add collie patches for 2.6.31 kernel

moved the at91 from SRC_URI to SRC_URI_append_machine for the other two
machines that use this kernel. Patches conflict otherwise.

18 files changed, 8925 insertions, 2 deletions

diff --git a/recipes/linux/linux-2.6.31/collie/0001-add-locomo_spi-driver.patch b/recipes/linux/linux-2.6.31/collie/0001-add-locomo_spi-driver.patch
new file mode 100644
index 0000000000..61880876e1
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0001-add-locomo_spi-driver.patch
@@ -0,0 +1,1228 @@
+From f9a6c1625c0e415ecb3ae83d158ce1087e647b7c Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Mon, 20 Oct 2008 17:30:32 +0200
+Subject: [PATCH 01/15] add locomo_spi driver
+
+---
+ drivers/spi/Kconfig      |    4 +
+ drivers/spi/Makefile     |    1 +
+ drivers/spi/locomo_spi.c | 1097 ++++++++++++++++++++++++++++++++++++++++++++++
+ drivers/spi/locomo_spi.h |   75 ++++
+ 4 files changed, 1177 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/spi/locomo_spi.c
+ create mode 100644 drivers/spi/locomo_spi.h
+
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 2c733c2..b72756d 100644
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -139,6 +139,10 @@ config SPI_MPC52xx_PSC
+ 	  This enables using the Freescale MPC52xx Programmable Serial
+ 	  Controller in master SPI mode.
+ 
++config SPI_LOCOMO
++	tristate "Locomo SPI master"
++	depends on SPI_MASTER && SHARP_LOCOMO && EXPERIMENTAL
++	
+ config SPI_MPC8xxx
+ 	tristate "Freescale MPC8xxx SPI controller"
+ 	depends on FSL_SOC
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 3de408d..7618f08 100644
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
+ obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
+ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
++obj-$(CONFIG_SPI_LOCOMO)                += locomo_spi.o
+ # 	... add above this line ...
+ 
+ # SPI protocol drivers (device/link on bus)
+diff --git a/drivers/spi/locomo_spi.c b/drivers/spi/locomo_spi.c
+new file mode 100644
+index 0000000..d3a4bd9
+--- /dev/null
++++ b/drivers/spi/locomo_spi.c
+@@ -0,0 +1,1097 @@
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/stat.h>
++#include <linux/delay.h>
++#include <linux/wait.h>
++#include <linux/interrupt.h>
++#include <asm/hardware/locomo.h>
++#include <asm/errno.h>
++#include <linux/mmc/host.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/mmc_spi.h>
++#include <linux/workqueue.h>
++#include <linux/spinlock.h>
++#include <linux/list.h>
++#include "locomo_spi.h"
++static struct locomospi_dev * spidev;
++static struct work_struct transfer_wq;
++int  delay;
++
++char* transtxbuf=(char*)NULL;
++char* transrxbuf=(char*)NULL;
++int transfercount=0, transfersize=0;
++static DECLARE_WAIT_QUEUE_HEAD(transferqueue);
++/* MMC_SPI functions *********************************************************/
++
++static int locomommcspi_init(struct device *dev, irqreturn_t (*isr)(int, void*), void *mmc)
++{
++	int result;
++	result=request_irq(IRQ_LOCOMO_CARDDETECT, isr, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "locomo-spi",  mmc);
++	return result;
++}
++
++static void locomommcspi_exit(struct device *dev, void* mmc)
++{
++	free_irq(IRQ_LOCOMO_CARDDETECT, mmc);
++}
++
++static int locomommcspi_getro(struct device *dev)
++{
++	return locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROT) > 0 ? 1 : 0;
++}
++
++static void locomommcspi_setpower(struct device *dev, unsigned int mask)
++{
++	if(!mask && spidev->card_power)
++		locomospi_power(0);
++	else if( !spidev->card_power )
++		locomospi_power(1);
++
++}
++
++
++static struct mmc_spi_platform_data colliemmc ={
++	.init 		= locomommcspi_init,
++	.exit 		= locomommcspi_exit,
++	.detect_delay 	= 200,
++	.get_ro 	= locomommcspi_getro,
++	.ocr_mask 	= MMC_VDD_32_33 | MMC_VDD_33_34,
++	.setpower	= locomommcspi_setpower,
++	.powerup_msecs  = 200,
++};
++
++/* Utility function **********************************************************/
++
++static void locomospi_power(int on)
++{
++	locomo_gpio_write(spidev->ldev->dev.parent, LOCOMO_GPIO_CARD_POWER, on);
++	spidev->card_power=on;
++	printk(KERN_DEBUG "locomospi: power %d\n",on);
++}
++
++static void locomospi_setclock(unsigned int div, unsigned int clock)
++{
++	u16 r = ioread16(spidev->base+LOCOMO_SPIMD);
++	div &= 0x7;
++	clock &= 0x3;
++	if(clock != spidev->clock_base || div != spidev->clock_div){
++		r &= ~(LOCOMO_SPI_XSEL  | LOCOMO_SPI_CLKSEL | LOCOMO_SPI_XEN);
++		iowrite16(r,spidev->base+LOCOMO_SPIMD);
++		r |=  (div | (clock <<3) | LOCOMO_SPI_XEN);
++		iowrite16(r,spidev->base+LOCOMO_SPIMD);
++		spidev->clock_div = div;
++		spidev->clock_base = clock;
++		udelay(300);
++	}
++
++}
++// returns 1 if card ist present, 0 otherwise
++static int locomospi_carddetect()
++{
++	return (locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1;
++}
++
++static void locomospi_setcs(int high)
++{
++	u16 r;
++	printk(KERN_DEBUG "locomospi: cs %d\n",high);
++	r = ioread16(spidev->base + LOCOMO_SPICT);
++	if(high)
++		r |= LOCOMO_SPI_CS;
++	else
++		r &= ~LOCOMO_SPI_CS;
++	iowrite16(r, spidev->base + LOCOMO_SPICT);
++}
++
++static void locomospi_reg_open()
++{
++	u16 r;
++	spidev->clock_div = DIV_64;
++	spidev->clock_base = CLOCK_18MHZ;
++	locomospi_power(1);
++	msleep(100);
++//	iowrite16( 0xec00 | (CLOCK_18MHZ <<3)|DIV_64, spidev->base+LOCOMO_SPIMD);
++	iowrite16( LOCOMO_SPI_MSB1ST | LOCOMO_SPI_DOSTAT | LOCOMO_SPI_RCPOL | LOCOMO_SPI_TCPOL 
++			|(CLOCK_18MHZ <<3) | DIV_64, spidev->base+LOCOMO_SPIMD);
++//	if(locomospi_carddetect()){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16( r, spidev->base+LOCOMO_SPIMD);
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XEN;
++		iowrite16( r, spidev->base+LOCOMO_SPIMD);
++//	}
++	iowrite16( LOCOMO_SPI_CS, spidev->base+LOCOMO_SPICT);
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r |= (LOCOMO_SPI_CEN | LOCOMO_SPI_RXUEN | LOCOMO_SPI_ALIGNEN);
++	iowrite16( r, spidev->base+LOCOMO_SPICT);
++	udelay(200);
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r &= ~LOCOMO_SPI_CS;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++}
++
++static void locomospi_reg_release()
++{
++	u16 r;
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r &= ~LOCOMO_SPI_CEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	r = ioread16(spidev->base+LOCOMO_SPIMD);
++	r &= ~LOCOMO_SPI_XEN;
++	iowrite16(r, spidev->base+LOCOMO_SPIMD);
++	r = ioread16(spidev->base+LOCOMO_SPIMD);
++	r &= ~LOCOMO_SPI_XON;
++	iowrite16(r, spidev->base+LOCOMO_SPIMD);
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r |= LOCOMO_SPI_XEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	locomospi_power(0);
++}
++#if 0
++static int txrx(const char* txbuffer, char* rxbuffer, int size)
++{
++	u16 r = ioread16(spidev->base+LOCOMO_SPICT);
++	r |= LOCOMO_SPI_ALIGNEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	printk(KERN_DEBUG "locomospi: %d bytes to prozess\n",size);
++	/* initialize global vars for isr */
++	transfercount=0; transfersize=size; 
++	transtxbuf=txbuffer; transrxbuf=rxbuffer;
++
++	/* start transmit and go sleep  isr will wake us*/
++	enable_irq(IRQ_LOCOMO_SPI_TEND);
++	iowrite8(txbuffer[0], spidev->base+LOCOMO_SPITD);
++	wait_event(transferqueue, transfercount >= transfersize);
++	disable_irq(IRQ_LOCOMO_SPI_TEND);
++	transrxbuf=NULL; transtxbuf=NULL;
++	
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r &= ~LOCOMO_SPI_ALIGNEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	int i;
++	for(i=0; i< size; i++)
++		printk(KERN_DEBUG "locomospi: sent: %x  received: %x \n",txbuffer[i], rxbuffer[i]);
++	
++	
++	return size;
++}
++
++
++static int tx(const char* txbuffer, int size)
++{
++	printk(KERN_DEBUG "locomospi: %d bytes to send\n",size);
++	/* initialize global vars for isr */
++	transfercount=0; transfersize=size; 
++	transtxbuf=txbuffer; 
++
++	/* start transmit and go sleep  isr will wake us*/
++	enable_irq(IRQ_LOCOMO_SPI_RFW);
++	iowrite8(txbuffer[0], spidev->base+LOCOMO_SPITD);
++	wait_event(transferqueue, transfercount >= transfersize);
++	disable_irq(IRQ_LOCOMO_SPI_RFW);
++	transtxbuf=NULL;
++	
++	int i;
++	for(i=0; i< size; i++)
++		printk(KERN_DEBUG "locomospi: sent: %x\n",txbuffer[i]);
++	
++	
++	return size;
++}
++
++static int rx(char* rxbuffer, int size)
++{
++	printk(KERN_DEBUG "locomospi: %d bytes to read\n",size);
++	/* initialize global vars for isr */
++	transfercount=0; transfersize=size; 
++	transrxbuf=rxbuffer;
++
++	/* start transmit and go sleep  isr will wake us*/
++	enable_irq(IRQ_LOCOMO_SPI_RFR);
++	rxbuffer[0]=ioread8(spidev->base+LOCOMO_SPIRD);
++	wait_event(transferqueue, transfercount >= transfersize);
++	disable_irq(IRQ_LOCOMO_SPI_RFR);
++	transrxbuf=NULL;
++	
++	int i;
++	for(i=0; i< size; i++)
++		printk(KERN_DEBUG "locomospi: received: %x \n", rxbuffer[i]);
++	
++	
++	return size;
++}
++
++#else
++static int txrx(const char* txbuffer, char* rxbuffer, int size)
++{
++	int i=0,j=0;
++	int wait;
++	u16 r;
++/*	char * txback = kmalloc(size * sizeof(char), GFP_KERNEL);
++	memcpy(txback, txbuffer, size);	
++*/	
++	if(spidev->clock_div == 4)
++		wait = 0x10000;
++	else
++		wait = 8;
++	
++//	printk(KERN_DEBUG "locomospi: txrx %d bytes to prozess\n",size);
++	
++//	r = ioread16(spidev->base+LOCOMO_SPICT);
++//	r |= LOCOMO_SPI_ALIGNEN;
++//	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	//discard first bogus byte
++
++	ioread8(spidev->base+LOCOMO_SPIRD);
++	for(i=0; i<size; i++){
++		for(j=0; j <= wait; j++){
++			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)
++				break;
++		}
++		iowrite8(txbuffer[i], spidev->base+LOCOMO_SPITD);
++		ndelay(delay);
++		
++		for(j=0; j <= wait; j++){
++			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR)
++				break;
++		}
++		rxbuffer[i] = ioread8(spidev->base+LOCOMO_SPIRD);
++		ndelay(delay);
++	}
++//	r = ioread16(spidev->base+LOCOMO_SPICT);
++//	r &= ~LOCOMO_SPI_ALIGNEN;
++//	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	
++/*	for(j=0; j< size; j++)
++		printk(KERN_DEBUG "locomospi: sent: %x  received: %x \n",txback[j], rxbuffer[j]);
++	
++	kfree(txback);	
++*/	return i;
++}
++
++static int tx(const char* buffer, int size)
++{
++	int i=0,j=0;
++	int wait;
++	u16 r;
++	if(spidev->clock_div == 4)
++		wait = 0x10000;
++	else
++		wait = 8;
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r &= ~LOCOMO_SPI_ALIGNEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++
++//	printk(KERN_DEBUG "locomospi: tx %d bytes to transmit\n",size);
++	for(i=0; i<size; i++){
++		for(j=0; j <= wait; j++){
++			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFW)
++				break;
++		}
++		iowrite8(buffer[i], spidev->base+LOCOMO_SPITD);
++		ndelay(delay);
++	}
++
++	for(j=0; j <= wait; j++){
++		if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_TEND)
++			break;
++	}
++	
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r |= LOCOMO_SPI_ALIGNEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	
++//	for(j=0; j< size; j++)
++//		printk(KERN_DEBUG "locomospi: sent: %x \n", buffer[j]);
++//	printk(KERN_DEBUG "locomospi: tx %d bytes transmitted\n",i);
++	return i;
++}
++
++static int rx(char* buffer, int size)
++{
++	int i,j;
++	int wait;
++	u16 r; 	
++	printk(KERN_DEBUG "locomospi: rx %d bytes to receive\n",size);
++	if(spidev->clock_div == 4)
++		wait = 0x10000;
++	else
++		wait = 8;
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r &= ~LOCOMO_SPI_ALIGNEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++
++	for(i=0; i<size; i++){
++
++		for(j=0; j <= wait; j++){
++			if(ioread16(spidev->base+LOCOMO_SPIST) & LOCOMO_SPI_RFR)
++				break;
++		}
++		buffer[i]= ioread8(spidev->base+LOCOMO_SPIRD);
++		ndelay(delay);
++	}
++	
++	r = ioread16(spidev->base+LOCOMO_SPICT);
++	r |= LOCOMO_SPI_ALIGNEN;
++	iowrite16(r, spidev->base+LOCOMO_SPICT);
++	
++	for(j=0; j< size; j++)
++		printk(KERN_DEBUG "locomospi: received: %x \n", buffer[j]);
++	printk(KERN_DEBUG "locomospi: rx %d bytes received\n",i);
++	return i;
++}
++#endif
++/*
++static irqreturn_t locomospi_rwready(int irq, void *dev_id)
++{
++	struct locomospi_dev* dev=(struct locomospi_dev*) dev_id;
++//	dev_dbg(&spidev->sdev->dev, "IRQ: %d\n", irq);
++//	printk(KERN_DEBUG "locomospi: IRQ: %d\n", irq);
++	wake_up_interruptible(&dev->waitqueue);
++	return IRQ_HANDLED;
++}
++*/
++static irqreturn_t locomospi_testisr(int irq, void *dev_id)
++{
++	char *buf="";
++	switch(irq){
++		case IRQ_LOCOMO_SPI_RFR: buf="RFR";
++					 break;
++		case IRQ_LOCOMO_SPI_RFW: buf="RFW";
++					 break;
++		case IRQ_LOCOMO_SPI_REND:buf="REND";
++					 break;
++		case IRQ_LOCOMO_SPI_TEND:buf="TEND";
++					 break;
++		case IRQ_LOCOMO_CARDDETECT:
++					 buf="CARD_DETECT";
++					 break;
++		default:		return IRQ_NONE;
++	}
++	printk(KERN_DEBUG "locomospi: IRQ: %s\n",buf);
++//	dev_dbg(&spidev->sdev->dev, "IRQ: %s\n",buf);
++	return IRQ_HANDLED;
++}
++static irqreturn_t locomospi_txrxisr(int irq, void *dev_id)
++{
++	if(transfercount < transfersize){
++		transrxbuf[transfercount++] = ioread8(spidev->base+LOCOMO_SPIRD);
++		iowrite8(transtxbuf[transfercount], spidev->base+LOCOMO_SPITD); 		
++	}
++	else{
++		/* transfer complete. wake up txrx */
++		wake_up(&transferqueue);
++	}
++	return IRQ_HANDLED;	
++}	
++
++static irqreturn_t locomospi_txisr(int irq, void *dev_id)
++{
++	if(transfercount < transfersize){
++		iowrite8(transtxbuf[transfercount++], spidev->base+LOCOMO_SPITD); 		
++	}
++	else{
++		/* transfer complete. wake up txrx */
++		wake_up(&transferqueue);
++	}
++	return IRQ_HANDLED;	
++}	
++
++static irqreturn_t locomospi_rxisr(int irq, void *dev_id)
++{
++	if(transfercount < transfersize){
++		transrxbuf[transfercount++] = ioread8(spidev->base+LOCOMO_SPIRD);
++	}
++	else{
++		/* transfer complete. wake up txrx */
++		wake_up(&transferqueue);
++	}
++	return IRQ_HANDLED;	
++}	
++
++static void locomospi_clock(unsigned int Hz)
++{
++	u16 r;
++	printk(KERN_DEBUG "locomospi: changing clock to: %d\n", Hz);
++	if(Hz == 0){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r &= ~LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++	}
++	else if(Hz >= 24576000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_1, CLOCK_25MHZ);
++		delay=41;
++	}
++	else if(Hz >= 22579200){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_1, CLOCK_22MHZ);
++		delay=45;
++	}
++	else if(Hz >= 18432000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_1, CLOCK_18MHZ);
++		delay=55;
++	}
++	else if(Hz >= 12288000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_2, CLOCK_25MHZ);
++		delay=82;
++	}
++	else if(Hz >= 11289600){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_2, CLOCK_22MHZ);
++		delay=89;
++	}
++	else if(Hz >= 9216000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_2, CLOCK_18MHZ);
++		delay=110;
++	}
++	else if(Hz >= 6144000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_4, CLOCK_25MHZ);
++		delay=164;
++	}
++	else if(Hz >= 5644800){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_4, CLOCK_22MHZ);
++		delay=178;
++	}
++	else if(Hz >= 4608000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_4, CLOCK_18MHZ);
++		delay=218;
++	}
++	else if(Hz >= 3072000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_8, CLOCK_25MHZ);
++		delay=327;
++	}
++	else if(Hz >= 2822400){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_8, CLOCK_22MHZ);
++		delay=355;
++	}
++	else if(Hz >= 2304000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_8, CLOCK_18MHZ);
++		delay=435;
++	}
++	else if(Hz >= 384000){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_64, CLOCK_25MHZ);
++		delay=2605;
++	}
++	else if(Hz >= 352800){
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_64, CLOCK_22MHZ);
++		delay=2834;
++	}
++	else{ /* set to 288 KHz */
++		r = ioread16(spidev->base+LOCOMO_SPIMD);
++		r |= LOCOMO_SPI_XON;
++		iowrite16(r, spidev->base+LOCOMO_SPIMD);
++		locomospi_setclock(DIV_64, CLOCK_18MHZ);
++		delay=3473;
++	}
++	spidev->clock = Hz;
++}
++
++/* sysfs attributes used for debug *******************************************/
++
++/* SPI registers */
++ssize_t locomospi_showspimd(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIMD));
++}
++
++ssize_t locomospi_storespimd(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIMD);
++	return count;
++}
++static DRIVER_ATTR(spimd, S_IWUSR | S_IRUGO, locomospi_showspimd, locomospi_storespimd);
++
++ssize_t locomospi_showspict(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPICT));
++}
++
++ssize_t locomospi_storespict(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPICT);
++	return count;
++}
++static DRIVER_ATTR(spict, S_IWUSR | S_IRUGO, locomospi_showspict, locomospi_storespict);
++
++ssize_t locomospi_showspist(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIST));
++}
++
++ssize_t locomospi_storespist(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIST);
++	return count;
++}
++static DRIVER_ATTR(spist, S_IWUSR | S_IRUGO, locomospi_showspist, locomospi_storespist);
++
++ssize_t locomospi_showspitd(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPITD));
++}
++
++ssize_t locomospi_storespitd(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITD);
++	return count;
++}
++static DRIVER_ATTR(spitd, S_IWUSR | S_IRUGO, locomospi_showspitd, locomospi_storespitd);
++
++ssize_t locomospi_showspird(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIRD));
++}
++
++ssize_t locomospi_storespird(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRD);
++	return count;
++}
++static DRIVER_ATTR(spird, S_IWUSR | S_IRUGO, locomospi_showspird, locomospi_storespird);
++
++ssize_t locomospi_showspits(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPITS));
++}
++
++ssize_t locomospi_storespits(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPITS);
++	return count;
++}
++static DRIVER_ATTR(spits, S_IWUSR | S_IRUGO, locomospi_showspits, locomospi_storespits);
++
++ssize_t locomospi_showspirs(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%x\n", ioread16(spidev->base+LOCOMO_SPIRS));
++}
++
++ssize_t locomospi_storespirs(struct device_driver *drv, const char *buf, size_t count)
++{
++	iowrite16(simple_strtoul(buf, NULL, 16), spidev->base+LOCOMO_SPIRS);
++	return count;
++}
++static DRIVER_ATTR(spirs, S_IWUSR | S_IRUGO, locomospi_showspirs, locomospi_storespirs);
++
++/* MMC Card status */
++
++ssize_t locomospi_showpower(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "%d\n", spidev->card_power);
++}
++
++ssize_t locomospi_storepower(struct device_driver *drv, const char *buf, size_t count)
++{
++	locomospi_power(simple_strtoul(buf, NULL, 10));
++	return count;
++}
++static DRIVER_ATTR(cardpower, S_IWUSR | S_IRUGO, locomospi_showpower, locomospi_storepower);
++
++ssize_t locomospi_detectcard(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_CARD_DETECT)>0)?0:1);
++}
++static DRIVER_ATTR(carddetect, S_IRUGO, locomospi_detectcard, NULL);
++
++ssize_t locomospi_writeprotect(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "%d\n",(locomo_gpio_read_level(spidev->ldev->dev.parent,LOCOMO_GPIO_WRITE_PROT)>0)?1:0);
++}
++static DRIVER_ATTR(cardwriteprotect, S_IRUGO, locomospi_writeprotect, NULL);
++
++
++ssize_t locomospi_showclock(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "%d\n", spidev->clock);
++}
++
++ssize_t locomospi_storeclock(struct device_driver *drv, const char *buf, size_t count)
++{
++	locomospi_clock(simple_strtoul(buf, NULL, 10));
++	return count;
++}
++static DRIVER_ATTR(clock, S_IWUSR | S_IRUGO, locomospi_showclock, locomospi_storeclock);
++
++/* debug */
++ssize_t locomospi_showdelay(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "%d\n", delay);
++}
++
++ssize_t locomospi_storedelay(struct device_driver *drv, const char *buf, size_t count)
++{
++	delay=simple_strtoul(buf,NULL,10);
++	return count;
++}
++static DRIVER_ATTR(delay, S_IWUSR | S_IRUGO, locomospi_showdelay, locomospi_storedelay);
++
++ssize_t locomospi_reset(struct device_driver *drv, const char *buf, size_t count)
++{
++	int choice = simple_strtoul(buf, NULL, 10);
++	char   buff[100];
++	u16 r; 
++	switch(choice){
++		case 0: locomospi_reg_release();
++			schedule_timeout(2*HZ);
++			locomospi_reg_open();
++			break;
++		case 1: {
++				char b1[] = "\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff";
++				char b2[] = "\xff\x40\x00\x00\x00\x00\x95\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff";
++				locomospi_setcs(1);
++				txrx(b1,b1,17);
++				locomospi_setcs(0);
++				txrx(b2,b2,18);
++
++			}
++			break;
++		case 2: locomospi_setcs(1);
++			txrx("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",buff,18);
++			locomospi_setcs(0);
++			txrx("\xff\x40\x00\x00\x00\x00\x95\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff",buff,17);
++			break;
++		case 3: 
++			r = ioread16(spidev->base+LOCOMO_SPIMD);
++			r |= LOCOMO_SPI_LOOPBACK;
++			iowrite16(r, spidev->base+LOCOMO_SPIMD);
++			txrx("X",buff,1);
++			txrx("abcdefghijklmnopqrstuvwxyz1234567890",buff,36);
++			txrx("Y",buff,1);
++			udelay(100);
++			txrx("Z",buff,1);
++			schedule_timeout(HZ);	
++			txrx("abcdefghijklmnopqrstuvwxyz1234567890",buff,36);
++			
++			r = ioread16(spidev->base+LOCOMO_SPIMD);
++			r &= ~LOCOMO_SPI_LOOPBACK;
++			iowrite16(r, spidev->base+LOCOMO_SPIMD);
++			break;
++		default: /* do nothing */;
++	}
++	return count;
++}
++static DRIVER_ATTR(reset, S_IWUSR, NULL, locomospi_reset);
++
++typedef struct locomo_reg_entry {
++        u32 addr;
++        char* name;
++} locomo_reg_entry_t;
++#define LCM     (sizeof(locomo_regs)/sizeof(locomo_reg_entry_t))
++static locomo_reg_entry_t locomo_regs[] =
++{
++/*      { addr,    name,     description } */
++        { 0x00, "VER" },
++        { 0x04, "ST" },
++        { 0x08, "C32K" },
++        { 0x0C, "ICR" },
++        { 0x10, "MCSX0" },
++        { 0x14, "MCSX1" },
++        { 0x18, "MCSX2" },
++        { 0x1C, "MCSX3" },
++        { 0x20, "ASD" },
++        { 0x28, "HSD" },
++        { 0x2C, "HSC" },
++        { 0x30, "TADC" },
++        { 0x38, "TC" },
++        { 0x3C, "CPSD" },
++        { 0x40, "KIB" },
++        { 0x44, "KSC" },
++        { 0x48, "KCMD" },
++        { 0x4C, "KIC" },
++        { 0x54, "ACC" },
++        { 0x60, "SPIMD" },
++        { 0x64, "SPICT" },
++        { 0x68, "SPIST" },
++        { 0x70, "SPIIS" },
++        { 0x74, "SPIWE" },
++        { 0x78, "SPIIE" },
++        { 0x7C, "SPIIR" },
++        { 0x80, "SPITD" },
++        { 0x84, "SPIRD" },
++        { 0x88, "SPITS" },
++        { 0x8C, "SPIRS" },
++        { 0x90, "GPD" },
++        { 0x94, "GPE" },
++        { 0x98, "GPL" },
++        { 0x9C, "GPO" },
++        { 0xa0, "GRIE" },
++        { 0xa4, "GFIE" },
++        { 0xa8, "GIS" },
++        { 0xac, "GWE" },
++        { 0xb0, "GIE" },
++        { 0xb4, "GIR" },
++        { 0xc8, "ALC" },
++        { 0xcc, "ALR" },
++        { 0xd0, "PAIF" },
++        { 0xd8, "LTC" },
++        { 0xdc, "LTINT" },
++        { 0xe0, "DAC" },
++        { 0xe8, "LPT0" },
++        { 0xec, "LPT1" },
++        { 0xfc, "TCR" },
++};
++
++static ssize_t lcm_show(struct device *dev, struct device_attribute *attr, char *buf)
++{
++	int base = spidev->base - LOCOMO_SPI; 
++	char b[4000]="";
++	char c[30];
++	int i;
++	for(i=0; i<LCM; i++){
++		sprintf(c,"%s:\t\t 0x%x\n",locomo_regs[i].name, ioread16(base + locomo_regs[i].addr));
++		strcat(b,c);
++	}
++	return sprintf(buf,"%s",b);
++}
++
++static DRIVER_ATTR(regs, 0444, lcm_show, NULL);
++
++
++/* SPI functions *************************************************************/
++
++static void locomospi_do_transfer(struct work_struct *wrk)
++{
++	struct list_head *mptr, *tptr, *mptr2;
++	struct spi_transfer *entry;
++	struct spi_message *msg;
++
++	list_for_each_safe(mptr, mptr2, &spidev->message_list){
++		msg = list_entry(mptr, struct spi_message, queue);
++
++		msg->status = 0;
++		msg->actual_length = 0;
++		list_for_each(tptr, &msg->transfers){
++			entry = list_entry(tptr, struct spi_transfer, transfer_list);
++			if(entry->tx_buf && entry->rx_buf){ //duplex
++				txrx((char*) entry->tx_buf, (char*) entry->rx_buf, entry->len);				
++				msg->actual_length += entry->len;
++			} else if(entry->tx_buf && !entry->rx_buf){ //write
++				tx((char*) entry->tx_buf, entry->len);
++				msg->actual_length += entry->len;
++			} else if(!entry->tx_buf && entry->rx_buf){ //read
++				rx((char*) entry->rx_buf, entry->len);
++				msg->actual_length += entry->len;
++			} else if(!entry->tx_buf && !entry->rx_buf){ //error
++				dev_err(&spidev->sdev->dev, "do_transfer: no buffers allocated\n");
++				msg->status = -EFAULT;
++			}
++		}
++		spin_lock(&spidev->message_lock);
++		list_del(mptr);
++		spin_unlock(&spidev->message_lock);
++		msg->complete(msg->context);
++	}
++}
++
++static int locomospi_setup(struct spi_device *spi)
++{
++	if((spi->mode & SPI_CS_HIGH) != (spidev->spimode & SPI_CS_HIGH)) 
++		locomospi_setcs(spi->mode & SPI_CS_HIGH ? 1 : 0 );
++	if(spidev->clock != spi->max_speed_hz){
++		locomospi_clock(spi->max_speed_hz);
++	}
++	spidev->spimode = spi->mode;
++
++	return 0;
++}
++
++static int locomospi_transfer(struct spi_device *spi, struct spi_message *msg)
++{
++
++	spin_lock(&spidev->message_lock);
++	list_add_tail(&msg->queue, &spidev->message_list);
++	spin_unlock(&spidev->message_lock);
++	schedule_work(&transfer_wq);
++	return 0;
++}
++
++static struct locomo_driver locomo_spi_driver = {
++	.drv = {
++		.name = "locomo-spi",
++	},
++	.devid	= LOCOMO_DEVID_SPI,
++	.probe	= locomospi_probe,
++	.remove	= locomospi_remove,
++#ifdef CONFIG_PM
++	.suspend = locomospi_suspend,
++	.resume = locomospi_resume,
++#endif
++};
++
++static struct spi_board_info board = {
++	.modalias 	= "mmc_spi",
++	.platform_data 	= (void*) &colliemmc,
++	.controller_data= NULL,
++	.irq		= 0,
++	.max_speed_hz	= 25000000,
++	.bus_num	= 0,
++	.chip_select	= 0,
++	.mode		= 0,
++};
++
++#ifdef CONFIG_PM
++static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state)
++{
++	disable_irq(IRQ_LOCOMO_CARDDETECT);
++	return 0;
++}
++
++static int locomospi_resume(struct locomo_dev *dev)
++{
++	enable_irq(IRQ_LOCOMO_CARDDETECT);
++	return 0;
++}
++#endif
++
++static int locomospi_probe(struct locomo_dev *dev)
++{
++	int result=0;
++	printk(KERN_DEBUG "Collie MMC over SPI Driver\n");
++	spidev=kmalloc(sizeof(struct locomospi_dev),GFP_KERNEL);
++	if(!spidev){
++		return -ENOMEM;
++	}
++	spidev->ldev = dev;
++	spidev->card_power = 1;
++	spidev->spimode = 0;
++
++	if(!request_mem_region((unsigned long) dev->mapbase, dev->length, LOCOMO_DRIVER_NAME(dev))) {
++		dev_err(&dev->dev, " Can't aquire access to io memory\n");
++		return -EBUSY;
++	}
++	spidev->base=(unsigned long) dev->mapbase;
++	locomospi_reg_open();
++
++	locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_POWER, 0);
++	locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_CARD_DETECT, 1);
++	locomo_gpio_set_dir(dev->dev.parent, LOCOMO_GPIO_WRITE_PROT, 1);
++
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardpower);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_carddetect);
++	if(result){
++		dev_err(&dev->dev,"error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_cardwriteprotect);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spimd);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spict);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spist);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spitd);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spird);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spits);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_spirs);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_clock);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_delay);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_reset);
++	if(result){
++		dev_err(&dev->dev, "error creating driver attribute\n");
++		goto region;
++	}
++	result=driver_create_file(&locomo_spi_driver.drv, &driver_attr_regs);
++        if(result){
++                dev_err(&dev->dev, "error creating driver attribute\n");
++                goto region;
++        }
++	INIT_WORK(&transfer_wq, locomospi_do_transfer);
++	INIT_LIST_HEAD(&spidev->message_list);
++	spin_lock_init(&spidev->message_lock);
++	init_waitqueue_head(&spidev->waitqueue);
++	spidev->master=spi_alloc_master(&dev->dev,0);
++	if(!spidev->master){
++		result=-ENOMEM;
++		goto region;
++	}
++	spidev->master->bus_num = 0;
++	spidev->master->num_chipselect = 1;
++	spidev->master->setup = locomospi_setup;
++	spidev->master->transfer = locomospi_transfer;
++	spidev->sdev = spi_new_device(spidev->master, &board);
++	if(!spidev->sdev){
++		dev_err(&dev->dev, "failed to register spi device\n");
++		result = -EINVAL;
++		goto master;
++	}
++/*	result=request_irq(IRQ_LOCOMO_SPI_RFR, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
++	if(result) {
++		dev_err(&dev->dev, "Could not get IRQ: RFR\n");
++		goto regdev;
++	}
++	//disable_irq(IRQ_LOCOMO_SPI_RFR);
++*//*	result=request_irq(IRQ_LOCOMO_SPI_RFW, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
++	if(result) {
++		dev_err(&dev->dev, "Could not get IRQ: RFW\n");
++		goto irq1;
++	}
++	//disable_irq(IRQ_LOCOMO_SPI_RFW);
++*//*	result=request_irq(IRQ_LOCOMO_SPI_REND, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
++	if(result) {
++		dev_err(&dev->dev, "Could not get IRQ: REND\n");
++		goto irq2;
++	}
++*//*	result=request_irq(IRQ_LOCOMO_SPI_TEND, locomospi_testisr, IRQF_SHARED, "locomo-spi", (void*) spidev);
++	if(result) {
++		dev_err(&dev->dev, "Could not get IRQ: TEND\n");
++		goto irq3;
++	}
++	//disable_irq(IRQ_LOCOMO_SPI_TEND);	
++*/	spidev->workqueue = create_singlethread_workqueue("locomo-spi");
++	if(!spidev->workqueue){
++		dev_err(&dev->dev, "failed to create workqueue\n");
++		goto irq4;
++	}
++	result=spi_register_master(spidev->master);
++	if(result){
++		dev_err(&dev->dev, "failed to register spimaster\n");
++		goto wq;
++	}
++	return 0;
++wq:
++	destroy_workqueue(spidev->workqueue);
++irq4:
++//	free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev);
++irq3:
++//	free_irq(IRQ_LOCOMO_SPI_REND, (void*) spidev);
++irq2:
++//	free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev);
++irq1:
++//	free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev);
++regdev:
++	spi_unregister_device(spidev->sdev);
++master:
++	spi_master_put(spidev->master);
++region:
++	release_mem_region((unsigned long) dev->mapbase, dev->length);
++	kfree(spidev);
++	return result;
++
++}
++
++static int locomospi_remove(struct locomo_dev *dev)
++{
++	spi_unregister_device(spidev->sdev);
++	spi_unregister_master(spidev->master);
++	destroy_workqueue(spidev->workqueue);
++	locomospi_reg_release();
++//	free_irq(IRQ_LOCOMO_SPI_TEND, (void*) spidev);
++//	free_irq(IRQ_LOCOMO_SPI_REND, (void*) spidev);
++//	free_irq(IRQ_LOCOMO_SPI_RFW, (void*) spidev);
++//	free_irq(IRQ_LOCOMO_SPI_RFR, (void*) spidev);
++	spi_master_put(spidev->master);
++	release_mem_region((unsigned long) dev->mapbase, dev->length);
++	kfree(spidev);
++	return 0;
++}
++
++
++
++static int __init locomospi_init(void)
++{
++	int ret = locomo_driver_register(&locomo_spi_driver);
++	if (ret)
++		return ret;
++
++
++	return 0;
++}
++
++static void __exit locomospi_exit(void)
++{
++	locomo_driver_unregister(&locomo_spi_driver);
++}
++
++module_init(locomospi_init);
++module_exit(locomospi_exit);
++
++MODULE_AUTHOR("Thomas Kunze thommy@tabao.de");
++MODULE_DESCRIPTION("Collie mmc driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/spi/locomo_spi.h b/drivers/spi/locomo_spi.h
+new file mode 100644
+index 0000000..7e1c0ce
+--- /dev/null
++++ b/drivers/spi/locomo_spi.h
+@@ -0,0 +1,75 @@
++#include <asm/hardware/locomo.h>
++#ifndef __LOCOMO_SPI_H__
++#define __LOCOMO_SPI_H__
++
++/* locomo-spi status register LOCOMO_SPIST */
++#define LOCOMO_SPI_TEND (1 << 3)        /* Transfer end bit */
++#define LOCOMO_SPI_REND (1 << 2)        /* Receive end bit */
++#define LOCOMO_SPI_RFW  (1 << 1)        /* write buffer bit */
++#define LOCOMO_SPI_RFR  (1)             /* read buffer bit */
++
++/* locomo-spi mode register LOCOMO_SPIMD */
++#define LOCOMO_SPI_LOOPBACK (1 << 15)	/* loopback tx to rx 	*/
++#define LOCOMO_SPI_MSB1ST   (1 << 14)	/* send MSB first 	*/
++#define LOCOMO_SPI_DOSTAT   (1 << 13)	/* transmit line is idle high */
++#define LOCOMO_SPI_TCPOL    (1 << 11) 	/* transmit CPOL (maybe affects CPHA too) */
++#define LOCOMO_SPI_RCPOL    (1 << 10)	/* receive CPOL (maybe affects CPHA too) */
++#define	LOCOMO_SPI_TDINV    (1 << 9)	/* invert transmit line */
++#define LOCOMO_SPI_RDINV    (1 << 8)	/* invert receive line */
++#define LOCOMO_SPI_XON	    (1 << 7)	/* enable spi controller clock */
++#define LOCOMO_SPI_XEN	    (1 << 6)	/* clock bit write enable xon must be off, wait 300 us before xon->1 */ 
++#define LOCOMO_SPI_XSEL	    0x0018 	/* clock select 		*/
++#define CLOCK_18MHZ	    0		/* 18,432 MHz clock 	*/
++#define CLOCK_22MHZ	    1		/* 22,5792 MHz clock	*/
++#define CLOCK_25MHZ	    2		/* 24,576 MHz clock	*/
++#define LOCOMO_SPI_CLKSEL   0x7	
++#define DIV_1		    0		/* don't divide clock   */
++#define DIV_2		    1		/* divide clock by two	*/
++#define DIV_4		    2		/* divide clock by four */
++#define DIV_8		    3		/* divide clock by eight*/
++#define DIV_64		    4		/* divide clock by 64 */
++
++/* locomo-spi control register LOCOMO_SPICT */
++#define LOCOMO_SPI_CRC16_7_B 	(1 << 15) 	/* 0: crc16 1: crc7 */
++#define LOCOMO_SPI_CRCRX_TX_B	(1 << 14)
++#define LOCOMO_SPI_CRCRESET_B	(1 << 13)
++#define LOCOMO_SPI_CEN		(1 << 7)	/* ?? enable */
++#define LOCOMO_SPI_CS		(1 << 6)	/* chip select */
++#define LOCOMO_SPI_UNIT16	(1 << 5) 	/* 0: 8 bit units, 1: 16 bit unit */
++#define LOCOMO_SPI_ALIGNEN	(1 << 2)	/* align transfer enable */
++#define LOCOMO_SPI_RXWEN	(1 << 1)	/* continous receive */
++#define LOCOMO_SPI_RXUEN	(1 << 0)	/* aligned receive */
++
++#define IRQ_LOCOMO_CARDDETECT	IRQ_LOCOMO_GPIO13
++
++
++struct locomospi_dev {
++	struct locomo_dev *ldev;
++	struct spi_master *master;
++	struct spi_device *sdev;
++	int card_power;
++	int clock_base;
++	int clock_div;
++	int clock;
++	unsigned long base;
++	u8 spimode;
++	wait_queue_head_t waitqueue;
++	struct workqueue_struct *workqueue;
++	struct list_head message_list;
++	spinlock_t message_lock;
++};
++
++
++static irqreturn_t 	locomospi_cardisr(int, void*);
++static int 	locomospi_probe(struct locomo_dev*);
++static int 	locomospi_remove(struct locomo_dev*);
++static int 	locomospi_carddetect(void);
++static void 	locomospi_reg_open(void);
++static void	locomospi_reg_release(void);
++static int 	tx(const char*, int);
++static int 	rx(char *, int);
++static void 	locomospi_power(int on);
++static int locomospi_suspend(struct locomo_dev *dev, pm_message_t state);
++static int locomospi_resume(struct locomo_dev *dev);
++static void locomospi_setcs(int high);
++#endif
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0002-collie-fix-scoop-convesion-to-new-api.patch b/recipes/linux/linux-2.6.31/collie/0002-collie-fix-scoop-convesion-to-new-api.patch
new file mode 100644
index 0000000000..43b4afc4c6
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0002-collie-fix-scoop-convesion-to-new-api.patch
@@ -0,0 +1,24 @@
+From 9f36d9ef134f8e5113db06986409dda33170661a Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 28 Oct 2008 21:41:39 +0300
+Subject: [PATCH 02/15] collie: fix scoop convesion to new api
+
+---
+ arch/arm/mach-sa1100/collie.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
+index bbf2ebc..b629cba 100644
+--- a/arch/arm/mach-sa1100/collie.c
++++ b/arch/arm/mach-sa1100/collie.c
+@@ -56,6 +56,7 @@ static struct resource collie_scoop_resources[] = {
+ static struct scoop_config collie_scoop_setup = {
+ 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
+ 	.io_out		= COLLIE_SCOOP_IO_OUT,
++	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
+ };
+ 
+ struct platform_device colliescoop_device = {
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0003-collie-prepare-for-gpiolib-use.patch b/recipes/linux/linux-2.6.31/collie/0003-collie-prepare-for-gpiolib-use.patch
new file mode 100644
index 0000000000..e45deb4215
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0003-collie-prepare-for-gpiolib-use.patch
@@ -0,0 +1,104 @@
+From 5feab05c7a53cd784cb85bbc6105fa6ac26d93a7 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Mon, 5 Oct 2009 22:05:38 +0200
+Subject: [PATCH 03/15] collie: prepare for gpiolib use
+
+prefix gpio definitions for direct register access with '_' so we
+can use the other names for gpio_request & co
+---
+ arch/arm/mach-sa1100/collie.c              |   12 ++++---
+ arch/arm/mach-sa1100/include/mach/collie.h |   42 +++++++++++++++++----------
+ 2 files changed, 33 insertions(+), 21 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
+index b629cba..9f5029c 100644
+--- a/arch/arm/mach-sa1100/collie.c
++++ b/arch/arm/mach-sa1100/collie.c
+@@ -249,22 +249,24 @@ static void __init collie_init(void)
+ 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+ 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+ 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+-		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+-		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
++		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
++		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+ 
+ 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+ 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+ 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+ 
+-	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+-		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
++	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
++		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+ 
+-	PGSR = COLLIE_GPIO_nREMOCON_ON;
++	PGSR = _COLLIE_GPIO_nREMOCON_ON;
+ 
+ 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+ 
+ 	PCFR = PCFR_OPDE;
+ 
++	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
++
+ 
+ 	platform_scoop_config = &collie_pcmcia_config;
+ 
+diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
+index 9efb569..8c8fe46 100644
+--- a/arch/arm/mach-sa1100/include/mach/collie.h
++++ b/arch/arm/mach-sa1100/include/mach/collie.h
+@@ -30,24 +30,34 @@
+ 				COLLIE_SCP_LB_VOL_CHG )
+ #define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+ 
+-/* GPIOs for which the generic definition doesn't say much */
++/* GPIOs for gpiolib  */
+ 
+-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
+-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
+-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
+-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
+-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
+-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
+-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
+-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
+-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
+-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
+-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
+-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
+-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
++#define COLLIE_GPIO_ON_KEY		(0)
++#define COLLIE_GPIO_AC_IN		(1)
++#define COLLIE_GPIO_SDIO_INT		(11)
++#define COLLIE_GPIO_CF_IRQ		(14)
++#define COLLIE_GPIO_nREMOCON_INT	(15)
++#define COLLIE_GPIO_UCB1x00_RESET	(16)
++#define COLLIE_GPIO_nMIC_ON		(17)
++#define COLLIE_GPIO_nREMOCON_ON		(18)
++#define COLLIE_GPIO_CO			(20)
++#define COLLIE_GPIO_MCP_CLK		(21)
++#define COLLIE_GPIO_CF_CD		(22)
++#define COLLIE_GPIO_UCB1x00_IRQ		(23)
++#define COLLIE_GPIO_WAKEUP		(24)
++#define COLLIE_GPIO_GA_INT		(25)
++#define COLLIE_GPIO_MAIN_BAT_LOW	(26)
+ 
++/* GPIO definitions for direct register access */
++
++#define _COLLIE_GPIO_ON_KEY		GPIO_GPIO(0)
++#define _COLLIE_GPIO_AC_IN		GPIO_GPIO(1)
++#define _COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO(15)
++#define _COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO(16)
++#define _COLLIE_GPIO_nMIC_ON		GPIO_GPIO(17)
++#define _COLLIE_GPIO_nREMOCON_ON	GPIO_GPIO(18)
++#define _COLLIE_GPIO_CO			GPIO_GPIO(20)
++#define _COLLIE_GPIO_WAKEUP		GPIO_GPIO(24)
+ /* Interrupts */
+ 
+ #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0004-fix-dma-for-SA1100.patch b/recipes/linux/linux-2.6.31/collie/0004-fix-dma-for-SA1100.patch
new file mode 100644
index 0000000000..6dbb856189
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0004-fix-dma-for-SA1100.patch
@@ -0,0 +1,25 @@
+From 4f4df9e1c0c82cfd9133f52089025a8ff363977c Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Mon, 20 Oct 2008 17:39:02 +0200
+Subject: [PATCH 04/23] fix dma for SA1100
+
+---
+ arch/arm/mach-sa1100/dma.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
+index f990a3e..1489d64 100644
+--- a/arch/arm/mach-sa1100/dma.c
++++ b/arch/arm/mach-sa1100/dma.c
+@@ -39,7 +39,7 @@ typedef struct {
+ 
+ static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
+ 
+-static spinlock_t dma_list_lock;
++static  DEFINE_SPINLOCK(dma_list_lock);
+ 
+ 
+ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-2.6.31/collie/0004-move-drivers-mfd-.h-to-include-linux-mfd.patch b/recipes/linux/linux-2.6.31/collie/0004-move-drivers-mfd-.h-to-include-linux-mfd.patch
new file mode 100644
index 0000000000..06702d129c
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0004-move-drivers-mfd-.h-to-include-linux-mfd.patch
@@ -0,0 +1,782 @@
+From 0b7715e9e13c19249fab4069a9243e51daa4edc6 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 10 Feb 2009 14:54:57 +0100
+Subject: [PATCH 04/15] move drivers/mfd/*.h to include/linux/mfd
+
+So drivers like collie_battery driver can use
+those files easier.
+---
+ drivers/mfd/mcp-core.c        |    2 +-
+ drivers/mfd/mcp-sa11x0.c      |    2 +-
+ drivers/mfd/mcp.h             |   66 -----------
+ drivers/mfd/ucb1x00-assabet.c |    2 +-
+ drivers/mfd/ucb1x00-core.c    |    2 +-
+ drivers/mfd/ucb1x00-ts.c      |    2 +-
+ drivers/mfd/ucb1x00.h         |  255 -----------------------------------------
+ include/linux/mfd/mcp.h       |   68 +++++++++++
+ include/linux/mfd/ucb1x00.h   |  255 +++++++++++++++++++++++++++++++++++++++++
+ 9 files changed, 328 insertions(+), 326 deletions(-)
+ delete mode 100644 drivers/mfd/mcp.h
+ delete mode 100644 drivers/mfd/ucb1x00.h
+ create mode 100644 include/linux/mfd/mcp.h
+ create mode 100644 include/linux/mfd/ucb1x00.h
+
+diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c
+index 57271cb..84815f9 100644
+--- a/drivers/mfd/mcp-core.c
++++ b/drivers/mfd/mcp-core.c
+@@ -17,11 +17,11 @@
+ #include <linux/device.h>
+ #include <linux/slab.h>
+ #include <linux/string.h>
++#include <linux/mfd/mcp.h>
+ 
+ #include <mach/dma.h>
+ #include <asm/system.h>
+ 
+-#include "mcp.h"
+ 
+ #define to_mcp(d)		container_of(d, struct mcp, attached_device)
+ #define to_mcp_driver(d)	container_of(d, struct mcp_driver, drv)
+diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
+index 62b32da..2121898 100644
+--- a/drivers/mfd/mcp-sa11x0.c
++++ b/drivers/mfd/mcp-sa11x0.c
+@@ -19,6 +19,7 @@
+ #include <linux/spinlock.h>
+ #include <linux/slab.h>
+ #include <linux/platform_device.h>
++#include <linux/mfd/mcp.h>
+ 
+ #include <mach/dma.h>
+ #include <mach/hardware.h>
+@@ -28,7 +29,6 @@
+ 
+ #include <mach/assabet.h>
+ 
+-#include "mcp.h"
+ 
+ struct mcp_sa11x0 {
+ 	u32	mccr0;
+diff --git a/drivers/mfd/mcp.h b/drivers/mfd/mcp.h
+deleted file mode 100644
+index c093a93..0000000
+--- a/drivers/mfd/mcp.h
++++ /dev/null
+@@ -1,66 +0,0 @@
+-/*
+- *  linux/drivers/mfd/mcp.h
+- *
+- *  Copyright (C) 2001 Russell King, All Rights Reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License.
+- */
+-#ifndef MCP_H
+-#define MCP_H
+-
+-struct mcp_ops;
+-
+-struct mcp {
+-	struct module	*owner;
+-	struct mcp_ops	*ops;
+-	spinlock_t	lock;
+-	int		use_count;
+-	unsigned int	sclk_rate;
+-	unsigned int	rw_timeout;
+-	dma_device_t	dma_audio_rd;
+-	dma_device_t	dma_audio_wr;
+-	dma_device_t	dma_telco_rd;
+-	dma_device_t	dma_telco_wr;
+-	struct device	attached_device;
+-};
+-
+-struct mcp_ops {
+-	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
+-	void		(*set_audio_divisor)(struct mcp *, unsigned int);
+-	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
+-	unsigned int	(*reg_read)(struct mcp *, unsigned int);
+-	void		(*enable)(struct mcp *);
+-	void		(*disable)(struct mcp *);
+-};
+-
+-void mcp_set_telecom_divisor(struct mcp *, unsigned int);
+-void mcp_set_audio_divisor(struct mcp *, unsigned int);
+-void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
+-unsigned int mcp_reg_read(struct mcp *, unsigned int);
+-void mcp_enable(struct mcp *);
+-void mcp_disable(struct mcp *);
+-#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
+-
+-struct mcp *mcp_host_alloc(struct device *, size_t);
+-int mcp_host_register(struct mcp *);
+-void mcp_host_unregister(struct mcp *);
+-
+-struct mcp_driver {
+-	struct device_driver drv;
+-	int (*probe)(struct mcp *);
+-	void (*remove)(struct mcp *);
+-	int (*suspend)(struct mcp *, pm_message_t);
+-	int (*resume)(struct mcp *);
+-};
+-
+-int mcp_driver_register(struct mcp_driver *);
+-void mcp_driver_unregister(struct mcp_driver *);
+-
+-#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
+-#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
+-
+-#define mcp_priv(mcp)		((void *)((mcp)+1))
+-
+-#endif
+diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c
+index 86fed48..cea9da6 100644
+--- a/drivers/mfd/ucb1x00-assabet.c
++++ b/drivers/mfd/ucb1x00-assabet.c
+@@ -14,10 +14,10 @@
+ #include <linux/fs.h>
+ #include <linux/proc_fs.h>
+ #include <linux/device.h>
++#include <linux/mfd/ucb1x00.h>
+ 
+ #include <mach/dma.h>
+ 
+-#include "ucb1x00.h"
+ 
+ #define UCB1X00_ATTR(name,input)\
+ static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \
+diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
+index fea9085..61f3933 100644
+--- a/drivers/mfd/ucb1x00-core.c
++++ b/drivers/mfd/ucb1x00-core.c
+@@ -24,11 +24,11 @@
+ #include <linux/interrupt.h>
+ #include <linux/device.h>
+ #include <linux/mutex.h>
++#include <linux/mfd/ucb1x00.h>
+ 
+ #include <mach/dma.h>
+ #include <mach/hardware.h>
+ 
+-#include "ucb1x00.h"
+ 
+ static DEFINE_MUTEX(ucb1x00_mutex);
+ static LIST_HEAD(ucb1x00_drivers);
+diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
+index 61b7d3e..000cb41 100644
+--- a/drivers/mfd/ucb1x00-ts.c
++++ b/drivers/mfd/ucb1x00-ts.c
+@@ -30,12 +30,12 @@
+ #include <linux/freezer.h>
+ #include <linux/slab.h>
+ #include <linux/kthread.h>
++#include <linux/mfd/ucb1x00.h>
+ 
+ #include <mach/dma.h>
+ #include <mach/collie.h>
+ #include <asm/mach-types.h>
+ 
+-#include "ucb1x00.h"
+ 
+ 
+ struct ucb1x00_ts {
+diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h
+deleted file mode 100644
+index a8ad8a0..0000000
+--- a/drivers/mfd/ucb1x00.h
++++ /dev/null
+@@ -1,255 +0,0 @@
+-/*
+- *  linux/drivers/mfd/ucb1x00.h
+- *
+- *  Copyright (C) 2001 Russell King, All Rights Reserved.
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License as published by
+- * the Free Software Foundation; either version 2 of the License.
+- */
+-#ifndef UCB1200_H
+-#define UCB1200_H
+-
+-#define UCB_IO_DATA	0x00
+-#define UCB_IO_DIR	0x01
+-
+-#define UCB_IO_0		(1 << 0)
+-#define UCB_IO_1		(1 << 1)
+-#define UCB_IO_2		(1 << 2)
+-#define UCB_IO_3		(1 << 3)
+-#define UCB_IO_4		(1 << 4)
+-#define UCB_IO_5		(1 << 5)
+-#define UCB_IO_6		(1 << 6)
+-#define UCB_IO_7		(1 << 7)
+-#define UCB_IO_8		(1 << 8)
+-#define UCB_IO_9		(1 << 9)
+-
+-#define UCB_IE_RIS	0x02
+-#define UCB_IE_FAL	0x03
+-#define UCB_IE_STATUS	0x04
+-#define UCB_IE_CLEAR	0x04
+-#define UCB_IE_ADC		(1 << 11)
+-#define UCB_IE_TSPX		(1 << 12)
+-#define UCB_IE_TSMX		(1 << 13)
+-#define UCB_IE_TCLIP		(1 << 14)
+-#define UCB_IE_ACLIP		(1 << 15)
+-
+-#define UCB_IRQ_TSPX		12
+-
+-#define UCB_TC_A	0x05
+-#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
+-#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
+-
+-#define UCB_TC_B	0x06
+-#define UCB_TC_B_VOICE_ENA	(1 << 3)
+-#define UCB_TC_B_CLIP		(1 << 4)
+-#define UCB_TC_B_ATT		(1 << 6)
+-#define UCB_TC_B_SIDE_ENA	(1 << 11)
+-#define UCB_TC_B_MUTE		(1 << 13)
+-#define UCB_TC_B_IN_ENA		(1 << 14)
+-#define UCB_TC_B_OUT_ENA	(1 << 15)
+-
+-#define UCB_AC_A	0x07
+-#define UCB_AC_B	0x08
+-#define UCB_AC_B_LOOP		(1 << 8)
+-#define UCB_AC_B_MUTE		(1 << 13)
+-#define UCB_AC_B_IN_ENA		(1 << 14)
+-#define UCB_AC_B_OUT_ENA	(1 << 15)
+-
+-#define UCB_TS_CR	0x09
+-#define UCB_TS_CR_TSMX_POW	(1 << 0)
+-#define UCB_TS_CR_TSPX_POW	(1 << 1)
+-#define UCB_TS_CR_TSMY_POW	(1 << 2)
+-#define UCB_TS_CR_TSPY_POW	(1 << 3)
+-#define UCB_TS_CR_TSMX_GND	(1 << 4)
+-#define UCB_TS_CR_TSPX_GND	(1 << 5)
+-#define UCB_TS_CR_TSMY_GND	(1 << 6)
+-#define UCB_TS_CR_TSPY_GND	(1 << 7)
+-#define UCB_TS_CR_MODE_INT	(0 << 8)
+-#define UCB_TS_CR_MODE_PRES	(1 << 8)
+-#define UCB_TS_CR_MODE_POS	(2 << 8)
+-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
+-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
+-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
+-
+-#define UCB_ADC_CR	0x0a
+-#define UCB_ADC_SYNC_ENA	(1 << 0)
+-#define UCB_ADC_VREFBYP_CON	(1 << 1)
+-#define UCB_ADC_INP_TSPX	(0 << 2)
+-#define UCB_ADC_INP_TSMX	(1 << 2)
+-#define UCB_ADC_INP_TSPY	(2 << 2)
+-#define UCB_ADC_INP_TSMY	(3 << 2)
+-#define UCB_ADC_INP_AD0		(4 << 2)
+-#define UCB_ADC_INP_AD1		(5 << 2)
+-#define UCB_ADC_INP_AD2		(6 << 2)
+-#define UCB_ADC_INP_AD3		(7 << 2)
+-#define UCB_ADC_EXT_REF		(1 << 5)
+-#define UCB_ADC_START		(1 << 7)
+-#define UCB_ADC_ENA		(1 << 15)
+-
+-#define UCB_ADC_DATA	0x0b
+-#define UCB_ADC_DAT_VAL		(1 << 15)
+-#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
+-
+-#define UCB_ID		0x0c
+-#define UCB_ID_1200		0x1004
+-#define UCB_ID_1300		0x1005
+-#define UCB_ID_TC35143          0x9712
+-
+-#define UCB_MODE	0x0d
+-#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
+-#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
+-
+-#include "mcp.h"
+-
+-struct ucb1x00_irq {
+-	void *devid;
+-	void (*fn)(int, void *);
+-};
+-
+-struct ucb1x00 {
+-	spinlock_t		lock;
+-	struct mcp		*mcp;
+-	unsigned int		irq;
+-	struct semaphore	adc_sem;
+-	spinlock_t		io_lock;
+-	u16			id;
+-	u16			io_dir;
+-	u16			io_out;
+-	u16			adc_cr;
+-	u16			irq_fal_enbl;
+-	u16			irq_ris_enbl;
+-	struct ucb1x00_irq	irq_handler[16];
+-	struct device		dev;
+-	struct list_head	node;
+-	struct list_head	devs;
+-};
+-
+-struct ucb1x00_driver;
+-
+-struct ucb1x00_dev {
+-	struct list_head	dev_node;
+-	struct list_head	drv_node;
+-	struct ucb1x00		*ucb;
+-	struct ucb1x00_driver	*drv;
+-	void			*priv;
+-};
+-
+-struct ucb1x00_driver {
+-	struct list_head	node;
+-	struct list_head	devs;
+-	int	(*add)(struct ucb1x00_dev *dev);
+-	void	(*remove)(struct ucb1x00_dev *dev);
+-	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
+-	int	(*resume)(struct ucb1x00_dev *dev);
+-};
+-
+-#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
+-
+-int ucb1x00_register_driver(struct ucb1x00_driver *);
+-void ucb1x00_unregister_driver(struct ucb1x00_driver *);
+-
+-/**
+- *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
+- *	@ucb: UCB1x00 structure describing chip
+- *
+- *	Return the SIB clock rate in Hz.
+- */
+-static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
+-{
+-	return mcp_get_sclk_rate(ucb->mcp);
+-}
+-
+-/**
+- *	ucb1x00_enable - enable the UCB1x00 SIB clock
+- *	@ucb: UCB1x00 structure describing chip
+- *
+- *	Enable the SIB clock.  This can be called multiple times.
+- */
+-static inline void ucb1x00_enable(struct ucb1x00 *ucb)
+-{
+-	mcp_enable(ucb->mcp);
+-}
+-
+-/**
+- *	ucb1x00_disable - disable the UCB1x00 SIB clock
+- *	@ucb: UCB1x00 structure describing chip
+- *
+- *	Disable the SIB clock.  The SIB clock will only be disabled
+- *	when the number of ucb1x00_enable calls match the number of
+- *	ucb1x00_disable calls.
+- */
+-static inline void ucb1x00_disable(struct ucb1x00 *ucb)
+-{
+-	mcp_disable(ucb->mcp);
+-}
+-
+-/**
+- *	ucb1x00_reg_write - write a UCB1x00 register
+- *	@ucb: UCB1x00 structure describing chip
+- *	@reg: UCB1x00 4-bit register index to write
+- *	@val: UCB1x00 16-bit value to write
+- *
+- *	Write the UCB1x00 register @reg with value @val.  The SIB
+- *	clock must be running for this function to return.
+- */
+-static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
+-{
+-	mcp_reg_write(ucb->mcp, reg, val);
+-}
+-
+-/**
+- *	ucb1x00_reg_read - read a UCB1x00 register
+- *	@ucb: UCB1x00 structure describing chip
+- *	@reg: UCB1x00 4-bit register index to write
+- *
+- *	Read the UCB1x00 register @reg and return its value.  The SIB
+- *	clock must be running for this function to return.
+- */
+-static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
+-{
+-	return mcp_reg_read(ucb->mcp, reg);
+-}
+-/**
+- *	ucb1x00_set_audio_divisor - 
+- *	@ucb: UCB1x00 structure describing chip
+- *	@div: SIB clock divisor
+- */
+-static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
+-{
+-	mcp_set_audio_divisor(ucb->mcp, div);
+-}
+-
+-/**
+- *	ucb1x00_set_telecom_divisor -
+- *	@ucb: UCB1x00 structure describing chip
+- *	@div: SIB clock divisor
+- */
+-static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
+-{
+-	mcp_set_telecom_divisor(ucb->mcp, div);
+-}
+-
+-void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
+-void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
+-unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
+-
+-#define UCB_NOSYNC	(0)
+-#define UCB_SYNC	(1)
+-
+-unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
+-void ucb1x00_adc_enable(struct ucb1x00 *ucb);
+-void ucb1x00_adc_disable(struct ucb1x00 *ucb);
+-
+-/*
+- * Which edges of the IRQ do you want to control today?
+- */
+-#define UCB_RISING	(1 << 0)
+-#define UCB_FALLING	(1 << 1)
+-
+-int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
+-void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
+-void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
+-int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
+-
+-#endif
+diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
+new file mode 100644
+index 0000000..be95e09
+--- /dev/null
++++ b/include/linux/mfd/mcp.h
+@@ -0,0 +1,68 @@
++/*
++ *  linux/drivers/mfd/mcp.h
++ *
++ *  Copyright (C) 2001 Russell King, All Rights Reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++ */
++#ifndef MCP_H
++#define MCP_H
++
++#include <mach/dma.h>
++
++struct mcp_ops;
++
++struct mcp {
++	struct module	*owner;
++	struct mcp_ops	*ops;
++	spinlock_t	lock;
++	int		use_count;
++	unsigned int	sclk_rate;
++	unsigned int	rw_timeout;
++	dma_device_t	dma_audio_rd;
++	dma_device_t	dma_audio_wr;
++	dma_device_t	dma_telco_rd;
++	dma_device_t	dma_telco_wr;
++	struct device	attached_device;
++};
++
++struct mcp_ops {
++	void		(*set_telecom_divisor)(struct mcp *, unsigned int);
++	void		(*set_audio_divisor)(struct mcp *, unsigned int);
++	void		(*reg_write)(struct mcp *, unsigned int, unsigned int);
++	unsigned int	(*reg_read)(struct mcp *, unsigned int);
++	void		(*enable)(struct mcp *);
++	void		(*disable)(struct mcp *);
++};
++
++void mcp_set_telecom_divisor(struct mcp *, unsigned int);
++void mcp_set_audio_divisor(struct mcp *, unsigned int);
++void mcp_reg_write(struct mcp *, unsigned int, unsigned int);
++unsigned int mcp_reg_read(struct mcp *, unsigned int);
++void mcp_enable(struct mcp *);
++void mcp_disable(struct mcp *);
++#define mcp_get_sclk_rate(mcp)	((mcp)->sclk_rate)
++
++struct mcp *mcp_host_alloc(struct device *, size_t);
++int mcp_host_register(struct mcp *);
++void mcp_host_unregister(struct mcp *);
++
++struct mcp_driver {
++	struct device_driver drv;
++	int (*probe)(struct mcp *);
++	void (*remove)(struct mcp *);
++	int (*suspend)(struct mcp *, pm_message_t);
++	int (*resume)(struct mcp *);
++};
++
++int mcp_driver_register(struct mcp_driver *);
++void mcp_driver_unregister(struct mcp_driver *);
++
++#define mcp_get_drvdata(mcp)	dev_get_drvdata(&(mcp)->attached_device)
++#define mcp_set_drvdata(mcp,d)	dev_set_drvdata(&(mcp)->attached_device, d)
++
++#define mcp_priv(mcp)		((void *)((mcp)+1))
++
++#endif
+diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
+new file mode 100644
+index 0000000..eac3463
+--- /dev/null
++++ b/include/linux/mfd/ucb1x00.h
+@@ -0,0 +1,255 @@
++/*
++ *  linux/include/mfd/ucb1x00.h
++ *
++ *  Copyright (C) 2001 Russell King, All Rights Reserved.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License.
++ */
++#ifndef UCB1200_H
++#define UCB1200_H
++
++#include <linux/mfd/mcp.h>
++#define UCB_IO_DATA	0x00
++#define UCB_IO_DIR	0x01
++
++#define UCB_IO_0		(1 << 0)
++#define UCB_IO_1		(1 << 1)
++#define UCB_IO_2		(1 << 2)
++#define UCB_IO_3		(1 << 3)
++#define UCB_IO_4		(1 << 4)
++#define UCB_IO_5		(1 << 5)
++#define UCB_IO_6		(1 << 6)
++#define UCB_IO_7		(1 << 7)
++#define UCB_IO_8		(1 << 8)
++#define UCB_IO_9		(1 << 9)
++
++#define UCB_IE_RIS	0x02
++#define UCB_IE_FAL	0x03
++#define UCB_IE_STATUS	0x04
++#define UCB_IE_CLEAR	0x04
++#define UCB_IE_ADC		(1 << 11)
++#define UCB_IE_TSPX		(1 << 12)
++#define UCB_IE_TSMX		(1 << 13)
++#define UCB_IE_TCLIP		(1 << 14)
++#define UCB_IE_ACLIP		(1 << 15)
++
++#define UCB_IRQ_TSPX		12
++
++#define UCB_TC_A	0x05
++#define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
++#define UCB_TC_A_AMPL		(1 << 7)	/* UCB1300 */
++
++#define UCB_TC_B	0x06
++#define UCB_TC_B_VOICE_ENA	(1 << 3)
++#define UCB_TC_B_CLIP		(1 << 4)
++#define UCB_TC_B_ATT		(1 << 6)
++#define UCB_TC_B_SIDE_ENA	(1 << 11)
++#define UCB_TC_B_MUTE		(1 << 13)
++#define UCB_TC_B_IN_ENA		(1 << 14)
++#define UCB_TC_B_OUT_ENA	(1 << 15)
++
++#define UCB_AC_A	0x07
++#define UCB_AC_B	0x08
++#define UCB_AC_B_LOOP		(1 << 8)
++#define UCB_AC_B_MUTE		(1 << 13)
++#define UCB_AC_B_IN_ENA		(1 << 14)
++#define UCB_AC_B_OUT_ENA	(1 << 15)
++
++#define UCB_TS_CR	0x09
++#define UCB_TS_CR_TSMX_POW	(1 << 0)
++#define UCB_TS_CR_TSPX_POW	(1 << 1)
++#define UCB_TS_CR_TSMY_POW	(1 << 2)
++#define UCB_TS_CR_TSPY_POW	(1 << 3)
++#define UCB_TS_CR_TSMX_GND	(1 << 4)
++#define UCB_TS_CR_TSPX_GND	(1 << 5)
++#define UCB_TS_CR_TSMY_GND	(1 << 6)
++#define UCB_TS_CR_TSPY_GND	(1 << 7)
++#define UCB_TS_CR_MODE_INT	(0 << 8)
++#define UCB_TS_CR_MODE_PRES	(1 << 8)
++#define UCB_TS_CR_MODE_POS	(2 << 8)
++#define UCB_TS_CR_BIAS_ENA	(1 << 11)
++#define UCB_TS_CR_TSPX_LOW	(1 << 12)
++#define UCB_TS_CR_TSMX_LOW	(1 << 13)
++
++#define UCB_ADC_CR	0x0a
++#define UCB_ADC_SYNC_ENA	(1 << 0)
++#define UCB_ADC_VREFBYP_CON	(1 << 1)
++#define UCB_ADC_INP_TSPX	(0 << 2)
++#define UCB_ADC_INP_TSMX	(1 << 2)
++#define UCB_ADC_INP_TSPY	(2 << 2)
++#define UCB_ADC_INP_TSMY	(3 << 2)
++#define UCB_ADC_INP_AD0		(4 << 2)
++#define UCB_ADC_INP_AD1		(5 << 2)
++#define UCB_ADC_INP_AD2		(6 << 2)
++#define UCB_ADC_INP_AD3		(7 << 2)
++#define UCB_ADC_EXT_REF		(1 << 5)
++#define UCB_ADC_START		(1 << 7)
++#define UCB_ADC_ENA		(1 << 15)
++
++#define UCB_ADC_DATA	0x0b
++#define UCB_ADC_DAT_VAL		(1 << 15)
++#define UCB_ADC_DAT(x)		(((x) & 0x7fe0) >> 5)
++
++#define UCB_ID		0x0c
++#define UCB_ID_1200		0x1004
++#define UCB_ID_1300		0x1005
++#define UCB_ID_TC35143          0x9712
++
++#define UCB_MODE	0x0d
++#define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
++#define UCB_MODE_AUD_OFF_CAN	(1 << 13)
++
++
++struct ucb1x00_irq {
++	void *devid;
++	void (*fn)(int, void *);
++};
++
++struct ucb1x00 {
++	spinlock_t		lock;
++	struct mcp		*mcp;
++	unsigned int		irq;
++	struct semaphore	adc_sem;
++	spinlock_t		io_lock;
++	u16			id;
++	u16			io_dir;
++	u16			io_out;
++	u16			adc_cr;
++	u16			irq_fal_enbl;
++	u16			irq_ris_enbl;
++	struct ucb1x00_irq	irq_handler[16];
++	struct device		dev;
++	struct list_head	node;
++	struct list_head	devs;
++};
++
++struct ucb1x00_driver;
++
++struct ucb1x00_dev {
++	struct list_head	dev_node;
++	struct list_head	drv_node;
++	struct ucb1x00		*ucb;
++	struct ucb1x00_driver	*drv;
++	void			*priv;
++};
++
++struct ucb1x00_driver {
++	struct list_head	node;
++	struct list_head	devs;
++	int	(*add)(struct ucb1x00_dev *dev);
++	void	(*remove)(struct ucb1x00_dev *dev);
++	int	(*suspend)(struct ucb1x00_dev *dev, pm_message_t state);
++	int	(*resume)(struct ucb1x00_dev *dev);
++};
++
++#define classdev_to_ucb1x00(cd)	container_of(cd, struct ucb1x00, dev)
++
++int ucb1x00_register_driver(struct ucb1x00_driver *);
++void ucb1x00_unregister_driver(struct ucb1x00_driver *);
++
++/**
++ *	ucb1x00_clkrate - return the UCB1x00 SIB clock rate
++ *	@ucb: UCB1x00 structure describing chip
++ *
++ *	Return the SIB clock rate in Hz.
++ */
++static inline unsigned int ucb1x00_clkrate(struct ucb1x00 *ucb)
++{
++	return mcp_get_sclk_rate(ucb->mcp);
++}
++
++/**
++ *	ucb1x00_enable - enable the UCB1x00 SIB clock
++ *	@ucb: UCB1x00 structure describing chip
++ *
++ *	Enable the SIB clock.  This can be called multiple times.
++ */
++static inline void ucb1x00_enable(struct ucb1x00 *ucb)
++{
++	mcp_enable(ucb->mcp);
++}
++
++/**
++ *	ucb1x00_disable - disable the UCB1x00 SIB clock
++ *	@ucb: UCB1x00 structure describing chip
++ *
++ *	Disable the SIB clock.  The SIB clock will only be disabled
++ *	when the number of ucb1x00_enable calls match the number of
++ *	ucb1x00_disable calls.
++ */
++static inline void ucb1x00_disable(struct ucb1x00 *ucb)
++{
++	mcp_disable(ucb->mcp);
++}
++
++/**
++ *	ucb1x00_reg_write - write a UCB1x00 register
++ *	@ucb: UCB1x00 structure describing chip
++ *	@reg: UCB1x00 4-bit register index to write
++ *	@val: UCB1x00 16-bit value to write
++ *
++ *	Write the UCB1x00 register @reg with value @val.  The SIB
++ *	clock must be running for this function to return.
++ */
++static inline void ucb1x00_reg_write(struct ucb1x00 *ucb, unsigned int reg, unsigned int val)
++{
++	mcp_reg_write(ucb->mcp, reg, val);
++}
++
++/**
++ *	ucb1x00_reg_read - read a UCB1x00 register
++ *	@ucb: UCB1x00 structure describing chip
++ *	@reg: UCB1x00 4-bit register index to write
++ *
++ *	Read the UCB1x00 register @reg and return its value.  The SIB
++ *	clock must be running for this function to return.
++ */
++static inline unsigned int ucb1x00_reg_read(struct ucb1x00 *ucb, unsigned int reg)
++{
++	return mcp_reg_read(ucb->mcp, reg);
++}
++/**
++ *	ucb1x00_set_audio_divisor - 
++ *	@ucb: UCB1x00 structure describing chip
++ *	@div: SIB clock divisor
++ */
++static inline void ucb1x00_set_audio_divisor(struct ucb1x00 *ucb, unsigned int div)
++{
++	mcp_set_audio_divisor(ucb->mcp, div);
++}
++
++/**
++ *	ucb1x00_set_telecom_divisor -
++ *	@ucb: UCB1x00 structure describing chip
++ *	@div: SIB clock divisor
++ */
++static inline void ucb1x00_set_telecom_divisor(struct ucb1x00 *ucb, unsigned int div)
++{
++	mcp_set_telecom_divisor(ucb->mcp, div);
++}
++
++void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int, unsigned int);
++void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int, unsigned int);
++unsigned int ucb1x00_io_read(struct ucb1x00 *ucb);
++
++#define UCB_NOSYNC	(0)
++#define UCB_SYNC	(1)
++
++unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync);
++void ucb1x00_adc_enable(struct ucb1x00 *ucb);
++void ucb1x00_adc_disable(struct ucb1x00 *ucb);
++
++/*
++ * Which edges of the IRQ do you want to control today?
++ */
++#define UCB_RISING	(1 << 0)
++#define UCB_FALLING	(1 << 1)
++
++int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid);
++void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
++void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges);
++int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid);
++
++#endif
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0005-collie-locomo-led-change-default-trigger.patch b/recipes/linux/linux-2.6.31/collie/0005-collie-locomo-led-change-default-trigger.patch
new file mode 100644
index 0000000000..171e13a941
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0005-collie-locomo-led-change-default-trigger.patch
@@ -0,0 +1,27 @@
+From ce349d6c14de18f6cbb8dd507d3a8bcb4cf4b8ed Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 10 Feb 2009 13:21:42 +0100
+Subject: [PATCH 05/15] collie: locomo-led change default trigger
+
+Collie uses now the powersupply framework. Change the
+default led-trigger of locomo-led to reflect that.
+---
+ drivers/leds/leds-locomo.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/leds/leds-locomo.c b/drivers/leds/leds-locomo.c
+index 5d91362..1f7c10f 100644
+--- a/drivers/leds/leds-locomo.c
++++ b/drivers/leds/leds-locomo.c
+@@ -44,7 +44,7 @@ static void locomoled_brightness_set1(struct led_classdev *led_cdev,
+ 
+ static struct led_classdev locomo_led0 = {
+ 	.name			= "locomo:amber:charge",
+-	.default_trigger	= "sharpsl-charge",
++	.default_trigger	= "main-battery-charging",
+ 	.brightness_set		= locomoled_brightness_set0,
+ };
+ 
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0006-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch b/recipes/linux/linux-2.6.31/collie/0006-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch
new file mode 100644
index 0000000000..f30d801743
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0006-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch
@@ -0,0 +1,43 @@
+From 35f5efba0365e5029d8cae77f6b2546eea09e4d6 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Mon, 9 Feb 2009 23:14:44 +0100
+Subject: [PATCH 06/15] SA1100: make gpio_to_irq and reverse a macro
+
+The function can't be used for static initialisations so
+convert them to macros.
+---
+ arch/arm/mach-sa1100/include/mach/gpio.h |   19 ++++---------------
+ 1 files changed, 4 insertions(+), 15 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
+index 582a0c9..7befc10 100644
+--- a/arch/arm/mach-sa1100/include/mach/gpio.h
++++ b/arch/arm/mach-sa1100/include/mach/gpio.h
+@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
+ 
+ #define gpio_cansleep	__gpio_cansleep
+ 
+-static inline unsigned gpio_to_irq(unsigned gpio)
+-{
+-	if (gpio < 11)
+-		return IRQ_GPIO0 + gpio;
+-	else
+-		return IRQ_GPIO11 - 11 + gpio;
+-}
+-
+-static inline unsigned irq_to_gpio(unsigned irq)
+-{
+-	if (irq < IRQ_GPIO11_27)
+-		return irq - IRQ_GPIO0;
+-	else
+-		return irq - IRQ_GPIO11 + 11;
+-}
++#define gpio_to_irq(gpio)	((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
++					(IRQ_GPIO11 - 11 + gpio))
++#define irq_to_gpio(irq)	((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
++					(irq - IRQ_GPIO11 + 11))
+ 
+ #endif
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0007-add-gpiolib-support-to-ucb1x00.patch b/recipes/linux/linux-2.6.31/collie/0007-add-gpiolib-support-to-ucb1x00.patch
new file mode 100644
index 0000000000..044cfd5b2b
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0007-add-gpiolib-support-to-ucb1x00.patch
@@ -0,0 +1,242 @@
+From c3c8eb1ae240994a9af99589e247f87dacf0d276 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 10 Feb 2009 14:50:56 +0100
+Subject: [PATCH 07/15] add gpiolib support to ucb1x00
+
+The old access methods to the gpios will be removed when
+all users has been converted. (mainly ucb1x00-ts)
+---
+ arch/arm/mach-sa1100/include/mach/mcp.h |    1 +
+ drivers/mfd/mcp-sa11x0.c                |    1 +
+ drivers/mfd/ucb1x00-core.c              |   87 ++++++++++++++++++++++++++++++-
+ include/linux/mfd/mcp.h                 |    1 +
+ include/linux/mfd/ucb1x00.h             |    3 +
+ 5 files changed, 91 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
+index fb8b09a..ed1a331 100644
+--- a/arch/arm/mach-sa1100/include/mach/mcp.h
++++ b/arch/arm/mach-sa1100/include/mach/mcp.h
+@@ -16,6 +16,7 @@ struct mcp_plat_data {
+ 	u32 mccr0;
+ 	u32 mccr1;
+ 	unsigned int sclk_rate;
++	int gpio_base;
+ };
+ 
+ #endif
+diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c
+index 2121898..2584272 100644
+--- a/drivers/mfd/mcp-sa11x0.c
++++ b/drivers/mfd/mcp-sa11x0.c
+@@ -163,6 +163,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
+ 	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
+ 	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
+ 	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
++	mcp->gpio_base		= data->gpio_base;
+ 
+ 	platform_set_drvdata(pdev, mcp);
+ 
+diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
+index 61f3933..e0d7700 100644
+--- a/drivers/mfd/ucb1x00-core.c
++++ b/drivers/mfd/ucb1x00-core.c
+@@ -25,11 +25,11 @@
+ #include <linux/device.h>
+ #include <linux/mutex.h>
+ #include <linux/mfd/ucb1x00.h>
++#include <linux/gpio.h>
+ 
+ #include <mach/dma.h>
+ #include <mach/hardware.h>
+ 
+-
+ static DEFINE_MUTEX(ucb1x00_mutex);
+ static LIST_HEAD(ucb1x00_drivers);
+ static LIST_HEAD(ucb1x00_devices);
+@@ -107,6 +107,60 @@ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
+ 	return ucb1x00_reg_read(ucb, UCB_IO_DATA);
+ }
+ 
++static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
++{
++	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
++	unsigned long flags;
++
++	spin_lock_irqsave(&ucb->io_lock, flags);
++	if (value)
++		ucb->io_out |= 1 << offset;
++	else
++		ucb->io_out &= ~(1 << offset);
++
++	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
++	spin_unlock_irqrestore(&ucb->io_lock, flags);
++}
++
++static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
++{
++	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
++	return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset);
++}
++
++static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++{
++	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
++	unsigned long flags;
++
++	spin_lock_irqsave(&ucb->io_lock, flags);
++	ucb->io_dir &= ~(1 << offset);
++	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
++	spin_unlock_irqrestore(&ucb->io_lock, flags);
++
++	return 0;
++}
++
++static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
++		, int value)
++{
++	struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio);
++	unsigned long flags;
++
++	spin_lock_irqsave(&ucb->io_lock, flags);
++	ucb->io_dir |= (1 << offset);
++	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
++
++	if (value)
++		ucb->io_out |= 1 << offset;
++	else
++		ucb->io_out &= ~(1 << offset);
++	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
++	spin_unlock_irqrestore(&ucb->io_lock, flags);
++
++	return 0;
++}
++
+ /*
+  * UCB1300 data sheet says we must:
+  *  1. enable ADC	=> 5us (including reference startup time)
+@@ -475,6 +529,7 @@ static int ucb1x00_probe(struct mcp *mcp)
+ 	struct ucb1x00_driver *drv;
+ 	unsigned int id;
+ 	int ret = -ENODEV;
++	int temp;
+ 
+ 	mcp_enable(mcp);
+ 	id = mcp_reg_read(mcp, UCB_ID);
+@@ -507,12 +562,27 @@ static int ucb1x00_probe(struct mcp *mcp)
+ 		goto err_free;
+ 	}
+ 
++	ucb->gpio.base = -1;
++	if (mcp->gpio_base != 0) {
++		ucb->gpio.label = dev_name(&ucb->dev);
++		ucb->gpio.base = mcp->gpio_base;
++		ucb->gpio.ngpio = 10;
++		ucb->gpio.set = ucb1x00_gpio_set;
++		ucb->gpio.get = ucb1x00_gpio_get;
++		ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
++		ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
++		ret = gpiochip_add(&ucb->gpio);
++		if (ret)
++			goto err_free;
++	} else
++		dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
++
+ 	ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING,
+ 			  "UCB1x00", ucb);
+ 	if (ret) {
+ 		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+ 			ucb->irq, ret);
+-		goto err_free;
++		goto err_gpio;
+ 	}
+ 
+ 	mcp_set_drvdata(mcp, ucb);
+@@ -521,6 +591,7 @@ static int ucb1x00_probe(struct mcp *mcp)
+ 	if (ret)
+ 		goto err_irq;
+ 
++
+ 	INIT_LIST_HEAD(&ucb->devs);
+ 	mutex_lock(&ucb1x00_mutex);
+ 	list_add(&ucb->node, &ucb1x00_devices);
+@@ -528,10 +599,14 @@ static int ucb1x00_probe(struct mcp *mcp)
+ 		ucb1x00_add_dev(ucb, drv);
+ 	}
+ 	mutex_unlock(&ucb1x00_mutex);
++
+ 	goto out;
+ 
+  err_irq:
+ 	free_irq(ucb->irq, ucb);
++ err_gpio:
++	if (ucb->gpio.base != -1)
++		temp = gpiochip_remove(&ucb->gpio);
+  err_free:
+ 	kfree(ucb);
+  err_disable:
+@@ -544,6 +619,7 @@ static void ucb1x00_remove(struct mcp *mcp)
+ {
+ 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
+ 	struct list_head *l, *n;
++	int ret;
+ 
+ 	mutex_lock(&ucb1x00_mutex);
+ 	list_del(&ucb->node);
+@@ -553,6 +629,12 @@ static void ucb1x00_remove(struct mcp *mcp)
+ 	}
+ 	mutex_unlock(&ucb1x00_mutex);
+ 
++	if (ucb->gpio.base != -1) {
++		ret = gpiochip_remove(&ucb->gpio);
++		if (ret)
++			dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret);
++	}
++
+ 	free_irq(ucb->irq, ucb);
+ 	device_unregister(&ucb->dev);
+ }
+@@ -603,6 +685,7 @@ static int ucb1x00_resume(struct mcp *mcp)
+ 	struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
+ 	struct ucb1x00_dev *dev;
+ 
++	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ 	mutex_lock(&ucb1x00_mutex);
+ 	list_for_each_entry(dev, &ucb->devs, dev_node) {
+ 		if (dev->drv->resume)
+diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h
+index be95e09..ee49670 100644
+--- a/include/linux/mfd/mcp.h
++++ b/include/linux/mfd/mcp.h
+@@ -26,6 +26,7 @@ struct mcp {
+ 	dma_device_t	dma_telco_rd;
+ 	dma_device_t	dma_telco_wr;
+ 	struct device	attached_device;
++	int		gpio_base;
+ };
+ 
+ struct mcp_ops {
+diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
+index eac3463..aa9c378 100644
+--- a/include/linux/mfd/ucb1x00.h
++++ b/include/linux/mfd/ucb1x00.h
+@@ -11,6 +11,8 @@
+ #define UCB1200_H
+ 
+ #include <linux/mfd/mcp.h>
++#include <linux/gpio.h>
++
+ #define UCB_IO_DATA	0x00
+ #define UCB_IO_DIR	0x01
+ 
+@@ -123,6 +125,7 @@ struct ucb1x00 {
+ 	struct device		dev;
+ 	struct list_head	node;
+ 	struct list_head	devs;
++	struct gpio_chip 	gpio;
+ };
+ 
+ struct ucb1x00_driver;
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0008-collie-convert-to-gpiolib-for-ucb1x00.patch b/recipes/linux/linux-2.6.31/collie/0008-collie-convert-to-gpiolib-for-ucb1x00.patch
new file mode 100644
index 0000000000..45dc471c1a
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0008-collie-convert-to-gpiolib-for-ucb1x00.patch
@@ -0,0 +1,80 @@
+From a93eff611618fd63bb74f4f9c17b9d0e58cd226b Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 10 Feb 2009 14:12:02 +0100
+Subject: [PATCH 08/15] collie: convert to gpiolib for ucb1x00
+
+Only the parts used for collie_battery are converted.
+The rest will be cleaned up later.
+---
+ arch/arm/mach-sa1100/collie.c              |    1 +
+ arch/arm/mach-sa1100/include/mach/collie.h |   35 ++++++++++++++-------------
+ 2 files changed, 19 insertions(+), 17 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
+index 9f5029c..395cf09 100644
+--- a/arch/arm/mach-sa1100/collie.c
++++ b/arch/arm/mach-sa1100/collie.c
+@@ -86,6 +86,7 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
+ static struct mcp_plat_data collie_mcp_data = {
+ 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
+ 	.sclk_rate	= 9216000,
++	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+ };
+ 
+ #ifdef CONFIG_SHARP_LOCOMO
+diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
+index 8c8fe46..71a0b3f 100644
+--- a/arch/arm/mach-sa1100/include/mach/collie.h
++++ b/arch/arm/mach-sa1100/include/mach/collie.h
+@@ -25,10 +25,10 @@
+ #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
+ #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
+ 
+-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
++#define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+ 				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
+-				COLLIE_SCP_LB_VOL_CHG )
+-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
++				COLLIE_SCP_LB_VOL_CHG)
++#define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
+ 
+ /* GPIOs for gpiolib  */
+ 
+@@ -80,19 +80,20 @@
+ #define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
+ 
+ /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
+-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
+-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
+-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
+-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
+-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
+-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
+-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
+-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
+-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
+-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
+-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
++#define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
++#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
++#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
++#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
++#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
++#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
++#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
++#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
++#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
++#define COLLIE_GPIO_MBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 7)
++#define COLLIE_GPIO_BBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 8)
++#define COLLIE_GPIO_TMP_ON      	(COLLIE_TC35143_GPIO_BASE + 9)
++#define COLLIE_TC35143_GPIO_IN		(UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
++#define COLLIE_TC35143_GPIO_OUT		(UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
++						| UCB_IO_6)
+ 
+ #endif
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0009-collie-add-battery-driver.patch b/recipes/linux/linux-2.6.31/collie/0009-collie-add-battery-driver.patch
new file mode 100644
index 0000000000..9f2bdabdad
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0009-collie-add-battery-driver.patch
@@ -0,0 +1,470 @@
+From 1bc564846565218e693f5aef31d7db1228da6845 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 10 Feb 2009 14:12:29 +0100
+Subject: [PATCH 09/15] collie: add battery driver
+
+This driver is based on tosa_battery.c.
+---
+ drivers/power/Kconfig          |    7 +
+ drivers/power/Makefile         |    1 +
+ drivers/power/collie_battery.c |  418 ++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 426 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/power/collie_battery.c
+
+diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
+index bdbc4f7..def79ef 100644
+--- a/drivers/power/Kconfig
++++ b/drivers/power/Kconfig
+@@ -70,6 +70,13 @@ config BATTERY_TOSA
+ 	  Say Y to enable support for the battery on the Sharp Zaurus
+ 	  SL-6000 (tosa) models.
+ 
++config BATTERY_COLLIE
++	tristate "Sharp SL-5500 (collie) battery"
++	depends on SA1100_COLLIE && MCP_UCB1200
++	help
++	  Say Y to enable support for the battery on the Sharp Zaurus
++	  SL-5500 (collie) models.
++
+ config BATTERY_WM97XX
+ 	bool "WM97xx generic battery driver"
+ 	depends on TOUCHSCREEN_WM97XX=y
+diff --git a/drivers/power/Makefile b/drivers/power/Makefile
+index 380d17c..58c13f9 100644
+--- a/drivers/power/Makefile
++++ b/drivers/power/Makefile
+@@ -23,6 +23,7 @@ obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
+ obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
+ obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
+ obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
++obj-$(CONFIG_BATTERY_COLLIE)	+= collie_battery.o
+ obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
+ obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
+ obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
+diff --git a/drivers/power/collie_battery.c b/drivers/power/collie_battery.c
+new file mode 100644
+index 0000000..039f41a
+--- /dev/null
++++ b/drivers/power/collie_battery.c
+@@ -0,0 +1,418 @@
++/*
++ * Battery and Power Management code for the Sharp SL-5x00
++ *
++ * Copyright (C) 2009 Thomas Kunze
++ *
++ * based on tosa_battery.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/power_supply.h>
++#include <linux/delay.h>
++#include <linux/spinlock.h>
++#include <linux/interrupt.h>
++#include <linux/gpio.h>
++#include <linux/mfd/ucb1x00.h>
++
++#include <asm/mach/sharpsl_param.h>
++#include <asm/mach-types.h>
++#include <mach/collie.h>
++
++static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
++static struct work_struct bat_work;
++static struct ucb1x00 *ucb;
++
++struct collie_bat {
++	int status;
++	struct power_supply psy;
++	int full_chrg;
++
++	struct mutex work_lock; /* protects data */
++
++	bool (*is_present)(struct collie_bat *bat);
++	int gpio_full;
++	int gpio_charge_on;
++
++	int technology;
++
++	int gpio_bat;
++	int adc_bat;
++	int adc_bat_divider;
++	int bat_max;
++	int bat_min;
++
++	int gpio_temp;
++	int adc_temp;
++	int adc_temp_divider;
++};
++
++static struct collie_bat collie_bat_main;
++
++static unsigned long collie_read_bat(struct collie_bat *bat)
++{
++	unsigned long value = 0;
++
++	if (bat->gpio_bat < 0 || bat->adc_bat < 0)
++		return 0;
++	mutex_lock(&bat_lock);
++	gpio_set_value(bat->gpio_bat, 1);
++	msleep(5);
++	ucb1x00_adc_enable(ucb);
++	value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
++	ucb1x00_adc_disable(ucb);
++	gpio_set_value(bat->gpio_bat, 0);
++	mutex_unlock(&bat_lock);
++	value = value * 1000000 / bat->adc_bat_divider;
++
++	return value;
++}
++
++static unsigned long collie_read_temp(struct collie_bat *bat)
++{
++	unsigned long value = 0;
++	if (bat->gpio_temp < 0 || bat->adc_temp < 0)
++		return 0;
++
++	mutex_lock(&bat_lock);
++	gpio_set_value(bat->gpio_temp, 1);
++	msleep(5);
++	ucb1x00_adc_enable(ucb);
++	value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
++	ucb1x00_adc_disable(ucb);
++	gpio_set_value(bat->gpio_temp, 0);
++	mutex_unlock(&bat_lock);
++
++	value = value * 10000 / bat->adc_temp_divider;
++
++	return value;
++}
++
++static int collie_bat_get_property(struct power_supply *psy,
++			    enum power_supply_property psp,
++			    union power_supply_propval *val)
++{
++	int ret = 0;
++	struct collie_bat *bat = container_of(psy, struct collie_bat, psy);
++
++	if (bat->is_present && !bat->is_present(bat)
++			&& psp != POWER_SUPPLY_PROP_PRESENT) {
++		return -ENODEV;
++	}
++
++	switch (psp) {
++	case POWER_SUPPLY_PROP_STATUS:
++		val->intval = bat->status;
++		break;
++	case POWER_SUPPLY_PROP_TECHNOLOGY:
++		val->intval = bat->technology;
++		break;
++	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
++		val->intval = collie_read_bat(bat);
++		break;
++	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
++		if (bat->full_chrg == -1)
++			val->intval = bat->bat_max;
++		else
++			val->intval = bat->full_chrg;
++		break;
++	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
++		val->intval = bat->bat_max;
++		break;
++	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
++		val->intval = bat->bat_min;
++		break;
++	case POWER_SUPPLY_PROP_TEMP:
++		val->intval = collie_read_temp(bat);
++		break;
++	case POWER_SUPPLY_PROP_PRESENT:
++		val->intval = bat->is_present ? bat->is_present(bat) : 1;
++		break;
++	default:
++		ret = -EINVAL;
++		break;
++	}
++	return ret;
++}
++
++static void collie_bat_external_power_changed(struct power_supply *psy)
++{
++	schedule_work(&bat_work);
++}
++
++static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
++{
++	pr_info("collie_bat_gpio irq: %d\n", gpio_get_value(irq_to_gpio(irq)));
++	schedule_work(&bat_work);
++	return IRQ_HANDLED;
++}
++
++static void collie_bat_update(struct collie_bat *bat)
++{
++	int old;
++	struct power_supply *psy = &bat->psy;
++
++	mutex_lock(&bat->work_lock);
++
++	old = bat->status;
++
++	if (bat->is_present && !bat->is_present(bat)) {
++		printk(KERN_NOTICE "%s not present\n", psy->name);
++		bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
++		bat->full_chrg = -1;
++	} else if (power_supply_am_i_supplied(psy)) {
++		if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
++			gpio_set_value(bat->gpio_charge_on, 1);
++			mdelay(15);
++		}
++
++		if (gpio_get_value(bat->gpio_full)) {
++			if (old == POWER_SUPPLY_STATUS_CHARGING ||
++					bat->full_chrg == -1)
++				bat->full_chrg = collie_read_bat(bat);
++
++			gpio_set_value(bat->gpio_charge_on, 0);
++			bat->status = POWER_SUPPLY_STATUS_FULL;
++		} else {
++			gpio_set_value(bat->gpio_charge_on, 1);
++			bat->status = POWER_SUPPLY_STATUS_CHARGING;
++		}
++	} else {
++		gpio_set_value(bat->gpio_charge_on, 0);
++		bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
++	}
++
++	if (old != bat->status)
++		power_supply_changed(psy);
++
++	mutex_unlock(&bat->work_lock);
++}
++
++static void collie_bat_work(struct work_struct *work)
++{
++	collie_bat_update(&collie_bat_main);
++}
++
++
++static enum power_supply_property collie_bat_main_props[] = {
++	POWER_SUPPLY_PROP_STATUS,
++	POWER_SUPPLY_PROP_TECHNOLOGY,
++	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
++	POWER_SUPPLY_PROP_VOLTAGE_NOW,
++	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
++	POWER_SUPPLY_PROP_VOLTAGE_MAX,
++	POWER_SUPPLY_PROP_PRESENT,
++	POWER_SUPPLY_PROP_TEMP,
++};
++
++static enum power_supply_property collie_bat_bu_props[] = {
++	POWER_SUPPLY_PROP_STATUS,
++	POWER_SUPPLY_PROP_TECHNOLOGY,
++	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
++	POWER_SUPPLY_PROP_VOLTAGE_NOW,
++	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
++	POWER_SUPPLY_PROP_VOLTAGE_MAX,
++	POWER_SUPPLY_PROP_PRESENT,
++};
++
++static struct collie_bat collie_bat_main = {
++	.status = POWER_SUPPLY_STATUS_DISCHARGING,
++	.full_chrg = -1,
++	.psy = {
++		.name		= "main-battery",
++		.type		= POWER_SUPPLY_TYPE_BATTERY,
++		.properties	= collie_bat_main_props,
++		.num_properties	= ARRAY_SIZE(collie_bat_main_props),
++		.get_property	= collie_bat_get_property,
++		.external_power_changed = collie_bat_external_power_changed,
++		.use_for_apm	= 1,
++	},
++
++	.gpio_full = COLLIE_GPIO_CO,
++	.gpio_charge_on = COLLIE_GPIO_CHARGE_ON,
++
++	.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
++
++	.gpio_bat = COLLIE_GPIO_MBAT_ON,
++	.adc_bat = UCB_ADC_INP_AD1,
++	.adc_bat_divider = 155,
++	.bat_max = 4310000,
++	.bat_min = 1551 * 1000000 / 414,
++
++	.gpio_temp = COLLIE_GPIO_TMP_ON,
++	.adc_temp = UCB_ADC_INP_AD0,
++	.adc_temp_divider = 10000,
++};
++
++static struct collie_bat collie_bat_bu = {
++	.status = POWER_SUPPLY_STATUS_UNKNOWN,
++	.full_chrg = -1,
++
++	.psy = {
++		.name		= "backup-battery",
++		.type		= POWER_SUPPLY_TYPE_BATTERY,
++		.properties	= collie_bat_bu_props,
++		.num_properties	= ARRAY_SIZE(collie_bat_bu_props),
++		.get_property	= collie_bat_get_property,
++		.external_power_changed = collie_bat_external_power_changed,
++	},
++
++	.gpio_full = -1,
++	.gpio_charge_on = -1,
++
++	.technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
++
++	.gpio_bat = COLLIE_GPIO_BBAT_ON,
++	.adc_bat = UCB_ADC_INP_AD1,
++	.adc_bat_divider = 155,
++	.bat_max = 3000000,
++	.bat_min = 1900000,
++
++	.gpio_temp = -1,
++	.adc_temp = -1,
++	.adc_temp_divider = -1,
++};
++
++static struct {
++	int gpio;
++	char *name;
++	bool output;
++	int value;
++} gpios[] = {
++	{ COLLIE_GPIO_CO,		"main battery full",	0, 0 },
++	{ COLLIE_GPIO_MAIN_BAT_LOW,	"main battery low",	0, 0 },
++	{ COLLIE_GPIO_CHARGE_ON,	"main charge on",	1, 0 },
++	{ COLLIE_GPIO_MBAT_ON,		"main battery",		1, 0 },
++	{ COLLIE_GPIO_TMP_ON,		"main battery temp",	1, 0 },
++	{ COLLIE_GPIO_BBAT_ON,		"backup battery",	1, 0 },
++};
++
++#ifdef CONFIG_PM
++static int collie_bat_suspend(struct ucb1x00_dev *dev, pm_message_t state)
++{
++	/* flush all pending status updates */
++	flush_scheduled_work();
++	return 0;
++}
++
++static int collie_bat_resume(struct ucb1x00_dev *dev)
++{
++	/* things may have changed while we were away */
++	schedule_work(&bat_work);
++	return 0;
++}
++#else
++#define collie_bat_suspend NULL
++#define collie_bat_resume NULL
++#endif
++
++static int __devinit collie_bat_probe(struct ucb1x00_dev *dev)
++{
++	int ret;
++	int i;
++
++	if (!machine_is_collie())
++		return -ENODEV;
++
++	ucb = dev->ucb;
++
++	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
++		ret = gpio_request(gpios[i].gpio, gpios[i].name);
++		if (ret) {
++			i--;
++			goto err_gpio;
++		}
++
++		if (gpios[i].output)
++			ret = gpio_direction_output(gpios[i].gpio,
++					gpios[i].value);
++		else
++			ret = gpio_direction_input(gpios[i].gpio);
++
++		if (ret)
++			goto err_gpio;
++	}
++
++	mutex_init(&collie_bat_main.work_lock);
++
++	INIT_WORK(&bat_work, collie_bat_work);
++
++	ret = power_supply_register(&dev->ucb->dev, &collie_bat_main.psy);
++	if (ret)
++		goto err_psy_reg_main;
++	ret = power_supply_register(&dev->ucb->dev, &collie_bat_bu.psy);
++	if (ret)
++		goto err_psy_reg_bu;
++
++	ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO),
++				collie_bat_gpio_isr,
++				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++				"main full", &collie_bat_main);
++	if (!ret) {
++		schedule_work(&bat_work);
++		return 0;
++	}
++	power_supply_unregister(&collie_bat_bu.psy);
++err_psy_reg_bu:
++	power_supply_unregister(&collie_bat_main.psy);
++err_psy_reg_main:
++
++	/* see comment in collie_bat_remove */
++	flush_scheduled_work();
++
++	i--;
++err_gpio:
++	for (; i >= 0; i--)
++		gpio_free(gpios[i].gpio);
++
++	return ret;
++}
++
++static void __devexit collie_bat_remove(struct ucb1x00_dev *dev)
++{
++	int i;
++
++	free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
++
++	power_supply_unregister(&collie_bat_bu.psy);
++	power_supply_unregister(&collie_bat_main.psy);
++
++	/*
++	 * now flush all pending work.
++	 * we won't get any more schedules, since all
++	 * sources (isr and external_power_changed)
++	 * are unregistered now.
++	 */
++	flush_scheduled_work();
++
++	for (i = ARRAY_SIZE(gpios) - 1; i >= 0; i--)
++		gpio_free(gpios[i].gpio);
++}
++
++static struct ucb1x00_driver collie_bat_driver = {
++	.add		= collie_bat_probe,
++	.remove		= __devexit_p(collie_bat_remove),
++	.suspend	= collie_bat_suspend,
++	.resume		= collie_bat_resume,
++};
++
++static int __init collie_bat_init(void)
++{
++	return ucb1x00_register_driver(&collie_bat_driver);
++}
++
++static void __exit collie_bat_exit(void)
++{
++	ucb1x00_unregister_driver(&collie_bat_driver);
++}
++
++module_init(collie_bat_init);
++module_exit(collie_bat_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Thomas Kunze");
++MODULE_DESCRIPTION("Collie battery driver");
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0010-collie-support-pda_power-driver.patch b/recipes/linux/linux-2.6.31/collie/0010-collie-support-pda_power-driver.patch
new file mode 100644
index 0000000000..cc37340de4
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0010-collie-support-pda_power-driver.patch
@@ -0,0 +1,103 @@
+From d1602a7c25ad8abbbcb1e15cfb5f7c59e83ce028 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 10 Feb 2009 13:48:32 +0100
+Subject: [PATCH 10/15] collie: support pda_power driver
+
+This add the pda-power platform device to collie.
+---
+ arch/arm/mach-sa1100/collie.c |   65 +++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 65 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
+index 395cf09..fdab9d9 100644
+--- a/arch/arm/mach-sa1100/collie.c
++++ b/arch/arm/mach-sa1100/collie.c
+@@ -26,6 +26,7 @@
+ #include <linux/mtd/partitions.h>
+ #include <linux/timer.h>
+ #include <linux/gpio.h>
++#include <linux/pda_power.h>
+ 
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+@@ -89,6 +90,69 @@ static struct mcp_plat_data collie_mcp_data = {
+ 	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+ };
+ 
++/*
++ * Collie AC IN
++ */
++static int collie_power_init(struct device *dev)
++{
++	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
++	if (ret)
++		goto err_gpio_req;
++
++	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
++	if (ret)
++		goto err_gpio_in;
++
++	return 0;
++
++err_gpio_in:
++	gpio_free(COLLIE_GPIO_AC_IN);
++err_gpio_req:
++	return ret;
++}
++
++static void collie_power_exit(struct device *dev)
++{
++	gpio_free(COLLIE_GPIO_AC_IN);
++}
++
++static int collie_power_ac_online(void)
++{
++	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
++}
++
++static char *collie_ac_supplied_to[] = {
++	"main-battery",
++	"backup-battery",
++};
++
++static struct pda_power_pdata collie_power_data = {
++	.init			= collie_power_init,
++	.is_ac_online		= collie_power_ac_online,
++	.exit			= collie_power_exit,
++	.supplied_to		= collie_ac_supplied_to,
++	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
++};
++
++static struct resource collie_power_resource[] = {
++	{
++		.name		= "ac",
++		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
++		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
++		.flags		= IORESOURCE_IRQ |
++				  IORESOURCE_IRQ_HIGHEDGE |
++				  IORESOURCE_IRQ_LOWEDGE,
++	},
++};
++
++static struct platform_device collie_power_device = {
++	.name			= "pda-power",
++	.id			= -1,
++	.dev.platform_data	= &collie_power_data,
++	.resource		= collie_power_resource,
++	.num_resources		= ARRAY_SIZE(collie_power_resource),
++};
++
+ #ifdef CONFIG_SHARP_LOCOMO
+ /*
+  * low-level UART features.
+@@ -180,6 +244,7 @@ struct platform_device collie_locomo_device = {
+ static struct platform_device *devices[] __initdata = {
+ 	&collie_locomo_device,
+ 	&colliescoop_device,
++	&collie_power_device,
+ };
+ 
+ static struct mtd_partition collie_partitions[] = {
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0011-fix-collie-keyboard-bug.patch b/recipes/linux/linux-2.6.31/collie/0011-fix-collie-keyboard-bug.patch
new file mode 100644
index 0000000000..283314c383
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0011-fix-collie-keyboard-bug.patch
@@ -0,0 +1,24 @@
+From cd73a608d2af290824e6bd0690777a8115467da0 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Mon, 20 Oct 2008 17:40:32 +0200
+Subject: [PATCH 11/15] fix collie keyboard bug
+
+---
+ drivers/input/keyboard/locomokbd.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/input/keyboard/locomokbd.c b/drivers/input/keyboard/locomokbd.c
+index 9caed30..79e19bf 100644
+--- a/drivers/input/keyboard/locomokbd.c
++++ b/drivers/input/keyboard/locomokbd.c
+@@ -265,6 +265,7 @@ static int __devinit locomokbd_probe(struct locomo_dev *dev)
+ 	for (i = 0; i < LOCOMOKBD_NUMKEYS; i++)
+ 		set_bit(locomokbd->keycode[i], input_dev->keybit);
+ 	clear_bit(0, input_dev->keybit);
++	locomo_writel(0, locomokbd->base + LOCOMO_KSC);
+ 
+ 	/* attempt to get the interrupt */
+ 	err = request_irq(dev->irq[0], locomokbd_interrupt, 0, "locomokbd", locomokbd);
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0012-add-collie-touchscreen-driver.patch b/recipes/linux/linux-2.6.31/collie/0012-add-collie-touchscreen-driver.patch
new file mode 100644
index 0000000000..9ccb0ff6a1
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0012-add-collie-touchscreen-driver.patch
@@ -0,0 +1,533 @@
+From 0bc8b02b3f6ea77df20f7c7770d19261159d662d Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Tue, 6 Oct 2009 22:10:51 +0200
+Subject: [PATCH 12/15] add collie touchscreen driver
+
+Conflicts:
+
+	drivers/input/touchscreen/Kconfig
+	drivers/input/touchscreen/Makefile
+	drivers/mfd/Makefile
+---
+ drivers/input/touchscreen/Kconfig     |    6 +
+ drivers/input/touchscreen/Makefile    |    1 +
+ drivers/input/touchscreen/collie-ts.c |  449 +++++++++++++++++++++++++++++++++
+ drivers/mfd/Makefile                  |    1 -
+ include/linux/mfd/ucb1x00.h           |    3 +
+ 5 files changed, 459 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/input/touchscreen/collie-ts.c
+
+diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
+index 72e2712..bcd73a6 100644
+--- a/drivers/input/touchscreen/Kconfig
++++ b/drivers/input/touchscreen/Kconfig
+@@ -296,6 +296,12 @@ config TOUCHSCREEN_ATMEL_TSADCC
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called atmel_tsadcc.
+ 
++config TOUCHSCREEN_COLLIE_TS
++	tristate "Touchscreen collie support"
++	depends on MCP_UCB1200 && INPUT && !MCP_UCB1200_TS
++	help
++	  Driver for touchscreen on collie - sharp sl-5500.
++
+ config TOUCHSCREEN_UCB1400
+ 	tristate "Philips UCB1400 touchscreen"
+ 	depends on AC97_BUS
+diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
+index 3e1c5e0..a24d32c 100644
+--- a/drivers/input/touchscreen/Makefile
++++ b/drivers/input/touchscreen/Makefile
+@@ -29,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
+ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
+ obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
++obj-$(CONFIG_TOUCHSCREEN_COLLIE_TS)     += collie-ts.o
+ obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
+ obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
+ obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
+diff --git a/drivers/input/touchscreen/collie-ts.c b/drivers/input/touchscreen/collie-ts.c
+new file mode 100644
+index 0000000..c7c0272
+--- /dev/null
++++ b/drivers/input/touchscreen/collie-ts.c
+@@ -0,0 +1,449 @@
++/*
++ *  Touchscreen driver for UCB1x00-based touchscreens
++ *
++ *  Copyright (C) 2001 Russell King, All Rights Reserved.
++ *  Copyright (C) 2005 Pavel Machek
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * 21-Jan-2002 <jco@ict.es> :
++ *
++ * Added support for synchronous A/D mode. This mode is useful to
++ * avoid noise induced in the touchpanel by the LCD, provided that
++ * the UCB1x00 has a valid LCD sync signal routed to its ADCSYNC pin.
++ * It is important to note that the signal connected to the ADCSYNC
++ * pin should provide pulses even when the LCD is blanked, otherwise
++ * a pen touch needed to unblank the LCD will never be read.
++ */
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/smp.h>
++#include <linux/smp_lock.h>
++#include <linux/sched.h>
++#include <linux/completion.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <linux/input.h>
++#include <linux/device.h>
++#include <linux/freezer.h>
++#include <linux/slab.h>
++#include <linux/kthread.h>
++#include <linux/semaphore.h>
++
++#include <mach/dma.h>
++#include <mach/collie.h>
++#include <asm/mach-types.h>
++
++#include <linux/mfd/ucb1x00.h>
++
++struct ucb1x00_ts {
++	struct input_dev	*idev;
++	struct ucb1x00		*ucb;
++
++	wait_queue_head_t	irq_wait;
++	struct task_struct	*rtask;
++	u16			x_res;
++	u16			y_res;
++
++	unsigned int		adcsync:1;
++};
++
++static int adcsync;
++
++/**********************************
++
++     ................
++     .              . = 340
++     .              .
++     .             ^.
++     .             ^.
++     .             ^.
++     .             ^.
++     .              .
++     .             X. = 10
++     .  <<<<<<<<  Y .
++     ................
++     .   Sharp    =200
++     .              .
++     .  -   O    -  .
++     .              .
++     ................
++
++**********************************/
++
++
++static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y)
++{
++	struct input_dev *idev = ts->idev;
++
++	input_report_abs(idev, ABS_X, x);
++	input_report_abs(idev, ABS_Y, y);
++	input_report_abs(idev, ABS_PRESSURE, pressure);
++        input_report_key(idev, BTN_TOUCH, 1);
++	input_sync(idev);
++}
++
++static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts)
++{
++	struct input_dev *idev = ts->idev;
++
++	input_report_abs(idev, ABS_PRESSURE, 0);
++        input_report_key(idev, BTN_TOUCH, 0);
++	input_sync(idev);
++}
++
++/*
++ * Switch to interrupt mode. This set touchscreen to interrupt 
++ * mode, so that chip is able to send interrupt.
++ */
++static inline void ucb1x00_ts_mode_int(struct ucb1x00_ts *ts)
++{
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
++			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
++			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
++			UCB_TS_CR_MODE_INT);
++}
++
++/*
++ * Switch to pressure mode, and read pressure.  We don't need to wait
++ * here, since both plates are being driven.
++ *
++ * set_read_pressure() in sharp code
++ */
++static inline void ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
++{
++	ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
++			  UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW |
++			  UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
++
++	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
++			  UCB_ADC_INP_AD2 | 
++			  UCB_ADC_SYNC_ENA);
++	udelay(100);
++	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
++			  UCB_ADC_INP_AD2 | 
++			  UCB_ADC_SYNC_ENA | UCB_ADC_START);
++}
++
++/*
++ * Switch to X position mode and measure Y plate.  We switch the plate
++ * configuration in pressure mode, then switch to position mode.  This
++ * gives a faster response time.  Even so, we need to wait about 55us
++ * for things to stabilise.
++ */
++static inline void ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
++{
++	ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
++			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
++			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
++
++
++	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
++			  UCB_ADC_INP_TSPY | UCB_ADC_SYNC_ENA);
++	udelay(100);
++	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
++			  UCB_ADC_INP_TSPY | UCB_ADC_SYNC_ENA | 
++		 	  UCB_ADC_START);
++}
++
++/*
++ * Switch to Y position mode and measure X plate.  We switch the plate
++ * configuration in pressure mode, then switch to position mode.  This
++ * gives a faster response time.  Even so, we need to wait about 55us
++ * for things to stabilise.
++ */
++static inline void ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
++{
++	ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
++
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
++			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
++			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
++
++
++	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr | 
++			  UCB_ADC_INP_TSPX | UCB_ADC_SYNC_ENA);
++	udelay(100);
++	ucb1x00_reg_write(ts->ucb, UCB_ADC_CR, ts->ucb->adc_cr |
++			  UCB_ADC_INP_TSPX | UCB_ADC_SYNC_ENA | 
++			  UCB_ADC_START);
++}
++
++/*
++ * Switch to X plate resistance mode.  Set MX to ground, PX to
++ * supply.  Measure current.
++ */
++static inline unsigned int ucb1x00_ts_read_xres(struct ucb1x00_ts *ts)
++{
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
++			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
++			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
++	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
++}
++
++/*
++ * Switch to Y plate resistance mode.  Set MY to ground, PY to
++ * supply.  Measure current.
++ */
++static inline unsigned int ucb1x00_ts_read_yres(struct ucb1x00_ts *ts)
++{
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
++			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
++			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
++	return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
++}
++
++/*
++ * This is a RT kernel thread that handles the ADC accesses
++ * (mainly so we can use semaphores in the UCB1200 core code
++ * to serialise accesses to the ADC).
++ */
++static int ucb1x00_thread(void *_ts)
++{
++	struct ucb1x00_ts *ts = _ts;
++	struct task_struct *tsk = current;
++	DECLARE_WAITQUEUE(wait, tsk);
++	int state;
++
++	/*
++	 * We could run as a real-time thread.  However, thus far
++	 * this doesn't seem to be necessary.
++	 */
++
++	add_wait_queue(&ts->irq_wait, &wait);	
++
++	while (!kthread_should_stop()) {
++		unsigned int data[3];
++			
++		for (state=0; state<3; state++) {
++			
++			ucb1x00_adc_enable(ts->ucb);
++			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_ADC, UCB_FALLING);
++			switch (state) {
++			/* Order matters here; last measurement seems to be more noisy then the
++			   rest, and we care about pressure least */
++				case 2: ucb1x00_ts_read_pressure(ts);
++					break;
++				case 0: ucb1x00_ts_read_ypos(ts);
++					break;
++				case 1: ucb1x00_ts_read_xpos(ts);
++					break;
++			}
++			/* wait for adc */
++			try_to_freeze();
++			schedule_timeout(1000 * HZ);
++			ucb1x00_disable_irq(ts->ucb, UCB_IRQ_ADC, UCB_FALLING);
++			data[state] = UCB_ADC_DAT(ucb1x00_reg_read(ts->ucb, UCB_ADC_DATA));
++			ucb1x00_adc_disable(ts->ucb);
++		}	
++		
++		/* If not pressed any more, try to sleep! */
++		if (data[2] < 300) {
++			set_task_state(tsk, TASK_INTERRUPTIBLE);
++			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING);
++			ucb1x00_ts_mode_int(ts);
++			ucb1x00_disable(ts->ucb);
++			ucb1x00_ts_event_release(ts);
++			try_to_freeze();
++			schedule_timeout(1000 * HZ);
++			ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING);
++			ucb1x00_enable(ts->ucb);
++		} else {	
++			ucb1x00_ts_evt_add(ts, data[2], data[1], data[0]);
++		}
++		ucb1x00_disable(ts->ucb);
++		msleep(20);
++		ucb1x00_enable(ts->ucb);
++	}
++
++	remove_wait_queue(&ts->irq_wait, &wait);
++
++	ts->rtask = NULL;
++	return 0;
++}
++
++/*
++ * We only detect touch screen _touches_ with this interrupt
++ * handler, and even then we just schedule our task.
++ */
++static void ucb1x00_ts_irq(int idx, void *id)
++{
++	struct ucb1x00_ts *ts = id;
++	wake_up(&ts->irq_wait);
++}
++
++static void ucb1x00_adc_irq(int idx, void *id)
++{
++	struct ucb1x00_ts *ts = id;
++	wake_up(&ts->irq_wait);
++}
++
++static int ucb1x00_ts_open(struct input_dev *idev)
++{
++	struct ucb1x00_ts *ts = input_get_drvdata(idev);
++	int ret = 0;
++
++	BUG_ON(ts->rtask);
++
++	init_waitqueue_head(&ts->irq_wait);
++	
++	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
++	if (ret < 0)
++		return ret;
++	
++	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_ADC, ucb1x00_adc_irq, ts);
++	if (ret < 0) {
++		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
++		return ret;
++	}
++
++	ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_RISING);
++	
++	/*
++	 * If we do this at all, we should allow the user to
++	 * measure and read the X and Y resistance at any time.
++	 */
++	ucb1x00_adc_enable(ts->ucb);
++	ts->x_res = ucb1x00_ts_read_xres(ts);
++	ts->y_res = ucb1x00_ts_read_yres(ts);
++	ucb1x00_adc_disable(ts->ucb);
++
++	if (machine_is_collie()) {
++		ucb1x00_io_set_dir(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
++	}
++
++	ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd");
++	if (!IS_ERR(ts->rtask)) {
++		ret = 0;
++	} else {
++		ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
++		ts->rtask = NULL;
++		ret = -EFAULT;
++	}
++	
++	return ret;
++}
++
++/*
++ * Release touchscreen resources.  Disable IRQs.
++ */
++static void ucb1x00_ts_close(struct input_dev *idev)
++{
++	struct ucb1x00_ts *ts = input_get_drvdata(idev);
++
++	if (ts->rtask)
++		kthread_stop(ts->rtask);
++
++	ucb1x00_enable(ts->ucb);
++	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
++	ucb1x00_free_irq(ts->ucb, UCB_IRQ_ADC, ts);
++	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
++	ucb1x00_disable(ts->ucb);
++}
++
++#ifdef CONFIG_PM
++static int ucb1x00_ts_resume(struct ucb1x00_dev *dev)
++{
++	struct ucb1x00_ts *ts = dev->priv;
++
++	if (ts->rtask != NULL) {
++		/*
++		 * Restart the TS thread to ensure the
++		 * TS interrupt mode is set up again
++		 * after sleep.
++		 */
++		wake_up(&ts->irq_wait);
++	}
++	return 0;
++}
++#else
++#define ucb1x00_ts_resume NULL
++#endif
++
++
++/*
++ * Initialisation.
++ */
++static int ucb1x00_ts_add(struct ucb1x00_dev *dev)
++{
++	struct ucb1x00_ts *ts;
++	struct input_dev *idev;
++	int err;
++
++	ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL);
++	idev = input_allocate_device();
++	if (!ts || !idev) {
++		err = -ENOMEM;
++		goto fail;
++	}
++
++	ts->ucb = dev->ucb;
++	ts->idev = idev;
++	ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC;
++
++	input_set_drvdata(idev, ts);
++	idev->name       = "Touchscreen panel";
++	idev->id.product = ts->ucb->id;
++	idev->open       = ucb1x00_ts_open;
++	idev->close      = ucb1x00_ts_close;
++
++	__set_bit(EV_ABS, idev->evbit);
++	__set_bit(ABS_X, idev->absbit);
++	__set_bit(ABS_Y, idev->absbit);
++	__set_bit(ABS_PRESSURE, idev->absbit);
++
++        input_set_abs_params(ts->idev, ABS_X, 0, 450, 0, 0);
++        input_set_abs_params(ts->idev, ABS_Y, 200, 800, 0, 0);
++        input_set_abs_params(ts->idev, ABS_PRESSURE, 400, 800, 0, 0);
++
++
++	err = input_register_device(idev);
++	if (err)
++		goto fail;
++
++	dev->priv = ts;
++
++	return 0;
++
++ fail:
++	input_free_device(idev);
++	kfree(ts);
++	return err;
++}
++
++static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
++{
++	struct ucb1x00_ts *ts = dev->priv;
++
++	input_unregister_device(ts->idev);
++	kfree(ts);
++}
++
++static struct ucb1x00_driver ucb1x00_ts_driver = {
++	.add		= ucb1x00_ts_add,
++	.remove		= ucb1x00_ts_remove,
++	.resume		= ucb1x00_ts_resume,
++};
++
++static int __init ucb1x00_ts_init(void)
++{
++	return ucb1x00_register_driver(&ucb1x00_ts_driver);
++}
++
++static void __exit ucb1x00_ts_exit(void)
++{
++	ucb1x00_unregister_driver(&ucb1x00_ts_driver);
++}
++
++module_param(adcsync, int, 0444);
++module_init(ucb1x00_ts_init);
++module_exit(ucb1x00_ts_exit);
++
++MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
++MODULE_DESCRIPTION("UCB1x00 touchscreen driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
+index 6f8a9a1..184a8a9 100644
+--- a/drivers/mfd/Makefile
++++ b/drivers/mfd/Makefile
+@@ -32,7 +32,6 @@ obj-$(CONFIG_MCP)		+= mcp-core.o
+ obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
+ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
+ obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-ts.o
+-
+ ifeq ($(CONFIG_SA1100_ASSABET),y)
+ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
+ endif
+diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h
+index aa9c378..b13171e 100644
+--- a/include/linux/mfd/ucb1x00.h
++++ b/include/linux/mfd/ucb1x00.h
+@@ -37,7 +37,10 @@
+ #define UCB_IE_TCLIP		(1 << 14)
+ #define UCB_IE_ACLIP		(1 << 15)
+ 
++/* UCB1200 irqs */
++#define UCB_IRQ_ADC		11
+ #define UCB_IRQ_TSPX		12
++#define UCB_IRQ_TSMX		13
+ 
+ #define UCB_TC_A	0x05
+ #define UCB_TC_A_LOOP		(1 << 7)	/* UCB1200 */
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0013-add-sa1100-udc-hack-extra-hacked-for-collie.patch b/recipes/linux/linux-2.6.31/collie/0013-add-sa1100-udc-hack-extra-hacked-for-collie.patch
new file mode 100644
index 0000000000..446139d911
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0013-add-sa1100-udc-hack-extra-hacked-for-collie.patch
@@ -0,0 +1,70 @@
+From 6458bd21e2c8cc3f5be98d8ea33854eb53fb138f Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Thu, 8 Oct 2009 00:12:48 +0200
+Subject: [PATCH 13/15] add sa1100-udc hack (extra hacked for collie)
+
+---
+ arch/arm/mach-sa1100/include/mach/collie.h |    5 ++---
+ drivers/usb/gadget/Kconfig                 |   15 +++++++++++++++
+ drivers/usb/gadget/Makefile                |    1 +
+ 3 files changed, 18 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
+index 71a0b3f..1e5f492 100644
+--- a/arch/arm/mach-sa1100/include/mach/collie.h
++++ b/arch/arm/mach-sa1100/include/mach/collie.h
+@@ -23,11 +23,10 @@
+ #define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
+ #define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
+ #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
+-#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
++#define COLLIE_GPIO_LB_VOL_CHG	(COLLIE_SCOOP_GPIO_BASE + 8)
+ 
+ #define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+-				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
+-				COLLIE_SCP_LB_VOL_CHG)
++				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON)
+ #define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
+ 
+ /* GPIOs for gpiolib  */
+diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
+index 7f8e83a..d7da5c9 100644
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -500,6 +500,21 @@ config USB_LANGWELL
+ # LAST -- dummy/emulated controller
+ #
+ 
++config USB_GADGET_SA1100
++	boolean "SA1100 USB Device Port"
++	depends on ARCH_SA1100
++	select USB_GADGET_SELECTED
++	help
++
++	   Say "y" to link the driver statically, or "m" to build a
++	   dynamically linked module called "sa1100_udc" and force all
++	   gadget drivers to also be dynamically linked.
++
++config USB_SA1100
++	tristate
++	depends on USB_GADGET_SA1100
++	default USB_GADGET
++
+ config USB_GADGET_DUMMY_HCD
+ 	boolean "Dummy HCD (DEVELOPMENT)"
+ 	depends on USB=y || (USB=m && USB_GADGET=m)
+diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
+index e6017e6..1984d4a 100644
+--- a/drivers/usb/gadget/Makefile
++++ b/drivers/usb/gadget/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
+ obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
+ obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
++obj-$(CONFIG_USB_SA1100)	+= sa1100_udc.o
+ obj-$(CONFIG_USB_AT91)		+= at91_udc.o
+ obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0014-gadget-add-file.patch b/recipes/linux/linux-2.6.31/collie/0014-gadget-add-file.patch
new file mode 100644
index 0000000000..52dfd7eaa9
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0014-gadget-add-file.patch
@@ -0,0 +1,2568 @@
+From 14d5ae9ea28bf9418e6d58b4058019b1fe2d6877 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Fri, 9 Oct 2009 21:58:42 +0200
+Subject: [PATCH 14/15] gadget add file
+
+---
+ drivers/usb/gadget/sa1100_udc.c | 2447 +++++++++++++++++++++++++++++++++++++++
+ drivers/usb/gadget/sa1100_udc.h |   94 ++
+ 2 files changed, 2541 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/usb/gadget/sa1100_udc.c
+ create mode 100644 drivers/usb/gadget/sa1100_udc.h
+
+diff --git a/drivers/usb/gadget/sa1100_udc.c b/drivers/usb/gadget/sa1100_udc.c
+new file mode 100644
+index 0000000..5b9dad1
+--- /dev/null
++++ b/drivers/usb/gadget/sa1100_udc.c
+@@ -0,0 +1,2447 @@
++/*
++ * SA1100 USB Device Controller (UDC) driver.
++ *
++ * Copyright (C) Compaq Computer Corporation, 1998, 1999
++ * Copyright (C) Extenex Corporation, 2001
++ * Copyright (C) David Brownell, 2003
++ * Copyright (C) Nick Bane, 2005, 2006, 2007
++ *   Many fragments from pxa2xx_udc.c and mach-sa1100 driver with various
++ *   GPL Copyright authors incl Russel king and Nicolas Pitre
++ *   Working port to 2.6.32-1 by N C Bane
++ *
++ * This file provides interrupt routing and overall coordination for the
++ * sa1100 USB endpoints: ep0, ep1out-bulk, ep2in-bulk, as well as device
++ * initialization and some parts of USB "Chapter 9" device behavior.
++ *
++ * It implements the "USB gadget controller" API, abstracting most hardware
++ * details so that drivers running on top of this API are mostly independent
++ * of hardware.  A key exception is that ep0 logic needs to understand which
++ * endpoints a given controller has, and their capabilities.  Also, hardware
++ * that doesn't fully support USB (like sa1100) may need workarounds in the
++ * protocols implemented by device functions.
++ *
++ * See linux/Documentation/arm/SA1100/SA1100_USB for more info, or the
++ * kerneldoc for the API exposed to gadget drivers.
++ *
++ */
++//#define DEBUG	1
++//#define	VERBOSE	1
++
++//#define SA1100_USB_DEBUG
++#ifdef SA1100_USB_DEBUG
++static int sa1100_usb_debug=0;
++#endif
++
++#define NCB_DMA_FIX
++#ifdef NCB_DMA_FIX
++// This is a clunky fix for dma alignemnt issues
++// It should probably be done better by someone more 
++// steeped in DMA lore
++#include <linux/slab.h>
++#define SEND_BUFFER_SIZE 4096	/* this is probably a bit big */
++#define RECEIVE_BUFFER_SIZE 256	/* 64 may be all that is necessary */
++static char *send_buffer=NULL;
++static char *receive_buffer=NULL;
++#endif
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <mach/dma.h>
++#include <asm/system.h>
++#include <asm/mach-types.h>
++#include <asm/unaligned.h>
++
++#include <linux/usb.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++#if CONFIG_PROC_FS
++#include <linux/proc_fs.h>
++#endif
++
++#if defined(CONFIG_SA1100_BALLOON)
++#include <asm/arch/balloon2.h>
++#endif
++
++#if defined(CONFIG_SA1100_COLLIE)
++#include <linux/gpio.h>
++#include <mach/collie.h>
++#endif
++
++#define	DRIVER_VERSION		__DATE__
++
++#define	DMA_ADDR_INVALID (~(dma_addr_t)0)
++
++
++static const char driver_name [] = "sa1100_udc";
++static const char driver_desc [] = "SA-1110 USB Device Controller";
++
++static const char ep0name [] = "ep0";
++
++#ifdef	DEBUG
++static char *type_string (u8 bmAttributes)
++{
++	switch ( (bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
++	case USB_ENDPOINT_XFER_BULK:	return "bulk";
++	//case USB_ENDPOINT_XFER_ISOC:	return "iso";
++	case USB_ENDPOINT_XFER_INT:	return "intr";
++	};
++	return "control";
++}
++#endif
++
++#include <linux/dma-mapping.h>
++struct usb_stats_t {
++	 unsigned long ep0_fifo_write_failures;
++	 unsigned long ep0_bytes_written;
++	 unsigned long ep0_fifo_read_failures;
++	 unsigned long ep0_bytes_read;
++};
++
++struct usb_info_t {
++	dma_regs_t *dmaregs_tx, *dmaregs_rx;
++	int state;
++	unsigned char address;
++	struct usb_stats_t stats;
++};
++
++enum { kError=-1, kEvSuspend=0, kEvReset=1,
++	   kEvResume=2, kEvAddress=3, kEvConfig=4, kEvDeConfig=5 };
++int usbctl_next_state_on_event( int event ) {
++    return 0;
++}
++static struct usb_info_t usbd_info;
++
++/* receiver */
++void ep1_reset(void);
++void ep1_stall(void);
++int sa1100_usb_recv (struct usb_request *req, void (*callback) (int,int));
++
++/* xmitter */
++void ep2_reset(void);
++void ep2_stall(void);
++int sa1100_usb_send (struct usb_request *req, void (*callback) (int,int));
++
++/* UDC register utility functions */
++#define UDC_write(reg, val) { \
++	int i = 10000; \
++	do { \
++	  	(reg) = (val); \
++		if (i-- <= 0) { \
++			printk( "%s [%d]: write %#x to %p (%#lx) failed\n", \
++				__FUNCTION__, __LINE__, (val), &(reg), (reg)); \
++			break; \
++		} \
++	} while((reg) != (val)); \
++}
++
++#define UDC_set(reg, val) { \
++	int i = 10000; \
++	do { \
++		(reg) |= (val); \
++		if (i-- <= 0) { \
++			printk( "%s [%d]: set %#x of %p (%#lx) failed\n", \
++				__FUNCTION__, __LINE__, (val), &(reg), (reg)); \
++			break; \
++		} \
++	} while(!((reg) & (val))); \
++}
++
++#define UDC_clear(reg, val) { \
++	int i = 10000; \
++	do { \
++		(reg) &= ~(val); \
++		if (i-- <= 0) { \
++			printk( "%s [%d]: clear %#x of %p (%#lx) failed\n", \
++				__FUNCTION__, __LINE__, (val), &(reg), (reg)); \
++			break; \
++		} \
++	} while((reg) & (val)); \
++}
++
++#define UDC_flip(reg, val) { \
++	int i = 10000; \
++	(reg) = (val); \
++	do { \
++		(reg) = (val); \
++		if (i-- <= 0) { \
++			printk( "%s [%d]: flip %#x of %p (%#lx) failed\n", \
++				__FUNCTION__, __LINE__, (val), &(reg), (reg)); \
++			break; \
++		} \
++	} while(((reg) & (val))); \
++}
++
++#include "sa1100_udc.h"
++
++static struct sa1100_udc	*the_controller;
++static void nuke (struct sa1100_ep *, int status);
++static void done (struct sa1100_ep *ep, struct sa1100_request *req, int status);
++static inline void ep0_idle (struct sa1100_udc *dev)
++{
++	dev->ep0state = EP0_IDLE;
++}
++
++// ep0 handlers
++
++// 1 == lots of trace noise,  0 = only "important' stuff
++#define VERBOSITY 0
++
++#if 1 && !defined( ASSERT )
++#  define ASSERT(expr) \
++          if(!(expr)) { \
++          printk( "Assertion failed! %s,%s,%s,line=%d\n",\
++          #expr,__FILE__,__FUNCTION__,__LINE__); \
++          }
++#else
++#  define ASSERT(expr)
++#endif
++
++#if VERBOSITY
++#define PRINTKD(fmt, args...) printk( fmt , ## args)
++#else
++#define PRINTKD(fmt, args...)
++#endif
++
++/* other subroutines */
++unsigned int (*wrint)(void);
++void ep0_int_hndlr( void );
++static void ep0_queue(void *buf, unsigned int req, unsigned int act);
++static void write_fifo( void );
++static int read_fifo( struct usb_ctrlrequest * p );
++
++/* some voodo helpers  01Mar01ww */
++static void set_cs_bits( __u32 set_bits );
++static void set_de( void );
++static void set_ipr( void );
++static void set_ipr_and_de( void );
++static bool clear_opr( void );
++
++/***************************************************************************
++Inline Helpers
++***************************************************************************/
++
++/* Data extraction from usb_request_t fields */
++enum { kTargetDevice=0, kTargetInterface=1, kTargetEndpoint=2 };
++static inline int request_target( __u8 b ) { return (int) ( b & 0x0F); }
++
++static inline int windex_to_ep_num( __u16 w ) { return (int) ( w & 0x000F); }
++inline int type_code_from_request( __u8 by ) { return (( by >> 4 ) & 3); }
++
++/* following is hook for self-powered flag in GET_STATUS. Some devices
++   .. might like to override and return real info */
++static inline bool self_powered_hook( void ) { return true; }
++
++#if VERBOSITY
++/* "pcs" == "print control status" */
++static inline void pcs( void )
++{
++	 __u32 foo = Ser0UDCCS0;
++	 printk( "%8.8X: %s %s %s %s\n",
++			 foo,
++			 foo & UDCCS0_SE ? "SE" : "",
++			 foo & UDCCS0_OPR ? "OPR" : "",
++			 foo & UDCCS0_IPR ? "IPR" : "",
++			 foo & UDCCS0_SST ? "SST" : ""
++	 );
++}
++static inline void preq( struct usb_ctrlrequest * pReq )
++{
++	 static char * tnames[] = { "dev", "intf", "ep", "oth" };
++	 static char * rnames[] = { "std", "class", "vendor", "???" };
++	 char * psz;
++	 switch( pReq->bRequest ) {
++	 case USB_REQ_GET_STATUS: psz = "get stat"; break;
++	 case USB_REQ_CLEAR_FEATURE: psz = "clr feat"; break;
++	 case USB_REQ_SET_FEATURE: psz = "set feat"; break;
++	 case USB_REQ_SET_ADDRESS: psz = "set addr"; break;
++	 case USB_REQ_GET_DESCRIPTOR: psz = "get desc"; break;
++	 case USB_REQ_SET_DESCRIPTOR: psz = "set desc"; break;
++	 case USB_REQ_GET_CONFIGURATION: psz = "get cfg"; break;
++	 case USB_REQ_SET_CONFIGURATION: psz = "set cfg"; break;
++	 case USB_REQ_GET_INTERFACE: psz = "get intf"; break;
++	 case USB_REQ_SET_INTERFACE: psz = "set intf"; break;
++	 default: psz = "unknown"; break;
++	 }
++	 printk( "- [%s: %s req to %s. dir=%s]\n", psz,
++			 rnames[ (pReq->bRequestType >> 5) & 3 ],
++			 tnames[ pReq->bRequestType & 3 ],
++			 ( pReq->bRequestType & 0x80 ) ? "in" : "out" );
++}
++
++static inline void usbctl_dump_request(const char *prefix, const struct usb_ctrlrequest *req)
++{
++	printk("%s: bRequestType=0x%02x bRequest=0x%02x "
++		"wValue=0x%04x wIndex=0x%04x wLength=0x%04x\n",
++		prefix, req->bRequestType, req->bRequest,
++		le16_to_cpu(req->wValue), le16_to_cpu(req->wIndex),
++		le16_to_cpu(req->wLength));
++}
++#else
++static inline void pcs( void ){}
++//static inline void preq( void ){}
++static inline void preq( void *x ){}
++static inline void usbctl_dump_request(const char *prefix, const struct usb_ctrlrequest *req) {}
++#endif
++
++/***************************************************************************
++Globals
++***************************************************************************/
++static const char pszMe[] = "usbep0: ";
++
++
++/* global write struct to keep write
++   ..state around across interrupts */
++static struct {
++		unsigned char *p;
++		int bytes_left;
++} wr;
++
++/***************************************************************************
++Public Interface
++***************************************************************************/
++
++/* reset received from HUB (or controller just went nuts and reset by itself!)
++  so udc core has been reset, track this state here  */
++void ep0_reset(void)
++{
++	/* reset state machine */
++	wr.p = NULL;
++	wr.bytes_left = 0;
++	usbd_info.address=0;
++// needed?
++	Ser0UDCAR = 0;
++}
++
++
++/* handle interrupt for endpoint zero */
++
++inline void ep0_clear_write(void) {
++	wr.p = NULL;
++	wr.bytes_left = 0;
++}
++
++/* this is a config packet parser based on that from the updated HH 2.6 udc */
++static void ep0_read_packet(void)
++{
++	 unsigned char status_buf[2];  /* returned in GET_STATUS */
++	 struct usb_ctrlrequest req;
++	 int request_type;
++	 int n;
++	 __u32 address;
++	 __u32 in, out;
++
++	 /* reset previous count */
++	 the_controller->ep0_req_len=-1;
++
++	 /* read the setup request */
++	 n = read_fifo( &req );
++	 usbctl_dump_request("ep0_read_packet",&req);
++
++	 if ( n != sizeof( req ) ) {
++		  printk( "%ssetup begin: fifo READ ERROR wanted %d bytes got %d. "
++				  " Stalling out...\n",
++				  pszMe, sizeof( req ), n );
++		  /* force stall, serviced out */
++		  set_cs_bits( UDCCS0_FST | UDCCS0_SO  );
++		  goto sh_sb_end;
++	 }
++
++	 /* Is it a standard request? (not vendor or class request) */
++	 request_type = type_code_from_request( req.bRequestType );
++	 if ( request_type != 0 ) {
++		  printk( "%ssetup begin: unsupported bRequestType: %d ignored\n",
++				  pszMe, request_type );
++		  set_cs_bits( UDCCS0_DE | UDCCS0_SO );
++		  goto sh_sb_end;
++	 }
++
++	/* save requested reply size */
++	the_controller->ep0_req_len=le16_to_cpu(req.wLength);
++	PRINTKD("%s: request length is %d\n",__FUNCTION__,the_controller->ep0_req_len);
++
++#if VERBOSITY
++	 {
++	 unsigned char * pdb = (unsigned char *) &req;
++	 PRINTKD( "%2.2X %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X ",
++			 pdb[0], pdb[1], pdb[2], pdb[3], pdb[4], pdb[5], pdb[6], pdb[7]
++		  );
++	 preq( &req );
++	 }
++#endif
++
++	 /* Handle it */
++	 switch( req.bRequest ) {
++
++		  /* This first bunch have no data phase */
++
++	 case USB_REQ_SET_ADDRESS:
++		  address = (__u32) (req.wValue & 0x7F);
++		  /* when SO and DE sent, UDC will enter status phase and ack,
++			 ..propagating new address to udc core. Next control transfer
++			 ..will be on the new address. You can't see the change in a
++			 ..read back of CAR until then. (about 250us later, on my box).
++			 ..The original Intel driver sets S0 and DE and code to check
++			 ..that address has propagated here. I tried this, but it
++			 ..would only work sometimes! The rest of the time it would
++			 ..never propagate and we'd spin forever. So now I just set
++			 ..it and pray...
++		  */
++		  Ser0UDCAR = address;
++		  usbd_info.address = address;
++		  usbctl_next_state_on_event( kEvAddress );
++		  set_cs_bits( UDCCS0_SO | UDCCS0_DE );  /* no data phase */
++		  printk( "%sI have been assigned address: %d\n", pszMe, address );
++		  break;
++
++
++	 case USB_REQ_SET_CONFIGURATION:
++		  if ( req.wValue == 1 ) {
++			   /* configured */
++			   if (usbctl_next_state_on_event( kEvConfig ) != kError) {
++				/* (re)set the out and in max packet sizes */
++				PRINTKD( "%s: calling the_controller.driver->setup with SET_CONFIGURATION\n", __FUNCTION__ );
++				the_controller->driver->setup(&the_controller->gadget, &req);
++					in  = __le16_to_cpu( the_controller->ep[1].ep.maxpacket );
++					out = __le16_to_cpu( the_controller->ep[2].ep.maxpacket );
++					Ser0UDCOMP = ( out - 1 );
++					Ser0UDCIMP = ( in - 1 );
++				// we are configured
++				usbd_info.state = USB_STATE_CONFIGURED;
++				// enable rx and tx interrupts
++				Ser0UDCCR &= ~(UDCCR_RIM | UDCCR_TIM);
++
++				printk( "%sConfigured (OMP=%8.8X IMP=%8.8X)\n", pszMe, out, in );
++				break;
++			   }
++		  } else if ( req.wValue == 0 ) {
++			   /* de-configured */
++			   if (usbctl_next_state_on_event( kEvDeConfig ) != kError )
++					printk( "%sDe-Configured\n", pszMe );
++			usbd_info.state = 0;
++			Ser0UDCCR |= UDCCR_RIM | UDCCR_TIM;
++			ep1_reset ();
++			ep2_reset ();
++			printk("%s: de-configured. Tx and Rx interrupts disabled. ep1 and ep2 reset\n",__FUNCTION__);
++		  } else {
++			   printk( "%ssetup phase: Unknown "
++					   "\"set configuration\" data %d\n",
++					   pszMe, req.wValue );
++		  }
++		  set_cs_bits( UDCCS0_SO | UDCCS0_DE );  /* no data phase */
++		  break;
++
++	 case USB_REQ_CLEAR_FEATURE:
++		  /* could check data length, direction...26Jan01ww */
++		  if ( req.wValue == 0 ) { /* clearing ENDPOINT_HALT/STALL */
++			   int ep = windex_to_ep_num( req.wIndex );
++			   if ( ep == 1 ) {
++					printk( "%sclear feature \"endpoint halt\" "
++							" on receiver\n", pszMe );
++					ep1_reset();
++			   }
++			   else if ( ep == 2 ) {
++					printk( "%sclear feature \"endpoint halt\" "
++							"on xmitter\n", pszMe );
++					ep2_reset();
++			   } else {
++					printk( "%sclear feature \"endpoint halt\" "
++							"on unsupported ep # %d\n",
++							pszMe, ep );
++			   }
++		  } else {
++			   printk( "%sUnsupported feature selector (%d) "
++					   "in clear feature. Ignored.\n" ,
++					   pszMe, req.wValue );
++		  }
++		  set_cs_bits( UDCCS0_SO | UDCCS0_DE );  /* no data phase */
++		  break;
++
++	 case USB_REQ_SET_FEATURE:
++		  if ( req.wValue == 0 ) { /* setting ENDPOINT_HALT/STALL */
++			   int ep = windex_to_ep_num( req.wValue );
++			   if ( ep == 1 ) {
++					printk( "%set feature \"endpoint halt\" "
++							"on receiver\n", pszMe );
++					ep1_stall();
++			   }
++			   else if ( ep == 2 ) {
++					printk( "%sset feature \"endpoint halt\" "
++							" on xmitter\n", pszMe );
++					ep2_stall();
++			   } else {
++					printk( "%sset feature \"endpoint halt\" "
++							"on unsupported ep # %d\n",
++							pszMe, ep );
++			   }
++		  }
++		  else {
++			   printk( "%sUnsupported feature selector "
++					   "(%d) in set feature\n",
++					   pszMe, req.wValue );
++		  }
++		  set_cs_bits( UDCCS0_SO | UDCCS0_DE );  /* no data phase */
++		  break;
++
++		  /* The rest have a data phase that writes back to the host */
++	 case USB_REQ_GET_STATUS:
++		  /* return status bit flags */
++		  status_buf[0] = status_buf[1] = 0;
++		  n = request_target(req.bRequestType);
++		  switch( n ) {
++		  case kTargetDevice:
++			   if ( self_powered_hook() )
++					status_buf[0] |= 1;
++			   break;
++		  case kTargetInterface:
++			   break;
++		  case kTargetEndpoint:
++			   /* return stalled bit */
++			   n = windex_to_ep_num( req.wIndex );
++			   if ( n == 1 )
++					status_buf[0] |= (Ser0UDCCS1 & UDCCS1_FST) >> 4;
++			   else if ( n == 2 )
++					status_buf[0] |= (Ser0UDCCS2 & UDCCS2_FST) >> 5;
++			   else {
++					printk( "%sUnknown endpoint (%d) "
++							"in GET_STATUS\n", pszMe, n );
++			   }
++			   break;
++		  default:
++			   printk( "%sUnknown target (%d) in GET_STATUS\n",
++					   pszMe, n );
++			   /* fall thru */
++			   break;
++		  }
++		  PRINTKD("%s: GET_STATUS writing %d\n",__FUNCTION__,req.wLength);
++		  ep0_queue( status_buf, req.wLength, sizeof( status_buf ));
++		  break;
++	 case USB_REQ_GET_DESCRIPTOR:
++		  PRINTKD( "%s: calling the_controller.driver->setup with GET_DESCRIPTOR\n", __FUNCTION__ );
++		  the_controller->driver->setup(&the_controller->gadget, &req);
++		  break;
++	 case USB_REQ_GET_CONFIGURATION:
++		  PRINTKD( "%s: calling the_controller.driver->setup with GET_CONFIGURATION\n", __FUNCTION__ );
++		  the_controller->driver->setup(&the_controller->gadget, &req);
++		  break;
++	 case USB_REQ_GET_INTERFACE:
++		  PRINTKD( "%s: calling the_controller->driver->setup with GET_INTERFACE\n", __FUNCTION__ );
++		  the_controller->driver->setup(&the_controller->gadget, &req);
++		  break;
++	 case USB_REQ_SET_INTERFACE:
++		  PRINTKD( "%s: calling the_controller->driver->setup with SET_INTERFACE\n", __FUNCTION__ );
++		  the_controller->driver->setup(&the_controller->gadget, &req);
++		  break;
++	 default :
++		  printk("%sunknown request 0x%x\n", pszMe, req.bRequest);
++		  break;
++	 } /* switch( bRequest ) */
++
++sh_sb_end:
++	 return;
++
++}
++
++void ep0_int_hndlr(void)
++{
++	u32 cs_reg_in;
++
++	pcs();
++
++	cs_reg_in = Ser0UDCCS0;
++
++	/*
++	 * If "setup end" has been set, the usb controller has terminated
++	 * a setup transaction before we set DE. This happens during
++	 * enumeration with some hosts. For example, the host will ask for
++	 * our device descriptor and specify a return of 64 bytes. When we
++	 * hand back the first 8, the host will know our max packet size
++	 * and turn around and issue a new setup immediately. This causes
++	 * the UDC to auto-ack the new setup and set SE. We must then
++	 * "unload" (process) the new setup, which is what will happen
++	 * after this preamble is finished executing.
++	 */
++	if (cs_reg_in & UDCCS0_SE) {
++		PRINTKD("UDC: early termination of setup\n");
++
++		/*
++		 * Clear setup end
++		 */
++		set_cs_bits(UDCCS0_SSE);
++
++		/*
++		 * Clear any pending write.
++		 */
++		ep0_clear_write();
++	}
++
++	/*
++	 * UDC sent a stall due to a protocol violation.
++	 */
++	if (cs_reg_in & UDCCS0_SST) {
++		PRINTKD("UDC: write_preamble: UDC sent stall\n");
++
++		/*
++		 * Clear sent stall
++		 */
++		set_cs_bits(UDCCS0_SST);
++
++		/*
++		 * Clear any pending write.
++		 */
++		ep0_clear_write();
++	}
++
++	switch (cs_reg_in & (UDCCS0_OPR | UDCCS0_IPR)) {
++	case UDCCS0_OPR | UDCCS0_IPR:
++		PRINTKD("UDC: write_preamble: see OPR. Stopping write to "
++			"handle new SETUP\n");
++
++		/*
++		 * very rarely, you can get OPR and
++		 * leftover IPR. Try to clear
++		 */
++		UDC_clear(Ser0UDCCS0, UDCCS0_IPR);
++
++		/*
++		 * Clear any pending write.
++		 */
++		ep0_clear_write();
++
++		/*FALLTHROUGH*/
++	case UDCCS0_OPR:
++		/*
++		 * A new setup request is pending.  Handle
++		 * it. Note that we don't try to read a
++		 * packet if SE was set and OPR is clear.
++		 */
++		ep0_read_packet();
++		break;
++
++	case 0:
++		// if data pending ...
++		if (wr.p) {
++			unsigned int cs_bits = 0;
++			if (wr.bytes_left != 0) {
++				/*
++				 * More data to go
++				 */
++				write_fifo();
++				// packet ready
++				cs_bits |= UDCCS0_IPR;
++			}
++
++			if (wr.bytes_left == 0) {
++				/*
++				 * All data sent.
++				 */
++				cs_bits |= wrint();
++				// a null packet may be following
++				if (!wrint)
++				    ep0_clear_write();
++			}
++			set_cs_bits(cs_bits);
++		}
++		else
++		    PRINTKD("%s: No data - probably an ACK\n",__FUNCTION__);
++		break;
++
++	case UDCCS0_IPR:
++		PRINTKD("UDC: IPR set, not writing\n");
++		break;
++	}
++
++	pcs();
++	PRINTKD( "-end-\n" );
++}
++
++static unsigned int ep0_sh_write_data(void)
++{
++	/*
++	 * If bytes left is zero, we are coming in on the
++	 * interrupt after the last packet went out. And
++	 * we know we don't have to empty packet this
++	 * transfer so just set DE and we are done
++	 */
++	PRINTKD("UDC: normal packet ended\n");
++	wrint=NULL;
++	return UDCCS0_DE;
++}
++
++static unsigned int ep0_sh_write_with_empty_packet(void)
++{
++	/*
++	 * If bytes left is zero, we are coming in on the
++	 * interrupt after the last packet went out.
++	 * We must do short packet suff, so set DE and IPR
++	 */
++	PRINTKD("UDC: short packet sent\n");
++	wrint=NULL;
++	return UDCCS0_IPR | UDCCS0_DE;
++}
++
++static unsigned int ep0_sh_write_data_then_empty_packet(void)
++{
++	PRINTKD("UDC: last packet full. Send empty packet next\n");
++	wrint=ep0_sh_write_with_empty_packet;
++	return 0;
++}
++
++static void ep0_queue(void *buf, unsigned int len, unsigned int req_len)
++{
++	__u32 cs_reg_bits = UDCCS0_IPR;
++
++	PRINTKD("a=%d r=%d\n", len, req_len);
++
++	if (len == 0) {
++	    // no output packet to wait for
++	    PRINTKD("%s: zero byte packet being queued. Setting DE and OPR end exiting\n",__FUNCTION__);
++	    set_cs_bits(UDCCS0_DE | UDCCS0_SO);
++	    return;
++	}
++
++	/*
++	 * thou shalt not enter data phase until
++	 * Out Packet Ready is clear
++	 */
++	if (!clear_opr()) {
++		printk("UDC: SO did not clear OPR\n");
++		set_cs_bits(UDCCS0_DE | UDCCS0_SO);
++		return;
++	}
++
++	// note data to xmit stored
++	wr.p=buf;
++	wr.bytes_left=min(len, req_len);
++
++	// write the first block
++	write_fifo();
++
++	// done already?
++	if (wr.bytes_left == 0) {
++		/*
++		 * out in one, so data end
++		 */
++		cs_reg_bits |= UDCCS0_DE;
++		ep0_clear_write();
++	// rest is a shorter than expected reply?
++	} else if (len < req_len) {
++		/*
++		 * we are going to short-change host
++		 * so need nul to not stall
++		 */
++		 if (len % 8) {
++		    PRINTKD("%s: %d more to go ending in a short packet.\n",__FUNCTION__,wr.bytes_left);
++		    wrint=ep0_sh_write_with_empty_packet;
++		}
++		// unless we are on a packet boundary. Then send full packet plus null packet.
++		else {
++		    PRINTKD("%s: %d more to go then add empty packet.\n",__FUNCTION__,wr.bytes_left);
++		    wrint=ep0_sh_write_data_then_empty_packet;
++		}
++	} else {
++		/*
++		 * we have as much or more than requested
++		 */
++		PRINTKD("%s: %d more to go.\n",__FUNCTION__,wr.bytes_left);
++		wrint=ep0_sh_write_data;
++	}
++
++	/*
++	 * note: IPR was set uncondtionally at start of routine
++	 */
++	set_cs_bits(cs_reg_bits);
++}
++
++/*
++ * write_fifo()
++ * Stick bytes in the 8 bytes endpoint zero FIFO.
++ * This version uses a variety of tricks to make sure the bytes
++ * are written correctly. 1. The count register is checked to
++ * see if the byte went in, and the write is attempted again
++ * if not. 2. An overall counter is used to break out so we
++ * don't hang in those (rare) cases where the UDC reverses
++ * direction of the FIFO underneath us without notification
++ * (in response to host aborting a setup transaction early).
++ *
++ */
++static void write_fifo( void )
++{
++	int bytes_this_time = min(wr.bytes_left, 8);
++	int bytes_written = 0;
++
++	PRINTKD( "WF=%d: ", bytes_this_time );
++
++	while( bytes_this_time-- ) {
++		unsigned int cwc;
++		int i;
++		 PRINTKD( "%2.2X ", *wr.p );
++		cwc = Ser0UDCWC & 15;
++		 i = 10;
++		 do {
++			  Ser0UDCD0 = *wr.p;
++			  udelay( 20 );  /* voodo 28Feb01ww */
++		 } while( (Ser0UDCWC &15) == cwc && --i );
++
++		 if ( i == 0 ) {
++			  printk( "%swrite_fifo: write failure\n", pszMe );
++			  usbd_info.stats.ep0_fifo_write_failures++;
++		 }
++
++		 wr.p++;
++		 bytes_written++;
++	}
++	wr.bytes_left -= bytes_written;
++
++	/* following propagation voodo so maybe caller writing IPR in
++	   ..a moment might actually get it to stick 28Feb01ww */
++	udelay( 300 );
++
++	usbd_info.stats.ep0_bytes_written += bytes_written;
++	PRINTKD( "L=%d WCR=%8.8lX\n", wr.bytes_left, Ser0UDCWC );
++}
++/*
++ * read_fifo()
++ * Read 1-8 bytes out of FIFO and put in request.
++ * Called to do the initial read of setup requests
++ * from the host. Return number of bytes read.
++ *
++ * Like write fifo above, this driver uses multiple
++ * reads checked agains the count register with an
++ * overall timeout.
++ *
++ */
++static int
++read_fifo( struct usb_ctrlrequest * request )
++{
++	int bytes_read = 0;
++	int fifo_count;
++
++	unsigned char * pOut = (unsigned char*) request;
++
++	fifo_count = ( Ser0UDCWC & 0xFF );
++
++	ASSERT( fifo_count <= 8 );
++	PRINTKD( "RF=%d ", fifo_count );
++
++	while( fifo_count-- ) {
++		unsigned int cwc;
++		int i;
++
++		cwc = Ser0UDCWC & 15;
++
++		 i = 10;
++		 do {
++			  *pOut = (unsigned char) Ser0UDCD0;
++			  udelay( 20 );
++		 } while( ( Ser0UDCWC & 15 ) == cwc && --i );
++
++		 if ( i == 0 ) {
++			  printk( "%sread_fifo(): read failure\n", pszMe );
++			  usbd_info.stats.ep0_fifo_read_failures++;
++		 }
++		 pOut++;
++		 bytes_read++;
++	}
++
++	PRINTKD( "fc=%d\n", bytes_read );
++	usbd_info.stats.ep0_bytes_read++;
++	return bytes_read;
++}
++
++/* some voodo I am adding, since the vanilla macros just aren't doing it  1Mar01ww */
++
++#define ABORT_BITS ( UDCCS0_SST | UDCCS0_SE )
++#define OK_TO_WRITE (!( Ser0UDCCS0 & ABORT_BITS ))
++#define BOTH_BITS (UDCCS0_IPR | UDCCS0_DE)
++
++static void set_cs_bits( __u32 bits )
++{
++	 if ( bits & ( UDCCS0_SO | UDCCS0_SSE | UDCCS0_FST | UDCCS0_SST) )
++		  Ser0UDCCS0 = bits;
++	 else if ( (bits & BOTH_BITS) == BOTH_BITS )
++		  set_ipr_and_de();
++	 else if ( bits & UDCCS0_IPR )
++		  set_ipr();
++	 else if ( bits & UDCCS0_DE )
++		  set_de();
++}
++
++static void set_de( void )
++{
++	 int i = 1;
++	 while( 1 ) {
++		  if ( OK_TO_WRITE ) {
++				Ser0UDCCS0 |= UDCCS0_DE;
++		  } else {
++			   PRINTKD( "%sQuitting set DE because SST or SE set\n", pszMe );
++			   break;
++		  }
++		  if ( Ser0UDCCS0 & UDCCS0_DE )
++			   break;
++		  udelay( i );
++		  if ( ++i == 50  ) {
++			   printk( "%sDangnabbbit! Cannot set DE! (DE=%8.8X CCS0=%8.8lX)\n",
++					   pszMe, UDCCS0_DE, Ser0UDCCS0 );
++			   break;
++		  }
++	 }
++}
++
++static void set_ipr( void )
++{
++	 int i = 1;
++	 while( 1 ) {
++		  if ( OK_TO_WRITE ) {
++				Ser0UDCCS0 |= UDCCS0_IPR;
++		  } else {
++			   PRINTKD( "%sQuitting set IPR because SST or SE set\n", pszMe );
++			   break;
++		  }
++		  if ( Ser0UDCCS0 & UDCCS0_IPR )
++			   break;
++		  udelay( i );
++		  if ( ++i == 50  ) {
++			   printk( "%sDangnabbbit! Cannot set IPR! (IPR=%8.8X CCS0=%8.8lX)\n",
++					   pszMe, UDCCS0_IPR, Ser0UDCCS0 );
++			   break;
++		  }
++	 }
++}
++
++static void set_ipr_and_de( void )
++{
++	 int i = 1;
++	 while( 1 ) {
++		  if ( OK_TO_WRITE ) {
++			   Ser0UDCCS0 |= BOTH_BITS;
++		  } else {
++			   PRINTKD( "%sQuitting set IPR/DE because SST or SE set\n", pszMe );
++			   break;
++		  }
++		  if ( (Ser0UDCCS0 & BOTH_BITS) == BOTH_BITS)
++			   break;
++		  udelay( i );
++		  if ( ++i == 50  ) {
++			   printk( "%sDangnabbbit! Cannot set DE/IPR! (DE=%8.8X IPR=%8.8X CCS0=%8.8lX)\n",
++					   pszMe, UDCCS0_DE, UDCCS0_IPR, Ser0UDCCS0 );
++			   break;
++		  }
++	 }
++}
++
++static bool clear_opr( void )
++{
++	 int i = 10000;
++	 bool is_clear;
++	 do {
++		  Ser0UDCCS0 = UDCCS0_SO;
++		  is_clear  = ! ( Ser0UDCCS0 & UDCCS0_OPR );
++		  if ( i-- <= 0 ) {
++			   printk( "%sclear_opr(): failed\n", pszMe );
++			   break;
++		  }
++	 } while( ! is_clear );
++	 return is_clear;
++}
++
++
++
++// ep1 handlers
++
++static char *ep1_buf;
++static int ep1_len;
++static void (*ep1_callback)(int flag, int size);
++static char *ep1_curdmabuf;
++static dma_addr_t ep1_curdmapos;
++static int ep1_curdmalen;
++static int ep1_remain;
++static int ep1_used;
++
++static dma_regs_t *dmaregs_rx = NULL;
++static int rx_pktsize;
++
++static int naking;
++
++static void
++ep1_start(void)
++{
++	sa1100_reset_dma(dmaregs_rx);
++	if (!ep1_curdmalen) {
++	  	ep1_curdmalen = rx_pktsize;
++		if (ep1_curdmalen > ep1_remain)
++			ep1_curdmalen = ep1_remain;
++		ep1_curdmapos = dma_map_single(NULL, ep1_curdmabuf, ep1_curdmalen,
++					       DMA_FROM_DEVICE);
++	}
++
++	UDC_write( Ser0UDCOMP, ep1_curdmalen-1 );
++
++	sa1100_start_dma(dmaregs_rx, ep1_curdmapos, ep1_curdmalen);
++
++	if ( naking ) {
++		/* turn off NAK of OUT packets, if set */
++		UDC_flip( Ser0UDCCS1, UDCCS1_RPC );
++		naking = 0;
++	}
++}
++
++static void
++ep1_done(int flag)
++{
++	int size = ep1_len - ep1_remain;
++
++	if (!ep1_len)
++		return;
++	if (ep1_curdmalen)
++		dma_unmap_single(NULL, ep1_curdmapos, ep1_curdmalen,
++				 DMA_FROM_DEVICE);
++	ep1_len = ep1_curdmalen = 0;
++	if (ep1_callback)
++		ep1_callback(flag, size);
++}
++
++void
++ep1_state_change_notify( int new_state )
++{
++
++}
++
++void
++ep1_stall( void )
++{
++	/* SET_FEATURE force stall at UDC */
++	UDC_set( Ser0UDCCS1, UDCCS1_FST );
++}
++
++int
++ep1_init(dma_regs_t *dmaregs)
++{
++	dmaregs_rx = dmaregs;
++	sa1100_reset_dma(dmaregs_rx);
++	ep1_done(-EAGAIN);
++	return 0;
++}
++
++void
++ep1_reset(void)
++{
++	if (dmaregs_rx)
++	    sa1100_reset_dma(dmaregs_rx);
++	UDC_clear(Ser0UDCCS1, UDCCS1_FST);
++	ep1_done(-EINTR);
++}
++
++void ep1_int_hndlr(int udcsr)
++{
++	dma_addr_t dma_addr;
++	unsigned int len;
++	int status = Ser0UDCCS1;
++
++	if ( naking ) printk( "%sEh? in ISR but naking = %d\n", "usbrx: ", naking );
++
++	if (status & UDCCS1_RPC) {
++
++		if (!ep1_curdmalen) {
++			printk("usb_recv: RPC for non-existent buffer\n");
++			naking=1;
++			return;
++		}
++
++		sa1100_stop_dma(dmaregs_rx);
++
++		if (status & UDCCS1_SST) {
++			printk("usb_recv: stall sent OMP=%ld\n", Ser0UDCOMP);
++			UDC_flip(Ser0UDCCS1, UDCCS1_SST);
++			ep1_done(-EIO); // UDC aborted current transfer, so we do
++			return;
++		}
++
++		if (status & UDCCS1_RPE) {
++			printk("usb_recv: RPError %x\n", status);
++			UDC_flip(Ser0UDCCS1, UDCCS1_RPC);
++			ep1_done(-EIO);
++			return;
++		}
++
++		dma_addr=sa1100_get_dma_pos(dmaregs_rx);
++		dma_unmap_single(NULL, ep1_curdmapos, ep1_curdmalen,
++				 DMA_FROM_DEVICE);
++		len = dma_addr - ep1_curdmapos;
++#ifdef SA1100_USB_DEBUG
++		if (sa1100_usb_debug) {
++		    int i;
++		    printk("usb rx %d :\n  ",len);
++		    if (sa1100_usb_debug>1) {
++				for (i=0; i<len; i++) {
++			    	if ((i % 32)==31)
++					printk("\n  ");
++			    	printk("%2.2x ",((char *)ep1_curdmapos)[i]);
++				}
++		    }
++		    printk("\n");
++		}
++#endif
++		if (len < ep1_curdmalen) {
++			char *buf = ep1_curdmabuf + len;
++			while (Ser0UDCCS1 & UDCCS1_RNE) {
++				if (len >= ep1_curdmalen) {
++					printk("usb_recv: too much data in fifo\n");
++					break;
++				}
++				*buf++ = Ser0UDCDR;
++				len++;
++			}
++		} else if (Ser0UDCCS1 & UDCCS1_RNE) {
++			printk("usb_recv: fifo screwed, shouldn't contain data\n");
++			len = 0;
++		}
++
++#if defined(NCB_DMA_FIX)
++//		if (len && (ep1_buf != ep1_curdmabuf))
++//		    memcpy(ep1_buf,ep1_curdmabuf,len);
++		if (len)
++		    memcpy(&(((unsigned char *)ep1_buf)[ep1_used]),ep1_curdmabuf,len);
++#endif
++
++		ep1_curdmalen = 0;  /* dma unmap already done */
++		ep1_remain -= len;
++		ep1_used += len;
++//		ep1_curdmabuf += len;	// use same buffer again
++		naking = 1;
++//printk("%s: received %d, %d remaining\n",__FUNCTION__,len,ep1_remain);
++		if (len && (len == rx_pktsize))
++		    ep1_start();
++		else
++		ep1_done((len) ? 0 : -EPIPE);
++	}
++	/* else, you can get here if we are holding NAK */
++}
++
++int
++sa1100_usb_recv(struct usb_request *req, void (*callback)(int flag, int size))
++{
++	unsigned long flags;
++	char *buf=req->buf;
++	int len=req->length;
++
++	if (ep1_len)
++		return -EBUSY;
++
++	local_irq_save(flags);
++	ep1_buf = buf;
++	ep1_len = len;
++	ep1_callback = callback;
++	ep1_remain = len;
++	ep1_used = 0;
++#ifdef NCB_DMA_FIX
++//	if (((size_t)buf)&3)
++ 	if (1)
++	    ep1_curdmabuf = receive_buffer;
++	else
++#else
++	ep1_curdmabuf = buf;
++#endif
++	ep1_curdmalen = 0;
++	ep1_start();
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++// ep2 handlers
++
++static char *ep2_buf;
++static int ep2_len;
++static void (*ep2_callback)(int status, int size);
++static dma_addr_t ep2_dma;
++static dma_addr_t ep2_curdmapos;
++static int ep2_curdmalen;
++static int ep2_remain;
++static dma_regs_t *dmaregs_tx = NULL;
++static int tx_pktsize;
++
++/* device state is changing, async */
++void
++ep2_state_change_notify( int new_state )
++{
++}
++
++/* set feature stall executing, async */
++void
++ep2_stall( void )
++{
++	UDC_set( Ser0UDCCS2, UDCCS2_FST );  /* force stall at UDC */
++}
++
++static void
++ep2_start(void)
++{
++	if (!ep2_len)
++		return;
++
++	ep2_curdmalen = tx_pktsize;
++	if (ep2_curdmalen > ep2_remain)
++		ep2_curdmalen = ep2_remain;
++
++	/* must do this _before_ queue buffer.. */
++	UDC_flip( Ser0UDCCS2,UDCCS2_TPC );  /* stop NAKing IN tokens */
++	UDC_write( Ser0UDCIMP, ep2_curdmalen-1 );
++
++	Ser0UDCAR = usbd_info.address; // fighting stupid silicon bug
++	sa1100_start_dma(dmaregs_tx, ep2_curdmapos, ep2_curdmalen);
++}
++
++static void
++ep2_done(int flag)
++{
++	int size = ep2_len - ep2_remain;
++	if (ep2_len) {
++		dma_unmap_single(NULL, ep2_dma, ep2_len, DMA_TO_DEVICE);
++		ep2_len = 0;
++		if (ep2_callback)
++			ep2_callback(flag, size);
++	}
++}
++
++int ep2_init(dma_regs_t *dmaregs)
++{
++	dmaregs_tx = dmaregs;
++	sa1100_reset_dma(dmaregs_tx);
++	ep2_done(-EAGAIN);
++	return 0;
++}
++
++void ep2_reset(void)
++{
++	UDC_clear(Ser0UDCCS2, UDCCS2_FST);
++	if (dmaregs_tx)
++	    sa1100_reset_dma(dmaregs_tx);
++	ep2_done(-EINTR);
++}
++
++void ep2_int_hndlr(int udcsr)
++{
++	int status = Ser0UDCCS2;
++
++	if (Ser0UDCAR != usbd_info.address) // check for stupid silicon bug.
++		Ser0UDCAR = usbd_info.address;
++
++	if (status & UDCCS2_TPC) {
++
++		UDC_flip(Ser0UDCCS2, UDCCS2_SST);
++
++		sa1100_reset_dma(dmaregs_tx);
++
++		if (status & (UDCCS2_TPE | UDCCS2_TUR)) {
++			printk("usb_send: transmit error %x\n", status);
++			ep2_done(-EIO);
++		} else {
++			ep2_curdmapos += ep2_curdmalen;
++			ep2_remain -= ep2_curdmalen;
++
++			if (ep2_remain != 0)
++				ep2_start();
++			else
++				ep2_done(0);
++		}
++	} else {
++		printk("usb_send: Not TPC: UDCCS2 = %x\n", status);
++	}
++}
++
++int
++sa1100_usb_send(struct usb_request *req, void (*callback)(int status, int size))
++{
++	char *buf=req->buf;
++	int len=req->length;
++	unsigned long flags;
++
++	if (usbd_info.state != USB_STATE_CONFIGURED) {
++		PRINTKD("%s: return -ENODEV\n",__FUNCTION__);
++		return -ENODEV;
++	}
++
++	if (ep2_len) {
++		PRINTKD("%s: return -EBUSY\n",__FUNCTION__);
++		return -EBUSY;
++	}
++
++	local_irq_save(flags);
++#ifdef NCB_DMA_FIX
++	// if misaligned, copy to aligned buffer
++//	if (((size_t)buf)&3) {
++	if (1) {
++	    PRINTKD("%s: copying %d bytes to send_buffer\n",__FUNCTION__,len);
++	    memcpy(send_buffer,buf,len);
++	    ep2_buf = send_buffer;
++	}
++	else
++#endif
++	ep2_buf = buf;
++
++	ep2_len = len;
++	ep2_dma = dma_map_single(NULL, ep2_buf, len,DMA_TO_DEVICE);
++	PRINTKD("%s: mapped dma to buffer(%p0\n",__FUNCTION__,buf);
++
++	ep2_callback = callback;
++	ep2_remain = len;
++	ep2_curdmapos = ep2_dma;
++
++	PRINTKD("%s: calling ep2_start\n",__FUNCTION__);
++	ep2_start();
++	local_irq_restore(flags);
++
++	return 0;
++}
++/*-------------------------------------------------------------------------*/
++
++static int
++sa1100_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
++{
++	struct sa1100_udc	*dev;
++	struct sa1100_ep	*ep;
++	u32			max;
++	int			type;
++
++	ep = container_of (_ep, struct sa1100_ep, ep);
++	if (!_ep || !desc || ep->desc || _ep->name == ep0name
++			|| desc->bDescriptorType != USB_DT_ENDPOINT) {
++		PRINTKD("%s: _ep = %p, desc = %p\n",__FUNCTION__,_ep,desc);
++		if (_ep && desc)
++		    PRINTKD("%s: ep->desc = %p, _ep->name = %s desc->bDescriptorType = %s\n",__FUNCTION__,ep->desc,_ep->name,
++			(desc->bDescriptorType == USB_DT_ENDPOINT) ? "USB_DT_ENDPOINT":"bad!!");
++		return -EINVAL;
++	}
++
++	dev = ep->dev;
++	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
++		return -ESHUTDOWN;
++
++	type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
++	max = le16_to_cpu (desc->wMaxPacketSize);
++	switch (max) {
++	case 64: case 32:
++	/* note:  maxpacket > 16 means DMA might overrun/underrun */
++	case 16: case 8:
++		break;
++	default:
++		if (type == USB_ENDPOINT_XFER_INT && max < 64)
++			break;
++		return -EDOM;
++	}
++
++	switch (type) {
++	case USB_ENDPOINT_XFER_BULK:
++	case USB_ENDPOINT_XFER_INT:
++		if (ep == &dev->ep[2]) {
++			if (desc->bEndpointAddress != (USB_DIR_IN|2)) {
++				PRINTKD("%s: ep[2] has invalid endpoint\n",__FUNCTION__);
++				return -EINVAL;
++			}
++			tx_pktsize = max;
++			Ser0UDCOMP = max - 1;
++			PRINTKD("%s: ep2 max packet size is %d\n",__FUNCTION__,max);
++			break;
++		} else if (ep == &dev->ep[1]) {
++			if (desc->bEndpointAddress != (USB_DIR_OUT|1)) {
++				PRINTKD("%s: ep[1] has invalid endpoint\n",__FUNCTION__);
++				return -EINVAL;
++			}
++			rx_pktsize = max;
++			Ser0UDCIMP = max - 1;
++			PRINTKD("%s: ep1 max packet size is %d\n",__FUNCTION__,max);
++			break;
++		}
++		// FALLTHROUGH
++	default:
++		PRINTKD("%s: Invalid endpoint\n",__FUNCTION__);
++		return -EINVAL;
++	}
++
++	_ep->maxpacket = max;
++	ep->desc = desc;
++	ep->stopped = 0;
++
++	DEBUG (dev, "enabled %s %s max %04x\n", _ep->name,
++		type_string (desc->bmAttributes), max);
++
++	return 0;
++}
++
++static int sa1100_disable (struct usb_ep *_ep)
++{
++	struct sa1100_ep	*ep;
++
++	ep = container_of (_ep, struct sa1100_ep, ep);
++	if (!_ep || !ep->desc || _ep->name == ep0name)
++		return -EINVAL;
++
++	nuke (ep, -ESHUTDOWN);
++
++	DEBUG (ep->dev, "disabled %s\n", _ep->name);
++
++	ep->desc = NULL;
++	ep->stopped = 1;
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_request *
++sa1100_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
++{
++	struct sa1100_request *req;
++
++	if (!_ep)
++		return 0;
++
++	req = kzalloc(sizeof *req, gfp_flags);
++	if (!req)
++		return 0;
++
++	memset (req, 0, sizeof *req);
++	req->req.dma = DMA_ADDR_INVALID;
++	INIT_LIST_HEAD (&req->queue);
++	return &req->req;
++}
++
++static void sa1100_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct sa1100_request	*req;
++
++	req = container_of (_req, struct sa1100_request, req);
++	WARN_ON (!list_empty (&req->queue));
++	kfree(req);	//NCB - see pxa2xx_udc
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void done(struct sa1100_ep *ep, struct sa1100_request *req, int status)
++{
++	unsigned		stopped = ep->stopped;
++
++	list_del_init (&req->queue);
++
++	if (likely(req->req.status == -EINPROGRESS))
++		req->req.status = status;
++	else
++		status = req->req.status;
++
++	if (status && status != -ESHUTDOWN)
++		VDEBUG (ep->dev, "complete %s req %p stat %d len %u/%u\n",
++			ep->ep.name, &req->req, status,
++			req->req.actual, req->req.length);
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	req->req.complete (&ep->ep, &req->req);
++	ep->stopped = stopped;
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* FIXME move away from the old non-queued api.
++ * - forces extra work on us
++ * - stores request state twice
++ * - doesn't let gadget driver handle dma mapping
++ * - status codes need mapping
++ */
++
++static int map_status(int status)
++{
++	switch (status) {
++	case 0:
++	case -EIO:	/* ep[12]_int_handler */
++		return status;
++	case -EPIPE:	/* ep1_int_handler */
++		return 0;
++	//  case -EAGAIN: 	/* ep[12]_init */
++	//  case -EINTR:	/* ep[12]_reset */
++	default:
++		return -ESHUTDOWN;
++	}
++}
++
++static void tx_callback(int status, int size)
++{
++	struct sa1100_ep	*ep = &the_controller->ep[2];
++	struct sa1100_request	*req;
++
++	if (list_empty (&ep->queue)) {
++		if (status != -EAGAIN)
++			DEBUG (ep->dev, "%s, bogus tx callback %d/%d\n",
++				ep->ep.name, status, size);
++		return;
++	}
++	req = list_entry (ep->queue.next, struct sa1100_request, queue);
++	req->req.actual = size;
++	done (ep, req, map_status (status));
++
++	if (ep->stopped || list_empty (&ep->queue))
++		return;
++	req = list_entry (ep->queue.next, struct sa1100_request, queue);
++	sa1100_usb_send (&req->req, tx_callback);
++}
++
++static void rx_callback (int status, int size)
++{
++	struct sa1100_ep	*ep = &the_controller->ep[1];
++	struct sa1100_request	*req;
++
++	if (list_empty (&ep->queue)) {
++		if (status != -EAGAIN)
++			DEBUG (ep->dev, "%s, bogus tx callback %d/%d\n",
++				ep->ep.name, status, size);
++		return;
++	}
++	req = list_entry (ep->queue.next, struct sa1100_request, queue);
++	req->req.actual = size;
++	done (ep, req, map_status (status));
++
++	if (ep->stopped || list_empty (&ep->queue))
++		return;
++	req = list_entry (ep->queue.next, struct sa1100_request, queue);
++	sa1100_usb_recv (&req->req, rx_callback);
++}
++
++
++static int
++sa1100_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
++{
++	struct sa1100_request	*req;
++	struct sa1100_ep	*ep;
++	struct sa1100_udc	*dev;
++	unsigned long		flags;
++
++	req = container_of (_req, struct sa1100_request, req);
++	if (!_req || !_req->complete || !_req->buf
++			|| !list_empty (&req->queue))
++		return -EINVAL;
++
++	ep = container_of (_ep, struct sa1100_ep, ep);
++	if (unlikely(!_ep || (!ep->desc && _ep->name != ep0name)))
++		return -EINVAL;
++
++	dev = ep->dev;
++	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
++		return -ESHUTDOWN;
++
++	// handle ep0
++	if (_ep->name == ep0name) {
++	    ep0_queue( _req->buf, _req->length, dev->ep0_req_len >=0 ? dev->ep0_req_len: _req->length );
++	    return 0;
++	}
++
++	/* sa1100 udc can't write zlps */
++	if (ep == &dev->ep[2] && _req->length == 0)
++		return -ERANGE;
++
++	/* the old sa1100 api doesn't use 'unsigned' for lengths */
++	if (_req->length > INT_MAX)
++		return -ERANGE;
++
++	VDEBUG (dev, "%s queue req %p, len %d buf %p\n",
++			_ep->name, _req, _req->length, _req->buf);
++
++	local_irq_save (flags);
++
++	_req->status = -EINPROGRESS;
++	_req->actual = 0;
++
++	if (list_empty (&ep->queue) && !ep->stopped) {
++		/* FIXME this does DMA mapping wrong.  caller is allowed
++		 * to provide buffers that don't need mapping, but this
++		 * doesn't use them.
++		 */
++		if (ep == &ep->dev->ep[2]) {
++			PRINTKD("%s: sa1100_usb_send buf %p length %d\n",__FUNCTION__,_req->buf,_req->length);
++			sa1100_usb_send (_req, tx_callback);
++		}
++		else if (ep == &ep->dev->ep[1]) {
++			PRINTKD("%s: sa1100_usb_recv buf %p length %d\n",__FUNCTION__,_req->buf,_req->length);
++			sa1100_usb_recv (_req, rx_callback);
++		}
++		/* ep0 rx/tx is handled separately */
++	}
++	list_add_tail (&req->queue, &ep->queue);
++
++	local_irq_restore (flags);
++
++	return 0;
++}
++
++/* dequeue ALL requests */
++static void nuke (struct sa1100_ep *ep, int status)
++{
++	struct sa1100_request	*req;
++
++	/* called with irqs blocked */
++	while (!list_empty (&ep->queue)) {
++		req = list_entry (ep->queue.next,
++				struct sa1100_request,
++				queue);
++		done (ep, req, status);
++	}
++	if (ep == &ep->dev->ep[1])
++		ep1_reset ();
++	else if (ep == &ep->dev->ep[2])
++		ep2_reset ();
++}
++
++/* dequeue JUST ONE request */
++static int sa1100_dequeue (struct usb_ep *_ep, struct usb_request *_req)
++{
++	struct sa1100_ep	*ep;
++	struct sa1100_request	*req;
++	unsigned long		flags;
++
++	ep = container_of (_ep, struct sa1100_ep, ep);
++	if (!_ep || (!ep->desc && _ep->name != ep0name) || !_req)
++		return -EINVAL;
++
++	local_irq_save (flags);
++
++	/* make sure it's actually queued on this endpoint */
++	list_for_each_entry (req, &ep->queue, queue) {
++		if (&req->req == _req)
++			break;
++	}
++	if (&req->req != _req) {
++		local_irq_restore(flags);
++		return -EINVAL;
++	}
++
++	done(ep, req, -ECONNRESET);
++
++	local_irq_restore(flags);
++
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static int
++sa1100_set_halt (struct usb_ep *_ep, int value)
++{
++	struct sa1100_ep	*ep;
++
++	ep = container_of (_ep, struct sa1100_ep, ep);
++	if (unlikely(!_ep 
++		|| (!ep->desc && _ep->name != ep0name))
++		|| (ep->desc->bmAttributes & 0x03) == USB_ENDPOINT_XFER_ISOC)
++		return -EINVAL;
++	if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
++		return -ESHUTDOWN;
++
++	VDEBUG (ep->dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
++
++	/* set/clear, then synch memory views with the device */
++	if (value) {
++		if (ep == &ep->dev->ep[1])
++			ep1_stall ();
++		else
++			ep2_stall ();
++	} else {
++		if (ep == &ep->dev->ep[1])
++			ep1_reset ();
++		else
++			ep2_reset ();
++	}
++
++	return 0;
++}
++
++static struct usb_ep_ops sa1100_ep_ops = {
++	.enable		= sa1100_enable,
++	.disable	= sa1100_disable,
++
++	.alloc_request	= sa1100_alloc_request,
++	.free_request	= sa1100_free_request,
++
++	.queue		= sa1100_queue,
++	.dequeue	= sa1100_dequeue,
++
++	.set_halt	= sa1100_set_halt,
++	// .fifo_status	= sa1100_fifo_status,
++	// .fifo_flush	= sa1100_fifo_flush,
++};
++
++/*-------------------------------------------------------------------------*/
++
++static int sa1100_get_frame (struct usb_gadget *_gadget)
++{
++	return -EOPNOTSUPP;
++}
++
++static int sa1100_wakeup (struct usb_gadget *_gadget)
++{
++	struct sa1100_udc	*dev;
++
++	if (!_gadget)
++		return 0;
++	dev = container_of (_gadget, struct sa1100_udc, gadget);
++
++	// FIXME
++
++	return 0;
++}
++
++static const struct usb_gadget_ops sa1100_ops = {
++	.get_frame	= sa1100_get_frame,
++	.wakeup		= sa1100_wakeup,
++
++	// .set_selfpowered = sa1100_set_selfpowered,
++};
++
++/*-------------------------------------------------------------------------*/
++
++static inline void enable_resume_mask_suspend (void)
++{
++	 int i = 0;
++
++	 while (1) {
++		  Ser0UDCCR |= UDCCR_SUSIM; // mask future suspend events
++		  udelay (i);
++		  if ( (Ser0UDCCR & UDCCR_SUSIM) || (Ser0UDCSR & UDCSR_RSTIR))
++			   break;
++		  if (++i == 50) {
++			   WARN_ (&the_controller, "%s Could not set SUSIM %8.8lX\n",
++			   		__FUNCTION__, Ser0UDCCR);
++			   break;
++		  }
++	 }
++
++	 i = 0;
++	 while (1) {
++		  Ser0UDCCR &= ~UDCCR_RESIM;
++		  udelay (i);
++		  if ( (Ser0UDCCR & UDCCR_RESIM) == 0
++			   	|| (Ser0UDCSR & UDCSR_RSTIR))
++			   break;
++		  if (++i == 50) {
++			   WARN_ (&the_controller, "%s Could not clear RESIM %8.8lX\n",
++			   		__FUNCTION__, Ser0UDCCR);
++			   break;
++		  }
++	 }
++}
++
++static inline void enable_suspend_mask_resume (void)
++{
++	 int i = 0;
++	 while (1) {
++		  Ser0UDCCR |= UDCCR_RESIM; // mask future resume events
++		  udelay (i);
++		  if (Ser0UDCCR & UDCCR_RESIM || (Ser0UDCSR & UDCSR_RSTIR))
++			   break;
++		  if (++i == 50) {
++			   WARN_ (&the_controller, "%s could not set RESIM %8.8lX\n",
++			   		__FUNCTION__, Ser0UDCCR);
++			   break;
++		  }
++	 }
++	 i = 0;
++	 while (1) {
++		  Ser0UDCCR &= ~UDCCR_SUSIM;
++		  udelay (i);
++		  if ( (Ser0UDCCR & UDCCR_SUSIM) == 0
++			   	|| (Ser0UDCSR & UDCSR_RSTIR))
++			   break;
++		  if (++i == 50) {
++			   WARN_ (&the_controller, "%s Could not clear SUSIM %8.8lX\n",
++			   		__FUNCTION__, Ser0UDCCR);
++			   break;
++		  }
++	 }
++}
++
++// HACK DEBUG  3Mar01ww
++// Well, maybe not, it really seems to help!  08Mar01ww
++static void core_kicker (void)
++{
++	u32 car = Ser0UDCAR;
++	u32 imp = Ser0UDCIMP;
++	u32 omp = Ser0UDCOMP;
++
++	UDC_set (Ser0UDCCR, UDCCR_UDD);
++	udelay (300);
++	UDC_clear (Ser0UDCCR, UDCCR_UDD);
++
++	Ser0UDCAR = car;
++	Ser0UDCIMP = imp;
++	Ser0UDCOMP = omp;
++}
++
++static irqreturn_t udc_int_hndlr(int irq, void *_dev)
++{
++	struct sa1100_udc	*dev = _dev;
++  	u32			status = Ser0UDCSR;
++
++	PRINTKD("%s: status = 0x%x and control = 0x%lx\n", __FUNCTION__,
++			status, Ser0UDCCR);
++	/* ReSeT Interrupt Request - UDC has been reset */
++	if (status & UDCSR_RSTIR) {
++		PRINTKD("%s: processing UDCSR_RSTIR\n", __FUNCTION__);
++		if (usbctl_next_state_on_event(kEvReset) != kError) {
++			/* starting 20ms or so reset sequence now... */
++			INFO (dev, "Resetting\n");
++			ep0_reset();  // just set state to idle
++			ep1_reset();  // flush dma, clear false stall
++			ep2_reset();  // flush dma, clear false stall
++		}
++		// mask reset ints, they flood during sequence, enable
++		// suspend and resume
++		UDC_set(Ser0UDCCR, UDCCR_REM);    // mask reset
++		UDC_clear(Ser0UDCCR, (UDCCR_SUSIM | UDCCR_RESIM)); // enable suspend and resume
++		UDC_flip(Ser0UDCSR, status);	// clear all pending sources
++		PRINTKD("%s: setting USB_FULL_SPEED\n",__FUNCTION__);
++		dev->gadget.speed = USB_SPEED_FULL;
++		return IRQ_HANDLED;	// NCB
++	}
++
++	/* else we have done something other than reset,
++	 * so be sure reset enabled
++	 */
++	UDC_clear(Ser0UDCCR, UDCCR_REM);
++
++	/* RESume Interrupt Request */
++	if (status & UDCSR_RESIR) {
++		struct usb_gadget_driver	*driver = dev->driver;
++
++		PRINTKD("%s: processing UDCSR_RESIR\n",__FUNCTION__);
++		if (driver->resume)
++			driver->resume (&dev->gadget);
++		core_kicker ();
++		enable_suspend_mask_resume ();
++	}
++
++	/* SUSpend Interrupt Request */
++	if (status & UDCSR_SUSIR) {
++		struct usb_gadget_driver	*driver = dev->driver;
++
++		PRINTKD("%s: processing UDCSR_SUSIR\n",__FUNCTION__);
++		if (driver->suspend)
++			driver->suspend (&dev->gadget);
++		enable_resume_mask_suspend ();
++	}
++
++	UDC_flip(Ser0UDCSR, status); // clear all pending sources
++
++	if (status & UDCSR_EIR)
++		PRINTKD("%s: processing ep0_int_hndlr\n",__FUNCTION__);
++		 ep0_int_hndlr();
++
++	if (status & UDCSR_RIR) {
++		PRINTKD("%s: processing ep1_int_hndlr\n",__FUNCTION__);
++		ep1_int_hndlr(status);
++	}
++	if (status & UDCSR_TIR) {
++		PRINTKD("%s: processing ep2_int_hndlr\n",__FUNCTION__);
++		ep2_int_hndlr(status);
++	}
++
++	return IRQ_HANDLED;	// NCB
++}
++
++/* soft_connect_hook ()
++ * Some devices have platform-specific circuitry to make USB
++ * not seem to be plugged in, even when it is. This allows
++ * software to control when a device 'appears' on the USB bus
++ * (after Linux has booted and this driver has loaded, for
++ * example). If you have such a circuit, control it here.
++ */
++#ifdef CONFIG_SA1100_EXTENEX1
++static void soft_connect_hook(int enable)
++{
++	if (machine_is_extenex1 ()) {
++		if (enable) {
++			PPDR |= PPC_USB_SOFT_CON;
++			PPSR |= PPC_USB_SOFT_CON;
++		} else {
++			PPSR &= ~PPC_USB_SOFT_CON;
++			PPDR &= ~PPC_USB_SOFT_CON;
++		}
++	}
++}
++#elif defined(CONFIG_SA1100_BALLOON)
++static void soft_connect_hook(int enable)
++{
++	if (machine_is_balloon()) {
++	    if (enable)
++			balloon_cpld_control(BALLOON_UDC_DISCONNECT, 0);
++	    else
++			balloon_cpld_control(BALLOON_UDC_DISCONNECT, 1);
++	}
++}
++#elif defined(CONFIG_SA1100_COLLIE)
++static int collie_usb_init(void)
++{
++        int rc;
++        rc = gpio_request(COLLIE_GPIO_LB_VOL_CHG, "usb enable");
++        if (rc)
++                return rc;
++
++        rc = gpio_direction_output(COLLIE_GPIO_LB_VOL_CHG, 1);
++        if (rc)
++                gpio_free(COLLIE_GPIO_LB_VOL_CHG);
++
++        return rc;
++}
++
++static void collie_set_usb(int enable)
++{
++        gpio_set_value(COLLIE_GPIO_LB_VOL_CHG, enable);
++}
++
++static void collie_usb_exit(void)
++{
++        gpio_free(COLLIE_GPIO_LB_VOL_CHG);
++}
++
++static void soft_connect_hook(int enable)
++{
++	collie_set_usb(enable);
++}
++#else
++#define soft_connect_hook(x) do { } while (0);
++#endif
++
++/* "function" sysfs attribute */
++static ssize_t
++show_function(struct device *_dev, struct device_attribute *attr, char *buf)
++{
++	struct sa1100_udc	*dev = dev_get_drvdata (_dev);
++
++	if (!dev->driver
++			|| !dev->driver->function
++			|| strlen(dev->driver->function) > PAGE_SIZE)
++		return 0;
++	return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
++}
++static DEVICE_ATTR(function, S_IRUGO, show_function, NULL);
++
++/* disable the UDC at the source */
++static void udc_disable(struct sa1100_udc *dev)
++{
++	soft_connect_hook(0);
++	UDC_set(Ser0UDCCR, UDCCR_UDD);
++	dev->gadget.speed = USB_SPEED_UNKNOWN;
++	ep0_idle(dev);
++}
++
++static void udc_reinit(struct sa1100_udc *dev)
++{
++	u32	i;
++
++	/* Initialize the gadget controller data structure */
++	INIT_LIST_HEAD(&dev->gadget.ep_list);
++	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
++	ep0_idle(dev);
++	for ( i = 0 ; i < 3 ; i++) {
++		struct sa1100_ep *ep = &dev->ep[i];
++		if (i != 0)
++			list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
++		ep->desc     = NULL;
++		ep->stopped  = 0;
++		INIT_LIST_HEAD(&ep->queue);
++	}
++}
++
++/*  enable the udc at the source */
++static void udc_enable(struct sa1100_udc *dev)
++{
++	UDC_clear (Ser0UDCCR, UDCCR_UDD);
++	ep0_idle(dev);
++}
++
++static void ep0_start(struct sa1100_udc *dev)
++{
++	udc_enable(dev);
++	udelay(100);
++
++	/* clear stall - receiver seems to start stalled? 19Jan01ww */
++	/* also clear other stuff just to be thurough 22Feb01ww */
++	UDC_clear(Ser0UDCCS1, UDCCS1_FST | UDCCS1_RPE | UDCCS1_RPC );
++	UDC_clear(Ser0UDCCS2, UDCCS2_FST | UDCCS2_TPE | UDCCS2_TPC );
++
++	/* mask everything */
++	Ser0UDCCR = 0xFC;
++
++	/* flush DMA and fire through some -EAGAINs */
++	ep1_init(dev->ep[1].dmaregs);
++	ep2_init(dev->ep[2].dmaregs);
++
++	/* enable any platform specific hardware */
++	soft_connect_hook(1);
++
++	/* clear all top-level sources */
++	Ser0UDCSR = UDCSR_RSTIR | UDCSR_RESIR | UDCSR_EIR |
++		         UDCSR_RIR | UDCSR_TIR | UDCSR_SUSIR ;
++
++	/* EXERIMENT - a short line in the spec says toggling this
++	 * bit diddles the internal state machine in the udc to
++	 * expect a suspend
++	 */
++	Ser0UDCCR  |= UDCCR_RESIM;
++	/* END EXPERIMENT 10Feb01ww */
++
++	/* enable any platform specific hardware */
++	soft_connect_hook(1);
++
++	/* Enable interrupts. If you are unplugged you will immediately
++	 * get a suspend interrupt. If you are plugged and have a soft
++	 * connect-circuit, you will get a reset.  If you are plugged
++	 * without a soft-connect, I think you also get suspend. In short,
++	 * start with suspend masked and everything else enabled
++	 */
++	UDC_write(Ser0UDCCR, UDCCR_SUSIM);
++}
++
++
++/* when a driver is successfully registered, it will receive
++ * control requests including set_configuration(), which enables
++ * non-control requests.  then usb traffic follows until a
++ * disconnect is reported.  then a host may connect again, or
++ * the driver might get unbound.
++ */
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++	struct sa1100_udc	*dev = the_controller;
++	int			retval;
++
++	if (!driver || !driver->bind || !driver->setup)
++		return -EINVAL;
++	if (!dev)
++		return -ENODEV;
++	if (dev->driver)
++		return -EBUSY;
++
++	/* hook up the driver ... */
++	dev->driver = driver;
++	dev->gadget.dev.driver = &driver->driver;
++
++	retval = device_add(&dev->gadget.dev);
++	if (retval != 0) {
++		printk(KERN_ERR "Error in device_add() : %d\n",retval);
++		goto register_error;
++	}
++
++	retval = driver->bind (&dev->gadget);
++	if (retval != 0) {
++		DEBUG(dev, "bind to driver %s --> %d\n",
++				driver->driver.name, retval);
++		device_del(&dev->gadget.dev);
++		goto register_error;
++	}
++
++	retval = device_create_file(dev->dev, &dev_attr_function);
++
++	/* ... then enable host detection and ep0; and we're ready
++	 * for set_configuration as well as eventual disconnect.
++	 */
++	ep0_start(dev);
++
++	DEBUG(dev, "%s ready\n", driver->driver.name);
++
++	return 0;
++
++register_error:
++	dev->driver = NULL;
++	dev->gadget.dev.driver = NULL;
++	return retval;
++}
++EXPORT_SYMBOL (usb_gadget_register_driver);
++
++static void
++stop_activity(struct sa1100_udc *dev, struct usb_gadget_driver *driver)
++{
++	int i;
++
++	/* don't disconnect if it's not connected */
++	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
++		driver = NULL;
++	dev->gadget.speed = USB_SPEED_UNKNOWN;
++
++	/* mask everything */
++	Ser0UDCCR = 0xFC;
++
++	/* stop hardware; prevent new request submissions;
++	 * and kill any outstanding requests.
++	 */
++	for (i = 0; i < 3; i++) {
++		struct sa1100_ep *ep = &dev->ep[i];
++		ep->stopped = 1;
++		nuke(ep, -ESHUTDOWN);
++	}
++	udc_disable (dev);
++
++	/* report disconnect; the driver is already quiesced */
++	if (driver)
++		driver->disconnect(&dev->gadget);
++
++	/* re-init driver-visible data structures */
++	udc_reinit(dev);
++}
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	struct sa1100_udc	*dev = the_controller;
++
++	if (!dev)
++		return -ENODEV;
++	if (!driver || driver != dev->driver)
++		return -EINVAL;
++
++	local_irq_disable();
++	stop_activity (dev, driver);
++	local_irq_enable();
++	if (driver->unbind)
++		driver->unbind(&dev->gadget);
++	dev->driver = 0;
++
++	device_del(&dev->gadget.dev);
++	device_remove_file(dev->dev, &dev_attr_function);
++
++	DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL (usb_gadget_unregister_driver);
++
++
++/*-------------------------------------------------------------------------*/
++
++/*-------------------------------------------------------------------------*/
++
++//////////////////////////////////////////////////////////////////////////////
++// Proc Filesystem Support
++//////////////////////////////////////////////////////////////////////////////
++
++#if CONFIG_PROC_FS
++
++#define SAY(fmt,args...)  p += sprintf (p, fmt, ## args)
++#define SAYV(num)         p += sprintf (p, num_fmt, "Value", num)
++#define SAYC(label,yn)    p += sprintf (p, yn_fmt, label, yn)
++#define SAYS(label,v)     p += sprintf (p, cnt_fmt, label, v)
++
++static int usbctl_read_proc (char *page, char **start, off_t off,
++			    int count, int *eof, void *data)
++{
++	 const char * num_fmt   = "%25.25s: %8.8lX\n";
++	 const char * cnt_fmt   = "%25.25s: %lu\n";
++	 const char * yn_fmt    = "%25.25s: %s\n";
++	 const char * yes       = "YES";
++	 const char * no        = "NO";
++	 unsigned long v;
++	 char * p = page;
++	 int len;
++
++ 	 SAY ("SA1100 USB Controller Core\n");
++
++	 SAYS ("ep0 bytes read", usbd_info.stats.ep0_bytes_read);
++	 SAYS ("ep0 bytes written", usbd_info.stats.ep0_bytes_written);
++	 SAYS ("ep0 FIFO read failures", usbd_info.stats.ep0_fifo_read_failures);
++	 SAYS ("ep0 FIFO write failures", usbd_info.stats.ep0_fifo_write_failures);
++
++	 SAY ("\n");
++
++	 v = Ser0UDCAR;
++	 SAY ("%25.25s: 0x%8.8lX - %ld\n", "Address Register", v, v);
++	 v = Ser0UDCIMP;
++	 SAY ("%25.25s: %ld (%8.8lX)\n", "IN  max packet size", v+1, v);
++	 v = Ser0UDCOMP;
++	 SAY ("%25.25s: %ld (%8.8lX)\n", "OUT max packet size", v+1, v);
++
++	 v = Ser0UDCCR;
++	 SAY ("\nUDC Mask Register\n");
++	 SAYV (v);
++	 SAYC ("UDC Active", (v & UDCCR_UDA) ? yes : no);
++	 SAYC ("Suspend interrupts masked", (v & UDCCR_SUSIM) ? yes : no);
++	 SAYC ("Resume interrupts masked", (v & UDCCR_RESIM) ? yes : no);
++	 SAYC ("Reset interrupts masked", (v & UDCCR_REM) ? yes : no);
++
++	 v = Ser0UDCSR;
++	 SAY ("\nUDC Interrupt Request Register\n");
++	 SAYV (v);
++	 SAYC ("Reset pending", (v & UDCSR_RSTIR) ? yes : no);
++	 SAYC ("Suspend pending", (v & UDCSR_SUSIR) ? yes : no);
++	 SAYC ("Resume pending", (v & UDCSR_RESIR) ? yes : no);
++	 SAYC ("ep0 pending", (v & UDCSR_EIR)   ? yes : no);
++	 SAYC ("receiver pending", (v & UDCSR_RIR)   ? yes : no);
++	 SAYC ("tramsitter pending", (v & UDCSR_TIR)   ? yes : no);
++
++#ifdef CONFIG_SA1100_EXTENEX1
++	 SAYC ("\nSoft connect", (PPSR & PPC_USB_SOFT_CON) ? "Visible" : "Hidden");
++#endif
++
++#if 1
++	 SAY ("\nDMA Tx registers\n");
++	 {
++	 dma_regs_t *r=the_controller->ep[2].dmaregs;
++	 SAY (" DDAR");
++	 SAYV(r->DDAR);
++	 SAY (" DCSR");
++	 SAYV(r->RdDCSR);
++	 SAY (" DBSA (address buf A) ");
++	 SAYV(r->DBSA);
++	 SAY (" DBTA (transfer count A) ");
++	 SAYV(r->DBTA);
++	 SAY (" DBSB (address buf B) ");
++	 SAYV(r->DBSB);
++	 SAY (" DBTB (transfer count B) ");
++	 SAYV(r->DBTB);
++
++	 }
++	 SAY ("\nDMA Rx registers\n");
++	 {
++	 dma_regs_t *r=the_controller->ep[1].dmaregs;
++	 SAY (" DDAR");
++	 SAYV(r->DDAR);
++	 SAY (" DCSR");
++	 SAYV(r->RdDCSR);
++	 SAY (" DBSA (address buf A) ");
++	 SAYV(r->DBSA);
++	 SAY (" DBTA (transfer count A) ");
++	 SAYV(r->DBTA);
++	 SAY (" DBSB (address buf B) ");
++	 SAYV(r->DBSB);
++	 SAY (" DBTB (transfer count B) ");
++	 SAYV(r->DBTB);
++
++	 }
++#endif
++#if 1
++	 v = Ser0UDCCS0;
++	 SAY ("\nUDC Endpoint Zero Status Register\n");
++	 SAYV (v);
++	 SAYC ("Out Packet Ready", (v & UDCCS0_OPR) ? yes : no);
++	 SAYC ("In Packet Ready", (v & UDCCS0_IPR) ? yes : no);
++	 SAYC ("Sent Stall", (v & UDCCS0_SST) ? yes : no);
++	 SAYC ("Force Stall", (v & UDCCS0_FST) ? yes : no);
++	 SAYC ("Data End", (v & UDCCS0_DE)  ? yes : no);
++	 SAYC ("Data Setup End", (v & UDCCS0_SE)  ? yes : no);
++	 SAYC ("Serviced (SO)", (v & UDCCS0_SO)  ? yes : no);
++
++	 v = Ser0UDCCS1;
++	 SAY ("\nUDC Receiver Status Register\n");
++	 SAYV (v);
++	 SAYC ("Receive Packet Complete", (v & UDCCS1_RPC) ? yes : no);
++	 SAYC ("Sent Stall", (v & UDCCS1_SST) ? yes : no);
++	 SAYC ("Force Stall", (v & UDCCS1_FST) ? yes : no);
++	 SAYC ("Receive Packet Error", (v & UDCCS1_RPE) ? yes : no);
++	 SAYC ("Receive FIFO not empty", (v & UDCCS1_RNE) ? yes : no);
++
++	 v = Ser0UDCCS2;
++	 SAY ("\nUDC Transmitter Status Register\n");
++	 SAYV (v);
++	 SAYC ("FIFO has < 8 of 16 chars", (v & UDCCS2_TFS) ? yes : no);
++	 SAYC ("Transmit Packet Complete", (v & UDCCS2_TPC) ? yes : no);
++	 SAYC ("Transmit FIFO underrun", (v & UDCCS2_TUR) ? yes : no);
++	 SAYC ("Transmit Packet Error", (v & UDCCS2_TPE) ? yes : no);
++	 SAYC ("Sent Stall", (v & UDCCS2_SST) ? yes : no);
++	 SAYC ("Force Stall", (v & UDCCS2_FST) ? yes : no);
++#endif
++
++	 len = (p - page) - off;
++	 if (len < 0)
++		  len = 0;
++	 *eof = (len <=count) ? 1 : 0;
++	 *start = page + off;
++	 return len;
++}
++
++static inline void register_proc_entry (void)
++{
++	create_proc_read_entry (driver_name, 0, NULL,
++		usbctl_read_proc, NULL);
++}
++
++static inline void unregister_proc_entry (void)
++{
++	remove_proc_entry (driver_name, NULL);
++}
++
++#else
++
++#define register_proc_entry() do {} while (0)
++#define unregister_proc_entry() do {} while (0)
++
++#endif  /* CONFIG_PROC_FS */
++
++/*-------------------------------------------------------------------------*/
++
++MODULE_DESCRIPTION ("sa1100_udc");
++MODULE_AUTHOR ("Various");
++MODULE_LICENSE ("GPL");
++
++static struct sa1100_udc memory = {
++	.gadget = {
++		.ops		= &sa1100_ops,
++		.ep0		= &memory.ep[0].ep,
++		.name		= driver_name,
++		.dev = {
++			.init_name	= "gadget",
++		},
++	},
++
++	/* control endpoint */
++	.ep[0] = {
++		.ep = {
++			.name		= ep0name,
++			.ops		= &sa1100_ep_ops,
++			.maxpacket	= EP0_FIFO_SIZE,
++		},
++		.dev		= &memory,
++	},
++
++	/* first group of endpoints */
++	.ep[1] = {
++		.ep = {
++			.name		= "ep1out-bulk",
++			.ops		= &sa1100_ep_ops,
++			.maxpacket	= BULK_FIFO_SIZE,
++		},
++		.dev		= &memory,
++	},
++	.ep[2] = {
++		.ep = {
++			.name		= "ep2in-bulk",
++			.ops		= &sa1100_ep_ops,
++			.maxpacket	= BULK_FIFO_SIZE,
++		},
++		.dev		= &memory,
++	}
++};
++
++static int __init sa1100_udc_probe(struct device *_dev)
++{
++	struct sa1100_udc *dev = &memory;
++	int retval = 0;
++
++	/* setup dev */
++	dev->dev = _dev;
++//	dev->mach = _dev->platform_data;
++
++	device_initialize(&dev->gadget.dev);
++	dev->gadget.dev.parent = _dev;
++	dev->gadget.dev.dma_mask = _dev->dma_mask;
++
++	the_controller = dev;
++	dev_set_drvdata(_dev, dev);
++
++	/* controller stays disabled until gadget driver is bound */
++	udc_disable(dev);
++	udc_reinit(dev);
++
++//	spin_lock_init(&the_udc.lock);
++	register_proc_entry();
++
++#if defined(CONFIG_SA1100_COLLIE)
++	collie_usb_init();
++#endif	
++
++	/* setup dma channels and IRQ */
++	retval = sa1100_request_dma(DMA_Ser0UDCRd, "USB receive",
++				    NULL, NULL, &dev->ep[1].dmaregs);
++	if (retval) {
++		ERROR(dev, "couldn't get rx dma, err %d\n", retval);
++		goto err_rx_dma;
++	}
++	retval = sa1100_request_dma(DMA_Ser0UDCWr, "USB transmit",
++				    NULL, NULL, &dev->ep[2].dmaregs);
++	if (retval) {
++		ERROR(dev, "couldn't get tx dma, err %d\n", retval);
++		goto err_tx_dma;
++	}
++	retval = request_irq(IRQ_Ser0UDC, udc_int_hndlr, IRQF_DISABLED,
++			driver_name, dev);
++	if (retval) {
++		ERROR(dev, "couldn't get irq, err %d\n", retval);
++		goto err_irq;
++	}
++
++	INFO(dev, "initialized, rx %p tx %p irq %d\n",
++		dev->ep[1].dmaregs, dev->ep[2].dmaregs, IRQ_Ser0UDC);
++	return 0;
++
++err_irq:
++	sa1100_free_dma(dev->ep[2].dmaregs);
++	usbd_info.dmaregs_rx = 0;
++err_tx_dma:
++	sa1100_free_dma(dev->ep[1].dmaregs);
++	usbd_info.dmaregs_tx = 0;
++err_rx_dma:
++	return retval;
++}
++
++static int __exit sa1100_udc_remove(struct device *_dev)
++{
++	struct sa1100_udc *dev = dev_get_drvdata(_dev);
++
++	udc_disable(dev);
++	unregister_proc_entry();
++	usb_gadget_unregister_driver(dev->driver);
++	sa1100_free_dma(dev->ep[1].dmaregs);
++	sa1100_free_dma(dev->ep[2].dmaregs);
++	free_irq(IRQ_Ser0UDC, dev);
++	dev_set_drvdata(_dev,NULL);
++	the_controller = NULL;
++#if defined(CONFIG_SA1100_COLLIE)
++	collie_usb_exit();
++#endif	
++	return 0;
++}
++
++static struct device_driver udc_driver = {
++	.name		= "sa11x0-udc",
++	.bus		= &platform_bus_type,
++	.probe		= sa1100_udc_probe,
++	.remove		= __exit_p(sa1100_udc_remove),
++//	.suspend	= sa1100_udc_suspend,
++//	.resume		= sa1100_udc_resume,
++	.owner		= THIS_MODULE,
++};
++
++static int __init udc_init(void)
++{
++	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
++#ifdef NCB_DMA_FIX
++	send_buffer = (char*) kzalloc(SEND_BUFFER_SIZE, GFP_KERNEL | GFP_DMA );
++	receive_buffer = (char*) kzalloc(RECEIVE_BUFFER_SIZE, GFP_KERNEL | GFP_DMA );
++#endif
++	return driver_register(&udc_driver);
++}
++module_init(udc_init);
++
++static void __exit udc_exit(void)
++{
++#ifdef NCB_DMA_FIX
++	if (send_buffer) {
++	    kfree(send_buffer);
++	    send_buffer = NULL;
++	}
++	if (receive_buffer) {
++	    kfree(receive_buffer);
++	    receive_buffer = NULL;
++	}
++#endif
++	driver_unregister(&udc_driver);
++}
++module_exit(udc_exit);
+diff --git a/drivers/usb/gadget/sa1100_udc.h b/drivers/usb/gadget/sa1100_udc.h
+new file mode 100644
+index 0000000..86fa28d
+--- /dev/null
++++ b/drivers/usb/gadget/sa1100_udc.h
+@@ -0,0 +1,94 @@
++/*
++ * internals of "new style" UDC controller
++ * <linux/usb_gadget.h> replaces ARM-specific "sa1100_usb.h".
++ */
++
++struct sa1100_ep {
++	struct usb_ep				ep;
++	struct sa1100_udc			*dev;
++	//unsigned long				irqs;
++
++	const struct usb_endpoint_descriptor	*desc;
++	struct list_head			queue;
++	dma_regs_t 				*dmaregs;
++	unsigned 				stopped : 1;
++};
++
++struct sa1100_request {
++	struct usb_request			req;
++	struct list_head			queue;
++// NCB	unsigned				mapped : 1;
++};
++
++enum ep0_state {
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_END_XFER,
++	EP0_STALL,
++};
++
++#define EP0_FIFO_SIZE	((unsigned)8)
++#define BULK_FIFO_SIZE	((unsigned)64)
++//#define ISO_FIFO_SIZE	((unsigned)256)
++//#define INT_FIFO_SIZE	((unsigned)8)
++
++struct udc_stats {
++	struct ep0stats {
++		unsigned long		ops;
++		unsigned long		bytes;
++	} read, write;
++	unsigned long			irqs;
++};
++
++struct sa1100_udc {
++	struct usb_gadget			gadget;
++	struct usb_gadget_driver 		*driver;
++	struct device				*dev;
++	enum ep0_state				ep0state;
++	struct udc_stats			stats;
++// NCB	spinlock_t				lock;
++// NCB	dma_regs_t 				*dmaregs_tx, *dmaregs_rx;
++	unsigned				got_irq : 1,
++						vbus : 1,
++						pullup : 1,
++						has_cfr : 1,
++						req_pending : 1,
++						req_std : 1,
++						req_config : 1;
++	struct timer_list			timer;
++	u64 dma_mask;
++	unsigned char				address;
++	struct sa1100_ep			ep[3];
++	int					ep0_req_len;
++};
++
++/*-------------------------------------------------------------------------*/
++
++#define xprintk(dev,level,fmt,args...) \
++	printk(level "%s: " fmt , driver_name , ## args)
++
++#ifdef DEBUG
++#undef DEBUG
++#define DEBUG(dev,fmt,args...) \
++	xprintk(dev , KERN_DEBUG , fmt , ## args)
++#else
++#define DEBUG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* DEBUG */
++
++#ifdef VERBOSE
++#define VDEBUG DEBUG
++#else
++#define VDEBUG(dev,fmt,args...) \
++	do { } while (0)
++#endif	/* VERBOSE */
++
++#define ERROR(dev,fmt,args...) \
++	xprintk(dev , KERN_ERR , fmt , ## args)
++#define WARN_(dev,fmt,args...) \
++	xprintk(dev , KERN_WARNING , fmt , ## args)
++#define INFO(dev,fmt,args...) \
++	xprintk(dev , KERN_INFO , fmt , ## args)

++
++/*-------------------------------------------------------------------------*/
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/0015-ucb1x00-sound-hack-collie-specific.patch b/recipes/linux/linux-2.6.31/collie/0015-ucb1x00-sound-hack-collie-specific.patch
new file mode 100644
index 0000000000..29ad090e63
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/0015-ucb1x00-sound-hack-collie-specific.patch
@@ -0,0 +1,899 @@
+From 7e2cf8ebfd553d025184aef2c0574119e95e84a4 Mon Sep 17 00:00:00 2001
+From: Thomas Kunze <thommycheck@gmx.de>
+Date: Sat, 10 Oct 2009 21:05:21 +0200
+Subject: [PATCH 15/15] ucb1x00 sound hack (collie specific)
+
+---
+ sound/arm/Kconfig          |   10 +
+ sound/arm/Makefile         |    3 +
+ sound/arm/sa11xx-ucb1x00.c |  843 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 856 insertions(+), 0 deletions(-)
+ create mode 100644 sound/arm/sa11xx-ucb1x00.c
+
+diff --git a/sound/arm/Kconfig b/sound/arm/Kconfig
+index 885683a..068962e 100644
+--- a/sound/arm/Kconfig
++++ b/sound/arm/Kconfig
+@@ -11,6 +11,16 @@ menuconfig SND_ARM
+ 
+ if SND_ARM
+ 
++config SND_SA11XX_UCB1X00
++    tristate "SA11xx UCB1x00 driver (Simpad)"
++    depends on ARCH_SA1100 && SND
++    select SND_PCM
++    help
++      Say Y here if you have a Simpad handheld computer
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called snd-sa11xx-ucb1x00.
++
+ config SND_ARMAACI
+ 	tristate "ARM PrimeCell PL041 AC Link support"
+ 	depends on ARM_AMBA
+diff --git a/sound/arm/Makefile b/sound/arm/Makefile
+index 5a549ed..48a25d0 100644
+--- a/sound/arm/Makefile
++++ b/sound/arm/Makefile
+@@ -2,6 +2,9 @@
+ # Makefile for ALSA
+ #
+ 
++obj-$(CONFIG_SND_SA11XX_UCB1X00) += snd-sa11xx-ucb1x00.o
++snd-sa11xx-ucb1x00-objs		:= sa11xx-ucb1x00.o
++
+ obj-$(CONFIG_SND_ARMAACI)	+= snd-aaci.o
+ snd-aaci-objs			:= aaci.o devdma.o
+ 
+diff --git a/sound/arm/sa11xx-ucb1x00.c b/sound/arm/sa11xx-ucb1x00.c
+new file mode 100644
+index 0000000..e93e7d8
+--- /dev/null
++++ b/sound/arm/sa11xx-ucb1x00.c
+@@ -0,0 +1,843 @@
++/*
++ *  Driver for Philips UCB1300 on Siemens Simpad
++ *  Copyright (C) 2008 Thomas Schätzlein <thomas@pnxs.de>
++ *
++ *   This program is free software; you can redistribute it and/or modify
++ *   it under the terms of the GNU General Public License.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/errno.h>
++#include <linux/ioctl.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++
++#ifdef CONFIG_PM
++#include <linux/pm.h>
++#endif
++
++#include <asm/dma.h>
++
++#include <sound/core.h>
++#include <sound/control.h>
++#include <sound/pcm.h>
++#include <sound/initval.h>
++#include <sound/info.h>
++
++#include <linux/mfd/ucb1x00.h>
++
++#undef DEBUG_MODE
++#undef DEBUG_FUNCTION_NAMES
++
++#define AUDIO_RATE_DEFAULT  44100
++
++/* extra register defines for collieis tc35143af */
++#define UCB_AC_A_MIC2_SEL	(1 << 15)
++#define UCB_AC_A_OUT2_ENA	(1 << 14)
++#define UCB_AC_B_IN_MUTE	(1 << 13)
++#define UCB_AC_B_OUT_MUTE	(1 << 5)
++
++
++
++MODULE_AUTHOR("Thomas Schätzlein <thomas@pnxs.de>");
++MODULE_LICENSE("GPL");
++MODULE_DESCRIPTION("SA1100/SA1111 + UCB1300 driver for ALSA");
++MODULE_SUPPORTED_DEVICE("{{UCB1x00,Simpad}}");
++
++static char *id;	/* ID for this card */
++
++module_param(id, charp, 0444);
++MODULE_PARM_DESC(id, "ID string for SA1100/SA1111 + UCB1x00 soundcard.");
++
++struct audio_stream {
++	char *id;		/* identification string */
++	int stream_id;		/* numeric identification */	
++	dma_device_t dma_dev;	/* device identifier for DMA */
++	dma_regs_t *dma_regs;	/* points to our DMA registers */
++	unsigned int active:1;	/* we are using this stream for transfer now */
++	int period;		/* current transfer period */
++	int periods;		/* current count of periods registerd in the DMA engine */
++	unsigned int old_offset;
++	spinlock_t dma_lock;	/* for locking in DMA operations (see dma-sa1100.c in the kernel) */
++	struct snd_pcm_substream *stream;
++};
++
++struct sa11xx_ucb1x00 {
++	struct snd_card*    card;
++	struct snd_pcm*     pcm;
++    struct ucb1x00_dev* ucb1x00;
++    struct device*      pdev;
++	long                samplerate;
++	struct audio_stream s[2];	/* playback & capture */
++};
++
++#if 0
++static unsigned int rates[] = {
++	8000,  10666, 10985, 14647,
++	16000, 21970, 22050, 24000,
++	29400, 32000, 44100, 48000,
++};
++
++static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
++	.count	= ARRAY_SIZE(rates),
++	.list	= rates,
++	.mask	= 0,
++};
++#endif
++
++#define UCB1x00_SINGLE(xname, where, reg, shift, mask, invert) \
++{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .info = snd_ucb1x00_info_single, \
++  .get = snd_ucb1x00_get_single, .put = snd_ucb1x00_put_single, \
++  .private_value = where | (reg << 5) | (shift << 9) | (mask << 13) | (invert << 19) \
++}
++
++#define UCB1x00_SINGLE_WHERE(value) (value & 31)
++#define UCB1x00_SINGLE_REG(value) ((value >> 5) & 15)
++#define UCB1x00_SINGLE_SHIFT(value) ((value >> 9) & 15)
++#define UCB1x00_SINGLE_MASK(value) ((value >> 13) & 63)
++#define UCB1x00_SINGLE_INV(value) ((value >> 19) & 1)
++
++static int snd_ucb1x00_info_single(struct snd_kcontrol *kcontrol,
++				   struct snd_ctl_elem_info *uinfo)
++{
++	int mask = UCB1x00_SINGLE_MASK(kcontrol->private_value);
++
++//    printk(KERN_INFO "snd_ucb1x00_info_single called\n");
++
++	uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : SNDRV_CTL_ELEM_TYPE_INTEGER;
++	uinfo->count = 1;
++	uinfo->value.integer.min = 0;
++	uinfo->value.integer.max = mask;
++	return 0;
++}
++
++static int snd_ucb1x00_get_single(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_value *ucontrol)
++{
++    struct sa11xx_ucb1x00* chip = snd_kcontrol_chip(kcontrol);
++    struct ucb1x00 *ucb = chip->ucb1x00->ucb;
++    unsigned int retval;
++
++    int reg   = UCB1x00_SINGLE_REG(kcontrol->private_value);
++    int shift = UCB1x00_SINGLE_SHIFT(kcontrol->private_value);
++	int mask  = UCB1x00_SINGLE_MASK(kcontrol->private_value);
++	int invert= UCB1x00_SINGLE_INV(kcontrol->private_value);
++    
++//    printk(KERN_INFO "snd_ucb1x00_get_single called\n");
++
++    retval = (ucb1x00_reg_read(ucb, reg) >> shift) & mask;
++    
++//    printk(KERN_INFO "ucb1x00_reg_read reg=%02X value=%08X\n", reg, retval);
++
++	ucontrol->value.integer.value[0] = retval;
++	if (invert) {
++		ucontrol->value.integer.value[0] = mask - ucontrol->value.integer.value[0];
++    }
++
++	return 0;
++}
++
++static int snd_ucb1x00_put_single(struct snd_kcontrol *kcontrol,
++				  struct snd_ctl_elem_value *ucontrol)
++{
++    struct sa11xx_ucb1x00* chip = snd_kcontrol_chip(kcontrol);
++    struct ucb1x00 *ucb = chip->ucb1x00->ucb;
++    int reg   = UCB1x00_SINGLE_REG(kcontrol->private_value);
++    int shift = UCB1x00_SINGLE_SHIFT(kcontrol->private_value);
++	int mask  = UCB1x00_SINGLE_MASK(kcontrol->private_value);
++	int invert= UCB1x00_SINGLE_INV(kcontrol->private_value);
++	unsigned short val;
++    unsigned int regval;
++
++	val = (ucontrol->value.integer.value[0] & mask);
++	if (invert)
++		val = mask - val;
++
++//    printk(KERN_INFO "snd_ucb1x00_put_single called val=%d\n", val);
++
++    regval = ucb1x00_reg_read(ucb, reg);
++    regval &= ~(mask << shift);
++    regval |= val << shift;
++//    printk(KERN_INFO "snd_ucb1x00_put_single write regval=%08X to reg %d\n", regval, reg);
++    ucb1x00_reg_write(ucb, reg, regval);
++    return 0;
++}
++
++enum ucb1x00_config {
++    CMD_OMUTE = 0, 
++	CMD_VOLUME,
++    CMD_IGAIN,
++    CMD_IMUTE,
++    CMD_LOOPBACK,
++    CMD_CLIP,
++    CMD_OENA,
++};
++
++static struct snd_kcontrol_new snd_ucb1x00_controls[] = {
++	UCB1x00_SINGLE("Master Playback Switch", CMD_OMUTE, UCB_AC_B, 5, 0x01, 1),
++	UCB1x00_SINGLE("Master Playback Volume", CMD_VOLUME, UCB_AC_B, 0, 0x1F, 1),
++
++	UCB1x00_SINGLE("Input Gain", CMD_IGAIN, UCB_AC_A, 7, 0x3F, 1),
++	UCB1x00_SINGLE("Input Mute", CMD_IMUTE, UCB_AC_B, 13, 1, 0),
++	UCB1x00_SINGLE("Output Mute", CMD_OMUTE, UCB_AC_B, 5, 1, 0),
++
++	UCB1x00_SINGLE("Audio Loopback", CMD_LOOPBACK, UCB_AC_B, 8, 1, 0),
++};
++
++static void sa11xx_ucb1x00_set_samplerate(struct sa11xx_ucb1x00 *sa11xx_ucb1x00, long rate)
++{
++    struct ucb1x00 *ucb = sa11xx_ucb1x00->ucb1x00->ucb;
++    unsigned int div_rate = ucb1x00_clkrate(ucb) / 32;
++    unsigned int div;
++    unsigned int reg;
++
++//    printk(KERN_INFO "sa11xx_ucb1x00_set_samplerate called rate=%d div_rate=%d\n", rate, div_rate);
++
++    div = (div_rate + (rate / 2)) / rate;
++    if (div < 6) {
++        div = 6;
++    }
++    if (div > 127) {
++        div = 127;
++    }
++/*
++    printk(KERN_INFO "ucb=%08X\n", ucb);
++    printk(KERN_INFO "ucb1x00_set_audio_divisor(%d)\n", div*32);
++    printk(KERN_INFO "ucb1x00_reg_write(reg=%d, div=%d)\n", UCB_AC_A, div);
++*/    
++    reg = ucb1x00_reg_read(ucb, UCB_AC_B);
++    reg &= ~(UCB_AC_B_IN_ENA);
++    ucb1x00_reg_write(ucb, UCB_AC_B, reg);
++    
++    reg = ucb1x00_reg_read(ucb, UCB_AC_A);
++    reg &= ~(UCB_AC_A_OUT2_ENA);
++    ucb1x00_reg_write(ucb, UCB_AC_A, reg);
++
++    ucb1x00_set_audio_divisor(ucb, div*32); /* set divisor in MCP */
++
++    reg = ucb1x00_reg_read(ucb, UCB_AC_A);
++    reg &= ~(0x1F);
++    reg |= div;
++    ucb1x00_reg_write(ucb, UCB_AC_A, reg); /* set divisor in UCB1x00 */
++    
++    reg = ucb1x00_reg_read(ucb, UCB_AC_B);
++    reg |= UCB_AC_B_IN_ENA;
++    ucb1x00_reg_write(ucb, UCB_AC_B, reg);
++    
++    reg = ucb1x00_reg_read(ucb, UCB_AC_A);
++    reg |= UCB_AC_A_OUT2_ENA;
++    ucb1x00_reg_write(ucb, UCB_AC_A, reg);
++
++	sa11xx_ucb1x00->samplerate = div_rate / div;
++
++//    printk(KERN_INFO "sa11xx_ucb1x00_set_samplerate done\n");
++}
++
++/* HW init and shutdown */
++static void sa11xx_ucb1x00_audio_init(struct sa11xx_ucb1x00 *sa11xx_ucb1x00)
++{
++	//unsigned long flags;
++
++	/* Setup DMA stuff */
++	sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_PLAYBACK].id = "UCB1x00 out";
++	sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_PLAYBACK].stream_id = SNDRV_PCM_STREAM_PLAYBACK;
++	sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_PLAYBACK].dma_dev = sa11xx_ucb1x00->ucb1x00->ucb->mcp->dma_audio_wr;
++
++	sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_CAPTURE].id = "UCB1x00 in";
++	sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_CAPTURE].stream_id = SNDRV_PCM_STREAM_CAPTURE;
++	sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_CAPTURE].dma_dev = sa11xx_ucb1x00->ucb1x00->ucb->mcp->dma_audio_rd;
++}
++
++#if 0
++static void sa11xx_ucb1x00_audio_shutdown(struct sa11xx_ucb1x00 *sa11xx_ucb1x00)
++{
++	/* mute on */
++//	set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
++	
++	/* disable the audio power and all signals leading to the audio chip */
++//	l3_close(sa11xx_uda1341->uda1341);
++//	Ser4SSCR0 = 0;
++//	clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET);
++
++	/* power off and mute off */
++	/* FIXME - is muting off necesary??? */
++
++//	clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON);
++//	clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
++}
++#endif
++
++/* DMA stuff */
++
++/*
++ * these are the address and sizes used to fill the xmit buffer
++ * so we can get a clock in record only mode
++ */
++//#define FORCE_CLOCK_ADDR		(dma_addr_t)FLUSH_BASE_PHYS
++//#define FORCE_CLOCK_SIZE		4096 // was 2048
++
++// FIXME Why this value exactly - wrote comment
++#define DMA_BUF_SIZE	8176	/* <= MAX_DMA_SIZE from asm/arch-sa1100/dma.h */
++
++static int audio_dma_request(struct audio_stream *s, void (*callback)(void *))
++{
++	int ret;
++
++//    printk(KERN_INFO "audio_dma_request stream=%08X\n", s);
++
++	ret = sa1100_request_dma(s->dma_dev, s->id, callback, s, &s->dma_regs);
++	if (ret < 0)
++		printk(KERN_ERR "unable to grab audio dma 0x%x\n", s->dma_dev);
++	return ret;
++}
++
++static void audio_dma_free(struct audio_stream *s)
++{
++//    printk(KERN_INFO "audio_dma_free stream=%08X\n", s);
++	sa1100_free_dma(s->dma_regs);
++	s->dma_regs = 0;
++}
++
++static u_int audio_get_dma_pos(struct audio_stream *s)
++{
++	struct snd_pcm_substream *substream = s->stream;
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	unsigned int offset;
++	unsigned long flags;
++	dma_addr_t addr;
++	
++	// this must be called w/ interrupts locked out see dma-sa1100.c in the kernel
++	spin_lock_irqsave(&s->dma_lock, flags);
++	addr = sa1100_get_dma_pos((s)->dma_regs);
++	offset = addr - runtime->dma_addr;
++	spin_unlock_irqrestore(&s->dma_lock, flags);
++
++//    printk(KERN_INFO "audio_get_dma_pos real_offset=%d\n", offset);
++	
++	offset = bytes_to_frames(runtime,offset);
++	if (offset >= runtime->buffer_size)
++		offset = 0;
++
++//    printk(KERN_INFO "audio_get_dma_pos stream=%08X pos=%d\n", s, offset);
++
++	return offset;
++}
++
++/*
++ * this stops the dma and clears the dma ptrs
++ */
++static void audio_stop_dma(struct audio_stream *s)
++{
++	unsigned long flags;
++
++	spin_lock_irqsave(&s->dma_lock, flags);	
++	s->active = 0;
++	s->period = 0;
++	/* this stops the dma channel and clears the buffer ptrs */
++	sa1100_clear_dma(s->dma_regs);	
++	spin_unlock_irqrestore(&s->dma_lock, flags);
++}
++
++static void audio_process_dma(struct audio_stream *s)
++{
++	struct snd_pcm_substream *substream = s->stream;
++	struct snd_pcm_runtime *runtime;
++	unsigned int dma_size;		
++	unsigned int offset;
++	int ret;
++
++//    printk(KERN_ERR "audio_process_dma called periods=%d period=%d\n", s->periods, s->period);
++                
++	/* must be set here - only valid for running streams, not for forced_clock dma fills  */
++	runtime = substream->runtime;
++	while (s->active && s->periods < runtime->periods) {
++		dma_size = frames_to_bytes(runtime, runtime->period_size);
++		if (s->old_offset) {
++			/* a little trick, we need resume from old position */
++			offset = frames_to_bytes(runtime, s->old_offset - 1);
++			s->old_offset = 0;
++			s->periods = 0;
++			s->period = offset / dma_size;
++			offset %= dma_size;
++			dma_size = dma_size - offset;
++			if (!dma_size)
++				continue;		/* special case */
++		} else {
++			offset = dma_size * s->period;
++			snd_BUG_ON(dma_size > DMA_BUF_SIZE);
++		}
++//        printk(KERN_INFO "start addr=%08X size=%d\n", runtime->dma_addr + offset, dma_size); 
++		ret = sa1100_start_dma((s)->dma_regs, runtime->dma_addr + offset, dma_size);
++		if (ret) {
++//			printk(KERN_ERR "audio_process_dma: cannot queue DMA buffer (%i)\n", ret);
++			return;
++		}
++
++		s->period++;
++		s->period %= runtime->periods;
++		s->periods++;
++	}
++}
++
++static void audio_dma_callback(void *data)
++{
++	struct audio_stream *s = data;
++
++//    printk(KERN_INFO "audio_dma_callback called stream=%08X\n", s);
++        
++	/* 
++	 * If we are getting a callback for an active stream then we inform
++	 * the PCM middle layer we've finished a period
++	 */
++ 	if (s->active) {
++//        printk(KERN_INFO "audio_dma_callback period elapsed\n");
++		snd_pcm_period_elapsed(s->stream);
++    }
++
++	spin_lock(&s->dma_lock);
++    if (s->periods > 0) {
++        s->periods--;
++    }
++	audio_process_dma(s);
++	spin_unlock(&s->dma_lock);
++}
++
++static void sa11xx_ucb1x00_enable_audio(struct ucb1x00* ucb) 
++{
++    uint32_t reg;
++    reg = ucb1x00_reg_read(ucb, UCB_AC_A);
++    reg |= UCB_AC_A_OUT2_ENA;
++    ucb1x00_reg_write(ucb, UCB_AC_A, reg);
++}
++
++static void sa11xx_ucb1x00_disable_audio(struct ucb1x00* ucb) 
++{
++    uint32_t reg;
++    reg = ucb1x00_reg_read(ucb, UCB_AC_A);
++    reg &= ~(UCB_AC_A_OUT2_ENA);
++    ucb1x00_reg_write(ucb, UCB_AC_A, reg);
++}
++
++/* PCM setting */
++
++/* trigger & timer */
++static int snd_sa11xx_ucb1x00_trigger(struct snd_pcm_substream *substream, int cmd)
++{
++    struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++    int stream_id = substream->pstr->stream;
++    struct audio_stream *s = &chip->s[stream_id];
++    int err = 0;
++
++//    printk(KERN_INFO "snd_sa11xx_ucb1x00_trigger called\n");
++
++    /* note local interrupts are already disabled in the midlevel code */
++    spin_lock(&s->dma_lock);
++    switch (cmd) {
++        case SNDRV_PCM_TRIGGER_START:
++            /* requested stream startup */
++            s->active = 1;
++            sa11xx_ucb1x00_enable_audio(chip->ucb1x00->ucb);
++            audio_process_dma(s);
++            break;
++        case SNDRV_PCM_TRIGGER_STOP:
++            /* requested stream shutdown */
++            sa11xx_ucb1x00_disable_audio(chip->ucb1x00->ucb);
++            audio_stop_dma(s);
++            break;
++        case SNDRV_PCM_TRIGGER_SUSPEND:
++            s->active = 0;
++            sa1100_stop_dma(s->dma_regs);
++            s->old_offset = audio_get_dma_pos(s) + 1;
++#ifdef HH_VERSION		
++            sa1100_dma_flush_all(s->dma_regs);
++#else
++            //FIXME - DMA API
++#endif		
++            s->periods = 0;
++            break;
++        case SNDRV_PCM_TRIGGER_RESUME:
++            s->active = 1;
++            audio_process_dma(s);
++            break;
++        case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
++            sa1100_stop_dma(s->dma_regs);
++            s->active = 0;
++        case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
++            s->active = 1;
++            if (s->old_offset) {
++                audio_process_dma(s);
++                break;
++            }
++            sa1100_resume_dma(s->dma_regs);
++            break;
++        default:
++            err = -EINVAL;
++            break;
++    }
++    spin_unlock(&s->dma_lock);	
++    return err;
++}
++
++static int snd_sa11xx_ucb1x00_prepare(struct snd_pcm_substream *substream)
++{
++	struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	struct audio_stream *s = &chip->s[substream->pstr->stream];
++
++//    printk(KERN_INFO "snd_sa11xx_ucb1x00_prepare called\n");
++        
++	/* set requested samplerate */
++	sa11xx_ucb1x00_set_samplerate(chip, runtime->rate);
++
++	s->period = 0;
++	s->periods = 0;
++        
++	return 0;
++}
++
++static snd_pcm_uframes_t snd_sa11xx_ucb1x00_pointer(struct snd_pcm_substream *substream)
++{
++	struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++//    printk(KERN_INFO "snd_sa11xx_ucb1x00_pointer called\n");
++	return audio_get_dma_pos(&chip->s[substream->pstr->stream]);
++}
++
++static struct snd_pcm_hardware snd_sa11xx_ucb1x00_hw =
++{
++	.info			= (SNDRV_PCM_INFO_INTERLEAVED |
++				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
++				   SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
++				   SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
++	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
++/*	.rates			= (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
++				   SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |\
++				   SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
++				   SNDRV_PCM_RATE_KNOT),*/
++	.rate_min		= 5000,
++	.rate_max		= 48000,
++	.channels_min		= 1,
++	.channels_max		= 1,
++	.buffer_bytes_max	= 64*1024,
++	.period_bytes_min	= 4096,
++	.period_bytes_max	= DMA_BUF_SIZE,
++	.periods_min		= 2,
++	.periods_max		= 255,
++	.fifo_size		= 0,
++};
++
++#if 0
++static struct snd_pcm_hardware snd_sa11xx_ucb1x00_playback =
++{
++	.info			= (SNDRV_PCM_INFO_INTERLEAVED |
++				   SNDRV_PCM_INFO_BLOCK_TRANSFER |
++				   SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
++				   SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
++	.formats		= SNDRV_PCM_FMTBIT_S16_LE,
++	.rates			= (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
++                                   SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |\
++				   SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
++				   SNDRV_PCM_RATE_KNOT),
++	.rate_min		= 8000,
++	.rate_max		= 48000,
++	.channels_min		= 2,
++	.channels_max		= 2,
++	.buffer_bytes_max	= 64*1024,
++	.period_bytes_min	= 128,
++	.period_bytes_max	= DMA_BUF_SIZE,
++	.periods_min		= 2,
++	.periods_max		= 8,
++	.fifo_size		= 0,
++};
++#endif
++
++static int snd_card_sa11xx_ucb1x00_open(struct snd_pcm_substream *substream)
++{
++	struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++	struct snd_pcm_runtime *runtime = substream->runtime;
++	int stream_id = substream->pstr->stream;
++	//int err;
++
++	chip->s[stream_id].stream = substream;
++
++//    printk(KERN_INFO "snd_card_sa11xx_ucb1x00_open called substream=%08X\n", substream);
++
++    runtime->hw = snd_sa11xx_ucb1x00_hw;
++	if (stream_id == SNDRV_PCM_STREAM_PLAYBACK) {
++    }
++	else {
++    }
++/*
++	if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0) {
++		return err;
++    }
++*/
++/*	if ((err = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates)) < 0) {
++		return err;
++    }
++*/
++	return 0;
++}
++
++static int snd_card_sa11xx_ucb1x00_close(struct snd_pcm_substream *substream)
++{
++	struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++
++	chip->s[substream->pstr->stream].stream = NULL;
++//    printk(KERN_INFO "snd_card_sa11xx_ucb1x00_close called substream=%08X\n", substream);
++	return 0;
++}
++
++/* HW params & free */
++
++static int snd_sa11xx_ucb1x00_hw_params(struct snd_pcm_substream *substream,
++					struct snd_pcm_hw_params *hw_params)
++{
++//	struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++//    struct ucb1x00* ucb = chip->ucb1x00->ucb;
++//    printk(KERN_INFO "snd_sa11xx_ucb1x00_hw_params called substream=%08X\n", substream);
++
++        
++	return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
++}
++
++static int snd_sa11xx_ucb1x00_hw_free(struct snd_pcm_substream *substream)
++{
++//	struct sa11xx_ucb1x00 *chip = snd_pcm_substream_chip(substream);
++//    struct ucb1x00* ucb = chip->ucb1x00->ucb;
++//    printk(KERN_INFO "snd_sa11xx_ucb1x00_hw_free called substream=%08X\n", substream);
++
++	return snd_pcm_lib_free_pages(substream);
++}
++
++static struct snd_pcm_ops snd_card_sa11xx_ucb1x00_playback_ops = {
++	.open			= snd_card_sa11xx_ucb1x00_open,
++	.close			= snd_card_sa11xx_ucb1x00_close,
++	.ioctl			= snd_pcm_lib_ioctl,
++	.hw_params	    = snd_sa11xx_ucb1x00_hw_params,
++	.hw_free	    = snd_sa11xx_ucb1x00_hw_free,
++	.prepare		= snd_sa11xx_ucb1x00_prepare,
++	.trigger		= snd_sa11xx_ucb1x00_trigger,
++	.pointer		= snd_sa11xx_ucb1x00_pointer,
++};
++
++static struct snd_pcm_ops snd_card_sa11xx_ucb1x00_capture_ops = {
++	.open			= snd_card_sa11xx_ucb1x00_open,
++	.close			= snd_card_sa11xx_ucb1x00_close,
++	.ioctl			= snd_pcm_lib_ioctl,
++	.hw_params	    = snd_sa11xx_ucb1x00_hw_params,
++	.hw_free	    = snd_sa11xx_ucb1x00_hw_free,
++	.prepare		= snd_sa11xx_ucb1x00_prepare,
++	.trigger		= snd_sa11xx_ucb1x00_trigger,
++	.pointer		= snd_sa11xx_ucb1x00_pointer,
++};
++
++static int __init snd_card_sa11xx_ucb1x00_pcm(struct sa11xx_ucb1x00 *sa11xx_ucb1x00, int device)
++{
++	struct snd_pcm *pcm;
++	int err;
++
++	if ((err = snd_pcm_new(sa11xx_ucb1x00->card, "UCB1x00 PCM", device, 1, 1, &pcm)) < 0) {
++		return err;
++    }
++	
++    sa11xx_ucb1x00_audio_init(sa11xx_ucb1x00);
++
++
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_card_sa11xx_ucb1x00_playback_ops);
++	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_sa11xx_ucb1x00_capture_ops);
++	pcm->private_data = sa11xx_ucb1x00;
++	pcm->info_flags = 0;
++	strcpy(pcm->name, "UCB1x00 PCM");
++	
++    err = snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, 
++					      NULL, 64*1024, 64*1024);
++//    printk(KERN_INFO "snd_pcm_lib_preallocate_pages_for_all returns %d\n", err);
++
++
++	/* setup DMA controller */
++	audio_dma_request(&sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_PLAYBACK], audio_dma_callback);
++	audio_dma_request(&sa11xx_ucb1x00->s[SNDRV_PCM_STREAM_CAPTURE], audio_dma_callback);
++
++	sa11xx_ucb1x00->pcm = pcm;
++
++	return 0;
++}
++
++#if 0
++#ifdef CONFIG_PM
++
++static int snd_sa11xx_ucb1x00_suspend(struct platform_device *devptr,
++				      pm_message_t state)
++{
++	struct snd_card *card = platform_get_drvdata(devptr);
++	struct sa11xx_ucb1x00 *chip = card->private_data;
++
++	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
++	snd_pcm_suspend_all(chip->pcm);
++#ifdef HH_VERSION
++	sa1100_dma_sleep(chip->s[SNDRV_PCM_STREAM_PLAYBACK].dmach);
++	sa1100_dma_sleep(chip->s[SNDRV_PCM_STREAM_CAPTURE].dmach);
++#else
++	//FIXME
++#endif
++	l3_command(chip->ucb1x00, CMD_SUSPEND, NULL);
++	sa11xx_uda1341_audio_shutdown(chip);
++
++	return 0;
++}
++
++static int snd_sa11xx_ucb1x00_resume(struct platform_device *devptr)
++{
++	struct snd_card *card = platform_get_drvdata(devptr);
++	struct sa11xx_ucb1x00 *chip = card->private_data;
++
++	sa11xx_ucb1x00_audio_init(chip);
++	l3_command(chip->ucb1x00, CMD_RESUME, NULL);
++#ifdef HH_VERSION	
++	sa1100_dma_wakeup(chip->s[SNDRV_PCM_STREAM_PLAYBACK].dmach);
++	sa1100_dma_wakeup(chip->s[SNDRV_PCM_STREAM_CAPTURE].dmach);
++#else
++	//FIXME
++#endif
++	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
++	return 0;
++}
++#endif /* COMFIG_PM */
++#endif
++
++void snd_sa11xx_ucb1x00_free(struct snd_card *card)
++{
++	struct sa11xx_ucb1x00 *chip = card->private_data;
++    
++//    printk(KERN_INFO "snd_sa11xx_ucb1x00_free called\n");
++
++    if (&chip->s[SNDRV_PCM_STREAM_PLAYBACK]) {
++	    audio_dma_free(&chip->s[SNDRV_PCM_STREAM_PLAYBACK]);
++    }
++	if (&chip->s[SNDRV_PCM_STREAM_CAPTURE]) {
++	    audio_dma_free(&chip->s[SNDRV_PCM_STREAM_CAPTURE]);
++    }
++}
++
++static int ucb1x00_dev_free(struct snd_device *device)
++{
++	return 0;
++}
++
++static int snd_chip_ucb1x00_mixer_new(struct snd_card *card)
++{
++    static struct snd_device_ops ops = {
++        .dev_free =     ucb1x00_dev_free,
++    };
++
++    struct sa11xx_ucb1x00 *chip = card->private_data;
++    int idx;
++    int err;
++
++    snd_BUG_ON(card == NULL);
++
++    for (idx = 0; idx < ARRAY_SIZE(snd_ucb1x00_controls); idx++) {
++        if ((err = snd_ctl_add(card, snd_ctl_new1(&snd_ucb1x00_controls[idx], chip))) < 0) {
++            return err;
++        }
++    }
++
++    if ((err = snd_device_new(card, SNDRV_DEV_CODEC, chip, &ops)) < 0) {
++        return err;
++    }
++
++    strcpy(card->mixername, "UCB1x00 Mixer");
++    //	((struct ucb1x00_dev *)clnt->driver_data)->card = card;
++
++    return 0;
++}
++
++static int __init sa11xx_ucb1x00_audio_add(struct ucb1x00_dev* dev)
++{
++	int err;
++	struct snd_card *card;
++	struct sa11xx_ucb1x00 *chip;
++
++	/* register the soundcard */
++	err = snd_card_create(-1, id, THIS_MODULE, sizeof(struct sa11xx_ucb1x00), &card);
++	if (err < 0) 
++		return -err;
++    
++    
++    	ucb1x00_enable(dev->ucb);
++
++	chip = card->private_data;
++	spin_lock_init(&chip->s[0].dma_lock);
++	spin_lock_init(&chip->s[1].dma_lock);
++
++	card->private_free = snd_sa11xx_ucb1x00_free;
++	chip->card = card;
++	chip->samplerate = AUDIO_RATE_DEFAULT;
++    chip->ucb1x00 = dev;
++    chip->pdev = &dev->ucb->mcp->attached_device;
++    dev->priv = chip;
++
++	// mixer
++	if ((err = snd_chip_ucb1x00_mixer_new(card)))
++		goto nodev;
++
++	// PCM
++	if ((err = snd_card_sa11xx_ucb1x00_pcm(chip, 0)) < 0)
++		goto nodev;
++        
++	strcpy(card->driver, "UCB1x00");
++	strcpy(card->shortname, "Simpad UCB1x00");
++	sprintf(card->longname, "Siemens Simpad with Philips UCB1x00");
++        
++	snd_card_set_dev(card, chip->pdev);
++
++	if ((err = snd_card_register(card)) == 0) {
++		printk( KERN_INFO "Simpad audio support initialized 2\n" );
++		return 0;
++	}
++        
++ nodev:
++	snd_card_free(card);
++	return err;
++}
++
++static void sa11xx_ucb1x00_audio_remove(struct ucb1x00_dev* dev)
++{
++    struct sa11xx_ucb1x00* chip = dev->priv;
++    printk(KERN_INFO "sa11xx_ucb1x00_audio_remove called\n");
++    ucb1x00_disable(dev->ucb);
++    snd_card_free(chip->card);
++}
++
++static int sa11xx_ucb1x00_audio_resume(struct ucb1x00_dev* dev)
++{
++    printk(KERN_INFO "sa11xx_ucb1x00_audio_resume called\n");
++    return 0;
++}
++
++/* ---- GOOD ----------------------------------------------------- */
++
++static struct ucb1x00_driver sa11xx_ucb1x00_audio_driver = {
++	.add	= sa11xx_ucb1x00_audio_add,
++	.remove	= sa11xx_ucb1x00_audio_remove,
++	.resume = sa11xx_ucb1x00_audio_resume,
++};
++
++static int __init sa11xx_ucb1x00_init(void)
++{
++    return ucb1x00_register_driver(&sa11xx_ucb1x00_audio_driver);
++}
++
++static void __exit sa11xx_ucb1x00_exit(void)
++{
++    ucb1x00_unregister_driver(&sa11xx_ucb1x00_audio_driver);
++}
++
++module_init(sa11xx_ucb1x00_init);
++module_exit(sa11xx_ucb1x00_exit);
++
+-- 
+1.6.0.4
+
diff --git a/recipes/linux/linux-2.6.31/collie/defconfig b/recipes/linux/linux-2.6.31/collie/defconfig
new file mode 100644
index 0000000000..e815c97e42
--- /dev/null
+++ b/recipes/linux/linux-2.6.31/collie/defconfig
@@ -0,0 +1,1677 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28
+# Fri Feb 13 10:42:04 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SA1100=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySA0,115200n8 console=tty1 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=3 mem=64M fbcon=rotate:1 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_ASK_IP_FIB_HASH is not set
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+# CONFIG_SCTP_HMAC_MD5 is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_SA1100_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_CRYPT_TKIP=y
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_SHARP=y
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=m
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_PCMCIA_RAYCS=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_CS=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_ATMEL=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_MAC80211_HWSIM=m
+CONFIG_P54_COMMON=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_B43=m
+# CONFIG_B43_PCMCIA is not set
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_RT2X00=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_APMPOWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1200_TS is not set
+CONFIG_TOUCHSCREEN_COLLIE_TS=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_LOCOMO=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+CONFIG_APM_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_COLLIE=y
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=m
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+# CONFIG_SSB_PCMCIAHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_MCP=y
+CONFIG_MCP_SA11X0=y
+CONFIG_MCP_UCB1200=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=500
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+CONFIG_USB_GADGET_SA1100=y
+CONFIG_USB_SA1100=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LOCOMO=y
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_REGULATOR is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_SMX=m
+CONFIG_UIO_SERCOS3=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/recipes/linux/linux_2.6.31.bb b/recipes/linux/linux_2.6.31.bb
index 1c45a58526..0956afdf75 100644
--- a/recipes/linux/linux_2.6.31.bb
+++ b/recipes/linux/linux_2.6.31.bb
@@ -1,22 +1,27 @@
 require linux.inc
 
-PR = "r2"
+PR = "r3"
 
 S = "${WORKDIR}/linux-${PV}"
 
 # Mark archs/machines that this kernel supports
 DEFAULT_PREFERENCE = "-1"
 DEFAULT_PREFERENCE_boc01 = "1"
+DEFAULT_PREFERENCE_collie = "1"
 DEFAULT_PREFERENCE_db1200 = "1"
 DEFAULT_PREFERENCE_qemumips = "1"
 DEFAULT_PREFERENCE_qemux86 = "1"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
            ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.3.bz2;patch=1 \
-           http://maxim.org.za/AT91RM9200/2.6/2.6.31-at91.patch.gz;patch=1 \
            file://defconfig"
 
+SRC_URI_append_db1200 ="\
+            http://maxim.org.za/AT91RM9200/2.6/2.6.31-at91.patch.gz;patch=1 \
+	    "
+
 SRC_URI_append_boc01 = "\
+           http://maxim.org.za/AT91RM9200/2.6/2.6.31-at91.patch.gz;patch=1 \
            file://boc01.dts \
            file://boc01.dts.v1 \
            file://004-081205-usb.patch;patch=1 \
@@ -27,6 +32,25 @@ SRC_URI_append_boc01 = "\
            file://013-091015-lcd.patch;patch=1 \
            "
 
+SRC_URI_append_collie = "\
+           file://0001-add-locomo_spi-driver.patch;patch=1 \
+           file://0002-collie-fix-scoop-convesion-to-new-api.patch;patch=1 \
+           file://0003-collie-prepare-for-gpiolib-use.patch;patch=1 \
+           file://0004-move-drivers-mfd-.h-to-include-linux-mfd.patch;patch=1 \
+           file://0005-collie-locomo-led-change-default-trigger.patch;patch=1 \
+           file://0006-SA1100-make-gpio_to_irq-and-reverse-a-macro.patch;patch=1 \
+           file://0007-add-gpiolib-support-to-ucb1x00.patch;patch=1 \
+           file://0008-collie-convert-to-gpiolib-for-ucb1x00.patch;patch=1 \
+           file://0009-collie-add-battery-driver.patch;patch=1 \
+           file://0010-collie-support-pda_power-driver.patch;patch=1 \
+           file://0011-fix-collie-keyboard-bug.patch;patch=1 \
+           file://0012-add-collie-touchscreen-driver.patch;patch=1 \
+           file://0013-add-sa1100-udc-hack-extra-hacked-for-collie.patch;patch=1 \
+           file://0014-gadget-add-file.patch;patch=1 \
+           file://0004-fix-dma-for-SA1100.patch;patch=1 \
+           "
+
+
 SRC_URI_append_ep93xx = " \
            file://edb9301-fix-machine-id.patch;patch=1 \
            "