summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--packages/linux/linux-omap-2.6.28/overo/defconfig41
-rw-r--r--packages/linux/linux-omap-2.6.28/overo/overo-ehci.patch113
-rw-r--r--packages/linux/linux-omap_2.6.28.bb7
3 files changed, 152 insertions, 9 deletions
diff --git a/packages/linux/linux-omap-2.6.28/overo/defconfig b/packages/linux/linux-omap-2.6.28/overo/defconfig
index c92e425140..76c9e90c0a 100644
--- a/packages/linux/linux-omap-2.6.28/overo/defconfig
+++ b/packages/linux/linux-omap-2.6.28/overo/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-omap1
-# Wed Feb 4 12:40:38 2009
+# Mon Feb 16 11:30:39 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -588,7 +588,7 @@ CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
+CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
@@ -599,7 +599,15 @@ CONFIG_MTD_NAND_IDS=y
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -1601,14 +1609,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1681,6 +1700,12 @@ CONFIG_JFFS2_RUBIN=y
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
@@ -1937,8 +1962,8 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
@@ -1951,7 +1976,7 @@ CONFIG_CRYPTO_HW=y
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
+CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
diff --git a/packages/linux/linux-omap-2.6.28/overo/overo-ehci.patch b/packages/linux/linux-omap-2.6.28/overo/overo-ehci.patch
new file mode 100644
index 0000000000..ff81d98095
--- /dev/null
+++ b/packages/linux/linux-omap-2.6.28/overo/overo-ehci.patch
@@ -0,0 +1,113 @@
+diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
+index 489439d..2c6305b 100644
+--- a/arch/arm/mach-omap2/usb-ehci.c
++++ b/arch/arm/mach-omap2/usb-ehci.c
+@@ -152,9 +152,7 @@ static void setup_ehci_io_mux(void)
+ void __init usb_ehci_init(void)
+ {
+ #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+- /* Setup Pin IO MUX for EHCI */
+- if (cpu_is_omap34xx())
+- setup_ehci_io_mux();
++ /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */
+
+ if (platform_device_register(&ehci_device) < 0) {
+ printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+
+diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
+index 1b3266c..8472996 100644
+--- a/drivers/usb/host/ehci-omap.c
++++ b/drivers/usb/host/ehci-omap.c
+@@ -48,16 +48,26 @@
+ * to get the PHY state machine in working state
+ */
+ #define EXTERNAL_PHY_RESET
++#ifdef CONFIG_MACH_OVERO
++#define EXT_PHY_RESET_GPIO_PORT2 (183)
++#else
+ #define EXT_PHY_RESET_GPIO_PORT1 (57)
+ #define EXT_PHY_RESET_GPIO_PORT2 (61)
++#endif
+ #define EXT_PHY_RESET_DELAY (10)
+
++#define PHY_STP_PULLUP_ENABLE (0x10)
++#define PHY_STP_PULLUP_DISABLE (0x90)
++
++
+ /* ISSUE2:
+ * USBHOST supports External charge pump PHYs only
+ * Use the VBUS from Port1 to power VBUS of Port2 externally
+ * So use Port2 as the working ULPI port
+ */
++#ifndef CONFIG_MACH_OVERO
+ #define VBUS_INTERNAL_CHARGEPUMP_HACK
++#endif
+
+ #endif /* CONFIG_OMAP_EHCI_PHY_MODE */
+
+@@ -225,14 +235,43 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
+
+ #ifdef EXTERNAL_PHY_RESET
+ /* Refer: ISSUE1 */
++#ifndef CONFIG_MACH_OVERO
+ gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset");
+ gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0);
++#endif
+ gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset");
+ gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0);
++ gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0);
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(EXT_PHY_RESET_DELAY);
+ #endif
+
++ /*
++ * The PHY register 0x7 - Interface Control register is
++ * configured to disable the integrated STP pull-up resistor
++ * used for interface protection.
++ *
++ * May not need to be here.
++ */
++ omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */
++ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */
++ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */
++ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */
++ (PHY_STP_PULLUP_DISABLE),
++ EHCI_INSNREG05_ULPI);
++
++ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)));
++
++ /* Force PHY to HS */
++ omap_writel((0x4 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* function ctrl */
++ (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/* Write */
++ (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */
++ (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */
++ (0x40),
++ EHCI_INSNREG05_ULPI);
++
++ while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)));
++
+ /* Configure TLL for 60Mhz clk for ULPI */
+ ehci_clocks->usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK);
+ if (IS_ERR(ehci_clocks->usbtll_fck_clk))
+@@ -307,7 +346,9 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
+ * Hold the PHY in RESET for enough time till PHY is settled and ready
+ */
+ udelay(EXT_PHY_RESET_DELAY);
++#ifndef CONFIG_MACH_OVERO
+ gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1);
++#endif
+ gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1);
+ #endif
+
+@@ -393,7 +434,9 @@ static void omap_stop_ehc(struct platform_device *dev, struct usb_hcd *hcd)
+
+
+ #ifdef EXTERNAL_PHY_RESET
++#ifndef CONFIG_MACH_OVERO
+ gpio_free(EXT_PHY_RESET_GPIO_PORT1);
++#endif
+ gpio_free(EXT_PHY_RESET_GPIO_PORT2);
+ #endif
+
+--
+1.6.0.4.790.gaa14a
diff --git a/packages/linux/linux-omap_2.6.28.bb b/packages/linux/linux-omap_2.6.28.bb
index 0924772d1a..ff1c5d2521 100644
--- a/packages/linux/linux-omap_2.6.28.bb
+++ b/packages/linux/linux-omap_2.6.28.bb
@@ -7,6 +7,7 @@ COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|
DEFAULT_PREFERENCE = "-1"
DEFAULT_PREFERENCE_beagleboard = "1"
+DEFAULT_PREFERENCE_overo = "1"
SRCREV = "79d042a081d3e467c735bb0d9569ed6296f85a3c"
@@ -47,19 +48,23 @@ SRC_URI_append = " \
file://0013-DSS-OMAPFB-remove-extra-spaces.patch;patch=1 \
file://0014-DSS-fix-clk_get_usecount.patch;patch=1 \
file://0001-ASoC-Add-support-for-OMAP3-EVM.patch;patch=1 \
- file://0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch;patch=1 \
file://0001-board-omap3beagle-set-i2c-3-to-100kHz.patch;patch=1 \
file://add-resizer-driver.patch;patch=1 \
"
SRC_URI_append_beagleboard = " file://logo_linux_clut224.ppm \
+ file://0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch;patch=1 \
"
SRC_URI_append_omap3evm = " \
file://evm-mcspi-ts.diff;patch=1 \
"
+SRC_URI_append_overo = " \
+ file://overo-ehci.patch;patch=1 \
+"
+
S = "${WORKDIR}/git"
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 19:41:55 +0000