diff options
17 files changed, 7065 insertions, 322 deletions
diff --git a/packages/linux/linux-rp-2.6.23/defconfig-akita b/packages/linux/linux-rp-2.6.23/defconfig-akita index 9587fb2a23..ddc7ba01b1 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-akita +++ b/packages/linux/linux-rp-2.6.23/defconfig-akita @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.23 -# Tue Oct 16 13:20:27 2007 +# Mon May 19 22:50:30 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -34,7 +34,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -241,7 +241,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable quiet" +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1 dyntick=enable debug" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -1081,9 +1081,6 @@ CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set # # Sound diff --git a/packages/linux/linux-rp-2.6.23/defconfig-bootcdx86 b/packages/linux/linux-rp-2.6.23/defconfig-bootcdx86 index e8852205e5..244df733ac 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-bootcdx86 +++ b/packages/linux/linux-rp-2.6.23/defconfig-bootcdx86 @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21 -# Mon Jun 11 12:01:43 2007 +# Linux kernel version: 2.6.23 +# Wed Feb 6 18:24:38 2008 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y @@ -14,6 +15,7 @@ CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_X86=y CONFIG_MMU=y CONFIG_ZONE_DMA=y +CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y @@ -23,28 +25,24 @@ CONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 # CONFIG_CPUSETS is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set @@ -63,31 +61,29 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -142,9 +138,11 @@ CONFIG_MPENTIUMII=y # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set +# CONFIG_MVIAC7 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=7 +CONFIG_X86_XADD=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -153,11 +151,12 @@ CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y -CONFIG_X86_CMPXCHG64=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_TSC=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y CONFIG_NR_CPUS=8 CONFIG_SCHED_SMT=y @@ -185,14 +184,17 @@ CONFIG_VM86=y # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set +CONFIG_DMIID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_2G_OPT is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_X86_PAE is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y @@ -207,6 +209,9 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_NR_QUICK=1 +CONFIG_VIRT_TO_BUS=y # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set @@ -218,11 +223,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_KEXEC=y -CONFIG_ATAGS_PROC=y CONFIG_PHYSICAL_START=0x100000 # CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x100000 -# CONFIG_HOTPLUG_CPU is not set +CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set # @@ -231,22 +235,25 @@ CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# ACPI (Advanced Configuration and Power Interface) Support -# +CONFIG_PM_SLEEP_SMP=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_SMP_POSSIBLE=y +CONFIG_SUSPEND=y +CONFIG_HIBERNATION_SMP_POSSIBLE=y +# CONFIG_HIBERNATION is not set CONFIG_ACPI=y +CONFIG_ACPI_SLEEP=y CONFIG_ACPI_PROCFS=y +CONFIG_ACPI_PROC_EVENT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set -# CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set @@ -254,11 +261,8 @@ CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y -# CONFIG_ACPI_CONTAINER is not set - -# -# APM (Advanced Power Management) BIOS Support -# +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_SBS is not set # CONFIG_APM is not set # @@ -279,6 +283,7 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y @@ -292,10 +297,6 @@ CONFIG_K8_NB=y # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -313,7 +314,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +345,7 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -374,7 +375,6 @@ CONFIG_NETFILTER_XTABLES=m # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set @@ -411,21 +411,8 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m - - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -451,7 +438,17 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -464,25 +461,10 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set @@ -492,10 +474,7 @@ CONFIG_PNP=y # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set @@ -508,23 +487,19 @@ CONFIG_PNPACPI=y # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=81920 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_SONY_LAPTOP is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_THINKPAD_ACPI is not set # CONFIG_IDE is not set # @@ -532,6 +507,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -553,6 +529,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -560,12 +537,8 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -617,20 +590,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set # @@ -644,41 +604,20 @@ CONFIG_SCSI_MULTI_LUN=y # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_MAC_EMUMOUSEBTN is not set - -# -# Network device support -# +# CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set - -# -# ARCnet devices -# # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -699,10 +638,6 @@ CONFIG_WD80x3=m CONFIG_ULTRA=m CONFIG_SMC9194=m # CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set CONFIG_TULIP=m @@ -763,10 +698,7 @@ CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y CONFIG_VIA_RHINE_NAPI=y CONFIG_SC92031=m - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y CONFIG_DL2K=m @@ -787,30 +719,31 @@ CONFIG_TIGON3=m CONFIG_BNX2=m CONFIG_QLA3XXX=m CONFIG_ATL1=m - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_MLX4_CORE is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -821,15 +754,7 @@ CONFIG_ATL1=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -837,6 +762,7 @@ CONFIG_ATL1=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -863,12 +789,20 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -898,6 +832,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 @@ -911,15 +846,7 @@ CONFIG_SERIAL_CORE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -941,8 +868,6 @@ CONFIG_AGP_SWORKS=m CONFIG_AGP_VIA=m CONFIG_AGP_EFFICEON=m # CONFIG_DRM is not set -# CONFIG_DRM_I830 is not set -# CONFIG_DRM_I915 is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_NSC_GPIO is not set @@ -950,16 +875,9 @@ CONFIG_AGP_EFFICEON=m # CONFIG_RAW_DRIVER is not set # CONFIG_HPET is not set # CONFIG_HANGCHECK_TIMER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -967,22 +885,16 @@ CONFIG_AGP_EFFICEON=m # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_ASIC3 is not set +# CONFIG_HTC_ASIC3_DS1WM is not set # # Multi-Function Devices @@ -995,28 +907,74 @@ CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_STRADIS is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VICAM is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set +# CONFIG_USB_DSBR is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # CONFIG_USB_DABUSB is not set # # Graphics support # # CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +CONFIG_VGASTATE=y +CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y -# CONFIG_FIRMWARE_EDID is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y -# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers @@ -1027,17 +985,16 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set -CONFIG_FB_VGA16=y -CONFIG_FB_VESA=y -# CONFIG_FB_VESA_STD is not set -CONFIG_FB_VESA_TNG=y -CONFIG_FB_VESA_DEFAULT_MODE="640x480-16@60" -CONFIG_VIDEO_SELECT=y +# CONFIG_FB_VGA16 is not set +CONFIG_FB_UVESA=m +# CONFIG_FB_VESA is not set +# CONFIG_FB_HECUBA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set +# CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set @@ -1050,8 +1007,11 @@ CONFIG_VIDEO_SELECT=y # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set @@ -1060,9 +1020,11 @@ CONFIG_VIDEO_SELECT=y # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y @@ -1075,18 +1037,11 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set CONFIG_LOGO_OHAND_CLUT224=y -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set # # Sound @@ -1173,6 +1128,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set @@ -1222,27 +1178,34 @@ CONFIG_SND_AC97_POWER_SAVE=y # # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set # -# SoC audio support +# System on Chip audio support # # CONFIG_SND_SOC is not set # -# Open Sound System +# SoC Audio support for SuperH # -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y # -# HID Devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y @@ -1253,8 +1216,10 @@ CONFIG_USB=y # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y +# CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # @@ -1264,7 +1229,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -1272,6 +1236,7 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers @@ -1290,41 +1255,10 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -CONFIG_USB_WACOM=y -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # @@ -1368,38 +1302,10 @@ CONFIG_USB_WACOM=y # USB Gadget Support # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# # CONFIG_EDAC is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # @@ -1414,15 +1320,13 @@ CONFIG_USB_WACOM=y # # DMA Devices # +CONFIG_VIRTUALIZATION=y +# CONFIG_KVM is not set # -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # -# CONFIG_KVM is not set +# CONFIG_UIO is not set # # File systems @@ -1431,7 +1335,13 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -1499,13 +1409,22 @@ CONFIG_RAMFS=y # Network File Systems # CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1561,10 +1480,7 @@ CONFIG_NLS_UTF8=y # Distributed Lock Manager # # CONFIG_DLM is not set - -# -# Instrumentation Support -# +CONFIG_INSTRUMENTATION=y CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_KPROBES is not set @@ -1580,8 +1496,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_TIMER_STATS=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_EARLY_PRINTK=y CONFIG_X86_FIND_SMP_CONFIG=y @@ -1593,10 +1507,6 @@ CONFIG_DOUBLEFAULT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m @@ -1616,6 +1526,7 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1636,10 +1547,7 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m @@ -1651,14 +1559,16 @@ CONFIG_CRYPTO_DEV_GEODE=m CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y -# CONFIG_LZO is not set CONFIG_ZLIB_INFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y @@ -1667,4 +1577,3 @@ CONFIG_X86_HT=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_TRAMPOLINE=y CONFIG_KTIME_SCALAR=y -# CONFIG_SHARPSL_RC is not set diff --git a/packages/linux/linux-rp-2.6.23/defconfig-c7x0 b/packages/linux/linux-rp-2.6.23/defconfig-c7x0 index 4f6b8d202d..f1d0295fb0 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-c7x0 +++ b/packages/linux/linux-rp-2.6.23/defconfig-c7x0 @@ -34,7 +34,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/packages/linux/linux-rp-2.6.23/defconfig-collie b/packages/linux/linux-rp-2.6.23/defconfig-collie index fd10d3df85..64e5090ae6 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-collie +++ b/packages/linux/linux-rp-2.6.23/defconfig-collie @@ -31,7 +31,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set diff --git a/packages/linux/linux-rp-2.6.23/defconfig-htcuniversal b/packages/linux/linux-rp-2.6.23/defconfig-htcuniversal index ead49c2c8a..3f33b1446f 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-htcuniversal +++ b/packages/linux/linux-rp-2.6.23/defconfig-htcuniversal @@ -34,7 +34,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/packages/linux/linux-rp-2.6.23/defconfig-hx2000 b/packages/linux/linux-rp-2.6.23/defconfig-hx2000 index 09ce9e5740..447d26da80 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-hx2000 +++ b/packages/linux/linux-rp-2.6.23/defconfig-hx2000 @@ -31,7 +31,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set diff --git a/packages/linux/linux-rp-2.6.23/defconfig-poodle b/packages/linux/linux-rp-2.6.23/defconfig-poodle index 210997df4a..5afa7c556b 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-poodle +++ b/packages/linux/linux-rp-2.6.23/defconfig-poodle @@ -34,7 +34,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/packages/linux/linux-rp-2.6.23/defconfig-qemuarm b/packages/linux/linux-rp-2.6.23/defconfig-qemuarm index c369657596..78f08bea40 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-qemuarm +++ b/packages/linux/linux-rp-2.6.23/defconfig-qemuarm @@ -32,7 +32,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/packages/linux/linux-rp-2.6.23/defconfig-qemux86 b/packages/linux/linux-rp-2.6.23/defconfig-qemux86 index c5e91d989f..62bbaceaf9 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-qemux86 +++ b/packages/linux/linux-rp-2.6.23/defconfig-qemux86 @@ -31,7 +31,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/packages/linux/linux-rp-2.6.23/defconfig-spitz b/packages/linux/linux-rp-2.6.23/defconfig-spitz index a4e849cba2..d3512f2a4b 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-spitz +++ b/packages/linux/linux-rp-2.6.23/defconfig-spitz @@ -34,7 +34,7 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/packages/linux/linux-rp-2.6.23/defconfig-tosa b/packages/linux/linux-rp-2.6.23/defconfig-tosa index 5173e242a8..d005193a34 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-tosa +++ b/packages/linux/linux-rp-2.6.23/defconfig-tosa @@ -21,7 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set diff --git a/packages/linux/linux-rp-2.6.23/defconfig-zylonite b/packages/linux/linux-rp-2.6.23/defconfig-zylonite index 8be4a3bd47..d98974989f 100644 --- a/packages/linux/linux-rp-2.6.23/defconfig-zylonite +++ b/packages/linux/linux-rp-2.6.23/defconfig-zylonite @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Tue Sep 25 15:57:10 2007 +# Linux kernel version: 2.6.23 +# Mon Feb 18 01:42:46 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -33,7 +33,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -65,7 +65,6 @@ CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -262,6 +261,7 @@ CONFIG_BINFMT_ELF=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # # Networking @@ -272,6 +272,7 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=m +# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -304,6 +305,7 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -370,7 +372,6 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m - # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -551,6 +552,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set +CONFIG_MTD_NAND_ZYLONITE=y # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ONENAND is not set @@ -727,11 +729,13 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ZYLONITE=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -964,11 +968,8 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_LOGO_OHAND_CLUT224 is not set -# CONFIG_LOGO_OZ240_CLUT224 is not set -# CONFIG_LOGO_OZ480_CLUT224 is not set -# CONFIG_LOGO_OZ640_CLUT224 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_LOGO_OHAND_CLUT224=y # # Sound @@ -1237,7 +1238,13 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set diff --git a/packages/linux/linux-rp-2.6.23/zylonite_keypad-r0.patch b/packages/linux/linux-rp-2.6.23/zylonite_keypad-r0.patch new file mode 100644 index 0000000000..1889b3884e --- /dev/null +++ b/packages/linux/linux-rp-2.6.23/zylonite_keypad-r0.patch @@ -0,0 +1,1187 @@ +Eric Miao's pxa keypad patchset backport. +--- + arch/arm/mach-pxa/devices.h | 1 + arch/arm/mach-pxa/generic.c | 31 + + arch/arm/mach-pxa/pxa27x.c | 2 + arch/arm/mach-pxa/pxa300.c | 6 + arch/arm/mach-pxa/pxa3xx.c | 1 + arch/arm/mach-pxa/zylonite.c | 68 +++ + drivers/input/keyboard/Kconfig | 8 + drivers/input/keyboard/Makefile | 2 + drivers/input/keyboard/pxa27x_keyboard.c | 273 ------------- + drivers/input/keyboard/pxa27x_keypad.c | 575 +++++++++++++++++++++++++++++ + include/asm-arm/arch-pxa/irqs.h | 2 + include/asm-arm/arch-pxa/pxa27x_keyboard.h | 13 + include/asm-arm/arch-pxa/pxa27x_keypad.h | 58 ++ + 13 files changed, 745 insertions(+), 295 deletions(-) + +Index: linux-2.6.23-z-input/drivers/input/keyboard/Kconfig +=================================================================== +--- linux-2.6.23-z-input.orig/drivers/input/keyboard/Kconfig 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/drivers/input/keyboard/Kconfig 2008-02-18 01:43:28.000000000 +0100 +@@ -218,13 +218,13 @@ + module will be called omap-keypad. + + config KEYBOARD_PXA27x +- tristate "PXA27x keyboard support" +- depends on PXA27x ++ tristate "PXA27x/PXA3xx keypad support" ++ depends on PXA27x || PXA3xx + help +- Enable support for PXA27x matrix keyboard controller ++ Enable support for PXA27x/PXA3xx keypad controller + + To compile this driver as a module, choose M here: the +- module will be called pxa27x_keyboard. ++ module will be called pxa27x_keypad. + + config KEYBOARD_AAED2000 + tristate "AAED-2000 keyboard" +Index: linux-2.6.23-z-input/drivers/input/keyboard/Makefile +=================================================================== +--- linux-2.6.23-z-input.orig/drivers/input/keyboard/Makefile 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/drivers/input/keyboard/Makefile 2008-02-18 01:43:28.000000000 +0100 +@@ -18,7 +18,7 @@ + obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o + obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o + obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o +-obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keyboard.o ++obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o + obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o + obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o + obj-$(CONFIG_KEYBOARD_ASIC3) += asic3_keys.o +Index: linux-2.6.23-z-input/drivers/input/keyboard/pxa27x_keypad.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23-z-input/drivers/input/keyboard/pxa27x_keypad.c 2008-02-19 01:40:04.000000000 +0100 +@@ -0,0 +1,575 @@ ++/* ++ * linux/drivers/input/keyboard/pxa27x_keypad.c ++ * ++ * Driver for the pxa27x matrix keyboard controller. ++ * ++ * Created: Feb 22, 2007 ++ * Author: Rodolfo Giometti <giometti@linux.it> ++ * ++ * Based on a previous implementations by Kevin O'Connor ++ * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and ++ * on some suggestions by Nicolas Pitre <nico@cam.org>. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <linux/input.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++ ++#include <asm/mach-types.h> ++#include <asm/mach/arch.h> ++#include <asm/mach/map.h> ++ ++#include <asm/arch/hardware.h> ++#include <asm/arch/mfp.h> ++#include <asm/arch/pxa27x_keypad.h> ++ ++#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG)) ++ ++/* ++ * Keypad Controller registers ++ */ ++#define KPC 0x0000 /* Keypad Control register */ ++#define KPDK 0x0008 /* Keypad Direct Key register */ ++#define KPREC 0x0010 /* Keypad Rotary Encoder register */ ++#define KPMK 0x0018 /* Keypad Matrix Key register */ ++#define KPAS 0x0020 /* Keypad Automatic Scan register */ ++ ++/* Keypad Automatic Scan Multiple Key Presser register 0-3 */ ++#define KPASMKP0 0x0028 ++#define KPASMKP1 0x0030 ++#define KPASMKP2 0x0038 ++#define KPASMKP3 0x0040 ++#define KPKDI 0x0048 ++ ++/* bit definitions */ ++#define KPC_MKRN(n) ((((n) - 1) & 0x7) << 26) /* matrix key row number */ ++#define KPC_MKCN(n) ((((n) - 1) & 0x7) << 23) /* matrix key column number */ ++#define KPC_DKN(n) ((((n) - 1) & 0x7) << 6) /* direct key number */ ++ ++#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ ++#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ ++#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ ++#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ ++ ++#define KPC_MS(n) (0x1 << (13 + (n))) /* Matrix scan line 'n' */ ++#define KPC_MS_ALL (0xff << 13) ++ ++#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ ++#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ ++#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ ++#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ ++#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ ++#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ ++#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ ++#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ ++#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ ++ ++#define KPDK_DKP (0x1 << 31) ++#define KPDK_DK(n) ((n) & 0xff) ++ ++#define KPREC_OF1 (0x1 << 31) ++#define kPREC_UF1 (0x1 << 30) ++#define KPREC_OF0 (0x1 << 15) ++#define KPREC_UF0 (0x1 << 14) ++ ++#define KPREC_RECOUNT0(n) ((n) & 0xff) ++#define KPREC_RECOUNT1(n) (((n) >> 16) & 0xff) ++ ++#define KPMK_MKP (0x1 << 31) ++#define KPAS_SO (0x1 << 31) ++#define KPASMKPx_SO (0x1 << 31) ++ ++#define KPAS_MUKP(n) (((n) >> 26) & 0x1f) ++#define KPAS_RP(n) (((n) >> 4) & 0xf) ++#define KPAS_CP(n) ((n) & 0xf) ++ ++#define KPASMKP_MKC_MASK (0xff) ++ ++#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off)) ++#define keypad_writel(off, v) __raw_writel((v), keypad->mmio_base + (off)) ++ ++#define MAX_MATRIX_KEY_NUM (8 * 8) ++ ++struct pxa27x_keypad { ++ struct pxa27x_keypad_platform_data *pdata; ++ ++ struct clk *clk; ++ struct input_dev *input_dev; ++ void __iomem *mmio_base; ++ ++ /* matrix key code map */ ++ unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM]; ++ ++ /* state row bits of each column scan */ ++ uint32_t matrix_key_state[MAX_MATRIX_KEY_COLS]; ++ uint32_t direct_key_state; ++ ++ unsigned int direct_key_mask; ++ ++ int rotary_rel_code[2]; ++ int rotary_up_key[2]; ++ int rotary_down_key[2]; ++}; ++ ++static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) ++{ ++ struct pxa27x_keypad_platform_data *pdata = keypad->pdata; ++ struct input_dev *input_dev = keypad->input_dev; ++ unsigned int *key; ++ int i; ++ ++ key = &pdata->matrix_key_map[0]; ++ for (i = 0; i < pdata->matrix_key_map_size; i++, key++) { ++ int row = ((*key) >> 28) & 0xf; ++ int col = ((*key) >> 24) & 0xf; ++ int code = (*key) & 0xffffff; ++ ++ keypad->matrix_keycodes[(row << 3) + col] = code; ++ set_bit(code, input_dev->keybit); ++ } ++ ++ keypad->rotary_up_key[0] = pdata->rotary0_up_key; ++ keypad->rotary_up_key[1] = pdata->rotary1_up_key; ++ keypad->rotary_down_key[0] = pdata->rotary0_down_key; ++ keypad->rotary_down_key[1] = pdata->rotary1_down_key; ++ keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; ++ keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; ++ ++ if (pdata->rotary0_up_key && pdata->rotary0_down_key) { ++ set_bit(pdata->rotary0_up_key, input_dev->keybit); ++ set_bit(pdata->rotary0_down_key, input_dev->keybit); ++ } else ++ set_bit(pdata->rotary0_rel_code, input_dev->relbit); ++ ++ if (pdata->rotary1_up_key && pdata->rotary1_down_key) { ++ set_bit(pdata->rotary1_up_key, input_dev->keybit); ++ set_bit(pdata->rotary1_down_key, input_dev->keybit); ++ } else ++ set_bit(pdata->rotary1_rel_code, input_dev->relbit); ++} ++ ++static inline unsigned int lookup_matrix_keycode( ++ struct pxa27x_keypad *keypad, int row, int col) ++{ ++ return keypad->matrix_keycodes[(row << 3) + col]; ++} ++ ++static void pxa27x_keypad_scan_matrix(struct pxa27x_keypad *keypad) ++{ ++ struct pxa27x_keypad_platform_data *pdata = keypad->pdata; ++ int row, col, num_keys_pressed = 0; ++ uint32_t new_state[MAX_MATRIX_KEY_COLS]; ++ uint32_t kpas = keypad_readl(KPAS); ++ ++ num_keys_pressed = KPAS_MUKP(kpas); ++ ++ memset(new_state, 0, sizeof(new_state)); ++ ++ if (num_keys_pressed == 0) ++ goto scan; ++ ++ if (num_keys_pressed == 1) { ++ col = KPAS_CP(kpas); ++ row = KPAS_RP(kpas); ++ ++ /* if invalid row/col, treat as no key pressed */ ++ if (col >= pdata->matrix_key_cols || ++ row >= pdata->matrix_key_rows) ++ goto scan; ++ ++ new_state[col] = (1 << row); ++ goto scan; ++ } ++ ++ if (num_keys_pressed > 1) { ++ uint32_t kpasmkp0 = keypad_readl(KPASMKP0); ++ uint32_t kpasmkp1 = keypad_readl(KPASMKP1); ++ uint32_t kpasmkp2 = keypad_readl(KPASMKP2); ++ uint32_t kpasmkp3 = keypad_readl(KPASMKP3); ++ ++ new_state[0] = kpasmkp0 & KPASMKP_MKC_MASK; ++ new_state[1] = (kpasmkp0 >> 16) & KPASMKP_MKC_MASK; ++ new_state[2] = kpasmkp1 & KPASMKP_MKC_MASK; ++ new_state[3] = (kpasmkp1 >> 16) & KPASMKP_MKC_MASK; ++ new_state[4] = kpasmkp2 & KPASMKP_MKC_MASK; ++ new_state[5] = (kpasmkp2 >> 16) & KPASMKP_MKC_MASK; ++ new_state[6] = kpasmkp3 & KPASMKP_MKC_MASK; ++ new_state[7] = (kpasmkp3 >> 16) & KPASMKP_MKC_MASK; ++ } ++scan: ++ for (col = 0; col < pdata->matrix_key_cols; col++) { ++ uint32_t bits_changed; ++ ++ bits_changed = keypad->matrix_key_state[col] ^ new_state[col]; ++ if (bits_changed == 0) ++ continue; ++ ++ for (row = 0; row < pdata->matrix_key_rows; row++) { ++ if ((bits_changed & (1 << row)) == 0) ++ continue; ++ ++ input_report_key(keypad->input_dev, ++ lookup_matrix_keycode(keypad, row, col), ++ new_state[col] & (1 << row)); ++ } ++ } ++ input_sync(keypad->input_dev); ++ memcpy(keypad->matrix_key_state, new_state, sizeof(new_state)); ++} ++ ++#define DEFAULT_KPREC (0x007f007f) ++ ++static inline int rotary_delta(uint32_t kprec) ++{ ++ if (kprec & KPREC_OF0) ++ return (kprec & 0xff) + 0x7f; ++ else if (kprec & KPREC_UF0) ++ return (kprec & 0xff) - 0x7f - 0xff; ++ else ++ return (kprec & 0xff) - 0x7f; ++} ++ ++static void report_rotary_event(struct pxa27x_keypad *keypad, int r, int delta) ++{ ++ struct input_dev *dev = keypad->input_dev; ++ ++ if (delta == 0) ++ return; ++ ++ if (keypad->rotary_up_key[r] && keypad->rotary_down_key[r]) { ++ int keycode = (delta > 0) ? keypad->rotary_up_key[r] : ++ keypad->rotary_down_key[r]; ++ ++ /* simulate a press-n-release */ ++ input_report_key(dev, keycode, 1); ++ input_sync(dev); ++ input_report_key(dev, keycode, 0); ++ input_sync(dev); ++ } else { ++ input_report_rel(dev, keypad->rotary_rel_code[r], delta); ++ input_sync(dev); ++ } ++} ++ ++static void pxa27x_keypad_scan_rotary(struct pxa27x_keypad *keypad) ++{ ++ struct pxa27x_keypad_platform_data *pdata = keypad->pdata; ++ uint32_t kprec; ++ ++ /* read and reset to default count value */ ++ kprec = keypad_readl(KPREC); ++ keypad_writel(KPREC, DEFAULT_KPREC); ++ ++ if (pdata->enable_rotary0) ++ report_rotary_event(keypad, 0, rotary_delta(kprec)); ++ ++ if (pdata->enable_rotary1) ++ report_rotary_event(keypad, 1, rotary_delta(kprec >> 16)); ++} ++ ++static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad) ++{ ++ struct pxa27x_keypad_platform_data *pdata = keypad->pdata; ++ unsigned int new_state; ++ uint32_t kpdk, bits_changed; ++ int i; ++ ++ kpdk = keypad_readl(KPDK); ++ ++ if (pdata->enable_rotary0 || pdata->enable_rotary1) ++ pxa27x_keypad_scan_rotary(keypad); ++ ++ if (pdata->direct_key_map == NULL) ++ return; ++ ++ new_state = KPDK_DK(kpdk) & keypad->direct_key_mask; ++ bits_changed = keypad->direct_key_state ^ new_state; ++ ++ if (bits_changed == 0) ++ return; ++ ++ for (i = 0; i < pdata->direct_key_num; i++) { ++ if (bits_changed & (1 << i)) ++ input_report_key(keypad->input_dev, ++ pdata->direct_key_map[i], ++ (new_state & (1 << i))); ++ } ++ input_sync(keypad->input_dev); ++ keypad->direct_key_state = new_state; ++} ++ ++static irqreturn_t pxa27x_keypad_irq_handler(int irq, void *dev_id) ++{ ++ struct pxa27x_keypad *keypad = dev_id; ++ unsigned long kpc = keypad_readl(KPC); ++ ++ if (kpc & KPC_DI) ++ pxa27x_keypad_scan_direct(keypad); ++ ++ if (kpc & KPC_MI) ++ pxa27x_keypad_scan_matrix(keypad); ++ ++ return IRQ_HANDLED; ++} ++ ++static void pxa27x_keypad_config(struct pxa27x_keypad *keypad) ++{ ++ struct pxa27x_keypad_platform_data *pdata = keypad->pdata; ++ unsigned int mask = 0, direct_key_num = 0; ++ unsigned long kpc = 0; ++ ++ /* enable matrix keys with automatic scan */ ++ if (pdata->matrix_key_rows && pdata->matrix_key_cols) { ++ kpc |= KPC_ASACT | KPC_MIE | KPC_ME | KPC_MS_ALL; ++ kpc |= KPC_MKRN(pdata->matrix_key_rows) | ++ KPC_MKCN(pdata->matrix_key_cols); ++ } ++ ++ /* enable rotary key, debounce interval same as direct keys */ ++ if (pdata->enable_rotary0) { ++ mask |= 0x03; ++ direct_key_num = 2; ++ kpc |= KPC_REE0; ++ } ++ ++ if (pdata->enable_rotary1) { ++ mask |= 0x0c; ++ direct_key_num = 4; ++ kpc |= KPC_REE1; ++ } ++ ++ if (pdata->direct_key_num > direct_key_num) ++ direct_key_num = pdata->direct_key_num; ++ ++ keypad->direct_key_mask = ((2 << direct_key_num) - 1) & ~mask; ++ ++ /* enable direct key */ ++ if (direct_key_num) ++ kpc |= KPC_DE | KPC_DIE | KPC_DKN(direct_key_num); ++ ++ keypad_writel(KPC, kpc | KPC_RE_ZERO_DEB); ++ keypad_writel(KPREC, DEFAULT_KPREC); ++ keypad_writel(KPKDI, pdata->debounce_interval); ++} ++ ++static int pxa27x_keypad_open(struct input_dev *dev) ++{ ++ struct pxa27x_keypad *keypad = input_get_drvdata(dev); ++ ++ /* Enable unit clock */ ++ clk_enable(keypad->clk); ++ pxa27x_keypad_config(keypad); ++ ++ return 0; ++} ++ ++static void pxa27x_keypad_close(struct input_dev *dev) ++{ ++ struct pxa27x_keypad *keypad = input_get_drvdata(dev); ++ ++ /* Disable clock unit */ ++ clk_disable(keypad->clk); ++} ++ ++#ifdef CONFIG_PM ++static int pxa27x_keypad_suspend(struct platform_device *pdev, pm_message_t state) ++{ ++ struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); ++ ++ clk_disable(keypad->clk); ++ return 0; ++} ++ ++static int pxa27x_keypad_resume(struct platform_device *pdev) ++{ ++ struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); ++ struct input_dev *input_dev = keypad->input_dev; ++ ++ mutex_lock(&input_dev->mutex); ++ ++ if (input_dev->users) { ++ /* Enable unit clock */ ++ clk_enable(keypad->clk); ++ pxa27x_keypad_config(keypad); ++ } ++ ++ mutex_unlock(&input_dev->mutex); ++ ++ return 0; ++} ++#else ++#define pxa27x_keypad_suspend NULL ++#define pxa27x_keypad_resume NULL ++#endif ++ ++#define res_size(res) ((res)->end - (res)->start + 1) ++ ++static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) ++{ ++ struct pxa27x_keypad *keypad; ++ struct input_dev *input_dev; ++ struct resource *res; ++ int irq, error; ++ ++ keypad = kzalloc(sizeof(struct pxa27x_keypad), GFP_KERNEL); ++ if (keypad == NULL) { ++ dev_err(&pdev->dev, "failed to allocate driver data\n"); ++ return -ENOMEM; ++ } ++ ++ keypad->pdata = pdev->dev.platform_data; ++ if (keypad->pdata == NULL) { ++ dev_err(&pdev->dev, "no platform data defined\n"); ++ error = -EINVAL; ++ goto failed_free; ++ } ++ ++ irq = platform_get_irq(pdev, 0); ++ if (irq < 0) { ++ dev_err(&pdev->dev, "failed to get keypad irq\n"); ++ error = -ENXIO; ++ goto failed_free; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res == NULL) { ++ dev_err(&pdev->dev, "failed to get I/O memory\n"); ++ error = -ENXIO; ++ goto failed_free; ++ } ++ ++ res = request_mem_region(res->start, res_size(res), pdev->name); ++ if (res == NULL) { ++ dev_err(&pdev->dev, "failed to request I/O memory\n"); ++ error = -EBUSY; ++ goto failed_free; ++ } ++ ++ keypad->mmio_base = ioremap(res->start, res_size(res)); ++ if (keypad->mmio_base == NULL) { ++ dev_err(&pdev->dev, "failed to remap I/O memory\n"); ++ error = -ENXIO; ++ goto failed_free_mem; ++ } ++ ++ keypad->clk = clk_get(&pdev->dev, "KBDCLK"); ++ if (IS_ERR(keypad->clk)) { ++ dev_err(&pdev->dev, "failed to get keypad clock\n"); ++ error = PTR_ERR(keypad->clk); ++ goto failed_free_io; ++ } ++ ++ /* Create and register the input driver. */ ++ input_dev = input_allocate_device(); ++ if (!input_dev) { ++ dev_err(&pdev->dev, "failed to allocate input device\n"); ++ error = -ENOMEM; ++ goto failed_put_clk; ++ } ++ ++ input_dev->name = pdev->name; ++ input_dev->id.bustype = BUS_HOST; ++ input_dev->open = pxa27x_keypad_open; ++ input_dev->close = pxa27x_keypad_close; ++ input_dev->dev.parent = &pdev->dev; ++ ++ keypad->input_dev = input_dev; ++ input_set_drvdata(input_dev, keypad); ++ ++ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | ++ BIT_MASK(EV_REL); ++ ++ pxa27x_keypad_build_keycode(keypad); ++ platform_set_drvdata(pdev, keypad); ++ ++ error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED, ++ pdev->name, keypad); ++ if (error) { ++ dev_err(&pdev->dev, "failed to request IRQ\n"); ++ goto failed_free_dev; ++ } ++ ++ /* Register the input device */ ++ error = input_register_device(input_dev); ++ if (error) { ++ dev_err(&pdev->dev, "failed to register input device\n"); ++ goto failed_free_irq; ++ } ++ ++ return 0; ++ ++failed_free_irq: ++ free_irq(irq, pdev); ++ platform_set_drvdata(pdev, NULL); ++failed_free_dev: ++ input_free_device(input_dev); ++failed_put_clk: ++ clk_put(keypad->clk); ++failed_free_io: ++ iounmap(keypad->mmio_base); ++failed_free_mem: ++ release_mem_region(res->start, res_size(res)); ++failed_free: ++ kfree(keypad); ++ return error; ++} ++ ++static int __devexit pxa27x_keypad_remove(struct platform_device *pdev) ++{ ++ struct pxa27x_keypad *keypad = platform_get_drvdata(pdev); ++ struct resource *res; ++ ++ free_irq(platform_get_irq(pdev, 0), pdev); ++ ++ clk_disable(keypad->clk); ++ clk_put(keypad->clk); ++ ++ input_unregister_device(keypad->input_dev); ++ input_free_device(keypad->input_dev); ++ ++ iounmap(keypad->mmio_base); ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ release_mem_region(res->start, res_size(res)); ++ ++ platform_set_drvdata(pdev, NULL); ++ kfree(keypad); ++ return 0; ++} ++ ++static struct platform_driver pxa27x_keypad_driver = { ++ .probe = pxa27x_keypad_probe, ++ .remove = __devexit_p(pxa27x_keypad_remove), ++ .suspend = pxa27x_keypad_suspend, ++ .resume = pxa27x_keypad_resume, ++ .driver = { ++ .name = "pxa27x-keypad", ++ }, ++}; ++ ++static int __init pxa27x_keypad_init(void) ++{ ++ return platform_driver_register(&pxa27x_keypad_driver); ++} ++ ++static void __exit pxa27x_keypad_exit(void) ++{ ++ platform_driver_unregister(&pxa27x_keypad_driver); ++} ++ ++module_init(pxa27x_keypad_init); ++module_exit(pxa27x_keypad_exit); ++ ++MODULE_DESCRIPTION("PXA27x Keypad Controller Driver"); ++MODULE_LICENSE("GPL"); +Index: linux-2.6.23-z-input/include/asm-arm/arch-pxa/pxa27x_keyboard.h +=================================================================== +--- linux-2.6.23-z-input.orig/include/asm-arm/arch-pxa/pxa27x_keyboard.h 2007-10-09 22:31:38.000000000 +0200 ++++ /dev/null 1970-01-01 00:00:00.000000000 +0000 +@@ -1,13 +0,0 @@ +-#define PXAKBD_MAXROW 8 +-#define PXAKBD_MAXCOL 8 +- +-struct pxa27x_keyboard_platform_data { +- int nr_rows, nr_cols; +- int keycodes[PXAKBD_MAXROW][PXAKBD_MAXCOL]; +- int gpio_modes[PXAKBD_MAXROW + PXAKBD_MAXCOL]; +- +-#ifdef CONFIG_PM +- u32 reg_kpc; +- u32 reg_kprec; +-#endif +-}; +Index: linux-2.6.23-z-input/include/asm-arm/arch-pxa/pxa27x_keypad.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23-z-input/include/asm-arm/arch-pxa/pxa27x_keypad.h 2008-02-18 01:43:28.000000000 +0100 +@@ -0,0 +1,58 @@ ++#ifndef __ASM_ARCH_PXA27x_KEYPAD_H ++#define __ASM_ARCH_PXA27x_KEYPAD_H ++ ++#include <linux/input.h> ++ ++#define MAX_MATRIX_KEY_ROWS (8) ++#define MAX_MATRIX_KEY_COLS (8) ++ ++/* pxa3xx keypad platform specific parameters ++ * ++ * NOTE: ++ * 1. direct_key_num indicates the number of keys in the direct keypad ++ * _plus_ the number of rotary-encoder sensor inputs, this can be ++ * left as 0 if only rotary encoders are enabled, the driver will ++ * automatically calculate this ++ * ++ * 2. direct_key_map is the key code map for the direct keys, if rotary ++ * encoder(s) are enabled, direct key 0/1(2/3) will be ignored ++ * ++ * 3. rotary can be either interpreted as a relative input event (e.g. ++ * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) ++ * ++ * 4. matrix key and direct key will use the same debounce_interval by ++ * default, which should be sufficient in most cases ++ */ ++struct pxa27x_keypad_platform_data { ++ ++ /* code map for the matrix keys */ ++ unsigned int matrix_key_rows; ++ unsigned int matrix_key_cols; ++ unsigned int *matrix_key_map; ++ int matrix_key_map_size; ++ ++ /* direct keys */ ++ int direct_key_num; ++ unsigned int direct_key_map[8]; ++ ++ /* rotary encoders 0 */ ++ int enable_rotary0; ++ int rotary0_rel_code; ++ int rotary0_up_key; ++ int rotary0_down_key; ++ ++ /* rotary encoders 1 */ ++ int enable_rotary1; ++ int rotary1_rel_code; ++ int rotary1_up_key; ++ int rotary1_down_key; ++ ++ /* key debounce interval */ ++ unsigned int debounce_interval; ++}; ++ ++#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) ++ ++extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); ++ ++#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ +Index: linux-2.6.23-z-input/drivers/input/keyboard/pxa27x_keyboard.c +=================================================================== +--- linux-2.6.23-z-input.orig/drivers/input/keyboard/pxa27x_keyboard.c 2008-02-18 01:43:28.000000000 +0100 ++++ /dev/null 1970-01-01 00:00:00.000000000 +0000 +@@ -1,273 +0,0 @@ +-/* +- * linux/drivers/input/keyboard/pxa27x_keyboard.c +- * +- * Driver for the pxa27x matrix keyboard controller. +- * +- * Created: Feb 22, 2007 +- * Author: Rodolfo Giometti <giometti@linux.it> +- * +- * Based on a previous implementations by Kevin O'Connor +- * <kevin_at_koconnor.net> and Alex Osborne <bobofdoom@gmail.com> and +- * on some suggestions by Nicolas Pitre <nico@cam.org>. +- * +- * This program is free software; you can redistribute it and/or modify +- * it under the terms of the GNU General Public License version 2 as +- * published by the Free Software Foundation. +- */ +- +- +-#include <linux/kernel.h> +-#include <linux/module.h> +-#include <linux/init.h> +-#include <linux/interrupt.h> +-#include <linux/input.h> +-#include <linux/device.h> +-#include <linux/platform_device.h> +-#include <linux/clk.h> +-#include <linux/err.h> +- +-#include <asm/mach-types.h> +-#include <asm/mach/arch.h> +-#include <asm/mach/map.h> +- +-#include <asm/arch/hardware.h> +-#include <asm/arch/pxa-regs.h> +-#include <asm/arch/irqs.h> +-#include <asm/arch/pxa27x_keyboard.h> +- +-#define DRIVER_NAME "pxa27x-keyboard" +- +-#define KPASMKP(col) (col/2 == 0 ? KPASMKP0 : \ +- col/2 == 1 ? KPASMKP1 : \ +- col/2 == 2 ? KPASMKP2 : KPASMKP3) +-#define KPASMKPx_MKC(row, col) (1 << (row + 16 * (col % 2))) +- +-static struct clk *pxakbd_clk; +- +-static irqreturn_t pxakbd_irq_handler(int irq, void *dev_id) +-{ +- struct platform_device *pdev = dev_id; +- struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; +- struct input_dev *input_dev = platform_get_drvdata(pdev); +- unsigned long kpc = KPC; +- int p, row, col, rel; +- +- if (kpc & KPC_DI) { +- unsigned long kpdk = KPDK; +- +- if (!(kpdk & KPDK_DKP)) { +- /* better luck next time */ +- } else if (kpc & KPC_REE0) { +- unsigned long kprec = KPREC; +- KPREC = 0x7f; +- +- if (kprec & KPREC_OF0) +- rel = (kprec & 0xff) + 0x7f; +- else if (kprec & KPREC_UF0) +- rel = (kprec & 0xff) - 0x7f - 0xff; +- else +- rel = (kprec & 0xff) - 0x7f; +- +- if (rel) { +- input_report_rel(input_dev, REL_WHEEL, rel); +- input_sync(input_dev); +- } +- } +- } +- +- if (kpc & KPC_MI) { +- /* report the status of every button */ +- for (row = 0; row < pdata->nr_rows; row++) { +- for (col = 0; col < pdata->nr_cols; col++) { +- p = KPASMKP(col) & KPASMKPx_MKC(row, col) ? +- 1 : 0; +- pr_debug("keycode %x - pressed %x\n", +- pdata->keycodes[row][col], p); +- input_report_key(input_dev, +- pdata->keycodes[row][col], p); +- } +- } +- input_sync(input_dev); +- } +- +- return IRQ_HANDLED; +-} +- +-static int pxakbd_open(struct input_dev *dev) +-{ +- /* Set keypad control register */ +- KPC |= (KPC_ASACT | +- KPC_MS_ALL | +- (2 << 6) | KPC_REE0 | KPC_DK_DEB_SEL | +- KPC_ME | KPC_MIE | KPC_DE | KPC_DIE); +- +- KPC &= ~KPC_AS; /* disable automatic scan */ +- KPC &= ~KPC_IMKP; /* do not ignore multiple keypresses */ +- +- /* Set rotary count to mid-point value */ +- KPREC = 0x7F; +- +- /* Enable unit clock */ +- clk_enable(pxakbd_clk); +- +- return 0; +-} +- +-static void pxakbd_close(struct input_dev *dev) +-{ +- /* Disable clock unit */ +- clk_disable(pxakbd_clk); +-} +- +-#ifdef CONFIG_PM +-static int pxakbd_suspend(struct platform_device *pdev, pm_message_t state) +-{ +- struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; +- +- /* Save controller status */ +- pdata->reg_kpc = KPC; +- pdata->reg_kprec = KPREC; +- +- return 0; +-} +- +-static int pxakbd_resume(struct platform_device *pdev) +-{ +- struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; +- struct input_dev *input_dev = platform_get_drvdata(pdev); +- +- mutex_lock(&input_dev->mutex); +- +- if (input_dev->users) { +- /* Restore controller status */ +- KPC = pdata->reg_kpc; +- KPREC = pdata->reg_kprec; +- +- /* Enable unit clock */ +- clk_disable(pxakbd_clk); +- clk_enable(pxakbd_clk); +- } +- +- mutex_unlock(&input_dev->mutex); +- +- return 0; +-} +-#else +-#define pxakbd_suspend NULL +-#define pxakbd_resume NULL +-#endif +- +-static int __devinit pxakbd_probe(struct platform_device *pdev) +-{ +- struct pxa27x_keyboard_platform_data *pdata = pdev->dev.platform_data; +- struct input_dev *input_dev; +- int i, row, col, error; +- +- pxakbd_clk = clk_get(&pdev->dev, "KBDCLK"); +- if (IS_ERR(pxakbd_clk)) { +- error = PTR_ERR(pxakbd_clk); +- goto err_clk; +- } +- +- /* Create and register the input driver. */ +- input_dev = input_allocate_device(); +- if (!input_dev) { +- printk(KERN_ERR "Cannot request keypad device\n"); +- error = -ENOMEM; +- goto err_alloc; +- } +- +- input_dev->name = DRIVER_NAME; +- input_dev->id.bustype = BUS_HOST; +- input_dev->open = pxakbd_open; +- input_dev->close = pxakbd_close; +- input_dev->dev.parent = &pdev->dev; +- +- input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL); +- input_dev->relbit[LONG(REL_WHEEL)] = BIT(REL_WHEEL); +- for (row = 0; row < pdata->nr_rows; row++) { +- for (col = 0; col < pdata->nr_cols; col++) { +- int code = pdata->keycodes[row][col]; +- if (code > 0) +- set_bit(code, input_dev->keybit); +- } +- } +- +- error = request_irq(IRQ_KEYPAD, pxakbd_irq_handler, IRQF_DISABLED, +- DRIVER_NAME, pdev); +- if (error) { +- printk(KERN_ERR "Cannot request keypad IRQ\n"); +- goto err_free_dev; +- } +- +- platform_set_drvdata(pdev, input_dev); +- +- /* Register the input device */ +- error = input_register_device(input_dev); +- if (error) +- goto err_free_irq; +- +- /* Setup GPIOs. */ +- for (i = 0; i < pdata->nr_rows + pdata->nr_cols; i++) +- pxa_gpio_mode(pdata->gpio_modes[i]); +- +- /* +- * Store rows/cols info into keyboard registers. +- */ +- +- KPC |= (pdata->nr_rows - 1) << 26; +- KPC |= (pdata->nr_cols - 1) << 23; +- +- for (col = 0; col < pdata->nr_cols; col++) +- KPC |= KPC_MS0 << col; +- +- return 0; +- +- err_free_irq: +- platform_set_drvdata(pdev, NULL); +- free_irq(IRQ_KEYPAD, pdev); +- err_free_dev: +- input_free_device(input_dev); +- err_alloc: +- clk_put(pxakbd_clk); +- err_clk: +- return error; +-} +- +-static int __devexit pxakbd_remove(struct platform_device *pdev) +-{ +- struct input_dev *input_dev = platform_get_drvdata(pdev); +- +- input_unregister_device(input_dev); +- free_irq(IRQ_KEYPAD, pdev); +- clk_put(pxakbd_clk); +- platform_set_drvdata(pdev, NULL); +- +- return 0; +-} +- +-static struct platform_driver pxakbd_driver = { +- .probe = pxakbd_probe, +- .remove = __devexit_p(pxakbd_remove), +- .suspend = pxakbd_suspend, +- .resume = pxakbd_resume, +- .driver = { +- .name = DRIVER_NAME, +- }, +-}; +- +-static int __init pxakbd_init(void) +-{ +- return platform_driver_register(&pxakbd_driver); +-} +- +-static void __exit pxakbd_exit(void) +-{ +- platform_driver_unregister(&pxakbd_driver); +-} +- +-module_init(pxakbd_init); +-module_exit(pxakbd_exit); +- +-MODULE_DESCRIPTION("PXA27x Matrix Keyboard Driver"); +-MODULE_LICENSE("GPL"); +Index: linux-2.6.23-z-input/arch/arm/mach-pxa/zylonite.c +=================================================================== +--- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/zylonite.c 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/arch/arm/mach-pxa/zylonite.c 2008-02-19 01:31:33.000000000 +0100 +@@ -25,6 +25,7 @@ + #include <asm/arch/gpio.h> + #include <asm/arch/pxafb.h> + #include <asm/arch/zylonite.h> ++#include <asm/arch/pxa27x_keypad.h> + + #include "generic.h" + +@@ -173,6 +174,72 @@ + static inline void zylonite_init_lcd(void) {} + #endif + ++#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES) ++static unsigned int zylonite_matrix_key_map[] = { ++ /* KEY(row, col, key_code) */ ++ KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D), ++ KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H), ++ KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L), ++ KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P), ++ KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T), ++ KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X), ++ KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z), ++ ++ KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3), ++ KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7), ++ KEY(4, 3, KEY_8), KEY(3, 4, KEY_9), ++ ++ KEY(4, 5, KEY_SPACE), ++ KEY(5, 3, KEY_KPASTERISK), /* * */ ++ KEY(5, 4, KEY_KPDOT), /* #" */ ++ ++ KEY(0, 7, KEY_UP), ++ KEY(1, 7, KEY_DOWN), ++ KEY(2, 7, KEY_LEFT), ++ KEY(3, 7, KEY_RIGHT), ++ KEY(2, 6, KEY_HOME), ++ KEY(3, 6, KEY_END), ++ KEY(6, 4, KEY_DELETE), ++ KEY(6, 6, KEY_BACK), ++ KEY(6, 3, KEY_CAPSLOCK), /* KEY_LEFTSHIFT), */ ++ ++ KEY(4, 6, KEY_ENTER), /* scroll push */ ++ KEY(5, 7, KEY_ENTER), /* keypad action */ ++ ++ KEY(0, 4, KEY_EMAIL), ++ KEY(5, 6, KEY_SEND), ++ KEY(4, 0, KEY_CALENDAR), ++ KEY(7, 6, KEY_RECORD), ++ KEY(6, 7, KEY_VOLUMEUP), ++ KEY(7, 7, KEY_VOLUMEDOWN), ++ ++ KEY(0, 6, KEY_F22), /* soft1 */ ++ KEY(1, 6, KEY_F23), /* soft2 */ ++ KEY(0, 3, KEY_AUX), /* contact */ ++}; ++ ++static struct pxa27x_keypad_platform_data zylonite_keypad_info = { ++ .matrix_key_rows = 8, ++ .matrix_key_cols = 8, ++ .matrix_key_map = zylonite_matrix_key_map, ++ .matrix_key_map_size = ARRAY_SIZE(zylonite_matrix_key_map), ++ ++ .enable_rotary0 = 1, ++ .rotary0_up_key = KEY_UP, ++ .rotary0_down_key = KEY_DOWN, ++ ++ .debounce_interval = 30, ++}; ++ ++static void __init zylonite_init_keypad(void) ++{ ++ pxa_set_keypad_info(&zylonite_keypad_info); ++} ++#else ++static inline void zylonite_init_keypad(void) {} ++#endif ++ ++ + static void __init zylonite_init(void) + { + /* board-processor specific initialization */ +@@ -190,6 +257,7 @@ + platform_device_register(&touch_device); + + zylonite_init_lcd(); ++ zylonite_init_keypad(); + } + + MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") +Index: linux-2.6.23-z-input/arch/arm/mach-pxa/devices.h +=================================================================== +--- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/devices.h 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/arch/arm/mach-pxa/devices.h 2008-02-18 01:43:28.000000000 +0100 +@@ -12,3 +12,4 @@ + + extern struct platform_device pxa27x_device_i2c_power; + extern struct platform_device pxa27x_device_ohci; ++extern struct platform_device pxa27x_device_keypad; +Index: linux-2.6.23-z-input/arch/arm/mach-pxa/generic.c +=================================================================== +--- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/generic.c 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/arch/arm/mach-pxa/generic.c 2008-02-18 01:43:28.000000000 +0100 +@@ -450,3 +450,34 @@ + .name = "sa1100-rtc", + .id = -1, + }; ++ ++static struct resource pxa27x_resource_keypad[] = { ++ [0] = { ++ .start = 0x41500000, ++ .end = 0x4150004c, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_KEYPAD, ++ .end = IRQ_KEYPAD, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++struct platform_device pxa27x_device_keypad = { ++ .name = "pxa27x-keypad", ++ .id = -1, ++ .resource = pxa27x_resource_keypad, ++ .num_resources = ARRAY_SIZE(pxa27x_resource_keypad), ++}; ++ ++void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info) ++{ ++ int ret; ++ ++ pxa27x_device_keypad.dev.platform_data = info; ++ ++ ret = platform_device_register(&pxa27x_device_keypad); ++ if (ret) ++ dev_err(&pxa27x_device_keypad.dev, "unable to register device: %d\n", ret); ++} +Index: linux-2.6.23-z-input/arch/arm/mach-pxa/pxa27x.c +=================================================================== +--- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/pxa27x.c 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/arch/arm/mach-pxa/pxa27x.c 2008-02-18 01:43:28.000000000 +0100 +@@ -148,7 +148,7 @@ + + INIT_CKEN("USBCLK", USB, 48000000, 0, &pxa27x_device_ohci.dev), + INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev), +- INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL), ++ INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev), + + /* + INIT_CKEN("PWMCLK", PWM0, 13000000, 0, NULL), +Index: linux-2.6.23-z-input/arch/arm/mach-pxa/pxa3xx.c +=================================================================== +--- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/pxa3xx.c 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/arch/arm/mach-pxa/pxa3xx.c 2008-02-19 01:32:40.000000000 +0100 +@@ -159,6 +159,7 @@ + static struct clk pxa3xx_clks[] = { + INIT_CK("LCDCLK", LCD, &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev), + INIT_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL), ++ INIT_CK("KBDCLK", KEYPAD, &clk_pxa3xx_hsio_ops, &pxa27x_device_keypad.dev), + + INIT_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev), + INIT_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev), +Index: linux-2.6.23-z-input/include/asm-arm/arch-pxa/irqs.h +=================================================================== +--- linux-2.6.23-z-input.orig/include/asm-arm/arch-pxa/irqs.h 2008-02-18 01:43:28.000000000 +0100 ++++ linux-2.6.23-z-input/include/asm-arm/arch-pxa/irqs.h 2008-02-18 01:43:28.000000000 +0100 +@@ -13,7 +13,7 @@ + + #define PXA_IRQ(x) (x) + +-#ifdef CONFIG_PXA27x ++#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) + #define IRQ_SSP3 PXA_IRQ(0) /* SSP3 service request */ + #define IRQ_MSL PXA_IRQ(1) /* MSL Interface interrupt */ + #define IRQ_USBH2 PXA_IRQ(2) /* USB Host interrupt 1 (OHCI) */ +Index: linux-2.6.23-z-input/arch/arm/mach-pxa/pxa300.c +=================================================================== +--- linux-2.6.23-z-input.orig/arch/arm/mach-pxa/pxa300.c 2008-02-19 01:33:58.000000000 +0100 ++++ linux-2.6.23-z-input/arch/arm/mach-pxa/pxa300.c 2008-02-19 01:34:35.000000000 +0100 +@@ -23,8 +23,10 @@ + + MFP_ADDR_X(GPIO0, GPIO2, 0x00b4), + MFP_ADDR_X(GPIO3, GPIO26, 0x027c), +- MFP_ADDR_X(GPIO27, GPIO127, 0x0400), +- MFP_ADDR_X(GPIO0_2, GPIO6_2, 0x02ec), ++ MFP_ADDR_X(GPIO27, GPIO98, 0x0400), ++ MFP_ADDR_X(GPIO99, GPIO127, 0x0600), ++ MFP_ADDR_X(GPIO0_2, GPIO1_2, 0x0674), ++ MFP_ADDR_X(GPIO2_2, GPIO6_2, 0x02dc), + + MFP_ADDR(nBE0, 0x0204), + MFP_ADDR(nBE1, 0x0208), diff --git a/packages/linux/linux-rp-2.6.23/zylonite_mtd-r0.patch b/packages/linux/linux-rp-2.6.23/zylonite_mtd-r0.patch new file mode 100644 index 0000000000..cb5a9c5f72 --- /dev/null +++ b/packages/linux/linux-rp-2.6.23/zylonite_mtd-r0.patch @@ -0,0 +1,4093 @@ +Gross hacks to make the Zylonite boot from flash in VGA. + +Flash driver forward ported to 2.6.14 + +Index: linux-2.6.23/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/mtd/nand/Kconfig 2007-10-09 21:31:38.000000000 +0100 ++++ linux-2.6.23/drivers/mtd/nand/Kconfig 2008-02-13 00:59:45.000000000 +0000 +@@ -223,6 +223,10 @@ + tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)" + depends on ARCH_PXA + ++config MTD_NAND_ZYLONITE ++ tristate "Support for NAND Flash on Zylonite" ++ depends on ARCH_PXA ++ + config MTD_NAND_BASLER_EXCITE + tristate "Support for NAND Flash on Basler eXcite" + depends on BASLER_EXCITE +Index: linux-2.6.23/drivers/mtd/nand/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/mtd/nand/Makefile 2007-10-09 21:31:38.000000000 +0100 ++++ linux-2.6.23/drivers/mtd/nand/Makefile 2008-02-13 00:59:45.000000000 +0000 +@@ -19,6 +19,7 @@ + obj-$(CONFIG_MTD_NAND_H1900) += h1910.o + obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o + obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o ++obj-$(CONFIG_MTD_NAND_ZYLONITE) += mhn_nand.o + obj-$(CONFIG_MTD_NAND_TS7250) += ts7250.o + obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o + obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o +Index: linux-2.6.23/drivers/mtd/nand/mhn_nand.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/mtd/nand/mhn_nand.c 2008-02-13 00:59:45.000000000 +0000 +@@ -0,0 +1,3869 @@ ++/* ++ * drivers/mtd/nand/mhn_nand.c ++ * ++ * Copyright (C) 2005 Intel Coporation (chao.xie@intel.com) ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Overview: ++ * This is a device driver for the NAND flash device on zylonite board ++ * which utilizes the Samsung K9K1216Q0C parts. This is a 64Mibit NAND ++ * flash device. ++ ++ *(C) Copyright 2006 Marvell International Ltd. ++ * All Rights Reserved ++ */ ++ ++#include <linux/slab.h> ++#include <linux/module.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/partitions.h> ++#include <linux/interrupt.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/delay.h> ++#include <linux/dma-mapping.h> ++#include <asm/hardware.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/delay.h> ++#include <asm/dma.h> ++#include <asm/arch/mfp.h> ++//#include <asm/arch/cpu-freq-voltage-mhn.h> ++ ++//#define NDCR 0xf0000000 ++//#define NDCR (*((volatile u32 *)0xf0000000)) ++//#define NDCR __REG_2(0x43100000) /* Data Flash Control register */ ++#define NDCR_SPARE_EN (0x1<<31) ++#define NDCR_ECC_EN (0x1<<30) ++#define NDCR_DMA_EN (0x1<<29) ++#define NDCR_ND_RUN (0x1<<28) ++#define NDCR_DWIDTH_C (0x1<<27) ++#define NDCR_DWIDTH_M (0x1<<26) ++#define NDCR_PAGE_SZ (0x1<<24) ++#define NDCR_NCSX (0x1<<23) ++#define NDCR_ND_MODE (0x3<<21) ++#define NDCR_NAND_MODE 0x0 ++#define NDCR_CLR_PG_CNT (0x1<<20) ++#define NDCR_CLR_ECC ( 0x1<<19) ++#define NDCR_RD_ID_CNT_MASK (0x7<<16) ++#define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK) ++#define NDCR_RA_START (0x1<<15) ++#define NDCR_PG_PER_BLK (0x1<<14) ++#define NDCR_ND_ARB_EN (0x1<<12) ++ ++//#define NDSR (*((volatile u32 *)0xf0000014)) ++//#define NDSR __REG_2(0x43100014) /* Data Controller Status Register */ ++#define NDSR_RDY (0x1<<11) ++#define NDSR_CS0_PAGED (0x1<<10) ++#define NDSR_CS1_PAGED (0x1<<9) ++#define NDSR_CS0_CMDD (0x1<<8) ++#define NDSR_CS1_CMDD (0x1<<7) ++#define NDSR_CS0_BBD (0x1<<6) ++#define NDSR_CS1_BBD (0x1<<5) ++#define NDSR_DBERR (0x1<<4) ++#define NDSR_SBERR (0x1<<3) ++#define NDSR_WRDREQ (0x1<<2) ++#define NDSR_RDDREQ (0x1<<1) ++#define NDSR_WRCMDREQ (0x1) ++ ++#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ ++//#define NDCB0 __REG_2(0x43100048) /* Data Controller Command Buffer0 */ ++//#define NDCB1 __REG_2(0x4310004C) /* Data Controller Command Buffer1 */ ++//#define NDCB2 __REG_2(0x43100050) /* Data Controller Command Buffer2 */ ++#define NDCB0_AUTO_RS (0x1<<25) ++#define NDCB0_CSEL (0x1<<24) ++#define NDCB0_CMD_TYPE_MASK (0x7<<21) ++#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK) ++#define NDCB0_NC (0x1<<20) ++#define NDCB0_DBC (0x1<<19) ++#define NDCB0_ADDR_CYC_MASK (0x7<<16) ++#define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK) ++#define NDCB0_CMD2_MASK (0xff<<8) ++#define NDCB0_CMD1_MASK (0xff) ++#define NDCB0_ADDR_CYC_SHIFT (16) ++#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ ++#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ ++#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ ++#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ ++#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ ++#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ ++#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ ++#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ ++#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ ++#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ ++#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ ++#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ ++#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ ++#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ ++#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ ++#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ ++#define DCMD(x) __REG2(0x4000020c, (x) << 4) ++#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ ++#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ ++#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ ++#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ ++#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ ++#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ ++#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ ++#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ ++#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ ++#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ ++#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ ++#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ ++#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ ++#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ ++#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) ++#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) ++#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) ++#define DRCMR(n) __REG2(0x40000100, (n)<<2) ++#define DRCMR97 __REG(0x40001184) /* Request to Channel Map Register for NAND interface data transmit & receive Request */ ++#define DRCMR98 __REG(0x40001188) /* Reserved */ ++#define DRCMR99 __REG(0x4000118C) /* Request to Channel Map Register for NAND interface command transmit Request */ ++#define DRCMRRXSADR DRCMR2 ++#define DRCMRTXSADR DRCMR3 ++#define DRCMRRXBTRBR DRCMR4 ++#define DRCMRTXBTTHR DRCMR5 ++#define DRCMRRXFFRBR DRCMR6 ++#define DRCMRTXFFTHR DRCMR7 ++#define DRCMRRXMCDR DRCMR8 ++#define DRCMRRXMODR DRCMR9 ++#define DRCMRTXMODR DRCMR10 ++#define DRCMRRXPCDR DRCMR11 ++#define DRCMRTXPCDR DRCMR12 ++#define DRCMRRXSSDR DRCMR13 ++#define DRCMRTXSSDR DRCMR14 ++#define DRCMRRXICDR DRCMR17 ++#define DRCMRTXICDR DRCMR18 ++#define DRCMRRXSTRBR DRCMR19 ++#define DRCMRTXSTTHR DRCMR20 ++#define DRCMRRXMMC DRCMR21 ++#define DRCMRTXMMC DRCMR22 ++#define DRCMRRXMMC2 DRCMR93 ++#define DRCMRTXMMC2 DRCMR94 ++#define DRCMRRXMMC3 DRCMR100 ++#define DRCMRTXMMC3 DRCMR101 ++#define DRCMRUDC(x) DRCMR((x) + 24) ++#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ ++#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */ ++#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ ++#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ ++#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ ++#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ ++#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ ++#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ ++#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ ++#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ ++#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ ++#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ ++#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ ++#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ ++#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ ++#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ ++#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ ++#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ ++#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */ ++#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */ ++#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */ ++#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */ ++#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */ ++#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */ ++#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */ ++#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */ ++#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */ ++#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */ ++#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */ ++#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */ ++#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */ ++#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */ ++#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */ ++#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */ ++#define DCSR(x) __REG2(0x40000000, (x) << 2) ++#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ ++#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ ++#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ ++#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ ++#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ ++#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ ++#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ ++#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ ++#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ ++#define DCSR_EORINTR (1 << 9) /* The end of Receive */ ++#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ ++#define DCSR_RASINTR (1 << 4) /* Request After Channel Stopped */ ++#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ ++#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ ++#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ ++#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ ++#define DDADR(x) __REG2(0x40000200, (x) << 4) ++//#define __REG_2(x) (*((volatile u32 *)io_p2v_2(x))) ++#define IRQ_NAND PXA_IRQ(45) ++#define CKEN_NAND 4 ///< NAND Flash Controller Clock Enable ++ ++/* #define CONFIG_MTD_NAND_MONAHANS_DEBUG */ ++#ifdef CONFIG_MTD_NAND_MONAHANS_DEBUG ++#define D1(x) do { \ ++ printk(KERN_DEBUG "%s: ", __FUNCTION__); \ ++ x; \ ++ }while(0) ++ ++#define DPRINTK(fmt,args...) printk(KERN_DEBUG fmt, ##args ) ++#define PRINT_BUF(buf, num) print_buf(buf, num) ++#else ++#define D1(x) ++#define DPRINTK(fmt,args...) ++#define PRINT_BUF(buf, num) ++#endif ++ ++/* DFC timing 0 register */ ++#define DFC_TIMING_tRP 0 ++#define DFC_TIMING_tRH 3 ++#define DFC_TIMING_tWP 8 ++#define DFC_TIMING_tWH 11 ++#define DFC_TIMING_tCS 16 ++#define DFC_TIMING_tCH 19 ++ ++/* DFC timing 1 register */ ++#define DFC_TIMING_tAR 0 ++#define DFC_TIMING_tWHR 4 ++#define DFC_TIMING_tR 16 ++ ++/* max value for each timing setting in DFC */ ++#define DFC_TIMING_MAX_tCH 7 ++#define DFC_TIMING_MAX_tCS 7 ++#define DFC_TIMING_MAX_tWH 7 ++#define DFC_TIMING_MAX_tWP 7 ++#define DFC_TIMING_MAX_tRH 7 ++#define DFC_TIMING_MAX_tRP 7 ++#define DFC_TIMING_MAX_tR 65535 ++#define DFC_TIMING_MAX_tWHR 15 ++#define DFC_TIMING_MAX_tAR 15 ++ ++/* ++ * The Data Flash Controller Flash timing structure ++ * For NAND flash used on Zylonite board(Samsung K9K1216Q0C), ++ * user should use value at end of each row of following member ++ * bracketed. ++ */ ++struct dfc_flash_timing { ++ uint32_t tCH; /* Enable signal hold time */ ++ uint32_t tCS; /* Enable signal setup time */ ++ uint32_t tWH; /* ND_nWE high duration */ ++ uint32_t tWP; /* ND_nWE pulse time */ ++ uint32_t tRH; /* ND_nRE high duration */ ++ uint32_t tRP; /* ND_nRE pulse width */ ++ uint32_t tR; /* ND_nWE high to ND_nRE low for read */ ++ uint32_t tWHR;/* ND_nWE high to ND_nRE low delay for status read */ ++ uint32_t tAR; /* ND_ALE low to ND_nRE low delay */ ++}; ++ ++/* DFC command type */ ++enum { ++ DFC_CMD_READ = 0x00000000, ++ DFC_CMD_PROGRAM = 0x00200000, ++ DFC_CMD_ERASE = 0x00400000, ++ DFC_CMD_READ_ID = 0x00600000, ++ DFC_CMD_STATUS_READ = 0x00800000, ++ DFC_CMD_RESET = 0x00a00000 ++}; ++ ++/* ++ * The Data Flash Controller Flash specification structure ++ * For NAND flash used on Zylonite board(Samsung K9K1216Q0C), ++ * user should use value at end of each row of following member ++ * bracketed. ++ */ ++struct dfc_flash_info { ++ struct dfc_flash_timing timing; /* NAND Flash timing */ ++ ++ int enable_arbiter;/* Data flash bus arbiter enable (ND_ARB_EN) */ ++ uint32_t page_per_block;/* Pages per block (PG_PER_BLK) */ ++ uint32_t row_addr_start;/* Row address start position (RA_START) */ ++ uint32_t read_id_bytes; /* returned ID bytes(RD_ID_CNT) */ ++ uint32_t dfc_mode; /* NAND, CARBONDALE, PIXLEY... (ND_MODE) */ ++ uint32_t ncsx; /* Chip select don't care bit (NCSX) */ ++ uint32_t page_size; /* Page size in bytes (PAGE_SZ) */ ++ uint32_t oob_size; /* OOB size */ ++ uint32_t flash_width; /* Width of Flash memory (DWIDTH_M) */ ++ uint32_t dfc_width; /* Width of flash controller(DWIDTH_C) */ ++ uint32_t num_blocks; /* Number of physical blocks in Flash */ ++ uint32_t chip_id; ++ ++ /* command codes */ ++ uint32_t read1; /* Read */ ++ uint32_t read2; /* unused, DFC don't support yet */ ++ uint32_t program; /* two cycle command */ ++ uint32_t read_status; ++ uint32_t read_id; ++ uint32_t erase; /* two cycle command */ ++ uint32_t reset; ++ uint32_t lock; /* lock whole flash */ ++ uint32_t unlock; /* two cycle command, supporting partial unlock */ ++ uint32_t lock_status; /* read block lock status */ ++ ++ /* addr2ndcb1 - encode address cycles into register NDCB1 */ ++ /* ndbbr2addr - convert register NDBBR to bad block address */ ++ int (*addr2ndcb1)(uint16_t cmd, uint32_t addr, uint32_t *p); ++ int (*ndbbr2addr)(uint16_t cmd, uint32_t ndbbr,uint32_t *p); ++}; ++ ++enum { ++ DFC_FLASH_NULL = 0 , ++ DFC_FLASH_Samsung_512Mb_X_16 = 1, ++ DFC_FLASH_Micron_1Gb_X_8 = 2, ++ DFC_FLASH_Micron_1Gb_X_16 = 3, ++ DFC_FLASH_STM_1Gb_X_16 = 4, ++ DFC_FLASH_STM_2Gb_X_16 = 5, ++ DFC_FLASH_END, ++}; ++ ++static int dfc_get_flash_info(int type, struct dfc_flash_info **flash_info); ++ ++#define DFC_NDCR 0 ++#define DFC_NDTR0CS0 1 ++#define DFC_NDTR1CS0 3 ++#define DFC_NDSR 5 ++#define DFC_NDPCR 6 ++#define DFC_NDBDR0 7 ++#define DFC_NDBDR1 8 ++#define DFC_NDDB 16 ++#define DFC_NDCB0 18 ++#define DFC_NDCB1 19 ++#define DFC_NDCB2 20 ++ ++/* The Data Flash Controller Mode structure */ ++struct dfc_mode { ++ int enable_dma; /* DMA, or nonDMA mode */ ++ int enable_ecc; /* ECC on/off */ ++ int enable_spare; /* Spare enable */ ++ int chip_select; /* CS0 or CS1 */ ++}; ++ ++/* The Data Flash Controller Context structure */ ++struct dfc_context { ++ unsigned char __iomem *membase; /* DFC register base */ ++ struct dfc_mode *dfc_mode; /* DFC mode */ ++ int data_dma_ch; /* Data DMA channel number */ ++ int cmd_dma_ch; /* CMD DMA channel number */ ++ struct dfc_flash_info *flash_info; /* Flash Spec */ ++ struct mtd_info *mtd; ++}; ++ ++#define NDCB0_DMA_ADDR 0x43100048 ++#define NDDB_DMA_ADDR 0x43100040 ++ ++#define NDSR_MASK 0xFFF ++ ++/* The following data is a rough evaluation */ ++ ++/* microsecond, for readID/readStatus/reset */ ++#define NAND_OTHER_TIMEOUT 10 ++/* microsecond, for readID/readStatus/reset */ ++#define NAND_CMD_TIMEOUT 10 ++ ++#define BBT_BLOCK_BAD 0x03 ++#define BBT_BLOCK_GOOD 0x00 ++#define BBT_BLOCK_REV1 0x01 ++#define BBT_BLOCK_REV2 0x02 ++ ++#define BUFLEN (2048 + 64) ++ ++/* ++ * DFC data size enumeration transfered from/to controller, ++ * including padding (zero)to be a multiple of 32. ++ */ ++enum { ++ DFC_DATA_SIZE_STATUS = 8, /* ReadStatus/ReadBlockLockStatus */ ++ DFC_DATA_SIZE_ID = 7, /* ReadID */ ++ ++ DFC_DATA_SIZE_32 = 32, ++ DFC_DATA_SIZE_512 = 512, /* R/W disabling spare area */ ++ DFC_DATA_SIZE_520 = 520, /* Spare=1, ECC=1 */ ++ DFC_DATA_SIZE_528 = 528, /* Spare=1, ECC=0 */ ++ DFC_DATA_SIZE_544 = 544, /* R/W enabling spare area.(DMA mode)*/ ++ ++ DFC_DATA_SIZE_64 = 64, ++ DFC_DATA_SIZE_2048 = 2048, /* R/W disabling spare area */ ++ DFC_DATA_SIZE_2088 = 2088, /* R/W enabling spare area with ecc */ ++ DFC_DATA_SIZE_2112 = 2112, /* R/W enabling spare area without ecc*/ ++ DFC_DATA_SIZE_2096 = 2096, /* R/W enabling spare area */ ++ DFC_DATA_SIZE_UNUSED = 0xFFFF ++}; ++ ++/* DFC padding size enumeration transfered from/to controller */ ++enum { ++ /* ++ * ReadStatus/ReadBlockLockStatus/ReadID/ ++ * Read/Program disabling spare area(Both 512 and 2048) ++ * Read/Program enabling spare area, disabling ECC ++ */ ++ DFC_PADDING_SIZE_0 = 0, ++ ++ /* Read/program with SPARE_EN=1, ECC_EN=0, pgSize=512 */ ++ DFC_PADDING_SIZE_16 = 16, ++ /* for read/program with SPARE_EN=1, ECC_EN=1, pgSize=512 and 2048 */ ++ DFC_PADDING_SIZE_24 = 24, ++ DFC_PADDING_SIZE_UNUSED = 0xFFFF ++}; ++ ++static unsigned int flash_config = DFC_FLASH_NULL; ++ ++void dfc_set_timing(struct dfc_context *context, struct dfc_flash_timing *t); ++void dfc_set_dma(struct dfc_context *context); ++void dfc_set_ecc(struct dfc_context *context); ++void dfc_set_spare(struct dfc_context *context); ++ ++int dfc_get_pattern(struct dfc_context *context, uint16_t cmd, ++ int *data_size, int *padding); ++ ++static int dfc_wait_event(struct dfc_context *context, uint32_t event, ++ uint32_t *event_out, uint32_t timeout, int enable_int); ++ ++int dfc_send_cmd(struct dfc_context *context, uint16_t cmd, ++ uint32_t addr, int num_pages); ++ ++void dfc_stop(struct dfc_context *context); ++void dfc_read_fifo_partial(struct dfc_context *context, uint8_t *buffer, ++ int nbytes, int data_size); ++void dfc_write_fifo_partial(struct dfc_context *context, uint8_t *buffer, ++ int nbytes, int data_size); ++ ++void dfc_read_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes); ++void dfc_write_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes); ++ ++void dfc_read_badblock_addr(struct dfc_context *context, uint32_t *bbaddr); ++ ++void dfc_clear_int(struct dfc_context *context, uint32_t int_mask); ++void dfc_enable_int(struct dfc_context *context, uint32_t int_mask); ++void dfc_disable_int(struct dfc_context *context, uint32_t int_mask); ++ ++/* high level primitives */ ++int dfc_init(struct dfc_context *context, int type); ++int dfc_init_no_gpio(struct dfc_context *context, int type); ++ ++int dfc_reset_flash(struct dfc_context *context); ++ ++int dfc_setup_cmd_dma(struct dfc_context *context, ++ uint16_t cmd, uint32_t addr, int num_pages, ++ uint32_t *buf, uint32_t buf_phys, ++ uint32_t next_desc_phys, uint32_t dma_int_en, ++ struct pxa_dma_desc *dma_desc); ++ ++int dfc_setup_data_dma(struct dfc_context *context, ++ uint16_t cmd, uint32_t buf_phys, ++ uint32_t next_desc_phys, uint32_t dma_int_en, ++ struct pxa_dma_desc *dma_desc); ++ ++void dfc_start_cmd_dma(struct dfc_context *context, ++ struct pxa_dma_desc *dma_desc); ++void dfc_start_data_dma(struct dfc_context *context, ++ struct pxa_dma_desc *dma_desc); ++static int monahans_df_dev_ready(struct mtd_info *mtd); ++ ++#ifdef CONFIG_DVFM ++static int mhn_nand_dvfm_notifier(unsigned cmd, void *client_data, void *info); ++static struct mhn_fv_notifier dvfm_notifier = { ++ .name = "monahans-nand-flash", ++ .priority = 0, ++ .notifier_call = mhn_nand_dvfm_notifier, ++}; ++#endif ++ ++static unsigned short search_rel_block(int block, struct mtd_info *mtd); ++ ++/***************************************************************************** ++ * The DFC registers read/write routines ++ *****************************************************************************/ ++static inline void dfc_write(struct dfc_context *context, int offset, ++ unsigned long value) ++{ ++ offset <<= 2; ++ writel(value, context->membase + offset); ++} ++ ++static inline unsigned int dfc_read(struct dfc_context *context, int offset) ++{ ++ offset <<= 2; ++ return __raw_readl(context->membase + offset); ++} ++ ++/**************************************************************************** ++ * Flash Information ++ ***************************************************************************/ ++ ++static int Samsung512MbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p); ++static int Samsung512MbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p); ++ ++static struct dfc_flash_info samsung512MbX16 = ++{ ++ .timing = { ++ .tCH = 10, /* tCH, Enable signal hold time */ ++ .tCS = 0, /* tCS, Enable signal setup time */ ++ .tWH = 20, /* tWH, ND_nWE high duration */ ++ .tWP = 40, /* tWP, ND_nWE pulse time */ ++ .tRH = 30, /* tRH, ND_nRE high duration */ ++ .tRP = 40, /* tRP, ND_nRE pulse width */ ++ /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */ ++ .tR = 11123, ++ /* tWHR, ND_nWE high to ND_nRE low delay for status read */ ++ .tWHR = 110, ++ .tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */ ++ }, ++ .enable_arbiter = 1, /* Data flash bus arbiter enable */ ++ .page_per_block = 32, /* Pages per block */ ++ .row_addr_start = 0, /* Second cycle start, Row address start position */ ++ .read_id_bytes = 2, /* 2 bytes, returned ID bytes */ ++ .dfc_mode = 0, /* NAND mode */ ++ .ncsx = 0, ++ .page_size = 512, /* Page size in bytes */ ++ .oob_size = 16, /* OOB size in bytes */ ++ .flash_width = 16, /* Width of Flash memory */ ++ .dfc_width = 16, /* Width of flash controller */ ++ .num_blocks = 4096, /* Number of physical blocks in Flash */ ++ .chip_id = 0x46ec, ++ ++ /* command codes */ ++ .read1 = 0x0000, /* Read */ ++ .read2 = 0x0050, /* Read1 unused, current DFC don't support */ ++ .program = 0x1080, /* Write, two cycle command */ ++ .read_status = 0x0070, /* Read status */ ++ .read_id = 0x0090, /* Read ID */ ++ .erase = 0xD060, /* Erase, two cycle command */ ++ .reset = 0x00FF, /* Reset */ ++ .lock = 0x002A, /* Lock whole flash */ ++ .unlock = 0x2423, /* Unlock, two cycle command, supporting partial unlock */ ++ .lock_status = 0x007A, /* Read block lock status */ ++ .addr2ndcb1 = Samsung512MbX16Addr2NDCB1, ++ .ndbbr2addr = Samsung512MbX16NDBBR2Addr, ++}; ++ ++static int Samsung512MbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p) ++{ ++ uint32_t ndcb1 = 0; ++ ++ if (addr >= 0x4000000) return -EINVAL; ++ ++ if (cmd == samsung512MbX16.read1 || cmd == samsung512MbX16.program) { ++ ndcb1 = (addr & 0xFF) | ((addr >> 1) & 0x01FFFF00); ++ } else if (cmd == samsung512MbX16.erase) { ++ ndcb1 = ((addr >> 9) & 0x00FFFFFF); ++ } ++ ++ *p = ndcb1; ++ return 0; ++ ++} ++ ++static int Samsung512MbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p) ++{ ++ *p = ndbbr << 9; ++ return 0; ++} ++ ++static int Micron1GbX8Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p); ++static int Micron1GbX8NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p); ++ ++static struct dfc_flash_info micron1GbX8 = ++{ ++ .timing = { ++ .tCH = 10, /* tCH, Enable signal hold time */ ++ .tCS = 25, /* tCS, Enable signal setup time */ ++ .tWH = 15, /* tWH, ND_nWE high duration */ ++ .tWP = 25, /* tWP, ND_nWE pulse time */ ++ .tRH = 15, /* tRH, ND_nRE high duration */ ++ .tRP = 25, /* tRP, ND_nRE pulse width */ ++ /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */ ++ .tR = 25000, ++ /* tWHR, ND_nWE high to ND_nRE low delay for status read */ ++ .tWHR = 60, ++ .tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */ ++ }, ++ .enable_arbiter = 1, /* Data flash bus arbiter enable */ ++ .page_per_block = 64, /* Pages per block */ ++ .row_addr_start = 1, /* Second cycle start, Row address start position */ ++ .read_id_bytes = 4, /* Returned ID bytes */ ++ .dfc_mode = 0, /* NAND mode */ ++ .ncsx = 0, ++ .page_size = 2048, /* Page size in bytes */ ++ .oob_size = 64, /* OOB size in bytes */ ++ .flash_width = 8, /* Width of Flash memory */ ++ .dfc_width = 8, /* Width of flash controller */ ++ .num_blocks = 1024, /* Number of physical blocks in Flash */ ++ .chip_id = 0xa12c, ++ /* command codes */ ++ .read1 = 0x3000, /* Read */ ++ .read2 = 0x0050, /* Read1 unused, current DFC don't support */ ++ .program = 0x1080, /* Write, two cycle command */ ++ .read_status = 0x0070, /* Read status */ ++ .read_id = 0x0090, /* Read ID */ ++ .erase = 0xD060, /* Erase, two cycle command */ ++ .reset = 0x00FF, /* Reset */ ++ .lock = 0x002A, /* Lock whole flash */ ++ .unlock = 0x2423, /* Unlock, two cycle command, supporting partial unlock */ ++ .lock_status = 0x007A, /* Read block lock status */ ++ .addr2ndcb1 = Micron1GbX8Addr2NDCB1, ++ .ndbbr2addr = Micron1GbX8NDBBR2Addr, ++}; ++ ++static int Micron1GbX8Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p) ++{ ++ uint32_t ndcb1 = 0; ++ uint32_t page; ++ ++ if (addr >= 0x8000000) ++ return -EINVAL; ++ page = addr / micron1GbX8.page_size; ++ addr = (page / micron1GbX8.page_per_block) << 18 | ++ (page % micron1GbX8.page_per_block) << 12; ++ ++ if (cmd == micron1GbX8.read1 || cmd == micron1GbX8.program) { ++ ndcb1 = (addr & 0xFFF) | ((addr << 4) & 0xFFFF0000); ++ } ++ else if (cmd == micron1GbX8.erase) { ++ ndcb1 = ((addr >> 18) << 6) & 0xFFFF; ++ } ++ ++ *p = ndcb1; ++ return 0; ++} ++ ++static int Micron1GbX8NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p) ++{ ++ if (cmd == micron1GbX8.read1 || cmd == micron1GbX8.program) { ++ *p = ((ndbbr & 0xF) << 8) | ((ndbbr >> 8) << 16); ++ } ++ else if (cmd == micron1GbX8.erase) { ++ *p = (ndbbr >> 6) << 18; ++ } ++ ++ ++ return 0; ++} ++ ++ ++static int Micron1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p); ++static int Micron1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p); ++ ++static struct dfc_flash_info micron1GbX16 = ++{ ++ .timing = { ++ .tCH = 10, /* tCH, Enable signal hold time */ ++ .tCS = 25, /* tCS, Enable signal setup time */ ++ .tWH = 15, /* tWH, ND_nWE high duration */ ++ .tWP = 25, /* tWP, ND_nWE pulse time */ ++ .tRH = 15, /* tRH, ND_nRE high duration */ ++ .tRP = 25, /* tRP, ND_nRE pulse width */ ++ /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */ ++ .tR = 25000, ++ /* tWHR, ND_nWE high to ND_nRE low delay for status read */ ++ .tWHR = 60, ++ .tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */ ++ }, ++ .enable_arbiter = 1, /* Data flash bus arbiter enable */ ++ .page_per_block = 64, /* Pages per block */ ++ .row_addr_start = 1, /* Second cycle start, Row address start position */ ++ .read_id_bytes = 4, /* Returned ID bytes */ ++ .dfc_mode = 0, /* NAND mode */ ++ .ncsx = 0, ++ .page_size = 2048, /* Page size in bytes */ ++ .oob_size = 64, /* OOB size in bytes */ ++ .flash_width = 16, /* Width of Flash memory */ ++ .dfc_width = 16, /* Width of flash controller */ ++ .num_blocks = 1024, /* Number of physical blocks in Flash */ ++ .chip_id = 0xb12c, ++ ++ /* command codes */ ++ .read1 = 0x3000, /* Read */ ++ .read2 = 0x0050, /* Read1 unused, current DFC don't support */ ++ .program = 0x1080, /* Write, two cycle command */ ++ .read_status = 0x0070, /* Read status */ ++ .read_id = 0x0090, /* Read ID */ ++ .erase = 0xD060, /* Erase, two cycle command */ ++ .reset = 0x00FF, /* Reset */ ++ .lock = 0x002A, /* Lock whole flash */ ++ .unlock = 0x2423, /* Unlock, two cycle command, supporting partial unlock */ ++ .lock_status = 0x007A, /* Read block lock status */ ++ .addr2ndcb1 = Micron1GbX16Addr2NDCB1, ++ .ndbbr2addr = Micron1GbX16NDBBR2Addr, ++}; ++ ++static int Micron1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p) ++{ ++ uint32_t ndcb1 = 0; ++ uint32_t page; ++ ++ if (addr >= 0x8000000) ++ return -EINVAL; ++ page = addr / micron1GbX16.page_size; ++ addr = (page / micron1GbX16.page_per_block) << 17 | ++ (page % micron1GbX16.page_per_block) << 11; ++ ++ if (cmd == micron1GbX16.read1 || cmd == micron1GbX16.program) { ++ ndcb1 = (addr & 0x7FF) | ((addr << 5) & 0xFFFF0000); ++ } ++ else if (cmd == micron1GbX16.erase) { ++ ndcb1 = ((addr >> 17) << 6) & 0xFFFF; ++ } ++ *p = ndcb1; ++ return 0; ++} ++ ++static int Micron1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p) ++{ ++ if (cmd == micron1GbX16.read1 || cmd == micron1GbX16.program) { ++ *p = ((ndbbr & 0x7) << 8) | ((ndbbr >> 8) << 16); ++ } ++ else if (cmd == micron1GbX16.erase) { ++ *p = (ndbbr >> 6) << 17; ++ } ++ ++ return 0; ++} ++ ++static int STM1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p); ++static int STM1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p); ++ ++static struct dfc_flash_info stm1GbX16 = ++{ ++ .timing = { ++ .tCH = 10, /* tCH, Enable signal hold time */ ++ .tCS = 10, /* tCS, Enable signal setup time */ ++ .tWH = 20, /* tWH, ND_nWE high duration */ ++ .tWP = 25, /* tWP, ND_nWE pulse time */ ++ .tRH = 20, /* tRH, ND_nRE high duration */ ++ .tRP = 25, /* tRP, ND_nRE pulse width */ ++ /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */ ++ .tR = 25000, ++ /* tWHR, ND_nWE high to ND_nRE low delay for status read */ ++ .tWHR = 60, ++ .tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */ ++ }, ++ .enable_arbiter = 1, /* Data flash bus arbiter enable */ ++ .page_per_block = 64, /* Pages per block */ ++ .row_addr_start = 1, /* Second cycle start, Row address start position */ ++ .read_id_bytes = 4, /* Returned ID bytes */ ++ .dfc_mode = 0, /* NAND mode */ ++ .ncsx = 0, ++ .page_size = 2048, /* Page size in bytes */ ++ .oob_size = 64, /* OOB size in bytes */ ++ .flash_width = 16, /* Width of Flash memory */ ++ .dfc_width = 16, /* Width of flash controller */ ++ .num_blocks = 1024, /* Number of physical blocks in Flash */ ++ .chip_id = 0xb120, ++ ++ /* command codes */ ++ .read1 = 0x3000, /* Read */ ++ .read2 = 0x0050, /* Read1 unused, current DFC don't support */ ++ .program = 0x1080, /* Write, two cycle command */ ++ .read_status = 0x0070, /* Read status */ ++ .read_id = 0x0090, /* Read ID */ ++ .erase = 0xD060, /* Erase, two cycle command */ ++ .reset = 0x00FF, /* Reset */ ++ .lock = 0x002A, /* Lock whole flash */ ++ .unlock = 0x2423, /* Unlock, two cycle command, supporting partial unlock */ ++ .lock_status = 0x007A, /* Read block lock status */ ++ .addr2ndcb1 = STM1GbX16Addr2NDCB1, ++ .ndbbr2addr = STM1GbX16NDBBR2Addr, ++}; ++ ++static int STM1GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p) ++{ ++ uint32_t ndcb1 = 0; ++ uint32_t page; ++ ++ if (addr >= 0x8000000) ++ return -EINVAL; ++ page = addr / stm1GbX16.page_size; ++ addr = (page / stm1GbX16.page_per_block) << 17 | ++ (page % stm1GbX16.page_per_block) << 11; ++ ++ if (cmd == stm1GbX16.read1 || cmd == stm1GbX16.program) { ++ ndcb1 = (addr & 0x7FF) | ((addr << 5) & 0xFFFF0000); ++ } ++ else if (cmd == stm1GbX16.erase) { ++ ndcb1 = ((addr >> 17) << 6) & 0xFFFF; ++ } ++ *p = ndcb1; ++ return 0; ++} ++ ++static int STM1GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p) ++{ ++ if (cmd == stm1GbX16.read1 || cmd == stm1GbX16.program) { ++ *p = ((ndbbr & 0x7) << 8) | ((ndbbr >> 8) << 16); ++ } ++ else if (cmd == stm1GbX16.erase) { ++ *p = (ndbbr >> 6) << 17; ++ } ++ ++ return 0; ++} ++ ++static int STM2GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p); ++static int STM2GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p); ++ ++static struct dfc_flash_info stm2GbX16 = ++{ ++ .timing = { ++ .tCH = 10, /* tCH, Enable signal hold time */ ++ .tCS = 10, /* tCS, Enable signal setup time */ ++ .tWH = 20, /* tWH, ND_nWE high duration */ ++ .tWP = 25, /* tWP, ND_nWE pulse time */ ++ .tRH = 20, /* tRH, ND_nRE high duration */ ++ .tRP = 25, /* tRP, ND_nRE pulse width */ ++ /* tR = tR+tRR+tWB+1, ND_nWE high to ND_nRE low for read */ ++ .tR = 25000, ++ /* tWHR, ND_nWE high to ND_nRE low delay for status read */ ++ .tWHR = 60, ++ .tAR = 10, /* tAR, ND_ALE low to ND_nRE low delay */ ++ }, ++ .enable_arbiter = 1, /* Data flash bus arbiter enable */ ++ .page_per_block = 64, /* Pages per block */ ++ .row_addr_start = 1, /* Second cycle start, Row address start position */ ++ .read_id_bytes = 4, /* Returned ID bytes */ ++ .dfc_mode = 0, /* NAND mode */ ++ .ncsx = 0, ++ .page_size = 2048, /* Page size in bytes */ ++ .oob_size = 64, /* OOB size in bytes */ ++ .flash_width = 16, /* Width of Flash memory */ ++ .dfc_width = 16, /* Width of flash controller */ ++ .num_blocks = 2048, /* Number of physical blocks in Flash */ ++ .chip_id = 0xca20, ++ ++ /* command codes */ ++ .read1 = 0x3000, /* Read */ ++ .read2 = 0x0050, /* Read1 unused, current DFC don't support */ ++ .program = 0x1080, /* Write, two cycle command */ ++ .read_status = 0x0070, /* Read status */ ++ .read_id = 0x0090, /* Read ID */ ++ .erase = 0xD060, /* Erase, two cycle command */ ++ .reset = 0x00FF, /* Reset */ ++ .lock = 0x002A, /* Lock whole flash */ ++ .unlock = 0x2423, /* Unlock, two cycle command, supporting partial unlock */ ++ .lock_status = 0x007A, /* Read block lock status */ ++ .addr2ndcb1 = STM2GbX16Addr2NDCB1, ++ .ndbbr2addr = STM2GbX16NDBBR2Addr, ++}; ++ ++static int STM2GbX16Addr2NDCB1(uint16_t cmd, uint32_t addr, uint32_t *p) ++{ ++ uint32_t ndcb1 = 0; ++ uint32_t page; ++ ++ if (addr >= 0x8000000) ++ return -EINVAL; ++ page = addr / stm2GbX16.page_size; ++ addr = (page / stm2GbX16.page_per_block) << 17 | ++ (page % stm2GbX16.page_per_block) << 11; ++ ++ if (cmd == stm2GbX16.read1 || cmd == stm2GbX16.program) { ++ ndcb1 = (addr & 0x7FF) | ((addr << 5) & 0xFFFF0000); ++ } ++ else if (cmd == stm2GbX16.erase) { ++ ndcb1 = ((addr >> 17) << 6) & 0xFFFF; ++ } ++ *p = ndcb1; ++ return 0; ++} ++ ++static int STM2GbX16NDBBR2Addr(uint16_t cmd, uint32_t ndbbr, uint32_t *p) ++{ ++ if (cmd == stm2GbX16.read1 || cmd == stm2GbX16.program) { ++ *p = ((ndbbr & 0x7) << 8) | ((ndbbr >> 8) << 16); ++ } ++ else if (cmd == stm2GbX16.erase) { ++ *p = (ndbbr >> 6) << 17; ++ } ++ ++ return 0; ++} ++ ++static struct { ++ int type; ++ struct dfc_flash_info *flash_info; ++} type_info[] = { ++ { DFC_FLASH_Samsung_512Mb_X_16, &samsung512MbX16}, ++ { DFC_FLASH_Micron_1Gb_X_8, µn1GbX8}, ++ { DFC_FLASH_Micron_1Gb_X_16, µn1GbX16}, ++ { DFC_FLASH_STM_1Gb_X_16, &stm1GbX16}, ++ { DFC_FLASH_STM_2Gb_X_16, &stm2GbX16}, ++ { DFC_FLASH_NULL, NULL}, ++}; ++ ++int dfc_get_flash_info(int type, struct dfc_flash_info **flash_info) ++{ ++ uint32_t i = 0; ++ ++ while(type_info[i].type != DFC_FLASH_NULL) { ++ if (type_info[i].type == type) { ++ *flash_info = type_info[i].flash_info; ++ return 0; ++ } ++ i++; ++ } ++ *flash_info = NULL; ++ return -EINVAL; ++} ++ ++/****************************************************************************** ++ dfc_set_timing ++ ++ Description: ++ This function sets flash timing property in DFC timing register ++ according to input timing value embodied in context structure. ++ It is called once during the hardware initialization. ++ Input Parameters: ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++//#if defined(CONFIG_CPU_MONAHANS_L) || defined(CONFIG_CPU_MONAHANS_LV) ++#define DFC_CLOCK 208 ++//#else ++//#define DFC_CLOCK 104 ++//#endif ++#define CLOCK_NS DFC_CLOCK/1000 ++ ++void dfc_set_timing(struct dfc_context *context, struct dfc_flash_timing *t) ++{ ++ struct dfc_flash_timing timing = *t; ++ ++ uint32_t r0 = 0; ++ uint32_t r1 = 0; ++ ++ /* ++ * num of clock cycles = time (ns) / one clock sycle (ns) + 1 ++ * - integer division will truncate the result, so add a 1 in all cases ++ * - subtract the extra 1 cycle added to all register timing values ++ */ ++ timing.tCH = min(((int) (timing.tCH * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tCH); ++ timing.tCS = min(((int) (timing.tCS * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tCS); ++ timing.tWH = min(((int) (timing.tWH * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tWH); ++ timing.tWP = min(((int) (timing.tWP * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tWP); ++ timing.tRH = min(((int) (timing.tRH * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tRH); ++ timing.tRP = min(((int) (timing.tRP * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tRP); ++ ++ r0 = (timing.tCH << DFC_TIMING_tCH) | ++ (timing.tCS << DFC_TIMING_tCS) | ++ (timing.tWH << DFC_TIMING_tWH) | ++ (timing.tWP << DFC_TIMING_tWP) | ++ (timing.tRH << DFC_TIMING_tRH) | ++ (timing.tRP << DFC_TIMING_tRP); ++ ++ dfc_write(context, DFC_NDTR0CS0, r0); ++ ++ timing.tR = min(((int) (timing.tR * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tR); ++ timing.tWHR = min(((int) (timing.tWHR * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tWHR); ++ timing.tAR = min(((int) (timing.tAR * CLOCK_NS) + 1), ++ DFC_TIMING_MAX_tAR); ++ ++ r1 = (timing.tR << DFC_TIMING_tR) | ++ (timing.tWHR << DFC_TIMING_tWHR) | ++ (timing.tAR << DFC_TIMING_tAR); ++ ++ dfc_write(context, DFC_NDTR1CS0, r1); ++ return; ++} ++ ++/****************************************************************************** ++ dfc_set_dma ++ ++ Description: ++ Enables or Disables DMA in line with setting in DFC mode of context ++ structure. DMA mode of DFC. Performs a read-modify-write operation that ++ only changes the driven DMA_EN bit field In DMA mode, all commands and ++ data are transferred by DMA. DMA can be enable/disable on the fly. ++ Input Parameters: ++ context -Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void ++dfc_set_dma(struct dfc_context* context) ++{ ++ uint32_t ndcr; ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ if (context->dfc_mode->enable_dma) ++ ndcr |= NDCR_DMA_EN; ++ else ++ ndcr &= ~NDCR_DMA_EN; ++ ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ /* Read again to make sure write work */ ++ ndcr = dfc_read(context, DFC_NDCR); ++ return; ++} ++ ++ ++/****************************************************************************** ++ dfc_set_ecc ++ ++ Description: ++ This function enables or disables hardware ECC capability of DFC in line ++ with setting in DFC mode of context structure. ++ Input Parameters: ++ context -Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void ++dfc_set_ecc(struct dfc_context* context) ++{ ++ uint32_t ndcr; ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ if (context->dfc_mode->enable_ecc) ++ ndcr |= NDCR_ECC_EN; ++ else ++ ndcr &= ~NDCR_ECC_EN; ++ ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ /* Read again to make sure write work */ ++ ndcr = dfc_read(context, DFC_NDCR); ++ return; ++} ++ ++/****************************************************************************** ++ dfc_set_spare ++ ++ Description: ++ This function enables or disables accesses to spare area of NAND Flash ++ through DFC in line with setting in DFC mode of context structure. ++ Input Parameters: ++ context -Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void ++dfc_set_spare(struct dfc_context* context) ++{ ++ uint32_t ndcr; ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ if (context->dfc_mode->enable_spare) ++ ndcr |= NDCR_SPARE_EN; ++ else ++ ndcr &= ~NDCR_SPARE_EN; ++ ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ /* Read again to make sure write work */ ++ ndcr = dfc_read(context, DFC_NDCR); ++ return; ++} ++ ++static unsigned int get_delta (unsigned int start) ++{ ++ unsigned int stop = OSCR; ++ return (stop - start); ++} ++ ++static int dfc_wait_event(struct dfc_context *context, uint32_t event, ++ uint32_t *event_out, uint32_t timeout, int enable_int) ++{ ++ uint32_t ndsr; ++ uint32_t to = 3 * timeout; /* 3 ticks ~ 1us */ ++ int status; ++ int start = OSCR; ++ ++ if (enable_int) ++ dfc_enable_int(context, event); ++ ++ while (1) { ++ ndsr = dfc_read(context, DFC_NDSR); ++ ndsr &= NDSR_MASK; ++ if (ndsr & event) { ++ /* event happened */ ++ *event_out = ndsr & event; ++ dfc_clear_int(context, *event_out); ++ status = 0; ++ break; ++ } else if (get_delta(start) > to) { ++ status = -ETIME; ++ break; ++ } ++ } ++ ++ if (enable_int) ++ dfc_disable_int(context, event); ++ return status; ++} ++ ++/****************************************************************************** ++ dfc_get_pattern ++ ++ Description: ++ This function is used to retrieve buffer size setting for a transaction ++ based on cmd. ++ Input Parameters: ++ context - Pointer to DFC context structure ++ cmd ++ Specifies type of command to be sent to NAND flash .The LSB of this ++ parameter defines the first command code for 2-cycles command. The ++ MSB defines the second command code for 2-cycles command. If MSB is ++ set to zero, this indicates that one cycle command ++ Output Parameters: ++ data_size ++ It is used to retrieve length of data transferred to/from DFC, ++ which includes padding bytes ++ padding ++ It is used to retrieve how many padding bytes there should be ++ in buffer of data_size. ++ Returns: ++ 0 ++ If size setting is returned successfully ++ -EINVAL ++ If page size specified in flash spec of context structure is not 512 or ++ 2048;If specified command index is not read1/program/erase/reset/readID/ ++ readStatus. ++*******************************************************************************/ ++int dfc_get_pattern(struct dfc_context *context, uint16_t cmd, ++ int *data_size, int *padding) ++{ ++ struct dfc_mode* dfc_mode = context->dfc_mode; ++ struct dfc_flash_info * flash_info = context->flash_info; ++ uint32_t page_size = context->flash_info->page_size; /* 512 or 2048 */ ++ ++ if (cmd == flash_info->read1 || ++ cmd == flash_info->program) { ++ if (512 == page_size) { ++ /* add for DMA */ ++ if (dfc_mode->enable_dma) { ++ *data_size = DFC_DATA_SIZE_544; ++ if (dfc_mode->enable_ecc) ++ *padding = DFC_PADDING_SIZE_24; ++ else ++ *padding = DFC_PADDING_SIZE_16; ++ } else if (!dfc_mode->enable_spare) { ++ *data_size = DFC_DATA_SIZE_512; ++ *padding = DFC_PADDING_SIZE_0; ++ } else { ++ ++ if (dfc_mode->enable_ecc) ++ *data_size = DFC_DATA_SIZE_520; ++ else ++ *data_size = DFC_DATA_SIZE_528; ++ ++ *padding = DFC_PADDING_SIZE_0; ++ } ++ } else if (2048 == page_size) { ++ /* add for DMA */ ++ if (dfc_mode->enable_dma) { ++ *data_size = DFC_DATA_SIZE_2112; ++ if (dfc_mode->enable_ecc) ++ *padding = DFC_PADDING_SIZE_24; ++ else ++ *padding = DFC_PADDING_SIZE_0; ++ } else if (!dfc_mode->enable_spare) { ++ *data_size = DFC_DATA_SIZE_2048; ++ *padding = DFC_PADDING_SIZE_0; ++ } else { ++ ++ if (dfc_mode->enable_ecc) ++ *data_size = DFC_DATA_SIZE_2088; ++ else ++ *data_size = DFC_DATA_SIZE_2112; ++ ++ *padding = DFC_PADDING_SIZE_0; ++ } ++ } else /* if the page_size is neither 512 or 2048 */ ++ return -EINVAL; ++ } else if (cmd == flash_info->read_id) { ++ *data_size = DFC_DATA_SIZE_ID; ++ *padding = DFC_PADDING_SIZE_0; ++ } else if(cmd == flash_info->read_status) { ++ *data_size = DFC_DATA_SIZE_STATUS; ++ *padding = DFC_PADDING_SIZE_0; ++ } else if (cmd == flash_info->erase || cmd == flash_info->reset) { ++ *data_size = DFC_DATA_SIZE_UNUSED; ++ *padding = DFC_PADDING_SIZE_UNUSED; ++ } else ++ return -EINVAL; ++ return 0; ++} ++ ++ ++/****************************************************************************** ++ dfc_send_cmd ++ ++ Description: ++ This function configures DFC to send command through DFC to NAND flash ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ cmd ++ Specifies type of command to be sent to NAND flash .The LSB of this ++ parameter defines the first command code for 2-cycles command. The ++ MSB defines the second command code for 2-cycles command. If MSB is ++ set to zero, this indicates that one cycle command ++ addr ++ Address sent out to the flash device withthis command. For page read/ ++ program commands , 4-cycles address is sent. For erase command only ++ 3-cycles address is sent. If it is equal to 0xFFFFFFFF, the address ++ should not be used. ++ num_pages ++ It specifies the number of pages of data to be transferred for ++ a program or read commands. Unused for any other commands than ++ read/program. ++ ++ Output Parameters: ++ None ++ Returns: ++ 0 ++ If size setting is returned successfully ++ -EINVAL ++ If specified command index is not read1/program/erase/reset/readID/ ++ readStatus. ++*******************************************************************************/ ++int dfc_send_cmd(struct dfc_context *context, uint16_t cmd, ++ uint32_t addr, int num_pages) ++{ ++ struct dfc_flash_info *flash_info = context->flash_info; ++ struct dfc_mode *dfc_mode = context->dfc_mode; ++ uint8_t cmd2; ++ uint32_t event_out; ++ uint32_t ndcb0=0, ndcb1=0, ndcb2=0, ndcr; ++ int status; ++ ++ /* It is a must to set ND_RUN firstly, then write command buffer ++ * If conversely,it does not work ++ */ ++ dfc_write(context, DFC_NDSR, NDSR_MASK); ++ ++ /* Set ND_RUN */ ++ ndcr = dfc_read(context, DFC_NDCR); ++ dfc_write(context, DFC_NDCR, (ndcr | NDCR_ND_RUN)); ++ ++ // Wait for write command request ++ status = dfc_wait_event(context, NDSR_WRCMDREQ, ++ &event_out, NAND_CMD_TIMEOUT, 0); ++ ++ if (status) /* Timeout */ ++ return status; ++ ++ cmd2 = (cmd>>8) & 0xFF; ++ ndcb0 = cmd | (dfc_mode->chip_select<<24) | ((cmd2?1:0)<<19); ++ ++ if (cmd == flash_info->read1) { ++ if (0xFFFFFFFF != addr) { ++ ndcb0 |= NDCB0_ADDR_CYC(4); ++ status = flash_info->addr2ndcb1(cmd, addr, &ndcb1); ++ if (status) ++ return status; ++ ndcb2 = (num_pages - 1) << 8; ++ } ++ } else if (cmd == flash_info->program) { ++ ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS; ++ ndcb0 |= NDCB0_ADDR_CYC(4); ++ status = flash_info->addr2ndcb1(cmd, addr, &ndcb1); ++ if (status) ++ return status; ++ ndcb2 = (num_pages-1) << 8; ++ } else if (cmd == flash_info->erase) { ++ ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS; ++ ndcb0 |= NDCB0_ADDR_CYC(3); ++ status = flash_info->addr2ndcb1(cmd, addr, &ndcb1); ++ if (status) ++ return status; ++ } else if (cmd == flash_info->read_id) { ++ ndcb0 |= NDCB0_CMD_TYPE(3); ++ } else if(cmd == flash_info->read_status) { ++ ndcb0 |= NDCB0_CMD_TYPE(4); ++ } else if(cmd == flash_info->reset) { ++ ndcb0 |= NDCB0_CMD_TYPE(5); ++ } else if (cmd == flash_info->lock) { ++ ndcb0 |= NDCB0_CMD_TYPE(5); ++ } else ++ return -EINVAL; ++ ++ /* Write to DFC command register */ ++ dfc_write(context, DFC_NDCB0, ndcb0); ++ dfc_write(context, DFC_NDCB0, ndcb1); ++ dfc_write(context, DFC_NDCB0, ndcb2); ++ ++ return 0; ++} ++ ++/****************************************************************************** ++ dfc_stop ++ ++ Description: ++ This function clears ND_RUN bit of NDCR. ++ Input Parameters: ++ context--Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_stop(struct dfc_context *context) ++{ ++ unsigned int ndcr; ++ ndcr = dfc_read(context, DFC_NDCR); ++ dfc_write(context, DFC_NDCR, (ndcr & ~NDCR_ND_RUN)); ++ ndcr = dfc_read(context, DFC_NDCR); ++ ++ return; ++} ++ ++int dfc_setup_cmd_dma(struct dfc_context *context, ++ uint16_t cmd, uint32_t addr, int num_pages, ++ uint32_t *buf, uint32_t buf_phys, ++ uint32_t next_desc_phys, uint32_t dma_int_en, ++ struct pxa_dma_desc *dma_desc) ++{ ++ struct dfc_flash_info *flash_info = context->flash_info; ++ struct dfc_mode *dfc_mode = context->dfc_mode; ++ uint8_t cmd2; ++ uint32_t event_out; ++ uint32_t ndcb0=0, ndcb1=0, ndcb2=0, ndcr; ++ int status; ++ ++ /* ++ * It is a must to set ND_RUN firstly, then write command buffer ++ * If conversely,it does not work ++ */ ++ dfc_write(context, DFC_NDSR, NDSR_MASK); ++ ++ /* Set ND_RUN */ ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr |= NDCR_ND_RUN; ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ /* Wait for write command request */ ++ status = dfc_wait_event(context, NDSR_WRCMDREQ, ++ &event_out, NAND_CMD_TIMEOUT, 0); ++ ++ if (status) ++ return status; /* Timeout */ ++ ++ cmd2 = (cmd>>8) & 0xFF; ++ ndcb0 = cmd | (dfc_mode->chip_select<<24) | ((cmd2?1:0)<<19); ++ ++ if (cmd == flash_info->read1) { ++ if (0xFFFFFFFF != addr) { ++ ndcb0 |= NDCB0_ADDR_CYC(4); ++ status = flash_info->addr2ndcb1(cmd, addr, &ndcb1); ++ if (status) ++ return status; ++ ndcb2 = (num_pages-1) << 8; ++ } ++ } else if (cmd == flash_info->program) { ++ ndcb0 |= NDCB0_CMD_TYPE(1) | NDCB0_AUTO_RS; ++ ndcb0 |= NDCB0_ADDR_CYC(4); ++ ++ status = flash_info->addr2ndcb1(cmd, addr, &ndcb1); ++ if (status) ++ return status; ++ ndcb2 = (num_pages-1) << 8; ++ } else if (cmd == flash_info->erase) { ++ ndcb0 |= NDCB0_CMD_TYPE(2) | NDCB0_AUTO_RS; ++ ndcb0 |= NDCB0_ADDR_CYC(3); ++ ++ status = flash_info->addr2ndcb1(cmd, addr, &ndcb1); ++ if (status) ++ return status; ++ } else if (cmd == flash_info->read_id) { ++ ndcb0 |= NDCB0_CMD_TYPE(3); ++ } else if (cmd == flash_info->read_status) { ++ ndcb0 |= NDCB0_CMD_TYPE(4); ++ } else if (cmd == flash_info->reset) { ++ ndcb0 |= NDCB0_CMD_TYPE(5); ++ } else if (cmd == flash_info->lock) { ++ ndcb0 |= NDCB0_CMD_TYPE(5); ++ } else ++ return -EINVAL; ++ ++ *((uint32_t *)buf) = ndcb0; ++ *((uint32_t *)buf + 1) = ndcb1; ++ *((uint32_t *)buf + 2) = ndcb2; ++ ++ dma_int_en &= (DCMD_STARTIRQEN | DCMD_ENDIRQEN); ++ ++ dma_desc->ddadr = next_desc_phys; ++ dma_desc->dsadr = buf_phys; ++ dma_desc->dtadr = NDCB0_DMA_ADDR; ++ dma_desc->dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | dma_int_en | ++ DCMD_WIDTH4 | DCMD_BURST16 | 12; ++ return 0; ++} ++ ++int dfc_setup_data_dma(struct dfc_context* context, ++ uint16_t cmd, uint32_t buf_phys, ++ uint32_t next_desc_phys, uint32_t dma_int_en, ++ struct pxa_dma_desc* dma_desc) ++{ ++ struct dfc_flash_info * flash_info = context->flash_info; ++ int data_size, padding; ++ ++ dfc_get_pattern(context, cmd, &data_size, &padding); ++ ++ dma_desc->ddadr = next_desc_phys; ++ dma_int_en &= (DCMD_STARTIRQEN | DCMD_ENDIRQEN); ++ ++ if (cmd == flash_info->program) { ++ ++ dma_desc->dsadr = buf_phys; ++ dma_desc->dtadr = NDDB_DMA_ADDR; ++ dma_desc->dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | dma_int_en | ++ DCMD_WIDTH4 | DCMD_BURST32 | data_size; ++ ++ } else if (cmd == flash_info->read1 || cmd == flash_info->read_id || ++ cmd == flash_info->read_status) { ++ ++ dma_desc->dsadr = NDDB_DMA_ADDR; ++ dma_desc->dtadr = buf_phys; ++ dma_desc->dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | dma_int_en | ++ DCMD_WIDTH4 | DCMD_BURST32 | data_size; ++ } ++ else ++ return -EINVAL; ++ return 0; ++} ++ ++void dfc_start_cmd_dma(struct dfc_context* context, struct pxa_dma_desc* dma_desc) ++{ ++ DRCMR99 = DRCMR_MAPVLD | context->cmd_dma_ch; /* NAND CMD DRCMR */ ++ DDADR(context->cmd_dma_ch) = (uint32_t)dma_desc; ++ DCSR(context->cmd_dma_ch) |= DCSR_RUN; ++} ++ ++void dfc_start_data_dma(struct dfc_context* context, struct pxa_dma_desc* dma_desc) ++{ ++ DRCMR97 = DRCMR_MAPVLD | context->data_dma_ch; ++ DDADR(context->data_dma_ch) = (uint32_t)dma_desc; ++ DCSR(context->data_dma_ch) |= DCSR_RUN; ++} ++ ++/****************************************************************************** ++ dfc_read_fifo_partial ++ ++ Description: ++ This function reads data from data buffer of DFC.Bytes can be any less than ++ or equal to data_size, the left is ignored by ReadFIFO though they will be ++ read from NDDB to clear data buffer. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ nbytes ++ Indicating how much data should be read into buffer. ++ data_size ++ Specifing length of data transferred to/from DFC, which includes ++ padding bytes ++ Output Parameters: ++ pBuffer ++ Pointer to the data buffer where data should be placed. ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_read_fifo_partial(struct dfc_context *context, uint8_t *buffer, ++ int nbytes, int data_size) ++{ ++ uint32_t data = 0; ++ uint32_t i = 0; ++ uint32_t bytes_multi; ++ uint32_t bytes_remain; ++ ++ ++ if (1 == data_size) { ++ data = dfc_read(context, DFC_NDDB) & 0xFF; ++ *buffer++ = (uint8_t)data; ++ } else if (2 == data_size) { ++ data = dfc_read(context, DFC_NDDB) & 0xFFFF; ++ *buffer++ = data & 0xFF; ++ *buffer++ = (data >> 8) & 0xFF; ++ } else { ++ bytes_multi = (nbytes & 0xFFFFFFFC); ++ bytes_remain = nbytes & 0x03; ++ ++ i = 0; ++ /* Read the bytes_multi*4 bytes data */ ++ while (i < bytes_multi) { ++ data = dfc_read(context, DFC_NDDB); ++ /* FIXME: we don't know whether the buffer ++ * align to 4 bytes or not. Cast the buffer ++ * to int is not safe here. Especially under ++ * gcc 4.x. Used memcpy here. But the memcpy ++ * may be not correct on BE architecture. ++ * --by Yin, Fengwei ++ */ ++ memcpy(buffer, &data, sizeof(data)); ++ i += sizeof(data); ++ buffer += sizeof(data); ++ } ++ ++ /* Read the left bytes_remain bytes data */ ++ if (bytes_remain) { ++ data = dfc_read(context, DFC_NDDB); ++ for (i = 0; i < bytes_remain; i++) ++ *buffer++ = (uint8_t)((data >> (8*i)) & 0xFF); ++ } ++ ++ /* When read the remain bytes, we always read 4 bytes data ++ * to DFC. So the data_size should subtract following number. ++ */ ++ data_size -= bytes_multi + (bytes_remain ? sizeof(data) : 0); ++ ++ /* We need Read data_size bytes data totally */ ++ while (data_size > 0) { ++ data = dfc_read(context, DFC_NDDB); ++ data_size -= sizeof(data); ++ } ++ ++/* ++ while(i < ((uint32_t)data_size) ) { ++ if (i < bytes_multi) { ++ temp = (uint32_t *)buffer; ++ *temp = dfc_reg->nddb; ++ } else if (i == bytes_multi && bytes_remain){ ++ uint32_t j = 0; ++ data = dfc_reg->nddb; ++ while (j++ < bytes_remain) { ++ *buffer++ = (uint8_t) \ ++ ((data>>(8*j)) & 0xFF); ++ } ++ } else { ++ data = dfc_reg->nddb; ++ } ++ i += 4; ++ buffer += 4; ++ } ++*/ ++ } ++ return; ++} ++ ++/****************************************************************************** ++ dfc_write_fifo_partial ++ ++ Description: ++ Write to data buffer of DFC from a buffer. Bytes can be same as ++ data_size, also can be data_size-padding, but can¡¯t be random value, ++ the left will be automatically padded by WriteFIFO. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ bytes ++ Indicating how much data should be read into buffer. ++ data_size ++ Specifing length of data transferred to/from DFC, which includes ++ padding bytes ++ buffer ++ Pointer to the data buffer where data will be taken from to be written ++ to DFC data buffer ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_write_fifo_partial(struct dfc_context *context, uint8_t *buffer, ++ int nbytes, int data_size) ++{ ++ uint32_t i = 0; ++ ++ uint32_t bytes_multi = (nbytes & 0xFFFFFFFC); ++ uint32_t bytes_remain = nbytes & 0x03; ++ uint32_t temp; ++ /* ++ * caller guarantee buffer contains appropriate data thereby ++ * it is impossible for nbytes not to be a multiple of 4 byte ++ */ ++ ++ /* Write the bytes_multi*4 bytes data */ ++ while (i < bytes_multi) { ++ temp = buffer[0] | buffer[1] << 8 | ++ buffer[2] << 16 | buffer[3] << 24; ++ dfc_write(context, DFC_NDDB, temp); ++ buffer += 4; ++ i += 4; ++ } ++ ++ /* Write the left bytes_remain bytes data */ ++ if (bytes_remain) { ++ temp = 0xFFFFFFFF; ++ for (i = 0; i < bytes_remain; i++) ++ temp &= *buffer++ << i*8; ++ ++ dfc_write(context, DFC_NDDB, temp); ++ } ++ ++ /* When write the remain bytes, we always write 4 bytes data ++ * to DFC. So the data_size should subtract following number. ++ */ ++ data_size -= bytes_multi + (bytes_remain ? sizeof(temp) : 0); ++ ++ while (data_size > 0) { ++ dfc_write(context, DFC_NDDB, 0xFFFFFFFF); ++ data_size -= 4; ++ } ++ ++/* ++ while (i < ((uint32_t)data_size)) { ++ if (i < bytes_multi) { ++ temp = (uint32_t *)buffer; ++ dfc_reg->nddb = *temp; ++ } ++ else if (i == bytes_multi && bytes_remain) { ++ uint32_t j = 0, data = 0xFFFFFFFF; ++ while (j < bytes_remain) { ++ data &= (uint8_t)(*buffer) << j; ++ buffer++; ++ j++; ++ } ++ dfc_reg->nddb = data; ++ } ++ else { ++ dfc_reg->nddb = 0xFFFFFFFF; ++ } ++ i += 4; ++ buffer += 4; ++ } ++*/ ++ ++ return; ++} ++ ++/****************************************************************************** ++ dfc_read_fifo ++ Description: ++ This function reads data from data buffer of DFC.Bytes can be any less ++ than or equal to data_size, the left is ignored by ReadFIFO though they ++ will be read from NDDB to clear data buffer. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ nbytes ++ Indicating how much data should be read into buffer. ++ data_size ++ Specifing length of data transferred to/from DFC, which includes ++ padding bytes ++ Output Parameters: ++ buffer ++ Pointer to the data buffer where data should be placed. ++ Returns: ++ None ++*******************************************************************************/ ++ ++void dfc_read_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes) ++{ ++ uint32_t i = 0; ++ ++ uint32_t bytes_multi = (nbytes & 0xFFFFFFFC); ++ uint32_t bytes_remain = nbytes & 0x03; ++ uint32_t temp; ++ ++ /* Read the bytes_multi*4 bytes data */ ++ while (i < bytes_multi) { ++ temp = dfc_read(context, DFC_NDDB); ++ /* FIXME: we don't know whether the buffer ++ * align to 4 bytes or not. Cast the buffer ++ * to int is not safe here. Especially under ++ * gcc 4.x. Used memcpy here. But the memcpy ++ * may be not correct on BE architecture. ++ * --by Yin, Fengwei ++ */ ++ memcpy(buffer, &temp, sizeof(temp)); ++ i += sizeof(temp); ++ buffer += sizeof(temp); ++ } ++ ++ /* Read the left bytes_remain bytes data */ ++ temp = dfc_read(context, DFC_NDDB); ++ for (i = 0; i < bytes_remain; i++) { ++ *buffer++ = (uint8_t)((temp >> (8*i)) & 0xFF); ++ } ++ ++/* ++ while (i < bytes_multi) { ++ temp = (uint32_t *)buffer; ++ *temp = dfc_reg->nddb; ++ i += 4; ++ buffer += 4; ++ } ++ ++ if (bytes_remain) { ++ data = dfc_reg->nddb; ++ for (i = 0; i < bytes_remain; i++) { ++ *buffer++ = (uint8_t)((data>>(8*i)) & 0xFF); ++ } ++ } ++*/ ++ ++ return; ++} ++ ++/****************************************************************************** ++ dfc_write_fifo ++ Description: ++ Write to data buffer of DFC from a buffer.Bytes can be same as data_size, ++ also can be data_size-padding, but can¡¯t be random value, the left will ++ be automatically padded by WriteFIFO. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ nbytes ++ Indicating how much data should be read into buffer. ++ data_size ++ Specifing length of data transferred to/from DFC, which includes ++ padding bytes ++ buffer ++ Pointer to the data buffer where data will be taken from to be written to ++ DFC data buffer ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_write_fifo(struct dfc_context *context, uint8_t *buffer, int nbytes) ++{ ++ uint32_t bytes_multi = (nbytes & 0xFFFFFFFC); ++ uint32_t bytes_remain = nbytes & 0x03; ++ uint32_t i=0; ++ uint32_t temp; ++ ++ /* Write the bytes_multi*4 bytes data */ ++ while (i < bytes_multi) { ++ temp = buffer[0] | buffer[1] << 8 | ++ buffer[2] << 16 | buffer[3] << 24; ++ dfc_write(context, DFC_NDDB, temp); ++ buffer += 4; ++ i += 4; ++ } ++ ++ /* Write the left bytes_remain bytes data */ ++ temp = 0xFFFFFFFF; ++ for (i = 0; i < bytes_remain; i++) ++ temp &= *buffer++ << i*8; ++ dfc_write(context, DFC_NDDB, temp); ++ ++/* ++ while (i < nbytes) { ++ temp = (uint32_t *)buffer; ++ dfc_reg->nddb = *temp; ++ i += 4; ++ buffer += 4; ++ } ++*/ ++} ++ ++/****************************************************************************** ++ dfc_read_badblock_addr ++ ++ Description: ++ This function reads bad block address in units of block starting from 0 ++ if bad block is detected. It takes into the account if the operation is ++ for CS0 or CS1 depending on settings of chip_select parameter of DFC ++ Mode structure. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ Output Parameters: ++ pBadBlockAddr ++ Used to retrieve bad block address back to caller if bad block is ++ detected ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_read_badblock_addr(struct dfc_context *context, uint32_t *bbaddr) ++{ ++ uint32_t ndbdr; ++ if (0 == context->dfc_mode->chip_select) ++ ndbdr = dfc_read(context, DFC_NDBDR0); ++ else ++ ndbdr = dfc_read(context, DFC_NDBDR1); ++ ++ if (512 == context->flash_info->page_size) { ++ ndbdr = (ndbdr >> 5) & 0xFFF; ++ *bbaddr = ndbdr; ++ } else if (2048 == context->flash_info->page_size) { ++ /* 16 bits LB */ ++ ndbdr = (ndbdr >> 8); ++ *bbaddr = ndbdr; ++ } ++ return; ++} ++ ++/****************************************************************************** ++ dfc_enable_int ++ ++ Description: ++ This function is used to enable DFC interrupts. The bits in int_mask ++ will be used to unmask NDCR register to enable corresponding interrupts. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ int_mask ++ Specifies what interrupts to enable ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_enable_int(struct dfc_context *context, uint32_t int_mask) ++{ ++ uint32_t ndcr; ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr &= ~int_mask; ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ return; ++} ++ ++/****************************************************************************** ++ dfc_disable_int ++ ++ Description: ++ This function is used to disable DFC interrupts. ++ The bits inint_mask will be used to mask NDCR register to disable ++ corresponding interrupts. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ int_mask ++ Specifies what interrupts to disable ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_disable_int(struct dfc_context *context, uint32_t int_mask) ++{ ++ uint32_t ndcr; ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr |= int_mask; ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ ndcr = dfc_read(context, DFC_NDCR); ++ return; ++} ++ ++/****************************************************************************** ++ dfc_clear_int ++ ++ Description: ++ This function is used to disable DFC interrupts. ++ The bits in int_mask will be used to clear corresponding interrupts ++ in NDCR register ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ int_mask ++ Specifies what interrupts to clear ++ Output Parameters: ++ None ++ Returns: ++ None ++*******************************************************************************/ ++void dfc_clear_int(struct dfc_context *context, uint32_t int_mask) ++{ ++ dfc_write(context, DFC_NDSR, int_mask); ++ ++ dfc_read(context, DFC_NDSR); ++ return; ++} ++ ++/* ++ * high level primitives ++ */ ++ ++/****************************************************************************** ++ dfc_init ++ ++ Description: ++ This function does entire DFC initialization according to the NAND ++ flash type currently used with platform, including setting MFP, set ++ flash timing, set DFC mode, configuring specified flash parameters ++ in DFC, clear ECC logic and page count register. ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ 0 ++ if MFPRs are set correctly ++ -EINVAL ++ if specified flash is not support by check bytes per page and pages per ++ block ++******************************************************************************/ ++ ++static mfp_cfg_t pxa300_nand_cfg[] = { ++ /* NAND */ ++ MFP_CFG_X(DF_INT_RnB, AF0, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nRE_nOE, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nWE, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_CLE_nOE, AF0, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nADV1_ALE, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nCS0, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nCS1, AF0, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_IO0, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO1, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO2, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO3, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO4, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO5, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO6, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO7, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO8, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO9, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO10, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO11, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO12, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO13, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO14, AF1, DS08X, PULL_LOW), ++}; ++ ++#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) ++ ++int dfc_init(struct dfc_context* context, int type) ++{ ++ int status; ++ struct dfc_flash_info * flash_info; ++ uint32_t ndcr = 0x00000FFF; /* disable all interrupts */ ++ ++ status = dfc_get_flash_info(type, &flash_info); ++ if (status) ++ return status; ++ context->flash_info = flash_info; ++ ++ pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa300_nand_cfg)); ++ //enable_dfc_pins(); ++ ++ dfc_set_timing(context, &context->flash_info->timing); ++ ++ if (flash_info->enable_arbiter) ++ ndcr |= NDCR_ND_ARB_EN; ++ ++ if (64 == flash_info->page_per_block) ++ ndcr |= NDCR_PG_PER_BLK; ++ else if (32 != flash_info->page_per_block) ++ return -EINVAL; ++ ++ if (flash_info->row_addr_start) ++ ndcr |= NDCR_RA_START; ++ ++ ndcr |= (flash_info->read_id_bytes)<<16; ++ ++ ndcr |= (flash_info->dfc_mode) << 21; ++ ++ if (flash_info->ncsx) ++ ndcr |= NDCR_NCSX; ++ ++ if (2048 == flash_info->page_size) ++ ndcr |= NDCR_PAGE_SZ; ++ else if (512 != flash_info->page_size) ++ return -EINVAL; ++ ++ if (16 == flash_info->flash_width) ++ ndcr |= NDCR_DWIDTH_M; ++ else if (8 != flash_info->flash_width) ++ return -EINVAL; ++ ++ if (16 == flash_info->dfc_width) ++ ndcr |= NDCR_DWIDTH_C; ++ else if (8 != flash_info->dfc_width) ++ return -EINVAL; ++ ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ dfc_set_dma(context); ++ dfc_set_ecc(context); ++ dfc_set_spare(context); ++ ++ return 0; ++} ++ ++/****************************************************************************** ++ dfc_init_no_gpio ++ ++ Description: ++ This function does entire DFC initialization according to the NAND ++ flash type currently used with platform, including set flash timing, ++ set DFC mode, configuring specified flash parameters in DFC, clear ++ ECC logic and page count register. The only difference with dfc_init ++ is that it does not set MFP&GPIO, very useful in OS loader ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ 0 ++ if MFPRs are set correctly ++ -EINVAL ++ if specified flash is not support by check bytes per page and pages ++ per block ++******************************************************************************/ ++int dfc_init_no_gpio(struct dfc_context* context, int type) ++{ ++ struct dfc_flash_info * flash_info; ++ uint32_t ndcr = 0x00000FFF; /* disable all interrupts */ ++ int status; ++ ++ status = dfc_get_flash_info(type, &flash_info); ++ if (status) ++ return status; ++ context->flash_info = flash_info; ++ ++ dfc_set_timing(context, &context->flash_info->timing); ++ ++ if (flash_info->enable_arbiter) ++ ndcr |= NDCR_ND_ARB_EN; ++ ++ if (64 == flash_info->page_per_block) ++ ndcr |= NDCR_PG_PER_BLK; ++ else if (32 != flash_info->page_per_block) ++ return -EINVAL; ++ ++ if (flash_info->row_addr_start) ++ ndcr |= NDCR_RA_START; ++ ++ ndcr |= (flash_info->read_id_bytes)<<16; ++ ++ ndcr |= (flash_info->dfc_mode) << 21; ++ ++ if (flash_info->ncsx) ++ ndcr |= NDCR_NCSX; ++ ++ if (2048 == flash_info->page_size) ++ ndcr |= NDCR_PAGE_SZ; ++ else if (512 != flash_info->page_size) ++ return -EINVAL; ++ ++ if (16 == flash_info->flash_width) ++ ndcr |= NDCR_DWIDTH_M; ++ else if (8 != flash_info->flash_width) ++ return -EINVAL; ++ ++ if (16 == flash_info->dfc_width) ++ ndcr |= NDCR_DWIDTH_C; ++ else if (8 != flash_info->dfc_width) ++ return -EINVAL; ++ ++ dfc_write(context, DFC_NDCR, ndcr); ++ ++ dfc_set_dma(context); ++ dfc_set_ecc(context); ++ dfc_set_spare(context); ++ ++ return 0; ++} ++ ++/* ++ * This macro will be used in following NAND operation functions. ++ * It is used to clear command buffer to ensure cmd buffer is empty ++ * in case of operation is timeout ++ */ ++#define ClearCMDBuf() do { \ ++ dfc_stop(context); \ ++ udelay(NAND_OTHER_TIMEOUT); \ ++ } while (0) ++ ++/****************************************************************************** ++ dfc_reset_flash ++ ++ Description: ++ It reset the flash. The function can be called at any time when the ++ device is in Busy state during random read/program/erase mode and ++ reset operation will abort all these operations. After reset operation ++ the device is ready to wait for next command ++ Input Parameters: ++ context ++ Pointer to DFC context structure ++ Output Parameters: ++ None ++ Returns: ++ 0 ++ execution succeeds ++ -ETIME ++ if timeout ++*******************************************************************************/ ++int dfc_reset_flash(struct dfc_context *context) ++{ ++ struct dfc_flash_info *flash_info = context->flash_info; ++ uint32_t event, event_out; ++ unsigned long timeo; ++ int status; ++ ++ /* Send command */ ++ dfc_send_cmd(context, (uint16_t)flash_info->reset, 0xFFFFFFFF, 0); ++ ++ event = (context->dfc_mode->chip_select)? \ ++ NDSR_CS1_CMDD : NDSR_CS0_CMDD; ++ ++ /* Wait for CMDDM(command done successfully) */ ++ status = dfc_wait_event(context, event, &event_out, ++ NAND_OTHER_TIMEOUT, 0); ++ ++ if (status) { ++ ClearCMDBuf(); ++ return status; ++ } ++ ++ ++ /* Wait until flash device is stable or timeout (10ms) */ ++ timeo = jiffies + HZ; ++ do { ++ if (monahans_df_dev_ready(context->mtd)) ++ break; ++ } while (time_before(jiffies, timeo)); ++ ++ return 0; ++} ++ ++int dfc_readid(struct dfc_context *context, uint32_t *id) ++{ ++ struct dfc_flash_info *flash_info = context->flash_info; ++ uint32_t event_out; ++ int status; ++ char tmp[DFC_DATA_SIZE_ID]; ++ ++ /* Send command */ ++ status = dfc_send_cmd(context, (uint16_t)flash_info->read_id, ++ 0xFFFFFFFF, 0); ++ if (status) { ++ ClearCMDBuf(); ++ return status; ++ } ++ ++ /* Wait for CMDDM(command done successfully) */ ++ status = dfc_wait_event(context, NDSR_RDDREQ, &event_out, ++ NAND_OTHER_TIMEOUT, 0); ++ if (status) { ++ ClearCMDBuf(); ++ return status; ++ } ++ dfc_read_fifo_partial(context, (unsigned char *)tmp, ++ context->flash_info->read_id_bytes, DFC_DATA_SIZE_ID); ++ ++ *id = tmp[0] | (tmp[1] << 8); ++ return 0; ++} ++ ++#define ERR_NONE 0x0 ++#define ERR_DMABUSERR (-0x01) ++#define ERR_SENDCMD (-0x02) ++#define ERR_DBERR (-0x03) ++#define ERR_BBERR (-0x04) ++#define ERR_BUSY (-0x05) ++ ++#define STATE_CMD_SEND 0x1 ++#define STATE_CMD_HANDLE 0x2 ++#define STATE_DMA_TRANSFER 0x3 ++#define STATE_DMA_DONE 0x4 ++#define STATE_READY 0x5 ++#define STATE_SUSPENDED 0x6 ++#define STATE_DATA_TRANSFER 0x7 ++ ++#define NAND_RELOC_MAX 127 ++#define NAND_RELOC_HEADER 0x524e ++#define MAX_CHIP 1 ++#define NAND_CMD_DMA_LEN 12 ++ ++#define MAX_TIM_SIZE 0x1000 ++#define MAX_BBT_SLOTS 24 ++ ++struct reloc_item { ++ unsigned short from; ++ unsigned short to; ++}; ++ ++struct reloc_table { ++ unsigned short header; ++ unsigned short total; ++ struct reloc_item reloc[NAND_RELOC_MAX]; ++}; ++ ++struct monahans_dfc_info { ++ unsigned int state; ++ struct dfc_context *context; ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ dma_addr_t data_buf_addr; ++ char *data_buf; ++ int data_dma; ++ struct pxa_dma_desc *data_desc; ++ dma_addr_t data_desc_addr; ++ dma_addr_t cmd_buf_addr; ++ char *cmd_buf; ++ int cmd_dma; ++ struct pxa_dma_desc *cmd_desc; ++ dma_addr_t cmd_desc_addr; ++ u64 dma_mask; ++#else ++ char *data_buf; ++#endif ++ u32 current_slot; ++ struct reloc_table table; ++ unsigned int table_init; ++ /* relate to the command */ ++ unsigned int cmd; ++ unsigned int addr; ++ unsigned int column; ++ int retcode; ++ unsigned int buf_count; ++ struct completion cmd_complete; ++}; ++ ++static struct dfc_mode dfc_mode = ++{ ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ 1, /* enable DMA */ ++#else ++ 0, ++#endif ++ 1, /* enable ECC */ ++ 1, /* enable SPARE */ ++ 0, /* CS0 */ ++}; ++ ++ ++struct dfc_context dfc_context = ++{ ++ 0, /* Initialized at function monahans_df_init() */ ++ &dfc_mode, ++ 0, /* data dma channel */ ++ 0, /* cmd dma channel */ ++ NULL, /* &zylonite_flashinfo */ ++}; ++ ++ ++/* ++ * MTD structure for Zylonite board ++ */ ++static struct mtd_info *monahans_mtd = NULL; ++ ++/* ++ * BootRom and XDB will use last 127 block, and they will keep all the status ++ * of the bootloader and image, so skip the first 2M size and last 2M size ++ */ ++static struct mtd_partition partition_info[] = { ++ { ++ name: "Bootloader", ++//#ifdef CONFIG_CPU_MONAHANS_LV ++ size: 0x00060000, ++//#else ++// size: 0x00040000, ++//#endif ++ offset: 0, ++ mask_flags: MTD_WRITEABLE /* force read-only */ ++ },{ ++ name: "Kernel", ++ size: 0x00200000, ++//#ifdef CONFIG_CPU_MONAHANS_LV ++ offset: 0x00060000, ++//#else ++// offset: 0x00040000, ++//#endif ++ mask_flags: MTD_WRITEABLE /* force read-only */ ++ },{ ++ name: "Filesystem", ++ size: 0x05000000, ++//#ifdef CONFIG_CPU_MONAHANS_LV ++ offset: 0x00260000, ++//#else ++// offset: 0x00240000, ++//#endif ++ }, { ++ name: "MassStorage", ++ size: 0x0, /* It will be set at probe function */ ++ offset: MTDPART_OFS_APPEND /* Append after fs section */ ++ }, { ++ name: "BBT", ++ size: 0x0, /* It will be set at probe function */ ++ offset: MTDPART_OFS_APPEND,/* Append after fs section */ ++ mask_flags: MTD_WRITEABLE /* force read-only */ ++ } ++}; ++ ++#define PART_NUM ARRAY_SIZE(partition_info) ++ ++/* MHN_OBM_V2 is related to BBT in MOBM V2 ++ * MHN_OBM_V3 is related to BBT in MOBM V3 ++ */ ++enum { ++ MHN_OBM_NULL = 0, ++ MHN_OBM_V1, ++ MHN_OBM_V2, ++ MHN_OBM_V3, ++ MHN_OBM_INVAL ++} MHN_OBM_TYPE; ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++static uint8_t scan_main_bbt_pattern[] = { 'p', 'x', 'a', '1' }; ++static uint8_t scan_mirror_bbt_pattern[] = { '0', 'a', 'x', 'p' }; ++ ++static struct nand_bbt_descr monahans_bbt_default = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION, ++ .maxblocks = 2, ++ .len = 2, ++ .offs = 0, ++ .pattern = scan_ff_pattern, ++}; ++ ++static struct nand_bbt_descr monahans_bbt_main = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION, ++ .veroffs = 6, ++ .maxblocks = 2, ++ .offs = 2, ++ .len = 4, ++ .pattern = scan_main_bbt_pattern, ++}; ++ ++static struct nand_bbt_descr monahans_bbt_mirror = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION, ++ .veroffs = 6, ++ .maxblocks = 2, ++ .offs = 2, ++ .len = 4, ++ .pattern = scan_mirror_bbt_pattern, ++}; ++ ++#if 0 ++static struct nand_bbt_descr monahans_bbt_main = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION, ++ .veroffs = 2, ++ .maxblocks = 2, ++ .offs = 0x0, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++static struct nand_bbt_descr monahans_bbt_mirror = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION, ++ .veroffs = 2, ++ .maxblocks = 2, ++ .offs = 0x0, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++#endif ++ ++static struct nand_ecclayout monahans_lb_nand_oob = { ++ .eccbytes = 24, ++ .eccpos = { ++ 40, 41, 42, 43, 44, 45, 46, 47, ++ 48, 49, 50, 51, 52, 53, 54, 55, ++ 56, 57, 58, 59, 60, 61, 62, 63}, ++ .oobfree = { {2, 38} } ++}; ++ ++/* ++ * Monahans OOB size is only 8 bytes, and the rest 8 bytes is controlled by ++ * hardware for ECC. We construct virutal ECC buffer. Acutally, ECC is 6 bytes ++ * and the remain 2 bytes are reserved. ++ */ ++static struct nand_ecclayout monahans_sb_nand_oob = { ++ .eccbytes = 6, ++ .eccpos = {8, 9, 10, 11, 12, 13 }, ++ .oobfree = { {2, 6} } ++}; ++ ++ ++static inline int is_buf_blank(u8 * buf, int size) ++{ ++ int i = 0; ++ while(i < size) { ++ if (*((unsigned long *)(buf + i)) != 0xFFFFFFFF) ++ return 0; ++ i += 4; ++ } ++ if (i > size) { ++ i -= 4; ++ while( i < size) { ++ if(*(buf + i) != 0xFF) ++ return 0; ++ i++; ++ } ++ } ++ return 1; ++} ++ ++static void print_buf(char *buf, int num) ++{ ++ int i = 0; ++ ++ while (i < num) { ++ printk(KERN_ERR "0x%08x: %02x %02x %02x %02x %02x %02x %02x" ++ " %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", ++ (unsigned int) (i), buf[i], buf[i+1], buf[i+2], ++ buf[i+3], buf[i+4], buf[i+5], buf[i+6], buf[i+7], ++ buf[i+8], buf[i+9], buf[i+10],buf[i+11], buf[i+12], ++ buf[i+13], buf[i+14], buf[i+15]); ++ i += 16; ++ } ++} ++ ++static int inline enable_dfc_dma(struct dfc_context *context, int enable) ++{ ++ int ret = dfc_mode.enable_dma; ++ unsigned long ndcr; ++ ++ if (!enable) { ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr &= ~NDCR_DMA_EN; ++ dfc_write(context, DFC_NDCR, ndcr); ++ dfc_mode.enable_dma = 0; ++ } else { ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr |= NDCR_DMA_EN; ++ dfc_write(context, DFC_NDCR, ndcr); ++ dfc_mode.enable_dma = 1; ++ } ++ return ret; ++} ++ ++ ++static void inline dump_info(struct monahans_dfc_info *info) ++{ ++ if (!info) ++ return; ++ ++ printk(KERN_ERR "cmd:0x%x; addr:0x%x; retcode:%d; state:%d \n", ++ info->cmd, info->addr, info->retcode, info->state); ++} ++ ++static void inline enable_hw_ecc(struct dfc_context* context, int enable) ++{ ++ unsigned long ndcr; ++ ++ if (!enable) { ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr &= ~NDCR_ECC_EN; ++ dfc_write(context, DFC_NDCR, ndcr); ++ dfc_mode.enable_ecc = 0; ++ } ++ else { ++ ndcr = dfc_read(context, DFC_NDCR); ++ ndcr |= NDCR_ECC_EN; ++ dfc_write(context, DFC_NDCR, ndcr); ++ dfc_mode.enable_ecc = 1; ++ } ++} ++ ++/* ++ * Now, we are not sure that the NDSR_RDY mean the flash is ready. ++ * Need more test. ++ */ ++static int monahans_df_dev_ready(struct mtd_info *mtd) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ struct dfc_context* context = info->context; ++ ++ return ((dfc_read(context, DFC_NDSR) & NDSR_RDY)); ++} ++ ++/* each read, we can only read 4bytes from NDDB, we must buffer it */ ++static u_char monahans_df_read_byte(struct mtd_info *mtd) ++{ ++ char retval = 0xFF; ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ if (info->column < info->buf_count) { ++ /* Has just send a new command? */ ++ retval = info->data_buf[info->column++]; ++ } ++ return retval; ++} ++ ++static void monahans_df_write_byte(struct mtd_info *mtd, u8 byte) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ info->data_buf[info->column++] = byte; ++} ++ ++static u16 monahans_df_read_word(struct mtd_info *mtd) ++{ ++ u16 retval = 0xFFFF; ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ if (!(info->column & 0x01) && info->column < info->buf_count) { ++ retval = *((u16 *)(info->data_buf+info->column)); ++ info->column += 2; ++ } ++ return retval; ++} ++ ++static void monahans_df_write_word(struct mtd_info *mtd, u16 word) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ if (!(info->column & 0x01) && info->column < info->buf_count) { ++ *((u16 *)(info->data_buf+info->column)) = word; ++ info->column += 2; ++ } ++} ++ ++static void monahans_df_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ int real_len = min((unsigned int)len, info->buf_count - info->column); ++ ++ memcpy(buf, info->data_buf + info->column, real_len); ++ info->column += real_len; ++} ++ ++static void monahans_df_write_buf(struct mtd_info *mtd, ++ const u_char *buf, int len) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ int real_len = min((unsigned int)len, info->buf_count - info->column); ++ ++ memcpy(info->data_buf + info->column, buf, real_len); ++ info->column += real_len; ++} ++ ++static int monahans_df_verify_buf(struct mtd_info *mtd, ++ const u_char *buf, int len) ++{ ++ return 0; ++} ++ ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++static void monahans_dfc_cmd_dma_irq(int channel, void *data, ++ struct pt_regs *regs) ++{ ++ unsigned int dcsr; ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *)data; ++ struct dfc_context* context = info->context; ++ struct dfc_mode* dfc_mode = context->dfc_mode; ++ unsigned int intm; ++ ++ dcsr = DCSR(channel); ++ DCSR(channel) = dcsr; ++ ++ intm = (dfc_mode->chip_select) ? \ ++ (NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD); ++ ++ D1(printk("cmd dma interrupt, channel:%d, DCSR:0x%08x\n", \ ++ channel, dcsr)); ++ ++ if (dcsr & DCSR_BUSERR) { ++ info->retcode = ERR_DMABUSERR; ++ complete(&info->cmd_complete); ++ } else { ++ if ((info->cmd == NAND_CMD_READ0) || ++ (info->cmd == NAND_CMD_READOOB)|| \ ++ (info->cmd == NAND_CMD_READID) || \ ++ (info->cmd == NAND_CMD_STATUS)) { ++ dfc_enable_int(context, NDSR_RDDREQ | NDSR_DBERR); ++ } else if (info->cmd == NAND_CMD_PAGEPROG) ++ dfc_enable_int(context, NDSR_WRDREQ); ++ else if (info->cmd == NAND_CMD_ERASE1) ++ dfc_enable_int(context, intm); ++ } ++ ++ return; ++} ++ ++ ++static void monahans_dfc_data_dma_irq(int channel, void *data, ++ struct pt_regs *regs) ++{ ++ unsigned int dcsr, intm; ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *)data; ++ struct dfc_context* context = info->context; ++ struct dfc_mode* dfc_mode = context->dfc_mode; ++ ++ dcsr = DCSR(channel); ++ DCSR(channel) = dcsr; ++ ++ intm = (dfc_mode->chip_select) ? \ ++ (NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD); ++ ++ D1(printk("data dma interrupt, channel:%d, DCSR:0x%08x\n", ++ channel, dcsr)); ++ if (dcsr & DCSR_BUSERR) { ++ info->retcode = ERR_DMABUSERR; ++ complete(&info->cmd_complete); ++ } ++ ++ if (info->cmd == NAND_CMD_PAGEPROG) { ++ /* DMA interrupt may be interrupted by other IRQs*/ ++ info->state = STATE_DMA_DONE; ++ dfc_enable_int(context, intm); ++ } else { ++ info->state = STATE_READY; ++ complete(&info->cmd_complete); ++ } ++ ++} ++#endif ++ ++static irqreturn_t monahans_dfc_irq(int irq, void *devid) ++{ ++ unsigned int status, event, intm, cmd; ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *)devid; ++ struct dfc_context* context = info->context; ++ struct dfc_mode* dfc_mode = context->dfc_mode; ++ ++ intm = (dfc_mode->chip_select) ? \ ++ (NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD); ++ event = (dfc_mode->chip_select) ? \ ++ (NDSR_CS1_BBD | NDSR_CS1_CMDD) : (NDSR_CS0_BBD | NDSR_CS0_CMDD); ++ ++ status = dfc_read(context, DFC_NDSR); ++ D1(printk("DFC irq, NDSR:0x%x\n", status)); ++ if (status & (NDSR_RDDREQ | NDSR_DBERR)) { ++ if (status & NDSR_DBERR) { ++ info->retcode = ERR_DBERR; ++ } ++ ++ dfc_disable_int(context, NDSR_RDDREQ | NDSR_DBERR); ++ dfc_clear_int(context, NDSR_RDDREQ | NDSR_DBERR); ++ if (info->cmd == NAND_CMD_READID) ++ cmd = context->flash_info->read_id; ++ else if (info->cmd == NAND_CMD_STATUS) ++ cmd = context->flash_info->read_status; ++ else if (info->cmd == NAND_CMD_READ0 || ++ info->cmd == NAND_CMD_READOOB) ++ cmd = context->flash_info->read1; ++ else { ++ printk(KERN_ERR "No according command:0x%x happens\n", ++ info->cmd); ++ goto out; ++ } ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ info->state = STATE_DMA_TRANSFER; ++ dfc_start_data_dma(context, ++ (struct pxa_dma_desc*)info->data_desc_addr); ++#else ++ info->state = STATE_DATA_TRANSFER; ++ complete(&info->cmd_complete); ++#endif ++ } else if (status & NDSR_WRDREQ) { ++ dfc_disable_int(context, NDSR_WRDREQ); ++ dfc_clear_int(context, NDSR_WRDREQ); ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ info->state = STATE_DMA_TRANSFER; ++ dfc_start_data_dma(context, ++ (struct pxa_dma_desc*)info->data_desc_addr); ++#else ++ info->state = STATE_DATA_TRANSFER; ++ complete(&info->cmd_complete); ++#endif ++ } else if (status & event) { ++ if (status & NDSR_CS0_BBD) { ++ info->retcode = ERR_BBERR; ++ } ++ ++ dfc_disable_int(context, intm); ++ dfc_clear_int(context, event); ++ info->state = STATE_READY; ++ complete(&info->cmd_complete); ++ } ++out: ++ return IRQ_HANDLED; ++} ++ ++static int dfc_send_command(struct mtd_info *mtd, unsigned int cmd, ++ unsigned int addr, unsigned int num_pages, ++ unsigned int event) ++{ ++ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ struct dfc_context* context = info->context; ++ int status; ++ int ret; ++ ++ D1(printk("ready send command, cmd:0x%x, at address:0x%x," ++ " num_pages:%d, wait event:0x%x\n", cmd, addr, num_pages, event)); ++ ++ info->state = STATE_CMD_SEND; ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ status = dfc_setup_cmd_dma(context, cmd, addr, num_pages, ++ (uint32_t *)info->cmd_buf, info->cmd_buf_addr, ++ DDADR_STOP, DCMD_ENDIRQEN, info->cmd_desc); ++#else ++ status = dfc_send_cmd(context, cmd, addr, num_pages); ++#endif ++ if (status) { ++ info->retcode = ERR_SENDCMD; ++ dfc_stop(context); ++ udelay(20); ++ printk(KERN_ERR "fail send command\n"); ++ return info->retcode; ++ } ++ info->state = STATE_CMD_HANDLE; ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ dfc_setup_data_dma(context, cmd, info->data_buf_addr, ++ DDADR_STOP, DCMD_ENDIRQEN, info->data_desc); ++ dfc_start_cmd_dma(context, (struct pxa_dma_desc*)info->cmd_desc_addr); ++#endif ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ dfc_enable_int(context, event); ++#endif ++ ret = wait_for_completion_timeout(&info->cmd_complete, 2*HZ); ++ if (!ret){ ++ printk(KERN_ERR "Command time out\n"); ++ dump_info(info); ++ } ++ D1(printk("command return, cmd:0x%x, retcode:%d\n", ++ info->cmd, info->retcode)); ++ return 0; ++} ++ ++static void monahans_df_command(struct mtd_info *mtd, unsigned command, ++ int column, int page_addr ) ++{ ++ struct nand_chip *this = (struct nand_chip *)(mtd->priv); ++ struct monahans_dfc_info *info = ++ (struct monahans_dfc_info *)(this->priv); ++ struct dfc_context *context = info->context; ++ struct dfc_flash_info * flash_info = context->flash_info; ++ int ret, pages_shift; ++ int status; ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ int datasize; ++ int paddingsize; ++#endif ++ unsigned int to; ++ ++ D1(printk("command:0x%x at address:0x%x, column:0x%x\n", ++ command, page_addr, column)); ++ ++ if (info->state != STATE_READY) { ++ printk(KERN_ERR "CHIP is not ready.\n"); ++ dump_info(info); ++ info->retcode = ERR_BUSY; ++ return; ++ } ++ info->retcode = ERR_NONE; ++ pages_shift = this->phys_erase_shift - this->page_shift; ++ if (info->table_init) { ++ to = search_rel_block((page_addr >> pages_shift), mtd); ++ if (to) { ++ page_addr = (to << pages_shift) | (page_addr ++ & ((1 << pages_shift) - 1)); ++ } ++ } ++ ++ switch ( command ) { ++ case NAND_CMD_READOOB: ++ /* ++ * DFC has mark the last 8 bytes OOB data if HARDEARE_ECC is ++ * enabled. We must first disable the HARDWARE_ECC for getting ++ * all the 16 bytes OOB ++ */ ++ enable_hw_ecc(context, 0); ++ info->buf_count = mtd->writesize + mtd->oobsize; ++ info->column = mtd->writesize + column; ++ info->cmd = command; ++ info->addr = page_addr << this->page_shift; ++ ret = dfc_send_command(mtd, flash_info->read1, info->addr, ++ 1, NDSR_RDDREQ | NDSR_DBERR); ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ dfc_get_pattern(info->context, flash_info->read1, &datasize, ++ &paddingsize); ++ dfc_read_fifo_partial(info->context, info->data_buf, ++ min(info->buf_count, datasize), datasize); ++ info->state = STATE_READY; ++#endif ++ /* We only are OOB, so if the data has error, does not matter */ ++ if (info->retcode == ERR_DBERR) ++ info->retcode = ERR_NONE; ++ enable_hw_ecc(context, 1); ++ break; ++ ++ case NAND_CMD_READ0: ++ enable_hw_ecc(context, 1); ++ info->column = column; ++ info->cmd = command; ++ info->buf_count = mtd->writesize + mtd->oobsize; ++ memset(info->data_buf, 0xFF, info->buf_count); ++ info->addr = page_addr << this->page_shift; ++ ++ ret = dfc_send_command(mtd, flash_info->read1, info->addr, ++ 1, NDSR_RDDREQ | NDSR_DBERR); ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ dfc_get_pattern(info->context, flash_info->read1, &datasize, ++ &paddingsize); ++ dfc_read_fifo_partial(info->context, info->data_buf, ++ min(info->buf_count, datasize), datasize); ++ info->state = STATE_READY; ++#endif ++ /* When the data buf is blank, the DFC will report DB error */ ++ if (info->retcode == ERR_DBERR && is_buf_blank(info->data_buf, ++ mtd->writesize)) ++ info->retcode = ERR_NONE; ++ ++ if (info->retcode == ERR_DBERR) { ++ printk(KERN_ERR "DB error at address 0x%x\n", ++ info->addr); ++ print_buf(info->data_buf, info->buf_count); ++ } ++ break; ++ case NAND_CMD_SEQIN: ++ /* Write only OOB? */ ++ ++ info->cmd = command; ++ if (column >= mtd->writesize) { ++ info->buf_count = mtd->writesize + mtd->oobsize; ++ enable_hw_ecc(context, 0); ++ } else { ++ info->buf_count = mtd->writesize + mtd->oobsize; ++ enable_hw_ecc(context, 1); ++ } ++ memset(info->data_buf, 0xFF, mtd->writesize + mtd->oobsize); ++ info->column = column; ++ info->addr = page_addr << this->page_shift; ++ break; ++ case NAND_CMD_PAGEPROG: ++ /* prevois command is NAND_CMD_SEIN ?*/ ++ if (info->cmd != NAND_CMD_SEQIN) { ++ info->cmd = command; ++ info->retcode = ERR_SENDCMD; ++ printk(KERN_ERR "Monahans NAND device: " ++ "No NAND_CMD_SEQIN executed before.\n"); ++ enable_hw_ecc(context, 1); ++ break; ++ } ++ info->cmd = command; ++ ret = dfc_send_command(mtd, flash_info->program, info->addr, ++ 1, NDSR_WRDREQ); ++ ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ if (ret != 0) ++ break; ++ ++ dfc_get_pattern(info->context, flash_info->program, &datasize, ++ &paddingsize); ++ dfc_write_fifo_partial(info->context, info->data_buf, datasize, ++ datasize); ++ ++ if (info->context->dfc_mode->chip_select) ++ dfc_enable_int(info->context, ++ NDSR_CS1_BBD | NDSR_CS1_CMDD); ++ else ++ dfc_enable_int(info->context, ++ NDSR_CS0_BBD | NDSR_CS0_CMDD); ++ ++ ret = wait_for_completion_timeout(&info->cmd_complete, 2*HZ); ++ if (!ret){ ++ printk(KERN_ERR "Programm Command time out\n"); ++ dump_info(info); ++ } ++ ++ if (info->retcode == ERR_BBERR) { ++ mtd->block_markbad(mtd, info->addr); ++ } ++#endif ++ break; ++ case NAND_CMD_ERASE1: ++ info->cmd = command; ++ info->addr = (page_addr >> pages_shift) << this->phys_erase_shift; ++ ++ if (info->context->dfc_mode->chip_select) ++ ret = dfc_send_command(mtd, flash_info->erase, ++ info->addr, 0, NDSR_CS1_BBD | NDSR_CS1_CMDD); ++ else ++ ret = dfc_send_command(mtd, flash_info->erase, ++ info->addr, 0, NDSR_CS0_BBD | NDSR_CS0_CMDD); ++ ++ if (info->retcode == ERR_BBERR) { ++ mtd->block_markbad(mtd, info->addr); ++ } ++ break; ++ case NAND_CMD_ERASE2: ++ break; ++ case NAND_CMD_READID: ++ info->cmd = command; ++ info->buf_count = flash_info->read_id_bytes; ++ info->column = 0; ++ info->addr = 0xFFFFFFFF; ++ ret = dfc_send_command(mtd, flash_info->read_id, info->addr, ++ 0, NDSR_RDDREQ); ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ dfc_get_pattern(info->context, flash_info->read_id, &datasize, ++ &paddingsize); ++ dfc_read_fifo_partial(info->context, info->data_buf, ++ info->buf_count, datasize); ++ info->state = STATE_READY; ++#endif ++ D1(printk("ReadID, [1]:0x%x, [2]:0x%x\n", ++ info->data_buf[0], info->data_buf[1])); ++ break; ++ case NAND_CMD_STATUS: ++ info->cmd = command; ++ info->buf_count = 1; ++ info->column = 0; ++ info->addr = 0xFFFFFFFF; ++ ret = dfc_send_command(mtd, flash_info->read_status, ++ info->addr, 0, NDSR_RDDREQ); ++#ifndef CONFIG_MTD_NAND_MONAHANS_DMA ++ dfc_get_pattern(info->context, flash_info->read_status, ++ &datasize, &paddingsize); ++ dfc_read_fifo_partial(info->context, info->data_buf, ++ info->buf_count, datasize); ++ info->state = STATE_READY; ++#endif ++ break; ++ ++ case NAND_CMD_RESET: ++ status = dfc_reset_flash(&dfc_context); ++ if (status) { ++ printk(KERN_WARNING "Monahans NAND device:" ++ "NAND_CMD_RESET error\n"); ++ } ++ break; ++ default: ++ printk(KERN_WARNING "Monahans NAND device:" ++ "Non-support the command.\n"); ++ break; ++ } ++ ++ if (info->retcode != ERR_NONE) ++ dfc_stop(info->context); ++} ++ ++static void monahans_df_select_chip(struct mtd_info *mtd, int chip) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ if (chip <= MAX_CHIP) ++ info->context->dfc_mode->chip_select = chip; ++ else ++ printk(KERN_ERR "Monahans NAND device:" ++ "not select the NAND chips!\n"); ++} ++ ++static int monahans_df_waitfunc(struct mtd_info *mtd, ++ struct nand_chip *this) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ /* monahans_df_send_command has waited for command complete */ ++ if (this->state == FL_WRITING || this->state == FL_ERASING) { ++ if (info->retcode == ERR_NONE) ++ return 0; ++ else { ++ /* ++ * any error make it return 0x01 which will tell ++ * the caller the erase and write fail ++ */ ++ return 0x01; ++ } ++ } ++ ++ return 0; ++} ++ ++static int monahans_df_calculate_ecc(struct mtd_info *mtd, ++ const u_char *dat, u_char *ecc_code) ++{ ++ return 0; ++} ++ ++static int monahans_df_correct_data(struct mtd_info *mtd, ++ u_char *dat, u_char *read_ecc, u_char *calc_ecc) ++{ ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ /* ++ * Any error include ERR_SEND_CMD, ERR_DBERR, ERR_BUSERR, we ++ * consider it as a ecc error which will tell the caller the ++ * read fail We have distinguish all the errors, but the ++ * nand_read_ecc only check this function return value ++ */ ++ if (info->retcode != ERR_NONE) ++ return -1; ++ ++ return 0; ++} ++ ++static void monahans_df_enable_hwecc(struct mtd_info *mtd, int mode) ++{ ++ return; ++} ++ ++/* ++ * The relocation table management is different between MOBM V2 and V3. ++ * ++ * MOBM V2 is applied on chips taped out before MhnLV A0. ++ * MOBM V3 is applied on chips taped out after MhnLV A0. It's also applied ++ * on MhnLV A0. ++ */ ++static int calc_obm_ver(void) ++{ ++ unsigned int cpuid; ++ /* read CPU ID */ ++ __asm__ ( ++ "mrc p15, 0, %0, c0, c0, 0\n" ++ : "=r" (cpuid) ++ ); ++ /* It's not xscale chip. */ ++ if ((cpuid & 0xFFFF0000) != 0x69050000) ++ return MHN_OBM_INVAL; ++ /* It's MhnP Ax */ ++ if ((cpuid & 0x0000FFF0) == 0x00006420) ++ return MHN_OBM_V2; ++ /* It's MhnP Bx */ ++ if ((cpuid & 0x0000FFF0) == 0x00006820) { ++ if ((cpuid & 0x0F) <= 5) ++ return MHN_OBM_V2; ++ else ++ return MHN_OBM_V3; ++ } ++ /* It's MhnL Ax */ ++ if ((cpuid & 0x0000FFF0) == 0x00006880) { ++ if ((cpuid & 0x0F) == 0) ++ return MHN_OBM_V2; ++ else ++ return MHN_OBM_V3; ++ } ++ /* It's MhnLV Ax */ ++ if ((cpuid & 0x0000FFF0) == 0x00006890) ++ return MHN_OBM_V3; ++ return MHN_OBM_INVAL; ++} ++ ++ ++/* ++ * MOBM maintains a relocation table. It's used to replace bad blocks. ++ * If block A is bad, it will use block B instead. ++ * There're 127 relocated blocks. All of them reside in the bottom of NAND ++ * flash. So they're reserved and can't be calculated in mtd size and chip ++ * size. ++ */ ++static int read_reloc_table(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = NULL; ++ struct monahans_dfc_info *info = NULL; ++ struct dfc_context *context = NULL; ++ struct reloc_table *table = NULL; ++ int page, maxslot; ++ int obm, valid; ++ ++ obm = calc_obm_ver(); ++ this = (struct nand_chip *)(mtd->priv); ++ info = (struct monahans_dfc_info *)(this->priv); ++ context = info->context; ++ ++ mtd->size -= (NAND_RELOC_MAX * mtd->erasesize); ++ this->chipsize -= (NAND_RELOC_MAX << this->phys_erase_shift); ++ page = (1 << (this->phys_erase_shift - this->page_shift)) - 1; ++ ++ this->select_chip(mtd, 0); ++ valid = 0; ++ if (obm == MHN_OBM_V2) { ++ /* On MOBM V2, the relocation table resides in the last page ++ * of the first block. ++ */ ++ memset(info->data_buf, 0, BUFLEN); ++ monahans_df_command(mtd, NAND_CMD_READ0, 0, page); ++ memcpy(((unsigned char *)&(info->table)), info->data_buf, ++ sizeof(struct reloc_table)); ++ if (info->table.header == NAND_RELOC_HEADER) ++ valid = 1; ++ } else if (obm == MHN_OBM_V3) { ++ /* On MOBM V3, there're several relocation tables in the first ++ * block. ++ * When new bad blocks are found, a new relocation table will ++ * be generated and written back to the first block. But the ++ * original relocation table won't be erased. Even if the new ++ * relocation table is written wrong, system can still find an ++ * old one. ++ * One page contains one slot. ++ */ ++ maxslot = 1 << (this->phys_erase_shift - this->page_shift); ++ page = maxslot - MAX_BBT_SLOTS; ++ for (; page < maxslot; page++) { ++ monahans_df_command(mtd, NAND_CMD_READ0, 0, page); ++ table = (struct reloc_table *)info->data_buf; ++ if (info->retcode == ERR_NONE) { ++ if (table->header != NAND_RELOC_HEADER) { ++ continue; ++ } else { ++ memcpy(((unsigned char *)&(info->table)), ++ table, sizeof(struct reloc_table)); ++ valid = 1; ++ break; ++ } ++ } ++ } ++ ++ } else { ++ printk(KERN_ERR "The version of MOBM isn't supported\n"); ++ } ++ if (valid) { ++ memcpy(((unsigned char *)&(info->table)), info->data_buf, ++ sizeof(struct reloc_table)); ++ printk(KERN_DEBUG "relocation table at page:%d\n", page); ++ PRINT_BUF((unsigned char *)&(info->table), ++ sizeof(struct reloc_table)); ++ info->table_init = 1; ++ } else { ++ /* There should be a valid relocation table slot at least. */ ++ printk(KERN_ERR "NO VALID relocation table can be \ ++ recognized\n"); ++ printk(KERN_ERR "CAUTION: It may cause unpredicated error\n"); ++ printk(KERN_ERR "Please re-initialize the NAND flash.\n"); ++ memset((unsigned char *)&(info->table), 0, ++ sizeof(struct reloc_table)); ++ info->table_init = 0; ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++/* add the relocation entry into the relocation table ++ * It's valid on MOBM V3. ++ * If the relocated block is bad, an new entry will be added into the ++ * bottom of the relocation table. ++ */ ++static int update_rel_table(struct mtd_info *mtd, int block) ++{ ++ struct nand_chip *this = NULL; ++ struct monahans_dfc_info *info = NULL; ++ struct reloc_table *table = NULL; ++ int obm, reloc_block; ++ ++ this = (struct nand_chip *)(mtd->priv); ++ info = (struct monahans_dfc_info *)(this->priv); ++ obm = calc_obm_ver(); ++ if (obm == MHN_OBM_V3) { ++ table = &info->table; ++ if (info->table_init == 0) { ++ printk(KERN_ERR "Error: the initial relocation \ ++ table can't be read\n"); ++ memset(table, 0, sizeof(struct reloc_table)); ++ table->header = NAND_RELOC_HEADER; ++ info->table_init = 1; ++ } ++ if (table->total == 0) { ++ /* Point to the first relocated block. ++ * It resides in the last block of flash. ++ * the relocation entry has calculated in ++ * chipsize ++ */ ++ reloc_block = (this->chipsize ++ >> this->phys_erase_shift) ++ + NAND_RELOC_MAX - 1; ++ } else if (table->total < NAND_RELOC_MAX) { ++ reloc_block = table->reloc[table->total - 1].to - 1; ++ } else { ++ printk(KERN_ERR "Relocation table exceed max number, \ ++ cannot mark block 0x%x as bad block\n", block); ++ return -ENOSPC; ++ } ++ /* Make sure that reloc_block is pointing to a valid block */ ++ for (; ; reloc_block--) { ++ /* The relocate table is full */ ++ if (reloc_block < (this->chipsize ++ >> this->phys_erase_shift)) ++ return -ENOSPC; ++ this->cmdfunc(mtd, NAND_CMD_ERASE1, 0, reloc_block ++ << (this->phys_erase_shift ++ - this->page_shift)); ++ if (info->retcode == ERR_NONE) ++ break; ++ } ++ /* Create the relocated block information in the table */ ++ table->reloc[table->total].from = block; ++ table->reloc[table->total].to = reloc_block; ++ table->total++; ++ } ++ return 0; ++} ++ ++/* Write the relocation table back to device, if there's room. */ ++static int sync_rel_table(struct mtd_info *mtd, int *idx) ++{ ++ struct nand_chip *this = NULL; ++ struct monahans_dfc_info *info = NULL; ++ int obm, start_page, len; ++ ++ if (*idx >= MAX_BBT_SLOTS) { ++ printk(KERN_ERR "Can't write relocation table to device \ ++ any more.\n"); ++ return -1; ++ } ++ if (*idx < 0) { ++ printk(KERN_ERR "Wrong Slot is specified.\n"); ++ return -1; ++ } ++ this = (struct nand_chip *)(mtd->priv); ++ info = (struct monahans_dfc_info *)(this->priv); ++ len = 4; ++ len += info->table.total << 2; ++ obm = calc_obm_ver(); ++ if (obm == MHN_OBM_V3) { ++ /* write to device */ ++ start_page = 1 << (this->phys_erase_shift - this->page_shift); ++ start_page = start_page - 1 - *idx; ++ memset(&(info->data_buf), 0xFF, BUFLEN); ++ memcpy(&(info->data_buf), &(info->table), len); ++ ++ printk(KERN_DEBUG "DUMP relocation table before write. \ ++ page:0x%x\n", start_page); ++ monahans_df_command(mtd, NAND_CMD_SEQIN, 0, start_page); ++ monahans_df_command(mtd, NAND_CMD_PAGEPROG, 0, start_page); ++ /* write to idx */ ++ (*idx)++; ++ /* dump it */ ++ memset(&(info->data_buf), 0, BUFLEN); ++ monahans_df_command(mtd, NAND_CMD_READOOB, 0, start_page); ++ PRINT_BUF(info->data_buf, len); ++ } ++ return 0; ++} ++ ++ ++/* Find the relocated block of the bad one. ++ * If it's a good block, return 0. Otherwise, return a relocated one. ++ * idx points to the next relocation entry ++ * If the relocated block is bad, an new entry will be added into the ++ * bottom of the relocation table. ++ */ ++static unsigned short search_rel_block(int block, struct mtd_info *mtd) ++{ ++ struct nand_chip *this = NULL; ++ struct monahans_dfc_info *info = NULL; ++ struct reloc_table *table = NULL; ++ int i, max, reloc_block = 0; ++ ++ this = (struct nand_chip *)(mtd->priv); ++ info = (struct monahans_dfc_info *)(this->priv); ++ table = &(info->table); ++ if ((block <= 0) || (block > this->chipsize) ++ || (info->table_init == 0) || (table->total == 0)) ++ return 0; ++ if (table->total > NAND_RELOC_MAX) ++ table->total = NAND_RELOC_MAX; ++ max = table->total; ++ for (i = 0; i < max; i++) { ++ if (block == table->reloc[i].from) ++ reloc_block = table->reloc[i].to; ++ } ++ return reloc_block; ++} ++ ++/* ++ * Check whether the block is a bad one. ++ * At first, it will search the relocation table. ++ * If necessary, it will search the BBT. Because relocation table can only ++ * maintain limited record. If there're more bad blocks, they can't be ++ * recorded in relocation table. They can only be recorded in BBT. ++ */ ++static int monahans_df_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) ++{ ++ struct nand_chip *this = NULL; ++ int page, block, reloc_block, chipnr, res = 0; ++ u16 bad; ++ ++ /* At here, we only support one flash chip */ ++ this = (struct nand_chip *)mtd->priv; ++ block = (int)(ofs >> this->phys_erase_shift); ++ /* search the block in the relocation table */ ++ reloc_block = search_rel_block(block, mtd); ++ if (reloc_block) { ++ ofs = ((reloc_block << this->phys_erase_shift) | ++ (ofs & ((1 << this->phys_erase_shift) - 1))); ++ } ++ ++ /* search BBT ++ * Maybe the relocation table is full, but some bad blocks aren't ++ * recordered in it. ++ * The below code are copied from nand_block_bad(). ++ */ ++ if (getchip) { ++ page = (int)(ofs >> this->page_shift); ++ chipnr = (int)(ofs >> this->chip_shift); ++ ++ /* Select the NAND chips */ ++ this->select_chip(mtd, chipnr); ++ } else ++ page = (int)ofs; ++ ++ if (this->options & NAND_BUSWIDTH_16) { ++ this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, ++ page & this->pagemask); ++ bad = cpu_to_le16(this->read_word(mtd)); ++ if (this->badblockpos & 0x1) ++ bad >>= 1; ++ if ((bad & 0xFF) != 0xFF) ++ res = 1; ++ } else { ++ this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos, ++ page & this->pagemask); ++ if (this->read_byte(mtd) != 0xFF) ++ res = 1; ++ } ++ ++ return res; ++} ++ ++static int monahans_df_block_markbad(struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_chip *this = NULL; ++ struct monahans_dfc_info *info = NULL; ++ unsigned char buf[2] = {0, 0}; ++ int block, reloc_block, page, ret; ++ ++ this = (struct nand_chip *)mtd->priv; ++ info = (struct monahans_dfc_info *)(this->priv); ++ /* Get block number */ ++ block = ((int)ofs) >> this->bbt_erase_shift; ++ ret = update_rel_table(mtd, block); ++ if (!ret) { ++ sync_rel_table(mtd, &(info->current_slot)); ++ return 0; ++ } else { ++ reloc_block = search_rel_block(block, mtd); ++ if (reloc_block) ++ block = reloc_block; ++ if (this->bbt) ++ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); ++ } ++ ++ /* Do we have a flash based bad block table ? */ ++ if (this->options & NAND_USE_FLASH_BBT) ++ return nand_update_bbt(mtd, ofs); ++ ++ /* mark the bad block flag at the first two pages */ ++ page = block << (this->phys_erase_shift - this->page_shift); ++ ofs = mtd->writesize + this->badblockpos; ++ this->cmdfunc(mtd, NAND_CMD_SEQIN, ofs, page); ++ this->write_buf(mtd, buf, 2); ++ this->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); ++ page++; ++ this->cmdfunc(mtd, NAND_CMD_SEQIN, ofs, page); ++ this->write_buf(mtd, buf, 2); ++ this->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); ++ return 0; ++} ++ ++static int dump_bbt_flash(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = NULL; ++ struct monahans_dfc_info *info = NULL; ++ int block, page, totlen; ++ ++ this = (struct nand_chip *)mtd->priv; ++ info = (struct monahans_dfc_info *)this->priv; ++ block = (this->chipsize >> this->phys_erase_shift) - 1; ++ totlen = (this->chipsize >> this->phys_erase_shift) >> 2; ++ printk(KERN_ERR "totlen:0x%x\n", totlen); ++ this->select_chip(mtd, 0); ++ if (this->bbt_td) { ++ printk(KERN_ERR "BBT page:0x%x\n", this->bbt_td->pages[0]); ++ page = this->bbt_td->pages[0]; ++ if (this->bbt_td->pages[0] <= 0) { ++ page = block << (this->phys_erase_shift ++ - this->page_shift); ++ } ++ while (totlen > 0) { ++ printk(KERN_ERR "page:0x%x\n", page); ++ monahans_df_command(mtd, NAND_CMD_READ0, 0, page); ++ printk(KERN_ERR "read result:0x%x\n", info->retcode); ++ PRINT_BUF(info->data_buf, BUFLEN); ++ totlen -= (1 << this->page_shift); ++ page++; ++ } ++ } ++ if (this->bbt_md) { ++ printk(KERN_ERR "BBT page:0x%x\n", this->bbt_md->pages[0]); ++ page = this->bbt_md->pages[0]; ++ if (this->bbt_td->pages[0] <= 0) { ++ page = block << (this->phys_erase_shift ++ - this->page_shift); ++ } ++ while (totlen > 0) { ++ printk(KERN_ERR "page:0x%x\n", page); ++ monahans_df_command(mtd, NAND_CMD_READ0, 0, page); ++ printk(KERN_ERR "read result:0x%x\n", info->retcode); ++ PRINT_BUF(info->data_buf, BUFLEN); ++ totlen -= (1 << this->page_shift); ++ page++; ++ } ++ ++ } ++ return 0; ++} ++ ++static int dump_bbt_mem(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = NULL; ++ ++ this = (struct nand_chip *)mtd->priv; ++ PRINT_BUF(this->bbt, 225); ++ return 0; ++} ++ ++static int monahans_df_scan_bbt(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = NULL; ++ int ret; ++ ++ this = (struct nand_chip *)mtd->priv; ++ ret = read_reloc_table(mtd); ++ if (ret) { ++ printk(KERN_ERR "Failed to get relocation table\n"); ++ printk(KERN_ERR "Try to build a new BBT. It may result \ ++ unpredicated error.\n"); ++ /* Create new memory based and flash based BBT */ ++ } ++ nand_scan_bbt(mtd, &monahans_bbt_default); ++ //dump_bbt_flash(mtd); ++ dump_bbt_mem(mtd); ++ return 0; ++#if 0 ++ /* Read flashed based BBT from device */ ++ return (nand_scan_bbt(mtd, &monahans_bbt_main)); ++#endif ++} ++ ++ ++static int monahans_df_probe(struct platform_device *pdev) ++{ ++ struct nand_chip *this; ++ struct monahans_dfc_info *info; ++ int status = -1; ++ unsigned int data_buf_len; ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ unsigned int buf_len; ++#endif ++ int i, ret = 0; ++ ++ printk(KERN_ERR "Nand driver probe\n"); ++ ++ dfc_context.membase = ioremap_nocache(0x43100000, 0x100000); ++ if (!dfc_context.membase) ++ printk(KERN_ERR "Couldn't ioremap\n"); ++ ++ pxa_set_cken(CKEN_NAND, 1); ++ ++ for (i = DFC_FLASH_NULL + 1; i < DFC_FLASH_END; i++) ++ { ++ uint32_t id; ++ ++ status = dfc_init(&dfc_context, i); ++ if (status) ++ continue; ++ status = dfc_readid(&dfc_context, &id); ++ if (status) ++ continue; ++ printk(KERN_DEBUG "id:0x%x, chipid:0x%x\n", ++ id, dfc_context.flash_info->chip_id); ++ if (id == dfc_context.flash_info->chip_id) ++ break; ++ } ++ ++ if(i == DFC_FLASH_END) { ++ printk(KERN_ALERT "Monahans NAND device:" ++ "Nand Flash initialize failure!\n"); ++ ret = -ENXIO; ++ goto out; ++ } ++ flash_config = i; ++ ++ monahans_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip) + ++ sizeof(struct monahans_dfc_info) , GFP_KERNEL); ++ if (!monahans_mtd) { ++ printk (KERN_ERR "Monahans NAND device:" ++ "Unable to allocate NAND MTD device structure.\n"); ++ ret = -ENOMEM; ++ goto out; ++ } ++ ++ /* Get pointer to private data */ ++ this = (struct nand_chip *)((void *)monahans_mtd + sizeof(struct mtd_info)); ++ info = (struct monahans_dfc_info *)((void *)this + sizeof(struct nand_chip)); ++ dfc_context.mtd = monahans_mtd; ++ ++ monahans_mtd->priv = this; ++ this->priv = info; ++ data_buf_len = dfc_context.flash_info->page_size + ++ dfc_context.flash_info->oob_size; ++ info->state = STATE_READY; ++ init_completion(&info->cmd_complete); ++ info->table_init = 0; ++ memset(&info->table, 0x0, sizeof(struct reloc_table)); ++ printk(KERN_DEBUG "%s: this->controller: 0x%x, &this->controller: 0x%x\n",__func__, (unsigned int)this->controller, (unsigned int)&(this->controller)); ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ info->dma_mask = 0xffffffffUL; ++ ++ dev->dma_mask = &info->dma_mask; ++ dev->coherent_dma_mask = 0xffffffffUL; ++ ++ /* alloc dma data buffer for data ++ * buffer + 2*descriptor + command buffer ++ */ ++ buf_len = ALIGN(2*sizeof(struct pxa_dma_desc), 32) + ++ ALIGN(data_buf_len, 32) + ALIGN(NAND_CMD_DMA_LEN, 32); ++ ++ printk(KERN_INFO "Try to allocate dma buffer(len:%d)" ++ "for data buffer + 2*descriptor + command buffer\n", buf_len); ++ info->data_desc = (struct pxa_dma_desc*)dma_alloc_writecombine(dev, ++ buf_len, &info->data_desc_addr, GFP_KERNEL); ++ if (!info->data_desc) { ++ printk(KERN_ERR "Monahans NAND device:" ++ "Unable to alloc dma buffer\n"); ++ ret = -ENOMEM; ++ goto free_mtd; ++ } ++ ++ info->cmd_desc = (struct pxa_dma_desc*)((char *)info->data_desc + ++ sizeof(struct pxa_dma_desc)); ++ info->cmd_desc_addr = (dma_addr_t)((char *)info->data_desc_addr + ++ sizeof(struct pxa_dma_desc)); ++ info->data_buf = (char *)info->data_desc + ++ ALIGN(2*sizeof(struct pxa_dma_desc), 32); ++ info->data_buf_addr = (dma_addr_t)((char *)info->data_desc_addr + ++ ALIGN(2*sizeof(struct pxa_dma_desc), 32)); ++ info->cmd_buf = (char *)info->data_buf + ALIGN(data_buf_len, 32); ++ info->cmd_buf_addr = (dma_addr_t)((char *)info->data_buf_addr + ++ ALIGN(data_buf_len, 32)); ++ ++ D1(printk("Get dma buffer for data dma descriptor, virt:0x%x, phys0x:%x\n", ++ (unsigned int)info->data_desc, info->data_desc_addr)); ++ D1(printk("Get dma buffer for command dma descriptors, virt:0x%x," ++ "phys0x:%x\n", (unsigned int)info->cmd_desc, info->cmd_desc_addr)); ++ D1(printk("Get dma buffer for data, virt:0x%x, phys0x:%x\n", ++ (unsigned int)info->data_buf, info->data_buf_addr)); ++ D1(printk("Get dma buffer for command, virt:0x%x, phys0x:%x\n", ++ (unsigned int)info->cmd_buf, info->cmd_buf_addr)); ++ ++ D1(printk("Try to allocate dma channel for data\n")); ++ ++ info->data_dma = pxa_request_dma("NAND DATA", DMA_PRIO_LOW, ++ monahans_dfc_data_dma_irq, info); ++ if (info->data_dma < 0) { ++ printk(KERN_ERR "Monahans NAND device:" ++ "Unable to alloc dma channel for data\n"); ++ ret = info->data_dma; ++ goto free_buf; ++ } ++ D1(printk("Get dma channel:%d for data\n", info->data_dma)); ++ ++ D1(printk("Try to allocate dma channel for command\n")); ++ info->cmd_dma = pxa_request_dma("NAND CMD", DMA_PRIO_LOW, ++ monahans_dfc_cmd_dma_irq, info); ++ if (info->cmd_dma < 0) { ++ printk(KERN_ERR "Monahans NAND device:" ++ "Unable to alloc dma channel for command\n"); ++ ret = info->cmd_dma; ++ goto free_data_dma; ++ } ++ D1(printk("Get dma channel:%d for command\n", info->cmd_dma)); ++ ++ dfc_context.cmd_dma_ch = info->cmd_dma; ++ dfc_context.data_dma_ch = info->data_dma; ++#else ++ printk(KERN_DEBUG "Try to allocate data buffer(len:%d)\n", data_buf_len); ++ info->data_buf = kmalloc(data_buf_len, GFP_KERNEL); ++ if (!info->data_buf) { ++ printk(KERN_ERR "Monahans NAND device:" ++ "Unable to alloc data buffer\n"); ++ ret = -ENOMEM; ++ goto free_mtd; ++ } ++#endif ++ ++ D1(printk("Try to request irq:%d\n", IRQ_NAND)); ++ ret = request_irq(IRQ_NAND, monahans_dfc_irq, 0, pdev->name, info); ++ if (ret < 0) { ++ printk(KERN_ERR "Monahans NAND device: Unable to request irq\n"); ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ goto free_cmd_dma; ++#else ++ goto free_buf; ++#endif ++ } ++ ++ D1(printk("Success request irq\n")); ++ ++ /* set address of NAND IO lines */ ++ this->options = (dfc_context.flash_info->flash_width == 16)? \ ++ NAND_BUSWIDTH_16: 0 | NAND_USE_FLASH_BBT; ++ ++ /* this->IO_ADDR_R = this->IO_ADDR_W = NDDB */ ++ this->waitfunc = monahans_df_waitfunc; ++ this->select_chip = monahans_df_select_chip; ++ this->dev_ready = monahans_df_dev_ready; ++ this->cmdfunc = monahans_df_command; ++ this->read_word= monahans_df_read_word; ++ /*this->write_word= monahans_df_write_word;*/ ++ this->read_byte = monahans_df_read_byte; ++ this->read_buf = monahans_df_read_buf; ++ this->write_buf = monahans_df_write_buf; ++ this->verify_buf = monahans_df_verify_buf; ++ this->ecc.hwctl = monahans_df_enable_hwecc; ++ this->ecc.calculate = monahans_df_calculate_ecc; ++ this->ecc.correct = monahans_df_correct_data; ++ this->block_bad = monahans_df_block_bad; ++ this->block_markbad = monahans_df_block_markbad; ++ this->scan_bbt = monahans_df_scan_bbt; ++ this->chip_delay= 25; ++ this->bbt_td = &monahans_bbt_main; ++ this->bbt_md = &monahans_bbt_mirror; ++ ++ /* If the NAND flash is small block flash, only 512-byte pagesize ++ * is supported. ++ * Adjust parameters of BBT what is depended on large block nand ++ * flash or small block nand flash. ++ */ ++ if (dfc_context.flash_info->oob_size > 16) { ++ this->ecc.layout = &monahans_lb_nand_oob; ++ this->ecc.mode = NAND_ECC_HW; ++ this->ecc.size = 2048; ++ this->ecc.bytes = 24; ++ this->bbt_td->offs = 2; ++ this->bbt_td->veroffs = 6; ++ this->bbt_md->offs = 2; ++ this->bbt_md->veroffs = 6; ++ this->badblockpos = NAND_LARGE_BADBLOCK_POS; ++ monahans_bbt_default.offs = NAND_LARGE_BADBLOCK_POS; ++ monahans_bbt_default.len = 2; ++ /* when scan_bbt() is executed, bbt version can get */ ++ monahans_bbt_default.veroffs = 2; ++ } else { ++ this->ecc.layout = &monahans_sb_nand_oob; ++ this->ecc.mode = NAND_ECC_HW; ++ this->ecc.size = 512; ++ this->ecc.bytes = 6; ++ this->bbt_td->offs = 8; ++ this->bbt_td->veroffs = 12; ++ this->bbt_md->offs = 8; ++ this->bbt_md->veroffs = 12; ++ this->badblockpos = NAND_SMALL_BADBLOCK_POS; ++ monahans_bbt_default.offs = NAND_SMALL_BADBLOCK_POS; ++ monahans_bbt_default.len = 1; ++ monahans_bbt_default.veroffs = 8; ++ } ++ ++ info->context = &dfc_context; ++ /* TODO: allocate dma buffer and channel */ ++ ++ platform_set_drvdata(pdev, monahans_mtd); ++ ++ if (nand_scan(monahans_mtd, 1)) { ++ printk(KERN_ERR "Nand scan failed\n"); ++ ret = -ENXIO; ++ goto free_irq; ++ } ++ ++ /* There is a potential limitation that no more partition can be ++ * added between MassStorage and BBT(last block). ++ * ++ * The last 127 blocks is reserved for relocation table, they aren't ++ * statistical data of mtd size and chip size. ++ * ++ * BBT partitions contains 4 blocks. Two blocks are used to store ++ * main descriptor, the other two are used to store mirror descriptor. ++ */ ++ partition_info[PART_NUM - 1].size = (monahans_bbt_main.maxblocks ++ + monahans_bbt_mirror.maxblocks) ++ << this->phys_erase_shift; ++ partition_info[PART_NUM - 1].offset = this->chipsize ++ - partition_info[PART_NUM - 1].size; ++ partition_info[PART_NUM - 2].offset = partition_info[PART_NUM - 3].offset ++ + partition_info[PART_NUM - 3].size; ++ partition_info[PART_NUM - 2].size = this->chipsize ++ - partition_info[PART_NUM - 2].offset ++ - partition_info[PART_NUM - 1].size; ++ add_mtd_partitions(monahans_mtd, partition_info, PART_NUM); ++ ++#ifdef CONFIG_DVFM ++ dvfm_notifier.client_data = info; ++ mhn_fv_register_notifier(&dvfm_notifier); ++#endif ++ ++ return 0; ++ ++free_irq: ++ free_irq(IRQ_NAND, info); ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++free_cmd_dma: ++ pxa_free_dma(info->cmd_dma); ++free_data_dma: ++ pxa_free_dma(info->data_dma); ++free_buf: ++ dma_free_writecombine(dev, buf_len, info->data_desc, info->data_desc_addr); ++#else ++free_buf: ++ kfree(info->data_buf); ++#endif ++free_mtd: ++ kfree(monahans_mtd); ++out: ++ return ret; ++ ++} ++ ++static int __devexit monahans_df_remove(struct platform_device *dev) ++{ ++ struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(dev); ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ unsigned int data_buf_len = dfc_context.flash_info->page_size + ++ dfc_context.flash_info->oob_size; ++ unsigned int buf_len = ALIGN(2*sizeof(struct pxa_dma_desc), 32) + ++ ALIGN(data_buf_len, 32) + ALIGN(NAND_CMD_DMA_LEN, 32); ++#endif ++ ++#ifdef CONFIG_DVFM ++ mhn_fv_unregister_notifier(&dvfm_notifier); ++#endif ++ ++ platform_set_drvdata(dev, NULL); ++ ++ del_mtd_device(mtd); ++ del_mtd_partitions(mtd); ++ free_irq(IRQ_NAND, info); ++#ifdef CONFIG_MTD_NAND_MONAHANS_DMA ++ pxa_free_dma(info->cmd_dma); ++ pxa_free_dma(info->data_dma); ++ dma_free_writecombine(dev, buf_len, info->data_desc, ++ info->data_desc_addr); ++#else ++ kfree(info->data_buf); ++#endif ++ kfree(mtd); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int monahans_df_suspend(struct platform_device *dev, pm_message_t state, u32 level) ++{ ++ struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(dev); ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ ++ if( SUSPEND_DISABLE == level){ /*SUSPEND_NOTIFY*/ ++ if (info->state != STATE_READY) { ++ printk(KERN_ERR "current state is %d\n", info->state); ++ return -EAGAIN; ++ } ++ info->state = STATE_SUSPENDED; ++ /* ++ * The PM code need read the mobm from NAND. ++ * So the NAND clock can't be stop here. ++ * The PM code will cover this. ++ */ ++ /* pxa_set_cken(CKEN_NAND, 0); */ ++ } ++ return 0; ++} ++ ++static int monahans_df_resume(struct platform_device *dev, u32 level) ++{ ++ struct mtd_info *mtd = (struct mtd_info *)platform_get_drvdata(dev); ++ struct monahans_dfc_info *info = (struct monahans_dfc_info *) ++ (((struct nand_chip *)(mtd->priv))->priv); ++ int status; ++ ++ if(RESUME_ENABLE == level){ ++ if (info->state != STATE_SUSPENDED) ++ printk(KERN_WARNING "Error State after resume back\n"); ++ ++ info->state = STATE_READY; ++ ++ pxa_set_cken(CKEN_NAND, 1); ++ ++ status = dfc_init(&dfc_context, flash_config); ++ if (status) { ++ printk(KERN_ALERT "Monahans NAND device:" ++ "Nand Flash initialize failure!\n"); ++ return -ENXIO; ++ } ++ } ++ return 0; ++} ++#endif ++ ++#ifdef CONFIG_DVFM ++static int mhn_nand_dvfm_notifier(unsigned cmd, void *client_data, void *info) ++{ ++ struct monahans_dfc_info *dfc_info = ++ (struct monahans_dfc_info *)client_data; ++ ++ switch (cmd) { ++ case FV_NOTIFIER_QUERY_SET : ++ if (dfc_info->state != STATE_READY) ++ return -1; ++ break; ++ ++ case FV_NOTIFIER_PRE_SET : ++ break; ++ ++ case FV_NOTIFIER_POST_SET : ++ break; ++ } ++ ++ return 0; ++} ++#endif ++ ++static struct platform_driver monahans_df_driver = { ++ .probe = monahans_df_probe, ++ .remove = __devexit_p(monahans_df_remove), ++#ifdef CONFIG_PM ++ .suspend = monahans_df_suspend, ++ .resume = monahans_df_resume, ++#endif ++ .driver = { ++ .name = "monahans-nand-flash", ++ } ++}; ++ ++static void __exit monahans_df_cleanup(void) ++{ ++ printk(KERN_ERR "Nand driver registered\n"); ++ platform_driver_unregister(&monahans_df_driver); ++} ++ ++static int __init monahans_df_init(void) ++{ ++ return platform_driver_register(&monahans_df_driver); ++} ++ ++module_init(monahans_df_init); ++module_exit(monahans_df_cleanup); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Jingqing.xu (jingqing.xu@intel.com)"); ++MODULE_DESCRIPTION("Glue logic layer for NAND flash on monahans DFC"); ++ ++ +Index: linux-2.6.23/arch/arm/mach-pxa/zylonite.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/zylonite.c 2008-02-13 00:59:45.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/zylonite.c 2008-02-13 09:11:02.000000000 +0000 +@@ -29,6 +29,8 @@ + #include "generic.h" + + int gpio_backlight; ++int gpio_vsync; ++int gpio_vsync1; + int gpio_eth_irq; + + int lcd_id; +@@ -54,6 +56,16 @@ + .resource = smc91x_resources, + }; + ++static struct platform_device nand_device = { ++ .name = "monahans-nand-flash", ++ .id = -1, ++}; ++ ++static struct platform_device touch_device = { ++ .name = "pxa2xx-touch", ++ .id = -1, ++}; ++ + #if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULES) + static void zylonite_backlight_power(int on) + { +@@ -96,7 +108,7 @@ + }; + + static struct pxafb_mode_info sharp_ls037_modes[] = { +- [0] = { ++ [1] = { + .pixclock = 158000, + .xres = 240, + .yres = 320, +@@ -109,8 +121,8 @@ + .lower_margin = 3, + .sync = 0, + }, +- [1] = { +- .pixclock = 39700, ++ [0] = { ++ .pixclock = 45000, + .xres = 480, + .yres = 640, + .bpp = 16, +@@ -137,6 +149,11 @@ + /* backlight GPIO: output, default on */ + gpio_direction_output(gpio_backlight, 1); + ++ gpio_direction_output(gpio_vsync, 0); ++ gpio_direction_output(gpio_vsync1, 0); ++ ++ printk(KERN_ERR "LCD ID is %x\n", lcd_id); ++ + if (lcd_id & 0x20) { + set_pxa_fb_info(&zylonite_sharp_lcd_info); + return; +@@ -169,6 +186,8 @@ + smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq); + smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq); + platform_device_register(&smc91x_device); ++ platform_device_register(&nand_device); ++ platform_device_register(&touch_device); + + zylonite_init_lcd(); + } +Index: linux-2.6.23/arch/arm/mach-pxa/zylonite_pxa300.c +=================================================================== +--- linux-2.6.23.orig/arch/arm/mach-pxa/zylonite_pxa300.c 2008-02-13 00:59:45.000000000 +0000 ++++ linux-2.6.23/arch/arm/mach-pxa/zylonite_pxa300.c 2008-02-13 14:01:13.000000000 +0000 +@@ -62,12 +62,12 @@ + GPIO110_UART3_RXD, + + /* AC97 */ +- GPIO23_AC97_nACRESET, ++ /*GPIO23_AC97_nACRESET, + GPIO24_AC97_SYSCLK, + GPIO29_AC97_BITCLK, + GPIO25_AC97_SDATA_IN_0, + GPIO27_AC97_SDATA_OUT, +- GPIO28_AC97_SYNC, ++ GPIO28_AC97_SYNC,*/ + + /* Keypad */ + GPIO107_KP_DKIN_0, +@@ -104,6 +104,41 @@ + /* Ethernet */ + GPIO2_nCS3, + GPIO99_GPIO, ++ ++ /* NAND */ ++ MFP_CFG_X(DF_INT_RnB, AF0, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nRE_nOE, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nWE, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_CLE_nOE, AF0, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nADV1_ALE, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nCS0, AF1, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_nCS1, AF0, DS10X, PULL_LOW), ++ MFP_CFG_X(DF_IO0, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO1, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO2, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO3, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO4, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO5, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO6, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO7, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO8, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO9, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO10, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO11, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO12, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO13, AF1, DS08X, PULL_LOW), ++ MFP_CFG_X(DF_IO14, AF1, DS08X, PULL_LOW), ++ ++ /* AC97 */ ++ MFP_CFG_X(GPIO23, AF1, DS03X, PULL_LOW), ++ MFP_CFG_X(GPIO27, AF1, DS03X, PULL_LOW), ++ MFP_CFG_X(GPIO28, AF1, DS03X, PULL_LOW), ++ MFP_CFG_X(GPIO29, AF1, DS03X, PULL_LOW), ++ MFP_CFG_X(GPIO25, AF1, DS03X, PULL_LOW), ++ ++ MFP_CFG_X(GPIO26, AF0, DS01X, PULL_LOW), /* Interrupt */ ++ MFP_CFG_X(GPIO24, AF0, DS03X, PULL_LOW), /*SYSCLK external */ ++ MFP_CFG_X(GPIO11, AF0, DS01X, PULL_LOW), + }; + + static mfp_cfg_t pxa310_mfp_cfg[] __initdata = { +@@ -163,6 +198,9 @@ + pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]); + } + ++extern int gpio_vsync; ++extern int gpio_vsync1; ++ + void __init zylonite_pxa300_init(void) + { + if (cpu_is_pxa300() || cpu_is_pxa310()) { +@@ -174,6 +212,8 @@ + + /* GPIO pin assignment */ + gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20); ++ gpio_vsync = mfp_to_gpio(GPIO76_LCD_VSYNC); ++ gpio_vsync1 = mfp_to_gpio(GPIO71_LCD_LDD_17); + } + + if (cpu_is_pxa300()) { +Index: linux-2.6.23/drivers/video/pxafb.c +=================================================================== +--- linux-2.6.23.orig/drivers/video/pxafb.c 2008-02-13 00:59:45.000000000 +0000 ++++ linux-2.6.23/drivers/video/pxafb.c 2008-02-13 00:59:45.000000000 +0000 +@@ -1543,9 +1543,9 @@ + if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK) + dev_warn(&dev->dev, "machine LCCR0 setting contains illegal bits: %08x\n", + inf->lccr0 & LCCR0_INVALID_CONFIG_MASK); +- if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK) +- dev_warn(&dev->dev, "machine LCCR3 setting contains illegal bits: %08x\n", +- inf->lccr3 & LCCR3_INVALID_CONFIG_MASK); ++ //if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK) ++ // dev_warn(&dev->dev, "machine LCCR3 setting contains illegal bits: %08x\n", ++ // inf->lccr3 & LCCR3_INVALID_CONFIG_MASK); + if (inf->lccr0 & LCCR0_DPD && + ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas || + (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl || +Index: linux-2.6.23/include/asm-arm/arch-pxa/mfp-pxa300.h +=================================================================== +--- linux-2.6.23.orig/include/asm-arm/arch-pxa/mfp-pxa300.h 2008-02-13 00:59:45.000000000 +0000 ++++ linux-2.6.23/include/asm-arm/arch-pxa/mfp-pxa300.h 2008-02-13 00:59:45.000000000 +0000 +@@ -175,13 +175,13 @@ + #define GPIO68_LCD_LDD_14 MFP_CFG_DRV(GPIO68, AF1, DS01X) + #define GPIO69_LCD_LDD_15 MFP_CFG_DRV(GPIO69, AF1, DS01X) + #define GPIO70_LCD_LDD_16 MFP_CFG_DRV(GPIO70, AF1, DS01X) +-#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF1, DS01X) ++#define GPIO71_LCD_LDD_17 MFP_CFG_DRV(GPIO71, AF0, DS01X) + #define GPIO62_LCD_CS_N MFP_CFG_DRV(GPIO62, AF2, DS01X) + #define GPIO72_LCD_FCLK MFP_CFG_DRV(GPIO72, AF1, DS01X) + #define GPIO73_LCD_LCLK MFP_CFG_DRV(GPIO73, AF1, DS01X) + #define GPIO74_LCD_PCLK MFP_CFG_DRV(GPIO74, AF1, DS01X) + #define GPIO75_LCD_BIAS MFP_CFG_DRV(GPIO75, AF1, DS01X) +-#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF2, DS01X) ++#define GPIO76_LCD_VSYNC MFP_CFG_DRV(GPIO76, AF0, DS01X) + + #define GPIO15_LCD_CS_N MFP_CFG_DRV(GPIO15, AF2, DS01X) + #define GPIO127_LCD_CS_N MFP_CFG_DRV(GPIO127, AF1, DS01X) diff --git a/packages/linux/linux-rp-2.6.23/zylonite_touch-r0.patch b/packages/linux/linux-rp-2.6.23/zylonite_touch-r0.patch new file mode 100644 index 0000000000..1c00696051 --- /dev/null +++ b/packages/linux/linux-rp-2.6.23/zylonite_touch-r0.patch @@ -0,0 +1,1548 @@ +Index: linux-2.6.23/drivers/input/touchscreen/Kconfig +=================================================================== +--- linux-2.6.23.orig/drivers/input/touchscreen/Kconfig 2008-02-13 01:12:29.000000000 +0000 ++++ linux-2.6.23/drivers/input/touchscreen/Kconfig 2008-02-13 01:13:20.000000000 +0000 +@@ -54,6 +54,12 @@ + To compile this driver as a module, choose M here: the + module will be called corgi_ts. + ++config TOUCHSCREEN_ZYLONITE ++ tristate "Zylonite touchscreen driver" ++ default y ++ help ++ Say Y here for the Zylonite touchscreen driver ++ + config TOUCHSCREEN_FUJITSU + tristate "Fujitsu serial touchscreen" + select SERIO +Index: linux-2.6.23/drivers/input/touchscreen/Makefile +=================================================================== +--- linux-2.6.23.orig/drivers/input/touchscreen/Makefile 2008-02-13 01:12:29.000000000 +0000 ++++ linux-2.6.23/drivers/input/touchscreen/Makefile 2008-02-13 01:13:38.000000000 +0000 +@@ -19,3 +19,4 @@ + obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o + obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o + obj-$(CONFIG_TOUCHSCREEN_TSC2101) += tsc2101_ts.o ++obj-$(CONFIG_TOUCHSCREEN_ZYLONITE) += zylonite-ts.o +Index: linux-2.6.23/drivers/input/touchscreen/zylonite-ts.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-2.6.23/drivers/input/touchscreen/zylonite-ts.c 2008-02-13 16:19:15.000000000 +0000 +@@ -0,0 +1,1517 @@ ++/* ++ * drivers/input/touchscreen/mhn_audio_touch.c. ++ * ++ * Author: bridge.wu@marvell.com ++ * Created: Nov 17, 2006 ++ * Copyright: Marvell Corporation. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++ ++#include <sound/driver.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/initval.h> ++ ++#include <asm/semaphore.h> ++#include <asm/hardware.h> ++#include <asm/arch/pxa-regs.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/mfp.h> ++//#include <asm/arch/ipmc.h> ++#include <linux/suspend.h> ++#include <linux/spinlock.h> ++ ++//#include <asm/arch/codec/acodec.h> ++//#include <asm/arch/mhn_audio_plat.h> ++ ++#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ ++#define AC97_DIV __REG(0x41340014) ++ ++#define ALSA_ZY_CARD_DEBUG ++#undef ALSA_ZY_CARD_DEBUG ++ ++#define WM_9713_ID 0x4C13 /* this should be the 7E register value */ ++ ++#ifdef ALSA_ZY_CARD_DEBUG ++#define dbg(format, arg...) printk(KERN_DEBUG format, ##arg) ++#else ++#define dbg(format, arg...) ++#endif ++ ++#define DEBUG ++#undef DEBUG ++#ifdef DEBUG ++unsigned int start_time; ++unsigned int end_time; ++unsigned int time; ++#define PRINT_TIME() do {\ ++ time = ((end_time > start_time))?\ ++ (end_time - start_time)*100/325:\ ++ (0xffffffff - start_time + end_time)*100/325;\ ++ printk("\n%s:%dus\n", __FUNCTION__, time);\ ++} while(0) ++#endif ++ ++ ++ ++ ++/* 9713 specific ++ * Register Name Index ++ */ ++#define RESET 0X00 ++#define SPEAKER_VOLUME 0X02 ++#define HEADPHONE_VOLUME 0X04 ++#define OUT3_OUT4_VOLUME 0X06 ++#define MONOVOL_MONOINPGA_ROUTE 0X08 ++#define LINE_IN_PGA_VOL_ROUTE 0X0A ++#define DAC_PGA_VOL_ROUTE 0X0C ++#define MIC_PGA_VOLUME 0X0E ++#define MIC_ROUTING 0X10 ++#define REC_PGA_VOL 0X12 ++#define REC_ROUTE_MUX_SEL 0X14 ++#define PCBEEP_VOL_ROUTE 0X16 ++#define VXDAC_VOLUME_ROUTE 0X18 ++#define AUX_DAC_VOL_ROUTE 0X1A ++#define OUTPUT_PGA_MUX 0X1C ++#define DAC_3D_CTRL_INV_MUX_SEL 0X1E ++#define DAC_TONE_CTRL 0X20 ++#define MIC_BIAS 0X22 ++#define OUTPUT_VOL_MAPPING_JACK 0X24 ++#define POWERDOWN_CTRL_STAT 0X26 ++#define EXTENDED_AUD_ID 0X28 ++#define EXTENDED_AUD_STAT_CTRL 0X2A ++#define AUDIO_DAC_RATE 0X2C ++#define AUX_DAC_RATE 0X2E ++#define AUDIO_ADC_RATE 0X32 ++#define PCM_CODEC_CTRL 0X36 ++#define SPDIF_CTRL 0X3A ++#define POWER_DOWN_1 0X3C ++#define POWER_DOWN_2 0X3E ++#define GENERAL_PURPOSE_WM_13 0X40 ++#define FAST_POWERUP_CTRL 0X42 ++#define MCLK_PLL_CTRL_1 0X44 ++#define MCLK_PLL_CTRL_2 0X46 ++#define GPIO_PIN_CFG 0X4C ++#define GPIO_PIN_POL_TYPE 0X4E ++#define GPIO_PIN_STICKY 0X50 ++#define GPIO_PIN_WAKEUP 0X52 ++#define GPIO_PIN_STATUS 0X54 ++#define GPIO_PIN_SHARING 0X56 ++#define GPIO_PULL_UP_DOWN_CTRL 0X58 ++#define ADD_FUNC_1 0X5A ++#define ADD_FUNC_2 0X5C ++#define ALC_CTRL 0X60 ++#define ALC_NOISE_GATE_CTRL 0X62 ++#define AUX_DAC_INPUT_CTRL 0X64 ++#define TEST_REG_1 0X68 ++#define TEST_REG_2 0X6A ++#define TEST_REG_3 0X6C ++#define TEST_REG_4 0X6E ++#define DIGITIZER_1_WM13 0x74 ++#define DIGITIZER_2_WM13 0x76 ++#define DIGITIZER_3_WM13 0x78 ++#define DIGITIZER_READ_BACK 0x7a ++#define VENDOR_ID1 0x7c ++#define VENDOR_ID2 0x7e ++ ++#define ZY_TOUCH_SAMPLE_X 1 ++#define ZY_TOUCH_SAMPLE_Y 2 ++ ++#define ZY_EVENT_TYPE_NONE 0 ++#define ZY_EVENT_TYPE_PDN 1 ++ ++ ++typedef enum _zy_acodec_error_t { ++ ZY_ACODEC_SUCCESS = 0, /* successful completion of a function */ ++ ZY_ACODEC_GENERAL_SW_ERR, /* null pointer to registers or other software error */ ++ ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT, /* time-out for waiting for respponse */ ++ ZY_ACODEC_SAMPLERATE_NOT_SUPPORTED, /* the sample rate is not supported either in controller or codec */ ++ ZY_ACODEC_FEATURE_NO_SUPPORTED, /* this codec feature is not supported */ ++ ZY_ACODEC_GENERAL_HW_ERR ,/* other hardware error besides time out */ ++ ZY_ACODEC_ROUTE_NO_SUPPORTED, /* the codec can not set the route required */ ++ ZY_ACODEC_SLEEP /* the codec is sleep */ ++} zy_acodec_error_t; ++ ++typedef unsigned int zy_acodec_device_id_t; ++ ++typedef enum _codec_state { ++ ZY_CODEC_SLEEP = 0, ++ ZY_CODEC_WAKEUP = 1 ++} acodec_state_t; ++ ++typedef enum { ++ ZY_FM = 0, ++ ZY_MIC1 = 1, ++ ZY_MIC2 = 2, ++ ZY_SPEAKER =3, ++ ZY_HEADSET =4, ++ ZY_HANDSET =5, ++} vol_port_type_t; ++ ++typedef struct _context_t { ++ int use_count; /* probe/remove and suspend/resume usage count, sync among multiple devices */ ++ zy_acodec_device_id_t acodec_id;/* - an ID that uniquely identifies the codec to be used */ ++ unsigned long init_number; /* used by driver to track whether it is inited or not */ ++ ++ void *p_voice_reg; /* pointer to Monahans registers that has PCM interface to codec */ ++ void *p_hifi_reg; /* pointer to Monahans registers that has hifi interface to codec */ ++ void *p_ctrl_reg; /* pointer to Monahans registers that has control interface to codec */ ++ int *p_ost_regs; /* needed for time out */ ++ void *p_save_memory; /* pointer to a memory region to save context while suspend */ ++ void *p_zy_scenario; /* pointer to the scenario data structure */ ++ long u_max_read_write_time_out_ms;/* input the max time to wait in milliseconds before giving up on a read or write operation */ ++ long u_max_setup_time_out_ms; /* input the maximum time in milliseconds to wait during initial setup of the ACODEC controller and codec */ ++ ++ /* member functions these pointers must be set by */ ++ zy_acodec_error_t (* g_pfn_codec_specific_init) (struct _context_t *p_device_context); ++ zy_acodec_error_t (* g_pfn_codec_specific_dinit) (struct _context_t *p_device_context); ++ zy_acodec_error_t (* g_pfn_acodec_read) (struct _context_t *p_dev_context, unsigned short reg_addr, unsigned short *p_reg_value); ++ zy_acodec_error_t (* g_pfn_acodec_write) (struct _context_t *p_dev_context, unsigned short reg_addr, unsigned short reg_value); ++ ++ /* add for route */ ++ zy_acodec_error_t (* g_pfn_set_route) (struct _context_t *p_device_context, unsigned short * rout_map ,unsigned short* current_map); ++ /* add for sleep the codec */ ++ zy_acodec_error_t (* g_pfn_sleep_codec) (struct _context_t *p_device_context); ++ /* add for Wake up the codec */ ++ zy_acodec_error_t (* g_pfn_wake_codec) (struct _context_t *p_device_context); ++ /* add for get codec state */ ++ zy_acodec_error_t (* g_pfn_get_state) (struct _context_t *p_device_context, acodec_state_t *p_state); ++ /* add for volume */ ++ zy_acodec_error_t (* g_pfn_get_vol)(struct _context_t *p_device_context, vol_port_type_t port, unsigned short *gain_in_db); ++ zy_acodec_error_t (* g_pfn_set_vol)(struct _context_t *p_device_context, vol_port_type_t port, unsigned short gain_in_db); ++ ++ void (* g_pfn_get_event)(struct _context_t *p_device_context, unsigned char * event_type); ++ void (* g_pfn_event_ack)(struct _context_t *p_device_context, unsigned char event_type); ++ zy_acodec_error_t (* g_pfn_enable_touch)(struct _context_t *p_device_context); ++ zy_acodec_error_t (* g_pfn_disable_touch)(struct _context_t *p_device_context); ++} zy_acocec_context_t, *p_zy_acocec_context_t; ++ ++ ++ ++ ++ ++static p_zy_acocec_context_t p_zy_codec_ctxt = NULL; ++ ++#include <linux/input.h> ++//#include <asm/arch/codec/wm9713.h> ++ ++#define PEN_DOWN 1 ++#define PEN_UP 0 ++#define TS_SAMPLE_INTERVAL 1 ++ ++typedef struct { ++ struct input_dev *idev; ++ struct timer_list *timer; ++ int use_count; ++} codec_zy_ts_t; ++ ++codec_zy_ts_t codec_zy_ts; ++ ++static struct input_dev *codec_zy_ts_input; ++ ++#ifdef CONFIG_PM ++static volatile int touch_suspend = 0 ; ++#endif ++ ++#define ZY_AC97_CODEC_REGS_NUM 0x40 ++ ++typedef struct ++{ // Register symbol // Usage ++ volatile unsigned long pocr; // PCM Out Control Register ++ volatile unsigned long picr; // PCM In Control Register ++ volatile unsigned long mccr; // Mic In Control Register ++ volatile unsigned long gcr; // Global Control Register ++ volatile unsigned long posr; // PCM Out Status Register ++ volatile unsigned long pisr; // PCM In Status Register ++ volatile unsigned long mcsr; // Mic In Status Register ++ volatile unsigned long gsr; // Global Status Register ++ volatile unsigned long car; // CODEC Access Register ++ volatile unsigned long pcscr; // PCM Surround Out Control ++ volatile unsigned long pcssr; // PCM Surround Out Status ++ volatile unsigned long pcsdr; // PCM Surround Out Data ++ volatile unsigned long pcclcr; // PCM Center/LFE Out Control ++ volatile unsigned long pcclsr; // PCM Center/LFE Out Status ++ volatile unsigned long pccldr; // PCM Center/LFE Out Data ++ volatile unsigned long reserved1; // ++ volatile unsigned long pcdr; // PCM FIFO Data Register ++ volatile unsigned long reserved2 [0x7]; // 0x4050-0044 through 0x4050-005C ++ volatile unsigned long mcdr; // Mic-in FIFO Data Register ++ volatile unsigned long reserved3 [0x27]; // 0x4050-0064 through 0x4050-00FC ++ volatile unsigned long mocr; // MODEM Out Control Register ++ volatile unsigned long reserved4; ++ volatile unsigned long micr; // MODEM In Control Register ++ volatile unsigned long reserved5; ++ volatile unsigned long mosr; // MODEM Out Status Register ++ volatile unsigned long reserved6; ++ volatile unsigned long misr; // MODEM In Status Register ++ volatile unsigned long reserved7 [0x9]; // 0x4050-011C through 0x4050-013C ++ volatile unsigned long modr; // MODEM FIFO Data Register ++ volatile unsigned long reserved8 [0x2F]; // 0x4050-0144 through 0x4050-01FC ++ // Primary Audio CODEC registers access ++ volatile unsigned long codec_regs_primary_aud [ZY_AC97_CODEC_REGS_NUM]; ++ // Secondary ID 01 Audio CODEC registers access ++ volatile unsigned long codec_regs_secondary_aud [ZY_AC97_CODEC_REGS_NUM]; ++ // Primary MODEM CODEC registers access ++ volatile unsigned long codec_regs_primary_mdm [ZY_AC97_CODEC_REGS_NUM]; ++ // Secondary ID 01 MODEM CODEC registers access ++ volatile unsigned long codec_regs_secondary_mdm [ZY_AC97_CODEC_REGS_NUM]; ++ // Secondary ID 10 MODEM CODEC registers access ++ volatile unsigned long codec_regs_third_mdm [ZY_AC97_CODEC_REGS_NUM]; ++ // Secondary ID 11 MODEM CODEC registers access ++ volatile unsigned long codec_regs_fouth_mdm [ZY_AC97_CODEC_REGS_NUM]; ++ // Secondary ID 10 Audio CODEC registers access ++ volatile unsigned long codec_regs_third_aud [ZY_AC97_CODEC_REGS_NUM]; ++ // Secondary ID 11 Audio CODEC registers access ++ volatile unsigned long codec_regs_fouth_aud [ZY_AC97_CODEC_REGS_NUM]; ++} zy_ac97_acodec_t, *p_zy_ac97acodec_t ; ++ ++ ++/* Constants for the Global Control Register and Global Status Register */ ++ ++// AC97 Global Control Register bit mask constants ++ ++#define ZY_AC97_GCR_GIE_MSK (1u << 0 ) ++#define ZY_AC97_GCR_COLD_RESET_MSK (1u << 1 ) ++#define ZY_AC97_GCR_WARM_RESET_MSK (1u << 2 ) ++#define ZY_AC97_GCR_LINK_OFF_MSK (1u << 3 ) ++#define ZY_AC97_GCR_PCRSM_IEN_MSK (1u << 4 ) ++#define ZY_AC97_GCR_SCRSM_IEN_MSK (1u << 5 ) ++#define ZY_AC97_GCR_PCRDY_IEN_MSK (1u << 8 ) ++#define ZY_AC97_GCR_SCRDY_IEN_MSK (1u << 9 ) ++#define ZY_AC97_GCR_SDONE_IE_MSK (1u << 18) ++#define ZY_AC97_GCR_CDONE_IE_MSK (1u << 19) ++#define ZY_AC97_GCR_nDMAEN_MSK (1u << 24) ++#define ZY_AC97_GCR_CLKBPB_MSK (1u << 31) ++#define ZY_AC97_GCR_FRCRST_MSK (1u << 30) ++// Global Status Register bit mask constants ++ ++#define ZY_AC97_GSR_GSCI_MSK (1u << 0 ) ++#define ZY_AC97_GSR_MIINT_MSK (1u << 1 ) ++#define ZY_AC97_GSR_MOINT_MSK (1u << 2 ) ++#define ZY_AC97_GSR_ACOFFD_MSK (1u << 3 ) ++#define ZY_AC97_GSR_PIINT_MSK (1u << 5 ) ++#define ZY_AC97_GSR_POINT_MSK (1u << 6 ) ++#define ZY_AC97_GSR_MINT_MSK (1u << 7 ) ++#define ZY_AC97_GSR_PCRDY_MSK (1u << 8 ) ++#define ZY_AC97_GSR_SCRDY_MSK (1u << 9 ) ++#define ZY_AC97_GSR_PCRSM_MSK (1u << 10) ++#define ZY_AC97_GSR_SCRSM_MSK (1u << 11) ++#define ZY_AC97_GSR_SLT12_BITS_MSK (7u << 12) ++#define ZY_AC97_GSR_RCS_ERR_MSK (1u << 15) ++#define ZY_AC97_GSR_SDONE_MSK (1u << 18) ++#define ZY_AC97_GSR_CDONE_MSK (1u << 19) ++ ++ ++// Bit mask and values for CAIP bit in car register. ++#define ZY_AC97_CAR_CAIP_MSK (0x1<<0) ++#define ZY_AC97_CAR_CAIP_LOCKED (0x1<<0) ++#define ZY_AC97_CAR_CAIP_CLEAR (0<<0) ++ ++/* Constants for FIFO status reporting and control */ ++ ++// One bit location is used to report FIFO error conditions and clear ++// interrupts on those conditions in the various non-global status registers. ++ ++// ZY_AC97_FIFOSTAT_FIFOE is used in: ++ // posr ++ // pisr ++ // mcsr ++ // mosr ++ // misr ++ ++#define ZY_AC97_FIFOSTAT_FIFOE (1u << 4) ++#define ZY_AC97_FIFOSTAT_EOC (1u << 3) ++#define ZY_AC97_FIFOSTAT_FSR (1u << 2) ++ ++// A different bit location is used to enable or disable interrupts based on ++// FIFO error conditions in the various non-global control registers. ++ ++// ZY_AC97_FIFOCTRL_FEIE is used in: ++ // pocr ++ // picr ++ // mccr ++ // mocr ++ // micr ++ ++#define ZY_AC97_FIFOCTRL_FEIE (1u << 3) ++#define ZY_AC97_FIFOCTRL_FSRIE (1u << 1) ++ ++/* ++******************************************************************************* ++ AC'97 Codec Registers Location and Bit Definition ++******************************************************************************* ++*/ ++ ++/* */ ++ ++ // Includes symbolic values for certain proprietary register asssignments ++ // in AC'97 devices that might be used with ZY_AC97. ++ ++ // Valid for subset of R 2.1 specification. ++ // Leading "e" in comment means it is an "expanded" register definition as ++ // found in one or more of the Appendices A-D of the R 2.1 specification. ++ // Appendix identifier will immediately follow the "e", such as "eA" ++ // R/O indicates read-only ++ // Registers not supported by the assumed controller will be commented out. ++ ++#define ZY_AC97_CR_RESET_ID 0x00 // RESET CODEC TO DEFAULT, get ID info ++#define ZY_AC97_CR_MASTER_VOLUME 0x02 // LINE OUT VOLUME ++#define ZY_AC97_CR_HEADPHONE_VOLUME 0x04 // ++#define ZY_AC97_CR_MASTER_VOLUME_MONO 0x06 // ++#define ZY_AC97_CR_MASTER_TONE_R_L 0x08 // ++#define ZY_AC97_CR_PC_BEEP_VOLUME 0x0A // ++#define ZY_AC97_CR_PHONE_VOLUME 0x0C // ++#define ZY_AC97_CR_MIC_VOLUME 0x0E // micrOPHONE VOLUME/ AGC ++#define ZY_AC97_CR_LINE_IN_VOLUME 0x10 // LINE IN VOLUME ++#define ZY_AC97_CR_CD_VOLUME 0x12 // ++#define ZY_AC97_CR_VIDEO_VOLUME 0x14 // ++#define ZY_AC97_CR_AUX_VOLUME 0x16 // ++#define ZY_AC97_CR_PCM_OUT_VOLUME 0x18 // ++#define ZY_AC97_CR_RECORD_SELECT 0x1A // SELECT LINE IN OR micrOPHONE ++#define ZY_AC97_CR_RECORD_GAIN 0x1C // ++#define ZY_AC97_CR_RECORD_GAIN_MIC 0x1E // ++#define ZY_AC97_CR_GENERAL_PURPOSE 0x20 // ++#define ZY_AC97_CR_CONTROL_3D 0x22 // ++#define ZY_AC97_CR_POWERDOWN_CTRL_STAT 0x26 // POWER MANAGEMENT ++#define ZY_AC97_CR_E_AUDIO_ID 0x28 // eA Extended audio sprt info, R/O ++#define ZY_AC97_CR_E_AUDIO_CTRL_STAT 0x2A // eA Extended audio stat + control ++ ++// ++// Audio Sample Rate Control Registers, 0x2C - 0x34 ++// ++ // eA PCM Front DAC rate control ++#define ZY_AC97_CR_E_ASR_PCM_FRNT_DAC_RT 0x2C // (output slots 3, 4, 6) ++#define ZY_AC97_CR_E_ASR_PCM_LR_ADC_RT 0x32 // eA PCM L+R ADC rate control (3+4) ++#define ZY_AC97_CR_E_ASR_MIC_ADC_RT 0x34 // eA PCM Mic ADC rate control (5) ++ ++ ++#define ZY_AC97_CR_E_MDM_GPIO_PIN_STAT 0x54 ++// ++// 5Ah-7Ah: Vendor Reserved ++// ++// ++// 7Ch-7Eh: Vendor ID registers. Optional but standardized for Plug'n'Play ++// ++#define ZY_AC97_CR_VENDOR_ID1 0x7C ++#define ZY_AC97_CR_VENDOR_ID2 0x7E ++ ++#define ZY_AC97_CR_MAX ZY_AC97_CR_VENDOR_ID2 ++ ++#define ZY_AC97_CR_END_OF_LIST (ZY_AC97_CR_MAX + 2) ++ ++ ++ ++/* Other Constants */ ++ ++// For accessing the Codec mixer registers, each increment of one 32-bit word ++// in processor space increments the addressed mixer register by two. ++// This does not cause any ambiguities because only even mixer register ++// addresses are currently supported (AC '97 spec, R 2.2) ++#define ZY_AC97_CODEC_REGS_PER_WORD 2 ++ ++/* Default timeout and holdtime settings */ ++ ++// timeout in reading and writing codec registers through AC link ++#define ZY_AC97_RW_TIMEOUT_DEF 200 //unit is us ++ ++// timeout in waiting for codec's ready signal during setup process ++#define ZY_AC97_SETUP_TIMEOUT_DEF 500 //unit is us ++ ++// timeout in waiting for locking the link successfully ++#define ZY_AC97_LOCK_TIMEOUT_DEF 300 //unit is us ++ ++// timeout in shutting down the link ++#define ZY_AC97_LINKOFF_TIMEOUT_DEF 500 //unit is us ++ ++// holdtime for keeping nReset signal active(low) in AC link ++#define ZY_AC97_COLD_HOLDTIME 100 //unit is us ++ ++/* ++******************************************************************************* ++ ZY AC97 data structure used in function interface ++******************************************************************************* ++*/ ++ ++typedef struct ++{ ++ unsigned long pocr; // PCM Out Control Register ++ unsigned long picr; // PCM In Control Register ++ unsigned long mccr; // Mic In Control Register ++ unsigned long gcr; // Global Control Register ++ unsigned long pcscr; // PCM Surround Out Control ++ unsigned long pcclcr; // PCM Center/LFE Out Control ++ unsigned long mocr; // MODEM Out Control Register ++ unsigned long micr; // MODEM In Control Register ++}zy_ac97_save_context_t; ++ ++ ++#define AC97_SAVE_CONTEXT_SIZE (sizeof(zy_ac97_save_context_t)) ++ ++static int zy_ac97_acodec_link_lock(p_zy_ac97acodec_t p_ac97_reg) ++{ ++ int status = 1; ++ volatile unsigned long car_tmp; ++ ++ car_tmp = p_ac97_reg->car; ++ if (car_tmp & ZY_AC97_CAR_CAIP_MSK) /* "1" in CAIP bit means lock failed. */ ++ { ++ status = 0; ++ } ++ return (status); ++} ++ ++ ++zy_acodec_error_t zy_ac97_acodec_write (zy_acocec_context_t *p_dev_context, unsigned short offset, unsigned short data) ++{ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ int got_link; ++ unsigned long time_remaining; ++ volatile unsigned long * p_codec_reg; ++ p_zy_ac97acodec_t p_ac97_reg = (p_zy_ac97acodec_t)(p_dev_context->p_ctrl_reg); ++ unsigned long max_rw_time_out_us = (p_dev_context->u_max_read_write_time_out_ms) * 1000; ++ ++ ++ if(offset == ZY_AC97_CR_E_MDM_GPIO_PIN_STAT) ++ {/* it is a special register and sent out on slot 12 */ ++ p_codec_reg = &(p_ac97_reg->codec_regs_primary_mdm[0]); ++ p_codec_reg += offset / ZY_AC97_CODEC_REGS_PER_WORD; ++ /* The data will be sent out on slot 12. */ ++ *p_codec_reg = (unsigned long)data; ++ goto done; ++ } ++ ++ /* Point to specified register within area mapped to target codec regs */ ++ p_codec_reg = &(p_ac97_reg->codec_regs_primary_aud[0]); ++ p_codec_reg += offset / ZY_AC97_CODEC_REGS_PER_WORD; ++ ++ ++ /* Lock the ACLINK */ ++ time_remaining = ZY_AC97_LOCK_TIMEOUT_DEF; ++ do ++ { ++ got_link = zy_ac97_acodec_link_lock(p_ac97_reg); ++ if (0 == got_link) /* 1 usec is a long time. Skip delay if possible. */ ++ { ++ udelay(1); ++ } ++ } /* Wait while time remaining and ACLINK not available */ ++ while (time_remaining-- && (0 == got_link)); ++ ++ if (0 == got_link) /* Didn't get the ACLINK */ ++ { ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ printk(KERN_ERR "AC97 Write Link Timeout\n"); ++ } ++ else /* We got the link. Perform the write operation and don't wait. */ ++ { ++ /* First, clear old write status indication CDONE by writing a ONE to that bit. */ ++ p_ac97_reg->gsr = ZY_AC97_GSR_CDONE_MSK; ++ ++ *p_codec_reg = (unsigned long)data; /* Now the write! */ ++ ++ /* Wait until write cycle is complete. There should be a way ++ * to do this speculatively at the beginning of the procedure. ++ * Need to discover it. Too inefficient to always wait. ++ */ ++ ++ time_remaining = max_rw_time_out_us; ++ do ++ { ++ udelay(1); ++ } /* Wait while time remaining and command I/O still incomplete. */ ++ while ( (time_remaining--) && !(p_ac97_reg->gsr & ZY_AC97_GSR_CDONE_MSK)); ++ if (!(p_ac97_reg->gsr & ZY_AC97_GSR_CDONE_MSK)) ++ { ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ p_ac97_reg->car = ZY_AC97_CAR_CAIP_CLEAR; ++ } ++ } /* Got AC link */ ++ ++done: ++ return(status); ++} /* Ac97CtrlCodecWrite() */ ++ ++#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ ++#define CKENB __REG(0x41340010) ++ ++zy_acodec_error_t zy_ac97_acodec_read (zy_acocec_context_t *p_dev_context, unsigned short offset, unsigned short *pdata) ++{ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ int got_link; ++ unsigned long time_remaining; ++ volatile unsigned long * p_codec_reg; ++ p_zy_ac97acodec_t p_ac97_reg = (p_zy_ac97acodec_t)(p_dev_context->p_ctrl_reg); ++ unsigned long max_rw_time_out_us = (p_dev_context->u_max_read_write_time_out_ms) * 1000; ++ ++ /* Point to specified register within area mapped to target codec regs */ ++ p_codec_reg = &(p_ac97_reg->codec_regs_primary_aud[0]); ++ p_codec_reg += offset / ZY_AC97_CODEC_REGS_PER_WORD; ++ ++ /* Lock the ACLINK */ ++ time_remaining = ZY_AC97_LOCK_TIMEOUT_DEF; ++ do ++ { ++ got_link = zy_ac97_acodec_link_lock(p_ac97_reg); ++ if (0 == got_link) /* 1 usec is a long time. Skip delay if possible. */ ++ { ++ udelay(1); ++ } ++ } /* Wait while time remaining and ACLINK not available */ ++ while (time_remaining-- && (0 == got_link)); ++ ++ if (0 == got_link) /* Didn't get the ACLINK */ ++ { ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ printk(KERN_ERR "AC97 Read Link Timeout\n"); ++ } ++ else /* We got the link. Perform the write operation and don't wait. */ ++ { ++ /* First, clear old read status indications. */ ++ p_ac97_reg->gsr = ZY_AC97_GSR_SDONE_MSK | ZY_AC97_GSR_RCS_ERR_MSK; ++ ++ *pdata = (unsigned short)(*p_codec_reg); /* This is THE DUMMY READ. */ ++ ++ /* Wait for read I/O with codec to complete before doing real read. */ ++ time_remaining = max_rw_time_out_us; ++ do ++ { ++ udelay(1); ++ } /* Wait while time remaining and read I/O still incomplete */ ++ while( (time_remaining--) && (!(p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK)) ); ++ ++ if ((p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK) && (!(p_ac97_reg->gsr & ZY_AC97_GSR_RCS_ERR_MSK)) ) ++ { ++ if (p_ac97_reg->gsr & ZY_AC97_GSR_RCS_ERR_MSK) ++ {/* timeout indicated by RCS bit */ ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ } ++ /* succeed in reading. clear status bits first. */ ++ p_ac97_reg->gsr = ZY_AC97_GSR_SDONE_MSK | ZY_AC97_GSR_RCS_ERR_MSK; ++ *pdata = (unsigned short)(*p_codec_reg); /* THE REAL READ. */ ++ if (*pdata == 0xffff) ++ {/* timeout indicated by returned value */ ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ } ++ /* check later: is second waiting really needed? */ ++ time_remaining = max_rw_time_out_us; ++ do ++ { ++ udelay(1); ++ } /* Wait while time remaining and read I/O still incomplete */ ++ while( (time_remaining--) && (!(p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK)) ); ++ //printk(KERN_ERR "AC97 Read Result %d\n", (p_ac97_reg->gsr & ZY_AC97_GSR_SDONE_MSK) ); ++ } ++ else /* failed */ ++ { ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ p_ac97_reg->car = ZY_AC97_CAR_CAIP_CLEAR; ++ //printk(KERN_ERR "AC97 Read Link Timeout2 %x %x %x\n", CKENA, OSCC, CKENB); ++ } /* else (OK to do real read) */ ++ ++ } /* else (We got the link. Perform the read operations.) */ ++ ++ return (status); ++} ++ ++ ++ ++zy_acodec_error_t zy_acodec_get_adc_sample(zy_acocec_context_t *p_device_context, unsigned short *p_sample_data, unsigned short adc_type, int *p_pen_down) ++{ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ unsigned short value; ++ unsigned long wait; ++ ++ if (adc_type == ZY_TOUCH_SAMPLE_X) ++ { ++ value = 0x202; ++ } ++ else ++ {/* Y sample */ ++ value = 0x204; ++ } ++ ++ status = zy_ac97_acodec_write(p_device_context, DIGITIZER_1_WM13, value); ++ ++ wait = 0; ++ do ++ { ++ status = zy_ac97_acodec_read(p_device_context, DIGITIZER_1_WM13, &value); ++ if ( !(value & 0x200 ) ) ++ { ++ break; ++ } ++ }while ( 100 > wait++ ); ++ ++ status = zy_ac97_acodec_read(p_device_context, DIGITIZER_READ_BACK, &value); ++ if (value & 0x8000) ++ {/* means pen down */ ++ *p_pen_down = 1; ++ } ++ else ++ { ++ *p_pen_down = 0; ++ } ++ *p_sample_data = value & 0xfff; ++ ++ return status; ++} ++ ++ ++ ++/* ++ * add a touch event ++ */ ++static int codec_zy_ts_evt_add(codec_zy_ts_t* ts, u16 pressure, u16 x, u16 y) ++{ ++ /* add event and remove adc src bits */ ++ static u16 pre_press = 0; ++ ++ input_report_abs(ts->idev, ABS_X, x & 0xfff); ++ input_report_abs(ts->idev, ABS_Y, y & 0xfff); ++ if (pressure == pre_press){ ++ pressure--; ++ } ++ pre_press = pressure; ++ input_report_abs(ts->idev, ABS_PRESSURE, pressure & 0xfff); ++ input_sync(ts->idev); ++#ifdef CONFIG_IPM ++ ipm_event_notify(IPM_EVENT_UI, IPM_EVENT_DEVICE_TSI, NULL, 0); ++#endif ++ return 0; ++} ++ ++/* ++ * add a pen up event ++ */ ++static void codec_zy_ts_evt_release(codec_zy_ts_t* ts) ++{ ++ input_report_abs(ts->idev, ABS_PRESSURE, 0); ++ input_sync(ts->idev); ++ ++#ifdef CONFIG_IPM ++ ipm_event_notify(IPM_EVENT_UI, IPM_EVENT_DEVICE_TSI, NULL, 0); ++#endif ++ p_zy_codec_ctxt->g_pfn_event_ack(p_zy_codec_ctxt,ZY_EVENT_TYPE_PDN); ++} ++ ++/* ++ * Kill the touchscreen thread and stop ++ * the touch digitiser. ++ */ ++static void codec_zy_ts_input_close(struct input_dev *idev) ++{ ++ codec_zy_ts_t *ts = (codec_zy_ts_t *) &codec_zy_ts; ++ ++#ifdef CONFIG_PM ++ if(touch_suspend){ ++ pr_info("touch is suspended!\n"); ++ return -1; ++ } ++#endif ++ dbg("close ts input!\n"); ++ if (--ts->use_count == 0) { ++ del_timer(ts->timer); ++ if (ts->timer != NULL) ++ kfree(ts->timer); ++ p_zy_codec_ctxt->g_pfn_disable_touch(p_zy_codec_ctxt); ++ } ++} ++ ++/* ++ * Sample the touchscreen ++ */ ++int ac97_poll_touch(codec_zy_ts_t *ts) ++{ ++ unsigned short x=0, y=0; ++ int if_down= 0; ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ ++#ifdef DEBUG ++ start_time = OSCR; ++#endif ++ ++ /* get x value */ ++ status = zy_acodec_get_adc_sample(p_zy_codec_ctxt, &x, ZY_TOUCH_SAMPLE_X, &if_down); ++ if (ZY_ACODEC_SUCCESS != status ){ ++ return -EIO; ++ } ++ dbg("x:0x%x\n", x); ++ ++ /* the pen is up */ ++ if (1 != if_down){ ++ return PEN_UP; ++ } ++ ++ /* get y vaule */ ++ status = zy_acodec_get_adc_sample(p_zy_codec_ctxt, &y, ZY_TOUCH_SAMPLE_Y, &if_down); ++ if (ZY_ACODEC_SUCCESS != status ){ ++ return -EIO; ++ } ++ dbg("y:0x%x\n",y); ++ ++ /* the pen is up */ ++ if (1 != if_down){ ++ return PEN_UP; ++ } ++ ++ /* the pen is down, can not get the pressure value, ++ * so if pen is down, give the max pressure value ++ */ ++ codec_zy_ts_evt_add(ts,0xfff, x, y); ++ ++#ifdef DEBUG ++ end_time = OSCR; ++ PRINT_TIME(); ++#endif ++ ++ return PEN_DOWN; ++} ++ ++static void touch_timer_handler(unsigned long unused) ++{ ++ int event; ++ codec_zy_ts_t *ts = &codec_zy_ts; ++ ++ event = ac97_poll_touch(ts); ++ ++ if (event == PEN_DOWN) { ++ dbg("pen down!\n"); ++ ts->timer->expires = jiffies + TS_SAMPLE_INTERVAL; ++ add_timer(ts->timer); ++ } else if(event == PEN_UP) { ++ dbg("pen up!\n"); ++ codec_zy_ts_evt_release(ts); ++ } else if(event == -EIO) { ++ printk(KERN_ERR "Access touch interface error!\n"); ++ } ++ return; ++} ++ ++static zy_acodec_error_t zy_ac97_acodec_cold_reset(zy_acocec_context_t * p_ac97_ctxt) ++{ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ p_zy_ac97acodec_t p_ac97 = (p_zy_ac97acodec_t)(p_ac97_ctxt->p_ctrl_reg); ++ int pri_codec_ready; ++ unsigned long time_remaining; ++ ++ p_ac97->gcr = 0; ++ p_ac97->gcr |= ZY_AC97_GCR_CLKBPB_MSK; ++ /* Hold reset active for a minimum time */ ++ udelay(ZY_AC97_COLD_HOLDTIME); ++ p_ac97->gcr &= ~ZY_AC97_GCR_CLKBPB_MSK; ++ ++ /* Deactivate cold reset condition */ ++ p_ac97->gcr |= (ZY_AC97_GCR_COLD_RESET_MSK | ZY_AC97_GCR_WARM_RESET_MSK); ++ ++ ++ pri_codec_ready = 0; ++ time_remaining = (p_ac97_ctxt->u_max_setup_time_out_ms) * 10; ++ do ++ { ++ udelay(1); ++ if (p_ac97->gsr & ZY_AC97_GSR_PCRDY_MSK) ++ pri_codec_ready = 1; ++ } ++ while (time_remaining-- && (pri_codec_ready == 0)); ++ ++ /* Timeout status if some of the devices weren't ready. */ ++ if (pri_codec_ready == 0) ++ { ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ } ++ ++ return (status); ++} ++ ++ ++zy_acodec_error_t zy_ac97_acodec_init(zy_acocec_context_t *p_ac97_ctxt) ++{ ++ zy_acodec_error_t status ; ++ ++ status = zy_ac97_acodec_cold_reset(p_ac97_ctxt); ++ ++ return (status); ++} ++ ++ ++/* ++ * Start the touchscreen thread and ++ * the touch digitiser. ++ */ ++static int codec_zy_ts_input_open(struct input_dev *idev) ++{ ++ codec_zy_ts_t *ts = (codec_zy_ts_t *) &codec_zy_ts; ++ ++#ifdef CONFIG_PM ++ if(touch_suspend){ ++ pr_info("touch is suspended!\n"); ++ return -1; ++ } ++#endif ++ ++ if (ts->use_count++ > 0) ++ return 0; ++ ++ dbg("Touch is opened. Use count: %d\n", ts->use_count); ++ ts->idev = idev; ++ ts->timer = kmalloc(sizeof(struct timer_list), GFP_KERNEL); ++ if (!ts->timer) { ++ printk(KERN_ERR "Alloc memory error for timer!\n"); ++ return -ENOMEM; ++ } ++ ++ init_timer(ts->timer); ++ ts->timer->function = touch_timer_handler; ++ ts->timer->data = 0; ++ p_zy_codec_ctxt->g_pfn_enable_touch(p_zy_codec_ctxt); ++ ++ return 0; ++} ++ ++/* ++ * initilze the pxa touch screen ++ */ ++static int alsa_ts_init( void ) ++{ ++ codec_zy_ts_t* ts = &codec_zy_ts; ++ ++ memset(ts, 0, sizeof(codec_zy_ts_t)); ++ ++ codec_zy_ts_input = input_allocate_device(); ++ if (!codec_zy_ts_input) ++ return -ENOMEM; ++ ++ ++ /* tell input system what we events we accept and register */ ++ codec_zy_ts_input->name = "codec zy touchscreen"; ++ codec_zy_ts_input->open = codec_zy_ts_input_open; ++ codec_zy_ts_input->close = codec_zy_ts_input_close; ++ __set_bit(EV_ABS, codec_zy_ts_input->evbit); ++ __set_bit(ABS_X, codec_zy_ts_input->absbit); ++ __set_bit(ABS_Y, codec_zy_ts_input->absbit); ++ __set_bit(ABS_PRESSURE, codec_zy_ts_input->absbit); ++ input_register_device(codec_zy_ts_input); ++ ++ return 0; ++} ++ ++static irqreturn_t pxa_touch_irq(int irq, void *dev) ++{ ++ unsigned char event_type; ++ ++ //printk(KERN_ERR "%s: enter codec event handler\n", __FUNCTION__); ++ ++ dbg("%s: enter codec event handler\n", __FUNCTION__); ++ p_zy_codec_ctxt->g_pfn_get_event(p_zy_codec_ctxt, &event_type); ++ switch (event_type) { ++ case ZY_EVENT_TYPE_PDN: ++ { ++ codec_zy_ts_t *ts = &codec_zy_ts; ++ /*if the touch is not open need not acknowledge the event*/ ++ if (ts->use_count <= 0) ++ break; ++ ts->timer->expires = jiffies + TS_SAMPLE_INTERVAL; ++ add_timer(ts->timer); ++ break; ++ } ++ default: ++ printk("unsupported codec event:0x%x\n", event_type); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++ ++ ++ ++ ++ ++ ++ ++ ++static mfp_cfg_t extra_cfg[] = { ++ MFP_CFG_X(GPIO17, AF3, DS03X, PULL_LOW), ++ MFP_CFG_X(GPIO25, AF0, DS01X, PULL_LOW), ++}; ++ ++#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) ++ ++extern void dump_mfp(void); ++ ++zy_acodec_error_t zy_ac97_acodec_mfp_init(zy_acocec_context_t *p_device_context) ++{ ++ unsigned short codec_id; ++ ++ //mhn_mfp_set_afds(MFP_RSVD_AC97_SDATA_IN_0, MFP_AF0, MFP_DS03X); ++ //enable_ac97_pins(); ++ zy_ac97_acodec_init(p_device_context); ++ if (zy_ac97_acodec_read(p_device_context, 0x0, &codec_id)){ ++ ++ /* ++ * there is a bug on MonahansL/MonhansPL PC card: AC97_SDATA_IN is not connected to CODEC ++ * ECO 72: Connect PWM_0(MFP_RSVD_AC97_SDATA_IN_0) to CODEC as AC97_SDATA_IN ++ */ ++ ++ //mhn_mfp_set_afds(MFP_RSVD_AC97_SDATA_IN_0, MFP_RSVD_AC97_SDATA_IN_0_AF, MFP_DS03X); ++ //mhn_mfp_set_afds(MFP_AC97_SDATA_IN_0, MFP_AF0, MFP_DS01X); ++ ++ gpio_direction_output(mfp_to_gpio(MFP_PIN_GPIO17), 0); ++ pxa3xx_mfp_config(ARRAY_AND_SIZE(extra_cfg)); ++ gpio_direction_input(mfp_to_gpio(MFP_PIN_GPIO25)); ++ } ++ ++ ++ return ZY_ACODEC_SUCCESS; ++} ++ ++#define ZY_AC97_WM9713_GPIO_PIN_PDN ( 0x1 << 13 ) /* Pen down */ ++ ++/*power enable bit in 3ch and 3eh */ ++/*3ch */ ++#define ZY_AC97_9713_PWR_PADCPD ( 0x1 << 15 ) ++#define ZY_AC97_9713_PWR_VMID ( 0x1 << 14 ) ++#define ZY_AC97_9713_PWR_TSHUT ( 0x1 << 13 ) ++#define ZY_AC97_9713_PWR_VXDAC ( 0x1 << 12 ) ++#define ZY_AC97_9713_PWR_AUXDAC ( 0x1 << 11 ) ++#define ZY_AC97_9713_PWR_MBIAS ( 0x1 << 10 ) ++#define ZY_AC97_9713_PWR_PLL ( 0x1 << 9 ) ++#define ZY_AC97_9713_PWR_DACL ( 0x1 << 7 ) ++#define ZY_AC97_9713_PWR_DACR ( 0x1 << 6 ) ++#define ZY_AC97_9713_PWR_ADCL ( 0x1 << 5 ) ++#define ZY_AC97_9713_PWR_ADCR ( 0x1 << 4 ) ++#define ZY_AC97_9713_PWR_HPLX ( 0x1 << 3 ) ++#define ZY_AC97_9713_PWR_HPRX ( 0x1 << 2 ) ++#define ZY_AC97_9713_PWR_SPKX ( 0x1 << 1 ) ++#define ZY_AC97_9713_PWR_MX ( 0x1 << 0 ) ++ ++/*3EH */ ++#define ZY_AC97_9713_PWR_MCD ( 0x1 << 15 ) ++#define ZY_AC97_9713_PWR_MICBIAS ( 0x1 << 14 ) ++#define ZY_AC97_9713_PWR_MONO ( 0x1 << 13 ) ++#define ZY_AC97_9713_PWR_OUT4 ( 0x1 << 12 ) ++#define ZY_AC97_9713_PWR_OUT3 ( 0x1 << 11 ) ++#define ZY_AC97_9713_PWR_HPL ( 0x1 << 10 ) ++#define ZY_AC97_9713_PWR_HPR ( 0x1 << 9 ) ++#define ZY_AC97_9713_PWR_SPKL ( 0x1 << 8 ) ++#define ZY_AC97_9713_PWR_SPKR ( 0x1 << 7 ) ++#define ZY_AC97_9713_PWR_LL ( 0x1 << 6 ) ++#define ZY_AC97_9713_PWR_LR ( 0x1 << 5 ) ++#define ZY_AC97_9713_PWR_MOIN ( 0x1 << 4 ) ++#define ZY_AC97_9713_PWR_MA ( 0x1 << 3 ) ++#define ZY_AC97_9713_PWR_MB ( 0x1 << 2 ) ++#define ZY_AC97_9713_PWR_MPA ( 0x1 << 1 ) ++#define ZY_AC97_9713_PWR_MPB ( 0x1 << 0 ) ++ ++ ++void zy_wm9713_get_event(zy_acocec_context_t *p_device_context, unsigned char * event_type) ++{ ++ unsigned short event_state = 0; ++ zy_ac97_acodec_read(p_device_context, GPIO_PIN_STATUS, &event_state); ++ if(event_state & ZY_AC97_WM9713_GPIO_PIN_PDN){ ++ *event_type = ZY_EVENT_TYPE_PDN; ++ return; ++ } ++ return; ++} ++ ++void zy_wm9713_event_ack(zy_acocec_context_t *p_device_context, unsigned char event_type) ++{ ++ unsigned short event_state = 0; ++ zy_ac97_acodec_read(p_device_context, GPIO_PIN_STATUS, &event_state); ++ if( event_type == ZY_EVENT_TYPE_PDN){ ++ zy_ac97_acodec_write(p_device_context, ++ GPIO_PIN_STATUS, ++ (event_state & (~ZY_AC97_WM9713_GPIO_PIN_PDN))); ++ } ++ ++ zy_ac97_acodec_read(p_device_context, GPIO_PIN_STATUS, &event_state); ++ return; ++} ++ ++static void * p_saved_memory = NULL; ++static void * p_zy_scenario = NULL; ++static p_zy_acocec_context_t p_zy_ctxt = NULL; ++ ++#define WM9713_SAVE_REGISTER_NO (64-11) ++typedef struct { ++ unsigned short wm9713RegisterContext [WM9713_SAVE_REGISTER_NO + 1]; /* Fixed (data misalignment error) */ ++}ZY_9713_CONTEXT_SAVE_T; ++ ++ ++/** ++ * alsa_prepare_for_zy - create and initialize the p_zy_acocec_context_t ++ * open the clock of data link ++ * @p_p_zy_ctxt: return the data structure p_zy_acocec_context_t ++ * return: 0 success ; -ENOMEM ++ **/ ++int alsa_prepare_for_zy(p_zy_acocec_context_t * p_p_zy_ctxt) ++{ ++ if (p_zy_ctxt) { ++ p_zy_ctxt->use_count++; ++ *p_p_zy_ctxt = p_zy_ctxt; ++ return 0; ++ } ++ ++ p_zy_ctxt = kzalloc(sizeof(zy_acocec_context_t), GFP_KERNEL); ++ if (!p_zy_ctxt) ++ return -ENOMEM; ++ ++ /* enable CLK_POUT as CODEC clock input */ ++ OSCC |= 0x800; ++ ++ p_saved_memory = kzalloc(sizeof(ZY_9713_CONTEXT_SAVE_T) + ++ sizeof(zy_ac97_save_context_t), GFP_KERNEL); ++ if (NULL == p_saved_memory) { ++ if (p_zy_ctxt) ++ kfree(p_zy_ctxt); ++ return -ENOMEM; ++ } ++ ++ p_zy_ctxt->acodec_id = (zy_acodec_device_id_t) (WM_9713_ID); ++ p_zy_ctxt->use_count++; ++ /* ++ p_zy_ctxt->pMfpRegBase = (unsigned long) (MFP_BASE); ++ p_zy_ctxt->pMfpRmDb = ZY_MFP_RM_DATABASE; ++ p_zy_ctxt->p_ost_regs = OST_BASE; ++ */ ++ p_zy_ctxt->p_voice_reg = NULL; ++ p_zy_ctxt->p_hifi_reg = (void *) (&POCR); ++ p_zy_ctxt->p_ctrl_reg = (void *) (&POCR); ++ p_zy_ctxt->u_max_read_write_time_out_ms = ZY_AC97_RW_TIMEOUT_DEF; ++ p_zy_ctxt->u_max_setup_time_out_ms = ZY_AC97_SETUP_TIMEOUT_DEF; ++ p_zy_ctxt->p_save_memory = p_saved_memory; ++ p_zy_ctxt->p_zy_scenario = p_zy_scenario; ++// pxa_set_cken(24, 1); ++ CKENA |= (1 << 24); ++ AC97_DIV = 1625<<12 | 128; ++#ifdef DEBUG_ALSA_ZY ++ debug_pac97ctxt = p_zy_ctxt; ++ misc_register(&audio_dev); ++#endif ++ ++ (*p_p_zy_ctxt) = p_zy_ctxt; ++ ++ return 0; ++} ++ ++ ++/* this is platform specific */ ++/* do later: not to enable recording route and playback route in this function, ++ * leave it to driver to call other function ++ */ ++zy_acodec_error_t zy_wm9713_specific_init (zy_acocec_context_t *p_device_context) ++{ ++ ++ unsigned short value; ++ ++ /* this assumes that the aclink is initialized wait some time and then ++ * do a warm reset to enabled the ACLINK, required for wm9713 ++ * (not wm9712 or ucb1400) ++ */ ++ ++ /* pay attention: whether the workaround is still needed? */ ++ p_zy_ac97acodec_t p_ac97_reg = (p_zy_ac97acodec_t)(p_device_context->p_ctrl_reg); ++ ++ p_ac97_reg->gcr |= ZY_AC97_GCR_WARM_RESET_MSK; ++ ++ mdelay(5); ++ ++ /* power on all the necessary unit */ ++ zy_ac97_acodec_write(p_device_context,POWERDOWN_CTRL_STAT, 0x000); /*26*/ ++ /* open left headphone mixer */ ++ /* open right headphone mixer */ ++ /* open right/left dac */ ++ /* open right/left adc */ ++ /* open temperature sensor */ ++ /* enable reference generator */ ++ zy_ac97_acodec_write(p_device_context,POWER_DOWN_1, 0xda00); /*3c */ ++ /* open microphone bias */ ++ /* open HPL output PGA */ ++ /* open HPR output PGA */ ++ /* open mic PGA MA */ ++ /* open mic pre-amp MPA */ ++ /* if here we enable SPKL and SPKR PGA, then Touch screen will doesn't work */ ++ zy_ac97_acodec_write(p_device_context,POWER_DOWN_2,0xb9f5); /*3e */ ++ ++ /* recording route and microphone input */ ++ /* microphone selection, now fixed to MIC1 input and mic bias output */ ++ /* MIC1 only, MICBIAS enable */ ++ zy_ac97_acodec_write (p_device_context, MIC_BIAS, 0xC440); /*0x22h*/ ++ ++ /* mic pga setting to mixer (side tone) */ ++ /* comment the below code to make MICA/B play back volume gain + 0db */ ++ /* zy_ac97_acodec_write (p_device_context, MIC_PGA_VOLUME, 0x0000); */ /*0x0eh*/ ++ ++ /* recording side tone and ADC boost, now fixed to default (14h) */ ++ /* recording volume 0dB */ ++ zy_ac97_acodec_write(p_device_context, REC_PGA_VOL, 0x0); /*12*/ ++ ++ /* hifi playback route and output mixer */ ++ /* by default, fixed to enable headphone only */ ++ ++ /* comment the below code to make SPEAKER default MUTE */ ++ zy_ac97_acodec_write (p_device_context, SPEAKER_VOLUME, 0x0); /*02*/ ++ ++ /* comment the below code to make OUT3_OUT4 default MUTE */ ++ /* zy_ac97_acodec_write (p_device_context, OUT3_OUT4_VOLUME, 0x8000); */ /*06*/ ++ ++ /* remove all the mute bit volume gain + 0db */ ++ zy_ac97_acodec_write(p_device_context, HEADPHONE_VOLUME, 0x0); /*04*/ ++ ++ /* DAC route */ ++ /* open DAC to headphone mixer path */ ++ /* left DAC gain +0db */ ++ /* right DAC gain +0db */ ++ zy_ac97_acodec_write(p_device_context, DAC_PGA_VOL_ROUTE,0x0808); /*0c*/ ++ ++ /* out3 configure, invert to HPMIXR */ ++ /* zy_ac97_acodec_write(p_device_context,DAC_3D_CTRL_INV_MUX_SEL, 0x8000); */ /*1e*/ ++ ++ /* output control */ ++ /* select HPMIXR HPMIXL out */ ++ /* other out are all VIM */ ++ zy_ac97_acodec_write(p_device_context,OUTPUT_PGA_MUX, 0x9BA8); /*1c*/ ++ ++ /* set sample rates */ ++ /* enable variable rate conversion */ ++ zy_ac97_acodec_write(p_device_context, EXTENDED_AUD_STAT_CTRL , 0x1); /*2a*/ ++ /* DAC 44kHZ */ ++ zy_ac97_acodec_write(p_device_context,AUDIO_DAC_RATE,0xac44); /*2c*/ ++ /* ADC 16KHZ */ ++ zy_ac97_acodec_write(p_device_context,AUDIO_ADC_RATE,0x3E80); /*32*/ ++ ++ /* clock scheme, use external clock, it is 24MHZ from MCLK_A */ ++ ++ ++ zy_ac97_acodec_read(p_device_context, MCLK_PLL_CTRL_1, &value); ++ zy_ac97_acodec_write(p_device_context, MCLK_PLL_CTRL_1, value | 0x2); ++ ++ return ZY_ACODEC_SUCCESS; ++} ++ ++zy_acodec_error_t zy_wm9713_specific_deinit (zy_acocec_context_t *p_device_context) ++{/* do later: shut down all power */ ++ unsigned short value = 0; ++ ++ /* close the power of all units */ ++ zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, 0xffff); ++ zy_ac97_acodec_write(p_device_context, POWER_DOWN_2, 0xffff); ++ zy_ac97_acodec_read(p_device_context, POWER_DOWN_1, &value); ++ value &= ~(ZY_AC97_9713_PWR_MBIAS); ++ zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, value); ++ ++ return ZY_ACODEC_SUCCESS; ++} ++ ++zy_acodec_error_t zy_acodec_set_pen_down_interrupt(zy_acocec_context_t *p_device_context, int enable) ++{/* disable/enable pen down interrupt in the codec. This function is not implemented for Wm9713 */ ++ /* because the pen down detection could not be disabled in codec */ ++ return ZY_ACODEC_SUCCESS; ++} ++ ++zy_acodec_error_t zy_wm9713_enable_touch(zy_acocec_context_t *p_device_context) ++{/* enable touch functionality in the codec */ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ unsigned short value; ++ ++ /* power setting */ ++ status = zy_ac97_acodec_read(p_device_context, POWER_DOWN_1, &value); ++ value &= ~(ZY_AC97_9713_PWR_PADCPD); ++ status = zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, value); ++ ++ /* basic touch setting */ ++ status = zy_ac97_acodec_write(p_device_context, DIGITIZER_3_WM13, 0xc008); ++ status = zy_ac97_acodec_write(p_device_context, DIGITIZER_2_WM13, 0x6); ++ ++ ++ /* 9713 powerdown virtual gpio setting (polarity, sticky, wakeup) */ ++ /* 9713 gpio 2(pin45) route to IRQ */ ++ /* Notes: Can use defaults for IRQ polarity, PENDOWN polarity in IRQ, */ ++ /* sticky for PENDOWN in IRQ and wakeup for PENDOWN. */ ++ status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_CFG, &value); ++ value &= ~(0x4); ++ status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_CFG, value); ++ ++ status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_SHARING, &value); ++ value &= ~(0x4); ++ status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_SHARING, value); ++ ++ status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_WAKEUP, &value); ++ value |= (0x2000); ++ status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_WAKEUP, value); ++ ++ status = zy_ac97_acodec_read(p_device_context, GPIO_PIN_STICKY, &value); ++ value |= (0x2000); ++ status = zy_ac97_acodec_write(p_device_context, GPIO_PIN_STICKY, value); ++ ++ return status; ++} ++ ++zy_acodec_error_t zy_wm9713_disable_touch(zy_acocec_context_t *p_device_context) ++{/* disable touch functionality in the codec */ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ unsigned short value; ++ ++ /* power setting */ ++ status = zy_ac97_acodec_read(p_device_context, POWER_DOWN_1, &value); ++ value |= (ZY_AC97_9713_PWR_PADCPD); ++ status = zy_ac97_acodec_write(p_device_context, POWER_DOWN_1, value); ++ ++ return status; ++} ++zy_acodec_error_t zy_ac97_acodec_mfp_deinit(zy_acocec_context_t *p_device_context) ++{/* do later: free all MFP resources. */ ++ return ZY_ACODEC_SUCCESS; ++} ++ ++static zy_acodec_error_t zy_ac97_acodec_shut_down_aclink(p_zy_ac97acodec_t p_ac97_reg, int * p_ost_regs) ++{ ++ zy_acodec_error_t status = ZY_ACODEC_SUCCESS; ++ unsigned long time_remaining = ZY_AC97_LINKOFF_TIMEOUT_DEF; ++ ++ p_ac97_reg->gcr |= ZY_AC97_GCR_LINK_OFF_MSK; ++ p_ac97_reg->gcr |= ZY_AC97_GCR_CLKBPB_MSK; ++ ++ while (!(p_ac97_reg->gsr & ZY_AC97_GSR_ACOFFD_MSK)) ++ { ++ time_remaining --; ++ if (0 == time_remaining) ++ { ++ status = ZY_ACODEC_CONTROLLER_INTERFACE_TIMEOUT; ++ break; ++ } ++ udelay(1); ++ } ++ p_ac97_reg->gcr |= ZY_AC97_GCR_FRCRST_MSK; ++ /* check later: any delay needed */ ++ p_ac97_reg->gcr &= ~ZY_AC97_GCR_FRCRST_MSK; ++ p_ac97_reg->gcr &= ~ZY_AC97_GCR_CLKBPB_MSK; ++ ++ return(status); ++} ++ ++ ++zy_acodec_error_t zy_ac97_acodec_deinit(zy_acocec_context_t * p_ac97_ctxt) ++{ ++ zy_acodec_error_t status ; ++ ++ status = zy_ac97_acodec_shut_down_aclink((p_zy_ac97acodec_t)(p_ac97_ctxt->p_ctrl_reg), p_ac97_ctxt->p_ost_regs); ++ ++ return (status); ++} ++ ++zy_acodec_error_t zy_acodec_deinit(zy_acocec_context_t *p_device_context) ++{ ++ /* power down codec by codec specific power down function */ ++ if (p_device_context->g_pfn_codec_specific_dinit) ++ { ++ p_device_context->g_pfn_codec_specific_dinit(p_device_context); ++ } ++ /* call bus deinit function */ ++ zy_ac97_acodec_deinit(p_device_context); ++ /* restore MFP, set GPIO to suitable value */ ++ zy_ac97_acodec_mfp_deinit(p_device_context); ++ ++ return ZY_ACODEC_SUCCESS; ++} ++ ++void alsa_zy_codec_put(p_zy_acocec_context_t p_acodectxt) ++{ ++ ++ zy_acodec_deinit(p_acodectxt); ++ //pxa_set_cken(24, 0); ++ CKENA &= ~(1 << 24); ++ ++ if(p_acodectxt->p_save_memory){ ++ kfree(p_saved_memory); ++ } ++ if(p_acodectxt->p_zy_scenario){ ++ kfree(p_zy_scenario); ++ } ++} ++ ++ ++zy_acodec_error_t zy_acodec_init(zy_acocec_context_t *p_device_context, int hw_init) ++{ ++ /* set codec specific functions ++ * set mfp for Zylonite platform ++ * call bus init function (AC97, I2S, I2C, SSP) ++ * call specific init of codec ++ */ ++ zy_acodec_error_t retval = ZY_ACODEC_SUCCESS; ++ ++ if (p_device_context->acodec_id != WM_9713_ID) ++ {/* on Zylonite, it is Wolfson 9713 codec only */ ++ return ZY_ACODEC_GENERAL_SW_ERR; ++ } ++ ++ if (1 == hw_init) ++ { ++ zy_ac97_acodec_mfp_init(p_device_context); ++ zy_ac97_acodec_init(p_device_context); /* codec init common to ac97 */ ++ } ++ ++ /* wm9713-specific functions */ ++ (p_device_context->g_pfn_codec_specific_init) = zy_wm9713_specific_init; ++ (p_device_context->g_pfn_codec_specific_dinit) = zy_wm9713_specific_deinit; ++ (p_device_context->g_pfn_acodec_read) = zy_ac97_acodec_read; ++ (p_device_context->g_pfn_acodec_write) = zy_ac97_acodec_write; ++ ++ (p_device_context->g_pfn_event_ack) = zy_wm9713_event_ack; ++ (p_device_context->g_pfn_get_event) = zy_wm9713_get_event; ++ (p_device_context->g_pfn_disable_touch) = zy_wm9713_disable_touch; ++ (p_device_context->g_pfn_enable_touch) = zy_wm9713_enable_touch; ++ ++ if (1 == hw_init) ++ { ++ retval = p_device_context->g_pfn_codec_specific_init(p_device_context); ++ } ++ ++ return retval; ++} ++ ++static int __devinit touch_codec_zy_probe(struct platform_device *dev) ++{ ++ int ret = 0; ++ struct snd_card *card = NULL; ++ zy_acodec_error_t status; ++ ++ /* will increase codec context use count */ ++ ret = alsa_prepare_for_zy(&p_zy_codec_ctxt); ++ if (ret) ++ goto err; ++ ++ /* codec specific initialization, audio will do it either */ ++ if (1 == p_zy_codec_ctxt->use_count) { ++ status = zy_acodec_init(p_zy_codec_ctxt, 1); ++ if (ZY_ACODEC_SUCCESS != status) { ++ printk(KERN_ERR "initialize codec error\n"); ++ ret = -EIO; ++ goto err; ++ } ++ ++ /* power down the units of the acodec, sleep the acodec, zy_acodec_init() ++ * will open all the units' power of the codec while ALSA need all the codec ++ * units power down and the codec should sleep if it can. ++ * So on the zylonite platform we call below function to power down and sleep ++ * wm9713 codec. ++ */ ++ p_zy_codec_ctxt->g_pfn_codec_specific_dinit(p_zy_codec_ctxt); ++ ++ } ++ ++ alsa_ts_init(); ++ ++ //mhn_mfp_set_afds(MFP_AC97_INT_N_GPIO,0,0); ++ //mhn_gpio_set_direction(MFP_AC97_INT_N_GPIO, GPIO_DIR_IN); ++ //mhn_gpio_clear_edge_detect_status(MFP_AC97_INT_N_GPIO); ++ gpio_direction_input(mfp_to_gpio(MFP_PIN_GPIO26)); ++ ret = request_irq(IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO26)), ++ pxa_touch_irq, IRQF_TRIGGER_RISING, ++ "wm9713 touch event interrupt", NULL); ++ if (ret) { ++ printk(KERN_ERR "Request IRQ for touch failed (%d).\n", ret); ++ goto err; ++ } ++ ++ return 0; ++err: ++ if (p_zy_codec_ctxt && (!--p_zy_codec_ctxt->use_count)) { ++ zy_acodec_deinit(p_zy_codec_ctxt); ++ //pxa_set_cken(24, 0); ++ CKENA &= ~(1 << 24); ++ kfree(p_zy_codec_ctxt); ++ p_zy_codec_ctxt = NULL; ++ } ++ ++ if (card) ++ snd_card_free(card); ++ ++ return ret; ++} ++ ++static int __devexit touch_codec_zy_remove(struct platform_device *dev) ++{ ++ struct snd_card *card = platform_get_drvdata(dev); ++ ++ input_unregister_device(codec_zy_ts_input); ++ ++ if (p_zy_codec_ctxt && (!--p_zy_codec_ctxt->use_count)) { ++ alsa_zy_codec_put(p_zy_codec_ctxt); ++ kfree(p_zy_codec_ctxt); ++ p_zy_codec_ctxt = NULL; ++ } ++ ++ if (card) { ++ snd_card_free(card); ++ platform_set_drvdata(dev, NULL); ++ } ++ ++ return 0; ++} ++ ++#ifdef CONFIG_PM ++static int touch_codec_zy_suspend(struct platform_device *_dev, pm_message_t state, u32 level) ++{ ++ int ret=0; ++ ++ if (level == SUSPEND_DISABLE) { ++ ret = audio_codec_zy_do_suspend(NULL, SNDRV_CTL_POWER_D3cold, p_zy_codec_ctxt); ++ touch_suspend = 1; ++ } ++ return ret; ++} ++ ++static int touch_codec_zy_resume(struct platform_device *_dev, u32 level) ++{ ++ int ret = 0; ++ ++ if (level == RESUME_ENABLE) { ++ ret = audio_codec_zy_do_resume(NULL, SNDRV_CTL_POWER_D0, p_zy_codec_ctxt); ++ touch_suspend = 0; ++ } ++ return ret; ++} ++#else ++#define touch_codec_zy_suspend NULL ++#define touch_codec_zy_resume NULL ++#endif ++ ++static struct platform_driver touch_codec_zy_driver = { ++ .probe = touch_codec_zy_probe, ++ .remove = __devexit_p(touch_codec_zy_remove), ++ .suspend= touch_codec_zy_suspend, ++ .resume = touch_codec_zy_resume, ++ .driver = { ++ .name = "pxa2xx-touch", ++ }, ++}; ++ ++static int __init touch_codec_zy_init(void) ++{ ++ return platform_driver_register(&touch_codec_zy_driver); ++} ++ ++static void __exit touch_code_zy_exit(void) ++{ ++ platform_driver_unregister(&touch_codec_zy_driver); ++} ++module_init(touch_codec_zy_init); ++module_exit(touch_code_zy_exit); ++ ++EXPORT_SYMBOL(p_zy_codec_ctxt); ++ ++MODULE_AUTHOR("bridge.wu@marvell.com"); ++MODULE_DESCRIPTION("zylonite audio touch codec driver on ALSA"); ++MODULE_LICENSE("GPL"); ++ diff --git a/packages/linux/linux-rp.inc b/packages/linux/linux-rp.inc index 9488105f0b..2309235139 100644 --- a/packages/linux/linux-rp.inc +++ b/packages/linux/linux-rp.inc @@ -15,13 +15,14 @@ CHSRC = "http://oz.drigon.com/patches" TKSRC = "http://www.informatik.hu-berlin.de/~tkunze/zaurus/patches" COMPATIBLE_HOST = "(arm|i.86).*-linux" -COMPATIBLE_MACHINE = '(collie|poodle|c7x0|akita|spitz|tosa|hx2000|qemuarm|qemux86|bootcdx86|htcuniversal)' +COMPATIBLE_MACHINE = '(collie|poodle|c7x0|akita|spitz|tosa|hx2000|qemuarm|qemux86|bootcdx86|htcuniversal|zylonite)' KERNEL_DEFCONFIG ?= "defconfig-${MACHINE}" CMDLINE_CON = "console=ttyS0,115200n8 console=tty1 noinitrd" CMDLINE_CON_collie = "console=ttySA0,115200n8 console=tty1 noinitrd" CMDLINE_CON_qemuarm = "console=ttyAMA0,115200n8 console=tty1 noinitrd" +CMDLINE_CON_zylonite = "console=ttyS0,38400" CMDLINE_ROOT ?= "root=/dev/mtdblock2 rootfstype=jffs2" CMDLINE_ROOT_spitz ?= "root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw" #CMDLINE_ROOT_spitz = "root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 rw" @@ -35,6 +36,7 @@ export mem = '${@bb.data.getVar("COLLIE_MEMORY_SIZE",d,1) or "64"}' export rd = '${@bb.data.getVar("COLLIE_RAMDISK_SIZE",d,1) or "0"}' CMDLINE_MEM_collie = "mem=${mem}M" +CMDLINE_MEM_zylonite = "mem=64M" CMDLINE_ROTATE_spitz = "fbcon=rotate:1" CMDLINE_ROTATE_akita = "fbcon=rotate:1" CMDLINE_ROTATE_collie = "fbcon=rotate:1" @@ -53,7 +55,6 @@ module_autoload_snd-soc-corgi_c7x0 = "snd-soc-corgi" module_autoload_snd-soc-spitz_akita = "snd-soc-spitz" module_autoload_snd-soc-spitz_spitz = "snd-soc-spitz" module_autoload_snd-soc-poodle_poodle = "snd-soc-poodle" - module_autoload_locomo-spi_collie = "locomo-spi" module_autoload_mmc_block_collie = "mmc_block" module_autoload_mmc_spi = "mmc-spi" diff --git a/packages/linux/linux-rp_2.6.23.bb b/packages/linux/linux-rp_2.6.23.bb index f4967e16ae..4bb06b60b1 100644 --- a/packages/linux/linux-rp_2.6.23.bb +++ b/packages/linux/linux-rp_2.6.23.bb @@ -1,6 +1,6 @@ require linux-rp.inc -PR = "r27" +PR = "r34" # Handy URLs # git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git;protocol=git;tag=ef7d1b244fa6c94fb76d5f787b8629df64ea4046 @@ -43,6 +43,8 @@ SRC_URI = "${KERNELORG_MIRROR}pub/linux/kernel/v2.6/linux-2.6.23.tar.bz2 \ ${RPSRC}/poodle_pm-r4.patch;patch=1 \ ${RPSRC}/poodle_lcd_hack-r0.patch;patch=1 \ ${RPSRC}/poodle_asoc_fix-r1.patch;patch=1 \ + file://wm8750-treble.patch;patch=1 \ + file://mtd-module.patch;patch=1 \ file://squashfs3.0-2.6.15.patch;patch=1;status=external \ ${RPSRC}/logo_oh-r1.patch.bz2;patch=1;status=unmergable \ ${RPSRC}/pxa-linking-bug.patch;patch=1;status=unmergable \ @@ -132,14 +134,10 @@ SRC_URI_append_tosa = "\ SRC_URI_append_akita = "\ file://sharpsl-rc-r1.patch;patch=1;status=external \ - file://wm8750-treble.patch;patch=1;status=external \ - file://mtd-module.patch;patch=1 \ " SRC_URI_append_spitz = "\ file://sharpsl-rc-r1.patch;patch=1;status=external \ - file://wm8750-treble.patch;patch=1;status=external \ - file://mtd-module.patch;patch=1 \ " SRC_URI_append_htcuniversal ="\ @@ -150,6 +148,9 @@ SRC_URI_append_zylonite ="\ file://arm_pxa_20070923.patch;patch=1 \ file://pxa_fb_overlay.patch;patch=1 \ file://zylonite-boot.patch;patch=1 \ + file://zylonite_mtd-r0.patch;patch=1 \ + file://zylonite_touch-r0.patch;patch=1 \ + file://zylonite_keypad-r0.patch;patch=1 \ " S = "${WORKDIR}/linux-2.6.23" |