpci_hotplug.c 2008-01-01 22:12:32.373126589 -0800 +@@ -70,6 +70,13 @@ + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, 0 + }, ++ /* Intersil PRISM NetGate 2511 MP PLUS 100mW */ ++ { ++ 0x1260, 0x3873, ++ PCI_ANY_ID, PCI_ANY_ID, ++ 0, 0, 0 ++ }, ++ + + /* End of list */ + {0,0,0,0,0,0,0} +--- linux-2.6.15.orig/drivers/pci/probe.c 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/drivers/pci/probe.c 2008-01-01 22:12:32.373126589 -0800 +@@ -596,6 +596,20 @@ + pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); + class >>= 8; /* upper 3 bytes */ + dev->class = class; ++#ifdef CONFIG_IOMEGA8241 ++ /* ++ * The VIA VT6410 used on the Iomega StorCenter Network Hard Drive reports ++ * with a class of 0x01040 (PCI_CLASS_STORAGE_RAID). ++ * ++ * The following correction allows it to be used as a standard PCI IDE ++ * controller (0x0101) ++ */ ++ if((dev->vendor==PCI_VENDOR_ID_VIA)&&(dev->device==PCI_DEVICE_ID_VIA_6410)) { ++ dev->class=0x01018f; ++ printk("PCI: Adjustments for the VIA VT6410 controller have been made\n"); ++ } ++#endif /* CONFIG_IOMEGA8241 */ ++ + class >>= 8; + + pr_debug("PCI: Found %s [%04x/%04x] %06x %02x\n", pci_name(dev), +--- linux-2.6.15.orig/include/asm-ppc/mpc10x.h 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/include/asm-ppc/mpc10x.h 2008-01-01 22:12:32.373126589 -0800 +@@ -76,7 +76,11 @@ + + #define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 + #define MPC10X_MAPB_PCI_IO_START 0x00000000 ++#ifdef CONFIG_IOMEGA8241 ++#define MPC10X_MAPB_PCI_IO_END 0xFFFF ++#else + #define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) ++#endif /* CONFIG_IOMEGA8241 */ + #define MPC10X_MAPB_PCI_MEM_START 0x80000000 + #define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) + +@@ -157,7 +161,12 @@ + */ + extern unsigned long ioremap_base; + #define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) ++ ++#ifdef CONFIG_IOMEGA8241 ++#define MPC10X_MAPB_EUMB_BASE 0xFDF00000 ++#else + #define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE ++#endif + + enum ppc_sys_devices { + MPC10X_IIC1, +--- linux-2.6.15.orig/include/asm-ppc/serial.h 2006-01-02 19:21:10.000000000 -0800 ++++ linux-2.6.15/include/asm-ppc/serial.h 2008-01-01 22:12:32.373126589 -0800 +@@ -38,6 +38,8 @@ + #include <asm/mpc85xx.h> + #elif defined(CONFIG_RADSTONE_PPC7D) + #include <platforms/radstone_ppc7d.h> ++#elif defined(CONFIG_IOMEGA8241) ++#include <platforms/iomega8241.h> + #else + + /* diff --git a/packages/linux/linux-storcenter_2.6.15.7.bb b/packages/linux/linux-storcenter_2.6.15.7.bb new file mode 100644 index 0000000000..4895b2174e --- /dev/null +++ b/packages/linux/linux-storcenter_2.6.15.7.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "Linux Kernel for the Iomega storcenter platform" +SECTION = "kernel" +LICENSE = "GPL" +DEPENDS = "u-boot-utils-native" +PR = "r1" + +COMPATIBLE_MACHINE = "storcenter" + +SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ + file://kernel.patch-${PV};patch=1 \ + file://defconfig-${PV} " + +S = "${WORKDIR}/linux-${PV}" + +inherit kernel + +export ARCH = "ppc" + +KERNEL_IMAGETYPE = "uImage" +KERNEL_OUTPUT = "arch/${ARCH}/boot/images/${KERNEL_IMAGETYPE}" + +do_configure() { + install -m 644 ${WORKDIR}/defconfig-${PV} ${S}/.config + make ARCH=${ARCH} oldconfig +} + +do_deploy() { + install -d ${DEPLOY_DIR_IMAGE} + install -m 0644 ${KERNEL_OUTPUT} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME} +} + +do_deploy[dirs] = "${S}" + +addtask deploy before do_build after do_compile + + |