Disable bk EOLN_NATIVE conversions on all files in packages FILESPATHs, to prevent it screwing up patches.

BKrev: 4190111fA4MuVozAqwE7xOSL9fr-TA

3 files changed, 458 insertions, 0 deletions

diff --git a/slutils/slutils-0.1.0/sltime/mtduser.h b/slutils/slutils-0.1.0/sltime/mtduser.h
index e69de29bb2..ece475399e 100644
--- a/slutils/slutils-0.1.0/sltime/mtduser.h
+++ b/slutils/slutils-0.1.0/sltime/mtduser.h
@@ -0,0 +1,344 @@
+
+/* $Id$ */
+
+/*
+ * ChangeLog:
+ *     19-Sep-2002 Lineo Japan, Inc.  add erase-by-force mode
+ *
+ */
+
+/*
+ * ChangeLog:
+ *     19-Sep-2002 Lineo Japan, Inc.  add erase-by-force mode
+ *     23-Oct-2002 SHARP  add definitions for CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS
+ *
+ */
+
+#ifndef __MTD_MTD_H__
+#define __MTD_MTD_H__
+
+#ifdef __KERNEL__
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/mtd/compatmac.h>
+#include <linux/module.h>
+#include <linux/uio.h>
+
+#endif /* __KERNEL__ */
+
+struct erase_info_user {
+	u_int32_t start;
+	u_int32_t length;
+};
+
+struct mtd_oob_buf {
+	u_int32_t start;
+	u_int32_t length;
+	unsigned char *ptr;
+};
+
+
+#define MTD_CHAR_MAJOR 90
+#define MTD_BLOCK_MAJOR 31
+#define MAX_MTD_DEVICES 16
+
+
+
+#define MTD_ABSENT		0
+#define MTD_RAM			1
+#define MTD_ROM			2
+#define MTD_NORFLASH		3
+#define MTD_NANDFLASH		4
+#define MTD_PEROM		5
+#define MTD_OTHER		14
+#define MTD_UNKNOWN		15
+
+
+
+#define MTD_CLEAR_BITS		1       // Bits can be cleared (flash)
+#define MTD_SET_BITS		2       // Bits can be set
+#define MTD_ERASEABLE		4       // Has an erase function
+#define MTD_WRITEB_WRITEABLE	8       // Direct IO is possible
+#define MTD_VOLATILE		16      // Set for RAMs
+#define MTD_XIP			32	// eXecute-In-Place possible
+#define MTD_OOB			64	// Out-of-band data (NAND flash)
+#define MTD_ECC			128	// Device capable of automatic ECC
+
+// Some common devices / combinations of capabilities
+#define MTD_CAP_ROM		0
+#define MTD_CAP_RAM		(MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
+#define MTD_CAP_NORFLASH        (MTD_CLEAR_BITS|MTD_ERASEABLE)
+#define MTD_CAP_NANDFLASH       (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB)
+#define MTD_WRITEABLE		(MTD_CLEAR_BITS|MTD_SET_BITS)
+
+
+// Types of automatic ECC/Checksum available
+#define MTD_ECC_NONE		0 	// No automatic ECC available
+#define MTD_ECC_RS_DiskOnChip	1	// Automatic ECC on DiskOnChip
+#define MTD_ECC_SW		2	// SW ECC for Toshiba & Samsung devices
+
+struct mtd_info_user {
+	u_char type;
+	u_int32_t flags;
+	u_int32_t size;	 // Total size of the MTD
+	u_int32_t erasesize;
+	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
+	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	u_int32_t ecctype;
+	u_int32_t eccsize;
+};
+
+struct region_info_user {
+	u_int32_t offset;		/* At which this region starts, 
+					 * from the beginning of the MTD */
+	u_int32_t erasesize;		/* For this region */
+	u_int32_t numblocks;		/* Number of blocks in this region */
+	u_int32_t regionindex;
+};
+
+#ifdef CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS
+struct read_laddr_info_user {
+	loff_t from;
+	size_t len;
+	u_char* buf;
+};
+
+struct write_laddr_info_user {
+	loff_t to;
+	size_t len;
+	u_char* buf;
+};    
+#endif
+
+#define MEMGETINFO              _IOR('M', 1, struct mtd_info_user)
+#define MEMERASE                _IOW('M', 2, struct erase_info_user)
+#define MEMWRITEOOB             _IOWR('M', 3, struct mtd_oob_buf)
+#define MEMREADOOB              _IOWR('M', 4, struct mtd_oob_buf)
+#define MEMLOCK                 _IOW('M', 5, struct erase_info_user)
+#define MEMUNLOCK               _IOW('M', 6, struct erase_info_user)
+#define MEMGETREGIONCOUNT	_IOR('M', 7, int)
+#define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
+#ifdef CONFIG_MTD_NAND_ERASE_BY_FORCE
+#define MEMERASEBYFORCE         _IOW('M', 9, struct erase_info_user)
+#else
+#define MEMIOCTLRSV9            _IO('M', 9)
+#endif
+#ifdef CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS
+#define MEMCLEANUPLADDR         _IO('M', 10)
+#define MEMREADLADDR            _IOR('M', 11, struct read_laddr_info_user)
+#define MEMWRITELADDR           _IOW('M', 12, struct write_laddr_info_user)
+#else
+#define MEMIOCTLRSV10           _IO('M', 10)
+#define MEMIOCTLRSV11           _IO('M', 11)
+#define MEMIOCTLRSV12           _IO('M', 12)
+#endif
+
+#ifndef __KERNEL__
+
+typedef struct mtd_info_user mtd_info_t;
+typedef struct erase_info_user erase_info_t;
+typedef struct region_info_user region_info_t;
+
+	/* User-space ioctl definitions */
+
+
+#else /* __KERNEL__ */
+
+
+#define MTD_ERASE_PENDING      	0x01
+#define MTD_ERASING		0x02
+#define MTD_ERASE_SUSPEND	0x04
+#define MTD_ERASE_DONE          0x08
+#define MTD_ERASE_FAILED        0x10
+
+struct erase_info {
+	struct mtd_info *mtd;
+	u_int32_t addr;
+	u_int32_t len;
+	u_long time;
+	u_long retries;
+	u_int dev;
+	u_int cell;
+	void (*callback) (struct erase_info *self);
+	u_long priv;
+	u_char state;
+	struct erase_info *next;
+#ifdef CONFIG_MTD_NAND_ERASE_BY_FORCE
+	int by_force;
+#endif
+};
+
+struct mtd_erase_region_info {
+	u_int32_t offset;			/* At which this region starts, from the beginning of the MTD */
+	u_int32_t erasesize;		/* For this region */
+	u_int32_t numblocks;		/* Number of blocks of erasesize in this region */
+};
+
+struct mtd_info {
+	u_char type;
+	u_int32_t flags;
+	u_int32_t size;	 // Total size of the MTD
+
+	/* "Major" erase size for the device. Naïve users may take this
+	 * to be the only erase size available, or may use the more detailed
+	 * information below if they desire
+	 */
+	u_int32_t erasesize;
+
+	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
+	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	u_int32_t ecctype;
+	u_int32_t eccsize;
+
+	// Kernel-only stuff starts here.
+	char *name;
+	int index;
+
+	/* Data for variable erase regions. If numeraseregions is zero,
+	 * it means that the whole device has erasesize as given above. 
+	 */
+	int numeraseregions;
+	struct mtd_erase_region_info *eraseregions; 
+
+	/* This really shouldn't be here. It can go away in 2.5 */
+	u_int32_t bank_size;
+
+	struct module *module;
+	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
+
+	/* This stuff for eXecute-In-Place */
+	int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
+
+	/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
+	void (*unpoint) (struct mtd_info *mtd, u_char * addr);
+
+
+	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+	int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, int oobsel);
+	int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, int oobsel);
+
+	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+
+	/* 
+	 * Methods to access the protection register area, present in some 
+	 * flash devices. The user data is one time programmable but the
+	 * factory data is read only. 
+	 */
+	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	/* This function is not yet implemented */
+	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+
+	/* iovec-based read/write methods. We need these especially for NAND flash,
+	   with its limited number of write cycles per erase.
+	   NB: The 'count' parameter is the number of _vectors_, each of 
+	   which contains an (ofs, len) tuple.
+	*/
+	int (*readv) (struct mtd_info *mtd, struct iovec *vecs, unsigned long count, loff_t from, size_t *retlen);
+	int (*readv_ecc) (struct mtd_info *mtd, struct iovec *vecs, unsigned long count, loff_t from, 
+		size_t *retlen, u_char *eccbuf, int oobsel);
+	int (*writev) (struct mtd_info *mtd, const struct iovec *vecs, unsigned long count, loff_t to, size_t *retlen);
+	int (*writev_ecc) (struct mtd_info *mtd, const struct iovec *vecs, unsigned long count, loff_t to, 
+		size_t *retlen, u_char *eccbuf, int oobsel);
+
+	/* Sync */
+	void (*sync) (struct mtd_info *mtd);
+
+	/* Chip-supported device locking */
+	int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
+	int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
+
+	/* Power Management functions */
+	int (*suspend) (struct mtd_info *mtd);
+	void (*resume) (struct mtd_info *mtd);
+
+#ifdef CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS
+	/* Logical Address Access functions */
+	int (*cleanup_laddr)(struct mtd_info *mtd);
+	int (*read_laddr)(struct mtd_info *mtd, loff_t from, size_t len, u_char *buf);
+	int (*write_laddr)(struct mtd_info *mtd, loff_t to, size_t len, u_char *buf, int (*eraseproc)(struct mtd_info *mtd, u_int32_t addr));
+#endif
+
+	void *priv;
+};
+
+
+	/* Kernel-side ioctl definitions */
+
+extern int add_mtd_device(struct mtd_info *mtd);
+extern int del_mtd_device (struct mtd_info *mtd);
+
+extern struct mtd_info *__get_mtd_device(struct mtd_info *mtd, int num);
+
+static inline struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num)
+{
+	struct mtd_info *ret;
+	
+	ret = __get_mtd_device(mtd, num);
+
+	if (ret && ret->module && !try_inc_mod_count(ret->module))
+		return NULL;
+
+	return ret;
+}
+
+static inline void put_mtd_device(struct mtd_info *mtd)
+{
+       if (mtd->module)
+	       __MOD_DEC_USE_COUNT(mtd->module);
+}
+
+
+struct mtd_notifier {
+	void (*add)(struct mtd_info *mtd);
+	void (*remove)(struct mtd_info *mtd);
+	struct mtd_notifier *next;
+};
+
+
+extern void register_mtd_user (struct mtd_notifier *new);
+extern int unregister_mtd_user (struct mtd_notifier *old);
+
+
+#ifndef MTDC
+#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
+#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
+#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
+#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
+#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
+#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
+#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
+#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
+#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
+#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
+#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0) 
+#endif /* MTDC */
+
+/*
+ * Debugging macro and defines
+ */
+#define MTD_DEBUG_LEVEL0	(0)	/* Quiet   */
+#define MTD_DEBUG_LEVEL1	(1)	/* Audible */
+#define MTD_DEBUG_LEVEL2	(2)	/* Loud    */
+#define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
+
+#ifdef CONFIG_MTD_DEBUG
+#define DEBUG(n, args...)			\
+	if (n <=  CONFIG_MTD_DEBUG_VERBOSE) {	\
+		printk(KERN_INFO args);	\
+	}
+#else /* CONFIG_MTD_DEBUG */
+#define DEBUG(n, args...)
+#endif /* CONFIG_MTD_DEBUG */
+
+#endif /* __KERNEL__ */
+
+#endif /* __MTD_MTD_H__ */
diff --git a/slutils/slutils-0.1.0/sltime/sltime.c b/slutils/slutils-0.1.0/sltime/sltime.c
index e69de29bb2..6129df4467 100644
--- a/slutils/slutils-0.1.0/sltime/sltime.c
+++ b/slutils/slutils-0.1.0/sltime/sltime.c
@@ -0,0 +1,108 @@
+/*
+   sltime utility replacement for Sharp Zaurus SL-C7x0/860
+   version 1.0
+   Copyright 2004 Alexander Chukov <sash@cacko.biz>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2, or (at your option)
+   any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <time.h>
+#include <string.h>
+
+#define CONFIG_MTD_NAND_LOGICAL_ADDRESS_ACCESS
+#include "mtduser.h"
+
+#define APM_IOC_SETRTC 0x4146
+#define APM_IOC_GETRTC 0x4147
+
+static int open_mtd(void)
+{
+	int fd;
+	mtd_info_t meminfo;
+
+	/* Open the device */
+	if((fd = open("/dev/mtd1", O_RDWR)) == -1) {
+		perror("open flash");
+		exit(1);
+	}
+
+	/* Fill in MTD device capability structure */  
+	if(ioctl(fd, MEMGETINFO, &meminfo) != 0) {
+		perror("MEMGETINFO");
+		close(fd);
+		exit(1);
+	}
+
+	/* Make sure device page sizes are valid */
+	if( !(meminfo.oobsize == 16 && meminfo.oobblock == 512) &&
+		!(meminfo.oobsize == 8 && meminfo.oobblock == 256) ) {
+		printf("Unknown flash (not normal NAND)\n");
+		close(fd);
+		exit(1);
+	}
+
+	return fd;
+}
+
+int main(int argc, char *argv[])
+{
+	int fd, mfd;
+	struct timeval tv;
+	unsigned int setime;
+	struct read_laddr_info_user rinfo = {0x4C004, 4, (unsigned char *) &setime};
+	
+	if (argc < 2) {
+	    mfd = open_mtd();
+	    if (ioctl(mfd, MEMREADLADDR, &rinfo) != 0) {
+		perror("ioctl(MEMREADLADDR)");
+		close(mfd);
+		exit(1);
+	    }
+	    close(mfd);
+	    fd = open("/dev/apm_bios", O_RDWR);
+	    //setime += ioctl(fd, APM_IOC_GETRTC, 0);
+	    ioctl(fd, APM_IOC_SETRTC, &setime);
+	    tv.tv_usec = 0;
+	    tv.tv_sec = setime;
+	    settimeofday(&tv, 0);
+	    close(fd);
+	} else if (strcmp(argv[1], "-clear") == 0) {
+	    fd = open("/dev/apm_bios", O_RDWR);
+	    tv.tv_usec = 0;
+	    tv.tv_sec  = 1075658510;
+	    settimeofday(&tv, 0);
+	    setime = tv.tv_sec;
+	    ioctl(fd, APM_IOC_SETRTC, (void*)&setime);
+	    close(fd);
+	} else if (strcmp(argv[1], "-set") == 0) {
+	    gettimeofday(&tv, 0);
+	    setime = tv.tv_sec;
+	    mfd = open_mtd();
+	    if (ioctl(mfd, MEMWRITELADDR, &rinfo) != 0) {
+		perror("ioctl(MEMWRITELADDR)");
+		close(mfd);
+		exit(1);
+	    }
+	    close(mfd);
+	} else {
+	    fprintf(stderr, "Usage:\n%s [-set|-clear]\n", argv[0]);
+	    exit(1);
+	}
+	return 0;
+}
+
diff --git a/slutils/slutils-0.1.0/sltime/sltime.pro b/slutils/slutils-0.1.0/sltime/sltime.pro
index e69de29bb2..9e12fde398 100644
--- a/slutils/slutils-0.1.0/sltime/sltime.pro
+++ b/slutils/slutils-0.1.0/sltime/sltime.pro
@@ -0,0 +1,6 @@
+CONFIG = console
+TEMPLATE = app
+INCLUDEPATH += .
+
+HEADERS += mtduser.h
+SOURCES += sltime.c