rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

4 files changed, 279 insertions, 0 deletions

diff --git a/recipes/olsrd/files/init b/recipes/olsrd/files/init
new file mode 100644
index 0000000000..46b2aaabd2
--- /dev/null
+++ b/recipes/olsrd/files/init
@@ -0,0 +1,36 @@
+#! /bin/sh
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/olsrd
+NAME="olsr.org"
+DESC="OLSR routing protocol daemon"
+
+test -x $DAEMON || exit 0
+
+set -e
+
+case "$1" in
+  start)
+	echo "Starting $DESC: $NAME"
+	start-stop-daemon -S -x $DAEMON -- -d 0;
+	echo "done."
+	;;
+  stop)
+	echo "Stopping $DESC: $NAME "
+	start-stop-daemon -K -x $DAEMON
+	echo "done."
+	;;
+  restart|force-reload)
+	echo "restarting $DESC: $NAME "
+	$0 stop
+	sleep 5
+	$0 start
+	exit;
+	;;
+  *)
+	echo "Usage: /etc/init.d/$NAME {start|stop|restart}" >&2
+	exit 1
+	;;
+esac
+
+exit 0
diff --git a/recipes/olsrd/files/olsrd-0.5.5-unbreak-makefile.patch b/recipes/olsrd/files/olsrd-0.5.5-unbreak-makefile.patch
new file mode 100644
index 0000000000..c08a49524c
--- /dev/null
+++ b/recipes/olsrd/files/olsrd-0.5.5-unbreak-makefile.patch
@@ -0,0 +1,47 @@
+Index: olsrd-a5b9cf969979/Makefile
+===================================================================
+--- olsrd-a5b9cf969979.orig/Makefile	2008-02-06 19:32:49.000000000 +0100
++++ olsrd-a5b9cf969979/Makefile	2008-06-23 15:33:35.000000000 +0200
+@@ -95,9 +95,8 @@
+ install: install_olsrd
+ 
+ install_bin:
+-		mkdir -p $(SBINDIR)
+-		install -m 755 $(EXENAME) $(SBINDIR)
+-		$(STRIP) $(SBINDIR)/$(EXENAME)
++		mkdir -p $(INSTALL_PREFIX)$(SBINDIR)
++		install -m 755 $(EXENAME) $(INSTALL_PREFIX)$(SBINDIR)
+ 
+ install_olsrd:	install_bin
+ 		@echo ========= C O N F I G U R A T I O N - F I L E ============
+@@ -109,16 +108,15 @@
+ 		@echo per default.
+ 		@echo can be found at files/olsrd.conf.default.lq
+ 		@echo ==========================================================
+-		mkdir -p $(ETCDIR)
+-		-cp -i files/olsrd.conf.default.lq $(CFGFILE)
++		mkdir -p $(INSTALL_PREFIX)$(ETCDIR)
+ 		@echo -------------------------------------------
+ 		@echo Edit $(CFGFILE) before running olsrd!!
+ 		@echo -------------------------------------------
+ 		@echo Installing manpages $(EXENAME)\(8\) and $(CFGNAME)\(5\)
+-		mkdir -p $(MANDIR)/man8/
+-		cp files/olsrd.8.gz $(MANDIR)/man8/$(EXENAME).8.gz
+-		mkdir -p $(MANDIR)/man5/
+-		cp files/olsrd.conf.5.gz $(MANDIR)/man5/$(CFGNAME).5.gz
++		mkdir -p $(INSTALL_PREFIX)$(MANDIR)/man8/
++		cp files/olsrd.8.gz $(INSTALL_PREFIX)$(MANDIR)/man8/$(EXENAME).8.gz
++		mkdir -p $(INSTALL_PREFIX)$(MANDIR)/man5/
++		cp files/olsrd.conf.5.gz $(INSTALL_PREFIX)$(MANDIR)/man5/$(CFGNAME).5.gz
+ 
+ tags:
+ 		$(TAGCMD) -o $(TAGFILE) $(TAG_SRCS)
+@@ -140,7 +138,7 @@
+ 		$(MAKECMD) -C lib LIBDIR=$(LIBDIR) clean
+ 
+ libs_install install_libs:
+-		$(MAKECMD) -C lib LIBDIR=$(LIBDIR) install
++		$(MAKECMD) -C lib LIBDIR=$(INSTALL_PREFIX)$(LIBDIR) install
+ 
+ httpinfo:
+ 		$(MAKECMD) -C lib/httpinfo clean
diff --git a/recipes/olsrd/files/olsrd.conf b/recipes/olsrd/files/olsrd.conf
new file mode 100644
index 0000000000..dbd0472803
--- /dev/null
+++ b/recipes/olsrd/files/olsrd.conf
@@ -0,0 +1,151 @@
+#
+# olsr.org configuration file
+#
+
+#
+# Periodically print the internal state, including information on
+# route calculation
+#
+
+DebugLevel		2
+
+#
+# Clear the screen each time the internal state changes
+#
+
+ClearScreen		yes
+
+#
+# IP version to use
+#
+
+IpVersion		4
+
+#
+# IPv4 HNAs - syntax: netaddr netmask
+#
+
+Hna4
+{
+#	0.0.0.0 0.0.0.0
+}
+
+#
+# Do not use hysteresis
+#
+
+UseHysteresis		no
+
+#
+# If using hysteresis, use "smooth" parameters
+#
+
+HystScaling		0.10
+HystThrHigh		0.80
+HystThrLow		0.30
+
+#
+# Which neighbours should be advertised via TC messages?
+#
+# 0 - only advertise our MPR selectors
+# 1 - advertise our MPR selectors and our MPRs
+# 2 - advertise all neighbors
+#
+
+TcRedundancy		2
+
+#
+# Specifies by how many MPRs each two-hop neighbour should be covered
+#
+
+MprCoverage		9
+
+#
+# Enable the link quality extensions?
+#
+# 0 - no
+# 1 - yes, use link quality for MPR selection
+# 2 - yes, use link quality for MPR selection and routing
+#
+
+LinkQualityLevel	2
+
+#
+# Windows size for packet loss calculation
+#
+
+LinkQualityWinSize	20
+
+#
+# Load the dot draw plugin
+#
+
+LoadPlugin "olsrd_httpinfo.so.0.1"
+{
+	PlParam "Port" "8080"
+	PlParam "Net" "192.168.0.0 255.255.255.0"
+}
+
+#LoadPlugin "olsrd_dot_draw.so.0.3"
+#{
+	# accept connection from IP:
+	# default 127.0.0.1 (localhost)	
+	#PlParam     "accept" "192.168.0.5"
+#}
+
+#
+# Interfaces - 
+# change to the name of your WLAN interface
+#
+
+Interface "eth0" "wlan0" "wlan1" "ath0" "ath1"
+{
+
+	#
+	# HELLO interval in seconds (float)
+	#
+
+	HelloInterval		2.0
+
+	#
+	# HELLO validity time
+	#
+
+	HelloValidityTime	40.0
+
+	#
+	# TC interval in seconds (float)
+	#
+
+	TcInterval		3.0
+
+	#
+	# TC validity time
+	#
+
+	TcValidityTime		15.0
+
+	#
+	# MID interval in seconds (float)
+	#
+
+	MidInterval		5.0
+
+	#
+	# MID validity time
+	#
+
+	MidValidityTime		15.0
+
+	#
+	# HNA interval in seconds (float)
+	#
+
+	HnaInterval		5.0
+
+	#
+	# HNA validity time
+	#
+
+	HnaValidityTime 	15.0
+}
diff --git a/recipes/olsrd/files/unbreak-makefile.patch b/recipes/olsrd/files/unbreak-makefile.patch
new file mode 100644
index 0000000000..cdf31df414
--- /dev/null
+++ b/recipes/olsrd/files/unbreak-makefile.patch
@@ -0,0 +1,45 @@
+--- /tmp/Makefile	2007-08-26 13:59:42.264688053 +0200
++++ olsrd-0.5.3/Makefile	2007-08-26 14:02:46.059161904 +0200
+@@ -89,9 +89,8 @@
+ install: install_olsrd
+ 
+ install_bin:
+-		mkdir -p $(SBINDIR)
+-		install -m 755 $(EXENAME) $(SBINDIR)
+-		$(STRIP) $(SBINDIR)/$(EXENAME)
++		mkdir -p $(INSTALL_PREFIX)$(SBINDIR)
++		install -m 755 $(EXENAME) $(INSTALL_PREFIX)$(SBINDIR)
+ 
+ install_olsrd:	install_bin
+ 		@echo ========= C O N F I G U R A T I O N - F I L E ============
+@@ -100,16 +99,16 @@
+ 		@echo configfile can be installed. Note that a LQ-based configfile
+ 		@echo can be found at files/olsrd.conf.default.lq
+ 		@echo ==========================================================
+-		mkdir -p $(ETCDIR)
++		mkdir -p $(INSTALL_PREFIX)$(ETCDIR)
+ 		-cp -i files/olsrd.conf.default.rfc $(CFGFILE)
+ 		@echo -------------------------------------------
+ 		@echo Edit $(CFGFILE) before running olsrd!!
+ 		@echo -------------------------------------------
+ 		@echo Installing manpages olsrd\(8\) and olsrd.conf\(5\)
+-		mkdir -p $(MANDIR)/man8/
+-		cp files/olsrd.8.gz $(MANDIR)/man8/olsrd.8.gz
+-		mkdir -p $(MANDIR)/man5/
+-		cp files/olsrd.conf.5.gz $(MANDIR)/man5/olsrd.conf.5.gz
++		mkdir -p $(INSTALL_PREFIX)$(MANDIR)/man8/
++		cp files/olsrd.8.gz $(INSTALL_PREFIX)$(MANDIR)/man8/olsrd.8.gz
++		mkdir -p $(INSTALL_PREFIX)$(MANDIR)/man5/
++		cp files/olsrd.conf.5.gz $(INSTALL_PREFIX)$(MANDIR)/man5/olsrd.conf.5.gz
+ 
+ tags:
+ 		$(TAGCMD) -o $(TAGFILE) $(TAG_SRCS)
+@@ -131,7 +130,7 @@
+ 		$(MAKECMD) -C lib LIBDIR=$(LIBDIR) clean
+ 
+ libs_install install_libs:
+-		$(MAKECMD) -C lib LIBDIR=$(LIBDIR) install
++		$(MAKECMD) -C lib LIBDIR=$(INSTALL_PREFIX)$(LIBDIR) install
+ 
+ httpinfo:
+ 		$(MAKECMD) -C lib/httpinfo clean