openldap: remove versions 2.2.29 and 2.3.11

Both are almost 5 years old and seem to be unmaintained, also not supported
by upstream authors and probably containing tons of known vulnerabilities.

Signed-off-by: Roman I Khimov <khimov@altell.ru>

1 files changed, 0 insertions, 256 deletions

diff --git a/recipes/openldap/openldap_2.2.29.bb b/recipes/openldap/openldap_2.2.29.bb
deleted file mode 100644
index 8d17e47109..0000000000
--- a/recipes/openldap/openldap_2.2.29.bb
+++ /dev/null
@@ -1,256 +0,0 @@
-# OpenLDAP, a license free (see http://www.OpenLDAP.org/license.html)
-#
-DESCRIPTION = "OpenLDAP Software is an open source implementation of the Lightweight Directory Access Protocol."
-HOMEPAGE = "http://www.OpenLDAP.org/license.html"
-PRIORITY = "optional"
-# The OpenLDAP Public License - see the HOMEPAGE - defines
-# the license.  www.openldap.org claims this is Open Source
-# (see http://www.openldap.org), the license appears to be
-# basically BSD.  opensource.org does not record this license
-# at present (so it is apparently not OSI certified).
-LICENSE = "OpenLDAP"
-SECTION = "libs"
-
-PR = "r0"
-
-SRC_URI = "ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/${P}.tgz"
-SRC_URI += "file://openldap-autoconf.patch"
-# The build tries to run a host executable, this fails.  The patch
-# causes the executable and its data to be installed instead of
-# the output - ucgendat must be run after the ipkg install!
-SRC_URI += "file://ucgendat.patch"
-# The original top.mk used INSTALL, not INSTALL_STRIP_PROGRAM when
-# installing .so and executables, this fails in cross compilation
-# environments
-SRC_URI += "file://install-strip.patch"
-
-inherit autotools
-
-# OPTIONS
-# The following two variables can be set in a distro or local.conf
-# to switch features on.  Each feature foo defines OPENLDAP_OPTION_foo
-# and OPENLDAP_DEPENDS_foo in this file - to include feature foo add
-# the two variables into the setting of the options below (please use
-# += because that means this can be done in *both* distro.conf and
-# local.conf!
-OPENLDAP_OPTIONS ?= ""
-OPENLDAP_DEPENDS ?= ""
-
-# CONFIG DEFINITIONS
-# The following is necessary because it cannot be determined for a
-# cross compile automagically.  Select should yield fine on all OE
-# systems...
-EXTRA_OECONF += "--with-yielding-select=yes"
-# Shared libraries are nice...
-EXTRA_OECONF += "--enable-dynamic"
-#
-# Disable TLS to remove the need for openssl/libcrypto
-OPENLDAP_OPTION_tls  ?= "--without-tls"
-# set the following to " openssl" to build tls support
-OPENLDAP_DEPENDS_tls ?=
-EXTRA_OECONF += "${OPENLDAP_OPTION_tls}"
-DEPENDS += "${OPENLDAP_DEPENDS_tls}"
-
-# SLAPD options
-#
-# UNIX crypt(3) passwd support:
-EXTRA_OECONF += "--enable-crypt"
-#
-# Enable dynamic module loading.  If this is *disabled* the
-# dependency on libtool is removed (to disable set the following
-# to variables to "" in a .conf file).
-OPENLDAP_OPTION_modules += "lt_cv_dlopen_self=yes --enable-modules"
-OPENLDAP_DEPENDS_modules += "libtool"
-EXTRA_OECONF += " ${OPENLDAP_OPTION_modules}"
-DEPENDS += "${OPENLDAP_DEPENDS_modules}"
-
-# SLAPD BACKEND
-#
-# The backend must be set by the configuration.  This controls the
-# required database, the default database, bdb, is turned off but
-# can be turned back on again and it *is* below!  The monitor backend
-# is also disabled.  If you try to change the backends but fail to
-# enable a single one the build will fail in an obvious way.
-#
-EXTRA_OECONF += "--disable-bdb --disable-monitor"
-#
-# Backends="bdb dnssrv hdb ldap ldbm meta monitor null passwd perl shell sql"
-#
-# Note that multiple backends can be built.  The ldbm backend requires a
-# build-time choice of database API.  The bdb backend forces this to be
-# DB4.  To use the gdbm (or other) API the Berkely database module must
-# be removed from the build.
-md = "${libexecdir}/openldap"
-#
-#--enable-bdb          enable Berkeley DB backend no|yes|mod yes
-# The Berkely DB is the standard choice.  This version of OpenLDAP requires
-# the version 4 implementation or better.
-# To disable this set all three of the following variables to <empty> in
-# a .conf file (this will allow ldbm to be build with gdbm).
-OPENLDAP_OPTION_bdb   ?= "--enable-bdb=mod"
-OPENLDAP_DEPENDS_bdb  ?= "db"
-OPENLDAP_PACKAGE_bdb  ?= "${PN}-backend-bdb"
-FILES_${PN}-backend-bdb = "${md}/back_bdb.so ${md}/back_bdb.la ${md}/back_bdb-*.so.*"
-EXTRA_OECONF += "${OPENLDAP_OPTION_bdb}"
-DEPENDS += "${OPENLDAP_DEPENDS_bdb}"
-PACKAGES += "${OPENLDAP_PACKAGE_bdb}"
-#
-#--enable-dnssrv       enable dnssrv backend no|yes|mod no
-# This has no dependencies.
-FILES_${PN}-backend-dnssrv = "${md}/back_dnssrv.so ${md}/back_dnssrv.la ${md}/back_dnssrv-*.so.*"
-EXTRA_OECONF += "--enable-dnssrv=mod"
-PACKAGES += "${PN}-backend-dnssrv"
-#
-#--enable-hdb          enable Hierarchical DB backend no|yes|mod no
-# This forces ldbm to use Berkeley too, remove to use gdbm
-OPENLDAP_OPTION_hdb   ?= "--enable-hdb=mod"
-OPENLDAP_DEPENDS_hdb  ?= "db"
-OPENLDAP_PACKAGE_hdb  ?= "${PN}-backend-hdb"
-FILES_${PN}-backend-hdb = "${md}/back_hdb.so ${md}/back_hdb.la ${md}/back_hdb-*.so.*"
-EXTRA_OECONF += "${OPENLDAP_OPTION_hdb}"
-DEPENDS += "${OPENLDAP_DEPENDS_hdb}"
-PACKAGES += "${OPENLDAP_PACKAGE_hdb}"
-#
-#--enable-ldap         enable ldap backend no|yes|mod no
-# This has no dependencies
-EXTRA_OECONF += "--enable-ldap=mod"
-FILES_${PN}-backend-ldap = "${md}/back_ldap.so ${md}/back_ldap.la ${md}/back_ldap-*.so.*"
-PACKAGES += "${PN}-backend-ldap"
-#
-#--enable-ldbm         enable ldbm backend no|yes|mod no
-# ldbm requires further specification of the underlying database API, because
-# bdb is enabled above this must be set to berkeley, however the config
-# defaults this correctly so --with-ldbm-api is *not* set.  The build will
-# fail if bdb is removed (above) but not database is built to provide the
-# support for ldbm (because the 'DEPENDS_ldbm' is empty below.)
-#
-# So to use gdbm set:
-#OPENLDAP_OPTION_ldbm = "--enable-ldbm=mod --with-ldbm-api=gdbm"
-#OPENLDAP_DEPENDS_ldbm = gdbm
-# And clear the bdb and hdb settings.
-OPENLDAP_OPTION_ldbm ?= "--enable-ldbm=mod"
-OPENLDAP_DEPENDS_ldbm ?= ""
-OPENLDAP_PACKAGES_ldbm ?= "${PN}-backend-ldbm"
-FILES_${PN}-backend-ldbm = "${md}/back_ldbm.so ${md}/back_ldbm.la ${md}/back_ldbm-*.so.*"
-EXTRA_OECONF += "${OPENLDAP_OPTION_ldbm}"
-DEPENDS += "${OPENLDAP_DEPENDS_ldbm}"
-PACKAGES += "${PN}-backend-ldbm"
-#
-#--enable-meta         enable metadirectory backend no|yes|mod no
-# No dependencies
-EXTRA_OECONF += "--enable-meta=mod"
-FILES_${PN}-backend-meta = "${md}/back_meta.so ${md}/back_meta.la ${md}/back_meta-*.so.*"
-PACKAGES += "${PN}-backend-meta"
-#
-#--enable-monitor      enable monitor backend no|yes|mod yes
-EXTRA_OECONF += "--enable-monitor=mod"
-FILES_${PN}-backend-monitor = "${md}/back_monitor.so ${md}/back_monitor.la ${md}/back_monitor-*.so.*"
-PACKAGES += "${PN}-backend-monitor"
-#
-#--enable-null         enable null backend no|yes|mod no
-EXTRA_OECONF += "--enable-null=mod"
-FILES_${PN}-backend-null = "${md}/back_null.so ${md}/back_null.la ${md}/back_null-*.so.*"
-PACKAGES += "${PN}-backend-null"
-#
-#--enable-passwd       enable passwd backend no|yes|mod no
-EXTRA_OECONF += " --enable-passwd=mod"
-FILES_${PN}-backend-passwd = "${md}/back_passwd.so ${md}/back_passwd.la ${md}/back_passwd-*.so.*"
-PACKAGES += "${PN}-backend-passwd"
-#
-#--enable-perl         enable perl backend no|yes|mod no
-#  This requires a loadable perl dynamic library, if enabled without
-#  doing something appropriate (building perl?) the build will pick
-#  up the build machine perl - not good.
-OPENLDAP_OPTION_perl ?= "--enable-perl=mod"
-OPENLDAP_DEPENDS_perl ?= "perl"
-OPENLDAP_PACKAGES_perl ?= "${PN}-backend-perl"
-FILES_${PN}-backend-perl = "${md}/back_perl.so ${md}/back_perl.la ${md}/back_perl-*.so.*"
-#EXTRA_OECONF += "${OPENLDAP_OPTION_perl}"
-#DEPENDS += "${OPENLDAP_DEPENDS_perl}"
-#PACKAGES += "${PN}-backend-perl"
-#
-#--enable-shell        enable shell backend no|yes|mod no
-EXTRA_OECONF += "--enable-shell=mod"
-FILES_${PN}-backend-shell = "${md}/back_shell.so ${md}/back_shell.la ${md}/back_shell-*.so.*"
-PACKAGES += "${PN}-backend-shell"
-#
-#--enable-sql          enable sql backend no|yes|mod no
-# sql requires some sql backend which provides sql.h, sqlite* provides
-# sqlite.h (which may be compatible but hasn't been tried.)
-OPENLDAP_OPTION_sql ?= "--enable-sql=mod"
-OPENLDAP_DEPENDS_sql ?= "sql"
-OPENLDAP_PACKAGES_sql ?= "${PN}-backend-sql"
-FILES_${PN}-backend-sql = "${md}/back_sql.so ${md}/back_sql.la ${md}/back_sql-*.so.*"
-#EXTRA_OECONF += "${OPENLDAP_OPTION_sql}"
-#DEPENDS += "${OPENLDAP_DEPENDS_sql}"
-#PACKAGES += "${PN}-backend-sql"
-#
-#--enable-dyngroup     Dynamic Group overlay no|yes|mod no
-#  This is a demo, Proxy Cache defines init_module which conflicts with the
-#  same symbol in dyngroup
-#EXTRA_OECONF += "--enable-dyngroup=mod"
-#FILES_${PN}-overlay-dyngroup = "${md}/back_dyngroup.so ${md}/back_dyngroup.la ${md}/back_dyngroup-*.so.*"
-#PACKAGES += "${PN}-overlay-dyngroup"
-#
-#--enable-proxycache   Proxy Cache overlay no|yes|mod no
-EXTRA_OECONF += "--enable-proxycache=mod"
-FILES_${PN}-overlay-proxycache = "${md}/pcache.so ${md}/pcache.la ${md}/pcache-*.so.*"
-PACKAGES += "${PN}-overlay-proxycache"
-#
-# LOCAL OPTION OVERRIDES
-# The distro/lcoal options must be added in *last*
-EXTRA_OECONF += "${OPENLDAP_OPTIONS}"
-DEPENDS      += "${OPENLDAP_DEPENDS}"
-
-do_stage() {
-	autotools_stage_includes
-	# Install the -2.2 versions, but link foo.so to foo-2.2.so ONLY
-	# if the do not exist!
-	oe_libinstall -so -C libraries/libldap/.libs libldap-2.2 ${STAGING_LIBDIR}
-	test -e ${STAGING_LIBDIR}/libldap.so ||
-		ln -s $(basename ${STAGING_LIBDIR}/libldap-2.2.so.*.*.*) ${STAGING_LIBDIR}/libldap.so
-	oe_libinstall -so -C libraries/libldap_r/.libs libldap_r-2.2 ${STAGING_LIBDIR}
-	test -e ${STAGING_LIBDIR}/libldap_r.so ||
-		ln -s $(basename ${STAGING_LIBDIR}/libldap_r-2.2.so.*.*.*) ${STAGING_LIBDIR}/libldap_r.so
-	oe_libinstall -so -C libraries/liblber/.libs liblber-2.2 ${STAGING_LIBDIR}
-	test -e ${STAGING_LIBDIR}/liblber.so ||
-		ln -s $(basename ${STAGING_LIBDIR}/liblber-2.2.so.*.*.*) ${STAGING_LIBDIR}/liblber.so
-}
-
-LEAD_SONAME = "libldap-2.2.so.*"
-
-# The executables go in a separate package.  This allows the
-# installation of the libraries with no daemon support.
-# Each module also has its own package - see above.
-PACKAGES += "${PN}-slapd ${PN}-slurpd ${PN}-bin"
-
-# Package contents - shift most standard contents to -bin
-FILES_${PN} = "${libdir}/lib*.so.* ${sysconfdir}/openldap/ldap.* ${localstatedir}/openldap-data"
-FILES_${PN}-slapd = "${libexecdir}/slapd ${sbindir} ${datadir}/openldap/ucdata \
-	${localstatedir}/run ${sysconfdir}/openldap/slapd.* ${sysconfdir}/openldap/schema"
-FILES_${PN}-slurpd = "${libexecdir}/slurpd ${localstatedir}/openldap-slurp ${localstatedir}/run"
-FILES_${PN}-bin = "${bindir}"
-FILES_${PN}-dev = "${includedir} ${libdir}/lib*.so ${libdir}/*.la ${libdir}/*.a ${libexecdir}/openldap/*.a"
-
-# Run ucgendat, and remove it.
-# This is a painful and annoying way around the use of machine-generated
-# tables within the build.  The alternative is to rewrite the ucgendat
-# stuff and associated liblunicode code to use machine-independent data
-# files - the current code seems to at least assume byte sex.
-DATFILES = "case.dat cmbcl.dat comp.dat ctype.dat decomp.dat num.dat kdecomp.dat"
-pkg_postinst_openldap-slapd() {
-test -n "${DESTDIR}" -o "${BUILD_ARCH}" = "${HOST_ARCH}" || (
-	cd "${datadir}/${PN}/ucdata" &&
-	./ucgendat UnicodeData.txt -x CompositionExclusions.txt &&
-	# This saves about 1MByte
-	rm ucgendat UnicodeData.txt CompositionExclusions.txt
-)
-}
-pkg_prerm_openldap-slapd() {
-test "${BUILD_ARCH}" = "${HOST_ARCH}" || (
-	cd "${datadir}/${PN}/ucdata" && rm ${DATFILES}
-)
-}
-
-SRC_URI[md5sum] = "6c4c72a1336aa45b463e738034c078d6"
-SRC_URI[sha256sum] = "82ed5a27d2b340826b2e10625e687627ccefc883a426314952e4a253d5a6af29"