Make the do_patch apply=yes param implicit if extension is .diff/.patch

For .diff/.patch you need to apply manually, you can specify apply=no.

Signed-off-by: Chris Larson <chris_larson@mentor.com>
Acked-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Khem Raj <raj.khem@gmail.com>

1 files changed, 86 insertions, 86 deletions

diff --git a/recipes/u-boot/u-boot_git.bb b/recipes/u-boot/u-boot_git.bb
index 97aa56f1f4..8dca7cfd53 100644
--- a/recipes/u-boot/u-boot_git.bb
+++ b/recipes/u-boot/u-boot_git.bb
@@ -14,48 +14,48 @@ SRCREV_palmpre = "6b8edfde22acc574b5532e9f086e6a7287a9bc78"
 SRCREV_cm-t35 = "3c014f1586d5bfe30dca7549396915c83f31cd30"
 SRCREV_mpc8641-hpcn = "f20393c5e787b3776c179d20f82a86bda124d651"
 SRCREV_p2020ds = "f20393c5e787b3776c179d20f82a86bda124d651"
-SRC_URI_append_afeb9260 = " file://AFEB9260-network-fix.patch;apply=yes"
-SRC_URI_append_afeb9260-180 = " file://AFEB9260-network-fix.patch;apply=yes"
-SRC_URI_append_cm-t35 = "file://cm-t35/cm-t35.patch;apply=yes"
+SRC_URI_append_afeb9260 = " file://AFEB9260-network-fix.patch"
+SRC_URI_append_afeb9260-180 = " file://AFEB9260-network-fix.patch"
+SRC_URI_append_cm-t35 = "file://cm-t35/cm-t35.patch"
 
 SRC_URI_beagleboard = "git://www.denx.de/git/u-boot.git;protocol=git \
-                       file://0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch;apply=yes \
-                       file://0002-OMAP3-add-board-revision-detection-for-Overo.patch;apply=yes \
-                       file://0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch;apply=yes \
-                       file://0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch;apply=yes \
-                       file://0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch;apply=yes \
-                       file://0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch;apply=yes \
-                       file://0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch;apply=yes \
-                       file://0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch;apply=yes \
-                       file://0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch;apply=yes \
-                       file://0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch;apply=yes \
-                       file://0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch;apply=yes \
-                       file://0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch;apply=yes \
-                       file://0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch;apply=yes \
-                       file://0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch;apply=yes \
-                       file://0015-OMAP3-mem.c-enhance-the-RAM-test.patch;apply=yes \
-                       file://0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch;apply=yes \
-                       file://0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch;apply=yes \
-                       file://0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch;apply=yes \
-                       file://0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch;apply=yes \
-                       file://0020-OMAP3-beagle-add-support-for-Beagle-xM.patch;apply=yes \
-                       file://0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch;apply=yes \
-                       file://0022-OMAP3-beagle-implement-expansionboard-detection-base.patch;apply=yes \
-                       file://0023-beagleboard-display-message-about-I2C-errors-being-e.patch;apply=yes \
-                       file://0024-beagleboard-fix-TCT-expansionboard-IDs.patch;apply=yes \
-                       file://0025-Add-DSS-driver-for-OMAP3.patch;apply=yes \
-                       file://0026-Enable-DSS-driver-for-Beagle.patch;apply=yes \
-                       file://0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch;apply=yes \
-                       file://0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch;apply=yes \
-                       file://0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch;apply=yes \
-                       file://0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch;apply=yes \
-                       file://0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch;apply=yes \
-                       file://0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch;apply=yes \
-                       file://0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch;apply=yes \
-                       file://0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch;apply=yes \
-                       file://0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch;apply=yes \
-                       file://0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch;apply=yes \
-                       file://0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch;apply=yes \
+                       file://0001-OMAP3-enable-i2c-bus-switching-for-Beagle-and-Overo.patch \
+                       file://0002-OMAP3-add-board-revision-detection-for-Overo.patch \
+                       file://0003-OMAP3-update-Beagle-revision-detection-to-recognize-.patch \
+                       file://0004-OMAP3-Set-VAUX2-to-1.8V-for-EHCI-PHY-on-Beagle-Rev-C.patch \
+                       file://0005-OMAP3-add-entry-for-rev-3.1.2-check-and-display-max-.patch \
+                       file://0006-OMAP3-add-mpurate-boot-arg-for-overo-and-beagle.patch \
+                       file://0007-OMAP3-detect-expansion-board-type-version-using-eepr.patch \
+                       file://0008-OMAP3-Overo-enable-config-eeprom-to-set-u-boot-env-v.patch \
+                       file://0009-OMAP3-Overo-enable-input-on-MMC1_CLK-and-MMC3_CLK-pi.patch \
+                       file://0010-OMAP3-Overo-set-CONFIG_SYS_I2C_SPEED-to-400Khz.patch \
+                       file://0011-OMAP3-trim-excessively-long-delays-in-i2c-driver.patch \
+                       file://0012-OMAP3-Overo-allow-expansion-boards-with-any-vendor-I.patch \
+                       file://0013-OMAP3-Overo-change-address-of-expansion-eeprom-to-0x.patch \
+                       file://0014-OMAP3-board.c-don-t-attempt-to-set-up-second-RAM-ban.patch \
+                       file://0015-OMAP3-mem.c-enhance-the-RAM-test.patch \
+                       file://0016-env_nand.c-fail-gracefully-if-no-nand-is-present.patch \
+                       file://0017-OMAP3-add-definitions-to-support-sysinfo-cpu-and-cpu.patch \
+                       file://0018-OMAP3-sys_info-update-cpu-detection-for-36XX-37XX.patch \
+                       file://0019-OMAP3-clocks-update-clock-setup-for-36XX-37XX.patch \
+                       file://0020-OMAP3-beagle-add-support-for-Beagle-xM.patch \
+                       file://0021-OMAP3-Beagle-Overo-remove-omapfb.debug-y-from-defaul.patch \
+                       file://0022-OMAP3-beagle-implement-expansionboard-detection-base.patch \
+                       file://0023-beagleboard-display-message-about-I2C-errors-being-e.patch \
+                       file://0024-beagleboard-fix-TCT-expansionboard-IDs.patch \
+                       file://0025-Add-DSS-driver-for-OMAP3.patch \
+                       file://0026-Enable-DSS-driver-for-Beagle.patch \
+                       file://0027-beagleboardXM-don-t-set-mpurate-on-xM-in-bootargs.patch \
+                       file://0028-OMAP3-fix-and-clean-up-L2-cache-enable-disable-funct.patch \
+                       file://0029-OMAP3-convert-setup_auxcr-to-pure-asm.patch \
+                       file://0030-OMAP3-apply-Cortex-A8-errata-workarounds-only-on-aff.patch \
+                       file://0031-OMAP3-beagle-add-more-expansionboards-based-on-http-.patch \
+                       file://0032-OMAP3-beagle-set-mpurate-to-600-for-revB-and-revC1-3.patch \
+                       file://0033-OMAP3-beagle-prettify-expansionboard-message-a-bit.patch \
+                       file://0034-OMAP3-beagle-add-pinmux-for-Tincantools-Trainer-expa.patch \
+                       file://0035-OMAP3-Beagle-set-mpurate-to-1000-for-xM.patch \
+                       file://0036-OMAP3-Beagle-decrease-bootdelay-to-3-use-VGA-for-def.patch \
+                       file://0037-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch \
                        file://fw_env.config \
 "
 SRCREV_beagleboard = "ca6e1c136ddb720c3bb2cc043b99f7f06bc46c55"
@@ -66,29 +66,29 @@ SRCREV_calamari = "533cf3a024947aaf74c16573a6d951cd0c3d0a7d"
 PV_calamari = "2009.11+${PR}+gitr${SRCREV}"
 SRC_URI_calamari = " \
         git://git.denx.de/u-boot-mpc85xx.git;protocol=git \
-	file://0002-cmd_itest.c-fix-pointer-dereferencing.patch;apply=yes \
-	file://0001-cmd_i2c.c-reduced-subaddress-length-to-3-bytes.patch;apply=yes \
-	file://0002-cmd_bootm.c-made-subcommand-array-static.patch;apply=yes \
-	file://0003-cmd_i2c.c-reworked-subcommand-handling.patch;apply=yes \
-	file://0004-cmd_i2c.c-sorted-commands-alphabetically.patch;apply=yes \
-	file://0005-cmd_i2c.c-added-i2c-read-to-memory-function.patch;apply=yes \
-	file://0007-cmd_setexpr-allow-memory-addresses-and-env-vars-in-e.patch;apply=yes \
+	file://0002-cmd_itest.c-fix-pointer-dereferencing.patch \
+	file://0001-cmd_i2c.c-reduced-subaddress-length-to-3-bytes.patch \
+	file://0002-cmd_bootm.c-made-subcommand-array-static.patch \
+	file://0003-cmd_i2c.c-reworked-subcommand-handling.patch \
+	file://0004-cmd_i2c.c-sorted-commands-alphabetically.patch \
+	file://0005-cmd_i2c.c-added-i2c-read-to-memory-function.patch \
+	file://0007-cmd_setexpr-allow-memory-addresses-and-env-vars-in-e.patch \
         "
 
 UBOOT_MACHINE_calamari = "MPC8536DS_config"
 
 SRC_URI_omap3-touchbook = "git://gitorious.org/u-boot-omap3/mainline.git;branch=omap3-dev;protocol=git \
                  file://fw_env.config \
-                 file://dss2.patch;apply=yes \
-                 file://600mhz.patch;apply=yes \
-                 file://new-pinmux.patch;apply=yes \
-                 file://spi3.patch;apply=yes \
-                 file://spi4.patch;apply=yes \
-                 file://headphone.patch;apply=yes \
-                 file://power.patch;apply=yes \
-                 file://ai-logo.patch;apply=yes \
-                 file://mmcinit.patch;apply=yes \
-                 file://touchbook-config.patch;apply=yes \
+                 file://dss2.patch \
+                 file://600mhz.patch \
+                 file://new-pinmux.patch \
+                 file://spi3.patch \
+                 file://spi4.patch \
+                 file://headphone.patch \
+                 file://power.patch \
+                 file://ai-logo.patch \
+                 file://mmcinit.patch \
+                 file://touchbook-config.patch \
 "
 SRCREV_omap3-touchbook = "d363f9cb0918a1b6b92e2e20d01543d0c4f53274"
 PV_omap3-touchbook = "2009.05+${PR}+gitr${SRCREV}"
@@ -105,22 +105,22 @@ PV_dm3730-am3715-evm = "2009.11+${PR}+gitr${SRCREV}"
 
 SRCREV_am3517-evm = "e60beb13cf0"
 SRC_URI_append_am3517-evm = " \
-file://omap3evm/0001-Changes-for-making-a-NAND-build.patch;apply=yes \
-file://omap3evm/0002-Fix-for-NFS-boot-for-OMAP3-EVM.patch;apply=yes \
-file://omap3evm/0003-OMAP3-timer-handling-to-1ms-tick-and-CONFIG_SYS_HZ-t.patch;apply=yes \
-file://omap3evm/0004-Reverse-patch-for-NFS-boot-to-fix-comments-provided.patch;apply=yes \
-file://omap3evm/0005-SMC911x-driver-fixed-for-NFS-boot.patch;apply=yes \
-file://omap3evm/0006-Added-OMAP3517-3505-support.patch;apply=yes \
-file://omap3evm/0007-OMAP3517TEB-validated-on-OMAP3517TEB-board.patch;apply=yes \
-file://omap3evm/0008-OMAP3517PRE-ALPHA-validated-on-OMAP3517PRE_ALPHA-bo.patch;apply=yes \
-file://omap3evm/0009-OMAP3517PRE-ALPHA-DDR-size-issue-fixed.patch;apply=yes \
-file://omap3evm/0010-OMAP3517PRE-ALPHA-Mux-configuration-for-MMC-CD-and.patch;apply=yes \
-file://omap3evm/0011-Ethernet-driver-functional-no-need-for-time-delay.patch;apply=yes \
-file://omap3evm/0012-EMAC-driver-Implement-GPIO-driven-PHY-reset.patch;apply=yes \
-file://omap3evm/0013-Cleaned-up-during-EVM-hang-issue.patch;apply=yes \
-file://omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch;apply=yes \
-file://omap3evm/0015-EMAC-driver-Check-for-link-status-in-packet-send-lo.patch;apply=yes \
-file://omap3evm/0016-Config-option-and-name-changed-to-omap3517_evm.patch;apply=yes \
+file://omap3evm/0001-Changes-for-making-a-NAND-build.patch \
+file://omap3evm/0002-Fix-for-NFS-boot-for-OMAP3-EVM.patch \
+file://omap3evm/0003-OMAP3-timer-handling-to-1ms-tick-and-CONFIG_SYS_HZ-t.patch \
+file://omap3evm/0004-Reverse-patch-for-NFS-boot-to-fix-comments-provided.patch \
+file://omap3evm/0005-SMC911x-driver-fixed-for-NFS-boot.patch \
+file://omap3evm/0006-Added-OMAP3517-3505-support.patch \
+file://omap3evm/0007-OMAP3517TEB-validated-on-OMAP3517TEB-board.patch \
+file://omap3evm/0008-OMAP3517PRE-ALPHA-validated-on-OMAP3517PRE_ALPHA-bo.patch \
+file://omap3evm/0009-OMAP3517PRE-ALPHA-DDR-size-issue-fixed.patch \
+file://omap3evm/0010-OMAP3517PRE-ALPHA-Mux-configuration-for-MMC-CD-and.patch \
+file://omap3evm/0011-Ethernet-driver-functional-no-need-for-time-delay.patch \
+file://omap3evm/0012-EMAC-driver-Implement-GPIO-driven-PHY-reset.patch \
+file://omap3evm/0013-Cleaned-up-during-EVM-hang-issue.patch \
+file://omap3evm/0014-EMAC-driver-cleanup-removed-debug-prints.patch \
+file://omap3evm/0015-EMAC-driver-Check-for-link-status-in-packet-send-lo.patch \
+file://omap3evm/0016-Config-option-and-name-changed-to-omap3517_evm.patch \
 "
 PV_am3517-evm = "2009.03+${PR}+gitr${SRCREV}"
 
@@ -129,7 +129,7 @@ SRCREV_omapzoom = "d691b424f1f5bf7eea3a4131dfc578d272e8f335"
 PV_omapzoom = "2009.01+${PR}+gitr${SRCREV}"
 
 SRC_URI_omapzoom2 = "git://dev.omapzoom.org/pub/scm/bootloader/u-boot.git;branch=master;protocol=git \
-                     file://0001-OMAP3-set-L1NEON-bit-in-aux-control-register.patch;apply=yes"
+                     file://0001-OMAP3-set-L1NEON-bit-in-aux-control-register.patch"
 SRCREV_omapzoom2 = "78e778e0ea884306841c6499851a1e35177d81d0"
 PV_omapzoom2 = "1.1.4+${PR}+gitr${SRCREV}"
 PE_omapzoom2 = "1"
@@ -158,8 +158,8 @@ do_compile_omapzoom36x () {
 }
 
 SRC_URI_overo = "git://gitorious.org/u-boot-omap3/mainline.git;branch=omap3-dev;protocol=git \
-                 file://fw-env.patch;apply=yes \
-                 file://dss2.patch;apply=yes \
+                 file://fw-env.patch \
+                 file://dss2.patch \
 "
 SRCREV_overo = "2dea1db2a3b7c12ed70bbf8ee50755089c5e5170"
 PV_overo = "2009.03+${PR}+gitr${SRCREV}"
@@ -224,18 +224,18 @@ SRCREV_mini2440 = "3516c35fb777ca959e5cadf2156a792ca10e1cff"
 SRC_URI_micro2440 = "git://repo.or.cz/u-boot-openmoko/mini2440.git;protocol=git;branch=dev-mini2440-stable"
 SRCREV_micro2440 = "3516c35fb777ca959e5cadf2156a792ca10e1cff"
 
-SRC_URI_neuros-osd2 += "file://Makefile-fix.patch;apply=yes"
-SRC_URI_append_akita = "file://pdaXrom-u-boot.patch;apply=yes \
-                        file://uboot-eabi-fix-HACK2.patch;apply=yes \
-                        file://akita-standard-partitioning.patch;apply=yes \
+SRC_URI_neuros-osd2 += "file://Makefile-fix.patch"
+SRC_URI_append_akita = "file://pdaXrom-u-boot.patch \
+                        file://uboot-eabi-fix-HACK2.patch \
+                        file://akita-standard-partitioning.patch \
                        "
-SRC_URI_append_spitz = "file://pdaXrom-u-boot.patch;apply=yes \
-                        file://uboot-eabi-fix-HACK2.patch;apply=yes \
-                        file://spitz-standard-partitioning.patch;apply=yes \
+SRC_URI_append_spitz = "file://pdaXrom-u-boot.patch \
+                        file://uboot-eabi-fix-HACK2.patch \
+                        file://spitz-standard-partitioning.patch \
                        "
-SRC_URI_append_c7x0 = "file://pdaXrom-u-boot.patch;apply=yes \
-                       file://uboot-eabi-fix-HACK2.patch;apply=yes \
-                       file://corgi-standard-partitioning.patch;apply=yes \
+SRC_URI_append_c7x0 = "file://pdaXrom-u-boot.patch \
+                       file://uboot-eabi-fix-HACK2.patch \
+                       file://corgi-standard-partitioning.patch \
                        "
 SRC_URI_sheevaplug = "git://git.denx.de/u-boot-marvell.git;protocol=git;branch=testing"
 SRCREV_sheevaplug = "119b9942da2e450d4e525fc004208dd7f7d062e0"