diff options
90 files changed, 34439 insertions, 112 deletions
diff --git a/conf/checksums.ini b/conf/checksums.ini index b55af9fa7f..ca7994be00 100644 --- a/conf/checksums.ini +++ b/conf/checksums.ini @@ -12802,3 +12802,7 @@ sha256=12f5b654f6b91953391d2492a09d2c9586d5b7af419f0eeb306e1d30245659d3 md5=a6538f6c44ceeed0ed7e8e356f444168 sha256=f684397ce39ec400ba3369521892b7c3a8711d3ef1be59115db9f8d57707bbb8 +[http://projects.o-hand.com/sources/xrestop/xrestop-0.4.tar.gz] +md5=d8a54596cbaf037e62b80c4585a3ca9b +sha256=67c2fc94a7ecedbaae0d1837e82e93d1d98f4a6d759828860e552119af3ce257 + diff --git a/conf/distro/include/sane-srcrevs.inc b/conf/distro/include/sane-srcrevs.inc index 6528705b5d..70ecf0696d 100644 --- a/conf/distro/include/sane-srcrevs.inc +++ b/conf/distro/include/sane-srcrevs.inc @@ -26,7 +26,7 @@ SRCREV_pn-kismet ?= "2285" SRCREV_pn-kismet-newcore ?= "2285" SRCREV_pn-libfakekey ?= "1455" SRCREV_pn-libgsmd ?= "3074" -SRCREV_pn-libjana ?= "657" +SRCREV_pn-libjana ?= "662" SRCREV_pn-libmokogsmd2 ?= "2950" SRCREV_pn-libmokojournal2 ?= "3217" SRCREV_pn-libmokopanelui2 ?= "3226" @@ -73,7 +73,7 @@ SRCREV_pn-openmoko-icon-theme-standard2 ?= "3225" SRCREV_pn-openmoko-icon-theme-standard2-qvga ?= "3225" SRCREV_pn-openmoko-keyboard ?= "1631" SRCREV_pn-openmoko-libs ?= "2367" -SRCREV_pn-openmoko-mediaplayer2 ?= "3261" +SRCREV_pn-openmoko-mediaplayer2 ?= "3263" SRCREV_pn-openmoko-messages ?= "2276" SRCREV_pn-openmoko-panel-battery ?= "2897" SRCREV_pn-openmoko-panel-bt ?= "2896" diff --git a/packages/cairo/cairo-1.4.10/.mtn2git_empty b/packages/cairo/cairo-1.4.10/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/cairo/cairo-1.4.10/.mtn2git_empty diff --git a/packages/cairo/cairo-1.4.10/stats.patch b/packages/cairo/cairo-1.4.10/stats.patch new file mode 100644 index 0000000000..63df25c942 --- /dev/null +++ b/packages/cairo/cairo-1.4.10/stats.patch @@ -0,0 +1,33 @@ +See cairo mailing list 15-10-2007 patch by Soeren Sandmann. +Fixes unreliable results for cairo-perf. + +diff --git a/perf/cairo-perf.c b/perf/cairo-perf.c +index 360f2dd..a8d7abc 100644 +--- a/perf/cairo-perf.c ++++ b/perf/cairo-perf.c +@@ -166,22 +166,11 @@ cairo_perf_run (cairo_perf_t *perf, + cairo_perf_ticks_per_second () / 1000.0); + printf (" %lld", times[i]); + } else { +- if (i > 0) { +- _cairo_stats_compute (&stats, times, i+1); +- +- if (stats.std_dev <= CAIRO_PERF_LOW_STD_DEV && +- ! perf->exact_iterations) +- { +- low_std_dev_count++; +- if (low_std_dev_count >= CAIRO_PERF_STABLE_STD_DEV_COUNT) +- break; +- } else { +- low_std_dev_count = 0; +- } +- } + } + } + ++ _cairo_stats_compute (&stats, times, i+1); ++ + if (perf->raw) { + printf ("\n"); + } else { +diff --git a/perf/cairo-stats.c b/perf/cairo-stats.c diff --git a/packages/cairo/cairo_1.4.10.bb b/packages/cairo/cairo_1.4.10.bb index 845e14fc29..e89c0e6a9c 100644 --- a/packages/cairo/cairo_1.4.10.bb +++ b/packages/cairo/cairo_1.4.10.bb @@ -1,6 +1,9 @@ require cairo.inc -SRC_URI = "http://cairographics.org/releases/cairo-${PV}.tar.gz" +DEFAULT_PREFERENCE = "-1" + +SRC_URI = "http://cairographics.org/releases/cairo-${PV}.tar.gz \ +file://stats.patch;patch=1;p=1" PR = "r0" diff --git a/packages/linux/linux-ezx-2.6.23/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/a1200/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/a1200/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/a1200/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/a1200/defconfig b/packages/linux/linux-ezx-2.6.23/a1200/defconfig new file mode 100755 index 0000000000..4649d7ba96 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/a1200/defconfig @@ -0,0 +1,1208 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:03:17 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +CONFIG_PXA_EZX_A1200=y +# CONFIG_PXA_EZX_E6 is not set +# CONFIG_EZX_BP is not set +CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y +# CONFIG_EZX_EMU is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +CONFIG_MTD_EZX=y +# CONFIG_MTD_EZX_A780 is not set +# CONFIG_MTD_EZX_A780_ALTERNATE is not set +CONFIG_MTD_EZX_A1200=y +# CONFIG_MTD_EZX_E2 is not set +# CONFIG_MTD_EZX_E6 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_EZX is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/a780/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/a780/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/a780/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/a780/defconfig b/packages/linux/linux-ezx-2.6.23/a780/defconfig new file mode 100755 index 0000000000..921fa94b69 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/a780/defconfig @@ -0,0 +1,1214 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:00:57 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +CONFIG_PXA_EZX_A780=y +# CONFIG_PXA_EZX_E2 is not set +# CONFIG_PXA_EZX_A1200 is not set +# CONFIG_PXA_EZX_E6 is not set +CONFIG_EZX_BP=y +CONFIG_EZX_PCAP=y +# CONFIG_EZX_EOC is not set +CONFIG_EZX_EMU=y +CONFIG_EZX_EMU_USB=y +# CONFIG_EZX_EMU_UART is not set +# CONFIG_EZX_EMU_NOTHING is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000 mem=16M@0xAC000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +CONFIG_MTD_EZX=y +CONFIG_MTD_EZX_A780=y +# CONFIG_MTD_EZX_A780_ALTERNATE is not set +# CONFIG_MTD_EZX_A1200 is not set +# CONFIG_MTD_EZX_E2 is not set +# CONFIG_MTD_EZX_E6 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_TS0710_MUX=y +CONFIG_TS0710_MUX_USB=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_A780=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_EZX=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/e680/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/e680/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/e680/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/e680/defconfig b/packages/linux/linux-ezx-2.6.23/e680/defconfig new file mode 100755 index 0000000000..9a30ce673f --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/e680/defconfig @@ -0,0 +1,1584 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21.4 +# Sun Sep 9 16:51:47 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=1 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +CONFIG_PXA_EZX=y +CONFIG_PXA_EZX_E680=y +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +# CONFIG_PXA_EZX_A1200 is not set +# CONFIG_PXA_EZX_E6 is not set +CONFIG_EZX_BP=y +CONFIG_EZX_PCAP=y +CONFIG_EZX_EMU=y +CONFIG_EZX_EMU_USB=y +# CONFIG_EZX_EMU_UART is not set +# CONFIG_EZX_EMU_NOTHING is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_PREEMPT=y +CONFIG_NO_IDLE_HZ=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000 mem=16M@0xAC000000" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +# CONFIG_IPV6_ROUTE_INFO is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK_SUPPORT=y +# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211_CRYPT_TKIP is not set +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +CONFIG_CONNECTOR=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +CONFIG_MTD_EZX=y +CONFIG_MTD_EZX_A780=y +# CONFIG_MTD_EZX_A780_ALTERNATE is not set +# CONFIG_MTD_EZX_E2 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# PHY device support +# + +# +# Ethernet (10 or 100Mbit) +# +# CONFIG_NET_ETHERNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y +CONFIG_NET_WIRELESS_RTNETLINK=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_HOSTAP is not set +# CONFIG_ZD1211RW is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_SHAPER=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +CONFIG_TS0710_MUX=y +CONFIG_TS0710_MUX_USB=y + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_PXA=m +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# LED devices +# +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_E680 is not set +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_VIDEO_V4L2=y + +# +# Video Capture Adapters +# + +# +# Video Capture Adapters +# +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set + +# +# V4L USB devices +# +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set +# CONFIG_USB_W9968CF is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set + +# +# Radio Adapters +# +# CONFIG_USB_DSBR is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_BACKLIGHT_EZX=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DUMMY=m +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_AC97=m + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set + +# +# SoC audio support +# +CONFIG_SND_SOC=y + +# +# SoC Platforms +# + +# +# SoC Audio for the Atmel AT91 +# + +# +# SoC Audio for the Intel PXA2xx +# +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=m +CONFIG_RTC_INTF_PROC=m +CONFIG_RTC_INTF_DEV=m +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SA1100=m +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=n +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y diff --git a/packages/linux/linux-ezx-2.6.23/patches/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/patches/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/patches/Makefile.OpenEZX b/packages/linux/linux-ezx-2.6.23/patches/Makefile.OpenEZX new file mode 100644 index 0000000000..e7e9115e3c --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/Makefile.OpenEZX @@ -0,0 +1,77 @@ +# Makefile used to build binary images of OpenEZX kernels +# +# If you are currently in the linux kernel toplevel dir, +# you can call this Makefile with: +# $ make -f path_to/Makefile.OpenEZX +# +# Note that you can set the CROSS_COMPILE and QUILT_PATCHES variable +# in your environment. +# + +PHONES = a780 e680 a1200 e6 e2 + +CROSS_COMPILE ?= /home/wyrm/ezx/dev/cross/bin/arm-angstrom-linux-gnueabi- +QUILT_PATCHES ?= patches + +LV ?= ezxdev# replace LOCALVERSION string +J ?= 2 # simultaneous jobs +SIG ?= 0 # BOOL sign md5sums file + +DATE = $(shell date +%Y%m%d) +DEPLOY_SERVER ?= people.openezx.org +DEPLOY_DIR ?= public_html/images/$(DATE)/ + +all: $(foreach p, $(PHONES), zImage-$(p) modules-$(p).tar.gz) + +zImages: $(foreach p, $(PHONES), zImage-$(p)) + +modules: $(foreach p, $(PHONES), modules-$(p).tar.gz) + +config: $(foreach p, $(PHONES), config-$(p)) + +config-%: $(QUILT_PATCHES)/defconfig-% + cp $< .config + make ARCH=arm oldconfig + cp .config $< + +deploy: release + ssh $(DEPLOY_SERVER) \ + mkdir -p $(DEPLOY_DIR) + scp ezxrelease-$(DATE).tar $(DEPLOY_SERVER):$(DEPLOY_DIR) + ssh $(DEPLOY_SERVER) \ + cd $(DEPLOY_DIR)\; \ + tar -xf ezxrelease-$(DATE).tar\; \ + rm -f ezxrelease-$(DATE).tar + +release: $(foreach p, $(PHONES), tag-$(p)) + cp md5sums.tmp md5sums + test "$(SIG)" = "1" && \ + cat md5sums.tmp | gpg --clearsign > md5sums \ + ; echo + tar -rf ezxrelease.tar md5sums + rm -f md5sums.tmp md5sums + mv ezxrelease.tar ezxrelease-$(DATE).tar + +tag-%: zImage-% modules-%.tar.gz + p=$(patsubst tag-%,%,$@) && \ + tag=$(shell cat include/config/kernel.release)-$(DATE) && \ + mv zImage-$$p zImage-$$tag-$$p && \ + mv modules-$$p.tar.gz modules-$$tag-$$p.tar.gz && \ + tar -rf ezxrelease.tar zImage-$$tag-$$p modules-$$tag-$$p.tar.gz && \ + md5sum zImage-$$tag-$$p modules-$$tag-$$p.tar.gz >> md5sums.tmp && \ + rm -f zImage-$$tag-$$p modules-$$tag-$$p.tar.gz + +zImage-%: $(QUILT_PATCHES)/defconfig-% + cat $< | sed 's/LOCALVERSION=".*"$$/LOCALVERSION="-$(LV)"/' > .config + make -j$(J) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) zImage + mv arch/arm/boot/zImage $@ + +modules-%.tar.gz: $(QUILT_PATCHES)/defconfig-% + cat $< | sed 's/LOCALVERSION=".*"$$/LOCALVERSION="-$(LV)"/' > .config + -find . -name "*.ko" -print0 | xargs -r0 rm + mkdir -p Makefile.OpenEZX-tmp/$@ + make -j$(J) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) modules + make -j1 ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) \ + INSTALL_MOD_PATH=Makefile.OpenEZX-tmp/$@ modules_install + tar -C Makefile.OpenEZX-tmp/$@ -czf $@ . + rm -rf Makefile.OpenEZX-tmp/ diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-eoc.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-eoc.patch new file mode 100644 index 0000000000..77aec1c629 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a1200-eoc.patch @@ -0,0 +1,20 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-24 20:14:54.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-24 20:15:18.000000000 -0300 +@@ -203,8 +203,15 @@ + }, + }; + ++ ++struct platform_device a1200_eoc_device = { ++ .name = "ezx-eoc", ++ .id = -1, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a1200_pcap_device, ++ &a1200_eoc_device, + }; + + static void __init a1200_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-flip.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-flip.patch new file mode 100644 index 0000000000..d932ca1605 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a1200-flip.patch @@ -0,0 +1,47 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-10-24 19:37:28.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-10-24 19:40:22.000000000 +0200 +@@ -16,6 +16,7 @@ + #include <linux/mmc/host.h> + #include <linux/irq.h> + #include <linux/input.h> ++#include <linux/gpio_keys.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -292,11 +293,34 @@ + .num_resources = ARRAY_SIZE(pcap_ts_resources), + .resource = pcap_ts_resources, + }; ++/* Flip */ ++#undef GPIO_FLIP_PIN ++#define GPIO_FLIP_PIN 15 /* FIXME */ ++static struct gpio_keys_button a1200flip_buttons[] = { ++ [0] = { ++ .code = KEY_SLEEP, ++ .gpio = GPIO_FLIP_PIN, ++ .desc = "A1200 flip", ++ }, ++}; ++ ++static struct gpio_keys_platform_data a1200flip_platform_data = { ++ .buttons = a1200flip_buttons, ++ .nbuttons = 1, ++}; ++static struct platform_device a1200flip_device = { ++ .name = "gpio-keys", ++ .id = -1, ++ .dev = { ++ .platform_data = &a1200flip_platform_data, ++ }, ++}; + + static struct platform_device *devices[] __initdata = { + &a1200_pcap_device, + &a1200_eoc_device, + &pcap_ts_device, ++ &a1200flip_device, + }; + + static void __init a1200_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-kbd.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-kbd.patch new file mode 100644 index 0000000000..5771f6d359 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a1200-kbd.patch @@ -0,0 +1,98 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-25 00:03:01.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-25 02:00:40.000000000 -0300 +@@ -15,6 +15,7 @@ + #include <linux/fb.h> + #include <linux/mmc/host.h> + #include <linux/irq.h> ++#include <linux/input.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -23,11 +24,13 @@ + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> + #include <asm/arch/mmc.h> ++#include <asm/arch/kbd.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); ++extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *); + + #ifdef CONFIG_EZX_PCAP + extern int ezx_pcap_mmcsd_power(int); +@@ -209,6 +212,63 @@ + .id = -1, + }; + ++/* Keypad */ ++static unsigned char a1200_keycode[] = { ++ /* row 0 */ ++ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, ++ /* row 1 */ ++ KEY_RIGHT, KEY_DOWN, KEY_KPENTER, KEY_UP, KEY_LEFT, ++ /* row 2 */ ++ KEY_PAGEDOWN, KEY_CAMERA, KEY_RECORD, KEY_HOME, KEY_PAGEUP, ++ /* row 3 */ ++ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, ++ /* row 4 */ ++ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, ++ /* row 5 */ ++ KEY_RESERVED, KEY_RESERVED, KEY_MENU, KEY_RESERVED, KEY_RESERVED, ++}; ++/* ++static unsigned char a1200_direct_keycode[] = { ++ KEY_CAMERA, ++}; ++*/ ++ ++static int a1200_kbd_init(void) ++{ ++ pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN); /* KP_MKIN<0> */ ++ pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN); /* KP_MKIN<1> */ ++ pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN); /* KP_MKIN<2> */ ++ pxa_gpio_mode(97 | GPIO_ALT_FN_3_IN); /* KP_MKIN<3> */ ++ pxa_gpio_mode(98 | GPIO_ALT_FN_3_IN); /* KP_MKIN<4> */ ++ pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */ ++ pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */ ++ pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */ ++ pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */ ++ pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<4> */ ++ pxa_gpio_mode(108 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<5> */ ++ ++ PKWR = 0xEC000; ++ PGSR3 |= 0x1F80; ++ return 0; ++} ++ ++static struct pxakbd_platform_data a1200_kbd_platform_data = { ++ .init = &a1200_kbd_init, ++ .scan_interval = HZ/40, ++ .matrix = { ++ .keycode = a1200_keycode, ++ .cols = 6, ++ .rows = 5, ++ }, ++/* ++ .direct = { ++ .keycode = a1200_direct_keycode, ++ .num = 1, ++ }, ++*/ ++}; ++ ++ + static struct platform_device *devices[] __initdata = { + &a1200_pcap_device, + &a1200_eoc_device, +@@ -218,6 +278,7 @@ + { + set_pxa_fb_info(&a1200_fb_info); + pxa_set_mci_info(&a1200_mci_platform_data); ++ pxa_set_kbd_info(&a1200_kbd_platform_data); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + } diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-mci.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-mci.patch new file mode 100644 index 0000000000..e5f3257d11 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a1200-mci.patch @@ -0,0 +1,124 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-10-24 18:58:55.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-10-24 19:37:21.000000000 +0200 +@@ -13,6 +13,8 @@ + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/fb.h> ++#include <linux/mmc/host.h> ++#include <linux/irq.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -20,12 +22,102 @@ + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> ++#include <asm/arch/mmc.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); + ++#ifdef CONFIG_EZX_PCAP ++extern int ezx_pcap_mmcsd_power(int); ++extern void ezx_pcap_mmcsd_voltage(u_int32_t); ++#else ++#define ezx_pcap_mmcsd_voltage(x) {} ++#define ezx_pcap_mmcsd_power(x) {} ++#endif ++ ++static struct pxamci_platform_data a1200_mci_platform_data; ++ ++static u_int8_t mmc_voltage[] = { ++ [ilog2(MMC_VDD_165_195)] = 6, ++ [ilog2(MMC_VDD_20_21)] = 7, ++ [ilog2(MMC_VDD_21_22)] = 8, ++ [ilog2(MMC_VDD_22_23)] = 8, ++ [ilog2(MMC_VDD_23_24)] = 9, ++ [ilog2(MMC_VDD_24_25)] = 9, ++ [ilog2(MMC_VDD_25_26)] = 10, ++ [ilog2(MMC_VDD_26_27)] = 10, ++ [ilog2(MMC_VDD_27_28)] = 11, ++ [ilog2(MMC_VDD_28_29)] = 11, ++ [ilog2(MMC_VDD_29_30)] = 12, ++ [ilog2(MMC_VDD_30_31)] = 12, ++ [ilog2(MMC_VDD_31_32)] = 13, ++ [ilog2(MMC_VDD_32_33)] = 13, ++ [ilog2(MMC_VDD_33_34)] = 14, ++ [ilog2(MMC_VDD_34_35)] = 14, ++ [ilog2(MMC_VDD_35_36)] = 15, ++}; ++ ++static int a1200_mci_init(struct device *dev, ++ irqreturn_t (*ezx_detect_int)(int, void *), ++ void *data) ++{ ++ int err; ++ ++ /* Setup GPIO for PXA27x MMC/SD controller */ ++ pxa_gpio_mode(GPIO32_MMCCLK_MD); ++ pxa_gpio_mode(GPIO112_MMCCMD_MD); ++ pxa_gpio_mode(GPIO92_MMCDAT0_MD); ++ pxa_gpio_mode(GPIO109_MMCDAT1_MD); ++ pxa_gpio_mode(GPIO110_MMCDAT2_MD); ++ pxa_gpio_mode(GPIO111_MMCDAT3_MD); ++ ++ ezx_pcap_mmcsd_power(1); ++ ++ a1200_mci_platform_data.detect_delay = msecs_to_jiffies(250); ++ ++ err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED, ++ "MMC card detect", data); ++ if (err) { ++ printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request " ++ "MMC card detect IRQ\n"); ++ return -1; ++ } ++ ++ set_irq_type(0x0b, IRQT_BOTHEDGE); ++ ++ return 0; ++} ++ ++static void a1200_mci_setpower(struct device *dev, unsigned int vdd) ++{ ++ struct pxamci_platform_data* p_d = dev->platform_data; ++ ++ if (( 1 << vdd) & p_d->ocr_mask) ++ ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]); ++ ++ ezx_pcap_mmcsd_power(1); ++} ++ ++static void a1200_mci_exit(struct device *dev, void *data) ++{ ++ ezx_pcap_mmcsd_power(0); ++ free_irq(0x49, data); ++} ++ ++static struct pxamci_platform_data a1200_mci_platform_data = { ++ .ocr_mask = MMC_VDD_165_195|MMC_VDD_20_21|MMC_VDD_21_22 ++ |MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25 ++ |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 ++ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31 ++ |MMC_VDD_31_32|MMC_VDD_32_33|MMC_VDD_33_34 ++ |MMC_VDD_34_35|MMC_VDD_35_36, ++ .init = a1200_mci_init, ++ .setpower = a1200_mci_setpower, ++ .exit = a1200_mci_exit, ++}; ++ + static struct pxafb_mode_info mode_a1200 = { + .pixclock = 192308, + .xres = 240, +@@ -118,6 +210,7 @@ + static void __init a1200_init(void) + { + set_pxa_fb_info(&a1200_fb_info); ++ pxa_set_mci_info(&a1200_mci_platform_data); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + } diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-pcap.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-pcap.patch new file mode 100644 index 0000000000..8aa1e46d73 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a1200-pcap.patch @@ -0,0 +1,83 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:32:32.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-07 11:51:55.000000000 -0300 +@@ -19,6 +19,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -48,7 +49,70 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init a1200_pcap_init(void) ++{ ++ /* ++ * FIXME: this is the PCAP INITIAL STATE. ++ * most of these writes should NOT be done here ++ * * voltage regulators, voltage enablers should be set by the ++ * driver which uses the connected hardware. Otherwise you ++ * drain power unnecessarily. ++ * * interrupt related registers should be set by the irq functions ++ * only. I think that the INT_SEL register selects on which irq ++ * pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but ++ * only if it actually makes any difference. ++ * * Only power state automatic changes should be done here. ++ * (*LOWPWR, *STBY, LOWPWR*) ++ * * I removed some writes which i consider extremelly wrong. And ++ * which i think will not break anything (they were overwritten ++ * later anyway). ++ * ++ * --WM ++ */ ++ ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */ ++ ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */ ++ ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */ ++ ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c); ++ ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */ ++ ++ return 0; ++} ++ ++static struct pcap_platform_data a1200_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_CS_AH | PCAP_MCI_TF, ++ .clk = 1, ++ .init = a1200_pcap_init, ++}; ++ ++static struct resource a1200_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device a1200_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(a1200_pcap_resources), ++ .resource = a1200_pcap_resources, ++ .dev = { ++ .platform_data = &a1200_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &a1200_pcap_device, + }; + + static void __init a1200_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a1200-ts.patch b/packages/linux/linux-ezx-2.6.23/patches/a1200-ts.patch new file mode 100644 index 0000000000..bf328cd931 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a1200-ts.patch @@ -0,0 +1,39 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a1200.c 2007-09-25 02:00:40.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a1200.c 2007-09-25 02:00:53.000000000 -0300 +@@ -269,9 +269,34 @@ + }; + + ++/* PCAP_TS */ ++struct resource pcap_ts_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_ADCDONE, ++ .end = EZX_IRQ_ADCDONE, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_TS, ++ .end = EZX_IRQ_TS, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++struct platform_device pcap_ts_device = { ++ .name = "pcap-ts", ++ .id = -1, ++ .dev = { ++ .parent = &a1200_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(pcap_ts_resources), ++ .resource = pcap_ts_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a1200_pcap_device, + &a1200_eoc_device, ++ &pcap_ts_device, + }; + + static void __init a1200_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-emu.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-emu.patch new file mode 100644 index 0000000000..ae9237394d --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-emu.patch @@ -0,0 +1,38 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 23:03:48.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 23:04:03.000000000 +0200 +@@ -212,8 +212,33 @@ + }, + }; + ++/* EMU */ ++static struct resource a780_emu_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_USB4V, ++ .end = EZX_IRQ_USB4V, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_USB1V, ++ .end = EZX_IRQ_USB1V, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device a780_emu_device = { ++ .name = "ezx-emu", ++ .id = -1, ++ .dev = { ++ .parent = &a780_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(a780_emu_resources), ++ .resource = a780_emu_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, ++ &a780_emu_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-flip.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-flip.patch new file mode 100644 index 0000000000..44b97880ca --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-flip.patch @@ -0,0 +1,46 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:37:58.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:38:04.000000000 +0200 +@@ -18,6 +18,7 @@ + #include <linux/irq.h> + #include <linux/log2.h> + #include <linux/input.h> ++#include <linux/gpio_keys.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -312,10 +313,33 @@ + .resource = pcap_ts_resources, + }; + ++static struct gpio_keys_button a780flip_buttons[] = { ++ [0] = { ++ .code = KEY_SLEEP, ++ .gpio = GPIO_FLIP_PIN, ++ .desc = "A780 flip", ++ }, ++}; ++ ++static struct gpio_keys_platform_data a780flip_platform_data = { ++ .buttons = a780flip_buttons, ++ .nbuttons = 1, ++}; ++ ++static struct platform_device a780flip_device = { ++ .name = "gpio-keys", ++ .id = -1, ++ .dev = { ++ .platform_data = &a780flip_platform_data, ++ }, ++}; ++ ++ + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, + &pcap_ts_device, ++ &a780flip_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-kbd.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-kbd.patch new file mode 100644 index 0000000000..df60384b9c --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-kbd.patch @@ -0,0 +1,90 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:36:54.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:37:43.000000000 +0200 +@@ -17,6 +17,7 @@ + #include <linux/mmc/host.h> + #include <linux/irq.h> + #include <linux/log2.h> ++#include <linux/input.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -25,11 +26,13 @@ + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> + #include <asm/arch/mmc.h> ++#include <asm/arch/kbd.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); ++extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *); + + #ifdef CONFIG_EZX_PCAP + extern int ezx_pcap_mmcsd_power(int); +@@ -236,6 +239,55 @@ + .resource = a780_emu_resources, + }; + ++static unsigned char a780_keycode[] = { ++ /* row 0 */ ++ KEY_PHONE, KEY_MENU, KEY_CANCEL, KEY_PAGEUP, KEY_UP, ++ /* row 1 */ ++ KEY_KP1, KEY_KP2, KEY_KP3, KEY_ENTER, KEY_KPENTER, /*center joypad */ ++ /* row 2 */ ++ KEY_KP4, KEY_KP5, KEY_KP6, KEY_RECORD, KEY_LEFT, ++ /* row 3 */ ++ KEY_KP7, KEY_KP8, KEY_KP9, KEY_HOME, KEY_RIGHT, ++ /* row 4 */ ++ KEY_KPASTERISK, KEY_KP0, KEY_KPDOT, KEY_PAGEDOWN, KEY_DOWN, ++}; ++ ++static unsigned char a780_direct_keycode[] = { ++ KEY_CAMERA, ++}; ++ ++static int a780_kbd_init(void) ++{ ++ pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN); /* KP_DKIN<0>, voice_rec */ ++ pxa_gpio_mode(97 | GPIO_ALT_FN_3_IN); /* KP_MKIN<3> */ ++ pxa_gpio_mode(98 | GPIO_ALT_FN_3_IN); /* KP_MKIN<4> */ ++ pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN); /* KP_MKIN<0> */ ++ pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN); /* KP_MKIN<1> */ ++ pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN); /* KP_MKIN<2> */ ++ pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */ ++ pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */ ++ pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */ ++ pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */ ++ pxa_gpio_mode(107 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<4> */ ++ PKWR = 0xec400; ++ PGSR3 |= 0xf80; ++ return 0; ++} ++ ++static struct pxakbd_platform_data a780_kbd_platform_data = { ++ .init = &a780_kbd_init, ++ .scan_interval = HZ/40, ++ .matrix = { ++ .keycode = a780_keycode, ++ .cols = 5, ++ .rows = 5, ++ }, ++ .direct = { ++ .keycode = a780_direct_keycode, ++ .num = 1, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, +@@ -256,6 +308,7 @@ + + set_pxa_fb_info(&a780_fb_info); + pxa_set_mci_info(&a780_mci_platform_data); ++ pxa_set_kbd_info(&a780_kbd_platform_data); + + /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ + pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-leds.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-leds.patch new file mode 100644 index 0000000000..94aae070ae --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-leds.patch @@ -0,0 +1,187 @@ + +# +# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher +# + +Index: linux-2.6.23/drivers/leds/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/leds/Kconfig 2007-10-23 19:35:34.000000000 +0200 ++++ linux-2.6.23/drivers/leds/Kconfig 2007-10-23 19:38:13.000000000 +0200 +@@ -110,6 +110,13 @@ + These triggers allow kernel events to drive the LEDs and can + be configured via sysfs. If unsure, say Y. + ++config LEDS_A780 ++ tristate "LED Support for the Motorola A780 GSM Phone" ++ depends LEDS_CLASS && PXA_EZX_A780 ++ help ++ This option enables support for the LEDs on the ++ Motorola A780 GSM Phone. ++ + config LEDS_TRIGGER_TIMER + tristate "LED Timer Trigger" + depends on LEDS_TRIGGERS +Index: linux-2.6.23/drivers/leds/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/leds/Makefile 2007-10-23 19:35:34.000000000 +0200 ++++ linux-2.6.23/drivers/leds/Makefile 2007-10-23 19:38:13.000000000 +0200 +@@ -17,6 +17,7 @@ + obj-$(CONFIG_LEDS_H1940) += leds-h1940.o + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o + obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o ++obj-$(CONFIG_LEDS_A780) += leds-a780.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +Index: linux-2.6.23/drivers/leds/leds-a780.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/leds/leds-a780.c 2007-10-23 19:38:09.000000000 +0200 +@@ -0,0 +1,122 @@ ++/* ++ * EZX Platform LED Driver for the Motorola A780 GSM Phone ++ * ++ * Copyright 2006 Vanille-Media ++ * ++ * Author: Michael Lauer <mickey@Vanille.de> ++ * ++ * Based on keylight.c by Motorola and leds-corgi.c by Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/leds.h> ++#include <asm/arch/ezx-pcap.h> ++ ++static void a780led_main_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ if ( value > 31 ) value = 31; ++ printk( KERN_DEBUG "a780led_main_set: %d\n", value ); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL0, value & 0x01); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL1, value & 0x02); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL2, value & 0x04); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL3, value & 0x08); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL_CTRL4, value & 0x10); ++} ++ ++static void a780led_aux_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ if ( value > 31 ) value = 31; ++ printk( KERN_DEBUG "a780led_aux_set: %d\n", value ); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL0, value & 0x01); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL1, value & 0x02); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL2, value & 0x04); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL3, value & 0x08); ++ ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10); ++} ++ ++static struct led_classdev a780_main_led = { ++ .name = "a780:main", ++ .default_trigger = "none", ++ .brightness_set = a780led_main_set, ++}; ++ ++static struct led_classdev a780_aux_led = { ++ .name = "a780:aux", ++ .default_trigger = "none", ++ .brightness_set = a780led_aux_set, ++}; ++ ++#ifdef CONFIG_PM ++static int a780led_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ led_classdev_suspend(&a780_main_led); ++ led_classdev_suspend(&a780_aux_led); ++ return 0; ++} ++ ++static int a780led_resume(struct platform_device *dev) ++{ ++ led_classdev_resume(&a780_main_led); ++ led_classdev_resume(&a780_aux_led); ++ return 0; ++} ++#endif ++ ++static int a780led_probe(struct platform_device *pdev) ++{ ++ int ret; ++ ++ ret = led_classdev_register(&pdev->dev, &a780_main_led); ++ if (ret < 0) ++ return ret; ++ ++ ret = led_classdev_register(&pdev->dev, &a780_aux_led); ++ if (ret < 0) ++ led_classdev_unregister(&a780_main_led); ++ ++ return ret; ++} ++ ++static int a780led_remove(struct platform_device *pdev) ++{ ++ led_classdev_unregister(&a780_main_led); ++ led_classdev_unregister(&a780_aux_led); ++ return 0; ++} ++ ++static struct platform_driver a780led_driver = { ++ .probe = a780led_probe, ++ .remove = a780led_remove, ++#ifdef CONFIG_PM ++ .suspend = a780led_suspend, ++ .resume = a780led_resume, ++#endif ++ .driver = { ++ .name = "a780-led", ++ }, ++}; ++ ++static int __init a780led_init(void) ++{ ++ return platform_driver_register(&a780led_driver); ++} ++ ++static void __exit a780led_exit(void) ++{ ++ a780led_main_set( &a780_main_led, 0 ); ++ a780led_aux_set( &a780_aux_led, 0 ); ++ platform_driver_unregister(&a780led_driver); ++} ++ ++module_init(a780led_init); ++module_exit(a780led_exit); ++ ++MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>"); ++MODULE_DESCRIPTION("Motorola A780 LED driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:38:04.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:38:09.000000000 +0200 +@@ -334,12 +334,20 @@ + }, + }; + ++static struct platform_device a780led_device = { ++ .name = "a780-led", ++ .id = -1, ++ .dev = { ++ .parent = &a780_pcap_device.dev, ++ }, ++}; + + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, + &pcap_ts_device, + &a780flip_device, ++ &a780led_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-mci.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-mci.patch new file mode 100644 index 0000000000..1e427b33f9 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-mci.patch @@ -0,0 +1,125 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 12:38:08.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 12:44:42.000000000 +0200 +@@ -14,6 +14,9 @@ + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/fb.h> ++#include <linux/mmc/host.h> ++#include <linux/irq.h> ++#include <linux/log2.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -21,12 +24,102 @@ + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> ++#include <asm/arch/mmc.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); + ++#ifdef CONFIG_EZX_PCAP ++extern int ezx_pcap_mmcsd_power(int); ++extern void ezx_pcap_mmcsd_voltage(u_int32_t); ++#else ++#define ezx_pcap_mmcsd_voltage(x) {} ++#define ezx_pcap_mmcsd_power(x) {} ++#endif ++ ++static struct pxamci_platform_data a780_mci_platform_data; ++ ++static u_int8_t mmc_voltage[] = { ++ [ilog2(MMC_VDD_165_195)] = 6, ++ [ilog2(MMC_VDD_20_21)] = 7, ++ [ilog2(MMC_VDD_21_22)] = 8, ++ [ilog2(MMC_VDD_22_23)] = 8, ++ [ilog2(MMC_VDD_23_24)] = 9, ++ [ilog2(MMC_VDD_24_25)] = 9, ++ [ilog2(MMC_VDD_25_26)] = 10, ++ [ilog2(MMC_VDD_26_27)] = 10, ++ [ilog2(MMC_VDD_27_28)] = 11, ++ [ilog2(MMC_VDD_28_29)] = 11, ++ [ilog2(MMC_VDD_29_30)] = 12, ++ [ilog2(MMC_VDD_30_31)] = 12, ++ [ilog2(MMC_VDD_31_32)] = 13, ++ [ilog2(MMC_VDD_32_33)] = 13, ++ [ilog2(MMC_VDD_33_34)] = 14, ++ [ilog2(MMC_VDD_34_35)] = 14, ++ [ilog2(MMC_VDD_35_36)] = 15, ++}; ++ ++static int a780_mci_init(struct device *dev, ++ irqreturn_t (*ezx_detect_int)(int, void *), ++ void *data) ++{ ++ int err; ++ ++ /* Setup GPIO for PXA27x MMC/SD controller */ ++ pxa_gpio_mode(GPIO32_MMCCLK_MD); ++ pxa_gpio_mode(GPIO112_MMCCMD_MD); ++ pxa_gpio_mode(GPIO92_MMCDAT0_MD); ++ pxa_gpio_mode(GPIO109_MMCDAT1_MD); ++ pxa_gpio_mode(GPIO110_MMCDAT2_MD); ++ pxa_gpio_mode(GPIO111_MMCDAT3_MD); ++ ++ ezx_pcap_mmcsd_power(1); ++ ++ a780_mci_platform_data.detect_delay = msecs_to_jiffies(250); ++ ++ err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED, ++ "MMC card detect", data); ++ if (err) { ++ printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request " ++ "MMC card detect IRQ\n"); ++ return -1; ++ } ++ ++ set_irq_type(0x0b, IRQT_BOTHEDGE); ++ ++ return 0; ++} ++ ++static void a780_mci_setpower(struct device *dev, unsigned int vdd) ++{ ++ struct pxamci_platform_data* p_d = dev->platform_data; ++ ++ if (( 1 << vdd) & p_d->ocr_mask) ++ ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]); ++ ++ ezx_pcap_mmcsd_power(1); ++} ++ ++static void a780_mci_exit(struct device *dev, void *data) ++{ ++ ezx_pcap_mmcsd_power(0); ++ free_irq(0x49, data); ++} ++ ++static struct pxamci_platform_data a780_mci_platform_data = { ++ .ocr_mask = MMC_VDD_165_195|MMC_VDD_20_21|MMC_VDD_21_22 ++ |MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25 ++ |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 ++ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31 ++ |MMC_VDD_31_32|MMC_VDD_32_33|MMC_VDD_33_34 ++ |MMC_VDD_34_35|MMC_VDD_35_36, ++ .init = a780_mci_init, ++ .setpower = a780_mci_setpower, ++ .exit = a780_mci_exit, ++}; ++ + static struct pxafb_mode_info mode_a780 = { + .pixclock = 150000, + .xres = 240, +@@ -137,6 +230,7 @@ + PSLR = 0x05800f00; + + set_pxa_fb_info(&a780_fb_info); ++ pxa_set_mci_info(&a780_mci_platform_data); + + /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ + pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-pcap.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-pcap.patch new file mode 100644 index 0000000000..afb5d9c005 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-pcap.patch @@ -0,0 +1,90 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 22:33:03.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-a780.c 2007-08-31 23:01:17.000000000 -0300 +@@ -20,6 +20,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -49,7 +50,77 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init a780_pcap_init(void) ++{ ++ /* initialize PCAP registers */ ++ /* set SW1 sleep to keep SW1 1.3v in sync mode */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0); ++ ++ /* SW1 active in sync mode */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0); ++ ++ /* at SW1 -core voltage to 1.30V */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0); ++ ++ /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0); ++ ++ /* ++ * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- ++ * camera for e680 ++ */ ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0); ++ ++ /* set Vc to low power mode when AP sleep */ ++// SSP_PCAP_bit_set(PCAP_BIT_LOWPWR_CTRL_VC_STBY); ++ ++ /* set VAUX2 to low power mode when AP sleep */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1); ++ ++ return 0; ++} ++ ++static struct pcap_platform_data a780_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_MCI_TF, ++ .clk = 1, ++ .init = a780_pcap_init, ++}; ++ ++static struct resource a780_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device a780_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(a780_pcap_resources), ++ .resource = a780_pcap_resources, ++ .dev = { ++ .platform_data = &a780_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &a780_pcap_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-ts.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-ts.patch new file mode 100644 index 0000000000..e1dd6ca5c6 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-ts.patch @@ -0,0 +1,39 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:37:43.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-23 19:37:58.000000000 +0200 +@@ -288,9 +288,34 @@ + }, + }; + ++/* PCAP_TS */ ++struct resource pcap_ts_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_ADCDONE2, ++ .end = EZX_IRQ_ADCDONE2, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_TS, ++ .end = EZX_IRQ_TS, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++struct platform_device pcap_ts_device = { ++ .name = "pcap-ts", ++ .id = -1, ++ .dev = { ++ .parent = &a780_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(pcap_ts_resources), ++ .resource = pcap_ts_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &a780_pcap_device, + &a780_emu_device, ++ &pcap_ts_device, + }; + + static void __init a780_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/a780-vibrator.patch b/packages/linux/linux-ezx-2.6.23/patches/a780-vibrator.patch new file mode 100644 index 0000000000..f9fe614af6 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/a780-vibrator.patch @@ -0,0 +1,102 @@ +Index: linux-2.6.23/drivers/leds/leds-a780.c +=================================================================== +--- linux-2.6.23.orig/drivers/leds/leds-a780.c 2007-10-22 22:26:07.000000000 +0200 ++++ linux-2.6.23/drivers/leds/leds-a780.c 2007-10-22 22:26:46.000000000 +0200 +@@ -40,6 +40,17 @@ + ezx_pcap_bit_set(PCAP_BIT_PERIPH_BL2_CTRL4, value & 0x10); + } + ++static void a780vibrator_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ if (value > 4) value = 4; ++ printk( KERN_DEBUG "a780vibrator_set: %d\n", value ); ++ ezx_pcap_vibrator_level(value-1); ++ if (value == 0) ++ ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 0); ++ else ++ ezx_pcap_bit_set(PCAP_BIT_AUXVREG_V_VIB_EN, 1); ++} ++ + static struct led_classdev a780_main_led = { + .name = "a780:main", + .default_trigger = "none", +@@ -52,11 +63,18 @@ + .brightness_set = a780led_aux_set, + }; + ++static struct led_classdev a780_vibrator = { ++ .name = "a780:vibrator", ++ .default_trigger = "none", ++ .brightness_set = a780vibrator_set, ++}; ++ + #ifdef CONFIG_PM + static int a780led_suspend(struct platform_device *dev, pm_message_t state) + { + led_classdev_suspend(&a780_main_led); + led_classdev_suspend(&a780_aux_led); ++ led_classdev_suspend(&a780_vibrator); + return 0; + } + +@@ -64,6 +82,7 @@ + { + led_classdev_resume(&a780_main_led); + led_classdev_resume(&a780_aux_led); ++ led_classdev_resume(&a780_vibrator); + return 0; + } + #endif +@@ -77,8 +96,16 @@ + return ret; + + ret = led_classdev_register(&pdev->dev, &a780_aux_led); +- if (ret < 0) ++ if (ret < 0) { ++ led_classdev_unregister(&a780_main_led); ++ return ret; ++ } ++ ++ ret = led_classdev_register(&pdev->dev, &a780_vibrator); ++ if (ret < 0) { + led_classdev_unregister(&a780_main_led); ++ led_classdev_unregister(&a780_aux_led); ++ } + + return ret; + } +@@ -87,6 +114,7 @@ + { + led_classdev_unregister(&a780_main_led); + led_classdev_unregister(&a780_aux_led); ++ led_classdev_unregister(&a780_vibrator); + return 0; + } + +@@ -111,6 +139,7 @@ + { + a780led_main_set( &a780_main_led, 0 ); + a780led_aux_set( &a780_aux_led, 0 ); ++ a780vibrator_set( &a780_vibrator, 0 ); + platform_driver_unregister(&a780led_driver); + } + +Index: linux-2.6.23/drivers/leds/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/leds/Kconfig 2007-10-22 22:26:42.000000000 +0200 ++++ linux-2.6.23/drivers/leds/Kconfig 2007-10-22 22:26:46.000000000 +0200 +@@ -111,11 +111,11 @@ + be configured via sysfs. If unsure, say Y. + + config LEDS_A780 +- tristate "LED Support for the Motorola A780 GSM Phone" ++ tristate "LED/Vibrator Support for the Motorola A780 GSM Phone" + depends LEDS_CLASS && PXA_EZX_A780 + help +- This option enables support for the LEDs on the +- Motorola A780 GSM Phone. ++ This option enables support for the LEDs and the ++ vibrator on the Motorola A780 GSM Phone. + + config LEDS_E680 + tristate "LED Support for the Motorola E680(i) GSM Phone" diff --git a/packages/linux/linux-ezx-2.6.23/patches/asoc-fix-loopback.patch b/packages/linux/linux-ezx-2.6.23/patches/asoc-fix-loopback.patch new file mode 100644 index 0000000000..feea138984 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/asoc-fix-loopback.patch @@ -0,0 +1,14 @@ +Index: linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c +=================================================================== +--- linux-2.6.21.orig/sound/soc/pxa/pxa2xx-pcm.c 2007-09-02 22:30:56.000000000 -0300 ++++ linux-2.6.21/sound/soc/pxa/pxa2xx-pcm.c 2007-09-02 22:36:26.000000000 -0300 +@@ -153,7 +153,8 @@ + static int pxa2xx_pcm_prepare(struct snd_pcm_substream *substream) + { + struct pxa2xx_runtime_data *prtd = substream->runtime->private_data; +- ++ /* no dma if on loopback */ ++ if (!prtd->params) return 0; + DCSR(prtd->dma_ch) &= ~DCSR_RUN; + DCSR(prtd->dma_ch) = 0; + DCMD(prtd->dma_ch) = 0; diff --git a/packages/linux/linux-ezx-2.6.23/patches/asoc-pxa-ssp.patch b/packages/linux/linux-ezx-2.6.23/patches/asoc-pxa-ssp.patch new file mode 100644 index 0000000000..e53b61c352 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/asoc-pxa-ssp.patch @@ -0,0 +1,755 @@ +Index: linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.c 2007-10-22 22:27:11.000000000 +0200 +@@ -0,0 +1,671 @@ ++/* ++ * pxa2xx-ssp.c -- ALSA Soc Audio Layer ++ * ++ * Copyright 2005 Wolfson Microelectronics PLC. ++ * Author: Liam Girdwood ++ * liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * Revision history ++ * 12th Aug 2005 Initial version. ++ * ++ * TODO: ++ * o The SSP driver _mostly_ works, however is in need of testing and ++ * someone with time to complete it. ++ * o Test network mode for > 16bit sample size ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/initval.h> ++#include <sound/pcm_params.h> ++#include <sound/soc.h> ++ ++#include <asm/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/audio.h> ++#include <asm/arch/ssp.h> ++ ++#include "pxa2xx-pcm.h" ++#include "pxa2xx-ssp.h" ++ ++#define PXA_SSP_DEBUG 0 ++ ++/* ++ * The following should be defined in pxa-regs.h ++ */ ++#define SSCR0_ACS (1 << 30) /* Audio Clock Select */ ++#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass (SSCR0[ACS] must be set) */ ++#define SSACD_ACPS(x) (x << 4) /* Audio clock PLL select */ ++#define SSACD_ACDS(x) (x << 0) /* Audio clock divider select */ ++ ++/* ++ * SSP audio private data ++ */ ++struct ssp_priv { ++ unsigned int sysclk; ++}; ++ ++static struct ssp_priv ssp_clk[3]; ++static struct ssp_dev ssp[3]; ++#ifdef CONFIG_PM ++static struct ssp_state ssp_state[3]; ++#endif ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_mono_out = { ++ .name = "SSP1 PCM Mono out", ++ .dev_addr = __PREG(SSDR_P1), ++ .drcmr = &DRCMRTXSSDR, ++ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | ++ DCMD_BURST16 | DCMD_WIDTH2, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_mono_in = { ++ .name = "SSP1 PCM Mono in", ++ .dev_addr = __PREG(SSDR_P1), ++ .drcmr = &DRCMRRXSSDR, ++ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | ++ DCMD_BURST16 | DCMD_WIDTH2, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_stereo_out = { ++ .name = "SSP1 PCM Stereo out", ++ .dev_addr = __PREG(SSDR_P1), ++ .drcmr = &DRCMRTXSSDR, ++ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | ++ DCMD_BURST16 | DCMD_WIDTH4, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp1_pcm_stereo_in = { ++ .name = "SSP1 PCM Stereo in", ++ .dev_addr = __PREG(SSDR_P1), ++ .drcmr = &DRCMRRXSSDR, ++ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | ++ DCMD_BURST16 | DCMD_WIDTH4, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_mono_out = { ++ .name = "SSP2 PCM Mono out", ++ .dev_addr = __PREG(SSDR_P2), ++ .drcmr = &DRCMRTXSS2DR, ++ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | ++ DCMD_BURST16 | DCMD_WIDTH2, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_mono_in = { ++ .name = "SSP2 PCM Mono in", ++ .dev_addr = __PREG(SSDR_P2), ++ .drcmr = &DRCMRRXSS2DR, ++ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | ++ DCMD_BURST16 | DCMD_WIDTH2, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_stereo_out = { ++ .name = "SSP2 PCM Stereo out", ++ .dev_addr = __PREG(SSDR_P2), ++ .drcmr = &DRCMRTXSS2DR, ++ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | ++ DCMD_BURST16 | DCMD_WIDTH4, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp2_pcm_stereo_in = { ++ .name = "SSP2 PCM Stereo in", ++ .dev_addr = __PREG(SSDR_P2), ++ .drcmr = &DRCMRRXSS2DR, ++ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | ++ DCMD_BURST16 | DCMD_WIDTH4, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_mono_out = { ++ .name = "SSP3 PCM Mono out", ++ .dev_addr = __PREG(SSDR_P3), ++ .drcmr = &DRCMRTXSS3DR, ++ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | ++ DCMD_BURST16 | DCMD_WIDTH2, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_mono_in = { ++ .name = "SSP3 PCM Mono in", ++ .dev_addr = __PREG(SSDR_P3), ++ .drcmr = &DRCMRRXSS3DR, ++ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | ++ DCMD_BURST16 | DCMD_WIDTH2, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_stereo_out = { ++ .name = "SSP3 PCM Stereo out", ++ .dev_addr = __PREG(SSDR_P3), ++ .drcmr = &DRCMRTXSS3DR, ++ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | ++ DCMD_BURST16 | DCMD_WIDTH4, ++}; ++ ++static struct pxa2xx_pcm_dma_params pxa2xx_ssp3_pcm_stereo_in = { ++ .name = "SSP3 PCM Stereo in", ++ .dev_addr = __PREG(SSDR_P3), ++ .drcmr = &DRCMRRXSS3DR, ++ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | ++ DCMD_BURST16 | DCMD_WIDTH4, ++}; ++ ++static struct pxa2xx_pcm_dma_params *ssp_dma_params[3][4] = { ++ {&pxa2xx_ssp1_pcm_mono_out, &pxa2xx_ssp1_pcm_mono_in, ++ &pxa2xx_ssp1_pcm_stereo_out,&pxa2xx_ssp1_pcm_stereo_in,}, ++ {&pxa2xx_ssp2_pcm_mono_out, &pxa2xx_ssp2_pcm_mono_in, ++ &pxa2xx_ssp2_pcm_stereo_out, &pxa2xx_ssp2_pcm_stereo_in,}, ++ {&pxa2xx_ssp3_pcm_mono_out, &pxa2xx_ssp3_pcm_mono_in, ++ &pxa2xx_ssp3_pcm_stereo_out,&pxa2xx_ssp3_pcm_stereo_in,}, ++}; ++ ++static int pxa2xx_ssp_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret = 0; ++ ++ if (!rtd->dai->cpu_dai->active) { ++ ret = ssp_init (&ssp[cpu_dai->id], cpu_dai->id + 1, ++ SSP_NO_IRQ); ++ if (ret < 0) ++ return ret; ++ ssp_disable(&ssp[cpu_dai->id]); ++ } ++ return ret; ++} ++ ++static void pxa2xx_ssp_shutdown(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ ++ if (!cpu_dai->active) { ++ ssp_disable(&ssp[cpu_dai->id]); ++ ssp_exit(&ssp[cpu_dai->id]); ++ } ++} ++ ++#if defined (CONFIG_PXA27x) ++static int cken[3] = {CKEN_SSP1, CKEN_SSP2, CKEN_SSP3}; ++#else ++static int cken[3] = {CKEN_SSP, CKEN_NSSP, CKEN_ASSP}; ++#endif ++ ++#ifdef CONFIG_PM ++ ++static int pxa2xx_ssp_suspend(struct platform_device *pdev, ++ struct snd_soc_cpu_dai *dai) ++{ ++ if (!dai->active) ++ return 0; ++ ++ ssp_save_state(&ssp[dai->id], &ssp_state[dai->id]); ++ pxa_set_cken(cken[dai->id], 0); ++ return 0; ++} ++ ++static int pxa2xx_ssp_resume(struct platform_device *pdev, ++ struct snd_soc_cpu_dai *dai) ++{ ++ if (!dai->active) ++ return 0; ++ ++ pxa_set_cken(cken[dai->id], 1); ++ ssp_restore_state(&ssp[dai->id], &ssp_state[dai->id]); ++ ssp_enable(&ssp[dai->id]); ++ ++ return 0; ++} ++ ++#else ++#define pxa2xx_ssp_suspend NULL ++#define pxa2xx_ssp_resume NULL ++#endif ++ ++/* ++ * Set the SSP ports SYSCLK. ++ */ ++static int pxa2xx_ssp_set_dai_sysclk(struct snd_soc_cpu_dai *cpu_dai, ++ int clk_id, unsigned int freq, int dir) ++{ ++ int port = cpu_dai->id + 1; ++ u32 sscr0 = SSCR0_P(port) & ++ ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); ++ ++ switch (clk_id) { ++ case PXA2XX_SSP_CLK_PLL: ++ /* Internal PLL is fixed on pxa25x and pxa27x */ ++#ifdef CONFIG_PXA27x ++ ssp_clk[cpu_dai->id].sysclk = 13000000; ++#else ++ ssp_clk[cpu_dai->id].sysclk = 1843200; ++#endif ++ break; ++ case PXA2XX_SSP_CLK_EXT: ++ ssp_clk[cpu_dai->id].sysclk = freq; ++ sscr0 |= SSCR0_ECS; ++ break; ++ case PXA2XX_SSP_CLK_NET: ++ ssp_clk[cpu_dai->id].sysclk = freq; ++ sscr0 |= SSCR0_NCS | SSCR0_MOD; ++ break; ++ case PXA2XX_SSP_CLK_AUDIO: ++ ssp_clk[cpu_dai->id].sysclk = 0; ++ SSCR0_P(port) |= SSCR0_SerClkDiv(1); ++ sscr0 |= SSCR0_ACS; ++ break; ++ default: ++ return -ENODEV; ++ } ++ ++ /* the SSP CKEN clock must be disabled when changing SSP clock mode */ ++ pxa_set_cken(cken[cpu_dai->id], 0); ++ SSCR0_P(port) |= sscr0; ++ pxa_set_cken(cken[cpu_dai->id], 1); ++ return 0; ++} ++ ++/* ++ * Set the SSP clock dividers. ++ */ ++static int pxa2xx_ssp_set_dai_clkdiv(struct snd_soc_cpu_dai *cpu_dai, ++ int div_id, int div) ++{ ++ int port = cpu_dai->id + 1; ++ ++ switch (div_id) { ++ case PXA2XX_SSP_AUDIO_DIV_ACDS: ++ SSACD_P(port) &= ~ 0x7; ++ SSACD_P(port) |= SSACD_ACDS(div); ++ break; ++ case PXA2XX_SSP_AUDIO_DIV_SCDB: ++ SSACD_P(port) &= ~0x8; ++ if (div == PXA2XX_SSP_CLK_SCDB_1) ++ SSACD_P(port) |= SSACD_SCDB; ++ break; ++ case PXA2XX_SSP_DIV_SCR: ++ SSCR0_P(port) &= ~SSCR0_SCR; ++ SSCR0_P(port) |= SSCR0_SerClkDiv(div); ++ break; ++ default: ++ return -ENODEV; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Configure the PLL frequency pxa27x and (afaik - pxa320 only) ++ */ ++static int pxa2xx_ssp_set_dai_pll(struct snd_soc_cpu_dai *cpu_dai, ++ int pll_id, unsigned int freq_in, unsigned int freq_out) ++{ ++ int port = cpu_dai->id + 1; ++ ++ SSACD_P(port) &= ~0x70; ++ switch (freq_out) { ++ case 5622000: ++ break; ++ case 11345000: ++ SSACD_P(port) |= (0x1 << 4); ++ break; ++ case 12235000: ++ SSACD_P(port) |= (0x2 << 4); ++ break; ++ case 14857000: ++ SSACD_P(port) |= (0x3 << 4); ++ break; ++ case 32842000: ++ SSACD_P(port) |= (0x4 << 4); ++ break; ++ case 48000000: ++ SSACD_P(port) |= (0x5 << 4); ++ break; ++ } ++ return 0; ++} ++ ++/* ++ * Set the active slots in TDM/Network mode ++ */ ++static int pxa2xx_ssp_set_dai_tdm_slot(struct snd_soc_cpu_dai *cpu_dai, ++ unsigned int mask, int slots) ++{ ++ int port = cpu_dai->id + 1; ++ ++ SSCR0_P(port) &= ~SSCR0_SlotsPerFrm(7); ++ ++ /* set number of active slots */ ++ SSCR0_P(port) |= SSCR0_SlotsPerFrm(slots); ++ ++ /* set active slot mask */ ++ SSTSA_P(port) = mask; ++ SSRSA_P(port) = mask; ++ return 0; ++} ++ ++/* ++ * Tristate the SSP DAI lines ++ */ ++static int pxa2xx_ssp_set_dai_tristate(struct snd_soc_cpu_dai *cpu_dai, ++ int tristate) ++{ ++ int port = cpu_dai->id + 1; ++ ++ if (tristate) ++ SSCR1_P(port) &= ~SSCR1_TTE; ++ else ++ SSCR1_P(port) |= SSCR1_TTE; ++ ++ return 0; ++} ++ ++/* ++ * Set up the SSP DAI format. ++ * The SSP Port must be inactive before calling this function as the ++ * physical interface format is changed. ++ */ ++static int pxa2xx_ssp_set_dai_fmt(struct snd_soc_cpu_dai *cpu_dai, ++ unsigned int fmt) ++{ ++ int port = cpu_dai->id + 1; ++ ++ /* reset port settings */ ++ SSCR0_P(port) = 0; ++ SSCR1_P(port) = 0; ++ SSPSP_P(port) = 0; ++ ++ /* NOTE: I2S emulation is still very much work in progress here */ ++ ++ /* FIXME: this is what wince uses for msb */ ++ if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_MSB) { ++ SSCR0_P(port) = SSCR0_EDSS | SSCR0_TISSP | SSCR0_DataSize(16); ++ ++// SSCR1_P(port) = SSCR1_RxTresh(8) | SSCR1_TxTresh(8); /* doesn't seem to be needed */ ++ return 0; ++ } ++ ++ /* check for I2S emulation mode - handle it separately */ ++ if (((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) || ++ ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_MSB)) { ++ /* 8.4.11 */ ++ ++ /* Only SSCR0[NCS] or SSCR0[ECS] bit fields settings are optional */ ++ SSCR0_P(port) = SSCR0_EDSS | SSCR0_PSP | SSCR0_DataSize(16); ++ ++ /* SSCR1 = 0x203C3C03 */ ++ /* SSCR1[SCLKDIR] and SSCR1[SFRMDIR] must be cleared (master only ???), ++ * all other bit fields settings are optional. */ ++ //SSCR1_P(port) &= ~(SSCR1_SCLKDIR | SSCR1_SFRMDIR); ++ ++ /* set FIFO thresholds */ ++ SSCR1_P(port) = SSCR1_RxTresh(14) | SSCR1_TxTresh(1); ++ ++ /* normal: */ ++ /* all bit fields must be cleared except: FSRT = 1 and ++ * SFRMWDTH = 16, DMYSTART=0,1) */ ++ SSPSP_P(port) = SSPSP_FSRT | SSPSP_SFRMWDTH(16) | SSPSP_DMYSTRT(0); ++ return 0; ++ } ++ ++ SSCR0_P(port) |= SSCR0_PSP; ++ SSCR1_P(port) = SSCR1_RxTresh(14) | SSCR1_TxTresh(1) | ++ SSCR1_TRAIL | SSCR1_RWOT; ++ ++ switch(fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBM_CFM: ++ SSCR1_P(port) |= (SSCR1_SCLKDIR | SSCR1_SFRMDIR); ++ break; ++ case SND_SOC_DAIFMT_CBM_CFS: ++ SSCR1_P(port) |= SSCR1_SCLKDIR; ++ break; ++ case SND_SOC_DAIFMT_CBS_CFM: ++ SSCR1_P(port) |= SSCR1_SFRMDIR; ++ break; ++ case SND_SOC_DAIFMT_CBS_CFS: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_NB_NF: ++ SSPSP_P(port) |= SSPSP_SFRMP | SSPSP_FSRT; ++ break; ++ case SND_SOC_DAIFMT_IB_IF: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_DSP_A: ++ SSPSP_P(port) |= SSPSP_DMYSTRT(1); ++ case SND_SOC_DAIFMT_DSP_B: ++ SSPSP_P(port) |= SSPSP_SCMODE(2); ++ break; ++ case SND_SOC_DAIFMT_I2S: ++ case SND_SOC_DAIFMT_MSB: ++ /* handled above */ ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++/* ++ * Set the SSP audio DMA parameters and sample size. ++ * Can be called multiple times by oss emulation. ++ */ ++static int pxa2xx_ssp_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int dma = 0, chn = params_channels(params); ++ int port = cpu_dai->id + 1; ++ ++ /* select correct DMA params */ ++ if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) ++ dma = 1; /* capture DMA offset is 1,3 */ ++ if (chn == 2) ++ dma += 2; /* stereo DMA offset is 2, mono is 0 */ ++ cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma]; ++ ++ /* we can only change the settings if the port is not in use */ ++ if (SSCR0_P(port) & SSCR0_SSE) ++ return 0; ++ ++ /* clear selected SSP bits */ ++ SSCR0_P(port) &= ~(SSCR0_DSS | SSCR0_EDSS); ++ ++ /* bit size */ ++ switch(params_format(params)) { ++ case SNDRV_PCM_FORMAT_S16_LE: ++ SSCR0_P(port) |= SSCR0_DataSize(16); ++ break; ++ case SNDRV_PCM_FORMAT_S24_LE: ++ SSCR0_P(port) |=(SSCR0_EDSS | SSCR0_DataSize(8)); ++ /* we must be in network mode (2 slots) for 24 bit stereo */ ++ break; ++ case SNDRV_PCM_FORMAT_S32_LE: ++ SSCR0_P(port) |= (SSCR0_EDSS | SSCR0_DataSize(16)); ++ /* we must be in network mode (2 slots) for 32 bit stereo */ ++ break; ++ } ++ ++#if PXA_SSP_DEBUG ++ printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x SSACD %x\n", ++ SSCR0_P(port), SSCR1_P(port), ++ SSTO_P(port), SSPSP_P(port), ++ SSSR_P(port), SSACD_P(port)); ++#endif ++ return 0; ++} ++ ++static int pxa2xx_ssp_trigger(struct snd_pcm_substream *substream, int cmd) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret = 0; ++ int port = cpu_dai->id + 1; ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_RESUME: ++ ssp_enable(&ssp[cpu_dai->id]); ++ break; ++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ SSCR1_P(port) |= SSCR1_TSRE; ++ else ++ SSCR1_P(port) |= SSCR1_RSRE; ++ SSSR_P(port) |= SSSR_P(port); ++ break; ++ case SNDRV_PCM_TRIGGER_START: ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ SSCR1_P(port) |= SSCR1_TSRE; ++ else ++ SSCR1_P(port) |= SSCR1_RSRE; ++ ssp_enable(&ssp[cpu_dai->id]); ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ SSCR1_P(port) &= ~SSCR1_TSRE; ++ else ++ SSCR1_P(port) &= ~SSCR1_RSRE; ++ break; ++ case SNDRV_PCM_TRIGGER_SUSPEND: ++ ssp_disable(&ssp[cpu_dai->id]); ++ break; ++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ SSCR1_P(port) &= ~SSCR1_TSRE; ++ else ++ SSCR1_P(port) &= ~SSCR1_RSRE; ++ break; ++ ++ default: ++ ret = -EINVAL; ++ } ++#if PXA_SSP_DEBUG ++ printk("trig cmd %d\n", cmd); ++ printk("SSCR0 %x SSCR1 %x SSTO %x SSPSP %x SSSR %x\n", ++ SSCR0_P(port), SSCR1_P(port), ++ SSTO_P(port), SSPSP_P(port), ++ SSSR_P(port)); ++#endif ++ return ret; ++} ++ ++#define PXA2XX_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ ++ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \ ++ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) ++ ++#define PXA2XX_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ ++ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) ++ ++struct snd_soc_cpu_dai pxa_ssp_dai[] = { ++ { .name = "pxa2xx-ssp1", ++ .id = 0, ++ .type = SND_SOC_DAI_PCM, ++ .suspend = pxa2xx_ssp_suspend, ++ .resume = pxa2xx_ssp_resume, ++ .playback = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = PXA2XX_SSP_RATES, ++ .formats = PXA2XX_SSP_FORMATS,}, ++ .capture = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = PXA2XX_SSP_RATES, ++ .formats = PXA2XX_SSP_FORMATS,}, ++ .ops = { ++ .startup = pxa2xx_ssp_startup, ++ .shutdown = pxa2xx_ssp_shutdown, ++ .trigger = pxa2xx_ssp_trigger, ++ .hw_params = pxa2xx_ssp_hw_params,}, ++ .dai_ops = { ++ .set_sysclk = pxa2xx_ssp_set_dai_sysclk, ++ .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv, ++ .set_pll = pxa2xx_ssp_set_dai_pll, ++ .set_fmt = pxa2xx_ssp_set_dai_fmt, ++ .set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot, ++ .set_tristate = pxa2xx_ssp_set_dai_tristate, ++ }, ++ }, ++ { .name = "pxa2xx-ssp2", ++ .id = 1, ++ .type = SND_SOC_DAI_PCM, ++ .suspend = pxa2xx_ssp_suspend, ++ .resume = pxa2xx_ssp_resume, ++ .playback = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = PXA2XX_SSP_RATES, ++ .formats = PXA2XX_SSP_FORMATS,}, ++ .capture = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = PXA2XX_SSP_RATES, ++ .formats = PXA2XX_SSP_FORMATS,}, ++ .ops = { ++ .startup = pxa2xx_ssp_startup, ++ .shutdown = pxa2xx_ssp_shutdown, ++ .trigger = pxa2xx_ssp_trigger, ++ .hw_params = pxa2xx_ssp_hw_params,}, ++ .dai_ops = { ++ .set_sysclk = pxa2xx_ssp_set_dai_sysclk, ++ .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv, ++ .set_pll = pxa2xx_ssp_set_dai_pll, ++ .set_fmt = pxa2xx_ssp_set_dai_fmt, ++ .set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot, ++ .set_tristate = pxa2xx_ssp_set_dai_tristate, ++ }, ++ }, ++ { .name = "pxa2xx-ssp3", ++ .id = 2, ++ .type = SND_SOC_DAI_PCM, ++ .suspend = pxa2xx_ssp_suspend, ++ .resume = pxa2xx_ssp_resume, ++ .playback = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = PXA2XX_SSP_RATES, ++ .formats = PXA2XX_SSP_FORMATS,}, ++ .capture = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = PXA2XX_SSP_RATES, ++ .formats = PXA2XX_SSP_FORMATS,}, ++ .ops = { ++ .startup = pxa2xx_ssp_startup, ++ .shutdown = pxa2xx_ssp_shutdown, ++ .trigger = pxa2xx_ssp_trigger, ++ .hw_params = pxa2xx_ssp_hw_params,}, ++ .dai_ops = { ++ .set_sysclk = pxa2xx_ssp_set_dai_sysclk, ++ .set_clkdiv = pxa2xx_ssp_set_dai_clkdiv, ++ .set_pll = pxa2xx_ssp_set_dai_pll, ++ .set_fmt = pxa2xx_ssp_set_dai_fmt, ++ .set_tdm_slot = pxa2xx_ssp_set_dai_tdm_slot, ++ .set_tristate = pxa2xx_ssp_set_dai_tristate, ++ }, ++ }, ++}; ++EXPORT_SYMBOL_GPL(pxa_ssp_dai); ++ ++/* Module information */ ++MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com"); ++MODULE_DESCRIPTION("pxa2xx SSP/PCM SoC Interface"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/sound/soc/pxa/pxa2xx-ssp.h 2007-10-22 22:27:11.000000000 +0200 +@@ -0,0 +1,42 @@ ++/* ++ * linux/sound/arm/pxa2xx-ssp.h ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _PXA2XX_SSP_H ++#define _PXA2XX_SSP_H ++ ++/* pxa2xx DAI SSP ID's */ ++#define PXA2XX_DAI_SSP1 0 ++#define PXA2XX_DAI_SSP2 1 ++#define PXA2XX_DAI_SSP3 2 ++ ++/* SSP clock sources */ ++#define PXA2XX_SSP_CLK_PLL 0 ++#define PXA2XX_SSP_CLK_EXT 1 ++#define PXA2XX_SSP_CLK_NET 2 ++#define PXA2XX_SSP_CLK_AUDIO 3 ++ ++/* SSP audio dividers */ ++#define PXA2XX_SSP_AUDIO_DIV_ACDS 0 ++#define PXA2XX_SSP_AUDIO_DIV_SCDB 1 ++#define PXA2XX_SSP_DIV_SCR 2 ++ ++/* SSP ACDS audio dividers values */ ++#define PXA2XX_SSP_CLK_AUDIO_DIV_1 0 ++#define PXA2XX_SSP_CLK_AUDIO_DIV_2 1 ++#define PXA2XX_SSP_CLK_AUDIO_DIV_4 2 ++#define PXA2XX_SSP_CLK_AUDIO_DIV_8 3 ++#define PXA2XX_SSP_CLK_AUDIO_DIV_16 4 ++#define PXA2XX_SSP_CLK_AUDIO_DIV_32 5 ++ ++/* SSP divider bypass */ ++#define PXA2XX_SSP_CLK_SCDB_4 0 ++#define PXA2XX_SSP_CLK_SCDB_1 1 ++ ++extern struct snd_soc_cpu_dai pxa_ssp_dai[3]; ++ ++#endif +Index: linux-2.6.23/sound/soc/pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/sound/soc/pxa/Kconfig 2007-10-10 09:38:42.000000000 +0200 ++++ linux-2.6.23/sound/soc/pxa/Kconfig 2007-10-22 22:27:11.000000000 +0200 +@@ -18,6 +18,10 @@ + config SND_PXA2XX_SOC_I2S + tristate + ++config SND_PXA2XX_SOC_SSP ++ tristate ++ select PXA_SSP ++ + config SND_PXA2XX_SOC_CORGI + tristate "SoC Audio support for Sharp Zaurus SL-C7x0" + depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx +Index: linux-2.6.23/sound/soc/pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/sound/soc/pxa/Makefile 2007-10-10 09:38:42.000000000 +0200 ++++ linux-2.6.23/sound/soc/pxa/Makefile 2007-10-22 22:27:11.000000000 +0200 +@@ -2,10 +2,12 @@ + snd-soc-pxa2xx-objs := pxa2xx-pcm.o + snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o + snd-soc-pxa2xx-i2s-objs := pxa2xx-i2s.o ++snd-soc-pxa2xx-ssp-objs := pxa2xx-ssp.o + + obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o + obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o + obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o ++obj-$(CONFIG_SND_PXA2XX_SOC_SSP) += snd-soc-pxa2xx-ssp.o + + # PXA Machine Support + snd-soc-corgi-objs := corgi.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/binutils-buildid-arm.patch b/packages/linux/linux-ezx-2.6.23/patches/binutils-buildid-arm.patch new file mode 100644 index 0000000000..68e35e89e1 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/binutils-buildid-arm.patch @@ -0,0 +1,16 @@ +--- + arch/arm/kernel/vmlinux.lds.S | 1 + + 1 file changed, 1 insertion(+) + +Index: linux-2.6.22/arch/arm/kernel/vmlinux.lds.S +=================================================================== +--- linux-2.6.22.orig/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:32:29.000000000 +0200 ++++ linux-2.6.22/arch/arm/kernel/vmlinux.lds.S 2007-09-11 18:33:42.000000000 +0200 +@@ -94,6 +94,7 @@ + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT ++ *(.note.*) + #ifdef CONFIG_MMU + *(.fixup) + #endif diff --git a/packages/linux/linux-ezx-2.6.23/patches/defconfig-a1200 b/packages/linux/linux-ezx-2.6.23/patches/defconfig-a1200 new file mode 100644 index 0000000000..4649d7ba96 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/defconfig-a1200 @@ -0,0 +1,1208 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:03:17 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +CONFIG_PXA_EZX_A1200=y +# CONFIG_PXA_EZX_E6 is not set +# CONFIG_EZX_BP is not set +CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y +# CONFIG_EZX_EMU is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +CONFIG_MTD_EZX=y +# CONFIG_MTD_EZX_A780 is not set +# CONFIG_MTD_EZX_A780_ALTERNATE is not set +CONFIG_MTD_EZX_A1200=y +# CONFIG_MTD_EZX_E2 is not set +# CONFIG_MTD_EZX_E6 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_EZX is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/patches/defconfig-a780 b/packages/linux/linux-ezx-2.6.23/patches/defconfig-a780 new file mode 100644 index 0000000000..921fa94b69 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/defconfig-a780 @@ -0,0 +1,1214 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:00:57 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +CONFIG_PXA_EZX_A780=y +# CONFIG_PXA_EZX_E2 is not set +# CONFIG_PXA_EZX_A1200 is not set +# CONFIG_PXA_EZX_E6 is not set +CONFIG_EZX_BP=y +CONFIG_EZX_PCAP=y +# CONFIG_EZX_EOC is not set +CONFIG_EZX_EMU=y +CONFIG_EZX_EMU_USB=y +# CONFIG_EZX_EMU_UART is not set +# CONFIG_EZX_EMU_NOTHING is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000 mem=16M@0xAC000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +CONFIG_MTD_EZX=y +CONFIG_MTD_EZX_A780=y +# CONFIG_MTD_EZX_A780_ALTERNATE is not set +# CONFIG_MTD_EZX_A1200 is not set +# CONFIG_MTD_EZX_E2 is not set +# CONFIG_MTD_EZX_E6 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_TS0710_MUX=y +CONFIG_TS0710_MUX_USB=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_A780=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_EZX=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/patches/defconfig-e2 b/packages/linux/linux-ezx-2.6.23/patches/defconfig-e2 new file mode 100644 index 0000000000..206ae45fc7 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/defconfig-e2 @@ -0,0 +1,1189 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:05:01 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +CONFIG_PXA_EZX_A1200=y +# CONFIG_PXA_EZX_E6 is not set +# CONFIG_EZX_BP is not set +CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y +# CONFIG_EZX_EMU is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_EZX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_EZX is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/patches/defconfig-e6 b/packages/linux/linux-ezx-2.6.23/patches/defconfig-e6 new file mode 100644 index 0000000000..733566adc6 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/defconfig-e6 @@ -0,0 +1,1203 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:07:51 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +# CONFIG_PXA_EZX_A1200 is not set +CONFIG_PXA_EZX_E6=y +# CONFIG_EZX_BP is not set +CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y +# CONFIG_EZX_EMU is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_EZX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_EZX is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/patches/defconfig-e680 b/packages/linux/linux-ezx-2.6.23/patches/defconfig-e680 new file mode 100644 index 0000000000..738e10324c --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/defconfig-e680 @@ -0,0 +1,1214 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 17:55:27 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +CONFIG_PXA_EZX_E680=y +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +# CONFIG_PXA_EZX_A1200 is not set +# CONFIG_PXA_EZX_E6 is not set +CONFIG_EZX_BP=y +CONFIG_EZX_PCAP=y +# CONFIG_EZX_EOC is not set +CONFIG_EZX_EMU=y +CONFIG_EZX_EMU_USB=y +# CONFIG_EZX_EMU_UART is not set +# CONFIG_EZX_EMU_NOTHING is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000 mem=16M@0xAC000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +CONFIG_MTD_EZX=y +CONFIG_MTD_EZX_A780=y +# CONFIG_MTD_EZX_A780_ALTERNATE is not set +# CONFIG_MTD_EZX_A1200 is not set +# CONFIG_MTD_EZX_E2 is not set +# CONFIG_MTD_EZX_E6 is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_TS0710_MUX=y +CONFIG_TS0710_MUX_USB=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_E680=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_EZX=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/patches/dmesg-a780.log b/packages/linux/linux-ezx-2.6.23/patches/dmesg-a780.log new file mode 100644 index 0000000000..6b15077676 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/dmesg-a780.log @@ -0,0 +1,299 @@ +<5>Linux version 2.6.21-ezxdev (wyrm@vault) (gcc version 4.1.1) #222 PREEMPT Tue May 8 15:19:34 BRT 2007 +<4>CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f +<4>Machine: Motorola Ezx Platform +<4>Memory policy: ECC disabled, Data cache writeback +<7>On node 0 totalpages: 12288 +<7> DMA zone: 416 pages used for memmap +<7> DMA zone: 0 pages reserved +<7> DMA zone: 11872 pages, LIFO batch:1 +<7> Normal zone: 0 pages used for memmap +<6>Run Mode clock: 195.00MHz (*15) +<6>Turbo Mode clock: 292.50MHz (*1.5, active) +<6>Memory clock: 195.00MHz (/2) +<6>System bus clock: 195.00MHz +<4>CPU0: D VIVT undefined 5 cache +<4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets +<4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets +<4>Built 1 zonelists. Total pages: 11872 +<5>Kernel command line: console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 ip=169.254.1.11:169.254.1.10:169.254.1.10:255.255.255.254:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000 +<4>PID hash table entries: 256 (order: 8, 1024 bytes) +<4>Console: colour dummy device 80x30 +<4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) +<4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) +<6>Memory: 32MB 16MB = 48MB total +<5>Memory: 46084KB available (2264K code, 217K data, 84K init) +<7>Calibrating delay loop... 291.63 BogoMIPS (lpj=1458176) +<4>Mount-cache hash table entries: 512 +<6>CPU: Testing write buffer coherency: ok +<6>NET: Registered protocol family 16 +<6>usbcore: registered new interface driver usbfs +<6>usbcore: registered new interface driver hub +<6>usbcore: registered new device driver usb +<6>Time: pxa_timer clocksource has been installed. +<6>NET: Registered protocol family 2 +<4>IP route cache hash table entries: 1024 (order: 0, 4096 bytes) +<4>TCP established hash table entries: 2048 (order: 2, 16384 bytes) +<4>TCP bind hash table entries: 2048 (order: 1, 8192 bytes) +<6>TCP: Hash tables configured (established 2048 bind 2048) +<6>TCP reno registered +<4>bp handshake entered! +<4>ezx-bp: handshake step 2 +<4>BP rdy irq +<4>bp handshake entered! +<5>ezx-bp: handshake passed +<4>ezx-pcap: ssp driver registered +<6>io scheduler noop registered +<6>io scheduler deadline registered (default) +<4>pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00200878 +<4>pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00300008 +<4>Console: switching to colour frame buffer device 60x53 +<6>usbcore: registered new interface driver usb ipc +<6>drivers/char/ts0710_mux_usb.c: USB Host(Bulverde) IPC driver registered. +<6>drivers/char/ts0710_mux_usb.c: 1.0alpha1:USB IPC Driver (TS07.10 lowlevel) +<6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART +<6>pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART +<6>pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART +<7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver +<6>pxa27x-ohci pxa27x-ohci: PXA27x OHCI +<6>pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1 +<6>pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000 +<6>usb usb1: configuration #1 chosen from 1 choice +<6>hub 1-0:1.0: USB hub found +<6>hub 1-0:1.0: 3 ports detected +<6>pxa27x_udc: version 08-Feb-2007 +<5>USB cmd disconnect +<5>USB cmd disconnect +<4>ether gadget: using random self ethernet address +<4>ether gadget: using random host ethernet address +<6>usb0: Ethernet Gadget, version: May Day 2005 +<6>usb0: using pxa27x_udc, OUT Bulk-out-2 IN Bulk-in-1 +<6>usb0: MAC 46:86:e0:79:e7:fb +<5>USB cmd connect +<5>USB cmd connect +<6>input: gpio-keys as /class/input/input0 +<6>input: pxa-keyboard as /class/input/input1 +<6>input: pcap-touchscreen as /class/input/input2 +<6>sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0 +<6>Registered led device: a780:main +<6>Registered led device: a780:aux +<6>Registered led device: a780:vibrator +<6>TCP cubic registered +<6>NET: Registered protocol family 1 +<6>NET: Registered protocol family 17 +<6>XScale iWMMXt coprocessor detected. +<6>sa1100-rtc sa1100-rtc: setting the system clock to 1970-01-01 00:00:16 (16) +<6>mmcblk0: mmc0:bffc SU02G 1985024KiB +<6>udc: USB reset +<6> mmcblk0:<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 2 +<4> p1 p2 p3 < p5 p6 p7 > +<6>udc: USB reset +<3>usb 1-3: device descriptor read/64, error -62 +<6>usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset +<3>usb 1-3: device descriptor read/64, error -62 +<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 3 +<3>usb 1-3: device descriptor read/64, error -62 +<4>IP-Config: Complete: +<4> device=usb0, addr=169.254.1.11, mask=255.255.255.254, gw=169.254.1.10, +<4> host=ezx, domain=, nis-domain=(none), +<4> bootserver=169.254.1.10, rootserver=169.254.1.10, rootpath= +<6>kjournald starting. Commit interval 5 seconds +<4>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended +<6>EXT3 FS on mmcblk0p2, internal journal +<6>EXT3-fs: recovery complete. +<6>EXT3-fs: mounted filesystem with ordered data mode. +<4>VFS: Mounted root (ext3 filesystem). +<6>Freeing init memory: 84K +<3>usb 1-3: device descriptor read/64, error -110 +<6>usb 1-3: new full speed USB device using pxa27x-ohci and address 4 +<3>usb 1-3: device descriptor read/8, error -62 +<4>usb 1-3: config 1 has an invalid interface number: 13 but max is 2 +<4>usb 1-3: config 1 has an invalid interface number: 6 but max is 2 +<4>usb 1-3: config 1 has an invalid interface number: 7 but max is 2 +<4>usb 1-3: config 1 has no interface number 0 +<4>usb 1-3: config 1 has no interface number 1 +<4>usb 1-3: config 1 has no interface number 2 +<6>usb 1-3: configuration #1 chosen from 1 choice +<4>usb_ipc_probe: completed probe! +<6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported. +<4>usb ipc: probe of 1-3:1.6 failed with error -1 +<6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported. +<4>usb ipc: probe of 1-3:1.7 failed with error -1 +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2009 bytes from ts0710_mux_usb inbuf. +<4>Read 21 bytes. +<4>Reading max 1988 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2009 bytes from ts0710_mux_usb inbuf. +<4>Read 21 bytes. +<4>Reading max 1988 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2009 bytes from ts0710_mux_usb inbuf. +<4>Read 21 bytes. +<4>Reading max 1988 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2009 bytes from ts0710_mux_usb inbuf. +<4>Read 21 bytes. +<4>Reading max 1988 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2009 bytes from ts0710_mux_usb inbuf. +<4>Read 21 bytes. +<4>Reading max 1988 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 11 bytes. +<4>Reading max 2037 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 17 bytes. +<4>Reading max 2031 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 11 bytes. +<4>Reading max 2037 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 7 bytes. +<4>Reading max 2041 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 11 bytes. +<4>Reading max 2037 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2016 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1984 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1952 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1920 bytes from ts0710_mux_usb inbuf. +<4>Read 6 bytes. +<4>Reading max 1914 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1882 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1850 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1818 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1786 bytes from ts0710_mux_usb inbuf. +<4>Read 6 bytes. +<4>Reading max 1780 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1748 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1716 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1684 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1652 bytes from ts0710_mux_usb inbuf. +<4>Read 6 bytes. +<4>Reading max 1646 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2016 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1984 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1952 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1920 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1888 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1856 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1824 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1792 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1760 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1728 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1696 bytes from ts0710_mux_usb inbuf. +<4>Read 16 bytes. +<4>Reading max 1680 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2016 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1984 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1952 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1920 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1888 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1856 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1824 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1792 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1760 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1728 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 1696 bytes from ts0710_mux_usb inbuf. +<4>Read 13 bytes. +<4>Reading max 1683 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 14 bytes. +<4>Reading max 2034 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>Read 32 bytes. +<4>Reading max 2016 bytes from ts0710_mux_usb inbuf. +<4>Read 2 bytes. +<4>Reading max 2014 bytes from ts0710_mux_usb inbuf. +<4>Reading max 2048 bytes from ts0710_mux_usb inbuf. +<4>nonzero read bulk status received: -104 diff --git a/packages/linux/linux-ezx-2.6.23/patches/e6-eoc.patch b/packages/linux/linux-ezx-2.6.23/patches/e6-eoc.patch new file mode 100644 index 0000000000..3824079c15 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e6-eoc.patch @@ -0,0 +1,20 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-24 20:14:54.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-24 20:15:18.000000000 -0300 +@@ -203,8 +203,15 @@ + }, + }; + ++ ++struct platform_device e6_eoc_device = { ++ .name = "ezx-eoc", ++ .id = -1, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e6_pcap_device, ++ &e6_eoc_device, + }; + + static void __init e6_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e6-mci.patch b/packages/linux/linux-ezx-2.6.23/patches/e6-mci.patch new file mode 100644 index 0000000000..09886f42d4 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e6-mci.patch @@ -0,0 +1,124 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e6.c 2007-10-24 19:35:51.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c 2007-10-24 19:58:02.000000000 +0200 +@@ -13,6 +13,8 @@ + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/fb.h> ++#include <linux/mmc/host.h> ++#include <linux/irq.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -20,12 +22,102 @@ + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> ++#include <asm/arch/mmc.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); + ++#ifdef CONFIG_EZX_PCAP ++extern int ezx_pcap_mmcsd_power(int); ++extern void ezx_pcap_mmcsd_voltage(u_int32_t); ++#else ++#define ezx_pcap_mmcsd_voltage(x) {} ++#define ezx_pcap_mmcsd_power(x) {} ++#endif ++ ++static struct pxamci_platform_data e6_mci_platform_data; ++ ++static u_int8_t mmc_voltage[] = { ++ [ilog2(MMC_VDD_165_195)] = 6, ++ [ilog2(MMC_VDD_20_21)] = 7, ++ [ilog2(MMC_VDD_21_22)] = 8, ++ [ilog2(MMC_VDD_22_23)] = 8, ++ [ilog2(MMC_VDD_23_24)] = 9, ++ [ilog2(MMC_VDD_24_25)] = 9, ++ [ilog2(MMC_VDD_25_26)] = 10, ++ [ilog2(MMC_VDD_26_27)] = 10, ++ [ilog2(MMC_VDD_27_28)] = 11, ++ [ilog2(MMC_VDD_28_29)] = 11, ++ [ilog2(MMC_VDD_29_30)] = 12, ++ [ilog2(MMC_VDD_30_31)] = 12, ++ [ilog2(MMC_VDD_31_32)] = 13, ++ [ilog2(MMC_VDD_32_33)] = 13, ++ [ilog2(MMC_VDD_33_34)] = 14, ++ [ilog2(MMC_VDD_34_35)] = 14, ++ [ilog2(MMC_VDD_35_36)] = 15, ++}; ++ ++static int e6_mci_init(struct device *dev, ++ irqreturn_t (*ezx_detect_int)(int, void *), ++ void *data) ++{ ++ int err; ++ ++ /* Setup GPIO for PXA27x MMC/SD controller */ ++ pxa_gpio_mode(GPIO32_MMCCLK_MD); ++ pxa_gpio_mode(GPIO112_MMCCMD_MD); ++ pxa_gpio_mode(GPIO92_MMCDAT0_MD); ++ pxa_gpio_mode(GPIO109_MMCDAT1_MD); ++ pxa_gpio_mode(GPIO110_MMCDAT2_MD); ++ pxa_gpio_mode(GPIO111_MMCDAT3_MD); ++ ++ ezx_pcap_mmcsd_power(1); ++ ++ e6_mci_platform_data.detect_delay = msecs_to_jiffies(250); ++ ++ err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED, ++ "MMC card detect", data); ++ if (err) { ++ printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request " ++ "MMC card detect IRQ\n"); ++ return -1; ++ } ++ ++ set_irq_type(0x0b, IRQT_BOTHEDGE); ++ ++ return 0; ++} ++ ++static void e6_mci_setpower(struct device *dev, unsigned int vdd) ++{ ++ struct pxamci_platform_data* p_d = dev->platform_data; ++ ++ if (( 1 << vdd) & p_d->ocr_mask) ++ ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]); ++ ++ ezx_pcap_mmcsd_power(1); ++} ++ ++static void e6_mci_exit(struct device *dev, void *data) ++{ ++ ezx_pcap_mmcsd_power(0); ++ free_irq(0x49, data); ++} ++ ++static struct pxamci_platform_data e6_mci_platform_data = { ++ .ocr_mask = MMC_VDD_165_195|MMC_VDD_20_21|MMC_VDD_21_22 ++ |MMC_VDD_22_23|MMC_VDD_23_24|MMC_VDD_24_25 ++ |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 ++ |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31 ++ |MMC_VDD_31_32|MMC_VDD_32_33|MMC_VDD_33_34 ++ |MMC_VDD_34_35|MMC_VDD_35_36, ++ .init = e6_mci_init, ++ .setpower = e6_mci_setpower, ++ .exit = e6_mci_exit, ++}; ++ + static struct pxafb_mode_info mode_e6 = { + .pixclock = 192308, + .xres = 240, +@@ -118,6 +210,7 @@ + static void __init e6_init(void) + { + set_pxa_fb_info(&e6_fb_info); ++ pxa_set_mci_info(&e6_mci_platform_data); + + platform_add_devices(devices, ARRAY_SIZE(devices)); + } diff --git a/packages/linux/linux-ezx-2.6.23/patches/e6-pcap.patch b/packages/linux/linux-ezx-2.6.23/patches/e6-pcap.patch new file mode 100644 index 0000000000..a11adbc02e --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e6-pcap.patch @@ -0,0 +1,83 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:32:32.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-07 11:51:55.000000000 -0300 +@@ -19,6 +19,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -48,7 +49,70 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init e6_pcap_init(void) ++{ ++ /* ++ * FIXME: this is the PCAP INITIAL STATE. ++ * most of these writes should NOT be done here ++ * * voltage regulators, voltage enablers should be set by the ++ * driver which uses the connected hardware. Otherwise you ++ * drain power unnecessarily. ++ * * interrupt related registers should be set by the irq functions ++ * only. I think that the INT_SEL register selects on which irq ++ * pin the (ap/bp) the irq goes. This should go on ezx-pcap.c, but ++ * only if it actually makes any difference. ++ * * Only power state automatic changes should be done here. ++ * (*LOWPWR, *STBY, LOWPWR*) ++ * * I removed some writes which i consider extremelly wrong. And ++ * which i think will not break anything (they were overwritten ++ * later anyway). ++ * ++ * --WM ++ */ ++ ezx_pcap_write(PCAP_REG_INT_SEL, 0x0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_SWCTRL, 0x2ee6); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_VREG1, 0x15778e3); /* wrong */ ++ ezx_pcap_write(PCAP_REG_VREG2, 0x810234); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_AUXVREG, 0x1024bec); /* wrong */ ++ ezx_pcap_write(PCAP_REG_PWR, 0x94108); /* partially wrong */ ++ ezx_pcap_write(PCAP_REG_AUXVREG_MASK, 0x214d48); /* wrong */ ++ ezx_pcap_write(PCAP_REG_BUSCTRL, 0x2a0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_LOWPWR, 0x1d9610c); ++ ezx_pcap_write(PCAP_REG_PERIPH, 0x0); /* wrong */ ++ ezx_pcap_write(PCAP_REG_GP, 0x107); /* probably unnecessary */ ++ ++ return 0; ++} ++ ++static struct pcap_platform_data e6_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_CS_AH | PCAP_MCI_SD, ++ .clk = 1, ++ .init = e6_pcap_init, ++}; ++ ++static struct resource e6_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device e6_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(e6_pcap_resources), ++ .resource = e6_pcap_resources, ++ .dev = { ++ .platform_data = &e6_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &e6_pcap_device, + }; + + static void __init e6_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e6-ts.patch b/packages/linux/linux-ezx-2.6.23/patches/e6-ts.patch new file mode 100644 index 0000000000..ad4a52eeec --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e6-ts.patch @@ -0,0 +1,39 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e6.c 2007-09-25 00:03:01.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e6.c 2007-09-25 02:00:58.000000000 -0300 +@@ -209,9 +209,34 @@ + .id = -1, + }; + ++/* PCAP_TS */ ++struct resource pcap_ts_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_ADCDONE, ++ .end = EZX_IRQ_ADCDONE, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_TS, ++ .end = EZX_IRQ_TS, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++struct platform_device pcap_ts_device = { ++ .name = "pcap-ts", ++ .id = -1, ++ .dev = { ++ .parent = &e6_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(pcap_ts_resources), ++ .resource = pcap_ts_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e6_pcap_device, + &e6_eoc_device, ++ &pcap_ts_device, + }; + + static void __init e6_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-emu.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-emu.patch new file mode 100644 index 0000000000..6302bba8c7 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-emu.patch @@ -0,0 +1,38 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:01:32.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:01:37.000000000 +0200 +@@ -212,8 +212,33 @@ + }, + }; + ++/* EMU */ ++static struct resource e680_emu_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_USB4V, ++ .end = EZX_IRQ_USB4V, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_USB1V, ++ .end = EZX_IRQ_USB1V, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device e680_emu_device = { ++ .name = "ezx-emu", ++ .id = -1, ++ .dev = { ++ .parent = &e680_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(e680_emu_resources), ++ .resource = e680_emu_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, ++ &e680_emu_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-kbd.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-kbd.patch new file mode 100644 index 0000000000..27e33a0641 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-kbd.patch @@ -0,0 +1,93 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:01:37.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:01:49.000000000 +0200 +@@ -15,6 +15,7 @@ + #include <linux/fb.h> + #include <linux/mmc/host.h> + #include <linux/irq.h> ++#include <linux/input.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -23,11 +24,13 @@ + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> + #include <asm/arch/mmc.h> ++#include <asm/arch/kbd.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); ++extern void __init pxa_set_kbd_info(struct pxakbd_platform_data *); + + #ifdef CONFIG_EZX_PCAP + extern int ezx_pcap_mmcsd_power(int); +@@ -236,6 +239,58 @@ + .resource = e680_emu_resources, + }; + ++static unsigned char e680_keycode[] = { ++ /* row 0 */ ++ KEY_UP, KEY_RIGHT, KEY_RESERVED, KEY_PHONE, ++ /* row 1 */ ++ KEY_DOWN, KEY_LEFT, KEY_VOLUMEUP, KEY_VOLUMEDOWN, ++ /* row 2 */ ++ KEY_RESERVED, KEY_RESERVED, KEY_RESERVED, KEY_KPENTER, ++}; ++ ++static unsigned char e680_direct_keycode[] = { ++ KEY_CAMERA, ++ KEY_RESERVED, ++ KEY_RESERVED, ++ KEY_HOME, ++ KEY_POWER, ++ KEY_MENU, ++}; ++ ++static int e680_kbd_init(void) ++{ ++ pxa_gpio_mode(93 | GPIO_ALT_FN_1_IN); /* KP_DKIN<0>, VR Key */ ++ pxa_gpio_mode(96 | GPIO_ALT_FN_1_IN); /* KP_DKIN<3>, GAME_A */ ++ pxa_gpio_mode(97 | GPIO_ALT_FN_1_IN); /* KP_DKIN<4>, power key */ ++ pxa_gpio_mode(98 | GPIO_ALT_FN_1_IN); /* KP_DKIN<5>, GAME_B */ ++ pxa_gpio_mode(100 | GPIO_ALT_FN_1_IN); /* KP_MKIN<0> */ ++ pxa_gpio_mode(101 | GPIO_ALT_FN_1_IN); /* KP_MKIN<1> */ ++ pxa_gpio_mode(102 | GPIO_ALT_FN_1_IN); /* KP_MKIN<2> */ ++ pxa_gpio_mode(103 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<0> */ ++ pxa_gpio_mode(104 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<1> */ ++ pxa_gpio_mode(105 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<2> */ ++ pxa_gpio_mode(106 | GPIO_ALT_FN_2_OUT); /* KP_MKOUT<3> */ ++ pxa_gpio_mode(GPIO_TC_MM_EN); ++ GPDR(GPIO_TC_MM_EN) |= GPIO_bit(GPIO_TC_MM_EN); ++ GPSR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); ++ PGSR3 |= GPIO_bit(GPIO_TC_MM_EN); ++ return 0; ++} ++ ++static struct pxakbd_platform_data e680_kbd_platform_data = { ++ .init = &e680_kbd_init, ++ .scan_interval = HZ/40, ++ .matrix = { ++ .keycode = e680_keycode, ++ .cols = 4, ++ .rows = 3, ++ }, ++ .direct = { ++ .keycode = e680_direct_keycode, ++ .num = 6, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, +@@ -256,6 +311,7 @@ + + set_pxa_fb_info(&e680_fb_info); + pxa_set_mci_info(&e680_mci_platform_data); ++ pxa_set_kbd_info(&e680_kbd_platform_data); + + /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ + pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-leds.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-leds.patch new file mode 100644 index 0000000000..871f99be95 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-leds.patch @@ -0,0 +1,300 @@ + +# +# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher +# + +Index: linux-2.6.23/drivers/leds/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/leds/Kconfig 2007-10-24 20:02:07.000000000 +0200 ++++ linux-2.6.23/drivers/leds/Kconfig 2007-10-24 20:02:07.000000000 +0200 +@@ -117,6 +117,13 @@ + This option enables support for the LEDs on the + Motorola A780 GSM Phone. + ++config LEDS_E680 ++ tristate "LED Support for the Motorola E680(i) GSM Phone" ++ depends LEDS_CLASS && PXA_EZX_E680 ++ help ++ This options enables support for the LEDs on the ++ Motorola E680(i) GSM Phone. ++ + config LEDS_TRIGGER_TIMER + tristate "LED Timer Trigger" + depends on LEDS_TRIGGERS +Index: linux-2.6.23/drivers/leds/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/leds/Makefile 2007-10-24 20:02:07.000000000 +0200 ++++ linux-2.6.23/drivers/leds/Makefile 2007-10-24 20:02:07.000000000 +0200 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o + obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o + obj-$(CONFIG_LEDS_A780) += leds-a780.o ++obj-$(CONFIG_LEDS_E680) += leds-e680.o + + # LED Triggers + obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o +Index: linux-2.6.23/drivers/leds/leds-e680.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/leds/leds-e680.c 2007-10-24 20:02:07.000000000 +0200 +@@ -0,0 +1,235 @@ ++/* ++ * EZX Platform LED Driver for the Motorola E680(i) GSM Phone ++ * ++ * Copyright 2006 Vanille-Media ++ * ++ * Author: Michael Lauer <mickey@Vanille.de> ++ * ++ * Based on the Motorola 2.4 leds-e680.c and leds-corgi.c by Richard Purdie ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/delay.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/leds.h> ++#include <asm/mach-types.h> ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx-pcap.h> ++ ++//FIXME move defines to a common header file ++#define IND_CNTL_R_BUL 46 ++#define IND_CNTL_G_BUL 47 ++#define SSP_PCAP_LED_MASK 0x000fffe0 ++#define SSP_PCAP_LED_SHIFT 5 ++#define GPIO_TC_MM_EN 99 ++ ++extern int ezx_pcap_read(u_int8_t, u_int32_t *); ++extern int ezx_pcap_write(u_int8_t, u_int32_t); ++ ++typedef struct { ++ u_int8_t ind_GPIO_red; /*Indicator Red control GPIO 46: 0 active, 1 inactive */ ++ u_int8_t ind_GPIO_green; /*Indicator Green control GPIO 47: 0 inactive, 1 active */ ++ u_int8_t pcap_LEDR_en; /*pcap LEDR_EN bit value: 1 =Red LED(&Green) sink circuit enabled*/ ++ u_int8_t pcap_LEDG_en; /*pcap LEDG_EN bit value:1 =Green(->Blue)LED sink circuit enabled*/ ++ u_int8_t pcap_LEDR_CTRL; /* 4bits Sets the timing for the red(&Green) LED sink circuit*/ ++ u_int8_t pcap_LEDG_CTRL; /* 4bits Sets the timing for the GREEN (->Blue) LED sink circuit*/ ++ u_int8_t pcap_LEDR_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDR*/ ++ u_int8_t pcap_LEDG_I; /* 2 bits 00 3mA,01 4mA, 10 5mA, 11 9mA, sets the pulsed current level for LEDG*/ ++// u_int8_t pcap_SKIP_on; /*1=The ON timing sequence defined by LEDx_CTRL is executed on every other cycle*/ ++} PCAP2_LED_REGISTER_VALUE; ++ ++const PCAP2_LED_REGISTER_VALUE led_register_value[]= ++{ ++ {0x1,0x0, 0x0,0x0, 0x0,0x0, 0x1,0x0}, /* 0 OFF */ ++ ++ {0x0,0x0, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 1 RED */ ++ {0x1,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 2 GREEN */ ++ {0x0,0x1, 0x1,0x0, 0xf,0x0, 0x1,0x0}, /* 3 ORANGE */ ++ {0x1,0x0, 0x0,0x1, 0x0,0xf, 0x0,0x0}, /* 4 BLUE */ ++ {0x0,0x0, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 5 MAGENTA */ ++ {0x1,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 6 CYAN */ ++ {0x0,0x1, 0x1,0x1, 0xf,0xf, 0x1,0x0}, /* 7 WHITE */ ++}; ++ ++static void e680led_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ unsigned int tempValue; ++ unsigned char gpio_red, gpio_green, ledr_en, ledg_en, ledr_ctrl, ++ ledg_ctrl, ledr_i, ledg_i, skip, t, color; ++ unsigned char t_mask[2] = { 0xc, 0xc }; ++ ++ skip = 0; ++ if (value & 128) { ++ value &= (~128); ++ skip = 1; ++ } ++ ++ /* 7 colors - simple on */ ++ if (value <= 7) ++ color = value; ++ /* 4 colors - 11 timed on */ ++ else if (value <= 51) { ++ value -= 7; ++ color = ((value-1)%4)+1; ++ t = ((value-1)/4)+1; ++ t_mask[0] = t; ++ t_mask[1] = t; ++ } ++ /* 3 colors - 22 change color */ ++ else if (value <= 84) { ++ value -= 51; ++ color = ((value-1)%3)+5; ++ t = ((value-1)/3)+1; ++ t_mask[1] = t; ++ } ++ else if (value <= 117) { ++ value -= 84; ++ color = ((value-1)%3)+5; ++ t = ((value-1)/3)+1; ++ t_mask[0] = t; ++ } ++ /* 3 colors - alternate with blue */ ++ else if (value <= 120) { ++ color = value-113; ++ t_mask[0] = 0xa; ++ t_mask[1] = 0xb; ++ } ++ /* invalid value */ ++ else ++ color = 1; ++ ++ gpio_red = led_register_value[color].ind_GPIO_red; ++ gpio_green = led_register_value[color].ind_GPIO_green; ++ ledr_en = led_register_value[color].pcap_LEDR_en; ++ ledg_en = led_register_value[color].pcap_LEDG_en; ++ ledr_ctrl = led_register_value[color].pcap_LEDR_CTRL & t_mask[0]; ++ ledg_ctrl = led_register_value[color].pcap_LEDG_CTRL & t_mask[1]; ++ ledr_i = led_register_value[color].pcap_LEDR_I; ++ ledg_i = led_register_value[color].pcap_LEDG_I; ++ ++ ezx_pcap_read(PCAP_REG_PERIPH,&tempValue); ++ ++ tempValue &= (~SSP_PCAP_LED_MASK); ++ ++ pxa_gpio_set_value(IND_CNTL_R_BUL, gpio_red); ++ pxa_gpio_set_value(IND_CNTL_G_BUL, gpio_green); ++ ++ /* Write PCAP LED Peripheral Control Register*/ ++ tempValue = ((ledr_en | (ledg_en << 1) | (ledr_ctrl << 2) | ++ (ledg_ctrl << 6) | (ledr_i << 10) | (ledg_i << 12) | ++ (skip << 14)) & 0x7fff) << SSP_PCAP_LED_SHIFT; ++ ++ ezx_pcap_write(PCAP_REG_PERIPH,tempValue); ++} ++ ++static void e680led_keypad_set(struct led_classdev *led_cdev, enum led_brightness value) ++{ ++ /* this is not working yet, as there is something else missing */ ++#if 0 ++ printk( KERN_DEBUG "e680led_keypad_set: %d\n", value ); ++ ++ pxa_gpio_mode(GPIO_TC_MM_EN); ++ GPDR(GPIO_TC_MM_EN) |= GPIO_bit(GPIO_TC_MM_EN); ++ GPSR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); ++ ++ udelay( 100 ); ++ ++ if ( value ) { ++ GPCR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); ++ PGSR3 &= ~GPIO_bit(GPIO_TC_MM_EN); ++ } else { ++ GPSR(GPIO_TC_MM_EN) = GPIO_bit(GPIO_TC_MM_EN); ++ PGSR3 |= GPIO_bit(GPIO_TC_MM_EN); ++ } ++#endif ++} ++ ++static struct led_classdev e680_led = { ++ .name = "e680:led", ++ .default_trigger = "none", ++ .brightness_set = e680led_set, ++}; ++ ++static struct led_classdev e680_keypad = { ++ .name = "e680:keypad", ++ .default_trigger = "none", ++ .brightness_set = e680led_keypad_set, ++}; ++ ++#ifdef CONFIG_PM ++static int e680led_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ led_classdev_suspend(&e680_led); ++ led_classdev_suspend(&e680_keypad); ++ return 0; ++} ++ ++static int e680led_resume(struct platform_device *dev) ++{ ++ led_classdev_resume(&e680_led); ++ led_classdev_resume(&e680_keypad); ++ return 0; ++} ++#endif ++ ++static int e680led_probe(struct platform_device *pdev) ++{ ++ int ret; ++ ++ /* configure GPIOs as output */ ++ pxa_gpio_mode(IND_CNTL_R_BUL | GPIO_OUT); ++ pxa_gpio_mode(IND_CNTL_G_BUL | GPIO_OUT); ++ ++ ret = led_classdev_register(&pdev->dev, &e680_led); ++ if (ret < 0) ++ return ret; ++ ++ ret = led_classdev_register(&pdev->dev, &e680_keypad); ++ if (ret < 0) { ++ led_classdev_unregister(&e680_led); ++ } ++ return ret; ++} ++ ++static int e680led_remove(struct platform_device *pdev) ++{ ++ led_classdev_unregister(&e680_led); ++ led_classdev_unregister(&e680_keypad); ++ return 0; ++} ++ ++static struct platform_driver e680led_driver = { ++ .probe = e680led_probe, ++ .remove = e680led_remove, ++#ifdef CONFIG_PM ++ .suspend = e680led_suspend, ++ .resume = e680led_resume, ++#endif ++ .driver = { ++ .name = "e680-led", ++ }, ++}; ++ ++static int __init e680led_init(void) ++{ ++ return platform_driver_register(&e680led_driver); ++} ++ ++static void __exit e680led_exit(void) ++{ ++ platform_driver_unregister(&e680led_driver); ++} ++ ++module_init(e680led_init); ++module_exit(e680led_exit); ++ ++MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>"); ++MODULE_DESCRIPTION("Motorola E680 LED driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:02:05.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:02:07.000000000 +0200 +@@ -337,11 +337,20 @@ + }, + }; + ++static struct platform_device e680led_device = { ++ .name = "e680-led", ++ .id = -1, ++ .dev = { ++ .parent = &e680_pcap_device.dev, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, + &pcap_ts_device, + &e680locksw_device, ++ &e680led_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-locksw.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-locksw.patch new file mode 100644 index 0000000000..6bb6687400 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-locksw.patch @@ -0,0 +1,45 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 18:58:55.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 18:59:23.000000000 +0200 +@@ -16,6 +16,7 @@ + #include <linux/mmc/host.h> + #include <linux/irq.h> + #include <linux/input.h> ++#include <linux/gpio_keys.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -315,10 +316,32 @@ + .resource = pcap_ts_resources, + }; + ++static struct gpio_keys_button e680locksw_buttons[] = { ++ [0] = { ++ .code = KEY_SLEEP, ++ .gpio = GPIO_LOCK_SCREEN_PIN, ++ .desc = "E680 lockscreen sw", ++ }, ++}; ++ ++static struct gpio_keys_platform_data e680locksw_platform_data = { ++ .buttons = e680locksw_buttons, ++ .nbuttons = 1, ++}; ++ ++static struct platform_device e680locksw_device = { ++ .name = "gpio-keys", ++ .id = -1, ++ .dev = { ++ .platform_data = &e680locksw_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, + &pcap_ts_device, ++ &e680locksw_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-mci.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-mci.patch new file mode 100644 index 0000000000..73981823cf --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-mci.patch @@ -0,0 +1,126 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 13:03:06.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 18:54:35.000000000 +0200 +@@ -13,6 +13,8 @@ + #include <linux/init.h> + #include <linux/platform_device.h> + #include <linux/fb.h> ++#include <linux/mmc/host.h> ++#include <linux/irq.h> + + #include <asm/mach-types.h> + #include <asm/mach/arch.h> +@@ -20,12 +22,104 @@ + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> + #include <asm/arch/ezx-pcap.h> ++#include <asm/arch/mmc.h> + + #include "generic.h" + + extern void ezx_lcd_power(int, struct fb_var_screeninfo *); + extern void ezx_backlight_power(int); + ++#ifdef CONFIG_EZX_PCAP ++extern int ezx_pcap_mmcsd_power(int); ++extern void ezx_pcap_mmcsd_voltage(u_int32_t); ++#else ++#define ezx_pcap_mmcsd_voltage(x) {} ++#define ezx_pcap_mmcsd_power(x) {} ++#endif ++ ++static struct pxamci_platform_data e680_mci_platform_data; ++ ++static u_int8_t mmc_voltage[] = { ++ [ilog2(MMC_VDD_165_195)] = 3, ++ [ilog2(MMC_VDD_20_21)] = 3, ++ [ilog2(MMC_VDD_21_22)] = 3, ++ [ilog2(MMC_VDD_22_23)] = 3, ++ [ilog2(MMC_VDD_23_24)] = 3, ++ [ilog2(MMC_VDD_24_25)] = 3, ++ [ilog2(MMC_VDD_25_26)] = 3, ++ [ilog2(MMC_VDD_26_27)] = 3, ++ [ilog2(MMC_VDD_27_28)] = 3, ++ [ilog2(MMC_VDD_28_29)] = 3, ++ [ilog2(MMC_VDD_29_30)] = 3, ++ [ilog2(MMC_VDD_30_31)] = 3, ++ [ilog2(MMC_VDD_31_32)] = 3, ++ [ilog2(MMC_VDD_32_33)] = 3, ++ [ilog2(MMC_VDD_33_34)] = 3, ++ [ilog2(MMC_VDD_34_35)] = 3, ++ [ilog2(MMC_VDD_35_36)] = 3, ++}; ++ ++static int e680_mci_init(struct device *dev, ++ irqreturn_t (*ezx_detect_int)(int, void *), ++ void *data) ++{ ++ int err; ++ ++ /* Setup GPIO for PXA27x MMC/SD controller */ ++ pxa_gpio_mode(GPIO32_MMCCLK_MD); ++ pxa_gpio_mode(GPIO112_MMCCMD_MD); ++ pxa_gpio_mode(GPIO92_MMCDAT0_MD); ++ pxa_gpio_mode(GPIO109_MMCDAT1_MD); ++ pxa_gpio_mode(GPIO110_MMCDAT2_MD); ++ pxa_gpio_mode(GPIO111_MMCDAT3_MD); ++ ++ ezx_pcap_mmcsd_power(1); ++ ++ e680_mci_platform_data.detect_delay = msecs_to_jiffies(250); ++ ++ err = request_irq(0x49, ezx_detect_int, IRQF_DISABLED, ++ "MMC card detect", data); ++ if (err) { ++ printk(KERN_ERR "ezx_mci_detect: MMC/SD: can't request " ++ "MMC card detect IRQ\n"); ++ return -1; ++ } ++ ++ set_irq_type(0x0b, IRQT_BOTHEDGE); ++ ++ return 0; ++} ++ ++ ++static inline int e680_mci_get_ro(struct device *dev) ++{ ++ return (GPLR3 & 0x800); ++} ++ ++static void e680_mci_setpower(struct device *dev, unsigned int vdd) ++{ ++ struct pxamci_platform_data* p_d = dev->platform_data; ++ ++ if (( 1 << vdd) & p_d->ocr_mask) ++ ezx_pcap_mmcsd_voltage(mmc_voltage[vdd]); ++ ++ ezx_pcap_mmcsd_power(1); ++} ++ ++static void e680_mci_exit(struct device *dev, void *data) ++{ ++ ezx_pcap_mmcsd_power(0); ++ free_irq(0x49, data); ++} ++ ++static struct pxamci_platform_data e680_mci_platform_data = { ++ .ocr_mask = MMC_VDD_27_28, ++ .init = e680_mci_init, ++ .get_ro = e680_mci_get_ro, ++ .setpower = e680_mci_setpower, ++ .exit = e680_mci_exit, ++}; ++ + static struct pxafb_mode_info mode_e680 = { + .pixclock = 150000, + .xres = 240, +@@ -136,6 +230,7 @@ + PSLR = 0x05800f00; + + set_pxa_fb_info(&e680_fb_info); ++ pxa_set_mci_info(&e680_mci_platform_data); + + /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ + pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-pcap.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-pcap.patch new file mode 100644 index 0000000000..12ce023749 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-pcap.patch @@ -0,0 +1,90 @@ +Index: linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.21.orig/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:41:38.000000000 -0300 ++++ linux-2.6.21/arch/arm/mach-pxa/ezx-e680.c 2007-09-06 00:44:56.000000000 -0300 +@@ -19,6 +19,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> + + #include "generic.h" + +@@ -48,7 +49,77 @@ + .pxafb_lcd_power = &ezx_lcd_power, + }; + ++/* PCAP */ ++static int __init e680_pcap_init(void) ++{ ++ /* initialize PCAP registers */ ++ /* set SW1 sleep to keep SW1 1.3v in sync mode */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE10, 0); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE11, 0); ++ ++ /* SW1 active in sync mode */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE00, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW1_MODE01, 0); ++ ++ /* at SW1 -core voltage to 1.30V */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW10_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW11_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW12_DVS, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_SW13_DVS, 0); ++ ++ /* when STANDY2 PIN ACTIVE (high) set V3-- sram V8 -- pll off */ ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V3_LOWPWR, 0); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V8_LOWPWR, 0); ++ ++ /* ++ * when STANDY2 PIN ACTIVE (high) set V4-- lcd only for e680 V6 --- ++ * camera for e680 ++ */ ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V4_LOWPWR, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_VREG2_V6_LOWPWR, 0); ++ ++ /* set Vc to low power mode when AP sleep */ ++// SSP_PCAP_bit_set( PCAP_BIT_LOWPWR_CTRL_VC_STBY); ++ ++ /* set VAUX2 to low power mode when AP sleep */ ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_STBY, 1); ++ ezx_pcap_bit_set(PCAP_BIT_LOWPWR_VAUX2_LOWPWR, 1); ++ ++ return 0; ++} ++ ++static struct pcap_platform_data e680_pcap_platform_data = { ++ .port = 1, ++ .cs = GPIO_SPI_CE, ++ .flags = PCAP_MCI_SD, ++ .clk = 1, ++ .init = e680_pcap_init, ++}; ++ ++static struct resource e680_pcap_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO1, ++ .end = IRQ_GPIO1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device e680_pcap_device = { ++ .name = "ezx-pcap", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(e680_pcap_resources), ++ .resource = e680_pcap_resources, ++ .dev = { ++ .platform_data = &e680_pcap_platform_data, ++ }, ++}; ++ + static struct platform_device *devices[] __initdata = { ++ &e680_pcap_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/e680-ts.patch b/packages/linux/linux-ezx-2.6.23/patches/e680-ts.patch new file mode 100644 index 0000000000..2350b2de82 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/e680-ts.patch @@ -0,0 +1,39 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:01:49.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 20:01:58.000000000 +0200 +@@ -291,9 +291,34 @@ + }, + }; + ++/* PCAP_TS */ ++struct resource pcap_ts_resources[] = { ++ [0] = { ++ .start = EZX_IRQ_ADCDONE2, ++ .end = EZX_IRQ_ADCDONE2, ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = EZX_IRQ_TS, ++ .end = EZX_IRQ_TS, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++struct platform_device pcap_ts_device = { ++ .name = "pcap-ts", ++ .id = -1, ++ .dev = { ++ .parent = &e680_pcap_device.dev, ++ }, ++ .num_resources = ARRAY_SIZE(pcap_ts_resources), ++ .resource = pcap_ts_resources, ++}; ++ + static struct platform_device *devices[] __initdata = { + &e680_pcap_device, + &e680_emu_device, ++ &pcap_ts_device, + }; + + static void __init e680_init(void) diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-asoc.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-asoc.patch new file mode 100644 index 0000000000..2226022a2c --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-asoc.patch @@ -0,0 +1,1302 @@ +Index: linux-2.6.23/sound/soc/codecs/pcap2.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/sound/soc/codecs/pcap2.c 2007-10-22 22:28:06.000000000 +0200 +@@ -0,0 +1,796 @@ ++/* ++ * pcap2.c - PCAP2 ASIC Audio driver ++ * ++ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/pm.h> ++#include <linux/platform_device.h> ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/soc.h> ++#include <sound/soc-dapm.h> ++#include <sound/initval.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx-pcap.h> ++#include <asm/arch/ezx.h> ++#include <asm/arch/hardware.h> ++ ++#include "pcap2.h" ++ ++#define AUDIO_NAME "pcap2-codec" ++#define PCAP2_VERSION "0.1" ++ ++extern int ezx_pcap_write(u_int8_t, u_int32_t); ++extern int ezx_pcap_read(u_int8_t, u_int32_t *); ++static struct snd_soc_device *pcap2_codec_socdev; ++ ++/* ++ * Debug ++ */ ++ ++//#define PCAP2_DEBUG ++ ++#ifdef PCAP2_DEBUG ++#define dbg(format, arg...) \ ++ printk(KERN_DEBUG AUDIO_NAME ": " format "\n" , ## arg) ++#else ++#define dbg(format, arg...) ++#endif ++ ++#define err(format, arg...) \ ++ printk(KERN_ERR AUDIO_NAME ": " format "\n" , ## arg) ++#define info(format, arg...) \ ++ printk(KERN_INFO AUDIO_NAME ": " format "\n" , ## arg) ++#define warn(format, arg...) \ ++ printk(KERN_WARNING AUDIO_NAME ": " format "\n" , ## arg) ++ ++#define dump_registers() pcap2_codec_read(NULL, 13); \ ++ pcap2_codec_read(NULL, 12); \ ++ pcap2_codec_read(NULL, 11); \ ++ pcap2_codec_read(NULL, 26); ++ ++ ++ ++ ++/* ++ * ASoC limits register value to 16 bits and pcap uses 32 bit registers ++ * to work around this, we get 16 bits from low, mid or high positions. ++ * ASoC limits register number to 8 bits we use 0x1f for register ++ * number and 0xe0 for register offset. -WM ++ */ ++static int pcap2_codec_write(struct snd_soc_codec *codec, unsigned int reg, ++ unsigned int value) ++{ ++ unsigned int tmp; ++ ++ ezx_pcap_read((reg & 0x1f), &tmp); ++ ++ if (reg & SL) { ++ tmp &= 0xffff0000; ++ tmp |= (value & 0xffff); ++ } ++ else if (reg & SM) { ++ tmp &= 0xff0000ff; ++ tmp |= ((value << 8) & 0x00ffff00); ++ } ++ else if (reg & SH) { ++ tmp &= 0xffff; ++ tmp |= ((value << 16) & 0xffff0000); ++ } ++ else ++ tmp = value; ++ ++ dbg("codec_write reg=%x, rval=%08x, fval=%08x", reg, tmp, value); ++ ezx_pcap_write((reg & 0x1f), tmp); ++ return 0; ++ ++} ++ ++static unsigned int pcap2_codec_read(struct snd_soc_codec *codec, unsigned int reg) ++{ ++ unsigned int tmp, ret; ++ ++ ezx_pcap_read((reg & 0x1f), &tmp); ++ ret = tmp; ++ if (reg & SL) ++ ret = (tmp & 0xffff); ++ else if (reg & SM) ++ ret = ((tmp >> 8) & 0xffff); ++ else if (reg & SH) ++ ret = ((tmp >> 16) & 0xffff); ++ ++ dbg("codec_read reg=%x, rval=%08x, fval=%08x", reg, tmp, ret); ++ return(ret); ++ ++} ++ ++static const char *pcap2_output_select[] = {"2ch", "2->1ch", "2->1ch -3db", "2->1ch -6db"}; ++ ++static const struct soc_enum pcap2_enum[] = { ++SOC_ENUM_SINGLE((PCAP2_OUTPUT_AMP|SH), 3, 4, pcap2_output_select), ++}; ++ ++static const struct snd_kcontrol_new pcap2_input_mixer_controls[] = { ++SOC_DAPM_SINGLE("A3 Switch", (PCAP2_INPUT_AMP|SL), 6, 1, 0), ++SOC_DAPM_SINGLE("A5 Switch", (PCAP2_INPUT_AMP|SL), 8, 1, 0), ++}; ++ ++static const struct snd_kcontrol_new pcap2_output_mixer_controls[] = { ++SOC_DAPM_SINGLE("A1 Switch", (PCAP2_OUTPUT_AMP|SL), 0, 1, 0), ++SOC_DAPM_SINGLE("A2 Switch", (PCAP2_OUTPUT_AMP|SL), 1, 1, 0), ++SOC_DAPM_SINGLE("AR Switch", (PCAP2_OUTPUT_AMP|SL), 5, 1, 0), ++SOC_DAPM_SINGLE("AL Switch", (PCAP2_OUTPUT_AMP|SL), 6, 1, 0), ++}; ++ ++/* pcap2 codec non DAPM controls */ ++static const struct snd_kcontrol_new pcap2_codec_snd_controls[] = { ++SOC_SINGLE("Output gain", (PCAP2_OUTPUT_AMP|SM), 5, 15, 0), ++SOC_SINGLE("Input gain", (PCAP2_INPUT_AMP|SL), 0, 31, 0), ++}; ++ ++static const struct snd_kcontrol_new pcap2_codec_dm_mux_control[] = { ++ SOC_DAPM_ENUM("Output Mode", pcap2_enum[0]), ++}; ++ ++/* add non dapm controls */ ++static int pcap2_codec_add_controls(struct snd_soc_codec *codec) ++{ ++ int err, i; ++ ++ for (i = 0; i < ARRAY_SIZE(pcap2_codec_snd_controls); i++) { ++ if ((err = snd_ctl_add(codec->card, ++ snd_soc_cnew(&pcap2_codec_snd_controls[i],codec, NULL))) < 0) ++ return err; ++ } ++ ++ return 0; ++} ++ ++/* pcap2 codec DAPM controls */ ++static const struct snd_soc_dapm_widget pcap2_codec_dapm_widgets[] = { ++ SND_SOC_DAPM_DAC("ST_DAC", "ST_DAC playback", SND_SOC_NOPM, 0, 0), ++ SND_SOC_DAPM_DAC("CDC_DAC", "CDC_DAC playback", SND_SOC_NOPM, 0, 0), ++ SND_SOC_DAPM_ADC("CDC_ADC", "CDC_DAC capture", SND_SOC_NOPM, 0, 0), ++ SND_SOC_DAPM_PGA("PGA_ST", (PCAP2_OUTPUT_AMP|SL), 9, 0, NULL, 0), ++ SND_SOC_DAPM_PGA("PGA_CDC", (PCAP2_OUTPUT_AMP|SL), 8, 0, NULL, 0), ++ SND_SOC_DAPM_PGA("PGA_R", (PCAP2_OUTPUT_AMP|SL), 11, 0, NULL, 0), ++ SND_SOC_DAPM_PGA("PGA_L", (PCAP2_OUTPUT_AMP|SL), 12, 0, NULL, 0), ++ SND_SOC_DAPM_MUX("Downmixer", SND_SOC_NOPM, 0, 0, pcap2_codec_dm_mux_control), ++ SND_SOC_DAPM_PGA("PGA_A1CTRL", (PCAP2_OUTPUT_AMP|SH), 1, 1, NULL, 0), ++ SND_SOC_DAPM_MIXER("Output Mixer", SND_SOC_NOPM, 0, 0, &pcap2_output_mixer_controls[0], ARRAY_SIZE(pcap2_output_mixer_controls)), ++ SND_SOC_DAPM_OUTPUT("A1"), /* Earpiece */ ++ SND_SOC_DAPM_OUTPUT("A2"), /* LoudSpeaker */ ++ SND_SOC_DAPM_OUTPUT("AR"), /* headset right */ ++ SND_SOC_DAPM_OUTPUT("AL"), /* headset left */ ++ ++ SND_SOC_DAPM_MICBIAS("BIAS1", (PCAP2_INPUT_AMP|SL), 10, 0), ++ SND_SOC_DAPM_MICBIAS("BIAS2", (PCAP2_INPUT_AMP|SL), 11, 0), ++ SND_SOC_DAPM_MIXER("Input Mixer", SND_SOC_NOPM, 0, 0, &pcap2_input_mixer_controls[0], ARRAY_SIZE(pcap2_input_mixer_controls)), ++ SND_SOC_DAPM_INPUT("A3"), /* Headset Mic */ ++ SND_SOC_DAPM_INPUT("A5"), /* Builtin Mic */ ++}; ++ ++static const char *audio_map[][3] = { ++ { "A1", NULL, "Output Mixer" }, ++ { "A2", NULL, "Output Mixer" }, ++ { "AR", NULL, "Output Mixer" }, ++ { "AL", NULL, "Output Mixer" }, ++ ++ { "Output Mixer", "A1 Switch", "PGA_A1CTRL" }, ++ { "Output Mixer", "A2 Switch", "Downmixer" }, ++ { "Output Mixer", "AR Switch", "PGA_R" }, ++ { "Output Mixer", "AL Switch", "PGA_L" }, ++ ++ { "PGA_A1CTRL", NULL, "Downmixer" }, ++ ++ { "Downmixer", "2->1ch", "PGA_L" }, ++ { "Downmixer", "2->1ch", "PGA_R" }, ++ { "Downmixer", "2->1ch -3db", "PGA_L" }, ++ { "Downmixer", "2->1ch -3db", "PGA_R" }, ++ { "Downmixer", "2->1ch -6db", "PGA_L" }, ++ { "Downmixer", "2->1ch -6db", "PGA_R" }, ++ { "Downmixer", "2ch", "PGA_R" }, ++ ++ { "PGA_R", NULL, "PGA_ST" }, ++ { "PGA_L", NULL, "PGA_ST" }, ++ { "PGA_R", NULL, "PGA_CDC" }, ++ ++ { "PGA_ST", NULL, "ST_DAC" }, ++ { "PGA_CDC", NULL, "CDC_DAC" }, ++ ++ /* input path */ ++ { "BIAS1", NULL, "A3" }, ++ { "BIAS2", NULL, "A5" }, ++ ++ { "Input Mixer", "A3 Switch", "BIAS1" }, ++ { "Input Mixer", "A5 Switch", "BIAS2" }, ++ ++ { "PGA_R", NULL, "Input Mixer" }, ++ ++ { "PGA_CDC", NULL, "PGA_R" }, ++ { "CDC_ADC", NULL, "PGA_CDC" }, ++ ++ /* terminator */ ++ {NULL, NULL, NULL}, ++}; ++ ++static int pcap2_codec_add_widgets(struct snd_soc_codec *codec) ++{ ++ int i; ++ ++ for(i = 0; i < ARRAY_SIZE(pcap2_codec_dapm_widgets); i++) { ++ snd_soc_dapm_new_control(codec, &pcap2_codec_dapm_widgets[i]); ++ } ++ ++ /* set up audio path interconnects */ ++ for(i = 0; audio_map[i][0] != NULL; i++) { ++ snd_soc_dapm_connect_input(codec, audio_map[i][0], ++ audio_map[i][1], audio_map[i][2]); ++ } ++ ++ snd_soc_dapm_new_widgets(codec); ++ return 0; ++} ++ ++static int pcap2_codec_dapm_event(struct snd_soc_codec *codec, int event) ++{ ++ unsigned int input = pcap2_codec_read(codec, PCAP2_INPUT_AMP); ++ ++ input &= ~PCAP2_INPUT_AMP_LOWPWR; ++ ++ switch (event) { ++ case SNDRV_CTL_POWER_D0: ++ case SNDRV_CTL_POWER_D1: ++ case SNDRV_CTL_POWER_D2: ++ case SNDRV_CTL_POWER_D3hot: /* Off, with power */ ++ dbg("dapm: ON\n"); ++ break; ++ case SNDRV_CTL_POWER_D3cold: /* Off, without power */ ++ input |= PCAP2_INPUT_AMP_LOWPWR; ++ dbg("dapm: OFF\n"); ++ break; ++ } ++ codec->dapm_state = event; ++ pcap2_codec_write(codec, PCAP2_INPUT_AMP, input); ++ return 0; ++} ++ ++static int pcap2_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_codec *codec = codec_dai->codec; ++ unsigned int tmp; ++ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ ++ tmp &= ~PCAP2_ST_DAC_RATE_MASK; ++ switch(params_rate(params)) { ++ case 8000: ++ break; ++ case 11025: ++ tmp |= PCAP2_ST_DAC_RATE_11025; ++ break; ++ case 12000: ++ tmp |= PCAP2_ST_DAC_RATE_12000; ++ break; ++ case 16000: ++ tmp |= PCAP2_ST_DAC_RATE_16000; ++ break; ++ case 22050: ++ tmp |= PCAP2_ST_DAC_RATE_22050; ++ break; ++ case 24000: ++ tmp |= PCAP2_ST_DAC_RATE_24000; ++ break; ++ case 32000: ++ tmp |= PCAP2_ST_DAC_RATE_32000; ++ break; ++ case 44100: ++ tmp |= PCAP2_ST_DAC_RATE_44100; ++ break; ++ case 48000: ++ tmp |= PCAP2_ST_DAC_RATE_48000; ++ break; ++ default: ++ return -EINVAL; ++ } ++ tmp |= PCAP2_ST_DAC_RESET_DF; ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ ++ tmp &= ~PCAP2_CODEC_RATE_MASK; ++ switch(params_rate(params)) { ++ case 8000: ++ break; ++ case 16000: ++ tmp |= PCAP2_CODEC_RATE_16000; ++ break; ++ default: ++ return -EINVAL; ++ } ++ tmp |= PCAP2_CODEC_RESET_DF; ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ ++ return 0; ++} ++ ++static int pcap2_hw_free(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_codec *codec = codec_dai->codec; ++ struct snd_soc_dapm_widget *w; ++ unsigned int tmp; ++ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0); ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ tmp &= ~(PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0); ++ else ++ snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0); ++ list_for_each_entry(w, &codec->dapm_widgets, list) { ++ if ((!strcmp(w->name, "CDC_DAC") || !strcmp(w->name, "CDC_ADC")) && w->connected) ++ goto in_use; ++ } ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ tmp &= ~(PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++in_use: ++ snd_soc_dapm_sync_endpoints(codec); ++ ++ return 0; ++} ++ ++static int pcap2_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, ++ int clk_id, unsigned int freq, int dir) ++{ ++ struct snd_soc_codec *codec = codec_dai->codec; ++ ++ unsigned int tmp; ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ /* ST_DAC */ ++ ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ ++ tmp &= ~PCAP2_ST_DAC_CLKSEL_MASK; ++ switch (clk_id) { ++ case PCAP2_CLK_AP: ++ tmp |= PCAP2_ST_DAC_CLKSEL_AP; ++ break; ++ case PCAP2_CLK_BP: ++ break; ++ default: ++ return -ENODEV; ++ } ++ ++ tmp &= ~PCAP2_ST_DAC_CLK_MASK; ++ switch (freq) { ++ case 13000000: ++ break; ++/* case 15M36: ++ tmp |= PCAP2_ST_DAC_CLK_15M36; ++ break; ++ case 16M8: ++ tmp |= PCAP2_ST_DAC_CLK_16M8; ++ break; ++ case 19M44: ++ tmp |= PCAP2_ST_DAC_CLK_19M44; ++ break; ++*/ case 26000000: ++ tmp |= PCAP2_ST_DAC_CLK_26M; ++ break; ++/* case EXT_MCLK: ++ tmp |= PCAP2_ST_DAC_CLK_MCLK; ++ break; ++ case FSYNC: ++ tmp |= PCAP2_ST_DAC_CLK_FSYNC; ++ break; ++ case BITCLK: ++ tmp |= PCAP2_ST_DAC_CLK_BITCLK; ++ break; ++*/ default: ++ return -EINVAL; ++ } ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ /* MONO_DAC */ ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ ++ tmp &= ~PCAP2_CODEC_CLKSEL_MASK; ++ switch (clk_id) { ++ case PCAP2_CLK_AP: ++ tmp |= PCAP2_CODEC_CLKSEL_AP; ++ break; ++ case PCAP2_CLK_BP: ++ break; ++ default: ++ return -ENODEV; ++ } ++ ++ tmp &= ~PCAP2_CODEC_CLK_MASK; ++ switch (freq) { ++ case 13000000: ++ break; ++/* case 15M36: ++ tmp |= PCAP2_CODEC_CLK_15M36; ++ break; ++ case 16M8: ++ tmp |= PCAP2_CODEC_CLK_16M8; ++ break; ++ case 19M44: ++ tmp |= PCAP2_CODEC_CLK_19M44; ++ break; ++*/ case 26000000: ++ tmp |= PCAP2_CODEC_CLK_26M; ++ break; ++ default: ++ return -EINVAL; ++ } ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ return 0; ++} ++ ++static int pcap2_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, ++ unsigned int fmt) ++{ ++ struct snd_soc_codec *codec = codec_dai->codec; ++ unsigned int tmp = 0; ++ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ /* ST_DAC */ ++ ++ /* disable CODEC */ ++ pcap2_codec_write(codec, PCAP2_CODEC, 0); ++ ++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBM_CFM: ++ break; ++ case SND_SOC_DAIFMT_CBS_CFS: ++ tmp |= 0x1; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_I2S: ++ tmp |= 0x4000; ++ break; ++/* case SND_SOC_NET: ++ tmp |= 0x2000; ++ break; ++*/ case SND_SOC_DAIFMT_DSP_B: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_IB_IF: ++ break; ++ case SND_SOC_DAIFMT_NB_NF: ++ tmp |= 0x60000; ++ break; ++ case SND_SOC_DAIFMT_IB_NF: ++ tmp |= 0x40000; ++ break; ++ case SND_SOC_DAIFMT_NB_IF: ++ tmp |= 0x20000; ++ break; ++ } ++ /* set dai to AP */ ++ tmp |= 0x1000; ++ ++ /* set BCLK */ ++ tmp |= 0x18000; ++ ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ /* MONO_DAC */ ++ ++ /* disable ST_DAC */ ++ pcap2_codec_write(codec, PCAP2_ST_DAC, 0); ++ ++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBM_CFM: ++ break; ++ case SND_SOC_DAIFMT_CBS_CFS: ++ tmp |= 0x2; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_DSP_B: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_IB_IF: ++ break; ++ case SND_SOC_DAIFMT_NB_NF: ++ tmp |= 0x600; ++ break; ++ case SND_SOC_DAIFMT_IB_NF: ++ tmp |= 0x400; ++ break; ++ case SND_SOC_DAIFMT_NB_IF: ++ tmp |= 0x200; ++ break; ++ } ++ if (codec_dai->id == PCAP2_MONO_DAI) ++ /* set dai to AP */ ++ tmp |= 0x8000; ++ ++ tmp |= 0x5; /* IHF / OHF */ ++ ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ return 0; ++} ++ ++static int pcap2_prepare(struct snd_pcm_substream *substream) ++{ ++ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_codec *codec = codec_dai->codec; ++ unsigned int tmp; ++ /* FIXME enable clock only if codec is master */ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ snd_soc_dapm_set_endpoint(codec, "ST_DAC", 1); ++ snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 0); ++ snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 0); ++ tmp = pcap2_codec_read(codec, PCAP2_ST_DAC); ++ tmp |= (PCAP2_ST_DAC_EN | PCAP2_ST_DAC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_ST_DAC, tmp); ++ } ++ else { ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ snd_soc_dapm_set_endpoint(codec, "CDC_DAC", 1); ++ else ++ snd_soc_dapm_set_endpoint(codec, "CDC_ADC", 1); ++ snd_soc_dapm_set_endpoint(codec, "ST_DAC", 0); ++ tmp = pcap2_codec_read(codec, PCAP2_CODEC); ++ tmp |= (PCAP2_CODEC_EN | PCAP2_CODEC_CLK_EN); ++ pcap2_codec_write(codec, PCAP2_CODEC, tmp); ++ } ++ snd_soc_dapm_sync_endpoints(codec); ++ mdelay(1); ++#ifdef PCAP2_DEBUG ++ dump_registers(); ++#endif ++ return 0; ++} ++ ++/* ++ * Define codec DAI. ++ */ ++struct snd_soc_codec_dai pcap2_dai[] = { ++{ ++ .name = "PCAP2 MONO", ++ .id = 0, ++ .playback = { ++ .stream_name = "CDC_DAC playback", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .capture = { ++ .stream_name = "CDC_DAC capture", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++ .prepare = pcap2_prepare, ++ .hw_params = pcap2_hw_params, ++ .hw_free = pcap2_hw_free, ++ }, ++ .dai_ops = { ++// .digital_mute = pcap2_mute, ++ .set_fmt = pcap2_set_dai_fmt, ++ .set_sysclk = pcap2_set_dai_sysclk, ++ }, ++}, ++{ ++ .name = "PCAP2 STEREO", ++ .id = 1, ++ .playback = { ++ .stream_name = "ST_DAC playback", ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | ++ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | ++ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | ++ SNDRV_PCM_RATE_48000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .capture = { /* FIXME: PCAP support this?? */ ++ .stream_name = "ST_DAC capture", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | ++ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | ++ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | ++ SNDRV_PCM_RATE_48000), ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++ .prepare = pcap2_prepare, ++ .hw_params = pcap2_hw_params, ++ .hw_free = pcap2_hw_free, ++ }, ++ .dai_ops = { ++// .digital_mute = pcap2_mute, ++ .set_fmt = pcap2_set_dai_fmt, ++ .set_sysclk = pcap2_set_dai_sysclk, ++ }, ++}, ++{ ++ .name = "PCAP2 BP", ++ .id = 2, ++ .playback = { ++ .stream_name = "BP playback", ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = SNDRV_PCM_RATE_8000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++ .prepare = pcap2_prepare, ++ .hw_params = pcap2_hw_params, ++ .hw_free = pcap2_hw_free, ++ }, ++ .dai_ops = { ++// .digital_mute = pcap2_mute, ++ .set_fmt = pcap2_set_dai_fmt, ++ .set_sysclk = pcap2_set_dai_sysclk, ++ }, ++}, ++}; ++EXPORT_SYMBOL_GPL(pcap2_dai); ++ ++static int pcap2_codec_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct snd_soc_codec *codec = socdev->codec; ++ ++ dbg("pcap2_codec_suspend"); ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold); ++ return 0; ++} ++ ++static int pcap2_codec_resume(struct platform_device *pdev) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct snd_soc_codec *codec = socdev->codec; ++ ++ dbg("pcap2_codec_resume"); ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot); ++ pcap2_codec_dapm_event(codec, codec->suspend_dapm_state); ++ return 0; ++} ++ ++/* ++ * initialise the PCAP2 driver ++ * register the mixer and dsp interfaces with the kernel ++ */ ++static int pcap2_codec_init(struct snd_soc_device *socdev) ++{ ++ struct snd_soc_codec *codec = socdev->codec; ++ int ret = 0; ++ ++ dbg("pcap2_codec_init"); ++ codec->name = "PCAP2 Audio"; ++ codec->owner = THIS_MODULE; ++ codec->read = pcap2_codec_read; ++ codec->write = pcap2_codec_write; ++ codec->dapm_event = pcap2_codec_dapm_event; ++ codec->dai = pcap2_dai; ++ codec->num_dai = ARRAY_SIZE(pcap2_dai); ++ ++ /* register pcms */ ++ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); ++ if (ret < 0) { ++ return ret; ++ } ++ /* power on device */ ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3hot); ++ /* set the update bits */ ++ ++ pcap2_codec_add_controls(codec); ++ pcap2_codec_add_widgets(codec); ++ ret = snd_soc_register_card(socdev); ++ if (ret < 0) { ++ snd_soc_free_pcms(socdev); ++ snd_soc_dapm_free(socdev); ++ } ++ ++ return ret; ++} ++ ++static int pcap2_codec_probe(struct platform_device *pdev) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct pcap2_codec_setup_data *setup; ++ struct snd_soc_codec *codec; ++ int ret = 0; ++ info("PCAP2 Audio Codec %s", PCAP2_VERSION); ++ ++ setup = socdev->codec_data; ++ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); ++ if (codec == NULL) ++ return -ENOMEM; ++ ++ socdev->codec = codec; ++ mutex_init(&codec->mutex); ++ INIT_LIST_HEAD(&codec->dapm_widgets); ++ INIT_LIST_HEAD(&codec->dapm_paths); ++ ++ pcap2_codec_socdev = socdev; ++ ++ ret = pcap2_codec_init(socdev); ++ return ret; ++} ++ ++/* power down chip and remove */ ++static int pcap2_codec_remove(struct platform_device *pdev) ++{ ++ struct snd_soc_device *socdev = platform_get_drvdata(pdev); ++ struct snd_soc_codec *codec = socdev->codec; ++ if (codec->control_data) ++ pcap2_codec_dapm_event(codec, SNDRV_CTL_POWER_D3cold); ++ snd_soc_free_pcms(socdev); ++ snd_soc_dapm_free(socdev); ++ ++ kfree(codec); ++ ++ return 0; ++} ++ ++/* codec device ops */ ++struct snd_soc_codec_device soc_codec_dev_pcap2 = { ++ .probe = pcap2_codec_probe, ++ .remove = pcap2_codec_remove, ++ .suspend = pcap2_codec_suspend, ++ .resume = pcap2_codec_resume, ++}; ++ ++EXPORT_SYMBOL_GPL(soc_codec_dev_pcap2); ++ ++MODULE_DESCRIPTION("ASoC PCAP2 codec"); ++MODULE_AUTHOR("Daniel Ribeiro"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/sound/soc/codecs/pcap2.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/sound/soc/codecs/pcap2.h 2007-10-22 22:28:06.000000000 +0200 +@@ -0,0 +1,81 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#ifndef _PCAP2_H ++#define _PCAP2_H ++ ++/* 16 bit reads/writes on pcap registers (ugly workaround) */ ++#define SL (1 << 5) /* lower 16 bits */ ++#define SM (1 << 6) /* mid 16 bits */ ++#define SH (1 << 7) /* higher 16 bits */ ++ ++/* PCAP2 register space */ ++#define PCAP2_CODEC 0x0b ++#define PCAP2_OUTPUT_AMP 0x0c ++#define PCAP2_ST_DAC 0x0d ++#define PCAP2_INPUT_AMP 0x1a ++ ++#define PCAP2_MONO_DAI 0 ++#define PCAP2_STEREO_DAI 1 ++#define PCAP2_BP_DAI 2 ++ ++#define PCAP2_CLK_BP 0 ++#define PCAP2_CLK_AP 1 ++ ++#define PCAP2_CODEC_EN 0x2000 ++#define PCAP2_CODEC_CLK_EN 0x1000 ++#define PCAP2_CODEC_RESET_DF 0x800 ++#define PCAP2_CODEC_RATE_MASK 0x4000 ++#define PCAP2_CODEC_RATE_8000 0x0 ++#define PCAP2_CODEC_RATE_16000 0x4000 ++#define PCAP2_CODEC_CLKSEL_MASK 0x10000 ++#define PCAP2_CODEC_CLKSEL_AP 0x10000 ++#define PCAP2_CODEC_CLKSEL_BP 0x0 ++#define PCAP2_CODEC_CLK_MASK 0x1c0 ++#define PCAP2_CODEC_CLK_13M 0x0 ++#define PCAP2_CODEC_CLK_15M36 0x40 ++#define PCAP2_CODEC_CLK_16M8 0x80 ++#define PCAP2_CODEC_CLK_19M44 0xc0 ++#define PCAP2_CODEC_CLK_26M 0x100 ++ ++#define PCAP2_ST_DAC_EN 0x80 ++#define PCAP2_ST_DAC_CLK_EN 0x20 ++#define PCAP2_ST_DAC_RESET_DF 0x40 ++#define PCAP2_ST_DAC_RATE_MASK 0xf00 ++#define PCAP2_ST_DAC_RATE_8000 0x0 ++#define PCAP2_ST_DAC_RATE_11025 0x100 ++#define PCAP2_ST_DAC_RATE_12000 0x200 ++#define PCAP2_ST_DAC_RATE_16000 0x300 ++#define PCAP2_ST_DAC_RATE_22050 0x400 ++#define PCAP2_ST_DAC_RATE_24000 0x500 ++#define PCAP2_ST_DAC_RATE_32000 0x600 ++#define PCAP2_ST_DAC_RATE_44100 0x700 ++#define PCAP2_ST_DAC_RATE_48000 0x800 ++#define PCAP2_ST_DAC_CLKSEL_MASK 0x80000 ++#define PCAP2_ST_DAC_CLKSEL_AP 0x80000 ++#define PCAP2_ST_DAC_CLKSEL_BP 0x0 ++#define PCAP2_ST_DAC_CLK_MASK 0x1c ++#define PCAP2_ST_DAC_CLK_13M 0x0 ++#define PCAP2_ST_DAC_CLK_15M36 0x4 ++#define PCAP2_ST_DAC_CLK_16M8 0x8 ++#define PCAP2_ST_DAC_CLK_19M44 0xc ++#define PCAP2_ST_DAC_CLK_26M 0x10 ++#define PCAP2_ST_DAC_CLK_MCLK 0x14 ++#define PCAP2_ST_DAC_CLK_FSYNC 0x18 ++#define PCAP2_ST_DAC_CLK_BITCLK 0x1c ++ ++#define PCAP2_INPUT_AMP_LOWPWR 0x80000 ++#define PCAP2_INPUT_AMP_V2EN2 0x200000 ++ ++#define PCAP2_OUTPUT_AMP_PGAR_EN 0x800 ++#define PCAP2_OUTPUT_AMP_PGAL_EN 0x1000 ++#define PCAP2_OUTPUT_AMP_CDC_SW 0x100 ++#define PCAP2_OUTPUT_AMP_ST_DAC_SW 0x200 ++ ++extern struct snd_soc_codec_dai pcap2_dai[]; ++extern struct snd_soc_codec_device soc_codec_dev_pcap2; ++ ++#endif +Index: linux-2.6.23/sound/soc/pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/sound/soc/pxa/Kconfig 2007-10-22 22:27:11.000000000 +0200 ++++ linux-2.6.23/sound/soc/pxa/Kconfig 2007-10-22 22:29:23.000000000 +0200 +@@ -57,3 +57,12 @@ + help + Say Y if you want to add support for SoC audio on Sharp + Zaurus SL-C6000x models (Tosa). ++ ++config SND_PXA2XX_SOC_EZX ++ tristate "SoC Audio support for EZX" ++ depends on SND_PXA2XX_SOC && PXA_EZX ++ select SND_PXA2XX_SOC_SSP ++ select SND_SOC_PCAP2 ++ help ++ Say Y if you want to add support for SoC audio on ++ Motorola EZX Phones (a780/e680). +Index: linux-2.6.23/sound/soc/pxa/ezx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/sound/soc/pxa/ezx.c 2007-10-22 22:28:06.000000000 +0200 +@@ -0,0 +1,349 @@ ++/* ++ * ezx.c - Machine specific code for EZX phones ++ * ++ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/timer.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/soc.h> ++#include <sound/soc-dapm.h> ++ ++#include <asm/mach-types.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/hardware.h> ++ ++#include <asm/arch/ezx-pcap.h> ++ ++#include "../codecs/pcap2.h" ++#include "pxa2xx-pcm.h" ++#include "pxa2xx-ssp.h" ++ ++#define GPIO_HW_ATTENUATE_A780 96 ++ ++static struct snd_soc_codec *control_codec; ++ ++static void ezx_ext_control(struct snd_soc_codec *codec) ++{ ++ if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_A1))) ++ snd_soc_dapm_set_endpoint(codec, "Headset", 1); ++ else ++ snd_soc_dapm_set_endpoint(codec, "Headset", 0); ++ if (ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_MB2))) ++ snd_soc_dapm_set_endpoint(codec, "External Mic", 1); ++ else ++ snd_soc_dapm_set_endpoint(codec, "External Mic", 0); ++ ++ snd_soc_dapm_sync_endpoints(codec); ++} ++ ++static irqreturn_t jack_irq(int irq, void *data) ++{ ++ ezx_ext_control(control_codec); ++ return IRQ_HANDLED; ++} ++ ++ ++/* ++ * Alsa operations ++ * Only implement the required operations for your platform. ++ * These operations are specific to the machine only. ++ */ ++ ++ /* ++ * Called by ALSA when a PCM substream is opened, private data can be allocated. ++ */ ++static int ezx_machine_startup(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec *codec = rtd->socdev->codec; ++ ++ /* check the jack status at stream startup */ ++ ezx_ext_control(codec); ++ return 0; ++} ++ ++/* ++ * Called by ALSA when the hardware params are set by application. This ++ * function can also be called multiple times and can allocate buffers ++ * (using snd_pcm_lib_* ). It's non-atomic. ++ */ ++static int ezx_machine_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret; ++ ++ /* set codec DAI configuration */ ++ if (codec_dai->id == PCAP2_STEREO_DAI) ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM); ++ else ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if(ret < 0) ++ return ret; ++ ++ /* Turn on clock output on CLK_PIO */ ++ OSCC |= 0x8; ++ ++ /* set clock source */ ++ ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_AP, ++ 13000000, SND_SOC_CLOCK_IN); ++ if(ret < 0) ++ return ret; ++ ++ /* set cpu DAI configuration */ ++ ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if (ret < 0) ++ return ret; ++ ++ ret = cpu_dai->dai_ops.set_tristate(cpu_dai, 0); ++ if (ret < 0) ++ return ret; ++ ++ ret = cpu_dai->dai_ops.set_sysclk(cpu_dai,PXA2XX_SSP_CLK_EXT, ++ 0, SND_SOC_CLOCK_IN); ++ if (ret < 0) ++ return ret; ++ ++ return 0; ++} ++ ++/* ++ * Free's resources allocated by hw_params, can be called multiple times ++ */ ++static int ezx_machine_hw_free(struct snd_pcm_substream *substream) ++{ ++ OSCC &= ~0x8; /* turn off clock output on CLK_PIO */ ++ ++ return 0; ++} ++ ++static int ezx_machine_prepare(struct snd_pcm_substream *substream) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++ struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ ++ if (codec_dai->id == PCAP2_STEREO_DAI) { ++ /* override pxa2xx-ssp sample size for stereo/network mode */ ++ SSCR0_P(cpu_dai->id+1) &= ~(SSCR0_DSS | SSCR0_EDSS); ++ SSCR0_P(cpu_dai->id+1) |= (SSCR0_EDSS | SSCR0_DataSize(16)); ++ } ++ return 0; ++} ++ ++/* machine Alsa PCM operations */ ++static struct snd_soc_ops ezx_ops = { ++ .startup = ezx_machine_startup, ++ .prepare = ezx_machine_prepare, ++ .hw_free = ezx_machine_hw_free, ++ .hw_params = ezx_machine_hw_params, ++}; ++ ++static int bp_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params) ++{ ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai; ++// struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai; ++ int ret = 0; ++ /* set codec DAI configuration */ ++ ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | ++ SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM); ++ if(ret < 0) ++ return ret; ++ ++ /* set clock source */ ++ ret = codec_dai->dai_ops.set_sysclk(codec_dai, PCAP2_CLK_BP, ++ 13000000, SND_SOC_CLOCK_IN); ++ ++ return ret; ++} ++ ++ ++ ++/* machine dapm widgets */ ++static const struct snd_soc_dapm_widget ezx_dapm_widgets[] = { ++ SND_SOC_DAPM_HP("Headset", NULL), ++ SND_SOC_DAPM_SPK("Earpiece", NULL), ++ SND_SOC_DAPM_SPK("Loudspeaker", NULL), ++ SND_SOC_DAPM_MIC("Built-in Mic", NULL), ++ SND_SOC_DAPM_MIC("External Mic", NULL), ++}; ++ ++/* machine audio map (connections to the codec pins) */ ++static const char *audio_map[][3] = { ++ { "Headset", NULL, "AR" }, ++ { "Headset", NULL, "AL" }, ++ { "Earpiece", NULL, "A1" }, ++ { "Loudspeaker", NULL, "A2" }, ++ ++ { "Built-in Mic", NULL, "A5" }, ++ { "External Mic", NULL, "A3" }, ++ ++ {NULL, NULL, NULL}, ++}; ++ ++/* ++ * Initialise the machine audio subsystem. ++ */ ++static int ezx_machine_init(struct snd_soc_codec *codec) ++{ ++ int i; ++ /* mark unused codec pins as NC */ ++// snd_soc_dapm_set_endpoint(codec, "FIXME", 0); ++ control_codec = codec; ++ ++ /* Add ezx specific controls */ ++// for (i = 0; i < ARRAY_SIZE(ezx_controls); i++) { ++// if ((err = snd_ctl_add(codec->card, snd_soc_cnew(&ezx_controls[i], codec, NULL))) < 0) ++// return err; ++// } ++ ++ /* Add ezx specific widgets */ ++ for(i = 0; i < ARRAY_SIZE(ezx_dapm_widgets); i++) { ++ snd_soc_dapm_new_control(codec, &ezx_dapm_widgets[i]); ++ } ++ /* Set up ezx specific audio path interconnects */ ++ for(i = 0; audio_map[i][0] != NULL; i++) { ++ snd_soc_dapm_connect_input(codec, audio_map[i][0], audio_map[i][1], audio_map[i][2]); ++ } ++ ++ /* synchronise subsystem */ ++ snd_soc_dapm_sync_endpoints(codec); ++ return 0; ++} ++ ++static struct snd_soc_cpu_dai bp_dai = ++{ ++ .name = "Baseband", ++ .id = 0, ++ .type = SND_SOC_DAI_PCM, ++ .playback = { ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = SNDRV_PCM_RATE_8000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .capture = { ++ .channels_min = 1, ++ .channels_max = 1, ++ .rates = SNDRV_PCM_RATE_8000, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE, ++ }, ++ .ops = { ++// .startup = bp_startup, ++// .shutdown = bp_shutdown, ++ .hw_params = bp_hw_params, ++// .hw_free = bp_hw_free, ++ }, ++}; ++ ++/* template digital audio interface glue - connects codec <--> CPU */ ++static struct snd_soc_dai_link ezx_dai[] = { ++{ ++ .name = "PCAP2 STEREO", ++ .stream_name = "stereo playback", ++ .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3], ++ .codec_dai = &pcap2_dai[PCAP2_STEREO_DAI], ++ .init = ezx_machine_init, ++ .ops = &ezx_ops, ++}, ++{ ++ .name = "PCAP2 MONO", ++ .stream_name = "mono playback", ++ .cpu_dai = &pxa_ssp_dai[PXA2XX_DAI_SSP3], ++ .codec_dai = &pcap2_dai[PCAP2_MONO_DAI], ++// .init = ezx_machine_init, /* the stereo call already registered our controls */ ++ .ops = &ezx_ops, ++}, ++{ ++ .name = "PCAP2 BP", ++ .stream_name = "BP Audio", ++ .cpu_dai = &bp_dai, ++ .codec_dai = &pcap2_dai[PCAP2_BP_DAI], ++}, ++}; ++ ++/* template audio machine driver */ ++static struct snd_soc_machine snd_soc_machine_ezx = { ++ .name = "Motorola EZX", ++// .probe ++// .remove ++// .suspend_pre ++// .resume_post ++ .dai_link = ezx_dai, ++ .num_links = ARRAY_SIZE(ezx_dai), ++}; ++ ++/* template audio subsystem */ ++static struct snd_soc_device ezx_snd_devdata = { ++ .machine = &snd_soc_machine_ezx, ++ .platform = &pxa2xx_soc_platform, ++ .codec_dev = &soc_codec_dev_pcap2, ++}; ++ ++static struct platform_device *ezx_snd_device; ++ ++static int __init ezx_init(void) ++{ ++ int ret; ++ ezx_snd_device = platform_device_alloc("soc-audio", -1); ++ if (!ezx_snd_device) ++ return -ENOMEM; ++ ++ platform_set_drvdata(ezx_snd_device, &ezx_snd_devdata); ++ ezx_snd_devdata.dev = &ezx_snd_device->dev; ++ ret = platform_device_add(ezx_snd_device); ++ ++ if (ret) ++ platform_device_put(ezx_snd_device); ++ /* configure gpio for ssp3 */ ++ pxa_gpio_mode(GPIO83_SFRM3_MD); /* SFRM */ ++ pxa_gpio_mode(GPIO81_STXD3_MD); /* TXD */ ++ pxa_gpio_mode(GPIO52_SCLK3_MD); /* SCLK */ ++ pxa_gpio_mode(GPIO89_SRXD3_MD); /* RXD */ ++ ++ /* configure gpio for ssp2 */ ++ pxa_gpio_mode(37 | GPIO_IN); /* SFRM */ ++ pxa_gpio_mode(38 | GPIO_IN); /* TXD */ ++ pxa_gpio_mode(22 | GPIO_IN); /* SCLK */ ++ pxa_gpio_mode(88 | GPIO_IN); /* RXD */ ++ ++ pxa_gpio_mode(GPIO_HW_ATTENUATE_A780 | GPIO_OUT); ++ pxa_gpio_set_value(GPIO_HW_ATTENUATE_A780, 1); ++ ++ /* request jack irq */ ++ request_irq(EZX_IRQ_HEADJACK, &jack_irq, IRQF_DISABLED, "headphone jack", NULL); ++ request_irq(EZX_IRQ_MIC, &jack_irq, IRQF_DISABLED, "mic jack", NULL); ++ ++ return ret; ++} ++ ++static void __exit ezx_exit(void) ++{ ++ free_irq(EZX_IRQ_HEADJACK, NULL); ++ free_irq(EZX_IRQ_MIC, NULL); ++ platform_device_unregister(ezx_snd_device); ++} ++ ++module_init(ezx_init); ++module_exit(ezx_exit); ++ +Index: linux-2.6.23/sound/soc/codecs/Makefile +=================================================================== +--- linux-2.6.23.orig/sound/soc/codecs/Makefile 2007-10-10 09:38:42.000000000 +0200 ++++ linux-2.6.23/sound/soc/codecs/Makefile 2007-10-22 22:30:09.000000000 +0200 +@@ -3,9 +3,11 @@ + snd-soc-wm8750-objs := wm8750.o + snd-soc-wm8753-objs := wm8753.o + snd-soc-wm9712-objs := wm9712.o ++snd-soc-pcap2-objs := pcap2.o + + obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o + obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o + obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o + obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o + obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o ++obj-$(CONFIG_SND_SOC_PCAP2) += snd-soc-pcap2.o +Index: linux-2.6.23/sound/soc/codecs/Kconfig +=================================================================== +--- linux-2.6.23.orig/sound/soc/codecs/Kconfig 2007-10-10 09:38:42.000000000 +0200 ++++ linux-2.6.23/sound/soc/codecs/Kconfig 2007-10-22 22:28:06.000000000 +0200 +@@ -17,3 +17,7 @@ + config SND_SOC_WM9712 + tristate + depends on SND_SOC ++ ++config SND_SOC_PCAP2 ++ tristate ++ depends on SND_SOC && EZX_PCAP +Index: linux-2.6.23/sound/soc/pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/sound/soc/pxa/Makefile 2007-10-22 22:27:11.000000000 +0200 ++++ linux-2.6.23/sound/soc/pxa/Makefile 2007-10-22 22:28:06.000000000 +0200 +@@ -14,9 +14,10 @@ + snd-soc-poodle-objs := poodle.o + snd-soc-tosa-objs := tosa.o + snd-soc-spitz-objs := spitz.o ++snd-soc-ezx-objs := ezx.o + + obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o + obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o + obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o + obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o +- ++obj-$(CONFIG_SND_PXA2XX_SOC_EZX) += snd-soc-ezx.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-backlight.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-backlight.patch new file mode 100644 index 0000000000..b6bd9ff4f0 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-backlight.patch @@ -0,0 +1,203 @@ + +# +# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher +# + +Index: linux-2.6.23/drivers/video/backlight/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/video/backlight/Kconfig 2007-10-10 09:38:43.000000000 +0200 ++++ linux-2.6.23/drivers/video/backlight/Kconfig 2007-10-22 22:25:23.000000000 +0200 +@@ -77,3 +77,12 @@ + help + If you have a Intel LE80578 (Carillo Ranch) say Y to enable the + backlight driver. ++ ++config BACKLIGHT_EZX ++ tristate "Motorola EXZ Backlight Driver (A780/E680/E680i)" ++ depends on BACKLIGHT_CLASS_DEVICE && PXA_EZX ++ default y ++ help ++ If you have a Motorola A780 or E680(i), say y to enable the ++ backlight driver. ++ +Index: linux-2.6.23/drivers/video/backlight/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/video/backlight/Makefile 2007-10-10 09:38:43.000000000 +0200 ++++ linux-2.6.23/drivers/video/backlight/Makefile 2007-10-22 22:25:50.000000000 +0200 +@@ -7,3 +7,4 @@ + obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o + obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o + obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o ++obj-$(CONFIG_BACKLIGHT_EZX) += ezx_bl.o +Index: linux-2.6.23/drivers/video/backlight/ezx_bl.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/video/backlight/ezx_bl.c 2007-10-22 22:25:23.000000000 +0200 +@@ -0,0 +1,142 @@ ++/* ++ * Backlight Driver for Motorola A780 and E680(i) GSM Phones. ++ * ++ * Copyright 2006 Vanille Media ++ * ++ * Author: Michael Lauer <mickey@Vanille.de> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++#include <linux/backlight.h> ++ ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx.h> ++ ++#define EZX_MIN_INTENSITY 0 ++#define EZX_MAX_INTENSITY 50 ++#define EZX_DEFAULT_INTENSITY 30 ++ ++static struct backlight_device *ezx_backlight_device; ++static int last_intensity; ++static int suspended; ++ ++static int ezxbl_send_intensity(struct backlight_device *bd) ++{ ++ int intensity = bd->props.brightness; ++ ++ if (suspended || bd->props.power != FB_BLANK_UNBLANK || ++ bd->props.fb_blank != FB_BLANK_UNBLANK) ++ intensity = 0; ++ ++ if ( !last_intensity && intensity ) { ++ PWM_CTRL0 = 2; /* pre-scaler */ ++ PWM_PWDUTY0 = intensity; /* duty cycle */ ++ PWM_PERVAL0 = 49; /* period */ ++ pxa_gpio_mode(GPIO16_PWM0_MD); /* set GPIO16 as alternate function + output */ ++ pxa_set_cken(CKEN_PWM0, 1); /* clock enable */ ++ } ++ else if ( last_intensity && !intensity ) { ++ PWM_PWDUTY0 = 0; ++ GAFR0_U &= 0xFFFFFFFC; /* ??? */ ++ pxa_set_cken(CKEN_PWM0, 0); /* clock disable */ ++ pxa_gpio_mode(GPIO16_PWM0); /* set GPIO16 as input */ ++ } else if ( last_intensity && intensity ) { ++ PWM_PWDUTY0 = intensity; /* duty cycle */ ++ } ++ last_intensity = intensity; ++ return 0; ++} ++ ++static int ezxbl_get_intensity(struct backlight_device *bd) ++{ ++ return last_intensity; ++} ++ ++static int ezxbl_set_intensity(struct backlight_device *bd) ++{ ++ return ezxbl_send_intensity(ezx_backlight_device); ++} ++ ++#ifdef CONFIG_PM ++static int ezxbl_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ suspended = 1; ++ ezxbl_set_intensity(ezx_backlight_device); ++ return 0; ++} ++ ++static int ezxbl_resume(struct platform_device *pdev) ++{ ++ suspended = 0; ++ ezxbl_set_intensity(ezx_backlight_device); ++ return 0; ++} ++#else ++#define ezxbl_suspend NULL ++#define ezxbl_resume NULL ++#endif ++ ++static struct backlight_ops ezxbl_ops = { ++ .get_brightness = ezxbl_get_intensity, ++ .update_status = ezxbl_set_intensity, ++}; ++ ++static int __init ezxbl_probe(struct platform_device *pdev) ++{ ++ ezx_backlight_device = backlight_device_register ("ezx-bl", ++ &pdev->dev, NULL, &ezxbl_ops); ++ if (IS_ERR (ezx_backlight_device)) ++ return PTR_ERR (ezx_backlight_device); ++ ++ platform_set_drvdata(pdev, ezx_backlight_device); ++ ++ ezx_backlight_device->props.power = FB_BLANK_UNBLANK; ++ ezx_backlight_device->props.max_brightness = EZX_MAX_INTENSITY; ++ ezx_backlight_device->props.brightness = EZX_DEFAULT_INTENSITY; ++ ezxbl_set_intensity(ezx_backlight_device); ++ backlight_update_status(ezx_backlight_device); ++ ++ return 0; ++} ++ ++static int ezxbl_remove(struct platform_device *pdev) ++{ ++ backlight_device_unregister(ezx_backlight_device); ++ return 0; ++} ++ ++static struct platform_driver ezxbl_driver = { ++ .probe = ezxbl_probe, ++ .remove = ezxbl_remove, ++ .suspend = ezxbl_suspend, ++ .resume = ezxbl_resume, ++ .driver = { ++ .name = "ezx-bl", ++ }, ++}; ++ ++static int __init ezxbl_init(void) ++{ ++ return platform_driver_register(&ezxbl_driver); ++} ++ ++static void __exit ezxbl_exit(void) ++{ ++ platform_driver_unregister(&ezxbl_driver); ++} ++ ++module_init(ezxbl_init); ++module_exit(ezxbl_exit); ++ ++MODULE_AUTHOR("Michael Lauer <mickey@Vanille.de>"); ++MODULE_DESCRIPTION("Backlight Driver for Motorola A780|E680(i)"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/ezx.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx.c 2007-10-22 22:03:08.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx.c 2007-10-22 22:25:23.000000000 +0200 +@@ -65,6 +65,12 @@ + #endif + EXPORT_SYMBOL(ezx_backlight_power); + ++/* EZX LCD Backlight */ ++static struct platform_device ezxbacklight_device = { ++ .name = "ezx-bl", ++ .id = -1, ++}; ++ + /* OHCI Controller */ + static int ezx_ohci_init(struct device *dev) + { +@@ -121,6 +127,7 @@ + + static struct platform_device *devices[] __initdata = { + &ezxbp_device, ++ &ezxbacklight_device, + }; + + /* PM */ diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-bp.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-bp.patch new file mode 100644 index 0000000000..a20adc464c --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-bp.patch @@ -0,0 +1,340 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx.c 2007-10-23 12:03:55.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx.c 2007-10-23 13:21:24.000000000 +0200 +@@ -86,8 +86,40 @@ + .init = ezx_ohci_init, + }; + ++/* BP */ ++static struct resource ezxbp_resources[] = { ++ [0] = { ++ .start = IRQ_GPIO(GPIO_BP_RDY), ++ .end = IRQ_GPIO(GPIO_BP_RDY), ++ .flags = IORESOURCE_IRQ, ++ }, ++ [1] = { ++ .start = IRQ_GPIO(GPIO_BB_WDI2), ++ .end = IRQ_GPIO(GPIO_BB_WDI2), ++ .flags = IORESOURCE_IRQ, ++ }, ++ [2] = { ++ .start = IRQ_GPIO(GPIO_BB_WDI), ++ .end = IRQ_GPIO(GPIO_BB_WDI), ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device ezxbp_device = { ++ .name = "ezx-bp", ++ .dev = { ++ //.parent = ++ //.platform_data = ++ }, ++ .id = -1, ++ .num_resources = ARRAY_SIZE(ezxbp_resources), ++ .resource = ezxbp_resources, ++}; ++ ++ + + static struct platform_device *devices[] __initdata = { ++ &ezxbp_device, + }; + + static int __init ezx_init(void) +Index: linux-2.6.23/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Kconfig 2007-10-23 12:03:55.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Kconfig 2007-10-23 13:21:23.000000000 +0200 +@@ -106,6 +106,9 @@ + + endchoice + ++config EZX_BP ++ bool "BP Control code for EZX Platform" ++ + endif + + endmenu +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-bp.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-bp.c 2007-10-23 13:22:01.000000000 +0200 +@@ -0,0 +1,264 @@ ++/* ++ * BP handshake code for Motorola EZX phones ++ * ++ * Copyright (c) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * ++ * Based on Motorola's a780.c Copyright (c) 2003-2005 Motorola ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++ ++#include <linux/kernel.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/mach/irq.h> ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++ ++#include <asm/arch/ezx.h> ++ ++/* BP Handshake */ ++#define FIRST_STEP 2 ++#define LAST_STEP 3 ++#define BP_RDY_TIMEOUT 0x000c0000 ++ ++#if 1 ++#define DEBUGP(x, args ...) printk(x, ##args) ++#else ++#define DEBUGP(x, args ...) ++#endif ++ ++extern void usb_send_readurb(void); ++ ++struct bp { ++ int irq_wdi; ++ int irq_wdi2; ++ int irq_rdy; ++}; ++ ++/* check power down condition */ ++static inline void check_power_off(void) ++{ ++ if (pxa_gpio_get_value(GPIO_BB_WDI2) == 0) { ++ DEBUGP("BP request poweroff!\n"); ++ /* ++ * It is correct to power off here, the following line is ++ * commented out because e680 lowers WDI2 when BP is in ++ * flash mode, otherwise WDI2 is used to detect low ++ * battery. You can safely uncomment this line if you are ++ * using this kernel with BP in normal mode. ++ */ ++#ifndef CONFIG_PXA_EZX_E680 ++ pm_power_off(); ++#endif ++ } ++} ++ ++static int step = FIRST_STEP; ++ ++inline int bp_handshake_passed(void) ++{ ++ return (step > LAST_STEP); ++} ++EXPORT_SYMBOL(bp_handshake_passed); ++ ++void handshake(void) ++{ ++ /* step 1: check MCU_INT_SW or BP_RDY is low (now it is checked in apboot) */ ++ DEBUGP("bp handshake entered!\n"); ++ if (step == 1) { ++ int timeout = BP_RDY_TIMEOUT; ++ ++ /* config MCU_INT_SW, BP_RDY as input */ ++ pxa_gpio_mode(GPIO_MCU_INT_SW | GPIO_IN); ++ pxa_gpio_mode(GPIO_BP_RDY | GPIO_IN); ++ ++ while (timeout--) { ++ if (pxa_gpio_get_value(GPIO_MCU_INT_SW) == 0 ++ || pxa_gpio_get_value(GPIO_BP_RDY) == 0) { ++ step ++; ++ break; ++ } ++ ++ check_power_off(); ++ } ++ DEBUGP("ezx-bp: handshake step 1\n"); ++ } ++ ++ /* step 2: wait BP_RDY is low */ ++ if (step == 2) { ++ if (pxa_gpio_get_value(GPIO_BP_RDY) == 0) { ++ /* config MCU_INT_SW as output */ ++ pxa_gpio_mode(GPIO_MCU_INT_SW | GPIO_OUT); ++ pxa_gpio_set_value(GPIO_MCU_INT_SW, 0); ++ ++ step ++; ++ DEBUGP("ezx-bp: handshake step 2\n"); ++ } ++ } ++ ++ /* step 3: wait BP_RDY is high */ ++ else if (step == 3) { ++ if (pxa_gpio_get_value(GPIO_BP_RDY)) { ++ step ++; ++ //FIXME delay_bklight(); ++ pxa_gpio_set_value(GPIO_MCU_INT_SW, 1); ++ printk(KERN_NOTICE "ezx-bp: handshake passed\n"); ++ } ++ } ++} ++ ++irqreturn_t bp_wdi_handler(int irq, void *dev_id) ++{ ++ DEBUGP("BP Lowered WDI line. This is not good :(\n"); ++ /* ++ * this means that BP is not responsive. ++ * we could try to reset BP and then handshake again ++ * but i doubt its possible to bring it up again. ++ */ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t bp_rdy_handler(int irq, void *dev_id) ++{ ++ struct bp *bp = dev_id; ++ DEBUGP("BP rdy irq\n"); ++ if (!bp_handshake_passed()) { ++ handshake(); ++ if (bp_handshake_passed()) { ++ /* FIXME: (test) try to not disable irq_wdi2 and drain battery */ ++ disable_irq(bp->irq_wdi2); ++ ++ /* set bp_rdy handle for usb ipc */ ++ set_irq_type(bp->irq_rdy, IRQT_FALLING); ++ } ++ } ++#ifdef CONFIG_TS0710_MUX_USB ++ else usb_send_readurb(); ++#endif ++ return IRQ_HANDLED; ++} ++ ++/* BP request for poweroff */ ++static irqreturn_t bp_wdi2_handler(int irq, void *dev_id) ++{ ++ DEBUGP("BP request poweroff!\n"); ++ /* same case as check_power_off() */ ++#ifndef CONFIG_PXA_EZX_E680 ++ pm_power_off(); ++#endif ++ return IRQ_HANDLED; ++} ++ ++static int __init ezxbp_probe(struct platform_device *dev) ++{ ++ int ret; ++ struct bp *bp; ++ ++ bp = kzalloc(sizeof(*bp), GFP_KERNEL); ++ if (!bp) ++ return -ENOMEM; ++ ++ bp->irq_rdy = platform_get_irq(dev, 0); ++ if(bp->irq_rdy < 0) { ++ ret = bp->irq_rdy; ++ goto fail; ++ } ++ ++ bp->irq_wdi2 = platform_get_irq(dev, 1); ++ if(bp->irq_wdi2 < 0) { ++ ret = bp->irq_wdi2; ++ goto fail; ++ } ++ ++ bp->irq_wdi = platform_get_irq(dev, 2); ++ if(bp->irq_wdi < 0) { ++ ret = bp->irq_wdi; ++ goto fail; ++ } ++ ++ set_irq_type(bp->irq_wdi, IRQT_FALLING); ++ request_irq(bp->irq_wdi, bp_wdi_handler, IRQF_DISABLED, ++ "bp wdi", bp); ++ ++ set_irq_type(bp->irq_rdy, IRQT_BOTHEDGE); ++ request_irq(bp->irq_rdy, bp_rdy_handler, IRQF_DISABLED, ++ "bp rdy", bp); ++ ++ set_irq_type(bp->irq_wdi2, IRQT_FALLING); ++ request_irq(bp->irq_wdi2, bp_wdi2_handler, IRQF_DISABLED, ++ "bp wdi2", bp); ++ ++ /* turn on BP */ ++ pxa_gpio_mode(GPIO_BB_RESET|GPIO_OUT); ++ pxa_gpio_set_value(GPIO_BB_RESET, 1); ++ ++ check_power_off(); ++ handshake(); ++ ++ return 0; ++fail: ++ kfree(bp); ++ return ret; ++} ++ ++static int ezxbp_remove(struct platform_device *dev) ++{ ++ struct bp *bp = platform_get_drvdata(dev); ++ ++ free_irq(bp->irq_wdi, bp); ++ free_irq(bp->irq_wdi2, bp); ++ free_irq(bp->irq_rdy, bp); ++ kfree(bp); ++ ++ return 0; ++} ++ ++static int ezxbp_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ DEBUGP("bp suspend!\n"); ++// pxa_gpio_set_value(GPIO_MCU_INT_SW, 0); ++ return 0; ++} ++ ++static int ezxbp_resume(struct platform_device *dev) ++{ ++ DEBUGP("bp resume!\n"); ++// pxa_gpio_set_value(GPIO_MCU_INT_SW, 1); ++ return 0; ++} ++static struct platform_driver ezxbp_driver = { ++ .probe = ezxbp_probe, ++ .remove = ezxbp_remove, ++#warning FIXME: missing suspend/resume support ++ .suspend = ezxbp_suspend, ++ .resume = ezxbp_resume, ++ .driver = { ++ .name = "ezx-bp", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++int __init ezxbp_init(void) ++{ ++ return platform_driver_register(&ezxbp_driver); ++} ++ ++void ezxbp_fini(void) ++{ ++ return platform_driver_unregister(&ezxbp_driver); ++} ++ ++module_init(ezxbp_init); ++module_exit(ezxbp_fini); ++ ++MODULE_DESCRIPTION("Motorola BP Control driver"); ++MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23/arch/arm/mach-pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Makefile 2007-10-23 12:03:55.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Makefile 2007-10-23 13:21:23.000000000 +0200 +@@ -25,6 +25,7 @@ + obj-$(CONFIG_PXA_EZX_E2) += ezx-e2.o + obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o + obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o ++obj-$(CONFIG_EZX_BP) += ezx-bp.o + + # Support for blinky lights + led-y := leds.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-core.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-core.patch new file mode 100644 index 0000000000..af31bc5620 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-core.patch @@ -0,0 +1,1016 @@ +Index: linux-2.6.23/arch/arm/boot/compressed/head-xscale.S +=================================================================== +--- linux-2.6.23.orig/arch/arm/boot/compressed/head-xscale.S 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/boot/compressed/head-xscale.S 2007-10-24 13:03:04.000000000 +0200 +@@ -48,3 +48,6 @@ + str r1, [r0, #0x18] + #endif + ++#ifdef CONFIG_ARCH_EZX ++ mov r7, #MACH_TYPE_EZX ++#endif +Index: linux-2.6.23/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Kconfig 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Kconfig 2007-10-24 18:56:36.000000000 +0200 +@@ -41,6 +41,10 @@ + bool "CompuLab EM-x270 platform" + select PXA27x + ++config PXA_EZX ++ bool "Motorola EZX Platform" ++ select PXA_SSP ++ + endchoice + + if PXA_SHARPSL +@@ -75,6 +79,35 @@ + + endif + ++if PXA_EZX ++ ++choice ++ prompt "Select target EZX device" ++ ++config PXA_EZX_E680 ++ bool "Motorola E680 GSM Phone" ++ select PXA27x ++ ++config PXA_EZX_A780 ++ bool "Motorola A780 GSM Phone" ++ select PXA27x ++ ++config PXA_EZX_E2 ++ bool "Motorola E2 GSM Phone" ++ select PXA27x ++ ++config PXA_EZX_A1200 ++ bool "Motorola A1200 GSM Phone" ++ select PXA27x ++ ++config PXA_EZX_E6 ++ bool "Motorola E6 GSM Phone" ++ select PXA27x ++ ++endchoice ++ ++endif ++ + endmenu + + config MACH_POODLE +@@ -148,4 +181,5 @@ + tristate + help + Enable support for PXA2xx SSP ports ++ + endif +Index: linux-2.6.23/arch/arm/mach-pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Makefile 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Makefile 2007-10-24 18:56:36.000000000 +0200 +@@ -19,6 +19,12 @@ + obj-$(CONFIG_MACH_POODLE) += poodle.o corgi_ssp.o + obj-$(CONFIG_MACH_TOSA) += tosa.o + obj-$(CONFIG_MACH_EM_X270) += em-x270.o ++obj-$(CONFIG_PXA_EZX) += ezx.o ++obj-$(CONFIG_PXA_EZX_A780) += ezx-a780.o ++obj-$(CONFIG_PXA_EZX_E680) += ezx-e680.o ++obj-$(CONFIG_PXA_EZX_E2) += ezx-e2.o ++obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o ++obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o + + # Support for blinky lights + led-y := leds.o +Index: linux-2.6.23/arch/arm/mach-pxa/ezx.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx.c 2007-10-24 18:56:36.000000000 +0200 +@@ -0,0 +1,118 @@ ++/* ++ * ezx.c - Common code for EZX platform. ++ * ++ * Copyright (c) 2005-2007 OpenEZX Team (www.openezx.org) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++#include <linux/delay.h> ++ ++#include <asm/arch/pxafb.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ohci.h> ++#include <asm/arch/ezx.h> ++ ++#include "generic.h" ++ ++/* EZX PXA Framebuffer */ ++void ezx_lcd_power(int on, struct fb_var_screeninfo *var) ++{ ++ if (on) { ++ mdelay(1); ++ GPSR3 = 0x00100000; ++ mdelay(10); ++ GPCR3 = 0x00100000; ++ GPDR3 |= 0x00100000; ++ } else { ++ GPSR3 = 0x00100000; ++ PGSR3 |= 0x00100000; ++ mdelay(41); ++ LCCR0 &= ~LCCR0_LDM; /* disable lcd disable done interrupt */ ++ LCCR0 |= LCCR0_DIS; /* normal disable lcd */ ++ mdelay(18); ++ } ++} ++EXPORT_SYMBOL(ezx_lcd_power); ++ ++/* failsafe if we are not using the backlight platform driver */ ++#ifndef CONFIG_BACKLIGHT_EZX ++void ezx_backlight_power(int on) ++{ ++ if (on) { ++ pxa_gpio_mode(GPIO16_PWM0_MD); ++ pxa_set_cken(CKEN_PWM0, 1); ++ PWM_CTRL0 = 0; ++ PWM_PWDUTY0 = 0x3ff; ++ PWM_PERVAL0 = 0x3ff; ++ } else { ++ PWM_CTRL0 = 0; ++ PWM_PWDUTY0 = 0x0; ++ PWM_PERVAL0 = 0x3FF; ++ pxa_set_cken(CKEN_PWM0, 0); ++ } ++} ++#else ++void ezx_backlight_power(int on){} ++#endif ++EXPORT_SYMBOL(ezx_backlight_power); ++ ++/* OHCI Controller */ ++static int ezx_ohci_init(struct device *dev) ++{ ++ /* for A780 support (connected with Neptune) */ ++ pxa_gpio_mode(GPIO30_USB_P3_2); /* GPIO30 - USB_P3_2/ICL_TXENB */ ++ pxa_gpio_mode(GPIO31_USB_P3_6); /* GPIO31 - USB_P3_6/ICL_VPOUT */ ++ pxa_gpio_mode(GPIO90_USB_P3_5); /* GPIO90 - USB_P3_5/ICL_VPIN */ ++ pxa_gpio_mode(GPIO91_USB_P3_1); /* GPIO91 - USB_P3_1/ICL_XRXD */ ++ pxa_gpio_mode(GPIO56_USB_P3_4); /* GPIO56 - USB_P3_4/ICL_VMOUT */ ++ pxa_gpio_mode(GPIO113_USB_P3_3);/* GPIO113 - USB_P3_3/ICL_VMIN */ ++ UP3OCR = 0x00000002; ++ ++ UHCHR = UHCHR & ~(UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); ++ ++ return 0; ++} ++ ++static struct pxaohci_platform_data ezx_ohci_platform_data = { ++ .port_mode = PMM_NPS_MODE, ++ .init = ezx_ohci_init, ++}; ++ ++ ++static struct platform_device *devices[] __initdata = { ++}; ++ ++static int __init ezx_init(void) ++{ ++ CKEN = (1 << CKEN_OSTIMER) | (1 << CKEN_MEMC); ++ ++ pxa_gpio_mode(GPIO_ICL_FFRXD_MD); ++ pxa_gpio_mode(GPIO_ICL_FFTXD_MD); ++ pxa_gpio_mode(GPIO_ICL_FFCTS_MD); ++ pxa_gpio_mode(GPIO_ICL_FFRTS_MD); ++ ++ pxa_gpio_mode(GPIO42_BTRXD_MD); ++ pxa_gpio_mode(GPIO43_BTTXD_MD); ++ pxa_gpio_mode(GPIO44_BTCTS_MD); ++ pxa_gpio_mode(GPIO45_BTRTS_MD); ++ ++ /* Standard UART */ ++ pxa_gpio_mode(GPIO46_STRXD_MD); ++ pxa_gpio_mode(GPIO47_STTXD_MD); ++ ++ pxa_set_ohci_info(&ezx_ohci_platform_data); ++ ++ platform_add_devices(devices, ARRAY_SIZE(devices)); ++ ++ return 0; ++} ++ ++subsys_initcall(ezx_init); +Index: linux-2.6.23/include/asm-arm/arch-pxa/ezx.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/ezx.h 2007-10-24 13:03:05.000000000 +0200 +@@ -0,0 +1,225 @@ ++/* ++ * linux/include/asm-arm/arch-pxa/ezx.h ++ * ++ * Specific macro defines for Motorola Ezx Development Platform ++ * ++ * Author: Zhuang Xiaofan ++ * Created: Nov 25, 2003 ++ * Copyright: Motorola Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/* support E680 p3 and ealier PCB */ ++//#define E680_P3_AND_EARLY ++ ++#define GPIO_is_high(x) (GPLR(x) & GPIO_bit(x)) ++#define set_GPIO(x) (GPSR(x) = GPIO_bit(x)) ++#define clr_GPIO(x) (GPCR(x) = GPIO_bit(x)) ++ ++/* ++ * Flags in memory for sleep use ++ */ ++#define FLAG_ADDR PHYS_OFFSET ++#define RESUME_ADDR (PHYS_OFFSET + 4) ++#define BPSIG_ADDR (PHYS_OFFSET + 8) ++ ++#define USER_OFF_FLAG 0x5a5a5a5a ++#define SLEEP_FLAG 0x6b6b6b6b ++#define OFF_FLAG 0x7c7c7c7c ++#define REFLASH_FLAG 0x0C1D2E3F ++#define PASS_THRU_FLAG 0x12345678 ++ ++#define WDI_FLAG 0xbb00dead ++#define NO_FLAG 0xaa00dead ++ ++/* ++ * GPIO control pin, have to change when hardware lock down ++ */ ++ ++#ifdef E680_P3_AND_EARLY ++ ++/* shakehand with BP's PIN */ ++#define GPIO_BP_RDY 0 /* BP_RDY */ ++#define GPIO_BB_WDI 13 /* BB_WDI */ ++#define GPIO_BB_WDI2 3 /* BB_WDI2 */ ++#define GPIO_BB_RESET 57 /* BB_RESET */ ++#define GPIO_MCU_INT_SW 115 /* MCU_INT_SW */ ++#define GPIO_TC_MM_EN 89 /* TC_MM_EN */ ++ ++/* control PCAP direct PIN */ ++#define GPIO_WDI_AP 4 /* WDI_AP */ ++#define GPIO_SYS_RESTART 55 /* restart PCAP power */ ++#define GPIO_AP_STANDBY 28 /* make pcap enter standby mode */ ++ ++/* communicate with PCAP's PIN */ ++#define GPIO_PCAP_SEC_INT 1 /* PCAP interrupt PIN to AP */ ++#define GPIO_SPI_CLK 23 /* PCAP SPI port clock */ ++#define GPIO_SPI_CE 24 /* PCAP SPI port SSPFRM */ ++#define GPIO_SPI_MOSI 25 /* PCAP SPI port SSPTXD */ ++#define GPIO_SPI_MISO 26 /* PCAP SPI port SSPRXD */ ++ ++/* blue tooth control PIN */ ++#define GPIO_BT_WAKEUP 2 /* AP wake up bluetooth module */ ++#define GPIO_BT_HOSTWAKE 14 /* bluetooth module wake up Ap module */ ++#define GPIO_BT_RESET 56 /* AP reset bluetooth module */ ++ ++/* control LCD high - OFF low -- ON */ ++#define GPIO_LCD_OFF 116 /* control LCD */ ++ ++/* FFUART PIN */ ++#define GPIO_ICL_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) ++#define GPIO_ICL_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) ++#define GPIO_ICL_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) ++#define GPIO_ICL_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) ++ ++#elif defined(A780_P1_AND_EARLY) ++ ++/* shakehand with BP's PIN */ ++#define GPIO_BP_RDY 0 /* BP_RDY */ ++#define GPIO_BB_WDI 13 /* BB_WDI */ ++#define GPIO_BB_WDI2 3 /* BB_WDI2 */ ++#define GPIO_BB_RESET 82 /* BB_RESET */ ++#define GPIO_MCU_INT_SW 57 /* MCU_INT_SW */ ++#define GPIO_TC_MM_EN 89 /* TC_MM_EN */ ++ ++/* control PCAP direct PIN */ ++#define GPIO_WDI_AP 4 /* WDI_AP */ ++#define GPIO_SYS_RESTART 55 /* restart PCAP power */ ++#define GPIO_AP_STANDBY 28 /* make pcap enter standby mode */ ++ ++/* communicate with PCAP's PIN */ ++#define GPIO_PCAP_SEC_INT 1 /* PCAP interrupt PIN to AP */ ++#define GPIO_SPI_CLK 29 /* PCAP SPI port clock */ ++#define GPIO_SPI_CE 24 /* PCAP SPI port SSPFRM */ ++#define GPIO_SPI_MOSI 25 /* PCAP SPI port SSPTXD */ ++#define GPIO_SPI_MISO 26 /* PCAP SPI port SSPRXD */ ++ ++/* blue tooth control PIN */ ++#define GPIO_BT_WAKEUP 2 /* AP wake up bluetooth module */ ++#define GPIO_BT_HOSTWAKE 14 /* bluetooth module wake up Ap module */ ++#define GPIO_BT_RESET 56 /* AP reset bluetooth module */ ++ ++/* control LCD high - OFF low -- ON */ ++#define GPIO_LCD_OFF 116 /* control LCD */ ++ ++/* FFUART PIN */ ++#define GPIO_ICL_FFRXD_MD (53 | GPIO_ALT_FN_1_IN) ++#define GPIO_ICL_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) ++#define GPIO_ICL_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) ++#define GPIO_ICL_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) ++ ++#else ++ ++/* shakehand with BP's PIN */ ++#define GPIO_BP_RDY 0 /* BP_RDY */ ++#define GPIO_BB_WDI 13 /* BB_WDI */ ++#define GPIO_BB_WDI2 3 /* BB_WDI2 */ ++#define GPIO_BB_RESET 82 /* BB_RESET */ ++#define GPIO_MCU_INT_SW 57 /* MCU_INT_SW */ ++#define GPIO_TC_MM_EN 99 /* TC_MM_EN */ ++ ++/* control PCAP direct PIN */ ++#define GPIO_WDI_AP 4 /* WDI_AP */ ++#define GPIO_SYS_RESTART 55 /* restart PCAP power */ ++//#define GPIO_AP_STANDBY 28 /* make pcap enter standby mode */ ++ ++/* communicate with PCAP's PIN */ ++#define GPIO_PCAP_SEC_INT 1 /* PCAP interrupt PIN to AP */ ++#define GPIO_SPI_CLK 29 /* PCAP SPI port clock */ ++#define GPIO_SPI_CE 24 /* PCAP SPI port SSPFRM */ ++#define GPIO_SPI_MOSI 25 /* PCAP SPI port SSPTXD */ ++#define GPIO_SPI_MISO 26 /* PCAP SPI port SSPRXD */ ++ ++/* blue tooth control PIN */ ++#define GPIO_BT_WAKEUP 28 /* AP wake up bluetooth module */ ++#define GPIO_BT_HOSTWAKE 14 /* AP wake up bluetooth module */ ++#define GPIO_BT_RESET 48 /* AP reset bluetooth module */ ++ ++/* control LCD high - OFF low -- ON */ ++#define GPIO_LCD_OFF 116 /* control LCD */ ++ ++/* FFUART PIN */ ++#define GPIO_ICL_FFRXD_MD (53 | GPIO_ALT_FN_1_IN) ++#define GPIO_ICL_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) ++#define GPIO_ICL_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) ++#define GPIO_ICL_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) ++ ++#endif ++/* ++ * ezx platform, wake up source edge detect bit ++ */ ++#define PEDR_INT_SEC 1 ++ ++#define GPIO_FLIP_PIN 12 ++/*E680 screen lock button*/ ++ ++#define GPIO_LOCK_SCREEN_PIN GPIO_FLIP_PIN ++ ++/* MMC interface */ ++#define GPIO_MMC_DETECT 11 ++#define GPIO_MMC_CLK 32 ++#define GPIO_MMC_DATA0 92 ++#define GPIO_MMC_WP 107 ++#define GPIO_MMC_DATA1 109 ++#define GPIO_MMC_DATA2 110 ++#define GPIO_MMC_DATA3 111 ++#define GPIO_MMC_CMD 112 ++ ++/* interface function */ ++#define GPIO_MMC_CLK_MD (GPIO_MMC_CLK | GPIO_ALT_FN_2_OUT) ++#define GPIO_MMC_DATA0_MD (GPIO_MMC_DATA0 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT) ++#define GPIO_MMC_DATA1_MD (GPIO_MMC_DATA1 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT) ++#define GPIO_MMC_DATA2_MD (GPIO_MMC_DATA2 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT) ++#define GPIO_MMC_DATA3_MD (GPIO_MMC_DATA3 | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT) ++ ++#define GPIO_MMC_CMD_MD (GPIO_MMC_CMD | GPIO_ALT_FN_1_IN | GPIO_ALT_FN_1_OUT) ++ ++/* EMU GPIO 119 ---MUX2 120 --- MUX1 */ ++#define GPIO_EMU_MUX1 120 ++#define GPIO_EMU_MUX2 119 ++#define GPIO_SNP_INT_CTL 86 ++#define GPIO_SNP_INT_IN 87 ++ ++ ++/* audio related pins */ ++#define AP_13MHZ_OUTPUT_PIN 9 ++ ++#ifdef CONFIG_ARCH_EZX_E680 ++#define GPIO_VA_SEL_BUL 79 ++#define GPIO_FLT_SEL_BUL 80 /* out filter select pin */ ++#define GPIO_MIDI_RESET 78 /* GPIO used by MIDI chipset */ ++#define GPIO_MIDI_CS 33 ++#define GPIO_MIDI_IRQ 15 ++#define GPIO_MIDI_NPWE 49 ++#define GPIO_MIDI_RDY 18 ++#endif ++ ++#ifdef CONFIG_ARCH_EZX_A780 ++#define GPIO_HW_ATTENUATE_A780 96 /* hw noise attenuation be used or bypassed, for receiver or louderspeaker mode */ ++#endif ++ ++ ++/* bp status pin */ ++#define GPIO_BP_STATE 41 ++ ++/* define usb related pin */ ++#define GPIO34_TXENB 34 ++#define GPIO35_XRXD 35 ++#define GPIO36_VMOUT 36 ++#define GPIO39_VPOUT 39 ++#define GPIO40_VPIN 40 ++#define GPIO53_VMIN 53 ++ ++/* USB client 6 pin defination */ ++#define GPIO34_TXENB_MD (GPIO34_TXENB | GPIO_ALT_FN_1_OUT) ++#define GPIO35_XRXD_MD (GPIO35_XRXD | GPIO_ALT_FN_2_IN ) ++#define GPIO36_VMOUT_MD (GPIO36_VMOUT | GPIO_ALT_FN_1_OUT) ++#define GPIO39_VPOUT_MD (GPIO39_VPOUT | GPIO_ALT_FN_1_OUT) ++#define GPIO40_VPIN_MD (GPIO40_VPIN | GPIO_ALT_FN_3_IN ) ++#define GPIO53_VMIN_MD (GPIO53_VMIN | GPIO_ALT_FN_2_IN ) ++ ++#define GPIO53_FFRXD_MD (53 | GPIO_ALT_FN_1_IN) ++ +Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-10-24 13:03:04.000000000 +0200 ++++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h 2007-10-24 18:56:34.000000000 +0200 +@@ -856,6 +856,8 @@ + #define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ + #define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ + ++#define UP3OCR __REG(0x40600024) /* USB Port 3 Output Control register */ ++ + #define UDCCSN(x) __REG2(0x40600100, (x) << 2) + #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ + #define UDCCSR0_SA (1 << 7) /* Setup Active */ +@@ -1259,6 +1261,7 @@ + #define GPIO33_nCS_5 33 /* chip select 5 */ + #define GPIO34_FFRXD 34 /* FFUART receive */ + #define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ ++#define GPIO34_USB_P2_2 34 /* USB Port2 Pin 2 */ + #define GPIO35_FFCTS 35 /* FFUART Clear to send */ + #define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ + #define GPIO37_FFDSR 37 /* FFUART data set ready */ +@@ -1372,6 +1375,7 @@ + #define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) + #define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) + #define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) ++#define GPIO22_SCLK2_MD (22 | GPIO_ALT_FN_3_IN) + #define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) + #define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) + #define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +@@ -1382,23 +1386,33 @@ + #define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) + #define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) + #define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) ++#define GPIO29_SCLK_MD (29 | GPIO_ALT_FN_3_IN) + #define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) + #define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) ++#define GPIO30_USB_P3_2 (30 | GPIO_ALT_FN_3_OUT) + #define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) + #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) ++#define GPIO31_USB_P3_6 (31 | GPIO_ALT_FN_3_OUT) + #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) + #define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) + #define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) + #define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) + #define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) + #define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) ++#define GPIO34_USB_P2_2_MD (34 | GPIO_ALT_FN_1_OUT) + #define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) ++#define GPIO35_USB_P2_1_MD (35 | GPIO_ALT_FN_2_IN) + #define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) ++#define GPIO36_USB_P2_4_MD (36 | GPIO_ALT_FN_1_OUT) + #define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) ++#define GPIO37_SFRM2_MD (37 | GPIO_ALT_FN_2_IN) + #define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) ++#define GPIO38_STXD2_MD (38 | GPIO_ALT_FN_2_OUT) + #define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) + #define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) ++#define GPIO39_USB_P2_6_MD (39 | GPIO_ALT_FN_1_OUT) + #define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) ++#define GPIO40_USB_P2_5_MD (40 | GPIO_ALT_FN_3_IN) + #define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) + #define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) + #define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) +@@ -1423,13 +1437,17 @@ + #define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) + #define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) + #define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) ++#define GPIO52_SCLK3_MD (52 | GPIO_ALT_FN_2_OUT) + #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) + #define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) ++#define GPIO53_FFRXD_MD (53 | GPIO_ALT_FN_1_IN) ++#define GPIO53_USB_P2_3_MD (53 | GPIO_ALT_FN_2_IN) + #define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) + #define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) + #define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) + #define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) + #define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) ++#define GPIO56_USB_P3_4 (56 | GPIO_ALT_FN_1_OUT) + #define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) + #define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) + #define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +@@ -1465,13 +1483,19 @@ + #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) + #define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) + #define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) ++#define GPIO81_STXD3_MD (81 | GPIO_ALT_FN_1_OUT) + #define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) + #define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) + #define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) + #define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) ++#define GPIO83_SFRM3_MD (83 | GPIO_ALT_FN_1_IN) + #define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) + #define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) + #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) ++#define GPIO88_SRXD2_MD (88 | GPIO_ALT_FN_2_IN) ++#define GPIO89_SRXD3_MD (89 | GPIO_ALT_FN_1_IN) ++#define GPIO90_USB_P3_5 (90 | GPIO_ALT_FN_2_IN) ++#define GPIO91_USB_P3_1 (91 | GPIO_ALT_FN_2_IN) + #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) + #define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) + #define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) +@@ -1483,6 +1507,7 @@ + #define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) + #define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) + #define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) ++#define GPIO113_USB_P3_3 (113 | GPIO_ALT_FN_3_IN) + #define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) + #define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) + +@@ -1498,6 +1523,7 @@ + #define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ + #define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ + #define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ ++#define PGSR(x) (__REG(0x40F00020 + ((unsigned long)(x)/32*4))) + #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ + #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ + #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ +Index: linux-2.6.23/arch/arm/boot/compressed/head.S +=================================================================== +--- linux-2.6.23.orig/arch/arm/boot/compressed/head.S 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/boot/compressed/head.S 2007-10-24 13:03:05.000000000 +0200 +@@ -117,6 +117,9 @@ + mov r0, r0 + .endr + ++ mov r1, #0x300 @ mach_id 0x363 is official EZX ++ orr r1, r1, #0x63 @ bootloader JUMP doesn't set r1 ++ + b 1f + .word 0x016f2818 @ Magic numbers to help the loader + .word start @ absolute load/run zImage address +Index: linux-2.6.23/include/asm-arm/arch-pxa/uncompress.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/uncompress.h 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/include/asm-arm/arch-pxa/uncompress.h 2007-10-24 13:03:05.000000000 +0200 +@@ -14,14 +14,14 @@ + #define STUART ((volatile unsigned long *)0x40700000) + #define HWUART ((volatile unsigned long *)0x41600000) + +-#define UART FFUART ++#define UART STUART + + + static inline void putc(char c) + { +- while (!(UART[5] & 0x20)) ++/* while (!(UART[5] & 0x40)) + barrier(); +- UART[0] = c; ++ UART[0] = c;*/ + } + + /* +Index: linux-2.6.23/arch/arm/mm/init.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mm/init.c 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/mm/init.c 2007-10-24 13:03:05.000000000 +0200 +@@ -240,6 +240,10 @@ + */ + reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, + boot_pages << PAGE_SHIFT); ++#ifdef CONFIG_PXA_EZX ++ /* reserve the first page memory for exiting sleep and user off */ ++ reserve_bootmem_node(pgdat, PHYS_OFFSET, PAGE_SIZE); ++#endif + + #ifdef CONFIG_BLK_DEV_INITRD + /* +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a780.c 2007-10-24 18:56:36.000000000 +0200 +@@ -0,0 +1,88 @@ ++/* ++ * ezx-a780.c - Code specific to A780 GSM Phone. ++ * ++ * Copyright (c) 2007 OpenEZX Team (www.openezx.org) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> ++ ++#include "generic.h" ++ ++extern void ezx_lcd_power(int, struct fb_var_screeninfo *); ++extern void ezx_backlight_power(int); ++ ++static struct pxafb_mode_info mode_a780 = { ++ .pixclock = 150000, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 16, ++ .hsync_len = 10, ++ .left_margin = 20, ++ .right_margin = 10, ++ .vsync_len = 2, ++ .upper_margin = 3, ++ .lower_margin = 2, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++}; ++ ++static struct pxafb_mach_info a780_fb_info = { ++ .modes = &mode_a780, ++ .num_modes = 1, ++ .lccr0 = 0x002008F8, ++ .lccr3 = 0x0430FF09, ++ .pxafb_backlight_power = &ezx_backlight_power, ++ .pxafb_lcd_power = &ezx_lcd_power, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++}; ++ ++static void __init a780_init(void) ++{ ++ /* setup sleep mode values */ ++ PWER = 0xc0007803; // disable usb, GPIO15 NC ++ PFER = 0x00007803; ++ PRER = 0x00001802; ++ PGSR0 = 0x00000010; ++ PGSR1 = 0x02800000; ++ PGSR2 = 0x00040000; ++ PGSR3 = 0x00000008; ++ PCFR = PCFR_DC_EN | PCFR_FS | PCFR_FP | PCFR_OPDE; ++ PSLR = 0x05800f00; ++ ++ set_pxa_fb_info(&a780_fb_info); ++ ++ /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ ++ pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); ++ clr_GPIO(GPIO_EMU_MUX1); ++ pxa_gpio_mode(GPIO_EMU_MUX2|GPIO_OUT); ++ clr_GPIO(GPIO_EMU_MUX2); ++ ++ platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++MACHINE_START(EZX, "Motorola Ezx Platform") ++ /* Maintainer: OpenEZX Team (www.openezx.org) */ ++ .phys_io = 0x40000000, ++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, ++ .boot_params = 0xa0000100, ++ .map_io = pxa_map_io, ++ .init_irq = pxa27x_init_irq, ++ .timer = &pxa_timer, ++ .init_machine = a780_init, ++MACHINE_END +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e2.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e2.c 2007-10-24 18:57:44.000000000 +0200 +@@ -0,0 +1,70 @@ ++/* ++ * ezx-e2.c - Code specific to E2 GSM Phone. ++ * ++ * Copyright (c) 2007 OpenEZX Team (www.openezx.org) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> ++ ++#include "generic.h" ++ ++extern void ezx_lcd_power(int, struct fb_var_screeninfo *); ++extern void ezx_backlight_power(int); ++ ++static struct pxafb_mode_info mode_e2 = { ++ .pixclock = 192308, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 8, ++ .hsync_len = 10, ++ .left_margin = 20, ++ .right_margin = 10, ++ .vsync_len = 2, ++ .upper_margin = 3, ++ .lower_margin = 2, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++}; ++ ++static struct pxafb_mach_info e2_fb_info = { ++ .modes = &mode_e2, ++ .num_modes = 1, ++ .lccr0 = 0x022008B8, ++ .lccr3 = 0xC130FF13, ++ .pxafb_backlight_power = &ezx_backlight_power, ++ .pxafb_lcd_power = &ezx_lcd_power, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++}; ++ ++static void __init e2_init(void) ++{ ++ set_pxa_fb_info(&e2_fb_info); ++ ++ platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++MACHINE_START(EZX, "Motorola Ezx Platform") ++ /* Maintainer: OpenEZX Team (www.openezx.org) */ ++ .phys_io = 0x40000000, ++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, ++ .boot_params = 0xa0000200, ++ .map_io = pxa_map_io, ++ .init_irq = pxa27x_init_irq, ++ .timer = &pxa_timer, ++ .init_machine = e2_init, ++MACHINE_END +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e680.c 2007-10-24 18:57:19.000000000 +0200 +@@ -0,0 +1,87 @@ ++/* ++ * ezx-e680.c - Code specific to E680 GSM Phone. ++ * ++ * Copyright (c) 2007 OpenEZX Team (www.openezx.org) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> ++ ++#include "generic.h" ++ ++extern void ezx_lcd_power(int, struct fb_var_screeninfo *); ++extern void ezx_backlight_power(int); ++ ++static struct pxafb_mode_info mode_e680 = { ++ .pixclock = 150000, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 16, ++ .hsync_len = 10, ++ .left_margin = 20, ++ .right_margin = 10, ++ .vsync_len = 2, ++ .upper_margin = 3, ++ .lower_margin = 2, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++}; ++ ++static struct pxafb_mach_info e680_fb_info = { ++ .modes = &mode_e680, ++ .num_modes = 1, ++ .lccr0 = 0x002008F8, ++ .lccr3 = 0x0430FF09, ++ .pxafb_backlight_power = &ezx_backlight_power, ++ .pxafb_lcd_power = &ezx_lcd_power, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++}; ++ ++static void __init e680_init(void) ++{ ++ /* setup sleep mode values */ ++ PWER = 0xc000f803; // disable usb 0xdc00f803; ++ PFER = 0x0000f803; ++ PRER = 0x00001802; ++ PGSR0 = 0x00000010; ++ PGSR1 = 0x02800000; ++ PGSR2 = 0x00040000; ++ PGSR3 = 0x00000000; ++ PCFR = PCFR_DC_EN | PCFR_FS | PCFR_FP | PCFR_OPDE; ++ PSLR = 0x05800f00; ++ ++ set_pxa_fb_info(&e680_fb_info); ++ ++ /* clear EMU MUX1/MUX2 (low) to close the audio path to EMU */ ++ pxa_gpio_mode(GPIO_EMU_MUX1|GPIO_OUT); ++ clr_GPIO(GPIO_EMU_MUX1); ++ pxa_gpio_mode(GPIO_EMU_MUX2|GPIO_OUT); ++ clr_GPIO(GPIO_EMU_MUX2); ++ ++ platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++MACHINE_START(EZX, "Motorola Ezx Platform") ++ /* Maintainer: OpenEZX Team (www.openezx.org) */ ++ .phys_io = 0x40000000, ++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, ++ .boot_params = 0xa0000100, ++ .map_io = pxa_map_io, ++ .init_irq = pxa27x_init_irq, ++ .timer = &pxa_timer, ++ .init_machine = e680_init, ++MACHINE_END +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-a1200.c 2007-10-24 18:58:15.000000000 +0200 +@@ -0,0 +1,70 @@ ++/* ++ * ezx-a1200.c - Code specific to A1200 GSM Phone. ++ * ++ * Copyright (c) 2007 OpenEZX Team (www.openezx.org) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> ++ ++#include "generic.h" ++ ++extern void ezx_lcd_power(int, struct fb_var_screeninfo *); ++extern void ezx_backlight_power(int); ++ ++static struct pxafb_mode_info mode_a1200 = { ++ .pixclock = 192308, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 8, ++ .hsync_len = 10, ++ .left_margin = 20, ++ .right_margin = 10, ++ .vsync_len = 2, ++ .upper_margin = 3, ++ .lower_margin = 2, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++}; ++ ++static struct pxafb_mach_info a1200_fb_info = { ++ .modes = &mode_a1200, ++ .num_modes = 1, ++ .lccr0 = 0x022008B8, ++ .lccr3 = 0xC130FF13, ++ .pxafb_backlight_power = &ezx_backlight_power, ++ .pxafb_lcd_power = &ezx_lcd_power, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++}; ++ ++static void __init a1200_init(void) ++{ ++ set_pxa_fb_info(&a1200_fb_info); ++ ++ platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++MACHINE_START(EZX, "Motorola Ezx Platform") ++ /* Maintainer: OpenEZX Team (www.openezx.org) */ ++ .phys_io = 0x40000000, ++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, ++ .boot_params = 0xa0000200, ++ .map_io = pxa_map_io, ++ .init_irq = pxa27x_init_irq, ++ .timer = &pxa_timer, ++ .init_machine = a1200_init, ++MACHINE_END +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-e6.c 2007-10-24 18:57:58.000000000 +0200 +@@ -0,0 +1,70 @@ ++/* ++ * ezx-e6.c - Code specific to E6 GSM Phone. ++ * ++ * Copyright (c) 2007 OpenEZX Team (www.openezx.org) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/fb.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/ezx.h> ++ ++#include "generic.h" ++ ++extern void ezx_lcd_power(int, struct fb_var_screeninfo *); ++extern void ezx_backlight_power(int); ++ ++static struct pxafb_mode_info mode_e6 = { ++ .pixclock = 192308, ++ .xres = 240, ++ .yres = 320, ++ .bpp = 8, ++ .hsync_len = 10, ++ .left_margin = 20, ++ .right_margin = 10, ++ .vsync_len = 2, ++ .upper_margin = 3, ++ .lower_margin = 2, ++ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, ++}; ++ ++static struct pxafb_mach_info e6_fb_info = { ++ .modes = &mode_e6, ++ .num_modes = 1, ++ .lccr0 = 0x022008B8, ++ .lccr3 = 0xC130FF13, ++ .pxafb_backlight_power = &ezx_backlight_power, ++ .pxafb_lcd_power = &ezx_lcd_power, ++}; ++ ++static struct platform_device *devices[] __initdata = { ++}; ++ ++static void __init e6_init(void) ++{ ++ set_pxa_fb_info(&e6_fb_info); ++ ++ platform_add_devices(devices, ARRAY_SIZE(devices)); ++} ++ ++MACHINE_START(EZX, "Motorola Ezx Platform") ++ /* Maintainer: OpenEZX Team (www.openezx.org) */ ++ .phys_io = 0x40000000, ++ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, ++ .boot_params = 0xa0000200, ++ .map_io = pxa_map_io, ++ .init_irq = pxa27x_init_irq, ++ .timer = &pxa_timer, ++ .init_machine = e6_init, ++MACHINE_END diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-emu.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-emu.patch new file mode 100644 index 0000000000..67075ec1fc --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-emu.patch @@ -0,0 +1,269 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-emu.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-emu.c 2007-10-23 15:57:50.000000000 +0200 +@@ -0,0 +1,219 @@ ++/* ++ * EMU Driver for Motorola EZX phones ++ * ++ * Copyright (c) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx.h> ++#include <asm/arch/ezx-pcap.h> ++#include <asm/arch/udc.h> ++ ++static struct pxa2xx_udc_mach_info ezx_udc_info; ++extern int ezx_pcap_bit_set(u_int32_t, u_int8_t); ++extern int ezx_pcap_read_bit(u_int32_t); ++static int emu_irq_usb4v; ++static int emu_irq_usb1v; ++ ++ ++#if defined CONFIG_EZX_EMU_USB ++#define emu_switch_to_default() emu_switch_to_usb() ++#elif defined CONFIG_EZX_EMU_UART ++#define emu_switch_to_default() emu_switch_to_uart() ++#else ++#define emu_switch_to_default() emu_switch_to_nothing() ++#endif ++ ++void emu_switch_to_usb(void) ++{ ++ printk(KERN_NOTICE "EMU: Switching to USB\n"); ++ pxa_gpio_mode(GPIO34_USB_P2_2_MD); ++ pxa_gpio_mode(GPIO35_USB_P2_1_MD); ++ pxa_gpio_mode(GPIO36_USB_P2_4_MD); ++ pxa_gpio_mode(GPIO39_USB_P2_6_MD); ++ pxa_gpio_mode(GPIO40_USB_P2_5_MD); ++ pxa_gpio_mode(GPIO53_USB_P2_3_MD); ++ UP2OCR = 0x02000000; ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_FSENB, 0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 1); ++ clr_GPIO(GPIO_EMU_MUX1); ++ clr_GPIO(GPIO_EMU_MUX2); ++} ++ ++void emu_switch_to_uart(void) ++{ ++ printk(KERN_NOTICE "EMU: Switching to UART\n"); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN,0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232_DIR, 1); ++ set_GPIO(GPIO39_FFTXD); ++ pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); ++ set_GPIO(GPIO34_TXENB); ++ pxa_gpio_mode(GPIO35_XRXD | GPIO_IN); ++ pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO40_VPIN | GPIO_IN); ++ pxa_gpio_mode(GPIO39_FFTXD_MD); ++ pxa_gpio_mode(GPIO53_FFRXD_MD); ++ pxa_set_cken(CKEN_FFUART, 1); ++ clr_GPIO(GPIO_EMU_MUX1); ++ clr_GPIO(GPIO_EMU_MUX2); ++ ++} ++ ++void emu_switch_to_audio(int stereo) ++{ ++ printk(KERN_NOTICE "EMU: Switching to audio(%s)\n", (stereo ? "stereo" : "mono")); ++ clr_GPIO(GPIO39_VPOUT); ++ if (stereo) { ++ pxa_gpio_mode(GPIO34_TXENB | GPIO_IN); ++ clr_GPIO(GPIO39_VPOUT); ++ } else { ++ pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); ++ set_GPIO(GPIO34_TXENB); ++ } ++ ++ pxa_gpio_mode(GPIO35_XRXD | GPIO_IN); ++ pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO40_VPIN | GPIO_IN); ++ pxa_gpio_mode(GPIO53_VMIN | GPIO_IN); ++ set_GPIO(GPIO_EMU_MUX1); ++ if (stereo) ++ set_GPIO(GPIO_EMU_MUX2); ++ else ++ clr_GPIO(GPIO_EMU_MUX2); ++} ++ ++void emu_switch_to_nothing(void) ++{ ++ printk(KERN_NOTICE "EMU: Switching to disconnected\n"); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_VUSB_EN, 0); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_RS232ENB, 1); ++ pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); ++ set_GPIO(GPIO34_TXENB); ++ pxa_gpio_mode(GPIO35_XRXD | GPIO_IN); ++ pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO40_VPIN | GPIO_IN); ++ pxa_gpio_mode(GPIO53_VMIN | GPIO_IN); ++} ++ ++ ++static irqreturn_t emu_irq(int irq, void *data) ++{ ++ switch (irq) { ++ case EZX_IRQ_USB4V: ++ if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V))) ++ emu_switch_to_default(); ++ break; ++ case EZX_IRQ_USB1V: ++ if(!ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB1V))) ++ emu_switch_to_nothing(); ++ break; ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init ezx_emu_probe(struct platform_device *dev) ++{ ++ pxa_gpio_mode(GPIO_SNP_INT_IN | GPIO_IN); ++ pxa_gpio_mode(GPIO_EMU_MUX1 | GPIO_OUT); ++ pxa_gpio_mode(GPIO_EMU_MUX2 | GPIO_OUT); ++ ++ emu_irq_usb4v = platform_get_irq(dev, 0); ++ if(emu_irq_usb4v < 0) { ++ printk(KERN_ERR "Unable to get IRQ for USB4V!\n"); ++ return emu_irq_usb4v; ++ } ++ emu_irq_usb1v = platform_get_irq(dev, 1); ++ if(emu_irq_usb1v < 0) { ++ printk(KERN_ERR "Unable to get IRQ for USB1V!\n"); ++ return emu_irq_usb1v; ++ } ++ ++ request_irq(emu_irq_usb4v, &emu_irq, IRQF_DISABLED, "usb 4v", NULL); ++ request_irq(emu_irq_usb1v, &emu_irq, IRQF_DISABLED, "usb 1v", NULL); ++ ++ pxa_set_udc_info(&ezx_udc_info); ++ ++ if(ezx_pcap_read_bit(pbit(PCAP_REG_PSTAT, PCAP_IRQ_USB4V))) ++ emu_switch_to_default(); ++ else ++ emu_switch_to_nothing(); ++ ++ return 0; ++} ++ ++static int ezx_emu_remove(struct platform_device *dev) ++{ ++ free_irq(emu_irq_usb4v, NULL); ++ free_irq(emu_irq_usb1v, NULL); ++ ++ return 0; ++} ++ ++/* USB Device Controller */ ++static int udc_connected_status; ++static void ezx_udc_command(int cmd) ++{ ++ switch (cmd) { ++ case PXA2XX_UDC_CMD_DISCONNECT: ++ printk(KERN_NOTICE "USB cmd disconnect\n"); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0); ++ udc_connected_status = 0; ++ break; ++ case PXA2XX_UDC_CMD_CONNECT: ++ printk(KERN_NOTICE "USB cmd connect\n"); ++ ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1); ++ udc_connected_status = 1; ++ break; ++ } ++} ++ ++static int ezx_udc_is_connected(void) ++{ ++ return udc_connected_status; ++} ++ ++static struct pxa2xx_udc_mach_info ezx_udc_info __initdata = { ++ .udc_is_connected = ezx_udc_is_connected, ++ .udc_command = ezx_udc_command, ++}; ++ ++static struct platform_driver ezxemu_driver = { ++ .probe = ezx_emu_probe, ++ .remove = ezx_emu_remove, ++ .driver = { ++ .name = "ezx-emu", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++int __init ezx_emu_init(void) ++{ ++ return platform_driver_register(&ezxemu_driver); ++} ++ ++void ezx_emu_fini(void) ++{ ++ return platform_driver_unregister(&ezxemu_driver); ++} ++ ++module_init(ezx_emu_init); ++module_exit(ezx_emu_fini); ++ ++MODULE_DESCRIPTION("Motorola Enchanced Mini Usb driver"); ++MODULE_AUTHOR("Daniel Ribeiro <drwyrm@gmail.com>"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Kconfig 2007-10-23 15:38:53.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Kconfig 2007-10-23 18:00:57.000000000 +0200 +@@ -112,6 +112,28 @@ + config EZX_PCAP + bool "PCAP Support" + ++config EZX_EMU ++ bool "Motorola Enchanced Mini Usb" ++ depends on EZX_PCAP ++ ++if EZX_EMU ++ ++choice ++ prompt "Select default EMU mode" ++ ++config EZX_EMU_USB ++ bool "USB" ++ ++config EZX_EMU_UART ++ bool "UART" ++ ++config EZX_EMU_NOTHING ++ bool "nothing" ++ ++endchoice ++ ++endif ++ + endif + + endmenu +Index: linux-2.6.23/arch/arm/mach-pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Makefile 2007-10-23 15:38:53.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Makefile 2007-10-23 18:00:57.000000000 +0200 +@@ -27,6 +27,7 @@ + obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o + obj-$(CONFIG_EZX_BP) += ezx-bp.o + obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o ++obj-$(CONFIG_EZX_EMU) += ezx-emu.o + + # Support for blinky lights + led-y := leds.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-enable-stuart.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-enable-stuart.patch new file mode 100644 index 0000000000..6f1a2c1ba4 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-enable-stuart.patch @@ -0,0 +1,99 @@ +Index: linux-2.6.21/arch/arm/boot/compressed/head.S +=================================================================== +--- linux-2.6.21.orig/arch/arm/boot/compressed/head.S 2007-05-19 11:22:56.000000000 -0300 ++++ linux-2.6.21/arch/arm/boot/compressed/head.S 2007-05-19 11:50:29.000000000 -0300 +@@ -10,6 +10,7 @@ + */ + #include <linux/linkage.h> + ++#define DEBUG + /* + * Debugging stuff + * +@@ -117,6 +118,8 @@ + mov r0, r0 + .endr + ++ inituart r10, r11 ++ + mov r1, #0x300 @ mach_id 0x363 is official EZX + orr r1, r1, #0x63 @ bootloader JUMP doesn't set r1 + +Index: linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h +=================================================================== +--- linux-2.6.21.orig/include/asm-arm/arch-pxa/uncompress.h 2007-05-19 11:22:56.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/uncompress.h 2007-05-19 11:30:38.000000000 -0300 +@@ -19,9 +19,9 @@ + + static inline void putc(char c) + { +-/* while (!(UART[5] & 0x40)) ++ while (!(UART[5] & 0x40)) + barrier(); +- UART[0] = c;*/ ++ UART[0] = c; + } + + /* +Index: linux-2.6.21/include/asm-arm/arch-pxa/debug-macro.S +=================================================================== +--- linux-2.6.21.orig/include/asm-arm/arch-pxa/debug-macro.S 2007-05-19 11:30:54.000000000 -0300 ++++ linux-2.6.21/include/asm-arm/arch-pxa/debug-macro.S 2007-05-19 11:49:35.000000000 -0300 +@@ -14,11 +14,52 @@ + #include "hardware.h" + + .macro addruart,rx +- mrc p15, 0, \rx, c1, c0 +- tst \rx, #1 @ MMU enabled? +- moveq \rx, #0x40000000 @ physical +- movne \rx, #io_p2v(0x40000000) @ virtual +- orr \rx, \rx, #0x00100000 ++@ mrc p15, 0, \rx, c1, c0 ++@ tst \rx, #1 @ MMU enabled? ++ mov \rx, #0x40000000 ++@ moveq \rx, #0x40000000 @ physical ++@ movne \rx, #io_p2v(0x40000000) @ virtual ++ orr \rx, \rx, #0x00700000 ++ .endm ++ ++ .macro inituart,rd,rx ++ ldr \rd, =0x41300004 @ CKEN ++ ldr \rx, [\rd] ++ orr \rx, \rx, #0x20 ++ str \rx, [\rd] ++ ++ ldr \rd, =0x40E0005C ++ ldr \rx, [\rd] ++ bic \rx, \rx, #0xF0000000 @ clear GPIO46/47 config ++ orr \rx, \rx, #0x60000000 @ set GPIO46: AF2, GPIO47: AF1 ++ str \rx, [\rd] ++ ldr \rd, =0x40E00010 ++ ldr \rx, [\rd] ++ bic \rx, \rx, #0x0000c000 @ clear GPIO46/47 direction ++ orr \rx, \rx, #0x00008000 @ set GPIO 47 out, 46 in ++ str \rx, [\rd] ++ ++ addruart \rd ++ mov \rx, #0x83 @ DLAB = 1 ++ strb \rx, [\rd, #0x0c] ++ ++ mov \rx, #0x08 @ Divisor 8 => 115200 bps ++ strb \rx, [\rd, #0x00] ++ ++ mov \rx, #0x00 ++ strb \rx, [\rd, #0x04] @ Divisor high = 0 ++ ++ mov \rx, #0x03 ++ strb \rx, [\rd, #0x0c] @ DLAB = 0, n81 ++ ++ mov \rx, #0x00 ++ strb \rx, [\rd, #0x10] @ MCR = 0 ++ ++ mov \rx, #0x00 ++ strb \rx, [\rd, #0x28] @ disable autobaud ++ ++ mov \rx, #0x40 ++ strb \rx, [\rd, #0x04] @ IER UUE (UART Enable) + .endm + + #define UART_SHIFT 2 diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-eoc.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-eoc.patch new file mode 100644 index 0000000000..c5597728c7 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-eoc.patch @@ -0,0 +1,295 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-eoc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-eoc.c 2007-10-24 19:49:32.000000000 +0200 +@@ -0,0 +1,261 @@ ++/* ++ * EZX EOC Driver for Motorola EZX phones ++ * ++ * Copyright (C) 2007 Alex Zhang <celeber2@gmail.com> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/i2c.h> ++#include <linux/platform_device.h> ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx.h> ++#include <asm/arch/udc.h> ++ ++#if 1 ++#define EOC_DBG printk ++#else ++#define EOC_DBG(x, args...) ++#endif ++ ++#define REG_INT_STATUS 32 ++#define REG_INT_MASK 33 ++#define REG_INT_SENSE 34 ++#define REG_POWER_CONTROL_0 35 ++#define REG_POWER_CONTROL_1 36 ++#define REG_CONN_CONTROL 37 ++ ++#define EOC_REG_ADDR_SIZE 1 ++#define EOC_REG_DATA_SIZE 3 ++#define EOC_FUNC_NOTHING 0 ++#define EOC_FUNC_USB_NET 1 ++ ++static const char eoc_i2c_driver_name[] = "ezx-eoc"; ++static int eoc_func = EOC_FUNC_USB_NET; ++static struct pxa2xx_udc_mach_info ezx_udc_info; ++ ++static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter); ++static int ezx_eoc_detach_client(struct i2c_client *client); ++ ++static struct i2c_client *eoc_i2c_client = NULL; ++ ++static struct i2c_driver eoc_i2c_driver = { ++ .driver = { ++ .name = (char *)eoc_i2c_driver_name, ++ }, ++ .attach_adapter = ezx_eoc_attach_adapter, ++ .detach_client = ezx_eoc_detach_client, ++}; ++ ++int eoc_reg_read(int reg, unsigned int *reg_value) ++{ ++ unsigned char reg_num = reg; ++ unsigned char value[EOC_REG_DATA_SIZE]; ++ int retval; ++ ++ struct i2c_msg msgs[2] = ++ { ++ { eoc_i2c_client->addr, 0, EOC_REG_ADDR_SIZE, ®_num }, ++ { eoc_i2c_client->addr, I2C_M_RD, EOC_REG_DATA_SIZE, value } ++ }; ++ ++ /* transfer message to client */ ++ retval = i2c_transfer(eoc_i2c_client->adapter, msgs, 2); ++ if (retval < 0) ++ return retval; ++ ++ *reg_value = (value[2] << 0); ++ *reg_value |= (value[1] << 8); ++ *reg_value |= (value[0] << 16); ++ return 0; ++} ++ ++int eoc_reg_write(int reg, unsigned int reg_value) ++{ ++ unsigned char value[EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE]; ++ int retval; ++ ++ /* Copy the data into a buffer into the correct format */ ++ value[0] = reg; ++ value[1] = (reg_value >> 16) & 0xFF; ++ value[2] = (reg_value >> 8) & 0xFF; ++ value[3] = (reg_value >> 0) & 0xFF; ++ ++ /* Write the data to the EOC */ ++ retval = i2c_master_send (eoc_i2c_client, value, EOC_REG_ADDR_SIZE + EOC_REG_DATA_SIZE); ++ if (retval < 0) ++ return retval; ++ return 0; ++} ++ ++static void eoc_switch_to_usb(void) ++{ ++ EOC_DBG("EOC: Switching to USB\n"); ++ pxa_gpio_mode(GPIO34_USB_P2_2_MD); ++ pxa_gpio_mode(GPIO35_USB_P2_1_MD); ++ pxa_gpio_mode(GPIO36_USB_P2_4_MD); ++ pxa_gpio_mode(GPIO39_USB_P2_6_MD); ++ pxa_gpio_mode(GPIO40_USB_P2_5_MD); ++ pxa_gpio_mode(GPIO53_USB_P2_3_MD); ++ UP2OCR = 0x02000000; ++ /* FIXME change eoc bits to USB */ ++ ++} ++ ++static void eoc_switch_to_nothing(void) ++{ ++ EOC_DBG("EOC: Switching do disconnected\n"); ++ pxa_gpio_mode(GPIO34_TXENB | GPIO_OUT); ++ set_GPIO(GPIO34_TXENB); ++ pxa_gpio_mode(GPIO35_XRXD | GPIO_IN); ++ pxa_gpio_mode(GPIO36_VMOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO39_VPOUT | GPIO_IN); ++ pxa_gpio_mode(GPIO40_VPIN | GPIO_IN); ++ pxa_gpio_mode(GPIO53_VMIN | GPIO_IN); ++ /* FIXME disconnect mini usb port */ ++} ++ ++static void eoc_switch_to_default(void) ++{ ++ switch (eoc_func) { ++ case EOC_FUNC_USB_NET: ++ eoc_switch_to_usb(); ++ break; ++ case EOC_FUNC_NOTHING: ++ eoc_switch_to_nothing(); ++ break; ++ } ++} ++ ++static int ezx_eoc_attach_adapter(struct i2c_adapter *adapter) ++{ ++ int err = 0; ++ EOC_DBG(">>>>attach adapter enter\n"); ++ ++ if (eoc_i2c_client != NULL) { ++ EOC_DBG(">>>>already loaded!!!\n"); ++ return 0; ++ } ++ ++ if (!(eoc_i2c_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL))) ++ return -ENOMEM; ++ ++ eoc_i2c_client->addr = 0x17; ++ eoc_i2c_client->adapter = adapter; ++ eoc_i2c_client->driver = &eoc_i2c_driver; ++ eoc_i2c_client->flags = 0; ++ strlcpy(eoc_i2c_client->name, eoc_i2c_driver_name, I2C_NAME_SIZE); ++ ++ if ((err = i2c_attach_client(eoc_i2c_client))) { ++ kfree(eoc_i2c_client); ++ eoc_i2c_client = NULL; ++ return err; ++ } ++ eoc_reg_write(REG_INT_MASK, 0x0000FEF); ++ eoc_reg_write(REG_POWER_CONTROL_0, 0x0000C00); ++ eoc_reg_write(REG_POWER_CONTROL_1, 0x000000C); ++ eoc_reg_write(REG_CONN_CONTROL,0x0021044); ++ ++ eoc_switch_to_default(); ++ EOC_DBG(">>>>attach adapter exit\n"); ++ return 0; ++ ++} ++ ++static int ezx_eoc_detach_client(struct i2c_client *client) ++{ ++ return i2c_detach_client(client); ++} ++ ++static int __init ezx_eoc_probe(struct platform_device *dev) ++{ ++ int ret; ++ ++ ret = i2c_add_driver(&eoc_i2c_driver); ++ if (ret != 0) ++ return -EINVAL; ++ ++ pxa_set_udc_info(&ezx_udc_info); ++ ++ return 0; ++} ++ ++static int ezx_eoc_remove(struct platform_device *dev) ++{ ++ i2c_del_driver(&eoc_i2c_driver); ++ return 0; ++} ++ ++static int ezx_eoc_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ eoc_switch_to_nothing(); ++ return 0; ++} ++ ++static int ezx_eoc_resume(struct platform_device *dev) ++{ ++ eoc_switch_to_default(); ++ return 0; ++} ++ ++/* USB Device Controller */ ++static int udc_connected_status; ++static void ezx_udc_command(int cmd) ++{ ++ switch (cmd) { ++ case PXA2XX_UDC_CMD_DISCONNECT: ++ printk(KERN_NOTICE "USB cmd disconnect\n"); ++// ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,0); ++ udc_connected_status = 0; ++ break; ++ case PXA2XX_UDC_CMD_CONNECT: ++ printk(KERN_NOTICE "USB cmd connect\n"); ++// ezx_pcap_bit_set(PCAP_BIT_BUSCTRL_USB_PU,1); ++ udc_connected_status = 1; ++ break; ++ } ++} ++ ++static int ezx_udc_is_connected(void) ++{ ++ return udc_connected_status; ++} ++ ++static struct pxa2xx_udc_mach_info ezx_udc_info __initdata = { ++ .udc_is_connected = ezx_udc_is_connected, ++ .udc_command = ezx_udc_command, ++}; ++ ++static struct platform_driver ezx_eoc_driver = { ++ .probe = ezx_eoc_probe, ++ .remove = ezx_eoc_remove, ++ .suspend = ezx_eoc_suspend, ++ .resume = ezx_eoc_resume, ++ .driver = { ++ .name = "ezx-eoc", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++int __init ezx_eoc_init(void) ++{ ++ return platform_driver_register(&ezx_eoc_driver); ++} ++ ++void ezx_eoc_exit(void) ++{ ++ return platform_driver_unregister(&ezx_eoc_driver); ++} ++ ++MODULE_AUTHOR("Alex Zhang <celeber2@gmail.com>"); ++MODULE_DESCRIPTION("EZX EOC I2C driver"); ++MODULE_LICENSE("GPL"); ++ ++module_init(ezx_eoc_init); ++module_exit(ezx_eoc_exit); +Index: linux-2.6.23/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Kconfig 2007-10-24 19:37:27.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Kconfig 2007-10-24 19:37:27.000000000 +0200 +@@ -112,6 +112,12 @@ + config EZX_PCAP + bool "PCAP Support" + ++config EZX_EOC ++ tristate "EOC i2c driver of Motorola EZX phones" ++ depends on I2C && EXPERIMENTAL ++ help ++ EOC i2c driver of Motorola EZX phones ++ + config EZX_EMU + bool "Motorola Enchanced Mini Usb" + depends on EZX_PCAP +Index: linux-2.6.23/arch/arm/mach-pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Makefile 2007-10-24 19:37:27.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Makefile 2007-10-24 19:37:27.000000000 +0200 +@@ -28,6 +28,7 @@ + obj-$(CONFIG_EZX_BP) += ezx-bp.o + obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o + obj-$(CONFIG_EZX_EMU) += ezx-emu.o ++obj-$(CONFIG_EZX_EOC) += ezx-eoc.o + + # Support for blinky lights + led-y := leds.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-mtd-map.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-mtd-map.patch new file mode 100644 index 0000000000..2dd45d2a17 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-mtd-map.patch @@ -0,0 +1,309 @@ +Index: linux-2.6.23/drivers/mtd/maps/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/mtd/maps/Kconfig 2007-10-10 09:38:44.000000000 +0200 ++++ linux-2.6.23/drivers/mtd/maps/Kconfig 2007-10-22 22:19:57.000000000 +0200 +@@ -605,6 +605,34 @@ + help + This enables access to the flash chip on the Sharp SL Series of PDAs. + ++config MTD_EZX ++ tristate "Map driver for Motorola EZX Platform" ++ depends on MTD && PXA_EZX ++ ++if MTD_EZX ++ ++choice ++ prompt "Select partition mapping for EZX platform" ++ ++config MTD_EZX_A780 ++ bool "A780/E680 Original Mapping" ++ ++config MTD_EZX_A780_ALTERNATE ++ bool "A780/E680 Alternate Mapping for BLOB2" ++ ++config MTD_EZX_A1200 ++ bool "A1200 Original Mapping" ++ ++config MTD_EZX_E2 ++ bool "E2 Original Mapping" ++ ++config MTD_EZX_E6 ++ bool "E6 Original Mapping" ++ ++endchoice ++ ++endif ++ + config MTD_PLATRAM + tristate "Map driver for platform device RAM (mtd-ram)" + select MTD_RAM +Index: linux-2.6.23/drivers/mtd/maps/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-10-10 09:38:44.000000000 +0200 ++++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-10-22 22:19:57.000000000 +0200 +@@ -71,3 +71,4 @@ + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o + obj-$(CONFIG_MTD_TQM834x) += tqm834x.o ++obj-$(CONFIG_MTD_EZX) += ezx-flash.o +Index: linux-2.6.23/drivers/mtd/maps/ezx-flash.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mtd/maps/ezx-flash.c 2007-10-22 22:19:57.000000000 +0200 +@@ -0,0 +1,256 @@ ++/* ++ * Map driver for the PXA27x ++ * ++ * Author: Harald Welte ++ * Copyright: (C) 2001 MontaVista Software Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/dma-mapping.h> ++#include <linux/slab.h> ++ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/map.h> ++#include <linux/mtd/partitions.h> ++ ++#include <asm/io.h> ++#include <asm/hardware.h> ++#include <asm/cacheflush.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/mainstone.h> ++ ++#define WINDOW_ADDR 0x0 ++#define WINDOW_SIZE (32*1024*1024) ++#define WINDOW_CACHE_ADDR 0x0 ++#define WINDOW_CACHE_SIZE 0x1a00000 ++ ++static void pxa27x_map_inval_cache(struct map_info *map, unsigned long from, ++ ssize_t len) ++{ ++ flush_ioremap_region(map->phys, map->cached, from, len); ++} ++ ++ ++struct map_info pxa27x_map = { ++ .name = "PXA27x flash", ++ .size = WINDOW_SIZE, ++ .phys = WINDOW_ADDR, ++ .inval_cache = &pxa27x_map_inval_cache, ++}; ++ ++#if defined CONFIG_MTD_EZX_A780_ALTERNATE ++static struct mtd_partition pxa27x_partitions[] = { ++ { ++ .name = "Bootloader (RO)", ++ .size = 0x00020000, ++ .offset = 0, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "Bootloader 2", ++ .size = 0x00020000, ++ .offset = 0x00020000, ++ } , { ++ .name = "Moto Kernel", ++ .size = 0x000e0000, // 896KB ++ .offset = 0x00040000, ++ } , { ++ .name = "rootfs", ++ .size = 0x01760000, ++ .offset = 0x00120000, ++ } , { ++ .name = "OpenEZX Kernel", ++ .size = 0x00180000, // 1.5MB ++ .offset = 0x01880000, ++ } , { ++ .name = "ezxlocal", ++ .size = 0x005a0000, ++ .offset = 0x01a00000, ++ } , { ++ .name = "setup", ++ .size = 0x00020000, ++ .offset = 0x01fa0000, ++ } , { ++ .name = "Logo", ++ .size = 0x00020000, ++ .offset = 0x01fc0000, ++ }, ++}; ++#elif defined CONFIG_MTD_EZX_A780 ++static struct mtd_partition pxa27x_partitions[] = { ++ { ++ .name = "Bootloader", ++ .size = 0x00020000, ++ .offset = 0, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "Kernel", ++ .size = 0x000e0000, ++ .offset = 0x00020000, ++ } , { ++ .name = "rootfs", ++ .size = 0x018e0000, ++ .offset = 0x00120000, ++ } , { ++ .name = "VFM_Filesystem", ++ .size = 0x00580000, ++ .offset = 0x01a00000, ++ } , { ++ .name = "setup", ++ .size = 0x00020000, ++ .offset = 0x01fa0000, ++ } , { ++ .name = "Logo", ++ .size = 0x00020000, ++ .offset = 0x01fc0000, ++ }, ++}; ++#elif defined CONFIG_MTD_EZX_A1200 ++static struct mtd_partition pxa27x_partitions[] = { ++ { ++ .name = "Caddo 2", ++ .size = 0x00008000, ++ .offset = 0, ++ }, { ++ .name = "Itunes", ++ .size = 0x00008000, ++ .offset = 0x00008000, ++ }, { ++ .name = "Caddo 1", ++ .size = 0x00008000, ++ .offset = 0x00010000, ++ }, { ++ .name = "Fota rev", ++ .size = 0x00008000, ++ .offset = 0x00018000, ++ }, { ++ .name = "MBM", ++ .size = 0x00040000, ++ .offset = 0x00020000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "Blob", ++ .size = 0x00020000, ++ .offset = 0x00080000, ++ .mask_flags = MTD_WRITEABLE, ++ }, { ++ .name = "Kernel", ++ .size = 0x00100000, ++ .offset = 0x000A0000, ++ } , { ++ .name = "UserFS DB", ++ .size = 0x00600000, ++ .offset = 0x00AA0000, ++ }, { ++ .name = "UserFS", ++ .size = 0x007E0000, ++ .offset = 0x010A0000, ++ }, { ++ .name = "Test cmd", ++ .size = 0x00020000, ++ .offset = 0x018C0000, ++ } , { ++ .name = "Logo", ++ .size = 0x00020000, ++ .offset = 0x018E0000, ++ } , { ++ .name = "Fota", ++ .size = 0x000c0000, ++ .offset = 0x01900000, ++ }, { ++ .name = "Reserve", ++ .size = 0x00020000, ++ .offset = 0x019c0000, ++ } ++}; ++#else ++#error "please define partition for this PXA27x implementation" ++#endif ++ ++ ++static struct mtd_info *mymtd; ++static struct mtd_partition *parsed_parts; ++ ++static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; ++ ++static int __init init_pxa27x(void) ++{ ++ struct mtd_partition *parts; ++ int nb_parts = 0; ++ int parsed_nr_parts = 0; ++ char *part_type = "static"; ++ ++ pxa27x_map.bankwidth = (BOOT_DEF & 1) ? 2 : 4; ++ ++ printk("Probing PXA27x flash at physical address 0x%08x (%d-bit bankwidth)\n", ++ WINDOW_ADDR, pxa27x_map.bankwidth * 8); ++ pxa27x_map.virt = ioremap(pxa27x_map.phys, pxa27x_map.size); ++ ++ if (!pxa27x_map.virt) { ++ printk("Failed to ioremap\n"); ++ return -EIO; ++ } ++ ++ mymtd = do_map_probe("cfi_probe", &pxa27x_map); ++ if (!mymtd) { ++ iounmap((void *)pxa27x_map.virt); ++ return -ENXIO; ++ } ++ mymtd->owner = THIS_MODULE; ++ ++ simple_map_init(&pxa27x_map); ++ ++ if (parsed_nr_parts == 0) { ++ int ret = parse_mtd_partitions(mymtd, probes, &parsed_parts, 0); ++ ++ if (ret > 0) { ++ part_type = "RedBoot"; ++ parsed_nr_parts = ret; ++ } ++ } ++ ++ if (parsed_nr_parts > 0) { ++ parts = parsed_parts; ++ nb_parts = parsed_nr_parts; ++ } else { ++ parts = pxa27x_partitions; ++ nb_parts = ARRAY_SIZE(pxa27x_partitions); ++ } ++ ++ if (nb_parts) { ++ printk(KERN_NOTICE "Using %s partition definition\n", part_type); ++ add_mtd_partitions(mymtd, parts, nb_parts); ++ } else { ++ add_mtd_device(mymtd); ++ } ++ return 0; ++} ++ ++static void __exit cleanup_pxa27x(void) ++{ ++ if (mymtd) { ++ del_mtd_partitions(mymtd); ++ map_destroy(mymtd); ++ if (parsed_parts) ++ kfree(parsed_parts); ++ } ++ if (pxa27x_map.virt) ++ iounmap((void *)pxa27x_map.virt); ++ if (pxa27x_map.cached) ++ iounmap((void *)pxa27x_map.cached); ++ return; ++} ++ ++module_init(init_pxa27x); ++module_exit(cleanup_pxa27x); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>"); ++MODULE_DESCRIPTION("MTD map driver for Motorola EZX platform"); diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-pcap.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-pcap.patch new file mode 100644 index 0000000000..c917d4aa9e --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-pcap.patch @@ -0,0 +1,849 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/ezx-pcap.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx-pcap.c 2007-10-23 15:41:22.000000000 +0200 +@@ -0,0 +1,513 @@ ++/* Driver for Motorola PCAP2 as present in EZX phones ++ * ++ * This is both a SPI device driver for PCAP itself, as well as ++ * an IRQ demultiplexer for handling PCAP generated events such as ++ * headphone jack sense by downstream drivers. ++ * ++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org> ++ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++#include <linux/interrupt.h> ++#include <linux/kernel_stat.h> ++#include <linux/proc_fs.h> ++ ++#include <asm/hardware.h> ++#include <asm/mach-types.h> ++ ++#include <asm/arch/ezx.h> ++#include <asm/arch/ssp.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx-pcap.h> ++#include <asm/arch/irqs.h> ++#include <asm/mach/irq.h> ++ ++#if 0 ++#define DEBUGP(x, args...) printk(x, ## args) ++#else ++#define DEBUGP(x, args...) ++#endif ++ ++static DEFINE_SPINLOCK(ezx_ssp_lock); ++static struct ssp_dev ezx_ssp_dev; ++static struct ssp_state ezx_ssp_state; ++static struct pcap_platform_data *pcap_data; ++static int pcap_irq; ++ ++static unsigned long ezx_ssp_pcap_putget(ulong data) ++{ ++ unsigned long flag; ++ u32 ret = 0; ++ ++ spin_lock_irqsave(&ezx_ssp_lock, flag); ++ if (pcap_data->cs >= 0) { ++ if (pcap_data->flags & PCAP_CS_AH) ++ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ else ++ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ ++ ssp_write_word(&ezx_ssp_dev,data); ++ ssp_read_word(&ezx_ssp_dev, &ret); ++ ++ if (pcap_data->cs >= 0) { ++ if(pcap_data->flags & PCAP_CS_AH) ++ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ else ++ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ ++ spin_unlock_irqrestore(&ezx_ssp_lock, flag); ++ ++ return ret; ++} ++ ++int ezx_pcap_write(u_int8_t reg_num, u_int32_t value) ++{ ++ value &= PCAP_REGISTER_VALUE_MASK; ++ value |= PCAP_REGISTER_WRITE_OP_BIT ++ | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT); ++ ++ ezx_ssp_pcap_putget(value); ++ ++ DEBUGP("pcap write r%x: 0x%08x\n", reg_num, value); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(ezx_pcap_write); ++ ++int ezx_pcap_read(u_int8_t reg_num, u_int32_t *value) ++{ ++ u_int32_t frame = PCAP_REGISTER_READ_OP_BIT ++ | (reg_num<<PCAP_REGISTER_ADDRESS_SHIFT); ++ ++ *value = ezx_ssp_pcap_putget(frame); ++ ++ DEBUGP("pcap read r%x: 0x%08x\n", reg_num, *value); ++ return 0; ++} ++EXPORT_SYMBOL_GPL(ezx_pcap_read); ++ ++int ezx_pcap_bit_set(u_int32_t sspPcapBit, u_int8_t to) ++{ ++ int ret; ++ u_int32_t tmp; ++ u_int32_t bit = (sspPcapBit & PCAP_REGISTER_VALUE_MASK); ++ u_int8_t reg_num = (sspPcapBit & PCAP_REGISTER_ADDRESS_MASK) ++ >> PCAP_REGISTER_ADDRESS_SHIFT; ++ ++ ret = ezx_pcap_read(reg_num, &tmp); ++ if (ret < 0) ++ return ret; ++ ++ if (to == 0) ++ tmp &= ~bit; ++ else ++ tmp |= bit; ++ ++ return ezx_pcap_write(reg_num, tmp); ++} ++EXPORT_SYMBOL_GPL(ezx_pcap_bit_set); ++ ++int ezx_pcap_read_bit(u_int32_t bit) ++{ ++ int ret; ++ u_int32_t tmp; ++ u_int8_t reg_num = (bit & PCAP_REGISTER_ADDRESS_MASK) ++ >> PCAP_REGISTER_ADDRESS_SHIFT; ++ ++ ret = ezx_pcap_read(reg_num, &tmp); ++ if (ret < 0) ++ return ret; ++ ++ return tmp & (bit & PCAP_REGISTER_VALUE_MASK); ++} ++EXPORT_SYMBOL_GPL(ezx_pcap_read_bit); ++ ++/* /proc/pcap support */ ++#ifdef CONFIG_PROC_FS ++ ++static struct proc_dir_entry *proc_pcap; ++ ++char *pcap_registers[] = { ++ "ISR\t", "MSR\t", "PSTAT\t", "INT_SEL\t", "SWCTRL\t", "VREG1\t", ++ "VREG2\t", "VREG\t", "BATT_DAC", "ADC1\t", "ADC2\t", "AUD_CODEC", ++ "RX_AUD_AMPS", "ST_DAC\t", "RTC_TOD\t", "RTC_TODA", "RTC_DAY\t", ++ "RTC_DAYA", "MTRTMR\t", "PWRCTRL\t", "BUSCTRL\t", "PERIPH\t", ++ "AUXVREG_MASK", "VENDOR_REV", "LOWPWR_CTRL", "PERIPH_MASK", ++ "TX_AUD_AMPS", "GP\t", ++ NULL, NULL, NULL, NULL ++}; ++ ++static int pcap_read_proc(char *page, char **start, off_t off, int count, ++ int *eof, void *data_unused) ++{ ++ int len = 0; ++ u_int8_t r; ++ u_int32_t v; ++ off_t begin = 0; ++ ++ for(r=0;r<32;r++) { ++ if (pcap_registers[r] == NULL) ++ continue; ++ ezx_pcap_read(r, &v); ++ len += sprintf(page+len, "%s\t%08X\n", pcap_registers[r], v); ++ if(len + begin > off + count) ++ goto done; ++ if(len + begin < off) { ++ begin += len; ++ len = 0; ++ } ++ } ++ *eof = 1; ++done: ++ if (off >= len+begin) ++ return 0; ++ *start = page + (off-begin); ++ return ((count < begin+len-off) ? count : begin+len-off); ++} ++#endif ++ ++void ezx_pcap_vibrator_level(u_int32_t value) ++{ ++ u_int32_t tmp; ++ ++ ezx_pcap_read(PCAP_REG_AUXVREG, &tmp); ++ ++ tmp &= ~PCAP_AUXVREG_V_VIB_MASK; ++ tmp |= ((value << PCAP_AUXVREG_V_VIB_SHIFT) & PCAP_AUXVREG_V_VIB_MASK); ++ ++ ezx_pcap_write(PCAP_REG_AUXVREG, tmp); ++} ++EXPORT_SYMBOL_GPL(ezx_pcap_vibrator_level); ++ ++/* MMC/SD specific functions */ ++ ++void ezx_pcap_mmcsd_voltage(u_int32_t bits) ++{ ++ unsigned int tmp; ++ ezx_pcap_read(PCAP_REG_AUXVREG, &tmp); ++ if (pcap_data->flags & PCAP_MCI_SD) { ++ tmp &= ~PCAP_AUXVREG_VAUX2_MASK; ++ tmp |= ((bits << PCAP_AUXVREG_VAUX2_SHIFT) & ++ PCAP_AUXVREG_VAUX2_MASK); ++ } ++ else if (pcap_data->flags & PCAP_MCI_TF) { ++ tmp &= ~PCAP_AUXVREG_VAUX3_MASK; ++ tmp |= ((bits << PCAP_AUXVREG_VAUX3_SHIFT) & ++ PCAP_AUXVREG_VAUX3_MASK); ++ } ++ ezx_pcap_write(PCAP_REG_AUXVREG, tmp); ++} ++EXPORT_SYMBOL(ezx_pcap_mmcsd_voltage); ++ ++int ezx_pcap_mmcsd_power(int on) ++{ ++ if (on > 0) on = 1; ++ else on = 0; ++ ++ if (pcap_data->flags & PCAP_MCI_SD) ++ return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX2_EN, on); ++ else if (pcap_data->flags & PCAP_MCI_TF) ++ return ezx_pcap_bit_set(PCAP_BIT_AUXVREG_VAUX3_EN, on); ++ else ++ return -ENODEV; ++} ++EXPORT_SYMBOL_GPL(ezx_pcap_mmcsd_power); ++ ++/* IRQ Handling */ ++ ++/* Array indexed by BIT POSITION of PCAP register, returns IRQ number */ ++static unsigned int pcap2irq[] = { ++ [0] = EZX_IRQ_ADCDONE, ++ [1] = EZX_IRQ_TS, ++ [2] = EZX_IRQ_1HZ, /* 1HZ */ ++ [3] = EZX_IRQ_WH, /* WH */ ++ [4] = EZX_IRQ_WL, /* WL */ ++ [5] = EZX_IRQ_TODA, /* TODA */ ++ [6] = EZX_IRQ_USB4V, ++ [7] = EZX_IRQ_ONOFF, /* ONOFF */ ++ [8] = EZX_IRQ_ONOFF2, /* ONOFF2 */ ++ [9] = EZX_IRQ_USB1V, ++ [10] = EZX_IRQ_MOBPORT, /* MOBPORT */ ++ [11] = EZX_IRQ_MIC, ++ [12] = EZX_IRQ_HEADJACK, ++ [13] = EZX_IRQ_ST, /* ST */ ++ [14] = EZX_IRQ_PC, /* PC */ ++ [15] = EZX_IRQ_WARM, /* WARM */ ++ [16] = EZX_IRQ_EOL, /* EOL */ ++ [17] = EZX_IRQ_CLK, /* CLK */ ++ [18] = EZX_IRQ_SYSRST, /* SYSRST */ ++ [19] = 0, ++ [20] = EZX_IRQ_ADCDONE2, ++ [21] = EZX_IRQ_SOFTRESET, /* SOFTRESET */ ++ [22] = EZX_IRQ_MNEXB, /* MNEXB */ ++}; ++ ++/* Array indexed by IRQ NUMBER, returns PCAP absolute value */ ++static unsigned int irq2pcap[] = { ++ [EZX_IRQ_MNEXB] = PCAP_IRQ_MNEXB, ++ [EZX_IRQ_SOFTRESET] = PCAP_IRQ_SOFTRESET, ++ [EZX_IRQ_SYSRST] = PCAP_IRQ_SYSRST, ++ [EZX_IRQ_CLK] = PCAP_IRQ_CLK, ++ [EZX_IRQ_EOL] = PCAP_IRQ_EOL, ++ [EZX_IRQ_WARM] = PCAP_IRQ_WARM, ++ [EZX_IRQ_PC] = PCAP_IRQ_PC, ++ [EZX_IRQ_ST] = PCAP_IRQ_ST, ++ [EZX_IRQ_MOBPORT] = PCAP_IRQ_MOBPORT, ++ [EZX_IRQ_ONOFF2] = PCAP_IRQ_ONOFF2, ++ [EZX_IRQ_ONOFF] = PCAP_IRQ_ONOFF, ++ [EZX_IRQ_TODA] = PCAP_IRQ_TODA, ++ [EZX_IRQ_WL] = PCAP_IRQ_WL, ++ [EZX_IRQ_WH] = PCAP_IRQ_WH, ++ [EZX_IRQ_1HZ] = PCAP_IRQ_1HZ, ++ [EZX_IRQ_USB4V] = PCAP_IRQ_USB4V, ++ [EZX_IRQ_USB1V] = PCAP_IRQ_USB1V, ++ [EZX_IRQ_HEADJACK] = PCAP_IRQ_A1, ++ [EZX_IRQ_MIC] = PCAP_IRQ_MB2, ++ [EZX_IRQ_TS] = PCAP_IRQ_TS, ++ [EZX_IRQ_ADCDONE] = PCAP_IRQ_ADCDONE, ++ [EZX_IRQ_ADCDONE2] = PCAP_IRQ_ADCDONE2, ++}; ++ ++static void pcap_ack_irq(unsigned int irq) ++{ ++ DEBUGP("pcap_ack_irq: %u\n", irq); ++ ezx_pcap_write(PCAP_REG_ISR, irq2pcap[irq]); ++} ++ ++static void pcap_mask_irq(unsigned int irq) ++{ ++ u_int32_t reg; ++ unsigned long flag; ++ ++ spin_lock_irqsave(&ezx_ssp_lock, flag); ++ DEBUGP("pcap_mask_irq: %u\n", irq); ++ ezx_pcap_read(PCAP_REG_MSR, ®); ++ reg |= irq2pcap[irq]; ++ ezx_pcap_write(PCAP_REG_MSR, reg); ++ spin_unlock_irqrestore(&ezx_ssp_lock, flag); ++} ++ ++static void pcap_unmask_irq(unsigned int irq) ++{ ++ u_int32_t tmp; ++ unsigned long flag; ++ ++ spin_lock_irqsave(&ezx_ssp_lock, flag); ++ DEBUGP("pcap_unmask_irq: %u\n", irq); ++ ezx_pcap_read(PCAP_REG_MSR, &tmp); ++ tmp &= ~irq2pcap[irq]; ++ ezx_pcap_write(PCAP_REG_MSR, tmp); ++ spin_unlock_irqrestore(&ezx_ssp_lock, flag); ++} ++ ++static struct irq_chip pcap_chip = { ++ .ack = pcap_ack_irq, ++ .mask = pcap_mask_irq, ++ .unmask = pcap_unmask_irq, ++}; ++ ++/* handler for interrupt received from PCAP via GPIO */ ++static void pcap_irq_demux_handler(unsigned int irq, struct irq_desc *desc) ++{ ++ const unsigned int cpu = smp_processor_id(); ++ int i; ++ u_int32_t isr, msr; ++ ++ spin_lock(&desc->lock); ++ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); ++ if (unlikely(desc->status & (IRQ_INPROGRESS | IRQ_DISABLED))) { ++ desc->status |= (IRQ_PENDING | IRQ_MASKED); ++ desc->chip->mask(irq); ++ desc->chip->ack(irq); ++ goto out_unlock; ++ } ++ kstat_cpu(cpu).irqs[irq]++; ++ desc->chip->ack(irq); ++ desc->status |= IRQ_INPROGRESS; ++ do { ++ if (unlikely((desc->status & ++ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) == ++ (IRQ_PENDING | IRQ_MASKED))) { ++ desc->chip->unmask(irq); ++ desc->status &= ~IRQ_MASKED; ++ } ++ desc->status &= ~IRQ_PENDING; ++ ++ ezx_pcap_read(PCAP_REG_ISR, &isr); ++ ezx_pcap_read(PCAP_REG_MSR, &msr); ++ for (i = ARRAY_SIZE(pcap2irq)-1; i >= 0; i--) { ++ unsigned int pirq = pcap2irq[i]; ++ struct irq_desc *subdesc; ++ if (pirq == 0 || !(isr & irq2pcap[pirq])) ++ continue; ++ subdesc = irq_desc + pirq; ++ if (msr & irq2pcap[pirq]) ++ continue; ++ DEBUGP("found irq %u\n", pirq); ++ spin_unlock(&desc->lock); ++ desc_handle_irq(pirq, subdesc); ++ spin_lock(&desc->lock); ++ } ++ ++ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING); ++ ++ desc->status &= ~IRQ_INPROGRESS; ++out_unlock: ++ spin_unlock(&desc->lock); ++} ++ ++static int ezx_pcap_remove(struct platform_device *pdev) ++{ ++ int irq; ++ DEBUGP("exz_pcap_remove entered\n"); ++ ++ set_irq_chained_handler(pcap_irq, NULL); ++ ++ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) { ++ set_irq_chip(irq, NULL); ++ set_irq_handler(irq, NULL); ++ set_irq_flags(irq, 0); ++ } ++ ++ ssp_exit(&ezx_ssp_dev); ++ ++ return 0; ++} ++ ++static int __init ezx_pcap_probe(struct platform_device *pdev) ++{ ++ unsigned int ret, irq; ++ DEBUGP("ezx_pcap_probe entered\n"); ++ ++ pcap_data = pdev->dev.platform_data; ++ ++ /* configure ssp port */ ++ pxa_gpio_mode(29|GPIO_ALT_FN_3_OUT); ++ pxa_gpio_mode(GPIO24_SFRM_MD); ++ pxa_gpio_mode(GPIO25_STXD_MD); ++ pxa_gpio_mode(GPIO26_SRXD_MD); ++ ++ if (pcap_data->cs >= 0) { ++ if (pcap_data->flags & PCAP_CS_AH) ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT); ++ else ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT ++ | GPIO_DFLT_HIGH); ++ } ++ pcap_irq = platform_get_irq(pdev, 0); ++ if(pcap_irq < 0) { ++ printk(KERN_ERR "Unable to get IRQ for pcap!\n"); ++ return pcap_irq; ++ } ++ ++ ret = ssp_init(&ezx_ssp_dev, pcap_data->port, 0); ++ if (ret) { ++ printk(KERN_ERR "Unable to register SSP handler!\n"); ++ return ret; ++ } ++ ++ ssp_disable(&ezx_ssp_dev); ++ ssp_config(&ezx_ssp_dev, ++ (SSCR0_Motorola | SSCR0_DataSize(16) | SSCR0_EDSS), ++ (SSCR1_TxTresh(1) | SSCR1_RxTresh(1)), ++ 0, SSCR0_SerClkDiv(pcap_data->clk)); ++ ssp_enable(&ezx_ssp_dev); ++ ++ /* mask/ack all PCAP interrupts */ ++ ezx_pcap_write(PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT); ++ ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER); ++ ++ if (pcap_data->init) ++ pcap_data->init(); ++ ++ /* set up interrupt demultiplexing code for PCAP2 irqs */ ++ set_irq_type(pcap_irq, IRQT_RISING); ++ for (irq = EZX_IRQ(0); irq <= EZX_IRQ(21); irq++) { ++ set_irq_chip(irq, &pcap_chip); ++ set_irq_handler(irq, handle_level_irq); ++ set_irq_flags(irq, IRQF_VALID); ++ } ++ set_irq_chained_handler(pcap_irq, pcap_irq_demux_handler); ++ set_irq_wake(pcap_irq, 1); ++ ++ printk("ezx-pcap: ssp driver registered\n"); ++ return ret; ++} ++ ++static int ezx_pcap_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ DEBUGP("pcap suspend!\n"); ++ ssp_flush(&ezx_ssp_dev); ++ ssp_save_state(&ezx_ssp_dev, &ezx_ssp_state); ++ if (pcap_data->cs >= 0) ++ pxa_gpio_mode(pcap_data->cs | GPIO_IN); ++ return 0; ++} ++ ++static int ezx_pcap_resume(struct platform_device *dev) ++{ ++ DEBUGP("pcap resume!\n"); ++ ++ if (pcap_data->cs >= 0) { ++ if (pcap_data->flags & PCAP_CS_AH) { ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT); ++ GPCR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ else { ++ pxa_gpio_mode(pcap_data->cs | GPIO_OUT | GPIO_DFLT_HIGH); ++ GPSR(pcap_data->cs) = GPIO_bit(pcap_data->cs); ++ } ++ } ++ ssp_restore_state(&ezx_ssp_dev,&ezx_ssp_state); ++ ssp_enable(&ezx_ssp_dev); ++ ++ ezx_pcap_write(PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER); ++ ++ return 0; ++} ++ ++static struct platform_driver ezxpcap_driver = { ++ .probe = ezx_pcap_probe, ++ .remove = ezx_pcap_remove, ++ .suspend = ezx_pcap_suspend, ++ .resume = ezx_pcap_resume, ++ .driver = { ++ .name = "ezx-pcap", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ezx_pcap_init(void) ++{ ++ DEBUGP("ezx_pcap_init entered\n"); ++ ++#ifdef CONFIG_PROC_FS ++ if((proc_pcap = create_proc_entry("pcap", 0, NULL))) ++ proc_pcap->read_proc = pcap_read_proc; ++#endif ++ ++ return platform_driver_register(&ezxpcap_driver); ++} ++ ++static void __exit ezx_pcap_exit(void) ++{ ++#ifdef CONFIG_PROC_FS ++ if (proc_pcap) ++ remove_proc_entry("pcap", NULL); ++#endif ++ ++ return platform_driver_unregister(&ezxpcap_driver); ++} ++ ++module_init(ezx_pcap_init); ++module_exit(ezx_pcap_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Harald Welte"); ++MODULE_DESCRIPTION("SPI Driver for Motorola PCAP2"); ++ +Index: linux-2.6.23/include/asm-arm/arch-pxa/ezx-pcap.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/ezx-pcap.h 2007-10-23 15:41:20.000000000 +0200 +@@ -0,0 +1,248 @@ ++/* ++ * Copyright 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ */ ++ ++#ifndef EZX_PCAP_H ++#define EZX_PCAP_H ++ ++struct pcap_platform_data { ++ int port; /* SSP port */ ++ int cs; /* CS gpio */ ++ int clk; ++ int flags; /* driver flags */ ++ int (*init)(void); /* board specific driver init */ ++}; ++ ++/* driver configuration */ ++#define PCAP_CS_AH (1 << 0) /* CS pin is active high */ ++#define PCAP_MCI_SD (1 << 1) /* SD card slot */ ++#define PCAP_MCI_TF (1 << 2) /* TF card slot */ ++ ++#define PCAP_REGISTER_WRITE_OP_BIT 0x80000000 ++#define PCAP_REGISTER_READ_OP_BIT 0x00000000 ++ ++#define PCAP_REGISTER_VALUE_MASK 0x01ffffff ++#define PCAP_REGISTER_ADDRESS_MASK 0x7c000000 ++#define PCAP_REGISTER_ADDRESS_SHIFT 26 ++#define PCAP_REGISTER_NUMBER 32 ++#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff ++#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff ++ ++ ++#define pbit(reg, bit) ((reg << PCAP_REGISTER_ADDRESS_SHIFT) | bit) ++ ++/* registers acessible by both pcap ports */ ++#define PCAP_REG_ISR 0x0 /* Interrupt Status */ ++#define PCAP_REG_MSR 0x1 /* Interrupt Mask */ ++#define PCAP_REG_PSTAT 0x2 /* Processor Status */ ++#define PCAP_REG_VREG2 0x6 /* Regulator Bank 2 Control */ ++#define PCAP_REG_AUXVREG 0x7 /* Auxiliary Regulator Control */ ++#define PCAP_REG_BATT 0x8 /* Battery Control */ ++#define PCAP_REG_ADC1 0x9 /* AD Control */ ++#define PCAP_REG_ADC2 0xa /* AD Result */ ++#define PCAP_REG_CODEC 0xb /* Audio Codec Control */ ++#define PCAP_REG_RX_AMPS 0xc /* RX Audio Amplifiers Control */ ++#define PCAP_REG_ST_DAC 0xd /* Stereo DAC Control */ ++#define PCAP_REG_BUSCTRL 0x14 /* Connectivity Control */ ++#define PCAP_REG_PERIPH 0x15 /* Peripheral Control */ ++#define PCAP_REG_LOWPWR 0x18 /* Regulator Low Power Control */ ++#define PCAP_REG_TX_AMPS 0x1a /* TX Audio Amplifiers Control */ ++#define PCAP_REG_GP 0x1b /* General Purpose */ ++ ++/* registers acessible by pcap port 1 only (a1200, e2 & e6) */ ++#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */ ++#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */ ++#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */ ++#define PCAP_REG_RTC_TOD 0xe /* RTC Time of Day */ ++#define PCAP_REG_RTC_TODA 0xf /* RTC Time of Day Alarm */ ++#define PCAP_REG_RTC_DAY 0x10 /* RTC Day */ ++#define PCAP_REG_RTC_DAYA 0x11 /* RTC Day Alarm */ ++#define PCAP_REG_MTRTMR 0x12 /* AD Monitor Timer */ ++#define PCAP_REG_PWR 0x13 /* Power Control */ ++#define PCAP_REG_AUXVREG_MASK 0x16 /* Auxiliary Regulator Mask */ ++#define PCAP_REG_VENDOR_REV 0x17 ++#define PCAP_REG_PERIPH_MASK 0x19 /* Peripheral Mask */ ++ ++/* interrupts - registers 0, 1, 2, 3 */ ++#define PCAP_IRQ_ADCDONE (1 << 0) /* AD Conversion Done Port 1 */ ++#define PCAP_IRQ_TS (1 << 1) /* Touch Screen */ ++#define PCAP_IRQ_1HZ (1 << 2) /* 1HZ Timer */ ++#define PCAP_IRQ_WH (1 << 3) ++#define PCAP_IRQ_WL (1 << 4) ++#define PCAP_IRQ_TODA (1 << 5) ++#define PCAP_IRQ_USB4V (1 << 6) ++#define PCAP_IRQ_ONOFF (1 << 7) ++#define PCAP_IRQ_ONOFF2 (1 << 8) ++#define PCAP_IRQ_USB1V (1 << 9) ++#define PCAP_IRQ_MOBPORT (1 << 10) ++#define PCAP_IRQ_MB2 (1 << 11) /* Mic */ ++#define PCAP_IRQ_A1 (1 << 12) /* Audio jack */ ++#define PCAP_IRQ_ST (1 << 13) ++#define PCAP_IRQ_PC (1 << 14) ++#define PCAP_IRQ_WARM (1 << 15) ++#define PCAP_IRQ_EOL (1 << 16) ++#define PCAP_IRQ_CLK (1 << 17) ++#define PCAP_IRQ_SYSRST (1 << 18) ++#define PCAP_IRQ_ADCDONE2 (1 << 20) /* AD Conversion Done Port 2 */ ++#define PCAP_IRQ_SOFTRESET (1 << 21) ++#define PCAP_IRQ_MNEXB (1 << 22) ++ ++#define PCAP_BIT_VREG2_V1_STBY pbit(PCAP_REG_VREG2, (1 << 0)) ++#define PCAP_BIT_VREG2_V2_STBY pbit(PCAP_REG_VREG2, (1 << 1)) ++#define PCAP_BIT_VREG2_V3_STBY pbit(PCAP_REG_VREG2, (1 << 2)) ++#define PCAP_BIT_VREG2_V4_STBY pbit(PCAP_REG_VREG2, (1 << 3)) ++#define PCAP_BIT_VREG2_V5_STBY pbit(PCAP_REG_VREG2, (1 << 4)) ++#define PCAP_BIT_VREG2_V6_STBY pbit(PCAP_REG_VREG2, (1 << 5)) ++#define PCAP_BIT_VREG2_V7_STBY pbit(PCAP_REG_VREG2, (1 << 6)) ++#define PCAP_BIT_VREG2_V8_STBY pbit(PCAP_REG_VREG2, (1 << 7)) ++#define PCAP_BIT_VREG2_V9_STBY pbit(PCAP_REG_VREG2, (1 << 8)) ++#define PCAP_BIT_VREG2_V10_STBY pbit(PCAP_REG_VREG2, (1 << 9)) ++#define PCAP_BIT_VREG2_V1_LOWPWR pbit(PCAP_REG_VREG2, (1 << 10)) ++#define PCAP_BIT_VREG2_V2_LOWPWR pbit(PCAP_REG_VREG2, (1 << 11)) ++#define PCAP_BIT_VREG2_V3_LOWPWR pbit(PCAP_REG_VREG2, (1 << 12)) ++#define PCAP_BIT_VREG2_V4_LOWPWR pbit(PCAP_REG_VREG2, (1 << 13)) ++#define PCAP_BIT_VREG2_V5_LOWPWR pbit(PCAP_REG_VREG2, (1 << 14)) ++#define PCAP_BIT_VREG2_V6_LOWPWR pbit(PCAP_REG_VREG2, (1 << 15)) ++#define PCAP_BIT_VREG2_V7_LOWPWR pbit(PCAP_REG_VREG2, (1 << 16)) ++#define PCAP_BIT_VREG2_V8_LOWPWR pbit(PCAP_REG_VREG2, (1 << 17)) ++#define PCAP_BIT_VREG2_V9_LOWPWR pbit(PCAP_REG_VREG2, (1 << 18)) ++#define PCAP_BIT_VREG2_V10_LOWPWR pbit(PCAP_REG_VREG2, (1 << 19)) ++ ++#define PCAP_BIT_AUXVREG_VAUX1_EN pbit(PCAP_REG_AUXVREG, (1 << 1)) ++#define PCAP_AUXVREG_VAUX1_MASK 0x0000000c ++#define PCAP_AUXVREG_VAUX1_SHIFT 2 ++#define PCAP_BIT_AUXVREG_VAUX2_EN pbit(PCAP_REG_AUXVREG, (1 << 4)) ++#define PCAP_AUXVREG_VAUX2_MASK 0x00000060 ++#define PCAP_AUXVREG_VAUX2_SHIFT 5 ++#define PCAP_BIT_AUXVREG_VAUX3_EN pbit(PCAP_REG_AUXVREG, (1 << 7)) ++#define PCAP_AUXVREG_VAUX3_MASK 0x00000f00 ++#define PCAP_AUXVREG_VAUX3_SHIFT 8 ++#define PCAP_BIT_AUXVREG_VAUX4_EN pbit(PCAP_REG_AUXVREG, (1 << 12)) ++#define PCAP_AUXVREG_VAUX4_MASK 0x00006000 ++#define PCAP_AUXVREG_VAUX4_SHIFT 13 ++#define PCAP_BIT_AUXVREG_VSIM2_EN pbit(PCAP_REG_AUXVREG, (1 << 16)) ++#define PCAP_BIT_AUXVREG_VSIM_EN pbit(PCAP_REG_AUXVREG, (1 << 17)) ++#define PCAP_BIT_AUXVREG_VSIM_0 pbit(PCAP_REG_AUXVREG, (1 << 18)) ++#define PCAP_BIT_AUXVREG_V_VIB_EN pbit(PCAP_REG_AUXVREG, (1 << 19)) ++#define PCAP_AUXVREG_V_VIB_MASK 0x00300000 ++#define PCAP_AUXVREG_V_VIB_SHIFT 20 ++#define PCAP_BIT_AUXVREG_VAUX1_STBY pbit(PCAP_REG_AUXVREG, (1 << 22)) ++#define PCAP_BIT_AUXVREG_VAUX1_LOWPWR pbit(PCAP_REG_AUXVREG, (1 << 23)) ++#define PCAP_BIT_AUXVREG_SW3_STBY pbit(PCAP_REG_AUXVREG, (1 << 24)) ++ ++#define PCAP_BATT_DAC_MASK 0x000000ff ++#define PCAP_BATT_DAC_SHIFT 0 ++#define PCAP_BIT_BATT_B_FDBK pbit(PCAP_REG_BATT, (1 << 8)) ++#define PCAP_BIT_BATT_EXT_ISENSE pbit(PCAP_REG_BATT, (1 << 9)) ++#define PCAP_BATT_V_COIN_MASK 0x00003c00 ++#define PCAP_BATT_V_COIN_SHIFT 10 ++#define PCAP_BIT_BATT_I_COIN pbit(PCAP_REG_BATT, (1 << 14)) ++#define PCAP_BIT_BATT_COIN_CH_EN pbit(PCAP_REG_BATT, (1 << 15)) ++#define PCAP_BATT_EOL_SEL_MASK 0x000e0000 ++#define PCAP_BATT_EOL_SEL_SHIFT 17 ++#define PCAP_BIT_BATT_EOL_CMP_EN pbit(PCAP_REG_BATT, (1 << 20)) ++#define PCAP_BIT_BATT_BATT_DET_EN pbit(PCAP_REG_BATT, (1 << 21)) ++#define PCAP_BIT_BATT_THERMBIAS_CTRL pbit(PCAP_REG_BATT, (1 << 22)) ++ ++#define PCAP_BIT_ADC1_ADEN pbit(PCAP_REG_ADC1, (1 << 0)) ++#define PCAP_BIT_ADC1_RAND pbit(PCAP_REG_ADC1, (1 << 1)) ++#define PCAP_BIT_ADC1_AD_SEL1 pbit(PCAP_REG_ADC1, (1 << 2)) ++#define PCAP_BIT_ADC1_AD_SEL2 pbit(PCAP_REG_ADC1, (1 << 3)) ++#define PCAP_ADC1_ADA1_MASK 0x00000070 ++#define PCAP_ADC1_ADA1_SHIFT 4 ++#define PCAP_ADC1_ADA2_MASK 0x00000380 ++#define PCAP_ADC1_ADA2_SHIFT 7 ++#define PCAP_ADC1_ATO_MASK 0x00003c00 ++#define PCAP_ADC1_ATO_SHIFT 10 ++#define PCAP_BIT_ADC1_ATOX pbit(PCAP_REG_ADC1, (1 << 14)) ++#define PCAP_BIT_ADC1_MTR1 pbit(PCAP_REG_ADC1, (1 << 15)) ++#define PCAP_BIT_ADC1_MTR2 pbit(PCAP_REG_ADC1, (1 << 16)) ++#define PCAP_ADC1_TS_M_MASK 0x000e0000 ++#define PCAP_ADC1_TS_M_SHIFT 17 ++#define PCAP_BIT_ADC1_TS_REF_LOWPWR pbit(PCAP_REG_ADC1, (1 << 20)) ++#define PCAP_BIT_ADC1_TS_REFENB pbit(PCAP_REG_ADC1, (1 << 21)) ++#define PCAP_BIT_ADC1_BATT_I_POLARITY pbit(PCAP_REG_ADC1, (1 << 22)) ++#define PCAP_BIT_ADC1_BATT_I_ADC pbit(PCAP_REG_ADC1, (1 << 23)) ++ ++#define PCAP_ADC2_ADD1_MASK 0x000003ff ++#define PCAP_ADC2_ADD1_SHIFT 0 ++#define PCAP_ADC2_ADD2_MASK 0x000ffc00 ++#define PCAP_ADC2_ADD2_SHIFT 10 ++#define PCAP_BIT_ADC2_ADINC1 pbit(PCAP_REG_ADC2, (1 << 20)) ++#define PCAP_BIT_ADC2_ADINC2 pbit(PCAP_REG_ADC2, (1 << 21)) ++#define PCAP_BIT_ADC2_ASC pbit(PCAP_REG_ADC2, (1 << 22)) ++ ++#define PCAP_BIT_BUSCTRL_FSENB 0x50000001 ++#define PCAP_BIT_BUSCTRL_USB_SUSPEND 0x50000002 ++#define PCAP_BIT_BUSCTRL_USB_PU 0x50000004 ++#define PCAP_BIT_BUSCTRL_USB_PD 0x50000008 ++#define PCAP_BIT_BUSCTRL_VUSB_EN 0x50000010 ++#define PCAP_BIT_BUSCTRL_USB_PS 0x50000020 ++#define PCAP_BIT_BUSCTRL_VUSB_MSTR_EN 0x50000040 ++#define PCAP_BIT_BUSCTRL_VBUS_PD_ENB 0x50000080 ++#define PCAP_BIT_BUSCTRL_CURRLIM 0x50000100 ++#define PCAP_BIT_BUSCTRL_RS232ENB 0x50000200 ++#define PCAP_BIT_BUSCTRL_RS232_DIR 0x50000400 ++#define PCAP_BIT_BUSCTRL_SE0_CONN 0x50000800 ++#define PCAP_BIT_BUSCTRL_USB_PDM 0x50001000 ++#define PCAP_BIT_BUSCTRL_BUS_PRI_ADJ 0x51000000 ++ ++#define PCAP_BIT_PERIPH_BL_CTRL0 0x54000001 ++#define PCAP_BIT_PERIPH_BL_CTRL1 0x54000002 ++#define PCAP_BIT_PERIPH_BL_CTRL2 0x54000004 ++#define PCAP_BIT_PERIPH_BL_CTRL3 0x54000008 ++#define PCAP_BIT_PERIPH_BL_CTRL4 0x54000010 ++#define PCAP_BIT_PERIPH_LEDR_EN 0x54000020 ++#define PCAP_BIT_PERIPH_LEDG_EN 0x54000040 ++#define PCAP_BIT_PERIPH_LEDR_CTRL0 0x54000080 ++#define PCAP_BIT_PERIPH_LEDR_CTRL1 0x54000100 ++#define PCAP_BIT_PERIPH_LEDR_CTRL2 0x54000200 ++#define PCAP_BIT_PERIPH_LEDR_CTRL3 0x54000400 ++#define PCAP_BIT_PERIPH_LEDG_CTRL0 0x54000800 ++#define PCAP_BIT_PERIPH_LEDG_CTRL1 0x54001000 ++#define PCAP_BIT_PERIPH_LEDG_CTRL2 0x54002000 ++#define PCAP_BIT_PERIPH_LEDG_CTRL3 0x54004000 ++#define PCAP_BIT_PERIPH_LEDR_I0 0x54008000 ++#define PCAP_BIT_PERIPH_LEDR_I1 0x54010000 ++#define PCAP_BIT_PERIPH_LEDG_I0 0x54020000 ++#define PCAP_BIT_PERIPH_LEDG_I1 0x54040000 ++#define PCAP_BIT_PERIPH_SKIP 0x54080000 ++#define PCAP_BIT_PERIPH_BL2_CTRL0 0x54100000 ++#define PCAP_BIT_PERIPH_BL2_CTRL1 0x54200000 ++#define PCAP_BIT_PERIPH_BL2_CTRL2 0x54400000 ++#define PCAP_BIT_PERIPH_BL2_CTRL3 0x54800000 ++#define PCAP_BIT_PERIPH_BL2_CTRL4 0x55000000 ++ ++#define PCAP_BIT_LOWPWR_VAUX2_STBY 0x60000001 ++#define PCAP_BIT_LOWPWR_VAUX2_LOWPWR 0x60000002 ++#define PCAP_BIT_LOWPWR_VAUX3_STBY 0x60000004 ++#define PCAP_BIT_LOWPWR_VAUX3_LOWPWR 0x60000008 ++#define PCAP_BIT_LOWPWR_VAUX4_STBY 0x60000010 ++#define PCAP_BIT_LOWPWR_VAUX4_LOWPWR 0x60000020 ++#define PCAP_BIT_LOWPWR_VSIM_LOWPWR 0x60000040 ++#define PCAP_BIT_LOWPWR_VSIM2_LOWPWR 0x60000080 ++#define PCAP_BIT_LOWPWR_SW1_MODE00 0x60000100 ++#define PCAP_BIT_LOWPWR_SW1_MODE01 0x60000200 ++#define PCAP_BIT_LOWPWR_SW1_MODE10 0x60000400 ++#define PCAP_BIT_LOWPWR_SW1_MODE11 0x60000800 ++#define PCAP_BIT_LOWPWR_SW10_DVS 0x60001000 ++#define PCAP_BIT_LOWPWR_SW11_DVS 0x60002000 ++#define PCAP_BIT_LOWPWR_SW12_DVS 0x60004000 ++#define PCAP_BIT_LOWPWR_SW13_DVS 0x60008000 ++#define PCAP_BIT_LOWPWR_SW2_MODE00 0x60010000 ++#define PCAP_BIT_LOWPWR_SW2_MODE01 0x60020000 ++#define PCAP_BIT_LOWPWR_SW2_MODE10 0x60040000 ++#define PCAP_BIT_LOWPWR_SW2_MODE11 0x60080000 ++#define PCAP_BIT_LOWPWR_SW20_DVS 0x60100000 ++#define PCAP_BIT_LOWPWR_SW21_DVS 0x60200000 ++#define PCAP_BIT_LOWPWR_SW22_DVS 0x60400000 ++#define PCAP_BIT_LOWPWR_SW23_DVS 0x60800000 ++#define PCAP_BIT_LOWPWR_VC_STBY 0x61000000 ++ ++extern int ezx_pcap_write(u_int8_t, u_int32_t); ++extern int ezx_pcap_read(u_int8_t, u_int32_t *); ++extern int ezx_pcap_bit_set(u_int32_t, u_int8_t); ++extern int ezx_pcap_bit_get(u_int32_t); ++extern int ezx_pcap_read_bit(u_int32_t); ++extern void ezx_pcap_vibrator_level(u_int32_t); ++#endif +Index: linux-2.6.23/include/asm-arm/arch-pxa/irqs.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/irqs.h 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/include/asm-arm/arch-pxa/irqs.h 2007-10-23 15:18:28.000000000 +0200 +@@ -79,7 +79,7 @@ + * within sensible limits. + */ + #define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM) +-#define IRQ_BOARD_END (IRQ_BOARD_START + 16) ++#define IRQ_BOARD_END (IRQ_BOARD_START + 22) + + #define IRQ_SA1111_START (IRQ_BOARD_END) + #define IRQ_GPAIN0 (IRQ_BOARD_END + 0) +@@ -170,7 +170,8 @@ + #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) + #elif defined(CONFIG_ARCH_LUBBOCK) || \ + defined(CONFIG_MACH_LOGICPD_PXA270) || \ +- defined(CONFIG_MACH_MAINSTONE) ++ defined(CONFIG_MACH_MAINSTONE) || \ ++ defined(CONFIG_PXA_EZX) + #define NR_IRQS (IRQ_BOARD_END) + #else + #define NR_IRQS (IRQ_BOARD_START) +@@ -216,3 +217,28 @@ + #define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1) + #define IRQ_LOCOMO_LT_BASE (IRQ_BOARD_START + 2) + #define IRQ_LOCOMO_SPI_BASE (IRQ_BOARD_START + 3) ++ ++/* EZX Interrupts (CONFIG_EZX) */ ++#define EZX_IRQ(x) (IRQ_BOARD_START + (x)) ++#define EZX_IRQ_USB4V EZX_IRQ(0) /* EMU */ ++#define EZX_IRQ_USB1V EZX_IRQ(1) /* EMU */ ++#define EZX_IRQ_HEADJACK EZX_IRQ(2) /* Audio connector */ ++#define EZX_IRQ_MIC EZX_IRQ(3) /* Audio connector */ ++#define EZX_IRQ_ADCDONE EZX_IRQ(4) ++#define EZX_IRQ_TS EZX_IRQ(5) /* TS touch */ ++#define EZX_IRQ_ADCDONE2 EZX_IRQ(6) /* TS x/y ADC ready */ ++#define EZX_IRQ_WH EZX_IRQ(7) ++#define EZX_IRQ_WL EZX_IRQ(8) ++#define EZX_IRQ_ONOFF EZX_IRQ(9) ++#define EZX_IRQ_ONOFF2 EZX_IRQ(10) ++#define EZX_IRQ_MOBPORT EZX_IRQ(11) ++#define EZX_IRQ_TODA EZX_IRQ(12) ++#define EZX_IRQ_1HZ EZX_IRQ(13) ++#define EZX_IRQ_MNEXB EZX_IRQ(14) ++#define EZX_IRQ_ST EZX_IRQ(15) ++#define EZX_IRQ_PC EZX_IRQ(16) ++#define EZX_IRQ_SYSRST EZX_IRQ(17) ++#define EZX_IRQ_SOFTRESET EZX_IRQ(18) ++#define EZX_IRQ_EOL EZX_IRQ(19) ++#define EZX_IRQ_CLK EZX_IRQ(20) ++#define EZX_IRQ_WARM EZX_IRQ(21) +Index: linux-2.6.23/arch/arm/mach-pxa/Kconfig +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Kconfig 2007-10-23 15:18:28.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Kconfig 2007-10-23 15:38:53.000000000 +0200 +@@ -109,6 +109,9 @@ + config EZX_BP + bool "BP Control code for EZX Platform" + ++config EZX_PCAP ++ bool "PCAP Support" ++ + endif + + endmenu +Index: linux-2.6.23/arch/arm/mach-pxa/Makefile +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/Makefile 2007-10-23 15:18:28.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/Makefile 2007-10-23 15:38:53.000000000 +0200 +@@ -26,6 +26,7 @@ + obj-$(CONFIG_PXA_EZX_A1200) += ezx-a1200.o + obj-$(CONFIG_PXA_EZX_E6) += ezx-e6.o + obj-$(CONFIG_EZX_BP) += ezx-bp.o ++obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o + + # Support for blinky lights + led-y := leds.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-pm.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-pm.patch new file mode 100644 index 0000000000..aa2d83b24e --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-pm.patch @@ -0,0 +1,108 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/pxa27x.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/pxa27x.c 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/pxa27x.c 2007-10-23 12:25:34.000000000 +0200 +@@ -25,6 +25,10 @@ + #include <asm/arch/pm.h> + #include <asm/arch/dma.h> + ++#ifdef CONFIG_PXA_EZX ++#include <asm/arch/ezx.h> ++#endif ++ + #include "generic.h" + #include "devices.h" + +@@ -192,7 +196,12 @@ + void pxa27x_cpu_pm_restore(unsigned long *sleep_save) + { + /* ensure not to come back here if it wasn't intended */ ++#ifdef CONFIG_PXA_EZX ++ *(unsigned long *)(phys_to_virt(RESUME_ADDR)) = 0; ++ *(unsigned long *)(phys_to_virt(FLAG_ADDR)) = OFF_FLAG; ++#else + PSPR = 0; ++#endif + + /* restore registers */ + RESTORE_GPLEVEL(0); RESTORE_GPLEVEL(1); +@@ -242,7 +251,13 @@ + break; + case PM_SUSPEND_MEM: + /* set resume return address */ ++#ifdef CONFIG_PXA_EZX ++ /* set EZX flags for blob - WM */ ++ *(unsigned long *)(phys_to_virt(RESUME_ADDR)) = virt_to_phys(pxa_cpu_resume); ++ *(unsigned long *)(phys_to_virt(FLAG_ADDR)) = SLEEP_FLAG; ++#else + PSPR = virt_to_phys(pxa_cpu_resume); ++#endif + pxa27x_cpu_suspend(PWRMODE_SLEEP); + break; + } +Index: linux-2.6.23/arch/arm/mach-pxa/ezx.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/ezx.c 2007-10-23 12:23:34.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/ezx.c 2007-10-23 12:27:30.000000000 +0200 +@@ -19,6 +19,7 @@ + #include <asm/arch/pxa-regs.h> + #include <asm/arch/ohci.h> + #include <asm/arch/ezx.h> ++#include <asm/arch/system.h> + + #include "generic.h" + +@@ -122,8 +123,53 @@ + &ezxbp_device, + }; + ++/* PM */ ++extern int bp_handshake_passed(void); ++ ++static void ezx_reboot_poweroff(char mode) ++{ ++ *(unsigned long *)(phys_to_virt(BPSIG_ADDR)) = NO_FLAG; ++ cpu_proc_fin(); ++ ++#ifdef CONFIG_EZX_BP ++ if (pxa_gpio_get_value(GPIO_BB_WDI) == 0) { ++ *(unsigned long *)(phys_to_virt(BPSIG_ADDR)) = WDI_FLAG; ++ ++ /* reset BP */ ++ pxa_gpio_set_value(GPIO_BB_RESET, 0); ++ mdelay(1); ++ pxa_gpio_set_value(GPIO_BB_RESET, 1); ++ ++ if (mode == 'z') { ++ arch_reset('h'); ++ while(1); ++ } ++ } ++#endif ++ if (mode == 'z') ++ /* Panic! Ask PCAP to turn both processors off */ ++ pxa_gpio_set_value(GPIO_WDI_AP, 0); ++ else ++ arm_machine_restart(mode); ++ ++ while(1); ++} ++ ++static inline void ezx_poweroff(void) ++{ ++ ezx_reboot_poweroff('z'); ++} ++ ++static inline void ezx_restart(char mode) ++{ ++ ezx_reboot_poweroff(mode); ++} ++ + static int __init ezx_init(void) + { ++ pm_power_off = ezx_poweroff; ++ arm_pm_restart = ezx_restart; ++ + CKEN = (1 << CKEN_OSTIMER) | (1 << CKEN_MEMC); + + pxa_gpio_mode(GPIO_ICL_FFRXD_MD); diff --git a/packages/linux/linux-ezx-2.6.23/patches/ezx-serial-bug-workaround.patch b/packages/linux/linux-ezx-2.6.23/patches/ezx-serial-bug-workaround.patch new file mode 100644 index 0000000000..9f30cc35fe --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/ezx-serial-bug-workaround.patch @@ -0,0 +1,45 @@ +Work around some errata in the pxa serial code (copied from motorolas 2.4.x tree) + +Index: linux-2.6.20.7/drivers/serial/pxa.c +=================================================================== +--- linux-2.6.20.7.orig/drivers/serial/pxa.c 2007-04-21 13:57:46.000000000 -0300 ++++ linux-2.6.20.7/drivers/serial/pxa.c 2007-04-21 14:05:03.000000000 -0300 +@@ -29,6 +29,10 @@ + #define SUPPORT_SYSRQ + #endif + ++#define pxa_buggy_port(x) ({ \ ++ int cpu_ver; asm("mrc%? p15, 0, %0, c0, c0" : "=r" (cpu_ver)); \ ++ ((x) == PORT_PXA && (cpu_ver & ~1) == 0x69052100); }) ++ + #include <linux/module.h> + #include <linux/ioport.h> + #include <linux/init.h> +@@ -195,7 +199,7 @@ + if (uart_circ_empty(xmit)) + serial_pxa_stop_tx(&up->port); + } +- ++static inline irqreturn_t serial_pxa_irq(int, void *); + static void serial_pxa_start_tx(struct uart_port *port) + { + struct uart_pxa_port *up = (struct uart_pxa_port *)port; +@@ -203,6 +207,8 @@ + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); ++ if (pxa_buggy_port(up->port.type)) ++ serial_pxa_irq(up->port.irq, NULL); + } + } + +@@ -298,6 +304,9 @@ + + mcr |= up->mcr; + ++ if (pxa_buggy_port(up->port.type) && up->port.irq != 0) ++ mcr ^= UART_MCR_OUT2; ++ + serial_out(up, UART_MCR, mcr); + } + diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-fix-init-errorpath.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-fix-init-errorpath.patch new file mode 100644 index 0000000000..716ef86fd1 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-fix-init-errorpath.patch @@ -0,0 +1,20 @@ +Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c 2007-01-17 00:10:32.000000000 +0100 ++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 00:42:23.000000000 +0100 +@@ -811,7 +811,6 @@ + /*init the related mux interface*/ + if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) { + err("usb_ipc_init: Out of memory."); +- usb_deregister(&usb_ipc_driver); + return -ENOMEM; + } + bvd_dbg("usb_ipc_init: Address of bvd_ipc:%p", bvd_ipc); +@@ -819,7 +818,6 @@ + if (!(bvd_ipc->xmit.buf = kmalloc(IPC_USB_XMIT_SIZE, GFP_KERNEL))) { + err("usb_ipc_init: Not enough memory for the input buffer."); + kfree(bvd_ipc); +- usb_deregister(&usb_ipc_driver); + return -ENOMEM; + } + bvd_dbg("usb_ipc_init: bvd_ipc->xmit.buf address:%p", diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-fix-makefile.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-fix-makefile.patch new file mode 100644 index 0000000000..9e5ae18263 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-fix-makefile.patch @@ -0,0 +1,14 @@ +Index: linux-2.6.23/drivers/char/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/char/Makefile 2007-10-22 22:26:50.000000000 +0200 ++++ linux-2.6.23/drivers/char/Makefile 2007-10-22 22:26:59.000000000 +0200 +@@ -111,7 +111,8 @@ + obj-$(CONFIG_JS_RTC) += js-rtc.o + js-rtc-y = rtc.o + +-obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o ts0710_mux_usb.o ++obj-$(CONFIG_TS0710_MUX_USB) += ts0710_mux_usb.o ++obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o + + + # Files generated that shall be removed upon make clean diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-fix-tty-driver.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-fix-tty-driver.patch new file mode 100644 index 0000000000..2e1aabd952 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-fix-tty-driver.patch @@ -0,0 +1,125 @@ +Index: linux-2.6.20.7/drivers/char/ts0710_mux.c +=================================================================== +--- linux-2.6.20.7.orig/drivers/char/ts0710_mux.c 2007-04-22 10:51:31.000000000 +0200 ++++ linux-2.6.20.7/drivers/char/ts0710_mux.c 2007-04-22 10:53:05.000000000 +0200 +@@ -241,7 +241,8 @@ + static volatile __u8 mux_recv_info_flags[NR_MUXS]; + static mux_recv_struct *mux_recv_queue = NULL; + +-static struct tty_driver mux_driver; ++// Local for 2.6? ++static struct tty_driver *mux_driver; + + #ifdef USB_FOR_MUX + #define COMM_FOR_MUX_DRIVER usb_for_mux_driver +@@ -3007,6 +3008,7 @@ + #else + mux_tty[line]++; + dlci = tty2dlci[line]; ++ mux_table[line] = tty; + + /* if( dlci == 1 ) { */ + /* Open server channel 0 first */ +@@ -3087,6 +3089,7 @@ + } + } + ++ + retval = 0; + #endif + out: +@@ -3894,43 +3897,50 @@ + INIT_WORK(&receive_tqueue, receive_worker, NULL); + INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL); + +- memset(&mux_driver, 0, sizeof(struct tty_driver)); +- memset(&mux_tty, 0, sizeof(mux_tty)); +- mux_driver.magic = TTY_DRIVER_MAGIC; +- mux_driver.driver_name = "ts0710mux"; +- mux_driver.name = "ts0710mux"; +- mux_driver.major = TS0710MUX_MAJOR; +- mux_driver.minor_start = TS0710MUX_MINOR_START; +- mux_driver.num = NR_MUXS; +- mux_driver.type = TTY_DRIVER_TYPE_SERIAL; +- mux_driver.subtype = SERIAL_TYPE_NORMAL; +- mux_driver.init_termios = tty_std_termios; +- mux_driver.init_termios.c_iflag = 0; +- mux_driver.init_termios.c_oflag = 0; +- mux_driver.init_termios.c_cflag = B38400 | CS8 | CREAD; +- mux_driver.init_termios.c_lflag = 0; +- mux_driver.flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; +- +- mux_driver.ttys = mux_table; +- mux_driver.termios = mux_termios; +- mux_driver.termios_locked = mux_termios_locked; ++ mux_driver = alloc_tty_driver(NR_MUXS); ++ if (!mux_driver) ++ return -ENOMEM; ++ ++ mux_driver->owner = THIS_MODULE; ++ mux_driver->driver_name = "ts0710mux"; ++ mux_driver->name = "mux"; ++ mux_driver->devfs_name = "mux"; ++ mux_driver->major = TS0710MUX_MAJOR; ++ mux_driver->minor_start = TS0710MUX_MINOR_START; ++ mux_driver->type = TTY_DRIVER_TYPE_SERIAL; ++ mux_driver->subtype = SERIAL_TYPE_NORMAL; ++ mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; ++ ++ mux_driver->init_termios = tty_std_termios; ++ mux_driver->init_termios.c_iflag = 0; ++ mux_driver->init_termios.c_oflag = 0; ++ mux_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; ++ mux_driver->init_termios.c_lflag = 0; ++ ++// mux_driver.ttys = mux_table; ++ mux_driver->termios = mux_termios; ++ mux_driver->termios_locked = mux_termios_locked; + // mux_driver.driver_state = mux_state; +- mux_driver.other = NULL; ++ mux_driver->other = NULL; + +- mux_driver.open = mux_open; +- mux_driver.close = mux_close; +- mux_driver.write = mux_write; +- mux_driver.write_room = mux_write_room; +- mux_driver.flush_buffer = mux_flush_buffer; +- mux_driver.chars_in_buffer = mux_chars_in_buffer; +- mux_driver.throttle = mux_throttle; +- mux_driver.unthrottle = mux_unthrottle; +- mux_driver.ioctl = mux_ioctl; +- mux_driver.owner = THIS_MODULE; ++ mux_driver->open = mux_open; ++ mux_driver->close = mux_close; ++ mux_driver->write = mux_write; ++ mux_driver->write_room = mux_write_room; ++ mux_driver->flush_buffer = mux_flush_buffer; ++ mux_driver->chars_in_buffer = mux_chars_in_buffer; ++ mux_driver->throttle = mux_throttle; ++ mux_driver->unthrottle = mux_unthrottle; ++ mux_driver->ioctl = mux_ioctl; + +- if (tty_register_driver(&mux_driver)) ++ // FIXME: No panic() here ++ if (tty_register_driver(mux_driver)) + panic("Couldn't register mux driver"); + ++ for (j=0; j<NR_MUXS; j++) ++ tty_register_device(mux_driver, j, NULL); ++ ++ + COMM_MUX_DISPATCHER = mux_dispatcher; + COMM_MUX_SENDER = mux_sender; + +@@ -3964,7 +3974,10 @@ + mux_recv_info[j] = 0; + } + +- if (tty_unregister_driver(&mux_driver)) ++ for (j=0; j<NR_MUXS; j++) ++ tty_unregister_device(mux_driver, j); ++ ++ if (tty_unregister_driver(mux_driver)) + panic("Couldn't unregister mux driver"); + } + diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-fix.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-fix.patch new file mode 100644 index 0000000000..b820762f41 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-fix.patch @@ -0,0 +1,164 @@ +Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c 2007-04-21 18:07:45.000000000 +0200 ++++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c 2007-04-21 20:55:13.000000000 +0200 +@@ -626,7 +626,6 @@ + } + + interface = &intf->cur_altsetting->desc; +- endpoint = &intf->cur_altsetting->endpoint[0].desc; + /* Start checking for two bulk endpoints or ... FIXME: This is a future + * enhancement...*/ + bvd_dbg("usb_ipc_probe: Number of Endpoints:%d", +@@ -638,30 +637,26 @@ + + ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0; + +- bvd_dbg("usb_ipc_probe: endpoint[0] is:%x", +- (&endpoint[0])->bEndpointAddress); +- bvd_dbg("usb_ipc_probe: endpoint[1] is:%x ", +- (&endpoint[1])->bEndpointAddress); +- + while (ep_cnt < interface->bNumEndpoints) { +- +- if (!have_bulk_in_mux && IS_EP_BULK_IN(endpoint[ep_cnt])) { +- bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is:%x ", +- (&endpoint[ep_cnt])->bEndpointAddress); +- have_bulk_in_mux = +- (&endpoint[ep_cnt])->bEndpointAddress; +- readsize = (&endpoint[ep_cnt])->wMaxPacketSize; ++ endpoint = &intf->cur_altsetting->endpoint[ep_cnt].desc; ++ bvd_dbg("usb_ipc_probe: endpoint[%i] is: %x", ep_cnt, ++ endpoint->bEndpointAddress); ++ ++ if (!have_bulk_in_mux && IS_EP_BULK_IN(*endpoint)) { ++ bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is: %x ", ++ endpoint->bEndpointAddress); ++ have_bulk_in_mux = endpoint->bEndpointAddress; ++ readsize = endpoint->wMaxPacketSize; + bvd_dbg("usb_ipc_probe: readsize=%d", readsize); + ep_cnt++; + continue; + } + +- if (!have_bulk_out_mux && IS_EP_BULK_OUT(endpoint[ep_cnt])) { +- bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is:%x ", +- (&endpoint[ep_cnt])->bEndpointAddress); +- have_bulk_out_mux = +- (&endpoint[ep_cnt])->bEndpointAddress; +- writesize = (&endpoint[ep_cnt])->wMaxPacketSize; ++ if (!have_bulk_out_mux && IS_EP_BULK_OUT(*endpoint)) { ++ bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is: %x ", ++ endpoint->bEndpointAddress); ++ have_bulk_out_mux = endpoint->bEndpointAddress; ++ writesize = endpoint->wMaxPacketSize; + bvd_dbg("usb_ipc_probe: writesize=%d", writesize); + ep_cnt++; + continue; +@@ -718,21 +713,27 @@ + bvd_ipc->bh_bp.func = usbipc_bh_bp_func; + bvd_ipc->bh_bp.data = (unsigned long) bvd_ipc; + ++ bvd_dbg("after assignements"); + /*Build a write urb*/ ++ usb_init_urb(&bvd_ipc->writeurb_mux); + usb_fill_bulk_urb(&bvd_ipc->writeurb_mux, usbdev, + usb_sndbulkpipe(bvd_ipc->ipc_dev, + bvd_ipc->bulk_out_ep_mux), + bvd_ipc->obuf, writesize, usb_ipc_write_bulk, + bvd_ipc); + //bvd_ipc->writeurb_mux.transfer_flags |= USB_ASYNC_UNLINK; ++ bvd_dbg("after write urb"); + + /*Build a read urb and send a IN token first time*/ ++ usb_init_urb(&bvd_ipc->readurb_mux); + usb_fill_bulk_urb(&bvd_ipc->readurb_mux, usbdev, + usb_rcvbulkpipe(usbdev, bvd_ipc->bulk_in_ep_mux), + bvd_ipc->ibuf, readsize, usb_ipc_read_bulk, bvd_ipc); + //bvd_ipc->readurb_mux.transfer_flags |= USB_ASYNC_UNLINK; ++ bvd_dbg("after read urb"); + +- usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc); ++ //usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc); ++ bvd_dbg("after claim interface"); + //usb_driver_claim_interface(&usb_ipc_driver, &ipccfg->interface[1], bvd_ipc); + + // a2590c: dsplog is not supported by this driver +@@ -740,6 +741,8 @@ + // &ipccfg->interface[2], bvd_ipc); + /*send a IN token first time*/ + bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev; ++ bvd_dbg("after assignement"); ++ + if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) + printk("usb_ipc_prob: usb_submit_urb(read mux bulk) failed!\n"); + +@@ -750,7 +753,7 @@ + tasklet_schedule(&bvd_ipc->bh); + } + +- printk("usb_ipc_probe: completed probe!"); ++ printk("usb_ipc_probe: completed probe!\n"); + usb_set_intfdata(intf, &bvd_ipc); + return 0; + } +@@ -760,21 +763,23 @@ + //struct usb_device *usbdev = interface_to_usbdev(intf); + struct ipc_usb_data *bvd_ipc_disconnect = usb_get_intfdata(intf); + +- printk("usb_ipc_disconnect:*** \n"); + ++ printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect); ++ ++ //FIXME: Memory leak? + if ((UHCRHPS3 & 0x4) == 0) +- usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux); ++ // usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux); + +- usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux); ++ //usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux); + + bvd_ipc_disconnect->ipc_flag = IPC_USB_PROBE_NOT_READY; + kfree(bvd_ipc_disconnect->ibuf); + kfree(bvd_ipc_disconnect->obuf); + +- usb_driver_release_interface(&usb_ipc_driver, +- bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]); +- usb_driver_release_interface(&usb_ipc_driver, +- bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]); ++ //usb_driver_release_interface(&usb_ipc_driver, ++ // bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]); ++ //usb_driver_release_interface(&usb_ipc_driver, ++ // bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]); + + //a2590c: dsplog interface is not supported by this driver + //usb_driver_release_interface(&usb_ipc_driver, &bvd_ipc_disconnect->ipc_dev->actconfig->interface[2]); +@@ -803,13 +808,6 @@ + int result; + + bvd_dbg("init usb_ipc"); +- /* register driver at the USB subsystem */ +- result = usb_register(&usb_ipc_driver); +- if (result < 0) { +- err ("usb ipc driver could not be registered"); +- return result; +- } +- + /*init the related mux interface*/ + if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) { + err("usb_ipc_init: Out of memory."); +@@ -836,6 +834,14 @@ + usb_for_mux_driver = &ipcusb_tty_driver; + usb_for_mux_tty = &ipcusb_tty; + ++ /* register driver at the USB subsystem */ ++ // this was called before bvd_ipc was allocated ++ result = usb_register(&usb_ipc_driver); ++ if (result < 0) { ++ err ("usb ipc driver could not be registered"); ++ return result; ++ } ++ + /* init timers for ipcusb read process and usb suspend */ + init_timer(&ipcusb_timer); + ipcusb_timer.function = ipcusb_timeout; diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch new file mode 100644 index 0000000000..a3a6a8249a --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-ifdef-ezx-features.patch @@ -0,0 +1,99 @@ +Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c 2007-09-28 23:37:33.000000000 +0200 ++++ linux-2.6.21/drivers/char/ts0710_mux_usb.c 2007-09-28 23:37:45.000000000 +0200 +@@ -35,10 +35,14 @@ + #include <linux/list.h> + #include <linux/errno.h> + #include <asm/uaccess.h> ++ ++#ifdef CONFIG_PXA_EZX + #include <asm/hardware.h> + #include <asm/arch/hardware.h> + #include <asm/arch-pxa/pxa-regs.h> + #include <asm/arch-pxa/ezx.h> ++#endif ++ + #include <linux/slab.h> + #include <linux/miscdevice.h> + #include <linux/init.h> +@@ -341,8 +345,10 @@ + + static void wakeup_timeout(unsigned long data) + { ++#ifdef CONFIG_PXA_EZX + GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW); + bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!"); ++#endif + } + + static void suspend_timeout(unsigned long data) +@@ -353,10 +359,12 @@ + bvd_dbg("suspend_timeout: add the suspend timer again"); + } else { + unlink_urbs(&bvd_ipc->readurb_mux); ++#ifdef CONFIG_PXA_EZX + UHCRHPS3 = 0x4; + mdelay(40); + bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x", + UHCRHPS3); ++#endif + } + } + +@@ -404,6 +412,7 @@ + bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num; + bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! "); + ++#ifdef CONFIG_PXA_EZX + if ((UHCRHPS3 & 0x4) == 0x4) { + static int ret; + int time = 0; +@@ -442,6 +451,7 @@ + "failed! status=%d\n", ret); + bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!"); + } ++#endif + + sumbit_times++; + bvd_ipc->write_finished_flag = 0; +@@ -464,12 +474,16 @@ + + static void usbipc_bh_bp_func(unsigned long param) + { ++#ifdef CONFIG_PXA_EZX + if ((UHCRHPS3 & 0x4) == 0x4) { + UHCRHPS3 = 0x8; ++#endif + mdelay(40); ++#ifdef CONFIG_PXA_EZX + bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! " + "UHCRHPS3=0x%x", UHCRHPS3); + } ++#endif + if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) { + //get_halted_bit(); + +@@ -735,7 +749,9 @@ + printk("usb_ipc_disconnect. bvd_ipc_disconnect address: %p\n", bvd_ipc_disconnect); + + //FIXME: Memory leak? ++#ifdef CONFIG_PXA_EZX + if ((UHCRHPS3 & 0x4) == 0) ++#endif + // usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux); + + //usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux); +Index: linux-2.6.21/drivers/char/Kconfig +=================================================================== +--- linux-2.6.21.orig/drivers/char/Kconfig 2007-09-29 10:52:18.000000000 +0200 ++++ linux-2.6.21/drivers/char/Kconfig 2007-09-29 10:52:30.000000000 +0200 +@@ -1073,7 +1073,7 @@ + + config TS0710_MUX + tristate "GSM TS 07.10 Multiplex driver" +- depends on EZX_BP ++ depends on EZX_BP || X86 + help + This implements the GSM 07.10 multiplex. + diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-linux-2.6.21-fix.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-linux-2.6.21-fix.patch new file mode 100644 index 0000000000..8d5299e3bd --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-linux-2.6.21-fix.patch @@ -0,0 +1,297 @@ +Index: linux-2.6.21/drivers/char/ts0710.h +=================================================================== +--- linux-2.6.21.orig/drivers/char/ts0710.h 2007-04-27 20:35:44.000000000 -0300 ++++ linux-2.6.21/drivers/char/ts0710.h 2007-04-27 20:36:03.000000000 -0300 +@@ -45,7 +45,6 @@ + * 11/18/2002 Modified + */ + +-#include <linux/config.h> + #include <linux/module.h> + + #include <linux/errno.h> +@@ -58,7 +57,6 @@ + #include <linux/major.h> + #include <linux/mm.h> + #include <linux/init.h> +-#include <linux/devfs_fs_kernel.h> + + #include <asm/uaccess.h> + #include <asm/system.h> +Index: linux-2.6.21/drivers/char/ts0710_mux.c +=================================================================== +--- linux-2.6.21.orig/drivers/char/ts0710_mux.c 2007-04-27 20:35:44.000000000 -0300 ++++ linux-2.6.21/drivers/char/ts0710_mux.c 2007-04-27 20:36:03.000000000 -0300 +@@ -46,7 +46,6 @@ + * 11/18/2002 Second version + * 04/21/2004 Add GPRS PROC + */ +-#include <linux/config.h> + #include <linux/module.h> + #include <linux/types.h> + +@@ -70,15 +69,12 @@ + #include <linux/mm.h> + #include <linux/slab.h> + #include <linux/init.h> +-#include <linux/devfs_fs_kernel.h> +-//#include <syslog.h> + + #include <asm/uaccess.h> + #include <asm/system.h> + #include <asm/bitops.h> + + #ifdef USB_FOR_MUX +-//#include <linux/usb.h> + #include "ts0710_mux_usb.h" + #endif + +@@ -268,8 +264,8 @@ + static struct work_struct post_recv_tqueue; + + static struct tty_struct *mux_table[NR_MUXS]; +-static struct termios *mux_termios[NR_MUXS]; +-static struct termios *mux_termios_locked[NR_MUXS]; ++static struct ktermios *mux_termios[NR_MUXS]; ++static struct ktermios *mux_termios_locked[NR_MUXS]; + static volatile short int mux_tty[NR_MUXS]; + + #ifdef min +@@ -1894,11 +1890,7 @@ + if (test_bit(TTY_THROTTLED, &tty->flags)) { + queue_data = 1; + } else { +- if (test_bit +- (TTY_DONT_FLIP, &tty->flags)) { +- queue_data = 1; +- post_recv = 1; +- } else if (recv_info->total) { ++ if (recv_info->total) { + queue_data = 1; + post_recv = 1; + } else if (recv_room < uih_len) { +@@ -3149,10 +3141,10 @@ + + /*For BP UART problem End*/ + +-static void receive_worker(void *private_) ++static void receive_worker(struct work_struct *work) + { + struct tty_struct *tty = COMM_FOR_MUX_TTY; +- int i, count, tbuf_free, tbuf_read; ++ int count, tbuf_free, tbuf_read; + static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE]; + static unsigned char *tbuf_ptr = &tbuf[0]; + static unsigned char *start_flag = 0; +@@ -3168,7 +3160,7 @@ + __u32 uih_len; + /*For BP UART problem End */ + +- UNUSED_PARAM(private_); ++ UNUSED_PARAM(work); + + if (!tty) + return; +@@ -3440,7 +3432,7 @@ + clear_bit(RECV_RUNNING, &mux_recv_flags); + } + +-static void post_recv_worker(void *private_) ++static void post_recv_worker(struct work_struct *work) + { + ts0710_con *ts0710 = &ts0710_connection; + int tty_idx; +@@ -3453,7 +3445,7 @@ + mux_recv_packet *recv_packet, *recv_packet2; + __u8 j; + +- UNUSED_PARAM(private_); ++ UNUSED_PARAM(work); + + if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) { + schedule_work(&post_recv_tqueue); +@@ -3499,10 +3491,6 @@ + if (test_bit(TTY_THROTTLED, &tty->flags)) { + add_post_recv_queue(&post_recv_q, recv_info); + continue; +- } else if (test_bit(TTY_DONT_FLIP, &tty->flags)) { +- post_recv = 1; +- add_post_recv_queue(&post_recv_q, recv_info); +- continue; + } + + flow_control = 0; +@@ -3635,7 +3623,7 @@ + } + } + +-static void send_worker(void *private_) ++static void send_worker(struct work_struct *work) + { + ts0710_con *ts0710 = &ts0710_connection; + __u8 j; +@@ -3644,7 +3632,7 @@ + struct tty_struct *tty; + __u8 dlci; + +- UNUSED_PARAM(private_); ++ UNUSED_PARAM(work); + + TS0710_DEBUG("Enter into send_worker"); + +@@ -3819,7 +3807,8 @@ + gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes = + get_count(TS0710MUX_GPRS2_SEND_COUNT_IDX); + +- copy_to_user(buf, gprsData, bufLen); ++ if(copy_to_user(buf, gprsData, bufLen)) ++ return -EFAULT; + + return bufLen; + } +@@ -3836,7 +3825,8 @@ + + memset(gprsData, 0, bufLen); + +- copy_from_user(gprsData, buf, bufLen); ++ if(copy_from_user(gprsData, buf, bufLen)) ++ return -EFAULT; + + set_count(TS0710MUX_GPRS1_RECV_COUNT_IDX, gprsData[0].recvBytes); + set_count(TS0710MUX_GPRS1_SEND_COUNT_IDX, gprsData[0].sentBytes); +@@ -3893,9 +3883,9 @@ + } + post_recv_count_flag = 0; + +- INIT_WORK(&send_tqueue, send_worker, NULL); +- INIT_WORK(&receive_tqueue, receive_worker, NULL); +- INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL); ++ INIT_WORK(&send_tqueue, send_worker); ++ INIT_WORK(&receive_tqueue, receive_worker); ++ INIT_WORK(&post_recv_tqueue, post_recv_worker); + + mux_driver = alloc_tty_driver(NR_MUXS); + if (!mux_driver) +@@ -3904,12 +3894,11 @@ + mux_driver->owner = THIS_MODULE; + mux_driver->driver_name = "ts0710mux"; + mux_driver->name = "mux"; +- mux_driver->devfs_name = "mux"; + mux_driver->major = TS0710MUX_MAJOR; + mux_driver->minor_start = TS0710MUX_MINOR_START; + mux_driver->type = TTY_DRIVER_TYPE_SERIAL; + mux_driver->subtype = SERIAL_TYPE_NORMAL; +- mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; ++ mux_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; + + mux_driver->init_termios = tty_std_termios; + mux_driver->init_termios.c_iflag = 0; +@@ -3917,10 +3906,10 @@ + mux_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; + mux_driver->init_termios.c_lflag = 0; + +-// mux_driver.ttys = mux_table; ++ //mux_driver.ttys = mux_table; + mux_driver->termios = mux_termios; + mux_driver->termios_locked = mux_termios_locked; +-// mux_driver.driver_state = mux_state; ++ //mux_driver.driver_state = mux_state; + mux_driver->other = NULL; + + mux_driver->open = mux_open; +Index: linux-2.6.21/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.21.orig/drivers/char/ts0710_mux_usb.c 2007-04-27 20:35:44.000000000 -0300 ++++ linux-2.6.21/drivers/char/ts0710_mux_usb.c 2007-04-27 22:34:31.000000000 -0300 +@@ -188,7 +188,8 @@ + buf_list_t *inbuf; + int count = urb->actual_length; + +- inbuf = kmalloc(sizeof(buf_list_t), GFP_KERNEL); ++ // we are called from interrupt context. ++ inbuf = kmalloc(sizeof(buf_list_t), GFP_ATOMIC); + if (!inbuf) { + printk("append_to_inbuf_list: (%d) out of memory!\n", + sizeof(buf_list_t)); +@@ -196,7 +197,7 @@ + } + + inbuf->size = count; +- inbuf->body = kmalloc(sizeof(char)*count, GFP_KERNEL); ++ inbuf->body = kmalloc(sizeof(char)*count, GFP_ATOMIC); + if (!inbuf->body) { + kfree(inbuf); + printk("append_to_inbuf_list: (%d) out of memory!\n", +@@ -222,7 +223,7 @@ + inbuf = list_entry(ptr, buf_list_t, list); + src_count = inbuf->size; + if (dst_count >= src_count) { +- memcpy(buf, inbuf->body, src_count); ++ memcpy((unsigned char *)buf, inbuf->body, src_count); + ret = src_count; + list_del(ptr); + kfree(inbuf->body); +@@ -282,9 +283,8 @@ + spin_unlock(&bvd_ipc->in_buf_lock); + } + +-static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs) ++static void usb_ipc_read_bulk(struct urb *urb) + { +- buf_list_t *inbuf; + int count = urb->actual_length; + struct tty_struct *tty = &ipcusb_tty; + +@@ -319,7 +319,7 @@ + bvd_dbg("usb_ipc_read_bulk: completed!!!"); + } + +-static void usb_ipc_write_bulk(struct urb *urb, struct pt_regs *regs) ++static void usb_ipc_write_bulk(struct urb *urb) + { + callback_times++; + bvd_ipc->write_finished_flag = 1; +@@ -437,7 +437,7 @@ + /*send IN token*/ + bvd_ipc->readurb_mux.actual_length = 0; + bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev; +- if (ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) ++ if ((ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC))) + printk("ipcusb_xmit_data: usb_submit_urb(read mux bulk)" + "failed! status=%d\n", ret); + bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!"); +@@ -447,7 +447,7 @@ + bvd_ipc->write_finished_flag = 0; + //printk("%s: clear write_finished_flag:%d\n", __FUNCTION__, bvd_ipc->write_finished_flag); + bvd_ipc->writeurb_mux.dev = bvd_ipc->ipc_dev; +- if (result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC)) ++ if ((result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC))) + warn("ipcusb_xmit_data: funky result! result=%d\n", result); + + bvd_dbg("ipcusb_xmit_data: usb_submit_urb finished! result:%d", result); +@@ -498,7 +498,7 @@ + return 0; + + if (*ipcusb_ap_to_bp != NULL) +- (*ipcusb_ap_to_bp)(buf, count); ++ (*ipcusb_ap_to_bp)((unsigned char *)buf, count); + + bvd_ipc->suspend_flag = 1; + +@@ -602,6 +602,7 @@ + } + + ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0; ++ readsize = writesize = 0; + + while (ep_cnt < interface->bNumEndpoints) { + endpoint = &intf->cur_altsetting->endpoint[ep_cnt].desc; +@@ -792,6 +793,8 @@ + bvd_ipc->ipc_dev = NULL; + bvd_ipc->xmit.head = bvd_ipc->xmit.tail = 0; + bvd_ipc->write_flag = IPC_USB_WRITE_INIT; ++ spin_lock_init(&bvd_ipc->lock); ++ spin_lock_init(&bvd_ipc->in_buf_lock); + + ipcusb_tty_driver.write = usb_ipc_write; + ipcusb_tty_driver.chars_in_buffer = usb_ipc_chars_in_buffer; diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-remove-flipbuffers.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-remove-flipbuffers.patch new file mode 100644 index 0000000000..d4781f9fc7 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-remove-flipbuffers.patch @@ -0,0 +1,269 @@ +Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c 2007-01-17 00:52:25.000000000 +0100 ++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 00:52:26.000000000 +0100 +@@ -133,6 +133,7 @@ + + struct circ_buf xmit; /* write cric bufffer */ + struct list_head in_buf_list; ++ spinlock_t in_buf_lock; + char bulk_in_ep_mux, + bulk_out_ep_mux, + bulk_in_ep_dsplog; +@@ -204,9 +205,39 @@ + return; + } + memcpy(inbuf->body, (unsigned char*)urb->transfer_buffer, count); ++ spin_lock(&bvd_ipc->in_buf_lock); + list_add_tail(&inbuf->list, &bvd_ipc->in_buf_list); ++ spin_unlock(&bvd_ipc->in_buf_lock); + } + ++int get_from_inbuf_list(const unsigned char *buf, int dst_count) ++{ ++ int ret = 0; ++ spin_lock(&bvd_ipc->in_buf_lock); ++ if (!(list_empty(&bvd_ipc->in_buf_list))) { ++ int src_count; ++ buf_list_t *inbuf; ++ struct list_head *ptr; ++ ++ ptr = bvd_ipc->in_buf_list.next; ++ inbuf = list_entry(ptr, buf_list_t, list); ++ src_count = inbuf->size; ++ if (dst_count >= src_count) { ++ memcpy(buf, inbuf->body, src_count); ++ ret = src_count; ++ list_del(ptr); ++ kfree(inbuf->body); ++ kfree(inbuf); ++ } else { ++ bvd_dbg("get_from_inbuf_list: not enough space in destination buffer"); ++ } ++ } ++ spin_unlock(&bvd_ipc->in_buf_lock); ++ ++ return ret; ++} ++EXPORT_SYMBOL(get_from_inbuf_list); ++ + static void ipcusb_timeout(unsigned long data) + { + struct tty_struct *tty = &ipcusb_tty; +@@ -214,13 +245,14 @@ + + bvd_dbg("ipcusb_timeout***"); + ++ spin_lock(&bvd_ipc->in_buf_lock); + while (!(list_empty(&bvd_ipc->in_buf_list))) { + int count; + buf_list_t *inbuf; + struct list_head *ptr = NULL; + + ptr = bvd_ipc->in_buf_list.next; +- inbuf = list_entry (ptr, buf_list_t, list); ++ inbuf = list_entry(ptr, buf_list_t, list); + count = inbuf->size; + if (tty_insert_flip_string(tty, inbuf->body, count) >= count) { + list_del(ptr); +@@ -232,10 +264,12 @@ + break; + } + } ++ spin_unlock(&bvd_ipc->in_buf_lock); + + if (usb_mux_dispatcher) + usb_mux_dispatcher(tty); /**call Liu changhui's func.**/ + ++ spin_lock(&bvd_ipc->in_buf_lock); + if (list_empty(&bvd_ipc->in_buf_list)) { + urb->actual_length = 0; + urb->dev = bvd_ipc->ipc_dev; +@@ -246,6 +280,7 @@ + ipcusb_timer.data = (unsigned long)urb; + mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000)); + } ++ spin_unlock(&bvd_ipc->in_buf_lock); + } + + static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs) +@@ -266,69 +301,11 @@ + if (count > 0 && ((*ipcusb_bp_to_ap) != NULL)) + (*ipcusb_bp_to_ap)(urb->transfer_buffer, urb->actual_length); + +- if (!(list_empty(&bvd_ipc->in_buf_list))) { +- int need_mux = 0; +- +- bvd_dbg("usb_ipc_read_bulk: some urbs in_buf_list"); +- if (count > 0) { +- bvd_ipc->suspend_flag = 1; +- append_to_inbuf_list(urb); /* append the current received urb */ +-#if 0 +- if(jiffies - last_jiff > ICL_EVENT_INTERVAL) +- { +- last_jiff = jiffies; +- queue_apm_event(KRNL_ICL, NULL); +- } +-#endif +- } +- +- while (!(list_empty(&bvd_ipc->in_buf_list))) { +- struct list_head* ptr = NULL; +- ptr = bvd_ipc->in_buf_list.next; +- inbuf = list_entry(ptr, buf_list_t, list); +- count = inbuf->size; +- need_mux = 1; +- +- tty_insert_flip_string(tty, inbuf->body, count); +- +- list_del(ptr); +- kfree(inbuf->body); +- inbuf->body = NULL; +- kfree(inbuf); +- } +- +- if (usb_mux_dispatcher && need_mux) +- usb_mux_dispatcher(tty); /* call Liu changhui's func. */ +- +- if (list_empty(&bvd_ipc->in_buf_list)) { +- urb->actual_length = 0; +- urb->dev = bvd_ipc->ipc_dev; +- if (usb_submit_urb(urb, GFP_ATOMIC)) +- bvd_dbg("usb_ipc_read_bulk: " +- "failed resubmitting read urb"); +- bvd_dbg("usb_ipc_read_bulk: resubmited read urb"); +- } else { +- ipcusb_timer.data = (unsigned long)urb; +- mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000)); +- } +- } else if (count > 0) { +- bvd_dbg("usb_ipc_read_bulk: no urbs in_buf_list"); ++ if (count > 0) { ++ bvd_dbg("usb_ipc_read_bulk: inserting buffer into in_buf_list"); + bvd_ipc->suspend_flag = 1; + +- if (tty_insert_flip_string(tty, urb->transfer_buffer, +- count) < count) { +- bvd_ipc->suspend_flag = 1; +- append_to_inbuf_list(urb); +- ipcusb_timer.data = (unsigned long)urb; +- mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000)); +-#if 0 +- if(jiffies - last_jiff > ICL_EVENT_INTERVAL) +- { +- last_jiff = jiffies; +- queue_apm_event(KRNL_ICL, NULL); +- } +-#endif +- } ++ append_to_inbuf_list(urb); + + if (usb_mux_dispatcher) + usb_mux_dispatcher(tty); /* call Liu changhui's func. */ +@@ -337,13 +314,6 @@ + urb->dev = bvd_ipc->ipc_dev; + if (usb_submit_urb(urb, GFP_ATOMIC)) + bvd_dbg("failed resubmitting read urb"); +-#if 0 +- if(jiffies - last_jiff > ICL_EVENT_INTERVAL) +- { +- last_jiff = jiffies; +- queue_apm_event(KRNL_ICL, NULL); +- } +-#endif + bvd_dbg("usb_ipc_read_bulk: resubmited read urb"); + } + +@@ -705,7 +675,8 @@ + bvd_ipc->bulk_out_ep_mux= have_bulk_out_mux; + bvd_ipc->ipc_dev = usbdev; + bvd_ipc->writesize = writesize; +- INIT_LIST_HEAD (&bvd_ipc->in_buf_list); ++ INIT_LIST_HEAD(&bvd_ipc->in_buf_list); ++ bvd_ipc->in_buf_lock = SPIN_LOCK_UNLOCKED; + + bvd_ipc->bh.func = usbipc_bh_func; + bvd_ipc->bh.data = (unsigned long) bvd_ipc; +Index: linux-2.6.16/drivers/char/ts0710_mux.c +=================================================================== +--- linux-2.6.16.orig/drivers/char/ts0710_mux.c 2007-01-17 00:52:23.000000000 +0100 ++++ linux-2.6.16/drivers/char/ts0710_mux.c 2007-01-17 00:52:26.000000000 +0100 +@@ -3149,7 +3149,7 @@ + static void receive_worker(void *private_) + { + struct tty_struct *tty = COMM_FOR_MUX_TTY; +- int i, count; ++ int i, count, tbuf_free, tbuf_read; + static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE]; + static unsigned char *tbuf_ptr = &tbuf[0]; + static unsigned char *start_flag = 0; +@@ -3167,29 +3167,39 @@ + + UNUSED_PARAM(private_); + +- if (!tty) +- return; ++ if (!tty) ++ return; ++ ++ while (1) { ++ tbuf_free = TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf); ++ TS0710_PRINTK("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free); ++ tbuf_read = get_from_inbuf_list(tbuf_ptr, tbuf_free); ++ if (tbuf_read == 0) { ++ break; ++ } else { ++ TS0710_PRINTK("Read %i bytes.\n", tbuf_read); ++ }; ++ tbuf_ptr += tbuf_read; ++ }; ++ ++ count = (tbuf_ptr - tbuf); ++ ++ // Should be impossible? ++ //if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) { ++ // TS0710_PRINTK ++ // ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n"); ++ // count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf)); ++ //} + + #ifdef USB_FOR_MUX +- TS0710_DEBUG("Receive following bytes from IPC-USB"); ++ TS0710_DEBUG("Received following bytes from IPC-USB"); + #else +- TS0710_DEBUG("Receive following bytes from UART"); ++ TS0710_DEBUG("Received following bytes from UART"); + #endif +- +- TS0710_DEBUGHEX(cp, count); +- +- if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) { +- TS0710_PRINTK +- ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n"); +- count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf)); +- } +- +- count = tty_buffer_request_room(tty, count); +- +- for (i = 0; i < count; i++) +- tty_insert_flip_char(tty, tbuf_ptr[i], TTY_NORMAL); +- +- tbuf_ptr += count; ++ TS0710_DEBUGHEX(tbuf, count); ++ ++ //gets updated above ++ //tbuf_ptr += count; + search = &tbuf[0]; + + if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) { +Index: linux-2.6.16/drivers/char/ts0710_mux_usb.h +=================================================================== +--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.h 2007-01-17 00:52:23.000000000 +0100 ++++ linux-2.6.16/drivers/char/ts0710_mux_usb.h 2007-01-17 00:52:26.000000000 +0100 +@@ -27,3 +27,6 @@ + extern struct tty_struct *usb_for_mux_tty; + extern void (*usb_mux_dispatcher)(struct tty_struct *tty); + extern void (*usb_mux_sender)(void); ++ ++extern int get_from_inbuf_list(const unsigned char *buf, int dst_count); ++ diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-remove-get_halted_bit.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-remove-get_halted_bit.patch new file mode 100644 index 0000000000..0ebe27d03b --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-remove-get_halted_bit.patch @@ -0,0 +1,22 @@ +Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c 2007-01-17 01:06:21.000000000 +0100 ++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 01:06:31.000000000 +0100 +@@ -461,7 +461,7 @@ + ipcusb_xmit_data(); + } + +-extern void get_halted_bit(void); ++//extern void get_halted_bit(void); + + static void usbipc_bh_bp_func(unsigned long param) + { +@@ -472,7 +472,7 @@ + "UHCRHPS3=0x%x", UHCRHPS3); + } + if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) { +- get_halted_bit(); ++ //get_halted_bit(); + + /*send a IN token*/ + bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev; diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux-remove-usbh_finished_resume.patch b/packages/linux/linux-ezx-2.6.23/patches/mux-remove-usbh_finished_resume.patch new file mode 100644 index 0000000000..c415ded428 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux-remove-usbh_finished_resume.patch @@ -0,0 +1,22 @@ +Index: linux-2.6.16/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.16.orig/drivers/char/ts0710_mux_usb.c 2007-01-17 01:12:23.000000000 +0100 ++++ linux-2.6.16/drivers/char/ts0710_mux_usb.c 2007-01-17 01:12:37.000000000 +0100 +@@ -97,7 +97,6 @@ + static int sumbit_times = 0; + static int callback_times = 0; + //static unsigned long last_jiff = 0; +-extern int usbh_finished_resume; + /*end global values defined*/ + + MODULE_AUTHOR(DRIVER_AUTHOR); +@@ -546,9 +545,6 @@ + void usb_send_readurb(void) + { + //printk("usb_send_readurb: begining!UHCRHPS3=0x%x, usbh_finished_resume=%d\n", UHCRHPS3, usbh_finished_resume); +- +- if (usbh_finished_resume == 0) +- return; + + tasklet_schedule(&bvd_ipc->bh_bp); + } diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux_cli.patch b/packages/linux/linux-ezx-2.6.23/patches/mux_cli.patch new file mode 100644 index 0000000000..4938371d51 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux_cli.patch @@ -0,0 +1,5396 @@ +Index: linux-2.6.23/drivers/char/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/char/Kconfig 2007-10-10 09:38:43.000000000 +0200 ++++ linux-2.6.23/drivers/char/Kconfig 2007-10-22 22:26:50.000000000 +0200 +@@ -1064,5 +1064,18 @@ + + source "drivers/s390/char/Kconfig" + ++config TS0710_MUX ++ tristate "GSM TS 07.10 Multiplex driver" ++ depends on EZX_BP ++ help ++ This implements the GSM 07.10 multiplex. ++ ++config TS0710_MUX_USB ++ tristate "Motorola USB support for TS 07.10 Multiplex driver" ++ depends on TS0710_MUX ++ help ++ This ads support for TS 07.10 over USB, as found in motorola ++ Smartphones. ++ + endmenu + +Index: linux-2.6.23/drivers/char/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/char/Makefile 2007-10-10 09:38:43.000000000 +0200 ++++ linux-2.6.23/drivers/char/Makefile 2007-10-22 22:26:50.000000000 +0200 +@@ -111,6 +111,9 @@ + obj-$(CONFIG_JS_RTC) += js-rtc.o + js-rtc-y = rtc.o + ++obj-$(CONFIG_TS0710_MUX) += ts0710_mux.o ts0710_mux_usb.o ++ ++ + # Files generated that shall be removed upon make clean + clean-files := consolemap_deftbl.c defkeymap.c + +Index: linux-2.6.23/drivers/char/ts0710.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/char/ts0710.h 2007-10-22 22:26:50.000000000 +0200 +@@ -0,0 +1,368 @@ ++/* ++ * File: ts0710.h ++ * ++ * Portions derived from rfcomm.c, original header as follows: ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Author: Mats Friden <mats.friden@axis.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Exceptionally, Axis Communications AB grants discretionary and ++ * conditional permissions for additional use of the text contained ++ * in the company's release of the AXIS OpenBT Stack under the ++ * provisions set forth hereunder. ++ * ++ * Provided that, if you use the AXIS OpenBT Stack with other files, ++ * that do not implement functionality as specified in the Bluetooth ++ * System specification, to produce an executable, this does not by ++ * itself cause the resulting executable to be covered by the GNU ++ * General Public License. Your use of that executable is in no way ++ * restricted on account of using the AXIS OpenBT Stack code with it. ++ * ++ * This exception does not however invalidate any other reasons why ++ * the executable file might be covered by the provisions of the GNU ++ * General Public License. ++ * ++ */ ++/* ++ * Copyright (C) 2002 Motorola ++ * ++ * 07/28/2002 Initial version based on rfcomm.c ++ * 11/18/2002 Modified ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++ ++#include <linux/errno.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/fcntl.h> ++#include <linux/string.h> ++#include <linux/major.h> ++#include <linux/mm.h> ++#include <linux/init.h> ++#include <linux/devfs_fs_kernel.h> ++ ++#include <asm/uaccess.h> ++#include <asm/system.h> ++#include <asm/bitops.h> ++ ++#include <asm/byteorder.h> ++#include <asm/types.h> ++ ++#define TS0710_MAX_CHN 14 ++ ++#define SET_PF(ctr) ((ctr) | (1 << 4)) ++#define CLR_PF(ctr) ((ctr) & 0xef) ++#define GET_PF(ctr) (((ctr) >> 4) & 0x1) ++ ++#define GET_PN_MSG_FRAME_SIZE(pn) ( ((pn)->frame_sizeh << 8) | ((pn)->frame_sizel)) ++#define SET_PN_MSG_FRAME_SIZE(pn, size) ({ (pn)->frame_sizel = (size) & 0xff; \ ++ (pn)->frame_sizeh = (size) >> 8; }) ++ ++#define GET_LONG_LENGTH(a) ( ((a).h_len << 7) | ((a).l_len) ) ++#define SET_LONG_LENGTH(a, length) ({ (a).ea = 0; \ ++ (a).l_len = length & 0x7F; \ ++ (a).h_len = (length >> 7) & 0xFF; }) ++ ++#define SHORT_CRC_CHECK 3 ++#define LONG_CRC_CHECK 4 ++ ++/* FIXME: Should thsi one be define here? */ ++#define SHORT_PAYLOAD_SIZE 127 ++ ++#define EA 1 ++#define FCS_SIZE 1 ++#define FLAG_SIZE 2 ++ ++#define TS0710_MAX_HDR_SIZE 5 ++#define DEF_TS0710_MTU 256 ++ ++#define TS0710_BASIC_FLAG 0xF9 ++/* the control field */ ++#define SABM 0x2f ++#define SABM_SIZE 4 ++#define UA 0x63 ++#define UA_SIZE 4 ++#define DM 0x0f ++#define DISC 0x43 ++#define UIH 0xef ++ ++/* the type field in a multiplexer command packet */ ++#define TEST 0x8 ++#define FCON 0x28 ++#define FCOFF 0x18 ++#define MSC 0x38 ++#define RPN 0x24 ++#define RLS 0x14 ++#define PN 0x20 ++#define NSC 0x4 ++ ++/* V.24 modem control signals */ ++#define FC 0x2 ++#define RTC 0x4 ++#define RTR 0x8 ++#define IC 0x40 ++#define DV 0x80 ++ ++#define CTRL_CHAN 0 /* The control channel is defined as DLCI 0 */ ++#define MCC_CMD 1 /* Multiplexer command cr */ ++#define MCC_RSP 0 /* Multiplexer response cr */ ++ ++#ifdef __LITTLE_ENDIAN_BITFIELD ++ ++typedef struct { ++ __u8 ea:1; ++ __u8 cr:1; ++ __u8 d:1; ++ __u8 server_chn:5; ++} __attribute__ ((packed)) address_field; ++ ++typedef struct { ++ __u8 ea:1; ++ __u8 len:7; ++} __attribute__ ((packed)) short_length; ++ ++typedef struct { ++ __u8 ea:1; ++ __u8 l_len:7; ++ __u8 h_len; ++} __attribute__ ((packed)) long_length; ++ ++typedef struct { ++ address_field addr; ++ __u8 control; ++ short_length length; ++} __attribute__ ((packed)) short_frame_head; ++ ++typedef struct { ++ short_frame_head h; ++ __u8 data[0]; ++} __attribute__ ((packed)) short_frame; ++ ++typedef struct { ++ address_field addr; ++ __u8 control; ++ long_length length; ++ __u8 data[0]; ++} __attribute__ ((packed)) long_frame_head; ++ ++typedef struct { ++ long_frame_head h; ++ __u8 data[0]; ++} __attribute__ ((packed)) long_frame; ++ ++/* Typedefinitions for structures used for the multiplexer commands */ ++typedef struct { ++ __u8 ea:1; ++ __u8 cr:1; ++ __u8 type:6; ++} __attribute__ ((packed)) mcc_type; ++ ++typedef struct { ++ mcc_type type; ++ short_length length; ++ __u8 value[0]; ++} __attribute__ ((packed)) mcc_short_frame_head; ++ ++typedef struct { ++ mcc_short_frame_head h; ++ __u8 value[0]; ++} __attribute__ ((packed)) mcc_short_frame; ++ ++typedef struct { ++ mcc_type type; ++ long_length length; ++ __u8 value[0]; ++} __attribute__ ((packed)) mcc_long_frame_head; ++ ++typedef struct { ++ mcc_long_frame_head h; ++ __u8 value[0]; ++} __attribute__ ((packed)) mcc_long_frame; ++ ++/* MSC-command */ ++typedef struct { ++ __u8 ea:1; ++ __u8 fc:1; ++ __u8 rtc:1; ++ __u8 rtr:1; ++ __u8 reserved:2; ++ __u8 ic:1; ++ __u8 dv:1; ++} __attribute__ ((packed)) v24_sigs; ++ ++typedef struct { ++ __u8 ea:1; ++ __u8 b1:1; ++ __u8 b2:1; ++ __u8 b3:1; ++ __u8 len:4; ++} __attribute__ ((packed)) brk_sigs; ++ ++typedef struct { ++ short_frame_head s_head; ++ mcc_short_frame_head mcc_s_head; ++ address_field dlci; ++ __u8 v24_sigs; ++ //brk_sigs break_signals; ++ __u8 fcs; ++} __attribute__ ((packed)) msc_msg; ++ ++#if 0 ++/* conflict with termios.h */ ++/* RPN command */ ++#define B2400 0 ++#define B4800 1 ++#define B7200 2 ++#define B9600 3 ++#define B19200 4 ++#define B38400 5 ++#define B57600 6 ++#define B115200 7 ++#define D230400 8 ++#endif ++ ++/* ++typedef struct{ ++ __u8 bit_rate:1; ++ __u8 data_bits:1; ++ __u8 stop_bit:1; ++ __u8 parity:1; ++ __u8 parity_type:1; ++ __u8 xon_u8:1; ++ __u8 xoff_u8:1; ++ __u8 res1:1; ++ __u8 xon_input:1; ++ __u8 xon_output:1; ++ __u8 rtr_input:1; ++ __u8 rtr_output:1; ++ __u8 rtc_input:1; ++ __u8 rtc_output:1; ++ __u8 res2:2; ++} __attribute__((packed)) parameter_mask; ++ ++typedef struct{ ++ __u8 bit_rate; ++ __u8 data_bits:2; ++ __u8 stop_bit:1; ++ __u8 parity:1; ++ __u8 parity_type:2; ++ __u8 res1:2; ++ __u8 xon_input:1; ++ __u8 xon_output:1; ++ __u8 rtr_input:1; ++ __u8 rtr_output:1; ++ __u8 rtc_input:1; ++ __u8 rtc_output:1; ++ __u8 res2:2; ++ __u8 xon_u8; ++ __u8 xoff_u8; ++ parameter_mask pm; ++} __attribute__((packed)) rpn_values; ++ ++typedef struct{ ++ short_frame_head s_head; ++ mcc_short_frame_head mcc_s_head; ++ address_field dlci; ++ rpn_values rpn_val; ++ __u8 fcs; ++} __attribute__((packed)) rpn_msg; ++*/ ++ ++/* RLS-command */ ++/* ++typedef struct{ ++ short_frame_head s_head; ++ mcc_short_frame_head mcc_s_head; ++ address_field dlci; ++ __u8 error:4; ++ __u8 res:4; ++ __u8 fcs; ++} __attribute__((packed)) rls_msg; ++*/ ++ ++/* PN-command */ ++typedef struct { ++ short_frame_head s_head; ++ mcc_short_frame_head mcc_s_head; ++ __u8 dlci:6; ++ __u8 res1:2; ++ __u8 frame_type:4; ++ __u8 credit_flow:4; ++ __u8 prior:6; ++ __u8 res2:2; ++ __u8 ack_timer; ++ __u8 frame_sizel; ++ __u8 frame_sizeh; ++ __u8 max_nbrof_retrans; ++ __u8 credits; ++ __u8 fcs; ++} __attribute__ ((packed)) pn_msg; ++ ++/* NSC-command */ ++typedef struct { ++ short_frame_head s_head; ++ mcc_short_frame_head mcc_s_head; ++ mcc_type command_type; ++ __u8 fcs; ++} __attribute__ ((packed)) nsc_msg; ++ ++#else ++#error Only littel-endianess supported now! ++#endif ++ ++enum { ++ REJECTED = 0, ++ DISCONNECTED, ++ CONNECTING, ++ NEGOTIATING, ++ CONNECTED, ++ DISCONNECTING, ++ FLOW_STOPPED ++}; ++ ++enum ts0710_events { ++ CONNECT_IND, ++ CONNECT_CFM, ++ DISCONN_CFM ++}; ++ ++typedef struct { ++ volatile __u8 state; ++ volatile __u8 flow_control; ++ volatile __u8 initiated; ++ volatile __u8 initiator; ++ volatile __u16 mtu; ++ wait_queue_head_t open_wait; ++ wait_queue_head_t close_wait; ++} dlci_struct; ++ ++/* user space interfaces */ ++typedef struct { ++ volatile __u8 initiator; ++ volatile __u8 c_dlci; ++ volatile __u16 mtu; ++ volatile __u8 be_testing; ++ volatile __u32 test_errs; ++ wait_queue_head_t test_wait; ++ ++ dlci_struct dlci[TS0710_MAX_CHN]; ++} ts0710_con; +Index: linux-2.6.23/drivers/char/ts0710_mux.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/char/ts0710_mux.c 2007-10-22 22:26:50.000000000 +0200 +@@ -0,0 +1,3966 @@ ++/* ++ * File: mux_driver.c ++ * ++ * Portions derived from rfcomm.c, original header as follows: ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Author: Mats Friden <mats.friden@axis.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Exceptionally, Axis Communications AB grants discretionary and ++ * conditional permissions for additional use of the text contained ++ * in the company's release of the AXIS OpenBT Stack under the ++ * provisions set forth hereunder. ++ * ++ * Provided that, if you use the AXIS OpenBT Stack with other files, ++ * that do not implement functionality as specified in the Bluetooth ++ * System specification, to produce an executable, this does not by ++ * itself cause the resulting executable to be covered by the GNU ++ * General Public License. Your use of that executable is in no way ++ * restricted on account of using the AXIS OpenBT Stack code with it. ++ * ++ * This exception does not however invalidate any other reasons why ++ * the executable file might be covered by the provisions of the GNU ++ * General Public License. ++ * ++ */ ++/* ++ * Copyright (C) 2002-2004 Motorola ++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org> ++ * ++ * 07/28/2002 Initial version ++ * 11/18/2002 Second version ++ * 04/21/2004 Add GPRS PROC ++ */ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/types.h> ++ ++#include <linux/kernel.h> ++#include <linux/proc_fs.h> ++ ++#define USB_FOR_MUX ++ ++#ifndef USB_FOR_MUX ++#include <linux/serial.h> ++#endif ++ ++#include <linux/errno.h> ++#include <linux/sched.h> ++#include <linux/interrupt.h> ++#include <linux/tty.h> ++#include <linux/tty_flip.h> ++#include <linux/fcntl.h> ++#include <linux/string.h> ++#include <linux/major.h> ++#include <linux/mm.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/devfs_fs_kernel.h> ++//#include <syslog.h> ++ ++#include <asm/uaccess.h> ++#include <asm/system.h> ++#include <asm/bitops.h> ++ ++#ifdef USB_FOR_MUX ++//#include <linux/usb.h> ++#include "ts0710_mux_usb.h" ++#endif ++ ++#include "ts0710.h" ++#include "ts0710_mux.h" ++ ++#define TS0710MUX_GPRS_SESSION_MAX 2 ++#define TS0710MUX_MAJOR 250 ++#define TS0710MUX_MINOR_START 0 ++#define NR_MUXS 16 ++ ++ /*#define TS0710MUX_TIME_OUT 30 *//* 300ms */ ++#define TS0710MUX_TIME_OUT 250 /* 2500ms, for BP UART hardware flow control AP UART */ ++ ++#define TS0710MUX_IO_DLCI_FC_ON 0x54F2 ++#define TS0710MUX_IO_DLCI_FC_OFF 0x54F3 ++#define TS0710MUX_IO_FC_ON 0x54F4 ++#define TS0710MUX_IO_FC_OFF 0x54F5 ++ ++#define TS0710MUX_MAX_BUF_SIZE 2048 ++ ++#define TS0710MUX_SEND_BUF_OFFSET 10 ++#define TS0710MUX_SEND_BUF_SIZE (DEF_TS0710_MTU + TS0710MUX_SEND_BUF_OFFSET + 34) ++#define TS0710MUX_RECV_BUF_SIZE TS0710MUX_SEND_BUF_SIZE ++ ++/*For BP UART problem Begin*/ ++#ifdef TS0710SEQ2 ++#define ACK_SPACE 66 /* 6 * 11(ACK frame size) */ ++#else ++#define ACK_SPACE 42 /* 6 * 7(ACK frame size) */ ++#endif ++/*For BP UART problem End*/ ++ ++ /*#define TS0710MUX_SERIAL_BUF_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE)*//* For BP UART problem */ ++#define TS0710MUX_SERIAL_BUF_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE + ACK_SPACE) /* For BP UART problem: ACK_SPACE */ ++ ++#define TS0710MUX_MAX_TOTAL_FRAME_SIZE (DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE + FLAG_SIZE) ++#define TS0710MUX_MAX_CHARS_IN_BUF 65535 ++#define TS0710MUX_THROTTLE_THRESHOLD DEF_TS0710_MTU ++ ++#define TEST_PATTERN_SIZE 250 ++ ++#define CMDTAG 0x55 ++#define DATATAG 0xAA ++ ++#define ACK 0x4F /*For BP UART problem */ ++ ++/*For BP UART problem Begin*/ ++#ifdef TS0710SEQ2 ++#define FIRST_BP_SEQ_OFFSET 1 /*offset from start flag */ ++#define SECOND_BP_SEQ_OFFSET 2 /*offset from start flag */ ++#define FIRST_AP_SEQ_OFFSET 3 /*offset from start flag */ ++#define SECOND_AP_SEQ_OFFSET 4 /*offset from start flag */ ++#define SLIDE_BP_SEQ_OFFSET 5 /*offset from start flag */ ++#define SEQ_FIELD_SIZE 5 ++#else ++#define SLIDE_BP_SEQ_OFFSET 1 /*offset from start flag */ ++#define SEQ_FIELD_SIZE 1 ++#endif ++ ++#define ADDRESS_FIELD_OFFSET (1 + SEQ_FIELD_SIZE) /*offset from start flag */ ++/*For BP UART problem End*/ ++ ++#ifndef UNUSED_PARAM ++#define UNUSED_PARAM(v) (void)(v) ++#endif ++ ++#define TS0710MUX_GPRS1_DLCI 7 ++#define TS0710MUX_GPRS2_DLCI 8 ++ ++#define TS0710MUX_GPRS1_RECV_COUNT_IDX 0 ++#define TS0710MUX_GPRS1_SEND_COUNT_IDX 1 ++#define TS0710MUX_GPRS2_RECV_COUNT_IDX 2 ++#define TS0710MUX_GPRS2_SEND_COUNT_IDX 3 ++#define TS0710MUX_COUNT_MAX_IDX 3 ++#define TS0710MUX_COUNT_IDX_NUM (TS0710MUX_COUNT_MAX_IDX + 1) ++ ++static volatile int mux_data_count[TS0710MUX_COUNT_IDX_NUM] = { 0, 0, 0, 0 }; ++static volatile int mux_data_count2[TS0710MUX_COUNT_IDX_NUM] = { 0, 0, 0, 0 }; ++static struct semaphore mux_data_count_mutex[TS0710MUX_COUNT_IDX_NUM]; ++static volatile __u8 post_recv_count_flag = 0; ++ ++/*PROC file*/ ++struct proc_dir_entry *gprs_proc_file = NULL; ++ssize_t file_proc_read(struct file *file, char *buf, size_t size, ++ loff_t * ppos); ++ssize_t file_proc_write(struct file *file, const char *buf, size_t count, ++ loff_t * ppos); ++struct file_operations file_proc_operations = { ++ read:file_proc_read, ++ write:file_proc_write, ++}; ++typedef struct { ++ int recvBytes; ++ int sentBytes; ++} gprs_bytes; ++ ++static __u8 tty2dlci[NR_MUXS] = ++ { 1, 2, 3, 4, 5, 6, 7, 8, 6, 7, 8, 9, 10, 11, 12, 13 }; ++static __u8 iscmdtty[NR_MUXS] = ++ { 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0 }; ++typedef struct { ++ __u8 cmdtty; ++ __u8 datatty; ++} dlci_tty; ++static dlci_tty dlci2tty[] = { {0, 0}, /* DLCI 0 */ ++{0, 0}, /* DLCI 1 */ ++{1, 1}, /* DLCI 2 */ ++{2, 2}, /* DLCI 3 */ ++{3, 3}, /* DLCI 4 */ ++{4, 4}, /* DLCI 5 */ ++{5, 8}, /* DLCI 6 */ ++{6, 9}, /* DLCI 7 */ ++{7, 10}, /* DLCI 8 */ ++{11, 11}, /* DLCI 9 */ ++{12, 12}, /* DLCI 10 */ ++{13, 13}, /* DLCI 11 */ ++{14, 14}, /* DLCI 12 */ ++{15, 15} ++}; /* DLCI 13 */ ++ ++typedef struct { ++ volatile __u8 buf[TS0710MUX_SEND_BUF_SIZE]; ++ volatile __u8 *frame; ++ unsigned long flags; ++ volatile __u16 length; ++ volatile __u8 filled; ++ volatile __u8 dummy; /* Allignment to 4*n bytes */ ++} mux_send_struct; ++ ++/* Bit number in flags of mux_send_struct */ ++#define BUF_BUSY 0 ++ ++struct mux_recv_packet_tag { ++ __u8 *data; ++ __u32 length; ++ struct mux_recv_packet_tag *next; ++}; ++typedef struct mux_recv_packet_tag mux_recv_packet; ++ ++struct mux_recv_struct_tag { ++ __u8 data[TS0710MUX_RECV_BUF_SIZE]; ++ __u32 length; ++ __u32 total; ++ mux_recv_packet *mux_packet; ++ struct mux_recv_struct_tag *next; ++ int no_tty; ++ volatile __u8 post_unthrottle; ++}; ++typedef struct mux_recv_struct_tag mux_recv_struct; ++ ++#define RECV_RUNNING 0 ++static unsigned long mux_recv_flags = 0; ++ ++static mux_send_struct *mux_send_info[NR_MUXS]; ++static volatile __u8 mux_send_info_flags[NR_MUXS]; ++static volatile __u8 mux_send_info_idx = NR_MUXS; ++ ++static mux_recv_struct *mux_recv_info[NR_MUXS]; ++static volatile __u8 mux_recv_info_flags[NR_MUXS]; ++static mux_recv_struct *mux_recv_queue = NULL; ++ ++static struct tty_driver mux_driver; ++ ++#ifdef USB_FOR_MUX ++#define COMM_FOR_MUX_DRIVER usb_for_mux_driver ++#define COMM_FOR_MUX_TTY usb_for_mux_tty ++#define COMM_MUX_DISPATCHER usb_mux_dispatcher ++#define COMM_MUX_SENDER usb_mux_sender ++#else ++#define COMM_FOR_MUX_DRIVER serial_for_mux_driver ++#define COMM_FOR_MUX_TTY serial_for_mux_tty ++#define COMM_MUX_DISPATCHER serial_mux_dispatcher ++#define COMM_MUX_SENDER serial_mux_sender ++ ++extern struct list_head *tq_serial_for_mux; ++#endif ++ ++extern struct tty_driver *COMM_FOR_MUX_DRIVER; ++extern struct tty_struct *COMM_FOR_MUX_TTY; ++extern void (*COMM_MUX_DISPATCHER) (struct tty_struct * tty); ++extern void (*COMM_MUX_SENDER) (void); ++ ++static struct work_struct send_tqueue; ++static struct work_struct receive_tqueue; ++static struct work_struct post_recv_tqueue; ++ ++static struct tty_struct *mux_table[NR_MUXS]; ++static struct termios *mux_termios[NR_MUXS]; ++static struct termios *mux_termios_locked[NR_MUXS]; ++static volatile short int mux_tty[NR_MUXS]; ++ ++#ifdef min ++#undef min ++#define min(a,b) ( (a)<(b) ? (a):(b) ) ++#endif ++ ++static int get_count(__u8 idx); ++static int set_count(__u8 idx, int count); ++static int add_count(__u8 idx, int count); ++ ++static int send_ua(ts0710_con * ts0710, __u8 dlci); ++static int send_dm(ts0710_con * ts0710, __u8 dlci); ++static int send_sabm(ts0710_con * ts0710, __u8 dlci); ++static int send_disc(ts0710_con * ts0710, __u8 dlci); ++static void queue_uih(mux_send_struct * send_info, __u16 len, ++ ts0710_con * ts0710, __u8 dlci); ++static int send_pn_msg(ts0710_con * ts0710, __u8 prior, __u32 frame_size, ++ __u8 credit_flow, __u8 credits, __u8 dlci, __u8 cr); ++static int send_nsc_msg(ts0710_con * ts0710, mcc_type cmd, __u8 cr); ++static void set_uih_hdr(short_frame * uih_pkt, __u8 dlci, __u32 len, __u8 cr); ++ ++static __u32 crc_check(__u8 * data, __u32 length, __u8 check_sum); ++static __u8 crc_calc(__u8 * data, __u32 length); ++static void create_crctable(__u8 table[]); ++ ++static void mux_sched_send(void); ++ ++static __u8 crctable[256]; ++ ++static ts0710_con ts0710_connection; ++/* ++static rpn_values rpn_val; ++*/ ++ ++static int valid_dlci(__u8 dlci) ++{ ++ if ((dlci < TS0710_MAX_CHN) && (dlci > 0)) ++ return 1; ++ else ++ return 0; ++} ++ ++#ifdef TS0710DEBUG ++ ++#ifdef PRINT_OUTPUT_PRINTK ++#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX " __FUNCTION__ ": " fmt "\n" , ## arg) ++#else ++#include "ezxlog.h" ++static __u8 strDebug[256]; ++#define TS0710_DEBUG(fmt, arg...) ({ snprintf(strDebug, sizeof(strDebug), "MUX " __FUNCTION__ ": " fmt "\n" , ## arg); \ ++ /*printk("%s", strDebug)*/ezxlogk("MX", strDebug, strlen(strDebug)); }) ++#endif /* End #ifdef PRINT_OUTPUT_PRINTK */ ++ ++#else ++#define TS0710_DEBUG(fmt...) ++#endif /* End #ifdef TS0710DEBUG */ ++ ++#ifdef TS0710LOG ++static unsigned char g_tbuf[TS0710MUX_MAX_BUF_SIZE]; ++#ifdef PRINT_OUTPUT_PRINTK ++#define TS0710_LOG(fmt, arg...) printk(fmt, ## arg) ++#define TS0710_PRINTK(fmt, arg...) printk(fmt, ## arg) ++#else ++#include "ezxlog.h" ++static __u8 strLog[256]; ++#define TS0710_LOG(fmt, arg...) ({ snprintf(strLog, sizeof(strLog), fmt, ## arg); \ ++ /*printk("%s", strLog)*/ezxlogk("MX", strLog, strlen(strLog)); }) ++#define TS0710_PRINTK(fmt, arg...) ({ printk(fmt, ## arg); \ ++ TS0710_LOG(fmt, ## arg); }) ++#endif /* End #ifdef PRINT_OUTPUT_PRINTK */ ++ ++#else ++#define TS0710_LOG(fmt...) ++#define TS0710_PRINTK(fmt, arg...) printk(fmt, ## arg) ++#endif /* End #ifdef TS0710LOG */ ++ ++#ifdef TS0710DEBUG ++static void TS0710_DEBUGHEX(__u8 * buf, int len) ++{ ++ static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE]; ++ ++ int i; ++ int c; ++ ++ if (len <= 0) { ++ return; ++ } ++ ++ c = 0; ++ for (i = 0; (i < len) && (c < (TS0710MUX_MAX_BUF_SIZE - 3)); i++) { ++ sprintf(&tbuf[c], "%02x ", buf[i]); ++ c += 3; ++ } ++ tbuf[c] = 0; ++ ++#ifdef PRINT_OUTPUT_PRINTK ++ TS0710_DEBUG("%s", tbuf); ++#else ++ /*printk("%s\n", tbuf) */ ezxlogk("MX", tbuf, c); ++#endif ++} ++static void TS0710_DEBUGSTR(__u8 * buf, int len) ++{ ++ static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE]; ++ ++ if (len <= 0) { ++ return; ++ } ++ ++ if (len > (TS0710MUX_MAX_BUF_SIZE - 1)) { ++ len = (TS0710MUX_MAX_BUF_SIZE - 1); ++ } ++ ++ memcpy(tbuf, buf, len); ++ tbuf[len] = 0; ++ ++#ifdef PRINT_OUTPUT_PRINTK ++ /* 0x00 byte in the string pointed by tbuf may truncate the print result */ ++ TS0710_DEBUG("%s", tbuf); ++#else ++ /*printk("%s\n", tbuf) */ ezxlogk("MX", tbuf, len); ++#endif ++} ++#else ++#define TS0710_DEBUGHEX(buf, len) ++#define TS0710_DEBUGSTR(buf, len) ++#endif /* End #ifdef TS0710DEBUG */ ++ ++#ifdef TS0710LOG ++static void TS0710_LOGSTR_FRAME(__u8 send, __u8 * data, int len) ++{ ++ short_frame *short_pkt; ++ long_frame *long_pkt; ++ __u8 *uih_data_start; ++ __u32 uih_len; ++ __u8 dlci; ++ int pos; ++ ++ if (len <= 0) { ++ return; ++ } ++ ++ pos = 0; ++ if (send) { ++ pos += sprintf(&g_tbuf[pos], "<"); ++ short_pkt = (short_frame *) (data + 1); /*For BP UART problem */ ++ } else { ++ /*For BP UART problem */ ++ /*pos += sprintf(&g_tbuf[pos], ">"); */ ++ pos += sprintf(&g_tbuf[pos], ">%d ", *(data + SLIDE_BP_SEQ_OFFSET)); /*For BP UART problem */ ++ ++#ifdef TS0710SEQ2 ++ pos += sprintf(&g_tbuf[pos], "%02x %02x %02x %02x ", *(data + FIRST_BP_SEQ_OFFSET), *(data + SECOND_BP_SEQ_OFFSET), *(data + FIRST_AP_SEQ_OFFSET), *(data + SECOND_AP_SEQ_OFFSET)); /*For BP UART problem */ ++#endif ++ ++ short_pkt = (short_frame *) (data + ADDRESS_FIELD_OFFSET); /*For BP UART problem */ ++ } ++ ++ /*For BP UART problem */ ++ /*short_pkt = (short_frame *)(data + 1); */ ++ ++ dlci = short_pkt->h.addr.server_chn << 1 | short_pkt->h.addr.d; ++ switch (CLR_PF(short_pkt->h.control)) { ++ case SABM: ++ pos += sprintf(&g_tbuf[pos], "C SABM %d ::", dlci); ++ break; ++ case UA: ++ pos += sprintf(&g_tbuf[pos], "C UA %d ::", dlci); ++ break; ++ case DM: ++ pos += sprintf(&g_tbuf[pos], "C DM %d ::", dlci); ++ break; ++ case DISC: ++ pos += sprintf(&g_tbuf[pos], "C DISC %d ::", dlci); ++ break; ++ ++ /*For BP UART problem Begin */ ++ case ACK: ++ pos += sprintf(&g_tbuf[pos], "C ACK %d ", short_pkt->data[0]); ++ ++#ifdef TS0710SEQ2 ++ pos += sprintf(&g_tbuf[pos], "%02x %02x %02x %02x ", short_pkt->data[1], short_pkt->data[2], short_pkt->data[3], short_pkt->data[4]); /*For BP UART problem */ ++#endif ++ ++ pos += sprintf(&g_tbuf[pos], "::"); ++ break; ++ /*For BP UART problem End */ ++ ++ case UIH: ++ if (!dlci) { ++ pos += sprintf(&g_tbuf[pos], "C MCC %d ::", dlci); ++ } else { ++ ++ if ((short_pkt->h.length.ea) == 0) { ++ long_pkt = (long_frame *) short_pkt; ++ uih_len = GET_LONG_LENGTH(long_pkt->h.length); ++ uih_data_start = long_pkt->h.data; ++ } else { ++ uih_len = short_pkt->h.length.len; ++ uih_data_start = short_pkt->data; ++ } ++ switch (*uih_data_start) { ++ case CMDTAG: ++ pos += ++ sprintf(&g_tbuf[pos], "I %d A %d ::", dlci, ++ uih_len); ++ break; ++ case DATATAG: ++ default: ++ pos += ++ sprintf(&g_tbuf[pos], "I %d D %d ::", dlci, ++ uih_len); ++ break; ++ } ++ ++ } ++ break; ++ default: ++ pos += sprintf(&g_tbuf[pos], "N!!! %d ::", dlci); ++ break; ++ } ++ ++ if (len > (sizeof(g_tbuf) - pos - 1)) { ++ len = (sizeof(g_tbuf) - pos - 1); ++ } ++ ++ memcpy(&g_tbuf[pos], data, len); ++ pos += len; ++ g_tbuf[pos] = 0; ++ ++#ifdef PRINT_OUTPUT_PRINTK ++ /* 0x00 byte in the string pointed by g_tbuf may truncate the print result */ ++ TS0710_LOG("%s\n", g_tbuf); ++#else ++ /*printk("%s\n", g_tbuf) */ ezxlogk("MX", g_tbuf, pos); ++#endif ++} ++#else ++#define TS0710_LOGSTR_FRAME(send, data, len) ++#endif ++ ++#ifdef TS0710SIG ++#define my_for_each_task(p) \ ++ for ((p) = current; ((p) = (p)->next_task) != current; ) ++ ++static void TS0710_SIG2APLOGD(void) ++{ ++ struct task_struct *p; ++ static __u8 sig = 0; ++ ++ if (sig) { ++ return; ++ } ++ ++ read_lock(&tasklist_lock); ++ my_for_each_task(p) { ++ if (strncmp(p->comm, "aplogd", 6) == 0) { ++ sig = 1; ++ if (send_sig(SIGUSR2, p, 1) == 0) { ++ TS0710_PRINTK ++ ("MUX: success to send SIGUSR2 to aplogd!\n"); ++ } else { ++ TS0710_PRINTK ++ ("MUX: failure to send SIGUSR2 to aplogd!\n"); ++ } ++ break; ++ } ++ } ++ read_unlock(&tasklist_lock); ++ ++ if (!sig) { ++ TS0710_PRINTK("MUX: not found aplogd!\n"); ++ } ++} ++#else ++#define TS0710_SIG2APLOGD() ++#endif ++ ++static int basic_write(ts0710_con * ts0710, __u8 * buf, int len) ++{ ++ int res; ++ ++ UNUSED_PARAM(ts0710); ++ ++ buf[0] = TS0710_BASIC_FLAG; ++ buf[len + 1] = TS0710_BASIC_FLAG; ++ ++ if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) { ++ TS0710_PRINTK ++ ("MUX basic_write: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n"); ++ ++#ifndef USB_FOR_MUX ++ TS0710_PRINTK ++ ("MUX basic_write: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n"); ++ TS0710_SIG2APLOGD(); ++#endif ++ ++ return -1; ++ } ++ ++ TS0710_LOGSTR_FRAME(1, buf, len + 2); ++ TS0710_DEBUGHEX(buf, len + 2); ++ ++ res = COMM_FOR_MUX_DRIVER->write(COMM_FOR_MUX_TTY, buf, len + 2); ++ ++ if (res != len + 2) { ++ TS0710_PRINTK("MUX basic_write: Write Error!\n"); ++ return -1; ++ } ++ ++ return len + 2; ++} ++ ++/* Functions for the crc-check and calculation */ ++ ++#define CRC_VALID 0xcf ++ ++static __u32 crc_check(__u8 * data, __u32 length, __u8 check_sum) ++{ ++ __u8 fcs = 0xff; ++ ++ while (length--) { ++ fcs = crctable[fcs ^ *data++]; ++ } ++ fcs = crctable[fcs ^ check_sum]; ++ TS0710_DEBUG("fcs : %d\n", fcs); ++ if (fcs == (uint) 0xcf) { /*CRC_VALID) */ ++ TS0710_DEBUG("crc_check: CRC check OK\n"); ++ return 0; ++ } else { ++ TS0710_PRINTK("MUX crc_check: CRC check failed\n"); ++ return 1; ++ } ++} ++ ++/* Calculates the checksum according to the ts0710 specification */ ++ ++static __u8 crc_calc(__u8 * data, __u32 length) ++{ ++ __u8 fcs = 0xff; ++ ++ while (length--) { ++ fcs = crctable[fcs ^ *data++]; ++ } ++ ++ return 0xff - fcs; ++} ++ ++/* Calulates a reversed CRC table for the FCS check */ ++ ++static void create_crctable(__u8 table[]) ++{ ++ int i, j; ++ ++ __u8 data; ++ __u8 code_word = (__u8) 0xe0; ++ __u8 sr = (__u8) 0; ++ ++ for (j = 0; j < 256; j++) { ++ data = (__u8) j; ++ ++ for (i = 0; i < 8; i++) { ++ if ((data & 0x1) ^ (sr & 0x1)) { ++ sr >>= 1; ++ sr ^= code_word; ++ } else { ++ sr >>= 1; ++ } ++ ++ data >>= 1; ++ sr &= 0xff; ++ } ++ ++ table[j] = sr; ++ sr = 0; ++ } ++} ++ ++static void ts0710_reset_dlci(__u8 j) ++{ ++ if (j >= TS0710_MAX_CHN) ++ return; ++ ++ ts0710_connection.dlci[j].state = DISCONNECTED; ++ ts0710_connection.dlci[j].flow_control = 0; ++ ts0710_connection.dlci[j].mtu = DEF_TS0710_MTU; ++ ts0710_connection.dlci[j].initiated = 0; ++ ts0710_connection.dlci[j].initiator = 0; ++ init_waitqueue_head(&ts0710_connection.dlci[j].open_wait); ++ init_waitqueue_head(&ts0710_connection.dlci[j].close_wait); ++} ++ ++static void ts0710_reset_con(void) ++{ ++ __u8 j; ++ ++ ts0710_connection.initiator = 0; ++ ts0710_connection.mtu = DEF_TS0710_MTU + TS0710_MAX_HDR_SIZE; ++ ts0710_connection.be_testing = 0; ++ ts0710_connection.test_errs = 0; ++ init_waitqueue_head(&ts0710_connection.test_wait); ++ ++ for (j = 0; j < TS0710_MAX_CHN; j++) { ++ ts0710_reset_dlci(j); ++ } ++} ++ ++static void ts0710_init(void) ++{ ++ create_crctable(crctable); ++ ++ ts0710_reset_con(); ++ ++ /* Set the values in the rpn octets */ ++/* ++ rpn_val.bit_rate = 7; ++ rpn_val.data_bits = 3; ++ rpn_val.stop_bit = 0; ++ rpn_val.parity = 0; ++ rpn_val.parity_type = 0; ++ rpn_val.res1 = 0; ++ rpn_val.xon_input = 0; ++ rpn_val.xon_output = 0; ++ rpn_val.rtr_input = 0; ++ rpn_val.rtr_output = 0; ++ rpn_val.rtc_input = 0; ++ rpn_val.rtc_output = 0; ++ rpn_val.res2 = 0; ++ rpn_val.xon_u8 = 0x11; ++ rpn_val.xoff_u8 = 0x13; ++ memset(&rpn_val.pm, 0 , 2); *//* Set the mask to zero */ ++} ++ ++static void ts0710_upon_disconnect(void) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ __u8 j; ++ ++ for (j = 0; j < TS0710_MAX_CHN; j++) { ++ ts0710->dlci[j].state = DISCONNECTED; ++ wake_up_interruptible(&ts0710->dlci[j].open_wait); ++ wake_up_interruptible(&ts0710->dlci[j].close_wait); ++ } ++ ts0710->be_testing = 0; ++ wake_up_interruptible(&ts0710->test_wait); ++ ts0710_reset_con(); ++} ++ ++/* Sending packet functions */ ++ ++/* Creates a UA packet and puts it at the beginning of the pkt pointer */ ++ ++static int send_ua(ts0710_con * ts0710, __u8 dlci) ++{ ++ __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE]; ++ short_frame *ua; ++ ++ TS0710_DEBUG("send_ua: Creating UA packet to DLCI %d\n", dlci); ++ ++ ua = (short_frame *) (buf + 1); ++ ua->h.addr.ea = 1; ++ ua->h.addr.cr = ((~(ts0710->initiator)) & 0x1); ++ ua->h.addr.d = (dlci) & 0x1; ++ ua->h.addr.server_chn = (dlci) >> 0x1; ++ ua->h.control = SET_PF(UA); ++ ua->h.length.ea = 1; ++ ua->h.length.len = 0; ++ ua->data[0] = crc_calc((__u8 *) ua, SHORT_CRC_CHECK); ++ ++ return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE); ++} ++ ++/* Creates a DM packet and puts it at the beginning of the pkt pointer */ ++ ++static int send_dm(ts0710_con * ts0710, __u8 dlci) ++{ ++ __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE]; ++ short_frame *dm; ++ ++ TS0710_DEBUG("send_dm: Creating DM packet to DLCI %d\n", dlci); ++ ++ dm = (short_frame *) (buf + 1); ++ dm->h.addr.ea = 1; ++ dm->h.addr.cr = ((~(ts0710->initiator)) & 0x1); ++ dm->h.addr.d = dlci & 0x1; ++ dm->h.addr.server_chn = dlci >> 0x1; ++ dm->h.control = SET_PF(DM); ++ dm->h.length.ea = 1; ++ dm->h.length.len = 0; ++ dm->data[0] = crc_calc((__u8 *) dm, SHORT_CRC_CHECK); ++ ++ return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE); ++} ++ ++static int send_sabm(ts0710_con * ts0710, __u8 dlci) ++{ ++ __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE]; ++ short_frame *sabm; ++ ++ TS0710_DEBUG("send_sabm: Creating SABM packet to DLCI %d\n", dlci); ++ ++ sabm = (short_frame *) (buf + 1); ++ sabm->h.addr.ea = 1; ++ sabm->h.addr.cr = ((ts0710->initiator) & 0x1); ++ sabm->h.addr.d = dlci & 0x1; ++ sabm->h.addr.server_chn = dlci >> 0x1; ++ sabm->h.control = SET_PF(SABM); ++ sabm->h.length.ea = 1; ++ sabm->h.length.len = 0; ++ sabm->data[0] = crc_calc((__u8 *) sabm, SHORT_CRC_CHECK); ++ ++ return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE); ++} ++ ++static int send_disc(ts0710_con * ts0710, __u8 dlci) ++{ ++ __u8 buf[sizeof(short_frame) + FCS_SIZE + FLAG_SIZE]; ++ short_frame *disc; ++ ++ TS0710_DEBUG("send_disc: Creating DISC packet to DLCI %d\n", dlci); ++ ++ disc = (short_frame *) (buf + 1); ++ disc->h.addr.ea = 1; ++ disc->h.addr.cr = ((ts0710->initiator) & 0x1); ++ disc->h.addr.d = dlci & 0x1; ++ disc->h.addr.server_chn = dlci >> 0x1; ++ disc->h.control = SET_PF(DISC); ++ disc->h.length.ea = 1; ++ disc->h.length.len = 0; ++ disc->data[0] = crc_calc((__u8 *) disc, SHORT_CRC_CHECK); ++ ++ return basic_write(ts0710, buf, sizeof(short_frame) + FCS_SIZE); ++} ++ ++static void queue_uih(mux_send_struct * send_info, __u16 len, ++ ts0710_con * ts0710, __u8 dlci) ++{ ++ __u32 size; ++ ++ TS0710_DEBUG ++ ("queue_uih: Creating UIH packet with %d bytes data to DLCI %d\n", ++ len, dlci); ++ ++ if (len > SHORT_PAYLOAD_SIZE) { ++ long_frame *l_pkt; ++ ++ size = sizeof(long_frame) + len + FCS_SIZE; ++ l_pkt = (long_frame *) (send_info->frame - sizeof(long_frame)); ++ set_uih_hdr((void *)l_pkt, dlci, len, ts0710->initiator); ++ l_pkt->data[len] = crc_calc((__u8 *) l_pkt, LONG_CRC_CHECK); ++ send_info->frame = ((__u8 *) l_pkt) - 1; ++ } else { ++ short_frame *s_pkt; ++ ++ size = sizeof(short_frame) + len + FCS_SIZE; ++ s_pkt = ++ (short_frame *) (send_info->frame - sizeof(short_frame)); ++ set_uih_hdr((void *)s_pkt, dlci, len, ts0710->initiator); ++ s_pkt->data[len] = crc_calc((__u8 *) s_pkt, SHORT_CRC_CHECK); ++ send_info->frame = ((__u8 *) s_pkt) - 1; ++ } ++ send_info->length = size; ++} ++ ++/* Multiplexer command packets functions */ ++ ++/* Turns on the ts0710 flow control */ ++ ++static int ts0710_fcon_msg(ts0710_con * ts0710, __u8 cr) ++{ ++ __u8 buf[30]; ++ mcc_short_frame *mcc_pkt; ++ short_frame *uih_pkt; ++ __u32 size; ++ ++ size = sizeof(short_frame) + sizeof(mcc_short_frame) + FCS_SIZE; ++ uih_pkt = (short_frame *) (buf + 1); ++ set_uih_hdr(uih_pkt, CTRL_CHAN, sizeof(mcc_short_frame), ++ ts0710->initiator); ++ uih_pkt->data[sizeof(mcc_short_frame)] = ++ crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK); ++ mcc_pkt = (mcc_short_frame *) (uih_pkt->data); ++ ++ mcc_pkt->h.type.ea = EA; ++ mcc_pkt->h.type.cr = cr; ++ mcc_pkt->h.type.type = FCON; ++ mcc_pkt->h.length.ea = EA; ++ mcc_pkt->h.length.len = 0; ++ ++ return basic_write(ts0710, buf, size); ++} ++ ++/* Turns off the ts0710 flow control */ ++ ++static int ts0710_fcoff_msg(ts0710_con * ts0710, __u8 cr) ++{ ++ __u8 buf[30]; ++ mcc_short_frame *mcc_pkt; ++ short_frame *uih_pkt; ++ __u32 size; ++ ++ size = (sizeof(short_frame) + sizeof(mcc_short_frame) + FCS_SIZE); ++ uih_pkt = (short_frame *) (buf + 1); ++ set_uih_hdr(uih_pkt, CTRL_CHAN, sizeof(mcc_short_frame), ++ ts0710->initiator); ++ uih_pkt->data[sizeof(mcc_short_frame)] = ++ crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK); ++ mcc_pkt = (mcc_short_frame *) (uih_pkt->data); ++ ++ mcc_pkt->h.type.ea = 1; ++ mcc_pkt->h.type.cr = cr; ++ mcc_pkt->h.type.type = FCOFF; ++ mcc_pkt->h.length.ea = 1; ++ mcc_pkt->h.length.len = 0; ++ ++ return basic_write(ts0710, buf, size); ++} ++ ++/* ++static int ts0710_rpn_msg(ts0710_con *ts0710, __u8 cr, __u8 dlci, __u8 req) ++{ ++ char buf[100]; ++ rpn_msg* rpn_pkt; ++ __u32 fsize; ++ __u32 psize; ++ ++ fsize = sizeof(rpn_msg); ++ ++ if (req) { ++ fsize -= sizeof(rpn_values); ++ } ++ ++ psize = (fsize - sizeof(short_frame) - FCS_SIZE); ++ ++ rpn_pkt = (rpn_msg *) buf; ++ ++ set_uih_hdr((short_frame *) rpn_pkt, CTRL_CHAN, psize, ts0710->initiator); ++ ++ rpn_pkt->fcs = crc_calc((__u8*) rpn_pkt, SHORT_CRC_CHECK); ++ ++ rpn_pkt->mcc_s_head.type.ea = EA; ++ rpn_pkt->mcc_s_head.type.cr = cr; ++ rpn_pkt->mcc_s_head.type.type = RPN; ++ rpn_pkt->mcc_s_head.length.ea = EA; ++ ++ rpn_pkt->dlci.ea = EA; ++ rpn_pkt->dlci.cr = 1; ++ rpn_pkt->dlci.d = dlci & 1; ++ rpn_pkt->dlci.server_chn = (dlci >> 1); ++ ++ if (req) { ++ rpn_pkt->mcc_s_head.length.len = 1; ++ rpn_pkt->rpn_val.bit_rate = rpn_pkt->fcs; ++ } else { ++ rpn_pkt->mcc_s_head.length.len = 8; ++ memcpy(&(rpn_pkt->rpn_val), &rpn_val, sizeof(rpn_values)); ++ } ++ return basic_write(ts0710, buf, fsize); ++} ++*/ ++/* ++static int ts0710_rls_msg(ts0710_con *ts0710, __u8 cr, __u8 dlci, __u8 err_code) ++{ ++ char buf[100]; ++ rls_msg *rls_pkt; ++ __u32 fsize; ++ __u32 psize; ++ ++ fsize = sizeof(rls_msg); ++ psize = fsize - sizeof(short_frame) - FCS_SIZE; ++ rls_pkt = (rls_msg *) buf; ++ ++ set_uih_hdr((short_frame *) rls_pkt, CTRL_CHAN, psize, ts0710->initiator); ++ rls_pkt->fcs = crc_calc((__u8*) rls_pkt, SHORT_CRC_CHECK); ++ ++ rls_pkt->mcc_s_head.type.ea = EA; ++ rls_pkt->mcc_s_head.type.cr = cr; ++ rls_pkt->mcc_s_head.type.type = RLS; ++ rls_pkt->mcc_s_head.length.ea = EA; ++ rls_pkt->mcc_s_head.length.len = 2; ++ ++ rls_pkt->dlci.ea = EA; ++ rls_pkt->dlci.cr = 1; ++ rls_pkt->dlci.d = dlci & 1; ++ rls_pkt->dlci.server_chn = dlci >> 1; ++ rls_pkt->error = err_code; ++ rls_pkt->res = 0; ++ ++ return basic_write(ts0710, buf, fsize); ++} ++*/ ++ ++/* Sends an PN-messages and sets the not negotiable parameters to their ++ default values in ts0710 */ ++ ++static int send_pn_msg(ts0710_con * ts0710, __u8 prior, __u32 frame_size, ++ __u8 credit_flow, __u8 credits, __u8 dlci, __u8 cr) ++{ ++ __u8 buf[30]; ++ pn_msg *pn_pkt; ++ __u32 size; ++ TS0710_DEBUG ++ ("send_pn_msg: DLCI 0x%02x, prior:0x%02x, frame_size:%d, credit_flow:%x, credits:%d, cr:%x\n", ++ dlci, prior, frame_size, credit_flow, credits, cr); ++ ++ size = sizeof(pn_msg); ++ pn_pkt = (pn_msg *) (buf + 1); ++ ++ set_uih_hdr((void *)pn_pkt, CTRL_CHAN, ++ size - (sizeof(short_frame) + FCS_SIZE), ts0710->initiator); ++ pn_pkt->fcs = crc_calc((__u8 *) pn_pkt, SHORT_CRC_CHECK); ++ ++ pn_pkt->mcc_s_head.type.ea = 1; ++ pn_pkt->mcc_s_head.type.cr = cr; ++ pn_pkt->mcc_s_head.type.type = PN; ++ pn_pkt->mcc_s_head.length.ea = 1; ++ pn_pkt->mcc_s_head.length.len = 8; ++ ++ pn_pkt->res1 = 0; ++ pn_pkt->res2 = 0; ++ pn_pkt->dlci = dlci; ++ pn_pkt->frame_type = 0; ++ pn_pkt->credit_flow = credit_flow; ++ pn_pkt->prior = prior; ++ pn_pkt->ack_timer = 0; ++ SET_PN_MSG_FRAME_SIZE(pn_pkt, frame_size); ++ pn_pkt->credits = credits; ++ pn_pkt->max_nbrof_retrans = 0; ++ ++ return basic_write(ts0710, buf, size); ++} ++ ++/* Send a Not supported command - command, which needs 3 bytes */ ++ ++static int send_nsc_msg(ts0710_con * ts0710, mcc_type cmd, __u8 cr) ++{ ++ __u8 buf[30]; ++ nsc_msg *nsc_pkt; ++ __u32 size; ++ ++ size = sizeof(nsc_msg); ++ nsc_pkt = (nsc_msg *) (buf + 1); ++ ++ set_uih_hdr((void *)nsc_pkt, CTRL_CHAN, ++ sizeof(nsc_msg) - sizeof(short_frame) - FCS_SIZE, ++ ts0710->initiator); ++ ++ nsc_pkt->fcs = crc_calc((__u8 *) nsc_pkt, SHORT_CRC_CHECK); ++ ++ nsc_pkt->mcc_s_head.type.ea = 1; ++ nsc_pkt->mcc_s_head.type.cr = cr; ++ nsc_pkt->mcc_s_head.type.type = NSC; ++ nsc_pkt->mcc_s_head.length.ea = 1; ++ nsc_pkt->mcc_s_head.length.len = 1; ++ ++ nsc_pkt->command_type.ea = 1; ++ nsc_pkt->command_type.cr = cmd.cr; ++ nsc_pkt->command_type.type = cmd.type; ++ ++ return basic_write(ts0710, buf, size); ++} ++ ++static int ts0710_msc_msg(ts0710_con * ts0710, __u8 value, __u8 cr, __u8 dlci) ++{ ++ __u8 buf[30]; ++ msc_msg *msc_pkt; ++ __u32 size; ++ ++ size = sizeof(msc_msg); ++ msc_pkt = (msc_msg *) (buf + 1); ++ ++ set_uih_hdr((void *)msc_pkt, CTRL_CHAN, ++ sizeof(msc_msg) - sizeof(short_frame) - FCS_SIZE, ++ ts0710->initiator); ++ ++ msc_pkt->fcs = crc_calc((__u8 *) msc_pkt, SHORT_CRC_CHECK); ++ ++ msc_pkt->mcc_s_head.type.ea = 1; ++ msc_pkt->mcc_s_head.type.cr = cr; ++ msc_pkt->mcc_s_head.type.type = MSC; ++ msc_pkt->mcc_s_head.length.ea = 1; ++ msc_pkt->mcc_s_head.length.len = 2; ++ ++ msc_pkt->dlci.ea = 1; ++ msc_pkt->dlci.cr = 1; ++ msc_pkt->dlci.d = dlci & 1; ++ msc_pkt->dlci.server_chn = (dlci >> 1) & 0x1f; ++ ++ msc_pkt->v24_sigs = value; ++ ++ return basic_write(ts0710, buf, size); ++} ++ ++static int ts0710_test_msg(ts0710_con * ts0710, __u8 * test_pattern, __u32 len, ++ __u8 cr, __u8 * f_buf /*Frame buf */ ) ++{ ++ __u32 size; ++ ++ if (len > SHORT_PAYLOAD_SIZE) { ++ long_frame *uih_pkt; ++ mcc_long_frame *mcc_pkt; ++ ++ size = ++ (sizeof(long_frame) + sizeof(mcc_long_frame) + len + ++ FCS_SIZE); ++ uih_pkt = (long_frame *) (f_buf + 1); ++ ++ set_uih_hdr((short_frame *) uih_pkt, CTRL_CHAN, len + ++ sizeof(mcc_long_frame), ts0710->initiator); ++ uih_pkt->data[GET_LONG_LENGTH(uih_pkt->h.length)] = ++ crc_calc((__u8 *) uih_pkt, LONG_CRC_CHECK); ++ mcc_pkt = (mcc_long_frame *) uih_pkt->data; ++ ++ mcc_pkt->h.type.ea = EA; ++ /* cr tells whether it is a commmand (1) or a response (0) */ ++ mcc_pkt->h.type.cr = cr; ++ mcc_pkt->h.type.type = TEST; ++ SET_LONG_LENGTH(mcc_pkt->h.length, len); ++ memcpy(mcc_pkt->value, test_pattern, len); ++ } else if (len > (SHORT_PAYLOAD_SIZE - sizeof(mcc_short_frame))) { ++ long_frame *uih_pkt; ++ mcc_short_frame *mcc_pkt; ++ ++ /* Create long uih packet and short mcc packet */ ++ size = ++ (sizeof(long_frame) + sizeof(mcc_short_frame) + len + ++ FCS_SIZE); ++ uih_pkt = (long_frame *) (f_buf + 1); ++ ++ set_uih_hdr((short_frame *) uih_pkt, CTRL_CHAN, ++ len + sizeof(mcc_short_frame), ts0710->initiator); ++ uih_pkt->data[GET_LONG_LENGTH(uih_pkt->h.length)] = ++ crc_calc((__u8 *) uih_pkt, LONG_CRC_CHECK); ++ mcc_pkt = (mcc_short_frame *) uih_pkt->data; ++ ++ mcc_pkt->h.type.ea = EA; ++ mcc_pkt->h.type.cr = cr; ++ mcc_pkt->h.type.type = TEST; ++ mcc_pkt->h.length.ea = EA; ++ mcc_pkt->h.length.len = len; ++ memcpy(mcc_pkt->value, test_pattern, len); ++ } else { ++ short_frame *uih_pkt; ++ mcc_short_frame *mcc_pkt; ++ ++ size = ++ (sizeof(short_frame) + sizeof(mcc_short_frame) + len + ++ FCS_SIZE); ++ uih_pkt = (short_frame *) (f_buf + 1); ++ ++ set_uih_hdr((void *)uih_pkt, CTRL_CHAN, len ++ + sizeof(mcc_short_frame), ts0710->initiator); ++ uih_pkt->data[uih_pkt->h.length.len] = ++ crc_calc((__u8 *) uih_pkt, SHORT_CRC_CHECK); ++ mcc_pkt = (mcc_short_frame *) uih_pkt->data; ++ ++ mcc_pkt->h.type.ea = EA; ++ mcc_pkt->h.type.cr = cr; ++ mcc_pkt->h.type.type = TEST; ++ mcc_pkt->h.length.ea = EA; ++ mcc_pkt->h.length.len = len; ++ memcpy(mcc_pkt->value, test_pattern, len); ++ ++ } ++ return basic_write(ts0710, f_buf, size); ++} ++ ++static void set_uih_hdr(short_frame * uih_pkt, __u8 dlci, __u32 len, __u8 cr) ++{ ++ uih_pkt->h.addr.ea = 1; ++ uih_pkt->h.addr.cr = cr; ++ uih_pkt->h.addr.d = dlci & 0x1; ++ uih_pkt->h.addr.server_chn = dlci >> 1; ++ uih_pkt->h.control = CLR_PF(UIH); ++ ++ if (len > SHORT_PAYLOAD_SIZE) { ++ SET_LONG_LENGTH(((long_frame *) uih_pkt)->h.length, len); ++ } else { ++ uih_pkt->h.length.ea = 1; ++ uih_pkt->h.length.len = len; ++ } ++} ++ ++/* Parses a multiplexer control channel packet */ ++ ++void process_mcc(__u8 * data, __u32 len, ts0710_con * ts0710, int longpkt) ++{ ++ __u8 *tbuf = NULL; ++ mcc_short_frame *mcc_short_pkt; ++ int j; ++ ++ if (longpkt) { ++ mcc_short_pkt = ++ (mcc_short_frame *) (((long_frame *) data)->data); ++ } else { ++ mcc_short_pkt = ++ (mcc_short_frame *) (((short_frame *) data)->data); ++ } ++ ++ switch (mcc_short_pkt->h.type.type) { ++ case TEST: ++ if (mcc_short_pkt->h.type.cr == MCC_RSP) { ++ TS0710_DEBUG("Received test command response\n"); ++ ++ if (ts0710->be_testing) { ++ if ((mcc_short_pkt->h.length.ea) == 0) { ++ mcc_long_frame *mcc_long_pkt; ++ mcc_long_pkt = ++ (mcc_long_frame *) mcc_short_pkt; ++ if (GET_LONG_LENGTH ++ (mcc_long_pkt->h.length) != ++ TEST_PATTERN_SIZE) { ++ ts0710->test_errs = ++ TEST_PATTERN_SIZE; ++ TS0710_DEBUG ++ ("Err: received test pattern is %d bytes long, not expected %d\n", ++ GET_LONG_LENGTH ++ (mcc_long_pkt->h.length), ++ TEST_PATTERN_SIZE); ++ } else { ++ ts0710->test_errs = 0; ++ for (j = 0; ++ j < TEST_PATTERN_SIZE; ++ j++) { ++ if (mcc_long_pkt-> ++ value[j] != ++ (j & 0xFF)) { ++ (ts0710-> ++ test_errs)++; ++ } ++ } ++ } ++ ++ } else { ++ ++#if TEST_PATTERN_SIZE < 128 ++ if (mcc_short_pkt->h.length.len != ++ TEST_PATTERN_SIZE) { ++#endif ++ ++ ts0710->test_errs = ++ TEST_PATTERN_SIZE; ++ TS0710_DEBUG ++ ("Err: received test pattern is %d bytes long, not expected %d\n", ++ mcc_short_pkt->h.length. ++ len, TEST_PATTERN_SIZE); ++ ++#if TEST_PATTERN_SIZE < 128 ++ } else { ++ ts0710->test_errs = 0; ++ for (j = 0; ++ j < TEST_PATTERN_SIZE; ++ j++) { ++ if (mcc_short_pkt-> ++ value[j] != ++ (j & 0xFF)) { ++ (ts0710-> ++ test_errs)++; ++ } ++ } ++ } ++#endif ++ ++ } ++ ++ ts0710->be_testing = 0; /* Clear the flag */ ++ wake_up_interruptible(&ts0710->test_wait); ++ } else { ++ TS0710_DEBUG ++ ("Err: shouldn't or late to get test cmd response\n"); ++ } ++ } else { ++ tbuf = (__u8 *) kmalloc(len + 32, GFP_ATOMIC); ++ if (!tbuf) { ++ break; ++ } ++ ++ if ((mcc_short_pkt->h.length.ea) == 0) { ++ mcc_long_frame *mcc_long_pkt; ++ mcc_long_pkt = (mcc_long_frame *) mcc_short_pkt; ++ ts0710_test_msg(ts0710, mcc_long_pkt->value, ++ GET_LONG_LENGTH(mcc_long_pkt->h. ++ length), ++ MCC_RSP, tbuf); ++ } else { ++ ts0710_test_msg(ts0710, mcc_short_pkt->value, ++ mcc_short_pkt->h.length.len, ++ MCC_RSP, tbuf); ++ } ++ ++ kfree(tbuf); ++ } ++ break; ++ ++ case FCON: /*Flow control on command */ ++ TS0710_PRINTK ++ ("MUX Received Flow control(all channels) on command\n"); ++ if (mcc_short_pkt->h.type.cr == MCC_CMD) { ++ ts0710->dlci[0].state = CONNECTED; ++ ts0710_fcon_msg(ts0710, MCC_RSP); ++ mux_sched_send(); ++ } ++ break; ++ ++ case FCOFF: /*Flow control off command */ ++ TS0710_PRINTK ++ ("MUX Received Flow control(all channels) off command\n"); ++ if (mcc_short_pkt->h.type.cr == MCC_CMD) { ++ for (j = 0; j < TS0710_MAX_CHN; j++) { ++ ts0710->dlci[j].state = FLOW_STOPPED; ++ } ++ ts0710_fcoff_msg(ts0710, MCC_RSP); ++ } ++ break; ++ ++ case MSC: /*Modem status command */ ++ { ++ __u8 dlci; ++ __u8 v24_sigs; ++ ++ dlci = (mcc_short_pkt->value[0]) >> 2; ++ v24_sigs = mcc_short_pkt->value[1]; ++ ++ if ((ts0710->dlci[dlci].state != CONNECTED) ++ && (ts0710->dlci[dlci].state != FLOW_STOPPED)) { ++ send_dm(ts0710, dlci); ++ break; ++ } ++ if (mcc_short_pkt->h.type.cr == MCC_CMD) { ++ TS0710_DEBUG("Received Modem status command\n"); ++ if (v24_sigs & 2) { ++ if (ts0710->dlci[dlci].state == ++ CONNECTED) { ++ TS0710_LOG ++ ("MUX Received Flow off on dlci %d\n", ++ dlci); ++ ts0710->dlci[dlci].state = ++ FLOW_STOPPED; ++ } ++ } else { ++ if (ts0710->dlci[dlci].state == ++ FLOW_STOPPED) { ++ ts0710->dlci[dlci].state = ++ CONNECTED; ++ TS0710_LOG ++ ("MUX Received Flow on on dlci %d\n", ++ dlci); ++ mux_sched_send(); ++ } ++ } ++ ++ ts0710_msc_msg(ts0710, v24_sigs, MCC_RSP, dlci); ++/* ++ if (!(ts0710->dlci[dlci].initiated) && !(ts0710->dlci[dlci].initiator)) { ++ ts0710_msc_msg(ts0710, EA | RTR | RTC | DV, MCC_CMD, dlci); ++ ts0710->dlci[dlci].initiated = 1; ++ } ++*/ ++ } else { ++ TS0710_DEBUG ++ ("Received Modem status response\n"); ++ ++ if (v24_sigs & 2) { ++ TS0710_DEBUG("Flow stop accepted\n"); ++ } ++ } ++ break; ++ } ++ ++ /* case RPN: *//*Remote port negotiation command */ ++ ++/* { ++ __u8 dlci; ++ ++ dlci = (mcc_short_pkt->value[0]) >> 2; ++ ++ if (mcc_short_pkt->h.type.cr == MCC_CMD) { ++ if (mcc_short_pkt->h.length.len == 1) { ++ TS0710_DEBUG("Received Remote port negotiation command\n"); ++ ts0710_rpn_msg(ts0710, MCC_RSP, dlci, 0); ++ } else { ++*/ ++ /* Accept the other sides settings (accept all for now) */ ++/* TS0710_DEBUG("Received Remote port negotiation respons\n"); ++ memcpy(&rpn_val, &mcc_short_pkt->value[1], 8); ++ ts0710_rpn_msg(ts0710, MCC_RSP, dlci, 0); ++*/ ++ /* Zero the parametermask after response */ ++/* memset(&rpn_val.pm, 0, 2); ++ } ++ } ++ break; ++ } ++*/ ++/* ++ case RLS: *//*Remote line status */ ++/* { ++ __u8 dlci; ++ __u8 err_code; ++ ++ TS0710_DEBUG("Received Remote line status\n"); ++ if (mcc_short_pkt->h.type.cr == MCC_CMD) { ++ dlci = mcc_short_pkt->value[0] >> 2; ++ err_code = mcc_short_pkt->value[1]; ++ ++ ts0710_rls_msg(ts0710, MCC_RSP, dlci, err_code); ++ } ++ break; ++ } ++*/ ++ case PN: /*DLC parameter negotiation */ ++ { ++ __u8 dlci; ++ __u16 frame_size; ++ pn_msg *pn_pkt; ++ ++ pn_pkt = (pn_msg *) data; ++ dlci = pn_pkt->dlci; ++ frame_size = GET_PN_MSG_FRAME_SIZE(pn_pkt); ++ TS0710_DEBUG ++ ("Received DLC parameter negotiation, PN\n"); ++ if (pn_pkt->mcc_s_head.type.cr == MCC_CMD) { ++ TS0710_DEBUG("received PN command with:\n"); ++ TS0710_DEBUG("Frame size:%d\n", frame_size); ++ ++ frame_size = ++ min(frame_size, ts0710->dlci[dlci].mtu); ++ send_pn_msg(ts0710, pn_pkt->prior, frame_size, ++ 0, 0, dlci, MCC_RSP); ++ ts0710->dlci[dlci].mtu = frame_size; ++ TS0710_DEBUG("process_mcc : mtu set to %d\n", ++ ts0710->dlci[dlci].mtu); ++ } else { ++ TS0710_DEBUG("received PN response with:\n"); ++ TS0710_DEBUG("Frame size:%d\n", frame_size); ++ ++ frame_size = ++ min(frame_size, ts0710->dlci[dlci].mtu); ++ ts0710->dlci[dlci].mtu = frame_size; ++ ++ TS0710_DEBUG ++ ("process_mcc : mtu set on dlci:%d to %d\n", ++ dlci, ts0710->dlci[dlci].mtu); ++ ++ if (ts0710->dlci[dlci].state == NEGOTIATING) { ++ ts0710->dlci[dlci].state = CONNECTING; ++ wake_up_interruptible(&ts0710-> ++ dlci[dlci]. ++ open_wait); ++ } ++ } ++ break; ++ } ++ ++ case NSC: /*Non supported command resonse */ ++ TS0710_LOG("MUX Received Non supported command response\n"); ++ break; ++ ++ default: /*Non supported command received */ ++ TS0710_LOG("MUX Received a non supported command\n"); ++ send_nsc_msg(ts0710, mcc_short_pkt->h.type, MCC_RSP); ++ break; ++ } ++} ++ ++static mux_recv_packet *get_mux_recv_packet(__u32 size) ++{ ++ mux_recv_packet *recv_packet; ++ ++ TS0710_DEBUG("Enter into get_mux_recv_packet"); ++ ++ recv_packet = ++ (mux_recv_packet *) kmalloc(sizeof(mux_recv_packet), GFP_ATOMIC); ++ if (!recv_packet) { ++ return 0; ++ } ++ ++ recv_packet->data = (__u8 *) kmalloc(size, GFP_ATOMIC); ++ if (!(recv_packet->data)) { ++ kfree(recv_packet); ++ return 0; ++ } ++ recv_packet->length = 0; ++ recv_packet->next = 0; ++ return recv_packet; ++} ++ ++static void free_mux_recv_packet(mux_recv_packet * recv_packet) ++{ ++ TS0710_DEBUG("Enter into free_mux_recv_packet"); ++ ++ if (!recv_packet) { ++ return; ++ } ++ ++ if (recv_packet->data) { ++ kfree(recv_packet->data); ++ } ++ kfree(recv_packet); ++} ++ ++static void free_mux_recv_struct(mux_recv_struct * recv_info) ++{ ++ mux_recv_packet *recv_packet1, *recv_packet2; ++ ++ if (!recv_info) { ++ return; ++ } ++ ++ recv_packet1 = recv_info->mux_packet; ++ while (recv_packet1) { ++ recv_packet2 = recv_packet1->next; ++ free_mux_recv_packet(recv_packet1); ++ recv_packet1 = recv_packet2; ++ } ++ ++ kfree(recv_info); ++} ++ ++static inline void add_post_recv_queue(mux_recv_struct ** head, ++ mux_recv_struct * new_item) ++{ ++ new_item->next = *head; ++ *head = new_item; ++} ++ ++static void ts0710_flow_on(__u8 dlci, ts0710_con * ts0710) ++{ ++ int i; ++ __u8 cmdtty; ++ __u8 datatty; ++ struct tty_struct *tty; ++ mux_recv_struct *recv_info; ++ ++ if ((ts0710->dlci[0].state != CONNECTED) ++ && (ts0710->dlci[0].state != FLOW_STOPPED)) { ++ return; ++ } else if ((ts0710->dlci[dlci].state != CONNECTED) ++ && (ts0710->dlci[dlci].state != FLOW_STOPPED)) { ++ return; ++ } ++ ++ if (!(ts0710->dlci[dlci].flow_control)) { ++ return; ++ } ++ ++ cmdtty = dlci2tty[dlci].cmdtty; ++ datatty = dlci2tty[dlci].datatty; ++ ++ if (cmdtty != datatty) { ++ /* Check AT cmd tty */ ++ tty = mux_table[cmdtty]; ++ if (mux_tty[cmdtty] && tty) { ++ if (test_bit(TTY_THROTTLED, &tty->flags)) { ++ return; ++ } ++ } ++ recv_info = mux_recv_info[cmdtty]; ++ if (mux_recv_info_flags[cmdtty] && recv_info) { ++ if (recv_info->total) { ++ return; ++ } ++ } ++ ++ /* Check data tty */ ++ tty = mux_table[datatty]; ++ if (mux_tty[datatty] && tty) { ++ if (test_bit(TTY_THROTTLED, &tty->flags)) { ++ return; ++ } ++ } ++ recv_info = mux_recv_info[datatty]; ++ if (mux_recv_info_flags[datatty] && recv_info) { ++ if (recv_info->total) { ++ return; ++ } ++ } ++ } ++ ++ for (i = 0; i < 3; i++) { ++ if (ts0710_msc_msg(ts0710, EA | RTC | RTR | DV, MCC_CMD, dlci) < ++ 0) { ++ continue; ++ } else { ++ TS0710_LOG("MUX send Flow on on dlci %d\n", dlci); ++ ts0710->dlci[dlci].flow_control = 0; ++ break; ++ } ++ } ++} ++ ++static void ts0710_flow_off(struct tty_struct *tty, __u8 dlci, ++ ts0710_con * ts0710) ++{ ++ int i; ++ ++ if (test_and_set_bit(TTY_THROTTLED, &tty->flags)) { ++ return; ++ } ++ ++ if ((ts0710->dlci[0].state != CONNECTED) ++ && (ts0710->dlci[0].state != FLOW_STOPPED)) { ++ return; ++ } else if ((ts0710->dlci[dlci].state != CONNECTED) ++ && (ts0710->dlci[dlci].state != FLOW_STOPPED)) { ++ return; ++ } ++ ++ if (ts0710->dlci[dlci].flow_control) { ++ return; ++ } ++ ++ for (i = 0; i < 3; i++) { ++ if (ts0710_msc_msg ++ (ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, dlci) < 0) { ++ continue; ++ } else { ++ TS0710_LOG("MUX send Flow off on dlci %d\n", dlci); ++ ts0710->dlci[dlci].flow_control = 1; ++ break; ++ } ++ } ++} ++ ++int ts0710_recv_data(ts0710_con * ts0710, char *data, int len) ++{ ++ short_frame *short_pkt; ++ long_frame *long_pkt; ++ __u8 *uih_data_start; ++ __u32 uih_len; ++ __u8 dlci; ++ __u8 be_connecting; ++#ifdef TS0710DEBUG ++ unsigned long t; ++#endif ++ ++ short_pkt = (short_frame *) data; ++ ++ dlci = short_pkt->h.addr.server_chn << 1 | short_pkt->h.addr.d; ++ switch (CLR_PF(short_pkt->h.control)) { ++ case SABM: ++ TS0710_DEBUG("SABM-packet received\n"); ++ ++/*For BP UART problem ++ if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) ) ++ break; ++*/ ++ ++ if (!dlci) { ++ TS0710_DEBUG("server channel == 0\n"); ++ ts0710->dlci[0].state = CONNECTED; ++ ++ TS0710_DEBUG("sending back UA - control channel\n"); ++ send_ua(ts0710, dlci); ++ wake_up_interruptible(&ts0710->dlci[0].open_wait); ++ ++ } else if (valid_dlci(dlci)) { ++ ++ TS0710_DEBUG("Incomming connect on channel %d\n", dlci); ++ ++ TS0710_DEBUG("sending UA, dlci %d\n", dlci); ++ send_ua(ts0710, dlci); ++ ++ ts0710->dlci[dlci].state = CONNECTED; ++ wake_up_interruptible(&ts0710->dlci[dlci].open_wait); ++ ++ } else { ++ TS0710_DEBUG("invalid dlci %d, sending DM\n", dlci); ++ send_dm(ts0710, dlci); ++ } ++ ++ break; ++ ++ case UA: ++ TS0710_DEBUG("UA packet received\n"); ++ ++/*For BP UART problem ++ if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) ) ++ break; ++*/ ++ ++ if (!dlci) { ++ TS0710_DEBUG("server channel == 0\n"); ++ ++ if (ts0710->dlci[0].state == CONNECTING) { ++ ts0710->dlci[0].state = CONNECTED; ++ wake_up_interruptible(&ts0710->dlci[0]. ++ open_wait); ++ } else if (ts0710->dlci[0].state == DISCONNECTING) { ++ ts0710_upon_disconnect(); ++ } else { ++ TS0710_DEBUG ++ (" Something wrong receiving UA packet\n"); ++ } ++ } else if (valid_dlci(dlci)) { ++ TS0710_DEBUG("Incomming UA on channel %d\n", dlci); ++ ++ if (ts0710->dlci[dlci].state == CONNECTING) { ++ ts0710->dlci[dlci].state = CONNECTED; ++ wake_up_interruptible(&ts0710->dlci[dlci]. ++ open_wait); ++ } else if (ts0710->dlci[dlci].state == DISCONNECTING) { ++ ts0710->dlci[dlci].state = DISCONNECTED; ++ wake_up_interruptible(&ts0710->dlci[dlci]. ++ open_wait); ++ wake_up_interruptible(&ts0710->dlci[dlci]. ++ close_wait); ++ ts0710_reset_dlci(dlci); ++ } else { ++ TS0710_DEBUG ++ (" Something wrong receiving UA packet\n"); ++ } ++ } else { ++ TS0710_DEBUG("invalid dlci %d\n", dlci); ++ } ++ ++ break; ++ ++ case DM: ++ TS0710_DEBUG("DM packet received\n"); ++ ++/*For BP UART problem ++ if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) ) ++ break; ++*/ ++ ++ if (!dlci) { ++ TS0710_DEBUG("server channel == 0\n"); ++ ++ if (ts0710->dlci[0].state == CONNECTING) { ++ be_connecting = 1; ++ } else { ++ be_connecting = 0; ++ } ++ ts0710_upon_disconnect(); ++ if (be_connecting) { ++ ts0710->dlci[0].state = REJECTED; ++ } ++ } else if (valid_dlci(dlci)) { ++ TS0710_DEBUG("Incomming DM on channel %d\n", dlci); ++ ++ if (ts0710->dlci[dlci].state == CONNECTING) { ++ ts0710->dlci[dlci].state = REJECTED; ++ } else { ++ ts0710->dlci[dlci].state = DISCONNECTED; ++ } ++ wake_up_interruptible(&ts0710->dlci[dlci].open_wait); ++ wake_up_interruptible(&ts0710->dlci[dlci].close_wait); ++ ts0710_reset_dlci(dlci); ++ } else { ++ TS0710_DEBUG("invalid dlci %d\n", dlci); ++ } ++ ++ break; ++ ++ case DISC: ++ TS0710_DEBUG("DISC packet received\n"); ++ ++/*For BP UART problem ++ if( crc_check((__u8*) short_pkt, SHORT_CRC_CHECK, short_pkt->data[0]) ) ++ break; ++*/ ++ ++ if (!dlci) { ++ TS0710_DEBUG("server channel == 0\n"); ++ ++ send_ua(ts0710, dlci); ++ TS0710_DEBUG("DISC, sending back UA\n"); ++ ++ ts0710_upon_disconnect(); ++ } else if (valid_dlci(dlci)) { ++ TS0710_DEBUG("Incomming DISC on channel %d\n", dlci); ++ ++ send_ua(ts0710, dlci); ++ TS0710_DEBUG("DISC, sending back UA\n"); ++ ++ ts0710->dlci[dlci].state = DISCONNECTED; ++ wake_up_interruptible(&ts0710->dlci[dlci].open_wait); ++ wake_up_interruptible(&ts0710->dlci[dlci].close_wait); ++ ts0710_reset_dlci(dlci); ++ } else { ++ TS0710_DEBUG("invalid dlci %d\n", dlci); ++ } ++ ++ break; ++ ++ case UIH: ++ TS0710_DEBUG("UIH packet received\n"); ++ ++ if ((dlci >= TS0710_MAX_CHN)) { ++ TS0710_DEBUG("invalid dlci %d\n", dlci); ++ send_dm(ts0710, dlci); ++ break; ++ } ++ ++ if (GET_PF(short_pkt->h.control)) { ++ TS0710_LOG ++ ("MUX Error %s: UIH packet with P/F set, discard it!\n", ++ __FUNCTION__); ++ break; ++ } ++ ++ if ((ts0710->dlci[dlci].state != CONNECTED) ++ && (ts0710->dlci[dlci].state != FLOW_STOPPED)) { ++ TS0710_LOG ++ ("MUX Error %s: DLCI %d not connected, discard it!\n", ++ __FUNCTION__, dlci); ++ send_dm(ts0710, dlci); ++ break; ++ } ++ ++ if ((short_pkt->h.length.ea) == 0) { ++ TS0710_DEBUG("Long UIH packet received\n"); ++ long_pkt = (long_frame *) data; ++ uih_len = GET_LONG_LENGTH(long_pkt->h.length); ++ uih_data_start = long_pkt->h.data; ++ TS0710_DEBUG("long packet length %d\n", uih_len); ++ ++/*For BP UART problem ++ if (crc_check(data, LONG_CRC_CHECK, *(uih_data_start + uih_len))) ++ break; ++*/ ++ } else { ++ TS0710_DEBUG("Short UIH pkt received\n"); ++ uih_len = short_pkt->h.length.len; ++ uih_data_start = short_pkt->data; ++ ++/*For BP UART problem ++ if (crc_check(data, SHORT_CRC_CHECK, *(uih_data_start + uih_len))) ++ break; ++*/ ++ } ++ ++ if (dlci == 0) { ++ TS0710_DEBUG("UIH on serv_channel 0\n"); ++ process_mcc(data, len, ts0710, ++ !(short_pkt->h.length.ea)); ++ } else if (valid_dlci(dlci)) { ++ /* do tty dispatch */ ++ __u8 tag; ++ __u8 tty_idx; ++ struct tty_struct *tty; ++ __u8 queue_data; ++ __u8 post_recv; ++ __u8 flow_control; ++ mux_recv_struct *recv_info; ++ int recv_room; ++ mux_recv_packet *recv_packet, *recv_packet2; ++ ++ TS0710_DEBUG("UIH on channel %d\n", dlci); ++ ++ if (uih_len > ts0710->dlci[dlci].mtu) { ++ TS0710_PRINTK ++ ("MUX Error: DLCI:%d, uih_len:%d is bigger than mtu:%d, discard data!\n", ++ dlci, uih_len, ts0710->dlci[dlci].mtu); ++ break; ++ } ++ ++ tag = *uih_data_start; ++ uih_data_start++; ++ uih_len--; ++ ++ if (!uih_len) { ++ break; ++ } ++ ++ switch (tag) { ++ case CMDTAG: ++ tty_idx = dlci2tty[dlci].cmdtty; ++ TS0710_DEBUG("CMDTAG on DLCI:%d, /dev/mux%d\n", ++ dlci, tty_idx); ++ TS0710_DEBUGSTR(uih_data_start, uih_len); ++ if (!(iscmdtty[tty_idx])) { ++ TS0710_PRINTK ++ ("MUX Error: %s: Wrong CMDTAG on DLCI:%d, /dev/mux%d\n", ++ __FUNCTION__, dlci, tty_idx); ++ } ++ break; ++ case DATATAG: ++ default: ++ tty_idx = dlci2tty[dlci].datatty; ++ TS0710_DEBUG ++ ("NON-CMDTAG on DLCI:%d, /dev/mux%d\n", ++ dlci, tty_idx); ++ if (iscmdtty[tty_idx]) { ++ TS0710_PRINTK ++ ("MUX Error: %s: Wrong NON-CMDTAG on DLCI:%d, /dev/mux%d\n", ++ __FUNCTION__, dlci, tty_idx); ++ } ++ break; ++ } ++ tty = mux_table[tty_idx]; ++ if ((!mux_tty[tty_idx]) || (!tty)) { ++ TS0710_PRINTK ++ ("MUX: No application waiting for, discard it! /dev/mux%d\n", ++ tty_idx); ++ } else { /* Begin processing received data */ ++ if ((!mux_recv_info_flags[tty_idx]) ++ || (!mux_recv_info[tty_idx])) { ++ TS0710_PRINTK ++ ("MUX Error: No mux_recv_info, discard it! /dev/mux%d\n", ++ tty_idx); ++ break; ++ } ++ ++ recv_info = mux_recv_info[tty_idx]; ++ if (recv_info->total > 8192) { ++ TS0710_PRINTK ++ ("MUX : discard data for tty_idx:%d, recv_info->total > 8192 \n", ++ tty_idx); ++ break; ++ } ++ ++ queue_data = 0; ++ post_recv = 0; ++ flow_control = 0; ++ recv_room = 65535; ++ if (tty->receive_room) ++ recv_room = tty->receive_room; ++ ++ if (test_bit(TTY_THROTTLED, &tty->flags)) { ++ queue_data = 1; ++ } else { ++ if (test_bit ++ (TTY_DONT_FLIP, &tty->flags)) { ++ queue_data = 1; ++ post_recv = 1; ++ } else if (recv_info->total) { ++ queue_data = 1; ++ post_recv = 1; ++ } else if (recv_room < uih_len) { ++ queue_data = 1; ++ flow_control = 1; ++ } ++ ++ if ((recv_room - ++ (uih_len + recv_info->total)) < ++ ts0710->dlci[dlci].mtu) { ++ flow_control = 1; ++ } ++ } ++ ++ if (!queue_data) { ++ /* Put received data into read buffer of tty */ ++ TS0710_DEBUG ++ ("Put received data into read buffer of /dev/mux%d", ++ tty_idx); ++ ++#ifdef TS0710DEBUG ++ t = jiffies; ++#endif ++ ++ (tty->ldisc.receive_buf) (tty, ++ uih_data_start, ++ NULL, ++ uih_len); ++ ++#ifdef TS0710DEBUG ++ TS0710_DEBUG ++ ("tty->ldisc.receive_buf take ticks: %lu", ++ (jiffies - t)); ++#endif ++ ++ } else { /* Queue data */ ++ ++ TS0710_DEBUG ++ ("Put received data into recv queue of /dev/mux%d", ++ tty_idx); ++ if (recv_info->total) { ++ /* recv_info is already linked into mux_recv_queue */ ++ ++ recv_packet = ++ get_mux_recv_packet ++ (uih_len); ++ if (!recv_packet) { ++ TS0710_PRINTK ++ ("MUX %s: no memory\n", ++ __FUNCTION__); ++ break; ++ } ++ ++ memcpy(recv_packet->data, ++ uih_data_start, uih_len); ++ recv_packet->length = uih_len; ++ recv_info->total += uih_len; ++ recv_packet->next = NULL; ++ ++ if (!(recv_info->mux_packet)) { ++ recv_info->mux_packet = ++ recv_packet; ++ } else { ++ recv_packet2 = ++ recv_info-> ++ mux_packet; ++ while (recv_packet2-> ++ next) { ++ recv_packet2 = ++ recv_packet2-> ++ next; ++ } ++ recv_packet2->next = ++ recv_packet; ++ } /* End if( !(recv_info->mux_packet) ) */ ++ } else { /* recv_info->total == 0 */ ++ if (uih_len > ++ TS0710MUX_RECV_BUF_SIZE) { ++ TS0710_PRINTK ++ ("MUX Error: tty_idx:%d, uih_len == %d is too big\n", ++ tty_idx, uih_len); ++ uih_len = ++ TS0710MUX_RECV_BUF_SIZE; ++ } ++ memcpy(recv_info->data, ++ uih_data_start, uih_len); ++ recv_info->length = uih_len; ++ recv_info->total = uih_len; ++ ++ add_post_recv_queue ++ (&mux_recv_queue, ++ recv_info); ++ } /* End recv_info->total == 0 */ ++ } /* End Queue data */ ++ ++ if (flow_control) { ++ /* Do something for flow control */ ++ ts0710_flow_off(tty, dlci, ts0710); ++ } ++ ++ if (tty_idx == ++ dlci2tty[TS0710MUX_GPRS1_DLCI].datatty) { ++ if (add_count ++ (TS0710MUX_GPRS1_RECV_COUNT_IDX, ++ uih_len) < 0) { ++ post_recv_count_flag = 1; ++ post_recv = 1; ++ mux_data_count2 ++ [TS0710MUX_GPRS1_RECV_COUNT_IDX] ++ += uih_len; ++ } ++ } else if (tty_idx == ++ dlci2tty[TS0710MUX_GPRS2_DLCI]. ++ datatty) { ++ if (add_count ++ (TS0710MUX_GPRS2_RECV_COUNT_IDX, ++ uih_len) < 0) { ++ post_recv_count_flag = 1; ++ post_recv = 1; ++ mux_data_count2 ++ [TS0710MUX_GPRS2_RECV_COUNT_IDX] ++ += uih_len; ++ } ++ } ++ ++ if (post_recv) ++ schedule_work(&post_recv_tqueue); ++ } /* End processing received data */ ++ } else { ++ TS0710_DEBUG("invalid dlci %d\n", dlci); ++ } ++ ++ break; ++ ++ default: ++ TS0710_DEBUG("illegal packet\n"); ++ break; ++ } ++ return 0; ++} ++ ++/* ++int ts0710_send_data(ts0710_con *ts0710, __u8 dlci, __u8 *data, __u32 count) ++{ ++ __u32 c, total = 0; ++ __u8 tag, first; ++ ++ if( ts0710->dlci[0].state == FLOW_STOPPED ){ ++ TS0710_DEBUG("Flow stopped on all channels, returning zero\n"); ++*/ ++/* ++ return -EFLOWSTOPPED; ++ } else if( ts0710->dlci[dlci].state == FLOW_STOPPED ){ ++ TS0710_DEBUG("Flow stopped, returning zero\n"); ++*/ ++/* ++ return -EFLOWSTOPPED; ++ } else if( ts0710->dlci[dlci].state == CONNECTED ){ ++ ++ TS0710_DEBUG("trying to send %d bytes\n", count); ++ tag = *data; ++ first = 1; ++*/ ++ /* The first byte is always a Cmd/Data tag */ ++/* ++ while( count > 1 ){ ++ ++ c = min(count, ts0710->dlci[dlci].mtu); ++ if( queue_uih(data, c, ts0710, dlci) <= 0 ) { ++ break; ++ } ++ ++ total += (c - 1); ++ data += (c - 1); ++ *data = tag; ++ count -= (c - 1); ++ ++ if( first ) { ++ first = 0; ++ total++; ++ } ++ } ++ TS0710_DEBUG("sent %d bytes\n", total); ++ return total; ++ } else { ++ TS0710_DEBUG("DLCI %d not connected\n", dlci); ++ return -EDISCONNECTED; ++ } ++} ++*/ ++ ++/* Close ts0710 channel */ ++static void ts0710_close_channel(__u8 dlci) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int try; ++ unsigned long t; ++ ++ TS0710_DEBUG("ts0710_disc_command on channel %d\n", dlci); ++ ++ if ((ts0710->dlci[dlci].state == DISCONNECTED) ++ || (ts0710->dlci[dlci].state == REJECTED)) { ++ return; ++ } else if (ts0710->dlci[dlci].state == DISCONNECTING) { ++ /* Reentry */ ++ return; ++ } else { ++ ts0710->dlci[dlci].state = DISCONNECTING; ++ try = 3; ++ while (try--) { ++ t = jiffies; ++ send_disc(ts0710, dlci); ++ interruptible_sleep_on_timeout(&ts0710->dlci[dlci]. ++ close_wait, ++ TS0710MUX_TIME_OUT); ++ if (ts0710->dlci[dlci].state == DISCONNECTED) { ++ break; ++ } else if (signal_pending(current)) { ++ TS0710_PRINTK ++ ("MUX DLCI %d Send DISC got signal!\n", ++ dlci); ++ break; ++ } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { ++ TS0710_PRINTK ++ ("MUX DLCI %d Send DISC timeout!\n", dlci); ++ continue; ++ } ++ } ++ ++ if (ts0710->dlci[dlci].state != DISCONNECTED) { ++ if (dlci == 0) { /* Control Channel */ ++ ts0710_upon_disconnect(); ++ } else { /* Other Channel */ ++ ts0710->dlci[dlci].state = DISCONNECTED; ++ wake_up_interruptible(&ts0710->dlci[dlci]. ++ close_wait); ++ ts0710_reset_dlci(dlci); ++ } ++ } ++ } ++} ++ ++int ts0710_open_channel(__u8 dlci) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int try; ++ int retval; ++ unsigned long t; ++ ++ retval = -ENODEV; ++ if (dlci == 0) { // control channel ++ if ((ts0710->dlci[0].state == CONNECTED) ++ || (ts0710->dlci[0].state == FLOW_STOPPED)) { ++ return 0; ++ } else if (ts0710->dlci[0].state == CONNECTING) { ++ /* Reentry */ ++ TS0710_PRINTK ++ ("MUX DLCI: 0, reentry to open DLCI 0, pid: %d, %s !\n", ++ current->pid, current->comm); ++ try = 11; ++ while (try--) { ++ t = jiffies; ++ interruptible_sleep_on_timeout(&ts0710->dlci[0]. ++ open_wait, ++ TS0710MUX_TIME_OUT); ++ if ((ts0710->dlci[0].state == CONNECTED) ++ || (ts0710->dlci[0].state == ++ FLOW_STOPPED)) { ++ retval = 0; ++ break; ++ } else if (ts0710->dlci[0].state == REJECTED) { ++ retval = -EREJECTED; ++ break; ++ } else if (ts0710->dlci[0].state == ++ DISCONNECTED) { ++ break; ++ } else if (signal_pending(current)) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Wait for connecting got signal!\n", ++ dlci); ++ retval = -EAGAIN; ++ break; ++ } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Wait for connecting timeout!\n", ++ dlci); ++ continue; ++ } else if (ts0710->dlci[0].state == CONNECTING) { ++ continue; ++ } ++ } ++ ++ if (ts0710->dlci[0].state == CONNECTING) { ++ ts0710->dlci[0].state = DISCONNECTED; ++ } ++ } else if ((ts0710->dlci[0].state != DISCONNECTED) ++ && (ts0710->dlci[0].state != REJECTED)) { ++ TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci); ++ return retval; ++ } else { ++ ts0710->initiator = 1; ++ ts0710->dlci[0].state = CONNECTING; ++ ts0710->dlci[0].initiator = 1; ++ try = 10; ++ while (try--) { ++ t = jiffies; ++ send_sabm(ts0710, 0); ++ interruptible_sleep_on_timeout(&ts0710->dlci[0]. ++ open_wait, ++ TS0710MUX_TIME_OUT); ++ if ((ts0710->dlci[0].state == CONNECTED) ++ || (ts0710->dlci[0].state == ++ FLOW_STOPPED)) { ++ retval = 0; ++ break; ++ } else if (ts0710->dlci[0].state == REJECTED) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send SABM got rejected!\n", ++ dlci); ++ retval = -EREJECTED; ++ break; ++ } else if (signal_pending(current)) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send SABM got signal!\n", ++ dlci); ++ retval = -EAGAIN; ++ break; ++ } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send SABM timeout!\n", ++ dlci); ++ continue; ++ } ++ } ++ ++ if (ts0710->dlci[0].state == CONNECTING) { ++ ts0710->dlci[0].state = DISCONNECTED; ++ } ++ wake_up_interruptible(&ts0710->dlci[0].open_wait); ++ } ++ } else { // other channel ++ if ((ts0710->dlci[0].state != CONNECTED) ++ && (ts0710->dlci[0].state != FLOW_STOPPED)) { ++ return retval; ++ } else if ((ts0710->dlci[dlci].state == CONNECTED) ++ || (ts0710->dlci[dlci].state == FLOW_STOPPED)) { ++ return 0; ++ } else if ((ts0710->dlci[dlci].state == NEGOTIATING) ++ || (ts0710->dlci[dlci].state == CONNECTING)) { ++ /* Reentry */ ++ try = 8; ++ while (try--) { ++ t = jiffies; ++ interruptible_sleep_on_timeout(&ts0710-> ++ dlci[dlci]. ++ open_wait, ++ TS0710MUX_TIME_OUT); ++ if ((ts0710->dlci[dlci].state == CONNECTED) ++ || (ts0710->dlci[dlci].state == ++ FLOW_STOPPED)) { ++ retval = 0; ++ break; ++ } else if (ts0710->dlci[dlci].state == REJECTED) { ++ retval = -EREJECTED; ++ break; ++ } else if (ts0710->dlci[dlci].state == ++ DISCONNECTED) { ++ break; ++ } else if (signal_pending(current)) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Wait for connecting got signal!\n", ++ dlci); ++ retval = -EAGAIN; ++ break; ++ } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Wait for connecting timeout!\n", ++ dlci); ++ continue; ++ } else ++ if ((ts0710->dlci[dlci].state == ++ NEGOTIATING) ++ || (ts0710->dlci[dlci].state == ++ CONNECTING)) { ++ continue; ++ } ++ } ++ ++ if ((ts0710->dlci[dlci].state == NEGOTIATING) ++ || (ts0710->dlci[dlci].state == CONNECTING)) { ++ ts0710->dlci[dlci].state = DISCONNECTED; ++ } ++ } else if ((ts0710->dlci[dlci].state != DISCONNECTED) ++ && (ts0710->dlci[dlci].state != REJECTED)) { ++ TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci); ++ return retval; ++ } else { ++ ts0710->dlci[dlci].state = NEGOTIATING; ++ ts0710->dlci[dlci].initiator = 1; ++ try = 3; ++ while (try--) { ++ t = jiffies; ++ send_pn_msg(ts0710, 7, ts0710->dlci[dlci].mtu, ++ 0, 0, dlci, 1); ++ interruptible_sleep_on_timeout(&ts0710-> ++ dlci[dlci]. ++ open_wait, ++ TS0710MUX_TIME_OUT); ++ if (ts0710->dlci[dlci].state == CONNECTING) { ++ break; ++ } else if (signal_pending(current)) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send pn_msg got signal!\n", ++ dlci); ++ retval = -EAGAIN; ++ break; ++ } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send pn_msg timeout!\n", ++ dlci); ++ continue; ++ } ++ } ++ ++ if (ts0710->dlci[dlci].state == CONNECTING) { ++ try = 3; ++ while (try--) { ++ t = jiffies; ++ send_sabm(ts0710, dlci); ++ interruptible_sleep_on_timeout(&ts0710-> ++ dlci ++ [dlci]. ++ open_wait, ++ TS0710MUX_TIME_OUT); ++ if ((ts0710->dlci[dlci].state == ++ CONNECTED) ++ || (ts0710->dlci[dlci].state == ++ FLOW_STOPPED)) { ++ retval = 0; ++ break; ++ } else if (ts0710->dlci[dlci].state == ++ REJECTED) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send SABM got rejected!\n", ++ dlci); ++ retval = -EREJECTED; ++ break; ++ } else if (signal_pending(current)) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send SABM got signal!\n", ++ dlci); ++ retval = -EAGAIN; ++ break; ++ } else if ((jiffies - t) >= ++ TS0710MUX_TIME_OUT) { ++ TS0710_PRINTK ++ ("MUX DLCI:%d Send SABM timeout!\n", ++ dlci); ++ continue; ++ } ++ } ++ } ++ ++ if ((ts0710->dlci[dlci].state == NEGOTIATING) ++ || (ts0710->dlci[dlci].state == CONNECTING)) { ++ ts0710->dlci[dlci].state = DISCONNECTED; ++ } ++ wake_up_interruptible(&ts0710->dlci[dlci].open_wait); ++ } ++ } ++ return retval; ++} ++ ++static int ts0710_exec_test_cmd(void) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ __u8 *f_buf; /* Frame buffer */ ++ __u8 *d_buf; /* Data buffer */ ++ int retval = -EFAULT; ++ int j; ++ unsigned long t; ++ ++ if (ts0710->be_testing) { ++ /* Reentry */ ++ t = jiffies; ++ interruptible_sleep_on_timeout(&ts0710->test_wait, ++ 3 * TS0710MUX_TIME_OUT); ++ if (ts0710->be_testing == 0) { ++ if (ts0710->test_errs == 0) { ++ retval = 0; ++ } else { ++ retval = -EFAULT; ++ } ++ } else if (signal_pending(current)) { ++ TS0710_DEBUG ++ ("Wait for Test_cmd response got signal!\n"); ++ retval = -EAGAIN; ++ } else if ((jiffies - t) >= 3 * TS0710MUX_TIME_OUT) { ++ TS0710_DEBUG("Wait for Test_cmd response timeout!\n"); ++ retval = -EFAULT; ++ } ++ } else { ++ ts0710->be_testing = 1; /* Set the flag */ ++ ++ f_buf = (__u8 *) kmalloc(TEST_PATTERN_SIZE + 32, GFP_KERNEL); ++ d_buf = (__u8 *) kmalloc(TEST_PATTERN_SIZE + 32, GFP_KERNEL); ++ if ((!f_buf) || (!d_buf)) { ++ if (f_buf) { ++ kfree(f_buf); ++ } ++ if (d_buf) { ++ kfree(d_buf); ++ } ++ ++ ts0710->be_testing = 0; /* Clear the flag */ ++ ts0710->test_errs = TEST_PATTERN_SIZE; ++ wake_up_interruptible(&ts0710->test_wait); ++ return -ENOMEM; ++ } ++ ++ for (j = 0; j < TEST_PATTERN_SIZE; j++) { ++ d_buf[j] = j & 0xFF; ++ } ++ ++ t = jiffies; ++ ts0710_test_msg(ts0710, d_buf, TEST_PATTERN_SIZE, MCC_CMD, ++ f_buf); ++ interruptible_sleep_on_timeout(&ts0710->test_wait, ++ 2 * TS0710MUX_TIME_OUT); ++ if (ts0710->be_testing == 0) { ++ if (ts0710->test_errs == 0) { ++ retval = 0; ++ } else { ++ retval = -EFAULT; ++ } ++ } else if (signal_pending(current)) { ++ TS0710_DEBUG("Send Test_cmd got signal!\n"); ++ retval = -EAGAIN; ++ } else if ((jiffies - t) >= 2 * TS0710MUX_TIME_OUT) { ++ TS0710_DEBUG("Send Test_cmd timeout!\n"); ++ ts0710->test_errs = TEST_PATTERN_SIZE; ++ retval = -EFAULT; ++ } ++ ++ ts0710->be_testing = 0; /* Clear the flag */ ++ wake_up_interruptible(&ts0710->test_wait); ++ ++ /* Release buffer */ ++ if (f_buf) { ++ kfree(f_buf); ++ } ++ if (d_buf) { ++ kfree(d_buf); ++ } ++ } ++ ++ return retval; ++} ++ ++static void mux_sched_send(void) ++{ ++ ++#ifdef USB_FOR_MUX ++ schedule_work(&send_tqueue); ++#else ++ if (!tq_serial_for_mux) { ++ TS0710_PRINTK("MUX Error: %s: tq_serial_for_mux == 0\n", ++ __FUNCTION__); ++ return; ++ } ++ schedule_work(&send_tqueue); ++ mark_bh(SERIAL_BH); ++#endif ++ ++} ++ ++/**************************** ++ * TTY driver routines ++*****************************/ ++ ++static void mux_close(struct tty_struct *tty, struct file *filp) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int line; ++ __u8 dlci; ++ __u8 cmdtty; ++ __u8 datatty; ++ ++ UNUSED_PARAM(filp); ++ ++ if (!tty) { ++ return; ++ } ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ return; ++ } ++ if (mux_tty[line] > 0) ++ mux_tty[line]--; ++ ++ dlci = tty2dlci[line]; ++ cmdtty = dlci2tty[dlci].cmdtty; ++ datatty = dlci2tty[dlci].datatty; ++ if ((mux_tty[cmdtty] == 0) && (mux_tty[datatty] == 0)) { ++ if (dlci == 1) { ++ ts0710_close_channel(0); ++ TS0710_PRINTK ++ ("MUX mux_close: tapisrv might be down!!! Close DLCI 1\n"); ++ TS0710_SIG2APLOGD(); ++ } ++ ts0710_close_channel(dlci); ++ } ++ ++ if (mux_tty[line] == 0) { ++ if ((mux_send_info_flags[line]) ++ && (mux_send_info[line]) ++ /*&& (mux_send_info[line]->filled == 0) */ ++ ) { ++ mux_send_info_flags[line] = 0; ++ kfree(mux_send_info[line]); ++ mux_send_info[line] = 0; ++ TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line); ++ } ++ ++ if ((mux_recv_info_flags[line]) ++ && (mux_recv_info[line]) ++ && (mux_recv_info[line]->total == 0)) { ++ mux_recv_info_flags[line] = 0; ++ free_mux_recv_struct(mux_recv_info[line]); ++ mux_recv_info[line] = 0; ++ TS0710_DEBUG("Free mux_recv_info for /dev/mux%d", line); ++ } ++ ++ ts0710_flow_on(dlci, ts0710); ++ schedule_work(&post_recv_tqueue); ++ ++ wake_up_interruptible(&tty->read_wait); ++ wake_up_interruptible(&tty->write_wait); ++ tty->packet = 0; ++ } ++} ++ ++static void mux_throttle(struct tty_struct *tty) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int line; ++ int i; ++ __u8 dlci; ++ ++ if (!tty) { ++ return; ++ } ++ ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ return; ++ } ++ ++ TS0710_DEBUG("Enter into %s, minor number is: %d\n", __FUNCTION__, ++ line); ++ ++ dlci = tty2dlci[line]; ++ if ((ts0710->dlci[0].state != CONNECTED) ++ && (ts0710->dlci[0].state != FLOW_STOPPED)) { ++ return; ++ } else if ((ts0710->dlci[dlci].state != CONNECTED) ++ && (ts0710->dlci[dlci].state != FLOW_STOPPED)) { ++ return; ++ } ++ ++ if (ts0710->dlci[dlci].flow_control) { ++ return; ++ } ++ ++ for (i = 0; i < 3; i++) { ++ if (ts0710_msc_msg ++ (ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, dlci) < 0) { ++ continue; ++ } else { ++ TS0710_LOG("MUX Send Flow off on dlci %d\n", dlci); ++ ts0710->dlci[dlci].flow_control = 1; ++ break; ++ } ++ } ++} ++ ++static void mux_unthrottle(struct tty_struct *tty) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int line; ++ __u8 dlci; ++ mux_recv_struct *recv_info; ++ ++ if (!tty) { ++ return; ++ } ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ return; ++ } ++ ++ if ((!mux_recv_info_flags[line]) || (!mux_recv_info[line])) { ++ return; ++ } ++ ++ TS0710_DEBUG("Enter into %s, minor number is: %d\n", __FUNCTION__, ++ line); ++ ++ recv_info = mux_recv_info[line]; ++ dlci = tty2dlci[line]; ++ ++ if (recv_info->total) { ++ recv_info->post_unthrottle = 1; ++ schedule_work(&post_recv_tqueue); ++ } else { ++ ts0710_flow_on(dlci, ts0710); ++ } ++} ++ ++static int mux_chars_in_buffer(struct tty_struct *tty) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int retval; ++ int line; ++ __u8 dlci; ++ mux_send_struct *send_info; ++ ++ retval = TS0710MUX_MAX_CHARS_IN_BUF; ++ if (!tty) { ++ goto out; ++ } ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ goto out; ++ } ++ ++ dlci = tty2dlci[line]; ++ if (ts0710->dlci[0].state == FLOW_STOPPED) { ++ TS0710_DEBUG ++ ("Flow stopped on all channels, returning MAX chars in buffer\n"); ++ goto out; ++ } else if (ts0710->dlci[dlci].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped, returning MAX chars in buffer\n"); ++ goto out; ++ } else if (ts0710->dlci[dlci].state != CONNECTED) { ++ TS0710_DEBUG("DLCI %d not connected\n", dlci); ++ goto out; ++ } ++ ++ if (!(mux_send_info_flags[line])) { ++ goto out; ++ } ++ send_info = mux_send_info[line]; ++ if (!send_info) { ++ goto out; ++ } ++ if (send_info->filled) { ++ goto out; ++ } ++ ++ retval = 0; ++ ++ out: ++ return retval; ++} ++ ++static int mux_chars_in_serial_buffer(struct tty_struct *tty) ++{ ++ UNUSED_PARAM(tty); ++ ++ if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) { ++ TS0710_PRINTK ++ ("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", ++ __FUNCTION__); ++ ++#ifndef USB_FOR_MUX ++ TS0710_PRINTK ++ ("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", ++ __FUNCTION__); ++ TS0710_SIG2APLOGD(); ++#endif ++ ++ return 0; ++ } ++ return COMM_FOR_MUX_DRIVER->chars_in_buffer(COMM_FOR_MUX_TTY); ++} ++ ++static int mux_write(struct tty_struct *tty, ++ const unsigned char *buf, int count) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int line; ++ __u8 dlci; ++ mux_send_struct *send_info; ++ __u8 *d_buf; ++ __u16 c; ++ __u8 post_recv; ++ ++ if (count <= 0) { ++ return 0; ++ } ++ ++ if (!tty) { ++ return 0; ++ } ++ ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) ++ return -ENODEV; ++ ++ dlci = tty2dlci[line]; ++ if (ts0710->dlci[0].state == FLOW_STOPPED) { ++ TS0710_DEBUG ++ ("Flow stopped on all channels, returning zero /dev/mux%d\n", ++ line); ++ return 0; ++ } else if (ts0710->dlci[dlci].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped, returning zero /dev/mux%d\n", line); ++ return 0; ++ } else if (ts0710->dlci[dlci].state == CONNECTED) { ++ ++ if (!(mux_send_info_flags[line])) { ++ TS0710_PRINTK ++ ("MUX Error: mux_write: mux_send_info_flags[%d] == 0\n", ++ line); ++ return -ENODEV; ++ } ++ send_info = mux_send_info[line]; ++ if (!send_info) { ++ TS0710_PRINTK ++ ("MUX Error: mux_write: mux_send_info[%d] == 0\n", ++ line); ++ return -ENODEV; ++ } ++ ++ c = min(count, (ts0710->dlci[dlci].mtu - 1)); ++ if (c <= 0) { ++ return 0; ++ } ++ ++ if (test_and_set_bit(BUF_BUSY, &send_info->flags)) ++ return 0; ++ ++ if (send_info->filled) { ++ clear_bit(BUF_BUSY, &send_info->flags); ++ return 0; ++ } ++ ++ d_buf = ((__u8 *) send_info->buf) + TS0710MUX_SEND_BUF_OFFSET; ++ memcpy(&d_buf[1], buf, c); ++ ++ TS0710_DEBUG("Prepare to send %d bytes from /dev/mux%d", c, ++ line); ++ if (iscmdtty[line]) { ++ TS0710_DEBUGSTR(&d_buf[1], c); ++ TS0710_DEBUG("CMDTAG"); ++ d_buf[0] = CMDTAG; ++ } else { ++ TS0710_DEBUG("DATATAG"); ++ d_buf[0] = DATATAG; ++ } ++ ++ TS0710_DEBUGHEX(d_buf, c + 1); ++ ++ send_info->frame = d_buf; ++ queue_uih(send_info, c + 1, ts0710, dlci); ++ send_info->filled = 1; ++ clear_bit(BUF_BUSY, &send_info->flags); ++ ++ post_recv = 0; ++ if (dlci == TS0710MUX_GPRS1_DLCI) { ++ if (add_count ++ (TS0710MUX_GPRS1_SEND_COUNT_IDX, c) < 0) { ++ post_recv_count_flag = 1; ++ post_recv = 1; ++ mux_data_count2[TS0710MUX_GPRS1_SEND_COUNT_IDX] ++ += c; ++ } ++ } else if (dlci == TS0710MUX_GPRS2_DLCI) { ++ if (add_count ++ (TS0710MUX_GPRS2_SEND_COUNT_IDX, c) < 0) { ++ post_recv_count_flag = 1; ++ post_recv = 1; ++ mux_data_count2[TS0710MUX_GPRS2_SEND_COUNT_IDX] ++ += c; ++ } ++ } ++ ++ if (post_recv) ++ schedule_work(&post_recv_tqueue); ++ ++ if (mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY) == 0) { ++ /* Sending bottom half should be ++ run after return from this function */ ++ mux_sched_send(); ++ } ++ return c; ++ } else { ++ TS0710_PRINTK("MUX mux_write: DLCI %d not connected\n", dlci); ++ return -EDISCONNECTED; ++ } ++} ++ ++static int mux_write_room(struct tty_struct *tty) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int retval; ++ int line; ++ __u8 dlci; ++ mux_send_struct *send_info; ++ ++ retval = 0; ++ if (!tty) { ++ goto out; ++ } ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ goto out; ++ } ++ ++ dlci = tty2dlci[line]; ++ if (ts0710->dlci[0].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped on all channels, returning ZERO\n"); ++ goto out; ++ } else if (ts0710->dlci[dlci].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped, returning ZERO\n"); ++ goto out; ++ } else if (ts0710->dlci[dlci].state != CONNECTED) { ++ TS0710_DEBUG("DLCI %d not connected\n", dlci); ++ goto out; ++ } ++ ++ if (!(mux_send_info_flags[line])) { ++ goto out; ++ } ++ send_info = mux_send_info[line]; ++ if (!send_info) { ++ goto out; ++ } ++ if (send_info->filled) { ++ goto out; ++ } ++ ++ retval = ts0710->dlci[dlci].mtu - 1; ++ ++ out: ++ return retval; ++} ++ ++static int mux_ioctl(struct tty_struct *tty, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int line; ++ __u8 dlci; ++ ++ UNUSED_PARAM(file); ++ UNUSED_PARAM(arg); ++ ++ if (!tty) { ++ return -EIO; ++ } ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ return -ENODEV; ++ } ++ ++ dlci = tty2dlci[line]; ++ switch (cmd) { ++ case TS0710MUX_IO_MSC_HANGUP: ++ if (ts0710_msc_msg(ts0710, EA | RTR | DV, MCC_CMD, dlci) < 0) { ++ return -EAGAIN; ++ } else { ++ return 0; ++ } ++ ++ case TS0710MUX_IO_TEST_CMD: ++ return ts0710_exec_test_cmd(); ++/* ++ case TS0710MUX_IO_DLCI_FC_ON: ++ if( line == 0 ) { ++ break; ++ } ++ if( ts0710_msc_msg(ts0710, EA | RTC | RTR | DV, MCC_CMD, (__u8)line) < 0) { ++ return -EAGAIN; ++ } else { ++ return 0; ++ } ++ ++ case TS0710MUX_IO_DLCI_FC_OFF: ++ if( line == 0 ) { ++ break; ++ } ++ if( ts0710_msc_msg(ts0710, EA | FC | RTC | RTR | DV, MCC_CMD, (__u8)line) < 0) { ++ return -EAGAIN; ++ } else { ++ return 0; ++ } ++ ++ case TS0710MUX_IO_FC_ON: ++ if( line != 0 ) { ++ break; ++ } ++ if( ts0710_fcon_msg(ts0710, MCC_CMD) < 0) { ++ return -EAGAIN; ++ } else { ++ return 0; ++ } ++ ++ case TS0710MUX_IO_FC_OFF: ++ if( line != 0 ) { ++ break; ++ } ++ if( ts0710_fcoff_msg(ts0710, MCC_CMD) < 0) { ++ return -EAGAIN; ++ } else { ++ return 0; ++ } ++*/ ++ default: ++ break; ++ } ++ return -ENOIOCTLCMD; ++} ++ ++static void mux_flush_buffer(struct tty_struct *tty) ++{ ++ int line; ++ ++ if (!tty) { ++ return; ++ } ++ ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ return; ++ } ++ ++ TS0710_PRINTK("MUX %s: line is:%d\n", __FUNCTION__, line); ++ ++ if ((mux_send_info_flags[line]) ++ && (mux_send_info[line]) ++ && (mux_send_info[line]->filled)) { ++ ++ mux_send_info[line]->filled = 0; ++ } ++ ++ wake_up_interruptible(&tty->write_wait); ++#ifdef SERIAL_HAVE_POLL_WAIT ++ wake_up_interruptible(&tty->poll_wait); ++#endif ++ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && ++ tty->ldisc.write_wakeup) { ++ (tty->ldisc.write_wakeup) (tty); ++ } ++ ++/* ++ if( (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0) ) { ++ TS0710_PRINTK("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__); ++ ++#ifndef USB_FOR_MUX ++ TS0710_PRINTK("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__); ++ TS0710_SIG2APLOGD(); ++#endif ++ ++ return; ++ } ++ return COMM_FOR_MUX_DRIVER->flush_buffer(COMM_FOR_MUX_TTY); ++*/ ++} ++ ++static int mux_open(struct tty_struct *tty, struct file *filp) ++{ ++ int retval; ++ int line; ++ __u8 dlci; ++ __u8 cmdtty; ++ __u8 datatty; ++ mux_send_struct *send_info; ++ mux_recv_struct *recv_info; ++ ++ UNUSED_PARAM(filp); ++ ++ retval = -ENODEV; ++ if ((COMM_FOR_MUX_DRIVER == NULL) || (COMM_FOR_MUX_TTY == NULL)) { ++ ++#ifdef USB_FOR_MUX ++ TS0710_PRINTK("MUX: please install and open IPC-USB first\n"); ++#else ++ TS0710_PRINTK("MUX: please install and open ttyS0 first\n"); ++#endif ++ ++ goto out; ++ } ++ ++ if (!tty) { ++ goto out; ++ } ++ line = tty->index; ++ if ((line < 0) || (line >= NR_MUXS)) { ++ goto out; ++ } ++#ifdef TS0710SERVER ++ /* do nothing as a server */ ++ mux_tty[line]++; ++ retval = 0; ++#else ++ mux_tty[line]++; ++ dlci = tty2dlci[line]; ++ ++/* if( dlci == 1 ) { */ ++ /* Open server channel 0 first */ ++ if ((retval = ts0710_open_channel(0)) != 0) { ++ TS0710_PRINTK("MUX: Can't connect server channel 0!\n"); ++ ts0710_init(); ++ ++ mux_tty[line]--; ++ goto out; ++ } ++/* } */ ++ ++ /* Allocate memory first. As soon as connection has been established, MUX may receive */ ++ if (mux_send_info_flags[line] == 0) { ++ send_info = ++ (mux_send_struct *) kmalloc(sizeof(mux_send_struct), ++ GFP_KERNEL); ++ if (!send_info) { ++ retval = -ENOMEM; ++ ++ mux_tty[line]--; ++ goto out; ++ } ++ send_info->length = 0; ++ send_info->flags = 0; ++ send_info->filled = 0; ++ mux_send_info[line] = send_info; ++ mux_send_info_flags[line] = 1; ++ TS0710_DEBUG("Allocate mux_send_info for /dev/mux%d", line); ++ } ++ ++ if (mux_recv_info_flags[line] == 0) { ++ recv_info = ++ (mux_recv_struct *) kmalloc(sizeof(mux_recv_struct), ++ GFP_KERNEL); ++ if (!recv_info) { ++ mux_send_info_flags[line] = 0; ++ kfree(mux_send_info[line]); ++ mux_send_info[line] = 0; ++ TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line); ++ retval = -ENOMEM; ++ ++ mux_tty[line]--; ++ goto out; ++ } ++ recv_info->length = 0; ++ recv_info->total = 0; ++ recv_info->mux_packet = 0; ++ recv_info->next = 0; ++ recv_info->no_tty = line; ++ recv_info->post_unthrottle = 0; ++ mux_recv_info[line] = recv_info; ++ mux_recv_info_flags[line] = 1; ++ TS0710_DEBUG("Allocate mux_recv_info for /dev/mux%d", line); ++ } ++ ++ /* Now establish DLCI connection */ ++ cmdtty = dlci2tty[dlci].cmdtty; ++ datatty = dlci2tty[dlci].datatty; ++ if ((mux_tty[cmdtty] > 0) || (mux_tty[datatty] > 0)) { ++ if ((retval = ts0710_open_channel(dlci)) != 0) { ++ TS0710_PRINTK("MUX: Can't connected channel %d!\n", ++ dlci); ++ ts0710_reset_dlci(dlci); ++ ++ mux_send_info_flags[line] = 0; ++ kfree(mux_send_info[line]); ++ mux_send_info[line] = 0; ++ TS0710_DEBUG("Free mux_send_info for /dev/mux%d", line); ++ ++ mux_recv_info_flags[line] = 0; ++ free_mux_recv_struct(mux_recv_info[line]); ++ mux_recv_info[line] = 0; ++ TS0710_DEBUG("Free mux_recv_info for /dev/mux%d", line); ++ ++ mux_tty[line]--; ++ goto out; ++ } ++ } ++ ++ retval = 0; ++#endif ++ out: ++ return retval; ++} ++ ++/* mux dispatcher, call from serial.c receiver_chars() */ ++void mux_dispatcher(struct tty_struct *tty) ++{ ++ UNUSED_PARAM(tty); ++ ++ schedule_work(&receive_tqueue); ++} ++ ++/*For BP UART problem Begin*/ ++#ifdef TS0710SEQ2 ++static int send_ack(ts0710_con * ts0710, __u8 seq_num, __u8 bp_seq1, ++ __u8 bp_seq2) ++#else ++static int send_ack(ts0710_con * ts0710, __u8 seq_num) ++#endif ++{ ++ __u8 buf[20]; ++ short_frame *ack; ++ ++#ifdef TS0710SEQ2 ++ static __u16 ack_seq = 0; ++#endif ++ ++ ack = (short_frame *) (buf + 1); ++ ack->h.addr.ea = 1; ++ ack->h.addr.cr = ((ts0710->initiator) & 0x1); ++ ack->h.addr.d = 0; ++ ack->h.addr.server_chn = 0; ++ ack->h.control = ACK; ++ ack->h.length.ea = 1; ++ ++#ifdef TS0710SEQ2 ++ ack->h.length.len = 5; ++ ack->data[0] = seq_num; ++ ack->data[1] = bp_seq1; ++ ack->data[2] = bp_seq2; ++ ack->data[3] = (ack_seq & 0xFF); ++ ack->data[4] = (ack_seq >> 8) & 0xFF; ++ ack_seq++; ++ ack->data[5] = crc_calc((__u8 *) ack, SHORT_CRC_CHECK); ++#else ++ ack->h.length.len = 1; ++ ack->data[0] = seq_num; ++ ack->data[1] = crc_calc((__u8 *) ack, SHORT_CRC_CHECK); ++#endif ++ ++ return basic_write(ts0710, buf, ++ (sizeof(short_frame) + FCS_SIZE + ++ ack->h.length.len)); ++} ++ ++/*For BP UART problem End*/ ++ ++static void receive_worker(void *private_) ++{ ++ struct tty_struct *tty = COMM_FOR_MUX_TTY; ++ int i, count; ++ static unsigned char tbuf[TS0710MUX_MAX_BUF_SIZE]; ++ static unsigned char *tbuf_ptr = &tbuf[0]; ++ static unsigned char *start_flag = 0; ++ unsigned char *search, *to, *from; ++ short_frame *short_pkt; ++ long_frame *long_pkt; ++ static int framelen = -1; ++ ++ /*For BP UART problem Begin */ ++ static __u8 expect_seq = 0; ++ __u32 crc_error; ++ __u8 *uih_data_start; ++ __u32 uih_len; ++ /*For BP UART problem End */ ++ ++ UNUSED_PARAM(private_); ++ ++ if (!tty) ++ return; ++ ++#ifdef USB_FOR_MUX ++ TS0710_DEBUG("Receive following bytes from IPC-USB"); ++#else ++ TS0710_DEBUG("Receive following bytes from UART"); ++#endif ++ ++ TS0710_DEBUGHEX(cp, count); ++ ++ if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) { ++ TS0710_PRINTK ++ ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n"); ++ count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf)); ++ } ++ ++ count = tty_buffer_request_room(tty, count); ++ ++ for (i = 0; i < count; i++) ++ tty_insert_flip_char(tty, tbuf_ptr[i], TTY_NORMAL); ++ ++ tbuf_ptr += count; ++ search = &tbuf[0]; ++ ++ if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) { ++ schedule_work(&receive_tqueue); ++ return; ++ } ++ ++ if ((start_flag != 0) && (framelen != -1)) { ++ if ((tbuf_ptr - start_flag) < framelen) { ++ clear_bit(RECV_RUNNING, &mux_recv_flags); ++ return; ++ } ++ } ++ ++ while (1) { ++ if (start_flag == 0) { /* Frame Start Flag not found */ ++ framelen = -1; ++ while (search < tbuf_ptr) { ++ if (*search == TS0710_BASIC_FLAG) { ++ start_flag = search; ++ break; ++ } ++#ifdef TS0710LOG ++ else { ++ TS0710_LOG(">S %02x %c\n", *search, ++ *search); ++ } ++#endif ++ ++ search++; ++ } ++ ++ if (start_flag == 0) { ++ tbuf_ptr = &tbuf[0]; ++ break; ++ } ++ } else { /* Frame Start Flag found */ ++ /* 1 start flag + 1 address + 1 control + 1 or 2 length + lengths data + 1 FCS + 1 end flag */ ++ /* For BP UART problem 1 start flag + 1 seq_num + 1 address + ...... */ ++ /*if( (framelen == -1) && ((tbuf_ptr - start_flag) > TS0710_MAX_HDR_SIZE) ) */ ++ if ((framelen == -1) && ((tbuf_ptr - start_flag) > (TS0710_MAX_HDR_SIZE + SEQ_FIELD_SIZE))) { /*For BP UART problem */ ++ /*short_pkt = (short_frame *) (start_flag + 1); */ ++ short_pkt = (short_frame *) (start_flag + ADDRESS_FIELD_OFFSET); /*For BP UART problem */ ++ if (short_pkt->h.length.ea == 1) { /* short frame */ ++ /*framelen = TS0710_MAX_HDR_SIZE + short_pkt->h.length.len + 1; */ ++ framelen = TS0710_MAX_HDR_SIZE + short_pkt->h.length.len + 1 + SEQ_FIELD_SIZE; /*For BP UART problem */ ++ } else { /* long frame */ ++ /*long_pkt = (long_frame *) (start_flag + 1); */ ++ long_pkt = (long_frame *) (start_flag + ADDRESS_FIELD_OFFSET); /*For BP UART problem */ ++ /*framelen = TS0710_MAX_HDR_SIZE + GET_LONG_LENGTH( long_pkt->h.length ) + 2; */ ++ framelen = TS0710_MAX_HDR_SIZE + GET_LONG_LENGTH(long_pkt->h.length) + 2 + SEQ_FIELD_SIZE; /*For BP UART problem */ ++ } ++ ++ /*if( framelen > TS0710MUX_MAX_TOTAL_FRAME_SIZE ) { */ ++ if (framelen > (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE)) { /*For BP UART problem */ ++ TS0710_LOGSTR_FRAME(0, start_flag, ++ (tbuf_ptr - ++ start_flag)); ++ TS0710_PRINTK ++ ("MUX Error: %s: frame length:%d is bigger than Max total frame size:%d\n", ++ /*__FUNCTION__, framelen, TS0710MUX_MAX_TOTAL_FRAME_SIZE);*/ ++ __FUNCTION__, framelen, (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE)); /*For BP UART problem */ ++ search = start_flag + 1; ++ start_flag = 0; ++ framelen = -1; ++ continue; ++ } ++ } ++ ++ if ((framelen != -1) ++ && ((tbuf_ptr - start_flag) >= framelen)) { ++ if (*(start_flag + framelen - 1) == TS0710_BASIC_FLAG) { /* OK, We got one frame */ ++ ++ /*For BP UART problem Begin */ ++ TS0710_LOGSTR_FRAME(0, start_flag, ++ framelen); ++ TS0710_DEBUGHEX(start_flag, framelen); ++ ++ short_pkt = ++ (short_frame *) (start_flag + ++ ADDRESS_FIELD_OFFSET); ++ if ((short_pkt->h.length.ea) == 0) { ++ long_pkt = ++ (long_frame *) (start_flag + ++ ADDRESS_FIELD_OFFSET); ++ uih_len = ++ GET_LONG_LENGTH(long_pkt->h. ++ length); ++ uih_data_start = ++ long_pkt->h.data; ++ ++ crc_error = ++ crc_check((__u8 ++ *) (start_flag + ++ SLIDE_BP_SEQ_OFFSET), ++ LONG_CRC_CHECK + ++ 1, ++ *(uih_data_start + ++ uih_len)); ++ } else { ++ uih_len = ++ short_pkt->h.length.len; ++ uih_data_start = ++ short_pkt->data; ++ ++ crc_error = ++ crc_check((__u8 ++ *) (start_flag + ++ SLIDE_BP_SEQ_OFFSET), ++ SHORT_CRC_CHECK + ++ 1, ++ *(uih_data_start + ++ uih_len)); ++ } ++ ++ if (!crc_error) { ++ if (expect_seq == ++ *(start_flag + ++ SLIDE_BP_SEQ_OFFSET)) { ++ expect_seq++; ++ if (expect_seq >= 4) { ++ expect_seq = 0; ++ } ++#ifdef TS0710SEQ2 ++ send_ack ++ (&ts0710_connection, ++ expect_seq, ++ *(start_flag + ++ FIRST_BP_SEQ_OFFSET), ++ *(start_flag + ++ SECOND_BP_SEQ_OFFSET)); ++#else ++ send_ack ++ (&ts0710_connection, ++ expect_seq); ++#endif ++ ++ ts0710_recv_data ++ (&ts0710_connection, ++ start_flag + ++ ADDRESS_FIELD_OFFSET, ++ framelen - 2 - ++ SEQ_FIELD_SIZE); ++ } else { ++ ++#ifdef TS0710DEBUG ++ if (* ++ (start_flag + ++ SLIDE_BP_SEQ_OFFSET) ++ != 0x9F) { ++#endif ++ ++ TS0710_LOG ++ ("MUX sequence number %d is not expected %d, discard data!\n", ++ * ++ (start_flag ++ + ++ SLIDE_BP_SEQ_OFFSET), ++ expect_seq); ++ ++#ifdef TS0710SEQ2 ++ send_ack ++ (&ts0710_connection, ++ expect_seq, ++ * ++ (start_flag ++ + ++ FIRST_BP_SEQ_OFFSET), ++ * ++ (start_flag ++ + ++ SECOND_BP_SEQ_OFFSET)); ++#else ++ send_ack ++ (&ts0710_connection, ++ expect_seq); ++#endif ++ ++#ifdef TS0710DEBUG ++ } else { ++ *(uih_data_start ++ + uih_len) = ++ 0; ++ TS0710_PRINTK ++ ("MUX bp log: %s\n", ++ uih_data_start); ++ } ++#endif ++ ++ } ++ } else { /* crc_error */ ++ search = start_flag + 1; ++ start_flag = 0; ++ framelen = -1; ++ continue; ++ } /*End if(!crc_error) */ ++ ++ /*For BP UART problem End */ ++ ++/*For BP UART problem ++ TS0710_LOGSTR_FRAME(0, start_flag, framelen); ++ TS0710_DEBUGHEX(start_flag, framelen); ++ ts0710_recv_data(&ts0710_connection, start_flag + 1, framelen - 2); ++*/ ++ search = start_flag + framelen; ++ } else { ++ TS0710_LOGSTR_FRAME(0, start_flag, ++ framelen); ++ TS0710_DEBUGHEX(start_flag, framelen); ++ TS0710_PRINTK ++ ("MUX: Lost synchronization!\n"); ++ search = start_flag + 1; ++ } ++ ++ start_flag = 0; ++ framelen = -1; ++ continue; ++ } ++ ++ if (start_flag != &tbuf[0]) { ++ to = tbuf; ++ from = start_flag; ++ count = tbuf_ptr - start_flag; ++ while (count--) { ++ *to++ = *from++; ++ } ++ ++ tbuf_ptr -= (start_flag - tbuf); ++ start_flag = tbuf; ++ } ++ break; ++ } /* End Frame Start Flag found */ ++ } /* End while(1) */ ++ ++ clear_bit(RECV_RUNNING, &mux_recv_flags); ++} ++ ++static void post_recv_worker(void *private_) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ int tty_idx; ++ struct tty_struct *tty; ++ __u8 post_recv; ++ __u8 flow_control; ++ __u8 dlci; ++ mux_recv_struct *recv_info, *recv_info2, *post_recv_q; ++ int recv_room; ++ mux_recv_packet *recv_packet, *recv_packet2; ++ __u8 j; ++ ++ UNUSED_PARAM(private_); ++ ++ if (test_and_set_bit(RECV_RUNNING, &mux_recv_flags)) { ++ schedule_work(&post_recv_tqueue); ++ return; ++ } ++ ++ TS0710_DEBUG("Enter into post_recv_worker"); ++ ++ post_recv = 0; ++ if (!mux_recv_queue) { ++ goto out; ++ } ++ ++ post_recv_q = NULL; ++ recv_info2 = mux_recv_queue; ++ while ((recv_info = recv_info2)) { ++ recv_info2 = recv_info->next; ++ ++ if (!(recv_info->total)) { ++ TS0710_PRINTK ++ ("MUX Error: %s: Should not get here, recv_info->total == 0 \n", ++ __FUNCTION__); ++ continue; ++ } ++ ++ tty_idx = recv_info->no_tty; ++ dlci = tty2dlci[tty_idx]; ++ tty = mux_table[tty_idx]; ++ if ((!mux_tty[tty_idx]) || (!tty)) { ++ TS0710_PRINTK ++ ("MUX: No application waiting for, free recv_info! tty_idx:%d\n", ++ tty_idx); ++ mux_recv_info_flags[tty_idx] = 0; ++ free_mux_recv_struct(mux_recv_info[tty_idx]); ++ mux_recv_info[tty_idx] = 0; ++ ts0710_flow_on(dlci, ts0710); ++ continue; ++ } ++ ++ TS0710_DEBUG("/dev/mux%d recv_info->total is: %d", tty_idx, ++ recv_info->total); ++ ++ if (test_bit(TTY_THROTTLED, &tty->flags)) { ++ add_post_recv_queue(&post_recv_q, recv_info); ++ continue; ++ } else if (test_bit(TTY_DONT_FLIP, &tty->flags)) { ++ post_recv = 1; ++ add_post_recv_queue(&post_recv_q, recv_info); ++ continue; ++ } ++ ++ flow_control = 0; ++ recv_packet2 = recv_info->mux_packet; ++ while (recv_info->total) { ++ recv_room = 65535; ++ if (tty->receive_room) ++ recv_room = tty->receive_room; ++ ++ if (recv_info->length) { ++ if (recv_room < recv_info->length) { ++ flow_control = 1; ++ break; ++ } ++ ++ /* Put queued data into read buffer of tty */ ++ TS0710_DEBUG ++ ("Put queued recv data into read buffer of /dev/mux%d", ++ tty_idx); ++ TS0710_DEBUGHEX(recv_info->data, ++ recv_info->length); ++ (tty->ldisc.receive_buf) (tty, recv_info->data, ++ NULL, ++ recv_info->length); ++ recv_info->total -= recv_info->length; ++ recv_info->length = 0; ++ } else { /* recv_info->length == 0 */ ++ if ((recv_packet = recv_packet2)) { ++ recv_packet2 = recv_packet->next; ++ ++ if (recv_room < recv_packet->length) { ++ flow_control = 1; ++ recv_info->mux_packet = ++ recv_packet; ++ break; ++ } ++ ++ /* Put queued data into read buffer of tty */ ++ TS0710_DEBUG ++ ("Put queued recv data into read buffer of /dev/mux%d", ++ tty_idx); ++ TS0710_DEBUGHEX(recv_packet->data, ++ recv_packet->length); ++ (tty->ldisc.receive_buf) (tty, ++ recv_packet-> ++ data, NULL, ++ recv_packet-> ++ length); ++ recv_info->total -= recv_packet->length; ++ free_mux_recv_packet(recv_packet); ++ } else { ++ TS0710_PRINTK ++ ("MUX Error: %s: Should not get here, recv_info->total is:%u \n", ++ __FUNCTION__, recv_info->total); ++ } ++ } /* End recv_info->length == 0 */ ++ } /* End while( recv_info->total ) */ ++ ++ if (!(recv_info->total)) { ++ /* Important clear */ ++ recv_info->mux_packet = 0; ++ ++ if (recv_info->post_unthrottle) { ++ /* Do something for post_unthrottle */ ++ ts0710_flow_on(dlci, ts0710); ++ recv_info->post_unthrottle = 0; ++ } ++ } else { ++ add_post_recv_queue(&post_recv_q, recv_info); ++ ++ if (flow_control) { ++ /* Do something for flow control */ ++ if (recv_info->post_unthrottle) { ++ set_bit(TTY_THROTTLED, &tty->flags); ++ recv_info->post_unthrottle = 0; ++ } else { ++ ts0710_flow_off(tty, dlci, ts0710); ++ } ++ } /* End if( flow_control ) */ ++ } ++ } /* End while( (recv_info = recv_info2) ) */ ++ ++ mux_recv_queue = post_recv_q; ++ ++ out: ++ if (post_recv_count_flag) { ++ post_recv_count_flag = 0; ++ for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) { ++ if (mux_data_count2[j] > 0) { ++ if (add_count(j, mux_data_count2[j]) == 0) { ++ mux_data_count2[j] = 0; ++ } else { ++ post_recv_count_flag = 1; ++ post_recv = 1; ++ } ++ } ++ } /* End for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) */ ++ } ++ /* End if( post_recv_count_flag ) */ ++ if (post_recv) ++ schedule_work(&post_recv_tqueue); ++ clear_bit(RECV_RUNNING, &mux_recv_flags); ++} ++ ++/* mux sender, call from serial.c transmit_chars() */ ++void mux_sender(void) ++{ ++ mux_send_struct *send_info; ++ int chars; ++ __u8 idx; ++ ++ chars = mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY); ++ if (!chars) { ++ /* chars == 0 */ ++ TS0710_LOG("<[]\n"); ++ mux_sched_send(); ++ return; ++ } ++ ++ idx = mux_send_info_idx; ++ if ((idx < NR_MUXS) && (mux_send_info_flags[idx])) { ++ send_info = mux_send_info[idx]; ++ if ((send_info) ++ && (send_info->filled) ++ && (send_info->length <= ++ (TS0710MUX_SERIAL_BUF_SIZE - chars))) { ++ ++ mux_sched_send(); ++ } ++ } ++} ++ ++static void send_worker(void *private_) ++{ ++ ts0710_con *ts0710 = &ts0710_connection; ++ __u8 j; ++ mux_send_struct *send_info; ++ int chars; ++ struct tty_struct *tty; ++ __u8 dlci; ++ ++ UNUSED_PARAM(private_); ++ ++ TS0710_DEBUG("Enter into send_worker"); ++ ++ mux_send_info_idx = NR_MUXS; ++ ++ if (ts0710->dlci[0].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped on all channels\n"); ++ return; ++ } ++ ++ for (j = 0; j < NR_MUXS; j++) { ++ ++ if (!(mux_send_info_flags[j])) { ++ continue; ++ } ++ ++ send_info = mux_send_info[j]; ++ if (!send_info) { ++ continue; ++ } ++ ++ if (!(send_info->filled)) { ++ continue; ++ } ++ ++ dlci = tty2dlci[j]; ++ if (ts0710->dlci[dlci].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped on channel DLCI: %d\n", ++ dlci); ++ continue; ++ } else if (ts0710->dlci[dlci].state != CONNECTED) { ++ TS0710_DEBUG("DLCI %d not connected\n", dlci); ++ send_info->filled = 0; ++ continue; ++ } ++ ++ chars = mux_chars_in_serial_buffer(COMM_FOR_MUX_TTY); ++ if (send_info->length <= (TS0710MUX_SERIAL_BUF_SIZE - chars)) { ++ TS0710_DEBUG("Send queued UIH for /dev/mux%d", j); ++ basic_write(ts0710, (__u8 *) send_info->frame, ++ send_info->length); ++ send_info->length = 0; ++ send_info->filled = 0; ++ } else { ++ mux_send_info_idx = j; ++ break; ++ } ++ } /* End for() loop */ ++ ++ /* Queue UIH data to be transmitted */ ++ for (j = 0; j < NR_MUXS; j++) { ++ ++ if (!(mux_send_info_flags[j])) { ++ continue; ++ } ++ ++ send_info = mux_send_info[j]; ++ if (!send_info) { ++ continue; ++ } ++ ++ if (send_info->filled) { ++ continue; ++ } ++ ++ /* Now queue UIH data to send_info->buf */ ++ ++ if (!mux_tty[j]) { ++ continue; ++ } ++ ++ tty = mux_table[j]; ++ if (!tty) { ++ continue; ++ } ++ ++ dlci = tty2dlci[j]; ++ if (ts0710->dlci[dlci].state == FLOW_STOPPED) { ++ TS0710_DEBUG("Flow stopped on channel DLCI: %d\n", ++ dlci); ++ continue; ++ } else if (ts0710->dlci[dlci].state != CONNECTED) { ++ TS0710_DEBUG("DLCI %d not connected\n", dlci); ++ continue; ++ } ++ ++ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) ++ && tty->ldisc.write_wakeup) { ++ (tty->ldisc.write_wakeup) (tty); ++ } ++ wake_up_interruptible(&tty->write_wait); ++ ++#ifdef SERIAL_HAVE_POLL_WAIT ++ wake_up_interruptible(&tty->poll_wait); ++#endif ++ ++ if (send_info->filled) { ++ if (j < mux_send_info_idx) { ++ mux_send_info_idx = j; ++ } ++ } ++ } /* End for() loop */ ++} ++ ++static int get_count(__u8 idx) ++{ ++ int ret; ++ ++ if (idx > TS0710MUX_COUNT_MAX_IDX) { ++ TS0710_PRINTK("MUX get_count: invalid idx: %d!\n", idx); ++ return -1; ++ } ++ ++ down(&mux_data_count_mutex[idx]); ++ ret = mux_data_count[idx]; ++ up(&mux_data_count_mutex[idx]); ++ ++ return ret; ++} ++ ++static int set_count(__u8 idx, int count) ++{ ++ if (idx > TS0710MUX_COUNT_MAX_IDX) { ++ TS0710_PRINTK("MUX set_count: invalid idx: %d!\n", idx); ++ return -1; ++ } ++ if (count < 0) { ++ TS0710_PRINTK("MUX set_count: invalid count: %d!\n", count); ++ return -1; ++ } ++ ++ down(&mux_data_count_mutex[idx]); ++ mux_data_count[idx] = count; ++ up(&mux_data_count_mutex[idx]); ++ ++ return 0; ++} ++ ++static int add_count(__u8 idx, int count) ++{ ++ if (idx > TS0710MUX_COUNT_MAX_IDX) { ++ TS0710_PRINTK("MUX add_count: invalid idx: %d!\n", idx); ++ return -1; ++ } ++ if (count <= 0) { ++ TS0710_PRINTK("MUX add_count: invalid count: %d!\n", count); ++ return -1; ++ } ++ ++ if (down_trylock(&mux_data_count_mutex[idx])) ++ return -1; ++ mux_data_count[idx] += count; ++ up(&mux_data_count_mutex[idx]); ++ ++ return 0; ++} ++ ++ssize_t file_proc_read(struct file * file, char *buf, size_t size, ++ loff_t * ppos) ++{ ++ gprs_bytes gprsData[TS0710MUX_GPRS_SESSION_MAX]; ++ int bufLen = sizeof(gprs_bytes) * TS0710MUX_GPRS_SESSION_MAX; ++ ++ UNUSED_PARAM(file); ++ UNUSED_PARAM(size); ++ UNUSED_PARAM(ppos); ++ ++ gprsData[0].recvBytes = get_count(TS0710MUX_GPRS1_RECV_COUNT_IDX); ++ gprsData[0].sentBytes = get_count(TS0710MUX_GPRS1_SEND_COUNT_IDX); ++ gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].recvBytes = ++ get_count(TS0710MUX_GPRS2_RECV_COUNT_IDX); ++ gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes = ++ get_count(TS0710MUX_GPRS2_SEND_COUNT_IDX); ++ ++ copy_to_user(buf, gprsData, bufLen); ++ ++ return bufLen; ++} ++ ++ssize_t file_proc_write(struct file * file, const char *buf, size_t count, ++ loff_t * ppos) ++{ ++ gprs_bytes gprsData[TS0710MUX_GPRS_SESSION_MAX]; ++ int bufLen = sizeof(gprs_bytes) * TS0710MUX_GPRS_SESSION_MAX; ++ ++ UNUSED_PARAM(file); ++ UNUSED_PARAM(count); ++ UNUSED_PARAM(ppos); ++ ++ memset(gprsData, 0, bufLen); ++ ++ copy_from_user(gprsData, buf, bufLen); ++ ++ set_count(TS0710MUX_GPRS1_RECV_COUNT_IDX, gprsData[0].recvBytes); ++ set_count(TS0710MUX_GPRS1_SEND_COUNT_IDX, gprsData[0].sentBytes); ++ set_count(TS0710MUX_GPRS2_RECV_COUNT_IDX, ++ gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].recvBytes); ++ set_count(TS0710MUX_GPRS2_SEND_COUNT_IDX, ++ gprsData[TS0710MUX_GPRS_SESSION_MAX - 1].sentBytes); ++ ++ return bufLen; ++} ++ ++static void gprs_proc_init(void) ++{ ++ gprs_proc_file = ++ create_proc_entry("gprsbytes", S_IRUSR | S_IWUSR, NULL); ++ gprs_proc_file->proc_fops = &file_proc_operations; ++} ++ ++static void gprs_proc_exit(void) ++{ ++ remove_proc_entry("gprsbytes", gprs_proc_file); ++} ++ ++static int __init mux_init(void) ++{ ++ __u8 j; ++ ++ if (COMM_FOR_MUX_DRIVER == NULL) { ++ ++#ifdef USB_FOR_MUX ++ panic("please install IPC-USB first\n"); ++#else ++ panic("please install ttyS0 first\n"); ++#endif ++ ++ } ++ ++ ts0710_init(); ++ ++ for (j = 0; j < NR_MUXS; j++) { ++ mux_send_info_flags[j] = 0; ++ mux_send_info[j] = 0; ++ mux_recv_info_flags[j] = 0; ++ mux_recv_info[j] = 0; ++ } ++ mux_send_info_idx = NR_MUXS; ++ mux_recv_queue = NULL; ++ mux_recv_flags = 0; ++ ++ for (j = 0; j < TS0710MUX_COUNT_IDX_NUM; j++) { ++ mux_data_count[j] = 0; ++ mux_data_count2[j] = 0; ++ init_MUTEX(&mux_data_count_mutex[j]); ++ } ++ post_recv_count_flag = 0; ++ ++ INIT_WORK(&send_tqueue, send_worker, NULL); ++ INIT_WORK(&receive_tqueue, receive_worker, NULL); ++ INIT_WORK(&post_recv_tqueue, post_recv_worker, NULL); ++ ++ memset(&mux_driver, 0, sizeof(struct tty_driver)); ++ memset(&mux_tty, 0, sizeof(mux_tty)); ++ mux_driver.magic = TTY_DRIVER_MAGIC; ++ mux_driver.driver_name = "ts0710mux"; ++ mux_driver.name = "ts0710mux"; ++ mux_driver.major = TS0710MUX_MAJOR; ++ mux_driver.minor_start = TS0710MUX_MINOR_START; ++ mux_driver.num = NR_MUXS; ++ mux_driver.type = TTY_DRIVER_TYPE_SERIAL; ++ mux_driver.subtype = SERIAL_TYPE_NORMAL; ++ mux_driver.init_termios = tty_std_termios; ++ mux_driver.init_termios.c_iflag = 0; ++ mux_driver.init_termios.c_oflag = 0; ++ mux_driver.init_termios.c_cflag = B38400 | CS8 | CREAD; ++ mux_driver.init_termios.c_lflag = 0; ++ mux_driver.flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW; ++ ++ mux_driver.ttys = mux_table; ++ mux_driver.termios = mux_termios; ++ mux_driver.termios_locked = mux_termios_locked; ++// mux_driver.driver_state = mux_state; ++ mux_driver.other = NULL; ++ ++ mux_driver.open = mux_open; ++ mux_driver.close = mux_close; ++ mux_driver.write = mux_write; ++ mux_driver.write_room = mux_write_room; ++ mux_driver.flush_buffer = mux_flush_buffer; ++ mux_driver.chars_in_buffer = mux_chars_in_buffer; ++ mux_driver.throttle = mux_throttle; ++ mux_driver.unthrottle = mux_unthrottle; ++ mux_driver.ioctl = mux_ioctl; ++ mux_driver.owner = THIS_MODULE; ++ ++ if (tty_register_driver(&mux_driver)) ++ panic("Couldn't register mux driver"); ++ ++ COMM_MUX_DISPATCHER = mux_dispatcher; ++ COMM_MUX_SENDER = mux_sender; ++ ++ gprs_proc_init(); ++ ++ return 0; ++} ++ ++static void __exit mux_exit(void) ++{ ++ __u8 j; ++ ++ COMM_MUX_DISPATCHER = NULL; ++ COMM_MUX_SENDER = NULL; ++ ++ gprs_proc_exit(); ++ ++ mux_send_info_idx = NR_MUXS; ++ mux_recv_queue = NULL; ++ for (j = 0; j < NR_MUXS; j++) { ++ if ((mux_send_info_flags[j]) && (mux_send_info[j])) { ++ kfree(mux_send_info[j]); ++ } ++ mux_send_info_flags[j] = 0; ++ mux_send_info[j] = 0; ++ ++ if ((mux_recv_info_flags[j]) && (mux_recv_info[j])) { ++ free_mux_recv_struct(mux_recv_info[j]); ++ } ++ mux_recv_info_flags[j] = 0; ++ mux_recv_info[j] = 0; ++ } ++ ++ if (tty_unregister_driver(&mux_driver)) ++ panic("Couldn't unregister mux driver"); ++} ++ ++module_init(mux_init); ++module_exit(mux_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Harald Welte <laforge@openezx.org>"); ++MODULE_DESCRIPTION("TS 07.10 Multiplexer"); +Index: linux-2.6.23/drivers/char/ts0710_mux.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/char/ts0710_mux.h 2007-10-22 22:26:50.000000000 +0200 +@@ -0,0 +1,103 @@ ++/* ++ * mux_macro.h ++ * ++ * Copyright (C) 2002 2005 Motorola ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ * 11/18/2002 (Motorola) - Initial version ++ * ++ */ ++ ++/* ++* This header file should be included by both MUX and other applications ++* which access MUX device files. It gives the additional macro definitions ++* shared between MUX and applications. ++*/ ++ ++/* MUX DLCI(Data Link Connection Identifier) Configuration */ ++/* ++* DLCI Service ++* 0 Control Channel ++* 1 Voice Call & Network-related ++* 2 SMS MO ++* 3 SMS MT ++* 4 Phonebook & related ++* 5 MISC ++* 6 CSD/FAX ++* 7 GPRS1 ++* 8 GPRS2 ++* 9 Logger CMD ++* 10 Logger Data ++* 11 Test CMD ++* 12 AGPS ++* 13 Net Monitor ++*/ ++ ++/* Mapping between DLCI and MUX device files */ ++/* ++* File Name Minor DLCI AT Command/Data ++* /dev/mux0 0 1 AT Command ++* /dev/mux1 1 2 AT Command ++* /dev/mux2 2 3 AT Command ++* /dev/mux3 3 4 AT Command ++* /dev/mux4 4 5 AT Command ++* /dev/mux5 5 6 AT Command ++* /dev/mux6 6 7 AT Command ++* /dev/mux7 7 8 AT Command ++* /dev/mux8 8 6 Data ++* /dev/mux9 9 7 Data ++* /dev/mux10 10 8 Data ++* /dev/mux11 11 9 Data ++* /dev/mux12 12 10 Data ++* /dev/mux13 13 11 Data ++* /dev/mux14 14 12 Data ++* /dev/mux15 15 13 Data ++*/ ++ ++#define MUX_CMD_FILE_VOICE_CALL "/dev/mux0" ++#define MUX_CMD_FILE_SMS_MO "/dev/mux1" ++#define MUX_CMD_FILE_SMS_MT "/dev/mux2" ++#define MUX_CMD_FILE_PHONEBOOK "/dev/mux3" ++#define MUX_CMD_FILE_MISC "/dev/mux4" ++#define MUX_CMD_FILE_CSD "/dev/mux5" ++#define MUX_CMD_FILE_GPRS1 "/dev/mux6" ++#define MUX_CMD_FILE_GPRS2 "/dev/mux7" ++ ++#define MUX_DATA_FILE_CSD "/dev/mux8" ++#define MUX_DATA_FILE_GPRS1 "/dev/mux9" ++#define MUX_DATA_FILE_GPRS2 "/dev/mux10" ++#define MUX_DATA_FILE_LOGGER_CMD "/dev/mux11" ++#define MUX_DATA_FILE_LOGGER_DATA "/dev/mux12" ++#define MUX_DATA_FILE_TEST_CMD "/dev/mux13" ++#define MUX_DATA_FILE_AGPS "/dev/mux14" ++#define MUX_DATA_FILE_NET_MONITOR "/dev/mux15" ++ ++#define NUM_MUX_CMD_FILES 8 ++#define NUM_MUX_DATA_FILES 8 ++#define NUM_MUX_FILES ( NUM_MUX_CMD_FILES + NUM_MUX_DATA_FILES ) ++ ++/* Special ioctl() upon a MUX device file for hanging up a call */ ++#define TS0710MUX_IO_MSC_HANGUP 0x54F0 ++ ++/* Special ioctl() upon a MUX device file for MUX loopback test */ ++#define TS0710MUX_IO_TEST_CMD 0x54F1 ++ ++/* Special Error code might be return from write() to a MUX device file */ ++#define EDISCONNECTED 900 /* Logical data link is disconnected */ ++ ++/* Special Error code might be return from open() to a MUX device file */ ++#define EREJECTED 901 /* Logical data link connection request is rejected */ +Index: linux-2.6.23/drivers/char/ts0710_mux_usb.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/char/ts0710_mux_usb.c 2007-10-22 22:26:50.000000000 +0200 +@@ -0,0 +1,868 @@ ++/* ++ * linux/drivers/usb/ipcusb.c ++ * ++ * Implementation of a ipc driver based Intel's Bulverde USB Host ++ * Controller. ++ * ++ * Copyright (C) 2003-2005 Motorola ++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * 2003-Nov-03 - (Motorola) created ++ * 2004-Feb-20 - (Motorola) Add Power Manager codes ++ * 2004-Apr-14 - (Motorola) Update Suspend/Resume codes ++ * 2004-May-10 - (Motorola) Add unlink_urbs codes and do some updates of send ++ * out urb sequence ++ * 2006-Jun-22 - (Harald Welte) port to Linux 2.6.x ++ * ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/list.h> ++#include <linux/errno.h> ++#include <asm/uaccess.h> ++#include <asm/hardware.h> ++#include <asm/arch/hardware.h> ++#include <asm/arch-pxa/pxa-regs.h> ++#include <asm/arch-pxa/ezx.h> ++#include <linux/slab.h> ++#include <linux/miscdevice.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <linux/tty.h> ++#include <linux/tty_driver.h> ++#include <linux/tty_flip.h> ++#include <linux/circ_buf.h> ++#include <linux/usb.h> ++ ++#include "ts0710_mux_usb.h" ++ ++/*Macro defined for this driver*/ ++#define DRIVER_VERSION "1.0alpha1" ++#define DRIVER_AUTHOR "Motorola / Harald Welte <laforge@openezx.org>" ++#define DRIVER_DESC "USB IPC Driver (TS07.10 lowlevel)" ++#define MOTO_IPC_VID 0x22b8 ++#define MOTO_IPC_PID 0x3006 ++#define IBUF_SIZE 32 /*urb size*/ ++#define IPC_USB_XMIT_SIZE 1024 ++#define IPC_URB_SIZE 32 ++#define IPC_USB_WRITE_INIT 0 ++#define IPC_USB_WRITE_XMIT 1 ++#define IPC_USB_PROBE_READY 3 ++#define IPC_USB_PROBE_NOT_READY 4 ++#define DBG_MAX_BUF_SIZE 1024 ++#define ICL_EVENT_INTERVAL (HZ) ++#undef BVD_DEBUG ++ ++#define IS_EP_BULK(ep) ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0) ++#define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) ++#define IS_EP_BULK_OUT(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) ++/*End defined macro*/ ++ ++/*global values defined*/ ++static struct usb_driver usb_ipc_driver; ++static struct timer_list ipcusb_timer; ++static struct timer_list suspend_timer; ++static struct timer_list wakeup_timer; ++static struct tty_struct ipcusb_tty; /* the coresponding tty struct, we just use flip buffer here. */ ++static struct tty_driver ipcusb_tty_driver; /* the coresponding tty driver, we just use write and chars in buff here*/ ++struct tty_driver *usb_for_mux_driver = NULL; ++struct tty_struct *usb_for_mux_tty = NULL; ++void (*usb_mux_dispatcher)(struct tty_struct *tty) = NULL; ++void (*usb_mux_sender)(void) = NULL; ++void (*ipcusb_ap_to_bp)(unsigned char*, int) = NULL; ++void (*ipcusb_bp_to_ap)(unsigned char*, int) = NULL; ++EXPORT_SYMBOL(usb_for_mux_driver); ++EXPORT_SYMBOL(usb_for_mux_tty); ++EXPORT_SYMBOL(usb_mux_dispatcher); ++EXPORT_SYMBOL(usb_mux_sender); ++EXPORT_SYMBOL(ipcusb_ap_to_bp); ++EXPORT_SYMBOL(ipcusb_bp_to_ap); ++static int sumbit_times = 0; ++static int callback_times = 0; ++//static unsigned long last_jiff = 0; ++extern int usbh_finished_resume; ++/*end global values defined*/ ++ ++MODULE_AUTHOR(DRIVER_AUTHOR); ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_LICENSE("GPL"); ++ ++#ifdef BVD_DEBUG ++#define bvd_dbg(format, arg...) printk(__FILE__ ": " format "\n" , ## arg) ++#else ++#define bvd_dbg(format, arg...) do {} while (0) ++#endif ++ ++/* USB device context */ ++typedef struct { ++ struct list_head list; ++ int size; ++ char *body; ++} buf_list_t; ++ ++struct ipc_usb_data { ++ u_int8_t write_finished_flag; ++ u_int8_t write_flag, ++ ipc_flag, ++ suspend_flag; ++ struct usb_device *ipc_dev; ++ struct urb readurb_mux, ++ writeurb_mux, ++ writeurb_dsplog; ++ char *obuf, *ibuf; ++ int writesize; /* max packet size for the ++ output bulk endpoint * ++ transfer buffers */ ++ ++ struct circ_buf xmit; /* write cric bufffer */ ++ struct list_head in_buf_list; ++ char bulk_in_ep_mux, ++ bulk_out_ep_mux, ++ bulk_in_ep_dsplog; ++ unsigned int ifnum; ++ ++ struct tasklet_struct bh, ++ bh_bp; ++ ++ spinlock_t lock; ++}; ++ ++struct ipc_usb_data *bvd_ipc; ++ ++#ifdef BVD_DEBUG ++static void bvd_dbg_hex(__u8 *buf, int len) ++{ ++ static unsigned char tbuf[DBG_MAX_BUF_SIZE]; ++ int i, c; ++ ++ if (len <= 0) ++ return; ++ ++ c = 0; ++ for (i=0; (i < len) && (c < (DBG_MAX_BUF_SIZE - 3)); i++) { ++ sprintf(&tbuf[c], "%02x ",buf[i]); ++ c += 3; ++ } ++ tbuf[c] = 0; ++ ++ printk("%s: %s\n", __FUNCTION__, tbuf); ++} ++#else ++#define bvd_dbg_hex(buf, len) ++#endif ++ ++static int unlink_urbs(struct urb *urb) ++{ ++ unsigned long flags; ++ int retval; ++ ++ spin_lock_irqsave(&bvd_ipc->lock, flags); ++ ++ retval = usb_unlink_urb(urb); ++ if (retval != -EINPROGRESS && retval != 0) ++ printk("unlink urb err, %d", retval); ++ ++ spin_unlock_irqrestore(&bvd_ipc->lock, flags); ++ return retval; ++} ++ ++static void append_to_inbuf_list(struct urb *urb) ++{ ++ buf_list_t *inbuf; ++ int count = urb->actual_length; ++ ++ inbuf = kmalloc(sizeof(buf_list_t), GFP_KERNEL); ++ if (!inbuf) { ++ printk("append_to_inbuf_list: (%d) out of memory!\n", ++ sizeof(buf_list_t)); ++ return; ++ } ++ ++ inbuf->size = count; ++ inbuf->body = kmalloc(sizeof(char)*count, GFP_KERNEL); ++ if (!inbuf->body) { ++ kfree(inbuf); ++ printk("append_to_inbuf_list: (%d) out of memory!\n", ++ sizeof(char)*count); ++ return; ++ } ++ memcpy(inbuf->body, (unsigned char*)urb->transfer_buffer, count); ++ list_add_tail(&inbuf->list, &bvd_ipc->in_buf_list); ++} ++ ++static void ipcusb_timeout(unsigned long data) ++{ ++ struct tty_struct *tty = &ipcusb_tty; ++ struct urb *urb = (struct urb *)data; ++ ++ bvd_dbg("ipcusb_timeout***"); ++ ++ while (!(list_empty(&bvd_ipc->in_buf_list))) { ++ int count; ++ buf_list_t *inbuf; ++ struct list_head *ptr = NULL; ++ ++ ptr = bvd_ipc->in_buf_list.next; ++ inbuf = list_entry (ptr, buf_list_t, list); ++ count = inbuf->size; ++ if (tty_insert_flip_string(tty, inbuf->body, count) >= count) { ++ list_del(ptr); ++ kfree(inbuf->body); ++ inbuf->body = NULL; ++ kfree(inbuf); ++ } else { ++ bvd_dbg("ipcusb_timeout: bvd_ipc->in_buf_list empty!"); ++ break; ++ } ++ } ++ ++ if (usb_mux_dispatcher) ++ usb_mux_dispatcher(tty); /**call Liu changhui's func.**/ ++ ++ if (list_empty(&bvd_ipc->in_buf_list)) { ++ urb->actual_length = 0; ++ urb->dev = bvd_ipc->ipc_dev; ++ if (usb_submit_urb(urb, GFP_ATOMIC)) ++ bvd_dbg("ipcusb_timeout: failed resubmitting read urb"); ++ bvd_dbg("ipcusb_timeout: resubmited read urb"); ++ } else { ++ ipcusb_timer.data = (unsigned long)urb; ++ mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000)); ++ } ++} ++ ++static void usb_ipc_read_bulk(struct urb *urb, struct pt_regs *regs) ++{ ++ buf_list_t *inbuf; ++ int count = urb->actual_length; ++ struct tty_struct *tty = &ipcusb_tty; ++ ++ bvd_dbg("usb_ipc_read_bulk: begining!"); ++ if (urb->status) ++ printk("nonzero read bulk status received: %d\n", urb->status); ++ ++ bvd_dbg("usb_ipc_read_bulk: urb->actual_length=%d", urb->actual_length); ++ bvd_dbg("usb_ipc_read_bulk: urb->transfer_buffer:"); ++ ++ bvd_dbg_hex((unsigned char*)urb->transfer_buffer, urb->actual_length); ++ ++ if (count > 0 && ((*ipcusb_bp_to_ap) != NULL)) ++ (*ipcusb_bp_to_ap)(urb->transfer_buffer, urb->actual_length); ++ ++ if (!(list_empty(&bvd_ipc->in_buf_list))) { ++ int need_mux = 0; ++ ++ bvd_dbg("usb_ipc_read_bulk: some urbs in_buf_list"); ++ if (count > 0) { ++ bvd_ipc->suspend_flag = 1; ++ append_to_inbuf_list(urb); /* append the current received urb */ ++#if 0 ++ if(jiffies - last_jiff > ICL_EVENT_INTERVAL) ++ { ++ last_jiff = jiffies; ++ queue_apm_event(KRNL_ICL, NULL); ++ } ++#endif ++ } ++ ++ while (!(list_empty(&bvd_ipc->in_buf_list))) { ++ struct list_head* ptr = NULL; ++ ptr = bvd_ipc->in_buf_list.next; ++ inbuf = list_entry(ptr, buf_list_t, list); ++ count = inbuf->size; ++ need_mux = 1; ++ ++ tty_insert_flip_string(tty, inbuf->body, count); ++ ++ list_del(ptr); ++ kfree(inbuf->body); ++ inbuf->body = NULL; ++ kfree(inbuf); ++ } ++ ++ if (usb_mux_dispatcher && need_mux) ++ usb_mux_dispatcher(tty); /* call Liu changhui's func. */ ++ ++ if (list_empty(&bvd_ipc->in_buf_list)) { ++ urb->actual_length = 0; ++ urb->dev = bvd_ipc->ipc_dev; ++ if (usb_submit_urb(urb, GFP_ATOMIC)) ++ bvd_dbg("usb_ipc_read_bulk: " ++ "failed resubmitting read urb"); ++ bvd_dbg("usb_ipc_read_bulk: resubmited read urb"); ++ } else { ++ ipcusb_timer.data = (unsigned long)urb; ++ mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000)); ++ } ++ } else if (count > 0) { ++ bvd_dbg("usb_ipc_read_bulk: no urbs in_buf_list"); ++ bvd_ipc->suspend_flag = 1; ++ ++ if (tty_insert_flip_string(tty, urb->transfer_buffer, ++ count) < count) { ++ bvd_ipc->suspend_flag = 1; ++ append_to_inbuf_list(urb); ++ ipcusb_timer.data = (unsigned long)urb; ++ mod_timer(&ipcusb_timer, jiffies+(10*HZ/1000)); ++#if 0 ++ if(jiffies - last_jiff > ICL_EVENT_INTERVAL) ++ { ++ last_jiff = jiffies; ++ queue_apm_event(KRNL_ICL, NULL); ++ } ++#endif ++ } ++ ++ if (usb_mux_dispatcher) ++ usb_mux_dispatcher(tty); /* call Liu changhui's func. */ ++ ++ urb->actual_length = 0; ++ urb->dev = bvd_ipc->ipc_dev; ++ if (usb_submit_urb(urb, GFP_ATOMIC)) ++ bvd_dbg("failed resubmitting read urb"); ++#if 0 ++ if(jiffies - last_jiff > ICL_EVENT_INTERVAL) ++ { ++ last_jiff = jiffies; ++ queue_apm_event(KRNL_ICL, NULL); ++ } ++#endif ++ bvd_dbg("usb_ipc_read_bulk: resubmited read urb"); ++ } ++ ++ bvd_dbg("usb_ipc_read_bulk: completed!!!"); ++} ++ ++static void usb_ipc_write_bulk(struct urb *urb, struct pt_regs *regs) ++{ ++ callback_times++; ++ bvd_ipc->write_finished_flag = 1; ++ ++ bvd_dbg("usb_ipc_write_bulk: begining!"); ++ //printk("%s: write_finished_flag=%d\n", __FUNCTION__, bvd_ipc->write_finished_flag); ++ ++ if (urb->status) ++ printk("nonzero write bulk status received: %d\n", urb->status); ++ ++ if (usb_mux_sender) ++ usb_mux_sender(); /**call Liu changhui's func**/ ++ ++ //printk("usb_ipc_write_bulk: mark ipcusb_softint!\n"); ++ tasklet_schedule(&bvd_ipc->bh); ++ ++ bvd_dbg("usb_ipc_write_bulk: finished!"); ++} ++ ++static void wakeup_timeout(unsigned long data) ++{ ++ GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW); ++ bvd_dbg("wakup_timeout: send GPIO_MCU_INT_SW signal!"); ++} ++ ++static void suspend_timeout(unsigned long data) ++{ ++ if (bvd_ipc->suspend_flag == 1) { ++ bvd_ipc->suspend_flag = 0; ++ mod_timer(&suspend_timer, jiffies+(5000*HZ/1000)); ++ bvd_dbg("suspend_timeout: add the suspend timer again"); ++ } else { ++ unlink_urbs(&bvd_ipc->readurb_mux); ++ UHCRHPS3 = 0x4; ++ mdelay(40); ++ bvd_dbg("suspend_timeout: send SUSPEND signal! UHCRHPS3=0x%x", ++ UHCRHPS3); ++ } ++} ++ ++static void ipcusb_xmit_data(void) ++{ ++ int c, count = IPC_URB_SIZE; ++ int result = 0; ++ int buf_flag = 0; ++ int buf_num = 0; ++ ++ //printk("%s: sumbit_times=%d, callback_times=%d\n", __FUNCTION__, sumbit_times, callback_times); ++ if (bvd_ipc->write_finished_flag == 0) ++ return; ++ ++ while (1) { ++ c = CIRC_CNT_TO_END(bvd_ipc->xmit.head, bvd_ipc->xmit.tail, ++ IPC_USB_XMIT_SIZE); ++ if (count < c) ++ c = count; ++ if (c <= 0) ++ break; ++ ++ memcpy(bvd_ipc->obuf+buf_num, ++ bvd_ipc->xmit.buf + bvd_ipc->xmit.tail, c); ++ buf_flag = 1; ++ bvd_ipc->xmit.tail = ((bvd_ipc->xmit.tail + c) ++ & (IPC_USB_XMIT_SIZE-1)); ++ count -= c; ++ buf_num += c; ++ } ++ ++ if (buf_num == 0) { ++ bvd_dbg("ipcusb_xmit_data: buf_num=%d, add suspend_timer", ++ buf_num); ++ bvd_ipc->suspend_flag = 0; ++ mod_timer(&suspend_timer, jiffies+(5000*HZ/1000)); ++ } ++ ++ bvd_dbg("ipcusb_xmit_data: buf_num=%d", buf_num); ++ bvd_dbg("ipcusb_xmit_data: bvd_ipc->obuf: "); ++ ++ bvd_dbg_hex((bvd_ipc->obuf)-buf_num, buf_num); ++ ++ if (buf_flag) { ++ bvd_ipc->writeurb_mux.transfer_buffer_length = buf_num; ++ bvd_dbg("ipcusb_xmit_data: copy data to write urb finished! "); ++ ++ if ((UHCRHPS3 & 0x4) == 0x4) { ++ static int ret; ++ int time = 0; ++ ++ /* if BP sleep, wake up BP first */ ++ pxa_gpio_mode(GPIO_IN | 41); ++ if (GPIO_is_high(41)) { ++ if (GPIO_is_high(GPIO_MCU_INT_SW)) ++ GPCR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW); ++ else ++ GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW); ++ ++ time = jiffies; ++ while (GPIO_is_high(41) && (jiffies < (time+HZ))); ++ ++ if (GPIO_is_high(41)) { ++ printk("%s: Wakeup BP timeout! BP state is %d\n", ++ __FUNCTION__, GPIO_is_high(41)); ++ } ++ if (GPIO_is_high(GPIO_MCU_INT_SW)) ++ GPCR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW); ++ else ++ GPSR(GPIO_MCU_INT_SW) = GPIO_bit(GPIO_MCU_INT_SW); ++ } ++ ++ /* Resume BP */ ++ UHCRHPS3 = 0x8; ++ mdelay(40); ++ bvd_dbg("ipcusb_xmit_data: Send RESUME signal! UHCRHPS3=0x%x", ++ UHCRHPS3); ++ /*send IN token*/ ++ bvd_ipc->readurb_mux.actual_length = 0; ++ bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev; ++ if (ret = usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) ++ printk("ipcusb_xmit_data: usb_submit_urb(read mux bulk)" ++ "failed! status=%d\n", ret); ++ bvd_dbg("ipcusb_xmit_data: Send a IN token successfully!"); ++ } ++ ++ sumbit_times++; ++ bvd_ipc->write_finished_flag = 0; ++ //printk("%s: clear write_finished_flag:%d\n", __FUNCTION__, bvd_ipc->write_finished_flag); ++ bvd_ipc->writeurb_mux.dev = bvd_ipc->ipc_dev; ++ if (result = usb_submit_urb(&bvd_ipc->writeurb_mux, GFP_ATOMIC)) ++ warn("ipcusb_xmit_data: funky result! result=%d\n", result); ++ ++ bvd_dbg("ipcusb_xmit_data: usb_submit_urb finished! result:%d", result); ++ ++ } ++} ++ ++static void usbipc_bh_func(unsigned long param) ++{ ++ ipcusb_xmit_data(); ++} ++ ++extern void get_halted_bit(void); ++ ++static void usbipc_bh_bp_func(unsigned long param) ++{ ++ if ((UHCRHPS3 & 0x4) == 0x4) { ++ UHCRHPS3 = 0x8; ++ mdelay(40); ++ bvd_dbg("ipcusb_softint_send_readurb: Send RESUME signal! " ++ "UHCRHPS3=0x%x", UHCRHPS3); ++ } ++ if (bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) { ++ get_halted_bit(); ++ ++ /*send a IN token*/ ++ bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev; ++ if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) { ++ bvd_dbg("ipcusb_softint_send_readurb: " ++ "usb_submit_urb(read mux bulk) failed!"); ++ } ++ bvd_dbg("ipcusb_softint_send_readurb: Send a IN token successfully!"); ++ bvd_ipc->suspend_flag = 0; ++ bvd_dbg("ipcusb_softint_send_readurb: add suspend_timer"); ++ mod_timer(&suspend_timer, jiffies+(5000*HZ/1000)); ++ } ++} ++ ++static int usb_ipc_write(struct tty_struct *tty, ++ const unsigned char *buf, int count) ++{ ++ int c, ret = 0; ++ ++ bvd_dbg("usb_ipc_write: count=%d, buf: ", count); ++ bvd_dbg_hex(buf, count); ++ ++ if (count <= 0) ++ return 0; ++ ++ if (*ipcusb_ap_to_bp != NULL) ++ (*ipcusb_ap_to_bp)(buf, count); ++ ++ bvd_ipc->suspend_flag = 1; ++ ++ if ((bvd_ipc->ipc_flag == IPC_USB_PROBE_READY) && ++ (bvd_ipc->xmit.head == bvd_ipc->xmit.tail)) { ++ bvd_dbg("usb_ipc_write: set write_flag"); ++ bvd_ipc->write_flag = IPC_USB_WRITE_XMIT; ++ } ++ ++ while (1) { ++ c = CIRC_SPACE_TO_END(bvd_ipc->xmit.head, ++ bvd_ipc->xmit.tail, IPC_USB_XMIT_SIZE); ++ if (count < c) ++ c = count; ++ if (c <= 0) ++ break; ++ ++ memcpy(bvd_ipc->xmit.buf + bvd_ipc->xmit.head, buf, c); ++ bvd_ipc->xmit.head = ((bvd_ipc->xmit.head + c) ++ & (IPC_USB_XMIT_SIZE-1)); ++ buf += c; ++ count -= c; ++ ret += c; ++ } ++ bvd_dbg("usb_ipc_write: ret=%d, bvd_ipc->xmit.buf: ", ret); ++ ++ bvd_dbg_hex(bvd_ipc->xmit.buf, ret); ++ ++ if (bvd_ipc->write_flag == IPC_USB_WRITE_XMIT) { ++ bvd_ipc->write_flag = IPC_USB_WRITE_INIT; ++ bvd_dbg("usb_ipc_write: mark ipcusb_softint"); ++ tasklet_schedule(&bvd_ipc->bh); ++ } ++ ++ bvd_dbg("usb_ipc_write: ret=%d\n", ret); ++ return ret; ++} ++ ++static int usb_ipc_chars_in_buffer(struct tty_struct *tty) ++{ ++ return CIRC_CNT(bvd_ipc->xmit.head, bvd_ipc->xmit.tail, IPC_USB_XMIT_SIZE); ++} ++ ++void usb_send_readurb(void) ++{ ++ //printk("usb_send_readurb: begining!UHCRHPS3=0x%x, usbh_finished_resume=%d\n", UHCRHPS3, usbh_finished_resume); ++ ++ if (usbh_finished_resume == 0) ++ return; ++ ++ tasklet_schedule(&bvd_ipc->bh_bp); ++} ++ ++static int usb_ipc_probe(struct usb_interface *intf, ++ const struct usb_device_id *id) ++{ ++ struct usb_device *usbdev = interface_to_usbdev(intf); ++ struct usb_config_descriptor *ipccfg; ++ struct usb_interface_descriptor *interface; ++ struct usb_endpoint_descriptor *endpoint; ++ int ep_cnt, readsize, writesize; ++ char have_bulk_in_mux, have_bulk_out_mux; ++ ++ bvd_dbg("usb_ipc_probe: vendor id 0x%x, device id 0x%x", ++ usbdev->descriptor.idVendor, usbdev->descriptor.idProduct); ++ ++ if ((usbdev->descriptor.idVendor != MOTO_IPC_VID) || ++ (usbdev->descriptor.idProduct != MOTO_IPC_PID)) ++ return -ENODEV; ++ ++ /* a2590c : dsplog interface is not supported by this driver */ ++ if (intf->minor == 2) /* dsplog interface number is 2 */ ++ return -1; ++ ++ bvd_dbg("usb_ipc_probe: USB dev address:%p", usbdev); ++ bvd_dbg("usb_ipc_probe: ifnum:%u", intf->minor); ++ ++ ipccfg = &usbdev->actconfig->desc; ++ bvd_dbg("usb_ipc_prob: config%d", ipccfg->bConfigurationValue); ++ bvd_dbg("usb_ipc_prob: bNumInterfaces = %d", ipccfg->bNumInterfaces); ++ ++ /* After this point we can be a little noisy about what we are trying ++ * to configure, hehe. */ ++ if (usbdev->descriptor.bNumConfigurations != 1) { ++ info("usb_ipc_probe: Only one device configuration " ++ "is supported."); ++ return -1; ++ } ++ ++ if (usbdev->config[0].desc.bNumInterfaces != 3) { ++ info("usb_ipc_probe: Only three device interfaces are " ++ "supported."); ++ return -1; ++ } ++ ++ interface = &intf->cur_altsetting->desc; ++ endpoint = &intf->cur_altsetting->endpoint[0].desc; ++ /* Start checking for two bulk endpoints or ... FIXME: This is a future ++ * enhancement...*/ ++ bvd_dbg("usb_ipc_probe: Number of Endpoints:%d", ++ (int) interface->bNumEndpoints); ++ if (interface->bNumEndpoints != 2) { ++ info("usb_ipc_probe: Only two endpoints supported."); ++ return -1; ++ } ++ ++ ep_cnt = have_bulk_in_mux = have_bulk_out_mux = 0; ++ ++ bvd_dbg("usb_ipc_probe: endpoint[0] is:%x", ++ (&endpoint[0])->bEndpointAddress); ++ bvd_dbg("usb_ipc_probe: endpoint[1] is:%x ", ++ (&endpoint[1])->bEndpointAddress); ++ ++ while (ep_cnt < interface->bNumEndpoints) { ++ ++ if (!have_bulk_in_mux && IS_EP_BULK_IN(endpoint[ep_cnt])) { ++ bvd_dbg("usb_ipc_probe: bEndpointAddress(IN) is:%x ", ++ (&endpoint[ep_cnt])->bEndpointAddress); ++ have_bulk_in_mux = ++ (&endpoint[ep_cnt])->bEndpointAddress; ++ readsize = (&endpoint[ep_cnt])->wMaxPacketSize; ++ bvd_dbg("usb_ipc_probe: readsize=%d", readsize); ++ ep_cnt++; ++ continue; ++ } ++ ++ if (!have_bulk_out_mux && IS_EP_BULK_OUT(endpoint[ep_cnt])) { ++ bvd_dbg("usb_ipc_probe: bEndpointAddress(OUT) is:%x ", ++ (&endpoint[ep_cnt])->bEndpointAddress); ++ have_bulk_out_mux = ++ (&endpoint[ep_cnt])->bEndpointAddress; ++ writesize = (&endpoint[ep_cnt])->wMaxPacketSize; ++ bvd_dbg("usb_ipc_probe: writesize=%d", writesize); ++ ep_cnt++; ++ continue; ++ } ++ ++ info("usb_ipc_probe: Undetected endpoint ^_^ "); ++ /* Shouldn't ever get here unless we have something weird */ ++ return -1; ++ } ++ ++ /* Perform a quick check to make sure that everything worked as it ++ * should have. */ ++ ++ switch (interface->bNumEndpoints) { ++ case 2: ++ if (!have_bulk_in_mux || !have_bulk_out_mux) { ++ info("usb_ipc_probe: Two bulk endpoints required."); ++ return -1; ++ } ++ break; ++ default: ++ info("usb_ipc_probe: Endpoint determination failed ^_^ "); ++ return -1; ++ } ++ ++ /* Ok, now initialize all the relevant values */ ++ if (!(bvd_ipc->obuf = (char *)kmalloc(writesize, GFP_KERNEL))) { ++ err("usb_ipc_probe: Not enough memory for the output buffer."); ++ kfree(bvd_ipc); ++ return -1; ++ } ++ bvd_dbg("usb_ipc_probe: obuf address:%p", bvd_ipc->obuf); ++ ++ if (!(bvd_ipc->ibuf = (char *)kmalloc(readsize, GFP_KERNEL))) { ++ err("usb_ipc_probe: Not enough memory for the input buffer."); ++ kfree(bvd_ipc->obuf); ++ kfree(bvd_ipc); ++ return -1; ++ } ++ bvd_dbg("usb_ipc_probe: ibuf address:%p", bvd_ipc->ibuf); ++ ++ bvd_ipc->ipc_flag = IPC_USB_PROBE_READY; ++ bvd_ipc->write_finished_flag = 1; ++ bvd_ipc->suspend_flag = 1; ++ bvd_ipc->bulk_in_ep_mux= have_bulk_in_mux; ++ bvd_ipc->bulk_out_ep_mux= have_bulk_out_mux; ++ bvd_ipc->ipc_dev = usbdev; ++ bvd_ipc->writesize = writesize; ++ INIT_LIST_HEAD (&bvd_ipc->in_buf_list); ++ ++ bvd_ipc->bh.func = usbipc_bh_func; ++ bvd_ipc->bh.data = (unsigned long) bvd_ipc; ++ ++ bvd_ipc->bh_bp.func = usbipc_bh_bp_func; ++ bvd_ipc->bh_bp.data = (unsigned long) bvd_ipc; ++ ++ /*Build a write urb*/ ++ usb_fill_bulk_urb(&bvd_ipc->writeurb_mux, usbdev, ++ usb_sndbulkpipe(bvd_ipc->ipc_dev, ++ bvd_ipc->bulk_out_ep_mux), ++ bvd_ipc->obuf, writesize, usb_ipc_write_bulk, ++ bvd_ipc); ++ //bvd_ipc->writeurb_mux.transfer_flags |= USB_ASYNC_UNLINK; ++ ++ /*Build a read urb and send a IN token first time*/ ++ usb_fill_bulk_urb(&bvd_ipc->readurb_mux, usbdev, ++ usb_rcvbulkpipe(usbdev, bvd_ipc->bulk_in_ep_mux), ++ bvd_ipc->ibuf, readsize, usb_ipc_read_bulk, bvd_ipc); ++ //bvd_ipc->readurb_mux.transfer_flags |= USB_ASYNC_UNLINK; ++ ++ usb_driver_claim_interface(&usb_ipc_driver, intf, bvd_ipc); ++ //usb_driver_claim_interface(&usb_ipc_driver, &ipccfg->interface[1], bvd_ipc); ++ ++ // a2590c: dsplog is not supported by this driver ++ // usb_driver_claim_interface(&usb_ipc_driver, ++ // &ipccfg->interface[2], bvd_ipc); ++ /*send a IN token first time*/ ++ bvd_ipc->readurb_mux.dev = bvd_ipc->ipc_dev; ++ if (usb_submit_urb(&bvd_ipc->readurb_mux, GFP_ATOMIC)) ++ printk("usb_ipc_prob: usb_submit_urb(read mux bulk) failed!\n"); ++ ++ bvd_dbg("usb_ipc_prob: Send a IN token successfully!"); ++ ++ if (bvd_ipc->xmit.head != bvd_ipc->xmit.tail) { ++ printk("usb_ipc_probe: mark ipcusb_softint!\n"); ++ tasklet_schedule(&bvd_ipc->bh); ++ } ++ ++ printk("usb_ipc_probe: completed probe!"); ++ usb_set_intfdata(intf, &bvd_ipc); ++ return 0; ++} ++ ++static void usb_ipc_disconnect(struct usb_interface *intf) ++{ ++ //struct usb_device *usbdev = interface_to_usbdev(intf); ++ struct ipc_usb_data *bvd_ipc_disconnect = usb_get_intfdata(intf); ++ ++ printk("usb_ipc_disconnect:*** \n"); ++ ++ if ((UHCRHPS3 & 0x4) == 0) ++ usb_unlink_urb(&bvd_ipc_disconnect->readurb_mux); ++ ++ usb_unlink_urb(&bvd_ipc_disconnect->writeurb_mux); ++ ++ bvd_ipc_disconnect->ipc_flag = IPC_USB_PROBE_NOT_READY; ++ kfree(bvd_ipc_disconnect->ibuf); ++ kfree(bvd_ipc_disconnect->obuf); ++ ++ usb_driver_release_interface(&usb_ipc_driver, ++ bvd_ipc_disconnect->ipc_dev->actconfig->interface[0]); ++ usb_driver_release_interface(&usb_ipc_driver, ++ bvd_ipc_disconnect->ipc_dev->actconfig->interface[1]); ++ ++ //a2590c: dsplog interface is not supported by this driver ++ //usb_driver_release_interface(&usb_ipc_driver, &bvd_ipc_disconnect->ipc_dev->actconfig->interface[2]); ++ ++ bvd_ipc_disconnect->ipc_dev = NULL; ++ ++ usb_set_intfdata(intf, NULL); ++ ++ printk("usb_ipc_disconnect completed!\n"); ++} ++ ++static struct usb_device_id usb_ipc_id_table[] = { ++ { USB_DEVICE(MOTO_IPC_VID, MOTO_IPC_PID) }, ++ { } /* Terminating entry */ ++}; ++ ++static struct usb_driver usb_ipc_driver = { ++ .name = "usb ipc", ++ .probe = usb_ipc_probe, ++ .disconnect = usb_ipc_disconnect, ++ .id_table = usb_ipc_id_table, ++}; ++ ++static int __init usb_ipc_init(void) ++{ ++ int result; ++ ++ bvd_dbg("init usb_ipc"); ++ /* register driver at the USB subsystem */ ++ result = usb_register(&usb_ipc_driver); ++ if (result < 0) { ++ err ("usb ipc driver could not be registered"); ++ return result; ++ } ++ ++ /*init the related mux interface*/ ++ if (!(bvd_ipc = kzalloc(sizeof(struct ipc_usb_data), GFP_KERNEL))) { ++ err("usb_ipc_init: Out of memory."); ++ usb_deregister(&usb_ipc_driver); ++ return -ENOMEM; ++ } ++ bvd_dbg("usb_ipc_init: Address of bvd_ipc:%p", bvd_ipc); ++ ++ if (!(bvd_ipc->xmit.buf = kmalloc(IPC_USB_XMIT_SIZE, GFP_KERNEL))) { ++ err("usb_ipc_init: Not enough memory for the input buffer."); ++ kfree(bvd_ipc); ++ usb_deregister(&usb_ipc_driver); ++ return -ENOMEM; ++ } ++ bvd_dbg("usb_ipc_init: bvd_ipc->xmit.buf address:%p", ++ bvd_ipc->xmit.buf); ++ bvd_ipc->ipc_dev = NULL; ++ bvd_ipc->xmit.head = bvd_ipc->xmit.tail = 0; ++ bvd_ipc->write_flag = IPC_USB_WRITE_INIT; ++ ++ ipcusb_tty_driver.write = usb_ipc_write; ++ ipcusb_tty_driver.chars_in_buffer = usb_ipc_chars_in_buffer; ++ ++ usb_for_mux_driver = &ipcusb_tty_driver; ++ usb_for_mux_tty = &ipcusb_tty; ++ ++ /* init timers for ipcusb read process and usb suspend */ ++ init_timer(&ipcusb_timer); ++ ipcusb_timer.function = ipcusb_timeout; ++ ++ init_timer(&suspend_timer); ++ suspend_timer.function = suspend_timeout; ++ ++ init_timer(&wakeup_timer); ++ wakeup_timer.function = wakeup_timeout; ++ ++ info("USB Host(Bulverde) IPC driver registered."); ++ info(DRIVER_VERSION ":" DRIVER_DESC); ++ ++ return 0; ++} ++ ++static void __exit usb_ipc_exit(void) ++{ ++ bvd_dbg("cleanup bvd_ipc"); ++ ++ kfree(bvd_ipc->xmit.buf); ++ kfree(bvd_ipc); ++ usb_deregister(&usb_ipc_driver); ++ ++ info("USB Host(Bulverde) IPC driver deregistered."); ++} ++ ++module_init(usb_ipc_init); ++module_exit(usb_ipc_exit); ++EXPORT_SYMBOL(usb_send_readurb); +Index: linux-2.6.23/drivers/char/ts0710_mux_usb.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/char/ts0710_mux_usb.h 2007-10-22 22:26:50.000000000 +0200 +@@ -0,0 +1,29 @@ ++/* ++ * linux/drivers/usb/ipcusb.h ++ * ++ * Implementation of a ipc driver based Intel's Bulverde USB Host ++ * Controller. ++ * ++ * Copyright (C) 2003-2005 Motorola ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * 2003-Nov-18 - (Motorola) created ++ * ++ */ ++extern struct tty_driver *usb_for_mux_driver; ++extern struct tty_struct *usb_for_mux_tty; ++extern void (*usb_mux_dispatcher)(struct tty_struct *tty); ++extern void (*usb_mux_sender)(void); diff --git a/packages/linux/linux-ezx-2.6.23/patches/mux_debug.patch b/packages/linux/linux-ezx-2.6.23/patches/mux_debug.patch new file mode 100644 index 0000000000..58cb25a0b6 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/mux_debug.patch @@ -0,0 +1,551 @@ +Index: linux-2.6.20.7/drivers/char/ts0710_mux.c +=================================================================== +--- linux-2.6.20.7.orig/drivers/char/ts0710_mux.c 2007-04-22 12:24:18.000000000 +0200 ++++ linux-2.6.20.7/drivers/char/ts0710_mux.c 2007-04-22 12:26:47.000000000 +0200 +@@ -85,6 +85,9 @@ + #include "ts0710.h" + #include "ts0710_mux.h" + ++#define TS0710DEBUG ++#define PRINT_OUTPUT_PRINTK ++ + #define TS0710MUX_GPRS_SESSION_MAX 2 + #define TS0710MUX_MAJOR 250 + #define TS0710MUX_MINOR_START 0 +@@ -316,7 +319,7 @@ + #ifdef TS0710DEBUG + + #ifdef PRINT_OUTPUT_PRINTK +-#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX " __FUNCTION__ ": " fmt "\n" , ## arg) ++#define TS0710_DEBUG(fmt, arg...) printk(KERN_INFO "MUX %s: " fmt "\n" , __func__, ## arg) + #else + #include "ezxlog.h" + static __u8 strDebug[256]; +@@ -530,10 +533,10 @@ + if (strncmp(p->comm, "aplogd", 6) == 0) { + sig = 1; + if (send_sig(SIGUSR2, p, 1) == 0) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX: success to send SIGUSR2 to aplogd!\n"); + } else { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX: failure to send SIGUSR2 to aplogd!\n"); + } + break; +@@ -542,7 +545,7 @@ + read_unlock(&tasklist_lock); + + if (!sig) { +- TS0710_PRINTK("MUX: not found aplogd!\n"); ++ TS0710_DEBUG("MUX: not found aplogd!\n"); + } + } + #else +@@ -559,11 +562,11 @@ + buf[len + 1] = TS0710_BASIC_FLAG; + + if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX basic_write: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n"); + + #ifndef USB_FOR_MUX +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX basic_write: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n"); + TS0710_SIG2APLOGD(); + #endif +@@ -577,7 +580,7 @@ + res = COMM_FOR_MUX_DRIVER->write(COMM_FOR_MUX_TTY, buf, len + 2); + + if (res != len + 2) { +- TS0710_PRINTK("MUX basic_write: Write Error!\n"); ++ TS0710_DEBUG("MUX basic_write: Write Error!\n"); + return -1; + } + +@@ -601,7 +604,7 @@ + TS0710_DEBUG("crc_check: CRC check OK\n"); + return 0; + } else { +- TS0710_PRINTK("MUX crc_check: CRC check failed\n"); ++ TS0710_DEBUG("MUX crc_check: CRC check failed\n"); + return 1; + } + } +@@ -1266,7 +1269,7 @@ + break; + + case FCON: /*Flow control on command */ +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Received Flow control(all channels) on command\n"); + if (mcc_short_pkt->h.type.cr == MCC_CMD) { + ts0710->dlci[0].state = CONNECTED; +@@ -1276,7 +1279,7 @@ + break; + + case FCOFF: /*Flow control off command */ +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Received Flow control(all channels) off command\n"); + if (mcc_short_pkt->h.type.cr == MCC_CMD) { + for (j = 0; j < TS0710_MAX_CHN; j++) { +@@ -1823,7 +1826,7 @@ + TS0710_DEBUG("UIH on channel %d\n", dlci); + + if (uih_len > ts0710->dlci[dlci].mtu) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: DLCI:%d, uih_len:%d is bigger than mtu:%d, discard data!\n", + dlci, uih_len, ts0710->dlci[dlci].mtu); + break; +@@ -1844,7 +1847,7 @@ + dlci, tty_idx); + TS0710_DEBUGSTR(uih_data_start, uih_len); + if (!(iscmdtty[tty_idx])) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: %s: Wrong CMDTAG on DLCI:%d, /dev/mux%d\n", + __FUNCTION__, dlci, tty_idx); + } +@@ -1856,7 +1859,7 @@ + ("NON-CMDTAG on DLCI:%d, /dev/mux%d\n", + dlci, tty_idx); + if (iscmdtty[tty_idx]) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: %s: Wrong NON-CMDTAG on DLCI:%d, /dev/mux%d\n", + __FUNCTION__, dlci, tty_idx); + } +@@ -1864,13 +1867,14 @@ + } + tty = mux_table[tty_idx]; + if ((!mux_tty[tty_idx]) || (!tty)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX: No application waiting for, discard it! /dev/mux%d\n", + tty_idx); ++ TS0710_DEBUG("MUX: mux_tty[%d] = %d, tty is at %i", tty_idx, mux_tty[tty_idx], tty); + } else { /* Begin processing received data */ + if ((!mux_recv_info_flags[tty_idx]) + || (!mux_recv_info[tty_idx])) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: No mux_recv_info, discard it! /dev/mux%d\n", + tty_idx); + break; +@@ -1878,7 +1882,7 @@ + + recv_info = mux_recv_info[tty_idx]; + if (recv_info->total > 8192) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX : discard data for tty_idx:%d, recv_info->total > 8192 \n", + tty_idx); + break; +@@ -1949,7 +1953,7 @@ + get_mux_recv_packet + (uih_len); + if (!recv_packet) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX %s: no memory\n", + __FUNCTION__); + break; +@@ -1980,7 +1984,7 @@ + } else { /* recv_info->total == 0 */ + if (uih_len > + TS0710MUX_RECV_BUF_SIZE) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: tty_idx:%d, uih_len == %d is too big\n", + tty_idx, uih_len); + uih_len = +@@ -2120,12 +2124,12 @@ + if (ts0710->dlci[dlci].state == DISCONNECTED) { + break; + } else if (signal_pending(current)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI %d Send DISC got signal!\n", + dlci); + break; + } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI %d Send DISC timeout!\n", dlci); + continue; + } +@@ -2158,7 +2162,7 @@ + return 0; + } else if (ts0710->dlci[0].state == CONNECTING) { + /* Reentry */ +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI: 0, reentry to open DLCI 0, pid: %d, %s !\n", + current->pid, current->comm); + try = 11; +@@ -2179,13 +2183,13 @@ + DISCONNECTED) { + break; + } else if (signal_pending(current)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Wait for connecting got signal!\n", + dlci); + retval = -EAGAIN; + break; + } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Wait for connecting timeout!\n", + dlci); + continue; +@@ -2199,7 +2203,7 @@ + } + } else if ((ts0710->dlci[0].state != DISCONNECTED) + && (ts0710->dlci[0].state != REJECTED)) { +- TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci); ++ TS0710_DEBUG("MUX DLCI:%d state is invalid!\n", dlci); + return retval; + } else { + ts0710->initiator = 1; +@@ -2218,19 +2222,19 @@ + retval = 0; + break; + } else if (ts0710->dlci[0].state == REJECTED) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send SABM got rejected!\n", + dlci); + retval = -EREJECTED; + break; + } else if (signal_pending(current)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send SABM got signal!\n", + dlci); + retval = -EAGAIN; + break; + } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send SABM timeout!\n", + dlci); + continue; +@@ -2271,13 +2275,13 @@ + DISCONNECTED) { + break; + } else if (signal_pending(current)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Wait for connecting got signal!\n", + dlci); + retval = -EAGAIN; + break; + } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Wait for connecting timeout!\n", + dlci); + continue; +@@ -2296,7 +2300,7 @@ + } + } else if ((ts0710->dlci[dlci].state != DISCONNECTED) + && (ts0710->dlci[dlci].state != REJECTED)) { +- TS0710_PRINTK("MUX DLCI:%d state is invalid!\n", dlci); ++ TS0710_DEBUG("MUX DLCI:%d state is invalid!\n", dlci); + return retval; + } else { + ts0710->dlci[dlci].state = NEGOTIATING; +@@ -2313,13 +2317,13 @@ + if (ts0710->dlci[dlci].state == CONNECTING) { + break; + } else if (signal_pending(current)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send pn_msg got signal!\n", + dlci); + retval = -EAGAIN; + break; + } else if ((jiffies - t) >= TS0710MUX_TIME_OUT) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send pn_msg timeout!\n", + dlci); + continue; +@@ -2344,20 +2348,20 @@ + break; + } else if (ts0710->dlci[dlci].state == + REJECTED) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send SABM got rejected!\n", + dlci); + retval = -EREJECTED; + break; + } else if (signal_pending(current)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send SABM got signal!\n", + dlci); + retval = -EAGAIN; + break; + } else if ((jiffies - t) >= + TS0710MUX_TIME_OUT) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX DLCI:%d Send SABM timeout!\n", + dlci); + continue; +@@ -2468,7 +2472,7 @@ + schedule_work(&send_tqueue); + #else + if (!tq_serial_for_mux) { +- TS0710_PRINTK("MUX Error: %s: tq_serial_for_mux == 0\n", ++ TS0710_DEBUG("MUX Error: %s: tq_serial_for_mux == 0\n", + __FUNCTION__); + return; + } +@@ -2508,7 +2512,7 @@ + if ((mux_tty[cmdtty] == 0) && (mux_tty[datatty] == 0)) { + if (dlci == 1) { + ts0710_close_channel(0); +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX mux_close: tapisrv might be down!!! Close DLCI 1\n"); + TS0710_SIG2APLOGD(); + } +@@ -2673,12 +2677,12 @@ + UNUSED_PARAM(tty); + + if ((COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", + __FUNCTION__); + + #ifndef USB_FOR_MUX +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", + __FUNCTION__); + TS0710_SIG2APLOGD(); +@@ -2724,14 +2728,14 @@ + } else if (ts0710->dlci[dlci].state == CONNECTED) { + + if (!(mux_send_info_flags[line])) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: mux_write: mux_send_info_flags[%d] == 0\n", + line); + return -ENODEV; + } + send_info = mux_send_info[line]; + if (!send_info) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: mux_write: mux_send_info[%d] == 0\n", + line); + return -ENODEV; +@@ -2800,7 +2804,7 @@ + } + return c; + } else { +- TS0710_PRINTK("MUX mux_write: DLCI %d not connected\n", dlci); ++ TS0710_DEBUG("MUX mux_write: DLCI %d not connected\n", dlci); + return -EDISCONNECTED; + } + } +@@ -2940,7 +2944,7 @@ + return; + } + +- TS0710_PRINTK("MUX %s: line is:%d\n", __FUNCTION__, line); ++ TS0710_DEBUG("MUX %s: line is:%d\n", __FUNCTION__, line); + + if ((mux_send_info_flags[line]) + && (mux_send_info[line]) +@@ -2960,10 +2964,10 @@ + + /* + if( (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0) ) { +- TS0710_PRINTK("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__); ++ TS0710_DEBUG("MUX %s: (COMM_FOR_MUX_DRIVER == 0) || (COMM_FOR_MUX_TTY == 0)\n", __FUNCTION__); + + #ifndef USB_FOR_MUX +- TS0710_PRINTK("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__); ++ TS0710_DEBUG("MUX %s: tapisrv might be down!!! (serial_for_mux_driver == 0) || (serial_for_mux_tty == 0)\n", __FUNCTION__); + TS0710_SIG2APLOGD(); + #endif + +@@ -2989,9 +2993,9 @@ + if ((COMM_FOR_MUX_DRIVER == NULL) || (COMM_FOR_MUX_TTY == NULL)) { + + #ifdef USB_FOR_MUX +- TS0710_PRINTK("MUX: please install and open IPC-USB first\n"); ++ TS0710_DEBUG("MUX: please install and open IPC-USB first\n"); + #else +- TS0710_PRINTK("MUX: please install and open ttyS0 first\n"); ++ TS0710_DEBUG("MUX: please install and open ttyS0 first\n"); + #endif + + goto out; +@@ -3016,7 +3020,7 @@ + /* if( dlci == 1 ) { */ + /* Open server channel 0 first */ + if ((retval = ts0710_open_channel(0)) != 0) { +- TS0710_PRINTK("MUX: Can't connect server channel 0!\n"); ++ TS0710_DEBUG("MUX: Can't connect server channel 0!\n"); + ts0710_init(); + + mux_tty[line]--; +@@ -3073,7 +3077,7 @@ + datatty = dlci2tty[dlci].datatty; + if ((mux_tty[cmdtty] > 0) || (mux_tty[datatty] > 0)) { + if ((retval = ts0710_open_channel(dlci)) != 0) { +- TS0710_PRINTK("MUX: Can't connected channel %d!\n", ++ TS0710_DEBUG("MUX: Can't connected channel %d!\n", + dlci); + ts0710_reset_dlci(dlci); + +@@ -3096,6 +3100,7 @@ + retval = 0; + #endif + out: ++ TS0710_DEBUG("returning %d for open of /dev/mux%d (mux_tty[%d] = %d", retval, line, line, mux_tty[line]); + return retval; + } + +@@ -3178,12 +3183,12 @@ + + while (1) { + tbuf_free = TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf); +- TS0710_PRINTK("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free); ++ TS0710_DEBUG("Reading max %i bytes from ts0710_mux_usb inbuf.\n", tbuf_free); + tbuf_read = get_from_inbuf_list(tbuf_ptr, tbuf_free); + if (tbuf_read == 0) { + break; + } else { +- TS0710_PRINTK("Read %i bytes.\n", tbuf_read); ++ TS0710_DEBUG("Read %i bytes.\n", tbuf_read); + }; + tbuf_ptr += tbuf_read; + }; +@@ -3192,7 +3197,7 @@ + + // Should be impossible? + //if (count > (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf))) { +- // TS0710_PRINTK ++ // TS0710_DEBUG + // ("MUX receive_worker: !!!!! Exceed buffer boundary !!!!!\n"); + // count = (TS0710MUX_MAX_BUF_SIZE - (tbuf_ptr - tbuf)); + //} +@@ -3264,7 +3269,7 @@ + TS0710_LOGSTR_FRAME(0, start_flag, + (tbuf_ptr - + start_flag)); +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: %s: frame length:%d is bigger than Max total frame size:%d\n", + /*__FUNCTION__, framelen, TS0710MUX_MAX_TOTAL_FRAME_SIZE);*/ + __FUNCTION__, framelen, (TS0710MUX_MAX_TOTAL_FRAME_SIZE + SEQ_FIELD_SIZE)); /*For BP UART problem */ +@@ -3389,7 +3394,7 @@ + *(uih_data_start + + uih_len) = + 0; +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX bp log: %s\n", + uih_data_start); + } +@@ -3415,7 +3420,7 @@ + TS0710_LOGSTR_FRAME(0, start_flag, + framelen); + TS0710_DEBUGHEX(start_flag, framelen); +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX: Lost synchronization!\n"); + search = start_flag + 1; + } +@@ -3476,7 +3481,7 @@ + recv_info2 = recv_info->next; + + if (!(recv_info->total)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: %s: Should not get here, recv_info->total == 0 \n", + __FUNCTION__); + continue; +@@ -3486,7 +3491,7 @@ + dlci = tty2dlci[tty_idx]; + tty = mux_table[tty_idx]; + if ((!mux_tty[tty_idx]) || (!tty)) { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX: No application waiting for, free recv_info! tty_idx:%d\n", + tty_idx); + mux_recv_info_flags[tty_idx] = 0; +@@ -3560,7 +3565,7 @@ + recv_info->total -= recv_packet->length; + free_mux_recv_packet(recv_packet); + } else { +- TS0710_PRINTK ++ TS0710_DEBUG + ("MUX Error: %s: Should not get here, recv_info->total is:%u \n", + __FUNCTION__, recv_info->total); + } +@@ -3760,7 +3765,7 @@ + int ret; + + if (idx > TS0710MUX_COUNT_MAX_IDX) { +- TS0710_PRINTK("MUX get_count: invalid idx: %d!\n", idx); ++ TS0710_DEBUG("MUX get_count: invalid idx: %d!\n", idx); + return -1; + } + +@@ -3774,11 +3779,11 @@ + static int set_count(__u8 idx, int count) + { + if (idx > TS0710MUX_COUNT_MAX_IDX) { +- TS0710_PRINTK("MUX set_count: invalid idx: %d!\n", idx); ++ TS0710_DEBUG("MUX set_count: invalid idx: %d!\n", idx); + return -1; + } + if (count < 0) { +- TS0710_PRINTK("MUX set_count: invalid count: %d!\n", count); ++ TS0710_DEBUG("MUX set_count: invalid count: %d!\n", count); + return -1; + } + +@@ -3792,11 +3797,11 @@ + static int add_count(__u8 idx, int count) + { + if (idx > TS0710MUX_COUNT_MAX_IDX) { +- TS0710_PRINTK("MUX add_count: invalid idx: %d!\n", idx); ++ TS0710_DEBUG("MUX add_count: invalid idx: %d!\n", idx); + return -1; + } + if (count <= 0) { +- TS0710_PRINTK("MUX add_count: invalid count: %d!\n", count); ++ TS0710_DEBUG("MUX add_count: invalid count: %d!\n", count); + return -1; + } + +Index: linux-2.6.20.7/drivers/char/ts0710_mux_usb.c +=================================================================== +--- linux-2.6.20.7.orig/drivers/char/ts0710_mux_usb.c 2007-04-22 12:26:47.000000000 +0200 ++++ linux-2.6.20.7/drivers/char/ts0710_mux_usb.c 2007-04-22 12:26:47.000000000 +0200 +@@ -72,7 +72,8 @@ + #define IPC_USB_PROBE_NOT_READY 4 + #define DBG_MAX_BUF_SIZE 1024 + #define ICL_EVENT_INTERVAL (HZ) +-#undef BVD_DEBUG ++ ++#define BVD_DEBUG + + #define IS_EP_BULK(ep) ((ep).bmAttributes == USB_ENDPOINT_XFER_BULK ? 1 : 0) + #define IS_EP_BULK_IN(ep) (IS_EP_BULK(ep) && ((ep).bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) diff --git a/packages/linux/linux-ezx-2.6.23/patches/patch-2.6.23.1 b/packages/linux/linux-ezx-2.6.23/patches/patch-2.6.23.1 new file mode 100644 index 0000000000..5027b85ad4 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/patch-2.6.23.1 @@ -0,0 +1,108 @@ +diff --git a/Makefile b/Makefile +index 4635a64..c244a02 100644 +--- a/Makefile ++++ b/Makefile +@@ -1,7 +1,7 @@ + VERSION = 2 + PATCHLEVEL = 6 + SUBLEVEL = 23 +-EXTRAVERSION = ++EXTRAVERSION = .1 + NAME = Arr Matey! A Hairy Bilge Rat! + + # *DOCUMENTATION* +diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c +index cb7dec9..d9832e2 100644 +--- a/drivers/ata/sata_mv.c ++++ b/drivers/ata/sata_mv.c +@@ -69,10 +69,11 @@ + #include <linux/device.h> + #include <scsi/scsi_host.h> + #include <scsi/scsi_cmnd.h> ++#include <scsi/scsi_device.h> + #include <linux/libata.h> + + #define DRV_NAME "sata_mv" +-#define DRV_VERSION "1.0" ++#define DRV_VERSION "1.01" + + enum { + /* BAR's are enumerated in terms of pci_resource_start() terms */ +@@ -420,6 +421,7 @@ static void mv_error_handler(struct ata_port *ap); + static void mv_post_int_cmd(struct ata_queued_cmd *qc); + static void mv_eh_freeze(struct ata_port *ap); + static void mv_eh_thaw(struct ata_port *ap); ++static int mv_slave_config(struct scsi_device *sdev); + static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + + static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, +@@ -457,7 +459,7 @@ static struct scsi_host_template mv5_sht = { + .use_clustering = 1, + .proc_name = DRV_NAME, + .dma_boundary = MV_DMA_BOUNDARY, +- .slave_configure = ata_scsi_slave_config, ++ .slave_configure = mv_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + }; +@@ -475,7 +477,7 @@ static struct scsi_host_template mv6_sht = { + .use_clustering = 1, + .proc_name = DRV_NAME, + .dma_boundary = MV_DMA_BOUNDARY, +- .slave_configure = ata_scsi_slave_config, ++ .slave_configure = mv_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + }; +@@ -763,6 +765,17 @@ static void mv_irq_clear(struct ata_port *ap) + { + } + ++static int mv_slave_config(struct scsi_device *sdev) ++{ ++ int rc = ata_scsi_slave_config(sdev); ++ if (rc) ++ return rc; ++ ++ blk_queue_max_phys_segments(sdev->request_queue, MV_MAX_SG_CT / 2); ++ ++ return 0; /* scsi layer doesn't check return value, sigh */ ++} ++ + static void mv_set_edma_ptrs(void __iomem *port_mmio, + struct mv_host_priv *hpriv, + struct mv_port_priv *pp) +@@ -1130,10 +1143,9 @@ static void mv_port_stop(struct ata_port *ap) + * LOCKING: + * Inherited from caller. + */ +-static unsigned int mv_fill_sg(struct ata_queued_cmd *qc) ++static void mv_fill_sg(struct ata_queued_cmd *qc) + { + struct mv_port_priv *pp = qc->ap->private_data; +- unsigned int n_sg = 0; + struct scatterlist *sg; + struct mv_sg *mv_sg; + +@@ -1151,7 +1163,7 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc) + + mv_sg->addr = cpu_to_le32(addr & 0xffffffff); + mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); +- mv_sg->flags_size = cpu_to_le32(len); ++ mv_sg->flags_size = cpu_to_le32(len & 0xffff); + + sg_len -= len; + addr += len; +@@ -1160,12 +1172,9 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc) + mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + + mv_sg++; +- n_sg++; + } + + } +- +- return n_sg; + } + + static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) diff --git a/packages/linux/linux-ezx-2.6.23/patches/pcap-ts.patch b/packages/linux/linux-ezx-2.6.23/patches/pcap-ts.patch new file mode 100644 index 0000000000..5891ccb837 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/pcap-ts.patch @@ -0,0 +1,363 @@ +Index: linux-2.6.23/drivers/input/touchscreen/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/input/touchscreen/Kconfig 2007-10-10 09:38:44.000000000 +0200 ++++ linux-2.6.23/drivers/input/touchscreen/Kconfig 2007-10-22 22:25:02.000000000 +0200 +@@ -238,4 +238,13 @@ + bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + ++config TOUCHSCREEN_PCAP ++ tristate "Motorola PCAP touchscreen" ++ depends on EZX_PCAP ++ help ++ Say Y here if you have a Motorola EZX telephone and ++ want to support the built-in touchscreen. ++ ++ If unsure, say N. ++ + endif +Index: linux-2.6.23/drivers/input/touchscreen/pcap_ts.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/input/touchscreen/pcap_ts.c 2007-10-22 22:25:02.000000000 +0200 +@@ -0,0 +1,331 @@ ++/* ++ * pcap_ts.c - Touchscreen driver for Motorola PCAP2 based touchscreen as found ++ * in the EZX phone platform. ++ * ++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org> ++ * Copyright (C) 2007 Daniel Ribeiro <drwyrm@gmail.com> ++ * ++ * Based on information found in the original Motorola 2.4.x ezx-ts.c driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * TODO: ++ * split this in a hardirq handler and a tasklet/bh ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/fs.h> ++#include <linux/string.h> ++#include <linux/pm.h> ++#include <linux/timer.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/input.h> ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/ezx-pcap.h> ++ ++#if 0 ++#define DEBUGP(x, args ...) printk(x, ## args) ++#else ++#define DEBUGP(x, args ...) ++#endif ++ ++#define POSITION_X_MEASUREMENT 0 ++#define POSITION_XY_MEASUREMENT 1 ++#define PRESSURE_MEASUREMENT 2 ++#define PLATE_X_MEASUREMENT 3 ++#define PLATE_Y_MEASUREMENT 4 ++#define STANDBY_MODE 5 ++#define NONTS_MODE 6 ++ ++struct pcap_ts { ++ int irq_xy; ++ int irq_touch; ++ struct input_dev *input; ++ struct timer_list timer; ++ u_int16_t x, y; ++ u_int16_t pressure; ++ u_int8_t read_state; ++}; ++ ++#define X_AXIS_MIN 0 ++#define X_AXIS_MAX 1023 ++ ++#define Y_AXIS_MAX X_AXIS_MAX ++#define Y_AXIS_MIN X_AXIS_MIN ++ ++#define PRESSURE_MAX X_AXIS_MAX ++#define PRESSURE_MIN X_AXIS_MIN ++ ++/* if we try to read faster, pressure reading becomes unreliable */ ++#define SAMPLE_INTERVAL (HZ/50) ++ ++ ++static void pcap_ts_mode(struct pcap_ts *pcap_ts, u_int32_t mode) ++{ ++ u_int32_t tmp; ++ ++ pcap_ts->read_state = mode; ++ ezx_pcap_read(PCAP_REG_ADC1, &tmp); ++ tmp &= ~PCAP_ADC1_TS_M_MASK; ++ tmp |= ((mode << PCAP_ADC1_TS_M_SHIFT) & PCAP_ADC1_TS_M_MASK); ++ ezx_pcap_write(PCAP_REG_ADC1, tmp); ++} ++ ++/* issue a XY read command to the ADC of PCAP2. Well get an ADCDONE interrupt ++ * once the result of the conversion is available */ ++static void pcap_ts_start_xy_read(struct pcap_ts *pcap_ts) ++{ ++ u_int32_t tmp; ++ ++ ezx_pcap_read(PCAP_REG_ADC1, &tmp); ++ tmp &= ~(PCAP_BIT_ADC1_RAND | PCAP_ADC1_ADA1_MASK | ++ PCAP_ADC1_ADA2_MASK); ++ tmp |= (PCAP_BIT_ADC1_ADEN | PCAP_BIT_ADC1_AD_SEL1 | ++ PCAP_BIT_ADC1_AD_SEL2 | (5 << PCAP_ADC1_ADA1_SHIFT) | ++ (3 << PCAP_ADC1_ADA2_SHIFT)); ++ ezx_pcap_write(PCAP_REG_ADC1, tmp); ++ ezx_pcap_bit_set(PCAP_BIT_ADC2_ASC, 1); ++} ++ ++/* read the XY result from the ADC of PCAP2 */ ++static void pcap_ts_get_xy_value(struct pcap_ts *pcap_ts) ++{ ++ u_int32_t tmp; ++ ++ ezx_pcap_read(PCAP_REG_ADC2, &tmp); ++ ++ if (pcap_ts->read_state == POSITION_XY_MEASUREMENT) { ++ pcap_ts->x = (tmp & PCAP_ADC2_ADD1_MASK) >> ++ PCAP_ADC2_ADD1_SHIFT; ++ pcap_ts->y = (tmp & PCAP_ADC2_ADD2_MASK) >> ++ PCAP_ADC2_ADD2_SHIFT; ++ } else { ++ pcap_ts->pressure = (tmp & PCAP_ADC2_ADD2_MASK) >> ++ PCAP_ADC2_ADD2_SHIFT; ++ } ++} ++ ++/* PCAP2 interrupts us when ADC conversion result is available */ ++static irqreturn_t pcap_ts_irq_xy(int irq, void *dev_id) ++{ ++ struct pcap_ts *pcap_ts = dev_id; ++ ++ pcap_ts_get_xy_value(pcap_ts); ++ DEBUGP(KERN_DEBUG "%s X=%4d, Y=%4d Z=%4d ", ++ pcap_ts->read_state == POSITION_XY_MEASUREMENT ? "COORD" : ++ "PRESS", pcap_ts->x, pcap_ts->y, pcap_ts->pressure); ++ switch (pcap_ts->read_state) { ++ case PRESSURE_MEASUREMENT: ++ if (pcap_ts->pressure >= PRESSURE_MAX || ++ pcap_ts->pressure <= PRESSURE_MIN ) { ++ /* pen has been released (or cant read pressure - WM)*/ ++ DEBUGP("UP\n"); ++ /* do nothing */ ++ } else { ++ /* pen has been touched down */ ++ DEBUGP("DOWN\n"); ++ input_report_key(pcap_ts->input, BTN_TOUCH, 1); ++ input_report_abs(pcap_ts->input, ABS_PRESSURE, pcap_ts->pressure); ++ } ++ /* switch state machine into coordinate read mode */ ++ pcap_ts_mode(pcap_ts, POSITION_XY_MEASUREMENT); ++ pcap_ts_start_xy_read(pcap_ts); ++ break; ++ case POSITION_XY_MEASUREMENT: ++ if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX || ++ pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) { ++ /* pen has been released */ ++ DEBUGP("UP END\n"); ++ ++ input_report_key(pcap_ts->input, BTN_TOUCH, 0); ++ input_report_abs(pcap_ts->input, ABS_PRESSURE, 0); ++ ++ /* no need for timer, we'll get interrupted with ++ * next touch down event */ ++ del_timer(&pcap_ts->timer); ++ ++ /* ask PCAP2 to interrupt us if touch event happens ++ * again */ ++ pcap_ts_mode(pcap_ts, STANDBY_MODE); ++ enable_irq(pcap_ts->irq_touch); ++ } else { ++ DEBUGP("DOWN\n"); ++ input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x); ++ input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y); ++ ++ /* switch back to pressure read mode */ ++ pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT); ++ mod_timer(&pcap_ts->timer, jiffies + SAMPLE_INTERVAL); ++ } ++ input_sync(pcap_ts->input); ++ break; ++ default: ++ DEBUGP("ERROR\n"); ++ break; ++ } ++ return IRQ_HANDLED; ++} ++ ++/* PCAP2 interrupts us if the pen touches down (interrupts also on pen up - WM)*/ ++static irqreturn_t pcap_ts_irq_touch(int irq, void *dev_id) ++{ ++ struct pcap_ts *pcap_ts = dev_id; ++ /* mask Touchscreen interrupt bit, prevents further touch events ++ * from being reported to us until we're finished with reading ++ * both pressure and x/y from ADC */ ++ disable_irq(pcap_ts->irq_touch); ++ ++ DEBUGP("touched!!\n"); ++ pcap_ts_mode(pcap_ts, PRESSURE_MEASUREMENT); ++ pcap_ts_start_xy_read(pcap_ts); ++ return IRQ_HANDLED; ++} ++ ++static void pcap_ts_timer_fn(unsigned long data) ++{ ++ struct pcap_ts *pcap_ts = (struct pcap_ts *) data; ++ ++ pcap_ts_start_xy_read(pcap_ts); ++} ++ ++static int __init ezxts_probe(struct platform_device *pdev) ++{ ++ struct pcap_ts *pcap_ts; ++ struct input_dev *input_dev; ++ int err = -ENOMEM; ++ ++ pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL); ++ input_dev = input_allocate_device(); ++ if (!pcap_ts || !input_dev) ++ goto fail; ++ ++ pcap_ts->irq_xy = platform_get_irq(pdev, 0); ++ if (pcap_ts->irq_xy < 0) { ++ err = pcap_ts->irq_xy; ++ goto fail; ++ } ++ ++ pcap_ts->irq_touch = platform_get_irq(pdev, 1); ++ if (pcap_ts->irq_touch < 0) { ++ err = pcap_ts->irq_touch; ++ goto fail; ++ } ++ ++ ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REFENB, 0); ++ pcap_ts_mode(pcap_ts, STANDBY_MODE); ++ ++ err = request_irq(pcap_ts->irq_xy, pcap_ts_irq_xy, IRQF_DISABLED, ++ "pcap-ts X/Y", pcap_ts); ++ if (err < 0) { ++ printk(KERN_ERR "pcap_ts: can't grab xy irq %d: %d\n", ++ pcap_ts->irq_xy, err); ++ goto fail; ++ } ++ ++ err = request_irq(pcap_ts->irq_touch, pcap_ts_irq_touch, IRQF_DISABLED, ++ "pcap-ts touch", pcap_ts); ++ if (err < 0) { ++ printk(KERN_ERR "pcap_ts: can't grab touch irq %d: %d\n", ++ pcap_ts->irq_touch, err); ++ goto fail_xy; ++ } ++ ++ pcap_ts->input = input_dev; ++ init_timer(&pcap_ts->timer); ++ pcap_ts->timer.data = (unsigned long) pcap_ts; ++ pcap_ts->timer.function = &pcap_ts_timer_fn; ++ ++ platform_set_drvdata(pdev, pcap_ts); ++ ++ input_dev->name = "pcap-touchscreen"; ++ input_dev->phys = "ezxts/input0"; ++ input_dev->id.bustype = BUS_HOST; ++ input_dev->id.vendor = 0x0001; ++ input_dev->id.product = 0x0002; ++ input_dev->id.version = 0x0100; ++ input_dev->cdev.dev = &pdev->dev; ++ input_dev->private = pcap_ts; ++ ++ input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); ++ input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); ++ input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0); ++ input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0); ++ input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN, ++ PRESSURE_MAX, 0, 0); ++ ++ input_register_device(pcap_ts->input); ++ ++ return 0; ++ ++fail_xy: ++ free_irq(pcap_ts->irq_xy, pcap_ts); ++fail: ++ input_free_device(input_dev); ++ kfree(pcap_ts); ++ ++ return err; ++} ++ ++static int ezxts_remove(struct platform_device *pdev) ++{ ++ struct pcap_ts *pcap_ts = platform_get_drvdata(pdev); ++ ++ del_timer_sync(&pcap_ts->timer); ++ ++ free_irq(pcap_ts->irq_touch, pcap_ts); ++ free_irq(pcap_ts->irq_xy, pcap_ts); ++ ++ input_unregister_device(pcap_ts->input); ++ kfree(pcap_ts); ++ ++ return 0; ++} ++ ++static int ezxts_suspend(struct platform_device *dev, pm_message_t state) ++{ ++ ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 1); ++ return 0; ++} ++ ++static int ezxts_resume(struct platform_device *dev) ++{ ++ ezx_pcap_bit_set(PCAP_BIT_ADC1_TS_REF_LOWPWR, 0); ++ /* just in case we suspend with TSI masked. */ ++// ezx_pcap_bit_set(PCAP_BIT_MSR_TSM, 0); ++ return 0; ++} ++ ++ ++static struct platform_driver ezxts_driver = { ++ .probe = ezxts_probe, ++ .remove = ezxts_remove, ++ .suspend = ezxts_suspend, ++ .resume = ezxts_resume, ++ .driver = { ++ .name = "pcap-ts", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ezxts_init(void) ++{ ++ return platform_driver_register(&ezxts_driver); ++} ++ ++static void __exit ezxts_exit(void) ++{ ++ platform_driver_unregister(&ezxts_driver); ++} ++ ++module_init(ezxts_init); ++module_exit(ezxts_exit); ++ ++MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver"); ++MODULE_AUTHOR("Harald Welte <laforge@openezx.org>"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/drivers/input/touchscreen/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/input/touchscreen/Makefile 2007-10-10 09:38:44.000000000 +0200 ++++ linux-2.6.23/drivers/input/touchscreen/Makefile 2007-10-22 22:25:02.000000000 +0200 +@@ -18,3 +18,4 @@ + obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o + obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o + obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o ++obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o diff --git a/packages/linux/linux-ezx-2.6.23/patches/pxa-kbd.patch b/packages/linux/linux-ezx-2.6.23/patches/pxa-kbd.patch new file mode 100644 index 0000000000..a824b87a19 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/pxa-kbd.patch @@ -0,0 +1,545 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/generic.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/generic.c 2007-10-23 23:04:39.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/generic.c 2007-10-23 23:04:42.000000000 +0200 +@@ -42,6 +42,7 @@ + #include <asm/arch/mmc.h> + #include <asm/arch/irda.h> + #include <asm/arch/i2c.h> ++#include <asm/arch/kbd.h> + + #include "devices.h" + #include "generic.h" +@@ -413,3 +414,28 @@ + .name = "sa1100-rtc", + .id = -1, + }; ++ ++static struct resource pxa_kbd_resources[] = { ++ { ++ .start = IRQ_KEYPAD, ++ .end = IRQ_KEYPAD, ++ .flags = IORESOURCE_IRQ, ++ }, { ++ .start = 0x41500000, ++ .end = 0x4150004c, ++ .flags = IORESOURCE_MEM, ++ }, ++}; ++ ++struct platform_device pxa_device_kbd = { ++ .name = "pxa-keyboard", ++ .id = -1, ++ .resource = pxa_kbd_resources, ++ .num_resources = ARRAY_SIZE(pxa_kbd_resources), ++}; ++ ++void __init pxa_set_kbd_info(struct pxakbd_platform_data *info) ++{ ++ pxa_device_kbd.dev.platform_data = info; ++} ++ +Index: linux-2.6.23/drivers/input/keyboard/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/input/keyboard/Kconfig 2007-10-23 23:04:39.000000000 +0200 ++++ linux-2.6.23/drivers/input/keyboard/Kconfig 2007-10-23 23:04:42.000000000 +0200 +@@ -253,4 +253,11 @@ + To compile this driver as a module, choose M here: the + module will be called gpio-keys. + ++config KEYBOARD_PXA ++ tristate "Intel PXA keyboard support" ++ depends on ARCH_PXA ++ help ++ This add support for a driver of the Intel PXA2xx keyboard ++ controller. ++ + endif +Index: linux-2.6.23/drivers/input/keyboard/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/input/keyboard/Makefile 2007-10-23 23:04:39.000000000 +0200 ++++ linux-2.6.23/drivers/input/keyboard/Makefile 2007-10-23 23:04:42.000000000 +0200 +@@ -21,4 +21,4 @@ + obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o + obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o + obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o +- ++obj-$(CONFIG_KEYBOARD_PXA) += pxakbd.o +Index: linux-2.6.23/include/asm-arm/arch-pxa/kbd.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/kbd.h 2007-10-23 23:04:42.000000000 +0200 +@@ -0,0 +1,28 @@ ++/* ++ * kbd_pxa.h ++ * ++ * Copyright (C) 2006 Harald Welte <laforge@openezx.org> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef _KBD_PXA_H_ ++#define _KBD_PXA_H_ ++ ++struct pxakbd_platform_data { ++ int (*init)(void); /* init gpio, etc. */ ++ unsigned int scan_interval; ++ struct { ++ unsigned int rows; ++ unsigned int cols; ++ unsigned char *keycode; ++ } matrix; ++ struct { ++ unsigned int num; ++ unsigned char *keycode; ++ } direct; ++}; ++ ++#endif +Index: linux-2.6.23/drivers/input/keyboard/pxakbd.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/input/keyboard/pxakbd.c 2007-10-23 23:04:42.000000000 +0200 +@@ -0,0 +1,403 @@ ++/* ++ * Driver for Motorola EZX phone "keyboard" ++ * ++ * (C) 2006 by Harald Welte <laforge@openezx.org> ++ * ++ * May, 2007 - Daniel Ribeiro <drwyrm@gmail.com> ++ * pm callbacks ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/input.h> ++#include <linux/spinlock.h> ++#include <linux/platform_device.h> ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++ ++#include <asm/arch/kbd.h> ++#include <asm/arch/irqs.h> ++#include <asm/arch/pxa-regs.h> ++ ++#if 0 ++#define DEBUGP(x, args ...) printk(x, ## args) ++#else ++#define DEBUGP(x, args ...) ++#endif ++ ++/* per-keyboard private data structure */ ++struct pxakbd { ++ struct input_dev *input; ++ struct timer_list timer; ++ spinlock_t lock; ++ ++ struct resource *res; ++ unsigned int irq; ++ u_int32_t kpc; ++ u_int32_t kpkdi; ++ ++ struct pxakbd_platform_data *pd; ++}; ++ ++static int pxakbd_scan_direct(struct pxakbd *pxakbd) ++{ ++ u_int32_t kpdk; ++ unsigned int i; ++ int num_pressed = 0; ++ ++ kpdk = KPDK & 0x000000ff; ++ for (i = 0; i < pxakbd->pd->direct.num; i++) { ++ int pressed = 0; ++ ++ if (kpdk & (1 << i)) { ++ pressed = 1; ++ num_pressed++; ++ DEBUGP("pxakbd: pressed: direct %u\n", i); ++ } ++ if (pxakbd->pd->direct.keycode[i] != KEY_RESERVED) { ++ DEBUGP( "pxakbd: sending to input layer: keycode = %d, pressed = %d\n", pxakbd->pd->direct.keycode[i], pressed ); ++ input_report_key(pxakbd->input, pxakbd->pd->direct.keycode[i], ++ pressed); ++ } ++ } ++ return num_pressed; ++} ++ ++/* read the full 8x8 matrix from the PXA27x keypad controller */ ++static inline void __read_matrix(u_int8_t *matrix) ++{ ++ u_int32_t tmp; ++ u_int8_t row; ++ ++ /* Fill the matrix by rows */ ++ ++ tmp = KPASMKP0; ++ for (row=0; row<8; row++) { ++ /* zero the matrix on the first time, then keep ORing */ ++ matrix[row] = ((tmp >> row) & 1); ++ matrix[row] |= ((tmp >> (16 + row)) & 1) << 1; ++ } ++ ++ tmp = KPASMKP1; ++ for (row=0; row<8; row++) { ++ matrix[row] |= ((tmp >> row) & 1) << 2; ++ matrix[row] |= ((tmp >> (16 + row)) & 1) << 3; ++ } ++ ++ tmp = KPASMKP2; ++ for (row=0; row<8; row++) { ++ matrix[row] |= ((tmp >> row) & 1) << 4; ++ matrix[row] |= ((tmp >> (16 + row)) & 1) << 5; ++ } ++ ++ tmp = KPASMKP3; ++ for (row=0; row<8; row++) { ++ matrix[row] |= ((tmp >> row) & 1) << 6; ++ matrix[row] |= ((tmp >> (16 + row)) & 1) << 7; ++ } ++} ++ ++/* compare current matrix with last, generate 'diff' events */ ++static int __cmp_matrix_gen_events(struct pxakbd *pxakbd, u_int8_t *matrix) ++{ ++ unsigned int i; ++ int num_pressed = 0; ++ ++ /* iterate over the matrix */ ++ for (i = 0; i < pxakbd->pd->matrix.rows; i++) { ++ unsigned int j; ++ for (j = 0; j < pxakbd->pd->matrix.cols; j++) { ++ u_int32_t scancode = ++ (i * pxakbd->pd->matrix.cols) + j; ++ int pressed = matrix[i] & (1 << j); ++ ++ if (pressed) { ++ DEBUGP("pxakbd: pressed: %u/%u\n", i, j); ++ num_pressed++; ++ } ++ ++ input_report_key(pxakbd->input, ++ pxakbd->pd->matrix.keycode[scancode], pressed); ++ } ++ } ++ ++ return num_pressed; ++} ++ ++/* scan the matrix keypad */ ++static int pxakbd_scan_matrix(struct pxakbd *pxakbd) ++{ ++ int num_pressed; ++ u_int32_t kpas; ++ u_int8_t matrix[8]; ++ ++ kpas = KPAS; ++ ++ if ((kpas & KPAS_MUKP) == KPAS_MUKP_NONE) { ++ /* no keys pressed */ ++ memset(matrix, 0, sizeof(matrix)); ++ } else if ((kpas & KPAS_MUKP) == KPAS_MUKP_ONE) { ++ /* one key pressed */ ++ u_int8_t row = (kpas & KPAS_RP) >> 4; ++ u_int8_t col = kpas & KPAS_CP; ++ ++ if (row == 0x0f || col == 0x0f) { ++ printk(KERN_WARNING "pxakbd: col or row invalid!\n"); ++ return -1; ++ } ++ ++ /* clear the matrix and set the single pressed key */ ++ memset(matrix, 0, sizeof(matrix)); ++ matrix[row] |= (1 << col); ++ } else { ++ /* multiple keys pressed */ ++ __read_matrix(matrix); ++ } ++ ++ num_pressed = __cmp_matrix_gen_events(pxakbd, matrix); ++ ++ return num_pressed; ++} ++ ++static void pxakbd_timer_callback(unsigned long data) ++{ ++ unsigned long flags; ++ struct pxakbd *pxakbd = (struct pxakbd *) data; ++ unsigned int num_pressed; ++ ++ spin_lock_irqsave(&pxakbd->lock, flags); ++ ++ num_pressed = pxakbd_scan_direct(pxakbd); ++ num_pressed += pxakbd_scan_matrix(pxakbd); ++ ++ spin_unlock_irqrestore(&pxakbd->lock, flags); ++ ++ /* propagate events up the input stack */ ++ input_sync(pxakbd->input); ++} ++ ++static irqreturn_t pxakbd_interrupt(int irq, void *dummy) ++{ ++ struct pxakbd *pxakbd = dummy; ++ u_int32_t kpc; ++ int handled = 0; ++ int num_pressed = 0; ++ ++ /* read and clear interrupt */ ++ kpc = KPC; ++ ++ if (kpc & KPC_DI) { ++ num_pressed += pxakbd_scan_direct(pxakbd); ++ handled = 1; ++ } ++ ++ if (kpc & KPC_MI) { ++ while (KPAS & KPAS_SO) { ++ /* wait for scan to complete beforereading scan regs */ ++ cpu_relax(); ++ } ++ num_pressed += pxakbd_scan_matrix(pxakbd); ++ handled = 1; ++ } ++ ++ /* If any keys are currently pressed, we need to start the timer to detect ++ * key release. */ ++ if (num_pressed) ++ mod_timer(&pxakbd->timer, jiffies + pxakbd->pd->scan_interval); ++ ++ /* propagate events up the input stack */ ++ input_sync(pxakbd->input); ++ ++ return IRQ_RETVAL(handled); ++} ++ ++static int __init pxakbd_probe(struct platform_device *pdev) ++{ ++ struct pxakbd *pxakbd; ++ struct input_dev *input_dev; ++ struct resource *r; ++ int i; ++ int ret = -ENOMEM; ++ ++ int rows, cols, n_direct; ++ ++ if (!pdev->dev.platform_data) { ++ printk(KERN_ERR "pxakbd: platform data not set\n"); ++ ret = -ENODEV; ++ goto out; ++ } ++ ++ pxakbd = kzalloc(sizeof(*pxakbd), GFP_KERNEL); ++ if (!pxakbd) ++ goto out; ++ ++ input_dev = input_allocate_device(); ++ if (!input_dev) ++ goto out_pxa; ++ ++ spin_lock_init(&pxakbd->lock); ++ pxakbd->irq = platform_get_irq(pdev, 0); ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!r || pxakbd->irq == NO_IRQ) { ++ printk(KERN_ERR "pxakbd: invalid resources\n"); ++ ret = -EBUSY; ++ goto out_idev; ++ } ++ ++ pxakbd->input = input_dev; ++ init_timer(&pxakbd->timer); ++ pxakbd->timer.function = pxakbd_timer_callback; ++ pxakbd->timer.data = (unsigned long) pxakbd; ++ pxakbd->pd = pdev->dev.platform_data; ++ pxakbd->res = r; ++ ++ rows = pxakbd->pd->matrix.rows; ++ cols = pxakbd->pd->matrix.cols; ++ n_direct = pxakbd->pd->direct.num; ++ ++ input_dev->name = "pxa-keyboard"; ++ input_dev->phys = "pxakbd/input0"; ++ input_dev->id.bustype = BUS_HOST; ++ input_dev->id.vendor = 0x0001; ++ input_dev->id.product = 0x0001; ++ input_dev->id.version = 0x0001; ++ input_dev->cdev.dev = &pdev->dev; ++ input_dev->private = pxakbd; ++ ++ input_dev->evbit[0] = BIT(EV_KEY)|BIT(EV_REP); ++ ++ input_dev->keycodesize = sizeof(unsigned char); ++ input_dev->keycodemax = (rows*cols)+n_direct; ++ input_dev->keycode = kmalloc(input_dev->keycodemax*input_dev->keycodesize, ++ GFP_KERNEL); ++ if (!input_dev->keycode){ ++ ret = -ENOMEM; ++ goto out_idev; ++ } ++ ++ memcpy(input_dev->keycode, pxakbd->pd->matrix.keycode, rows*cols); ++ ++ memcpy(input_dev->keycode+(rows*cols), ++ pxakbd->pd->direct.keycode, ++ n_direct); ++ ++ for (i = 0; i < rows*cols; i++) ++ set_bit(pxakbd->pd->matrix.keycode[i], input_dev->keybit); ++ ++ for (i = 0; i < n_direct; i++) ++ set_bit(pxakbd->pd->direct.keycode[i], input_dev->keybit); ++ ++ clear_bit(0, input_dev->keybit); ++ ++ if (request_irq(pxakbd->irq, pxakbd_interrupt, 0, "pxakbd", pxakbd)) { ++ printk(KERN_ERR "pxakbd: can't request irq %d\n", pxakbd->irq); ++ ret = -EBUSY; ++ goto out_idev; ++ } ++ ++ r = request_mem_region(r->start, 0x4c, "pxakbd"); ++ if (!r) { ++ printk(KERN_ERR "pxakbd: can't request memregion\n"); ++ ret = -EBUSY; ++ goto out_irq; ++ } ++ ++ /* set up gpio */ ++ pxakbd->pd->init(); ++ ++ /* set keypad control register */ ++ KPC = (KPC_ASACT | /* automatic scan on activity */ ++ KPC_ME | KPC_DE | /* matrix and direct keypad enabled */ ++ ((pxakbd->pd->matrix.cols-1)<<23) | /* columns */ ++ ((pxakbd->pd->matrix.rows-1)<<26) | /* rows */ ++ ((pxakbd->pd->direct.num-1)<<6) | /* direct keys */ ++ KPC_MS_ALL); /* scan all columns */ ++ ++ pxa_set_cken(CKEN_KEYPAD, 1); ++ ++ KPC |= (KPC_DIE | KPC_MIE); /* enable matrix and direct keyboard */ ++ ++ KPKDI = 0x40; /* matrix key debounce interval: 0x40 */ ++ ++ platform_set_drvdata(pdev, pxakbd); ++ ++ return input_register_device(pxakbd->input); ++ ++out_drvdata: ++ platform_set_drvdata(pdev, NULL); ++out_mem: ++ release_resource(r); ++out_irq: ++ free_irq(pxakbd->irq, pxakbd); ++out_idev: ++ kfree(input_dev->keycode); ++ input_free_device(input_dev); ++out_pxa: ++ kfree(pxakbd); ++out: ++ return ret; ++} ++ ++static int pxakbd_remove(struct platform_device *pdev) ++{ ++ struct pxakbd *pxakbd = platform_get_drvdata(pdev); ++ ++ kfree(pxakbd->input->keycode); ++ input_unregister_device(pxakbd->input); ++ platform_set_drvdata(pdev, NULL); ++ release_resource(pxakbd->res); ++ free_irq(pxakbd->irq, pxakbd); ++ kfree(pxakbd); ++ ++ return 0; ++} ++ ++static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct pxakbd *pxakbd = platform_get_drvdata(pdev); ++ ++ pxakbd->kpc = KPC; ++ pxakbd->kpkdi = KPKDI; ++ ++ return 0; ++} ++ ++static int pxakbd_resume(struct platform_device *pdev) ++{ ++ struct pxakbd *pxakbd = platform_get_drvdata(pdev); ++ ++ KPC = pxakbd->kpc; ++ KPKDI = pxakbd->kpkdi; ++ ++ return 0; ++} ++ ++static struct platform_driver pxakbd_driver = { ++ .probe = &pxakbd_probe, ++ .remove = &pxakbd_remove, ++ .suspend = &pxakbd_suspend, ++ .resume = &pxakbd_resume, ++ .driver = { ++ .name = "pxa-keyboard", ++ }, ++}; ++ ++static int __devinit pxakbd_init(void) ++{ ++ return platform_driver_register(&pxakbd_driver); ++} ++ ++static void __exit pxakbd_exit(void) ++{ ++ platform_driver_unregister(&pxakbd_driver); ++} ++ ++module_init(pxakbd_init); ++module_exit(pxakbd_exit); ++ ++MODULE_AUTHOR("Harald Welte <laforge@openezx.org>"); ++MODULE_DESCRIPTION("Driver for Intel PXA27x keypad controller"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-10-23 23:04:39.000000000 +0200 ++++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h 2007-10-23 23:04:42.000000000 +0200 +@@ -2256,6 +2256,11 @@ + #define KPMK_MKP (0x1 << 31) + #define KPAS_SO (0x1 << 31) + #define KPASMKPx_SO (0x1 << 31) ++#define KPAS_RP (0x000000f0) ++#define KPAS_CP (0x0000000f) ++#define KPAS_MUKP (0x7c000000) ++#define KPAS_MUKP_ONE (0x04000000) ++#define KPAS_MUKP_NONE (0x00000000) + + /* + * UHC: USB Host Controller (OHCI-like) register definitions +Index: linux-2.6.23/arch/arm/mach-pxa/pxa27x.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/pxa27x.c 2007-10-23 23:04:39.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/pxa27x.c 2007-10-23 23:04:42.000000000 +0200 +@@ -349,6 +349,7 @@ + &pxa_device_rtc, + &pxa27x_device_i2c_power, + &pxa27x_device_ohci, ++ &pxa_device_kbd, + }; + + void __init pxa27x_init_irq(void) +Index: linux-2.6.23/arch/arm/mach-pxa/devices.h +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/devices.h 2007-10-23 23:04:39.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/devices.h 2007-10-23 23:04:42.000000000 +0200 +@@ -9,3 +9,4 @@ + extern struct platform_device pxa_device_i2s; + extern struct platform_device pxa_device_ficp; + extern struct platform_device pxa_device_rtc; ++extern struct platform_device pxa_device_kbd; diff --git a/packages/linux/linux-ezx-2.6.23/patches/pxa27x-udc-fix-a1200.patch b/packages/linux/linux-ezx-2.6.23/patches/pxa27x-udc-fix-a1200.patch new file mode 100644 index 0000000000..7ea9f18d0a --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/pxa27x-udc-fix-a1200.patch @@ -0,0 +1,45 @@ +This hack hardcodes pxa27x-udc to ether_gadget. This is just a temp workaround. +Index: linux-2.6.23/drivers/usb/gadget/ether.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/ether.c 2007-10-23 12:58:40.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/ether.c 2007-10-23 12:58:46.000000000 +0200 +@@ -2709,10 +2709,16 @@ + MODULE_LICENSE ("GPL"); + + +-static int __init init (void) ++// Alex add FIXME ++int usb_ether_init (void) + { + return usb_gadget_register_driver (ð_driver); + } ++ ++static int __init init (void) ++{ ++// return usb_gadget_register_driver (ð_driver); ++} + module_init (init); + + static void __exit cleanup (void) +Index: linux-2.6.23/drivers/usb/gadget/pxa27x_udc.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/pxa27x_udc.c 2007-10-23 12:58:40.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/pxa27x_udc.c 2007-10-23 13:01:47.000000000 +0200 +@@ -65,6 +65,8 @@ + //#include <asm/arch/udc.h> + #include <asm/mach/udc_pxa2xx.h> + ++extern int usb_ether_init(void); ++ + /* + * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x + * series processors. +@@ -2275,6 +2277,8 @@ + udc_init_ep(udc); + udc_reinit(udc); + ++ usb_ether_init(); // Alex add FIXME ++ + /* irq setup after old hardware state is cleaned up */ + retval = request_irq(irq, pxa27x_udc_irq, 0, driver_name, udc); + if (retval != 0) { diff --git a/packages/linux/linux-ezx-2.6.23/patches/pxa27x-udc-support.3.patch b/packages/linux/linux-ezx-2.6.23/patches/pxa27x-udc-support.3.patch new file mode 100644 index 0000000000..21482fdc8f --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/pxa27x-udc-support.3.patch @@ -0,0 +1,3113 @@ +Index: linux-2.6.23/arch/arm/mach-pxa/generic.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/generic.c 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/arch/arm/mach-pxa/generic.c 2007-10-23 12:48:34.000000000 +0200 +@@ -283,7 +283,11 @@ + static u64 udc_dma_mask = ~(u32)0; + + struct platform_device pxa_device_udc = { ++#ifdef CONFIG_PXA27x ++ .name = "pxa27x-udc", ++#else + .name = "pxa2xx-udc", ++#endif + .id = -1, + .resource = pxa2xx_udc_resources, + .num_resources = ARRAY_SIZE(pxa2xx_udc_resources), +Index: linux-2.6.23/drivers/usb/gadget/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/Kconfig 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/Kconfig 2007-10-23 12:48:34.000000000 +0200 +@@ -167,6 +167,24 @@ + default USB_GADGET + select USB_GADGET_SELECTED + ++config USB_GADGET_PXA27X ++ boolean "PXA 27x" ++ depends on ARCH_PXA && PXA27x ++ help ++ Intel's PXA 27x series XScale processors include an integrated ++ full speed USB 1.1 device controller. ++ ++ Say "y" to link the driver statically, or "m" to build a ++ dynamically linked module called "pxa2xx_udc" and force all ++ gadget drivers to also be dynamically linked. ++ ++ ++config USB_PXA27X ++ tristate ++ depends on USB_GADGET_PXA27X ++ default USB_GADGET ++ select USB_GADGET_SELECTED ++ + # if there's only one gadget driver, using only two bulk endpoints, + # don't waste memory for the other endpoints + config USB_PXA2XX_SMALL +Index: linux-2.6.23/drivers/usb/gadget/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/Makefile 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/Makefile 2007-10-23 12:48:34.000000000 +0200 +@@ -9,6 +9,7 @@ + obj-$(CONFIG_USB_NET2280) += net2280.o + obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o + obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o ++obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o + obj-$(CONFIG_USB_GOKU) += goku_udc.o + obj-$(CONFIG_USB_OMAP) += omap_udc.o + obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o +Index: linux-2.6.23/drivers/usb/gadget/epautoconf.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/epautoconf.c 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/epautoconf.c 2007-10-23 12:48:34.000000000 +0200 +@@ -230,7 +230,8 @@ + */ + struct usb_ep * __devinit usb_ep_autoconfig ( + struct usb_gadget *gadget, +- struct usb_endpoint_descriptor *desc ++ struct usb_endpoint_descriptor *desc, ++ int config, int interface, int alt + ) + { + struct usb_ep *ep; +@@ -238,6 +239,11 @@ + + type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + ++ /* If have ep_alloc() function use it! */ ++ if (gadget->ops->ep_alloc) ++ return gadget->ops->ep_alloc(gadget, desc, ++ config, interface, alt); ++ + /* First, apply chip-specific "best usage" knowledge. + * This might make a good usb_gadget_ops hook ... + */ +Index: linux-2.6.23/drivers/usb/gadget/ether.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/ether.c 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/ether.c 2007-10-23 12:48:34.000000000 +0200 +@@ -257,10 +257,6 @@ + #define DEV_CONFIG_CDC + #endif + +-#ifdef CONFIG_USB_GADGET_PXA27X +-#define DEV_CONFIG_CDC +-#endif +- + #ifdef CONFIG_USB_GADGET_S3C2410 + #define DEV_CONFIG_CDC + #endif +@@ -292,6 +288,10 @@ + #define DEV_CONFIG_SUBSET + #endif + ++#ifdef CONFIG_USB_GADGET_PXA27X ++#define DEV_CONFIG_SUBSET ++#endif ++ + #ifdef CONFIG_USB_GADGET_SUPERH + #define DEV_CONFIG_SUBSET + #endif +@@ -1042,13 +1042,12 @@ + static int + set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) + { +- int result = 0; +- struct usb_gadget *gadget = dev->gadget; ++ int result = 0; + + #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + /* status endpoint used for RNDIS and (optionally) CDC */ + if (!subset_active(dev) && dev->status_ep) { +- dev->status = ep_desc (gadget, &hs_status_desc, ++ dev->status = ep_desc (dev->gadget, &hs_status_desc, + &fs_status_desc); + dev->status_ep->driver_data = dev; + +@@ -1061,10 +1060,10 @@ + } + #endif + +- dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc); ++ dev->in = ep_desc(dev->gadget, &hs_source_desc, &fs_source_desc); + dev->in_ep->driver_data = dev; + +- dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc); ++ dev->out = ep_desc(dev->gadget, &hs_sink_desc, &fs_sink_desc); + dev->out_ep->driver_data = dev; + + /* With CDC, the host isn't allowed to use these two data +@@ -2320,6 +2319,9 @@ + * non-CDC to be compatible with ARM Linux-2.4 "usb-eth". + */ + cdc = 0; ++ } else if (gadget_is_pxa27x(gadget)) { ++ /* hardware can't write zlps */ ++ zlp = 0; + } + + gcnum = usb_gadget_controller_number (gadget); +@@ -2386,7 +2388,22 @@ + + /* all we really need is bulk IN/OUT */ + usb_ep_autoconfig_reset (gadget); +- in_ep = usb_ep_autoconfig (gadget, &fs_source_desc); ++#ifdef CONFIG_USB_ETH_RNDIS ++ in_ep = usb_ep_autoconfig (gadget, &fs_source_desc, ++ DEV_RNDIS_CONFIG_VALUE, ++ (int)rndis_data_intf.bInterfaceNumber, ++ (int)rndis_data_intf.bAlternateSetting); ++#elif defined(DEV_CONFIG_CDC) ++ in_ep = usb_ep_autoconfig (gadget, &fs_source_desc, ++ DEV_CONFIG_VALUE, ++ (int)data_intf.bInterfaceNumber, ++ (int)data_intf.bAlternateSetting); ++#elif defined(DEV_CONFIG_SUBSET) ++ in_ep = usb_ep_autoconfig (gadget, &fs_source_desc, ++ DEV_CONFIG_VALUE, ++ (int)subset_data_intf.bInterfaceNumber, ++ (int)subset_data_intf.bAlternateSetting); ++#endif /* CONFIG_USB_ETH_RNDIS */ + if (!in_ep) { + autoconf_fail: + dev_err (&gadget->dev, +@@ -2395,8 +2412,24 @@ + return -ENODEV; + } + in_ep->driver_data = in_ep; /* claim */ ++ ++#ifdef CONFIG_USB_ETH_RNDIS ++ out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc, ++ DEV_RNDIS_CONFIG_VALUE, ++ (int)rndis_data_intf.bInterfaceNumber, ++ (int)rndis_data_intf.bAlternateSetting); ++#elif defined(DEV_CONFIG_CDC) ++ out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc, ++ DEV_CONFIG_VALUE, ++ (int)data_intf.bInterfaceNumber, ++ (int)data_intf.bAlternateSetting); ++#elif defined(DEV_CONFIG_SUBSET) ++ out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc, ++ DEV_CONFIG_VALUE, ++ (int)subset_data_intf.bInterfaceNumber, ++ (int)subset_data_intf.bAlternateSetting); ++#endif /* CONFIG_USB_ETH_RNDIS */ + +- out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc); + if (!out_ep) + goto autoconf_fail; + out_ep->driver_data = out_ep; /* claim */ +@@ -2406,7 +2439,18 @@ + * Since some hosts expect one, try to allocate one anyway. + */ + if (cdc || rndis) { +- status_ep = usb_ep_autoconfig (gadget, &fs_status_desc); ++#ifdef CONFIG_USB_ETH_RNDIS ++ status_ep = usb_ep_autoconfig (gadget, &fs_status_desc, ++ DEV_RNDIS_CONFIG_VALUE, ++ (int)rndis_control_intf.bInterfaceNumber, ++ (int)rndis_control_intf.bAlternateSetting); ++#elif defined(DEV_CONFIG_CDC) ++ status_ep = usb_ep_autoconfig (gadget, &fs_status_desc, ++ DEV_CONFIG_VALUE, ++ (int)control_intf.bInterfaceNumber, ++ (int)control_intf.bAlternateSetting); ++#endif /* CONFIG_USB_ETH_RNDIS */ ++ + if (status_ep) { + status_ep->driver_data = status_ep; /* claim */ + } else if (rndis) { +@@ -2414,13 +2458,14 @@ + "can't run RNDIS on %s\n", + gadget->name); + return -ENODEV; ++ } + #ifdef DEV_CONFIG_CDC +- /* pxa25x only does CDC subset; often used with RNDIS */ +- } else if (cdc) { ++ /* pxa25x only does CDC subset; often used with RNDIS */ ++ else if (cdc) { + control_intf.bNumEndpoints = 0; + /* FIXME remove endpoint from descriptor list */ +-#endif + } ++#endif + } + #endif + +Index: linux-2.6.23/drivers/usb/gadget/file_storage.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/file_storage.c 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/file_storage.c 2007-10-23 12:48:34.000000000 +0200 +@@ -3912,20 +3912,20 @@ + + /* Find all the endpoints we will use */ + usb_ep_autoconfig_reset(gadget); +- ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc); ++ ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc, 0, 0, 0); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg; // claim the endpoint + fsg->bulk_in = ep; + +- ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc); ++ ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc, 0, 0, 0); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg; // claim the endpoint + fsg->bulk_out = ep; + + if (transport_is_cbi()) { +- ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc); ++ ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc, 0, 0, 0); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg; // claim the endpoint +Index: linux-2.6.23/drivers/usb/gadget/gmidi.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/gmidi.c 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/gmidi.c 2007-10-23 12:48:34.000000000 +0200 +@@ -1204,7 +1204,7 @@ + * but there may also be important quirks to address. + */ + usb_ep_autoconfig_reset(gadget); +- in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc); ++ in_ep = usb_ep_autoconfig(gadget, &bulk_in_desc, 0, 0, 0); + if (!in_ep) { + autoconf_fail: + printk(KERN_ERR "%s: can't autoconfigure on %s\n", +@@ -1214,7 +1214,7 @@ + EP_IN_NAME = in_ep->name; + in_ep->driver_data = in_ep; /* claim */ + +- out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc); ++ out_ep = usb_ep_autoconfig(gadget, &bulk_out_desc, 0, 0, 0); + if (!out_ep) { + goto autoconf_fail; + } +Index: linux-2.6.23/drivers/usb/gadget/pxa27x_udc.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/usb/gadget/pxa27x_udc.c 2007-10-23 12:48:34.000000000 +0200 +@@ -0,0 +1,2408 @@ ++/* ++ * linux/drivers/usb/gadget/pxa27x_udc.c ++ * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers ++ * ++ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker) ++ * Copyright (C) 2003 Robert Schwebel, Pengutronix ++ * Copyright (C) 2003 Benedikt Spranger, Pengutronix ++ * Copyright (C) 2003 David Brownell ++ * Copyright (C) 2003 Joshua Wise ++ * Copyright (C) 2004 Intel Corporation ++ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ */ ++ ++#undef DEBUG ++/* #define VERBOSE DBG_VERBOSE */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/ioport.h> ++#include <linux/types.h> ++#include <linux/version.h> ++#include <linux/errno.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/proc_fs.h> ++#include <linux/mm.h> ++#include <linux/device.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++ ++#include <asm/byteorder.h> ++#include <asm/dma.h> ++#include <asm/gpio.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/mach-types.h> ++#include <asm/unaligned.h> ++#include <asm/hardware.h> ++//#include <asm/arch/pxa-regs.h> ++ ++#include <linux/usb/ch9.h> ++#include <linux/usb_gadget.h> ++ ++//#include <asm/arch/udc.h> ++#include <asm/mach/udc_pxa2xx.h> ++ ++/* ++ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27x ++ * series processors. ++ * Such controller drivers work with a gadget driver. The gadget driver ++ * returns descriptors, implements configuration and data protocols used ++ * by the host to interact with this device, and allocates endpoints to ++ * the different protocol interfaces. The controller driver virtualizes ++ * usb hardware so that the gadget drivers will be more portable. ++ * ++ * This UDC hardware wants to implement a bit too much USB protocol, so ++ * it constrains the sorts of USB configuration change events that work. ++ * The errata for these chips are misleading; some "fixed" bugs from ++ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there. ++ */ ++ ++#define DRIVER_VERSION "28-Jun-2007" ++#define DRIVER_DESC "PXA 27x USB Device Controller driver" ++ ++static const char driver_name[] = "pxa27x_udc"; ++ ++static const char ep0name[] = "ep0"; ++ ++#undef USE_DMA ++#undef DISABLE_TEST_MODE ++ ++#ifdef CONFIG_PROC_FS ++#define UDC_PROC_FILE ++#endif ++ ++#include "pxa27x_udc.h" ++ ++#ifdef CONFIG_EMBEDDED ++/* few strings, and little code to use them */ ++#undef DEBUG ++#undef UDC_PROC_FILE ++#endif ++ ++#ifdef USE_DMA ++static int use_dma = 1; ++module_param(use_dma, bool, 0); ++MODULE_PARM_DESC(use_dma, "true to use dma"); ++ ++static void dma_nodesc_handler(int dmach, void *_ep); ++static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req); ++ ++#define DMASTR " (dma support)" ++ ++#else /* !USE_DMA */ ++#define DMASTR " (pio only)" ++#endif ++ ++#ifdef CONFIG_USB_PXA27X_SMALL ++#define SIZE_STR " (small)" ++#else ++#define SIZE_STR "" ++#endif ++ ++#ifdef DISABLE_TEST_MODE ++/* (mode == 0) == no undocumented chip tweaks ++ * (mode & 1) == double buffer bulk IN ++ * (mode & 2) == double buffer bulk OUT ++ * ... so mode = 3 (or 7, 15, etc) does it for both ++ */ ++static ushort fifo_mode = 0; ++module_param(fifo_mode, ushort, 0); ++MODULE_PARM_DESC(fifo_mode, "pxa27x udc fifo mode"); ++#endif ++ ++#define UDCISR0_IR0 0x3 ++#define UDCISR_INT_MASK (UDC_INT_FIFOERROR | UDC_INT_PACKETCMP) ++#define UDCICR_INT_MASK UDCISR_INT_MASK ++ ++#define UDCCSR_MASK (UDCCSR_FST | UDCCSR_DME) ++/* --------------------------------------------------------------------------- ++ * endpoint related parts of the api to the usb controller hardware, ++ * used by gadget driver; and the inner talker-to-hardware core. ++ * --------------------------------------------------------------------------- ++ */ ++ ++static void pxa27x_ep_fifo_flush(struct usb_ep *ep); ++static void nuke(struct pxa27x_ep *, int status); ++ ++/* one GPIO should control a D+ pullup, so host sees this device (or not) */ ++static void pullup_off(void) ++{ ++ struct pxa2xx_udc_mach_info *mach = the_controller->mach; ++ ++ if (mach->gpio_pullup) ++ gpio_set_value(mach->gpio_pullup, 0); ++ else if (mach->udc_command) ++ mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); ++} ++ ++static void pullup_on(void) ++{ ++ struct pxa2xx_udc_mach_info *mach = the_controller->mach; ++ ++ if (mach->gpio_pullup) ++ gpio_set_value(mach->gpio_pullup, 1); ++ else if (mach->udc_command) ++ mach->udc_command(PXA2XX_UDC_CMD_CONNECT); ++} ++ ++static void pio_irq_enable(int ep_num) ++{ ++ if (ep_num < 16) ++ UDCICR0 |= 3 << (ep_num * 2); ++ else { ++ ep_num -= 16; ++ UDCICR1 |= 3 << (ep_num * 2); ++ } ++} ++ ++static void pio_irq_disable(int ep_num) ++{ ++ ep_num &= 0xf; ++ if (ep_num < 16) ++ UDCICR0 &= ~(3 << (ep_num * 2)); ++ else { ++ ep_num -= 16; ++ UDCICR1 &= ~(3 << (ep_num * 2)); ++ } ++} ++ ++/* The UDCCR reg contains mask and interrupt status bits, ++ * so using '|=' isn't safe as it may ack an interrupt. ++ */ ++#define UDCCR_MASK_BITS (UDCCR_OEN | UDCCR_UDE) ++ ++static inline void udc_set_mask_UDCCR(int mask) ++{ ++ UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS); ++} ++ ++static inline void udc_clear_mask_UDCCR(int mask) ++{ ++ UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS); ++} ++ ++static inline void udc_ack_int_UDCCR(int mask) ++{ ++ /* udccr contains the bits we dont want to change */ ++ __u32 udccr = UDCCR & UDCCR_MASK_BITS; ++ ++ UDCCR = udccr | (mask & ~UDCCR_MASK_BITS); ++} ++ ++/* ++ * endpoint enable/disable ++ * ++ * we need to verify the descriptors used to enable endpoints. since pxa27x ++ * endpoint configurations are fixed, and are pretty much always enabled, ++ * there's not a lot to manage here. ++ * ++ * because pxa27x can't selectively initialize bulk (or interrupt) endpoints, ++ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except ++ * for a single interface (with only the default altsetting) and for gadget ++ * drivers that don't halt endpoints (not reset by set_interface). that also ++ * means that if you use ISO, you must violate the USB spec rule that all ++ * iso endpoints must be in non-default altsettings. ++ */ ++static int pxa27x_ep_enable(struct usb_ep *_ep, ++ const struct usb_endpoint_descriptor *desc) ++{ ++ struct pxa27x_ep *ep; ++ struct pxa27x_udc *dev; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep || !desc || _ep->name == ep0name ++ || desc->bDescriptorType != USB_DT_ENDPOINT ++ || ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) { ++ DMSG("%s, bad ep or descriptor\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ /* xfer types must match, except that interrupt ~= bulk */ ++ if (ep->ep_type != USB_ENDPOINT_XFER_BULK ++ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) { ++ DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name); ++ return -EINVAL; ++ } ++ ++ /* hardware _could_ do smaller, but driver doesn't */ ++ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK ++ && le16_to_cpu(desc->wMaxPacketSize) ++ != BULK_FIFO_SIZE) ++ || !desc->wMaxPacketSize) { ++ DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name); ++ return -ERANGE; ++ } ++ ++ dev = ep->dev; ++ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { ++ DMSG("%s, bogus device state\n", __FUNCTION__); ++ return -ESHUTDOWN; ++ } ++ ++ ep->desc = desc; ++ ep->dma = -1; ++ ep->stopped = 0; ++ ep->pio_irqs = ep->dma_irqs = 0; ++ ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); ++ ++ /* flush fifo (mostly for OUT buffers) */ ++ pxa27x_ep_fifo_flush(_ep); ++ ++ /* ... reset halt state too, if we could ... */ ++ ++#ifdef USE_DMA ++ /* for (some) bulk and ISO endpoints, try to get a DMA channel and ++ * bind it to the endpoint. otherwise use PIO. ++ */ ++ DMSG("%s: called attributes=%d\n", __FUNCTION__, ep->ep_type); ++ switch (ep->ep_type) { ++ case USB_ENDPOINT_XFER_ISOC: ++ if (le16_to_cpu(desc->wMaxPacketSize) % 32) ++ break; ++ /* fall through */ ++ case USB_ENDPOINT_XFER_BULK: ++ if (!use_dma || !ep->reg_drcmr) ++ break; ++ ep->dma = pxa_request_dma((char *)_ep->name, ++ (le16_to_cpu(desc->wMaxPacketSize) > 64) ++ ? DMA_PRIO_MEDIUM /* some iso */ ++ : DMA_PRIO_LOW, ++ dma_nodesc_handler, ep); ++ if (ep->dma >= 0) { ++ *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma; ++ DMSG("%s using dma%d\n", _ep->name, ep->dma); ++ } ++ default: ++ break; ++ } ++#endif ++ DBG(DBG_VERBOSE, "enabled %s\n", _ep->name); ++ return 0; ++} ++ ++static int pxa27x_ep_disable(struct usb_ep *_ep) ++{ ++ struct pxa27x_ep *ep; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep || !ep->desc) { ++ DMSG("%s, %s not enabled\n", __FUNCTION__, ++ _ep ? ep->ep.name : NULL); ++ return -EINVAL; ++ } ++ nuke(ep, -ESHUTDOWN); ++ ++#ifdef USE_DMA ++ if (ep->dma >= 0) { ++ *ep->reg_drcmr = 0; ++ pxa_free_dma(ep->dma); ++ ep->dma = -1; ++ } ++#endif ++ ++ /* flush fifo (mostly for IN buffers) */ ++ pxa27x_ep_fifo_flush(_ep); ++ ++ ep->desc = 0; ++ ep->stopped = 1; ++ ++ DBG(DBG_VERBOSE, "%s disabled\n", _ep->name); ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* for the pxa27x, these can just wrap kmalloc/kfree. gadget drivers ++ * must still pass correctly initialized endpoints, since other controller ++ * drivers may care about how it's currently set up (dma issues etc). ++ */ ++ ++/* ++ * pxa27x_ep_alloc_request - allocate a request data structure ++ */ ++static struct usb_request *pxa27x_ep_alloc_request(struct usb_ep *_ep, ++ unsigned int gfp_flags) ++{ ++ struct pxa27x_request *req; ++ ++ req = kmalloc(sizeof *req, gfp_flags); ++ if (!req) ++ return 0; ++ ++ memset(req, 0, sizeof *req); ++ INIT_LIST_HEAD(&req->queue); ++ return &req->req; ++} ++ ++/* ++ * pxa27x_ep_free_request - deallocate a request data structure ++ */ ++static void pxa27x_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct pxa27x_request *req; ++ ++ req = container_of(_req, struct pxa27x_request, req); ++ WARN_ON(!list_empty(&req->queue)); ++ kfree(req); ++} ++ ++/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's ++ * no device-affinity and the heap works perfectly well for i/o buffers. ++ * It wastes much less memory than dma_alloc_coherent() would, and even ++ * prevents cacheline (32 bytes wide) sharing problems. ++ */ ++static void *pxa27x_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes, ++ dma_addr_t * dma, unsigned int gfp_flags) ++{ ++ char *retval; ++ ++ retval = kmalloc(bytes, gfp_flags & ~(__GFP_DMA | __GFP_HIGHMEM)); ++ if (retval) ++#ifdef USE_DMA ++ *dma = virt_to_bus(retval); ++#else ++ *dma = (dma_addr_t) ~0; ++#endif ++ return retval; ++} ++ ++static void ++pxa27x_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, ++ unsigned bytes) ++{ ++ kfree(buf); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * done - retire a request; caller blocked irqs ++ */ ++static void done(struct pxa27x_ep *ep, struct pxa27x_request *req, int status) ++{ ++ list_del_init(&req->queue); ++ if (likely(req->req.status == -EINPROGRESS)) ++ req->req.status = status; ++ else ++ status = req->req.status; ++ ++ if (status && status != -ESHUTDOWN) ++ DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n", ++ ep->ep.name, &req->req, status, ++ req->req.actual, req->req.length); ++ ++ /* don't modify queue heads during completion callback */ ++ req->req.complete(&ep->ep, &req->req); ++} ++ ++static inline void ep0_idle(struct pxa27x_udc *dev) ++{ ++ dev->ep0state = EP0_IDLE; ++ LED_EP0_OFF; ++} ++ ++static int ++write_packet(volatile u32 * uddr, struct pxa27x_request *req, unsigned max) ++{ ++ u32 *buf; ++ int length, count, remain; ++ ++ buf = (u32 *) (req->req.buf + req->req.actual); ++ prefetch(buf); ++ ++ /* how big will this packet be? */ ++ length = min(req->req.length - req->req.actual, max); ++ req->req.actual += length; ++ ++ remain = length & 0x3; ++ count = length & ~(0x3); ++ ++ while (likely(count)) { ++ *uddr = *buf++; ++ count -= 4; ++ } ++ ++ if (remain) { ++ volatile u8 *reg = (u8 *) uddr; ++ char *rd = (u8 *) buf; ++ ++ while (remain--) { ++ *reg = *rd++; ++ } ++ } ++ ++ return length; ++} ++ ++/* ++ * write to an IN endpoint fifo, as many packets as possible. ++ * irqs will use this to write the rest later. ++ * caller guarantees at least one packet buffer is ready (or a zlp). ++ */ ++static int write_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ unsigned max; ++ ++ max = le16_to_cpu(ep->desc->wMaxPacketSize); ++ do { ++ int count; ++ int is_last, is_short; ++ ++ count = write_packet(ep->reg_udcdr, req, max); ++ ++ /* last packet is usually short (or a zlp) */ ++ if (unlikely(count != max)) ++ is_last = is_short = 1; ++ else { ++ if (likely(req->req.length != req->req.actual) ++ || req->req.zero) ++ is_last = 0; ++ else ++ is_last = 1; ++ /* interrupt/iso maxpacket may not fill the fifo */ ++ is_short = unlikely(max < ep->fifo_size); ++ } ++ ++ DMSG("wrote %s count:%d bytes%s%s %d left %p\n", ++ ep->ep.name, count, ++ is_last ? "/L" : "", is_short ? "/S" : "", ++ req->req.length - req->req.actual, &req->req); ++ ++ /* let loose that packet. maybe try writing another one, ++ * double buffering might work. TSP, TPC, and TFS ++ * bit values are the same for all normal IN endpoints. ++ */ ++ *ep->reg_udccsr = UDCCSR_PC; ++ if (is_short) ++ *ep->reg_udccsr = UDCCSR_SP; ++ ++ /* requests complete when all IN data is in the FIFO */ ++ if (is_last) { ++ done(ep, req, 0); ++ if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) { ++ pio_irq_disable(ep->ep_num); ++#ifdef USE_DMA ++ /* unaligned data and zlps couldn't use dma */ ++ if (unlikely(!list_empty(&ep->queue))) { ++ req = list_entry(ep->queue.next, ++ struct pxa27x_request, ++ queue); ++ kick_dma(ep, req); ++ return 0; ++ } ++#endif ++ } ++ return 1; ++ } ++ /* TODO experiment: how robust can fifo mode tweaking be? ++ * double buffering is off in the default fifo mode, which ++ * prevents TFS from being set here. ++ */ ++ ++ } while (*ep->reg_udccsr & UDCCSR_FS); ++ return 0; ++} ++ ++/* caller asserts req->pending (ep0 irq status nyet cleared); starts ++ * ep0 data stage. these chips want very simple state transitions. ++ */ ++static inline void ep0start(struct pxa27x_udc *dev, u32 flags, const char *tag) ++{ ++ UDCCSR0 = flags | UDCCSR0_SA | UDCCSR0_OPC; ++ UDCISR0 = UDCICR_INT(0, UDC_INT_FIFOERROR | UDC_INT_PACKETCMP); ++ dev->req_pending = 0; ++ DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n", ++ __FUNCTION__, tag, UDCCSR0, flags); ++} ++ ++static int write_ep0_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ unsigned count; ++ int is_short; ++ ++ count = write_packet(&UDCDR0, req, EP0_FIFO_SIZE); ++ ep->dev->stats.write.bytes += count; ++ ++ /* last packet "must be" short (or a zlp) */ ++ is_short = (count != EP0_FIFO_SIZE); ++ ++ DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count, ++ req->req.length - req->req.actual, &req->req); ++ ++ if (unlikely(is_short)) { ++ if (ep->dev->req_pending) ++ ep0start(ep->dev, UDCCSR0_IPR, "short IN"); ++ else ++ UDCCSR0 = UDCCSR0_IPR; ++ ++ count = req->req.length; ++ done(ep, req, 0); ++ ep0_idle(ep->dev); ++#if 0 ++ /* This seems to get rid of lost status irqs in some cases: ++ * host responds quickly, or next request involves config ++ * change automagic, or should have been hidden, or ... ++ * ++ * FIXME get rid of all udelays possible... ++ */ ++ if (count >= EP0_FIFO_SIZE) { ++ count = 100; ++ do { ++ if ((UDCCSR0 & UDCCSR0_OPC) != 0) { ++ /* clear OPC, generate ack */ ++ UDCCSR0 = UDCCSR0_OPC; ++ break; ++ } ++ count--; ++ udelay(1); ++ } while (count); ++ } ++#endif ++ } else if (ep->dev->req_pending) ++ ep0start(ep->dev, 0, "IN"); ++ return is_short; ++} ++ ++/* ++ * read_fifo - unload packet(s) from the fifo we use for usb OUT ++ * transfers and put them into the request. caller should have made ++ * sure there's at least one packet ready. ++ * ++ * returns true if the request completed because of short packet or the ++ * request buffer having filled (and maybe overran till end-of-packet). ++ */ ++static int read_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ for (;;) { ++ u32 *buf; ++ int bufferspace, count, is_short; ++ ++ /* make sure there's a packet in the FIFO. */ ++ if (unlikely((*ep->reg_udccsr & UDCCSR_PC) == 0)) ++ break; ++ buf = (u32 *) (req->req.buf + req->req.actual); ++ prefetchw(buf); ++ bufferspace = req->req.length - req->req.actual; ++ ++ /* read all bytes from this packet */ ++ if (likely(*ep->reg_udccsr & UDCCSR_BNE)) { ++ count = 0x3ff & *ep->reg_udcbcr; ++ req->req.actual += min(count, bufferspace); ++ } else /* zlp */ ++ count = 0; ++ ++ is_short = (count < ep->ep.maxpacket); ++ DMSG("read %s udccsr:%02x, count:%d bytes%s req %p %d/%d\n", ++ ep->ep.name, *ep->reg_udccsr, count, ++ is_short ? "/S" : "", ++ &req->req, req->req.actual, req->req.length); ++ ++#if 0 ++ dump_regs(ep->ep_num ); ++#endif ++ count = min(count, bufferspace); ++ while (likely(count > 0)) { ++ *buf++ = *ep->reg_udcdr; ++ count -= 4; ++ } ++ DMSG("Buf:0x%p\n", req->req.buf); ++ ++ *ep->reg_udccsr = UDCCSR_PC; ++ /* RPC/RSP/RNE could now reflect the other packet buffer */ ++ ++ /* completion */ ++ if (is_short || req->req.actual == req->req.length) { ++ done(ep, req, 0); ++ if (list_empty(&ep->queue)) ++ pio_irq_disable(ep->ep_num); ++ return 1; ++ } ++ ++ /* finished that packet. the next one may be waiting... */ ++ } ++ return 0; ++} ++ ++/* ++ * special ep0 version of the above. no UBCR0 or double buffering; status ++ * handshaking is magic. most device protocols don't need control-OUT. ++ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other ++ * protocols do use them. ++ */ ++static int read_ep0_fifo(struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ u32 *buf, word; ++ unsigned bufferspace; ++ ++ buf = (u32 *) (req->req.buf + req->req.actual); ++ bufferspace = req->req.length - req->req.actual; ++ ++ while (UDCCSR0 & UDCCSR0_RNE) { ++ word = UDCDR0; ++ ++ if (unlikely(bufferspace == 0)) { ++ /* this happens when the driver's buffer ++ * is smaller than what the host sent. ++ * discard the extra data. ++ */ ++ if (req->req.status != -EOVERFLOW) ++ DMSG("%s overflow\n", ep->ep.name); ++ req->req.status = -EOVERFLOW; ++ } else { ++ *buf++ = word; ++ req->req.actual += 4; ++ bufferspace -= 4; ++ } ++ } ++ ++ UDCCSR0 = UDCCSR0_OPC; ++ ++ /* completion */ ++ if (req->req.actual >= req->req.length) ++ return 1; ++ ++ /* finished that packet. the next one may be waiting... */ ++ return 0; ++} ++ ++#ifdef USE_DMA ++ ++#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE) ++static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req) ++{ ++ u32 dcmd = 0; ++ u32 len = req->req.length; ++ u32 buf = req->req.dma; ++ u32 fifo = io_v2p((u32) ep->reg_udcdr); ++ ++ buf += req->req.actual; ++ len -= req->req.actual; ++ ep->dma_con = 0; ++ ++ DMSG("%s: req:0x%p length:%d, actual:%d dma:%d\n", ++ __FUNCTION__, &req->req, req->req.length, ++ req->req.actual, ep->dma); ++ ++ /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */ ++ DCSR(ep->dma) = DCSR_NODESC; ++ if (buf & 0x3) ++ DALGN |= 1 << ep->dma; ++ else ++ DALGN &= ~(1 << ep->dma); ++ ++ if (ep->dir_in) { ++ DSADR(ep->dma) = buf; ++ DTADR(ep->dma) = fifo; ++ if (len > MAX_IN_DMA) { ++ len = MAX_IN_DMA; ++ ep->dma_con = 1; ++ } else if (len >= ep->ep.maxpacket) { ++ if ((ep->dma_con = (len % ep->ep.maxpacket) != 0)) ++ len = ep->ep.maxpacket; ++ } ++ dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN ++ | DCMD_FLOWTRG | DCMD_INCSRCADDR; ++ } else { ++ DSADR(ep->dma) = fifo; ++ DTADR(ep->dma) = buf; ++ dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN ++ | DCMD_FLOWSRC | DCMD_INCTRGADDR; ++ } ++ *ep->reg_udccsr = UDCCSR_DME; ++ DCMD(ep->dma) = dcmd; ++ DCSR(ep->dma) = DCSR_NODESC | DCSR_EORIRQEN ++ | ((ep->dir_in) ? DCSR_STOPIRQEN : 0); ++ *ep->reg_drcmr = ep->dma | DRCMR_MAPVLD; ++ DCSR(ep->dma) |= DCSR_RUN; ++} ++ ++static void cancel_dma(struct pxa27x_ep *ep) ++{ ++ struct pxa27x_request *req; ++ u32 tmp; ++ ++ if (DCSR(ep->dma) == 0 || list_empty(&ep->queue)) ++ return; ++ ++ DMSG("hehe dma:%d,dcsr:0x%x\n", ep->dma, DCSR(ep->dma)); ++ DCSR(ep->dma) = 0; ++ while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0) ++ cpu_relax(); ++ ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ tmp = DCMD(ep->dma) & DCMD_LENGTH; ++ req->req.actual = req->req.length - tmp; ++ ++ /* the last tx packet may be incomplete, so flush the fifo. ++ * FIXME correct req.actual if we can ++ */ ++ *ep->reg_udccsr = UDCCSR_FEF; ++} ++ ++static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r) ++{ ++ struct pxa27x_ep *ep = _ep; ++ struct pxa27x_request *req, *req_next; ++ u32 dcsr, tmp, completed; ++ ++ local_irq_disable(); ++ ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ ++ DMSG("%s, buf:0x%p\n", __FUNCTION__, req->req.buf); ++ ++ ep->dma_irqs++; ++ ep->dev->stats.irqs++; ++ HEX_DISPLAY(ep->dev->stats.irqs); ++ ++ completed = 0; ++ ++ dcsr = DCSR(dmach); ++ DCSR(ep->dma) &= ~DCSR_RUN; ++ ++ if (dcsr & DCSR_BUSERR) { ++ DCSR(dmach) = DCSR_BUSERR; ++ printk(KERN_ERR " Buss Error\n"); ++ req->req.status = -EIO; ++ completed = 1; ++ } else if (dcsr & DCSR_ENDINTR) { ++ DCSR(dmach) = DCSR_ENDINTR; ++ if (ep->dir_in) { ++ tmp = req->req.length - req->req.actual; ++ /* Last packet is a short one */ ++ if (tmp < ep->ep.maxpacket) { ++ int count = 0; ++ ++ *ep->reg_udccsr = UDCCSR_SP | ++ (*ep->reg_udccsr & UDCCSR_MASK); ++ /*Wait for packet out */ ++ while ((count++ < 10000) && ++ !(*ep->reg_udccsr & UDCCSR_FS)) ; ++ if (count >= 10000) ++ DMSG("Failed to send packet\n"); ++ else ++ DMSG("%s: short packet sent len:%d," ++ "length:%d,actual:%d\n", ++ __FUNCTION__, tmp, req->req.length, ++ req->req.actual); ++ req->req.actual = req->req.length; ++ completed = 1; ++ /* There are still packets to transfer */ ++ } else if (ep->dma_con) { ++ DMSG("%s: more packets,length:%d,actual:%d\n", ++ __FUNCTION__, req->req.length, ++ req->req.actual); ++ req->req.actual += ep->ep.maxpacket; ++ completed = 0; ++ } else { ++ DMSG("%s: no more packets,length:%d," ++ "actual:%d\n", __FUNCTION__, ++ req->req.length, req->req.actual); ++ req->req.actual = req->req.length; ++ completed = 1; ++ } ++ } else { ++ req->req.actual = req->req.length; ++ completed = 1; ++ } ++ } else if (dcsr & DCSR_EORINTR) { /* Only happened in OUT DMA */ ++ int remain, udccsr; ++ ++ DCSR(dmach) = DCSR_EORINTR; ++ remain = DCMD(dmach) & DCMD_LENGTH; ++ req->req.actual = req->req.length - remain; ++ ++ udccsr = *ep->reg_udccsr; ++ if (udccsr & UDCCSR_SP) { ++ *ep->reg_udccsr = UDCCSR_PC | (udccsr & UDCCSR_MASK); ++ completed = 1; ++ } ++ DMSG("%s: length:%d actual:%d\n", ++ __FUNCTION__, req->req.length, req->req.actual); ++ } else ++ DMSG("%s: Others dma:%d DCSR:0x%x DCMD:0x%x\n", ++ __FUNCTION__, dmach, DCSR(dmach), DCMD(dmach)); ++ ++ if (likely(completed)) { ++ if (req->queue.next != &ep->queue) { ++ req_next = list_entry(req->queue.next, ++ struct pxa27x_request, queue); ++ kick_dma(ep, req_next); ++ } ++ done(ep, req, 0); ++ } else { ++ kick_dma(ep, req); ++ } ++ ++ local_irq_enable(); ++} ++ ++#endif ++/*-------------------------------------------------------------------------*/ ++ ++static int ++pxa27x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, ++ unsigned int gfp_flags) ++{ ++ struct pxa27x_ep *ep; ++ struct pxa27x_request *req; ++ struct pxa27x_udc *dev; ++ unsigned long flags; ++ ++ req = container_of(_req, struct pxa27x_request, req); ++ if (unlikely(!_req || !_req->complete || !_req->buf || ++ !list_empty(&req->queue))) { ++ DMSG("%s, bad params\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ ++ DMSG("%s, ep point %d is queue\n", __FUNCTION__, ep->ep_num); ++ ++ dev = ep->dev; ++ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) { ++ DMSG("%s, bogus device state\n", __FUNCTION__); ++ return -ESHUTDOWN; ++ } ++ ++ /* iso is always one packet per request, that's the only way ++ * we can report per-packet status. that also helps with dma. ++ */ ++ if (unlikely(ep->ep_type == USB_ENDPOINT_XFER_ISOC ++ && req->req.length > le16_to_cpu ++ (ep->desc->wMaxPacketSize))) ++ return -EMSGSIZE; ++ ++#ifdef USE_DMA ++ /* FIXME: caller may already have done the dma mapping */ ++ if (ep->dma >= 0) { ++ _req->dma = dma_map_single(dev->dev, _req->buf, _req->length, ++ (ep-> ++ dir_in) ? DMA_TO_DEVICE : ++ DMA_FROM_DEVICE); ++ } ++#endif ++ ++ DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n", ++ _ep->name, _req, _req->length, _req->buf); ++ ++ local_irq_save(flags); ++ ++ _req->status = -EINPROGRESS; ++ _req->actual = 0; ++ ++ /* kickstart this i/o queue? */ ++ if (list_empty(&ep->queue) && !ep->stopped) { ++ if (ep->desc == 0 /* ep0 */ ) { ++ unsigned length = _req->length; ++ ++ switch (dev->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ dev->stats.write.ops++; ++ if (write_ep0_fifo(ep, req)) ++ req = 0; ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ dev->stats.read.ops++; ++ if (dev->req_pending) ++ ep0start(dev, UDCCSR0_IPR, "OUT"); ++ if (length == 0 || ((UDCCSR0 & UDCCSR0_RNE) != 0 ++ && read_ep0_fifo(ep, ++ req))) { ++ ep0_idle(dev); ++ done(ep, req, 0); ++ req = 0; ++ } ++ break; ++ case EP0_NO_ACTION: ++ ep0_idle(dev); ++ req = 0; ++ break; ++ default: ++ DMSG("ep0 i/o, odd state %d\n", dev->ep0state); ++ local_irq_restore(flags); ++ return -EL2HLT; ++ } ++#ifdef USE_DMA ++ /* either start dma or prime pio pump */ ++ } else if (ep->dma >= 0) { ++ kick_dma(ep, req); ++#endif ++ /* can the FIFO can satisfy the request immediately? */ ++ } else if (ep->dir_in ++ && (*ep->reg_udccsr & UDCCSR_FS) != 0 ++ && write_fifo(ep, req)) { ++ req = 0; ++ } else if ((*ep->reg_udccsr & UDCCSR_FS) != 0 ++ && read_fifo(ep, req)) { ++ req = 0; ++ } ++ DMSG("req:%p,ep->desc:%p,ep->dma:%d\n", req, ep->desc, ep->dma); ++ if (likely(req && ep->desc) && ep->dma < 0) ++ pio_irq_enable(ep->ep_num); ++ } ++ ++ /* pio or dma irq handler advances the queue. */ ++ if (likely(req != 0)) ++ list_add_tail(&req->queue, &ep->queue); ++ local_irq_restore(flags); ++ ++ return 0; ++} ++ ++/* ++ * nuke - dequeue ALL requests ++ */ ++static void nuke(struct pxa27x_ep *ep, int status) ++{ ++ struct pxa27x_request *req; ++ ++ /* called with irqs blocked */ ++#ifdef USE_DMA ++ if (ep->dma >= 0 && !ep->stopped) ++ cancel_dma(ep); ++#endif ++ while (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ done(ep, req, status); ++ } ++ if (ep->desc) ++ pio_irq_disable(ep->ep_num); ++} ++ ++/* dequeue JUST ONE request */ ++static int pxa27x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) ++{ ++ struct pxa27x_ep *ep; ++ struct pxa27x_request *req; ++ unsigned long flags; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep || ep->ep.name == ep0name) ++ return -EINVAL; ++ ++ local_irq_save(flags); ++ ++ /* make sure it's actually queued on this endpoint */ ++ list_for_each_entry(req, &ep->queue, queue) { ++ if (&req->req == _req) ++ break; ++ } ++ if (&req->req != _req) { ++ local_irq_restore(flags); ++ return -EINVAL; ++ } ++#ifdef USE_DMA ++ if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) { ++ cancel_dma(ep); ++ done(ep, req, -ECONNRESET); ++ /* restart i/o */ ++ if (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, ++ struct pxa27x_request, queue); ++ kick_dma(ep, req); ++ } ++ } else ++#endif ++ done(ep, req, -ECONNRESET); ++ ++ local_irq_restore(flags); ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static int pxa27x_ep_set_halt(struct usb_ep *_ep, int value) ++{ ++ struct pxa27x_ep *ep; ++ unsigned long flags; ++ ++ DMSG("%s is called\n", __FUNCTION__); ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name)) ++ || ep->ep_type == USB_ENDPOINT_XFER_ISOC) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return -EINVAL; ++ } ++ if (value == 0) { ++ /* this path (reset toggle+halt) is needed to implement ++ * SET_INTERFACE on normal hardware. but it can't be ++ * done from software on the PXA UDC, and the hardware ++ * forgets to do it as part of SET_INTERFACE automagic. ++ */ ++ DMSG("only host can clear %s halt\n", _ep->name); ++ return -EROFS; ++ } ++ ++ local_irq_save(flags); ++ ++ if (ep->dir_in && ((*ep->reg_udccsr & UDCCSR_FS) == 0 ++ || !list_empty(&ep->queue))) { ++ local_irq_restore(flags); ++ return -EAGAIN; ++ } ++ ++ /* FST bit is the same for control, bulk in, bulk out, interrupt in */ ++ *ep->reg_udccsr = UDCCSR_FST | UDCCSR_FEF; ++ ++ /* ep0 needs special care */ ++ if (!ep->desc) { ++ start_watchdog(ep->dev); ++ ep->dev->req_pending = 0; ++ ep->dev->ep0state = EP0_STALL; ++ LED_EP0_OFF; ++ ++ /* and bulk/intr endpoints like dropping stalls too */ ++ } else { ++ unsigned i; ++ for (i = 0; i < 1000; i += 20) { ++ if (*ep->reg_udccsr & UDCCSR_SST) ++ break; ++ udelay(20); ++ } ++ } ++ local_irq_restore(flags); ++ ++ DBG(DBG_VERBOSE, "%s halt\n", _ep->name); ++ return 0; ++} ++ ++static int pxa27x_ep_fifo_status(struct usb_ep *_ep) ++{ ++ struct pxa27x_ep *ep; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return -ENODEV; ++ } ++ /* pxa can't report unclaimed bytes from IN fifos */ ++ if (ep->dir_in) ++ return -EOPNOTSUPP; ++ if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN ++ || (*ep->reg_udccsr & UDCCSR_FS) == 0) ++ return 0; ++ else ++ return (*ep->reg_udcbcr & 0xfff) + 1; ++} ++ ++static void pxa27x_ep_fifo_flush(struct usb_ep *_ep) ++{ ++ struct pxa27x_ep *ep; ++ ++ ep = container_of(_ep, struct pxa27x_ep, ep); ++ if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) { ++ DMSG("%s, bad ep\n", __FUNCTION__); ++ return; ++ } ++ ++ /* toggle and halt bits stay unchanged */ ++ ++ /* for OUT, just read and discard the FIFO contents. */ ++ if (!ep->dir_in) { ++ while (((*ep->reg_udccsr) & UDCCSR_BNE) != 0) ++ (void)*ep->reg_udcdr; ++ return; ++ } ++ ++ /* most IN status is the same, but ISO can't stall */ ++ *ep->reg_udccsr = UDCCSR_PC | UDCCSR_FST | UDCCSR_TRN ++ | (ep->ep_type == USB_ENDPOINT_XFER_ISOC) ++ ? 0 : UDCCSR_SST; ++} ++ ++static struct usb_ep_ops pxa27x_ep_ops = { ++ .enable = pxa27x_ep_enable, ++ .disable = pxa27x_ep_disable, ++ ++ .alloc_request = pxa27x_ep_alloc_request, ++ .free_request = pxa27x_ep_free_request, ++ ++#warning "CHECK comemnts here" ++ //.alloc_buffer = pxa27x_ep_alloc_buffer, ++ //.free_buffer = pxa27x_ep_free_buffer, ++ ++ .queue = pxa27x_ep_queue, ++ .dequeue = pxa27x_ep_dequeue, ++ ++ .set_halt = pxa27x_ep_set_halt, ++ .fifo_status = pxa27x_ep_fifo_status, ++ .fifo_flush = pxa27x_ep_fifo_flush, ++}; ++ ++/* --------------------------------------------------------------------------- ++ * device-scoped parts of the api to the usb controller hardware ++ * --------------------------------------------------------------------------- ++ */ ++ ++static inline void validate_fifo_size(struct pxa27x_ep *pxa_ep, u8 bmAttributes) ++{ ++ switch (bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { ++ case USB_ENDPOINT_XFER_CONTROL: ++ pxa_ep->fifo_size = EP0_FIFO_SIZE; ++ break; ++ case USB_ENDPOINT_XFER_ISOC: ++ pxa_ep->fifo_size = ISO_FIFO_SIZE; ++ break; ++ case USB_ENDPOINT_XFER_BULK: ++ pxa_ep->fifo_size = BULK_FIFO_SIZE; ++ break; ++ case USB_ENDPOINT_XFER_INT: ++ pxa_ep->fifo_size = INT_FIFO_SIZE; ++ break; ++ default: ++ break; ++ } ++} ++ ++#define NAME_SIZE 18 ++struct usb_ep *pxa27x_ep_alloc(struct usb_gadget *gadget, ++ struct usb_endpoint_descriptor *desc, int config, ++ int interface, int alt) ++{ ++ u32 tmp; ++ unsigned i; ++ char *name; ++ struct usb_ep *ep = NULL; ++ struct pxa27x_ep *pxa_ep = NULL; ++ struct pxa27x_udc *dev = the_controller; ++ ++ DMSG("pxa27x_config_ep is called\n"); ++ DMSG(" usb endpoint descriptor is:\n" ++ " bLength:%d\n" ++ " bDescriptorType:%x\n" ++ " bEndpointAddress:%x\n" ++ " bmAttributes:%x\n" ++ " wMaxPacketSize:%d\n", ++ desc->bLength, ++ desc->bDescriptorType, desc->bEndpointAddress, ++ desc->bmAttributes, desc->wMaxPacketSize); ++ ++ for (i = 1; i < UDC_EP_NUM; i++) { ++ if (!dev->ep[i].assigned) { ++ pxa_ep = &dev->ep[i]; ++ pxa_ep->assigned = 1; ++ pxa_ep->ep_num = i; ++ break; ++ } ++ } ++ if (unlikely(i == UDC_EP_NUM)) { ++ printk(KERN_ERR __FILE__ ": Failed to find a spare endpoint\n"); ++ return ep; ++ } ++ ++ ep = &pxa_ep->ep; ++ ++ pxa_ep->dev = dev; ++ pxa_ep->desc = desc; ++ pxa_ep->pio_irqs = pxa_ep->dma_irqs = 0; ++ pxa_ep->dma = -1; ++ ++ if (!(desc->bEndpointAddress & 0xF)) ++ desc->bEndpointAddress |= i; ++ ++ if (!(desc->wMaxPacketSize)) { ++ validate_fifo_size(pxa_ep, desc->bmAttributes); ++ desc->wMaxPacketSize = pxa_ep->fifo_size; ++ } else ++ pxa_ep->fifo_size = desc->wMaxPacketSize; ++ ++ pxa_ep->dir_in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0; ++ pxa_ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; ++ pxa_ep->stopped = 1; ++ pxa_ep->dma_con = 0; ++ pxa_ep->config = config; ++ pxa_ep->interface = interface; ++ pxa_ep->aisn = alt; ++ ++ pxa_ep->reg_udccsr = &UDCCSR0 + i; ++ pxa_ep->reg_udcbcr = &UDCBCR0 + i; ++ pxa_ep->reg_udcdr = &UDCDR0 + i; ++ pxa_ep->reg_udccr = &UDCCRA - 1 + i; ++#ifdef USE_DMA ++ pxa_ep->reg_drcmr = &DRCMR24 + i; ++#endif ++ ++ DMSG("udccsr=0x%8x, udcbcr=0x%8x, udcdr=0x%8x," ++ "udccr0=0x%8x\n", ++ (unsigned)pxa_ep->reg_udccsr, ++ (unsigned)pxa_ep->reg_udcbcr, ++ (unsigned)pxa_ep->reg_udcdr, (unsigned)pxa_ep->reg_udccr); ++ ++ /* Configure UDCCR */ ++ tmp = 0; ++ tmp |= (pxa_ep->config << UDCCONR_CN_S) & UDCCONR_CN; ++#if 0 ++ tmp |= (pxa_ep->interface << UDCCONR_IN_S) & UDCCONR_IN; ++ tmp |= (pxa_ep->aisn << UDCCONR_AISN_S) & UDCCONR_AISN; ++#else ++ tmp |= (0 << UDCCONR_IN_S) & UDCCONR_IN; ++ tmp |= (0 << UDCCONR_AISN_S) & UDCCONR_AISN; ++#endif ++ tmp |= (desc->bEndpointAddress << UDCCONR_EN_S) & UDCCONR_EN; ++ tmp |= (pxa_ep->ep_type << UDCCONR_ET_S) & UDCCONR_ET; ++ tmp |= (pxa_ep->dir_in) ? UDCCONR_ED : 0; ++ tmp |= (min(pxa_ep->fifo_size, (unsigned)desc->wMaxPacketSize) ++ << UDCCONR_MPS_S) & UDCCONR_MPS; ++ tmp |= UDCCONR_DE | UDCCONR_EE; ++#if 0 ++ tmp |= UDCCONR_EE; ++#endif ++ ++ *pxa_ep->reg_udccr = tmp; ++ ++#ifdef USE_DMA ++ /* Only BULK use DMA */ ++ if ((pxa_ep->ep_type & USB_ENDPOINT_XFERTYPE_MASK) ++ == USB_ENDPOINT_XFER_BULK) ++ *pxa_ep->reg_udccsr = UDCCSR_DME; ++#endif ++ ++ DMSG("UDCCR: 0x%p is 0x%x\n", pxa_ep->reg_udccr, *pxa_ep->reg_udccr); ++ ++ /* Fill ep name */ ++ name = kmalloc(NAME_SIZE, GFP_KERNEL); ++ if (!name) { ++ printk(KERN_ERR "%s: Error\n", __FUNCTION__); ++ return NULL; ++ } ++ ++ switch (pxa_ep->ep_type) { ++ case USB_ENDPOINT_XFER_BULK: ++ sprintf(name, "Bulk-%s-%d", (pxa_ep->dir_in ? "in" : "out"), i); ++ break; ++ case USB_ENDPOINT_XFER_INT: ++ sprintf(name, "Interrupt-%s-%d", (pxa_ep->dir_in ? ++ "in" : "out"), i); ++ break; ++ default: ++ sprintf(name, "endpoint-%s-%d", (pxa_ep->dir_in ? ++ "in" : "out"), i); ++ break; ++ } ++ ep->name = name; ++ ++ ep->ops = &pxa27x_ep_ops; ++ ep->maxpacket = min((ushort) pxa_ep->fifo_size, desc->wMaxPacketSize); ++ ++ list_add_tail(&ep->ep_list, &gadget->ep_list); ++ return ep; ++} ++ ++static int pxa27x_udc_get_frame(struct usb_gadget *_gadget) ++{ ++ return (UDCFNR & 0x3FF); ++} ++ ++static int pxa27x_udc_wakeup(struct usb_gadget *_gadget) ++{ ++ /* host may not have enabled remote wakeup */ ++ if ((UDCCR & UDCCR_DWRE) == 0) ++ return -EHOSTUNREACH; ++ udc_set_mask_UDCCR(UDCCR_UDR); ++ return 0; ++} ++ ++static const struct usb_gadget_ops pxa27x_udc_ops = { ++ .ep_alloc = pxa27x_ep_alloc, ++ .get_frame = pxa27x_udc_get_frame, ++ .wakeup = pxa27x_udc_wakeup, ++ /* current versions must always be self-powered */ ++}; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#ifdef UDC_PROC_FILE ++ ++static const char proc_node_name[] = "driver/udc"; ++ ++static int ++udc_proc_read(char *page, char **start, off_t off, int count, ++ int *eof, void *_dev) ++{ ++ char *buf = page; ++ struct pxa27x_udc *dev = _dev; ++ char *next = buf; ++ unsigned size = count; ++ unsigned long flags; ++ int i, t; ++ u32 tmp; ++ ++ if (off != 0) ++ return 0; ++ ++ local_irq_save(flags); ++ ++ /* basic device status */ ++ t = scnprintf(next, size, DRIVER_DESC "\n" ++ "%s version: %s\nGadget driver: %s\n", ++ driver_name, DRIVER_VERSION SIZE_STR DMASTR, ++ dev->driver ? dev->driver->driver.name : "(none)"); ++ size -= t; ++ next += t; ++ ++ /* registers for device and ep0 */ ++ t = scnprintf(next, size, ++ "uicr %02X.%02X, usir %02X.%02x, ufnr %02X\n", ++ UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR); ++ size -= t; ++ next += t; ++ ++ tmp = UDCCR; ++ t = scnprintf(next, size, ++ "udccr %02X =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", ++ tmp, (tmp & UDCCR_OEN) ? " oen" : "", ++ (tmp & UDCCR_AALTHNP) ? " aalthnp" : "", ++ (tmp & UDCCR_AHNP) ? " rem" : "", ++ (tmp & UDCCR_BHNP) ? " rstir" : "", ++ (tmp & UDCCR_DWRE) ? " dwre" : "", ++ (tmp & UDCCR_SMAC) ? " smac" : "", ++ (tmp & UDCCR_EMCE) ? " emce" : "", ++ (tmp & UDCCR_UDR) ? " udr" : "", ++ (tmp & UDCCR_UDA) ? " uda" : "", ++ (tmp & UDCCR_UDE) ? " ude" : "", ++ (tmp & UDCCR_ACN) >> UDCCR_ACN_S, ++ (tmp & UDCCR_AIN) >> UDCCR_AIN_S, ++ (tmp & UDCCR_AAISN) >> UDCCR_AAISN_S); ++ ++ size -= t; ++ next += t; ++ ++ tmp = UDCCSR0; ++ t = scnprintf(next, size, ++ "udccsr0 %02X =%s%s%s%s%s%s%s\n", tmp, ++ (tmp & UDCCSR0_SA) ? " sa" : "", ++ (tmp & UDCCSR0_RNE) ? " rne" : "", ++ (tmp & UDCCSR0_FST) ? " fst" : "", ++ (tmp & UDCCSR0_SST) ? " sst" : "", ++ (tmp & UDCCSR0_DME) ? " dme" : "", ++ (tmp & UDCCSR0_IPR) ? " ipr" : "", ++ (tmp & UDCCSR0_OPC) ? " opc" : ""); ++ size -= t; ++ next += t; ++ ++ if (!dev->driver) ++ goto done; ++ ++ t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n", ++ dev->stats.write.bytes, dev->stats.write.ops, ++ dev->stats.read.bytes, dev->stats.read.ops, ++ dev->stats.irqs); ++ size -= t; ++ next += t; ++ ++ /* dump endpoint queues */ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ struct pxa27x_request *req; ++ int t; ++ ++ if (i != 0) { ++ const struct usb_endpoint_descriptor *d; ++ ++ d = ep->desc; ++ if (!d) ++ continue; ++ tmp = *dev->ep[i].reg_udccsr; ++ t = scnprintf(next, size, ++ "%s max %d %s udccs %02x udccr:0x%x\n", ++ ep->ep.name, ++ le16_to_cpu(d->wMaxPacketSize), ++ (ep->dma >= 0) ? "dma" : "pio", tmp, ++ *dev->ep[i].reg_udccr); ++ /* TODO translate all five groups of udccs bits! */ ++ ++ } else /* ep0 should only have one transfer queued */ ++ t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n", ++ ep->pio_irqs); ++ if (t <= 0 || t > size) ++ goto done; ++ size -= t; ++ next += t; ++ ++ if (list_empty(&ep->queue)) { ++ t = scnprintf(next, size, "\t(nothing queued)\n"); ++ if (t <= 0 || t > size) ++ goto done; ++ size -= t; ++ next += t; ++ continue; ++ } ++ list_for_each_entry(req, &ep->queue, queue) { ++#ifdef USE_DMA ++ if (ep->dma >= 0 && req->queue.prev == &ep->queue) ++ t = scnprintf(next, size, ++ "\treq %p len %d/%d " ++ "buf %p (dma%d dcmd %08x)\n", ++ &req->req, req->req.actual, ++ req->req.length, req->req.buf, ++ ep->dma, DCMD(ep->dma) ++ /* low 13 bits == bytes-to-go */ ++ ); ++ else ++#endif ++ t = scnprintf(next, size, ++ "\treq %p len %d/%d buf %p\n", ++ &req->req, req->req.actual, ++ req->req.length, req->req.buf); ++ if (t <= 0 || t > size) ++ goto done; ++ size -= t; ++ next += t; ++ } ++ } ++ ++ done: ++ local_irq_restore(flags); ++ *eof = 1; ++ return count - size; ++} ++ ++#define create_proc_files() \ ++ create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev) ++#define remove_proc_files() \ ++ remove_proc_entry(proc_node_name, NULL) ++ ++#else /* !UDC_PROC_FILE */ ++#define create_proc_files() do {} while (0) ++#define remove_proc_files() do {} while (0) ++ ++#endif /* UDC_PROC_FILE */ ++ ++/* "function" sysfs attribute */ ++static ssize_t ++show_function(struct device *_dev, struct device_attribute *attr, char *buf) ++{ ++ struct pxa27x_udc *dev = dev_get_drvdata(_dev); ++ ++ if (!dev->driver ++ || !dev->driver->function ++ || strlen(dev->driver->function) > PAGE_SIZE) ++ return 0; ++ return scnprintf(buf, PAGE_SIZE, "%s\n", dev->driver->function); ++} ++ ++static DEVICE_ATTR(function, S_IRUGO, show_function, NULL); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * udc_disable - disable USB device controller ++ */ ++static void udc_disable(struct pxa27x_udc *dev) ++{ ++ UDCICR0 = 0x00000000; ++ UDCICR1 = 0x00000000; ++ ++ udc_clear_mask_UDCCR(UDCCR_UDE); ++ ++ /* Disable clock for USB device */ ++ pxa_set_cken(CKEN_USB, 0); ++ ++ ep0_idle(dev); ++ dev->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ pullup_off(); ++} ++ ++/* ++ * udc_reinit - initialize software state ++ */ ++static void udc_reinit(struct pxa27x_udc *dev) ++{ ++ u32 i; ++ ++ dev->ep0state = EP0_IDLE; ++ ++ /* basic endpoint records init */ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->stopped = 0; ++ ep->pio_irqs = ep->dma_irqs = 0; ++ } ++ dev->configuration = 0; ++ dev->interface = 0; ++ dev->alternate = 0; ++ /* the rest was statically initialized, and is read-only */ ++} ++ ++/* until it's enabled, this UDC should be completely invisible ++ * to any USB host. ++ */ ++static void udc_enable(struct pxa27x_udc *dev) ++{ ++ udc_clear_mask_UDCCR(UDCCR_UDE); ++ ++ /* Enable clock for USB device */ ++ pxa_set_cken(CKEN_USB, 1); ++ ++ UDCICR0 = UDCICR1 = 0; ++ ++ ep0_idle(dev); ++ dev->gadget.speed = USB_SPEED_FULL; ++ dev->stats.irqs = 0; ++ ++ udc_set_mask_UDCCR(UDCCR_UDE); ++ udelay(2); ++ if (UDCCR & UDCCR_EMCE) { ++ printk(KERN_ERR ++ ": There are error in configuration, udc disabled\n"); ++ } ++ ++ /* caller must be able to sleep in order to cope ++ * with startup transients. ++ */ ++ msleep(100); ++ ++ /* enable suspend/resume and reset irqs */ ++ UDCICR1 = UDCICR1_IECC | UDCICR1_IERU | UDCICR1_IESU | UDCICR1_IERS; ++ ++ /* enable ep0 irqs */ ++ UDCICR0 = UDCICR_INT(0, UDCICR_INT_MASK); ++#if 0 ++ for (i = 1; i < UDC_EP_NUM; i++) { ++ if (dev->ep[i].assigned) ++ pio_irq_enable(i); ++ } ++#endif ++ ++ pullup_on(); ++} ++ ++/* when a driver is successfully registered, it will receive ++ * control requests including set_configuration(), which enables ++ * non-control requests. then usb traffic follows until a ++ * disconnect is reported. then a host may connect again, or ++ * the driver might get unbound. ++ */ ++int usb_gadget_register_driver(struct usb_gadget_driver *driver) ++{ ++ struct pxa27x_udc *dev = the_controller; ++ int retval; ++ ++ DMSG("dev=0x%x, driver=0x%x, speed=%d, " ++ "bind=0x%x, unbind=0x%x, disconnect=0x%x, setup=0x%x\n", ++ (unsigned)dev, (unsigned)driver, driver->speed, ++ (unsigned)driver->bind, (unsigned)driver->unbind, ++ (unsigned)driver->disconnect, (unsigned)driver->setup); ++ ++ if (!driver || driver->speed != USB_SPEED_FULL ++ || !driver->bind ++ || !driver->unbind || !driver->disconnect || !driver->setup) ++ return -EINVAL; ++ if (!dev) ++ return -ENODEV; ++ if (dev->driver) ++ return -EBUSY; ++ ++ /* first hook up the driver ... */ ++ dev->driver = driver; ++ dev->gadget.dev.driver = &driver->driver; ++ ++ retval = device_add(&dev->gadget.dev); ++ if (retval) { ++ DMSG("unable to add device for %s --> error %d\n", ++ driver->driver.name, retval); ++ goto device_add_error; ++ } ++ retval = driver->bind(&dev->gadget); ++ if (retval) { ++ DMSG("bind to driver %s --> error %d\n", ++ driver->driver.name, retval); ++ goto device_bind_error; ++ } ++ retval = device_create_file(dev->dev, &dev_attr_function); ++ if (retval) { ++ DMSG("unable to create file for %s --> error %d\n", ++ driver->driver.name, retval); ++ goto create_file_error; ++ } ++ ++ /* ... then enable host detection and ep0; and we're ready ++ * for set_configuration as well as eventual disconnect. ++ * NOTE: this shouldn't power up until later. ++ */ ++ DMSG("registered gadget driver '%s'\n", driver->driver.name); ++ udc_enable(dev); ++ dump_state(dev); ++ ++ return 0; ++ ++ create_file_error: ++ driver->unbind(&dev->gadget); ++ ++ device_bind_error: ++ device_del(&dev->gadget.dev); ++ ++ device_add_error: ++ dev->driver = 0; ++ dev->gadget.dev.driver = 0; ++ ++ return retval; ++} ++ ++EXPORT_SYMBOL(usb_gadget_register_driver); ++ ++static void ++stop_activity(struct pxa27x_udc *dev, struct usb_gadget_driver *driver) ++{ ++ int i; ++ ++ DMSG("Trace path 1\n"); ++ /* don't disconnect drivers more than once */ ++ if (dev->gadget.speed == USB_SPEED_UNKNOWN) ++ driver = 0; ++ dev->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->stopped = 1; ++ nuke(ep, -ESHUTDOWN); ++ } ++ del_timer_sync(&dev->timer); ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (driver) ++ driver->disconnect(&dev->gadget); ++ ++ /* re-init driver-visible data structures */ ++ udc_reinit(dev); ++} ++ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ struct pxa27x_udc *dev = the_controller; ++ ++ if (!dev) ++ return -ENODEV; ++ if (!driver || driver != dev->driver) ++ return -EINVAL; ++ ++ local_irq_disable(); ++ udc_disable(dev); ++ stop_activity(dev, driver); ++ local_irq_enable(); ++ ++ driver->unbind(&dev->gadget); ++ dev->driver = 0; ++ ++ device_del(&dev->gadget.dev); ++ device_remove_file(dev->dev, &dev_attr_function); ++ ++ DMSG("unregistered gadget driver '%s'\n", driver->driver.name); ++ dump_state(dev); ++ return 0; ++} ++ ++EXPORT_SYMBOL(usb_gadget_unregister_driver); ++ ++#ifndef enable_disconnect_irq ++#define enable_disconnect_irq() do {} while (0) ++#define disable_disconnect_irq() do {} while (0) ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++static inline void clear_ep_state(struct pxa27x_udc *dev) ++{ ++ unsigned i; ++ ++ /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint ++ * fifos, and pending transactions mustn't be continued in any case. ++ */ ++ for (i = 1; i < UDC_EP_NUM; i++) ++ nuke(&dev->ep[i], -ECONNABORTED); ++} ++ ++static void udc_watchdog(unsigned long _dev) ++{ ++ struct pxa27x_udc *dev = (void *)_dev; ++ ++ local_irq_disable(); ++ if (dev->ep0state == EP0_STALL ++ && (UDCCSR0 & UDCCSR0_FST) == 0 && (UDCCSR0 & UDCCSR0_SST) == 0) { ++ UDCCSR0 = UDCCSR0_FST | UDCCSR0_FTF; ++ DBG(DBG_VERBOSE, "ep0 re-stall\n"); ++ start_watchdog(dev); ++ } ++ local_irq_enable(); ++} ++ ++static void handle_ep0(struct pxa27x_udc *dev) ++{ ++ u32 udccsr0 = UDCCSR0; ++ struct pxa27x_ep *ep = &dev->ep[0]; ++ struct pxa27x_request *req; ++ union { ++ struct usb_ctrlrequest r; ++ u8 raw[8]; ++ u32 word[2]; ++ } u; ++ ++ if (list_empty(&ep->queue)) ++ req = 0; ++ else ++ req = list_entry(ep->queue.next, struct pxa27x_request, queue); ++ ++ /* clear stall status */ ++ if (udccsr0 & UDCCSR0_SST) { ++ nuke(ep, -EPIPE); ++ UDCCSR0 = UDCCSR0_SST; ++ del_timer(&dev->timer); ++ ep0_idle(dev); ++ } ++ ++ /* previous request unfinished? non-error iff back-to-back ... */ ++ if ((udccsr0 & UDCCSR0_SA) != 0 && dev->ep0state != EP0_IDLE) { ++ nuke(ep, 0); ++ del_timer(&dev->timer); ++ ep0_idle(dev); ++ } ++ ++ switch (dev->ep0state) { ++ case EP0_NO_ACTION: ++ printk(KERN_INFO "%s: Busy\n", __FUNCTION__); ++ /*Fall through */ ++ case EP0_IDLE: ++ /* late-breaking status? */ ++ udccsr0 = UDCCSR0; ++ ++ /* start control request? */ ++ if (likely((udccsr0 & (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE)) ++ == (UDCCSR0_OPC | UDCCSR0_SA | UDCCSR0_RNE))) { ++ int i; ++ ++ nuke(ep, -EPROTO); ++ /* read SETUP packet */ ++ for (i = 0; i < 2; i++) { ++ if (unlikely(!(UDCCSR0 & UDCCSR0_RNE))) { ++ bad_setup: ++ DMSG("SETUP %d!\n", i); ++ goto stall; ++ } ++ u.word[i] = UDCDR0; ++ } ++ if (unlikely((UDCCSR0 & UDCCSR0_RNE) != 0)) ++ goto bad_setup; ++ ++ le16_to_cpus(&u.r.wValue); ++ le16_to_cpus(&u.r.wIndex); ++ le16_to_cpus(&u.r.wLength); ++ ++ LED_EP0_ON; ++ ++ DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ u.r.bRequestType, u.r.bRequest, ++ u.r.wValue, u.r.wIndex, u.r.wLength); ++ /* cope with automagic for some standard requests. */ ++ dev->req_std = (u.r.bRequestType & USB_TYPE_MASK) ++ == USB_TYPE_STANDARD; ++ dev->req_config = 0; ++ dev->req_pending = 1; ++#if 0 ++ switch (u.r.bRequest) { ++ /* hardware was supposed to hide this */ ++ case USB_REQ_SET_CONFIGURATION: ++ case USB_REQ_SET_INTERFACE: ++ case USB_REQ_SET_ADDRESS: ++ printk(KERN_ERR "Should not come here\n"); ++ break; ++ } ++ ++#endif ++ if (u.r.bRequestType & USB_DIR_IN) ++ dev->ep0state = EP0_IN_DATA_PHASE; ++ else ++ dev->ep0state = EP0_OUT_DATA_PHASE; ++ i = dev->driver->setup(&dev->gadget, &u.r); ++ ++ if (i < 0) { ++ /* hardware automagic preventing STALL... */ ++ if (dev->req_config) { ++ /* hardware sometimes neglects to tell ++ * tell us about config change events, ++ * so later ones may fail... ++ */ ++ WARN("config change %02x fail %d?\n", ++ u.r.bRequest, i); ++ return; ++ /* TODO experiment: if has_cfr, ++ * hardware didn't ACK; maybe we ++ * could actually STALL! ++ */ ++ } ++ DBG(DBG_VERBOSE, "protocol STALL, " ++ "%02x err %d\n", UDCCSR0, i); ++ stall: ++ /* the watchdog timer helps deal with cases ++ * where udc seems to clear FST wrongly, and ++ * then NAKs instead of STALLing. ++ */ ++ ep0start(dev, UDCCSR0_FST | UDCCSR0_FTF, ++ "stall"); ++ start_watchdog(dev); ++ dev->ep0state = EP0_STALL; ++ LED_EP0_OFF; ++ ++ /* deferred i/o == no response yet */ ++ } else if (dev->req_pending) { ++ if (likely(dev->ep0state == EP0_IN_DATA_PHASE ++ || dev->req_std || u.r.wLength)) ++ ep0start(dev, 0, "defer"); ++ else ++ ep0start(dev, UDCCSR0_IPR, "defer/IPR"); ++ } ++ ++ /* expect at least one data or status stage irq */ ++ return; ++ ++ } else { ++ /* some random early IRQ: ++ * - we acked FST ++ * - IPR cleared ++ * - OPC got set, without SA (likely status stage) ++ */ ++ UDCCSR0 = udccsr0 & (UDCCSR0_SA | UDCCSR0_OPC); ++ } ++ break; ++ case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */ ++ if (udccsr0 & UDCCSR0_OPC) { ++ UDCCSR0 = UDCCSR0_OPC | UDCCSR0_FTF; ++ DBG(DBG_VERBOSE, "ep0in premature status\n"); ++ if (req) ++ done(ep, req, 0); ++ ep0_idle(dev); ++ } else { /* irq was IPR clearing */ ++ ++ if (req) { ++ /* this IN packet might finish the request */ ++ (void)write_ep0_fifo(ep, req); ++ } /* else IN token before response was written */ ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */ ++ if (udccsr0 & UDCCSR0_OPC) { ++ if (req) { ++ /* this OUT packet might finish the request */ ++ if (read_ep0_fifo(ep, req)) ++ done(ep, req, 0); ++ /* else more OUT packets expected */ ++ } /* else OUT token before read was issued */ ++ } else { /* irq was IPR clearing */ ++ ++ DBG(DBG_VERBOSE, "ep0out premature status\n"); ++ if (req) ++ done(ep, req, 0); ++ ep0_idle(dev); ++ } ++ break; ++ case EP0_STALL: ++ UDCCSR0 = UDCCSR0_FST; ++ break; ++ } ++ UDCISR0 = UDCISR_INT(0, UDCISR_INT_MASK); ++} ++ ++static void handle_ep(struct pxa27x_ep *ep) ++{ ++ struct pxa27x_request *req; ++ int completed; ++ u32 udccsr = 0; ++ ++ DMSG("%s is called\n", __FUNCTION__); ++ do { ++ completed = 0; ++ if (likely(!list_empty(&ep->queue))) { ++ req = list_entry(ep->queue.next, ++ struct pxa27x_request, queue); ++ } else ++ req = 0; ++ ++#if 0 ++ udccsr = *ep->reg_udccsr; ++#endif ++ DMSG("%s: req:%p, udcisr0:0x%x udccsr %p:0x%x\n", __FUNCTION__, ++ req, UDCISR0, ep->reg_udccsr, *ep->reg_udccsr); ++ if (unlikely(ep->dir_in)) { ++ udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr; ++ if (unlikely(udccsr)) ++ *ep->reg_udccsr = udccsr; ++ ++ if (req && likely((*ep->reg_udccsr & UDCCSR_FS) != 0)) ++ completed = write_fifo(ep, req); ++ ++ } else { ++ udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr; ++ if (unlikely(udccsr)) ++ *ep->reg_udccsr = udccsr; ++ ++ /* fifos can hold packets, ready for reading... */ ++ if (likely(req)) { ++ completed = read_fifo(ep, req); ++ } else { ++ pio_irq_disable(ep->ep_num); ++ *ep->reg_udccsr = UDCCSR_FEF; ++ DMSG("%s: no req for out data\n", __FUNCTION__); ++ } ++ } ++ ep->pio_irqs++; ++ } while (completed); ++} ++ ++static void pxa27x_change_configuration(struct pxa27x_udc *dev) ++{ ++ struct usb_ctrlrequest req; ++ ++ req.bRequestType = 0; ++ req.bRequest = USB_REQ_SET_CONFIGURATION; ++ req.wValue = dev->configuration; ++ req.wIndex = 0; ++ req.wLength = 0; ++ ++ dev->ep0state = EP0_NO_ACTION; ++ dev->driver->setup(&dev->gadget, &req); ++ ++} ++ ++static void pxa27x_change_interface(struct pxa27x_udc *dev) ++{ ++ struct usb_ctrlrequest req; ++ ++ req.bRequestType = USB_RECIP_INTERFACE; ++ req.bRequest = USB_REQ_SET_INTERFACE; ++ req.wValue = dev->alternate; ++ req.wIndex = dev->interface; ++ req.wLength = 0; ++ ++ dev->ep0state = EP0_NO_ACTION; ++ dev->driver->setup(&dev->gadget, &req); ++} ++ ++/* ++ * pxa27x_udc_irq - interrupt handler ++ * ++ * avoid delays in ep0 processing. the control handshaking isn't always ++ * under software control (pxa250c0 and the pxa255 are better), and delays ++ * could cause usb protocol errors. ++ */ ++static irqreturn_t pxa27x_udc_irq(int irq, void *_dev) ++{ ++ struct pxa27x_udc *dev = _dev; ++ int handled; ++ ++ dev->stats.irqs++; ++ HEX_DISPLAY(dev->stats.irqs); ++ ++ DBG(DBG_VERBOSE, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, " ++ "UDCCR:0x%08x\n", UDCISR0, UDCISR1, UDCCR); ++ ++ do { ++ u32 udcir = UDCISR1 & 0xF8000000; ++ ++ handled = 0; ++ ++ /* SUSpend Interrupt Request */ ++ if (unlikely(udcir & UDCISR1_IRSU)) { ++ UDCISR1 = UDCISR1_IRSU; ++ handled = 1; ++ DBG(DBG_VERBOSE, "USB suspend\n"); ++ if (dev->gadget.speed != USB_SPEED_UNKNOWN ++ && dev->driver && dev->driver->suspend) ++ dev->driver->suspend(&dev->gadget); ++ ep0_idle(dev); ++ } ++ ++ /* RESume Interrupt Request */ ++ if (unlikely(udcir & UDCISR1_IRRU)) { ++ UDCISR1 = UDCISR1_IRRU; ++ handled = 1; ++ DBG(DBG_VERBOSE, "USB resume\n"); ++ ++ if (dev->gadget.speed != USB_SPEED_UNKNOWN ++ && dev->driver && dev->driver->resume) ++ dev->driver->resume(&dev->gadget); ++ } ++ ++ if (unlikely(udcir & UDCISR1_IRCC)) { ++ unsigned config, interface, alternate; ++ ++ handled = 1; ++ DBG(DBG_VERBOSE, "USB SET_CONFIGURATION or " ++ "SET_INTERFACE command received\n"); ++ ++ UDCCR |= UDCCR_SMAC; ++ ++ config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S; ++ ++ if (dev->configuration != config) { ++ dev->configuration = config; ++ pxa27x_change_configuration(dev); ++ } ++ ++ interface = (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S; ++ alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S; ++ ++ if ((dev->configuration != interface) || ++ (dev->alternate != alternate)) { ++ dev->interface = config; ++ dev->alternate = alternate; ++ pxa27x_change_interface(dev); ++ } ++ ++ UDCISR1 = UDCISR1_IRCC; ++ DMSG("%s: con:%d,inter:%d,alt:%d\n", ++ __FUNCTION__, config, interface, alternate); ++ } ++ ++ /* ReSeT Interrupt Request - USB reset */ ++ if (unlikely(udcir & UDCISR1_IRRS)) { ++ UDCISR1 = UDCISR1_IRRS; ++ handled = 1; ++ ++ if ((UDCCR & UDCCR_UDA) == 0) { ++ DBG(DBG_VERBOSE, "SB reset start\n"); ++ ++ /* reset driver and endpoints, ++ * in case that's not yet done ++ */ ++ stop_activity(dev, dev->driver); ++ ++ } ++ INFO("USB reset\n"); ++ dev->gadget.speed = USB_SPEED_FULL; ++ memset(&dev->stats, 0, sizeof dev->stats); ++ ++ } else { ++ u32 udcisr0 = UDCISR0; ++ u32 udcisr1 = UDCISR1 & 0xFFFF; ++ int i; ++ ++ if (unlikely(!udcisr0 && !udcisr1)) ++ continue; ++ ++ DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", udcisr1, ++ udcisr0); ++ ++ /* control traffic */ ++ if (udcisr0 & UDCISR0_IR0) { ++ dev->ep[0].pio_irqs++; ++ handle_ep0(dev); ++ handled = 1; ++ } ++ ++ udcisr0 >>= 2; ++ /* endpoint data transfers */ ++ for (i = 1; udcisr0 != 0 && i < 16; udcisr0 >>= 2, i++) { ++ UDCISR0 = UDCISR_INT(i, UDCISR_INT_MASK); ++ ++ if (udcisr0 & UDC_INT_FIFOERROR) ++ printk(KERN_ERR ++ " Endpoint %d Fifo error\n", i); ++ if (udcisr0 & UDC_INT_PACKETCMP) { ++ handle_ep(&dev->ep[i]); ++ handled = 1; ++ } ++ ++ } ++ ++ for (i = 0; udcisr1 != 0 && i < 8; udcisr1 >>= 2, i++) { ++ UDCISR1 = UDCISR_INT(i, UDCISR_INT_MASK); ++ ++ if (udcisr1 & UDC_INT_FIFOERROR) { ++ printk(KERN_ERR ++ " Endpoint %d fifo error\n", ++ (i + 16)); ++ } ++ ++ if (udcisr1 & UDC_INT_PACKETCMP) { ++ handle_ep(&dev->ep[i + 16]); ++ handled = 1; ++ } ++ } ++ } ++ ++ /* we could also ask for 1 msec SOF (SIR) interrupts */ ++ ++ } while (handled); ++ return IRQ_HANDLED; ++} ++ ++static void udc_init_ep(struct pxa27x_udc *dev) ++{ ++ int i; ++ ++ INIT_LIST_HEAD(&dev->gadget.ep_list); ++ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); ++ ++ for (i = 0; i < UDC_EP_NUM; i++) { ++ struct pxa27x_ep *ep = &dev->ep[i]; ++ ++ ep->dma = -1; ++ if (i != 0) { ++ memset(ep, 0, sizeof(*ep)); ++ } ++ INIT_LIST_HEAD(&ep->queue); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void nop_release(struct device *dev) ++{ ++ DMSG("%s %s\n", __FUNCTION__, dev->bus_id); ++} ++ ++/* this uses load-time allocation and initialization (instead of ++ * doing it at run-time) to save code, eliminate fault paths, and ++ * be more obviously correct. ++ */ ++static struct pxa27x_udc memory = { ++ .gadget = { ++ .ops = &pxa27x_udc_ops, ++ .ep0 = &memory.ep[0].ep, ++ .name = driver_name, ++ .dev = { ++ .bus_id = "gadget", ++ .release = nop_release, ++ }, ++ }, ++ ++ /* control endpoint */ ++ .ep[0] = { ++ .ep = { ++ .name = ep0name, ++ .ops = &pxa27x_ep_ops, ++ .maxpacket = EP0_FIFO_SIZE, ++ }, ++ .dev = &memory, ++ .reg_udccsr = &UDCCSR0, ++ .reg_udcdr = &UDCDR0, ++ } ++}; ++ ++#define CP15R0_VENDOR_MASK 0xffffe000 ++ ++#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/xscale */ ++ ++/* ++ * probe - binds to the platform device ++ */ ++static int __init pxa27x_udc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct pxa27x_udc *udc = &memory; ++ int irq, retval; ++ u32 chiprev; ++ ++ /* insist on Intel/ARM/XScale */ ++ asm("mrc%? p15, 0, %0, c0, c0":"=r"(chiprev)); ++ if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) { ++ printk(KERN_ERR "%s: not XScale!\n", driver_name); ++ return -ENODEV; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) ++ return -ENODEV; ++ pr_debug("%s: IRQ %d\n", driver_name, irq); ++ ++ /* other non-static parts of init */ ++ udc->dev = dev; ++ udc->mach = dev->platform_data; ++ ++ /* Disable irq, erase old events and disable the pull up on the bus */ ++ UDCICR0 = 0x00000000; ++ UDCICR1 = 0x00000000; ++ UDCISR0 = 0xffffffff; ++ UDCISR1 = 0xffffffff; ++ if (udc->mach->gpio_pullup) { ++ if ((retval = gpio_request(udc->mach->gpio_pullup, ++ "pca2xx_udc GPIO PULLUP"))) { ++ dev_dbg(&pdev->dev, ++ "can't get pullup gpio %d, err: %d\n", ++ udc->mach->gpio_pullup, retval); ++ if (udc->mach->gpio_vbus) ++ gpio_free(udc->mach->gpio_vbus); ++ return -EBUSY; ++ } ++ gpio_direction_output(udc->mach->gpio_pullup, 0); ++ } ++ ++ init_timer(&udc->timer); ++ udc->timer.function = udc_watchdog; ++ udc->timer.data = (unsigned long)udc; ++ ++ device_initialize(&udc->gadget.dev); ++ udc->gadget.dev.parent = dev; ++ udc->gadget.dev.dma_mask = dev->dma_mask; ++ ++ the_controller = udc; ++ dev_set_drvdata(dev, udc); ++ ++ udc_disable(udc); ++ udc_init_ep(udc); ++ udc_reinit(udc); ++ ++ /* irq setup after old hardware state is cleaned up */ ++ retval = request_irq(irq, pxa27x_udc_irq, 0, driver_name, udc); ++ if (retval != 0) { ++ printk(KERN_ERR "%s: can't get irq %i, err %d\n", ++ driver_name, irq, retval); ++ return -EBUSY; ++ } ++ udc->got_irq = 1; ++ ++ create_proc_files(); ++ ++ return 0; ++} ++ ++static void pxa27x_udc_shutdown(struct platform_device *_dev) ++{ ++ pullup_off(); ++} ++ ++static int __exit pxa27x_udc_remove(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct pxa27x_udc *udc = dev->driver_data; ++ ++ udc_disable(udc); ++ remove_proc_files(); ++ usb_gadget_unregister_driver(udc->driver); ++ ++ if (udc->got_irq) { ++ free_irq(platform_get_irq(pdev, 0), udc); ++ udc->got_irq = 0; ++ } ++ if (machine_is_lubbock() && udc->got_disc) { ++ free_irq(LUBBOCK_USB_DISC_IRQ, udc); ++ udc->got_disc = 0; ++ } ++ dev_set_drvdata(dev, 0); ++ the_controller = 0; ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int pxa27x_udc_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct device *dev = &pdev->dev; ++ struct pxa27x_udc *udc = dev->driver_data; ++ int i; ++ ++ DMSG("%s will go into SUSPEND_POWER_DOWN\n", __FUNCTION__); ++ udc->udccsr0 = UDCCSR0; ++ for (i = 1; (i < UDC_EP_NUM); i++) { ++ if (udc->ep[i].assigned) { ++ struct pxa27x_ep *ep = &udc->ep[i]; ++ ++ ep->udccsr_value = *ep->reg_udccsr; ++ ep->udccr_value = *ep->reg_udccr; ++ DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n", ++ i, *ep->reg_udccsr, *ep->reg_udccr); ++ } ++ } ++ ++ udc_clear_mask_UDCCR(UDCCR_UDE); ++ pxa_set_cken(CKEN_USB, 0); ++ ++ return 0; ++} ++ ++static int pxa27x_udc_resume(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct pxa27x_udc *udc = dev->driver_data; ++ int i; ++ ++ DMSG("%s: udc resume\n", __FUNCTION__); ++ ++ UDCCSR0 = udc->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME); ++ for (i = 1; i < UDC_EP_NUM; i++) { ++ if (udc->ep[i].assigned) { ++ struct pxa27x_ep *ep = &udc->ep[i]; ++ ++ *ep->reg_udccsr = ep->udccsr_value; ++ *ep->reg_udccr = ep->udccr_value; ++ DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n", ++ i, *ep->reg_udccsr, *ep->reg_udccr); ++ } ++ } ++ udc_enable(udc); ++ /* OTGPH bit is set when sleep mode is entered. ++ * it indicates that OTG pad is retaining its state. ++ * Upon exit from sleep mode and before clearing OTGPH, ++ * Software must configure the USB OTG pad, UDC, and UHC ++ * to the state they were in before entering sleep mode.*/ ++ PSSR |= PSSR_OTGPH; ++ ++ return 0; ++} ++#else ++#define pxa27x_udc_suspend NULL ++#define pxa27x_udc_resume NULL ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct platform_driver pxa27x_udc_driver = { ++ .shutdown = pxa27x_udc_shutdown, ++ .remove = __exit_p(pxa27x_udc_remove), ++ .suspend = pxa27x_udc_suspend, ++ .resume = pxa27x_udc_resume, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "pxa27x-udc", ++ }, ++}; ++ ++static int __init udc_init(void) ++{ ++ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); ++ return platform_driver_probe(&pxa27x_udc_driver, pxa27x_udc_probe); ++} ++ ++static void __exit udc_exit(void) ++{ ++ platform_driver_unregister(&pxa27x_udc_driver); ++} ++ ++module_init(udc_init); ++module_exit(udc_exit); ++ ++MODULE_DESCRIPTION(DRIVER_DESC); ++MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell, Rodolfo Giometti"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23/drivers/usb/gadget/pxa27x_udc.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/usb/gadget/pxa27x_udc.h 2007-10-23 12:48:34.000000000 +0200 +@@ -0,0 +1,304 @@ ++/* ++ * linux/drivers/usb/gadget/pxa27x_udc.h ++ * Intel PXA27x on-chip full speed USB device controller ++ * ++ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix ++ * Copyright (C) 2003 David Brownell ++ * Copyright (C) 2004 Intel Corporation ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef __LINUX_USB_GADGET_PXA27X_H ++#define __LINUX_USB_GADGET_PXA27X_H ++ ++#include <linux/types.h> ++ ++struct pxa27x_udc; ++ ++struct pxa27x_ep { ++ struct usb_ep ep; ++ struct pxa27x_udc *dev; ++ ++ const struct usb_endpoint_descriptor *desc; ++ struct list_head queue; ++ unsigned long pio_irqs; ++ unsigned long dma_irqs; ++ ++ int dma; ++ unsigned fifo_size; ++ unsigned ep_num; ++ unsigned ep_type; ++ ++ unsigned stopped : 1; ++ unsigned dma_con : 1; ++ unsigned dir_in : 1; ++ unsigned assigned : 1; ++ ++ unsigned config; ++ unsigned interface; ++ unsigned aisn; ++ /* UDCCSR = UDC Control/Status Register for this EP ++ * UBCR = UDC Byte Count Remaining (contents of OUT fifo) ++ * UDCDR = UDC Endpoint Data Register (the fifo) ++ * UDCCR = UDC Endpoint Configuration Registers ++ * DRCM = DMA Request Channel Map ++ */ ++ volatile u32 *reg_udccsr; ++ volatile u32 *reg_udcbcr; ++ volatile u32 *reg_udcdr; ++ volatile u32 *reg_udccr; ++#ifdef USE_DMA ++ volatile u32 *reg_drcmr; ++#define drcmr(n) .reg_drcmr = & DRCMR ## n , ++#else ++#define drcmr(n) ++#endif ++ ++#ifdef CONFIG_PM ++ unsigned udccsr_value; ++ unsigned udccr_value; ++#endif ++}; ++ ++struct pxa27x_request { ++ struct usb_request req; ++ struct list_head queue; ++}; ++ ++enum ep0_state { ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++// EP0_END_XFER, ++ EP0_STALL, ++ EP0_NO_ACTION ++}; ++ ++#define EP0_FIFO_SIZE ((unsigned)16) ++#define BULK_FIFO_SIZE ((unsigned)64) ++#define ISO_FIFO_SIZE ((unsigned)256) ++#define INT_FIFO_SIZE ((unsigned)8) ++ ++struct udc_stats { ++ struct ep0stats { ++ unsigned long ops; ++ unsigned long bytes; ++ } read, write; ++ unsigned long irqs; ++}; ++ ++#ifdef CONFIG_USB_PXA27X_SMALL ++/* when memory's tight, SMALL config saves code+data. */ ++//#undef USE_DMA ++//#define UDC_EP_NUM 3 ++#endif ++ ++#ifndef UDC_EP_NUM ++#define UDC_EP_NUM 24 ++#endif ++ ++struct pxa27x_udc { ++ struct usb_gadget gadget; ++ struct usb_gadget_driver *driver; ++ ++ enum ep0_state ep0state; ++ struct udc_stats stats; ++ unsigned got_irq : 1, ++ got_disc : 1, ++ has_cfr : 1, ++ req_pending : 1, ++ req_std : 1, ++ req_config : 1; ++ ++#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200)) ++ struct timer_list timer; ++ ++ struct device *dev; ++ struct pxa2xx_udc_mach_info *mach; ++ u64 dma_mask; ++ struct pxa27x_ep ep [UDC_EP_NUM]; ++ ++ unsigned configuration, ++ interface, ++ alternate; ++#ifdef CONFIG_PM ++ unsigned udccsr0; ++#endif ++}; ++ ++/*-------------------------------------------------------------------------*/ ++#if 0 ++#ifdef DEBUG ++#define HEX_DISPLAY(n) do { \ ++ if (machine_is_mainstone())\ ++ { MST_LEDDAT1 = (n); } \ ++ } while(0) ++ ++#define HEX_DISPLAY1(n) HEX_DISPLAY(n) ++ ++#define HEX_DISPLAY2(n) do { \ ++ if (machine_is_mainstone()) \ ++ { MST_LEDDAT2 = (n); } \ ++ } while(0) ++ ++#endif /* DEBUG */ ++#endif ++/*-------------------------------------------------------------------------*/ ++ ++/* LEDs are only for debug */ ++#ifndef HEX_DISPLAY ++#define HEX_DISPLAY(n) do {} while(0) ++#endif ++ ++#ifndef LED_CONNECTED_ON ++#define LED_CONNECTED_ON do {} while(0) ++#define LED_CONNECTED_OFF do {} while(0) ++#endif ++#ifndef LED_EP0_ON ++#define LED_EP0_ON do {} while (0) ++#define LED_EP0_OFF do {} while (0) ++#endif ++ ++static struct pxa27x_udc *the_controller; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * Debugging support vanishes in non-debug builds. DBG_NORMAL should be ++ * mostly silent during normal use/testing, with no timing side-effects. ++ */ ++#define DBG_NORMAL 1 /* error paths, device state transitions */ ++#define DBG_VERBOSE 2 /* add some success path trace info */ ++#define DBG_NOISY 3 /* ... even more: request level */ ++#define DBG_VERY_NOISY 4 /* ... even more: packet level */ ++ ++#ifdef DEBUG ++ ++static const char *state_name[] = { ++ "EP0_IDLE", ++ "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE", ++ "EP0_END_XFER", "EP0_STALL" ++}; ++ ++#define DMSG(stuff...) printk(KERN_ERR "udc: " stuff) ++ ++#ifdef VERBOSE ++# define UDC_DEBUG DBG_VERBOSE ++#else ++# define UDC_DEBUG DBG_NORMAL ++#endif ++ ++static void __attribute__ ((__unused__)) ++dump_udccr(const char *label) ++{ ++ u32 udccr = UDCCR; ++ DMSG("%s 0x%08x =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", ++ label, udccr, ++ (udccr & UDCCR_OEN) ? " oen":"", ++ (udccr & UDCCR_AALTHNP) ? " aalthnp":"", ++ (udccr & UDCCR_AHNP) ? " rem" : "", ++ (udccr & UDCCR_BHNP) ? " rstir" : "", ++ (udccr & UDCCR_DWRE) ? " dwre" : "", ++ (udccr & UDCCR_SMAC) ? " smac" : "", ++ (udccr & UDCCR_EMCE) ? " emce" : "", ++ (udccr & UDCCR_UDR) ? " udr" : "", ++ (udccr & UDCCR_UDA) ? " uda" : "", ++ (udccr & UDCCR_UDE) ? " ude" : "", ++ (udccr & UDCCR_ACN) >> UDCCR_ACN_S, ++ (udccr & UDCCR_AIN) >> UDCCR_AIN_S, ++ (udccr & UDCCR_AAISN)>> UDCCR_AAISN_S ); ++} ++ ++static void __attribute__ ((__unused__)) ++dump_udccsr0(const char *label) ++{ ++ u32 udccsr0 = UDCCSR0; ++ ++ DMSG("%s %s 0x%08x =%s%s%s%s%s%s%s\n", ++ label, state_name[the_controller->ep0state], udccsr0, ++ (udccsr0 & UDCCSR0_SA) ? " sa" : "", ++ (udccsr0 & UDCCSR0_RNE) ? " rne" : "", ++ (udccsr0 & UDCCSR0_FST) ? " fst" : "", ++ (udccsr0 & UDCCSR0_SST) ? " sst" : "", ++ (udccsr0 & UDCCSR0_DME) ? " dme" : "", ++ (udccsr0 & UDCCSR0_IPR) ? " ipr" : "", ++ (udccsr0 & UDCCSR0_OPC) ? " opr" : ""); ++} ++ ++static void __attribute__ ((__unused__)) ++dump_state(struct pxa27x_udc *dev) ++{ ++ unsigned i; ++ ++ DMSG("%s, udcicr %02X.%02X, udcsir %02X.%02x, udcfnr %02X\n", ++ state_name[dev->ep0state], ++ UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR); ++ dump_udccr("udccr"); ++ ++ if (!dev->driver) { ++ DMSG("no gadget driver bound\n"); ++ return; ++ } else ++ DMSG("ep0 driver '%s'\n", dev->driver->driver.name); ++ ++ ++ dump_udccsr0 ("udccsr0"); ++ DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n", ++ dev->stats.write.bytes, dev->stats.write.ops, ++ dev->stats.read.bytes, dev->stats.read.ops); ++ ++ for (i = 1; i < UDC_EP_NUM; i++) { ++ if (dev->ep [i].desc == 0) ++ continue; ++ DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccsr); ++ } ++} ++ ++#if 0 ++static void dump_regs(u8 ep) ++{ ++ DMSG("EP:%d UDCCSR:0x%08x UDCBCR:0x%08x\n UDCCR:0x%08x\n", ++ ep,UDCCSN(ep), UDCBCN(ep), UDCCN(ep)); ++} ++static void dump_req (struct pxa27x_request *req) ++{ ++ struct usb_request *r = &req->req; ++ ++ DMSG("%s: buf:0x%08x length:%d dma:0x%08x actual:%d\n", ++ __FUNCTION__, (unsigned)r->buf, r->length, ++ r->dma, r->actual); ++} ++#endif ++ ++#else ++ ++#define DMSG(stuff...) do{}while(0) ++ ++#define dump_udccr(x) do{}while(0) ++#define dump_udccsr0(x) do{}while(0) ++#define dump_state(x) do{}while(0) ++ ++#define UDC_DEBUG ((unsigned)0) ++ ++#endif ++ ++#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0) ++ ++#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff) ++#define INFO(stuff...) printk(KERN_INFO "udc: " stuff) ++ ++ ++#endif /* __LINUX_USB_GADGET_PXA27X_H */ +Index: linux-2.6.23/drivers/usb/gadget/serial.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/serial.c 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/serial.c 2007-10-23 12:48:34.000000000 +0200 +@@ -1378,20 +1378,20 @@ + + usb_ep_autoconfig_reset(gadget); + +- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc); ++ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc, 0, 0, 0); + if (!ep) + goto autoconf_fail; + EP_IN_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + +- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc); ++ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc, 0, 0, 0); + if (!ep) + goto autoconf_fail; + EP_OUT_NAME = ep->name; + ep->driver_data = ep; /* claim the endpoint */ + + if (use_acm) { +- ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc); ++ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc, 0, 0, 0); + if (!ep) { + printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name); + goto autoconf_fail; +Index: linux-2.6.23/drivers/usb/gadget/zero.c +=================================================================== +--- linux-2.6.23.orig/drivers/usb/gadget/zero.c 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/drivers/usb/gadget/zero.c 2007-10-23 12:48:34.000000000 +0200 +@@ -1154,7 +1154,7 @@ + * but there may also be important quirks to address. + */ + usb_ep_autoconfig_reset (gadget); +- ep = usb_ep_autoconfig (gadget, &fs_source_desc); ++ ep = usb_ep_autoconfig (gadget, &fs_source_desc, 0, 0, 0); + if (!ep) { + autoconf_fail: + printk (KERN_ERR "%s: can't autoconfigure on %s\n", +@@ -1164,7 +1164,7 @@ + EP_IN_NAME = ep->name; + ep->driver_data = ep; /* claim */ + +- ep = usb_ep_autoconfig (gadget, &fs_sink_desc); ++ ep = usb_ep_autoconfig (gadget, &fs_sink_desc, 0, 0, 0); + if (!ep) + goto autoconf_fail; + EP_OUT_NAME = ep->name; +Index: linux-2.6.23/include/asm-arm/arch-pxa/udc.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/udc.h 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/include/asm-arm/arch-pxa/udc.h 2007-10-23 12:48:34.000000000 +0200 +@@ -2,6 +2,7 @@ + * linux/include/asm-arm/arch-pxa/udc.h + * + */ ++#include <asm/arch/pxa-regs.h> + #include <asm/mach/udc_pxa2xx.h> + + extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info); +Index: linux-2.6.23/include/linux/usb_gadget.h +=================================================================== +--- linux-2.6.23.orig/include/linux/usb_gadget.h 2007-10-23 12:47:11.000000000 +0200 ++++ linux-2.6.23/include/linux/usb_gadget.h 2007-10-23 12:48:34.000000000 +0200 +@@ -397,10 +397,28 @@ + + struct usb_gadget; + ++/** ++ * struct usb_endpoint_config - possible configurations of a given endpoint ++ * @config: the configuration number ++ * @interface: the interface number ++ * @altinterface: the altinterface number ++ * ++ * Used as an array to pass information about the possible configurations ++ * of a given endpoint to the bus controller. ++ */ ++struct usb_endpoint_config { ++ int config; ++ int interface; ++ int altinterface; ++}; ++ + /* the rest of the api to the controller hardware: device operations, + * which don't involve endpoints (or i/o). + */ + struct usb_gadget_ops { ++ struct usb_ep* (*ep_alloc)(struct usb_gadget *gadget, ++ struct usb_endpoint_descriptor *desc, ++ int config, int interface, int alt); + int (*get_frame)(struct usb_gadget *); + int (*wakeup)(struct usb_gadget *); + int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); +@@ -824,7 +842,8 @@ + /* utility wrapping a simple endpoint selection policy */ + + extern struct usb_ep *usb_ep_autoconfig (struct usb_gadget *, +- struct usb_endpoint_descriptor *) __devinit; ++ struct usb_endpoint_descriptor *, ++ int, int, int) __devinit; + + extern void usb_ep_autoconfig_reset (struct usb_gadget *) __devinit; + diff --git a/packages/linux/linux-ezx-2.6.23/patches/pxa27x_overlay-r7.patch b/packages/linux/linux-ezx-2.6.23/patches/pxa27x_overlay-r7.patch new file mode 100644 index 0000000000..7eca9301ac --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/pxa27x_overlay-r7.patch @@ -0,0 +1,2436 @@ + drivers/video/Kconfig | 18 + drivers/video/Makefile | 1 + drivers/video/pxafb.c | 305 +++++-- + drivers/video/pxafb.h | 65 + + drivers/video/pxafb_overlay.c | 1525 ++++++++++++++++++++++++++++++++++++ + include/asm-arm/arch-pxa/pxa-regs.h | 111 ++ + 6 files changed, 1969 insertions(+), 56 deletions(-) + +Index: linux-2.6.23/drivers/video/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/video/Kconfig 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/drivers/video/Kconfig 2007-10-22 21:53:54.000000000 +0200 +@@ -1682,6 +1682,24 @@ + + If unsure, say N. + ++choice ++ prompt "PXA LCD type" ++ depends on FB_PXA ++ ++config FB_PXA_LCD_QVGA ++ bool "QVGA(320x240)" ++ ++config FB_PXA_LCD_VGA ++ bool "VGA (640x480)" ++ ++endchoice ++ ++config FB_PXA_OVERLAY ++ tristate "PXA LCD overlay support" ++ depends on FB_PXA ++ ---help--- ++ Frame buffer overlay driver for PXA27x ++ + config FB_PXA_PARAMETERS + bool "PXA LCD command line parameters" + default n +Index: linux-2.6.23/drivers/video/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/video/Makefile 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/drivers/video/Makefile 2007-10-22 21:53:54.000000000 +0200 +@@ -96,6 +96,7 @@ + obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o + obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o + obj-$(CONFIG_FB_PXA) += pxafb.o ++obj-$(CONFIG_FB_PXA_OVERLAY) += pxafb_overlay.o + obj-$(CONFIG_FB_W100) += w100fb.o + obj-$(CONFIG_FB_AU1100) += au1100fb.o + obj-$(CONFIG_FB_AU1200) += au1200fb.o +Index: linux-2.6.23/drivers/video/pxafb.c +=================================================================== +--- linux-2.6.23.orig/drivers/video/pxafb.c 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/drivers/video/pxafb.c 2007-10-22 22:01:00.000000000 +0200 +@@ -58,17 +58,49 @@ + #define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB) + #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP) + ++wait_queue_head_t fcs_wait_eof; ++int fcs_in_eof; ++static DECLARE_MUTEX(fcs_lcd_sem); ++ + static void (*pxafb_backlight_power)(int); + static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); + + static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *); +-static void set_ctrlr_state(struct pxafb_info *fbi, u_int state); ++void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state); + + #ifdef CONFIG_FB_PXA_PARAMETERS + #define PXAFB_OPTIONS_SIZE 256 + static char g_options[PXAFB_OPTIONS_SIZE] __devinitdata = ""; + #endif + ++static struct pxafb_rgb def_rgb_8 = { ++ red: { offset: 0, length: 8, }, ++ green: { offset: 0, length: 8, }, ++ blue: { offset: 0, length: 8, }, ++ transp: { offset: 0, length: 0, }, ++}; ++ ++static struct pxafb_rgb def_rgb_16 = { ++ red: { offset: 11, length: 5, }, ++ green: { offset: 5, length: 6, }, ++ blue: { offset: 0, length: 5, }, ++ transp: { offset: 0, length: 0, }, ++}; ++ ++static struct pxafb_rgb def_rgb_18 = { ++ red: { offset: 12, length: 6, }, ++ green: { offset: 6, length: 6, }, ++ blue: { offset: 0, length: 6, }, ++ transp: { offset: 0, length: 0, }, ++}; ++ ++static struct pxafb_rgb def_rgb_24 = { ++ red: { offset: 16, length: 8, }, ++ green: { offset: 8, length: 8, }, ++ blue: { offset: 0, length: 8, }, ++ transp: { offset: 0, length: 0, }, ++}; ++ + static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state) + { + unsigned long flags; +@@ -190,6 +222,10 @@ + case 4: ret = LCCR3_4BPP; break; + case 8: ret = LCCR3_8BPP; break; + case 16: ret = LCCR3_16BPP; break; ++ case 18: ret = LCCR3_18BPP; break; ++ case 19: ret = LCCR3_19BPP; break; ++ case 24: ret = LCCR3_24BPP; break; ++ case 25: ret = LCCR3_25BPP; break; + } + return ret; + } +@@ -301,18 +337,34 @@ + * The pixel packing format is described on page 7-11 of the + * PXA2XX Developer's Manual. + */ +- if (var->bits_per_pixel == 16) { +- var->red.offset = 11; var->red.length = 5; +- var->green.offset = 5; var->green.length = 6; +- var->blue.offset = 0; var->blue.length = 5; +- var->transp.offset = var->transp.length = 0; +- } else { +- var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0; +- var->red.length = 8; +- var->green.length = 8; +- var->blue.length = 8; +- var->transp.length = 0; +- } ++ switch (var->bits_per_pixel) { ++ case 16: ++ /* 2 pixels per line */ ++ var->red = def_rgb_16.red; ++ var->green = def_rgb_16.green; ++ var->blue = def_rgb_16.blue; ++ var->transp = def_rgb_16.transp; ++ break; ++ case 18: ++ case 19: ++ var->red = def_rgb_18.red; ++ var->green = def_rgb_18.green; ++ var->blue = def_rgb_18.blue; ++ var->transp = def_rgb_18.transp; ++ break; ++ case 24: ++ case 25: ++ var->red = def_rgb_24.red; ++ var->green = def_rgb_24.green; ++ var->blue = def_rgb_24.blue; ++ var->transp = def_rgb_24.transp; ++ break; ++ default: ++ var->red = def_rgb_8.red; ++ var->green = def_rgb_8.green; ++ var->blue = def_rgb_8.blue; ++ var->transp = def_rgb_8.transp; ++ } + + #ifdef CONFIG_CPU_FREQ + pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n", +@@ -326,7 +378,7 @@ + static inline void pxafb_set_truecolor(u_int is_true_color) + { + pr_debug("pxafb: true_color = %d\n", is_true_color); +- // do your machine-specific setup if needed ++ /* do your machine-specific setup if needed */ + } + + /* +@@ -341,7 +393,8 @@ + + pr_debug("pxafb: set_par\n"); + +- if (var->bits_per_pixel == 16) ++ if (var->bits_per_pixel == 16 || var->bits_per_pixel == 18 ||var->bits_per_pixel == 19 ++ || var->bits_per_pixel == 24 || var->bits_per_pixel == 25) + fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; + else if (!fbi->cmap_static) + fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; +@@ -354,12 +407,25 @@ + fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; + } + +- fbi->fb.fix.line_length = var->xres_virtual * +- var->bits_per_pixel / 8; +- if (var->bits_per_pixel == 16) +- fbi->palette_size = 0; +- else +- fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel; ++ switch (var->bits_per_pixel) { ++ case 16: ++ fbi->fb.fix.line_length = var->xres_virtual * 2; ++ fbi->palette_size = 0; ++ break; ++ case 18: ++ case 19: ++ fbi->fb.fix.line_length = var->xres_virtual * 3; ++ fbi->palette_size = 0; ++ break; ++ case 24: ++ case 25: ++ fbi->fb.fix.line_length = var->xres_virtual * 4; ++ fbi->palette_size = 0; ++ break; ++ default: ++ fbi->fb.fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; ++ fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel; ++ } + + palette_mem_size = fbi->palette_size * sizeof(u16); + +@@ -373,7 +439,8 @@ + */ + pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR); + +- if (fbi->fb.var.bits_per_pixel == 16) ++ if (fbi->fb.var.bits_per_pixel == 16 || fbi->fb.var.bits_per_pixel == 18 ||fbi->fb.var.bits_per_pixel == 19 ++ || fbi->fb.var.bits_per_pixel == 24 || fbi->fb.var.bits_per_pixel == 25) + fb_dealloc_cmap(&fbi->fb.cmap); + else + fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0); +@@ -419,7 +486,7 @@ + * 16 bpp mode does not really use the palette, so this will not + * blank the display in all modes. + */ +-static int pxafb_blank(int blank, struct fb_info *info) ++int pxafb_blank(int blank, struct fb_info *info) + { + struct pxafb_info *fbi = (struct pxafb_info *)info; + int i; +@@ -436,19 +503,20 @@ + for (i = 0; i < fbi->palette_size; i++) + pxafb_setpalettereg(i, 0, 0, 0, 0, info); + +- pxafb_schedule_work(fbi, C_DISABLE); +- //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); ++ pxafb_schedule_work(fbi, C_BLANK); ++ /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */ + break; + + case FB_BLANK_UNBLANK: +- //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); ++ /* TODO if (pxafb_blank_helper) pxafb_blank_helper(blank); */ + if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR || + fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR) + fb_set_cmap(&fbi->fb.cmap, info); +- pxafb_schedule_work(fbi, C_ENABLE); ++ pxafb_schedule_work(fbi, C_UNBLANK); + } + return 0; + } ++EXPORT_SYMBOL(pxafb_blank); + + static int pxafb_mmap(struct fb_info *info, + struct vm_area_struct *vma) +@@ -582,6 +650,10 @@ + case 4: + case 8: + case 16: ++ case 18: ++ case 19: ++ case 24: ++ case 25: + break; + default: + printk(KERN_ERR "%s: invalid bit depth %d\n", +@@ -613,7 +685,10 @@ + + new_regs.lccr0 = fbi->lccr0 | + (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | +- LCCR0_QDM | LCCR0_BM | LCCR0_OUM); ++#ifdef CONFIG_PXA27x /* Enable overlay for PXA27x */ ++ LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM | ++#endif ++ LCCR0_QDM | LCCR0_BM | LCCR0_OUM); + + new_regs.lccr1 = + LCCR1_DisWdth(var->xres) + +@@ -672,13 +747,14 @@ + + fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma; + fbi->dmadesc_fbhigh_cpu->fidr = 0; +- fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL; ++ fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL | LDCMD_EOFINT; + + fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma; + fbi->dmadesc_palette_cpu->fidr = 0; + fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL; + +- if (var->bits_per_pixel == 16) { ++ if (var->bits_per_pixel == 16 || var->bits_per_pixel == 18 ||var->bits_per_pixel == 19 ++ || var->bits_per_pixel == 24 || var->bits_per_pixel == 25) { + /* palette shouldn't be loaded in true-color mode */ + fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma; + fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */ +@@ -731,8 +807,8 @@ + } + + /* +- * NOTE! The following functions are purely helpers for set_ctrlr_state. +- * Do not call them directly; set_ctrlr_state does the correct serialisation ++ * NOTE! The following functions are purely helpers for pxafb_set_ctrlr_state. ++ * Do not call them directly; pxafb_set_ctrlr_state does the correct serialisation + * to ensure that things happen in the right way 100% of time time. + * -- rmk + */ +@@ -754,7 +830,8 @@ + + static void pxafb_setup_gpio(struct pxafb_info *fbi) + { +- int gpio, ldd_bits; ++ int gpio; ++ int ldd_bits = 0; + unsigned int lccr0 = fbi->lccr0; + + /* +@@ -764,28 +841,56 @@ + /* 4 bit interface */ + if ((lccr0 & LCCR0_CMS) == LCCR0_Mono && + (lccr0 & LCCR0_SDS) == LCCR0_Sngl && +- (lccr0 & LCCR0_DPD) == LCCR0_4PixMono) ++ (lccr0 & LCCR0_DPD) == LCCR0_4PixMono) { + ldd_bits = 4; +- ++ } + /* 8 bit interface */ + else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono && + ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) || + ((lccr0 & LCCR0_CMS) == LCCR0_Color && +- (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl)) ++ (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl)) { + ldd_bits = 8; +- ++ } + /* 16 bit interface */ +- else if ((lccr0 & LCCR0_CMS) == LCCR0_Color && +- ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act)) +- ldd_bits = 16; ++ else if ((lccr0 & LCCR0_CMS) == LCCR0_Color && ++ ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act)) { ++ switch (fbi->fb.var.bits_per_pixel) { ++ case 16: ++#ifdef CONFIG_PXA27x ++ /* bits 58-77 */ ++ GPDR1 |= (0x3f << 26); ++ GPDR2 |= 0x00003fff; + ++ GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); ++ GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa; ++#endif ++ ldd_bits = 16; ++ break; ++ case 18: ++ case 19: ++ case 24: ++ case 25: ++#ifdef CONFIG_PXA27x ++ /* bits 58-77 and 86, 87 */ ++ GPDR1 |= (0x3f << 26); ++ GPDR2 |= 0x00c03fff; ++ ++ GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20); ++ GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa; ++ GAFR2_U = (GAFR2_U & 0xffff0fff) | 0xa000; ++#endif ++ ldd_bits = 25; ++ break; ++ } ++ } + else { + printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n"); + return; + } + +- for (gpio = 58; ldd_bits; gpio++, ldd_bits--) ++ for (gpio = 58; ldd_bits > 0; gpio++, ldd_bits--) { + pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT); ++ } + pxa_gpio_mode(GPIO74_LCD_FCLK_MD); + pxa_gpio_mode(GPIO75_LCD_LCLK_MD); + pxa_gpio_mode(GPIO76_LCD_PCLK_MD); +@@ -805,6 +910,7 @@ + /* enable LCD controller clock */ + pxa_set_cken(CKEN_LCD, 1); + ++ down(&fcs_lcd_sem); + /* Sequence from 11.7.10 */ + LCCR3 = fbi->reg_lccr3; + LCCR2 = fbi->reg_lccr2; +@@ -815,6 +921,8 @@ + FDADR1 = fbi->fdadr1; + LCCR0 |= LCCR0_ENB; + ++ up(&fcs_lcd_sem); ++ + pr_debug("FDADR0 0x%08x\n", (unsigned int) FDADR0); + pr_debug("FDADR1 0x%08x\n", (unsigned int) FDADR1); + pr_debug("LCCR0 0x%08x\n", (unsigned int) LCCR0); +@@ -829,6 +937,7 @@ + + pr_debug("pxafb: disabling LCD controller\n"); + ++ down(&fcs_lcd_sem); + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&fbi->ctrlr_wait, &wait); + +@@ -838,6 +947,7 @@ + + schedule_timeout(200 * HZ / 1000); + remove_wait_queue(&fbi->ctrlr_wait, &wait); ++ up(&fcs_lcd_sem); + + /* disable LCD controller clock */ + pxa_set_cken(CKEN_LCD, 0); +@@ -855,6 +965,11 @@ + LCCR0 |= LCCR0_LDM; + wake_up(&fbi->ctrlr_wait); + } ++ if (lcsr & LCSR_EOF && fcs_in_eof) { ++ LCCR0 |= LCCR0_EFM; ++ fcs_in_eof = 0; ++ wake_up(&fcs_wait_eof); ++ } + + LCSR = lcsr; + return IRQ_HANDLED; +@@ -865,7 +980,7 @@ + * sleep when disabling the LCD controller, or if we get two contending + * processes trying to alter state. + */ +-static void set_ctrlr_state(struct pxafb_info *fbi, u_int state) ++void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state) + { + u_int old_state; + +@@ -887,7 +1002,9 @@ + */ + if (old_state != C_DISABLE && old_state != C_DISABLE_PM) { + fbi->state = state; +- //TODO __pxafb_lcd_power(fbi, 0); ++ /* TODO __pxafb_lcd_power(fbi, 0); */ ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_DISABLE); + pxafb_disable_controller(fbi); + } + break; +@@ -901,6 +1018,8 @@ + fbi->state = state; + __pxafb_backlight_power(fbi, 0); + __pxafb_lcd_power(fbi, 0); ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_DISABLE); + if (old_state != C_DISABLE_CLKCHANGE) + pxafb_disable_controller(fbi); + } +@@ -914,7 +1033,9 @@ + if (old_state == C_DISABLE_CLKCHANGE) { + fbi->state = C_ENABLE; + pxafb_enable_controller(fbi); +- //TODO __pxafb_lcd_power(fbi, 1); ++ /* TODO __pxafb_lcd_power(fbi, 1); */ ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_ENABLE); + } + break; + +@@ -926,9 +1047,13 @@ + */ + if (old_state == C_ENABLE) { + __pxafb_lcd_power(fbi, 0); ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_DISABLE); + pxafb_disable_controller(fbi); + pxafb_setup_gpio(fbi); + pxafb_enable_controller(fbi); ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_ENABLE); + __pxafb_lcd_power(fbi, 1); + } + break; +@@ -954,11 +1079,46 @@ + pxafb_enable_controller(fbi); + __pxafb_lcd_power(fbi, 1); + __pxafb_backlight_power(fbi, 1); ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_ENABLE); + } + break; ++ ++ case C_BLANK: ++ /* ++ * Disable controller, blank overlays if exist. ++ */ ++ if ((old_state != C_DISABLE) && (old_state != C_BLANK)) { ++ fbi->state = state; ++ __pxafb_backlight_power(fbi, 0); ++ __pxafb_lcd_power(fbi, 0); ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_BLANK); ++ if (old_state != C_DISABLE_CLKCHANGE) ++ pxafb_disable_controller(fbi); ++ } ++ break; ++ ++ case C_UNBLANK: ++ /* ++ * Power up the LCD screen, enable controller, and ++ * turn on the backlight, unblank overlays if exist. ++ */ ++ if ((old_state != C_ENABLE) && (old_state != C_UNBLANK)) { ++ fbi->state = C_UNBLANK; ++ pxafb_setup_gpio(fbi); ++ pxafb_enable_controller(fbi); ++ __pxafb_lcd_power(fbi, 1); ++ __pxafb_backlight_power(fbi, 1); ++ if(fbi->set_overlay_ctrlr_state) ++ fbi->set_overlay_ctrlr_state(fbi, C_UNBLANK); ++ } ++ break; ++ + } + up(&fbi->ctrlr_sem); + } ++EXPORT_SYMBOL(pxafb_set_ctrlr_state); + + /* + * Our LCD controller task (which is called when we blank or unblank) +@@ -970,7 +1130,7 @@ + container_of(work, struct pxafb_info, task); + u_int state = xchg(&fbi->task_state, -1); + +- set_ctrlr_state(fbi, state); ++ pxafb_set_ctrlr_state(fbi, state); + } + + #ifdef CONFIG_CPU_FREQ +@@ -985,19 +1145,29 @@ + pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data) + { + struct pxafb_info *fbi = TO_INF(nb, freq_transition); +- //TODO struct cpufreq_freqs *f = data; ++ /* TODO struct cpufreq_freqs *f = data; */ ++ struct cpufreq_freqs *clkinfo; + u_int pcd; ++ u_int lccr3; + + switch (val) { + case CPUFREQ_PRECHANGE: +- set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); ++ pxafb_set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE); + break; + + case CPUFREQ_POSTCHANGE: ++ clkinfo = (struct cpufreq_freqs *)data; ++ /* If leaving a 13kHz state with the LCD sustained */ ++ if ((clkinfo->old == 13000)) ++ break; ++ + pcd = get_pcd(fbi->fb.var.pixclock); ++ lccr3 = fbi->reg_lccr3; + set_hsync_time(fbi, pcd); + fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd); +- set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); ++ pxafb_set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE); ++ if (lccr3 != fbi->reg_lccr3 && !((LCCR0 & LCCR0_DIS) || !(LCCR0 & LCCR0_ENB))) ++ LCCR3 = fbi->reg_lccr3; + break; + } + return 0; +@@ -1016,7 +1186,7 @@ + printk(KERN_DEBUG "min dma period: %d ps, " + "new clock %d kHz\n", pxafb_display_dma_period(var), + policy->max); +- // TODO: fill in min/max values ++ /* TODO: fill in min/max values */ + break; + #if 0 + case CPUFREQ_NOTIFY: +@@ -1042,7 +1212,7 @@ + { + struct pxafb_info *fbi = platform_get_drvdata(dev); + +- set_ctrlr_state(fbi, C_DISABLE_PM); ++ pxafb_set_ctrlr_state(fbi, C_DISABLE_PM); + return 0; + } + +@@ -1050,7 +1220,11 @@ + { + struct pxafb_info *fbi = platform_get_drvdata(dev); + +- set_ctrlr_state(fbi, C_ENABLE_PM); ++ pxafb_set_ctrlr_state(fbi, C_ENABLE_PM); ++//RP#ifdef CONFIG_PXA27x ++//RP LCCR4 |= (1 << 31); /* Disable the PCD Divisor, PCDDIV */ ++//RP LCCR4 |= (5 << 17); /* Undocumented feature */ ++//RP#endif + return 0; + } + #else +@@ -1154,11 +1328,21 @@ + fbi->task_state = (u_char)-1; + + for (i = 0; i < inf->num_modes; i++) { +- smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8; ++ if (mode[i].bpp <= 16) { /* 8, 16 bpp */ ++ smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8; ++ } else if ( mode[i].bpp > 19 ) { /* 24, 25 bpp */ ++ smemlen = mode[i].xres * mode[i].yres * 4; ++ } else { /* 18, 19 bpp */ ++ /* packed format */ ++ smemlen = mode[i].xres * mode[i].yres * 3; ++ } ++ + if (smemlen > fbi->fb.fix.smem_len) + fbi->fb.fix.smem_len = smemlen; + } + ++ fbi->set_overlay_ctrlr_state = NULL; ++ + init_waitqueue_head(&fbi->ctrlr_wait); + INIT_WORK(&fbi->task, pxafb_task); + init_MUTEX(&fbi->ctrlr_sem); +@@ -1225,6 +1409,10 @@ + case 4: + case 8: + case 16: ++ case 18: ++ case 19: ++ case 24: ++ case 25: + inf->modes[0].bpp = bpp; + dev_info(dev, "overriding bit depth: %d\n", bpp); + break; +@@ -1373,7 +1561,7 @@ + fbi = pxafb_init_fbinfo(&dev->dev); + if (!fbi) { + dev_err(&dev->dev, "Failed to initialize framebuffer device\n"); +- ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc ++ ret = -ENOMEM; /* only reason for pxafb_init_fbinfo to fail is kmalloc */ + goto failed; + } + +@@ -1408,7 +1596,7 @@ + } + + #ifdef CONFIG_PM +- // TODO ++ /* TODO */ + #endif + + #ifdef CONFIG_CPU_FREQ +@@ -1421,7 +1609,12 @@ + /* + * Ok, now enable the LCD controller + */ +- set_ctrlr_state(fbi, C_ENABLE); ++ pxafb_set_ctrlr_state(fbi, C_ENABLE); ++//#ifdef CONFIG_PXA27x ++// LCCR4 |= (1 << 31); /* Disabel the PCD Divisor, PCDDIV */ ++// LCCR4 |= (5 << 17); /* Undocumented feature */ ++//#endif ++ init_waitqueue_head(&fcs_wait_eof); + + return 0; + +Index: linux-2.6.23/drivers/video/pxafb.h +=================================================================== +--- linux-2.6.23.orig/drivers/video/pxafb.h 2007-10-09 22:31:38.000000000 +0200 ++++ linux-2.6.23/drivers/video/pxafb.h 2007-10-22 21:53:54.000000000 +0200 +@@ -29,6 +29,60 @@ + unsigned int lccr3; + }; + ++struct pxafb_rgb { ++ struct fb_bitfield red; ++ struct fb_bitfield green; ++ struct fb_bitfield blue; ++ struct fb_bitfield transp; ++}; ++ ++#ifdef CONFIG_PXA27x ++/* PXA Overlay Framebuffer Support */ ++struct overlayfb_info ++{ ++ struct fb_info fb; ++ ++ struct fb_var_screeninfo old_var; ++ ++ struct semaphore mutex; ++ unsigned long refcount; ++ ++ struct pxafb_info *basefb; ++ ++ unsigned long map_cpu; ++ unsigned long screen_cpu; ++ unsigned long palette_cpu; ++ unsigned long map_size; ++ unsigned long palette_size; ++ ++ dma_addr_t screen_dma; ++ dma_addr_t map_dma; ++ dma_addr_t palette_dma; ++ ++ volatile u_char state; ++ ++ /* overlay specific info */ ++ unsigned long xpos; /* screen position (x, y)*/ ++ unsigned long ypos; ++ unsigned long format; ++ ++ /* additional */ ++ union { ++ struct pxafb_dma_descriptor *dma0; ++ struct pxafb_dma_descriptor *dma1; ++ struct { ++ struct pxafb_dma_descriptor *dma2; ++ struct pxafb_dma_descriptor *dma3; ++ struct pxafb_dma_descriptor *dma4; ++ }; ++ struct { ++ struct pxafb_dma_descriptor *dma5_pal; ++ struct pxafb_dma_descriptor *dma5_frame; ++ }; ++ }; ++}; ++#endif ++ + /* PXA LCD DMA descriptor */ + struct pxafb_dma_descriptor { + unsigned int fdadr; +@@ -87,6 +141,14 @@ + wait_queue_head_t ctrlr_wait; + struct work_struct task; + ++#ifdef CONFIG_PXA27x ++ /* PXA Overlay Framebuffer Support */ ++ struct overlayfb_info *overlay1fb; ++ struct overlayfb_info *overlay2fb; ++ struct overlayfb_info *cursorfb; ++#endif ++ void (*set_overlay_ctrlr_state)(struct pxafb_info *, u_int); ++ + #ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; + struct notifier_block freq_policy; +@@ -106,6 +168,9 @@ + #define C_DISABLE_PM (5) + #define C_ENABLE_PM (6) + #define C_STARTUP (7) ++#define C_BLANK (8) ++#define C_UNBLANK (9) ++ + + #define PXA_NAME "PXA" + +Index: linux-2.6.23/drivers/video/pxafb_overlay.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/video/pxafb_overlay.c 2007-10-22 21:53:54.000000000 +0200 +@@ -0,0 +1,1525 @@ ++/* ++ * linux/drivers/video/pxafb_overlay.c ++ * ++ * Copyright (c) 2004, Intel Corporation ++ * ++ * Code Status: ++ * 2004/10/28: <yan.yin@intel.com> ++ * - Ported to 2.6 kernel ++ * - Made overlay driver a loadable module ++ * - Merged overlay optimized patch ++ * 2004/03/10: <stanley.cai@intel.com> ++ * - Fixed Bugs ++ * - Added workaround for overlay1&2 ++ * 2003/08/27: <yu.tang@intel.com> ++ * - Added Overlay 1 & Overlay2 & Hardware Cursor support ++ * ++ * ++ * This software program is licensed subject to the GNU Lesser General ++ * Public License (LGPL). Version 2.1, February 1999, available at ++ * http://www.gnu.org/copyleft/lesser.html ++ * ++ * Intel PXA27x LCD Controller Frame Buffer Overlay Driver ++ * ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/errno.h> ++#include <linux/string.h> ++#include <linux/interrupt.h> ++#include <linux/slab.h> ++#include <linux/fb.h> ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/ioport.h> ++#include <linux/cpufreq.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/dma-mapping.h> ++ ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/uaccess.h> ++#include <asm/arch/bitfield.h> ++#include <asm/arch/pxafb.h> ++#include <asm/arch/pxa-regs.h> ++ ++#include "pxafb.h" ++ ++/* LCD enhancement : Overlay 1 & 2 & Hardware Cursor */ ++ ++/* ++ * LCD enhancement : Overlay 1 ++ * ++ * Features: ++ * - support 16bpp (No palette) ++ */ ++/* ++ * debugging? ++ */ ++#define DEBUG 0 ++ ++#ifdef DEBUG ++#define dbg(fmt,arg...) printk(KERN_ALERT "%s(): " fmt "\n", __FUNCTION__, ##arg) ++#else ++#define dbg(fmt,arg...) ++#endif ++ ++static int overlay1fb_enable(struct fb_info *info); ++static int overlay2fb_enable(struct fb_info *info); ++static int cursorfb_enable(struct fb_info *info); ++ ++static int overlay1fb_disable(struct fb_info *info); ++static int overlay2fb_disable(struct fb_info *info); ++static int cursorfb_disable(struct fb_info *info); ++ ++static int overlay1fb_blank(int blank, struct fb_info *info); ++static int overlay2fb_blank(int blank, struct fb_info *info); ++static int cursorfb_blank(int blank, struct fb_info *info); ++ ++extern void pxafb_set_ctrlr_state(struct pxafb_info *fbi, u_int state); ++extern int pxafb_blank(int blank, struct fb_info *info); ++ ++static struct pxafb_rgb def_rgb_18 = { ++ red: { offset: 12, length: 6, }, ++ green: { offset: 6, length: 6, }, ++ blue: { offset: 0, length: 6, }, ++ transp: { offset: 0, length: 0, }, ++}; ++ ++static struct pxafb_rgb def_rgbt_16 = { ++ red: { offset: 10, length: 5, }, ++ green: { offset: 5, length: 5, }, ++ blue: { offset: 0, length: 5, }, ++ transp: { offset: 15, length: 1, }, ++}; ++ ++static struct pxafb_rgb def_rgbt_19 = { ++ red: { offset: 12, length: 6, }, ++ green: { offset: 6, length: 6, }, ++ blue: { offset: 0, length: 6, }, ++ transp: { offset: 18, length: 1, }, ++}; ++ ++static struct pxafb_rgb def_rgbt_24 = { ++ red: { offset: 16, length: 7, }, ++ green: { offset: 8, length: 8, }, ++ blue: { offset: 0, length: 8, }, ++ transp: { offset: 0, length: 0, }, ++}; ++ ++static struct pxafb_rgb def_rgbt_25 = { ++ red: { offset: 16, length: 8, }, ++ green: { offset: 8, length: 8, }, ++ blue: { offset: 0, length: 8, }, ++ transp: { offset: 24, length: 1, }, ++}; ++ ++#define CLEAR_LCD_INTR(reg, intr) do { \ ++ reg = (intr); \ ++}while(0) ++ ++#define WAIT_FOR_LCD_INTR(reg,intr,timeout) ({ \ ++ int __done =0; \ ++ int __t = timeout; \ ++ while (__t) { \ ++ __done = (reg) & (intr); \ ++ if (__done) break; \ ++ mdelay(10); \ ++ __t--; \ ++ } \ ++ if (!__t) dbg("wait " #intr " timeount");\ ++ __done; \ ++}) ++ ++#define DISABLE_OVERLAYS(fbi) do { \ ++ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_ENABLE)) { \ ++ overlay1fb_disable((struct fb_info*)fbi->overlay1fb); \ ++ } \ ++ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_ENABLE)) { \ ++ overlay2fb_disable((struct fb_info*)fbi->overlay2fb); \ ++ } \ ++ if (fbi->cursorfb && (fbi->cursorfb->state == C_ENABLE)) { \ ++ cursorfb_disable((struct fb_info*)fbi->cursorfb); \ ++ } \ ++}while(0) ++ ++#define ENABLE_OVERLAYS(fbi) do { \ ++ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_DISABLE)) { \ ++ overlay1fb_enable((struct fb_info*)fbi->overlay1fb); \ ++ } \ ++ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_DISABLE)) { \ ++ overlay2fb_enable((struct fb_info*)fbi->overlay2fb); \ ++ } \ ++ if (fbi->cursorfb && (fbi->cursorfb->state == C_DISABLE)) { \ ++ cursorfb_enable((struct fb_info*)fbi->cursorfb); \ ++ } \ ++}while(0) ++ ++#define BLANK_OVERLAYS(fbi) do { \ ++ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_ENABLE)) { \ ++ overlay1fb_disable((struct fb_info*)fbi->overlay1fb); \ ++ fbi->overlay1fb->state = C_BLANK; \ ++ } \ ++ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_ENABLE)) { \ ++ overlay2fb_disable((struct fb_info*)fbi->overlay2fb); \ ++ fbi->overlay2fb->state = C_BLANK; \ ++ } \ ++ if (fbi->cursorfb && (fbi->cursorfb->state == C_ENABLE)) { \ ++ cursorfb_disable((struct fb_info*)fbi->cursorfb); \ ++ fbi->cursorfb->state = C_BLANK; \ ++ } \ ++}while(0) ++ ++#define UNBLANK_OVERLAYS(fbi) do { \ ++ if (fbi->overlay1fb && (fbi->overlay1fb->state == C_BLANK)) { \ ++ overlay1fb_enable((struct fb_info*)fbi->overlay1fb); \ ++ fbi->overlay1fb->state = C_ENABLE; \ ++ } \ ++ if (fbi->overlay2fb && (fbi->overlay2fb->state == C_BLANK)) { \ ++ overlay2fb_enable((struct fb_info*)fbi->overlay2fb); \ ++ fbi->overlay2fb->state = C_ENABLE; \ ++ } \ ++ if (fbi->cursorfb && (fbi->cursorfb->state == C_BLANK)) { \ ++ cursorfb_enable((struct fb_info*)fbi->cursorfb); \ ++ fbi->cursorfb->state = C_ENABLE; \ ++ } \ ++}while(0) ++ ++static int overlay1fb_open(struct fb_info *info, int user) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ int ret = 0; ++ ++/* If basefb is disable, enable fb. */ ++ if (fbi->basefb && fbi->basefb->state != C_ENABLE) ++ pxafb_blank(VESA_NO_BLANKING, (struct fb_info *)(fbi->basefb)); ++ ++ down(&fbi->mutex); ++ ++ if (fbi->refcount) ++ ret = -EACCES; ++ else ++ fbi->refcount ++; ++ ++ up(&fbi->mutex); ++ ++ /* Initialize the variables in overlay1 framebuffer. */ ++ fbi->fb.var.xres = fbi->fb.var.yres = 0; ++ fbi->fb.var.bits_per_pixel = 0; ++ ++ return ret; ++} ++ ++static int overlay1fb_release(struct fb_info *info, int user) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ down(&fbi->mutex); ++ ++ if (fbi->refcount) ++ fbi->refcount --; ++ ++ up(&fbi->mutex); ++ /* disable overlay when released */ ++ overlay1fb_blank(1, info); ++ ++ return 0; ++} ++ ++static int overlay1fb_map_video_memory(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ ++ if (fbi->map_cpu) ++ dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma); ++ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); ++ ++ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, ++ &fbi->map_dma, GFP_KERNEL ); ++ ++ if (!fbi->map_cpu) return -ENOMEM; ++ ++ fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE; ++ fbi->screen_dma = fbi->map_dma + PAGE_SIZE; ++ ++ fbi->fb.fix.smem_start = fbi->screen_dma; ++ ++ /* setup dma descriptor */ ++ fbi->dma1 = (struct pxafb_dma_descriptor*) ++ (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor)); ++ ++ fbi->dma1->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor)); ++ fbi->dma1->fsadr = fbi->screen_dma; ++ fbi->dma1->fidr = 0; ++ fbi->dma1->ldcmd = fbi->fb.fix.smem_len; ++ ++ return 0; ++} ++ ++static int overlay1fb_enable(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ unsigned long bpp1; ++ ++ if (!fbi->map_cpu) return -EINVAL; ++ ++ switch (fbi->fb.var.bits_per_pixel) { ++ case 16: ++ bpp1 = 0x4; ++ break; ++ case 18: ++ bpp1 = 0x6; ++ break; ++ case 19: ++ bpp1 = 0x8; ++ break; ++ case 24: ++ bpp1 = 0x9; ++ break; ++ case 25: ++ bpp1 = 0xa; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ /* disable branch/start/end of frame interrupt */ ++ LCCR5 |= (LCCR5_IUM1 | LCCR5_BSM1 | LCCR5_EOFM1 | LCCR5_SOFM1); ++ ++ if (fbi->state == C_DISABLE || fbi->state == C_BLANK) ++ FDADR1 = (fbi->dma1->fdadr); ++ else ++ FBR1 = fbi->dma1->fdadr | 0x1; ++ ++ /* enable overlay 1 window */ ++ OVL1C2 = (fbi->ypos << 10) | fbi->xpos; ++ OVL1C1 = OVL1C1_O1EN | (bpp1 << 20) | ((fbi->fb.var.yres-1)<<10) | (fbi->fb.var.xres-1); ++ ++ fbi->state = C_ENABLE; ++ ++ return 0; ++} ++ ++static int overlay1fb_disable(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*)info; ++ int done; ++ ++ if ((fbi->state == C_DISABLE) || (fbi->state == C_BLANK)) ++ return 0; ++ ++ fbi->state = C_DISABLE; ++ ++ /* clear O1EN */ ++ OVL1C1 &= ~OVL1C1_O1EN; ++ ++ CLEAR_LCD_INTR(LCSR1, LCSR1_BS1); ++ FBR1 = 0x3; ++ done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS1, 100); ++ ++ if (!done) { ++ pr_debug(KERN_INFO "%s: timeout\n", __FUNCTION__); ++ return -1; ++ } ++ return 0; ++} ++ ++static int overlay1fb_blank(int blank, struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ int err=0; ++ ++ switch (blank) { ++ case 0: ++ err = overlay1fb_enable(info); ++ if (err) { ++ fbi->state = C_DISABLE; ++ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); ++ } ++ break; ++ case 1: ++ err = overlay1fb_disable(info); ++ if (err) { ++ fbi->state = C_DISABLE; ++ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); ++ } ++ break; ++ default: ++ break; ++ } ++ ++ return err; ++} ++ ++static int overlay1fb_check_var( struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ int xpos, ypos; ++ struct overlayfb_info *fbi=(struct overlayfb_info*)info; ++ ++ /* must in base frame */ ++ xpos = (var->nonstd & 0x3ff); ++ ypos = ((var->nonstd>>10) & 0x3ff); ++ ++ if ( (xpos + var->xres) > fbi->basefb->fb.var.xres ) ++ return -EINVAL; ++ ++ if ( (ypos + var->yres) > fbi->basefb->fb.var.yres ) ++ return -EINVAL; ++ ++ switch (var->bits_per_pixel) { ++ case 16: ++ if ( var->xres & 0x1 ) { ++ printk("xres should be a multiple of 2 pixels!\n"); ++ return -EINVAL; ++ } ++ break; ++ case 18: ++ case 19: ++ if ( var->xres & 0x7 ) { ++ printk("xres should be a multiple of 8 pixels!\n"); ++ return -EINVAL; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ fbi->old_var=*var; ++ ++ var->activate=FB_ACTIVATE_NOW; ++ ++ return 0; ++} ++ ++ ++static int overlay1fb_set_par(struct fb_info *info) ++{ ++ int nbytes=0, err=0, pixels_per_line=0; ++ ++ struct overlayfb_info *fbi=(struct overlayfb_info*)info; ++ struct fb_var_screeninfo *var = &fbi->fb.var; ++ ++ info->flags &= ~FBINFO_MISC_USEREVENT; ++ ++ if (fbi->state == C_BLANK) ++ return 0; ++ ++ if (fbi->state == C_DISABLE) ++ goto out1; ++ ++ /* only xpos & ypos change */ ++ if ( (var->xres == fbi->old_var.xres) && ++ (var->yres == fbi->old_var.yres) && ++ (var->bits_per_pixel == fbi->old_var.bits_per_pixel) ) ++ goto out2; ++ ++out1: ++ switch(var->bits_per_pixel) { ++ case 16: ++ /* 2 pixels per line */ ++ pixels_per_line = (fbi->fb.var.xres + 0x1) & (~0x1); ++ nbytes = 2; ++ ++ var->red = def_rgbt_16.red; ++ var->green = def_rgbt_16.green; ++ var->blue = def_rgbt_16.blue; ++ var->transp = def_rgbt_16.transp; ++ ++ break; ++ case 18: ++ /* 8 pixels per line */ ++ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); ++ nbytes = 3; ++ ++ var->red = def_rgb_18.red; ++ var->green = def_rgb_18.green; ++ var->blue = def_rgb_18.blue; ++ var->transp = def_rgb_18.transp; ++ ++ break; ++ case 19: ++ /* 8 pixels per line */ ++ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); ++ nbytes = 3; ++ ++ var->red = def_rgbt_19.red; ++ var->green = def_rgbt_19.green; ++ var->blue = def_rgbt_19.blue; ++ var->transp = def_rgbt_19.transp; ++ ++ break; ++ case 24: ++ pixels_per_line = fbi->fb.var.xres; ++ nbytes = 4; ++ ++ var->red = def_rgbt_24.red; ++ var->green = def_rgbt_24.green; ++ var->blue = def_rgbt_24.blue; ++ var->transp = def_rgbt_24.transp; ++ ++ break; ++ case 25: ++ pixels_per_line = fbi->fb.var.xres; ++ nbytes = 4; ++ ++ var->red = def_rgbt_25.red; ++ var->green = def_rgbt_25.green; ++ var->blue = def_rgbt_25.blue; ++ var->transp = def_rgbt_25.transp; ++ ++ break; ++ } ++ ++ fbi->fb.fix.line_length = nbytes * pixels_per_line; ++ fbi->fb.fix.smem_len = fbi->fb.fix.line_length * fbi->fb.var.yres; ++ ++ err= overlay1fb_map_video_memory((struct fb_info*)fbi); ++ ++ if (err) ++ return err; ++ ++out2: ++ fbi->xpos = var->nonstd & 0x3ff; ++ fbi->ypos = (var->nonstd>>10) & 0x3ff; ++ ++ overlay1fb_enable(info); ++ ++ return 0; ++ ++} ++ ++static struct fb_ops overlay1fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = overlay1fb_open, ++ .fb_release = overlay1fb_release, ++ .fb_check_var = overlay1fb_check_var, ++ .fb_set_par = overlay1fb_set_par, ++ .fb_blank = overlay1fb_blank, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++}; ++ ++ /* ++ * LCD enhancement : Overlay 2 ++ * ++ * Features: ++ * - support planar YCbCr420/YCbCr422/YCbCr444; ++ */ ++static int overlay2fb_open(struct fb_info *info, int user) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ int ret = 0; ++ ++ /* if basefb is disable, enable fb. */ ++ if (fbi->basefb && fbi->basefb->state != C_ENABLE) ++ pxafb_blank(VESA_NO_BLANKING, (struct fb_info *)(fbi->basefb)); ++ ++ down(&fbi->mutex); ++ ++ if (fbi->refcount) ++ ret = -EACCES; ++ else ++ fbi->refcount ++; ++ ++ up(&fbi->mutex); ++ fbi->fb.var.xres = fbi->fb.var.yres = 0; ++ ++ return ret; ++} ++ ++static int overlay2fb_release(struct fb_info *info, int user) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ ++ down(&fbi->mutex); ++ ++ if (fbi->refcount) ++ fbi->refcount --; ++ ++ up(&fbi->mutex); ++ ++ /* disable overlay when released */ ++ overlay2fb_blank(1, info); ++ ++ return 0; ++} ++ ++static int overlay2fb_map_YUV_memory( struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ unsigned int ylen, cblen, crlen, aylen, acblen, acrlen; ++ unsigned int yoff, cboff, croff; ++ unsigned int xres,yres; ++ unsigned int nbytes; ++ ++ ylen = cblen = crlen = aylen = acblen = acrlen = 0; ++ yoff = cboff = croff = 0; ++ ++ if (fbi->map_cpu) ++ dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma); ++ ++ yres = fbi->fb.var.yres; ++ ++ switch(fbi->format) { ++ case 0x4: /* YCbCr 4:2:0 planar */ ++ pr_debug("420 planar\n"); ++ /* 16 pixels per line */ ++ xres = (fbi->fb.var.xres + 0xf) & (~0xf); ++ fbi->fb.fix.line_length = xres; ++ ++ nbytes = xres * yres; ++ ylen = nbytes; ++ cblen = crlen = (nbytes/4); ++ ++ break; ++ case 0x3: /* YCbCr 4:2:2 planar */ ++ /* 8 pixles per line */ ++ pr_debug("422 planar\n"); ++ xres = (fbi->fb.var.xres + 0x7) & (~0x7); ++ fbi->fb.fix.line_length = xres; ++ ++ nbytes = xres * yres; ++ ylen = nbytes; ++ cblen = crlen = (nbytes/2); ++ ++ break; ++ case 0x2: /* YCbCr 4:4:4 planar */ ++ /* 4 pixels per line */ ++ pr_debug("444 planar\n"); ++ xres = (fbi->fb.var.xres + 0x3) & (~0x3); ++ fbi->fb.fix.line_length = xres; ++ ++ nbytes = xres * yres; ++ ylen = cblen = crlen = nbytes; ++ break; ++ } ++ ++ /* 16-bytes alignment for DMA */ ++ aylen = (ylen + 0xf) & (~0xf); ++ acblen = (cblen + 0xf) & (~0xf); ++ acrlen = (crlen + 0xf) & (~0xf); ++ ++ fbi->fb.fix.smem_len = aylen + acblen + acrlen; ++ ++ /* alloc memory */ ++ ++ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); ++ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, ++ &fbi->map_dma, GFP_KERNEL ); ++ ++ if (!fbi->map_cpu) return -ENOMEM; ++ ++ fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE; ++ fbi->screen_dma = fbi->map_dma + PAGE_SIZE; ++ ++ fbi->fb.fix.smem_start = fbi->screen_dma; ++ ++ /* setup dma for Planar format */ ++ fbi->dma2 = (struct pxafb_dma_descriptor*) ++ (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor)); ++ fbi->dma3 = fbi->dma2 - 1; ++ fbi->dma4 = fbi->dma3 - 1; ++ ++ /* offset */ ++ yoff = 0; ++ cboff = aylen; ++ croff = cboff + acblen; ++ ++ /* Y vector */ ++ fbi->dma2->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor)); ++ fbi->dma2->fsadr = fbi->screen_dma + yoff; ++ fbi->dma2->fidr = 0; ++ fbi->dma2->ldcmd = ylen; ++ ++ /* Cb vector */ ++ fbi->dma3->fdadr = (fbi->dma2->fdadr - sizeof(struct pxafb_dma_descriptor)); ++ fbi->dma3->fsadr = (fbi->screen_dma + cboff); ++ fbi->dma3->fidr = 0; ++ fbi->dma3->ldcmd = cblen; ++ ++ /* Cr vector */ ++ ++ fbi->dma4->fdadr = (fbi->dma3->fdadr - sizeof(struct pxafb_dma_descriptor)); ++ fbi->dma4->fsadr = (fbi->screen_dma + croff); ++ fbi->dma4->fidr = 0; ++ fbi->dma4->ldcmd = crlen; ++ ++ /* adjust for user */ ++ fbi->fb.var.red.length = ylen; ++ fbi->fb.var.red.offset = yoff; ++ fbi->fb.var.green.length = cblen; ++ fbi->fb.var.green.offset = cboff; ++ fbi->fb.var.blue.length = crlen; ++ fbi->fb.var.blue.offset = croff; ++ ++ return 0; ++}; ++ ++static int overlay2fb_map_RGB_memory( struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ struct fb_var_screeninfo *var = &fbi->fb.var; ++ int pixels_per_line=0 , nbytes=0; ++ ++ if (fbi->map_cpu) ++ dma_free_writecombine(NULL, fbi->map_size, (void*)fbi->map_cpu, fbi->map_dma); ++ ++ switch(var->bits_per_pixel) { ++ case 16: ++ /* 2 pixels per line */ ++ pixels_per_line = (fbi->fb.var.xres + 0x1) & (~0x1); ++ nbytes = 2; ++ ++ var->red = def_rgbt_16.red; ++ var->green = def_rgbt_16.green; ++ var->blue = def_rgbt_16.blue; ++ var->transp = def_rgbt_16.transp; ++ break; ++ ++ case 18: ++ /* 8 pixels per line */ ++ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); ++ nbytes = 3; ++ ++ var->red = def_rgb_18.red; ++ var->green = def_rgb_18.green; ++ var->blue = def_rgb_18.blue; ++ var->transp = def_rgb_18.transp; ++ ++ break; ++ case 19: ++ /* 8 pixels per line */ ++ pixels_per_line = (fbi->fb.var.xres + 0x7 ) & (~0x7); ++ nbytes = 3; ++ ++ var->red = def_rgbt_19.red; ++ var->green = def_rgbt_19.green; ++ var->blue = def_rgbt_19.blue; ++ var->transp = def_rgbt_19.transp; ++ ++ break; ++ case 24: ++ pixels_per_line = fbi->fb.var.xres; ++ nbytes = 4; ++ ++ var->red = def_rgbt_24.red; ++ var->green = def_rgbt_24.green; ++ var->blue = def_rgbt_24.blue; ++ var->transp = def_rgbt_24.transp; ++ ++ break; ++ ++ case 25: ++ pixels_per_line = fbi->fb.var.xres; ++ nbytes = 4; ++ ++ var->red = def_rgbt_25.red; ++ var->green = def_rgbt_25.green; ++ var->blue = def_rgbt_25.blue; ++ var->transp = def_rgbt_25.transp; ++ ++ break; ++ } ++ ++ fbi->fb.fix.line_length = nbytes * pixels_per_line; ++ fbi->fb.fix.smem_len = fbi->fb.fix.line_length * fbi->fb.var.yres; ++ ++ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE); ++ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, ++ &fbi->map_dma, GFP_KERNEL ); ++ ++ if (!fbi->map_cpu) return -ENOMEM; ++ ++ fbi->screen_cpu = fbi->map_cpu + PAGE_SIZE; ++ fbi->screen_dma = fbi->map_dma + PAGE_SIZE; ++ ++ fbi->fb.fix.smem_start = fbi->screen_dma; ++ ++ /* setup dma descriptor */ ++ fbi->dma2 = (struct pxafb_dma_descriptor*) ++ (fbi->screen_cpu - sizeof(struct pxafb_dma_descriptor)); ++ ++ fbi->dma2->fdadr = (fbi->screen_dma - sizeof(struct pxafb_dma_descriptor)); ++ fbi->dma2->fsadr = fbi->screen_dma; ++ fbi->dma2->fidr = 0; ++ fbi->dma2->ldcmd = fbi->fb.fix.smem_len; ++ ++ return 0; ++} ++ ++static int overlay2fb_enable(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ unsigned long bpp2; ++ unsigned int xres, yres; ++ ++ if (!fbi->map_cpu) return -EINVAL; ++ ++ switch(fbi->fb.var.bits_per_pixel) { ++ case 16: ++ bpp2 = 0x4; ++ break; ++ case 18: ++ bpp2 = 0x6; ++ break; ++ case 19: ++ bpp2 = 0x8; ++ break; ++ case 24: ++ bpp2 = 0x9; ++ break; ++ case 25: ++ bpp2 = 0xa; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ /* disable branch/start/end of frame interrupt */ ++ LCCR5 |= (LCCR5_IUM4 | LCCR5_IUM3 | LCCR5_IUM2 | ++ LCCR5_BSM4 | LCCR5_BSM3 | LCCR5_BSM2 | ++ LCCR5_EOFM4 | LCCR5_EOFM3 | LCCR5_EOFM2 | ++ LCCR5_SOFM4 | LCCR5_SOFM3 | LCCR5_SOFM2); ++ ++ if (fbi->format == 0) { ++ /* overlay2 RGB resolution, RGB and YUV have different xres value*/ ++ xres = fbi->fb.var.xres; ++ yres = fbi->fb.var.yres; ++ ++ OVL2C2 = (fbi->format << 20) | (fbi->ypos << 10) | fbi->xpos; ++ OVL2C1 = OVL2C1_O2EN | (bpp2 << 20) | ((yres-1)<<10) | (xres-1); ++ /* setup RGB DMA */ ++ if (fbi->state == C_DISABLE || fbi->state == C_BLANK) ++ FDADR2 = fbi->dma2->fdadr; ++ else ++ FBR2 = fbi->dma2->fdadr | 0x1; ++ } else { ++ /* overlay2 YUV resolution */ ++ xres = fbi->fb.fix.line_length; ++ yres = fbi->fb.var.yres; ++ ++ OVL2C2 = (fbi->format << 20) | (fbi->ypos << 10) | fbi->xpos; ++ OVL2C1 = OVL2C1_O2EN | (bpp2 << 20) | ((yres-1)<<10) | (xres-1); ++ ++ if (fbi->state == C_DISABLE || fbi->state == C_BLANK) { ++ FDADR2 = fbi->dma2->fdadr; ++ FDADR3 = fbi->dma3->fdadr; ++ FDADR4 = fbi->dma4->fdadr; ++ } else { ++ FBR2 = fbi->dma2->fdadr | 0x01; ++ FBR3 = fbi->dma3->fdadr | 0x01; ++ FBR4 = fbi->dma4->fdadr | 0x01; ++ } ++ } ++ ++ fbi->state = C_ENABLE; ++ return 0; ++} ++ ++static int overlay2fb_disable(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*)info; ++ int done; ++ ++ if (fbi->state == C_DISABLE) ++ return 0; ++ if (fbi->state == C_BLANK) { ++ fbi->state = C_DISABLE; ++ return 0; ++ } ++ ++ fbi->state = C_DISABLE; ++ ++ /* clear O2EN */ ++ OVL2C1 &= ~OVL2C1_O2EN; ++ ++ /* Make overlay2 can't disable/enable ++ * correctly sometimes. ++ */ ++ CLEAR_LCD_INTR(LCSR1, LCSR1_BS2); ++ ++ if (fbi->format == 0) ++ FBR2 = 0x3; ++ else { ++ FBR2 = 0x3; ++ FBR3 = 0x3; ++ FBR4 = 0x3; ++ } ++ ++ done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS2, 100); ++ ++ if (!done) { ++ pr_debug(KERN_INFO "%s: timeout\n", __FUNCTION__); ++ return -1; ++ } ++ return 0; ++} ++ ++static int overlay2fb_blank(int blank, struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ int err=0; ++ ++ switch(blank) ++ { ++ case 0: ++ err = overlay2fb_enable(info); ++ if (err) { ++ fbi->state = C_DISABLE; ++ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); ++ } ++ break; ++ case 1: ++ err = overlay2fb_disable(info); ++ if (err) { ++ fbi->state = C_DISABLE; ++ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); ++ } ++ break; ++ default: ++ /* reserved */ ++ break; ++ } ++ ++ return err; ++} ++ ++ ++static int overlay2fb_check_var( struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ int xpos, ypos, xres, yres; ++ int format; ++ struct overlayfb_info *fbi=(struct overlayfb_info*)info; ++ ++ xres=yres=0; ++ ++ xpos = (var->nonstd & 0x3ff); ++ ypos = (var->nonstd >> 10) & 0x3ff; ++ format = (var->nonstd >>20) & 0x7; ++ ++ ++ /* Palnar YCbCr444, YCbCr422, YCbCr420 */ ++ if ( (format != 0x4) && (format != 0x3) && (format != 0x2) && (format !=0x0)) ++ return -EINVAL; ++ ++ /* dummy pixels */ ++ switch(format) { ++ case 0x0: /* RGB */ ++ xres = var->xres; ++ break; ++ case 0x2: /* 444 */ ++ xres = (var->xres + 0x3) & ~(0x3); ++ break; ++ case 0x3: /* 422 */ ++ xres = (var->xres + 0x7) & ~(0x7); ++ break; ++ case 0x4: /* 420 */ ++ xres = (var->xres + 0xf) & ~(0xf); ++ break; ++ } ++ yres = var->yres; ++ ++ if ( (xpos + xres) > fbi->basefb->fb.var.xres ) ++ return -EINVAL; ++ ++ if ( (ypos + yres) > fbi->basefb->fb.var.yres ) ++ return -EINVAL; ++ ++ fbi->old_var=*var; ++ ++ var->activate=FB_ACTIVATE_NOW; ++ ++ return 0; ++ ++} ++ ++ ++/* ++ * overlay2fb_set_var() ++ * ++ * var.nonstd is used as YCbCr format. ++ * var.red/green/blue is used as (Y/Cb/Cr) vector ++ */ ++ ++static int overlay2fb_set_par(struct fb_info *info) ++{ ++ unsigned int xpos, ypos; ++ int format, err; ++ ++ struct overlayfb_info *fbi=(struct overlayfb_info*)info; ++ struct fb_var_screeninfo *var = &fbi->fb.var; ++ ++ info->flags &= ~FBINFO_MISC_USEREVENT; ++ ++ if (fbi->state == C_BLANK) ++ return 0; ++ ++ if (fbi->state == C_DISABLE) ++ goto out1; ++ ++ if ( (var->xres == fbi->old_var.xres) && ++ (var->yres == fbi->old_var.yres) && ++ (var->bits_per_pixel == fbi->old_var.bits_per_pixel) && ++ (((var->nonstd>>20) & 0x7) == fbi->format) ) ++ goto out2; ++ ++out1: ++ xpos = var->nonstd & 0x3ff; ++ ypos = (var->nonstd>>10) & 0x3ff; ++ format = (var->nonstd>>20) & 0x7; ++ ++ ++ fbi->format = format; ++ if ( fbi->format==0 ) ++ err = overlay2fb_map_RGB_memory(info); ++ else ++ err = overlay2fb_map_YUV_memory(info); ++ ++ if (err) return err; ++ ++out2: ++ /* position */ ++ fbi->xpos = var->nonstd & 0x3ff; ++ fbi->ypos = (var->nonstd>>10) & 0x3ff; ++ ++ overlay2fb_enable(info); ++ ++ return 0; ++} ++ ++static struct fb_ops overlay2fb_ops = { ++ .owner = THIS_MODULE, ++ .fb_open = overlay2fb_open, ++ .fb_release = overlay2fb_release, ++ .fb_check_var = overlay2fb_check_var, ++ .fb_set_par = overlay2fb_set_par, ++ .fb_blank = overlay2fb_blank, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++}; ++ ++/* Hardware cursor */ ++ ++/* Bulverde Cursor Modes */ ++struct cursorfb_mode{ ++ int xres; ++ int yres; ++ int bpp; ++}; ++ ++static struct cursorfb_mode cursorfb_modes[]={ ++ { 32, 32, 2}, ++ { 32, 32, 2}, ++ { 32, 32, 2}, ++ { 64, 64, 2}, ++ { 64, 64, 2}, ++ { 64, 64, 2}, ++ {128, 128, 1}, ++ {128, 128, 1} ++}; ++ ++static int cursorfb_enable(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ ++ if (!fbi->map_cpu) return -EINVAL; ++ ++ CCR &= ~CCR_CEN; ++ ++ /* set palette format ++ * ++ * FIXME: if only cursor uses palette ++ */ ++ LCCR4 = (LCCR4 & (~(0x3<<15))) | (0x1<<15); ++ ++ /* disable branch/start/end of frame interrupt */ ++ LCCR5 |= (LCCR5_IUM5 | LCCR5_BSM5 | LCCR5_EOFM5 | LCCR5_SOFM5); ++ ++ /* load palette and frame data */ ++ if (fbi->state == C_DISABLE) { ++ FDADR5 = fbi->dma5_pal->fdadr; ++ udelay(1); ++ FDADR5 = fbi->dma5_frame->fdadr; ++ udelay(1); ++ ++ } ++ else { ++ FBR5 = fbi->dma5_pal->fdadr | 0x1; ++ udelay(1); ++ FBR5 = fbi->dma5_frame->fdadr | 0x1; ++ udelay(1); ++ } ++ ++ CCR = CCR_CEN | (fbi->ypos << 15) | (fbi->xpos << 5) | (fbi->format); ++ ++ fbi->state = C_ENABLE; ++ ++ return 0; ++} ++ ++static int cursorfb_disable(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*)info; ++ int done, ret = 0; ++ ++ fbi->state = C_DISABLE; ++ ++ done = WAIT_FOR_LCD_INTR(LCSR1, LCSR1_BS5, 100); ++ if (!done) ret = -1; ++ ++ CCR &= ~CCR_CEN; ++ ++ return ret; ++} ++ ++static int cursorfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, ++ u_int trans, struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info *)info; ++ u_int val, ret = 1; ++ u_int *pal=(u_int*) fbi->palette_cpu; ++ ++ /* 25bit with Transparcy for 16bpp format */ ++ if (regno < fbi->palette_size) { ++ val = ((trans << 24) & 0x1000000); ++ val |= ((red << 16) & 0x0ff0000); ++ val |= ((green << 8 ) & 0x000ff00); ++ val |= ((blue << 0) & 0x00000ff); ++ ++ pal[regno] = val; ++ ret = 0; ++ } ++ return ret; ++} ++ ++int cursorfb_blank(int blank, struct fb_info *info) ++{ ++ switch(blank) ++ { ++ case 0: ++ cursorfb_enable(info); ++ break; ++ case 1: ++ cursorfb_disable(info); ++ break; ++ default: ++ /* reserved */ ++ break; ++ } ++ return 0; ++} ++ ++static int cursorfb_check_var( struct fb_var_screeninfo *var, struct fb_info *info) ++{ ++ int xpos, ypos, xres, yres; ++ int mode; ++ struct cursorfb_mode *cursor; ++ struct overlayfb_info *fbi=(struct overlayfb_info*)info; ++ ++ mode = var->nonstd & 0x7; ++ xpos = (var->nonstd>>5) & 0x3ff; ++ ypos = (var->nonstd>>15) & 0x3ff; ++ ++ if (mode>7 || mode <0 ) ++ return -EINVAL; ++ ++ cursor = cursorfb_modes + mode; ++ ++ xres = cursor->xres; ++ yres = cursor->yres; ++ ++ if ( (xpos + xres) > fbi->basefb->fb.var.xres ) ++ return -EINVAL; ++ ++ if ( (ypos + yres) > fbi->basefb->fb.var.yres ) ++ return -EINVAL; ++ ++ return 0; ++ ++} ++ ++static int cursorfb_set_par(struct fb_info *info) ++{ ++ struct overlayfb_info *fbi = (struct overlayfb_info*) info; ++ struct fb_var_screeninfo *var = &fbi->fb.var; ++ struct cursorfb_mode *cursor; ++ int mode, xpos, ypos; ++ int err; ++ ++ info->flags &= ~FBINFO_MISC_USEREVENT; ++ ++ mode = var->nonstd & 0x7; ++ xpos = (var->nonstd>>5) & 0x3ff; ++ ypos = (var->nonstd>>15) & 0x3ff; ++ ++ if (mode != fbi->format) { ++ cursor = cursorfb_modes + mode; ++ ++ /* update "var" info */ ++ fbi->fb.var.xres = cursor->xres; ++ fbi->fb.var.yres = cursor->yres; ++ fbi->fb.var.bits_per_pixel = cursor->bpp; ++ ++ /* alloc video memory ++ * ++ * 4k is engouh for 128x128x1 cursor, ++ * - 2k for cursor pixels, ++ * - 2k for palette data, plus 2 dma descriptor ++ */ ++ if (!fbi->map_cpu) { ++ fbi->map_size = PAGE_SIZE; ++ fbi->map_cpu = (unsigned long)dma_alloc_writecombine(NULL, fbi->map_size, ++ &fbi->map_dma, GFP_KERNEL ); ++ if (!fbi->map_cpu) return -ENOMEM; ++ } ++ ++ cursor = cursorfb_modes + mode; ++ ++ /* update overlay & fix "info" */ ++ fbi->screen_cpu = fbi->map_cpu; ++ fbi->palette_cpu = fbi->map_cpu + (PAGE_SIZE/2); ++ fbi->screen_dma = fbi->map_dma; ++ fbi->palette_dma = fbi->map_dma + (PAGE_SIZE/2); ++ ++ fbi->format = mode; ++ fbi->palette_size = (1<<cursor->bpp); ++ fbi->fb.fix.smem_start = fbi->screen_dma; ++ fbi->fb.fix.smem_len = cursor->xres * cursor->yres * cursor->bpp / 8; ++ fbi->fb.fix.line_length = cursor->xres * cursor->bpp / 8; ++ ++ fbi->dma5_pal = (struct pxafb_dma_descriptor*)(fbi->map_cpu + PAGE_SIZE - 16 ); ++ fbi->dma5_pal->fdadr = (fbi->map_dma + PAGE_SIZE - 16); ++ fbi->dma5_pal->fsadr = fbi->palette_dma; ++ fbi->dma5_pal->fidr = 0; ++ fbi->dma5_pal->ldcmd = (fbi->palette_size<<2) | LDCMD_PAL; ++ ++ fbi->dma5_frame = (struct pxafb_dma_descriptor*)(fbi->map_cpu + PAGE_SIZE - 32 ); ++ fbi->dma5_frame->fdadr = (fbi->map_dma + PAGE_SIZE - 32); ++ fbi->dma5_frame->fsadr = fbi->screen_dma; ++ fbi->dma5_frame->fidr = 0; ++ fbi->dma5_frame->ldcmd = fbi->fb.fix.smem_len; ++ ++ /* alloc & set default cmap */ ++ err = fb_alloc_cmap(&fbi->fb.cmap, fbi->palette_size, 0); ++ if (err) return err; ++ err = fb_set_cmap(&fbi->fb.cmap, info); ++ if (err) return err; ++ } ++ ++ /* update overlay info */ ++ if ( (xpos != fbi->xpos) || (ypos != fbi->ypos) ) { ++ fbi->xpos = xpos; ++ fbi->ypos = ypos; ++ } ++ ++ cursorfb_enable(info); ++ pxafb_set_ctrlr_state(fbi->basefb, C_REENABLE); ++ ++ return 0; ++} ++ ++static struct fb_ops cursorfb_ops = { ++ .owner = THIS_MODULE, ++ .fb_check_var = cursorfb_check_var, ++ .fb_set_par = cursorfb_set_par, ++ .fb_blank = cursorfb_blank, ++ .fb_fillrect = cfb_fillrect, ++ .fb_copyarea = cfb_copyarea, ++ .fb_imageblit = cfb_imageblit, ++ .fb_setcolreg = cursorfb_setcolreg, ++}; ++ ++static struct overlayfb_info * __init overlay1fb_init_fbinfo(void) ++{ ++ struct overlayfb_info *fbi; ++ ++ fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL); ++ if (!fbi) ++ return NULL; ++ ++ memset(fbi, 0, sizeof(struct overlayfb_info) ); ++ ++ fbi->refcount = 0; ++ init_MUTEX(&fbi->mutex); ++ ++ strcpy(fbi->fb.fix.id, "overlay1"); ++ ++ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ fbi->fb.fix.type_aux = 0; ++ fbi->fb.fix.xpanstep = 0; ++ fbi->fb.fix.ypanstep = 0; ++ fbi->fb.fix.ywrapstep = 0; ++ fbi->fb.fix.accel = FB_ACCEL_NONE; ++ ++ fbi->fb.var.nonstd = 0; ++ fbi->fb.var.activate = FB_ACTIVATE_NOW; ++ fbi->fb.var.height = -1; ++ fbi->fb.var.width = -1; ++ fbi->fb.var.accel_flags = 0; ++ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ ++ ++ fbi->fb.fbops = &overlay1fb_ops; ++ fbi->fb.flags = FBINFO_FLAG_DEFAULT; ++ fbi->fb.node = -1; ++ fbi->fb.pseudo_palette = NULL; ++ ++ fbi->xpos = 0; ++ fbi->ypos = 0; ++ fbi->format = -1; ++ fbi->state = C_DISABLE; ++ ++ return fbi; ++} ++ ++static struct overlayfb_info * __init overlay2fb_init_fbinfo(void) ++{ ++ struct overlayfb_info *fbi; ++ ++ fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL); ++ if (!fbi) ++ return NULL; ++ ++ memset(fbi, 0, sizeof(struct overlayfb_info) ); ++ ++ fbi->refcount = 0; ++ init_MUTEX(&fbi->mutex); ++ ++ strcpy(fbi->fb.fix.id, "overlay2"); ++ ++ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ fbi->fb.fix.type_aux = 0; ++ fbi->fb.fix.xpanstep = 0; ++ fbi->fb.fix.ypanstep = 0; ++ fbi->fb.fix.ywrapstep = 0; ++ fbi->fb.fix.accel = FB_ACCEL_NONE; ++ ++ fbi->fb.var.nonstd = 0; ++ fbi->fb.var.activate = FB_ACTIVATE_NOW; ++ fbi->fb.var.height = -1; ++ fbi->fb.var.width = -1; ++ fbi->fb.var.accel_flags = 0; ++ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ ++ fbi->fb.fbops = &overlay2fb_ops; ++ fbi->fb.flags = FBINFO_FLAG_DEFAULT; ++ fbi->fb.node = -1; ++ fbi->fb.pseudo_palette = NULL; ++ ++ fbi->xpos = 0; ++ fbi->ypos = 0; ++ fbi->format = -1; ++ fbi->state = C_DISABLE; ++ ++ return fbi; ++} ++ ++static struct overlayfb_info * __init cursorfb_init_fbinfo(void) ++{ ++ struct overlayfb_info *fbi; ++ ++ fbi = kmalloc(sizeof(struct overlayfb_info) + sizeof(u16) * 16, GFP_KERNEL); ++ if (!fbi) ++ return NULL; ++ ++ memset(fbi, 0, sizeof(struct overlayfb_info) ); ++ ++ fbi->refcount = 0; ++ init_MUTEX(&fbi->mutex); ++ ++ strcpy(fbi->fb.fix.id, "cursor"); ++ ++ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS; ++ fbi->fb.fix.type_aux = 0; ++ fbi->fb.fix.xpanstep = 0; ++ fbi->fb.fix.ypanstep = 0; ++ fbi->fb.fix.ywrapstep = 0; ++ fbi->fb.fix.accel = FB_ACCEL_NONE; ++ ++ fbi->fb.var.nonstd = 0; ++ fbi->fb.var.activate = FB_ACTIVATE_NOW; ++ fbi->fb.var.height = -1; ++ fbi->fb.var.width = -1; ++ fbi->fb.var.accel_flags = 0; ++ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED; ++ ++ fbi->fb.fbops = &cursorfb_ops; ++ fbi->fb.flags = FBINFO_FLAG_DEFAULT; ++ fbi->fb.node = -1; ++ fbi->fb.pseudo_palette = NULL; ++ ++ ++ fbi->xpos = 0; ++ fbi->ypos = 0; ++ fbi->format = -1; ++ fbi->state = C_DISABLE; ++ ++ return fbi; ++} ++ ++ ++void pxa_set_overlay_ctrlr_state(struct pxafb_info *fbi, u_int state) ++{ ++ switch (state) { ++ case C_DISABLE: ++ DISABLE_OVERLAYS(fbi); ++ break; ++ case C_ENABLE: ++ ENABLE_OVERLAYS(fbi); ++ break; ++ case C_BLANK: ++ BLANK_OVERLAYS(fbi); ++ break; ++ case C_UNBLANK: ++ UNBLANK_OVERLAYS(fbi); ++ break; ++ default: ++ break; ++ } ++} ++ ++static int is_pxafb_device(struct device * dev, void * data) ++{ ++ struct platform_device *pdev = container_of(dev, struct platform_device, dev); ++ ++ return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0); ++} ++ ++static int __devinit pxafb_overlay_init(void) ++{ ++ int ret; ++ struct overlayfb_info *overlay1fb, *overlay2fb, *cursorfb; ++ struct pxafb_info *fbi; ++ struct device *dev; ++ ++ ret = -1; ++ overlay1fb = overlay2fb = cursorfb = NULL; ++ fbi = NULL; ++ ++ dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); ++ if (!dev) { ++ printk(KERN_INFO "Base framebuffer not exists, failed to load overlay driver!\n"); ++ return ret; ++ } ++ ++ fbi = dev_get_drvdata(dev); ++ if (fbi == NULL) { ++ printk(KERN_INFO "Base framebuffer not initialized, failed to load overlay driver!\n"); ++ return ret; ++ } ++ ++ /* Overlay 1 windows */ ++ overlay1fb = overlay1fb_init_fbinfo(); ++ ++ if (!overlay1fb) { ++ ret = -ENOMEM; ++ printk("overlay1fb_init_fbinfo failed\n"); ++ goto failed; ++ } ++ ++ ret = register_framebuffer(&overlay1fb->fb); ++ if (ret < 0) ++ goto failed; ++ ++ /* Overlay 2 window */ ++ overlay2fb = overlay2fb_init_fbinfo(); ++ ++ if (!overlay2fb) { ++ ret = -ENOMEM; ++ printk("overlay2fb_init_fbinfo failed\n"); ++ goto failed; ++ } ++ ++ ret = register_framebuffer(&overlay2fb->fb); ++ if (ret < 0) goto failed; ++ ++ /* Hardware cursor window */ ++ cursorfb = cursorfb_init_fbinfo(); ++ ++ if (!cursorfb) { ++ ret = -ENOMEM; ++ printk("cursorfb_init_fbinfo failed\n"); ++ goto failed; ++ } ++ ++ ret = register_framebuffer(&cursorfb->fb); ++ if (ret < 0) goto failed; ++ ++ ++ /* set refernce to Overlays */ ++ fbi->overlay1fb = overlay1fb; ++ fbi->overlay2fb = overlay2fb; ++ fbi->cursorfb = cursorfb; ++ fbi->set_overlay_ctrlr_state=pxa_set_overlay_ctrlr_state; ++ ++ /* set refernce to BaseFrame */ ++ overlay1fb->basefb = fbi; ++ overlay2fb->basefb = fbi; ++ cursorfb->basefb = fbi; ++ ++ printk(KERN_INFO "Load PXA Overlay driver successfully!\n"); ++ ++ return 0; ++ ++failed: ++ if (overlay1fb) ++ kfree(overlay1fb); ++ if (overlay2fb) ++ kfree(overlay2fb); ++ if (cursorfb) ++ kfree(cursorfb); ++ printk(KERN_INFO "Load PXA Overlay driver failed!\n"); ++ return ret; ++} ++ ++static void __exit pxafb_overlay_exit(void) ++{ ++ struct pxafb_info *fbi; ++ struct device *dev; ++ ++ dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); ++ if (!dev) ++ return; ++ ++ fbi = dev_get_drvdata(dev); ++ if (!fbi) ++ return; ++ ++ if (fbi->overlay1fb) { ++ unregister_framebuffer(&(fbi->overlay1fb->fb)); ++ kfree(fbi->overlay1fb); ++ fbi->overlay1fb = NULL; ++ } ++ ++ if (fbi->overlay2fb) { ++ unregister_framebuffer(&(fbi->overlay2fb->fb)); ++ kfree(fbi->overlay2fb); ++ fbi->overlay2fb = NULL; ++ } ++ ++ if (fbi->cursorfb) { ++ unregister_framebuffer(&(fbi->cursorfb->fb)); ++ kfree(fbi->cursorfb); ++ fbi->cursorfb = NULL; ++ } ++ ++ fbi->set_overlay_ctrlr_state = NULL; ++ ++ printk(KERN_INFO "Unload PXA Overlay driver successfully!\n"); ++ return; ++} ++ ++ ++module_init(pxafb_overlay_init); ++module_exit(pxafb_overlay_exit); ++ ++MODULE_DESCRIPTION("Loadable framebuffer overlay driver for PXA"); ++MODULE_LICENSE("GPL"); ++ +Index: linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/pxa-regs.h 2007-10-10 09:38:46.000000000 +0200 ++++ linux-2.6.23/include/asm-arm/arch-pxa/pxa-regs.h 2007-10-22 21:53:54.000000000 +0200 +@@ -789,11 +789,18 @@ + #define UDC_INT_PACKETCMP (0x1) + + #define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) ++/* Older defines, do not use. */ + #define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ + #define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ + #define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ + #define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ + #define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ ++/* New defines. */ ++#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ ++#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ ++#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */ ++#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */ ++#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ + + #define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ + #define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ +@@ -1826,6 +1833,8 @@ + #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ + #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ + #define LCSR __REG(0x44000038) /* LCD Controller Status Register */ ++#define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ ++#define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ + #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ + #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ + #define TMEDCR __REG(0x44000044) /* TMED Control Register */ +@@ -1835,6 +1844,10 @@ + #define LCCR3_4BPP (2 << 24) + #define LCCR3_8BPP (3 << 24) + #define LCCR3_16BPP (4 << 24) ++#define LCCR3_18BPP (6 << 24) ++#define LCCR3_19BPP (8 << 24) ++#define LCCR3_24BPP (9 << 24) ++#define LCCR3_25BPP (10<< 24) + + #define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ + #define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ +@@ -1999,6 +2012,104 @@ + + #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ + ++/* Overlay1 & Overlay2 & Hardware Cursor */ ++#define LCSR1_SOF1 (1 << 0) ++#define LCSR1_SOF2 (1 << 1) ++#define LCSR1_SOF3 (1 << 2) ++#define LCSR1_SOF4 (1 << 3) ++#define LCSR1_SOF5 (1 << 4) ++#define LCSR1_SOF6 (1 << 5) ++ ++#define LCSR1_EOF1 (1 << 8) ++#define LCSR1_EOF2 (1 << 9) ++#define LCSR1_EOF3 (1 << 10) ++#define LCSR1_EOF4 (1 << 11) ++#define LCSR1_EOF5 (1 << 12) ++#define LCSR1_EOF6 (1 << 13) ++ ++#define LCSR1_BS1 (1 << 16) ++#define LCSR1_BS2 (1 << 17) ++#define LCSR1_BS3 (1 << 18) ++#define LCSR1_BS4 (1 << 19) ++#define LCSR1_BS5 (1 << 20) ++#define LCSR1_BS6 (1 << 21) ++ ++#define LCSR1_IU2 (1 << 25) ++#define LCSR1_IU3 (1 << 26) ++#define LCSR1_IU4 (1 << 27) ++#define LCSR1_IU5 (1 << 28) ++#define LCSR1_IU6 (1 << 29) ++ ++#define LDCMD_SOFINT (1 << 22) ++#define LDCMD_EOFINT (1 << 21) ++ ++ ++#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ ++#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ ++#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ ++#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ ++#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ ++#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ ++ ++#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ ++#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ ++#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ ++#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ ++#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ ++#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ ++ ++#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ ++#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ ++#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ ++#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ ++#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ ++#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ ++ ++#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ ++#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ ++#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ ++#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ ++#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ ++#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ ++ ++#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ ++#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ ++#define CCR_CEN (1<<31) /* Enable bit for Cursor */ ++ ++/* LCD registers */ ++#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ ++#define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ ++#define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ ++#define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ ++#define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ ++#define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ ++#define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ ++#define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ ++#define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ ++#define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ ++#define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ ++#define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ ++#define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ ++#define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ ++#define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ ++#define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ ++#define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ ++#define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ ++#define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ ++#define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ ++#define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ ++#define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ ++#define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ ++ ++#define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ ++#define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ ++#define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ ++#define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ ++#define CCR __REG(0x44000090) /* Cursor Control Register */ ++ ++#define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ ++#define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ ++ + /* + * Memory controller + */ diff --git a/packages/linux/linux-ezx-2.6.23/patches/series b/packages/linux/linux-ezx-2.6.23/patches/series new file mode 100644 index 0000000000..c7738e4b61 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/patches/series @@ -0,0 +1,106 @@ +binutils-buildid-arm.patch +patch-2.6.23.1 +pxa27x_overlay-r7.patch + +ezx-core.patch +# ezx-core TODO: should be ezx-common +# look at the pxa-regs.h diff and put each definition on the proper patch +# register a machine type for each phone model + +# enable this patch ONLY if you have STUART connected and dont forget +# to change your cmdline if you want console on STUART. +#ezx-enable-stuart.patch + +ezx-bp.patch +# ezx-bp TODO: +# try to run this as a module - this may solve timing issues for opentapi. +# suspend/resume (not sure if it can be handled here) +# implement 2nd gen handshake support +# move platform device to ezx-phone.c + +ezx-pm.patch + +ezx-pcap.patch +# ezx-pcap TODO: +# move vibrator level function to the vibrator driver + +a780-pcap.patch +e680-pcap.patch +a1200-pcap.patch +e6-pcap.patch + +a780-mci.patch +e680-mci.patch +a1200-mci.patch +e6-mci.patch + +pxa27x-udc-support.3.patch + +ezx-emu.patch +# ezx-emu TODO: +# userspace interface for controling emu +# read adc to find which accessory is plugged +a780-emu.patch +e680-emu.patch + +pxa27x-udc-fix-a1200.patch #(see ezx-a1200.c) +ezx-eoc.patch +a1200-eoc.patch +e6-eoc.patch + +ezx-mtd-map.patch + +ezx-serial-bug-workaround.patch + +pxa-kbd.patch +a780-kbd.patch +e680-kbd.patch +a1200-kbd.patch + +pcap-ts.patch +a780-ts.patch +e680-ts.patch +a1200-ts.patch +e6-ts.patch + +ezx-backlight.patch + +a780-flip.patch +e680-locksw.patch +a1200-flip.patch + +a780-leds.patch +e680-leds.patch + +a780-vibrator.patch + +# mux_cli patches +mux_cli.patch +mux-fix.patch +mux-fix-init-errorpath.patch +mux-remove-flipbuffers.patch +mux-remove-get_halted_bit.patch +mux-remove-usbh_finished_resume.patch +mux-fix-makefile.patch +mux-fix-tty-driver.patch +mux-linux-2.6.21-fix.patch +#mux-ifdef-ezx-features.patch +#mux_debug.patch + +asoc-pxa-ssp.patch +asoc-fix-loopback.patch +ezx-asoc.patch + +# mux_cli TODO: +# merge patches +# try to understand the code and cleanup (painful) + +# Global TODO: +# compile everything as module and test for insmod/rmmod +# can NOT run as module (yet) +# pxa-ohci, ts0710_mux, ts0710_mux_usb, ezx-bp + +# the folowing break too much stuff on other phones. + +# incomplete + diff --git a/packages/linux/linux-ezx-2.6.23/rokre2/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/rokre2/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/rokre2/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/rokre2/defconfig b/packages/linux/linux-ezx-2.6.23/rokre2/defconfig new file mode 100755 index 0000000000..206ae45fc7 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/rokre2/defconfig @@ -0,0 +1,1189 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:05:01 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +CONFIG_PXA_EZX_A1200=y +# CONFIG_PXA_EZX_E6 is not set +# CONFIG_EZX_BP is not set +CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y +# CONFIG_EZX_EMU is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_EZX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_EZX is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/rokre6/.mtn2git_empty b/packages/linux/linux-ezx-2.6.23/rokre6/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/rokre6/.mtn2git_empty diff --git a/packages/linux/linux-ezx-2.6.23/rokre6/defconfig b/packages/linux/linux-ezx-2.6.23/rokre6/defconfig new file mode 100755 index 0000000000..733566adc6 --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/rokre6/defconfig @@ -0,0 +1,1203 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.23.1 +# Wed Oct 24 18:07:51 2007 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +CONFIG_PXA_EZX=y +# CONFIG_PXA_EZX_E680 is not set +# CONFIG_PXA_EZX_A780 is not set +# CONFIG_PXA_EZX_E2 is not set +# CONFIG_PXA_EZX_A1200 is not set +CONFIG_PXA_EZX_E6=y +# CONFIG_EZX_BP is not set +CONFIG_EZX_PCAP=y +CONFIG_EZX_EOC=y +# CONFIG_EZX_EMU is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext2 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug mem=32M@0xA0000000" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_LEGACY is not set +# CONFIG_PM_DEBUG is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_SUSPEND is not set +CONFIG_APM_EMULATION=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_EZX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_PXA27x is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_PXA=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_HWMON is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_EZX is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +CONFIG_FB_PXA_LCD_QVGA=y +# CONFIG_FB_PXA_LCD_VGA is not set +CONFIG_FB_PXA_OVERLAY=y +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y +CONFIG_SND_PXA2XX_SOC_SSP=y +CONFIG_SND_PXA2XX_SOC_EZX=y + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_PCAP2=y + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFS_DIRECTIO=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-ezx-2.6.23/update_patches.sh b/packages/linux/linux-ezx-2.6.23/update_patches.sh new file mode 100644 index 0000000000..9988e8926b --- /dev/null +++ b/packages/linux/linux-ezx-2.6.23/update_patches.sh @@ -0,0 +1,16 @@ +#!/bin/sh +set -e + +# Helper script to update patches and speedup filling the SRC_URI section of our .bb +# Run it while in packages/linux/linux-ezx-2.6.x/ + +[ -d patches ] && mtn drop -R patches +rm -rf patches + +svn --quiet co http://svn.openezx.org/branches/kernel-2.6.23.x-patches patches +find patches -type f -print0 +mtn add patches patches/* + +cat patches/series | grep ^[0-9A-Za-z] | sed -e 's/.*/\tfile:\/\/patches\/\0;patch=1 \\/' +ls -1 patches/defconfig-* | sed -e 's/.*/\tfile:\/\/\0 \\/' + diff --git a/packages/linux/linux-ezx_2.6.23.bb b/packages/linux/linux-ezx_2.6.23.bb new file mode 100644 index 0000000000..f34f8ca367 --- /dev/null +++ b/packages/linux/linux-ezx_2.6.23.bb @@ -0,0 +1,110 @@ +DESCRIPTION = "2.6 Linux Development Kernel for the Motorola GSM phones A780 and E680" +AUTHOR = "The OpenEZX Team <openezx-devel@lists.openezx.org>" +HOMEPAGE = "http://www.openezx.org" +EZX = "ezxdev" +PR = "${EZX}-r0" + +# unstable branch, use 2.6.21 if you want something working +DEFAULT_PREFERENCE = "-99" + +# last sync: svn revision 2068 + +require linux.inc + +RPSRC = "http://www.rpsys.net/openzaurus/patches/archive" + +SRC_URI = " \ + ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \ + file://logo_linux_clut224.ppm \ + \ + file://patches/binutils-buildid-arm.patch;patch=1 \ + file://patches/patch-2.6.23.1;patch=1 \ + file://patches/pxa27x_overlay-r7.patch;patch=1 \ + file://patches/ezx-core.patch;patch=1 \ + file://patches/ezx-bp.patch;patch=1 \ + file://patches/ezx-pm.patch;patch=1 \ + file://patches/ezx-pcap.patch;patch=1 \ + file://patches/a780-pcap.patch;patch=1 \ + file://patches/e680-pcap.patch;patch=1 \ + file://patches/a1200-pcap.patch;patch=1 \ + file://patches/e6-pcap.patch;patch=1 \ + file://patches/a780-mci.patch;patch=1 \ + file://patches/e680-mci.patch;patch=1 \ + file://patches/a1200-mci.patch;patch=1 \ + file://patches/e6-mci.patch;patch=1 \ + file://patches/pxa27x-udc-support.3.patch;patch=1 \ + file://patches/ezx-emu.patch;patch=1 \ + file://patches/a780-emu.patch;patch=1 \ + file://patches/e680-emu.patch;patch=1 \ + file://patches/pxa27x-udc-fix-a1200.patch;patch=1 \ + file://patches/ezx-eoc.patch;patch=1 \ + file://patches/a1200-eoc.patch;patch=1 \ + file://patches/e6-eoc.patch;patch=1 \ + file://patches/ezx-mtd-map.patch;patch=1 \ + file://patches/ezx-serial-bug-workaround.patch;patch=1 \ + file://patches/pxa-kbd.patch;patch=1 \ + file://patches/a780-kbd.patch;patch=1 \ + file://patches/e680-kbd.patch;patch=1 \ + file://patches/a1200-kbd.patch;patch=1 \ + file://patches/pcap-ts.patch;patch=1 \ + file://patches/a780-ts.patch;patch=1 \ + file://patches/e680-ts.patch;patch=1 \ + file://patches/a1200-ts.patch;patch=1 \ + file://patches/e6-ts.patch;patch=1 \ + file://patches/ezx-backlight.patch;patch=1 \ + file://patches/a780-flip.patch;patch=1 \ + file://patches/e680-locksw.patch;patch=1 \ + file://patches/a1200-flip.patch;patch=1 \ + file://patches/a780-leds.patch;patch=1 \ + file://patches/e680-leds.patch;patch=1 \ + file://patches/a780-vibrator.patch;patch=1 \ + file://patches/mux_cli.patch;patch=1 \ + file://patches/mux-fix.patch;patch=1 \ + file://patches/mux-fix-init-errorpath.patch;patch=1 \ + file://patches/mux-remove-flipbuffers.patch;patch=1 \ + file://patches/mux-remove-get_halted_bit.patch;patch=1 \ + file://patches/mux-remove-usbh_finished_resume.patch;patch=1 \ + file://patches/mux-fix-makefile.patch;patch=1 \ + file://patches/mux-fix-tty-driver.patch;patch=1 \ + file://patches/mux-linux-2.6.21-fix.patch;patch=1 \ + file://patches/asoc-pxa-ssp.patch;patch=1 \ + file://patches/asoc-fix-loopback.patch;patch=1 \ + file://patches/ezx-asoc.patch;patch=1 \ + file://defconfig \ + " + +S = "${WORKDIR}/linux-${PV}" + + +############################################################## +# kernel image resides on a seperate flash partition (for now) +# But we can flash it from userspace (flash_unlock /dev/mtdX && flash_eraseall /dev/mtdX && flashcp /boot/zImage /dev/mtdX) +# so lets make a package of it. What about a postinst that flashes the new kernel? + +COMPATIBLE_HOST = "arm.*-linux" +COMPATIBLE_MACHINE = '(a780|e680|a1200|rorkre2|rokre6)' + +# For now the code for serial console is disabled in compress.c +#CMDLINE_CON = "console=ttyS2,115200n8 console=tty1 " +CMDLINE_CON = "console=tty1 " + +CMDLINE_ROOT = "root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1" +CMDLINE_NFSROOT = "root=/dev/nfs rootfstype=nfs nfsroot=192.168.0.200:/export/ezx-image rootdelay=1 " +# Uncomment to enable dyntick +#CMDLINE_OTHER = "dyntick=enable" +CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}' +CMDLINE_IP = "ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0" +CMDLINE_MEM = "mem=32M@0xA0000000 mem=16M@0xAC000000" +CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG} ${CMDLINE_MEM}" +# Uncomment to use root-over-nfs-over-usb +#CMDLINE_NFSROOT_USB = "${CMDLINE_CON} ${CMDLINE_NFSROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG} ${CMDLINE_MEM}" + +# 1024x1024 once was the maximum kernel size for boot-over-usb -- is it still? +#KERNEL_IMAGE_MAXSIZE = "1294336" + +############################################################### +# module configs specific to this kernel +# +#module_autoload_pxaficp_ir = "pxaficp_ir" +#module_autoload_snd-pcm-oss = "snd-pcm-oss" + diff --git a/packages/linux/linux-openmoko-devel_svn+2.6.23.1.bb b/packages/linux/linux-openmoko-devel_svn+2.6.23.1.bb index e1686eada9..6be1a2382f 100644 --- a/packages/linux/linux-openmoko-devel_svn+2.6.23.1.bb +++ b/packages/linux/linux-openmoko-devel_svn+2.6.23.1.bb @@ -1,4 +1,5 @@ require linux.inc +require linux-openmoko.inc DESCRIPTION = "Linux 2.6.x (development) kernel for FIC SmartPhones shipping w/ OpenMoko" VANILLA_VERSION = "2.6.23" @@ -10,7 +11,7 @@ KERNEL_RELEASE = "2.6.23.1" KERNEL_VERSION = "${KERNEL_RELEASE}" PV = "${KERNEL_RELEASE}+svnr${SRCREV}" -PR = "r1" +PR = "r2" KERNEL_IMAGETYPE = "uImage" UBOOT_ENTRYPOINT = "30008000" diff --git a/packages/linux/linux-openmoko.inc b/packages/linux/linux-openmoko.inc index e6e41cfc08..fc4a547fd7 100644 --- a/packages/linux/linux-openmoko.inc +++ b/packages/linux/linux-openmoko.inc @@ -1,100 +1,9 @@ -SECTION = "kernel" -AUTHOR = "Harald Welte <laforge@openmoko.org>" -HOMEPAGE = "http://www.openmoko.org" -LICENSE = "GPL" -DEPENDS += "u-boot-mkimage-openmoko-native" +# extra stuff we need for openmoko that is not in linux.inc -inherit kernel - -FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-openmoko" -DEFCONFIG = "defconfig-${VANILLA_VERSION}-${MACHINE}" - -############################################################## -# source and patches -# -SRCREV_FORMAT = "patches" - -SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${VANILLA_VERSION}.tar.bz2 \ - file://${DEFCONFIG} \ - file://logo_linux_clut224.ppm" -S = "${WORKDIR}/linux-${VANILLA_VERSION}" - -############################################################## -# kernel image resides on a seperate flash partition (for now) -# -FILES_kernel-image = "" -ALLOW_EMPTY = "1" - -COMPATIBLE_HOST = "arm.*-linux" -COMPATIBLE_MACHINE = 'fic-gta01|fic-gta02' - -CMDLINE = "unused -- bootloader passes ATAG list" - -############################################################### -# module configs specific to this kernel -# - -# usb -module_autoload_ohci-hcd = "ohci-hcd" -module_autoload_hci_usb = "hci_usb" -module_autoload_g_ether = "g_ether" -# audio -module_autoload_snd-soc-neo1973-wm8753 = "snd-soc-neo1973-wm8753" -# sd/mmc -module_autoload_s3cmci = "s3cmci" - -do_prepatch() { - mv ${WORKDIR}/patches ${S}/patches && cd ${S} && quilt push -av - mv patches patches.openmoko - mv .pc .pc.old -} - -do_configure() { - install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm - - if [ ! -e ${WORKDIR}/${DEFCONFIG} ]; then - die "No default configuration for ${MACHINE} available." - fi - - echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config - - if [ "${TARGET_OS}" = "linux-gnueabi" ]; then - echo "CONFIG_AEABI=y" >> ${S}/.config - echo "CONFIG_OABI_COMPAT=y" >> ${S}/.config - else - echo "# CONFIG_AEABI is not set" >> ${S}/.config - echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config - fi - - sed -e '/CONFIG_AEABI/d' \ - -e '/CONFIG_OABI_COMPAT=/d' \ - -e '/CONFIG_CMDLINE=/d' \ - -e '/CONFIG_MTD_MTDRAM_SA1100=/d' \ - -e '/CONFIG_MTDRAM_TOTAL_SIZE=/d' \ - -e '/CONFIG_MTDRAM_ERASE_SIZE=/d' \ - -e '/CONFIG_MTDRAM_ABS_POS=/d' \ - '${WORKDIR}/${DEFCONFIG}' >>'${S}/.config' - - yes '' | oe_runmake oldconfig -} - -############################################################### -# put into deploy directory and append u-boot header -# -do_deploy() { - install -d ${DEPLOY_DIR_IMAGE} - install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE_CLASS}.bin - tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE_CLASS}.tgz -C ${D} lib - ${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin - rm -f linux.bin.gz - gzip -9 linux.bin - ${STAGING_BINDIR_NATIVE}/uboot-mkimage -A arm -O linux -T kernel -C gzip -a 30008000 -e 30008000 -n "OpenMoko Kernel Image Neo1973(GTA01/2)" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE_CLASS}.bin +do_deploy_append() { + mv ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${PR}-${MACHINE}.tgz ${DEPLOY_DIR_IMAGE}/modules-${PV}-${PR}-${MACHINE_CLASS}.tgz + mv ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE}-${DATETIME}.bin ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE_CLASS}.bin + rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.bin ln -sf ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${PR}-${MACHINE_CLASS}.bin ${DEPLOY_DIR_IMAGE}/uImage-${MACHINE_CLASS}-latest.bin - rm -f linux.bin.gz } -do_deploy[dirs] = "${S}" - -addtask prepatch before do_patch after do_unpack -addtask deploy before do_package after do_install - diff --git a/packages/linux/linux-openmoko_2.6.22.5.bb b/packages/linux/linux-openmoko_2.6.22.5.bb index 7241d59183..239400df15 100644 --- a/packages/linux/linux-openmoko_2.6.22.5.bb +++ b/packages/linux/linux-openmoko_2.6.22.5.bb @@ -1,4 +1,5 @@ require linux.inc +require linux-openmoko.inc DESCRIPTION = "Linux 2.6.x kernel for FIC SmartPhones shipping w/ OpenMoko" VANILLA_VERSION = "2.6.22" @@ -8,7 +9,7 @@ KERNEL_RELEASE = "2.6.22.5" #PV = "${VANILLA_VERSION}+${KERNEL_RELEASE}-moko11+svnr${SRCREV}" PV = "${KERNEL_RELEASE}-moko11+svnr${SRCREV}" -PR = "r4" +PR = "r5" KERNEL_IMAGETYPE = "uImage" UBOOT_ENTRYPOINT = "30008000" diff --git a/packages/openmoko2/libjana_svn.bb b/packages/openmoko2/libjana_svn.bb index 3b18a597f6..065f380969 100644 --- a/packages/openmoko2/libjana_svn.bb +++ b/packages/openmoko2/libjana_svn.bb @@ -1,7 +1,7 @@ DESCRIPTION = "O-Hand Jana Library" DEPENDS = "libmokojournal2 gtk+ eds-dbus gconf" PV = "0.1.0+svnr${SRCREV}" -PR = "r3" +PR = "r4" inherit autotools pkgconfig lib_package @@ -16,14 +16,13 @@ do_stage() { autotools_stage_all } -PACKAGES = "libjana-ecal libjana-ecal-dbg \ - libjana-gtk libjana-gtk-dbg \ - libjana libjana-dbg libjana-dev \ -" +PACKAGES =+ "libjana-ecal libjana-ecal-dbg \ + libjana-gtk libjana-gtk-dbg \ + " -FILES_libjana-ecal = "${libdir}/libjana.so.*" +LEAD_SONAME = "libjana.so" + +FILES_libjana-ecal = "${libdir}/libjana-ecal.so.*" FILES_libjana-ecal-dbg = "${libdir}/.debug/libjana-ecal*" FILES_libjana-gtk = "${libdir}/libjana-gtk.so.* ${datadir}/jana/landwater.vmf" FILES_libjana-gtk-dbg = "${libdir}/.debug/libjana-gtk.so.*" -FILES_libjana = "${libdir}/libjana.so.*" -FILES_libjana-dbg = "${libdir}/.debug/libjana.so.*" diff --git a/packages/openmoko2/openmoko-mediaplayer2_svn.bb b/packages/openmoko2/openmoko-mediaplayer2_svn.bb index 63f12ae283..44bc640096 100644 --- a/packages/openmoko2/openmoko-mediaplayer2_svn.bb +++ b/packages/openmoko2/openmoko-mediaplayer2_svn.bb @@ -1,9 +1,9 @@ DESCRIPTION = "A media player for OpenMoko" SECTION = "openmoko/tools" DEPENDS = "libmokoui2 expat gstreamer libspiff curl" -RDEPENDS = "gst-meta-audio" +RDEPENDS = "gst-meta-audio gconf" PV = "0.1.0+svnr${SRCREV}" -PR = "r3" +PR = "r4" inherit openmoko2 @@ -20,5 +20,6 @@ if [ "x$D" != "x" ]; then exit 1 fi -gconftool-2 --makefile-install-rule ${D}${sysconfdir}/gconf/schemas/openmoko-mediaplayer.schemas > /dev/null +export GCONF_CONFIG_SOURCE=`gconftool-2 --get-default-source` +gconftool-2 --makefile-install-rule ${sysconfdir}/gconf/schemas/openmoko-mediaplayer.schemas > /dev/null } diff --git a/packages/xrestop/.mtn2git_empty b/packages/xrestop/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/xrestop/.mtn2git_empty diff --git a/packages/xrestop/xrestop_0.4.bb b/packages/xrestop/xrestop_0.4.bb new file mode 100644 index 0000000000..40396a2362 --- /dev/null +++ b/packages/xrestop/xrestop_0.4.bb @@ -0,0 +1,8 @@ +HOMEPAGE = "http://www.freedesktop.org/wiki/Software/xrestop" +LICENSE = "GPL" + +DEPENDS = "libxres libxext virtual/libx11" + +SRC_URI = "http://projects.o-hand.com/sources/xrestop/xrestop-${PV}.tar.gz" + +inherit autotools |