u-boot-mkimage-openmoko-native: Unused now, remove.

Signed-off-by: Tom Rini <tom_rini@mentor.com>

60 files changed, 0 insertions, 26575 deletions

diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-create-optional.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-create-optional.patch
deleted file mode 100644
index d7a2a872e5..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-create-optional.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-This patch makes creation of the BBT optional for the s3c24x0 platform.
-It adds:
-
-- a new platform-independent NAND-wide flag NAND_DONT_CREATE_BBT
-- one user of this flag, namely s3c24x0
-
-Experimental.
-
-- Werner Almesberger <werner@openmoko.org>
-
-
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/nand.c	2007-02-16 23:53:29.000000000 +0100
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c	2007-02-16 23:53:54.000000000 +0100
-@@ -169,7 +169,7 @@
- 
- 	nand->eccmode = NAND_ECC_SOFT;
- #ifdef CONFIG_S3C2410_NAND_BBT
--	nand->options = NAND_USE_FLASH_BBT;
-+	nand->options = NAND_USE_FLASH_BBT | NAND_DONT_CREATE_BBT;
- #else
- 	nand->options = 0;
- #endif
-Index: u-boot/drivers/nand/nand_bbt.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_bbt.c	2007-02-16 23:53:36.000000000 +0100
-+++ u-boot/drivers/nand/nand_bbt.c	2007-02-16 23:53:54.000000000 +0100
-@@ -678,7 +678,8 @@
- 		}
- create:
- 		/* Create the bad block table by scanning the device ? */
--		if (!(td->options & NAND_BBT_CREATE))
-+		if (!(td->options & NAND_BBT_CREATE) ||
-+		  (this->options & NAND_DONT_CREATE_BBT))
- 			continue;
- 
- 		/* Create the table in memory by scanning the chip(s) */
-Index: u-boot/include/linux/mtd/nand.h
-===================================================================
---- u-boot.orig/include/linux/mtd/nand.h	2007-02-16 23:53:08.000000000 +0100
-+++ u-boot/include/linux/mtd/nand.h	2007-02-16 23:53:54.000000000 +0100
-@@ -187,7 +187,8 @@
-  * This can only work if we have the ecc bytes directly behind the
-  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
- #define NAND_HWECC_SYNDROME	0x00020000
--
-+/* Do not create an BBT if none is found. Overrides NAND_BBT_CREATE. */
-+#define NAND_DONT_CREATE_BBT	0x00040000
- 
- /* Options set by nand scan */
- /* Nand scan has allocated oob_buf */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-scan-second.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-scan-second.patch
deleted file mode 100644
index 37b2807908..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/bbt-scan-second.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-Scan also the second OOB page for bad block information.
-
-board/neo1973/gta01/nand.c (board_nand_init): added board-specific badblock
-  pattern which sets NAND_BBT_SCAN2NDPAGE
-drivers/nand/nand_base.c (nand_block_bad): also consider the second page in a
-  block if NAND_BBT_SCAN2NDPAGE is set
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/gta01/nand.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/nand.c
-+++ u-boot/board/neo1973/gta01/nand.c
-@@ -113,9 +113,23 @@
- }
- 
- 
-+/* Derived from drivers/nand/nand_bbt.c:smallpage_flashbased */
-+
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr badblock_pattern = {
-+	.options =
-+	    NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES | NAND_BBT_SCAN2NDPAGE,
-+	.offs = 5,
-+	.len = 1,
-+	.pattern = scan_ff_pattern
-+};
-+
-+
- int board_nand_init(struct nand_chip *nand)
- {
- 	nand->read_otp = samsung_nand_read_otp;
- 	nand->write_otp = samsung_nand_write_otp;
-+	nand->badblock_pattern = &badblock_pattern;
- 	return s3c24x0_nand_init(nand);
- }
-Index: u-boot/drivers/nand/nand_base.c
-===================================================================
---- u-boot.orig/drivers/nand/nand_base.c
-+++ u-boot/drivers/nand/nand_base.c
-@@ -421,7 +421,7 @@
-  *
-  * Check, if the block is bad.
-  */
--static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+static int nand_block_bad_page(struct mtd_info *mtd, loff_t ofs, int getchip)
- {
- 	int page, chipnr, res = 0;
- 	struct nand_chip *this = mtd->priv;
-@@ -460,6 +460,18 @@
- 	return res;
- }
- 
-+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+{
-+	struct nand_chip *this = mtd->priv;
-+
-+	if (nand_block_bad_page(mtd, ofs, getchip))
-+		return 1;
-+	if (this->badblock_pattern->options & NAND_BBT_SCAN2NDPAGE &&
-+	    nand_block_bad_page(mtd, ofs+(1 << this->page_shift), getchip))
-+		return 1;
-+	return 0;
-+}
-+
- /**
-  * nand_default_block_markbad - [DEFAULT] mark a block bad
-  * @mtd:	MTD device structure
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-and-nand.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-and-nand.patch
deleted file mode 100644
index fa0de39ab7..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-and-nand.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-Auto-detect whether we're booting from RAM or NAND, and act accordingly. This
-allows us to use the same u-boot binary for all boot modes.
-
-include/configs/neo1973.h: introduced new config option
-  CONFIG_LL_INIT_NAND_ONLY to perform low-level initialization only when
-  booting from NAND
-include/configs/neo1973.h: got rid of BUILD_FOR_RAM
-cpu/arm920t/start.S: detect if we need to boot from NAND at run time (i.e., if
-  we're running at address 0)
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -157,18 +157,26 @@
- 	str	r1, [r0]
- #endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
- 
--	/*
--	 * we do sys-critical inits only at reboot,
--	 * not when booting from ram!
--	 */
- #ifndef CONFIG_SKIP_LOWLEVEL_INIT
-+#ifndef CONFIG_LL_INIT_NAND_ONLY
- 	bl	cpu_init_crit
- #endif
-+#endif
- 
- #ifndef CONFIG_SKIP_RELOCATE_UBOOT
--#ifndef CONFIG_S3C2410_NAND_BOOT
--relocate:				/* relocate U-Boot to RAM	    */
- 	adr	r0, _start		/* r0 <- current position of code   */
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+					/* are we running from NAND ?	    */
-+#define	BWSCON	0x48000000
-+	ldr	r1, =BWSCON		/* Z = CPU booted from NAND	    */
-+	ldr	r1, [r1]
-+	tst	r1, #6			/* BWSCON[2:1] = OM[1:0]	    */
-+	teqeq	r0, #0			/* Z &= running at address 0	    */
-+	beq	nand_load
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-+
-+relocate:				/* relocate U-Boot to RAM	    */
- 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
- 	cmp     r0, r1                  /* don't reloc during debug         */
- 	beq     done_relocate
-@@ -188,10 +196,13 @@
- 	ldr	pc, _done_relocate	/* jump to relocated code */
- _done_relocate:
- 	.word	done_relocate
--done_relocate:
--#else /* NAND_BOOT */
--relocate:
--copy_myself:
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+nand_load:
-+#if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && defined(CONFIG_LL_INIT_NAND_ONLY)
-+	bl	cpu_init_crit
-+#endif
-+
- 	/* mov	r10, lr */
- 
- 	@ reset NAND
-@@ -275,7 +286,8 @@
- #endif
- 1:	b	1b
- done_nand_read:
--#endif /* NAND_BOOT */
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-+done_relocate:
- #endif /* CONFIG_SKIP_RELOCATE_UBOOT */
- 
- 	/* Set up the stack						    */
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -26,14 +26,10 @@
- #ifndef __CONFIG_H
- #define __CONFIG_H
- 
--#if defined(BUILD_FOR_RAM)
--/* If we want to start u-boot from inside RAM */
--#define CONFIG_SKIP_LOWLEVEL_INIT	1
--#else
--/* we want to start u-boot directly from within NAND flash */
-+/* we want to be able to start u-boot directly from within NAND flash */
-+#define CONFIG_LL_INIT_NAND_ONLY
- #define CONFIG_S3C2410_NAND_BOOT	1
- #define CONFIG_S3C2410_NAND_SKIP_BAD	1
--#endif
- 
- #define CFG_UBOOT_SIZE		0x40000 /* size of u-boot, for NAND loading */
- 
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-reloc.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-reloc.patch
deleted file mode 100644
index 53a3e05c67..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-from-ram-reloc.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-This patch allows us to boot from anywhere in RAM. It mainly sets the stage
-for later patches. The only real changes here is the better handling of already
-cached code (e.g., if we were started by a previous instance of u-boot), and
-that we drop CONFIG_SKIP_RELOCATE_UBOOT from neo1973.h
-
-cpu/arm920t/start.S: if not relocating, instead of going straight to
-  stack_setup, jump to done_relocate, which may perform other setup tasks
-cpu/arm920t/start.S: after relocating, flush the cache and jump to the new code
-include/configs/neo1973.h: remove CONFIG_SKIP_RELOCATE_UBOOT
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -171,7 +171,7 @@ relocate:				/* relocate U-Boot to RAM	 
- 	adr	r0, _start		/* r0 <- current position of code   */
- 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
- 	cmp     r0, r1                  /* don't reloc during debug         */
--	beq     stack_setup
-+	beq     done_relocate
- 
- 	ldr	r2, _armboot_start
- 	ldr	r3, _bss_start
-@@ -181,8 +181,14 @@ relocate:				/* relocate U-Boot to RAM	 
- copy_loop:
- 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
- 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
--	cmp	r0, r2			/* until source end addreee [r2]    */
-+	cmp	r0, r2			/* until source end address [r2]    */
- 	ble	copy_loop
-+	mov	r0, #0			/* flush v3/v4 cache */
-+	mcr	p15, 0, r0, c7, c7, 0
-+	ldr	pc, _done_relocate	/* jump to relocated code */
-+_done_relocate:
-+	.word	done_relocate
-+done_relocate:
- #else /* NAND_BOOT */
- relocate:
- copy_myself:
-@@ -270,7 +276,7 @@ notmatch:
- 1:	b	1b
- done_nand_read:
- #endif /* NAND_BOOT */
--#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-+#endif /* CONFIG_SKIP_RELOCATE_UBOOT */
- 
- 	/* Set up the stack						    */
- stack_setup:
-Index: u-boot/include/configs/neo1973_gta01.h
-===================================================================
---- u-boot.orig/include/configs/neo1973_gta01.h
-+++ u-boot/include/configs/neo1973_gta01.h
-@@ -28,7 +28,6 @@
- 
- #if defined(BUILD_FOR_RAM)
- /* If we want to start u-boot from inside RAM */
--#define CONFIG_SKIP_RELOCATE_UBOOT	1
- #define CONFIG_SKIP_LOWLEVEL_INIT	1
- #else
- /* we want to start u-boot directly from within NAND flash */
diff --git a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-menu.patch b/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-menu.patch
deleted file mode 100644
index b524ace65d..0000000000
--- a/recipes/u-boot/u-boot-mkimage-openmoko-native/boot-menu.patch
+++ /dev/null
@@ -1,769 +0,0 @@
-board/neo1973/bootmenu.c: simple configurable boot menu
-board/neo1973/neo1973.c (neo1973_new_second): return 1 if a new second has
-  started since the last call
-board/neo1973/neo1973.c (neo1973_on_key_pressed): return 1 if the $POWER key is
-  pressed
-board/neo1973/neo1973.c (board_late_init): make use of neo1973_new_second and
-  neo1973_on_key_pressed
-board/neo1973/neo1973.h: added function prototypes
-u-boot/board/neo1973/neo1973.c (board_late_init): enter the boot menu when 
-  "AUX" was pressed at least half the time
-u-boot/board/neo1973/neo1973.c (board_late_init): minor code cleanup
-u-boot/common/console.c, include/console.h: added "console_poll_hook" to be
-  called when waiting for console in put in "getc" and "tstc"
-board/neo1973/neo1973.c (board_late_init): poll for the boot menu also on RAM
-  boot, reset, or unknown cause
-board/neo1973/neo1973.c (board_late_init): don't look for the power key if
-  woken up by the charger
-board/neo1973/neo1973.h, board/neo1973/neo1973.c, board/neo1973/bootmenu.c:
-  renamed neo1973_911_key_pressed to neo1973_aux_key_pressed
-
-- Werner Almesberger <werner@openmoko.org>
-
-Index: u-boot/board/neo1973/common/bootmenu.c
-===================================================================
---- /dev/null
-+++ u-boot/board/neo1973/common/bootmenu.c
-@@ -0,0 +1,120 @@
-+/*
-+ * bootmenu.c - Boot menu
-+ *
-+ * Copyright (C) 2006-2007 by Openmoko, Inc.
-+ * Written by Werner Almesberger <werner@openmoko.org>
-+ * All Rights Reserved
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+
-+
-+#include <common.h>
-+#include <environment.h>
-+#include <bootmenu.h>
-+#include <asm/atomic.h>
-+
-+#ifdef CONFIG_USBD_DFU
-+#include "usbdcore.h"
-+#include "usb_dfu.h"
-+#endif
-+
-+#include "neo1973.h"
-+
-+
-+#define DEBOUNCE_LOOPS		1000	/* wild guess */
-+
-+
-+static int debounce(int (*fn)(void), int *last)
-+{
-+	int on, i;
-+
-+again:
-+	on = fn();
-+	if (on != *last)
-+		for (i = DEBOUNCE_LOOPS; i; i--)
-+			if (on != fn())
-+				goto again;
-+	*last = on;
-+	return on;
-+}
-+
-+
-+static int aux_key(void *user)
-+{
-+	static int last_aux = -1;
-+
-+	return debounce(neo1973_aux_key_pressed, &last_aux);
-+}
-+
-+
-+static int on_key(void *user)
-+{
-+	static int last_on = -1;
-+
-+	return debounce(neo1973_on_key_pressed, &last_on);
-+}
-+
-+
-+static void factory_reset(void *user)
-+{
-+	default_env();
-+	run_command("dynpart", 0);
-+	run_command("bootd", 0);
-+}
-+
-+
-+static int seconds(void *user)
-+{
-+	return neo1973_new_second();
-+}
-+
-+
-+static int system_idle(void)
-+{
-+#ifdef  CONFIG_USBD_DFU
-+	if (system_dfu_state)
-+		return *system_dfu_state == DFU_STATE_appIDLE;
-+#endif
-+        return 1;
-+}
-+
-+
-+static void poweroff_if_idle(void *user)
-+{
-+	unsigned long flags;
-+
-+	local_irq_save(flags);
-+	if (system_idle())
-+		neo1973_poweroff();
-+	local_irq_restore(flags);
-+}
-+
-+
-+static struct bootmenu_setup bootmenu_setup = {
-+	.next_key = aux_key,
-+	.enter_key = on_key,
-+	.seconds = seconds,
-+	.idle_action = poweroff_if_idle,
-+};
-+
-+
-+void neo1973_bootmenu(void)
-+{
-+	bootmenu_add("Boot", NULL, "bootd");
-+	bootmenu_init(&bootmenu_setup);
-+	bootmenu_add("Factory reset", factory_reset, NULL);
-+	bootmenu();
-+}
-Index: u-boot/board/neo1973/gta01/gta01.c
-===================================================================
---- u-boot.orig/board/neo1973/gta01/gta01.c
-+++ u-boot/board/neo1973/gta01/gta01.c
-@@ -229,10 +229,15 @@ int board_late_init(void)
- 	extern unsigned char booted_from_nand;
- 	unsigned char tmp;
- 	char buf[32];
-+	int menu_vote = 0; /* <= 0: no, > 0: yes */
-+	int seconds = 0;
- 
- 	/* Initialize the Power Management Unit with a safe register set */
- 	pcf50606_init();