diff options
| -rw-r--r-- | packages/altboot/altboot_0.0.0.bb | 6 | ||||
| -rw-r--r-- | packages/altboot/files/altboot-menu/Advanced/70-install-tgz | 3 | ||||
| -rw-r--r-- | packages/altboot/files/altboot-menu/Advanced/70-setKernel | 3 | ||||
| -rw-r--r-- | packages/altboot/files/altboot-menu/Advanced/80-configure-kexec | 2 | ||||
| -rw-r--r-- | packages/altboot/files/altboot-menu/Advanced/80-copyrootfs | 2 | ||||
| -rw-r--r-- | packages/altboot/files/altboot.func | 40 | ||||
| -rwxr-xr-x | packages/altboot/files/altbootctl | 309 | ||||
| -rw-r--r-- | packages/altboot/files/altbootctl.conf | 90 | ||||
| -rw-r--r-- | packages/altboot/files/init.altboot | 136 |
9 files changed, 543 insertions, 48 deletions
diff --git a/packages/altboot/altboot_0.0.0.bb b/packages/altboot/altboot_0.0.0.bb index 1970604222..7130af5a33 100644 --- a/packages/altboot/altboot_0.0.0.bb +++ b/packages/altboot/altboot_0.0.0.bb @@ -20,7 +20,7 @@ RDEPENDS_${PN} = "${PN}-conf" ###################################################################################### -PR = "r45" +PR = "r46" ###################################################################################### @@ -35,6 +35,8 @@ SRC_URI = "file://altboot-menu \ file://altboot.func \ file://init.altboot \ file://altboot*.cfg \ + file://altbootctl.conf \ + file://altbootctl \ file://beep.raw" # S = "${WORKDIR}/altboot/" @@ -56,7 +58,9 @@ do_install() { install -m 0644 ${WORKDIR}/beep.raw ${D}/usr/share/sounds install -m 0644 ${WORKDIR}/altboot*.cfg ${D}/etc install -m 0644 ${WORKDIR}/altboot.func ${D}/etc + install -m 0644 ${WORKDIR}/altbootctl.conf ${D}/etc install -m 0755 ${WORKDIR}/init.altboot ${D}/sbin + install -m 0755 ${WORKDIR}/altbootctl ${D}/sbin install -m 0755 ${WORKDIR}/altboot-menu/*-* ${D}/etc/altboot-menu diff --git a/packages/altboot/files/altboot-menu/Advanced/70-install-tgz b/packages/altboot/files/altboot-menu/Advanced/70-install-tgz index cb8b2722d5..aca0d047c6 100644 --- a/packages/altboot/files/altboot-menu/Advanced/70-install-tgz +++ b/packages/altboot/files/altboot-menu/Advanced/70-install-tgz @@ -1,6 +1,6 @@ #!/bin/sh - M_TITLE="Install RootFS from tar.gz" +M_FLAGS="noRemember" run_module(){ test -e /etc/altboot.func && . /etc/altboot.func || die "ERROR: /etc/altboot.func not found. Check your installation!" @@ -259,5 +259,6 @@ install_rootfs_image(){ case "$1" in title) echo "$M_TITLE";; +flags) echo "$M_FLAGS";; run) run_module "$2";; esac diff --git a/packages/altboot/files/altboot-menu/Advanced/70-setKernel b/packages/altboot/files/altboot-menu/Advanced/70-setKernel index 6192232a73..50f61d034f 100644 --- a/packages/altboot/files/altboot-menu/Advanced/70-setKernel +++ b/packages/altboot/files/altboot-menu/Advanced/70-setKernel @@ -1,7 +1,8 @@ # !/bin/sh M_TITLE="Choose kernel for next boot" - +# Deprecated due to altbootctl +exit 0 # Only kernel 2.6 offers kexec support uname -r | grep -q "^2.6" || exit 0 diff --git a/packages/altboot/files/altboot-menu/Advanced/80-configure-kexec b/packages/altboot/files/altboot-menu/Advanced/80-configure-kexec index e294df683f..1b8fc6e547 100644 --- a/packages/altboot/files/altboot-menu/Advanced/80-configure-kexec +++ b/packages/altboot/files/altboot-menu/Advanced/80-configure-kexec @@ -1,6 +1,8 @@ # !/bin/sh M_TITLE="Configure kexec CMDLINE" +# Deprecated due to altbootctl +exit 0 # Only kernel 2.6 offers kexec support diff --git a/packages/altboot/files/altboot-menu/Advanced/80-copyrootfs b/packages/altboot/files/altboot-menu/Advanced/80-copyrootfs index af6bd38c1d..2d305e349f 100644 --- a/packages/altboot/files/altboot-menu/Advanced/80-copyrootfs +++ b/packages/altboot/files/altboot-menu/Advanced/80-copyrootfs @@ -1,5 +1,6 @@ # !/bin/sh M_TITLE="Copy rootfs to SD/CF" +M_FLAGS="noRemember" # Unfinished script. exit 0 @@ -317,5 +318,6 @@ run_module() { case "$1" in title) echo "$M_TITLE";; +flags) echo "$M_FLAGS";; run) run_module;; esac diff --git a/packages/altboot/files/altboot.func b/packages/altboot/files/altboot.func index 7457f66822..b3d25ff9f4 100644 --- a/packages/altboot/files/altboot.func +++ b/packages/altboot/files/altboot.func @@ -580,11 +580,15 @@ set_pref() { data_id="$2" data_value="$3" - #echo "[$1] [$2] [$3]" + #debug_echo "[$1] [$2] [$3]" #export "${data_name}"="`eval echo -e \\$${data_name} | sed "s/\#\#\#/\#\#\#\\n/g"|sed s/^\ // | sed s/^$data_id.*//`" - export "${data_name}"="`eval echo -e \\$${data_name} `$data_id##$data_value###" - + if test -z "$3" + then + debug_echo "set_pref(): WARNING, writing empty value to $data_name / $data_id! THIS WILL BREAK THINGS" + #data_value=" " + fi + export "${data_name}"="`eval echo -e \\$${data_name} `$data_id##$data_value###" } # $1: uniq name @@ -602,7 +606,32 @@ echo_pref() { dump_pref() { data_name="$1" - echo "`eval echo -e \\$${data_name} | sed "s/\#\#\#/\#\#\#\\n/g"|sed s/^\ // `" + echo "`eval echo -e ${data_name} | sed "s/\#\#\#/\#\#\#\\n/g"|sed s/^\ // `" + + #echo "-- `eval echo ${data_name}` --" + #debug_echo "[$menu_fileflags]" +} + +# $1 = name, $2 = cache_file +export_pref() { + data_name="$1" + echo "`eval echo -e ${data_name}`" > "$2" +} + +# $1 = name, $2 = cache_file +import_pref() { + data_name="$1" + data_id="$2" + + #debug_echo "[$1] [$2] [$3]" + + if test -z "$3" + then + debug_echo "set_pref(): WARNING, writing empty value to $data_name / $data_id! THIS WILL BREAK THINGS" + #data_value=" " + fi + export "${data_name}"="`cat "$2"`" + } # $1: uniq name, $2 identifier, $3 out var @@ -612,10 +641,11 @@ get_pref() { data_out="$3" data_list="`eval echo -e \\$${data_name}`" + #echo "data_list: [$data_list]" #data_value="`echo "$data_list"| sed "s/\#\#\#/\\n/g"|sed s/^\ // | grep "^$data_id##" | sed -n "s/.*\#\(.*\)$/\1/p"`" #data_value="`echo "$data_list"| sed "s/\#\#\#/\\n/g"|sed s/^\ // | sed -n "/^$data_id/s/.*\#\(.*\)$/\1/p"`" data_value="`echo "$data_list"| sed "s/\#\#\#/\\n/g" | sed -n "s/^\ //;/^$data_id\#/s/.*\#\(.*\)$/\1/p"`" - # echo "WERT: [$data_value]" + #echo "WERT: [$data_value]" export "${data_out}"="$data_value" test -n "$data_value" && return 0 diff --git a/packages/altboot/files/altbootctl b/packages/altboot/files/altbootctl new file mode 100755 index 0000000000..e09df1927b --- /dev/null +++ b/packages/altboot/files/altbootctl @@ -0,0 +1,309 @@ +#! /bin/sh +# +# Copyright Matthias Hentges <devel@hentges.net> (c) 2006 +# License: GPL (see http://www.gnu.org/licenses/gpl.txt for a copy of the license) +# +# Filename: hentges-setup.sh +# Date: 03-Jun-06 + +die() { + echo -e "$*" + exit 1 +} + + +PERMANENT_CFG="/etc/altboot-`uname -r | cut -c1-3`.cfg" +TEMPORARY_CFG="/etc/altboot-`uname -r | cut -c1-3`.cfg.next-reboot" + +CFG="$PERMANENT_CFG" +SCRIPT_CONFIG="/etc/altbootctl.conf" + +test -e "$SCRIPT_CONFIG" && . "$SCRIPT_CONFIG" || die "$SCRIPT_CONFIG not found" + +# $1= Setting, $2 = new value +set_pref() { + + if ( cat "$CFG" | grep -q "$1" ) + then + cat "$CFG" | sed "/^$1/s/\(.*\)\=\(.*\)/\1\=\"$2\"/" > ${CFG}_ + mv ${CFG}_ ${CFG} + else + echo "$1=\"$2\"" >> "${CFG}" + fi +} + +# $1= Setting +get_pref() { + n="$1" + value="`cat "${CFG}" | sed -n "/^$n/s/\(.*\)\=\\"\(.*\)\\"/\2/p"`" + #echo "cat "${CFG}" | sed -n "/^$n/s/\(.*\)\=\"\(.*\)\"/\2/p"" + test -z "$value" && die "Couldn't get value for [$n]" + echo "$value" +} + +ask_pref() { + SETTING_NAME="$1" + + SETTING_TEXT_="${SETTING_NAME}_TEXT" + SETTING_TEXT="`eval echo -e \\$${SETTING_TEXT_}`" + + SETTING_VALUES_="${SETTING_NAME}_VALUES" + SETTING_VALUES="`eval echo -e \\$${SETTING_VALUES_}`" + + SETTING_OLD_VALUE="`get_pref "$SETTING_NAME"`" + test -z "$SETTING_TEXT" -o -z "$SETTING_VALUES" && die "ask_pref: [$1] -> [$SETTING_TEXT] [$SETTING_VALUES]" + + #echo "[$1] -> $SETTING_OLD_VALUE" + #echo -e "$SETTING_TEXT" + + + if test "$SETTING_VALUES" = "<STRING>" + then + while true + do + echo -e "\nPlease enter a new value [$SETTING_OLD_VALUE]" + echo -en "Your Choice: " + read junk + + echo "" + + while true + do + echo -n "Is the new value of [$junk] correct? [Y|n] " + read junk2 + + case "$junk2" in + y|Y|"") END_LOOP=true + break ;; + *) END_LOOP=false + break ;; + esac + done + + if test "$END_LOOP" = "true" + then + SETTING_NEW_VALUE="$junk" + break + fi + + done + + else + # If it's not a string, it's a fixed list of possible settings + echo -e "\nSelect one of the following:\n" + cnt=1 + for val in $SETTING_VALUES + do + if test "$val" != "$SETTING_OLD_VALUE" + then + echo -e "\t[$cnt] $val" + else + echo -e "\t[$cnt] $val *" + SETTING_OLD_VALUE_NUM="$cnt" + fi + let cnt=$cnt+1 + done + + echo "" + while true + do + echo -en "Your choice [$SETTING_OLD_VALUE_NUM]: " + read junk + + if test -n "$junk" + then + cnt=1 ; SETTING_NEW_VALUE="" + for val in $SETTING_VALUES + do + if test "$junk" = "$cnt" + then + SETTING_NEW_VALUE="$val" + break + fi + + let cnt=$cnt+1 + done + else + SETTING_NEW_VALUE="$SETTING_OLD_VALUE" + fi + + test -n "$SETTING_NEW_VALUE" && break + done + + fi + + + if test "$SETTING_NEW_VALUE" != "$SETTING_OLD_VALUE" + then + set_pref "$SETTING_NAME" "$SETTING_NEW_VALUE" + echo "Changed $SETTING_NAME to $SETTING_NEW_VALUE" + else + echo "$SETTING_NAME remains unchanged" + fi + echo -e "\n" +} + +build_menu() { + for setting in $TARGETS + do + # SETTING_MENUPOS contains $setting_MENUPOS + SETTING_MENUPOS_="${setting}_MENUPOS" + SETTING_MENUPOS="`eval echo -e \\$${SETTING_MENUPOS_}`" + + # Store all entries in variables named after the menu name + MENU_NAME="SUBMENU_${SETTING_MENUPOS}" + export "${MENU_NAME}"="`eval echo -e \\$${MENU_NAME} ` $setting" + + + echo "$AVAILABLE_MENUES" | grep -q "$SETTING_MENUPOS" || AVAILABLE_MENUES="$SETTING_MENUPOS $AVAILABLE_MENUES" + + done + + #echo "[$AVAILABLE_MENUES]" + + while true + do + echo -e "\nSelect a menu:\n" + cnt=1 + for menu in $AVAILABLE_MENUES Exit + do + MENU_NAME="SUBMENU_$menu" + echo -e "\t[$cnt] $menu" + let cnt=$cnt+1 + done + + echo "" + + while true + do + echo -n "Your Choice: " + read junk + + cnt=1 ; GET_MENU="" + for menu in $AVAILABLE_MENUES Exit + do + if test "$cnt" = "$junk" + then + GET_MENU="$menu" + break + fi + let cnt=$cnt+1 + done + + if test "$GET_MENU" = "Exit" + then + EXIT_PROG=true + break + else + EXIT_PROG=false + fi + + if test -n "$GET_MENU" + then + show_menu "$menu" + break + fi + done + test "$EXIT_PROG" = true && break + done +} + +show_menu() { + MENU_NAME="SUBMENU_$1" + + + while true + do + echo -e "\nEntries in this menu:\n" + cnt=1 + for entry in `eval echo -e \\$${MENU_NAME}` Back + do + MENU_NAME_TEXT="${entry}_TEXT" || MENU_NAME_TEXT="${entry}" + + test "$entry" != Back && tmp_="`eval echo -e \\$${MENU_NAME_TEXT}`" || tmp_="Back" + + echo -e "\t[$cnt] $tmp_" + let cnt=$cnt+1 + done + + echo "" + + while true + do + echo -en "Your Choice: " + read junk + + cnt=1 ; GET_ENTRY="" + for entry in `eval echo -e \\$${MENU_NAME}` Back + do + if test "$cnt" = "$junk" + then + GET_ENTRY="$entry" + break + fi + let cnt=$cnt+1 + done + + if test "$GET_ENTRY" = "Back" + then + EXIT_MENU=true + break + else + EXIT_MENU=false + fi + + + # At this point the user has selected a menuitem != "Back" + if test -n "$GET_ENTRY" + then + select_config + ask_pref "$GET_ENTRY" + break + fi + done + + test "$EXIT_MENU" = true && break + done +} + +select_config() { + echo -e "\nChange this setting only for the next reboot or permanently?\n" + + echo -e "Select one of the following:\n" + + echo -e "\t[1] Only for the next reboot" + echo -e "\t[2] Permanently" + echo "" + + while true + do + echo -en "Your Choice: " + read junk + + case "$junk" in + 2) CFG="$PERMANENT_CFG" + break ;; + 1) CFG="$TEMPORARY_CFG" + break ;; + esac + done + + # Supress error message about missing config + ! test -e "$CFG" && touch "$CFG" + +} + +go() { + build_menu + + exit 0 + for setting in $TARGETS + do + ask_pref "$setting" + done + +} + + +! test -e "$CFG" && die "[$CFG] not found, exiting" +go diff --git a/packages/altboot/files/altbootctl.conf b/packages/altboot/files/altbootctl.conf new file mode 100644 index 0000000000..0a358c7e2d --- /dev/null +++ b/packages/altboot/files/altbootctl.conf @@ -0,0 +1,90 @@ +#! /bin/sh +# +# Copyright Matthias Hentges <devel@hentges.net> (c) 2006 +# License: GPL (see http://www.gnu.org/licenses/gpl.txt for a copy of the license) +# +# Filename: hentges-setup.conf +# Date: 04-Jun-06 + + +TARGETS="REMEMBER_LAST_SELECTION ENABLE_ALTBOOT FSCK_IMAGES TIMEOUT INIT_RUNLEVEL NO_GUI_RL \ + USB_HOST_AVAILABLE USB_NETWORKING_AVAILABLE ASK_PW_ON_BOOT SD_DEVICE SD_KERNEL_MODULE \ + IMAGE_PATH IMAGE_TYPE ENABLE_IMAGECONF USB_STORAGE_MODULES USB_STORAGE_PARTITION \ + USB_STORAGE_WAIT SD_MOUNTPOINT" + + +REMEMBER_LAST_SELECTION_VALUES="yes no" +REMEMBER_LAST_SELECTION_TEXT="Remember the last selected menu item for next boot" +REMEMBER_LAST_SELECTION_MENUPOS="Core" + +ENABLE_ALTBOOT_VALUES="yes no" +ENABLE_ALTBOOT_TEXT="Enable or disable the altboot boot-manager" +ENABLE_ALTBOOT_MENUPOS="Core" + +TIMEOUT_VALUES="<STRING>" +TIMEOUT_TEXT="Altboot boot-menu timeout in seconds" +TIMEOUT_MENUPOS="Core" + +INIT_RUNLEVEL_VALUES="<STRING>" +INIT_RUNLEVEL_TEXT="Default runlevel" +INIT_RUNLEVEL_MENUPOS="Core" + +NO_GUI_RL_VALUES="<STRING>" +NO_GUI_RL_TEXT="GUI-less runlevel" +NO_GUI_RL_MENUPOS="Core" + +ENABLE_DEBUG_VALUES="yes no" +ENABLE_DEBUG_TEXT="Enable debug output" +ENABLE_DEBUG_MENUPOS="Core" + +FSCK_IMAGES_VALUES="yes no" +FSCK_IMAGES_TEXT="Automatically fsck loop-images" +FSCK_IMAGES_MENUPOS="LoopImages" + +IMAGE_PATH_VALUES="<STRING>" +IMAGE_PATH_TEXT="Subdirectory for loop-files" +IMAGE_PATH_MENUPOS="LoopImages" + +IMAGE_TYPE_VALUES="<STRING>" +IMAGE_TYPE_TEXT="Image FS type" +IMAGE_TYPE_MENUPOS="LoopImages" + +ENABLE_IMAGECONF_VALUES="yes no" +ENABLE_IMAGECONF_TEXT="Configure new loop-images on 1st boot" +ENABLE_IMAGECONF_MENUPOS="LoopImages" + +USB_HOST_AVAILABLE_VALUES="yes no" +USB_HOST_AVAILABLE_TEXT="Device supports full USB *HOST* mode" +USB_HOST_AVAILABLE_MENUPOS="USB" + +USB_NETWORKING_AVAILABLE_VALUES="yes no" +USB_NETWORKING_AVAILABLE_TEXT="USB networking is available" +USB_NETWORKING_AVAILABLE_MENUPOS="USB" + +USB_STORAGE_MODULES_VALUES="<STRING>" +USB_STORAGE_MODULES_TEXT="Kernelmodules required for USB" +USB_STORAGE_MODULES_MENUPOS="USB" + +USB_STORAGE_PARTITION_VALUES="<STRING>" +USB_STORAGE_PARTITION_TEXT="USB storage device file" +USB_STORAGE_PARTITION_MENUPOS="USB" + +USB_STORAGE_WAIT_VALUES="<STRING>" +USB_STORAGE_WAIT_TEXT="Wait x seconds before mount USB storage" +USB_STORAGE_WAIT_MENUPOS="USB" + +ASK_PW_ON_BOOT_VALUES="yes no" +ASK_PW_ON_BOOT_TEXT="Alway ask altboot password on boot" +ASK_PW_ON_BOOT_MENUPOS="Core" + +SD_DEVICE_VALUES="<STRING>" +SD_DEVICE_TEXT="The device-file for the SD card" +SD_DEVICE_MENUPOS="SD_MMC" + +SD_KERNEL_MODULE_VALUES="<STRING>" +SD_KERNEL_MODULE_TEXT="Kernelmodule required for SD operation" +SD_KERNEL_MODULE_MENUPOS="SD_MMC" + +SD_MOUNTPOINT_VALUES="<STRING>" +SD_MOUNTPOINT_TEXT="Mointpoint for the SD card" +SD_MOUNTPOINT_MENUPOS="SD_MMC" diff --git a/packages/altboot/files/init.altboot b/packages/altboot/files/init.altboot index 3bffc2bec5..e09739c8fa 100644 --- a/packages/altboot/files/init.altboot +++ b/packages/altboot/files/init.altboot @@ -28,6 +28,12 @@ esac test -e "$ALTBOOT_CFG_FILE" && . "$ALTBOOT_CFG_FILE" || echo "WARNING: No $ALTBOOT_CFG_FILE found! Check your installation of Altboot!" > "$OUT_TTY" +if test -e "${ALTBOOT_CFG_FILE}.next-reboot" +then + . "${ALTBOOT_CFG_FILE}.next-reboot" + rm "${ALTBOOT_CFG_FILE}.next-reboot" +fi + C_RED="\033[31m" C_YELLOW="\033[33m" C_BLUE="\033[34m" @@ -66,7 +72,7 @@ show_menu() { m_entry="" - # Build "m_entry" for scripts in /etc/altboot-menu + cd $1 cnt=0 ; reset_pref "menu_filelist" @@ -75,6 +81,8 @@ show_menu() { if ! test -d "$1/$file" then M_TITLE="`$1/$file title`" + FLAGS="`$1/$file flags`" + if ! test -z "$M_TITLE" then let cnt=$cnt+1 @@ -83,6 +91,7 @@ show_menu() { #m_entry="`echo -e "$m_entry\n$cnt:$file\n"`" set_pref "menu_filelist" "$cnt" "$file" + test -n "$FLAGS" && set_pref "menu_fileflags" "$cnt" "$FLAGS" echo -e "\t\t[$cnt] $M_TITLE" fi M_TITLE="" @@ -101,9 +110,12 @@ show_menu() { let cnt=$cnt+1 # Keep a list of existing "modules" together with an index number # This sure is ugly, but Busybox sh doesn't do arrays.... - #m_entry="`echo -e "$m_entry\n$cnt:$dir:DIR\n"`" set_pref "menu_filelist" "$cnt" "$dir:DIR" + + # Set noRemember flag for directories + set_pref "menu_fileflags" "$cnt" "noRemember" + echo -e "\t\t[$cnt] $M_TITLE" OLD_PWD="$PWD" @@ -113,15 +125,16 @@ show_menu() { if ! test -d "$1/$dir/$file" then M_TITLE="`$1/$dir/$file title`" + FLAGS="`$1/$dir/$file flags`" + if ! test -z "$M_TITLE" then let cnt=$cnt+1 # Keep a list of existing "modules" together with an index number # This sure is ugly, but Busybox sh doesn't do arrays.... - #m_entry="`echo -e "$m_entry\n$cnt:$dir/$file\n"`" set_pref "menu_filelist" "$cnt" "$dir/$file" - #echo -e "\t\t[$cnt] $M_TITLE" + test -n "$FLAGS" && set_pref "menu_fileflags" "$cnt" "$FLAGS" fi M_TITLE="" fi @@ -133,9 +146,11 @@ show_menu() { fi done - #echo_pref "menu_filelist" echo "" +# export_pref "$menu_filelist" /tmp/menu_filelist.cache +# export_pref "$menu_fileflags" /tmp/menu_fileflags.cache + } # This function is used to display the content of directories below @@ -167,6 +182,33 @@ show_sub_menu() { } +get_kbd_ints(){ + if ( uname -r | grep -q ^2.6 ) + then + if test -z "$KBD_INT" + then + # find out how the keyboard is called + for kbd in Spitzkbd corgikbd locomokbd tosakbd + do + if ( cat /proc/interrupts | grep -q "$kbd" ) + then + debug_echo "run_timer(): Using [$kbd] as keyboard interrupt" + KBD_INT="$kbd" + break + fi + done + fi + key_ints="`cat /proc/interrupts | grep "$KBD_INT"`" + #debug_echo "run_timer(): key_ints = [$key_ints]" + else + KBD_INT="$kbd" + debug_echo "\nrun_timer(): Using [keyboard] as keyboard interrupt in kernel-2.4 mode" + key_ints="`cat /proc/interrupts | grep keyboard | awk '{print $2}'`" + fi + + test -z "$KBD_INT" && debug_echo "Couldn't read keyboard ints!" +} + # Shows the timer and sets $launch_altboot to yes if a keypress was detected run_timer() { if test "$TIMEOUT" != 0 @@ -174,15 +216,10 @@ run_timer() { mount -t proc proc /proc >/dev/null 2>&1 - case "`uname -r`" in - 2.4*) key_ints="`cat /proc/interrupts | grep keyboard | awk '{print $2}'`";; - 2.6*) key_ints="`cat /proc/interrupts | grep Spitzkbd`" - test -z "$key_ints" && key_ints="`cat /proc/interrupts | grep -i corgikbd`" - test -z "$key_ints" && key_ints="`cat /proc/interrupts | grep -i locomokbd`" - test -z "$key_ints" && key_ints="`cat /proc/interrupts | grep -i tosakbd`";; - esac - - test -z "$key_ints" && debug_echo "Couldn't read keyboard ints!" + get_kbd_ints + kbd_ints_old="$key_ints" + + #debug_echo "run_timer() old:`echo $key_ints | md5sum`" stty -echo <"$OUT_TTY" >"$OUT_TTY" 2>&1 echo -en "\n\nPlease press any key to launch altboot." > "$OUT_TTY" @@ -193,15 +230,11 @@ run_timer() { while test "$cnt" != "$TIMEOUT" do sleep 1 - case "`uname -r`" in - 2.4*) key_ints_now="`cat /proc/interrupts | grep keyboard | awk '{print $2}'`";; - 2.6*) key_ints_now="`cat /proc/interrupts | grep Spitzkbd`" - test -z "$key_ints_now" && key_ints_now="`cat /proc/interrupts | grep -i corgikbd`" - test -z "$key_ints_now" && key_ints_now="`cat /proc/interrupts | grep -i locomokbd`" - test -z "$key_ints_now" && key_ints_now="`cat /proc/interrupts | grep -i tosakbd`";; - esac - if test "$key_ints_now" != "$key_ints" -o -z "$key_ints_now" + get_kbd_ints + kbd_ints_new="$key_ints" + + if test "$kbd_ints_new" != "$kbd_ints_old" -o -z "$kbd_ints_new" then launch_altboot=yes stty echo <"$OUT_TTY" >"$OUT_TTY" 2>&1 @@ -223,6 +256,26 @@ run_timer() { fi } +# $1 = ID +parse_module_flags() { + if test -n "$1" + then + # Each module can set "flags" to influence handling of the module + get_pref "menu_fileflags" "$1" flags + + test -n "$flags" && debug_echo "parse_module_flags(): [$1] has flags [$flags]" + + for flag in $flags + do + case "$flag" in + noRemember) REMEMBER_LAST_SELECTION=no;; + esac + done + else + debug_echo "parse_module_flags(): Empty \$1" + fi +} + # This function launches the selected menu item / script # $1: Directory containing the scripts for the menu-items launch_selection() { @@ -235,8 +288,8 @@ launch_selection() { type="`echo "$file_" | sed -n "s/\(.*\)\:\(.*\)/\2/p"`" file="`echo "$file_" | sed -n "s/\(.*\)\:\(.*\)/\1/p"`" test -z "$file" && file="$file_" - - #echo "[$file_]: [$type] / [$file] ($junk)" + + #echo "[$file_]: [$type] : [$flags] / [$file] ($junk)" # The selected menu-item points to a directory if test "$type" = DIR @@ -291,26 +344,30 @@ wait_for_input() { # This filters other chars the user may have used - #echo "junk: [$junk]" - junk="`echo "$junk" | sed "s/[a-zA-Z]//g"`" - #echo "junk: [$junk]" + junk="`echo "$junk" | sed "s/[a-zA-Z]//g"`" if test "$junk" -lt "$cnt" -o "$junk" -eq "$cnt" - then - if test ! -z "$junk" + then + if test ! -z "$junk" then - # Don't remount rw if the drive is already mounted rw - # Only helpful for testing / debugging - if test "`mount|sed -n "/\/dev\/root/s/.*(\(.*\))/\1/p"`" != "rw" - then - mount -o remount,rw / >/dev/null 2>&1 - echo "$junk" > /etc/altboot.conf - mount -o remount,ro / >/dev/null 2>&1 - else - echo "$junk" > /etc/altboot.conf + parse_module_flags "$junk" + + if test "$REMEMBER_LAST_SELECTION" != no + then + # Don't remount rw if the drive is already mounted rw + # Only helpful for testing / debugging + if test "`mount|sed -n "/\/dev\/root/s/.*(\(.*\))/\1/p"`" != "rw" + then + mount -o remount,rw / >/dev/null 2>&1 + echo "$junk" > /etc/altboot.conf + mount -o remount,ro / >/dev/null 2>&1 + else + echo "$junk" > /etc/altboot.conf + fi fi else junk="$last_selection" + parse_module_flags "$junk" break fi break @@ -367,7 +424,7 @@ else echo "" >"$OUT_TTY" - + # launch_altboot is set to "yes" by run_timer when the user presses the button during the timeout if test "$launch_altboot" != yes then # last_selection is the previously selected menu item by the user @@ -380,7 +437,6 @@ else show_menu /etc/altboot-menu >/dev/null junk="$last_selection" launch_selection /etc/altboot-menu >"$OUT_TTY" - fi # Anything after this point will never be reached if $launch_altboot != yes |