lvm2: add configuration file for palmpre machine

Signed-off-by: Simon Busch <morphis@gravedo.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>

1 files changed, 414 insertions, 0 deletions

diff --git a/recipes/lvm2/files/palmpre/lvm.conf b/recipes/lvm2/files/palmpre/lvm.conf
new file mode 100644
index 0000000000..1cf16c68e3
--- /dev/null
+++ b/recipes/lvm2/files/palmpre/lvm.conf
@@ -0,0 +1,414 @@
+# This is an example configuration file for the LVM2 system.
+# It contains the default settings that would be used if there was no
+# /etc/lvm/lvm.conf file.
+#
+# Refer to 'man lvm.conf' for further information including the file layout.
+#
+# To put this file in a different directory and override /etc/lvm set
+# the environment variable LVM_SYSTEM_DIR before running the tools.
+
+
+# This section allows you to configure which block devices should
+# be used by the LVM system.
+devices {
+
+    # Where do you want your volume groups to appear ?
+    dir = "/dev"
+
+    # An array of directories that contain the device nodes you wish
+    # to use with LVM2.
+    scan = [ "/dev" ]
+
+    # If several entries in the scanned directories correspond to the
+    # same block device and the tools need to display a name for device,
+    # all the pathnames are matched against each item in the following
+    # list of regular expressions in turn and the first match is used.
+    preferred_names = [ ]
+
+    # Try to avoid using undescriptive /dev/dm-N names, if present.
+    # preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
+
+    # A filter that tells LVM2 to only use a restricted set of devices.
+    # The filter consists of an array of regular expressions.  These
+    # expressions can be delimited by a character of your choice, and
+    # prefixed with either an 'a' (for accept) or 'r' (for reject).
+    # The first expression found to match a device name determines if
+    # the device will be accepted or rejected (ignored).  Devices that
+    # don't match any patterns are accepted.
+
+    # Be careful if there there are symbolic links or multiple filesystem 
+    # entries for the same device as each name is checked separately against
+    # the list of patterns.  The effect is that if any name matches any 'a'
+    # pattern, the device is accepted; otherwise if any name matches any 'r'
+    # pattern it is rejected; otherwise it is accepted.
+
+    # Don't have more than one filter line active at once: only one gets used.
+
+    # Run vgscan after you change this parameter to ensure that
+    # the cache file gets regenerated (see below).
+    # If it doesn't do what you expect, check the output of 'vgscan -vvvv'.
+
+
+    # By default we accept every block device:
+    # filter = [ "a/.*/" ]
+   
+    # Exclude everything but one mmc partition
+    filter = [ "a|^/dev/mmcblk0.*|" , "r|.*|" ]
+
+    # Exclude the cdrom drive
+    # filter = [ "r|/dev/cdrom|" ]
+
+    # When testing I like to work with just loopback devices:
+    # filter = [ "a/loop/", "r/.*/" ]
+
+    # Or maybe all loops and ide drives except hdc:
+    # filter =[ "a|loop|", "r|/dev/hdc|", "a|/dev/ide|", "r|.*|" ]
+
+    # Use anchors if you want to be really specific
+    # filter = [ "a|^/dev/hda8$|", "r/.*/" ]
+
+    # The results of the filtering are cached on disk to avoid
+    # rescanning dud devices (which can take a very long time).
+    # By default this cache is stored in the /etc/lvm/cache directory
+    # in a file called '.cache'.
+    # It is safe to delete the contents: the tools regenerate it.
+    # (The old setting 'cache' is still respected if neither of
+    # these new ones is present.)
+    cache_dir = "/var/lib/lvm/cache"
+    cache_file_prefix = ""
+
+    # You can turn off writing this cache file by setting this to 0.
+    write_cache_state = 1
+
+    # Advanced settings.
+
+    # List of pairs of additional acceptable block device types found 
+    # in /proc/devices with maximum (non-zero) number of partitions.
+    types = [ "mmc", 4 ]
+
+    # If sysfs is mounted (2.6 kernels) restrict device scanning to 
+    # the block devices it believes are valid.
+    # 1 enables; 0 disables.
+    sysfs_scan = 1	
+
+    # By default, LVM2 will ignore devices used as components of
+    # software RAID (md) devices by looking for md superblocks.
+    # 1 enables; 0 disables.
+    md_component_detection = 1
+
+    # By default, if a PV is placed directly upon an md device, LVM2
+    # will align its data blocks with the the chunk_size exposed in sysfs.
+    # 1 enables; 0 disables.
+    md_chunk_alignment = 1
+
+    # If, while scanning the system for PVs, LVM2 encounters a device-mapper
+    # device that has its I/O suspended, it waits for it to become accessible.
+    # Set this to 1 to skip such devices.  This should only be needed
+    # in recovery situations.
+    ignore_suspended_devices = 0
+}
+
+# This section that allows you to configure the nature of the
+# information that LVM2 reports.
+log {
+
+    # Controls the messages sent to stdout or stderr.
+    # There are three levels of verbosity, 3 being the most verbose.
+    verbose = 0
+
+    # Should we send log messages through syslog?
+    # 1 is yes; 0 is no.
+    syslog = 1
+
+    # Should we log error and debug messages to a file?
+    # By default there is no log file.
+    #file = "/var/log/lvm2.log"
+
+    # Should we overwrite the log file each time the program is run?
+    # By default we append.
+    overwrite = 0
+
+    # What level of log messages should we send to the log file and/or syslog?
+    # There are 6 syslog-like log levels currently in use - 2 to 7 inclusive.
+    # 7 is the most verbose (LOG_DEBUG).
+    level = 0
+    
+    # Format of output messages
+    # Whether or not (1 or 0) to indent messages according to their severity
+    indent = 1
+
+    # Whether or not (1 or 0) to display the command name on each line output
+    command_names = 0
+
+    # A prefix to use before the message text (but after the command name,
+    # if selected).  Default is two spaces, so you can see/grep the severity
+    # of each message.
+    prefix = "  "
+
+    # To make the messages look similar to the original LVM tools use:
+    #   indent = 0
+    #   command_names = 1
+    #   prefix = " -- "
+
+    # Set this if you want log messages during activation.
+    # Don't use this in low memory situations (can deadlock).
+    # activation = 0
+}
+
+# Configuration of metadata backups and archiving.  In LVM2 when we
+# talk about a 'backup' we mean making a copy of the metadata for the
+# *current* system.  The 'archive' contains old metadata configurations.
+# Backups are stored in a human readeable text format.
+backup {
+
+    # Should we maintain a backup of the current metadata configuration ?
+    # Use 1 for Yes; 0 for No.
+    # Think very hard before turning this off!
+    backup = 1
+
+    # Where shall we keep it ?
+    # Remember to back up this directory regularly!
+    backup_dir = "/var/lib/lvm/backup"
+
+    # Should we maintain an archive of old metadata configurations.
+    # Use 1 for Yes; 0 for No.
+    # On by default.  Think very hard before turning this off.
+    archive = 1
+
+    # Where should archived files go ?
+    # Remember to back up this directory regularly!
+    archive_dir = "/var/lib/lvm/archive"
+    
+    # What is the minimum number of archive files you wish to keep ?
+    retain_min = 10
+
+    # What is the minimum time you wish to keep an archive file for ?
+    retain_days = 30
+}
+
+# Settings for the running LVM2 in shell (readline) mode.
+shell {
+
+    # Number of lines of history to store in ~/.lvm_history
+    history_size = 100
+}
+
+
+# Miscellaneous global LVM2 settings
+global {
+    
+    # The file creation mask for any files and directories created.
+    # Interpreted as octal if the first digit is zero.
+    umask = 077
+
+    # Allow other users to read the files
+    #umask = 022
+
+    # Enabling test mode means that no changes to the on disk metadata
+    # will be made.  Equivalent to having the -t option on every
+    # command.  Defaults to off.
+    test = 0
+
+    # Default value for --units argument
+    units = "h"
+
+    # Whether or not to communicate with the kernel device-mapper.
+    # Set to 0 if you want to use the tools to manipulate LVM metadata 
+    # without activating any logical volumes.
+    # If the device-mapper kernel driver is not present in your kernel
+    # setting this to 0 should suppress the error messages.
+    activation = 1
+
+    # If we can't communicate with device-mapper, should we try running 
+    # the LVM1 tools?
+    # This option only applies to 2.4 kernels and is provided to help you
+    # switch between device-mapper kernels and LVM1 kernels.
+    # The LVM1 tools need to be installed with .lvm1 suffices
+    # e.g. vgscan.lvm1 and they will stop working after you start using
+    # the new lvm2 on-disk metadata format.
+    # The default value is set when the tools are built.
+    # fallback_to_lvm1 = 0
+
+    # The default metadata format that commands should use - "lvm1" or "lvm2".
+    # The command line override is -M1 or -M2.
+    # Defaults to "lvm1" if compiled in, else "lvm2".
+    # format = "lvm1"
+
+    # Location of proc filesystem
+    proc = "/proc"
+
+    # Type of locking to use. Defaults to local file-based locking (1).
+    # Turn locking off by setting to 0 (dangerous: risks metadata corruption
+    # if LVM2 commands get run concurrently).
+    # Type 2 uses the external shared library locking_library.
+    # Type 3 uses built-in clustered locking.
+    locking_type = 1
+
+    # If using external locking (type 2) and initialisation fails,
+    # with this set to 1 an attempt will be made to use the built-in
+    # clustered locking.
+    # If you are using a customised locking_library you should set this to 0.
+    fallback_to_clustered_locking = 1
+
+    # If an attempt to initialise type 2 or type 3 locking failed, perhaps
+    # because cluster components such as clvmd are not running, with this set
+    # to 1 an attempt will be made to use local file-based locking (type 1).
+    # If this succeeds, only commands against local volume groups will proceed.
+    # Volume Groups marked as clustered will be ignored.
+    fallback_to_local_locking = 1
+
+    # Local non-LV directory that holds file-based locks while commands are
+    # in progress.  A directory like /tmp that may get wiped on reboot is OK.
+    locking_dir = "/var/lock/lvm"
+
+    # Other entries can go here to allow you to load shared libraries
+    # e.g. if support for LVM1 metadata was compiled as a shared library use
+    #   format_libraries = "liblvm2format1.so" 
+    # Full pathnames can be given.
+
+    # Search this directory first for shared libraries.
+    #   library_dir = "/lib"
+
+    # The external locking library to load if locking_type is set to 2.
+    #   locking_library = "liblvm2clusterlock.so"
+}
+
+activation {
+    # How to fill in missing stripes if activating an incomplete volume.
+    # Using "error" will make inaccessible parts of the device return
+    # I/O errors on access.  You can instead use a device path, in which 
+    # case, that device will be used to in place of missing stripes.
+    # But note that using anything other than "error" with mirrored 
+    # or snapshotted volumes is likely to result in data corruption.
+    missing_stripe_filler = "error"
+
+    # How much stack (in KB) to reserve for use while devices suspended
+    reserved_stack = 256
+
+    # How much memory (in KB) to reserve for use while devices suspended
+    reserved_memory = 8192
+
+    # Nice value used while devices suspended
+    process_priority = -18
+
+    # If volume_list is defined, each LV is only activated if there is a
+    # match against the list.
+    #   "vgname" and "vgname/lvname" are matched exactly.
+    #   "@tag" matches any tag set in the LV or VG.
+    #   "@*" matches if any tag defined on the host is also set in the LV or VG
+    #
+    # volume_list = [ "vg1", "vg2/lvol1", "@tag1", "@*" ]
+
+    # Size (in KB) of each copy operation when mirroring
+    mirror_region_size = 512
+
+    # Setting to use when there is no readahead value stored in the metadata.
+    #
+    # "none" - Disable readahead.
+    # "auto" - Use default value chosen by kernel.
+    readahead = "auto"
+
+    # 'mirror_image_fault_policy' and 'mirror_log_fault_policy' define
+    # how a device failure affecting a mirror is handled.
+    # A mirror is composed of mirror images (copies) and a log.
+    # A disk log ensures that a mirror does not need to be re-synced
+    # (all copies made the same) every time a machine reboots or crashes.
+    #
+    # In the event of a failure, the specified policy will be used to
+    # determine what happens:
+    #
+    # "remove" - Simply remove the faulty device and run without it.  If
+    #            the log device fails, the mirror would convert to using
+    #            an in-memory log.  This means the mirror will not
+    #            remember its sync status across crashes/reboots and
+    #            the entire mirror will be re-synced.  If a
+    #            mirror image fails, the mirror will convert to a
+    #            non-mirrored device if there is only one remaining good
+    #            copy.
+    #
+    # "allocate" - Remove the faulty device and try to allocate space on
+    #            a new device to be a replacement for the failed device.
+    #            Using this policy for the log is fast and maintains the
+    #            ability to remember sync state through crashes/reboots.
+    #            Using this policy for a mirror device is slow, as it
+    #            requires the mirror to resynchronize the devices, but it
+    #            will preserve the mirror characteristic of the device.
+    #            This policy acts like "remove" if no suitable device and
+    #            space can be allocated for the replacement.
+    #            Currently this is not implemented properly and behaves
+    #            similarly to:
+    #
+    # "allocate_anywhere" - Operates like "allocate", but it does not
+    #            require that the new space being allocated be on a
+    #            device is not part of the mirror.  For a log device
+    #            failure, this could mean that the log is allocated on
+    #            the same device as a mirror device.  For a mirror
+    #            device, this could mean that the mirror device is
+    #            allocated on the same device as another mirror device.
+    #            This policy would not be wise for mirror devices
+    #            because it would break the redundant nature of the
+    #            mirror.  This policy acts like "remove" if no suitable
+    #            device and space can be allocated for the replacement.
+
+    mirror_log_fault_policy = "allocate"
+    mirror_device_fault_policy = "remove"
+}
+
+
+####################
+# Advanced section #
+####################
+
+# Metadata settings
+#
+# metadata {
+    # Default number of copies of metadata to hold on each PV.  0, 1 or 2.
+    # You might want to override it from the command line with 0 
+    # when running pvcreate on new PVs which are to be added to large VGs.
+
+    # pvmetadatacopies = 1
+
+    # Approximate default size of on-disk metadata areas in sectors.
+    # You should increase this if you have large volume groups or
+    # you want to retain a large on-disk history of your metadata changes.
+
+    # pvmetadatasize = 255
+
+    # List of directories holding live copies of text format metadata.
+    # These directories must not be on logical volumes!
+    # It's possible to use LVM2 with a couple of directories here,
+    # preferably on different (non-LV) filesystems, and with no other 
+    # on-disk metadata (pvmetadatacopies = 0). Or this can be in
+    # addition to on-disk metadata areas.
+    # The feature was originally added to simplify testing and is not
+    # supported under low memory situations - the machine could lock up.
+    #
+    # Never edit any files in these directories by hand unless you
+    # you are absolutely sure you know what you are doing! Use
+    # the supplied toolset to make changes (e.g. vgcfgrestore).
+
+    # dirs = [ "/etc/lvm/metadata", "/mnt/disk2/lvm/metadata2" ]
+#}
+
+# Event daemon
+#
+# dmeventd {
+    # mirror_library is the library used when monitoring a mirror device.
+    #
+    # "libdevmapper-event-lvm2mirror.so" attempts to recover from
+    # failures.  It removes failed devices from a volume group and
+    # reconfigures a mirror as necessary. If no mirror library is
+    # provided, mirrors are not monitored through dmeventd.
+
+    # mirror_library = "libdevmapper-event-lvm2mirror.so"
+
+    # snapshot_library is the library used when monitoring a snapshot device.
+    #
+    # "libdevmapper-event-lvm2snapshot.so" monitors the filling of
+    # snapshots and emits a warning through syslog, when the use of
+    # snapshot exceedes 80%. The warning is repeated when 85%, 90% and
+    # 95% of the snapshot are filled.
+
+    # snapshot_library = "libdevmapper-event-lvm2snapshot.so"
+#}
+