diff options
17 files changed, 825 insertions, 0 deletions
diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/.mtn2git_empty b/packages/ixp425-eth/ixp400-eth-1.5.1/.mtn2git_empty new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/.mtn2git_empty diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch new file mode 100644 index 0000000000..fb55f92868 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch @@ -0,0 +1,28 @@ + ixp400_eth.c | 6 +++++- + 1 files changed, 5 insertions(+), 1 deletion(-) + +Index: ixp400-eth-1.5.1-r0/ixp400_eth.c +=================================================================== +--- ixp400-eth-1.5.1-r0.orig/ixp400_eth.c ++++ ixp400-eth-1.5.1-r0/ixp400_eth.c +@@ -1848,7 +1848,11 @@ + skb->len -= header_len; + + /* fill the pkt arrival time (set at the irq callback entry) */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) + skb->stamp = irq_stamp; ++#else ++ skb_set_timestamp(skb, &irq_stamp); ++#endif + + /* fill the input device field */ + skb->dev = dev; +@@ -3040,7 +3044,7 @@ + } + + /* set port MAC addr and update the dev struct if successfull */ +-int ixp400_dev_set_mac_address(struct net_device *dev, void *addr) ++static int ixp400_dev_set_mac_address(struct net_device *dev, void *addr) + { + int res; + IxEthAccMacAddr npeMacAddr; diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch new file mode 100644 index 0000000000..83115d8efa --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch @@ -0,0 +1,18 @@ +2.6.15 needs platform_device.h + + ixp400_eth.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -65,6 +65,10 @@ + #include <linux/sysctl.h> + #include <linux/unistd.h> + ++#ifndef to_platform_device ++#include <linux/platform_device.h> ++#endif ++ + /* + * Intel IXP400 Software specific header files + */ diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch new file mode 100644 index 0000000000..3bc51f0b66 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch @@ -0,0 +1,36 @@ +This is an OpenEmbedded only patch to make the code buildable in +the OpenEmbedded environment. + +--- ixp400-eth/Makefile 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/Makefile 1970-01-01 00:00:00.000000000 +0000 +@@ -0,0 +1,30 @@ ++obj-m := ixp400_eth.o ++ ++CFLAGS_ixp400_eth.o = -DWall \ ++ -I$(IXP4XX_CSR_DIR) \ ++ -I$(OSAL_DIR)/ \ ++ -I$(OSAL_DIR)/os/linux/include/ \ ++ -I$(OSAL_DIR)/os/linux/include/modules/ \ ++ -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \ ++ -I$(OSAL_DIR)/os/linux/include/modules/core/ \ ++ -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \ ++ -I$(OSAL_DIR)/os/linux/include/core/ \ ++ -I$(OSAL_DIR)/os/linux/include/platforms/ \ ++ -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \ ++ -I$(OSAL_DIR)/os/linux/include/core/ \ ++ -I$(OSAL_DIR)/include/ \ ++ -I$(OSAL_DIR)/include/modules/ \ ++ -I$(OSAL_DIR)/include/modules/bufferMgt/ \ ++ -I$(OSAL_DIR)/include/modules/ioMem/ \ ++ -I$(OSAL_DIR)/include/modules/core/ \ ++ -I$(OSAL_DIR)/include/platforms/ \ ++ -I$(OSAL_DIR)/include/platforms/ixp400/ \ ++ -I$(OSAL_DIR)/include/platforms/ixp400/xp425/ \ ++ -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425/ \ ++ $(IX_CFLAGS) ++ ++default: ++ $(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) $(KERNEL_VERBOSE) symverfile=$(IXP4XX_CSR_SYMVERS) -C $(LINUX_SRC) SUBDIRS=$(PWD) modules ++ ++clean: ++ rm -f ixp400_eth.ko diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch new file mode 100644 index 0000000000..8508790fa5 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch @@ -0,0 +1,22 @@ +tries to go on even if queue manager initialization +fails. this is hand because you'll be allowed to +insert ixp400_eth immediately after you have removed +it, without re-inserting ixp400. + + ixp400_eth.c | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -2850,10 +2850,7 @@ static int qmgr_init(void) + /* Initialise Queue Manager */ + P_VERBOSE("Initialising Queue Manager...\n"); + if ((res = ixQMgrInit())) +- { +- P_ERROR("Error initialising queue manager!\n"); +- return -1; +- } ++ P_ERROR("Error initialising queue manager, trying to continue!\n"); + + TRACE; + diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/debug.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/debug.patch new file mode 100644 index 0000000000..c684c078d2 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/debug.patch @@ -0,0 +1,131 @@ +This patch is not necessary but helps when debugging the build + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -1350,9 +1350,10 @@ static int dev_media_check_thread (void* + + if (res != IX_ETH_ACC_SUCCESS) + { +- P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n" ++ P_WARN("%s: ixEthMiiLinkStatus failed on PHY%d.\n" + "\tCan't determine\nthe auto negotiated parameters. " + "Using default values.\n", ++ dev->name, + phyNum); + /* something is bad, gracefully stops the loop */ + priv->maintenanceCheckStopped = TRUE; +@@ -2213,7 +2214,8 @@ static int port_enable(struct net_device + IX_IEEE803_MAC_ADDRESS_SIZE); + if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr))) + { +- P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", ++ P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", ++ dev->name, + (unsigned)npeMacAddr.macAddress[0], + (unsigned)npeMacAddr.macAddress[1], + (unsigned)npeMacAddr.macAddress[2], +@@ -2707,8 +2709,8 @@ static int do_dev_ioctl(struct net_devic + down (miiAccessMutex); /* lock the MII register access mutex */ + if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out))) + { +- P_ERROR("Error reading MII reg %d on phy %d\n", +- data->reg_num, data->phy_id); ++ P_ERROR("%s: Error reading MII reg %d on phy %d\n", ++ dev->name, data->reg_num, data->phy_id); + res = -1; + } + up (miiAccessMutex); /* release the MII register access mutex */ +@@ -2720,8 +2722,8 @@ static int do_dev_ioctl(struct net_devic + down (miiAccessMutex); /* lock the MII register access mutex */ + if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in))) + { +- P_ERROR("Error writing MII reg %d on phy %d\n", +- data->reg_num, data->phy_id); ++ P_ERROR("%s: Error writing MII reg %d on phy %d\n", ++ dev->name, data->reg_num, data->phy_id); + res = -1; + } + up (miiAccessMutex); /* release the MII register access mutex */ +@@ -3049,7 +3051,8 @@ static int set_mac_address(struct net_de + /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */ + if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr))) + { +- P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", ++ P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", ++ dev->name, + (unsigned)npeMacAddr.macAddress[0], + (unsigned)npeMacAddr.macAddress[1], + (unsigned)npeMacAddr.macAddress[2], +@@ -3267,6 +3270,8 @@ static int __devinit dev_eth_probe(struc + kmalloc(sizeof(struct semaphore), GFP_KERNEL); + if (!priv->maintenanceCheckThreadComplete) + { ++ P_ERROR("%s: Failed to allocate maintenance semaphore %d\n", ++ ndev->name, priv->port_id); + goto error; + } + priv->lock = SPIN_LOCK_UNLOCKED; +@@ -3360,7 +3365,11 @@ static int __devinit dev_eth_probe(struc + + #if IS_KERNEL26 + if (register_netdev(ndev)) ++ { ++ P_ERROR("%s: Failed to register netdevice %d\n", ++ ndev->name, priv->port_id); + goto error; ++ } + #else + found_devices++; + #endif /* IS_KERNEL26 */ +@@ -3370,6 +3379,8 @@ static int __devinit dev_eth_probe(struc + /* register EthAcc callbacks for this port */ + if (dev_rxtxcallback_register(portId, (UINT32)ndev)) + { ++ P_ERROR("%s: Failed to register callback %d\n", ++ ndev->name, priv->port_id); + goto error; + } + +@@ -3393,6 +3404,7 @@ static int __devinit dev_eth_probe(struc + + /* Error handling: enter here whenever error detected */ + error: ++ P_ERROR("%s: dev_eth_probe fails\n", ndev->name); + TRACE; + + #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED +@@ -3465,21 +3477,21 @@ static int __devexit dev_eth_remove(int + { + if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEA)) + { +- P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId); ++ P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId); + } + } + if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID) + { + if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB)) + { +- P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId); ++ P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId); + } + } + if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID) + { + if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC)) + { +- P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId); ++ P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId); + } + } + +@@ -3528,6 +3540,9 @@ static int __init ixp400_eth_init(void) + TRACE; + + P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n"); ++#ifdef IX_OSAL_ENSURE_ON ++ ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL); ++#endif + + TRACE; + diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/device-name.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/device-name.patch new file mode 100644 index 0000000000..492c9274fd --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/device-name.patch @@ -0,0 +1,49 @@ + register the ethernet devices as ethX + + ixp400_eth.c | 12 +++--------- + 1 files changed, 3 insertions(+), 9 deletions(-) + +Index: ixp400-eth-1.5.1-r0/ixp400_eth.c +=================================================================== +--- ixp400-eth-1.5.1-r0.orig/ixp400_eth.c ++++ ixp400-eth-1.5.1-r0/ixp400_eth.c +@@ -160,9 +160,6 @@ + MODULE_PARM(dev_max_count, "i"); + MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize"); + +-/* devices will be called ixp0 and ixp1 */ +-#define DEVICE_NAME "ixp" +- + /* boolean values for PHY link speed, duplex, and autonegotiation */ + #define PHY_SPEED_10 0 + #define PHY_SPEED_100 1 +@@ -1579,7 +1576,7 @@ + if (request_irq(IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL, + dev_pmu_timer_os_isr, + SA_SHIRQ, +- DEVICE_NAME, ++ MODULE_NAME, + (void *)IRQ_ANY_PARAMETER)) + { + P_ERROR("Failed to reassign irq to PMU timer interrupt!\n"); +@@ -3035,8 +3032,8 @@ + if (port_id == IX_ETH_PORT_2) npe_id = "C"; + if (port_id == IX_ETH_PORT_3) npe_id = "A"; + +- P_INFO("%s%d is using NPE%s and the PHY at address %d\n", +- DEVICE_NAME, port_id, npe_id, phyAddresses[port_id]); ++ P_INFO("ethernet %d is using NPE%s and the PHY at address %d\n", ++ dev_count, npe_id, phyAddresses[port_id]); + + /* Set the MAC to the same duplex mode as the phy */ + ixEthAccPortDuplexModeSet(port_id, +@@ -3244,9 +3241,6 @@ + /* set the private port ID */ + priv->port_id = portId; + +- /* set device name */ +- sprintf(ndev->name, DEVICE_NAME"%d", priv->port_id); +- + TRACE; + + /* initialize RX pool */ diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/int-random.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/int-random.patch new file mode 100644 index 0000000000..fede9daf90 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/int-random.patch @@ -0,0 +1,16 @@ +use the ethernet device interrupts to gather entropy + + ixp400_eth.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -2864,7 +2864,7 @@ static int qmgr_init(void) + + if (request_irq(IX_OSAL_IXP400_QM1_IRQ_LVL, + dev_qmgr_os_isr, +- SA_SHIRQ, ++ SA_SHIRQ | SA_SAMPLE_RANDOM, + MODULE_NAME, + (void *)IRQ_ANY_PARAMETER)) + { diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/le.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/le.patch new file mode 100644 index 0000000000..3d569015e6 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/le.patch @@ -0,0 +1,41 @@ +little endian support + + ixp400_eth.c | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -2040,6 +2040,16 @@ static void rx_cb(UINT32 callbackTag, IX + skb->tail = skb->data + len; + skb->len = len; + ++#ifndef __ARMEB__ ++ { ++ /* Byte swap all words containing data from the buffer. */ ++ unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3); ++ unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3); ++ while (p < e) ++ *p = ntohl(*p), ++p; ++ } ++#endif ++ + #ifdef DEBUG_DUMP + skb_dump("rx", skb); + #endif +@@ -2431,6 +2441,16 @@ static int dev_hard_start_xmit(struct sk + return 0; + } + ++#ifndef __ARMEB__ ++ { ++ /* Byte swap all words containing data from the buffer. */ ++ unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3); ++ unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3); ++ while (p < e) ++ *p = ntohl(*p), ++p; ++ } ++#endif ++ + #ifdef DEBUG_DUMP + skb_dump("tx", skb); + #endif diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch new file mode 100644 index 0000000000..e23eaf5f2b --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch @@ -0,0 +1,123 @@ +Patch to use maclist - get the MAC to use from the board level +MAC repository based on the device portId. + +Signed-off-by: John Bowler <jbowler@acm.org> + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -23,10 +23,10 @@ + * This driver is written and optimized for Intel Xscale technology. + * + * SETUP NOTES: +- * By default, this driver uses predefined MAC addresses. +- * These are set in global var 'default_mac_addr' in this file. +- * If required, these can be changed at run-time using +- * the 'ifconfig' tool. ++ * By default, this driver uses MAC addresses from maclist, if ++ * these are not available the kernel api to randomly generate ++ * a locally assigned MAC address is used. The MAC can be ++ * overridden with ifconfig if absolutely necessary. + * + * Example - to set ixp0 MAC address to 00:02:B3:66:88:AA, + * run ifconfig with the following arguments: +@@ -64,6 +64,7 @@ + #include <linux/sysctl.h> + #include <linux/unistd.h> + #include <linux/version.h> ++#include <net/maclist.h> + + #if KERNEL_VERSION(2,6,0) <= LINUX_VERSION_CODE + #include <linux/workqueue.h> +@@ -130,6 +131,8 @@ static int dev_max_count = 1; /* only NP + static int dev_max_count = 2; /* only NPEB and NPEC */ + #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465) + static int dev_max_count = 3; /* all NPEs are used */ ++#else ++static int dev_max_count = -1;/* use maclist_count */ + #endif + + #ifndef CONFIG_IXP400_NAPI +@@ -614,21 +617,6 @@ static phy_cfg_t default_phy_cfg[] = + #endif + }; + +-/* Default MAC addresses for EthAcc Ports 1 and 2 (using Intel MAC prefix) +- * Default is +- * IX_ETH_PORT_1 -> MAC 00:02:b3:01:01:01 +- * IX_ETH_PORT_2 -> MAC 00:02:b3:02:02:02 +- * IX_ETH_PORT_3 -> MAC 00:02:b3:03:03:03 +-*/ +-static IxEthAccMacAddr default_mac_addr[] = +-{ +- {{0x00, 0x02, 0xB3, 0x01, 0x01, 0x01}} /* EthAcc Port 0 */ +- ,{{0x00, 0x02, 0xB3, 0x02, 0x02, 0x02}} /* EthAcc Port 1 */ +-#if defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465) +- ,{{0x00, 0x02, 0xB3, 0x03, 0x03, 0x03}} /* EthAcc Port 2 */ +-#endif +-}; +- + /* Default mapping of NpeImageIds for EthAcc Ports + * Default is + * IX_ETH_PORT_1 -> IX_ETH_NPE_B +@@ -3325,28 +3313,10 @@ static int __devinit dev_eth_probe(struc + + /* Defines the unicast MAC address + * +- * Here is a good place to read a board-specific MAC address +- * from a non-volatile memory, e.g. an external eeprom. +- * +- * This memcpy uses a default MAC address from this +- * source code. +- * +- * This can be overriden later by the (optional) command +- * +- * ifconfig ixp0 ether 0002b3010101 +- * ++ * The code reads from the maclist API. + */ +- +- memcpy(ndev->dev_addr, +- &default_mac_addr[priv->port_id].macAddress, +- IX_IEEE803_MAC_ADDRESS_SIZE); +- +- /* possibly remove this test and the message when a valid MAC address +- * is not hardcoded in the driver source code. +- */ +- if (is_valid_ether_addr(ndev->dev_addr)) +- { +- P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", ++ maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id); ++ P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n", + (unsigned)ndev->dev_addr[0], + (unsigned)ndev->dev_addr[1], + (unsigned)ndev->dev_addr[2], +@@ -3354,7 +3324,6 @@ static int __devinit dev_eth_probe(struc + (unsigned)ndev->dev_addr[4], + (unsigned)ndev->dev_addr[5], + priv->port_id); +- } + + /* Set/update the internal packet size + * This can be overriden later by the command +@@ -3562,12 +3531,15 @@ static int __init ixp400_eth_init(void) + + TRACE; + +- /* check module parameter range */ +- if (dev_max_count == 0 || dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS) +- { +- P_ERROR("Number of ports supported is dev_max_count <= %d\n", IX_ETH_ACC_NUMBER_OF_PORTS); +- return -1; +- } ++ /* fix dev_max_count to maclist_count - the actual number of ++ * available MACs ++ */ ++ if (dev_max_count <= 0 || (dev_max_count > maclist_count() && maclist_count() > 0)) ++ dev_max_count = maclist_count(); ++ if (dev_max_count <= 0) ++ dev_max_count = 1; ++ else if (dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS) ++ dev_max_count = IX_ETH_ACC_NUMBER_OF_PORTS; + + TRACE; + diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf b/packages/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf new file mode 100644 index 0000000000..f08b9a404c --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf @@ -0,0 +1,4 @@ +# Add an alias for eth0 to ixp400_eth to cause the S40networking +# init script to load the ixp400_eth driver on the first boot +alias eth0 ixp400_eth +options ixp400_eth dev_max_count=1
\ No newline at end of file diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/module-param.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/module-param.patch new file mode 100644 index 0000000000..c54c45d716 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/module-param.patch @@ -0,0 +1,62 @@ + ixp400_eth.c | 32 ++++++++++++++++++++++++++++++++ + 1 files changed, 32 insertions(+) + +Index: ixp400_eth/ixp400_eth.c +=================================================================== +--- ixp400_eth.orig/ixp400_eth.c ++++ ixp400_eth/ixp400_eth.c +@@ -142,22 +142,54 @@ + + static int datapath_poll = 1; /* default : rx/tx polling, not interrupt driven*/ + ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(ixp400_netdev_max_backlog, "i"); ++#else ++module_param(ixp400_netdev_max_backlog, int, 0644); ++#endif + MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)"); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(datapath_poll, "i"); ++#else ++module_param(datapath_poll, int, 0644); ++#endif + MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts"); + #endif /* CONFIG_IXP400_NAPI */ ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(npe_learning, "i"); ++#else ++module_param(npe_learning, int, 0644); ++#endif + MODULE_PARM_DESC(npe_learning, "If non-zero, NPE MAC Address Learning & Filtering feature will be enabled"); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(log_level, "i"); ++#else ++module_param(log_level, int, 0644); ++#endif + MODULE_PARM_DESC(log_level, "Set log level: 0 - None, 1 - Verbose, 2 - Debug"); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(no_ixp400_sw_init, "i"); ++#else ++module_param(no_ixp400_sw_init, int, 0644); ++#endif + MODULE_PARM_DESC(no_ixp400_sw_init, "If non-zero, do not initialise Intel IXP400 Software Release core components"); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(no_phy_scan, "i"); ++#else ++module_param(no_phy_scan, int, 0644); ++#endif + MODULE_PARM_DESC(no_phy_scan, "If non-zero, use hard-coded phy addresses"); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(phy_reset, "i"); ++#else ++module_param(phy_reset, int, 0644); ++#endif + MODULE_PARM_DESC(phy_reset, "If non-zero, reset the phys"); ++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16) + MODULE_PARM(dev_max_count, "i"); ++#else ++module_param(dev_max_count, int, 0644); ++#endif + MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize"); + + /* boolean values for PHY link speed, duplex, and autonegotiation */ diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch new file mode 100644 index 0000000000..6891b6b4a9 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch @@ -0,0 +1,54 @@ +--- ixp400_eth/ixp400_eth.c~ 2006-01-09 01:03:11.000000000 +1030 ++++ ixp400_eth/ixp400_eth.c 2006-01-09 01:05:27.000000000 +1030 +@@ -139,12 +139,12 @@ + * skbuf to push into the linux stack, and avoid the performance degradations + * during overflow. + */ +-static int netdev_max_backlog = 290; ++static int ixp400_netdev_max_backlog = 290; + + static int datapath_poll = 1; /* default : rx/tx polling, not interrupt driven*/ + +-MODULE_PARM(netdev_max_backlog, "i"); +-MODULE_PARM_DESC(netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)"); ++MODULE_PARM(ixp400_netdev_max_backlog, "i"); ++MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)"); + MODULE_PARM(datapath_poll, "i"); + MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts"); + #endif /* CONFIG_IXP400_NAPI */ +@@ -213,7 +213,7 @@ + * high traffic rates. To measure the maximum throughput between the + * ports of the driver, + * - Modify /proc/sys/net/core/netdev_max_backlog value in the kernel +- * - Adjust netdev_max_backlog=n in the driver's command line ++ * - Adjust ixp400_netdev_max_backlog=n in the driver's command line + * in order to get the best rates depending on the testing tool + * and the OS load. + * +@@ -1997,7 +1997,7 @@ + /* check if the system accepts more traffic and + * against chained mbufs + */ +- if ((qlevel < netdev_max_backlog) ++ if ((qlevel < ixp400_netdev_max_backlog) + && (IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(mbuf) == NULL)) + #else + /* check against chained mbufs +@@ -3776,13 +3776,13 @@ + #ifndef CONFIG_IXP400_NAPI + /* set the softirq rx queue thresholds + * (These numbers are based on tuning experiments) +- * maxbacklog = (netdev_max_backlog * 10) / 63; ++ * maxbacklog = (ixp400_netdev_max_backlog * 10) / 63; + */ +- if (netdev_max_backlog == 0) ++ if (ixp400_netdev_max_backlog == 0) + { +- netdev_max_backlog = 290; /* system default */ ++ ixp400_netdev_max_backlog = 290; /* system default */ + } +- netdev_max_backlog /= BACKLOG_TUNE; ++ ixp400_netdev_max_backlog /= BACKLOG_TUNE; + + TRACE; + #endif diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/params.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/params.patch new file mode 100644 index 0000000000..86011deaaa --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/params.patch @@ -0,0 +1,75 @@ +*** ixp/ixp400_eth.c.orig Wed Jun 7 21:31:59 2006 +--- ixp/ixp400_eth.c Fri Jun 9 14:55:18 2006 +*************** +*** 112,135 **** + #define MOD_VERSION "1.5" + + /* Module parameters */ +! static int npe_learning = 1; /* default : NPE learning & filtering enable */ +! static int log_level = 0; /* default : no log */ +! static int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */ +! static int no_phy_scan = 0; /* default : do phy discovery */ +! static int phy_reset = 0; /* default : mo phy reset */ + + /* maximum number of ports supported by this driver ixp0, ixp1 .... + * The default is to configure all ports defined in EthAcc component + */ + #ifdef CONFIG_IXP400_ETH_NPEC_ONLY +! static int dev_max_count = 1; /* only NPEC is used */ +! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY) +! static int dev_max_count = 1; /* only NPEB is used */ + #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\ + || defined (CONFIG_ARCH_ADI_COYOTE) +! static int dev_max_count = 2; /* only NPEB and NPEC */ + #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465) +! static int dev_max_count = 3; /* all NPEs are used */ + #endif + + #ifndef CONFIG_IXP400_NAPI +--- 112,136 ---- + #define MOD_VERSION "1.5" + + /* Module parameters */ +! /* gcc 4.1.1+kernel2.6.16 do not like it if these are static! */ +! int npe_learning = 1; /* default : NPE learning & filtering enable */ +! int log_level = 0; /* default : no log */ +! int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */ +! int no_phy_scan = 0; /* default : do phy discovery */ +! int phy_reset = 0; /* default : mo phy reset */ + + /* maximum number of ports supported by this driver ixp0, ixp1 .... + * The default is to configure all ports defined in EthAcc component + */ + #ifdef CONFIG_IXP400_ETH_NPEC_ONLY +! int dev_max_count = 1; /* only NPEC is used */ +! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY) +! int dev_max_count = 1; /* only NPEB is used */ + #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\ + || defined (CONFIG_ARCH_ADI_COYOTE) +! int dev_max_count = 2; /* only NPEB and NPEC */ + #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465) +! int dev_max_count = 3; /* all NPEs are used */ + #endif + + #ifndef CONFIG_IXP400_NAPI +*************** +*** 138,146 **** + * skbuf to push into the linux stack, and avoid the performance degradations + * during overflow. + */ +! static int ixp400_netdev_max_backlog = 290; + +! static int datapath_poll = 1; /* default : rx/tx polling, not interrupt driven*/ + + MODULE_PARM(ixp400_netdev_max_backlog, "i"); + MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)"); +--- 139,147 ---- + * skbuf to push into the linux stack, and avoid the performance degradations + * during overflow. + */ +! int ixp400_netdev_max_backlog = 290; + +! int datapath_poll = 1; /* default : rx/tx polling, not interrupt driven*/ + + MODULE_PARM(ixp400_netdev_max_backlog, "i"); + MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)"); diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch new file mode 100644 index 0000000000..64fb310ee5 --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch @@ -0,0 +1,50 @@ +poll controller support + + ixp400_eth.c | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -348,6 +348,12 @@ static int dev_pmu_timer_init(void); + extern void + ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId); + ++#ifdef CONFIG_NET_POLL_CONTROLLER ++/* poll controller (needed for netconsole et al) */ ++static void ++ixp425eth_poll_controller(struct net_device *dev); ++#endif ++ + /* Private device data */ + typedef struct { + spinlock_t lock; /* multicast management lock */ +@@ -3060,6 +3066,19 @@ static int set_mac_address(struct net_de + return 0; + } + ++#ifdef CONFIG_NET_POLL_CONTROLLER ++/* ++ * Polling receive - used by netconsole and other diagnostic tools ++ * to allow network i/o with interrupts disabled. ++ * (stolen from 8139too.c by siddy) ++ */ ++static void ixp425eth_poll_controller(struct net_device *dev) ++{ ++ disable_irq(dev->irq); ++ dev_qmgr_os_isr(dev->irq, dev, NULL); ++ enable_irq(dev->irq); ++} ++#endif + + /* + * TX QDISC +@@ -3270,6 +3289,9 @@ static int __devinit dev_eth_probe(struc + ndev->get_stats = dev_get_stats; + ndev->set_multicast_list = dev_set_multicast_list; + ndev->flags |= IFF_MULTICAST; ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ ndev->poll_controller = ixp425eth_poll_controller; ++#endif + + ndev->set_mac_address = set_mac_address; + diff --git a/packages/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch b/packages/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch new file mode 100644 index 0000000000..2ddc98938a --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch @@ -0,0 +1,29 @@ +devices must be explicitely stopped when +the driver is going do be removed, otherwise +it will simply hang. + + ixp400_eth.c | 13 ++++++++++--- + 1 file changed, 10 insertions(+), 3 deletions(-) + +--- ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 ++++ ixp400-eth/ixp400_eth.c 1970-01-01 00:00:00.000000000 +0000 +@@ -3800,9 +3800,16 @@ void __exit ixp400_eth_exit(void) + + TRACE; + +- /* We can only get here when the module use count is 0, +- * so there's no need to stop devices. +- */ ++ /* stop devices */ ++ ++#if IS_KERNEL26 ++ for (dev_count = 0; ++ dev_count < dev_max_count; /* module parameter */ ++ dev_count++) ++ { ++ do_dev_stop(platform_get_drvdata(&ixp400_eth_devices[dev_count])); ++ } ++#endif + + if (no_ixp400_sw_init == 0) /* module parameter */ + { diff --git a/packages/ixp425-eth/ixp400-eth_1.5.1.bb b/packages/ixp425-eth/ixp400-eth_1.5.1.bb new file mode 100644 index 0000000000..fe9b166ded --- /dev/null +++ b/packages/ixp425-eth/ixp400-eth_1.5.1.bb @@ -0,0 +1,87 @@ +DEFAULT_PREFERENCE = "-1" +# This is the Intel GPL IXP4XX ethernet driver (Linux) plus patches +# to make it work on 2.6 kernels. +# +MAINTAINER = "NSLU2 Linux <nslu2-linux@yahoogroups.com>" +HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp420.htm" +LICENSE = "GPL" +PR = "r0" + +DEPENDS = "ixp-osal" +DEPENDS = "ixp4xx-csr" +RDEPENDS = "ixp4xx-csr" + +SRC_URI = "ftp://aiedownload.intel.com/df-support/9519/eng/GPL_ixp400LinuxEthernetDriverPatch-1_5_1.zip" +SRC_URI += "file://2.6.14.patch;patch=1" +SRC_URI += "file://2.6.15.patch;patch=1" +SRC_URI += "file://device-name.patch;patch=1" +SRC_URI += "file://poll-controller.patch;patch=1" +SRC_URI += "file://le.patch;patch=1" +SRC_URI += "file://int-random.patch;patch=1" +SRC_URI += "file://stop-on-rmmod.patch;patch=1" +SRC_URI += "file://continue-if-qmgr-init-fails.patch;patch=1" +SRC_URI += "file://netdev_max_backlog.patch;patch=1" +SRC_URI += "file://debug.patch;patch=1" +SRC_URI += "file://Makefile.patch;patch=1" +SRC_URI += "file://params.patch;patch=1" +SRC_URI += "file://module-param.patch;patch=1" +SRC_URI += "file://modprobe.conf" + +S = "${WORKDIR}" + +COMPATIBLE_HOST = "^arm.*-linux.*" + +PROVIDES = "virtual/ixp-eth" +RPROVIDES = "ixp-eth" + +inherit module + +# This is a somewhat arbitrary choice: +OSAL_DIR = "${STAGING_KERNEL_DIR}/ixp_osal" + +IX_TARGET = "linux${ARCH_BYTE_SEX}" +IX_ENSURE = "" +#IX_ENSURE = "-DIX_OSAL_ENSURE_ON=1" +# The following controls the name of the ethernet devices which get +# registered, the default (if this is empty) is ixp0, ixp1, otherwise +# it is eth0, eth1 +DEVICE_NAME = "-DIX_DEVICE_NAME_ETH=1" + +IXP4XX_CSR_SYMVERS = "${STAGING_KERNEL_DIR}/ixp400-csr.symvers" + +EXTRA_OEMAKE = "'PWD=${S}' \ + 'IX_TARGET=${IX_TARGET}' \ + 'IXP4XX_CSR_DIR=${STAGING_INCDIR}/linux/ixp4xx-csr' \ + 'IXP4XX_CSR_SYMVERS=${IXP4XX_CSR_SYMVERS}' \ + 'OSAL_DIR=${OSAL_DIR}' \ + 'IX_CFLAGS=-DIX_UTOPIAMODE=0 -DIX_MPHYSINGLEPORT=1 ${IX_ENSURE} ${DEVICE_NAME} -DIX_COMPONENT_NAME=-1' \ + 'LINUX_SRC=${STAGING_KERNEL_DIR}' \ + 'LINUX_CROSS_COMPILE=${HOST_PREFIX}' \ + " + +# This is to check for unresolved symbol errors and ensure the build +# fails, an error here probably means too much as been deconfigured +# out of ixp4xx-csr. +KCONFIG_FILE = "${STAGING_KERNEL_DIR}/kernel-config" +do_compile_append () { + . '${KCONFIG_FILE}' + echo "MODPOST: checking that all symbols are resolved" + if '${STAGING_KERNEL_DIR}/scripts/mod/modpost' \ + ${CONFIG_MODVERSIONS:+-m} \ + ${CONFIG_MODULE_SRCVERSION_ALL:+-a} \ + -i '${STAGING_KERNEL_DIR}/ixp400-csr.symvers' \ + ixp400_eth.o 2>&1 | egrep . + then + echo "MODPOST errors - see above" + return 1 + else + return 0 + fi +} + +do_install () { + install -d ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net + install -m 0644 ixp400_eth.ko ${D}${base_libdir}/modules/${KERNEL_VERSION}/kernel/drivers/net/ + install -d ${D}${sysconfdir}/modprobe.d + install -m 0644 modprobe.conf ${D}${sysconfdir}/modprobe.d/eth0 +} |