diff options
55 files changed, 1803 insertions, 2483 deletions
diff --git a/classes/rootfs_deb.bbclass b/classes/rootfs_deb.bbclass index 67fa661308..32b1c57f1a 100644 --- a/classes/rootfs_deb.bbclass +++ b/classes/rootfs_deb.bbclass @@ -53,19 +53,21 @@ fakeroot rootfs_deb_do_rootfs () { _getflag () { cat ${IMAGE_ROOTFS}/var/dpkg/status | sed -n -e "/^Package: $2\$/{n; s/Status: install ok .*/$1/; p}" } - - if [ ! -z "${LINGUAS_INSTALL}" ]; then - apt-get install glibc-localedata-i18n --force-yes --allow-unauthenticated - if [ $? -ne 0 ]; then - exit $? - fi - for i in ${LINGUAS_INSTALL}; do - apt-get install $i --force-yes --allow-unauthenticated - if [ $? -ne 0 ]; then - exit $? - fi - done - fi + + if [ x${TARGET_OS} = "xlinux" ] || [ x${TARGET_OS} = "xlinux-gnueabi" ] ; then + if [ ! -z "${LINGUAS_INSTALL}" ]; then + apt-get install glibc-localedata-i18n --force-yes --allow-unauthenticated + if [ $? -ne 0 ]; then + exit $? + fi + for i in ${LINGUAS_INSTALL}; do + apt-get install $i --force-yes --allow-unauthenticated + if [ $? -ne 0 ]; then + exit $? + fi + done + fi + fi if [ ! -z "${PACKAGE_INSTALL}" ]; then for i in ${PACKAGE_INSTALL}; do diff --git a/classes/rootfs_ipk.bbclass b/classes/rootfs_ipk.bbclass index 53b0162eac..9a58777ade 100644 --- a/classes/rootfs_ipk.bbclass +++ b/classes/rootfs_ipk.bbclass @@ -52,15 +52,21 @@ fakeroot rootfs_ipk_do_rootfs () { fi done ipkg-cl ${IPKG_ARGS} update - if [ ! -z "${LINGUAS_INSTALL}" ]; then - ipkg-cl ${IPKG_ARGS} install glibc-localedata-i18n - for i in ${LINGUAS_INSTALL}; do - ipkg-cl ${IPKG_ARGS} install $i - done - fi - if [ ! -z "${PACKAGE_INSTALL}" ]; then - ipkg-cl ${IPKG_ARGS} install ${PACKAGE_INSTALL} - fi + + # Uclibc builds don't provide this stuff... + # + if [ x${TARGET_OS} = "xlinux" ] || [ x${TARGET_OS} = "xlinux-gnueabi" ] ; then + if [ ! -z "${LINGUAS_INSTALL}" ]; then + ipkg-cl ${IPKG_ARGS} install glibc-localedata-i18n + for i in ${LINGUAS_INSTALL}; do + ipkg-cl ${IPKG_ARGS} install $i + done + fi + fi + if [ ! -z "${PACKAGE_INSTALL}" ]; then + ipkg-cl ${IPKG_ARGS} install ${PACKAGE_INSTALL} + fi + export D=${IMAGE_ROOTFS} export OFFLINE_ROOT=${IMAGE_ROOTFS} diff --git a/conf/distro/angstrom-2007.1.conf b/conf/distro/angstrom-2007.1.conf index d0e732bcc9..6d5d84a794 100644 --- a/conf/distro/angstrom-2007.1.conf +++ b/conf/distro/angstrom-2007.1.conf @@ -220,8 +220,6 @@ PREFERRED_VERSION_linux-handhelds-2.6 ?= "2.6.21-hh12" RDEPENDS_kernel-base_hx4700 = "" RDEPENDS_kernel-base_htcuniversal = "" -PREFERRED_VERSION_linux_at91sam9263ek ?= "2.6.20" - # Needed for crappy ipaqs with broken hostap in the kernel PREFERRED_VERSION_hostap-modules ?= "0.4.7" PREFERRED_VERSION_hostap-utils ?= "0.4.7" @@ -249,6 +247,8 @@ PREFERRED_VERSION_osb-jscore = "0.5.2+svn${SRCDATE}" PREFERRED_VERSION_osb-nrcit = "0.5.2+svn${SRCDATE}" PREFERRED_VERSION_osb-nrcore = "0.5.2+svn${SRCDATE}" +PREFERRED_PROVIDER_avahi = "avahi" + #Small machines prefer kdrive, but we might ship full Xorg in other images PREFERRED_PROVIDER_virtual/xserver ?= "xserver-kdrive" PREFERRED_PROVIDER_xserver ?= "xserver-kdrive" diff --git a/conf/distro/include/angstrom.inc b/conf/distro/include/angstrom.inc index 3b859a9d04..7d364a5ee0 100644 --- a/conf/distro/include/angstrom.inc +++ b/conf/distro/include/angstrom.inc @@ -210,6 +210,53 @@ DEPLOY_DIR_IMAGE = "${DEPLOY_DIR}/images/${MACHINE}" # Angstrom *always* has some form of release config, so error out if someone thinks he knows better DISTRO_CHECK := "${@bb.data.getVar("DISTRO_VERSION",d,1) or bb.fatal('Remove this line or set a dummy DISTRO_VERSION if you really want to build an unversioned distro')}" + +# Configuration for tinderbox, so people only need: +# INHERIT += "tinderclient" +# in their local.conf + +#Name of the client +TINDER_MACHINE = "${MACHINE}-${ANGSTROM_MODE}-build-image" + +# Which lof file to write to, which tree to report to +TINDER_LOG = "${TMPDIR}/tinder.log" +TINDER_TREE = "Angstrom" + +# HTTP posting +TINDER_HOST ?= "ewi546.ewi.utwente.nl" +TINDER_URL ?= "/tinderbox" + +# Which branch do we build +TINDER_BRANCH = "org.openembedded.dev" + +## Clobbing +## 0 for rebuilding everything from scratch +## 1 for incremental builds +TINDER_CLOBBER = "1" + +## Do a report at all +TINDER_REPORT = "1" + +# Configuration for seppuku autobuilder, people only need to put: +# INHERIT += "seppuku" +# SEPPUKU_USER = "your_bugzilla@user.id" +# SEPPUKU_PASS = "your_bugzilla_password" +# in their local.conf + +# seppuku bbclass +SEPPUKU_LOGIN = "http://bugs.openembedded.org/query.cgi?" +SEPPUKU_QUERY = "http://bugs.openembedded.org/buglist.cgi?" +SEPPUKU_NEWREPORT = "http://bugs.openembedded.org/post_bug.cgi?bug_file_loc=http%3A%2F%2F&version=Angstrom&priority=P2&bug_severity=normal&op_sys=Linux&rep_platform=Other&" +SEPPUKU_ADDCOMMENT = "http://bugs.openembedded.org/process_bug.cgi?bug_file_loc=http%3A%2F%2F&version=Angstrom&priority=P2&bug_severity=normal&op_sys=Linux&rep_platform=Other&"SEPPUKU_ATTACHMENT = "http://bugs.openembedded.org/attachment.cgi?" +SEPPUKU_AUTOBUILD = "1" + +SEPPUKU_PRODUCT = "Openembedded" +SEPPUKU_COMPONENT = "build" + + + + + # We want images supporting the following features (for task-base) DISTRO_FEATURES = "nfs smbfs wifi ppp alsa bluetooth ext2 irda pcmcia usbgadget usbhost pci" DISTRO_FEATURES_nslu2 = "nfs smbfs alsa bluetooth ext2 usbhost pci" diff --git a/conf/machine/gumstix-connex.conf b/conf/machine/gumstix-connex.conf index 5110e86aff..a431762d0a 100644 --- a/conf/machine/gumstix-connex.conf +++ b/conf/machine/gumstix-connex.conf @@ -1,2 +1,6 @@ require conf/machine/include/gumstix.inc +MACHINE_FEATURES += " usbgadget " + +GUMSTIX_400MHZ = "y" + diff --git a/conf/machine/gumstix-verdex.conf b/conf/machine/gumstix-verdex.conf index f08e3bafad..ab24552646 100644 --- a/conf/machine/gumstix-verdex.conf +++ b/conf/machine/gumstix-verdex.conf @@ -2,3 +2,5 @@ require conf/machine/include/gumstix.inc PACKAGE_EXTRA_ARCHS += " iwmmxt " +MACHINE_FEATURES += " usbhost " + diff --git a/conf/machine/include/gumstix.inc b/conf/machine/include/gumstix.inc index 9d51cdcead..c271940f63 100644 --- a/conf/machine/include/gumstix.inc +++ b/conf/machine/include/gumstix.inc @@ -13,17 +13,13 @@ module_autoload_mmc_block = "mmc_block" module_autoload_gumstix_gadget = "gumstix_gadget" module_autoload_g_ether = "g_ether" -OLDEST_KERNEL = "2.6.15" - UBOOT_ENTRYPOINT = "a0008000" #Assume people have some gumstix extension boards -MACHINE_FEATURES = "kernel26 alsa ext2 usbhost usbgadget bluetooth" +MACHINE_FEATURES = "kernel26 alsa ext2 bluetooth" EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=0x20000 --squash" -GUMSTIX_400MHZ = "y" - MACHINE_EXTRA_RRECOMMENDS = "kernel-module-unix \ kernel-module-rtc-core \ kernel-module-rtc-dev \ diff --git a/conf/machine/include/tune-arm1136jf-s.conf b/conf/machine/include/tune-arm1136jf-s.conf index 68316f36bf..a69df825c0 100644 --- a/conf/machine/include/tune-arm1136jf-s.conf +++ b/conf/machine/include/tune-arm1136jf-s.conf @@ -1,2 +1,3 @@ TARGET_CC_ARCH = "-march=armv6j -mtune=arm1136jf-s -mfpu=vfp -mfloat-abi=softfp" -PACKAGE_ARCH = "armv6"
\ No newline at end of file +FEED_ARCH = "armv6" +PACKAGE_ARCH = "armv6" diff --git a/conf/machine/include/tune-arm920t.conf b/conf/machine/include/tune-arm920t.conf index 373bf46727..b142d3325a 100644 --- a/conf/machine/include/tune-arm920t.conf +++ b/conf/machine/include/tune-arm920t.conf @@ -1,3 +1,4 @@ +FEED_ARCH = "armv4t" PACKAGE_ARCH = "armv4t" TARGET_CC_ARCH = "-march=armv4t -mtune=arm920t" diff --git a/conf/machine/include/tune-arm926ejs.conf b/conf/machine/include/tune-arm926ejs.conf index 31fe8868ca..c3e8d7aefc 100644 --- a/conf/machine/include/tune-arm926ejs.conf +++ b/conf/machine/include/tune-arm926ejs.conf @@ -1,3 +1,5 @@ +FEED_ARCH = "armv5te" + # For gcc 3.x you need: #TARGET_CC_ARCH = "-march=armv5te -mtune=arm926ejs" # For gcc 4.x you need: diff --git a/conf/machine/include/tune-xscale.conf b/conf/machine/include/tune-xscale.conf index 1d212946e4..f14aee9aed 100644 --- a/conf/machine/include/tune-xscale.conf +++ b/conf/machine/include/tune-xscale.conf @@ -1,3 +1,5 @@ +FEED_ARCH = "armv5te" + TARGET_CC_ARCH = "-march=armv5te -mtune=xscale" TARGET_CC_KERNEL_ARCH = "-march=armv5te -mtune=xscale" PACKAGE_ARCH = "${@['armv5teb', 'armv5te'][bb.data.getVar('SITEINFO_ENDIANESS', d, 1) == 'le']}" diff --git a/conf/machine/omap5912osk.conf b/conf/machine/omap5912osk.conf index 946a619d3f..091d511118 100644 --- a/conf/machine/omap5912osk.conf +++ b/conf/machine/omap5912osk.conf @@ -3,13 +3,10 @@ #@DESCRIPTION: Machine configuration for the OMAP Starter Kit with a 5912 processor TARGET_ARCH = "arm" -PACKAGE_EXTRA_ARCHS = "armv5te" - -HOTPLUG = "udev" +PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5e armv5te" PREFERRED_PROVIDER_xserver = "xserver-kdrive" PREFERRED_PROVIDER_virtual/kernel = "linux-omap1" -PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross" # PREFERRED_VERSION_u-boot = "1.1.6" @@ -30,24 +27,3 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-module-ide-cs \ require conf/machine/include/tune-arm926ejs.conf -# old modules setup - partially need to be added into MACHINE_EXTRA_RRECOMMENDS - -# PCMCIA Modules -##BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-pcmcia-core kernel-module-pcmcia" -##BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-omap-cf" - -# IDE modules -#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-ide-cs kernel-module-ide-disk" -#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-ide-core" - -# DOS and VFAT modules -#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-msdos kernel-module-nls-iso8859-1" -#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-nls-cp437 kernel-module-nls-base" -#BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-vfat kernel-module-fat" - -# Video er LCD Driver -##BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-fb kernel-module-cfbimgblt kernel-module-cfbcopyarea" -##BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-cfbfillrect kernel-module-omapfb kernel-module-softcursor" - -# DSP Interface -##BOOTSTRAP_EXTRA_RDEPENDS += "kernel-module-dsp" diff --git a/packages/avahi/avahi-python_0.6.21.bb b/packages/avahi/avahi-python_0.6.21.bb index 8eaac073ac..eea8295ac8 100644 --- a/packages/avahi/avahi-python_0.6.21.bb +++ b/packages/avahi/avahi-python_0.6.21.bb @@ -11,4 +11,8 @@ SRC_URI += "file://dbus-pre-1.1.1-support.patch;patch=1 \ file://configure-check-pymod.patch;patch=1" S = "${WORKDIR}/avahi-${PV}" +RDEPENDS_avahi-discover = "python-avahi python-pygtk" +RDEPENDS_python-avahi = "python-dbus" +PACKAGES =+ "python-avahi" + AVAHI_PYTHON = "--enable-python" diff --git a/packages/avahi/avahi.inc b/packages/avahi/avahi.inc index 991d282a3e..3864dc5135 100644 --- a/packages/avahi/avahi.inc +++ b/packages/avahi/avahi.inc @@ -12,8 +12,6 @@ DEPENDS = "expat libdaemon dbus glib-2.0" RRECOMMENDS_avahi-daemon_append_linux = "libnss-mdns" RDEPENDS_avahi-daemon = "sysvinit-pidof update-rc.d" RDEPENDS_avahi-autoipd = "update-rc.d" -RDEPENDS_avahi-discover = "python-avahi python-pygtk" -RDEPENDS_python-avahi = "python-dbus" SRC_URI = "http://avahi.org/download/avahi-${PV}.tar.gz \ file://00avahi-autoipd file://99avahi-autoipd" @@ -28,7 +26,7 @@ EXTRA_OECONF = "--with-distro=debian --disable-gdbm ${AVAHI_GTK} --disable-mono AVAHI_PYTHON = "--disable-python" AVAHI_GTK = "--disable-gtk" -PACKAGES =+ "avahi-daemon avahi-discover libavahi-common libavahi-core libavahi-client avahi-dnsconfd libavahi-glib libavahi-ui avahi-discover-standalone avahi-autoipd avahi-utils python-avahi" +PACKAGES =+ "avahi-daemon avahi-discover libavahi-common libavahi-core libavahi-client avahi-dnsconfd libavahi-glib libavahi-ui avahi-discover-standalone avahi-autoipd avahi-utils" FILES_libavahi-common = "${libdir}/libavahi-common.so.*" FILES_libavahi-core = "${libdir}/libavahi-core.so.*" diff --git a/packages/base-files/base-files/gumstix-connex/.mtn2git_empty b/packages/base-files/base-files/gumstix-connex/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/base-files/base-files/gumstix-connex/.mtn2git_empty diff --git a/packages/base-files/base-files/gumstix-connex/fstab b/packages/base-files/base-files/gumstix-connex/fstab new file mode 100644 index 0000000000..418f9978d4 --- /dev/null +++ b/packages/base-files/base-files/gumstix-connex/fstab @@ -0,0 +1,11 @@ +# fstab for gumstix-connex + +rootfs / auto defaults 1 1 +proc /proc proc defaults 0 0 +sysfs /sys sysfs defaults 0 0 +tmpfs /dev tmpfs defaults 0 0 +devpts /dev/pts devpts gid=5,mode=620 0 0 +tmpfs /dev/shm tmpfs mode=0777 0 0 +tmpfs /var/volatile tmpfs mode=0755 0 0 +tmpfs /media/ram tmpfs defaults 0 0 + diff --git a/packages/base-files/base-files/gumstix-verdex/.mtn2git_empty b/packages/base-files/base-files/gumstix-verdex/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/base-files/base-files/gumstix-verdex/.mtn2git_empty diff --git a/packages/base-files/base-files/gumstix-verdex/fstab b/packages/base-files/base-files/gumstix-verdex/fstab new file mode 100644 index 0000000000..9b5f00c4a7 --- /dev/null +++ b/packages/base-files/base-files/gumstix-verdex/fstab @@ -0,0 +1,11 @@ +# fstab for gumstix-verdex + +rootfs / auto defaults 1 1 +proc /proc proc defaults 0 0 +sysfs /sys sysfs defaults 0 0 +tmpfs /dev tmpfs defaults 0 0 +devpts /dev/pts devpts gid=5,mode=620 0 0 +tmpfs /dev/shm tmpfs mode=0777 0 0 +tmpfs /var/volatile tmpfs mode=0755 0 0 +tmpfs /media/ram tmpfs defaults 0 0 + diff --git a/packages/base-files/base-files/omap5912osk/fstab b/packages/base-files/base-files/omap5912osk/fstab index 687fd00227..5e881f77f9 100644 --- a/packages/base-files/base-files/omap5912osk/fstab +++ b/packages/base-files/base-files/omap5912osk/fstab @@ -2,8 +2,9 @@ rootfs / auto defaults 1 1 proc /proc proc defaults 0 0 -sysfs /sysfs sysfs defaults 0 0 +sysfs /sys sysfs defaults 0 0 tmpfs /dev tmpfs defaults 0 0 +devpts /dev/pts devpts gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs mode=0777 0 0 tmpfs /var/volatile tmpfs mode=0755 0 0 tmpfs /media/ram tmpfs defaults 0 0 diff --git a/packages/linux/linux-gta01/defconfig-2.6.21.3-fic-gta01 b/packages/linux/linux-gta01/defconfig-2.6.21.3-fic-gta01 deleted file mode 100644 index a8a4dc6aa7..0000000000 --- a/packages/linux/linux-gta01/defconfig-2.6.21.3-fic-gta01 +++ /dev/null @@ -1,1857 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.3 -# Mon Jun 11 18:32:32 2007 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -CONFIG_MMU=y -CONFIG_NO_IOPORT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ZONE_DMA=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="-moko10" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=m -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=m -# CONFIG_DEFAULT_AS is not set -CONFIG_DEFAULT_DEADLINE=y -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="deadline" - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -CONFIG_ARCH_S3C2410=y -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -CONFIG_PLAT_S3C24XX=y -CONFIG_CPU_S3C244X=y -# CONFIG_S3C2410_BOOT_WATCHDOG is not set -CONFIG_S3C2410_BOOT_ERROR_RESET=y -CONFIG_S3C2410_PM_DEBUG=y -# CONFIG_S3C2410_PM_CHECK is not set -CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 -CONFIG_S3C2410_DMA=y -# CONFIG_S3C2410_DMA_DEBUG is not set -CONFIG_MACH_SMDK=y - -# -# S3C2400 Machines -# -CONFIG_CPU_S3C2410=y -CONFIG_CPU_S3C2410_DMA=y -CONFIG_S3C2410_PM=y -CONFIG_S3C2410_GPIO=y -CONFIG_S3C2410_CLOCK=y - -# -# S3C2410 Machines -# -# CONFIG_ARCH_SMDK2410 is not set -# CONFIG_ARCH_H1940 is not set -# CONFIG_MACH_N30 is not set -# CONFIG_ARCH_BAST is not set -# CONFIG_MACH_OTOM is not set -# CONFIG_MACH_AML_M5900 is not set -# CONFIG_MACH_VR1000 is not set -CONFIG_MACH_QT2410=y -CONFIG_MACH_NEO1973_GTA01=y - -# -# S3C2412 Machines -# -# CONFIG_MACH_SMDK2413 is not set -# CONFIG_MACH_VSTMS is not set -CONFIG_CPU_S3C2440=y -CONFIG_S3C2440_DMA=y - -# -# S3C2440 Machines -# -# CONFIG_MACH_ANUBIS is not set -# CONFIG_MACH_OSIRIS is not set -# CONFIG_MACH_RX3715 is not set -CONFIG_ARCH_S3C2440=y -# CONFIG_MACH_NEXCODER_2440 is not set -CONFIG_SMDK2440_CPU2440=y -CONFIG_MACH_HXD8=y -# CONFIG_MACH_NEO1973_GTA02 is not set - -# -# S3C2442 Machines -# -# CONFIG_SMDK2440_CPU2442 is not set - -# -# S3C2443 Machines -# -# CONFIG_MACH_SMDK2443 is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4T=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_PREEMPT=y -CONFIG_NO_IDLE_HZ=y -CONFIG_HZ=200 -# CONFIG_AEABI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySAC0,115200n8 ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off debug" -# CONFIG_XIP_KERNEL is not set -CONFIG_KEXEC=y - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_FPE_NWFPE is not set -CONFIG_FPE_FASTFPE=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -CONFIG_PM=y -CONFIG_PM_LEGACY=y -CONFIG_PM_DEBUG=y -CONFIG_DISABLE_CONSOLE_SUSPEND=y -# CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_APM_EMULATION=y - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=m -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=m -CONFIG_NET_KEY_MIGRATE=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_MULTIPATH is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -# CONFIG_NET_IPGRE_BROADCAST is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -# CONFIG_IPV6_MIP6 is not set -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -CONFIG_IPV6_TUNNEL=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -# CONFIG_NF_CONNTRACK_AMANDA is not set -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -# CONFIG_IP_NF_MATCH_RECENT is not set -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -# CONFIG_NF_NAT_AMANDA is not set -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_NF_NAT_SIP=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_LOG=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -# CONFIG_IP6_NF_RAW is not set - -# -# Bridge: Netfilter Configuration -# -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_ULOG=m - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -CONFIG_BRIDGE=y -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -CONFIG_LLC=y -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_CLK_JIFFIES is not set -CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y -# CONFIG_NET_SCH_CLK_CPU is not set - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_INGRESS=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_ROUTE=y -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_CLS_U32_PERF=y -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_ESTIMATOR=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y -# CONFIG_BT_HCIUART is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIVHCI is not set -# CONFIG_IEEE80211 is not set -CONFIG_FIB_RULES=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_AFS_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set - -# -# RAM/ROM/Flash chip drivers -# -# CONFIG_MTD_CFI is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_DATAFLASH is not set -# CONFIG_MTD_M25P80 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_S3C2410=y -CONFIG_MTD_NAND_S3C2410_BBT=y -# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -CONFIG_MTD_NAND_S3C2410_HWECC=y -CONFIG_MTD_NAND_S3C2410_CLKSTOP=y -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_UB=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -CONFIG_MD=y -# CONFIG_BLK_DEV_MD is not set -CONFIG_BLK_DEV_DM=m -# CONFIG_DM_DEBUG is not set -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -# CONFIG_DM_MIRROR is not set -# CONFIG_DM_ZERO is not set -# CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=m -# CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set -CONFIG_NET_PCI=y -CONFIG_CS89x0=m - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=480 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=m - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GTA01=y -CONFIG_KEYBOARD_QT2410=y -CONFIG_INPUT_MOUSE=y -# CONFIG_MOUSE_PS2 is not set -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_TOUCHSCREEN_ADS7846 is not set -CONFIG_TOUCHSCREEN_S3C2410=y -# CONFIG_TOUCHSCREEN_S3C2410_DEBUG is not set -# CONFIG_TOUCHSCREEN_GUNZE is not set -# CONFIG_TOUCHSCREEN_ELO is not set -# CONFIG_TOUCHSCREEN_MTOUCH is not set -# CONFIG_TOUCHSCREEN_MK712 is not set -# CONFIG_TOUCHSCREEN_PENMOUNT is not set -# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set -# CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -# CONFIG_SERIO_SERPORT is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_NR_TTY_DEVICES=4 -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_S3C2410=y -CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_S3C2410_WATCHDOG=m - -# -# USB-based Watchdog Cards -# -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TS0710_MUX is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_S3C2410=y -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -CONFIG_SENSORS_PCF50606=y -# CONFIG_SENSORS_PCF50633 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -CONFIG_SENSORS_TSL256X=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_BITBANG=y -CONFIG_SPI_S3C24XX=y -CONFIG_SPI_S3C24XX_GPIO=y - -# -# SPI Protocol Masters -# -# CONFIG_SPI_AT25 is not set -CONFIG_SPI_SLAVE_JBT6K74=y - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM70 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multifunction device drivers -# -# CONFIG_MFD_SM501 is not set - -# -# LED devices -# -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y - -# -# LED drivers -# -CONFIG_LEDS_S3C24XX=m -CONFIG_LEDS_GTA01=y - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GTA01=y -CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB_DDC is not set -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set - -# -# Frame buffer hardware drivers -# -# CONFIG_FB_S1D13XXX is not set -CONFIG_FB_S3C2410=y -CONFIG_FB_S3C2410_DEBUG=y -# CONFIG_FB_GLAMO is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set -CONFIG_FONTS=y -# CONFIG_FONT_8x8 is not set -# CONFIG_FONT_8x16 is not set -CONFIG_FONT_6x11=y -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set - -# -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# - -# -# USB devices -# -CONFIG_SND_USB_AUDIO=m - -# -# SoC audio support -# -CONFIG_SND_SOC=y - -# -# SoC Platforms -# - -# -# SoC Audio for the Atmel AT91 -# - -# -# SoC Audio for the Freescale i.MX -# - -# -# SoC Audio for the Intel PXA2xx -# - -# -# SoC Audio for the Samsung S3C24XX -# -CONFIG_SND_S3C24XX_SOC=m -CONFIG_SND_S3C24XX_SOC_I2S=m -CONFIG_SND_S3C24XX_SOC_SMDK2440=m -CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m -CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_UDA1380=m - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_DPCM=y -CONFIG_USB_STORAGE_USBAT=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_USB_STORAGE_ALAUDA=y -CONFIG_USB_STORAGE_KARMA=y -CONFIG_USB_LIBUSUAL=y - -# -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -CONFIG_USB_GTCO=m - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_AIRPRIME=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP2101=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_FUNSOFT=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_HP4X=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -# CONFIG_USB_SERIAL_DEBUG is not set -CONFIG_USB_EZUSB=y - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -CONFIG_USB_BERRY_CHARGE=m -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGET_DEBUG_FILES is not set -CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -CONFIG_USB_GADGET_S3C2410=y -CONFIG_USB_S3C2410=y -# CONFIG_USB_S3C2410_DEBUG is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set -# CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y -CONFIG_USB_ETH_RNDIS=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_MIDI_GADGET is not set - -# -# MMC/SD Card support -# -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_S3C=m - -# -# Real Time Clock -# -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DEBUG=y - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -CONFIG_RTC_DRV_S3C=m -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_MAX6902 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# File systems -# -CONFIG_EXT2_FS=m -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -# CONFIG_ZISOFS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_YAFFS1=y -# CONFIG_YAFFS_DOES_ECC is not set -CONFIG_YAFFS_YAFFS2=y -CONFIG_YAFFS_AUTO_YAFFS2=y -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10 -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -# CONFIG_ROOT_NFS is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_WEAK_PW_HASH=y -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m -CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -CONFIG_NLS_ISO8859_1=m -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -# CONFIG_DLM is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set -CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_DEBUG_USER is not set -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C2410_PORT=y -CONFIG_DEBUG_S3C2410_UART=0 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y diff --git a/packages/linux/linux-gta01/defconfig-2.6.21.5-fic-gta01 b/packages/linux/linux-gta01/defconfig-2.6.22.5-fic-gta01 index a21b757a94..920cec6c7b 100644 --- a/packages/linux/linux-gta01/defconfig-2.6.21.5-fic-gta01 +++ b/packages/linux/linux-gta01/defconfig-2.6.22.5-fic-gta01 @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21.3 -# Mon Jun 11 18:32:32 2007 +# Linux kernel version: 2.6.22.1 +# Thu Jul 26 22:01:38 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_MMU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -33,7 +36,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # -CONFIG_LOCALVERSION="-moko10" +CONFIG_LOCALVERSION="-moko11" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y @@ -45,6 +48,7 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -63,14 +67,19 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set # # Loadable module support @@ -120,13 +129,14 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set @@ -135,6 +145,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set CONFIG_PLAT_S3C24XX=y CONFIG_CPU_S3C244X=y @@ -173,6 +184,7 @@ CONFIG_MACH_NEO1973_GTA01=y # S3C2412 Machines # # CONFIG_MACH_SMDK2413 is not set +# CONFIG_MACH_SMDK2412 is not set # CONFIG_MACH_VSTMS is not set CONFIG_CPU_S3C2440=y CONFIG_S3C2440_DMA=y @@ -187,7 +199,7 @@ CONFIG_ARCH_S3C2440=y # CONFIG_MACH_NEXCODER_2440 is not set CONFIG_SMDK2440_CPU2440=y CONFIG_MACH_HXD8=y -# CONFIG_MACH_NEO1973_GTA02 is not set +CONFIG_MACH_NEO1973_GTA02=y # # S3C2442 Machines @@ -225,6 +237,7 @@ CONFIG_ARM_THUMB=y # # Bus support # +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support @@ -234,6 +247,7 @@ CONFIG_ARM_THUMB=y # # Kernel Features # +# CONFIG_TICK_ONESHOT is not set CONFIG_PREEMPT=y CONFIG_NO_IDLE_HZ=y CONFIG_HZ=200 @@ -267,8 +281,8 @@ CONFIG_KEXEC=y # # At least one emulation must be selected # -# CONFIG_FPE_NWFPE is not set -CONFIG_FPE_FASTFPE=y +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_FASTFPE is not set # # Userspace binary formats @@ -296,7 +310,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -339,14 +352,11 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m @@ -372,8 +382,6 @@ CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set CONFIG_NF_CONNTRACK=m CONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y @@ -510,20 +518,8 @@ CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_ULOG=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_BRIDGE=y @@ -543,9 +539,6 @@ CONFIG_LLC=y # CONFIG_NET_SCHED=y CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_CLK_JIFFIES is not set -CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -609,10 +602,19 @@ CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set + +# # Device Drivers # @@ -630,10 +632,6 @@ CONFIG_FW_LOADER=m # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -672,7 +670,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -696,13 +693,10 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y CONFIG_MTD_NAND_S3C2410_BBT=y @@ -711,11 +705,13 @@ CONFIG_MTD_NAND_S3C2410_HWECC=y CONFIG_MTD_NAND_S3C2410_CLKSTOP=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ONENAND is not set # -# OneNAND Flash Device Drivers +# UBI - Unsorted block images # -# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_UBI is not set # # Parallel port support @@ -741,10 +737,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# # CONFIG_IDE is not set # @@ -774,6 +766,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -789,10 +782,6 @@ CONFIG_SCSI_SCAN_ASYNC=y # # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set # @@ -807,19 +796,7 @@ CONFIG_DM_SNAPSHOT=m # CONFIG_DM_MIRROR is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# +# CONFIG_DM_DELAY is not set # # Network device support @@ -829,10 +806,6 @@ CONFIG_NETDEVICES=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# PHY device support -# # CONFIG_PHYLIB is not set # @@ -844,27 +817,40 @@ CONFIG_MII=m # CONFIG_DM9000 is not set CONFIG_NET_PCI=y CONFIG_CS89x0=m +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# USB Network Adapters # +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET_MII=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m # CONFIG_WAN is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y @@ -892,6 +878,7 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -921,8 +908,10 @@ CONFIG_KEYBOARD_QT2410=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_ADS7846 is not set CONFIG_TOUCHSCREEN_S3C2410=y @@ -935,6 +924,7 @@ CONFIG_TOUCHSCREEN_S3C2410=y # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_INPUT_MISC is not set # @@ -974,10 +964,6 @@ CONFIG_UNIX98_PTYS=y # IPMI # # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -993,7 +979,6 @@ CONFIG_S3C2410_WATCHDOG=m # CONFIG_USBPCWATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -1002,11 +987,8 @@ CONFIG_S3C2410_WATCHDOG=m # # CONFIG_TCG_TPM is not set # CONFIG_TS0710_MUX is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # @@ -1019,11 +1001,13 @@ CONFIG_I2C_CHARDEV=y # # I2C Hardware Bus support # +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set CONFIG_I2C_S3C2410=y +# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_TINY_USB is not set # # Miscellaneous I2C Chip support @@ -1032,7 +1016,7 @@ CONFIG_I2C_S3C2410=y # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set CONFIG_SENSORS_PCF50606=y -# CONFIG_SENSORS_PCF50633 is not set +CONFIG_SENSORS_PCF50633=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -1061,19 +1045,17 @@ CONFIG_SPI_S3C24XX_GPIO=y # SPI Protocol Masters # # CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set CONFIG_SPI_SLAVE_JBT6K74=y # # Dallas's 1-wire bus # # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -1101,6 +1083,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1148,11 +1131,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # @@ -1162,12 +1142,23 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_GTA01=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1180,7 +1171,10 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_S3C2410=y CONFIG_FB_S3C2410_DEBUG=y -# CONFIG_FB_GLAMO is not set +CONFIG_GLAMO=y +CONFIG_FB_GLAMO=y +CONFIG_GLAMO_SPI_GPIO=y +CONFIG_FB_GLAMO_SPI=y # CONFIG_FB_VIRTUAL is not set # @@ -1201,14 +1195,10 @@ CONFIG_FONT_6x11=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set +CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1250,37 +1240,20 @@ CONFIG_SND_VERBOSE_PROCFS=y # USB devices # CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_CAIAQ is not set # -# SoC audio support +# System on Chip audio support # CONFIG_SND_SOC=y - -# -# SoC Platforms -# - -# -# SoC Audio for the Atmel AT91 -# - -# -# SoC Audio for the Freescale i.MX -# - -# -# SoC Audio for the Intel PXA2xx -# - -# -# SoC Audio for the Samsung S3C24XX -# CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_S3C24XX_SOC_I2S=m -CONFIG_SND_S3C24XX_SOC_SMDK2440=m CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753=m + +# +# SoC Audio support for SuperH +# CONFIG_SND_SOC_WM8753=m -CONFIG_SND_SOC_UDA1380=m # # Open Sound System @@ -1294,6 +1267,20 @@ CONFIG_HID=y # CONFIG_HID_DEBUG is not set # +# USB Input Devices +# +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set + +# # USB support # CONFIG_USB_ARCH_HAS_HCD=y @@ -1306,6 +1293,7 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set @@ -1347,63 +1335,10 @@ CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_LIBUSUAL=y # -# USB Input Devices -# -CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -CONFIG_USB_GTCO=m - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET_MII=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_USB_NET_ZAURUS=m CONFIG_USB_MON=y # @@ -1499,6 +1434,7 @@ CONFIG_USB_IOWARRIOR=m CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set @@ -1517,21 +1453,27 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -CONFIG_MMC_S3C=m + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_S3C=y # # Real Time Clock # CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_DEBUG=y # @@ -1541,27 +1483,41 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# RTC drivers +# I2C RTC drivers # -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set + +# +# SPI RTC drivers +# # CONFIG_RTC_DRV_RS5C348 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -CONFIG_RTC_DRV_S3C=m -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_V3020 is not set # +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_S3C=m + +# # File systems # CONFIG_EXT2_FS=m @@ -1674,6 +1630,7 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1759,7 +1716,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1769,6 +1725,8 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1816,6 +1774,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -1845,6 +1804,7 @@ CONFIG_CRYPTO_TEST=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y @@ -1855,3 +1815,4 @@ CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/packages/linux/linux-gta01_2.6.21.5.bb b/packages/linux/linux-gta01_2.6.21.5.bb deleted file mode 100644 index 03bb1f9129..0000000000 --- a/packages/linux/linux-gta01_2.6.21.5.bb +++ /dev/null @@ -1,10 +0,0 @@ -require linux-gta01.inc - -SRC_URI += "svn://svn.openmoko.org/branches/src/target/kernel/2.6.21.x;module=patches;proto=http" -SRC_URI += "file://fix-EVIOCGRAB-semantics.patch;patch=1" - -MOKOR = "moko10" -PR = "${MOKOR}-r4" - -VANILLA_VERSION = "2.6.21.5" - diff --git a/packages/linux/linux-gta01_2.6.22.5.bb b/packages/linux/linux-gta01_2.6.22.5.bb new file mode 100644 index 0000000000..4b970f9811 --- /dev/null +++ b/packages/linux/linux-gta01_2.6.22.5.bb @@ -0,0 +1,10 @@ +require linux-gta01.inc + +SRC_URI += "svn://svn.openmoko.org/trunk/src/target/kernel;module=patches;proto=http" +#SRC_URI += "file://fix-EVIOCGRAB-semantics.patch;patch=1" + +MOKOR = "moko11" +PR = "${MOKOR}-r1" + +VANILLA_VERSION = "2.6.22.5" + diff --git a/packages/linux/linux-handhelds-2.6/h2200/defconfig b/packages/linux/linux-handhelds-2.6/h2200/defconfig index 287919d099..85a7ae0e6e 100644 --- a/packages/linux/linux-handhelds-2.6/h2200/defconfig +++ b/packages/linux/linux-handhelds-2.6/h2200/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-hh11 -# Wed Jul 11 07:31:37 2007 +# Linux kernel version: 2.6.21-hh12 +# Mon Aug 27 19:05:20 2007 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -295,7 +295,7 @@ CONFIG_FPE_NWFPE=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m # # Power management options @@ -319,6 +319,10 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -337,7 +341,7 @@ CONFIG_IP_PNP=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -351,9 +355,22 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -373,6 +390,12 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_ARPTABLES is not set # +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +# CONFIG_IP6_NF_QUEUE is not set +# CONFIG_IP6_NF_IPTABLES is not set + +# # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set @@ -480,7 +503,14 @@ CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIBLUECARD is not set # CONFIG_BT_HCIBTUART is not set # CONFIG_BT_HCIVHCI is not set -# CONFIG_IEEE80211 is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +# CONFIG_IEEE80211_CRYPT_TKIP is not set +CONFIG_IEEE80211_SOFTMAC=m +# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set +CONFIG_WIRELESS_EXT=y # # Device Drivers @@ -672,16 +702,36 @@ CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set +CONFIG_TUN=m # # PHY device support # +CONFIG_PHYLIB=m + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_LXT_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_BROADCOM_PHY=m +CONFIG_FIXED_PHY=m +CONFIG_FIXED_MII_10_FDX=y +CONFIG_FIXED_MII_100_FDX=y # # Ethernet (10 or 100Mbit) # -# CONFIG_NET_ETHERNET is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +CONFIG_SMC91X=m +CONFIG_DM9000=m +CONFIG_SMC911X=m # # Ethernet (1000 Mbit) @@ -698,7 +748,47 @@ CONFIG_NETDEVICES=y # # Wireless LAN (non-hamradio) # -# CONFIG_NET_RADIO is not set +CONFIG_NET_RADIO=y +CONFIG_NET_WIRELESS_RTNETLINK=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +CONFIG_ATMEL=m + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_PCMCIA_WL3501=m +CONFIG_USB_ZD1201=m +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set +CONFIG_HOSTAP_CS=m +CONFIG_ZD1211RW=m +# CONFIG_ZD1211RW_DEBUG is not set +CONFIG_ACX=m +CONFIG_ACX_USB=y +# CONFIG_ACX_MEM is not set +# CONFIG_ACX_CS is not set +CONFIG_NET_WIRELESS=y # # PCMCIA network device support @@ -717,7 +807,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set +CONFIG_PPPOE=m # CONFIG_SLIP is not set CONFIG_SLHC=m # CONFIG_SHAPER is not set @@ -1139,8 +1229,8 @@ CONFIG_USB_SL811_CS=m # # USB Device Class drivers # -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1186,12 +1276,28 @@ CONFIG_USB_HID=m # # USB Network Adapters # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET_MII=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m CONFIG_USB_MON=y # @@ -1201,7 +1307,58 @@ CONFIG_USB_MON=y # # USB Serial Converter support # -# CONFIG_USB_SERIAL is not set +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_AIRPRIME=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP2101=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_DEBUG=m +CONFIG_USB_EZUSB=y # # USB Miscellaneous drivers @@ -1537,7 +1694,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set diff --git a/packages/linux/linux/alix/defconfig b/packages/linux/linux/alix/defconfig index 6d4ac6a735..9cffb883a9 100644 --- a/packages/linux/linux/alix/defconfig +++ b/packages/linux/linux/alix/defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22 -# Fri Aug 24 14:54:56 2007 +# Linux kernel version: 2.6.23-rc3 +# Mon Aug 27 14:49:39 2007 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y @@ -24,27 +25,22 @@ CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set @@ -58,6 +54,7 @@ CONFIG_SYSCTL=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -78,24 +75,17 @@ CONFIG_SLAB=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -166,7 +156,7 @@ CONFIG_X86_POPAD_OK=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_TSC=y -CONFIG_X86_MINIMUM_CPU_MODEL=4 +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y # CONFIG_PREEMPT_NONE is not set @@ -177,15 +167,13 @@ CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCE_NONFATAL is not set -# CONFIG_X86_MCE_P4THERMAL is not set +# CONFIG_X86_MCE is not set CONFIG_VM86=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set -# CONFIG_X86_REBOOTFIXUPS is not set +CONFIG_X86_REBOOTFIXUPS=y # CONFIG_MICROCODE is not set -# CONFIG_X86_MSR is not set +CONFIG_X86_MSR=m # CONFIG_X86_CPUID is not set # @@ -194,10 +182,12 @@ CONFIG_VM86=y # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set +# CONFIG_DMIID is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_X86_PAE is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -212,9 +202,11 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y # CONFIG_MATH_EMULATION is not set -CONFIG_MTRR=y +# CONFIG_MTRR is not set # CONFIG_EFI is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set @@ -234,74 +226,31 @@ CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set -# CONFIG_SOFTWARE_SUSPEND is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +# CONFIG_SUSPEND is not set +# CONFIG_HIBERNATION is not set CONFIG_ACPI=y -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SLEEP_PROC_FS=y -# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set # CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_THERMAL=m +# CONFIG_ACPI_PROCESSOR is not set # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 -CONFIG_ACPI_DEBUG=y +# CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # CONFIG_ACPI_CONTAINER is not set # CONFIG_ACPI_SBS is not set -# CONFIG_APM is not set # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# CPUFreq processor drivers -# -CONFIG_X86_ACPI_CPUFREQ=m -# CONFIG_X86_POWERNOW_K6 is not set -# CONFIG_X86_POWERNOW_K7 is not set -# CONFIG_X86_POWERNOW_K8 is not set -CONFIG_X86_GX_SUSPMOD=m -# CONFIG_X86_SPEEDSTEP_CENTRINO is not set -# CONFIG_X86_SPEEDSTEP_ICH is not set -# CONFIG_X86_SPEEDSTEP_SMI is not set -# CONFIG_X86_P4_CLOCKMOD is not set -# CONFIG_X86_CPUFREQ_NFORCE2 is not set -# CONFIG_X86_LONGRUN is not set -# CONFIG_X86_LONGHAUL is not set -# CONFIG_X86_E_POWERSAVER is not set - -# -# shared options -# -# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set -# CONFIG_X86_SPEEDSTEP_LIB is not set +# CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -317,11 +266,13 @@ CONFIG_PCI_MMCONFIG=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set +# CONFIG_PCI_DEBUG is not set # CONFIG_HT_IRQ is not set CONFIG_ISA_DMA_API=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set +CONFIG_GEODE_MFGPT_TIMER=y # # PCCARD (PCMCIA/CardBus) support @@ -371,18 +322,131 @@ CONFIG_SYN_COOKIES=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set -# CONFIG_BRIDGE is not set +CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -395,6 +459,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y +CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -427,9 +493,10 @@ CONFIG_BT_HCIUSB_SCO=y # # Wireless # -# CONFIG_CFG80211 is not set +CONFIG_CFG80211=m CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set +CONFIG_MAC80211=m +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m @@ -438,6 +505,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m CONFIG_IEEE80211_SOFTMAC=m # CONFIG_IEEE80211_SOFTMAC_DEBUG is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -449,17 +517,11 @@ CONFIG_IEEE80211_SOFTMAC=m CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set @@ -469,10 +531,6 @@ CONFIG_PARPORT_PC=m CONFIG_PARPORT_AX88796=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y - -# -# Plug and Play support -# CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set @@ -480,10 +538,7 @@ CONFIG_PNP=y # Protocols # CONFIG_PNPACPI=y - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set @@ -499,16 +554,7 @@ CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_IBM_ASM is not set -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_SONY_LAPTOP is not set -# CONFIG_THINKPAD_ACPI is not set +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -516,6 +562,7 @@ CONFIG_BLK_DEV_LOOP=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -526,9 +573,9 @@ CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set # @@ -546,50 +593,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y @@ -646,10 +651,6 @@ CONFIG_PATA_AMD=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -665,38 +666,24 @@ CONFIG_PATA_AMD=y # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y @@ -717,28 +704,12 @@ CONFIG_NET_PCI=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set -CONFIG_VIA_RHINE=m +CONFIG_VIA_RHINE=y CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set +# CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -755,6 +726,7 @@ CONFIG_WLAN_80211=y # CONFIG_ATMEL is not set # CONFIG_PRISM54 is not set CONFIG_USB_ZD1201=m +# CONFIG_RTL8187 is not set # CONFIG_HOSTAP is not set CONFIG_BCM43XX=m CONFIG_BCM43XX_DEBUG=y @@ -802,15 +774,7 @@ CONFIG_USB_ARMLINUX=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -843,13 +807,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -894,6 +852,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=2 @@ -911,12 +870,48 @@ CONFIG_UNIX98_PTYS=y # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_IBMASR is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_ITCO_WDT is not set +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +# CONFIG_60XX_WDT is not set +# CONFIG_SBC8360_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_SMSC37B787_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83697HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_W83977F_WDT is not set +# CONFIG_MACHZ_WDT is not set +# CONFIG_SBC_EPX_C3_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set @@ -931,17 +926,13 @@ CONFIG_RTC=y # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set -# CONFIG_NSC_GPIO is not set +CONFIG_NSC_GPIO=m CONFIG_CS5535_GPIO=m # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=m - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y @@ -978,6 +969,7 @@ CONFIG_SCx200_ACB=m # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set @@ -989,11 +981,13 @@ CONFIG_SCx200_ACB=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -1004,14 +998,12 @@ CONFIG_SCx200_ACB=m # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1040,14 +1032,17 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1084,6 +1079,7 @@ CONFIG_SENSORS_W83627HF=m # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set @@ -1137,8 +1133,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_GX=y -# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set +CONFIG_FB_GEODE_LX=y +# CONFIG_FB_GEODE_GX is not set # CONFIG_FB_GEODE_GX1 is not set # CONFIG_FB_VIRTUAL is not set @@ -1150,6 +1146,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -1162,7 +1159,10 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set -# CONFIG_LOGO is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # # Sound @@ -1216,6 +1216,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set CONFIG_SND_CS5535AUDIO=m # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1273,38 +1274,30 @@ CONFIG_SND_CS5535AUDIO=m # CONFIG_SND_SOC is not set # -# Open Sound System +# SoC Audio support for SuperH # -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m # -# HID Devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # # USB Input Devices # -CONFIG_USB_HID=m +CONFIG_USB_HID=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set - -# -# USB support -# +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=m +CONFIG_USB=y # CONFIG_USB_DEBUG is not set # @@ -1314,23 +1307,24 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # -CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set -CONFIG_USB_OHCI_HCD=m +CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -1408,33 +1402,9 @@ CONFIG_USB_STORAGE=m # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# # CONFIG_EDAC is not set - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1461,6 +1431,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1471,8 +1442,10 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1491,16 +1464,14 @@ CONFIG_RTC_DRV_CMOS=y # # DMA Devices # +# CONFIG_AUXDISPLAY is not set +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set # -# Auxiliary Display support -# -# CONFIG_KS0108 is not set - -# -# Virtualization +# Userspace I/O # -# CONFIG_KVM is not set +# CONFIG_UIO is not set # # File systems @@ -1622,7 +1593,6 @@ CONFIG_CIFS_EXPERIMENTAL=y CONFIG_CODA_FS=m # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1678,10 +1648,7 @@ CONFIG_NLS_UTF8=y # Distributed Lock Manager # # CONFIG_DLM is not set - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set # CONFIG_KPROBES is not set @@ -1695,9 +1662,38 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_FRAME_POINTER is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set CONFIG_EARLY_PRINTK=y +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUG_RODATA is not set +CONFIG_4KSTACKS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y @@ -1707,10 +1703,6 @@ CONFIG_DOUBLEFAULT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ABLKCIPHER=m @@ -1753,10 +1745,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_TEST=m - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_PADLOCK is not set CONFIG_CRYPTO_DEV_GEODE=y @@ -1768,10 +1757,15 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/packages/linux/linux/alix/geode-mfgpt-clock-event-device-support.patch b/packages/linux/linux/alix/geode-mfgpt-clock-event-device-support.patch new file mode 100644 index 0000000000..6f0b10a0bd --- /dev/null +++ b/packages/linux/linux/alix/geode-mfgpt-clock-event-device-support.patch @@ -0,0 +1,237 @@ +From: Andres Salomon <dilinger@queued.net> + +Add support for an MFGPT clock event device; this allows us to use MFGPTs as +the basis for high-resolution timers. + +Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> +Signed-off-by: Andres Salomon <dilinger@debian.org> +Cc: Andi Kleen <ak@suse.de> +Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> +Cc: john stultz <johnstul@us.ibm.com> +Cc: Thomas Gleixner <tglx@linutronix.de> +Cc: Ingo Molnar <mingo@elte.hu> +Signed-off-by: Andrew Morton <akpm@linux-foundation.org> +--- + + Documentation/kernel-parameters.txt | 4 + arch/i386/Kconfig | 10 + + arch/i386/kernel/mfgpt.c | 165 ++++++++++++++++++++++++++ + 3 files changed, 179 insertions(+) + +--- linux-2.6.22.orig/Documentation/kernel-parameters.txt ++++ linux-2.6.22/Documentation/kernel-parameters.txt +@@ -1012,6 +1012,10 @@ + meye.*= [HW] Set MotionEye Camera parameters + See Documentation/video4linux/meye.txt. + ++ mfgpt_irq= [IA-32] Specify the IRQ to use for the ++ Multi-Function General Purpose Timers on AMD Geode ++ platforms. ++ + mga= [HW,DRM] + + migration_cost= +--- linux-2.6.22.orig/arch/i386/Kconfig ++++ linux-2.6.22/arch/i386/Kconfig +@@ -1190,6 +1190,16 @@ + processor goes idle (as is done by the scheduler). The + other workaround is idle=poll boot option. + ++config GEODE_MFGPT_TIMER ++ bool "Geode Multi-Function General Purpose Timer (MFGPT) events" ++ depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS ++ default y ++ help ++ This driver provides a clock event source based on the MFGPT ++ timer(s) in the CS5535 and CS5536 companion chip for the geode. ++ MFGPTs have a better resolution and max interval than the ++ generic PIT, and are suitable for use as high-res timers. ++ + config K8_NB + def_bool y + depends on AGP_AMD64 +--- linux-2.6.22.orig/arch/i386/kernel/mfgpt.c ++++ linux-2.6.22/arch/i386/kernel/mfgpt.c +@@ -48,6 +48,12 @@ + #define MFGPT_HZ (32000 / MFGPT_DIVISOR) + #define MFGPT_PERIODIC (MFGPT_HZ / HZ) + ++#ifdef CONFIG_GEODE_MFGPT_TIMER ++static int __init mfgpt_timer_setup(void); ++#else ++#define mfgpt_timer_setup() (0) ++#endif ++ + /* Allow for disabling of MFGPTs */ + static int disable; + static int __init mfgpt_disable(char *s) +@@ -82,6 +88,9 @@ + } + } + ++ /* set up clock event device, if desired */ ++ i = mfgpt_timer_setup(); ++ + return count; + } + +@@ -197,3 +206,159 @@ + return -1; + } + EXPORT_SYMBOL(geode_mfgpt_alloc_timer); ++ ++#ifdef CONFIG_GEODE_MFGPT_TIMER ++ ++/* ++ * The MFPGT timers on the CS5536 provide us with suitable timers to use ++ * as clock event sources - not as good as a HPET or APIC, but certainly ++ * better then the PIT. This isn't a general purpose MFGPT driver, but ++ * a simplified one designed specifically to act as a clock event source. ++ * For full details about the MFGPT, please consult the CS5536 data sheet. ++ */ ++ ++#include <linux/clocksource.h> ++#include <linux/clockchips.h> ++ ++static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; ++static u16 mfgpt_event_clock; ++ ++static int irq = 7; ++static int __init mfgpt_setup(char *str) ++{ ++ get_option(&str, &irq); ++ return 1; ++} ++__setup("mfgpt_irq=", mfgpt_setup); ++ ++static inline void mfgpt_disable_timer(u16 clock) ++{ ++ u16 val = geode_mfgpt_read(clock, MFGPT_REG_SETUP); ++ geode_mfgpt_write(clock, MFGPT_REG_SETUP, val & ~MFGPT_SETUP_CNTEN); ++} ++ ++static int mfgpt_next_event(unsigned long, struct clock_event_device *); ++static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *); ++ ++static struct clock_event_device mfgpt_clockevent = { ++ .name = "mfgpt-timer", ++ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, ++ .set_mode = mfgpt_set_mode, ++ .set_next_event = mfgpt_next_event, ++ .rating = 250, ++ .cpumask = CPU_MASK_ALL, ++ .shift = 32 ++}; ++ ++static inline void mfgpt_start_timer(u16 clock, u16 delta) ++{ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta); ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); ++ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, ++ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); ++} ++ ++static void mfgpt_set_mode(enum clock_event_mode mode, ++ struct clock_event_device *evt) ++{ ++ mfgpt_disable_timer(mfgpt_event_clock); ++ ++ if (mode == CLOCK_EVT_MODE_PERIODIC) ++ mfgpt_start_timer(mfgpt_event_clock, MFGPT_PERIODIC); ++ ++ mfgpt_tick_mode = mode; ++} ++ ++static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt) ++{ ++ mfgpt_start_timer(mfgpt_event_clock, delta); ++ return 0; ++} ++ ++/* Assume (foolishly?), that this interrupt was due to our tick */ ++ ++static irqreturn_t mfgpt_tick(int irq, void *dev_id) ++{ ++ if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN) ++ return IRQ_HANDLED; ++ ++ /* Turn off the clock */ ++ mfgpt_disable_timer(mfgpt_event_clock); ++ ++ /* Clear the counter */ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0); ++ ++ /* Restart the clock in periodic mode */ ++ ++ if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) { ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, ++ MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2); ++ } ++ ++ mfgpt_clockevent.event_handler(&mfgpt_clockevent); ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction mfgptirq = { ++ .handler = mfgpt_tick, ++ .flags = IRQF_DISABLED | IRQF_NOBALANCING, ++ .mask = CPU_MASK_NONE, ++ .name = "mfgpt-timer" ++}; ++ ++static int __init mfgpt_timer_setup(void) ++{ ++ int timer, ret; ++ u16 val; ++ ++ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING, ++ THIS_MODULE); ++ if (timer < 0) { ++ printk(KERN_ERR "mfgpt-timer: Could not allocate a MFPGT " ++ "timer\n"); ++ return -ENODEV; ++ } ++ ++ mfgpt_event_clock = timer; ++ /* Set the clock scale and enable the event mode for CMP2 */ ++ val = MFGPT_SCALE | (3 << 8); ++ ++ geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val); ++ ++ /* Set up the IRQ on the MFGPT side */ ++ if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { ++ printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); ++ return -EIO; ++ } ++ ++ /* And register it with the kernel */ ++ ret = setup_irq(irq, &mfgptirq); ++ ++ if (ret) { ++ printk(KERN_ERR "mfgpt-timer: Unable to set up the " ++ "interrupt.\n"); ++ goto err; ++ } ++ ++ /* Set up the clock event */ ++ mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, 32); ++ mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF, ++ &mfgpt_clockevent); ++ mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, ++ &mfgpt_clockevent); ++ ++ printk(KERN_INFO "mfgpt-timer: registering the MFGT timer as a " ++ "clock event.\n"); ++ clockevents_register_device(&mfgpt_clockevent); ++ ++ return 0; ++ ++err: ++ geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); ++ printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock " ++ "source\n"); ++ return -EIO; ++} ++ ++#endif diff --git a/packages/linux/linux/alix/geode-mfgpt-support-for-geode-class-machines.patch b/packages/linux/linux/alix/geode-mfgpt-support-for-geode-class-machines.patch new file mode 100644 index 0000000000..533412c483 --- /dev/null +++ b/packages/linux/linux/alix/geode-mfgpt-support-for-geode-class-machines.patch @@ -0,0 +1,311 @@ +From: Andres Salomon <dilinger@queued.net> + +This adds support for Multi-Function General Purpose Timers. It detects the +available timers during southbridge init, and provides an API for allocating +and setting the timers. They're higher resolution than the standard PIT, so +the MFGPTs come in handy for quite a few things. + +Note that we never clobber the timers that the BIOS might have opted to use; +we just check for unused timers. + +Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> +Signed-off-by: Andres Salomon <dilinger@debian.org> +Cc: Andi Kleen <ak@suse.de> +Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> +Signed-off-by: Andrew Morton <akpm@linux-foundation.org> +--- + + Documentation/kernel-parameters.txt | 3 + arch/i386/kernel/Makefile | 2 + arch/i386/kernel/geode.c | 4 + arch/i386/kernel/mfgpt.c | 199 ++++++++++++++++++++++++++ + include/asm-i386/geode.h | 50 ++++++ + 5 files changed, 257 insertions(+), 1 deletion(-) + +--- linux-2.6.22.orig/arch/i386/kernel/Makefile ++++ linux-2.6.22/arch/i386/kernel/Makefile +@@ -40,7 +40,7 @@ + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + obj-$(CONFIG_HPET_TIMER) += hpet.o + obj-$(CONFIG_K8_NB) += k8.o +-obj-$(CONFIG_MGEODE_LX) += geode.o ++obj-$(CONFIG_MGEODE_LX) += geode.o mfgpt.o + + obj-$(CONFIG_VMI) += vmi.o vmiclock.o + obj-$(CONFIG_PARAVIRT) += paravirt.o +--- linux-2.6.22.orig/arch/i386/kernel/geode.c ++++ linux-2.6.22/arch/i386/kernel/geode.c +@@ -146,10 +146,14 @@ + + static int __init geode_southbridge_init(void) + { ++ int timers; ++ + if (!is_geode()) + return -ENODEV; + + init_lbars(); ++ timers = geode_mfgpt_detect(); ++ printk(KERN_INFO "geode: %d MFGPT timers available.\n", timers); + return 0; + } + +--- /dev/null ++++ linux-2.6.22/arch/i386/kernel/mfgpt.c +@@ -0,0 +1,199 @@ ++/* ++ * Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT) ++ * ++ * Copyright (C) 2006, Advanced Micro Devices, Inc. ++ * Copyright (C) 2007, Andres Salomon <dilinger@debian.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of version 2 of the GNU General Public License ++ * as published by the Free Software Foundation. ++ * ++ * The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book. ++ */ ++ ++/* ++ * We are using the 32Khz input clock - its the only one that has the ++ * ranges we find desirable. The following table lists the suitable ++ * divisors and the associated hz, minimum interval ++ * and the maximum interval: ++ * ++ * Divisor Hz Min Delta (S) Max Delta (S) ++ * 1 32000 .0005 2.048 ++ * 2 16000 .001 4.096 ++ * 4 8000 .002 8.192 ++ * 8 4000 .004 16.384 ++ * 16 2000 .008 32.768 ++ * 32 1000 .016 65.536 ++ * 64 500 .032 131.072 ++ * 128 250 .064 262.144 ++ * 256 125 .128 524.288 ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <asm/geode.h> ++ ++#define F_AVAIL 0x01 ++ ++static struct mfgpt_timer_t { ++ int flags; ++ struct module *owner; ++} mfgpt_timers[MFGPT_MAX_TIMERS]; ++ ++/* Selected from the table above */ ++ ++#define MFGPT_DIVISOR 16 ++#define MFGPT_SCALE 4 /* divisor = 2^(scale) */ ++#define MFGPT_HZ (32000 / MFGPT_DIVISOR) ++#define MFGPT_PERIODIC (MFGPT_HZ / HZ) ++ ++/* Allow for disabling of MFGPTs */ ++static int disable; ++static int __init mfgpt_disable(char *s) ++{ ++ disable = 1; ++ return 1; ++} ++__setup("nomfgpt", mfgpt_disable); ++ ++/* ++ * Check whether any MFGPTs are available for the kernel to use. In most ++ * cases, firmware that uses AMD's VSA code will claim all timers during ++ * bootup; we certainly don't want to take them if they're already in use. ++ * In other cases (such as with VSAless OpenFirmware), the system firmware ++ * leaves timers available for us to use. ++ */ ++int __init geode_mfgpt_detect(void) ++{ ++ int count = 0, i; ++ u16 val; ++ ++ if (disable) { ++ printk(KERN_INFO "geode-mfgpt: Skipping MFGPT setup\n"); ++ return 0; ++ } ++ ++ for (i = 0; i < MFGPT_MAX_TIMERS; i++) { ++ val = geode_mfgpt_read(i, MFGPT_REG_SETUP); ++ if (!(val & MFGPT_SETUP_SETUP)) { ++ mfgpt_timers[i].flags = F_AVAIL; ++ count++; ++ } ++ } ++ ++ return count; ++} ++ ++int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) ++{ ++ u32 msr, mask, value, dummy; ++ int shift = (cmp == MFGPT_CMP1) ? 0 : 8; ++ ++ if (timer < 0 || timer >= MFGPT_MAX_TIMERS) ++ return -EIO; ++ ++ /* ++ * The register maps for these are described in sections 6.17.1.x of ++ * the AMD Geode CS5536 Companion Device Data Book. ++ */ ++ switch (event) { ++ case MFGPT_EVENT_RESET: ++ /* ++ * XXX: According to the docs, we cannot reset timers above ++ * 6; that is, resets for 7 and 8 will be ignored. Is this ++ * a problem? -dilinger ++ */ ++ msr = MFGPT_NR_MSR; ++ mask = 1 << (timer + 24); ++ break; ++ ++ case MFGPT_EVENT_NMI: ++ msr = MFGPT_NR_MSR; ++ mask = 1 << (timer + shift); ++ break; ++ ++ case MFGPT_EVENT_IRQ: ++ msr = MFGPT_IRQ_MSR; ++ mask = 1 << (timer + shift); ++ break; ++ ++ default: ++ return -EIO; ++ } ++ ++ rdmsr(msr, value, dummy); ++ ++ if (enable) ++ value |= mask; ++ else ++ value &= ~mask; ++ ++ wrmsr(msr, value, dummy); ++ return 0; ++} ++EXPORT_SYMBOL(geode_mfgpt_toggle_event); ++ ++int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) ++{ ++ u32 val, dummy; ++ int offset; ++ ++ if (timer < 0 || timer >= MFGPT_MAX_TIMERS) ++ return -EIO; ++ ++ if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) ++ return -EIO; ++ ++ rdmsr(0x51400022, val, dummy); ++ ++ offset = (timer % 4) * 4; ++ ++ val &= ~((0xF << offset) | (0xF << (offset + 16))); ++ ++ if (enable) { ++ val |= (irq & 0x0F) << (offset); ++ val |= (irq & 0x0F) << (offset + 16); ++ } ++ ++ wrmsr(0x51400022, val, dummy); ++ return 0; ++} ++EXPORT_SYMBOL(geode_mfgpt_set_irq); ++ ++static int mfgpt_get(int timer, struct module *owner) ++{ ++ mfgpt_timers[timer].flags &= ~F_AVAIL; ++ mfgpt_timers[timer].owner = owner; ++ printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer); ++ return timer; ++} ++ ++int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner) ++{ ++ int i; ++ ++ if (!geode_get_dev_base(GEODE_DEV_MFGPT)) ++ return -ENODEV; ++ if (timer >= MFGPT_MAX_TIMERS) ++ return -EIO; ++ ++ if (timer < 0) { ++ /* Try to find an available timer */ ++ for (i = 0; i < MFGPT_MAX_TIMERS; i++) { ++ if (mfgpt_timers[i].flags & F_AVAIL) ++ return mfgpt_get(i, owner); ++ ++ if (i == 5 && domain == MFGPT_DOMAIN_WORKING) ++ break; ++ } ++ } else { ++ /* If they requested a specific timer, try to honor that */ ++ if (mfgpt_timers[timer].flags & F_AVAIL) ++ return mfgpt_get(timer, owner); ++ } ++ ++ /* No timers available - too bad */ ++ return -1; ++} ++EXPORT_SYMBOL(geode_mfgpt_alloc_timer); +--- linux-2.6.22.orig/include/asm-i386/geode.h ++++ linux-2.6.22/include/asm-i386/geode.h +@@ -156,4 +156,54 @@ + return (is_geode_gx() || is_geode_lx()); + } + ++/* MFGPTs */ ++ ++#define MFGPT_MAX_TIMERS 8 ++#define MFGPT_TIMER_ANY -1 ++ ++#define MFGPT_DOMAIN_WORKING 1 ++#define MFGPT_DOMAIN_STANDBY 2 ++#define MFGPT_DOMAIN_ANY (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY) ++ ++#define MFGPT_CMP1 0 ++#define MFGPT_CMP2 1 ++ ++#define MFGPT_EVENT_IRQ 0 ++#define MFGPT_EVENT_NMI 1 ++#define MFGPT_EVENT_RESET 3 ++ ++#define MFGPT_REG_CMP1 0 ++#define MFGPT_REG_CMP2 2 ++#define MFGPT_REG_COUNTER 4 ++#define MFGPT_REG_SETUP 6 ++ ++#define MFGPT_SETUP_CNTEN (1 << 15) ++#define MFGPT_SETUP_CMP2 (1 << 14) ++#define MFGPT_SETUP_CMP1 (1 << 13) ++#define MFGPT_SETUP_SETUP (1 << 12) ++#define MFGPT_SETUP_STOPEN (1 << 11) ++#define MFGPT_SETUP_EXTEN (1 << 10) ++#define MFGPT_SETUP_REVEN (1 << 5) ++#define MFGPT_SETUP_CLKSEL (1 << 4) ++ ++static inline void geode_mfgpt_write(int timer, u16 reg, u16 value) ++{ ++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); ++ outw(value, base + reg + (timer * 8)); ++} ++ ++static inline u16 geode_mfgpt_read(int timer, u16 reg) ++{ ++ u32 base = geode_get_dev_base(GEODE_DEV_MFGPT); ++ return inw(base + reg + (timer * 8)); ++} ++ ++extern int __init geode_mfgpt_detect(void); ++extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); ++extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable); ++extern int geode_mfgpt_alloc_timer(int timer, int domain, struct module *owner); ++ ++#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1) ++#define geode_mfgpt_release_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 0) ++ + #endif diff --git a/packages/linux/linux_2.6.22+2.6.23-rc3.bb b/packages/linux/linux_2.6.22+2.6.23-rc3.bb index 6e758866bf..5671173672 100644 --- a/packages/linux/linux_2.6.22+2.6.23-rc3.bb +++ b/packages/linux/linux_2.6.22+2.6.23-rc3.bb @@ -1,6 +1,7 @@ require linux.inc DEFAULT_PREFERENCE = "-1" +DEFAULT_PREFERENCE_alix = "1" DEFAULT_PREFERENCE_at91sam9263ek = "1" BASE_KERNEL_VERSION = "2.6.22" @@ -12,12 +13,16 @@ PR = "r0" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${BASE_KERNEL_VERSION}.tar.bz2 \ ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/testing/patch-${KERNEL_VERSION}.bz2;patch=1 \ file://defconfig \ - " + " SRC_URI_append_kb9202 = " http://maxim.org.za/AT91RM9200/2.6/2.6.23-rc3-at91.patch.gz;patch=1 \ " SRC_URI_append_at91sam9263ek = " http://maxim.org.za/AT91RM9200/2.6/2.6.23-rc3-at91.patch.gz;patch=1 \ " +SRC_URI_append_alix = "file://geode-mfgpt-support-for-geode-class-machines.patch;patch=1 \ + file://geode-mfgpt-clock-event-device-support.patch;patch=1" + + S = "${WORKDIR}/linux-${BASE_KERNEL_VERSION}" diff --git a/packages/linux/linux_2.6.22.bb b/packages/linux/linux_2.6.22.bb index 6791e33014..8674d63af2 100644 --- a/packages/linux/linux_2.6.22.bb +++ b/packages/linux/linux_2.6.22.bb @@ -2,7 +2,6 @@ require linux.inc # Mark archs/machines that this kernel supports DEFAULT_PREFERENCE = "-1" -DEFAULT_PREFERENCE_alix = "1" DEFAULT_PREFERENCE_avr32 = "1" PR = "r2" diff --git a/packages/lyx/lyx_1.4.4+1.5.0rc1.bb b/packages/lyx/lyx_1.5.1.bb index 41f6bf1487..60c10850b6 100644 --- a/packages/lyx/lyx_1.4.4+1.5.0rc1.bb +++ b/packages/lyx/lyx_1.5.1.bb @@ -5,17 +5,16 @@ HOMEPAGE = "http://www.lyx.org" DEPENDS = "boost qt4-x11-free" RRECOMMENDS = "tetex" RDEPENDS = "python-shell python-textutils" -PR = "r2" +PR = "r0" DEFAULT_PREFERENCE = "-1" -# we're checking out from svn because the tarball doesn't contain the necessary stuff to run autoreconf -SRC_URI = "svn://svn.lyx.org/lyx/lyx-devel/tags;module=lyx_1_5_0rc1;rev=18613" -S = "${WORKDIR}/lyx_1_5_0rc1" +SRC_URI = "http://lyx.cybermirror.org/stable/lyx-${PV}.tar.bz2" inherit autotools qt4x11 EXTRA_OECONF = " --with-qt4-dir=${QTDIR} -enable-pch" +EXTRA_QMAKEVARS_POST = "DEFINES+=_LIBC" PARALLEL_MAKE = "" do_configure_prepend() { @@ -25,3 +24,4 @@ do_configure_prepend() { export UIC="${OE_QMAKE_UIC}" export MOC="${OE_QMAKE_MOC}" +export OE_QMAKE_LIBS_X11="-lX11 -lXext" diff --git a/packages/openmoko-panel-plugins/files/.mtn2git_empty b/packages/openmoko-panel-plugins/files/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/openmoko-panel-plugins/files/.mtn2git_empty diff --git a/packages/openmoko-panel-plugins/files/panel-bluetooth.patch b/packages/openmoko-panel-plugins/files/panel-bluetooth.patch new file mode 100644 index 0000000000..1355158c7c --- /dev/null +++ b/packages/openmoko-panel-plugins/files/panel-bluetooth.patch @@ -0,0 +1,174 @@ +Index: src/openmoko-panel-bt.c +=================================================================== +--- a/src/openmoko-panel-bt.c (revision 2567) ++++ b/src/openmoko-panel-bt.c (working copy) +@@ -17,18 +17,131 @@ + #include <libmokopanelui2/moko-panel-applet.h> + + #include <gtk/gtkimage.h> ++#include <gtk/gtkbox.h> ++#include <gtk/gtk.h> + #include <time.h> ++#include <stdlib.h> ++#include <stdio.h> + ++ + typedef struct { +- GtkImage *image; ++ MokoPanelApplet *mokoapplet; ++ GtkImage *image; ++ int state; + } BtApplet; + ++void quick_message(gchar *message) { ++ ++ GtkWidget *dialog, *label, *okay_button; ++ ++ /* Create the widgets */ ++ ++ dialog = gtk_dialog_new(); ++ label = gtk_label_new (message); ++ okay_button = gtk_button_new_with_label("Okay"); ++ ++ /* Ensure that the dialog box is destroyed when the user clicks ok. */ ++ ++ gtk_signal_connect_object (GTK_OBJECT (okay_button), "clicked", ++ GTK_SIGNAL_FUNC (gtk_widget_destroy), dialog); ++ gtk_container_add (GTK_CONTAINER (GTK_DIALOG(dialog)->action_area), ++ okay_button); ++ ++ gtk_window_set_title(GTK_WINDOW(dialog), "Bt Status"); ++ ++ /* Add the label, and show everything we've added to the dialog. */ ++ ++ gtk_container_add (GTK_CONTAINER (GTK_DIALOG(dialog)->vbox), ++ label); ++ gtk_widget_show_all (dialog); ++} ++ ++#define BT_POWERON_FILENAME "/sys/class/i2c-dev/i2c-0/device/0-0008/gta01-pm-bt.0/power_on" ++ ++static int ++read_bt_power(void) ++{ ++ FILE * f = fopen(BT_POWERON_FILENAME, "r+"); ++ int val; ++ ++ if (f == NULL) return -1; ++ ++ fscanf(f, "%i", &val); ++ fclose(f); ++ return val; ++} ++ ++static int ++set_bt_power(int val) ++{ ++ FILE * f = fopen(BT_POWERON_FILENAME, "w"); ++ ++ if (f == NULL) return -1; ++ ++ fprintf(f, "%i\n", val); ++ ++ fclose(f); ++ ++ return val; ++} ++ + static void ++mb_panel_update(BtApplet *applet, int state) ++{ ++ ++ if(applet->state != state) { ++ printf("Will change the image ... \n"); ++ if (state == 1) ++ gtk_image_set_from_file(applet->image, PKGDATADIR "/Bluetooth_On.png"); ++ else ++ gtk_image_set_from_file(applet->image, PKGDATADIR "/Bluetooth_Off.png"); ++ applet->state = state; ++ } ++} ++ ++ ++ ++static void ++bt_applet_power_on(GtkWidget* menu, BtApplet* applet) ++{ ++ int ret; ++ ret = set_bt_power(1); ++ mb_panel_update(applet, 1); ++ quick_message(" Bluetooth turned on \n\n"); ++} ++ ++static void ++bt_applet_power_off(GtkWidget* menu, BtApplet* applet) ++{ ++ int ret; ++ ret = set_bt_power(0); ++ mb_panel_update(applet, 0); ++ quick_message(" Bluetooth turned off \n\n"); ++} ++ ++ ++static void ++bt_applet_status(GtkWidget* menu, BtApplet* applet) ++{ ++ int ret; ++ char tmp_string[256]; ++ ++ ret = read_bt_power(); ++ ++ sprintf(tmp_string, " Bluetooth is %s \n\n", ret ? "on" : "off"); ++ ++ quick_message(tmp_string); ++ ++} ++ ++static void + bt_applet_free (BtApplet *applet) + { + g_slice_free (BtApplet, applet); + } + ++ ++ + G_MODULE_EXPORT GtkWidget* + mb_panel_applet_create(const char* id, GtkOrientation orientation) + { +@@ -40,11 +153,33 @@ + + applet = g_slice_new (BtApplet); + +- applet->image = GTK_IMAGE(gtk_image_new_from_file ( PKGDATADIR "/Bluetooth_Off.png")); ++ applet->state = read_bt_power(); ++ applet->mokoapplet = mokoapplet; ++ ++ if (applet->state == 0) { ++ applet->image = GTK_IMAGE(gtk_image_new_from_file ( PKGDATADIR "/Bluetooth_Off.png")); ++ } else { ++ applet->image = GTK_IMAGE(gtk_image_new_from_file ( PKGDATADIR "/Bluetooth_On.png")); ++ } + gtk_widget_set_name( applet->image, "openmoko-bt-applet" ); + g_object_weak_ref( G_OBJECT(applet->image), (GWeakNotify) bt_applet_free, applet ); ++ moko_panel_applet_set_widget( GTK_CONTAINER(applet->mokoapplet), applet->image ); ++ gtk_widget_show_all( GTK_WIDGET(applet->mokoapplet) ); ++ + +- moko_panel_applet_set_widget( GTK_CONTAINER(mokoapplet), applet->image ); +- gtk_widget_show_all( GTK_WIDGET(mokoapplet) ); ++ GtkMenu* menu = GTK_MENU(gtk_menu_new()); ++ GtkWidget* item1 = gtk_menu_item_new_with_label("Power-Up Bluetooth radio"); ++ g_signal_connect(G_OBJECT(item1), "activate", G_CALLBACK(bt_applet_power_on), applet); ++ gtk_menu_shell_append(GTK_MENU_SHELL(menu), item1); ++ GtkWidget* item2 = gtk_menu_item_new_with_label("Power-Off Bluetooth radio"); ++ g_signal_connect(G_OBJECT(item2), "activate", G_CALLBACK(bt_applet_power_off), applet); ++ gtk_menu_shell_append(GTK_MENU_SHELL(menu), item2); ++ GtkWidget* item3 = gtk_menu_item_new_with_label("Bluetooth status"); ++ g_signal_connect(G_OBJECT(item3), "activate", G_CALLBACK(bt_applet_status), applet); ++ gtk_menu_shell_append(GTK_MENU_SHELL(menu), item3); ++ ++ gtk_widget_show_all(GTK_WIDGET(menu)); ++ moko_panel_applet_set_popup( mokoapplet, GTK_WIDGET(menu), MOKO_PANEL_APPLET_CLICK_POPUP); ++ + return GTK_WIDGET(mokoapplet); + }; diff --git a/packages/openmoko-panel-plugins/openmoko-panel-bt_svn.bb b/packages/openmoko-panel-plugins/openmoko-panel-bt_svn.bb index 9d5fc85f3f..29ae8fb4db 100644 --- a/packages/openmoko-panel-plugins/openmoko-panel-bt_svn.bb +++ b/packages/openmoko-panel-plugins/openmoko-panel-bt_svn.bb @@ -1,6 +1,9 @@ DESCRIPTION = "Shows the bluetooth status in the OpenMoko panel" DEPENDS = "bluez-libs" PV = "0.1.0+svn${SVNREV}" +PR = "r1" inherit openmoko-panel-plugin +SRC_URI += "file://panel-bluetooth.patch;patch=1" + diff --git a/packages/openmoko2/openmoko-dialer2/.mtn2git_empty b/packages/openmoko2/openmoko-dialer2/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/openmoko2/openmoko-dialer2/.mtn2git_empty diff --git a/packages/openmoko2/openmoko-dialer2/openmoko-dialer.patch b/packages/openmoko2/openmoko-dialer2/openmoko-dialer.patch new file mode 100644 index 0000000000..5969726857 --- /dev/null +++ b/packages/openmoko2/openmoko-dialer2/openmoko-dialer.patch @@ -0,0 +1,117 @@ +--- openmoko-dialer2/src/moko-dialer.c~ 2007-08-27 20:02:37.000000000 +0930 ++++ openmoko-dialer2/src/moko-dialer.c 2007-08-27 18:59:37.000000000 +0930 +@@ -69,8 +69,7 @@ + + /* Registration variables */ + guint reg_timeout; +- gboolean reg_request; +- gboolean registered; ++ MokoGsmdConnectionNetregType registered; + }; + + enum +@@ -292,8 +291,7 @@ + + moko_keypad_set_pin_mode (MOKO_KEYPAD (priv->keypad), FALSE); + +- priv->reg_request = TRUE; +- priv->registered = FALSE; ++ priv->registered = MOKO_GSMD_CONNECTION_NETREG_NONE; + priv->reg_timeout = g_timeout_add (GSM_REGISTER_TIMEOUT, + (GSourceFunc)register_network_cb, + dialer); +@@ -424,14 +422,14 @@ + g_return_if_fail (MOKO_IS_DIALER (dialer)); + priv = dialer->priv; + ++ g_warning ("on_network_registered: type is %d\n", type); ++ + switch (type) + { + case MOKO_GSMD_CONNECTION_NETREG_NONE: + case MOKO_GSMD_CONNECTION_NETREG_SEARCHING: + /* Do nothing */ + g_print ("NetReg: Searching for network\n"); +- g_source_remove (priv->reg_timeout); +- priv->registered = TRUE; + break; + case MOKO_GSMD_CONNECTION_NETREG_DENIED: + /* This may be a pin issue*/ +@@ -441,11 +439,12 @@ + g_print ("NetReg: Network registered\n"); + g_print("\tLocationAreaCode = %x\n\tCellID = %x\n", lac, cell); + g_source_remove (priv->reg_timeout); +- priv->registered = TRUE; + break; + default: + g_warning ("Unhandled register event type = %d\n", type); + }; ++ ++ priv->registered = type; + } + + static void +@@ -619,28 +618,32 @@ + g_return_val_if_fail (MOKO_DIALER (dialer), TRUE); + priv = MOKO_DIALER_GET_PRIVATE (dialer); + +- if (!priv->reg_request) ++ /* We check whether we've been registered yet, otherwise keep poking ++ * gsmd ++ */ ++ switch (priv->registered) + { +- /* We have yet to request registration, so lets do it */ +- /* FIXME: do the pin stuff */ +- g_print ("Requesting registration\n"); +- moko_gsmd_connection_network_register (priv->connection); +- } +- else +- { +- /* We check whether we've been registered yet, otherwise keep poking +- * gsmd +- */ +- if (priv->registered) +- { +- g_print ("Network Registered\n"); +- return FALSE; +- } +- else +- { ++ case MOKO_GSMD_CONNECTION_NETREG_NONE: ++ /* We have yet to request registration, so lets do it */ ++ /* FIXME: do the pin stuff */ + g_print ("Requesting registration\n"); + moko_gsmd_connection_network_register (priv->connection); +- } ++ priv->registered = MOKO_GSMD_CONNECTION_NETREG_SEARCHING; ++ break; ++ case MOKO_GSMD_CONNECTION_NETREG_SEARCHING: ++ g_print ("Waiting for registration\n"); ++ break; ++ case MOKO_GSMD_CONNECTION_NETREG_DENIED: ++ g_print ("Registration denied, retrying\n"); ++ moko_gsmd_connection_network_register (priv->connection); ++ priv->registered = MOKO_GSMD_CONNECTION_NETREG_SEARCHING; ++ break; ++ case MOKO_GSMD_CONNECTION_NETREG_HOME: ++ case MOKO_GSMD_CONNECTION_NETREG_ROAMING: ++ g_print ("Network Registered\n"); ++ return FALSE; ++ default: ++ g_warning ("Unhandled register event type = %d\n", priv->registered); + } + + return TRUE; +@@ -754,9 +757,8 @@ + + /* Handle network registration a few seconds after powering up the + * antenna*/ +- priv->reg_request = TRUE; +- priv->registered = FALSE; +- priv->reg_timeout = g_timeout_add (GSM_REGISTER_TIMEOUT, ++ priv->registered = MOKO_GSMD_CONNECTION_NETREG_NONE; ++ priv->reg_timeout = g_timeout_add (GSM_REGISTER_TIMEOUT * 2, + (GSourceFunc)register_network_cb, + dialer); + diff --git a/packages/openmoko2/openmoko-dialer2_svn.bb b/packages/openmoko2/openmoko-dialer2_svn.bb index 9da832a27b..46f71376b1 100644 --- a/packages/openmoko2/openmoko-dialer2_svn.bb +++ b/packages/openmoko2/openmoko-dialer2_svn.bb @@ -2,10 +2,12 @@ DESCRIPTION = "The OpenMoko Dialer" SECTION = "openmoko/pim" DEPENDS = "libmokogsmd2 libmokoui2 libmokojournal2 pulseaudio" PV = "0.1.0+svn${SVNREV}" -PR = "r3" +PR = "r4" inherit openmoko2 +SRC_URI += "file://openmoko-dialer.patch;patch=1" + EXTRA_OECONF = "--with-dbusbindir=${STAGING_BINDIR_NATIVE}" FILES_${PN} += "${datadir}/openmoko-dialer/ ${datadir}/dbus-1/services/" diff --git a/packages/openssl/openssl-0.9.7g/armeb.patch.lock b/packages/openssl/openssl-0.9.7g/armeb.patch.lock new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/openssl/openssl-0.9.7g/armeb.patch.lock diff --git a/packages/openssl/openssl-0.9.7g/debian.patch.lock b/packages/openssl/openssl-0.9.7g/debian.patch.lock new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/openssl/openssl-0.9.7g/debian.patch.lock diff --git a/packages/openssl/openssl-0.9.7g/gnueabi-arm.patch.lock b/packages/openssl/openssl-0.9.7g/gnueabi-arm.patch.lock new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/openssl/openssl-0.9.7g/gnueabi-arm.patch.lock diff --git a/packages/openssl/openssl-0.9.7g/gnueabi-armeb.patch.lock b/packages/openssl/openssl-0.9.7g/gnueabi-armeb.patch.lock new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/openssl/openssl-0.9.7g/gnueabi-armeb.patch.lock diff --git a/packages/openssl/openssl-0.9.7g/uclibcgnueabi.patch b/packages/openssl/openssl-0.9.7g/uclibcgnueabi.patch new file mode 100644 index 0000000000..d89bfdeec9 --- /dev/null +++ b/packages/openssl/openssl-0.9.7g/uclibcgnueabi.patch @@ -0,0 +1,12 @@ +--- /tmp/Configure.patched 2007-08-27 18:34:23.412489103 +0200 ++++ openssl-0.9.7g/Configure 2007-08-27 18:35:05.134866725 +0200 +@@ -478,6 +478,9 @@ + "linux-elf-armeb","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", + "linux-gnueabi-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", + "linux-gnueabi-armeb","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", ++"linux-uclibcgnueabi-arm","gcc:-DL_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", ++"linux-uclibcgnueabi-armeb","gcc:-DB_ENDIAN -DTERMIO -O3 -fomit-frame-pointer -Wall::-D_REENTRANT::-ldl:BN_LLONG::::::::::dlfcn:linux-shared:-fPIC::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)", ++ + + # SCO/Caldera targets. + # diff --git a/packages/openssl/openssl_0.9.7g.bb b/packages/openssl/openssl_0.9.7g.bb index d61a3a8297..c128275867 100644 --- a/packages/openssl/openssl_0.9.7g.bb +++ b/packages/openssl/openssl_0.9.7g.bb @@ -2,9 +2,10 @@ inherit pkgconfig require openssl.inc -PR = "r4" +PR = "r5" SRC_URI += "file://debian.patch;patch=1 \ file://armeb.patch;patch=1;pnum=0 \ file://gnueabi-arm.patch;patch=1 \ - file://gnueabi-armeb.patch;patch=1" + file://gnueabi-armeb.patch;patch=1 \ + file://uclibcgnueabi.patch;patch=1" diff --git a/packages/qemu/qemu-gcc3-check.inc b/packages/qemu/qemu-gcc3-check.inc new file mode 100644 index 0000000000..96b79fdf14 --- /dev/null +++ b/packages/qemu/qemu-gcc3-check.inc @@ -0,0 +1,20 @@ +python __anonymous() { + from bb import which, data + + path = data.getVar('PATH', d) + oldOeConf = data.getVar('EXTRA_OECONF', d) + if not oldOeConf: oldOeConf = "" + if len(which(path, 'gcc-3.4')) != 0: + data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.4", d) + elif len(which(path, 'gcc34')) != 0: + data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc34", d) + elif len(which(path, 'gcc33')) != 0: + data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc33", d) + elif len(which(path, 'gcc-3.3')) != 0: + data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.3", d) + elif len(which(path, 'gcc-3.3.6')) != 0: + data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.3.6", d) + elif len(which(path, 'gcc-3.4.6')) != 0: + data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.4.6", d) +} + diff --git a/packages/qemu/qemu-native.inc b/packages/qemu/qemu-native.inc index 81f09446dd..f97e031f73 100644 --- a/packages/qemu/qemu-native.inc +++ b/packages/qemu/qemu-native.inc @@ -2,25 +2,7 @@ FILESPATH =. "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/qemu-${PV}:" # prefix = "${STAGING_DIR}/${BUILD_SYS}" DEPENDS = "libsdl-native zlib-native" -python __anonymous() { - from bb import which, data - - path = data.getVar('PATH', d) - oldOeConf = data.getVar('EXTRA_OECONF', d) - if not oldOeConf: oldOeConf = "" - if len(which(path, 'gcc-3.4')) != 0: - data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.4", d) - elif len(which(path, 'gcc34')) != 0: - data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc34", d) - elif len(which(path, 'gcc33')) != 0: - data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc33", d) - elif len(which(path, 'gcc-3.3')) != 0: - data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.3", d) - elif len(which(path, 'gcc-3.3.6')) != 0: - data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.3.6", d) - elif len(which(path, 'gcc-3.4.6')) != 0: - data.setVar('EXTRA_OECONF', oldOeConf + " --cc=gcc-3.4.6", d) -} +require qemu-gcc3-check.inc do_stage() { find . -name "qemu-*" -type f -perm -755 -exec install -m 0755 {} ${STAGING_BINDIR} \; diff --git a/packages/qemu/qemu-native_20070613.bb b/packages/qemu/qemu-native_20070613.bb index f040280570..88c944a308 100644 --- a/packages/qemu/qemu-native_20070613.bb +++ b/packages/qemu/qemu-native_20070613.bb @@ -3,18 +3,5 @@ inherit native DEPENDS = "zlib-native" prefix = "${STAGING_DIR}/${BUILD_SYS}" -python __anonymous() { - from bb import which, data - - path = data.getVar('PATH', d) - oeconf = data.getVar('EXTRA_OECONF', d) or '' - if len(which(path, 'gcc-3.4.6')) != 0: - data.setVar('EXTRA_OECONF', oeconf + " --cc=gcc-3.4.6", d) - elif len(which(path, 'gcc-3.4')) != 0: - data.setVar('EXTRA_OECONF', oeconf + " --cc=gcc-3.4", d) - elif len(which(path, 'gcc34')) != 0: - data.setVar('EXTRA_OECONF', oeconf + " --cc=gcc34", d) - elif len(which(path, 'gcc-3.3')) != 0: - data.setVar('EXTRA_OECONF', oeconf + " --cc=gcc-3.3", d) - #data.setVarFlag('PKG_CONFIG_PATH', 'unexport', '1', d) -} +require qemu-gcc3-check.inc + diff --git a/packages/qt/qt4-x11-free_4.3.0.bb b/packages/qt/qt4-x11-free_4.3.0.bb index 181fd5086f..8ad20178bb 100644 --- a/packages/qt/qt4-x11-free_4.3.0.bb +++ b/packages/qt/qt4-x11-free_4.3.0.bb @@ -1,12 +1,13 @@ +DESCRIPTION = "Qt is a versatile cross-platform application framework -- this is the X11 version." SECTION = "x11/libs" PRIORITY = "optional" HOMEPAGE = "http://www.trolltech.com" LICENSE = "GPL QPL" -DEPENDS = "pkgconfig-native uicmoc4-native qmake2-native freetype jpeg virtual/libx11 xft libxext libxrender libxrandr libxcursor dbus openssl" +DEPENDS = "pkgconfig-native uicmoc4-native qmake2-native freetype jpeg virtual/libx11 \ + xft libxext libxrender libxrandr libxcursor dbus openssl" RDEPENDS_${PN} = "${NONDEV_PACKAGES}" PROVIDES = "qt4x11" - -PR = "r5" +PR = "r6" SRC_URI = "ftp://ftp.trolltech.com/qt/source/qt-x11-opensource-src-${PV}.tar.gz \ file://0001-cross-compile.patch;patch=1 \ @@ -76,11 +77,12 @@ do_stage() { install -m 0755 ${STAGING_BINDIR_NATIVE}/rcc4 ${STAGING_QT_DIR}/bin/rcc install -m 0755 ${STAGING_BINDIR_NATIVE}/moc4 ${STAGING_QT_DIR}/bin/moc install -m 0755 ${STAGING_BINDIR_NATIVE}/uic4 ${STAGING_QT_DIR}/bin/uic - sed -i -e 's,^QMAKE_RPATHDIR.*,QMAKE_RPATHDIR=${STAGING_QT_DIR}/lib,g' ${STAGING_QT_DIR}/mkspecs/qconfig.pri + sed -i -e 's,^QMAKE_RPATHDIR.*,QMAKE_RPATHDIR=${STAGING_QT_DIR}/lib,g' ${STAGING_QT_DIR}/mkspecs/qconfig.pri for pcc in AssistantClient DBus Test UiTools ; do sed -i -e 's,${S}/lib,${STAGING_QT_DIR}/lib,g' ${STAGING_QT_DIR}/lib/pkgconfig/Qt${pcc}.pc done for pc in ${STAGING_QT_DIR}/lib/pkgconfig/*.pc ; do + sed -i -e 's,$(OE_QMAKE_LIBS_X11),-lX11 -lXext,g' $pc install -m 0644 $pc ${PKG_CONFIG_PATH}/ done } diff --git a/packages/uclibc/uclibc-0.9.29/gumstix-connex/.mtn2git_empty b/packages/uclibc/uclibc-0.9.29/gumstix-connex/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/uclibc/uclibc-0.9.29/gumstix-connex/.mtn2git_empty diff --git a/packages/uclibc/uclibc-0.9.29/gumstix-connex/uClibc.machine b/packages/uclibc/uclibc-0.9.29/gumstix-connex/uClibc.machine new file mode 100644 index 0000000000..ec0385bc0f --- /dev/null +++ b/packages/uclibc/uclibc-0.9.29/gumstix-connex/uClibc.machine @@ -0,0 +1,70 @@ +# +# Automatically generated make config: don't edit +# Sun May 13 11:16:02 2007 +# +# TARGET_alpha is not set +TARGET_arm=y +# TARGET_bfin is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_hppa is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_ia64 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +# TARGET_mips is not set +# TARGET_nios is not set +# TARGET_nios2 is not set +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_vax is not set +# TARGET_x86_64 is not set + +# +# Target Architecture Features and Options +# +TARGET_ARCH="arm" +FORCE_OPTIONS_FOR_ARCH=y +# CONFIG_ARM_OABI is not set +CONFIG_ARM_EABI=y +USE_BX=y +# CONFIG_GENERIC_ARM is not set +# CONFIG_ARM610 is not set +# CONFIG_ARM710 is not set +# CONFIG_ARM7TDMI is not set +# CONFIG_ARM720T is not set +# CONFIG_ARM920T is not set +# CONFIG_ARM922T is not set +# CONFIG_ARM926T is not set +# CONFIG_ARM10T is not set +# CONFIG_ARM1136JF_S is not set +# CONFIG_ARM1176JZ_S is not set +# CONFIG_ARM1176JZF_S is not set +# CONFIG_ARM_SA110 is not set +# CONFIG_ARM_SA1100 is not set +CONFIG_ARM_XSCALE=y +# CONFIG_ARM_IWMMXT is not set +TARGET_SUBARCH="" + +# +# Using ELF file format +# +ARCH_ANY_ENDIAN=y +ARCH_LITTLE_ENDIAN=y +# ARCH_WANTS_BIG_ENDIAN is not set +ARCH_WANTS_LITTLE_ENDIAN=y +ARCH_HAS_MMU=y +ARCH_USE_MMU=y +UCLIBC_HAS_FLOATS=y +# UCLIBC_HAS_FPU is not set +UCLIBC_HAS_SOFT_FLOAT=y +DO_C99_MATH=y +KERNEL_HEADERS="/data/build/koen/OE/build/tmp/angstrom/cross/arm-angstrom-linux-uclibcgnueabi/include" +HAVE_DOT_CONFIG=y + diff --git a/packages/uclibc/uclibc-0.9.29/gumstix-verdex/.mtn2git_empty b/packages/uclibc/uclibc-0.9.29/gumstix-verdex/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/uclibc/uclibc-0.9.29/gumstix-verdex/.mtn2git_empty diff --git a/packages/uclibc/uclibc-0.9.29/gumstix-verdex/uClibc.machine b/packages/uclibc/uclibc-0.9.29/gumstix-verdex/uClibc.machine new file mode 100644 index 0000000000..ec0385bc0f --- /dev/null +++ b/packages/uclibc/uclibc-0.9.29/gumstix-verdex/uClibc.machine @@ -0,0 +1,70 @@ +# +# Automatically generated make config: don't edit +# Sun May 13 11:16:02 2007 +# +# TARGET_alpha is not set +TARGET_arm=y +# TARGET_bfin is not set +# TARGET_cris is not set +# TARGET_e1 is not set +# TARGET_frv is not set +# TARGET_h8300 is not set +# TARGET_hppa is not set +# TARGET_i386 is not set +# TARGET_i960 is not set +# TARGET_ia64 is not set +# TARGET_m68k is not set +# TARGET_microblaze is not set +# TARGET_mips is not set +# TARGET_nios is not set +# TARGET_nios2 is not set +# TARGET_powerpc is not set +# TARGET_sh is not set +# TARGET_sh64 is not set +# TARGET_sparc is not set +# TARGET_v850 is not set +# TARGET_vax is not set +# TARGET_x86_64 is not set + +# +# Target Architecture Features and Options +# +TARGET_ARCH="arm" +FORCE_OPTIONS_FOR_ARCH=y +# CONFIG_ARM_OABI is not set +CONFIG_ARM_EABI=y +USE_BX=y +# CONFIG_GENERIC_ARM is not set +# CONFIG_ARM610 is not set +# CONFIG_ARM710 is not set +# CONFIG_ARM7TDMI is not set +# CONFIG_ARM720T is not set +# CONFIG_ARM920T is not set +# CONFIG_ARM922T is not set +# CONFIG_ARM926T is not set +# CONFIG_ARM10T is not set +# CONFIG_ARM1136JF_S is not set +# CONFIG_ARM1176JZ_S is not set +# CONFIG_ARM1176JZF_S is not set +# CONFIG_ARM_SA110 is not set +# CONFIG_ARM_SA1100 is not set +CONFIG_ARM_XSCALE=y +# CONFIG_ARM_IWMMXT is not set +TARGET_SUBARCH="" + +# +# Using ELF file format +# +ARCH_ANY_ENDIAN=y +ARCH_LITTLE_ENDIAN=y +# ARCH_WANTS_BIG_ENDIAN is not set +ARCH_WANTS_LITTLE_ENDIAN=y +ARCH_HAS_MMU=y +ARCH_USE_MMU=y +UCLIBC_HAS_FLOATS=y +# UCLIBC_HAS_FPU is not set +UCLIBC_HAS_SOFT_FLOAT=y +DO_C99_MATH=y +KERNEL_HEADERS="/data/build/koen/OE/build/tmp/angstrom/cross/arm-angstrom-linux-uclibcgnueabi/include" +HAVE_DOT_CONFIG=y + diff --git a/packages/uclibc/uclibc.inc b/packages/uclibc/uclibc.inc index ca6613d315..7fb8e5cf28 100644 --- a/packages/uclibc/uclibc.inc +++ b/packages/uclibc/uclibc.inc @@ -23,11 +23,16 @@ PROVIDES += "virtual/libc virtual/${TARGET_PREFIX}libc-for-gcc" PROVIDES += "${@['virtual/libiconv', ''][bb.data.getVar('USE_NLS', d, 1) != 'yes']}" DEPENDS = "virtual/${TARGET_PREFIX}binutils \ virtual/${TARGET_PREFIX}gcc-initial linux-libc-headers" + +# Blackfin needs a wrapper around ld +DEPENDS_append_bfin = " elf2flt " + INHIBIT_DEFAULT_DEPS = "1" PARALLEL_MAKE = "" PACKAGES =+ "ldd uclibc-utils-dbg uclibc-utils uclibc-gconv uclibc-thread-db" +# The last line (gdb and lib1) is for uclinux-uclibc builds uclibc_baselibs = "/lib/libcrypt*.so* /lib/libdl*.so \ /lib/libintl*.so* /lib/libm*.so \ /lib/libnsl*.so* /lib/libpthread*.so \ @@ -35,7 +40,9 @@ uclibc_baselibs = "/lib/libcrypt*.so* /lib/libdl*.so \ /lib/libuClibc*.so* /lib/ld*.so* \ /lib/libc*.so* /lib/libdl*.so* \ /lib/libm*.so* /lib/libutil*.so* \ - /lib/libpthread*.so* /lib/librt*.so*" + /lib/libpthread*.so* /lib/librt*.so* \ + /usr/lib/libc.gdb /usr/lib/libc /lib/lib1.so \ + " FILES_${PN} = "${sysconfdir} ${uclibc_baselibs} /sbin/ldconfig \ ${libexecdir} ${datadir}/zoneinfo ${libdir}/locale" FILES_ldd = "${bindir}/ldd" diff --git a/packages/udev/files/network.sh b/packages/udev/files/network.sh index 5016328df4..7c4bd00981 100644 --- a/packages/udev/files/network.sh +++ b/packages/udev/files/network.sh @@ -1,4 +1,6 @@ #!/bin/sh +# we need /sbin in our PATH +PATH="/sbin:/usr/sbin/:$PATH" # Do not run when pcmcia-cs is installed test -x /sbin/cardctl && exit 0 diff --git a/packages/udev/udev_092.bb b/packages/udev/udev_092.bb index b946b98c56..2732c73083 100644 --- a/packages/udev/udev_092.bb +++ b/packages/udev/udev_092.bb @@ -3,7 +3,7 @@ DESCRIPTION = "udev is a daemon which dynamically creates and removes device nod the hotplug package and requires a kernel not older than 2.6.12." RPROVIDES_${PN} = "hotplug" -PR = "r20" +PR = "r21" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \ file://noasmlinkage.patch;patch=1 \ diff --git a/packages/udev/udev_097.bb b/packages/udev/udev_097.bb index 360e6019d5..397d3b9f2a 100644 --- a/packages/udev/udev_097.bb +++ b/packages/udev/udev_097.bb @@ -8,7 +8,7 @@ used to detect the type of a file system and read its metadata." DESCRIPTION_libvolume-id-dev = "libvolume_id development headers, \ needed to link programs with libvolume_id." -PR = "r10" +PR = "r11" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \ file://noasmlinkage.patch;patch=1 \ diff --git a/packages/udev/udev_100.bb b/packages/udev/udev_100.bb index e4ef8395a6..ac981bbe9c 100644 --- a/packages/udev/udev_100.bb +++ b/packages/udev/udev_100.bb @@ -9,7 +9,7 @@ used to detect the type of a file system and read its metadata." DESCRIPTION_libvolume-id-dev = "libvolume_id development headers, \ needed to link programs with libvolume_id." -PR = "r9" +PR = "r10" SRC_URI = "${KERNELORG_MIRROR}/pub/linux/utils/kernel/hotplug/udev-${PV}.tar.gz \ file://noasmlinkage.patch;patch=1 \ |