diff options
author | Koen Kooi <koen@openembedded.org> | 2009-11-05 13:12:39 +0100 |
---|---|---|
committer | Koen Kooi <koen@openembedded.org> | 2009-11-05 13:12:39 +0100 |
commit | f389ecae0287535b6df5cc1a8e2c49e16cf7efed (patch) | |
tree | 6d6132c85eb15851a91c1b16172badc3385f4b69 /recipes/linux | |
parent | 6f0e47264d01494bdf74368acc6330537f6361c7 (diff) |
linux-omap-pm 2.6.29: cleanup some touchbook stuff
Diffstat (limited to 'recipes/linux')
-rw-r--r-- | recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/board-omap3beagle.c | 744 | ||||
-rw-r--r-- | recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/defconfig | 8 |
2 files changed, 5 insertions, 747 deletions
diff --git a/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/board-omap3beagle.c b/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/board-omap3beagle.c deleted file mode 100644 index c7867bef2f..0000000000 --- a/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/board-omap3beagle.c +++ /dev/null @@ -1,744 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3beagle.c - * - * Copyright (C) 2008 Texas Instruments - * - * Modified from mach-omap2/board-3430sdp.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> - -#include <mach/mcspi.h> -#include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> -#include <linux/mma7455l.h> - -#include <mach/dmtimer.h> -#include <linux/backlight.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> -#include <linux/omapfb.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include <mach/board.h> -#include <mach/usb.h> -#include <mach/common.h> -#include <mach/gpmc.h> -#include <mach/nand.h> -#include <mach/mux.h> -#include <mach/omap-pm.h> -#include <mach/clock.h> -#include <mach/display.h> - -#include "twl4030-generic-scripts.h" -#include "mmc-twl4030.h" -#include "pm.h" -#include "omap3-opp.h" - - -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - -#define NAND_BLOCK_SIZE SZ_128K - -#define OMAP3_AC_GPIO 136 //Int1 DRDY -#define OMAP3_TS_GPIO 162 -#define TB_BL_PWM_TIMER 9 -#define TB_KILL_POWER_GPIO 168 - -static struct mtd_partition omap3beagle_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data omap3beagle_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3beagle_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - -static struct resource omap3beagle_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3beagle_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3beagle_nand_data, - }, - .num_resources = 1, - .resource = &omap3beagle_nand_resource, -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap_uart_config omap3_beagle_uart_config __initdata = { - .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), -}; - -static struct twl4030_usb_data beagle_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_hsmmc_info mmc[] = { - { - .mmc = 1, - .wires = 8, - .gpio_wp = 29, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply beagle_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply beagle_vsim_supply = { - .supply = "vmmc_aux", -}; - -static struct gpio_led gpio_leds[]; - -static int beagle_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - - /* link regulators to MMC adapters */ - beagle_vmmc1_supply.dev = mmc[0].dev; - beagle_vsim_supply.dev = mmc[0].dev; - - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - -#if 0 /* TODO: This needs to be modified to not rely on u-boot */ - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - return 0; -} - -static struct twl4030_gpio_platform_data beagle_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = beagle_twl_gpio_setup, -}; - -static struct platform_device omap3_beagle_lcd_device = { - .name = "omap3beagle_lcd", - .id = -1, -}; - -static struct regulator_consumer_supply beagle_vdac_supply = { - .supply = "vdac", - .dev = &omap3_beagle_lcd_device.dev, -}; - -static struct regulator_consumer_supply beagle_vdvi_supply = { - .supply = "vdvi", - .dev = &omap3_beagle_lcd_device.dev, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data beagle_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data beagle_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vsim_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data beagle_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data beagle_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdvi_supply, -}; - -static const struct twl4030_resconfig beagle_resconfig[] = { - /* disable regulators that u-boot left enabled; the - * devices' drivers should be managing these. - */ - { .resource = RES_VAUX3, }, /* not even connected! */ - { .resource = RES_VMMC1, }, - { .resource = RES_VSIM, }, - { .resource = RES_VPLL2, }, - { .resource = RES_VDAC, }, - { .resource = RES_VUSB_1V5, }, - { .resource = RES_VUSB_1V8, }, - { .resource = RES_VUSB_3V1, }, - { 0, }, -}; - -static struct twl4030_power_data beagle_power_data = { - .resource_config = beagle_resconfig, - /* REVISIT can't use GENERIC3430_T2SCRIPTS_DATA; - * among other things, it makes reboot fail. - */ -}; - -static struct twl4030_bci_platform_data touchbook_bci_data = { - .tblsize = 0, - .no_backup_battery = 1, -}; - -static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &beagle_usb_data, - .gpio = &beagle_gpio_data, - .power = &beagle_power_data, - .vmmc1 = &beagle_vmmc1, - .vsim = &beagle_vsim, - .vdac = &beagle_vdac, - .vpll2 = &beagle_vpll2, - - /* TouchBook BCI */ - .bci = &touchbook_bci_data, -}; - -static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &beagle_twldata, - }, -}; - -static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("bq27200", 0x55), - }, -}; - -static int __init omap3_beagle_i2c_init(void) -{ - /* Standard BeagleBoard bus */ - omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, - ARRAY_SIZE(beagle_i2c_boardinfo)); - - /* TouchBook keyboard bus */ - omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, - ARRAY_SIZE(touchBook_i2c_boardinfo)); - - return 0; -} - -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); -} - -static struct ads7846_platform_data ads7846_config = { - .x_min = 100, - .y_min = 265, - .x_max = 3950, - .y_max = 3750, - .x_plate_ohms = 40, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .gpio_pendown = OMAP3_TS_GPIO, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, //(void *) 161, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - -static void __init omap3_beagle_init_irq(void) -{ - omap2_init_common_hw(mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table, - omap3_dsp_rate_table, omap3_l3_rate_table); - omap_init_irq(); - omap_gpio_init(); -} - -static struct gpio_led gpio_leds[] = { - { - .name = "beagleboard::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "beagleboard::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, - { - .name = "beagleboard::pmu_stat", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - .gpio = 7, - .desc = "user", - .wakeup = 1, - }, - { - .code = KEY_POWER, - .gpio = 183, - .desc = "power", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -/* DSS */ - -static int beagle_enable_dvi(struct omap_display *display) -{ - if (display->hw_config.panel_reset_gpio != -1) - gpio_set_value(display->hw_config.panel_reset_gpio, 1); - - return 0; -} - -static void beagle_disable_dvi(struct omap_display *display) -{ - if (display->hw_config.panel_reset_gpio != -1) - gpio_set_value(display->hw_config.panel_reset_gpio, 0); -} - -static struct omap_dss_display_config beagle_display_data_dvi = { - .type = OMAP_DISPLAY_TYPE_DPI, - .name = "dvi", - .panel_name = "panel-generic", - .u.dpi.data_lines = 24, - .panel_reset_gpio = 176, - .panel_enable = beagle_enable_dvi, - .panel_disable = beagle_disable_dvi, -}; - - -static int beagle_panel_enable_tv(struct omap_display *display) -{ -#define ENABLE_VDAC_DEDICATED 0x03 -#define ENABLE_VDAC_DEV_GRP 0x20 - - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - ENABLE_VDAC_DEDICATED, - TWL4030_VDAC_DEDICATED); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, - ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP); - - return 0; -} - -static void beagle_panel_disable_tv(struct omap_display *display) -{ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, - TWL4030_VDAC_DEDICATED); - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00, - TWL4030_VDAC_DEV_GRP); -} - -static struct omap_dss_display_config beagle_display_data_tv = { - .type = OMAP_DISPLAY_TYPE_VENC, - .name = "tv", - .u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, - .panel_enable = beagle_panel_enable_tv, - .panel_disable = beagle_panel_disable_tv, -}; - -static struct omap_dss_board_info beagle_dss_data = { - .num_displays = 2, - .displays = { - &beagle_display_data_dvi, - &beagle_display_data_tv, - } -}; - -static struct platform_device beagle_dss_device = { - .name = "omapdss", - .id = -1, - .dev = { - .platform_data = &beagle_dss_data, - }, -}; - -static void __init beagle_display_init(void) -{ - int r; - - r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset"); - if (r < 0) { - printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_display_data_dvi.panel_reset_gpio, 0); -} - -static struct omap_board_config_kernel omap3_beagle_config[] __initdata = { - { OMAP_TAG_UART, &omap3_beagle_uart_config }, -}; - -static struct platform_device *omap3_beagle_devices[] __initdata = { - &beagle_dss_device, - &leds_gpio, - &keys_gpio, -}; - -static void __init omap3beagle_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3beagle_nand_data.cs = nandcs; - omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3beagle_nand_device) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - -static void __init omap3_mma7455l_init(void) -{ - int ret; - - ret = gpio_request(OMAP3_AC_GPIO, "mma7455l"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for mma7455l IRQ\n", OMAP3_AC_GPIO); - return; - } - - gpio_direction_input(OMAP3_AC_GPIO); -} - -static struct mma7455l_platform_data mma7455l_config = { - .calibration_x = -4, //26 for Beagleboard - .calibration_y = 28, //44 for Beagleboard - .calibration_z = -28, //26 for Beagleboard -}; - -static struct omap2_mcspi_device_config mma7455l_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_mma7455l_spi_board_info[] __initdata = { - { - .modalias = "mma7455l", - .bus_num = 3, - .chip_select = 0, - .max_speed_hz = 200000, - .irq = OMAP_GPIO_IRQ(OMAP3_AC_GPIO), - .controller_data = &mma7455l_mcspi_config, //(void *) 135, - .platform_data = &mma7455l_config, - } -}; - -static int touchbook_backlight_brightness = 50; -static struct omap_dm_timer *touchbook_backlight_pwm; - -static int touchbook_backlight_read(struct backlight_device *bd) -{ - return touchbook_backlight_brightness; -} - -static int touchbook_backlight_update(struct backlight_device *bd) -{ - int value = bd->props.brightness; - touchbook_backlight_brightness = value; - - /* Frequency calculation: - - For 200Hz PWM, you want to load -164 (=> -32768Hz / 200Hz). - - Minimum duty cycle for the backlight is 15%. - - You have (164*0.85) => ~140 levels of brightness. - */ - - /* Convert from 0-100 range to 0-140 range */ - value = (value * 14) / 10 / 2; - - /* For maximum brightness, just stop the timer... */ - if(value != bd->props.max_brightness) - { - omap_dm_timer_set_load(touchbook_backlight_pwm, 1, -164); - omap_dm_timer_set_match(touchbook_backlight_pwm, 1, -24 - value); - omap_dm_timer_write_counter(touchbook_backlight_pwm, -1); - //omap_dm_timer_stop(touchbook_backlight_pwm); - omap_dm_timer_start(touchbook_backlight_pwm); - } - else - omap_dm_timer_stop(touchbook_backlight_pwm); - - - return 0; -} - -static struct backlight_ops touchbook_backlight_properties = { - .get_brightness = touchbook_backlight_read, - .update_status = touchbook_backlight_update, -}; - -static void __init omap3_touchbook_backlight_init(void) -{ - static struct backlight_device *bd; - bd = backlight_device_register("touchbook", NULL, NULL, &touchbook_backlight_properties); - - if(bd) - { - touchbook_backlight_pwm = omap_dm_timer_request_specific(TB_BL_PWM_TIMER); - omap_dm_timer_enable(touchbook_backlight_pwm); - omap_dm_timer_set_source(touchbook_backlight_pwm, OMAP_TIMER_SRC_32_KHZ); - omap_dm_timer_set_pwm(touchbook_backlight_pwm, 1, 1, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE); - - bd->props.max_brightness = 100; - bd->props.brightness = touchbook_backlight_brightness; - } - - touchbook_backlight_update(bd); -} - -static void omap3_touchbook_poweroff(void) -{ - int r; - - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { - printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); -} - -static void __init omap3_beagle_init(void) -{ - pm_power_off = omap3_touchbook_poweroff; - - omap3_beagle_i2c_init(); - platform_add_devices(omap3_beagle_devices, - ARRAY_SIZE(omap3_beagle_devices)); - omap_board_config = omap3_beagle_config; - omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); - omap_serial_init(); - - omap_cfg_reg(J25_34XX_GPIO170); - - omap3beagle_flash_init(); - beagle_display_init(); - omap3_touchbook_backlight_init(); - - /* Touch Book */ - spi_register_board_info(omap3_ads7846_spi_board_info, ARRAY_SIZE(omap3_ads7846_spi_board_info)); - spi_register_board_info(omap3_mma7455l_spi_board_info, ARRAY_SIZE(omap3_mma7455l_spi_board_info)); - - omap3_ads7846_init(); - omap3_mma7455l_init(); - - usb_musb_init(); - usb_ehci_init(); -} - -static void __init omap3_beagle_map_io(void) -{ - omap2_set_globals_343x(); - omap2_map_common_io(); -} - -MACHINE_START(OMAP3_BEAGLE, "OMAP3 Touch Book") - /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ - .phys_io = 0x48000000, - .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, - .boot_params = 0x80000100, - .map_io = omap3_beagle_map_io, - .init_irq = omap3_beagle_init_irq, - .init_machine = omap3_beagle_init, - .timer = &omap_timer, -MACHINE_END diff --git a/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/defconfig b/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/defconfig index e628b28d28..e59c557613 100644 --- a/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/defconfig +++ b/recipes/linux/linux-omap-pm-2.6.29/omap3-touchbook/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.29-omap1 -# Fri Sep 25 11:38:50 2009 +# Thu Nov 5 13:07:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -222,9 +222,10 @@ CONFIG_ARCH_OMAP3430=y # CONFIG_MACH_OMAP_LDP is not set # CONFIG_MACH_OMAP_3430SDP is not set # CONFIG_MACH_OMAP3EVM is not set -CONFIG_MACH_OMAP3_BEAGLE=y +# CONFIG_MACH_OMAP3_BEAGLE is not set # CONFIG_MACH_OVERO is not set # CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y # # Processor Type @@ -1849,7 +1850,7 @@ CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_SOC=y CONFIG_SND_OMAP_SOC=y CONFIG_SND_OMAP_SOC_MCBSP=y -CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y +CONFIG_SND_OMAP_SOC_OMAP3_TOUCHBOOK=y CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_TWL4030=y @@ -1871,6 +1872,7 @@ CONFIG_USB_HID=y # CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y +CONFIG_HID_AI=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y |