diff options
61 files changed, 26571 insertions, 0 deletions
diff --git a/packages/uboot/u-boot-mkimage-gta01-native/.mtn2git_empty b/packages/uboot/u-boot-mkimage-gta01-native/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/.mtn2git_empty diff --git a/packages/uboot/u-boot-mkimage-gta01-native/bbt-create-optional.patch b/packages/uboot/u-boot-mkimage-gta01-native/bbt-create-optional.patch new file mode 100644 index 0000000000..d7a2a872e5 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/bbt-create-optional.patch @@ -0,0 +1,52 @@ +This patch makes creation of the BBT optional for the s3c24x0 platform. +It adds: + +- a new platform-independent NAND-wide flag NAND_DONT_CREATE_BBT +- one user of this flag, namely s3c24x0 + +Experimental. + +- Werner Almesberger <werner@openmoko.org> + + +Index: u-boot/cpu/arm920t/s3c24x0/nand.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/nand.c 2007-02-16 23:53:29.000000000 +0100 ++++ u-boot/cpu/arm920t/s3c24x0/nand.c 2007-02-16 23:53:54.000000000 +0100 +@@ -169,7 +169,7 @@ + + nand->eccmode = NAND_ECC_SOFT; + #ifdef CONFIG_S3C2410_NAND_BBT +- nand->options = NAND_USE_FLASH_BBT; ++ nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT; + #else + nand->options = 0; + #endif +Index: u-boot/drivers/nand/nand_bbt.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_bbt.c 2007-02-16 23:53:36.000000000 +0100 ++++ u-boot/drivers/nand/nand_bbt.c 2007-02-16 23:53:54.000000000 +0100 +@@ -678,7 +678,8 @@ + } + create: + /* Create the bad block table by scanning the device ? */ +- if (!(td->options & NAND_BBT_CREATE)) ++ if (!(td->options & NAND_BBT_CREATE) || ++ (this->options & NAND_DONT_CREATE_BBT)) + continue; + + /* Create the table in memory by scanning the chip(s) */ +Index: u-boot/include/linux/mtd/nand.h +=================================================================== +--- u-boot.orig/include/linux/mtd/nand.h 2007-02-16 23:53:08.000000000 +0100 ++++ u-boot/include/linux/mtd/nand.h 2007-02-16 23:53:54.000000000 +0100 +@@ -187,7 +187,8 @@ + * This can only work if we have the ecc bytes directly behind the + * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ + #define NAND_HWECC_SYNDROME 0x00020000 +- ++/* Do not create an BBT if none is found. Overrides NAND_BBT_CREATE. */ ++#define NAND_DONT_CREATE_BBT 0x00040000 + + /* Options set by nand scan */ + /* Nand scan has allocated oob_buf */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/bbt-scan-second.patch b/packages/uboot/u-boot-mkimage-gta01-native/bbt-scan-second.patch new file mode 100644 index 0000000000..37b2807908 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/bbt-scan-second.patch @@ -0,0 +1,69 @@ +Scan also the second OOB page for bad block information. + +board/neo1973/gta01/nand.c (board_nand_init): added board-specific badblock + pattern which sets NAND_BBT_SCAN2NDPAGE +drivers/nand/nand_base.c (nand_block_bad): also consider the second page in a + block if NAND_BBT_SCAN2NDPAGE is set + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/board/neo1973/gta01/nand.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/nand.c ++++ u-boot/board/neo1973/gta01/nand.c +@@ -113,9 +113,23 @@ + } + + ++/* Derived from drivers/nand/nand_bbt.c:smallpage_flashbased */ ++ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr badblock_pattern = { ++ .options = ++ NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES | NAND_BBT_SCAN2NDPAGE, ++ .offs = 5, ++ .len = 1, ++ .pattern = scan_ff_pattern ++}; ++ ++ + int board_nand_init(struct nand_chip *nand) + { + nand->read_otp = samsung_nand_read_otp; + nand->write_otp = samsung_nand_write_otp; ++ nand->badblock_pattern = &badblock_pattern; + return s3c24x0_nand_init(nand); + } +Index: u-boot/drivers/nand/nand_base.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_base.c ++++ u-boot/drivers/nand/nand_base.c +@@ -421,7 +421,7 @@ + * + * Check, if the block is bad. + */ +-static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) ++static int nand_block_bad_page(struct mtd_info *mtd, loff_t ofs, int getchip) + { + int page, chipnr, res = 0; + struct nand_chip *this = mtd->priv; +@@ -460,6 +460,18 @@ + return res; + } + ++static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (nand_block_bad_page(mtd, ofs, getchip)) ++ return 1; ++ if (this->badblock_pattern->options & NAND_BBT_SCAN2NDPAGE && ++ nand_block_bad_page(mtd, ofs+(1 << this->page_shift), getchip)) ++ return 1; ++ return 0; ++} ++ + /** + * nand_default_block_markbad - [DEFAULT] mark a block bad + * @mtd: MTD device structure diff --git a/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-and-nand.patch b/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-and-nand.patch new file mode 100644 index 0000000000..fa0de39ab7 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-and-nand.patch @@ -0,0 +1,98 @@ +Auto-detect whether we're booting from RAM or NAND, and act accordingly. This +allows us to use the same u-boot binary for all boot modes. + +include/configs/neo1973.h: introduced new config option + CONFIG_LL_INIT_NAND_ONLY to perform low-level initialization only when + booting from NAND +include/configs/neo1973.h: got rid of BUILD_FOR_RAM +cpu/arm920t/start.S: detect if we need to boot from NAND at run time (i.e., if + we're running at address 0) + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -157,18 +157,26 @@ + str r1, [r0] + #endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ + +- /* +- * we do sys-critical inits only at reboot, +- * not when booting from ram! +- */ + #ifndef CONFIG_SKIP_LOWLEVEL_INIT ++#ifndef CONFIG_LL_INIT_NAND_ONLY + bl cpu_init_crit + #endif ++#endif + + #ifndef CONFIG_SKIP_RELOCATE_UBOOT +-#ifndef CONFIG_S3C2410_NAND_BOOT +-relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ ++ ++#ifdef CONFIG_S3C2410_NAND_BOOT ++ /* are we running from NAND ? */ ++#define BWSCON 0x48000000 ++ ldr r1, =BWSCON /* Z = CPU booted from NAND */ ++ ldr r1, [r1] ++ tst r1, #6 /* BWSCON[2:1] = OM[1:0] */ ++ teqeq r0, #0 /* Z &= running at address 0 */ ++ beq nand_load ++#endif /* CONFIG_S3C2410_NAND_BOOT */ ++ ++relocate: /* relocate U-Boot to RAM */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ + beq done_relocate +@@ -188,10 +196,13 @@ + ldr pc, _done_relocate /* jump to relocated code */ + _done_relocate: + .word done_relocate +-done_relocate: +-#else /* NAND_BOOT */ +-relocate: +-copy_myself: ++ ++#ifdef CONFIG_S3C2410_NAND_BOOT ++nand_load: ++#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY) ++ bl cpu_init_crit ++#endif ++ + /* mov r10, lr */ + + @ reset NAND +@@ -275,7 +286,8 @@ + #endif + 1: b 1b + done_nand_read: +-#endif /* NAND_BOOT */ ++#endif /* CONFIG_S3C2410_NAND_BOOT */ ++done_relocate: + #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -26,14 +26,10 @@ + #ifndef __CONFIG_H + #define __CONFIG_H + +-#if defined(BUILD_FOR_RAM) +-/* If we want to start u-boot from inside RAM */ +-#define CONFIG_SKIP_LOWLEVEL_INIT 1 +-#else +-/* we want to start u-boot directly from within NAND flash */ ++/* we want to be able to start u-boot directly from within NAND flash */ ++#define CONFIG_LL_INIT_NAND_ONLY + #define CONFIG_S3C2410_NAND_BOOT 1 + #define CONFIG_S3C2410_NAND_SKIP_BAD 1 +-#endif + + #define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-reloc.patch b/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-reloc.patch new file mode 100644 index 0000000000..53a3e05c67 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/boot-from-ram-reloc.patch @@ -0,0 +1,62 @@ +This patch allows us to boot from anywhere in RAM. It mainly sets the stage +for later patches. The only real changes here is the better handling of already +cached code (e.g., if we were started by a previous instance of u-boot), and +that we drop CONFIG_SKIP_RELOCATE_UBOOT from neo1973.h + +cpu/arm920t/start.S: if not relocating, instead of going straight to + stack_setup, jump to done_relocate, which may perform other setup tasks +cpu/arm920t/start.S: after relocating, flush the cache and jump to the new code +include/configs/neo1973.h: remove CONFIG_SKIP_RELOCATE_UBOOT + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -171,7 +171,7 @@ relocate: /* relocate U-Boot to RAM + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ + cmp r0, r1 /* don't reloc during debug */ +- beq stack_setup ++ beq done_relocate + + ldr r2, _armboot_start + ldr r3, _bss_start +@@ -181,8 +181,14 @@ relocate: /* relocate U-Boot to RAM + copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ +- cmp r0, r2 /* until source end addreee [r2] */ ++ cmp r0, r2 /* until source end address [r2] */ + ble copy_loop ++ mov r0, #0 /* flush v3/v4 cache */ ++ mcr p15, 0, r0, c7, c7, 0 ++ ldr pc, _done_relocate /* jump to relocated code */ ++_done_relocate: ++ .word done_relocate ++done_relocate: + #else /* NAND_BOOT */ + relocate: + copy_myself: +@@ -270,7 +276,7 @@ notmatch: + 1: b 1b + done_nand_read: + #endif /* NAND_BOOT */ +-#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ ++#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ + stack_setup: +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -28,7 +28,6 @@ + + #if defined(BUILD_FOR_RAM) + /* If we want to start u-boot from inside RAM */ +-#define CONFIG_SKIP_RELOCATE_UBOOT 1 + #define CONFIG_SKIP_LOWLEVEL_INIT 1 + #else + /* we want to start u-boot directly from within NAND flash */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/boot-menu.patch b/packages/uboot/u-boot-mkimage-gta01-native/boot-menu.patch new file mode 100644 index 0000000000..352967ae06 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/boot-menu.patch @@ -0,0 +1,769 @@ +board/neo1973/bootmenu.c: simple configurable boot menu +board/neo1973/neo1973.c (neo1973_new_second): return 1 if a new second has + started since the last call +board/neo1973/neo1973.c (neo1973_on_key_pressed): return 1 if the $POWER key is + pressed +board/neo1973/neo1973.c (board_late_init): make use of neo1973_new_second and + neo1973_on_key_pressed +board/neo1973/neo1973.h: added function prototypes +u-boot/board/neo1973/neo1973.c (board_late_init): enter the boot menu when + "AUX" was pressed at least half the time +u-boot/board/neo1973/neo1973.c (board_late_init): minor code cleanup +u-boot/common/console.c, include/console.h: added "console_poll_hook" to be + called when waiting for console in put in "getc" and "tstc" +board/neo1973/neo1973.c (board_late_init): poll for the boot menu also on RAM + boot, reset, or unknown cause +board/neo1973/neo1973.c (board_late_init): don't look for the power key if + woken up by the charger +board/neo1973/neo1973.h, board/neo1973/neo1973.c, board/neo1973/bootmenu.c: + renamed neo1973_911_key_pressed to neo1973_aux_key_pressed + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/board/neo1973/common/bootmenu.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/bootmenu.c +@@ -0,0 +1,120 @@ ++/* ++ * bootmenu.c - Boot menu ++ * ++ * Copyright (C) 2006-2007 by OpenMoko, Inc. ++ * Written by Werner Almesberger <werner@openmoko.org> ++ * All Rights Reserved ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++ ++#include <common.h> ++#include <environment.h> ++#include <bootmenu.h> ++#include <asm/atomic.h> ++ ++#ifdef CONFIG_USBD_DFU ++#include "usbdcore.h" ++#include "usb_dfu.h" ++#endif ++ ++#include "neo1973.h" ++ ++ ++#define DEBOUNCE_LOOPS 1000 /* wild guess */ ++ ++ ++static int debounce(int (*fn)(void), int *last) ++{ ++ int on, i; ++ ++again: ++ on = fn(); ++ if (on != *last) ++ for (i = DEBOUNCE_LOOPS; i; i--) ++ if (on != fn()) ++ goto again; ++ *last = on; ++ return on; ++} ++ ++ ++static int aux_key(void *user) ++{ ++ static int last_aux = -1; ++ ++ return debounce(neo1973_aux_key_pressed, &last_aux); ++} ++ ++ ++static int on_key(void *user) ++{ ++ static int last_on = -1; ++ ++ return debounce(neo1973_on_key_pressed, &last_on); ++} ++ ++ ++static void factory_reset(void *user) ++{ ++ default_env(); ++ run_command("dynpart", 0); ++ run_command("bootd", 0); ++} ++ ++ ++static int seconds(void *user) ++{ ++ return neo1973_new_second(); ++} ++ ++ ++static int system_idle(void) ++{ ++#ifdef CONFIG_USBD_DFU ++ if (system_dfu_state) ++ return *system_dfu_state == DFU_STATE_appIDLE; ++#endif ++ return 1; ++} ++ ++ ++static void poweroff_if_idle(void *user) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if (system_idle()) ++ neo1973_poweroff(); ++ local_irq_restore(flags); ++} ++ ++ ++static struct bootmenu_setup bootmenu_setup = { ++ .next_key = aux_key, ++ .enter_key = on_key, ++ .seconds = seconds, ++ .idle_action = poweroff_if_idle, ++}; ++ ++ ++void neo1973_bootmenu(void) ++{ ++ bootmenu_add("Boot", NULL, "bootd"); ++ bootmenu_init(&bootmenu_setup); ++ bootmenu_add("Factory reset", factory_reset, NULL); ++ bootmenu(); ++} +Index: u-boot/board/neo1973/gta01/gta01.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/gta01.c ++++ u-boot/board/neo1973/gta01/gta01.c +@@ -229,10 +229,15 @@ int board_late_init(void) + extern unsigned char booted_from_nand; + unsigned char tmp; + char buf[32]; ++ int menu_vote = 0; /* <= 0: no, > 0: yes */ ++ int seconds = 0; + + /* Initialize the Power Management Unit with a safe register set */ + pcf50606_init(); + ++ /* if there's no other reason, must be regular reset */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; ++ + if (!booted_from_nand) + goto woken_by_reset; + +@@ -242,45 +247,41 @@ int board_late_init(void) + setenv("pcf50606_int1", buf); + + if (tmp & PCF50606_INT1_ALARM) { +- /* we've been woken up by RTC alarm or charger insert, boot */ ++ /* we've been woken up by RTC alarm, boot */ + neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; + goto continue_boot; + } + if (tmp & PCF50606_INT1_EXTONR) { ++ /* we've been woken up by charger insert */ + neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; + } + + if (tmp & PCF50606_INT1_ONKEYF) { +- int seconds = 0; +- neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; + /* we've been woken up by a falling edge of the onkey */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; ++ } + +- /* we can't just setenv(bootdelay,-1) because that would +- * accidentially become permanent if the user does saveenv */ +- if (neo1973_911_key_pressed()) +- nobootdelay = 1; +- +- while (1) { +- u_int8_t int1, oocs; +- +- oocs = pcf50606_reg_read(PCF50606_REG_OOCS); +- if (oocs & PFC50606_OOCS_ONKEY) +- break; +- +- int1 = pcf50606_reg_read(PCF50606_REG_INT1); +- if (int1 & PCF50606_INT1_SECOND) +- seconds++; +- +- if (seconds >= POWER_KEY_SECONDS) +- goto continue_boot; +- } +- /* Power off if minimum number of seconds not reached */ +- neo1973_poweroff(); ++ if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) { ++ /* if we still think it was only a charger insert, boot */ ++ goto continue_boot; + } + + woken_by_reset: +- /* if there's no other reason, must be regular reset */ +- neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; ++ ++ while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET || ++ neo1973_on_key_pressed()) { ++ if (neo1973_aux_key_pressed()) ++ menu_vote++; ++ else ++ menu_vote--; ++ ++ if (neo1973_new_second()) ++ seconds++; ++ if (seconds >= POWER_KEY_SECONDS) ++ goto continue_boot; ++ } ++ /* Power off if minimum number of seconds not reached */ ++ neo1973_poweroff(); + + continue_boot: + jbt6k74_init(); +@@ -304,6 +305,11 @@ continue_boot: + } + #endif + ++ if (menu_vote > 0) { ++ neo1973_bootmenu(); ++ nobootdelay = 1; ++ } ++ + return 0; + } + +@@ -369,7 +375,17 @@ void neo1973_vibrator(int on) + #endif + } + +-int neo1973_911_key_pressed(void) ++int neo1973_new_second(void) ++{ ++ return pcf50606_reg_read(PCF50606_REG_INT1) & PCF50606_INT1_SECOND; ++} ++ ++int neo1973_on_key_pressed(void) ++{ ++ return !(pcf50606_reg_read(PCF50606_REG_OOCS) & PFC50606_OOCS_ONKEY); ++} ++ ++int neo1973_aux_key_pressed(void) + { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + if (gpio->GPFDAT & (1 << 6)) +Index: u-boot/board/neo1973/gta01/Makefile +=================================================================== +--- u-boot.orig/board/neo1973/gta01/Makefile ++++ u-boot/board/neo1973/gta01/Makefile +@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk + + LIB = lib$(BOARD).a + +-OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ++OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o + SOBJS := ../common/lowlevel_init.o + + .PHONY: all +Index: u-boot/board/neo1973/common/neo1973.h +=================================================================== +--- u-boot.orig/board/neo1973/common/neo1973.h ++++ u-boot/board/neo1973/common/neo1973.h +@@ -29,4 +29,10 @@ int neo1973_911_key_pressed(void); + const char *neo1973_get_charge_status(void); + int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd); + ++int neo1973_new_second(void); ++int neo1973_on_key_pressed(void); ++int neo1973_aux_key_pressed(void); ++ ++void neo1973_bootmenu(void); ++ + #endif +Index: u-boot/common/console.c +=================================================================== +--- u-boot.orig/common/console.c ++++ u-boot/common/console.c +@@ -160,8 +160,12 @@ void fprintf (int file, const char *fmt, + + /** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/ + ++void (*console_poll_hook)(int activity); ++ + int getc (void) + { ++ while (console_poll_hook && !tstc()); ++ + if (gd->flags & GD_FLG_DEVINIT) { + /* Get from the standard input */ + return fgetc (stdin); +@@ -171,7 +175,7 @@ int getc (void) + return serial_getc (); + } + +-int tstc (void) ++static int do_tstc (void) + { + if (gd->flags & GD_FLG_DEVINIT) { + /* Test the standard input */ +@@ -182,6 +186,16 @@ int tstc (void) + return serial_tstc (); + } + ++int tstc (void) ++{ ++ int ret; ++ ++ ret = do_tstc(); ++ if (console_poll_hook) ++ console_poll_hook(ret); ++ return ret; ++} ++ + void putc (const char c) + { + #ifdef CONFIG_SILENT_CONSOLE +Index: u-boot/include/console.h +=================================================================== +--- u-boot.orig/include/console.h ++++ u-boot/include/console.h +@@ -33,6 +33,8 @@ + extern device_t *stdio_devices[] ; + extern char *stdio_names[MAX_FILES] ; + ++extern void (*console_poll_hook)(int activity); ++ + int console_realloc(int top); + + #endif +Index: u-boot/common/Makefile +=================================================================== +--- u-boot.orig/common/Makefile ++++ u-boot/common/Makefile +@@ -50,7 +50,8 @@ COBJS = main.o ACEX1K.o altera.o bedbug. + memsize.o miiphybb.o miiphyutil.o \ + s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \ + usb.o usb_kbd.o usb_storage.o \ +- virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o ++ virtex2.o xilinx.o crc16.o xyzModem.o cmd_mac.o cmd_mfsl.o \ ++ bootmenu.o + + SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS)) +Index: u-boot/common/bootmenu.c +=================================================================== +--- /dev/null ++++ u-boot/common/bootmenu.c +@@ -0,0 +1,311 @@ ++/* ++ * bootmenu.c - Boot menu ++ * ++ * Copyright (C) 2006-2007 by OpenMoko, Inc. ++ * Written by Werner Almesberger <werner@openmoko.org> ++ * All Rights Reserved ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++ ++#include <common.h> ++ ++#ifdef CFG_BOOTMENU ++ ++#include <malloc.h> ++#include <devices.h> ++#include <console.h> ++#include <bootmenu.h> ++ ++ ++extern const char version_string[]; ++ ++ ++#define ANSI_CLEAR "\e[2J" ++#define ANSI_REVERSE "\e[7m" ++#define ANSI_NORMAL "\e[m" ++#define ANSI_GOTOYX "\e[%d;%dH" ++ ++/* ++ * MIN_BOOT_MENU_TIMEOUT ensures that users can't by accident set the timeout ++ * unusably short. ++ */ ++#define MIN_BOOT_MENU_TIMEOUT 10 /* 10 seconds */ ++#define BOOT_MENU_TIMEOUT 60 /* 60 seconds */ ++#define AFTER_COMMAND_WAIT 3 /* wait (2,3] after running commands */ ++#define MAX_MENU_ITEMS 10 /* cut off after that many */ ++ ++#define TOP_ROW 2 ++#define MENU_0_ROW (TOP_ROW+5) ++ ++ ++struct option { ++ const char *label; ++ void (*fn)(void *user); /* run_command if NULL */ ++ void *user; ++}; ++ ++ ++static const struct bootmenu_setup *setup; ++static struct option options[MAX_MENU_ITEMS]; ++static int num_options = 0; ++static int max_width = 0; ++ ++static device_t *bm_con; ++ ++ ++static void bm_printf(const char *fmt, ...) ++{ ++ va_list args; ++ char printbuffer[CFG_PBSIZE]; ++ ++ va_start(args, fmt); ++ vsprintf(printbuffer, fmt, args); ++ va_end(args); ++ ++ bm_con->puts(printbuffer); ++} ++ ++ ++static char *get_option(int n) ++{ ++ char name[] = "menu_XX"; ++ ++ sprintf(name+5, "%d", n); ++ return getenv(name); ++} ++ ++ ++static void print_option(const struct option *option, int reverse) ++{ ++ int n = option-options; ++ ++ bm_printf(ANSI_GOTOYX, MENU_0_ROW+n, 1); ++ if (reverse) ++ bm_printf(ANSI_REVERSE); ++ bm_printf(" %-*s ", max_width, option->label); ++ if (reverse) ++ bm_printf(ANSI_NORMAL); ++} ++ ++ ++static int get_var_positive_int(char *var, int default_value) ++{ ++ const char *s; ++ char *end; ++ int n; ++ ++ s = getenv(var); ++ if (!s) ++ return default_value; ++ n = simple_strtoul(s, &end, 0); ++ if (!*s || *end || n < 1) ++ return default_value; ++ return n; ++} ++ ++ ++static void show_bootmenu(void) ++{ ++ const struct option *option; ++ ++ bm_printf(ANSI_CLEAR ANSI_GOTOYX "%s", TOP_ROW, 1, version_string); ++ bm_printf(ANSI_GOTOYX "*** BOOT MENU ***", TOP_ROW+3, 1); ++ bm_printf(ANSI_GOTOYX, MENU_0_ROW, 1); ++ ++ for (option = options; option != options+num_options; option++) ++ print_option(option, option == options); ++ ++ bm_printf("\n\nPress [AUX] to select, [POWER] to execute.\n"); ++} ++ ++ ++static void redirect_console(int grab) ++{ ++ static device_t *orig_stdout, *orig_stderr; ++ ++ if (grab) { ++ orig_stdout = stdio_devices[stdout]; ++ orig_stderr = stdio_devices[stderr]; ++ stdio_devices[stdout] = bm_con; ++ stdio_devices[stderr] = bm_con; ++ } ++ else { ++ /* ++ * Make this conditional, because the command may also change ++ * the console. ++ */ ++ if (stdio_devices[stdout] == bm_con) ++ stdio_devices[stdout] = orig_stdout; ++ if (stdio_devices[stderr] == bm_con) ++ stdio_devices[stderr] = orig_stderr; ++ } ++} ++ ++ ++static void do_option(const struct option *option) ++{ ++ int seconds, aux; ++ ++ bm_printf(ANSI_CLEAR ANSI_GOTOYX, 1, 1); ++ redirect_console(1); ++ ++ if (option->fn) ++ option->fn(option->user); ++ else ++ run_command(option->user, 0); ++ ++ redirect_console(0); ++ seconds = get_var_positive_int("after_command_wait", ++ AFTER_COMMAND_WAIT); ++ if (seconds) ++ bm_printf("\nPress [AUX] to %s.", ++ option ? "return to boot menu" : "power off"); ++ aux = 1; /* require up-down transition */ ++ while (seconds) { ++ int tmp; ++ ++ tmp = setup->next_key(setup->user); ++ if (tmp && !aux) ++ break; ++ aux = tmp; ++ if (setup->seconds(setup->user)) ++ seconds--; ++ } ++ if (!option) ++ setup->idle_action(setup->idle_action); ++ show_bootmenu(); ++} ++ ++ ++static void bootmenu_hook(int activity) ++{ ++ static int aux = 1, on = 1; ++ static const struct option *option = options; ++ static int seconds = 0; ++ int tmp; ++ ++ if (activity) ++ seconds = 0; ++ tmp = setup->next_key(setup->user); ++ if (tmp && !aux) { ++ print_option(option, 0); ++ option++; ++ if (option == options+num_options) ++ option = options; ++ print_option(option, 1); ++ seconds = 0; ++ } ++ aux = tmp; ++ tmp = setup->enter_key(setup->user); ++ if (tmp && !on) { ++ do_option(option); ++ option = options; ++ seconds = 0; ++ } ++ on = tmp; ++ if (setup->seconds(setup->user)) { ++ int timeout; ++ ++ timeout = get_var_positive_int("boot_menu_timeout", ++ BOOT_MENU_TIMEOUT); ++ if (timeout < MIN_BOOT_MENU_TIMEOUT) ++ timeout = MIN_BOOT_MENU_TIMEOUT; ++ if (++seconds > timeout) { ++ setup->idle_action(setup->idle_action); ++ seconds = 0; ++ } ++ } ++} ++ ++ ++static device_t *find_console(const char *name) ++{ ++ int i; ++ ++ for (i = 1; i != ListNumItems(devlist); i++) { ++ device_t *dev = ListGetPtrToItem(devlist, i); ++ ++ if (!strcmp(name, dev->name)) ++ if (dev->flags & DEV_FLAGS_OUTPUT) ++ return dev; ++ } ++ return NULL; ++} ++ ++ ++void bootmenu_add(const char *label, void (*fn)(void *user), void *user) ++{ ++ int len; ++ ++ options[num_options].label = label; ++ options[num_options].fn = fn; ++ options[num_options].user = user; ++ num_options++; ++ ++ len = strlen(label); ++ if (len > max_width) ++ max_width = len; ++} ++ ++ ++void bootmenu_init(struct bootmenu_setup *__setup) ++{ ++ int n; ++ ++ setup = __setup; ++ for (n = 1; n != MAX_MENU_ITEMS+1; n++) { ++ const char *spec, *colon; ++ ++ spec = get_option(n); ++ if (!spec) ++ continue; ++ colon = strchr(spec, ':'); ++ if (!colon) ++ bootmenu_add(spec, NULL, (char *) spec); ++ else { ++ char *label; ++ int len = colon-spec; ++ ++ label = malloc(len+1); ++ if (!label) ++ return; ++ memcpy(label, spec, len); ++ label[len] = 0; ++ bootmenu_add(label, NULL, (char *) colon+1); ++ } ++ } ++} ++ ++ ++void bootmenu(void) ++{ ++ bm_con = find_console("vga"); ++ if (bm_con && bm_con->start && bm_con->start() < 0) ++ bm_con = NULL; ++ if (!bm_con) ++ bm_con = stdio_devices[stdout]; ++ if (!bm_con) ++ return; ++#if 0 ++ console_assign(stdout, "vga"); ++ console_assign(stderr, "vga"); ++#endif ++ show_bootmenu(); ++ console_poll_hook = bootmenu_hook; ++} ++ ++#endif /* CFG_BOOTMENU */ +Index: u-boot/include/bootmenu.h +=================================================================== +--- /dev/null ++++ u-boot/include/bootmenu.h +@@ -0,0 +1,71 @@ ++/* ++ * bootmenu.h - Boot menu ++ * ++ * Copyright (C) 2006-2007 by OpenMoko, Inc. ++ * Written by Werner Almesberger <werner@openmoko.org> ++ * All Rights Reserved ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ */ ++ ++#ifndef BOOTMENU_H ++#define BOOTMENU_H ++ ++#define MIN_BOOT_MENU_TIMEOUT 10 /* 10 seconds */ ++#define BOOT_MENU_TIMEOUT 60 /* 60 seconds */ ++#define AFTER_COMMAND_WAIT 3 /* wait (2,3] after running commands */ ++#define MAX_MENU_ITEMS 10 /* cut off after that many */ ++ ++ ++struct bootmenu_setup { ++ /* non-zero while the "next" key is being pressed */ ++ int (*next_key)(void *user); ++ ++ /* non-zero while the "enter" key is being pressed */ ++ int (*enter_key)(void *user); ++ ++ /* return the number of seconds that have passed since the last call ++ to "seconds". It's okay to limit the range to [0, 1]. */ ++ int (*seconds)(void *user); ++ ++ /* action to take if the boot menu times out */ ++ void (*idle_action)(void *user); ++ ++ /* user-specific data, passes "as is" to the functions above */ ++ void *user; ++}; ++ ++ ++/* ++ * Initialize the menu from the environment. ++ */ ++ ++void bootmenu_init(struct bootmenu_setup *setup); ++ ++/* ++ * To add entries on top of the boot menu, call bootmenu_add before ++ * bootmenu_init. To add entries at the end, call it after bootmenu_init. ++ * If "fn" is NULL, the command specified in "user" is executed. ++ */ ++ ++void bootmenu_add(const char *label, void (*fn)(void *user), void *user); ++ ++/* ++ * Run the boot menu. ++ */ ++ ++void bootmenu(void); ++ ++#endif /* !BOOTMENU_H */ +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -160,6 +160,8 @@ + /* valid baudrates */ + #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + ++#define CFG_BOOTMENU ++ + /*----------------------------------------------------------------------- + * Stack sizes + * diff --git a/packages/uboot/u-boot-mkimage-gta01-native/cmd-unzip.patch b/packages/uboot/u-boot-mkimage-gta01-native/cmd-unzip.patch new file mode 100644 index 0000000000..ee4c1984fc --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/cmd-unzip.patch @@ -0,0 +1,58 @@ +common/cmd_mem.c: new command "unzip srcaddr dstaddr [dstsize]" to unzip from + memory to memory, and option CONFIG_UNZIP to enable it + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/common/cmd_mem.c +=================================================================== +--- u-boot.orig/common/cmd_mem.c ++++ u-boot/common/cmd_mem.c +@@ -1148,6 +1148,34 @@ int do_mem_crc (cmd_tbl_t *cmdtp, int fl + } + #endif /* CONFIG_CRC32_VERIFY */ + ++ ++#ifdef CONFIG_UNZIP ++int gunzip (void *, int, unsigned char *, unsigned long *); ++ ++int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ unsigned long src, dst; ++ unsigned long src_len = ~0UL, dst_len = ~0UL; ++ int err; ++ ++ switch (argc) { ++ case 4: ++ dst_len = simple_strtoul(argv[3], NULL, 16); ++ /* fall through */ ++ case 3: ++ src = simple_strtoul(argv[1], NULL, 16); ++ dst = simple_strtoul(argv[2], NULL, 16); ++ break; ++ default: ++ printf ("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ ++ return !!gunzip((void *) dst, dst_len, (void *) src, &src_len); ++} ++#endif /* CONFIG_UNZIP */ ++ ++ + /**************************************************/ + #if (CONFIG_COMMANDS & CFG_CMD_MEMORY) + U_BOOT_CMD( +@@ -1251,5 +1279,13 @@ U_BOOT_CMD( + ); + #endif /* CONFIG_MX_CYCLIC */ + ++#ifdef CONFIG_UNZIP ++U_BOOT_CMD( ++ unzip, 4, 1, do_unzip, ++ "unzip - unzip a memory region\n", ++ "srcaddr dstaddr [dstsize]\n" ++); ++#endif /* CONFIG_UNZIP */ ++ + #endif + #endif /* CFG_CMD_MEMORY */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/console-ansi.patch b/packages/uboot/u-boot-mkimage-gta01-native/console-ansi.patch new file mode 100644 index 0000000000..2ac5b75dee --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/console-ansi.patch @@ -0,0 +1,127 @@ +drivers/cfb_console.c: added processing of ANSI escape sequences \e[2J, \e[m, + \e[7m, and \e[row;colH +drivers/cfb_console.c (video_putc): make \r return to the beginning of the line + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/drivers/cfb_console.c +=================================================================== +--- u-boot.orig/drivers/cfb_console.c ++++ u-boot/drivers/cfb_console.c +@@ -181,6 +181,7 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the + + #include <version.h> + #include <linux/types.h> ++#include <linux/ctype.h> + #include <devices.h> + #include <video_font.h> + #ifdef CFG_CMD_DATE +@@ -676,10 +677,96 @@ static void console_newline (void) + + /*****************************************************************************/ + ++static enum { ++ CS_NORMAL = 0, ++ CS_ESC, ++ CS_NUM1, ++ CS_NUM2, ++} state = 0; ++ ++static int num1, num2; ++ ++ ++static void swap_drawing_colors(void) ++{ ++ eorx = fgx; ++ fgx = bgx; ++ bgx = eorx; ++ eorx = fgx ^ bgx; ++} ++ ++ ++static void process_sequence(char c) ++{ ++ static int inverted = 0; ++ int i, inv; ++ ++ switch (c) { ++ case 'J': ++ /* assume num1 == 2 */ ++ for (i = 0; i != CONSOLE_ROWS; i++) ++ console_scrollup(); ++ break; ++ case 'H': ++ if (num1 > CONSOLE_ROWS || num2 > CONSOLE_COLS) ++ break; ++ console_col = num2 ? num2-1 : 0; ++ console_row = num1 ? num1-1 : 0; ++ break; ++ case 'm': ++ inv = num1 == 7; ++ if (num1 && !inv) ++ break; ++ if (inverted != inv) ++ swap_drawing_colors(); ++ inverted = inv; ++ break; ++ } ++} ++ ++ ++static void escape_sequence(char c) ++{ ++ switch (state) { ++ case CS_ESC: ++ state = c == '[' ? CS_NUM1 : CS_NORMAL; ++ num1 = num2 = 0; ++ break; ++ case CS_NUM1: ++ if (isdigit(c)) ++ num1 = num1*10+c-'0'; ++ else if (c == ';') ++ state = CS_NUM2; ++ else { ++ process_sequence(c); ++ state = CS_NORMAL; ++ } ++ break; ++ case CS_NUM2: ++ if (isdigit(c)) ++ num2 = num2*10+c-'0'; ++ else { ++ process_sequence(c); ++ state = CS_NORMAL; ++ } ++ default: ++ /* can't happen */; ++ } ++} ++ ++ + void video_putc (const char c) + { ++ if (state) { ++ escape_sequence(c); ++ CURSOR_SET; ++ return; ++ } ++ + switch (c) { +- case 13: /* ignore */ ++ case 13: /* return to beginning of line */ ++ CURSOR_OFF; ++ console_col = 0; + break; + + case '\n': /* next line */ +@@ -698,6 +785,10 @@ void video_putc (const char c) + console_back (); + break; + ++ case '\e': ++ state = CS_ESC; ++ break; ++ + default: /* draw the char */ + video_putchar (console_col * VIDEO_FONT_WIDTH, + console_row * VIDEO_FONT_HEIGHT, diff --git a/packages/uboot/u-boot-mkimage-gta01-native/default-env.patch b/packages/uboot/u-boot-mkimage-gta01-native/default-env.patch new file mode 100644 index 0000000000..b9ae4f29fe --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/default-env.patch @@ -0,0 +1,101 @@ +common/env_common.c (default_env): new function that resets the environment to + the default value +common/env_common.c (env_relocate): use default_env instead of own copy +common/env_nand.c (env_relocate_spec): use default_env instead of own copy +include/environment.h: added default_env prototype + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/common/env_common.c +=================================================================== +--- u-boot.orig/common/env_common.c ++++ u-boot/common/env_common.c +@@ -202,6 +202,25 @@ uchar *env_get_addr (int index) + } + } + ++void default_env(void) ++{ ++ if (sizeof(default_environment) > ENV_SIZE) ++ { ++ puts ("*** Error - default environment is too large\n\n"); ++ return; ++ } ++ ++ memset (env_ptr, 0, sizeof(env_t)); ++ memcpy (env_ptr->data, ++ default_environment, ++ sizeof(default_environment)); ++#ifdef CFG_REDUNDAND_ENVIRONMENT ++ env_ptr->flags = 0xFF; ++#endif ++ env_crc_update (); ++ gd->env_valid = 1; ++} ++ + void env_relocate (void) + { + DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__, +@@ -245,23 +264,8 @@ void env_relocate (void) + gd->env_valid = 0; + #endif + +- if (gd->env_valid == 0) { +- if (sizeof(default_environment) > ENV_SIZE) +- { +- puts ("*** Error - default environment is too large\n\n"); +- return; +- } +- +- memset (env_ptr, 0, sizeof(env_t)); +- memcpy (env_ptr->data, +- default_environment, +- sizeof(default_environment)); +-#ifdef CFG_REDUNDAND_ENVIRONMENT +- env_ptr->flags = 0xFF; +-#endif +- env_crc_update (); +- gd->env_valid = 1; +- } ++ if (gd->env_valid == 0) ++ default_env(); + else { + env_relocate_spec (); + } +Index: u-boot/common/env_nand.c +=================================================================== +--- u-boot.orig/common/env_nand.c ++++ u-boot/common/env_nand.c +@@ -313,19 +313,7 @@ void env_relocate_spec (void) + static void use_default() + { + puts ("*** Warning - bad CRC or NAND, using default environment\n\n"); +- +- if (default_environment_size > CFG_ENV_SIZE){ +- puts ("*** Error - default environment is too large\n\n"); +- return; +- } +- +- memset (env_ptr, 0, sizeof(env_t)); +- memcpy (env_ptr->data, +- default_environment, +- default_environment_size); +- env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE); +- gd->env_valid = 1; +- ++ default_env(); + } + #endif + +Index: u-boot/include/environment.h +=================================================================== +--- u-boot.orig/include/environment.h ++++ u-boot/include/environment.h +@@ -107,4 +107,7 @@ typedef struct environment_s { + unsigned char data[ENV_SIZE]; /* Environment data */ + } env_t; + ++ ++void default_env(void); ++ + #endif /* _ENVIRONMENT_H_ */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/dontask.patch b/packages/uboot/u-boot-mkimage-gta01-native/dontask.patch new file mode 100644 index 0000000000..23d4b13626 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/dontask.patch @@ -0,0 +1,22 @@ +common/cmd_nand.c (yes): if the environment variable "dontask" is set to "y" or + "Y", non-interactively assume the answer was "yes". In all other cases, ask. + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/common/cmd_nand.c +=================================================================== +--- u-boot.orig/common/cmd_nand.c ++++ u-boot/common/cmd_nand.c +@@ -165,8 +165,12 @@ out: + + static int yes(void) + { ++ char *s; + char c; + ++ s = getenv("dontask"); ++ if (s && (s[0] =='y' || s[0] == 'Y') && !s[1]) ++ return 1; + c = getc(); + if (c != 'y' && c != 'Y') + return 0; diff --git a/packages/uboot/u-boot-mkimage-gta01-native/dynenv-harden.patch b/packages/uboot/u-boot-mkimage-gta01-native/dynenv-harden.patch new file mode 100644 index 0000000000..cf12352553 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/dynenv-harden.patch @@ -0,0 +1,139 @@ +common/cmd_nand.c: globalized arg_off_size +include/util.h: new header to convenience functions, such as arg_off_size +common/cmd_dynenv.c (do_dynenv): use arg_off_size to sanity-check offset and to + allow use of partition name +common/cmd_dynenv.c (do_dynenv): indicate in no uncertain terms when an update + would not work due to Flash bits already cleared +common/cmd_dynenv.c (do_dynenv): update CFG_ENV_OFFSET after successful "dynenv + set", so that we can write the new environment without having to reboot + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/common/cmd_nand.c +=================================================================== +--- u-boot.orig/common/cmd_nand.c ++++ u-boot/common/cmd_nand.c +@@ -100,7 +100,7 @@ static inline int str2long(char *p, ulon + return (*p != '\0' && *endptr == '\0') ? 1 : 0; + } + +-static int ++int + arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size) + { + int idx = nand_curr_device; +Index: u-boot/include/util.h +=================================================================== +--- /dev/null ++++ u-boot/include/util.h +@@ -0,0 +1,33 @@ ++/* ++ * util.h - Convenience functions ++ * ++ * (C) Copyright 2006-2007 OpenMoko, Inc. ++ * Author: Werner Almesberger <werner@openmoko.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef UTIL_H ++#define UTIL_H ++ ++#include "nand.h" ++ ++ ++/* common/cmd_nand.c */ ++int arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ++ ulong *size); ++ ++#endif /* UTIL_H */ +Index: u-boot/common/cmd_dynenv.c +=================================================================== +--- u-boot.orig/common/cmd_dynenv.c ++++ u-boot/common/cmd_dynenv.c +@@ -23,6 +23,7 @@ + #include <malloc.h> + #include <environment.h> + #include <nand.h> ++#include <util.h> + #include <asm/errno.h> + + #if defined(CFG_ENV_OFFSET_OOB) +@@ -39,8 +40,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag + if (!buf) + return -ENOMEM; + ++ ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); + if (!strcmp(cmd, "get")) { +- ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); + + if (buf[0] == 'E' && buf[1] == 'N' && + buf[2] == 'V' && buf[3] == '0') +@@ -49,7 +50,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag + printf("No dynamic environment marker in OOB block 0\n"); + + } else if (!strcmp(cmd, "set")) { +- unsigned long addr; ++ unsigned long addr, dummy; ++ + if (argc < 3) + goto usage; + +@@ -57,7 +59,23 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag + buf[1] = 'N'; + buf[2] = 'V'; + buf[3] = '0'; +- addr = simple_strtoul(argv[2], NULL, 16); ++ ++ if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy) < 0) { ++ printf("Offset or partition name expected\n"); ++ goto fail; ++ } ++ if (!ret) { ++ uint8_t tmp[4]; ++ int i; ++ ++ memcpy(&tmp, &addr, 4); ++ for (i = 0; i != 4; i++) ++ if (tmp[i] & ~buf[i+4]) { ++ printf("ERROR: erase OOB block to " ++ "write this value\n"); ++ goto fail; ++ } ++ } + memcpy(buf+4, &addr, 4); + + printf("%02x %02x %02x %02x - %02x %02x %02x %02x\n", +@@ -65,6 +83,8 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag + buf[4], buf[5], buf[6], buf[7]); + + ret = mtd->write_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); ++ if (!ret) ++ CFG_ENV_OFFSET = addr; + } else + goto usage; + +@@ -72,8 +92,9 @@ int do_dynenv(cmd_tbl_t *cmdtp, int flag + return ret; + + usage: +- free(buf); + printf("Usage:\n%s\n", cmdtp->usage); ++fail: ++ free(buf); + return 1; + } + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/early-powerdown.patch b/packages/uboot/u-boot-mkimage-gta01-native/early-powerdown.patch new file mode 100644 index 0000000000..7326c2daa6 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/early-powerdown.patch @@ -0,0 +1,40 @@ +Index: u-boot/board/neo1973/neo1973.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/gta01.c ++++ u-boot/board/neo1973/gta01/gta01.c +@@ -68,8 +68,12 @@ DECLARE_GLOBAL_DATA_PTR; + #define U_M_PDIV 0x2 + #define U_M_SDIV 0x3 + ++#define VALID_WAKEUP_REASONS (PCF50606_INT1_ONKEYF | PCF50606_INT1_ALARM) ++ + unsigned int neo1973_wakeup_cause; + extern int nobootdelay; ++static unsigned char int1; ++ + + static inline void delay (unsigned long loops) + { +@@ -179,6 +183,13 @@ int board_init (void) + #error Please define GTA01 version + #endif + ++ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); ++ int1 = pcf50606_reg_read(PCF50606_REG_INT1); ++ if (!(int1 & VALID_WAKEUP_REASONS) && !neo1973_aux_key_pressed()) { ++ pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY); ++ while (1); ++ } ++ + /* arch number of SMDK2410-Board */ + gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01; + +@@ -200,7 +211,7 @@ int board_late_init(void) + pcf50606_init(); + + /* obtain wake-up reason, save INT1 in environment */ +- tmp = pcf50606_reg_read(PCF50606_REG_INT1); ++ tmp = int1; //pcf50606_reg_read(PCF50606_REG_INT1); + sprintf(buf, "0x%02x", tmp); + setenv("pcf50606_int1", buf); + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/enable-splash-bmp.patch b/packages/uboot/u-boot-mkimage-gta01-native/enable-splash-bmp.patch new file mode 100644 index 0000000000..dcb721c8d3 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/enable-splash-bmp.patch @@ -0,0 +1,56 @@ +drivers/cfb_console.c: include asm/byteorder.h for le32_to_cpu and friends + [ shouldn't someone else have found this long ago ? ] +include/configs/neo1973.h (CONFIG_COMMANDS): add CFG_CMD_BMP +include/configs/neo1973.h: enable splash screen and BMP support +include/configs/neo1973.h: remove #if 1 ... #endif around video definitions + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/drivers/cfb_console.c +=================================================================== +--- u-boot.orig/drivers/cfb_console.c ++++ u-boot/drivers/cfb_console.c +@@ -191,6 +191,7 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the + #if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN) + #include <watchdog.h> + #include <bmp_layout.h> ++#include <asm/byteorder.h> + #endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */ + + /*****************************************************************************/ +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -86,6 +86,7 @@ + /* CFG_CMD_IRQ | */ \ + CFG_CMD_BOOTD | \ + CFG_CMD_CONSOLE | \ ++ CFG_CMD_BMP | \ + CFG_CMD_ASKENV | \ + CFG_CMD_RUN | \ + CFG_CMD_ECHO | \ +@@ -244,19 +245,21 @@ + /* we have a board_late_init() function */ + #define BOARD_LATE_INIT 1 + +-#if 1 + #define CONFIG_VIDEO + #define CONFIG_VIDEO_S3C2410 + #define CONFIG_CFB_CONSOLE + #define CONFIG_VIDEO_LOGO ++#define CONFIG_SPLASH_SCREEN ++#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ ++#define CONFIG_VIDEO_BMP_GZIP + #define CONFIG_VGA_AS_SINGLE_DEVICE ++#define CONFIG_UNZIP + + #define VIDEO_KBD_INIT_FCT 0 + #define VIDEO_TSTC_FCT serial_tstc + #define VIDEO_GETC_FCT serial_getc + + #define LCD_VIDEO_ADDR 0x33d00000 +-#endif + + #define CONFIG_S3C2410_NAND_BBT 1 + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/env_nand_oob.patch b/packages/uboot/u-boot-mkimage-gta01-native/env_nand_oob.patch new file mode 100644 index 0000000000..5a2dd61461 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/env_nand_oob.patch @@ -0,0 +1,198 @@ +This patch adds support for CFG_ENV_OFFSET_PATCHED and +CFG_ENV_OFFSET_OOB. + +Both try to solve the problem of fixing the environment location in NAND flash +at compile time, which doesn't work well if the NAND flash has a bad block at +exactly that location. + +CFG_ENV_OFFSET_PATCHED puts the environment in a global variable. You can then +use the linker script to put that variable to a fixed location in the u-boot +image. Then you can use bianry patching during the production flash process. + +The idea of CFG_ENV_OFFSET_OOB is to store the environment offset in the NAND +OOB data of block 0. We can do this in case the vendor makes a guarantee that +block 0 never is a factory-default bad block. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/common/env_nand.c +=================================================================== +--- u-boot.orig/common/env_nand.c ++++ u-boot/common/env_nand.c +@@ -271,6 +271,33 @@ + ulong total; + int ret; + ++#if defined(CFG_ENV_OFFSET_OOB) ++ struct mtd_info *mtd = &nand_info[0]; ++ struct nand_chip *this = mtd->priv; ++ int buf_len; ++ uint8_t *buf; ++ ++ buf_len = (1 << this->bbt_erase_shift); ++ buf_len += (buf_len >> this->page_shift) * mtd->oobsize; ++ buf = malloc(buf_len); ++ if (!buf) ++ return; ++ ++ nand_read_raw(mtd, buf, 0, mtd->oobblock, mtd->oobsize); ++ if (buf[mtd->oobblock + 8 + 0] == 'E' && ++ buf[mtd->oobblock + 8 + 1] == 'N' && ++ buf[mtd->oobblock + 8 + 2] == 'V' && ++ buf[mtd->oobblock + 8 + 3] == '0') { ++ CFG_ENV_OFFSET = *((unsigned long *) &buf[mtd->oobblock + 8 + 4]); ++ /* fall through to the normal environment reading code below */ ++ free(buf); ++ puts("Found Environment offset in OOB..\n"); ++ } else { ++ free(buf); ++ return use_default(); ++ } ++#endif ++ + total = CFG_ENV_SIZE; + ret = nand_read(&nand_info[0], CFG_ENV_OFFSET, &total, (u_char*)env_ptr); + if (ret || total != CFG_ENV_SIZE) +Index: u-boot/common/environment.c +=================================================================== +--- u-boot.orig/common/environment.c ++++ u-boot/common/environment.c +@@ -29,6 +29,12 @@ + #undef __ASSEMBLY__ + #include <environment.h> + ++#if defined(CFG_ENV_OFFSET_PATCHED) ++unsigned long env_offset = CFG_ENV_OFFSET_PATCHED; ++#elif defined(CFG_ENV_OFFSET_OOB) ++unsigned long env_offset = CFG_ENV_OFFSET_OOB; ++#endif ++ + /* + * Handle HOSTS that have prepended + * crap on symbol names, not TARGETS. +Index: u-boot/include/environment.h +=================================================================== +--- u-boot.orig/include/environment.h ++++ u-boot/include/environment.h +@@ -70,6 +70,10 @@ + #endif /* CFG_ENV_IS_IN_FLASH */ + + #if defined(CFG_ENV_IS_IN_NAND) ++#if defined(CFG_ENV_OFFSET_PATCHED) || defined(CFG_ENV_OFFSET_OOB) ++extern unsigned long env_offset; ++#define CFG_ENV_OFFSET env_offset ++#else + # ifndef CFG_ENV_OFFSET + # error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND" + # endif +@@ -82,6 +86,7 @@ + # ifdef CFG_ENV_IS_EMBEDDED + # define ENV_IS_EMBEDDED 1 + # endif ++#endif /* CFG_ENV_NAND_PATCHED */ + #endif /* CFG_ENV_IS_IN_NAND */ + + +Index: u-boot/common/Makefile +=================================================================== +--- u-boot.orig/common/Makefile ++++ u-boot/common/Makefile +@@ -31,7 +31,7 @@ + cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \ + cmd_cache.o cmd_console.o \ + cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \ +- cmd_eeprom.o cmd_elf.o cmd_ext2.o \ ++ cmd_dynenv.o cmd_eeprom.o cmd_elf.o cmd_ext2.o \ + cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ + cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \ + cmd_load.o cmd_log.o \ +Index: u-boot/common/cmd_dynenv.c +=================================================================== +--- /dev/null ++++ u-boot/common/cmd_dynenv.c +@@ -0,0 +1,85 @@ ++/* ++ * (C) Copyright 2006-2007 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <command.h> ++#include <malloc.h> ++#include <environment.h> ++#include <nand.h> ++#include <asm/errno.h> ++ ++#if defined(CFG_ENV_OFFSET_OOB) ++ ++int do_dynenv(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ struct mtd_info *mtd = &nand_info[0]; ++ int ret, size = 8; ++ uint8_t *buf; ++ ++ char *cmd = argv[1]; ++ ++ buf = malloc(mtd->oobsize); ++ if (!buf) ++ return -ENOMEM; ++ ++ if (!strcmp(cmd, "get")) { ++ ret = mtd->read_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); ++ ++ if (buf[0] == 'E' && buf[1] == 'N' && ++ buf[2] == 'V' && buf[3] == '0') ++ printf("0x%08x\n", *((u_int32_t *) &buf[4])); ++ else ++ printf("No dynamic environment marker in OOB block 0\n"); ++ ++ } else if (!strcmp(cmd, "set")) { ++ unsigned long addr; ++ if (argc < 3) ++ goto usage; ++ ++ buf[0] = 'E'; ++ buf[1] = 'N'; ++ buf[2] = 'V'; ++ buf[3] = '0'; ++ addr = simple_strtoul(argv[2], NULL, 16); ++ memcpy(buf+4, &addr, 4); ++ ++ printf("%02x %02x %02x %02x - %02x %02x %02x %02x\n", ++ buf[0], buf[1], buf[2], buf[3], ++ buf[4], buf[5], buf[6], buf[7]); ++ ++ ret = mtd->write_oob(mtd, 8, size, (size_t *) &size, (u_char *) buf); ++ } else ++ goto usage; ++ ++ free(buf); ++ return ret; ++ ++usage: ++ free(buf); ++ printf("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++} ++ ++U_BOOT_CMD(dynenv, 3, 1, do_dynenv, ++ "dynenv - dynamically placed (NAND) environment\n", ++ "dynenv set off - set enviromnent offset\n" ++ "dynenv get - get environment offset\n"); ++ ++#endif /* CFG_ENV_OFFSET_OOB */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/ext2load_hex.patch b/packages/uboot/u-boot-mkimage-gta01-native/ext2load_hex.patch new file mode 100644 index 0000000000..ff8e9cd6fc --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/ext2load_hex.patch @@ -0,0 +1,17 @@ +This patch adds the hex-printing of the file size read by 'ext2load' + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot.git/common/cmd_ext2.c +=================================================================== +--- u-boot.git.orig/common/cmd_ext2.c 2007-01-02 18:26:17.000000000 +0100 ++++ u-boot.git/common/cmd_ext2.c 2007-01-02 18:26:27.000000000 +0100 +@@ -279,7 +279,7 @@ + /* Loading ok, update default load address */ + load_addr = addr; + +- printf ("\n%ld bytes read\n", filelen); ++ printf ("\n%ld (0x%lx) bytes read\n", filelen, filelen); + sprintf(buf, "%lX", filelen); + setenv("filesize", buf); + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/lowlevel_foo.patch b/packages/uboot/u-boot-mkimage-gta01-native/lowlevel_foo.patch new file mode 100644 index 0000000000..715c46ed81 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/lowlevel_foo.patch @@ -0,0 +1,229 @@ +board/neo1973/lowlevel_foo.S: http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.S +board/neo1973/lowlevel_foo.lds: http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.lds +board/neo1973/Makefile: added building of lowlevel_foo.bin (based on + http://people.openmoko.org/laforge/tmp/bbt-20070206/lowlevel_foo.build.sh) + +Index: u-boot/board/neo1973/common/lowlevel_foo.S +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/lowlevel_foo.S +@@ -0,0 +1,82 @@ ++ ++_start: ++ b reset ++undefvec: ++ b undefvec ++swivec: ++ b swivec ++pabtvec: ++ b pabtvec ++dabtvec: ++ b dabtvec ++rsvdvec: ++ b rsvdvec ++irqvec: ++ b irqvec ++fiqvec: ++ b fiqvec ++ ++reset: ++ /* ++ * set the cpu to SVC32 mode ++ */ ++ mrs r0,cpsr ++ bic r0,r0,#0x1f ++ orr r0,r0,#0xd3 ++ msr cpsr,r0 ++ ++/* turn off the watchdog */ ++#define pWTCON 0x53000000 ++#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ ++#define INTSUBMSK 0x4A00001C ++#define CLKDIVN 0x4C000014 /* clock divisor register */ ++ ++ ldr r0, =pWTCON ++ mov r1, #0x0 ++ str r1, [r0] ++ ++ mov r1, #0xffffffff ++ ldr r0, =INTMSK ++ str r1, [r0] ++ ldr r1, =0x3ff ++ ldr r0, =INTSUBMSK ++ str r1, [r0] ++ ++ /* FCLK:HCLK:PCLK = 1:2:4 */ ++ /* default FCLK is 120 MHz ! */ ++ ldr r0, =CLKDIVN ++ mov r1, #3 ++ str r1, [r0] ++ ++ bl cpu_init_crit ++ ldr r0,=TEXT_BASE ++ mov pc, r0 ++ ++cpu_init_crit: ++ /* ++ * flush v4 I/D caches ++ */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ ++ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ ++ ++ /* ++ * disable MMU stuff and caches ++ */ ++ mrc p15, 0, r0, c1, c0, 0 ++ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) ++ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) ++ orr r0, r0, #0x00000002 @ set bit 2 (A) Align ++ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache ++ mcr p15, 0, r0, c1, c0, 0 ++ ++ /* ++ * before relocating, we have to setup RAM timing ++ * because memory timing is board-dependend, you will ++ * find a lowlevel_init.S in your board directory. ++ */ ++ mov ip, lr ++ bl lowlevel_init ++ mov lr, ip ++ mov pc, lr ++ +Index: u-boot/board/neo1973/common/lowlevel_foo.lds +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/lowlevel_foo.lds +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ lowlevel_foo.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/board/neo1973/gta01/Makefile +=================================================================== +--- u-boot.orig/board/neo1973/gta01/Makefile ++++ u-boot/board/neo1973/gta01/Makefile +@@ -28,14 +28,31 @@ + OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o + SOBJS := ../common/lowlevel_init.o + ++.PHONY: all ++ ++all: $(LIB) lowevel_foo.bin ++ + $(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + ++lowlevel_foo.o: ../common/lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o ../common/lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds ++ $(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ ++ + clean: +- rm -f $(SOBJS) $(OBJS) ++ rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o + + distclean: clean +- rm -f $(LIB) core *.bak .depend ++ rm -f $(LIB) core *.bak .depend lowlevel_foo.bin + + ######################################################################### + +Index: u-boot/board/qt2410/Makefile +=================================================================== +--- u-boot.orig/board/qt2410/Makefile ++++ u-boot/board/qt2410/Makefile +@@ -28,14 +28,31 @@ + OBJS := qt2410.o flash.o + SOBJS := lowlevel_init.o + ++.PHONY: all ++ ++all: $(LIB) lowevel_foo.bin ++ + $(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + ++lowlevel_foo.o: ../neo1973/common/lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o ../neo1973/common/lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o lowlevel_init.o \ ++ ../neo1973/common/lowlevel_foo.lds ++ $(LD) -T ../neo1973/common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ + clean: +- rm -f $(SOBJS) $(OBJS) ++ rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o + + distclean: clean +- rm -f $(LIB) core *.bak .depend ++ rm -f $(LIB) core *.bak .depend lowlevel_foo.bin + + ######################################################################### + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/mmcinit-power-up.patch b/packages/uboot/u-boot-mkimage-gta01-native/mmcinit-power-up.patch new file mode 100644 index 0000000000..fcf54b9fd1 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/mmcinit-power-up.patch @@ -0,0 +1,73 @@ +board/neo1973/neo1973.c (board_late_init): moved MMC power-up to separate + function +cpu/arm920t/s3c24x0/mmc.c (mmc_init): call mmc_power_up and return -ENODEV + immediately if there is no card + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/board/neo1973/neo1973.c +=================================================================== +--- u-boot.orig/board/neo1973/neo1973.c ++++ u-boot/board/neo1973/neo1973.c +@@ -223,6 +223,19 @@ int board_init (void) + return 0; + } + ++int mmc_power_up(void) ++{ ++#if defined(CONFIG_ARCH_GTA01B_v4) ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* check if sd card is inserted, and power-up if it is */ ++ if (gpio->GPFDAT & (1 << 5)) ++ return 0; ++ gpio->GPBDAT &= ~(1 << 2); ++#endif /* !CONFIG_ARCH_GTA01B_v4 */ ++ return 1; ++} ++ + int board_late_init(void) + { + unsigned char tmp; +@@ -289,14 +302,8 @@ continue_boot: + /* switch on the backlight */ + neo1973_backlight(1); + +-#if defined(CONFIG_ARCH_GTA01B_v4) +- { +- /* check if sd card is inserted, and power-up if it is */ +- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); +- if (!(gpio->GPFDAT & (1 << 5))) +- gpio->GPBDAT &= ~(1 << 2); +- } +-#endif ++ /* check if sd card is inserted, and power-up if it is */ ++ mmc_power_up(); + + return 0; + } +Index: u-boot/cpu/arm920t/s3c24x0/mmc.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c ++++ u-boot/cpu/arm920t/s3c24x0/mmc.c +@@ -381,6 +381,11 @@ static void print_sd_cid(const struct sd + cid->crc >> 1, cid->crc & 1); + } + ++int __attribute__((weak)) mmc_power_up(void) ++{ ++ return 1; ++} ++ + int mmc_init(int verbose) + { + int retries, rc = -ENODEV; +@@ -393,6 +398,8 @@ int mmc_init(int verbose) + debug("mmc_init(PCLK=%u)\n", get_PCLK()); + + clk_power->CLKCON |= (1 << 9); ++ if (!mmc_power_up()) ++ return -ENODEV; + + /* S3C2410 has some bug that prevents reliable operation at higher speed */ + //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-badisbad.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-badisbad.patch new file mode 100644 index 0000000000..a5800e2499 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/nand-badisbad.patch @@ -0,0 +1,30 @@ +This patch makes nand_block_checkbad check both the BBT and the actual +OOB data. This avoids accidently passing blocks as good when BBT and +OOB markers are not synchronized, e.g., before "nand createbbt". + +Experimental. + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/drivers/nand/nand_base.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_base.c ++++ u-boot/drivers/nand/nand_base.c +@@ -517,11 +517,14 @@ static int nand_block_checkbad (struct m + { + struct nand_chip *this = mtd->priv; + +- if (!this->bbt) +- return this->block_bad(mtd, ofs, getchip); ++ if (this->block_bad(mtd, ofs, getchip)) ++ return 1; + + /* Return info from the table */ +- return nand_isbad_bbt (mtd, ofs, allowbbt); ++ if (this->bbt && nand_isbad_bbt (mtd, ofs, allowbbt)) ++ return 1; ++ ++ return 0; + } + + /** diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-createbbt.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-createbbt.patch new file mode 100644 index 0000000000..74b79da0a9 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/nand-createbbt.patch @@ -0,0 +1,126 @@ +This patch adds user-requested BBT creation. It includes the following changes: + +- common/cmd_nand.c: move yes/no decision to separate function +- do_nand: ask for confirmation for "nand erase" +- do_nand: add command "nand createbbt" to erase NAND and create a new BBT + +Experimental. + +- Werner Almesberger <werner@openmoko.org> + + +Index: u-boot/common/cmd_nand.c +=================================================================== +--- u-boot.orig/common/cmd_nand.c 2007-02-16 23:53:28.000000000 +0100 ++++ u-boot/common/cmd_nand.c 2007-02-16 23:53:57.000000000 +0100 +@@ -163,6 +163,17 @@ + return 0; + } + ++static int yes(void) ++{ ++ char c; ++ ++ c = getc(); ++ if (c != 'y' && c != 'Y') ++ return 0; ++ c = getc(); ++ return c == '\r' || c == '\n'; ++} ++ + int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) + { + int i, dev, ret; +@@ -228,7 +239,8 @@ + strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 && + strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 && + strcmp(cmd, "biterr") != 0 && +- strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 ) ++ strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 && ++ strcmp(cmd, "createbbt") != 0 ) + goto usage; + + /* the following commands operate on the current device */ +@@ -283,13 +295,23 @@ + "are sure of what you are doing!\n" + "\nReally scrub this NAND flash? <y/N>\n"); + +- if (getc() == 'y' && getc() == '\r') { ++ if (yes()) { + opts.scrub = 1; + } else { + puts("scrub aborted\n"); + return -1; + } + } ++ else { ++ if (opts.length == nand->size) { ++ puts("Really erase everything ? <y/N>\n"); ++ if (!yes()) { ++ puts("erase aborted\n"); ++ return -1; ++ } ++ } ++ } ++ + ret = nand_erase_opts(nand, &opts); + printf("%s\n", ret ? "ERROR" : "OK"); + +@@ -458,6 +480,33 @@ + return 0; + } + ++ if (strcmp(cmd, "createbbt") == 0) { ++ struct nand_chip *nand_chip = nand->priv; ++ nand_erase_options_t opts; ++ ++ puts("Create BBT and erase everything ? <y/N>\n"); ++ if (!yes()) { ++ puts("createbbt aborted\n"); ++ return -1; ++ } ++ memset(&opts, 0, sizeof(opts)); ++ opts.length = nand->size; ++ if (nand_erase_opts(nand, &opts)) { ++ puts("Erase failed\n"); ++ return 1; ++ } ++ nand_chip->options &= ~NAND_DONT_CREATE_BBT; ++ puts("Creating BBT. Please wait ..."); ++ if (nand_default_bbt(nand)) { ++ puts("\nFailed\n"); ++ return 1; ++ } ++ else { ++ puts("\n"); ++ return 0; ++ } ++ } ++ + usage: + printf("Usage:\n%s\n", cmdtp->usage); + return 1; +@@ -478,7 +527,8 @@ + "nand markbad off - mark bad block at offset (UNSAFE)\n" + "nand biterr off - make a bit error at offset (UNSAFE)\n" + "nand lock [tight] [status] - bring nand to lock state or display locked pages\n" +- "nand unlock [offset] [size] - unlock section\n"); ++ "nand unlock [offset] [size] - unlock section\n" ++ "nand createbbt - create bad block table\n"); + + static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, + ulong offset, ulong addr, char *cmd) +Index: u-boot/drivers/nand/nand_bbt.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_bbt.c 2007-02-16 23:53:54.000000000 +0100 ++++ u-boot/drivers/nand/nand_bbt.c 2007-02-16 23:53:57.000000000 +0100 +@@ -795,7 +795,8 @@ + + len = mtd->size >> (this->bbt_erase_shift + 2); + /* Allocate memory (2bit per block) */ +- this->bbt = kmalloc (len, GFP_KERNEL); ++ if (!this->bbt) ++ this->bbt = kmalloc (len, GFP_KERNEL); + if (!this->bbt) { + printk (KERN_ERR "nand_scan_bbt: Out of memory\n"); + return -ENOMEM; diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-dynamic_partitions.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-dynamic_partitions.patch new file mode 100644 index 0000000000..ecce004ca6 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/nand-dynamic_partitions.patch @@ -0,0 +1,354 @@ +This patch adds support for 'dynamic partitions'. This basically +works as follows: +* The nand code generates a bad-block-table at the first scan of the chip +* The dynamic partition code calculates the raw partition sizes based on + the bad block table. E.g. if you have a partition of size 0x30000, and there are + two bad blocks (0x4000 each) in it, the raw size will increase to 0x38000, and the + following partitions get shifted towards the end of flash. + +Please note that currently the desired partition sizes are stored at compile-time +in an array in drivers/nand/nand_bbt.c, so this definitely needs to change before +submitting/merging upstream. + +In order to calculate the partiton map (and set mtdparts accordingly), you can use +the 'dynpart' command at the prompt. Use 'saveenv' to make the setting permanent. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/drivers/nand/nand_bbt.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_bbt.c ++++ u-boot/drivers/nand/nand_bbt.c +@@ -1044,9 +1044,86 @@ + switch ((int)res) { + case 0x00: return 0; + case 0x01: return 1; ++ case 0x03: return 1; + case 0x02: return allowbbt ? 0 : 1; + } + return 1; + } + ++#if defined(CONFIG_NAND_DYNPART) ++ ++extern unsigned int dynpart_size[]; ++extern char *dynpart_names[]; ++ ++#define MTDPARTS_MAX_SIZE 512 ++ ++ ++static int skip_offs(const struct nand_chip *this, unsigned int offs) ++{ ++ int block = (int) (offs >> (this->bbt_erase_shift - 1)); ++ u_int8_t bbt = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; ++ ++ return bbt == 3; ++} ++ ++int nand_create_mtd_dynpart(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ int part; ++ char *mtdparts; ++ unsigned int cur_offs = 0; ++ ++ mtdparts = malloc(MTDPARTS_MAX_SIZE); /* FIXME: bounds checking */ ++ if (!mtdparts) ++ return -ENOMEM; ++ ++ sprintf(mtdparts, "mtdparts=" CFG_NAND_DYNPART_MTD_KERNEL_NAME ":"); ++ ++ for (part = 0; dynpart_size[part] != 0; part++) { ++ unsigned int bb_delta = 0; ++ unsigned int offs = 0; ++ char mtdpart[32]; ++ ++ for (offs = cur_offs; ++ offs < cur_offs + dynpart_size[part] + bb_delta; ++ offs += mtd->erasesize) { ++ if (skip_offs(this, offs)) ++ bb_delta += mtd->erasesize; ++ } ++ ++ /* ++ * Absorb bad blocks immediately following this partition also ++ * into the partition, in order to make next partition start ++ * with a good block. This simplifies handling of the ++ * environment partition. ++ */ ++ while (offs < this->chipsize && skip_offs(this, offs)) { ++ bb_delta += mtd->erasesize; ++ offs += mtd->erasesize; ++ } ++ ++ if (cur_offs + dynpart_size[part] + bb_delta > this->chipsize) ++ dynpart_size[part] = this->chipsize - cur_offs - bb_delta; ++#if 0 ++ printf("partition %u: start = 0x%08x, end=%08x size=%08x, size_inc_bb=%08x\n", ++ part, cur_offs, cur_offs + dynpart_size[part] + bb_delta, ++ dynpart_size[part], dynpart_size[part] + bb_delta); ++#endif ++ cur_offs += dynpart_size[part] + bb_delta; ++ sprintf(mtdpart, "0x%.8x(%.16s),", dynpart_size[part] + bb_delta, ++ dynpart_names[part]); ++ mtdpart[sizeof(mtdpart)-1] = '\0'; ++ strncat(mtdparts, mtdpart, ++ MTDPARTS_MAX_SIZE-strlen(mtdparts)-1); ++ } ++ ++ mtdparts[strlen(mtdparts)-1] = '\0'; ++ printf("mtdparts %s\n", mtdparts); ++ setenv("mtdparts", mtdparts); ++ ++ free(mtdparts); ++ return 0; ++} ++#endif /* CONFIG_NAND_DYNPART */ ++ + #endif +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -99,7 +99,7 @@ + CFG_CMD_ELF | \ + CFG_CMD_MISC | \ + /* CFG_CMD_USB | */ \ +- /* CFG_CMD_JFFS2 | */ \ ++ CFG_CMD_JFFS2 | \ + CFG_CMD_DIAG | \ + /* CFG_CMD_HWFLOW | */ \ + CFG_CMD_SAVES | \ +@@ -212,13 +212,13 @@ + #define CONFIG_FAT 1 + #define CONFIG_SUPPORT_VFAT + +-#if 0 ++#if 1 + /* JFFS2 driver */ + #define CONFIG_JFFS2_CMDLINE 1 + #define CONFIG_JFFS2_NAND 1 + #define CONFIG_JFFS2_NAND_DEV 0 +-#define CONFIG_JFFS2_NAND_OFF 0x634000 +-#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 + #endif + + /* ATAG configuration */ +@@ -257,4 +257,9 @@ + + #define CONFIG_DRIVER_PCF50606 1 + ++#define MTDIDS_DEFAULT "nand0=neo1973-nand" ++#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),16k(u-boot_env),2M(kernel),640k(splash),-(jffs2)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" ++#define CONFIG_NAND_DYNPART ++ + #endif /* __CONFIG_H */ +Index: u-boot/common/cmd_jffs2.c +=================================================================== +--- u-boot.orig/common/cmd_jffs2.c ++++ u-boot/common/cmd_jffs2.c +@@ -1841,6 +1841,29 @@ + return NULL; + } + ++/* Return the 'net size' of the partition (i.e. excluding any bad blocks) */ ++unsigned int nand_net_part_size(struct part_info *part) ++{ ++ struct mtd_info *mtd; ++ unsigned int offs; ++ unsigned int bb_delta = 0; ++ ++ if (!part || !part->dev || !part->dev->id || ++ part->dev->id->num >= CFG_MAX_NAND_DEVICE) ++ return 0; ++ ++ mtd = &nand_info[part->dev->id->num]; ++ ++ for (offs = part->offset; offs < part->offset + part->size; ++ offs += mtd->erasesize) { ++ if (nand_isbad_bbt(mtd, offs, 0)) ++ bb_delta += mtd->erasesize; ++ } ++ ++ return part->size - bb_delta; ++} ++ ++ + /***************************************************/ + /* U-boot commands */ + /***************************************************/ +@@ -2132,6 +2155,24 @@ + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } ++ ++#if defined(CONFIG_NAND_DYNPART) ++extern int nand_create_mtd_dynpart(struct mtd_info *mtd); ++ ++int do_dynpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++#if 0 ++ int i = simple_strtoul(argv[1], NULL, 0); ++ if (i >= CFG_MAX_NAND_DEVICE) ++ return -EINVAL; ++#endif ++ nand_create_mtd_dynpart(&nand_info[0]); ++ ++ return 0; ++} ++#endif /* CONFIG_NAND_DYNPART */ ++ ++ + #endif /* #ifdef CONFIG_JFFS2_CMDLINE */ + + /***************************************************/ +@@ -2197,6 +2238,15 @@ + "<name> := '(' NAME ')'\n" + "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)\n" + ); ++ ++#if defined(CONFIG_NAND_DYNPART) ++U_BOOT_CMD( ++ dynpart, 1, 1, do_dynpart, ++ "dynpart\t- dynamically calculate partition table based on BBT\n", ++ "\n" ++ " - sets 'mtdparts' according to BBT\n"); ++#endif /* CONFIG_NAND_DYNPART */ ++ + #endif /* #ifdef CONFIG_JFFS2_CMDLINE */ + + /***************************************************/ +Index: u-boot/common/cmd_nand.c +=================================================================== +--- u-boot.orig/common/cmd_nand.c ++++ u-boot/common/cmd_nand.c +@@ -101,7 +101,7 @@ + } + + int +-arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size) ++arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, ulong *size, int net) + { + int idx = nand_curr_device; + #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE) +@@ -122,10 +122,17 @@ + printf("'%s' is not a number\n", argv[1]); + return -1; + } +- if (*size > part->size) +- *size = part->size; ++ if (*size > part->size) { ++ if (net) ++ *size = nand_net_part_size(part); ++ else ++ *size = part->size; ++ } + } else { +- *size = part->size; ++ if (net) ++ *size = nand_net_part_size(part); ++ else ++ *size = part->size; + } + idx = dev->id->num; + *nand = nand_info[idx]; +@@ -261,7 +268,7 @@ + + printf("\nNAND %s: ", scrub ? "scrub" : "erase"); + /* skip first two or three arguments, look for offset and size */ +- if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0) ++ if (arg_off_size(argc - o, argv + o, nand, &off, &size, 0) != 0) + return 1; + + memset(&opts, 0, sizeof(opts)); +@@ -323,7 +330,7 @@ + + read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ + printf("\nNAND %s: ", read ? "read" : "write"); +- if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0) ++ if (arg_off_size(argc - 3, argv + 3, nand, &off, &size, 1) != 0) + return 1; + + s = strchr(cmd, '.'); +@@ -445,7 +452,7 @@ + } + + if (strcmp(cmd, "unlock") == 0) { +- if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0) ++ if (arg_off_size(argc - 2, argv + 2, nand, &off, &size, 0) < 0) + return 1; + + if (!nand_unlock(nand, off, size)) { +Index: u-boot/common/cmd_dynenv.c +=================================================================== +--- u-boot.orig/common/cmd_dynenv.c ++++ u-boot/common/cmd_dynenv.c +@@ -60,7 +60,7 @@ + buf[2] = 'V'; + buf[3] = '0'; + +- if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy) < 0) { ++ if (arg_off_size(argc-2, argv+2, mtd, &addr, &dummy, 1) < 0) { + printf("Offset or partition name expected\n"); + goto fail; + } +Index: u-boot/include/util.h +=================================================================== +--- u-boot.orig/include/util.h ++++ u-boot/include/util.h +@@ -28,6 +28,6 @@ + + /* common/cmd_nand.c */ + int arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, +- ulong *size); ++ ulong *size, int net); + + #endif /* UTIL_H */ +Index: u-boot/board/qt2410/qt2410.c +=================================================================== +--- u-boot.orig/board/qt2410/qt2410.c ++++ u-boot/board/qt2410/qt2410.c +@@ -126,3 +126,9 @@ + + return 0; + } ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, 0x4000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ +Index: u-boot/board/neo1973/gta01/gta01.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/gta01.c ++++ u-boot/board/neo1973/gta01/gta01.c +@@ -429,3 +434,14 @@ + return 0; + } + ++ ++/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. ++ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 ++ images: 640*480*2*2 = 1228800 < 1245184. */ ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, 0x4000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ ++ +Index: u-boot/include/configs/qt2410.h +=================================================================== +--- u-boot.orig/include/configs/qt2410.h ++++ u-boot/include/configs/qt2410.h +@@ -283,5 +283,7 @@ + + #define MTDIDS_DEFAULT "nand0=qt2410-nand" + #define MTPARTS_DEFAULT "qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "qt2410-nand" ++#define CONFIG_NAND_DYNPART + + #endif /* __CONFIG_H */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-otp.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-otp.patch new file mode 100644 index 0000000000..b0e9bf4c4b --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/nand-otp.patch @@ -0,0 +1,302 @@ +Index: u-boot/common/cmd_nand.c +=================================================================== +--- u-boot.orig/common/cmd_nand.c ++++ u-boot/common/cmd_nand.c +@@ -392,6 +392,14 @@ + else + ret = nand->write_oob(nand, off, size, &size, + (u_char *) addr); ++ } else if (s != NULL && !strcmp(s, ".otp")) { ++ /* read out-of-band data */ ++ if (read) ++ ret = nand->read_otp(nand, off, size, &size, ++ (u_char *) addr); ++ else ++ ret = nand->write_otp(nand, off, size, &size, ++ (u_char *) addr); + } else { + if (read) + ret = nand_read(nand, off, &size, (u_char *)addr); +@@ -527,8 +535,9 @@ + "nand - NAND sub-system\n", + "info - show available NAND devices\n" + "nand device [dev] - show or set current device\n" +- "nand read[.jffs2] - addr off|partition size\n" +- "nand write[.jffs2] - addr off|partiton size - read/write `size' bytes starting\n" ++ "nand read[.jffs2, .oob, .otp] addr off|partition size\n" ++ "nand write[.jffs2, .oob, .otp] addr off|partiton size\n" ++ " - read/write `size' bytes starting\n" + " at offset `off' to/from memory address `addr'\n" + "nand erase [clean] [off size] - erase `size' bytes from\n" + " offset `off' (entire device if not specified)\n" +Index: u-boot/cpu/arm920t/s3c24x0/nand.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/nand.c ++++ u-boot/cpu/arm920t/s3c24x0/nand.c +@@ -205,7 +205,7 @@ + } + #endif + +-int board_nand_init(struct nand_chip *nand) ++int s3c24x0_nand_init(struct nand_chip *nand) + { + u_int32_t cfg; + u_int8_t tacls, twrph0, twrph1; +Index: u-boot/drivers/nand/nand_base.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_base.c ++++ u-boot/drivers/nand/nand_base.c +@@ -2042,6 +2042,32 @@ + } + #endif + ++/* ++ * See nand_read_oob and nand_write_oob ++ */ ++ ++static int nand_read_otp(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, u_char *buf) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (!this->read_otp) ++ return -ENOSYS; ++ return this->read_otp(mtd, from, len, retlen, buf); ++ ++} ++ ++static int nand_write_otp(struct mtd_info *mtd, loff_t to, size_t len, ++ size_t *retlen, const u_char *buf) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (!this->write_otp) ++ return -ENOSYS; ++ return this->write_otp(mtd, to, len, retlen, buf); ++} ++ ++ + /** + * single_erease_cmd - [GENERIC] NAND standard block erase command function + * @mtd: MTD device structure +@@ -2613,6 +2639,8 @@ + mtd->write_ecc = nand_write_ecc; + mtd->read_oob = nand_read_oob; + mtd->write_oob = nand_write_oob; ++ mtd->read_otp = nand_read_otp; ++ mtd->write_otp = nand_write_otp; + /* XXX U-BOOT XXX */ + #if 0 + mtd->readv = NULL; +Index: u-boot/include/linux/mtd/mtd.h +=================================================================== +--- u-boot.orig/include/linux/mtd/mtd.h ++++ u-boot/include/linux/mtd/mtd.h +@@ -95,6 +95,9 @@ + int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + ++ int (*read_otp) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); ++ int (*write_otp) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); ++ + /* + * Methods to access the protection register area, present in some + * flash devices. The user data is one time programmable but the +Index: u-boot/include/linux/mtd/nand.h +=================================================================== +--- u-boot.orig/include/linux/mtd/nand.h ++++ u-boot/include/linux/mtd/nand.h +@@ -307,6 +307,10 @@ + void (*enable_hwecc)(struct mtd_info *mtd, int mode); + void (*erase_cmd)(struct mtd_info *mtd, int page); + int (*scan_bbt)(struct mtd_info *mtd); ++ int (*read_otp)(struct mtd_info *mtd, loff_t from, ++ size_t len, size_t *retlen, u_char *buf); ++ int (*write_otp) (struct mtd_info *mtd, loff_t to, ++ size_t len, size_t *retlen, const u_char *buf); + int eccmode; + int eccsize; + int eccbytes; +Index: u-boot/board/neo1973/gta01/Makefile +=================================================================== +--- u-boot.orig/board/neo1973/gta01/Makefile ++++ u-boot/board/neo1973/gta01/Makefile +@@ -25,7 +25,7 @@ + + LIB = lib$(BOARD).a + +-OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o ++OBJS := gta01.o pcf50606.o nand.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o + SOBJS := ../common/lowlevel_init.o + + .PHONY: all +Index: u-boot/board/neo1973/gta01/nand.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/nand.c +@@ -0,0 +1,121 @@ ++/* ++ * nand.c - Board-specific NAND setup ++ * ++ * Copyright (C) 2007 by OpenMoko, Inc. ++ * Written by Werner Almesberger <werner@openmoko.org> ++ * All Rights Reserved ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include "config.h" /* nand.h needs NAND_MAX_CHIPS */ ++#include "linux/mtd/mtd.h" ++#include "linux/mtd/nand.h" ++#include "asm/errno.h" ++ ++ ++int s3c24x0_nand_init(struct nand_chip *nand); ++ ++ ++static void samsung_nand_begin_otp(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ /* @@@FIXME: this is ugly - we select the NAND chip to send the ++ mode switch commands, knowing that it will be switched off later */ ++ this->select_chip(mtd, 0); ++ /* "magic" mode change */ ++ this->cmdfunc(mtd, 0x30, -1, -1); ++ this->cmdfunc(mtd, 0x65, -1, -1); ++} ++ ++ ++static void samsung_nand_end_otp(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ /* read/write deselected the chip so now we need to select again */ ++ this->select_chip(mtd, 0); ++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ this->select_chip(mtd, -1); ++} ++ ++ ++static loff_t otp_page[] = { ++ 0x15, /* 00-XX-00-00, with XX = 15h-19h */ ++ 0x16, ++ 0x17, ++ 0x18, ++ 0x19, ++ 0x1b, /* 00-1B-00-00 */ ++}; ++ ++#define OTP_PAGES (sizeof(otp_page)/sizeof(*otp_page)) ++ ++ ++static int convert_otp_address(loff_t *addr, size_t *len) ++{ ++ int page; ++ ++ if (*len && *addr >> 9 != (*addr+*len-1) >> 9) ++ return -EINVAL; ++ if (*len > 512) ++ return -EINVAL; ++ page = *addr >> 9; ++ if (page >= OTP_PAGES) ++ return -EINVAL; ++ *addr = otp_page[page] << 9; ++ return 0; ++} ++ ++ ++static int samsung_nand_read_otp(struct mtd_info *mtd, loff_t from, ++ size_t len, size_t *retlen, u_char *buf) ++{ ++ int ret; ++ ++ ret = convert_otp_address(&from, &len); ++ if (ret) ++ return ret; ++ samsung_nand_begin_otp(mtd); ++ ret = mtd->read(mtd, from, len, retlen, buf); ++ samsung_nand_end_otp(mtd); ++ return ret; ++} ++ ++ ++static int samsung_nand_write_otp(struct mtd_info *mtd, loff_t to, ++ size_t len, size_t *retlen, const u_char *buf) ++{ ++ int ret; ++ ++ ret = convert_otp_address(&to, &len); ++ if (ret) ++ return ret; ++ samsung_nand_begin_otp(mtd); ++ ret = mtd->write(mtd, to, len, retlen, buf); ++ samsung_nand_end_otp(mtd); ++ return ret; ++} ++ ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ nand->read_otp = samsung_nand_read_otp; ++ nand->write_otp = samsung_nand_write_otp; ++ return s3c24x0_nand_init(nand); ++} +Index: u-boot/board/neo1973/gta02/nand.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/nand.c +@@ -0,0 +1,39 @@ ++/* ++ * nand.c - Board-specific NAND setup ++ * ++ * Copyright (C) 2007 by OpenMoko, Inc. ++ * Written by Werner Almesberger <werner@openmoko.org> ++ * All Rights Reserved ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include "config.h" /* nand.h needs NAND_MAX_CHIPS */ ++#include "linux/mtd/mtd.h" ++#include "linux/mtd/nand.h" ++ ++ ++int s3c24x0_nand_init(struct nand_chip *nand); ++ ++ ++/* Add OTP et al later */ ++ ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ return s3c24x0_nand_init(nand); ++} diff --git a/packages/uboot/u-boot-mkimage-gta01-native/nand-read_write_oob.patch b/packages/uboot/u-boot-mkimage-gta01-native/nand-read_write_oob.patch new file mode 100644 index 0000000000..8360409e46 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/nand-read_write_oob.patch @@ -0,0 +1,23 @@ +Re-introduce the 'nand read.oob' and 'nand write.oob' commands +that used to exist with the legacy NAND code + +Signed-off-by: Harald Welte <laforge@openmoko.org> +Index: u-boot.git/common/cmd_nand.c +=================================================================== +--- u-boot.git.orig/common/cmd_nand.c 2007-01-26 15:41:13.000000000 +0100 ++++ u-boot.git/common/cmd_nand.c 2007-01-26 15:49:37.000000000 +0100 +@@ -351,6 +351,14 @@ + opts.quiet = quiet; + ret = nand_write_opts(nand, &opts); + } ++ } else if (s != NULL && !strcmp(s, ".oob")) { ++ /* read out-of-band data */ ++ if (read) ++ ret = nand->read_oob(nand, off, size, &size, ++ (u_char *) addr); ++ else ++ ret = nand->write_oob(nand, off, size, &size, ++ (u_char *) addr); + } else { + if (read) + ret = nand_read(nand, off, &size, (u_char *)addr); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/neo1973-chargefast.patch b/packages/uboot/u-boot-mkimage-gta01-native/neo1973-chargefast.patch new file mode 100644 index 0000000000..6f6af2c758 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/neo1973-chargefast.patch @@ -0,0 +1,316 @@ +Index: u-boot/drivers/usbtty.c +=================================================================== +--- u-boot.orig/drivers/usbtty.c ++++ u-boot/drivers/usbtty.c +@@ -66,7 +66,7 @@ + /* + * Defines + */ +-#define NUM_CONFIGS 1 ++#define NUM_CONFIGS 2 + #define MAX_INTERFACES 2 + #define NUM_ENDPOINTS 3 + #define ACM_TX_ENDPOINT 3 +@@ -192,8 +192,7 @@ + #endif + .bConfigurationValue = 1, + .iConfiguration = STR_CONFIG, +- .bmAttributes = +- BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, ++ .bmAttributes = BMATTRIBUTE_RESERVED, + .bMaxPower = USBTTY_MAXPOWER + }, + /* Interface 1 */ +@@ -294,6 +293,120 @@ + .func_dfu = DFU_FUNC_DESC, + #endif + }, ++ { ++ .configuration_desc ={ ++ .bLength = ++ sizeof(struct usb_configuration_descriptor), ++ .bDescriptorType = USB_DT_CONFIG, ++ .wTotalLength = ++ cpu_to_le16(sizeof(struct acm_config_desc) ++#ifdef CONFIG_USBD_DFU ++ - sizeof(struct usb_interface_descriptor) ++ - sizeof(struct usb_dfu_func_descriptor) ++#endif ++ ), ++ .bNumInterfaces = NUM_ACM_INTERFACES, ++ .bConfigurationValue = 2, ++ .iConfiguration = STR_CONFIG, ++ .bmAttributes = BMATTRIBUTE_RESERVED, ++ .bMaxPower = 50, /* 100mA */ ++ }, ++ /* Interface 1 */ ++ .interface_desc = { ++ .bLength = sizeof(struct usb_interface_descriptor), ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0x01, ++ .bInterfaceClass = ++ COMMUNICATIONS_INTERFACE_CLASS_CONTROL, ++ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS, ++ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL, ++ .iInterface = STR_CTRL_INTERFACE, ++ }, ++ .usb_class_header = { ++ .bFunctionLength = ++ sizeof(struct usb_class_header_function_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_HEADER, ++ .bcdCDC = cpu_to_le16(110), ++ }, ++ .usb_class_call_mgt = { ++ .bFunctionLength = ++ sizeof(struct usb_class_call_management_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_CMF, ++ .bmCapabilities = 0x00, ++ .bDataInterface = 0x01, ++ }, ++ .usb_class_acm = { ++ .bFunctionLength = ++ sizeof(struct usb_class_abstract_control_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_ACMF, ++ .bmCapabilities = 0x00, ++ }, ++ .usb_class_union = { ++ .bFunctionLength = ++ sizeof(struct usb_class_union_function_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_UF, ++ .bMasterInterface = 0x00, ++ .bSlaveInterface0 = 0x01, ++ }, ++ .notification_endpoint = { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x01 | USB_DIR_IN, ++ .bmAttributes = USB_ENDPOINT_XFER_INT, ++ .wMaxPacketSize ++ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ ++ /* Interface 2 */ ++ .data_class_interface = { ++ .bLength = ++ sizeof(struct usb_interface_descriptor), ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x01, ++ .bAlternateSetting = 0x00, ++ .bNumEndpoints = 0x02, ++ .bInterfaceClass = ++ COMMUNICATIONS_INTERFACE_CLASS_DATA, ++ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE, ++ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE, ++ .iInterface = STR_DATA_INTERFACE, ++ }, ++ .data_endpoints = { ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x02 | USB_DIR_OUT, ++ .bmAttributes = ++ USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x03 | USB_DIR_IN, ++ .bmAttributes = ++ USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ }, ++ /* We don't add the DFU functional descriptor here since we only ++ * want to do DFU in the high-current charging mode for safety reasons */ ++ }, ++ + }; + + static struct rs232_emu rs232_desc={ +@@ -330,8 +443,7 @@ + .bNumInterfaces = NUM_GSERIAL_INTERFACES, + .bConfigurationValue = 1, + .iConfiguration = STR_CONFIG, +- .bmAttributes = +- BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, ++ .bmAttributes = BMATTRIBUTE_RESERVED, + .bMaxPower = USBTTY_MAXPOWER + }, + .interface_desc = { +@@ -384,6 +496,68 @@ + }, + }, + }, ++ { ++ .configuration_desc ={ ++ .bLength = sizeof(struct usb_configuration_descriptor), ++ .bDescriptorType = USB_DT_CONFIG, ++ .wTotalLength = ++ cpu_to_le16(sizeof(struct gserial_config_desc)), ++ .bNumInterfaces = NUM_GSERIAL_INTERFACES, ++ .bConfigurationValue = 1, ++ .iConfiguration = STR_CONFIG, ++ .bmAttributes = BMATTRIBUTE_RESERVED, ++ .bMaxPower = 50 ++ }, ++ .interface_desc = { ++ { ++ .bLength = ++ sizeof(struct usb_interface_descriptor), ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = NUM_ENDPOINTS, ++ .bInterfaceClass = ++ COMMUNICATIONS_INTERFACE_CLASS_VENDOR, ++ .bInterfaceSubClass = ++ COMMUNICATIONS_NO_SUBCLASS, ++ .bInterfaceProtocol = ++ COMMUNICATIONS_NO_PROTOCOL, ++ .iInterface = STR_DATA_INTERFACE ++ }, ++ }, ++ .data_endpoints = { ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x01 | USB_DIR_OUT, ++ .bmAttributes = USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE), ++ .bInterval= 0xFF, ++ }, ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x02 | USB_DIR_IN, ++ .bmAttributes = USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x03 | USB_DIR_IN, ++ .bmAttributes = USB_ENDPOINT_XFER_INT, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ }, ++ }, + }; + + /* +@@ -679,12 +853,14 @@ + bus_instance->maxpacketsize = 64; + bus_instance->serial_number_str = serial_number; + +- /* configuration instance */ +- memset (config_instance, 0, +- sizeof (struct usb_configuration_instance)); +- config_instance->interfaces = interface_count; +- config_instance->configuration_descriptor = configuration_descriptor; +- config_instance->interface_instance_array = interface_instance; ++ /* configuration instances */ ++ for (i = 0; i < NUM_CONFIGS; i++) { ++ memset(&config_instance[i], 0, sizeof(config_instance)); ++ config_instance[i].interfaces = interface_count; ++ /* FIXME: this breaks for the non-ACM case */ ++ config_instance[i].configuration_descriptor = &acm_configuration_descriptors[i]; ++ config_instance[i].interface_instance_array = interface_instance; ++ } + + /* interface instance */ + memset (interface_instance, 0, +@@ -1043,9 +1219,17 @@ + usbtty_configured_flag = 0; + break; + case DEVICE_CONFIGURED: ++ printf("DEVICE_CONFIGURED: %u\n", device->configuration); ++ if (device->configuration == 1) ++ udc_ctrl(UDC_CTRL_500mA_ENABLE, 1); ++ else ++ udc_ctrl(UDC_CTRL_500mA_ENABLE, 0); + usbtty_configured_flag = 1; + break; +- ++ case DEVICE_DE_CONFIGURED: ++ printf("DEVICE_DE_CONFIGURED\n"); ++ udc_ctrl(UDC_CTRL_500mA_ENABLE, 0); ++ break; + case DEVICE_ADDRESS_ASSIGNED: + usbtty_init_endpoints (); + +Index: u-boot/drivers/usbtty.h +=================================================================== +--- u-boot.orig/drivers/usbtty.h ++++ u-boot/drivers/usbtty.h +@@ -60,7 +60,7 @@ + #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS + + #define USBTTY_BCD_DEVICE 0x00 +-#define USBTTY_MAXPOWER 0x00 ++#define USBTTY_MAXPOWER 250 /* 500mA */ + + #define STR_LANG 0x00 + #define STR_MANUFACTURER 0x01 +Index: u-boot/board/neo1973/common/udc.c +=================================================================== +--- u-boot.orig/board/neo1973/common/udc.c ++++ u-boot/board/neo1973/common/udc.c +@@ -2,6 +2,7 @@ + #include <common.h> + #include <usbdcore.h> + #include <s3c2410.h> ++#include <pcf50606.h> + + void udc_ctrl(enum usbd_event event, int param) + { +@@ -17,6 +18,13 @@ + gpio->GPBDAT &= ~(1 << 9); + #endif + break; ++ case UDC_CTRL_500mA_ENABLE: ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) || \ ++ defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ ++ defined(CONFIG_ARCH_GTA01B_v4) ++ pcf50606_charge_autofast(param); ++#endif ++ break; + default: + break; + } +Index: u-boot/include/usbdcore.h +=================================================================== +--- u-boot.orig/include/usbdcore.h ++++ u-boot/include/usbdcore.h +@@ -686,8 +686,8 @@ + + enum usbd_event { + UDC_CTRL_PULLUP_ENABLE, ++ UDC_CTRL_500mA_ENABLE, + }; + + void udc_ctrl(enum usbd_event event, int param); + #endif +-#endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/preboot-override.patch b/packages/uboot/u-boot-mkimage-gta01-native/preboot-override.patch new file mode 100644 index 0000000000..f32cbde27b --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/preboot-override.patch @@ -0,0 +1,137 @@ +Provide a place where the loader can patch the binary, such that it executes a +command string from RAM. We use this for automated installs, where we can thus +use the same u-boot binary for all stages. + +include/configs/neo1973.h: new option CFG_PREBOOT_OVERRIDE to allow setting of + the preboot command in memory +cpu/arm920t/start.S: added variable "preboot_override" at known location + (_start+0x40) +common/main.c (main_loop): if preboot_override is set, execute the command + string found there +common/env_common.c (env_relocate): if preboot_override is set, always use the + default environment + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -77,6 +77,14 @@ _fiq: .word fiq + ************************************************************************* + */ + ++ ++/* Must follow the .balign above, so we get a well-known address ! */ ++#ifdef CFG_PREBOOT_OVERRIDE ++.globl preboot_override ++preboot_override: ++ .word 0 ++#endif ++ + #ifdef CONFIG_S3C2410_NAND_BOOT + .globl booted_from_nand + booted_from_nand: +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -207,6 +207,7 @@ + #define CFG_ENV_IS_IN_NAND 1 + #define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ + #define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ ++#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ + + #define NAND_MAX_CHIPS 1 + #define CFG_NAND_BASE 0x4e000000 +Index: u-boot/common/main.c +=================================================================== +--- u-boot.orig/common/main.c ++++ u-boot/common/main.c +@@ -85,6 +85,11 @@ int do_mdm_init = 0; + extern void mdm_init(void); /* defined in board.c */ + #endif + ++#ifdef CFG_PREBOOT_OVERRIDE ++extern char *preboot_override; ++#endif ++ ++ + /*************************************************************************** + * Watch for 'delay' seconds for autoboot stop or autoboot delay string. + * returns: 0 - no key string, allow autoboot +@@ -306,8 +311,8 @@ void main_loop (void) + char *s; + int bootdelay; + #endif +-#ifdef CONFIG_PREBOOT +- char *p; ++#if defined(CONFIG_PREBOOT) || defined(CFG_PREBOOT_OVERRIDE) ++ char *p = NULL; + #endif + #ifdef CONFIG_BOOTCOUNT_LIMIT + unsigned long bootcount = 0; +@@ -364,8 +369,23 @@ void main_loop (void) + install_auto_complete(); + #endif + ++#if defined(CONFIG_PREBOOT) || defined(CFG_PREBOOT_OVERRIDE) + #ifdef CONFIG_PREBOOT +- if ((p = getenv ("preboot")) != NULL) { ++ p = getenv ("preboot"); ++#endif ++#ifdef CFG_PREBOOT_OVERRIDE ++ if (preboot_override) { ++ /* for convenience, preboot_override may end in \n, not \0 */ ++ p = strchr(preboot_override, '\n'); ++ if (p) ++ *p = 0; ++ /* make sure we can overwrite the load area if we want to */ ++ p = strdup(preboot_override); ++ /* clean the image in case we want to flash it */ ++ preboot_override = NULL; ++ } ++#endif /* CFG_PREBOOT_OVERRIDE */ ++ if (p) { + # ifdef CONFIG_AUTOBOOT_KEYED + int prev = disable_ctrlc(1); /* disable Control C checking */ + # endif +@@ -381,7 +401,7 @@ void main_loop (void) + disable_ctrlc(prev); /* restore Control C checking */ + # endif + } +-#endif /* CONFIG_PREBOOT */ ++#endif /* CONFIG_PREBOOT || CFG_PREBOOT_OVERRIDE */ + + #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) + s = getenv ("bootdelay"); +Index: u-boot/common/env_common.c +=================================================================== +--- u-boot.orig/common/env_common.c ++++ u-boot/common/env_common.c +@@ -37,6 +37,10 @@ + # define SHOW_BOOT_PROGRESS(arg) + #endif + ++#ifdef CFG_PREBOOT_OVERRIDE ++extern char *preboot_override; ++#endif ++ + DECLARE_GLOBAL_DATA_PTR; + + #ifdef CONFIG_AMIGAONEG3SE +@@ -234,7 +238,14 @@ void env_relocate (void) + puts ("*** Warning - bad CRC, using default environment\n\n"); + SHOW_BOOT_PROGRESS (-1); + #endif ++ } ++ ++#ifdef CFG_PREBOOT_OVERRIDE ++ if (preboot_override) ++ gd->env_valid = 0; ++#endif + ++ if (gd->env_valid == 0) { + if (sizeof(default_environment) > ENV_SIZE) + { + puts ("*** Error - default environment is too large\n\n"); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/raise-limits.patch b/packages/uboot/u-boot-mkimage-gta01-native/raise-limits.patch new file mode 100644 index 0000000000..a1c381a2cf --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/raise-limits.patch @@ -0,0 +1,31 @@ +include/configs/neo1973.h: increase heap from 128 kB to 400 kB, for BMP image + decompression + [ note: increasing it to 512 kB trips over something. note sure what. + find out. ] +include/configs/neo1973.h: raise number of command line arguments from 16 to 64 + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -54,7 +54,8 @@ + /* + * Size of malloc() pool + */ +-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) ++ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ + #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + + /* +@@ -142,7 +143,7 @@ + #endif + #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +-#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_MAXARGS 64 /* max number of command args */ + #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + + #define CFG_MEMTEST_START 0x30000000 /* memtest works on */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/series b/packages/uboot/u-boot-mkimage-gta01-native/series new file mode 100644 index 0000000000..4fc7d1342f --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/series @@ -0,0 +1,76 @@ +# just some local hacks +uboot-machtypes.patch +ext2load_hex.patch +uboot-mokoversion.patch + +# those we want to get mainline +uboot-s3c2410-warnings-fix.patch +uboot-strtoul.patch +uboot-cramfs_but_no_jffs2.patch +nand-read_write_oob.patch +uboot-arm920t-gd_in_irq.patch +uboot-arm920_s3c2410_irq_demux.patch +uboot-s3c2410-nand.patch +uboot-cmd_s3c2410.patch +uboot-s3c2410-mmc.patch +env_nand_oob.patch +dynenv-harden.patch +uboot-s3c2410_fb.patch +uboot-20061030-qt2410.patch +uboot-20061030-neo1973.patch + +# under construction, but intended for mainline +uboot-s3c2410-misccr-definitions.patch + +boot-from-ram-reloc.patch +boot-from-ram-and-nand.patch +wakeup-reason-nand-only.patch +uboot-neo1973-resume.patch + +# this will be somewhat more difficult +nand-dynamic_partitions.patch +uboot-s3c2410-norelocate_irqvec_cpy.patch +uboot-usbtty-acm.patch +uboot-s3c2410_udc.patch + +# those need to be cleaned up +bbt-create-optional.patch +nand-createbbt.patch +dontask.patch +nand-badisbad.patch +uboot-bbt-quiet.patch + +# splash screen +raise-limits.patch +splashimage-command.patch +cmd-unzip.patch +enable-splash-bmp.patch + +# for automated installation +preboot-override.patch +lowlevel_foo.patch + +# move these later, once the dust has settled +default-env.patch +console-ansi.patch +boot-menu.patch + +# those have to be implemented fully +uboot-dfu.patch +uboot-neo1973-defaultenv.patch +uboot-nand-markbad-reallybad.patch +usbdcore-multiple_configs.patch +neo1973-chargefast.patch + +uboot-s3c2440.patch +uboot-smdk2440.patch +uboot-hxd8.patch + +uboot-license.patch + +uboot-gta02.patch +uboot-s3c2443.patch +uboot-smdk2443.patch + +# for review, merge soon +unbusy-i2c.patch diff --git a/packages/uboot/u-boot-mkimage-gta01-native/splashimage-command.patch b/packages/uboot/u-boot-mkimage-gta01-native/splashimage-command.patch new file mode 100644 index 0000000000..8ea48cf484 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/splashimage-command.patch @@ -0,0 +1,24 @@ +drivers/cfb_console.c (video_logo): if "splashimage" doesn't contain an + address, use its content as a command + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/drivers/cfb_console.c +=================================================================== +--- u-boot.orig/drivers/cfb_console.c ++++ u-boot/drivers/cfb_console.c +@@ -1121,7 +1121,13 @@ static void *video_logo (void) + ulong addr; + + if ((s = getenv ("splashimage")) != NULL) { +- addr = simple_strtoul (s, NULL, 16); ++ char *end; ++ ++ addr = simple_strtoul (s, &end, 16); ++ if (*end) { ++ run_command(s, 0); ++ return video_fb_address; ++ } + + if (video_display_bitmap (addr, 0, 0) == 0) { + return ((void *) (video_fb_address)); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-neo1973.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-neo1973.patch new file mode 100644 index 0000000000..7c70244b38 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-neo1973.patch @@ -0,0 +1,2248 @@ +This patch adds neo1973 'board' (FIC Neo1973 phone) support to u-boot. +Specifically, it adds support for the GTA01v3, GTA01v4, GTA01Bv2 and +GTA01Bv3 hardware revisions. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2009,6 +2009,14 @@ + sbc2410x_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + ++gta01_config \ ++gta01v3_config \ ++gta01bv2_config \ ++gta01bv3_config \ ++gta01bv4_config \ ++gta01v4_config : unconfig ++ @sh board/neo1973/gta01/split_by_variant.sh $@ ++ + qt2410_config : unconfig + @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 + +Index: u-boot/common/main.c +=================================================================== +--- u-boot.orig/common/main.c ++++ u-boot/common/main.c +@@ -61,6 +61,7 @@ + #undef DEBUG_PARSER + + char console_buffer[CFG_CBSIZE]; /* console I/O buffer */ ++int nobootdelay; + + #ifndef CONFIG_CMDLINE_EDITING + static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen); +@@ -376,7 +377,7 @@ + + debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>"); + +- if (bootdelay >= 0 && s && !abortboot (bootdelay)) { ++ if (!nobootdelay && bootdelay >= 0 && s && !abortboot (bootdelay)) { + # ifdef CONFIG_AUTOBOOT_KEYED + int prev = disable_ctrlc(1); /* disable Control C checking */ + # endif +Index: u-boot/drivers/Makefile +=================================================================== +--- u-boot.orig/drivers/Makefile ++++ u-boot/drivers/Makefile +@@ -50,6 +50,7 @@ + usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ + videomodes.o w83c553f.o \ + ks8695eth.o \ ++ pcf50606.o \ + pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ + rpx_pcmcia.o \ + fsl_i2c.o s3c2410_fb.o +Index: u-boot/drivers/pcf50606.c +=================================================================== +--- /dev/null ++++ u-boot/drivers/pcf50606.c +@@ -0,0 +1,112 @@ ++ ++#include <common.h> ++ ++#ifdef CONFIG_DRIVER_PCF50606 ++ ++#include <i2c.h> ++#include <pcf50606.h> ++#include <asm/atomic.h> ++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) ++ ++#define PCF50606_I2C_ADDR 0x08 ++ ++void __pcf50606_reg_write(u_int8_t reg, u_int8_t val) ++{ ++ i2c_write(PCF50606_I2C_ADDR, reg, 1, &val, 1); ++} ++ ++u_int8_t __pcf50606_reg_read(u_int8_t reg) ++{ ++ u_int8_t tmp; ++ i2c_read(PCF50606_I2C_ADDR, reg, 1, &tmp, 1); ++ return tmp; ++} ++ ++void pcf50606_reg_write(u_int8_t reg, u_int8_t val) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ __pcf50606_reg_write(reg, val); ++ local_irq_restore(flags); ++} ++ ++u_int8_t pcf50606_reg_read(u_int8_t reg) ++{ ++ unsigned long flags; ++ u_int8_t tmp; ++ ++ local_irq_save(flags); ++ tmp = __pcf50606_reg_read(reg); ++ local_irq_restore(flags); ++ ++ return tmp; ++} ++ ++void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val) ++{ ++ unsigned long flags; ++ u_int8_t tmp; ++ ++ local_irq_save(flags); ++ tmp = __pcf50606_reg_read(reg); ++ __pcf50606_reg_write(reg, (val & mask) | (tmp & ~mask)); ++ local_irq_restore(flags); ++} ++ ++void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits) ++{ ++ unsigned long flags; ++ u_int8_t tmp; ++ ++ local_irq_save(flags); ++ tmp = pcf50606_reg_read(reg); ++ pcf50606_reg_write(reg, (tmp & ~bits)); ++ local_irq_restore(flags); ++} ++ ++static const u_int8_t regs_valid[] = { ++ PCF50606_REG_OOCS, PCF50606_REG_INT1M, PCF50606_REG_INT2M, ++ PCF50606_REG_INT3M, PCF50606_REG_OOCC1, PCF50606_REG_OOCC2, ++ PCF50606_REG_PSSC, PCF50606_REG_PWROKM, PCF50606_REG_DCDC1, ++ PCF50606_REG_DCDC2, PCF50606_REG_DCDC3, PCF50606_REG_DCDC4, ++ PCF50606_REG_DCDEC1, PCF50606_REG_DCDEC2, PCF50606_REG_DCUDC1, ++ PCF50606_REG_DCUDC2, PCF50606_REG_IOREGC, PCF50606_REG_D1REGC1, ++ PCF50606_REG_D2REGC1, PCF50606_REG_D3REGC1, PCF50606_REG_LPREGC1, ++ PCF50606_REG_LPREGC2, PCF50606_REG_MBCC1, PCF50606_REG_MBCC2, ++ PCF50606_REG_MBCC3, PCF50606_REG_BBCC, PCF50606_REG_ADCC1, ++ PCF50606_REG_ADCC2, PCF50606_REG_ACDC1, PCF50606_REG_BVMC, ++ PCF50606_REG_PWMC1, PCF50606_REG_LEDC1, PCF50606_REG_LEDC2, ++ PCF50606_REG_GPOC1, PCF50606_REG_GPOC2, PCF50606_REG_GPOC3, ++ PCF50606_REG_GPOC4, PCF50606_REG_GPOC5, ++}; ++ ++ ++/* initialize PCF50606 register set */ ++void pcf50606_init(void) ++{ ++ unsigned long flags; ++ int i; ++ ++ local_irq_save(flags); ++ for (i = 0; i < ARRAY_SIZE(regs_valid); i++) { ++ __pcf50606_reg_write(regs_valid[i], ++ pcf50606_initial_regs[regs_valid[i]]); ++ } ++ local_irq_restore(flags); ++} ++ ++void pcf50606_charge_autofast(int on) ++{ ++ if (on) { ++ printf("Enabling automatic fast charge\n"); ++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, ++ PCF50606_MBCC1_AUTOFST, ++ PCF50606_MBCC1_AUTOFST); ++ } else { ++ printf("Disabling fast charge\n"); ++ pcf50606_reg_write(PCF50606_REG_MBCC1, 0x00); ++ } ++} ++ ++#endif /* CONFIG DRIVER_PCF50606 */ +Index: u-boot/include/pcf50606.h +=================================================================== +--- /dev/null ++++ u-boot/include/pcf50606.h +@@ -0,0 +1,273 @@ ++#ifndef _PCF50606_H ++#define _PCF50606_H ++ ++/* Philips PCF50606 Power Managemnt Unit (PMU) driver ++ * (C) 2006-2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ */ ++ ++enum pfc50606_regs { ++ PCF50606_REG_ID = 0x00, ++ PCF50606_REG_OOCS = 0x01, ++ PCF50606_REG_INT1 = 0x02, /* Interrupt Status */ ++ PCF50606_REG_INT2 = 0x03, /* Interrupt Status */ ++ PCF50606_REG_INT3 = 0x04, /* Interrupt Status */ ++ PCF50606_REG_INT1M = 0x05, /* Interrupt Mask */ ++ PCF50606_REG_INT2M = 0x06, /* Interrupt Mask */ ++ PCF50606_REG_INT3M = 0x07, /* Interrupt Mask */ ++ PCF50606_REG_OOCC1 = 0x08, ++ PCF50606_REG_OOCC2 = 0x09, ++ PCF50606_REG_RTCSC = 0x0a, /* Second */ ++ PCF50606_REG_RTCMN = 0x0b, /* Minute */ ++ PCF50606_REG_RTCHR = 0x0c, /* Hour */ ++ PCF50606_REG_RTCWD = 0x0d, /* Weekday */ ++ PCF50606_REG_RTCDT = 0x0e, /* Day */ ++ PCF50606_REG_RTCMT = 0x0f, /* Month */ ++ PCF50606_REG_RTCYR = 0x10, /* Year */ ++ PCF50606_REG_RTCSCA = 0x11, /* Alarm Second */ ++ PCF50606_REG_RTCMNA = 0x12, /* Alarm Minute */ ++ PCF50606_REG_RTCHRA = 0x13, /* Alarm Hour */ ++ PCF50606_REG_RTCWDA = 0x14, /* Alarm Weekday */ ++ PCF50606_REG_RTCDTA = 0x15, /* Alarm Day */ ++ PCF50606_REG_RTCMTA = 0x16, /* Alarm Month */ ++ PCF50606_REG_RTCYRA = 0x17, /* Alarm Year */ ++ PCF50606_REG_PSSC = 0x18, /* Power sequencing */ ++ PCF50606_REG_PWROKM = 0x19, /* PWROK mask */ ++ PCF50606_REG_PWROKS = 0x1a, /* PWROK status */ ++ PCF50606_REG_DCDC1 = 0x1b, ++ PCF50606_REG_DCDC2 = 0x1c, ++ PCF50606_REG_DCDC3 = 0x1d, ++ PCF50606_REG_DCDC4 = 0x1e, ++ PCF50606_REG_DCDEC1 = 0x1f, ++ PCF50606_REG_DCDEC2 = 0x20, ++ PCF50606_REG_DCUDC1 = 0x21, ++ PCF50606_REG_DCUDC2 = 0x22, ++ PCF50606_REG_IOREGC = 0x23, ++ PCF50606_REG_D1REGC1 = 0x24, ++ PCF50606_REG_D2REGC1 = 0x25, ++ PCF50606_REG_D3REGC1 = 0x26, ++ PCF50606_REG_LPREGC1 = 0x27, ++ PCF50606_REG_LPREGC2 = 0x28, ++ PCF50606_REG_MBCC1 = 0x29, ++ PCF50606_REG_MBCC2 = 0x2a, ++ PCF50606_REG_MBCC3 = 0x2b, ++ PCF50606_REG_MBCS1 = 0x2c, ++ PCF50606_REG_BBCC = 0x2d, ++ PCF50606_REG_ADCC1 = 0x2e, ++ PCF50606_REG_ADCC2 = 0x2f, ++ PCF50606_REG_ADCS1 = 0x30, ++ PCF50606_REG_ADCS2 = 0x31, ++ PCF50606_REG_ADCS3 = 0x32, ++ PCF50606_REG_ACDC1 = 0x33, ++ PCF50606_REG_BVMC = 0x34, ++ PCF50606_REG_PWMC1 = 0x35, ++ PCF50606_REG_LEDC1 = 0x36, ++ PCF50606_REG_LEDC2 = 0x37, ++ PCF50606_REG_GPOC1 = 0x38, ++ PCF50606_REG_GPOC2 = 0x39, ++ PCF50606_REG_GPOC3 = 0x3a, ++ PCF50606_REG_GPOC4 = 0x3b, ++ PCF50606_REG_GPOC5 = 0x3c, ++ __NUM_PCF50606_REGS ++}; ++ ++enum pcf50606_reg_oocs { ++ PFC50606_OOCS_ONKEY = 0x01, ++ PCF50606_OOCS_EXTON = 0x02, ++ PCF50606_OOCS_PWROKRST = 0x04, ++ PCF50606_OOCS_BATOK = 0x08, ++ PCF50606_OOCS_BACKOK = 0x10, ++ PCF50606_OOCS_CHGOK = 0x20, ++ PCF50606_OOCS_TEMPOK = 0x40, ++ PCF50606_OOCS_WDTEXP = 0x80, ++}; ++ ++enum pcf50606_reg_oocc1 { ++ PCF50606_OOCC1_GOSTDBY = 0x01, ++ PCF50606_OOCC1_TOTRST = 0x02, ++ PCF50606_OOCC1_CLK32ON = 0x04, ++ PCF50606_OOCC1_WDTRST = 0x08, ++ PCF50606_OOCC1_RTCWAK = 0x10, ++ PCF50606_OOCC1_CHGWAK = 0x20, ++ PCF50606_OOCC1_EXTONWAK_HIGH = 0x40, ++ PCF50606_OOCC1_EXTONWAK_LOW = 0x80, ++ PCF50606_OOCC1_EXTONWAK_NO_WAKEUP = 0x3f, ++}; ++ ++enum pcf50606_reg_oocc2 { ++ PCF50606_OOCC2_ONKEYDB_NONE = 0x00, ++ PCF50606_OOCC2_ONKEYDB_14ms = 0x01, ++ PCF50606_OOCC2_ONKEYDB_62ms = 0x02, ++ PCF50606_OOCC2_ONKEYDB_500ms = 0x03, ++ PCF50606_OOCC2_EXTONDB_NONE = 0x00, ++ PCF50606_OOCC2_EXTONDB_14ms = 0x04, ++ PCF50606_OOCC2_EXTONDB_62ms = 0x08, ++ PCF50606_OOCC2_EXTONDB_500ms = 0x0c, ++}; ++ ++enum pcf50606_reg_int1 { ++ PCF50606_INT1_ONKEYR = 0x01, /* ONKEY rising edge */ ++ PCF50606_INT1_ONKEYF = 0x02, /* ONKEY falling edge */ ++ PCF50606_INT1_ONKEY1S = 0x04, /* OMKEY at least 1sec low */ ++ PCF50606_INT1_EXTONR = 0x08, /* EXTON rising edge */ ++ PCF50606_INT1_EXTONF = 0x10, /* EXTON falling edge */ ++ PCF50606_INT1_SECOND = 0x40, /* RTC periodic second interrupt */ ++ PCF50606_INT1_ALARM = 0x80, /* RTC alarm time is reached */ ++}; ++ ++enum pcf50606_reg_int2 { ++ PCF50606_INT2_CHGINS = 0x01, /* Charger inserted */ ++ PCF50606_INT2_CHGRM = 0x02, /* Charger removed */ ++ PCF50606_INT2_CHGFOK = 0x04, /* Fast charging OK */ ++ PCF50606_INT2_CHGERR = 0x08, /* Error in charging mode */ ++ PCF50606_INT2_CHGFRDY = 0x10, /* Fast charge completed */ ++ PCF50606_INT2_CHGPROT = 0x20, /* Charging protection interrupt */ ++ PCF50606_INT2_CHGWD10S = 0x40, /* Charger watchdig expires in 10s */ ++ PCF50606_INT2_CHGWDEXP = 0x80, /* Charger watchdog expires */ ++}; ++ ++enum pcf50606_reg_int3 { ++ PCF50606_INT3_ADCRDY = 0x01, /* ADC conversion finished */ ++ PCF50606_INT3_ACDINS = 0x02, /* Accessory inserted */ ++ PCF50606_INT3_ACDREM = 0x04, /* Accessory removed */ ++ PCF50606_INT3_TSCPRES = 0x08, /* Touch screen pressed */ ++ PCF50606_INT3_LOWBAT = 0x40, /* Low battery voltage */ ++ PCF50606_INT3_HIGHTMP = 0x80, /* High temperature */ ++}; ++ ++/* used by PSSC, PWROKM, PWROKS, */ ++enum pcf50606_regu { ++ PCF50606_REGU_DCD = 0x01, /* DCD in phase 2 */ ++ PCF50606_REGU_DCDE = 0x02, /* DCDE in phase 2 */ ++ PCF50606_REGU_DCUD = 0x04, /* DCDU in phase 2 */ ++ PCF50606_REGU_IO = 0x08, /* IO in phase 2 */ ++ PCF50606_REGU_D1 = 0x10, /* D1 in phase 2 */ ++ PCF50606_REGU_D2 = 0x20, /* D2 in phase 2 */ ++ PCF50606_REGU_D3 = 0x40, /* D3 in phase 2 */ ++ PCF50606_REGU_LP = 0x80, /* LP in phase 2 */ ++}; ++ ++enum pcf50606_reg_dcdc4 { ++ PCF50606_DCDC4_MODE_AUTO = 0x00, ++ PCF50606_DCDC4_MODE_PWM = 0x01, ++ PCF50606_DCDC4_MODE_PCF = 0x02, ++ PCF50606_DCDC4_OFF_FLOAT = 0x00, ++ PCF50606_DCDC4_OFF_BYPASS = 0x04, ++ PCF50606_DCDC4_OFF_PULLDOWN = 0x08, ++ PCF50606_DCDC4_CURLIM_500mA = 0x00, ++ PCF50606_DCDC4_CURLIM_750mA = 0x10, ++ PCF50606_DCDC4_CURLIM_1000mA = 0x20, ++ PCF50606_DCDC4_CURLIM_1250mA = 0x30, ++ PCF50606_DCDC4_TOGGLE = 0x40, ++ PCF50606_DCDC4_REGSEL_DCDC2 = 0x80, ++}; ++ ++enum pcf50606_reg_dcdec2 { ++ PCF50606_DCDEC2_MODE_AUTO = 0x00, ++ PCF50606_DCDEC2_MODE_PWM = 0x01, ++ PCF50606_DCDEC2_MODE_PCF = 0x02, ++ PCF50606_DCDEC2_OFF_FLOAT = 0x00, ++ PCF50606_DCDEC2_OFF_BYPASS = 0x04, ++}; ++ ++enum pcf50606_reg_dcudc2 { ++ PCF50606_DCUDC2_MODE_AUTO = 0x00, ++ PCF50606_DCUDC2_MODE_PWM = 0x01, ++ PCF50606_DCUDC2_MODE_PCF = 0x02, ++ PCF50606_DCUDC2_OFF_FLOAT = 0x00, ++ PCF50606_DCUDC2_OFF_BYPASS = 0x04, ++}; ++ ++enum pcf50606_reg_adcc1 { ++ PCF50606_ADCC1_TSCMODACT = 0x01, ++ PCF50606_ADCC1_TSCMODSTB = 0x02, ++ PCF50606_ADCC1_TRATSET = 0x04, ++ PCF50606_ADCC1_NTCSWAPE = 0x08, ++ PCF50606_ADCC1_NTCSWAOFF = 0x10, ++ PCF50606_ADCC1_EXTSYNCBREAK = 0x20, ++ /* reserved */ ++ PCF50606_ADCC1_TSCINT = 0x80, ++}; ++ ++enum pcf50606_reg_adcc2 { ++ PCF50606_ADCC2_ADCSTART = 0x01, ++ /* see enum pcf50606_adcc2_adcmux */ ++ PCF50606_ADCC2_SYNC_NONE = 0x00, ++ PCF50606_ADCC2_SYNC_TXON = 0x20, ++ PCF50606_ADCC2_SYNC_PWREN1 = 0x40, ++ PCF50606_ADCC2_SYNC_PWREN2 = 0x60, ++ PCF50606_ADCC2_RES_10BIT = 0x00, ++ PCF50606_ADCC2_RES_8BIT = 0x80, ++}; ++ ++#define PCF50606_ADCC2_ADCMUX_MASK (0xf << 1) ++ ++#define ADCMUX_SHIFT 1 ++enum pcf50606_adcc2_adcmux { ++ PCF50606_ADCMUX_BATVOLT_RES = 0x0 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_BATVOLT_SUBTR = 0x1 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_ADCIN1_RES = 0x2 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_ADCIN1_SUBTR = 0x3 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_BATTEMP = 0x4 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_ADCIN2 = 0x5 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_ADCIN3 = 0x6 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_ADCIN3_RATIO = 0x7 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_XPOS = 0x8 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_YPOS = 0x9 << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_P1 = 0xa << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_P2 = 0xb << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_BATVOLT_ADCIN1 = 0xc << ADCMUX_SHIFT, ++ PCF50606_ADCMUX_XY_SEQUENCE = 0xe << ADCMUX_SHIFT, ++ PCF50606_P1_P2_RESISTANCE = 0xf << ADCMUX_SHIFT, ++}; ++ ++enum pcf50606_adcs2 { ++ PCF50606_ADCS2_ADCRDY = 0x80, ++}; ++ ++enum pcf50606_reg_mbcc1 { ++ PCF50606_MBCC1_CHGAPE = 0x01, ++ PCF50606_MBCC1_AUTOFST = 0x02, ++#define PCF50606_MBCC1_CHGMOD_MASK 0x1c ++#define PCF50606_MBCC1_CHGMOD_SHIFT 2 ++ PCF50606_MBCC1_CHGMOD_QUAL = 0x00, ++ PCF50606_MBCC1_CHGMOD_PRE = 0x04, ++ PCF50606_MBCC1_CHGMOD_TRICKLE = 0x08, ++ PCF50606_MBCC1_CHGMOD_FAST_CCCV = 0x0c, ++ PCF50606_MBCC1_CHGMOD_FAST_NOCC = 0x10, ++ PCF50606_MBCC1_CHGMOD_FAST_NOCV = 0x14, ++ PCF50606_MBCC1_CHGMOD_FAST_SW = 0x18, ++ PCF50606_MBCC1_CHGMOD_IDLE = 0x1c, ++ PCF50606_MBCC1_DETMOD_LOWCHG = 0x20, ++ PCF50606_MBCC1_DETMOD_WDRST = 0x40, ++}; ++ ++enum pcf50606_reg_bvmc { ++ PCF50606_BVMC_LOWBAT = 0x01, ++ PCF50606_BVMC_THRSHLD_NULL = 0x00, ++ PCF50606_BVMC_THRSHLD_2V8 = 0x02, ++ PCF50606_BVMC_THRSHLD_2V9 = 0x04, ++ PCF50606_BVMC_THRSHLD_3V = 0x08, ++ PCF50606_BVMC_THRSHLD_3V1 = 0x08, ++ PCF50606_BVMC_THRSHLD_3V2 = 0x0a, ++ PCF50606_BVMC_THRSHLD_3V3 = 0x0c, ++ PCF50606_BVMC_THRSHLD_3V4 = 0x0e, ++ PCF50606_BVMC_DISDB = 0x10, ++}; ++ ++/* this is to be provided by the board implementation */ ++extern const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS]; ++ ++void pcf50606_reg_write(u_int8_t reg, u_int8_t val); ++ ++u_int8_t pcf50606_reg_read(u_int8_t reg); ++ ++void pcf50606_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val); ++void pcf50606_reg_clear_bits(u_int8_t reg, u_int8_t bits); ++ ++void pcf50606_init(void); ++void pcf50606_charge_autofast(int on); ++ ++#endif /* _PCF50606_H */ ++ +Index: u-boot/board/neo1973/common/cmd_neo1973.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/cmd_neo1973.c +@@ -0,0 +1,99 @@ ++/* ++ * (C) Copyright 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * Boot support ++ */ ++#include <common.h> ++#include <command.h> ++#include <net.h> /* for print_IPaddr */ ++#include <s3c2410.h> ++ ++#include "neo1973.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if (CONFIG_COMMANDS & CFG_CMD_BDI) ++ ++int do_neo1973 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ int i; ++ ++ if (!strcmp(argv[1], "info")) { ++ printf("FIC Neo1973 Hardware Revision 0x%04x\n", get_board_rev()); ++ } else if (!strcmp(argv[1], "power-off")) { ++ neo1973_poweroff(); ++ } else if (!strcmp(argv[1], "charger") || !strcmp(argv[1], "charge")) { ++ if (argc < 3) ++ goto out_help; ++ if (!strcmp(argv[2], "status") || !strcmp(argv[2], "state")) { ++ printf("%s\n", neo1973_get_charge_status()); ++ } else if (!strcmp(argv[2], "autofast")) { ++ neo1973_set_charge_mode(NEO1973_CHGCMD_AUTOFAST); ++ } else if (!strcmp(argv[2], "!autofast")) { ++ neo1973_set_charge_mode(NEO1973_CHGCMD_NO_AUTOFAST); ++ } else if (!strcmp(argv[2], "off")) { ++ neo1973_set_charge_mode(NEO1973_CHGCMD_OFF); ++ } else if (!strcmp(argv[2], "fast")) { ++ neo1973_set_charge_mode(NEO1973_CHGCMD_FAST); ++ } else ++ goto out_help; ++ } else if (!strcmp(argv[1], "backlight")) { ++ if (argc < 3) ++ goto out_help; ++ if (!strcmp(argv[2], "on")) ++ neo1973_backlight(1); ++ else ++ neo1973_backlight(0); ++ } else if (!strcmp(argv[1], "vibrator")) { ++ if (argc < 3) ++ goto out_help; ++ if (!strcmp(argv[2], "on")) ++ neo1973_vibrator(1); ++ else ++ neo1973_vibrator(0); ++ } else { ++out_help: ++ printf("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/* -------------------------------------------------------------------- */ ++ ++U_BOOT_CMD( ++ neo1973, 4, 1, do_neo1973, ++ "neo1973 - phone specific commands\n", ++ "neo1973 info - display phone informantion\n" ++ "neo1973 power-off - switch off the phone\n" ++ "neo1973 charger status - display charger status\n" ++ "neo1973 charger autofast - enable automatic fast (500mA) charging\n" ++ "neo1973 charger !autofast - disable automatic fast (500mA) charging\n" ++ "neo1973 charger fast - enable fast (500mA) charging\n" ++ "neo1973 charger off - disable charging\n" ++ "neo1973 backlight (on|off) - switch backlight on or off\n" ++ "neo1973 vibrator (on|off) - switch vibrator on or off\n" ++); ++#endif /* CFG_CMD_BDI */ +Index: u-boot/board/neo1973/common/jbt6k74.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/jbt6k74.c +@@ -0,0 +1,420 @@ ++/* u-boot driver for the tpo JBT6K74-AS LCM ASIC ++ * ++ * Copyright (C) 2006-2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ */ ++#include <common.h> ++#include <spi.h> ++#include <video_fb.h> ++#include <asm/errno.h> ++#include <s3c2410.h> ++#include "jbt6k74.h" ++ ++#if 0 ++#define DEBUGP(x, args...) printf("%s: " x, __FUNCTION__, ## args); ++#define DEBUGPC(x, args...) printf(x, ## args); ++#else ++#define DEBUGP(x, args...) do { } while (0) ++#define DEBUGPC(x, args...) do { } while (0) ++#endif ++ ++ ++enum jbt_register { ++ JBT_REG_SLEEP_IN = 0x10, ++ JBT_REG_SLEEP_OUT = 0x11, ++ ++ JBT_REG_DISPLAY_OFF = 0x28, ++ JBT_REG_DISPLAY_ON = 0x29, ++ ++ JBT_REG_RGB_FORMAT = 0x3a, ++ JBT_REG_QUAD_RATE = 0x3b, ++ ++ JBT_REG_POWER_ON_OFF = 0xb0, ++ JBT_REG_BOOSTER_OP = 0xb1, ++ JBT_REG_BOOSTER_MODE = 0xb2, ++ JBT_REG_BOOSTER_FREQ = 0xb3, ++ JBT_REG_OPAMP_SYSCLK = 0xb4, ++ JBT_REG_VSC_VOLTAGE = 0xb5, ++ JBT_REG_VCOM_VOLTAGE = 0xb6, ++ JBT_REG_EXT_DISPL = 0xb7, ++ JBT_REG_OUTPUT_CONTROL = 0xb8, ++ JBT_REG_DCCLK_DCEV = 0xb9, ++ JBT_REG_DISPLAY_MODE1 = 0xba, ++ JBT_REG_DISPLAY_MODE2 = 0xbb, ++ JBT_REG_DISPLAY_MODE = 0xbc, ++ JBT_REG_ASW_SLEW = 0xbd, ++ JBT_REG_DUMMY_DISPLAY = 0xbe, ++ JBT_REG_DRIVE_SYSTEM = 0xbf, ++ ++ JBT_REG_SLEEP_OUT_FR_A = 0xc0, ++ JBT_REG_SLEEP_OUT_FR_B = 0xc1, ++ JBT_REG_SLEEP_OUT_FR_C = 0xc2, ++ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3, ++ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4, ++ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5, ++ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6, ++ ++ JBT_REG_GAMMA1_FINE_1 = 0xc7, ++ JBT_REG_GAMMA1_FINE_2 = 0xc8, ++ JBT_REG_GAMMA1_INCLINATION = 0xc9, ++ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca, ++ ++ JBT_REG_BLANK_CONTROL = 0xcf, ++ JBT_REG_BLANK_TH_TV = 0xd0, ++ JBT_REG_CKV_ON_OFF = 0xd1, ++ JBT_REG_CKV_1_2 = 0xd2, ++ JBT_REG_OEV_TIMING = 0xd3, ++ JBT_REG_ASW_TIMING_1 = 0xd4, ++ JBT_REG_ASW_TIMING_2 = 0xd5, ++ ++ JBT_REG_HCLOCK_VGA = 0xec, ++ JBT_REG_HCLOCK_QVGA = 0xed, ++ ++}; ++ ++static const char *jbt_state_names[] = { ++ [JBT_STATE_DEEP_STANDBY] = "deep-standby", ++ [JBT_STATE_SLEEP] = "sleep", ++ [JBT_STATE_NORMAL] = "normal", ++}; ++ ++#define GTA01_SCLK (1 << 7) /* GPG7 */ ++#define GTA01_MOSI (1 << 6) /* GPG6 */ ++#define GTA01_MISO (1 << 5) /* GPG5 */ ++#define GTA01_CS (1 << 3) /* GPG3 */ ++ ++#define SPI_READ ((immr->GPGDAT & GTA01_MISO) != 0) ++ ++#define SPI_CS(bit) if (bit) gpio->GPGDAT |= GTA01_CS; \ ++ else gpio->GPGDAT &= ~GTA01_CS ++ ++#define SPI_SDA(bit) if (bit) gpio->GPGDAT |= GTA01_MOSI; \ ++ else gpio->GPGDAT &= ~GTA01_MOSI ++ ++#define SPI_SCL(bit) if (bit) gpio->GPGDAT |= GTA01_SCLK; \ ++ else gpio->GPGDAT &= ~GTA01_SCLK ++ ++/* 150uS minimum clock cycle, we have two of this plus our other ++ * instructions */ ++#define SPI_DELAY udelay(100) /* 200uS */ ++ ++ ++#define JBT_TX_BUF_SIZE ++struct jbt_info { ++ enum jbt_state state; ++ u_int16_t tx_buf[4]; ++ struct spi_device *spi_dev; ++}; ++ ++static struct jbt_info _jbt, *jbt = &_jbt; ++ ++static int jbt_spi_xfer(int wordnum, int bitlen, u_int16_t *dout) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ u_int16_t tmpdout = 0; ++ int i, j; ++ ++ DEBUGP("spi_xfer: dout %08X wordnum %u bitlen %d\n", ++ *(uint *)dout, wordnum, bitlen); ++ ++ SPI_CS(0); ++ ++ for (i = 0; i < wordnum; i ++) { ++ tmpdout = dout[i]; ++ ++ for (j = 0; j < bitlen; j++) { ++ SPI_SCL(0); ++ if (tmpdout & (1 << bitlen-1)) { ++ SPI_SDA(1); ++ DEBUGPC("1"); ++ } else { ++ SPI_SDA(0); ++ DEBUGPC("0"); ++ } ++ SPI_DELAY; ++ SPI_SCL(1); ++ SPI_DELAY; ++ tmpdout <<= 1; ++ } ++ DEBUGPC(" "); ++ } ++ DEBUGPC("\n"); ++ ++ SPI_CS(1); ++ ++ return 0; ++} ++ ++#define JBT_COMMAND 0x000 ++#define JBT_DATA 0x100 ++ ++static int jbt_reg_write_nodata(struct jbt_info *jbt, u_int8_t reg) ++{ ++ int rc; ++ ++ jbt->tx_buf[0] = JBT_COMMAND | reg; ++ ++ rc = jbt_spi_xfer(1, 9, jbt->tx_buf); ++ ++ return rc; ++} ++ ++ ++static int jbt_reg_write(struct jbt_info *jbt, u_int8_t reg, u_int8_t data) ++{ ++ int rc; ++ ++ jbt->tx_buf[0] = JBT_COMMAND | reg; ++ jbt->tx_buf[1] = JBT_DATA | data; ++ ++ rc = jbt_spi_xfer(2, 9, jbt->tx_buf); ++ ++ return rc; ++} ++ ++static int jbt_reg_write16(struct jbt_info *jbt, u_int8_t reg, u_int16_t data) ++{ ++ int rc; ++ ++ jbt->tx_buf[0] = JBT_COMMAND | reg; ++ jbt->tx_buf[1] = JBT_DATA | (data >> 8); ++ jbt->tx_buf[2] = JBT_DATA | (data & 0xff); ++ ++ rc = jbt_spi_xfer(3, 9, jbt->tx_buf); ++ ++ return rc; ++} ++ ++static int jbt_init_regs(struct jbt_info *jbt) ++{ ++ int rc; ++ ++ DEBUGP("entering\n"); ++ ++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01); ++ rc |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00); ++ rc |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60); ++ rc |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10); ++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56); ++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33); ++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11); ++ rc |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11); ++ rc |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02); ++ rc |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b); ++ rc |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40); ++ rc |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03); ++ rc |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04); ++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x02); ++ rc |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00); ++ ++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11); ++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11); ++ rc |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11); ++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040); ++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0); ++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020); ++ rc |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0); ++ ++ rc |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533); ++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00); ++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00); ++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); ++ rc |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); ++ ++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0); ++ rc |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02); ++ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804); ++ rc |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804); ++ ++ rc |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01); ++ rc |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000); ++ ++ rc |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e); ++ rc |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4); ++ rc |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e); ++ ++#if 0 ++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff); ++ rc |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff); ++#endif ++ ++ return rc; ++} ++ ++static int standby_to_sleep(struct jbt_info *jbt) ++{ ++ int rc; ++ ++ DEBUGP("entering\n"); ++ ++ /* three times command zero */ ++ rc = jbt_reg_write_nodata(jbt, 0x00); ++ udelay(1000); ++ rc = jbt_reg_write_nodata(jbt, 0x00); ++ udelay(1000); ++ rc = jbt_reg_write_nodata(jbt, 0x00); ++ udelay(1000); ++ ++ /* deep standby out */ ++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x17); ++ ++ return rc; ++} ++ ++static int sleep_to_normal(struct jbt_info *jbt) ++{ ++ int rc; ++ DEBUGP("entering\n"); ++ ++ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */ ++ rc = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80); ++ ++ /* Quad mode off */ ++ rc |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00); ++ ++ /* AVDD on, XVDD on */ ++ rc |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16); ++ ++ /* Output control */ ++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xfff9); ++ ++ /* Sleep mode off */ ++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT); ++ ++ /* initialize register set */ ++ rc |= jbt_init_regs(jbt); ++ return rc; ++} ++ ++static int normal_to_sleep(struct jbt_info *jbt) ++{ ++ int rc; ++ DEBUGP("entering\n"); ++ ++ rc = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF); ++ rc |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8002); ++ rc |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN); ++ ++ return rc; ++} ++ ++static int sleep_to_standby(struct jbt_info *jbt) ++{ ++ DEBUGP("entering\n"); ++ return jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00); ++} ++ ++/* frontend function */ ++int jbt6k74_enter_state(enum jbt_state new_state) ++{ ++ int rc = -EINVAL; ++ ++ DEBUGP("entering(old_state=%u, new_state=%u)\n", jbt->state, new_state); ++ ++ switch (jbt->state) { ++ case JBT_STATE_DEEP_STANDBY: ++ switch (new_state) { ++ case JBT_STATE_DEEP_STANDBY: ++ rc = 0; ++ break; ++ case JBT_STATE_SLEEP: ++ rc = standby_to_sleep(jbt); ++ break; ++ case JBT_STATE_NORMAL: ++ /* first transition into sleep */ ++ rc = standby_to_sleep(jbt); ++ /* then transition into normal */ ++ rc |= sleep_to_normal(jbt); ++ break; ++ } ++ break; ++ case JBT_STATE_SLEEP: ++ switch (new_state) { ++ case JBT_STATE_SLEEP: ++ rc = 0; ++ break; ++ case JBT_STATE_DEEP_STANDBY: ++ rc = sleep_to_standby(jbt); ++ break; ++ case JBT_STATE_NORMAL: ++ rc = sleep_to_normal(jbt); ++ break; ++ } ++ break; ++ case JBT_STATE_NORMAL: ++ switch (new_state) { ++ case JBT_STATE_NORMAL: ++ rc = 0; ++ break; ++ case JBT_STATE_DEEP_STANDBY: ++ /* first transition into sleep */ ++ rc = normal_to_sleep(jbt); ++ /* then transition into deep standby */ ++ rc |= sleep_to_standby(jbt); ++ break; ++ case JBT_STATE_SLEEP: ++ rc = normal_to_sleep(jbt); ++ break; ++ } ++ break; ++ } ++ ++ return rc; ++} ++ ++int jbt6k74_display_onoff(int on) ++{ ++ DEBUGP("entering\n"); ++ if (on) ++ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON); ++ else ++ return jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF); ++} ++ ++int jbt6k74_init(void) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* initialize SPI for GPIO bitbang */ ++ gpio->GPGCON &= 0xffff033f; ++ gpio->GPGCON |= 0x00005440; ++ ++ /* get LCM out of reset */ ++ gpio->GPCDAT |= (1 << 6); ++ ++ /* according to data sheet: wait 50ms (Tpos of LCM). However, 50ms ++ * seems unreliable with later LCM batches, increasing to 90ms */ ++ udelay(90000); ++ ++ return 0; ++} ++ ++void board_video_init(GraphicDevice *pGD) ++{ ++ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); ++ ++ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */ ++ ++ lcd->LCDCON2 = 0x019fc3c1; ++ lcd->LCDCON3 = 0x0039df67; ++ lcd->LCDCON4 = 0x00000007; ++ lcd->LCDCON5 = 0x0001cf09; ++ lcd->LPCSEL = 0x00000000; ++} +Index: u-boot/board/neo1973/common/jbt6k74.h +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/jbt6k74.h +@@ -0,0 +1,14 @@ ++#ifndef _JBT6K74_H ++#define _JBT6K74_H ++ ++enum jbt_state { ++ JBT_STATE_DEEP_STANDBY, ++ JBT_STATE_SLEEP, ++ JBT_STATE_NORMAL, ++}; ++ ++int jbt6k74_init(void); ++int jbt6k74_display_onoff(int on); ++int jbt6k74_enter_state(enum jbt_state new_state); ++ ++#endif +Index: u-boot/board/neo1973/common/lowlevel_init.S +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/lowlevel_init.S +@@ -0,0 +1,187 @@ ++/* ++ * Memory Setup stuff - taken from blob memsetup.S ++ * ++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and ++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) ++ * ++ * Modified for the FIC Neo1973 GTA01 by Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <config.h> ++#include <version.h> ++ ++ ++/* some parameters for the board */ ++ ++/* ++ * ++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S ++ * ++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> ++ * ++ */ ++ ++#define BWSCON 0x48000000 ++ ++/* BWSCON */ ++#define DW8 (0x0) ++#define DW16 (0x1) ++#define DW32 (0x2) ++#define WAIT (0x1<<2) ++#define UBLB (0x1<<3) ++ ++#define B1_BWSCON (DW32) ++#define B2_BWSCON (DW16) ++#define B3_BWSCON (DW16 + WAIT + UBLB) ++#define B4_BWSCON (DW16) ++#define B5_BWSCON (DW16) ++#define B6_BWSCON (DW32) ++#define B7_BWSCON (DW32) ++ ++/* BANK0CON */ ++#define B0_Tacs 0x0 /* 0clk */ ++#define B0_Tcos 0x0 /* 0clk */ ++#define B0_Tacc 0x7 /* 14clk */ ++#define B0_Tcoh 0x0 /* 0clk */ ++#define B0_Tah 0x0 /* 0clk */ ++#define B0_Tacp 0x0 ++#define B0_PMC 0x0 /* normal */ ++ ++/* BANK1CON */ ++#define B1_Tacs 0x0 /* 0clk */ ++#define B1_Tcos 0x0 /* 0clk */ ++#define B1_Tacc 0x7 /* 14clk */ ++#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tah 0x0 /* 0clk */ ++#define B1_Tacp 0x0 ++#define B1_PMC 0x0 ++ ++#define B2_Tacs 0x0 ++#define B2_Tcos 0x0 ++#define B2_Tacc 0x7 ++#define B2_Tcoh 0x0 ++#define B2_Tah 0x0 ++#define B2_Tacp 0x0 ++#define B2_PMC 0x0 ++ ++#define B3_Tacs 0x0 /* 0clk */ ++#define B3_Tcos 0x3 /* 4clk */ ++#define B3_Tacc 0x7 /* 14clk */ ++#define B3_Tcoh 0x1 /* 1clk */ ++#define B3_Tah 0x0 /* 0clk */ ++#define B3_Tacp 0x3 /* 6clk */ ++#define B3_PMC 0x0 /* normal */ ++ ++#define B4_Tacs 0x0 /* 0clk */ ++#define B4_Tcos 0x0 /* 0clk */ ++#define B4_Tacc 0x7 /* 14clk */ ++#define B4_Tcoh 0x0 /* 0clk */ ++#define B4_Tah 0x0 /* 0clk */ ++#define B4_Tacp 0x0 ++#define B4_PMC 0x0 /* normal */ ++ ++#define B5_Tacs 0x0 /* 0clk */ ++#define B5_Tcos 0x0 /* 0clk */ ++#define B5_Tacc 0x7 /* 14clk */ ++#define B5_Tcoh 0x0 /* 0clk */ ++#define B5_Tah 0x0 /* 0clk */ ++#define B5_Tacp 0x0 ++#define B5_PMC 0x0 /* normal */ ++ ++#define B6_MT 0x3 /* SDRAM */ ++#define B6_Trcd 0x1 /* 3clk */ ++#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++#define B6_SCAN 0x1 /* 9bit */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ ++ defined(CONFIG_ARCH_GTA01B_v4) ++#define B6_SCAN 0x2 /* 10bit */ ++#endif ++ ++#define B7_MT 0x3 /* SDRAM */ ++#define B7_Trcd 0x1 /* 3clk */ ++#define B7_SCAN 0x2 /* 10bit */ ++ ++/* REFRESH parameter */ ++#define REFEN 0x1 /* Refresh enable */ ++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ ++#define Trp 0x1 /* 3clk */ ++#define Trc 0x3 /* 7clk */ ++#define Tchr 0x2 /* 3clk */ ++//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ ++#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ ++/**************************************/ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl lowlevel_init ++lowlevel_init: ++ /* memory control configuration */ ++ /* make r0 relative the current location so that it */ ++ /* reads SMRDATA out of FLASH rather than memory ! */ ++ adr r0, SMRDATA ++ ldr r1, =BWSCON /* Bus Width Status Controller */ ++ add r2, r0, #13*4 ++0: ++ ldr r3, [r0], #4 ++ str r3, [r1], #4 ++ cmp r2, r0 ++ bne 0b ++ ++ /* setup asynchronous bus mode */ ++ mrc p15, 0, r1 ,c1 ,c0, 0 ++ orr r1, r1, #0xc0000000 ++ mcr p15, 0, r1, c1, c0, 0 ++ ++#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ /* switch on power for NAND */ ++ ldr r0, =0x56000010 /* GPBCON */ ++ ldr r1, [r0] ++ orr r1, r1, #0x10 ++ str r1, [r0] ++ ++ ldr r0, =0x56000014 /* GPBDAT */ ++ ldr r1, [r0] ++ orr r1, r1, #(1 <<2) ++ str r1, [r0] ++#endif ++ ++ /* everything is fine now */ ++ mov pc, lr ++ ++ .ltorg ++/* the literal pools origin */ ++ ++SMRDATA: ++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) ++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) ++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) ++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) ++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) ++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) ++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) ++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) ++ .word 0xb2 ++ .word 0x30 ++ .word 0x30 +Index: u-boot/board/neo1973/gta01/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/Makefile +@@ -0,0 +1,47 @@ ++# ++# (C) Copyright 2000, 2001, 2002 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ++SOBJS := ../common/lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +Index: u-boot/board/neo1973/gta01/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/config.mk +@@ -0,0 +1,34 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++# GTA01v3 has 1 bank of 64 MB SDRAM ++# GTA01v4 has 1 bank of 64 MB SDRAM ++# ++# 3000'0000 to 3400'0000 ++# we load ourself to 33F8'0000 ++# ++# GTA01Bv2 or later has 1 bank of 128 MB SDRAM ++# ++# 3000'0000 to 3800'0000 ++# we load ourself to 37F8'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# download area is 3200'0000 or 3300'0000 ++ ++sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ++ ++ifeq ($(GTA01_BIG_RAM),y) ++# FIXME: TEXT_BASE = 0x37F80000 ++TEXT_BASE = 0x33F80000 ++else ++TEXT_BASE = 0x33F80000 ++endif +Index: u-boot/board/neo1973/gta01/gta01.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/gta01.c +@@ -0,0 +1,422 @@ ++/* ++ * (C) 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on existing S3C2410 startup code in u-boot: ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <s3c2410.h> ++#include <i2c.h> ++ ++#include "pcf50606.h" ++ ++#include "../common/neo1973.h" ++#include "../common/jbt6k74.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* That many seconds the power key needs to be pressed to power up */ ++#define POWER_KEY_SECONDS 2 ++ ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ ++//#define M_PDIV 0x3 ++//#define M_SDIV 0x1 ++#define M_MDIV 0x90 /* Fout = 202.8MHz */ ++#define M_PDIV 0x7 ++#define M_SDIV 0x0 ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++/* In case the debug board is attached, we cannot go beyond 200 MHz */ ++#if 0 ++#define M_MDIV 0x7d /* Fout = 266MHz */ ++#define M_PDIV 0x1 ++#define M_SDIV 0x1 ++#else ++#define M_MDIV 0x90 /* Fout = 202.8MHz */ ++#define M_PDIV 0x7 ++#define M_SDIV 0x0 ++#endif ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++/* This board doesn't have bus lines at teh debug port, and we can go to 266 */ ++#define M_MDIV 0x7d /* Fout = 266MHz */ ++#define M_PDIV 0x1 ++#define M_SDIV 0x1 ++#else ++#error Please define GTA01 revision ++#endif ++ ++#define U_M_MDIV 0x78 ++#define U_M_PDIV 0x2 ++#define U_M_SDIV 0x3 ++ ++unsigned int neo1973_wakeup_cause; ++extern int nobootdelay; ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++#if defined(CONFIG_ARCH_GTA01_v3) ++ gpio->GPACON = 0x007FFFFF; ++ ++ gpio->GPBCON = 0x00005055; ++ gpio->GPBUP = 0x000007FF; ++ ++ gpio->GPCCON = 0xAAAA12A8; ++ gpio->GPCUP = 0x0000FFFF; ++ ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ ++ gpio->GPFCON = 0x00002AA9; ++ gpio->GPFUP = 0x000000FF; ++ ++ gpio->GPGCON = 0xA846F0C0; ++ gpio->GPGUP = 0x0000AFEF; ++ ++ gpio->GPHCON = 0x0008FAAA; ++ gpio->GPHUP = 0x000007FF; ++#elif defined(CONFIG_ARCH_GTA01_v4) ++ gpio->GPACON = 0x005E47FF; ++ ++ gpio->GPBCON = 0x00045015; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */ ++ ++ gpio->GPCCON = 0xAAAA12A9; ++ gpio->GPCUP = 0x0000FFFF; ++ ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ ++ gpio->GPECON = 0xA02AAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ ++ gpio->GPFCON = 0x0000aa09; ++ gpio->GPFUP = 0x000000FF; ++ ++ gpio->GPGCON = 0xFF40F0C1; ++ gpio->GPGUP = 0x0000AFEF; ++ ++ gpio->GPHCON = 0x0000FAAA; ++ gpio->GPHUP = 0x000007FF; ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ gpio->GPACON = 0x005E4FFF; ++ ++ gpio->GPBCON = 0x00145415; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (Flash power-up) */ ++ ++ gpio->GPCCON = 0xAAAA12A9; ++ gpio->GPCUP = 0x0000FFFF; ++ ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ ++ gpio->GPECON = 0xA02AAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ ++ gpio->GPFCON = 0x0000aa19; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */ ++ ++ gpio->GPGCON = 0xFF40F0C1; ++ gpio->GPGUP = 0x0000AFEF; ++ ++ gpio->GPHCON = 0x0000FAAA; ++ gpio->GPHUP = 0x000007FF; ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++ gpio->GPACON = 0x0005E0FFF; ++ gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */ ++ ++ gpio->GPBCON = 0x00045455; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPBDAT |= 0x4; /* Set GPB2 to high (SD power down) */ ++ ++ gpio->GPCCON = 0xAAAA12A9; ++ gpio->GPCUP = 0x0000FFFF; ++ ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ ++ gpio->GPFCON = 0x0000aa99; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */ ++ ++ gpio->GPGCON = 0xFF14F0F8; ++ gpio->GPGUP = 0x0000AFEF; ++ ++ gpio->GPHCON = 0x0000FAAA; ++ gpio->GPHUP = 0x000007FF; ++#else ++#error Please define GTA01 version ++#endif ++ ++ /* arch number of SMDK2410-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA01; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ unsigned char tmp; ++ char buf[32]; ++ ++ /* Initialize the Power Management Unit with a safe register set */ ++ pcf50606_init(); ++ ++ /* obtain wake-up reason, save INT1 in environment */ ++ tmp = pcf50606_reg_read(PCF50606_REG_INT1); ++ sprintf(buf, "0x%02x", tmp); ++ setenv("pcf50606_int1", buf); ++ ++ if (tmp & PCF50606_INT1_ALARM) { ++ /* we've been woken up by RTC alarm or charger insert, boot */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; ++ goto continue_boot; ++ } ++ if (tmp & PCF50606_INT1_EXTONR) { ++ neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; ++ } ++ ++ if (tmp & PCF50606_INT1_ONKEYF) { ++ int seconds = 0; ++ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; ++ /* we've been woken up by a falling edge of the onkey */ ++ ++ /* we can't just setenv(bootdelay,-1) because that would ++ * accidentially become permanent if the user does saveenv */ ++ if (neo1973_911_key_pressed()) ++ nobootdelay = 1; ++ ++ while (1) { ++ u_int8_t int1, oocs; ++ ++ oocs = pcf50606_reg_read(PCF50606_REG_OOCS); ++ if (oocs & PFC50606_OOCS_ONKEY) ++ break; ++ ++ int1 = pcf50606_reg_read(PCF50606_REG_INT1); ++ if (int1 & PCF50606_INT1_SECOND) ++ seconds++; ++ ++ if (seconds >= POWER_KEY_SECONDS) ++ goto continue_boot; ++ } ++ /* Power off if minimum number of seconds not reached */ ++ neo1973_poweroff(); ++ } ++ ++ /* if there's no other reason, must be regular reset */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; ++ ++continue_boot: ++ jbt6k74_init(); ++ jbt6k74_enter_state(JBT_STATE_NORMAL); ++ jbt6k74_display_onoff(1); ++ ++ /* issue a short pulse with the vibrator */ ++ neo1973_vibrator(1); ++ udelay(50000); ++ neo1973_vibrator(0); ++ ++ /* switch on the backlight */ ++ neo1973_backlight(1); ++ ++#if defined(CONFIG_ARCH_GTA01B_v4) ++ { ++ /* check if sd card is inserted, and power-up if it is */ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (!(gpio->GPFDAT & (1 << 5))) ++ gpio->GPBDAT &= ~(1 << 2); ++ } ++#endif ++ ++ return 0; ++} ++ ++int dram_init (void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++u_int32_t get_board_rev(void) ++{ ++#if defined(CONFIG_ARCH_GTA01_v3) ++ return 0x00000130; ++#elif defined(CONFIG_ARCH_GTA01_v4) ++ return 0x00000140; ++#elif defined(CONFIG_ARCH_GTA01B_v2) ++ return 0x00000220; ++#elif defined(CONFIG_ARCH_GTA01B_v3) ++ return 0x00000230; ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++ return 0x00000240; ++#endif ++} ++ ++void neo1973_poweroff(void) ++{ ++ serial_printf("poweroff\n"); ++ udc_disconnect(); ++ pcf50606_reg_write(PCF50606_REG_OOCC1, PCF50606_OOCC1_GOSTDBY); ++ /* don't return to caller */ ++ while (1) ; ++} ++ ++void neo1973_backlight(int on) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (on) ++ gpio->GPBDAT |= 0x01; ++ else ++ gpio->GPBDAT &= ~0x01; ++} ++ ++void neo1973_vibrator(int on) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (on) ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++ gpio->GPGDAT |= (1 << 11); /* GPG11 */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ gpio->GPBDAT |= (1 << 10); /* GPB10 */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++ gpio->GPBDAT |= (1 << 3); /* GPB3 */ ++#endif ++ else ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++ gpio->GPGDAT &= ~(1 << 11); /* GPG11 */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ gpio->GPBDAT &= ~(1 << 10); /* GPB10 */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++ gpio->GPBDAT &= ~(1 << 3); /* GPB3 */ ++#endif ++} ++ ++int neo1973_911_key_pressed(void) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (gpio->GPFDAT & (1 << 6)) ++ return 0; ++ return 1; ++} ++ ++static const char *chgstate_names[] = { ++ [PCF50606_MBCC1_CHGMOD_QUAL] = "qualification", ++ [PCF50606_MBCC1_CHGMOD_PRE] = "pre", ++ [PCF50606_MBCC1_CHGMOD_TRICKLE] = "trickle", ++ [PCF50606_MBCC1_CHGMOD_FAST_CCCV] = "fast_cccv", ++ [PCF50606_MBCC1_CHGMOD_FAST_NOCC] = "fast_nocc", ++ [PCF50606_MBCC1_CHGMOD_FAST_NOCV] = "fast_nocv", ++ [PCF50606_MBCC1_CHGMOD_FAST_SW] = "fast_switch", ++ [PCF50606_MBCC1_CHGMOD_IDLE] = "idle", ++}; ++ ++const char *neo1973_get_charge_status(void) ++{ ++ u_int8_t mbcc1 = pcf50606_reg_read(PCF50606_REG_MBCC1); ++ u_int8_t chgmod = (mbcc1 & PCF50606_MBCC1_CHGMOD_MASK); ++ return chgstate_names[chgmod]; ++} ++ ++int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd) ++{ ++ switch (cmd) { ++ case NEO1973_CHGCMD_NONE: ++ break; ++ case NEO1973_CHGCMD_AUTOFAST: ++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, ++ PCF50606_MBCC1_AUTOFST, ++ PCF50606_MBCC1_AUTOFST); ++ break; ++ case NEO1973_CHGCMD_NO_AUTOFAST: ++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, ++ PCF50606_MBCC1_AUTOFST, 0); ++ break; ++ case NEO1973_CHGCMD_OFF: ++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, ++ PCF50606_MBCC1_CHGMOD_MASK, ++ PCF50606_MBCC1_CHGMOD_IDLE); ++ break; ++ ++ case NEO1973_CHGCMD_FAST: ++ case NEO1973_CHGCMD_FASTER: ++ pcf50606_reg_set_bit_mask(PCF50606_REG_MBCC1, ++ PCF50606_MBCC1_CHGMOD_MASK, ++ PCF50606_MBCC1_CHGMOD_FAST_CCCV); ++ break; ++ } ++ return 0; ++} ++ +Index: u-boot/board/neo1973/gta01/pcf50606.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/pcf50606.c +@@ -0,0 +1,100 @@ ++ ++#include <common.h> ++#include <pcf50606.h> ++ ++/* initial register set for PCF50606 in Neo1973 devices */ ++const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = { ++ [PCF50606_REG_OOCS] = 0x00, ++ /* gap */ ++ [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND, ++ [PCF50606_REG_INT2M] = 0x00, ++ [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES, ++ [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK | ++ PCF50606_OOCC1_CHGWAK | ++ PCF50606_OOCC1_EXTONWAK_HIGH, ++ [PCF50606_REG_OOCC2] = PCF50606_OOCC2_ONKEYDB_14ms | ++ PCF50606_OOCC2_EXTONDB_14ms, ++ /* gap */ ++ [PCF50606_REG_PSSC] = 0x00, ++ [PCF50606_REG_PWROKM] = 0x00, ++ /* gap */ ++#if defined(CONFIG_ARCH_GTA01B_v2) ++ [PCF50606_REG_DCDC1] = 0x1e, /* GL_3V3: off */ ++#elif defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) ++ [PCF50606_REG_DCDC1] = 0x18, /* GL_1V5: off */ ++#endif ++ [PCF50606_REG_DCDC2] = 0x00, ++ [PCF50606_REG_DCDC3] = 0x00, ++ [PCF50606_REG_DCDC4] = 0x30, /* 1.25A */ ++ ++ [PCF50606_REG_DCDEC1] = 0xe8, /* IO_3V3: on */ ++ [PCF50606_REG_DCDEC2] = 0x00, ++ ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++ [PCF50606_REG_DCUDC1] = 0xe3, /* CORE_1V8: 1.8V */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ [PCF50606_REG_DCUDC1] = 0xe4, /* CORE_1V8: 2.1V */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++ [PCF50606_REG_DCUDC1] = 0xc4, /* CORE_1V8: 2.1V if PWREN2 = HIGH */ ++#endif ++ [PCF50606_REG_DCUDC2] = 0x30, /* 1.25A current limit */ ++ ++#if defined(CONFIG_ARCH_GTA01_v3) ++ [PCF50606_REG_IOREGC] = 0x13, /* VTCXO_2V8: off */ ++#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \ ++ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) ++ //see internal bug 94 [PCF50606_REG_IOREGC] = 0x18, /* CODEC_3V3: off */ ++ [PCF50606_REG_IOREGC] = 0xf8, /* CODEC_3V3: on */ ++#endif ++ ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++ [PCF50606_REG_D1REGC1] = 0x15, /* VRF_3V: off */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ ++ defined(CONFIG_ARCH_GTA01B_v4) ++ [PCF50606_REG_D1REGC1] = 0x16, /* BT_3V15: off */ ++#endif ++ ++#if defined(CONFIG_ARCH_GTA01_v3) ++ [PCF50606_REG_D2REGC1] = 0xf8, /* SD_3V3: on */ ++#elif defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \ ++ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) ++ [PCF50606_REG_D2REGC1] = 0x10, /* GL_2V5: off */ ++#endif ++ ++#if defined(CONFIG_ARCH_GTA01_v3) ++ [PCF50606_REG_D3REGC1] = 0x18, /* CODEC_3V3: off */ ++#elif defined(CONFIG_ARCH_GTA01_v4) ++ [PCF50606_REG_D3REGC1] = 0x13, /* VTXCO_2V8: off */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ [PCF50606_REG_D3REGC1] = 0x00, /* USER1: off */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++ [PCF50606_REG_D3REGC1] = 0xec, /* STBY_1V8: 2.1V */ ++#endif ++ ++ [PCF50606_REG_LPREGC1] = 0xf8, /* LCM_3V3: on */ ++ [PCF50606_REG_LPREGC2] = 0x00, ++ ++ [PCF50606_REG_MBCC1] = 0x01, /* CHGAPE */ ++ [PCF50606_REG_MBCC2] = 0x00, /* unlimited charging */ ++ [PCF50606_REG_MBCC3] = 0x1a, /* 0.2*Ifast, 4.20V */ ++ [PCF50606_REG_BBCC] = 0x1f, /* 400uA */ ++ [PCF50606_REG_ADCC1] = 0x00, ++ [PCF50606_REG_ADCC2] = 0x00, ++ /* gap */ ++#if defined(CONFIG_ARCH_GTA01B_v4) ++ [PCF50606_REG_ACDC1] = 0x86, /* ACD thresh 1.6V, enabled */ ++#else ++ [PCF50606_REG_ACDC1] = 0x00, ++#endif ++ [PCF50606_REG_BVMC] = PCF50606_BVMC_THRSHLD_3V3, ++ [PCF50606_REG_PWMC1] = 0x00, ++ [PCF50606_REG_LEDC1] = 0x00, ++ [PCF50606_REG_LEDC2] = 0x00, ++ [PCF50606_REG_GPOC1] = 0x00, ++ [PCF50606_REG_GPOC2] = 0x00, ++ [PCF50606_REG_GPOC3] = 0x00, ++ [PCF50606_REG_GPOC4] = 0x00, ++ [PCF50606_REG_GPOC5] = 0x00, ++}; ++ ++ +Index: u-boot/board/neo1973/gta01/split_by_variant.sh +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/split_by_variant.sh +@@ -0,0 +1,57 @@ ++#!/bin/sh ++# --------------------------------------------------------- ++# Set the core module defines according to Core Module ++# --------------------------------------------------------- ++# --------------------------------------------------------- ++# Set up the GTA01 type define ++# --------------------------------------------------------- ++ ++CFGINC=${obj}include/config.h ++CFGTMP=${obj}board/neo1973/gta01/config.tmp ++ ++mkdir -p ${obj}include ++if [ "$1" == "" ] ++then ++ echo "$0:: No parameters - using GTA01Bv3 config" ++ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC ++ echo "GTA01_BIG_RAM=y" > $CFGTMP ++else ++ case "$1" in ++ gta01v4_config) ++ echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC ++ echo "GTA01_BIG_RAM=n" > $CFGTMP ++ ;; ++ ++ gta01v3_config) ++ echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC ++ echo "GTA01_BIG_RAM=n" > $CFGTMP ++ ;; ++ ++ gta01bv2_config) ++ echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC ++ echo "GTA01_BIG_RAM=y" > $CFGTMP ++ ;; ++ ++ gta01bv3_config) ++ echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC ++ echo "GTA01_BIG_RAM=y" > $CFGTMP ++ ;; ++ ++ gta01bv4_config) ++ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC ++ echo "GTA01_BIG_RAM=y" > $CFGTMP ++ ;; ++ ++ *) ++ echo "$0:: Unrecognised config - using GTA01Bv4 config" ++ echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC ++ echo "GTA01_BIG_RAM=y" > $CFGTMP ++ ;; ++ ++ esac ++ ++fi ++# --------------------------------------------------------- ++# Complete the configuration ++# --------------------------------------------------------- ++$MKCONFIG -a neo1973_gta01 arm arm920t gta01 neo1973 s3c24x0 +Index: u-boot/board/neo1973/gta01/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta01/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/neo1973_gta01.h +@@ -0,0 +1,265 @@ ++/* ++ * (C) Copyright 2006 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * Configuation settings for the FIC Neo1973 GTA01 Linux GSM phone ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#if defined(BUILD_FOR_RAM) ++/* If we want to start u-boot from inside RAM */ ++#define CONFIG_SKIP_RELOCATE_UBOOT 1 ++#define CONFIG_SKIP_LOWLEVEL_INIT 1 ++#else ++/* we want to start u-boot directly from within NAND flash */ ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++#endif ++ ++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ ++#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */ ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS (\ ++ CFG_CMD_BDI | \ ++ CFG_CMD_LOADS | \ ++ CFG_CMD_LAODB | \ ++ CFG_CMD_IMI | \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_MEMORY | \ ++ CFG_CMD_ENV | \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_BOOTD | \ ++ CFG_CMD_CONSOLE | \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_RUN | \ ++ CFG_CMD_ECHO | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_IMMAP | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_AUTOSCRIPT | \ ++ CFG_CMD_BSP | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_MISC | \ ++ /* CFG_CMD_USB | */ \ ++ /* CFG_CMD_JFFS2 | */ \ ++ CFG_CMD_DIAG | \ ++ /* CFG_CMD_HWFLOW | */ \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_FAT | \ ++ CFG_CMD_EXT2 | \ ++ 0) ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" ++#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#if defined(CONFIG_ARCH_GTA01_v3) ++#define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */ ++#elif defined(CONFIG_ARCH_GTA01_v4) ++#define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) ++#define CFG_PROMPT "GTA01Bv2 # " /* Monitor Command Prompt */ ++#elif defined(CONFIG_ARCH_GTA01B_v3) ++#define CFG_PROMPT "GTA01Bv3 # " /* Monitor Command Prompt */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) ++#define CFG_PROMPT "GTA01Bv4 # " /* Monitor Command Prompt */ ++#endif ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 16 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x33000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++#if 0 ++#define CONFIG_USB_OHCI 1 ++#endif ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ ++ defined(CONFIG_ARCH_GTA01B_v4) ++#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ ++#else ++#error Please define GTA01 variant ++#endif ++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++/* No NOR flash in this device */ ++#define CFG_NO_FLASH 1 ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ ++#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ ++ ++#define NAND_MAX_CHIPS 1 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE 1 ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++/* EXT2 driver */ ++#define CONFIG_EXT2 1 ++ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 0 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++#define CONFIG_JFFS2_NAND_OFF 0x634000 ++#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#if 0 ++#define CONFIG_SERIAL_TAG 1 ++#endif ++ ++#define CONFIG_DRIVER_S3C24X0_I2C 1 ++#define CONFIG_HARD_I2C 1 ++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ ++#define CFG_I2C_SLAVE 0x7f ++ ++/* we have a board_late_init() function */ ++#define BOARD_LATE_INIT 1 ++ ++#if 1 ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++#endif ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++#define CONFIG_S3C2410_NAND_HWECC 1 ++ ++#define CONFIG_DRIVER_PCF50606 1 ++ ++#endif /* __CONFIG_H */ +Index: u-boot/board/neo1973/common/neo1973.h +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/neo1973.h +@@ -0,0 +1,32 @@ ++#ifndef _NEO1973_H ++#define _NEO1973_H ++ ++enum wakeup_reason { ++ NEO1973_WAKEUP_NONE, ++ NEO1973_WAKEUP_RESET, ++ NEO1973_WAKEUP_POWER_KEY, ++ NEO1973_WAKEUP_CHARGER, ++ NEO1973_WAKEUP_ALARM, ++}; ++ ++enum neo1973_charger_cmd { ++ NEO1973_CHGCMD_NONE, ++ NEO1973_CHGCMD_AUTOFAST, ++ NEO1973_CHGCMD_NO_AUTOFAST, ++ NEO1973_CHGCMD_OFF, ++ NEO1973_CHGCMD_FAST, ++ NEO1973_CHGCMD_FASTER, ++}; ++ ++extern unsigned int neo1973_wakeup_cause; ++ ++void neo1973_poweroff(void); ++void neo1973_backlight(int on); ++void neo1973_vibrator(int on); ++ ++int neo1973_911_key_pressed(void); ++ ++const char *neo1973_get_charge_status(void); ++int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd); ++ ++#endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-qt2410.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-qt2410.patch new file mode 100644 index 0000000000..343598902f --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-20061030-qt2410.patch @@ -0,0 +1,1233 @@ +This patch adds 'board' support for the Armzone QT2410 +development board to u-boot. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2009,6 +2009,9 @@ + sbc2410x_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + ++qt2410_config : unconfig ++ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 ++ + scb9328_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx + +Index: u-boot/board/qt2410/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/qt2410/Makefile +@@ -0,0 +1,47 @@ ++# ++# (C) Copyright 2000, 2001, 2002 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := qt2410.o flash.o ++SOBJS := lowlevel_init.o ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +Index: u-boot/board/qt2410/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/qt2410/config.mk +@@ -0,0 +1,29 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x511d ++CONFIG_USB_DFU_REVISION=0x0100 ++ ++# ++# SMDK2410 has 1 bank of 64 MB DRAM ++# ++# 3000'0000 to 3400'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# we load ourself to 33F8'0000 ++# ++# download area is 3300'0000 ++# ++ ++ ++TEXT_BASE = 0x33F80000 +Index: u-boot/board/qt2410/flash.c +=================================================================== +--- /dev/null ++++ u-boot/board/qt2410/flash.c +@@ -0,0 +1,435 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Alex Zuepke <azu@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ulong myflush (void); ++ ++ ++#define FLASH_BANK_SIZE PHYS_FLASH_SIZE ++#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++ ++ ++#define CMD_READ_ARRAY 0x000000F0 ++#define CMD_UNLOCK1 0x000000AA ++#define CMD_UNLOCK2 0x00000055 ++#define CMD_ERASE_SETUP 0x00000080 ++#define CMD_ERASE_CONFIRM 0x00000030 ++#define CMD_PROGRAM 0x000000A0 ++#define CMD_UNLOCK_BYPASS 0x00000020 ++ ++#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) ++#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) ++ ++#define BIT_ERASE_DONE 0x00000080 ++#define BIT_RDY_MASK 0x00000080 ++#define BIT_PROGRAM_ERROR 0x00000020 ++#define BIT_TIMEOUT 0x80000000 /* our flag */ ++ ++#define READY 1 ++#define ERR 2 ++#define TMO 4 ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++ulong flash_init (void) ++{ ++ int i, j; ++ ulong size = 0; ++ ++ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { ++ ulong flashbase = 0; ++ ++ flash_info[i].flash_id = ++#if defined(CONFIG_AMD_LV400) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV400B & FLASH_TYPEMASK); ++#elif defined(CONFIG_AMD_LV800) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV800B & FLASH_TYPEMASK); ++#else ++#error "Unknown flash configured" ++#endif ++ flash_info[i].size = FLASH_BANK_SIZE; ++ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; ++ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); ++ if (i == 0) ++ flashbase = PHYS_FLASH_1; ++ else ++ panic ("configured too many flash banks!\n"); ++ for (j = 0; j < flash_info[i].sector_count; j++) { ++ if (j <= 3) { ++ /* 1st one is 16 KB */ ++ if (j == 0) { ++ flash_info[i].start[j] = ++ flashbase + 0; ++ } ++ ++ /* 2nd and 3rd are both 8 KB */ ++ if ((j == 1) || (j == 2)) { ++ flash_info[i].start[j] = ++ flashbase + 0x4000 + (j - ++ 1) * ++ 0x2000; ++ } ++ ++ /* 4th 32 KB */ ++ if (j == 3) { ++ flash_info[i].start[j] = ++ flashbase + 0x8000; ++ } ++ } else { ++ flash_info[i].start[j] = ++ flashbase + (j - 3) * MAIN_SECT_SIZE; ++ } ++ } ++ size += flash_info[i].size; ++ } ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_FLASH_BASE, ++ CFG_FLASH_BASE + monitor_flash_len - 1, ++ &flash_info[0]); ++ ++#if 0 ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_ENV_ADDR, ++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); ++#endif ++ ++ return size; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++void flash_print_info (flash_info_t * info) ++{ ++ int i; ++ ++ switch (info->flash_id & FLASH_VENDMASK) { ++ case (AMD_MANUFACT & FLASH_VENDMASK): ++ printf ("AMD: "); ++ break; ++ default: ++ printf ("Unknown Vendor "); ++ break; ++ } ++ ++ switch (info->flash_id & FLASH_TYPEMASK) { ++ case (AMD_ID_LV400B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV400BB (4Mbit)\n"); ++ break; ++ case (AMD_ID_LV800B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV800BB (8Mbit)\n"); ++ break; ++ default: ++ printf ("Unknown Chip Type\n"); ++ goto Done; ++ break; ++ } ++ ++ printf (" Size: %ld MB in %d Sectors\n", ++ info->size >> 20, info->sector_count); ++ ++ printf (" Sector Start Addresses:"); ++ for (i = 0; i < info->sector_count; i++) { ++ if ((i % 5) == 0) { ++ printf ("\n "); ++ } ++ printf (" %08lX%s", info->start[i], ++ info->protect[i] ? " (RO)" : " "); ++ } ++ printf ("\n"); ++ ++ Done:; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++int flash_erase (flash_info_t * info, int s_first, int s_last) ++{ ++ ushort result; ++ int iflag, cflag, prot, sect; ++ int rc = ERR_OK; ++ int chip; ++ ++ /* first look for protection bits */ ++ ++ if (info->flash_id == FLASH_UNKNOWN) ++ return ERR_UNKNOWN_FLASH_TYPE; ++ ++ if ((s_first < 0) || (s_first > s_last)) { ++ return ERR_INVAL; ++ } ++ ++ if ((info->flash_id & FLASH_VENDMASK) != ++ (AMD_MANUFACT & FLASH_VENDMASK)) { ++ return ERR_UNKNOWN_FLASH_VENDOR; ++ } ++ ++ prot = 0; ++ for (sect = s_first; sect <= s_last; ++sect) { ++ if (info->protect[sect]) { ++ prot++; ++ } ++ } ++ if (prot) ++ return ERR_PROTECTED; ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ /* Start erase on unprotected sectors */ ++ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { ++ printf ("Erasing sector %2d ... ", sect); ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ if (info->protect[sect] == 0) { /* not protected */ ++ vu_short *addr = (vu_short *) (info->start[sect]); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ *addr = CMD_ERASE_CONFIRM; ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > ++ CFG_FLASH_ERASE_TOUT) { ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ chip = TMO; ++ break; ++ } ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_ERASE_DONE) ++ chip = READY; ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) ++ chip = ERR; ++ ++ } while (!chip); ++ ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ ++ if (chip == ERR) { ++ rc = ERR_PROG_ERROR; ++ goto outahere; ++ } ++ if (chip == TMO) { ++ rc = ERR_TIMOUT; ++ goto outahere; ++ } ++ ++ printf ("ok.\n"); ++ } else { /* it was protected */ ++ ++ printf ("protected!\n"); ++ } ++ } ++ ++ if (ctrlc ()) ++ printf ("User Interrupt!\n"); ++ ++ outahere: ++ /* allow flash to settle - wait 10 ms */ ++ udelay_masked (10000); ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash ++ */ ++ ++volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) ++{ ++ vu_short *addr = (vu_short *) dest; ++ ushort result; ++ int rc = ERR_OK; ++ int cflag, iflag; ++ int chip; ++ ++ /* ++ * Check if Flash is (sufficiently) erased ++ */ ++ result = *addr; ++ if ((result & data) != data) ++ return ERR_NOT_ERASED; ++ ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; ++ *addr = CMD_PROGRAM; ++ *addr = data; ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { ++ chip = ERR | TMO; ++ break; ++ } ++ if (!chip && ((result & 0x80) == (data & 0x80))) ++ chip = READY; ++ ++ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { ++ result = *addr; ++ ++ if ((result & 0x80) == (data & 0x80)) ++ chip = READY; ++ else ++ chip = ERR; ++ } ++ ++ } while (!chip); ++ ++ *addr = CMD_READ_ARRAY; ++ ++ if (chip == ERR || *addr != data) ++ rc = ERR_PROG_ERROR; ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash. ++ */ ++ ++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) ++{ ++ ulong cp, wp; ++ int l; ++ int i, rc; ++ ushort data; ++ ++ wp = (addr & ~1); /* get lower word aligned address */ ++ ++ /* ++ * handle unaligned start bytes ++ */ ++ if ((l = addr - wp) != 0) { ++ data = 0; ++ for (i = 0, cp = wp; i < l; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ for (; i < 2 && cnt > 0; ++i) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ ++cp; ++ } ++ for (; cnt == 0 && i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ wp += 2; ++ } ++ ++ /* ++ * handle word aligned part ++ */ ++ while (cnt >= 2) { ++ data = *((vu_short *) src); ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ src += 2; ++ wp += 2; ++ cnt -= 2; ++ } ++ ++ if (cnt == 0) { ++ return ERR_OK; ++ } ++ ++ /* ++ * handle unaligned tail bytes ++ */ ++ data = 0; ++ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ } ++ for (; i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ return write_hword (info, wp, data); ++} +Index: u-boot/board/qt2410/lowlevel_init.S +=================================================================== +--- /dev/null ++++ u-boot/board/qt2410/lowlevel_init.S +@@ -0,0 +1,171 @@ ++/* ++ * Memory Setup stuff - taken from blob memsetup.S ++ * ++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and ++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) ++ * ++ * Modified for the Samsung SMDK2410 by ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <config.h> ++#include <version.h> ++ ++ ++/* some parameters for the board */ ++ ++/* ++ * ++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S ++ * ++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> ++ * ++ */ ++ ++#define BWSCON 0x48000000 ++ ++/* BWSCON */ ++#define DW8 (0x0) ++#define DW16 (0x1) ++#define DW32 (0x2) ++#define WAIT (0x1<<2) ++#define UBLB (0x1<<3) ++ ++#define B1_BWSCON (DW32) ++#define B2_BWSCON (DW16) ++#define B3_BWSCON (DW16 + WAIT + UBLB) ++#define B4_BWSCON (DW16) ++#define B5_BWSCON (DW16) ++#define B6_BWSCON (DW32) ++#define B7_BWSCON (DW32) ++ ++/* BANK0CON */ ++#define B0_Tacs 0x0 /* 0clk */ ++#define B0_Tcos 0x0 /* 0clk */ ++#define B0_Tacc 0x7 /* 14clk */ ++#define B0_Tcoh 0x0 /* 0clk */ ++#define B0_Tah 0x0 /* 0clk */ ++#define B0_Tacp 0x0 ++#define B0_PMC 0x0 /* normal */ ++ ++/* BANK1CON */ ++#define B1_Tacs 0x0 /* 0clk */ ++#define B1_Tcos 0x0 /* 0clk */ ++#define B1_Tacc 0x7 /* 14clk */ ++#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tah 0x0 /* 0clk */ ++#define B1_Tacp 0x0 ++#define B1_PMC 0x0 ++ ++#define B2_Tacs 0x0 ++#define B2_Tcos 0x0 ++#define B2_Tacc 0x7 ++#define B2_Tcoh 0x0 ++#define B2_Tah 0x0 ++#define B2_Tacp 0x0 ++#define B2_PMC 0x0 ++ ++#define B3_Tacs 0x0 /* 0clk */ ++#define B3_Tcos 0x3 /* 4clk */ ++#define B3_Tacc 0x7 /* 14clk */ ++#define B3_Tcoh 0x1 /* 1clk */ ++#define B3_Tah 0x0 /* 0clk */ ++#define B3_Tacp 0x3 /* 6clk */ ++#define B3_PMC 0x0 /* normal */ ++ ++#define B4_Tacs 0x0 /* 0clk */ ++#define B4_Tcos 0x0 /* 0clk */ ++#define B4_Tacc 0x7 /* 14clk */ ++#define B4_Tcoh 0x0 /* 0clk */ ++#define B4_Tah 0x0 /* 0clk */ ++#define B4_Tacp 0x0 ++#define B4_PMC 0x0 /* normal */ ++ ++#define B5_Tacs 0x0 /* 0clk */ ++#define B5_Tcos 0x0 /* 0clk */ ++#define B5_Tacc 0x7 /* 14clk */ ++#define B5_Tcoh 0x0 /* 0clk */ ++#define B5_Tah 0x0 /* 0clk */ ++#define B5_Tacp 0x0 ++#define B5_PMC 0x0 /* normal */ ++ ++#define B6_MT 0x3 /* SDRAM */ ++#define B6_Trcd 0x1 ++#define B6_SCAN 0x1 /* 9bit */ ++ ++#define B7_MT 0x3 /* SDRAM */ ++#define B7_Trcd 0x1 /* 3clk */ ++#define B7_SCAN 0x1 /* 9bit */ ++ ++/* REFRESH parameter */ ++#define REFEN 0x1 /* Refresh enable */ ++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ ++#define Trp 0x1 /* 3clk */ ++#define Trc 0x3 /* 7clk */ ++#define Tchr 0x2 /* 3clk */ ++//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ ++#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */ ++/**************************************/ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl lowlevel_init ++lowlevel_init: ++ /* memory control configuration */ ++ /* make r0 relative the current location so that it */ ++ /* reads SMRDATA out of FLASH rather than memory ! */ ++ adr r0, SMRDATA ++ ldr r1, =BWSCON /* Bus Width Status Controller */ ++ add r2, r0, #13*4 ++0: ++ ldr r3, [r0], #4 ++ str r3, [r1], #4 ++ cmp r2, r0 ++ bne 0b ++ ++ /* setup asynchronous bus mode */ ++ mrc p15, 0, r1 ,c1 ,c0, 0 ++ orr r1, r1, #0xc0000000 ++ mcr p15, 0, r1, c1, c0, 0 ++ ++ /* everything is fine now */ ++ mov pc, lr ++ ++ .ltorg ++/* the literal pools origin */ ++ ++SMRDATA: ++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) ++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) ++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) ++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) ++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) ++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) ++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) ++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) ++ .word 0xb2 ++ .word 0x30 ++ .word 0x30 +Index: u-boot/board/qt2410/qt2410.c +=================================================================== +--- /dev/null ++++ u-boot/board/qt2410/qt2410.c +@@ -0,0 +1,152 @@ ++/* ++ * (C) 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on existing S3C2410 startup code in u-boot: ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <video_fb.h> ++#include <usbdcore.h> ++#include <s3c2410.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if 1 ++//#define M_MDIV 0xA1 /* Fout = 202.8MHz */ ++//#define M_PDIV 0x3 ++//#define M_SDIV 0x1 ++#define M_MDIV 0x90 /* Fout = 202.8MHz */ ++#define M_PDIV 0x7 ++#define M_SDIV 0x0 ++#else ++#define M_MDIV 0x5c /* Fout = 150.0MHz */ ++#define M_PDIV 0x4 ++#define M_SDIV 0x0 ++#endif ++ ++#if 1 ++#define U_M_MDIV 0x78 ++#define U_M_PDIV 0x2 ++#define U_M_SDIV 0x3 ++#else ++#define U_M_MDIV 0x48 ++#define U_M_PDIV 0x3 ++#define U_M_SDIV 0x2 ++#endif ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++ gpio->GPACON = 0x007FFFFF; ++ gpio->GPBCON = 0x00044555; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPCCON = 0xAAAAAAAA; ++ gpio->GPCUP = 0x0000FFFF; ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ gpio->GPFCON = 0x000055AA; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPGCON = 0xFF95FFBA; ++ //gpio->GPGUP = 0x0000FFFF; ++ gpio->GPGUP = 0x0000AFEF; ++ gpio->GPHCON = 0x0028FAAA; ++ gpio->GPHUP = 0x000007FF; ++ ++ /* arch number of SMDK2410-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_QT2410; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++#if defined(CONFIG_USB_DEVICE) ++void udc_ctrl(enum usbd_event event, int param) ++{ ++} ++#endif ++ ++void board_video_init(GraphicDevice *pGD) ++{ ++ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); ++ ++ /* FIXME: select LCM type by env variable */ ++ ++ /* Configuration for GTA01 LCM on QT2410 */ ++ lcd->LCDCON1 = 0x00000178; /* CLKVAL=1, BPPMODE=16bpp, TFT, ENVID=0 */ ++ ++ lcd->LCDCON2 = 0x019fc3c1; ++ lcd->LCDCON3 = 0x0039df67; ++ lcd->LCDCON4 = 0x00000007; ++ lcd->LCDCON5 = 0x0001cf09; ++ lcd->LPCSEL = 0x00000000; ++} ++ ++int dram_init (void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} +Index: u-boot/board/qt2410/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/qt2410/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/include/configs/qt2410.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/qt2410.h +@@ -0,0 +1,287 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * Gary Jennejohn <gj@denx.de> ++ * David Mueller <d.mueller@elsoft.ch> ++ * ++ * Configuation settings for the Armzone QT2410 board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#if 0 ++/* If we want to start u-boot from usb bootloader in NOR flash */ ++#define CONFIG_SKIP_RELOCATE_UBOOT 1 ++#define CONFIG_SKIP_LOWLEVEL_INIT 1 ++#else ++/* If we want to start u-boot directly from within NAND flash */ ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++#endif ++ ++#define CFG_UBOOT_SIZE 0x40000 ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ ++#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++#if 0 ++#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ ++#define CS8900_BASE 0x19000300 ++#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ ++#endif ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */ ++#define CONFIG_HWFLOW 1 ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS (\ ++ CFG_CMD_BDI | \ ++ CFG_CMD_LOADS | \ ++ CFG_CMD_LOADB | \ ++ CFG_CMD_IMI | \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_MEMORY | \ ++ CFG_CMD_ENV | \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_BOOTD | \ ++ CFG_CMD_CONSOLE | \ ++ CFG_CMD_BMP | \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_RUN | \ ++ CFG_CMD_ECHO | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_IMMAP | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_AUTOSCRIPT | \ ++ CFG_CMD_BSP | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_MISC | \ ++ /* CFG_CMD_USB | */ \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_HWFLOW | \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_FAT | \ ++ CFG_CMD_EXT2 | \ ++ 0) ++ ++#if 0 ++ CFG_CMD_DHCP | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_NET | \ ++ ++#endif ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" ++#define CONFIG_ETHADDR 01:ab:cd:ef:fe:dc ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_IPADDR 10.0.0.110 ++#define CONFIG_SERVERIP 10.0.0.1 ++/*#define CONFIG_BOOTFILE "elinos-lart" */ ++#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 64 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x33000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++#define CONFIG_USB_OHCI 1 ++ ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x511d /* CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "Armzone" ++#define CONFIG_USBD_PRODUCT_NAME "QT2410 Bootloader " U_BOOT_VERSION ++#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 0x4000 ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ ++ ++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ ++ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ ++#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ ++ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */ ++#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ ++ ++#define NAND_MAX_CHIPS 1 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE 1 ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++#define CONFIG_EXT2 1 ++ ++/* FAT driver in u-boot is broken currently */ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 1 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++ ++#define CONFIG_DRIVER_S3C24X0_I2C 1 ++#define CONFIG_HARD_I2C 1 ++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ ++#define CFG_I2C_SLAVE 0x7f ++ ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_SPLASH_SCREEN ++#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ ++#define CONFIG_VIDEO_BMP_GZIP ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++#define CONFIG_UNZIP ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++ ++#define MTDIDS_DEFAULT "nand0=qt2410-nand" ++#define MTPARTS_DEFAULT "qt2410-nand:192k(u-boot),8k(u-boot_env),2M(kernel),2M(splash),-(jffs2)" ++ ++#endif /* __CONFIG_H */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920_s3c2410_irq_demux.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920_s3c2410_irq_demux.patch new file mode 100644 index 0000000000..b39a268c84 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920_s3c2410_irq_demux.patch @@ -0,0 +1,56 @@ +This patch adds a IRQ demultiplexer callback to the arm920 cpu core code, +plus a stub implementation of it for the S3C2410. + +Index: u-boot.git/cpu/arm920t/interrupts.c +=================================================================== +--- u-boot.git.orig/cpu/arm920t/interrupts.c 2007-02-05 22:49:11.000000000 +0100 ++++ u-boot.git/cpu/arm920t/interrupts.c 2007-02-05 23:19:01.000000000 +0100 +@@ -161,11 +161,16 @@ + + void do_irq (struct pt_regs *pt_regs) + { +-#if defined (CONFIG_USE_IRQ) && defined (CONFIG_ARCH_INTEGRATOR) ++#if defined (CONFIG_USE_IRQ) ++#if defined (ARM920_IRQ_CALLBACK) ++ ARM920_IRQ_CALLBACK(); ++ return; ++#elif defined (CONFIG_ARCH_INTEGRATOR) + /* ASSUMED to be a timer interrupt */ + /* Just clear it - count handled in */ + /* integratorap.c */ + *(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0; ++#endif /* ARCH_INTEGRATOR */ + #else + printf ("interrupt request\n"); + show_regs (pt_regs); +Index: u-boot.git/cpu/arm920t/s3c24x0/interrupts.c +=================================================================== +--- u-boot.git.orig/cpu/arm920t/s3c24x0/interrupts.c 2007-02-05 22:49:11.000000000 +0100 ++++ u-boot.git/cpu/arm920t/s3c24x0/interrupts.c 2007-02-05 23:21:35.000000000 +0100 +@@ -216,4 +216,13 @@ + /*NOTREACHED*/ + } + ++#ifdef CONFIG_USE_IRQ ++void s3c2410_irq(void) ++{ ++ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); ++ u_int32_t intpnd = irq->INTPND; ++ ++} ++#endif /* USE_IRQ */ ++ + #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ +Index: u-boot.git/include/common.h +=================================================================== +--- u-boot.git.orig/include/common.h 2007-02-05 22:49:11.000000000 +0100 ++++ u-boot.git/include/common.h 2007-02-05 23:19:01.000000000 +0100 +@@ -452,6 +452,8 @@ + ulong get_PCI_freq (void); + #endif + #if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) ++void s3c2410_irq(void); ++#define ARM920_IRQ_CALLBACK s3c2410_irq + ulong get_FCLK (void); + ulong get_HCLK (void); + ulong get_PCLK (void); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920t-gd_in_irq.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920t-gd_in_irq.patch new file mode 100644 index 0000000000..b3d7bc1166 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-arm920t-gd_in_irq.patch @@ -0,0 +1,28 @@ +This patch allows us to use the 'gd' pointer (and thus environment +and everything else associated with it) from interrupt context on +arm920t. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S 2007-02-24 02:35:38.000000000 +0100 ++++ u-boot/cpu/arm920t/start.S 2007-02-24 02:36:01.000000000 +0100 +@@ -474,12 +474,12 @@ + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 +- add r8, sp, #S_PC +- stmdb r8, {sp, lr}^ @ Calling SP, LR +- str lr, [r8, #0] @ Save calling PC ++ add r7, sp, #S_PC ++ stmdb r7, {sp, lr}^ @ Calling SP, LR ++ str lr, [r7, #0] @ Save calling PC + mrs r6, spsr +- str r6, [r8, #4] @ Save CPSR +- str r0, [r8, #8] @ Save OLD_R0 ++ str r6, [r7, #4] @ Save CPSR ++ str r0, [r7, #8] @ Save OLD_R0 + mov r0, sp + .endm + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-bbt-quiet.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-bbt-quiet.patch new file mode 100644 index 0000000000..9b1febe956 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-bbt-quiet.patch @@ -0,0 +1,43 @@ +This patch makes the u-boot NAND BBT code a bit more quiet + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/drivers/nand/nand_bbt.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_bbt.c 2007-02-16 23:54:02.000000000 +0100 ++++ u-boot/drivers/nand/nand_bbt.c 2007-02-16 23:54:05.000000000 +0100 +@@ -157,10 +157,6 @@ + this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); + continue; + } +- /* Leave it for now, if its matured we can move this +- * message to MTD_DEBUG_LEVEL0 */ +- printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n", +- ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + /* Factory marked bad or worn out ? */ + if (tmp == 0) + this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); +@@ -229,14 +225,12 @@ + if (td->options & NAND_BBT_VERSION) { + nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); + td->version[0] = buf[mtd->oobblock + td->veroffs]; +- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]); + } + + /* Read the mirror version, if available */ + if (md && (md->options & NAND_BBT_VERSION)) { + nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); + md->version[0] = buf[mtd->oobblock + md->veroffs]; +- printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); + } + + return 1; +@@ -374,8 +368,6 @@ + for (i = 0; i < chips; i++) { + if (td->pages[i] == -1) + printk (KERN_WARNING "Bad block table not found for chip %d\n", i); +- else +- printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]); + } + return 0; + } diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-cmd_s3c2410.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-cmd_s3c2410.patch new file mode 100644 index 0000000000..993ef4f6f2 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-cmd_s3c2410.patch @@ -0,0 +1,175 @@ +This patch adds a new 's3c2410' command which currently supports 's3c2410 speed +{set,get,list} and thus allows dynamic change of the CPU clock. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/cpu/arm920t/s3c24x0/Makefile +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/Makefile 2007-02-24 15:14:00.000000000 +0100 ++++ u-boot/cpu/arm920t/s3c24x0/Makefile 2007-02-24 15:21:02.000000000 +0100 +@@ -26,7 +26,7 @@ + LIB = $(obj)lib$(SOC).a + + COBJS = i2c.o interrupts.o serial.o speed.o \ +- usb_ohci.o nand_read.o nand.o ++ usb_ohci.o nand_read.o nand.o cmd_s3c2410.o + + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +Index: u-boot/cpu/arm920t/s3c24x0/cmd_s3c2410.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot/cpu/arm920t/s3c24x0/cmd_s3c2410.c 2007-02-24 15:22:17.000000000 +0100 +@@ -0,0 +1,152 @@ ++/* ++ * (C) Copyright 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/* ++ * Boot support ++ */ ++#include <common.h> ++#include <command.h> ++#include <net.h> /* for print_IPaddr */ ++#include <s3c2410.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#if (CONFIG_COMMANDS & CFG_CMD_BDI) ++ ++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) ++#define MHZ 1000000 ++ ++static void print_cpu_speed(void) ++{ ++ printf("FCLK = %u MHz, HCLK = %u MHz, PCLK = %u MHz\n", ++ get_FCLK()/MHZ, get_HCLK()/MHZ, get_PCLK()/MHZ); ++} ++ ++struct s3c2410_pll_speed { ++ u_int16_t mhz; ++ u_int32_t mpllcon; ++ u_int32_t clkdivn; ++}; ++ ++#define CLKDIVN_1_1_1 0x00 ++#define CLKDIVN_1_2_2 0x02 ++#define CLKDIVN_1_2_4 0x03 ++#define CLKDIVN_1_4_4 0x04 ++ ++static const struct s3c2410_pll_speed pll_configs[] = { ++ { ++ .mhz = 50, ++ .mpllcon = ((0x5c << 12) + (0x4 << 4) + 0x2), ++ .clkdivn = CLKDIVN_1_1_1, ++ }, ++ { ++ .mhz = 101, ++ .mpllcon = ((0x7f << 12) + (0x2 << 4) + 0x2), ++ .clkdivn = CLKDIVN_1_2_2, ++ }, ++ { ++ .mhz = 202, ++ .mpllcon = ((0x90 << 12) + (0x7 << 4) + 0x0), ++ .clkdivn = CLKDIVN_1_2_4, ++ }, ++ { ++ .mhz = 266, ++ .mpllcon = ((0x7d << 12) + (0x1 << 4) + 0x1), ++ .clkdivn = CLKDIVN_1_2_4, ++ }, ++}; ++ ++static void list_cpu_speeds(void) ++{ ++ int i; ++ for (i = 0; i < ARRAY_SIZE(pll_configs); i++) ++ printf("%u MHz\n", pll_configs[i].mhz); ++} ++ ++static int reconfig_mpll(u_int16_t mhz) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(pll_configs); i++) { ++ if (pll_configs[i].mhz == mhz) { ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = pll_configs[i].mpllcon; ++ clk_power->UPLLCON = ((0x78 << 12) + (0x2 << 4) + 0x3), ++ clk_power->CLKDIVN = pll_configs[i].clkdivn; ++ ++ /* If we changed the speed, we need to re-configure ++ * the serial baud rate generator */ ++ serial_setbrg(); ++ return 0; ++ } ++ } ++ return -1; ++} ++ ++int do_s3c2410 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ if (!strcmp(argv[1], "speed")) { ++ if (argc < 2) ++ goto out_help; ++ if (!strcmp(argv[2], "get")) ++ print_cpu_speed(); ++ else if (!strcmp(argv[2], "list")) ++ list_cpu_speeds(); ++ else if (!strcmp(argv[2], "set")) { ++ unsigned long mhz; ++ if (argc < 3) ++ goto out_help; ++ ++ mhz = simple_strtoul(argv[3], NULL, 10); ++ ++ if (reconfig_mpll(mhz) < 0) ++ printf("error, speed %uMHz unknown\n", mhz); ++ else ++ print_cpu_speed(); ++ } else ++ goto out_help; ++ } else { ++out_help: ++ printf("Usage:\n%s\n", cmdtp->usage); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++/* -------------------------------------------------------------------- */ ++ ++ ++U_BOOT_CMD( ++ s3c2410, 4, 1, do_s3c2410, ++ "s3c2410 - SoC specific commands\n", ++ "speed get - display current PLL speed config\n" ++ "s3c2410 speed list - display supporte PLL speed configs\n" ++ "s3c2410 speed set - set PLL speed\n" ++); ++ ++#endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-cramfs_but_no_jffs2.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-cramfs_but_no_jffs2.patch new file mode 100644 index 0000000000..349b83697e --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-cramfs_but_no_jffs2.patch @@ -0,0 +1,41 @@ +Fix building with CRAMFS but not JFFS2 support + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/fs/cramfs/cramfs.c +=================================================================== +--- u-boot.orig/fs/cramfs/cramfs.c 2007-02-17 11:46:26.000000000 +0100 ++++ u-boot/fs/cramfs/cramfs.c 2007-02-17 11:54:36.000000000 +0100 +@@ -27,7 +27,7 @@ + #include <common.h> + #include <malloc.h> + +-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) ++#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS) + + #include <asm/byteorder.h> + #include <linux/stat.h> +Index: u-boot/common/cmd_jffs2.c +=================================================================== +--- u-boot.orig/common/cmd_jffs2.c 2007-02-17 11:47:51.000000000 +0100 ++++ u-boot/common/cmd_jffs2.c 2007-02-17 14:08:25.000000000 +0100 +@@ -170,10 +170,19 @@ + static struct mtd_device *current_dev = NULL; + static u8 current_partnum = 0; + ++#ifdef CFG_CMD_CRAMFS + extern int cramfs_check (struct part_info *info); + extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename); + extern int cramfs_ls (struct part_info *info, char *filename); + extern int cramfs_info (struct part_info *info); ++#else ++/* defining empty macros for function names is ugly but avoids ifdef clutter ++ * all over the code */ ++#define cramfs_check(x) (0) ++#define cramfs_load(x,y,z) (-1) ++#define cramfs_ls(x,y) (0) ++#define cramfs_info(x) (0) ++#endif + + static struct part_info* jffs2_part_info(struct mtd_device *dev, unsigned int part_num); + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-dfu.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-dfu.patch new file mode 100644 index 0000000000..1122f4894f --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-dfu.patch @@ -0,0 +1,2081 @@ +Index: u-boot/drivers/usbdcore_ep0.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_ep0.c ++++ u-boot/drivers/usbdcore_ep0.c +@@ -42,10 +42,15 @@ + */ + + #include <common.h> ++DECLARE_GLOBAL_DATA_PTR; + + #if defined(CONFIG_USB_DEVICE) + #include "usbdcore.h" + ++#ifdef CONFIG_USBD_DFU ++#include <usb_dfu.h> ++#endif ++ + #if 0 + #define dbg_ep0(lvl,fmt,args...) serial_printf("[%s] %s:%d: "fmt"\n",__FILE__,__FUNCTION__,__LINE__,##args) + #else +@@ -213,7 +218,7 @@ + urb->buffer = device_descriptor; + urb->actual_length = MIN(sizeof(*device_descriptor), max); + } +- /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */ ++ dbg_ep0(3, "using device configuration, actual_length: %x", urb->actual_length); + break; + + case USB_DESCRIPTOR_TYPE_CONFIGURATION: +@@ -267,7 +272,24 @@ + return -1; + case USB_DESCRIPTOR_TYPE_ENDPOINT: + return -1; ++ /* This really means "Class Specific Descriptor #1 == USB_DT_DFU */ + case USB_DESCRIPTOR_TYPE_HID: ++#ifdef CONFIG_USBD_DFU ++ { ++ int bNumInterface = ++ le16_to_cpu(urb->device_request.wIndex); ++ ++ /* In runtime mode, we only respond to the DFU INTERFACE, ++ * whereas in DFU mode, we respond for all intrfaces */ ++ if (device->dfu_state != DFU_STATE_appIDLE && ++ device->dfu_state != DFU_STATE_appDETACH || ++ bNumInterface == CONFIG_USBD_DFU_INTERFACE) { ++ urb->buffer = &device->dfu_cfg_desc->func_dfu; ++ urb->actual_length = sizeof(struct usb_dfu_func_descriptor); ++ } else ++ return -1; ++ } ++#else /* CONFIG_USBD_DFU */ + { + return -1; /* unsupported at this time */ + #if 0 +@@ -294,6 +316,7 @@ + max); + #endif + } ++#endif /* CONFIG_USBD_DFU */ + break; + case USB_DESCRIPTOR_TYPE_REPORT: + { +@@ -388,6 +411,24 @@ + le16_to_cpu (request->wLength), + USBD_DEVICE_REQUESTS (request->bRequest)); + ++#ifdef CONFIG_USBD_DFU ++ if ((request->bmRequestType & 0x3f) == USB_TYPE_DFU && ++ (device->dfu_state != DFU_STATE_appIDLE || ++ le16_to_cpu(request->wIndex) == CONFIG_USBD_DFU_INTERFACE)) { ++ int rc = dfu_ep0_handler(urb); ++ switch (rc) { ++ case DFU_EP0_NONE: ++ case DFU_EP0_UNHANDLED: ++ break; ++ case DFU_EP0_ZLP: ++ case DFU_EP0_DATA: ++ return 0; ++ case DFU_EP0_STALL: ++ return -1; ++ } ++ } ++#endif /* CONFIG_USB_DFU */ ++ + /* handle USB Standard Request (c.f. USB Spec table 9-2) */ + if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { + if (device->device_state <= STATE_CONFIGURED) +@@ -570,7 +611,8 @@ + device->interface = le16_to_cpu (request->wIndex); + device->alternate = le16_to_cpu (request->wValue); + /*dbg_ep0(2, "set interface: %d alternate: %d", device->interface, device->alternate); */ +- serial_printf ("DEVICE_SET_INTERFACE.. event?\n"); ++ usbd_device_event_irq(device, DEVICE_SET_INTERFACE, ++ (request->wIndex << 16 | request->wValue)); + return 0; + + case USB_REQ_GET_STATUS: +Index: u-boot/drivers/usbdfu.c +=================================================================== +--- /dev/null ++++ u-boot/drivers/usbdfu.c +@@ -0,0 +1,1069 @@ ++/* ++ * (C) 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on existing SAM7DFU code from OpenPCD: ++ * (C) Copyright 2006 by Harald Welte <hwelte@hmw-consulting.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * ++ * TODO: ++ * - make NAND support reasonably self-contained and put in apropriate ++ * ifdefs ++ * - add some means of synchronization, i.e. block commandline access ++ * while DFU transfer is in progress, and return to commandline once ++ * we're finished ++ * - add VERIFY support after writing to flash ++ * - sanely free() resources allocated during first uppload/download ++ * request when aborting ++ * - sanely free resources when another alternate interface is selected ++ * ++ * Maybe: ++ * - add something like uImage or some other header that provides CRC ++ * checking? ++ * - make 'dnstate' attached to 'struct usb_device_instance' ++ */ ++ ++#include <config.h> ++#if defined(CONFIG_USBD_DFU) ++ ++#include <common.h> ++DECLARE_GLOBAL_DATA_PTR; ++ ++#include <malloc.h> ++#include <linux/types.h> ++#include <linux/list.h> ++#include <asm/errno.h> ++#include <usbdcore.h> ++#include <usb_dfu.h> ++#include <usb_dfu_descriptors.h> ++#include <usb_dfu_trailer.h> ++ ++#include <nand.h> ++#include <jffs2/load_kernel.h> ++int mtdparts_init(void); ++extern struct list_head devices; ++ ++#include "usbdcore_s3c2410.h" ++#include "usbtty.h" /* for STR_* defs */ ++ ++#define RET_NOTHING 0 ++#define RET_ZLP 1 ++#define RET_STALL 2 ++ ++volatile enum dfu_state *system_dfu_state; /* for 3rd parties */ ++ ++ ++struct dnload_state { ++ nand_info_t *nand; ++ struct part_info *part; ++ unsigned int part_net_size; /* net sizee (excl. bad blocks) of part */ ++ ++ nand_erase_options_t erase_opts; ++ nand_write_options_t write_opts; ++ nand_read_options_t read_opts; ++ ++ unsigned char *ptr; /* pointer to next empty byte in buffer */ ++ unsigned int off; /* offset of current erase page in flash chip */ ++ unsigned char *buf; /* pointer to allocated erase page buffer */ ++ ++ /* unless doing an atomic transfer, we use the static buffer below. ++ * This saves us from having to clean up dynamic allications in the ++ * various error paths of the code. Also, it will always work, no ++ * matter what the memory situation is. */ ++ unsigned char _buf[0x20000]; /* FIXME: depends flash page size */ ++}; ++ ++static struct dnload_state _dnstate; ++ ++static int dfu_trailer_matching(const struct uboot_dfu_trailer *trailer) ++{ ++ if (trailer->magic != UBOOT_DFU_TRAILER_MAGIC || ++ trailer->version != UBOOT_DFU_TRAILER_V1 || ++ trailer->vendor != CONFIG_USBD_VENDORID || ++ (trailer->product != CONFIG_USBD_PRODUCTID_CDCACM && ++ trailer->product != CONFIG_USBD_PRODUCTID_GSERIAL)) ++ return 0; ++#ifdef CONFIG_REVISION_TAG ++ if (trailer->revision != get_board_rev()) ++ return 0; ++#endif ++ ++ return 1; ++} ++ ++static struct part_info *get_partition_nand(int idx) ++{ ++ struct mtd_device *dev; ++ struct part_info *part; ++ struct list_head *pentry; ++ int i; ++ ++ if (mtdparts_init()) ++ return NULL; ++ if (list_empty(&devices)) ++ return NULL; ++ ++ dev = list_entry(devices.next, struct mtd_device, link); ++ i = 0; ++ list_for_each(pentry, &dev->parts) { ++ if (i == idx) { ++ part = list_entry(pentry, struct part_info, link); ++ return part; ++ } ++ i++; ++ } ++ ++ return NULL; ++} ++ ++#define LOAD_ADDR ((unsigned char *)0x32000000) ++ ++static int initialize_ds_nand(struct usb_device_instance *dev, struct dnload_state *ds) ++{ ++ ds->part = get_partition_nand(dev->alternate - 1); ++ if (!ds->part) { ++ printf("DFU: unable to find partition %u\b", dev->alternate-1); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ return RET_STALL; ++ } ++ ds->nand = &nand_info[ds->part->dev->id->num]; ++ ds->off = ds->part->offset; ++ ds->part_net_size = nand_net_part_size(ds->part); ++ ++ if (ds->nand->erasesize > sizeof(ds->_buf)) { ++ printf("*** Warning - NAND ERASESIZE bigger than static buffer\n"); ++ ds->buf = malloc(ds->nand->erasesize); ++ if (!ds->buf) { ++ printf("DFU: can't allocate %u bytes\n", ds->nand->erasesize); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ return RET_STALL; ++ } ++ } else ++ ds->buf = ds->_buf; ++ ++ ds->ptr = ds->buf; ++ ++ memset(&ds->read_opts, 0, sizeof(ds->read_opts)); ++ ++ memset(&ds->erase_opts, 0, sizeof(ds->erase_opts)); ++ ds->erase_opts.quiet = 1; ++ /* FIXME: do this more dynamic */ ++ if (!strcmp(ds->part->name, "rootfs")) ++ ds->erase_opts.jffs2 = 1; ++ ++ memset(&ds->write_opts, 0, sizeof(ds->write_opts)); ++ ds->write_opts.pad = 1; ++ ds->write_opts.blockalign = 1; ++ ds->write_opts.quiet = 1; ++ ++ debug("initialize_ds_nand(dev=%p, ds=%p): ", dev, ds); ++ debug("nand=%p, ptr=%p, buf=%p, off=0x%x\n", ds->nand, ds->ptr, ds->buf, ds->off); ++ ++ return RET_NOTHING; ++} ++ ++static int erase_flash_verify_nand(struct urb *urb, struct dnload_state *ds, ++ unsigned long erasesize, unsigned long size) ++{ ++ struct usb_device_instance *dev = urb->device; ++ int rc; ++ ++ debug("erase_flash_verify_nand(urb=%p, ds=%p, erase=0x%x size=0x%x)\n", ++ urb, ds, erasesize, size); ++ ++ if (erasesize == ds->nand->erasesize) { ++ /* we're only writing a single block and need to ++ * do bad block skipping / offset adjustments our own */ ++ while (ds->nand->block_isbad(ds->nand, ds->off)) { ++ debug("SKIP_ONE_BLOCK(0x%08x)!!\n", ds->off); ++ ds->off += ds->nand->erasesize; ++ } ++ } ++ ++ /* we have finished one eraseblock, flash it */ ++ ds->erase_opts.offset = ds->off; ++ ds->erase_opts.length = erasesize; ++ debug("Erasing 0x%x bytes @ offset 0x%x (jffs=%u)\n", ++ ds->erase_opts.length, ds->erase_opts.offset, ++ ds->erase_opts.jffs2); ++ rc = nand_erase_opts(ds->nand, &ds->erase_opts); ++ if (rc) { ++ debug("Error erasing\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errERASE; ++ return RET_STALL; ++ } ++ ++ ds->write_opts.buffer = ds->buf; ++ ds->write_opts.length = size; ++ ds->write_opts.offset = ds->off; ++ debug("Writing 0x%x bytes @ offset 0x%x\n", size, ds->off); ++ rc = nand_write_opts(ds->nand, &ds->write_opts); ++ if (rc) { ++ debug("Error writing\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errWRITE; ++ return RET_STALL; ++ } ++ ++ ds->off += size; ++ ds->ptr = ds->buf; ++ ++ /* FIXME: implement verify! */ ++ return RET_NOTHING; ++} ++ ++static int erase_tail_clean_nand(struct urb *urb, struct dnload_state *ds) ++{ ++ struct usb_device_instance *dev = urb->device; ++ int rc; ++ ++ ds->erase_opts.offset = ds->off; ++ ds->erase_opts.length = ds->part->size-ds->off; ++ debug("Erasing 0x%x bytes @ offset 0x%x (jffs=%u)\n", ++ ds->erase_opts.length, ds->erase_opts.offset, ++ ds->erase_opts.jffs2); ++ rc = nand_erase_opts(ds->nand, &ds->erase_opts); ++ if (rc) { ++ debug("Error erasing\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errERASE; ++ return RET_STALL; ++ } ++ ++ ds->off += ds->part->size; /* for consistency */ ++ ++ return RET_NOTHING; ++} ++ ++/* Read the next erase blcok from NAND into buffer */ ++static int read_next_nand(struct urb *urb, struct dnload_state *ds) ++{ ++ struct usb_device_instance *dev = urb->device; ++ int rc; ++ ++ ds->read_opts.buffer = ds->buf; ++ ds->read_opts.length = ds->nand->erasesize; ++ ds->read_opts.offset = ds->off; ++ ds->read_opts.quiet = 1; ++ ++ debug("Reading 0x%x@0x%x to 0x%08p\n", ds->nand->erasesize, ++ ds->off, ds->buf); ++ rc = nand_read_opts(ds->nand, &ds->read_opts); ++ if (rc) { ++ debug("Error reading\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errWRITE; ++ return RET_STALL; ++ } ++ ds->off += ds->nand->erasesize; ++ ds->ptr = ds->buf; ++ ++ return RET_NOTHING; ++} ++ ++ ++static int handle_dnload(struct urb *urb, u_int16_t val, u_int16_t len, int first) ++{ ++ struct usb_device_instance *dev = urb->device; ++ struct dnload_state *ds = &_dnstate; ++ unsigned int actual_len = len; ++ unsigned int remain_len; ++ unsigned long size; ++ int rc; ++ ++ debug("download(len=%u, first=%u) ", len, first); ++ ++ if (len > CONFIG_USBD_DFU_XFER_SIZE) { ++ /* Too big. Not that we'd really care, but it's a ++ * DFU protocol violation */ ++ debug("length exceeds flash page size "); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ return RET_STALL; ++ } ++ ++ if (first) { ++ /* Make sure that we have a valid mtd partition table */ ++ char *mtdp = getenv("mtdparts"); ++ if (!mtdp) ++ run_command("dynpart", 0); ++ } ++ ++ if (len == 0) { ++ debug("zero-size write -> MANIFEST_SYNC "); ++ dev->dfu_state = DFU_STATE_dfuMANIFEST_SYNC; ++ ++ /* cleanup */ ++ switch (dev->alternate) { ++ char buf[12]; ++ case 0: ++ sprintf(buf, "%lx", ds->ptr - ds->buf); ++ setenv("filesize", buf); ++ ds->ptr = ds->buf; ++ break; ++ case 1: ++ if (ds->ptr > ++ ds->buf + sizeof(struct uboot_dfu_trailer)) { ++ struct uboot_dfu_trailer trailer; ++ dfu_trailer_mirror(&trailer, ds->ptr); ++ if (!dfu_trailer_matching(&trailer)) { ++ printf("DFU TRAILER NOT OK\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errTARGET; ++ return RET_STALL; ++ } ++ ++ rc = erase_flash_verify_nand(urb, ds, ++ ds->part->size, ++ ds->part_net_size); ++ /* re-write dynenv marker in OOB */ ++ run_command("dynenv set u-boot_env", 0); ++ } ++ ds->nand = NULL; ++ free(ds->buf); ++ ds->ptr = ds->buf = ds->_buf; ++ break; ++ default: ++ rc = 0; ++ if (ds->ptr > ds->buf) ++ rc = erase_flash_verify_nand(urb, ds, ++ ds->nand->erasesize, ++ ds->nand->erasesize); ++ /* rootfs partition */ ++ if (!rc && dev->alternate == 5) ++ rc = erase_tail_clean_nand(urb, ds); ++ ++ ds->nand = NULL; ++ break; ++ } ++ ++ return RET_ZLP; ++ } ++ ++ if (urb->actual_length != len) { ++ debug("urb->actual_length(%u) != len(%u) ?!? ", ++ urb->actual_length, len); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ return RET_STALL; ++ } ++ ++ if (first && ds->buf && ds->buf != ds->_buf && ds->buf != LOAD_ADDR) { ++ free(ds->buf); ++ ds->buf = ds->_buf; ++ } ++ ++ switch (dev->alternate) { ++ case 0: ++ if (first) { ++ printf("Starting DFU DOWNLOAD to RAM (0x%08p)\n", ++ LOAD_ADDR); ++ ds->buf = LOAD_ADDR; ++ ds->ptr = ds->buf; ++ } ++ ++ memcpy(ds->ptr, urb->buffer, len); ++ ds->ptr += len; ++ break; ++ case 1: ++ if (first) { ++ rc = initialize_ds_nand(dev, ds); ++ if (rc) ++ return rc; ++ ds->buf = malloc(ds->part_net_size); ++ if (!ds->buf) { ++ printf("No memory for atomic buffer!!\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errUNKNOWN; ++ return RET_STALL; ++ } ++ ds->ptr = ds->buf; ++ printf("Starting Atomic DFU DOWNLOAD to partition '%s'\n", ++ ds->part->name); ++ } ++ ++ remain_len = (ds->buf + ds->part_net_size) - ds->ptr; ++ if (remain_len < len) { ++ len = remain_len; ++ printf("End of write exceeds partition end\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ return RET_STALL; ++ } ++ memcpy(ds->ptr, urb->buffer, len); ++ ds->ptr += len; ++ break; ++ default: ++ if (first) { ++ rc = initialize_ds_nand(dev, ds); ++ if (rc) ++ return rc; ++ printf("Starting DFU DOWNLOAD to partition '%s'\n", ++ ds->part->name); ++ } ++ ++ size = ds->nand->erasesize; ++ remain_len = ds->buf + size - ds->ptr; ++ if (remain_len < len) ++ actual_len = remain_len; ++ ++ memcpy(ds->ptr, urb->buffer, actual_len); ++ ds->ptr += actual_len; ++ ++ /* check partition end */ ++ if (ds->off + (ds->ptr - ds->buf) > ds->part->offset + ds->part->size) { ++ printf("End of write exceeds partition end\n"); ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ return RET_STALL; ++ } ++ ++ if (ds->ptr >= ds->buf + size) { ++ rc = erase_flash_verify_nand(urb, ds, ++ ds->nand->erasesize, ++ ds->nand->erasesize); ++ if (rc) ++ return rc; ++ /* copy remainder of data into buffer */ ++ memcpy(ds->ptr, urb->buffer + actual_len, len - actual_len); ++ ds->ptr += (len - actual_len); ++ } ++ break; ++ } ++ ++ return RET_ZLP; ++} ++ ++static int handle_upload(struct urb *urb, u_int16_t val, u_int16_t len, int first) ++{ ++ struct usb_device_instance *dev = urb->device; ++ struct dnload_state *ds = &_dnstate; ++ unsigned int remain; ++ int rc; ++ ++ debug("upload(val=0x%02x, len=%u, first=%u) ", val, len, first); ++ ++ if (len > CONFIG_USBD_DFU_XFER_SIZE) { ++ /* Too big */ ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ dev->dfu_status = DFU_STATUS_errADDRESS; ++ //udc_ep0_send_stall(); ++ debug("Error: Transfer size > CONFIG_USBD_DFU_XFER_SIZE "); ++ return -EINVAL; ++ } ++ ++ switch (dev->alternate) { ++ case 0: ++ if (first) { ++ printf("Starting DFU Upload of RAM (0x%08p)\n", ++ LOAD_ADDR); ++ ds->ptr = ds->buf; ++ } ++ ++ /* FIXME: end at some more dynamic point */ ++ if (ds->ptr + len > LOAD_ADDR + 0x200000) ++ len = (LOAD_ADDR + 0x200000) - ds->ptr; ++ ++ urb->buffer = ds->ptr; ++ urb->actual_length = len; ++ ds->ptr += len; ++ break; ++ default: ++ if (first) { ++ rc = initialize_ds_nand(dev, ds); ++ if (rc) ++ return -EINVAL; ++ printf("Starting DFU Upload of partition '%s'\n", ++ ds->part->name); ++ rc = read_next_nand(urb, ds); ++ if (rc) ++ return -EINVAL; ++ } ++ ++ if (len > ds->nand->erasesize) { ++ printf("We don't support transfers bigger than %u\n", ++ ds->nand->erasesize); ++ len = ds->nand->erasesize; ++ } ++ ++ remain = ds->nand->erasesize - (ds->ptr - ds->buf); ++ if (len < remain) ++ remain = len; ++ ++ debug("copying %u bytes ", remain); ++ urb->buffer = ds->ptr; ++ ds->ptr += remain; ++ urb->actual_length = remain; ++ ++ if (ds->ptr >= ds->buf + ds->nand->erasesize && ++ ds->off < ds->part->offset + ds->part->size) { ++ rc = read_next_nand(urb, ds); ++ if (rc) ++ return -EINVAL; ++ if (len > remain) { ++ debug("copying another %u bytes ", len - remain); ++ memcpy(urb->buffer + remain, ds->ptr, len - remain); ++ ds->ptr += (len - remain); ++ urb->actual_length += (len - remain); ++ } ++ } ++ break; ++ } ++ ++ debug("returning len=%u\n", len); ++ return len; ++} ++ ++static void handle_getstatus(struct urb *urb, int max) ++{ ++ struct usb_device_instance *dev = urb->device; ++ struct dfu_status *dstat = (struct dfu_status *) urb->buffer; ++ ++ debug("getstatus "); ++ ++ if (!urb->buffer || urb->buffer_length < sizeof(*dstat)) { ++ debug("invalid urb! "); ++ return; ++ } ++ ++ switch (dev->dfu_state) { ++ case DFU_STATE_dfuDNLOAD_SYNC: ++ case DFU_STATE_dfuDNBUSY: ++#if 0 ++ if (fsr & AT91C_MC_PROGE) { ++ debug("errPROG "); ++ dev->dfu_status = DFU_STATUS_errPROG; ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ } else if (fsr & AT91C_MC_LOCKE) { ++ debug("errWRITE "); ++ dev->dfu_status = DFU_STATUS_errWRITE; ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ } else if (fsr & AT91C_MC_FRDY) { ++#endif ++ debug("DNLOAD_IDLE "); ++ dev->dfu_state = DFU_STATE_dfuDNLOAD_IDLE; ++#if 0 ++ } else { ++ debug("DNBUSY "); ++ dev->dfu_state = DFU_STATE_dfuDNBUSY; ++ } ++#endif ++ break; ++ case DFU_STATE_dfuMANIFEST_SYNC: ++ break; ++ default: ++ //return; ++ break; ++ } ++ ++ /* send status response */ ++ dstat->bStatus = dev->dfu_status; ++ dstat->bState = dev->dfu_state; ++ dstat->iString = 0; ++ /* FIXME: set dstat->bwPollTimeout */ ++ urb->actual_length = MIN(sizeof(*dstat), max); ++ ++ /* we don't need to explicitly send data here, will ++ * be done by the original caller! */ ++} ++ ++static void handle_getstate(struct urb *urb, int max) ++{ ++ debug("getstate "); ++ ++ if (!urb->buffer || urb->buffer_length < sizeof(u_int8_t)) { ++ debug("invalid urb! "); ++ return; ++ } ++ ++ urb->buffer[0] = urb->device->dfu_state & 0xff; ++ urb->actual_length = sizeof(u_int8_t); ++} ++ ++#ifndef CONFIG_USBD_PRODUCTID_DFU ++#define CONFIG_USBD_PRODUCTID_DFU CONFIG_USBD_PRODUCTID_CDCACM ++#endif ++ ++static const struct usb_device_descriptor dfu_dev_descriptor = { ++ .bLength = USB_DT_DEVICE_SIZE, ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = 0x0100, ++ .bDeviceClass = 0x00, ++ .bDeviceSubClass = 0x00, ++ .bDeviceProtocol = 0x00, ++ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE, ++ .idVendor = CONFIG_USBD_VENDORID, ++ .idProduct = CONFIG_USBD_PRODUCTID_DFU, ++ .bcdDevice = 0x0000, ++ .iManufacturer = DFU_STR_MANUFACTURER, ++ .iProduct = DFU_STR_PRODUCT, ++ .iSerialNumber = DFU_STR_SERIAL, ++ .bNumConfigurations = 0x01, ++}; ++ ++static const struct _dfu_desc dfu_cfg_descriptor = { ++ .ucfg = { ++ .bLength = USB_DT_CONFIG_SIZE, ++ .bDescriptorType = USB_DT_CONFIG, ++ .wTotalLength = USB_DT_CONFIG_SIZE + ++ DFU_NUM_ALTERNATES * USB_DT_INTERFACE_SIZE + ++ USB_DT_DFU_SIZE, ++ .bNumInterfaces = 5, ++ .bConfigurationValue = 1, ++ .iConfiguration = DFU_STR_CONFIG, ++ .bmAttributes = BMATTRIBUTE_RESERVED, ++ .bMaxPower = 50, ++ }, ++ .uif[0] = { ++ .bLength = USB_DT_INTERFACE_SIZE, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x00, ++ .bAlternateSetting = 0x00, ++ .bNumEndpoints = 0x00, ++ .bInterfaceClass = 0xfe, ++ .bInterfaceSubClass = 0x01, ++ .bInterfaceProtocol = 0x02, ++ .iInterface = DFU_STR_ALT0, ++ }, ++ .uif[1] = { ++ .bLength = USB_DT_INTERFACE_SIZE, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x00, ++ .bAlternateSetting = 0x01, ++ .bNumEndpoints = 0x00, ++ .bInterfaceClass = 0xfe, ++ .bInterfaceSubClass = 0x01, ++ .bInterfaceProtocol = 0x02, ++ .iInterface = DFU_STR_ALT1, ++ }, ++ .uif[2] = { ++ .bLength = USB_DT_INTERFACE_SIZE, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x00, ++ .bAlternateSetting = 0x02, ++ .bNumEndpoints = 0x00, ++ .bInterfaceClass = 0xfe, ++ .bInterfaceSubClass = 0x01, ++ .bInterfaceProtocol = 0x02, ++ .iInterface = DFU_STR_ALT2, ++ }, ++ .uif[3] = { ++ .bLength = USB_DT_INTERFACE_SIZE, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x00, ++ .bAlternateSetting = 0x03, ++ .bNumEndpoints = 0x00, ++ .bInterfaceClass = 0xfe, ++ .bInterfaceSubClass = 0x01, ++ .bInterfaceProtocol = 0x02, ++ .iInterface = DFU_STR_ALT3, ++ }, ++ .uif[4] = { ++ .bLength = USB_DT_INTERFACE_SIZE, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x00, ++ .bAlternateSetting = 0x04, ++ .bNumEndpoints = 0x00, ++ .bInterfaceClass = 0xfe, ++ .bInterfaceSubClass = 0x01, ++ .bInterfaceProtocol = 0x02, ++ .iInterface = DFU_STR_ALT4, ++ }, ++ .uif[5] = { ++ .bLength = USB_DT_INTERFACE_SIZE, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x00, ++ .bAlternateSetting = 0x05, ++ .bNumEndpoints = 0x00, ++ .bInterfaceClass = 0xfe, ++ .bInterfaceSubClass = 0x01, ++ .bInterfaceProtocol = 0x02, ++ .iInterface = DFU_STR_ALT5, ++ }, ++ .func_dfu = DFU_FUNC_DESC, ++}; ++ ++int dfu_ep0_handler(struct urb *urb) ++{ ++ int rc, ret = RET_NOTHING; ++ u_int8_t req = urb->device_request.bRequest; ++ u_int16_t val = urb->device_request.wValue; ++ u_int16_t len = urb->device_request.wLength; ++ struct usb_device_instance *dev = urb->device; ++ ++ debug("dfu_ep0(req=0x%x, val=0x%x, len=%u) old_state = %u ", ++ req, val, len, dev->dfu_state); ++ ++ switch (dev->dfu_state) { ++ case DFU_STATE_appIDLE: ++ switch (req) { ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ case USB_REQ_DFU_DETACH: ++ dev->dfu_state = DFU_STATE_appDETACH; ++ ret = RET_ZLP; ++ goto out; ++ break; ++ default: ++ ret = RET_STALL; ++ } ++ break; ++ case DFU_STATE_appDETACH: ++ switch (req) { ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_appIDLE; ++ ret = RET_STALL; ++ goto out; ++ break; ++ } ++ /* FIXME: implement timer to return to appIDLE */ ++ break; ++ case DFU_STATE_dfuIDLE: ++ switch (req) { ++ case USB_REQ_DFU_DNLOAD: ++ if (len == 0) { ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ goto out; ++ } ++ dev->dfu_state = DFU_STATE_dfuDNLOAD_SYNC; ++ ret = handle_dnload(urb, val, len, 1); ++ break; ++ case USB_REQ_DFU_UPLOAD: ++ dev->dfu_state = DFU_STATE_dfuUPLOAD_IDLE; ++ handle_upload(urb, val, len, 1); ++ break; ++ case USB_REQ_DFU_ABORT: ++ /* no zlp? */ ++ ret = RET_ZLP; ++ break; ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ case USB_REQ_DFU_DETACH: ++ /* Proprietary extension: 'detach' from idle mode and ++ * get back to runtime mode in case of USB Reset. As ++ * much as I dislike this, we just can't use every USB ++ * bus reset to switch back to runtime mode, since at ++ * least the Linux USB stack likes to send a number of resets ++ * in a row :( */ ++ dev->dfu_state = DFU_STATE_dfuMANIFEST_WAIT_RST; ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ goto out; ++ break; ++ } ++ break; ++ case DFU_STATE_dfuDNLOAD_SYNC: ++ switch (req) { ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ /* FIXME: state transition depending on block completeness */ ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ goto out; ++ } ++ break; ++ case DFU_STATE_dfuDNBUSY: ++ switch (req) { ++ case USB_REQ_DFU_GETSTATUS: ++ /* FIXME: only accept getstatus if bwPollTimeout ++ * has elapsed */ ++ handle_getstatus(urb, len); ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ goto out; ++ } ++ break; ++ case DFU_STATE_dfuDNLOAD_IDLE: ++ switch (req) { ++ case USB_REQ_DFU_DNLOAD: ++ dev->dfu_state = DFU_STATE_dfuDNLOAD_SYNC; ++ ret = handle_dnload(urb, val, len, 0); ++ break; ++ case USB_REQ_DFU_ABORT: ++ dev->dfu_state = DFU_STATE_dfuIDLE; ++ ret = RET_ZLP; ++ break; ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ break; ++ } ++ break; ++ case DFU_STATE_dfuMANIFEST_SYNC: ++ switch (req) { ++ case USB_REQ_DFU_GETSTATUS: ++ /* We're MainfestationTolerant */ ++ dev->dfu_state = DFU_STATE_dfuIDLE; ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ break; ++ } ++ break; ++ case DFU_STATE_dfuMANIFEST: ++ /* we should never go here */ ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ break; ++ case DFU_STATE_dfuMANIFEST_WAIT_RST: ++ /* we should never go here */ ++ break; ++ case DFU_STATE_dfuUPLOAD_IDLE: ++ switch (req) { ++ case USB_REQ_DFU_UPLOAD: ++ /* state transition if less data then requested */ ++ rc = handle_upload(urb, val, len, 0); ++ if (rc >= 0 && rc < len) ++ dev->dfu_state = DFU_STATE_dfuIDLE; ++ break; ++ case USB_REQ_DFU_ABORT: ++ dev->dfu_state = DFU_STATE_dfuIDLE; ++ /* no zlp? */ ++ ret = RET_ZLP; ++ break; ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ break; ++ } ++ break; ++ case DFU_STATE_dfuERROR: ++ switch (req) { ++ case USB_REQ_DFU_GETSTATUS: ++ handle_getstatus(urb, len); ++ break; ++ case USB_REQ_DFU_GETSTATE: ++ handle_getstate(urb, len); ++ break; ++ case USB_REQ_DFU_CLRSTATUS: ++ dev->dfu_state = DFU_STATE_dfuIDLE; ++ dev->dfu_status = DFU_STATUS_OK; ++ /* no zlp? */ ++ ret = RET_ZLP; ++ break; ++ default: ++ dev->dfu_state = DFU_STATE_dfuERROR; ++ ret = RET_STALL; ++ break; ++ } ++ break; ++ default: ++ return DFU_EP0_UNHANDLED; ++ break; ++ } ++ ++out: ++ debug("new_state = %u, ret = %u\n", dev->dfu_state, ret); ++ ++ switch (ret) { ++ case RET_ZLP: ++ //udc_ep0_send_zlp(); ++ urb->actual_length = 0; ++ return DFU_EP0_ZLP; ++ break; ++ case RET_STALL: ++ //udc_ep0_send_stall(); ++ return DFU_EP0_STALL; ++ break; ++ case RET_NOTHING: ++ break; ++ } ++ ++ return DFU_EP0_DATA; ++} ++ ++void str2wide (char *str, u16 * wide); ++static struct usb_string_descriptor *create_usbstring(char *string) ++{ ++ struct usb_string_descriptor *strdesc; ++ int size = sizeof(*strdesc) + strlen(string)*2; ++ ++ if (size > 255) ++ return NULL; ++ ++ strdesc = malloc(size); ++ if (!strdesc) ++ return NULL; ++ ++ strdesc->bLength = size; ++ strdesc->bDescriptorType = USB_DT_STRING; ++ str2wide(string, strdesc->wData); ++ ++ return strdesc; ++} ++ ++ ++static void dfu_init_strings(struct usb_device_instance *dev) ++{ ++ int i; ++ struct usb_string_descriptor *strdesc; ++ ++ strdesc = create_usbstring(CONFIG_DFU_CFG_STR); ++ usb_strings[DFU_STR_CONFIG] = strdesc; ++ ++ for (i = 0; i < DFU_NUM_ALTERNATES; i++) { ++ if (i == 0) { ++ strdesc = create_usbstring(CONFIG_DFU_ALT0_STR); ++ } else { ++ struct part_info *part = get_partition_nand(i-1); ++ ++ if (part) ++ strdesc = create_usbstring(part->name); ++ else ++ strdesc = ++ create_usbstring("undefined partition"); ++ } ++ if (!strdesc) ++ continue; ++ usb_strings[STR_COUNT+i+1] = strdesc; ++ } ++} ++ ++int dfu_init_instance(struct usb_device_instance *dev) ++{ ++ dev->dfu_dev_desc = &dfu_dev_descriptor; ++ dev->dfu_cfg_desc = &dfu_cfg_descriptor; ++ dev->dfu_state = DFU_STATE_appIDLE; ++ dev->dfu_status = DFU_STATUS_OK; ++ ++ if (system_dfu_state) ++ printf("SURPRISE: system_dfu_state is already set\n"); ++ system_dfu_state = &dev->dfu_state; ++ ++ dfu_init_strings(dev); ++ ++ return 0; ++} ++ ++static int stdout_switched; ++ ++/* event handler for usb device state events */ ++void dfu_event(struct usb_device_instance *device, ++ usb_device_event_t event, int data) ++{ ++ char *out; ++ ++ switch (event) { ++ case DEVICE_RESET: ++ switch (device->dfu_state) { ++ case DFU_STATE_appDETACH: ++ device->dfu_state = DFU_STATE_dfuIDLE; ++ out = getenv("stdout"); ++ if (out && !strcmp(out, "usbtty")) { ++ setenv("stdout", "vga"); ++ setenv("stderr", "vga"); ++ stdout_switched = 1; ++ } ++ printf("DFU: Switching to DFU Mode\n"); ++ break; ++ case DFU_STATE_dfuMANIFEST_WAIT_RST: ++ device->dfu_state = DFU_STATE_appIDLE; ++ printf("DFU: Switching back to Runtime mode\n"); ++ if (stdout_switched) { ++ setenv("stdout", "usbtty"); ++ setenv("stderr", "usbtty"); ++ stdout_switched = 0; ++ } ++ break; ++ default: ++ break; ++ } ++ break; ++ case DEVICE_CONFIGURED: ++ case DEVICE_DE_CONFIGURED: ++ debug("SET_CONFIGURATION(%u) ", device->configuration); ++ /* fallthrough */ ++ case DEVICE_SET_INTERFACE: ++ debug("SET_INTERFACE(%u,%u) old_state = %u ", ++ device->interface, device->alternate, ++ device->dfu_state); ++ switch (device->dfu_state) { ++ case DFU_STATE_appIDLE: ++ case DFU_STATE_appDETACH: ++ case DFU_STATE_dfuIDLE: ++ case DFU_STATE_dfuMANIFEST_WAIT_RST: ++ /* do nothing, we're fine */ ++ break; ++ case DFU_STATE_dfuDNLOAD_SYNC: ++ case DFU_STATE_dfuDNBUSY: ++ case DFU_STATE_dfuDNLOAD_IDLE: ++ case DFU_STATE_dfuMANIFEST: ++ device->dfu_state = DFU_STATE_dfuERROR; ++ device->dfu_status = DFU_STATUS_errNOTDONE; ++ /* FIXME: free malloc()ed buffer! */ ++ break; ++ case DFU_STATE_dfuMANIFEST_SYNC: ++ case DFU_STATE_dfuUPLOAD_IDLE: ++ case DFU_STATE_dfuERROR: ++ device->dfu_state = DFU_STATE_dfuERROR; ++ device->dfu_status = DFU_STATUS_errUNKNOWN; ++ break; ++ } ++ debug("new_state = %u\n", device->dfu_state); ++ break; ++ default: ++ break; ++ } ++} ++#endif /* CONFIG_USBD_DFU */ +Index: u-boot/drivers/Makefile +=================================================================== +--- u-boot.orig/drivers/Makefile ++++ u-boot/drivers/Makefile +@@ -47,7 +47,7 @@ + status_led.o sym53c8xx.o systemace.o ahci.o \ + ti_pci1410a.o tigon3.o tsec.o \ + tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ +- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ ++ usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ + videomodes.o w83c553f.o \ + ks8695eth.o \ + pcf50606.o \ +Index: u-boot/drivers/usbdcore.c +=================================================================== +--- u-boot.orig/drivers/usbdcore.c ++++ u-boot/drivers/usbdcore.c +@@ -31,6 +31,7 @@ + + #include <malloc.h> + #include "usbdcore.h" ++#include <usb_dfu.h> + + #define MAX_INTERFACES 2 + +@@ -212,6 +213,10 @@ + */ + struct usb_device_descriptor *usbd_device_device_descriptor (struct usb_device_instance *device, int port) + { ++#ifdef CONFIG_USBD_DFU ++ if (device->dfu_state != DFU_STATE_appIDLE) ++ return device->dfu_dev_desc; ++#endif + return (device->device_descriptor); + } + +@@ -232,6 +237,10 @@ + if (!(configuration_instance = usbd_device_configuration_instance (device, port, configuration))) { + return NULL; + } ++#ifdef CONFIG_USBD_DFU ++ if (device->dfu_state != DFU_STATE_appIDLE) ++ return (&device->dfu_cfg_desc->ucfg); ++#endif + return (configuration_instance->configuration_descriptor); + } + +@@ -253,6 +262,13 @@ + if (!(interface_instance = usbd_device_interface_instance (device, port, configuration, interface))) { + return NULL; + } ++#ifdef CONFIG_USBD_DFU ++ if (device->dfu_state != DFU_STATE_appIDLE) { ++ if (alternate < 0 || alternate >= DFU_NUM_ALTERNATES) ++ return NULL; ++ return &device->dfu_cfg_desc->uif[alternate]; ++ } ++#endif + if ((alternate < 0) || (alternate >= interface_instance->alternates)) { + return NULL; + } +@@ -681,4 +697,7 @@ + /* usbdbg("calling device->event"); */ + device->event(device, event, data); + } ++#ifdef CONFIG_USBD_DFU ++ dfu_event(device, event, data); ++#endif + } +Index: u-boot/drivers/usbtty.c +=================================================================== +--- u-boot.orig/drivers/usbtty.c ++++ u-boot/drivers/usbtty.c +@@ -31,6 +31,8 @@ + #include "usbtty.h" + #include "usb_cdc_acm.h" + #include "usbdescriptors.h" ++#include <usb_dfu_descriptors.h> ++#include <usb_dfu.h> + #include <config.h> /* If defined, override Linux identifiers with + * vendor specific ones */ + +@@ -118,7 +120,7 @@ + static unsigned short rx_endpoint = 0; + static unsigned short tx_endpoint = 0; + static unsigned short interface_count = 0; +-static struct usb_string_descriptor *usbtty_string_table[STR_COUNT]; ++static struct usb_string_descriptor *usbtty_string_table[NUM_STRINGS]; + + /* USB Descriptor Strings */ + static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4}; +@@ -169,6 +171,10 @@ + struct usb_interface_descriptor data_class_interface; + struct usb_endpoint_descriptor + data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed)); ++#ifdef CONFIG_USBD_DFU ++ struct usb_interface_descriptor uif_dfu; ++ struct usb_dfu_func_descriptor func_dfu; ++#endif + } __attribute__((packed)); + + static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = { +@@ -179,7 +185,11 @@ + .bDescriptorType = USB_DT_CONFIG, + .wTotalLength = + cpu_to_le16(sizeof(struct acm_config_desc)), ++#ifdef CONFIG_USBD_DFU ++ .bNumInterfaces = NUM_ACM_INTERFACES +1, ++#else + .bNumInterfaces = NUM_ACM_INTERFACES, ++#endif + .bConfigurationValue = 1, + .iConfiguration = STR_CONFIG, + .bmAttributes = +@@ -278,6 +288,11 @@ + .bInterval = 0xFF, + }, + }, ++#ifdef CONFIG_USBD_DFU ++ /* Interface 3 */ ++ .uif_dfu = DFU_RT_IF_DESC, ++ .func_dfu = DFU_FUNC_DESC, ++#endif + }, + }; + +@@ -390,7 +405,7 @@ + void usbtty_poll (void); + + /* utility function for converting char* to wide string used by USB */ +-static void str2wide (char *str, u16 * wide) ++void str2wide (char *str, u16 * wide) + { + int i; + for (i = 0; i < strlen (str) && str[i]; i++){ +@@ -652,6 +667,9 @@ + device_instance->bus = bus_instance; + device_instance->configurations = NUM_CONFIGS; + device_instance->configuration_instance_array = config_instance; ++#ifdef CONFIG_USBD_DFU ++ dfu_init_instance(device_instance); ++#endif + + /* initialize bus instance */ + memset (bus_instance, 0, sizeof (struct usb_bus_instance)); +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -167,7 +167,7 @@ + */ + #define CONFIG_STACKSIZE (128*1024) /* regular stack */ + #ifdef CONFIG_USE_IRQ +-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ + #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ + #endif + +@@ -184,6 +184,10 @@ + #define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" + #define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION + #define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ ++#define CONFIG_USBD_DFU_INTERFACE 2 ++ + + /*----------------------------------------------------------------------- + * Physical Memory Map +Index: u-boot/include/usb_dfu.h +=================================================================== +--- /dev/null ++++ u-boot/include/usb_dfu.h +@@ -0,0 +1,99 @@ ++#ifndef _DFU_H ++#define _DFU_H ++ ++/* USB Device Firmware Update Implementation for u-boot ++ * (C) 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on: USB Device Firmware Update Implementation for OpenPCD ++ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> ++ * ++ * This ought to be compliant to the USB DFU Spec 1.0 as available from ++ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <asm/types.h> ++#include <usbdescriptors.h> ++#include <usb_dfu_descriptors.h> ++#include <config.h> ++ ++/* USB DFU functional descriptor */ ++#define DFU_FUNC_DESC { \ ++ .bLength = USB_DT_DFU_SIZE, \ ++ .bDescriptorType = USB_DT_DFU, \ ++ .bmAttributes = USB_DFU_CAN_UPLOAD | USB_DFU_CAN_DOWNLOAD | USB_DFU_MANIFEST_TOL, \ ++ .wDetachTimeOut = 0xff00, \ ++ .wTransferSize = CONFIG_USBD_DFU_XFER_SIZE, \ ++ .bcdDFUVersion = 0x0100, \ ++} ++ ++/* USB Interface descriptor in Runtime mode */ ++#define DFU_RT_IF_DESC { \ ++ .bLength = USB_DT_INTERFACE_SIZE, \ ++ .bDescriptorType = USB_DT_INTERFACE, \ ++ .bInterfaceNumber = CONFIG_USBD_DFU_INTERFACE, \ ++ .bAlternateSetting = 0x00, \ ++ .bNumEndpoints = 0x00, \ ++ .bInterfaceClass = 0xfe, \ ++ .bInterfaceSubClass = 0x01, \ ++ .bInterfaceProtocol = 0x01, \ ++ .iInterface = DFU_STR_CONFIG, \ ++} ++ ++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) ++ ++#define DFU_NUM_ALTERNATES 6 ++ ++#define DFU_STR_MANUFACTURER STR_MANUFACTURER ++#define DFU_STR_PRODUCT STR_PRODUCT ++#define DFU_STR_SERIAL STR_SERIAL ++#define DFU_STR_CONFIG (STR_COUNT) ++#define DFU_STR_ALT0 (STR_COUNT+1) ++#define DFU_STR_ALT1 (STR_COUNT+2) ++#define DFU_STR_ALT2 (STR_COUNT+3) ++#define DFU_STR_ALT3 (STR_COUNT+4) ++#define DFU_STR_ALT4 (STR_COUNT+5) ++#define DFU_STR_ALT5 (STR_COUNT+6) ++#define DFU_STR_COUNT (STR_COUNT+7) ++ ++#define DFU_NUM_STRINGS (STR_COUNT+8) ++ ++#define CONFIG_DFU_CFG_STR "USB Device Firmware Upgrade" ++#define CONFIG_DFU_ALT0_STR "RAM 0x32000000" ++ ++struct _dfu_desc { ++ struct usb_configuration_descriptor ucfg; ++ struct usb_interface_descriptor uif[DFU_NUM_ALTERNATES]; ++ struct usb_dfu_func_descriptor func_dfu; ++}; ++ ++int dfu_init_instance(struct usb_device_instance *dev); ++ ++#define DFU_EP0_NONE 0 ++#define DFU_EP0_UNHANDLED 1 ++#define DFU_EP0_STALL 2 ++#define DFU_EP0_ZLP 3 ++#define DFU_EP0_DATA 4 ++ ++extern volatile enum dfu_state *system_dfu_state; /* for 3rd parties */ ++ ++int dfu_ep0_handler(struct urb *urb); ++ ++void dfu_event(struct usb_device_instance *device, ++ usb_device_event_t event, int data); ++ ++#endif /* _DFU_H */ +Index: u-boot/include/usb_dfu_descriptors.h +=================================================================== +--- /dev/null ++++ u-boot/include/usb_dfu_descriptors.h +@@ -0,0 +1,94 @@ ++#ifndef _USB_DFU_H ++#define _USB_DFU_H ++/* USB Device Firmware Update Implementation for OpenPCD ++ * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> ++ * ++ * Protocol definitions for USB DFU ++ * ++ * This ought to be compliant to the USB DFU Spec 1.0 as available from ++ * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include <linux/types.h> ++ ++#define USB_DT_DFU 0x21 ++ ++struct usb_dfu_func_descriptor { ++ u_int8_t bLength; ++ u_int8_t bDescriptorType; ++ u_int8_t bmAttributes; ++#define USB_DFU_CAN_DOWNLOAD (1 << 0) ++#define USB_DFU_CAN_UPLOAD (1 << 1) ++#define USB_DFU_MANIFEST_TOL (1 << 2) ++#define USB_DFU_WILL_DETACH (1 << 3) ++ u_int16_t wDetachTimeOut; ++ u_int16_t wTransferSize; ++ u_int16_t bcdDFUVersion; ++} __attribute__ ((packed)); ++ ++#define USB_DT_DFU_SIZE 9 ++ ++#define USB_TYPE_DFU (USB_TYPE_CLASS|USB_RECIP_INTERFACE) ++ ++/* DFU class-specific requests (Section 3, DFU Rev 1.1) */ ++#define USB_REQ_DFU_DETACH 0x00 ++#define USB_REQ_DFU_DNLOAD 0x01 ++#define USB_REQ_DFU_UPLOAD 0x02 ++#define USB_REQ_DFU_GETSTATUS 0x03 ++#define USB_REQ_DFU_CLRSTATUS 0x04 ++#define USB_REQ_DFU_GETSTATE 0x05 ++#define USB_REQ_DFU_ABORT 0x06 ++ ++struct dfu_status { ++ u_int8_t bStatus; ++ u_int8_t bwPollTimeout[3]; ++ u_int8_t bState; ++ u_int8_t iString; ++} __attribute__((packed)); ++ ++#define DFU_STATUS_OK 0x00 ++#define DFU_STATUS_errTARGET 0x01 ++#define DFU_STATUS_errFILE 0x02 ++#define DFU_STATUS_errWRITE 0x03 ++#define DFU_STATUS_errERASE 0x04 ++#define DFU_STATUS_errCHECK_ERASED 0x05 ++#define DFU_STATUS_errPROG 0x06 ++#define DFU_STATUS_errVERIFY 0x07 ++#define DFU_STATUS_errADDRESS 0x08 ++#define DFU_STATUS_errNOTDONE 0x09 ++#define DFU_STATUS_errFIRMWARE 0x0a ++#define DFU_STATUS_errVENDOR 0x0b ++#define DFU_STATUS_errUSBR 0x0c ++#define DFU_STATUS_errPOR 0x0d ++#define DFU_STATUS_errUNKNOWN 0x0e ++#define DFU_STATUS_errSTALLEDPKT 0x0f ++ ++enum dfu_state { ++ DFU_STATE_appIDLE = 0, ++ DFU_STATE_appDETACH = 1, ++ DFU_STATE_dfuIDLE = 2, ++ DFU_STATE_dfuDNLOAD_SYNC = 3, ++ DFU_STATE_dfuDNBUSY = 4, ++ DFU_STATE_dfuDNLOAD_IDLE = 5, ++ DFU_STATE_dfuMANIFEST_SYNC = 6, ++ DFU_STATE_dfuMANIFEST = 7, ++ DFU_STATE_dfuMANIFEST_WAIT_RST = 8, ++ DFU_STATE_dfuUPLOAD_IDLE = 9, ++ DFU_STATE_dfuERROR = 10, ++}; ++ ++#endif /* _USB_DFU_H */ +Index: u-boot/include/usbdcore.h +=================================================================== +--- u-boot.orig/include/usbdcore.h ++++ u-boot/include/usbdcore.h +@@ -33,6 +33,7 @@ + + #include <common.h> + #include "usbdescriptors.h" ++#include <usb_dfu_descriptors.h> + + + #define MAX_URBS_QUEUED 5 +@@ -475,7 +476,11 @@ + * function driver to inform it that data has arrived. + */ + ++#ifdef CONFIG_USBD_DFU ++#define URB_BUF_SIZE (128+CONFIG_USBD_DFU_XFER_SIZE) ++#else + #define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */ ++#endif + struct urb { + + struct usb_endpoint_instance *endpoint; +@@ -603,6 +608,12 @@ + unsigned long usbd_rxtx_timestamp; + unsigned long usbd_last_rxtx_timestamp; + ++#ifdef CONFIG_USBD_DFU ++ const struct usb_device_descriptor *dfu_dev_desc; ++ const struct _dfu_desc *dfu_cfg_desc; ++ enum dfu_state dfu_state; ++ u_int8_t dfu_status; ++#endif + }; + + /* Bus Interface configuration structure +@@ -632,6 +643,8 @@ + extern char *usbd_device_requests[]; + extern char *usbd_device_descriptors[]; + ++extern struct usb_string_descriptor **usb_strings; ++ + void urb_link_init (urb_link * ul); + void urb_detach (struct urb *urb); + urb_link *first_urb_link (urb_link * hd); +Index: u-boot/drivers/usbtty.h +=================================================================== +--- u-boot.orig/drivers/usbtty.h ++++ u-boot/drivers/usbtty.h +@@ -71,4 +71,10 @@ + #define STR_CTRL_INTERFACE 0x06 + #define STR_COUNT 0x07 + ++#ifdef CONFIG_USBD_DFU ++#define NUM_STRINGS DFU_STR_COUNT ++#else ++#define NUM_STRINGS STR_COUNT ++#endif ++ + #endif +Index: u-boot/include/configs/qt2410.h +=================================================================== +--- u-boot.orig/include/configs/qt2410.h ++++ u-boot/include/configs/qt2410.h +@@ -199,7 +199,8 @@ + #define CONFIG_USBD_PRODUCT_NAME "QT2410 Bootloader " U_BOOT_VERSION + #define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" + #define CONFIG_USBD_DFU 1 +-#define CONFIG_USBD_DFU_XFER_SIZE 0x4000 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 ++#define CONFIG_USBD_DFU_INTERFACE 2 + + /*----------------------------------------------------------------------- + * Physical Memory Map +Index: u-boot/tools/Makefile +=================================================================== +--- u-boot.orig/tools/Makefile ++++ u-boot/tools/Makefile +@@ -21,10 +21,10 @@ + # MA 02111-1307 USA + # + +-BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ++BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) mkudfu$(SFX) + + OBJ_LINKS = environment.o crc32.o +-OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o ++OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o mkudfu.o + + ifeq ($(ARCH),mips) + BIN_FILES += inca-swap-bytes$(SFX) +@@ -137,6 +137,10 @@ + $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(STRIP) $@ + ++$(obj)mkudfu$(SFX): $(obj)mkudfu.o ++ $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ ++ $(STRIP) $@ ++ + $(obj)ncb$(SFX): $(obj)ncb.o + $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(STRIP) $@ +Index: u-boot/tools/mkudfu.c +=================================================================== +--- /dev/null ++++ u-boot/tools/mkudfu.c +@@ -0,0 +1,314 @@ ++/* ++ * USB DFU file trailer tool ++ * (C) Copyright by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on mkimage.c, copyright information as follows: ++ * ++ * (C) Copyright 2000-2004 ++ * DENX Software Engineering ++ * Wolfgang Denk, wd@denx.de ++ * All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <errno.h> ++#include <fcntl.h> ++#include <stdio.h> ++#include <stdlib.h> ++#include <string.h> ++#ifndef __WIN32__ ++#include <netinet/in.h> /* for host / network byte order conversions */ ++#endif ++#include <sys/mman.h> ++#include <sys/stat.h> ++#include <time.h> ++#include <unistd.h> ++ ++#if defined(__BEOS__) || defined(__NetBSD__) || defined(__APPLE__) ++#include <inttypes.h> ++#endif ++ ++#ifdef __WIN32__ ++typedef unsigned int __u32; ++ ++#define SWAP_LONG(x) \ ++ ((__u32)( \ ++ (((__u32)(x) & (__u32)0x000000ffUL) << 24) | \ ++ (((__u32)(x) & (__u32)0x0000ff00UL) << 8) | \ ++ (((__u32)(x) & (__u32)0x00ff0000UL) >> 8) | \ ++ (((__u32)(x) & (__u32)0xff000000UL) >> 24) )) ++typedef unsigned char uint8_t; ++typedef unsigned short uint16_t; ++typedef unsigned int uint32_t; ++ ++#define ntohl(a) SWAP_LONG(a) ++#define htonl(a) SWAP_LONG(a) ++#endif /* __WIN32__ */ ++ ++#ifndef O_BINARY /* should be define'd on __WIN32__ */ ++#define O_BINARY 0 ++#endif ++ ++#include <usb_dfu_trailer.h> ++ ++extern int errno; ++ ++#ifndef MAP_FAILED ++#define MAP_FAILED (-1) ++#endif ++ ++static char *cmdname; ++ ++static char *datafile; ++static char *imagefile; ++ ++ ++static void usage() ++{ ++ fprintf (stderr, "%s - create / display u-boot DFU trailer\n", cmdname); ++ fprintf (stderr, "Usage: %s -l image\n" ++ " -l ==> list image header information\n" ++ " %s -v VID -p PID -r REV -d data_file image\n", ++ cmdname, cmdname); ++ fprintf (stderr, " -v ==> set vendor ID to 'VID'\n" ++ " -p ==> set product ID system to 'PID'\n" ++ " -r ==> set hardware revision to 'REV'\n" ++ " -d ==> use 'data_file' as input file\n" ++ ); ++ exit (EXIT_FAILURE); ++} ++ ++static void print_trailer(struct uboot_dfu_trailer *trailer) ++{ ++ printf("===> DFU Trailer information:\n"); ++ printf("Trailer Vers.: %d\n", trailer->version); ++ printf("Trailer Length: %d\n", trailer->length); ++ printf("VendorID: 0x%04x\n", trailer->vendor); ++ printf("ProductID: 0x%04x\n", trailer->product); ++ printf("HW Revision: 0x%04x\n", trailer->revision); ++} ++ ++static void copy_file (int ifd, const char *datafile, int pad) ++{ ++ int dfd; ++ struct stat sbuf; ++ unsigned char *ptr; ++ int tail; ++ int zero = 0; ++ int offset = 0; ++ int size; ++ ++ if ((dfd = open(datafile, O_RDONLY|O_BINARY)) < 0) { ++ fprintf (stderr, "%s: Can't open %s: %s\n", ++ cmdname, datafile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ if (fstat(dfd, &sbuf) < 0) { ++ fprintf (stderr, "%s: Can't stat %s: %s\n", ++ cmdname, datafile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ ptr = (unsigned char *)mmap(0, sbuf.st_size, ++ PROT_READ, MAP_SHARED, dfd, 0); ++ if (ptr == (unsigned char *)MAP_FAILED) { ++ fprintf (stderr, "%s: Can't read %s: %s\n", ++ cmdname, datafile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ size = sbuf.st_size - offset; ++ if (write(ifd, ptr + offset, size) != size) { ++ fprintf (stderr, "%s: Write error on %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ if (pad && ((tail = size % 4) != 0)) { ++ ++ if (write(ifd, (char *)&zero, 4-tail) != 4-tail) { ++ fprintf (stderr, "%s: Write error on %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ } ++ ++ (void) munmap((void *)ptr, sbuf.st_size); ++ (void) close (dfd); ++} ++ ++ ++int main(int argc, char **argv) ++{ ++ int ifd; ++ int lflag = 0; ++ struct stat sbuf; ++ u_int16_t opt_vendor, opt_product, opt_revision; ++ struct uboot_dfu_trailer _hdr, _mirror, *hdr = &_hdr; ++ ++ opt_vendor = opt_product = opt_revision = 0; ++ ++ cmdname = *argv; ++ ++ while (--argc > 0 && **++argv == '-') { ++ while (*++*argv) { ++ switch (**argv) { ++ case 'l': ++ lflag = 1; ++ break; ++ case 'v': ++ if (--argc <= 0) ++ usage (); ++ opt_vendor = strtoul(*++argv, NULL, 16); ++ goto NXTARG; ++ case 'p': ++ if (--argc <= 0) ++ usage (); ++ opt_product = strtoul(*++argv, NULL, 16); ++ goto NXTARG; ++ case 'r': ++ if (--argc <= 0) ++ usage (); ++ opt_revision = strtoul(*++argv, NULL, 16); ++ goto NXTARG; ++ case 'd': ++ if (--argc <= 0) ++ usage (); ++ datafile = *++argv; ++ goto NXTARG; ++ case 'h': ++ usage(); ++ break; ++ default: ++ usage(); ++ } ++ } ++NXTARG: ; ++ } ++ ++ if (argc != 1) ++ usage(); ++ ++ imagefile = *argv; ++ ++ if (lflag) ++ ifd = open(imagefile, O_RDONLY|O_BINARY); ++ else ++ ifd = open(imagefile, O_RDWR|O_CREAT|O_TRUNC|O_BINARY, 0666); ++ ++ if (ifd < 0) { ++ fprintf (stderr, "%s: Can't open %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ if (lflag) { ++ unsigned char *ptr; ++ /* list header information of existing image */ ++ if (fstat(ifd, &sbuf) < 0) { ++ fprintf (stderr, "%s: Can't stat %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ if ((unsigned)sbuf.st_size < sizeof(struct uboot_dfu_trailer)) { ++ fprintf (stderr, ++ "%s: Bad size: \"%s\" is no valid image\n", ++ cmdname, imagefile); ++ exit (EXIT_FAILURE); ++ } ++ ++ ptr = (unsigned char *)mmap(0, sbuf.st_size, ++ PROT_READ, MAP_SHARED, ifd, 0); ++ if ((caddr_t)ptr == (caddr_t)-1) { ++ fprintf (stderr, "%s: Can't read %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ dfu_trailer_mirror(hdr, ptr+sbuf.st_size); ++ ++ if (hdr->magic != UBOOT_DFU_TRAILER_MAGIC) { ++ fprintf (stderr, ++ "%s: Bad Magic Number: \"%s\" is no valid image\n", ++ cmdname, imagefile); ++ exit (EXIT_FAILURE); ++ } ++ ++ /* for multi-file images we need the data part, too */ ++ print_trailer(hdr); ++ ++ (void) munmap((void *)ptr, sbuf.st_size); ++ (void) close (ifd); ++ ++ exit (EXIT_SUCCESS); ++ } ++ ++ /* if we're not listing: */ ++ ++ copy_file (ifd, datafile, 0); ++ ++ memset (hdr, 0, sizeof(struct uboot_dfu_trailer)); ++ ++ /* Build new header */ ++ hdr->version = UBOOT_DFU_TRAILER_V1; ++ hdr->magic = UBOOT_DFU_TRAILER_MAGIC; ++ hdr->length = sizeof(struct uboot_dfu_trailer); ++ hdr->vendor = opt_vendor; ++ hdr->product = opt_product; ++ hdr->revision = opt_revision; ++ ++ print_trailer(hdr); ++ dfu_trailer_mirror(&_mirror, (unsigned char *)hdr+sizeof(*hdr)); ++ ++ if (write(ifd, &_mirror, sizeof(struct uboot_dfu_trailer)) ++ != sizeof(struct uboot_dfu_trailer)) { ++ fprintf (stderr, "%s: Write error on %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ /* We're a bit of paranoid */ ++#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) ++ (void) fdatasync (ifd); ++#else ++ (void) fsync (ifd); ++#endif ++ ++ if (fstat(ifd, &sbuf) < 0) { ++ fprintf (stderr, "%s: Can't stat %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ /* We're a bit of paranoid */ ++#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) ++ (void) fdatasync (ifd); ++#else ++ (void) fsync (ifd); ++#endif ++ ++ if (close(ifd)) { ++ fprintf (stderr, "%s: Write error on %s: %s\n", ++ cmdname, imagefile, strerror(errno)); ++ exit (EXIT_FAILURE); ++ } ++ ++ exit (EXIT_SUCCESS); ++} +Index: u-boot/include/usb_dfu_trailer.h +=================================================================== +--- /dev/null ++++ u-boot/include/usb_dfu_trailer.h +@@ -0,0 +1,31 @@ ++#ifndef _USB_DFU_TRAILER_H ++#define _USB_DFU_TRAILER_H ++ ++/* trailer handling for DFU files */ ++ ++#define UBOOT_DFU_TRAILER_V1 1 ++#define UBOOT_DFU_TRAILER_MAGIC 0x19731978 ++struct uboot_dfu_trailer { ++ u_int32_t magic; ++ u_int16_t version; ++ u_int16_t length; ++ u_int16_t vendor; ++ u_int16_t product; ++ u_int32_t revision; ++} __attribute__((packed)); ++ ++/* we mirror the trailer because we want it to be longer in later versions ++ * while keeping backwards compatibility */ ++static inline void dfu_trailer_mirror(struct uboot_dfu_trailer *trailer, ++ unsigned char *eof) ++{ ++ int i; ++ int len = sizeof(struct uboot_dfu_trailer); ++ unsigned char *src = eof - len; ++ unsigned char *dst = (unsigned char *) trailer; ++ ++ for (i = 0; i < len; i++) ++ dst[len-1-i] = src[i]; ++} ++ ++#endif /* _USB_DFU_TRAILER_H */ +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -261,6 +261,12 @@ + $(obj)u-boot.bin: $(obj)u-boot + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + ++$(obj)u-boot.udfu: $(obj)u-boot.bin ++ ./tools/mkudfu -v $(CONFIG_USB_DFU_VENDOR) \ ++ -p $(CONFIG_USB_DFU_PRODUCT) \ ++ -r $(CONFIG_USB_DFU_REVISION) \ ++ -d $< $@ ++ + $(obj)u-boot.img: $(obj)u-boot.bin + ./tools/mkimage -A $(ARCH) -T firmware -C none \ + -a $(TEXT_BASE) -e 0 \ +Index: u-boot/board/neo1973/gta01/split_by_variant.sh +=================================================================== +--- u-boot.orig/board/neo1973/gta01/split_by_variant.sh ++++ u-boot/board/neo1973/gta01/split_by_variant.sh +@@ -15,37 +15,44 @@ + echo "$0:: No parameters - using GTA01Bv3 config" + echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC + echo "GTA01_BIG_RAM=y" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0230" > $CFGTMP + else + case "$1" in + gta01v4_config) + echo "#define CONFIG_ARCH_GTA01_v4" > $CFGINC + echo "GTA01_BIG_RAM=n" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0140" > $CFGTMP + ;; + + gta01v3_config) + echo "#define CONFIG_ARCH_GTA01_v3" > $CFGINC + echo "GTA01_BIG_RAM=n" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0130" > $CFGTMP + ;; + + gta01bv2_config) + echo "#define CONFIG_ARCH_GTA01B_v2" > $CFGINC + echo "GTA01_BIG_RAM=y" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0220" > $CFGTMP + ;; + + gta01bv3_config) + echo "#define CONFIG_ARCH_GTA01B_v3" > $CFGINC + echo "GTA01_BIG_RAM=y" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0230" > $CFGTMP + ;; + + gta01bv4_config) + echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC + echo "GTA01_BIG_RAM=y" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0240" > $CFGTMP + ;; + + *) + echo "$0:: Unrecognised config - using GTA01Bv4 config" + echo "#define CONFIG_ARCH_GTA01B_v4" > $CFGINC + echo "GTA01_BIG_RAM=y" > $CFGTMP ++ echo "CONFIG_USB_DFU_REVISION=0x0240" > $CFGTMP + ;; + + esac +Index: u-boot/board/neo1973/gta01/config.mk +=================================================================== +--- u-boot.orig/board/neo1973/gta01/config.mk ++++ u-boot/board/neo1973/gta01/config.mk +@@ -24,6 +24,9 @@ + # + # download area is 3200'0000 or 3300'0000 + ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x5119 ++ + sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + + ifeq ($(GTA01_BIG_RAM),y) diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-gta02.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-gta02.patch new file mode 100644 index 0000000000..ca54ebeff7 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-gta02.patch @@ -0,0 +1,1560 @@ +Add support for new GTA02 version of Neo1973 + +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2038,6 +2038,10 @@ + sbc2410x_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 + ++gta02_config \ ++gta02v1_config : unconfig ++ @sh board/neo1973/gta02/split_by_variant.sh $@ ++ + gta01_config \ + gta01v3_config \ + gta01bv2_config \ +Index: u-boot/board/neo1973/gta02/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/Makefile +@@ -0,0 +1,64 @@ ++# ++# (C) Copyright 2000, 2001, 2002 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = lib$(BOARD).a ++ ++OBJS := gta02.o pcf50633.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o ../common/bootmenu.o ++SOBJS := ../common/lowlevel_init.o ++ ++.PHONY: all ++ ++all: $(LIB) lowevel_foo.bin ++ ++$(LIB): $(OBJS) $(SOBJS) ++ $(AR) crv $@ $(OBJS) $(SOBJS) ++ ++lowlevel_foo.o: ../common/lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o ../common/lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o ../common/lowlevel_init.o ../common/lowlevel_foo.lds ++ $(LD) -T ../common/lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ ../common/lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) lowlevel_foo lowlevel_foo.o ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend lowlevel_foo.bin ++ ++######################################################################### ++ ++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) ++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ ++ ++-include .depend ++ ++######################################################################### +Index: u-boot/board/neo1973/gta02/gta02.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/gta02.c +@@ -0,0 +1,313 @@ ++/* ++ * (C) 2006-2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on existing S3C2410 startup code in u-boot: ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <s3c2440.h> ++#include <i2c.h> ++ ++#include "../common/neo1973.h" ++#include "../common/jbt6k74.h" ++ ++#include "pcf50633.h" ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++/* That many seconds the power key needs to be pressed to power up */ ++#define POWER_KEY_SECONDS 2 ++ ++#define M_MDIV 0x7f /* Fout = 405.00MHz */ ++#define M_PDIV 0x2 ++#define M_SDIV 0x1 ++ ++#define U_M_MDIV 0x38 ++#define U_M_PDIV 0x2 ++#define U_M_SDIV 0x2 ++ ++unsigned int neo1973_wakeup_cause; ++extern int nobootdelay; ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++#if defined(CONFIG_ARCH_GTA02_v1) ++ gpio->GPACON = 0x007E1FFF; ++ gpio->GPADAT |= (1 << 16); /* Set GPA16 to high (nNAND_WP) */ ++ ++ gpio->GPBCON = 0x00155555; ++ gpio->GPBUP = 0x000007FF; ++ ++ gpio->GPCCON = 0x55551155; ++ gpio->GPCUP = 0x0000FFFF; ++ ++ gpio->GPDCON = 0x55555555; ++ gpio->GPDUP = 0x0000FFFF; ++ ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ ++ gpio->GPFCON = 0x0000AAAA; ++ gpio->GPFUP = 0x000000FF; ++ ++ gpio->GPGCON = 0x013DFDFA; ++ gpio->GPGUP = 0x0000FFFF; ++ ++ gpio->GPHCON = 0x0028AAAA; ++ gpio->GPHUP = 0x000007FF; ++ ++ gpio->GPJCON = 0x1545541; ++#else ++#error Please define GTA02 version ++#endif ++ ++ /* arch number of SMDK2410-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_NEO1973_GTA02; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++int board_late_init(void) ++{ ++ extern unsigned char booted_from_nand; ++ unsigned char tmp; ++ char buf[32]; ++ int menu_vote = 0; /* <= 0: no, > 0: yes */ ++ int seconds = 0; ++ ++ /* Initialize the Power Management Unit with a safe register set */ ++ pcf50633_init(); ++#if 0 ++ /* if there's no other reason, must be regular reset */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; ++ ++ if (!booted_from_nand) ++ goto woken_by_reset; ++ ++ /* obtain wake-up reason, save INT1 in environment */ ++ tmp = pcf50606_reg_read(PCF50606_REG_INT1); ++ sprintf(buf, "0x%02x", tmp); ++ setenv("pcf50606_int1", buf); ++ ++ if (tmp & PCF50606_INT1_ALARM) { ++ /* we've been woken up by RTC alarm, boot */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_ALARM; ++ goto continue_boot; ++ } ++ if (tmp & PCF50606_INT1_EXTONR) { ++ /* we've been woken up by charger insert */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_CHARGER; ++ } ++ ++ if (tmp & PCF50606_INT1_ONKEYF) { ++ /* we've been woken up by a falling edge of the onkey */ ++ neo1973_wakeup_cause = NEO1973_WAKEUP_POWER_KEY; ++ } ++ ++ if (neo1973_wakeup_cause == NEO1973_WAKEUP_CHARGER) { ++ /* if we still think it was only a charger insert, boot */ ++ goto continue_boot; ++ } ++ ++woken_by_reset: ++ ++ while (neo1973_wakeup_cause == NEO1973_WAKEUP_RESET || ++ neo1973_on_key_pressed()) { ++ if (neo1973_aux_key_pressed()) ++ menu_vote++; ++ else ++ menu_vote--; ++ ++ if (neo1973_new_second()) ++ seconds++; ++ if (seconds >= POWER_KEY_SECONDS) ++ goto continue_boot; ++ } ++ /* Power off if minimum number of seconds not reached */ ++ neo1973_poweroff(); ++ ++continue_boot: ++ jbt6k74_init(); ++ jbt6k74_enter_state(JBT_STATE_NORMAL); ++ jbt6k74_display_onoff(1); ++#endif ++ ++ /* issue a short pulse with the vibrator */ ++ neo1973_vibrator(1); ++ udelay(50000); ++ neo1973_vibrator(0); ++ ++ /* switch on the backlight */ ++ neo1973_backlight(1); ++ ++#if 0 ++ { ++ /* check if sd card is inserted, and power-up if it is */ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (!(gpio->GPFDAT & (1 << 5))) ++ gpio->GPBDAT &= ~(1 << 2); ++ } ++ ++ if (menu_vote > 0) { ++ bootmenu(); ++ nobootdelay = 1; ++ } ++#endif ++ ++ return 0; ++} ++ ++int dram_init (void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++u_int32_t get_board_rev(void) ++{ ++#if defined(CONFIG_ARCH_GTA02_v1) ++ return 0x00000310; ++#endif ++} ++ ++void neo1973_poweroff(void) ++{ ++ printf("poweroff\n"); ++ udc_disconnect(); ++ pcf50633_reg_write(PCF50633_REG_OOCSHDWN, 0x01); ++ /* don't return to caller */ ++ while (1) ; ++} ++ ++void neo1973_backlight(int on) ++{ ++ /* FIXME: PMU based implementation */ ++} ++ ++/* FIXME: shared */ ++void neo1973_vibrator(int on) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (on) ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++ gpio->GPGDAT |= (1 << 11); /* GPG11 */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ gpio->GPBDAT |= (1 << 10); /* GPB10 */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) ++ gpio->GPBDAT |= (1 << 3); /* GPB3 */ ++#endif ++ else ++#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) ++ gpio->GPGDAT &= ~(1 << 11); /* GPG11 */ ++#elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) ++ gpio->GPBDAT &= ~(1 << 10); /* GPB10 */ ++#elif defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) ++ gpio->GPBDAT &= ~(1 << 3); /* GPB3 */ ++#endif ++} ++ ++int neo1973_new_second(void) ++{ ++ return pcf50633_reg_read(PCF50633_REG_INT1) & PCF50633_INT1_SECOND; ++} ++ ++int neo1973_on_key_pressed(void) ++{ ++ return !(pcf50633_reg_read(PCF50633_REG_OOCSTAT) ++ & PCF50633_OOCSTAT_ONKEY); ++} ++ ++/* FIXME: shared */ ++int neo1973_aux_key_pressed(void) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ if (gpio->GPFDAT & (1 << 6)) ++ return 0; ++ return 1; ++} ++ ++/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. ++ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 ++ images: 640*480*2*2 = 1228800 < 1245184. */ ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, CFG_ENV_SIZE, 0x200000, 0xa0000, 0x1fce0000, 0 }; ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ ++ ++const char *neo1973_get_charge_status(void) ++{ ++ /* FIXME */ ++ return "unknown"; ++} ++ ++int neo1973_set_charge_mode(enum neo1973_charger_cmd cmd) ++{ ++ /* FIXME */ ++ return 0; ++} +Index: u-boot/board/neo1973/gta02/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/include/configs/neo1973_gta02.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/neo1973_gta02.h +@@ -0,0 +1,276 @@ ++/* ++ * (C) Copyright 2007 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * Configuation settings for the FIC Neo1973 GTA02 Linux GSM phone ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* we want to be able to start u-boot directly from within NAND flash */ ++#define CONFIG_LL_INIT_NAND_ONLY ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++ ++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2410 SoC */ ++#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2410 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA02 has this input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 400*1024) ++ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL3 1 /* we use SERIAL 1 on GTA01 */ ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS (\ ++ CFG_CMD_BDI | \ ++ CFG_CMD_LOADS | \ ++ CFG_CMD_LAODB | \ ++ CFG_CMD_IMI | \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_MEMORY | \ ++ CFG_CMD_ENV | \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_BOOTD | \ ++ CFG_CMD_CONSOLE | \ ++ /* CFG_CMD_BMP | */ \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_RUN | \ ++ CFG_CMD_ECHO | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_IMMAP | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_AUTOSCRIPT | \ ++ CFG_CMD_BSP | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_MISC | \ ++ /* CFG_CMD_USB | */ \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_DIAG | \ ++ /* CFG_CMD_HWFLOW | */ \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_FAT | \ ++ CFG_CMD_EXT2 | \ ++ 0) ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "" ++#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#if defined(CONFIG_ARCH_GTA02_v1) ++#define CFG_PROMPT "GTA02v1 # " /* Monitor Command Prompt */ ++#endif ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 64 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x33000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++#define CFG_BOOTMENU ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (128*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++#if 0 ++#define CONFIG_USB_OHCI 1 ++#endif ++ ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" ++#define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ ++#define CONFIG_USBD_DFU_INTERFACE 2 ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "usbtty=cdc_acm\0" \ ++ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \ ++ "" ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ ++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++/* No NOR flash in this device */ ++#define CFG_NO_FLASH 1 ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_SIZE 0x40000 /* 128k Total Size of Environment Sector */ ++#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ ++#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ ++ ++#define NAND_MAX_CHIPS 1 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE 1 ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++/* EXT2 driver */ ++#define CONFIG_EXT2 1 ++ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 1 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#if 0 ++#define CONFIG_SERIAL_TAG 1 ++#endif ++ ++#define CONFIG_DRIVER_S3C24X0_I2C 1 ++#define CONFIG_HARD_I2C 1 ++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50633 data sheet */ ++#define CFG_I2C_SLAVE 0x7f ++ ++/* we have a board_late_init() function */ ++#define BOARD_LATE_INIT 1 ++ ++#if 0 ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_SPLASH_SCREEN ++#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ ++#define CONFIG_VIDEO_BMP_GZIP ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++#define CONFIG_UNZIP ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++#endif ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++//#define CONFIG_S3C2410_NAND_HWECC 1 ++ ++#define CONFIG_DRIVER_PCF50633 1 ++ ++#define MTDIDS_DEFAULT "nand0=neo1973-nand" ++#define MTPARTS_DEFAULT "neo1973-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),-(jffs2)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "neo1973-nand" ++#define CONFIG_NAND_DYNPART ++ ++#endif /* __CONFIG_H */ +Index: u-boot/board/neo1973/gta02/split_by_variant.sh +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/split_by_variant.sh +@@ -0,0 +1,37 @@ ++#!/bin/sh ++# --------------------------------------------------------- ++# Set the core module defines according to Core Module ++# --------------------------------------------------------- ++# --------------------------------------------------------- ++# Set up the GTA01 type define ++# --------------------------------------------------------- ++ ++CFGINC=${obj}include/config.h ++CFGTMP=${obj}board/neo1973/gta02/config.tmp ++ ++mkdir -p ${obj}include ++if [ "$1" == "" ] ++then ++ echo "$0:: No parameters - using GTA02Bv1 config" ++ echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC ++ echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP ++else ++ case "$1" in ++ gta02v1_config) ++ echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC ++ echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP ++ ;; ++ ++ *) ++ echo "$0:: Unrecognised config - using GTA02v1 config" ++ echo "#define CONFIG_ARCH_GTA02_v1" > $CFGINC ++ echo "CONFIG_USB_DFU_REVISION=0x0310" > $CFGTMP ++ ;; ++ ++ esac ++ ++fi ++# --------------------------------------------------------- ++# Complete the configuration ++# --------------------------------------------------------- ++$MKCONFIG -a neo1973_gta02 arm arm920t gta02 neo1973 s3c24x0 +Index: u-boot/include/pcf50633.h +=================================================================== +--- /dev/null ++++ u-boot/include/pcf50633.h +@@ -0,0 +1,235 @@ ++#ifndef _PCF50633_H ++#define _PCF50633_H ++ ++/* Philips PCF50633 Power Managemnt Unit (PMU) driver ++ * (C) 2006-2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ */ ++ ++enum pfc50633_regs { ++ PCF50633_REG_VERSION = 0x00, ++ PCF50633_REG_VARIANT = 0x01, ++ PCF50633_REG_INT1 = 0x02, /* Interrupt Status */ ++ PCF50633_REG_INT2 = 0x03, /* Interrupt Status */ ++ PCF50633_REG_INT3 = 0x04, /* Interrupt Status */ ++ PCF50633_REG_INT4 = 0x05, /* Interrupt Status */ ++ PCF50633_REG_INT5 = 0x06, /* Interrupt Status */ ++ PCF50633_REG_INT1M = 0x07, /* Interrupt Mask */ ++ PCF50633_REG_INT2M = 0x08, /* Interrupt Mask */ ++ PCF50633_REG_INT3M = 0x09, /* Interrupt Mask */ ++ PCF50633_REG_INT4M = 0x0a, /* Interrupt Mask */ ++ PCF50633_REG_INT5M = 0x0b, /* Interrupt Mask */ ++ PCF50633_REG_OOCSHDWN = 0x0c, ++ PCF50633_REG_OOCWAKE = 0x0d, ++ PCF50633_REG_OOCTIM1 = 0x0e, ++ PCF50633_REG_OOCTIM2 = 0x0f, ++ PCF50633_REG_OOCMODE = 0x10, ++ PCF50633_REG_OOCCTL = 0x11, ++ PCF50633_REG_OOCSTAT = 0x12, ++ PCF50633_REG_GPIOCTL = 0x13, ++ PCF50633_REG_GPIO1CFG = 0x14, ++ PCF50633_REG_GPIO2CFG = 0x15, ++ PCF50633_REG_GPIO3CFG = 0x16, ++ PCF50633_REG_GPOCFG = 0x17, ++ PCF50633_REG_BVMCTL = 0x18, ++ PCF50633_REG_SVMCTL = 0x19, ++ PCF50633_REG_AUTOOUT = 0x1a, ++ PCF50633_REG_AUTOENA = 0x1b, ++ PCF50633_REG_AUTOCTL = 0x1c, ++ PCF50633_REG_AUTOMXC = 0x1d, ++ PCF50633_REG_DOWN1OUT = 0x1e, ++ PCF50633_REG_DOWN1ENA = 0x1f, ++ PCF50633_REG_DOWN1CTL = 0x20, ++ PCF50633_REG_DOWN1MXC = 0x21, ++ PCF50633_REG_DOWN2OUT = 0x22, ++ PCF50633_REG_DOWN2ENA = 0x23, ++ PCF50633_REG_DOWN2CTL = 0x24, ++ PCF50633_REG_DOWN2MXC = 0x25, ++ PCF50633_REG_MEMLDOOUT = 0x26, ++ PCF50633_REG_MEMLDOENA = 0x27, ++ PCF50633_REG_LEDOUT = 0x28, ++ PCF50633_REG_LEDENA = 0x29, ++ PCF50633_REG_LEDCTL = 0x2a, ++ PCF50633_REG_LEDDIM = 0x2b, ++ /* reserved */ ++ PCF50633_REG_LDO1OUT = 0x2d, ++ PCF50633_REG_LDO1ENA = 0x2e, ++ PCF50633_REG_LDO2OUT = 0x2f, ++ PCF50633_REG_LDO2ENA = 0x30, ++ PCF50633_REG_LDO3OUT = 0x31, ++ PCF50633_REG_LDO3ENA = 0x32, ++ PCF50633_REG_LDO4OUT = 0x33, ++ PCF50633_REG_LDO4ENA = 0x34, ++ PCF50633_REG_LDO5OUT = 0x35, ++ PCF50633_REG_LDO5ENA = 0x36, ++ PCF50633_REG_LDO6OUT = 0x37, ++ PCF50633_REG_LDO6ENA = 0x38, ++ PCF50633_REG_HCLDOOUT = 0x39, ++ PCF50633_REG_HCLDOENA = 0x3a, ++ PCF50633_REG_STBYCTL1 = 0x3b, ++ PCF50633_REG_STBYCTL2 = 0x3c, ++ PCF50633_REG_DEBPF1 = 0x3d, ++ PCF50633_REG_DEBPF2 = 0x3e, ++ PCF50633_REG_DEBPF3 = 0x3f, ++ PCF50633_REG_HCLDOOVL = 0x40, ++ PCF50633_REG_DCDCSTAT = 0x41, ++ PCF50633_REG_LDOSTAT = 0x42, ++ PCF50633_REG_MBCC1 = 0x43, ++ PCF50633_REG_MBCC2 = 0x44, ++ PCF50633_REG_MBCC3 = 0x45, ++ PCF50633_REG_MBCC4 = 0x46, ++ PCF50633_REG_MBCC5 = 0x47, ++ PCF50633_REG_MBCC6 = 0x48, ++ PCF50633_REG_MBCC7 = 0x49, ++ PCF50633_REG_MBCC8 = 0x4a, ++ PCF50633_REG_MBCS1 = 0x4b, ++ PCF50633_REG_MBCS2 = 0x4c, ++ PCF50633_REG_MBCS3 = 0x4d, ++ PCF50633_REG_BBCCTL = 0x4e, ++ PCF50633_REG_ALMGAIN = 0x4f, ++ PCF50633_REG_ALMDATA = 0x50, ++ /* reserved */ ++ PCF50633_REG_ADCC3 = 0x52, ++ PCF50633_REG_ADCC2 = 0x53, ++ PCF50633_REG_ADCC1 = 0x54, ++ PCF50633_REG_ADCS1 = 0x55, ++ PCF50633_REG_ADCS2 = 0x56, ++ PCF50633_REG_ADCS3 = 0x57, ++ /* reserved */ ++ PCF50633_REG_RTCSC = 0x59, /* Second */ ++ PCF50633_REG_RTCMN = 0x5a, /* Minute */ ++ PCF50633_REG_RTCHR = 0x5b, /* Hour */ ++ PCF50633_REG_RTCWD = 0x5c, /* Weekday */ ++ PCF50633_REG_RTCDT = 0x5d, /* Day */ ++ PCF50633_REG_RTCMT = 0x5e, /* Month */ ++ PCF50633_REG_RTCYR = 0x5f, /* Year */ ++ PCF50633_REG_RTCSCA = 0x60, /* Alarm Second */ ++ PCF50633_REG_RTCMNA = 0x61, /* Alarm Minute */ ++ PCF50633_REG_RTCHRA = 0x62, /* Alarm Hour */ ++ PCF50633_REG_RTCWDA = 0x63, /* Alarm Weekday */ ++ PCF50633_REG_RTCDTA = 0x64, /* Alarm Day */ ++ PCF50633_REG_RTCMTA = 0x65, /* Alarm Month */ ++ PCF50633_REG_RTCYRA = 0x66, /* Alarm Year */ ++ ++ PCF50633_REG_MEMBYTE0 = 0x67, ++ PCF50633_REG_MEMBYTE1 = 0x68, ++ PCF50633_REG_MEMBYTE2 = 0x69, ++ PCF50633_REG_MEMBYTE3 = 0x6a, ++ PCF50633_REG_MEMBYTE4 = 0x6b, ++ PCF50633_REG_MEMBYTE5 = 0x6c, ++ PCF50633_REG_MEMBYTE6 = 0x6d, ++ PCF50633_REG_MEMBYTE7 = 0x6e, ++ /* reserved */ ++ PCF50633_REG_DCDCPFM = 0x84, ++ __NUM_PCF50633_REGS ++}; ++ ++enum pcf50633_reg_int1 { ++ PCF50633_INT1_ADPINS = 0x01, /* Adapter inserted */ ++ PCF50633_INT1_ADPREM = 0x02, /* Adapter removed */ ++ PCF50633_INT1_USBINS = 0x04, /* USB inserted */ ++ PCF50633_INT1_USBREM = 0x08, /* USB removed */ ++ /* reserved */ ++ PCF50633_INT1_ALARM = 0x40, /* RTC alarm time is reached */ ++ PCF50633_INT1_SECOND = 0x80, /* RTC periodic second interrupt */ ++}; ++ ++enum pcf50633_reg_int2 { ++ PCF50633_INT2_ONKEYR = 0x01, /* ONKEY rising edge */ ++ PCF50633_INT2_ONKEYF = 0x02, /* ONKEY falling edge */ ++ PCF50633_INT2_EXTON1R = 0x04, /* EXTON1 rising edge */ ++ PCF50633_INT2_EXTON1F = 0x08, /* EXTON1 falling edge */ ++ PCF50633_INT2_EXTON2R = 0x10, /* EXTON2 rising edge */ ++ PCF50633_INT2_EXTON2F = 0x20, /* EXTON2 falling edge */ ++ PCF50633_INT2_EXTON3R = 0x40, /* EXTON3 rising edge */ ++ PCF50633_INT2_EXTON3F = 0x80, /* EXTON3 falling edge */ ++}; ++ ++enum pcf50633_reg_int3 { ++ PCF50633_INT3_BATFULL = 0x01, /* Battery full */ ++ PCF50633_INT3_CHGHALT = 0x02, /* Charger halt */ ++ PCF50633_INT3_THLIMON = 0x04, ++ PCF50633_INT3_THLIMOFF = 0x08, ++ PCF50633_INT3_USBLIMON = 0x10, ++ PCF50633_INT3_USBLIMOFF = 0x20, ++ PCF50633_INT3_ADCRDY = 0x40, /* ADC conversion finished */ ++ PCF50633_INT3_ONKEY1S = 0x80, /* ONKEY pressed 1 second */ ++}; ++ ++enum pcf50633_reg_int4 { ++ PCF50633_INT4_LOWSYS = 0x01, ++ PCF50633_INT4_LOWBAT = 0x02, ++ PCF50633_INT4_HIGHTMP = 0x04, ++ PCF50633_INT4_AUTOPWRFAIL = 0x08, ++ PCF50633_INT4_DWN1PWRFAIL = 0x10, ++ PCF50633_INT4_DWN2PWRFAIL = 0x20, ++ PCF50633_INT4_LEDPWRFAIL = 0x40, ++ PCF50633_INT4_LEDOVP = 0x80, ++}; ++ ++enum pcf50633_reg_int5 { ++ PCF50633_INT4_LDO1PWRFAIL = 0x01, ++ PCF50633_INT4_LDO2PWRFAIL = 0x02, ++ PCF50633_INT4_LDO3PWRFAIL = 0x04, ++ PCF50633_INT4_LDO4PWRFAIL = 0x08, ++ PCF50633_INT4_LDO5PWRFAIL = 0x10, ++ PCF50633_INT4_LDO6PWRFAIL = 0x20, ++ PCF50633_INT4_HCLDOPWRFAIL = 0x40, ++ PCF50633_INT4_HCLDOOVL = 0x80, ++}; ++ ++enum pcf50633_reg_oocwake { ++ PCF50633_OOCWAKE_ONKEY = 0x01, ++ PCF50633_OOCWAKE_EXTON1 = 0x02, ++ PCF50633_OOCWAKE_EXTON2 = 0x04, ++ PCF50633_OOCWAKE_EXTON3 = 0x08, ++ PCF50633_OOCWAKE_RTC = 0x10, ++ /* reserved */ ++ PCF50633_OOCWAKE_USB = 0x40, ++ PCF50633_OOCWAKE_ADP = 0x80, ++}; ++ ++enum pcf50633_reg_mbcc1 { ++ PCF50633_MBCC1_CHGENA = 0x01, /* Charger enable */ ++ PCF50633_MBCC1_AUTOSTOP = 0x02, ++ PCF50633_MBCC1_AUTORES = 0x04, /* automatic resume */ ++ PCF50633_MBCC1_RESUME = 0x08, /* explicit resume cmd */ ++ PCF50633_MBCC1_RESTART = 0x10, /* restart charging */ ++ PCF50633_MBCC1_PREWDTIME_60M = 0x20, /* max. precharging time */ ++ PCF50633_MBCC1_WDTIME_1H = 0x00, ++ PCF50633_MBCC1_WDTIME_2H = 0x40, ++ PCF50633_MBCC1_WDTIME_4H = 0x80, ++ PCF50633_MBCC1_WDTIME_6H = 0xc0, ++}; ++#define PCF50633_MBCC1_WDTIME_MASK 0xc0 ++ ++enum pcf50633_reg_mbcc2 { ++ PCF50633_MBCC2_VBATCOND_2V7 = 0x00, ++ PCF50633_MBCC2_VBATCOND_2V85 = 0x01, ++ PCF50633_MBCC2_VBATCOND_3V = 0x02, ++ PCF50633_MBCC2_VBATCOND_3V15 = 0x03, ++ PCF50633_MBCC2_VMAX_4V = 0x00, ++ PCF50633_MBCC2_VMAX_4V20 = 0x28, ++ PCF50633_MBCC2_VRESDEBTIME_64S = 0x80, /* debounce time (32/64sec) */ ++}; ++#define PCF50633_MBCC2_VBATCOND_MASK 0x03 ++#define PCF50633_MBCC2_VMAX_MASK 0x3c ++ ++#define PCF50633_OOCSTAT_ONKEY 0x01 ++ ++/* this is to be provided by the board implementation */ ++extern const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS]; ++ ++void pcf50633_reg_write(u_int8_t reg, u_int8_t val); ++ ++u_int8_t pcf50633_reg_read(u_int8_t reg); ++ ++void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val); ++void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits); ++ ++void pcf50633_init(void); ++void pcf50633_usb_maxcurrent(unsigned int ma); ++ ++#endif /* _PCF50633_H */ ++ +Index: u-boot/drivers/pcf50633.c +=================================================================== +--- /dev/null ++++ u-boot/drivers/pcf50633.c +@@ -0,0 +1,142 @@ ++#include <common.h> ++ ++#ifdef CONFIG_DRIVER_PCF50633 ++ ++#include <i2c.h> ++#include <pcf50633.h> ++#include <asm/atomic.h> ++#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) ++ ++#define PCF50633_I2C_ADDR 0x73 ++ ++void __pcf50633_reg_write(u_int8_t reg, u_int8_t val) ++{ ++ i2c_write(PCF50633_I2C_ADDR, reg, 1, &val, 1); ++} ++ ++u_int8_t __pcf50633_reg_read(u_int8_t reg) ++{ ++ u_int8_t tmp; ++ i2c_read(PCF50633_I2C_ADDR, reg, 1, &tmp, 1); ++ return tmp; ++} ++ ++void pcf50633_reg_write(u_int8_t reg, u_int8_t val) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ __pcf50633_reg_write(reg, val); ++ local_irq_restore(flags); ++} ++ ++u_int8_t pcf50633_reg_read(u_int8_t reg) ++{ ++ unsigned long flags; ++ u_int8_t tmp; ++ ++ local_irq_save(flags); ++ tmp = __pcf50633_reg_read(reg); ++ local_irq_restore(flags); ++ ++ return tmp; ++} ++ ++void pcf50633_reg_set_bit_mask(u_int8_t reg, u_int8_t mask, u_int8_t val) ++{ ++ unsigned long flags; ++ u_int8_t tmp; ++ ++ local_irq_save(flags); ++ tmp = __pcf50633_reg_read(reg); ++ __pcf50633_reg_write(reg, (val & mask) | (tmp & ~mask)); ++ local_irq_restore(flags); ++} ++ ++void pcf50633_reg_clear_bits(u_int8_t reg, u_int8_t bits) ++{ ++ unsigned long flags; ++ u_int8_t tmp; ++ ++ local_irq_save(flags); ++ tmp = pcf50633_reg_read(reg); ++ pcf50633_reg_write(reg, (tmp & ~bits)); ++ local_irq_restore(flags); ++} ++ ++static const u_int8_t regs_invalid[] = { ++ PCF50633_REG_VERSION, ++ PCF50633_REG_VARIANT, ++ PCF50633_REG_OOCSHDWN, ++ PCF50633_REG_INT1, ++ PCF50633_REG_INT2, ++ PCF50633_REG_INT3, ++ PCF50633_REG_INT4, ++ PCF50633_REG_INT5, ++ PCF50633_REG_OOCSTAT, ++ 0x2c, ++ PCF50633_REG_DCDCSTAT, ++ PCF50633_REG_LDOSTAT, ++ PCF50633_REG_MBCS1, ++ PCF50633_REG_MBCS2, ++ PCF50633_REG_MBCS3, ++ PCF50633_REG_ALMDATA, ++ 0x51, ++ /* 0x55 ... 0x6e: don't write */ ++ /* 0x6f ... 0x83: reserved */ ++}; ++#define PCF50633_LAST_REG 0x55 ++ ++static int reg_is_invalid(u_int8_t reg) ++{ ++ int i; ++ ++ /* all registers above 0x55 (ADCS1) except 0x84 */ ++ if (reg == PCF50633_REG_DCDCPFM) ++ return 0; ++ if (reg >= 0x55) ++ return 1; ++ ++ for (i = 0; i < ARRAY_SIZE(regs_invalid); i++) { ++ if (regs_invalid[i] > reg) ++ return 0; ++ if (regs_invalid[i] == reg) ++ return 1; ++ } ++ ++ return 0; ++} ++ ++ ++/* initialize PCF50633 register set */ ++void pcf50633_init(void) ++{ ++ unsigned long flags; ++ u_int8_t i; ++ ++ local_irq_save(flags); ++ for (i = 0; i < PCF50633_LAST_REG; i++) { ++ if (reg_is_invalid(i)) ++ continue; ++ __pcf50633_reg_write(i, pcf50633_initial_regs[i]); ++ } ++ local_irq_restore(flags); ++} ++ ++void pcf50633_usb_maxcurrent(unsigned int ma) ++{ ++ u_int8_t val; ++ ++ if (ma < 100) ++ val = 0x03; ++ else if (ma < 500) ++ val = 0x00; ++ else if (ma < 1000) ++ val = 0x01; ++ else ++ val = 0x02; ++ ++ return pcf50633_reg_set_bit_mask(PCF50633_REG_MBCC7, 0x03, val); ++} ++ ++#endif /* CONFIG DRIVER_PCF50633 */ +Index: u-boot/board/neo1973/common/lowlevel_init.S +=================================================================== +--- u-boot.orig/board/neo1973/common/lowlevel_init.S ++++ u-boot/board/neo1973/common/lowlevel_init.S +@@ -49,7 +49,7 @@ + #define WAIT (0x1<<2) + #define UBLB (0x1<<3) + +-#define B1_BWSCON (DW32) ++#define B1_BWSCON (DW16 + WAIT + UBLB) + #define B2_BWSCON (DW16) + #define B3_BWSCON (DW16 + WAIT + UBLB) + #define B4_BWSCON (DW16) +@@ -68,9 +68,9 @@ + + /* BANK1CON */ + #define B1_Tacs 0x0 /* 0clk */ +-#define B1_Tcos 0x0 /* 0clk */ +-#define B1_Tacc 0x7 /* 14clk */ +-#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tcos 0x1 /* 1clk */ ++#define B1_Tacc 0x4 /* 4clk */ ++#define B1_Tcoh 0x1 /* 1clk */ + #define B1_Tah 0x0 /* 0clk */ + #define B1_Tacp 0x0 + #define B1_PMC 0x0 +@@ -112,7 +112,7 @@ + #if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4) + #define B6_SCAN 0x1 /* 9bit */ + #elif defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ +- defined(CONFIG_ARCH_GTA01B_v4) ++ defined(CONFIG_ARCH_GTA01B_v4) || defined(CONFIG_ARCH_GTA02_v1) + #define B6_SCAN 0x2 /* 10bit */ + #endif + +@@ -165,6 +165,18 @@ + str r1, [r0] + #endif + ++#if defined(CONFIG_ARCH_GTA02_v1) ++ /* enable KEEPACT to make sure PMU keeps us alive */ ++ ldr r0, =0x56000000 /* GPJ base */ ++ ldr r1, [r0, #0xd0] /* GPJCON */ ++ orr r1, r1, #(1 << 6) ++ str r1, [r0, #0xd0] ++ ++ ldr r1, [r0, #0xd4] /* GPJDAT */ ++ orr r1, r1, #(1 << 3) ++ str r1, [r0, #0xd4] ++#endif ++ + /* everything is fine now */ + mov pc, lr + +Index: u-boot/board/neo1973/gta02/pcf50633.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/pcf50633.c +@@ -0,0 +1,91 @@ ++ ++#include <common.h> ++#include <pcf50633.h> ++ ++/* initial register set for PCF50633 in Neo1973 GTA02 devices */ ++const u_int8_t pcf50633_initial_regs[__NUM_PCF50633_REGS] = { ++ /* gap */ ++ [PCF50633_REG_INT1M] = PCF50633_INT1_SECOND, ++ [PCF50633_REG_INT2M] = PCF50633_INT2_EXTON3F | ++ PCF50633_INT2_EXTON3R | ++ PCF50633_INT2_EXTON2F | ++ PCF50633_INT2_EXTON2R | ++ PCF50633_INT2_EXTON1R | ++ PCF50633_INT2_EXTON1F, ++ [PCF50633_REG_INT3M] = PCF50633_INT3_ADCRDY, ++ [PCF50633_REG_INT4M] = 0x00, ++ [PCF50633_REG_INT5M] = 0x00, ++ ++ [PCF50633_REG_OOCWAKE] = 0xd3, /* wake from ONKEY,EXTON!,RTC,USB,ADP */ ++ [PCF50633_REG_OOCTIM1] = 0xaa, /* debounce 14ms everything */ ++ [PCF50633_REG_OOCTIM2] = 0x4a, ++ [PCF50633_REG_OOCMODE] = 0x55, ++ [PCF50633_REG_OOCCTL] = 0x44, ++ ++ [PCF50633_REG_GPIOCTL] = 0x01, /* only GPIO1 is input */ ++ [PCF50633_REG_GPIO2CFG] = 0x00, ++ [PCF50633_REG_GPIO3CFG] = 0x00, ++ [PCF50633_REG_GPOCFG] = 0x00, ++ ++ [PCF50633_REG_SVMCTL] = 0x08, /* 3.10V SYS voltage thresh. */ ++ [PCF50633_REG_BVMCTL] = 0x02, /* 2.80V BAT voltage thresh. */ ++ ++ [PCF50633_REG_STBYCTL1] = 0x00, ++ [PCF50633_REG_STBYCTL2] = 0x00, ++ ++ [PCF50633_REG_DEBPF1] = 0xff, ++ [PCF50633_REG_DEBPF2] = 0xff, ++ [PCF50633_REG_DEBPF2] = 0x3f, ++ ++ [PCF50633_REG_AUTOOUT] = 0x6b, /* 3.300V */ ++ [PCF50633_REG_AUTOENA] = 0x01, /* always on */ ++ [PCF50633_REG_AUTOCTL] = 0x00, /* automatic up/down operation */ ++ [PCF50633_REG_AUTOMXC] = 0x0a, /* 400mA at startup FIXME */ ++ ++ [PCF50633_REG_DOWN1OUT] = 0x1b, /* 1.3V (0x1b * .025V + 0.625V) */ ++ [PCF50633_REG_DOWN1ENA] = 0x02, /* enabled if GPIO1 = HIGH */ ++ [PCF50633_REG_DOWN1CTL] = 0x00, /* no DVM */ ++ [PCF50633_REG_DOWN1MXC] = 0x22, /* limit to 510mA at startup */ ++ ++ [PCF50633_REG_DOWN2OUT] = 0x2f, /* 1.8V (0x2f * .025V + 0.625V) */ ++ [PCF50633_REG_DOWN2ENA] = 0x02, /* enabled if GPIO1 = HIGH */ ++ [PCF50633_REG_DOWN2CTL] = 0x00, /* no DVM */ ++ [PCF50633_REG_DOWN2MXC] = 0x22, /* limit to 510mA at startup */ ++ ++ [PCF50633_REG_MEMLDOOUT] = 0x00, ++ [PCF50633_REG_MEMLDOENA] = 0x00, ++ ++ [PCF50633_REG_LEDOUT] = 0x2f, /* full backlight power */ ++ [PCF50633_REG_LEDENA] = 0x02, /* enabled if GPIO1 = HIGH */ ++ [PCF50633_REG_LEDCTL] = 0x05, /* ovp enabled, ocp 500mA */ ++ [PCF50633_REG_LEDDIM] = 0x20, /* dimming curve */ ++ ++ [PCF50633_REG_LDO1OUT] = 0x04, /* 1.3V (4 * 0.1V + 0.9V) */ ++ [PCF50633_REG_LDO1ENA] = 0x01, /* always on */ ++ ++ [PCF50633_REG_LDO2OUT] = 0x18, /* 3.3V (24 * 0.1V + 0.9V) */ ++ [PCF50633_REG_LDO2ENA] = 0x02, /* enabled if GPIO1 = HIGH */ ++ ++ [PCF50633_REG_LDO3OUT] = 0x15, /* 3.0V (21 * 0.1V + 0.9V) */ ++ [PCF50633_REG_LDO3ENA] = 0x02, /* enabled if GPIO1 = HIGH */ ++ ++ [PCF50633_REG_LDO4ENA] = 0x00, ++ [PCF50633_REG_LDO5ENA] = 0x00, ++ [PCF50633_REG_LDO6ENA] = 0x00, ++ ++ [PCF50633_REG_HCLDOOUT] = 0x18, /* 3.3V (24 * 0.1V + 0.9V) */ ++ [PCF50633_REG_HCLDOENA] = 0x00, /* off by default*/ ++ ++ [PCF50633_REG_DCDCPFM] = 0x00, /* off by default*/ ++ ++ [PCF50633_REG_MBCC1] = 0xe6, ++ [PCF50633_REG_MBCC2] = 0x28, /* Vbatconid=2.7V, Vmax=4.20V */ ++ [PCF50633_REG_MBCC3] = 0x19, /* 25/255 == 98mA pre-charge */ ++ [PCF50633_REG_MBCC4] = 0xff, /* 255/255 == 1A adapter fast */ ++ [PCF50633_REG_MBCC5] = 0x7f, /* 127/255 == 500mA usb fast */ ++ [PCF50633_REG_MBCC6] = 0x00, /* cutoff current 1/32 * Ichg */ ++ [PCF50633_REG_MBCC7] = 0x00, /* 1.6A max bat curr, USB 100mA */ ++ [PCF50633_REG_MBCC8] = 0x00, ++ ++ [PCF50633_REG_BBCCTL] = 0x19, /* 3V, 200uA, on */ ++}; +Index: u-boot/board/neo1973/gta02/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/gta02/config.mk +@@ -0,0 +1,32 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# FIC Neo1973 GTA01 board with S3C2410X (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++# GTA01v3 has 1 bank of 64 MB SDRAM ++# GTA01v4 has 1 bank of 64 MB SDRAM ++# ++# 3000'0000 to 3400'0000 ++# we load ourself to 33F8'0000 ++# ++# GTA01Bv2 or later has 1 bank of 128 MB SDRAM ++# ++# 3000'0000 to 3800'0000 ++# we load ourself to 37F8'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# download area is 3200'0000 or 3300'0000 ++ ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x5119 ++ ++sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ++ ++TEXT_BASE = 0x33F80000 +Index: u-boot/drivers/smedia3362.c +=================================================================== +--- /dev/null ++++ u-boot/drivers/smedia3362.c +@@ -0,0 +1,125 @@ ++/* ++ * (C) Copyright 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++#if defined(CONFIG_VIDEO_GLAMO3362) ++ ++#include <video_fb.h> ++#include "videomodes.h" ++#include <s3c2410.h> ++#include "smedia3362.h" ++ ++/* ++ * Export Graphic Device ++ */ ++GraphicDevice smi; ++ ++ ++struct glamo_script { ++ u_int16_t reg; ++ u_int16_t val; ++} __attribute__((packed)); ++ ++/* from 'initial glamo 3365 script' */ ++static struct glamo_script gl3362_init_script[] = { ++ /* clock */ ++ { GLAMO_REG_CLOCK_MEMORY, 0x300a }, ++ { GLAMO_REG_CLOCK_LCD, 0x10aa }, ++ { GLAMO_REG_CLOCK_MMC, 0x100a }, ++ { GLAMO_REG_CLOCK_ISP, 0x32aa }, ++ { GLAMO_REG_CLOCK_JPEG, 0x100a }, ++ { GLAMO_REG_CLOCK_3D, 0x302a }, ++ { GLAMO_REG_CLOCK_2D, 0x302a }, ++ //{ GLAMO_REG_CLOCK_RISC1, 0x1aaa }, ++ //{ GLAMO_REG_CLOCK_RISC2, 0x002a }, ++ { GLAMO_REG_CLOCK_MPEG, 0x3aaa }, ++ { GLAMO_REG_CLOCK_MPROC, 0x12aa }, ++ { 0xfffe, 5 }, ++ { GLAMO_REG_CLOCK_HOST, 0x000d }, ++ { GLAMO_REG_CLOCK_MEMORY, 0x000a }I, ++ { GLAMO_REG_CLOCK_LCD, 0x00ee }, ++ { GLAMO_REG_CLOCK_MMC, 0x000a }, ++ { GLAMO_REG_CLOCK_ISP, 0x02aa }, ++ { GLAMO_REG_CLOCK_JPEG, 0x000a }, ++ { GLAMO_REG_CLOCK_3D, 0x002a }, ++ { GLAMO_REG_CLOCK_2D, 0x002a }, ++ //{ GLAMO_REG_CLOCK_RISC1, 0x0aaa }, ++ //{ GLAMO_REG_CLOCK_RISC2, 0x002a }, ++ { GLAMO_REG_CLOCK_MPEG, 0x0aaa }, ++ { GLAMO_REG_CLOCK_MPROC, 0x02aa }, ++ { 0xfffe, 5 }, ++ { GLAMO_REG_PLL_GEN1, 0x061a }, /* PLL1=50MHz, OSCI=32kHz */ ++ { GLAMO_REG_PLL_GEN3, 0x09c3 }, /* PLL2=80MHz, OSCI=32kHz */ ++ { 0xfffe, 5 }, ++ { GLAMO_REG_CLOCK_GEN5_1, 0x18ff }, ++ { GLAMO_REG_CLOCK_GEN5_2, 0x051f }, ++ { GLAMO_REG_CLOCK_GEN6, 0x2000 }, ++ { GLAMO_REG_CLOCK_GEN7, 0x0105 }, ++ { GLAMO_REG_CLOCK_GEN8, 0x0100 }, ++ { GLAMO_REG_CLOCK_GEN10, 0x0017 }, ++ { GLAMO_REG_CLOCK_GEN11, 0x0017 }, ++ ++ /* hostbus interface */ ++ { GLAMO_REG_HOSTBUS(1), 0x0e00 }, ++ { GLAMO_REG_HOSTBUS(2), 0x07ff }, ++ { GLAMO_REG_HOSTBUS(4), 0x0080 }, ++ { GLAMO_REG_HOSTBUS(5), 0x0244 }, ++ { GLAMO_REG_HOSTBUS(6), 0x0600 }, ++ { GLAMO_REG_HOSTBUS(12), 0xf00e }, ++ ++ /* memory */ ++ { GLAMO_REG_MEM_TYPE, 0x0874 }, /* VRAM 8Mbyte */ ++ { GLAMO_REG_MEM_GEN, 0xafaf }, ++ { GLAMO_REG_MEM_TIMING(1), 0x0108 }, ++ { GLAMO_REG_MEM_TIMING(2), 0x0010 }, ++ { GLAMO_REG_MEM_TIMING(3), 0x0000 }, ++ { GLAMO_REG_MEM_TIMING(4), 0x0000 }, ++ { GLAMO_REG_MEM_TIMING(5), 0x0000 }, ++ { GLAMO_REG_MEM_TIMING(6), 0x0000 }, ++ { GLAMO_REG_MEM_TIMING(7), 0x0000 }, ++ { GLAMO_REG_MEM_TIMING(8), 0x1002 }, ++ { GLAMO_REG_MEM_TIMING(9), 0x6006 }, ++ { GLAMO_REG_MEM_TIMING(10), 0x00ff }, ++ { GLAMO_REG_MEM_TIMING(11), 0x0001 }, ++ { GLAMO_REG_MEM_POWER1, 0x0020 }, ++ { GLAMO_REG_MEM_POWRE2, 0x0000 }, ++ { GLAMO_REG_MEM_DRAM1, 0x0000 }, ++ { 0xfffe, 1 }, ++ { GLAMO_REG_MEM_DRAM1, 0xc100 }, ++ { GLAMO_REG_MEM_DRAM2, 0x01d6 }, ++}; ++ ++static int glamo3362_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(gl3362_init_script); i++) { ++ struct glamo_reg *reg = gl3362_init_script[i]; ++ ++ if (reg->reg == 0xfffe) ++ delay(reg->val); ++ else ++ gl3362_reg_write(reg->reg, reg->val); ++ } ++ /* FIXME */ ++} ++ ++#endif /* CONFIG_VIDEO_GLAMO3362 */ +Index: u-boot/drivers/Makefile +=================================================================== +--- u-boot.orig/drivers/Makefile ++++ u-boot/drivers/Makefile +@@ -50,7 +50,7 @@ + usbdcore.o usbdfu.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ + videomodes.o w83c553f.o \ + ks8695eth.o \ +- pcf50606.o \ ++ pcf50606.o pcf50633.o \ + pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ + rpx_pcmcia.o \ + fsl_i2c.o s3c2410_fb.o +Index: u-boot/common/cmd_nand.c +=================================================================== +--- u-boot.orig/common/cmd_nand.c ++++ u-boot/common/cmd_nand.c +@@ -208,8 +208,10 @@ + putc('\n'); + for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) { + if (nand_info[i].name) +- printf("Device %d: %s, sector size %lu KiB\n", ++ printf("Device %d: %s, page size %lu, " ++ "sector size %lu KiB\n", + i, nand_info[i].name, ++ nand_info[i].oobblock, + nand_info[i].erasesize >> 10); + } + return 0; +Index: u-boot/drivers/nand/nand_ids.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_ids.c ++++ u-boot/drivers/nand/nand_ids.c +@@ -67,7 +67,7 @@ + + {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, + +- {"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, ++ //{"NAND 512MiB 3,3V 8-bit", 0xDC, 512, 512, 0x4000, 0}, + + /* These are the new chips with large page size. The pagesize + * and the erasesize is determined from the extended id bytes +Index: u-boot/board/neo1973/common/udc.c +=================================================================== +--- u-boot.orig/board/neo1973/common/udc.c ++++ u-boot/board/neo1973/common/udc.c +@@ -3,6 +3,7 @@ + #include <usbdcore.h> + #include <s3c2410.h> + #include <pcf50606.h> ++#include <pcf50633.h> + + void udc_ctrl(enum usbd_event event, int param) + { +@@ -23,6 +24,11 @@ + defined(CONFIG_ARCH_GTA01B_v2) || defined(CONFIG_ARCH_GTA01B_v3) || \ + defined(CONFIG_ARCH_GTA01B_v4) + pcf50606_charge_autofast(param); ++#elif defined(CONFIG_ARCH_GTA02_v1) ++ if (param) ++ pcf50633_usb_maxcurrent(500); ++ else ++ pcf50633_usb_maxcurrent(0); + #endif + break; + default: diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-hxd8.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-hxd8.patch new file mode 100644 index 0000000000..f85fdea836 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-hxd8.patch @@ -0,0 +1,1169 @@ +Patch to add HXD8 support + +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2026,6 +2026,9 @@ + qt2410_config : unconfig + @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0 + ++hxd8_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t hxd8 NULL s3c24x0 ++ + scb9328_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx + +Index: u-boot/board/hxd8/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/Makefile +@@ -0,0 +1,65 @@ ++# ++# (C) Copyright 2000-2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := hxd8.o udc.o pcf50606.o ++SOBJS := lowlevel_init.o ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++all: $(LIB) lowevel_foo.bin ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++lowlevel_foo.o: lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds ++ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +Index: u-boot/board/hxd8/hxd8.c +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/hxd8.c +@@ -0,0 +1,189 @@ ++/* ++ * (C) Copyright 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <video_fb.h> ++#include <nand.h> ++#include <pcf50606.h> ++#include <s3c2440.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define FCLK_SPEED 1 ++ ++#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ ++#define M_MDIV 0xC3 ++#define M_PDIV 0x4 ++#define M_SDIV 0x1 ++#elif FCLK_SPEED==1 ++#if 0 ++#define M_MDIV 0x6e /* Fout = 399.65MHz */ ++#define M_PDIV 0x3 ++#define M_SDIV 0x1 ++#else ++#define M_MDIV 0x61 /* Fout = 296.35MHz due to wrong PLL capacitors */ ++#define M_PDIV 0x1 ++#define M_SDIV 0x2 ++#endif ++#endif ++ ++#define USB_CLOCK 1 ++ ++#if USB_CLOCK==0 ++#define U_M_MDIV 0xA1 ++#define U_M_PDIV 0x3 ++#define U_M_SDIV 0x1 ++#elif USB_CLOCK==1 ++#define U_M_MDIV 0x3c ++#define U_M_PDIV 0x4 ++#define U_M_SDIV 0x2 ++#endif ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++ gpio->GPACON = 0x005E0FFE; ++ gpio->GPADAT = 0x0001C000; ++ gpio->GPBCON = 0x00045542; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPCCON = 0xAAAA02A9; ++ gpio->GPCUP = 0x0000FFFF; ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ gpio->GPFCON = 0x0000AAA9; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPGCON = 0x027D0316; ++ gpio->GPGUP = 0x0000FFFF; ++ gpio->GPHCON = 0x0014AAAA; ++ gpio->GPHUP = 0x000007FF; ++ gpio->GPJCON = 0x00000000; ++ ++ /* USB CHG enable */ ++ gpio->GPGDAT |= ( 1 << 11); ++#if 0 ++ /* USB Device Part */ ++ /*GPGCON is reset for USB Device */ ++ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ ++ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ ++ ++ gpio->GPGDAT |= ( 1 << 12); ++ gpio->GPGDAT &= ~( 1 << 12); ++ udelay(20000); ++ gpio->GPGDAT |= ( 1 << 12); ++#endif ++ ++ /* arch number of SMDK2440-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_HXD8; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++void board_video_init(GraphicDevice *pGD) ++{ ++ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); ++ ++ lcd->LCDCON1 = 0x0000057b; ++ lcd->LCDCON2 = 0x0143c049; ++ lcd->LCDCON3 = 0x0009df01; ++ lcd->LCDCON4 = 0x00000028; ++ lcd->LCDCON5 = 0x00000b08; ++ ++ lcd->TPAL = 0x01202020; ++ ++ //lcd->LCDCON5 |= (0x01 << 3); ++} ++ ++int board_late_init(void) ++{ ++ /* Initialize the Power Management Unit with a safe register set */ ++ pcf50606_init(); ++ ++ return 0; ++} ++ ++int dram_init(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++u_int32_t get_board_rev(void) ++{ ++ return 0x00000110; ++} ++ ++/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. ++ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 ++ images: 640*480*2*2 = 1228800 < 1245184. */ ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3fd00000, 0 }; ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ +Index: u-boot/board/hxd8/lowlevel_init.S +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/lowlevel_init.S +@@ -0,0 +1,171 @@ ++/* ++ * Memory Setup stuff - taken from blob memsetup.S ++ * ++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and ++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) ++ * ++ * Modified for the FIC HXD8 by Harald Welte <laforge@openmoko.org> ++ * (C) Copyright 2007 by OpenMoko, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <config.h> ++#include <version.h> ++ ++ ++/* some parameters for the board */ ++ ++/* ++ * ++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S ++ * ++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> ++ * ++ */ ++ ++#define BWSCON 0x48000000 ++ ++/* BWSCON */ ++#define DW8 (0x0) ++#define DW16 (0x1) ++#define DW32 (0x2) ++#define WAIT (0x1<<2) ++#define UBLB (0x1<<3) ++ ++#define B1_BWSCON (DW32) ++#define B2_BWSCON (DW16) ++#define B3_BWSCON (DW16 + WAIT + UBLB) ++#define B4_BWSCON (DW16) ++#define B5_BWSCON (DW16) ++#define B6_BWSCON (DW32) ++#define B7_BWSCON (DW32) ++ ++/* BANK0CON */ ++#define B0_Tacs 0x0 /* 0clk */ ++#define B0_Tcos 0x0 /* 0clk */ ++#define B0_Tacc 0x7 /* 14clk */ ++#define B0_Tcoh 0x0 /* 0clk */ ++#define B0_Tah 0x0 /* 0clk */ ++#define B0_Tacp 0x0 ++#define B0_PMC 0x0 /* normal */ ++ ++/* BANK1CON */ ++#define B1_Tacs 0x0 /* 0clk */ ++#define B1_Tcos 0x0 /* 0clk */ ++#define B1_Tacc 0x7 /* 14clk */ ++#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tah 0x0 /* 0clk */ ++#define B1_Tacp 0x0 ++#define B1_PMC 0x0 ++ ++#define B2_Tacs 0x0 ++#define B2_Tcos 0x0 ++#define B2_Tacc 0x7 ++#define B2_Tcoh 0x0 ++#define B2_Tah 0x0 ++#define B2_Tacp 0x0 ++#define B2_PMC 0x0 ++ ++#define B3_Tacs 0x0 /* 0clk */ ++#define B3_Tcos 0x3 /* 4clk */ ++#define B3_Tacc 0x7 /* 14clk */ ++#define B3_Tcoh 0x1 /* 1clk */ ++#define B3_Tah 0x0 /* 0clk */ ++#define B3_Tacp 0x3 /* 6clk */ ++#define B3_PMC 0x0 /* normal */ ++ ++#define B4_Tacs 0x0 /* 0clk */ ++#define B4_Tcos 0x0 /* 0clk */ ++#define B4_Tacc 0x7 /* 14clk */ ++#define B4_Tcoh 0x0 /* 0clk */ ++#define B4_Tah 0x0 /* 0clk */ ++#define B4_Tacp 0x0 ++#define B4_PMC 0x0 /* normal */ ++ ++#define B5_Tacs 0x0 /* 0clk */ ++#define B5_Tcos 0x0 /* 0clk */ ++#define B5_Tacc 0x7 /* 14clk */ ++#define B5_Tcoh 0x0 /* 0clk */ ++#define B5_Tah 0x0 /* 0clk */ ++#define B5_Tacp 0x0 ++#define B5_PMC 0x0 /* normal */ ++ ++#define B6_MT 0x3 /* SDRAM */ ++#define B6_Trcd 0x1 /* 3clk */ ++#define B6_SCAN 0x2 /* 10bit */ ++ ++#define B7_MT 0x3 /* SDRAM */ ++#define B7_Trcd 0x1 /* 3clk */ ++#define B7_SCAN 0x1 /* 9bit */ ++ ++/* REFRESH parameter */ ++#define REFEN 0x1 /* Refresh enable */ ++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ ++#define Trp 0x1 /* 3clk */ ++#define Trc 0x3 /* 7clk */ ++#define Tchr 0x2 /* 3clk */ ++#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ ++/**************************************/ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl lowlevel_init ++lowlevel_init: ++ /* memory control configuration */ ++ /* make r0 relative the current location so that it */ ++ /* reads SMRDATA out of FLASH rather than memory ! */ ++ ldr r0, =SMRDATA ++ ldr r1, _TEXT_BASE ++ sub r0, r0, r1 ++ ldr r1, =BWSCON /* Bus Width Status Controller */ ++ add r2, r0, #13*4 ++0: ++ ldr r3, [r0], #4 ++ str r3, [r1], #4 ++ cmp r2, r0 ++ bne 0b ++ ++ /* setup asynchronous bus mode */ ++ mrc p15, 0, r1 ,c1 ,c0, 0 ++ orr r1, r1, #0xc0000000 ++ mcr p15, 0, r1, c1, c0, 0 ++ ++ /* everything is fine now */ ++ mov pc, lr ++ ++ .ltorg ++/* the literal pools origin */ ++ ++SMRDATA: ++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) ++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) ++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) ++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) ++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) ++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) ++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) ++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) ++ .word 0x32 ++ .word 0x30 ++ .word 0x30 +Index: u-boot/include/configs/hxd8.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/hxd8.h +@@ -0,0 +1,277 @@ ++/* ++ * (C) Copyright 2007 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * Configuation settings for the FIC HXD8 ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++/* we want to be able to start u-boot directly from within NAND flash */ ++#define CONFIG_LL_INIT_NAND_ONLY ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++ ++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ ++#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2440 Board */ ++#define CONFIG_HXD8 1 /* on a FIC HXD8 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 16934400/* the HXD8 has this input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) ++ /* >> CFG_VIDEO_LOGO_MAX_SIZE */ ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL3 1 /* we use SERIAL 3 on HXD8 */ ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS (\ ++ CFG_CMD_BDI | \ ++ CFG_CMD_LOADS | \ ++ CFG_CMD_LAODB | \ ++ CFG_CMD_IMI | \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_MEMORY | \ ++ CFG_CMD_ENV | \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_BOOTD | \ ++ CFG_CMD_CONSOLE | \ ++ /* CFG_CMD_BMP | */ \ ++ CFG_CMD_ASKENV | \ ++ CFG_CMD_RUN | \ ++ CFG_CMD_ECHO | \ ++ CFG_CMD_I2C | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_IMMAP | \ ++ CFG_CMD_DATE | \ ++ CFG_CMD_AUTOSCRIPT | \ ++ CFG_CMD_BSP | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_MISC | \ ++ /* CFG_CMD_USB | */ \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_DIAG | \ ++ /* CFG_CMD_HWFLOW | */ \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_FAT | \ ++ CFG_CMD_EXT2 | \ ++ 0) ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "" ++#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 3 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "HXD8 # " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 64 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x33000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (512*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++#if 0 ++#define CONFIG_USB_OHCI 1 ++#endif ++ ++#if 1 ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x511a /* CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" ++#define CONFIG_USBD_PRODUCT_NAME "HXD8 Bootloader " U_BOOT_VERSION ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ ++#define CONFIG_USBD_DFU_INTERFACE 2 ++#endif ++#define CFG_CONSOLE_IS_IN_ENV 1 ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "usbtty=cdc_acm\0" \ ++ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC2,115200 console=tty0 loglevel=8\0" \ ++ "" ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ ++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */ ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++/* No NOR flash in this device */ ++#define CFG_NO_FLASH 1 ++ ++#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_OFFSET_OOB 1 /* Location of ENV stored in block 0 OOB */ ++#define CFG_PREBOOT_OVERRIDE 1 /* allow preboot from memory */ ++ ++#define NAND_MAX_CHIPS 3 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE NAND_MAX_CHIPS ++#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_BASE, CFG_NAND_BASE } ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++/* EXT2 driver */ ++#define CONFIG_EXT2 1 ++ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 1 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#if 0 ++#define CONFIG_SERIAL_TAG 1 ++#endif ++ ++#define CONFIG_DRIVER_S3C24X0_I2C 1 ++#define CONFIG_HARD_I2C 1 ++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */ ++#define CFG_I2C_SLAVE 0x7f ++ ++/* we have a board_late_init() function */ ++#define BOARD_LATE_INIT 1 ++ ++#if 1 ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_SPLASH_SCREEN ++#define CFG_VIDEO_LOGO_MAX_SIZE (640*480+1024+100) /* 100 = slack */ ++#define CONFIG_VIDEO_BMP_GZIP ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++#define CONFIG_UNZIP ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++#endif ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++//#define CONFIG_S3C2410_NAND_HWECC 1 ++ ++#define CONFIG_DRIVER_PCF50606 1 ++ ++#define MTDIDS_DEFAULT "nand0=hxd8-nand" ++#define MTPARTS_DEFAULT "hxd8-nand:256k(u-boot),128k(u-boot_env),2M(kernel),640k(splash),0x3fd00000(jffs2)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "hxd8-nand" ++#define CONFIG_NAND_DYNPART ++ ++#endif /* __CONFIG_H */ +Index: u-boot/board/hxd8/udc.c +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/udc.c +@@ -0,0 +1,30 @@ ++ ++#include <common.h> ++#include <usbdcore.h> ++#include <s3c2440.h> ++ ++#if defined(CONFIG_USB_DEVICE) ++ ++void udc_ctrl(enum usbd_event event, int param) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ switch (event) { ++ case UDC_CTRL_PULLUP_ENABLE: ++ if (param) ++ gpio->GPBDAT |= (1 << 9); /* GPB9 */ ++ else ++ gpio->GPBDAT &= ~(1 << 9); /* GPB9 */ ++ break; ++ case UDC_CTRL_500mA_ENABLE: ++ if (param) ++ gpio->GPADAT |= (1 << 0); /* GPA0 */ ++ else ++ gpio->GPADAT &= ~(1 << 0); /* GPA0 */ ++ break; ++ default: ++ break; ++ } ++} ++ ++#endif /* CONFIG_USB_DEVICE */ +Index: u-boot/board/hxd8/pcf50606.c +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/pcf50606.c +@@ -0,0 +1,67 @@ ++ ++#include <common.h> ++#include <pcf50606.h> ++ ++/* initial register set for PCF50606 in HXD8 devices */ ++const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = { ++ [PCF50606_REG_OOCS] = 0x00, ++ /* gap */ ++ [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND, ++ [PCF50606_REG_INT2M] = PCF50606_INT2_CHGFOK | ++ PCF50606_INT2_CHGERR | ++ PCF50606_INT2_CHGFRDY | ++ PCF50606_INT2_CHGPROT | ++ PCF50606_INT2_CHGWD10S | ++ PCF50606_INT2_CHGWDEXP, ++ [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES, ++ [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK | ++ PCF50606_OOCC1_CHGWAK & ++ PCF50606_OOCC1_EXTONWAK_NO_WAKEUP, ++ [PCF50606_REG_OOCC2] = PCF50606_OOCC2_ONKEYDB_14ms | ++ PCF50606_OOCC2_EXTONDB_14ms, ++ /* gap */ ++ [PCF50606_REG_PSSC] = 0x00, ++ [PCF50606_REG_PWROKM] = 0x00, ++ /* gap */ ++ [PCF50606_REG_DCDC1] = 0xf0, /* CORE_1V3: on */ ++ [PCF50606_REG_DCDC2] = 0x00, ++ [PCF50606_REG_DCDC3] = 0x00, ++ [PCF50606_REG_DCDC4] = 0x30, /* 1.25A */ ++ ++ [PCF50606_REG_DCDEC1] = 0xe8, /* IO1_3V3: off */ ++ [PCF50606_REG_DCDEC2] = 0x00, ++ ++ [PCF50606_REG_DCUDC1] = 0x08, /* RF_3V3: off */ ++ [PCF50606_REG_DCUDC2] = 0x30, /* 1.25A current limit */ ++ ++ [PCF50606_REG_IOREGC] = 0xf8, /* AUDIO_3V3: on */ ++ ++ [PCF50606_REG_D1REGC1] = 0xf8, /* RC_3V3: on */ ++ ++ [PCF50606_REG_D2REGC1] = 0x18, /* GPS_3V3: off */ ++ ++ [PCF50606_REG_D3REGC1] = 0xf8, /* IO2_3V3: off */ ++ ++ [PCF50606_REG_LPREGC1] = 0xf8, /* LCM_3V3: on */ ++ [PCF50606_REG_LPREGC2] = 0x00, ++ ++ [PCF50606_REG_MBCC1] = 0x00, /* charger unused */ ++ [PCF50606_REG_MBCC2] = 0x00, /* unlimited charging */ ++ [PCF50606_REG_MBCC3] = 0x1a, /* 0.2*Ifast, 4.20V */ ++ [PCF50606_REG_BBCC] = 0x1f, /* 400uA */ ++ [PCF50606_REG_ADCC1] = 0x00, ++ [PCF50606_REG_ADCC2] = 0x00, ++ /* gap */ ++ [PCF50606_REG_ACDC1] = 0x00, ++ [PCF50606_REG_BVMC] = PCF50606_BVMC_THRSHLD_3V3, ++ [PCF50606_REG_PWMC1] = 0x1f, /* clock: 512 DC: 15/16*/ ++ [PCF50606_REG_LEDC1] = 0x00, ++ [PCF50606_REG_LEDC2] = 0x00, ++ [PCF50606_REG_GPOC1] = 0x03, /* PWM ACTIVE */ ++ [PCF50606_REG_GPOC2] = 0x07, /* back light pull low */ ++ [PCF50606_REG_GPOC3] = 0x00, ++ [PCF50606_REG_GPOC4] = 0x00, ++ [PCF50606_REG_GPOC5] = 0x00, ++}; ++ ++ +Index: u-boot/board/hxd8/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/config.mk +@@ -0,0 +1,27 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# FIC HXD8 board with S3C2440X (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x511a ++CONFIG_USB_DFU_REVISION=0x0100 ++ ++# ++# HXD81v011 or later has 1 bank of 128 MB SDRAM ++# ++# 3000'0000 to 3800'0000 ++# we load ourself to 37F8'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# download area is 3200'0000 or 3300'0000 ++ ++# FIXME: TEXT_BASE = 0x37F80000 ++TEXT_BASE = 0x33F80000 +Index: u-boot/board/hxd8/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/board/hxd8/lowlevel_foo.S +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/lowlevel_foo.S +@@ -0,0 +1,87 @@ ++ ++_start: ++ b reset ++undefvec: ++ b undefvec ++swivec: ++ b swivec ++pabtvec: ++ b pabtvec ++dabtvec: ++ b dabtvec ++rsvdvec: ++ b rsvdvec ++irqvec: ++ b irqvec ++fiqvec: ++ b fiqvec ++ ++reset: ++ /* ++ * set the cpu to SVC32 mode ++ */ ++ mrs r0,cpsr ++ bic r0,r0,#0x1f ++ orr r0,r0,#0xd3 ++ msr cpsr,r0 ++ ++/* turn off the watchdog */ ++#define pWTCON 0x53000000 ++#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ ++#define INTSUBMSK 0x4A00001C ++#define CLKDIVN 0x4C000014 /* clock divisor register */ ++#define CAMDIVN 0x4C000018 ++ ++ ldr r0, =pWTCON ++ mov r1, #0x0 ++ str r1, [r0] ++ ++ mov r1, #0xffffffff ++ ldr r0, =INTMSK ++ str r1, [r0] ++ ldr r1, =0x7ff ++ ldr r0, =INTSUBMSK ++ str r1, [r0] ++ ++ /* FCLK:HCLK:PCLK = 1:3:6 */ ++ ldr r0, =CAMDIVN ++ mov r1, #0 ++ str r1, [r0] ++ ++ /* FCLK:HCLK:PCLK = 1:3:6 */ ++ ldr r0, =CLKDIVN ++ mov r1, #7 ++ str r1, [r0] ++ ++ bl cpu_init_crit ++ ldr r0,=TEXT_BASE ++ mov pc, r0 ++ ++cpu_init_crit: ++ /* ++ * flush v4 I/D caches ++ */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ ++ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ ++ ++ /* ++ * disable MMU stuff and caches ++ */ ++ mrc p15, 0, r0, c1, c0, 0 ++ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) ++ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) ++ orr r0, r0, #0x00000002 @ set bit 2 (A) Align ++ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache ++ mcr p15, 0, r0, c1, c0, 0 ++ ++ /* ++ * before relocating, we have to setup RAM timing ++ * because memory timing is board-dependend, you will ++ * find a lowlevel_init.S in your board directory. ++ */ ++ mov ip, lr ++ bl lowlevel_init ++ mov lr, ip ++ mov pc, lr ++ +Index: u-boot/board/hxd8/lowlevel_foo.lds +=================================================================== +--- /dev/null ++++ u-boot/board/hxd8/lowlevel_foo.lds +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ lowlevel_foo.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/cpu/arm920t/s3c24x0/nand.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/nand.c ++++ u-boot/cpu/arm920t/s3c24x0/nand.c +@@ -83,6 +83,59 @@ + #define NFDATA __REGb(NF_BASE + oNFDATA) + #define NFSTAT __REGb(NF_BASE + oNFSTAT) + ++#if defined(CONFIG_HXD8) ++static int hxd8_nand_dev_ready(struct mtd_info *mtd) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ u_int32_t val = gpio->GPCDAT; ++ ++ switch (nand_curr_device) { ++ case 0: ++ return (NFSTAT & 0x01); ++ case 1: /* RnB 3 */ ++ return ((val>>6) & 0x01); ++ case 2: /* RnB 4 */ ++ return ((val>>7) & 0x01); ++ case 3: /* RnB 2 */ ++ return ((val>>5) & 0x01); ++ default: ++ return 0; ++ } ++} ++ ++/* 4G Nand flash chip select function */ ++static void hxd8_nand_select_chip(struct nand_chip *this, int chip) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ if (chip == 0) ++ gpio->GPGDAT &= ~(1 << 1); ++ else ++ gpio->GPGDAT |= (1 << 1); ++ ++ if (chip == 1) ++ gpio->GPADAT &= ~(1 << 15); ++ else ++ gpio->GPADAT |= (1 << 15); ++ ++ if (chip == 2) ++ gpio->GPADAT &= ~(1 << 16); ++ else ++ gpio->GPADAT |= (1 << 16); ++ ++ if (chip == 3) ++ gpio->GPADAT &= ~(1 << 14); ++ else ++ gpio->GPADAT |= (1 << 14); ++ ++ /* UGLY: ew don't have mtd_info pointer, but know that ++ * s3c24xx hwcontrol function does not use it for CLRNCE */ ++ if (chip == -1) ++ this->hwcontrol(NULL, NAND_CTL_CLRNCE); ++ else ++ this->hwcontrol(NULL, NAND_CTL_SETNCE); ++} ++#endif + + static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) + { +@@ -251,6 +304,11 @@ + nand->eccmode = NAND_ECC_SOFT; + #endif + ++#if defined(CONFIG_HXD8) ++ nand->dev_ready = hxd8_nand_dev_ready; ++ nand->select_chip = hxd8_nand_select_chip; ++#endif ++ + #ifdef CONFIG_S3C2410_NAND_BBT + nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT; + #else diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-license.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-license.patch new file mode 100644 index 0000000000..227a97e71a --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-license.patch @@ -0,0 +1,712 @@ +Index: u-boot/common/Makefile +=================================================================== +--- u-boot.orig/common/Makefile ++++ u-boot/common/Makefile +@@ -34,7 +34,7 @@ + cmd_dynenv.o cmd_eeprom.o cmd_elf.o cmd_ext2.o \ + cmd_fat.o cmd_fdc.o cmd_fdt.o cmd_fdos.o cmd_flash.o cmd_fpga.o \ + cmd_i2c.o cmd_ide.o cmd_immap.o cmd_itest.o cmd_jffs2.o \ +- cmd_load.o cmd_log.o \ ++ cmd_license.o cmd_load.o cmd_log.o \ + cmd_mem.o cmd_mii.o cmd_misc.o cmd_mmc.o \ + cmd_nand.o cmd_net.o cmd_nvedit.o \ + cmd_pci.o cmd_pcmcia.o cmd_portio.o \ +Index: u-boot/common/cmd_license.c +=================================================================== +--- /dev/null ++++ u-boot/common/cmd_license.c +@@ -0,0 +1,57 @@ ++/* ++ * (C) Copyright 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++#if (CONFIG_COMMANDS & CFG_CMD_LICENSE) ++ ++#define LICENSE_MAX 20480 ++#include <command.h> ++#include <malloc.h> ++#include <license.h> ++int gunzip(void *, int, unsigned char *, unsigned long *); ++ ++int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ++{ ++ char *tok, *dst = malloc(LICENSE_MAX); ++ unsigned long len = LICENSE_MAX; ++ ++ if (!dst) ++ return -1; ++ ++ if (gunzip(dst, LICENSE_MAX, gpl_gz, &len) != 0) { ++ printf("Error uncompressing license text\n"); ++ free(dst); ++ return -1; ++ } ++ puts(dst); ++ free(dst); ++ ++ return 0; ++} ++ ++U_BOOT_CMD(license, 1, 1, do_license, ++ "license - print GPL license text\n", ++ NULL); ++ ++#endif /* CFG_CMD_LICENSE */ +Index: u-boot/include/cmd_confdefs.h +=================================================================== +--- u-boot.orig/include/cmd_confdefs.h ++++ u-boot/include/cmd_confdefs.h +@@ -75,6 +75,7 @@ + #define CFG_CMD_FPGA 0x0000010000000000ULL /* FPGA configuration Support */ + #define CFG_CMD_HWFLOW 0x0000020000000000ULL /* RTS/CTS hw flow control */ + #define CFG_CMD_SAVES 0x0000040000000000ULL /* save S record dump */ ++#define CFG_CMD_LICENSE 0x0000080000000000ULL /* Display GPL License */ + #define CFG_CMD_SPI 0x0000100000000000ULL /* SPI utility */ + #define CFG_CMD_FDOS 0x0000200000000000ULL /* Floppy DOS support */ + #define CFG_CMD_VFD 0x0000400000000000ULL /* VFD support (TRAB) */ +Index: u-boot/include/license.h +=================================================================== +--- /dev/null ++++ u-boot/include/license.h +@@ -0,0 +1,584 @@ ++/* bin2header converting 'gpl.gz' */ ++unsigned char gpl_gz[] = { ++ 0x1f, 0x8b, 0x08, 0x08, 0xb2, 0x10, 0x0d, 0x46, 0x00, 0x03, ++ 0x67, 0x70, 0x6c, 0x00, 0x9d, 0x5b, 0x5d, 0x77, 0xdb, 0x46, ++ 0x92, 0x7d, 0x4e, 0xff, 0x8a, 0x3e, 0x7e, 0x89, 0x74, 0x0e, ++ 0xc3, 0xc4, 0x9e, 0x9d, 0xdd, 0x49, 0xfc, 0x44, 0x49, 0x94, ++ 0xcd, 0x1d, 0x99, 0x52, 0x48, 0xca, 0x8e, 0x1f, 0x41, 0xb2, ++ 0x29, 0x62, 0x0c, 0x02, 0x5c, 0x7c, 0x48, 0xe6, 0xbf, 0xdf, ++ 0x7b, 0xab, 0xba, 0x81, 0x06, 0x49, 0x25, 0xb3, 0x9b, 0x93, ++ 0xc4, 0x16, 0x09, 0x54, 0xd7, 0x77, 0xdd, 0xaa, 0x2e, 0xfd, ++ 0xf0, 0x83, 0xc5, 0x3f, 0x1f, 0xa6, 0x8f, 0xf6, 0xc3, 0x78, ++ 0x3a, 0x9e, 0x8d, 0xee, 0xec, 0xc3, 0xe3, 0xd5, 0xdd, 0xe4, ++ 0xda, 0xe2, 0xbf, 0xf1, 0x74, 0x3e, 0x36, 0x3f, 0xc8, 0x03, ++ 0xf8, 0xe7, 0xb3, 0x2b, 0xab, 0xb4, 0xc8, 0xed, 0xbb, 0x81, ++ 0xfd, 0xef, 0x26, 0x77, 0xf6, 0xed, 0xaf, 0xbf, 0xbe, 0x35, ++ 0xc6, 0x5e, 0x17, 0xfb, 0x43, 0x99, 0x3e, 0x6d, 0x6b, 0x7b, ++ 0x71, 0x7d, 0x89, 0x0f, 0xff, 0xf1, 0xeb, 0x40, 0xbe, 0xb2, ++ 0xb7, 0xa5, 0x73, 0x76, 0x5e, 0x6c, 0xea, 0x97, 0xa4, 0x74, ++ 0xf6, 0xb6, 0x68, 0xf2, 0x75, 0x52, 0x83, 0xc0, 0xc0, 0x4e, ++ 0xf2, 0xd5, 0x70, 0x60, 0xec, 0xdf, 0xf9, 0x4c, 0x92, 0x7f, ++ 0xcb, 0xd2, 0xdc, 0xce, 0x6b, 0x3c, 0x5d, 0x0f, 0xec, 0x6d, ++ 0xba, 0xa9, 0xb7, 0xf6, 0x36, 0x2b, 0x8a, 0x72, 0x60, 0xaf, ++ 0x8a, 0xaa, 0xe6, 0xf3, 0x9f, 0x46, 0xf6, 0x97, 0x77, 0x6f, ++ 0xdf, 0xfe, 0xf2, 0xd3, 0xdb, 0xbf, 0xfd, 0xf2, 0xd6, 0x3e, ++ 0xce, 0x47, 0xc6, 0x8e, 0x9f, 0x5d, 0x79, 0x28, 0xc0, 0x45, ++ 0x5a, 0xd9, 0xbd, 0x2b, 0x77, 0x69, 0x5d, 0xbb, 0xb5, 0xad, ++ 0x0b, 0xbb, 0x02, 0x3b, 0x36, 0xc9, 0xd7, 0x76, 0x9d, 0x56, ++ 0x75, 0x99, 0x2e, 0x9b, 0xda, 0x59, 0x3c, 0xbb, 0xc4, 0xd1, ++ 0x3b, 0x7e, 0x99, 0xba, 0xca, 0xd8, 0x62, 0x63, 0xeb, 0x2d, ++ 0xde, 0xcc, 0xd2, 0x95, 0xcb, 0x2b, 0x67, 0xd7, 0xc5, 0xaa, ++ 0xd9, 0xb9, 0x1c, 0xe7, 0xe3, 0x79, 0xbb, 0xda, 0x26, 0xf9, ++ 0x53, 0x9a, 0x3f, 0xd9, 0xb4, 0x26, 0xf9, 0xbc, 0xa8, 0x6d, ++ 0x92, 0x65, 0xc5, 0x8b, 0x5b, 0x0f, 0x0d, 0xd4, 0x21, 0xfa, ++ 0x78, 0x28, 0x5d, 0xb2, 0x5b, 0x66, 0x0e, 0x0a, 0xb0, 0x8b, ++ 0xad, 0x0b, 0x94, 0x2a, 0xbb, 0x29, 0x4a, 0xbb, 0x03, 0xdf, ++ 0xb6, 0x0a, 0x92, 0xf3, 0xbf, 0xb5, 0xab, 0xd2, 0xa7, 0x5c, ++ 0x39, 0xac, 0x93, 0x6f, 0xf8, 0xf0, 0x25, 0x39, 0xd8, 0x43, ++ 0xd1, 0x94, 0x66, 0x03, 0xc1, 0xd7, 0xc5, 0x8e, 0xdf, 0x54, ++ 0x5b, 0x79, 0x1e, 0xcc, 0x0b, 0x0b, 0x10, 0xae, 0x1e, 0x5a, ++ 0x7b, 0x75, 0x00, 0xdf, 0x79, 0x5d, 0x26, 0x15, 0xf8, 0xab, ++ 0x71, 0x96, 0x18, 0xcb, 0xe5, 0xae, 0x4c, 0x32, 0xfb, 0xd0, ++ 0x2c, 0x71, 0xb4, 0xb9, 0xf3, 0x82, 0x80, 0xdd, 0x34, 0xaf, ++ 0x5d, 0xbe, 0xd6, 0xa3, 0x9e, 0x9a, 0x04, 0x0a, 0xae, 0x61, ++ 0x07, 0x1e, 0x65, 0xff, 0xec, 0x28, 0x7e, 0x67, 0x02, 0xcf, ++ 0x3f, 0xfd, 0x84, 0x47, 0x76, 0xe4, 0xb3, 0x6a, 0xf0, 0x18, ++ 0x0f, 0x6d, 0xc5, 0xc1, 0x11, 0x7c, 0x56, 0x04, 0x85, 0x5a, ++ 0xc0, 0x63, 0x65, 0x9b, 0x0a, 0xbe, 0x31, 0xa4, 0x26, 0xd2, ++ 0xca, 0xf4, 0x59, 0xb3, 0x81, 0xb5, 0x64, 0xbf, 0xcf, 0xa0, ++ 0x7c, 0x1e, 0x2e, 0xfa, 0x11, 0x1b, 0xb8, 0xbe, 0x97, 0x98, ++ 0xce, 0x4b, 0x7e, 0xac, 0x22, 0x0d, 0xe6, 0x22, 0x4d, 0x92, ++ 0x1f, 0x6c, 0x81, 0x77, 0x4a, 0xbb, 0x2f, 0x8b, 0xa7, 0x32, ++ 0xd9, 0xd9, 0x97, 0x6d, 0x41, 0xca, 0x4d, 0xbd, 0x2d, 0xca, ++ 0x0a, 0x5a, 0xda, 0xc1, 0x0f, 0xf0, 0xa4, 0x69, 0x2a, 0x35, ++ 0x1f, 0x58, 0xba, 0x98, 0x17, 0x3b, 0xe7, 0x5f, 0x7b, 0xcd, ++ 0x23, 0x7b, 0xc2, 0xad, 0x0a, 0xb8, 0x0b, 0xd4, 0xb7, 0x3c, ++ 0x98, 0xa0, 0xec, 0x3b, 0x57, 0x41, 0x40, 0xfb, 0x8a, 0x60, ++ 0x69, 0x5e, 0xd5, 0x2e, 0x59, 0x0f, 0x2f, 0xad, 0xfd, 0x5a, ++ 0x34, 0x76, 0x95, 0xe4, 0x22, 0xeb, 0xc1, 0x2a, 0x2f, 0xa2, ++ 0x79, 0xcf, 0x70, 0x05, 0x03, 0x16, 0xc5, 0x90, 0x4e, 0xf3, ++ 0x65, 0xeb, 0x72, 0xfb, 0x02, 0xbd, 0xee, 0x5d, 0xf2, 0x8d, ++ 0xca, 0x10, 0xa5, 0x06, 0x46, 0x06, 0xfc, 0x8a, 0x0c, 0x95, ++ 0x6e, 0xe3, 0xca, 0x92, 0xd2, 0x40, 0x01, 0xde, 0x7e, 0x03, ++ 0xba, 0xa4, 0xd9, 0x97, 0x38, 0x1f, 0x02, 0xde, 0x37, 0xaf, ++ 0x71, 0x56, 0x9d, 0xb8, 0x5e, 0x6c, 0xd2, 0xa4, 0xa6, 0x53, ++ 0x98, 0x6d, 0xf2, 0xac, 0x06, 0x8e, 0x9c, 0x23, 0x0a, 0x1d, ++ 0x8d, 0x98, 0x13, 0xfe, 0xec, 0x85, 0x77, 0x9d, 0xf2, 0x49, ++ 0x3c, 0xc1, 0x48, 0x38, 0x41, 0x49, 0xcf, 0x38, 0xda, 0xa6, ++ 0x1b, 0x92, 0xb6, 0x2f, 0x69, 0xb5, 0xbd, 0x1c, 0xb4, 0x47, ++ 0x41, 0x96, 0x95, 0x4b, 0x9f, 0x49, 0xa4, 0x29, 0x57, 0x24, ++ 0xbd, 0x86, 0x61, 0x4a, 0x51, 0xd8, 0x93, 0x43, 0xa8, 0xd5, ++ 0x26, 0xbc, 0x08, 0x9f, 0xc5, 0x8f, 0xd1, 0xab, 0x7c, 0xc6, ++ 0x3b, 0x6a, 0xcf, 0x19, 0xf1, 0x3a, 0x7c, 0xcf, 0x82, 0xc7, ++ 0x95, 0x72, 0x49, 0x22, 0xb9, 0xcd, 0xdd, 0x8b, 0xf2, 0x1b, ++ 0xf4, 0xfe, 0x5e, 0x7d, 0x28, 0x90, 0xfb, 0x96, 0x17, 0x2f, ++ 0x2d, 0xdd, 0x75, 0x41, 0x9a, 0x15, 0x29, 0x43, 0xcf, 0x95, ++ 0x58, 0x67, 0x51, 0xf0, 0xd5, 0xda, 0xad, 0x6a, 0x8d, 0x1c, ++ 0x49, 0x70, 0x95, 0x58, 0x25, 0x77, 0x91, 0x2e, 0x4b, 0x47, ++ 0x4d, 0xad, 0xe8, 0x44, 0x95, 0x92, 0x87, 0x32, 0x96, 0xe9, ++ 0xda, 0xc0, 0x57, 0x99, 0x9d, 0xa8, 0x4c, 0x97, 0x4b, 0xa4, ++ 0xfb, 0x43, 0x94, 0x12, 0x19, 0xa7, 0x47, 0x57, 0xdf, 0xf4, ++ 0xab, 0x82, 0x56, 0x29, 0x19, 0xb7, 0xa5, 0x08, 0xa8, 0x4f, ++ 0x0d, 0xcd, 0x42, 0xdf, 0xe9, 0x9d, 0x82, 0x88, 0xae, 0xb2, ++ 0xa4, 0x16, 0xe2, 0x2b, 0x57, 0xd6, 0x09, 0x04, 0xc6, 0x13, ++ 0x7b, 0x7c, 0x99, 0x2e, 0xd3, 0x2c, 0xad, 0x53, 0x9f, 0x86, ++ 0x48, 0x59, 0x35, 0x6a, 0xce, 0x5a, 0x34, 0xd6, 0xe4, 0x80, ++ 0x1c, 0x79, 0xf5, 0xef, 0x8a, 0x75, 0xba, 0xa1, 0xfb, 0x8a, ++ 0x2a, 0x6e, 0xf1, 0x85, 0xfb, 0x9e, 0xec, 0xf6, 0x19, 0x1e, ++ 0xf2, 0x4f, 0x9c, 0x25, 0x57, 0x35, 0xab, 0xad, 0x4d, 0x82, ++ 0xca, 0xa1, 0xab, 0xad, 0x63, 0xd4, 0x19, 0xfc, 0x54, 0xa7, ++ 0x22, 0xb1, 0xa4, 0x0c, 0xbb, 0x71, 0x20, 0x24, 0xe7, 0x34, ++ 0x48, 0x03, 0x4f, 0xa9, 0xf7, 0x3f, 0x78, 0x47, 0x0a, 0x52, ++ 0x39, 0x94, 0xc3, 0xb4, 0xd2, 0x69, 0x41, 0xf4, 0xca, 0x30, ++ 0xb2, 0xf4, 0xd5, 0xa1, 0x46, 0x99, 0xbc, 0x7b, 0xe4, 0xce, ++ 0x78, 0xe5, 0x20, 0x01, 0x36, 0x68, 0x5d, 0x2d, 0x72, 0x2f, ++ 0x7c, 0x6b, 0x22, 0xcf, 0x03, 0x9d, 0x11, 0x5c, 0xa2, 0xe5, ++ 0xa3, 0xda, 0xc2, 0x25, 0xf0, 0xcc, 0x2e, 0x38, 0x03, 0x8a, ++ 0x0a, 0x53, 0x90, 0x50, 0x55, 0x87, 0xc1, 0xdf, 0xd2, 0xd2, ++ 0x04, 0xd3, 0x30, 0x86, 0xdd, 0x39, 0x2f, 0x81, 0xdf, 0xa3, ++ 0x84, 0xd5, 0x2f, 0xb0, 0x69, 0xed, 0xf6, 0xd5, 0x6f, 0xf6, ++ 0xe2, 0xed, 0xa5, 0x94, 0x25, 0xad, 0x92, 0x7d, 0xad, 0xc3, ++ 0x2d, 0xcd, 0xc5, 0xbb, 0x4b, 0xe8, 0x0f, 0x71, 0xee, 0xdd, ++ 0x24, 0x2a, 0x4c, 0x2f, 0xdb, 0x14, 0x4a, 0xa5, 0x8e, 0x2a, ++ 0xf9, 0x32, 0x73, 0x4f, 0x08, 0x73, 0x29, 0x78, 0x95, 0x14, ++ 0x63, 0x5f, 0xf1, 0x06, 0xb1, 0x85, 0x41, 0xf3, 0x67, 0xa9, ++ 0x42, 0x62, 0xc6, 0xf8, 0x3c, 0xe1, 0x7a, 0x94, 0x55, 0xd0, ++ 0x10, 0x6d, 0xe1, 0x12, 0x5a, 0x4c, 0xb2, 0x27, 0xd2, 0xad, ++ 0x17, 0x85, 0x54, 0x19, 0x2c, 0x10, 0x48, 0x1d, 0x5e, 0xa2, ++ 0x31, 0x38, 0xbc, 0x77, 0x38, 0x23, 0x0a, 0x77, 0xa1, 0x08, ++ 0x37, 0x74, 0xdc, 0xaa, 0xc6, 0x6b, 0x55, 0x6b, 0x0a, 0xcd, ++ 0xa6, 0x79, 0x81, 0xf7, 0x4b, 0x16, 0xa1, 0x83, 0x1c, 0x29, ++ 0xd2, 0xf5, 0x6a, 0x0d, 0x0c, 0x31, 0xd9, 0x9c, 0x94, 0x18, ++ 0x61, 0x3e, 0x95, 0x34, 0x8c, 0xcf, 0x77, 0x8e, 0xa7, 0xb8, ++ 0xac, 0xd2, 0x5a, 0xb0, 0x4f, 0x90, 0x8f, 0xc1, 0x61, 0x4e, ++ 0xfe, 0x8c, 0xcf, 0x16, 0x55, 0xec, 0x41, 0x60, 0xd7, 0x9b, ++ 0x0c, 0xcc, 0xbc, 0x04, 0xe7, 0x10, 0x07, 0x0a, 0x25, 0x9d, ++ 0x27, 0x16, 0x30, 0x49, 0x9a, 0x27, 0xd9, 0x00, 0x67, 0xa8, ++ 0x48, 0xac, 0x31, 0x50, 0x04, 0x2a, 0xfb, 0x4e, 0x4a, 0x69, ++ 0x59, 0xac, 0x9b, 0x95, 0xb2, 0x21, 0x35, 0x84, 0xd6, 0x85, ++ 0x77, 0x92, 0x00, 0x52, 0x73, 0x46, 0xd3, 0xd3, 0x0a, 0x11, ++ 0x2d, 0xe3, 0xcb, 0xd1, 0x8f, 0x78, 0x60, 0xdf, 0xd4, 0x52, ++ 0x60, 0xd4, 0x5d, 0x6e, 0xf9, 0x75, 0x76, 0x18, 0xc8, 0x21, ++ 0x71, 0x7a, 0x22, 0x4b, 0xf5, 0x16, 0x88, 0x02, 0x95, 0x1b, ++ 0x67, 0xa1, 0xda, 0x53, 0x97, 0x35, 0x4a, 0x88, 0x48, 0xef, ++ 0x6b, 0xe3, 0x9e, 0x5f, 0xd7, 0x2c, 0xb3, 0xf0, 0x3b, 0xe6, ++ 0x56, 0xc9, 0x20, 0xcf, 0x45, 0xba, 0x96, 0xf3, 0xd7, 0xcc, ++ 0x8e, 0xa5, 0x4a, 0x8c, 0xfa, 0x15, 0xdc, 0x81, 0x85, 0x11, ++ 0xc1, 0x99, 0xa8, 0xd2, 0xdb, 0xc2, 0x49, 0x21, 0xd2, 0x7c, ++ 0x9d, 0x3e, 0xa7, 0xeb, 0x86, 0x4c, 0xd9, 0x62, 0x29, 0x89, ++ 0x44, 0x0f, 0x69, 0xe1, 0x0c, 0x22, 0x3e, 0xb7, 0x0e, 0xbe, ++ 0xb9, 0x92, 0x68, 0x93, 0x3a, 0xb4, 0xed, 0xc8, 0xe0, 0x4f, ++ 0x94, 0x21, 0x57, 0x27, 0xe5, 0x61, 0xe8, 0x93, 0x26, 0x7c, ++ 0x82, 0xee, 0x02, 0x33, 0x8b, 0xf3, 0x88, 0xc6, 0x77, 0xc9, ++ 0x9a, 0x58, 0xc6, 0xae, 0x32, 0x97, 0x78, 0x0e, 0xa1, 0x02, ++ 0x2f, 0x90, 0x86, 0xdf, 0xb2, 0x85, 0x50, 0x6b, 0x75, 0x4d, ++ 0xef, 0x5a, 0x3f, 0x7a, 0xb4, 0xc1, 0x2c, 0x8f, 0x8f, 0xa9, ++ 0xf7, 0xf6, 0xb9, 0x44, 0x70, 0xd9, 0x30, 0x40, 0xb0, 0x3d, ++ 0xed, 0xdf, 0x46, 0xae, 0xd4, 0xa7, 0x02, 0x12, 0x6a, 0xd6, ++ 0x24, 0x4d, 0x06, 0x0a, 0x24, 0x18, 0x74, 0xe9, 0xcb, 0xfb, ++ 0xba, 0x51, 0x6f, 0x5b, 0x29, 0x18, 0xd8, 0x14, 0x04, 0x7b, ++ 0x02, 0xf5, 0xfe, 0x02, 0x1a, 0xe3, 0xdb, 0xc5, 0x78, 0xf6, ++ 0x69, 0x6e, 0x47, 0xd3, 0x1b, 0x7b, 0x7d, 0x3f, 0xbd, 0x99, ++ 0x2c, 0x26, 0xf7, 0xd3, 0xb9, 0xbd, 0xbd, 0x9f, 0xe1, 0xc7, ++ 0x87, 0xaf, 0x93, 0xe9, 0x87, 0x81, 0xbd, 0x99, 0xcc, 0x17, ++ 0xb3, 0xc9, 0xd5, 0x23, 0xbf, 0x92, 0x07, 0x3f, 0xdd, 0xdf, ++ 0x4c, 0x6e, 0x27, 0xd7, 0x23, 0x7e, 0x40, 0xde, 0x7f, 0x19, ++ 0x0a, 0x6e, 0x3a, 0x07, 0x94, 0xbc, 0x37, 0x8a, 0xae, 0x21, ++ 0x80, 0xa2, 0x98, 0x97, 0xa2, 0xfc, 0xe6, 0x13, 0x03, 0x71, ++ 0x21, 0xac, 0x56, 0x99, 0x84, 0x9a, 0x61, 0xe9, 0xdd, 0x67, ++ 0x89, 0x77, 0x57, 0xfa, 0x44, 0x97, 0x75, 0xb6, 0x45, 0xc6, ++ 0xda, 0x52, 0x25, 0x07, 0x0f, 0x6c, 0x77, 0xc0, 0x9f, 0x50, ++ 0x7a, 0x97, 0x36, 0xd6, 0xa6, 0x69, 0xcb, 0x8f, 0xaa, 0x30, ++ 0xa0, 0xe4, 0xf3, 0xe8, 0x62, 0xa8, 0x5a, 0x7f, 0xf3, 0xa0, ++ 0xfc, 0xbd, 0x01, 0x76, 0x76, 0xd0, 0xdb, 0xc0, 0x08, 0x64, ++ 0x69, 0xd9, 0x97, 0xaa, 0x10, 0xc9, 0x40, 0xee, 0x25, 0xed, ++ 0xc1, 0x25, 0xdf, 0x88, 0x28, 0xcb, 0x44, 0x83, 0x59, 0x4e, ++ 0x0e, 0xd4, 0xcc, 0xce, 0xa1, 0xcc, 0x59, 0x97, 0x8a, 0xc8, ++ 0xd1, 0x37, 0xa4, 0x41, 0xba, 0x60, 0x35, 0x7d, 0x86, 0xc1, ++ 0xe0, 0x5e, 0x42, 0x45, 0x99, 0xef, 0x04, 0xce, 0x92, 0x97, ++ 0xdf, 0x34, 0xa4, 0x53, 0xe1, 0x05, 0x92, 0xe3, 0x58, 0x7d, ++ 0xd6, 0xab, 0xcd, 0x7b, 0x73, 0x8f, 0xb2, 0xdd, 0x17, 0xa5, ++ 0x78, 0x81, 0x60, 0x89, 0x81, 0xf1, 0x0c, 0xb4, 0x1d, 0x04, ++ 0x25, 0x60, 0x7a, 0x8f, 0x3d, 0xa6, 0x0a, 0x19, 0xb7, 0x2d, ++ 0xcd, 0x6b, 0xa6, 0x0e, 0xca, 0x2f, 0x16, 0x33, 0x19, 0x42, ++ 0xb3, 0x49, 0x9e, 0xa8, 0xb2, 0x8b, 0x8f, 0x48, 0x8c, 0xc8, ++ 0x03, 0x1b, 0xa8, 0x78, 0xd0, 0xbe, 0xc0, 0x03, 0x05, 0xba, ++ 0xaf, 0xb2, 0x86, 0xd0, 0x9d, 0x47, 0x14, 0x0d, 0x5d, 0x1d, ++ 0x80, 0xd6, 0x7f, 0x9d, 0x9b, 0x60, 0x19, 0xfb, 0x26, 0x3e, ++ 0xfd, 0x0d, 0x81, 0xe7, 0x98, 0x99, 0xdc, 0x07, 0x86, 0x64, ++ 0xb8, 0x64, 0xbd, 0x2e, 0x9d, 0x64, 0xc9, 0xa4, 0xb2, 0x6f, ++ 0x50, 0x3a, 0xde, 0xc0, 0xa1, 0x47, 0xc8, 0xee, 0xcf, 0x8a, ++ 0x0f, 0x0a, 0xaf, 0x57, 0xe2, 0xaa, 0xd7, 0xc2, 0xa2, 0x27, ++ 0xa4, 0x60, 0x49, 0xe2, 0xce, 0x0e, 0x1f, 0xab, 0x77, 0x78, ++ 0x77, 0x78, 0xaf, 0x19, 0x56, 0x40, 0x59, 0x53, 0x57, 0xa9, ++ 0x44, 0x3c, 0x0a, 0x28, 0xa8, 0x07, 0x57, 0x49, 0x98, 0x2c, ++ 0x37, 0xa6, 0x6c, 0xf2, 0x13, 0xd5, 0xfb, 0x9c, 0x1c, 0x80, ++ 0x8e, 0x5b, 0x0f, 0x3c, 0x60, 0x13, 0x6a, 0x48, 0xa3, 0xc8, ++ 0x02, 0xc5, 0x2e, 0x7e, 0xc5, 0x44, 0x50, 0xbd, 0xc8, 0x89, ++ 0xb6, 0x37, 0x72, 0x20, 0x6d, 0x2b, 0x25, 0x40, 0xb2, 0x68, ++ 0x5a, 0x4b, 0x41, 0xb4, 0x27, 0x8e, 0x66, 0xc2, 0xc9, 0x17, ++ 0xc8, 0x82, 0x6e, 0x4f, 0xe4, 0x95, 0x4b, 0x4f, 0x82, 0x84, ++ 0x45, 0xe6, 0x96, 0x0e, 0xf0, 0x5c, 0xf2, 0x16, 0xe4, 0x3c, ++ 0xc3, 0xf1, 0xe5, 0xd0, 0x7c, 0x51, 0x7c, 0x63, 0x5b, 0x27, ++ 0x2b, 0x1b, 0xa2, 0x6d, 0xd2, 0xaa, 0x78, 0x4a, 0x28, 0x3b, ++ 0xad, 0x90, 0xeb, 0xc2, 0x69, 0x21, 0x78, 0x3b, 0x54, 0x0c, ++ 0x93, 0x1c, 0xfe, 0x9d, 0x76, 0x35, 0x40, 0x35, 0x4f, 0xe6, ++ 0xc7, 0x2a, 0x86, 0x31, 0x34, 0x6f, 0x8c, 0xad, 0x89, 0x9a, ++ 0xd3, 0x5c, 0x22, 0x64, 0x87, 0x22, 0xd0, 0x00, 0x87, 0x21, ++ 0xf8, 0x90, 0xe5, 0x5d, 0x07, 0x7f, 0x0d, 0x55, 0xb3, 0x4f, ++ 0x57, 0x4d, 0xd1, 0x54, 0x99, 0x9e, 0x8e, 0x9c, 0x23, 0xa9, ++ 0x1c, 0xbe, 0x8b, 0x4f, 0xf6, 0x0c, 0x74, 0xd4, 0x17, 0x08, ++ 0x21, 0x10, 0xc1, 0x33, 0x19, 0x3f, 0x65, 0xba, 0x48, 0xf3, ++ 0x99, 0xc7, 0x0b, 0xb1, 0xca, 0x92, 0x74, 0x07, 0xad, 0x80, ++ 0xe9, 0x50, 0xf8, 0xdf, 0xdb, 0x6f, 0xce, 0xed, 0x19, 0x12, ++ 0xf4, 0x00, 0x0f, 0xee, 0x8c, 0xbe, 0x56, 0x85, 0x82, 0x45, ++ 0xf8, 0xc3, 0xe6, 0xb8, 0x97, 0x09, 0xb5, 0xef, 0xa3, 0xf0, ++ 0xc9, 0xb2, 0x72, 0x39, 0x4e, 0x61, 0x29, 0x83, 0x6c, 0x2d, ++ 0x69, 0xc3, 0x67, 0x04, 0x43, 0x76, 0xdd, 0x61, 0x84, 0x03, ++ 0xfa, 0xaa, 0x83, 0x23, 0x88, 0x28, 0x21, 0xb1, 0xf9, 0x73, ++ 0x4c, 0x92, 0x15, 0xb0, 0xae, 0xc2, 0xb6, 0xee, 0x69, 0x98, ++ 0xaa, 0xb5, 0x92, 0x36, 0x3a, 0x82, 0x5d, 0x3d, 0x8c, 0x41, ++ 0xaa, 0xdd, 0x1e, 0x2a, 0x04, 0x47, 0xe6, 0xfd, 0x5a, 0x83, ++ 0x39, 0x74, 0x6b, 0x7a, 0x92, 0xe2, 0xbb, 0x83, 0xa7, 0x92, ++ 0x78, 0x98, 0x58, 0xec, 0x7d, 0x86, 0xa1, 0xcc, 0x2d, 0x3a, ++ 0x8a, 0xe0, 0x17, 0x6b, 0xee, 0xf7, 0xd0, 0x97, 0x07, 0xcc, ++ 0x2c, 0x9e, 0xf3, 0xae, 0xf3, 0x1c, 0x0f, 0xef, 0x84, 0xa2, ++ 0x4a, 0x55, 0x9e, 0x77, 0x98, 0x90, 0x31, 0x7d, 0x66, 0x33, ++ 0x9a, 0xd9, 0xf0, 0x44, 0x23, 0x65, 0x71, 0xa7, 0xec, 0xbe, ++ 0x9a, 0x8a, 0x07, 0xbe, 0x94, 0xaa, 0x9f, 0xc6, 0x38, 0x53, ++ 0x52, 0x7b, 0x3f, 0x11, 0xfa, 0x04, 0x6f, 0xcf, 0x94, 0x92, ++ 0xb9, 0x17, 0xee, 0xad, 0x49, 0x96, 0x88, 0xdb, 0x33, 0x7e, ++ 0x09, 0xd7, 0x00, 0xde, 0xde, 0x39, 0xa7, 0x4e, 0xa2, 0x52, ++ 0x54, 0x2e, 0x2a, 0xe3, 0xbf, 0x51, 0x07, 0xd6, 0x26, 0x97, ++ 0x5d, 0x0f, 0xb0, 0x4a, 0x9a, 0x4a, 0x1b, 0x88, 0x16, 0x32, ++ 0x6e, 0xd2, 0x4c, 0xcb, 0xe7, 0x0a, 0xba, 0x15, 0xc5, 0x42, ++ 0x46, 0x86, 0xb7, 0x77, 0x39, 0xa1, 0x51, 0x31, 0xaf, 0x4a, ++ 0x4c, 0x87, 0x16, 0x53, 0xf4, 0xad, 0x39, 0x47, 0x29, 0x84, ++ 0x0c, 0xb4, 0x66, 0xb3, 0xe5, 0x1d, 0x4f, 0x9f, 0x1a, 0x2a, ++ 0x1f, 0xcb, 0x13, 0x3e, 0xc4, 0x37, 0xa9, 0x80, 0x96, 0x6c, ++ 0xa4, 0x2f, 0x28, 0xc7, 0x47, 0x96, 0xef, 0x6c, 0x91, 0xd3, ++ 0x49, 0xe6, 0x05, 0xc5, 0x59, 0xbe, 0x15, 0xfc, 0x55, 0xd6, ++ 0x6d, 0x59, 0x97, 0xcf, 0x2a, 0x2d, 0x75, 0x94, 0xeb, 0x28, ++ 0x05, 0x7a, 0xc3, 0x0a, 0x0d, 0x79, 0x4f, 0x50, 0x77, 0xb1, ++ 0x61, 0x0f, 0xd4, 0x03, 0x54, 0xc8, 0x11, 0x89, 0x3f, 0x25, ++ 0xa1, 0x16, 0x82, 0x3f, 0xb3, 0x44, 0x49, 0x34, 0xa6, 0xe5, ++ 0xba, 0xa5, 0x42, 0x07, 0x7a, 0x0d, 0x09, 0x84, 0xd2, 0xaf, ++ 0xe2, 0xaf, 0x2e, 0x03, 0x72, 0x6f, 0x55, 0x1f, 0x0a, 0x7d, ++ 0x0e, 0xbf, 0x12, 0x58, 0x09, 0x50, 0xbb, 0xd6, 0xc9, 0x8c, ++ 0x34, 0x07, 0x1c, 0x4e, 0x95, 0x09, 0xcb, 0x10, 0xf2, 0x8c, ++ 0x17, 0x1e, 0x89, 0x16, 0x09, 0x36, 0x6a, 0x09, 0x55, 0x95, ++ 0xf4, 0x51, 0xf9, 0x12, 0x96, 0x2a, 0x59, 0x52, 0x43, 0x16, ++ 0x66, 0x44, 0xd0, 0xf5, 0xe4, 0xf5, 0x88, 0xa0, 0x60, 0xc4, ++ 0x34, 0xf7, 0x0c, 0x71, 0xc2, 0x54, 0xae, 0x51, 0x69, 0x4b, ++ 0x66, 0x0b, 0xe9, 0x0b, 0xc1, 0x5d, 0xca, 0x24, 0x5f, 0xd2, ++ 0x28, 0x00, 0x4a, 0x74, 0x68, 0xf5, 0xa7, 0x3c, 0x2f, 0x1a, ++ 0x64, 0x17, 0x8e, 0x00, 0x7d, 0x11, 0x96, 0xa0, 0xe8, 0x65, ++ 0x3c, 0x7b, 0x36, 0xe3, 0x25, 0x42, 0xc0, 0x7f, 0xf0, 0x7a, ++ 0xeb, 0x73, 0x41, 0x48, 0x8b, 0xf6, 0x65, 0x10, 0x10, 0x58, ++ 0xeb, 0x1f, 0x3e, 0x0a, 0x94, 0x8f, 0xf6, 0x85, 0xcb, 0x6e, ++ 0x5e, 0x21, 0xb3, 0x35, 0x89, 0xf8, 0x08, 0xd5, 0xab, 0xc7, ++ 0x07, 0x6d, 0x8b, 0xb9, 0x84, 0xc2, 0x71, 0xc0, 0xf8, 0x32, ++ 0xea, 0xb2, 0x2c, 0xd4, 0x2f, 0x92, 0xb3, 0xd2, 0xeb, 0x16, ++ 0xf6, 0x39, 0x75, 0x2f, 0x47, 0x39, 0x51, 0xa8, 0x74, 0x08, ++ 0xef, 0x62, 0xfc, 0x7d, 0xe5, 0x24, 0x5d, 0xfd, 0xc6, 0x02, ++ 0xdb, 0x2b, 0xd9, 0x75, 0xe5, 0xb2, 0x4d, 0x98, 0x38, 0x06, ++ 0x1b, 0x80, 0x37, 0x21, 0xc1, 0x5a, 0x27, 0x25, 0xbd, 0xf5, ++ 0x04, 0x55, 0xbe, 0x0e, 0x09, 0xf2, 0x9e, 0xca, 0x07, 0x9a, ++ 0xc4, 0x7a, 0x19, 0x28, 0x48, 0x73, 0x8a, 0x10, 0xfe, 0xa7, ++ 0x49, 0x4b, 0x9d, 0xc0, 0x28, 0xc5, 0x23, 0x62, 0xc3, 0x4b, ++ 0xd3, 0x4e, 0x4d, 0xe4, 0xd1, 0x9d, 0x8e, 0x14, 0x64, 0x22, ++ 0xe7, 0x8b, 0x49, 0xeb, 0xae, 0x72, 0x64, 0x17, 0x1d, 0xd2, ++ 0x8a, 0x9a, 0x94, 0x50, 0x00, 0xdf, 0x27, 0x68, 0x02, 0x6d, ++ 0xe5, 0xfc, 0xd8, 0x45, 0xf4, 0xc3, 0x66, 0x52, 0x5e, 0x51, ++ 0x2c, 0xf4, 0x6a, 0x64, 0x0e, 0xa4, 0x2c, 0x71, 0xf2, 0xb0, ++ 0x24, 0x1f, 0x49, 0x55, 0xe4, 0xa0, 0x26, 0x73, 0x5c, 0x22, ++ 0xa3, 0x52, 0x00, 0x62, 0x07, 0x3b, 0xf8, 0x70, 0xe5, 0x10, ++ 0x7c, 0x74, 0x33, 0x1e, 0x50, 0x79, 0xb8, 0xb7, 0x83, 0x8a, ++ 0x9f, 0xd9, 0x85, 0xd5, 0x0c, 0x84, 0x38, 0x04, 0xd5, 0xb0, ++ 0x04, 0x3c, 0x12, 0xa1, 0x03, 0x4e, 0xb1, 0x64, 0x50, 0xdd, ++ 0xc9, 0x59, 0xa0, 0xb2, 0xb5, 0xec, 0x4b, 0x24, 0x1d, 0xe5, ++ 0x23, 0x99, 0x76, 0x24, 0xd5, 0xd1, 0xd1, 0x9c, 0x38, 0x37, ++ 0x75, 0xfb, 0x82, 0x39, 0xf2, 0xb9, 0x2a, 0xd9, 0x45, 0x5a, ++ 0xc1, 0xdb, 0x92, 0x79, 0xa4, 0xc3, 0xd4, 0x0c, 0xa3, 0x9d, ++ 0x49, 0x5a, 0xf5, 0x6a, 0x8a, 0x39, 0xae, 0x29, 0x92, 0x57, ++ 0x63, 0xbc, 0xe9, 0x6b, 0x96, 0xd2, 0x08, 0x2d, 0xa1, 0x7f, ++ 0x2b, 0x24, 0x21, 0xd3, 0xd7, 0x80, 0x4e, 0x7f, 0xbb, 0x61, ++ 0x88, 0x76, 0x79, 0x8a, 0x01, 0x02, 0x16, 0x46, 0x0b, 0xf1, ++ 0x9d, 0xf3, 0x70, 0x6f, 0x7a, 0x43, 0xd3, 0x96, 0xfe, 0x98, ++ 0x80, 0x31, 0x1b, 0x29, 0x16, 0x3a, 0x0c, 0xc1, 0x07, 0xd2, ++ 0x7a, 0xaa, 0x58, 0xa5, 0x7b, 0x4a, 0xca, 0x35, 0x6a, 0x81, ++ 0xd8, 0x1f, 0x2f, 0xd9, 0x17, 0x56, 0x69, 0x1d, 0x8d, 0x2d, ++ 0xf0, 0xe2, 0x20, 0xba, 0x23, 0x20, 0xa7, 0x32, 0x7c, 0xaf, ++ 0xdb, 0x7c, 0xe9, 0xf5, 0x24, 0xb5, 0x88, 0xb8, 0x28, 0x9a, ++ 0xfe, 0x09, 0x4e, 0xad, 0x6a, 0x13, 0x0f, 0x8e, 0xf0, 0x98, ++ 0x36, 0x77, 0x25, 0xaf, 0x33, 0x00, 0x02, 0x84, 0x59, 0x1d, ++ 0x03, 0xe0, 0xb9, 0xf7, 0x16, 0x56, 0xda, 0x4a, 0xdf, 0xd0, ++ 0x1d, 0x25, 0xdd, 0x8d, 0x71, 0xdf, 0x5d, 0xa9, 0xcd, 0x6f, ++ 0x18, 0x9b, 0xe9, 0x64, 0x88, 0x03, 0x8c, 0xec, 0xac, 0xb2, ++ 0xa3, 0xfe, 0xa9, 0x28, 0x81, 0xe6, 0x32, 0xce, 0x32, 0x42, ++ 0x37, 0x55, 0x9d, 0x45, 0x02, 0x90, 0x79, 0x92, 0xb3, 0xb3, ++ 0x48, 0xf5, 0x1a, 0x67, 0xc7, 0x44, 0x97, 0x3c, 0x3d, 0x51, ++ 0x4b, 0x81, 0xac, 0x6f, 0x79, 0x54, 0x0e, 0x6a, 0xe5, 0x1c, ++ 0x21, 0x73, 0x0c, 0xb5, 0x24, 0x3f, 0xca, 0x87, 0x7f, 0x02, ++ 0x44, 0x2e, 0xf9, 0x73, 0x62, 0x9f, 0x8b, 0xac, 0xe1, 0x44, ++ 0x7f, 0x83, 0xa6, 0xb7, 0xaa, 0x8b, 0x12, 0x7d, 0x95, 0x4f, ++ 0xe9, 0x9d, 0x7c, 0x0a, 0x7d, 0xbb, 0x24, 0xb4, 0x2c, 0x43, ++ 0xfa, 0x8b, 0xb8, 0xd3, 0xac, 0x29, 0x3e, 0xcd, 0x26, 0xe5, ++ 0x6c, 0x91, 0xfb, 0xdb, 0x9f, 0x23, 0xf5, 0x63, 0x11, 0x8e, ++ 0xb9, 0x67, 0x07, 0xa9, 0xb5, 0x34, 0xa0, 0x9f, 0x77, 0x97, ++ 0x2c, 0x51, 0xc5, 0xf2, 0x5f, 0x9c, 0xa8, 0x84, 0x09, 0x38, ++ 0xac, 0xb7, 0x6a, 0x6a, 0xc9, 0x37, 0x04, 0x64, 0x67, 0xca, ++ 0xaf, 0x99, 0x87, 0x88, 0x7b, 0x2b, 0x3c, 0xbc, 0xb3, 0x02, ++ 0xa2, 0x5e, 0xc3, 0x50, 0x48, 0x06, 0x1c, 0x98, 0xf9, 0x98, ++ 0xd2, 0x81, 0x06, 0x34, 0xd0, 0xc1, 0xa7, 0xd1, 0x0a, 0x25, ++ 0x79, 0x4f, 0xb4, 0x02, 0xff, 0x6d, 0xad, 0xc1, 0xcf, 0x32, ++ 0x27, 0xa5, 0xae, 0xd4, 0x89, 0xb2, 0xd4, 0xc1, 0x1d, 0x22, ++ 0x03, 0x00, 0xea, 0x27, 0xd6, 0x72, 0x32, 0xa9, 0xf8, 0xa9, ++ 0xeb, 0x41, 0x06, 0x3e, 0xe6, 0x43, 0xd4, 0x46, 0x33, 0x85, ++ 0x3f, 0x01, 0x82, 0x5a, 0x6a, 0xfa, 0xe2, 0x88, 0x81, 0xbd, ++ 0xf1, 0x56, 0xa0, 0x56, 0xec, 0x92, 0x32, 0x85, 0xff, 0x37, ++ 0x61, 0x2c, 0xd4, 0x8d, 0x08, 0x59, 0x73, 0x14, 0x8c, 0xbd, ++ 0x87, 0x0a, 0x07, 0x2d, 0x20, 0x3b, 0x95, 0x2c, 0x69, 0xe3, ++ 0x49, 0x10, 0xf7, 0xc0, 0x3e, 0x27, 0x59, 0xaa, 0xe4, 0xa0, ++ 0xb3, 0x0c, 0xd9, 0xb9, 0x96, 0xe9, 0x9b, 0xca, 0x75, 0x70, ++ 0x49, 0x29, 0xd7, 0x34, 0x5d, 0x57, 0x21, 0xf8, 0x48, 0x12, ++ 0xc2, 0x61, 0xe0, 0xf1, 0xb8, 0x07, 0x50, 0x39, 0xef, 0xb2, ++ 0x74, 0xfc, 0x9c, 0xeb, 0x6d, 0x9e, 0xe0, 0x22, 0x7f, 0xbd, ++ 0x15, 0x1a, 0x04, 0x16, 0x3f, 0x57, 0x06, 0xa8, 0xed, 0x15, ++ 0x17, 0xfb, 0xeb, 0x40, 0x8a, 0xb0, 0xea, 0x5e, 0x28, 0x1c, ++ 0x6b, 0x3c, 0x2a, 0xd1, 0xc7, 0xc6, 0xe9, 0xd9, 0x41, 0x70, ++ 0x9f, 0xd6, 0xdf, 0x7f, 0xcf, 0x06, 0xaf, 0xeb, 0x5f, 0x25, ++ 0xf9, 0x7f, 0xd8, 0x60, 0xf5, 0x9a, 0x77, 0xa5, 0x39, 0x55, ++ 0xa0, 0x99, 0x22, 0x6a, 0x59, 0x05, 0x9e, 0xfa, 0xc2, 0x2c, ++ 0x06, 0xd2, 0xd2, 0x7f, 0x74, 0x0b, 0xf5, 0x8a, 0xc8, 0x84, ++ 0x28, 0x32, 0x3c, 0x4b, 0x32, 0xf0, 0x92, 0x6b, 0x3e, 0xf3, ++ 0x28, 0xc6, 0xdf, 0xd9, 0xea, 0x74, 0x60, 0x23, 0xc3, 0xc3, ++ 0x9c, 0x40, 0x94, 0x99, 0x12, 0x5d, 0xdb, 0xc9, 0xb4, 0x23, ++ 0x4c, 0x11, 0x58, 0xf4, 0xf8, 0x7e, 0xcb, 0x5f, 0x0c, 0xb5, ++ 0xfe, 0x3a, 0x78, 0x45, 0xde, 0x16, 0x9f, 0x26, 0xad, 0xd7, ++ 0xb1, 0x2b, 0x87, 0x5e, 0x4a, 0x9d, 0xee, 0xd8, 0x79, 0xb3, ++ 0x0c, 0xd5, 0x61, 0xa9, 0xda, 0xf7, 0xc8, 0xa5, 0x77, 0x3d, ++ 0xb6, 0xe9, 0x92, 0x8a, 0x0e, 0xc4, 0x94, 0x17, 0xb9, 0x14, ++ 0x54, 0x73, 0xec, 0xda, 0xca, 0xc9, 0x87, 0x78, 0x15, 0xe7, ++ 0xe7, 0xb4, 0xfd, 0xc6, 0x0c, 0xfa, 0x94, 0xeb, 0xd0, 0x5b, ++ 0xe9, 0x19, 0x62, 0xa6, 0x75, 0x20, 0xd7, 0x86, 0xbe, 0x9e, ++ 0x6e, 0xe4, 0x74, 0x3d, 0x32, 0xdc, 0xc6, 0x9c, 0xf0, 0x85, ++ 0xcf, 0x71, 0x48, 0xc3, 0x56, 0x29, 0xed, 0x9a, 0x16, 0x34, ++ 0x76, 0x59, 0x53, 0x49, 0x63, 0x92, 0x54, 0x55, 0xb1, 0x4a, ++ 0xc3, 0x3c, 0x0c, 0x21, 0x90, 0xd0, 0xf1, 0xdd, 0x26, 0xcd, ++ 0x53, 0x9d, 0xb4, 0xb2, 0xcd, 0xf2, 0xcf, 0x6b, 0x1e, 0x2e, ++ 0xd3, 0xbd, 0x5e, 0x27, 0xb3, 0x60, 0x9b, 0x50, 0xbf, 0xc8, ++ 0x5c, 0xea, 0xc7, 0x64, 0x02, 0x7b, 0x38, 0x1f, 0xcf, 0xb2, ++ 0x24, 0x06, 0x0e, 0x9d, 0x44, 0x90, 0xf2, 0x23, 0x0c, 0xff, ++ 0x4c, 0xa5, 0x13, 0xdb, 0x99, 0x6a, 0xef, 0xc4, 0xe2, 0x2e, ++ 0x60, 0xd9, 0xc1, 0x89, 0x3c, 0x71, 0xb8, 0xc8, 0x05, 0x1f, ++ 0xab, 0x86, 0x1f, 0xc7, 0xf1, 0x2e, 0x4f, 0xae, 0x06, 0xdb, ++ 0x49, 0x4f, 0x8b, 0x69, 0xe3, 0xd7, 0x2e, 0xd8, 0xb5, 0xeb, ++ 0xb4, 0xd0, 0x53, 0x86, 0x8e, 0x96, 0xd2, 0x80, 0x18, 0xda, ++ 0xe9, 0xb2, 0x8b, 0x84, 0x5d, 0xf2, 0x2f, 0x41, 0x00, 0x3b, ++ 0x78, 0xb4, 0xa0, 0xd3, 0x0b, 0x95, 0x90, 0x1c, 0x7f, 0x83, ++ 0x1b, 0xbb, 0x4c, 0xa1, 0x49, 0xc5, 0x34, 0x7e, 0xe9, 0x25, ++ 0x34, 0xa8, 0x51, 0xa5, 0xf6, 0xac, 0xd5, 0xa1, 0xaa, 0x01, ++ 0xdd, 0x64, 0xc6, 0xc4, 0xc4, 0xdb, 0x97, 0x9f, 0x8d, 0x12, ++ 0xb4, 0xda, 0xe4, 0x82, 0x5b, 0x84, 0xe7, 0xf6, 0x28, 0xe3, ++ 0x51, 0x7b, 0xe2, 0x23, 0x54, 0xe6, 0xcc, 0x7d, 0xed, 0xa1, ++ 0xc8, 0x6f, 0x4e, 0xd0, 0x42, 0x44, 0x9d, 0x10, 0x2b, 0x8a, ++ 0x00, 0xde, 0xd5, 0xf8, 0x31, 0x99, 0x38, 0x3a, 0xf8, 0x33, ++ 0xa0, 0x2e, 0x47, 0xfb, 0x6d, 0x0c, 0x41, 0xc7, 0x89, 0xbf, ++ 0x88, 0x16, 0x6f, 0x90, 0x29, 0xb5, 0x47, 0xb5, 0xe1, 0x2d, ++ 0x4b, 0xb8, 0x8e, 0xd4, 0x4c, 0x2e, 0x8f, 0x08, 0x9c, 0x78, ++ 0x5f, 0x80, 0xdb, 0x02, 0x46, 0x85, 0x18, 0xbe, 0x68, 0x04, ++ 0xe7, 0x57, 0xe6, 0x1c, 0xac, 0xec, 0x65, 0x49, 0x5e, 0x51, ++ 0x10, 0x1f, 0x37, 0x4f, 0xdb, 0x28, 0xb7, 0xa7, 0xfe, 0xbe, ++ 0x5c, 0x67, 0x9c, 0xbb, 0x3d, 0x7a, 0xa6, 0x68, 0xa3, 0x24, ++ 0x22, 0x72, 0x34, 0x2d, 0x8a, 0x94, 0x21, 0x90, 0xe1, 0x3f, ++ 0x3a, 0xc8, 0x40, 0x27, 0xd2, 0x31, 0x90, 0x0e, 0x6b, 0xd0, ++ 0xfd, 0xc9, 0x08, 0x5d, 0xe1, 0x6b, 0x0c, 0x5a, 0x7a, 0x50, ++ 0xc2, 0xa8, 0xa3, 0xd2, 0x79, 0xdd, 0xf7, 0x3d, 0xc7, 0xb8, ++ 0xd2, 0x3e, 0xf9, 0x4a, 0x1f, 0xb2, 0x79, 0x84, 0x54, 0x78, ++ 0x95, 0xc9, 0xf1, 0x12, 0x9c, 0x62, 0x5f, 0x1b, 0x81, 0x38, ++ 0x2f, 0x02, 0x06, 0x8b, 0x57, 0x8f, 0x7f, 0xfd, 0x74, 0xa6, ++ 0x4f, 0x5e, 0x2a, 0xa9, 0x0b, 0xca, 0x45, 0x51, 0xd2, 0xb0, ++ 0x0a, 0xd4, 0xbe, 0x96, 0xb1, 0x88, 0xa4, 0xb4, 0x63, 0xef, ++ 0xd2, 0xf3, 0x0c, 0x5b, 0xa6, 0x0d, 0xc3, 0xa0, 0x5f, 0x22, ++ 0x68, 0xb9, 0x11, 0x6a, 0x73, 0xab, 0x4e, 0xac, 0x44, 0x19, ++ 0xe1, 0x8e, 0x5d, 0xac, 0xcb, 0x02, 0x11, 0x00, 0x5a, 0x34, ++ 0x11, 0x6c, 0x2f, 0xdf, 0xc2, 0xda, 0x42, 0x5a, 0x76, 0xab, ++ 0x37, 0x2d, 0x63, 0x12, 0x39, 0x62, 0x25, 0x76, 0x37, 0x4c, ++ 0xc5, 0x81, 0x01, 0xb4, 0x83, 0xbc, 0xe5, 0xc2, 0xbf, 0x9b, ++ 0x26, 0xd3, 0xc4, 0x92, 0xa5, 0x09, 0x5a, 0x47, 0x31, 0xdd, ++ 0xdf, 0xd5, 0x74, 0xa1, 0xbb, 0x8b, 0x7b, 0x4d, 0x7a, 0xe4, ++ 0xbe, 0x3e, 0x6a, 0xc1, 0xaa, 0x94, 0x23, 0xc9, 0x70, 0x33, ++ 0x2d, 0x9e, 0xe3, 0x77, 0x2d, 0x24, 0xd7, 0xb6, 0xe2, 0x13, ++ 0x13, 0x8b, 0x87, 0xf3, 0x02, 0xf3, 0x89, 0x0d, 0xbe, 0x0e, ++ 0x6d, 0xfb, 0xf7, 0xb8, 0x7e, 0xa0, 0x87, 0x0c, 0xfe, 0x8a, ++ 0x61, 0x38, 0x0d, 0xaa, 0xab, 0xe3, 0x9b, 0x0f, 0xdd, 0xbb, ++ 0x61, 0xc3, 0x9b, 0x84, 0xa6, 0xac, 0x94, 0x1b, 0xba, 0x6d, ++ 0xba, 0x4c, 0x6b, 0x1d, 0xd4, 0x67, 0xc9, 0x4b, 0x7b, 0x75, ++ 0xef, 0xfb, 0xc4, 0x53, 0x79, 0x94, 0x0e, 0x6a, 0x4b, 0xc1, ++ 0x8b, 0xe9, 0xe5, 0x41, 0x6f, 0xc5, 0x64, 0x5a, 0xd1, 0xc3, ++ 0xd7, 0x47, 0xa3, 0xfb, 0x0b, 0x3f, 0x5e, 0x7c, 0x75, 0xc4, ++ 0x7e, 0xa9, 0xa3, 0x1d, 0xde, 0x36, 0xae, 0x5a, 0xaf, 0xd1, ++ 0xf3, 0x13, 0x3f, 0xd2, 0xed, 0xd9, 0xb8, 0x16, 0xfc, 0xca, ++ 0x3b, 0x6a, 0xce, 0x1b, 0xc3, 0x8a, 0xd1, 0xff, 0xe5, 0x56, ++ 0x4f, 0x39, 0x6e, 0xd9, 0x37, 0x47, 0x4a, 0x3c, 0xea, 0x70, ++ 0xfc, 0x9e, 0xc3, 0x7f, 0x0e, 0xf5, 0x16, 0xa5, 0x4e, 0x77, ++ 0xce, 0xe3, 0x93, 0x3f, 0x43, 0xfa, 0x7f, 0x21, 0x71, 0x1d, ++ 0x6f, 0x34, 0x1c, 0x05, 0x90, 0x77, 0x7e, 0x76, 0xc8, 0x21, ++ 0x1a, 0x43, 0x46, 0x33, 0xe1, 0x16, 0xd9, 0x7f, 0xa3, 0x6b, ++ 0x22, 0x1a, 0xc4, 0xfd, 0x49, 0x62, 0x74, 0xbb, 0x1f, 0xf8, ++ 0x42, 0x74, 0x4b, 0x2a, 0xaa, 0x79, 0x97, 0xed, 0x5e, 0xb9, ++ 0x09, 0x0d, 0xfb, 0x13, 0x3e, 0x3d, 0xa5, 0x28, 0x0c, 0x7e, ++ 0x6e, 0xb9, 0x69, 0x4a, 0xb9, 0xad, 0xea, 0x6d, 0x9b, 0xf8, ++ 0x16, 0xac, 0x1b, 0xa9, 0xff, 0x68, 0xdb, 0x5e, 0xd3, 0xe7, ++ 0x56, 0x9f, 0x00, 0xc4, 0xaf, 0xa1, 0x8a, 0xad, 0x5c, 0x70, ++ 0x0d, 0x4d, 0x3f, 0x92, 0xfc, 0x7a, 0x8a, 0x82, 0x24, 0x34, ++ 0xb6, 0xf8, 0xff, 0x8a, 0x76, 0xea, 0x22, 0xd0, 0x5f, 0x28, ++ 0x45, 0xd9, 0x58, 0xe4, 0x38, 0x6a, 0xc8, 0xfe, 0x6b, 0x68, ++ 0x27, 0x1b, 0xad, 0xeb, 0x32, 0x4d, 0x41, 0x88, 0xb6, 0xf7, ++ 0x02, 0xac, 0x01, 0x68, 0xda, 0xff, 0xd5, 0xac, 0x9f, 0x64, ++ 0x92, 0xa7, 0x18, 0x25, 0x6a, 0x4e, 0xf5, 0xc2, 0xd9, 0x00, ++ 0x88, 0xb2, 0xe0, 0xb8, 0xf0, 0xd0, 0xc6, 0xdb, 0x33, 0xdc, ++ 0x1e, 0x70, 0x5c, 0x63, 0x2f, 0xf4, 0xaa, 0x79, 0x97, 0xfa, ++ 0xbd, 0x42, 0x7f, 0x59, 0x8d, 0x70, 0x6d, 0x5c, 0x75, 0x39, ++ 0x30, 0x91, 0x17, 0x0a, 0x16, 0x16, 0x3d, 0x8a, 0x23, 0xd0, ++ 0x77, 0x2e, 0xfc, 0xf2, 0x0b, 0x85, 0x52, 0xae, 0x00, 0xfc, ++ 0x04, 0x90, 0xa0, 0x5b, 0x0e, 0x07, 0x77, 0x99, 0xfa, 0x32, ++ 0x94, 0x69, 0xae, 0xf9, 0x21, 0x4c, 0x6a, 0x0f, 0xf4, 0xdb, ++ 0x23, 0x8e, 0x62, 0x64, 0xa0, 0x97, 0x6d, 0x1a, 0xcb, 0x2c, ++ 0x17, 0x1c, 0x7d, 0xf2, 0xdc, 0xb6, 0x32, 0xbe, 0xfe, 0xae, ++ 0xee, 0x5b, 0xf8, 0xe5, 0x27, 0xbe, 0x1e, 0x4f, 0xf4, 0x0b, ++ 0x0f, 0xc6, 0x2b, 0xae, 0xec, 0xc0, 0xbd, 0xaa, 0x74, 0xd7, ++ 0x64, 0x08, 0x53, 0xa7, 0x57, 0x45, 0x7a, 0x7d, 0x81, 0x1a, ++ 0xf2, 0xe4, 0x61, 0x65, 0x97, 0xf5, 0x4d, 0x7c, 0x69, 0x13, ++ 0x6d, 0xea, 0x39, 0xd8, 0x52, 0x86, 0xef, 0xd1, 0x6b, 0xbe, ++ 0xf2, 0x9f, 0x18, 0x91, 0xc8, 0x3b, 0x38, 0xe6, 0x2b, 0xb1, ++ 0xe7, 0xef, 0xfc, 0x4f, 0xd7, 0x92, 0x92, 0x60, 0xdd, 0x76, ++ 0x75, 0xa6, 0x68, 0x32, 0xc5, 0x71, 0xba, 0x1f, 0x6a, 0xcb, ++ 0xe2, 0x80, 0x2e, 0xe1, 0xf0, 0x93, 0xec, 0x13, 0x44, 0xc1, ++ 0x1d, 0xc1, 0x84, 0x70, 0x0a, 0x92, 0x9f, 0xa2, 0xde, 0x42, ++ 0x76, 0x70, 0x8a, 0xf6, 0x7a, 0xcd, 0x5f, 0xb0, 0xac, 0x51, ++ 0x16, 0x56, 0xdc, 0xcf, 0x90, 0xa1, 0x7d, 0xfb, 0x13, 0xba, ++ 0x48, 0x01, 0x15, 0x90, 0x43, 0x45, 0x94, 0xcc, 0x23, 0x7d, ++ 0x85, 0x5f, 0xf7, 0xa4, 0x33, 0x80, 0xab, 0xa0, 0xde, 0x25, ++ 0x94, 0x44, 0xec, 0xac, 0x73, 0xa8, 0xb8, 0xce, 0xc9, 0x63, ++ 0x4b, 0x26, 0x43, 0xde, 0xa7, 0x97, 0x2c, 0x5a, 0xed, 0x34, ++ 0x48, 0x8c, 0xfc, 0x27, 0xec, 0x2b, 0x84, 0x8b, 0xae, 0x7c, ++ 0x4e, 0xe6, 0x51, 0xf8, 0xeb, 0xd6, 0x65, 0x04, 0xd2, 0xda, ++ 0x0b, 0x73, 0x8d, 0x2e, 0xd7, 0xa0, 0x74, 0x02, 0xf2, 0xb4, ++ 0xf4, 0x0a, 0x09, 0x06, 0xe3, 0xaa, 0xc9, 0x12, 0x64, 0xda, ++ 0xb4, 0x5c, 0x35, 0xbb, 0x4a, 0xb2, 0xb6, 0x66, 0xb8, 0x65, ++ 0x92, 0x75, 0x29, 0xdc, 0xc5, 0xe4, 0xa3, 0x2d, 0x54, 0xa3, ++ 0x33, 0xc9, 0x70, 0x9b, 0x12, 0x1e, 0x8a, 0x2e, 0x25, 0x8e, ++ 0xb6, 0x56, 0xfd, 0xf6, 0x64, 0xae, 0x2e, 0x64, 0xe2, 0x63, ++ 0x79, 0x7f, 0x3a, 0xe9, 0x4d, 0xdc, 0xf6, 0x4d, 0x29, 0x19, ++ 0xec, 0xcc, 0xc8, 0x0d, 0x96, 0x69, 0x7c, 0x7d, 0x96, 0x9f, ++ 0x34, 0xea, 0xa3, 0xd5, 0x93, 0xaa, 0x5b, 0xaa, 0xe0, 0x98, ++ 0x1f, 0xae, 0x7a, 0xf0, 0xc3, 0x33, 0x99, 0xd6, 0x85, 0x2d, ++ 0x3d, 0x3f, 0xaa, 0xd3, 0xb9, 0x41, 0x5a, 0x1f, 0xfc, 0x5d, ++ 0x90, 0x91, 0x59, 0xb6, 0x3e, 0xf9, 0xbe, 0x7f, 0xf8, 0x36, ++ 0xf1, 0x0d, 0x0d, 0xa5, 0x8b, 0x38, 0x0c, 0x77, 0x7c, 0x7e, ++ 0x8d, 0x86, 0x42, 0x3f, 0x95, 0x9e, 0x62, 0xed, 0x77, 0x30, ++ 0xbb, 0xfe, 0xba, 0x67, 0x62, 0xc5, 0xfc, 0x83, 0x76, 0xbc, ++ 0x6a, 0x52, 0xba, 0x3e, 0x33, 0x89, 0x96, 0xf8, 0xbd, 0x2e, ++ 0x67, 0x04, 0xef, 0xdf, 0xcb, 0x40, 0x9e, 0x0a, 0xb3, 0xf6, ++ 0x93, 0xd8, 0xd1, 0x15, 0x78, 0xbe, 0xdb, 0xc7, 0x31, 0x4f, ++ 0xdc, 0xea, 0x40, 0x58, 0x6b, 0xd6, 0xf1, 0xc7, 0xb4, 0x9d, ++ 0xf8, 0x0b, 0x2f, 0xf0, 0x4b, 0xb9, 0x81, 0xe4, 0x6a, 0xdf, ++ 0x09, 0x4b, 0x6e, 0x6d, 0x82, 0xb7, 0x4b, 0xea, 0xf2, 0x2d, ++ 0x89, 0xac, 0x22, 0xfa, 0x7c, 0x5e, 0xe4, 0x3a, 0xef, 0xae, ++ 0x24, 0x71, 0xca, 0x56, 0xcb, 0x2a, 0x6a, 0xd9, 0x12, 0x80, ++ 0x25, 0x79, 0xe9, 0xbd, 0x9f, 0xa1, 0x36, 0xfb, 0xf6, 0xb2, ++ 0x57, 0x36, 0xa8, 0x7e, 0x5e, 0x17, 0xb9, 0x1a, 0x60, 0x8d, ++ 0xea, 0xb3, 0x96, 0xb5, 0x52, 0xd9, 0xb3, 0xb2, 0xd5, 0x56, ++ 0x7c, 0x86, 0x60, 0x50, 0xca, 0x7b, 0x6f, 0x56, 0xd0, 0xf2, ++ 0x1a, 0xf8, 0xeb, 0x92, 0x91, 0x67, 0x52, 0x97, 0x4f, 0xda, ++ 0x6d, 0x09, 0x9f, 0x06, 0x7d, 0x25, 0xd4, 0x44, 0xbc, 0x2d, ++ 0x52, 0xc1, 0x84, 0x8b, 0xa3, 0xa8, 0x89, 0xdd, 0x54, 0xf6, ++ 0xe1, 0xc8, 0x28, 0x4f, 0xe1, 0x70, 0x5f, 0xb6, 0x9b, 0x5e, ++ 0x7c, 0x8f, 0xb8, 0x84, 0x1a, 0xdc, 0xb3, 0x06, 0xc0, 0xd2, ++ 0x9d, 0x56, 0x2b, 0xad, 0xaa, 0x55, 0x7d, 0x92, 0x9e, 0x59, ++ 0xe5, 0xfe, 0x31, 0x0c, 0x37, 0x6b, 0xc7, 0x53, 0x8a, 0x9f, ++ 0xfd, 0xc6, 0xeb, 0x51, 0xc2, 0x4a, 0xab, 0x68, 0x77, 0x82, ++ 0x97, 0x07, 0x61, 0x31, 0x54, 0xda, 0xa2, 0x92, 0x39, 0xcb, ++ 0xf7, 0xa6, 0x74, 0x95, 0xce, 0xf9, 0x97, 0x87, 0xee, 0x5a, ++ 0x2b, 0xee, 0xd2, 0x35, 0x45, 0x77, 0x68, 0xe4, 0x64, 0x91, ++ 0x88, 0x49, 0x51, 0x1a, 0xaf, 0xaa, 0xc7, 0xc7, 0x69, 0x17, ++ 0x20, 0x09, 0x3d, 0x59, 0xaf, 0x75, 0xea, 0x40, 0x1f, 0x80, ++ 0xb5, 0x9f, 0x1c, 0x1f, 0xdf, 0x6f, 0xe5, 0xfa, 0xbc, 0x27, ++ 0x62, 0xb4, 0xf1, 0x82, 0xb2, 0xa6, 0x17, 0x71, 0x46, 0xf3, ++ 0x70, 0x2b, 0xca, 0x40, 0xd7, 0x32, 0x93, 0xba, 0xff, 0x6a, ++ 0xef, 0x37, 0x01, 0x74, 0x98, 0x93, 0x0b, 0x06, 0xd8, 0xa1, ++ 0x13, 0x30, 0x9d, 0x22, 0x34, 0x73, 0x34, 0x95, 0x3f, 0xc0, ++ 0xad, 0x59, 0x11, 0x73, 0xbd, 0x99, 0x5a, 0x25, 0x5a, 0x5c, ++ 0xa3, 0x54, 0x0c, 0x8c, 0x5f, 0x20, 0x80, 0x79, 0x41, 0x52, ++ 0x49, 0x3e, 0x8f, 0x58, 0x44, 0x98, 0xc3, 0x29, 0xc3, 0x78, ++ 0xd1, 0xdf, 0x3d, 0x2e, 0x8b, 0xf5, 0xc9, 0x8a, 0x81, 0x58, ++ 0xf5, 0xd7, 0xa1, 0xac, 0xc1, 0xbc, 0xba, 0x85, 0x4e, 0x4d, ++ 0x85, 0xd5, 0x8b, 0xd2, 0x3d, 0xa7, 0x72, 0x75, 0xab, 0x26, ++ 0xe7, 0x42, 0xf3, 0xb3, 0xfe, 0xfe, 0x45, 0x65, 0xbc, 0xed, ++ 0x5f, 0x59, 0x47, 0x57, 0x08, 0x40, 0x10, 0xcb, 0x68, 0xc2, ++ 0x9f, 0x10, 0x6f, 0x4e, 0xd9, 0x62, 0x1a, 0x12, 0x3b, 0xf4, ++ 0x4b, 0x14, 0xf8, 0x94, 0xb9, 0x1d, 0xbc, 0x57, 0xfb, 0xb4, ++ 0x94, 0x95, 0xf5, 0x30, 0x64, 0xaa, 0x18, 0xb7, 0xfe, 0x0d, ++ 0xfd, 0xcd, 0x08, 0x72, 0x08, 0xd8, 0xc9, 0xbd, 0x05, 0xbc, ++ 0xb0, 0x76, 0x70, 0xb1, 0x4c, 0x32, 0xbc, 0x6e, 0x1b, 0xc9, ++ 0x11, 0xed, 0xf6, 0xa4, 0x5e, 0x72, 0xc0, 0x11, 0x65, 0xfd, ++ 0x51, 0xb0, 0xb5, 0x27, 0x46, 0x53, 0x71, 0xba, 0xca, 0x69, ++ 0x23, 0x4d, 0x08, 0x1b, 0x37, 0x10, 0x9a, 0x69, 0x31, 0x3c, ++ 0x91, 0x37, 0xbb, 0xa5, 0x2b, 0xbb, 0xdd, 0xd0, 0xd0, 0x1a, ++ 0xcb, 0x2c, 0x67, 0x23, 0xbd, 0xfa, 0xd1, 0xb3, 0x27, 0x7d, ++ 0x84, 0x66, 0xca, 0x68, 0x9b, 0xce, 0x17, 0xda, 0x37, 0xcc, ++ 0xdd, 0xdc, 0xd2, 0x2a, 0x03, 0x85, 0x37, 0x83, 0xae, 0x89, ++ 0x93, 0x8a, 0x1d, 0x16, 0x34, 0xba, 0xd1, 0x79, 0x34, 0x3e, ++ 0xed, 0xe3, 0xe9, 0xb0, 0x21, 0x16, 0xee, 0x07, 0x03, 0x53, ++ 0x45, 0x19, 0x56, 0x06, 0x7a, 0x47, 0x05, 0x03, 0x77, 0x3b, ++ 0x7a, 0x74, 0x07, 0x73, 0xc6, 0x1d, 0x4e, 0x64, 0xef, 0xae, ++ 0x33, 0x54, 0x09, 0x87, 0x73, 0x2a, 0x38, 0xba, 0x22, 0x3b, ++ 0xb4, 0x0b, 0x2c, 0x45, 0x80, 0xf9, 0xe1, 0x15, 0xb6, 0xa6, ++ 0xe7, 0xb9, 0x39, 0xf7, 0xeb, 0x18, 0xba, 0xb7, 0xf4, 0xcb, ++ 0x30, 0x60, 0xc7, 0xb0, 0x7f, 0x1a, 0x45, 0x87, 0x40, 0x85, ++ 0x93, 0xe5, 0x13, 0x59, 0x84, 0xd3, 0xf4, 0x1b, 0x6f, 0xa0, ++ 0x56, 0xfe, 0xf6, 0xae, 0x17, 0xc1, 0x47, 0x98, 0x5a, 0x3d, ++ 0x4d, 0x2e, 0x88, 0x19, 0x62, 0xae, 0x5f, 0x1e, 0x8c, 0xdf, ++ 0x9f, 0x27, 0x7a, 0xef, 0x1a, 0x69, 0x8f, 0x0c, 0xdb, 0x22, ++ 0xd0, 0xde, 0x46, 0xc6, 0x69, 0xee, 0x2f, 0x34, 0x7f, 0x74, ++ 0xdc, 0x6b, 0xf1, 0xfa, 0x5e, 0x7e, 0x7d, 0xa3, 0xd8, 0x39, ++ 0x06, 0x59, 0x65, 0xa4, 0x1c, 0xb4, 0x23, 0xc6, 0xaa, 0xdd, ++ 0x76, 0xf6, 0xbf, 0xa2, 0xc1, 0x1a, 0x26, 0x7a, 0x97, 0x11, ++ 0x06, 0x22, 0x0f, 0x2e, 0xbf, 0xee, 0x78, 0xe1, 0xba, 0xf8, ++ 0x53, 0x91, 0x64, 0x12, 0xdd, 0x12, 0x7b, 0xe5, 0x73, 0x70, ++ 0x3b, 0x45, 0x05, 0x48, 0x39, 0x8d, 0xae, 0xf2, 0xe2, 0xfd, ++ 0x6e, 0x06, 0x20, 0x1f, 0x85, 0x5f, 0xee, 0xe9, 0xfd, 0xca, ++ 0x8c, 0x52, 0x2a, 0x76, 0x45, 0xdb, 0xb2, 0xf3, 0x97, 0x7e, ++ 0x74, 0xb1, 0x61, 0x8d, 0x04, 0xe3, 0xcb, 0x48, 0xfb, 0xca, ++ 0x93, 0xe6, 0x93, 0xec, 0xd0, 0xfd, 0x96, 0xd3, 0xf4, 0xde, ++ 0x7e, 0x19, 0xcd, 0x66, 0xa3, 0xe9, 0xe2, 0xab, 0xd8, 0xff, ++ 0xed, 0xd0, 0x5e, 0x8d, 0xaf, 0x47, 0x8f, 0xf3, 0xb1, 0x5d, ++ 0x7c, 0x1c, 0xdb, 0x87, 0xd9, 0xfd, 0x87, 0xd9, 0xe8, 0x93, ++ 0x9d, 0xcc, 0xc3, 0x4a, 0xec, 0x8d, 0xbd, 0x9d, 0x8d, 0xc7, ++ 0xf6, 0xfe, 0xd6, 0x5e, 0x7f, 0x1c, 0xcd, 0x3e, 0x8c, 0x07, ++ 0x7c, 0x6e, 0x36, 0xe6, 0x13, 0x31, 0x2d, 0x2e, 0xc8, 0x46, ++ 0x04, 0xf0, 0xd4, 0xbd, 0xfc, 0x3c, 0xfe, 0x63, 0x31, 0x9e, ++ 0x2e, 0xec, 0xc3, 0x78, 0xf6, 0x69, 0xb2, 0x58, 0x80, 0xda, ++ 0xd5, 0x57, 0x3b, 0x7a, 0x78, 0x00, 0xf1, 0xd1, 0xd5, 0xdd, ++ 0xd8, 0xde, 0x8d, 0xbe, 0x40, 0x9b, 0xe3, 0x3f, 0xae, 0xc7, ++ 0x0f, 0x0b, 0xfb, 0xe5, 0xe3, 0x78, 0x6a, 0xee, 0x49, 0xfe, ++ 0xcb, 0x04, 0xfc, 0xcc, 0x17, 0x23, 0xbe, 0x30, 0x99, 0xda, ++ 0x2f, 0xb3, 0xc9, 0x62, 0x32, 0xfd, 0x20, 0x04, 0xb9, 0x85, ++ 0x3b, 0x9b, 0x7c, 0xf8, 0xb8, 0xb0, 0x1f, 0xef, 0xef, 0x6e, ++ 0xc6, 0x33, 0x59, 0xd5, 0xfd, 0x19, 0xa7, 0xcb, 0x8b, 0xf6, ++ 0x61, 0x34, 0x5b, 0x4c, 0xc6, 0x73, 0x03, 0x3e, 0x3e, 0x4f, ++ 0x6e, 0xfa, 0x42, 0xbd, 0x19, 0xcd, 0xc1, 0xf6, 0x1b, 0xfb, ++ 0x65, 0xb2, 0xf8, 0x78, 0xff, 0xb8, 0x68, 0x99, 0xa7, 0x70, ++ 0xa3, 0xe9, 0x57, 0xfb, 0xcf, 0xc9, 0xf4, 0x66, 0x60, 0xc7, ++ 0x13, 0x21, 0x34, 0xfe, 0xe3, 0x61, 0x36, 0x9e, 0x43, 0x7e, ++ 0x03, 0xda, 0x93, 0x4f, 0xe0, 0x78, 0x8c, 0x2f, 0x27, 0xd3, ++ 0xeb, 0xbb, 0xc7, 0x1b, 0xd9, 0x02, 0xbe, 0x02, 0x85, 0xe9, ++ 0xfd, 0x02, 0x7a, 0x82, 0x64, 0xe0, 0x73, 0x71, 0x2f, 0xaa, ++ 0x09, 0xcf, 0x06, 0xea, 0x60, 0x06, 0xf4, 0xcd, 0xa7, 0xf1, ++ 0x0c, 0xfa, 0x9b, 0x2e, 0x46, 0x57, 0x93, 0xbb, 0x09, 0x8e, ++ 0xe4, 0xda, 0xf0, 0xed, 0x64, 0x31, 0xc5, 0x11, 0xb2, 0x5c, ++ 0x3c, 0x52, 0xce, 0xaf, 0x1f, 0xef, 0x46, 0x10, 0xe2, 0x71, ++ 0xf6, 0x70, 0x3f, 0x1f, 0x73, 0x7c, 0x43, 0x15, 0x82, 0x08, ++ 0x14, 0x3e, 0x9b, 0xcc, 0xff, 0x69, 0x47, 0x73, 0xe3, 0x15, ++ 0xfb, 0xfb, 0xe3, 0xa8, 0x25, 0x04, 0xed, 0x82, 0xc6, 0xa7, ++ 0xd1, 0xf4, 0x5a, 0x0c, 0x75, 0x64, 0x48, 0x8a, 0x6b, 0xbf, ++ 0xde, 0x3f, 0xb2, 0x6a, 0x40, 0xee, 0xbb, 0x1b, 0x3e, 0x60, ++ 0xc2, 0x03, 0x54, 0xd4, 0xd8, 0xde, 0x8c, 0x6f, 0xc7, 0xd7, ++ 0x8b, 0xc9, 0x67, 0x98, 0x17, 0x4f, 0xe2, 0x98, 0xf9, 0xe3, ++ 0xa7, 0xb1, 0xd7, 0xf7, 0x7c, 0x21, 0x0a, 0xba, 0xbb, 0xb3, ++ 0xd3, 0xf1, 0x35, 0xf8, 0x1d, 0xcd, 0xbe, 0xda, 0xf9, 0x78, ++ 0xf6, 0x79, 0x72, 0x4d, 0x3d, 0x98, 0xd9, 0xf8, 0x61, 0x34, ++ 0x81, 0xfa, 0xb9, 0x20, 0x3d, 0x9b, 0x91, 0xca, 0xfd, 0x54, ++ 0x73, 0xcb, 0xbb, 0x21, 0x8d, 0x07, 0x2f, 0x19, 0x7f, 0xa6, ++ 0x0f, 0x3c, 0x4e, 0xef, 0x28, 0xed, 0x6c, 0xfc, 0xfb, 0x23, ++ 0xe4, 0x39, 0xe3, 0x09, 0xa4, 0x31, 0xfa, 0x00, 0x6f, 0xa3, ++ 0x32, 0x23, 0xbb, 0x9b, 0x2f, 0x13, 0x1c, 0x4e, 0x0b, 0x1d, ++ 0x1b, 0x7f, 0x20, 0xaf, 0xe0, 0x8b, 0xce, 0xf8, 0x5f, 0xe1, ++ 0x46, 0xf7, 0xf6, 0xd3, 0xe8, 0xab, 0x6e, 0x65, 0x7f, 0xf5, ++ 0xee, 0x01, 0x36, 0xdb, 0xb5, 0xed, 0xbe, 0x57, 0xc0, 0x29, ++ 0x3a, 0xef, 0x1c, 0x5d, 0xdd, 0x53, 0x07, 0x57, 0xe0, 0x67, ++ 0x22, 0x6c, 0x81, 0x11, 0x2a, 0x84, 0x26, 0xba, 0x19, 0x7d, ++ 0x1a, 0x7d, 0x18, 0xcf, 0x07, 0xa6, 0x75, 0x02, 0x39, 0xda, ++ 0x6f, 0x92, 0x0f, 0xec, 0xfc, 0x61, 0x7c, 0x3d, 0xe1, 0x5f, ++ 0xf0, 0x3d, 0x5c, 0x0f, 0xb6, 0xbe, 0x53, 0xad, 0x20, 0x8a, ++ 0x7e, 0x7f, 0xa4, 0x15, 0xf1, 0x81, 0x27, 0x62, 0x47, 0x30, ++ 0x27, 0x45, 0xa3, 0x1f, 0x7a, 0x93, 0x31, 0x06, 0xe9, 0x6b, ++ 0xd3, 0xe0, 0x23, 0x38, 0xfb, 0x38, 0x2e, 0x2f, 0xba, 0xb3, ++ 0x8f, 0xfc, 0x8f, 0x7e, 0x71, 0x77, 0x3f, 0xa7, 0xb3, 0xe1, ++ 0x90, 0xc5, 0xc8, 0x0a, 0xc7, 0xf8, 0xf3, 0x6a, 0xcc, 0xa7, ++ 0x67, 0xe3, 0x29, 0xf4, 0x25, 0xe1, 0x34, 0xba, 0xbe, 0x7e, ++ 0x9c, 0x21, 0xb4, 0xf8, 0x04, 0xdf, 0x00, 0x37, 0xf3, 0x47, ++ 0x04, 0xdb, 0x64, 0x2a, 0x46, 0x31, 0x94, 0x57, 0xa2, 0x79, ++ 0x32, 0xbb, 0x09, 0xf1, 0x24, 0x7a, 0xb6, 0xb7, 0xa3, 0xc9, ++ 0xdd, 0xe3, 0xec, 0xc4, 0xc7, 0x70, 0xf2, 0x3d, 0x54, 0x48, ++ 0x92, 0xe2, 0x6b, 0xad, 0x41, 0x82, 0x93, 0xcd, 0x2f, 0x07, ++ 0xe2, 0x03, 0x76, 0x72, 0x8b, 0xa3, 0xae, 0x3f, 0x7a, 0xeb, ++ 0xd9, 0x5e, 0xd4, 0x7e, 0xb5, 0x1f, 0x61, 0x8a, 0xab, 0x31, ++ 0x1e, 0x1b, 0xdd, 0x7c, 0x9e, 0x30, 0xf3, 0xe8, 0x39, 0x06, ++ 0xb1, 0x30, 0x9f, 0x78, 0x9d, 0xdc, 0x7b, 0x0a, 0x5e, 0x8f, ++ 0xed, 0x4e, 0x3f, 0xa2, 0x44, 0x9f, 0x3f, 0xb3, 0xbd, 0x6f, ++ 0xfe, 0x17, 0x84, 0xf3, 0x1b, 0xef, 0x12, 0x3b, 0x00, 0x00, ++ ++}; +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -110,6 +110,7 @@ + CFG_CMD_MMC | \ + CFG_CMD_FAT | \ + CFG_CMD_EXT2 | \ ++ CFG_CMD_LICENSE | \ + 0) + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + #include <cmd_confdefs.h> +Index: u-boot/include/configs/hxd8.h +=================================================================== +--- u-boot.orig/include/configs/hxd8.h ++++ u-boot/include/configs/hxd8.h +@@ -110,6 +110,7 @@ + CFG_CMD_MMC | \ + CFG_CMD_FAT | \ + CFG_CMD_EXT2 | \ ++ CFG_CMD_LICENSE | \ + 0) + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ + #include <cmd_confdefs.h> +Index: u-boot/include/configs/smdk2440.h +=================================================================== +--- u-boot.orig/include/configs/smdk2440.h ++++ u-boot/include/configs/smdk2440.h +@@ -110,6 +110,7 @@ + CFG_CMD_PORTIO | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SAVES | \ ++ CFG_CMD_LICENSE | \ + CFG_CMD_USB) + + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-machtypes.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-machtypes.patch new file mode 100644 index 0000000000..db3cee6e99 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-machtypes.patch @@ -0,0 +1,4121 @@ +This adds a more recent version of mach-types.h to u-boot + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/include/asm-arm/mach-types.h +=================================================================== +--- u-boot.orig/include/asm-arm/mach-types.h ++++ u-boot/include/asm-arm/mach-types.h +@@ -424,7 +424,7 @@ + #define MACH_TYPE_MPORT3S 411 + #define MACH_TYPE_RA_ALPHA 412 + #define MACH_TYPE_XCEP 413 +-#define MACH_TYPE_ARCOM_MERCURY 414 ++#define MACH_TYPE_ARCOM_VULCAN 414 + #define MACH_TYPE_STARGATE 415 + #define MACH_TYPE_ARMADILLOJ 416 + #define MACH_TYPE_ELROY_JACK 417 +@@ -457,7 +457,7 @@ + #define MACH_TYPE_XM250 444 + #define MACH_TYPE_T6TC1XB 445 + #define MACH_TYPE_ESS710 446 +-#define MACH_TYPE_MX3ADS 447 ++#define MACH_TYPE_MX31ADS 447 + #define MACH_TYPE_HIMALAYA 448 + #define MACH_TYPE_BOLFENK 449 + #define MACH_TYPE_AT91RM9200KR 450 +@@ -736,7 +736,311 @@ + #define MACH_TYPE_LN2410SBC 725 + #define MACH_TYPE_CB3RUFC 726 + #define MACH_TYPE_MP2USB 727 +-#define MACH_TYPE_PDNB3 1002 ++#define MACH_TYPE_NTNP425C 728 ++#define MACH_TYPE_COLIBRI 729 ++#define MACH_TYPE_PCM7220 730 ++#define MACH_TYPE_GATEWAY7001 731 ++#define MACH_TYPE_PCM027 732 ++#define MACH_TYPE_CMPXA 733 ++#define MACH_TYPE_ANUBIS 734 ++#define MACH_TYPE_ITE8152 735 ++#define MACH_TYPE_LPC3XXX 736 ++#define MACH_TYPE_PUPPETEER 737 ++#define MACH_TYPE_MACH_VADATECH 738 ++#define MACH_TYPE_E570 739 ++#define MACH_TYPE_X50 740 ++#define MACH_TYPE_RECON 741 ++#define MACH_TYPE_XBOARDGP8 742 ++#define MACH_TYPE_FPIC2 743 ++#define MACH_TYPE_AKITA 744 ++#define MACH_TYPE_A81 745 ++#define MACH_TYPE_SVM_SC25X 746 ++#define MACH_TYPE_VADATECH020 747 ++#define MACH_TYPE_TLI 748 ++#define MACH_TYPE_EDB9315LC 749 ++#define MACH_TYPE_PASSEC 750 ++#define MACH_TYPE_DS_TIGER 751 ++#define MACH_TYPE_E310 752 ++#define MACH_TYPE_E330 753 ++#define MACH_TYPE_RT3000 754 ++#define MACH_TYPE_NOKIA770 755 ++#define MACH_TYPE_PNX0106 756 ++#define MACH_TYPE_HX21XX 757 ++#define MACH_TYPE_FARADAY 758 ++#define MACH_TYPE_SBC9312 759 ++#define MACH_TYPE_BATMAN 760 ++#define MACH_TYPE_JPD201 761 ++#define MACH_TYPE_MIPSA 762 ++#define MACH_TYPE_KACOM 763 ++#define MACH_TYPE_SWARCOCPU 764 ++#define MACH_TYPE_SWARCODSL 765 ++#define MACH_TYPE_BLUEANGEL 766 ++#define MACH_TYPE_HAIRYGRAMA 767 ++#define MACH_TYPE_BANFF 768 ++#define MACH_TYPE_CARMEVA 769 ++#define MACH_TYPE_SAM255 770 ++#define MACH_TYPE_PPM10 771 ++#define MACH_TYPE_EDB9315A 772 ++#define MACH_TYPE_SUNSET 773 ++#define MACH_TYPE_STARGATE2 774 ++#define MACH_TYPE_INTELMOTE2 775 ++#define MACH_TYPE_TRIZEPS4 776 ++#define MACH_TYPE_MAINSTONE2 777 ++#define MACH_TYPE_EZ_IXP42X 778 ++#define MACH_TYPE_TAPWAVE_ZODIAC 779 ++#define MACH_TYPE_UNIVERSALMETER 780 ++#define MACH_TYPE_HICOARM9 781 ++#define MACH_TYPE_PNX4008 782 ++#define MACH_TYPE_KWS6000 783 ++#define MACH_TYPE_PORTUX920T 784 ++#define MACH_TYPE_EZ_X5 785 ++#define MACH_TYPE_OMAP_RUDOLPH 786 ++#define MACH_TYPE_CPUAT91 787 ++#define MACH_TYPE_REA9200 788 ++#define MACH_TYPE_ACTS_PUNE_SA1110 789 ++#define MACH_TYPE_IXP425 790 ++#define MACH_TYPE_ARGONPLUSODYSSEY 791 ++#define MACH_TYPE_PERCH 792 ++#define MACH_TYPE_EIS05R1 793 ++#define MACH_TYPE_PEPPERPAD 794 ++#define MACH_TYPE_SB3010 795 ++#define MACH_TYPE_RM9200 796 ++#define MACH_TYPE_DMA03 797 ++#define MACH_TYPE_ROAD_S101 798 ++#define MACH_TYPE_IQ_NEXTGEN_A 799 ++#define MACH_TYPE_IQ_NEXTGEN_B 800 ++#define MACH_TYPE_IQ_NEXTGEN_C 801 ++#define MACH_TYPE_IQ_NEXTGEN_D 802 ++#define MACH_TYPE_IQ_NEXTGEN_E 803 ++#define MACH_TYPE_MALLOW_AT91 804 ++#define MACH_TYPE_CYBERTRACKER_I 805 ++#define MACH_TYPE_GESBC931X 806 ++#define MACH_TYPE_CENTIPAD 807 ++#define MACH_TYPE_ARMSOC 808 ++#define MACH_TYPE_SE4200 809 ++#define MACH_TYPE_EMS197A 810 ++#define MACH_TYPE_MICRO9 811 ++#define MACH_TYPE_MICRO9L 812 ++#define MACH_TYPE_UC5471DSP 813 ++#define MACH_TYPE_SJ5471ENG 814 ++#define MACH_TYPE_CMPXA26X 815 ++#define MACH_TYPE_NC 816 ++#define MACH_TYPE_OMAP_PALMTE 817 ++#define MACH_TYPE_AJAX52X 818 ++#define MACH_TYPE_SIRIUSTAR 819 ++#define MACH_TYPE_IODATA_HDLG 820 ++#define MACH_TYPE_AT91RM9200UTL 821 ++#define MACH_TYPE_BIOSAFE 822 ++#define MACH_TYPE_MP1000 823 ++#define MACH_TYPE_PARSY 824 ++#define MACH_TYPE_CCXP 825 ++#define MACH_TYPE_OMAP_GSAMPLE 826 ++#define MACH_TYPE_REALVIEW_EB 827 ++#define MACH_TYPE_SAMOA 828 ++#define MACH_TYPE_T3XSCALE 829 ++#define MACH_TYPE_I878 830 ++#define MACH_TYPE_BORZOI 831 ++#define MACH_TYPE_GECKO 832 ++#define MACH_TYPE_DS101 833 ++#define MACH_TYPE_OMAP_PALMTT2 834 ++#define MACH_TYPE_XSCALE_PALMLD 835 ++#define MACH_TYPE_CC9C 836 ++#define MACH_TYPE_SBC1670 837 ++#define MACH_TYPE_IXDP28X5 838 ++#define MACH_TYPE_OMAP_PALMTT 839 ++#define MACH_TYPE_ML696K 840 ++#define MACH_TYPE_ARCOM_ZEUS 841 ++#define MACH_TYPE_OSIRIS 842 ++#define MACH_TYPE_MAESTRO 843 ++#define MACH_TYPE_TUNGE2 844 ++#define MACH_TYPE_IXBBM 845 ++#define MACH_TYPE_MX27 846 ++#define MACH_TYPE_AX8004 847 ++#define MACH_TYPE_AT91SAM9261EK 848 ++#define MACH_TYPE_LOFT 849 ++#define MACH_TYPE_MAGPIE 850 ++#define MACH_TYPE_MX21 851 ++#define MACH_TYPE_MB87M3400 852 ++#define MACH_TYPE_MGUARD_DELTA 853 ++#define MACH_TYPE_DAVINCI_DVDP 854 ++#define MACH_TYPE_HTCUNIVERSAL 855 ++#define MACH_TYPE_TPAD 856 ++#define MACH_TYPE_ROVERP3 857 ++#define MACH_TYPE_JORNADA928 858 ++#define MACH_TYPE_MV88FXX81 859 ++#define MACH_TYPE_STMP36XX 860 ++#define MACH_TYPE_SXNI79524 861 ++#define MACH_TYPE_AMS_DELTA 862 ++#define MACH_TYPE_URANIUM 863 ++#define MACH_TYPE_UCON 864 ++#define MACH_TYPE_NAS100D 865 ++#define MACH_TYPE_L083_1000 866 ++#define MACH_TYPE_EZX 867 ++#define MACH_TYPE_PNX5220 868 ++#define MACH_TYPE_BUTTE 869 ++#define MACH_TYPE_SRM2 870 ++#define MACH_TYPE_DSBR 871 ++#define MACH_TYPE_CRYSTALBALL 872 ++#define MACH_TYPE_TINYPXA27X 873 ++#define MACH_TYPE_HERBIE 874 ++#define MACH_TYPE_MAGICIAN 875 ++#define MACH_TYPE_CM4002 876 ++#define MACH_TYPE_B4 877 ++#define MACH_TYPE_MAUI 878 ++#define MACH_TYPE_CYBERTRACKER_G 879 ++#define MACH_TYPE_NXDKN 880 ++#define MACH_TYPE_MIO8390 881 ++#define MACH_TYPE_OMI_BOARD 882 ++#define MACH_TYPE_MX21CIV 883 ++#define MACH_TYPE_MAHI_CDAC 884 ++#define MACH_TYPE_XSCALE_PALMTX 885 ++#define MACH_TYPE_S3C2413 887 ++#define MACH_TYPE_SAMSYS_EP0 888 ++#define MACH_TYPE_WG302V1 889 ++#define MACH_TYPE_WG302V2 890 ++#define MACH_TYPE_EB42X 891 ++#define MACH_TYPE_IQ331ES 892 ++#define MACH_TYPE_COSYDSP 893 ++#define MACH_TYPE_UPLAT7D 894 ++#define MACH_TYPE_PTDAVINCI 895 ++#define MACH_TYPE_MBUS 896 ++#define MACH_TYPE_NADIA2VB 897 ++#define MACH_TYPE_R1000 898 ++#define MACH_TYPE_HW90250 899 ++#define MACH_TYPE_OMAP_2430SDP 900 ++#define MACH_TYPE_DAVINCI_EVM 901 ++#define MACH_TYPE_OMAP_TORNADO 902 ++#define MACH_TYPE_OLOCREEK 903 ++#define MACH_TYPE_PALMZ72 904 ++#define MACH_TYPE_NXDB500 905 ++#define MACH_TYPE_APF9328 906 ++#define MACH_TYPE_OMAP_WIPOQ 907 ++#define MACH_TYPE_OMAP_TWIP 908 ++#define MACH_TYPE_XSCALE_PALMTREO650 909 ++#define MACH_TYPE_ACUMEN 910 ++#define MACH_TYPE_XP100 911 ++#define MACH_TYPE_FS2410 912 ++#define MACH_TYPE_PXA270_CERF 913 ++#define MACH_TYPE_SQ2FTLPALM 914 ++#define MACH_TYPE_BSEMSERVER 915 ++#define MACH_TYPE_NETCLIENT 916 ++#define MACH_TYPE_XSCALE_PALMTT5 917 ++#define MACH_TYPE_OMAP_PALMTC 918 ++#define MACH_TYPE_OMAP_APOLLON 919 ++#define MACH_TYPE_ARGONLVEVB 920 ++#define MACH_TYPE_REA_2D 921 ++#define MACH_TYPE_TI3E524 922 ++#define MACH_TYPE_ATEB9200 923 ++#define MACH_TYPE_AUCKLAND 924 ++#define MACH_TYPE_AK3320M 925 ++#define MACH_TYPE_DURAMAX 926 ++#define MACH_TYPE_N35 927 ++#define MACH_TYPE_PRONGHORN 928 ++#define MACH_TYPE_FUNDY 929 ++#define MACH_TYPE_LOGICPD_PXA270 930 ++#define MACH_TYPE_CPU777 931 ++#define MACH_TYPE_SIMICON9201 932 ++#define MACH_TYPE_LEAP2_HPM 933 ++#define MACH_TYPE_CM922TXA10 934 ++#define MACH_TYPE_PXA 935 ++#define MACH_TYPE_SANDGATE2 936 ++#define MACH_TYPE_SANDGATE2G 937 ++#define MACH_TYPE_SANDGATE2P 938 ++#define MACH_TYPE_FRED_JACK 939 ++#define MACH_TYPE_TTG_COLOR1 940 ++#define MACH_TYPE_NXEB500HMI 941 ++#define MACH_TYPE_NETDCU8 942 ++#define MACH_TYPE_ML675050_CPU_BOA 943 ++#define MACH_TYPE_NG_FVX538 944 ++#define MACH_TYPE_NG_FVS338 945 ++#define MACH_TYPE_PNX4103 946 ++#define MACH_TYPE_HESDB 947 ++#define MACH_TYPE_XSILO 948 ++#define MACH_TYPE_ESPRESSO 949 ++#define MACH_TYPE_EMLC 950 ++#define MACH_TYPE_SISTERON 951 ++#define MACH_TYPE_RX1950 952 ++#define MACH_TYPE_TSC_VENUS 953 ++#define MACH_TYPE_DS101J 954 ++#define MACH_TYPE_MXC30030ADS 955 ++#define MACH_TYPE_FUJITSU_WIMAXSOC 956 ++#define MACH_TYPE_DUALPCMODEM 957 ++#define MACH_TYPE_GESBC9312 958 ++#define MACH_TYPE_HTCAPACHE 959 ++#define MACH_TYPE_IXDP435 960 ++#define MACH_TYPE_CATPROVT100 961 ++#define MACH_TYPE_PICOTUX1XX 962 ++#define MACH_TYPE_PICOTUX2XX 963 ++#define MACH_TYPE_DSMG600 964 ++#define MACH_TYPE_EMPC2 965 ++#define MACH_TYPE_VENTURA 966 ++#define MACH_TYPE_PHIDGET_SBC 967 ++#define MACH_TYPE_IJ3K 968 ++#define MACH_TYPE_PISGAH 969 ++#define MACH_TYPE_OMAP_FSAMPLE 970 ++#define MACH_TYPE_SG720 971 ++#define MACH_TYPE_REDFOX 972 ++#define MACH_TYPE_MYSH_EP9315_1 973 ++#define MACH_TYPE_TPF106 974 ++#define MACH_TYPE_AT91RM9200KG 975 ++#define MACH_TYPE_SLEDB 976 ++#define MACH_TYPE_ONTRACK 977 ++#define MACH_TYPE_PM1200 978 ++#define MACH_TYPE_ESS24XXX 979 ++#define MACH_TYPE_COREMP7 980 ++#define MACH_TYPE_NEXCODER_6446 981 ++#define MACH_TYPE_STVC8380 982 ++#define MACH_TYPE_TEKLYNX 983 ++#define MACH_TYPE_CARBONADO 984 ++#define MACH_TYPE_SYSMOS_MP730 985 ++#define MACH_TYPE_SNAPPER_CL15 986 ++#define MACH_TYPE_PGIGIM 987 ++#define MACH_TYPE_PTX9160P2 988 ++#define MACH_TYPE_DCORE1 989 ++#define MACH_TYPE_VICTORPXA 990 ++#define MACH_TYPE_MX2DTB 991 ++#define MACH_TYPE_PXA_IREX_ER0100 992 ++#define MACH_TYPE_OMAP_PALMZ71 993 ++#define MACH_TYPE_BARTEC_DEG 994 ++#define MACH_TYPE_HW50251 995 ++#define MACH_TYPE_IBOX 996 ++#define MACH_TYPE_ATLASLH7A404 997 ++#define MACH_TYPE_PT2026 998 ++#define MACH_TYPE_HTCALPINE 999 ++#define MACH_TYPE_BARTEC_VTU 1000 ++#define MACH_TYPE_VCOREII 1001 ++#define MACH_TYPE_PDNB3 1002 ++#define MACH_TYPE_HTCBEETLES 1003 ++#define MACH_TYPE_S3C6400 1004 ++#define MACH_TYPE_S3C2443 1005 ++#define MACH_TYPE_OMAP_LDK 1006 ++#define MACH_TYPE_SMDK2460 1007 ++#define MACH_TYPE_SMDK2440 1008 ++#define MACH_TYPE_SMDK2412 1009 ++#define MACH_TYPE_WEBBOX 1010 ++#define MACH_TYPE_CWWNDP 1011 ++#define MACH_TYPE_DRAGON 1012 ++#define MACH_TYPE_OPENDO_CPU_BOARD 1013 ++#define MACH_TYPE_CCM2200 1014 ++#define MACH_TYPE_ETWARM 1015 ++#define MACH_TYPE_M93030 1016 ++#define MACH_TYPE_CC7U 1017 ++#define MACH_TYPE_MTT_RANGER 1018 ++#define MACH_TYPE_NEXUS 1019 ++#define MACH_TYPE_DESMAN 1020 ++#define MACH_TYPE_BKDE303 1021 ++#define MACH_TYPE_SMDK2413 1022 ++#define MACH_TYPE_AML_M7200 1023 ++#define MACH_TYPE_AML_M5900 1024 ++#define MACH_TYPE_SG640 1025 ++#define MACH_TYPE_EDG79524 1026 ++#define MACH_TYPE_AI2410 1027 ++#define MACH_TYPE_IXP465 1028 ++#define MACH_TYPE_BALLOON3 1029 ++#define MACH_TYPE_QT2410 1108 ++#define MACH_TYPE_NEO1973_GTA01 1182 ++#define MACH_TYPE_HXD8 1303 ++#define MACH_TYPE_NEO1973_GTA02 1304 + + #ifdef CONFIG_ARCH_EBSA110 + # ifdef machine_arch_type +@@ -3541,9 +3845,9 @@ + # else + # define machine_arch_type MACH_TYPE_RAMSES + # endif +-# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) ++# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) + #else +-# define machine_is_ramses() (0) ++# define machine_is_mnci() (0) + #endif + + #ifdef CONFIG_ARCH_S28X +@@ -4501,9 +4805,9 @@ + # else + # define machine_arch_type MACH_TYPE_M825XX + # endif +-# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) ++# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) + #else +-# define machine_is_m825xx() (0) ++# define machine_is_comcerto() (0) + #endif + + #ifdef CONFIG_SA1100_M7100 +@@ -5658,16 +5962,16 @@ + # define machine_is_xcep() (0) + #endif + +-#ifdef CONFIG_MACH_ARCOM_MERCURY ++#ifdef CONFIG_MACH_ARCOM_VULCAN + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_ARCOM_MERCURY ++# define machine_arch_type MACH_TYPE_ARCOM_VULCAN + # endif +-# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) ++# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) + #else +-# define machine_is_arcom_mercury() (0) ++# define machine_is_arcom_vulcan() (0) + #endif + + #ifdef CONFIG_MACH_STARGATE +@@ -6054,16 +6358,16 @@ + # define machine_is_ess710() (0) + #endif + +-#ifdef CONFIG_MACH_MX3ADS ++#ifdef CONFIG_MACH_MX31ADS + # ifdef machine_arch_type + # undef machine_arch_type + # define machine_arch_type __machine_arch_type + # else +-# define machine_arch_type MACH_TYPE_MX3ADS ++# define machine_arch_type MACH_TYPE_MX31ADS + # endif +-# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) ++# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) + #else +-# define machine_is_mx3ads() (0) ++# define machine_is_mx31ads() (0) + #endif + + #ifdef CONFIG_MACH_HIMALAYA +@@ -7333,9 +7637,9 @@ + # else + # define machine_arch_type MACH_TYPE_ARGONPLUSEVB + # endif +-# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) ++# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) + #else +-# define machine_is_argonplusevb() (0) ++# define machine_is_i30030evb() (0) + #endif + + #ifdef CONFIG_MACH_SCMA11EVB +@@ -7345,9 +7649,9 @@ + # else + # define machine_arch_type MACH_TYPE_SCMA11EVB + # endif +-# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) ++# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) + #else +-# define machine_is_scma11evb() (0) ++# define machine_is_mxc27530evb() (0) + #endif + + #ifdef CONFIG_MACH_SMDK2800 +@@ -8305,9 +8609,9 @@ + # else + # define machine_arch_type MACH_TYPE_SCMA11BB + # endif +-# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB) ++# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_SCMA11BB) + #else +-# define machine_is_scma11bb() (0) ++# define machine_is_mxc27530ads() (0) + #endif + + #ifdef CONFIG_MACH_TRIZEPS3 +@@ -9193,9 +9497,9 @@ + # else + # define machine_arch_type MACH_TYPE_ZEUSEVB + # endif +-# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB) ++# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_ZEUSEVB) + #else +-# define machine_is_zeusevb() (0) ++# define machine_is_mxc91131evb() (0) + #endif + + #ifdef CONFIG_MACH_P700 +@@ -9402,6 +9706,3667 @@ + # define machine_is_mp2usb() (0) + #endif + ++#ifdef CONFIG_MACH_NTNP425C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NTNP425C ++# endif ++# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) ++#else ++# define machine_is_ntnp425c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COLIBRI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COLIBRI ++# endif ++# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) ++#else ++# define machine_is_colibri() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PCM7220 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PCM7220 ++# endif ++# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) ++#else ++# define machine_is_pcm7220() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GATEWAY7001 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GATEWAY7001 ++# endif ++# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) ++#else ++# define machine_is_gateway7001() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PCM027 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PCM027 ++# endif ++# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) ++#else ++# define machine_is_pcm027() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CMPXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CMPXA ++# endif ++# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) ++#else ++# define machine_is_cmpxa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ANUBIS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ANUBIS ++# endif ++# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) ++#else ++# define machine_is_anubis() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ITE8152 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ITE8152 ++# endif ++# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) ++#else ++# define machine_is_ite8152() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LPC3XXX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LPC3XXX ++# endif ++# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) ++#else ++# define machine_is_lpc3xxx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PUPPETEER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PUPPETEER ++# endif ++# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) ++#else ++# define machine_is_puppeteer() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MACH_VADATECH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MACH_VADATECH ++# endif ++# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) ++#else ++# define machine_is_vt001() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E570 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E570 ++# endif ++# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) ++#else ++# define machine_is_e570() (0) ++#endif ++ ++#ifdef CONFIG_MACH_X50 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_X50 ++# endif ++# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) ++#else ++# define machine_is_x50() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RECON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RECON ++# endif ++# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) ++#else ++# define machine_is_recon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XBOARDGP8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XBOARDGP8 ++# endif ++# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) ++#else ++# define machine_is_xboardgp8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FPIC2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FPIC2 ++# endif ++# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) ++#else ++# define machine_is_fpic2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AKITA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AKITA ++# endif ++# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) ++#else ++# define machine_is_akita() (0) ++#endif ++ ++#ifdef CONFIG_MACH_A81 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_A81 ++# endif ++# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) ++#else ++# define machine_is_a81() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SVM_SC25X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SVM_SC25X ++# endif ++# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) ++#else ++# define machine_is_svm_sc25x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VADATECH020 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VADATECH020 ++# endif ++# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) ++#else ++# define machine_is_vt020() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TLI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TLI ++# endif ++# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) ++#else ++# define machine_is_tli() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDB9315LC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDB9315LC ++# endif ++# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) ++#else ++# define machine_is_edb9315lc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PASSEC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PASSEC ++# endif ++# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) ++#else ++# define machine_is_passec() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS_TIGER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS_TIGER ++# endif ++# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) ++#else ++# define machine_is_ds_tiger() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E310 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E310 ++# endif ++# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) ++#else ++# define machine_is_e310() (0) ++#endif ++ ++#ifdef CONFIG_MACH_E330 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_E330 ++# endif ++# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) ++#else ++# define machine_is_e330() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RT3000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RT3000 ++# endif ++# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) ++#else ++# define machine_is_rt3000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NOKIA770 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NOKIA770 ++# endif ++# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) ++#else ++# define machine_is_nokia770() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX0106 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX0106 ++# endif ++# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) ++#else ++# define machine_is_pnx0106() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HX21XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HX21XX ++# endif ++# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) ++#else ++# define machine_is_hx21xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FARADAY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FARADAY ++# endif ++# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) ++#else ++# define machine_is_faraday() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SBC9312 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SBC9312 ++# endif ++# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) ++#else ++# define machine_is_sbc9312() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BATMAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BATMAN ++# endif ++# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) ++#else ++# define machine_is_batman() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JPD201 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JPD201 ++# endif ++# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) ++#else ++# define machine_is_jpd201() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MIPSA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MIPSA ++# endif ++# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) ++#else ++# define machine_is_mipsa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_KACOM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_KACOM ++# endif ++# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) ++#else ++# define machine_is_kacom() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SWARCOCPU ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SWARCOCPU ++# endif ++# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) ++#else ++# define machine_is_swarcocpu() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SWARCODSL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SWARCODSL ++# endif ++# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) ++#else ++# define machine_is_swarcodsl() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BLUEANGEL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BLUEANGEL ++# endif ++# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) ++#else ++# define machine_is_blueangel() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HAIRYGRAMA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HAIRYGRAMA ++# endif ++# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) ++#else ++# define machine_is_hairygrama() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BANFF ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BANFF ++# endif ++# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) ++#else ++# define machine_is_banff() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CARMEVA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CARMEVA ++# endif ++# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) ++#else ++# define machine_is_carmeva() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAM255 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAM255 ++# endif ++# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) ++#else ++# define machine_is_sam255() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PPM10 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PPM10 ++# endif ++# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) ++#else ++# define machine_is_ppm10() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDB9315A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDB9315A ++# endif ++# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) ++#else ++# define machine_is_edb9315a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SUNSET ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SUNSET ++# endif ++# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) ++#else ++# define machine_is_sunset() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STARGATE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STARGATE2 ++# endif ++# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) ++#else ++# define machine_is_stargate2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_INTELMOTE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_INTELMOTE2 ++# endif ++# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) ++#else ++# define machine_is_intelmote2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TRIZEPS4 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TRIZEPS4 ++# endif ++# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) ++#else ++# define machine_is_trizeps4() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAINSTONE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAINSTONE2 ++# endif ++# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) ++#else ++# define machine_is_mainstone2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZ_IXP42X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZ_IXP42X ++# endif ++# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) ++#else ++# define machine_is_ez_ixp42x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TAPWAVE_ZODIAC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC ++# endif ++# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) ++#else ++# define machine_is_tapwave_zodiac() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UNIVERSALMETER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UNIVERSALMETER ++# endif ++# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) ++#else ++# define machine_is_universalmeter() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HICOARM9 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HICOARM9 ++# endif ++# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) ++#else ++# define machine_is_hicoarm9() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX4008 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX4008 ++# endif ++# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) ++#else ++# define machine_is_pnx4008() (0) ++#endif ++ ++#ifdef CONFIG_MACH_KWS6000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_KWS6000 ++# endif ++# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) ++#else ++# define machine_is_kws6000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PORTUX920T ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PORTUX920T ++# endif ++# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) ++#else ++# define machine_is_portux920t() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZ_X5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZ_X5 ++# endif ++# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) ++#else ++# define machine_is_ez_x5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_RUDOLPH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH ++# endif ++# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) ++#else ++# define machine_is_omap_rudolph() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CPUAT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CPUAT91 ++# endif ++# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) ++#else ++# define machine_is_cpuat91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REA9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REA9200 ++# endif ++# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) ++#else ++# define machine_is_rea9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 ++# endif ++# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) ++#else ++# define machine_is_acts_pune_sa1110() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXP425 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXP425 ++# endif ++# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) ++#else ++# define machine_is_ixp425() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARGONPLUSODYSSEY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY ++# endif ++# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY) ++#else ++# define machine_is_i30030ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PERCH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PERCH ++# endif ++# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) ++#else ++# define machine_is_perch() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EIS05R1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EIS05R1 ++# endif ++# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) ++#else ++# define machine_is_eis05r1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PEPPERPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PEPPERPAD ++# endif ++# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) ++#else ++# define machine_is_pepperpad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SB3010 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SB3010 ++# endif ++# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) ++#else ++# define machine_is_sb3010() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RM9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RM9200 ++# endif ++# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) ++#else ++# define machine_is_rm9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DMA03 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DMA03 ++# endif ++# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) ++#else ++# define machine_is_dma03() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ROAD_S101 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ROAD_S101 ++# endif ++# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) ++#else ++# define machine_is_road_s101() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A ++# endif ++# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) ++#else ++# define machine_is_iq_nextgen_a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_B ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B ++# endif ++# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) ++#else ++# define machine_is_iq_nextgen_b() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C ++# endif ++# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) ++#else ++# define machine_is_iq_nextgen_c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D ++# endif ++# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) ++#else ++# define machine_is_iq_nextgen_d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ_NEXTGEN_E ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E ++# endif ++# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) ++#else ++# define machine_is_iq_nextgen_e() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MALLOW_AT91 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MALLOW_AT91 ++# endif ++# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) ++#else ++# define machine_is_mallow_at91() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CYBERTRACKER_I ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CYBERTRACKER_I ++# endif ++# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) ++#else ++# define machine_is_cybertracker_i() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GESBC931X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GESBC931X ++# endif ++# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) ++#else ++# define machine_is_gesbc931x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CENTIPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CENTIPAD ++# endif ++# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) ++#else ++# define machine_is_centipad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARMSOC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARMSOC ++# endif ++# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) ++#else ++# define machine_is_armsoc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SE4200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SE4200 ++# endif ++# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) ++#else ++# define machine_is_se4200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMS197A ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMS197A ++# endif ++# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) ++#else ++# define machine_is_ems197a() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MICRO9 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MICRO9 ++# endif ++# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) ++#else ++# define machine_is_micro9() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MICRO9L ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MICRO9L ++# endif ++# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) ++#else ++# define machine_is_micro9l() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UC5471DSP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UC5471DSP ++# endif ++# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) ++#else ++# define machine_is_uc5471dsp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SJ5471ENG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SJ5471ENG ++# endif ++# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) ++#else ++# define machine_is_sj5471eng() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CMPXA26X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CMPXA26X ++# endif ++# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) ++#else ++# define machine_is_none() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NC ++# endif ++# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC) ++#else ++# define machine_is_nc1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTE ++# endif ++# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) ++#else ++# define machine_is_omap_palmte() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AJAX52X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AJAX52X ++# endif ++# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) ++#else ++# define machine_is_ajax52x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIRIUSTAR ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIRIUSTAR ++# endif ++# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) ++#else ++# define machine_is_siriustar() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IODATA_HDLG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IODATA_HDLG ++# endif ++# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) ++#else ++# define machine_is_iodata_hdlg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91RM9200UTL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91RM9200UTL ++# endif ++# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) ++#else ++# define machine_is_at91rm9200utl() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BIOSAFE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BIOSAFE ++# endif ++# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) ++#else ++# define machine_is_biosafe() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MP1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MP1000 ++# endif ++# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) ++#else ++# define machine_is_mp1000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PARSY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PARSY ++# endif ++# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) ++#else ++# define machine_is_parsy() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CCXP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CCXP ++# endif ++# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) ++#else ++# define machine_is_ccxp270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_GSAMPLE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE ++# endif ++# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) ++#else ++# define machine_is_omap_gsample() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REALVIEW_EB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REALVIEW_EB ++# endif ++# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) ++#else ++# define machine_is_realview_eb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAMOA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAMOA ++# endif ++# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) ++#else ++# define machine_is_samoa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_T3XSCALE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_T3XSCALE ++# endif ++# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) ++#else ++# define machine_is_t3xscale() (0) ++#endif ++ ++#ifdef CONFIG_MACH_I878 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_I878 ++# endif ++# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) ++#else ++# define machine_is_i878() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BORZOI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BORZOI ++# endif ++# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) ++#else ++# define machine_is_borzoi() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GECKO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GECKO ++# endif ++# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) ++#else ++# define machine_is_gecko() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS101 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS101 ++# endif ++# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) ++#else ++# define machine_is_ds101() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTT2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 ++# endif ++# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) ++#else ++# define machine_is_omap_palmtt2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMLD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMLD ++# endif ++# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) ++#else ++# define machine_is_xscale_palmld() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CC9C ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CC9C ++# endif ++# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) ++#else ++# define machine_is_cc9c() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SBC1670 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SBC1670 ++# endif ++# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) ++#else ++# define machine_is_sbc1670() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXDP28X5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXDP28X5 ++# endif ++# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) ++#else ++# define machine_is_ixdp28x5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTT ++# endif ++# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) ++#else ++# define machine_is_omap_palmtt() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ML696K ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ML696K ++# endif ++# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) ++#else ++# define machine_is_ml696k() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARCOM_ZEUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARCOM_ZEUS ++# endif ++# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) ++#else ++# define machine_is_arcom_zeus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OSIRIS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OSIRIS ++# endif ++# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) ++#else ++# define machine_is_osiris() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAESTRO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAESTRO ++# endif ++# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) ++#else ++# define machine_is_maestro() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TUNGE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TUNGE2 ++# endif ++# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) ++#else ++# define machine_is_tunge2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXBBM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXBBM ++# endif ++# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) ++#else ++# define machine_is_ixbbm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX27 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX27 ++# endif ++# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) ++#else ++# define machine_is_mx27ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AX8004 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AX8004 ++# endif ++# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) ++#else ++# define machine_is_ax8004() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91SAM9261EK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91SAM9261EK ++# endif ++# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) ++#else ++# define machine_is_at91sam9261ek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LOFT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LOFT ++# endif ++# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) ++#else ++# define machine_is_loft() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAGPIE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAGPIE ++# endif ++# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) ++#else ++# define machine_is_magpie() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX21 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX21 ++# endif ++# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) ++#else ++# define machine_is_mx21ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MB87M3400 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MB87M3400 ++# endif ++# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) ++#else ++# define machine_is_mb87m3400() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MGUARD_DELTA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MGUARD_DELTA ++# endif ++# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) ++#else ++# define machine_is_mguard_delta() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DAVINCI_DVDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DAVINCI_DVDP ++# endif ++# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) ++#else ++# define machine_is_davinci_dvdp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCUNIVERSAL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCUNIVERSAL ++# endif ++# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) ++#else ++# define machine_is_htcuniversal() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TPAD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TPAD ++# endif ++# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) ++#else ++# define machine_is_tpad() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ROVERP3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ROVERP3 ++# endif ++# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) ++#else ++# define machine_is_roverp3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_JORNADA928 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_JORNADA928 ++# endif ++# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) ++#else ++# define machine_is_jornada928() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MV88FXX81 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MV88FXX81 ++# endif ++# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) ++#else ++# define machine_is_mv88fxx81() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STMP36XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STMP36XX ++# endif ++# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) ++#else ++# define machine_is_stmp36xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SXNI79524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SXNI79524 ++# endif ++# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) ++#else ++# define machine_is_sxni79524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AMS_DELTA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AMS_DELTA ++# endif ++# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) ++#else ++# define machine_is_ams_delta() (0) ++#endif ++ ++#ifdef CONFIG_MACH_URANIUM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_URANIUM ++# endif ++# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) ++#else ++# define machine_is_uranium() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UCON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UCON ++# endif ++# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) ++#else ++# define machine_is_ucon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NAS100D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NAS100D ++# endif ++# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) ++#else ++# define machine_is_nas100d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_L083_1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_L083_1000 ++# endif ++# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) ++#else ++# define machine_is_l083() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EZX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EZX ++# endif ++# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) ++#else ++# define machine_is_ezx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX5220 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX5220 ++# endif ++# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) ++#else ++# define machine_is_pnx5220() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BUTTE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BUTTE ++# endif ++# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) ++#else ++# define machine_is_butte() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SRM2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SRM2 ++# endif ++# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) ++#else ++# define machine_is_srm2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DSBR ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DSBR ++# endif ++# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) ++#else ++# define machine_is_dsbr() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CRYSTALBALL ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CRYSTALBALL ++# endif ++# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) ++#else ++# define machine_is_crystalball() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TINYPXA27X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TINYPXA27X ++# endif ++# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) ++#else ++# define machine_is_tinypxa27x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HERBIE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HERBIE ++# endif ++# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) ++#else ++# define machine_is_herbie() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAGICIAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAGICIAN ++# endif ++# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) ++#else ++# define machine_is_magician() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM4002 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM4002 ++# endif ++# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) ++#else ++# define machine_is_cm4002() (0) ++#endif ++ ++#ifdef CONFIG_MACH_B4 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_B4 ++# endif ++# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) ++#else ++# define machine_is_b4() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAUI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAUI ++# endif ++# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) ++#else ++# define machine_is_maui() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CYBERTRACKER_G ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CYBERTRACKER_G ++# endif ++# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) ++#else ++# define machine_is_cybertracker_g() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXDKN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXDKN ++# endif ++# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) ++#else ++# define machine_is_nxdkn() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MIO8390 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MIO8390 ++# endif ++# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) ++#else ++# define machine_is_mio8390() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMI_BOARD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMI_BOARD ++# endif ++# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) ++#else ++# define machine_is_omi_board() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX21CIV ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX21CIV ++# endif ++# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) ++#else ++# define machine_is_mx21civ() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MAHI_CDAC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MAHI_CDAC ++# endif ++# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) ++#else ++# define machine_is_mahi_cdac() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTX ++# endif ++# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) ++#else ++# define machine_is_xscale_palmtx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C2413 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C2413 ++# endif ++# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) ++#else ++# define machine_is_s3c2413() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SAMSYS_EP0 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SAMSYS_EP0 ++# endif ++# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) ++#else ++# define machine_is_samsys_ep0() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WG302V1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WG302V1 ++# endif ++# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) ++#else ++# define machine_is_wg302v1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WG302V2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WG302V2 ++# endif ++# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) ++#else ++# define machine_is_wg302v2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EB42X ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EB42X ++# endif ++# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) ++#else ++# define machine_is_eb42x() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IQ331ES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IQ331ES ++# endif ++# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) ++#else ++# define machine_is_iq331es() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COSYDSP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COSYDSP ++# endif ++# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) ++#else ++# define machine_is_cosydsp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_UPLAT7D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_UPLAT7D ++# endif ++# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) ++#else ++# define machine_is_uplat7d_proto() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PTDAVINCI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PTDAVINCI ++# endif ++# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) ++#else ++# define machine_is_ptdavinci() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MBUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MBUS ++# endif ++# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) ++#else ++# define machine_is_mbus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NADIA2VB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NADIA2VB ++# endif ++# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) ++#else ++# define machine_is_nadia2vb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_R1000 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_R1000 ++# endif ++# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) ++#else ++# define machine_is_r1000() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HW90250 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HW90250 ++# endif ++# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) ++#else ++# define machine_is_hw90250() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_2430SDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_2430SDP ++# endif ++# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) ++#else ++# define machine_is_omap_2430sdp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DAVINCI_EVM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DAVINCI_EVM ++# endif ++# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) ++#else ++# define machine_is_davinci_evm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_TORNADO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_TORNADO ++# endif ++# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) ++#else ++# define machine_is_omap_tornado() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OLOCREEK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OLOCREEK ++# endif ++# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) ++#else ++# define machine_is_olocreek() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PALMZ72 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PALMZ72 ++# endif ++# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) ++#else ++# define machine_is_palmz72() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXDB500 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXDB500 ++# endif ++# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) ++#else ++# define machine_is_nxdb500() (0) ++#endif ++ ++#ifdef CONFIG_MACH_APF9328 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_APF9328 ++# endif ++# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) ++#else ++# define machine_is_apf9328() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_WIPOQ ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_WIPOQ ++# endif ++# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) ++#else ++# define machine_is_omap_wipoq() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_TWIP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_TWIP ++# endif ++# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) ++#else ++# define machine_is_omap_twip() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTREO650 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 ++# endif ++# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) ++#else ++# define machine_is_xscale_treo650() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ACUMEN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ACUMEN ++# endif ++# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) ++#else ++# define machine_is_acumen() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XP100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XP100 ++# endif ++# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) ++#else ++# define machine_is_xp100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FS2410 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FS2410 ++# endif ++# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) ++#else ++# define machine_is_fs2410() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA270_CERF ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA270_CERF ++# endif ++# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) ++#else ++# define machine_is_pxa270_cerf() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SQ2FTLPALM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SQ2FTLPALM ++# endif ++# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) ++#else ++# define machine_is_sq2ftlpalm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BSEMSERVER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BSEMSERVER ++# endif ++# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) ++#else ++# define machine_is_bsemserver() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NETCLIENT ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NETCLIENT ++# endif ++# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) ++#else ++# define machine_is_netclient() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSCALE_PALMTT5 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 ++# endif ++# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) ++#else ++# define machine_is_xscale_palmtt5() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMTC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMTC ++# endif ++# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) ++#else ++# define machine_is_xscale_palmtc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_APOLLON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_APOLLON ++# endif ++# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) ++#else ++# define machine_is_omap_apollon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ARGONLVEVB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ARGONLVEVB ++# endif ++# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_ARGONLVEVB) ++#else ++# define machine_is_mxc30030evb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REA_2D ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REA_2D ++# endif ++# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) ++#else ++# define machine_is_rea_2d() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TI3E524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TI3E524 ++# endif ++# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) ++#else ++# define machine_is_eti3e524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ATEB9200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ATEB9200 ++# endif ++# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) ++#else ++# define machine_is_ateb9200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AUCKLAND ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AUCKLAND ++# endif ++# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) ++#else ++# define machine_is_auckland() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AK3320M ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AK3320M ++# endif ++# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) ++#else ++# define machine_is_ak3220m() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DURAMAX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DURAMAX ++# endif ++# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) ++#else ++# define machine_is_duramax() (0) ++#endif ++ ++#ifdef CONFIG_MACH_N35 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_N35 ++# endif ++# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) ++#else ++# define machine_is_n35() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PRONGHORN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PRONGHORN ++# endif ++# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) ++#else ++# define machine_is_pronghorn() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FUNDY ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FUNDY ++# endif ++# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) ++#else ++# define machine_is_fundy() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LOGICPD_PXA270 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 ++# endif ++# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) ++#else ++# define machine_is_logicpd_pxa270() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CPU777 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CPU777 ++# endif ++# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) ++#else ++# define machine_is_cpu777() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SIMICON9201 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SIMICON9201 ++# endif ++# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) ++#else ++# define machine_is_simicon9201() (0) ++#endif ++ ++#ifdef CONFIG_MACH_LEAP2_HPM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_LEAP2_HPM ++# endif ++# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) ++#else ++# define machine_is_leap2_hpm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CM922TXA10 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CM922TXA10 ++# endif ++# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) ++#else ++# define machine_is_cm922txa10() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA ++# endif ++# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) ++#else ++# define machine_is_sandgate() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2 ++# endif ++# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) ++#else ++# define machine_is_sandgate2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2G ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2G ++# endif ++# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) ++#else ++# define machine_is_sandgate2g() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SANDGATE2P ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SANDGATE2P ++# endif ++# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) ++#else ++# define machine_is_sandgate2p() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FRED_JACK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FRED_JACK ++# endif ++# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) ++#else ++# define machine_is_fred_jack() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TTG_COLOR1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TTG_COLOR1 ++# endif ++# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) ++#else ++# define machine_is_ttg_color1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NXEB500HMI ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NXEB500HMI ++# endif ++# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) ++#else ++# define machine_is_nxeb500hmi() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NETDCU8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NETDCU8 ++# endif ++# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) ++#else ++# define machine_is_netdcu8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ML675050_CPU_BOA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA ++# endif ++# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) ++#else ++# define machine_is_ml675050_cpu_boa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NG_FVX538 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NG_FVX538 ++# endif ++# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) ++#else ++# define machine_is_ng_fvx538() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NG_FVS338 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NG_FVS338 ++# endif ++# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) ++#else ++# define machine_is_ng_fvs338() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PNX4103 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PNX4103 ++# endif ++# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) ++#else ++# define machine_is_pnx4103() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HESDB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HESDB ++# endif ++# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) ++#else ++# define machine_is_hesdb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_XSILO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_XSILO ++# endif ++# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) ++#else ++# define machine_is_xsilo() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ESPRESSO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ESPRESSO ++# endif ++# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) ++#else ++# define machine_is_espresso() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMLC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMLC ++# endif ++# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) ++#else ++# define machine_is_emlc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SISTERON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SISTERON ++# endif ++# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) ++#else ++# define machine_is_sisteron() (0) ++#endif ++ ++#ifdef CONFIG_MACH_RX1950 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_RX1950 ++# endif ++# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) ++#else ++# define machine_is_rx1950() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TSC_VENUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TSC_VENUS ++# endif ++# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) ++#else ++# define machine_is_tsc_venus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DS101J ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DS101J ++# endif ++# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) ++#else ++# define machine_is_ds101j() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MXC30030ADS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MXC30030ADS ++# endif ++# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) ++#else ++# define machine_is_mxc30030ads() (0) ++#endif ++ ++#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC ++# endif ++# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) ++#else ++# define machine_is_fujitsu_wimaxsoc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DUALPCMODEM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DUALPCMODEM ++# endif ++# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) ++#else ++# define machine_is_dualpcmodem() (0) ++#endif ++ ++#ifdef CONFIG_MACH_GESBC9312 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_GESBC9312 ++# endif ++# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) ++#else ++# define machine_is_gesbc9312() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCAPACHE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCAPACHE ++# endif ++# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE) ++#else ++# define machine_is_htcapache() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXDP435 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXDP435 ++# endif ++# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435) ++#else ++# define machine_is_ixdp435() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CATPROVT100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CATPROVT100 ++# endif ++# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100) ++#else ++# define machine_is_catprovt100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PICOTUX1XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PICOTUX1XX ++# endif ++# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX) ++#else ++# define machine_is_picotux1xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PICOTUX2XX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PICOTUX2XX ++# endif ++# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX) ++#else ++# define machine_is_picotux2xx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DSMG600 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DSMG600 ++# endif ++# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600) ++#else ++# define machine_is_dsmg600() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EMPC2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EMPC2 ++# endif ++# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2) ++#else ++# define machine_is_empc2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VENTURA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VENTURA ++# endif ++# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA) ++#else ++# define machine_is_ventura() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PHIDGET_SBC ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PHIDGET_SBC ++# endif ++# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC) ++#else ++# define machine_is_phidget_sbc() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IJ3K ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IJ3K ++# endif ++# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K) ++#else ++# define machine_is_ij3k() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PISGAH ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PISGAH ++# endif ++# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH) ++#else ++# define machine_is_pisgah() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_FSAMPLE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE ++# endif ++# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE) ++#else ++# define machine_is_omap_fsample() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SG720 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SG720 ++# endif ++# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720) ++#else ++# define machine_is_sg720() (0) ++#endif ++ ++#ifdef CONFIG_MACH_REDFOX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_REDFOX ++# endif ++# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX) ++#else ++# define machine_is_redfox() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MYSH_EP9315_1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MYSH_EP9315_1 ++# endif ++# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1) ++#else ++# define machine_is_mysh_ep9315_1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TPF106 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TPF106 ++# endif ++# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106) ++#else ++# define machine_is_tpf106() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AT91RM9200KG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AT91RM9200KG ++# endif ++# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG) ++#else ++# define machine_is_at91rm9200kg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SLEDB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SLEDB ++# endif ++# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB) ++#else ++# define machine_is_racemt2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ONTRACK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ONTRACK ++# endif ++# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK) ++#else ++# define machine_is_ontrack() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PM1200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PM1200 ++# endif ++# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200) ++#else ++# define machine_is_pm1200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ESS24XXX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ESS24XXX ++# endif ++# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX) ++#else ++# define machine_is_ess24562() (0) ++#endif ++ ++#ifdef CONFIG_MACH_COREMP7 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_COREMP7 ++# endif ++# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7) ++#else ++# define machine_is_coremp7() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NEXCODER_6446 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NEXCODER_6446 ++# endif ++# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446) ++#else ++# define machine_is_nexcoder_6446() (0) ++#endif ++ ++#ifdef CONFIG_MACH_STVC8380 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_STVC8380 ++# endif ++# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380) ++#else ++# define machine_is_stvc8380() (0) ++#endif ++ ++#ifdef CONFIG_MACH_TEKLYNX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_TEKLYNX ++# endif ++# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX) ++#else ++# define machine_is_teklynx() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CARBONADO ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CARBONADO ++# endif ++# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO) ++#else ++# define machine_is_carbonado() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SYSMOS_MP730 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SYSMOS_MP730 ++# endif ++# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730) ++#else ++# define machine_is_sysmos_mp730() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SNAPPER_CL15 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SNAPPER_CL15 ++# endif ++# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15) ++#else ++# define machine_is_snapper_cl15() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PGIGIM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PGIGIM ++# endif ++# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM) ++#else ++# define machine_is_pgigim() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PTX9160P2 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PTX9160P2 ++# endif ++# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2) ++#else ++# define machine_is_ptx9160p2() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DCORE1 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DCORE1 ++# endif ++# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1) ++#else ++# define machine_is_dcore1() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VICTORPXA ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VICTORPXA ++# endif ++# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA) ++#else ++# define machine_is_victorpxa() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MX2DTB ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MX2DTB ++# endif ++# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB) ++#else ++# define machine_is_mx2dtb() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PXA_IREX_ER0100 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100 ++# endif ++# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100) ++#else ++# define machine_is_pxa_irex_er0100() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_PALMZ71 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_PALMZ71 ++# endif ++# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71) ++#else ++# define machine_is_omap_palmz71() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BARTEC_DEG ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BARTEC_DEG ++# endif ++# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG) ++#else ++# define machine_is_bartec_deg() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HW50251 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HW50251 ++# endif ++# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251) ++#else ++# define machine_is_hw50251() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IBOX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IBOX ++# endif ++# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX) ++#else ++# define machine_is_ibox() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ATLASLH7A404 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ATLASLH7A404 ++# endif ++# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404) ++#else ++# define machine_is_atlaslh7a404() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PT2026 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PT2026 ++# endif ++# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026) ++#else ++# define machine_is_pt2026() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCALPINE ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCALPINE ++# endif ++# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE) ++#else ++# define machine_is_htcalpine() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BARTEC_VTU ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BARTEC_VTU ++# endif ++# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU) ++#else ++# define machine_is_bartec_vtu() (0) ++#endif ++ ++#ifdef CONFIG_MACH_VCOREII ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_VCOREII ++# endif ++# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII) ++#else ++# define machine_is_vcoreii() (0) ++#endif ++ ++#ifdef CONFIG_MACH_PDNB3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_PDNB3 ++# endif ++# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3) ++#else ++# define machine_is_pdnb3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HTCBEETLES ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HTCBEETLES ++# endif ++# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES) ++#else ++# define machine_is_htcbeetles() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C6400 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C6400 ++# endif ++# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400) ++#else ++# define machine_is_s3c6400() (0) ++#endif ++ ++#ifdef CONFIG_MACH_S3C2443 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_S3C2443 ++# endif ++# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443) ++#else ++# define machine_is_s3c2443() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OMAP_LDK ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OMAP_LDK ++# endif ++# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK) ++#else ++# define machine_is_omap_ldk() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2460 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2460 ++# endif ++# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460) ++#else ++# define machine_is_smdk2460() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2440 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2440 ++# endif ++# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440) ++#else ++# define machine_is_smdk2440() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2412 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2412 ++# endif ++# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412) ++#else ++# define machine_is_smdk2412() (0) ++#endif ++ ++#ifdef CONFIG_MACH_WEBBOX ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_WEBBOX ++# endif ++# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX) ++#else ++# define machine_is_webbox() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CWWNDP ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CWWNDP ++# endif ++# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP) ++#else ++# define machine_is_cwwndp() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DRAGON ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DRAGON ++# endif ++# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON) ++#else ++# define machine_is_dragon() (0) ++#endif ++ ++#ifdef CONFIG_MACH_OPENDO_CPU_BOARD ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD ++# endif ++# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD) ++#else ++# define machine_is_opendo_cpu_board() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CCM2200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CCM2200 ++# endif ++# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200) ++#else ++# define machine_is_ccm2200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_ETWARM ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_ETWARM ++# endif ++# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM) ++#else ++# define machine_is_etwarm() (0) ++#endif ++ ++#ifdef CONFIG_MACH_M93030 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_M93030 ++# endif ++# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030) ++#else ++# define machine_is_m93030() (0) ++#endif ++ ++#ifdef CONFIG_MACH_CC7U ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_CC7U ++# endif ++# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U) ++#else ++# define machine_is_cc7u() (0) ++#endif ++ ++#ifdef CONFIG_MACH_MTT_RANGER ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_MTT_RANGER ++# endif ++# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER) ++#else ++# define machine_is_mtt_ranger() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NEXUS ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NEXUS ++# endif ++# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS) ++#else ++# define machine_is_nexus() (0) ++#endif ++ ++#ifdef CONFIG_MACH_DESMAN ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_DESMAN ++# endif ++# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN) ++#else ++# define machine_is_desman() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BKDE303 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BKDE303 ++# endif ++# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303) ++#else ++# define machine_is_bkde303() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SMDK2413 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SMDK2413 ++# endif ++# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413) ++#else ++# define machine_is_smdk2413() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AML_M7200 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AML_M7200 ++# endif ++# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200) ++#else ++# define machine_is_aml_m7200() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AML_M5900 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AML_M5900 ++# endif ++# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900) ++#else ++# define machine_is_aml_m5900() (0) ++#endif ++ ++#ifdef CONFIG_MACH_SG640 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_SG640 ++# endif ++# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640) ++#else ++# define machine_is_sg640() (0) ++#endif ++ ++#ifdef CONFIG_MACH_EDG79524 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_EDG79524 ++# endif ++# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524) ++#else ++# define machine_is_edg79524() (0) ++#endif ++ ++#ifdef CONFIG_MACH_AI2410 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_AI2410 ++# endif ++# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410) ++#else ++# define machine_is_ai2410() (0) ++#endif ++ ++#ifdef CONFIG_MACH_IXP465 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_IXP465 ++# endif ++# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465) ++#else ++# define machine_is_ixp465() (0) ++#endif ++ ++#ifdef CONFIG_MACH_BALLOON3 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_BALLOON3 ++# endif ++# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) ++#else ++# define machine_is_balloon3() (0) ++#endif ++ ++#ifdef CONFIG_MACH_QT2410 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_QT2410 ++# endif ++# define machine_is_qt2410() (machine_arch_type == MACH_TYPE_QT2410) ++#else ++# define machine_is_qt2410() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NEO1973_GTA01 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NEO1973_GTA01 ++# endif ++# define machine_is_neo1973_gta01() (machine_arch_type == MACH_TYPE_NEO1973_GTA01) ++#else ++# define machine_is_neo1973_gta01() (0) ++#endif ++ ++#ifdef CONFIG_MACH_HXD8 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_HXD8 ++# endif ++# define machine_is_hxd8() (machine_arch_type == MACH_TYPE_HXD8) ++#else ++# define machine_is_neo8() (0) ++#endif ++ ++#ifdef CONFIG_MACH_NEO1973_GTA02 ++# ifdef machine_arch_type ++# undef machine_arch_type ++# define machine_arch_type __machine_arch_type ++# else ++# define machine_arch_type MACH_TYPE_NEO1973_GTA02 ++# endif ++# define machine_is_neo1973_gta02() (machine_arch_type == MACH_TYPE_NEO1973_GTA02) ++#else ++# define machine_is_neo1973_gta02() (0) ++#endif ++ ++ + /* + * These have not yet been registered + */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-mokoversion.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-mokoversion.patch new file mode 100644 index 0000000000..a44434155e --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-mokoversion.patch @@ -0,0 +1,10 @@ +Index: u-boot/tools/setlocalversion +=================================================================== +--- u-boot.orig/tools/setlocalversion 2007-03-26 14:42:58.000000000 +0200 ++++ u-boot/tools/setlocalversion 2007-03-26 14:46:47.000000000 +0200 +@@ -20,3 +20,5 @@ + printf '%s' -dirty + fi + fi ++ ++printf '%s' -moko9 diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-nand-markbad-reallybad.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-nand-markbad-reallybad.patch new file mode 100644 index 0000000000..d630889e3c --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-nand-markbad-reallybad.patch @@ -0,0 +1,20 @@ +This patch makes sure that the 'nand markbad' command does not only mark a block +'bad' in the bad-block table, but _also_ marks it bad in the OOB area. + +we need this to preserve the bad block status when re-creating the bad block table +at some later point. + +Signed-off-by: Harald Welte <laforge@openmoko.org> +Index: u-boot/drivers/nand/nand_base.c +=================================================================== +--- u-boot.orig/drivers/nand/nand_base.c 2007-03-01 12:47:31.000000000 +0100 ++++ u-boot/drivers/nand/nand_base.c 2007-03-01 12:48:08.000000000 +0100 +@@ -481,7 +481,7 @@ + + /* Do we have a flash based bad block table ? */ + if (this->options & NAND_USE_FLASH_BBT) +- return nand_update_bbt (mtd, ofs); ++ nand_update_bbt (mtd, ofs); + + /* We write two bytes, so we dont have to mess with 16 bit access */ + ofs += mtd->oobsize + (this->badblockpos & ~0x01); diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-defaultenv.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-defaultenv.patch new file mode 100644 index 0000000000..7e3aa4f480 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-defaultenv.patch @@ -0,0 +1,31 @@ +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h 2007-02-27 00:43:16.000000000 +0100 ++++ u-boot/include/configs/neo1973_gta01.h 2007-02-27 00:47:49.000000000 +0100 +@@ -115,8 +115,8 @@ + #include <cmd_confdefs.h> + + #define CONFIG_BOOTDELAY 3 +-#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8" +-#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x34000 0x200000; bootm 0x32000000" ++#define CONFIG_BOOTARGS "" ++#define CONFIG_BOOTCOMMAND "setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000" + + #define CONFIG_DOS_PARTITION 1 + +@@ -181,11 +181,14 @@ + #define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ + #define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" + #define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION +-#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" + #define CONFIG_USBD_DFU 1 + #define CONFIG_USBD_DFU_XFER_SIZE 4096 /* 0x4000 */ + #define CONFIG_USBD_DFU_INTERFACE 2 + ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "usbtty=cdc_acm\0" \ ++ "bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8\0" \ ++ "" + + /*----------------------------------------------------------------------- + * Physical Memory Map diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-resume.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-resume.patch new file mode 100644 index 0000000000..19d912620d --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-neo1973-resume.patch @@ -0,0 +1,113 @@ +Resume support for low-level uboot code, Version 5 + +Signed-off-by: Ben Dooks <ben-linux@fluff.org> + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S 2007-02-28 03:51:24.000000000 +0100 ++++ u-boot/cpu/arm920t/start.S 2007-03-01 02:43:47.000000000 +0100 +@@ -158,18 +158,68 @@ + str r1, [r0] + # endif + ++ /* default FCLK is 202 MHz ! */ ++#define LOCKTIME 0x4c000000 ++#define UPLLCON 0x4c000008 ++//#define MPLLCFG ((0x90 << 12) + (0x2 << 4) + 0x2) ++#define MPLLCFG ((0x90 << 12) + (0x7 << 4) + 0x0) ++#define UPLLCFG ((0x78 << 12) + (0x2 << 4) + 0x3) ++ ldr r0, =LOCKTIME ++ mov r1, #0xffffff ++ str r1, [r0] ++ ++ ldr r0, =UPLLCON ++ ldr r1, =UPLLCFG ++ str r1, [r0] ++ ++ /* Page 7-19, seven nops between UPLL and MPLL */ ++ nop ++ nop ++ nop ++ nop ++ nop ++ nop ++ nop ++ ++ ldr r1, =MPLLCFG ++ str r1, [r0, #-4] /* MPLLCON */ ++ + /* FCLK:HCLK:PCLK = 1:2:4 */ +- /* default FCLK is 120 MHz ! */ + ldr r0, =CLKDIVN + mov r1, #3 + str r1, [r0] ++ ++#if 1 ++ /* enable uart */ ++ ldr r0, =0x4c00000c /* clkcon */ ++ ldr r1, =0x7fff0 /* all clocks on */ ++ str r1, [r0] ++ ++ /* gpio UART0 init */ ++ ldr r0, =0x56000070 ++ mov r1, #0xaa ++ str r1, [r0] ++ ++ /* init uart */ ++ ldr r0, =0x50000000 ++ mov r1, #0x03 ++ str r1, [r0] ++ ldr r1, =0x245 ++ str r1, [r0, #0x04] ++ mov r1, #0x01 ++ str r1, [r0, #0x08] ++ mov r1, #0x00 ++ str r1, [r0, #0x0c] ++ mov r1, #0x1a ++ str r1, [r0, #0x28] ++#endif ++ + #endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ + + #ifndef CONFIG_SKIP_LOWLEVEL_INIT + #ifndef CONFIG_LL_INIT_NAND_ONLY + bl cpu_init_crit + #endif +-#endif + + #ifndef CONFIG_SKIP_RELOCATE_UBOOT + adr r0, _start /* r0 <- current position of code */ +@@ -202,9 +252,33 @@ + + #ifdef CONFIG_S3C2410_NAND_BOOT + nand_load: ++ /* take sdram out of power down */ ++ ldr r0, =0x56000080 /* misccr */ ++ ldr r1, [ r0 ] ++ bic r1, r1, #(S3C2410_MISCCR_nEN_SCLK0 | S3C2410_MISCCR_nEN_SCLK1 | S3C2410_MISCCR_nEN_SCLKE) ++ str r1, [ r0 ] ++ ++ /* ensure signals stabalise */ ++ mov r1, #128 ++1: subs r1, r1, #1 ++ bpl 1b ++ + #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY) + bl cpu_init_crit + #endif ++#if defined(CONFIG_S3C2410) ++ /* ensure some refresh has happened */ ++ ldr r1, =0xfffff ++1: subs r1, r1, #1 ++ bpl 1b ++ ++ /* test for resume */ ++ ldr r1, =0x560000B4 /* gstatus2 */ ++ ldr r0, [ r1 ] ++ tst r0, #0x02 /* is this resume from power down */ ++ ldrne pc, [r1, #4] /* gstatus3 */ ++#endif /* CONFIG_S3C2410 */ ++#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + + /* mov r10, lr */ + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-misccr-definitions.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-misccr-definitions.patch new file mode 100644 index 0000000000..6efe24651a --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-misccr-definitions.patch @@ -0,0 +1,45 @@ +Index: u-boot/include/s3c2410.h +=================================================================== +--- u-boot.orig/include/s3c2410.h ++++ u-boot/include/s3c2410.h +@@ -233,4 +233,40 @@ static inline S3C2410_SDI * S3C2410_GetB + rINTPND;\ + } + /* Wait until rINTPND is changed for the case that the ISR is very short. */ ++ ++#define S3C2410_MISCCR_USBDEV (0<<3) ++#define S3C2410_MISCCR_USBHOST (1<<3) ++ ++#define S3C2410_MISCCR_CLK0_MPLL (0<<4) ++#define S3C2410_MISCCR_CLK0_UPLL (1<<4) ++#define S3C2410_MISCCR_CLK0_FCLK (2<<4) ++#define S3C2410_MISCCR_CLK0_HCLK (3<<4) ++#define S3C2410_MISCCR_CLK0_PCLK (4<<4) ++#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) ++#define S3C2410_MISCCR_CLK0_MASK (7<<4) ++ ++#define S3C2410_MISCCR_CLK1_MPLL (0<<8) ++#define S3C2410_MISCCR_CLK1_UPLL (1<<8) ++#define S3C2410_MISCCR_CLK1_FCLK (2<<8) ++#define S3C2410_MISCCR_CLK1_HCLK (3<<8) ++#define S3C2410_MISCCR_CLK1_PCLK (4<<8) ++#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) ++#define S3C2410_MISCCR_CLK1_MASK (7<<8) ++ ++#define S3C2410_MISCCR_USBSUSPND0 (1<<12) ++#define S3C2410_MISCCR_USBSUSPND1 (1<<13) ++ ++#define S3C2410_MISCCR_nRSTCON (1<<16) ++ ++#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) ++#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) ++#define S3C2410_MISCCR_nEN_SCLKE (1<<19) ++#define S3C2410_MISCCR_SDSLEEP (7<<17) ++ ++#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) ++#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) ++#define S3C2410_CLKSLOW_SLOW (1<<4) ++#define S3C2410_CLKSLOW_SLOWVAL(x) (x) ++#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) ++ + #endif /*__S3C2410_H__*/ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-mmc.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-mmc.patch new file mode 100644 index 0000000000..b775beaa07 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-mmc.patch @@ -0,0 +1,818 @@ +This patch adds MMC/SD support to the S3C2410 SoC code in +u-boot + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/cpu/arm920t/s3c24x0/Makefile +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/Makefile ++++ u-boot/cpu/arm920t/s3c24x0/Makefile +@@ -26,7 +26,7 @@ + LIB = $(obj)lib$(SOC).a + + COBJS = i2c.o interrupts.o serial.o speed.o \ +- usb_ohci.o nand_read.o nand.o cmd_s3c2410.o ++ usb_ohci.o nand_read.o nand.o mmc.o cmd_s3c2410.o + + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +Index: u-boot/cpu/arm920t/s3c24x0/mmc.c +=================================================================== +--- /dev/null ++++ u-boot/cpu/arm920t/s3c24x0/mmc.c +@@ -0,0 +1,531 @@ ++/* ++ * u-boot S3C2410 MMC/SD card driver ++ * (C) Copyright 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c ++ * (C) 2005-2005 Thomas Kleffel ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <config.h> ++#include <common.h> ++#include <mmc.h> ++#include <asm/errno.h> ++#include <asm/io.h> ++#include <s3c2410.h> ++#include <part.h> ++#include <fat.h> ++ ++#ifdef CONFIG_MMC ++ ++#define CONFIG_MMC_WIDE ++ ++static S3C2410_SDI *sdi; ++ ++static block_dev_desc_t mmc_dev; ++ ++block_dev_desc_t * mmc_get_dev(int dev) ++{ ++ return ((block_dev_desc_t *)&mmc_dev); ++} ++ ++/* ++ * FIXME needs to read cid and csd info to determine block size ++ * and other parameters ++ */ ++static uchar mmc_buf[MMC_BLOCK_SIZE]; ++static mmc_csd_t mmc_csd; ++static int mmc_ready = 0; ++static int wide = 0; ++ ++ ++#define CMD_F_RESP 0x01 ++#define CMD_F_RESP_LONG 0x02 ++ ++static u_int32_t *mmc_cmd(ushort cmd, ulong arg, ushort flags) ++{ ++ static u_int32_t resp[5]; ++ ++ u_int32_t ccon, csta; ++ u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT; ++ ++ memset(resp, 0, sizeof(resp)); ++ ++ debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags); ++ ++ sdi->SDICSTA = 0xffffffff; ++ sdi->SDIDSTA = 0xffffffff; ++ sdi->SDIFSTA = 0xffffffff; ++ ++ sdi->SDICARG = arg; ++ ++ ccon = cmd & S3C2410_SDICMDCON_INDEX; ++ ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART; ++ ++ if (flags & CMD_F_RESP) { ++ ccon |= S3C2410_SDICMDCON_WAITRSP; ++ csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */ ++ } ++ ++ if (flags & CMD_F_RESP_LONG) ++ ccon |= S3C2410_SDICMDCON_LONGRSP; ++ ++ sdi->SDICCON = ccon; ++ ++ while (1) { ++ csta = sdi->SDICSTA; ++ if (csta & csta_rdy_bit) ++ break; ++ if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { ++ printf("===============> MMC CMD Timeout\n"); ++ sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT; ++ break; ++ } ++ } ++ ++ debug("final MMC CMD status 0x%x\n", csta); ++ ++ sdi->SDICSTA |= csta_rdy_bit; ++ ++ if (flags & CMD_F_RESP) { ++ resp[0] = sdi->SDIRSP0; ++ resp[1] = sdi->SDIRSP1; ++ resp[2] = sdi->SDIRSP2; ++ resp[3] = sdi->SDIRSP3; ++ } ++ ++ return resp; ++} ++ ++#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2) ++ ++static int mmc_block_read(uchar *dst, ulong src, ulong len) ++{ ++ u_int32_t dcon, fifo; ++ u_int32_t *dst_u32 = (u_int32_t *)dst; ++ u_int32_t *resp; ++ ++ if (len == 0) ++ return 0; ++ ++ debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len); ++ ++ /* set block len */ ++ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP); ++ sdi->SDIBSIZE = len; ++ ++ //sdi->SDIPRE = 0xff; ++ ++ /* setup data */ ++ dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM; ++ dcon |= S3C2410_SDIDCON_BLOCKMODE; ++ dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; ++ if (wide) ++ dcon |= S3C2410_SDIDCON_WIDEBUS; ++ sdi->SDIDCON = dcon; ++ ++ /* send read command */ ++ resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP); ++ ++ while (len > 0) { ++ u_int32_t sdidsta = sdi->SDIDSTA; ++ fifo = FIFO_FILL(sdi); ++ if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL| ++ S3C2410_SDIDSTA_CRCFAIL| ++ S3C2410_SDIDSTA_RXCRCFAIL| ++ S3C2410_SDIDSTA_DATATIMEOUT)) { ++ printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta); ++ return -EIO; ++ } ++ ++ while (fifo--) { ++ //debug("dst_u32 = 0x%08x\n", dst_u32); ++ *(dst_u32++) = sdi->SDIDAT; ++ if (len >= 4) ++ len -= 4; ++ else { ++ len = 0; ++ break; ++ } ++ } ++ } ++ ++ debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); ++ while (!(sdi->SDIDSTA & (1 << 4))) {} ++ debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA); ++ ++ sdi->SDIDCON = 0; ++ ++ if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH)) ++ debug("mmc_block_read; transfer not finished!\n"); ++ ++ return 0; ++} ++ ++static int mmc_block_write(ulong dst, uchar *src, int len) ++{ ++ printf("MMC block write not yet supported on S3C2410!\n"); ++ return -1; ++} ++ ++ ++int mmc_read(ulong src, uchar *dst, int size) ++{ ++ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; ++ ulong mmc_block_size, mmc_block_address; ++ ++ if (size == 0) ++ return 0; ++ ++ if (!mmc_ready) { ++ printf("Please initialize the MMC first\n"); ++ return -1; ++ } ++ ++ mmc_block_size = MMC_BLOCK_SIZE; ++ mmc_block_address = ~(mmc_block_size - 1); ++ ++ src -= CFG_MMC_BASE; ++ end = src + size; ++ part_start = ~mmc_block_address & src; ++ part_end = ~mmc_block_address & end; ++ aligned_start = mmc_block_address & src; ++ aligned_end = mmc_block_address & end; ++ ++ /* all block aligned accesses */ ++ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if (part_start) { ++ part_len = mmc_block_size - part_start; ++ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) ++ return -1; ++ ++ memcpy(dst, mmc_buf+part_start, part_len); ++ dst += part_len; ++ src += part_len; ++ } ++ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { ++ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) ++ return -1; ++ } ++ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if (part_end && src < end) { ++ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) ++ return -1; ++ ++ memcpy(dst, mmc_buf, part_end); ++ } ++ return 0; ++} ++ ++int mmc_write(uchar *src, ulong dst, int size) ++{ ++ ulong end, part_start, part_end, part_len, aligned_start, aligned_end; ++ ulong mmc_block_size, mmc_block_address; ++ ++ if (size == 0) ++ return 0; ++ ++ if (!mmc_ready) { ++ printf("Please initialize the MMC first\n"); ++ return -1; ++ } ++ ++ mmc_block_size = MMC_BLOCK_SIZE; ++ mmc_block_address = ~(mmc_block_size - 1); ++ ++ dst -= CFG_MMC_BASE; ++ end = dst + size; ++ part_start = ~mmc_block_address & dst; ++ part_end = ~mmc_block_address & end; ++ aligned_start = mmc_block_address & dst; ++ aligned_end = mmc_block_address & end; ++ ++ /* all block aligned accesses */ ++ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if (part_start) { ++ part_len = mmc_block_size - part_start; ++ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end); ++ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) ++ return -1; ++ ++ memcpy(mmc_buf+part_start, src, part_len); ++ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) ++ return -1; ++ ++ dst += part_len; ++ src += part_len; ++ } ++ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { ++ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) ++ return -1; ++ ++ } ++ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if (part_end && dst < end) { ++ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", ++ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end); ++ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) ++ return -1; ++ ++ memcpy(mmc_buf, src, part_end); ++ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) ++ return -1; ++ ++ } ++ return 0; ++} ++ ++ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, void *dst) ++{ ++ int mmc_block_size = MMC_BLOCK_SIZE; ++ ulong src = blknr * mmc_block_size + CFG_MMC_BASE; ++ ++ mmc_read(src, dst, blkcnt*mmc_block_size); ++ return blkcnt; ++} ++ ++/* MMC_DEFAULT_RCA should probably be just 1, but this may break other code ++ that expects it to be shifted. */ ++static u_int16_t rca = MMC_DEFAULT_RCA >> 16; ++ ++static u_int32_t mmc_size(const struct mmc_csd *csd) ++{ ++ u_int32_t block_len, mult, blocknr; ++ ++ block_len = csd->read_bl_len << 12; ++ mult = csd->c_size_mult1 << 8; ++ blocknr = (csd->c_size+1) * mult; ++ ++ return blocknr * block_len; ++} ++ ++struct sd_cid { ++ char pnm_0; /* product name */ ++ char oid_1; /* OEM/application ID */ ++ char oid_0; ++ uint8_t mid; /* manufacturer ID */ ++ char pnm_4; ++ char pnm_3; ++ char pnm_2; ++ char pnm_1; ++ uint8_t psn_2; /* product serial number */ ++ uint8_t psn_1; ++ uint8_t psn_0; /* MSB */ ++ uint8_t prv; /* product revision */ ++ uint8_t crc; /* CRC7 checksum, b0 is unused and set to 1 */ ++ uint8_t mdt_1; /* manufacturing date, LSB, RRRRyyyy yyyymmmm */ ++ uint8_t mdt_0; /* MSB */ ++ uint8_t psn_3; /* LSB */ ++}; ++ ++static void print_mmc_cid(mmc_cid_t *cid) ++{ ++ printf("MMC found. Card desciption is:\n"); ++ printf("Manufacturer ID = %02x%02x%02x\n", ++ cid->id[0], cid->id[1], cid->id[2]); ++ printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev); ++ cid->hwrev = cid->fwrev = 0; /* null terminate string */ ++ printf("Product Name = %s\n",cid->name); ++ printf("Serial Number = %02x%02x%02x\n", ++ cid->sn[0], cid->sn[1], cid->sn[2]); ++ printf("Month = %d\n",cid->month); ++ printf("Year = %d\n",1997 + cid->year); ++} ++ ++static void print_sd_cid(const struct sd_cid *cid) ++{ ++ printf("Manufacturer: 0x%02x, OEM \"%c%c\"\n", ++ cid->mid, cid->oid_0, cid->oid_1); ++ printf("Product name: \"%c%c%c%c%c\", revision %d.%d\n", ++ cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, cid->pnm_4, ++ cid->prv >> 4, cid->prv & 15); ++ printf("Serial number: %u\n", ++ cid->psn_0 << 24 | cid->psn_1 << 16 | cid->psn_2 << 8 | ++ cid->psn_3); ++ printf("Manufacturing date: %d/%d\n", ++ cid->mdt_1 & 15, ++ 2000+((cid->mdt_0 & 15) << 4)+((cid->mdt_1 & 0xf0) >> 4)); ++ printf("CRC: 0x%02x, b0 = %d\n", ++ cid->crc >> 1, cid->crc & 1); ++} ++ ++int mmc_init(int verbose) ++{ ++ int retries, rc = -ENODEV; ++ int is_sd = 0; ++ u_int32_t *resp; ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ ++ sdi = S3C2410_GetBase_SDI(); ++ ++ debug("mmc_init(PCLK=%u)\n", get_PCLK()); ++ ++ clk_power->CLKCON |= (1 << 9); ++ ++ /* S3C2410 has some bug that prevents reliable operation at higher speed */ ++ //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ ++ sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ ++ sdi->SDIBSIZE = 512; ++ sdi->SDIDTIMER = 0xffff; ++ sdi->SDIIMSK = 0x0; ++ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; ++ udelay(125000); /* FIXME: 74 SDCLK cycles */ ++ ++ mmc_csd.c_size = 0; ++ ++ /* reset */ ++ retries = 10; ++ resp = mmc_cmd(MMC_CMD_RESET, 0, 0); ++ ++ printf("trying to detect SD Card...\n"); ++ while (retries--) { ++ udelay(100000); ++ resp = mmc_cmd(55, 0x00000000, CMD_F_RESP); ++ resp = mmc_cmd(41, 0x00300000, CMD_F_RESP); ++ ++ if (resp[0] & (1 << 31)) { ++ is_sd = 1; ++ break; ++ } ++ } ++ ++ if (retries == 0 && !is_sd) { ++ retries = 10; ++ printf("failed to detect SD Card, trying MMC\n"); ++ resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP); ++ while (retries-- && resp && !(resp[4] & 0x80)) { ++ debug("resp %x %x\n", resp[0], resp[1]); ++ udelay(50); ++ resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP); ++ } ++ } ++ ++ /* try to get card id */ ++ resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG); ++ if (resp) { ++ if (!is_sd) { ++ /* TODO configure mmc driver depending on card ++ attributes */ ++ mmc_cid_t *cid = (mmc_cid_t *)resp; ++ ++ if (verbose) ++ print_mmc_cid(cid); ++ sprintf((char *) mmc_dev.vendor, ++ "Man %02x%02x%02x Snr %02x%02x%02x", ++ cid->id[0], cid->id[1], cid->id[2], ++ cid->sn[0], cid->sn[1], cid->sn[2]); ++ sprintf((char *) mmc_dev.product,"%s",cid->name); ++ sprintf((char *) mmc_dev.revision,"%x %x", ++ cid->hwrev, cid->fwrev); ++ } ++ else { ++ struct sd_cid *cid = (struct sd_cid *) resp; ++ ++ if (verbose) ++ print_sd_cid(cid); ++ sprintf((char *) mmc_dev.vendor, ++ "Man %02 OEM %c%c \"%c%c%c%c%c\"", ++ cid->mid, cid->oid_0, cid->oid_1, ++ cid->pnm_0, cid->pnm_1, cid->pnm_2, cid->pnm_3, ++ cid->pnm_4); ++ sprintf((char *) mmc_dev.product, "%d", ++ cid->psn_0 << 24 | cid->psn_1 << 16 | ++ cid->psn_2 << 8 | cid->psn_3); ++ sprintf((char *) mmc_dev.revision, "%d.%d", ++ cid->prv >> 4, cid->prv & 15); ++ } ++ ++ /* fill in device description */ ++ mmc_dev.if_type = IF_TYPE_MMC; ++ mmc_dev.part_type = PART_TYPE_DOS; ++ mmc_dev.dev = 0; ++ mmc_dev.lun = 0; ++ mmc_dev.type = 0; ++ /* FIXME fill in the correct size (is set to 32MByte) */ ++ mmc_dev.blksz = 512; ++ mmc_dev.lba = 0x10000; ++ mmc_dev.removable = 0; ++ mmc_dev.block_read = mmc_bread; ++ ++ /* MMC exists, get CSD too */ ++ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP); ++ if (is_sd) ++ rca = resp[0] >> 16; ++ ++ resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG); ++ if (resp) { ++ mmc_csd_t *csd = (mmc_csd_t *)resp; ++ memcpy(&mmc_csd, csd, sizeof(csd)); ++ rc = 0; ++ mmc_ready = 1; ++ /* FIXME add verbose printout for csd */ ++ printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n", ++ csd->read_bl_len, csd->c_size_mult1, csd->c_size); ++ printf("size = %u\n", mmc_size(csd)); ++ } ++ } ++ ++ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP); ++ ++#ifdef CONFIG_MMC_WIDE ++ if (is_sd) { ++ resp = mmc_cmd(55, rca<<16, CMD_F_RESP); ++ resp = mmc_cmd(6, 0x02, CMD_F_RESP); ++ wide = 1; ++ } ++#endif ++ ++ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */ ++ ++ return rc; ++} ++ ++int ++mmc_ident(block_dev_desc_t *dev) ++{ ++ return 0; ++} ++ ++int ++mmc2info(ulong addr) ++{ ++ /* FIXME hard codes to 32 MB device */ ++ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) ++ return 1; ++ ++ return 0; ++} ++ ++#endif /* CONFIG_MMC */ +Index: u-boot/include/asm-arm/arch-s3c24x0/mmc.h +=================================================================== +--- /dev/null ++++ u-boot/include/asm-arm/arch-s3c24x0/mmc.h +@@ -0,0 +1,112 @@ ++/* ++ * linux/drivers/mmc/mmc_pxa.h ++ * ++ * Author: Vladimir Shebordaev, Igor Oblakov ++ * Copyright: MontaVista Software Inc. ++ * ++ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++#ifndef __MMC_PXA_P_H__ ++#define __MMC_PXA_P_H__ ++ ++#include <asm/arch/regs-sdi.h> ++ ++#define MMC_DEFAULT_RCA (1<<16) ++ ++#define MMC_BLOCK_SIZE 512 ++#define MMC_CMD_RESET 0 ++#define MMC_CMD_SEND_OP_COND 1 ++#define MMC_CMD_ALL_SEND_CID 2 ++#define MMC_CMD_SET_RCA 3 ++#define MMC_CMD_SELECT_CARD 7 ++#define MMC_CMD_SEND_CSD 9 ++#define MMC_CMD_SEND_CID 10 ++#define MMC_CMD_SEND_STATUS 13 ++#define MMC_CMD_SET_BLOCKLEN 16 ++#define MMC_CMD_READ_BLOCK 17 ++#define MMC_CMD_RD_BLK_MULTI 18 ++#define MMC_CMD_WRITE_BLOCK 24 ++ ++#define MMC_MAX_BLOCK_SIZE 512 ++ ++#define MMC_R1_IDLE_STATE 0x01 ++#define MMC_R1_ERASE_STATE 0x02 ++#define MMC_R1_ILLEGAL_CMD 0x04 ++#define MMC_R1_COM_CRC_ERR 0x08 ++#define MMC_R1_ERASE_SEQ_ERR 0x01 ++#define MMC_R1_ADDR_ERR 0x02 ++#define MMC_R1_PARAM_ERR 0x04 ++ ++#define MMC_R1B_WP_ERASE_SKIP 0x0002 ++#define MMC_R1B_ERR 0x0004 ++#define MMC_R1B_CC_ERR 0x0008 ++#define MMC_R1B_CARD_ECC_ERR 0x0010 ++#define MMC_R1B_WP_VIOLATION 0x0020 ++#define MMC_R1B_ERASE_PARAM 0x0040 ++#define MMC_R1B_OOR 0x0080 ++#define MMC_R1B_IDLE_STATE 0x0100 ++#define MMC_R1B_ERASE_RESET 0x0200 ++#define MMC_R1B_ILLEGAL_CMD 0x0400 ++#define MMC_R1B_COM_CRC_ERR 0x0800 ++#define MMC_R1B_ERASE_SEQ_ERR 0x1000 ++#define MMC_R1B_ADDR_ERR 0x2000 ++#define MMC_R1B_PARAM_ERR 0x4000 ++ ++typedef struct mmc_cid ++{ ++ /* FIXME: BYTE_ORDER */ ++ uchar year:4, ++ month:4; ++ uchar sn[3]; ++ uchar fwrev:4, ++ hwrev:4; ++ uchar name[6]; ++ uchar id[3]; ++} mmc_cid_t; ++ ++typedef struct mmc_csd ++{ ++ uchar ecc:2, ++ file_format:2, ++ tmp_write_protect:1, ++ perm_write_protect:1, ++ copy:1, ++ file_format_grp:1; ++ uint64_t content_prot_app:1, ++ rsvd3:4, ++ write_bl_partial:1, ++ write_bl_len:4, ++ r2w_factor:3, ++ default_ecc:2, ++ wp_grp_enable:1, ++ wp_grp_size:5, ++ erase_grp_mult:5, ++ erase_grp_size:5, ++ c_size_mult1:3, ++ vdd_w_curr_max:3, ++ vdd_w_curr_min:3, ++ vdd_r_curr_max:3, ++ vdd_r_curr_min:3, ++ c_size:12, ++ rsvd2:2, ++ dsr_imp:1, ++ read_blk_misalign:1, ++ write_blk_misalign:1, ++ read_bl_partial:1; ++ ++ ushort read_bl_len:4, ++ ccc:12; ++ uchar tran_speed; ++ uchar nsac; ++ uchar taac; ++ uchar rsvd1:2, ++ spec_vers:4, ++ csd_structure:2; ++} mmc_csd_t; ++ ++ ++#endif /* __MMC_PXA_P_H__ */ +Index: u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h +=================================================================== +--- /dev/null ++++ u-boot/include/asm-arm/arch-s3c24x0/regs-sdi.h +@@ -0,0 +1,110 @@ ++/* linux/include/asm/arch-s3c2410/regs-sdi.h ++ * ++ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk> ++ * http://www.simtec.co.uk/products/SWLINUX/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * S3C2410 MMC/SDIO register definitions ++ * ++ * Changelog: ++ * 18-Aug-2004 Ben Dooks Created initial file ++ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates ++ * 29-Nov-2004 Ben Dooks Updated Koen's patch ++*/ ++ ++#ifndef __ASM_ARM_REGS_SDI ++#define __ASM_ARM_REGS_SDI "regs-sdi.h" ++ ++#define S3C2440_SDICON_SDRESET (1<<8) ++#define S3C2440_SDICON_MMCCLOCK (1<<5) ++#define S3C2410_SDICON_BYTEORDER (1<<4) ++#define S3C2410_SDICON_SDIOIRQ (1<<3) ++#define S3C2410_SDICON_RWAITEN (1<<2) ++#define S3C2410_SDICON_FIFORESET (1<<1) ++#define S3C2410_SDICON_CLOCKTYPE (1<<0) ++ ++#define S3C2410_SDICMDCON_ABORT (1<<12) ++#define S3C2410_SDICMDCON_WITHDATA (1<<11) ++#define S3C2410_SDICMDCON_LONGRSP (1<<10) ++#define S3C2410_SDICMDCON_WAITRSP (1<<9) ++#define S3C2410_SDICMDCON_CMDSTART (1<<8) ++#define S3C2410_SDICMDCON_SENDERHOST (1<<6) ++#define S3C2410_SDICMDCON_INDEX (0x3f) ++ ++#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) ++#define S3C2410_SDICMDSTAT_CMDSENT (1<<11) ++#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10) ++#define S3C2410_SDICMDSTAT_RSPFIN (1<<9) ++#define S3C2410_SDICMDSTAT_XFERING (1<<8) ++#define S3C2410_SDICMDSTAT_INDEX (0xff) ++ ++#define S3C2440_SDIDCON_DS_BYTE (0<<22) ++#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) ++#define S3C2440_SDIDCON_DS_WORD (2<<22) ++#define S3C2410_SDIDCON_IRQPERIOD (1<<21) ++#define S3C2410_SDIDCON_TXAFTERRESP (1<<20) ++#define S3C2410_SDIDCON_RXAFTERCMD (1<<19) ++#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18) ++#define S3C2410_SDIDCON_BLOCKMODE (1<<17) ++#define S3C2410_SDIDCON_WIDEBUS (1<<16) ++#define S3C2410_SDIDCON_DMAEN (1<<15) ++#define S3C2410_SDIDCON_STOP (1<<14) ++#define S3C2440_SDIDCON_DATSTART (1<<14) ++#define S3C2410_SDIDCON_DATMODE (3<<12) ++#define S3C2410_SDIDCON_BLKNUM (0x7ff) ++ ++/* constants for S3C2410_SDIDCON_DATMODE */ ++#define S3C2410_SDIDCON_XFER_READY (0<<12) ++#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12) ++#define S3C2410_SDIDCON_XFER_RXSTART (2<<12) ++#define S3C2410_SDIDCON_XFER_TXSTART (3<<12) ++ ++#define S3C2410_SDIDCNT_BLKNUM_MASK (0xFFF) ++#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) ++ ++#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) ++#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9) ++#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */ ++#define S3C2410_SDIDSTA_CRCFAIL (1<<7) ++#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6) ++#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5) ++#define S3C2410_SDIDSTA_XFERFINISH (1<<4) ++#define S3C2410_SDIDSTA_BUSYFINISH (1<<3) ++#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */ ++#define S3C2410_SDIDSTA_TXDATAON (1<<1) ++#define S3C2410_SDIDSTA_RXDATAON (1<<0) ++ ++#define S3C2440_SDIFSTA_FIFORESET (1<<16) ++#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ ++#define S3C2410_SDIFSTA_TFDET (1<<13) ++#define S3C2410_SDIFSTA_RFDET (1<<12) ++#define S3C2410_SDIFSTA_TFHALF (1<<11) ++#define S3C2410_SDIFSTA_TFEMPTY (1<<10) ++#define S3C2410_SDIFSTA_RFLAST (1<<9) ++#define S3C2410_SDIFSTA_RFFULL (1<<8) ++#define S3C2410_SDIFSTA_RFHALF (1<<7) ++#define S3C2410_SDIFSTA_COUNTMASK (0x7f) ++ ++#define S3C2410_SDIIMSK_RESPONSECRC (1<<17) ++#define S3C2410_SDIIMSK_CMDSENT (1<<16) ++#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15) ++#define S3C2410_SDIIMSK_RESPONSEND (1<<14) ++#define S3C2410_SDIIMSK_READWAIT (1<<13) ++#define S3C2410_SDIIMSK_SDIOIRQ (1<<12) ++#define S3C2410_SDIIMSK_FIFOFAIL (1<<11) ++#define S3C2410_SDIIMSK_CRCSTATUS (1<<10) ++#define S3C2410_SDIIMSK_DATACRC (1<<9) ++#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8) ++#define S3C2410_SDIIMSK_DATAFINISH (1<<7) ++#define S3C2410_SDIIMSK_BUSYFINISH (1<<6) ++#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */ ++#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4) ++#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3) ++#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2) ++#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1) ++#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0) ++ ++#endif /* __ASM_ARM_REGS_SDI */ +Index: u-boot/include/s3c24x0.h +=================================================================== +--- u-boot.orig/include/s3c24x0.h ++++ u-boot/include/s3c24x0.h +@@ -637,13 +637,7 @@ + S3C24X0_REG32 SDIDCNT; + S3C24X0_REG32 SDIDSTA; + S3C24X0_REG32 SDIFSTA; +-#ifdef __BIG_ENDIAN +- S3C24X0_REG8 res[3]; +- S3C24X0_REG8 SDIDAT; +-#else +- S3C24X0_REG8 SDIDAT; +- S3C24X0_REG8 res[3]; +-#endif ++ S3C24X0_REG32 SDIDAT; + S3C24X0_REG32 SDIIMSK; + } /*__attribute__((__packed__))*/ S3C2410_SDI; + +@@ -1123,11 +1117,7 @@ + #define rSDIDatCnt (*(volatile unsigned *)0x5A000030) + #define rSDIDatSta (*(volatile unsigned *)0x5A000034) + #define rSDIFSTA (*(volatile unsigned *)0x5A000038) +-#ifdef __BIG_ENDIAN +-#define rSDIDAT (*(volatile unsigned char *)0x5A00003F) +-#else +-#define rSDIDAT (*(volatile unsigned char *)0x5A00003C) +-#endif ++#define rSDIDAT (*(volatile unsigned *)0x5A00003C) + #define rSDIIntMsk (*(volatile unsigned *)0x5A000040) + + #endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-nand.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-nand.patch new file mode 100644 index 0000000000..dc363bbbab --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-nand.patch @@ -0,0 +1,525 @@ +This patch adds NAND (including boot-from-NAND via steppingstone) support to +the S3C2410 SoC code in u-boot + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/cpu/arm920t/s3c24x0/Makefile +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/Makefile 2007-02-28 03:47:44.000000000 +0100 ++++ u-boot/cpu/arm920t/s3c24x0/Makefile 2007-03-01 14:29:32.000000000 +0100 +@@ -26,7 +26,7 @@ + LIB = $(obj)lib$(SOC).a + + COBJS = i2c.o interrupts.o serial.o speed.o \ +- usb_ohci.o ++ usb_ohci.o nand_read.o nand.o + + SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +Index: u-boot/cpu/arm920t/s3c24x0/nand.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot/cpu/arm920t/s3c24x0/nand.c 2007-03-01 14:30:27.000000000 +0100 +@@ -0,0 +1,225 @@ ++/* ++ * (C) Copyright 2006 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++#if 0 ++#define DEBUGN printf ++#else ++#define DEBUGN(x, args ...) {} ++#endif ++ ++#if (CONFIG_COMMANDS & CFG_CMD_NAND) ++#if !defined(CFG_NAND_LEGACY) ++ ++#include <nand.h> ++#include <s3c2410.h> ++ ++#define __REGb(x) (*(volatile unsigned char *)(x)) ++#define __REGi(x) (*(volatile unsigned int *)(x)) ++ ++#define NF_BASE 0x4e000000 ++#define NFCONF __REGi(NF_BASE + 0x0) ++#define NFCMD __REGb(NF_BASE + 0x4) ++#define NFADDR __REGb(NF_BASE + 0x8) ++#define NFDATA __REGb(NF_BASE + 0xc) ++#define NFSTAT __REGb(NF_BASE + 0x10) ++#define NFECC0 __REGb(NF_BASE + 0x14) ++#define NFECC1 __REGb(NF_BASE + 0x15) ++#define NFECC2 __REGb(NF_BASE + 0x16) ++ ++#define S3C2410_NFCONF_EN (1<<15) ++#define S3C2410_NFCONF_512BYTE (1<<14) ++#define S3C2410_NFCONF_4STEP (1<<13) ++#define S3C2410_NFCONF_INITECC (1<<12) ++#define S3C2410_NFCONF_nFCE (1<<11) ++#define S3C2410_NFCONF_TACLS(x) ((x)<<8) ++#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) ++#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) ++ ++static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ DEBUGN("hwcontrol(): 0x%02x: ", cmd); ++ ++ switch (cmd) { ++ case NAND_CTL_SETNCE: ++ NFCONF &= ~S3C2410_NFCONF_nFCE; ++ DEBUGN("NFCONF=0x%08x\n", NFCONF); ++ break; ++ case NAND_CTL_CLRNCE: ++ NFCONF |= S3C2410_NFCONF_nFCE; ++ DEBUGN("NFCONF=0x%08x\n", NFCONF); ++ break; ++ case NAND_CTL_SETALE: ++ chip->IO_ADDR_W = NF_BASE + 0x8; ++ DEBUGN("SETALE\n"); ++ break; ++ case NAND_CTL_SETCLE: ++ chip->IO_ADDR_W = NF_BASE + 0x4; ++ DEBUGN("SETCLE\n"); ++ break; ++ default: ++ chip->IO_ADDR_W = NF_BASE + 0xc; ++ break; ++ } ++ return; ++} ++ ++static int s3c2410_dev_ready(struct mtd_info *mtd) ++{ ++ DEBUGN("dev_ready\n"); ++ return (NFSTAT & 0x01); ++} ++ ++static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd, ++ int column, int page_addr) ++{ ++ DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr); ++ ++ switch (cmd) { ++ case NAND_CMD_READ0: ++ case NAND_CMD_READ1: ++ case NAND_CMD_READOOB: ++ NFCMD = cmd; ++ NFADDR = column & 0xff; ++ NFADDR = page_addr & 0xff; ++ NFADDR = (page_addr >> 8) & 0xff; ++ NFADDR = (page_addr >> 16) & 0xff; ++ break; ++ case NAND_CMD_READID: ++ NFCMD = cmd; ++ NFADDR = 0; ++ break; ++ case NAND_CMD_PAGEPROG: ++ NFCMD = cmd; ++ printf("PAGEPROG not implemented\n"); ++ break; ++ case NAND_CMD_ERASE1: ++ NFCMD = cmd; ++ NFADDR = page_addr & 0xff; ++ NFADDR = (page_addr >> 8) & 0xff; ++ NFADDR = (page_addr >> 16) & 0xff; ++ break; ++ case NAND_CMD_ERASE2: ++ NFCMD = cmd; ++ break; ++ case NAND_CMD_SEQIN: ++ printf("SEQIN not implemented\n"); ++ break; ++ case NAND_CMD_STATUS: ++ NFCMD = cmd; ++ break; ++ case NAND_CMD_RESET: ++ NFCMD = cmd; ++ break; ++ default: ++ break; ++ } ++ ++ while (!s3c2410_dev_ready(mtd)); ++} ++ ++#ifdef CONFIG_S3C2410_NAND_HWECC ++void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) ++{ ++ DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode); ++ NFCONF |= S3C2410_NFCONF_INITECC; ++} ++ ++static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) ++{ ++ ecc_code[0] = NFECC0; ++ ecc_code[1] = NFECC1; ++ ecc_code[2] = NFECC2; ++ DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", mtd , ecc_code[0], ecc_code[1], ecc_code[2]); ++ ++ return 0; ++} ++ ++int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) ++{ ++ if (read_ecc[0] == calc_ecc[0] && ++ read_ecc[1] == calc_ecc[1] && ++ read_ecc[2] == calc_ecc[2]) ++ return 0; ++ ++ printf("s3c2410_nand_correct_data: not implemented\n"); ++ return -1; ++} ++#endif ++ ++int board_nand_init(struct nand_chip *nand) ++{ ++ u_int32_t cfg; ++ u_int8_t tacls, twrph0, twrph1; ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ ++ DEBUGN("board_nand_init()\n"); ++ ++ clk_power->CLKCON |= (1 << 4); ++ ++ /* initialize hardware */ ++ twrph0 = 3; twrph1 = 0; tacls = 0; ++ ++ cfg = S3C2410_NFCONF_EN; ++ cfg |= S3C2410_NFCONF_TACLS(tacls - 1); ++ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); ++ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); ++ ++ NFCONF = cfg; ++ //NFCONF = 0xf842; ++ ++ /* initialize nand_chip data structure */ ++ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c; ++ ++ /* read_buf and write_buf are default */ ++ /* read_byte and write_byte are default */ ++ ++ /* hwcontrol always must be implemented */ ++ nand->hwcontrol = s3c2410_hwcontrol; ++ ++ nand->dev_ready = s3c2410_dev_ready; ++ ++#ifdef CONFIG_S3C2410_NAND_HWECC ++ nand->enable_hwecc = s3c2410_nand_enable_hwecc; ++ nand->calculate_ecc = s3c2410_nand_calculate_ecc; ++ nand->correct_data = s3c2410_nand_correct_data; ++ nand->eccmode = NAND_ECC_HW3_512; ++#else ++ nand->eccmode = NAND_ECC_SOFT; ++#endif ++ ++#ifdef CONFIG_S3C2410_NAND_BBT ++ nand->options = NAND_USE_FLASH_BBT; ++#else ++ nand->options = 0; ++#endif ++ ++ DEBUGN("end of nand_init\n"); ++ ++ return 0; ++} ++ ++#else ++ #error "U-Boot legacy NAND support not available for S3C2410" ++#endif ++#endif +Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot/cpu/arm920t/s3c24x0/nand_read.c 2007-02-28 03:51:24.000000000 +0100 +@@ -0,0 +1,98 @@ ++/* ++ * nand_read.c: Simple NAND read functions for booting from NAND ++ * ++ * This is used by cpu/arm920/start.S assembler code, ++ * and the board-specific linker script must make sure this ++ * file is linked within the first 4kB of NAND flash. ++ * ++ * Taken from GPLv2 licensed vivi bootloader, ++ * Copyright (C) 2002 MIZI Research, Inc. ++ * ++ * Author: Hwang, Chideok <hwang@mizi.com> ++ * Date : $Date: 2004/02/04 10:37:37 $ ++ * ++ * u-boot integration and bad-block skipping (C) 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ */ ++ ++#include <common.h> ++ ++#ifdef CONFIG_S3C2410_NAND_BOOT ++ ++#define __REGb(x) (*(volatile unsigned char *)(x)) ++#define __REGi(x) (*(volatile unsigned int *)(x)) ++#define NF_BASE 0x4e000000 ++#define NFCONF __REGi(NF_BASE + 0x0) ++#define NFCMD __REGb(NF_BASE + 0x4) ++#define NFADDR __REGb(NF_BASE + 0x8) ++#define NFDATA __REGb(NF_BASE + 0xc) ++#define NFSTAT __REGb(NF_BASE + 0x10) ++ ++#define BUSY 1 ++inline void wait_idle(void) ++{ ++ int i; ++ ++ while (!(NFSTAT & BUSY)) ++ for (i=0; i<10; i++); ++} ++ ++#define NAND_SECTOR_SIZE 512 ++#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1) ++#define NAND_PAGE_SIZE 0x4000 ++ ++/* low level nand read function */ ++int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) ++{ ++ int i, j; ++ ++ if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) ++ return -1; /* invalid alignment */ ++ ++ /* chip Enable */ ++ NFCONF &= ~0x800; ++ for (i=0; i<10; i++); ++ ++ for (i=start_addr; i < (start_addr + size);) { ++#ifdef CONFIG_S3C2410_NAND_SKIP_BAD ++ if (start_addr % NAND_PAGE_SIZE == 0) { ++ unsigned char data; ++ NFCMD = 0x50; ++ NFADDR = 517&0xf; ++ NFADDR = (i >> 9) & 0xff; ++ NFADDR = (i >> 17) & 0xff; ++ NFADDR = (i >> 25) & 0xff; ++ wait_idle(); ++ data = (NFDATA & 0xff); ++ if (data != 0xff) { ++ /* Bad block */ ++ i += NAND_PAGE_SIZE; ++ size += NAND_PAGE_SIZE; ++ continue; ++ } ++ } ++#endif ++ /* READ0 */ ++ NFCMD = 0; ++ ++ /* Write Address */ ++ NFADDR = i & 0xff; ++ NFADDR = (i >> 9) & 0xff; ++ NFADDR = (i >> 17) & 0xff; ++ NFADDR = (i >> 25) & 0xff; ++ ++ wait_idle(); ++ ++ for (j=0; j < NAND_SECTOR_SIZE; j++, i++) { ++ *buf = (NFDATA & 0xff); ++ buf++; ++ } ++ } ++ ++ /* chip Disable */ ++ NFCONF |= 0x800; /* chip disable */ ++ ++ return 0; ++} ++ ++#endif /* CONFIG_S3C2410_NAND_BOOT */ +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S 2007-02-28 03:47:44.000000000 +0100 ++++ u-boot/cpu/arm920t/start.S 2007-03-01 14:29:22.000000000 +0100 +@@ -5,6 +5,10 @@ + * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <gj@denx.de> + * ++ * S3C2410 NAND portions ++ * Copyright (c) 2001 MIZI Research, Inc. ++ * Copyright (c) 2006 OpenMoko, Inc. (Harald Welte <laforge@openmmoko.org> ++ * + * See file CREDITS for list of people who contributed to this + * project. + * +@@ -27,6 +31,7 @@ + + #include <config.h> + #include <version.h> ++#include <s3c2410.h> + + + /* +@@ -161,6 +166,7 @@ + #endif + + #ifndef CONFIG_SKIP_RELOCATE_UBOOT ++#ifndef CONFIG_S3C2410_NAND_BOOT + relocate: /* relocate U-Boot to RAM */ + adr r0, _start /* r0 <- current position of code */ + ldr r1, _TEXT_BASE /* test if we run from flash or RAM */ +@@ -177,6 +183,93 @@ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop ++#else /* NAND_BOOT */ ++relocate: ++copy_myself: ++ /* mov r10, lr */ ++ ++ @ reset NAND ++ mov r1, #S3C2410_NAND_BASE ++ ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0 ++ str r2, [r1, #oNFCONF] ++ ldr r2, [r1, #oNFCONF] ++ bic r2, r2, #0x800 @ enable chip ++ str r2, [r1, #oNFCONF] ++ mov r2, #0xff @ RESET command ++ strb r2, [r1, #oNFCMD] ++ mov r3, #0 @ wait ++1: add r3, r3, #0x1 ++ cmp r3, #0xa ++ blt 1b ++2: ldr r2, [r1, #oNFSTAT] @ wait ready ++ tst r2, #0x1 ++ beq 2b ++ ldr r2, [r1, #oNFCONF] ++ orr r2, r2, #0x800 @ disable chip ++ str r2, [r1, #oNFCONF] ++ ++#if 0 ++ @ get ready to call C functions (for nand_read()) ++ ldr sp, DW_STACK_START @ setup stack pointer ++ mov fp, #0 @ no previous frame, so fp=0 ++#else ++ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ ++ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ ++ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ ++#ifdef CONFIG_USE_IRQ ++ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) ++#endif ++ sub sp, r0, #12 /* leave 3 words for abort-stack */ ++#endif ++ ++ @ copy u-boot to RAM ++ ldr r0, _TEXT_BASE ++ mov r1, #0x0 ++ mov r2, #CFG_UBOOT_SIZE ++ bl nand_read_ll ++ ++ tst r0, #0x0 ++ beq ok_nand_read ++#ifdef CONFIG_DEBUG_LL ++bad_nand_read: ++ ldr r0, STR_FAIL ++ ldr r1, SerBase ++ bl PrintWord ++1: b 1b @ infinite loop ++#endif ++ ++ok_nand_read: ++#ifdef CONFIG_DEBUG_LL ++ ldr r0, STR_OK ++ ldr r1, SerBase ++ bl PrintWord ++#endif ++ ++ @ verify ++ mov r0, #0 ++ @ldr r1, =0x33f00000 ++ ldr r1, _TEXT_BASE ++ mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes ++go_next: ++ ldr r3, [r0], #4 ++ ldr r4, [r1], #4 ++ teq r3, r4 ++ bne notmatch ++ subs r2, r2, #4 ++ beq done_nand_read ++ bne go_next ++notmatch: ++#ifdef CONFIG_DEBUG_LL ++ sub r0, r0, #4 ++ ldr r1, SerBase ++ bl PrintHexWord ++ ldr r0, STR_FAIL ++ ldr r1, SerBase ++ bl PrintWord ++#endif ++1: b 1b ++done_nand_read: ++#endif /* NAND_BOOT */ + #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ +Index: u-boot/include/s3c2410.h +=================================================================== +--- u-boot.orig/include/s3c2410.h 2007-02-28 03:51:24.000000000 +0100 ++++ u-boot/include/s3c2410.h 2007-03-01 14:29:22.000000000 +0100 +@@ -38,12 +38,6 @@ + #define S3C2410_ECCSIZE 512 + #define S3C2410_ECCBYTES 3 + +-typedef enum { +- S3C24X0_UART0, +- S3C24X0_UART1, +- S3C24X0_UART2 +-} S3C24X0_UARTS_NR; +- + /* S3C2410 device base addresses */ + #define S3C24X0_MEMCTL_BASE 0x48000000 + #define S3C24X0_USB_HOST_BASE 0x49000000 +@@ -65,9 +59,23 @@ + #define S3C2410_SDI_BASE 0x5A000000 + + ++#define oNFCONF 0x00 ++#define oNFCMD 0x04 ++#define oNFADDR 0x08 ++#define oNFDATA 0x0C ++#define oNFSTAT 0x10 ++#define oNFECC 0x14 ++ ++#ifndef __ASSEMBLER__ ++ + /* include common stuff */ + #include <s3c24x0.h> + ++typedef enum { ++ S3C24X0_UART0, ++ S3C24X0_UART1, ++ S3C24X0_UART2 ++} S3C24X0_UARTS_NR; + + static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) + { +@@ -142,6 +150,7 @@ + return (S3C2410_SDI * const)S3C2410_SDI_BASE; + } + ++#endif + + /* ISR */ + #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-norelocate_irqvec_cpy.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-norelocate_irqvec_cpy.patch new file mode 100644 index 0000000000..0d5a49771d --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-norelocate_irqvec_cpy.patch @@ -0,0 +1,32 @@ +If we've somehow magically make u-boot end up in RAM (JTAG, ...), then that RAM +is mapped to 0x30000000 and not 0, so we need to copy the interrupt vectors, etc. + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -332,7 +332,23 @@ done_nand_read: + strb r1, [r0] + #endif /* CONFIG_S3C2410_NAND_BOOT */ + done_relocate: +-#endif /* CONFIG_SKIP_RELOCATE_UBOOT */ ++ ++#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410) ++ /* In the case of the S3C2410, if we've somehow magically (JTAG, ...) ++ ended up in RAM, then that ram is mapped to 0x30000000 and not 0. ++ So we need to copy the interrupt vectors, etc. */ ++ ++ mov r0, #0 ++ ldr r1, _TEXT_BASE ++ mov r2, #0x40 ++irqvec_cpy_next: ++ ldr r3, [r1], #4 ++ str r3, [r0], #4 ++ subs r2, r2, #4 ++ bne irqvec_cpy_next ++#endif /* CONFIG_USE_IRQ */ ++ ++#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */ + + /* Set up the stack */ + stack_setup: diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-warnings-fix.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-warnings-fix.patch new file mode 100644 index 0000000000..8cc442a865 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410-warnings-fix.patch @@ -0,0 +1,98 @@ +Index: u-boot/include/s3c2410.h +=================================================================== +--- u-boot.orig/include/s3c2410.h 2007-02-16 23:53:20.000000000 +0100 ++++ u-boot/include/s3c2410.h 2007-02-16 23:53:21.000000000 +0100 +@@ -69,75 +69,75 @@ + #include <s3c24x0.h> + + +-static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) ++static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) + { + return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; + } +-static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void) ++static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void) + { + return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; + } +-static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void) ++static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void) + { + return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; + } +-static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void) ++static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void) + { + return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; + } +-static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void) ++static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void) + { + return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; + } +-static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void) ++static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void) + { + return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; + } +-static inline S3C2410_NAND * const S3C2410_GetBase_NAND(void) ++static inline S3C2410_NAND * S3C2410_GetBase_NAND(void) + { + return (S3C2410_NAND * const)S3C2410_NAND_BASE; + } +-static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) ++static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) + { + return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); + } +-static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void) ++static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void) + { + return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; + } +-static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void) ++static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void) + { + return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; + } +-static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void) ++static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void) + { + return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; + } +-static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void) ++static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void) + { + return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; + } +-static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void) ++static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void) + { + return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; + } +-static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void) ++static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void) + { + return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; + } +-static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void) ++static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void) + { + return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; + } +-static inline S3C2410_ADC * const S3C2410_GetBase_ADC(void) ++static inline S3C2410_ADC * S3C2410_GetBase_ADC(void) + { + return (S3C2410_ADC * const)S3C2410_ADC_BASE; + } +-static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void) ++static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void) + { + return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; + } +-static inline S3C2410_SDI * const S3C2410_GetBase_SDI(void) ++static inline S3C2410_SDI * S3C2410_GetBase_SDI(void) + { + return (S3C2410_SDI * const)S3C2410_SDI_BASE; + } diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_fb.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_fb.patch new file mode 100644 index 0000000000..b50853554b --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_fb.patch @@ -0,0 +1,215 @@ +Index: u-boot/drivers/Makefile +=================================================================== +--- u-boot.orig/drivers/Makefile ++++ u-boot/drivers/Makefile +@@ -52,7 +52,7 @@ + ks8695eth.o \ + pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \ + rpx_pcmcia.o \ +- fsl_i2c.o ++ fsl_i2c.o s3c2410_fb.o + + SRCS := $(COBJS:.o=.c) + OBJS := $(addprefix $(obj),$(COBJS)) +Index: u-boot/drivers/s3c2410_fb.c +=================================================================== +--- /dev/null ++++ u-boot/drivers/s3c2410_fb.c +@@ -0,0 +1,166 @@ ++/* ++ * (C) Copyright 2006 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++#if defined(CONFIG_VIDEO_S3C2410) ++ ++#include <video_fb.h> ++#include "videomodes.h" ++#include <s3c2410.h> ++/* ++ * Export Graphic Device ++ */ ++GraphicDevice smi; ++ ++#define VIDEO_MEM_SIZE 0x200000 /* 480x640x16bit = 614400 bytes */ ++ ++extern void board_video_init(GraphicDevice *pGD); ++ ++/******************************************************************************* ++ * ++ * Init video chip with common Linux graphic modes (lilo) ++ */ ++void *video_hw_init (void) ++{ ++ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); ++ GraphicDevice *pGD = (GraphicDevice *)&smi; ++ int videomode; ++ unsigned long t1, hsynch, vsynch; ++ char *penv; ++ int tmp, i, bits_per_pixel; ++ struct ctfb_res_modes *res_mode; ++ struct ctfb_res_modes var_mode; ++ unsigned char videoout; ++ ++ /* Search for video chip */ ++ printf("Video: "); ++ ++ tmp = 0; ++ ++ videomode = CFG_DEFAULT_VIDEO_MODE; ++ /* get video mode via environment */ ++ if ((penv = getenv ("videomode")) != NULL) { ++ /* deceide if it is a string */ ++ if (penv[0] <= '9') { ++ videomode = (int) simple_strtoul (penv, NULL, 16); ++ tmp = 1; ++ } ++ } else { ++ tmp = 1; ++ } ++ if (tmp) { ++ /* parameter are vesa modes */ ++ /* search params */ ++ for (i = 0; i < VESA_MODES_COUNT; i++) { ++ if (vesa_modes[i].vesanr == videomode) ++ break; ++ } ++ if (i == VESA_MODES_COUNT) { ++ printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE); ++ i = 0; ++ } ++ res_mode = ++ (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i]. ++ resindex]; ++ bits_per_pixel = vesa_modes[i].bits_per_pixel; ++ } else { ++ ++ res_mode = (struct ctfb_res_modes *) &var_mode; ++ bits_per_pixel = video_get_params (res_mode, penv); ++ } ++ ++ /* calculate hsynch and vsynch freq (info only) */ ++ t1 = (res_mode->left_margin + res_mode->xres + ++ res_mode->right_margin + res_mode->hsync_len) / 8; ++ t1 *= 8; ++ t1 *= res_mode->pixclock; ++ t1 /= 1000; ++ hsynch = 1000000000L / t1; ++ t1 *= ++ (res_mode->upper_margin + res_mode->yres + ++ res_mode->lower_margin + res_mode->vsync_len); ++ t1 /= 1000; ++ vsynch = 1000000000L / t1; ++ ++ /* fill in Graphic device struct */ ++ sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres, ++ res_mode->yres, bits_per_pixel, (hsynch / 1000), ++ (vsynch / 1000)); ++ printf ("%s\n", pGD->modeIdent); ++ pGD->winSizeX = res_mode->xres; ++ pGD->winSizeY = res_mode->yres; ++ pGD->plnSizeX = res_mode->xres; ++ pGD->plnSizeY = res_mode->yres; ++ switch (bits_per_pixel) { ++ case 8: ++ pGD->gdfBytesPP = 1; ++ pGD->gdfIndex = GDF__8BIT_INDEX; ++ break; ++ case 15: ++ pGD->gdfBytesPP = 2; ++ pGD->gdfIndex = GDF_15BIT_555RGB; ++ break; ++ case 16: ++ pGD->gdfBytesPP = 2; ++ pGD->gdfIndex = GDF_16BIT_565RGB; ++ break; ++ case 24: ++ pGD->gdfBytesPP = 3; ++ pGD->gdfIndex = GDF_24BIT_888RGB; ++ break; ++ } ++ ++ /* statically configure settings */ ++ pGD->winSizeX = pGD->plnSizeX = 480; ++ pGD->winSizeY = pGD->plnSizeY = 640; ++ pGD->gdfBytesPP = 2; ++ pGD->gdfIndex = GDF_16BIT_565RGB; ++ ++ pGD->frameAdrs = LCD_VIDEO_ADDR; ++ pGD->memSize = VIDEO_MEM_SIZE; ++ ++ board_video_init(pGD); ++ ++ lcd->LCDSADDR1 = pGD->frameAdrs >> 1; ++ ++ /* This marks the end of the frame buffer. */ ++ lcd->LCDSADDR2 = (lcd->LCDSADDR1&0x1fffff) + (pGD->winSizeX+0) * pGD->winSizeY; ++ lcd->LCDSADDR3 = pGD->winSizeX; ++ ++ /* Clear video memory */ ++ memset(pGD->frameAdrs, 0, pGD->memSize); ++ ++ /* Enable Display */ ++ lcd->LCDCON1 |= 0x01; /* ENVID = 1 */ ++ ++ return ((void*)&smi); ++} ++ ++void ++video_set_lut (unsigned int index, /* color number */ ++ unsigned char r, /* red */ ++ unsigned char g, /* green */ ++ unsigned char b /* blue */ ++ ) ++{ ++} ++ ++#endif /* CONFIG_VIDEO_S3C2410 */ +Index: u-boot/drivers/cfb_console.c +=================================================================== +--- u-boot.orig/drivers/cfb_console.c ++++ u-boot/drivers/cfb_console.c +@@ -141,6 +141,14 @@ + #endif + + /*****************************************************************************/ ++/* Defines for the S3C2410 driver */ ++/*****************************************************************************/ ++#ifdef CONFIG_VIDEO_S3C2410 ++/* it actually is little-endian, but the host CPU, too ! */ ++//#define VIDEO_FB_LITTLE_ENDIAN ++#endif ++ ++/*****************************************************************************/ + /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */ + /*****************************************************************************/ + #include <video_fb.h> +@@ -307,6 +315,11 @@ + #define SHORTSWAP32(x) (x) + #endif + ++#ifdef CONFIG_VIDEO_S3C2410 ++#undef SHORTSWAP32 ++#define SHORTSWAP32(x) ((((x) & 0xffff) << 16) | (((x) >> 16) & 0xffff)) ++#endif ++ + #if defined(DEBUG) || defined(DEBUG_CFB_CONSOLE) + #define PRINTD(x) printf(x) + #else diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_udc.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_udc.patch new file mode 100644 index 0000000000..16bee3e26a --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2410_udc.patch @@ -0,0 +1,1263 @@ +USB Device Controller Driver for Samsung S3C2410 SoC + +Index: u-boot/drivers/Makefile +=================================================================== +--- u-boot.orig/drivers/Makefile ++++ u-boot/drivers/Makefile +@@ -47,7 +47,7 @@ + status_led.o sym53c8xx.o systemace.o ahci.o \ + ti_pci1410a.o tigon3.o tsec.o \ + tsi108_eth.o tsi108_i2c.o tsi108_pci.o \ +- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ ++ usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbdcore_s3c2410.o usbtty.o \ + videomodes.o w83c553f.o \ + ks8695eth.o \ + pcf50606.o \ +Index: u-boot/drivers/usbdcore_s3c2410.c +=================================================================== +--- /dev/null ++++ u-boot/drivers/usbdcore_s3c2410.c +@@ -0,0 +1,730 @@ ++/* S3C2410 USB Device Controller Driver for u-boot ++ * ++ * (C) Copyright 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * based on Linux' s3c2410_udc.c, which is ++ * Copyright (C) 2004-2006 Herbert Pötzl - Arnaud Patard ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ */ ++ ++#include <config.h> ++ ++#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE) ++ ++#include <common.h> ++ ++/* we can't use the regular debug macros since the console might be ++ * set to usbtty, which would cause deadlocks! */ ++#ifdef DEBUG ++#undef debug ++#undef debugX ++#define debug(fmt,args...) serial_printf (fmt ,##args) ++#define debugX(level,fmt,args...) if (DEBUG>=level) serial_printf(fmt,##args) ++#endif ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#include <asm/io.h> ++#include <s3c2410.h> ++ ++#include "usbdcore.h" ++#include "usbdcore_s3c2410.h" ++#include "usbdcore_ep0.h" ++#include <usb_cdc_acm.h> ++ ++enum ep0_state { ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_END_XFER, ++ EP0_STALL, ++}; ++ ++static struct urb *ep0_urb = NULL; ++ ++static struct usb_device_instance *udc_device; /* Used in interrupt handler */ ++ ++static inline int fifo_count_out(void) ++{ ++ int tmp; ++ ++ tmp = inl(S3C2410_UDC_OUT_FIFO_CNT2_REG) << 8; ++ tmp |= inl(S3C2410_UDC_OUT_FIFO_CNT1_REG); ++ ++ return tmp & 0xffff; ++} ++ ++static const unsigned long ep_fifo_reg[S3C2410_UDC_NUM_ENDPOINTS] = { ++ S3C2410_UDC_EP0_FIFO_REG, ++ S3C2410_UDC_EP1_FIFO_REG, ++ S3C2410_UDC_EP2_FIFO_REG, ++ S3C2410_UDC_EP3_FIFO_REG, ++ S3C2410_UDC_EP4_FIFO_REG, ++}; ++ ++static int s3c2410_write_noniso_tx_fifo(struct usb_endpoint_instance *endpoint) ++{ ++ struct urb *urb = endpoint->tx_urb; ++ unsigned int last, i; ++ unsigned int ep = endpoint->endpoint_address & 0x7f; ++ unsigned long fifo_reg = ep_fifo_reg[ep]; ++ ++ /* WARNING: don't ever put serial debug printf's in non-error codepaths ++ * here, it is called from the time critical EP0 codepath ! */ ++ ++ if (!urb || ep >= S3C2410_UDC_NUM_ENDPOINTS) { ++ serial_printf("no urb or wrong endpoint\n"); ++ return -1; ++ } ++ ++ S3C2410_UDC_SETIX(ep); ++ if ((last = MIN(urb->actual_length - endpoint->sent, ++ endpoint->tx_packetSize))) { ++ u8 *cp = urb->buffer + endpoint->sent; ++ ++ for (i = 0; i < last; i++) ++ outb(*(cp+i), fifo_reg); ++ } ++ endpoint->last = last; ++ ++ if (endpoint->sent + last < urb->actual_length) { ++ /* not all data has been transmitted so far */ ++ return 0; ++ } ++ ++ if (last == endpoint->tx_packetSize) { ++ /* we need to send one more packet (ZLP) */ ++ return 0; ++ } ++ ++ return 1; ++} ++ ++ ++static void s3c2410_deconfigure_device (void) ++{ ++ /* FIXME: Implement this */ ++} ++ ++static void s3c2410_configure_device (struct usb_device_instance *device) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ S3C24X0_CLOCK_POWER * const cpower = S3C24X0_GetBase_CLOCK_POWER(); ++ ++ /* disable EP0-4 SUBD interrupts ? */ ++ outl(0x00, S3C2410_UDC_USB_INT_EN_REG); ++ ++ /* UPLL already configured by board-level init code */ ++ ++ /* configure USB pads to device mode */ ++ gpio->MISCCR &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1); ++ ++ /* don't disable USB clock */ ++ cpower->CLKSLOW &= ~S3C2410_CLKSLOW_UCLK_OFF; ++ ++ /* clear interrupt registers */ ++ inl(S3C2410_UDC_EP_INT_REG); ++ inl(S3C2410_UDC_USB_INT_REG); ++ outl(0xff, S3C2410_UDC_EP_INT_REG); ++ outl(0xff, S3C2410_UDC_USB_INT_REG); ++ ++ /* enable USB interrupts for RESET and SUSPEND/RESUME */ ++ outl(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND, ++ S3C2410_UDC_USB_INT_EN_REG); ++} ++ ++static void udc_set_address(unsigned char address) ++{ ++ address |= 0x80; /* ADDR_UPDATE bit */ ++ outl(address, S3C2410_UDC_FUNC_ADDR_REG); ++} ++ ++extern struct usb_device_descriptor device_descriptor; ++ ++static void s3c2410_udc_ep0(void) ++{ ++ u_int8_t ep0csr; ++ struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array; ++ ++ S3C2410_UDC_SETIX(0); ++ ep0csr = inl(S3C2410_UDC_IN_CSR1_REG); ++ ++ /* clear stall status */ ++ if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) { ++ serial_printf("Clearing SENT_STALL\n"); ++ clear_ep0_sst(); ++ if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY) ++ clear_ep0_opr(); ++ ep0->state = EP0_IDLE; ++ return; ++ } ++ ++ /* clear setup end */ ++ if (ep0csr & S3C2410_UDC_EP0_CSR_SE ++ /* && ep0->state != EP0_IDLE */) { ++ serial_printf("Clearing SETUP_END\n"); ++ clear_ep0_se(); ++#if 1 ++ if (ep0csr & S3C2410_UDC_EP0_CSR_SOPKTRDY) { ++ /* Flush FIFO */ ++ while (inl(S3C2410_UDC_OUT_FIFO_CNT1_REG)) ++ inl(S3C2410_UDC_EP0_FIFO_REG); ++ clear_ep0_opr(); ++ } ++#endif ++ ep0->state = EP0_IDLE; ++ return; ++ } ++ ++ /* Don't ever put [serial] debugging in non-error codepaths here, it ++ * will violate the tight timing constraints of this USB Device ++ * controller (and lead to bus enumeration failures) */ ++ ++ switch (ep0->state) { ++ int i, fifo_count; ++ unsigned char *datap; ++ case EP0_IDLE: ++ if (!(ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY)) ++ break; ++ ++ datap = (unsigned char *) &ep0_urb->device_request; ++ /* host->device packet has been received */ ++ ++ /* pull it out of the fifo */ ++ fifo_count = fifo_count_out(); ++ for (i = 0; i < fifo_count; i++) { ++ *datap = (unsigned char)inl(S3C2410_UDC_EP0_FIFO_REG); ++ datap++; ++ } ++ if (fifo_count != 8) { ++ debug("STRANGE FIFO COUNT: %u bytes\n", fifo_count); ++ set_ep0_ss(); ++ return; ++ } ++ ++ if (ep0_urb->device_request.wLength == 0) { ++ if (ep0_recv_setup(ep0_urb)) { ++ /* Not a setup packet, stall next EP0 transaction */ ++ debug("can't parse setup packet1\n"); ++ set_ep0_ss(); ++ set_ep0_de_out(); ++ ep0->state = EP0_IDLE; ++ return; ++ } ++ /* There are some requests with which we need to deal ++ * manually here */ ++ switch (ep0_urb->device_request.bRequest) { ++ case USB_REQ_SET_CONFIGURATION: ++ if (!ep0_urb->device_request.wValue) ++ usbd_device_event_irq(udc_device, ++ DEVICE_DE_CONFIGURED, 0); ++ else ++ usbd_device_event_irq(udc_device, ++ DEVICE_CONFIGURED, 0); ++ break; ++ case USB_REQ_SET_ADDRESS: ++ udc_set_address(udc_device->address); ++ usbd_device_event_irq(udc_device, ++ DEVICE_ADDRESS_ASSIGNED, 0); ++ break; ++ default: ++ break; ++ } ++ set_ep0_de_out(); ++ ep0->state = EP0_IDLE; ++ } else { ++ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK) ++ == USB_REQ_HOST2DEVICE) { ++ clear_ep0_opr(); ++ ep0->state = EP0_OUT_DATA_PHASE; ++ ep0_urb->buffer = ep0_urb->buffer_data; ++ ep0_urb->buffer_length = sizeof(ep0_urb->buffer_data); ++ ep0_urb->actual_length = 0; ++ } else { ++ ep0->state = EP0_IN_DATA_PHASE; ++ ++ if (ep0_recv_setup(ep0_urb)) { ++ /* Not a setup packet, stall next EP0 transaction */ ++ debug("can't parse setup packet2\n"); ++ set_ep0_ss(); ++ //set_ep0_de_out(); ++ ep0->state = EP0_IDLE; ++ return; ++ } ++ clear_ep0_opr(); ++ ep0->tx_urb = ep0_urb; ++ ep0->sent = ep0->last = 0; ++ ++ if (s3c2410_write_noniso_tx_fifo(ep0)) { ++ ep0->state = EP0_IDLE; ++ set_ep0_de_in(); ++ } else ++ set_ep0_ipr(); ++ } ++ } ++ break; ++ case EP0_IN_DATA_PHASE: ++ if (!(ep0csr & S3C2410_UDC_EP0_CSR_IPKRDY)) { ++ ep0->sent += ep0->last; ++ ++ if (s3c2410_write_noniso_tx_fifo(ep0)) { ++ ep0->state = EP0_IDLE; ++ set_ep0_de_in(); ++ } else ++ set_ep0_ipr(); ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: ++ if (ep0csr & S3C2410_UDC_EP0_CSR_OPKRDY) { ++ u32 urb_avail = ep0_urb->buffer_length - ep0_urb->actual_length; ++ u_int8_t *cp = ep0_urb->buffer + ep0_urb->actual_length; ++ int i, fifo_count; ++ ++ fifo_count = fifo_count_out(); ++ if (fifo_count < urb_avail) ++ urb_avail = fifo_count; ++ ++ for (i = 0; i < urb_avail; i++) ++ *cp++ = inl(S3C2410_UDC_EP0_FIFO_REG); ++ ++ ep0_urb->actual_length += urb_avail; ++ ++ if (fifo_count < ep0->rcv_packetSize || ++ ep0_urb->actual_length >= ep0_urb->device_request.wLength) { ++ ep0->state = EP0_IDLE; ++ if (ep0_recv_setup(ep0_urb)) { ++ /* Not a setup packet, stall next EP0 transaction */ ++ debug("can't parse setup packet3\n"); ++ set_ep0_ss(); ++ //set_ep0_de_out(); ++ return; ++ } ++ set_ep0_de_out(); ++ } else ++ clear_ep0_opr(); ++ } ++ break; ++ case EP0_END_XFER: ++ ep0->state = EP0_IDLE; ++ break; ++ case EP0_STALL: ++ //set_ep0_ss; ++ ep0->state = EP0_IDLE; ++ break; ++ } ++} ++ ++ ++static void s3c2410_udc_epn(int ep) ++{ ++ struct usb_endpoint_instance *endpoint; ++ struct urb *urb; ++ u32 ep_csr1; ++ ++ if (ep >= S3C2410_UDC_NUM_ENDPOINTS) ++ return; ++ ++ endpoint = &udc_device->bus->endpoint_array[ep]; ++ ++ S3C2410_UDC_SETIX(ep); ++ ++ if (endpoint->endpoint_address & USB_DIR_IN) { ++ /* IN transfer (device to host) */ ++ ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG); ++ debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1); ++ ++ urb = endpoint->tx_urb; ++ if (ep_csr1 & S3C2410_UDC_ICSR1_SENTSTL) { ++ /* Stall handshake */ ++ debug("stall\n"); ++ outl(0x00, S3C2410_UDC_IN_CSR1_REG); ++ return; ++ } ++ if (!(ep_csr1 & S3C2410_UDC_ICSR1_PKTRDY) && urb && ++ urb->actual_length) { ++ ++ debug("completing previously send data "); ++ usbd_tx_complete(endpoint); ++ ++ /* push pending data into FIFO */ ++ if ((endpoint->last == endpoint->tx_packetSize) && ++ (urb->actual_length - endpoint->sent - endpoint->last == 0)) { ++ endpoint->sent += endpoint->last; ++ /* Write 0 bytes of data (ZLP) */ ++ debug("ZLP "); ++ outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG); ++ } else { ++ /* write actual data to fifo */ ++ debug("TX_DATA "); ++ s3c2410_write_noniso_tx_fifo(endpoint); ++ outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG); ++ } ++ } ++ debug("\n"); ++ } else { ++ /* OUT transfer (host to device) */ ++ ep_csr1 = inl(S3C2410_UDC_OUT_CSR1_REG); ++ debug("for ep=%u, CSR1=0x%x ", ep, ep_csr1); ++ ++ urb = endpoint->rcv_urb; ++ if (ep_csr1 & S3C2410_UDC_OCSR1_SENTSTL) { ++ /* Stall handshake */ ++ outl(0x00, S3C2410_UDC_IN_CSR1_REG); ++ return; ++ } ++ if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && urb) { ++ /* Read pending data from fifo */ ++ u32 fifo_count = fifo_count_out(); ++ int is_last = 0; ++ u32 i, urb_avail = urb->buffer_length - urb->actual_length; ++ u8 *cp = urb->buffer + urb->actual_length; ++ ++ if (fifo_count < endpoint->rcv_packetSize) ++ is_last = 1; ++ ++ debug("fifo_count=%u is_last=%, urb_avail=%u)\n", ++ fifo_count, is_last, urb_avail); ++ ++ if (fifo_count < urb_avail) ++ urb_avail = fifo_count; ++ ++ for (i = 0; i < urb_avail; i++) ++ *cp++ = inb(ep_fifo_reg[ep]); ++ ++ if (is_last) ++ outl(ep_csr1 & ~S3C2410_UDC_OCSR1_PKTRDY, ++ S3C2410_UDC_OUT_CSR1_REG); ++ ++ usbd_rcv_complete(endpoint, urb_avail, 0); ++ } ++ } ++ ++ urb = endpoint->rcv_urb; ++} ++ ++/* ++------------------------------------------------------------------------------- ++*/ ++ ++/* this is just an empty wrapper for usbtty who assumes polling operation */ ++void udc_irq(void) ++{ ++} ++ ++/* Handle general USB interrupts and dispatch according to type. ++ * This function implements TRM Figure 14-13. ++ */ ++void s3c2410_udc_irq(void) ++{ ++ struct usb_endpoint_instance *ep0 = udc_device->bus->endpoint_array; ++ u_int32_t save_idx = inl(S3C2410_UDC_INDEX_REG); ++ ++ /* read interrupt sources */ ++ u_int32_t usb_status = inl(S3C2410_UDC_USB_INT_REG); ++ u_int32_t usbd_status = inl(S3C2410_UDC_EP_INT_REG); ++ ++ //debug("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status, usbd_status); ++ ++ /* clear interrupts */ ++ outl(usb_status, S3C2410_UDC_USB_INT_REG); ++ ++ if (usb_status & S3C2410_UDC_USBINT_RESET) { ++ //serial_putc('R'); ++ debug("RESET pwr=0x%x\n", inl(S3C2410_UDC_PWR_REG)); ++ udc_setup_ep(udc_device, 0, ep0); ++ outl(S3C2410_UDC_EP0_CSR_SSE|S3C2410_UDC_EP0_CSR_SOPKTRDY, S3C2410_UDC_EP0_CSR_REG); ++ ep0->state = EP0_IDLE; ++ usbd_device_event_irq (udc_device, DEVICE_RESET, 0); ++ } ++ ++ if (usb_status & S3C2410_UDC_USBINT_RESUME) { ++ debug("RESUME\n"); ++ usbd_device_event_irq(udc_device, DEVICE_BUS_ACTIVITY, 0); ++ } ++ ++ if (usb_status & S3C2410_UDC_USBINT_SUSPEND) { ++ debug("SUSPEND\n"); ++ usbd_device_event_irq(udc_device, DEVICE_BUS_INACTIVE, 0); ++ } ++ ++ /* Endpoint Interrupts */ ++ if (usbd_status) { ++ int i; ++ ++ if (usbd_status & S3C2410_UDC_INT_EP0) { ++ outl(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG); ++ s3c2410_udc_ep0(); ++ } ++ ++ for (i = 1; i < 5; i++) { ++ u_int32_t tmp = 1 << i; ++ ++ if (usbd_status & tmp) { ++ /* FIXME: Handle EP X */ ++ outl(tmp, S3C2410_UDC_EP_INT_REG); ++ s3c2410_udc_epn(i); ++ } ++ } ++ } ++ S3C2410_UDC_SETIX(save_idx); ++} ++ ++/* ++------------------------------------------------------------------------------- ++*/ ++ ++ ++/* ++ * Start of public functions. ++ */ ++ ++/* Called to start packet transmission. */ ++void udc_endpoint_write (struct usb_endpoint_instance *endpoint) ++{ ++ unsigned short epnum = ++ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK; ++ ++ debug("Entering for ep %x ", epnum); ++ ++ if (endpoint->tx_urb) { ++ u32 ep_csr1; ++ debug("We have an URB, transmitting\n"); ++ ++ s3c2410_write_noniso_tx_fifo(endpoint); ++ ++ S3C2410_UDC_SETIX(epnum); ++ ++ ep_csr1 = inl(S3C2410_UDC_IN_CSR1_REG); ++ outl(ep_csr1|S3C2410_UDC_ICSR1_PKTRDY, S3C2410_UDC_IN_CSR1_REG); ++ } else ++ debug("\n"); ++} ++ ++/* Start to initialize h/w stuff */ ++int udc_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); ++ ++ udc_device = NULL; ++ ++ /* Set and check clock control. ++ * We might ought to be using the clock control API to do ++ * this instead of fiddling with the clock registers directly ++ * here. ++ */ ++ clk_power->CLKCON |= (1 << 7); ++ ++ /* Print banner with device revision */ ++ printf("USB: S3C2410 USB Deviced\n"); ++ ++ /* ++ * At this point, device is ready for configuration... ++ */ ++ outl(0x00, S3C2410_UDC_EP_INT_EN_REG); ++ outl(0x00, S3C2410_UDC_USB_INT_EN_REG); ++ ++ irq->INTMSK &= ~BIT_USBD; ++ ++ return 0; ++} ++ ++/* ++ * udc_setup_ep - setup endpoint ++ * ++ * Associate a physical endpoint with endpoint_instance ++ */ ++int udc_setup_ep (struct usb_device_instance *device, ++ unsigned int ep, struct usb_endpoint_instance *endpoint) ++{ ++ int ep_addr = endpoint->endpoint_address; ++ int packet_size; ++ int attributes; ++ u_int32_t maxp; ++ ++ S3C2410_UDC_SETIX(ep); ++ ++ if (ep) { ++ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { ++ /* IN endpoint */ ++ outl(S3C2410_UDC_ICSR1_FFLUSH|S3C2410_UDC_ICSR1_CLRDT, ++ S3C2410_UDC_IN_CSR1_REG); ++ outl(S3C2410_UDC_ICSR2_MODEIN, S3C2410_UDC_IN_CSR2_REG); ++ packet_size = endpoint->tx_packetSize; ++ attributes = endpoint->tx_attributes; ++ } else { ++ /* OUT endpoint */ ++ outl(S3C2410_UDC_ICSR1_CLRDT, S3C2410_UDC_IN_CSR1_REG); ++ outl(0, S3C2410_UDC_IN_CSR2_REG); ++ outl(S3C2410_UDC_OCSR1_FFLUSH|S3C2410_UDC_OCSR1_CLRDT, ++ S3C2410_UDC_OUT_CSR1_REG); ++ outl(0, S3C2410_UDC_OUT_CSR2_REG); ++ packet_size = endpoint->rcv_packetSize; ++ attributes = endpoint->rcv_attributes; ++ } ++ } else ++ packet_size = endpoint->tx_packetSize; ++ ++ switch (packet_size) { ++ case 8: ++ maxp = S3C2410_UDC_MAXP_8; ++ break; ++ case 16: ++ maxp = S3C2410_UDC_MAXP_16; ++ break; ++ case 32: ++ maxp = S3C2410_UDC_MAXP_32; ++ break; ++ case 64: ++ maxp = S3C2410_UDC_MAXP_64; ++ break; ++ default: ++ debug("invalid packet size %u\n", packet_size); ++ return -1; ++ } ++ ++ debug("setting up endpoint %u addr %x packet_size %u maxp %u\n", ep, ++ endpoint->endpoint_address, packet_size, maxp); ++ ++ /* Set maximum packet size */ ++ writel(maxp, S3C2410_UDC_MAXP_REG); ++ ++ return 0; ++} ++ ++/* ************************************************************************** */ ++ ++/** ++ * udc_connected - is the USB cable connected ++ * ++ * Return non-zero if cable is connected. ++ */ ++#if 0 ++int udc_connected (void) ++{ ++ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT); ++} ++#endif ++ ++/* Turn on the USB connection by enabling the pullup resistor */ ++void udc_connect (void) ++{ ++ debug("connect, enable Pullup\n"); ++ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); ++ ++ udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0); ++ udelay(10000); ++ udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 1); ++ ++ irq->INTMSK &= ~BIT_USBD; ++} ++ ++/* Turn off the USB connection by disabling the pullup resistor */ ++void udc_disconnect (void) ++{ ++ debug("disconnect, disable Pullup\n"); ++ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); ++ ++ udc_ctrl(UDC_CTRL_PULLUP_ENABLE, 0); ++ ++ /* Disable interrupt (we don't want to get interrupts while the kernel ++ * is relocating itself */ ++ irq->INTMSK |= BIT_USBD; ++} ++ ++/* Switch on the UDC */ ++void udc_enable (struct usb_device_instance *device) ++{ ++ debug("enable device %p, status %d\n", device, device->status); ++ ++ /* Save the device structure pointer */ ++ udc_device = device; ++ ++ /* Setup ep0 urb */ ++ if (!ep0_urb) ++ ep0_urb = usbd_alloc_urb(udc_device, ++ udc_device->bus->endpoint_array); ++ else ++ serial_printf("udc_enable: ep0_urb already allocated %p\n", ++ ep0_urb); ++ ++ s3c2410_configure_device(device); ++} ++ ++/* Switch off the UDC */ ++void udc_disable (void) ++{ ++ debug("disable UDC\n"); ++ ++ s3c2410_deconfigure_device(); ++ ++ /* Free ep0 URB */ ++ if (ep0_urb) { ++ /*usbd_dealloc_urb(ep0_urb); */ ++ ep0_urb = NULL; ++ } ++ ++ /* Reset device pointer. ++ * We ought to do this here to balance the initialization of udc_device ++ * in udc_enable, but some of our other exported functions get called ++ * by the bus interface driver after udc_disable, so we have to hang on ++ * to the device pointer to avoid a null pointer dereference. */ ++ /* udc_device = NULL; */ ++} ++ ++/** ++ * udc_startup - allow udc code to do any additional startup ++ */ ++void udc_startup_events (struct usb_device_instance *device) ++{ ++ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */ ++ usbd_device_event_irq (device, DEVICE_INIT, 0); ++ ++ /* The DEVICE_CREATE event puts the USB device in the state ++ * STATE_ATTACHED. ++ */ ++ usbd_device_event_irq (device, DEVICE_CREATE, 0); ++ ++ /* Some USB controller driver implementations signal ++ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here. ++ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED, ++ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT. ++ * The OMAP USB client controller has the capability to detect when the ++ * USB cable is connected to a powered USB bus via the ATT bit in the ++ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and ++ * DEVICE_RESET events until later. ++ */ ++ ++ /* The GTA01 can detect usb device attachment, but we just assume being ++ * attached for now (go to STATE_POWERED) */ ++ usbd_device_event_irq (device, DEVICE_HUB_CONFIGURED, 0); ++ ++ udc_enable (device); ++} ++ ++void udc_set_nak(int epid) ++{ ++ /* FIXME: implement this */ ++} ++ ++void udc_unset_nak(int epid) ++{ ++ /* FIXME: implement this */ ++} ++ ++#endif /* CONFIG_S3C2410 && CONFIG_USB_DEVICE */ +Index: u-boot/drivers/usbdcore_s3c2410.h +=================================================================== +--- /dev/null ++++ u-boot/drivers/usbdcore_s3c2410.h +@@ -0,0 +1,273 @@ ++/* linux/include/asm/arch-s3c2410/regs-udc.h ++ * ++ * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> ++ * ++ * This include file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * Changelog: ++ * 01-08-2004 Initial creation ++ * 12-09-2004 Cleanup for submission ++ * 24-10-2004 Fixed S3C2410_UDC_MAXP_REG definition ++ * 10-03-2005 Changed S3C2410_VA to S3C24XX_VA ++ * 10-01-2007 Modify for u-boot ++ */ ++ ++#ifndef __ASM_ARCH_REGS_UDC_H ++#define __ASM_ARCH_REGS_UDC_H ++ ++#define S3C2410_UDC_REG_BASE_PHYS 0x52000000 ++#define S3C2410_UDC_NUM_ENDPOINTS 5 ++ ++#define S3C2410_USBDREG(x) (x + S3C2410_UDC_REG_BASE_PHYS) ++ ++#define S3C2410_UDC_FUNC_ADDR_REG S3C2410_USBDREG(0x0140) ++#define S3C2410_UDC_PWR_REG S3C2410_USBDREG(0x0144) ++#define S3C2410_UDC_EP_INT_REG S3C2410_USBDREG(0x0148) ++ ++#define S3C2410_UDC_USB_INT_REG S3C2410_USBDREG(0x0158) ++#define S3C2410_UDC_EP_INT_EN_REG S3C2410_USBDREG(0x015c) ++ ++#define S3C2410_UDC_USB_INT_EN_REG S3C2410_USBDREG(0x016c) ++ ++#define S3C2410_UDC_FRAME_NUM1_REG S3C2410_USBDREG(0x0170) ++#define S3C2410_UDC_FRAME_NUM2_REG S3C2410_USBDREG(0x0174) ++ ++#define S3C2410_UDC_EP0_FIFO_REG S3C2410_USBDREG(0x01c0) ++#define S3C2410_UDC_EP1_FIFO_REG S3C2410_USBDREG(0x01c4) ++#define S3C2410_UDC_EP2_FIFO_REG S3C2410_USBDREG(0x01c8) ++#define S3C2410_UDC_EP3_FIFO_REG S3C2410_USBDREG(0x01cc) ++#define S3C2410_UDC_EP4_FIFO_REG S3C2410_USBDREG(0x01d0) ++ ++#define S3C2410_UDC_EP1_DMA_CON S3C2410_USBDREG(0x0200) ++#define S3C2410_UDC_EP1_DMA_UNIT S3C2410_USBDREG(0x0204) ++#define S3C2410_UDC_EP1_DMA_FIFO S3C2410_USBDREG(0x0208) ++#define S3C2410_UDC_EP1_DMA_TTC_L S3C2410_USBDREG(0x020c) ++#define S3C2410_UDC_EP1_DMA_TTC_M S3C2410_USBDREG(0x0210) ++#define S3C2410_UDC_EP1_DMA_TTC_H S3C2410_USBDREG(0x0214) ++ ++#define S3C2410_UDC_EP2_DMA_CON S3C2410_USBDREG(0x0218) ++#define S3C2410_UDC_EP2_DMA_UNIT S3C2410_USBDREG(0x021c) ++#define S3C2410_UDC_EP2_DMA_FIFO S3C2410_USBDREG(0x0220) ++#define S3C2410_UDC_EP2_DMA_TTC_L S3C2410_USBDREG(0x0224) ++#define S3C2410_UDC_EP2_DMA_TTC_M S3C2410_USBDREG(0x0228) ++#define S3C2410_UDC_EP2_DMA_TTC_H S3C2410_USBDREG(0x022c) ++ ++#define S3C2410_UDC_EP3_DMA_CON S3C2410_USBDREG(0x0240) ++#define S3C2410_UDC_EP3_DMA_UNIT S3C2410_USBDREG(0x0244) ++#define S3C2410_UDC_EP3_DMA_FIFO S3C2410_USBDREG(0x0248) ++#define S3C2410_UDC_EP3_DMA_TTC_L S3C2410_USBDREG(0x024c) ++#define S3C2410_UDC_EP3_DMA_TTC_M S3C2410_USBDREG(0x0250) ++#define S3C2410_UDC_EP3_DMA_TTC_H S3C2410_USBDREG(0x0254) ++ ++#define S3C2410_UDC_EP4_DMA_CON S3C2410_USBDREG(0x0258) ++#define S3C2410_UDC_EP4_DMA_UNIT S3C2410_USBDREG(0x025c) ++#define S3C2410_UDC_EP4_DMA_FIFO S3C2410_USBDREG(0x0260) ++#define S3C2410_UDC_EP4_DMA_TTC_L S3C2410_USBDREG(0x0264) ++#define S3C2410_UDC_EP4_DMA_TTC_M S3C2410_USBDREG(0x0268) ++#define S3C2410_UDC_EP4_DMA_TTC_H S3C2410_USBDREG(0x026c) ++ ++#define S3C2410_UDC_INDEX_REG S3C2410_USBDREG(0x0178) ++ ++/* indexed registers */ ++ ++#define S3C2410_UDC_MAXP_REG S3C2410_USBDREG(0x0180) ++ ++#define S3C2410_UDC_EP0_CSR_REG S3C2410_USBDREG(0x0184) ++ ++#define S3C2410_UDC_IN_CSR1_REG S3C2410_USBDREG(0x0184) ++#define S3C2410_UDC_IN_CSR2_REG S3C2410_USBDREG(0x0188) ++ ++#define S3C2410_UDC_OUT_CSR1_REG S3C2410_USBDREG(0x0190) ++#define S3C2410_UDC_OUT_CSR2_REG S3C2410_USBDREG(0x0194) ++#define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) ++#define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) ++ ++ ++ ++#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W ++#define S3C2410_UDC_PWR_RESET (1<<3) // R ++#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W ++#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R ++#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W ++ ++#define S3C2410_UDC_PWR_DEFAULT 0x00 ++ ++#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) ++#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) ++#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) ++#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) ++#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) ++ ++#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) ++#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) ++#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) ++ ++#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W ++#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W ++#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W ++#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W ++#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W ++ ++#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W ++#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W ++ ++ ++#define S3C2410_UDC_INDEX_EP0 (0x00) ++#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? ++#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? ++#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? ++#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? ++ ++#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W ++#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) ++#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W ++#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) ++#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) ++#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) ++ ++#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W ++#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W ++#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W ++#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W ++ ++#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W ++#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) ++#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W ++#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W ++#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R ++#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) ++#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) ++ ++#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W ++#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W ++#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W ++ ++#define S3C2410_UDC_SETIX(X) writel(X, S3C2410_UDC_INDEX_REG) ++ ++#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) ++#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) ++#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) ++#define S3C2410_UDC_EP0_CSR_DE (1<<3) ++#define S3C2410_UDC_EP0_CSR_SE (1<<4) ++#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) ++#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) ++#define S3C2410_UDC_EP0_CSR_SSE (1<<7) ++ ++#define S3C2410_UDC_MAXP_8 (1<<0) ++#define S3C2410_UDC_MAXP_16 (1<<1) ++#define S3C2410_UDC_MAXP_32 (1<<2) ++#define S3C2410_UDC_MAXP_64 (1<<3) ++ ++/****************** MACROS ******************/ ++#define BIT_MASK 0xFF ++ ++#if 1 ++#define maskl(v,m,a) \ ++ writel((readl(a) & ~(m))|((v)&(m)), (a)) ++#else ++#define maskl(v,m,a) do { \ ++ unsigned long foo = readl(a); \ ++ unsigned long bar = (foo & ~(m)) | ((v)&(m)); \ ++ serial_printf("0x%08x:0x%x->0x%x\n", (a), foo, bar); \ ++ writel(bar, (a)); \ ++} while(0) ++#endif ++ ++#define clear_ep0_sst() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ writel(0x00, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define clear_ep0_se() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl(S3C2410_UDC_EP0_CSR_SSE, \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define clear_ep0_opr() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl(S3C2410_UDC_EP0_CSR_SOPKTRDY, \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define set_ep0_ipr() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl(S3C2410_UDC_EP0_CSR_IPKRDY, \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define set_ep0_de() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl(S3C2410_UDC_EP0_CSR_DE, \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define set_ep0_ss() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl(S3C2410_UDC_EP0_CSR_SENDSTL, \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define set_ep0_de_out() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY \ ++ | S3C2410_UDC_EP0_CSR_DE), \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define set_ep0_sse_out() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl((S3C2410_UDC_EP0_CSR_SOPKTRDY \ ++ | S3C2410_UDC_EP0_CSR_SSE), \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++#define set_ep0_de_in() do { \ ++ S3C2410_UDC_SETIX(0); \ ++ maskl((S3C2410_UDC_EP0_CSR_IPKRDY \ ++ | S3C2410_UDC_EP0_CSR_DE), \ ++ BIT_MASK, S3C2410_UDC_EP0_CSR_REG); \ ++} while(0) ++ ++ ++#if 0 ++ ++#define clear_stall_ep1_out(base) do { \ ++ S3C2410_UDC_SETIX(base,EP1); \ ++ orl(0,base+S3C2410_UDC_OUT_CSR1_REG); \ ++} while(0) ++ ++ ++#define clear_stall_ep2_out(base) do { \ ++ S3C2410_UDC_SETIX(base,EP2); \ ++ orl(0, base+S3C2410_UDC_OUT_CSR1_REG); \ ++} while(0) ++ ++ ++#define clear_stall_ep3_out(base) do { \ ++ S3C2410_UDC_SETIX(base,EP3); \ ++ orl(0,base+S3C2410_UDC_OUT_CSR1_REG); \ ++} while(0) ++ ++ ++#define clear_stall_ep4_out(base) do { \ ++ S3C2410_UDC_SETIX(base,EP4); \ ++ orl(0, base+S3C2410_UDC_OUT_CSR1_REG); \ ++} while(0) ++ ++#endif ++ ++/* S3C2410 Endpoint parameters */ ++#define EP0_MAX_PACKET_SIZE 16 ++#define UDC_OUT_ENDPOINT 2 ++#define UDC_OUT_PACKET_SIZE 64 ++#define UDC_IN_ENDPOINT 1 ++#define UDC_IN_PACKET_SIZE 64 ++#define UDC_INT_ENDPOINT 5 ++#define UDC_INT_PACKET_SIZE 16 ++#define UDC_BULK_PACKET_SIZE 16 ++ ++#endif +Index: u-boot/drivers/usbdcore_ep0.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_ep0.c ++++ u-boot/drivers/usbdcore_ep0.c +@@ -43,7 +43,7 @@ + + #include <common.h> + +-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE) ++#if defined(CONFIG_USB_DEVICE) + #include "usbdcore.h" + + #if 0 +@@ -187,9 +187,13 @@ + if (!urb || !urb->buffer || !urb->buffer_length + || (urb->buffer_length < 255)) { + dbg_ep0 (2, "invalid urb %p", urb); ++ serial_printf("invalid urb %p", urb); + return -1L; + } + ++ /* re-initialize the ep0 buffer pointer */ ++ urb->buffer = (u8 *) urb->buffer_data; ++ + /* setup tx urb */ + urb->actual_length = 0; + cp = urb->buffer; +@@ -206,17 +210,8 @@ + usbd_device_device_descriptor (device, port))) { + return -1; + } +- /* copy descriptor for this device */ +- copy_config (urb, device_descriptor, +- sizeof (struct usb_device_descriptor), +- max); +- +- /* correct the correct control endpoint 0 max packet size into the descriptor */ +- device_descriptor = +- (struct usb_device_descriptor *) urb->buffer; +- device_descriptor->bMaxPacketSize0 = +- urb->device->bus->maxpacketsize; +- ++ urb->buffer = device_descriptor; ++ urb->actual_length = MIN(sizeof(*device_descriptor), max); + } + /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */ + break; +@@ -250,11 +245,9 @@ + index); + return -1; + } +- copy_config (urb, configuration_descriptor, +- sizeof (struct +- usb_configuration_descriptor), +- max); +- ++ urb->buffer = configuration_descriptor; ++ urb->actual_length = ++ MIN(le16_to_cpu(configuration_descriptor->wTotalLength), max); + } + break; + +@@ -376,6 +369,7 @@ + dbg_ep0 (0, "entering ep0_recv_setup()"); + if (!urb || !urb->device) { + dbg_ep0 (3, "invalid URB %p", urb); ++ serial_printf("invalid URB %p", urb); + return -1; + } + +@@ -400,6 +394,7 @@ + return device->cdc_recv_setup(request, urb); + dbg_ep0 (1, "non standard request: %x", + request->bmRequestType & USB_REQ_TYPE_MASK); ++ serial_printf("non standard request: %x", request->bmRequestType & USB_REQ_TYPE_MASK); + return -1; /* Stall here */ + } + +@@ -448,6 +443,8 @@ + dbg_ep0 (1, "request %s not allowed in UNKNOWN state: %s", + USBD_DEVICE_REQUESTS (request->bRequest), + usbd_device_states[device->device_state]); ++ serial_printf("request %s not allowed in UNKNOWN state: %s", USBD_DEVICE_REQUESTS (request->bRequest), usbd_device_states[device->device_state]); ++ break; + return -1; + } + +@@ -545,7 +542,8 @@ + /*dbg_ep0(2, "address: %d %d %d", */ + /* request->wValue, le16_to_cpu(request->wValue), device->address); */ + +- serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n"); ++ //serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n"); ++ //udc_set_address(device->address); + return 0; + + case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */ +Index: u-boot/include/configs/neo1973_gta01.h +=================================================================== +--- u-boot.orig/include/configs/neo1973_gta01.h ++++ u-boot/include/configs/neo1973_gta01.h +@@ -173,6 +173,16 @@ + #define CONFIG_USB_OHCI 1 + #endif + ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc" ++#define CONFIG_USBD_PRODUCT_NAME "Neo1973 Bootloader " U_BOOT_VERSION ++#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" ++ + /*----------------------------------------------------------------------- + * Physical Memory Map + */ +Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c ++++ u-boot/cpu/arm920t/s3c24x0/interrupts.c +@@ -222,6 +222,13 @@ + S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT(); + u_int32_t intpnd = irq->INTPND; + ++#ifdef CONFIG_USB_DEVICE ++ if (intpnd & BIT_USBD) { ++ s3c2410_udc_irq(); ++ irq->SRCPND = BIT_USBD; ++ irq->INTPND = BIT_USBD; ++ } ++#endif /* USB_DEVICE */ + } + #endif /* USE_IRQ */ + +Index: u-boot/drivers/usbtty.h +=================================================================== +--- u-boot.orig/drivers/usbtty.h ++++ u-boot/drivers/usbtty.h +@@ -29,6 +29,8 @@ + #include "usbdcore_mpc8xx.h" + #elif defined(CONFIG_OMAP1510) + #include "usbdcore_omap1510.h" ++#elif defined(CONFIG_S3C2410) ++#include "usbdcore_s3c2410.h" + #endif + + #include <config.h> +Index: u-boot/board/neo1973/common/cmd_neo1973.c +=================================================================== +--- u-boot.orig/board/neo1973/common/cmd_neo1973.c ++++ u-boot/board/neo1973/common/cmd_neo1973.c +@@ -72,6 +72,18 @@ + neo1973_vibrator(1); + else + neo1973_vibrator(0); ++ } else if (!strcmp(argv[1], "udc")) { ++ if (argc < 3) ++ goto out_help; ++ if (!strcmp(argv[2], "udc")) { ++ if (argc < 4) ++ goto out_help; ++ if (!strcmp(argv[3], "on")) ++ udc_connect(); ++ else ++ udc_disconnect(); ++ } else ++ goto out_help; + } else { + out_help: + printf("Usage:\n%s\n", cmdtp->usage); +@@ -95,5 +107,6 @@ + "neo1973 charger off - disable charging\n" + "neo1973 backlight (on|off) - switch backlight on or off\n" + "neo1973 vibrator (on|off) - switch vibrator on or off\n" ++ "neo1973 udc pullup (on|off) - switch pull-up on or off\n" + ); + #endif /* CFG_CMD_BDI */ +Index: u-boot/board/neo1973/gta01/Makefile +=================================================================== +--- u-boot.orig/board/neo1973/gta01/Makefile ++++ u-boot/board/neo1973/gta01/Makefile +@@ -25,7 +25,7 @@ + + LIB = lib$(BOARD).a + +-OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ++OBJS := gta01.o pcf50606.o ../common/cmd_neo1973.o ../common/jbt6k74.o ../common/udc.o + SOBJS := ../common/lowlevel_init.o + + $(LIB): $(OBJS) $(SOBJS) +Index: u-boot/board/neo1973/common/udc.c +=================================================================== +--- /dev/null ++++ u-boot/board/neo1973/common/udc.c +@@ -0,0 +1,23 @@ ++ ++#include <common.h> ++#include <usbdcore.h> ++#include <s3c2410.h> ++ ++void udc_ctrl(enum usbd_event event, int param) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ switch (event) { ++ case UDC_CTRL_PULLUP_ENABLE: ++#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2) || \ ++ defined(CONFIG_ARCH_GTA01B_v3) || defined(CONFIG_ARCH_GTA01B_v4) ++ if (param) ++ gpio->GPBDAT |= (1 << 9); ++ else ++ gpio->GPBDAT &= ~(1 << 9); ++#endif ++ break; ++ default: ++ break; ++ } ++} +Index: u-boot/include/usbdcore.h +=================================================================== +--- u-boot.orig/include/usbdcore.h ++++ u-boot/include/usbdcore.h +@@ -671,4 +671,10 @@ + void usbd_rcv_complete(struct usb_endpoint_instance *endpoint, int len, int urb_bad); + void usbd_tx_complete (struct usb_endpoint_instance *endpoint); + ++enum usbd_event { ++ UDC_CTRL_PULLUP_ENABLE, ++}; ++ ++void udc_ctrl(enum usbd_event event, int param); ++#endif + #endif diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2440.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2440.patch new file mode 100644 index 0000000000..da0fb8cf2d --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2440.patch @@ -0,0 +1,1301 @@ +Add proper support for S3C2440 CPU's + +Index: u-boot/include/s3c24x0.h +=================================================================== +--- u-boot.orig/include/s3c24x0.h ++++ u-boot/include/s3c24x0.h +@@ -82,7 +82,7 @@ + S3C24X0_REG32 PRIORITY; + S3C24X0_REG32 INTPND; + S3C24X0_REG32 INTOFFSET; +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + S3C24X0_REG32 SUBSRCPND; + S3C24X0_REG32 INTSUBMSK; + #endif +@@ -92,11 +92,11 @@ + /* DMAS (see manual chapter 8) */ + typedef struct { + S3C24X0_REG32 DISRC; +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + S3C24X0_REG32 DISRCC; + #endif + S3C24X0_REG32 DIDST; +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + S3C24X0_REG32 DIDSTC; + #endif + S3C24X0_REG32 DCON; +@@ -107,7 +107,7 @@ + #ifdef CONFIG_S3C2400 + S3C24X0_REG32 res[1]; + #endif +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + S3C24X0_REG32 res[7]; + #endif + } /*__attribute__((__packed__))*/ S3C24X0_DMA; +@@ -126,6 +126,9 @@ + S3C24X0_REG32 CLKCON; + S3C24X0_REG32 CLKSLOW; + S3C24X0_REG32 CLKDIVN; ++#ifdef CONFIG_S3C2440 ++ S3C24X0_REG32 CAMDIVN; ++#endif + } /*__attribute__((__packed__))*/ S3C24X0_CLOCK_POWER; + + +@@ -145,7 +148,7 @@ + S3C24X0_REG32 res[8]; + S3C24X0_REG32 DITHMODE; + S3C24X0_REG32 TPAL; +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + S3C24X0_REG32 LCDINTPND; + S3C24X0_REG32 LCDSRCPND; + S3C24X0_REG32 LCDINTMSK; +@@ -157,6 +160,9 @@ + /* NAND FLASH (see S3C2410 manual chapter 6) */ + typedef struct { + S3C24X0_REG32 NFCONF; ++#ifdef CONFIG_S3C2440 ++ S3C24X0_REG32 NFCONT; ++#endif + S3C24X0_REG32 NFCMD; + S3C24X0_REG32 NFADDR; + S3C24X0_REG32 NFDATA; +@@ -164,6 +170,15 @@ + S3C24X0_REG32 NFECC; + } /*__attribute__((__packed__))*/ S3C2410_NAND; + ++/* NAND FLASH (see S3C2440 manual chapter 6) */ ++typedef struct { ++ S3C24X0_REG32 NFCONF; ++ S3C24X0_REG32 NFCMD; ++ S3C24X0_REG32 NFADDR; ++ S3C24X0_REG32 NFDATA; ++ S3C24X0_REG32 NFSTAT; ++ S3C24X0_REG32 NFECC; ++} /*__attribute__((__packed__))*/ S3C2440_NAND; + + /* UART (see manual chapter 11) */ + typedef struct { +@@ -451,6 +466,65 @@ + S3C24X0_REG32 GSTATUS3; + S3C24X0_REG32 GSTATUS4; + #endif ++#ifdef CONFIG_S3C2440 ++ S3C24X0_REG32 GPACON; ++ S3C24X0_REG32 GPADAT; ++ S3C24X0_REG32 res1[2]; ++ S3C24X0_REG32 GPBCON; ++ S3C24X0_REG32 GPBDAT; ++ S3C24X0_REG32 GPBUP; ++ S3C24X0_REG32 res2; ++ S3C24X0_REG32 GPCCON; ++ S3C24X0_REG32 GPCDAT; ++ S3C24X0_REG32 GPCUP; ++ S3C24X0_REG32 res3; ++ S3C24X0_REG32 GPDCON; ++ S3C24X0_REG32 GPDDAT; ++ S3C24X0_REG32 GPDUP; ++ S3C24X0_REG32 res4; ++ S3C24X0_REG32 GPECON; ++ S3C24X0_REG32 GPEDAT; ++ S3C24X0_REG32 GPEUP; ++ S3C24X0_REG32 res5; ++ S3C24X0_REG32 GPFCON; ++ S3C24X0_REG32 GPFDAT; ++ S3C24X0_REG32 GPFUP; ++ S3C24X0_REG32 res6; ++ S3C24X0_REG32 GPGCON; ++ S3C24X0_REG32 GPGDAT; ++ S3C24X0_REG32 GPGUP; ++ S3C24X0_REG32 res7; ++ S3C24X0_REG32 GPHCON; ++ S3C24X0_REG32 GPHDAT; ++ S3C24X0_REG32 GPHUP; ++ S3C24X0_REG32 res8; ++ ++ S3C24X0_REG32 MISCCR; ++ S3C24X0_REG32 DCLKCON; ++ S3C24X0_REG32 EXTINT0; ++ S3C24X0_REG32 EXTINT1; ++ S3C24X0_REG32 EXTINT2; ++ S3C24X0_REG32 EINTFLT0; ++ S3C24X0_REG32 EINTFLT1; ++ S3C24X0_REG32 EINTFLT2; ++ S3C24X0_REG32 EINTFLT3; ++ S3C24X0_REG32 EINTMASK; ++ S3C24X0_REG32 EINTPEND; ++ S3C24X0_REG32 GSTATUS0; ++ S3C24X0_REG32 GSTATUS1; ++ S3C24X0_REG32 GSTATUS2; ++ S3C24X0_REG32 GSTATUS3; ++ S3C24X0_REG32 GSTATUS4; ++ ++ S3C24X0_REG32 res9; ++ S3C24X0_REG32 DSC0; ++ S3C24X0_REG32 DSC1; ++ S3C24X0_REG32 MSLCON; ++ S3C24X0_REG32 GPJCON; ++ S3C24X0_REG32 GPJDAT; ++ S3C24X0_REG32 GPJUP; ++ S3C24X0_REG32 res10; ++#endif + } /*__attribute__((__packed__))*/ S3C24X0_GPIO; + + +@@ -637,8 +711,13 @@ + S3C24X0_REG32 SDIDCNT; + S3C24X0_REG32 SDIDSTA; + S3C24X0_REG32 SDIFSTA; ++#if defined(CONFIG_S3C2410) + S3C24X0_REG32 SDIDAT; + S3C24X0_REG32 SDIIMSK; ++#elif defined(CONFIG_S3C2440) ++ S3C24X0_REG32 SDIIMSK; ++ S3C24X0_REG32 SDIDAT; ++#endif + } /*__attribute__((__packed__))*/ S3C2410_SDI; + + +Index: u-boot/rtc/s3c24x0_rtc.c +=================================================================== +--- u-boot.orig/rtc/s3c24x0_rtc.c ++++ u-boot/rtc/s3c24x0_rtc.c +@@ -34,6 +34,8 @@ + #include <s3c2400.h> + #elif defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> + #endif + + #include <rtc.h> +Index: u-boot/include/s3c2440.h +=================================================================== +--- /dev/null ++++ u-boot/include/s3c2440.h +@@ -0,0 +1,300 @@ ++/* ++ * (C) Copyright 2003 ++ * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++/************************************************ ++ * NAME : s3c2440.h ++ * Version : 2007. ++ * ++ * Based on S3C2410X User's manual Rev 1.1 ++ ************************************************/ ++ ++#ifndef __S3C2440_H__ ++#define __S3C2440_H__ ++ ++#define S3C24X0_UART_CHANNELS 3 ++#define S3C24X0_SPI_CHANNELS 2 ++ ++/* S3C2440 only supports 512 Byte HW ECC */ ++#define S3C2440_ECCSIZE 512 ++#define S3C2440_ECCBYTES 3 ++ ++/* S3C2440 device base addresses */ ++#define S3C24X0_MEMCTL_BASE 0x48000000 ++#define S3C24X0_USB_HOST_BASE 0x49000000 ++#define S3C24X0_INTERRUPT_BASE 0x4A000000 ++#define S3C24X0_DMA_BASE 0x4B000000 ++#define S3C24X0_CLOCK_POWER_BASE 0x4C000000 ++#define S3C24X0_LCD_BASE 0x4D000000 ++#define S3C2440_NAND_BASE 0x4E000000 ++#define S3C24X0_UART_BASE 0x50000000 ++#define S3C24X0_TIMER_BASE 0x51000000 ++#define S3C24X0_USB_DEVICE_BASE 0x52000140 ++#define USB_DEVICE_PHYS_ADR 0x52000000 ++#define S3C24X0_WATCHDOG_BASE 0x53000000 ++#define S3C24X0_I2C_BASE 0x54000000 ++#define S3C24X0_I2S_BASE 0x55000000 ++#define S3C24X0_GPIO_BASE 0x56000000 ++#define S3C24X0_RTC_BASE 0x57000000 ++#define S3C2440_ADC_BASE 0x58000000 ++#define S3C24X0_SPI_BASE 0x59000000 ++#define S3C2440_SDI_BASE 0x5A000000 ++ ++#define oNFCONF 0x00 ++#define oNFCONT 0x04 ++ ++#ifndef __ASSEMBLER__ ++ ++/* include common stuff */ ++#include <s3c24x0.h> ++ ++typedef enum { ++ S3C24X0_UART0, ++ S3C24X0_UART1, ++ S3C24X0_UART2 ++} S3C24X0_UARTS_NR; ++ ++static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) ++{ ++ return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; ++} ++static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void) ++{ ++ return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; ++} ++static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void) ++{ ++ return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; ++} ++static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void) ++{ ++ return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; ++} ++static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void) ++{ ++ return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; ++} ++static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void) ++{ ++ return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; ++} ++static inline S3C2440_NAND * S3C2440_GetBase_NAND(void) ++{ ++ return (S3C2440_NAND * const)S3C2440_NAND_BASE; ++} ++static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) ++{ ++ return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); ++} ++static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void) ++{ ++ return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; ++} ++static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void) ++{ ++ return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; ++} ++static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void) ++{ ++ return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; ++} ++static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void) ++{ ++ return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; ++} ++static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void) ++{ ++ return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; ++} ++static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void) ++{ ++ return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; ++} ++static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void) ++{ ++ return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; ++} ++/* ++static inline S3C2440_ADC * S3C2440_GetBase_ADC(void) ++{ ++ return (S3C2440_ADC * const)S3C2440_ADC_BASE; ++} ++static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void) ++{ ++ return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; ++} ++*/ ++static inline S3C2410_SDI * S3C2410_GetBase_SDI(void) ++{ ++ return (S3C2410_SDI * const)S3C2440_SDI_BASE; ++} ++ ++#endif /* __ASSEMBLER__ */ ++ ++/* ISR */ ++#define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0)) ++#define pISR_UNDEF (*(unsigned *)(_ISR_STARTADDRESS+0x4)) ++#define pISR_SWI (*(unsigned *)(_ISR_STARTADDRESS+0x8)) ++#define pISR_PABORT (*(unsigned *)(_ISR_STARTADDRESS+0xC)) ++#define pISR_DABORT (*(unsigned *)(_ISR_STARTADDRESS+0x10)) ++#define pISR_RESERVED (*(unsigned *)(_ISR_STARTADDRESS+0x14)) ++#define pISR_IRQ (*(unsigned *)(_ISR_STARTADDRESS+0x18)) ++#define pISR_FIQ (*(unsigned *)(_ISR_STARTADDRESS+0x1C)) ++ ++#define pISR_EINT0 (*(unsigned *)(_ISR_STARTADDRESS+0x20)) ++#define pISR_EINT1 (*(unsigned *)(_ISR_STARTADDRESS+0x24)) ++#define pISR_EINT2 (*(unsigned *)(_ISR_STARTADDRESS+0x28)) ++#define pISR_EINT3 (*(unsigned *)(_ISR_STARTADDRESS+0x2C)) ++#define pISR_EINT4_7 (*(unsigned *)(_ISR_STARTADDRESS+0x30)) ++#define pISR_EINT8_23 (*(unsigned *)(_ISR_STARTADDRESS+0x34)) ++#define pISR_BAT_FLT (*(unsigned *)(_ISR_STARTADDRESS+0x3C)) ++#define pISR_TICK (*(unsigned *)(_ISR_STARTADDRESS+0x40)) ++#define pISR_WDT (*(unsigned *)(_ISR_STARTADDRESS+0x44)) ++#define pISR_TIMER0 (*(unsigned *)(_ISR_STARTADDRESS+0x48)) ++#define pISR_TIMER1 (*(unsigned *)(_ISR_STARTADDRESS+0x4C)) ++#define pISR_TIMER2 (*(unsigned *)(_ISR_STARTADDRESS+0x50)) ++#define pISR_TIMER3 (*(unsigned *)(_ISR_STARTADDRESS+0x54)) ++#define pISR_TIMER4 (*(unsigned *)(_ISR_STARTADDRESS+0x58)) ++#define pISR_UART2 (*(unsigned *)(_ISR_STARTADDRESS+0x5C)) ++#define pISR_NOTUSED (*(unsigned *)(_ISR_STARTADDRESS+0x60)) ++#define pISR_DMA0 (*(unsigned *)(_ISR_STARTADDRESS+0x64)) ++#define pISR_DMA1 (*(unsigned *)(_ISR_STARTADDRESS+0x68)) ++#define pISR_DMA2 (*(unsigned *)(_ISR_STARTADDRESS+0x6C)) ++#define pISR_DMA3 (*(unsigned *)(_ISR_STARTADDRESS+0x70)) ++#define pISR_SDI (*(unsigned *)(_ISR_STARTADDRESS+0x74)) ++#define pISR_SPI0 (*(unsigned *)(_ISR_STARTADDRESS+0x78)) ++#define pISR_UART1 (*(unsigned *)(_ISR_STARTADDRESS+0x7C)) ++#define pISR_USBD (*(unsigned *)(_ISR_STARTADDRESS+0x84)) ++#define pISR_USBH (*(unsigned *)(_ISR_STARTADDRESS+0x88)) ++#define pISR_IIC (*(unsigned *)(_ISR_STARTADDRESS+0x8C)) ++#define pISR_UART0 (*(unsigned *)(_ISR_STARTADDRESS+0x90)) ++#define pISR_SPI1 (*(unsigned *)(_ISR_STARTADDRESS+0x94)) ++#define pISR_RTC (*(unsigned *)(_ISR_STARTADDRESS+0x98)) ++#define pISR_ADC (*(unsigned *)(_ISR_STARTADDRESS+0xA0)) ++ ++ ++/* PENDING BIT */ ++#define BIT_EINT0 (0x1) ++#define BIT_EINT1 (0x1<<1) ++#define BIT_EINT2 (0x1<<2) ++#define BIT_EINT3 (0x1<<3) ++#define BIT_EINT4_7 (0x1<<4) ++#define BIT_EINT8_23 (0x1<<5) ++#define BIT_BAT_FLT (0x1<<7) ++#define BIT_TICK (0x1<<8) ++#define BIT_WDT (0x1<<9) ++#define BIT_TIMER0 (0x1<<10) ++#define BIT_TIMER1 (0x1<<11) ++#define BIT_TIMER2 (0x1<<12) ++#define BIT_TIMER3 (0x1<<13) ++#define BIT_TIMER4 (0x1<<14) ++#define BIT_UART2 (0x1<<15) ++#define BIT_LCD (0x1<<16) ++#define BIT_DMA0 (0x1<<17) ++#define BIT_DMA1 (0x1<<18) ++#define BIT_DMA2 (0x1<<19) ++#define BIT_DMA3 (0x1<<20) ++#define BIT_SDI (0x1<<21) ++#define BIT_SPI0 (0x1<<22) ++#define BIT_UART1 (0x1<<23) ++#define BIT_USBD (0x1<<25) ++#define BIT_USBH (0x1<<26) ++#define BIT_IIC (0x1<<27) ++#define BIT_UART0 (0x1<<28) ++#define BIT_SPI1 (0x1<<29) ++#define BIT_RTC (0x1<<30) ++#define BIT_ADC (0x1<<31) ++#define BIT_ALLMSK (0xFFFFFFFF) ++ ++#define ClearPending(bit) {\ ++ rSRCPND = bit;\ ++ rINTPND = bit;\ ++ rINTPND;\ ++ } ++/* Wait until rINTPND is changed for the case that the ISR is very short. */ ++ ++#define __REG(x) (*(volatile unsigned long *)(x)) ++#define __REGl(x) (*(volatile unsigned long *)(x)) ++#define __REGw(x) (*(volatile unsigned short *)(x)) ++#define __REGb(x) (*(volatile unsigned char *)(x)) ++#define __REG2(x,y) (*(volatile unsigned long *)((x) + (y))) ++ ++/* ++ * * Nand flash controller ++ * */ ++ ++#define NFDATA8 (*(volatile unsigned char *)0x4E000010) ++#define NFDATA16 (*(volatile unsigned short *)0x4E000010) ++#define NFDATA32 (*(volatile unsigned *)0x4E000010) ++ ++#define NFCONF __REG(0x4E000000) ++#define NFCONT __REG(0x4E000004) ++#define NFCMD __REG(0x4E000008) ++#define NFADDR __REGb(0x4E00000C) ++#define NFMECCD0 __REG(0x4E000014) ++#define NFMECCD1 __REG(0x4E000018) ++#define NFSECCD __REG(0x4E00001C) ++#define NFSTAT __REG(0x4E000020) ++#define NFESTAT0 __REG(0x4E000024) ++#define NFESTAT1 __REG(0x4E000028) ++#define NFMECC0 __REG(0x4E00002C) ++#define NFMECC1 __REG(0x4E000030) ++#define NFSECC __REG(0x4E000034) ++#define NFSBLK __REG(0x4E000038) ++ ++ ++#define S3C2410_MISCCR_USBDEV (0<<3) ++#define S3C2410_MISCCR_USBHOST (1<<3) ++ ++#define S3C2410_MISCCR_CLK0_MPLL (0<<4) ++#define S3C2410_MISCCR_CLK0_UPLL (1<<4) ++#define S3C2410_MISCCR_CLK0_FCLK (2<<4) ++#define S3C2410_MISCCR_CLK0_HCLK (3<<4) ++#define S3C2410_MISCCR_CLK0_PCLK (4<<4) ++#define S3C2410_MISCCR_CLK0_DCLK0 (5<<4) ++#define S3C2410_MISCCR_CLK0_MASK (7<<4) ++ ++#define S3C2410_MISCCR_CLK1_MPLL (0<<8) ++#define S3C2410_MISCCR_CLK1_UPLL (1<<8) ++#define S3C2410_MISCCR_CLK1_FCLK (2<<8) ++#define S3C2410_MISCCR_CLK1_HCLK (3<<8) ++#define S3C2410_MISCCR_CLK1_PCLK (4<<8) ++#define S3C2410_MISCCR_CLK1_DCLK1 (5<<8) ++#define S3C2410_MISCCR_CLK1_MASK (7<<8) ++ ++#define S3C2410_MISCCR_USBSUSPND0 (1<<12) ++#define S3C2410_MISCCR_USBSUSPND1 (1<<13) ++ ++#define S3C2410_MISCCR_nRSTCON (1<<16) ++ ++#define S3C2410_MISCCR_nEN_SCLK0 (1<<17) ++#define S3C2410_MISCCR_nEN_SCLK1 (1<<18) ++#define S3C2410_MISCCR_nEN_SCLKE (1<<19) ++#define S3C2410_MISCCR_SDSLEEP (7<<17) ++ ++#define S3C2410_CLKSLOW_UCLK_OFF (1<<7) ++#define S3C2410_CLKSLOW_MPLL_OFF (1<<5) ++#define S3C2410_CLKSLOW_SLOW (1<<4) ++#define S3C2410_CLKSLOW_SLOWVAL(x) (x) ++#define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) ++ ++#endif /*__S3C2440_H__*/ +Index: u-boot/include/common.h +=================================================================== +--- u-boot.orig/include/common.h ++++ u-boot/include/common.h +@@ -454,7 +454,7 @@ + ulong get_OPB_freq (void); + ulong get_PCI_freq (void); + #endif +-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) ++#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_LH7A40X) + void s3c2410_irq(void); + #define ARM920_IRQ_CALLBACK s3c2410_irq + ulong get_FCLK (void); +Index: u-boot/cpu/arm920t/s3c24x0/usb_ohci.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/usb_ohci.c ++++ u-boot/cpu/arm920t/s3c24x0/usb_ohci.c +@@ -44,6 +44,8 @@ + #include <s3c2400.h> + #elif defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> + #endif + + #include <malloc.h> +Index: u-boot/cpu/arm920t/s3c24x0/speed.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/speed.c ++++ u-boot/cpu/arm920t/s3c24x0/speed.c +@@ -30,12 +30,15 @@ + */ + + #include <common.h> +-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) ++#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ ++ defined (CONFIG_S3C2440) || defined (CONFIG_TRAB) + + #if defined(CONFIG_S3C2400) + #include <s3c2400.h> + #elif defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> + #endif + + #define MPLL 0 +@@ -66,8 +69,12 @@ + m = ((r & 0xFF000) >> 12) + 8; + p = ((r & 0x003F0) >> 4) + 2; + s = r & 0x3; +- ++#ifndef CONFIG_S3C2440 + return((CONFIG_SYS_CLK_FREQ * m) / (p << s)); ++#else ++ /* To avoid integer overflow, changed the calc order */ ++ return( 2 * m * (CONFIG_SYS_CLK_FREQ / (p << s )) ); ++#endif + } + + /* return FCLK frequency */ +@@ -81,7 +88,21 @@ + { + S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); + ++#ifndef CONFIG_S3C2440 + return((clk_power->CLKDIVN & 0x2) ? get_FCLK()/2 : get_FCLK()); ++#else ++ switch (clk_power->CLKDIVN & 0x6) { ++ case 0x0: ++ return get_FCLK(); ++ case 0x2: ++ return get_FCLK()/2; ++ case 0x4: ++ return (clk_power->CAMDIVN & 0x200) ? get_FCLK()/8 : get_FCLK()/4; ++ case 0x6: ++ return (clk_power->CAMDIVN & 0x100) ? get_FCLK()/6 : get_FCLK()/3; ++ } ++ return 0; ++#endif + } + + /* return PCLK frequency */ +@@ -98,4 +119,5 @@ + return(get_PLLCLK(UPLL)); + } + +-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ ++#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || ++ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */ +Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c ++++ u-boot/cpu/arm920t/s3c24x0/interrupts.c +@@ -30,13 +30,16 @@ + */ + + #include <common.h> +-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) ++#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ ++ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) + + #include <arm920t.h> + #if defined(CONFIG_S3C2400) + #include <s3c2400.h> + #elif defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> + #endif + + int timer_load_val = 0; +@@ -59,6 +62,7 @@ + /* use PWM Timer 4 because it has no output */ + /* prescaler for Timer 4 is 16 */ + timers->TCFG0 = 0x0f00; ++#ifndef CONFIG_S3C2440 + if (timer_load_val == 0) + { + /* +@@ -68,6 +72,9 @@ + */ + timer_load_val = get_PCLK()/(2 * 16 * 100); + } ++#else ++ timer_load_val = get_PCLK()/(2 * 16 * 100); ++#endif + /* load value for 10 ms timeout */ + lastdec = timers->TCNTB4 = timer_load_val; + /* auto load, manual update of Timer 4 */ +@@ -178,6 +185,7 @@ + tbclk = timer_load_val * 100; + #elif defined(CONFIG_SBC2410X) || \ + defined(CONFIG_SMDK2410) || \ ++ defined(CONFIG_SMDK2440) || \ + defined(CONFIG_VCMA9) + tbclk = CFG_HZ; + #else +@@ -232,4 +240,5 @@ + } + #endif /* USE_IRQ */ + +-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ ++#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || ++ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */ +Index: u-boot/cpu/arm920t/s3c24x0/serial.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/serial.c ++++ u-boot/cpu/arm920t/s3c24x0/serial.c +@@ -19,12 +19,15 @@ + */ + + #include <common.h> +-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) ++#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ ++ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) + + #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB) + #include <s3c2400.h> + #elif defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> + #endif + + DECLARE_GLOBAL_DATA_PTR; +@@ -180,4 +183,5 @@ + } + } + +-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */ ++#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || ++ defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) */ +Index: u-boot/cpu/arm920t/s3c24x0/i2c.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/i2c.c ++++ u-boot/cpu/arm920t/s3c24x0/i2c.c +@@ -34,6 +34,8 @@ + #include <s3c2400.h> + #elif defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> + #endif + #include <i2c.h> + +@@ -63,7 +65,7 @@ + { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + return (gpio->GPEDAT & 0x8000) >> 15; + #endif + #ifdef CONFIG_S3C2400 +@@ -82,7 +84,7 @@ + { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + gpio->GPEDAT = (gpio->GPEDAT & ~0x4000) | (x&1) << 14; + #endif + #ifdef CONFIG_S3C2400 +@@ -139,7 +141,7 @@ + } + + if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) { +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + ulong old_gpecon = gpio->GPECON; + #endif + #ifdef CONFIG_S3C2400 +@@ -147,7 +149,7 @@ + #endif + /* bus still busy probably by (most) previously interrupted transfer */ + +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */ + gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000; + #endif +@@ -171,7 +173,7 @@ + udelay (1000); + + /* restore pin functions */ +-#ifdef CONFIG_S3C2410 ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + gpio->GPECON = old_gpecon; + #endif + #ifdef CONFIG_S3C2400 +Index: u-boot/drivers/usbdcore_s3c2410.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_s3c2410.c ++++ u-boot/drivers/usbdcore_s3c2410.c +@@ -24,7 +24,7 @@ + + #include <config.h> + +-#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE) ++#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE) + + #include <common.h> + +Index: u-boot/drivers/usbtty.h +=================================================================== +--- u-boot.orig/drivers/usbtty.h ++++ u-boot/drivers/usbtty.h +@@ -29,7 +29,7 @@ + #include "usbdcore_mpc8xx.h" + #elif defined(CONFIG_OMAP1510) + #include "usbdcore_omap1510.h" +-#elif defined(CONFIG_S3C2410) ++#elif defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + #include "usbdcore_s3c2410.h" + #endif + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -31,7 +31,11 @@ + + #include <config.h> + #include <version.h> ++#if defined(CONFIG_S3C2410) + #include <s3c2410.h> ++#elif defined(CONFIG_S3C2440) ++#include <s3c2440.h> ++#endif + + + /* +@@ -142,14 +146,32 @@ + # define pWTCON 0x15300000 + # define INTMSK 0x14400008 /* Interupt-Controller base addresses */ + # define CLKDIVN 0x14800014 /* clock divisor register */ +-#elif defined(CONFIG_S3C2410) ++#elif defined(CONFIG_S3C2410) || defined (CONFIG_S3C2440) + # define pWTCON 0x53000000 + # define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ + # define INTSUBMSK 0x4A00001C + # define CLKDIVN 0x4C000014 /* clock divisor register */ + #endif + +-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) ++#if defined(CONFIG_S3C2410) ++# define INTSUBMSK_val 0x7ff ++# define MPLLCON_val ((0x90 << 12) + (0x7 << 4) + 0x0) /* 202 MHz */ ++# define UPLLCON_val ((0x78 << 12) + (0x2 << 4) + 0x3) ++# define CLKDIVN_val 3 /* FCLK:HCLK:PCLK = 1:2:4 */ ++#elif defined(CONFIG_S3C2440) ++# define INTSUBMSK_val 0xffff ++#if (CONFIG_SYS_CLK_FREQ == 16934400) ++# define MPLLCON_val ((0x61 << 12) + (0x1 << 4) + 0x2) /* 296.35 MHz */ ++# define UPLLCON_val ((0x3c << 12) + (0x4 << 4) + 0x2) /* 47.98 MHz */ ++#else if (CONFIG_SYS_CLK_FREQ == 12000000) ++# define MPLLCON_val ((0x44 << 12) + (0x1 << 4) + 0x1) /* 304.00 MHz */ ++# define UPLLCON_val ((0x38 << 12) + (0x2 << 4) + 0x2) /* 48.00 MHz */ ++#endif ++# define CLKDIVN_val 7 /* FCLK:HCLK:PCLK = 1:3:6 */ ++# define CAMDIVN 0x4C000018 ++#endif ++ ++#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + ldr r0, =pWTCON + mov r1, #0x0 + str r1, [r0] +@@ -160,24 +182,34 @@ + mov r1, #0xffffffff + ldr r0, =INTMSK + str r1, [r0] +-# if defined(CONFIG_S3C2410) +- ldr r1, =0x3ff ++# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) ++ ldr r1, =INTSUBMSK_val + ldr r0, =INTSUBMSK + str r1, [r0] + # endif + +- /* default FCLK is 202 MHz ! */ ++#if defined(CONFIG_S3C2440) ++ /* Make sure we get FCLK:HCLK:PCLK = 1:3:6 */ ++ ldr r0, =CAMDIVN ++ mov r1, #0 ++ str r1, [r0] ++#endif ++ ++ /* Clock asynchronous mode */ ++ mrc p15, 0, r1, c1, c0, 0 ++ orr r1, r1, #0xc0000000 ++ mcr p15, 0, r1, c1, c0, 0 ++ ++ + #define LOCKTIME 0x4c000000 + #define UPLLCON 0x4c000008 +-//#define MPLLCFG ((0x90 << 12) + (0x2 << 4) + 0x2) +-#define MPLLCFG ((0x90 << 12) + (0x7 << 4) + 0x0) +-#define UPLLCFG ((0x78 << 12) + (0x2 << 4) + 0x3) ++ + ldr r0, =LOCKTIME + mov r1, #0xffffff + str r1, [r0] + + ldr r0, =UPLLCON +- ldr r1, =UPLLCFG ++ ldr r1, =UPLLCON_val + str r1, [r0] + + /* Page 7-19, seven nops between UPLL and MPLL */ +@@ -189,12 +221,12 @@ + nop + nop + +- ldr r1, =MPLLCFG ++ ldr r1, =MPLLCON_val + str r1, [r0, #-4] /* MPLLCON */ + + /* FCLK:HCLK:PCLK = 1:2:4 */ + ldr r0, =CLKDIVN +- mov r1, #3 ++ mov r1, #CLKDIVN_val + str r1, [r0] + + #if 1 +@@ -222,7 +254,7 @@ + str r1, [r0, #0x28] + #endif + +-#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ ++#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */ + + #ifndef CONFIG_SKIP_LOWLEVEL_INIT + #ifndef CONFIG_LL_INIT_NAND_ONLY +@@ -279,7 +311,7 @@ + #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY) + bl cpu_init_crit + #endif +-#if defined(CONFIG_S3C2410) ++#if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) + /* ensure some refresh has happened */ + ldr r1, =0xfffff + 1: subs r1, r1, #1 +@@ -290,11 +322,12 @@ + ldr r0, [ r1 ] + tst r0, #0x02 /* is this resume from power down */ + ldrne pc, [r1, #4] /* gstatus3 */ +-#endif /* CONFIG_S3C2410 */ ++#endif /* CONFIG_S3C2410 || CONFIG_S3C2440 */ + #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + + /* mov r10, lr */ + ++#if defined(CONFIG_S3C2410) + @ reset NAND + mov r1, #S3C2410_NAND_BASE + ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0 +@@ -314,6 +347,17 @@ + ldr r2, [r1, #oNFCONF] + orr r2, r2, #0x800 @ disable chip + str r2, [r1, #oNFCONF] ++#elif defined(CONFIG_S3C2440) ++ mov r1, #S3C2440_NAND_BASE ++ ldr r2, =0xfff0 @ initial value tacls=3,rph0=7,rph1=7 ++ ldr r3, [r1, #oNFCONF] ++ orr r3, r3, r2 ++ str r3, [r1, #oNFCONF] ++ ++ ldr r3, [r1, #oNFCONT] ++ orr r3, r3, #1 @ enable nand controller ++ str r3, [r1, #oNFCONT] ++#endif + + #if 0 + @ get ready to call C functions (for nand_read()) +@@ -382,7 +426,7 @@ + #endif /* CONFIG_S3C2410_NAND_BOOT */ + done_relocate: + +-#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C2410) ++#if defined(CONFIG_USE_IRQ) && (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) + /* In the case of the S3C2410, if we've somehow magically (JTAG, ...) + ended up in RAM, then that ram is mapped to 0x30000000 and not 0. + So we need to copy the interrupt vectors, etc. */ +Index: u-boot/cpu/arm920t/s3c24x0/nand_read.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/nand_read.c ++++ u-boot/cpu/arm920t/s3c24x0/nand_read.c +@@ -16,30 +16,141 @@ + */ + + #include <common.h> ++#include <linux/mtd/nand.h> + + #ifdef CONFIG_S3C2410_NAND_BOOT + + #define __REGb(x) (*(volatile unsigned char *)(x)) ++#define __REGw(x) (*(volatile unsigned short *)(x)) + #define __REGi(x) (*(volatile unsigned int *)(x)) + #define NF_BASE 0x4e000000 ++#if defined(CONFIG_S3C2410) + #define NFCONF __REGi(NF_BASE + 0x0) + #define NFCMD __REGb(NF_BASE + 0x4) + #define NFADDR __REGb(NF_BASE + 0x8) + #define NFDATA __REGb(NF_BASE + 0xc) + #define NFSTAT __REGb(NF_BASE + 0x10) ++#define NFSTAT_BUSY 1 ++#define nand_select() (NFCONF &= ~0x800) ++#define nand_deselect() (NFCONF |= 0x800) ++#define nand_clear_RnB() do {} while (0) ++#elif defined(CONFIG_S3C2440) ++#define NFCONF __REGi(NF_BASE + 0x0) ++#define NFCONT __REGi(NF_BASE + 0x4) ++#define NFCMD __REGb(NF_BASE + 0x8) ++#define NFADDR __REGb(NF_BASE + 0xc) ++#define NFDATA __REGb(NF_BASE + 0x10) ++#define NFDATA16 __REGw(NF_BASE + 0x10) ++#define NFSTAT __REGb(NF_BASE + 0x20) ++#define NFSTAT_BUSY 1 ++#define nand_select() (NFCONT &= ~(1 << 1)) ++#define nand_deselect() (NFCONT |= (1 << 1)) ++#define nand_clear_RnB() (NFSTAT |= (1 << 2)) ++#endif + +-#define BUSY 1 +-inline void wait_idle(void) ++static inline void nand_wait(void) + { + int i; + +- while (!(NFSTAT & BUSY)) ++ while (!(NFSTAT & NFSTAT_BUSY)) + for (i=0; i<10; i++); + } + +-#define NAND_SECTOR_SIZE 512 +-#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1) +-#define NAND_PAGE_SIZE 0x4000 ++#if defined(CONFIG_S3C2410) ++/* configuration for 2410 with 512byte sized flash */ ++#define NAND_PAGE_SIZE 512 ++#define BAD_BLOCK_OFFSET 517 ++#define NAND_BLOCK_MASK (NAND_PAGE_SIZE - 1) ++#define NAND_BLOCK_SIZE 0x4000 ++#else ++/* configuration for 2440 with 2048byte sized flash */ ++#define NAND_5_ADDR_CYCLE ++#define NAND_PAGE_SIZE 2048 ++#define BAD_BLOCK_OFFSET NAND_PAGE_SIZE ++#define NAND_BLOCK_MASK (NAND_PAGE_SIZE - 1) ++#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE * 64) ++#endif ++ ++/* compile time failure in case of an invalid configuration */ ++#if defined(CONFIG_S3C2410) && (NAND_PAGE_SIZE != 512) ++#error "S3C2410 does not support nand page size != 512" ++#endif ++ ++static int is_bad_block(unsigned long i) ++{ ++ unsigned char data; ++ unsigned long page_num; ++ ++ /* FIXME: do this twice, for first and second page in block */ ++ ++ nand_clear_RnB(); ++#if (NAND_PAGE_SIZE == 512) ++ NFCMD = NAND_CMD_READOOB; /* 0x50 */ ++ NFADDR = BAD_BLOCK_OFFSET & 0xf; ++ NFADDR = (i >> 9) & 0xff; ++ NFADDR = (i >> 17) & 0xff; ++ NFADDR = (i >> 25) & 0xff; ++#elif (NAND_PAGE_SIZE == 2048) ++ page_num = i >> 11; /* addr / 2048 */ ++ NFCMD = NAND_CMD_READ0; ++ NFADDR = BAD_BLOCK_OFFSET & 0xff; ++ NFADDR = (BAD_BLOCK_OFFSET >> 8) & 0xff; ++ NFADDR = page_num & 0xff; ++ NFADDR = (page_num >> 8) & 0xff; ++ NFADDR = (page_num >> 16) & 0xff; ++ NFCMD = NAND_CMD_READSTART; ++#endif ++ nand_wait(); ++ data = (NFDATA & 0xff); ++ if (data != 0xff) ++ return 1; ++ ++ return 0; ++} ++ ++static int nand_read_page_ll(unsigned char *buf, unsigned long addr) ++{ ++ unsigned short *ptr16 = (unsigned short *)buf; ++ unsigned int i, page_num; ++ ++ nand_clear_RnB(); ++ ++ NFCMD = NAND_CMD_READ0; ++ ++#if (NAND_PAGE_SIZE == 512) ++ /* Write Address */ ++ NFADDR = addr & 0xff; ++ NFADDR = (addr >> 9) & 0xff; ++ NFADDR = (addr >> 17) & 0xff; ++ NFADDR = (addr >> 25) & 0xff; ++#elif (NAND_PAGE_SIZE == 2048) ++ page_num = addr >> 11; /* addr / 2048 */ ++ /* Write Address */ ++ NFADDR = 0; ++ NFADDR = 0; ++ NFADDR = page_num & 0xff; ++ NFADDR = (page_num >> 8) & 0xff; ++ NFADDR = (page_num >> 16) & 0xff; ++ NFCMD = NAND_CMD_READSTART; ++#else ++#error "unsupported nand page size" ++#endif ++ nand_wait(); ++ ++#if defined(CONFIG_S3C2410) ++ for (i = 0; i < NAND_PAGE_SIZE; i++) { ++ *buf = (NFDATA & 0xff); ++ buf++; ++ } ++#elif defined(CONFIG_S3C2440) ++ for (i = 0; i < NAND_PAGE_SIZE/2; i++) { ++ *ptr16 = NFDATA16; ++ ptr16++; ++ } ++#endif ++ ++ return NAND_PAGE_SIZE; ++} + + /* low level nand read function */ + int nand_read_ll(unsigned char *buf, unsigned long start_addr, int size) +@@ -50,47 +161,28 @@ + return -1; /* invalid alignment */ + + /* chip Enable */ +- NFCONF &= ~0x800; ++ nand_select(); ++ nand_clear_RnB(); + for (i=0; i<10; i++); + + for (i=start_addr; i < (start_addr + size);) { + #ifdef CONFIG_S3C2410_NAND_SKIP_BAD +- if (start_addr % NAND_PAGE_SIZE == 0) { +- unsigned char data; +- NFCMD = 0x50; +- NFADDR = 517&0xf; +- NFADDR = (i >> 9) & 0xff; +- NFADDR = (i >> 17) & 0xff; +- NFADDR = (i >> 25) & 0xff; +- wait_idle(); +- data = (NFDATA & 0xff); +- if (data != 0xff) { ++ if (start_addr % NAND_BLOCK_SIZE == 0) { ++ if (is_bad_block(i)) { + /* Bad block */ +- i += NAND_PAGE_SIZE; +- size += NAND_PAGE_SIZE; ++ i += NAND_BLOCK_SIZE; ++ size += NAND_BLOCK_SIZE; + continue; + } + } + #endif +- /* READ0 */ +- NFCMD = 0; +- +- /* Write Address */ +- NFADDR = i & 0xff; +- NFADDR = (i >> 9) & 0xff; +- NFADDR = (i >> 17) & 0xff; +- NFADDR = (i >> 25) & 0xff; +- +- wait_idle(); +- +- for (j=0; j < NAND_SECTOR_SIZE; j++, i++) { +- *buf = (NFDATA & 0xff); +- buf++; +- } ++ j = nand_read_page_ll(buf, i); ++ i += j; ++ buf += j; + } + + /* chip Disable */ +- NFCONF |= 0x800; /* chip disable */ ++ nand_deselect(); + + return 0; + } +Index: u-boot/cpu/arm920t/s3c24x0/nand.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/nand.c ++++ u-boot/cpu/arm920t/s3c24x0/nand.c +@@ -36,24 +36,54 @@ + #define __REGi(x) (*(volatile unsigned int *)(x)) + + #define NF_BASE 0x4e000000 ++ + #define NFCONF __REGi(NF_BASE + 0x0) +-#define NFCMD __REGb(NF_BASE + 0x4) +-#define NFADDR __REGb(NF_BASE + 0x8) +-#define NFDATA __REGb(NF_BASE + 0xc) +-#define NFSTAT __REGb(NF_BASE + 0x10) ++ ++#if defined(CONFIG_S3C2410) ++ ++#define oNFCMD 0x4 ++#define oNFADDR 0x8 ++#define oNFDATA 0xc ++#define oNFSTAT 0x10 + #define NFECC0 __REGb(NF_BASE + 0x14) + #define NFECC1 __REGb(NF_BASE + 0x15) + #define NFECC2 __REGb(NF_BASE + 0x16) ++#define NFCONF_nFCE (1<<11) + + #define S3C2410_NFCONF_EN (1<<15) + #define S3C2410_NFCONF_512BYTE (1<<14) + #define S3C2410_NFCONF_4STEP (1<<13) + #define S3C2410_NFCONF_INITECC (1<<12) +-#define S3C2410_NFCONF_nFCE (1<<11) + #define S3C2410_NFCONF_TACLS(x) ((x)<<8) + #define S3C2410_NFCONF_TWRPH0(x) ((x)<<4) + #define S3C2410_NFCONF_TWRPH1(x) ((x)<<0) + ++#elif defined(CONFIG_S3C2440) ++ ++#define oNFCMD 0x8 ++#define oNFADDR 0xc ++#define oNFDATA 0x10 ++#define oNFSTAT 0x20 ++ ++#define NFCONT __REGi(NF_BASE + 0x04) ++#define NFMECC0 __REGi(NF_BASE + 0x2C) ++#define NFCONF_nFCE (1<<1) ++#define S3C2440_NFCONF_INITECC (1<<4) ++#define S3C2440_NFCONF_MAINECCLOCK (1<<5) ++#define nand_select() (NFCONT &= ~(1 << 1)) ++#define nand_deselect() (NFCONT |= (1 << 1)) ++#define nand_clear_RnB() (NFSTAT |= (1 << 2)) ++#define nand_detect_RB() { while(!(NFSTAT&(1<<2))); } ++#define nand_wait() { while(!(NFSTAT & 0x4)); } /* RnB_TransDectect */ ++ ++#endif ++ ++#define NFCMD __REGb(NF_BASE + oNFCMD) ++#define NFADDR __REGb(NF_BASE + oNFADDR) ++#define NFDATA __REGb(NF_BASE + oNFDATA) ++#define NFSTAT __REGb(NF_BASE + oNFSTAT) ++ ++ + static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd) + { + struct nand_chip *chip = mtd->priv; +@@ -62,23 +92,31 @@ + + switch (cmd) { + case NAND_CTL_SETNCE: +- NFCONF &= ~S3C2410_NFCONF_nFCE; ++#if defined(CONFIG_S3C2410) ++ NFCONF &= ~NFCONF_nFCE; ++#elif defined(CONFIG_S3C2440) ++ NFCONT &= ~NFCONF_nFCE; ++#endif + DEBUGN("NFCONF=0x%08x\n", NFCONF); + break; + case NAND_CTL_CLRNCE: +- NFCONF |= S3C2410_NFCONF_nFCE; ++#if defined(CONFIG_S3C2410) ++ NFCONF |= NFCONF_nFCE; ++#elif defined(CONFIG_S3C2440) ++ NFCONT &= ~NFCONF_nFCE; ++#endif + DEBUGN("NFCONF=0x%08x\n", NFCONF); + break; + case NAND_CTL_SETALE: +- chip->IO_ADDR_W = NF_BASE + 0x8; ++ chip->IO_ADDR_W = NF_BASE + oNFADDR; + DEBUGN("SETALE\n"); + break; + case NAND_CTL_SETCLE: +- chip->IO_ADDR_W = NF_BASE + 0x4; ++ chip->IO_ADDR_W = NF_BASE + oNFCMD; + DEBUGN("SETCLE\n"); + break; + default: +- chip->IO_ADDR_W = NF_BASE + 0xc; ++ chip->IO_ADDR_W = NF_BASE + oNFDATA; + break; + } + return; +@@ -180,16 +218,21 @@ + /* initialize hardware */ + twrph0 = 3; twrph1 = 0; tacls = 0; + ++#if defined(CONFIG_S3C2410) + cfg = S3C2410_NFCONF_EN; + cfg |= S3C2410_NFCONF_TACLS(tacls - 1); + cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1); + cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1); + + NFCONF = cfg; +- //NFCONF = 0xf842; ++#elif defined(CONFIG_S3C2440) ++ twrph0 = 7; twrph1 = 7; tacls = 7; ++ NFCONF = (tacls<<12)|(twrph0<<8)|(twrph1<<4)|(0<<0); ++ NFCONT = (0<<13)|(0<<12)|(0<<10)|(0<<9)|(0<<8)|(1<<6)|(1<<5)|(1<<4)|(1<<1)|(1<<0); ++#endif + + /* initialize nand_chip data structure */ +- nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c; ++ nand->IO_ADDR_R = nand->IO_ADDR_W = NF_BASE + oNFDATA; + + /* read_buf and write_buf are default */ + /* read_byte and write_byte are default */ +@@ -214,12 +257,23 @@ + nand->options = 0; + #endif + ++#if defined(CONFIG_S3C2440) ++/* ++ nand_select(); ++ nand_clear_RnB(); ++ NFCMD = NAND_CMD_RESET; ++ { volatile int i; for (i = 0; i < 10; i ++); } ++ nand_detect_RB(); ++ nand_deselect(); ++*/ ++#endif ++ + DEBUGN("end of nand_init\n"); + + return 0; + } + + #else +- #error "U-Boot legacy NAND support not available for S3C2410" ++ #error "U-Boot legacy NAND support not available for S3C24xx" + #endif + #endif +Index: u-boot/cpu/arm920t/s3c24x0/mmc.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/mmc.c ++++ u-boot/cpu/arm920t/s3c24x0/mmc.c +@@ -137,6 +137,9 @@ + dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART; + if (wide) + dcon |= S3C2410_SDIDCON_WIDEBUS; ++#if defined(CONFIG_S3C2440) ++ dcon |= S3C2440_SDIDCON_DS_WORD | S3C2440_SDIDCON_DATSTART; ++#endif + sdi->SDIDCON = dcon; + + /* send read command */ +@@ -394,13 +397,18 @@ + + clk_power->CLKCON |= (1 << 9); + ++ sdi->SDIBSIZE = 512; ++#if defined(CONFIG_S3C2410) + /* S3C2410 has some bug that prevents reliable operation at higher speed */ + //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ +- sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */ +- sdi->SDIBSIZE = 512; ++ sdi->SDIPRE = 0x02; /* 2410: SDCLK = PCLK/2 / (SDIPRE+1) = 11MHz */ + sdi->SDIDTIMER = 0xffff; ++#elif defined(CONFIG_S3C2440) ++ sdi->SDIPRE = 0x05; /* 2410: SDCLK = PCLK / (SDIPRE+1) = 11MHz */ ++ sdi->SDIDTIMER = 0x7fffff; ++#endif + sdi->SDIIMSK = 0x0; +- sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK; ++ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2410_SDICON_CLOCKTYPE; + udelay(125000); /* FIXME: 74 SDCLK cycles */ + + mmc_csd.c_size = 0; diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2443.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2443.patch new file mode 100644 index 0000000000..62ae5592ab --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-s3c2443.patch @@ -0,0 +1,256 @@ +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -35,6 +35,8 @@ + #include <s3c2410.h> + #elif defined(CONFIG_S3C2440) + #include <s3c2440.h> ++#elif defined(CONFIG_S3C2443) ++#include <s3c2443.h> + #endif + + +@@ -164,9 +166,15 @@ + # define UPLLCON_val ((0x3c << 12) + (0x4 << 4) + 0x2) + # define CLKDIVN_val 7 /* FCLK:HCLK:PCLK = 1:3:6 */ + # define CAMDIVN 0x4C000018 ++#elif defined(CONFIG_S3C2443) ++# define INTSUBMSK_val 0x1fffffff ++# define EPLLCON_val ((40 << 16) | (1 << 8) | (1)) /* 96 MHz */ ++# define MPLLCON_val ((81 << 16) | (2 << 8) | (0)) /* 1068 MHz */ ++# define CLKDIV0_val ((8 << 9) | (1 << 4) | (1 << 3) | (1 << 2) + #endif + +-#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) ++#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \ ++ defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) + ldr r0, =pWTCON + mov r1, #0x0 + str r1, [r0] +@@ -177,7 +185,7 @@ + mov r1, #0xffffffff + ldr r0, =INTMSK + str r1, [r0] +-# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) ++# if defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) + ldr r1, =INTSUBMSK_val + ldr r0, =INTSUBMSK + str r1, [r0] +@@ -196,6 +204,43 @@ + mcr p15, 0, r1, c1, c0, 0 + + ++#if defined(CONFIG_S3C2443) ++#define LOCKCON0 0x4c000000 ++#define LOCKCON1 0x4c000004 ++#define MPLLCON 0x4c000010 ++#define EPLLCON 0x4c000018 ++ ++ ldr r0, =CLKDIV0 ++ ldr r1, =CLKDIV0_val ++ str r1, [r0] ++ ++ /* set safe (way too long) locktime for both PLLs */ ++ ldr r0, =LOCKCON0 ++ mov r1, #0xffffff ++ str r1, [r0] ++ ldr r0, =LOCKCON1 ++ str r1, [r0] ++ ++ /* configure MPLL */ ++ ldr r0, =MPLLCON ++ ldr r1, =MPLLCON_val ++ str r1, [r0] ++ ++ /* select MPLL clock out for SYSCLK */ ++ ldr r0, =CLKSRC ++ ldr r1, [r0] ++ orr r1, r1, #0x10 ++ str r1, [r0] ++ ++#if 0 ++ /* configure EPLL */ ++ ldr r0, =EPLLCON ++ ldr r1, =EPLLCON_val ++ str r1, [r0] ++#endif ++ ++ ++#else /* i.e. 2440, 2410 and 2440 */ + #define LOCKTIME 0x4c000000 + #define UPLLCON 0x4c000008 + +@@ -223,6 +268,7 @@ + ldr r0, =CLKDIVN + mov r1, #CLKDIVN_val + str r1, [r0] ++#endif + + #if 1 + /* enable uart */ +@@ -249,7 +295,7 @@ + str r1, [r0, #0x28] + #endif + +-#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 */ ++#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 || CONFIG_S3C2440 || CONFIG_S3C2443 */ + + #ifndef CONFIG_SKIP_LOWLEVEL_INIT + #ifndef CONFIG_LL_INIT_NAND_ONLY +Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c +=================================================================== +--- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c ++++ u-boot/cpu/arm920t/s3c24x0/interrupts.c +@@ -31,7 +31,8 @@ + + #include <common.h> + #if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || \ +- defined(CONFIG_S3C2440) || defined (CONFIG_TRAB) ++ defined(CONFIG_S3C2440) || defined(CONFIG_S3C2443) || \ ++ defined (CONFIG_TRAB) + + #include <arm920t.h> + #if defined(CONFIG_S3C2400) +@@ -40,6 +41,8 @@ + #include <s3c2410.h> + #elif defined(CONFIG_S3C2440) + #include <s3c2440.h> ++#elif defined(CONFIG_S3C2443) ++#include <s3c2443.h> + #endif + + int timer_load_val = 0; +@@ -186,6 +189,7 @@ + #elif defined(CONFIG_SBC2410X) || \ + defined(CONFIG_SMDK2410) || \ + defined(CONFIG_SMDK2440) || \ ++ defined(CONFIG_SMDK2443) || \ + defined(CONFIG_VCMA9) + tbclk = CFG_HZ; + #else +Index: u-boot/drivers/usbdcore_s3c2410.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_s3c2410.c ++++ u-boot/drivers/usbdcore_s3c2410.c +@@ -24,7 +24,8 @@ + + #include <config.h> + +-#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440)) && defined(CONFIG_USB_DEVICE) ++#if (defined(CONFIG_S3C2410) || defined(CONFIG_S3C2440) || \ ++ defined(CONFIG_S3C2443)) && defined(CONFIG_USB_DEVICE) + + #include <common.h> + +Index: u-boot/include/s3c2443.h +=================================================================== +--- /dev/null ++++ u-boot/include/s3c2443.h +@@ -0,0 +1,106 @@ ++/* ++ * (C) Copyright 2007 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __S3C2443_H ++#define __S3C2443_H ++ ++#include <s3c24x0.h> ++ ++/* CLOCK & POWER MANAGEMENT (see S3C2443 manual chapter 2) */ ++typedef struct { ++ S3C24X0_REG32 LOCKCON0; ++ S3C24X0_REG32 LOCKCON1; ++ S3C24X0_REG32 OSCSET; ++ S3C24X0_REG32 res1; ++ S3C24X0_REG32 MPLLCON; ++ S3C24X0_REG32 res2; ++ S3C24X0_REG32 EPLLCON; ++ S3C24X0_REG32 res3; ++ S3C24X0_REG32 CLKSRC; ++ S3C24X0_REG32 CLKDIV0; ++ S3C24X0_REG32 CLKDIV1; ++ S3C24X0_REG32 res4; ++ S3C24X0_REG32 HCLKCON; ++ S3C24X0_REG32 PCLKCON; ++ S3C24X0_REG32 SCLKCON; ++ S3C24X0_REG32 res5; ++ S3C24X0_REG32 PWRMODE; ++ S3C24X0_REG32 SWRST; ++ S3C24X0_REG32 res6[2]; ++ S3C24X0_REG32 BUSPRI0; ++ S3C24X0_REG32 res7[3]; ++} /*__attribute__((__packed__))*/ S3C2443_CLOCK_POWER; ++ ++/* NAND FLASH (see S3C2443 manual chapter 7) */ ++typedef struct { ++ S3C24X0_REG32 NFCONF; ++ S3C24X0_REG32 NFCONT; ++ S3C24X0_REG32 NFCMD; ++ S3C24X0_REG32 NFADDR; ++ S3C24X0_REG32 NFDATA; ++ S3C24X0_REG32 NFMECCD0; ++ S3C24X0_REG32 NFMECCD1; ++ S3C24X0_REG32 NFSECCD; ++ S3C24X0_REG32 NFSBLK; ++ S3C24X0_REG32 NFEBLK; ++ S3C24X0_REG32 NFSTAT; ++ S3C24X0_REG32 NFECCERR0; ++ S3C24X0_REG32 NFECCERR1; ++ S3C24X0_REG32 NFMECC0; ++ S3C24X0_REG32 NFMECC1; ++ S3C24X0_REG32 NFSECC; ++ S3C24X0_REG32 NFMLCBITPT; ++} /*__attribute__((__packed__))*/ S3C2443_NAND; ++ ++/* STATIC MEMORY (see S3C2443 manual chapter 5) */ ++struct s3c2443_sm_bank { ++ S3C24X0_REG32 SMBIDCYR; ++ S3C24X0_REG32 SMBWSTRDR; ++ S3C24X0_REG32 SMBWSTWRR; ++ S3C24X0_REG32 SMBWSTOENR; ++ S3C24X0_REG32 SMBWSTWENR; ++ S3C24X0_REG32 SMBCR; ++ S3C24X0_REG32 SMBSR; ++ S3C24X0_REG32 SMBWSTBRDR; ++}; ++ ++typedef struct { ++ struct s3c2443_sm_bank bank[5]; /* 0x4f000000..0x4f0000bf */ ++ S3C24X0_REG32 res[0x40]; /* 0x4f0000c0..0x4f0000ff */ ++ S3C24X0_REG32 SMBONETYPER; ++ S3C24X0_REG32 SMCSR; ++ S3C24X0_REG32 SMCCR; ++} /*__attribute__((__packed__))*/ S3C2443_SMEM; ++ ++ ++/* MOBILE DRAM (see S3C2443 manual chapter 6) */ ++typedef struct { ++ S3C24X0_REG32 BANKCFG; ++ S3C24X0_REG32 BANKCON1; ++ S3C24X0_REG32 BANKCON2; ++ S3C24X0_REG32 BANKCON3; ++ S3C24X0_REG32 REFRESH; ++ S3C24X0_REG32 TIMEOUT; ++} /*__attribute__((__packed__))*/ S3C2443_MDRAM ++ ++#endif /* __S3C2443_H */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch new file mode 100644 index 0000000000..09392ad2cf --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2440.patch @@ -0,0 +1,1481 @@ +Add support for the Samsung SMDK2440 development board + +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2035,6 +2035,9 @@ + smdk2410_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0 + ++smdk2440_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0 ++ + SX1_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm925t sx1 + +Index: u-boot/include/configs/smdk2440.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/smdk2440.h +@@ -0,0 +1,296 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * Gary Jennejohn <gj@denx.de> ++ * David Mueller <d.mueller@elsoft.ch> ++ * ++ * Configuation settings for the SAMSUNG SMDK2440 board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#if 0 ++/* If we want to start u-boot from usb bootloader in NOR flash */ ++#define CONFIG_SKIP_RELOCATE_UBOOT 1 ++#define CONFIG_SKIP_LOWLEVEL_INIT 1 ++#else ++/* If we want to start u-boot directly from within NAND flash */ ++#define CONFIG_LL_INIT_NAND_ONLY ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++#endif ++ ++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ ++#define CONFIG_SMDK2440 1 /* on a SAMSUNG SMDK2440 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 16934400/* SMDK2440 has 16.9344MHz input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ ++#define CS8900_BASE 0x19000300 ++#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2440 */ ++#define CONFIG_HWFLOW 1 ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS \ ++ (CONFIG_CMD_DFL | \ ++ /*CFG_CMD_BSP | */ \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_DATE | \ ++ /*CFG_CMD_DHCP | */ \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_EXT2 | \ ++ CFG_CMD_FAT | \ ++ /*CFG_CMD_HWFLOW | */ \ ++ /* CFG_CMD_IDE | */ \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_USB) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8" ++#define CONFIG_ETHADDR 00:0c:20:02:0a:5b ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_IPADDR 192.168.1.100 ++#define CONFIG_SERVERIP 192.168.1.21 ++/*#define CONFIG_BOOTFILE "elinos-lart" */ ++//#define CONFIG_BOOTCOMMAND "nand read 0x32000000 0x34000 0x200000; bootm" ++#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x100000 0x200000; bootm" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "SMDK2440 # " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 32 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x32000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (512*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* IDE/ATA config */ ++ ++#if 0 ++#define CFG_IDE_MAXBUS 1 ++#define CFG_IDE_MAXDEVICE 2 ++#define CFG_IDE_PREINIT 0 ++ ++#define CFG_ATA_BASE_ADDR ++#endif ++ ++#define CONFIG_USB_OHCI 1 ++ ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* FIC */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x511b /* SMDK2440 CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "OpenMoko, Inc." ++#define CONFIG_USBD_PRODUCT_NAME "S3C2440 Bootloader " U_BOOT_VERSION ++#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 ++#define CONFIG_USBD_DFU_INTERFACE 2 ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++ ++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ ++#if 0 ++#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ ++#endif ++ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#ifdef CONFIG_AMD_LV800 ++#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ ++#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ ++#endif ++#ifdef CONFIG_AMD_LV400 ++#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ ++#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ ++#endif ++ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ ++#define CFG_ENV_OFFSET_OOB 1 ++#define CFG_PREBOOT_OVERRIDE 1 ++ ++#define NAND_MAX_CHIPS 1 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE 1 ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++#define CONFIG_EXT2 1 ++ ++#define CONFIG_NEW_QT2440 0 ++ ++/* FAT driver in u-boot is broken currently */ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 1 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++#if 0 ++#define CONFIG_SERIAL_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#endif ++ ++ ++#if 0 ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++#endif ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++//#define CONFIG_S3C2410_NAND_HWECC 1 ++ ++#define CFG_NAND_YAFFS_WRITE ++#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT ++ ++#define MTDIDS_DEFAULT "nand0=smdk2440-nand" ++#define MTPARTS_DEFAULT "smdk2440-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2440-nand" ++#define CONFIG_NAND_DYNPART ++ ++#endif /* __CONFIG_H */ +Index: u-boot/include/configs/smdk2440nand.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/smdk2440nand.h +@@ -0,0 +1,47 @@ ++/* ++ * (C) Copyright 2004 ++ * Samsung Electronics : SW.LEE <hitchcar@samsung.com> ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ */ ++ ++#ifndef __SMDK2440_NAND_H ++#define __SMDK2440_NAND_H ++ ++#define CFG_ENV_NAND_BLOCK 8 ++ ++#if 0 //old flash ++#define NAND_OOB_SIZE (16) ++#define NAND_PAGES_IN_BLOCK (32) ++#define NAND_PAGE_SIZE (512) ++ ++#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK) ++#define NAND_BLOCK_MASK (NAND_BLOCK_SIZE - 1) ++#define NAND_PAGE_MASK (NAND_PAGE_SIZE - 1) ++#else //new flash ++#define NAND_OOB_SIZE (64) ++#define NAND_PAGES_IN_BLOCK (64) ++#define NAND_PAGE_SIZE (2048) ++ ++#define NAND_BLOCK_SIZE (NAND_PAGE_SIZE*NAND_PAGES_IN_BLOCK) ++#define NAND_BLOCK_MASK (NAND_BLOCK_SIZE - 1) ++#define NAND_PAGE_MASK (NAND_PAGE_SIZE - 1) ++ ++#endif ++ ++ ++ ++//#define NAND_3_ADDR_CYCLE 1 ++//#define S3C24X0_16BIT_NAND 1 ++ ++#ifdef KINGFISH ++#undef S3C24X0_16BIT_NAND ++#define S3C24X0_16BIT_NAND 1 ++#endif ++ ++#endif ++ +Index: u-boot/board/smdk2440/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/Makefile +@@ -0,0 +1,67 @@ ++# ++# (C) Copyright 2000-2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := smdk2440.o flash.o udc.o ++SOBJS := lowlevel_init.o ++ ++.PHONY: all ++ ++all: $(LIB) lowlevel_foo.bin ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++lowlevel_foo.o: lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds ++ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowlevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +Index: u-boot/board/smdk2440/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/config.mk +@@ -0,0 +1,29 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# SAMSUNG SMDK2440 board with S3C2440 (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x511b ++CONFIG_USB_DFU_REVISION=0x0100 ++ ++# ++# SMDK2440 has 1 bank of 64 MB DRAM ++# ++# 3000'0000 to 3400'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# we load ourself to 33F8'0000 ++# ++# download area is 3300'0000 ++# ++ ++ ++TEXT_BASE = 0x33F80000 +Index: u-boot/board/smdk2440/flash.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/flash.c +@@ -0,0 +1,433 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Alex Zuepke <azu@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ulong myflush (void); ++ ++ ++#define FLASH_BANK_SIZE PHYS_FLASH_SIZE ++#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++ ++ ++#define CMD_READ_ARRAY 0x000000F0 ++#define CMD_UNLOCK1 0x000000AA ++#define CMD_UNLOCK2 0x00000055 ++#define CMD_ERASE_SETUP 0x00000080 ++#define CMD_ERASE_CONFIRM 0x00000030 ++#define CMD_PROGRAM 0x000000A0 ++#define CMD_UNLOCK_BYPASS 0x00000020 ++ ++#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) ++#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) ++ ++#define BIT_ERASE_DONE 0x00000080 ++#define BIT_RDY_MASK 0x00000080 ++#define BIT_PROGRAM_ERROR 0x00000020 ++#define BIT_TIMEOUT 0x80000000 /* our flag */ ++ ++#define READY 1 ++#define ERR 2 ++#define TMO 4 ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++ulong flash_init (void) ++{ ++ int i, j; ++ ulong size = 0; ++ ++ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { ++ ulong flashbase = 0; ++ ++ flash_info[i].flash_id = ++#if defined(CONFIG_AMD_LV400) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV400B & FLASH_TYPEMASK); ++#elif defined(CONFIG_AMD_LV800) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV800B & FLASH_TYPEMASK); ++#else ++#error "Unknown flash configured" ++#endif ++ flash_info[i].size = FLASH_BANK_SIZE; ++ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; ++ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); ++ if (i == 0) ++ flashbase = PHYS_FLASH_1; ++ else ++ panic ("configured too many flash banks!\n"); ++ for (j = 0; j < flash_info[i].sector_count; j++) { ++ if (j <= 3) { ++ /* 1st one is 16 KB */ ++ if (j == 0) { ++ flash_info[i].start[j] = ++ flashbase + 0; ++ } ++ ++ /* 2nd and 3rd are both 8 KB */ ++ if ((j == 1) || (j == 2)) { ++ flash_info[i].start[j] = ++ flashbase + 0x4000 + (j - ++ 1) * ++ 0x2000; ++ } ++ ++ /* 4th 32 KB */ ++ if (j == 3) { ++ flash_info[i].start[j] = ++ flashbase + 0x8000; ++ } ++ } else { ++ flash_info[i].start[j] = ++ flashbase + (j - 3) * MAIN_SECT_SIZE; ++ } ++ } ++ size += flash_info[i].size; ++ } ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_FLASH_BASE, ++ CFG_FLASH_BASE + monitor_flash_len - 1, ++ &flash_info[0]); ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_ENV_ADDR, ++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); ++ ++ return size; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++void flash_print_info (flash_info_t * info) ++{ ++ int i; ++ ++ switch (info->flash_id & FLASH_VENDMASK) { ++ case (AMD_MANUFACT & FLASH_VENDMASK): ++ printf ("AMD: "); ++ break; ++ default: ++ printf ("Unknown Vendor "); ++ break; ++ } ++ ++ switch (info->flash_id & FLASH_TYPEMASK) { ++ case (AMD_ID_LV400B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV400BB (4Mbit)\n"); ++ break; ++ case (AMD_ID_LV800B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV800BB (8Mbit)\n"); ++ break; ++ default: ++ printf ("Unknown Chip Type\n"); ++ goto Done; ++ break; ++ } ++ ++ printf (" Size: %ld MB in %d Sectors\n", ++ info->size >> 20, info->sector_count); ++ ++ printf (" Sector Start Addresses:"); ++ for (i = 0; i < info->sector_count; i++) { ++ if ((i % 5) == 0) { ++ printf ("\n "); ++ } ++ printf (" %08lX%s", info->start[i], ++ info->protect[i] ? " (RO)" : " "); ++ } ++ printf ("\n"); ++ ++ Done:; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++int flash_erase (flash_info_t * info, int s_first, int s_last) ++{ ++ ushort result; ++ int iflag, cflag, prot, sect; ++ int rc = ERR_OK; ++ int chip; ++ ++ /* first look for protection bits */ ++ ++ if (info->flash_id == FLASH_UNKNOWN) ++ return ERR_UNKNOWN_FLASH_TYPE; ++ ++ if ((s_first < 0) || (s_first > s_last)) { ++ return ERR_INVAL; ++ } ++ ++ if ((info->flash_id & FLASH_VENDMASK) != ++ (AMD_MANUFACT & FLASH_VENDMASK)) { ++ return ERR_UNKNOWN_FLASH_VENDOR; ++ } ++ ++ prot = 0; ++ for (sect = s_first; sect <= s_last; ++sect) { ++ if (info->protect[sect]) { ++ prot++; ++ } ++ } ++ if (prot) ++ return ERR_PROTECTED; ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ /* Start erase on unprotected sectors */ ++ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { ++ printf ("Erasing sector %2d ... ", sect); ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ if (info->protect[sect] == 0) { /* not protected */ ++ vu_short *addr = (vu_short *) (info->start[sect]); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ *addr = CMD_ERASE_CONFIRM; ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > ++ CFG_FLASH_ERASE_TOUT) { ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ chip = TMO; ++ break; ++ } ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_ERASE_DONE) ++ chip = READY; ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) ++ chip = ERR; ++ ++ } while (!chip); ++ ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ ++ if (chip == ERR) { ++ rc = ERR_PROG_ERROR; ++ goto outahere; ++ } ++ if (chip == TMO) { ++ rc = ERR_TIMOUT; ++ goto outahere; ++ } ++ ++ printf ("ok.\n"); ++ } else { /* it was protected */ ++ ++ printf ("protected!\n"); ++ } ++ } ++ ++ if (ctrlc ()) ++ printf ("User Interrupt!\n"); ++ ++ outahere: ++ /* allow flash to settle - wait 10 ms */ ++ udelay_masked (10000); ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash ++ */ ++ ++volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) ++{ ++ vu_short *addr = (vu_short *) dest; ++ ushort result; ++ int rc = ERR_OK; ++ int cflag, iflag; ++ int chip; ++ ++ /* ++ * Check if Flash is (sufficiently) erased ++ */ ++ result = *addr; ++ if ((result & data) != data) ++ return ERR_NOT_ERASED; ++ ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; ++ *addr = CMD_PROGRAM; ++ *addr = data; ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { ++ chip = ERR | TMO; ++ break; ++ } ++ if (!chip && ((result & 0x80) == (data & 0x80))) ++ chip = READY; ++ ++ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { ++ result = *addr; ++ ++ if ((result & 0x80) == (data & 0x80)) ++ chip = READY; ++ else ++ chip = ERR; ++ } ++ ++ } while (!chip); ++ ++ *addr = CMD_READ_ARRAY; ++ ++ if (chip == ERR || *addr != data) ++ rc = ERR_PROG_ERROR; ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash. ++ */ ++ ++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) ++{ ++ ulong cp, wp; ++ int l; ++ int i, rc; ++ ushort data; ++ ++ wp = (addr & ~1); /* get lower word aligned address */ ++ ++ /* ++ * handle unaligned start bytes ++ */ ++ if ((l = addr - wp) != 0) { ++ data = 0; ++ for (i = 0, cp = wp; i < l; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ for (; i < 2 && cnt > 0; ++i) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ ++cp; ++ } ++ for (; cnt == 0 && i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ wp += 2; ++ } ++ ++ /* ++ * handle word aligned part ++ */ ++ while (cnt >= 2) { ++ data = *((vu_short *) src); ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ src += 2; ++ wp += 2; ++ cnt -= 2; ++ } ++ ++ if (cnt == 0) { ++ return ERR_OK; ++ } ++ ++ /* ++ * handle unaligned tail bytes ++ */ ++ data = 0; ++ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ } ++ for (; i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ return write_hword (info, wp, data); ++} +Index: u-boot/board/smdk2440/lowlevel_init.S +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/lowlevel_init.S +@@ -0,0 +1,167 @@ ++/* ++ * Memory Setup stuff - taken from blob memsetup.S ++ * ++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and ++ * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) ++ * ++ * Modified for the Samsung SMDK2410 by ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <config.h> ++#include <version.h> ++ ++ ++/* some parameters for the board */ ++ ++/* ++ * ++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S ++ * ++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> ++ * ++ */ ++ ++#define BWSCON 0x48000000 ++ ++/* BWSCON */ ++#define DW8 (0x0) ++#define DW16 (0x1) ++#define DW32 (0x2) ++#define WAIT (0x1<<2) ++#define UBLB (0x1<<3) ++ ++#define B1_BWSCON (DW32) ++#define B2_BWSCON (DW16) ++#define B3_BWSCON (DW16 + WAIT + UBLB) ++#define B4_BWSCON (DW16) ++#define B5_BWSCON (DW16) ++#define B6_BWSCON (DW32) ++#define B7_BWSCON (DW32) ++ ++/* BANK0CON */ ++#define B0_Tacs 0x0 /* 0clk */ ++#define B0_Tcos 0x0 /* 0clk */ ++#define B0_Tacc 0x7 /* 14clk */ ++#define B0_Tcoh 0x0 /* 0clk */ ++#define B0_Tah 0x0 /* 0clk */ ++#define B0_Tacp 0x0 ++#define B0_PMC 0x0 /* normal */ ++ ++/* BANK1CON */ ++#define B1_Tacs 0x0 /* 0clk */ ++#define B1_Tcos 0x0 /* 0clk */ ++#define B1_Tacc 0x7 /* 14clk */ ++#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tah 0x0 /* 0clk */ ++#define B1_Tacp 0x0 ++#define B1_PMC 0x0 ++ ++#define B2_Tacs 0x0 ++#define B2_Tcos 0x0 ++#define B2_Tacc 0x7 ++#define B2_Tcoh 0x0 ++#define B2_Tah 0x0 ++#define B2_Tacp 0x0 ++#define B2_PMC 0x0 ++ ++#define B3_Tacs 0x0 /* 0clk */ ++#define B3_Tcos 0x3 /* 4clk */ ++#define B3_Tacc 0x7 /* 14clk */ ++#define B3_Tcoh 0x1 /* 1clk */ ++#define B3_Tah 0x0 /* 0clk */ ++#define B3_Tacp 0x3 /* 6clk */ ++#define B3_PMC 0x0 /* normal */ ++ ++#define B4_Tacs 0x0 /* 0clk */ ++#define B4_Tcos 0x0 /* 0clk */ ++#define B4_Tacc 0x7 /* 14clk */ ++#define B4_Tcoh 0x0 /* 0clk */ ++#define B4_Tah 0x0 /* 0clk */ ++#define B4_Tacp 0x0 ++#define B4_PMC 0x0 /* normal */ ++ ++#define B5_Tacs 0x0 /* 0clk */ ++#define B5_Tcos 0x0 /* 0clk */ ++#define B5_Tacc 0x7 /* 14clk */ ++#define B5_Tcoh 0x0 /* 0clk */ ++#define B5_Tah 0x0 /* 0clk */ ++#define B5_Tacp 0x0 ++#define B5_PMC 0x0 /* normal */ ++ ++#define B6_MT 0x3 /* SDRAM */ ++#define B6_Trcd 0x1 ++#define B6_SCAN 0x1 /* 9bit */ ++ ++#define B7_MT 0x3 /* SDRAM */ ++#define B7_Trcd 0x1 /* 3clk */ ++#define B7_SCAN 0x1 /* 9bit */ ++ ++/* REFRESH parameter */ ++#define REFEN 0x1 /* Refresh enable */ ++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ ++#define Trp 0x0 /* 2clk */ ++#define Trc 0x3 /* 7clk */ ++#define Tchr 0x2 /* 3clk */ ++#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ ++/**************************************/ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl lowlevel_init ++lowlevel_init: ++ /* memory control configuration */ ++ /* make r0 relative the current location so that it */ ++ /* reads SMRDATA out of FLASH rather than memory ! */ ++ ldr r0, =SMRDATA ++ ldr r1, _TEXT_BASE ++ sub r0, r0, r1 ++ ldr r1, =BWSCON /* Bus Width Status Controller */ ++ add r2, r0, #13*4 ++0: ++ ldr r3, [r0], #4 ++ str r3, [r1], #4 ++ cmp r2, r0 ++ bne 0b ++ ++ /* everything is fine now */ ++ mov pc, lr ++ ++ .ltorg ++/* the literal pools origin */ ++ ++SMRDATA: ++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) ++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) ++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) ++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) ++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) ++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) ++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) ++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) ++ .word 0x32 ++ .word 0x30 ++ .word 0x30 +Index: u-boot/board/smdk2440/smdk2440.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/smdk2440.c +@@ -0,0 +1,152 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Marius Groeger <mgroeger@sysgo.de> ++ * ++ * (C) Copyright 2002 ++ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <s3c2440.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define FCLK_SPEED 1 ++ ++#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ ++#define M_MDIV 0xC3 ++#define M_PDIV 0x4 ++#define M_SDIV 0x1 ++#elif FCLK_SPEED==1 /* Fout = 399.65MHz */ ++#define M_MDIV 0x6e ++#define M_PDIV 0x3 ++#define M_SDIV 0x1 ++#endif ++ ++#define USB_CLOCK 1 ++ ++#if USB_CLOCK==0 ++#define U_M_MDIV 0xA1 ++#define U_M_PDIV 0x3 ++#define U_M_SDIV 0x1 ++#elif USB_CLOCK==1 ++#define U_M_MDIV 0x3c ++#define U_M_PDIV 0x4 ++#define U_M_SDIV 0x2 ++#endif ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++ gpio->GPACON = 0x007FFFFF; ++ gpio->GPBCON = 0x002a9655; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPCCON = 0xAAAAAAAA; ++ gpio->GPCUP = 0x0000FFFF; ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ gpio->GPFCON = 0x000055AA; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPGCON = 0xFD95FFBA; ++ gpio->GPGUP = 0x0000FFFF; ++#ifdef CONFIG_SERIAL3 ++ gpio->GPHCON = 0x002AAAAA; ++#else ++ gpio->GPHCON = 0x002AFAAA; ++#endif ++ gpio->GPHUP = 0x000007FF; ++ ++ gpio->GPJCON = 0x2AAAAAA; ++ ++#if 0 ++ /* USB Device Part */ ++ /*GPGCON is reset for USB Device */ ++ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ ++ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ ++ ++ gpio->GPGDAT |= ( 1 << 12) ; ++ gpio->GPGDAT &= ~( 1 << 12) ; ++ udelay(20000); ++ gpio->GPGDAT |= ( 1 << 12) ; ++#endif ++ ++ /* arch number of SMDK2440-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_S3C2440; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++int dram_init (void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. ++ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 ++ images: 640*480*2*2 = 1228800 < 1245184. */ ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ ++ +Index: u-boot/board/smdk2440/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/board/smdk2440/udc.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/udc.c +@@ -0,0 +1,23 @@ ++ ++#include <common.h> ++#include <usbdcore.h> ++#include <s3c2440.h> ++ ++void udc_ctrl(enum usbd_event event, int param) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ switch (event) { ++ case UDC_CTRL_PULLUP_ENABLE: ++ if (param) ++ gpio->GPGDAT |= (1 << 12); ++ else ++ gpio->GPGDAT &= ~(1 << 12); ++ break; ++ case UDC_CTRL_500mA_ENABLE: ++ /* IGNORE */ ++ break; ++ default: ++ break; ++ } ++} +Index: u-boot/board/smdk2440/lowlevel_foo.S +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/lowlevel_foo.S +@@ -0,0 +1,82 @@ ++ ++_start: ++ b reset ++undefvec: ++ b undefvec ++swivec: ++ b swivec ++pabtvec: ++ b pabtvec ++dabtvec: ++ b dabtvec ++rsvdvec: ++ b rsvdvec ++irqvec: ++ b irqvec ++fiqvec: ++ b fiqvec ++ ++reset: ++ /* ++ * set the cpu to SVC32 mode ++ */ ++ mrs r0,cpsr ++ bic r0,r0,#0x1f ++ orr r0,r0,#0xd3 ++ msr cpsr,r0 ++ ++/* turn off the watchdog */ ++#define pWTCON 0x53000000 ++#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ ++#define INTSUBMSK 0x4A00001C ++#define CLKDIVN 0x4C000014 /* clock divisor register */ ++ ++ ldr r0, =pWTCON ++ mov r1, #0x0 ++ str r1, [r0] ++ ++ mov r1, #0xffffffff ++ ldr r0, =INTMSK ++ str r1, [r0] ++ ldr r1, =0x3ff ++ ldr r0, =INTSUBMSK ++ str r1, [r0] ++ ++ /* FCLK:HCLK:PCLK = 1:2:4 */ ++ /* default FCLK is 120 MHz ! */ ++ ldr r0, =CLKDIVN ++ mov r1, #3 ++ str r1, [r0] ++ ++ bl cpu_init_crit ++ ldr r0,=TEXT_BASE ++ mov pc, r0 ++ ++cpu_init_crit: ++ /* ++ * flush v4 I/D caches ++ */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ ++ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ ++ ++ /* ++ * disable MMU stuff and caches ++ */ ++ mrc p15, 0, r0, c1, c0, 0 ++ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) ++ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) ++ orr r0, r0, #0x00000002 @ set bit 2 (A) Align ++ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache ++ mcr p15, 0, r0, c1, c0, 0 ++ ++ /* ++ * before relocating, we have to setup RAM timing ++ * because memory timing is board-dependend, you will ++ * find a lowlevel_init.S in your board directory. ++ */ ++ mov ip, lr ++ bl lowlevel_init ++ mov lr, ip ++ mov pc, lr ++ +Index: u-boot/board/smdk2440/lowlevel_foo.lds +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2440/lowlevel_foo.lds +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ lowlevel_foo.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2443.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2443.patch new file mode 100644 index 0000000000..5757cc078b --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-smdk2443.patch @@ -0,0 +1,1411 @@ +Index: u-boot/Makefile +=================================================================== +--- u-boot.orig/Makefile ++++ u-boot/Makefile +@@ -2045,6 +2045,9 @@ + smdk2440_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t smdk2440 NULL s3c24x0 + ++smdk2443_config : unconfig ++ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2443 NULL s3c24x0 ++ + SX1_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm925t sx1 + +Index: u-boot/board/smdk2443/Makefile +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/Makefile +@@ -0,0 +1,67 @@ ++# ++# (C) Copyright 2000-2006 ++# Wolfgang Denk, DENX Software Engineering, wd@denx.de. ++# ++# See file CREDITS for list of people who contributed to this ++# project. ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++ ++include $(TOPDIR)/config.mk ++ ++LIB = $(obj)lib$(BOARD).a ++ ++COBJS := smdk2443.o flash.o udc.o ++SOBJS := lowlevel_init.o ++ ++.PHONY: all ++ ++all: $(LIB) lowlevel_foo.bin ++ ++SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) ++OBJS := $(addprefix $(obj),$(COBJS)) ++SOBJS := $(addprefix $(obj),$(SOBJS)) ++ ++$(LIB): $(obj).depend $(OBJS) $(SOBJS) ++ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) ++ ++lowlevel_foo.o: lowlevel_foo.S ++ $(CC) -c -DTEXT_BASE=0x33F80000 -march=armv4 \ ++ -o lowlevel_foo.o lowlevel_foo.S ++ ++lowlevel_foo: lowlevel_foo.o lowlevel_init.o lowlevel_foo.lds ++ $(LD) -T ./lowlevel_foo.lds -Ttext 0x33f80000 -Bstatic \ ++ lowlevel_init.o lowlevel_foo.o -o lowlevel_foo ++ ++lowlevel_foo.bin: lowlevel_foo ++ $(CROSS_COMPILE)objcopy --gap-fill=0xff -O binary \ ++ lowlevel_foo lowlevel_foo.bin ++ ++clean: ++ rm -f $(SOBJS) $(OBJS) ++ ++distclean: clean ++ rm -f $(LIB) core *.bak .depend ++ ++######################################################################### ++ ++# defines $(obj).depend target ++include $(SRCTREE)/rules.mk ++ ++sinclude $(obj).depend ++ ++######################################################################### +Index: u-boot/board/smdk2443/smdk2443.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/smdk2443.c +@@ -0,0 +1,147 @@ ++/* ++ * (C) Copyright 2006 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++#include <s3c2440.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define FCLK_SPEED 1 ++ ++#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ ++#define M_MDIV 0xC3 ++#define M_PDIV 0x4 ++#define M_SDIV 0x1 ++#elif FCLK_SPEED==1 /* Fout = 399.65MHz */ ++#define M_MDIV 0x6e ++#define M_PDIV 0x3 ++#define M_SDIV 0x1 ++#endif ++ ++#define USB_CLOCK 1 ++ ++#if USB_CLOCK==0 ++#define U_M_MDIV 0xA1 ++#define U_M_PDIV 0x3 ++#define U_M_SDIV 0x1 ++#elif USB_CLOCK==1 ++#define U_M_MDIV 0x3c ++#define U_M_PDIV 0x4 ++#define U_M_SDIV 0x2 ++#endif ++ ++static inline void delay (unsigned long loops) ++{ ++ __asm__ volatile ("1:\n" ++ "subs %0, %1, #1\n" ++ "bne 1b":"=r" (loops):"0" (loops)); ++} ++ ++/* ++ * Miscellaneous platform dependent initialisations ++ */ ++ ++int board_init (void) ++{ ++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ /* to reduce PLL lock time, adjust the LOCKTIME register */ ++ clk_power->LOCKTIME = 0xFFFFFF; ++ ++ /* configure MPLL */ ++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (4000); ++ ++ /* configure UPLL */ ++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); ++ ++ /* some delay between MPLL and UPLL */ ++ delay (8000); ++ ++ /* set up the I/O ports */ ++ gpio->GPACON = 0x007FFFFF; ++ gpio->GPBCON = 0x00044555; ++ gpio->GPBUP = 0x000007FF; ++ gpio->GPCCON = 0xAAAAAAAA; ++ gpio->GPCUP = 0x0000FFFF; ++ gpio->GPDCON = 0xAAAAAAAA; ++ gpio->GPDUP = 0x0000FFFF; ++ gpio->GPECON = 0xAAAAAAAA; ++ gpio->GPEUP = 0x0000FFFF; ++ gpio->GPFCON = 0x000055AA; ++ gpio->GPFUP = 0x000000FF; ++ gpio->GPGCON = 0xFD95FFBA; ++ gpio->GPGUP = 0x0000FFFF; ++#ifdef CONFIG_SERIAL3 ++ gpio->GPHCON = 0x002AAAAA; ++#else ++ gpio->GPHCON = 0x002AFAAA; ++#endif ++ gpio->GPHUP = 0x000007FF; ++ ++#if 0 ++ /* USB Device Part */ ++ /*GPGCON is reset for USB Device */ ++ gpio->GPGCON = (gpio->GPGCON & ~(3 << 24)) | (1 << 24); /* Output Mode */ ++ gpio->GPGUP = gpio->GPGUP | ( 1 << 12); /* Pull up disable */ ++ ++ gpio->GPGDAT |= ( 1 << 12) ; ++ gpio->GPGDAT &= ~( 1 << 12) ; ++ udelay(20000); ++ gpio->GPGDAT |= ( 1 << 12) ; ++#endif ++ ++ /* arch number of SMDK2440-Board */ ++ gd->bd->bi_arch_number = MACH_TYPE_S3C2440; ++ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = 0x30000100; ++ ++ icache_enable(); ++ dcache_enable(); ++ ++ return 0; ++} ++ ++int dram_init (void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++/* The sum of all part_size[]s must equal to the NAND size, i.e., 0x4000000. ++ "initrd" is sized such that it can hold two uncompressed 16 bit 640*480 ++ images: 640*480*2*2 = 1228800 < 1245184. */ ++ ++unsigned int dynpart_size[] = { ++ CFG_UBOOT_SIZE, 0x20000, 0x200000, 0xa0000, 0x3d5c000-CFG_UBOOT_SIZE, 0 }; ++ ++char *dynpart_names[] = { ++ "u-boot", "u-boot_env", "kernel", "splash", "rootfs", NULL }; ++ ++ +Index: u-boot/board/smdk2443/u-boot.lds +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/u-boot.lds +@@ -0,0 +1,58 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ cpu/arm920t/start.o (.text) ++ cpu/arm920t/s3c24x0/nand_read.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/include/configs/smdk2443.h +=================================================================== +--- /dev/null ++++ u-boot/include/configs/smdk2443.h +@@ -0,0 +1,289 @@ ++/* ++ * (C) Copyright 2007 OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * Configuation settings for the SAMSUNG SMDK2443 board. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#ifndef __CONFIG_H ++#define __CONFIG_H ++ ++#if 0 ++/* If we want to start u-boot from usb bootloader in NOR flash */ ++#define CONFIG_SKIP_RELOCATE_UBOOT 1 ++#define CONFIG_SKIP_LOWLEVEL_INIT 1 ++#else ++/* If we want to start u-boot directly from within NAND flash */ ++#define CONFIG_LL_INIT_NAND_ONLY ++#define CONFIG_S3C2410_NAND_BOOT 1 ++#define CONFIG_S3C2410_NAND_SKIP_BAD 1 ++#endif ++ ++#define CFG_UBOOT_SIZE 0x40000 /* size of u-boot, for NAND loading */ ++ ++/* ++ * High Level Configuration Options ++ * (easy to change) ++ */ ++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ ++#define CONFIG_S3C2440 1 /* in a SAMSUNG S3C2440 SoC */ ++#define CONFIG_SMDK2443 1 /* on a SAMSUNG SMDK2440 Board */ ++ ++/* input clock of PLL */ ++#define CONFIG_SYS_CLK_FREQ 16934400/* SMDK2440 has 16.9344MHz input clock */ ++ ++ ++#define USE_920T_MMU 1 ++#define CONFIG_USE_IRQ 1 ++ ++/* ++ * Size of malloc() pool ++ */ ++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 2048*1024) ++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ ++ ++/* ++ * Hardware drivers ++ */ ++#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ ++#define CS8900_BASE 0x19000300 ++#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ ++ ++/* ++ * select serial console configuration ++ */ ++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2440 */ ++#define CONFIG_HWFLOW 1 ++ ++/************************************************************ ++ * RTC ++ ************************************************************/ ++#define CONFIG_RTC_S3C24X0 1 ++ ++/* allow to overwrite serial and ethaddr */ ++#define CONFIG_ENV_OVERWRITE ++ ++#define CONFIG_BAUDRATE 115200 ++ ++/*********************************************************** ++ * Command definition ++ ***********************************************************/ ++#define CONFIG_COMMANDS \ ++ (CONFIG_CMD_DFL | \ ++ /*CFG_CMD_BSP | */ \ ++ CFG_CMD_CACHE | \ ++ CFG_CMD_DATE | \ ++ /*CFG_CMD_DHCP | */ \ ++ CFG_CMD_DIAG | \ ++ CFG_CMD_ELF | \ ++ CFG_CMD_EXT2 | \ ++ CFG_CMD_FAT | \ ++ /*CFG_CMD_HWFLOW | */ \ ++ /* CFG_CMD_IDE | */ \ ++ /* CFG_CMD_IRQ | */ \ ++ CFG_CMD_JFFS2 | \ ++ CFG_CMD_MMC | \ ++ CFG_CMD_NAND | \ ++ CFG_CMD_PING | \ ++ CFG_CMD_PORTIO | \ ++ CFG_CMD_REGINFO | \ ++ CFG_CMD_SAVES | \ ++ CFG_CMD_LICENSE | \ ++ CFG_CMD_USB) ++ ++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ ++#include <cmd_confdefs.h> ++ ++#define CONFIG_BOOTDELAY 3 ++#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 console=ttySAC2,115200 loglevel=8" ++#define CONFIG_ETHADDR 00:0c:20:02:0a:5b ++#define CONFIG_NETMASK 255.255.255.0 ++#define CONFIG_IPADDR 192.168.1.100 ++#define CONFIG_SERVERIP 192.168.1.21 ++#define CONFIG_BOOTCOMMAND "nand read.e 0x32000000 0x100000 0x200000; bootm" ++ ++#define CONFIG_DOS_PARTITION 1 ++ ++#if (CONFIG_COMMANDS & CFG_CMD_KGDB) ++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ ++/* what's this ? it's not used anywhere */ ++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ ++#endif ++ ++/* ++ * Miscellaneous configurable options ++ */ ++#define CFG_LONGHELP /* undef to save memory */ ++#define CFG_PROMPT "SMDK2443 # " /* Monitor Command Prompt */ ++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ ++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ ++#define CFG_MAXARGS 32 /* max number of command args */ ++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ ++ ++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ ++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ ++ ++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ ++ ++#define CFG_LOAD_ADDR 0x32000000 /* default load address */ ++ ++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ ++/* it to wrap 100 times (total 1562500) to get 1 sec. */ ++#define CFG_HZ 1562500 ++ ++/* valid baudrates */ ++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } ++ ++/*----------------------------------------------------------------------- ++ * Stack sizes ++ * ++ * The stack sizes are set up in start.S using the settings below ++ */ ++#define CONFIG_STACKSIZE (512*1024) /* regular stack */ ++#ifdef CONFIG_USE_IRQ ++#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */ ++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ ++#endif ++ ++/* IDE/ATA config */ ++ ++#if 0 ++#define CFG_IDE_MAXBUS 1 ++#define CFG_IDE_MAXDEVICE 2 ++#define CFG_IDE_PREINIT 0 ++ ++#define CFG_ATA_BASE_ADDR ++#endif ++ ++#define CONFIG_USB_OHCI 1 ++ ++#define CONFIG_USB_DEVICE 1 ++#define CONFIG_USB_TTY 1 ++#define CFG_CONSOLE_IS_IN_ENV 1 ++#define CONFIG_USBD_VENDORID 0x1457 /* Linux/NetChip */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0x5120 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0x5119 /* CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "FiWin" ++#define CONFIG_USBD_PRODUCT_NAME "S3C2443 Bootloader " U_BOOT_VERSION ++#define CONFIG_EXTRA_ENV_SETTINGS "usbtty=cdc_acm\0" ++#define CONFIG_USBD_DFU 1 ++#define CONFIG_USBD_DFU_XFER_SIZE 4096 ++#define CONFIG_USBD_DFU_INTERFACE 2 ++ ++/*----------------------------------------------------------------------- ++ * Physical Memory Map ++ */ ++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ ++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ ++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ ++ ++#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ ++ ++#define CFG_FLASH_BASE PHYS_FLASH_1 ++ ++/*----------------------------------------------------------------------- ++ * FLASH and environment organization ++ */ ++ ++#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ ++#if 0 ++#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ ++#endif ++ ++#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ ++#ifdef CONFIG_AMD_LV800 ++#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ ++#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ ++#endif ++#ifdef CONFIG_AMD_LV400 ++#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ ++#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ ++#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ ++#endif ++ ++/* timeout values are in ticks */ ++#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ ++#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ ++ ++#define CFG_ENV_IS_IN_NAND 1 ++#define CFG_ENV_SIZE 0x20000 /* 128k Total Size of Environment Sector */ ++#define CFG_ENV_OFFSET_OOB 1 ++#define CFG_PREBOOT_OVERRIDE 1 ++ ++#define NAND_MAX_CHIPS 1 ++#define CFG_NAND_BASE 0x4e000000 ++#define CFG_MAX_NAND_DEVICE 1 ++ ++#define CONFIG_MMC 1 ++#define CFG_MMC_BASE 0xff000000 ++ ++#define CONFIG_EXT2 1 ++ ++/* FAT driver in u-boot is broken currently */ ++#define CONFIG_FAT 1 ++#define CONFIG_SUPPORT_VFAT ++ ++#if 1 ++/* JFFS2 driver */ ++#define CONFIG_JFFS2_CMDLINE 1 ++#define CONFIG_JFFS2_NAND 1 ++#define CONFIG_JFFS2_NAND_DEV 0 ++//#define CONFIG_JFFS2_NAND_OFF 0x634000 ++//#define CONFIG_JFFS2_NAND_SIZE 0x39cc000 ++#endif ++ ++/* ATAG configuration */ ++#define CONFIG_INITRD_TAG 1 ++#define CONFIG_SETUP_MEMORY_TAGS 1 ++#define CONFIG_CMDLINE_TAG 1 ++#if 0 ++#define CONFIG_SERIAL_TAG 1 ++#define CONFIG_REVISION_TAG 1 ++#endif ++ ++ ++#if 0 ++#define CONFIG_VIDEO ++#define CONFIG_VIDEO_S3C2410 ++#define CONFIG_CFB_CONSOLE ++#define CONFIG_VIDEO_LOGO ++#define CONFIG_VGA_AS_SINGLE_DEVICE ++ ++#define VIDEO_KBD_INIT_FCT 0 ++#define VIDEO_TSTC_FCT serial_tstc ++#define VIDEO_GETC_FCT serial_getc ++ ++#define LCD_VIDEO_ADDR 0x33d00000 ++#endif ++ ++#define CONFIG_S3C2410_NAND_BBT 1 ++//#define CONFIG_S3C2410_NAND_HWECC 1 ++ ++#define CFG_NAND_YAFFS_WRITE ++#define CFG_NAND_YAFFS1_NEW_OOB_LAYOUT ++ ++#define MTDIDS_DEFAULT "nand0=smdk2443-nand" ++#define MTPARTS_DEFAULT "smdk2443-nand:0x00100000(u-boot),0x00200000(kernel),0x00200000(update),0x00100000(splash),0x01400000(jffs2),-(temp)" ++#define CFG_NAND_DYNPART_MTD_KERNEL_NAME "smdk2443-nand" ++#define CONFIG_NAND_DYNPART ++ ++#endif /* __CONFIG_H */ +Index: u-boot/board/smdk2443/lowlevel_foo.S +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/lowlevel_foo.S +@@ -0,0 +1,82 @@ ++ ++_start: ++ b reset ++undefvec: ++ b undefvec ++swivec: ++ b swivec ++pabtvec: ++ b pabtvec ++dabtvec: ++ b dabtvec ++rsvdvec: ++ b rsvdvec ++irqvec: ++ b irqvec ++fiqvec: ++ b fiqvec ++ ++reset: ++ /* ++ * set the cpu to SVC32 mode ++ */ ++ mrs r0,cpsr ++ bic r0,r0,#0x1f ++ orr r0,r0,#0xd3 ++ msr cpsr,r0 ++ ++/* turn off the watchdog */ ++#define pWTCON 0x53000000 ++#define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ ++#define INTSUBMSK 0x4A00001C ++#define CLKDIVN 0x4C000014 /* clock divisor register */ ++ ++ ldr r0, =pWTCON ++ mov r1, #0x0 ++ str r1, [r0] ++ ++ mov r1, #0xffffffff ++ ldr r0, =INTMSK ++ str r1, [r0] ++ ldr r1, =0x3ff ++ ldr r0, =INTSUBMSK ++ str r1, [r0] ++ ++ /* FCLK:HCLK:PCLK = 1:2:4 */ ++ /* default FCLK is 120 MHz ! */ ++ ldr r0, =CLKDIVN ++ mov r1, #3 ++ str r1, [r0] ++ ++ bl cpu_init_crit ++ ldr r0,=TEXT_BASE ++ mov pc, r0 ++ ++cpu_init_crit: ++ /* ++ * flush v4 I/D caches ++ */ ++ mov r0, #0 ++ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ ++ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ ++ ++ /* ++ * disable MMU stuff and caches ++ */ ++ mrc p15, 0, r0, c1, c0, 0 ++ bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) ++ bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) ++ orr r0, r0, #0x00000002 @ set bit 2 (A) Align ++ orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache ++ mcr p15, 0, r0, c1, c0, 0 ++ ++ /* ++ * before relocating, we have to setup RAM timing ++ * because memory timing is board-dependend, you will ++ * find a lowlevel_init.S in your board directory. ++ */ ++ mov ip, lr ++ bl lowlevel_init ++ mov lr, ip ++ mov pc, lr ++ +Index: u-boot/board/smdk2443/lowlevel_init.S +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/lowlevel_init.S +@@ -0,0 +1,163 @@ ++/* ++ * SMDK2443 Memory Setup ++ * ++ * Copyright (C) 2007 by OpenMoko, Inc. ++ * Author: Harald Welte <laforge@openmoko.org> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++ ++#include <config.h> ++#include <version.h> ++ ++ ++/* some parameters for the board */ ++ ++/* ++ * ++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S ++ * ++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com> ++ * ++ */ ++ ++#define BWSCON 0x48000000 ++ ++/* BWSCON */ ++#define DW8 (0x0) ++#define DW16 (0x1) ++#define DW32 (0x2) ++#define WAIT (0x1<<2) ++#define UBLB (0x1<<3) ++ ++#define B1_BWSCON (DW32) ++#define B2_BWSCON (DW16) ++#define B3_BWSCON (DW16 + WAIT + UBLB) ++#define B4_BWSCON (DW16) ++#define B5_BWSCON (DW16) ++#define B6_BWSCON (DW32) ++#define B7_BWSCON (DW32) ++ ++/* BANK0CON */ ++#define B0_Tacs 0x0 /* 0clk */ ++#define B0_Tcos 0x0 /* 0clk */ ++#define B0_Tacc 0x7 /* 14clk */ ++#define B0_Tcoh 0x0 /* 0clk */ ++#define B0_Tah 0x0 /* 0clk */ ++#define B0_Tacp 0x0 ++#define B0_PMC 0x0 /* normal */ ++ ++/* BANK1CON */ ++#define B1_Tacs 0x0 /* 0clk */ ++#define B1_Tcos 0x0 /* 0clk */ ++#define B1_Tacc 0x7 /* 14clk */ ++#define B1_Tcoh 0x0 /* 0clk */ ++#define B1_Tah 0x0 /* 0clk */ ++#define B1_Tacp 0x0 ++#define B1_PMC 0x0 ++ ++#define B2_Tacs 0x0 ++#define B2_Tcos 0x0 ++#define B2_Tacc 0x7 ++#define B2_Tcoh 0x0 ++#define B2_Tah 0x0 ++#define B2_Tacp 0x0 ++#define B2_PMC 0x0 ++ ++#define B3_Tacs 0x0 /* 0clk */ ++#define B3_Tcos 0x3 /* 4clk */ ++#define B3_Tacc 0x7 /* 14clk */ ++#define B3_Tcoh 0x1 /* 1clk */ ++#define B3_Tah 0x0 /* 0clk */ ++#define B3_Tacp 0x3 /* 6clk */ ++#define B3_PMC 0x0 /* normal */ ++ ++#define B4_Tacs 0x0 /* 0clk */ ++#define B4_Tcos 0x0 /* 0clk */ ++#define B4_Tacc 0x7 /* 14clk */ ++#define B4_Tcoh 0x0 /* 0clk */ ++#define B4_Tah 0x0 /* 0clk */ ++#define B4_Tacp 0x0 ++#define B4_PMC 0x0 /* normal */ ++ ++#define B5_Tacs 0x0 /* 0clk */ ++#define B5_Tcos 0x0 /* 0clk */ ++#define B5_Tacc 0x7 /* 14clk */ ++#define B5_Tcoh 0x0 /* 0clk */ ++#define B5_Tah 0x0 /* 0clk */ ++#define B5_Tacp 0x0 ++#define B5_PMC 0x0 /* normal */ ++ ++#define B6_MT 0x3 /* SDRAM */ ++#define B6_Trcd 0x1 ++#define B6_SCAN 0x1 /* 9bit */ ++ ++#define B7_MT 0x3 /* SDRAM */ ++#define B7_Trcd 0x1 /* 3clk */ ++#define B7_SCAN 0x1 /* 9bit */ ++ ++/* REFRESH parameter */ ++#define REFEN 0x1 /* Refresh enable */ ++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */ ++#define Trp 0x0 /* 2clk */ ++#define Trc 0x3 /* 7clk */ ++#define Tchr 0x2 /* 3clk */ ++#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */ ++/**************************************/ ++ ++_TEXT_BASE: ++ .word TEXT_BASE ++ ++.globl lowlevel_init ++lowlevel_init: ++ /* memory control configuration */ ++ /* make r0 relative the current location so that it */ ++ /* reads SMRDATA out of FLASH rather than memory ! */ ++ ldr r0, =SMRDATA ++ ldr r1, _TEXT_BASE ++ sub r0, r0, r1 ++ ldr r1, =BWSCON /* Bus Width Status Controller */ ++ add r2, r0, #13*4 ++0: ++ ldr r3, [r0], #4 ++ str r3, [r1], #4 ++ cmp r2, r0 ++ bne 0b ++ ++ /* everything is fine now */ ++ mov pc, lr ++ ++ .ltorg ++/* the literal pools origin */ ++ ++SMRDATA: ++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28)) ++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) ++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) ++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) ++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) ++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) ++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) ++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) ++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) ++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) ++ .word 0x32 ++ .word 0x30 ++ .word 0x30 +Index: u-boot/board/smdk2443/config.mk +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/config.mk +@@ -0,0 +1,29 @@ ++# ++# (C) Copyright 2002 ++# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> ++# ++# SAMSUNG SMDK2443 board with S3C2443 (ARM920T) cpu ++# ++# see http://www.samsung.com/ for more information on SAMSUNG ++# ++ ++CONFIG_USB_DFU_VENDOR=0x1457 ++CONFIG_USB_DFU_PRODUCT=0x511c ++CONFIG_USB_DFU_REVISION=0x0100 ++ ++# ++# SMDK2443 has 1 bank of 64 MB DRAM ++# ++# 3000'0000 to 3400'0000 ++# ++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000 ++# optionally with a ramdisk at 3080'0000 ++# ++# we load ourself to 33F8'0000 ++# ++# download area is 3300'0000 ++# ++ ++ ++TEXT_BASE = 0x33F80000 +Index: u-boot/board/smdk2443/lowlevel_foo.lds +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/lowlevel_foo.lds +@@ -0,0 +1,56 @@ ++/* ++ * (C) Copyright 2002 ++ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") ++OUTPUT_ARCH(arm) ++ENTRY(_start) ++SECTIONS ++{ ++ . = 0x00000000; ++ ++ . = ALIGN(4); ++ .text : ++ { ++ lowlevel_foo.o (.text) ++ *(.text) ++ } ++ ++ . = ALIGN(4); ++ .rodata : { *(.rodata) } ++ ++ . = ALIGN(4); ++ .data : { *(.data) } ++ ++ . = ALIGN(4); ++ .got : { *(.got) } ++ ++ . = .; ++ __u_boot_cmd_start = .; ++ .u_boot_cmd : { *(.u_boot_cmd) } ++ __u_boot_cmd_end = .; ++ ++ . = ALIGN(4); ++ __bss_start = .; ++ .bss : { *(.bss) } ++ _end = .; ++} +Index: u-boot/board/smdk2443/flash.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/flash.c +@@ -0,0 +1,433 @@ ++/* ++ * (C) Copyright 2002 ++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com> ++ * Alex Zuepke <azu@sysgo.de> ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ */ ++ ++#include <common.h> ++ ++ulong myflush (void); ++ ++ ++#define FLASH_BANK_SIZE PHYS_FLASH_SIZE ++#define MAIN_SECT_SIZE 0x10000 /* 64 KB */ ++ ++flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; ++ ++ ++#define CMD_READ_ARRAY 0x000000F0 ++#define CMD_UNLOCK1 0x000000AA ++#define CMD_UNLOCK2 0x00000055 ++#define CMD_ERASE_SETUP 0x00000080 ++#define CMD_ERASE_CONFIRM 0x00000030 ++#define CMD_PROGRAM 0x000000A0 ++#define CMD_UNLOCK_BYPASS 0x00000020 ++ ++#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1))) ++#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1))) ++ ++#define BIT_ERASE_DONE 0x00000080 ++#define BIT_RDY_MASK 0x00000080 ++#define BIT_PROGRAM_ERROR 0x00000020 ++#define BIT_TIMEOUT 0x80000000 /* our flag */ ++ ++#define READY 1 ++#define ERR 2 ++#define TMO 4 ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++ulong flash_init (void) ++{ ++ int i, j; ++ ulong size = 0; ++ ++ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { ++ ulong flashbase = 0; ++ ++ flash_info[i].flash_id = ++#if defined(CONFIG_AMD_LV400) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV400B & FLASH_TYPEMASK); ++#elif defined(CONFIG_AMD_LV800) ++ (AMD_MANUFACT & FLASH_VENDMASK) | ++ (AMD_ID_LV800B & FLASH_TYPEMASK); ++#else ++#error "Unknown flash configured" ++#endif ++ flash_info[i].size = FLASH_BANK_SIZE; ++ flash_info[i].sector_count = CFG_MAX_FLASH_SECT; ++ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); ++ if (i == 0) ++ flashbase = PHYS_FLASH_1; ++ else ++ panic ("configured too many flash banks!\n"); ++ for (j = 0; j < flash_info[i].sector_count; j++) { ++ if (j <= 3) { ++ /* 1st one is 16 KB */ ++ if (j == 0) { ++ flash_info[i].start[j] = ++ flashbase + 0; ++ } ++ ++ /* 2nd and 3rd are both 8 KB */ ++ if ((j == 1) || (j == 2)) { ++ flash_info[i].start[j] = ++ flashbase + 0x4000 + (j - ++ 1) * ++ 0x2000; ++ } ++ ++ /* 4th 32 KB */ ++ if (j == 3) { ++ flash_info[i].start[j] = ++ flashbase + 0x8000; ++ } ++ } else { ++ flash_info[i].start[j] = ++ flashbase + (j - 3) * MAIN_SECT_SIZE; ++ } ++ } ++ size += flash_info[i].size; ++ } ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_FLASH_BASE, ++ CFG_FLASH_BASE + monitor_flash_len - 1, ++ &flash_info[0]); ++ ++ flash_protect (FLAG_PROTECT_SET, ++ CFG_ENV_ADDR, ++ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]); ++ ++ return size; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++void flash_print_info (flash_info_t * info) ++{ ++ int i; ++ ++ switch (info->flash_id & FLASH_VENDMASK) { ++ case (AMD_MANUFACT & FLASH_VENDMASK): ++ printf ("AMD: "); ++ break; ++ default: ++ printf ("Unknown Vendor "); ++ break; ++ } ++ ++ switch (info->flash_id & FLASH_TYPEMASK) { ++ case (AMD_ID_LV400B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV400BB (4Mbit)\n"); ++ break; ++ case (AMD_ID_LV800B & FLASH_TYPEMASK): ++ printf ("1x Amd29LV800BB (8Mbit)\n"); ++ break; ++ default: ++ printf ("Unknown Chip Type\n"); ++ goto Done; ++ break; ++ } ++ ++ printf (" Size: %ld MB in %d Sectors\n", ++ info->size >> 20, info->sector_count); ++ ++ printf (" Sector Start Addresses:"); ++ for (i = 0; i < info->sector_count; i++) { ++ if ((i % 5) == 0) { ++ printf ("\n "); ++ } ++ printf (" %08lX%s", info->start[i], ++ info->protect[i] ? " (RO)" : " "); ++ } ++ printf ("\n"); ++ ++ Done:; ++} ++ ++/*----------------------------------------------------------------------- ++ */ ++ ++int flash_erase (flash_info_t * info, int s_first, int s_last) ++{ ++ ushort result; ++ int iflag, cflag, prot, sect; ++ int rc = ERR_OK; ++ int chip; ++ ++ /* first look for protection bits */ ++ ++ if (info->flash_id == FLASH_UNKNOWN) ++ return ERR_UNKNOWN_FLASH_TYPE; ++ ++ if ((s_first < 0) || (s_first > s_last)) { ++ return ERR_INVAL; ++ } ++ ++ if ((info->flash_id & FLASH_VENDMASK) != ++ (AMD_MANUFACT & FLASH_VENDMASK)) { ++ return ERR_UNKNOWN_FLASH_VENDOR; ++ } ++ ++ prot = 0; ++ for (sect = s_first; sect <= s_last; ++sect) { ++ if (info->protect[sect]) { ++ prot++; ++ } ++ } ++ if (prot) ++ return ERR_PROTECTED; ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ /* Start erase on unprotected sectors */ ++ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { ++ printf ("Erasing sector %2d ... ", sect); ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ if (info->protect[sect] == 0) { /* not protected */ ++ vu_short *addr = (vu_short *) (info->start[sect]); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ *addr = CMD_ERASE_CONFIRM; ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > ++ CFG_FLASH_ERASE_TOUT) { ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ chip = TMO; ++ break; ++ } ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_ERASE_DONE) ++ chip = READY; ++ ++ if (!chip ++ && (result & 0xFFFF) & BIT_PROGRAM_ERROR) ++ chip = ERR; ++ ++ } while (!chip); ++ ++ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; ++ ++ if (chip == ERR) { ++ rc = ERR_PROG_ERROR; ++ goto outahere; ++ } ++ if (chip == TMO) { ++ rc = ERR_TIMOUT; ++ goto outahere; ++ } ++ ++ printf ("ok.\n"); ++ } else { /* it was protected */ ++ ++ printf ("protected!\n"); ++ } ++ } ++ ++ if (ctrlc ()) ++ printf ("User Interrupt!\n"); ++ ++ outahere: ++ /* allow flash to settle - wait 10 ms */ ++ udelay_masked (10000); ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash ++ */ ++ ++volatile static int write_hword (flash_info_t * info, ulong dest, ushort data) ++{ ++ vu_short *addr = (vu_short *) dest; ++ ushort result; ++ int rc = ERR_OK; ++ int cflag, iflag; ++ int chip; ++ ++ /* ++ * Check if Flash is (sufficiently) erased ++ */ ++ result = *addr; ++ if ((result & data) != data) ++ return ERR_NOT_ERASED; ++ ++ ++ /* ++ * Disable interrupts which might cause a timeout ++ * here. Remember that our exception vectors are ++ * at address 0 in the flash, and we don't want a ++ * (ticker) exception to happen while the flash ++ * chip is in programming mode. ++ */ ++ cflag = icache_status (); ++ icache_disable (); ++ iflag = disable_interrupts (); ++ ++ MEM_FLASH_ADDR1 = CMD_UNLOCK1; ++ MEM_FLASH_ADDR2 = CMD_UNLOCK2; ++ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS; ++ *addr = CMD_PROGRAM; ++ *addr = data; ++ ++ /* arm simple, non interrupt dependent timer */ ++ reset_timer_masked (); ++ ++ /* wait until flash is ready */ ++ chip = 0; ++ do { ++ result = *addr; ++ ++ /* check timeout */ ++ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { ++ chip = ERR | TMO; ++ break; ++ } ++ if (!chip && ((result & 0x80) == (data & 0x80))) ++ chip = READY; ++ ++ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) { ++ result = *addr; ++ ++ if ((result & 0x80) == (data & 0x80)) ++ chip = READY; ++ else ++ chip = ERR; ++ } ++ ++ } while (!chip); ++ ++ *addr = CMD_READ_ARRAY; ++ ++ if (chip == ERR || *addr != data) ++ rc = ERR_PROG_ERROR; ++ ++ if (iflag) ++ enable_interrupts (); ++ ++ if (cflag) ++ icache_enable (); ++ ++ return rc; ++} ++ ++/*----------------------------------------------------------------------- ++ * Copy memory to flash. ++ */ ++ ++int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) ++{ ++ ulong cp, wp; ++ int l; ++ int i, rc; ++ ushort data; ++ ++ wp = (addr & ~1); /* get lower word aligned address */ ++ ++ /* ++ * handle unaligned start bytes ++ */ ++ if ((l = addr - wp) != 0) { ++ data = 0; ++ for (i = 0, cp = wp; i < l; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ for (; i < 2 && cnt > 0; ++i) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ ++cp; ++ } ++ for (; cnt == 0 && i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ wp += 2; ++ } ++ ++ /* ++ * handle word aligned part ++ */ ++ while (cnt >= 2) { ++ data = *((vu_short *) src); ++ if ((rc = write_hword (info, wp, data)) != 0) { ++ return (rc); ++ } ++ src += 2; ++ wp += 2; ++ cnt -= 2; ++ } ++ ++ if (cnt == 0) { ++ return ERR_OK; ++ } ++ ++ /* ++ * handle unaligned tail bytes ++ */ ++ data = 0; ++ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) { ++ data = (data >> 8) | (*src++ << 8); ++ --cnt; ++ } ++ for (; i < 2; ++i, ++cp) { ++ data = (data >> 8) | (*(uchar *) cp << 8); ++ } ++ ++ return write_hword (info, wp, data); ++} +Index: u-boot/board/smdk2443/udc.c +=================================================================== +--- /dev/null ++++ u-boot/board/smdk2443/udc.c +@@ -0,0 +1,23 @@ ++ ++#include <common.h> ++#include <usbdcore.h> ++#include <s3c2440.h> ++ ++void udc_ctrl(enum usbd_event event, int param) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++ switch (event) { ++ case UDC_CTRL_PULLUP_ENABLE: ++ if (param) ++ gpio->GPGDAT |= (1 << 12); ++ else ++ gpio->GPGDAT &= ~(1 << 12); ++ break; ++ case UDC_CTRL_500mA_ENABLE: ++ /* IGNORE */ ++ break; ++ default: ++ break; ++ } ++} diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-strtoul.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-strtoul.patch new file mode 100644 index 0000000000..a88e94b006 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-strtoul.patch @@ -0,0 +1,43 @@ +Make simple_strtoul work with upper-case hex numbers. + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/lib_generic/vsprintf.c +=================================================================== +--- u-boot.orig/lib_generic/vsprintf.c ++++ u-boot/lib_generic/vsprintf.c +@@ -25,21 +25,22 @@ unsigned long simple_strtoul(const char + { + unsigned long result = 0,value; + +- if (*cp == '0') { +- cp++; +- if ((*cp == 'x') && isxdigit(cp[1])) { +- base = 16; +- cp++; +- } +- if (!base) { +- base = 8; +- } +- } + if (!base) { + base = 10; ++ if (*cp == '0') { ++ base = 8; ++ cp++; ++ if ((toupper(*cp) == 'X') && isxdigit(cp[1])) { ++ cp++; ++ base = 16; ++ } ++ } ++ } else if (base == 16) { ++ if (cp[0] == '0' && toupper(cp[1]) == 'X') ++ cp += 2; + } +- while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp) +- ? toupper(*cp) : *cp)-'A'+10) < base) { ++ while (isxdigit(*cp) && ++ (value = isdigit(*cp) ? *cp-'0' : toupper(*cp)-'A'+10) < base) { + result = result*base + value; + cp++; + } diff --git a/packages/uboot/u-boot-mkimage-gta01-native/uboot-usbtty-acm.patch b/packages/uboot/u-boot-mkimage-gta01-native/uboot-usbtty-acm.patch new file mode 100644 index 0000000000..722a227aa6 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/uboot-usbtty-acm.patch @@ -0,0 +1,1607 @@ +This patch adds cdc_acm interoperability to u-boot usbtty. + +It was taken (almost blindly) from the Linux for Siemens SX1 project on +handhelds.org. Please don't complain to me about coding style issues +or whitespace changes in this one - HW. + +Index: u-boot/drivers/usbtty.c +=================================================================== +--- u-boot.orig/drivers/usbtty.c 2007-02-08 21:11:27.000000000 +0100 ++++ u-boot/drivers/usbtty.c 2007-02-08 21:11:55.000000000 +0100 +@@ -1,6 +1,9 @@ + /* + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments ++ * ++ * (C) Copyright 2006 ++ * Bryan O'Donoghue, bodonoghue <at> codehermit.ie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by +@@ -22,26 +25,61 @@ + + #ifdef CONFIG_USB_TTY + ++#include <asm/io.h> + #include <circbuf.h> + #include <devices.h> + #include "usbtty.h" ++#include "usb_cdc_acm.h" ++#include "usbdescriptors.h" ++#include <config.h> /* If defined, override Linux identifiers with ++ * vendor specific ones */ + + #if 0 +-#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) ++//+++ debug print into memory buffer,like kernel log ++static char* log_buf = 0x10e00000; // somewhere in RAM ++static char log_str[512]; ++#define TTYDBG(fmt,args...)\ ++ sprintf(log_str,"\n[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args);\ ++ memcpy(log_buf, log_str, strlen(log_str));\ ++ log_buf+=strlen(log_str);\ ++ strcpy(log_buf,"\n---------------------------------------------------")\ ++//--- + #else + #define TTYDBG(fmt,args...) do{}while(0) + #endif + + #if 0 +-#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args) ++#define TTYDBG(fmt,args...)\ ++ serial_printf("[%s] %s %d: "fmt"\n", __FILE__,__FUNCTION__,__LINE__,##args) ++#endif ++ ++#if 0 ++#define TTYERR(fmt,args...)\ ++ serial_printf("ERROR![%s] %s %d: "fmt"\n", __FILE__,__FUNCTION__,\ ++ __LINE__,##args) + #else + #define TTYERR(fmt,args...) do{}while(0) + #endif + + /* ++ * Defines ++ */ ++#define NUM_CONFIGS 1 ++#define MAX_INTERFACES 2 ++#define NUM_ENDPOINTS 3 ++#define ACM_TX_ENDPOINT 3 ++#define ACM_RX_ENDPOINT 2 ++#define GSERIAL_TX_ENDPOINT 2 ++#define GSERIAL_RX_ENDPOINT 1 ++#define NUM_ACM_INTERFACES 2 ++#define NUM_GSERIAL_INTERFACES 1 ++#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface" ++#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface" ++ ++/* + * Buffers to hold input and output data + */ +-#define USBTTY_BUFFER_SIZE 256 ++#define USBTTY_BUFFER_SIZE 2048 + static circbuf_t usbtty_input; + static circbuf_t usbtty_output; + +@@ -50,157 +88,336 @@ + * Instance variables + */ + static device_t usbttydev; +-static struct usb_device_instance device_instance[1]; +-static struct usb_bus_instance bus_instance[1]; ++static struct usb_device_instance device_instance[1]; ++static struct usb_bus_instance bus_instance[1]; + static struct usb_configuration_instance config_instance[NUM_CONFIGS]; +-static struct usb_interface_instance interface_instance[NUM_INTERFACES]; +-static struct usb_alternate_instance alternate_instance[NUM_INTERFACES]; +-static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */ +- +-/* +- * Static allocation of urbs +- */ +-#define RECV_ENDPOINT 1 +-#define TX_ENDPOINT 2 ++static struct usb_interface_instance interface_instance[MAX_INTERFACES]; ++static struct usb_alternate_instance alternate_instance[MAX_INTERFACES]; ++/* one extra for control endpoint */ ++static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; + + /* + * Global flag + */ + int usbtty_configured_flag = 0; + +- + /* + * Serial number + */ + static char serial_number[16]; + ++ + /* +- * Descriptors ++ * Descriptors, Strings, Local variables. + */ ++ ++/* defined and used by usbdcore_ep0.c */ ++extern struct usb_string_descriptor **usb_strings; ++ ++/* Indicies, References */ ++static unsigned short rx_endpoint = 0; ++static unsigned short tx_endpoint = 0; ++static unsigned short interface_count = 0; ++static struct usb_string_descriptor *usbtty_string_table[STR_COUNT]; ++ ++/* USB Descriptor Strings */ + static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4}; + static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)]; + static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)]; + static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)]; + static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)]; +-static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)]; +- +-static struct usb_string_descriptor *usbtty_string_table[] = { +- (struct usb_string_descriptor*)wstrLang, +- (struct usb_string_descriptor*)wstrManufacturer, +- (struct usb_string_descriptor*)wstrProduct, +- (struct usb_string_descriptor*)wstrSerial, +- (struct usb_string_descriptor*)wstrConfiguration, +- (struct usb_string_descriptor*)wstrInterface +-}; +-extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */ ++static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)]; ++static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)]; + ++/* Standard USB Data Structures */ ++static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES]; ++static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS]; ++static struct usb_configuration_descriptor *configuration_descriptor = 0; + static struct usb_device_descriptor device_descriptor = { +- bLength: sizeof(struct usb_device_descriptor), +- bDescriptorType: USB_DT_DEVICE, +- bcdUSB: USB_BCD_VERSION, +- bDeviceClass: USBTTY_DEVICE_CLASS, +- bDeviceSubClass: USBTTY_DEVICE_SUBCLASS, +- bDeviceProtocol: USBTTY_DEVICE_PROTOCOL, +- bMaxPacketSize0: EP0_MAX_PACKET_SIZE, +- idVendor: CONFIG_USBD_VENDORID, +- idProduct: CONFIG_USBD_PRODUCTID, +- bcdDevice: USBTTY_BCD_DEVICE, +- iManufacturer: STR_MANUFACTURER, +- iProduct: STR_PRODUCT, +- iSerialNumber: STR_SERIAL, +- bNumConfigurations: NUM_CONFIGS +- }; +-static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = { +- { +- bLength: sizeof(struct usb_configuration_descriptor), +- bDescriptorType: USB_DT_CONFIG, +- wTotalLength: (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) + +- (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) + +- (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS), +- bNumInterfaces: NUM_INTERFACES, +- bConfigurationValue: 1, +- iConfiguration: STR_CONFIG, +- bmAttributes: BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED, +- bMaxPower: USBTTY_MAXPOWER +- }, +-}; +-static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = { +- { +- bLength: sizeof(struct usb_interface_descriptor), +- bDescriptorType: USB_DT_INTERFACE, +- bInterfaceNumber: 0, +- bAlternateSetting: 0, +- bNumEndpoints: NUM_ENDPOINTS, +- bInterfaceClass: USBTTY_INTERFACE_CLASS, +- bInterfaceSubClass: USBTTY_INTERFACE_SUBCLASS, +- bInterfaceProtocol: USBTTY_INTERFACE_PROTOCOL, +- iInterface: STR_INTERFACE +- }, ++ .bLength = sizeof(struct usb_device_descriptor), ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = cpu_to_le16(USB_BCD_VERSION), ++ .bDeviceSubClass = 0x00, ++ .bDeviceProtocol = 0x00, ++ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE, ++ .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID), ++ .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE), ++ .iManufacturer = STR_MANUFACTURER, ++ .iProduct = STR_PRODUCT, ++ .iSerialNumber = STR_SERIAL, ++ .bNumConfigurations = NUM_CONFIGS + }; +-static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = { +- { +- bLength: sizeof(struct usb_endpoint_descriptor), +- bDescriptorType: USB_DT_ENDPOINT, +- bEndpointAddress: CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT, +- bmAttributes: USB_ENDPOINT_XFER_BULK, +- wMaxPacketSize: CONFIG_USBD_SERIAL_OUT_PKTSIZE, +- bInterval: 0 +- }, +- { +- bLength: sizeof(struct usb_endpoint_descriptor), +- bDescriptorType: USB_DT_ENDPOINT, +- bEndpointAddress: CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN, +- bmAttributes: USB_ENDPOINT_XFER_BULK, +- wMaxPacketSize: CONFIG_USBD_SERIAL_IN_PKTSIZE, +- bInterval: 0 +- }, +- { +- bLength: sizeof(struct usb_endpoint_descriptor), +- bDescriptorType: USB_DT_ENDPOINT, +- bEndpointAddress: CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN, +- bmAttributes: USB_ENDPOINT_XFER_INT, +- wMaxPacketSize: CONFIG_USBD_SERIAL_INT_PKTSIZE, +- bInterval: 0 +- }, +-}; +-static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = { +- &(ep_descriptors[0]), +- &(ep_descriptors[1]), +- &(ep_descriptors[2]), ++ ++ ++/* ++ * Static CDC ACM specific descriptors ++ */ ++ ++struct acm_config_desc { ++ struct usb_configuration_descriptor configuration_desc; ++ ++ /* Master Interface */ ++ struct usb_interface_descriptor interface_desc; ++ ++ struct usb_class_header_function_descriptor usb_class_header; ++ struct usb_class_call_management_descriptor usb_class_call_mgt; ++ struct usb_class_abstract_control_descriptor usb_class_acm; ++ struct usb_class_union_function_descriptor usb_class_union; ++ struct usb_endpoint_descriptor notification_endpoint; ++ ++ /* Slave Interface */ ++ struct usb_interface_descriptor data_class_interface; ++ struct usb_endpoint_descriptor ++ data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed)); ++} __attribute__((packed)); ++ ++static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = { ++ { ++ .configuration_desc ={ ++ .bLength = ++ sizeof(struct usb_configuration_descriptor), ++ .bDescriptorType = USB_DT_CONFIG, ++ .wTotalLength = ++ cpu_to_le16(sizeof(struct acm_config_desc)), ++ .bNumInterfaces = NUM_ACM_INTERFACES, ++ .bConfigurationValue = 1, ++ .iConfiguration = STR_CONFIG, ++ .bmAttributes = ++ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, ++ .bMaxPower = USBTTY_MAXPOWER ++ }, ++ /* Interface 1 */ ++ .interface_desc = { ++ .bLength = sizeof(struct usb_interface_descriptor), ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0x01, ++ .bInterfaceClass = ++ COMMUNICATIONS_INTERFACE_CLASS_CONTROL, ++ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS, ++ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL, ++ .iInterface = STR_CTRL_INTERFACE, ++ }, ++ .usb_class_header = { ++ .bFunctionLength = ++ sizeof(struct usb_class_header_function_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_HEADER, ++ .bcdCDC = cpu_to_le16(110), ++ }, ++ .usb_class_call_mgt = { ++ .bFunctionLength = ++ sizeof(struct usb_class_call_management_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_CMF, ++ .bmCapabilities = 0x00, ++ .bDataInterface = 0x01, ++ }, ++ .usb_class_acm = { ++ .bFunctionLength = ++ sizeof(struct usb_class_abstract_control_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_ACMF, ++ .bmCapabilities = 0x00, ++ }, ++ .usb_class_union = { ++ .bFunctionLength = ++ sizeof(struct usb_class_union_function_descriptor), ++ .bDescriptorType = CS_INTERFACE, ++ .bDescriptorSubtype = USB_ST_UF, ++ .bMasterInterface = 0x00, ++ .bSlaveInterface0 = 0x01, ++ }, ++ .notification_endpoint = { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x01 | USB_DIR_IN, ++ .bmAttributes = USB_ENDPOINT_XFER_INT, ++ .wMaxPacketSize ++ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ ++ /* Interface 2 */ ++ .data_class_interface = { ++ .bLength = ++ sizeof(struct usb_interface_descriptor), ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0x01, ++ .bAlternateSetting = 0x00, ++ .bNumEndpoints = 0x02, ++ .bInterfaceClass = ++ COMMUNICATIONS_INTERFACE_CLASS_DATA, ++ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE, ++ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE, ++ .iInterface = STR_DATA_INTERFACE, ++ }, ++ .data_endpoints = { ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x02 | USB_DIR_OUT, ++ .bmAttributes = ++ USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x03 | USB_DIR_IN, ++ .bmAttributes = ++ USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ }, ++ }, ++}; ++ ++static struct rs232_emu rs232_desc={ ++ .dter = 115200, ++ .stop_bits = 0x00, ++ .parity = 0x00, ++ .data_bits = 0x08 + }; + +-/* utility function for converting char* to wide string used by USB */ +-static void str2wide (char *str, u16 * wide) +-{ +- int i; + +- for (i = 0; i < strlen (str) && str[i]; i++) +- wide[i] = (u16) str[i]; +-} ++/* ++ * Static Generic Serial specific data ++ */ ++ ++ ++struct gserial_config_desc { ++ ++ struct usb_configuration_descriptor configuration_desc; ++ struct usb_interface_descriptor ++ interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed)); ++ struct usb_endpoint_descriptor ++ data_endpoints[NUM_ENDPOINTS] __attribute__((packed)); ++ ++} __attribute__((packed)); ++ ++static struct gserial_config_desc ++gserial_configuration_descriptors[NUM_CONFIGS] ={ ++ { ++ .configuration_desc ={ ++ .bLength = sizeof(struct usb_configuration_descriptor), ++ .bDescriptorType = USB_DT_CONFIG, ++ .wTotalLength = ++ cpu_to_le16(sizeof(struct gserial_config_desc)), ++ .bNumInterfaces = NUM_GSERIAL_INTERFACES, ++ .bConfigurationValue = 1, ++ .iConfiguration = STR_CONFIG, ++ .bmAttributes = ++ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED, ++ .bMaxPower = USBTTY_MAXPOWER ++ }, ++ .interface_desc = { ++ { ++ .bLength = ++ sizeof(struct usb_interface_descriptor), ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = NUM_ENDPOINTS, ++ .bInterfaceClass = ++ COMMUNICATIONS_INTERFACE_CLASS_VENDOR, ++ .bInterfaceSubClass = ++ COMMUNICATIONS_NO_SUBCLASS, ++ .bInterfaceProtocol = ++ COMMUNICATIONS_NO_PROTOCOL, ++ .iInterface = STR_DATA_INTERFACE ++ }, ++ }, ++ .data_endpoints = { ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x01 | USB_DIR_OUT, ++ .bmAttributes = USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE), ++ .bInterval= 0xFF, ++ }, ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x02 | USB_DIR_IN, ++ .bmAttributes = USB_ENDPOINT_XFER_BULK, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ { ++ .bLength = ++ sizeof(struct usb_endpoint_descriptor), ++ .bDescriptorType = USB_DT_ENDPOINT, ++ .bEndpointAddress = 0x03 | USB_DIR_IN, ++ .bmAttributes = USB_ENDPOINT_XFER_INT, ++ .wMaxPacketSize = ++ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE), ++ .bInterval = 0xFF, ++ }, ++ }, ++ }, ++}; + + /* +- * Prototypes ++ * Static Function Prototypes + */ ++ + static void usbtty_init_strings (void); + static void usbtty_init_instances (void); + static void usbtty_init_endpoints (void); +- ++static void usbtty_init_terminal_type(short type); + static void usbtty_event_handler (struct usb_device_instance *device, +- usb_device_event_t event, int data); ++ usb_device_event_t event, int data); ++static int usbtty_cdc_setup(struct usb_device_request *request, ++ struct urb *urb); + static int usbtty_configured (void); +- + static int write_buffer (circbuf_t * buf); + static int fill_buffer (circbuf_t * buf); + + void usbtty_poll (void); +-static void pretend_interrupts (void); + ++/* utility function for converting char* to wide string used by USB */ ++static void str2wide (char *str, u16 * wide) ++{ ++ int i; ++ for (i = 0; i < strlen (str) && str[i]; i++){ ++ #if defined(__LITTLE_ENDIAN) ++ wide[i] = (u16) str[i]; ++ #elif defined(__BIG_ENDIAN) ++ wide[i] = ((u16)(str[i])<<8); ++ #else ++ #error "__LITTLE_ENDIAN or __BIG_ENDIAN undefined" ++ #endif ++ } ++} + + /* + * Test whether a character is in the RX buffer + */ ++ + int usbtty_tstc (void) + { ++ struct usb_endpoint_instance *endpoint = ++ &endpoint_instance[rx_endpoint]; ++ ++ /* If no input data exists, allow more RX to be accepted */ ++ if(usbtty_input.size <= 0){ ++ udc_unset_nak(endpoint->endpoint_address&0x03); ++ } ++ + usbtty_poll (); + return (usbtty_input.size > 0); + } +@@ -210,15 +427,21 @@ + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ ++ + int usbtty_getc (void) + { + char c; ++ struct usb_endpoint_instance *endpoint = ++ &endpoint_instance[rx_endpoint]; + + while (usbtty_input.size <= 0) { ++ udc_unset_nak(endpoint->endpoint_address&0x03); + usbtty_poll (); + } + + buf_pop (&usbtty_input, &c, 1); ++ udc_set_nak(endpoint->endpoint_address&0x03); ++ + return c; + } + +@@ -238,7 +461,6 @@ + } + } + +- + /* usbtty_puts() helper function for finding the next '\n' in a string */ + static int next_nl_pos (const char *s) + { +@@ -252,8 +474,9 @@ + } + + /* +- * Output a string to the usb client port. ++ * Output a string to the usb client port - implementing flow control + */ ++ + static void __usbtty_puts (const char *str, int len) + { + int maxlen = usbtty_output.totalsize; +@@ -261,22 +484,19 @@ + + /* break str into chunks < buffer size, if needed */ + while (len > 0) { +- space = maxlen - usbtty_output.size; ++ usbtty_poll (); + ++ space = maxlen - usbtty_output.size; + /* Empty buffer here, if needed, to ensure space... */ +- if (space <= 0) { ++ if (space) { + write_buffer (&usbtty_output); +- space = maxlen - usbtty_output.size; +- if (space <= 0) { +- space = len; /* allow old data to be overwritten. */ +- } +- } +- +- n = MIN (space, MIN (len, maxlen)); +- buf_push (&usbtty_output, str, n); ++ ++ n = MIN (space, MIN (len, maxlen)); ++ buf_push (&usbtty_output, str, n); + +- str += n; +- len -= n; ++ str += n; ++ len -= n; ++ } + } + } + +@@ -313,8 +533,10 @@ + { + int rc; + char * sn; ++ char * tt; + int snlen; + ++ /* Get serial number */ + if (!(sn = getenv("serial#"))) { + sn = "000000000000"; + } +@@ -327,6 +549,14 @@ + memcpy (serial_number, sn, snlen); + serial_number[snlen] = '\0'; + ++ /* Decide on which type of UDC device to be. ++ */ ++ ++ if(!(tt = getenv("usbtty"))) { ++ tt = "generic"; ++ } ++ usbtty_init_terminal_type(strcmp(tt,"cdc_acm")); ++ + /* prepare buffers... */ + buf_init (&usbtty_input, USBTTY_BUFFER_SIZE); + buf_init (&usbtty_output, USBTTY_BUFFER_SIZE); +@@ -337,7 +567,7 @@ + usbtty_init_strings (); + usbtty_init_instances (); + +- udc_startup_events (device_instance); /* Enable our device, initialize udc pointers */ ++ udc_startup_events (device_instance);/* Enable dev, init udc pointers */ + udc_connect (); /* Enable pullup for host detection */ + + usbtty_init_endpoints (); +@@ -362,34 +592,52 @@ + { + struct usb_string_descriptor *string; + ++ usbtty_string_table[STR_LANG] = ++ (struct usb_string_descriptor*)wstrLang; ++ + string = (struct usb_string_descriptor *) wstrManufacturer; +- string->bLength = sizeof (wstrManufacturer); ++ string->bLength = sizeof(wstrManufacturer); + string->bDescriptorType = USB_DT_STRING; + str2wide (CONFIG_USBD_MANUFACTURER, string->wData); ++ usbtty_string_table[STR_MANUFACTURER]=string; ++ + + string = (struct usb_string_descriptor *) wstrProduct; +- string->bLength = sizeof (wstrProduct); ++ string->bLength = sizeof(wstrProduct); + string->bDescriptorType = USB_DT_STRING; + str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData); ++ usbtty_string_table[STR_PRODUCT]=string; ++ + + string = (struct usb_string_descriptor *) wstrSerial; +- string->bLength = 2 + 2*strlen(serial_number); ++ string->bLength = sizeof(serial_number); + string->bDescriptorType = USB_DT_STRING; + str2wide (serial_number, string->wData); ++ usbtty_string_table[STR_SERIAL]=string; ++ + + string = (struct usb_string_descriptor *) wstrConfiguration; +- string->bLength = sizeof (wstrConfiguration); ++ string->bLength = sizeof(wstrConfiguration); + string->bDescriptorType = USB_DT_STRING; + str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData); ++ usbtty_string_table[STR_CONFIG]=string; ++ ++ ++ string = (struct usb_string_descriptor *) wstrDataInterface; ++ string->bLength = sizeof(wstrDataInterface); ++ string->bDescriptorType = USB_DT_STRING; ++ str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData); ++ usbtty_string_table[STR_DATA_INTERFACE]=string; + +- string = (struct usb_string_descriptor *) wstrInterface; +- string->bLength = sizeof (wstrInterface); ++ string = (struct usb_string_descriptor *) wstrCtrlInterface; ++ string->bLength = sizeof(wstrCtrlInterface); + string->bDescriptorType = USB_DT_STRING; +- str2wide (CONFIG_USBD_INTERFACE_STR, string->wData); ++ str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData); ++ usbtty_string_table[STR_CTRL_INTERFACE]=string; + + /* Now, initialize the string table for ep0 handling */ + usb_strings = usbtty_string_table; +-} ++} + + static void usbtty_init_instances (void) + { +@@ -400,6 +648,7 @@ + device_instance->device_state = STATE_INIT; + device_instance->device_descriptor = &device_descriptor; + device_instance->event = usbtty_event_handler; ++ device_instance->cdc_recv_setup = usbtty_cdc_setup; + device_instance->bus = bus_instance; + device_instance->configurations = NUM_CONFIGS; + device_instance->configuration_instance_array = config_instance; +@@ -415,8 +664,8 @@ + /* configuration instance */ + memset (config_instance, 0, + sizeof (struct usb_configuration_instance)); +- config_instance->interfaces = NUM_INTERFACES; +- config_instance->configuration_descriptor = config_descriptors; ++ config_instance->interfaces = interface_count; ++ config_instance->configuration_descriptor = configuration_descriptor; + config_instance->interface_instance_array = interface_instance; + + /* interface instance */ +@@ -447,17 +696,22 @@ + sizeof (struct usb_endpoint_instance)); + + endpoint_instance[i].endpoint_address = +- ep_descriptors[i - 1].bEndpointAddress; ++ ep_descriptor_ptrs[i - 1]->bEndpointAddress; + +- endpoint_instance[i].rcv_packetSize = +- ep_descriptors[i - 1].wMaxPacketSize; + endpoint_instance[i].rcv_attributes = +- ep_descriptors[i - 1].bmAttributes; ++ ep_descriptor_ptrs[i - 1]->bmAttributes; ++ ++ endpoint_instance[i].rcv_packetSize = ++ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize); ++ ++ endpoint_instance[i].tx_attributes = ++ ep_descriptor_ptrs[i - 1]->bmAttributes; + + endpoint_instance[i].tx_packetSize = +- ep_descriptors[i - 1].wMaxPacketSize; ++ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize); ++ + endpoint_instance[i].tx_attributes = +- ep_descriptors[i - 1].bmAttributes; ++ ep_descriptor_ptrs[i - 1]->bmAttributes; + + urb_link_init (&endpoint_instance[i].rcv); + urb_link_init (&endpoint_instance[i].rdy); +@@ -480,13 +734,79 @@ + int i; + + bus_instance->max_endpoints = NUM_ENDPOINTS + 1; +- for (i = 0; i <= NUM_ENDPOINTS; i++) { ++ for (i = 1; i <= NUM_ENDPOINTS; i++) { + udc_setup_ep (device_instance, i, &endpoint_instance[i]); + } + } + ++/* usbtty_init_terminal_type ++ * ++ * Do some late binding for our device type. ++ */ ++static void usbtty_init_terminal_type(short type) ++{ ++ switch(type){ ++ /* CDC ACM */ ++ case 0: ++ /* Assign endpoint descriptors */ ++ ep_descriptor_ptrs[0] = ++ &acm_configuration_descriptors[0].notification_endpoint; ++ ep_descriptor_ptrs[1] = ++ &acm_configuration_descriptors[0].data_endpoints[0]; ++ ep_descriptor_ptrs[2] = ++ &acm_configuration_descriptors[0].data_endpoints[1]; ++ ++ /* Enumerate Device Descriptor */ ++ device_descriptor.bDeviceClass = ++ COMMUNICATIONS_DEVICE_CLASS; ++ device_descriptor.idProduct = ++ cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM); ++ ++ /* Assign endpoint indices */ ++ tx_endpoint = ACM_TX_ENDPOINT; ++ rx_endpoint = ACM_RX_ENDPOINT; ++ ++ /* Configuration Descriptor */ ++ configuration_descriptor = ++ (struct usb_configuration_descriptor*) ++ &acm_configuration_descriptors; ++ ++ /* Interface count */ ++ interface_count = NUM_ACM_INTERFACES; ++ break; ++ ++ /* BULK IN/OUT & Default */ ++ case 1: ++ default: ++ /* Assign endpoint descriptors */ ++ ep_descriptor_ptrs[0] = ++ &gserial_configuration_descriptors[0].data_endpoints[0]; ++ ep_descriptor_ptrs[1] = ++ &gserial_configuration_descriptors[0].data_endpoints[1]; ++ ep_descriptor_ptrs[2] = ++ &gserial_configuration_descriptors[0].data_endpoints[2]; ++ ++ /* Enumerate Device Descriptor */ ++ device_descriptor.bDeviceClass = 0xFF; ++ device_descriptor.idProduct = ++ cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL); ++ ++ /* Assign endpoint indices */ ++ tx_endpoint = GSERIAL_TX_ENDPOINT; ++ rx_endpoint = GSERIAL_RX_ENDPOINT; ++ ++ /* Configuration Descriptor */ ++ configuration_descriptor = ++ (struct usb_configuration_descriptor*) ++ &gserial_configuration_descriptors; ++ ++ /* Interface count */ ++ interface_count = NUM_GSERIAL_INTERFACES; ++ break; ++ } ++} + +-/*********************************************************************************/ ++/******************************************************************************/ + + static struct urb *next_urb (struct usb_device_instance *device, + struct usb_endpoint_instance *endpoint) +@@ -522,82 +842,179 @@ + + static int write_buffer (circbuf_t * buf) + { +- if (!usbtty_configured ()) { +- return 0; +- } ++ if (!usbtty_configured ()) { ++ return 0; ++ } ++ ++ if (buf->size) { ++ ++ struct usb_endpoint_instance *endpoint = ++ &endpoint_instance[tx_endpoint]; ++ struct urb *current_urb = NULL; ++ char *dest; ++ ++ int space_avail; ++ int popnum, popped; ++ int total = 0; ++ ++ /* Break buffer into urb sized pieces, and link each to the endpoint */ ++ while (buf->size > 0) { ++ TTYDBG ("buf->size= %d",buf->size); ++ current_urb = next_urb (device_instance, endpoint); ++ if (!current_urb) { ++ TTYDBG ("current_urb is NULL, buf->size %d\n", ++ buf->size); ++ return total; ++ } ++ ++ dest = current_urb->buffer + ++ current_urb->actual_length; ++ ++ space_avail = ++ current_urb->buffer_length - ++ current_urb->actual_length; ++ TTYDBG ("space_avail= %d",space_avail); ++ popnum = MIN (space_avail, buf->size); ++ if (popnum == 0) ++ break; ++ ++ popped = buf_pop (buf, dest, popnum); ++ TTYDBG ("popped= %d, %s",popped, dest); ++ if (popped == 0) ++ break; ++ current_urb->actual_length += popped; ++ total += popped; ++ ++ /* If endpoint->last == 0, then transfers have not started on this endpoint */ ++ if (endpoint->last == 0) { ++ udc_endpoint_write (endpoint); ++ } ++ ++ } /* end while */ ++ TTYDBG (" total= %d",total); ++ return total; ++ } /* end if tx_urb */ + +- if (buf->size) { ++ return 0; ++} ++// static int write_buffer (circbuf_t * buf) ++// { ++// if (!usbtty_configured ()) { ++// return 0; ++// } ++// ++// struct usb_endpoint_instance *endpoint = ++// &endpoint_instance[tx_endpoint]; ++// struct urb *current_urb = NULL; ++// ++// current_urb = next_urb (device_instance, endpoint); ++// /* TX data still exists - send it now ++// */ ++// if(endpoint->sent < current_urb->actual_length){ ++// if(udc_endpoint_write (endpoint)){ ++// /* Write pre-empted by RX */ ++// return -1; ++// } ++// } ++// ++// if (buf->size) { ++// char *dest; ++// ++// int space_avail; ++// int popnum, popped; ++// int total = 0; ++// ++// /* Break buffer into urb sized pieces, ++// * and link each to the endpoint ++// */ ++// while (buf->size > 0) { ++// ++// if (!current_urb) { ++// TTYERR ("current_urb is NULL, buf->size %d\n", ++// buf->size); ++// return total; ++// } ++// ++// dest = (char*)current_urb->buffer + ++// current_urb->actual_length; ++// ++// space_avail = ++// current_urb->buffer_length - ++// current_urb->actual_length; ++// popnum = MIN (space_avail, buf->size); ++// if (popnum == 0) ++// break; ++// ++// popped = buf_pop (buf, dest, popnum); ++// if (popped == 0) ++// break; ++// current_urb->actual_length += popped; ++// total += popped; ++// ++// /* If endpoint->last == 0, then transfers have ++// * not started on this endpoint ++// */ ++// if (endpoint->last == 0) { ++// if(udc_endpoint_write (endpoint)){ ++// /* Write pre-empted by RX */ ++// return -1; ++// } ++// } ++// ++// }/* end while */ ++// return total; ++// } ++// ++// return 0; ++// } + +- struct usb_endpoint_instance *endpoint = +- &endpoint_instance[TX_ENDPOINT]; +- struct urb *current_urb = NULL; +- char *dest; +- +- int space_avail; +- int popnum, popped; +- int total = 0; +- +- /* Break buffer into urb sized pieces, and link each to the endpoint */ +- while (buf->size > 0) { +- current_urb = next_urb (device_instance, endpoint); +- if (!current_urb) { +- TTYERR ("current_urb is NULL, buf->size %d\n", +- buf->size); +- return total; +- } +- +- dest = current_urb->buffer + +- current_urb->actual_length; +- +- space_avail = +- current_urb->buffer_length - +- current_urb->actual_length; +- popnum = MIN (space_avail, buf->size); +- if (popnum == 0) +- break; +- +- popped = buf_pop (buf, dest, popnum); +- if (popped == 0) +- break; +- current_urb->actual_length += popped; +- total += popped; +- +- /* If endpoint->last == 0, then transfers have not started on this endpoint */ +- if (endpoint->last == 0) { +- udc_endpoint_write (endpoint); +- } +- +- } /* end while */ +- return total; +- } /* end if tx_urb */ ++static int fill_buffer (circbuf_t * buf) ++{ ++ struct usb_endpoint_instance *endpoint = ++ &endpoint_instance[rx_endpoint]; + +- return 0; +-} ++ if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) { ++ unsigned int nb = endpoint->rcv_urb->actual_length; ++ char *src = (char *) endpoint->rcv_urb->buffer; + ++ buf_push (buf, src, nb); ++ endpoint->rcv_urb->actual_length = 0; ++ ++ TTYDBG ("nb= %d",nb); ++ return nb; ++ } ++ ++ return 0; ++} ++/* + static int fill_buffer (circbuf_t * buf) + { + struct usb_endpoint_instance *endpoint = +- &endpoint_instance[RECV_ENDPOINT]; ++ &endpoint_instance[rx_endpoint]; + + if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) { +- unsigned int nb = endpoint->rcv_urb->actual_length; ++ unsigned int nb = 0; + char *src = (char *) endpoint->rcv_urb->buffer; ++ unsigned int rx_avail = buf->totalsize - buf->size; + +- buf_push (buf, src, nb); +- endpoint->rcv_urb->actual_length = 0; ++ if(rx_avail >= endpoint->rcv_urb->actual_length){ + ++ nb = endpoint->rcv_urb->actual_length; ++ buf_push (buf, src, nb); ++ endpoint->rcv_urb->actual_length = 0; ++ ++ } + return nb; + } +- + return 0; + } +- ++*/ + static int usbtty_configured (void) + { + return usbtty_configured_flag; + } + +-/*********************************************************************************/ ++/******************************************************************************/ + + static void usbtty_event_handler (struct usb_device_instance *device, + usb_device_event_t event, int data) +@@ -619,8 +1036,34 @@ + } + } + +-/*********************************************************************************/ ++/******************************************************************************/ + ++int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb) ++{ ++ switch (request->bRequest){ ++ ++ case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */ ++ break; ++ case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */ ++ break; ++ case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits ++ * per character */ ++ break; ++ case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */ ++ break; ++ case ACM_GET_LINE_ENCODING : /* request DTE rate, ++ * stop/parity bits */ ++ memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc)); ++ urb->actual_length = sizeof(rs232_desc); ++ ++ break; ++ default: ++ return 1; ++ } ++ return 0; ++} ++ ++/******************************************************************************/ + + /* + * Since interrupt handling has not yet been implemented, we use this function +@@ -630,36 +1073,29 @@ + void usbtty_poll (void) + { + /* New interrupts? */ +- pretend_interrupts (); ++ udc_irq(); + +- /* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */ ++ /* Write any output data to host buffer ++ * (do this before checking interrupts to avoid missing one) ++ */ + if (usbtty_configured ()) { + write_buffer (&usbtty_output); + } + + /* New interrupts? */ +- pretend_interrupts (); +- +- /* Check for new data from host.. (do this after checking interrupts to get latest data) */ ++ udc_irq(); ++ ++ /* Check for new data from host.. ++ * (do this after checking interrupts to get latest data) ++ */ + if (usbtty_configured ()) { + fill_buffer (&usbtty_input); + } + + /* New interrupts? */ +- pretend_interrupts (); +-} ++ udc_irq(); + +-static void pretend_interrupts (void) +-{ +- /* Loop while we have interrupts. +- * If we don't do this, the input chain +- * polling delay is likely to miss +- * host requests. +- */ +- while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { +- /* Handle any new IRQs */ +- omap1510_udc_irq (); +- omap1510_udc_noniso_irq (); +- } + } ++ ++ + #endif +Index: u-boot/drivers/usbtty.h +=================================================================== +--- u-boot.orig/drivers/usbtty.h 2007-02-08 21:11:27.000000000 +0100 ++++ u-boot/drivers/usbtty.h 2007-02-08 21:11:55.000000000 +0100 +@@ -2,6 +2,9 @@ + * (C) Copyright 2003 + * Gerry Hamel, geh@ti.com, Texas Instruments + * ++ * (C) Copyright 2006 ++ * Bryan O'Donoghue, bodonoghue <at> codehermit.ie, CodeHermit ++ * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or +@@ -21,44 +24,49 @@ + #ifndef __USB_TTY_H__ + #define __USB_TTY_H__ + +- + #include "usbdcore.h" ++#if defined(CONFIG_PPC) ++#include "usbdcore_mpc8xx.h" ++#elif defined(CONFIG_OMAP1510) + #include "usbdcore_omap1510.h" ++#endif + ++#include <config.h> ++#include <version.h> + +-#define NUM_CONFIGS 1 +-#define NUM_INTERFACES 1 +-#define NUM_ENDPOINTS 3 ++/* If no VendorID/ProductID is defined in config.h, pretend to be Linux ++ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */ + +-#define EP0_MAX_PACKET_SIZE 64 ++#ifndef CONFIG_USBD_VENDORID ++#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */ ++#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */ ++#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */ ++#define CONFIG_USBD_MANUFACTURER "Das U-Boot" ++#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION ++#endif /* CONFIG_USBD_VENDORID */ + + #define CONFIG_USBD_CONFIGURATION_STR "TTY via USB" +-#define CONFIG_USBD_INTERFACE_STR "Simple Serial Data Interface - Bulk Mode" +- +- +-#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2 +-#define CONFIG_USBD_SERIAL_OUT_PKTSIZE 64 +-#define CONFIG_USBD_SERIAL_IN_ENDPOINT 1 +-#define CONFIG_USBD_SERIAL_IN_PKTSIZE 64 +-#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5 +-#define CONFIG_USBD_SERIAL_INT_PKTSIZE 16 + ++#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT ++#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE ++#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT ++#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE ++#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT ++#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE ++#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE + + #define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS +-#define USBTTY_DEVICE_SUBCLASS COMMUNICATIONS_NO_SUBCLASS +-#define USBTTY_DEVICE_PROTOCOL COMMUNICATIONS_NO_PROTOCOL + +-#define USBTTY_INTERFACE_CLASS 0xFF /* Vendor Specific */ +-#define USBTTY_INTERFACE_SUBCLASS 0x02 +-#define USBTTY_INTERFACE_PROTOCOL 0x01 +- +-#define USBTTY_BCD_DEVICE 0x0 +-#define USBTTY_MAXPOWER 0x0 +- +-#define STR_MANUFACTURER 1 +-#define STR_PRODUCT 2 +-#define STR_SERIAL 3 +-#define STR_CONFIG 4 +-#define STR_INTERFACE 5 ++#define USBTTY_BCD_DEVICE 0x00 ++#define USBTTY_MAXPOWER 0x00 ++ ++#define STR_LANG 0x00 ++#define STR_MANUFACTURER 0x01 ++#define STR_PRODUCT 0x02 ++#define STR_SERIAL 0x03 ++#define STR_CONFIG 0x04 ++#define STR_DATA_INTERFACE 0x05 ++#define STR_CTRL_INTERFACE 0x06 ++#define STR_COUNT 0x07 + + #endif +Index: u-boot/drivers/usbdcore_omap1510.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_omap1510.c 2007-02-08 21:11:27.000000000 +0100 ++++ u-boot/drivers/usbdcore_omap1510.c 2007-02-08 21:11:55.000000000 +0100 +@@ -960,7 +960,7 @@ + /* Handle general USB interrupts and dispatch according to type. + * This function implements TRM Figure 14-13. + */ +-void omap1510_udc_irq (void) ++static void omap1510_udc_irq (void) + { + u16 irq_src = inw (UDC_IRQ_SRC); + int valid_irq = 0; +@@ -1000,7 +1000,7 @@ + } + + /* This function implements TRM Figure 14-26. */ +-void omap1510_udc_noniso_irq (void) ++static void omap1510_udc_noniso_irq (void) + { + unsigned short epnum; + unsigned short irq_src = inw (UDC_IRQ_SRC); +@@ -1054,6 +1054,20 @@ + irq_src); + } + ++void udc_irq(void) ++{ ++ /* Loop while we have interrupts. ++ * If we don't do this, the input chain ++ * polling delay is likely to miss ++ * host requests. ++ */ ++ while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) { ++ /* Handle any new IRQs */ ++ omap1510_udc_irq (); ++ omap1510_udc_noniso_irq (); ++ } ++} ++ + /* + ------------------------------------------------------------------------------- + */ +Index: u-boot/include/usb_cdc_acm.h +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ u-boot/include/usb_cdc_acm.h 2007-02-08 21:11:55.000000000 +0100 +@@ -0,0 +1,43 @@ ++/* ++ * (C) Copyright 2006 ++ * Bryan O'Donoghue, deckard <at> codehermit.ie, CodeHermit ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ */ ++ ++/* ACM Control Requests */ ++#define ACM_SEND_ENCAPSULATED_COMMAND 0x00 ++#define ACM_GET_ENCAPSULATED_RESPONSE 0x01 ++#define ACM_SET_COMM_FEATURE 0x02 ++#define ACM_GET_COMM_FEATRUE 0x03 ++#define ACM_CLEAR_COMM_FEATURE 0x04 ++#define ACM_SET_LINE_ENCODING 0x20 ++#define ACM_GET_LINE_ENCODING 0x21 ++#define ACM_SET_CONTROL_LINE_STATE 0x22 ++#define ACM_SEND_BREAK 0x23 ++ ++/* ACM Notification Codes */ ++#define ACM_NETWORK_CONNECTION 0x00 ++#define ACM_RESPONSE_AVAILABLE 0x01 ++#define ACM_SERIAL_STATE 0x20 ++ ++/* Format of response expected by a ACM_GET_LINE_ENCODING request */ ++struct rs232_emu{ ++ unsigned long dter; ++ unsigned char stop_bits; ++ unsigned char parity; ++ unsigned char data_bits; ++}__attribute__((packed)); +Index: u-boot/include/usbdcore_omap1510.h +=================================================================== +--- u-boot.orig/include/usbdcore_omap1510.h 2007-02-08 21:11:27.000000000 +0100 ++++ u-boot/include/usbdcore_omap1510.h 2007-02-08 21:11:55.000000000 +0100 +@@ -161,13 +161,23 @@ + #define UDC_VBUS_CTRL (1 << 19) + #define UDC_VBUS_MODE (1 << 18) + +- +-void omap1510_udc_irq(void); +-void omap1510_udc_noniso_irq(void); +- ++/* OMAP Endpoint parameters */ ++#define EP0_MAX_PACKET_SIZE 64 ++#define UDC_OUT_ENDPOINT 2 ++#define UDC_OUT_PACKET_SIZE 64 ++#define UDC_IN_ENDPOINT 1 ++#define UDC_IN_PACKET_SIZE 64 ++#define UDC_INT_ENDPOINT 5 ++#define UDC_INT_PACKET_SIZE 16 ++#define UDC_BULK_PACKET_SIZE 16 ++ ++void udc_irq (void); ++/* Flow control */ ++void udc_set_nak(int epid); ++void udc_unset_nak (int epid); + + /* Higher level functions for abstracting away from specific device */ +-void udc_endpoint_write(struct usb_endpoint_instance *endpoint); ++int udc_endpoint_write(struct usb_endpoint_instance *endpoint); + + int udc_init (void); + +Index: u-boot/include/usbdescriptors.h +=================================================================== +--- u-boot.orig/include/usbdescriptors.h 2007-02-08 21:11:27.000000000 +0100 ++++ u-boot/include/usbdescriptors.h 2007-02-08 21:11:55.000000000 +0100 +@@ -92,15 +92,17 @@ + #define COMMUNICATIONS_DEVICE_CLASS 0x02 + + /* c.f. CDC 4.2 Table 15 */ +-#define COMMUNICATIONS_INTERFACE_CLASS 0x02 ++#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02 ++#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A ++#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF + + /* c.f. CDC 4.3 Table 16 */ +-#define COMMUNICATIONS_NO_SUBCLASS 0x00 ++#define COMMUNICATIONS_NO_SUBCLASS 0x00 + #define COMMUNICATIONS_DLCM_SUBCLASS 0x01 +-#define COMMUNICATIONS_ACM_SUBCLASS 0x02 +-#define COMMUNICATIONS_TCM_SUBCLASS 0x03 ++#define COMMUNICATIONS_ACM_SUBCLASS 0x02 ++#define COMMUNICATIONS_TCM_SUBCLASS 0x03 + #define COMMUNICATIONS_MCCM_SUBCLASS 0x04 +-#define COMMUNICATIONS_CCM_SUBCLASS 0x05 ++#define COMMUNICATIONS_CCM_SUBCLASS 0x05 + #define COMMUNICATIONS_ENCM_SUBCLASS 0x06 + #define COMMUNICATIONS_ANCM_SUBCLASS 0x07 + +@@ -110,15 +112,22 @@ + #define COMMUNICATIONS_MDLM_SUBCLASS 0x0a + #define COMMUNICATIONS_OBEX_SUBCLASS 0x0b + +-/* c.f. CDC 4.6 Table 18 */ ++/* c.f. CDC 4.4 Table 17 */ ++#define COMMUNICATIONS_NO_PROTOCOL 0x00 ++#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/ ++ ++/* c.f. CDC 4.5 Table 18 */ + #define DATA_INTERFACE_CLASS 0x0a + ++/* c.f. CDC 4.6 No Table */ ++#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */ ++ + /* c.f. CDC 4.7 Table 19 */ +-#define COMMUNICATIONS_NO_PROTOCOL 0x00 ++#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */ + + + /* c.f. CDC 5.2.3 Table 24 */ +-#define CS_INTERFACE 0x24 ++#define CS_INTERFACE 0x24 + #define CS_ENDPOINT 0x25 + + /* +@@ -128,7 +137,7 @@ + * c.f. WMCD 5.3 Table 5.3 + */ + +-#define USB_ST_HEADER 0x00 ++#define USB_ST_HEADER 0x00 + #define USB_ST_CMF 0x01 + #define USB_ST_ACMF 0x02 + #define USB_ST_DLMF 0x03 +@@ -137,18 +146,18 @@ + #define USB_ST_UF 0x06 + #define USB_ST_CSF 0x07 + #define USB_ST_TOMF 0x08 +-#define USB_ST_USBTF 0x09 ++#define USB_ST_USBTF 0x09 + #define USB_ST_NCT 0x0a + #define USB_ST_PUF 0x0b + #define USB_ST_EUF 0x0c + #define USB_ST_MCMF 0x0d + #define USB_ST_CCMF 0x0e + #define USB_ST_ENF 0x0f +-#define USB_ST_ATMNF 0x10 ++#define USB_ST_ATMNF 0x10 + + #define USB_ST_WHCM 0x11 + #define USB_ST_MDLM 0x12 +-#define USB_ST_MDLMD 0x13 ++#define USB_ST_MDLMD 0x13 + #define USB_ST_DMM 0x14 + #define USB_ST_OBEX 0x15 + #define USB_ST_CS 0x16 +@@ -312,7 +321,8 @@ + u8 bDescriptorType; + u8 bDescriptorSubtype; /* 0x06 */ + u8 bMasterInterface; +- u8 bSlaveInterface0[0]; ++ //u8 bSlaveInterface0[0]; ++ u8 bSlaveInterface0; + } __attribute__ ((packed)); + + struct usb_class_country_selection_descriptor { +Index: u-boot/include/usbdcore.h +=================================================================== +--- u-boot.orig/include/usbdcore.h 2007-02-08 21:11:27.000000000 +0100 ++++ u-boot/include/usbdcore.h 2007-02-08 21:11:55.000000000 +0100 +@@ -576,6 +576,9 @@ + + void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data); + ++ /* Do cdc device specific control requests */ ++ int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb); ++ + /* bus interface */ + struct usb_bus_instance *bus; /* which bus interface driver */ + +Index: u-boot/drivers/usbdcore_ep0.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_ep0.c 2007-02-08 21:12:05.000000000 +0100 ++++ u-boot/drivers/usbdcore_ep0.c 2007-02-08 21:12:08.000000000 +0100 +@@ -223,7 +223,6 @@ + + case USB_DESCRIPTOR_TYPE_CONFIGURATION: + { +- int bNumInterface; + struct usb_configuration_descriptor + *configuration_descriptor; + struct usb_device_descriptor *device_descriptor; +@@ -256,105 +255,6 @@ + usb_configuration_descriptor), + max); + +- +- /* iterate across interfaces for specified configuration */ +- dbg_ep0 (0, "bNumInterfaces: %d", +- configuration_descriptor->bNumInterfaces); +- for (bNumInterface = 0; +- bNumInterface < +- configuration_descriptor->bNumInterfaces; +- bNumInterface++) { +- +- int bAlternateSetting; +- struct usb_interface_instance +- *interface_instance; +- +- dbg_ep0 (3, "[%d] bNumInterfaces: %d", +- bNumInterface, +- configuration_descriptor->bNumInterfaces); +- +- if (! (interface_instance = usbd_device_interface_instance (device, +- port, index, bNumInterface))) +- { +- dbg_ep0 (3, "[%d] interface_instance NULL", +- bNumInterface); +- return -1; +- } +- /* iterate across interface alternates */ +- for (bAlternateSetting = 0; +- bAlternateSetting < interface_instance->alternates; +- bAlternateSetting++) { +- /*int class; */ +- int bNumEndpoint; +- struct usb_interface_descriptor *interface_descriptor; +- +- struct usb_alternate_instance *alternate_instance; +- +- dbg_ep0 (3, "[%d:%d] alternates: %d", +- bNumInterface, +- bAlternateSetting, +- interface_instance->alternates); +- +- if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) { +- dbg_ep0 (3, "[%d] alternate_instance NULL", +- bNumInterface); +- return -1; +- } +- /* copy descriptor for this interface */ +- copy_config (urb, alternate_instance->interface_descriptor, +- sizeof (struct usb_interface_descriptor), +- max); +- +- /*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */ +- /* alternate_instance->classes, alternate_instance->endpoints); */ +- +- /* iterate across classes for this alternate interface */ +-#if 0 +- for (class = 0; +- class < alternate_instance->classes; +- class++) { +- struct usb_class_descriptor *class_descriptor; +- /*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */ +- /* class, alternate_instance->classes); */ +- if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) { +- dbg_ep0 (3, "[%d] class NULL", +- class); +- return -1; +- } +- /* copy descriptor for this class */ +- copy_config (urb, class_descriptor, +- sizeof (struct usb_class_descriptor), +- max); +- } +-#endif +- +- /* iterate across endpoints for this alternate interface */ +- interface_descriptor = alternate_instance->interface_descriptor; +- for (bNumEndpoint = 0; +- bNumEndpoint < alternate_instance->endpoints; +- bNumEndpoint++) { +- struct usb_endpoint_descriptor *endpoint_descriptor; +- dbg_ep0 (3, "[%d:%d:%d] endpoint: %d", +- bNumInterface, +- bAlternateSetting, +- bNumEndpoint, +- interface_descriptor-> +- bNumEndpoints); +- if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) { +- dbg_ep0 (3, "[%d] endpoint NULL", +- bNumEndpoint); +- return -1; +- } +- /* copy descriptor for this endpoint */ +- copy_config (urb, endpoint_descriptor, +- sizeof (struct usb_endpoint_descriptor), +- max); +- } +- } +- } +- dbg_ep0 (3, "lengths: %d %d", +- le16_to_cpu (configuration_descriptor->wTotalLength), +- urb->actual_length); + } + break; + +@@ -363,6 +263,7 @@ + struct usb_string_descriptor *string_descriptor; + + if (!(string_descriptor = usbd_get_string (index))) { ++ dbg_ep0(0, "Invalid string index %u\n", index); + return -1; + } + /*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */ +@@ -495,6 +396,8 @@ + + /* handle USB Standard Request (c.f. USB Spec table 9-2) */ + if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) { ++ if (device->device_state <= STATE_CONFIGURED) ++ return device->cdc_recv_setup(request, urb); + dbg_ep0 (1, "non standard request: %x", + request->bmRequestType & USB_REQ_TYPE_MASK); + return -1; /* Stall here */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native/unbusy-i2c.patch b/packages/uboot/u-boot-mkimage-gta01-native/unbusy-i2c.patch new file mode 100644 index 0000000000..680b301620 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/unbusy-i2c.patch @@ -0,0 +1,88 @@ +board/neo1973/gta01/gta01.c: added logic to detect pending PMU interrupts +board/neo1973/gta01/gta01.c (neo1973_new_second, neo1973_on_key_pressed): only + poll PMU if there is a pending interrupt +board/neo1973/gta01/pcf50606.c (pcf50606_initial_regs): cleared (unmasked) + SECONDM in INT1M + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/board/neo1973/gta01/gta01.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/gta01.c ++++ u-boot/board/neo1973/gta01/gta01.c +@@ -375,19 +375,60 @@ + #endif + } + ++static int pwr_int_pending(void) ++{ ++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ ++#if defined(CONFIG_ARCH_GTA01B_v4) ++ return !(gpio->GPGDAT & (1 << 1)); /* EINT9/GPG1 */ ++#else ++ return !(gpio->GPGDAT & (1 << 8)); /* EINT16/GPG8 */ ++#endif /* !CONFIG_ARCH_GTA01B_v4 */ ++} ++ ++static int have_int1(uint8_t mask) ++{ ++ static uint8_t pending = 0; ++ ++ if (pwr_int_pending()) { ++ /* ++ * We retrieve all interupts, so that we clear any stray ones ++ * in INT2 and INT3. ++ */ ++ uint8_t int1,int2,int3; ++ ++ int1 = pcf50606_reg_read(PCF50606_REG_INT1); ++ int2 = pcf50606_reg_read(PCF50606_REG_INT2); ++ int3 = pcf50606_reg_read(PCF50606_REG_INT3); ++ pending |= int1; ++ } ++ if (!(pending & mask)) ++ return 0; ++ pending &= ~mask; ++ return 1; ++} ++ + int neo1973_new_second(void) + { +- return pcf50606_reg_read(PCF50606_REG_INT1) & PCF50606_INT1_SECOND; ++ return have_int1(PCF50606_INT1_SECOND); + } + + int neo1973_on_key_pressed(void) + { +- return !(pcf50606_reg_read(PCF50606_REG_OOCS) & PFC50606_OOCS_ONKEY); ++ static int pressed = -1; ++ ++ if (pressed == -1 || ++ have_int1(PCF50606_INT1_ONKEYF | PCF50606_INT1_ONKEYR)) { ++ pressed = !(pcf50606_reg_read(PCF50606_REG_OOCS) & ++ PFC50606_OOCS_ONKEY); ++} ++ return pressed; + } + + int neo1973_aux_key_pressed(void) + { + S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); ++ + if (gpio->GPFDAT & (1 << 6)) + return 0; + return 1; +Index: u-boot/board/neo1973/gta01/pcf50606.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/pcf50606.c ++++ u-boot/board/neo1973/gta01/pcf50606.c +@@ -6,7 +6,7 @@ + const u_int8_t pcf50606_initial_regs[__NUM_PCF50606_REGS] = { + [PCF50606_REG_OOCS] = 0x00, + /* gap */ +- [PCF50606_REG_INT1M] = PCF50606_INT1_SECOND, ++ [PCF50606_REG_INT1M] = 0x00, + [PCF50606_REG_INT2M] = 0x00, + [PCF50606_REG_INT3M] = PCF50606_INT3_TSCPRES, + [PCF50606_REG_OOCC1] = PCF50606_OOCC1_RTCWAK | diff --git a/packages/uboot/u-boot-mkimage-gta01-native/usbdcore-multiple_configs.patch b/packages/uboot/u-boot-mkimage-gta01-native/usbdcore-multiple_configs.patch new file mode 100644 index 0000000000..339289699a --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/usbdcore-multiple_configs.patch @@ -0,0 +1,63 @@ +This patch fixes bugs in usbdcore*.c related to the use of devices +with multiple configurations. + +The original code made mistakes about the meaning of configuration value and +configuration index, and the resulting off-by-one errors resulted in: + +* SET_CONFIGURATION always selected the first configuration, no matter what + wValue is being passed. +* GET_DESCRIPTOR/CONFIGURATION always returned the descriptor for the first + configuration (index 0). + +Signed-off-by: Harald Welte <laforge@openmoko.org> + +Index: u-boot/drivers/usbdcore_ep0.c +=================================================================== +--- u-boot.orig/drivers/usbdcore_ep0.c 2007-03-14 20:29:05.000000000 +0100 ++++ u-boot/drivers/usbdcore_ep0.c 2007-03-14 20:29:06.000000000 +0100 +@@ -233,8 +233,8 @@ + return -1; + } + /*dbg_ep0(2, "%d %d", index, device_descriptor->bNumConfigurations); */ +- if (index > device_descriptor->bNumConfigurations) { +- dbg_ep0 (0, "index too large: %d > %d", index, ++ if (index >= device_descriptor->bNumConfigurations) { ++ dbg_ep0 (0, "index too large: %d >= %d", index, + device_descriptor-> + bNumConfigurations); + return -1; +@@ -593,13 +593,8 @@ + + case USB_REQ_SET_CONFIGURATION: + /* c.f. 9.4.7 - the top half of wValue is reserved */ +- /* */ +- if ((device->configuration = +- le16_to_cpu (request->wValue) & 0x7f) != 0) { +- /* c.f. 9.4.7 - zero is the default or addressed state, in our case this */ +- /* is the same is configuration zero */ +- device->configuration = 0; /* TBR - ?????? */ +- } ++ device->configuration = le16_to_cpu(request->wValue) & 0xff; ++ + /* reset interface and alternate settings */ + device->interface = device->alternate = 0; + +Index: u-boot/drivers/usbdcore.c +=================================================================== +--- u-boot.orig/drivers/usbdcore.c 2007-03-14 20:29:05.000000000 +0100 ++++ u-boot/drivers/usbdcore.c 2007-03-14 20:37:37.000000000 +0100 +@@ -147,12 +147,9 @@ + static struct usb_configuration_instance *usbd_device_configuration_instance (struct usb_device_instance *device, + unsigned int port, unsigned int configuration) + { +- /* XXX */ +- configuration = configuration ? configuration - 1 : 0; +- +- if (configuration >= device->configurations) { ++ if (configuration >= device->configurations) + return NULL; +- } ++ + return device->configuration_instance_array + configuration; + } + diff --git a/packages/uboot/u-boot-mkimage-gta01-native/wakeup-reason-nand-only.patch b/packages/uboot/u-boot-mkimage-gta01-native/wakeup-reason-nand-only.patch new file mode 100644 index 0000000000..132a9f8da5 --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native/wakeup-reason-nand-only.patch @@ -0,0 +1,68 @@ +This patch should get rid of spurious poweroff after booting from RAM. +Experimental. + +cpu/arm920t/start.S: record in global variable "booted_from_nand" whether we + booted from NAND or not +board/neo1973/neo1973.c (board_late_init): if booted from RAM, assume that + wakeup cause was "reset", and skip poweroff check + +- Werner Almesberger <werner@openmoko.org> + +Index: u-boot/board/neo1973/gta01/gta01.c +=================================================================== +--- u-boot.orig/board/neo1973/gta01/gta01.c ++++ u-boot/board/neo1973/gta01/gta01.c +@@ -226,12 +226,16 @@ + + int board_late_init(void) + { ++ extern unsigned char booted_from_nand; + unsigned char tmp; + char buf[32]; + + /* Initialize the Power Management Unit with a safe register set */ + pcf50606_init(); + ++ if (!booted_from_nand) ++ goto woken_by_reset; ++ + /* obtain wake-up reason, save INT1 in environment */ + tmp = pcf50606_reg_read(PCF50606_REG_INT1); + sprintf(buf, "0x%02x", tmp); +@@ -274,6 +278,7 @@ + neo1973_poweroff(); + } + ++woken_by_reset: + /* if there's no other reason, must be regular reset */ + neo1973_wakeup_cause = NEO1973_WAKEUP_RESET; + +Index: u-boot/cpu/arm920t/start.S +=================================================================== +--- u-boot.orig/cpu/arm920t/start.S ++++ u-boot/cpu/arm920t/start.S +@@ -77,6 +77,14 @@ + ************************************************************************* + */ + ++#ifdef CONFIG_S3C2410_NAND_BOOT ++.globl booted_from_nand ++booted_from_nand: ++ .word 0 ++_booted_from_nand: ++ .word booted_from_nand ++#endif /* CONFIG_S3C2410_NAND_BOOT */ ++ + _TEXT_BASE: + .word TEXT_BASE + +@@ -281,6 +289,9 @@ + #endif + 1: b 1b + done_nand_read: ++ ldr r0, _booted_from_nand ++ mov r1, #1 ++ strb r1, [r0] + #endif /* CONFIG_S3C2410_NAND_BOOT */ + done_relocate: + #endif /* CONFIG_SKIP_RELOCATE_UBOOT */ diff --git a/packages/uboot/u-boot-mkimage-gta01-native_oe.bb b/packages/uboot/u-boot-mkimage-gta01-native_oe.bb new file mode 100644 index 0000000000..2eafac668f --- /dev/null +++ b/packages/uboot/u-boot-mkimage-gta01-native_oe.bb @@ -0,0 +1,83 @@ +require uboot-gta01_svn.bb + +PV = "1.2.0+git9912121f7ed804ea58fd62f3f230b5dcfc357d88svn2238" + +SRC_URI = "git://www.denx.de/git/u-boot.git/;protocol=git;tag=9912121f7ed804ea58fd62f3f230b5dcfc357d88 \ +file://uboot-machtypes.patch;patch=1 \ +file://ext2load_hex.patch;patch=1 \ +file://uboot-mokoversion.patch;patch=1 \ +file://uboot-s3c2410-warnings-fix.patch;patch=1 \ +file://uboot-strtoul.patch;patch=1 \ +file://uboot-cramfs_but_no_jffs2.patch;patch=1 \ +file://nand-read_write_oob.patch;patch=1 \ +file://uboot-arm920t-gd_in_irq.patch;patch=1 \ +file://uboot-arm920_s3c2410_irq_demux.patch;patch=1 \ +file://uboot-s3c2410-nand.patch;patch=1 \ +file://uboot-cmd_s3c2410.patch;patch=1 \ +file://uboot-s3c2410-mmc.patch;patch=1 \ +file://env_nand_oob.patch;patch=1 \ +file://dynenv-harden.patch;patch=1 \ +file://uboot-s3c2410_fb.patch;patch=1 \ +file://uboot-20061030-qt2410.patch;patch=1 \ +file://uboot-20061030-neo1973.patch;patch=1 \ +file://uboot-s3c2410-misccr-definitions.patch;patch=1 \ +file://boot-from-ram-reloc.patch;patch=1 \ +file://boot-from-ram-and-nand.patch;patch=1 \ +file://wakeup-reason-nand-only.patch;patch=1 \ +file://uboot-neo1973-resume.patch;patch=1 \ +file://nand-dynamic_partitions.patch;patch=1 \ +file://uboot-s3c2410-norelocate_irqvec_cpy.patch;patch=1 \ +file://uboot-usbtty-acm.patch;patch=1 \ +file://uboot-s3c2410_udc.patch;patch=1 \ +file://bbt-create-optional.patch;patch=1 \ +file://nand-createbbt.patch;patch=1 \ +file://dontask.patch;patch=1 \ +file://nand-badisbad.patch;patch=1 \ +file://uboot-bbt-quiet.patch;patch=1 \ +file://raise-limits.patch;patch=1 \ +file://splashimage-command.patch;patch=1 \ +file://cmd-unzip.patch;patch=1 \ +file://enable-splash-bmp.patch;patch=1 \ +file://preboot-override.patch;patch=1 \ +file://lowlevel_foo.patch;patch=1 \ +file://default-env.patch;patch=1 \ +file://console-ansi.patch;patch=1 \ +file://boot-menu.patch;patch=1 \ +file://uboot-dfu.patch;patch=1 \ +file://uboot-neo1973-defaultenv.patch;patch=1 \ +file://uboot-nand-markbad-reallybad.patch;patch=1 \ +file://usbdcore-multiple_configs.patch;patch=1 \ +file://neo1973-chargefast.patch;patch=1 \ +file://uboot-s3c2440.patch;patch=1 \ +file://uboot-smdk2440.patch;patch=1 \ +file://uboot-hxd8.patch;patch=1 \ +file://uboot-license.patch;patch=1 \ +file://uboot-gta02.patch;patch=1 \ +file://uboot-s3c2443.patch;patch=1 \ +file://uboot-smdk2443.patch;patch=1 \ +file://unbusy-i2c.patch;patch=1 \ +" + +PROVIDES = "" +TARGET_LDFLAGS = "" + +do_quilt() { +: +} + +do_compile () { + chmod +x board/neo1973/gta01/split_by_variant.sh + oe_runmake gta01bv3_config + oe_runmake clean + oe_runmake tools +} + +do_deploy () { + install -m 0755 tools/mkimage ${STAGING_BINDIR_NATIVE}/uboot-mkimage + ln -sf ${STAGING_BINDIR_NATIVE}/uboot-mkimage ${STAGING_BINDIR_NATIVE}/mkimage +} + +do_deploy[dirs] = "${S}" +addtask deploy before do_package after do_install + + diff --git a/packages/uboot/u-boot_1.1.4.bb b/packages/uboot/u-boot_1.1.4.bb index 5c158f2401..45d24df455 100644 --- a/packages/uboot/u-boot_1.1.4.bb +++ b/packages/uboot/u-boot_1.1.4.bb @@ -25,11 +25,15 @@ SRC_URI_append_amsdelta = "\ SRC_URI_append_dht-walnut= "\ file://u-boot-dht-walnut-df2.patch;patch=1" +SRC_URI_append_avr32= "\ + http://avr32linux.org/twiki/pub/Main/UbootPatches/u-boot-1.1.4-avr1.patch.bz2;patch=1" + EXTRA_OEMAKE_gumstix = "CROSS_COMPILE=${TARGET_PREFIX} GUMSTIX_400MHZ=${GUMSTIX_400MHZ}" TARGET_LDFLAGS = "" UBOOT_MACHINE_dht-walnut = "walnut_config" +UBOOT_MACHINE_atngw100 = "atngw_config" def gumstix_mhz(d): import bb |