This is the Boardfile, defconfig, Kerneldiff and adapted bb file for the new tx25 ka-ro Board.

3 files changed, 18837 insertions, 0 deletions

diff --git a/recipes/linux/linux-2.6.30/tx25/defconfig b/recipes/linux/linux-2.6.30/tx25/defconfig
new file mode 100644
index 0000000000..db27e0251f
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/tx25/defconfig
@@ -0,0 +1,1203 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc4
+# Tue Jun  2 15:46:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_MACH_MX21 is not set
+# CONFIG_MACH_MX27 is not set
+CONFIG_MACH_MX25=y
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_TX25=y
+# CONFIG_KARO_DEBUG is not set
+CONFIG_MACH_STK5_BASEBOARD=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="init=/linuxrc root=1f01 rootfstype=jffs2 ro console=ttymxc0,115200 panic=1"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-5
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_MXC is not set
+CONFIG_ARCH_MXC_HAS_NFC_V2=y
+CONFIG_ARCH_MXC_HAS_NFC_V2_1=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_NETCONSOLE=y
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+CONFIG_NLS_CODEPAGE_1250=m
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/recipes/linux/linux-2.6.30/tx25/linux-2.6.30-rc4-karo.diff b/recipes/linux/linux-2.6.30/tx25/linux-2.6.30-rc4-karo.diff
new file mode 100644
index 0000000000..6926571c2e
--- /dev/null
+++ b/recipes/linux/linux-2.6.30/tx25/linux-2.6.30-rc4-karo.diff
@@ -0,0 +1,17631 @@
+diff -urNp linux-2.6.30-rc4/.config linux-2.6.30-rc4-karo/.config
+--- linux-2.6.30-rc4/.config	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/.config	2009-06-02 16:17:34.000000000 +0200
+@@ -0,0 +1,1203 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.30-rc4
++# Tue Jun  2 15:46:43 2009
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ARCH_MTD_XIP=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_POSIX_MQUEUE_SYSCTL=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_GROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++# CONFIG_RD_BZIP2 is not set
++# CONFIG_RD_LZMA is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++# CONFIG_ELF_CORE is not set
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++# CONFIG_AIO is not set
++# CONFIG_VM_EVENT_COUNTERS is not set
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++# CONFIG_SLOW_WORK is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++CONFIG_ARCH_MXC=y
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_W90X900 is not set
++
++#
++# Freescale MXC Implementations
++#
++# CONFIG_ARCH_MX1 is not set
++CONFIG_ARCH_MX2=y
++# CONFIG_ARCH_MX3 is not set
++# CONFIG_MACH_MX21 is not set
++# CONFIG_MACH_MX27 is not set
++CONFIG_MACH_MX25=y
++
++#
++# MX2 platforms:
++#
++CONFIG_MACH_TX25=y
++# CONFIG_KARO_DEBUG is not set
++CONFIG_MACH_STK5_BASEBOARD=y
++# CONFIG_MXC_IRQ_PRIOR is not set
++# CONFIG_MXC_PWM is not set
++CONFIG_ARCH_MXC_IOMUX_V3=y
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_NOIFAR=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
++CONFIG_COMMON_CLKDEV=y
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT=y
++CONFIG_HZ=100
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++CONFIG_ARCH_FLATMEM_HAS_HOLES=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_UNEVICTABLE_LRU=y
++CONFIG_HAVE_MLOCK=y
++CONFIG_HAVE_MLOCKED_PAGE_BIT=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0
++CONFIG_ZBOOT_ROM_BSS=0
++CONFIG_CMDLINE="init=/linuxrc root=1f01 rootfstype=jffs2 ro console=ttymxc0,115200 panic=1"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++CONFIG_CPU_IDLE=y
++CONFIG_CPU_IDLE_GOV_LADDER=y
++CONFIG_CPU_IDLE_GOV_MENU=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++CONFIG_VFP=y
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++CONFIG_PM_DEBUG=y
++CONFIG_PM_VERBOSE=y
++CONFIG_CAN_PM_TRACE=y
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_APM_EMULATION=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++# CONFIG_WIRELESS is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++CONFIG_MTD_DEBUG=y
++CONFIG_MTD_DEBUG_VERBOSE=0
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++CONFIG_MTD_TESTS=m
++CONFIG_MTD_REDBOOT_PARTS=y
++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-5
++# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
++CONFIG_MTD_REDBOOT_PARTS_READONLY=y
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_NAND_MXC is not set
++CONFIG_ARCH_MXC_HAS_NFC_V2=y
++CONFIG_ARCH_MXC_HAS_NFC_V2_1=y
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++CONFIG_COMPAT_NET_DEV_OPS=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++CONFIG_SMSC_PHY=y
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++CONFIG_FEC=y
++# CONFIG_FEC2 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++CONFIG_NETCONSOLE=y
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_NETPOLL=y
++# CONFIG_NETPOLL_TRAP is not set
++CONFIG_NET_POLL_CONTROLLER=y
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++CONFIG_INPUT_EVBUG=m
++# CONFIG_INPUT_APMPOWER is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_IMX=y
++CONFIG_SERIAL_IMX_CONSOLE=y
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=16
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++# CONFIG_SPI is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++CONFIG_DEBUG_GPIO=y
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++CONFIG_FB_MODE_HELPERS=y
++CONFIG_FB_TILEBLITTING=y
++
++#
++# Frame buffer hardware drivers
++#
++CONFIG_FB_IMX=y
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
++CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++CONFIG_LOGO=y
++CONFIG_LOGO_LINUX_MONO=y
++CONFIG_LOGO_LINUX_VGA16=y
++CONFIG_LOGO_LINUX_CLUT224=y
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++# CONFIG_LEDS_TRIGGER_TIMER is not set
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++CONFIG_EXT3_FS_XATTR=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=m
++CONFIG_FS_MBCACHE=m
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_FILE_LOCKING=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=y
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="cp437"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++CONFIG_NLS_CODEPAGE_1250=m
++# CONFIG_NLS_CODEPAGE_1251 is not set
++CONFIG_NLS_ASCII=m
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
++CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
++# CONFIG_SCHED_DEBUG is not set
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++CONFIG_DEBUG_SLAB=y
++CONFIG_DEBUG_SLAB_LEAK=y
++# CONFIG_DEBUG_PREEMPT is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_PAGE_POISONING is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_TRACING_SUPPORT=y
++
++#
++# Tracers
++#
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_PREEMPT_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_CONTEXT_SWITCH_TRACER is not set
++# CONFIG_EVENT_TRACER is not set
++# CONFIG_BOOT_TRACER is not set
++# CONFIG_TRACE_BRANCH_PROFILING is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_KMEMTRACE is not set
++# CONFIG_WORKQUEUE_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++CONFIG_ARM_UNWIND=y
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=y
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=y
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_ZLIB is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
+diff -urNp linux-2.6.30-rc4/arch/arm/configs/karo_tx25_defconfig linux-2.6.30-rc4-karo/arch/arm/configs/karo_tx25_defconfig
+--- linux-2.6.30-rc4/arch/arm/configs/karo_tx25_defconfig	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/configs/karo_tx25_defconfig	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,1203 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.30-rc4
++# Tue Jun  2 15:46:43 2009
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_ARCH_MTD_XIP=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_LOCK_KERNEL=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++CONFIG_POSIX_MQUEUE=y
++CONFIG_POSIX_MQUEUE_SYSCTL=y
++# CONFIG_BSD_PROCESS_ACCT is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=17
++# CONFIG_GROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++# CONFIG_SYSFS_DEPRECATED_V2 is not set
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_RD_GZIP=y
++# CONFIG_RD_BZIP2 is not set
++# CONFIG_RD_LZMA is not set
++# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++CONFIG_SYSCTL_SYSCALL=y
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++# CONFIG_STRIP_ASM_SYMS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++# CONFIG_ELF_CORE is not set
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++# CONFIG_AIO is not set
++# CONFIG_VM_EVENT_COUNTERS is not set
++# CONFIG_COMPAT_BRK is not set
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++# CONFIG_MARKERS is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++# CONFIG_SLOW_WORK is not set
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++# CONFIG_MODULE_SRCVERSION_ALL is not set
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_GEMINI is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++CONFIG_ARCH_MXC=y
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_MMP is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++# CONFIG_ARCH_OMAP is not set
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_W90X900 is not set
++
++#
++# Freescale MXC Implementations
++#
++# CONFIG_ARCH_MX1 is not set
++CONFIG_ARCH_MX2=y
++# CONFIG_ARCH_MX3 is not set
++# CONFIG_MACH_MX21 is not set
++# CONFIG_MACH_MX27 is not set
++CONFIG_MACH_MX25=y
++
++#
++# MX2 platforms:
++#
++CONFIG_MACH_TX25=y
++# CONFIG_KARO_DEBUG is not set
++CONFIG_MACH_STK5_BASEBOARD=y
++# CONFIG_MXC_IRQ_PRIOR is not set
++# CONFIG_MXC_PWM is not set
++CONFIG_ARCH_MXC_IOMUX_V3=y
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_ARM926T=y
++CONFIG_CPU_32v5=y
++CONFIG_CPU_ABRT_EV5TJ=y
++CONFIG_CPU_PABRT_NOIFAR=y
++CONFIG_CPU_CACHE_VIVT=y
++CONFIG_CPU_COPY_V4WB=y
++CONFIG_CPU_TLB_V4WBI=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
++# CONFIG_OUTER_CACHE is not set
++CONFIG_COMMON_CLKDEV=y
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++# CONFIG_HIGH_RES_TIMERS is not set
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++CONFIG_PREEMPT=y
++CONFIG_HZ=100
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++CONFIG_ARCH_FLATMEM_HAS_HOLES=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++# CONFIG_HIGHMEM is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4096
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_UNEVICTABLE_LRU=y
++CONFIG_HAVE_MLOCK=y
++CONFIG_HAVE_MLOCKED_PAGE_BIT=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0
++CONFIG_ZBOOT_ROM_BSS=0
++CONFIG_CMDLINE="init=/linuxrc root=1f01 rootfstype=jffs2 ro console=ttymxc0,115200 panic=1"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++CONFIG_CPU_IDLE=y
++CONFIG_CPU_IDLE_GOV_LADDER=y
++CONFIG_CPU_IDLE_GOV_MENU=y
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++CONFIG_VFP=y
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++# CONFIG_BINFMT_MISC is not set
++
++#
++# Power management options
++#
++CONFIG_PM=y
++CONFIG_PM_DEBUG=y
++CONFIG_PM_VERBOSE=y
++CONFIG_CAN_PM_TRACE=y
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++CONFIG_APM_EMULATION=y
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++# CONFIG_NET_KEY is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++# CONFIG_IP_PNP_RARP is not set
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++CONFIG_SYN_COOKIES=y
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
++# CONFIG_INET_XFRM_MODE_TUNNEL is not set
++# CONFIG_INET_XFRM_MODE_BEET is not set
++# CONFIG_INET_LRO is not set
++# CONFIG_INET_DIAG is not set
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_PHONET is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++# CONFIG_WIRELESS is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++CONFIG_MTD_DEBUG=y
++CONFIG_MTD_DEBUG_VERBOSE=0
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++CONFIG_MTD_TESTS=m
++CONFIG_MTD_REDBOOT_PARTS=y
++CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-5
++# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
++CONFIG_MTD_REDBOOT_PARTS_READONLY=y
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++CONFIG_MTD_NAND_VERIFY_WRITE=y
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_NAND_MXC is not set
++CONFIG_ARCH_MXC_HAS_NFC_V2=y
++CONFIG_ARCH_MXC_HAS_NFC_V2_1=y
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=m
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=8192
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++# CONFIG_SCSI is not set
++# CONFIG_SCSI_DMA is not set
++# CONFIG_SCSI_NETLINK is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++CONFIG_COMPAT_NET_DEV_OPS=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++CONFIG_PHYLIB=y
++
++#
++# MII PHY device drivers
++#
++# CONFIG_MARVELL_PHY is not set
++# CONFIG_DAVICOM_PHY is not set
++# CONFIG_QSEMI_PHY is not set
++# CONFIG_LXT_PHY is not set
++# CONFIG_CICADA_PHY is not set
++# CONFIG_VITESSE_PHY is not set
++CONFIG_SMSC_PHY=y
++# CONFIG_BROADCOM_PHY is not set
++# CONFIG_ICPLUS_PHY is not set
++# CONFIG_REALTEK_PHY is not set
++# CONFIG_NATIONAL_PHY is not set
++# CONFIG_STE10XP is not set
++# CONFIG_LSI_ET1011C_PHY is not set
++# CONFIG_FIXED_PHY is not set
++# CONFIG_MDIO_BITBANG is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++# CONFIG_SMC91X is not set
++# CONFIG_DM9000 is not set
++# CONFIG_ETHOC is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++CONFIG_FEC=y
++# CONFIG_FEC2 is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++CONFIG_NETCONSOLE=y
++CONFIG_NETCONSOLE_DYNAMIC=y
++CONFIG_NETPOLL=y
++# CONFIG_NETPOLL_TRAP is not set
++CONFIG_NET_POLL_CONTROLLER=y
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=m
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=m
++CONFIG_INPUT_EVBUG=m
++# CONFIG_INPUT_APMPOWER is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_GPIO=m
++CONFIG_INPUT_MOUSE=y
++# CONFIG_MOUSE_PS2 is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++# CONFIG_SERIAL_8250 is not set
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_IMX=y
++CONFIG_SERIAL_IMX_CONSOLE=y
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++CONFIG_LEGACY_PTYS=y
++CONFIG_LEGACY_PTY_COUNT=16
++# CONFIG_IPMI_HANDLER is not set
++# CONFIG_HW_RANDOM is not set
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++# CONFIG_I2C is not set
++# CONFIG_SPI is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++CONFIG_DEBUG_GPIO=y
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=y
++CONFIG_FB_CFB_COPYAREA=y
++CONFIG_FB_CFB_IMAGEBLIT=y
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++CONFIG_FB_MODE_HELPERS=y
++CONFIG_FB_TILEBLITTING=y
++
++#
++# Frame buffer hardware drivers
++#
++CONFIG_FB_IMX=y
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_BROADSHEET is not set
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE=y
++CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
++CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
++# CONFIG_FONTS is not set
++CONFIG_FONT_8x8=y
++CONFIG_FONT_8x16=y
++CONFIG_LOGO=y
++CONFIG_LOGO_LINUX_MONO=y
++CONFIG_LOGO_LINUX_VGA16=y
++CONFIG_LOGO_LINUX_CLUT224=y
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++# CONFIG_USB_SUPPORT is not set
++# CONFIG_MMC is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_GPIO_PLATFORM=y
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++# CONFIG_LEDS_TRIGGER_TIMER is not set
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_GPIO is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++
++#
++# iptables trigger is under Netfilter config (LED target)
++#
++CONFIG_RTC_LIB=y
++# CONFIG_RTC_CLASS is not set
++# CONFIG_DMADEVICES is not set
++# CONFIG_AUXDISPLAY is not set
++# CONFIG_REGULATOR is not set
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=m
++# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
++CONFIG_EXT3_FS_XATTR=y
++CONFIG_EXT3_FS_POSIX_ACL=y
++# CONFIG_EXT3_FS_SECURITY is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=m
++CONFIG_FS_MBCACHE=m
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_FILE_LOCKING=y
++# CONFIG_XFS_FS is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++# CONFIG_QUOTA is not set
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# Caches
++#
++# CONFIG_FSCACHE is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=y
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=m
++CONFIG_MSDOS_FS=m
++CONFIG_VFAT_FS=m
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++CONFIG_NTFS_FS=m
++# CONFIG_NTFS_DEBUG is not set
++CONFIG_NTFS_RW=y
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++CONFIG_CONFIGFS_FS=y
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++CONFIG_CRAMFS=y
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++# CONFIG_NILFS2_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="cp437"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++CONFIG_NLS_CODEPAGE_850=y
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++CONFIG_NLS_CODEPAGE_1250=m
++# CONFIG_NLS_CODEPAGE_1251 is not set
++CONFIG_NLS_ASCII=m
++CONFIG_NLS_ISO8859_1=m
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++CONFIG_NLS_ISO8859_15=y
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++CONFIG_NLS_UTF8=y
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++# CONFIG_DEBUG_FS is not set
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
++CONFIG_DETECT_HUNG_TASK=y
++CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
++CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
++# CONFIG_SCHED_DEBUG is not set
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++CONFIG_DEBUG_SLAB=y
++CONFIG_DEBUG_SLAB_LEAK=y
++# CONFIG_DEBUG_PREEMPT is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++# CONFIG_DEBUG_MUTEXES is not set
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++# CONFIG_SYSCTL_SYSCALL_CHECK is not set
++# CONFIG_PAGE_POISONING is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_TRACING_SUPPORT=y
++
++#
++# Tracers
++#
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_PREEMPT_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_CONTEXT_SWITCH_TRACER is not set
++# CONFIG_EVENT_TRACER is not set
++# CONFIG_BOOT_TRACER is not set
++# CONFIG_TRACE_BRANCH_PROFILING is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_KMEMTRACE is not set
++# CONFIG_WORKQUEUE_TRACER is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++CONFIG_ARM_UNWIND=y
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_PCOMP=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++CONFIG_CRYPTO_WORKQUEUE=y
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=y
++# CONFIG_CRYPTO_LRW is not set
++# CONFIG_CRYPTO_PCBC is not set
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=y
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++# CONFIG_CRYPTO_CRC32C is not set
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=y
++# CONFIG_CRYPTO_ANUBIS is not set
++CONFIG_CRYPTO_ARC4=y
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_ZLIB is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_HW=y
++# CONFIG_BINARY_PRINTF is not set
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++# CONFIG_CRC_CCITT is not set
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++# CONFIG_LIBCRC32C is not set
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_DECOMPRESS_GZIP=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
++CONFIG_NLATTR=y
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/Kconfig linux-2.6.30-rc4-karo/arch/arm/mach-mx2/Kconfig
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/Kconfig	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/Kconfig	2009-06-02 17:05:27.000000000 +0200
+@@ -6,14 +6,26 @@ choice
+ 
+ config MACH_MX21
+ 	bool "i.MX21 support"
++	select ARCH_MXC_IOMUX_V2
++	select ARCH_MXC_HAS_NFC_V1
+ 	help
+ 	  This enables support for Freescale's MX2 based i.MX21 processor.
+ 
+ config MACH_MX27
+ 	bool "i.MX27 support"
++	select ARCH_MXC_IOMUX_V2
++	select ARCH_MXC_HAS_NFC_V1
+ 	help
+ 	  This enables support for Freescale's MX2 based i.MX27 processor.
+ 
++config MACH_MX25
++	bool "i.MX25 support"
++	select ARCH_MXC_IOMUX_V3
++	select ARCH_MXC_HAS_NFC_V2_1
++	select PHYLIB if FEC
++	help
++	  This enables support for Freescale's MX2 based i.MX25 processor.
++
+ endchoice
+ 
+ comment "MX2 platforms:"
+@@ -39,6 +51,26 @@ config MACH_PCM038
+ 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
+ 	  includes specific configurations for the module and its peripherals.
+ 
++config MACH_TX25
++	bool "Support Ka-Ro electronics TX25 module"
++	depends on MACH_MX25
++	help
++	  Include support for Ka-Ro TX25 processor module
++
++config KARO_DEBUG
++	bool "Enable Ka-Ro specific debug messages"
++	depends on MACH_TX25 || MACH_TX27
++	help
++	  Compile the architecture specific files with -DDEBUG to enable
++	  additional debug messages
++
++config MACH_STK5_BASEBOARD
++	bool "Ka-Ro Starterkit-5 (STK5) development board"
++	depends on MACH_TX27 || MACH_TX25
++	help
++	  This adds board specific devices that can be found on Ka-Ro's
++	  STK5 evaluation board.
++
+ choice
+ 	prompt "Baseboard"
+ 	depends on MACH_PCM038
+@@ -60,3 +92,4 @@ config MACH_MX27_3DS
+ 	  Include support for MX27PDK platform. This includes specific
+ 	  configurations for the board and its peripherals.
+ endif
++
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/Makefile linux-2.6.30-rc4-karo/arch/arm/mach-mx2/Makefile
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/Makefile	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/Makefile	2009-06-02 17:05:27.000000000 +0200
+@@ -2,17 +2,31 @@
+ # Makefile for the linux kernel.
+ #
+ 
++ifeq ($(CONFIG_KARO_DEBUG),y)
++	EXTRA_CFLAGS += -DDEBUG
++endif
++
+ # Object file lists.
+ 
+-obj-y	:=  generic.o devices.o serial.o
++obj-y	:=  generic.o serial.o
++obj-$(CONFIG_MACH_MX25)	+=  devices_mx25.o
++ifeq ($(CONFIG_MACH_MX25),)
++obj-y	+=  devices.o
++endif
++
++obj-$(CONFIG_MACH_MX21)			+= clock_imx21.o
+ 
+-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
++obj-$(CONFIG_MACH_MX25)			+= clock_imx25.o
++obj-$(CONFIG_MACH_MX25)			+= cpu_imx25.o
+ 
+-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
+-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
++obj-$(CONFIG_MACH_MX27)			+= cpu_imx27.o
++obj-$(CONFIG_MACH_MX27)			+= clock_imx27.o
+ 
+-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
+-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
+-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
++obj-$(CONFIG_MACH_MX21ADS)		+= mx21ads.o
++obj-$(CONFIG_MACH_MX27ADS)		+= mx27ads.o
++obj-$(CONFIG_MACH_PCM038)		+= pcm038.o
++obj-$(CONFIG_MACH_PCM970_BASEBOARD)	+= pcm970-baseboard.o
++obj-$(CONFIG_MACH_MX27_3DS)		+= mx27pdk.o
++obj-$(CONFIG_MACH_TX27)			+= karo-tx27.o tx27_gpio.o
++obj-$(CONFIG_MACH_TX25)			+= karo-tx25.o
++obj-$(CONFIG_MACH_STK5_BASEBOARD)	+= stk5-baseboard.o
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/Makefile.boot linux-2.6.30-rc4-karo/arch/arm/mach-mx2/Makefile.boot
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/Makefile.boot	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/Makefile.boot	2009-06-02 17:05:27.000000000 +0200
+@@ -5,3 +5,7 @@ initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC08
+ zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
+ params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
+ initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
++
++zreladdr-$(CONFIG_MACH_MX25)	:= 0x80008000
++params_phys-$(CONFIG_MACH_MX25)	:= 0x80000100
++initrd_phys-$(CONFIG_MACH_MX25)	:= 0x80800000
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/clock_imx21.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/clock_imx21.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/clock_imx21.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/clock_imx21.c	2009-06-02 17:05:26.000000000 +0200
+@@ -890,7 +890,7 @@ static struct clk clko_clk = {
+ 		.con_id = n, \
+ 		.clk = &c, \
+ 	},
+-static struct clk_lookup lookups[] __initdata = {
++static struct clk_lookup lookups[] = {
+ /* It's unlikely that any driver wants one of them directly:
+ 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
+ 	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/clock_imx25.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/clock_imx25.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/clock_imx25.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/clock_imx25.c	2009-06-02 17:05:26.000000000 +0200
+@@ -0,0 +1,1967 @@
++/*
++ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/* based on mach-mx27/clock.c */
++
++#include <linux/clk.h>
++#include <linux/io.h>
++#include <linux/module.h>
++//#include <linux/spinlock.h>
++
++#include <asm/clkdev.h>
++//#include <asm/div64.h>
++
++#include <mach/clock.h>
++#include <mach/common.h>
++#include <mach/hardware.h>
++
++/* Register offsets */
++#define MXC_CCM_MPCTL				(IO_ADDRESS(CCM_BASE_ADDR) + 0x00)
++#define MXC_CCM_UPCTL				(IO_ADDRESS(CCM_BASE_ADDR) + 0x04)
++#define MXC_CCM_CCTL				(IO_ADDRESS(CCM_BASE_ADDR) + 0x08)
++#define MXC_CCM_CGCR0				(IO_ADDRESS(CCM_BASE_ADDR) + 0x0C)
++#define MXC_CCM_CGCR1				(IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
++#define MXC_CCM_CGCR2				(IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
++#define MXC_CCM_PCDR0				(IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
++#define MXC_CCM_PCDR1				(IO_ADDRESS(CCM_BASE_ADDR) + 0x1C)
++#define MXC_CCM_PCDR2				(IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
++#define MXC_CCM_PCDR3				(IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
++#define MXC_CCM_RCSR				(IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
++#define MXC_CCM_CRDR				(IO_ADDRESS(CCM_BASE_ADDR) + 0x2C)
++#define MXC_CCM_DCVR0				(IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
++#define MXC_CCM_DCVR1				(IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
++#define MXC_CCM_DCVR2				(IO_ADDRESS(CCM_BASE_ADDR) + 0x38)
++#define MXC_CCM_DCVR3				(IO_ADDRESS(CCM_BASE_ADDR) + 0x3C)
++#define MXC_CCM_LTR0				(IO_ADDRESS(CCM_BASE_ADDR) + 0x40)
++#define MXC_CCM_LTR1				(IO_ADDRESS(CCM_BASE_ADDR) + 0x44)
++#define MXC_CCM_LTR2				(IO_ADDRESS(CCM_BASE_ADDR) + 0x48)
++#define MXC_CCM_LTR3				(IO_ADDRESS(CCM_BASE_ADDR) + 0x4C)
++#define MXC_CCM_LTBR0				(IO_ADDRESS(CCM_BASE_ADDR) + 0x50)
++#define MXC_CCM_LTBR1				(IO_ADDRESS(CCM_BASE_ADDR) + 0x54)
++#define MXC_CCM_PMCR0				(IO_ADDRESS(CCM_BASE_ADDR) + 0x58)
++#define MXC_CCM_PMCR1				(IO_ADDRESS(CCM_BASE_ADDR) + 0x5C)
++#define MXC_CCM_PMCR2				(IO_ADDRESS(CCM_BASE_ADDR) + 0x60)
++#define MXC_CCM_MCR				(IO_ADDRESS(CCM_BASE_ADDR) + 0x64)
++
++#define MXC_CCM_MPCTL_BRMO			(1 << 31)
++#define MXC_CCM_MPCTL_PD_OFFSET			26
++#define MXC_CCM_MPCTL_PD_MASK			(0xf << 26)
++#define MXC_CCM_MPCTL_MFD_OFFSET		16
++#define MXC_CCM_MPCTL_MFD_MASK			(0x3ff << 16)
++#define MXC_CCM_MPCTL_MFI_OFFSET		10
++#define MXC_CCM_MPCTL_MFI_MASK			(0xf << 10)
++#define MXC_CCM_MPCTL_MFN_OFFSET		0
++#define MXC_CCM_MPCTL_MFN_MASK			0x3ff
++#define MXC_CCM_MPCTL_LF			(1 << 15)
++
++#define MXC_CCM_UPCTL_BRMO			(1 << 31)
++#define MXC_CCM_UPCTL_PD_OFFSET			26
++#define MXC_CCM_UPCTL_PD_MASK			(0xf << 26)
++#define MXC_CCM_UPCTL_MFD_OFFSET		16
++#define MXC_CCM_UPCTL_MFD_MASK			(0x3ff << 16)
++#define MXC_CCM_UPCTL_MFI_OFFSET		10
++#define MXC_CCM_UPCTL_MFI_MASK			(0xf << 10)
++#define MXC_CCM_UPCTL_MFN_OFFSET		0
++#define MXC_CCM_UPCTL_MFN_MASK			0x3ff
++#define MXC_CCM_UPCTL_LF			(1 << 15)
++
++#define MXC_CCM_CCTL_ARM_OFFSET			30
++#define MXC_CCM_CCTL_ARM_MASK			(0x3 << 30)
++#define MXC_CCM_CCTL_AHB_OFFSET			28
++#define MXC_CCM_CCTL_AHB_MASK			(0x3 << 28)
++#define MXC_CCM_CCTL_MPLL_RST			(1 << 27)
++#define MXC_CCM_CCTL_UPLL_RST			(1 << 26)
++#define MXC_CCM_CCTL_LP_CTL_OFFSET		24
++#define MXC_CCM_CCTL_LP_CTL_MASK		(0x3 << 24)
++#define MXC_CCM_CCTL_LP_MODE_RUN		(0x0 << 24)
++#define MXC_CCM_CCTL_LP_MODE_WAIT		(0x1 << 24)
++#define MXC_CCM_CCTL_LP_MODE_DOZE		(0x2 << 24)
++#define MXC_CCM_CCTL_LP_MODE_STOP		(0x3 << 24)
++#define MXC_CCM_CCTL_UPLL_DISABLE		(1 << 23)
++#define MXC_CCM_CCTL_MPLL_BYPASS		(1 << 22)
++#define MXC_CCM_CCTL_USB_DIV_OFFSET		16
++#define MXC_CCM_CCTL_USB_DIV_MASK		(0x3 << 16)
++#define MXC_CCM_CCTL_CG_CTRL			(1 << 15)
++#define MXC_CCM_CCTL_ARM_SRC			(1 << 14)
++
++#define MXC_CCM_CGCR0_HCLK_ATA_OFFSET		(16 + 0)
++#define MXC_CCM_CGCR0_HCLK_BROM_OFFSET		(16 + 1)
++#define MXC_CCM_CGCR0_HCLK_CSI_OFFSET		(16 + 2)
++#define MXC_CCM_CGCR0_HCLK_EMI_OFFSET		(16 + 3)
++#define MXC_CCM_CGCR0_HCLK_ESAI_OFFSET		(16 + 4)
++#define MXC_CCM_CGCR0_HCLK_ESDHC1_OFFSET	(16 + 5)
++#define MXC_CCM_CGCR0_HCLK_ESDHC2_OFFSET	(16 + 6)
++#define MXC_CCM_CGCR0_HCLK_FEC_OFFSET		(16 + 7)
++#define MXC_CCM_CGCR0_HCLK_LCDC_OFFSET		(16 + 8)
++#define MXC_CCM_CGCR0_HCLK_RTIC_OFFSET		(16 + 9)
++#define MXC_CCM_CGCR0_HCLK_SDMA_OFFSET		(16 + 10)
++#define MXC_CCM_CGCR0_HCLK_SLCDC_OFFSET		(16 + 11)
++#define MXC_CCM_CGCR0_HCLK_USBOTG_OFFSET	(16 + 12)
++
++#define MXC_CCM_CGCR0_PER_CSI_OFFSET		 0
++#define MXC_CCM_CGCR0_PER_EPIT_OFFSET		 1
++#define MXC_CCM_CGCR0_PER_ESAI_OFFSET		 2
++#define MXC_CCM_CGCR0_PER_ESDHC1_OFFSET		 3
++#define MXC_CCM_CGCR0_PER_ESDHC2_OFFSET		 4
++#define MXC_CCM_CGCR0_PER_GPT_OFFSET		 5
++#define MXC_CCM_CGCR0_PER_I2C_OFFSET		 6
++#define MXC_CCM_CGCR0_PER_LCDC_OFFSET		 7
++#define MXC_CCM_CGCR0_PER_NFC_OFFSET		 8
++#define MXC_CCM_CGCR0_PER_OWIRE_OFFSET		 9
++#define MXC_CCM_CGCR0_PER_PWM_OFFSET		10
++#define MXC_CCM_CGCR0_PER_SIM1_OFFSET		11
++#define MXC_CCM_CGCR0_PER_SIM2_OFFSET		12
++#define MXC_CCM_CGCR0_PER_SSI1_OFFSET		13
++#define MXC_CCM_CGCR0_PER_SSI2_OFFSET		14
++#define MXC_CCM_CGCR0_PER_UART_OFFSET		15
++
++#define MXC_CCM_CGCR1_AUDMUX_OFFSET		 0
++#define MXC_CCM_CGCR1_ATA_OFFSET		 1
++#define MXC_CCM_CGCR1_CAN1_OFFSET		 2
++#define MXC_CCM_CGCR1_CAN2_OFFSET		 3
++#define MXC_CCM_CGCR1_CSI_OFFSET		 4
++#define MXC_CCM_CGCR1_CSPI1_OFFSET		 5
++#define MXC_CCM_CGCR1_CSPI2_OFFSET		 6
++#define MXC_CCM_CGCR1_CSPI3_OFFSET		 7
++#define MXC_CCM_CGCR1_DRYICE_OFFSET		 8
++#define MXC_CCM_CGCR1_ECT_OFFSET		 9
++#define MXC_CCM_CGCR1_EPIT1_OFFSET		10
++#define MXC_CCM_CGCR1_EPIT2_OFFSET		11
++#define MXC_CCM_CGCR1_ESAI_OFFSET		12
++#define MXC_CCM_CGCR1_ESDHC1_OFFSET		13
++#define MXC_CCM_CGCR1_ESDHC2_OFFSET		14
++#define MXC_CCM_CGCR1_FEC_OFFSET		15
++#define MXC_CCM_CGCR1_GPIO1_OFFSET		16
++#define MXC_CCM_CGCR1_GPIO2_OFFSET		17
++#define MXC_CCM_CGCR1_GPIO3_OFFSET		18
++#define MXC_CCM_CGCR1_GPT1_OFFSET		19
++#define MXC_CCM_CGCR1_GPT2_OFFSET		20
++#define MXC_CCM_CGCR1_GPT3_OFFSET		21
++#define MXC_CCM_CGCR1_GPT4_OFFSET		22
++#define MXC_CCM_CGCR1_I2C1_OFFSET		23
++#define MXC_CCM_CGCR1_I2C2_OFFSET		24
++#define MXC_CCM_CGCR1_I2C3_OFFSET		25
++#define MXC_CCM_CGCR1_IIM_OFFSET		26
++#define MXC_CCM_CGCR1_IOMUXC_OFFSET		27
++#define MXC_CCM_CGCR1_KPP_OFFSET		28
++#define MXC_CCM_CGCR1_LCDC_OFFSET		29
++#define MXC_CCM_CGCR1_OWIRE_OFFSET		30
++#define MXC_CCM_CGCR1_PWM1_OFFSET		31
++
++#define MXC_CCM_CGCR2_PWM2_OFFSET		(32 - 32)
++#define MXC_CCM_CGCR2_PWM3_OFFSET		(33 - 32)
++#define MXC_CCM_CGCR2_PWM4_OFFSET		(34 - 32)
++#define MXC_CCM_CGCR2_RNGB_OFFSET		(35 - 32)
++#define MXC_CCM_CGCR2_RTIC_OFFSET		(36 - 32)
++#define MXC_CCM_CGCR2_SCC_OFFSET		(37 - 32)
++#define MXC_CCM_CGCR2_SDMA_OFFSET		(38 - 32)
++#define MXC_CCM_CGCR2_SIM1_OFFSET		(39 - 32)
++#define MXC_CCM_CGCR2_SIM2_OFFSET		(40 - 32)
++#define MXC_CCM_CGCR2_SLCDC_OFFSET		(41 - 32)
++#define MXC_CCM_CGCR2_SPBA_OFFSET		(42 - 32)
++#define MXC_CCM_CGCR2_SSI1_OFFSET		(43 - 32)
++#define MXC_CCM_CGCR2_SSI2_OFFSET		(44 - 32)
++#define MXC_CCM_CGCR2_TCHSCRN_OFFSET		(45 - 32)
++#define MXC_CCM_CGCR2_UART1_OFFSET		(46 - 32)
++#define MXC_CCM_CGCR2_UART2_OFFSET		(47 - 32)
++#define MXC_CCM_CGCR2_UART3_OFFSET		(48 - 32)
++#define MXC_CCM_CGCR2_UART4_OFFSET		(49 - 32)
++#define MXC_CCM_CGCR2_UART5_OFFSET		(50 - 32)
++#define MXC_CCM_CGCR2_WDOG_OFFSET		(51 - 32)
++
++#define MXC_CCM_PCDR1_PERDIV1_MASK		0x3f
++
++#define MXC_CCM_MCR_USB_XTAL_MUX_OFFSET		31
++#define MXC_CCM_MCR_CLKO_EN_OFFSET		30
++#define MXC_CCM_MCR_CLKO_DIV_OFFSET		24
++#define MXC_CCM_MCR_CLKO_DIV_MASK		(0x3F << 24)
++#define MXC_CCM_MCR_CLKO_SEL_OFFSET		20
++#define MXC_CCM_MCR_CLKO_SEL_MASK		(0xF << 20)
++#define MXC_CCM_MCR_ESAI_CLK_MUX_OFFSET		19
++#define MXC_CCM_MCR_SSI2_CLK_MUX_OFFSET		18
++#define MXC_CCM_MCR_SSI1_CLK_MUX_OFFSET		17
++#define MXC_CCM_MCR_USB_CLK_MUX_OFFSET		16
++
++#define MXC_CCM_MCR_PER_CLK_MUX_MASK		(0xFFFF << 0)
++
++#define OSC24M_CLK_FREQ		24000000 /* 24MHz reference clk */
++#define OSC32K_CLK_FREQ		32768	/* 32.768kHz oscillator in */
++
++static struct clk mpll_clk;
++static struct clk upll_clk;
++static struct clk ahb_clk;
++static struct clk upll_24610k_clk;
++
++static int _clk_enable(struct clk *clk)
++{
++	unsigned long reg;
++
++	if (!clk->enable_reg)
++		return 0;
++
++	reg = __raw_readl(clk->enable_reg);
++	reg |= 1 << clk->enable_shift;
++	__raw_writel(reg, clk->enable_reg);
++
++	return 0;
++}
++
++static void _clk_disable(struct clk *clk)
++{
++	unsigned long reg;
++
++	if (!clk->enable_reg)
++		return;
++
++	reg = __raw_readl(clk->enable_reg);
++	reg &= ~(1 << clk->enable_shift);
++	__raw_writel(reg, clk->enable_reg);
++}
++
++static int _clk_upll_enable(struct clk *clk)
++{
++	unsigned long reg;
++
++	reg = __raw_readl(MXC_CCM_CCTL);
++	reg &= ~MXC_CCM_CCTL_UPLL_DISABLE;
++	__raw_writel(reg, MXC_CCM_CCTL);
++
++	while (!(__raw_readl(MXC_CCM_UPCTL) & MXC_CCM_UPCTL_LF))
++		cpu_relax();
++
++	return 0;
++}
++
++static void _clk_upll_disable(struct clk *clk)
++{
++	unsigned long reg;
++
++	reg = __raw_readl(MXC_CCM_CCTL);
++	reg |= MXC_CCM_CCTL_UPLL_DISABLE;
++	__raw_writel(reg, MXC_CCM_CCTL);
++}
++
++static int _perclk_enable(struct clk *clk)
++{
++	unsigned long reg;
++
++	reg = __raw_readl(MXC_CCM_CGCR0);
++	reg |= 1 << clk->id;
++	__raw_writel(reg, MXC_CCM_CGCR0);
++
++	return 0;
++}
++
++static void _perclk_disable(struct clk *clk)
++{
++	unsigned long reg;
++
++	reg = __raw_readl(MXC_CCM_CGCR0);
++	reg &= ~(1 << clk->id);
++	__raw_writel(reg, MXC_CCM_CGCR0);
++}
++
++static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned long reg;
++	signed long pd = 1;	/* Pre-divider */
++	signed long mfi;	/* Multiplication Factor (Integer part) */
++	signed long mfn;	/* Multiplication Factor (Integer part) */
++	signed long mfd;	/* Multiplication Factor (Denominator Part) */
++	signed long tmp;
++	unsigned long ref_freq = clk_get_rate(clk->parent);
++
++	while (((ref_freq / pd) * 10) > rate)
++		pd++;
++
++	/* the ref_freq/2 in the following is to round up */
++	mfi = (((rate / 2) * pd) + (ref_freq / 2)) / ref_freq;
++	if (mfi < 5 || mfi > 15)
++		return -EINVAL;
++
++	/* pick a mfd value that will work
++	 * then solve for mfn */
++	mfd = ref_freq / 50000;
++
++	/*
++	 *          pll_freq * pd * mfd
++	 *   mfn = --------------------  -  (mfi * mfd)
++	 *           2 * ref_freq
++	 */
++	/* the tmp/2 is for rounding */
++	tmp = ref_freq / 10000;
++	mfn = ((((((rate / 2) + (tmp / 2)) / tmp) * pd) * mfd) / 10000) -
++		(mfi * mfd);
++
++	printk(KERN_DEBUG "pll freq: %lu PD=%ld MFI=%ld MFD=%ld MFN=%ld (0x%03lx)\n",
++	       rate, pd, mfi, mfd, mfn, (mfn + ((mfn < 0) ? 1024 : 0)) & 0x3ff);
++
++	mfn = (mfn + ((mfn < 0) ? 1024 : 0)) & 0x3ff;
++	pd--;
++	mfd--;
++
++	/* Change the Pll value */
++	reg = (mfi << MXC_CCM_MPCTL_MFI_OFFSET) |
++		(mfn << MXC_CCM_MPCTL_MFN_OFFSET) |
++		(mfd << MXC_CCM_MPCTL_MFD_OFFSET) |
++		(pd << MXC_CCM_MPCTL_PD_OFFSET);
++
++	if (clk == &mpll_clk) {
++		printk(KERN_DEBUG "Changing MPCTL from %08x to %08lx\n",
++		       __raw_readl(MXC_CCM_MPCTL), reg);
++	} else if (clk == &upll_clk) {
++		printk(KERN_DEBUG "Changing UPCTL from %08x to %08lx\n",
++		       __raw_readl(MXC_CCM_UPCTL), reg);
++	}
++	if (clk == &mpll_clk)
++		__raw_writel(reg, MXC_CCM_MPCTL);
++	else if (clk == &upll_clk)
++		__raw_writel(reg, MXC_CCM_UPCTL);
++	return 0;
++}
++
++static unsigned long _clk_pll_getrate(struct clk *clk)
++{
++	unsigned long rate;
++	signed long mfi, mfn, mfd, pdf;
++	unsigned long ref_clk;
++	unsigned long reg;
++
++	ref_clk = clk_get_rate(clk->parent);
++
++	if (clk == &mpll_clk) {
++		reg = __raw_readl(MXC_CCM_MPCTL);
++		pdf = (reg & MXC_CCM_MPCTL_PD_MASK) >> MXC_CCM_MPCTL_PD_OFFSET;
++		mfd = (reg & MXC_CCM_MPCTL_MFD_MASK) >> MXC_CCM_MPCTL_MFD_OFFSET;
++		mfi = (reg & MXC_CCM_MPCTL_MFI_MASK) >> MXC_CCM_MPCTL_MFI_OFFSET;
++		mfn = (reg & MXC_CCM_MPCTL_MFN_MASK) >> MXC_CCM_MPCTL_MFN_OFFSET;
++	} else if (clk == &upll_clk) {
++		reg = __raw_readl(MXC_CCM_UPCTL);
++		pdf = (reg & MXC_CCM_UPCTL_PD_MASK) >> MXC_CCM_UPCTL_PD_OFFSET;
++		mfd = (reg & MXC_CCM_UPCTL_MFD_MASK) >> MXC_CCM_UPCTL_MFD_OFFSET;
++		mfi = (reg & MXC_CCM_UPCTL_MFI_MASK) >> MXC_CCM_UPCTL_MFI_OFFSET;
++		mfn = (reg & MXC_CCM_UPCTL_MFN_MASK) >> MXC_CCM_UPCTL_MFN_OFFSET;
++	} else {
++		BUG();		/* oops */
++	}
++
++	mfi = (mfi < 5) ? 5 : mfi;
++	rate = 2LL * ref_clk * mfn;
++	do_div(rate, mfd + 1);
++	rate = 2LL * ref_clk * mfi + rate;
++	do_div(rate, pdf + 1);
++
++	return rate;
++}
++
++static unsigned long _clk_cpu_round_rate(struct clk *clk, unsigned long rate)
++{
++	int div = clk_get_rate(clk->parent) / rate;
++
++	if (clk_get_rate(clk->parent) % rate)
++		div++;
++
++	if (div > 4)
++		div = 4;
++
++	return clk_get_rate(clk->parent) / div;
++}
++
++static int _clk_cpu_set_rate(struct clk *clk, unsigned long rate)
++{
++	int div, reg;
++	unsigned long cctl = __raw_readl(MXC_CCM_CCTL);
++
++	div = clk_get_rate(clk->parent) / rate;
++
++	if (div > 4 || div < 1 || ((clk_get_rate(clk->parent) / div) != rate))
++		return -EINVAL;
++	div--;
++
++	reg = (cctl & ~MXC_CCM_CCTL_ARM_MASK) |
++		(div << MXC_CCM_CCTL_ARM_OFFSET);
++	__raw_writel(reg, MXC_CCM_CCTL);
++
++	return 0;
++}
++
++static unsigned long _clk_cpu_getrate(struct clk *clk)
++{
++	unsigned long div;
++	unsigned long cctl = __raw_readl(MXC_CCM_CCTL);
++	unsigned long rate;
++
++	div = (cctl & MXC_CCM_CCTL_ARM_MASK) >> MXC_CCM_CCTL_ARM_OFFSET;
++
++	rate = clk_get_rate(clk->parent) / (div + 1);
++
++	if (cctl & MXC_CCM_CCTL_ARM_SRC) {
++		rate *= 3;
++		rate /= 4;
++	}
++	return rate;
++}
++
++static unsigned long _clk_ahb_getrate(struct clk *clk)
++{
++	unsigned long div;
++	unsigned long cctl = __raw_readl(MXC_CCM_CCTL);
++
++	div = (cctl & MXC_CCM_CCTL_AHB_MASK) >> MXC_CCM_CCTL_AHB_OFFSET;
++
++	return clk_get_rate(clk->parent) / (div + 1);
++}
++
++static void __iomem *pcdr_a[4] = {
++	MXC_CCM_PCDR0, MXC_CCM_PCDR1, MXC_CCM_PCDR2, MXC_CCM_PCDR3
++};
++
++static unsigned long _clk_perclkx_getrate(struct clk *clk)
++{
++	unsigned long perclk_pdf;
++	unsigned long pcdr;
++
++	if (clk->id < 0 || clk->id > 15)
++		return 0;
++
++	pcdr = __raw_readl(pcdr_a[clk->id >> 2]);
++
++	perclk_pdf =
++	    (pcdr >> ((clk->id & 3) << 3)) & MXC_CCM_PCDR1_PERDIV1_MASK;
++
++	return clk_get_rate(clk->parent) / (perclk_pdf + 1);
++}
++
++static unsigned long _clk_perclkx_round_rate(struct clk *clk,
++					     unsigned long rate)
++{
++	unsigned long div;
++
++	div = clk_get_rate(clk->parent) / rate;
++	if (clk_get_rate(clk->parent) % rate)
++		div++;
++
++	if (div > 64)
++		div = 64;
++
++	return clk_get_rate(clk->parent) / div;
++}
++
++static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned long reg;
++	unsigned long div;
++
++	if (clk->id < 0 || clk->id > 15)
++		return -EINVAL;
++
++	div = clk_get_rate(clk->parent) / rate;
++	printk(KERN_DEBUG "%s: perclk[%d] parent_rate=%lu rate=%lu div=%lu\n",
++	       __FUNCTION__, clk->id, clk_get_rate(clk->parent), rate, div);
++	if (div > 64 || div < 1 || ((clk_get_rate(clk->parent) / div) != rate))
++		return -EINVAL;
++	div--;
++
++	reg =
++	    __raw_readl(pcdr_a[clk->id >> 2]) & ~(MXC_CCM_PCDR1_PERDIV1_MASK <<
++						  ((clk->id & 3) << 3));
++	reg |= div << ((clk->id & 3) << 3);
++	__raw_writel(reg, pcdr_a[clk->id >> 2]);
++
++	return 0;
++}
++
++static int _clk_perclkx_set_parent(struct clk *clk, struct clk *parent)
++{
++	unsigned long mcr;
++
++	if (clk->parent == parent)
++		return 0;
++	if (parent != &upll_clk && parent != &ahb_clk)
++		return -EINVAL;
++
++	clk->parent = parent;
++	mcr = __raw_readl(MXC_CCM_MCR);
++	if (parent == &upll_clk)
++		mcr |= (1 << clk->id);
++	else
++		mcr &= ~(1 << clk->id);
++
++	__raw_writel(mcr, MXC_CCM_MCR);
++
++	return 0;
++}
++
++static int _clk_perclkx_set_parent3(struct clk *clk, struct clk *parent)
++{
++	unsigned long mcr = __raw_readl(MXC_CCM_MCR);
++	int bit;
++
++	if (clk->parent == parent)
++		return 0;
++	if (parent != &upll_clk && parent != &ahb_clk &&
++	    parent != &upll_24610k_clk)
++		return -EINVAL;
++
++	switch (clk->id) {
++	case 2:
++		bit = MXC_CCM_MCR_ESAI_CLK_MUX_OFFSET;
++		break;
++	case 13:
++		bit = MXC_CCM_MCR_SSI1_CLK_MUX_OFFSET;
++		break;
++	case 14:
++		bit = MXC_CCM_MCR_SSI2_CLK_MUX_OFFSET;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (parent == &upll_24610k_clk) {
++		mcr |= bit;
++		__raw_writel(mcr, MXC_CCM_MCR);
++		clk->parent = parent;
++	} else {
++		mcr &= ~bit;
++		__raw_writel(mcr, MXC_CCM_MCR);
++		return _clk_perclkx_set_parent(clk, parent);
++	}
++
++	return 0;
++}
++
++static unsigned long _clk_ipg_getrate(struct clk *clk)
++{
++	return clk_get_rate(clk->parent) / 2;	/* Always AHB / 2 */
++}
++
++/* Top-level clocks */
++static unsigned long ckih_rate = OSC24M_CLK_FREQ;
++
++static unsigned long clk_ckih_get_rate(struct clk *clk)
++{
++	return ckih_rate;
++}
++
++static unsigned long clk_ckil_get_rate(struct clk *clk)
++{
++	return OSC32K_CLK_FREQ;
++}
++
++static struct clk osc24m_clk = {
++	.get_rate = clk_ckih_get_rate,
++};
++
++static struct clk osc32k_clk = {
++	.get_rate = clk_ckil_get_rate,
++};
++
++static struct clk mpll_clk = {
++	.parent = &osc24m_clk,
++	.get_rate = _clk_pll_getrate,
++	.set_rate = _clk_pll_set_rate,
++};
++
++static struct clk upll_clk = {
++	.parent = &osc24m_clk,
++	.get_rate = _clk_pll_getrate,
++	.set_rate = _clk_pll_set_rate,
++	.enable = _clk_upll_enable,
++	.disable = _clk_upll_disable,
++};
++
++static unsigned long _clk_24610k_getrate(struct clk *clk)
++{
++	long long rate = clk_get_rate(clk->parent) * 2461LL;
++
++	do_div(rate, 24000);
++
++	return rate;	/* Always (UPLL * 24.61 / 240) */
++}
++
++static struct clk upll_24610k_clk = {
++	.parent = &upll_clk,
++	.get_rate = _clk_24610k_getrate,
++};
++
++/* Mid-level clocks */
++
++static struct clk cpu_clk = {	/* ARM clock */
++	.parent = &mpll_clk,
++	.set_rate = _clk_cpu_set_rate,
++	.get_rate = _clk_cpu_getrate,
++	.round_rate = _clk_cpu_round_rate,
++};
++
++static struct clk ahb_clk = {	/* a.k.a. HCLK */
++	.parent = &cpu_clk,
++	.get_rate = _clk_ahb_getrate,
++};
++
++static struct clk ipg_clk = {
++	.parent = &ahb_clk,
++	.get_rate = _clk_ipg_getrate,
++};
++
++/* Bottom-level clocks */
++
++struct clk usbotg_clk = {
++	.id = 0,
++	.parent = &ahb_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR0,
++	.enable_shift = MXC_CCM_CGCR0_HCLK_USBOTG_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk rtic_clk = {
++	.id = 0,
++	.parent = &ahb_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR0,
++	.enable_shift = MXC_CCM_CGCR0_HCLK_RTIC_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk emi_clk = {
++	.id = 0,
++	.parent = &ahb_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR0,
++	.enable_shift = MXC_CCM_CGCR0_HCLK_EMI_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk brom_clk = {
++	.id = 0,
++	.parent = &ahb_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR0,
++	.enable_shift = MXC_CCM_CGCR0_HCLK_BROM_OFFSET,
++	.disable = _clk_disable,
++};
++
++static struct clk per_clk[] = {
++	{
++		.id = 0,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 1,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 2,
++		.parent = &ahb_clk,	/* can be AHB or UPLL or 24.61MHz */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent3,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 3,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++	},
++	{
++		.id = 4,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 5,
++		.parent = &upll_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 6,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 7,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 8,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 9,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 10,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 11,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 12,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 13,
++		.parent = &ahb_clk,	/* can be AHB or UPLL or 24.61MHz */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent3,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 14,
++		.parent = &ahb_clk,	/* can be AHB or UPLL or 24.61MHz */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent3,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++	{
++		.id = 15,
++		.parent = &ahb_clk,	/* can be AHB or UPLL */
++		.round_rate = _clk_perclkx_round_rate,
++		.set_rate = _clk_perclkx_set_rate,
++		.set_parent = _clk_perclkx_set_parent,
++		.get_rate = _clk_perclkx_getrate,
++		.enable = _perclk_enable,
++		.disable = _perclk_disable,
++	},
++};
++
++struct clk nfc_clk = {
++	.id = 0,
++	.parent = &per_clk[8],
++};
++
++struct clk audmux_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR1,
++	.enable_shift = MXC_CCM_CGCR1_AUDMUX_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk ata_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_ATA_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &ata_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_ATA_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk can_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_CAN1_OFFSET,
++		.disable = _clk_disable,
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_CAN2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk csi_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[0],
++		.secondary = &csi_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_CSI_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &csi_clk[2],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_CSI_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk cspi_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_CSPI1_OFFSET,
++		.disable = _clk_disable,
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_CSPI2_OFFSET,
++		.disable = _clk_disable,
++	},
++	{
++		.id = 2,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_CSPI3_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk dryice_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR1,
++	.enable_shift = MXC_CCM_CGCR1_DRYICE_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk ect_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR1,
++	.enable_shift = MXC_CCM_CGCR1_ECT_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk epit1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[1],
++		.secondary = &epit1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_EPIT1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk epit2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[1],
++		.secondary = &epit2_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_EPIT2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk esai_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[2],
++		.secondary = &esai_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_ESAI_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &esai_clk[2],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_ESAI_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk esdhc1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[3],
++		.secondary = &esdhc1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_ESDHC1_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &esdhc1_clk[2],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_ESDHC1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk esdhc2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[4],
++		.secondary = &esdhc2_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_ESDHC2_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &esdhc2_clk[2],
++	},
++	{
++		.id = 1,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_ESDHC2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk fec_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_FEC_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &fec_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_FEC_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk gpio_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPIO1_OFFSET,
++		.disable = _clk_disable,
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPIO2_OFFSET,
++		.disable = _clk_disable,
++	},
++	{
++		.id = 2,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPIO3_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++static struct clk gpt1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[5],
++		.secondary = &gpt1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPT1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++static struct clk gpt2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[5],
++		.secondary = &gpt1_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPT2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++static struct clk gpt3_clk[] = {
++	{
++		.id = 2,
++		.parent = &per_clk[5],
++		.secondary = &gpt1_clk[1],
++	},
++	{
++		.id = 2,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPT3_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++static struct clk gpt4_clk[] = {
++	{
++		.id = 3,
++		.parent = &per_clk[5],
++		.secondary = &gpt1_clk[1],
++	},
++	{
++		.id = 3,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_GPT4_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk i2c_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[6],
++	},
++	{
++		.id = 1,
++		.parent = &per_clk[6],
++	},
++	{
++		.id = 2,
++		.parent = &per_clk[6],
++	},
++};
++
++struct clk iim_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR1,
++	.enable_shift = MXC_CCM_CGCR1_IIM_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk iomuxc_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR1,
++	.enable_shift = MXC_CCM_CGCR1_IOMUXC_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk kpp_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR1,
++	.enable_shift = MXC_CCM_CGCR1_KPP_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk lcdc_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[7],
++		.secondary = &lcdc_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_LCDC_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &lcdc_clk[2],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_LCDC_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk owire_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[9],
++		.secondary = &owire_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_OWIRE_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk pwm1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[10],
++		.secondary = &pwm1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR1,
++		.enable_shift = MXC_CCM_CGCR1_PWM1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk pwm2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[10],
++		.secondary = &pwm2_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_PWM2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk pwm3_clk[] = {
++	{
++		.id = 2,
++		.parent = &per_clk[10],
++		.secondary = &pwm3_clk[1],
++	},
++	{
++		.id = 2,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_PWM3_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk pwm4_clk[] = {
++	{
++		.id = 3,
++		.parent = &per_clk[10],
++		.secondary = &pwm4_clk[1],
++	},
++	{
++		.id = 3,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_PWM3_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk rngb_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR2,
++	.enable_shift = MXC_CCM_CGCR2_RNGB_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk scc_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR2,
++	.enable_shift = MXC_CCM_CGCR2_SCC_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk sdma_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_SDMA_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &sdma_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_SDMA_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk sim1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[11],
++		.secondary = &sim1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_SIM1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk sim2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[12],
++		.secondary = &sim2_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_SIM2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk slcdc_clk[] = {
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_SLCDC_OFFSET,
++		.disable = _clk_disable,
++		.secondary = &slcdc_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ahb_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR0,
++		.enable_shift = MXC_CCM_CGCR0_HCLK_SLCDC_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk spba_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR2,
++	.enable_shift = MXC_CCM_CGCR2_SPBA_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk ssi1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[13],
++		.secondary = &ssi1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_SSI1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk ssi2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[14],
++		.secondary = &ssi2_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_SSI2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk tchscrn_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR2,
++	.enable_shift = MXC_CCM_CGCR2_TCHSCRN_OFFSET,
++	.disable = _clk_disable,
++};
++
++struct clk uart1_clk[] = {
++	{
++		.id = 0,
++		.parent = &per_clk[15],
++		.secondary = &uart1_clk[1],
++	},
++	{
++		.id = 0,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_UART1_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk uart2_clk[] = {
++	{
++		.id = 1,
++		.parent = &per_clk[15],
++		.secondary = &uart2_clk[1],
++	},
++	{
++		.id = 1,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_UART2_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk uart3_clk[] = {
++	{
++		.id = 2,
++		.parent = &per_clk[15],
++		.secondary = &uart3_clk[1],
++	},
++	{
++		.id = 2,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_UART3_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk uart4_clk[] = {
++	{
++		.id = 3,
++		.parent = &per_clk[15],
++		.secondary = &uart4_clk[1],
++	},
++	{
++		.id = 3,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_UART4_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk uart5_clk[] = {
++	{
++		.id = 4,
++		.parent = &per_clk[15],
++		.secondary = &uart5_clk[1],
++	},
++	{
++		.id = 4,
++		.parent = &ipg_clk,
++		.enable = _clk_enable,
++		.enable_reg = MXC_CCM_CGCR2,
++		.enable_shift = MXC_CCM_CGCR2_UART5_OFFSET,
++		.disable = _clk_disable,
++	},
++};
++
++struct clk wdog_clk = {
++	.id = 0,
++	.parent = &ipg_clk,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_CGCR2,
++	.enable_shift = MXC_CCM_CGCR2_WDOG_OFFSET,
++	.disable = _clk_disable,
++};
++
++static unsigned long _clk_usb_round_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned long div;
++
++	div = clk_get_rate(clk->parent) / rate;
++	if (clk_get_rate(clk->parent) % rate)
++		div++;
++
++	if (div > 64)
++		return -EINVAL;
++
++	return clk_get_rate(clk->parent) / div;
++}
++
++static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned long reg;
++	unsigned long div;
++
++	div = clk_get_rate(clk->parent) / rate;
++
++	if (clk_get_rate(clk->parent) / div != rate)
++		return -EINVAL;
++	if (div > 64)
++		return -EINVAL;
++
++	reg = __raw_readl(MXC_CCM_CCTL) & ~MXC_CCM_CCTL_USB_DIV_MASK;
++	reg |= (div - 1) << MXC_CCM_CCTL_USB_DIV_OFFSET;
++	__raw_writel(reg, MXC_CCM_MCR);
++
++	return 0;
++}
++
++static unsigned long _clk_usb_getrate(struct clk *clk)
++{
++	unsigned long div =
++		__raw_readl(MXC_CCM_MCR) & MXC_CCM_CCTL_USB_DIV_MASK;
++
++	div >>= MXC_CCM_CCTL_USB_DIV_OFFSET;
++
++	return clk_get_rate(clk->parent) / (div + 1);
++}
++
++static int _clk_usb_set_parent(struct clk *clk, struct clk *parent)
++{
++	unsigned long mcr;
++
++	if (clk->parent == parent)
++		return 0;
++	if (parent != &upll_clk && parent != &ahb_clk)
++		return -EINVAL;
++
++	clk->parent = parent;
++	mcr = __raw_readl(MXC_CCM_MCR);
++	if (parent == &ahb_clk)
++		mcr |= (1 << MXC_CCM_MCR_USB_CLK_MUX_OFFSET);
++	else
++		mcr &= ~(1 << MXC_CCM_MCR_USB_CLK_MUX_OFFSET);
++
++	__raw_writel(mcr, MXC_CCM_MCR);
++
++	return 0;
++}
++
++static struct clk usb_clk = {
++	.parent = &upll_clk,
++	.get_rate = _clk_usb_getrate,
++	.set_rate = _clk_usb_set_rate,
++	.round_rate = _clk_usb_round_rate,
++	.set_parent = _clk_usb_set_parent,
++};
++
++/* CLKO */
++
++static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned long div;
++
++	div = clk_get_rate(clk->parent) / rate;
++	if (clk_get_rate(clk->parent) % rate)
++		div++;
++
++	if (div > 64)
++		return -EINVAL;
++
++	return clk_get_rate(clk->parent) / div;
++}
++
++static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
++{
++	unsigned long reg;
++	unsigned long div;
++
++	div = clk_get_rate(clk->parent) / rate;
++
++	if ((clk_get_rate(clk->parent) / div) != rate)
++		return -EINVAL;
++	if (div > 64)
++		return -EINVAL;
++
++	reg = __raw_readl(MXC_CCM_MCR) & ~MXC_CCM_MCR_CLKO_DIV_MASK;
++	reg |= (div - 1) << MXC_CCM_MCR_CLKO_DIV_OFFSET;
++	__raw_writel(reg, MXC_CCM_MCR);
++
++	return 0;
++}
++
++static unsigned long _clk_clko_getrate(struct clk *clk)
++{
++	unsigned long div = __raw_readl(MXC_CCM_MCR);
++
++	div &= MXC_CCM_MCR_CLKO_DIV_MASK;
++	div >>= MXC_CCM_MCR_CLKO_DIV_OFFSET;
++
++	return clk_get_rate(clk->parent) / (div + 1);
++}
++
++static struct clk *clko_sources[] = {
++	&osc32k_clk,		/* 0x0 */
++	&osc24m_clk,		/* 0x1 */
++	&cpu_clk,		/* 0x2 */
++	&ahb_clk,		/* 0x3 */
++	&ipg_clk,		/* 0x4 */
++	NULL,			/* 0x5 */
++	NULL,			/* 0x6 */
++	NULL,			/* 0x7 */
++	NULL,			/* 0x8 */
++	NULL,			/* 0x9 */
++	&per_clk[0],		/* 0xA */
++	&per_clk[2],		/* 0xB */
++	&per_clk[13],		/* 0xC */
++	&per_clk[14],		/* 0xD */
++	&usb_clk,		/* 0xE */
++	NULL,			/* 0xF */
++};
++
++#define NR_CLKO_SOURCES (sizeof(clko_sources) / sizeof(struct clk *))
++
++static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
++{
++	unsigned long reg;
++	struct clk **src;
++	int i;
++
++	if (clk->parent == parent)
++		return 0;
++	for (i = 0, src = clko_sources; i < NR_CLKO_SOURCES; i++, src++)
++		if (*src == parent)
++			break;
++
++	if (i == NR_CLKO_SOURCES)
++		return -EINVAL;
++
++	clk->parent = parent;
++
++	reg = __raw_readl(MXC_CCM_MCR) & ~MXC_CCM_MCR_CLKO_SEL_MASK;
++	reg |= i << MXC_CCM_MCR_CLKO_SEL_OFFSET;
++	__raw_writel(reg, MXC_CCM_MCR);
++
++	return 0;
++}
++
++static struct clk clko_clk = {
++	.set_rate = _clk_clko_set_rate,
++	.round_rate = _clk_clko_round_rate,
++	.set_parent = _clk_clko_set_parent,
++	.get_rate = _clk_clko_getrate,
++	.enable = _clk_enable,
++	.enable_reg = MXC_CCM_MCR,
++	.enable_shift = MXC_CCM_MCR_CLKO_EN_OFFSET,
++	.disable = _clk_disable,
++};
++
++#ifdef CONFIG_COMMON_CLKDEV
++#define _REGISTER_CLOCK(d, n, c) \
++	{ \
++		.dev_id = d, \
++		.con_id = n, \
++		.clk = &c, \
++	},
++
++static struct clk_lookup lookups[] = {
++	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
++	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
++	_REGISTER_CLOCK(NULL, "ata", ata_clk[0])
++	_REGISTER_CLOCK(NULL, "can", can_clk[0])
++	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
++	_REGISTER_CLOCK(NULL, "cspi.0", cspi_clk[0])
++	_REGISTER_CLOCK(NULL, "cspi.1", cspi_clk[1])
++	_REGISTER_CLOCK(NULL, "cspi.2", cspi_clk[2])
++	_REGISTER_CLOCK(NULL, "dryice", dryice_clk)
++	_REGISTER_CLOCK(NULL, "ect", ect_clk)
++	_REGISTER_CLOCK(NULL, "epit1", epit1_clk[0])
++	_REGISTER_CLOCK(NULL, "epit2", epit2_clk[0])
++	_REGISTER_CLOCK(NULL, "esai", esai_clk[0])
++	_REGISTER_CLOCK("mxc-mmc.0", NULL, esdhc1_clk[0])
++	_REGISTER_CLOCK("mxc-mmc.1", NULL, esdhc2_clk[0])
++	_REGISTER_CLOCK("fec.0", NULL, fec_clk[0])
++	_REGISTER_CLOCK(NULL, "gpio0", gpio_clk[0])
++	_REGISTER_CLOCK(NULL, "gpio1", gpio_clk[1])
++	_REGISTER_CLOCK(NULL, "gpio2", gpio_clk[2])
++	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk[0])
++	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk[0])
++	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk[0])
++	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk[0])
++	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk[0])
++	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk[1])
++	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk[2])
++	_REGISTER_CLOCK(NULL, "iim", iim_clk)
++	_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
++	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
++	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
++	_REGISTER_CLOCK(NULL, "owire", owire_clk[0])
++	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk[0])
++	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk[0])
++	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk[0])
++	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk[0])
++	_REGISTER_CLOCK(NULL, "rngb", rngb_clk)
++	_REGISTER_CLOCK(NULL, "scc", scc_clk)
++	_REGISTER_CLOCK(NULL, "sdma", sdma_clk[0])
++	_REGISTER_CLOCK(NULL, "sim1", sim1_clk[0])
++	_REGISTER_CLOCK(NULL, "sim2", sim2_clk[0])
++	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
++	_REGISTER_CLOCK(NULL, "spba", spba_clk)
++	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk[0])
++	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk[0])
++	_REGISTER_CLOCK(NULL, "tchscrn", tchscrn_clk)
++	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk[0])
++	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk[0])
++	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk[0])
++	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk[0])
++	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk[0])
++	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
++	_REGISTER_CLOCK(NULL, "usb", usb_clk)
++	_REGISTER_CLOCK(NULL, "clko", clko_clk)
++	_REGISTER_CLOCK(NULL, "brom", brom_clk)
++};
++#else
++static struct clk *mxc_clks[] = {
++	&osc24m_clk,
++	&osc32k_clk,
++	&mpll_clk,
++	&upll_clk,
++	&cpu_clk,
++	&ahb_clk,
++	&ipg_clk,
++	&per_clk[0],
++	&per_clk[1],
++	&per_clk[2],
++	&per_clk[3],
++	&per_clk[4],
++	&per_clk[5],
++	&per_clk[6],
++	&per_clk[7],
++	&per_clk[8],
++	&per_clk[9],
++	&per_clk[10],
++	&per_clk[11],
++	&per_clk[12],
++	&per_clk[13],
++	&per_clk[14],
++	&per_clk[15],
++	&nfc_clk,
++	&audmux_clk,
++	&ata_clk[0],
++	&ata_clk[1],
++	&can_clk[0],
++	&can_clk[1],
++	&csi_clk[0],
++	&csi_clk[1],
++	&csi_clk[2],
++	&cspi_clk[0],
++	&cspi_clk[1],
++	&cspi_clk[2],
++	&dryice_clk,
++	&ect_clk,
++	&epit1_clk[0],
++	&epit1_clk[1],
++	&epit2_clk[0],
++	&epit2_clk[1],
++	&esai_clk[0],
++	&esai_clk[1],
++	&esai_clk[2],
++	&esdhc1_clk[0],
++	&esdhc1_clk[1],
++	&esdhc1_clk[2],
++	&esdhc2_clk[0],
++	&esdhc2_clk[1],
++	&esdhc2_clk[2],
++	&fec_clk[0],
++	&fec_clk[1],
++	&gpio_clk[0],
++	&gpio_clk[1],
++	&gpio_clk[2],
++	&gpt1_clk[0],
++	&gpt1_clk[1],
++	&gpt2_clk[0],
++	&gpt2_clk[1],
++	&gpt3_clk[0],
++	&gpt3_clk[1],
++	&gpt4_clk[0],
++	&gpt4_clk[1],
++	&i2c_clk[0],
++	&i2c_clk[1],
++	&i2c_clk[2],
++	&iim_clk,
++	&iomuxc_clk,
++	&kpp_clk,
++	&lcdc_clk[0],
++	&lcdc_clk[1],
++	&lcdc_clk[2],
++	&owire_clk[0],
++	&owire_clk[1],
++	&pwm1_clk[0],
++	&pwm1_clk[1],
++	&pwm2_clk[0],
++	&pwm2_clk[1],
++	&pwm3_clk[0],
++	&pwm3_clk[1],
++	&pwm4_clk[0],
++	&pwm4_clk[1],
++	&rngb_clk,
++	&scc_clk,
++	&sdma_clk[0],
++	&sdma_clk[1],
++	&sim1_clk[0],
++	&sim1_clk[1],
++	&sim2_clk[0],
++	&sim2_clk[1],
++	&slcdc_clk[0],
++	&slcdc_clk[1],
++	&spba_clk,
++	&ssi1_clk[0],
++	&ssi1_clk[1],
++	&ssi2_clk[0],
++	&ssi2_clk[1],
++	&tchscrn_clk,
++	&uart1_clk[0],
++	&uart1_clk[1],
++	&uart2_clk[0],
++	&uart2_clk[1],
++	&uart3_clk[0],
++	&uart3_clk[1],
++	&uart4_clk[0],
++	&uart4_clk[1],
++	&uart5_clk[0],
++	&uart5_clk[1],
++	&wdog_clk,
++	&usb_clk,
++	&clko_clk,
++};
++#endif
++
++int __init mx25_clocks_init(unsigned long fref)
++{
++	int i;
++
++#ifdef CONFIG_COMMON_CLKDEV
++	for (i = 0; i < ARRAY_SIZE(lookups); i++) {
++		printk(KERN_DEBUG "Registering clock '%s' '%s'\n",
++		       lookups[i].dev_id ? lookups[i].dev_id : "",
++		       lookups[i].con_id ? lookups[i].con_id : "");
++		clkdev_add(&lookups[i]);
++	}
++#else
++	struct clk **clkp;
++	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
++		clk_register(*clkp);
++#endif
++	ckih_rate = fref;
++#ifndef CONFIG_DEBUG_LL
++	/* Turn off all possible clocks */
++	__raw_writel((1 << MXC_CCM_CGCR0_HCLK_EMI_OFFSET), MXC_CCM_CGCR0);
++
++	__raw_writel((1 << MXC_CCM_CGCR1_GPT1_OFFSET) |
++		     (1 << MXC_CCM_CGCR1_IIM_OFFSET), MXC_CCM_CGCR1);
++	__raw_writel(1 << MXC_CCM_CGCR2_SCC_OFFSET, MXC_CCM_CGCR2);
++#endif
++#if 1
++	/* Set all perclk sources to upll */
++	for (i = 0; i < ARRAY_SIZE(per_clk); i++) {
++		int ret;
++		unsigned long rate = per_clk[i].get_rate(&per_clk[i]);
++
++#ifdef CONFIG_DEBUG_LL
++		if (i == 15) {
++			printk(KERN_DEBUG "skipping per_clk[%d] rate=%lu\n", i, rate);
++			continue;
++		}
++#endif
++		{
++			unsigned long new_rate;
++
++			per_clk[i].set_parent(&per_clk[i], &upll_clk);
++			new_rate = per_clk[i].round_rate(&per_clk[i], rate);
++			if ((ret = per_clk[i].set_rate(&per_clk[i], new_rate)) < 0) {
++				printk(KERN_ERR "Error %d setting clk[%d] rate to %lu\n",
++				       ret, i, new_rate);
++			}
++		}
++	}
++#endif
++	/* the NFC clock must be derived from AHB clock */
++	clk_set_parent(&per_clk[8], &ahb_clk);
++	clk_set_rate(&per_clk[8], clk_get_rate(&ahb_clk) / 6);
++
++	/* This will propagate to all children and init all the clock rates */
++#if 1
++	clk_enable(&uart1_clk[0]);
++#endif
++	clk_enable(&emi_clk);
++	clk_enable(&gpio_clk[0]);
++	clk_enable(&gpio_clk[1]);
++	clk_enable(&gpio_clk[2]);
++	clk_enable(&iim_clk);
++	clk_enable(&gpt1_clk[0]);
++	clk_enable(&iomuxc_clk);
++	clk_enable(&scc_clk);
++
++	pr_info("Clock input source is %ld\n", clk_get_rate(&osc24m_clk));
++
++	pr_info("CPU: %lu.%03luMHz\n",
++		clk_get_rate(&cpu_clk) / 1000000, clk_get_rate(&cpu_clk) / 1000 % 1000);
++	pr_info("AHB: %lu.%03luMHz\n",
++		clk_get_rate(&ahb_clk) / 1000000, clk_get_rate(&ahb_clk) / 1000 % 1000);
++	pr_info("MPLL: %lu.%03luMHz\n",
++		clk_get_rate(&mpll_clk) / 1000000, clk_get_rate(&mpll_clk) / 1000 % 1000);
++	pr_info("UPLL: %lu.%03luMHz\n",
++		clk_get_rate(&upll_clk) / 1000000, clk_get_rate(&upll_clk) / 1000 % 1000);
++	clk_set_rate(&mpll_clk, clk_get_rate(&mpll_clk));
++	clk_set_rate(&upll_clk, clk_get_rate(&upll_clk));
++
++	mxc_timer_init(&gpt1_clk[0]);
++	return 0;
++}
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/clock_imx27.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/clock_imx27.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/clock_imx27.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/clock_imx27.c	2009-06-02 17:05:26.000000000 +0200
+@@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk,     0, 0,      0,
+ 		.clk = &c, \
+ 	},
+ 
+-static struct clk_lookup lookups[] __initdata = {
++static struct clk_lookup lookups[] = {
+ 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+ 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+ 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/cpu_imx25.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/cpu_imx25.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/cpu_imx25.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/cpu_imx25.c	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,65 @@
++/*
++ * arch/arm/mach-mx2/cpu_mx25.c
++ *
++ * Copyright 2009 Lothar Wassmann <LW@KARO-electronics.de>
++ * derived from: cpu_mx27.c
++ *   Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2
++ * of the License, or (at your option) any later version.
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
++ * MA 02110-1301, USA.
++ */
++
++/*
++ * i.MX25 specific CPU detection code
++ */
++
++#include <linux/io.h>
++#include <linux/module.h>
++
++#include <mach/hardware.h>
++
++static int cpu_silicon_rev = -1;
++static int cpu_partnumber;
++
++#define IIM_PREV_REG			IO_ADDRESS(IIM_BASE_ADDR + 0x20)
++#define IIM_SREV_REG			IO_ADDRESS(IIM_BASE_ADDR + 0x24)
++
++static void query_silicon_parameter(void)
++{
++	cpu_partnumber = __raw_readl(IIM_PREV_REG) >> 3;
++	cpu_silicon_rev = __raw_readl(IIM_SREV_REG);
++
++	printk(KERN_DEBUG "CPU rev: 0x%02x chip_rev: 0x%02x\n",
++	       cpu_partnumber, cpu_silicon_rev);
++	if (WARN_ON(cpu_partnumber != 0x1f)) {
++		printk(KERN_WARNING "Unsupported CPU rev: 0x%02x\n", cpu_partnumber);
++	}
++}
++
++/*
++ * Returns:
++ *	the silicon revision of the cpu
++ *	-EINVAL - not a mx25
++ */
++int mx25_revision(void)
++{
++	if (cpu_silicon_rev == -1)
++		query_silicon_parameter();
++
++	if (cpu_partnumber != 0x1f)
++		return -EINVAL;
++
++	return cpu_silicon_rev;
++}
++EXPORT_SYMBOL(mx25_revision);
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/crm_regs_mx25.h linux-2.6.30-rc4-karo/arch/arm/mach-mx2/crm_regs_mx25.h
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/crm_regs_mx25.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/crm_regs_mx25.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,190 @@
++/*
++ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#ifndef __ARCH_ARM_MACH_MX25_CRM_REGS_H__
++#define __ARCH_ARM_MACH_MX25_CRM_REGS_H__
++
++#include <mach/hardware.h>
++
++/* Register offsets */
++#define MXC_CCM_MPCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x00)
++#define MXC_CCM_UPCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x04)
++#define MXC_CCM_CCTL                (IO_ADDRESS(CCM_BASE_ADDR) + 0x08)
++#define MXC_CCM_CGCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x0C)
++#define MXC_CCM_CGCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
++#define MXC_CCM_CGCR2               (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
++#define MXC_CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
++#define MXC_CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1C)
++#define MXC_CCM_PCDR2               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
++#define MXC_CCM_PCDR3               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
++#define MXC_CCM_RCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
++#define MXC_CCM_CRDR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x2C)
++#define MXC_CCM_DCVR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
++#define MXC_CCM_DCVR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
++#define MXC_CCM_DCVR2               (IO_ADDRESS(CCM_BASE_ADDR) + 0x38)
++#define MXC_CCM_DCVR3               (IO_ADDRESS(CCM_BASE_ADDR) + 0x3C)
++#define MXC_CCM_LTR0                (IO_ADDRESS(CCM_BASE_ADDR) + 0x40)
++#define MXC_CCM_LTR1                (IO_ADDRESS(CCM_BASE_ADDR) + 0x44)
++#define MXC_CCM_LTR2                (IO_ADDRESS(CCM_BASE_ADDR) + 0x48)
++#define MXC_CCM_LTR3                (IO_ADDRESS(CCM_BASE_ADDR) + 0x4C)
++#define MXC_CCM_LTBR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x50)
++#define MXC_CCM_LTBR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x54)
++#define MXC_CCM_PMCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x58)
++#define MXC_CCM_PMCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x5C)
++#define MXC_CCM_PMCR2               (IO_ADDRESS(CCM_BASE_ADDR) + 0x60)
++#define MXC_CCM_MCR                 (IO_ADDRESS(CCM_BASE_ADDR) + 0x64)
++
++#define MXC_CCM_MPCTL_BRMO          (1 << 31)
++#define MXC_CCM_MPCTL_PD_OFFSET     26
++#define MXC_CCM_MPCTL_PD_MASK       (0xf << 26)
++#define MXC_CCM_MPCTL_MFD_OFFSET    16
++#define MXC_CCM_MPCTL_MFD_MASK      (0x3ff << 16)
++#define MXC_CCM_MPCTL_MFI_OFFSET    10
++#define MXC_CCM_MPCTL_MFI_MASK      (0xf << 10)
++#define MXC_CCM_MPCTL_MFN_OFFSET    0
++#define MXC_CCM_MPCTL_MFN_MASK      0x3ff
++#define MXC_CCM_MPCTL_LF            (1 << 15)
++
++#define MXC_CCM_UPCTL_BRMO          (1 << 31)
++#define MXC_CCM_UPCTL_PD_OFFSET     26
++#define MXC_CCM_UPCTL_PD_MASK       (0xf << 26)
++#define MXC_CCM_UPCTL_MFD_OFFSET    16
++#define MXC_CCM_UPCTL_MFD_MASK      (0x3ff << 16)
++#define MXC_CCM_UPCTL_MFI_OFFSET    10
++#define MXC_CCM_UPCTL_MFI_MASK      (0xf << 10)
++#define MXC_CCM_UPCTL_MFN_OFFSET    0
++#define MXC_CCM_UPCTL_MFN_MASK      0x3ff
++#define MXC_CCM_UPCTL_LF            (1 << 15)
++
++#define MXC_CCM_CCTL_ARM_OFFSET     30
++#define MXC_CCM_CCTL_ARM_MASK       (0x3 << 30)
++#define MXC_CCM_CCTL_AHB_OFFSET     28
++#define MXC_CCM_CCTL_AHB_MASK       (0x3 << 28)
++#define MXC_CCM_CCTL_MPLL_RST       (1 << 27)
++#define MXC_CCM_CCTL_UPLL_RST       (1 << 26)
++#define MXC_CCM_CCTL_LP_CTL_OFFSET  24
++#define MXC_CCM_CCTL_LP_CTL_MASK    (0x3 << 24)
++#define MXC_CCM_CCTL_LP_MODE_RUN    (0x0 << 24)
++#define MXC_CCM_CCTL_LP_MODE_WAIT   (0x1 << 24)
++#define MXC_CCM_CCTL_LP_MODE_DOZE   (0x2 << 24)
++#define MXC_CCM_CCTL_LP_MODE_STOP   (0x3 << 24)
++#define MXC_CCM_CCTL_UPLL_DISABLE   (1 << 23)
++#define MXC_CCM_CCTL_MPLL_BYPASS    (1 << 22)
++#define MXC_CCM_CCTL_USB_DIV_OFFSET 16
++#define MXC_CCM_CCTL_USB_DIV_MASK   (0x3 << 16)
++#define MXC_CCM_CCTL_CG_CTRL        (1 << 15)
++#define MXC_CCM_CCTL_ARM_SRC        (1 << 14)
++
++#define MXC_CCM_CGCR0_HCLK_ATA_OFFSET    16
++#define MXC_CCM_CGCR0_HCLK_BROM_OFFSET   17
++#define MXC_CCM_CGCR0_HCLK_CSI_OFFSET    18
++#define MXC_CCM_CGCR0_HCLK_EMI_OFFSET    19
++#define MXC_CCM_CGCR0_HCLK_ESAI_OFFSET   20
++#define MXC_CCM_CGCR0_HCLK_ESDHC1_OFFSET 21
++#define MXC_CCM_CGCR0_HCLK_ESDHC2_OFFSET 22
++#define MXC_CCM_CGCR0_HCLK_FEC_OFFSET    23
++#define MXC_CCM_CGCR0_HCLK_LCDC_OFFSET   24
++#define MXC_CCM_CGCR0_HCLK_RTIC_OFFSET   25
++#define MXC_CCM_CGCR0_HCLK_SDMA_OFFSET   26
++#define MXC_CCM_CGCR0_HCLK_SLCDC_OFFSET  27
++#define MXC_CCM_CGCR0_HCLK_USBOTG_OFFSET 28
++
++#define MXC_CCM_CGCR0_PER_CSI_OFFSET     0
++#define MXC_CCM_CGCR0_PER_EPIT_OFFSET    1
++#define MXC_CCM_CGCR0_PER_ESAI_OFFSET    2
++#define MXC_CCM_CGCR0_PER_ESDHC1_OFFSET  3
++#define MXC_CCM_CGCR0_PER_ESDHC2_OFFSET  4
++#define MXC_CCM_CGCR0_PER_GPT_OFFSET     5
++#define MXC_CCM_CGCR0_PER_I2C_OFFSET     6
++#define MXC_CCM_CGCR0_PER_LCDC_OFFSET    7
++#define MXC_CCM_CGCR0_PER_NFC_OFFSET     8
++#define MXC_CCM_CGCR0_PER_OWIRE_OFFSET   9
++#define MXC_CCM_CGCR0_PER_PWM_OFFSET     10
++#define MXC_CCM_CGCR0_PER_SIM1_OFFSET    11
++#define MXC_CCM_CGCR0_PER_SIM2_OFFSET    12
++#define MXC_CCM_CGCR0_PER_SSI1_OFFSET    13
++#define MXC_CCM_CGCR0_PER_SSI2_OFFSET    14
++#define MXC_CCM_CGCR0_PER_UART_OFFSET    15
++
++#define MXC_CCM_CGCR1_AUDMUX_OFFSET      0
++#define MXC_CCM_CGCR1_ATA_OFFSET         1
++#define MXC_CCM_CGCR1_CAN1_OFFSET        2
++#define MXC_CCM_CGCR1_CAN2_OFFSET        3
++#define MXC_CCM_CGCR1_CSI_OFFSET         4
++#define MXC_CCM_CGCR1_CSPI1_OFFSET       5
++#define MXC_CCM_CGCR1_CSPI2_OFFSET       6
++#define MXC_CCM_CGCR1_CSPI3_OFFSET       7
++#define MXC_CCM_CGCR1_DRYICE_OFFSET      8
++#define MXC_CCM_CGCR1_ECT_OFFSET         9
++#define MXC_CCM_CGCR1_EPIT1_OFFSET       10
++#define MXC_CCM_CGCR1_EPIT2_OFFSET       11
++#define MXC_CCM_CGCR1_ESAI_OFFSET        12
++#define MXC_CCM_CGCR1_ESDHC1_OFFSET      13
++#define MXC_CCM_CGCR1_ESDHC2_OFFSET      14
++#define MXC_CCM_CGCR1_FEC_OFFSET         15
++#define MXC_CCM_CGCR1_GPIO1_OFFSET       16
++#define MXC_CCM_CGCR1_GPIO2_OFFSET       17
++#define MXC_CCM_CGCR1_GPIO3_OFFSET       18
++#define MXC_CCM_CGCR1_GPT1_OFFSET        19
++#define MXC_CCM_CGCR1_GPT2_OFFSET        20
++#define MXC_CCM_CGCR1_GPT3_OFFSET        21
++#define MXC_CCM_CGCR1_GPT4_OFFSET        22
++#define MXC_CCM_CGCR1_I2C1_OFFSET        23
++#define MXC_CCM_CGCR1_I2C2_OFFSET        24
++#define MXC_CCM_CGCR1_I2C3_OFFSET        25
++#define MXC_CCM_CGCR1_IIM_OFFSET         26
++#define MXC_CCM_CGCR1_IOMUXC_OFFSET      27
++#define MXC_CCM_CGCR1_KPP_OFFSET         28
++#define MXC_CCM_CGCR1_LCDC_OFFSET        29
++#define MXC_CCM_CGCR1_OWIRE_OFFSET       30
++#define MXC_CCM_CGCR1_PWM1_OFFSET        31
++
++#define MXC_CCM_CGCR2_PWM2_OFFSET        (32-32)
++#define MXC_CCM_CGCR2_PWM3_OFFSET        (33-32)
++#define MXC_CCM_CGCR2_PWM4_OFFSET        (34-32)
++#define MXC_CCM_CGCR2_RNGB_OFFSET        (35-32)
++#define MXC_CCM_CGCR2_RTIC_OFFSET        (36-32)
++#define MXC_CCM_CGCR2_SCC_OFFSET         (37-32)
++#define MXC_CCM_CGCR2_SDMA_OFFSET        (38-32)
++#define MXC_CCM_CGCR2_SIM1_OFFSET        (39-32)
++#define MXC_CCM_CGCR2_SIM2_OFFSET        (40-32)
++#define MXC_CCM_CGCR2_SLCDC_OFFSET       (41-32)
++#define MXC_CCM_CGCR2_SPBA_OFFSET        (42-32)
++#define MXC_CCM_CGCR2_SSI1_OFFSET        (43-32)
++#define MXC_CCM_CGCR2_SSI2_OFFSET        (44-32)
++#define MXC_CCM_CGCR2_TCHSCRN_OFFSET     (45-32)
++#define MXC_CCM_CGCR2_UART1_OFFSET       (46-32)
++#define MXC_CCM_CGCR2_UART2_OFFSET       (47-32)
++#define MXC_CCM_CGCR2_UART3_OFFSET       (48-32)
++#define MXC_CCM_CGCR2_UART4_OFFSET       (49-32)
++#define MXC_CCM_CGCR2_UART5_OFFSET       (50-32)
++#define MXC_CCM_CGCR2_WDOG_OFFSET        (51-32)
++
++#define MXC_CCM_PCDR1_PERDIV1_MASK       0x3f
++
++#define MXC_CCM_RCSR_NF16B               (1 << 14)
++
++#define MXC_CCM_MCR_USB_XTAL_MUX_OFFSET  31
++#define MXC_CCM_MCR_CLKO_EN_OFFSET       30
++#define MXC_CCM_MCR_CLKO_DIV_OFFSET      24
++#define MXC_CCM_MCR_CLKO_DIV_MASK        (0x3F << 24)
++#define MXC_CCM_MCR_CLKO_SEL_OFFSET      20
++#define MXC_CCM_MCR_CLKO_SEL_MASK        (0xF << 20)
++#define MXC_CCM_MCR_ESAI_CLK_MUX_OFFSET  19
++#define MXC_CCM_MCR_SSI2_CLK_MUX_OFFSET  18
++#define MXC_CCM_MCR_SSI1_CLK_MUX_OFFSET  17
++#define MXC_CCM_MCR_USB_CLK_MUX_OFFSET   16
++
++#define MXC_CCM_MCR_PER_CLK_MUX_MASK     (0xFFFF << 0)
++
++#endif				/* __ARCH_ARM_MACH_MX25_CRM_REGS_H__ */
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/devices.h linux-2.6.30-rc4-karo/arch/arm/mach-mx2/devices.h
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/devices.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/devices.h	2009-06-02 17:05:27.000000000 +0200
+@@ -20,3 +20,9 @@ extern struct platform_device mxc_i2c_de
+ extern struct platform_device mxc_i2c_device1;
+ extern struct platform_device mxc_sdhc_device0;
+ extern struct platform_device mxc_sdhc_device1;
++#ifdef CONFIG_MACH_MX25
++extern struct platform_device mx25_i2c_device0;
++extern struct platform_device mx25_i2c_device1;
++extern struct platform_device mx25_i2c_device2;
++extern struct platform_device mxc_sdhc_device2;
++#endif
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/devices_mx25.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/devices_mx25.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/devices_mx25.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/devices_mx25.c	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,402 @@
++/*
++ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/gpio.h>
++#include <linux/spi/spi.h>
++
++#include <mach/hardware.h>
++#include <mach/mmc.h>
++#include <mach/spba.h>
++#include <mach/sdma.h>
++#include <mach/iomux.h>
++
++#include "sdma_script_code.h"
++
++#include "karo.h"
++
++void mx25_sdma_get_script_info(sdma_script_start_addrs * sdma_script_addr)
++{
++	sdma_script_addr->mxc_sdma_ap_2_ap_addr = ap_2_ap_ADDR;
++	sdma_script_addr->mxc_sdma_ap_2_bp_addr = -1;
++	sdma_script_addr->mxc_sdma_bp_2_ap_addr = -1;
++	sdma_script_addr->mxc_sdma_loopback_on_dsp_side_addr = -1;
++	sdma_script_addr->mxc_sdma_mcu_interrupt_only_addr = -1;
++
++	sdma_script_addr->mxc_sdma_firi_2_per_addr = -1;
++	sdma_script_addr->mxc_sdma_firi_2_mcu_addr = -1;
++	sdma_script_addr->mxc_sdma_per_2_firi_addr = -1;
++	sdma_script_addr->mxc_sdma_mcu_2_firi_addr = -1;
++
++	sdma_script_addr->mxc_sdma_uart_2_per_addr = uart_2_per_ADDR;
++	sdma_script_addr->mxc_sdma_uart_2_mcu_addr = uart_2_mcu_ADDR;
++	sdma_script_addr->mxc_sdma_per_2_app_addr = per_2_app_ADDR;
++	sdma_script_addr->mxc_sdma_mcu_2_app_addr = mcu_2_app_ADDR;
++
++	sdma_script_addr->mxc_sdma_per_2_per_addr = -1;
++
++	sdma_script_addr->mxc_sdma_uartsh_2_per_addr = uartsh_2_per_ADDR;
++	sdma_script_addr->mxc_sdma_uartsh_2_mcu_addr = uartsh_2_mcu_ADDR;
++	sdma_script_addr->mxc_sdma_per_2_shp_addr = per_2_shp_ADDR;
++	sdma_script_addr->mxc_sdma_mcu_2_shp_addr = mcu_2_shp_ADDR;
++
++	sdma_script_addr->mxc_sdma_ata_2_mcu_addr = ata_2_mcu_ADDR;
++	sdma_script_addr->mxc_sdma_mcu_2_ata_addr = mcu_2_ata_ADDR;
++
++	sdma_script_addr->mxc_sdma_app_2_per_addr = app_2_per_ADDR;
++	sdma_script_addr->mxc_sdma_app_2_mcu_addr = app_2_mcu_ADDR;
++	sdma_script_addr->mxc_sdma_shp_2_per_addr = shp_2_per_ADDR;
++	sdma_script_addr->mxc_sdma_shp_2_mcu_addr = shp_2_mcu_ADDR;
++
++	sdma_script_addr->mxc_sdma_mshc_2_mcu_addr = -1;
++	sdma_script_addr->mxc_sdma_mcu_2_mshc_addr = -1;
++
++	sdma_script_addr->mxc_sdma_spdif_2_mcu_addr = -1;
++	sdma_script_addr->mxc_sdma_mcu_2_spdif_addr = -1;
++
++	sdma_script_addr->mxc_sdma_asrc_2_mcu_addr = -1;
++
++	sdma_script_addr->mxc_sdma_dptc_dvfs_addr = -1;
++	sdma_script_addr->mxc_sdma_ext_mem_2_ipu_addr = ext_mem__ipu_ram_ADDR;
++	sdma_script_addr->mxc_sdma_descrambler_addr = -1;
++
++	sdma_script_addr->mxc_sdma_start_addr = (unsigned short *)sdma_code;
++	sdma_script_addr->mxc_sdma_ram_code_size = RAM_CODE_SIZE;
++	sdma_script_addr->mxc_sdma_ram_code_start_addr = RAM_CODE_START_ADDR;
++}
++
++#if defined(CONFIG_MXC_WATCHDOG) || defined(CONFIG_MXC_WATCHDOG_MODULE)
++static struct resource wdt_resources[] = {
++	{
++		.start = WDOG_BASE_ADDR,
++		.end = WDOG_BASE_ADDR + 0x2f,
++		.flags = IORESOURCE_MEM,
++	},
++};
++
++static struct platform_device mx25_wdt_device = {
++	.name = "mxc_wdt",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(wdt_resources),
++	.resource = wdt_resources,
++};
++
++static void mx25_init_wdt(void)
++{
++	(void)platform_device_register(&mx25_wdt_device);
++}
++#else
++static inline void mx25_init_wdt(void)
++{
++}
++#endif
++
++/*
++ * lcdc:
++ * - i.MX1: the basic controller
++ * - i.MX21: to be checked
++ * - i.MX27: like i.MX1, with slightly variations
++ */
++static struct resource mxc_fb[] = {
++	{
++		.start = LCDC_BASE_ADDR,
++		.end   = LCDC_BASE_ADDR + 0xFFF,
++		.flags = IORESOURCE_MEM,
++	},
++	{
++		.start = MXC_INT_LCDC,
++		.end   = MXC_INT_LCDC,
++		.flags = IORESOURCE_IRQ,
++	}
++};
++
++/* mxc lcd driver */
++struct platform_device mxc_fb_device = {
++	.name = "imx-fb",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(mxc_fb),
++	.resource = mxc_fb,
++	.dev = {
++		.coherent_dma_mask = 0xFFFFFFFF,
++	},
++};
++
++/* SPI controller and device data */
++#if defined(CONFIG_SPI_MXC) || defined(CONFIG_SPI_MXC_MODULE)
++
++#ifdef CONFIG_SPI_MXC_SELECT1
++/*!
++ * Resource definition for the CSPI1
++ */
++static struct resource mx25_spi1_resources[] = {
++	[0] = {
++	       .start = CSPI1_BASE_ADDR,
++	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	},
++	[1] = {
++	       .start = MXC_INT_CSPI1,
++	       .end = MXC_INT_CSPI1,
++	       .flags = IORESOURCE_IRQ,
++	},
++};
++
++/*! Platform Data for MXC CSPI1 */
++static struct mxc_spi_master mx25_spi1_data = {
++	.maxchipselect = 4,
++	.spi_version = 7,
++};
++
++/*! Device Definition for MXC CSPI1 */
++static struct platform_device mx25_spi1_device = {
++	.name = "mxc_spi",
++	.id = 0,
++	.dev = {
++		.platform_data = &mx25_spi1_data,
++	},
++	.num_resources = ARRAY_SIZE(mx25_spi1_resources),
++	.resource = mx25_spi1_resources,
++};
++
++#endif /* CONFIG_SPI_MXC_SELECT1 */
++
++#ifdef CONFIG_SPI_MXC_SELECT2
++/*!
++ * Resource definition for the CSPI2
++ */
++static struct resource mx25_spi2_resources[] = {
++	[0] = {
++	       .start = CSPI2_BASE_ADDR,
++	       .end = CSPI2_BASE_ADDR + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	},
++	[1] = {
++	       .start = MXC_INT_CSPI2,
++	       .end = MXC_INT_CSPI2,
++	       .flags = IORESOURCE_IRQ,
++	},
++};
++
++/*! Platform Data for MXC CSPI2 */
++static struct mxc_spi_master mx25_spi2_data = {
++	.maxchipselect = 4,
++	.spi_version = 7,
++};
++
++/*! Device Definition for MXC CSPI2 */
++static struct platform_device mx25_spi2_device = {
++	.name = "mxc_spi",
++	.id = 1,
++	.dev = {
++		.platform_data = &mx25_spi2_data,
++	},
++	.num_resources = ARRAY_SIZE(mx25_spi2_resources),
++	.resource = mx25_spi2_resources,
++};
++#endif /* CONFIG_SPI_MXC_SELECT2 */
++
++#ifdef CONFIG_SPI_MXC_SELECT3
++/*!
++ * Resource definition for the CSPI3
++ */
++static struct resource mx25_spi3_resources[] = {
++	[0] = {
++	       .start = CSPI3_BASE_ADDR,
++	       .end = CSPI3_BASE_ADDR + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	},
++	[1] = {
++	       .start = MXC_INT_CSPI3,
++	       .end = MXC_INT_CSPI3,
++	       .flags = IORESOURCE_IRQ,
++	},
++};
++
++/*! Platform Data for MXC CSPI3 */
++static struct mxc_spi_master mx25_spi3_data = {
++	.maxchipselect = 4,
++	.spi_version = 7,
++};
++
++/*! Device Definition for MXC CSPI3 */
++static struct platform_device mx25_spi3_device = {
++	.name = "mxc_spi",
++	.id = 2,
++	.dev = {
++		.platform_data = &mx25_spi3_data,
++	},
++	.num_resources = ARRAY_SIZE(mx25_spi3_resources),
++	.resource = mx25_spi3_resources,
++};
++#endif /* CONFIG_SPI_MXC_SELECT3 */
++
++static inline void mx25_init_spi(void)
++{
++	spba_take_ownership(SPBA_CSPI2, SPBA_MASTER_A);
++	spba_take_ownership(SPBA_CSPI3, SPBA_MASTER_A);
++
++#ifdef CONFIG_SPI_MXC_SELECT1
++	if (platform_device_register(&mx25_spi1_device) < 0)
++		printk(KERN_ERR "Error: Registering the SPI Controller_1\n");
++#endif				/* CONFIG_SPI_MXC_SELECT1 */
++#ifdef CONFIG_SPI_MXC_SELECT2
++	if (platform_device_register(&mx25_spi2_device) < 0)
++		printk(KERN_ERR "Error: Registering the SPI Controller_2\n");
++#endif				/* CONFIG_SPI_MXC_SELECT2 */
++#ifdef CONFIG_SPI_MXC_SELECT3
++	if (platform_device_register(&mx25_spi3_device) < 0)
++		printk(KERN_ERR "Error: Registering the SPI Controller_3\n");
++#endif				/* CONFIG_SPI_MXC_SELECT3 */
++}
++#else
++static inline void mx25_init_spi(void)
++{
++}
++#endif
++
++/* I2C controller and device data */
++#if defined(CONFIG_I2C_IMX) || defined(CONFIG_I2C_IMX_MODULE)
++
++/*!
++ * Resource definition for the I2C1
++ */
++static struct resource mx25_i2c1_resources[] = {
++	[0] = {
++		.start = I2C_BASE_ADDR,
++		.end = I2C_BASE_ADDR + SZ_4K - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = MXC_INT_I2C,
++		.end = MXC_INT_I2C,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++/*!
++ * Resource definition for the I2C2
++ */
++static struct resource mx25_i2c2_resources[] = {
++	[0] = {
++		.start = I2C2_BASE_ADDR,
++		.end = I2C2_BASE_ADDR + SZ_4K - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = MXC_INT_I2C2,
++		.end = MXC_INT_I2C2,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++/*!
++ * Resource definition for the I2C3
++ */
++static struct resource mx25_i2c3_resources[] = {
++	[0] = {
++		.start = I2C3_BASE_ADDR,
++		.end = I2C3_BASE_ADDR + SZ_4K - 1,
++		.flags = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start = MXC_INT_I2C3,
++		.end = MXC_INT_I2C3,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++/*! Device Definition for MXC I2C1 */
++struct platform_device mx25_i2c_device0 = {
++	.name = "imx-i2c",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(mx25_i2c1_resources),
++	.resource = mx25_i2c1_resources,
++};
++
++struct platform_device mx25_i2c_device1 = {
++	.name = "imx-i2c",
++	.id = 1,
++	.num_resources = ARRAY_SIZE(mx25_i2c2_resources),
++	.resource = mx25_i2c2_resources,
++};
++
++struct platform_device mx25_i2c_device2 = {
++	.name = "imx-i2c",
++	.id = 2,
++	.num_resources = ARRAY_SIZE(mx25_i2c3_resources),
++	.resource = mx25_i2c3_resources,
++};
++#endif
++
++static struct mxc_gpio_port mx25_gpio_ports[] = {
++	{
++		.chip.label = "gpio-1",
++		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
++		.irq = MXC_INT_GPIO1,
++		.virtual_irq_start = MXC_GPIO_IRQ_START,
++	},
++	{
++		.chip.label = "gpio-2",
++		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
++		.irq = MXC_INT_GPIO2,
++		.virtual_irq_start = MXC_GPIO_IRQ_START + 1 * 32,
++	},
++	{
++		.chip.label = "gpio-3",
++		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
++		.irq = MXC_INT_GPIO3,
++		.virtual_irq_start = MXC_GPIO_IRQ_START + 2 * 32,
++	},
++	{
++		.chip.label = "gpio-4",
++		.base = IO_ADDRESS(GPIO4_BASE_ADDR),
++		.irq = MXC_INT_GPIO4,
++		.virtual_irq_start = MXC_GPIO_IRQ_START + 3 * 32,
++	},
++};
++
++static inline void mx25_init_ssi(void)
++{
++	/* SPBA configuration for SSI - SDMA and MCU are set */
++	spba_take_ownership(SPBA_SSI1, SPBA_MASTER_A | SPBA_MASTER_C);
++	spba_take_ownership(SPBA_SSI2, SPBA_MASTER_A | SPBA_MASTER_C);
++}
++
++static struct platform_device mx25_dma_device = {
++	.name = "mxc_dma",
++	.id = 0,
++};
++
++static inline void mx25_init_dma(void)
++{
++	(void)platform_device_register(&mx25_dma_device);
++}
++
++static int __init mx25_init_devices(void)
++{
++	mx25_init_wdt();
++	mx25_init_spi();
++	mx25_init_dma();
++	mx25_init_ssi();
++
++	return 0;
++}
++arch_initcall(mx25_init_devices);
++
++int __init mxc_register_gpios(void)
++{
++	return mxc_gpio_init(mx25_gpio_ports, ARRAY_SIZE(mx25_gpio_ports));
++}
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/generic.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/generic.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/generic.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/generic.c	2009-06-02 17:05:27.000000000 +0200
+@@ -26,6 +26,7 @@
+ #include <asm/mach/map.h>
+ 
+ /* MX27 memory map definition */
++#if defined(CONFIG_MACH_MX27) || defined(CONFIG_MACH_MX21)
+ static struct map_desc mxc_io_desc[] __initdata = {
+ 	/*
+ 	 * this fixed mapping covers:
+@@ -61,7 +62,7 @@ static struct map_desc mxc_io_desc[] __i
+ 		.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
+ 		.length = X_MEMC_SIZE,
+ 		.type = MT_DEVICE
+-	}
++	},
+ };
+ 
+ /*
+@@ -82,4 +83,46 @@ void __init mx27_map_io(void)
+ 
+ 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+ }
++#endif
++
++#ifdef CONFIG_MACH_MX25
++static struct map_desc mx25_io_desc[] __initdata = {
++	{
++		.virtual	= (unsigned long)X_MEMC_BASE_ADDR_VIRT,
++		.pfn		= __phys_to_pfn(X_MEMC_BASE_ADDR),
++		.length		= X_MEMC_SIZE,
++		.type		= MT_DEVICE
++	},
++	{
++		.virtual	= (unsigned long)ASIC_BASE_ADDR_VIRT,
++		.pfn		= __phys_to_pfn(ASIC_BASE_ADDR),
++		.length		= ASIC_SIZE,
++		.type		= MT_DEVICE_NONSHARED
++	},
++	{
++		.virtual	= (unsigned long)AIPS1_BASE_ADDR_VIRT,
++		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
++		.length		= AIPS1_SIZE,
++		.type		= MT_DEVICE_NONSHARED
++	},
++	{
++		.virtual	= (unsigned long)AIPS2_BASE_ADDR_VIRT,
++		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
++		.length		= AIPS2_SIZE,
++		.type		= MT_DEVICE_NONSHARED
++	},
++	{
++		.virtual	= (unsigned long)SPBA0_BASE_ADDR_VIRT,
++		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
++		.length		= SPBA0_SIZE,
++		.type		= MT_DEVICE_NONSHARED
++	},
++};
++
++void __init mx25_map_io(void)
++{
++	mxc_set_cpu_type(MXC_CPU_MX25);
+ 
++	iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
++}
++#endif
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/karo-tx25.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/karo-tx25.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/karo-tx25.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/karo-tx25.c	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,1115 @@
++/*
++ * arch/arm/mach-mx2/karo-tx25.c
++ *
++ * Copyright (C) 2008  Lothar Wassmann <LW@KARO-electronics.de>
++ *
++ * based on: arch/arm/mach-mx27ads.c (C) Freescale Semiconductor, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the:
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
++ *
++ * This file adds support for the Ka-Ro electronics TX25 processor modules
++ */
++
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++//#include <linux/i2c.h>
++//#include <linux/i2c/at24.h>
++#include <linux/spi/spi.h>
++#include <linux/serial_8250.h>
++#include <linux/fec_enet.h>
++#if defined(CONFIG_MTD) || defined(CONFIG_MTD_MODULE)
++#include <mtd/mtd-abi.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <asm/mach/flash.h>
++#endif
++
++#include <linux/serial.h>
++#include <linux/fsl_devices.h>
++#include <linux/irq.h>
++#include <linux/mmc/host.h>
++#include <linux/leds.h>
++
++#include <asm/setup.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/time.h>
++#include <mach/common.h>
++#include <mach/hardware.h>
++#include <mach/gpio.h>
++#include <mach/iomux.h>
++#include <mach/irqs.h>
++#include <mach/clock.h>
++#include <mach/imxfb.h>
++//#include <mach/imx_spi.h>
++//#include <mach/i2c.h>
++#include <mach/mmc.h>
++#include <mach/imx-uart.h>
++#include <mach/mxc_nand.h>
++//#include <mach/ulpi.h>
++//#include <mach/mxc_ehci.h>
++//#include <mach/board-tx25.h>
++
++#include "crm_regs.h"
++#include "devices.h"
++#include "karo.h"
++
++#ifdef DEBUG
++int tx25_debug = 1;
++module_param(tx25_debug, int, S_IRUGO | S_IWUSR);
++#else
++static int tx25_debug;
++module_param(tx25_debug, int, 0);
++#endif
++
++//#include "karo.h"
++
++int karo_board_type = 0;
++int karo_mod_type = -1;
++
++
++#ifdef CONFIG_USB_EHCI_MXC
++
++#define SMSC_VENDOR_ID		0x0424
++#define USB3317_PROD_ID		0x0006
++#define ULPI_FCTL		7
++
++static inline const char *ulpi_name(void __iomem *view)
++{
++	if ((unsigned long)view & 0x400) {
++		return "USBH2";
++	} else {
++		return "USBOTG";
++	}
++}
++
++static int usb3317_init(void __iomem *view)
++{
++	int vid, pid, ret;
++#if 1
++	/* This is a kludge until we know why we sometimes read a wrong
++	 * vendor or product ID!
++	 */
++	int retries = 3;
++
++ retry:
++#endif
++	ret = ulpi_read(ISP1504_VID_HIGH, view);
++	if (ret < 0) {
++		goto err;
++	}
++	vid = ret << 8;
++
++	ret = ulpi_read(ISP1504_VID_LOW, view);
++	if (ret < 0) {
++		goto err;
++	}
++	vid |= ret;
++
++	ret = ulpi_read(ISP1504_PID_HIGH, view);
++	if (ret < 0) {
++		goto err;
++	}
++	pid = ret << 8;
++
++	ret = ulpi_read(ISP1504_PID_LOW, view);
++	if (ret < 0) {
++		goto err;
++	}
++	pid |= ret;
++
++	pr_info("ULPI on %s port Vendor ID 0x%x Product ID 0x%x\n",
++		ulpi_name(view), vid, pid);
++	if (vid != SMSC_VENDOR_ID || pid != USB3317_PROD_ID) {
++		if (retries-- < 0) {
++			pr_err("No USB3317 found\n");
++			return -ENODEV;
++		}
++		goto retry;
++	}
++ err:
++	if (ret < 0) {
++		printk(KERN_ERR "ULPI read on %s port failed with error %d\n",
++		       ulpi_name(view), ret);
++		return ret;
++	}
++	return 0;
++}
++
++static int usb3317_set_vbus_power(void __iomem *view, int on)
++{
++	int ret;
++
++	DBG(0, "%s: Switching %s port VBUS power %s\n", __FUNCTION__,
++	    ulpi_name(view), on ? "on" : "off");
++
++	if (on) {
++		ret = ulpi_set(DRV_VBUS_EXT |		/* enable external Vbus */
++			       DRV_VBUS |		/* enable internal Vbus */
++			       CHRG_VBUS,		/* charge Vbus */
++			       ISP1504_OTGCTL, view);
++	} else {
++		ret = ulpi_clear(DRV_VBUS_EXT |		/* disable external Vbus */
++				 DRV_VBUS,		/* disable internal Vbus */
++				 ISP1504_OTGCTL, view);
++		if (ret == 0) {
++			ret = ulpi_set(DISCHRG_VBUS,	   /* discharge Vbus */
++				       ISP1504_OTGCTL, view);
++		}
++	}
++	if (ret < 0) {
++		printk(KERN_ERR "ULPI read on %s port failed with error %d\n",
++		       ulpi_name(view), ret);
++		return ret;
++	}
++	return 0;
++}
++
++static int tx25_usbh2_init(struct platform_device *pdev)
++{
++	int ret;
++	u32 temp;
++	unsigned long flags;
++	void __iomem *view = IO_ADDRESS(OTG_BASE_ADDR + 0x570);
++
++	local_irq_save(flags);
++	temp = readl(IO_ADDRESS(OTG_BASE_ADDR) + 0x600);
++	temp &= ~((3 << 21) | (1 << 0));
++	temp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20);
++	writel(temp, IO_ADDRESS(OTG_BASE_ADDR) + 0x600);
++	local_irq_restore(flags);
++
++	/* select ULPI transceiver */
++	/* this must be done _before_ setting up the GPIOs! */
++	temp = readl(view + 0x14);
++	DBG(0, "%s: Changing USBH2_PORTSC1 from %08x to %08x\n", __FUNCTION__,
++	    temp, (temp & ~(3 << 30)) | (2 << 30));
++	temp &= ~(3 << 30);
++	temp |= 2 << 30;
++	writel(temp, view + 0x14);
++
++	/* Set to Host mode */
++	temp = readl(view + 0x38);
++	DBG(0, "%s: Changing USBH2_USBMODE from %08x to %08x\n", __FUNCTION__,
++	    temp, temp | 3);
++	writel(temp | 0x3, view + 0x38);
++
++	ret = gpio_usbh2_active();
++	if (ret != 0) {
++		return ret;
++	}
++
++	ret = usb3317_init(view);
++	if (ret != 0) {
++		goto err;
++	}
++	ret = usb3317_set_vbus_power(view, 1);
++	if (ret != 0) {
++		goto err;
++	}
++	return 0;
++
++ err:
++	gpio_usbh2_inactive();
++	return ret;
++}
++
++static int tx25_usbh2_exit(struct platform_device *pdev)
++{
++	gpio_usbh2_inactive();
++	return 0;
++}
++
++static struct mxc_usbh_platform_data tx25_usbh2_data = {
++	.init = tx25_usbh2_init,
++	.exit = tx25_usbh2_exit,
++};
++
++int tx25_usbh2_register(void)
++{
++	int ret;
++
++	ret = mxc_register_device(&mxc_ehci2, &tx25_usbh2_data);
++	return ret;
++}
++device_initcall(tx25_usbh2_register);
++#endif // CONFIG_USB_EHCI_MXC
++
++//#define FEC_MII_IRQ		IRQ_GPIOD(8)
++
++#if defined(CONFIG_FEC) || defined(CONFIG_FEC_MODULE)
++static struct resource fec_resources[] = {
++	{
++		.start	= FEC_BASE_ADDR,
++		.end	= FEC_BASE_ADDR + 0x18f,
++		.flags	= IORESOURCE_MEM,
++	}, {
++		.start	= FEC_BASE_ADDR + 0x200,
++		.end	= FEC_BASE_ADDR + 0x30b,
++		.flags	= IORESOURCE_MEM,
++	}, {
++		.start	= MXC_INT_FEC,
++		.end	= MXC_INT_FEC,
++		.flags	= IORESOURCE_IRQ,
++#ifdef FEC_MII_IRQ
++	}, {
++		.start	= FEC_MII_IRQ,
++		.end	= FEC_MII_IRQ,
++		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
++#endif
++	},
++};
++
++/*
++ * Setup GPIO for FEC device to be active
++ *
++ */
++static struct pad_desc karo_tx25_fec_gpios_off[] = {
++	MX25_PAD_FEC_MDC__GPIO_3_5,
++	MX25_PAD_FEC_MDIO__GPIO_3_6,
++	MX25_PAD_FEC_TDATA0__GPIO_3_7,
++	MX25_PAD_FEC_TDATA1__GPIO_3_8,
++	MX25_PAD_FEC_TX_EN__GPIO_3_9,
++	MX25_PAD_FEC_RDATA0__GPIO_3_10,
++	MX25_PAD_FEC_RDATA1__GPIO_3_11,
++	MX25_PAD_FEC_RX_DV__GPIO_3_12,
++	MX25_PAD_FEC_TX_CLK__GPIO_3_13,
++	MX25_PAD_D12__GPIO_4_8,
++	MX25_PAD_D10__GPIO_4_10,
++};
++
++static struct pad_desc karo_tx25_fec_pwr_gpios[] = {
++	MX25_PAD_D11__GPIO_4_9,		/* FEC PHY power on pin */
++	MX25_PAD_D13__GPIO_4_7,		/* FEC reset */
++};
++
++static struct pad_desc karo_tx25_fec_gpios_on[] = {
++	MX25_PAD_FEC_MDC__FEC_MDC,
++	MX25_PAD_FEC_MDIO__FEC_MDIO,
++	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
++	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
++	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
++	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
++	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
++	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
++	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
++	MX25_PAD_D12__GPIO_4_8,
++	MX25_PAD_D10__GPIO_4_10,
++};
++
++static struct gpio_desc {
++	unsigned int gpio:7;
++	unsigned int dir:1;
++	unsigned int level:1;
++} karo_tx25_fec_strap_gpios[] = {
++	/* configure the PHY strap pins to the correct values */
++	{ GPIO_PORTC |  5, 1, 0, },
++	{ GPIO_PORTC |  6, 1, 0, },
++	{ GPIO_PORTC |  7, 1, 0, },
++	{ GPIO_PORTC |  8, 1, 0, },
++	{ GPIO_PORTC |  9, 1, 0, },
++	{ GPIO_PORTC | 10, 1, 1, },
++	{ GPIO_PORTC | 11, 1, 1, },
++	{ GPIO_PORTC | 12, 0, 1, },
++	{ GPIO_PORTC | 13, 1, 0, },
++
++	{ GPIO_PORTD |  8, 0, 0, },
++	{ GPIO_PORTD | 10, 0, 0, },
++	{ GPIO_PORTD |  9, 1, 1, },
++	{ GPIO_PORTD |  7, 1, 0, },
++};
++
++#define TX25_FEC_PWR_GPIO	(GPIO_PORTD | 9)
++#define TX25_FEC_RST_GPIO	(GPIO_PORTD | 7)
++
++static int gpio_fec_active(void)
++{
++	int ret;
++	int i;
++
++#ifdef FEC_MII_IRQ
++	DBG(0, "%s: Using IRQ %d (GPIO %d) for MII\n", __FUNCTION__,
++	    FEC_MII_IRQ, irq_to_gpio(FEC_MII_IRQ));
++
++	set_irq_type(FEC_MII_IRQ, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING);
++#endif
++	ret = mxc_iomux_v3_setup_multiple_pads(karo_tx25_fec_pwr_gpios,
++					       ARRAY_SIZE(karo_tx25_fec_pwr_gpios));
++	if (ret) {
++		return ret;
++	}
++	/*
++	 * If the PHY is already powered on, assume it has been
++	 * correctly configured (by the boot loader)
++	*/
++	if (0 && gpio_get_value(TX25_FEC_PWR_GPIO) &&
++	    gpio_get_value(TX25_FEC_RST_GPIO)) {
++		ret = mxc_iomux_v3_setup_multiple_pads(karo_tx25_fec_gpios_on,
++						       ARRAY_SIZE(karo_tx25_fec_gpios_on));
++		if (ret) {
++			mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_pwr_gpios,
++							   ARRAY_SIZE(karo_tx25_fec_pwr_gpios));
++			return ret;
++		}
++	} else {
++		/* switch PHY strap pins into required state */
++		ret = mxc_iomux_v3_setup_multiple_pads(karo_tx25_fec_gpios_off,
++						       ARRAY_SIZE(karo_tx25_fec_gpios_off));
++		if (ret) {
++			mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_pwr_gpios,
++							   ARRAY_SIZE(karo_tx25_fec_pwr_gpios));
++			return ret;
++		}
++		DBG(0, "%s: Switching FEC PHY power on\n", __FUNCTION__);
++		//gpio_set_value(TX25_FEC_PWR_GPIO, 1);
++#if 0
++		while (1) {
++			gpio_set_value(TX25_FEC_PWR_GPIO, 1);
++			mdelay(1000);
++			gpio_set_value(TX25_FEC_PWR_GPIO, 0);
++			mdelay(1000);
++		}
++#endif
++		DBG(0, "%s: Asserting FEC PHY reset\n", __FUNCTION__);
++//		gpio_set_value(TX25_FEC_RST_GPIO, 0);
++		for (i = 0; i < ARRAY_SIZE(karo_tx25_fec_strap_gpios); i++) {
++			struct gpio_desc *pd = &karo_tx25_fec_strap_gpios[i];
++
++			ret = gpio_request(pd->gpio, "FEC");
++			if (ret < 0) {
++				DBG(0, "%s: Failed to request GPIO%d_%d: %d\n",
++				    __FUNCTION__, pd->gpio / 32 + 1, pd->gpio % 32, ret);
++				goto rel_mux;
++			}
++			if (pd->dir) {
++				gpio_direction_output(pd->gpio,
++						      pd->level);
++			} else {
++				gpio_direction_input(pd->gpio);
++			}
++		}
++#ifdef DEBUG
++		for (i = 0; i < ARRAY_SIZE(karo_tx25_fec_strap_gpios); i++) {
++			struct gpio_desc *pd = &karo_tx25_fec_strap_gpios[i];
++			int grp = pd->gpio / 32 + 1;
++			int ofs = pd->gpio % 32;
++
++			if (pd->dir && pd->level != gpio_get_value(pd->gpio)) {
++				DBG(0, "%s: GPIO%d_%d is %d instead of %d\n", __FUNCTION__,
++				    grp, ofs, gpio_get_value(pd->gpio),
++				    pd->level);
++			}
++		}
++#endif
++		DBG(0, "%s: Delaying for 22ms\n", __FUNCTION__);
++		mdelay(22);
++		DBG(0, "%s: Deasserting FEC PHY reset\n", __FUNCTION__);
++		gpio_set_value(TX25_FEC_RST_GPIO, 1);
++#ifdef DEBUG
++		for (i = 0; i < ARRAY_SIZE(karo_tx25_fec_strap_gpios); i++) {
++			struct gpio_desc *pd = &karo_tx25_fec_strap_gpios[i];
++			int grp = pd->gpio / 32 + 1;
++			int ofs = pd->gpio % 32;
++
++			DBG(0, "%s: GPIO%d_%d is %d\n", __FUNCTION__,
++			    grp, ofs, gpio_get_value(pd->gpio));
++		}
++#endif
++		mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_gpios_off,
++						   ARRAY_SIZE(karo_tx25_fec_gpios_off));
++		ret = mxc_iomux_v3_setup_multiple_pads(karo_tx25_fec_gpios_on,
++						       ARRAY_SIZE(karo_tx25_fec_gpios_on));
++		if (ret) {
++			goto rel_gpio;
++		}
++#ifdef DEBUG
++		for (i = 0; i < ARRAY_SIZE(karo_tx25_fec_strap_gpios); i++) {
++			struct gpio_desc *pd = &karo_tx25_fec_strap_gpios[i];
++			int grp = pd->gpio / 32 + 1;
++			int ofs = pd->gpio % 32;
++
++			DBG(0, "%s: GPIO%d_%d is %d\n", __FUNCTION__,
++			    grp, ofs, gpio_get_value(pd->gpio));
++		}
++#endif
++	}
++	return ret;
++
++ rel_mux:
++	mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_gpios_off,
++					   ARRAY_SIZE(karo_tx25_fec_gpios_off));
++ rel_gpio:
++	while (--i >= 0) {
++		struct gpio_desc *pd = &karo_tx25_fec_strap_gpios[i];
++#ifdef DEBUG
++		int grp = pd->gpio / 32 + 1;
++		int ofs = pd->gpio % 32;
++
++		DBG(0, "%s: Freeing GPIO%d_%d\n", __FUNCTION__,
++		    grp, ofs);
++#endif
++		gpio_free(pd->gpio);
++	}
++	mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_pwr_gpios,
++					   ARRAY_SIZE(karo_tx25_fec_pwr_gpios));
++	return ret;
++}
++
++/*
++ * Setup GPIO for FEC device to be inactive
++ *
++ */
++static void gpio_fec_inactive(void)
++{
++	int i;
++
++	mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_gpios_on,
++					   ARRAY_SIZE(karo_tx25_fec_gpios_on));
++	mxc_iomux_v3_setup_multiple_pads(karo_tx25_fec_gpios_off,
++					 ARRAY_SIZE(karo_tx25_fec_gpios_off));
++	DBG(0, "%s: Asserting FEC PHY reset\n", __FUNCTION__);
++	gpio_set_value(TX25_FEC_RST_GPIO, 0);
++	DBG(0, "%s: Switching FEC PHY power off\n", __FUNCTION__);
++	gpio_set_value(TX25_FEC_PWR_GPIO, 0);
++
++	mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_gpios_off,
++					   ARRAY_SIZE(karo_tx25_fec_gpios_off));
++	mxc_iomux_v3_release_multiple_pads(karo_tx25_fec_pwr_gpios,
++					   ARRAY_SIZE(karo_tx25_fec_pwr_gpios));
++	for (i = 0; i < ARRAY_SIZE(karo_tx25_fec_strap_gpios); i++) {
++		struct gpio_desc *pd = &karo_tx25_fec_strap_gpios[i];
++#ifdef DEBUG
++		int grp = pd->gpio / 32 + 1;
++		int ofs = pd->gpio % 32;
++
++		DBG(0, "%s: Freeing GPIO%d_%d\n", __FUNCTION__,
++		    grp, ofs);
++#endif
++		gpio_free(pd->gpio);
++	}
++}
++
++static struct clk *tx25_fec_clk;
++
++static int tx25_fec_suspend(struct platform_device *pdev)
++{
++	BUG_ON(tx25_fec_clk == NULL);
++	DBG(1, "%s: Switching FEC PHY off\n", __FUNCTION__);
++	gpio_fec_inactive();
++	clk_disable(tx25_fec_clk);
++	return 0;
++}
++
++static int tx25_fec_resume(struct platform_device *pdev)
++{
++	BUG_ON(tx25_fec_clk == NULL);
++	DBG(1, "%s: Switching FEC PHY on\n", __FUNCTION__);
++	clk_enable(tx25_fec_clk);
++	gpio_fec_active();
++	return 0;
++}
++
++#if 0
++/*
++ * i.MX25 allows RMII mode to be configured via a gasket
++ */
++#define FEC_MIIGSK_CFGR_FRCONT (1 << 6)
++#define FEC_MIIGSK_CFGR_LBMODE (1 << 4)
++#define FEC_MIIGSK_CFGR_EMODE (1 << 3)
++#define FEC_MIIGSK_CFGR_IF_MODE_MASK (3 << 0)
++#define FEC_MIIGSK_CFGR_IF_MODE_MII (0 << 0)
++#define FEC_MIIGSK_CFGR_IF_MODE_RMII (1 << 0)
++
++#define FEC_MIIGSK_ENR_READY (1 << 2)
++#define FEC_MIIGSK_ENR_EN (1 << 1)
++
++#include "../arch/arm/mach-mx25/crm_regs.h"
++static void __inline__ fec_localhw_setup(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++
++	/*
++	 * Set up the MII gasket for RMII mode
++	 */
++	printk("%s: enable RMII gasket\n", dev->name);
++
++	/* disable the gasket and wait */
++	fec_reg_write16(fep, FEC_MIIGSK_ENR, 0);
++	while (fec_reg_read16(fep, FEC_MIIGSK_ENR) & FEC_MIIGSK_ENR_READY)
++		udelay(1);
++
++	/* configure the gasket for RMII, 50 MHz, no loopback, no echo */
++	fec_reg_write16(fep, FEC_MIIGSK_CFGR, FEC_MIIGSK_CFGR_IF_MODE_RMII);
++
++	/* re-enable the gasket */
++	fec_reg_write16(fep, FEC_MIIGSK_ENR, FEC_MIIGSK_ENR_EN);
++	fec_reg_read16(fep, FEC_MIIGSK_CFGR);
++	fec_reg_read16(fep, FEC_MIIGSK_ENR);
++}
++#endif
++
++static int fec_arch_init(struct platform_device *pdev)
++{
++	int ret;
++
++	DBG(0, "%s: Activating FEC GPIOs\n", __FUNCTION__);
++	dump_regs();
++
++	ret = gpio_fec_active();
++	if (ret) {
++		printk(KERN_ERR "%s: could not enable FEC gpios: %d\n", __FUNCTION__, ret);
++		return ret;
++	}
++
++	BUG_ON(tx25_fec_clk != NULL);
++	tx25_fec_clk = clk_get(&pdev->dev, NULL);
++	if (unlikely(IS_ERR(tx25_fec_clk))) {
++		printk(KERN_ERR "Failed to get fec_clk\n");
++		return PTR_ERR(tx25_fec_clk);
++	}
++	DBG(0, "%s: Enabling FEC clock\n", __FUNCTION__);
++	clk_enable(tx25_fec_clk);
++	dump_regs();
++	return 0;
++}
++
++static void fec_arch_exit(struct platform_device *pdev)
++{
++	BUG_ON(tx25_fec_clk == NULL);
++	if (unlikely(IS_ERR(tx25_fec_clk))) {
++		printk(KERN_ERR "Failed to get fec_clk\n");
++		return;
++	}
++	DBG(0, "%s: Disabling FEC clock\n", __FUNCTION__);
++	clk_disable(tx25_fec_clk);
++	clk_put(tx25_fec_clk);
++	tx25_fec_clk = NULL;
++	DBG(0, "%s: Deactivating FEC GPIOs\n", __FUNCTION__);
++	gpio_fec_inactive();
++}
++
++static struct fec_enet_platform_data fec_data = {
++	.arch_init = fec_arch_init,
++	.arch_exit = fec_arch_exit,
++	.suspend = tx25_fec_suspend,
++	.resume = tx25_fec_resume,
++};
++
++static struct platform_device fec_device = {
++	.name		= "fec",
++	.id		= 0,
++	.num_resources	= ARRAY_SIZE(fec_resources),
++	.resource	= fec_resources,
++	.dev = {
++		.platform_data = &fec_data,
++		.coherent_dma_mask = 0xFFFFFFFF,
++	},
++};
++#endif
++
++/* MTD NAND flash */
++#if defined(CONFIG_MTD_NAND_MXC) || defined(CONFIG_MTD_NAND_MXC_MODULE)
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2
++static struct mtd_partition tx25_nand_partitions[] = {
++	{
++		.name = "RedBoot",
++		.offset = 0,
++		.size = 0x00040000,
++	}, {
++		.name = "kernel",
++		.offset = MTDPART_OFS_APPEND,
++		.size = 0x001A0000,
++	}, {
++		.name = "rootfs",
++		.offset = MTDPART_OFS_APPEND,
++		.size = 0x07E000000,
++	}, {
++		.name = "FIS directory",
++		.offset = MTDPART_OFS_APPEND,
++		.size = 0x00003000,
++		.mask_flags = MTD_WRITEABLE,
++	}, {
++		.name = "RedBoot config",
++		.offset = MTDPART_OFS_APPEND,
++		.size = 0x00001000,
++		.mask_flags = MTD_WRITEABLE,
++	},
++};
++
++static struct pad_desc karo_tx25_nand_pads[] = {
++	MX25_PAD_NF_CE0__NF_CE0,
++	MX25_PAD_NFWE_B__NFWE_B,
++	MX25_PAD_NFRE_B__NFRE_B,
++	MX25_PAD_NFALE__NFALE,
++	MX25_PAD_NFCLE__NFCLE,
++	MX25_PAD_NFWP_B__NFWP_B,
++	MX25_PAD_NFRB__NFRB,
++	MX25_PAD_D7__D7,
++	MX25_PAD_D6__D6,
++	MX25_PAD_D5__D5,
++	MX25_PAD_D4__D4,
++	MX25_PAD_D3__D3,
++	MX25_PAD_D2__D2,
++	MX25_PAD_D1__D1,
++	MX25_PAD_D0__D0,
++};
++
++static int tx25_nand_init(void)
++{
++	int ret;
++
++	DBG(0, "%s: Configuring NAND pins\n", __FUNCTION__);
++	ret = mxc_iomux_v3_setup_multiple_pads(karo_tx25_nand_pads,
++					       ARRAY_SIZE(karo_tx25_nand_pads));
++	if (ret) {
++		return ret;
++	}
++	return 0;
++}
++
++static void tx25_nand_exit(void)
++{
++	mxc_iomux_v3_release_multiple_pads(karo_tx25_nand_pads,
++					   ARRAY_SIZE(karo_tx25_nand_pads));
++}
++
++static struct flash_platform_data tx25_nand_data = {
++	.map_name = "nand_probe",
++	.name = "tx25-nand",
++	.parts = tx25_nand_partitions,
++	.nr_parts = ARRAY_SIZE(tx25_nand_partitions),
++	.width = 1,
++	.init = tx25_nand_init,
++	.exit = tx25_nand_exit,
++};
++#else
++static struct mxc_nand_platform_data tx25_nand_data = {
++	.hw_ecc = 1,
++	.width = 1,
++};
++#endif
++
++static struct resource tx25_nand_resources[] = {
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V1_1
++	{
++		.start	= NFC_BASE_ADDR + 0x1e00,
++		.end	= NFC_BASE_ADDR + 0x1e2f,
++		.flags	= IORESOURCE_MEM,
++	}, {
++		.start	= NFC_BASE_ADDR,
++		.end	= NFC_BASE_ADDR + 0x11ff,
++		.flags	= IORESOURCE_MEM,
++#else
++	{
++		.start	= NFC_BASE_ADDR,
++		.end	= NFC_BASE_ADDR + 0x1e2f,
++		.flags	= IORESOURCE_MEM,
++#endif
++	}, {
++		.start	= MXC_INT_NANDFC,
++		.end	= MXC_INT_NANDFC,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device tx25_nand_mtd_device = {
++	.name = "mxc_nand",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(tx25_nand_resources),
++	.resource = tx25_nand_resources,
++	.dev = {
++		.platform_data = &tx25_nand_data,
++	},
++};
++#endif
++
++#if defined(CONFIG_VIDEO_MXC_EMMA_OUTPUT) || defined(CONFIG_VIDEO_MXC_EMMA_OUTPUT_MODULE)
++static u64 mxc_emma_dmamask = 0xffffffffUL;
++
++static struct platform_device tx25_v4l2out_device = {
++	.name = "MXC Video Output",
++	.id = 0,
++	.dev = {
++		.dma_mask = &mxc_emma_dmamask,
++		.coherent_dma_mask = ~0UL,
++	},
++};
++#endif
++
++#if 0
++#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
++static struct pad_desc mxc_i2c0_pins[] = {
++	/*
++	 * it seems the data line misses a pullup, so we must enable
++	 * the internal pullup as a local workaround
++	 */
++	MX25_PAD_I2C1_CLK__I2C1_CLK,
++	MX25_PAD_I2C1_DAT__I2C1_DAT,
++};
++
++static int karo_tx25_i2c_0_init(struct device *dev)
++{
++	DBG(-1, "%s: \n", __FUNCTION__);
++	return mxc_iomux_v3_setup_multiple_pads(mxc_i2c0_pins,
++						ARRAY_SIZE(mxc_i2c0_pins));
++}
++
++static void karo_tx25_i2c_0_exit(struct device *dev)
++{
++	DBG(-1, "%s: \n", __FUNCTION__);
++	mxc_iomux_v3_release_multiple_pads(mxc_i2c0_pins,
++					   ARRAY_SIZE(mxc_i2c0_pins));
++}
++
++static struct imxi2c_platform_data karo_tx25_i2c_0_data = {
++	.bitrate = 100000,
++	.init = karo_tx25_i2c_0_init,
++	.exit = karo_tx25_i2c_0_exit,
++};
++
++static struct at24_platform_data karo_tx25_eeprom = {
++	.byte_len = 2048,
++	.page_size = 32,
++	.flags = AT24_FLAG_ADDR16 | AT24_FLAG_TAKE8ADDR,
++};
++
++static struct i2c_board_info karo_i2c_0_boardinfo[] __initdata = {
++	{
++		I2C_BOARD_INFO("24c16", 0x50),
++		.platform_data = &karo_tx25_eeprom,
++		.type = "24c16",
++	},
++};
++
++int __init karo_i2c_init(void)
++{
++	int ret;
++
++	DBG(0, "%s: Registering I2C bus 0\n", __FUNCTION__);
++	ret = mxc_register_device(&mx25_i2c_device0, &karo_tx25_i2c_0_data);
++	if (ret != 0) {
++		printk(KERN_ERR "Failed to register I2C device: %d\n", ret);
++		return ret;
++	}
++	ret = i2c_register_board_info(0, karo_i2c_0_boardinfo,
++				      ARRAY_SIZE(karo_i2c_0_boardinfo));
++	if (ret != 0) {
++		printk(KERN_ERR "Failed to register I2C board info: %d\n", ret);
++	}
++	return ret;
++}
++device_initcall(karo_i2c_init);
++#endif
++#endif
++
++struct platform_dev_list {
++	struct platform_device *pdev;
++	int flag;
++} tx25_devices[] __initdata = {
++#if defined(CONFIG_RTC_MXC) || defined(CONFIG_RTC_MXC_MODULE)
++	{ .pdev = &mxc_rtc_device, .flag = -1, },
++#endif
++#if defined(CONFIG_MTD_NAND_MXC) || defined(CONFIG_MTD_NAND_MXC_MODULE)
++	{ .pdev = &tx25_nand_mtd_device, .flag = 1, },
++#endif
++#if defined(CONFIG_FEC) || defined(CONFIG_FEC_MODULE)
++	{ .pdev = &fec_device, .flag = 1, },
++#endif
++#if defined(CONFIG_SPI_MXC) || defined(CONFIG_SPI_MXC_MODULE)
++	{ .pdev = &mxcspi1_device, .flag = 1, },
++#endif
++#if defined(CONFIG_VIDEO_MXC_EMMA_OUTPUT) || defined(CONFIG_VIDEO_MXC_EMMA_OUTPUT_MODULE)
++	{ .pdev = &tx25_v4l2out_device, .flag = 1, },
++#endif
++#if defined(CONFIG_MXC_VPU) || defined(CONFIG_MXC_VPU_MODULE)
++	{ .pdev = &mxc_vpu_device, .flag = 1, },
++#endif
++};
++#define TX25_NUM_DEVICES		ARRAY_SIZE(tx25_devices)
++
++static __init void karo_tx25_board_init(void)
++{
++	int i;
++
++	DBG(0, "%s: \n", __FUNCTION__);
++
++	dump_regs();
++
++	for (i = 0; i < TX25_NUM_DEVICES; i++) {
++		int ret;
++
++		if (tx25_devices[i].pdev == NULL) continue;
++		if (!tx25_devices[i].flag) {
++			DBG(0, "%s: Skipping platform device[%d] @ %p dev %p: %s\n",
++			    __FUNCTION__, i, tx25_devices[i].pdev, &tx25_devices[i].pdev->dev,
++			    tx25_devices[i].pdev->name);
++			continue;
++		}
++		DBG(0, "%s: Registering platform device[%d] @ %p dev %p: %s\n",
++		    __FUNCTION__, i, tx25_devices[i].pdev, &tx25_devices[i].pdev->dev,
++		    tx25_devices[i].pdev->name);
++		ret = platform_device_register(tx25_devices[i].pdev);
++		if (ret) {
++			printk(KERN_WARNING "%s: Failed to register platform_device[%d]: %s: %d\n",
++			       __FUNCTION__, i, tx25_devices[i].pdev->name, ret);
++		}
++	}
++	DBG(0, "%s: Done\n", __FUNCTION__);
++}
++
++static struct pad_desc karo_tx25_gpios[] __initdata = {
++	MX25_PAD_GPIO_A__GPIO_A,
++	MX25_PAD_GPIO_B__GPIO_B,
++	MX25_PAD_GPIO_C__GPIO_C,
++	MX25_PAD_GPIO_D__GPIO_D,
++	MX25_PAD_GPIO_E__GPIO_E,
++	MX25_PAD_GPIO_F__GPIO_F,
++	MX25_PAD_CSI_D7__GPIO_1_6,
++	MX25_PAD_CSI_D8__GPIO_1_7,
++	MX25_PAD_CSI_MCLK__GPIO_1_8,
++	MX25_PAD_CSI_VSYNC__GPIO_1_9,
++	MX25_PAD_CSI_HSYNC__GPIO_1_10,
++	MX25_PAD_CSI_PIXCLK__GPIO_1_11,
++	MX25_PAD_I2C1_CLK__GPIO_1_12,
++	MX25_PAD_I2C1_DAT__GPIO_1_13,
++	MX25_PAD_CSPI1_MOSI__GPIO_1_14,
++	MX25_PAD_CSPI1_MISO__GPIO_1_15,
++	MX25_PAD_CSPI1_SS0__GPIO_1_16,
++	MX25_PAD_CSPI1_SS1__GPIO_1_17,
++	MX25_PAD_CSPI1_SCLK__GPIO_1_18,
++	MX25_PAD_LD5__GPIO_1_19,
++	MX25_PAD_LD6__GPIO_1_20,
++	MX25_PAD_LD7__GPIO_1_21,
++	MX25_PAD_HSYNC__GPIO_1_22,
++	MX25_PAD_VSYNC__GPIO_1_23,
++	MX25_PAD_LSCLK__GPIO_1_24,
++	MX25_PAD_OE_ACD__GPIO_1_25,
++	MX25_PAD_PWM__GPIO_1_26,
++	MX25_PAD_CSI_D2__GPIO_1_27,
++	MX25_PAD_CSI_D3__GPIO_1_28,
++	MX25_PAD_CSI_D4__GPIO_1_29,
++	MX25_PAD_CSI_D5__GPIO_1_30,
++	MX25_PAD_CSI_D6__GPIO_1_31,
++
++	MX25_PAD_A14__GPIO_2_0,
++	MX25_PAD_A15__GPIO_2_1,
++	MX25_PAD_A16__GPIO_2_2,
++	MX25_PAD_A17__GPIO_2_3,
++	MX25_PAD_A18__GPIO_2_4,
++	MX25_PAD_A19__GPIO_2_5,
++	MX25_PAD_A20__GPIO_2_6,
++	MX25_PAD_A21__GPIO_2_7,
++	MX25_PAD_A22__GPIO_2_8,
++	MX25_PAD_A23__GPIO_2_9,
++	MX25_PAD_A24__GPIO_2_10,
++	MX25_PAD_A25__GPIO_2_11,
++	MX25_PAD_EB0__GPIO_2_12,
++	MX25_PAD_EB1__GPIO_2_13,
++	MX25_PAD_OE__GPIO_2_14,
++	MX25_PAD_LD0__GPIO_2_15,
++	MX25_PAD_LD1__GPIO_2_16,
++	MX25_PAD_LD2__GPIO_2_17,
++	MX25_PAD_LD3__GPIO_2_18,
++	MX25_PAD_LD4__GPIO_2_19,
++	MX25_PAD_DE_B__GPIO_2_20,
++	MX25_PAD_CLKO__GPIO_2_21,
++	MX25_PAD_CSPI1_RDY__GPIO_2_22,
++	MX25_PAD_SD1_CMD__GPIO_2_23,
++	MX25_PAD_SD1_CLK__GPIO_2_24,
++	MX25_PAD_SD1_DATA0__GPIO_2_25,
++	MX25_PAD_SD1_DATA1__GPIO_2_26,
++	MX25_PAD_SD1_DATA2__GPIO_2_27,
++	MX25_PAD_SD1_DATA3__GPIO_2_28,
++	MX25_PAD_KPP_ROW0__GPIO_2_29,
++	MX25_PAD_KPP_ROW1__GPIO_2_30,
++	MX25_PAD_KPP_ROW2__GPIO_2_31,
++
++	MX25_PAD_KPP_ROW3__GPIO_3_0,
++	MX25_PAD_KPP_COL0__GPIO_3_1,
++	MX25_PAD_KPP_COL1__GPIO_3_2,
++	MX25_PAD_KPP_COL2__GPIO_3_3,
++	MX25_PAD_KPP_COL3__GPIO_3_4,
++	MX25_PAD_FEC_MDC__GPIO_3_5,
++	MX25_PAD_FEC_MDIO__GPIO_3_6,
++	MX25_PAD_FEC_TDATA0__GPIO_3_7,
++	MX25_PAD_FEC_TDATA1__GPIO_3_8,
++	MX25_PAD_FEC_TX_EN__GPIO_3_9,
++	MX25_PAD_FEC_RDATA0__GPIO_3_10,
++	MX25_PAD_FEC_RDATA1__GPIO_3_11,
++	MX25_PAD_FEC_RX_DV__GPIO_3_12,
++	MX25_PAD_FEC_TX_CLK__GPIO_3_13,
++	MX25_PAD_RTCK__GPIO_3_14,
++	MX25_PAD_EXT_ARMCLK__GPIO_3_15,
++	MX25_PAD_UPLL_BYPCLK__GPIO_3_16,
++	MX25_PAD_VSTBY_REQ__GPIO_3_17,
++	MX25_PAD_VSTBY_ACK__GPIO_3_18,
++	MX25_PAD_POWER_FAIL__GPIO_3_19,
++	MX25_PAD_CS4__GPIO_3_20,
++	MX25_PAD_CS5__GPIO_3_21,
++	MX25_PAD_NF_CE0__GPIO_3_22,
++	MX25_PAD_ECB__GPIO_3_23,
++	MX25_PAD_LBA__GPIO_3_24,
++	MX25_PAD_RW__GPIO_3_25,
++	MX25_PAD_NFWE_B__GPIO_3_26,
++	MX25_PAD_NFRE_B__GPIO_3_27,
++	MX25_PAD_NFALE__GPIO_3_28,
++	MX25_PAD_NFCLE__GPIO_3_29,
++	MX25_PAD_NFWP_B__GPIO_3_30,
++	MX25_PAD_NFRB__GPIO_3_31,
++
++	MX25_PAD_A10__GPIO_4_0,
++	MX25_PAD_A13__GPIO_4_1,
++	MX25_PAD_CS0__GPIO_4_2,
++	MX25_PAD_CS1__GPIO_4_3,
++	MX25_PAD_BCLK__GPIO_4_4,
++	MX25_PAD_D15__GPIO_4_5,
++	MX25_PAD_D14__GPIO_4_6,
++	MX25_PAD_D13__GPIO_4_7,
++	MX25_PAD_D12__GPIO_4_8,
++	MX25_PAD_D11__GPIO_4_9,
++	MX25_PAD_D10__GPIO_4_10,
++	MX25_PAD_D9__GPIO_4_11,
++	MX25_PAD_D8__GPIO_4_12,
++	MX25_PAD_D7__GPIO_4_13,
++	MX25_PAD_D6__GPIO_4_14,
++	MX25_PAD_D5__GPIO_4_15,
++	MX25_PAD_D4__GPIO_4_16,
++	MX25_PAD_D3__GPIO_4_17,
++	MX25_PAD_D2__GPIO_4_18,
++	MX25_PAD_D1__GPIO_4_19,
++	MX25_PAD_D0__GPIO_4_20,
++	MX25_PAD_CSI_D9__GPIO_4_21,
++	MX25_PAD_UART1_RXD__GPIO_4_22,
++	MX25_PAD_UART1_TXD__GPIO_4_23,
++	MX25_PAD_UART1_RTS__GPIO_4_24,
++	MX25_PAD_UART1_CTS__GPIO_4_25,
++	MX25_PAD_UART2_RXD__GPIO_4_26,
++	MX25_PAD_UART2_TXD__GPIO_4_27,
++	MX25_PAD_UART2_RTS__GPIO_4_28,
++	MX25_PAD_UART2_CTS__GPIO_4_29,
++	MX25_PAD_BOOT_MODE0__GPIO_4_30,
++	MX25_PAD_BOOT_MODE1__GPIO_4_31,
++};
++
++static int __init karo_tx25_setup_gpios(void)
++{
++	int i;
++	int ret;
++	int count = 0;
++
++	for (i = 0; i < ARRAY_SIZE(karo_tx25_gpios); i++) {
++		struct pad_desc *pd = &karo_tx25_gpios[i];
++#if 0
++		if (i - 64 >= 16 && i - 64 < 32) {
++			continue;
++		}
++#endif
++		ret = mxc_iomux_v3_setup_pad(pd);
++		if (ret == 0) {
++#ifdef IOMUX_DEBUG
++			DBG(0, "%s: PAD[%d] %s set up as GPIO\n", __FUNCTION__, i, pd->name);
++#else
++			DBG(0, "%s: PAD[%d] set up as GPIO\n", __FUNCTION__, i);
++#endif
++			count++;
++			mxc_iomux_v3_release_pad(pd);
++		} else {
++#ifdef IOMUX_DEBUG
++			DBG(0, "%s: PAD[%d] %s skipped\n", __FUNCTION__, i, pd->name);
++#else
++			DBG(0, "%s: PAD[%d] skipped\n", __FUNCTION__, i);
++#endif
++		}
++	}
++	DBG(0, "%s: %d out of %d pins set up as GPIO\n", __FUNCTION__, count, i);
++#if 0
++	if (gpio_request(42, "TEST") == 0) {
++		gpio_direction_output(42, 1);
++		while (1) {
++			gpio_set_value(42, 0);
++			if (gpio_get_value(42)) {
++				DBG(0, "%s: GPIO 42 is HIGH instead of LOW\n", __FUNCTION__);
++			}
++			msleep(1000);
++			gpio_set_value(42, 1);
++			if (!gpio_get_value(42)) {
++				DBG(0, "%s: GPIO 42 is LOW instead of HIGH\n", __FUNCTION__);
++			}
++			msleep(1000);
++		}
++	}
++	gpio_free(42);
++#endif
++	return 0;
++}
++late_initcall(karo_tx25_setup_gpios);
++
++static void __init karo_tx25_map_io(void)
++{
++	mx25_map_io();
++}
++
++static void __init karo_tx25_fixup(struct machine_desc *desc, struct tag *tags,
++				   char **cmdline, struct meminfo *mi)
++{
++}
++
++static void __init karo_tx25_timer_init(void)
++{
++	DBG(0, "%s: \n", __FUNCTION__);
++	mx25_clocks_init(24000000);
++	DBG(0, "%s: Done\n", __FUNCTION__);
++}
++
++struct sys_timer karo_tx25_timer = {
++	.init	= karo_tx25_timer_init,
++};
++
++static int __init karo_mod_type_setup(char *line)
++{
++	get_option(&line, &karo_mod_type);
++	DBG(0, "%s: Module type set to 0x%02x by kernel cmd line\n", __FUNCTION__, karo_mod_type);
++
++	return 1;
++}
++__setup("module_type=", karo_mod_type_setup);
++
++static int __init karo_board_type_setup(char *line)
++{
++	get_option(&line, &karo_board_type);
++	DBG(0, "%s: Board type set to 0x%02x by kernel cmd line\n", __FUNCTION__, karo_board_type);
++
++	return 1;
++}
++__setup("board_type=", karo_board_type_setup);
++
++MACHINE_START(TX25, "Ka-Ro electronics TX25 module (Freescale i.MX25)")
++	/* Maintainer: <LW@KARO-electronics.de> */
++	.phys_io        = AIPS1_BASE_ADDR,
++	.io_pg_offst    = ((unsigned long)AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
++	.fixup          = karo_tx25_fixup,
++	.map_io         = karo_tx25_map_io,
++	.init_irq       = mxc_init_irq,
++	.init_machine   = karo_tx25_board_init,
++	.timer          = &karo_tx25_timer,
++MACHINE_END
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/karo.h linux-2.6.30-rc4-karo/arch/arm/mach-mx2/karo.h
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/karo.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/karo.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,99 @@
++/*
++ * arch/arm/mach-mx2/karo.h
++ *
++ * Copyright (C) 2009  Lothar Wassmann <LW@KARO-electronics.de>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the:
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
++ *
++ * This file provides platform specific definitions for the
++ * Ka-Ro electronics TX25 processor modules
++ */
++
++#include <linux/io.h>
++#include "crm_regs_mx25.h"
++
++enum {
++	BOARD_KARO_STK5,
++};
++
++extern int karo_board_type;
++extern int karo_mod_type;
++
++#ifdef DEBUG
++extern int tx25_debug;
++#define dbg_lvl(n)	((n) < tx25_debug)
++#define DBG(lvl, fmt...)	do { if (dbg_lvl(lvl)) printk(KERN_DEBUG fmt); } while (0)
++#else
++#define dbg_lvl(n)	0
++#define DBG(lvl, fmt...)	do { } while (0)
++#endif
++
++static inline int karo_get_board_type(void)
++{
++	return karo_board_type;
++}
++
++static inline int karo_get_module_type(void)
++{
++	return karo_mod_type;
++}
++
++#define SHOW_REG(reg) DBG(0, "%s[%08lx]=%08x\n", #reg, MXC_PHYS_ADDRESS(reg), __raw_readl(reg))
++
++#define SHOW_GPIO_REG(port, reg)					\
++	DBG(0, "GPIO%d_%s[%08lx]=%08x\n", port, #reg,			\
++	    GPIO_BASE_ADDR(port) + GPIO_##reg,				\
++	    __raw_readl(IO_ADDRESS(GPIO_BASE_ADDR(port) + GPIO_##reg)))
++
++static inline void dump_regs(void)
++{
++	int i;
++
++	SHOW_REG(MXC_CCM_MPCTL);
++	SHOW_REG(MXC_CCM_UPCTL);
++	SHOW_REG(MXC_CCM_CCTL);
++	SHOW_REG(MXC_CCM_RCSR);
++	SHOW_REG(MXC_CCM_CRDR);
++	SHOW_REG(MXC_CCM_PCDR0);
++	SHOW_REG(MXC_CCM_PCDR1);
++	SHOW_REG(MXC_CCM_PCDR2);
++	SHOW_REG(MXC_CCM_PCDR3);
++	SHOW_REG(MXC_CCM_CGCR0);
++	SHOW_REG(MXC_CCM_CGCR1);
++	SHOW_REG(MXC_CCM_CGCR2);
++	SHOW_REG(MXC_CCM_MCR);
++	SHOW_REG(MXC_CCM_PMCR0);
++	SHOW_REG(MXC_CCM_PMCR1);
++	SHOW_REG(MXC_CCM_PMCR2);
++	SHOW_REG(MXC_CCM_LTBR0);
++	SHOW_REG(MXC_CCM_LTBR1);
++	SHOW_REG(MXC_CCM_LTR0);
++	SHOW_REG(MXC_CCM_LTR1);
++	SHOW_REG(MXC_CCM_LTR2);
++	SHOW_REG(MXC_CCM_LTR3);
++	SHOW_REG(MXC_CCM_DCVR0);
++	SHOW_REG(MXC_CCM_DCVR1);
++	SHOW_REG(MXC_CCM_DCVR2);
++	SHOW_REG(MXC_CCM_DCVR3);
++
++	for (i = 1; i <= 4; i++) {
++		SHOW_GPIO_REG(i, DR);
++		SHOW_GPIO_REG(i, GDIR);
++		SHOW_GPIO_REG(i, PSR);
++		SHOW_GPIO_REG(i, ICR1);
++		SHOW_GPIO_REG(i, ICR2);
++		SHOW_GPIO_REG(i, IMR);
++		SHOW_GPIO_REG(i, ISR);
++	}
++}
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/sdma_script_code.h linux-2.6.30-rc4-karo/arch/arm/mach-mx2/sdma_script_code.h
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/sdma_script_code.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/sdma_script_code.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,159 @@
++
++/*
++ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
++ */
++
++/*!
++ * @file sdma_script_code.h
++ * @brief This file contains functions of SDMA scripts code initialization
++ *
++ * The file was generated automatically. Based on sdma scripts library.
++ *
++ * @ingroup SDMA
++ */
++/************************************************************************
++
++			SDMA RELEASE LABEL: 	"SS15_SENNA"
++
++************************************************************************/
++
++#ifndef SDMA_SCRIPT_CODE_H
++#define SDMA_SCRIPT_CODE_H
++
++/*!
++ * SDMA ROM scripts start addresses and sizes
++ */
++#define start_ADDR	0
++#define start_SIZE	22
++
++#define core_ADDR	80
++#define core_SIZE	233
++
++#define common_ADDR	313
++#define common_SIZE	416
++
++#define ap_2_ap_ADDR	729
++#define ap_2_ap_SIZE	41
++
++#define app_2_mcu_ADDR	770
++#define app_2_mcu_SIZE	64
++
++#define mcu_2_app_ADDR	834
++#define mcu_2_app_SIZE	70
++
++#define uart_2_mcu_ADDR	904
++#define uart_2_mcu_SIZE	75
++
++#define shp_2_mcu_ADDR	979
++#define shp_2_mcu_SIZE	69
++
++#define mcu_2_shp_ADDR	1048
++#define mcu_2_shp_SIZE	72
++
++#define uartsh_2_mcu_ADDR	1120
++#define uartsh_2_mcu_SIZE	69
++
++#define app_2_per_ADDR	1189
++#define app_2_per_SIZE	66
++
++#define per_2_app_ADDR	1255
++#define per_2_app_SIZE	74
++
++#define per_2_shp_ADDR	1329
++#define per_2_shp_SIZE	78
++
++#define shp_2_per_ADDR	1407
++#define shp_2_per_SIZE	72
++
++#define mcu_2_ata_ADDR	1479
++#define mcu_2_ata_SIZE	81
++
++#define ata_2_mcu_ADDR	1560
++#define ata_2_mcu_SIZE	96
++
++#define loop_DMAs_routines_ADDR	1656
++#define loop_DMAs_routines_SIZE	227
++
++#define test_ADDR	1883
++#define test_SIZE	63
++
++#define signature_ADDR	1022
++#define signature_SIZE	1
++
++/*!
++ * SDMA RAM scripts start addresses and sizes
++ */
++#define ext_mem__ipu_ram_ADDR	6144
++#define ext_mem__ipu_ram_SIZE	123
++
++#define uart_2_per_ADDR	6267
++#define uart_2_per_SIZE	73
++
++#define uartsh_2_per_ADDR	6340
++#define uartsh_2_per_SIZE	67
++
++/*!
++ * SDMA RAM image start address and size
++ */
++#define RAM_CODE_START_ADDR		6144
++#define RAM_CODE_SIZE			263
++
++/*!
++ * Buffer that holds the SDMA RAM image
++ */
++__attribute__ ((__aligned__(4)))
++#ifndef CONFIG_XIP_KERNEL
++const
++#endif
++static const short sdma_code[] = {
++	0x0e70, 0x0611, 0x5616, 0xc18a, 0x7d2a, 0x5ade, 0x008e, 0xc19c,
++	0x7c26, 0x5be0, 0x5ef0, 0x5ce8, 0x0688, 0x08ff, 0x0011, 0x28ff,
++	0x00bc, 0x53f6, 0x05df, 0x7d0b, 0x6dc5, 0x03df, 0x7d03, 0x6bd5,
++	0xd84f, 0x982b, 0x6b05, 0xc6d8, 0x7e27, 0x7f29, 0x982b, 0x6d01,
++	0x03df, 0x7d05, 0x6bd5, 0xc702, 0x7e18, 0x7f1a, 0x982b, 0x6b05,
++	0xc678, 0x7e07, 0x7f06, 0x52de, 0x53e6, 0xc1a8, 0x7dd7, 0x0200,
++	0x9803, 0x0007, 0x6004, 0x680c, 0x53f6, 0x028e, 0x00a3, 0xc2ad,
++	0x048b, 0x0498, 0x0454, 0x068a, 0x982b, 0x0207, 0x680c, 0x6ddf,
++	0x0107, 0x68ff, 0x60d0, 0x9834, 0x0207, 0x68ff, 0x6d28, 0x0107,
++	0x6004, 0x680c, 0x9834, 0x0007, 0x68ff, 0x60d0, 0x9834, 0x0288,
++	0x03a5, 0x3b03, 0x3d03, 0x4d00, 0x7d0a, 0x0804, 0x00a5, 0x00da,
++	0x7d1a, 0x02a0, 0x7b01, 0x65d8, 0x7eee, 0x65ff, 0x7eec, 0x0804,
++	0x02d0, 0x7d11, 0x4b00, 0x7c0f, 0x008a, 0x3003, 0x6dcf, 0x6bdf,
++	0x0015, 0x0015, 0x7b02, 0x65d8, 0x0000, 0x7edd, 0x63ff, 0x7edb,
++	0x3a03, 0x6dcd, 0x6bdd, 0x008a, 0x7b02, 0x65d8, 0x0000, 0x7ed3,
++	0x65ff, 0x7ed1, 0x0006, 0xc23a, 0x57db, 0x52f3, 0x6ad5, 0x56fb,
++	0x028e, 0x1a94, 0x6ac3, 0x62c8, 0x0269, 0x7d1e, 0x1e94, 0x6ee3,
++	0x62d0, 0x5aeb, 0x62c8, 0x0248, 0x6ed3, 0x6ac8, 0x2694, 0x52eb,
++	0x6ad5, 0x6ee3, 0x62c8, 0x026e, 0x7d27, 0x6ac8, 0x7f23, 0x2501,
++	0x4d00, 0x7d26, 0x028e, 0x1a98, 0x6ac3, 0x62c8, 0x6ec3, 0x0260,
++	0x7df1, 0x62d0, 0xc2d1, 0x98c0, 0x6ee3, 0x008f, 0x2001, 0x00d5,
++	0x7d01, 0x008d, 0x05a0, 0x62c8, 0x026e, 0x7d0e, 0x6ac8, 0x7f0a,
++	0x2001, 0x7cf9, 0x6add, 0x7f06, 0x0000, 0x4d00, 0x7d09, 0xc251,
++	0x57db, 0x987f, 0x0007, 0x6aff, 0x62d0, 0xc2d1, 0x0458, 0x0454,
++	0x6add, 0x7ff8, 0xc261, 0x987c, 0xc230, 0xc23a, 0x57db, 0x52f3,
++	0x6ad5, 0x56fb, 0x028e, 0x1a94, 0x5202, 0x0269, 0x7d17, 0x1e94,
++	0x5206, 0x0248, 0x5a06, 0x2694, 0x5206, 0x026e, 0x7d26, 0x6ac8,
++	0x7f22, 0x2501, 0x4d00, 0x7d27, 0x028e, 0x1a98, 0x5202, 0x0260,
++	0x7df3, 0x6add, 0x7f18, 0x62d0, 0xc2d1, 0x9903, 0x008f, 0x2001,
++	0x00d5, 0x7d01, 0x008d, 0x05a0, 0x5206, 0x026e, 0x7d0e, 0x6ac8,
++	0x7f0a, 0x2001, 0x7cf9, 0x6add, 0x7f06, 0x0000, 0x4d00, 0x7d0b,
++	0xc251, 0x57db, 0x98c9, 0x0007, 0x6aff, 0x6add, 0x7ffc, 0x62d0,
++	0xc2d1, 0x0458, 0x0454, 0x6add, 0x7ff6, 0xc261, 0x98c6
++};
++#endif
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx2/stk5-baseboard.c linux-2.6.30-rc4-karo/arch/arm/mach-mx2/stk5-baseboard.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx2/stk5-baseboard.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx2/stk5-baseboard.c	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,1003 @@
++/*
++ * arch/arm/mach-mx2/stk5-baseboard.c
++ *
++ * Copyright (C) 2009  Lothar Wassmann <LW@KARO-electronics.de>
++ *
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the:
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
++ *
++ * This file adds support for devices found on Ka-Ro electronics
++ * Starterkit-5 (STK5) baseboard
++ */
++
++#include <linux/types.h>
++#include <linux/sched.h>
++#include <linux/interrupt.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/platform_device.h>
++#include <linux/input.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/i2c.h>
++#include <linux/i2c/at24.h>
++#include <linux/spi/spi.h>
++//#include <linux/serial_8250.h>
++
++#include <linux/serial.h>
++#include <linux/fsl_devices.h>
++#include <linux/irq.h>
++#include <linux/mmc/host.h>
++#include <linux/gpio_keys.h>
++#include <linux/leds.h>
++
++#include <asm/setup.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/time.h>
++#include <mach/common.h>
++#include <mach/hardware.h>
++#include <mach/gpio.h>
++#include <mach/iomux.h>
++#include <mach/irqs.h>
++#include <mach/clock.h>
++#include <mach/imxfb.h>
++//#include <mach/imx_spi.h>
++#include <mach/i2c.h>
++#include <mach/mmc.h>
++#include <mach/imx-uart.h>
++//#include <mach/ulpi.h>
++//#include <mach/mxc_ehci.h>
++#include <mach/board-stk5.h>
++
++#include "crm_regs.h"
++#include "devices.h"
++#include "karo.h"
++
++#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
++static struct pad_desc stk5_uart_pads[][4] = {
++	{
++		MX25_PAD_UART1_TXD__UART1_TXD,
++		MX25_PAD_UART1_RXD__UART1_RXD,
++		MX25_PAD_UART1_CTS__UART1_CTS,
++		MX25_PAD_UART1_RTS__UART1_RTS,
++	}, {
++		MX25_PAD_UART2_TXD__UART2_TXD,
++		MX25_PAD_UART2_RXD__UART2_RXD,
++		MX25_PAD_UART2_CTS__UART2_CTS,
++		MX25_PAD_UART2_RTS__UART2_RTS,
++	}, {
++		MX25_PAD_ECB__UART5_TXD_MUX,
++		MX25_PAD_LBA__UART5_RXD_MUX,
++		MX25_PAD_CS4__UART5_CTS,
++		MX25_PAD_CS5__UART5_RTS,
++#if 0
++	}, {
++		MX25_PAD_UART4_TXD__UART4_TXD,
++		MX25_PAD_UART4_RXD__UART4_RXD,
++		MX25_PAD_UART4_CTS__UART4_CTS,
++		MX25_PAD_UART4_RTS__UART4_RTS,
++	}, {
++		MX25_PAD_UART5_TXD__UART5_TXD,
++		MX25_PAD_UART5_RXD__UART5_RXD,
++		MX25_PAD_UART5_CTS__UART5_CTS,
++		MX25_PAD_UART5_RTS__UART5_RTS,
++#endif
++	},
++};
++
++static int stk5_uart_init(struct platform_device *pdev)
++{
++	DBG(0, "%s: \n", __FUNCTION__);
++	return mxc_iomux_v3_setup_multiple_pads(stk5_uart_pads[pdev->id],
++						ARRAY_SIZE(stk5_uart_pads[pdev->id]));
++}
++
++static void stk5_uart_exit(struct platform_device *pdev)
++{
++	DBG(0, "%s: \n", __FUNCTION__);
++	mxc_iomux_v3_release_multiple_pads(stk5_uart_pads[pdev->id],
++					   ARRAY_SIZE(stk5_uart_pads[pdev->id]));
++}
++
++static struct imxuart_platform_data stk5_uart_ports[] = {
++	{
++		.init = stk5_uart_init,
++		.exit = stk5_uart_exit,
++		.flags = IMXUART_HAVE_RTSCTS,
++	}, {
++	  	.init = stk5_uart_init,
++	  	.exit = stk5_uart_exit,
++	  	.flags = IMXUART_HAVE_RTSCTS,
++	}, {
++	  	.init = stk5_uart_init,
++	  	.exit = stk5_uart_exit,
++	  	.flags = IMXUART_HAVE_RTSCTS,
++	}, {
++	  	.init = stk5_uart_init,
++	  	.exit = stk5_uart_exit,
++	  	.flags = IMXUART_HAVE_RTSCTS,
++	}, {
++	  	.init = stk5_uart_init,
++	  	.exit = stk5_uart_exit,
++	  	.flags = IMXUART_HAVE_RTSCTS,
++	}, {
++		.init = stk5_uart_init,
++		.exit = stk5_uart_exit,
++		.flags = IMXUART_HAVE_RTSCTS,
++	},
++};
++
++static struct platform_device *stk5_uart_devices[] = {
++#if UART1_ENABLED
++	&mxc_uart_device0,
++#endif
++#if UART2_ENABLED
++	&mxc_uart_device1,
++#endif
++#if UART3_ENABLED
++	&mxc_uart_device2,
++#endif
++#if UART4_ENABLED
++	&mxc_uart_device3,
++#endif
++#if UART5_ENABLED
++	&mxc_uart_device4,
++#endif
++};
++
++static void __init karo_stk5_serial_init(void)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(stk5_uart_devices); i++) {
++		int ret;
++		int port = stk5_uart_devices[i]->id;
++
++		DBG(0, "%s: Registering platform device[%d] @ %p dev %p: %s\n",
++		    __FUNCTION__, i, stk5_uart_devices[i],
++		    &stk5_uart_devices[i]->dev, stk5_uart_devices[i]->name);
++		ret = mxc_register_device(stk5_uart_devices[i],
++					  &stk5_uart_ports[port]);
++		if (ret != 0) {
++			printk(KERN_WARNING "%s: Failed to register platform_device[%d]: %s: %d\n",
++			       __FUNCTION__, i, stk5_uart_devices[i]->name, ret);
++		}
++	}
++}
++#else
++static void __init karo_stk5_serial_init(void)
++{
++}
++#endif
++
++#ifdef CONFIG_USB_EHCI_MXC
++
++#define SMSC_VENDOR_ID		0x0424
++#define USB3317_PROD_ID		0x0006
++#define ULPI_FCTL		7
++
++static inline const char *ulpi_name(void __iomem *view)
++{
++	if ((unsigned long)view & 0x400) {
++		return "USBH2";
++	} else {
++		return "USBOTG";
++	}
++}
++
++static int usb3317_init(void __iomem *view)
++{
++	int vid, pid, ret;
++
++	ret = ulpi_read(ISP1504_VID_HIGH, view);
++	if (ret < 0) {
++		goto err;
++	}
++	vid = ret << 8;
++
++	ret = ulpi_read(ISP1504_VID_LOW, view);
++	if (ret < 0) {
++		goto err;
++	}
++	vid |= ret;
++
++	ret = ulpi_read(ISP1504_PID_HIGH, view);
++	if (ret < 0) {
++		goto err;
++	}
++	pid = ret << 8;
++
++	ret = ulpi_read(ISP1504_PID_LOW, view);
++	if (ret < 0) {
++		goto err;
++	}
++	pid |= ret;
++
++	pr_info("ULPI on %s port Vendor ID 0x%x Product ID 0x%x\n",
++		ulpi_name(view), vid, pid);
++	if (vid != SMSC_VENDOR_ID || pid != USB3317_PROD_ID) {
++		pr_err("No USB3317 found\n");
++		return -ENODEV;
++	}
++ err:
++	if (ret < 0) {
++		printk(KERN_ERR "ULPI read on %s port failed with error %d\n",
++		       ulpi_name(view), ret);
++		return ret;
++	}
++	return 0;
++}
++
++static int usb3317_set_vbus_power(void __iomem *view, int on)
++{
++	int ret;
++
++	DBG(0, "%s: Switching %s port VBUS power %s\n", __FUNCTION__,
++	    ulpi_name(view), on ? "on" : "off");
++
++	if (on) {
++		ret = ulpi_set(DRV_VBUS_EXT |		/* enable external Vbus */
++			       DRV_VBUS |		/* enable internal Vbus */
++			       CHRG_VBUS,		/* charge Vbus */
++			       ISP1504_OTGCTL, view);
++	} else {
++		ret = ulpi_clear(DRV_VBUS_EXT |		/* disable external Vbus */
++				 DRV_VBUS,		/* disable internal Vbus */
++				 ISP1504_OTGCTL, view);
++		if (ret == 0) {
++			ret = ulpi_set(DISCHRG_VBUS,	   /* discharge Vbus */
++				       ISP1504_OTGCTL, view);
++		}
++	}
++	if (ret < 0) {
++		printk(KERN_ERR "ULPI read on %s port failed with error %d\n",
++		       ulpi_name(view), ret);
++		return ret;
++	}
++	return 0;
++}
++
++static int stk5_usbh2_init(struct platform_device *pdev)
++{
++	int ret;
++	u32 temp;
++	unsigned long flags;
++	void __iomem *view = IO_ADDRESS(OTG_BASE_ADDR + 0x570);
++
++	local_irq_save(flags);
++	temp = readl(IO_ADDRESS(OTG_BASE_ADDR) + 0x600);
++	temp &= ~((3 << 21) | (1 << 0));
++	temp |= (1 << 5) | (1 << 16) | (1 << 19) | (1 << 20);
++	writel(temp, IO_ADDRESS(OTG_BASE_ADDR) + 0x600);
++	local_irq_restore(flags);
++
++	/* select ULPI transceiver */
++	/* this must be done _before_ setting up the GPIOs! */
++	temp = readl(view + 0x14);
++	DBG(0, "%s: Changing USBH2_PORTSC1 from %08x to %08x\n", __FUNCTION__,
++	    temp, (temp & ~(3 << 30)) | (2 << 30));
++	temp &= ~(3 << 30);
++	temp |= 2 << 30;
++	writel(temp, view + 0x14);
++
++	/* Set to Host mode */
++	temp = readl(view + 0x38);
++	DBG(0, "%s: Changing USBH2_USBMODE from %08x to %08x\n", __FUNCTION__,
++	    temp, temp | 3);
++	writel(temp | 0x3, view + 0x38);
++
++	ret = gpio_usbh2_active();
++	if (ret != 0) {
++		return ret;
++	}
++
++	ret = usb3317_init(view);
++	if (ret != 0) {
++		goto err;
++	}
++	ret = usb3317_set_vbus_power(view, 1);
++	if (ret != 0) {
++		goto err;
++	}
++	return 0;
++
++ err:
++	gpio_usbh2_inactive();
++	return ret;
++}
++
++static int stk5_usbh2_exit(struct platform_device *pdev)
++{
++	gpio_usbh2_inactive();
++	return 0;
++}
++
++static struct mxc_usbh_platform_data stk5_usbh2_data = {
++	.init = stk5_usbh2_init,
++	.exit = stk5_usbh2_exit,
++};
++
++static int __init karo_stk5_usbh2_register(void)
++{
++	int ret;
++
++	ret = mxc_register_device(&mxc_ehci2, &stk5_usbh2_data);
++	return ret;
++}
++#else
++static inline int karo_stk5_usbh2_register(void)
++{
++	return 0;
++}
++#endif // CONFIG_USB_EHCI_MXC
++
++#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
++static struct gpio_led stk5_leds[] = {
++	{
++		.name = "GPIO-LED",
++		.default_trigger = "heartbeat",
++		.gpio = GPIO_PORTB | 7,
++	},
++};
++
++static struct gpio_led_platform_data stk5_led_data = {
++	.leds = stk5_leds,
++	.num_leds = ARRAY_SIZE(stk5_leds),
++};
++
++static struct platform_device stk5_led_device = {
++	.name = "leds-gpio",
++	.id = -1,
++	.dev = {
++		.platform_data = &stk5_led_data,
++	},
++};
++#endif
++
++#if defined(CONFIG_KEYBOARD_MXC) || defined(CONFIG_KEYBOARD_MXC_MODULE)
++/*!
++ * This array is used for mapping mx25 ADS keypad scancodes to input keyboard
++ * keycodes.
++ */
++static u16 stk5_kpd_keycodes[] = {
++	KEY_POWER,
++};
++
++static struct keypad_data stk5_keypad = {
++	.rowmax = 1,
++	.colmax = 1,
++	.irq = MXC_INT_KPP,
++	.learning = 0,
++	//.delay = 2, /* unused in the driver! */
++	.matrix = stk5_kpd_keycodes,
++};
++
++static struct resource stk5_kpp_resources[] = {
++	{
++		.start = MXC_INT_KPP,
++		.end = MXC_INT_KPP,
++		.flags = IORESOURCE_IRQ,
++	},
++};
++
++/* stk5 keypad driver */
++static struct platform_device stk5_keypad_device = {
++	.name = "mxc_keypad",
++	.id = 0,
++	.num_resources = ARRAY_SIZE(stk5_kpp_resources),
++	.resource = stk5_kpp_resources,
++	.dev = {
++		.platform_data = &stk5_keypad,
++	},
++};
++#endif
++
++#if defined(CONFIG_FB_IMX) || defined(CONFIG_FB_IMX_MODULE)
++/*
++ * Setup GPIO for LCDC device to be active
++ *
++ */
++static struct pad_desc mx25_lcdc_gpios[] = {
++#if 0
++	MXC_PIN(A, 30, GPIO, GPIO_OUT | GPIO_DFLT_LOW),	/* PA30 */
++	MXC_PIN(A, 25, GPIO, GPIO_OUT | GPIO_DFLT_LOW),	/* PA25 */
++	MXC_PIN(A, 26, GPIO, GPIO_OUT | GPIO_DFLT_LOW),	/* PA26 */
++	MXC_PIN(A, 24, GPIO, GPIO_OUT | GPIO_DFLT_LOW),	/* PA24 */
++	MXC_PIN(A, 27, GPIO, GPIO_OUT | GPIO_DFLT_LOW),	/* PA27 */
++#endif
++	MX25_PAD_LSCLK__LSCLK,
++	MX25_PAD_LD0__LD0,
++	MX25_PAD_LD1__LD1,
++	MX25_PAD_LD2__LD2,
++	MX25_PAD_LD3__LD3,
++	MX25_PAD_LD4__LD4,
++	MX25_PAD_LD5__LD5,
++	MX25_PAD_LD6__LD6,
++	MX25_PAD_LD7__LD7,
++	MX25_PAD_LD8__LD8,
++	MX25_PAD_LD9__LD9,
++	MX25_PAD_LD10__LD10,
++	MX25_PAD_LD11__LD11,
++	MX25_PAD_LD12__LD12,
++	MX25_PAD_LD13__LD13,
++	MX25_PAD_LD14__LD14,
++	MX25_PAD_LD15__LD15,
++	MX25_PAD_D15__LD16,
++	MX25_PAD_D14__LD17,
++	MX25_PAD_HSYNC__HSYNC,
++	MX25_PAD_VSYNC__VSYNC,
++	MX25_PAD_OE_ACD__OE_ACD,
++};
++
++static int stk5_gpio_lcdc_active(struct platform_device *dev)
++{
++	int ret;
++
++	DBG(0, "%s: Setting up GPIO pins for LCD\n", __FUNCTION__);
++	ret = mxc_iomux_v3_setup_multiple_pads(mx25_lcdc_gpios,
++					       ARRAY_SIZE(mx25_lcdc_gpios));
++	if (ret) {
++		DBG(0, "%s: Failed to setup GPIO pins for LCD: %d\n",
++		    __FUNCTION__, ret);
++		return ret;
++	}
++	return 0;
++}
++
++/*
++ * Setup GPIO for LCDC device to be inactive
++ *
++ */
++static void stk5_gpio_lcdc_inactive(struct platform_device *dev)
++{
++	mxc_iomux_v3_release_multiple_pads(mx25_lcdc_gpios,
++					   ARRAY_SIZE(mx25_lcdc_gpios));
++}
++
++static struct imx_fb_platform_data stk5_fb_data[] __initdata = {
++	{
++		//.fb_mode = "Xenarc_700_Y-18",
++		.init = stk5_gpio_lcdc_active,
++		.exit = stk5_gpio_lcdc_inactive,
++		.lcd_power = NULL,
++		.backlight_power = NULL,
++
++		.pixclock	= 34576,
++		.xres		= 640,
++		.yres		= 480,
++
++		.bpp		= 32,
++
++		.hsync_len	= 64,
++		.right_margin	= 60 + 1,
++		.left_margin	= 80 + 3,
++
++		.vsync_len	= 2,
++		.upper_margin	= 54,
++		.lower_margin	= 54,
++#if 0
++		/* currently not used by driver! */
++		.sync		= ((0*FB_SYNC_HOR_HIGH_ACT) |
++				   (0*FB_SYNC_VERT_HIGH_ACT) |
++				   (1*FB_SYNC_OE_ACT_HIGH)),
++#else
++		.pcr		= PCR_TFT | PCR_COLOR | PCR_PBSIZ_8 |
++		PCR_BPIX_18 | PCR_END_SEL | PCR_FLMPOL | PCR_LPPOL | PCR_SCLK_SEL,
++		.dmacr		= 0x800a0078,
++#endif
++		.cmap_greyscale	= 0,
++		.cmap_inverse	= 0,
++		.cmap_static	= 0,
++
++		.fixed_screen_cpu = NULL,
++	}, {
++		//.fb_mode = "Xenarc_700_Y-16",
++		.init = stk5_gpio_lcdc_active,
++		.exit = stk5_gpio_lcdc_inactive,
++		.lcd_power = NULL,
++		.backlight_power = NULL,
++
++		.pixclock	= 34576,
++		.xres		= 640,
++		.yres		= 480,
++
++		.bpp		= 16,
++
++		.hsync_len	= 64,
++		.right_margin	= 138 + 1,
++		.left_margin	= 118 + 3,
++
++		.vsync_len	= 7,
++		.upper_margin	= 44,
++		.lower_margin	= 44,
++#if 0
++		/* currently not used by driver! */
++		.sync		= ((0*FB_SYNC_HOR_HIGH_ACT) |
++				   (0*FB_SYNC_VERT_HIGH_ACT) |
++				   (1*FB_SYNC_OE_ACT_HIGH)),
++#else
++		.pcr		= PCR_TFT | PCR_COLOR | PCR_PBSIZ_8 |
++		PCR_BPIX_16 | PCR_FLMPOL | PCR_LPPOL | PCR_SCLK_SEL,
++		.dmacr		= 0x80040060,
++#endif
++		.cmap_greyscale	= 0,
++		.cmap_inverse	= 0,
++		.cmap_static	= 0,
++
++		.fixed_screen_cpu = NULL,
++	}, {
++		//.fb_mode = "SHARP LQ10D42-16",
++		.init = stk5_gpio_lcdc_active,
++		.exit = stk5_gpio_lcdc_inactive,
++		.lcd_power = NULL,
++		.backlight_power = NULL,
++
++		.pixclock	= 34576,
++		.xres		= 640,
++		.yres		= 480,
++
++#ifdef USE_18BPP
++		.bpp		= 32,
++#else
++		.bpp		= 16,
++#endif
++		.hsync_len	= 64,
++		.right_margin	= 138 + 1,
++		.left_margin	= 118 + 3,
++
++		.vsync_len	= 7,
++		.upper_margin	= 28,
++		.lower_margin	= 60,
++#if 0
++		/* currently not used by driver! */
++		.sync		= ((0*FB_SYNC_HOR_HIGH_ACT) |
++				   (0*FB_SYNC_VERT_HIGH_ACT) |
++				   (1*FB_SYNC_OE_ACT_HIGH)),
++#else
++		.pcr		= PCR_TFT | PCR_COLOR | PCR_PBSIZ_8 |
++#ifdef USE_18BPP
++		PCR_BPIX_18 | PCR_END_SEL | PCR_FLMPOL | PCR_LPPOL | PCR_SCLK_SEL,
++#else
++		PCR_BPIX_16 | PCR_FLMPOL | PCR_LPPOL | PCR_SCLK_SEL,
++#endif
++		.dmacr		= 0x80040060,
++#endif
++		.cmap_greyscale	= 0,
++		.cmap_inverse	= 0,
++		.cmap_static	= 0,
++
++		.fixed_screen_cpu = NULL,
++	}, {
++		//.fb_mode = "SHARP LQ104V1DG61-16",
++		.init = stk5_gpio_lcdc_active,
++		.exit = stk5_gpio_lcdc_inactive,
++		.lcd_power = NULL,
++		.backlight_power = NULL,
++
++		.pixclock	= 40000,
++		.xres		= 640,
++		.yres		= 480,
++
++#ifdef USE_18BPP
++		.bpp		= 32,
++#else
++		.bpp		= 16,
++#endif
++		.hsync_len	= 32,
++		.right_margin	= 32 + 1,
++		.left_margin	= 0 + 3,
++
++		.vsync_len	= 35,
++		.upper_margin	= 0,
++		.lower_margin	= 0,
++#if 0
++		/* currently not used by driver! */
++		.sync		= ((0*FB_SYNC_HOR_HIGH_ACT) |
++				   (0*FB_SYNC_VERT_HIGH_ACT) |
++				   (1*FB_SYNC_OE_ACT_HIGH)),
++#else
++		.pcr		= PCR_TFT | PCR_COLOR | PCR_PBSIZ_8 |
++#ifdef USE_18BPP
++		PCR_BPIX_18 | PCR_END_SEL | PCR_FLMPOL | PCR_LPPOL | PCR_SCLK_SEL,
++#else
++		PCR_BPIX_16 | PCR_FLMPOL | PCR_LPPOL | PCR_CLKPOL | PCR_SCLK_SEL,
++#endif
++		.dmacr		= 0x80040060,
++#endif
++		.cmap_greyscale	= 0,
++		.cmap_inverse	= 0,
++		.cmap_static	= 0,
++
++		.fixed_screen_cpu = NULL,
++	},
++};
++
++static int __init karo_stk5_fb_register(void)
++{
++	int ret;
++
++	ret = mxc_register_device(&mxc_fb_device, &stk5_fb_data[0]);
++	if (ret != 0) {
++		DBG(0, "%s: Failed to register FB device: %d\n", __FUNCTION__, ret);
++	}
++	return ret;
++}
++#else
++static inline int karo_stk5_fb_register(void)
++{
++	return 0;
++}
++#endif
++
++#if defined(CONFIG_MMC_MXC) || defined(CONFIG_MMC_MXC_MODULE)
++/*!
++ * Resource definition for the SDHC1
++ */
++static struct resource stk5_sdhc1_resources[] = {
++	{
++		.start = MMC_SDHC1_BASE_ADDR,
++		.end = MMC_SDHC1_BASE_ADDR + SZ_4K - 1,
++		.flags = IORESOURCE_MEM,
++	}, {
++		.start = MXC_INT_SDHC1,
++		.end = MXC_INT_SDHC1,
++		.flags = IORESOURCE_IRQ,
++	}, {
++		.start = gpio_to_irq(4 * 32 + 4),
++		.end = gpio_to_irq(4 * 32 + 4),
++		.flags = IORESOURCE_IRQ,
++#if 0
++	}, {
++		.name   = "sdhc1",
++		.start  = DMA_REQ_SDHC1,
++		.end    = DMA_REQ_SDHC1,
++		.flags  = IORESOURCE_DMA
++#endif
++	},
++};
++
++static inline int stk5_mmc_get_irq(int id)
++{
++	int irq;
++
++	switch (id) {
++	case 0:
++		irq = stk5_sdhc1_resources[2].start;
++		break;
++	default:
++		BUG();
++	}
++	return irq;
++}
++
++static const char *stk5_mmc_irqdesc[] = {
++	"MMC card 0 detect",
++};
++
++static struct pad_desc stk5_sdhc_pads[] = {
++};
++
++static int stk5_mmc_init(struct device *dev, irqreturn_t (*mmc_detect_irq)(int, void *),
++			 void *data)
++{
++	int err;
++	int id = to_platform_device(dev)->id;
++	struct mmc_host *host = data;
++	int irq = stk5_mmc_get_irq(id);
++
++	err = mxc_iomux_v3_setup_multiple_pads(stk5_sdhc_pads,
++					       ARRAY_SIZE(stk5_sdhc_pads));
++	if (err) {
++		return err;
++	}
++
++	host->caps |= MMC_CAP_4_BIT_DATA;
++
++	err = request_irq(irq, mmc_detect_irq,
++			  IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
++			  stk5_mmc_irqdesc[id], data);
++	if (err) {
++		printk(KERN_ERR "%s: MMC/SD: can't request MMC card detect IRQ %d\n",
++		       __FUNCTION__, irq);
++		return err;
++	}
++	device_set_wakeup_capable(dev, 1);
++
++	return 0;
++}
++
++static void stk5_mmc_exit(struct device *dev, void *data)
++{
++	int id = to_platform_device(dev)->id;
++	int irq = stk5_mmc_get_irq(id);
++
++	free_irq(irq, data);
++	mxc_iomux_v3_release_multiple_pads(stk5_sdhc_pads,
++					   ARRAY_SIZE(stk5_sdhc_pads));
++}
++
++#if 0
++static int stk5_mmc_suspend(struct device *dev, pm_message_t state)
++{
++	int id = to_platform_device(dev)->id;
++	int irq = stk5_mmc_get_irq(id);
++
++	if (device_may_wakeup(dev)) {
++		DBG(0, "%s: Enabling IRQ %d wakeup\n", __FUNCTION__, irq);
++		return enable_irq_wake(irq);
++	}
++	return 0;
++}
++
++static int stk5_mmc_resume(struct device *dev)
++{
++	int id = to_platform_device(dev)->id;
++	int irq = stk5_mmc_get_irq(id);
++
++	if (device_may_wakeup(dev)) {
++		DBG(0, "%s: Disabling IRQ %d wakeup\n", __FUNCTION__, irq);
++		return disable_irq_wake(irq);
++	}
++	return 0;
++}
++#endif
++
++static struct imxmmc_platform_data stk5_sdhc1_data = {
++	//.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
++	//.min_clk = 150000,
++	//.max_clk = 25000000,
++	//.detect_delay = 20,
++	.init = stk5_mmc_init,
++	.exit = stk5_mmc_exit,
++//	.suspend = stk5_mmc_suspend,
++//	.resume = stk5_mmc_resume,
++};
++
++static struct platform_device stk5_sdhc1_device = {
++	.name = "imx-mmc",
++	.id = 0,
++	.dev = {
++		.platform_data = &stk5_sdhc1_data,
++	},
++	.num_resources = ARRAY_SIZE(stk5_sdhc1_resources),
++	.resource = stk5_sdhc1_resources,
++};
++#endif
++
++#if defined(CONFIG_SPI_MXC) || defined(CONFIG_SPI_MXC_MODULE)
++static struct resource mxcspi1_resources[] = {
++	{
++	       .start = CSPI1_BASE_ADDR,
++	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
++	       .flags = IORESOURCE_MEM,
++	}, {
++	       .start = MXC_INT_CSPI1,
++	       .end = MXC_INT_CSPI1,
++	       .flags = IORESOURCE_IRQ,
++	},
++};
++
++static struct mxc_spi_master mxcspi1_data = {
++	.maxchipselect = 2,
++	.spi_version = 0,
++};
++
++static struct platform_device mxcspi1_device = {
++	.name = "mxc_spi",
++	.id = 0,
++	.dev = {
++		.platform_data = &mxcspi1_data,
++	},
++	.num_resources = ARRAY_SIZE(mxcspi1_resources),
++	.resource = mxcspi1_resources,
++};
++#endif // defined(CONFIG_SPI_MXC) || defined(CONFIG_SPI_MXC_MODULE)
++
++#if defined(CONFIG_AC97_BUS) || defined(CONFIG_AC97_BUS_MODULE)
++static u64 stk5_dma_mask = ~0UL;
++
++static struct pad_desc stk5_ac97_pads_on[] = {
++	MX25_PAD_VSTBY_ACK__GPIO_3_18, /* UCB1400 Reset */
++	MX25_PAD_RW__AUD4_TXFS,
++	MX25_PAD_EB0__AUD4_TXD,
++	MX25_PAD_EB1__AUD4_RXD,
++	MX25_PAD_OE__AUD4_TXC,
++};
++
++static struct pad_desc stk5_ac97_pads_off[] = {
++	MX25_PAD_VSTBY_ACK__GPIO_3_18, /* UCB1400 Reset */
++	MX25_PAD_RW__GPIO_3_25,
++	MX25_PAD_EB0__GPIO_2_12,
++	MX25_PAD_EB1__AUD4_RXD,
++	MX25_PAD_OE__AUD4_TXC,
++};
++
++static struct gpio_desc {
++	unsigned int gpio:7;
++	unsigned int dir:1;
++	unsigned int level:1;
++} stk5_ac97_gpios[] = {
++	/* configure the PHY strap pins to the correct values */
++	{ GPIO_PORTC | 18, 1, 0, },
++	{ GPIO_PORTC | 25, 1, 0, },
++	{ GPIO_PORTB | 12, 1, 0, },
++};
++
++static int stk5_ac97_init(struct platform_device *dev)
++{
++	int ret;
++	int i;
++
++	DBG(0, "%s: \n", __FUNCTION__);
++
++	ret = mxc_iomux_v3_setup_multiple_pads(stk5_ac97_pads_off,
++					       ARRAY_SIZE(stk5_ac97_pads_off));
++	if (ret == 0) {
++		for (i = 0; i < ARRAY_SIZE(stk5_ac97_gpios); i++) {
++			struct gpio_desc *pd = &stk5_ac97_gpios[i];
++
++			ret = gpio_request(pd->gpio, "AC97");
++			if (ret < 0) {
++				DBG(0, "%s: Failed to request GPIO%d_%d: %d\n",
++				    __FUNCTION__, pd->gpio / 32 + 1, pd->gpio % 32, ret);
++				goto rel_mux;
++			}
++			if (pd->dir) {
++				gpio_direction_output(pd->gpio,
++						      pd->level);
++			} else {
++				gpio_direction_input(pd->gpio);
++			}
++		}
++
++		ret = mxc_iomux_v3_setup_multiple_pads(stk5_ac97_pads_on,
++						       ARRAY_SIZE(stk5_ac97_pads_on));
++		if (ret != 0) {
++			goto rel_gpio;
++		}
++		udelay(1);
++		gpio_set_value(stk5_ac97_gpios[0].gpio, !stk5_ac97_gpios[0].level);
++	}
++	return ret;
++
++ rel_mux:
++	mxc_iomux_v3_release_multiple_pads(stk5_ac97_gpios_off,
++					   ARRAY_SIZE(stk5_ac97_gpios_off));
++ rel_gpio:
++	while (--i >= 0) {
++		struct gpio_desc *pd = &stk5_ac97_gpios[i];
++		int grp = pd->gpio / 32 + 1;
++		int ofs = pd->gpio % 32;
++
++		DBG(0, "%s: Freeing GPIO%d_%d\n", __FUNCTION__,
++		    grp, ofs);
++		gpio_free(pd->gpio);
++	}
++	return ret;
++}
++
++static void stk5_ac97_exit(struct platform_device *dev)
++{
++	int i;
++
++	DBG(0, "%s: Releasing AC97 GPIO pins\n", __FUNCTION__);
++
++	mxc_iomux_v3_release_multiple_pads(stk5_ac97_pads_on,
++					   ARRAY_SIZE(stk5_ac97_pads_on));
++	for (i = 0; i < ARRAY_SIZE(stk5_ac97_gpios); i++) {
++		struct gpio_desc *pd = &stk5_ac97_gpios[i];
++		int grp = pd->gpio / 32 + 1;
++		int ofs = pd->gpio % 32;
++
++		DBG(0, "%s: Freeing GPIO%d_%d\n", __FUNCTION__,
++		    grp, ofs);
++		gpio_free(pd->gpio);
++	}
++}
++
++static struct mxc_ac97_audio_ops stk5_ac97_ops = {
++	.init = stk5_ac97_init,
++	.exit = stk5_ac97_exit,
++	.startup = NULL,
++	.shutdown = NULL,
++	.suspend = NULL,
++	.resume = NULL,
++	.priv = NULL,
++};
++
++static struct platform_device ac97_device = {
++	.name		= "mx25-ac97",
++	.id		= -1,
++	.dev = {
++		.dma_mask = &stk5_dma_mask,
++		.coherent_dma_mask = ~0UL,
++		.platform_data = &stk5_ac97_ops,
++	},
++};
++#endif
++
++static struct platform_dev_list {
++	struct platform_device *pdev;
++	int flag;
++} stk5_devices[] __initdata = {
++#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
++	{ .pdev = &stk5_led_device, .flag = -1, },
++#endif
++#if defined(CONFIG_KEYBOARD_MXC) || defined(CONFIG_KEYBOARD_MXC_MODULE)
++	{ .pdev = &stk5_keypad_device, .flag = 1, },
++#endif
++#if defined(CONFIG_SPI_MXC) || defined(CONFIG_SPI_MXC_MODULE)
++	{ .pdev = &mxcspi1_device, .flag = 1, },
++#endif
++#if defined(CONFIG_AC97_BUS) || defined(CONFIG_AC97_BUS_MODULE)
++	{ .pdev = &ac97_device, .flag = 1, },
++#endif
++#if defined(CONFIG_MMC_MXC) || defined(CONFIG_MMC_MXC_MODULE)
++	{ .pdev = &stk5_sdhc1_device, .flag = 1, },
++#endif
++};
++#define STK5_NUM_DEVICES		ARRAY_SIZE(stk5_devices)
++
++static __init int karo_stk5_board_init(void)
++{
++	int ret;
++	int i;
++
++	if (karo_get_board_type() != BOARD_KARO_STK5) {
++		return -ENODEV;
++	}
++	DBG(0, "%s: \n", __FUNCTION__);
++
++	karo_stk5_serial_init();
++
++	dump_regs();
++
++	/* enable SSI1_INT (GPIO_3_15) for IRQ probing */
++	set_irq_flags(gpio_to_irq(GPIO_PORTC | 15), IRQF_VALID | IRQF_PROBE);
++
++	ret = karo_stk5_fb_register();
++	if (ret) {
++		printk(KERN_WARNING "%s: karo_stk5_fb_register() failed: %d\n",
++		       __FUNCTION__, ret);
++	}
++	ret = karo_stk5_usbh2_register();
++	if (ret) {
++		printk(KERN_WARNING "%s: karo_stk5_usbh2_register() failed: %d\n",
++		       __FUNCTION__, ret);
++	}
++
++	for (i = 0; i < STK5_NUM_DEVICES; i++) {
++		if (stk5_devices[i].pdev == NULL) continue;
++		if (!stk5_devices[i].flag) {
++			DBG(0, "%s: Skipping platform device[%d] @ %p dev %p: %s\n",
++			    __FUNCTION__, i, stk5_devices[i].pdev, &stk5_devices[i].pdev->dev,
++			    stk5_devices[i].pdev->name);
++			continue;
++		}
++		DBG(0, "%s: Registering platform device[%d] @ %p dev %p: %s\n",
++		    __FUNCTION__, i, stk5_devices[i].pdev, &stk5_devices[i].pdev->dev,
++		    stk5_devices[i].pdev->name);
++		ret = platform_device_register(stk5_devices[i].pdev);
++		if (ret) {
++			printk(KERN_WARNING "%s: Failed to register platform_device[%d]: %s: %d\n",
++			       __FUNCTION__, i, stk5_devices[i].pdev->name, ret);
++		}
++	}
++	DBG(0, "%s: Done\n", __FUNCTION__);
++	return 0;
++}
++subsys_initcall(karo_stk5_board_init);
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx3/clock-imx35.c linux-2.6.30-rc4-karo/arch/arm/mach-mx3/clock-imx35.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx3/clock-imx35.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx3/clock-imx35.c	2009-06-02 17:05:26.000000000 +0200
+@@ -381,7 +381,7 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4
+ 		.clk = &c,		\
+ 	},
+ 
+-static struct clk_lookup lookups[] __initdata = {
++static struct clk_lookup lookups[] = {
+ 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
+ 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+ 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
+diff -urNp linux-2.6.30-rc4/arch/arm/mach-mx3/clock.c linux-2.6.30-rc4-karo/arch/arm/mach-mx3/clock.c
+--- linux-2.6.30-rc4/arch/arm/mach-mx3/clock.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/mach-mx3/clock.c	2009-06-02 17:05:26.000000000 +0200
+@@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,      
+ 		.clk = &c, \
+ 	},
+ 
+-static struct clk_lookup lookups[] __initdata = {
++static struct clk_lookup lookups[] = {
+ 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
+ 	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
+ 	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/Kconfig linux-2.6.30-rc4-karo/arch/arm/plat-mxc/Kconfig
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/Kconfig	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/Kconfig	2009-06-02 17:05:27.000000000 +0200
+@@ -56,6 +56,9 @@ config ARCH_HAS_RNGA
+ 	bool
+ 	depends on ARCH_MXC
+ 
++config ARCH_MXC_IOMUX_V2
++	bool
++
+ config ARCH_MXC_IOMUX_V3
+ 	bool
+ endif
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/Makefile linux-2.6.30-rc4-karo/arch/arm/plat-mxc/Makefile
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/Makefile	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/Makefile	2009-06-02 17:05:27.000000000 +0200
+@@ -5,7 +5,7 @@
+ # Common support
+ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
+ 
+-obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
+-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+-obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
+-obj-$(CONFIG_MXC_PWM)  += pwm.o
++obj-$(CONFIG_ARCH_MXC_IOMUX_V2)	+= iomux-mx1-mx2.o dma-mx1-mx2.o
++obj-$(CONFIG_ARCH_MXC_IOMUX_V3)	+= iomux-v3.o
++obj-$(CONFIG_MXC_PWM)		+= pwm.o
++obj-$(CONFIG_MACH_MX25)		+= spba.o
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-stk5.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/board-stk5.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-stk5.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/board-stk5.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,17 @@
++/*
++ * Copyright 2009 <LW@KARO-electronics.de>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#define UART1_ENABLED		1
++#define UART2_ENABLED		1
++#define UART3_ENABLED		1
++/* Not available on TX25 */
++#define UART4_ENABLED		0
++#define UART5_ENABLED		0
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-tx25.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/board-tx25.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/board-tx25.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/board-tx25.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,13 @@
++/*
++ * Copyright 2009 <LW@KARO-electronics.de>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
++#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/common.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/common.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/common.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/common.h	2009-06-02 17:05:27.000000000 +0200
+@@ -17,6 +17,7 @@ struct clk;
+ extern void mx1_map_io(void);
+ extern void mx21_map_io(void);
+ extern void mx27_map_io(void);
++extern void mx25_map_io(void);
+ extern void mx31_map_io(void);
+ extern void mx35_map_io(void);
+ extern void mxc_init_irq(void);
+@@ -24,6 +25,7 @@ extern void mxc_timer_init(struct clk *t
+ extern int mx1_clocks_init(unsigned long fref);
+ extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+ extern int mx27_clocks_init(unsigned long fref);
++extern int mx25_clocks_init(unsigned long fref);
+ extern int mx31_clocks_init(unsigned long fref);
+ extern int mx35_clocks_init(void);
+ extern int mxc_register_gpios(void);
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/dma.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/dma.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/dma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/dma.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,259 @@
++/*
++ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARCH_MXC_DMA_H__
++#define __ASM_ARCH_MXC_DMA_H__
++
++#include <mach/sdma.h>
++
++#define MXC_DMA_DYNAMIC_CHANNEL   255
++
++#define MXC_DMA_DONE		  0x0
++#define MXC_DMA_REQUEST_TIMEOUT   0x1
++#define MXC_DMA_TRANSFER_ERROR    0x2
++
++/*! This defines the list of device ID's for DMA */
++typedef enum mxc_dma_device {
++	MXC_DMA_UART1_RX,
++	MXC_DMA_UART1_TX,
++	MXC_DMA_UART2_RX,
++	MXC_DMA_UART2_TX,
++	MXC_DMA_UART3_RX,
++	MXC_DMA_UART3_TX,
++	MXC_DMA_UART4_RX,
++	MXC_DMA_UART4_TX,
++	MXC_DMA_UART5_RX,
++	MXC_DMA_UART5_TX,
++	MXC_DMA_UART6_RX,
++	MXC_DMA_UART6_TX,
++	MXC_DMA_MMC1_WIDTH_1,
++	MXC_DMA_MMC1_WIDTH_4,
++	MXC_DMA_MMC2_WIDTH_1,
++	MXC_DMA_MMC2_WIDTH_4,
++	MXC_DMA_SSI1_8BIT_RX0,
++	MXC_DMA_SSI1_8BIT_TX0,
++	MXC_DMA_SSI1_16BIT_RX0,
++	MXC_DMA_SSI1_16BIT_TX0,
++	MXC_DMA_SSI1_24BIT_RX0,
++	MXC_DMA_SSI1_24BIT_TX0,
++	MXC_DMA_SSI1_8BIT_RX1,
++	MXC_DMA_SSI1_8BIT_TX1,
++	MXC_DMA_SSI1_16BIT_RX1,
++	MXC_DMA_SSI1_16BIT_TX1,
++	MXC_DMA_SSI1_24BIT_RX1,
++	MXC_DMA_SSI1_24BIT_TX1,
++	MXC_DMA_SSI2_8BIT_RX0,
++	MXC_DMA_SSI2_8BIT_TX0,
++	MXC_DMA_SSI2_16BIT_RX0,
++	MXC_DMA_SSI2_16BIT_TX0,
++	MXC_DMA_SSI2_24BIT_RX0,
++	MXC_DMA_SSI2_24BIT_TX0,
++	MXC_DMA_SSI2_8BIT_RX1,
++	MXC_DMA_SSI2_8BIT_TX1,
++	MXC_DMA_SSI2_16BIT_RX1,
++	MXC_DMA_SSI2_16BIT_TX1,
++	MXC_DMA_SSI2_24BIT_RX1,
++	MXC_DMA_SSI2_24BIT_TX1,
++	MXC_DMA_FIR_RX,
++	MXC_DMA_FIR_TX,
++	MXC_DMA_CSPI1_RX,
++	MXC_DMA_CSPI1_TX,
++	MXC_DMA_CSPI2_RX,
++	MXC_DMA_CSPI2_TX,
++	MXC_DMA_CSPI3_RX,
++	MXC_DMA_CSPI3_TX,
++	MXC_DMA_ATA_RX,
++	MXC_DMA_ATA_TX,
++	MXC_DMA_MEMORY,
++	MXC_DMA_FIFO_MEMORY,
++	MXC_DMA_DSP_PACKET_DATA0_RD,
++	MXC_DMA_DSP_PACKET_DATA0_WR,
++	MXC_DMA_DSP_PACKET_DATA1_RD,
++	MXC_DMA_DSP_PACKET_DATA1_WR,
++	MXC_DMA_DSP_LOG0_CHNL,
++	MXC_DMA_DSP_LOG1_CHNL,
++	MXC_DMA_DSP_LOG2_CHNL,
++	MXC_DMA_DSP_LOG3_CHNL,
++	MXC_DMA_CSI_RX,
++	MXC_DMA_SPDIF_16BIT_TX,
++	MXC_DMA_SPDIF_16BIT_RX,
++	MXC_DMA_SPDIF_32BIT_TX,
++	MXC_DMA_SPDIF_32BIT_RX,
++	MXC_DMA_ASRC_A_RX,
++	MXC_DMA_ASRC_A_TX,
++	MXC_DMA_ASRC_B_RX,
++	MXC_DMA_ASRC_B_TX,
++	MXC_DMA_ASRC_C_RX,
++	MXC_DMA_ASRC_C_TX,
++	MXC_DMA_ESAI_16BIT_RX,
++	MXC_DMA_ESAI_16BIT_TX,
++	MXC_DMA_ESAI_24BIT_RX,
++	MXC_DMA_ESAI_24BIT_TX,
++	MXC_DMA_TEST_RAM2D2RAM,
++	MXC_DMA_TEST_RAM2RAM2D,
++	MXC_DMA_TEST_RAM2D2RAM2D,
++	MXC_DMA_TEST_RAM2RAM,
++	MXC_DMA_TEST_HW_CHAINING,
++	MXC_DMA_TEST_SW_CHAINING
++} mxc_dma_device_t;
++
++/*! This defines the prototype of callback funtion registered by the drivers */
++typedef void (*mxc_dma_callback_t) (void *arg, int error_status,
++				    unsigned int count);
++
++/*! This defines the type of DMA transfer requested */
++typedef enum mxc_dma_mode {
++	MXC_DMA_MODE_READ,
++	MXC_DMA_MODE_WRITE,
++} mxc_dma_mode_t;
++
++/*! This defines the DMA channel parameters */
++typedef struct mxc_dma_channel {
++	unsigned int active:1;	/*!< When there has a active tranfer, it is set to 1 */
++	unsigned int lock;	/*!< Defines the channel is allocated or not */
++	int curr_buf;		/*!< Current buffer */
++	mxc_dma_mode_t mode;	/*!< Read or Write */
++	unsigned int channel;	/*!< Channel info */
++	unsigned int dynamic:1;	/*!< Channel not statically allocated when 1 */
++	char *dev_name;		/*!< Device name */
++	void *private;		/*!< Private structure for platform */
++	mxc_dma_callback_t cb_fn;	/*!< The callback function */
++	void *cb_args;		/*!< The argument of callback function */
++} mxc_dma_channel_t;
++
++/*! This structure contains the information about a dma transfer */
++typedef struct mxc_dma_requestbuf {
++	dma_addr_t src_addr;	/*!< source address */
++	dma_addr_t dst_addr;	/*!< destination address */
++	int num_of_bytes;	/*!< the length of this transfer : bytes */
++} mxc_dma_requestbuf_t;
++
++/*!
++ * This function is generally called by the driver at open time.
++ * The DMA driver would do any initialization steps that is required
++ * to get the channel ready for data transfer.
++ *
++ * @param channel_id   a pre-defined id. The peripheral driver would specify
++ *                     the id associated with its peripheral. This would be
++ *                     used by the DMA driver to identify the peripheral
++ *                     requesting DMA and do the necessary setup on the
++ *                     channel associated with the particular peripheral.
++ *                     The DMA driver could use static or dynamic DMA channel
++ *                     allocation.
++ * @param dev_name     module name or device name
++ * @return returns a negative number on error if request for a DMA channel did not
++ *         succeed, returns the channel number to be used on success.
++ */
++extern int mxc_dma_request(mxc_dma_device_t channel_id, char *dev_name);
++
++/*!
++ * This function is generally called by the driver at close time. The DMA
++ * driver would do any cleanup associated with this channel.
++ *
++ * @param channel_num  the channel number returned at request time. This
++ *                     would be used by the DMA driver to identify the calling
++ *                     driver and do the necessary cleanup on the channel
++ *                     associated with the particular peripheral
++ * @return returns a negative number on error or 0 on success
++ */
++extern int mxc_dma_free(int channel_num);
++
++/*!
++ * This function would just configure the buffers specified by the user into
++ * dma channel. The caller must call mxc_dma_enable to start this transfer.
++ *
++ * @param channel_num  the channel number returned at request time. This
++ *                     would be used by the DMA driver to identify the calling
++ *                     driver and do the necessary cleanup on the channel
++ *                     associated with the particular peripheral
++ * @param dma_buf      an array of physical addresses to the user defined
++ *                     buffers. The caller must guarantee the dma_buf is
++ *                     available until the transfer is completed.
++ * @param num_buf      number of buffers in the array
++ * @param mode         specifies whether this is READ or WRITE operation
++ * @return This function returns a negative number on error if buffer could not be
++ *         added with DMA for transfer. On Success, it returns 0
++ */
++extern int mxc_dma_config(int channel_num, mxc_dma_requestbuf_t * dma_buf,
++			  int num_buf, mxc_dma_mode_t mode);
++
++/*!
++ * This function would just configure the scatterlist specified by the
++ * user into dma channel. This is a slight variation of mxc_dma_config(),
++ * it is provided for the convenience of drivers that have a scatterlist
++ * passed into them. It is the calling driver's responsibility to have the
++ * correct physical address filled in the "dma_address" field of the
++ * scatterlist.
++ *
++ * @param channel_num  the channel number returned at request time. This
++ *                     would be used by the DMA driver to identify the calling
++ *                     driver and do the necessary cleanup on the channel
++ *                     associated with the particular peripheral
++ * @param sg           a scatterlist of buffers. The caller must guarantee
++ *                     the dma_buf is available until the transfer is
++ *                     completed.
++ * @param num_buf      number of buffers in the array
++ * @param num_of_bytes total number of bytes to transfer. If set to 0, this
++ *                     would imply to use the length field of the scatterlist
++ *                     for each DMA transfer. Else it would calculate the size
++ *                     for each DMA transfer.
++ * @param mode         specifies whether this is READ or WRITE operation
++ * @return This function returns a negative number on error if buffer could not
++ *         be added with DMA for transfer. On Success, it returns 0
++ */
++extern int mxc_dma_sg_config(int channel_num, struct scatterlist *sg,
++			     int num_buf, int num_of_bytes,
++			     mxc_dma_mode_t mode);
++
++/*!
++ * This function is provided if the driver would like to set/change its
++ * callback function.
++ *
++ * @param channel_num  the channel number returned at request time. This
++ *                     would be used by the DMA driver to identify the calling
++ *                     driver and do the necessary cleanup on the channel
++ *                     associated with the particular peripheral
++ * @param callback     a callback function to provide notification on transfer
++ *                     completion, user could specify NULL if he does not wish
++ *                     to be notified
++ * @param arg          an argument that gets passed in to the callback
++ *                     function, used by the user to do any driver specific
++ *                     operations.
++ * @return this function returns a negative number on error if the callback
++ *         could not be set for the channel or 0 on success
++ */
++extern int mxc_dma_callback_set(int channel_num, mxc_dma_callback_t callback,
++				void *arg);
++
++/*!
++ * This stops the DMA channel and any ongoing transfers. Subsequent use of
++ * mxc_dma_enable() will restart the channel and restart the transfer.
++ *
++ * @param channel_num  the channel number returned at request time. This
++ *                     would be used by the DMA driver to identify the calling
++ *                     driver and do the necessary cleanup on the channel
++ *                     associated with the particular peripheral
++ * @return returns a negative number on error or 0 on success
++ */
++extern int mxc_dma_disable(int channel_num);
++
++/*!
++ * This starts DMA transfer. Or it restarts DMA on a stopped channel
++ * previously stopped with mxc_dma_disable().
++ *
++ * @param channel_num  the channel number returned at request time. This
++ *                     would be used by the DMA driver to identify the calling
++ *                     driver and do the necessary cleanup on the channel
++ *                     associated with the particular peripheral
++ * @return returns a negative number on error or 0 on success
++ */
++extern int mxc_dma_enable(int channel_num);
++
++#endif
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/hardware.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/hardware.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/hardware.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/hardware.h	2009-06-02 17:05:27.000000000 +0200
+@@ -29,13 +29,18 @@
+ #endif
+ 
+ #ifdef CONFIG_ARCH_MX2
++#ifndef CONFIG_MACH_MX25
+ # include <mach/mx2x.h>
++#endif
+ # ifdef CONFIG_MACH_MX21
+ #  include <mach/mx21.h>
+ # endif
+ # ifdef CONFIG_MACH_MX27
+ #  include <mach/mx27.h>
+ # endif
++# ifdef CONFIG_MACH_MX25
++#  include <mach/mx25.h>
++# endif
+ #endif
+ 
+ #ifdef CONFIG_ARCH_MX1
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/imxfb.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/imxfb.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/imxfb.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/imxfb.h	2009-06-02 17:05:26.000000000 +0200
+@@ -13,7 +13,8 @@
+ #define PCR_BPIX_4	(2 << 25)
+ #define PCR_BPIX_8	(3 << 25)
+ #define PCR_BPIX_12	(4 << 25)
+-#define PCR_BPIX_16	(4 << 25)
++#define PCR_BPIX_16	(5 << 25)
++#define PCR_BPIX_18	(6 << 25)
+ #define PCR_PIXPOL	(1 << 24)
+ #define PCR_FLMPOL	(1 << 23)
+ #define PCR_LPPOL	(1 << 22)
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-mx25.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-mx25.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/iomux-mx25.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,905 @@
++/*
++ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
++ *
++ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
++ *
++ * based on arch/arm/mach-mx25/mx25_pins.h
++ *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ * and
++ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
++ *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
++ *
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++#ifndef __IOMUX_MX25_H__
++#define __IOMUX_MX25_H__
++
++#include <mach/iomux-v3.h>
++
++/*
++ *
++ * @brief MX25 I/O Pin List
++ *
++ * @ingroup GPIO_MX25
++ */
++
++#ifndef __ASSEMBLY__
++
++/*
++ * IOMUX/PAD Bit field definitions
++ */
++
++#define MX25_PAD_A10__A10			IOMUX_PAD(A10, A10, 0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_A10__GPIO_4_0			IOMUX_PAD(A10, GPIO_4_0, 0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_A13__A13			IOMUX_PAD(A13, A13, 0x22C, 0x00c, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A13__GPIO_4_1			IOMUX_PAD(A13, GPIO_4_1, 0x22C, 0x00c, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A14__A14			IOMUX_PAD(A14, A14, 0x230, 0x010, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A14__GPIO_2_0			IOMUX_PAD(A14, GPIO_2_0, 0x230, 0x010, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A15__A15			IOMUX_PAD(A15, A15, 0x234, 0x014, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A15__GPIO_2_1			IOMUX_PAD(A15, GPIO_2_1, 0x234, 0x014, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A16__A16			IOMUX_PAD(A16, A16, 0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_A16__GPIO_2_2			IOMUX_PAD(A16, GPIO_2_2, 0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_A17__A17			IOMUX_PAD(A17, A17, 0x238, 0x01c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A17__GPIO_2_3			IOMUX_PAD(A17, GPIO_2_3, 0x238, 0x01c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A18__A18			IOMUX_PAD(A18, A18, 0x23c, 0x020, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A18__GPIO_2_4			IOMUX_PAD(A18, GPIO_2_4, 0x23c, 0x020, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A18__FEC_COL			IOMUX_PAD(A18, FEC_COL, 0x23c, 0x020, 0x17, 0x504, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_A19__A19			IOMUX_PAD(A19, A19, 0x240, 0x024, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A19__FEC_RX_ER			IOMUX_PAD(A19, FEC_RX_ER, 0x240, 0x024, 0x17, 0x518, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_A19__GPIO_2_5			IOMUX_PAD(A19, GPIO_2_5, 0x240, 0x024, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A20__A20			IOMUX_PAD(A20, A20, 0x244, 0x028, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A20__GPIO_2_6			IOMUX_PAD(A20, GPIO_2_6, 0x244, 0x028, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A20__FEC_RDATA2		IOMUX_PAD(A20, FEC_RDATA2, 0x244, 0x028, 0x17, 0x50c, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_A21__A21			IOMUX_PAD(A21, A21, 0x248, 0x02c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A21__GPIO_2_7			IOMUX_PAD(A21, GPIO_2_7, 0x248, 0x02c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A21__FEC_RDATA3		IOMUX_PAD(A21, FEC_RDATA3, 0x248, 0x02c, 0x17, 0x510, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_A22__A22			IOMUX_PAD(A22, A22, 0x000, 0x030, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A22__GPIO_2_8			IOMUX_PAD(A22, GPIO_2_8, 0x000, 0x030, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A23__A23			IOMUX_PAD(A23, A23, 0x24c, 0x034, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A23__GPIO_2_9			IOMUX_PAD(A23, GPIO_2_9, 0x24c, 0x034, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A24__A24			IOMUX_PAD(A24, A24, 0x250, 0x038, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A24__GPIO_2_10			IOMUX_PAD(A24, GPIO_2_10, 0x250, 0x038, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A24__FEC_RX_CLK		IOMUX_PAD(A24, FEC_RX_CLK, 0x250, 0x038, 0x17, 0x514, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_A25__A25			IOMUX_PAD(A25, A25, 0x254, 0x03c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A25__GPIO_2_11			IOMUX_PAD(A25, GPIO_2_11, 0x254, 0x03c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_A25__FEC_CRS			IOMUX_PAD(A25, FEC_CRS, 0x254, 0x03c, 0x17, 0x508, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_EB0__EB0			IOMUX_PAD(EB0, EB0, 0x258, 0x040, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_EB0__AUD4_TXD			IOMUX_PAD(EB0, AUD4_TXD, 0x258, 0x040, 0x14, 0x464, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_EB0__GPIO_2_12			IOMUX_PAD(EB0, GPIO_2_12, 0x258, 0x040, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_EB1__EB1			IOMUX_PAD(EB1, EB1, 0x25c, 0x044, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_EB1__AUD4_RXD			IOMUX_PAD(EB1, AUD4_RXD, 0x25c, 0x044, 0x14, 0x460, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_EB1__GPIO_2_13			IOMUX_PAD(EB1, GPIO_2_13, 0x25c, 0x044, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_OE__OE				IOMUX_PAD(OE, OE, 0x260, 0x048, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_OE__AUD4_TXC			IOMUX_PAD(OE, AUD4_TXC, 0x260, 0x048, 0x14, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_OE__GPIO_2_14			IOMUX_PAD(OE, GPIO_2_14, 0x260, 0x048, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CS0__CS0			IOMUX_PAD(CS0, CS0, 0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CS0__GPIO_4_2			IOMUX_PAD(CS0, GPIO_4_2, 0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CS1__CS1			IOMUX_PAD(CS1, CS1, 0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CS1__GPIO_4_3			IOMUX_PAD(CS1, GPIO_4_3, 0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CS4__CS4			IOMUX_PAD(CS4, CS4, 0x264, 0x054, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CS4__UART5_CTS			IOMUX_PAD(CS4, UART5_CTS, 0x264, 0x054, 0x13, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CS4__GPIO_3_20			IOMUX_PAD(CS4, GPIO_3_20, 0x264, 0x054, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CS5__CS5			IOMUX_PAD(CS5, CS5, 0x268, 0x058, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CS5__UART5_RTS			IOMUX_PAD(CS5, UART5_RTS, 0x268, 0x058, 0x13, 0x574, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CS5__GPIO_3_21			IOMUX_PAD(CS5, GPIO_3_21, 0x268, 0x058, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_NF_CE0__NF_CE0			IOMUX_PAD(NF_CE0, NF_CE0, 0x26c, 0x05c, 0x10, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_NF_CE0__GPIO_3_22		IOMUX_PAD(NF_CE0, GPIO_3_22, 0x26c, 0x05c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_ECB__ECB			IOMUX_PAD(ECB, ECB, 0x270, 0x060, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_ECB__UART5_TXD_MUX		IOMUX_PAD(ECB, UART5_TXD_MUX, 0x270, 0x060, 0x13, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_ECB__GPIO_3_23			IOMUX_PAD(ECB, GPIO_3_23, 0x270, 0x060, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LBA__LBA			IOMUX_PAD(LBA, LBA, 0x274, 0x064, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LBA__UART5_RXD_MUX		IOMUX_PAD(LBA, UART5_RXD_MUX, 0x274, 0x064, 0x13, 0x578, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LBA__GPIO_3_24			IOMUX_PAD(LBA, GPIO_3_24, 0x274, 0x064, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_BCLK__BCLK			IOMUX_PAD(BCLK, BCLK, 0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_BCLK__GPIO_4_4			IOMUX_PAD(BCLK, GPIO_4_4, 0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_RW__RW				IOMUX_PAD(RW, RW, 0x278, 0x06c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_RW__AUD4_TXFS			IOMUX_PAD(RW, AUD4_TXFS, 0x278, 0x06c, 0x14, 0x474, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_RW__GPIO_3_25			IOMUX_PAD(RW, GPIO_3_25, 0x278, 0x06c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_NFWE_B__NFWE_B			IOMUX_PAD(NFWE_B, NFWE_B, 0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFWE_B__GPIO_3_26		IOMUX_PAD(NFWE_B, GPIO_3_26, 0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFRE_B__NFRE_B			IOMUX_PAD(NFRE_B, NFRE_B, 0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFRE_B__GPIO_3_27		IOMUX_PAD(NFRE_B, GPIO_3_27, 0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFALE__NFALE			IOMUX_PAD(NFALE, NFALE, 0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFALE__GPIO_3_28		IOMUX_PAD(NFALE, GPIO_3_28, 0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFCLE__NFCLE			IOMUX_PAD(NFCLE, NFCLE, 0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFCLE__GPIO_3_29		IOMUX_PAD(NFCLE, GPIO_3_29, 0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFWP_B__NFWP_B			IOMUX_PAD(NFWP_B, NFWP_B, 0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFWP_B__GPIO_3_30		IOMUX_PAD(NFWP_B, GPIO_3_30, 0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_NFRB__NFRB			IOMUX_PAD(NFRB, NFRB, 0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PULL_KEEPER)
++#define MX25_PAD_NFRB__GPIO_3_31		IOMUX_PAD(NFRB, GPIO_3_31, 0x27c, 0x084, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D15__D15			IOMUX_PAD(D15, D15, 0x280, 0x088, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D15__LD16			IOMUX_PAD(D15, LD16, 0x280, 0x088, 0x01, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D15__GPIO_4_5			IOMUX_PAD(D15, GPIO_4_5, 0x280, 0x088, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D14__D14			IOMUX_PAD(D14, D14, 0x284, 0x08c, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D14__LD17			IOMUX_PAD(D14, LD17, 0x284, 0x08c, 0x01, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D14__GPIO_4_6			IOMUX_PAD(D14, GPIO_4_6, 0x284, 0x08c, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D13__D13			IOMUX_PAD(D13, D13, 0x288, 0x090, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D13__LD18			IOMUX_PAD(D13, LD18, 0x288, 0x090, 0x01, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D13__GPIO_4_7			IOMUX_PAD(D13, GPIO_4_7, 0x288, 0x090, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D12__D12			IOMUX_PAD(D12, D12, 0x28c, 0x094, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D12__GPIO_4_8			IOMUX_PAD(D12, GPIO_4_8, 0x28c, 0x094, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D11__D11			IOMUX_PAD(D11, D11, 0x290, 0x098, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D11__GPIO_4_9			IOMUX_PAD(D11, GPIO_4_9, 0x290, 0x098, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D10__D10			IOMUX_PAD(D10, D10, 0x294, 0x09c, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D10__GPIO_4_10			IOMUX_PAD(D10, GPIO_4_10, 0x294, 0x09c, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D10__USBOTG_OC			IOMUX_PAD(D10, USBOTG_OC, 0x294, 0x09c, 0x06, 0x57c, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D9__D9				IOMUX_PAD(D9, D9, 0x298, 0x0a0, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D9__GPIO_4_11			IOMUX_PAD(D9, GPIO_4_11, 0x298, 0x0a0, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D9__USBH2_PWR			IOMUX_PAD(D9, USBH2_PWR, 0x298, 0x0a0, 0x06, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D8__D8				IOMUX_PAD(D8, D8, 0x29c, 0x0a4, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D8__GPIO_4_12			IOMUX_PAD(D8, GPIO_4_12, 0x29c, 0x0a4, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D8__USBH2_OC			IOMUX_PAD(D8, USBH2_OC, 0x29c, 0x0a4, 0x06, 0x580, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D7__D7				IOMUX_PAD(D7, D7, 0x2a0, 0x0a8, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D7__GPIO_4_13			IOMUX_PAD(D7, GPIO_4_13, 0x2a0, 0x0a8, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D6__D6				IOMUX_PAD(D6, D6, 0x2a4, 0x0ac, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D6__GPIO_4_14			IOMUX_PAD(D6, GPIO_4_14, 0x2a4, 0x0ac, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D5__D5				IOMUX_PAD(D5, D5, 0x2a8, 0x0b0, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D5__GPIO_4_15			IOMUX_PAD(D5, GPIO_4_15, 0x2a8, 0x0b0, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D4__D4				IOMUX_PAD(D4, D4, 0x2ac, 0x0b4, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D4__GPIO_4_16			IOMUX_PAD(D4, GPIO_4_16, 0x2ac, 0x0b4, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D3__D3				IOMUX_PAD(D3, D3, 0x2b0, 0x0b8, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D3__GPIO_4_17			IOMUX_PAD(D3, GPIO_4_17, 0x2b0, 0x0b8, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D2__D2				IOMUX_PAD(D2, D2, 0x2b4, 0x0bc, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D2__GPIO_4_18			IOMUX_PAD(D2, GPIO_4_18, 0x2b4, 0x0bc, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D1__D1				IOMUX_PAD(D1, D1, 0x2b8, 0x0c0, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D1__GPIO_4_19			IOMUX_PAD(D1, GPIO_4_19, 0x2b8, 0x0c0, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D0__D0				IOMUX_PAD(D0, D0, 0x2bc, 0x0c4, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_D0__GPIO_4_20			IOMUX_PAD(D0, GPIO_4_20, 0x2bc, 0x0c4, 0x05, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD0__LD0			IOMUX_PAD(LD0, LD0, 0x2c0, 0x0c8, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD0__CSI_D0			IOMUX_PAD(LD0, CSI_D0, 0x2c0, 0x0c8, 0x12, 0x488, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD0__GPIO_2_15			IOMUX_PAD(LD0, GPIO_2_15, 0x2c0, 0x0c8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD1__LD1			IOMUX_PAD(LD1, LD1, 0x2c4, 0x0cc, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD1__CSI_D1			IOMUX_PAD(LD1, CSI_D1, 0x2c4, 0x0cc, 0x12, 0x48c, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD1__GPIO_2_16			IOMUX_PAD(LD1, GPIO_2_16, 0x2c4, 0x0cc, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD2__LD2			IOMUX_PAD(LD2, LD2, 0x2c8, 0x0d0, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD2__GPIO_2_17			IOMUX_PAD(LD2, GPIO_2_17, 0x2c8, 0x0d0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD3__LD3			IOMUX_PAD(LD3, LD3, 0x2cc, 0x0d4, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD3__GPIO_2_18			IOMUX_PAD(LD3, GPIO_2_18, 0x2cc, 0x0d4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD4__LD4			IOMUX_PAD(LD4, LD4, 0x2d0, 0x0d8, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD4__GPIO_2_19			IOMUX_PAD(LD4, GPIO_2_19, 0x2d0, 0x0d8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD5__LD5			IOMUX_PAD(LD5, LD5, 0x2d4, 0x0dc, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD5__GPIO_1_19			IOMUX_PAD(LD5, GPIO_1_19, 0x2d4, 0x0dc, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD6__LD6			IOMUX_PAD(LD6, LD6, 0x2d8, 0x0e0, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD6__GPIO_1_20			IOMUX_PAD(LD6, GPIO_1_20, 0x2d8, 0x0e0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD7__LD7			IOMUX_PAD(LD7, LD7, 0x2dc, 0x0e4, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD7__GPIO_1_21			IOMUX_PAD(LD7, GPIO_1_21, 0x2dc, 0x0e4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD8__LD8			IOMUX_PAD(LD8, LD8, 0x2e0, 0x0e8, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD8__FEC_TX_ERR		IOMUX_PAD(LD8, FEC_TX_ERR, 0x2e0, 0x0e8, 0x15, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD9__LD9			IOMUX_PAD(LD9, LD9, 0x2e4, 0x0ec, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD9__FEC_COL			IOMUX_PAD(LD9, FEC_COL, 0x2e4, 0x0ec, 0x15, 0x504, 1, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD10__LD10			IOMUX_PAD(LD10, LD10, 0x2e8, 0x0f0, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD10__FEC_RX_ER		IOMUX_PAD(LD10, FEC_RX_ER, 0x2e8, 0x0f0, 0x15, 0x518, 1, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD11__LD11			IOMUX_PAD(LD11, LD11, 0x2ec, 0x0f4, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD11__FEC_RDATA2		IOMUX_PAD(LD11, FEC_RDATA2, 0x2ec, 0x0f4, 0x15, 0x50c, 1, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD12__LD12			IOMUX_PAD(LD12, LD12, 0x2f0, 0x0f8, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD12__FEC_RDATA3		IOMUX_PAD(LD12, FEC_RDATA3, 0x2f0, 0x0f8, 0x15, 0x510, 1, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD13__LD13			IOMUX_PAD(LD13, LD13, 0x2f4, 0x0fc, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD13__FEC_TDATA2		IOMUX_PAD(LD13, FEC_TDATA2, 0x2f4, 0x0fc, 0x15, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD14__LD14			IOMUX_PAD(LD14, LD14, 0x2f8, 0x100, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD14__FEC_TDATA3		IOMUX_PAD(LD14, FEC_TDATA3, 0x2f8, 0x100, 0x15, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_LD15__LD15			IOMUX_PAD(LD15, LD15, 0x2fc, 0x104, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LD15__FEC_RX_CLK		IOMUX_PAD(LD15, FEC_RX_CLK, 0x2fc, 0x104, 0x15, 0x514, 1, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_HSYNC__HSYNC			IOMUX_PAD(HSYNC, HSYNC, 0x300, 0x108, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_HSYNC__GPIO_1_22		IOMUX_PAD(HSYNC, GPIO_1_22, 0x300, 0x108, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_VSYNC__VSYNC			IOMUX_PAD(VSYNC, VSYNC, 0x304, 0x10c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_VSYNC__GPIO_1_23		IOMUX_PAD(VSYNC, GPIO_1_23, 0x304, 0x10c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LSCLK__LSCLK			IOMUX_PAD(LSCLK, LSCLK, 0x308, 0x110, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_LSCLK__GPIO_1_24		IOMUX_PAD(LSCLK, GPIO_1_24, 0x308, 0x110, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_OE_ACD__OE_ACD			IOMUX_PAD(OE_ACD, OE_ACD, 0x30c, 0x114, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_OE_ACD__GPIO_1_25		IOMUX_PAD(OE_ACD, GPIO_1_25, 0x30c, 0x114, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CONTRAST__CONTRAST		IOMUX_PAD(CONTRAST, CONTRAST, 0x310, 0x118, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CONTRAST__FEC_CRS		IOMUX_PAD(CONTRAST, FEC_CRS, 0x310, 0x118, 0x15, 0x508, 1, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_PWM__PWM			IOMUX_PAD(PWM, PWM, 0x314, 0x11c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_PWM__GPIO_1_26			IOMUX_PAD(PWM, GPIO_1_26, 0x314, 0x11c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_PWM__USBH2_OC			IOMUX_PAD(PWM, USBH2_OC, 0x314, 0x11c, 0x16, 0x580, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D2__CSI_D2			IOMUX_PAD(CSI_D2, CSI_D2, 0x318, 0x120, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D2__UART5_RXD_MUX		IOMUX_PAD(CSI_D2, UART5_RXD_MUX, 0x318, 0x120, 0x11, 0x578, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D2__GPIO_1_27		IOMUX_PAD(CSI_D2, GPIO_1_27, 0x318, 0x120, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D3__CSI_D3			IOMUX_PAD(CSI_D3, CSI_D3, 0x31c, 0x124, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D3__GPIO_1_28		IOMUX_PAD(CSI_D3, GPIO_1_28, 0x31c, 0x124, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D4__CSI_D4			IOMUX_PAD(CSI_D4, CSI_D4, 0x320, 0x128, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D4__UART5_RTS		IOMUX_PAD(CSI_D4, UART5_RTS, 0x320, 0x128, 0x11, 0x574, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D4__GPIO_1_29		IOMUX_PAD(CSI_D4, GPIO_1_29, 0x320, 0x128, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D5__CSI_D5			IOMUX_PAD(CSI_D5, CSI_D5, 0x324, 0x12c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D5__GPIO_1_30		IOMUX_PAD(CSI_D5, GPIO_1_30, 0x324, 0x12c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D6__CSI_D6			IOMUX_PAD(CSI_D6, CSI_D6, 0x328, 0x130, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D6__GPIO_1_31		IOMUX_PAD(CSI_D6, GPIO_1_31, 0x328, 0x130, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D7__CSI_D7			IOMUX_PAD(CSI_D7, CSI_D7, 0x32c, 0x134, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D7__GPIO_1_6		IOMUX_PAD(CSI_D7, GPIO_1_6, 0x32c, 0x134, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D8__CSI_D8			IOMUX_PAD(CSI_D8, CSI_D8, 0x330, 0x138, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D8__GPIO_1_7		IOMUX_PAD(CSI_D8, GPIO_1_7, 0x330, 0x138, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D9__CSI_D9			IOMUX_PAD(CSI_D9, CSI_D9, 0x334, 0x13c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_D9__GPIO_4_21		IOMUX_PAD(CSI_D9, GPIO_4_21, 0x334, 0x13c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_MCLK__CSI_MCLK		IOMUX_PAD(CSI_MCLK, CSI_MCLK, 0x338, 0x140, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_MCLK__GPIO_1_8		IOMUX_PAD(CSI_MCLK, GPIO_1_8, 0x338, 0x140, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		IOMUX_PAD(CSI_VSYNC, CSI_VSYNC, 0x33c, 0x144, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_VSYNC__GPIO_1_9		IOMUX_PAD(CSI_VSYNC, GPIO_1_9, 0x33c, 0x144, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		IOMUX_PAD(CSI_HSYNC, CSI_HSYNC, 0x340, 0x148, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_HSYNC__GPIO_1_10		IOMUX_PAD(CSI_HSYNC, GPIO_1_10, 0x340, 0x148, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		IOMUX_PAD(CSI_PIXCLK, CSI_PIXCLK, 0x344, 0x14c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		IOMUX_PAD(CSI_PIXCLK, GPIO_1_11, 0x344, 0x14c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_I2C1_CLK__I2C1_CLK		IOMUX_PAD(I2C1_CLK, I2C1_CLK, 0x348, 0x150, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_I2C1_CLK__GPIO_1_12		IOMUX_PAD(I2C1_CLK, GPIO_1_12, 0x348, 0x150, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_I2C1_DAT__I2C1_DAT		IOMUX_PAD(I2C1_DAT, I2C1_DAT, 0x34c, 0x154, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_I2C1_DAT__GPIO_1_13		IOMUX_PAD(I2C1_DAT, GPIO_1_13, 0x34c, 0x154, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		IOMUX_PAD(CSPI1_MOSI, CSPI1_MOSI, 0x350, 0x158, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		IOMUX_PAD(CSPI1_MOSI, GPIO_1_14, 0x350, 0x158, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		IOMUX_PAD(CSPI1_MISO, CSPI1_MISO, 0x354, 0x15c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_MISO__GPIO_1_15		IOMUX_PAD(CSPI1_MISO, GPIO_1_15, 0x354, 0x15c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		IOMUX_PAD(CSPI1_SS0, CSPI1_SS0, 0x358, 0x160, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_SS0__GPIO_1_16		IOMUX_PAD(CSPI1_SS0, GPIO_1_16, 0x358, 0x160, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		IOMUX_PAD(CSPI1_SS1, CSPI1_SS1, 0x35c, 0x164, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_SS1__GPIO_1_17		IOMUX_PAD(CSPI1_SS1, GPIO_1_17, 0x35c, 0x164, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		IOMUX_PAD(CSPI1_SCLK, CSPI1_SCLK, 0x360, 0x168, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		IOMUX_PAD(CSPI1_SCLK, GPIO_1_18, 0x360, 0x168, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		IOMUX_PAD(CSPI1_RDY, CSPI1_RDY, 0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PULL_KEEPER)
++#define MX25_PAD_CSPI1_RDY__GPIO_2_22		IOMUX_PAD(CSPI1_RDY, GPIO_2_22, 0x364, 0x16c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_RXD__UART1_RXD		IOMUX_PAD(UART1_RXD, UART1_RXD, 0x368, 0x170, 0x10, 0, 0, PAD_CTL_PULL_DOWN_100K)
++#define MX25_PAD_UART1_RXD__GPIO_4_22		IOMUX_PAD(UART1_RXD, GPIO_4_22, 0x368, 0x170, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_TXD__UART1_TXD		IOMUX_PAD(UART1_TXD, UART1_TXD, 0x36c, 0x174, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_TXD__GPIO_4_23		IOMUX_PAD(UART1_TXD, GPIO_4_23, 0x36c, 0x174, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_RTS__UART1_RTS		IOMUX_PAD(UART1_RTS, UART1_RTS, 0x370, 0x178, 0x10, 0, 0, PAD_CTL_PULL_UP_100K)
++#define MX25_PAD_UART1_RTS__CSI_D0		IOMUX_PAD(UART1_RTS, CSI_D0, 0x370, 0x178, 0x11, 0x488, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_RTS__GPIO_4_24		IOMUX_PAD(UART1_RTS, GPIO_4_24, 0x370, 0x178, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_CTS__UART1_CTS		IOMUX_PAD(UART1_CTS, UART1_CTS, 0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PULL_UP_100K)
++#define MX25_PAD_UART1_CTS__CSI_D1		IOMUX_PAD(UART1_CTS, CSI_D1, 0x374, 0x17c, 0x11, 0x48c, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART1_CTS__GPIO_4_25		IOMUX_PAD(UART1_CTS, GPIO_4_25, 0x374, 0x17c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_RXD__UART2_RXD		IOMUX_PAD(UART2_RXD, UART2_RXD, 0x378, 0x180, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_RXD__GPIO_4_26		IOMUX_PAD(UART2_RXD, GPIO_4_26, 0x378, 0x180, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(UART2_TXD, UART2_TXD, 0x37c, 0x184, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_TXD__GPIO_4_27		IOMUX_PAD(UART2_TXD, GPIO_4_27, 0x37c, 0x184, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_RTS__UART2_RTS		IOMUX_PAD(UART2_RTS, UART2_RTS, 0x380, 0x188, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_RTS__FEC_COL		IOMUX_PAD(UART2_RTS, FEC_COL, 0x380, 0x188, 0x12, 0x504, 2, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_UART2_RTS__GPIO_4_28		IOMUX_PAD(UART2_RTS, GPIO_4_28, 0x380, 0x188, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_CTS__FEC_RX_ER		IOMUX_PAD(UART2_CTS, FEC_RX_ER, 0x384, 0x18c, 0x12, 0x518, 2, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_UART2_CTS__UART2_CTS		IOMUX_PAD(UART2_CTS, UART2_CTS, 0x384, 0x18c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_UART2_CTS__GPIO_4_29		IOMUX_PAD(UART2_CTS, GPIO_4_29, 0x384, 0x18c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_CMD__SD1_CMD		IOMUX_PAD(SD1_CMD, SD1_CMD, 0x388, 0x190, 0x10, 0, 0, PAD_CTL_PULL_UP_47K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_CMD__FEC_RDATA2		IOMUX_PAD(SD1_CMD, FEC_RDATA2, 0x388, 0x190, 0x12, 0x50c, 2, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_CMD__GPIO_2_23		IOMUX_PAD(SD1_CMD, GPIO_2_23, 0x388, 0x190, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_CLK__SD1_CLK		IOMUX_PAD(SD1_CLK, SD1_CLK, 0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PULL_UP_47K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_CLK__FEC_RDATA3		IOMUX_PAD(SD1_CLK, FEC_RDATA3, 0x38c, 0x194, 0x12, 0x510, 2, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_CLK__GPIO_2_24		IOMUX_PAD(SD1_CLK, GPIO_2_24, 0x38c, 0x194, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_DATA0__SD1_DATA0		IOMUX_PAD(SD1_DATA0, SD1_DATA0, 0x390, 0x198, 0x10, 0, 0, PAD_CTL_PULL_UP_47K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_DATA0__GPIO_2_25		IOMUX_PAD(SD1_DATA0, GPIO_2_25, 0x390, 0x198, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_DATA1__SD1_DATA1		IOMUX_PAD(SD1_DATA1, SD1_DATA1, 0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PULL_UP_47K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_DATA1__AUD7_RXD		IOMUX_PAD(SD1_DATA1, AUD7_RXD, 0x394, 0x19c, 0x13, 0x478, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_DATA1__GPIO_2_26		IOMUX_PAD(SD1_DATA1, GPIO_2_26, 0x394, 0x19c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_DATA2__SD1_DATA2		IOMUX_PAD(SD1_DATA2, SD1_DATA2, 0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PULL_UP_47K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		IOMUX_PAD(SD1_DATA2, FEC_RX_CLK, 0x398, 0x1a0, 0x15, 0x514, 2, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_DATA2__GPIO_2_27		IOMUX_PAD(SD1_DATA2, GPIO_2_27, 0x398, 0x1a0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(SD1_DATA3, SD1_DATA3, 0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PULL_UP_47K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_DATA3__FEC_CRS		IOMUX_PAD(SD1_DATA3, FEC_CRS, 0x39c, 0x1a4, 0x10, 0x508, 2, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_SD1_DATA3__GPIO_2_28		IOMUX_PAD(SD1_DATA3, GPIO_2_28, 0x39c, 0x1a4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_ROW0__KPP_ROW0		IOMUX_PAD(KPP_ROW0, KPP_ROW0, 0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PULL_KEEPER)
++#define MX25_PAD_KPP_ROW0__GPIO_2_29		IOMUX_PAD(KPP_ROW0, GPIO_2_29, 0x3a0, 0x1a8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_ROW1__KPP_ROW1		IOMUX_PAD(KPP_ROW1, KPP_ROW1, 0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PULL_KEEPER)
++#define MX25_PAD_KPP_ROW1__GPIO_2_30		IOMUX_PAD(KPP_ROW1, GPIO_2_30, 0x3a4, 0x1ac, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_ROW2__KPP_ROW2		IOMUX_PAD(KPP_ROW2, KPP_ROW2, 0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PULL_KEEPER)
++#define MX25_PAD_KPP_ROW2__CSI_D0		IOMUX_PAD(KPP_ROW2, CSI_D0, 0x3a8, 0x1b0, 0x13, 0x488, 2, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_ROW2__GPIO_2_31		IOMUX_PAD(KPP_ROW2, GPIO_2_31, 0x3a8, 0x1b0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_ROW3__KPP_ROW3		IOMUX_PAD(KPP_ROW3, KPP_ROW3, 0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PULL_KEEPER)
++#define MX25_PAD_KPP_ROW3__CSI_LD1		IOMUX_PAD(KPP_ROW3, CSI_LD1, 0x3ac, 0x1b4, 0x13, 0x48c, 2, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_ROW3__GPIO_3_0		IOMUX_PAD(KPP_ROW3, GPIO_3_0, 0x3ac, 0x1b4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_COL0__KPP_COL0		IOMUX_PAD(KPP_COL0, KPP_COL0, 0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PULL_KEEPER | PAD_CTL_OUTPUT_OPEN_DRAIN)
++#define MX25_PAD_KPP_COL0__GPIO_3_1		IOMUX_PAD(KPP_COL0, GPIO_3_1, 0x3b0, 0x1b8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_COL1__KPP_COL1		IOMUX_PAD(KPP_COL1, KPP_COL1, 0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PULL_KEEPER | PAD_CTL_OUTPUT_OPEN_DRAIN)
++#define MX25_PAD_KPP_COL1__GPIO_3_2		IOMUX_PAD(KPP_COL1, GPIO_3_2, 0x3b4, 0x1bc, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_COL2__KPP_COL2		IOMUX_PAD(KPP_COL2, KPP_COL2, 0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PULL_KEEPER | PAD_CTL_OUTPUT_OPEN_DRAIN)
++#define MX25_PAD_KPP_COL2__GPIO_3_3		IOMUX_PAD(KPP_COL2, GPIO_3_3, 0x3b8, 0x1c0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_KPP_COL3__KPP_COL3		IOMUX_PAD(KPP_COL3, KPP_COL3, 0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PULL_KEEPER | PAD_CTL_OUTPUT_OPEN_DRAIN)
++#define MX25_PAD_KPP_COL3__GPIO_3_4		IOMUX_PAD(KPP_COL3, GPIO_3_4, 0x3bc, 0x1c4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_MDC__FEC_MDC		IOMUX_PAD(FEC_MDC, FEC_MDC, 0x3c0, 0x1c8, 0x10, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_MDC__AUD4_TXD		IOMUX_PAD(FEC_MDC, AUD4_TXD, 0x3c0, 0x1c8, 0x12, 0x464, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_MDC__GPIO_3_5		IOMUX_PAD(FEC_MDC, GPIO_3_5, 0x3c0, 0x1c8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_MDIO__FEC_MDIO		IOMUX_PAD(FEC_MDIO, FEC_MDIO, 0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYSTERESIS | PAD_CTL_PULL_UP_22K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_MDIO__AUD4_RXD		IOMUX_PAD(FEC_MDIO, AUD4_RXD, 0x3c4, 0x1cc, 0x12, 0x460, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_MDIO__GPIO_3_6		IOMUX_PAD(FEC_MDIO, GPIO_3_6, 0x3c4, 0x1cc, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		IOMUX_PAD(FEC_TDATA0, FEC_TDATA0, 0x3c8, 0x1d0, 0x10, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_TDATA0__GPIO_3_7		IOMUX_PAD(FEC_TDATA0, GPIO_3_7, 0x3c8, 0x1d0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		IOMUX_PAD(FEC_TDATA1, FEC_TDATA1, 0x3cc, 0x1d4, 0x10, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		IOMUX_PAD(FEC_TDATA1, AUD4_TXFS, 0x3cc, 0x1d4, 0x12, 0x474, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_TDATA1__GPIO_3_8		IOMUX_PAD(FEC_TDATA1, GPIO_3_8, 0x3cc, 0x1d4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		IOMUX_PAD(FEC_TX_EN, FEC_TX_EN, 0x3d0, 0x1d8, 0x10, 0, 0, PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_TX_EN__GPIO_3_9   		IOMUX_PAD(FEC_TX_EN, GPIO_3_9   , 0x3d0, 0x1d8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		IOMUX_PAD(FEC_RDATA0, FEC_RDATA0, 0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PULL_DOWN_100K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_RDATA0__GPIO_3_10		IOMUX_PAD(FEC_RDATA0, GPIO_3_10, 0x3d4, 0x1dc, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		IOMUX_PAD(FEC_RDATA1, FEC_RDATA1, 0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PULL_DOWN_100K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_RDATA1__GPIO_3_11		IOMUX_PAD(FEC_RDATA1, GPIO_3_11, 0x3d8, 0x1e0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		IOMUX_PAD(FEC_RX_DV, FEC_RX_DV, 0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PULL_DOWN_100K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_RX_DV__CAN2_RX		IOMUX_PAD(FEC_RX_DV, CAN2_RX, 0x3dc, 0x1e4, 0x14, 0x484, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_RX_DV__GPIO_3_12		IOMUX_PAD(FEC_RX_DV, GPIO_3_12, 0x3dc, 0x1e4, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		IOMUX_PAD(FEC_TX_CLK, FEC_TX_CLK, 0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYSTERESIS | PAD_CTL_PULL_DOWN_100K | PAD_CTL_SLEW_RATE_FAST)
++#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		IOMUX_PAD(FEC_TX_CLK, GPIO_3_13, 0x3e0, 0x1e8, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_RTCK__RTCK			IOMUX_PAD(RTCK, RTCK, 0x3e4, 0x1ec, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_RTCK__OWIRE			IOMUX_PAD(RTCK, OWIRE, 0x3e4, 0x1ec, 0x11, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_RTCK__GPIO_3_14		IOMUX_PAD(RTCK, GPIO_3_14, 0x3e4, 0x1ec, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_DE_B__DE_B			IOMUX_PAD(DE_B, DE_B, 0x3ec, 0x1f0, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_DE_B__GPIO_2_20		IOMUX_PAD(DE_B, GPIO_2_20, 0x3ec, 0x1f0, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_TDO__TDO			IOMUX_PAD(TDO, TDO, 0x3e8, 0x000, 0x00, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_A__GPIO_A			IOMUX_PAD(GPIO_A, GPIO_A, 0x3f0, 0x1f4, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_A__USBOTG_PWR		IOMUX_PAD(GPIO_A, USBOTG_PWR, 0x3f0, 0x1f4, 0x12, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_B__GPIO_B			IOMUX_PAD(GPIO_B, GPIO_B, 0x3f4, 0x1f8, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_B__USBOTG_OC		IOMUX_PAD(GPIO_B, USBOTG_OC, 0x3f4, 0x1f8, 0x12, 0x57c, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_C__GPIO_C			IOMUX_PAD(GPIO_C, GPIO_C, 0x3f8, 0x1fc, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_C__CAN2_TX		IOMUX_PAD(GPIO_C, CAN2_TX, 0x3f8, 0x1fc, 0x16, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_D__GPIO_D			IOMUX_PAD(GPIO_D, GPIO_D, 0x3fc, 0x200, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_D__CAN2_RX		IOMUX_PAD(GPIO_D, CAN2_RX, 0x3fc, 0x200, 0x16, 0x484, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_E__GPIO_E			IOMUX_PAD(GPIO_E, GPIO_E, 0x400, 0x204, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_E__AUD7_TXD		IOMUX_PAD(GPIO_E, AUD7_TXD, 0x400, 0x204, 0x14, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_F__GPIO_F			IOMUX_PAD(GPIO_F, GPIO_F, 0x404, 0x208, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_GPIO_F__AUD7_TXC		IOMUX_PAD(GPIO_F, AUD7_TXC, 0x404, 0x208, 0x14, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		IOMUX_PAD(EXT_ARMCLK, EXT_ARMCLK, 0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		IOMUX_PAD(EXT_ARMCLK, GPIO_3_15, 0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	IOMUX_PAD(UPLL_BYPCLK, UPLL_BYPCLK, 0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		IOMUX_PAD(UPLL_BYPCLK, GPIO_3_16, 0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		IOMUX_PAD(VSTBY_REQ, VSTBY_REQ, 0x408, 0x214, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		IOMUX_PAD(VSTBY_REQ, AUD7_TXFS, 0x408, 0x214, 0x14, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_VSTBY_REQ__GPIO_3_17		IOMUX_PAD(VSTBY_REQ, GPIO_3_17, 0x408, 0x214, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		IOMUX_PAD(VSTBY_ACK, VSTBY_ACK, 0x40c, 0x218, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_VSTBY_ACK__GPIO_3_18		IOMUX_PAD(VSTBY_ACK, GPIO_3_18, 0x40c, 0x218, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_POWER_FAIL__POWER_FAIL		IOMUX_PAD(POWER_FAIL, POWER_FAIL, 0x410, 0x21c, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_POWER_FAIL__AUD7_RXD		IOMUX_PAD(POWER_FAIL, AUD7_RXD, 0x410, 0x21c, 0x14, 0x478, 1, 0 | NO_PAD_CTRL)
++#define MX25_PAD_POWER_FAIL__GPIO_3_19		IOMUX_PAD(POWER_FAIL, GPIO_3_19, 0x410, 0x21c, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CLKO__CLKO			IOMUX_PAD(CLKO, CLKO, 0x414, 0x220, 0x10, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_CLKO__GPIO_2_21		IOMUX_PAD(CLKO, GPIO_2_21, 0x414, 0x220, 0x15, 0, 0, 0 | NO_PAD_CTRL)
++#define MX25_PAD_BOOT_MODE0__BOOT_MODE0		IOMUX_PAD(BOOT_MODE0, BOOT_MODE0, 0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_BOOT_MODE0__GPIO_4_30		IOMUX_PAD(BOOT_MODE0, GPIO_4_30, 0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_BOOT_MODE1__BOOT_MODE1		IOMUX_PAD(BOOT_MODE1, BOOT_MODE1, 0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_BOOT_MODE1__GPIO_4_31		IOMUX_PAD(BOOT_MODE1, GPIO_4_31, 0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
++
++#define MX25_PAD_CTL_GRP_DVS_MISC		IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_FEC		IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DVS_JTAG		IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_NFC		IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_CSI		IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_WEIM		IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_DDR		IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DVS_CRM		IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_KPP		IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_SDHC1		IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_LCD		IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_UART		IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DVS_NFC		IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DVS_CSI		IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DSE_CSPI1		IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DDRTYPE		IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DVS_SDHC1		IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
++#define MX25_PAD_CTL_GRP_DVS_LCD		IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
++
++#if 0
++enum {
++	GPIO_A,
++	GPIO_B,
++	GPIO_C,
++	GPIO_D,
++	GPIO_E,
++	GPIO_F,
++	GPIO_1_6,
++	GPIO_1_7,
++	GPIO_1_8,
++	GPIO_1_9,
++	GPIO_1_10,
++	GPIO_1_11,
++	GPIO_1_12,
++	GPIO_1_13,
++	GPIO_1_14,
++	GPIO_1_15,
++	GPIO_1_16,
++	GPIO_1_17,
++	GPIO_1_18,
++	GPIO_1_19,
++	GPIO_1_20,
++	GPIO_1_21,
++	GPIO_1_22,
++	GPIO_1_23,
++	GPIO_1_24,
++	GPIO_1_25,
++	GPIO_1_26,
++	GPIO_1_27,
++	GPIO_1_28,
++	GPIO_1_29,
++	GPIO_1_30,
++	GPIO_1_31,
++	GPIO_2_0,
++	GPIO_2_1,
++	GPIO_2_2,
++	GPIO_2_3,
++	GPIO_2_4,
++	GPIO_2_5,
++	GPIO_2_6,
++	GPIO_2_7,
++	GPIO_2_8,
++	GPIO_2_9,
++	GPIO_2_10,
++	GPIO_2_11,
++	GPIO_2_12,
++	GPIO_2_13,
++	GPIO_2_14,
++	GPIO_2_15,
++	GPIO_2_16,
++	GPIO_2_17,
++	GPIO_2_18,
++	GPIO_2_19,
++	GPIO_2_20,
++	GPIO_2_21,
++	GPIO_2_22,
++	GPIO_2_23,
++	GPIO_2_24,
++	GPIO_2_25,
++	GPIO_2_26,
++	GPIO_2_27,
++	GPIO_2_28,
++	GPIO_2_29,
++	GPIO_2_30,
++	GPIO_2_31,
++	GPIO_3_0,
++	GPIO_3_1,
++	GPIO_3_2,
++	GPIO_3_3,
++	GPIO_3_4,
++	GPIO_3_5,
++	GPIO_3_6,
++	GPIO_3_7,
++	GPIO_3_8,
++	GPIO_3_9,
++	GPIO_3_10,
++	GPIO_3_11,
++	GPIO_3_12,
++	GPIO_3_13,
++	GPIO_3_14,
++	GPIO_3_15,
++	GPIO_3_16,
++	GPIO_3_17,
++	GPIO_3_18,
++	GPIO_3_19,
++	GPIO_3_20,
++	GPIO_3_21,
++	GPIO_3_22,
++	GPIO_3_23,
++	GPIO_3_24,
++	GPIO_3_25,
++	GPIO_3_26,
++	GPIO_3_27,
++	GPIO_3_28,
++	GPIO_3_29,
++	GPIO_3_30,
++	GPIO_3_31,
++	GPIO_4_0,
++	GPIO_4_1,
++	GPIO_4_2,
++	GPIO_4_3,
++	GPIO_4_4,
++	GPIO_4_5,
++	GPIO_4_6,
++	GPIO_4_7,
++	GPIO_4_8,
++	GPIO_4_9,
++	GPIO_4_10,
++	GPIO_4_11,
++	GPIO_4_12,
++	GPIO_4_13,
++	GPIO_4_14,
++	GPIO_4_15,
++	GPIO_4_16,
++	GPIO_4_17,
++	GPIO_4_18,
++	GPIO_4_19,
++	GPIO_4_20,
++	GPIO_4_21,
++	GPIO_4_22,
++	GPIO_4_23,
++	GPIO_4_24,
++	GPIO_4_25,
++	GPIO_4_26,
++	GPIO_4_27,
++	GPIO_4_28,
++	GPIO_4_29,
++	GPIO_4_30,
++	GPIO_4_31,
++};
++
++#define IOMUX_TO_GPIO(__pad_desc) ({		\
++	int __gpio = -1;			\
++	struct pad_desc *__pd = __pad_desc;	\
++						\
++	switch (__pd->mux_ctrl_ofs) {		\
++	case MX25_PAD_GPIO_A__GPIO_A:		\
++		__gpio = GPIO_A;		\
++		break;				\
++	case MX25_PAD_GPIO_B__GPIO_B:		\
++		__gpio = GPIO_B;		\
++		break;				\
++	case MX25_PAD_GPIO_C__GPIO_C:		\
++		__gpio = GPIO_C;		\
++		break;				\
++	case MX25_PAD_GPIO_D__GPIO_D:		\
++		__gpio = GPIO_D;		\
++		break;				\
++	case MX25_PAD_GPIO_E__GPIO_E:		\
++		__gpio = GPIO_E;		\
++		break;				\
++	case MX25_PAD_GPIO_F__GPIO_F:		\
++		__gpio = GPIO_F;		\
++		break;				\
++	case MX25_PAD_CSI_D7__GPIO_1_6:		\
++		__gpio = GPIO_1_6;		\
++		break;				\
++	case MX25_PAD_CSI_D8__GPIO_1_7:		\
++		__gpio = GPIO_1_7;		\
++		break;				\
++	case MX25_PAD_CSI_MCLK__GPIO_1_8:	\
++		__gpio = GPIO_1_8;		\
++		break;				\
++	case MX25_PAD_CSI_VSYNC__GPIO_1_9:	\
++		__gpio = GPIO_1_9;		\
++		break;				\
++	case MX25_PAD_CSI_HSYNC__GPIO_1_10:	\
++		__gpio = GPIO_1_10;		\
++		break;				\
++	case MX25_PAD_CSI_PIXCLK__GPIO_1_11:	\
++		__gpio = GPIO_1_11;		\
++		break;				\
++	case MX25_PAD_I2C1_CLK__GPIO_1_12:	\
++		__gpio = GPIO_1_12;		\
++		break;				\
++	case MX25_PAD_I2C1_DAT__GPIO_1_13:	\
++		__gpio = GPIO_1_13;		\
++		break;				\
++	case MX25_PAD_CSPI1_MOSI__GPIO_1_14:	\
++		__gpio = GPIO_1_14;		\
++		break;				\
++	case MX25_PAD_CSPI1_MISO__GPIO_1_15:	\
++		__gpio = GPIO_1_15;		\
++		break;				\
++	case MX25_PAD_CSPI1_SS0__GPIO_1_16:	\
++		__gpio = GPIO_1_16;		\
++		break;				\
++	case MX25_PAD_CSPI1_SS1__GPIO_1_17:	\
++		__gpio = GPIO_1_17;		\
++		break;				\
++	case MX25_PAD_CSPI1_SCLK__GPIO_1_18:	\
++		__gpio = GPIO_1_18;		\
++		break;				\
++	case MX25_PAD_LD5__GPIO_1_19:		\
++		__gpio = GPIO_1_19;		\
++		break;				\
++	case MX25_PAD_LD6__GPIO_1_20:		\
++		__gpio = GPIO_1_20;		\
++		break;				\
++	case MX25_PAD_LD7__GPIO_1_21:		\
++		__gpio = GPIO_1_21;		\
++		break;				\
++	case MX25_PAD_HSYNC__GPIO_1_22:		\
++		__gpio = GPIO_1_22;		\
++		break;				\
++	case MX25_PAD_VSYNC__GPIO_1_23:		\
++		__gpio = GPIO_1_23;		\
++		break;				\
++	case MX25_PAD_LSCLK__GPIO_1_24:		\
++		__gpio = GPIO_1_24;		\
++		break;				\
++	case MX25_PAD_OE_ACD__GPIO_1_25:	\
++		__gpio = GPIO_1_25;		\
++		break;				\
++	case MX25_PAD_PWM__GPIO_1_26:		\
++		__gpio = GPIO_1_26;		\
++		break;				\
++	case MX25_PAD_CSI_D2__GPIO_1_27:	\
++		__gpio = GPIO_1_27;		\
++		break;				\
++	case MX25_PAD_CSI_D3__GPIO_1_28:	\
++		__gpio = GPIO_1_28;		\
++		break;				\
++	case MX25_PAD_CSI_D4__GPIO_1_29:	\
++		__gpio = GPIO_1_29;		\
++		break;				\
++	case MX25_PAD_CSI_D5__GPIO_1_30:	\
++		__gpio = GPIO_1_30;		\
++		break;				\
++	case MX25_PAD_CSI_D6__GPIO_1_31:	\
++		__gpio = GPIO_1_31;		\
++		break;				\
++						\
++	case MX25_PAD_A14__GPIO_2_0:		\
++		__gpio = GPIO_2_0;		\
++		break;				\
++	case MX25_PAD_A15__GPIO_2_1:		\
++		__gpio = GPIO_2_1;		\
++		break;				\
++	case MX25_PAD_A16__GPIO_2_2:		\
++		__gpio = GPIO_2_2;		\
++		break;				\
++	case MX25_PAD_A17__GPIO_2_3:		\
++		__gpio = GPIO_2_3;		\
++		break;				\
++	case MX25_PAD_A18__GPIO_2_4:		\
++		__gpio = GPIO_2_4;		\
++		break;				\
++	case MX25_PAD_A19__GPIO_2_5:		\
++		__gpio = GPIO_2_5;		\
++		break;				\
++	case MX25_PAD_A20__GPIO_2_6:		\
++		__gpio = GPIO_2_6;		\
++		break;				\
++	case MX25_PAD_A21__GPIO_2_7:		\
++		__gpio = GPIO_2_7;		\
++		break;				\
++	case MX25_PAD_A22__GPIO_2_8:		\
++		__gpio = GPIO_2_8;		\
++		break;				\
++	case MX25_PAD_A23__GPIO_2_9:		\
++		__gpio = GPIO_2_9;		\
++		break;				\
++	case MX25_PAD_A24__GPIO_2_10:		\
++		__gpio = GPIO_2_10;		\
++		break;				\
++	case MX25_PAD_A25__GPIO_2_11:		\
++		__gpio = GPIO_2_11;		\
++		break;				\
++	case MX25_PAD_EB0__GPIO_2_12:		\
++		__gpio = GPIO_2_12;		\
++		break;				\
++	case MX25_PAD_EB1__GPIO_2_13:		\
++		__gpio = GPIO_2_13;		\
++		break;				\
++	case MX25_PAD_OE__GPIO_2_14:		\
++		__gpio = GPIO_2_14;		\
++		break;				\
++	case MX25_PAD_LD0__GPIO_2_15:		\
++		__gpio = GPIO_2_15;		\
++		break;				\
++	case MX25_PAD_LD1__GPIO_2_16:		\
++		__gpio = GPIO_2_16;		\
++		break;				\
++	case MX25_PAD_LD2__GPIO_2_17:		\
++		__gpio = GPIO_2_17;		\
++		break;				\
++	case MX25_PAD_LD3__GPIO_2_18:		\
++		__gpio = GPIO_2_18;		\
++		break;				\
++	case MX25_PAD_LD4__GPIO_2_19:		\
++		__gpio = GPIO_2_19;		\
++		break;				\
++	case MX25_PAD_DE_B__GPIO_2_20:		\
++		__gpio = GPIO_2_20;		\
++		break;				\
++	case MX25_PAD_CLKO__GPIO_2_21:		\
++		__gpio = GPIO_2_21;		\
++		break;				\
++	case MX25_PAD_CSPI1_RDY__GPIO_2_22:	\
++		__gpio = GPIO_2_22;		\
++		break;				\
++	case MX25_PAD_SD1_CMD__GPIO_2_23:	\
++		__gpio = GPIO_2_23;		\
++		break;				\
++	case MX25_PAD_SD1_CLK__GPIO_2_24:	\
++		__gpio = GPIO_2_24;		\
++		break;				\
++	case MX25_PAD_SD1_DATA0__GPIO_2_25:	\
++		__gpio = GPIO_2_25;		\
++		break;				\
++	case MX25_PAD_SD1_DATA1__GPIO_2_26:	\
++		__gpio = GPIO_2_26;		\
++		break;				\
++	case MX25_PAD_SD1_DATA2__GPIO_2_27:	\
++		__gpio = GPIO_2_27;		\
++		break;				\
++	case MX25_PAD_SD1_DATA3__GPIO_2_28:	\
++		__gpio = GPIO_2_28;		\
++		break;				\
++	case MX25_PAD_KPP_ROW0__GPIO_2_29:	\
++		__gpio = GPIO_2_29;		\
++		break;				\
++	case MX25_PAD_KPP_ROW1__GPIO_2_30:	\
++		__gpio = GPIO_2_30;		\
++		break;				\
++	case MX25_PAD_KPP_ROW2__GPIO_2_31:	\
++		__gpio = GPIO_2_31;		\
++		break;				\
++						\
++	case MX25_PAD_KPP_ROW3__GPIO_3_0:	\
++		__gpio = GPIO_3_0;		\
++		break;				\
++	case MX25_PAD_KPP_COL0__GPIO_3_1:	\
++		__gpio = GPIO_3_1;		\
++		break;				\
++	case MX25_PAD_KPP_COL1__GPIO_3_2:	\
++		__gpio = GPIO_3_2;		\
++		break;				\
++	case MX25_PAD_KPP_COL2__GPIO_3_3:	\
++		__gpio = GPIO_3_3;		\
++		break;				\
++	case MX25_PAD_KPP_COL3__GPIO_3_4:	\
++		__gpio = GPIO_3_4;		\
++		break;				\
++	case MX25_PAD_FEC_MDC__GPIO_3_5:	\
++		__gpio = GPIO_3_5;		\
++		break;				\
++	case MX25_PAD_FEC_MDIO__GPIO_3_6:	\
++		__gpio = GPIO_3_6;		\
++		break;				\
++	case MX25_PAD_FEC_TDATA0__GPIO_3_7:	\
++		__gpio = GPIO_3_7;		\
++		break;				\
++	case MX25_PAD_FEC_TDATA1__GPIO_3_8:	\
++		__gpio = GPIO_3_8;		\
++		break;				\
++	case MX25_PAD_FEC_TX_EN__GPIO_3_9:	\
++		__gpio = GPIO_3_9;		\
++		break;				\
++	case MX25_PAD_FEC_RDATA0__GPIO_3_10:	\
++		__gpio = GPIO_3_10;		\
++		break;				\
++	case MX25_PAD_FEC_RDATA1__GPIO_3_11:	\
++		__gpio = GPIO_3_11;		\
++		break;				\
++	case MX25_PAD_FEC_RX_DV__GPIO_3_12:	\
++		__gpio = GPIO_3_12;		\
++		break;				\
++	case MX25_PAD_FEC_TX_CLK__GPIO_3_13:	\
++		__gpio = GPIO_3_13;		\
++		break;				\
++	case MX25_PAD_RTCK__GPIO_3_14:		\
++		__gpio = GPIO_3_14;		\
++		break;				\
++	case MX25_PAD_EXT_ARMCLK__GPIO_3_15:	\
++		__gpio = GPIO_3_15;		\
++		break;				\
++	case MX25_PAD_UPLL_BYPCLK__GPIO_3_16:	\
++		__gpio = GPIO_3_16;		\
++		break;				\
++	case MX25_PAD_VSTBY_REQ__GPIO_3_17:	\
++		__gpio = GPIO_3_17;		\
++		break;				\
++	case MX25_PAD_VSTBY_ACK__GPIO_3_18:	\
++		__gpio = GPIO_3_18;		\
++		break;				\
++	case MX25_PAD_POWER_FAIL__GPIO_3_19:	\
++		__gpio = GPIO_3_19;		\
++		break;				\
++	case MX25_PAD_CS4__GPIO_3_20:		\
++		__gpio = GPIO_3_20;		\
++		break;				\
++	case MX25_PAD_CS5__GPIO_3_21:		\
++		__gpio = GPIO_3_21;		\
++		break;				\
++	case MX25_PAD_NF_CE0__GPIO_3_22:	\
++		__gpio = GPIO_3_22;		\
++		break;				\
++	case MX25_PAD_ECB__GPIO_3_23:		\
++		__gpio = GPIO_3_23;		\
++		break;				\
++	case MX25_PAD_LBA__GPIO_3_24:		\
++		__gpio = GPIO_3_24;		\
++		break;				\
++	case MX25_PAD_RW__GPIO_3_25:		\
++		__gpio = GPIO_3_25;		\
++		break;				\
++	case MX25_PAD_NFWE_B__GPIO_3_26:	\
++		__gpio = GPIO_3_26;		\
++		break;				\
++	case MX25_PAD_NFRE_B__GPIO_3_27:	\
++		__gpio = GPIO_3_27;		\
++		break;				\
++	case MX25_PAD_NFALE__GPIO_3_28:		\
++		__gpio = GPIO_3_28;		\
++		break;				\
++	case MX25_PAD_NFCLE__GPIO_3_29:		\
++		__gpio = GPIO_3_29;		\
++		break;				\
++	case MX25_PAD_NFWP_B__GPIO_3_30:	\
++		__gpio = GPIO_3_30;		\
++		break;				\
++	case MX25_PAD_NFRB__GPIO_3_31:		\
++		__gpio = GPIO_3_31;		\
++		break;				\
++						\
++	case MX25_PAD_A10__GPIO_4_0:		\
++		__gpio = GPIO_4_0;		\
++		break;				\
++	case MX25_PAD_A13__GPIO_4_1:		\
++		__gpio = GPIO_4_1;		\
++		break;				\
++	case MX25_PAD_CS0__GPIO_4_2:		\
++		__gpio = GPIO_4_2;		\
++		break;				\
++	case MX25_PAD_CS1__GPIO_4_3:		\
++		__gpio = GPIO_4_3;		\
++		break;				\
++	case MX25_PAD_BCLK__GPIO_4_4:		\
++		__gpio = GPIO_4_4;		\
++		break;				\
++	case MX25_PAD_D15__GPIO_4_5:		\
++		__gpio = GPIO_4_5;		\
++		break;				\
++	case MX25_PAD_D14__GPIO_4_6:		\
++		__gpio = GPIO_4_6;		\
++		break;				\
++	case MX25_PAD_D13__GPIO_4_7:		\
++		__gpio = GPIO_4_7;		\
++		break;				\
++	case MX25_PAD_D12__GPIO_4_8:		\
++		__gpio = GPIO_4_8;		\
++		break;				\
++	case MX25_PAD_D11__GPIO_4_9:		\
++		__gpio = GPIO_4_9;		\
++		break;				\
++	case MX25_PAD_D10__GPIO_4_10:		\
++		__gpio = GPIO_4_10;		\
++		break;				\
++	case MX25_PAD_D9__GPIO_4_11:		\
++		__gpio = GPIO_4_11;		\
++		break;				\
++	case MX25_PAD_D8__GPIO_4_12:		\
++		__gpio = GPIO_4_12;		\
++		break;				\
++	case MX25_PAD_D7__GPIO_4_13:		\
++		__gpio = GPIO_4_13;		\
++		break;				\
++	case MX25_PAD_D6__GPIO_4_14:		\
++		__gpio = GPIO_4_14;		\
++		break;				\
++	case MX25_PAD_D5__GPIO_4_15:		\
++		__gpio = GPIO_4_15;		\
++		break;				\
++	case MX25_PAD_D4__GPIO_4_16:		\
++		__gpio = GPIO_4_16;		\
++		break;				\
++	case MX25_PAD_D3__GPIO_4_17:		\
++		__gpio = GPIO_4_17;		\
++		break;				\
++	case MX25_PAD_D2__GPIO_4_18:		\
++		__gpio = GPIO_4_18;		\
++		break;				\
++	case MX25_PAD_D1__GPIO_4_19:		\
++		__gpio = GPIO_4_19;		\
++		break;				\
++	case MX25_PAD_D0__GPIO_4_20:		\
++		__gpio = GPIO_4_20;		\
++		break;				\
++	case MX25_PAD_CSI_D9__GPIO_4_21:	\
++		__gpio = GPIO_4_21;		\
++		break;				\
++	case MX25_PAD_UART1_RXD__GPIO_4_22:	\
++		__gpio = GPIO_4_22;		\
++		break;				\
++	case MX25_PAD_UART1_TXD__GPIO_4_23:	\
++		__gpio = GPIO_4_23;		\
++		break;				\
++	case MX25_PAD_UART1_RTS__GPIO_4_24:	\
++		__gpio = GPIO_4_24;		\
++		break;				\
++	case MX25_PAD_UART1_CTS__GPIO_4_25:	\
++		__gpio = GPIO_4_25;		\
++		break;				\
++	case MX25_PAD_UART2_RXD__GPIO_4_26:	\
++		__gpio = GPIO_4_26;		\
++		break;				\
++	case MX25_PAD_UART2_TXD__GPIO_4_27:	\
++		__gpio = GPIO_4_27;		\
++		break;				\
++	case MX25_PAD_UART2_RTS__GPIO_4_28:	\
++		__gpio = GPIO_4_28;		\
++		break;				\
++	case MX25_PAD_UART2_CTS__GPIO_4_29:	\
++		__gpio = GPIO_4_29;		\
++		break;				\
++	case MX25_PAD_BOOT_MODE0__GPIO_4_30:	\
++		__gpio = GPIO_4_30;		\
++		break;				\
++	case MX25_PAD_BOOT_MODE1__GPIO_4_31:	\
++		__gpio = GPIO_4_31;		\
++		break;				\
++	}					\
++	__gpio;					\
++})
++#endif
++
++#endif // __ASSEMBLY__
++#endif // __IOMUX_MX25_H__
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-v3.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/iomux-v3.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux-v3.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/iomux-v3.h	2009-06-02 17:05:27.000000000 +0200
+@@ -54,7 +54,7 @@ struct pad_desc {
+ 	unsigned select_input:3;
+ };
+ 
+-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
++#define IOMUX_PAD(_pad, _func, _pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+ 		_select_input, _pad_ctrl)				\
+ 		{							\
+ 			.mux_ctrl_ofs     = _mux_ctrl_ofs,		\
+@@ -68,28 +68,28 @@ struct pad_desc {
+ /*
+  * Use to set PAD control
+  */
+-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
+-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
++#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	(0 << 13)
++#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	(1 << 13)
+ 
+-#define PAD_CTL_NO_HYSTERESIS		0
+-#define PAD_CTL_HYSTERESIS		1
++#define PAD_CTL_NO_HYSTERESIS		(0 << 8)
++#define PAD_CTL_HYSTERESIS		(1 << 8)
+ 
+-#define PAD_CTL_PULL_DISABLED		0x0
+-#define PAD_CTL_PULL_KEEPER		0xa
+-#define PAD_CTL_PULL_DOWN_100K		0xc
+-#define PAD_CTL_PULL_UP_47K		0xd
+-#define PAD_CTL_PULL_UP_100K		0xe
+-#define PAD_CTL_PULL_UP_22K		0xf
+-
+-#define PAD_CTL_OUTPUT_CMOS		0
+-#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+-
+-#define PAD_CTL_DRIVE_STRENGTH_NORM	0
+-#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
+-#define PAD_CTL_DRIVE_STRENGTH_MAX	2
++#define PAD_CTL_PULL_DISABLED		(0x0 << 4)
++#define PAD_CTL_PULL_KEEPER		(0x8 << 4)
++#define PAD_CTL_PULL_DOWN_100K		(0xc << 4)
++#define PAD_CTL_PULL_UP_47K		(0xd << 4)
++#define PAD_CTL_PULL_UP_100K		(0xe << 4)
++#define PAD_CTL_PULL_UP_22K		(0xf << 4)
++
++#define PAD_CTL_OUTPUT_CMOS		(0 << 3)
++#define PAD_CTL_OUTPUT_OPEN_DRAIN	(1 << 3)
++
++#define PAD_CTL_DRIVE_STRENGTH_NORM	(0 << 1)
++#define PAD_CTL_DRIVE_STRENGTH_HIGH	(1 << 1)
++#define PAD_CTL_DRIVE_STRENGTH_MAX	(2 << 1)
+ 
+-#define PAD_CTL_SLEW_RATE_SLOW		0
+-#define PAD_CTL_SLEW_RATE_FAST		1
++#define PAD_CTL_SLEW_RATE_SLOW		(0 << 0)
++#define PAD_CTL_SLEW_RATE_FAST		(1 << 0)
+ 
+ /*
+  * setups a single pad:
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/iomux.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/iomux.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/iomux.h	2009-06-02 17:05:27.000000000 +0200
+@@ -24,10 +24,14 @@
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
++#ifndef CONFIG_MACH_MX25
+ #define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
++#endif
+ #define MXC_DDIR(x)    (0x00 + ((x) << 8))
++#ifndef CONFIG_MACH_MX25
+ #define MXC_OCR1(x)    (0x04 + ((x) << 8))
+ #define MXC_OCR2(x)    (0x08 + ((x) << 8))
++#endif
+ #define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+ #define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+ #define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+@@ -96,16 +100,20 @@
+ 
+ 
+ #ifdef CONFIG_ARCH_MX1
+-#include <mach/iomux-mx1.h>
++# include <mach/iomux-mx1.h>
+ #endif
+ #ifdef CONFIG_ARCH_MX2
+-#include <mach/iomux-mx2x.h>
+-#ifdef CONFIG_MACH_MX21
+-#include <mach/iomux-mx21.h>
+-#endif
+-#ifdef CONFIG_MACH_MX27
+-#include <mach/iomux-mx27.h>
+-#endif
++# ifndef CONFIG_MACH_MX25
++#  include <mach/iomux-mx2x.h>
++#  ifdef CONFIG_MACH_MX21
++#   include <mach/iomux-mx21.h>
++#  endif
++# endif
++# ifdef CONFIG_MACH_MX27
++#  include <mach/iomux-mx27.h>
++# else
++#  include <mach/iomux-mx25.h>
++# endif
+ #endif
+ 
+ 
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/irqs.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/irqs.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/irqs.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/irqs.h	2009-06-02 17:05:27.000000000 +0200
+@@ -21,7 +21,11 @@
+ #if defined CONFIG_ARCH_MX1
+ #define MXC_GPIO_IRQS		(32 * 4)
+ #elif defined CONFIG_ARCH_MX2
++#ifndef CONFIG_MACH_MX25
+ #define MXC_GPIO_IRQS		(32 * 6)
++#else
++#define MXC_GPIO_IRQS		(32 * 4)
++#endif
+ #elif defined CONFIG_ARCH_MX3
+ #define MXC_GPIO_IRQS		(32 * 3)
+ #endif
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/memory.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/memory.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/memory.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/memory.h	2009-06-02 17:05:27.000000000 +0200
+@@ -14,12 +14,13 @@
+ #if defined CONFIG_ARCH_MX1
+ #define PHYS_OFFSET		UL(0x08000000)
+ #elif defined CONFIG_ARCH_MX2
+-#ifdef CONFIG_MACH_MX21
++# if defined(CONFIG_MACH_MX21)
+ #define PHYS_OFFSET		UL(0xC0000000)
+-#endif
+-#ifdef CONFIG_MACH_MX27
++# elif defined(CONFIG_MACH_MX27)
+ #define PHYS_OFFSET		UL(0xA0000000)
+-#endif
++# elif defined(CONFIG_MACH_MX25)
++#define PHYS_OFFSET		UL(0x80000000)
++# endif
+ #elif defined CONFIG_ARCH_MX3
+ #define PHYS_OFFSET		UL(0x80000000)
+ #endif
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mx25.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/mx25.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mx25.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/mx25.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,482 @@
++/*
++ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/*!
++ * @file arch-mxc/mx25.h
++ * @brief This file contains register definitions.
++ *
++ * @ingroup MSL_MX25
++ */
++
++#ifndef __ASM_ARCH_MXC_MX25_H__
++#define __ASM_ARCH_MXC_MX25_H__
++
++#ifndef __ASM_ARCH_MXC_HARDWARE_H__
++#error "Do not include directly."
++#endif
++
++#ifdef CONFIG_DEBUG_LL
++#ifdef CONFIG_MACH_TX25
++#include <mach/board-tx25.h>
++#endif
++#endif // CONFIG_DEBUG_LL
++
++/*
++ * MX25 memory map:
++ *
++ * Virt     Phys        Size    What
++ * ---------------------------------------------------------------------------
++ * FC000000 43F00000    1M      AIPS 1
++ * FC100000 50000000    1M      SPBA
++ * FC200000 53F00000    1M      AIPS 2
++ * FC300000 60000000    1M      ROMPATCH (128M)
++ * FC400000 68000000    1M      ASIC (128M)
++ * FC500000 78000000    128K    FBC RAM (IRAM)
++ *          80000000    256M    SDRAM0
++ *          90000000    256M    SDRAM1
++ *          A0000000    128M    CS0 Flash
++ *          A8000000    128M    CS1 Flash
++ *          B0000000    32M     CS2 SRAM
++ *          B2000000    32M     CS3
++ *          B4000000    32M     CS4
++ *          B6000000    32M     CS5
++ * FC520000 B8000000    64K     SDRAM, WEIM, M3IF, EMI controllers
++ * FC530000 BB000000    8K      NFC
++ */
++
++#include <asm/memory.h>
++#define VA(x) _AT(void __force __iomem *,x)
++
++/*
++ * IRAM
++ */
++#define IRAM_BASE_ADDR		UL(0x78000000)	/* internal ram */
++#define IRAM_BASE_ADDR_VIRT	VA(0xFC500000)
++#define IRAM_SIZE		SZ_128K
++
++/*
++ * AIPS 1
++ */
++#define AIPS1_BASE_ADDR		UL(0x43F00000)
++#define AIPS1_BASE_ADDR_VIRT	VA(0xFC000000)
++#define AIPS1_SIZE		SZ_1M
++
++#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
++#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
++#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
++#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
++#define AAPE_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00014000)
++#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
++#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
++#define CAN1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
++#define CAN3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
++#define UART1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00090000)
++#define UART2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00094000)
++#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
++#define OWIRE_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0009C000)
++#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
++#define CSPI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A4000)
++#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
++#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
++#define AUDMUX_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B0000)
++#define ECT_A_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000B8000)
++#define ECT_B_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000BC000)
++
++/*
++ * SPBA global module enabled #0
++ */
++#define SPBA0_BASE_ADDR		UL(0x50000000)
++#define SPBA0_BASE_ADDR_VIRT	VA(0xFC100000)
++#define SPBA0_SIZE		SZ_1M
++
++#define CSPI3_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00004000)
++#define UART4_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00008000)
++#define UART3_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0000C000)
++#define CSPI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00010000)
++#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
++#define ESAI_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
++#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
++#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
++#define SIM2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00028000)
++#define UART5_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0002C000)
++#define TSC_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00030000)
++#define SSI1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00034000)
++#define FEC_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00038000)
++#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
++
++/*!
++ * defines for SPBA modules
++ */
++#define SPBA_CSPI3		(0x1 << 2)
++#define SPBA_UART4		(0x2 << 2)
++#define SPBA_UART3		(0x3 << 2)
++#define SPBA_CSPI2		(0x4 << 2)
++#define SPBA_SSI2		(0x5 << 2)
++#define SPBA_ESAI		(0x6 << 2)
++#define SPBA_ATA		(0x8 << 2)
++#define SPBA_SIM1		(0x9 << 2)
++#define SPBA_SIM2		(0xA << 2)
++#define SPBA_UART5		(0xB << 2)
++#define SPBA_ANALOG		(0xC << 2)
++#define SPBA_SSI1		(0xD << 2)
++#define SPBA_FEC		(0xE << 2)
++
++/*!
++ * Defines for modules using static and dynamic DMA channels
++ */
++#define MXC_DMA_CHANNEL_IRAM		30
++#define MXC_DMA_CHANNEL_UART1_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART1_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART2_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART2_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART3_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART3_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART4_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART4_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART5_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_UART5_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_MMC1		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_SSI1_RX		MXC_DMA_DYNAMIC_CHANNEL
++#ifdef CONFIG_SDMA_IRAM
++#define MXC_DMA_CHANNEL_SSI1_TX		(MXC_DMA_CHANNEL_IRAM + 1)
++#else
++#define MXC_DMA_CHANNEL_SSI1_TX		MXC_DMA_DYNAMIC_CHANNEL
++#endif
++#define MXC_DMA_CHANNEL_SSI2_RX		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_SSI2_TX		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_CSPI1_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_CSPI1_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_CSPI2_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_CSPI2_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_CSPI3_RX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_CSPI3_TX	MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_ATA_RX		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_ATA_TX		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_MEMORY		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_ESAI_RX		MXC_DMA_DYNAMIC_CHANNEL
++#define MXC_DMA_CHANNEL_ESAI_TX		MXC_DMA_DYNAMIC_CHANNEL
++
++/*
++ * AIPS 2
++ */
++#define AIPS2_BASE_ADDR			UL(0x53F00000)
++#define AIPS2_BASE_ADDR_VIRT		VA(0xFC200000)
++#define AIPS2_SIZE			SZ_1M
++
++#define CCM_BASE_ADDR			(AIPS2_BASE_ADDR + 0x00080000)
++#define GPT4_BASE_ADDR			(AIPS2_BASE_ADDR + 0x00084000)
++#define GPT3_BASE_ADDR			(AIPS2_BASE_ADDR + 0x00088000)
++#define GPT2_BASE_ADDR			(AIPS2_BASE_ADDR + 0x0008C000)
++#define GPT1_BASE_ADDR			(AIPS2_BASE_ADDR + 0x00090000)
++#define EPIT1_BASE_ADDR			(AIPS2_BASE_ADDR + 0x00094000)
++#define EPIT2_BASE_ADDR			(AIPS2_BASE_ADDR + 0x00098000)
++#define GPIO4_BASE_ADDR			(AIPS2_BASE_ADDR + 0x0009C000)
++#define PWM2_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000A0000)
++#define GPIO3_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000A4000)
++#define PWM3_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000A8000)
++#define SCC_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000AC000)
++#define RNGD_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000B0000)
++#define MMC_SDHC1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B4000)
++#define MMC_SDHC2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B8000)
++#define LCDC_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000BC000)
++#define SLCDC_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000C0000)
++#define PWM4_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000C8000)
++#define GPIO1_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000CC000)
++#define GPIO2_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000D0000)
++#define SDMA_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000D4000)
++#define WDOG_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000DC000)
++#define PWM1_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000E0000)
++#define RTIC_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000EC000)
++#define IIM_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000F0000)
++#define USBOTG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000F4000)
++#define OTG_BASE_ADDR			USBOTG_BASE_ADDR
++#define CSI_BASE_ADDR			(AIPS2_BASE_ADDR + 0x000F8000)
++#define DRYICE_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000FC000)
++
++/*
++ * ROMP and ASIC
++ */
++#define ROMP_BASE_ADDR			UL(0x60000000)
++#define ROMP_BASE_ADDR_VIRT		VA(0xFC300000)
++#define ROMP_SIZE			SZ_1M
++
++#define ASIC_BASE_ADDR			UL(0x68000000)
++#define ASIC_BASE_ADDR_VIRT		VA(0xFC400000)
++#define ASIC_SIZE			SZ_1M
++#define AVIC_BASE_ADDR			ASIC_BASE_ADDR
++#define AVIC_BASE_ADDR_VIRT		ASIC_BASE_ADDR_VIRT
++#define AVIC_SIZE			ASIC_SIZE
++
++/*
++ * SDRAM, WEIM, M3IF, EMI controllers
++ */
++#define X_MEMC_BASE_ADDR		UL(0xB8000000)
++#define X_MEMC_BASE_ADDR_VIRT		VA(0xFC520000)
++#define X_MEMC_SIZE			SZ_64K
++
++#define SDRAMC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x1000)
++#define WEIM_BASE_ADDR			(X_MEMC_BASE_ADDR + 0x2000)
++#define M3IF_BASE_ADDR			(X_MEMC_BASE_ADDR + 0x3000)
++#define EMI_CTL_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x4000)
++
++/*
++ * NFC controller
++ */
++#define NFC_BASE_ADDR			UL(0xBB000000)
++#define NFC_BASE_ADDR_VIRT		VA(0xFC530000)
++#define NFC_SIZE			SZ_8K
++
++/*
++ * Memory regions and CS
++ */
++#define CSD0_BASE_ADDR			UL(0x80000000)
++#define CSD1_BASE_ADDR			UL(0x90000000)
++
++#define SDRAM_BASE_ADDR			CSD0_BASE_ADDR
++
++#define CS0_BASE_ADDR			UL(0xA0000000)
++#define CS1_BASE_ADDR			UL(0xA8000000)
++#define CS2_BASE_ADDR			UL(0xB0000000)
++#define CS3_BASE_ADDR			UL(0xB2000000)
++#define CS4_BASE_ADDR			UL(0xB4000000)
++#define CS4_SIZE			SZ_32M
++#define CS5_BASE_ADDR			UL(0xB6000000)
++#define CS5_SIZE			SZ_32M
++
++/*!
++ * This macro defines the physical to virtual address mapping for all the
++ * peripheral modules. It is used by passing in the physical address as x
++ * and returning the virtual address. If the physical address is not mapped,
++ * it returns 0
++ */
++#define IO_ADDRESS(x)											\
++	VA((((x) >= AIPS1_BASE_ADDR) && ((x) < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):	\
++	(((x) >= SPBA0_BASE_ADDR) && ((x) < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):	\
++	(((x) >= AIPS2_BASE_ADDR) && ((x) < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):	\
++	(((x) >= ROMP_BASE_ADDR) && ((x) < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):		\
++	(((x) >= ASIC_BASE_ADDR) && ((x) < (ASIC_BASE_ADDR + AVIC_SIZE))) ? ASIC_IO_ADDRESS(x):		\
++	(((x) >= IRAM_BASE_ADDR) && ((x) < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):		\
++	(((x) >= X_MEMC_BASE_ADDR) && ((x) < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):	\
++	(((x) >= NFC_BASE_ADDR) && ((x) < (NFC_BASE_ADDR + NFC_SIZE))) ? NFC_IO_ADDRESS(x):		\
++	0)
++
++#define MXC_VADDR_RANGE(v,n)				\
++	(((v)) >= n##_BASE_ADDR_VIRT) &&		\
++	(((v)) < n##_BASE_ADDR_VIRT + n##_SIZE) ?	\
++	((v)-n##_BASE_ADDR_VIRT + n##_BASE_ADDR) :
++
++#define MXC_PHYS_ADDRESS(v)			\
++	UL(MXC_VADDR_RANGE(v,AIPS1)		\
++	MXC_VADDR_RANGE(v,AIPS2)		\
++	MXC_VADDR_RANGE(v,SPBA0)		\
++	MXC_VADDR_RANGE(v,ROMP)			\
++	MXC_VADDR_RANGE(v,ASIC)			\
++	MXC_VADDR_RANGE(v,IRAM)			\
++	MXC_VADDR_RANGE(v,X_MEMC)		\
++	MXC_VADDR_RANGE(v,NFC)			\
++	0)
++
++#define GPIO_BASE_ADDR(port)				\
++	((port == 1 ? GPIO1_BASE_ADDR :			\
++	  (port == 2 ? GPIO2_BASE_ADDR :		\
++	   (port == 3 ? GPIO3_BASE_ADDR :		\
++	    (port == 4 ? GPIO4_BASE_ADDR : 0)))))
++
++/*
++ * define the address mapping macros: in physical address order
++ */
++
++#define AIPS1_IO_ADDRESS(x)  \
++	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
++
++#define SPBA0_IO_ADDRESS(x)  \
++	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
++
++#define AIPS2_IO_ADDRESS(x)  \
++	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
++
++#define ROMP_IO_ADDRESS(x)  \
++	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
++
++#define ASIC_IO_ADDRESS(x)  \
++	(((x) - ASIC_BASE_ADDR) + ASIC_BASE_ADDR_VIRT)
++
++/* for entry-macro.S */
++#define AVIC_IO_ADDRESS(x)	ASIC_IO_ADDRESS(x)
++
++#define IRAM_IO_ADDRESS(x)  \
++	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
++
++#define X_MEMC_IO_ADDRESS(x)  \
++	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
++
++#define NFC_IO_ADDRESS(x)  \
++	(((x) - NFC_BASE_ADDR) + NFC_BASE_ADDR_VIRT)
++
++/*
++ * DMA request assignments
++ */
++#define DMA_REQ_EXTREQ0			 0
++#define DMA_REQ_CCM			 1
++#define DMA_REQ_ATA_TX_END		 2
++#define DMA_REQ_ATA_TX			 3
++#define DMA_REQ_ATA_RX			 4
++#define DMA_REQ_CSPI2_RX		 6
++#define DMA_REQ_CSPI2_TX		 7
++#define DMA_REQ_CSPI1_RX		 8
++#define DMA_REQ_CSPI1_TX		 9
++#define DMA_REQ_UART3_RX		10
++#define DMA_REQ_UART3_TX		11
++#define DMA_REQ_UART4_RX		12
++#define DMA_REQ_UART4_TX		13
++#define DMA_REQ_EXTREQ1			14
++#define DMA_REQ_EXTREQ2			15
++#define DMA_REQ_UART2_RX		16
++#define DMA_REQ_UART2_TX		17
++#define DMA_REQ_UART1_RX		18
++#define DMA_REQ_UART1_TX		19
++#define DMA_REQ_SSI2_RX1		22
++#define DMA_REQ_SSI2_TX1		23
++#define DMA_REQ_SSI2_RX0		24
++#define DMA_REQ_SSI2_TX0		25
++#define DMA_REQ_SSI1_RX1		26
++#define DMA_REQ_SSI1_TX1		27
++#define DMA_REQ_SSI1_RX0		28
++#define DMA_REQ_SSI1_TX0		29
++#define DMA_REQ_NFC			30
++#define DMA_REQ_ECT			31
++#define DMA_REQ_ESAI_RX			32
++#define DMA_REQ_ESAI_TX			33
++#define DMA_REQ_CSPI3_RX		34
++#define DMA_REQ_CSPI3_TX		35
++#define DMA_REQ_SIM2_RX			36
++#define DMA_REQ_SIM2_TX			37
++#define DMA_REQ_SIM1_RX			38
++#define DMA_REQ_SIM1_TX			39
++#define DMA_REQ_TSC_GCQ			44
++#define DMA_REQ_TSC_TCQ			45
++#define DMA_REQ_UART5_RX		46
++#define DMA_REQ_UART5_TX		47
++
++/*
++ *  Interrupt numbers
++ */
++#define MXC_INT_CSPI3			 0
++#define MXC_INT_GPT4			 1
++#define MXC_INT_OWIRE			 2
++#define MXC_INT_I2C			 3
++#define MXC_INT_I2C2			 4
++#define MXC_INT_UART4			 5
++#define MXC_INT_RTIC			 6
++#define MXC_INT_ESAI			 7
++#define MXC_INT_SDHC2			 8
++#define MXC_INT_SDHC1			 9
++#define MXC_INT_I2C3			10
++#define MXC_INT_SSI2			11
++#define MXC_INT_SSI1			12
++#define MXC_INT_CSPI2			13
++#define MXC_INT_CSPI1			14
++#define MXC_INT_ATA			15
++#define MXC_INT_GPIO3			16
++#define MXC_INT_CSI			17
++#define MXC_INT_UART3			18
++#define MXC_INT_IIM			19
++#define MXC_INT_SIM1			20
++#define MXC_INT_SIM2			21
++#define MXC_INT_RNGD			22
++#define MXC_INT_GPIO4			23
++#define MXC_INT_KPP			24
++#define MXC_INT_DRYICE_RTC		25
++#define MXC_INT_PWM			26
++#define MXC_INT_EPIT2			27
++#define MXC_INT_EPIT1			28
++#define MXC_INT_GPT3			29
++#define MXC_INT_POWER_FAIL		30
++#define MXC_INT_CRM			31
++#define MXC_INT_UART2			32
++#define MXC_INT_NANDFC			33
++#define MXC_INT_SDMA			34
++#define MXC_INT_USB_HTG			35
++#define MXC_INT_PWM2			36
++#define MXC_INT_USB_OTG			37
++#define MXC_INT_SLCDC			38
++#define MXC_INT_LCDC			39
++#define MXC_INT_UART5			40
++#define MXC_INT_PWM3			41
++#define MXC_INT_PWM4			42
++#define MXC_INT_CAN1			43
++#define MXC_INT_CAN2			44
++#define MXC_INT_UART1			45
++#define MXC_INT_TSC			46
++#define MXC_INT_ECT			48
++#define MXC_INT_SCC_SCM			49
++#define MXC_INT_SCC_SMN			50
++#define MXC_INT_GPIO2			51
++#define MXC_INT_GPIO1			52
++#define MXC_INT_GPT2			53
++#define MXC_INT_GPT1			54
++#define MXC_INT_WDOG			55
++#define MXC_INT_DRYICE			56
++#define MXC_INT_FEC			57
++#define MXC_INT_EXT_INT5		58
++#define MXC_INT_EXT_INT4		59
++#define MXC_INT_EXT_INT3		60
++#define MXC_INT_EXT_INT2		61
++#define MXC_INT_EXT_INT1		62
++#define MXC_INT_EXT_INT0		63
++
++#define MXC_INT_GPT			MXC_INT_GPT1
++
++/* silicon revisions specific to i.MX25 */
++#define CHIP_REV_1_0			0x00
++#define CHIP_REV_1_1			0x01
++
++/* gpio and gpio based interrupt handling */
++#define GPIO_DR				0x00
++#define GPIO_GDIR			0x04
++#define GPIO_PSR			0x08
++#define GPIO_ICR1			0x0C
++#define GPIO_ICR2			0x10
++#define GPIO_IMR			0x14
++#define GPIO_ISR			0x18
++#define GPIO_INT_LOW_LEV		0x0
++#define GPIO_INT_HIGH_LEV		0x1
++#define GPIO_INT_RISE_EDGE		0x2
++#define GPIO_INT_FALL_EDGE		0x3
++#define GPIO_INT_NONE			0x4
++
++/* Mandatory defines used globally */
++
++/* this CPU supports up to 96 GPIOs */
++#define ARCH_NR_GPIOS			128
++
++#define MXC_TIMER_GPT1			1
++#define MXC_TIMER_GPT2			2
++#define MXC_TIMER_GPT3			3
++#define MXC_TIMER_GPT4			4
++
++/*!
++ * NFMS bit in RCSR register for pagesize of nandflash
++ */
++#define NFMS_REG			IO_ADDRESS(CCM_BASE_ADDR + 0x28)
++#define NFMS_NF_DWIDTH			14
++#define NFMS_NF_PG_SZ			8
++
++#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
++#include <linux/io.h>
++
++extern int mx25_revision(void);
++
++#endif
++
++#endif /* __ASM_ARCH_MXC_MX25_H__ */
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mx2x.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/mx2x.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mx2x.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/mx2x.h	2009-06-02 17:05:27.000000000 +0200
+@@ -79,7 +79,7 @@
+  * This macro defines the physical to virtual address mapping for all the
+  * peripheral modules. It is used by passing in the physical address as x
+  * and returning the virtual address. If the physical address is not mapped,
+- * it returns 0xDEADBEEF
++ * it returns 0
+  */
+ #define IO_ADDRESS(x)   \
+ 	(void __force __iomem *) \
+@@ -88,7 +88,7 @@
+ 	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+ 		SAHB1_IO_ADDRESS(x) : \
+ 	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+-		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
++		X_MEMC_IO_ADDRESS(x) : 0)
+ 
+ /* define the address mapping macros: in physical address order */
+ #define AIPI_IO_ADDRESS(x)  \
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mxc.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/mxc.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/mxc.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/mxc.h	2009-06-02 17:05:27.000000000 +0200
+@@ -27,6 +27,7 @@
+ #define MXC_CPU_MX1		1
+ #define MXC_CPU_MX21		21
+ #define MXC_CPU_MX27		27
++#define MXC_CPU_MX25		25
+ #define MXC_CPU_MX31		31
+ #define MXC_CPU_MX35		35
+ 
+@@ -70,6 +71,18 @@ extern unsigned int __mxc_cpu_type;
+ # define cpu_is_mx27()		(0)
+ #endif
+ 
++#ifdef CONFIG_MACH_MX25
++# ifdef mxc_cpu_type
++#  undef mxc_cpu_type
++#  define mxc_cpu_type __mxc_cpu_type
++# else
++#  define mxc_cpu_type MXC_CPU_MX25
++# endif
++# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
++#else
++# define cpu_is_mx25()		(0)
++#endif
++
+ #ifdef CONFIG_ARCH_MX31
+ # ifdef mxc_cpu_type
+ #  undef mxc_cpu_type
+@@ -101,6 +114,6 @@ extern unsigned int __mxc_cpu_type;
+ #endif
+ 
+ #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+-#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
++#define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx25() || cpu_is_mx27())
+ 
+ #endif /*  __ASM_ARCH_MXC_H__ */
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/sdma.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/sdma.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/sdma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/sdma.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,504 @@
++
++/*
++ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#ifndef __ASM_ARCH_MXC_SDMA_H__
++#define __ASM_ARCH_MXC_SDMA_H__
++
++/*!
++ * @defgroup SDMA Smart Direct Memory Access (SDMA) Driver
++ */
++
++/*!
++ * @file arch-mxc/sdma.h
++ *
++ * @brief This file contains the SDMA API declarations.
++ *
++ * SDMA is responsible on moving data between peripherals and memories (MCU, EMI and DSP).
++ *
++ * @ingroup SDMA
++ */
++
++#include <stdarg.h>
++#include <linux/interrupt.h>
++#include <mach/dma.h>
++#include <mach/hardware.h>
++
++/*!
++ * This defines maximum DMA address
++ */
++#define MAX_DMA_ADDRESS 0xffffffff
++
++/*!
++ * This defines maximum number of DMA channels
++ */
++#ifdef CONFIG_MXC_SDMA_API
++#define MAX_DMA_CHANNELS 32
++#define MAX_BD_NUMBER    16
++#define MXC_SDMA_DEFAULT_PRIORITY 1
++#define MXC_SDMA_MIN_PRIORITY 1
++#define MXC_SDMA_MAX_PRIORITY 7
++#else
++#define MAX_DMA_CHANNELS 0
++#endif
++
++#define MXC_FIFO_MEM_DEST_FIXED   0x1
++#define MXC_FIFO_MEM_SRC_FIXED    0x2
++/*!
++ * This enumerates  transfer types
++ */
++typedef enum {
++	emi_2_per = 0,		/*!< EMI memory to peripheral */
++	emi_2_int,		/*!< EMI memory to internal RAM */
++	emi_2_emi,		/*!< EMI memory to EMI memory */
++	emi_2_dsp,		/*!< EMI memory to DSP memory */
++	per_2_int,		/*!< Peripheral to internal RAM */
++	per_2_emi,		/*!< Peripheral to internal EMI memory */
++	per_2_dsp,		/*!< Peripheral to DSP memory */
++	per_2_per,		/*!< Peripheral to Peripheral */
++	int_2_per,		/*!< Internal RAM to peripheral */
++	int_2_int,		/*!< Internal RAM to Internal RAM */
++	int_2_emi,		/*!< Internal RAM to EMI memory */
++	int_2_dsp,		/*!< Internal RAM to DSP memory */
++	dsp_2_per,		/*!< DSP memory to peripheral */
++	dsp_2_int,		/*!< DSP memory to internal RAM */
++	dsp_2_emi,		/*!< DSP memory to EMI memory */
++	dsp_2_dsp,		/*!< DSP memory to DSP memory */
++	emi_2_dsp_loop,		/*!< EMI memory to DSP memory loopback */
++	dsp_2_emi_loop,		/*!< DSP memory to EMI memory loopback */
++	dvfs_pll,		/*!< DVFS script with PLL change       */
++	dvfs_pdr		/*!< DVFS script without PLL change    */
++} sdma_transferT;
++
++/*!
++ * This enumerates peripheral types
++ */
++typedef enum {
++	SSI,			/*!< MCU domain SSI */
++	SSI_SP,			/*!< Shared SSI */
++	MMC,			/*!< MMC */
++	SDHC,			/*!< SDHC */
++	UART,			/*!< MCU domain UART */
++	UART_SP,		/*!< Shared UART */
++	FIRI,			/*!< FIRI */
++	CSPI,			/*!< MCU domain CSPI */
++	CSPI_SP,		/*!< Shared CSPI */
++	SIM,			/*!< SIM */
++	ATA,			/*!< ATA */
++	CCM,			/*!< CCM */
++	EXT,			/*!< External peripheral */
++	MSHC,			/*!< Memory Stick Host Controller */
++	MSHC_SP,		/*!< Shared Memory Stick Host Controller */
++	DSP,			/*!< DSP */
++	MEMORY,			/*!< Memory */
++	FIFO_MEMORY,		/*!< FIFO type Memory */
++	SPDIF,			/*!< SPDIF */
++	IPU_MEMORY,		/*!< IPU Memory */
++	ASRC,			/*!< ASRC */
++	ESAI,			/*!< ESAI */
++} sdma_periphT;
++
++#ifndef TRANSFER_32BIT
++/*!
++ * This defines SDMA access data size
++ */
++#define TRANSFER_32BIT      0x00
++#define TRANSFER_8BIT       0x01
++#define TRANSFER_16BIT      0x02
++#define TRANSFER_24BIT      0x03
++
++#endif
++
++/*!
++ * This defines maximum device name length passed during mxc_request_dma().
++ */
++#define MAX_DEVNAME_LENGTH 32
++
++/*!
++ * This defines SDMA interrupt callback function prototype.
++ */
++typedef void (*dma_callback_t) (void *arg);
++
++/*!
++ * Structure containing sdma channel parameters.
++ */
++typedef struct {
++	__u32 watermark_level;	/*!< Lower/upper threshold that
++				 *   triggers SDMA event
++				 */
++	__u32 per_address;	/*!< Peripheral source/destination
++				 *   physical address
++				 */
++	sdma_periphT peripheral_type;	/*!< Peripheral type */
++	sdma_transferT transfer_type;	/*!< Transfer type   */
++	int event_id;		/*!< Event number,
++				 *   needed by all channels
++				 *   that started by peripherals dma
++				 *   request (per_2_*,*_2_per)
++				 *   Not used for memory and DSP
++				 *   transfers.
++				 */
++	int event_id2;		/*!< Second event number,
++				 *   used in ATA scripts only.
++				 */
++	int bd_number;		/*!< Buffer descriptors number.
++				 *   If not set, single buffer
++				 *   descriptor will be used.
++				 */
++	dma_callback_t callback;	/*!   callback function            */
++	void *arg;		/*!   callback argument            */
++	unsigned long word_size:8;	/*!< SDMA data access word size    */
++} dma_channel_params;
++
++/*!
++ * Structure containing sdma request  parameters.
++ */
++typedef struct {
++	/*!   physical source memory address        */
++	__u8 *sourceAddr;
++	/*!   physical destination memory address   */
++	__u8 *destAddr;
++	/*!   amount of data to transfer,
++	 * updated during mxc_dma_get_config
++	 */
++	__u16 count;
++	/*!< DONE bit of the buffer descriptor,
++	 * updated during mxc_dma_get_config
++	 * 0 - means the BD is done and closed by SDMA
++	 * 1 - means the BD is still being processed by SDMA
++	 */
++	int bd_done;
++	/*!< CONT bit of the buffer descriptor,
++	 * set it if full multi-buffer descriptor mechanism
++	 * required.
++	 */
++	int bd_cont;
++	/*!< ERROR bit of the buffer descriptor,
++	 * updated during mxc_dma_get_config.
++	 * If it is set - there was an error during BD processing.
++	 */
++	int bd_error;
++} dma_request_t;
++
++/*!
++ * Structure containing sdma request  parameters.
++ */
++typedef struct {
++	/*! address of ap_2_ap script */
++	int mxc_sdma_ap_2_ap_addr;
++	/*! address of ap_2_bp script */
++	int mxc_sdma_ap_2_bp_addr;
++	/*! address of ap_2_ap_fixed script */
++	int mxc_sdma_ap_2_ap_fixed_addr;
++	/*! address of bp_2_ap script */
++	int mxc_sdma_bp_2_ap_addr;
++	/*! address of loopback_on_dsp_side script */
++	int mxc_sdma_loopback_on_dsp_side_addr;
++	/*! address of mcu_interrupt_only script */
++	int mxc_sdma_mcu_interrupt_only_addr;
++
++	/*! address of firi_2_per script */
++	int mxc_sdma_firi_2_per_addr;
++	/*! address of firi_2_mcu script */
++	int mxc_sdma_firi_2_mcu_addr;
++	/*! address of per_2_firi script */
++	int mxc_sdma_per_2_firi_addr;
++	/*! address of mcu_2_firi script */
++	int mxc_sdma_mcu_2_firi_addr;
++
++	/*! address of uart_2_per script */
++	int mxc_sdma_uart_2_per_addr;
++	/*! address of uart_2_mcu script */
++	int mxc_sdma_uart_2_mcu_addr;
++	/*! address of per_2_app script */
++	int mxc_sdma_per_2_app_addr;
++	/*! address of mcu_2_app script */
++	int mxc_sdma_mcu_2_app_addr;
++	/*! address of per_2_per script */
++	int mxc_sdma_per_2_per_addr;
++
++	/*! address of uartsh_2_per script */
++	int mxc_sdma_uartsh_2_per_addr;
++	/*! address of uartsh_2_mcu script */
++	int mxc_sdma_uartsh_2_mcu_addr;
++	/*! address of per_2_shp script */
++	int mxc_sdma_per_2_shp_addr;
++	/*! address of mcu_2_shp script */
++	int mxc_sdma_mcu_2_shp_addr;
++
++	/*! address of ata_2_mcu script */
++	int mxc_sdma_ata_2_mcu_addr;
++	/*! address of mcu_2_ata script */
++	int mxc_sdma_mcu_2_ata_addr;
++
++	/*! address of app_2_per script */
++	int mxc_sdma_app_2_per_addr;
++	/*! address of app_2_mcu script */
++	int mxc_sdma_app_2_mcu_addr;
++	/*! address of shp_2_per script */
++	int mxc_sdma_shp_2_per_addr;
++	/*! address of shp_2_mcu script */
++	int mxc_sdma_shp_2_mcu_addr;
++
++	/*! address of mshc_2_mcu script */
++	int mxc_sdma_mshc_2_mcu_addr;
++	/*! address of mcu_2_mshc script */
++	int mxc_sdma_mcu_2_mshc_addr;
++
++	/*! address of spdif_2_mcu script */
++	int mxc_sdma_spdif_2_mcu_addr;
++	/*! address of mcu_2_spdif script */
++	int mxc_sdma_mcu_2_spdif_addr;
++
++	/*! address of asrc_2_mcu script */
++	int mxc_sdma_asrc_2_mcu_addr;
++
++	/*! address of ext_mem_2_ipu script */
++	int mxc_sdma_ext_mem_2_ipu_addr;
++
++	/*! address of descrambler script */
++	int mxc_sdma_descrambler_addr;
++
++	/*! address of dptc_dvfs script */
++	int mxc_sdma_dptc_dvfs_addr;
++
++	int mxc_sdma_utra_addr;
++
++	/*! address where ram code starts */
++	int mxc_sdma_ram_code_start_addr;
++	/*! size of the ram code */
++	int mxc_sdma_ram_code_size;
++	/*! RAM image address */
++	unsigned short *mxc_sdma_start_addr;
++} sdma_script_start_addrs;
++
++/*! Structure to store the initialized dma_channel parameters */
++typedef struct mxc_sdma_channel_params {
++	/*! Channel params */
++	dma_channel_params chnl_params;
++	/*! Channel type (static channel number or dynamic channel) */
++	unsigned int channel_num;
++	/*! Channel priority [0x1(lowest) - 0x7(highest)] */
++	unsigned int chnl_priority;
++} mxc_sdma_channel_params_t;
++
++/*! Private SDMA data structure */
++typedef struct mxc_dma_channel_private {
++	/*! ID of the buffer that was processed */
++	unsigned int buf_tail;
++	/*! Tasklet for the channel */
++	struct tasklet_struct chnl_tasklet;
++	/*! Flag indicates if interrupt is required after every BD transfer */
++	int intr_after_every_bd;
++} mxc_dma_channel_private_t;
++
++/*!
++ * Setup channel according to parameters.
++ * Must be called once after mxc_request_dma()
++ *
++ * @param   channel           channel number
++ * @param   p                 channel parameters pointer
++ * @return  0 on success, error code on fail
++ */
++int mxc_dma_setup_channel(int channel, dma_channel_params * p);
++
++/*!
++ * Setup the channel priority. This can be used to change the default priority
++ * for the channel.
++ *
++ * @param   channel           channel number
++ * @param   priority          priority to be set for the channel
++ *
++ * @return  0 on success, error code on failure
++ */
++int mxc_dma_set_channel_priority(unsigned int channel, unsigned int priority);
++
++/*!
++ * Allocates dma channel.
++ * If channel's value is 0, then the function allocates a free channel
++ * dynamically and sets its value to channel.
++ * Else allocates requested channel if it is free.
++ * If the channel is busy or no free channels (in dynamic allocation) -EBUSY returned.
++ *
++ * @param   channel           pointer to channel number
++ * @param   devicename        device name
++ * @return  0 on success, error code on fail
++ */
++int mxc_request_dma(int *channel, const char *devicename);
++
++/*!
++ * Configures request parameters. Can be called multiple times after
++ * mxc_request_dma() and mxc_dma_setup_channel().
++ *
++ *
++ * @param   channel           channel number
++ * @param   p                 request parameters pointer
++ * @param   bd_index          index of buffer descriptor to set
++ * @return  0 on success, error code on fail
++ */
++/* int mxc_dma_set_config(int channel, dma_request_t *p, int bd_index); */
++int mxc_dma_set_config(int channel, dma_request_t * p, int bd_index);
++
++/*!
++ * Returns request parameters.
++ *
++ * @param   channel           channel number
++ * @param   p                 request parameters pointer
++ * @param   bd_index          index of buffer descriptor to get
++ * @return  0 on success, error code on fail
++ */
++/* int mxc_dma_get_config(int channel, dma_request_t *p, int bd_index); */
++int mxc_dma_get_config(int channel, dma_request_t * p, int bd_index);
++
++/*!
++ * This function is used by MXC IPC's write_ex2. It passes the a pointer to the
++ * data control structure to iapi_write_ipcv2()
++ *
++ * @param channel  SDMA channel number
++ * @param ctrl_ptr Data Control structure pointer
++ */
++int mxc_sdma_write_ipcv2(int channel, void *ctrl_ptr);
++
++/*!
++ * This function is used by MXC IPC's read_ex2. It passes the a pointer to the
++ * data control structure to iapi_read_ipcv2()
++ *
++ * @param channel   SDMA channel number
++ * @param ctrl_ptr  Data Control structure pointer
++ */
++int mxc_sdma_read_ipcv2(int channel, void *ctrl_ptr);
++
++/*!
++ * Starts dma channel.
++ *
++ * @param   channel           channel number
++ */
++int mxc_dma_start(int channel);
++
++/*!
++ * Stops dma channel.
++ *
++ * @param   channel           channel number
++ */
++int mxc_dma_stop(int channel);
++
++/*!
++ * Frees dma channel.
++ *
++ * @param   channel           channel number
++ */
++void mxc_free_dma(int channel);
++
++/*!
++ * Sets callback function. Used with standard dma api
++ *  for supporting interrupts
++ *
++ * @param   channel           channel number
++ * @param   callback          callback function pointer
++ * @param   arg               argument for callback function
++ */
++void mxc_dma_set_callback(int channel, dma_callback_t callback, void *arg);
++
++/*!
++ * Allocates uncachable buffer. Uses hash table.
++ *
++ * @param   size    size of allocated buffer
++ * @return  pointer to buffer
++ */
++void *sdma_malloc(size_t size);
++
++#ifdef CONFIG_SDMA_IRAM
++/*!
++ * Allocates uncachable buffer from IRAM..
++ *
++ * @param   size    size of allocated buffer
++ * @return  pointer to buffer
++ */
++void *sdma_iram_malloc(size_t size);
++#endif				/*CONFIG_SDMA_IRAM */
++
++/*!
++ * Frees uncachable buffer. Uses hash table.
++ */
++void sdma_free(void *buf);
++
++/*!
++ * Converts virtual to physical address. Uses hash table.
++ *
++ * @param   buf  virtual address pointer
++ * @return  physical address value
++ */
++unsigned long sdma_virt_to_phys(void *buf);
++
++/*!
++ * Converts physical to virtual address. Uses hash table.
++ *
++ * @param   buf  physical address value
++ * @return  virtual address pointer
++ */
++void *sdma_phys_to_virt(unsigned long buf);
++
++/*!
++ * Configures the BD_INTR bit on a buffer descriptor parameters.
++ *
++ *
++ * @param   channel           channel number
++ * @param   bd_index          index of buffer descriptor to set
++ * @param   bd_intr           flag to set or clear the BD_INTR bit
++ */
++void mxc_dma_set_bd_intr(int channel, int bd_index, int bd_intr);
++
++/*!
++ * Gets the BD_INTR bit on a buffer descriptor.
++ *
++ *
++ * @param   channel           channel number
++ * @param   bd_index          index of buffer descriptor to set
++ *
++ * @return returns the BD_INTR bit status
++ */
++int mxc_dma_get_bd_intr(int channel, int bd_index);
++
++/*!
++ * Stop the current transfer
++ *
++ * @param   channel           channel number
++ * @param   buffer_number     number of buffers (beginning with 0),
++ *                            whose done bits should be reset to 0
++ */
++int mxc_dma_reset(int channel, int buffer_number);
++
++/*!
++ * This functions Returns the SDMA paramaters associated for a module
++ *
++ * @param channel_id the ID of the module requesting DMA
++ * @return returns the sdma parameters structure for the device
++ */
++mxc_sdma_channel_params_t *mxc_sdma_get_channel_params(mxc_dma_device_t
++						       channel_id);
++
++/*!
++ * This functions marks the SDMA channels that are statically allocated
++ *
++ * @param chnl the channel array used to store channel information
++ */
++void mxc_get_static_channels(mxc_dma_channel_t * chnl);
++
++/*!
++ * Initializes SDMA driver
++ */
++int __init sdma_init(void);
++
++#define DEFAULT_ERR     1
++
++#endif
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/spba.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/spba.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/spba.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/spba.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,66 @@
++
++/*
++ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/*!
++ * @defgroup SPBA Shared Peripheral Bus Arbiter (SPBA)
++ * @ingroup MSL_MX31 MSL_MX35 MSL_MX37 MSL_MX51 MSL_MXC91321
++ */
++
++/*!
++ * @file arch-mxc/spba.h
++ * @brief This file contains the Shared Peripheral Bus Arbiter (spba) API.
++ *
++ * @ingroup SPBA
++ */
++
++#ifndef __ASM_ARCH_MXC_SPBA_H__
++#define __ASM_ARCH_MXC_SPBA_H__
++
++#ifdef __KERNEL__
++
++#define MXC_SPBA_RAR_MASK       0x7
++
++/*!
++ * Defines three SPBA masters: A - ARM, C - SDMA (no master B for MX31)
++ */
++enum spba_masters {
++	SPBA_MASTER_A = 1,
++	SPBA_MASTER_B = 2,
++	SPBA_MASTER_C = 4,
++};
++
++/*!
++ * This function allows the three masters (A, B, C) to take ownership of a
++ * shared peripheral.
++ *
++ * @param  mod          specified module as defined in \b enum \b #spba_module
++ * @param  master       one of more (or-ed together) masters as defined in \b enum \b #spba_masters
++ *
++ * @return 0 if successful; -1 otherwise.
++ */
++int spba_take_ownership(int mod, int master);
++
++/*!
++ * This function releases the ownership for a shared peripheral.
++ *
++ * @param  mod          specified module as defined in \b enum \b #spba_module
++ * @param  master       one of more (or-ed together) masters as defined in \b enum \b #spba_masters
++ *
++ * @return 0 if successful; -1 otherwise.
++ */
++int spba_rel_ownership(int mod, int master);
++
++#endif				/* __KERNEL__ */
++
++#endif				/* __ASM_ARCH_MXC_SPBA_H__ */
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/timex.h linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/timex.h
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/include/mach/timex.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/include/mach/timex.h	2009-06-02 17:05:27.000000000 +0200
+@@ -23,7 +23,11 @@
+ #if defined CONFIG_ARCH_MX1
+ #define CLOCK_TICK_RATE		16000000
+ #elif defined CONFIG_ARCH_MX2
++#ifndef CONFIG_MACH_MX25
+ #define CLOCK_TICK_RATE		13300000
++#else
++#define CLOCK_TICK_RATE		12000000
++#endif
+ #elif defined CONFIG_ARCH_MX3
+ #define CLOCK_TICK_RATE		16625000
+ #endif
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/iomux-mx1-mx2.c linux-2.6.30-rc4-karo/arch/arm/plat-mxc/iomux-mx1-mx2.c
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/iomux-mx1-mx2.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/iomux-mx1-mx2.c	2009-06-02 17:05:27.000000000 +0200
+@@ -74,11 +74,12 @@ void mxc_gpio_mode(int gpio_mode)
+ 	__raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
+ 
+ 	if (pin < 16) {
++#ifndef CONFIG_MACH_MX25
+ 		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
+ 		tmp &= ~(3 << (pin * 2));
+ 		tmp |= (ocr << (pin * 2));
+ 		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
+-
++#endif
+ 		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
+ 		tmp &= ~(3 << (pin * 2));
+ 		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+@@ -90,12 +91,12 @@ void mxc_gpio_mode(int gpio_mode)
+ 		__raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
+ 	} else {
+ 		pin -= 16;
+-
++#ifndef CONFIG_MACH_MX25
+ 		tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
+ 		tmp &= ~(3 << (pin * 2));
+ 		tmp |= (ocr << (pin * 2));
+ 		__raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
+-
++#endif
+ 		tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
+ 		tmp &= ~(3 << (pin * 2));
+ 		tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/iomux-v3.c linux-2.6.30-rc4-karo/arch/arm/plat-mxc/iomux-v3.c
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/iomux-v3.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/iomux-v3.c	2009-06-02 17:05:27.000000000 +0200
+@@ -31,7 +31,24 @@
+ 
+ #define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+ 
+-static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
++#ifdef CONFIG_MACH_MX25
++#define NUM_PADS	0x228
++#else
++#define NUM_PADS	0x200
++#endif
++
++static unsigned long iomux_v3_pad_alloc_map[NUM_PADS / BITS_PER_LONG];
++
++static inline int mxc_iomux_v3_pad_offset(struct pad_desc *pad)
++{
++	int pad_ofs;
++	if (cpu_is_mx25())
++		pad_ofs = pad->mux_ctrl_ofs;
++	else
++		pad_ofs = pad->pad_ctrl_ofs;
++	BUG_ON((pad_ofs >> 7) >= ARRAY_SIZE(iomux_v3_pad_alloc_map));
++	return pad_ofs;
++}
+ 
+ /*
+  * setups a single pin:
+@@ -40,7 +57,7 @@ static unsigned long iomux_v3_pad_alloc_
+  */
+ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+ {
+-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
++	unsigned int pad_ofs = mxc_iomux_v3_pad_offset(pad);
+ 
+ 	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+ 		return -EBUSY;
+@@ -65,8 +82,10 @@ int mxc_iomux_v3_setup_multiple_pads(str
+ 
+ 	for (i = 0; i < count; i++) {
+ 		ret = mxc_iomux_v3_setup_pad(p);
+-		if (ret)
++		if (ret) {
++			printk(KERN_ERR "Failed to setup PAD[%d]: %d\n", i, ret);
+ 			goto setup_error;
++		}
+ 		p++;
+ 	}
+ 	return 0;
+@@ -79,7 +98,7 @@ EXPORT_SYMBOL(mxc_iomux_v3_setup_multipl
+ 
+ void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+ {
+-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
++	unsigned int pad_ofs = mxc_iomux_v3_pad_offset(pad);
+ 
+ 	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+ }
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/pwm.c linux-2.6.30-rc4-karo/arch/arm/plat-mxc/pwm.c
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/pwm.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/pwm.c	2009-06-02 17:05:27.000000000 +0200
+@@ -55,7 +55,7 @@ int pwm_config(struct pwm_device *pwm, i
+ 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ 		return -EINVAL;
+ 
+-	if (cpu_is_mx27() || cpu_is_mx3()) {
++	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
+ 		unsigned long long c;
+ 		unsigned long period_cycles, duty_cycles, prescale;
+ 		c = clk_get_rate(pwm->clk);
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/spba.c linux-2.6.30-rc4-karo/arch/arm/plat-mxc/spba.c
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/spba.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/spba.c	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,143 @@
++/*
++ * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/types.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <asm/io.h>
++#include <mach/hardware.h>
++#include <mach/spba.h>
++
++/*!
++ * @file plat-mxc/spba.c
++ *
++ * @brief This file contains the SPBA API implementation details.
++ *
++ * @ingroup SPBA
++ */
++
++static DEFINE_SPINLOCK(spba_lock);
++
++#define SPBA_MASTER_MIN                 1
++#define SPBA_MASTER_MAX                 7
++
++/*!
++ * the base addresses for the SPBA modules
++ */
++static unsigned long spba_base = (unsigned long)IO_ADDRESS(SPBA_CTRL_BASE_ADDR);
++
++/*!
++ * SPBA clock
++ */
++static struct clk *spba_clk;
++/*!
++ * This function allows the three masters (A, B, C) to take ownership of a
++ * shared peripheral.
++ *
++ * @param  mod          specified module as defined in \b enum \b #spba_module
++ * @param  master       one of more (or-ed together) masters as defined in \b enum \b #spba_masters
++ *
++ * @return 0 if successful; a negative errno value otherwise.
++ */
++int spba_take_ownership(int mod, int master)
++{
++	unsigned long spba_flags;
++	int rtn_val = -EIO;
++
++	if (master < SPBA_MASTER_MIN || master > SPBA_MASTER_MAX) {
++		printk("%s() invalid master %d\n", __FUNCTION__, master);
++		return -EINVAL;
++	}
++
++	if (spba_clk == NULL) {
++		spba_clk = clk_get(NULL, "spba");
++		if (IS_ERR(spba_clk)) {
++			int ret = PTR_ERR(spba_clk);
++
++			spba_clk = NULL;
++			return ret;
++		}
++	}
++	clk_enable(spba_clk);
++
++	spin_lock_irqsave(&spba_lock, spba_flags);
++	__raw_writel(master, spba_base + mod);
++
++	if ((__raw_readl(spba_base + mod) & MXC_SPBA_RAR_MASK) == master) {
++		rtn_val = 0;
++	}
++
++	spin_unlock_irqrestore(&spba_lock, spba_flags);
++
++	clk_disable(spba_clk);
++	return rtn_val;
++}
++
++/*!
++ * This function releases the ownership for a shared peripheral.
++ *
++ * @param  mod          specified module as defined in \b enum \b #spba_module
++ * @param  master       one of more (or-ed together) masters as defined in \b enum \b #spba_masters
++ *
++ * @return 0 if successful; a negativ errno value otherwise.
++ */
++int spba_rel_ownership(int mod, int master)
++{
++	unsigned long spba_flags;
++	volatile unsigned long rar;
++
++	if (master < SPBA_MASTER_MIN || master > SPBA_MASTER_MAX) {
++		printk("%s() invalid master %d\n", __FUNCTION__, master);
++		return -EINVAL;
++	}
++
++	if (spba_clk == NULL) {
++		spba_clk = clk_get(NULL, "spba");
++		if (IS_ERR(spba_clk)) {
++			int ret = PTR_ERR(spba_clk);
++			spba_clk = NULL;
++			return ret;
++		}
++	}
++	clk_enable(spba_clk);
++
++	if ((__raw_readl(spba_base + mod) & master) == 0) {
++		clk_disable(spba_clk);
++		return -EBUSY;	/* does not own it */
++	}
++
++	spin_lock_irqsave(&spba_lock, spba_flags);
++
++	/* Since only the last 3 bits are writeable, doesn't need to mask off
++	   bits 31-3 */
++	rar = __raw_readl(spba_base + mod) & (~master);
++	__raw_writel(rar, spba_base + mod);
++
++	if ((__raw_readl(spba_base + mod) & master) != 0) {
++		spin_unlock_irqrestore(&spba_lock, spba_flags);
++		clk_disable(spba_clk);
++		return -EIO;
++	}
++	spin_unlock_irqrestore(&spba_lock, spba_flags);
++
++	clk_disable(spba_clk);
++	return 0;
++}
++
++EXPORT_SYMBOL(spba_take_ownership);
++EXPORT_SYMBOL(spba_rel_ownership);
++
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("SPBA");
++MODULE_LICENSE("GPL");
+diff -urNp linux-2.6.30-rc4/arch/arm/plat-mxc/time.c linux-2.6.30-rc4-karo/arch/arm/plat-mxc/time.c
+--- linux-2.6.30-rc4/arch/arm/plat-mxc/time.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/plat-mxc/time.c	2009-06-02 17:05:27.000000000 +0200
+@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
+ {
+ 	unsigned int tmp;
+ 
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		__raw_writel(0, timer_base + MX3_IR);
+ 	else {
+ 		tmp = __raw_readl(timer_base + MXC_TCTL);
+@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
+ 
+ static inline void gpt_irq_enable(void)
+ {
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		__raw_writel(1<<0, timer_base + MX3_IR);
+ 	else {
+ 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+@@ -88,9 +88,9 @@ static void gpt_irq_acknowledge(void)
+ {
+ 	if (cpu_is_mx1())
+ 		__raw_writel(0, timer_base + MX1_2_TSTAT);
+-	if (cpu_is_mx2())
++	if (cpu_is_mx2() && !cpu_is_mx25())
+ 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+ }
+ 
+@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(s
+ {
+ 	unsigned int c = clk_get_rate(timer_clk);
+ 
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		clocksource_mxc.read = mx3_get_cycles;
+ 
+ 	clocksource_mxc.mult = clocksource_hz2mult(c,
+@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_even
+ 
+ 	if (mode != clockevent_mode) {
+ 		/* Set event time into far-far future */
+-		if (cpu_is_mx3())
++		if (cpu_is_mx3() || cpu_is_mx25())
+ 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+ 					timer_base + MX3_TCMP);
+ 		else
+@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(i
+ 	struct clock_event_device *evt = &clockevent_mxc;
+ 	uint32_t tstat;
+ 
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		tstat = __raw_readl(timer_base + MX3_TSTAT);
+ 	else
+ 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
+@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(st
+ {
+ 	unsigned int c = clk_get_rate(timer_clk);
+ 
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		clockevent_mxc.set_next_event = mx3_set_next_event;
+ 
+ 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
+@@ -287,6 +287,7 @@ void __init mxc_timer_init(struct clk *t
+ 	int irq;
+ 
+ 	clk_enable(timer_clk);
++printk(KERN_DEBUG "%s: \n", __FUNCTION__);
+ 
+ 	if (cpu_is_mx1()) {
+ #ifdef CONFIG_ARCH_MX1
+@@ -306,6 +307,7 @@ void __init mxc_timer_init(struct clk *t
+ 	} else
+ 		BUG();
+ 
++printk(KERN_DEBUG "%s: timer_base=%p IRQ=%d\n", __FUNCTION__, timer_base, irq);
+ 	/*
+ 	 * Initialise to a known state (all timers off, and timing reset)
+ 	 */
+@@ -313,7 +315,7 @@ void __init mxc_timer_init(struct clk *t
+ 	__raw_writel(0, timer_base + MXC_TCTL);
+ 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+ 
+-	if (cpu_is_mx3())
++	if (cpu_is_mx3() || cpu_is_mx25())
+ 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ 	else
+ 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+diff -urNp linux-2.6.30-rc4/arch/arm/tools/mach-types linux-2.6.30-rc4-karo/arch/arm/tools/mach-types
+--- linux-2.6.30-rc4/arch/arm/tools/mach-types	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/arch/arm/tools/mach-types	2009-06-02 17:05:27.000000000 +0200
+@@ -12,7 +12,7 @@
+ #
+ #   http://www.arm.linux.org.uk/developer/machines/?action=new
+ #
+-# Last update: Mon Mar 23 20:09:01 2009
++# Last update: Mon Apr 20 10:31:38 2009
+ #
+ # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
+ #
+@@ -1721,7 +1721,7 @@ sapphire		MACH_SAPPHIRE		SAPPHIRE		1729
+ csb637xo		MACH_CSB637XO		CSB637XO		1730
+ evisiong		MACH_EVISIONG		EVISIONG		1731
+ stmp37xx		MACH_STMP37XX		STMP37XX		1732
+-stmp378x		MACH_STMP38XX		STMP38XX		1733
++stmp378x		MACH_STMP378X		STMP378X		1733
+ tnt			MACH_TNT		TNT			1734
+ tbxt			MACH_TBXT		TBXT			1735
+ playmate		MACH_PLAYMATE		PLAYMATE		1736
+@@ -2132,3 +2132,41 @@ apollo			MACH_APOLLO		APOLLO			2141
+ at91cap9stk		MACH_AT91CAP9STK	AT91CAP9STK		2142
+ spc300			MACH_SPC300		SPC300			2143
+ eko			MACH_EKO		EKO			2144
++ccw9m2443		MACH_CCW9M2443		CCW9M2443		2145
++ccw9m2443js		MACH_CCW9M2443JS	CCW9M2443JS		2146
++m2m_router_device	MACH_M2M_ROUTER_DEVICE	M2M_ROUTER_DEVICE	2147
++str9104nas		MACH_STAR9104NAS	STAR9104NAS		2148
++pca100			MACH_PCA100		PCA100			2149
++z3_dm365_mod_01		MACH_Z3_DM365_MOD_01	Z3_DM365_MOD_01		2150
++hipox			MACH_HIPOX		HIPOX			2151
++omap3_piteds		MACH_OMAP3_PITEDS	OMAP3_PITEDS		2152
++bm150r			MACH_BM150R		BM150R			2153
++tbone			MACH_TBONE		TBONE			2154
++merlin			MACH_MERLIN		MERLIN			2155
++falcon			MACH_FALCON		FALCON			2156
++davinci_da850_evm	MACH_DAVINCI_DA850_EVM	DAVINCI_DA850_EVM	2157
++s5p6440			MACH_S5P6440		S5P6440			2158
++at91sam9g10ek		MACH_AT91SAM9G10EK	AT91SAM9G10EK		2159
++omap_4430sdp		MACH_OMAP_4430SDP	OMAP_4430SDP		2160
++lpc313x			MACH_LPC313X		LPC313X			2161
++magx_zn5		MACH_MAGX_ZN5		MAGX_ZN5		2162
++magx_em30		MACH_MAGX_EM30		MAGX_EM30		2163
++magx_ve66		MACH_MAGX_VE66		MAGX_VE66		2164
++meesc			MACH_MEESC		MEESC			2165
++otc570			MACH_OTC570		OTC570			2166
++bcu2412			MACH_BCU2412		BCU2412			2167
++beacon			MACH_BEACON		BEACON			2168
++actia_tgw		MACH_ACTIA_TGW		ACTIA_TGW		2169
++e4430			MACH_E4430		E4430			2170
++ql300			MACH_QL300		QL300			2171
++btmavb101		MACH_BTMAVB101		BTMAVB101		2172
++btmawb101		MACH_BTMAWB101		BTMAWB101		2173
++sq201			MACH_SQ201		SQ201			2174
++quatro45xx		MACH_QUATRO45XX		QUATRO45XX		2175
++openpad			MACH_OPENPAD		OPENPAD			2176
++tx25			MACH_TX25		TX25			2177
++omap3_torpedo		MACH_OMAP3_TORPEDO	OMAP3_TORPEDO		2178
++htcraphael_k		MACH_HTCRAPHAEL_K	HTCRAPHAEL_K		2179
++pxa255			MACH_PXA255		PXA255			2180
++lal43			MACH_LAL43		LAL43			2181
++htcraphael_cdma500	MACH_HTCRAPHAEL_CDMA500	HTCRAPHAEL_CDMA500	2182
+diff -urNp linux-2.6.30-rc4/drivers/leds/leds-gpio.c linux-2.6.30-rc4-karo/drivers/leds/leds-gpio.c
+--- linux-2.6.30-rc4/drivers/leds/leds-gpio.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/leds/leds-gpio.c	2009-06-02 17:05:27.000000000 +0200
+@@ -82,7 +82,7 @@ static int __devinit create_gpio_led(con
+ 	if (!gpio_is_valid(template->gpio)) {
+ 		printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", 
+ 				template->gpio, template->name);
+-		return 0;
++		return -EINVAL;
+ 	}
+ 
+ 	ret = gpio_request(template->gpio, template->name);
+diff -urNp linux-2.6.30-rc4/drivers/mtd/nand/Kconfig linux-2.6.30-rc4-karo/drivers/mtd/nand/Kconfig
+--- linux-2.6.30-rc4/drivers/mtd/nand/Kconfig	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/mtd/nand/Kconfig	2009-06-02 17:05:27.000000000 +0200
+@@ -420,6 +420,27 @@ config MTD_NAND_MXC
+ 	  This enables the driver for the NAND flash controller on the
+ 	  MXC processors.
+ 
++config MTD_NAND_MXC_FLASH_BBT
++	bool "Support a flash based bad block table"
++	depends on MTD_NAND_MXC
++
++config	ARCH_MXC_HAS_NFC_V1
++	bool
++
++config	ARCH_MXC_HAS_NFC_V1_1
++	select ARCH_MXC_HAS_NFC_V1
++	bool
++
++config	ARCH_MXC_HAS_NFC_V2
++	bool
++
++config	ARCH_MXC_HAS_NFC_V2_1
++	bool
++	select ARCH_MXC_HAS_NFC_V2
++
++config	ARCH_MXC_HAS_NFC_V3
++	bool
++
+ config MTD_NAND_SH_FLCTL
+ 	tristate "Support for NAND on Renesas SuperH FLCTL"
+ 	depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
+diff -urNp linux-2.6.30-rc4/drivers/mtd/nand/Makefile linux-2.6.30-rc4-karo/drivers/mtd/nand/Makefile
+--- linux-2.6.30-rc4/drivers/mtd/nand/Makefile	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/mtd/nand/Makefile	2009-06-02 17:05:27.000000000 +0200
+@@ -36,7 +36,13 @@ obj-$(CONFIG_MTD_NAND_ORION)		+= orion_n
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)		+= fsl_elbc_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_UPM)		+= fsl_upm.o
+ obj-$(CONFIG_MTD_NAND_SH_FLCTL)		+= sh_flctl.o
++ifneq ($(CONFIG_ARCH_MXC_HAS_NFC_V1),)
+ obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
++else
++ifneq ($(CONFIG_ARCH_MXC_HAS_NFC_V2),)
++obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nd2.o
++endif
++endif
+ obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
+ obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
+ 
+diff -urNp linux-2.6.30-rc4/drivers/mtd/nand/mxc_nand.c linux-2.6.30-rc4-karo/drivers/mtd/nand/mxc_nand.c
+--- linux-2.6.30-rc4/drivers/mtd/nand/mxc_nand.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/mtd/nand/mxc_nand.c	2009-06-02 17:05:27.000000000 +0200
+@@ -34,23 +34,52 @@
+ #include <asm/mach/flash.h>
+ #include <mach/mxc_nand.h>
+ 
++#ifdef CONFIG_MTD_DEBUG
++static int debug = 3;
++module_param(debug, int, S_IRUGO | S_IWUSR);
++
++#define dbg_lvl(n)	((n) < debug)
++#define DBG(lvl, fmt...)	do { if (dbg_lvl(lvl)) printk(KERN_DEBUG fmt); } while (0)
++#undef DEBUG
++#define DEBUG(l, fmt...) DBG(l, fmt)
++#else
++static int debug;
++module_param(debug, int, 0);
++
++#define dbg_lvl(n)	0
++#define DBG(lvl, fmt...)	do { } while (0)
++#endif
++
++
+ #define DRIVER_NAME "mxc_nand"
+ 
+ /* Addresses for NFC registers */
+-#define NFC_BUF_SIZE		0xE00
+-#define NFC_BUF_ADDR		0xE04
+-#define NFC_FLASH_ADDR		0xE06
+-#define NFC_FLASH_CMD		0xE08
+-#define NFC_CONFIG		0xE0A
+-#define NFC_ECC_STATUS_RESULT	0xE0C
+-#define NFC_RSLTMAIN_AREA	0xE0E
+-#define NFC_RSLTSPARE_AREA	0xE10
+-#define NFC_WRPROT		0xE12
+-#define NFC_UNLOCKSTART_BLKADDR	0xE14
+-#define NFC_UNLOCKEND_BLKADDR	0xE16
+-#define NFC_NF_WRPRST		0xE18
+-#define NFC_CONFIG1		0xE1A
+-#define NFC_CONFIG2		0xE1C
++#define NFC_BUF_SIZE		0x000
++#define NFC_BUF_ADDR		0x004
++#define NFC_FLASH_ADDR		0x006
++#define NFC_FLASH_CMD		0x008
++#define NFC_CONFIG		0x00A
++#define NFC_ECC_STATUS_RESULT	0x00C
++#define NFC_RSLTMAIN_AREA	0x00E
++#define NFC_RSLTSPARE_AREA	0x010
++#define NFC_WRPROT		0x012
++#ifndef CONFIG_ARCH_MXC_HAS_NFC_V1_1
++#define NFC_UNLOCKSTART_BLKADDR	0x014
++#define NFC_UNLOCKEND_BLKADDR	0x016
++#endif
++#define NFC_NF_WRPRST		0x018
++#define NFC_CONFIG1		0x01A
++#define NFC_CONFIG2		0x01C
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V1_1
++#define NFC_UNLOCKSTART_BLKADDR 0x020
++#define NFC_UNLOCKEND_BLKADDR	0x022
++#define NFC_UNLOCKSTART_BLKADDR1 0x024
++#define NFC_UNLOCKEND_BLKADDR1	0x026
++#define NFC_UNLOCKSTART_BLKADDR2 0x028
++#define NFC_UNLOCKEND_BLKADDR2	0x02a
++#define NFC_UNLOCKSTART_BLKADDR3 0x02c
++#define NFC_UNLOCKEND_BLKADDR3	0x02e
++#endif
+ 
+ /* Addresses for NFC RAM BUFFER Main area 0 */
+ #define MAIN_AREA0		0x000
+@@ -59,10 +88,27 @@
+ #define MAIN_AREA3		0x600
+ 
+ /* Addresses for NFC SPARE BUFFER Spare area 0 */
++#ifndef CONFIG_ARCH_MXC_HAS_NFC_V1_1
++#define SPARE_AREA_SIZE		16
+ #define SPARE_AREA0		0x800
+ #define SPARE_AREA1		0x810
+ #define SPARE_AREA2		0x820
+ #define SPARE_AREA3		0x830
++#else
++#define SPARE_AREA_SIZE		64
++#define MAIN_AREA4		0x800
++#define MAIN_AREA5		0xa00
++#define MAIN_AREA6		0xc00
++#define MAIN_AREA7		0xe00
++#define SPARE_AREA0		0x1000
++#define SPARE_AREA1		0x1040
++#define SPARE_AREA2		0x1080
++#define SPARE_AREA3		0x10c0
++#define SPARE_AREA4		0x1100
++#define SPARE_AREA5		0x1140
++#define SPARE_AREA6		0x1180
++#define SPARE_AREA7		0x11c0
++#endif
+ 
+ /* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
+  * for Command operation */
+@@ -107,6 +153,7 @@ struct mxc_nand_host {
+ 	struct device		*dev;
+ 
+ 	void __iomem		*regs;
++	void __iomem		*nfc_buf;
+ 	int			spare_only;
+ 	int			status_request;
+ 	int			pagesize_2k;
+@@ -128,32 +175,149 @@ struct mxc_nand_host {
+ #define MAIN_SINGLEBIT_ERROR 0x4
+ #define SPARE_SINGLEBIT_ERROR 0x1
+ 
++#ifndef CONFIG_ARCH_MXC_HAS_NFC_V1_1
+ /* OOB placement block for use with hardware ecc generation */
++static struct nand_ecclayout nand_hw_eccoob2k_8 = {
++	.eccbytes = 5,
++	.eccpos = {6, 7, 8, 9, 10},
++	.oobfree = {{0, 5}, {11, 11}, {27, 11}, {43, 5}}
++};
++
+ static struct nand_ecclayout nand_hw_eccoob_8 = {
+ 	.eccbytes = 5,
+ 	.eccpos = {6, 7, 8, 9, 10},
+-	.oobfree = {{0, 5}, {11, 5}, }
++	.oobfree = {{0, 5}, {11, 5}}
++};
++
++static struct nand_ecclayout nand_hw_eccoob2k_16 = {
++	.eccbytes = 5,
++	.eccpos = {6, 7, 8, 9, 10},
++	.oobfree = {{0, 6}, {12, 10}, {28, 10}, {44, 4}}
+ };
+ 
+ static struct nand_ecclayout nand_hw_eccoob_16 = {
+ 	.eccbytes = 5,
+ 	.eccpos = {6, 7, 8, 9, 10},
+-	.oobfree = {{0, 6}, {12, 4}, }
++	.oobfree = {{0, 6}, {12, 4}}
++};
++
++#ifdef CONFIG_MTD_NAND_MXC_FLASH_BBT
++static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
++static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
++
++static struct nand_bbt_descr bbt_main_descr = {
++	.options = (NAND_BBT_LASTBLOCK | NAND_BBT_WRITE |
++		    NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP),
++	.offs =	12,
++	.len = 4,
++	.veroffs = 11,
++	.maxblocks = 4,
++	.pattern = bbt_pattern,
++};
++
++static struct nand_bbt_descr bbt_mirror_descr = {
++	.options = (NAND_BBT_LASTBLOCK | NAND_BBT_WRITE |
++		    NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP),
++	.offs =	12,
++	.len = 4,
++	.veroffs = 11,
++	.maxblocks = 4,
++	.pattern = mirror_pattern,
++};
++#endif
++#else
++/*
++ * OOB placement block for use with hardware ecc generation
++ */
++static struct nand_ecclayout nand_hw_eccoob2k_8 = {
++	.eccbytes = 9,
++	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
++	.oobfree = {{0, 7}, {16, 7}, {32, 7}, {48, 7}},
++};
++
++static struct nand_ecclayout nand_hw_eccoob_8 = {
++	.eccbytes = 9,
++	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
++	.oobfree = {{0, 4}},
++};
++
++static struct nand_ecclayout nand_hw_eccoob2k_16 = {
++	.eccbytes = 9,
++	.eccpos = {6, 7, 8, 9, 10, 11, 12, 13, 14},
++	.oobfree = {{0, 6}, {17, 6}, {33, 6}, {47, 6}},
+ };
+ 
++static struct nand_ecclayout nand_hw_eccoob_16 = {
++	.eccbytes = 9,
++	.eccpos = {6, 7, 8, 9, 10, 11, 12, 13, 14},
++	.oobfree = {{0, 3}}
++};
++
++#ifdef CONFIG_MTD_NAND_MXC_FLASH_BBT
++/* Generic flash bbt decriptors
++*/
++static u8 bbt_pattern[] = { 'B', 'b', 't', '0' };
++static u8 mirror_pattern[] = { '1', 't', 'b', 'B' };
++
++static struct nand_bbt_descr bbt_main_descr = {
++	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
++	NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
++	.offs = 0,
++	.len = 4,
++	.veroffs = 4,
++	.maxblocks = 4,
++	.pattern = bbt_pattern
++};
++
++static struct nand_bbt_descr bbt_mirror_descr = {
++	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
++	NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
++	.offs = 0,
++	.len = 4,
++	.veroffs = 4,
++	.maxblocks = 4,
++	.pattern = mirror_pattern
++};
++#endif
++#endif
++
+ #ifdef CONFIG_MTD_PARTITIONS
+ static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
+ #endif
+ 
++#ifdef CONFIG_MTD_DEBUG
++#define nfc_read_reg(b, r)	__nfc_read_reg(b, r, #r, __FUNCTION__)
++static inline u16 __nfc_read_reg(void __iomem *base, unsigned int reg,
++				 const char *name, const char *fn)
++{
++	u16 val = readw(base + reg);
++	DBG(3, "%s: Read %04x from %s[%02x]\n", fn, val, name, reg);
++	return val;
++}
++
++#define nfc_write_reg(v, b, r)	__nfc_write_reg(v, b, r, #r, __FUNCTION__)
++static inline void __nfc_write_reg(u16 val, void __iomem *base, unsigned int reg,
++				   const char *name, const char *fn)
++{
++	DBG(3, "%s: Writing %04x to %s[%02x]\n", fn, val, name, reg);
++	writew(val, base + reg);
++}
++#else
++#define nfc_read_reg(b, r)	readw(b + r)
++#define nfc_write_reg(v, b, r)	writew(v, b + r)
++#endif
++
+ static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+ {
+ 	struct mxc_nand_host *host = dev_id;
+ 
+ 	uint16_t tmp;
+ 
+-	tmp = readw(host->regs + NFC_CONFIG1);
++	DEBUG(MTD_DEBUG_LEVEL0, "%s(%d)\n", __FUNCTION__, irq);
++
++	tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 	tmp |= NFC_INT_MSK; /* Disable interrupt */
+-	writew(tmp, host->regs + NFC_CONFIG1);
++	nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
+ 
+ 	wake_up(&host->irq_waitq);
+ 
+@@ -166,36 +330,31 @@ static irqreturn_t mxc_nfc_irq(int irq, 
+ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
+ 				uint16_t param, int useirq)
+ {
+-	uint32_t tmp;
++	uint32_t nfc_stat;
+ 
++	nfc_stat = nfc_read_reg(host->regs, NFC_CONFIG2);
+ 	if (useirq) {
+-		if ((readw(host->regs + NFC_CONFIG2) & NFC_INT) == 0) {
+-
+-			tmp = readw(host->regs + NFC_CONFIG1);
+-			tmp  &= ~NFC_INT_MSK;	/* Enable interrupt */
+-			writew(tmp, host->regs + NFC_CONFIG1);
+-
+-			wait_event(host->irq_waitq,
+-				readw(host->regs + NFC_CONFIG2) & NFC_INT);
+-
+-			tmp = readw(host->regs + NFC_CONFIG2);
+-			tmp  &= ~NFC_INT;
+-			writew(tmp, host->regs + NFC_CONFIG2);
++		if (!(nfc_stat & NFC_INT)) {
++			uint32_t cfg1;
++			const unsigned long timeout = 10;
++
++			cfg1 = nfc_read_reg(host->regs, NFC_CONFIG1);
++			cfg1 &= ~NFC_INT_MSK;	/* Enable interrupt */
++			nfc_write_reg(cfg1, host->regs, NFC_CONFIG1);
++
++			max_retries = wait_event_timeout(host->irq_waitq,
++				(nfc_stat = nfc_read_reg(host->regs,
++					NFC_CONFIG2)) & NFC_INT,
++				timeout);
+ 		}
+ 	} else {
+-		while (max_retries-- > 0) {
+-			if (readw(host->regs + NFC_CONFIG2) & NFC_INT) {
+-				tmp = readw(host->regs + NFC_CONFIG2);
+-				tmp  &= ~NFC_INT;
+-				writew(tmp, host->regs + NFC_CONFIG2);
+-				break;
+-			}
++		while (!(nfc_stat & NFC_INT) && max_retries-- > 0) {
++			nfc_stat = nfc_read_reg(host->regs, NFC_CONFIG2);
+ 			udelay(1);
+ 		}
+-		if (max_retries <= 0)
+-			DEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
+-			      __func__, param);
+ 	}
++	nfc_write_reg(nfc_stat & ~NFC_INT, host->regs, NFC_CONFIG2);
++	WARN_ONCE(max_retries <= 0, "%s(%d): INT not set\n", __func__, param);
+ }
+ 
+ /* This function issues the specified command to the NAND device and
+@@ -204,8 +363,8 @@ static void send_cmd(struct mxc_nand_hos
+ {
+ 	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+ 
+-	writew(cmd, host->regs + NFC_FLASH_CMD);
+-	writew(NFC_CMD, host->regs + NFC_CONFIG2);
++	nfc_write_reg(cmd, host->regs, NFC_FLASH_CMD);
++	nfc_write_reg(NFC_CMD, host->regs, NFC_CONFIG2);
+ 
+ 	/* Wait for operation to complete */
+ 	wait_op_done(host, TROP_US_DELAY, cmd, useirq);
+@@ -218,8 +377,8 @@ static void send_addr(struct mxc_nand_ho
+ {
+ 	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x %d)\n", addr, islast);
+ 
+-	writew(addr, host->regs + NFC_FLASH_ADDR);
+-	writew(NFC_ADDR, host->regs + NFC_CONFIG2);
++	nfc_write_reg(addr, host->regs, NFC_FLASH_ADDR);
++	nfc_write_reg(NFC_ADDR, host->regs, NFC_CONFIG2);
+ 
+ 	/* Wait for operation to complete */
+ 	wait_op_done(host, TROP_US_DELAY, addr, islast);
+@@ -233,19 +392,19 @@ static void send_prog_page(struct mxc_na
+ 	DEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+ 
+ 	/* NANDFC buffer 0 is used for page read/write */
+-	writew(buf_id, host->regs + NFC_BUF_ADDR);
++	nfc_write_reg(buf_id, host->regs, NFC_BUF_ADDR);
+ 
+ 	/* Configure spare or page+spare access */
+ 	if (!host->pagesize_2k) {
+-		uint16_t config1 = readw(host->regs + NFC_CONFIG1);
++		uint16_t config1 = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 		if (spare_only)
+ 			config1 |= NFC_SP_EN;
+ 		else
+ 			config1 &= ~(NFC_SP_EN);
+-		writew(config1, host->regs + NFC_CONFIG1);
++		nfc_write_reg(config1, host->regs, NFC_CONFIG1);
+ 	}
+ 
+-	writew(NFC_INPUT, host->regs + NFC_CONFIG2);
++	nfc_write_reg(NFC_INPUT, host->regs, NFC_CONFIG2);
+ 
+ 	/* Wait for operation to complete */
+ 	wait_op_done(host, TROP_US_DELAY, spare_only, true);
+@@ -259,19 +418,19 @@ static void send_read_page(struct mxc_na
+ 	DEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
+ 
+ 	/* NANDFC buffer 0 is used for page read/write */
+-	writew(buf_id, host->regs + NFC_BUF_ADDR);
++	nfc_write_reg(buf_id, host->regs, NFC_BUF_ADDR);
+ 
+ 	/* Configure spare or page+spare access */
+ 	if (!host->pagesize_2k) {
+-		uint32_t config1 = readw(host->regs + NFC_CONFIG1);
++		uint32_t config1 = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 		if (spare_only)
+ 			config1 |= NFC_SP_EN;
+ 		else
+ 			config1 &= ~NFC_SP_EN;
+-		writew(config1, host->regs + NFC_CONFIG1);
++		nfc_write_reg(config1, host->regs, NFC_CONFIG1);
+ 	}
+ 
+-	writew(NFC_OUTPUT, host->regs + NFC_CONFIG2);
++	nfc_write_reg(NFC_OUTPUT, host->regs, NFC_CONFIG2);
+ 
+ 	/* Wait for operation to complete */
+ 	wait_op_done(host, TROP_US_DELAY, spare_only, true);
+@@ -284,20 +443,20 @@ static void send_read_id(struct mxc_nand
+ 	uint16_t tmp;
+ 
+ 	/* NANDFC buffer 0 is used for device ID output */
+-	writew(0x0, host->regs + NFC_BUF_ADDR);
++	nfc_write_reg(0x0, host->regs, NFC_BUF_ADDR);
+ 
+ 	/* Read ID into main buffer */
+-	tmp = readw(host->regs + NFC_CONFIG1);
++	tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 	tmp &= ~NFC_SP_EN;
+-	writew(tmp, host->regs + NFC_CONFIG1);
++	nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
+ 
+-	writew(NFC_ID, host->regs + NFC_CONFIG2);
++	nfc_write_reg(NFC_ID, host->regs, NFC_CONFIG2);
+ 
+ 	/* Wait for operation to complete */
+ 	wait_op_done(host, TROP_US_DELAY, 0, true);
+ 
+ 	if (this->options & NAND_BUSWIDTH_16) {
+-		void __iomem *main_buf = host->regs + MAIN_AREA0;
++		void __iomem *main_buf = host->nfc_buf + MAIN_AREA0;
+ 		/* compress the ID info */
+ 		writeb(readb(main_buf + 2), main_buf + 1);
+ 		writeb(readb(main_buf + 4), main_buf + 2);
+@@ -311,29 +470,29 @@ static void send_read_id(struct mxc_nand
+  * NAND device status and returns the current status. */
+ static uint16_t get_dev_status(struct mxc_nand_host *host)
+ {
+-	void __iomem *main_buf = host->regs + MAIN_AREA1;
++	void __iomem *main_buf = host->nfc_buf + MAIN_AREA0;
+ 	uint32_t store;
+ 	uint16_t ret, tmp;
+ 	/* Issue status request to NAND device */
+ 
+-	/* store the main area1 first word, later do recovery */
++	/* store the main area first word, later do recovery */
+ 	store = readl(main_buf);
+-	/* NANDFC buffer 1 is used for device status to prevent
++	/* NANDFC buffer 0 is used for device status to prevent
+ 	 * corruption of read/write buffer on status requests. */
+-	writew(1, host->regs + NFC_BUF_ADDR);
++	nfc_write_reg(0, host->regs, NFC_BUF_ADDR);
+ 
+ 	/* Read status into main buffer */
+-	tmp = readw(host->regs + NFC_CONFIG1);
++	tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 	tmp &= ~NFC_SP_EN;
+-	writew(tmp, host->regs + NFC_CONFIG1);
++	nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
+ 
+-	writew(NFC_STATUS, host->regs + NFC_CONFIG2);
++	nfc_write_reg(NFC_STATUS, host->regs, NFC_CONFIG2);
+ 
+ 	/* Wait for operation to complete */
+ 	wait_op_done(host, TROP_US_DELAY, 0, true);
+ 
+ 	/* Status is placed in first word of main buffer */
+-	/* get status, then recovery area 1 data */
++	/* get status, then recover area 0 data */
+ 	ret = readw(main_buf);
+ 	writel(store, main_buf);
+ 
+@@ -369,7 +528,7 @@ static int mxc_nand_correct_data(struct 
+ 	 * additional correction.  2-Bit errors cannot be corrected by
+ 	 * HW ECC, so we need to return failure
+ 	 */
+-	uint16_t ecc_status = readw(host->regs + NFC_ECC_STATUS_RESULT);
++	uint16_t ecc_status = nfc_read_reg(host->regs, NFC_ECC_STATUS_RESULT);
+ 
+ 	if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
+ 		DEBUG(MTD_DEBUG_LEVEL0,
+@@ -392,8 +551,8 @@ static u_char mxc_nand_read_byte(struct 
+ 	struct mxc_nand_host *host = nand_chip->priv;
+ 	uint8_t ret = 0;
+ 	uint16_t col, rd_word;
+-	uint16_t __iomem *main_buf = host->regs + MAIN_AREA0;
+-	uint16_t __iomem *spare_buf = host->regs + SPARE_AREA0;
++	uint16_t __iomem *main_buf = host->nfc_buf + MAIN_AREA0;
++	uint16_t __iomem *spare_buf = host->nfc_buf + SPARE_AREA0;
+ 
+ 	/* Check for status request */
+ 	if (host->status_request)
+@@ -436,9 +595,9 @@ static uint16_t mxc_nand_read_word(struc
+ 		col += mtd->writesize;
+ 
+ 	if (col < mtd->writesize)
+-		p = (host->regs + MAIN_AREA0) + (col >> 1);
++		p = (host->nfc_buf + MAIN_AREA0) + (col >> 1);
+ 	else
+-		p = (host->regs + SPARE_AREA0) + ((col - mtd->writesize) >> 1);
++		p = (host->nfc_buf + SPARE_AREA0) + ((col - mtd->writesize) >> 1);
+ 
+ 	if (col & 1) {
+ 		rd_word = readw(p);
+@@ -464,6 +623,7 @@ static void mxc_nand_write_buf(struct mt
+ 	struct nand_chip *nand_chip = mtd->priv;
+ 	struct mxc_nand_host *host = nand_chip->priv;
+ 	int n, col, i = 0;
++	int ss = mtd->oobsize / (mtd->writesize >> 9);
+ 
+ 	DEBUG(MTD_DEBUG_LEVEL3,
+ 	      "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
+@@ -474,21 +634,27 @@ static void mxc_nand_write_buf(struct mt
+ 	/* Adjust saved column address */
+ 	if (col < mtd->writesize && host->spare_only)
+ 		col += mtd->writesize;
+-
++#if 0
+ 	n = mtd->writesize + mtd->oobsize - col;
+ 	n = min(len, n);
++#else
++	BUG_ON(len > mtd->writesize + mtd->oobsize - col);
++	n = len;
++#endif
+ 
+ 	DEBUG(MTD_DEBUG_LEVEL3,
+ 	      "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
+ 
+ 	while (n) {
+ 		void __iomem *p;
++		int si = (col - mtd->writesize) / 16;
+ 
+ 		if (col < mtd->writesize)
+-			p = host->regs + MAIN_AREA0 + (col & ~3);
++			p = host->nfc_buf + MAIN_AREA0 + (col & ~3);
+ 		else
+-			p = host->regs + SPARE_AREA0 -
+-						mtd->writesize + (col & ~3);
++			p = host->nfc_buf + SPARE_AREA0 +
++				si * SPARE_AREA_SIZE +
++				(col - mtd->writesize) % ss;
+ 
+ 		DEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
+ 		      __LINE__, p);
+@@ -542,6 +708,7 @@ static void mxc_nand_write_buf(struct mt
+ 			DEBUG(MTD_DEBUG_LEVEL3,
+ 			      "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
+ 			      __func__,  __LINE__, n, m, i, col);
++			BUG_ON(m == 0);
+ 
+ 			memcpy(p, &buf[i], m);
+ 			col += m;
+@@ -562,27 +729,50 @@ static void mxc_nand_read_buf(struct mtd
+ 	struct nand_chip *nand_chip = mtd->priv;
+ 	struct mxc_nand_host *host = nand_chip->priv;
+ 	int n, col, i = 0;
++	int ss = mtd->oobsize / (mtd->writesize >> 9);
+ 
+ 	DEBUG(MTD_DEBUG_LEVEL3,
+ 	      "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
+ 
+ 	col = host->col_addr;
++	if (dbg_lvl(2)) {
++		int si = col / 512;
++		print_hex_dump(KERN_DEBUG, "main: ", DUMP_PREFIX_ADDRESS,
++			       16, 2, host->nfc_buf + MAIN_AREA0, 64, 0);
++		print_hex_dump(KERN_DEBUG, "spare: ", DUMP_PREFIX_ADDRESS,
++			       16, 2, host->nfc_buf + SPARE_AREA0 +
++			       si * SPARE_AREA_SIZE, 16, 0);
++	}
+ 
+ 	/* Adjust saved column address */
+ 	if (col < mtd->writesize && host->spare_only)
+ 		col += mtd->writesize;
+-
++#if 0
+ 	n = mtd->writesize + mtd->oobsize - col;
+ 	n = min(len, n);
+-
++#else
++	/* If more data is requested to be read than is available in
++	 * the flash buffer this is clearly a BUG! */
++	BUG_ON(len > mtd->writesize + mtd->oobsize - col);
++	n = len;
++#endif
+ 	while (n) {
+ 		void __iomem *p;
++		int si = (col - mtd->writesize) / ss;
+ 
+ 		if (col < mtd->writesize)
+-			p = host->regs + MAIN_AREA0 + (col & ~3);
++			p = host->nfc_buf + MAIN_AREA0 + (col & ~3);
+ 		else
+-			p = host->regs + SPARE_AREA0 -
+-					mtd->writesize + (col & ~3);
++			p = host->nfc_buf + SPARE_AREA0 +
++				si * SPARE_AREA_SIZE +
++				(col - mtd->writesize) % ss;
++
++		DBG(1, "p=%p col=%03x ss=%d si=%d\n", p, col, ss, si);
++
++		if (dbg_lvl(3)) {
++			print_hex_dump(KERN_DEBUG, "spare: ", DUMP_PREFIX_ADDRESS,
++				       16, 2, p, 64, 0);
++		}
+ 
+ 		if (((col | (int)&buf[i]) & 3) || n < 16) {
+ 			uint32_t data;
+@@ -618,18 +808,23 @@ static void mxc_nand_read_buf(struct mtd
+ 			int m = mtd->writesize - col;
+ 
+ 			if (col >= mtd->writesize)
+-				m += mtd->oobsize;
++				m = ss;
+ 
+ 			m = min(n, m) & ~3;
++			DBG(1, "Copying %u byte from offset %03x[%p]\n",
++			    m + (col & 3), col, p);
++			BUG_ON(m == 0);
+ 			memcpy(&buf[i], p, m);
+ 			col += m;
+ 			i += m;
+ 			n -= m;
+ 		}
+ 	}
++	if (dbg_lvl(1)) {
++		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len);
++	}
+ 	/* Update saved column address */
+ 	host->col_addr = col;
+-
+ }
+ 
+ /* Used by the upper layer to verify the data in NAND Flash
+@@ -655,13 +850,15 @@ static void mxc_nand_select_chip(struct 
+ 	}
+ 
+ 	if (chip == -1) {
+-		writew(readw(host->regs + NFC_CONFIG1) & ~NFC_CE,
+-				host->regs + NFC_CONFIG1);
++		nfc_write_reg(host->regs,
++			nfc_read_reg(host->regs, NFC_CONFIG1) & ~NFC_CE,
++			NFC_CONFIG1);
+ 		return;
+ 	}
+ 
+-	writew(readw(host->regs + NFC_CONFIG1) | NFC_CE,
+-			host->regs + NFC_CONFIG1);
++	nfc_write_reg(host->regs,
++			nfc_read_reg(host->regs, NFC_CONFIG1) | NFC_CE,
++			NFC_CONFIG1);
+ #endif
+ 
+ 	switch (chip) {
+@@ -831,6 +1028,7 @@ static void mxc_nand_command(struct mtd_
+ 		break;
+ 
+ 	case NAND_CMD_READID:
++		host->col_addr = 0;
+ 		send_read_id(host);
+ 		break;
+ 
+@@ -851,9 +1049,12 @@ static int __init mxcnd_probe(struct pla
+ 	struct mtd_info *mtd;
+ 	struct mxc_nand_platform_data *pdata = pdev->dev.platform_data;
+ 	struct mxc_nand_host *host;
+-	struct resource *res;
++	struct resource *res1, *res2;
+ 	uint16_t tmp;
+-	int err = 0, nr_parts = 0;
++	int err, nr_parts;
++
++	DBG(0, "%s: pdata=%p hw_ecc=%d width=%d\n", __FUNCTION__,
++	    pdata, pdata->hw_ecc, pdata->width);
+ 
+ 	/* Allocate memory for MTD device structure and private data */
+ 	host = kzalloc(sizeof(struct mxc_nand_host), GFP_KERNEL);
+@@ -868,9 +1069,6 @@ static int __init mxcnd_probe(struct pla
+ 	mtd->owner = THIS_MODULE;
+ 	mtd->dev.parent = &pdev->dev;
+ 
+-	/* 50 us command delay time */
+-	this->chip_delay = 5;
+-
+ 	this->priv = host;
+ 	this->dev_ready = mxc_nand_dev_ready;
+ 	this->cmdfunc = mxc_nand_command;
+@@ -880,29 +1078,61 @@ static int __init mxcnd_probe(struct pla
+ 	this->write_buf = mxc_nand_write_buf;
+ 	this->read_buf = mxc_nand_read_buf;
+ 	this->verify_buf = mxc_nand_verify_buf;
++#ifdef CONFIG_MTD_NAND_MXC_FLASH_BBT
++	this->bbt_td = &bbt_main_descr;
++	this->bbt_md = &bbt_mirror_descr;
++	this->options |= NAND_USE_FLASH_BBT;
++#endif
+ 
+-	host->clk = clk_get(&pdev->dev, "nfc");
+-	if (IS_ERR(host->clk))
++	host->clk = clk_get(&pdev->dev, "nfc_clk");
++	if (IS_ERR(host->clk)) {
++		err = PTR_ERR(host->clk);
+ 		goto eclk;
++	}
++	printk(KERN_DEBUG "NFC clk rate: %lu\n", clk_get_rate(host->clk));
++	clk_set_rate(host->clk, 11000000);
++	printk(KERN_DEBUG "NFC clk rate: %lu\n", clk_get_rate(host->clk));
+ 
+ 	clk_enable(host->clk);
+ 	host->clk_act = 1;
+ 
+-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-	if (!res) {
++	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res1) {
+ 		err = -ENODEV;
+ 		goto eres;
+ 	}
++	if (!request_mem_region(res1->start, resource_size(res1), "mxc_nand")) {
++		err = -EBUSY;
++		goto ereq1;
++	}
+ 
+-	host->regs = ioremap(res->start, res->end - res->start + 1);
++	res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (res2) {
++		if (!request_mem_region(res2->start, resource_size(res2), "mxc_nand")) {
++			err = -EBUSY;
++			goto ereq2;
++		}
++	}
++
++	host->regs = ioremap(res1->start, resource_size(res1));
+ 	if (!host->regs) {
+-		err = -EIO;
+-		goto eres;
++		err = -ENOMEM;
++		goto eunmap1;
+ 	}
+ 
+-	tmp = readw(host->regs + NFC_CONFIG1);
++	if (!res2) {
++		host->nfc_buf = host->regs;
++		host->regs += 0xe00;
++	} else {
++		host->nfc_buf = ioremap(res2->start, resource_size(res2));
++		if (!host->regs) {
++			err = -ENOMEM;
++			goto eunmap2;
++		}
++	}
++	tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 	tmp |= NFC_INT_MSK;
+-	writew(tmp, host->regs + NFC_CONFIG1);
++	nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
+ 
+ 	init_waitqueue_head(&host->irq_waitq);
+ 
+@@ -911,7 +1141,7 @@ static int __init mxcnd_probe(struct pla
+ 	err = request_irq(host->irq, mxc_nfc_irq, 0, "mxc_nd", host);
+ 	if (err)
+ 		goto eirq;
+-
++#if 0
+ 	if (pdata->hw_ecc) {
+ 		this->ecc.calculate = mxc_nand_calculate_ecc;
+ 		this->ecc.hwctl = mxc_nand_enable_hwecc;
+@@ -919,50 +1149,90 @@ static int __init mxcnd_probe(struct pla
+ 		this->ecc.mode = NAND_ECC_HW;
+ 		this->ecc.size = 512;
+ 		this->ecc.bytes = 3;
++		if (
+ 		this->ecc.layout = &nand_hw_eccoob_8;
+-		tmp = readw(host->regs + NFC_CONFIG1);
++		tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 		tmp |= NFC_ECC_EN;
+-		writew(tmp, host->regs + NFC_CONFIG1);
++		nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
+ 	} else {
+ 		this->ecc.size = 512;
+ 		this->ecc.bytes = 3;
+ 		this->ecc.layout = &nand_hw_eccoob_8;
+ 		this->ecc.mode = NAND_ECC_SOFT;
+-		tmp = readw(host->regs + NFC_CONFIG1);
++		tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
+ 		tmp &= ~NFC_ECC_EN;
+-		writew(tmp, host->regs + NFC_CONFIG1);
++		nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
+ 	}
+-
++#endif
+ 	/* Reset NAND */
+ 	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ 
+ 	/* preset operation */
+ 	/* Unlock the internal RAM Buffer */
+-	writew(0x2, host->regs + NFC_CONFIG);
++	nfc_write_reg(0x2, host->regs, NFC_CONFIG);
+ 
+ 	/* Blocks to be unlocked */
+-	writew(0x0, host->regs + NFC_UNLOCKSTART_BLKADDR);
+-	writew(0x4000, host->regs + NFC_UNLOCKEND_BLKADDR);
++	nfc_write_reg(0x0, host->regs, NFC_UNLOCKSTART_BLKADDR);
++	nfc_write_reg(0x4000, host->regs, NFC_UNLOCKEND_BLKADDR);
+ 
+ 	/* Unlock Block Command for given address range */
+-	writew(0x4, host->regs + NFC_WRPROT);
++	nfc_write_reg(0x4, host->regs, NFC_WRPROT);
+ 
+ 	/* NAND bus width determines access funtions used by upper layer */
+ 	if (pdata->width == 2) {
+ 		this->options |= NAND_BUSWIDTH_16;
+-		this->ecc.layout = &nand_hw_eccoob_16;
+ 	}
+ 
+-	host->pagesize_2k = 0;
+-
+ 	/* Scan to find existence of the device */
+-	if (nand_scan(mtd, 1)) {
++	err = nand_scan_ident(mtd, 1);
++	if (err) {
+ 		DEBUG(MTD_DEBUG_LEVEL0,
+ 		      "MXC_ND: Unable to find any NAND device.\n");
+-		err = -ENXIO;
++		goto escan;
++	}
++	/* this is required before completing the scan */
++	host->pagesize_2k = (mtd->writesize == 2048);
++
++	if (pdata->width == 2) {
++		if (host->pagesize_2k) {
++			this->ecc.layout = &nand_hw_eccoob2k_16;
++		} else {
++			this->ecc.layout = &nand_hw_eccoob_16;
++		}
++	} else {
++		if (host->pagesize_2k) {
++			this->ecc.layout = &nand_hw_eccoob2k_8;
++		} else {
++			this->ecc.layout = &nand_hw_eccoob_8;
++		}
++	}
++	if (pdata->hw_ecc) {
++		this->ecc.calculate = mxc_nand_calculate_ecc;
++		this->ecc.hwctl = mxc_nand_enable_hwecc;
++		this->ecc.correct = mxc_nand_correct_data;
++		this->ecc.mode = NAND_ECC_HW;
++		this->ecc.size = 512;
++		this->ecc.bytes = 3;
++		tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
++		tmp |= NFC_ECC_EN;
++		nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
++	} else {
++		this->ecc.size = 512;
++		this->ecc.bytes = 3;
++		this->ecc.mode = NAND_ECC_SOFT;
++		tmp = nfc_read_reg(host->regs, NFC_CONFIG1);
++		tmp &= ~NFC_ECC_EN;
++		nfc_write_reg(tmp, host->regs, NFC_CONFIG1);
++	}
++
++	err = nand_scan_tail(mtd);
++	if (err) {
+ 		goto escan;
+ 	}
+ 
++	pr_info("MXC MTD nand Driver IRQ %d bus width: %u bit %s ECC IO: %08lx\n",
++		host->irq, pdata->width * 8, pdata->hw_ecc ? "HW" : "SW",
++		(unsigned long)res1->start);
+ 	/* Register the partitions */
+ #ifdef CONFIG_MTD_PARTITIONS
+ 	nr_parts =
+@@ -981,10 +1251,19 @@ static int __init mxcnd_probe(struct pla
+ 	return 0;
+ 
+ escan:
+-	free_irq(host->irq, NULL);
++	free_irq(host->irq, host);
+ eirq:
++	if (host->regs != host->nfc_buf)
++		iounmap(host->nfc_buf);
++eunmap2:
+ 	iounmap(host->regs);
++eunmap1:
++	release_mem_region(res2->start, resource_size(res2));
++ereq2:
++	release_mem_region(res1->start, resource_size(res1));
++ereq1:
+ eres:
++	clk_disable(host->clk);
+ 	clk_put(host->clk);
+ eclk:
+ 	kfree(host);
+@@ -995,46 +1274,63 @@ eclk:
+ static int __devexit mxcnd_remove(struct platform_device *pdev)
+ {
+ 	struct mxc_nand_host *host = platform_get_drvdata(pdev);
++	struct resource *res;
+ 
++	if (host->clk_act)
++		clk_disable(host->clk);
+ 	clk_put(host->clk);
+ 
+-	platform_set_drvdata(pdev, NULL);
+-
+ 	nand_release(&host->mtd);
+-	free_irq(host->irq, NULL);
++	free_irq(host->irq, host);
+ 	iounmap(host->regs);
+ 	kfree(host);
+ 
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (res) {
++		release_mem_region(res->start, resource_size(res));
++	}
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (res) {
++		release_mem_region(res->start, resource_size(res));
++	}
+ 	return 0;
+ }
+ 
+ #ifdef CONFIG_PM
+ static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
+ {
+-	struct mtd_info *info = platform_get_drvdata(pdev);
++	struct mtd_info *mtd = platform_get_drvdata(pdev);
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_nand_host *host = nand_chip->priv;
+ 	int ret = 0;
+ 
+ 	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
+-	if (info)
+-		ret = info->suspend(info);
++	if (mtd)
++		ret = mtd->suspend(mtd);
+ 
++	if (host->clk_act) {
+ 	/* Disable the NFC clock */
+-	clk_disable(nfc_clk);	/* FIXME */
++		clk_disable(host->clk);
++	}
+ 
+ 	return ret;
+ }
+ 
+ static int mxcnd_resume(struct platform_device *pdev)
+ {
+-	struct mtd_info *info = platform_get_drvdata(pdev);
++	struct mtd_info *mtd = platform_get_drvdata(pdev);
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_nand_host *host = nand_chip->priv;
+ 	int ret = 0;
+ 
+ 	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
+-	/* Enable the NFC clock */
+-	clk_enable(nfc_clk);	/* FIXME */
+ 
+-	if (info)
+-		info->resume(info);
++	if (host->clk_act) {
++		/* Enable the NFC clock */
++		clk_enable(host->clk);
++	}
++	if (mtd)
++		mtd->resume(mtd);
+ 
+ 	return ret;
+ }
+@@ -1047,7 +1343,7 @@ static int mxcnd_resume(struct platform_
+ static struct platform_driver mxcnd_driver = {
+ 	.driver = {
+ 		   .name = DRIVER_NAME,
+-		   },
++	},
+ 	.remove = __exit_p(mxcnd_remove),
+ 	.suspend = mxcnd_suspend,
+ 	.resume = mxcnd_resume,
+@@ -1055,13 +1351,14 @@ static struct platform_driver mxcnd_driv
+ 
+ static int __init mxc_nd_init(void)
+ {
++	int ret;
++
+ 	/* Register the device driver structure. */
+-	pr_info("MXC MTD nand Driver\n");
+-	if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
++	ret = platform_driver_probe(&mxcnd_driver, mxcnd_probe);
++	if (ret != 0) {
+ 		printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
+-		return -ENODEV;
+ 	}
+-	return 0;
++	return ret;
+ }
+ 
+ static void __exit mxc_nd_cleanup(void)
+diff -urNp linux-2.6.30-rc4/drivers/mtd/nand/mxc_nd2.c linux-2.6.30-rc4-karo/drivers/mtd/nand/mxc_nd2.c
+--- linux-2.6.30-rc4/drivers/mtd/nand/mxc_nd2.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/drivers/mtd/nand/mxc_nd2.c	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,1651 @@
++/*
++ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/interrupt.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/mtd/partitions.h>
++#include <asm/mach/flash.h>
++#include <asm/io.h>
++
++#ifdef CONFIG_MTD_DEBUG
++static int debug = 0;
++module_param(debug, int, S_IRUGO | S_IWUSR);
++
++#define dbg_lvl(n)	((n) < debug)
++#define DBG(lvl, fmt...)	do { if (dbg_lvl(lvl)) printk(KERN_DEBUG fmt); } while (0)
++#undef DEBUG
++#define DEBUG DBG
++#else
++static int debug;
++module_param(debug, int, 0);
++
++#define dbg_lvl(n)	0
++#define DBG(lvl, fmt...)	do { } while (0)
++#endif
++
++#include "mxc_nd2.h"
++
++#define DRV_NAME "mxc_nand"
++
++
++/* Global address Variables */
++/*
++static void __iomem *nfc_axi_base;
++static void __iomem *nfc_ip_base;
++*/
++
++struct mxc_mtd_s {
++	struct mtd_info mtd;
++	struct nand_chip nand;
++	struct mtd_partition *parts;
++	struct device *dev;
++	wait_queue_head_t irq_waitq;
++	int irq;
++
++	u8 *data_buf;
++	u8 *oob_buf;
++	struct clk *clk;
++	int clk_act;
++
++	struct resource *res_ip;
++	struct resource *res_axi;
++	void __iomem *reg_base;
++	void __iomem *axi_base;
++	u16 __iomem *main_buf;
++	u16 __iomem *spare_buf;
++
++	bool status_req;
++	u16 col_addr;
++};
++
++/*
++ * Define delays in microsec for NAND device operations
++ */
++#define TROP_US_DELAY	2000
++
++#ifdef CONFIG_MTD_NAND_MXC_SWECC
++static int hardware_ecc = 0;
++#else
++static int hardware_ecc = 1;
++#endif
++
++static u8 num_of_interleave = 1;
++
++/*
++ * OOB placement block for use with hardware ecc generation
++ */
++static struct nand_ecclayout nand_hw_eccoob_512 = {
++	.eccbytes = 9,
++	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
++	.oobfree = {{0, 4}},
++};
++
++static struct nand_ecclayout nand_hw_eccoob_2k = {
++	.eccbytes = 9,
++	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
++	.oobfree = {{2, 5}, {16, 7}, {32, 7}, {48,7}},
++};
++
++static struct nand_ecclayout nand_hw_eccoob_4k = {
++	.eccbytes = 9,
++	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
++	.oobfree = {{2, 5}, {16, 218 - 16}},
++};
++
++/*!
++ * @defgroup NAND_MTD NAND Flash MTD Driver for MXC processors
++ */
++
++/*!
++ * @file mxc_nd2.c
++ *
++ * @brief This file contains the hardware specific layer for NAND Flash on
++ * MXC processor
++ *
++ * @ingroup NAND_MTD
++ */
++
++#ifdef CONFIG_MTD_PARTITIONS
++static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL };
++#endif
++
++static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
++{
++	struct mxc_mtd_s *mxc_nand_data = dev_id;
++
++	/* Disable Interrupt */
++	nfc_write_reg(mxc_nand_data,
++		      nfc_read_reg(mxc_nand_data, REG_NFC_INTERRUPT) |
++		      NFC_INT_MSK, REG_NFC_INTERRUPT);
++	wake_up(&mxc_nand_data->irq_waitq);
++
++	return IRQ_HANDLED;
++}
++
++/*
++ * Functions to transfer data to/from spare erea.
++ */
++static void
++copy_spare(struct mtd_info *mtd, void *pbuf, void *pspare, int len, bool bfrom)
++{
++	u16 i, j;
++	u16 m = mtd->oobsize;
++	u16 n = mtd->writesize >> 9;
++	u8 *d = (u8 *) pbuf;
++	u8 *s = (u8 *) pspare;
++	u16 t = SPARE_LEN;
++
++	m /= num_of_interleave;
++	n /= num_of_interleave;
++
++	j = (m / n >> 1) << 1;
++
++	if (bfrom) {
++		for (i = 0; i < n - 1; i++)
++			memcpy(&d[i * j], &s[i * t], j);
++
++		/* the last section */
++		memcpy(&d[i * j], &s[i * t], len - i * j);
++	} else {
++		for (i = 0; i < n - 1; i++)
++			memcpy(&s[i * t], &d[i * j], j);
++
++		/* the last section */
++		memcpy(&s[i * t], &d[i * j], len - i * j);
++	}
++}
++
++/*!
++ * This function polls the NFC to wait for the basic operation to complete by
++ * checking the INT bit of config2 register.
++ *
++ * @param       retries        number of retry attempts (separated by 1 us)
++ * @param       useirq         True if IRQ should be used rather than polling
++ */
++static void wait_op_done(struct mxc_mtd_s *mxc_nand_data, int retries, bool useirq)
++{
++	u32 nfc_stat;
++	static unsigned long max_wait[2];
++	unsigned long timeout = msecs_to_jiffies(retries);
++	int op;
++
++	nfc_stat = nfc_read_reg(mxc_nand_data, REG_NFC_OPS_STAT);
++	op = nfc_stat & 0xff;
++	DBG(2, "%s: cmd: 0x%02x op: 0x%02x irq: %d\n", __FUNCTION__,
++		__raw_readw(mxc_nand_data->reg_base + REG_NFC_FLASH_CMD),
++		op, useirq);
++	if (useirq) {
++		if (!(nfc_stat & NFC_OPS_STAT)) {
++			/* Enable Interrupt */
++			nfc_write_reg(mxc_nand_data,
++				nfc_read_reg(mxc_nand_data,
++					REG_NFC_INTERRUPT) & ~NFC_INT_MSK,
++					REG_NFC_INTERRUPT);
++			retries = wait_event_timeout(mxc_nand_data->irq_waitq,
++				(nfc_stat = nfc_read_reg(mxc_nand_data,
++					REG_NFC_OPS_STAT)) & NFC_OPS_STAT,
++				timeout);
++		}
++	} else {
++		while (!(nfc_stat & NFC_OPS_STAT) && retries-- > 0) {
++			udelay(1);
++			nfc_stat = nfc_read_reg(mxc_nand_data, REG_NFC_OPS_STAT);
++		}
++	}
++	if (!(nfc_stat & NFC_OPS_STAT) && retries <= 0) {
++		printk(KERN_ERR "%s: timeout waiting for NFC INT for cmd: 0x%02x op 0x%02x: %d\n",
++			__FUNCTION__, __raw_readw(mxc_nand_data->reg_base +
++				REG_NFC_FLASH_CMD), op, useirq);
++		BUG();
++	} else {
++		unsigned long wait = (useirq ? timeout : TROP_US_DELAY) - retries;
++		if (wait > max_wait[useirq]) {
++			max_wait[useirq] = wait;
++			DBG(2, "%s: ready(%d) after %lu ticks\n", __FUNCTION__,
++			    useirq, max_wait[useirq]);
++		}
++	}
++	WRITE_NFC_IP_REG(nfc_stat & ~NFC_OPS_STAT, REG_NFC_OPS_STAT);
++	if (nfc_stat & NFC_OPS_STAT) {
++		DBG(2, "%s: Done: irq: %d ticks: %d\n", __FUNCTION__, useirq, retries);
++	} else {
++		DBG(0, "%s: Failed: irq: %d\n", __FUNCTION__, useirq);
++	}
++}
++
++static inline void send_atomic_cmd(struct mxc_mtd_s *mxc_nand_data, u16 cmd, bool useirq)
++{
++	/* fill command */
++	nfc_write_reg(mxc_nand_data, cmd, REG_NFC_FLASH_CMD);
++
++	/* clear status */
++	ACK_OPS;
++
++	/* send out command */
++	nfc_write_reg(mxc_nand_data, NFC_CMD, REG_NFC_OPS);
++
++	/* Wait for operation to complete */
++	wait_op_done(mxc_nand_data, TROP_US_DELAY, useirq);
++}
++
++static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr);
++static int mxc_check_ecc_status(struct mtd_info *mtd);
++
++#ifdef NFC_AUTO_MODE_ENABLE
++/*!
++ * This function handle the interleave related work
++ * @param	mtd	mtd info
++ * @param	cmd	command
++ */
++static void auto_cmd_interleave(struct mtd_info *mtd, u16 cmd)
++{
++	u32 i;
++	u32 j = num_of_interleave;
++	struct nand_chip *this = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	u32 addr_low = nfc_read_reg(mxc_nand_data, NFC_FLASH_ADDR0);
++	u32 addr_high = nfc_read_reg(mxc_nand_data, NFC_FLASH_ADDR8);
++	u32 page_addr = addr_low >> 16 | addr_high << 16;
++	u8 *dbuf = mxc_nand_data->data_buf;
++	u8 *obuf = mxc_nand_data->oob_buf;
++	u32 dlen = mtd->writesize / j;
++	u32 olen = mtd->oobsize / j;
++
++	/* adjust the addr value
++	 * since ADD_OP mode is 01
++	 */
++	if (j > 1)
++		page_addr *= j;
++	else
++		page_addr *= this->numchips;
++
++	switch (cmd) {
++	case NAND_CMD_PAGEPROG:
++		for (i = 0; i < j; i++) {
++			/* reset addr cycle */
++			if (j > 1)
++				mxc_do_addr_cycle(mtd, 0, page_addr++);
++
++			/* data transfer */
++			memcpy(mxc_nand_data->main_buf, dbuf, dlen);
++			copy_spare(mtd, obuf, mxc_nand_data->spare_buf, olen, false);
++
++			/* update the value */
++			dbuf += dlen;
++			obuf += olen;
++
++			NFC_SET_RBA(0);
++			ACK_OPS;
++			nfc_write_reg(mxc_nand_data, NFC_AUTO_PROG, REG_NFC_OPS);
++
++			/* wait auto_prog_done bit set */
++			while (!(raw_read(REG_NFC_OPS_STAT) & NFC_OP_DONE)) ;
++		}
++
++		wait_op_done(TROP_US_DELAY, false);
++		while (!(raw_read(REG_NFC_OPS_STAT) & NFC_RB)) ;
++
++		break;
++	case NAND_CMD_READSTART:
++		for (i = 0; i < j; i++) {
++			/* reset addr cycle */
++			if (j > 1)
++				mxc_do_addr_cycle(mtd, 0, page_addr++);
++
++			NFC_SET_RBA(0);
++			ACK_OPS;
++			nfc_write_reg(mxc_nand_data, NFC_AUTO_READ, REG_NFC_OPS);
++			wait_op_done(mxc_nand_data, TROP_US_DELAY, true);
++
++			/* check ecc error */
++			mxc_check_ecc_status(mtd);
++
++			/* data transfer */
++			memcpy(dbuf, mxc_nand_data->main_buf, dlen);
++			copy_spare(mtd, obuf, mxc_nand_data->spare_buf, olen, true);
++
++			/* update the value */
++			dbuf += dlen;
++			obuf += olen;
++		}
++		break;
++	case NAND_CMD_ERASE2:
++		for (i = 0; i < j; i++) {
++			if (!i) {
++				page_addr = addr_low;
++				page_addr *= (j > 1 ? j : this->numchips);
++			}
++			mxc_do_addr_cycle(mtd, -1, page_addr++);
++			ACK_OPS;
++			nfc_write_reg(NFC_AUTO_ERASE, REG_NFC_OPS);
++			wait_op_done(TROP_US_DELAY, true);
++		}
++		break;
++	case NAND_CMD_RESET:
++		for (i = 0; i < j; i++) {
++			if (j > 1)
++				NFC_SET_NFC_ACTIVE_CS(i);
++			send_atomic_cmd(cmd, false);
++		}
++		break;
++	}
++}
++#endif
++
++static void send_addr(struct mxc_mtd_s *mxc_nand_data, u16 addr, bool useirq);
++
++/*!
++ * This function issues the specified command to the NAND device and
++ * waits for completion.
++ *
++ * @param       cmd     command for NAND Flash
++ * @param       useirq  True if IRQ should be used rather than polling
++ */
++static void send_cmd(struct mtd_info *mtd, u16 cmd, bool useirq)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	DEBUG(MTD_DEBUG_LEVEL3, "send_cmd(0x%x, %d)\n", cmd, useirq);
++
++#ifdef NFC_AUTO_MODE_ENABLE
++	switch (cmd) {
++	case NAND_CMD_READ0:
++	case NAND_CMD_READOOB:
++		nfc_write_reg(mxc_nand_data, NAND_CMD_READ0, REG_NFC_FLASH_CMD);
++		break;
++	case NAND_CMD_SEQIN:
++	case NAND_CMD_ERASE1:
++		nfc_write_reg(mxc_nand_data, cmd, REG_NFC_FLASH_CMD);
++		break;
++	case NAND_CMD_PAGEPROG:
++	case NAND_CMD_ERASE2:
++	case NAND_CMD_READSTART:
++		nfc_write_reg(mxc_nand_data,
++			      nfc_read_reg(mxc_nand_data, REG_NFC_FLASH_CMD) |
++			      cmd << NFC_CMD_1_SHIFT,
++			      REG_NFC_FLASH_CMD);
++		auto_cmd_interleave(mtd, cmd);
++		break;
++	case NAND_CMD_READID:
++		send_atomic_cmd(mxc_nand_data, cmd, useirq);
++		send_addr(mxc_nand_data, 0, false);
++		break;
++	case NAND_CMD_RESET:
++		auto_cmd_interleave(mtd, cmd);
++	case NAND_CMD_STATUS:
++		break;
++	}
++#else
++	send_atomic_cmd(mxc_nand_data, cmd, useirq);
++#endif
++}
++
++/*!
++ * This function sends an address (or partial address) to the
++ * NAND device.  The address is used to select the source/destination for
++ * a NAND command.
++ *
++ * @param       addr    address to be written to NFC.
++ * @param       useirq  True if IRQ should be used rather than polling
++ */
++static void send_addr(struct mxc_mtd_s *mxc_nand_data, u16 addr, bool useirq)
++{
++	DEBUG(MTD_DEBUG_LEVEL3, "send_addr(0x%x %d)\n", addr, useirq);
++
++	/* fill address */
++	nfc_write_reg(mxc_nand_data, (addr << NFC_FLASH_ADDR_SHIFT),
++		      REG_NFC_FLASH_ADDR);
++
++	/* clear status */
++	ACK_OPS;
++
++	/* send out address */
++	nfc_write_reg(mxc_nand_data, NFC_ADDR, REG_NFC_OPS);
++
++	/* Wait for operation to complete */
++	wait_op_done(mxc_nand_data, TROP_US_DELAY, useirq);
++}
++
++/*!
++ * This function requests the NFC to initate the transfer
++ * of data currently in the NFC RAM buffer to the NAND device.
++ *
++ * @param	buf_id	      Specify Internal RAM Buffer number
++ */
++static void send_prog_page(struct mxc_mtd_s *mxc_nand_data, u8 buf_id)
++{
++#ifndef NFC_AUTO_MODE_ENABLE
++	DEBUG(MTD_DEBUG_LEVEL0, "%s\n", __FUNCTION__);
++
++	/* set ram buffer id */
++	NFC_SET_RBA(buf_id);
++
++	/* clear status */
++	ACK_OPS;
++
++	/* transfer data from NFC ram to nand */
++	nfc_write_reg(mxc_nand_data, NFC_INPUT, REG_NFC_OPS);
++
++	/* Wait for operation to complete */
++	wait_op_done(mxc_nand_data, TROP_US_DELAY, true);
++#endif
++}
++
++/*!
++ * This function requests the NFC to initated the transfer
++ * of data from the NAND device into in the NFC ram buffer.
++ *
++ * @param  	buf_id		Specify Internal RAM Buffer number
++ */
++static void send_read_page(struct mxc_mtd_s *mxc_nand_data, u8 buf_id)
++{
++#ifndef NFC_AUTO_MODE_ENABLE
++	DEBUG(MTD_DEBUG_LEVEL2, "%s(%d)\n", __FUNCTION__, buf_id);
++
++	/* set ram buffer id */
++	NFC_SET_RBA(buf_id);
++
++	/* clear status */
++	ACK_OPS;
++
++	/* transfer data from nand to NFC ram */
++	nfc_write_reg(mxc_nand_data, NFC_OUTPUT, REG_NFC_OPS);
++
++	/* Wait for operation to complete */
++	wait_op_done(mxc_nand_data, TROP_US_DELAY, true);
++#endif
++}
++
++/*!
++ * This function requests the NFC to perform a read of the
++ * NAND device ID.
++ */
++static void send_read_id(struct mxc_mtd_s *mxc_nand_data)
++{
++	DBG(2, "%s: \n", __FUNCTION__);
++
++	/* Set RBA bits for BUFFER0 */
++	NFC_SET_RBA(0);
++
++	/* clear status */
++	ACK_OPS;
++
++	/* Read ID into main buffer */
++	nfc_write_reg(mxc_nand_data, NFC_ID, REG_NFC_OPS);
++
++	/* Wait for operation to complete */
++	wait_op_done(mxc_nand_data, TROP_US_DELAY, true);
++}
++
++#ifdef NFC_AUTO_MODE_ENABLE
++static inline void read_dev_status(u16 *status)
++{
++	u32 mask = 0xFF << 16;
++
++	/* clear status */
++	ACK_OPS;
++
++	do {
++		/* send auto read status command */
++		nfc_write_reg(NFC_AUTO_STATE, REG_NFC_OPS);
++		if (cpu_is_mx51_rev(CHIP_REV_2_0) == 1)
++			wait_op_done(TROP_US_DELAY, false);
++		*status = (raw_read(NFC_CONFIG1) & mask) >> 16;
++	} while ((*status & NAND_STATUS_READY) == 0);
++}
++#endif
++
++/*!
++ * This function requests the NFC to perform a read of the
++ * NAND device status and returns the current status.
++ *
++ * @return  device status
++ */
++static u16 get_dev_status(struct mxc_mtd_s *mxc_nand_data)
++{
++#ifdef NFC_AUTO_MODE_ENABLE
++	int i;
++	u16 status = 0;
++	for (i = 0; i < num_of_interleave; i++) {
++
++		/* set ative cs */
++		NFC_SET_NFC_ACTIVE_CS(i);
++
++		/* FIXME, NFC Auto erase may have
++		 * problem, have to poll it until
++		 * the nand get idle, otherwise
++		 * it may get error
++		 */
++		read_dev_status(&status);
++		if (status & NAND_STATUS_FAIL)
++			break;
++	}
++
++	return status;
++#else
++	u8 val = 1;
++	u16 *main_buf = mxc_nand_data->main_buf + val * (0x200 >> 1);
++	u16 ret;
++	u16 save = *main_buf;
++
++	/* Set ram buffer id */
++	NFC_SET_RBA(val);
++
++	/* clear status */
++	ACK_OPS;
++
++	if (dbg_lvl(3)) {
++		for (val = 0; val < 8; val++) {
++			u16 *main_buf = mxc_nand_data->main_buf + val * (0x200 >> 1);
++			print_hex_dump(KERN_DEBUG, "mainbuf0: ",
++				       DUMP_PREFIX_ADDRESS,
++				       16, 2, main_buf, 16, 0);
++		}
++	}
++
++	/* Read status into main buffer */
++	nfc_write_reg(mxc_nand_data, NFC_STATUS, REG_NFC_OPS);
++
++	/* Wait for operation to complete */
++	wait_op_done(mxc_nand_data, TROP_US_DELAY, true);
++
++	if (dbg_lvl(3)) {
++		for (val = 0; val < 8; val++) {
++			u16 *main_buf = mxc_nand_data->main_buf + val * (0x200 >> 1);
++			print_hex_dump(KERN_DEBUG, "mainbuf1: ",
++				       DUMP_PREFIX_ADDRESS,
++				       16, 2, main_buf, 16, 0);
++		}
++	}
++
++	/* Status is placed in first word of main buffer */
++	/* get status, then recover area 1 data */
++	ret = *main_buf;
++	*main_buf = save;
++
++	return ret;
++#endif
++}
++
++static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	nfc_write_reg(mxc_nand_data,
++		      (nfc_read_reg(mxc_nand_data, REG_NFC_ECC_EN) | NFC_ECC_EN),
++		      REG_NFC_ECC_EN);
++	return;
++}
++
++/*
++ * Function to record the ECC corrected/uncorrected errors resulted
++ * after a page read. This NFC detects and corrects upto to 4 symbols
++ * of 9-bits each.
++ */
++static int mxc_check_ecc_status(struct mtd_info *mtd)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	int no_subpages = (mtd->writesize >> 9) / num_of_interleave;
++	int ret = 0;
++	u8 ecc_bit_mask = (IS_4BIT_ECC ? 0x7 : 0xf);
++	u8 err_limit = (IS_4BIT_ECC ? 0x4 : 0x8);
++	u32 ecc_stat;
++
++	ecc_stat = GET_NFC_ECC_STATUS();
++	do {
++		u32 err = ecc_stat & ecc_bit_mask;
++		if (err > err_limit) {
++			mtd->ecc_stats.failed++;
++			printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
++			return -EILSEQ;
++		} else {
++			ret += err;
++		}
++		ecc_stat >>= 4;
++	} while (--no_subpages);
++
++	mtd->ecc_stats.corrected += ret;
++	pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
++
++	return ret;
++}
++
++/*
++ * Function to correct the detected errors. This NFC corrects all the errors
++ * detected. So this function just return 0.
++ */
++static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
++				 u_char *read_ecc, u_char *calc_ecc)
++{
++	return 0;
++}
++
++/*
++ * Function to calculate the ECC for the data to be stored in the Nand device.
++ * This NFC has a hardware RS(511,503) ECC engine together with the RS ECC
++ * CONTROL blocks are responsible for detection  and correction of up to
++ * 8 symbols of 9 bits each in 528 byte page.
++ * So this function is just return 0.
++ */
++
++static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
++				  u_char *ecc_code)
++{
++	return 0;
++}
++
++/*!
++ * This function id is used to read the data buffer from the NAND Flash. To
++ * read the data from NAND Flash first the data output cycle is initiated by
++ * the NFC, which copies the data to RAMbuffer. This data of length \b len is
++ * then copied to buffer \b buf.
++ *
++ * @param       mtd     MTD structure for the NAND Flash
++ * @param       buf     data to be read from NAND Flash
++ * @param       len     number of bytes to be read
++ */
++static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	u16 col = mxc_nand_data->col_addr;
++
++	if (mtd->writesize) {
++		int j = mtd->writesize - col;
++		int n = min((int)mtd->oobsize + j, len);
++
++		if (j > 0) {
++			if (WARN_ON(n > j)) {
++				memcpy(buf, &mxc_nand_data->data_buf[col], j);
++				memcpy(buf + j, &mxc_nand_data->oob_buf[0], n - j);
++			} else {
++				memcpy(buf, &mxc_nand_data->data_buf[col], n);
++			}
++		} else {
++			col -= mtd->writesize;
++			memcpy(buf, &mxc_nand_data->oob_buf[col], len);
++		}
++
++		/* update */
++		mxc_nand_data->col_addr += n;
++	} else {
++		/* At flash identify phase,
++		 * mtd->writesize has not been
++		 * set correctly, it should
++		 * be zero. And len will less 2
++		 */
++		memcpy(buf, &mxc_nand_data->data_buf[col], len);
++
++		/* update */
++		mxc_nand_data->col_addr += len;
++	}
++}
++
++/*!
++ * This function reads byte from the NAND Flash
++ *
++ * @param       mtd     MTD structure for the NAND Flash
++ *
++ * @return    data read from the NAND Flash
++ */
++static u8 mxc_nand_read_byte(struct mtd_info *mtd)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	u8 ret;
++
++	/* Check for status request */
++	if (mxc_nand_data->status_req) {
++		ret = get_dev_status(mxc_nand_data) & 0xFF;
++		DBG(1, "%s: NAND status=%02x\n", __FUNCTION__, ret);
++		return ret;
++	}
++
++	mxc_nand_read_buf(mtd, &ret, 1);
++	return ret;
++}
++
++/*!
++  * This function reads word from the NAND Flash
++  *
++  * @param     mtd     MTD structure for the NAND Flash
++  *
++  * @return    data read from the NAND Flash
++  */
++static u16 mxc_nand_read_word(struct mtd_info *mtd)
++{
++	u16 ret;
++
++	mxc_nand_read_buf(mtd, (u8 *)&ret, sizeof(u16));
++	return ret;
++}
++
++/*!
++ * This function reads byte from the NAND Flash
++ *
++ * @param     mtd     MTD structure for the NAND Flash
++ *
++ * @return    data read from the NAND Flash
++ */
++static u_char mxc_nand_read_byte16(struct mtd_info *mtd)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	/* Check for status request */
++	if (mxc_nand_data->status_req) {
++		return get_dev_status(mxc_nand_data) & 0xFF;
++	}
++
++	return mxc_nand_read_word(mtd) & 0xFF;
++}
++
++/*!
++ * This function writes data of length \b len from buffer \b buf to the NAND
++ * internal RAM buffer's MAIN area 0.
++ *
++ * @param       mtd     MTD structure for the NAND Flash
++ * @param       buf     data to be written to NAND Flash
++ * @param       len     number of bytes to be written
++ */
++static void mxc_nand_write_buf(struct mtd_info *mtd,
++			       const u_char *buf, int len)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	u16 col = mxc_nand_data->col_addr;
++	int j = mtd->writesize - col;
++	int n = mtd->oobsize + j;
++
++	n = min(n, len);
++
++	if (j > 0) {
++		if (n > j) {
++			memcpy(&mxc_nand_data->data_buf[col], buf, j);
++			memcpy(&mxc_nand_data->oob_buf[0], buf + j, n - j);
++		} else {
++			memcpy(&mxc_nand_data->data_buf[col], buf, n);
++		}
++	} else {
++		col -= mtd->writesize;
++		memcpy(&mxc_nand_data->oob_buf[col], buf, len);
++	}
++
++	/* update */
++	mxc_nand_data->col_addr += n;
++}
++
++/*!
++ * This function is used by the upper layer to verify the data in NAND Flash
++ * with the data in the \b buf.
++ *
++ * @param       mtd     MTD structure for the NAND Flash
++ * @param       buf     data to be verified
++ * @param       len     length of the data to be verified
++ *
++ * @return      -EFAULT if error else 0
++ *
++ */
++static int mxc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf,
++			       int len)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	u_char *s = mxc_nand_data->data_buf;
++	const u_char *p = buf;
++
++	for (; len > 0; len--) {
++		if (*p++ != *s++)
++			return -EFAULT;
++	}
++
++	return 0;
++}
++
++/*!
++ * This function is used by upper layer for select and deselect of the NAND
++ * chip
++ *
++ * @param       mtd     MTD structure for the NAND Flash
++ * @param       chip    val indicating select or deselect
++ */
++static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	switch (chip) {
++	case -1:
++		if (mxc_nand_data->clk_act) {
++			/* Disable the NFC clock */
++			clk_disable(mxc_nand_data->clk);
++			mxc_nand_data->clk_act = 0;
++		}
++		break;
++	case 0 ... 7:
++		/* Enable the NFC clock */
++		if (!mxc_nand_data->clk_act) {
++			clk_enable(mxc_nand_data->clk);
++			mxc_nand_data->clk_act = 1;
++		}
++		NFC_SET_NFC_ACTIVE_CS(chip);
++		break;
++	default:
++		BUG();
++	}
++}
++
++/*
++ * Function to perform the address cycles.
++ */
++static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++#ifdef NFC_AUTO_MODE_ENABLE
++	if (page_addr != -1 && column != -1) {
++		u32 mask = 0xFFFF;
++		/* the column address */
++		nfc_write_reg(mxc_nand_data, column & mask, NFC_FLASH_ADDR0);
++		nfc_write_reg(mxc_nand_data,
++			      (nfc_read_reg(mxc_nand_data, NFC_FLASH_ADDR0) |
++			       ((page_addr & mask) << 16)), NFC_FLASH_ADDR0);
++		/* the row address */
++		nfc_write_reg(mxc_nand_data,
++			      ((nfc_read_reg(mxc_nand_data, NFC_FLASH_ADDR8) &
++				(mask << 16)) |
++			       ((page_addr & (mask << 16)) >> 16)),
++			      NFC_FLASH_ADDR8);
++	} else if (page_addr != -1) {
++		nfc_write_reg(mxc_nand_data, page_addr, NFC_FLASH_ADDR0);
++	}
++
++	DEBUG(MTD_DEBUG_LEVEL3,
++	      "AutoMode:the ADDR REGS value is (0x%x, 0x%x)\n",
++	      nfc_read_reg(mxc_nand_data, NFC_FLASH_ADDR0),
++	      nfc_read_reg(mxc_nand_data, NFC_FLASH_ADDR8));
++#else
++
++	u32 page_mask = nand_chip->pagemask;
++
++	if (column != -1) {
++		send_addr(mxc_nand_data, column & 0xFF, false);
++		if (IS_2K_PAGE_NAND) {
++			/* another col addr cycle for 2k page */
++			send_addr(mxc_nand_data, (column >> 8) & 0xF, false);
++		} else if (IS_4K_PAGE_NAND) {
++			/* another col addr cycle for 4k page */
++			send_addr(mxc_nand_data, (column >> 8) & 0x1F, false);
++		}
++	}
++	if (page_addr != -1) {
++		do {
++			send_addr(mxc_nand_data, (page_addr & 0xff), false);
++			page_mask >>= 8;
++			page_addr >>= 8;
++		} while (page_mask != 0);
++	}
++#endif
++}
++
++/*!
++ * This function is used by the upper layer to write command to NAND Flash for
++ * different operations to be carried out on NAND Flash
++ *
++ * @param       mtd             MTD structure for the NAND Flash
++ * @param       command         command for NAND Flash
++ * @param       column          column offset for the page read
++ * @param       page_addr       page to be read from NAND Flash
++ */
++static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
++			     int column, int page_addr)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	bool useirq = false;
++
++	DEBUG(MTD_DEBUG_LEVEL2,
++	      "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
++	      command, column, page_addr);
++	/*
++	 * Reset command state information
++	 */
++	mxc_nand_data->status_req = false;
++
++	/*
++	 * Command pre-processing step
++	 */
++	switch (command) {
++	case NAND_CMD_STATUS:
++		mxc_nand_data->col_addr = 0;
++		mxc_nand_data->status_req = true;
++		break;
++
++	case NAND_CMD_READ0:
++		mxc_nand_data->col_addr = column;
++		break;
++
++	case NAND_CMD_READOOB:
++		mxc_nand_data->col_addr = column;
++		command = NAND_CMD_READ0;
++		break;
++
++	case NAND_CMD_SEQIN:
++		if (column != 0) {
++			/* Before sending SEQIN command for partial
++			 * write, we need to read one page out.
++			 * FSL NFC does not support partial write
++			 * for large page devices. It alway sends out
++			 * 512+ecc+512+ecc....
++			 * For small page nand flash, it would support
++			 * SPARE ONLY operation. But to simplify the driver,
++			 * we take the same approach for small page and
++			 * large page devices:
++			 * read out the whole page and update.
++			 * As for MLC nand NOP(num of operation) = 1.
++			 * Partial writing to one programmed page is
++			 * not allowed! We can't limit it in the driver,
++			 * the upper layer application needs to take care of it.
++			 */
++			mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
++		}
++
++		mxc_nand_data->col_addr = column;
++		break;
++
++	case NAND_CMD_PAGEPROG:
++#ifndef NFC_AUTO_MODE_ENABLE
++		/* The NFC internal buffer access
++		 * has some limitation, it does not
++		 * allow byte access. To make the code
++		 * simple and easy to use, do not check
++		 * the address alignment each time.
++		 * Use the temp buffer to accomodate
++		 * the data alignment.
++		 * We know data_buf will be at least 4
++		 * byte aligned, so we can use
++		 * memcpy safely.
++		 */
++		memcpy(mxc_nand_data->main_buf, mxc_nand_data->data_buf, mtd->writesize);
++		copy_spare(mtd, mxc_nand_data->oob_buf, mxc_nand_data->spare_buf,
++			   mtd->oobsize, false);
++#endif
++
++		if (IS_LARGE_PAGE_NAND)
++			PROG_PAGE(mxc_nand_data);
++		else
++			send_prog_page(mxc_nand_data, 0);
++		useirq = true;
++		break;
++
++	case NAND_CMD_ERASE1:
++		break;
++	case NAND_CMD_ERASE2:
++		useirq = true;
++
++		break;
++	}
++
++	/*
++	 * Write out the command to the device.
++	 */
++	send_cmd(mtd, command, useirq);
++
++	mxc_do_addr_cycle(mtd, column, page_addr);
++
++	/*
++	 * Command post-processing step
++	 */
++	switch (command) {
++
++	case NAND_CMD_READOOB:
++	case NAND_CMD_READ0:
++		if (IS_LARGE_PAGE_NAND) {
++			/* send read confirm command */
++			send_cmd(mtd, NAND_CMD_READSTART, true);
++			/* read for each AREA */
++			READ_PAGE(mxc_nand_data);
++		} else {
++			send_read_page(mxc_nand_data, 0);
++		}
++
++#ifndef NFC_AUTO_MODE_ENABLE
++		/* FIXME, the NFC interal buffer
++		 * access has some limitation, it
++		 * does not allow byte access. To
++		 * make the code simple and ease use
++		 * do not check the address alignment
++		 * on each access. Use the temp buffer
++		 * to accomodate the data. Since we
++		 * know data_buf will be at least 4
++		 * byte alignment, so we can use
++		 * memcpy safely
++		 */
++		memcpy(mxc_nand_data->data_buf, mxc_nand_data->main_buf, mtd->writesize);
++		copy_spare(mtd, mxc_nand_data->oob_buf,
++			   mxc_nand_data->spare_buf, mtd->oobsize, true);
++#endif
++
++		break;
++
++	case NAND_CMD_READID:
++		send_read_id(mxc_nand_data);
++		mxc_nand_data->col_addr = column;
++		memcpy(mxc_nand_data->data_buf, mxc_nand_data->main_buf, 2048);
++		break;
++	}
++}
++
++static int mxc_nand_read_oob(struct mtd_info *mtd,
++			     struct nand_chip *chip, int page, int sndcmd)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	if (sndcmd) {
++		chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
++		sndcmd = 0;
++	}
++
++	memcpy(chip->oob_poi, mxc_nand_data->oob_buf, mtd->oobsize);
++
++	return sndcmd;
++}
++
++static int mxc_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
++			      u8 *buf)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++#ifndef NFC_AUTO_MODE_ENABLE
++	if (mxc_check_ecc_status(mtd) < 0) {
++		//printk(KERN_ERR "ECC error in block %u page %u\n",);
++	}
++#endif
++
++	memcpy(buf, mxc_nand_data->data_buf, mtd->writesize);
++	memcpy(chip->oob_poi, mxc_nand_data->oob_buf, mtd->oobsize);
++
++	return 0;
++}
++
++static void mxc_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
++				const u8 *buf)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	memcpy(mxc_nand_data->data_buf, buf, mtd->writesize);
++	memcpy(mxc_nand_data->oob_buf, chip->oob_poi, mtd->oobsize);
++}
++
++/* Define some generic bad / good block scan pattern which are used
++ * while scanning a device for factory marked good / bad blocks. */
++static u8 scan_ff_pattern[] = { 0xff, 0xff };
++
++static struct nand_bbt_descr smallpage_memorybased = {
++	.options = NAND_BBT_SCAN2NDPAGE,
++	.offs = 5,
++	.len = 1,
++	.pattern = scan_ff_pattern
++};
++
++static struct nand_bbt_descr largepage_memorybased = {
++	.options = 0,
++	.offs = 0,
++	.len = 2,
++	.pattern = scan_ff_pattern
++};
++
++/* Generic flash bbt decriptors
++*/
++static u8 bbt_pattern[] = { 'B', 'b', 't', '0' };
++static u8 mirror_pattern[] = { '1', 't', 'b', 'B' };
++
++static struct nand_bbt_descr bbt_main_descr = {
++	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
++	NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
++	.offs = 0,
++	.len = 4,
++	.veroffs = 4,
++	.maxblocks = 4,
++	.pattern = bbt_pattern
++};
++
++static struct nand_bbt_descr bbt_mirror_descr = {
++	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
++	NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
++	.offs = 0,
++	.len = 4,
++	.veroffs = 4,
++	.maxblocks = 4,
++	.pattern = mirror_pattern
++};
++
++static int mxc_nand_scan_bbt(struct mtd_info *mtd)
++{
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	if (IS_2K_PAGE_NAND) {
++		NFC_SET_NFMS(1 << NFMS_NF_PG_SZ);
++	} else if (IS_4K_PAGE_NAND) {
++		NFC_SET_NFMS(1 << NFMS_NF_PG_SZ);
++	} else {
++	}
++
++	/* reconfig for interleave mode */
++#ifdef NFC_AUTO_MODE_ENABLE
++	if (nand_chip->numchips > 1) {
++		num_of_interleave = nand_chip->numchips;
++		nand_chip->numchips = 1;
++
++		/* FIXEME:need remove it
++		 * when kernel support
++		 * 4G larger space
++		 */
++		mtd->size = nand_chip->chipsize;
++		mtd->erasesize *= num_of_interleave;
++		mtd->writesize *= num_of_interleave;
++		mtd->oobsize *= num_of_interleave;
++		nand_chip->page_shift = ffs(mtd->writesize) - 1;
++		nand_chip->bbt_erase_shift =
++		    nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
++		nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;
++		nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
++	}
++#endif
++	/* jffs2 not write oob */
++	//mtd->flags |= MTD_OOB_READONLY;
++
++	/* use flash based bbt */
++	nand_chip->bbt_td = &bbt_main_descr;
++	nand_chip->bbt_md = &bbt_mirror_descr;
++
++	/* update flash based bbt */
++	nand_chip->options |= NAND_USE_FLASH_BBT;
++
++	if (!nand_chip->badblock_pattern) {
++		nand_chip->badblock_pattern = (mtd->writesize > 512) ?
++		    &largepage_memorybased : &smallpage_memorybased;
++	}
++
++	/* Build bad block table */
++	return nand_scan_bbt(mtd, nand_chip->badblock_pattern);
++}
++
++static void mxc_nfc_init(struct mxc_mtd_s *mxc_nand_data)
++{
++	/* Disable interrupt */
++	nfc_write_reg(mxc_nand_data,
++		      nfc_read_reg(mxc_nand_data, REG_NFC_INTERRUPT) |
++		      NFC_INT_MSK, REG_NFC_INTERRUPT);
++
++	/* disable spare enable */
++	nfc_write_reg(mxc_nand_data,
++		      nfc_read_reg(mxc_nand_data, REG_NFC_SP_EN) &
++		      ~NFC_SP_EN, REG_NFC_SP_EN);
++
++	/* Unlock the internal RAM Buffer */
++	nfc_write_reg(mxc_nand_data, NFC_SET_BLS(NFC_BLS_UNLOCKED),
++		      REG_NFC_BLS);
++
++	/* Blocks to be unlocked */
++	UNLOCK_ADDR(0x0, 0xFFFF);
++
++	/* Unlock Block Command for given address range */
++	nfc_write_reg(mxc_nand_data, NFC_SET_WPC(NFC_WPC_UNLOCK), REG_NFC_WPC);
++
++	/* Enable symmetric mode by default except mx37TO1.0 */
++	if (!cpu_is_mx25()) {
++		nfc_write_reg(mxc_nand_data,
++			      nfc_read_reg(mxc_nand_data, REG_NFC_ONE_CYCLE) |
++			      NFC_ONE_CYCLE, REG_NFC_ONE_CYCLE);
++	} else {
++		nfc_write_reg(mxc_nand_data,
++			      nfc_read_reg(mxc_nand_data, REG_NFC_ONE_CYCLE) &
++			      ~NFC_ONE_CYCLE, REG_NFC_ONE_CYCLE);
++	}
++}
++
++static int mxc_alloc_buf(struct mxc_mtd_s *mxc_nand_data)
++{
++	u8 *buf;
++
++	buf = kzalloc(NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL);
++	if (!buf) {
++		printk(KERN_ERR "%s: failed to allocate data_buf\n", __func__);
++		return -ENOMEM;
++	}
++	mxc_nand_data->data_buf = buf;
++	mxc_nand_data->oob_buf = &buf[NAND_MAX_PAGESIZE];
++	return 0;
++}
++
++static void mxc_free_buf(struct mxc_mtd_s *mxc_nand_data)
++{
++	kfree(mxc_nand_data->data_buf);
++}
++
++/*!
++ * This function is called during the driver binding process.
++ *
++ * @param   pdev  the device structure used to store device specific
++ *                information that is used by the suspend, resume and
++ *                remove functions
++ *
++ * @return  The function always returns 0.
++ */
++#define SPLIT_SCAN
++
++static int __init mxcnd_probe(struct platform_device *pdev)
++{
++	int err;
++	struct nand_chip *this;
++	struct mtd_info *mtd;
++	struct flash_platform_data *pdata = pdev->dev.platform_data;
++	int nr_parts;
++	struct resource *res;
++	struct mxc_mtd_s *mxc_nand_data;
++	struct clk *clk;
++	void __iomem *nfc_axi_base;
++	void __iomem *nfc_ip_base;
++
++	if (!pdata) {
++		dev_err(&pdev->dev, "No platform_data\n");
++		return -ENODEV;
++	}
++
++	/* Allocate memory for MTD device structure and private data */
++	mxc_nand_data = kzalloc(sizeof(struct mxc_mtd_s), GFP_KERNEL);
++	if (!mxc_nand_data) {
++		printk(KERN_ERR "%s: failed to allocate mtd_info\n",
++		       __FUNCTION__);
++		return -ENOMEM;
++	}
++
++	/* allocate data buffer */
++	if (mxc_alloc_buf(mxc_nand_data)) {
++		err = -ENOMEM;
++		goto out;
++	}
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res) {
++		dev_err(&pdev->dev, "no memory resource\n");
++		err = -ENODEV;
++		goto out1;
++	}
++	if (!request_mem_region(res->start, resource_size(res), DRV_NAME)) {
++		err = -EBUSY;
++		goto out1;
++	}
++	mxc_nand_data->res_ip = res;
++
++	nfc_ip_base = ioremap(res->start, resource_size(res));
++	if (nfc_ip_base == NULL) {
++		dev_err(&pdev->dev, "Failed to ioremap %08lx..%08lx\n",
++			(unsigned long)res->start, (unsigned long)res->end);
++		err = -ENOMEM;
++		goto out2;
++	}
++	DBG(0, "%s: %08lx..%08lx remapped to %p\n", __FUNCTION__,
++	    (unsigned long)res->start, (unsigned long)res->end,
++	    nfc_ip_base);
++
++	mxc_nand_data->reg_base = nfc_ip_base;
++	mxc_nand_data->main_buf = mxc_nand_data->reg_base + MAIN_AREA0;
++	mxc_nand_data->spare_buf = mxc_nand_data->reg_base + SPARE_AREA0;
++
++	DBG(1, "%s: reg_base=%p\n", __FUNCTION__, mxc_nand_data->reg_base);
++	DBG(1, "%s: main_buf=%p\n", __FUNCTION__, mxc_nand_data->main_buf);
++	DBG(1, "%s: spare_buf=%p\n", __FUNCTION__, mxc_nand_data->spare_buf);
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (res) {
++		if (!request_mem_region(res->start, resource_size(res), DRV_NAME)) {
++			err = -EBUSY;
++			goto out3;
++		}
++		nfc_axi_base = ioremap(res->start, resource_size(res));
++		if (nfc_axi_base == NULL) {
++			dev_err(&pdev->dev, "Failed to ioremap %08lx..%08lx\n",
++				(unsigned long)res->start, (unsigned long)res->end);
++			err = -ENOMEM;
++			goto out4;
++		}
++		mxc_nand_data->res_axi = res;
++		DBG(0, "%s: %08lx..%08lx remapped to %p\n", __FUNCTION__,
++		    (unsigned long)res->start, (unsigned long)res->end,
++		    nfc_axi_base);
++		mxc_nand_data->axi_base = nfc_axi_base;
++	}
++
++	err = platform_get_irq(pdev, 0);
++	if (err < 0) {
++		dev_err(&pdev->dev, "Failed to get IRQ\n");
++		goto out5;
++	}
++	mxc_nand_data->irq = err;
++	DBG(0, "%s: IRQ=%d\n", __FUNCTION__, mxc_nand_data->irq);
++
++	/* init the nfc */
++	mxc_nfc_init(mxc_nand_data);
++
++	mxc_nand_data->dev = &pdev->dev;
++	/* structures must be linked */
++	this = &mxc_nand_data->nand;
++	mtd = &mxc_nand_data->mtd;
++	mtd->priv = this;
++	mtd->owner = THIS_MODULE;
++
++	this->priv = mxc_nand_data;
++	this->cmdfunc = mxc_nand_command;
++	this->select_chip = mxc_nand_select_chip;
++	this->read_byte = mxc_nand_read_byte;
++	this->read_word = mxc_nand_read_word;
++	this->write_buf = mxc_nand_write_buf;
++	this->read_buf = mxc_nand_read_buf;
++	this->verify_buf = mxc_nand_verify_buf;
++	this->scan_bbt = mxc_nand_scan_bbt;
++
++	/* NAND bus width determines access funtions used by upper layer */
++	if (pdata->width == 2) {
++		this->read_byte = mxc_nand_read_byte16;
++		this->options |= NAND_BUSWIDTH_16;
++		NFC_SET_NFMS(1 << NFMS_NF_DWIDTH);
++	} else {
++		NFC_SET_NFMS(0);
++	}
++
++	clk = clk_get(&pdev->dev, "nfc_clk");
++	if (IS_ERR(clk)) {
++		dev_err(&pdev->dev, "Failed to get nfc_clk: %ld\n",
++			PTR_ERR(clk));
++		err = PTR_ERR(clk);
++		goto out6;
++	}
++	mxc_nand_data->clk = clk;
++	clk_enable(clk);
++	mxc_nand_data->clk_act = 1;
++
++	init_waitqueue_head(&mxc_nand_data->irq_waitq);
++	err = request_irq(mxc_nand_data->irq, mxc_nfc_irq, 0, "mxc_nd",
++			  mxc_nand_data);
++	if (err) {
++		goto out7;
++	}
++
++	DBG(0, "%s: Init GPIOs\n", __FUNCTION__);
++	/* config the gpio */
++	if (pdata->init) {
++		err = pdata->init();
++		if (err) {
++			printk(KERN_ERR "%s: Failed to init GPIOs: %d\n",
++			       __FUNCTION__, err);
++			goto out8;
++		}
++	}
++
++	DBG(0, "%s: Resetting NAND chip\n", __FUNCTION__);
++	/* Reset NAND */
++	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
++
++	/* Scan to find existence of the device */
++	err = nand_scan_ident(mtd, 1);
++	if (err) {
++		DEBUG(MTD_DEBUG_LEVEL0,
++		      "MXC_ND: Unable to find any NAND device.\n");
++		goto out9;
++	}
++
++	if (IS_2K_PAGE_NAND) {
++		DBG(0, "%s: Using 2k ecc layout\n", __FUNCTION__);
++		this->ecc.layout = &nand_hw_eccoob_2k;
++	} else if (IS_4K_PAGE_NAND) {
++		DBG(0, "%s: Using 4k ecc layout\n", __FUNCTION__);
++		this->ecc.layout = &nand_hw_eccoob_4k;
++	} else {
++		DBG(0, "%s: Using 512b ecc layout\n", __FUNCTION__);
++		this->ecc.layout = &nand_hw_eccoob_512;
++	}
++	if (hardware_ecc) {
++		this->ecc.read_page = mxc_nand_read_page;
++		this->ecc.write_page = mxc_nand_write_page;
++		this->ecc.read_oob = mxc_nand_read_oob;
++		this->ecc.calculate = mxc_nand_calculate_ecc;
++		this->ecc.hwctl = mxc_nand_enable_hwecc;
++		this->ecc.correct = mxc_nand_correct_data;
++		this->ecc.mode = NAND_ECC_HW;
++		this->ecc.size = 512;
++		this->ecc.bytes = 9;
++		nfc_write_reg(mxc_nand_data,
++			      (nfc_read_reg(mxc_nand_data, REG_NFC_ECC_EN) | NFC_ECC_EN),
++			      REG_NFC_ECC_EN);
++	} else {
++		this->ecc.mode = NAND_ECC_SOFT;
++		nfc_write_reg(mxc_nand_data,
++			      (nfc_read_reg(mxc_nand_data, REG_NFC_ECC_EN) & ~NFC_ECC_EN),
++			      REG_NFC_ECC_EN);
++	}
++
++	DBG(0, "%s: Scanning for NAND devices\n", __FUNCTION__);
++	err = nand_scan_tail(mtd);
++	if (err) {
++		goto out9;
++	}
++
++	printk(KERN_INFO "MXC NAND V2 driver %d bit bus width %s ECC with %u/%u byte\n",
++	       pdata->width * 8, hardware_ecc ? "HW" : "SW",
++	       this->ecc.bytes, this->ecc.size);
++
++	/* Register the partitions */
++#ifdef CONFIG_MTD_PARTITIONS
++	nr_parts =
++	    parse_mtd_partitions(mtd, part_probes, &mxc_nand_data->parts, 0);
++	if (nr_parts > 0)
++		add_mtd_partitions(mtd, mxc_nand_data->parts, nr_parts);
++	else if (pdata->parts)
++		add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
++	else
++#endif
++	{
++		pr_info("Registering %s as whole device\n", mtd->name);
++		add_mtd_device(mtd);
++	}
++
++	platform_set_drvdata(pdev, mtd);
++	return 0;
++
++ out9:
++	if (pdata->exit)
++		pdata->exit();
++ out8:
++	free_irq(mxc_nand_data->irq, mxc_nand_data);
++ out7:
++	clk_disable(clk);
++	clk_put(clk);
++ out6:
++	mxc_free_buf(mxc_nand_data);
++ out5:
++	if (mxc_nand_data->axi_base)
++		iounmap(mxc_nand_data->axi_base);
++ out4:
++	if (mxc_nand_data->res_axi)
++		release_mem_region(mxc_nand_data->res_axi->start,
++			   resource_size(mxc_nand_data->res_axi));
++ out3:
++	iounmap(mxc_nand_data->reg_base);
++ out2:
++	release_mem_region(mxc_nand_data->res_ip->start,
++			   resource_size(mxc_nand_data->res_ip));
++ out1:
++	mxc_free_buf(mxc_nand_data);
++ out:
++	kfree(mxc_nand_data);
++	return err;
++}
++
++ /*!
++  * Dissociates the driver from the device.
++  *
++  * @param   pdev  the device structure used to give information on which
++  *
++  * @return  The function always returns 0.
++  */
++
++static int __exit mxcnd_remove(struct platform_device *pdev)
++{
++	struct mtd_info *mtd = platform_get_drvdata(pdev);
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	struct flash_platform_data *pdata = pdev->dev.platform_data;
++
++	if (pdata->exit)
++		pdata->exit();
++
++	nand_release(mtd);
++
++	free_irq(mxc_nand_data->irq, mxc_nand_data);
++	clk_disable(mxc_nand_data->clk);
++	clk_put(mxc_nand_data->clk);
++
++	iounmap(mxc_nand_data->reg_base);
++	release_mem_region(mxc_nand_data->res_ip->start,
++			   resource_size(mxc_nand_data->res_ip));
++	if (mxc_nand_data->res_axi) {
++		iounmap(mxc_nand_data->axi_base);
++		release_mem_region(mxc_nand_data->res_axi->start,
++				   resource_size(mxc_nand_data->res_axi));
++	}
++	mxc_free_buf(mxc_nand_data);
++	kfree(mxc_nand_data);
++	return 0;
++}
++
++#ifdef CONFIG_PM
++/*!
++ * This function is called to put the NAND in a low power state. Refer to the
++ * document driver-model/driver.txt in the kernel source tree for more
++ * information.
++ *
++ * @param   pdev  the device information structure
++ *
++ * @param   state the power state the device is entering
++ *
++ * @return  The function returns 0 on success and a negative errno value on failure
++ */
++
++static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	int ret;
++	struct mtd_info *mtd = platform_get_drvdata(pdev);
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++
++	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND2 : NAND suspend\n");
++	ret = mtd->suspend(mtd);
++	if (ret == 0) {
++		/* Disable the NFC clock */
++		clk_disable(mxc_nand_data->clk);
++	}
++	return ret;
++}
++
++/*!
++ * This function is called to bring the NAND back from a low power state. Refer
++ * to the document driver-model/driver.txt in the kernel source tree for more
++ * information.
++ *
++ * @param   pdev  the device information structure
++ *
++ * @return  The function returns 0 on success and a negative errno value on failure
++ */
++static int mxcnd_resume(struct platform_device *pdev)
++{
++	struct mtd_info *mtd = platform_get_drvdata(pdev);
++	struct nand_chip *nand_chip = mtd->priv;
++	struct mxc_mtd_s *mxc_nand_data = nand_chip->priv;
++	int ret = 0;
++
++	DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND2 : NAND resume\n");
++	/* Enable the NFC clock */
++	clk_enable(mxc_nand_data->clk);
++
++	mtd->resume(mtd);
++
++	return ret;
++}
++
++#else
++#define mxcnd_suspend   NULL
++#define mxcnd_resume    NULL
++#endif				/* CONFIG_PM */
++
++/*!
++ * This structure contains pointers to the power management callback functions.
++ */
++static struct platform_driver mxcnd_driver = {
++	.driver = {
++		.name = DRV_NAME,
++	},
++	.probe = mxcnd_probe,
++	.remove = __exit_p(mxcnd_remove),
++	.suspend = mxcnd_suspend,
++	.resume = mxcnd_resume,
++};
++
++/*!
++ * Main initialization routine
++ * @return  0 if successful; non-zero otherwise
++ */
++static int __init mxc_nd_init(void)
++{
++	int ret;
++
++	/* Register the device driver structure. */
++	ret = platform_driver_register(&mxcnd_driver);
++	if (ret != 0) {
++		printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
++	}
++	return ret;
++}
++
++/*!
++ * Clean up routine
++ */
++static void __exit mxc_nd_cleanup(void)
++{
++	/* Unregister the device structure */
++	platform_driver_unregister(&mxcnd_driver);
++}
++
++module_init(mxc_nd_init);
++module_exit(mxc_nd_cleanup);
++
++MODULE_AUTHOR("Freescale Semiconductor, Inc.");
++MODULE_DESCRIPTION("MXC NAND MTD driver Version 2-5");
++MODULE_LICENSE("GPL");
+diff -urNp linux-2.6.30-rc4/drivers/mtd/nand/mxc_nd2.h linux-2.6.30-rc4-karo/drivers/mtd/nand/mxc_nd2.h
+--- linux-2.6.30-rc4/drivers/mtd/nand/mxc_nd2.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/drivers/mtd/nand/mxc_nd2.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,699 @@
++/*
++ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
++
++/*
++ * The code contained herein is licensed under the GNU General Public
++ * License. You may obtain a copy of the GNU General Public License
++ * Version 2 or later at the following locations:
++ *
++ * http://www.opensource.org/licenses/gpl-license.html
++ * http://www.gnu.org/copyleft/gpl.html
++ */
++
++/*!
++ * @file mxc_nd2.h
++ *
++ * @brief This file contains the NAND Flash Controller register information.
++ *
++ *
++ * @ingroup NAND_MTD
++ */
++
++#ifndef __MXC_ND2_H__
++#define __MXC_ND2_H__
++
++#include <mach/hardware.h>
++
++#define IS_2K_PAGE_NAND         ((mtd->writesize / num_of_interleave) \
++						== NAND_PAGESIZE_2KB)
++#define IS_4K_PAGE_NAND         ((mtd->writesize / num_of_interleave) \
++						== NAND_PAGESIZE_4KB)
++#define IS_LARGE_PAGE_NAND      ((mtd->writesize / num_of_interleave) > 512)
++
++#define GET_NAND_OOB_SIZE	(mtd->oobsize / num_of_interleave)
++
++#define NAND_PAGESIZE_2KB	2048
++#define NAND_PAGESIZE_4KB	4096
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3
++/*
++ * For V3 NFC registers Definition
++ */
++/* AXI Bus Mapped */
++#define NFC_AXI_BASE_ADDR		NFC_BASE_ADDR_AXI
++
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_1)	/* mx37 */
++#define MXC_INT_NANDFC			MXC_INT_EMI
++#define NFC_FLASH_ADDR_CMD		(nfc_axi_base + 0x1E00)
++#define NFC_CONFIG1			(nfc_axi_base + 0x1E04)
++#define NFC_ECC_STATUS_RESULT		(nfc_axi_base + 0x1E08)
++#define LAUNCH_NFC			(nfc_axi_base + 0x1E0c)
++#define NFC_WRPROT			0x00
++#define NFC_WRPROT_UNLOCK_BLK_ADD0	0x04
++#define NFC_CONFIG2			0x14
++#define NFC_IPC				0x18
++#elif defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)	/* mx51 */
++#define MXC_INT_NANDFC			MXC_INT_NFC
++#define NFC_AUTO_MODE_ENABLE
++#define NFC_FLASH_CMD			(nfc_axi_base + 0x1E00)
++#define NFC_FLASH_ADDR0      		(nfc_axi_base + 0x1E04)
++#define NFC_FLASH_ADDR8			(nfc_axi_base + 0x1E24)
++#define NFC_CONFIG1         		(nfc_axi_base + 0x1E34)
++#define NFC_ECC_STATUS_RESULT		(nfc_axi_base + 0x1E38)
++#define NFC_ECC_STATUS_SUM		(nfc_axi_base + 0x1E3C)
++#define LAUNCH_NFC			(nfc_axi_base + 0x1E40)
++#define NFC_WRPROT			0x00
++#define NFC_WRPROT_UNLOCK_BLK_ADD0	0x04
++#define NFC_CONFIG2			0x24
++#define NFC_CONFIG3			0x28
++#define NFC_IPC				0x2C
++#else				/* skye */
++#define NFC_FLASH_ADDR_CMD		(nfc_axi_base + 0xE00)
++#define NFC_CONFIG1			(nfc_axi_base + 0xE04)
++#define NFC_ECC_STATUS_RESULT		(nfc_axi_base + 0xE08)
++#define LAUNCH_NFC			(nfc_axi_base + 0xE0C)
++#define NFC_WRPROT			0x00
++#define NFC_WRPROT_UNLOCK_BLK_ADD0	0x04
++#define NFC_CONFIG2			0x14
++#define NFC_IPC				0x18
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_1 */
++/*!
++ * Addresses for NFC RAM BUFFER Main area 0
++ */
++#define MAIN_AREA0        		((u16 *)(nfc_axi_base + 0x000))
++#define MAIN_AREA1        		((u16 *)(nfc_axi_base + 0x200))
++
++/*!
++ * Addresses for NFC SPARE BUFFER Spare area 0
++ */
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_1) ||	\
++    defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)
++#define SPARE_AREA0       		((u16 *)(nfc_axi_base + 0x1000))
++#define SPARE_LEN			64
++#define SPARE_COUNT			8
++#define SPARE_SIZE			(SPARE_LEN * SPARE_COUNT)
++#else
++#define SPARE_AREA0       		((u16 *)(nfc_axi_base + 0x800))
++#define SPARE_LEN			16
++#define SPARE_COUNT			4
++#define SPARE_SIZE			(SPARE_LEN * SPARE_COUNT)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_1 */
++
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_1) ||	\
++    defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)
++#define NFC_SPAS_WIDTH 8
++#define NFC_SPAS_SHIFT 16
++
++#define IS_4BIT_ECC \
++( \
++	cpu_is_mx51_rev(CHIP_REV_2_0) == 1 ? \
++		!((raw_read(NFC_CONFIG2) & NFC_ECC_MODE_4) >> 6) : \
++		((raw_read(NFC_CONFIG2) & NFC_ECC_MODE_4) >> 6) \
++)
++
++#define NFC_SET_SPAS(v)			\
++	raw_write((((raw_read(NFC_CONFIG2) & \
++	NFC_FIELD_RESET(NFC_SPAS_WIDTH, NFC_SPAS_SHIFT)) | ((v) << 16))), \
++	NFC_CONFIG2)
++
++#define NFC_SET_ECC_MODE(v)						\
++do {									\
++	if (cpu_is_mx51_rev(CHIP_REV_2_0) == 1) {			\
++		if ((v) == NFC_SPAS_218 || (v) == NFC_SPAS_112)		\
++			raw_write(((raw_read(NFC_CONFIG2) &		\
++					NFC_ECC_MODE_MASK) |		\
++					NFC_ECC_MODE_4), NFC_CONFIG2);	\
++		else							\
++			raw_write(((raw_read(NFC_CONFIG2) &		\
++					NFC_ECC_MODE_MASK) &		\
++					~NFC_ECC_MODE_4), NFC_CONFIG2);	\
++	} else {							\
++		if ((v) == NFC_SPAS_218 || (v) == NFC_SPAS_112)		\
++			raw_write(((raw_read(NFC_CONFIG2) &		\
++					NFC_ECC_MODE_MASK) &		\
++					~NFC_ECC_MODE_4), NFC_CONFIG2);	\
++		else							\
++			raw_write(((raw_read(NFC_CONFIG2) &		\
++					NFC_ECC_MODE_MASK) |		\
++					NFC_ECC_MODE_4), NFC_CONFIG2);	\
++	}								\
++} while (0)
++
++#define WRITE_NFC_IP_REG(val,reg)						\
++	do {									\
++		nfc_write_reg(mxc_nand_data, NFC_IPC_CREQ, NFC_IPC);		\
++		while (!(nfc_read_reg(mxc_nand_data, NFC_IPC) & NFC_IPC_ACK));	\
++		nfc_write_reg(mxc_nand_data, val, reg);				\
++		nfc_write_reg(mxc_nand_data, 0, NFC_IPC);			\
++	} while(0)
++#else
++#define IS_4BIT_ECC			1
++#define NFC_SET_SPAS(v)
++#define NFC_SET_ECC_MODE(v)
++#define NFC_SET_NFMS(v)			(NFMS |= (v))
++
++#define WRITE_NFC_IP_REG(val,reg)				\
++	nfc_write_reg(mxc_nand_data, val, REG_NFC_OPS_STAT)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_1 */
++
++#define GET_NFC_ECC_STATUS() nfc_read_reg(mxc_nand_data, REG_NFC_ECC_STATUS_RESULT);
++
++/*!
++ * Set 1 to specific operation bit, rest to 0 in LAUNCH_NFC Register for
++ * Specific operation
++ */
++#define NFC_CMD            		0x1
++#define NFC_ADDR           		0x2
++#define NFC_INPUT          		0x4
++#define NFC_OUTPUT         		0x8
++#define NFC_ID             		0x10
++#define NFC_STATUS         		0x20
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3_2	/* mx51 */
++#define NFC_AUTO_PROG 			0x40
++#define NFC_AUTO_READ           	0x80
++#define NFC_AUTO_ERASE          	0x200
++#define NFC_COPY_BACK_0			0x400
++#define NFC_COPY_BACK_1         	0x800
++#define NFC_AUTO_STATE          	0x1000
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++
++/* Bit Definitions for NFC_IPC*/
++#define NFC_OPS_STAT			(1 << 31)
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3_2	/* mx51 */
++#define NFC_OP_DONE			(1 << 30)
++#define NFC_RB				(1 << 28)
++#define NFC_PS_WIDTH 			2
++#define NFC_PS_SHIFT 			0
++#define NFC_PS_512	 		0
++#define NFC_PS_2K	 		1
++#define NFC_PS_4K    			2
++#else
++#define NFC_RB				(1 << 29)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++
++#define NFC_ONE_CYCLE			(1 << 2)
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3_2	/* mx51 */
++#define NFC_INT_MSK			(1 << 15)
++#define NFC_AUTO_PROG_DONE_MSK 		(1 << 14)
++#define NFC_NUM_ADDR_PHASE1_WIDTH   	2
++#define NFC_NUM_ADDR_PHASE1_SHIFT  	12
++
++#define NFC_NUM_ADDR_PHASE0_WIDTH 	1
++#define NFC_NUM_ADDR_PHASE0_SHIFT  	5
++
++#define NFC_ONE_LESS_PHASE1 		0
++#define NFC_TWO_LESS_PHASE1 		1
++
++#define NFC_FLASH_ADDR_SHIFT		0
++#else
++#define NFC_INT_MSK			(1 << 4)
++#define NFC_BIG				(1 << 5)
++#define NFC_FLASH_ADDR_SHIFT		16
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++
++#define NFC_UNLOCK_END_ADDR_SHIFT	16
++
++/* Bit definition for NFC_CONFIGRATION_1 */
++#define NFC_SP_EN			(1 << 0)
++#define NFC_CE				(1 << 1)
++#define NFC_RST				(1 << 2)
++#define NFC_ECC_EN			(1 << 3)
++
++#define NFC_FIELD_RESET(width, shift) ~(((1 << (width)) - 1) << (shift))
++
++#define NFC_RBA_SHIFT       		4
++
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_1) ||	\
++    defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)	/* mx51 */
++#define NFC_RBA_WIDTH			3
++#else
++#define NFC_RBA_WIDTH			2
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_1 */
++
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)	/* mx51 */
++#define NFC_ITERATION_SHIFT 8
++#define NFC_ITERATION_WIDTH 4
++#define NFC_ACTIVE_CS_SHIFT 12
++#define NFC_ACTIVE_CS_WIDTH 3
++/* bit definition for CONFIGRATION3 */
++#define NFC_NO_SDMA			(1 << 20)
++#define NFC_FMP_SHIFT 			16
++#define NFC_FMP_WIDTH			4
++#define NFC_RBB_MODE			(1 << 15)
++#define NFC_NUM_OF_DEVICES_SHIFT 	12
++#define NFC_NUM_OF_DEVICES_WIDTH 	4
++#define NFC_DMA_MODE_SHIFT 		11
++#define NFC_DMA_MODE_WIDTH  		1
++#define NFC_SBB_SHIFT 			8
++#define NFC_SBB_WIDTH 			3
++#define NFC_BIG				(1 << 7)
++#define NFC_SB2R_SHIFT 			4
++#define NFC_SB2R_WIDTH			3
++#define NFC_FW_SHIFT    		3
++#define NFC_FW_WIDTH 			1
++#define NFC_TOO				(1 << 2)
++#define NFC_ADD_OP_SHIFT 		0
++#define NFC_ADD_OP_WIDTH		2
++#define NFC_FW_8 			1
++#define NFC_FW_16			0
++#define NFC_ST_CMD_SHITF		24
++#define NFC_ST_CMD_WIDTH		8
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++
++#define NFC_PPB_32			(0 << 7)
++#define NFC_PPB_64			(1 << 7)
++#define NFC_PPB_128			(2 << 7)
++#define NFC_PPB_256			(3 << 7)
++#define NFC_PPB_RESET			~(3 << 7)
++
++#define NFC_BLS_LOCKED			(0 << 16)
++#define NFC_BLS_LOCKED_DEFAULT		(1 << 16)
++#define NFC_BLS_UNLOCKED		(2 << 16)
++#define NFC_BLS_RESET			~(3 << 16)
++#define NFC_WPC_LOCK_TIGHT		1
++#define NFC_WPC_LOCK			(1 << 1)
++#define NFC_WPC_UNLOCK			(1 << 2)
++#define NFC_WPC_RESET			~7
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_1) || \
++    defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)
++#define NFC_ECC_MODE_4    		(1 << 6)
++#define NFC_ECC_MODE_MASK 		~(1 << 6)
++#define NFC_SPAS_16			8
++#define NFC_SPAS_64		 	32
++#define NFC_SPAS_128			64
++#define NFC_SPAS_112			56
++#define NFC_SPAS_218		 	109
++#define NFC_IPC_CREQ			(1 << 0)
++#define NFC_IPC_ACK			(1 << 1)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_1 */
++
++#define REG_NFC_OPS_STAT		NFC_IPC
++#define REG_NFC_INTERRUPT		NFC_CONFIG2
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3_2
++#define REG_NFC_FLASH_ADDR		NFC_FLASH_ADDR0
++#define REG_NFC_FLASH_CMD		NFC_FLASH_CMD
++#else
++#define REG_NFC_FLASH_ADDR		NFC_FLASH_ADDR_CMD
++#define REG_NFC_FLASH_CMD		NFC_FLASH_ADDR_CMD
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++#define REG_NFC_OPS			LAUNCH_NFC
++#define REG_NFC_SET_RBA			NFC_CONFIG1
++#define REG_NFC_RB			NFC_IPC
++#define REG_NFC_ECC_EN			NFC_CONFIG2
++#define REG_NFC_ECC_STATUS_RESULT	NFC_ECC_STATUS_RESULT
++#define REG_NFC_CE			NFC_CONFIG1
++#define REG_NFC_RST			NFC_CONFIG1
++#define REG_NFC_PPB			NFC_CONFIG2
++#define REG_NFC_SP_EN			NFC_CONFIG1
++#define REG_NFC_BLS			NFC_WRPROT
++#define REG_UNLOCK_BLK_ADD0		NFC_WRPROT_UNLOCK_BLK_ADD0
++#define REG_UNLOCK_BLK_ADD1		NFC_WRPROT_UNLOCK_BLK_ADD1
++#define REG_UNLOCK_BLK_ADD2		NFC_WRPROT_UNLOCK_BLK_ADD2
++#define REG_UNLOCK_BLK_ADD3		NFC_WRPROT_UNLOCK_BLK_ADD3
++#define REG_NFC_WPC			NFC_WRPROT
++#define REG_NFC_ONE_CYCLE		NFC_CONFIG2
++
++/* NFC V3 Specific MACRO function definitions */
++#define raw_write(v,a)		__raw_writel(v,a)
++#define raw_read(a)		__raw_readl(a)
++
++/* Explicitly ack ops status (if any), before issuing any command  */
++#define ACK_OPS										\
++	nfc_write_reg(mxc_nand_data,							\
++		      (nfc_read_reg(mxc_nand_data, REG_NFC_OPS_STAT) & ~NFC_OPS_STAT),	\
++		      REG_NFC_OPS_STAT)
++
++/* Set RBA buffer id*/
++#define NFC_SET_RBA(val)							\
++	nfc_write_reg(mxc_nand_data,						\
++		      (nfc_read_reg(mxc_nand_data, REG_NFC_SET_RBA) &		\
++		       (NFC_FIELD_RESET(NFC_RBA_WIDTH, NFC_RBA_SHIFT))) |	\
++		      ((val) << NFC_RBA_SHIFT), REG_NFC_SET_RBA)
++
++#define NFC_SET_PS(val)							\
++	nfc_write_reg(mxc_nand_data,					\
++		      (nfc_read_reg(mxc_nand_data, NFC_CONFIG2) &	\
++		       (NFC_FIELD_RESET(NFC_PS_WIDTH, NFC_PS_SHIFT))) |	\
++		      ((val) << NFC_PS_SHIFT), NFC_CONFIG2)
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3_2
++#define UNLOCK_ADDR(start_addr,end_addr)		\
++{							\
++	int i = 0;					\
++	for (; i < NAND_MAX_CHIPS; i++)			\
++	nfc_write_reg(mxc_nand_data, start_addr |	\
++	(end_addr << NFC_UNLOCK_END_ADDR_SHIFT),	\
++	REG_UNLOCK_BLK_ADD0 + (i << 2));		\
++}
++
++#define NFC_SET_NFC_ACTIVE_CS(val)							\
++	nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG1) &	\
++	(NFC_FIELD_RESET(NFC_ACTIVE_CS_WIDTH, NFC_ACTIVE_CS_SHIFT))) |			\
++	((val) << NFC_ACTIVE_CS_SHIFT), NFC_CONFIG1)
++
++#define NFC_GET_MAXCHIP_SP() 		8
++
++#else
++#define UNLOCK_ADDR(start_addr,end_addr)				\
++	nfc_write_reg(mxc_nand_data, start_addr |			\
++	(end_addr << NFC_UNLOCK_END_ADDR_SHIFT), REG_UNLOCK_BLK_ADD0)
++
++#define NFC_SET_NFC_ACTIVE_CS(val)
++#define NFC_GET_MAXCHIP_SP() 		1
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++
++#define NFC_SET_BLS(val) ((nfc_read_reg(mxc_nand_data, REG_NFC_BLS) & NFC_BLS_RESET) | val)
++#define NFC_SET_WPC(val) ((nfc_read_reg(mxc_nand_data, REG_NFC_WPC) & NFC_WPC_RESET) | val)
++#define CHECK_NFC_RB    nfc_read_reg(mxc_nand_data, REG_NFC_RB) & NFC_RB
++
++#if defined(CONFIG_ARCH_MXC_HAS_NFC_V3_2)
++#define NFC_SET_NFC_NUM_ADDR_PHASE1(val)						\
++	nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG2) &	\
++	(NFC_FIELD_RESET(NFC_NUM_ADDR_PHASE1_WIDTH,					\
++	NFC_NUM_ADDR_PHASE1_SHIFT))) |							\
++	((val) << NFC_NUM_ADDR_PHASE1_SHIFT), NFC_CONFIG2);
++
++#define NFC_SET_NFC_NUM_ADDR_PHASE0(val)						\
++	nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG2) &	\
++	(NFC_FIELD_RESET(NFC_NUM_ADDR_PHASE0_WIDTH,					\
++	NFC_NUM_ADDR_PHASE0_SHIFT))) |							\
++	((val) << NFC_NUM_ADDR_PHASE0_SHIFT), NFC_CONFIG2);
++
++#define NFC_SET_NFC_ITERATION(val)							\
++	nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG1) &	\
++	(NFC_FIELD_RESET(NFC_ITERATION_WIDTH, NFC_ITERATION_SHIFT))) |			\
++	((val) << NFC_ITERATION_SHIFT), NFC_CONFIG1);
++
++#define NFC_SET_FW(val)									\
++	nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG3) &	\
++	(NFC_FIELD_RESET(NFC_FW_WIDTH, NFC_FW_SHIFT))) |				\
++	((val) << NFC_FW_SHIFT), NFC_CONFIG3);
++
++#define NFC_SET_NUM_OF_DEVICE(val)							\
++	nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG3) &	\
++	(NFC_FIELD_RESET(NFC_NUM_OF_DEVICES_WIDTH,					\
++	NFC_NUM_OF_DEVICES_SHIFT))) |							\
++	((val) << NFC_NUM_OF_DEVICES_SHIFT), NFC_CONFIG3);
++
++#define NFC_SET_ADD_OP_MODE(val)							\
++	 nfc_write_reg(mxc_nand_data, (nfc_read_reg(mxc_nand_data, NFC_CONFIG3) &	\
++	(NFC_FIELD_RESET(NFC_ADD_OP_WIDTH, NFC_ADD_OP_SHIFT))) |			\
++	((val) << NFC_ADD_OP_SHIFT), NFC_CONFIG3);
++
++#define NFC_SET_ADD_CS_MODE(val)			\
++{							\
++	NFC_SET_ADD_OP_MODE(val);			\
++	NFC_SET_NUM_OF_DEVICE(this->numchips - 1);	\
++}
++
++#define NFC_SET_ST_CMD(val) \
++	nfc_write_reg((raw_read(NFC_CONFIG2) & \
++	(NFC_FIELD_RESET(NFC_ST_CMD_WIDTH, \
++	NFC_ST_CMD_SHITF))) | \
++	((val) << NFC_ST_CMD_SHITF), NFC_CONFIG2);
++
++#define NFMS_NF_DWIDTH		0
++#define NFMS_NF_PG_SZ		1
++#define NFC_CMD_1_SHIFT		8
++
++#define NUM_OF_ADDR_CYCLE	(fls(g_page_mask) >> 3)
++
++/*should set the fw,ps,spas,ppb*/
++#define NFC_SET_NFMS(v)	\
++do {	\
++	NFC_SET_FW(NFC_FW_8);	\
++	if (((v) & (1 << NFMS_NF_DWIDTH)))	\
++		NFC_SET_FW(NFC_FW_16);	\
++	if (((v) & (1 << NFMS_NF_PG_SZ))) {	\
++		if (IS_2K_PAGE_NAND) {	\
++			NFC_SET_PS(NFC_PS_2K);	\
++			NFC_SET_NFC_NUM_ADDR_PHASE1(NUM_OF_ADDR_CYCLE); \
++			NFC_SET_NFC_NUM_ADDR_PHASE0(NFC_TWO_LESS_PHASE1); \
++		} else if (IS_4K_PAGE_NAND) {       \
++			NFC_SET_PS(NFC_PS_4K);	\
++			NFC_SET_NFC_NUM_ADDR_PHASE1(NUM_OF_ADDR_CYCLE); \
++			NFC_SET_NFC_NUM_ADDR_PHASE0(NFC_TWO_LESS_PHASE1); \
++		} else {	\
++			NFC_SET_PS(NFC_PS_512);	\
++			NFC_SET_NFC_NUM_ADDR_PHASE1(NUM_OF_ADDR_CYCLE - 1); \
++			NFC_SET_NFC_NUM_ADDR_PHASE0(NFC_ONE_LESS_PHASE1); \
++		}	\
++		NFC_SET_ADD_CS_MODE(1); \
++		NFC_SET_SPAS(GET_NAND_OOB_SIZE >> 1);	\
++		NFC_SET_ECC_MODE(GET_NAND_OOB_SIZE >> 1); \
++		NFC_SET_ST_CMD(0x70); \
++		nfc_write_reg(raw_read(NFC_CONFIG3) | 1 << 20, NFC_CONFIG3); \
++	} \
++} while (0)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_2 */
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V3_1
++#define NFC_SET_NFMS(v)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3_1 */
++
++#define READ_PAGE(c)	send_read_page(c,0)
++#define PROG_PAGE(c) 	send_prog_page(c,0)
++
++#elif CONFIG_ARCH_MXC_HAS_NFC_V2
++
++/*
++ * For V1/V2 NFC registers Definition
++ */
++
++#define NFC_AXI_BASE_ADDR      		0x00
++/*
++ * Addresses for NFC registers
++ */
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define NFC_REG_BASE			0x1000
++#else
++#define NFC_REG_BASE			0x0000
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++#define NFC_BUF_SIZE            	(NFC_REG_BASE + 0xE00)
++#define NFC_BUF_ADDR            	(NFC_REG_BASE + 0xE04)
++#define NFC_FLASH_ADDR          	(NFC_REG_BASE + 0xE06)
++#define NFC_FLASH_CMD           	(NFC_REG_BASE + 0xE08)
++#define NFC_CONFIG              	(NFC_REG_BASE + 0xE0A)
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define NFC_ECC_STATUS_RESULT		(NFC_REG_BASE + 0xE0C)
++#define NFC_ECC_STATUS_RESULT_1		(NFC_REG_BASE + 0xE0C)
++#define NFC_ECC_STATUS_RESULT_2		(NFC_REG_BASE + 0xE0E)
++#define NFC_SPAS			(NFC_REG_BASE + 0xE10)
++#else
++#define NFC_ECC_STATUS_RESULT   	(NFC_REG_BASE + 0xE0C)
++#define NFC_RSLTMAIN_AREA       	(NFC_REG_BASE + 0xE0E)
++#define NFC_RSLTSPARE_AREA      	(NFC_REG_BASE + 0xE10)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++#define NFC_WRPROT              	(NFC_REG_BASE + 0xE12)
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define NFC_UNLOCKSTART_BLKADDR  	(NFC_REG_BASE + 0xE20)
++#define NFC_UNLOCKEND_BLKADDR    	(NFC_REG_BASE + 0xE22)
++#define NFC_UNLOCKSTART_BLKADDR1 	(NFC_REG_BASE + 0xE24)
++#define NFC_UNLOCKEND_BLKADDR1   	(NFC_REG_BASE + 0xE26)
++#define NFC_UNLOCKSTART_BLKADDR2 	(NFC_REG_BASE + 0xE28)
++#define NFC_UNLOCKEND_BLKADDR2   	(NFC_REG_BASE + 0xE2A)
++#define NFC_UNLOCKSTART_BLKADDR3 	(NFC_REG_BASE + 0xE2C)
++#define NFC_UNLOCKEND_BLKADDR3   	(NFC_REG_BASE + 0xE2E)
++#else
++#define NFC_UNLOCKSTART_BLKADDR  	(NFC_REG_BASE + 0xE14)
++#define NFC_UNLOCKEND_BLKADDR    	(NFC_REG_BASE + 0xE16)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++#define NFC_NF_WRPRST            	(NFC_REG_BASE + 0xE18)
++#define NFC_CONFIG1              	(NFC_REG_BASE + 0xE1A)
++#define NFC_CONFIG2              	(NFC_REG_BASE + 0xE1C)
++
++/*!
++ * Addresses for NFC RAM BUFFER Main area 0
++ */
++#define MAIN_AREA0      		0x000
++#define MAIN_AREA1      		0x200
++
++/*!
++ * Addresses for NFC SPARE BUFFER Spare area 0
++ */
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define SPARE_AREA0     		0x1000
++#define SPARE_LEN			64
++#define SPARE_COUNT			8
++#else
++#define SPARE_AREA0     		0x800
++#define SPARE_LEN       		16
++#define SPARE_COUNT     		4
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++#define SPARE_SIZE      		(SPARE_LEN * SPARE_COUNT)
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define REG_NFC_ECC_MODE	NFC_CONFIG1
++#define SPAS_SHIFT		0
++#define REG_NFC_SPAS		NFC_SPAS
++#define SPAS_MASK		0xFF00
++#define IS_4BIT_ECC								\
++	(!!(nfc_read_reg(mxc_nand_data, REG_NFC_ECC_MODE) & NFC_ECC_MODE_4))
++
++#define NFC_SET_SPAS(v)									\
++	nfc_write_reg(mxc_nand_data,							\
++		      ((nfc_read_reg(mxc_nand_data, REG_NFC_SPAS) & SPAS_MASK) |	\
++		       (((v) << SPAS_SHIFT))),						\
++			REG_NFC_SPAS)
++
++#define NFC_SET_ECC_MODE(v)									\
++do {												\
++	if ((v) == NFC_SPAS_218)  {								\
++		nfc_write_reg(mxc_nand_data,							\
++			      (nfc_read_reg(mxc_nand_data, REG_NFC_ECC_MODE) & ~NFC_ECC_MODE_4),\
++			       REG_NFC_ECC_MODE);						\
++	} else {										\
++		nfc_write_reg(mxc_nand_data,							\
++			      (nfc_read_reg(mxc_nand_data, REG_NFC_ECC_MODE) | NFC_ECC_MODE_4),	\
++			       REG_NFC_ECC_MODE);						\
++	}											\
++} while (0)
++
++#define NFC_SET_NFMS(v)							\
++do {									\
++	DBG(0, "Setting NFMS[%p:%08lx] to %08x | %08x\n", NFMS_REG,	\
++	    MXC_PHYS_ADDRESS(NFMS_REG), __raw_readl(NFMS_REG), v);	\
++	__raw_writel(__raw_readl(NFMS_REG) | (v), NFMS_REG);		\
++	if (((v) & (1 << NFMS_NF_PG_SZ))) {				\
++		NFC_SET_SPAS(GET_NAND_OOB_SIZE >> 1);			\
++		NFC_SET_ECC_MODE(GET_NAND_OOB_SIZE >> 1);		\
++	}								\
++} while (0)
++#else
++#define IS_4BIT_ECC			1
++#define NFC_SET_SPAS(v)
++#define NFC_SET_ECC_MODE(v)
++#define NFC_SET_NFMS(v)			(NFMS |= (v))
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++
++#define WRITE_NFC_IP_REG(val,reg)				\
++	nfc_write_reg(mxc_nand_data, val, REG_NFC_OPS_STAT)
++
++#define GET_NFC_ECC_STATUS() nfc_read_reg(mxc_nand_data, REG_NFC_ECC_STATUS_RESULT)
++
++/*!
++ * Set INT to 0, Set 1 to specific operation bit, rest to 0 in NFC_CONFIG2 Register for
++ * Specific operation
++ */
++#define NFC_CMD            		0x1
++#define NFC_ADDR           		0x2
++#define NFC_INPUT          		0x4
++#define NFC_OUTPUT         		0x8
++#define NFC_ID             		0x10
++#define NFC_STATUS         		0x20
++
++/* Bit Definitions */
++#define NFC_OPS_STAT			(1 << 15)
++#define NFC_SP_EN           		(1 << 2)
++#define NFC_ECC_EN          		(1 << 3)
++#define NFC_INT_MSK         		(1 << 4)
++#define NFC_BIG             		(1 << 5)
++#define NFC_RST             		(1 << 6)
++#define NFC_CE              		(1 << 7)
++#define NFC_ONE_CYCLE       		(1 << 8)
++#define NFC_BLS_LOCKED			0
++#define NFC_BLS_LOCKED_DEFAULT		1
++#define NFC_BLS_UNLOCKED		2
++#define NFC_WPC_LOCK_TIGHT		(1 << 0)
++#define NFC_WPC_LOCK			(1 << 1)
++#define NFC_WPC_UNLOCK			(1 << 2)
++#define NFC_FLASH_ADDR_SHIFT 		0
++#define NFC_UNLOCK_END_ADDR_SHIFT	0
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define NFC_ECC_MODE_4    		(1 << 0)
++#define NFC_SPAS_16			8
++#define NFC_SPAS_64			32
++#define NFC_SPAS_112			56
++#define NFC_SPAS_128			64
++#define NFC_SPAS_218			109
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++/* NFC Register Mapping */
++#define REG_NFC_OPS_STAT		NFC_CONFIG2
++#define REG_NFC_INTERRUPT		NFC_CONFIG1
++#define REG_NFC_FLASH_ADDR		NFC_FLASH_ADDR
++#define REG_NFC_FLASH_CMD		NFC_FLASH_CMD
++#define REG_NFC_OPS			NFC_CONFIG2
++#define REG_NFC_SET_RBA			NFC_BUF_ADDR
++#define REG_NFC_ECC_EN			NFC_CONFIG1
++#define REG_NFC_ECC_STATUS_RESULT  	NFC_ECC_STATUS_RESULT
++#define REG_NFC_CE			NFC_CONFIG1
++#define REG_NFC_SP_EN			NFC_CONFIG1
++#define REG_NFC_BLS			NFC_CONFIG
++#define REG_NFC_WPC			NFC_WRPROT
++#define REG_START_BLKADDR      		NFC_UNLOCKSTART_BLKADDR
++#define REG_END_BLKADDR        		NFC_UNLOCKEND_BLKADDR
++#define REG_NFC_RST			NFC_CONFIG1
++#define REG_NFC_ONE_CYCLE		NFC_CONFIG1
++
++/* NFC V1/V2 Specific MACRO functions definitions */
++
++#if defined(CONFIG_MTD_DEBUG)
++#define nfc_write_reg(c, v, r)		__nfc_reg_write(v, (c)->reg_base + r, #r, __FUNCTION__)
++static inline void __nfc_reg_write(u16 val, void __iomem *addr,
++				   const char *reg, const char *fn)
++{
++	DBG(3, "%s: Writing %04x to %s[%04lx]\n", fn, val, reg,
++	    (unsigned long)addr & 0x1fff);
++	__raw_writew(val, addr);
++}
++
++#define nfc_read_reg(c, r)		__nfc_reg_read((c)->reg_base + r, #r, __FUNCTION__)
++static inline u16 __nfc_reg_read(void __iomem *addr,
++				 const char *reg, const char *fn)
++{
++	u16 val;
++	val = __raw_readw(addr);
++	DBG(3, "%s: Read %04x from %s[%04lx]\n", fn, val, reg,
++	       (unsigned long)addr & 0x1fff);
++	return val;
++}
++#else
++#define nfc_read_reg(c, r)		__raw_readw((c)->reg_base + r)
++#define nfc_write_reg(c, v, r)		__raw_writew(v, (c)->reg_base + r)
++#endif /* CONFIG_MTD_DEBUG */
++
++#define NFC_SET_BLS(val)		(val)
++
++#define UNLOCK_ADDR(start_addr,end_addr)				\
++{									\
++	nfc_write_reg(mxc_nand_data, start_addr,REG_START_BLKADDR);	\
++        nfc_write_reg(mxc_nand_data, end_addr,REG_END_BLKADDR);		\
++}
++
++#define NFC_SET_NFC_ACTIVE_CS(val)
++#define NFC_GET_MAXCHIP_SP()		1
++#define NFC_SET_WPC(val)		(val)
++
++#define ACK_OPS
++#define NFC_SET_RBA(val) nfc_write_reg(mxc_nand_data, val, REG_NFC_SET_RBA);
++
++#ifdef CONFIG_ARCH_MXC_HAS_NFC_V2_1
++#define READ_PAGE(c)	send_read_page(c,0)
++#define PROG_PAGE(c) 	send_prog_page(c,0)
++#else
++#define READ_PAGE(c)				\
++do {						\
++	send_read_page(c,0);			\
++	send_read_page(c,1);			\
++	send_read_page(c,2);			\
++	send_read_page(c,3);			\
++} while (0)
++
++#define PROG_PAGE(c)				\
++do {						\
++	send_prog_page(c,0);			\
++	send_prog_page(c,1);			\
++	send_prog_page(c,2);			\
++	send_prog_page(c,3);			\
++} while (0)
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V2_1 */
++#define CHECK_NFC_RB		1
++
++#endif /* CONFIG_ARCH_MXC_HAS_NFC_V3 */
++
++#endif /* __MXC_ND2_H__ */
+diff -urNp linux-2.6.30-rc4/drivers/net/Kconfig linux-2.6.30-rc4-karo/drivers/net/Kconfig
+--- linux-2.6.30-rc4/drivers/net/Kconfig	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/net/Kconfig	2009-06-02 17:05:27.000000000 +0200
+@@ -1859,7 +1859,7 @@ config 68360_ENET
+ 
+ config FEC
+ 	bool "FEC ethernet controller (of ColdFire CPUs)"
+-	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27
++	depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || MACH_TX25
+ 	help
+ 	  Say Y here if you want to use the built-in 10/100 Fast ethernet
+ 	  controller on some Motorola ColdFire and Freescale i.MX processors.
+diff -urNp linux-2.6.30-rc4/drivers/net/fec.c linux-2.6.30-rc4-karo/drivers/net/fec.c
+--- linux-2.6.30-rc4/drivers/net/fec.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/net/fec.c	2009-06-02 17:05:27.000000000 +0200
+@@ -2,6 +2,12 @@
+  * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
+  * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+  *
++ * This version of the driver is specific to the FADS implementation,
++ * since the board contains control registers external to the processor
++ * for the control of the LevelOne LXT970 transceiver.  The MPC860T manual
++ * describes connections using the internal parallel port I/O, which
++ * is basically all of Port D.
++ *
+  * Right now, I am very wasteful with the buffers.  I allocate memory
+  * pages and then divide them into 2K frame buffers.  This way I know I
+  * have buffers large enough to hold one frame within one buffer descriptor.
+@@ -18,77 +24,123 @@
+  * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be)
+  * Copyright (c) 2004-2006 Macq Electronique SA.
+  */
++/*
++ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
++ */
+ 
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+-#include <linux/string.h>
+-#include <linux/ptrace.h>
++#include <linux/resource.h>
+ #include <linux/errno.h>
+ #include <linux/ioport.h>
+ #include <linux/slab.h>
+ #include <linux/interrupt.h>
+-#include <linux/pci.h>
+-#include <linux/init.h>
++#include <linux/wait.h>
+ #include <linux/delay.h>
++#include <linux/platform_device.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+ #include <linux/skbuff.h>
+ #include <linux/spinlock.h>
+-#include <linux/workqueue.h>
+-#include <linux/bitops.h>
+-#include <linux/io.h>
+-#include <linux/irq.h>
++#include <linux/dma-mapping.h>
+ #include <linux/clk.h>
+-#include <linux/platform_device.h>
++#include <linux/fec_enet.h>
++#include <linux/phy.h>
+ 
+-#include <asm/cacheflush.h>
++#include <asm/irq.h>
++#include <asm/io.h>
+ 
+-#ifndef CONFIG_ARCH_MXC
+-#include <asm/coldfire.h>
+-#include <asm/mcfsim.h>
++#define DRV_NAME		"fec"
++#define DEBUG
++
++#ifdef DEBUG
++static int debug = 0;
++#define dbg_lvl(n)	((n) < debug)
++module_param(debug, int, S_IRUGO | S_IWUSR);
++
++#define DBG(lvl, fmt...)	do { if (dbg_lvl(lvl)) printk(KERN_DEBUG fmt); } while (0)
++#else
++static int debug;
++#define dbg_lvl(n)	0
++module_param(debug, int, 0);
++
++#define DBG(lvl, fmt...)	do { } while (0)
+ #endif
+ 
++#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \
++    defined(CONFIG_M5272) || defined(CONFIG_M528x) || \
++    defined(CONFIG_M520x) || defined(CONFIG_M532x)
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
+ #include "fec.h"
+-
+-#ifdef CONFIG_ARCH_MXC
++#define FEC_ALIGNMENT  (0x03)          /*FEC needs 4bytes alignment*/
++#elif defined(CONFIG_ARCH_MXC)
+ #include <mach/hardware.h>
+-#define FEC_ALIGNMENT	0xf
++#include <mach/iim.h>
++#include "fec.h"
++#define FEC_ALIGNMENT  (0x0F)          /*FEC needs 128bits(16bytes) alignment*/
+ #else
+-#define FEC_ALIGNMENT	0x3
++#include <asm/8xx_immap.h>
++#include <asm/mpc8xx.h>
++#include "commproc.h"
++#define FEC_ALIGNMENT  (0x03)          /*FEC needs 4bytes alignment */
+ #endif
+ 
++#define FEC_ADDR_ALIGNMENT(x) ((unsigned char *)(((unsigned long)(x) + (FEC_ALIGNMENT)) & (~FEC_ALIGNMENT)))
++
++#if 0
+ /*
+  * Define the fixed address of the FEC hardware.
+  */
++/* USE resources provided by platform_device! */
++static unsigned int fec_hw[] = {
+ #if defined(CONFIG_M5272)
+-#define HAVE_mii_link_interrupt
+-
+-static unsigned char	fec_mac_default[] = {
+-	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++	(MCF_MBAR + 0x840),
++#elif defined(CONFIG_M527x)
++	(MCF_MBAR + 0x1000),
++	(MCF_MBAR + 0x1800),
++#elif defined(CONFIG_M523x) || defined(CONFIG_M528x)
++	(MCF_MBAR + 0x1000),
++#elif defined(CONFIG_M520x)
++	(MCF_MBAR+0x30000),
++#elif defined(CONFIG_M532x)
++	(MCF_MBAR+0xfc030000),
++#elif defined(CONFIG_ARCH_MXC)
++	(IO_ADDRESS(FEC_BASE_ADDR)),
++#else
++	&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec),
++#endif
+ };
++#endif
+ 
++#if 0
+ /*
+  * Some hardware gets it MAC address out of local flash memory.
+  * if this is non-zero then assume it is the address to get MAC from.
+  */
++/* implemented using platform_data! */
+ #if defined(CONFIG_NETtel)
+ #define	FEC_FLASHMAC	0xf0006006
+ #elif defined(CONFIG_GILBARCONAP) || defined(CONFIG_SCALES)
+ #define	FEC_FLASHMAC	0xf0006000
++#elif defined (CONFIG_MTD_KeyTechnology)
++#define	FEC_FLASHMAC	0xffe04000
+ #elif defined(CONFIG_CANCam)
+ #define	FEC_FLASHMAC	0xf0020000
+ #elif defined (CONFIG_M5272C3)
+ #define	FEC_FLASHMAC	(0xffe04000 + 4)
+ #elif defined(CONFIG_MOD5272)
+-#define FEC_FLASHMAC 	0xffc0406b
++#define FEC_FLASHMAC	0xffc0406b
+ #else
+ #define	FEC_FLASHMAC	0
+ #endif
+-#endif /* CONFIG_M5272 */
++#endif
++
++#define platform_func(p, args...)	((p) ? (p)(args) : 0)
+ 
+ /* Forward declarations of some structures to support different PHYs
+ */
+-
++#ifndef CONFIG_PHYLIB
+ typedef struct {
+ 	uint mii_data;
+ 	void (*funct)(uint mii_reg, struct net_device *dev);
+@@ -103,6 +155,7 @@ typedef struct {
+ 	const phy_cmd_t *ack_int;
+ 	const phy_cmd_t *shutdown;
+ } phy_info_t;
++#endif
+ 
+ /* The number of Tx and Rx buffers.  These are allocated from the page
+  * pool.  The code may assume these are power of two, so it it best
+@@ -116,12 +169,13 @@ typedef struct {
+ #define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
+ #define FEC_ENET_TX_FRSIZE	2048
+ #define FEC_ENET_TX_FRPPG	(PAGE_SIZE / FEC_ENET_TX_FRSIZE)
+-#define TX_RING_SIZE		16	/* Must be power of two */
+-#define TX_RING_MOD_MASK	15	/*   for this to work */
++#define TX_RING_SIZE		16			/* Must be power of two */
++#define TX_RING_MOD_MASK	(TX_RING_SIZE - 1)	/*   for this to work */
+ 
+ #if (((RX_RING_SIZE + TX_RING_SIZE) * 8) > PAGE_SIZE)
+ #error "FEC: descriptor ring size constants too large"
+ #endif
++#define CBD_BUF_SIZE		((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t))
+ 
+ /* Interrupt events/masks.
+ */
+@@ -136,6 +190,17 @@ typedef struct {
+ #define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */
+ #define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */
+ 
++/* MXC arch interrupt bits */
++#define FEC_ENET_LC	((uint)0x00200000)	/* Late collision */
++#define FEC_ENET_RL	((uint)0x00100000)	/* Collision retry limit exceeded */
++#define FEC_ENET_UN	((uint)0x00080000)	/* TX Fifo underrun */
++
++#ifndef CONFIG_ARCH_MXC
++#define FEC_ENET_MASK   ((uint)0xffc00000)
++#else
++#define FEC_ENET_MASK   ((uint)0xfff80000)
++#endif
++
+ /* The FEC stores dest/src/type, data, and checksum for receive packets.
+  */
+ #define PKT_MAXBUF_SIZE		1518
+@@ -150,7 +215,7 @@ typedef struct {
+  */
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+     defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
+-#define	OPT_FRAME_SIZE	(PKT_MAXBUF_SIZE << 16)
++#define	OPT_FRAME_SIZE	(RCR_MAX_FL_set(PKT_MAXBUF_SIZE))
+ #else
+ #define	OPT_FRAME_SIZE	0
+ #endif
+@@ -165,31 +230,45 @@ typedef struct {
+  */
+ struct fec_enet_private {
+ 	/* Hardware registers of the FEC device */
+-	volatile fec_t	*hwp;
+-
+-	struct net_device *netdev;
+-
+-	struct clk *clk;
++	void __iomem *reg_base;
++	void __iomem *mib_base;
++	struct resource *res_mem1;
++	struct resource *res_mem2;
++	int	etn_irq;
++	int	mii_irq;
++#ifndef CONFIG_PHYLIB
++	struct timer_list *phy_timer;
++#else
++	struct mii_bus *mii;
++	int mii_complete;
++#endif
++	u32 msg_enable;
+ 
+ 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
+-	unsigned char *tx_bounce[TX_RING_SIZE];
++	void	*tx_bounce[TX_RING_SIZE];
+ 	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
++	struct  sk_buff* rx_skbuff[RX_RING_SIZE];
+ 	ushort	skb_cur;
+ 	ushort	skb_dirty;
+ 
+ 	/* CPM dual port RAM relative addresses.
+ 	*/
+-	dma_addr_t	bd_dma;
++	struct device *dma_dev;		/* pointer to (platform_)device for dma_sync*() functions */
++	void	*cbd_mem_base;          /* save the virtual base address of rx&tx buffer descriptor */
++	dma_addr_t cbd_phys_base;	/* physical address of buffer descriptor memory for access by FEC HW */
++
+ 	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
+ 	cbd_t	*tx_bd_base;
+-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
+-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
++	cbd_t	*cur_rx, *cur_tx;	/* The next free ring entry */
++	cbd_t	*dirty_tx;		/* The ring entries to be free()ed. */
++	struct	net_device_stats stats;
+ 	uint	tx_full;
+-	/* hold while accessing the HW like ringbuffer for tx/rx but not MAC */
+-	spinlock_t hw_lock;
+-	/* hold while accessing the mii_list_t() elements */
+-	spinlock_t mii_lock;
++	spinlock_t lock;
+ 
++#ifdef CONFIG_PHYLIB
++	struct	phy_device *phy;
++	uint	phy_speed;
++#else
+ 	uint	phy_id;
+ 	uint	phy_id_done;
+ 	uint	phy_status;
+@@ -199,28 +278,41 @@ struct fec_enet_private {
+ 
+ 	uint	sequence_done;
+ 	uint	mii_phy_task_queued;
+-
++#endif
+ 	uint	phy_addr;
+ 
+-	int	index;
+-	int	opened;
+-	int	link;
+-	int	old_link;
+-	int	full_duplex;
++	unsigned int opened:1;
++	unsigned int phy_int_enabled:1;
++	unsigned int linkstatus:1;
++#ifndef CONFIG_PHYLIB
++	unsigned int old_linkstatus:1;
++#endif
++	unsigned int full_duplex:1;
++
++	struct clk *clk;
+ };
+ 
+-static int fec_enet_open(struct net_device *dev);
+-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
+-static void fec_enet_mii(struct net_device *dev);
+-static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
++#ifdef CONFIG_PHYLIB
++static int fec_connect_phy(struct net_device *dev, struct fec_enet_private *fep);
++#else
++static irqreturn_t mii_link_interrupt(int irq, void *dev_id);
++#endif
++static void fec_restart(struct net_device *dev, int duplex);
+ static void fec_enet_tx(struct net_device *dev);
+ static void fec_enet_rx(struct net_device *dev);
+-static int fec_enet_close(struct net_device *dev);
+-static void set_multicast_list(struct net_device *dev);
+-static void fec_restart(struct net_device *dev, int duplex);
++static void fec_enet_mii(struct net_device *dev);
+ static void fec_stop(struct net_device *dev);
+-static void fec_set_mac_address(struct net_device *dev);
++static void _fec_set_mac_address(struct net_device *dev);
+ 
++/*
++ *  fec_copy_threshold controls the copy when receiving ethernet frame.
++ *     If ethernet header is aligned on a 4byte boundary, the ip header and
++ *     higher level header will not be aligned.
++ *     The reason is, that an ethernet header is 14bytes long.
++ *     And the max size of tcp & ip header is 128bytes. Normally it is 40bytes.
++ *     So I set the default value between 128 to 256.
++ */
++static int fec_copy_threshold = 192;
+ 
+ /* MII processing.  We keep this as simple as possible.  Requests are
+  * placed on the list (if there is room).  When the request is finished
+@@ -232,14 +324,16 @@ typedef struct mii_list {
+ 	struct	mii_list *mii_next;
+ } mii_list_t;
+ 
++#ifndef CONFIG_PHYLIB
+ #define		NMII	20
+ static mii_list_t	mii_cmds[NMII];
+ static mii_list_t	*mii_free;
+ static mii_list_t	*mii_head;
+ static mii_list_t	*mii_tail;
+ 
+-static int	mii_queue(struct net_device *dev, int request,
+-				void (*func)(uint, struct net_device *));
++static int mii_queue(struct net_device *dev, int request,
++		     void (*func)(uint, struct net_device *));
++#endif
+ 
+ /* Make MII read/write commands for the FEC.
+ */
+@@ -284,87 +378,233 @@ static int	mii_queue(struct net_device *
+ #define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
+ #define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
+ 
++#ifndef DEBUG
++static inline unsigned long fec_reg_read(struct fec_enet_private *fep, unsigned int reg)
++{
++	return readl(fep->reg_base + reg);
++}
++
++static inline void fec_reg_write(struct fec_enet_private *fep, unsigned int reg, unsigned long val)
++{
++	writel(val, fep->reg_base + reg);
++}
++#else
++#define fec_reg_read(fep, reg)		__fec_reg_read(fep, reg, __FUNCTION__, #reg)
++#define fec_reg_write(fep, reg, val)	__fec_reg_write(fep, reg, val, __FUNCTION__, #reg)
++
++static inline unsigned long __fec_reg_read(struct fec_enet_private *fep, unsigned int reg,
++					   const char *func, const char *reg_name)
++{
++	unsigned long val = readl(fep->reg_base + reg);
++	DBG(3, "%s: Read %08lx from %s(%03x)\n", func, val, reg_name, reg);
++	return val;
++}
++
++static inline void __fec_reg_write(struct fec_enet_private *fep, unsigned int reg,
++				   unsigned long val, const char *func, const char *reg_name)
++{
++	DBG(3, "%s: Writing %08lx to %s(%03x)\n", func, val, reg_name, reg);
++	writel(val, fep->reg_base + reg);
++}
++#endif
++
++static inline void fec_enet_cbd_get(struct fec_enet_private *fep)
++{
++	DBG(2, "%s: Requesting cbd area: %08lx\n", __FUNCTION__,
++	    (unsigned long)fep->cbd_phys_base);
++	dma_sync_single_for_cpu(fep->dma_dev, fep->cbd_phys_base,
++				CBD_BUF_SIZE, DMA_BIDIRECTIONAL);
++}
++
++static inline void fec_enet_cbd_put(struct fec_enet_private *fep)
++{
++	DBG(2, "%s: Flushing changes to cbd area\n", __FUNCTION__);
++	dma_sync_single_for_device(fep->dma_dev, fep->cbd_phys_base,
++				   CBD_BUF_SIZE, DMA_BIDIRECTIONAL);
++}
++
++static inline void fec_enet_rxbuf_get(struct fec_enet_private *fep, cbd_t *bdp, ushort len)
++{
++	DBG(2, "%s: Requesting RX buffer %08lx(%u)\n", __FUNCTION__,
++	    (unsigned long)bdp->cbd_bufaddr, len);
++	dma_sync_single_for_cpu(fep->dma_dev, bdp->cbd_bufaddr,
++				len, DMA_FROM_DEVICE);
++}
++
++static inline void fec_enet_rxbuf_put(struct fec_enet_private *fep, cbd_t *bdp, ushort len)
++{
++	DBG(2, "%s: Releasing RX buffer %08lx(%u)\n", __FUNCTION__, (ulong)bdp->cbd_bufaddr, len);
++	dma_sync_single_for_device(fep->dma_dev, bdp->cbd_bufaddr, len, DMA_FROM_DEVICE);
++}
++
++static inline void fec_enet_rxbuf_map(struct fec_enet_private *fep, cbd_t *bdp,
++				      void *buf, ushort len)
++{
++	BUG_ON(!dma_mapping_error(fep->dma_dev, bdp->cbd_bufaddr));
++	bdp->cbd_bufaddr = dma_map_single(fep->dma_dev, buf,
++					  len, DMA_FROM_DEVICE);
++	DBG(2, "%s: RX buffer %p(%u) mapped to %08lx\n", __FUNCTION__,
++	    buf, len, (unsigned long)bdp->cbd_bufaddr);
++}
++
++static inline void fec_enet_rxbuf_unmap(struct fec_enet_private *fep, cbd_t *bdp, ushort len)
++{
++	DBG(2, "%s: Unmapping RX buffer %08lx(%u)\n", __FUNCTION__,
++	    (unsigned long)bdp->cbd_bufaddr, len);
++	BUG_ON(dma_mapping_error(fep->dma_dev, bdp->cbd_bufaddr));
++	dma_unmap_single(fep->dma_dev, bdp->cbd_bufaddr,
++			 len, DMA_FROM_DEVICE);
++	bdp->cbd_bufaddr = ~0;
++}
++
++static inline void fec_enet_txbuf_map(struct fec_enet_private *fep, cbd_t *bdp,
++				      void *buf, ushort len)
++{
++	BUG_ON(!dma_mapping_error(fep->dma_dev, bdp->cbd_bufaddr));
++	bdp->cbd_bufaddr = dma_map_single(fep->dma_dev, buf,
++					  len, DMA_TO_DEVICE);
++	DBG(2, "%s: TX buffer %p(%u) mapped to %08lx\n", __FUNCTION__,
++	    buf, len, (unsigned long)bdp->cbd_bufaddr);
++}
++
++static inline void fec_enet_txbuf_unmap(struct fec_enet_private *fep, cbd_t *bdp, ushort len)
++{
++	DBG(2, "%s: Unmapping TX buffer %08lx(%u)\n", __FUNCTION__,
++	    (unsigned long)bdp->cbd_bufaddr, len);
++	BUG_ON(dma_mapping_error(fep->dma_dev, bdp->cbd_bufaddr));
++	dma_unmap_single(fep->dma_dev, bdp->cbd_bufaddr,
++			 len, DMA_TO_DEVICE);
++	bdp->cbd_bufaddr = ~0;
++}
++
++static inline void fec_enet_txbuf_get(struct fec_enet_private *fep, cbd_t *bdp, ushort len)
++{
++	DBG(2, "%s: Requesting TX buffer %08lx(%u)\n", __FUNCTION__,
++	    (unsigned long)bdp->cbd_bufaddr, len);
++	dma_sync_single_for_cpu(fep->dma_dev, bdp->cbd_bufaddr,
++				len, DMA_TO_DEVICE);
++}
++
++static inline void fec_enet_txbuf_put(struct fec_enet_private *fep, cbd_t *bdp, ushort len)
++{
++	DBG(2, "%s: Releasing TX buffer %08lx(%u)\n", __FUNCTION__,
++	    (unsigned long)bdp->cbd_bufaddr, len);
++	dma_sync_single_for_device(fep->dma_dev, bdp->cbd_bufaddr,
++				   len, DMA_TO_DEVICE);
++}
++
++static void dump_packet(const char *prefix, const unsigned char *data, int len)
++{
++	if (dbg_lvl(3)) {
++		print_hex_dump_bytes(prefix, DUMP_PREFIX_OFFSET, data, len);
++	}
++}
++
++static void dump_tx_buffers(struct fec_enet_private *fep)
++{
++	cbd_t *bdp = fep->tx_bd_base;
++	int i;
++
++	printk(KERN_DEBUG "tx buffers: %u buffers\n", TX_RING_SIZE);
++	for (i = 0; i < TX_RING_SIZE; i++, bdp++) {
++		printk(KERN_DEBUG "  %p: %04x %04x %08x\n",
++		       bdp,
++		       bdp->cbd_sc,
++		       bdp->cbd_datlen,
++		       bdp->cbd_bufaddr);
++		print_hex_dump_bytes("tx buffers:", DUMP_PREFIX_ADDRESS, bdp, sizeof(cbd_t));
++	}
++}
++
++static void dump_rx_buffers(struct fec_enet_private *fep)
++{
++	cbd_t *bdp = fep->rx_bd_base;
++	int i;
++
++	printk(KERN_DEBUG "rx buffers: %lu buffers\n", RX_RING_SIZE);
++	for (i = 0; i < RX_RING_SIZE; i++, bdp++) {
++		printk(KERN_DEBUG "  %p: %04x %04x %08x\n",
++		       bdp,
++		       bdp->cbd_sc,
++		       bdp->cbd_datlen,
++		       bdp->cbd_bufaddr);
++		print_hex_dump_bytes("rx buffers:", DUMP_PREFIX_ADDRESS, bdp, sizeof(cbd_t));
++	}
++}
+ 
+ static int
+ fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
+ {
+-	struct fec_enet_private *fep;
+-	volatile fec_t	*fecp;
+-	volatile cbd_t	*bdp;
+-	unsigned short	status;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	cbd_t *bdp;
++	unsigned short status;
+ 	unsigned long flags;
+ 
+-	fep = netdev_priv(dev);
+-	fecp = (volatile fec_t*)dev->base_addr;
+-
+-	if (!fep->link) {
++	if (!fep->linkstatus) {
++		DBG(0, "%s: Cannot send packet; link is down\n", __FUNCTION__);
+ 		/* Link is down or autonegotiation is in progress. */
+ 		return 1;
+ 	}
+ 
+-	spin_lock_irqsave(&fep->hw_lock, flags);
++	spin_lock_irqsave(&fep->lock, flags);
++
++	//WARN_ON(fec_reg_read(fep, FEC_TDAR) & TDAR_BUSY);
++	fec_enet_cbd_get(fep);
++
+ 	/* Fill in a Tx ring entry */
+ 	bdp = fep->cur_tx;
+ 
+ 	status = bdp->cbd_sc;
+-#ifndef final_version
++#ifdef DEBUG
+ 	if (status & BD_ENET_TX_READY) {
+ 		/* Ooops.  All transmit buffers are full.  Bail out.
+ 		 * This should not happen, since dev->tbusy should be set.
+ 		 */
+ 		printk("%s: tx queue full!.\n", dev->name);
+-		spin_unlock_irqrestore(&fep->hw_lock, flags);
++		fec_enet_cbd_put(fep);
++		spin_unlock_irqrestore(&fep->lock, flags);
+ 		return 1;
+ 	}
+ #endif
+-
+ 	/* Clear all of the status flags.
+ 	 */
+ 	status &= ~BD_ENET_TX_STATS;
+ 
+ 	/* Set buffer length and buffer pointer.
+ 	*/
+-	bdp->cbd_bufaddr = __pa(skb->data);
+ 	bdp->cbd_datlen = skb->len;
+ 
++	dump_packet("sending packet:", skb->data, skb->len);
+ 	/*
+ 	 *	On some FEC implementations data must be aligned on
+ 	 *	4-byte boundaries. Use bounce buffers to copy data
+ 	 *	and get it aligned. Ugh.
+ 	 */
+-	if (bdp->cbd_bufaddr & FEC_ALIGNMENT) {
++	if (unlikely((bdp->cbd_bufaddr) & FEC_ALIGNMENT)) {
+ 		unsigned int index;
+ 		index = bdp - fep->tx_bd_base;
+-		memcpy(fep->tx_bounce[index], (void *)skb->data, skb->len);
+-		bdp->cbd_bufaddr = __pa(fep->tx_bounce[index]);
++		memcpy(fep->tx_bounce[index], skb->data, skb->len);
++		fec_enet_txbuf_map(fep, bdp, fep->tx_bounce[index], skb->len);
++	} else {
++		fec_enet_txbuf_map(fep, bdp, skb->data, skb->len);
+ 	}
+ 
+ 	/* Save skb pointer.
+ 	*/
+ 	fep->tx_skbuff[fep->skb_cur] = skb;
+ 
+-	dev->stats.tx_bytes += skb->len;
+-	fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
+-
+-	/* Push the data cache so the CPM does not get stale memory
+-	 * data.
+-	 */
+-	dma_sync_single(NULL, bdp->cbd_bufaddr,
+-			bdp->cbd_datlen, DMA_TO_DEVICE);
++	fep->stats.tx_bytes += skb->len;
++	fep->skb_cur = (fep->skb_cur + 1) & TX_RING_MOD_MASK;
+ 
+ 	/* Send it on its way.  Tell FEC it's ready, interrupt when done,
+ 	 * it's the last BD of the frame, and to put the CRC on the end.
+ 	 */
+-
+ 	status |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
+ 			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
+ 	bdp->cbd_sc = status;
+ 
+ 	dev->trans_start = jiffies;
+ 
+-	/* Trigger transmission start */
+-	fecp->fec_x_des_active = 0;
+-
+ 	/* If this was the last BD in the ring, start at the beginning again.
+ 	*/
+ 	if (status & BD_ENET_TX_WRAP) {
+@@ -375,12 +615,22 @@ fec_enet_start_xmit(struct sk_buff *skb,
+ 
+ 	if (bdp == fep->dirty_tx) {
+ 		fep->tx_full = 1;
++		DBG(0, "TX ring full, stopping netif queue\n");
+ 		netif_stop_queue(dev);
+ 	}
+ 
+-	fep->cur_tx = (cbd_t *)bdp;
++	fep->cur_tx = bdp;
++	fec_enet_cbd_put(fep);
++#if 0
++	if (dbg_lvl(3)) {
++		dump_tx_buffers(fep);
++		dump_rx_buffers(fep);
++	}
++#endif
++	/* Trigger transmission start */
++	fec_reg_write(fep, FEC_TDAR, DONT_CARE);
+ 
+-	spin_unlock_irqrestore(&fep->hw_lock, flags);
++	spin_unlock_irqrestore(&fep->lock, flags);
+ 
+ 	return 0;
+ }
+@@ -390,101 +640,126 @@ fec_timeout(struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+ 
+-	printk("%s: transmit timed out.\n", dev->name);
+-	dev->stats.tx_errors++;
+-#ifndef final_version
++	printk(KERN_WARNING "%s: transmit timed out.\n", dev->name);
++	fep->stats.tx_errors++;
++#ifdef DEBUG
+ 	{
+-	int	i;
+-	cbd_t	*bdp;
++		int i;
++		cbd_t *bdp;
+ 
+-	printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
+-	       (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
+-	       (unsigned long)fep->dirty_tx,
+-	       (unsigned long)fep->cur_rx);
++		fec_enet_cbd_get(fep);
+ 
+-	bdp = fep->tx_bd_base;
+-	printk(" tx: %u buffers\n",  TX_RING_SIZE);
+-	for (i = 0 ; i < TX_RING_SIZE; i++) {
+-		printk("  %08x: %04x %04x %08x\n",
+-		       (uint) bdp,
+-		       bdp->cbd_sc,
+-		       bdp->cbd_datlen,
+-		       (int) bdp->cbd_bufaddr);
+-		bdp++;
+-	}
++		printk(KERN_DEBUG "%s: Ring data dump: cur_tx %p%s, dirty_tx %p cur_rx: %p\n",
++		       __FUNCTION__,
++		       fep->cur_tx, fep->tx_full ? " (full)" : "",
++		       fep->dirty_tx,
++		       fep->cur_rx);
+ 
+-	bdp = fep->rx_bd_base;
+-	printk(" rx: %lu buffers\n",  (unsigned long) RX_RING_SIZE);
+-	for (i = 0 ; i < RX_RING_SIZE; i++) {
+-		printk("  %08x: %04x %04x %08x\n",
+-		       (uint) bdp,
+-		       bdp->cbd_sc,
+-		       bdp->cbd_datlen,
+-		       (int) bdp->cbd_bufaddr);
+-		bdp++;
+-	}
++		bdp = fep->tx_bd_base;
++		printk(" tx: %u buffers\n", TX_RING_SIZE);
++		for (i = 0; i < TX_RING_SIZE; i++) {
++			printk("  %p: %04x %04x %08x\n",
++			       bdp,
++			       bdp->cbd_sc,
++			       bdp->cbd_datlen,
++			       bdp->cbd_bufaddr);
++			bdp++;
++		}
++
++		bdp = fep->rx_bd_base;
++		printk(" rx: %lu buffers\n", RX_RING_SIZE);
++		for (i = 0; i < RX_RING_SIZE; i++) {
++			printk("  %p: %04x %04x %08x\n",
++			       bdp,
++			       bdp->cbd_sc,
++			       bdp->cbd_datlen,
++			       bdp->cbd_bufaddr);
++			bdp++;
++		}
++		fec_enet_cbd_put(fep);
+ 	}
+ #endif
+ 	fec_restart(dev, fep->full_duplex);
+-	netif_wake_queue(dev);
++	DBG(0, "%s: Scheduling netif queue\n", __FUNCTION__);
++	//netif_schedule(dev);
+ }
+ 
+ /* The interrupt handler.
+  * This is called from the MPC core interrupt.
+  */
+ static irqreturn_t
+-fec_enet_interrupt(int irq, void * dev_id)
++fec_enet_interrupt(int irq, void *dev_id)
+ {
+-	struct	net_device *dev = dev_id;
+-	volatile fec_t	*fecp;
+-	uint	int_events;
+-	irqreturn_t ret = IRQ_NONE;
+-
+-	fecp = (volatile fec_t*)dev->base_addr;
++	struct net_device *dev = dev_id;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	uint int_events;
++	int handled = 0;
++	unsigned int eimr = fec_reg_read(fep, FEC_EIMR);
+ 
++	DBG(2, "%s: %08lx:%08lx\n", __FUNCTION__,
++	    fec_reg_read(fep, FEC_EIR), fec_reg_read(fep, FEC_EIMR));
+ 	/* Get the interrupt events that caused us to be here.
+ 	*/
+-	do {
+-		int_events = fecp->fec_ievent;
+-		fecp->fec_ievent = int_events;
++	while ((int_events = fec_reg_read(fep, FEC_EIR) & FEC_ENET_MASK) != 0) {
++		if (int_events & ~eimr) {
++			printk(KERN_WARNING "%s: masked interrupt condition: %08x\n",
++			       __FUNCTION__, int_events & ~eimr);
++		}
++
++		fec_reg_write(fep, FEC_EIR, int_events);
+ 
+ 		/* Handle receive event in its own function.
+ 		 */
+-		if (int_events & FEC_ENET_RXF) {
+-			ret = IRQ_HANDLED;
++		if (int_events & (FEC_ENET_RXF | FEC_ENET_RXB)) {
++			DBG(2, "%s: Handling RX Interrupt\n", __FUNCTION__);
++			handled = 1;
+ 			fec_enet_rx(dev);
+ 		}
+ 
++		if (int_events & FEC_ENET_UN) {
++			printk(KERN_WARNING "TX fifo underrun");
++		}
+ 		/* Transmit OK, or non-fatal error. Update the buffer
+ 		   descriptors. FEC handles all errors, we just discover
+ 		   them as part of the transmit process.
+ 		*/
+-		if (int_events & FEC_ENET_TXF) {
+-			ret = IRQ_HANDLED;
++		if (int_events & (FEC_ENET_TXF | FEC_ENET_TXB)) {
++			DBG(2, "%s: Handling TX Interrupt\n", __FUNCTION__);
++			handled = 1;
+ 			fec_enet_tx(dev);
+ 		}
+ 
+-		if (int_events & FEC_ENET_MII) {
+-			ret = IRQ_HANDLED;
++		if (int_events & (FEC_ENET_MII | FEC_ENET_HBERR)) {
++			DBG(2, "%s: Handling MII Interrupt\n", __FUNCTION__);
++			handled = 1;
+ 			fec_enet_mii(dev);
+ 		}
+-
+-	} while (int_events);
+-
+-	return ret;
++	}
++	return IRQ_RETVAL(handled);
+ }
+ 
++static void fec_free_skb(struct fec_enet_private *fep, cbd_t *bdp, struct sk_buff **pskb)
++{
++	struct sk_buff *skb = *pskb;
++	if (!dma_mapping_error(fep->dma_dev, bdp->cbd_bufaddr)) {
++		fec_enet_txbuf_unmap(fep, bdp, skb->len);
++	}
++	dev_kfree_skb_any(skb);
++	*pskb = NULL;
++}
+ 
+ static void
+ fec_enet_tx(struct net_device *dev)
+ {
+-	struct	fec_enet_private *fep;
+-	volatile cbd_t	*bdp;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	cbd_t *bdp;
+ 	unsigned short status;
+-	struct	sk_buff	*skb;
++	struct sk_buff *skb;
+ 
+-	fep = netdev_priv(dev);
+-	spin_lock_irq(&fep->hw_lock);
++	spin_lock(&fep->lock);
++
++	//WARN_ON(fec_reg_read(fep, FEC_TDAR) & TDAR_BUSY);
++	fec_enet_cbd_get(fep);
+ 	bdp = fep->dirty_tx;
+ 
+ 	while (((status = bdp->cbd_sc) & BD_ENET_TX_READY) == 0) {
+@@ -495,22 +770,22 @@ fec_enet_tx(struct net_device *dev)
+ 		if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
+ 				   BD_ENET_TX_RL | BD_ENET_TX_UN |
+ 				   BD_ENET_TX_CSL)) {
+-			dev->stats.tx_errors++;
++			fep->stats.tx_errors++;
+ 			if (status & BD_ENET_TX_HB)  /* No heartbeat */
+-				dev->stats.tx_heartbeat_errors++;
++				fep->stats.tx_heartbeat_errors++;
+ 			if (status & BD_ENET_TX_LC)  /* Late collision */
+-				dev->stats.tx_window_errors++;
++				fep->stats.tx_window_errors++;
+ 			if (status & BD_ENET_TX_RL)  /* Retrans limit */
+-				dev->stats.tx_aborted_errors++;
++				fep->stats.tx_aborted_errors++;
+ 			if (status & BD_ENET_TX_UN)  /* Underrun */
+-				dev->stats.tx_fifo_errors++;
++				fep->stats.tx_fifo_errors++;
+ 			if (status & BD_ENET_TX_CSL) /* Carrier lost */
+-				dev->stats.tx_carrier_errors++;
++				fep->stats.tx_carrier_errors++;
+ 		} else {
+-			dev->stats.tx_packets++;
++			fep->stats.tx_packets++;
+ 		}
+ 
+-#ifndef final_version
++#ifdef DEBUG
+ 		if (status & BD_ENET_TX_READY)
+ 			printk("HEY! Enet xmit interrupt and TX_READY.\n");
+ #endif
+@@ -518,12 +793,13 @@ fec_enet_tx(struct net_device *dev)
+ 		 * but we eventually sent the packet OK.
+ 		 */
+ 		if (status & BD_ENET_TX_DEF)
+-			dev->stats.collisions++;
++			fep->stats.collisions++;
+ 
++		dump_packet("sent packet:", fep->tx_skbuff[fep->skb_dirty]->data,
++			    fep->tx_skbuff[fep->skb_dirty]->len);
+ 		/* Free the sk buffer associated with this last transmit.
+ 		 */
+-		dev_kfree_skb_any(skb);
+-		fep->tx_skbuff[fep->skb_dirty] = NULL;
++		fec_free_skb(fep, bdp, &fep->tx_skbuff[fep->skb_dirty]);
+ 		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
+ 
+ 		/* Update pointer to next buffer descriptor to be transmitted.
+@@ -538,12 +814,15 @@ fec_enet_tx(struct net_device *dev)
+ 		 */
+ 		if (fep->tx_full) {
+ 			fep->tx_full = 0;
+-			if (netif_queue_stopped(dev))
++			if (netif_queue_stopped(dev)) {
++				DBG(0, "%s: Waking up netif queue\n", __FUNCTION__);
+ 				netif_wake_queue(dev);
++			}
+ 		}
+ 	}
+-	fep->dirty_tx = (cbd_t *)bdp;
+-	spin_unlock_irq(&fep->hw_lock);
++	fec_enet_cbd_put(fep);
++	fep->dirty_tx = bdp;
++	spin_unlock(&fep->lock);
+ }
+ 
+ 
+@@ -555,22 +834,22 @@ fec_enet_tx(struct net_device *dev)
+ static void
+ fec_enet_rx(struct net_device *dev)
+ {
+-	struct	fec_enet_private *fep;
+-	volatile fec_t	*fecp;
+-	volatile cbd_t *bdp;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	cbd_t *bdp;
+ 	unsigned short status;
+-	struct	sk_buff	*skb;
+-	ushort	pkt_len;
+-	__u8 *data;
++	struct sk_buff *skb;
++	ushort pkt_len;
++	int rx_index;
+ 
+ #ifdef CONFIG_M532x
++	/* This is probably nonsense
++	   Proper use of dma-mapping functions should make this obsolete
++	*/
+ 	flush_cache_all();
+ #endif
+-
+-	fep = netdev_priv(dev);
+-	fecp = (volatile fec_t*)dev->base_addr;
+-
+-	spin_lock_irq(&fep->hw_lock);
++	/* reserve the dual port memory area for our use */
++	//WARN_ON(fec_reg_read(fep, FEC_RDAR) & RDAR_BUSY);
++	fec_enet_cbd_get(fep);
+ 
+ 	/* First, grab all of the stats for the incoming packet.
+ 	 * These get messed up if we get called due to a busy condition.
+@@ -578,32 +857,34 @@ fec_enet_rx(struct net_device *dev)
+ 	bdp = fep->cur_rx;
+ 
+ while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) {
+-
+-#ifndef final_version
++	rx_index = bdp - fep->rx_bd_base;
++#ifdef DEBUG
+ 	/* Since we have allocated space to hold a complete frame,
+ 	 * the last indicator should be set.
+ 	 */
+-	if ((status & BD_ENET_RX_LAST) == 0)
+-		printk("FEC ENET: rcv is not +last\n");
++	WARN_ON(!(status & BD_ENET_RX_LAST));
+ #endif
+ 
+-	if (!fep->opened)
++	if (WARN_ON(!fep->opened)) {
++		DBG(0, "%s: Driver not opened; ignoring packet\n", __FUNCTION__);
++#if 0
+ 		goto rx_processing_done;
+-
++#endif
++	}
+ 	/* Check for errors. */
+ 	if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
+ 			   BD_ENET_RX_CR | BD_ENET_RX_OV)) {
+-		dev->stats.rx_errors++;
++		fep->stats.rx_errors++;
+ 		if (status & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
+ 		/* Frame too long or too short. */
+-			dev->stats.rx_length_errors++;
++			fep->stats.rx_length_errors++;
+ 		}
+ 		if (status & BD_ENET_RX_NO)	/* Frame alignment */
+-			dev->stats.rx_frame_errors++;
++			fep->stats.rx_frame_errors++;
+ 		if (status & BD_ENET_RX_CR)	/* CRC Error */
+-			dev->stats.rx_crc_errors++;
++			fep->stats.rx_crc_errors++;
+ 		if (status & BD_ENET_RX_OV)	/* FIFO overrun */
+-			dev->stats.rx_fifo_errors++;
++			fep->stats.rx_fifo_errors++;
+ 	}
+ 
+ 	/* Report late collisions as a frame error.
+@@ -611,39 +892,91 @@ while (!((status = bdp->cbd_sc) & BD_ENE
+ 	 * have in the buffer.  So, just drop this frame on the floor.
+ 	 */
+ 	if (status & BD_ENET_RX_CL) {
+-		dev->stats.rx_errors++;
+-		dev->stats.rx_frame_errors++;
++		fep->stats.rx_errors++;
++		fep->stats.rx_frame_errors++;
++		DBG(0, "%s: Collision detected; dropping packet\n", __FUNCTION__);
++		if (bdp->cbd_datlen > PKT_MAXBUF_SIZE) {
++			printk(KERN_ERR "invalid packet size %u; max %u\n", bdp->cbd_datlen,
++			       PKT_MAXBUF_SIZE);
++		} else {
++			fec_enet_rxbuf_get(fep, bdp, bdp->cbd_datlen);
++			dump_packet("received packet:",
++				    fep->rx_skbuff[rx_index]->data, bdp->cbd_datlen);
++			fec_enet_rxbuf_put(fep, bdp, bdp->cbd_datlen);
++		}
+ 		goto rx_processing_done;
+ 	}
+-
++#if 1
++	if (!fep->opened) {
++		DBG(0, "%s: Driver not opened; ignoring packet\n", __FUNCTION__);
++		if (bdp->cbd_datlen > PKT_MAXBUF_SIZE) {
++			printk(KERN_ERR "invalid packet size %u; max %u\n", bdp->cbd_datlen,
++			       PKT_MAXBUF_SIZE);
++		} else {
++			fec_enet_rxbuf_get(fep, bdp, bdp->cbd_datlen);
++			dump_packet("received packet:",
++				    fep->rx_skbuff[rx_index]->data, bdp->cbd_datlen);
++			fec_enet_rxbuf_put(fep, bdp, bdp->cbd_datlen);
++		}
++		goto rx_processing_done;
++	}
++#endif
+ 	/* Process the incoming frame.
+ 	 */
+-	dev->stats.rx_packets++;
++	fep->stats.rx_packets++;
+ 	pkt_len = bdp->cbd_datlen;
+-	dev->stats.rx_bytes += pkt_len;
+-	data = (__u8*)__va(bdp->cbd_bufaddr);
+-
+-	dma_sync_single(NULL, (unsigned long)__pa(data),
+-			pkt_len - 4, DMA_FROM_DEVICE);
++	fep->stats.rx_bytes += pkt_len;
+ 
+ 	/* This does 16 byte alignment, exactly what we need.
+ 	 * The packet length includes FCS, but we don't want to
+ 	 * include that when passing upstream as it messes up
+ 	 * bridging applications.
+ 	 */
+-	skb = dev_alloc_skb(pkt_len-4);
++	if ((pkt_len - 4) < fec_copy_threshold) {
++		skb = dev_alloc_skb(pkt_len);
++	} else {
++		skb = dev_alloc_skb(FEC_ENET_RX_FRSIZE);
++	}
+ 
+ 	if (skb == NULL) {
+ 		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+-		dev->stats.rx_dropped++;
++		fep->stats.rx_dropped++;
+ 	} else {
+-		skb_put(skb,pkt_len-4);	/* Make room */
+-		skb_copy_to_linear_data(skb, data, pkt_len-4);
+-		skb->protocol=eth_type_trans(skb,dev);
++		if ((pkt_len - 4) < fec_copy_threshold) {
++			/* skip 2 bytes, so IP header is on a 4 bytes boundary */
++			skb_reserve(skb, 2);
++			skb_put(skb, pkt_len - 4); /* Make room */
++			fec_enet_rxbuf_get(fep, bdp, pkt_len - 4);
++			skb_copy_to_linear_data(skb,
++						fep->rx_skbuff[rx_index]->data,
++						pkt_len - 4);
++			fec_enet_rxbuf_put(fep, bdp, pkt_len - 4);
++		} else {
++			struct sk_buff *pskb = fep->rx_skbuff[rx_index];
++
++			/* unmap the skb we are going to hand down to the network layer */
++			fec_enet_rxbuf_unmap(fep, bdp, FEC_ENET_RX_FRSIZE);
++
++			/* init the newly allocated skb */
++			fep->rx_skbuff[rx_index] = skb;
++			skb->data = FEC_ADDR_ALIGNMENT(skb->data);
++			/* map the newly allocated skb's data buffer for DMA */
++			fec_enet_rxbuf_map(fep, bdp, skb->data, FEC_ENET_RX_FRSIZE);
++
++			skb_put(pskb, pkt_len - 4);        /* Make room */
++			skb = pskb;
++		}
++		skb->dev = dev;
++		skb->protocol = eth_type_trans(skb, dev);
+ 		netif_rx(skb);
+ 	}
+   rx_processing_done:
+-
++#if 0
++	if (dbg_lvl(3)) {
++		dump_rx_buffers(fep);
++		dump_tx_buffers(fep);
++	}
++#endif
+ 	/* Clear the status flags for this buffer.
+ 	*/
+ 	status &= ~BD_ENET_RX_STATS;
+@@ -653,6 +986,9 @@ while (!((status = bdp->cbd_sc) & BD_ENE
+ 	status |= BD_ENET_RX_EMPTY;
+ 	bdp->cbd_sc = status;
+ 
++	/* release the dual port memory area for use by the FEC hardware */
++	fec_enet_cbd_put(fep);
++
+ 	/* Update BD pointer to next entry.
+ 	*/
+ 	if (status & BD_ENET_RX_WRAP)
+@@ -665,10 +1001,10 @@ while (!((status = bdp->cbd_sc) & BD_ENE
+ 	 * incoming frames.  On a heavily loaded network, we should be
+ 	 * able to keep up at the expense of system resources.
+ 	 */
+-	fecp->fec_r_des_active = 0;
++	fec_reg_write(fep, FEC_RDAR, DONT_CARE);
+ #endif
+    } /* while (!((status = bdp->cbd_sc) & BD_ENET_RX_EMPTY)) */
+-	fep->cur_rx = (cbd_t *)bdp;
++	fep->cur_rx = bdp;
+ 
+ #if 0
+ 	/* Doing this here will allow us to process all frames in the
+@@ -678,27 +1014,28 @@ while (!((status = bdp->cbd_sc) & BD_ENE
+ 	 * our way back to the interrupt return only to come right back
+ 	 * here.
+ 	 */
+-	fecp->fec_r_des_active = 0;
++	fec_reg_write(fep, FEC_RDAR, DONT_CARE);
+ #endif
+-
+-	spin_unlock_irq(&fep->hw_lock);
+ }
+ 
+-
++#ifdef CONFIG_PHYLIB
+ /* called from interrupt context */
++static void fec_enet_mii(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++	fep->mii_complete = 1;
++}
++#else
+ static void
+ fec_enet_mii(struct net_device *dev)
+ {
+-	struct	fec_enet_private *fep;
+-	volatile fec_t	*ep;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 	mii_list_t	*mip;
+ 	uint		mii_reg;
+ 
+-	fep = netdev_priv(dev);
+-	spin_lock_irq(&fep->mii_lock);
++	mii_reg = fec_reg_read(fep, FEC_MMFR);
+ 
+-	ep = fep->hwp;
+-	mii_reg = ep->fec_mii_data;
++	spin_lock(&fep->lock);
+ 
+ 	if ((mip = mii_head) == NULL) {
+ 		printk("MII and no head!\n");
+@@ -713,27 +1050,27 @@ fec_enet_mii(struct net_device *dev)
+ 	mii_free = mip;
+ 
+ 	if ((mip = mii_head) != NULL)
+-		ep->fec_mii_data = mip->mii_regval;
++		fec_reg_write(fep, FEC_MMFR, mip->mii_regval);
+ 
+ unlock:
+-	spin_unlock_irq(&fep->mii_lock);
++	spin_unlock(&fep->lock);
+ }
+ 
+ static int
+ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
+ {
+-	struct fec_enet_private *fep;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 	unsigned long	flags;
+ 	mii_list_t	*mip;
+ 	int		retval;
+ 
++	retval = 0;
++
++	spin_lock_irqsave(&fep->lock,flags);
++
+ 	/* Add PHY address to register command.
+ 	*/
+-	fep = netdev_priv(dev);
+-	spin_lock_irqsave(&fep->mii_lock, flags);
+-
+ 	regval |= fep->phy_addr << 23;
+-	retval = 0;
+ 
+ 	if ((mip = mii_free) != NULL) {
+ 		mii_free = mip->mii_next;
+@@ -745,32 +1082,32 @@ mii_queue(struct net_device *dev, int re
+ 			mii_tail = mip;
+ 		} else {
+ 			mii_head = mii_tail = mip;
+-			fep->hwp->fec_mii_data = regval;
++			fec_reg_write(fep, FEC_MMFR, regval);
+ 		}
+ 	} else {
+ 		retval = 1;
+ 	}
+ 
+-	spin_unlock_irqrestore(&fep->mii_lock, flags);
+-	return retval;
++	spin_unlock_irqrestore(&fep->lock,flags);
++
++	return(retval);
+ }
+ 
+ static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
+ {
+-	if(!c)
+-		return;
++	int k;
+ 
+-	for (; c->mii_data != mk_mii_end; c++)
+-		mii_queue(dev, c->mii_data, c->funct);
++	for (k = 0; c != NULL && c[k].mii_data != mk_mii_end; k++) {
++		mii_queue(dev, c[k].mii_data, c[k].funct);
++	}
+ }
+ 
+ static void mii_parse_sr(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
++	status = fep->phy_status & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
+ 
+ 	if (mii_reg & 0x0004)
+ 		status |= PHY_STAT_LINK;
+@@ -778,31 +1115,30 @@ static void mii_parse_sr(uint mii_reg, s
+ 		status |= PHY_STAT_FAULT;
+ 	if (mii_reg & 0x0020)
+ 		status |= PHY_STAT_ANC;
+-	*s = status;
++
++	fep->phy_status = status;
+ }
+ 
+ static void mii_parse_cr(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP);
++	status = fep->phy_status & ~(PHY_CONF_ANE | PHY_CONF_LOOP);
+ 
+ 	if (mii_reg & 0x1000)
+ 		status |= PHY_CONF_ANE;
+ 	if (mii_reg & 0x4000)
+ 		status |= PHY_CONF_LOOP;
+-	*s = status;
++	fep->phy_status = status;
+ }
+ 
+ static void mii_parse_anar(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_CONF_SPMASK);
++	status = fep->phy_status & ~(PHY_CONF_SPMASK);
+ 
+ 	if (mii_reg & 0x0020)
+ 		status |= PHY_CONF_10HDX;
+@@ -812,7 +1148,7 @@ static void mii_parse_anar(uint mii_reg,
+ 		status |= PHY_CONF_100HDX;
+ 	if (mii_reg & 0x00100)
+ 		status |= PHY_CONF_100FDX;
+-	*s = status;
++	fep->phy_status = status;
+ }
+ 
+ /* ------------------------------------------------------------------------- */
+@@ -827,10 +1163,9 @@ static void mii_parse_anar(uint mii_reg,
+ static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_STAT_SPMASK);
++	status = fep->phy_status & ~(PHY_STAT_SPMASK);
+ 	if (mii_reg & 0x0800) {
+ 		if (mii_reg & 0x1000)
+ 			status |= PHY_STAT_100FDX;
+@@ -842,7 +1177,7 @@ static void mii_parse_lxt970_csr(uint mi
+ 		else
+ 			status |= PHY_STAT_10HDX;
+ 	}
+-	*s = status;
++	fep->phy_status = status;
+ }
+ 
+ static phy_cmd_t const phy_cmd_lxt970_config[] = {
+@@ -898,16 +1233,15 @@ static phy_info_t const phy_info_lxt970 
+ static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
++	status = fep->phy_status & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
+ 
+ 	if (mii_reg & 0x0400) {
+-		fep->link = 1;
++		fep->linkstatus = 1;
+ 		status |= PHY_STAT_LINK;
+ 	} else {
+-		fep->link = 0;
++		fep->linkstatus = 0;
+ 	}
+ 	if (mii_reg & 0x0080)
+ 		status |= PHY_STAT_ANC;
+@@ -925,7 +1259,7 @@ static void mii_parse_lxt971_sr2(uint mi
+ 	if (mii_reg & 0x0008)
+ 		status |= PHY_STAT_FAULT;
+ 
+-	*s = status;
++	fep->phy_status = status;
+ }
+ 
+ static phy_cmd_t const phy_cmd_lxt971_config[] = {
+@@ -982,10 +1316,9 @@ static phy_info_t const phy_info_lxt971 
+ static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_STAT_SPMASK);
++	status = fep->phy_status & ~(PHY_STAT_SPMASK);
+ 
+ 	switch((mii_reg >> 2) & 7) {
+ 	case 1: status |= PHY_STAT_10HDX; break;
+@@ -994,7 +1327,7 @@ static void mii_parse_qs6612_pcr(uint mi
+ 	case 6: status |= PHY_STAT_100FDX; break;
+ }
+ 
+-	*s = status;
++	fep->phy_status = status;
+ }
+ 
+ static phy_cmd_t const phy_cmd_qs6612_config[] = {
+@@ -1052,10 +1385,9 @@ static phy_info_t const phy_info_qs6612 
+ static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 	uint status;
+ 
+-	status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC);
++	status = fep->phy_status & ~(PHY_STAT_SPMASK | PHY_STAT_ANC);
+ 
+ 	if (mii_reg & 0x0080)
+ 		status |= PHY_STAT_ANC;
+@@ -1064,7 +1396,7 @@ static void mii_parse_am79c874_dr(uint m
+ 	else
+ 		status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX);
+ 
+-	*s = status;
++	fep->phy_status = status;
+ }
+ 
+ static phy_cmd_t const phy_cmd_am79c874_config[] = {
+@@ -1107,7 +1439,7 @@ static phy_info_t const phy_info_am79c87
+ /* register definitions for the 8721 */
+ 
+ #define MII_KS8721BL_RXERCR	21
+-#define MII_KS8721BL_ICSR	27
++#define MII_KS8721BL_ICSR	22
+ #define	MII_KS8721BL_PHYCR	31
+ 
+ static phy_cmd_t const phy_cmd_ks8721bl_config[] = {
+@@ -1149,32 +1481,31 @@ static phy_info_t const phy_info_ks8721b
+ static void mii_parse_dp8384x_sr2(uint mii_reg, struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
+ 
+-	*s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
++	fep->phy_status &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC);
+ 
+ 	/* Link up */
+ 	if (mii_reg & 0x0001) {
+-		fep->link = 1;
+-		*s |= PHY_STAT_LINK;
++		fep->linkstatus = 1;
++		fep->phy_status |= PHY_STAT_LINK;
+ 	} else
+-		fep->link = 0;
++		fep->linkstatus = 0;
+ 	/* Status of link */
+ 	if (mii_reg & 0x0010)   /* Autonegotioation complete */
+-		*s |= PHY_STAT_ANC;
++		fep->phy_status |= PHY_STAT_ANC;
+ 	if (mii_reg & 0x0002) {   /* 10MBps? */
+ 		if (mii_reg & 0x0004)   /* Full Duplex? */
+-			*s |= PHY_STAT_10FDX;
++			fep->phy_status |= PHY_STAT_10FDX;
+ 		else
+-			*s |= PHY_STAT_10HDX;
++			fep->phy_status |= PHY_STAT_10HDX;
+ 	} else {                  /* 100 Mbps? */
+ 		if (mii_reg & 0x0004)   /* Full Duplex? */
+-			*s |= PHY_STAT_100FDX;
++			fep->phy_status |= PHY_STAT_100FDX;
+ 		else
+-			*s |= PHY_STAT_100HDX;
++			fep->phy_status |= PHY_STAT_100HDX;
+ 	}
+ 	if (mii_reg & 0x0008)
+-		*s |= PHY_STAT_FAULT;
++		fep->phy_status |= PHY_STAT_FAULT;
+ }
+ 
+ static phy_info_t phy_info_dp83848= {
+@@ -1211,92 +1542,362 @@ static phy_info_t const * const phy_info
+ 	&phy_info_dp83848,
+ 	NULL
+ };
+-
+-/* ------------------------------------------------------------------------- */
+-#ifdef HAVE_mii_link_interrupt
+-static irqreturn_t
+-mii_link_interrupt(int irq, void * dev_id);
++#endif
+ 
+ /*
+- *	This is specific to the MII interrupt setup of the M5272EVB.
++ * do some initializtion based architecture of this chip
++MOVED to platform_data hooks!
+  */
+-static void __inline__ fec_request_mii_intr(struct net_device *dev)
+-{
+-	if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0)
+-		printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
+-}
+ 
+-static void __inline__ fec_disable_phy_intr(void)
+-{
+-	volatile unsigned long *icrp;
+-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+-	*icrp = 0x08000000;
+-}
++#define PHY_POLL_LINK_ON	(1 * HZ)
++#define PHY_POLL_LINK_OFF	(HZ / 5)
+ 
+-static void __inline__ fec_phy_ack_intr(void)
++static int fec_mii_read(struct mii_bus *bus, int phy_id, int regnum);
++
++#ifdef CONFIG_PHYLIB
++static void fec_link_change(struct net_device *dev)
+ {
+-	volatile unsigned long *icrp;
+-	/* Acknowledge the interrupt */
+-	icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+-	*icrp = 0x0d000000;
+-}
+-#endif
++	struct fec_enet_private *fep = netdev_priv(dev);
++	struct phy_device *phydev = fep->phy;
+ 
+-#ifdef CONFIG_M5272
+-static void __inline__ fec_get_mac(struct net_device *dev)
++	if (phydev->link != fep->linkstatus ||
++	    phydev->duplex != fep->full_duplex) {
++		DBG(0, "%s: link status changed from %d to %d %s -> %s duplex\n", __FUNCTION__,
++		    fep->linkstatus, phydev->link, fep->full_duplex ? "full" : "half",
++		    phydev->duplex ? "full" : "half");
++		if (phydev->link) {
++			fec_restart(dev, phydev->duplex);
++		} else {
++			fec_stop(dev);
++		}
++		if (fep->linkstatus != phydev->link && netif_msg_link(fep)) {
++			phy_print_status(phydev);
++		}
++		fep->linkstatus = phydev->link;
++#if 0
++		int i;
++		for (i = 0; i < 32; i++) {
++			DBG(0, "%s: PHY reg[%02x]=%04x\n", __FUNCTION__, i,
++			    fec_mii_read(fep->mii, fep->phy_addr, i));
++		}
++#endif
++	}
++}
++#else
++static void fec_link_change(struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile fec_t *fecp;
+-	unsigned char *iap, tmpaddr[ETH_ALEN];
+ 
+-	fecp = fep->hwp;
++	DBG(0, "%s: link status changed from %d to %d\n", __FUNCTION__,
++	    fep->old_linkstatus, fep->linkstatus);
++	if (fep->linkstatus) {
++		int duplex;
+ 
+-	if (FEC_FLASHMAC) {
+-		/*
+-		 * Get MAC address from FLASH.
+-		 * If it is all 1's or 0's, use the default.
+-		 */
+-		iap = (unsigned char *)FEC_FLASHMAC;
+-		if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
+-		    (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
+-			iap = fec_mac_default;
+-		if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
+-		    (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
+-			iap = fec_mac_default;
++		duplex = 0;
++		if (fep->phy_status & (PHY_STAT_100FDX | PHY_STAT_10FDX)) {
++			duplex = 1;
++		}
++		fec_restart(dev, duplex);
++		if (fep->phy_timer) {
++			mod_timer(fep->phy_timer, jiffies + PHY_POLL_LINK_ON);
++		}
+ 	} else {
+-		*((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
+-		*((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
+-		iap = &tmpaddr[0];
++		fec_stop(dev);
++		if (fep->phy_timer) {
++			mod_timer(fep->phy_timer, jiffies + PHY_POLL_LINK_OFF);
++		}
+ 	}
+ 
+-	memcpy(dev->dev_addr, iap, ETH_ALEN);
+-
+-	/* Adjust MAC if using default MAC address */
+-	if (iap == fec_mac_default)
+-		 dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
++	fep->old_linkstatus = fep->linkstatus;
+ }
+-#endif
+ 
+-/* ------------------------------------------------------------------------- */
+-
+-static void mii_display_status(struct net_device *dev)
++static void fec_phy_timer(unsigned long data)
+ {
++	struct net_device *dev = (struct net_device *)data;
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	volatile uint *s = &(fep->phy_status);
++	int link_poll_interval = fep->linkstatus ? PHY_POLL_LINK_ON : PHY_POLL_LINK_OFF;
+ 
+-	if (!fep->link && !fep->old_link) {
+-		/* Link is still down - don't print anything */
++	if (fep->old_linkstatus != fep->linkstatus) {
++		fec_link_change(dev);
++	}
++	mod_timer(fep->phy_timer, link_poll_interval);
++}
++#endif
++
++/*
++ * Code specific to Freescale i.MXC
++ */
++static int fec_request_intrs(struct platform_device *pdev, struct net_device *dev)
++{
++	int ret;
++	struct fec_enet_private *fep = netdev_priv(dev);
++
++	fep->etn_irq = platform_get_irq(pdev, 0);
++	fep->mii_irq = platform_get_irq(pdev, 1);
++
++	/* Setup interrupt handlers. */
++	ret = request_irq(fep->etn_irq, fec_enet_interrupt, 0, "fec", dev);
++	if (ret != 0) {
++		printk(KERN_ERR "FEC: Could not allocate FEC IRQ(%d)!\n", fep->etn_irq);
++		return ret;
++	}
++#ifndef CONFIG_PHYLIB
++	if (fep->mii_irq >= 0) {
++		/* TODO: disable now due to CPLD issue */
++		ret = request_irq(fep->mii_irq, mii_link_interrupt, 0, "fec(MII)", dev);
++		if (ret != 0) {
++			printk(KERN_ERR "FEC: Could not allocate FEC(MII) IRQ(%d)!\n",
++			       fep->mii_irq);
++			free_irq(fep->etn_irq, dev);
++			return ret;
++		}
++		/*
++		 * board specific workaround should be done in board specific code
++		 * This is unsafe anyway. An interrupt might have been asserted
++		 * already. Use IRQ_NOAUTOEN with request_irq() to have irq initially disabled.
++		 */
++		fep->phy_int_enabled = 1;
++	} else {
++		fep->phy_timer = kzalloc(sizeof(struct timer_list), GFP_KERNEL);
++		if (fep->phy_timer == NULL) {
++			free_irq(fep->etn_irq, dev);
++			return -ENOMEM;
++		}
++		init_timer(fep->phy_timer);
++		fep->phy_timer->function = fec_phy_timer;
++		fep->phy_timer->data = (unsigned long)dev;
++		fec_link_change(dev);
++	}
++#endif
++
++	return 0;
++}
++
++static void fec_release_intrs(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++
++	free_irq(fep->etn_irq, dev);
++#ifndef CONFIG_PHYLIB
++	if (fep->mii_irq >= 0) {
++		free_irq(fep->mii_irq, dev);
++	}
++#endif
++}
++
++#ifdef CONFIG_MACH_MX25
++/*
++ * i.MX25 allows RMII mode to be configured via a gasket
++ */
++#define FEC_MIIGSK_CFGR			0x300
++#define FEC_MIIGSK_ENR			0x308
++
++#define FEC_MIIGSK_CFGR_FRCONT		(1 << 6)
++#define FEC_MIIGSK_CFGR_LBMODE		(1 << 4)
++#define FEC_MIIGSK_CFGR_EMODE		(1 << 3)
++#define FEC_MIIGSK_CFGR_IF_MODE_MASK	(3 << 0)
++#define FEC_MIIGSK_CFGR_IF_MODE_MII	(0 << 0)
++#define FEC_MIIGSK_CFGR_IF_MODE_RMII	(1 << 0)
++
++#define FEC_MIIGSK_ENR_READY		(1 << 2)
++#define FEC_MIIGSK_ENR_EN		(1 << 1)
++
++#ifndef DEBUG
++static inline unsigned long fec_reg_read16(struct fec_enet_private *fep, unsigned int reg)
++{
++	return readw(fep->reg_base + reg);
++}
++
++static inline void fec_reg_write(struct fec_enet_private *fep, unsigned int reg, unsigned long val)
++{
++	writew(val, fep->reg_base + reg);
++}
++#else
++#define fec_reg_read16(fep, reg)	__fec_reg_read16(fep, reg, __FUNCTION__, #reg)
++#define fec_reg_write16(fep, reg, val)	__fec_reg_write16(fep, reg, val, __FUNCTION__, #reg)
++
++static inline u16 __fec_reg_read16(struct fec_enet_private *fep, unsigned int reg,
++					   const char *func, const char *reg_name)
++{
++	u16 val = readw(fep->reg_base + reg);
++	DBG(0, "%s: Read %04x from %s(%03x)\n", func, val, reg_name, reg);
++	return val;
++}
++
++static inline void __fec_reg_write16(struct fec_enet_private *fep, unsigned int reg,
++				   u16 val, const char *func, const char *reg_name)
++{
++	DBG(0, "%s: Writing %04x to %s(%03x)\n", func, val, reg_name, reg);
++	writew(val, fep->reg_base + reg);
++}
++#endif
++
++static void fec_localhw_setup(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++	int loops;
++	const int max_loops = 10000;
++
++	/*
++	 * Set up the MII gasket for RMII mode
++	 */
++	dev_dbg(&dev->dev, "enable RMII gasket\n");
++
++	/* disable the gasket and wait */
++	fec_reg_write16(fep, FEC_MIIGSK_ENR, 0);
++	DBG(0, "%s: Waiting for RMII gasket idle\n", __FUNCTION__);
++	while (fec_reg_read16(fep, FEC_MIIGSK_ENR) & FEC_MIIGSK_ENR_READY)
++		udelay(1);
++	DBG(0, "%s: RMII gasket idle\n", __FUNCTION__);
++
++	/* configure the gasket for RMII, 50 MHz, no loopback, no echo */
++	fec_reg_write16(fep, FEC_MIIGSK_CFGR, FEC_MIIGSK_CFGR_IF_MODE_RMII);
++
++	/* re-enable the gasket */
++	fec_reg_write16(fep, FEC_MIIGSK_ENR, FEC_MIIGSK_ENR_EN);
++	fec_reg_read16(fep, FEC_MIIGSK_CFGR);
++	fec_reg_read16(fep, FEC_MIIGSK_ENR);
++
++#if 1
++	DBG(0, "%s: Waiting for RMII gasket ready\n", __FUNCTION__);
++	for (loops = 0; loops < max_loops; loops++) {
++		if (readw(fep->reg_base + FEC_MIIGSK_ENR) & FEC_MIIGSK_ENR_READY)
++			break;
++		udelay(1);
++	}
++	if (fec_reg_read16(fep, FEC_MIIGSK_ENR) & FEC_MIIGSK_ENR_READY) {
++		DBG(0, "%s: RMII gasket ready after %u loops\n", __FUNCTION__, loops);
++	} else {
++		DBG(0, "%s: RMII gasket NOT ready after %u loops\n", __FUNCTION__, loops);
++	}
++#endif
++}
++#else
++static inline void fec_localhw_setup(struct net_device *dev)
++{
++}
++#endif
++
++static int fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
++{
++	unsigned long rate;
++	struct clk *clk;
++
++	DBG(0, "%s: \n", __FUNCTION__);
++
++	fec_reg_write(fep, FEC_RCR, OPT_FRAME_SIZE | RCR_MII_MODE);
++	fec_reg_write(fep, FEC_TCR, 0x00);
++
++	/*
++	 * Set MII speed to 2.5 MHz
++	 */
++	clk = clk_get(fep->dma_dev, NULL);
++	if (!IS_ERR(clk)) {
++	rate = clk_get_rate(clk);
++	clk_put(clk);
++	} else {
++		printk(KERN_ERR "Failed to get fec clock: %ld\n", PTR_ERR(clk));
++		return PTR_ERR(clk);
++	}
++	fep->phy_speed = ((((rate + 4999999) / 2500000) / 2) & 0x3F) << 1;
++	fec_reg_write(fep, FEC_MSCR, fep->phy_speed);
++	DBG(0, "%s: clkdiv set to %u for MII clock %u at base clock %lu\n",
++	    __FUNCTION__, fep->phy_speed >> 1, 2500000, rate);
++	DBG(0, "%s: actual MII clock is: %lu\n", __FUNCTION__, rate / (fep->phy_speed));
++
++	return 0;
++}
++
++static const unsigned char default_mac[ETH_ALEN] = {
++	0x00, 0x04, 0x9f, 0x00, 0x74, 0x4a,
++};
++
++#define FEC_IIM_BASE    IO_ADDRESS(IIM_BASE_ADDR)
++static void fec_get_mac(struct net_device *dev)
++{
++#if 1
++	// keep bootloader assigned MAC address
++	struct fec_enet_private *fep = netdev_priv(dev);
++	unsigned long eth_addr = fec_reg_read(fep, FEC_PALR);
++	dev->dev_addr[0] = eth_addr >> 24;
++	dev->dev_addr[1] = eth_addr >> 16;
++	dev->dev_addr[2] = eth_addr >> 8;
++	dev->dev_addr[3] = eth_addr >> 0;
++	eth_addr = fec_reg_read(fep, FEC_PAUR);
++	dev->dev_addr[5] = eth_addr >> 16;
++	dev->dev_addr[4] = eth_addr >> 24;
++#else
++	int i;
++	unsigned long fec_mac_base = FEC_IIM_BASE + MXC_IIMKEY0;
++
++	if (cpu_is_mx27_rev(CHIP_REV_2_0) > 0) {
++		fec_mac_base = FEC_IIM_BASE + MXC_IIMMAC;
++	}
++
++	DBG(0, "%s: Reading MAC address from %08lx\n", __FUNCTION__, fec_mac_base);
++	for (i = 0; i < ETH_ALEN; i++) {
++		dev->dev_addr[ETH_ALEN - 1 - i] = __raw_readb(fec_mac_base + i * 4);
++	}
++	//memcpy(dev->dev_addr, default_mac, ETH_ALEN);
++#endif
++}
++
++#ifdef CONFIG_PHYLIB
++static inline void fec_enable_phy_intr(struct fec_enet_private *fep)
++{
++}
++static inline void fec_disable_phy_intr(struct fec_enet_private *fep)
++{
++}
++static inline void fec_phy_ack_intr(struct fec_enet_private *fep)
++{
++}
++#else
++static inline void fec_enable_phy_intr(struct fec_enet_private *fep)
++{
++	if (!fep->phy_int_enabled) {
++		fep->phy_int_enabled = 1;
++		enable_irq(fep->mii_irq);
++	}
++}
++
++static inline void fec_disable_phy_intr(struct fec_enet_private *fep)
++{
++	if (fep->phy_int_enabled) {
++		disable_irq(fep->mii_irq);
++		fep->phy_int_enabled = 0;
++	}
++}
++
++static inline void fec_phy_ack_intr(struct fec_enet_private *fep)
++{
++	if (fep->phy_int_enabled) {
++		disable_irq(fep->mii_irq);
++		fep->phy_int_enabled = 0;
++	}
++}
++#endif
++
++/* ------------------------------------------------------------------------- */
++
++#ifndef CONFIG_PHYLIB
++static void mii_display_status(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++
++	if (!fep->linkstatus && !fep->old_linkstatus) {
++		/* Link is still down - don't print anything */
+ 		return;
+ 	}
+ 
+ 	printk("%s: status: ", dev->name);
+ 
+-	if (!fep->link) {
++	if (!fep->linkstatus) {
+ 		printk("link down");
+ 	} else {
+ 		printk("link up");
+ 
+-		switch(*s & PHY_STAT_SPMASK) {
++		switch(fep->phy_status & PHY_STAT_SPMASK) {
+ 		case PHY_STAT_100FDX: printk(", 100MBit Full Duplex"); break;
+ 		case PHY_STAT_100HDX: printk(", 100MBit Half Duplex"); break;
+ 		case PHY_STAT_10FDX: printk(", 10MBit Full Duplex"); break;
+@@ -1305,20 +1906,19 @@ static void mii_display_status(struct ne
+ 			printk(", Unknown speed/duplex");
+ 		}
+ 
+-		if (*s & PHY_STAT_ANC)
++		if (fep->phy_status & PHY_STAT_ANC)
+ 			printk(", auto-negotiation complete");
+ 	}
+ 
+-	if (*s & PHY_STAT_FAULT)
++	if (fep->phy_status & PHY_STAT_FAULT)
+ 		printk(", remote fault");
+ 
+ 	printk(".\n");
+ }
+ 
+-static void mii_display_config(struct work_struct *work)
++static void mii_display_config(struct work_struct *w)
+ {
+-	struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
+-	struct net_device *dev = fep->netdev;
++	struct fec_enet_private *fep = container_of(w, struct fec_enet_private, phy_task);
+ 	uint status = fep->phy_status;
+ 
+ 	/*
+@@ -1326,7 +1926,7 @@ static void mii_display_config(struct wo
+ 	** the workqueue.  It is thus safe to allow to reuse it.
+ 	*/
+ 	fep->mii_phy_task_queued = 0;
+-	printk("%s: config: auto-negotiation ", dev->name);
++	//printk("%s: config: auto-negotiation ", dev->name);
+ 
+ 	if (status & PHY_CONF_ANE)
+ 		printk("on");
+@@ -1351,11 +1951,21 @@ static void mii_display_config(struct wo
+ 
+ 	fep->sequence_done = 1;
+ }
++#endif
+ 
+-static void mii_relink(struct work_struct *work)
++#ifndef CONFIG_PHYLIB
++static inline void *priv_netdev(struct fec_enet_private  *fep)
+ {
+-	struct fec_enet_private *fep = container_of(work, struct fec_enet_private, phy_task);
+-	struct net_device *dev = fep->netdev;
++	/* ugly hack, stolen from include linux/netdevice.h */
++	return (char *)fep - ((sizeof(struct net_device)
++			       + NETDEV_ALIGN_CONST)
++			      & ~NETDEV_ALIGN_CONST);
++}
++
++static void mii_relink(struct work_struct *w)
++{
++	struct fec_enet_private *fep = container_of(w, struct fec_enet_private, phy_task);
++	struct net_device *dev = priv_netdev(fep);
+ 	int duplex;
+ 
+ 	/*
+@@ -1363,23 +1973,19 @@ static void mii_relink(struct work_struc
+ 	** the workqueue.  It is thus safe to allow to reuse it.
+ 	*/
+ 	fep->mii_phy_task_queued = 0;
+-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
++	fep->linkstatus = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
+ 	mii_display_status(dev);
+-	fep->old_link = fep->link;
++	fep->old_linkstatus = fep->linkstatus;
+ 
+-	if (fep->link) {
++	if (fep->linkstatus) {
+ 		duplex = 0;
+-		if (fep->phy_status
+-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
++		if (fep->phy_status & (PHY_STAT_100FDX | PHY_STAT_10FDX)) {
+ 			duplex = 1;
++		}
+ 		fec_restart(dev, duplex);
+-	} else
++	} else {
+ 		fec_stop(dev);
+-
+-#if 0
+-	enable_irq(fep->mii_irq);
+-#endif
+-
++	}
+ }
+ 
+ /* mii_queue_relink is called in interrupt context from mii_link_interrupt */
+@@ -1429,15 +2035,14 @@ phy_cmd_t const phy_cmd_config[] = {
+ static void
+ mii_discover_phy3(uint mii_reg, struct net_device *dev)
+ {
+-	struct fec_enet_private *fep;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 	int i;
+ 
+-	fep = netdev_priv(dev);
+ 	fep->phy_id |= (mii_reg & 0xffff);
+ 	printk("fec: PHY @ 0x%x, ID 0x%08x", fep->phy_addr, fep->phy_id);
+ 
+-	for(i = 0; phy_info[i]; i++) {
+-		if(phy_info[i]->id == (fep->phy_id >> 4))
++	for (i = 0; phy_info[i]; i++) {
++		if (phy_info[i]->id == (fep->phy_id >> 4))
+ 			break;
+ 	}
+ 
+@@ -1456,13 +2061,9 @@ mii_discover_phy3(uint mii_reg, struct n
+ static void
+ mii_discover_phy(uint mii_reg, struct net_device *dev)
+ {
+-	struct fec_enet_private *fep;
+-	volatile fec_t *fecp;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 	uint phytype;
+ 
+-	fep = netdev_priv(dev);
+-	fecp = fep->hwp;
+-
+ 	if (fep->phy_addr < 32) {
+ 		if ((phytype = (mii_reg & 0xffff)) != 0xffff && phytype != 0) {
+ 
+@@ -1470,39 +2071,40 @@ mii_discover_phy(uint mii_reg, struct ne
+ 			*/
+ 			fep->phy_id = phytype << 16;
+ 			mii_queue(dev, mk_mii_read(MII_REG_PHYIR2),
+-							mii_discover_phy3);
++				  mii_discover_phy3);
+ 		} else {
+ 			fep->phy_addr++;
+ 			mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
+-							mii_discover_phy);
++				  mii_discover_phy);
+ 		}
+ 	} else {
+ 		printk("FEC: No PHY device found.\n");
+ 		/* Disable external MII interface */
+-		fecp->fec_mii_speed = fep->phy_speed = 0;
+-#ifdef HAVE_mii_link_interrupt
+-		fec_disable_phy_intr();
+-#endif
++		fec_disable_phy_intr(fep);
++		fec_reg_write(fep, FEC_MSCR, 0);
+ 	}
+ }
++#endif
+ 
+-/* This interrupt occurs when the PHY detects a link change.
+-*/
+-#ifdef HAVE_mii_link_interrupt
++#ifndef CONFIG_PHYLIB
+ static irqreturn_t
+-mii_link_interrupt(int irq, void * dev_id)
++mii_link_interrupt(int irq, void *dev_id)
+ {
+-	struct	net_device *dev = dev_id;
++	struct net_device *dev = dev_id;
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+ 
+-	fec_phy_ack_intr();
++	DBG(0, "%s: \n", __FUNCTION__);
+ 
+-#if 0
+-	disable_irq(fep->mii_irq);  /* disable now, enable later */
+-#endif
++	fec_phy_ack_intr(fep);
+ 
+-	mii_do_cmd(dev, fep->phy->ack_int);
+-	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
++	/*
++	 * Some board will trigger phy interrupt before phy enable.
++	 * And at that moment , fep->phy is not initialized.
++	 */
++	if (fep->phy) {
++		mii_do_cmd(dev, fep->phy->ack_int);
++		mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
++	}
+ 
+ 	return IRQ_HANDLED;
+ }
+@@ -1511,16 +2113,31 @@ mii_link_interrupt(int irq, void * dev_i
+ static int
+ fec_enet_open(struct net_device *dev)
+ {
++	int ret = 0;
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+ 
+ 	/* I should reset the ring buffers here, but I don't yet know
+ 	 * a simple way to do that.
+ 	 */
+-	fec_set_mac_address(dev);
++	DBG(0, "%s: \n", __FUNCTION__);
++	_fec_set_mac_address(dev);
+ 
+-	fep->sequence_done = 0;
+-	fep->link = 0;
++#ifdef CONFIG_PHYLIB
++	fec_restart(dev, 0);
+ 
++	ret = fec_connect_phy(dev, fep);
++	if (ret != 0) {
++		DBG(0, "%s: Failed to connect to PHY: %d\n", __FUNCTION__, ret);
++		return ret;
++	}
++	phy_start(fep->phy);
++
++	fep->linkstatus = fep->phy->link;
++	//fec_restart(dev, 0);
++	DBG(0, "%s: Link status is: %d\n", __FUNCTION__, fep->linkstatus);
++#else
++	fep->linkstatus = 0;
++	fep->sequence_done = 0;
+ 	if (fep->phy) {
+ 		mii_do_cmd(dev, fep->phy->ack_int);
+ 		mii_do_cmd(dev, fep->phy->config);
+@@ -1542,16 +2159,20 @@ fec_enet_open(struct net_device *dev)
+ 		 * based on this device does not implement a PHY interrupt,
+ 		 * so we are never notified of link change.
+ 		 */
+-		fep->link = 1;
++		fep->linkstatus = 1;
+ 	} else {
+-		fep->link = 1; /* lets just try it and see */
++		fep->linkstatus = 1; /* lets just try it and see */
+ 		/* no phy,  go full duplex,  it's most likely a hub chip */
+ 		fec_restart(dev, 1);
+ 	}
+-
+-	netif_start_queue(dev);
++	fep->old_linkstatus = fep->linkstatus;
++#endif
+ 	fep->opened = 1;
+-	return 0;		/* Success */
++#if 1
++	/* enable receiver */
++	fec_reg_write(fep, FEC_RDAR, DONT_CARE);
++#endif
++	return ret;
+ }
+ 
+ static int
+@@ -1559,15 +2180,46 @@ fec_enet_close(struct net_device *dev)
+ {
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+ 
+-	/* Don't know what to do yet.
+-	*/
++	DBG(0, "%s: \n", __FUNCTION__);
++
+ 	fep->opened = 0;
+-	netif_stop_queue(dev);
+-	fec_stop(dev);
++	if (fep->linkstatus) {
++		fec_stop(dev);
++	}
++#ifdef CONFIG_PHYLIB
++	if (fep->phy) {
++		DBG(0, "%s: Stopping PHY %p\n", __FUNCTION__, fep->phy);
++		phy_stop(fep->phy);
+ 
++		DBG(0, "%s: Disconnecting PHY %p\n", __FUNCTION__, fep->phy);
++		phy_disconnect(fep->phy);
++		fep->phy = NULL;
++	}
++#endif
++#if 1
++	/* Whack a reset.  We should wait for this.
++	*/
++	fec_reg_write(fep, FEC_ECR, FEC_ECR_RESET);
++	udelay(10);
++
++	/* Mask and clear outstanding MII command interrupts.
++	*/
++	fec_reg_write(fep, FEC_EIMR, 0);
++	fec_reg_write(fep, FEC_EIR, FEC_ENET_MII);
++	fec_disable_phy_intr(fep);
++	/* Switch off MII */
++	fec_reg_write(fep, FEC_MSCR, 0);
++#endif
+ 	return 0;
+ }
+ 
++static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
++{
++	struct fec_enet_private *fep = netdev_priv(dev);
++
++	return &fep->stats;
++}
++
+ /* Set or clear the multicast filter for this adaptor.
+  * Skeleton taken from sunlance driver.
+  * The CPM Ethernet implementation allows Multicast as well as individual
+@@ -1583,37 +2235,32 @@ fec_enet_close(struct net_device *dev)
+ 
+ static void set_multicast_list(struct net_device *dev)
+ {
+-	struct fec_enet_private *fep;
+-	volatile fec_t *ep;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 	struct dev_mc_list *dmi;
+ 	unsigned int i, j, bit, data, crc;
+ 	unsigned char hash;
+ 
+-	fep = netdev_priv(dev);
+-	ep = fep->hwp;
+-
+-	if (dev->flags&IFF_PROMISC) {
+-		ep->fec_r_cntrl |= 0x0008;
++	if (dev->flags & IFF_PROMISC) {
++		fec_reg_write(fep, FEC_RCR, fec_reg_read(fep, FEC_RCR) | RCR_PROM);
+ 	} else {
+ 
+-		ep->fec_r_cntrl &= ~0x0008;
++		fec_reg_write(fep, FEC_RCR, fec_reg_read(fep, FEC_RCR) & ~RCR_PROM);
+ 
+ 		if (dev->flags & IFF_ALLMULTI) {
+ 			/* Catch all multicast addresses, so set the
+ 			 * filter to all 1's.
+ 			 */
+-			ep->fec_grp_hash_table_high = 0xffffffff;
+-			ep->fec_grp_hash_table_low = 0xffffffff;
++			fec_reg_write(fep, FEC_IAUR, ~0);
++			fec_reg_write(fep, FEC_IALR, ~0);
+ 		} else {
+ 			/* Clear filter and add the addresses in hash register.
+ 			*/
+-			ep->fec_grp_hash_table_high = 0;
+-			ep->fec_grp_hash_table_low = 0;
++			fec_reg_write(fep, FEC_IAUR, 0);
++			fec_reg_write(fep, FEC_IALR, 0);
+ 
+ 			dmi = dev->mc_list;
+ 
+-			for (j = 0; j < dev->mc_count; j++, dmi = dmi->next)
+-			{
++			for (j = 0; j < dev->mc_count; j++, dmi = dmi->next) {
+ 				/* Only support group multicast for now.
+ 				*/
+ 				if (!(dmi->dmi_addr[0] & 1))
+@@ -1621,13 +2268,11 @@ static void set_multicast_list(struct ne
+ 
+ 				/* calculate crc32 value of mac address
+ 				*/
+-				crc = 0xffffffff;
++				crc = ~0;
+ 
+-				for (i = 0; i < dmi->dmi_addrlen; i++)
+-				{
++				for (i = 0; i < dmi->dmi_addrlen; i++) {
+ 					data = dmi->dmi_addr[i];
+-					for (bit = 0; bit < 8; bit++, data >>= 1)
+-					{
++					for (bit = 0; bit < 8; bit++, data >>= 1) {
+ 						crc = (crc >> 1) ^
+ 						(((crc ^ data) & 1) ? CRC32_POLY : 0);
+ 					}
+@@ -1639,9 +2284,13 @@ static void set_multicast_list(struct ne
+ 				hash = (crc >> (32 - HASH_BITS)) & 0x3f;
+ 
+ 				if (hash > 31)
+-					ep->fec_grp_hash_table_high |= 1 << (hash - 32);
++					fec_reg_write(fep, FEC_IAUR,
++						      fec_reg_read(fep, FEC_IAUR) |
++						      (1 << (hash - 32)));
+ 				else
+-					ep->fec_grp_hash_table_low |= 1 << hash;
++					fec_reg_write(fep, FEC_IALR,
++						      fec_reg_read(fep, FEC_IALR) |
++						      (1 << hash));
+ 			}
+ 		}
+ 	}
+@@ -1650,106 +2299,272 @@ static void set_multicast_list(struct ne
+ /* Set a MAC change in hardware.
+  */
+ static void
+-fec_set_mac_address(struct net_device *dev)
++_fec_set_mac_address(struct net_device *dev)
+ {
+-	volatile fec_t *fecp;
+-
+-	fecp = ((struct fec_enet_private *)netdev_priv(dev))->hwp;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 
+ 	/* Set station address. */
+-	fecp->fec_addr_low = dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
+-		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24);
+-	fecp->fec_addr_high = (dev->dev_addr[5] << 16) |
+-		(dev->dev_addr[4] << 24);
++	fec_reg_write(fep, FEC_PALR, dev->dev_addr[3] | (dev->dev_addr[2] << 8) |
++		(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24));
++	fec_reg_write(fep, FEC_PAUR, (dev->dev_addr[5] << 16) |
++		(dev->dev_addr[4] << 24));
++}
++
++static int
++fec_set_mac_address(struct net_device *dev, void *_addr)
++{
++	struct sockaddr *addr = _addr;
++
++	if (!is_valid_ether_addr((const char *)&addr->sa_data)) {
++		printk(KERN_WARNING "Bad ethernet address: %02x:%02x:%02x:%02x:%02x:%02x\n",
++		       addr->sa_data[0], addr->sa_data[1], addr->sa_data[2], addr->sa_data[3],
++		       addr->sa_data[4], addr->sa_data[5]);
++		return -EINVAL;
++	}
++	printk(KERN_DEBUG "Setting MAC address to %02x:%02x:%02x:%02x:%02x:%02x\n",
++	       addr->sa_data[0], addr->sa_data[1], addr->sa_data[2], addr->sa_data[3],
++	       addr->sa_data[4], addr->sa_data[5]);
++
++	memcpy(&dev->dev_addr, &addr->sa_data, ETH_ALEN);
+ 
++	_fec_set_mac_address(dev);
++
++	return 0;
+ }
+ 
+- /*
+-  * XXX:  We need to clean up on failure exits here.
+-  *
+-  * index is only used in legacy code
+-  */
+-int __init fec_enet_init(struct net_device *dev, int index)
++static void fec_enet_free_buffers(struct fec_enet_private *fep)
++{
++	cbd_t *bdp = fep->rx_bd_base;
++	int i;
++
++	DBG(0, "%s: Freeing TX bounce buffers %p\n", __FUNCTION__, fep->tx_bounce[0]);
++	kfree(fep->tx_bounce[0]);
++	memset(fep->tx_bounce, 0, TX_RING_SIZE * sizeof(void*));
++	for (i = 0; i < RX_RING_SIZE; i++, bdp++) {
++		if (fep->rx_skbuff[i] != NULL) {
++			DBG(0, "%s: Freeing RX skb %p\n", __FUNCTION__, fep->rx_skbuff[i]);
++			fec_enet_rxbuf_unmap(fep, bdp, FEC_ENET_RX_FRSIZE);
++			kfree_skb(fep->rx_skbuff[i]);
++			fep->rx_skbuff[i] = NULL;
++		}
++	}
++}
++
++#ifdef CONFIG_PHYLIB
++/* called by the generic PHY layer in interrupt context */
++static int phy_regs[32] = { [0 ... ARRAY_SIZE(phy_regs) - 1] = -1};
++static int fec_mii_read(struct mii_bus *bus, int phy_id, int regnum)
+ {
++	int ret;
++	struct net_device *dev = bus->priv;
+ 	struct fec_enet_private *fep = netdev_priv(dev);
+-	unsigned long	mem_addr;
+-	volatile cbd_t	*bdp;
+-	cbd_t		*cbd_base;
+-	volatile fec_t	*fecp;
+-	int 		i, j;
++	unsigned long regval = mk_mii_read(regnum) | phy_id << 23;
++	unsigned long flags;
++	int loops = 0;
+ 
+-	/* Allocate memory for buffer descriptors.
+-	*/
+-	mem_addr = (unsigned long)dma_alloc_coherent(NULL, PAGE_SIZE,
+-			&fep->bd_dma, GFP_KERNEL);
+-	if (mem_addr == 0) {
+-		printk("FEC: allocate descriptor memory failed?\n");
++	DBG(1, "%s: \n", __FUNCTION__);
++#if 0
++	DBG(0, "%s: ECR:  %08lx\n", __FUNCTION__, fec_reg_read(fep, FEC_ECR));
++	DBG(0, "%s: EIR:  %08lx\n", __FUNCTION__, fec_reg_read(fep, FEC_EIR));
++	DBG(0, "%s: EIMR: %08lx\n", __FUNCTION__, fec_reg_read(fep, FEC_EIMR));
++	DBG(0, "%s: RCR:  %08lx\n", __FUNCTION__, fec_reg_read(fep, FEC_RCR));
++	DBG(0, "%s: TCR:  %08lx\n", __FUNCTION__, fec_reg_read(fep, FEC_TCR));
++#endif
++	spin_lock_irqsave(&fep->lock, flags);
++	fep->mii_complete = 0;
++	fec_reg_write(fep, FEC_MMFR, regval);
++	spin_unlock_irqrestore(&fep->lock, flags);
++
++	while (!fep->mii_complete) {
++		if (loops++ == 1000) {
++			DBG(1, "%s: Waiting for MII completion\n", __FUNCTION__);
++		}
++		cpu_relax();
++	}
++	if (loops >= 1000) {
++		DBG(1, "%s: MII transaction completed\n", __FUNCTION__);
++	}
++	ret = fec_reg_read(fep, FEC_MMFR);
++	if (ret < 0) {
++		DBG(0, "%s: Failed to read PHY[%02x] reg %02x: %d\n", __FUNCTION__,
++		    phy_id, regnum, ret);
++		return ret;
++	}
++	ret &= 0xffff;
++	if (phy_regs[regnum] != ret) {
++		DBG(1, "%s: Read %04x from PHY[%02x] reg %02x\n", __FUNCTION__,
++		    ret, phy_id, regnum);
++		phy_regs[regnum] = ret;
++	}
++	return ret;
++}
++
++static int fec_mii_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
++{
++	struct net_device *dev = bus->priv;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	unsigned long regval = mk_mii_write(regnum, val) | phy_id << 23;
++	unsigned long flags;
++
++	DBG(0, "%s: \n", __FUNCTION__);
++
++	spin_lock_irqsave(&fep->lock, flags);
++	fep->mii_complete = 0;
++	fec_reg_write(fep, FEC_MMFR, regval);
++	spin_unlock_irqrestore(&fep->lock, flags);
++
++	while (!fep->mii_complete) {
++		cpu_relax();
++	}
++	DBG(1, "%s: Wrote %04x to PHY[%02x] reg %02x\n", __FUNCTION__, val, phy_id, regnum);
++	return 0;
++}
++
++static int fec_mii_reset(struct mii_bus *bus)
++{
++	DBG(0, "%s: \n", __FUNCTION__);
++	memset(phy_regs, -1, sizeof(phy_regs));
++	return 0;
++}
++
++static int fec_init_phy(struct net_device *dev, struct fec_enet_private *fep)
++{
++	int ret;
++	int i;
++	struct mii_bus *mii;
++
++	mii = mdiobus_alloc();
++	if (mii == NULL) {
+ 		return -ENOMEM;
+ 	}
++	mii->name = "fec mii";
++	mii->read = fec_mii_read;
++	mii->write = fec_mii_write;
++	mii->reset = fec_mii_reset;
++	mii->priv = dev;
++	snprintf(mii->id, MII_BUS_ID_SIZE, "%x", 0);
++	mii->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
++	for (i = 0; i < PHY_MAX_ADDR; i++) {
++		mii->irq[i] = fep->mii_irq >= 0 ? fep->mii_irq : PHY_POLL;
++	}
++
++	ret = mdiobus_register(mii);
++	if (ret != 0) {
++		DBG(0, "%s: Failed to register MII bus: %d\n", __FUNCTION__, ret);
++		kfree(mii->irq);
++		mdiobus_free(mii);
++		return ret;
++	}
++	fep->phy_addr = -1;
++	DBG(0, "%s: MII bus registered\n", __FUNCTION__);
++	for (i = 0; i < PHY_MAX_ADDR; i++) {
++		if (mii->phy_map[i] != NULL) {
++			fep->phy_addr = i;
++			break;
++		}
++	}
++	if (fep->phy_addr == -1) {
++		DBG(0, "%s: No PHY found\n", __FUNCTION__);
++		return -ENODEV;
++	}
++	DBG(0, "%s: Using PHY at addr %02x\n", __FUNCTION__, fep->phy_addr);
++	fep->mii = mii;
+ 
+-	spin_lock_init(&fep->hw_lock);
+-	spin_lock_init(&fep->mii_lock);
++	return 0;
++}
+ 
+-	/* Create an Ethernet device instance.
+-	*/
+-	fecp = (volatile fec_t *)dev->base_addr;
++static int fec_connect_phy(struct net_device *dev, struct fec_enet_private *fep)
++{
++	struct mii_bus *mii = fep->mii;
+ 
+-	fep->index = index;
+-	fep->hwp = fecp;
+-	fep->netdev = dev;
++	DBG(0, "%s: Connecting PHY at addr %02x\n", __FUNCTION__,
++	    fep->phy_addr);
+ 
+-	/* Whack a reset.  We should wait for this.
+-	*/
+-	fecp->fec_ecntrl = 1;
+-	udelay(10);
++	fep->phy = phy_connect(dev, dev_name(&mii->phy_map[fep->phy_addr]->dev),
++			       fec_link_change, 0, mii->phy_map[fep->phy_addr]->interface);
++	if (IS_ERR(fep->phy)) {
++		int ret = PTR_ERR(fep->phy);
++		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++		fep->phy = NULL;
++		return ret;
++	}
++	DBG(0, "%s: Registered PHY %s[%02x] IRQ %d with %s\n", __FUNCTION__,
++	    dev_name(&fep->phy->dev), fep->phy_addr, fep->phy->irq, dev->name);
+ 
+-	/* Set the Ethernet address */
+-#ifdef CONFIG_M5272
+-	fec_get_mac(dev);
++	return 0;
++}
+ #else
+-	{
+-		unsigned long l;
+-		l = fecp->fec_addr_low;
+-		dev->dev_addr[0] = (unsigned char)((l & 0xFF000000) >> 24);
+-		dev->dev_addr[1] = (unsigned char)((l & 0x00FF0000) >> 16);
+-		dev->dev_addr[2] = (unsigned char)((l & 0x0000FF00) >> 8);
+-		dev->dev_addr[3] = (unsigned char)((l & 0x000000FF) >> 0);
+-		l = fecp->fec_addr_high;
+-		dev->dev_addr[4] = (unsigned char)((l & 0xFF000000) >> 24);
+-		dev->dev_addr[5] = (unsigned char)((l & 0x00FF0000) >> 16);
+-	}
++static int fec_init_phy(struct net_device *dev, struct fec_enet_private *fep)
++{
++	/* Queue up command to detect the PHY and initialize the
++	 * remainder of the interface.
++	 */
++	fep->phy_id_done = 0;
++	fep->phy_addr = 0;
++	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
++
++	return 0;
++}
+ #endif
+ 
+-	cbd_base = (cbd_t *)mem_addr;
++/* Initialize the FEC Ethernet on 860T (or ColdFire 5272).
++ */
++ /*
++  * XXX:  We need to clean up on failure exits here.
++  */
+ 
+-	/* Set receive and transmit descriptor base.
++int __devinit fec_enet_init(struct platform_device *pdev, struct net_device *dev)
++{
++	int ret;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	cbd_t *bdp;
++	struct sk_buff *pskb;
++	int i;
++	void *mem;
++
++	spin_lock_init(&fep->lock);
++
++	/* Whack a reset.  We should wait for this.
+ 	*/
+-	fep->rx_bd_base = cbd_base;
+-	fep->tx_bd_base = cbd_base + RX_RING_SIZE;
++	fec_reg_write(fep, FEC_ECR, FEC_ECR_RESET);
++	udelay(10);
++
++	/* Set the Ethernet address.  If using multiple Enets on the 8xx,
++	 * this needs some work to get unique addresses.
++	 *
++	 * This is our default MAC address unless the user changes
++	 * it via eth_mac_addr (our dev->set_mac_addr handler).
++	 */
++	fec_get_mac(dev);
+ 
+ 	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ 	fep->cur_rx = fep->rx_bd_base;
+ 
+ 	fep->skb_cur = fep->skb_dirty = 0;
+ 
+-	/* Initialize the receive buffer descriptors.
++	/* allocate memory for TX bounce buffers */
++	mem = kzalloc(TX_RING_SIZE * FEC_ENET_TX_FRSIZE, GFP_KERNEL);
++	if (mem == NULL) {
++		return -ENOMEM;
++	}
++
++	fec_enet_cbd_get(fep);
++
++	/* Initialize the transmit buffer descriptors.
+ 	*/
+-	bdp = fep->rx_bd_base;
+-	for (i=0; i<FEC_ENET_RX_PAGES; i++) {
++	bdp = fep->tx_bd_base;
+ 
+-		/* Allocate a page.
+-		*/
+-		mem_addr = __get_free_page(GFP_KERNEL);
+-		/* XXX: missing check for allocation failure */
++	DBG(0, "%s: Allocated %d byte of TX buffer memory @ %p\n", __FUNCTION__,
++	    TX_RING_SIZE * FEC_ENET_TX_FRSIZE, mem);
++	for (i = 0; i < TX_RING_SIZE; i++) {
++		fep->tx_bounce[i] = mem;
++		DBG(0, "%s: TX bounce buffer[%d]=%p\n", __FUNCTION__, i, fep->tx_bounce[i]);
++		mem = (void *)((unsigned long)(mem + FEC_ENET_TX_FRSIZE));
+ 
+ 		/* Initialize the BD for every fragment in the page.
+ 		*/
+-		for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
+-			bdp->cbd_sc = BD_ENET_RX_EMPTY;
+-			bdp->cbd_bufaddr = __pa(mem_addr);
+-			mem_addr += FEC_ENET_RX_FRSIZE;
+-			bdp++;
+-		}
++		bdp->cbd_bufaddr = ~0;
++		bdp++;
+ 	}
+ 
+ 	/* Set the last buffer to wrap.
+@@ -1757,87 +2572,88 @@ int __init fec_enet_init(struct net_devi
+ 	bdp--;
+ 	bdp->cbd_sc |= BD_SC_WRAP;
+ 
+-	/* ...and the same for transmmit.
++	/* ...and the same for receive.
+ 	*/
+-	bdp = fep->tx_bd_base;
+-	for (i=0, j=FEC_ENET_TX_FRPPG; i<TX_RING_SIZE; i++) {
+-		if (j >= FEC_ENET_TX_FRPPG) {
+-			mem_addr = __get_free_page(GFP_KERNEL);
+-			j = 1;
+-		} else {
+-			mem_addr += FEC_ENET_TX_FRSIZE;
+-			j++;
++	bdp = fep->rx_bd_base;
++	for (i = 0; i < RX_RING_SIZE; i++, bdp++) {
++		pskb = __dev_alloc_skb(FEC_ENET_RX_FRSIZE, GFP_KERNEL);
++		if (pskb == NULL) {
++			DBG(0, "%s: Failed to allocate RX skb; cleaning up\n", __FUNCTION__);
++			ret = -ENOMEM;
++			goto cleanup;
+ 		}
+-		fep->tx_bounce[i] = (unsigned char *) mem_addr;
+-
+-		/* Initialize the BD for every fragment in the page.
+-		*/
+-		bdp->cbd_sc = 0;
+-		bdp->cbd_bufaddr = 0;
+-		bdp++;
++		DBG(0, "%s: RX skb allocated @ %p\n", __FUNCTION__, pskb);
++		fep->rx_skbuff[i] = pskb;
++		pskb->data = FEC_ADDR_ALIGNMENT(pskb->data);
++		bdp->cbd_sc = BD_ENET_RX_EMPTY;
++		bdp->cbd_bufaddr = ~0;
++		fec_enet_rxbuf_map(fep, bdp, pskb->data, FEC_ENET_RX_FRSIZE);
+ 	}
+-
+ 	/* Set the last buffer to wrap.
+ 	*/
+ 	bdp--;
+ 	bdp->cbd_sc |= BD_SC_WRAP;
++	fec_enet_cbd_put(fep);
+ 
+ 	/* Set receive and transmit descriptor base.
+ 	*/
+-	fecp->fec_r_des_start = fep->bd_dma;
+-	fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
+-				* RX_RING_SIZE;
+-
+-#ifdef HAVE_mii_link_interrupt
+-	fec_request_mii_intr(dev);
+-#endif
+-
+-	fecp->fec_grp_hash_table_high = 0;
+-	fecp->fec_grp_hash_table_low = 0;
+-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
+-	fecp->fec_ecntrl = 2;
+-	fecp->fec_r_des_active = 0;
+-#ifndef CONFIG_M5272
+-	fecp->fec_hash_table_high = 0;
+-	fecp->fec_hash_table_low = 0;
+-#endif
++	fec_reg_write(fep, FEC_ERDSR, fep->cbd_phys_base);
++	fec_reg_write(fep, FEC_ETDSR, fep->cbd_phys_base + RX_RING_SIZE * sizeof(cbd_t));
+ 
++	/* Install our interrupt handlers. This varies depending on
++	 * the architecture.
++	*/
++	ret = fec_request_intrs(pdev, dev);
++	if (ret != 0) {
++		goto cleanup;
++	}
++	/* Clear and enable interrupts */
++	fec_reg_write(fep, FEC_EIR, fec_reg_read(fep, FEC_EIR));
++	fec_reg_write(fep, FEC_EIMR, FEC_ENET_TXF | FEC_ENET_TXB |
++		      FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
++
++	fec_reg_write(fep, FEC_IAUR, 0);
++	fec_reg_write(fep, FEC_IALR, 0);
++	fec_reg_write(fep, FEC_EMRBR, PKT_MAXBLR_SIZE);
++	fec_reg_write(fep, FEC_ECR, FEC_ECR_ETHER_EN);
++	fec_localhw_setup(dev);
++#if 0
++	/* do this in enet_open()! */
++	fec_reg_write(fep, FEC_RDAR, DONT_CARE);
++#endif
+ 	/* The FEC Ethernet specific entries in the device structure. */
+ 	dev->open = fec_enet_open;
+ 	dev->hard_start_xmit = fec_enet_start_xmit;
+ 	dev->tx_timeout = fec_timeout;
+ 	dev->watchdog_timeo = TX_TIMEOUT;
+ 	dev->stop = fec_enet_close;
++	dev->get_stats = fec_enet_get_stats;
+ 	dev->set_multicast_list = set_multicast_list;
++	dev->set_mac_address = fec_set_mac_address;
+ 
+-	for (i=0; i<NMII-1; i++)
+-		mii_cmds[i].mii_next = &mii_cmds[i+1];
++#ifndef CONFIG_PHYLIB
++	for (i = 1; i < NMII; i++) {
++		mii_cmds[i - 1].mii_next = &mii_cmds[i];
++	}
+ 	mii_free = mii_cmds;
+-
++#endif
+ 	/* setup MII interface */
+-	fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
+-	fecp->fec_x_cntrl = 0x00;
+-
+-	/*
+-	 * Set MII speed to 2.5 MHz
+-	 */
+-	fep->phy_speed = ((((clk_get_rate(fep->clk) / 2 + 4999999)
+-					/ 2500000) / 2) & 0x3F) << 1;
+-	fecp->fec_mii_speed = fep->phy_speed;
+-	fec_restart(dev, 0);
+-
+-	/* Clear and enable interrupts */
+-	fecp->fec_ievent = 0xffc00000;
+-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
+-
+-	/* Queue up command to detect the PHY and initialize the
+-	 * remainder of the interface.
+-	 */
+-	fep->phy_id_done = 0;
+-	fep->phy_addr = 0;
+-	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
++	ret = fec_set_mii(dev, fep);
++	if (ret) {
++		DBG(0, "%s: Failed to initialize MII interface: %d\n", __FUNCTION__, ret);
++		goto cleanup;
++	}
+ 
++	ret = fec_init_phy(dev, fep);
++	if (ret) {
++		DBG(0, "%s: Failed to initialize PHY: %d\n", __FUNCTION__, ret);
++		goto cleanup;
++	}
+ 	return 0;
++ cleanup:
++	fec_enet_free_buffers(fep);
++	fec_enet_cbd_put(fep);
++	return ret;
+ }
+ 
+ /* This function is called to start or restart the FEC during a link
+@@ -1847,60 +2663,67 @@ int __init fec_enet_init(struct net_devi
+ static void
+ fec_restart(struct net_device *dev, int duplex)
+ {
+-	struct fec_enet_private *fep;
+-	volatile cbd_t *bdp;
+-	volatile fec_t *fecp;
++	struct fec_enet_private *fep = netdev_priv(dev);
++	cbd_t *bdp;
+ 	int i;
++	u32 rcr = OPT_FRAME_SIZE | RCR_MII_MODE;	/* MII enable */
++	u32 tcr = TCR_HBC;
+ 
+-	fep = netdev_priv(dev);
+-	fecp = fep->hwp;
+-
++	DBG(0, "%s: Restarting FEC in %s-duplex mode\n", __FUNCTION__,
++	    duplex ? "full" : "half");
+ 	/* Whack a reset.  We should wait for this.
+-	*/
+-	fecp->fec_ecntrl = 1;
++	 */
++	fec_reg_write(fep, FEC_ECR, FEC_ECR_RESET);
+ 	udelay(10);
+ 
++	/* Enable interrupts we wish to service.
++	 */
++	fec_reg_write(fep, FEC_EIMR, FEC_ENET_TXF | FEC_ENET_TXB |
++		      FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII);
++
+ 	/* Clear any outstanding interrupt.
+-	*/
+-	fecp->fec_ievent = 0xffc00000;
++	 *
++	 */
++	fec_reg_write(fep, FEC_EIR, FEC_ENET_MASK);
++
++	fec_enable_phy_intr(fep);
+ 
+ 	/* Set station address.
+-	*/
+-	fec_set_mac_address(dev);
++	 */
++	_fec_set_mac_address(dev);
+ 
+ 	/* Reset all multicast.
+-	*/
+-	fecp->fec_grp_hash_table_high = 0;
+-	fecp->fec_grp_hash_table_low = 0;
++	 */
++	fec_reg_write(fep, FEC_IAUR, 0);
++	fec_reg_write(fep, FEC_IALR, 0);
+ 
+ 	/* Set maximum receive buffer size.
+-	*/
+-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
++	 */
++	fec_reg_write(fep, FEC_EMRBR, PKT_MAXBLR_SIZE);
+ 
+ 	/* Set receive and transmit descriptor base.
+-	*/
+-	fecp->fec_r_des_start = fep->bd_dma;
+-	fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t)
+-				* RX_RING_SIZE;
++	 */
++	fec_reg_write(fep, FEC_ERDSR, fep->cbd_phys_base);
++	fec_reg_write(fep, FEC_ETDSR, fep->cbd_phys_base + RX_RING_SIZE * sizeof(cbd_t));
+ 
+ 	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
+ 	fep->cur_rx = fep->rx_bd_base;
+ 
+ 	/* Reset SKB transmit buffers.
+-	*/
++	 */
+ 	fep->skb_cur = fep->skb_dirty = 0;
+-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
++	bdp = fep->tx_bd_base;
++	for (i = 0; i <= TX_RING_MOD_MASK; i++) {
+ 		if (fep->tx_skbuff[i] != NULL) {
+-			dev_kfree_skb_any(fep->tx_skbuff[i]);
+-			fep->tx_skbuff[i] = NULL;
++			fec_free_skb(fep, bdp, &fep->tx_skbuff[i]);
++			bdp++;
+ 		}
+ 	}
+ 
+ 	/* Initialize the receive buffer descriptors.
+-	*/
++	 */
+ 	bdp = fep->rx_bd_base;
+-	for (i=0; i<RX_RING_SIZE; i++) {
+-
++	for (i = 0; i < RX_RING_SIZE; i++) {
+ 		/* Initialize the BD for every fragment in the page.
+ 		*/
+ 		bdp->cbd_sc = BD_ENET_RX_EMPTY;
+@@ -1908,246 +2731,366 @@ fec_restart(struct net_device *dev, int 
+ 	}
+ 
+ 	/* Set the last buffer to wrap.
+-	*/
++	 */
+ 	bdp--;
+ 	bdp->cbd_sc |= BD_SC_WRAP;
+ 
+ 	/* ...and the same for transmmit.
+-	*/
++	 */
+ 	bdp = fep->tx_bd_base;
+-	for (i=0; i<TX_RING_SIZE; i++) {
+-
++	for (i = 0; i < TX_RING_SIZE; i++) {
+ 		/* Initialize the BD for every fragment in the page.
+ 		*/
+ 		bdp->cbd_sc = 0;
+-		bdp->cbd_bufaddr = 0;
++		bdp->cbd_bufaddr = ~0;
+ 		bdp++;
+ 	}
+ 
+ 	/* Set the last buffer to wrap.
+-	*/
++	 */
+ 	bdp--;
+ 	bdp->cbd_sc |= BD_SC_WRAP;
+ 
+ 	/* Enable MII mode.
+-	*/
++	 */
+ 	if (duplex) {
+-		fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */
+-		fecp->fec_x_cntrl = 0x04;		  /* FD enable */
++		tcr |= TCR_FDEN;	/* FD enable */
+ 	} else {
+-		/* MII enable|No Rcv on Xmit */
+-		fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06;
+-		fecp->fec_x_cntrl = 0x00;
++		rcr |= RCR_DRT;		/* No Rcv on Xmit */
+ 	}
++	fec_reg_write(fep, FEC_RCR, rcr);
++	fec_reg_write(fep, FEC_TCR, tcr);
+ 	fep->full_duplex = duplex;
+ 
+ 	/* Set MII speed.
+-	*/
+-	fecp->fec_mii_speed = fep->phy_speed;
++	 */
++	fec_reg_write(fep, FEC_MSCR, fep->phy_speed);
+ 
+ 	/* And last, enable the transmit and receive processing.
+-	*/
+-	fecp->fec_ecntrl = 2;
+-	fecp->fec_r_des_active = 0;
++	 */
++	fec_reg_write(fep, FEC_ECR, FEC_ECR_ETHER_EN);
++	fec_localhw_setup(dev);
++	fec_reg_write(fep, FEC_RDAR, DONT_CARE);
+ 
+-	/* Enable interrupts we wish to service.
+-	*/
+-	fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_RXF | FEC_ENET_MII);
++	DBG(0, "%s: Starting netif queue\n", __FUNCTION__);
++	netif_start_queue(dev);
+ }
+ 
+ static void
+ fec_stop(struct net_device *dev)
+ {
+-	volatile fec_t *fecp;
+-	struct fec_enet_private *fep;
++	struct fec_enet_private *fep = netdev_priv(dev);
+ 
+-	fep = netdev_priv(dev);
+-	fecp = fep->hwp;
++	DBG(0, "%s: Stopping netif queue\n", __FUNCTION__);
++	netif_stop_queue(dev);
+ 
+ 	/*
+-	** We cannot expect a graceful transmit stop without link !!!
+-	*/
+-	if (fep->link)
+-		{
+-		fecp->fec_x_cntrl = 0x01;	/* Graceful transmit stop */
++	 * We cannot expect a graceful transmit stop without link!
++	 */
++	if (fep->linkstatus) {
++		fec_reg_write(fep, FEC_TCR, 0x01);	/* Graceful transmit stop */
+ 		udelay(10);
+-		if (!(fecp->fec_ievent & FEC_ENET_GRA))
+-			printk("fec_stop : Graceful transmit stop did not complete !\n");
+-		}
+-
++		if (!(fec_reg_read(fep, FEC_EIR) & FEC_ENET_GRA))
++			dev_warn(&dev->dev, "Graceful transmit stop did not complete!\n");
++	}
++#if 0
+ 	/* Whack a reset.  We should wait for this.
+-	*/
+-	fecp->fec_ecntrl = 1;
++	 */
++	fec_reg_write(fep, FEC_ECR, FEC_ECR_RESET);
+ 	udelay(10);
+-
+-	/* Clear outstanding MII command interrupts.
+-	*/
+-	fecp->fec_ievent = FEC_ENET_MII;
+-
+-	fecp->fec_imask = FEC_ENET_MII;
+-	fecp->fec_mii_speed = fep->phy_speed;
++	/* Mask and clear outstanding MII command interrupts.
++	 */
++	fec_reg_write(fep, FEC_EIMR, 0);
++	fec_reg_write(fep, FEC_EIR, FEC_ENET_MII);
++	fec_enable_phy_intr(fep);
++	fec_reg_write(fep, FEC_MSCR, fep->phy_speed);
++#endif
+ }
+ 
+-static int __devinit
+-fec_probe(struct platform_device *pdev)
++static int __devinit fec_enet_probe(struct platform_device *pdev)
+ {
++	int ret;
+ 	struct fec_enet_private *fep;
+-	struct net_device *ndev;
+-	int i, irq, ret = 0;
+-	struct resource *r;
+-
+-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+-	if (!r)
+-		return -ENXIO;
++	struct net_device *dev;
++	struct fec_enet_platform_data *pdata = pdev->dev.platform_data;
++	struct resource *res_mem1;
++	struct resource *res_mem2;
++
++	res_mem1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (res_mem1 == NULL) {
++		return -ENODEV;
++	}
+ 
+-	r = request_mem_region(r->start, resource_size(r), pdev->name);
+-	if (!r)
++	res_mem1 = request_mem_region(res_mem1->start,
++				      resource_size(res_mem1),
++				      DRV_NAME);
++	if (res_mem1 == NULL) {
+ 		return -EBUSY;
++	}
++	res_mem2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
++	if (res_mem2 != NULL) {
++		res_mem2 = request_mem_region(res_mem2->start,
++					      resource_size(res_mem2),
++					      DRV_NAME);
++		if (res_mem2 == NULL) {
++			ret = -EBUSY;
++			goto release1;
++		}
++	}
+ 
+-	/* Init network device */
+-	ndev = alloc_etherdev(sizeof(struct fec_enet_private));
+-	if (!ndev)
+-		return -ENOMEM;
+-
+-	SET_NETDEV_DEV(ndev, &pdev->dev);
+-
+-	/* setup board info structure */
+-	fep = netdev_priv(ndev);
+-	memset(fep, 0, sizeof(*fep));
++	dev = alloc_etherdev(sizeof(struct fec_enet_private));
++	if (dev == NULL) {
++		ret = -ENOMEM;
++		goto release2;
++	}
++	platform_set_drvdata(pdev, dev);
++	fep = netdev_priv(dev);
++	fep->res_mem1 = res_mem1;
++	fep->res_mem2 = res_mem2;
++	fep->dma_dev = &pdev->dev;
++
++	fep->reg_base = ioremap(res_mem1->start, resource_size(res_mem1));
++	if (fep->reg_base == NULL) {
++		printk("FEC: Mapping FEC registers failed\n");
++		ret = -ENOMEM;
++		goto free_netdev;
++	}
++	DBG(0, "%s: FEC registers @ %08lx mapped to %p\n", __FUNCTION__,
++	    (unsigned long)res_mem1->start, fep->reg_base);
+ 
+-	ndev->base_addr = (unsigned long)ioremap(r->start, resource_size(r));
++	fep->mib_base = ioremap(res_mem2->start, resource_size(res_mem2));
++	if (fep->mib_base == NULL) {
++		printk("FEC: Mapping FEC registers failed\n");
++		ret = -ENOMEM;
++		goto unmap1;
++	}
++	DBG(0, "%s: FEC registers @ %08lx mapped to %p\n", __FUNCTION__,
++	    (unsigned long)res_mem2->start, fep->mib_base);
+ 
+-	if (!ndev->base_addr) {
++	/* Allocate memory for buffer descriptors. */
++	fep->cbd_mem_base = dma_alloc_coherent(&pdev->dev, CBD_BUF_SIZE,
++					       &fep->cbd_phys_base,
++					       GFP_KERNEL);
++	if (fep->cbd_mem_base == NULL) {
++		printk("FEC: allocate descriptor memory failed\n");
+ 		ret = -ENOMEM;
+-		goto failed_ioremap;
++		goto unmap2;
+ 	}
++	DBG(0, "%s: Allocated %lu [(%u + %lu) * %d] byte for CBD buffer @ %p[%08lx]\n",
++	    __FUNCTION__, CBD_BUF_SIZE, TX_RING_SIZE, RX_RING_SIZE,
++	    sizeof(cbd_t), fep->cbd_mem_base,
++	    (unsigned long)fep->cbd_phys_base);
+ 
+-	platform_set_drvdata(pdev, ndev);
++	/* Set receive and transmit descriptor base.
++	*/
++	fep->rx_bd_base = fep->cbd_mem_base;
++	fep->tx_bd_base = fep->rx_bd_base + RX_RING_SIZE;
+ 
+-	/* This device has up to three irqs on some platforms */
+-	for (i = 0; i < 3; i++) {
+-		irq = platform_get_irq(pdev, i);
+-		if (i && irq < 0)
+-			break;
+-		ret = request_irq(irq, fec_enet_interrupt, IRQF_DISABLED, pdev->name, ndev);
+-		if (ret) {
+-			while (i >= 0) {
+-				irq = platform_get_irq(pdev, i);
+-				free_irq(irq, ndev);
+-				i--;
+-			}
+-			goto failed_irq;
+-		}
++	printk("FEC ENET Driver\n");
++	ret = platform_func(pdata->arch_init, pdev);
++	if (ret != 0) {
++		dev_err(&pdev->dev, "platform init failed: %d\n", ret);
++		goto free_dma;
+ 	}
+ 
+-	fep->clk = clk_get(&pdev->dev, "fec_clk");
+-	if (IS_ERR(fep->clk)) {
+-		ret = PTR_ERR(fep->clk);
+-		goto failed_clk;
++	ret = fec_enet_init(pdev, dev);
++	if (ret != 0) {
++		goto fec_disable;
+ 	}
+-	clk_enable(fep->clk);
+ 
+-	ret = fec_enet_init(ndev, 0);
+-	if (ret)
+-		goto failed_init;
++	/* Enable most messages by default */
++	fep->msg_enable = (NETIF_MSG_IFUP << 1) - 1;
++	ret = register_netdev(dev);
++	if (ret != 0) {
++		/* XXX: missing cleanup here */
++		goto free_buffers;
++	}
+ 
+-	ret = register_netdev(ndev);
+-	if (ret)
+-		goto failed_register;
++	printk(KERN_INFO "%s: ethernet %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
++	       dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
++	       dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ 
+ 	return 0;
+ 
+-failed_register:
+-failed_init:
+-	clk_disable(fep->clk);
+-	clk_put(fep->clk);
+-failed_clk:
+-	for (i = 0; i < 3; i++) {
+-		irq = platform_get_irq(pdev, i);
+-		if (irq > 0)
+-			free_irq(irq, ndev);
+-	}
+-failed_irq:
+-	iounmap((void __iomem *)ndev->base_addr);
+-failed_ioremap:
+-	free_netdev(ndev);
++ free_buffers:
++	fec_enet_free_buffers(fep);
++
++ fec_disable:
++	platform_func(pdata->arch_exit, pdev);
++
++ free_dma:
++	dma_free_coherent(&pdev->dev, CBD_BUF_SIZE, fep->cbd_mem_base, fep->cbd_phys_base);
++
++ unmap2:
++	if (fep->mib_base)
++		iounmap(fep->mib_base);
++
++ unmap1:
++	iounmap(fep->reg_base);
++
++ free_netdev:
++	free_netdev(dev);
++
++ release2:
++	if (res_mem2 != NULL) {
++		release_resource(res_mem2);
++	}
++
++ release1:
++	release_resource(res_mem1);
+ 
+ 	return ret;
+ }
+ 
+-static int __devexit
+-fec_drv_remove(struct platform_device *pdev)
++static int __devexit fec_enet_remove(struct platform_device *pdev)
+ {
+-	struct net_device *ndev = platform_get_drvdata(pdev);
+-	struct fec_enet_private *fep = netdev_priv(ndev);
++	struct net_device *dev = platform_get_drvdata(pdev);
++	struct fec_enet_private *fep = netdev_priv(dev);
++
++	unregister_netdev(dev);
++	free_netdev(dev);
++
++#ifdef CONFIG_PHYLIB
++	if (fep->mii != NULL) {
++		kfree(fep->mii->irq);
++		mdiobus_unregister(fep->mii);
++	}
++	mdiobus_free(fep->mii);
++#endif
++	fec_release_intrs(dev);
++
++	DBG(0, "%s: Unmapping FEC registers %p\n", __FUNCTION__, fep->reg_base);
++	iounmap(fep->reg_base);
++	if (fep->mib_base)
++		iounmap(fep->mib_base);
++
++	fec_enet_free_buffers(fep);
+ 
+-	platform_set_drvdata(pdev, NULL);
++	DBG(0, "%s: Freeing CBD buffer area %p[%08lx]\n", __FUNCTION__,
++	    fep->cbd_mem_base, (unsigned long)fep->cbd_phys_base);
++	dma_free_coherent(&pdev->dev, CBD_BUF_SIZE, fep->cbd_mem_base, fep->cbd_phys_base);
+ 
+-	fec_stop(ndev);
+-	clk_disable(fep->clk);
+-	clk_put(fep->clk);
+-	iounmap((void __iomem *)ndev->base_addr);
+-	unregister_netdev(ndev);
+-	free_netdev(ndev);
++	release_resource(fep->res_mem1);
++	if (fep->res_mem2 != NULL) {
++		release_resource(fep->res_mem2);
++	}
+ 	return 0;
+ }
+ 
+-static int
+-fec_suspend(struct platform_device *dev, pm_message_t state)
++static void fec_enet_shutdown(struct platform_device *pdev)
+ {
+-	struct net_device *ndev = platform_get_drvdata(dev);
+-	struct fec_enet_private *fep;
++	struct fec_enet_platform_data *pdata = pdev->dev.platform_data;
++
++	DBG(0, "%s: Shutting down FEC Hardware\n", __FUNCTION__);
++	platform_func(pdata->arch_exit, pdev);
++}
++
++#ifdef CONFIG_PM
++static int fec_enet_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	int ret;
++	struct fec_enet_platform_data *pdata = pdev->dev.platform_data;
++	struct net_device *ndev = platform_get_drvdata(pdev);
++	struct fec_enet_private *fep = netdev_priv(ndev);
+ 
+-	if (ndev) {
+-		fep = netdev_priv(ndev);
+-		if (netif_running(ndev)) {
+-			netif_device_detach(ndev);
+-			fec_stop(ndev);
++	if (netif_running(ndev)) {
++		DBG(0, "%s: Detaching netif\n", __FUNCTION__);
++		netif_device_detach(ndev);
++#ifdef CONFIG_PHYLIB
++		DBG(0, "%s: Disconnecting PHY %p\n", __FUNCTION__, fep->phy);
++		phy_disconnect(fep->phy);
++		fep->phy = NULL;
++#endif
++	}
++#ifndef CONFIG_PHYLIB
++	if (fep->phy_timer) {
++		ret = del_timer_sync(fep->phy_timer);
++		if (ret != 0) {
++			DBG(0, "%s: Failed to delete PHY timer: %d\n", __FUNCTION__, ret);
++			return ret;
+ 		}
+ 	}
+-	return 0;
++#endif
++	DBG(0, "%s: Shutting down FEC Hardware %d\n", __FUNCTION__,
++	    netif_running(ndev));
++	ret = platform_func(pdata->suspend, pdev);
++	if (ret != 0 && netif_running(ndev)) {
++		DBG(0, "%s: Failed to suspend: %d\n", __FUNCTION__, ret);
++		/* Undo suspend */
++#ifdef CONFIG_PHYLIB
++		DBG(0, "%s: Reconnecting PHY\n", __FUNCTION__);
++		if (fec_connect_phy(ndev, fep) != 0) {
++			DBG(0, "%s: Failed to connect to PHY\n", __FUNCTION__);
++			return ret;
++		}
++		phy_start(fep->phy);
++#endif
++		fec_link_change(ndev);
++		netif_device_attach(ndev);
++	}
++	return ret;
+ }
+ 
+-static int
+-fec_resume(struct platform_device *dev)
++static int fec_enet_resume(struct platform_device *pdev)
+ {
+-	struct net_device *ndev = platform_get_drvdata(dev);
++	int ret;
++	struct fec_enet_platform_data *pdata = pdev->dev.platform_data;
++	struct net_device *ndev = platform_get_drvdata(pdev);
+ 
+-	if (ndev) {
+-		if (netif_running(ndev)) {
+-			fec_enet_init(ndev, 0);
+-			netif_device_attach(ndev);
++	DBG(0, "%s: Powering up FEC Hardware %d\n", __FUNCTION__,
++	    netif_running(ndev));
++	ret = platform_func(pdata->resume, pdev);
++	if (ret != 0) {
++		DBG(0, "%s: Failed to resume: %d\n", __FUNCTION__, ret);
++		return ret;
++	}
++	if (netif_running(ndev)) {
++#ifdef CONFIG_PHYLIB
++		struct fec_enet_private *fep = netdev_priv(ndev);
++
++		DBG(0, "%s: Reconnecting PHY\n", __FUNCTION__);
++		ret = fec_connect_phy(ndev, fep);
++		if (ret != 0) {
++			DBG(0, "%s: Failed to connect to PHY: %d\n", __FUNCTION__, ret);
++			return ret;
+ 		}
++		phy_start(fep->phy);
++#endif
++		fec_link_change(ndev);
++		netif_device_attach(ndev);
+ 	}
+ 	return 0;
+ }
++#else
++#define fec_enet_suspend	NULL
++#define fec_enet_resume		NULL
++#endif
+ 
+-static struct platform_driver fec_driver = {
+-	.driver	= {
+-		.name    = "fec",
+-		.owner	 = THIS_MODULE,
++static struct platform_driver fec_enet_driver = {
++	.driver = {
++		.name = DRV_NAME,
+ 	},
+-	.probe   = fec_probe,
+-	.remove  = __devexit_p(fec_drv_remove),
+-	.suspend = fec_suspend,
+-	.resume  = fec_resume,
++	.probe = fec_enet_probe,
++	.remove = __devexit_p(fec_enet_remove),
++	.shutdown = fec_enet_shutdown,
++	.suspend = fec_enet_suspend,
++	.resume = fec_enet_resume,
+ };
+ 
+-static int __init
+-fec_enet_module_init(void)
++static int __init fec_enet_module_init(void)
+ {
+-	printk(KERN_INFO "FEC Ethernet Driver\n");
++	int ret;
++
++	ret = platform_driver_register(&fec_enet_driver);
+ 
+-	return platform_driver_register(&fec_driver);
++	return ret;
+ }
++module_init(fec_enet_module_init);
+ 
+-static void __exit
+-fec_enet_cleanup(void)
++static void __exit fec_enet_module_cleanup(void)
+ {
+-	platform_driver_unregister(&fec_driver);
++	platform_driver_unregister(&fec_enet_driver);
+ }
+-
+-module_exit(fec_enet_cleanup);
+-module_init(fec_enet_module_init);
++module_exit(fec_enet_module_cleanup);
+ 
+ MODULE_LICENSE("GPL");
+diff -urNp linux-2.6.30-rc4/drivers/net/fec.h linux-2.6.30-rc4-karo/drivers/net/fec.h
+--- linux-2.6.30-rc4/drivers/net/fec.h	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/net/fec.h	2009-06-02 17:05:27.000000000 +0200
+@@ -13,6 +13,15 @@
+ #define	FEC_H
+ /****************************************************************************/
+ 
++/*
++ * dummy value to write into RDAR,TDAR. FEC hardware will scan the TX/RX
++ * descriptors in memory upon any write access to those registers.
++ * The actual value written to those registers does not matter.
++*/
++#define DONT_CARE		0
++#define RDAR_BUSY		(1 << 24)
++#define TDAR_BUSY		(1 << 24)
++
+ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+     defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARCH_MXC)
+ /*
+@@ -20,6 +29,36 @@
+  *	registers in the same peripheral device on different models
+  *	of the ColdFire!
+  */
++// relying on structure alignment for hardware register is just evil
++#ifndef GARBAGE
++#define FEC_EIR			0x004
++#define FEC_EIMR		0x008
++#define	FEC_RDAR		0x010
++#define	FEC_TDAR		0x014
++#define	FEC_ECR			0x024
++#define	FEC_MMFR		0x040
++#define	FEC_MSCR		0x044
++#define	FEC_MIBC		0x064
++#define	FEC_RCR			0x084
++#define	FEC_TCR			0x0c4
++#define	FEC_PALR		0x0e4
++#define	FEC_PAUR		0x0e8
++#define	FEC_OPD			0x0ec
++#define	FEC_IAUR		0x118
++#define	FEC_IALR		0x11c
++#define	FEC_GAUR		0x120
++#define	FEC_GALR		0x124
++#define	FEC_TFWR		0x144
++#define	FEC_FRBR		0x14c
++#define	FEC_FRSR		0x150
++#define	FEC_ERDSR		0x180
++#define	FEC_ETDSR		0x184
++#define	FEC_EMRBR		0x188
++
++#define FEC_ECR_RESET		(1 << 0)
++#define FEC_ECR_ETHER_EN	(1 << 1)
++#else
++
+ typedef struct fec {
+ 	unsigned long	fec_reserved0;
+ 	unsigned long	fec_ievent;		/* Interrupt event reg */
+@@ -57,6 +96,7 @@ typedef struct fec {
+ 	unsigned long	fec_x_des_start;	/* Transmit descriptor ring */
+ 	unsigned long	fec_r_buff_size;	/* Maximum receive buff size */
+ } fec_t;
++#endif
+ 
+ #else
+ 
+@@ -88,8 +128,8 @@ typedef struct fec {
+ 	unsigned long	fec_reserved7[158];
+ 	unsigned long	fec_addr_low;		/* Low 32bits MAC address */
+ 	unsigned long	fec_addr_high;		/* High 16bits MAC address */
+-	unsigned long	fec_grp_hash_table_high;/* High 32bits hash table */
+-	unsigned long	fec_grp_hash_table_low;	/* Low 32bits hash table */
++	unsigned long	fec_hash_table_high;	/* High 32bits hash table */
++	unsigned long	fec_hash_table_low;	/* Low 32bits hash table */
+ 	unsigned long	fec_r_des_start;	/* Receive descriptor ring */
+ 	unsigned long	fec_x_des_start;	/* Transmit descriptor ring */
+ 	unsigned long	fec_r_buff_size;	/* Maximum receive buff size */
+@@ -103,17 +143,20 @@ typedef struct fec {
+ /*
+  *	Define the buffer descriptor structure.
+  */
+-#ifdef CONFIG_ARCH_MXC
++/* Please see "Receive Buffer Descriptor Field Definitions" in Specification.
++ * It's LE.
++ */
++#if defined(CONFIG_ARCH_MXC)
+ typedef struct bufdesc {
+-	unsigned short cbd_datlen;	/* Data length */
+-	unsigned short cbd_sc;	/* Control and status info */
+-	unsigned long cbd_bufaddr;	/* Buffer address */
++	unsigned short	cbd_datlen;             /* Data length */
++	unsigned short	cbd_sc;                 /* Control and status info */
++	dma_addr_t	cbd_bufaddr;            /* Buffer address as seen by FEC Hardware */
+ } cbd_t;
+ #else
+ typedef struct bufdesc {
+ 	unsigned short	cbd_sc;			/* Control and status info */
+ 	unsigned short	cbd_datlen;		/* Data length */
+-	unsigned long	cbd_bufaddr;		/* Buffer address */
++	dma_addr_t	cbd_bufaddr;		/* Buffer address */
+ } cbd_t;
+ #endif
+ 
+@@ -121,7 +164,7 @@ typedef struct bufdesc {
+  *	The following definitions courtesy of commproc.h, which where
+  *	Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
+  */
+-#define BD_SC_EMPTY     ((ushort)0x8000)        /* Recieve is empty */
++#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
+ #define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
+ #define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
+ #define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
+@@ -168,5 +211,22 @@ typedef struct bufdesc {
+ #define BD_ENET_TX_STATS        ((ushort)0x03ff)        /* All status bits */
+ 
+ 
++#define RCR_LOOP		(1 << 0)
++#define RCR_DRT			(1 << 1)
++#define RCR_MII_MODE		(1 << 2)
++#define RCR_PROM		(1 << 3)
++#define RCR_BC_REJ		(1 << 4)
++#define RCR_FCE			(1 << 5)
++#define RCR_MAX_FL_SHIFT	16
++#define RCR_MAX_FL_MASK		(0x7ff << (RCR_MAX_FL_SHIFT))
++#define RCR_MAX_FL_set(n)	(((n) << (RCR_MAX_FL_SHIFT)) & (RCR_MAX_FL_MASK))
++#define RCR_MAX_FL_get(n)	(((n) & (RCR_MAX_FL_MASK)) >> (RCR_MAX_FL_SHIFT))
++
++#define TCR_GTS			(1 << 0)
++#define TCR_HBC			(1 << 1)
++#define TCR_FDEN		(1 << 2)
++#define TCR_TFCPAUSE		(1 << 3)
++#define TCR_RFCPAUSE		(1 << 4)
++
+ /****************************************************************************/
+ #endif /* FEC_H */
+diff -urNp linux-2.6.30-rc4/drivers/video/imxfb.c linux-2.6.30-rc4-karo/drivers/video/imxfb.c
+--- linux-2.6.30-rc4/drivers/video/imxfb.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/drivers/video/imxfb.c	2009-06-02 17:05:26.000000000 +0200
+@@ -570,7 +570,7 @@ static int imxfb_resume(struct platform_
+ #define imxfb_resume	NULL
+ #endif
+ 
+-static int __init imxfb_init_fbinfo(struct platform_device *pdev)
++static int __devinit imxfb_init_fbinfo(struct platform_device *pdev)
+ {
+ 	struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
+ 	struct fb_info *info = dev_get_drvdata(&pdev->dev);
+@@ -636,7 +636,7 @@ static int __init imxfb_init_fbinfo(stru
+ 	return 0;
+ }
+ 
+-static int __init imxfb_probe(struct platform_device *pdev)
++static int __devinit imxfb_probe(struct platform_device *pdev)
+ {
+ 	struct imxfb_info *fbi;
+ 	struct fb_info *info;
+@@ -754,7 +754,7 @@ failed_map:
+ failed_getclock:
+ 	iounmap(fbi->regs);
+ failed_ioremap:
+-	release_mem_region(res->start, res->end - res->start);
++	release_mem_region(res->start, resource_size(res));
+ failed_req:
+ 	kfree(info->pseudo_palette);
+ failed_init:
+@@ -763,7 +763,7 @@ failed_init:
+ 	return ret;
+ }
+ 
+-static int __devexit imxfb_remove(struct platform_device *pdev)
++static int imxfb_remove(struct platform_device *pdev)
+ {
+ 	struct imx_fb_platform_data *pdata;
+ 	struct fb_info *info = platform_get_drvdata(pdev);
+@@ -785,7 +785,7 @@ static int __devexit imxfb_remove(struct
+ 	framebuffer_release(info);
+ 
+ 	iounmap(fbi->regs);
+-	release_mem_region(res->start, res->end - res->start + 1);
++	release_mem_region(res->start, resource_size(res));
+ 	clk_disable(fbi->clk);
+ 	clk_put(fbi->clk);
+ 
+@@ -794,7 +794,7 @@ static int __devexit imxfb_remove(struct
+ 	return 0;
+ }
+ 
+-void  imxfb_shutdown(struct platform_device * dev)
++void imxfb_shutdown(struct platform_device *dev)
+ {
+ 	struct fb_info *info = platform_get_drvdata(dev);
+ 	struct imxfb_info *fbi = info->par;
+@@ -804,7 +804,8 @@ void  imxfb_shutdown(struct platform_dev
+ static struct platform_driver imxfb_driver = {
+ 	.suspend	= imxfb_suspend,
+ 	.resume		= imxfb_resume,
+-	.remove		= __devexit_p(imxfb_remove),
++//	.remove		= __devexit_p(imxfb_remove),
++	.remove		= imxfb_remove,
+ 	.shutdown	= imxfb_shutdown,
+ 	.driver		= {
+ 		.name	= DRIVER_NAME,
+diff -urNp linux-2.6.30-rc4/include/linux/fec_enet.h linux-2.6.30-rc4-karo/include/linux/fec_enet.h
+--- linux-2.6.30-rc4/include/linux/fec_enet.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.30-rc4-karo/include/linux/fec_enet.h	2009-06-02 17:05:27.000000000 +0200
+@@ -0,0 +1,26 @@
++/*
++ * Copyright (C) 2007  Lothar Wassmann <LW@KARO-electronics.de>
++ *
++ * platform_data definitions for fec_enet device
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the:
++ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301
++ */
++
++struct fec_enet_platform_data {
++	/* callback for platform specific initialization */
++	int (*arch_init)(struct platform_device *dev);
++	void (*arch_exit)(struct platform_device *dev);
++	int (*suspend)(struct platform_device *dev);
++	int (*resume)(struct platform_device *dev);
++};
+diff -urNp linux-2.6.30-rc4/kernel/printk.c linux-2.6.30-rc4-karo/kernel/printk.c
+--- linux-2.6.30-rc4/kernel/printk.c	2009-05-13 09:46:19.000000000 +0200
++++ linux-2.6.30-rc4-karo/kernel/printk.c	2009-06-02 17:05:27.000000000 +0200
+@@ -637,9 +637,12 @@ static int acquire_console_semaphore_for
+ static const char recursion_bug_msg [] =
+ 		KERN_CRIT "BUG: recent printk recursion!\n";
+ static int recursion_bug;
+-static int new_text_line = 1;
++	static int new_text_line = 1;
+ static char printk_buf[1024];
+ 
++#ifdef CONFIG_DEBUG_LL
++extern void asmlinkage printascii(const char *);
++#endif
+ asmlinkage int vprintk(const char *fmt, va_list args)
+ {
+ 	int printed_len = 0;
+@@ -687,6 +690,9 @@ asmlinkage int vprintk(const char *fmt, 
+ 				  sizeof(printk_buf) - printed_len, fmt, args);
+ 
+ 
++#ifdef CONFIG_DEBUG_LL
++	printascii(printk_buf);
++#endif
+ 	/*
+ 	 * Copy the output into log_buf.  If the caller didn't provide
+ 	 * appropriate log level tags, we insert them here
diff --git a/recipes/linux/linux_2.6.30.bb b/recipes/linux/linux_2.6.30.bb
index 577b915828..4114de1048 100644
--- a/recipes/linux/linux_2.6.30.bb
+++ b/recipes/linux/linux_2.6.30.bb
@@ -14,3 +14,6 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
            file://defconfig"
 
 SRC_URI_append_mpc8315e-rdb = " file://mpc8315erdb-add-msi-to-dts.patch;patch=1"
+
+SRC_URI_append_tx25 = " file://linux-2.6.30-rc4-karo.diff;patch=1"
+