rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

6 files changed, 1302 insertions, 0 deletions

diff --git a/recipes/omniorb/files/arm_double.patch b/recipes/omniorb/files/arm_double.patch
new file mode 100644
index 0000000000..cfcfd41630
--- /dev/null
+++ b/recipes/omniorb/files/arm_double.patch
@@ -0,0 +1,266 @@
+--- include/omniORB4/CORBA_sysdep.h	30 Dec 2005 17:40:22 -0000	1.2.2.32
++++ include/omniORB4/CORBA_sysdep.h	12 Apr 2006 16:55:41 -0000
+@@ -125,6 +125,15 @@
+ #endif
+ 
+ //
++// Processor dependencies
++//
++
++#if defined(__arm__)
++#  define OMNI_MIXED_ENDIAN_DOUBLE
++#endif
++
++
++//
+ // Macro to provide const_cast functionality on all platforms.
+ //
+ #ifdef HAS_Cplusplus_const_cast
+--- include/omniORB4/cdrStream.h	22 Jul 2005 16:57:17 -0000	1.1.2.23
++++ include/omniORB4/cdrStream.h	12 Apr 2006 16:55:41 -0000
+@@ -428,6 +428,13 @@
+       m.l[1] = Swap32(l.l[0]);
+       l = m;
+     }
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++    {
++      _CORBA_ULong v = l.l[0];
++      l.l[0] = l.l[1];
++      l.l[1] = v;
++    }
++#endif
+     CdrMarshal(s,LongArray2,omni::ALIGN_8,l);
+   }
+ 
+@@ -440,6 +447,13 @@
+       m.l[1] = Swap32(l.l[0]);
+       l = m;
+     }
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++    {
++      _CORBA_ULong v = l.l[0];
++      l.l[0] = l.l[1];
++      l.l[1] = v;
++    }
++#endif
+     convertToFloat(_CORBA_Double, LongArray2);
+   }
+ #else
+@@ -791,6 +805,19 @@
+         p[i] = l;
+       }
+     }
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++    {
++      struct LongArray2 {
++        _CORBA_ULong l[2];
++      };
++      LongArray2* p=(LongArray2*)a;
++      for( int i = 0; i < length; i++ ) {
++        _CORBA_ULong v = p[i].l[0];
++	p[i].l[0] = p[i].l[1];
++	p[i].l[1] = v;
++      }
++    }
++#endif
+   }
+ #endif
+ 
+@@ -957,6 +984,13 @@
+     m.l[1] = Swap32(l.l[0]);
+     l = m;
+   }
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++  {
++    _CORBA_ULong v = l.l[0];
++    l.l[0] = l.l[1];
++    l.l[1] = v;
++  }
++#endif
+   CdrMarshal(s,LongArray2,omni::ALIGN_8,l);
+ }
+ 
+@@ -969,6 +1003,13 @@
+     m.l[1] = Swap32(l.l[0]);
+     l = m;
+   }
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++  {
++    _CORBA_ULong v = l.l[0];
++    l.l[0] = l.l[1];
++    l.l[1] = v;
++  }
++#endif
+   convertToFloat(_CORBA_Double, LongArray2);
+ }
+ 
+--- include/omniORB4/seqTemplatedecls.h	11 Oct 2005 13:17:01 -0000	1.1.2.10
++++ include/omniORB4/seqTemplatedecls.h	12 Apr 2006 16:55:42 -0000
+@@ -544,43 +544,6 @@
+ };
+ 
+ 
+-
+-//////////////////////////////////////////////////////////////////////
+-///////////// _CORBA_Sequence_w_FixSizeElement           /////////////
+-//////////////////////////////////////////////////////////////////////
+-template <class T,int elmSize,int elmAlignment>
+-class _CORBA_Sequence_w_FixSizeElement : public _CORBA_Sequence<T> {
+-protected:
+-  typedef _CORBA_Sequence_w_FixSizeElement<T,elmSize,elmAlignment>  T_seq;
+-  typedef _CORBA_Sequence<T> Base_T_seq ;
+-
+-
+-  inline _CORBA_Sequence_w_FixSizeElement() {}
+-
+-  inline _CORBA_Sequence_w_FixSizeElement(_CORBA_ULong max,
+-					  _CORBA_Boolean bounded=0) :
+-    Base_T_seq(max,bounded) {}
+-
+-  inline _CORBA_Sequence_w_FixSizeElement(const T_seq& s) : Base_T_seq(s) {}
+-
+-  inline _CORBA_Sequence_w_FixSizeElement(_CORBA_ULong max,
+-					  _CORBA_ULong len,
+-					  T           *value,
+-					  _CORBA_Boolean release_ = 0,
+-					  _CORBA_Boolean bounded = 0
+-	       )  : Base_T_seq(max,len,value,release_,bounded) {}
+-
+-  inline T_seq &operator= (const T_seq &s) {
+-    Base_T_seq::operator= (s);
+-    return *this;
+-  }
+-
+-public:
+-  inline void operator>>= (cdrStream &s) const;
+-  inline void operator<<= (cdrStream &s);
+-};
+-
+-
+ //////////////////////////////////////////////////////////////////////
+ ///////////// _CORBA_Unbounded_Sequence_w_FixSizeElement /////////////
+ //////////////////////////////////////////////////////////////////////
+@@ -663,6 +626,46 @@
+ };
+ 
+ 
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++
++template <int max>
++class _CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8> : 
++  public _CORBA_Bounded_Sequence<_CORBA_Double,max> {
++public:
++  typedef _CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8> T_seq;
++  typedef _CORBA_Bounded_Sequence<_CORBA_Double,max> Base_T_seq;
++
++
++  inline _CORBA_Bounded_Sequence_w_FixSizeElement() {}
++  inline _CORBA_Bounded_Sequence_w_FixSizeElement(_CORBA_ULong   len,
++						  _CORBA_Double  *value,
++						  _CORBA_Boolean rel = 0) : 
++    Base_T_seq(len,value,rel) {}
++
++  inline _CORBA_Bounded_Sequence_w_FixSizeElement(const T_seq& s) : 
++    Base_T_seq(s) {}
++
++  inline ~_CORBA_Bounded_Sequence_w_FixSizeElement() {}
++
++  inline T_seq& operator=(const T_seq& s) {
++    Base_T_seq::operator= (s);
++    return *this;
++  }
++
++  // CORBA 2.3 additions
++
++  inline void replace(_CORBA_ULong len, _CORBA_Double* data,_CORBA_Boolean release_ = 0) {
++    Base_T_seq::replace(len,data,release_);
++  }
++
++  inline void operator>>= (cdrStream &s) const;
++  inline void operator<<= (cdrStream &s);
++};
++
++#endif
++
++
++
+ //////////////////////////////////////////////////////////////////////
+ ////////////////// _CORBA_Sequence_Char  /////////////////////////////
+ //////////////////////////////////////////////////////////////////////
+--- include/omniORB4/seqTemplatedefns.h	22 May 2003 13:41:39 -0000	1.1.2.11
++++ include/omniORB4/seqTemplatedefns.h	12 Apr 2006 16:55:42 -0000
+@@ -266,6 +266,48 @@
+ }
+ 
+ //////////////////////////////////////////////////////////////////////
++#ifdef OMNI_MIXED_ENDIAN_DOUBLE
++
++// Template member function specializations to use the base
++// marshalling functions for double, so the doubles are properly
++// word-swapped.
++
++template<>
++inline
++void
++_CORBA_Unbounded_Sequence_w_FixSizeElement<_CORBA_Double,8,8>::operator>>= (cdrStream& s) const
++{
++  Base_T_seq::operator>>=(s);
++}
++
++template<>
++inline
++void
++_CORBA_Unbounded_Sequence_w_FixSizeElement<_CORBA_Double,8,8>::operator<<= (cdrStream& s)
++{
++  Base_T_seq::operator<<=(s);
++}
++
++template<int max>
++inline
++void
++_CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8>::operator>>= (cdrStream& s) const
++{
++  Base_T_seq::operator>>=(s);
++}
++
++template<int max>
++inline
++void
++_CORBA_Bounded_Sequence_w_FixSizeElement<_CORBA_Double,max,8,8>::operator<<= (cdrStream& s)
++{
++  Base_T_seq::operator<<=(s);
++}
++
++#endif
++
++
++//////////////////////////////////////////////////////////////////////
+ inline
+ void
+ _CORBA_Sequence_Char::operator>>= (cdrStream& s) const
+--- src/lib/omniORB/omniidl_be/cxx/skutil.py	27 Jul 2003 19:24:32 -0000	1.17.2.10
++++ src/lib/omniORB/omniidl_be/cxx/skutil.py	12 Apr 2006 16:55:42 -0000
+@@ -197,6 +197,11 @@
+         if array_marshal_helpers.has_key(d_type.type().kind()):
+             (alignment,elmsize) = array_marshal_helpers[d_type.type().kind()]
+             if alignment != "omni::ALIGN_1":
++                is_double = d_type.type().kind() == idltype.tk_double
++                if is_double:
++                    to.out("""
++#ifndef OMNI_MIXED_ENDIAN_DOUBLE""")
++
+                 to.out("""\
+ if (! @where@.marshal_byte_swap()) {
+   @where@.put_octet_array((CORBA::Octet*)(@slice_cast@@name@),@num@,@align@);
+@@ -207,6 +212,11 @@
+                        slice_cast = slice_cast,
+                        num = str(n_elements * elmsize),
+                        align = alignment)
++
++                if is_double:
++                    to.out("""\
++#endif""")
++
+                 # Do not return here.
+                 # let the code below to deal with the else block.
+             else:
diff --git a/recipes/omniorb/files/dynskel.patch b/recipes/omniorb/files/dynskel.patch
new file mode 100644
index 0000000000..469d3eb45e
--- /dev/null
+++ b/recipes/omniorb/files/dynskel.patch
@@ -0,0 +1,49 @@
+--- src/lib/omniORB/omniidl_be/cxx/dynskel/main.py	27 Nov 2001 14:37:25 -0000	1.14.2.10
++++ src/lib/omniORB/omniidl_be/cxx/dynskel/main.py	15 May 2006 13:36:20 -0000
+@@ -474,15 +474,30 @@
+ 
+     elementDesc = output.StringStream()
+     prefix = config.state['Private Prefix']
++
+     # djr and jnw's "Super-Hacky Optimisation"
+     # (amended by dpg1 to be even more hacky, since char/wchar now don't work)
+-    if isinstance(d_seqType.type(), idltype.Base) and \
+-       not d_seqType.variable() and \
+-       not d_seqType.type().kind() in [idltype.tk_char, idltype.tk_wchar] and \
+-       not is_array:
++    # (amended again to cope with mixed endian doubles)
++
++    is_double     = d_seqType.type().kind() == idltype.tk_double
++    is_contiguous = (isinstance(d_seqType.type(), idltype.Base) and
++                     not d_seqType.variable() and
++                     not d_seqType.type().kind() in [idltype.tk_char,
++                                                     idltype.tk_wchar] and
++                     not is_array)
++
++    if is_double:
++        elementDesc.out("""
++#ifndef OMNI_MIXED_ENDIAN_DOUBLE""")
++        
++    if is_contiguous:
+         elementDesc.out(template.sequence_elementDesc_contiguous,
+                         sequence = sequence_desc)
+-    else:
++    if is_double:
++        elementDesc.out("""
++#else""")
++    
++    if is_double or not is_contiguous:
+         # <---
+         required_symbols = [ prefix + "_buildDesc" + seqType_cname ]
+         assertDefined(required_symbols)
+@@ -492,6 +507,10 @@
+                         thing_cname = seqType_cname,
+                         thing = thing)
+ 
++    if is_double:
++        elementDesc.out("""
++#endif""")
++
+     # <---
+     cname = memberType_cname
+     # this is the #ifdef guard
diff --git a/recipes/omniorb/files/omniORB-cross.patch b/recipes/omniorb/files/omniORB-cross.patch
new file mode 100644
index 0000000000..3206af2b7a
--- /dev/null
+++ b/recipes/omniorb/files/omniORB-cross.patch
@@ -0,0 +1,31 @@
+*** omniORB-4.0.5/mk/beforeauto.mk.in   2004-10-17 20:44:56.000000000 -0400
+--- omniORB-4.0.5.new/mk/beforeauto.mk.in       2005-03-21 12:33:05.756947025 -0500
+***************
+*** 48,59 ****
+  #
+  # Tool bindir to use depends on make target
+  #
+  ifeq ($(MAKECMDGOALS),install)
+    TOOLBINDIR = $(INSTALLBINDIR)
+  else
+    TOOLBINDIR = $(TOP)/$(BINDIR)
+  endif
+!
+
+  #############################################################################
+  #
+--- 48,60 ----
+  #
+  # Tool bindir to use depends on make target
+  #
++ ifndef TOOLBINDIR
+  ifeq ($(MAKECMDGOALS),install)
+    TOOLBINDIR = $(INSTALLBINDIR)
+  else
+    TOOLBINDIR = $(TOP)/$(BINDIR)
+  endif
+! endif
+
+  #############################################################################
+  #
+
diff --git a/recipes/omniorb/files/omniORB.cfg b/recipes/omniorb/files/omniORB.cfg
new file mode 100644
index 0000000000..c1c8c24f95
--- /dev/null
+++ b/recipes/omniorb/files/omniORB.cfg
@@ -0,0 +1,918 @@
+############################################################################
+#           omniORB (4.0 or above) configuration file                      #
+############################################################################
+
+############################################################################
+############################################################################
+############################################################################
+#                                                                          #
+#            ORB wide options                                              #
+#                                                                          #
+############################################################################
+
+############################################################################
+# Tracing level
+#     level 0 -  critical errors only
+#     level 1 -  informational messages only
+#     level 2 -  configuration information and warnings
+#     level 5 -  the above plus report server thread creation and
+#                communication socket shutdown
+#     level 10 - the above plus execution trace messages
+#     level 25 - output trace message per send or receive giop message
+#     level 30 - dump up to 128 bytes of a giop message
+#     level 40 - dump the complete giop message
+#
+#     Valid values = (n >= 0)
+#
+
+#traceLevel = 1
+
+############################################################################
+# Trace Exceptions
+#     If true, then system exceptions will be logged when they are thrown.
+#
+#     Valid values = 0 or 1
+#
+traceExceptions = 0
+
+############################################################################
+# Trace Invocations
+#     If true, then each local and remote invocation will generate a trace 
+#     message.
+#
+#     Valid values = 0 or 1
+#
+traceInvocations = 0
+
+############################################################################
+# Trace thread id
+#     If true, all trace messages include the thread id of the thread doing
+#     the logging.
+#
+#     Valid values = 0 or 1
+#
+traceThreadId = 0
+
+############################################################################
+# dumpConfiguration
+#     Set to 1 to cause the ORB to dump the current set of configuration
+#     parameters.
+#
+#     Valid values = 0 or 1
+#
+dumpConfiguration = 0
+
+############################################################################
+# maxGIOPVersion
+#
+#   Set the maximum GIOP version the ORB should support. The ORB tries
+#   to match the <major>.<minor> version as specified.
+#
+#   Valid values = 1.0 | 1.1 | 1.2
+#
+maxGIOPVersion = 1.2
+
+############################################################################
+# giopMaxMsgSize
+#
+#    This value defines the ORB-wide limit on the size of GIOP message 
+#    (excluding the header). If this limit is exceeded, the ORB will
+#    refuse to send or receive the message and raise a MARSHAL exception.
+#
+#    Valid values = (n >= 8192)
+#
+giopMaxMsgSize = 2097152    # 2 MBytes.
+
+############################################################################
+# strictIIOP flag
+#    Enable vigorous check on incoming IIOP messages
+#
+#    In some (sloppy) IIOP implementations, the message size value in
+#    the header can be larger than the actual body size, i.e. there is
+#    garbage at the end. As the spec does not say the message size
+#    must match the body size exactly, this is not a clear violation
+#    of the spec.
+#
+#    If this flag is non-zero, the incoming message is expected to
+#    be well-behaved. Any messages that have garbage at the end will
+#    be rejected.
+#    
+#    The default value of this flag is true, so invalid messages are
+#    rejected. If you set it to zero, the ORB will silently skip the
+#    unread part. The problem with this behaviour is that the header
+#    message size may actually be garbage, caused by a bug in the
+#    sender's code. The receiving thread may block forever on the
+#    strand as it tries to read more data from it. In this case the
+#    sender won't send any more as it thinks it has marshalled in all
+#    the data.
+#
+#    Valid values = 0 or 1
+#
+strictIIOP = 1
+
+############################################################################
+# lcdMode
+#
+#   Set to 1 to enable 'Lowest Common Denominator' Mode.
+#   This will disable various features of IIOP and GIOP which are
+#   poorly supported by some ORBs, and disable warnings/errors when
+#   certain types of erroneous message are received on the wire.
+#
+#   Valid values = 0 or 1
+#
+lcdMode = 0
+
+############################################################################
+# tcAliasExpand flag
+#
+#    This flag is used to indicate whether TypeCodes associated with Anys
+#    should have aliases removed. This functionality is included because
+#    some ORBs will not recognise an Any containing a TypeCode with
+#    aliases to be the same as the actual type contained in the Any. Note
+#    that omniORB will always remove top-level aliases, but will not remove
+#    aliases from TypeCodes that are members of other TypeCodes (e.g.
+#    TypeCodes for members of structs etc.), unless tcAliasExpand is set to 1.
+#    There is a performance penalty when inserting into an Any if 
+#    tcAliasExpand is set to 1. The default value is 0 (i.e. aliases of
+#    member TypeCodes are not expanded). Note that aliases won't be expanded
+#    when one of the non-type-safe methods of inserting into an Any is
+#    used (i.e. when the replace() member function or non - type-safe Any
+#    constructor is used. )
+#
+#     Valid values = 0 or 1
+#
+tcAliasExpand = 0
+
+############################################################################
+# useTypeCodeIndirections
+#
+#    If true (the default), typecode indirections will be used. Set
+#    this to false to disable that. Setting this to false might be
+#    useful to interoperate with another ORB implementation that cannot
+#    handle indirections properly.
+#   
+#    Valid values = 0 or 1
+useTypeCodeIndirections = 1
+
+############################################################################
+# acceptMisalignedTcIndirections
+#
+#    If true, try to fix a mis-aligned indirection in a typecode. This
+#    is used to work around a bug in some versions of Visibroker's Java
+#    ORB.
+#   
+#    Valid values = 0 or 1
+acceptMisalignedTcIndirections = 0
+
+############################################################################
+# scanGranularity
+#
+#   The granularity at which the ORB scans for idle connections.
+#   This value determines the minimum value that inConScanPeriod or
+#   outConScanPeriod can be.
+#
+#   Valid values = (n >= 0 in seconds) 
+#                   0 --> do not scan for idle connections.
+#
+scanGranularity = 5
+
+############################################################################
+# nativeCharCodeSet
+#
+#   set the native code set for char and string
+#
+nativeCharCodeSet = ISO-8859-1
+
+############################################################################
+# nativeWCharCodeSet
+#
+#   set the native code set for wchar and wstring
+#
+nativeWCharCodeSet = UTF-16
+
+############################################################################
+# omniORB_27_CompatibleAnyExtraction
+#
+#   In omniORB pre-2.8.0 versions, the CORBA::Any extraction operator for
+#     1. unbounded string operator>>=(char*&)
+#     2. bounded string   operator>>=(to_string)
+#     3. object reference operator>>=(A_ptr&) for interface A
+#   Return a copy of the value. The caller must free the returned
+#   value later.
+#
+#   With 2.8.0 and later, the semantics becomes non-copy, i.e. the Any
+#   still own the storage of the returned value.
+#   This would cause a problem in a program that is written to use the
+#   pre-2.8.0 semantics. To make it easier for the transition,
+#   set omniORB_27_CompatibleAnyExtraction to 1.
+#   This would revert the semantics to the pre-2.8.0 versions.
+#
+#   Valid values = 0 or 1
+#
+omniORB_27_CompatibleAnyExtraction = 0
+
+############################################################################
+# abortOnInternalError
+#
+#   If the value of this variable is TRUE then the ORB will abort
+#   instead of throwing an exception when a fatal internal error is
+#   detected. This is useful for debuging the ORB -- as the stack will
+#   not be unwound by the exception handler, so a stack trace can be
+#   obtained.
+#   It is hoped that this will not often be needed by users of omniORB!
+#
+#   Valid values = 0 or 1
+#
+abortOnInternalError = 0
+
+############################################################################
+# abortOnNativeException
+#
+#   On Windows, "native" exceptions such as segmentation faults and
+#   divide by zero appear as C++ exceptions that can be caught with
+#   catch (...). Setting this parameter to TRUE causes such exceptions
+#   to abort the process instead.
+#
+#   This parameter has no effect on other platforms.
+#
+#   Valid values = 0 or 1
+#
+abortOnNativeException = 0
+
+############################################################################
+# maxSocketSend
+# maxSocketRecv
+#
+#   On some platforms, calls to send() and recv() have a limit on the
+#   buffer size that can be used. These parameters set the limits in
+#   bytes that omniORB uses when sending / receiving bulk data.
+#
+#   The default values are platform specific. It is unlikely that you
+#   will need to change the values from the defaults.
+#
+#   The minimum valid limit is 8KB, 8192 bytes.
+#
+#   e.g. to limit to 64KB sends / receives:
+#
+#     maxSocketSend = 65536
+#     maxSocketRecv = 65536
+
+############################################################################
+# sslCAFile
+# sslKeyFile
+# sslKeyPassword
+# sslVerifyMode
+#
+#   SSL transport options
+#
+#   sslCAFile specifies the file containing the SSL Certificate
+#   Authority certificate.
+#
+#   sslKeyFile specifies the file containing the SSL key.
+#
+#   sslKeyPassword specifies the password to unlock the key.
+#
+#   sslVerifyMode specifies the verify mode, as given to
+#   SSL_CTX_set_verify. Valid values are "none", representing
+#   SSL_VERIFY_NONE, and "peer", representing SSL_VERIFY_PEER. If peer
+#   is selected, additional options "fail" and "once" can also be
+#   specified, corresponding to SSL_VERIFY_FAIL_IF_NO_PEER_CERT and
+#   SSL_VERIFY_CLIENT_ONCE respectively. e.g.
+#
+#     sslVerifyMode = peer,fail
+#
+#   These options are only available if the SSL transport is linked.
+
+
+############################################################################
+############################################################################
+############################################################################
+#                                                                          #
+#            Client Side Options                                           #
+#                                                                          #
+############################################################################
+
+############################################################################
+# InitRef
+#
+#   Specify the objects the ORB should return in response to calls to
+#   resolve_initial_references.
+#
+#   There can be more than one configuration line defining InitRef.
+#   Each line adds one initial reference to the ORB.
+#
+#   Here are some valid examples:
+#
+#   Specify the root context of the Naming Service. (Notice the end of line
+#   continuation marker '\'
+#
+#   InitRef = NameService=IOR:010000002800000049444c3a6f6d672e6f72672f436f734\
+#e616d696e672f4e616d696e67436f6e746578743a312e300001000000000000002c000000010\
+#102000c0000003139322e3136382e312e3000f90a00000c000000349568c45cb1e6780000000\
+#100000000
+#
+#   Alternatively, and more cleanly, specify the Naming service with a
+#   corbaname URI:
+#
+InitRef = NameService=corbaname::localhost
+#
+#
+#   Specify the Trading service and the interface repository using corbaloc:
+#
+#   InitRef = TradingService=corbaloc:iiop:marrow:5009/MyObjectKey
+#           = InterfaceRepository=corbaloc::1.2@marrow:5009/Intf
+#
+#   The default for the set of initial references is empty.
+
+############################################################################
+# DefaultInitRef
+#
+#   DefaultInitRef provides a prefix string which is used to resolve 
+#   otherwise unknown names. When resolve_initial_references() is unable to 
+#   resolve a name which has been specifically configured (with InitRef),
+#   it constructs a string consisting of the default prefix, a `/' character,
+#   and the name requested. The string is then fed to string_to_object().
+#   For example, if DefaultInitRef is set up like this:
+#      DefaultInitRef = corbaloc::myhost.example.com
+#   A call to resolve_initial_references("MyService") will return the object
+#   reference denoted by `corbaloc::myhost.example.com/MyService'.
+#
+#   The default is empty.
+
+
+############################################################################
+# clientTransportRule
+#
+#    When the client receives an IOR that defines 1 or more ways to contact
+#    the server, the rules in clientTransportRule filter and prioritise
+#    the order in which the transports are used. 
+#
+#    There can be more than one configuration line of this type.
+#    Each line adds one rule to the selection process. The rules are applied
+#    in the order they are defined. The relative positions of the rules define
+#    the relative priority. The first rule has the highest priority.
+#
+#    The syntax of a rule is as follows:
+#    clientTransportRule =  [^]<address mask>      [action]+
+#
+#        <address mask> can be:
+#            1. localhost            the address is this machine
+#            2. w.x.y.z/m1.m2.m3.m4  IPv4 address with the bits selected by
+#                                    the mask. e.g. 172.16.0.0/255.240.0.0
+#            3. *                    the wildcard that matches any address
+#
+#        <action>+ can be one or more of the following:
+#            1. none              Do not use this address
+#            2. tcp,ssl,unix      Use the 3 transports in the specified order 
+#                                 if any or all of them are available
+#            3. bidir             Any connection to this address should be
+#                                 used bidirectionally.
+#
+#         The optional prefix ^ before <address mask>, if present, causes
+#         the ORB to remove previously declared clientTransportRules from
+#         its internal store before adding the current rule.
+#
+#    By default, no rule is defined. The ORB implicitly uses the following
+#    rule:
+#        clientTransportRule =     *   unix,tcp,ssl
+#    If any rule is specified, no implicit rule will be applied.
+#
+#    Given an IOR, for each of the addresses within it, the ORB matches the
+#    address to the rules. If one is found, the position of the matched rule
+#    and the action is noted. If the action is none, the address is discarded.
+#    If the action does not contain the transport the address is specified for,
+#    e.g. the action is "ssl" but the address is "tcp", the address is 
+#    discarded. Otherwise, the address and action is entered as one of the
+#    candidates to use. Having gone through all the addresses, the candidiates
+#    available are then ordered based on the priority of the matching rules and
+#    used accordingly.
+#
+#    Here are some example usages:
+#
+#    A) Restrict to only contacting server on the same host:
+#           clientTransportRule = localhost      unix,tcp
+#                               =   *            none
+#    B) Use tcp to contact servers in the intranet and must use bidirectional
+#       ssl otherwise.
+#           clientTransportRule = 172.16.0.0/255.240.0.0  unix,tcp
+#                               =            *            bidir,ssl
+#    C) When a fast network (192.168.1.0) exists in the cluster, use it in
+#       preference to the external network.
+#           clientTransportRule = 192.168.1.0/255.255.255.0  unix,tcp
+#           clientTransportRule = 172.16.0.0/255.240.0.0     unix,tcp
+#                               =       *                    none
+#     
+#             
+
+############################################################################
+# clientCallTimeOutPeriod
+#
+#    Call timeout. On the client side, if a remote call takes longer
+#    than the timeout value, the ORB will shutdown the connection and
+#    raise a COMM_FAILURE.
+#
+#    Valid values = (n >= 0 in milliseconds) 
+#                    0 --> no timeout. Block till a reply comes back
+#
+clientCallTimeOutPeriod = 0
+
+############################################################################
+# supportPerThreadTimeOut
+#
+#    If true, each client thread may have its own timeout. This adds
+#    some overhead to each call, so it is off by default.
+#
+#    Valid values = 0 or 1
+#
+supportPerThreadTimeOut = 0
+
+############################################################################
+# outConScanPeriod
+#
+#   Idle connections shutdown. The ORB periodically scans all the
+#   outgoing connections to detect if they are idle.
+#   If no operation has passed through a connection for a scan period,
+#   the ORB would treat this connection idle and shut it down.
+#
+#   Valid values = (n >= 0 in seconds) 
+#                   0 --> do not close idle connections.
+#
+outConScanPeriod = 120
+
+############################################################################
+# maxGIOPConnectionPerServer
+#
+#   The ORB could open more than one connection to a server
+#   depending on the number of concurrent invocations to the same
+#   server. This variable decides the maximum number of connections 
+#   to use per server. This variable is read only once at ORB_init.
+#   If the number of concurrent invocations exceeds this number, the
+#   extra invocations are blocked until the the outstanding ones
+#   return.
+#
+#   Valid values = (n >= 1) 
+#
+maxGIOPConnectionPerServer = 5
+
+############################################################################
+# oneCallPerConnection
+#
+#   1 means only one call can be in progress at any time per connection.
+#
+#   Valid values = 0 or 1
+#
+oneCallPerConnection = 1
+
+############################################################################
+# offerBiDirectionalGIOP
+#
+#   Applies to the client side. Set to 1 to indicate that the
+#   ORB may choose to use a connection to do bidirectional GIOP
+#   calls. Set to 0 means the ORB should never do bidirectional.
+#
+#   Valid values = 0 or 1
+#
+offerBiDirectionalGIOP = 0
+
+############################################################################
+# diiThrowsSysExceptions
+#
+#   If the value of this variable is 1 then the Dynamic Invocation Interface
+#   functions (Request::invoke, send_oneway, send_deferred, get_response,
+#   poll_response) will throw system exceptions as appropriate. Otherwise 
+#   the exception will be stored in the Environment pseudo object associated
+#   with the Request. By default system exceptions are passed through the 
+#   Environment object.
+#
+#   Valid values = 0 or 1
+#
+diiThrowsSysExceptions = 0
+
+############################################################################
+# verifyObjectExistsAndType
+#
+#   If the value of this variable is 0 then the ORB will not
+#   send a GIOP LOCATE_REQUEST message to verify the existence of
+#   the object prior to the first invocation. Set this variable
+#   if the other end is a buggy ORB that cannot handle GIOP
+#   LOCATE_REQUEST. 
+#
+#   Valid values = 0 or 1
+#
+verifyObjectExistsAndType = 1
+
+############################################################################
+# giopTargetAddressMode
+#
+#   On the client side, if it is to use GIOP 1.2 or above to talk to a 
+#   server, use this Target Address Mode.
+#
+#   Valid values = 0 (GIOP::KeyAddr)
+#                  1 (GIOP::ProfileAddr)
+#                  2 (GIOP::ReferenceAddr)
+#
+giopTargetAddressMode = 0
+
+############################################################################
+# bootstrapAgentHostname
+#
+# Applies to the client side. Non-zero enables the use of Sun's bootstrap
+# agent protocol to resolve initial references. The value is the host name
+# where requests for initial references should be sent. Only use this
+# option to interoperate with Sun's javaIDL.
+#
+#bootstrapAgentHostname = localhost
+
+############################################################################
+# bootstrapAgentPort
+#
+# Applies to the client side. Use this port no. to contact the bootstrap 
+# agent.
+#
+bootstrapAgentPort = 900
+
+############################################################################
+# principal
+#
+# The value of the principal field in GIOP 1.0 and 1.1 requests
+#
+# principal = me
+
+
+
+############################################################################
+############################################################################
+############################################################################
+#                                                                          #
+#            Server Side Options                                           #
+#                                                                          #
+############################################################################
+
+
+############################################################################
+# endPoint
+# endPointNoPublish
+# endPointNoListen
+# endPointPublishAllIFs
+#
+#    There are 3 possible way to specify the endpoints a server should create.
+#    The 3 forms differ in the following ways:
+#         endPoint - create, listen on the connection and publish it in IORs
+#         endPointNoPublish - same as endPoint but do not publish it in IORs
+#         endPointNoListen - only publish it in IORs
+#
+#    There can be more than one configuration line defining endPoints.
+#    Each line adds one endpoint to the server.
+#
+#    Each configuration line can start with the keyword 'endPoint', e.g.
+#        endPoint = giop:tcp:neem:12345
+#        endPoint = giop:ssl:neem:23456
+#
+#    Or a short hand form can be used, like this:
+#
+#        endPoint = giop:tcp:neem:12345
+#                 = giop:ssl:neem:23456
+#
+#    The value of an endPoint configuration is a transport specific string.
+#    The transport strings recongised by the ORB and its supported transports
+#    are:
+#         1. giop:tcp:[<host>]:[<port>]
+#               The <host> and <port> parameter are optional. If either or
+#               both are missing, the ORB fills in the blank. For example,
+#               "giop:tcp::" will cause the ORB to pick an arbitrary tcp port
+#               as the endpoint and it will pick one IP address of the host
+#               as the host name.
+#
+#         2. giop:ssl:[<host>]:[<port>]
+#               Similar to the tcp transport except that SSL is run on top
+#               of the tcp connection.
+#
+#         3. giop:unix:[<filename>]
+#               Create a unix domain socket and bind to the file with pathname
+#               <filename>. If <filename> is not specified, e.g. "giop:unix:",
+#               the ORB would pick a file name based on the process ID and 
+#               the current timestamp.
+#               Therefore, if one wants to write an application that always
+#               restarts to use the same file to bind to its unix domain 
+#               socket, a filename should be specified in the transport string.
+#
+#   It is possible to use the ORB's transport extension framework to add
+#   a new transport to the ORB. In that case, the transport must define its
+#   own transport string format and must obey the colon separation rule.
+#   For example, if one is to create a transport which executes an arbitrary
+#   shell script and let the ORB use its stdin and stdout for sending and
+#   receiving giop messages,  a transport string could look like this:
+#         giop:shell:magic_gw
+#                ^     ^
+#                |     +--------- transport specific part
+#                +--------------- transport name
+#
+#   By default, no endPoint configuration is defined. In this case the ORB
+#   will create just 1 tcp endpoint as if the line:
+#         endPoint = giop:tcp::
+#   is specified in the configuration file
+#
+#   Other than tcp, none of the transports are guaranteed to be available
+#   on all platforms. If one specifies say:
+#          endPoint = giop:ssl::
+#   and the ORB cannot initialise an ssl endpoint, the INITIALIZE exception
+#   will be raised. Even though ssl is supported on a platform, its transport
+#   is implemented as a separate shared library and must be linked with the
+#   application for the ORB to initialise the endpoint.
+#
+#   Here are some examples of valid endPoint configurations:
+#
+#   endPoint = giop:tcp::
+#   endPoint = giop:unix:
+#            = giop:ssl::
+#
+#   endPointNoPublish = giop:tcp::
+#                     = giop:unix:
+#                     = giop:ssl::
+#
+#   endPointNoListen = giop:tcp:192.168.1.1:12345
+#
+#
+#   If the endPointPublishAllIFs boolean parameter is set to true, all
+#   non-loopback IP network interfaces are published in IORs, rather
+#   than just the first one.
+
+
+############################################################################
+# serverTransportRule
+#
+#    When the server sees a connection request from a client, it looks at the
+#    client's address and uses the rules in serverTransportRule to determine
+#    if the connection should be accepted.
+#
+#    There can be more than one configuration line of this type.
+#    Each line adds one rule to the selection process. The rules are applied
+#    in the order they are defined until one matching rule is found. 
+#
+#    The syntax of a rule is as follows:
+#    serverTransportRule =   [^]<address mask>      [action]+
+#
+#        <address mask> can be:
+#            1. localhost            if the address is this machine
+#            2. w.x.y.z/m1.m2.m3.m4  IPv4 address with the bits selected by
+#                                    the mask. e.g. 172.16.0.0/255.240.0.0
+#            3. *                    the wildcard that matches any address
+#
+#        <action>+ can be one or more of the following:
+#            1. none              Do not accept this connection.
+#            2. tcp,ssl,unix      Accept if the transport is any of the
+#                                 3 specified.
+#            3. bidir             Allow bidirectional requests if the
+#                                 client requests it.
+#
+#         The optional prefix ^ before <address mask>, if present, causes
+#         the ORB to remove previously declared clientTransportRules from
+#         its internal store before adding the current rule.
+#
+#    By default, no rule is defined. The ORB implicitly uses the following
+#    rule:
+#         serverTransportRule =    *     unix,tcp,ssl
+#    If any rule is specified, the implicit rule will not be applied.
+#
+#    Here are some example usages:
+#
+#    A) Only accept connections from our intranet
+#        serverTransportRule = localhost                  unix,tcp,ssl
+#                            = 172.16.0.0/255.240.0.0     tcp,ssl
+#                            = *                          none
+#
+#    B) Only accept ssl connections if the client is not on our intranet
+#        serverTransportRule = localhost                  unix,tcp,ssl
+#                            = 172.16.0.0/255.240.0.0     tcp,ssl
+#                            = *                          bidir,ssl
+
+
+############################################################################
+# serverCallTimeOutPeriod
+#
+#    Call timeout. On the server side, if the ORB cannot completely 
+#    unmarshal a call's arguments in the defined timeout, it shutdown the
+#    connection.
+#
+#    Valid values = (n >= 0 in milliseconds) 
+#                    0 --> no timeout.
+#
+serverCallTimeOutPeriod = 0
+
+############################################################################
+# inConScanPeriod
+#
+#   Idle connections shutdown. The ORB periodically scans all the
+#   incoming connections to detect if they are idle.
+#   If no operation has passed through a connection for a scan period,
+#   the ORB would treat this connection idle and shut it down.
+#
+#    Valid values = (n >= 0 in seconds) 
+#                    0 --> do not close idle connections.
+#
+inConScanPeriod = 180
+
+############################################################################
+# threadPerConnectionPolicy
+#
+#   1 means the ORB should dedicate one thread per connection on the 
+#   server side. 0 means the ORB should dispatch a thread from a pool
+#   to a connection only when a request has arrived.
+#
+#   Valid values = 0 or 1
+#
+threadPerConnectionPolicy = 1
+
+############################################################################
+# maxServerThreadPerConnection
+#
+#   The max. no. of threads the server will dispatch to serve the
+#   requests coming from one connection.
+#
+#   Valid values = (n >= 1) 
+#
+maxServerThreadPerConnection = 100
+
+############################################################################
+# maxServerThreadPoolSize
+#   The max. no. of threads the server will allocate to do various
+#   ORB tasks. This number does not include the dedicated thread
+#   per connection when the threadPerConnectionPolicy is in effect
+#
+#   Valid values = (n >= 1) 
+#
+maxServerThreadPoolSize = 100
+
+############################################################################
+# threadPerConnectionUpperLimit
+#
+#   If the one thread per connection is in effect, this number is
+#   the max. no. of connections the server will allow before it
+#   switch off the one thread per connection policy and move to
+#   the thread pool policy.
+#
+#   Valid values = (n >= 1) 
+#
+threadPerConnectionUpperLimit = 10000
+
+############################################################################
+# threadPerConnectionLowerLimit
+#
+#   If the one thread per connection was in effect and was switched
+#   off because threadPerConnectionUpperLimit has been exceeded
+#   previously, this number tells when the policy should be restored
+#   when the number of connections drop.
+#
+#   Valid values = (n >= 1 && n < threadPerConnectionUpperLimit) 
+#
+threadPerConnectionLowerLimit = 9000
+
+############################################################################
+# threadPoolWatchConnection
+#
+#   After dispatching an upcall in thread pool mode, the thread that
+#   has just performed the call can watch the connection for a short
+#   time before returning to the pool. This leads to less thread
+#   switching for a series of calls from a single client, but is less
+#   fair if there are concurrent clients. The connection is watched
+#   if the number of threads concurrently handling the connection is
+#   <= the value of this parameter. i.e. if the parameter is zero,
+#   the connection is never watched; if it is 1, the last thread
+#   managing a connection watches it; if 2, the connection is still
+#   watched if there is one other thread still in an upcall for the
+#   connection, and so on.
+
+threadPoolWatchConnection = 1
+
+############################################################################
+# connectionWatchPeriod
+#
+#   For each endpoint, the ORB allocates a thread to watch for new
+#   connections and to monitor existing connections for calls that
+#   should be handed by the thread pool. The thread blocks in select()
+#   or similar for a period, after which it re-scans the lists of
+#   connections it should watch. This parameter is specified in
+#   microseconds.
+#
+#   Valid values = (n >= 0 in microseconds)
+#
+connectionWatchPeriod = 50000
+
+############################################################################
+# connectionWatchImmediate
+#
+#   When a thread handles an incoming call, it unmarshals the
+#   arguments then marks the connection as watchable by the connection
+#   watching thread, in case the client sends a concurrent call on the
+#   same connection. If this parameter is set to the default false,
+#   the connection is not actually watched until the next connection
+#   watch period (determined by the connectionWatchPeriod parameter).
+#   If connectionWatchImmediate is set true, the connection watching
+#   thread is immediately signalled to watch the connection. That
+#   leads to faster interactive response to clients that multiplex
+#   calls, but adds significant overhead along the call chain.
+#
+#   Note that this setting has no effect on Windows, since it has no
+#   mechanism for signalling the connection watching thread.
+#
+#   Valid values = 0 or 1
+#
+connectionWatchImmediate = 0
+
+############################################################################
+# acceptBiDirectionalGIOP
+#
+#   Applies to the server side. Set to 1 to indicate that the
+#   ORB may choose to accept a client's offer to use bidirectional
+#   GIOP calls on a connection. Set to 0 means the ORB should
+#   never accept any bidirectional offer and should stick to normal
+#   GIOP.
+#
+#   Valid values = 0 or 1
+#
+acceptBiDirectionalGIOP = 0
+
+############################################################################
+# unixTransportDirectory
+#
+#   Applies to the server side. Determine the directory in which
+#   the unix domain socket is to be created.
+#
+#   Valid values = a valid pathname for a directory
+#
+unixTransportDirectory = /tmp/omni-%u
+# %u is expanded into user name.
+
+############################################################################
+# unixTransportPermission
+#
+#   Applies to the server side. Determine the permission mode bits
+#   the unix domain socket is set to.
+#
+#   Valid values = unix permission mode bits in octal radix (e.g. 0755)
+#
+unixTransportPermission = 0777
+
+############################################################################
+# supportCurrent
+#
+#   If the value of this variable is TRUE, per-thread information is
+#   made available through the Current interfaces, e.g.
+#   PortableServer::Current. If you do not need this information, you
+#   can set the value to 0, resulting in a small performance
+#   improvement.
+#
+supportCurrent = 1
+
+############################################################################
+# objectTableSize
+#
+#   Hash table size of the Active Object Map. If this is zero, the ORB
+#   uses a dynamically resized open hash table. This is normally the  
+#   best option, but it leads to less predictable performance since   
+#   any operation which adds or removes a table entry may trigger a   
+#   resize. If you set this to a non-zero value, the hash table has   
+#   the specified number of entries, and is never resized. Note that  
+#   the hash table is open, so this does not limit the number of      
+#   active objects, just how efficiently they can be located.
+#
+#   Valid values = (n >= 0)
+#                  0 --> use a dynamically resized table.
+#
+objectTableSize = 0
+
+############################################################################
+# poaHoldRequestTimeout
+#
+#   This variable can be used to set a time-out for calls being held
+#   in a POA which is in the HOLDING state.  It gives the time in
+#   milliseconds after which a TRANSIENT exception will be thrown if the
+#   POA is not transitioned to a different state.
+#
+#   Valid values = (n >= 0 in milliseconds) 
+#                   0 --> no time-out.
+#
+poaHoldRequestTimeout = 0
+
+############################################################################
+# poaUniquePersistentSystemIds
+#
+#   The POA specification requires that object ids in POAs with the
+#   PERSISTENT and SYSTEM_ID policies are unique between
+#   instantiations of the POA. Older versions of omniORB did not
+#   comply with that, and reused object ids. With this value true, the
+#   POA has the correct behaviour; with false, the POA uses the old
+#   scheme for compatibility.
+#
+#   Valid values = 0 or 1
+#
+poaUniquePersistentSystemIds = 1
+
+############################################################################
+# supportBootstrapAgent
+#
+# Applies to the server side. 1 means enable the support for Sun's
+# bootstrap agent protocol.  This enables interoperability between omniORB
+# servers and Sun's javaIDL clients. When this option is enabled, an
+# omniORB server will respond to a bootstrap agent request.
+supportBootstrapAgent = 0
diff --git a/recipes/omniorb/files/omniORB_embedded_appl.patch b/recipes/omniorb/files/omniORB_embedded_appl.patch
new file mode 100644
index 0000000000..43afc58bf2
--- /dev/null
+++ b/recipes/omniorb/files/omniORB_embedded_appl.patch
@@ -0,0 +1,24 @@
+*** omniORB-4.0.5/src/dir.mk    2002-02-18 06:58:54.000000000 -0500
+--- omniORB-4.0.5.new/src/dir.mk        2005-03-23 09:11:04.585121450 -0500
+***************
+*** 12,20 ****
+
+  SUBDIRS += lib
+
+! ifndef EmbeddedSystem
+  SUBDIRS += appl services
+! endif
+
+  all::
+        @echo
+--- 12,20 ----
+
+  SUBDIRS += lib
+
+! #ifndef EmbeddedSystem
+  SUBDIRS += appl services
+! #endif
+
+  all::
+        @echo
+
diff --git a/recipes/omniorb/files/rm_LongDouble.patch b/recipes/omniorb/files/rm_LongDouble.patch
new file mode 100644
index 0000000000..20556ddcf1
--- /dev/null
+++ b/recipes/omniorb/files/rm_LongDouble.patch
@@ -0,0 +1,14 @@
+*** omniORB-4.0.7/idl/corbaidl.idl.orig	2006-10-13 09:21:35.000000000 -0400
+--- omniORB-4.0.7/idl/corbaidl.idl	2006-10-13 09:22:38.000000000 -0400
+***************
+*** 48,56 ****
+  #endif
+    typedef sequence<float>              FloatSeq;
+    typedef sequence<double>             DoubleSeq;
+- #ifdef HAS_LongDouble
+-   typedef sequence<long double>        LongDoubleSeq;
+- #endif
+    typedef sequence<string>             StringSeq;
+    typedef sequence<wstring>            WStringSeq;
+  
+--- 48,53 ----