summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--packages/linux/linux-2.6.26/boc01/005-081127-isl12024.patch (renamed from packages/linux/linux-2.6.26/boc01/005-081105-isl12024.patch)58
-rw-r--r--packages/linux/linux-2.6.26/boc01/007-081105-lm73.patch317
-rw-r--r--packages/linux/linux-2.6.26/boc01/007-081127-lm73.patch275
-rw-r--r--packages/linux/linux-2.6.26/boc01/008-081105-spi.patch100
-rw-r--r--packages/linux/linux-2.6.26/boc01/008-081127-spi.patch327
-rw-r--r--packages/linux/linux-2.6.26/boc01/013-081127-lcd.patch663
-rw-r--r--packages/linux/linux-2.6.26/boc01/boc01.dts3
-rw-r--r--packages/linux/linux-2.6.26/boc01/defconfig76
-rw-r--r--packages/linux/linux_2.6.26.bb9
9 files changed, 1317 insertions, 511 deletions
diff --git a/packages/linux/linux-2.6.26/boc01/005-081105-isl12024.patch b/packages/linux/linux-2.6.26/boc01/005-081127-isl12024.patch
index 538a29ce7e..5e9f198b47 100644
--- a/packages/linux/linux-2.6.26/boc01/005-081105-isl12024.patch
+++ b/packages/linux/linux-2.6.26/boc01/005-081127-isl12024.patch
@@ -327,10 +327,10 @@ diff -Nru linux-2.6.26-officiel/drivers/rtc/Makefile /home/guilig/workspace/kern
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
-diff -Nru linux-2.6.26-officiel/drivers/rtc/rtc-isl12024.c /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/rtc/rtc-isl12024.c
---- linux-2.6.26-officiel/drivers/rtc/rtc-isl12024.c 1970-01-01 01:00:00.000000000 +0100
-+++ /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/rtc/rtc-isl12024.c 2008-10-21 10:41:51.000000000 +0200
-@@ -0,0 +1,564 @@
+diff -Nru linux-2.6.26/drivers/rtc/rtc-isl12024.c linux-2.6.26.mod/drivers/rtc/rtc-isl12024.c
+--- linux-2.6.26/drivers/rtc/rtc-isl12024.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26.mod/drivers/rtc/rtc-isl12024.c 2008-11-27 12:05:37.000000000 +0100
+@@ -0,0 +1,516 @@
+/*
+ * Intersil ISL12024 class driver
+ *
@@ -550,54 +550,6 @@ diff -Nru linux-2.6.26-officiel/drivers/rtc/rtc-isl12024.c /home/guilig/workspac
+ return 0;
+}
+
-+//static int isl12024_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-+// unsigned char reg_base)
-+//{
-+// unsigned char dt_addr[2] = { 0, reg_base };
-+// unsigned char buf[8];
-+// int i;
-+//
-+// struct i2c_msg msgs[] = {
-+// { client->addr, 0, 2, dt_addr }, /* setup read ptr */
-+// { client->addr, I2C_M_RD, 8, buf }, /* read date */
-+// };
-+//
-+// /* read date registers */
-+// if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
-+// dev_err(&client->dev, "%s: read error\n", __func__);
-+// return -EIO;
-+// }
-+//
-+// dev_dbg(&client->dev,
-+// "%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
-+// "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
-+// __func__,
-+// buf[0], buf[1], buf[2], buf[3],
-+// buf[4], buf[5], buf[6], buf[7]);
-+//
-+// /* Mask out the enable bits if these are alarm registers */
-+// if (reg_base < ISL12024_CCR_BASE)
-+// for (i = 0; i <= 4; i++)
-+// buf[i] &= 0x7F;
-+//
-+// tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
-+// tm->tm_min = BCD2BIN(buf[CCR_MIN]);
-+// tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
-+// tm->tm_mday = BCD2BIN(buf[CCR_MDAY]);
-+// tm->tm_mon = BCD2BIN(buf[CCR_MONTH]) - 1; /* mon is 0-11 */
-+// tm->tm_year = BCD2BIN(buf[CCR_YEAR])
-+// + (BCD2BIN(buf[CCR_Y2K]) * 100) - 1900;
-+// tm->tm_wday = buf[CCR_WDAY];
-+//
-+// dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
-+// "mday=%d, mon=%d, year=%d, wday=%d\n",
-+// __func__,
-+// tm->tm_sec, tm->tm_min, tm->tm_hour,
-+// tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+//
-+// return 0;
-+//}
-+
+static int isl12024_set_datetime(struct i2c_client *client, struct rtc_time *tm,
+ int datetoo, u8 reg_base, unsigned char alm_enable)
+{
@@ -634,7 +586,7 @@ diff -Nru linux-2.6.26-officiel/drivers/rtc/rtc-isl12024.c /home/guilig/workspac
+ buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
+
+ /* month, 1 - 12 */
-+ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon + 1);
++ buf[CCR_MONTH] = BIN2BCD(tm->tm_mon);
+
+ /* year, since the rtc epoch*/
+ buf[CCR_YEAR] = BIN2BCD(tm->tm_year % 100);
diff --git a/packages/linux/linux-2.6.26/boc01/007-081105-lm73.patch b/packages/linux/linux-2.6.26/boc01/007-081105-lm73.patch
deleted file mode 100644
index 4f51d5d222..0000000000
--- a/packages/linux/linux-2.6.26/boc01/007-081105-lm73.patch
+++ /dev/null
@@ -1,317 +0,0 @@
-diff -Nru linux-2.6.26-officiel/drivers/hwmon/Kconfig /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/hwmon/Kconfig
---- linux-2.6.26-officiel/drivers/hwmon/Kconfig 2008-07-13 23:51:29.000000000 +0200
-+++ /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/hwmon/Kconfig 2008-11-06 11:25:51.000000000 +0100
-@@ -390,6 +390,15 @@
- This driver can also be built as a module. If so, the module
- will be called lm70.
-
-+config SENSORS_LM73
-+ tristate "National Semiconductor LM73"
-+ depends on I2C
-+ help
-+ If you say yes here you get support for National Semiconductor LM73
-+ sensor chips
-+ This driver can also be built as a module. If so, the module
-+ will be called lm73.
-+
- config SENSORS_LM75
- tristate "National Semiconductor LM75 and compatibles"
- depends on I2C
-diff -Nru linux-2.6.26-officiel/drivers/hwmon/lm73.c /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/hwmon/lm73.c
---- linux-2.6.26-officiel/drivers/hwmon/lm73.c 1970-01-01 01:00:00.000000000 +0100
-+++ /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/hwmon/lm73.c 2008-11-04 14:57:12.000000000 +0100
-@@ -0,0 +1,283 @@
-+/*
-+ lm75.c - Part of lm_sensors, Linux kernel modules for hardware
-+ monitoring
-+ Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-+
-+ This program is free software; you can redistribute it and/or modify
-+ it under the terms of the GNU General Public License as published by
-+ the Free Software Foundation; either version 2 of the License, or
-+ (at your option) any later version.
-+
-+ This program is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ GNU General Public License for more details.
-+
-+ You should have received a copy of the GNU General Public License
-+ along with this program; if not, write to the Free Software
-+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+*/
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/jiffies.h>
-+#include <linux/i2c.h>
-+#include <linux/hwmon.h>
-+#include <linux/hwmon-sysfs.h>
-+#include <linux/err.h>
-+#include <linux/mutex.h>
-+#include "lm75.h"
-+
-+
-+/* Addresses to scan */
-+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
-+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-+
-+/* Insmod parameters */
-+I2C_CLIENT_INSMOD_1(lm75);
-+
-+/* Many LM75 constants specified below */
-+
-+/* The LM75 registers */
-+#define LM75_REG_CONF 0x01
-+static const u8 LM75_REG_TEMP[3] = {
-+ 0x00, /* input */
-+ 0x02, /* max */
-+ 0x02, /* hyst */
-+};
-+
-+/* Each client has this additional data */
-+struct lm75_data {
-+ struct i2c_client client;
-+ struct device *hwmon_dev;
-+ struct mutex update_lock;
-+ char valid; /* !=0 if following fields are valid */
-+ unsigned long last_updated; /* In jiffies */
-+ u16 temp[3]; /* Register values,
-+ 0 = input
-+ 1 = max
-+ 2 = hyst */
-+};
-+
-+static int lm75_attach_adapter(struct i2c_adapter *adapter);
-+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
-+static void lm75_init_client(struct i2c_client *client);
-+static int lm75_detach_client(struct i2c_client *client);
-+static int lm75_read_value(struct i2c_client *client, u8 reg);
-+static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
-+static struct lm75_data *lm75_update_device(struct device *dev);
-+
-+
-+/* This is the driver that will be inserted */
-+static struct i2c_driver lm75_driver = {
-+ .driver = {
-+ .name = "lm75",
-+ },
-+ .attach_adapter = lm75_attach_adapter,
-+ .detach_client = lm75_detach_client,
-+};
-+
-+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
-+ char *buf)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ struct lm75_data *data = lm75_update_device(dev);
-+ return sprintf(buf, "%d\n",
-+ LM75_TEMP_FROM_REG(data->temp[attr->index]));
-+}
-+
-+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
-+ struct i2c_client *client = to_i2c_client(dev);
-+ struct lm75_data *data = i2c_get_clientdata(client);
-+ int nr = attr->index;
-+ long temp = simple_strtol(buf, NULL, 10);
-+
-+ mutex_lock(&data->update_lock);
-+ data->temp[nr] = LM75_TEMP_TO_REG(temp);
-+ lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]);
-+ mutex_unlock(&data->update_lock);
-+ return count;
-+}
-+
-+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
-+ show_temp, set_temp, 1);
-+static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
-+ show_temp, set_temp, 2);
-+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
-+
-+static int lm75_attach_adapter(struct i2c_adapter *adapter)
-+{
-+ if (!(adapter->class & I2C_CLASS_HWMON))
-+ return 0;
-+
-+ return i2c_probe(adapter, &addr_data, lm75_detect);
-+}
-+
-+static struct attribute *lm75_attributes[] = {
-+ &sensor_dev_attr_temp1_input.dev_attr.attr,
-+ &sensor_dev_attr_temp1_max.dev_attr.attr,
-+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
-+
-+ NULL
-+};
-+
-+static const struct attribute_group lm75_group = {
-+ .attrs = lm75_attributes,
-+};
-+
-+/* This function is called by i2c_probe */
-+static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
-+{
-+ int i;
-+ struct i2c_client *new_client;
-+ struct lm75_data *data;
-+ int err = 0;
-+ const char *name = "";
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-+ I2C_FUNC_SMBUS_WORD_DATA))
-+ goto exit;
-+ /* OK. For now, we presume we have a valid client. We now create the
-+ client structure, even though we cannot fill it completely yet.
-+ But it allows us to access lm75_{read,write}_value. */
-+ if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
-+ err = -ENOMEM;
-+ goto exit;
-+ }
-+
-+ new_client = &data->client;
-+ i2c_set_clientdata(new_client, data);
-+ new_client->addr = address;
-+ new_client->adapter = adapter;
-+ new_client->driver = &lm75_driver;
-+ new_client->flags = 0;
-+
-+ name = "lm75";
-+
-+ /* Fill in the remaining client fields and put it into the global list */
-+ strlcpy(new_client->name, name, I2C_NAME_SIZE);
-+ data->valid = 0;
-+ mutex_init(&data->update_lock);
-+
-+ /* Tell the I2C layer a new client has arrived */
-+ if ((err = i2c_attach_client(new_client)))
-+ goto exit_free;
-+
-+ /* Initialize the LM75 chip */
-+ lm75_init_client(new_client);
-+
-+ /* Register sysfs hooks */
-+ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
-+ goto exit_detach;
-+
-+ data->hwmon_dev = hwmon_device_register(&new_client->dev);
-+ if (IS_ERR(data->hwmon_dev)) {
-+ err = PTR_ERR(data->hwmon_dev);
-+ goto exit_remove;
-+ }
-+
-+ return 0;
-+
-+exit_remove:
-+ sysfs_remove_group(&new_client->dev.kobj, &lm75_group);
-+exit_detach:
-+ i2c_detach_client(new_client);
-+exit_free:
-+ kfree(data);
-+exit:
-+ return err;
-+}
-+
-+static int lm75_detach_client(struct i2c_client *client)
-+{
-+ struct lm75_data *data = i2c_get_clientdata(client);
-+ hwmon_device_unregister(data->hwmon_dev);
-+ sysfs_remove_group(&client->dev.kobj, &lm75_group);
-+ i2c_detach_client(client);
-+ kfree(data);
-+ return 0;
-+}
-+
-+/* All registers are word-sized, except for the configuration register.
-+ LM75 uses a high-byte first convention, which is exactly opposite to
-+ the SMBus standard. */
-+static int lm75_read_value(struct i2c_client *client, u8 reg)
-+{
-+ int value;
-+
-+ if (reg == LM75_REG_CONF)
-+ return i2c_smbus_read_byte_data(client, reg);
-+
-+ value = i2c_smbus_read_word_data(client, reg);
-+ return (value < 0) ? value : swab16(value);
-+}
-+
-+static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
-+{
-+ if (reg == LM75_REG_CONF)
-+ return i2c_smbus_write_byte_data(client, reg, value);
-+ else
-+ return i2c_smbus_write_word_data(client, reg, swab16(value));
-+}
-+
-+static void lm75_init_client(struct i2c_client *client)
-+{
-+ int reg;
-+
-+ /* Enable if in shutdown mode */
-+ reg = lm75_read_value(client, LM75_REG_CONF);
-+ if (reg >= 0 && (reg & 0x01))
-+ lm75_write_value(client, LM75_REG_CONF, reg & 0xfe);
-+}
-+
-+static struct lm75_data *lm75_update_device(struct device *dev)
-+{
-+ struct i2c_client *client = to_i2c_client(dev);
-+ struct lm75_data *data = i2c_get_clientdata(client);
-+
-+ mutex_lock(&data->update_lock);
-+
-+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
-+ || !data->valid) {
-+ int i;
-+ dev_dbg(&client->dev, "Starting lm75 update\n");
-+
-+ for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
-+ int status;
-+
-+ status = lm75_read_value(client, LM75_REG_TEMP[i]);
-+ if (status < 0)
-+ dev_dbg(&client->dev, "reg %d, err %d\n",
-+ LM75_REG_TEMP[i], status);
-+ else
-+ data->temp[i] = status;
-+ }
-+ data->last_updated = jiffies;
-+ data->valid = 1;
-+ }
-+
-+ mutex_unlock(&data->update_lock);
-+
-+ return data;
-+}
-+
-+static int __init sensors_lm75_init(void)
-+{
-+ return i2c_add_driver(&lm75_driver);
-+}
-+
-+static void __exit sensors_lm75_exit(void)
-+{
-+ i2c_del_driver(&lm75_driver);
-+}
-+
-+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
-+MODULE_DESCRIPTION("LM75 driver");
-+MODULE_LICENSE("GPL");
-+
-+module_init(sensors_lm75_init);
-+module_exit(sensors_lm75_exit);
-diff -Nru linux-2.6.26-officiel/drivers/hwmon/Makefile /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/hwmon/Makefile
---- linux-2.6.26-officiel/drivers/hwmon/Makefile 2008-07-13 23:51:29.000000000 +0200
-+++ /home/guilig/workspace/kernel-goobie-2.6.26/src/drivers/hwmon/Makefile 2008-11-06 11:26:13.000000000 +0100
-@@ -47,6 +47,7 @@
- obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
- obj-$(CONFIG_SENSORS_LM63) += lm63.o
- obj-$(CONFIG_SENSORS_LM70) += lm70.o
-+obj-$(CONFIG_SENSORS_LM73) += lm73.o
- obj-$(CONFIG_SENSORS_LM75) += lm75.o
- obj-$(CONFIG_SENSORS_LM77) += lm77.o
- obj-$(CONFIG_SENSORS_LM78) += lm78.o
diff --git a/packages/linux/linux-2.6.26/boc01/007-081127-lm73.patch b/packages/linux/linux-2.6.26/boc01/007-081127-lm73.patch
new file mode 100644
index 0000000000..14787f8b04
--- /dev/null
+++ b/packages/linux/linux-2.6.26/boc01/007-081127-lm73.patch
@@ -0,0 +1,275 @@
+diff -Nru linux-2.6.26/drivers/hwmon/Kconfig linux-2.6.26.mod/drivers/hwmon/Kconfig
+--- linux-2.6.26/drivers/hwmon/Kconfig 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.mod/drivers/hwmon/Kconfig 2008-11-18 11:54:04.000000000 +0100
+@@ -390,6 +390,15 @@
+ This driver can also be built as a module. If so, the module
+ will be called lm70.
+
++config SENSORS_LM73
++ tristate "National Semiconductor LM73"
++ depends on I2C
++ help
++ If you say yes here you get support for National Semiconductor LM73
++ sensor chips
++ This driver can also be built as a module. If so, the module
++ will be called lm73.
++
+ config SENSORS_LM75
+ tristate "National Semiconductor LM75 and compatibles"
+ depends on I2C
+diff -Nru linux-2.6.26/drivers/hwmon/lm73.c linux-2.6.26.mod/drivers/hwmon/lm73.c
+--- linux-2.6.26/drivers/hwmon/lm73.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26.mod/drivers/hwmon/lm73.c 2008-11-27 11:46:31.000000000 +0100
+@@ -0,0 +1,241 @@
++ /*
++ * LM73 Sensor driver
++ * Based on LM75
++ *
++ *
++ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
++ * Guillaume Ligneul
++ * Guillaume.ligneul@gmail.com
++ *
++ * This software program is licensed subject to the GNU General Public License
++ * (GPL).Version 2,June 1991, available at http://www.fsf.org/copyleft/gpl.html
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/jiffies.h>
++#include <linux/i2c.h>
++#include <linux/hwmon.h>
++#include <linux/hwmon-sysfs.h>
++#include <linux/err.h>
++#include <linux/mutex.h>
++
++
++/* Addresses to scan */
++static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
++ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
++
++/* Insmod parameters */
++I2C_CLIENT_INSMOD_1(lm73);
++
++/* LM73 registers */
++#define LM73_REG_INPUT 0x00
++#define LM73_REG_CONF 0x01
++#define LM73_REG_T_HIGH 0x02
++#define LM73_REG_T_LOW 0x03
++
++static const u8 LM73_REG_TEMP[3] = {
++ LM73_REG_INPUT, /* input */
++ LM73_REG_T_HIGH, /* max */
++ LM73_REG_T_LOW, /* min */
++};
++
++/* Each client has this additional data */
++struct lm73_data {
++ struct i2c_client client;
++ struct device *hwmon_dev;
++ struct mutex update_lock;
++ char valid; /* !=0 if following fields are valid */
++ unsigned long last_updated; /* In jiffies */
++ u16 temp[3]; /* Register values,
++ 0 = input
++ 1 = max
++ 2 = min */
++};
++
++static int lm73_attach_adapter(struct i2c_adapter *adapter);
++static int lm73_detect(struct i2c_adapter *adapter, int address, int kind);
++static int lm73_detach_client(struct i2c_client *client);
++static int lm73_read_value(struct i2c_client *client, u8 reg);
++static int lm73_write_value(struct i2c_client *client, u8 reg, short value);
++
++/* This is the driver that will be inserted */
++static struct i2c_driver lm73_driver = {
++ .driver = {
++ .name = "lm73",
++ },
++ .attach_adapter = lm73_attach_adapter,
++ .detach_client = lm73_detach_client,
++};
++
++static ssize_t show_temp(struct device *dev, struct device_attribute *da,
++ char *buf)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++ struct i2c_client *client = to_i2c_client(dev);
++ int iTemp = 0;
++
++ iTemp = lm73_read_value(client, LM73_REG_TEMP[attr->index]);
++
++ return sprintf(buf, "%d\n", iTemp);
++
++
++}
++
++static ssize_t set_temp(struct device *dev, struct device_attribute *da,
++ const char *buf, size_t count)
++{
++ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
++ struct i2c_client *client = to_i2c_client(dev);
++ int nr = attr->index;
++
++ long tmp = simple_strtol(buf, NULL, 10);
++
++ lm73_write_value(client, LM73_REG_TEMP[nr], tmp);
++ return count;
++}
++
++static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
++ show_temp, set_temp, 1);
++static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
++ show_temp, set_temp, 2);
++static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
++
++static int lm73_attach_adapter(struct i2c_adapter *adapter)
++{
++ if (!(adapter->class & I2C_CLASS_HWMON))
++ return 0;
++
++ return i2c_probe(adapter, &addr_data, lm73_detect);
++}
++
++static struct attribute *lm73_attributes[] = {
++ &sensor_dev_attr_temp1_input.dev_attr.attr,
++ &sensor_dev_attr_temp1_max.dev_attr.attr,
++ &sensor_dev_attr_temp1_min.dev_attr.attr,
++
++ NULL
++};
++
++static const struct attribute_group lm73_group = {
++ .attrs = lm73_attributes,
++};
++
++/* This function is called by i2c_probe */
++static int lm73_detect(struct i2c_adapter *adapter, int address, int kind)
++{
++ struct i2c_client *new_client;
++ struct lm73_data *data;
++ int err = 0;
++ const char *name = "";
++
++ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
++ I2C_FUNC_SMBUS_WORD_DATA))
++ goto exit;
++
++ if (!(data = kzalloc(sizeof(struct lm73_data), GFP_KERNEL))) {
++ err = -ENOMEM;
++ goto exit;
++ }
++
++ new_client = &data->client;
++ i2c_set_clientdata(new_client, data);
++ new_client->addr = address;
++ new_client->adapter = adapter;
++ new_client->driver = &lm73_driver;
++ new_client->flags = 0;
++
++ name = "lm73";
++
++ /* Fill in the remaining client fields and put it into the global list */
++ strlcpy(new_client->name, name, I2C_NAME_SIZE);
++ data->valid = 0;
++ mutex_init(&data->update_lock);
++
++ /* Tell the I2C layer a new client has arrived */
++ if ((err = i2c_attach_client(new_client)))
++ goto exit_free;
++
++ /* Register sysfs hooks */
++ if ((err = sysfs_create_group(&new_client->dev.kobj, &lm73_group)))
++ goto exit_detach;
++
++ data->hwmon_dev = hwmon_device_register(&new_client->dev);
++ if (IS_ERR(data->hwmon_dev)) {
++ err = PTR_ERR(data->hwmon_dev);
++ goto exit_remove;
++ }
++
++ return 0;
++
++exit_remove:
++ sysfs_remove_group(&new_client->dev.kobj, &lm73_group);
++exit_detach:
++ i2c_detach_client(new_client);
++exit_free:
++ kfree(data);
++exit:
++ return err;
++}
++
++static int lm73_detach_client(struct i2c_client *client)
++{
++ struct lm73_data *data = i2c_get_clientdata(client);
++ hwmon_device_unregister(data->hwmon_dev);
++ sysfs_remove_group(&client->dev.kobj, &lm73_group);
++ i2c_detach_client(client);
++ kfree(data);
++ return 0;
++}
++
++static int lm73_read_value(struct i2c_client *client, u8 reg)
++{
++ short sVal;
++
++ if (reg == LM73_REG_CONF)
++ return i2c_smbus_read_byte_data(client, reg);
++ else
++ {
++ sVal = swab16(i2c_smbus_read_word_data(client, reg));
++ sVal = sVal >> 7;
++
++ if(sVal & 0xFFFF)
++ {
++ sVal = sVal - 0x1;
++ sVal = ~sVal;
++
++ return -sVal;
++ }
++ }
++
++}
++
++static int lm73_write_value(struct i2c_client *client, u8 reg, short value)
++{
++ if (reg == LM73_REG_CONF)
++ return i2c_smbus_write_byte_data(client, reg, value);
++ else
++ {
++ value = value<<7;
++ return i2c_smbus_write_word_data(client, reg, swab16(value));
++
++ }
++}
++
++static int __init sensors_lm73_init(void)
++{
++ return i2c_add_driver(&lm73_driver);
++}
++
++static void __exit sensors_lm73_exit(void)
++{
++ i2c_del_driver(&lm73_driver);
++}
++
++MODULE_AUTHOR("Ligneul Guillaume <guillaume.ligneul@gmail.com>");
++MODULE_DESCRIPTION("LM73 driver");
++MODULE_LICENSE("GPL");
++
++module_init(sensors_lm73_init);
++module_exit(sensors_lm73_exit);
+diff -Nru linux-2.6.26/drivers/hwmon/Makefile linux-2.6.26.mod/drivers/hwmon/Makefile
+--- linux-2.6.26/drivers/hwmon/Makefile 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.mod/drivers/hwmon/Makefile 2008-11-18 11:54:04.000000000 +0100
+@@ -47,6 +47,7 @@
+ obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
+ obj-$(CONFIG_SENSORS_LM63) += lm63.o
+ obj-$(CONFIG_SENSORS_LM70) += lm70.o
++obj-$(CONFIG_SENSORS_LM73) += lm73.o
+ obj-$(CONFIG_SENSORS_LM75) += lm75.o
+ obj-$(CONFIG_SENSORS_LM77) += lm77.o
+ obj-$(CONFIG_SENSORS_LM78) += lm78.o
diff --git a/packages/linux/linux-2.6.26/boc01/008-081105-spi.patch b/packages/linux/linux-2.6.26/boc01/008-081105-spi.patch
deleted file mode 100644
index 0c2ddf3383..0000000000
--- a/packages/linux/linux-2.6.26/boc01/008-081105-spi.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-diff -Nru linux-2.6.26-officiel/arch/powerpc/platforms/83xx/mpc831x_rdb.c /home/guilig/workspace/kernel-goobie-2.6.26/src/arch/powerpc/platforms/83xx/mpc831x_rdb.c
---- linux-2.6.26-officiel/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2008-07-13 23:51:29.000000000 +0200
-+++ /home/guilig/workspace/kernel-goobie-2.6.26/src/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2008-09-26 11:51:32.000000000 +0200
-@@ -15,16 +15,95 @@
-
- #include <linux/pci.h>
- #include <linux/of_platform.h>
--
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/mmc_spi.h>
-+#include <linux/mmc/host.h>
-+#include <linux/of_platform.h>
-+#include <sysdev/fsl_soc.h>
-+#include <asm/qe.h>
-+#include <asm/qe_ic.h>
-+#include <asm/time.h>
-+#include <asm/ipic.h>
-+#include <asm/udbg.h>
- #include <asm/time.h>
- #include <asm/ipic.h>
- #include <asm/udbg.h>
-+#include <sysdev/fsl_soc.h>
-+
-
- #include "mpc83xx.h"
-
- /*
- * Setup the architecture
- */
-+struct gpio {
-+ __be32 gpdir;
-+ __be32 gpodr;
-+ __be32 gpdat;
-+ __be32 gpier;
-+ __be32 gpimr;
-+ __be32 gpicr;
-+} __attribute__ ((packed));
-+static struct gpio *gpio_regs;
-+
-+static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
-+{
-+ //printk(KERN_INFO "%s %d %d\n", __func__, cs, polarity);
-+ if (polarity)
-+ setbits32(&gpio_regs->gpdat, 1 << (31 - 13));
-+ else
-+ clrbits32(&gpio_regs->gpdat, 1 << (31 - 13));
-+}
-+
-+static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
-+{
-+ //printk(KERN_INFO "%s %d %d\n", __func__, cs, polarity);
-+ if (polarity)
-+ clrbits32(&gpio_regs->gpdat, 1 << (31 - 13));
-+ else
-+ setbits32(&gpio_regs->gpdat, 1 << (31 - 13));
-+
-+}
-+
-+static struct mmc_spi_platform_data mpc8313_mmc_pdata = {
-+ .ocr_mask = MMC_VDD_33_34,
-+};
-+
-+static struct spi_board_info mpc8313_spi_boardinfo = {
-+ .bus_num = 0x7000,
-+ .chip_select = 0,
-+ .max_speed_hz = 50000000,
-+ .modalias = "spidev",
-+ .platform_data = &mpc8313_mmc_pdata,
-+};
-+
-+static int __init mpc8313_spi_init(void)
-+{
-+ __be32 __iomem *psicrl;
-+
-+ /* System I/O Configuration Register Low */
-+ psicrl = ioremap(get_immrbase() + MPC83XX_SICRL_OFFS, 0x4);
-+ gpio_regs = ioremap(get_immrbase() + 0xc00, 0x20);
-+ if (!psicrl || !gpio_regs)
-+ return -ENOMEM;
-+
-+ clrbits32(psicrl, 0x03F00000);
-+ setbits32(psicrl, 0x30000000);
-+ iounmap(psicrl);
-+
-+ /* set GPIO13 as output */
-+ setbits32(&gpio_regs->gpdir, 1 << (31 - 13));
-+ clrbits32(&gpio_regs->gpodr, 1 << (31 - 13));
-+ setbits32(&gpio_regs->gpdat, 1 << (31 - 13));
-+
-+ return fsl_spi_init(&mpc8313_spi_boardinfo, 1,
-+ mpc83xx_spi_activate_cs,
-+ mpc83xx_spi_deactivate_cs);
-+}
-+
-+device_initcall(mpc8313_spi_init);
-+
- static void __init mpc831x_rdb_setup_arch(void)
- {
- #ifdef CONFIG_PCI
diff --git a/packages/linux/linux-2.6.26/boc01/008-081127-spi.patch b/packages/linux/linux-2.6.26/boc01/008-081127-spi.patch
new file mode 100644
index 0000000000..41777a5753
--- /dev/null
+++ b/packages/linux/linux-2.6.26/boc01/008-081127-spi.patch
@@ -0,0 +1,327 @@
+--- linux-2.6.26.orig/drivers/spi/spi_mpc83xx.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/spi/spi_mpc83xx.c 2008-11-26 11:32:07.000000000 +0100
+@@ -27,6 +27,8 @@
+ #include <asm/irq.h>
+ #include <asm/io.h>
+
++//#define DBG_SPI 1
++
+ /* SPI Controller registers */
+ struct mpc83xx_spi_reg {
+ u8 res1[0x20];
+@@ -114,6 +116,7 @@
+
+ static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+ {
++
+ out_be32(reg, val);
+ }
+
+@@ -157,11 +160,17 @@
+
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (163)\n");
++#endif DBG_SPI
++
+ if (value == BITBANG_CS_INACTIVE) {
+ if (mpc83xx_spi->deactivate_cs)
+ mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+ }
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (171)\n");
++#endif DBG_SPI
+ if (value == BITBANG_CS_ACTIVE) {
+ u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+@@ -171,6 +180,9 @@
+ mpc83xx_spi->get_tx = cs->get_tx;
+
+ if (cs->hw_mode != regval) {
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (184)\n");
++#endif DBG_SPI
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
+
+@@ -184,6 +196,9 @@
+ mpc83xx_spi_write_reg(tmp_ptr, regval);
+ local_irq_restore(flags);
+ }
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_chipselect (196)\n");
++#endif DBG_SPI
+ if (mpc83xx_spi->activate_cs)
+ mpc83xx_spi->activate_cs(spi->chip_select, pol);
+ }
+@@ -266,26 +281,38 @@
+
+ cs->hw_mode |= SPMODE_LEN(bits_per_word);
+
+- if ((mpc83xx_spi->spibrg / hz) >= 64) {
++ /*if ((mpc83xx_spi->spibrg / hz) >= 64) {
+ pm = mpc83xx_spi->spibrg / (hz * 64) - 1;
+- if (pm > 0x0f) {
++ if (pm > 0x0f) {*/
++ if ((mpc83xx_spi->spibrg / hz) > 64) {
++ cs->hw_mode |= SPMODE_DIV16;
++ pm = mpc83xx_spi->spibrg / (hz * 64);
++ if (pm > 16) {
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+- pm = 0x0f;
++ pm = 16;
+ }
+- cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
+- } else {
++ //cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
++ } else
+ pm = mpc83xx_spi->spibrg / (hz * 4);
+- if (pm)
+- pm--;
+- cs->hw_mode |= SPMODE_PM(pm);
+- }
++ if (pm)
++ pm--;
++ cs->hw_mode = 0x0F700000;
++ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
+ regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup_transfer regval=%4X\n",regval);
++#endif
++
++
++
+ if (cs->hw_mode != regval) {
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
+-
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup_transfer cs->hw_mode=%4X\n",cs->hw_mode);
++#endif
+ regval = cs->hw_mode;
+ /* Turn off IRQs locally to minimize time
+ * that SPI is disabled
+@@ -322,15 +349,24 @@
+ /* enable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_bufs (338)\n");
++#endif
++
+ /* transmit word */
+ word = mpc83xx_spi->get_tx(mpc83xx_spi);
+- mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
++ mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_bufs (345)\n");
++#endif
+ wait_for_completion(&mpc83xx_spi->done);
+
+ /* disable rx ints */
+ mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_bufs (352)\n");
++#endif
+ return mpc83xx_spi->count;
+ }
+
+@@ -360,15 +396,22 @@
+ if (t->bits_per_word || t->speed_hz) {
+ /* Don't allow changes if CS is active */
+ status = -EINVAL;
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_work (366)\n");
++#endif
+ if (cs_change)
+ status = mpc83xx_spi_setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ }
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_work (374)\n");
++#endif
+ if (cs_change)
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
++#ifdef DBG_SPI
++printk(KERN_INFO "mpc83xx_spi_work (379)\n");
++#endif
+ cs_change = t->cs_change;
+ if (t->len)
+ status = mpc83xx_spi_bufs(spi, t);
+@@ -439,26 +482,39 @@
+ cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ /* mask out bits we are going to set */
+ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
+- | SPMODE_REV | SPMODE_LOOP);
+-
+- if (spi->mode & SPI_CPHA)
++ | SPMODE_REV);
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup (475) cs->hw_mode=0x%4X\n",cs->hw_mode);
++#endif
++ /*if (spi->mode & SPI_CPHA)
+ cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
+ if (spi->mode & SPI_CPOL)
+ cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
+ if (!(spi->mode & SPI_LSB_FIRST))
+- cs->hw_mode |= SPMODE_REV;
+- if (spi->mode & SPI_LOOP)
+- cs->hw_mode |= SPMODE_LOOP;
++ cs->hw_mode |= SPMODE_REV;*/
++ //if (spi->mode & SPI_LOOP)
++ // cs->hw_mode |= SPMODE_LOOP;
++cs->hw_mode = 0x0F700000;
++mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode,cs->hw_mode);
++cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
++
+
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup (486) cs->hw_mode=0x%4X\n",cs->hw_mode);
++#endif
+ retval = mpc83xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0) {
++#ifdef DBG_SPI
++printk("mpc83xx_spi_setup (491) ");
++#endif
+ cs->hw_mode = hw_mode; /* Restore settings */
+ return retval;
+ }
+-
+- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n",
++#ifdef DBG_SPI
++ printk(KERN_INFO "%s, mode %d, %u bits/w, %u Hz\n",
+ __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ spi->bits_per_word, spi->max_speed_hz);
++#endif
+ #if 0 /* Don't think this is needed */
+ /* NOTE we _need_ to call chipselect() early, ideally with adapter
+ * setup, unless the hardware defaults cooperate to avoid confusion
+@@ -518,7 +574,9 @@
+ {
+ struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+-
++#ifdef DBG_SPI
++printk(KERN_INFO "Debut_transfert\n");
++#endif
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+@@ -600,10 +658,12 @@
+ goto unmap_io;
+ }
+
++printk(KERN_INFO "irq_spi : 0x%2X\n", mpc83xx_spi->irq);
++
+ /* Register for SPI Interrupt */
+ ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+ 0, "mpc83xx_spi", mpc83xx_spi);
+-
++printk(KERN_INFO "irq_spi : 0x%2X\n", mpc83xx_spi->irq);
+ if (ret != 0)
+ goto unmap_io;
+
+@@ -628,7 +688,7 @@
+ INIT_LIST_HEAD(&mpc83xx_spi->queue);
+
+ mpc83xx_spi->workqueue = create_singlethread_workqueue(
+- master->dev.parent->bus_id);
++ dev->dev.bus_id);
+ if (mpc83xx_spi->workqueue == NULL) {
+ ret = -EBUSY;
+ goto free_irq;
+--- linux-2.6.26/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26.mod/arch/powerpc/platforms/83xx/mpc831x_rdb.c 2008-11-27 11:55:52.000000000 +0100
+@@ -15,16 +15,82 @@
+
+ #include <linux/pci.h>
+ #include <linux/of_platform.h>
+-
++#include <linux/interrupt.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/mmc_spi.h>
++#include <linux/mmc/host.h>
++#include <linux/of_platform.h>
++#include <sysdev/fsl_soc.h>
++#include <asm/qe.h>
++#include <asm/qe_ic.h>
++#include <asm/time.h>
++#include <asm/ipic.h>
++#include <asm/udbg.h>
+ #include <asm/time.h>
+ #include <asm/ipic.h>
+ #include <asm/udbg.h>
++#include <sysdev/fsl_soc.h>
++
+
+ #include "mpc83xx.h"
+
+ /*
+ * Setup the architecture
+ */
++
++struct gpio {
++ __be32 gpdir;
++ __be32 gpodr;
++ __be32 gpdat;
++ __be32 gpier;
++ __be32 gpimr;
++ __be32 gpicr;
++} __attribute__ ((packed));
++static struct gpio *gpio_regs;
++
++static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
++{
++ if (polarity)
++ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
++ else
++ clrbits32(&gpio_regs->gpdat, 1 << (31 - 14));
++}
++
++static void mpc83xx_spi_deactivate_cs(u8 cs, u8 polarity)
++{
++ if (polarity)
++ clrbits32(&gpio_regs->gpdat, 1 << (31 - 14) );
++ else
++ setbits32(&gpio_regs->gpdat, 1 << (31 - 14) );
++
++}
++
++static struct spi_board_info mpc8313_spi_boardinfo = {
++ .bus_num = 0x7000,
++ .chip_select = 0,
++ .max_speed_hz = 50000000,
++ .modalias = "spidev",
++};
++
++static int __init mpc8313_spi_init(void)
++{
++ /* System I/O Configuration Register Low */
++ gpio_regs = ioremap(get_immrbase() + 0xc00, 0x20);
++ if ( !gpio_regs)
++ return -ENOMEM;
++
++ /* set GPIO14 as output */
++ setbits32(&gpio_regs->gpdir, 1 << (31 - 14));
++ clrbits32(&gpio_regs->gpodr, 1 << (31 - 14));
++ setbits32(&gpio_regs->gpdat, 1 << (31 - 14));
++
++ return fsl_spi_init(&mpc8313_spi_boardinfo, 1,
++ mpc83xx_spi_activate_cs,
++ mpc83xx_spi_deactivate_cs);
++}
++
++device_initcall(mpc8313_spi_init);
++
+ static void __init mpc831x_rdb_setup_arch(void)
+ {
+ #ifdef CONFIG_PCI
diff --git a/packages/linux/linux-2.6.26/boc01/013-081127-lcd.patch b/packages/linux/linux-2.6.26/boc01/013-081127-lcd.patch
new file mode 100644
index 0000000000..258ad6f9c9
--- /dev/null
+++ b/packages/linux/linux-2.6.26/boc01/013-081127-lcd.patch
@@ -0,0 +1,663 @@
+diff -uNr linux-2.6.26_orig/drivers/video/Kconfig linux-2.6.26/drivers/video/Kconfig
+--- linux-2.6.26_orig/drivers/video/Kconfig 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/video/Kconfig 2008-11-27 18:54:42.000000000 +0100
+@@ -480,6 +480,17 @@
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
++config FB_NOVA
++ tristate "Nova 7506 Monochrome LCD board support"
++ depends on FB
++ select FB_SYS_FILLRECT
++ select FB_SYS_COPYAREA
++ select FB_SYS_IMAGEBLIT
++ select FB_SYS_FOPS
++ help
++ This enables support for the Nova 7506 Monochrome LCD board. The board
++ is based on the NT7506 lcd controller.
++
+ config FB_ATARI
+ bool "Atari native chipset support"
+ depends on (FB = y) && ATARI
+diff -uNr linux-2.6.26_orig/drivers/video/Makefile linux-2.6.26/drivers/video/Makefile
+--- linux-2.6.26_orig/drivers/video/Makefile 2008-07-13 23:51:29.000000000 +0200
++++ linux-2.6.26/drivers/video/Makefile 2008-11-27 18:54:57.000000000 +0100
+@@ -13,8 +13,8 @@
+
+ obj-$(CONFIG_VT) += console/
+ obj-$(CONFIG_LOGO) += logo/
+-obj-y += backlight/ display/
+-
++obj-y += backlight/ display/
++obj-$(CONFIG_FB_NOVA) += N7506fb.o
+ obj-$(CONFIG_FB_CFB_FILLRECT) += cfbfillrect.o
+ obj-$(CONFIG_FB_CFB_COPYAREA) += cfbcopyarea.o
+ obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+diff -uNr linux-2.6.26_orig/drivers/video/N7506fb.c linux-2.6.26/drivers/video/N7506fb.c
+--- linux-2.6.26_orig/drivers/video/N7506fb.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26/drivers/video/N7506fb.c 2008-11-27 18:41:29.000000000 +0100
+@@ -0,0 +1,550 @@
++/*
++ * linux/drivers/video/N7506fb.c -- FB driver for Nova NT7506 monochrome LCD board
++ *
++ * Copyright (C) 2008, Alexandre Coffignal <alexandre.coffignal@cenosys.com>
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License. See the file COPYING in the main directory of this archive for
++ * more details.
++ *
++ * Layout is based on arcfb.c by Jaya Kumar
++ *
++ * This driver was written to be used with the Nova 7506 LCD board.
++ *
++ *
++ *
++ *
++ * Nova uses a
++ * set of NT7506 chips that control individual 128x128 LCD matrices.
++ * The interface between the board and the host is TTL based GPIO.
++ *
++ * General notes:
++ * - User must set tuhold. It's in microseconds. According to the 108 spec,
++ * the hold time is supposed to be at least 1 microsecond.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/slab.h>
++#include <linux/vmalloc.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/fb.h>
++#include <linux/init.h>
++#include <linux/NT7506.h>
++#include <linux/platform_device.h>
++
++#include <linux/uaccess.h>
++
++#define floor8(a) (a&(~0x07))
++#define floorXres(a,xres) (a&(~(xres - 1)))
++#define iceil8(a) (((int)((a+7)/8))*8)
++#define ceil128(a) (a|0x7F)
++#define ceilXres(a,xres) (a|(xres - 1))
++
++//NT7506 Hardware
++#define LCD_RST 0x08
++#define LCD_RSTN 0x00
++#define LCD_BCKLIGH 0x04
++#define LCD_BCKLIGHN 0x00
++#define LCD_RS 0x02
++#define LCD_RSN 0x00
++#define LCD_ERD 0x01
++#define LCD_ERDN 0x00
++
++//Base address
++#define LCD_BASE 0xf0000000
++#define LCD_SIZE 0x2
++
++#define CONTRASTE 0xF
++#define FRAME_PER_SECOND 5
++
++static struct resource *lcd_mem = NULL;
++static void * _lcd_io = NULL;
++static unsigned long tuhold;
++struct fb_info *info;
++static struct timer_list fb_timer;
++
++struct novafb_par {
++ atomic_t ref_count;
++ unsigned char cslut[9];
++ struct fb_info *info;
++ unsigned int irq;
++ spinlock_t lock;
++};
++
++static struct fb_fix_screeninfo novafb_fix __initdata = {
++ .id = "novafb",
++ .type = FB_TYPE_PACKED_PIXELS,
++ .visual = FB_VISUAL_MONO01,
++ .xpanstep = 1,
++ .ypanstep = 1,
++ .ywrapstep = 0,
++ .line_length=16,
++ .accel = FB_ACCEL_NONE,
++};
++
++static struct fb_var_screeninfo novafb_var __initdata = {
++ .xres = 128,
++ .yres = 128,
++ .xres_virtual = 128,
++ .yres_virtual = 128,
++ .bits_per_pixel = 1,
++ .nonstd = 1,
++};
++
++
++static void NT7506_init_lcd(char ael);
++
++static void NT7506_writeb_ctl(unsigned char value)
++{
++ unsigned short svalue;
++ svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERDN | LCD_BCKLIGH;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++ //The data on DB0/7 are latched at the falling edge of the E_RD signal
++ svalue=value<<8 | LCD_RSN | LCD_RST | LCD_ERD | LCD_BCKLIGH;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++}
++
++static void NT7506_writeb_data(unsigned char value)
++{
++ unsigned short svalue;
++ svalue=value<<8|LCD_RS |LCD_RST | LCD_ERD | LCD_BCKLIGH ;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++ //The data on DB0/7 are latched at the falling edge of the E_RD signal
++ svalue=value<<8|LCD_RS |LCD_RST | LCD_ERDN | LCD_BCKLIGH;
++ iowrite16(svalue, _lcd_io);
++ udelay(tuhold);
++}
++
++static void NT7506_set_start_line(unsigned char y)
++{
++ NT7506_writeb_ctl(NT_START_LINE);
++ NT7506_writeb_ctl(y);
++}
++
++static void NT7506_set_yaddr(unsigned char y)
++{
++ NT7506_writeb_ctl(NT_PAGE_ADDR+y);
++}
++
++static void NT7506_set_xaddr(unsigned char x)
++{
++ NT7506_writeb_ctl(NT_COL_MSB | (x >> 0x04) ); //Send high nibble
++ NT7506_writeb_ctl(NT_COL_LSB | (x & 0x0F) ); //Send low nibble
++}
++
++/* main novafb functions */
++
++static int novafb_open(struct fb_info *info, int user)
++{
++ struct novafb_par *par = info->par;
++ atomic_inc(&par->ref_count);
++ return 0;
++}
++
++static int novafb_release(struct fb_info *info, int user)
++{
++ struct novafb_par *par = info->par;
++ int count = atomic_read(&par->ref_count);
++ if (!count)
++ return -EINVAL;
++ atomic_dec(&par->ref_count);
++ return 0;
++}
++
++static int novafb_pan_display(struct fb_var_screeninfo *var,
++ struct fb_info *info)
++{
++ if ((var->vmode & FB_VMODE_YWRAP) && (var->yoffset < 128)
++ && (info->var.yres <= 128))
++ {
++ NT7506_set_start_line(var->yoffset);
++ info->var.yoffset = var->yoffset;
++ return 0;
++ }
++
++ return -EINVAL;
++}
++
++static void novafb_lcd_update(struct novafb_par *par, unsigned int dx,
++ unsigned int dy, unsigned int w, unsigned int h)
++{
++ int bit,x,y,xfb,yfb,width,height,i;
++ char mask=0;
++ char dest[2048];
++ char * src;
++ char value;
++ src = (unsigned char __force *) par->info->screen_base;
++ for(i=0;i<2048;i++)
++ {
++ dest[i]=0;
++ }
++ for(x=0;x<128/*(width)*/;x++)
++ {
++ for(y=0;y<16/*height/8*/;y++)
++ {
++ xfb=x/8;
++ yfb=y*8;
++
++ for(bit=0;bit<8;yfb++,bit++)
++ {
++ mask = (1<<(7-(x%8)));
++ if(((src[yfb*16+xfb]&mask)))
++ value=1;
++ else
++ value=0;
++
++ dest[y*128+x]+= (value<<bit);
++ }
++ }
++ }
++
++ height=16;
++ width=128;
++
++ for (y = 0; y < height; y++)
++ {
++ NT7506_set_yaddr(y);
++ NT7506_set_xaddr(0);
++ for (x = 0; x < width; x++)
++ {
++ NT7506_writeb_data(dest[y*128+x]);
++ NT7506_writeb_data(0x00);
++ }
++ NT7506_writeb_data((unsigned char)0);
++ }
++}
++
++static void novafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
++{
++
++// sys_fillrect(info, rect);
++
++}
++
++
++
++static void novafb_copyarea(struct fb_info *info,
++ const struct fb_copyarea *area)
++{
++// sys_copyarea(info, area);
++}
++
++
++static void novafb_imageblit(struct fb_info *info, const struct fb_image *image)
++{
++ struct novafb_par *par = info->par;
++
++ int xfb,yfb,i=0;
++ char * src = (unsigned char __force *) par->info->screen_base;
++
++ for(yfb=image->dy;yfb<(image->height+image->dy);yfb++)
++ {
++ for(xfb=(image->dx)/8;xfb<(image->dx+image->width)/8;xfb++)
++ {
++ src[yfb*16+xfb]=image->data[i++];
++ }
++ }
++
++}
++
++/*
++ * this is the access path from userspace. they can seek and write to
++ * the fb. it's inefficient for them to do anything less than 128*8
++ * writes since we update the lcd in each write() anyway.
++ */
++static ssize_t novafb_write(struct fb_info *info, const char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ unsigned long p;
++ int err=-EINVAL;
++ unsigned int fbmemlength ;
++ struct novafb_par *par;
++ unsigned int xres;
++ p = *ppos;
++ par = info->par;
++ xres = info->var.xres;
++ fbmemlength = (xres * info->var.yres)/8;
++
++ if (p > fbmemlength)
++ {
++ return -ENOSPC;
++ }
++ err = 0;
++ if ((count + p) > fbmemlength) {
++ count = fbmemlength - p;
++ err = -ENOSPC;
++ }
++
++ if (count) {
++ char *base_addr;
++ base_addr = (char __force *)info->screen_base;
++ count -= copy_from_user(base_addr + p, buf, count);
++ *ppos += count;
++ err = -EFAULT;
++ }
++ if (count)
++ {
++ return count;
++ }
++ return err;
++}
++
++static int novafb_mmap(struct fb_info *info, struct vm_area_struct *vma)
++{
++ unsigned long off;
++ unsigned long start;
++ u32 len;
++
++ if (vma->vm_end - vma->vm_start == 0)
++ return 0;
++ if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
++ return -EINVAL;
++ off = vma->vm_pgoff << PAGE_SHIFT;
++ start = info->fix.smem_start;
++ len = info->fix.smem_len;
++ if (off >= len)
++ {
++ return -EINVAL;
++
++ }
++ if ((vma->vm_end - vma->vm_start + off) > len)
++ {
++ return -EINVAL;
++ }
++ off += start;
++ vma->vm_pgoff = off >> PAGE_SHIFT;
++ if (remap_pfn_range(vma, vma->vm_start, virt_to_phys((void *)info->fix.smem_start) >> PAGE_SHIFT,
++ info->fix.smem_len, vma->vm_page_prot))
++
++ {
++ return -EAGAIN;
++ }
++ return 0;
++
++}
++
++static struct fb_ops novafb_ops = {
++ .owner = THIS_MODULE,
++ .fb_open = novafb_open,
++ .fb_read = fb_sys_read,
++ .fb_write = novafb_write,
++ .fb_release = novafb_release,
++ .fb_pan_display = novafb_pan_display,
++ .fb_fillrect = novafb_fillrect,
++ .fb_copyarea = novafb_copyarea,
++ .fb_imageblit = novafb_imageblit,
++// .fb_ioctl = novafb_ioctl,
++ .fb_mmap =novafb_mmap,
++};
++
++
++static void
++novafb_refresh(int ignore_me )
++{
++ struct novafb_par *par = info->par;
++ novafb_lcd_update(par, 0, 0, 128,128);
++ fb_timer.expires = jiffies + (HZ/FRAME_PER_SECOND);
++ add_timer(&fb_timer);
++}
++
++static int
++__init novafb_probe(struct platform_device *dev)
++{
++
++ int retval = -ENOMEM;
++ char * src;
++ int i;
++
++ struct novafb_par *par;
++ static unsigned char *videomemory;
++ static int videomemorysize;
++
++ NT7506_init_lcd(CONTRASTE);
++
++ videomemorysize = (128*128/8)*2;
++
++ if (!(videomemory = kmalloc(videomemorysize,GFP_ATOMIC)))
++ return retval;
++ memset(videomemory, 0, videomemorysize);
++
++ info = framebuffer_alloc(sizeof(struct novafb_par), &dev->dev);
++
++ if (!info)
++ goto err;
++ info->screen_base = (char __iomem *)videomemory;
++ info->fbops = &novafb_ops;
++
++ info->var = novafb_var;
++ info->fix = novafb_fix;
++ info->fix.smem_start=(unsigned long)videomemory;
++ info->fix.smem_len = videomemorysize;
++
++ par = info->par;
++ par->info = info;
++ par->cslut[0] = 0x00;
++ par->cslut[1] = 0x06;
++ src = (unsigned char __force *) par->info->screen_base;
++ for(i=0;i<videomemorysize;i++)
++ {
++ src[i]=0;
++ }
++ info->flags = FBINFO_FLAG_DEFAULT;
++ spin_lock_init(&par->lock);
++ platform_set_drvdata(dev, info);
++ retval = register_framebuffer(info);
++ if (retval < 0)
++ goto err1;
++
++ init_timer(&fb_timer);
++ fb_timer.function = novafb_refresh;
++ fb_timer.expires = jiffies + (HZ / FRAME_PER_SECOND);
++ add_timer(&fb_timer);
++
++ printk(KERN_INFO
++ "fb%d: nova frame buffer device, using %dK of video memory\n",
++ info->node, videomemorysize >> 10);
++ return 0;
++err1:
++ framebuffer_release(info);
++err:
++ vfree(videomemory);
++ return retval;
++}
++
++static int novafb_remove(struct platform_device *dev)
++{
++ struct fb_info *info = platform_get_drvdata(dev);
++
++ if (info) {
++ unregister_framebuffer(info);
++ vfree((void __force *)info->screen_base);
++ framebuffer_release(info);
++ }
++ return 0;
++}
++
++static struct platform_driver novafb_driver = {
++ .probe = novafb_probe,
++ .remove = novafb_remove,
++ .driver = {
++ .name = "novafb",
++ },
++};
++
++static struct platform_device *novafb_device;
++
++static int __init novafb_init(void)
++{
++ int ret;
++
++
++ if (!(lcd_mem = request_mem_region(LCD_BASE, LCD_SIZE, "mpc8313-lcd")))
++ return -ENOMEM;
++
++ if (!(_lcd_io = ioremap(LCD_BASE, LCD_SIZE)))
++ {
++ release_mem_region(LCD_BASE, LCD_SIZE);
++ lcd_mem = NULL;
++ return -ENOMEM;
++ }
++ ret = platform_driver_register(&novafb_driver);
++
++ if (!ret) {
++ novafb_device = platform_device_alloc("novafb", 0);
++ if (novafb_device)
++ {
++ ret = platform_device_add(novafb_device);
++ }
++ else
++ {
++ ret = -ENOMEM;
++ }
++ if (ret)
++ {
++ platform_device_put(novafb_device);
++ platform_driver_unregister(&novafb_driver);
++ }
++
++ }
++
++
++ return ret;
++
++}
++
++
++static void NT7506_init_lcd(char ael)
++{
++ /* this resets the lcd*/
++ iowrite16(LCD_RSTN | LCD_ERD | LCD_BCKLIGH, _lcd_io);
++ udelay(100);
++ iowrite16(LCD_RST| LCD_ERD | LCD_BCKLIGH, _lcd_io);
++ udelay(200);
++ /* Soft reset*/
++ NT7506_writeb_ctl(NT_RESET);
++ /* Disable ICON display*/
++ NT7506_writeb_ctl(NT_ICON|OFF);
++ /* Sets the duty ratio 1/128*/
++ NT7506_writeb_ctl(NT_DUTY); NT7506_writeb_ctl(DUTY_1_128);
++ /* Sets reverse direction between RAM column address and segment driver*/
++ NT7506_writeb_ctl(NT_ADC_REV);
++ NT7506_writeb_ctl(NT_SHL_NOR);
++ /* Enales the built in Oscillator circuit.*/
++ NT7506_writeb_ctl(NT_OSC);
++ /* Set Initial row to 0*/
++ NT7506_writeb_ctl(NT_COM0); NT7506_writeb_ctl(0);
++ /* Sets DC-DC*/
++ NT7506_writeb_ctl(NT_DCDC|TIME6);
++ /* Selects resistance ratio of the internal resistor*/
++ NT7506_writeb_ctl(NT_REG_RES|RES_7_2);
++ /* set Reference Voltage mode*/
++ NT7506_writeb_ctl(NT_ELEC_VOL); NT7506_writeb_ctl(ael);
++ /* Selects LCD bias ratio*/
++ NT7506_writeb_ctl(NT_BIAS|BIAS_1_11);
++
++ NT7506_writeb_ctl(NT_DATA_DIR); NT7506_writeb_ctl(0);
++ NT7506_writeb_ctl(NT_FRC_PWM|PWM15);
++ /* Select power circuit functions */
++ NT7506_writeb_ctl(NT_POWER|VC);
++ udelay(5000);
++ NT7506_writeb_ctl(NT_POWER|VC|VR);
++ udelay(5000);
++ NT7506_writeb_ctl(NT_POWER|VC|VR|VF);
++ udelay(5000);
++ /* Reverses the display status on LCD panel */
++ NT7506_writeb_ctl(NT_REV_DISP|OFF);
++ /* Forces the whole LCD points to be turned on regardless of the contents of the display data RAM*/
++ NT7506_writeb_ctl(NT_DISP|ON);
++ /* Set Initial Start Line Address */
++ NT7506_writeb_ctl(NT_START_LINE); NT7506_writeb_ctl(0x00);
++
++}
++
++static void __exit novafb_exit(void)
++{
++ if (lcd_mem)
++ release_mem_region(LCD_BASE, LCD_SIZE);
++ lcd_mem = NULL;
++ platform_device_unregister(novafb_device);
++ platform_driver_unregister(&novafb_driver);
++}
++
++module_param(tuhold, ulong, 0);
++MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Nova board");
++
++module_init(novafb_init);
++module_exit(novafb_exit);
++
++MODULE_DESCRIPTION("fbdev driver for nova NT7506 monochrome LCD board");
++MODULE_AUTHOR("Alexandre Coffignal");
++MODULE_LICENSE("GPL");
++
+diff -uNr linux-2.6.26_orig/include/linux/NT7506.h linux-2.6.26/include/linux/NT7506.h
+--- linux-2.6.26_orig/include/linux/NT7506.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.26/include/linux/NT7506.h 2008-11-13 12:46:05.000000000 +0100
+@@ -0,0 +1,70 @@
++
++/*
++ * (C) Copyright 2008
++ * Alexandre Coffignal, CénoSYS, alexandre.coffignal@cenosys.com
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#ifndef __LINUX_NOVAFB_H__
++#define __LINUX_NOVAFB_H__
++
++
++//NT7506 Instructions
++#define NT_ICON 0xA2
++#define NT_PAGE_ADDR 0xB0
++#define NT_COL_MSB 0x10
++#define NT_COL_LSB 0x00
++#define NT_DISP 0xAE
++#define NT_START_LINE 0x40
++#define NT_COM0 0x44
++#define NT_DUTY 0x48
++#define DUTY_1_128 0x80
++#define NT_REV_DISP 0xA6
++#define NT_POWER 0x28
++#define VC 0x04
++#define VR 0x02
++#define VF 0x01
++#define NT_DCDC 0x64
++#define TIME6 0x03
++#define NT_REG_RES 0x20
++#define RES_7_2 0x07
++#define NT_ELEC_VOL 0x81
++#define NT_BIAS 0x50
++#define BIAS_1_11 0x06
++#define NT_ADC_NOR 0xA0
++#define NT_ADC_REV 0xA1
++#define NT_SHL_NOR 0xC0
++#define NT_SHL_REV 0xC8
++#define NT_OSC 0xAB
++#define NT_RESET 0xE2
++#define NT_DATA_DIR 0xe8
++#define NT_FRC_PWM 0x90
++#define PWM15 0x03
++
++#define ON 0x01
++#define OFF 0x00
++
++
++
++
++
++#endif
++
diff --git a/packages/linux/linux-2.6.26/boc01/boc01.dts b/packages/linux/linux-2.6.26/boc01/boc01.dts
index 725a11505f..dc66cb67bc 100644
--- a/packages/linux/linux-2.6.26/boc01/boc01.dts
+++ b/packages/linux/linux-2.6.26/boc01/boc01.dts
@@ -137,8 +137,7 @@
spi@7000 {
device_type = "spi";
cell-index = <0>;
- //compatible = "fsl,spi";
- compatible = "mpc83xx_spi";
+ compatible = "fsl,spi";
reg = <0x7000 0x1000>;
interrupts = <16 0x8>;
interrupt-parent = <&ipic>;
diff --git a/packages/linux/linux-2.6.26/boc01/defconfig b/packages/linux/linux-2.6.26/boc01/defconfig
index 42f33dbb78..6e99b8e1ff 100644
--- a/packages/linux/linux-2.6.26/boc01/defconfig
+++ b/packages/linux/linux-2.6.26/boc01/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26
-# Fri Nov 21 11:33:35 2008
+# Fri Nov 28 10:11:36 2008
#
# CONFIG_PPC64 is not set
@@ -841,6 +841,7 @@ CONFIG_MARVELL_PHY=y
CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -907,16 +908,22 @@ CONFIG_HOSTAP_PCI=m
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
+CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
-CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
@@ -996,7 +1003,10 @@ CONFIG_INPUT_CAPSENSE_BTNS=y
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1006,7 +1016,7 @@ CONFIG_DEVKMEM=y
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1218,11 +1228,11 @@ CONFIG_FB=y
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SYS_FOPS=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -1235,6 +1245,7 @@ CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_NOVA=y
# CONFIG_FB_OF is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_ASILIANT is not set
@@ -1267,6 +1278,19 @@ CONFIG_FB=y
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
#
@@ -1512,25 +1536,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
-
-#
-# MMC/SD Card Drivers
-#
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_BOUNCE=y
-# CONFIG_SDIO_UART is not set
-# CONFIG_MMC_TEST is not set
-
-#
-# MMC/SD Host Controller Drivers
-#
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_SPI is not set
+# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
@@ -1723,8 +1729,8 @@ CONFIG_LDM_PARTITION=y
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
@@ -1748,7 +1754,7 @@ CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
@@ -1758,7 +1764,7 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
@@ -1771,9 +1777,9 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-CONFIG_CRC_ITU_T=m
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-CONFIG_CRC7=m
+CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
diff --git a/packages/linux/linux_2.6.26.bb b/packages/linux/linux_2.6.26.bb
index 405655ba05..bb4df19c3a 100644
--- a/packages/linux/linux_2.6.26.bb
+++ b/packages/linux/linux_2.6.26.bb
@@ -1,6 +1,6 @@
require linux.inc
-PR = "r2"
+PR = "r3"
# Mark archs/machines that this kernel supports
DEFAULT_PREFERENCE = "-1"
@@ -17,13 +17,14 @@ SRC_URI_append_boc01 = "\
file://fsl-elbc-nand-backport.patch;patch=1 \
file://002-081105-headers.patch;patch=1 \
file://004-081105-usb.patch;patch=1 \
- file://005-081105-isl12024.patch;patch=1 \
+ file://005-081127-isl12024.patch;patch=1 \
file://006-081105-at24c32.patch;patch=1 \
- file://007-081105-lm73.patch;patch=1 \
- file://008-081105-spi.patch;patch=1 \
+ file://007-081127-lm73.patch;patch=1 \
+ file://008-081127-spi.patch;patch=1 \
file://010-081105-mii.patch;patch=1 \
file://011-081105-gpio.patch;patch=1 \
file://012-081121-cy3218-btns.patch;patch=1 \
+ file://013-081127-lcd.patch;patch=1 \
"
SRC_URI_append_mpc8313e-rdb = "\
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 18:22:09 +0000