rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

4 files changed, 3979 insertions, 0 deletions

diff --git a/recipes/linux/logicpd-pxa270-2.6.17-rc5/defconfig b/recipes/linux/logicpd-pxa270-2.6.17-rc5/defconfig
new file mode 100644
index 0000000000..38b5bf8ec8
--- /dev/null
+++ b/recipes/linux/logicpd-pxa270-2.6.17-rc5/defconfig
@@ -0,0 +1,971 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc5
+# Tue Oct 31 10:23:39 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+CONFIG_MACH_LOGICPD_PXA270=y
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_PXA27x=y
+CONFIG_IWMMXT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 ip=dhcp console=ttyS0,115200 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_LOGICPD_PXA270=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_LOGICPD_CF=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_UCB1400=y
+CONFIG_TOUCHSCREEN_UCB1400=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_PXA_LPD_LQ64D343 is not set
+# CONFIG_FB_PXA_LPD_LQ035Q7DB02 is not set
+# CONFIG_FB_PXA_LPD_LQ057Q3DC02 is not set
+CONFIG_FB_PXA_LPD_LQ10D368=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/recipes/linux/logicpd-pxa270-2.6.17-rc5/linux-2.6.17-rc5.patch b/recipes/linux/logicpd-pxa270-2.6.17-rc5/linux-2.6.17-rc5.patch
new file mode 100644
index 0000000000..074f6e123d
--- /dev/null
+++ b/recipes/linux/logicpd-pxa270-2.6.17-rc5/linux-2.6.17-rc5.patch
@@ -0,0 +1,2183 @@
+Index: arch/arm/configs/lpd270_defconfig

+===================================================================

+RCS file: arch/arm/configs/lpd270_defconfig

+diff -N arch/arm/configs/lpd270_defconfig

+*** /dev/null	1 Jan 1970 00:00:00 -0000

+--- arch/arm/configs/lpd270_defconfig	1 Jun 2006 17:31:13 -0000	1.3

+***************

+*** 0 ****

+--- 1,926 ----

++ #

++ # Automatically generated make config: don't edit

++ # Linux kernel version: 2.6.17-rc5

++ # Tue May 30 12:40:27 2006

++ #

++ CONFIG_ARM=y

++ CONFIG_MMU=y

++ CONFIG_RWSEM_GENERIC_SPINLOCK=y

++ CONFIG_GENERIC_HWEIGHT=y

++ CONFIG_GENERIC_CALIBRATE_DELAY=y

++ CONFIG_ARCH_MTD_XIP=y

++ CONFIG_VECTORS_BASE=0xffff0000

++ 

++ #

++ # Code maturity level options

++ #

++ CONFIG_EXPERIMENTAL=y

++ CONFIG_BROKEN_ON_SMP=y

++ CONFIG_INIT_ENV_ARG_LIMIT=32

++ 

++ #

++ # General setup

++ #

++ CONFIG_LOCALVERSION=""

++ CONFIG_LOCALVERSION_AUTO=y

++ CONFIG_SWAP=y

++ CONFIG_SYSVIPC=y

++ # CONFIG_POSIX_MQUEUE is not set

++ # CONFIG_BSD_PROCESS_ACCT is not set

++ CONFIG_SYSCTL=y

++ # CONFIG_AUDIT is not set

++ # CONFIG_IKCONFIG is not set

++ # CONFIG_RELAY is not set

++ CONFIG_INITRAMFS_SOURCE=""

++ CONFIG_UID16=y

++ CONFIG_CC_OPTIMIZE_FOR_SIZE=y

++ # CONFIG_EMBEDDED is not set

++ CONFIG_KALLSYMS=y

++ # CONFIG_KALLSYMS_ALL is not set

++ # CONFIG_KALLSYMS_EXTRA_PASS is not set

++ CONFIG_HOTPLUG=y

++ CONFIG_PRINTK=y

++ CONFIG_BUG=y

++ CONFIG_ELF_CORE=y

++ CONFIG_BASE_FULL=y

++ CONFIG_FUTEX=y

++ CONFIG_EPOLL=y

++ CONFIG_SHMEM=y

++ CONFIG_SLAB=y

++ # CONFIG_TINY_SHMEM is not set

++ CONFIG_BASE_SMALL=0

++ # CONFIG_SLOB is not set

++ CONFIG_OBSOLETE_INTERMODULE=y

++ 

++ #

++ # Loadable module support

++ #

++ CONFIG_MODULES=y

++ # CONFIG_MODULE_UNLOAD is not set

++ # CONFIG_MODVERSIONS is not set

++ # CONFIG_MODULE_SRCVERSION_ALL is not set

++ # CONFIG_KMOD is not set

++ 

++ #

++ # Block layer

++ #

++ # CONFIG_BLK_DEV_IO_TRACE is not set

++ 

++ #

++ # IO Schedulers

++ #

++ CONFIG_IOSCHED_NOOP=y

++ CONFIG_IOSCHED_AS=y

++ CONFIG_IOSCHED_DEADLINE=y

++ CONFIG_IOSCHED_CFQ=y

++ CONFIG_DEFAULT_AS=y

++ # CONFIG_DEFAULT_DEADLINE is not set

++ # CONFIG_DEFAULT_CFQ is not set

++ # CONFIG_DEFAULT_NOOP is not set

++ CONFIG_DEFAULT_IOSCHED="anticipatory"

++ 

++ #

++ # System Type

++ #

++ # CONFIG_ARCH_CLPS7500 is not set

++ # CONFIG_ARCH_CLPS711X is not set

++ # CONFIG_ARCH_CO285 is not set

++ # CONFIG_ARCH_EBSA110 is not set

++ # CONFIG_ARCH_EP93XX is not set

++ # CONFIG_ARCH_FOOTBRIDGE is not set

++ # CONFIG_ARCH_INTEGRATOR is not set

++ # CONFIG_ARCH_IOP3XX is not set

++ # CONFIG_ARCH_IXP4XX is not set

++ # CONFIG_ARCH_IXP2000 is not set

++ # CONFIG_ARCH_IXP23XX is not set

++ # CONFIG_ARCH_L7200 is not set

++ CONFIG_ARCH_PXA=y

++ # CONFIG_ARCH_RPC is not set

++ # CONFIG_ARCH_SA1100 is not set

++ # CONFIG_ARCH_S3C2410 is not set

++ # CONFIG_ARCH_SHARK is not set

++ # CONFIG_ARCH_LH7A40X is not set

++ # CONFIG_ARCH_OMAP is not set

++ # CONFIG_ARCH_VERSATILE is not set

++ # CONFIG_ARCH_REALVIEW is not set

++ # CONFIG_ARCH_IMX is not set

++ # CONFIG_ARCH_H720X is not set

++ # CONFIG_ARCH_AAEC2000 is not set

++ # CONFIG_ARCH_AT91RM9200 is not set

++ 

++ #

++ # Intel PXA2xx Implementations

++ #

++ # CONFIG_ARCH_LUBBOCK is not set

++ CONFIG_MACH_LOGICPD_PXA270=y

++ # CONFIG_MACH_MAINSTONE is not set

++ # CONFIG_ARCH_PXA_IDP is not set

++ # CONFIG_PXA_SHARPSL is not set

++ CONFIG_PXA27x=y

++ CONFIG_IWMMXT=y

++ 

++ #

++ # Processor Type

++ #

++ CONFIG_CPU_32=y

++ CONFIG_CPU_XSCALE=y

++ CONFIG_CPU_32v5=y

++ CONFIG_CPU_ABRT_EV5T=y

++ CONFIG_CPU_CACHE_VIVT=y

++ CONFIG_CPU_TLB_V4WBI=y

++ 

++ #

++ # Processor Features

++ #

++ # CONFIG_ARM_THUMB is not set

++ CONFIG_XSCALE_PMU=y

++ 

++ #

++ # Bus support

++ #

++ 

++ #

++ # PCCARD (PCMCIA/CardBus) support

++ #

++ # CONFIG_PCCARD is not set

++ 

++ #

++ # Kernel Features

++ #

++ # CONFIG_PREEMPT is not set

++ # CONFIG_NO_IDLE_HZ is not set

++ CONFIG_HZ=100

++ # CONFIG_AEABI is not set

++ # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set

++ CONFIG_SELECT_MEMORY_MODEL=y

++ CONFIG_FLATMEM_MANUAL=y

++ # CONFIG_DISCONTIGMEM_MANUAL is not set

++ # CONFIG_SPARSEMEM_MANUAL is not set

++ CONFIG_FLATMEM=y

++ CONFIG_FLAT_NODE_MEM_MAP=y

++ # CONFIG_SPARSEMEM_STATIC is not set

++ CONFIG_SPLIT_PTLOCK_CPUS=4096

++ CONFIG_ALIGNMENT_TRAP=y

++ 

++ #

++ # Boot options

++ #

++ CONFIG_ZBOOT_ROM_TEXT=0x0

++ CONFIG_ZBOOT_ROM_BSS=0x0

++ CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 ip=dhcp console=ttyS0,115200 mem=64M"

++ #CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.3.5:/opt/nfs-exports/pxa-nfs-root ip=dhcp console=ttyS0,115200 mem=64M"

++ # CONFIG_XIP_KERNEL is not set

++ 

++ #

++ # Floating point emulation

++ #

++ 

++ #

++ # At least one emulation must be selected

++ #

++ CONFIG_FPE_NWFPE=y

++ # CONFIG_FPE_NWFPE_XP is not set

++ # CONFIG_FPE_FASTFPE is not set

++ 

++ #

++ # Userspace binary formats

++ #

++ CONFIG_BINFMT_ELF=y

++ # CONFIG_BINFMT_AOUT is not set

++ # CONFIG_BINFMT_MISC is not set

++ # CONFIG_ARTHUR is not set

++ 

++ #

++ # Power management options

++ #

++ # CONFIG_PM is not set

++ # CONFIG_APM is not set

++ 

++ #

++ # Networking

++ #

++ CONFIG_NET=y

++ 

++ #

++ # Networking options

++ #

++ # CONFIG_NETDEBUG is not set

++ # CONFIG_PACKET is not set

++ CONFIG_UNIX=y

++ # CONFIG_NET_KEY is not set

++ CONFIG_INET=y

++ # CONFIG_IP_MULTICAST is not set

++ # CONFIG_IP_ADVANCED_ROUTER is not set

++ CONFIG_IP_FIB_HASH=y

++ CONFIG_IP_PNP=y

++ CONFIG_IP_PNP_DHCP=y

++ # CONFIG_IP_PNP_BOOTP is not set

++ # CONFIG_IP_PNP_RARP is not set

++ # CONFIG_NET_IPIP is not set

++ # CONFIG_NET_IPGRE is not set

++ # CONFIG_ARPD is not set

++ # CONFIG_SYN_COOKIES is not set

++ # CONFIG_INET_AH is not set

++ # CONFIG_INET_ESP is not set

++ # CONFIG_INET_IPCOMP is not set

++ # CONFIG_INET_XFRM_TUNNEL is not set

++ # CONFIG_INET_TUNNEL is not set

++ CONFIG_INET_DIAG=y

++ CONFIG_INET_TCP_DIAG=y

++ # CONFIG_TCP_CONG_ADVANCED is not set

++ CONFIG_TCP_CONG_BIC=y

++ # CONFIG_IPV6 is not set

++ # CONFIG_INET6_XFRM_TUNNEL is not set

++ # CONFIG_INET6_TUNNEL is not set

++ # CONFIG_NETFILTER is not set

++ 

++ #

++ # DCCP Configuration (EXPERIMENTAL)

++ #

++ # CONFIG_IP_DCCP is not set

++ 

++ #

++ # SCTP Configuration (EXPERIMENTAL)

++ #

++ # CONFIG_IP_SCTP is not set

++ 

++ #

++ # TIPC Configuration (EXPERIMENTAL)

++ #

++ # CONFIG_TIPC is not set

++ # CONFIG_ATM is not set

++ # CONFIG_BRIDGE is not set

++ # CONFIG_VLAN_8021Q is not set

++ # CONFIG_DECNET is not set

++ # CONFIG_LLC2 is not set

++ # CONFIG_IPX is not set

++ # CONFIG_ATALK is not set

++ # CONFIG_X25 is not set

++ # CONFIG_LAPB is not set

++ # CONFIG_NET_DIVERT is not set

++ # CONFIG_ECONET is not set

++ # CONFIG_WAN_ROUTER is not set

++ 

++ #

++ # QoS and/or fair queueing

++ #

++ # CONFIG_NET_SCHED is not set

++ 

++ #

++ # Network testing

++ #

++ # CONFIG_NET_PKTGEN is not set

++ # CONFIG_HAMRADIO is not set

++ # CONFIG_IRDA is not set

++ # CONFIG_BT is not set

++ # CONFIG_IEEE80211 is not set

++ 

++ #

++ # Device Drivers

++ #

++ 

++ #

++ # Generic Driver Options

++ #

++ CONFIG_STANDALONE=y

++ CONFIG_PREVENT_FIRMWARE_BUILD=y

++ # CONFIG_FW_LOADER is not set

++ # CONFIG_DEBUG_DRIVER is not set

++ 

++ #

++ # Connector - unified userspace <-> kernelspace linker

++ #

++ # CONFIG_CONNECTOR is not set

++ 

++ #

++ # Memory Technology Devices (MTD)

++ #

++ CONFIG_MTD=y

++ # CONFIG_MTD_DEBUG is not set

++ # CONFIG_MTD_CONCAT is not set

++ CONFIG_MTD_PARTITIONS=y

++ CONFIG_MTD_REDBOOT_PARTS=y

++ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1

++ # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set

++ # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

++ # CONFIG_MTD_CMDLINE_PARTS is not set

++ # CONFIG_MTD_AFS_PARTS is not set

++ 

++ #

++ # User Modules And Translation Layers

++ #

++ CONFIG_MTD_CHAR=y

++ CONFIG_MTD_BLOCK=y

++ # CONFIG_FTL is not set

++ # CONFIG_NFTL is not set

++ # CONFIG_INFTL is not set

++ # CONFIG_RFD_FTL is not set

++ 

++ #

++ # RAM/ROM/Flash chip drivers

++ #

++ CONFIG_MTD_CFI=y

++ # CONFIG_MTD_JEDECPROBE is not set

++ CONFIG_MTD_GEN_PROBE=y

++ CONFIG_MTD_CFI_ADV_OPTIONS=y

++ CONFIG_MTD_CFI_NOSWAP=y

++ # CONFIG_MTD_CFI_BE_BYTE_SWAP is not set

++ # CONFIG_MTD_CFI_LE_BYTE_SWAP is not set

++ CONFIG_MTD_CFI_GEOMETRY=y

++ CONFIG_MTD_MAP_BANK_WIDTH_1=y

++ CONFIG_MTD_MAP_BANK_WIDTH_2=y

++ CONFIG_MTD_MAP_BANK_WIDTH_4=y

++ # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set

++ # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set

++ # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set

++ # CONFIG_MTD_CFI_I1 is not set

++ CONFIG_MTD_CFI_I2=y

++ # CONFIG_MTD_CFI_I4 is not set

++ # CONFIG_MTD_CFI_I8 is not set

++ # CONFIG_MTD_OTP is not set

++ CONFIG_MTD_CFI_INTELEXT=y

++ # CONFIG_MTD_CFI_AMDSTD is not set

++ # CONFIG_MTD_CFI_STAA is not set

++ CONFIG_MTD_CFI_UTIL=y

++ # CONFIG_MTD_RAM is not set

++ # CONFIG_MTD_ROM is not set

++ # CONFIG_MTD_ABSENT is not set

++ # CONFIG_MTD_OBSOLETE_CHIPS is not set

++ # CONFIG_MTD_XIP is not set

++ 

++ #

++ # Mapping drivers for chip access

++ #

++ # CONFIG_MTD_COMPLEX_MAPPINGS is not set

++ # CONFIG_MTD_PHYSMAP is not set

++ CONFIG_MTD_LOGICPD_PXA270=y

++ # CONFIG_MTD_ARM_INTEGRATOR is not set

++ # CONFIG_MTD_SHARP_SL is not set

++ # CONFIG_MTD_PLATRAM is not set

++ 

++ #

++ # Self-contained MTD device drivers

++ #

++ # CONFIG_MTD_SLRAM is not set

++ # CONFIG_MTD_PHRAM is not set

++ # CONFIG_MTD_MTDRAM is not set

++ # CONFIG_MTD_BLOCK2MTD is not set

++ 

++ #

++ # Disk-On-Chip Device Drivers

++ #

++ # CONFIG_MTD_DOC2000 is not set

++ # CONFIG_MTD_DOC2001 is not set

++ # CONFIG_MTD_DOC2001PLUS is not set

++ 

++ #

++ # NAND Flash Device Drivers

++ #

++ # CONFIG_MTD_NAND is not set

++ 

++ #

++ # OneNAND Flash Device Drivers

++ #

++ # CONFIG_MTD_ONENAND is not set

++ 

++ #

++ # Parallel port support

++ #

++ # CONFIG_PARPORT is not set

++ 

++ #

++ # Plug and Play support

++ #

++ 

++ #

++ # Block devices

++ #

++ CONFIG_BLK_DEV_LOGICPD_CF=y

++ # CONFIG_BLK_DEV_COW_COMMON is not set

++ # CONFIG_BLK_DEV_LOOP is not set

++ # CONFIG_BLK_DEV_NBD is not set

++ # CONFIG_BLK_DEV_RAM is not set

++ # CONFIG_BLK_DEV_INITRD is not set

++ # CONFIG_CDROM_PKTCDVD is not set

++ # CONFIG_ATA_OVER_ETH is not set

++ 

++ #

++ # ATA/ATAPI/MFM/RLL support

++ #

++ CONFIG_IDE=y

++ CONFIG_BLK_DEV_IDE=y

++ 

++ #

++ # Please see Documentation/ide.txt for help/info on IDE drives

++ #

++ # CONFIG_BLK_DEV_IDE_SATA is not set

++ CONFIG_BLK_DEV_IDEDISK=y

++ # CONFIG_IDEDISK_MULTI_MODE is not set

++ # CONFIG_BLK_DEV_IDECD is not set

++ # CONFIG_BLK_DEV_IDETAPE is not set

++ # CONFIG_BLK_DEV_IDEFLOPPY is not set

++ # CONFIG_IDE_TASK_IOCTL is not set

++ 

++ #

++ # IDE chipset support/bugfixes

++ #

++ # CONFIG_IDE_GENERIC is not set

++ # CONFIG_IDE_ARM is not set

++ # CONFIG_BLK_DEV_IDEDMA is not set

++ # CONFIG_IDEDMA_AUTO is not set

++ # CONFIG_BLK_DEV_HD is not set

++ 

++ #

++ # SCSI device support

++ #

++ # CONFIG_RAID_ATTRS is not set

++ # CONFIG_SCSI is not set

++ 

++ #

++ # Multi-device support (RAID and LVM)

++ #

++ # CONFIG_MD is not set

++ 

++ #

++ # Fusion MPT device support

++ #

++ # CONFIG_FUSION is not set

++ 

++ #

++ # IEEE 1394 (FireWire) support

++ #

++ 

++ #

++ # I2O device support

++ #

++ 

++ #

++ # Network device support

++ #

++ CONFIG_NETDEVICES=y

++ # CONFIG_DUMMY is not set

++ # CONFIG_BONDING is not set

++ # CONFIG_EQUALIZER is not set

++ # CONFIG_TUN is not set

++ 

++ #

++ # PHY device support

++ #

++ # CONFIG_PHYLIB is not set

++ 

++ #

++ # Ethernet (10 or 100Mbit)

++ #

++ CONFIG_NET_ETHERNET=y

++ CONFIG_MII=y

++ CONFIG_SMC91X=y

++ # CONFIG_DM9000 is not set

++ 

++ #

++ # Ethernet (1000 Mbit)

++ #

++ 

++ #

++ # Ethernet (10000 Mbit)

++ #

++ 

++ #

++ # Token Ring devices

++ #

++ 

++ #

++ # Wireless LAN (non-hamradio)

++ #

++ # CONFIG_NET_RADIO is not set

++ 

++ #

++ # Wan interfaces

++ #

++ # CONFIG_WAN is not set

++ # CONFIG_PPP is not set

++ # CONFIG_SLIP is not set

++ # CONFIG_SHAPER is not set

++ # CONFIG_NETCONSOLE is not set

++ # CONFIG_NETPOLL is not set

++ # CONFIG_NET_POLL_CONTROLLER is not set

++ 

++ #

++ # ISDN subsystem

++ #

++ # CONFIG_ISDN is not set

++ 

++ #

++ # Input device support

++ #

++ CONFIG_INPUT=y

++ 

++ #

++ # Userland interfaces

++ #

++ CONFIG_INPUT_MOUSEDEV=y

++ CONFIG_INPUT_MOUSEDEV_PSAUX=y

++ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024

++ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768

++ # CONFIG_INPUT_JOYDEV is not set

++ # CONFIG_INPUT_TSDEV is not set

++ CONFIG_INPUT_EVDEV=y

++ # CONFIG_INPUT_EVBUG is not set

++ 

++ #

++ # Input Device Drivers

++ #

++ CONFIG_INPUT_KEYBOARD=y

++ CONFIG_KEYBOARD_ATKBD=y

++ # CONFIG_KEYBOARD_SUNKBD is not set

++ # CONFIG_KEYBOARD_LKKBD is not set

++ # CONFIG_KEYBOARD_XTKBD is not set

++ # CONFIG_KEYBOARD_NEWTON is not set

++ # CONFIG_INPUT_MOUSE is not set

++ # CONFIG_INPUT_JOYSTICK is not set

++ # CONFIG_INPUT_TOUCHSCREEN is not set

++ # CONFIG_INPUT_MISC is not set

++ 

++ #

++ # Hardware I/O ports

++ #

++ CONFIG_SERIO=y

++ # CONFIG_SERIO_SERPORT is not set

++ CONFIG_SERIO_LIBPS2=y

++ # CONFIG_SERIO_RAW is not set

++ # CONFIG_GAMEPORT is not set

++ 

++ #

++ # Character devices

++ #

++ CONFIG_VT=y

++ CONFIG_VT_CONSOLE=y

++ CONFIG_HW_CONSOLE=y

++ # CONFIG_SERIAL_NONSTANDARD is not set

++ 

++ #

++ # Serial drivers

++ #

++ # CONFIG_SERIAL_8250 is not set

++ 

++ #

++ # Non-8250 serial port support

++ #

++ CONFIG_SERIAL_PXA=y

++ CONFIG_SERIAL_PXA_CONSOLE=y

++ CONFIG_SERIAL_CORE=y

++ CONFIG_SERIAL_CORE_CONSOLE=y

++ CONFIG_UNIX98_PTYS=y

++ CONFIG_LEGACY_PTYS=y

++ CONFIG_LEGACY_PTY_COUNT=256

++ 

++ #

++ # IPMI

++ #

++ # CONFIG_IPMI_HANDLER is not set

++ 

++ #

++ # Watchdog Cards

++ #

++ # CONFIG_WATCHDOG is not set

++ # CONFIG_NVRAM is not set

++ # CONFIG_DTLK is not set

++ # CONFIG_R3964 is not set

++ 

++ #

++ # Ftape, the floppy tape device driver

++ #

++ # CONFIG_RAW_DRIVER is not set

++ 

++ #

++ # TPM devices

++ #

++ # CONFIG_TCG_TPM is not set

++ # CONFIG_TELCLOCK is not set

++ 

++ #

++ # I2C support

++ #

++ # CONFIG_I2C is not set

++ 

++ #

++ # SPI support

++ #

++ # CONFIG_SPI is not set

++ # CONFIG_SPI_MASTER is not set

++ 

++ #

++ # Dallas's 1-wire bus

++ #

++ # CONFIG_W1 is not set

++ 

++ #

++ # Hardware Monitoring support

++ #

++ CONFIG_HWMON=y

++ # CONFIG_HWMON_VID is not set

++ # CONFIG_SENSORS_F71805F is not set

++ # CONFIG_HWMON_DEBUG_CHIP is not set

++ 

++ #

++ # Misc devices

++ #

++ 

++ #

++ # LED devices

++ #

++ # CONFIG_NEW_LEDS is not set

++ 

++ #

++ # LED drivers

++ #

++ 

++ #

++ # LED Triggers

++ #

++ 

++ #

++ # Multimedia devices

++ #

++ # CONFIG_VIDEO_DEV is not set

++ CONFIG_VIDEO_V4L2=y

++ 

++ #

++ # Digital Video Broadcasting Devices

++ #

++ # CONFIG_DVB is not set

++ 

++ #

++ # Graphics support

++ #

++ CONFIG_FB=y

++ CONFIG_FB_CFB_FILLRECT=y

++ CONFIG_FB_CFB_COPYAREA=y

++ CONFIG_FB_CFB_IMAGEBLIT=y

++ # CONFIG_FB_MACMODES is not set

++ CONFIG_FB_FIRMWARE_EDID=y

++ # CONFIG_FB_MODE_HELPERS is not set

++ # CONFIG_FB_TILEBLITTING is not set

++ # CONFIG_FB_S1D13XXX is not set

++ CONFIG_FB_PXA=y

++ # CONFIG_FB_PXA_PARAMETERS is not set

++ # CONFIG_FB_PXA_LPD_LQ64D343 is not set

++ # CONFIG_FB_PXA_LPD_LQ035Q7DB02 is not set

++ # CONFIG_FB_PXA_LPD_LQ057Q3DC02 is not set

++ CONFIG_FB_PXA_LPD_LQ10D368=y

++ # CONFIG_FB_VIRTUAL is not set

++ 

++ #

++ # Console display driver support

++ #

++ # CONFIG_VGA_CONSOLE is not set

++ CONFIG_DUMMY_CONSOLE=y

++ CONFIG_FRAMEBUFFER_CONSOLE=y

++ # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set

++ # CONFIG_FONTS is not set

++ CONFIG_FONT_8x8=y

++ CONFIG_FONT_8x16=y

++ 

++ #

++ # Logo configuration

++ #

++ CONFIG_LOGO=y

++ CONFIG_LOGO_LINUX_MONO=y

++ CONFIG_LOGO_LINUX_VGA16=y

++ CONFIG_LOGO_LINUX_CLUT224=y

++ # CONFIG_BACKLIGHT_LCD_SUPPORT is not set

++ 

++ #

++ # Sound

++ #

++ # CONFIG_SOUND is not set

++ 

++ #

++ # USB support

++ #

++ CONFIG_USB_ARCH_HAS_HCD=y

++ CONFIG_USB_ARCH_HAS_OHCI=y

++ # CONFIG_USB_ARCH_HAS_EHCI is not set

++ # CONFIG_USB is not set

++ 

++ #

++ # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

++ #

++ 

++ #

++ # USB Gadget Support

++ #

++ # CONFIG_USB_GADGET is not set

++ 

++ #

++ # MMC/SD Card support

++ #

++ # CONFIG_MMC is not set

++ 

++ #

++ # Real Time Clock

++ #

++ CONFIG_RTC_LIB=y

++ # CONFIG_RTC_CLASS is not set

++ 

++ #

++ # File systems

++ #

++ CONFIG_EXT2_FS=y

++ # CONFIG_EXT2_FS_XATTR is not set

++ # CONFIG_EXT2_FS_XIP is not set

++ # CONFIG_EXT3_FS is not set

++ # CONFIG_REISERFS_FS is not set

++ # CONFIG_JFS_FS is not set

++ # CONFIG_FS_POSIX_ACL is not set

++ # CONFIG_XFS_FS is not set

++ # CONFIG_OCFS2_FS is not set

++ # CONFIG_MINIX_FS is not set

++ # CONFIG_ROMFS_FS is not set

++ CONFIG_INOTIFY=y

++ # CONFIG_QUOTA is not set

++ CONFIG_DNOTIFY=y

++ # CONFIG_AUTOFS_FS is not set

++ # CONFIG_AUTOFS4_FS is not set

++ # CONFIG_FUSE_FS is not set

++ 

++ #

++ # CD-ROM/DVD Filesystems

++ #

++ # CONFIG_ISO9660_FS is not set

++ # CONFIG_UDF_FS is not set

++ 

++ #

++ # DOS/FAT/NT Filesystems

++ #

++ CONFIG_FAT_FS=y

++ CONFIG_MSDOS_FS=y

++ CONFIG_VFAT_FS=y

++ CONFIG_FAT_DEFAULT_CODEPAGE=437

++ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"

++ # CONFIG_NTFS_FS is not set

++ 

++ #

++ # Pseudo filesystems

++ #

++ CONFIG_PROC_FS=y

++ CONFIG_SYSFS=y

++ # CONFIG_TMPFS is not set

++ # CONFIG_HUGETLB_PAGE is not set

++ CONFIG_RAMFS=y

++ # CONFIG_CONFIGFS_FS is not set

++ 

++ #

++ # Miscellaneous filesystems

++ #

++ # CONFIG_ADFS_FS is not set

++ # CONFIG_AFFS_FS is not set

++ # CONFIG_HFS_FS is not set

++ # CONFIG_HFSPLUS_FS is not set

++ # CONFIG_BEFS_FS is not set

++ # CONFIG_BFS_FS is not set

++ # CONFIG_EFS_FS is not set

++ # CONFIG_JFFS_FS is not set

++ CONFIG_JFFS2_FS=y

++ CONFIG_JFFS2_FS_DEBUG=0

++ CONFIG_JFFS2_FS_WRITEBUFFER=y

++ # CONFIG_JFFS2_SUMMARY is not set

++ # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set

++ CONFIG_JFFS2_ZLIB=y

++ CONFIG_JFFS2_RTIME=y

++ # CONFIG_JFFS2_RUBIN is not set

++ # CONFIG_CRAMFS is not set

++ # CONFIG_VXFS_FS is not set

++ # CONFIG_HPFS_FS is not set

++ # CONFIG_QNX4FS_FS is not set

++ # CONFIG_SYSV_FS is not set

++ # CONFIG_UFS_FS is not set

++ 

++ #

++ # Network File Systems

++ #

++ CONFIG_NFS_FS=y

++ CONFIG_NFS_V3=y

++ # CONFIG_NFS_V3_ACL is not set

++ # CONFIG_NFS_V4 is not set

++ # CONFIG_NFS_DIRECTIO is not set

++ # CONFIG_NFSD is not set

++ CONFIG_ROOT_NFS=y

++ CONFIG_LOCKD=y

++ CONFIG_LOCKD_V4=y

++ CONFIG_NFS_COMMON=y

++ CONFIG_SUNRPC=y

++ # CONFIG_RPCSEC_GSS_KRB5 is not set

++ # CONFIG_RPCSEC_GSS_SPKM3 is not set

++ # CONFIG_SMB_FS is not set

++ # CONFIG_CIFS is not set

++ # CONFIG_NCP_FS is not set

++ # CONFIG_CODA_FS is not set

++ # CONFIG_AFS_FS is not set

++ # CONFIG_9P_FS is not set

++ 

++ #

++ # Partition Types

++ #

++ # CONFIG_PARTITION_ADVANCED is not set

++ CONFIG_MSDOS_PARTITION=y

++ 

++ #

++ # Native Language Support

++ #

++ CONFIG_NLS=y

++ CONFIG_NLS_DEFAULT="iso8859-1"

++ CONFIG_NLS_CODEPAGE_437=y

++ # CONFIG_NLS_CODEPAGE_737 is not set

++ # CONFIG_NLS_CODEPAGE_775 is not set

++ # CONFIG_NLS_CODEPAGE_850 is not set

++ # CONFIG_NLS_CODEPAGE_852 is not set

++ # CONFIG_NLS_CODEPAGE_855 is not set

++ # CONFIG_NLS_CODEPAGE_857 is not set

++ # CONFIG_NLS_CODEPAGE_860 is not set

++ # CONFIG_NLS_CODEPAGE_861 is not set

++ # CONFIG_NLS_CODEPAGE_862 is not set

++ # CONFIG_NLS_CODEPAGE_863 is not set

++ # CONFIG_NLS_CODEPAGE_864 is not set

++ # CONFIG_NLS_CODEPAGE_865 is not set

++ # CONFIG_NLS_CODEPAGE_866 is not set

++ # CONFIG_NLS_CODEPAGE_869 is not set

++ # CONFIG_NLS_CODEPAGE_936 is not set

++ # CONFIG_NLS_CODEPAGE_950 is not set

++ # CONFIG_NLS_CODEPAGE_932 is not set

++ # CONFIG_NLS_CODEPAGE_949 is not set

++ # CONFIG_NLS_CODEPAGE_874 is not set

++ # CONFIG_NLS_ISO8859_8 is not set

++ # CONFIG_NLS_CODEPAGE_1250 is not set

++ # CONFIG_NLS_CODEPAGE_1251 is not set

++ # CONFIG_NLS_ASCII is not set

++ CONFIG_NLS_ISO8859_1=y

++ # CONFIG_NLS_ISO8859_2 is not set

++ # CONFIG_NLS_ISO8859_3 is not set

++ # CONFIG_NLS_ISO8859_4 is not set

++ # CONFIG_NLS_ISO8859_5 is not set

++ # CONFIG_NLS_ISO8859_6 is not set

++ # CONFIG_NLS_ISO8859_7 is not set

++ # CONFIG_NLS_ISO8859_9 is not set

++ # CONFIG_NLS_ISO8859_13 is not set

++ # CONFIG_NLS_ISO8859_14 is not set

++ # CONFIG_NLS_ISO8859_15 is not set

++ # CONFIG_NLS_KOI8_R is not set

++ # CONFIG_NLS_KOI8_U is not set

++ # CONFIG_NLS_UTF8 is not set

++ 

++ #

++ # Profiling support

++ #

++ # CONFIG_PROFILING is not set

++ 

++ #

++ # Kernel hacking

++ #

++ # CONFIG_PRINTK_TIME is not set

++ CONFIG_MAGIC_SYSRQ=y

++ CONFIG_DEBUG_KERNEL=y

++ CONFIG_LOG_BUF_SHIFT=14

++ CONFIG_DETECT_SOFTLOCKUP=y

++ # CONFIG_SCHEDSTATS is not set

++ # CONFIG_DEBUG_SLAB is not set

++ # CONFIG_DEBUG_MUTEXES is not set

++ # CONFIG_DEBUG_SPINLOCK is not set

++ # CONFIG_DEBUG_SPINLOCK_SLEEP is not set

++ # CONFIG_DEBUG_KOBJECT is not set

++ CONFIG_DEBUG_BUGVERBOSE=y

++ CONFIG_DEBUG_INFO=y

++ # CONFIG_DEBUG_FS is not set

++ # CONFIG_DEBUG_VM is not set

++ CONFIG_FRAME_POINTER=y

++ # CONFIG_UNWIND_INFO is not set

++ CONFIG_FORCED_INLINING=y

++ # CONFIG_RCU_TORTURE_TEST is not set

++ CONFIG_DEBUG_USER=y

++ # CONFIG_DEBUG_WAITQ is not set

++ CONFIG_DEBUG_ERRORS=y

++ CONFIG_DEBUG_LL=y

++ # CONFIG_DEBUG_ICEDCC is not set

++ 

++ #

++ # Security options

++ #

++ # CONFIG_KEYS is not set

++ # CONFIG_SECURITY is not set

++ 

++ #

++ # Cryptographic options

++ #

++ # CONFIG_CRYPTO is not set

++ 

++ #

++ # Hardware crypto devices

++ #

++ 

++ #

++ # Library routines

++ #

++ # CONFIG_CRC_CCITT is not set

++ # CONFIG_CRC16 is not set

++ CONFIG_CRC32=y

++ # CONFIG_LIBCRC32C is not set

++ CONFIG_ZLIB_INFLATE=y

++ CONFIG_ZLIB_DEFLATE=y

+Index: arch/arm/kernel/head.S

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/arch/arm/kernel/head.S,v

+retrieving revision 1.1.1.1

+diff -c -3 -p -r1.1.1.1 head.S

+*** arch/arm/kernel/head.S	29 May 2006 00:53:47 -0000	1.1.1.1

+--- arch/arm/kernel/head.S	1 Jun 2006 17:37:16 -0000

+*************** ENTRY(stext)

+*** 74,79 ****

+--- 74,93 ----

+  	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode

+  						@ and irqs disabled

+  	mrc	p15, 0, r9, c0, c0		@ get processor id

++ 

++ 	/* LPD--

++ 	 * This fakes out the Linux kernel into believing that it is

++ 	 * running on a Mainstone hardware platform. The LogicLoader (LoLo)

++ 	 * doesn't currently pass kernel parameters correctly for 2.6 ARM

++ 	 * kernels. Therefore, we just hardcode it here.

++ 	 *

++ 	 * --LPD

++ 	 */

++ 	mov	r0, #0

++ 	mov	r1, #0x300

++ 	orr	r1, r1, #0x0a0

++ 	orr	r1, r1, #0x002

++ 

+  	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid

+  	movs	r10, r5				@ invalid processor (r5=0)?

+  	beq	__error_p			@ yes, error 'p'

+Index: arch/arm/mach-pxa/lpd270.c

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/arch/arm/mach-pxa/lpd270.c,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** arch/arm/mach-pxa/lpd270.c	29 May 2006 00:53:55 -0000	1.1.1.1

+--- arch/arm/mach-pxa/lpd270.c	1 Jun 2006 17:04:24 -0000	1.2

+*************** static void lpd270_backlight_power(int o

+*** 246,288 ****

+  	}

+  }

+  

+! /* 5.7" TFT QVGA (LoLo display number 1) */

+! static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {

+! 	.pixclock		= 100000,

+! 	.xres			= 240,

+! 	.yres			= 320,

+! 	.bpp			= 16,

+! 	.hsync_len		= 64,

+! 	.left_margin		= 0x27,

+! 	.right_margin		= 0x09,

+! 	.vsync_len		= 0x04,

+! 	.upper_margin		= 0x08,

+! 	.lower_margin		= 0x14,

+! 	.sync			= 0,

+! 	.lccr0			= 0x07800080,

+! 	.lccr3			= 0x04400007,

+! 	.pxafb_backlight_power	= lpd270_backlight_power,

+! };

+! 

+  /* 6.4" TFT VGA (LoLo display number 5) */

+  static struct pxafb_mach_info sharp_lq64d343 __initdata = {

+  	.pixclock		= 20000,

+  	.xres			= 640,

+  	.yres			= 480,

+  	.bpp			= 16,

+! 	.hsync_len		= 49,

+! 	.left_margin		= 0x89,

+! 	.right_margin		= 0x19,

+! 	.vsync_len		= 18,

+  	.upper_margin		= 0x22,

+  	.lower_margin		= 0,

+! 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,

+! 	.lccr0			= 0x07800080,

+  	.lccr3			= 0x04400001,

+  	.pxafb_backlight_power	= lpd270_backlight_power,

+  };

+  

+! /* 3.5" TFT QVGA (LoLo display number 8) */

+  static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {

+  	.pixclock		= 100000,

+  	.xres			= 240,

+--- 246,273 ----

+  	}

+  }

+  

+! #ifdef CONFIG_FB_PXA_LPD_LQ64D343

+  /* 6.4" TFT VGA (LoLo display number 5) */

+  static struct pxafb_mach_info sharp_lq64d343 __initdata = {

+  	.pixclock		= 20000,

+  	.xres			= 640,

+  	.yres			= 480,

+  	.bpp			= 16,

+! 	.hsync_len		= 64,

+! 	.left_margin		= 0x88,

+! 	.right_margin		= 0x18,

+! 	.vsync_len		= 64,

+  	.upper_margin		= 0x22,

+  	.lower_margin		= 0,

+! 	.sync			= 0,

+! 	.lccr0			= 0x078000f9,

+  	.lccr3			= 0x04400001,

+  	.pxafb_backlight_power	= lpd270_backlight_power,

+  };

++ #endif

+  

+! #ifdef CONFIG_FB_PXA_LPD_LQ035Q7DB02

+! /* 3.5" TFT QVGA (LoLo display number 8) */ 

+  static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {

+  	.pixclock		= 100000,

+  	.xres			= 240,

+*************** static struct pxafb_mach_info sharp_lq03

+*** 299,304 ****

+--- 284,330 ----

+  	.lccr3			= 0x04400007,

+  	.pxafb_backlight_power	= lpd270_backlight_power,

+  };

++ #endif

++ 

++ #ifdef CONFIG_FB_PXA_LPD_LQ057Q3DC02

++ /* 5.7" TFT QVGA (LoLo display number 1) */ 

++ static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {

++ 	.pixclock		= 100000,

++ 	.xres			= 240,

++ 	.yres			= 320,

++ 	.bpp			= 16,

++ 	.hsync_len		= 64,

++ 	.left_margin		= 0x27,

++ 	.right_margin		= 0x09,

++ 	.vsync_len		= 0x04,

++ 	.upper_margin		= 0x08,

++ 	.lower_margin		= 0x14,

++ 	.sync			= 0,

++ 	.lccr0			= 0x07800080,

++ 	.lccr3			= 0x04400007,

++ 	.pxafb_backlight_power	= lpd270_backlight_power,

++ };

++ #endif

++ 

++ #ifdef CONFIG_FB_PXA_LPD_LQ10D368

++ /* 10.4" TFT QVGA (LoLo display number 7) */ 

++ static struct pxafb_mach_info sharp_lq10d368 __initdata = {

++ 	.pixclock		= 25000,

++ 	.xres			= 640,

++ 	.yres			= 480,

++ 	.bpp			= 16,

++ 	.hsync_len		= 0x31,

++ 	.left_margin		= 0x89,

++ 	.right_margin		= 0x19,

++ 	.vsync_len		= 0x12,

++ 	.upper_margin		= 0x22,

++ 	.lower_margin		= 0x00,

++ 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,

++ 	.lccr0			= 0x078000f8,

++ 	.lccr3			= 0x04400001,

++ 	.pxafb_backlight_power	= lpd270_backlight_power,

++ };

++ #endif

+  

+  static struct platform_device *platform_devices[] __initdata = {

+  	&smc91x_device,

+*************** static void __init lpd270_init(void)

+*** 345,353 ****

+  

+  	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

+  

+! 	// set_pxa_fb_info(&sharp_lq057q3dc02);

+  	set_pxa_fb_info(&sharp_lq64d343);

+! 	// set_pxa_fb_info(&sharp_lq035q7db02_20);

+  

+  	pxa_set_ohci_info(&lpd270_ohci_platform_data);

+  }

+--- 371,387 ----

+  

+  	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));

+  

+! #ifdef CONFIG_FB_PXA_LPD_LQ64D343

+  	set_pxa_fb_info(&sharp_lq64d343);

+! #elif defined(CONFIG_FB_PXA_LPD_LQ045Q7DB02)

+! 	set_pxa_fb_info(&sharp_lq035q7db02_20);

+! #elif defined(CONFIG_FB_PXA_LPD_LQ057Q3DC02)

+! 	set_pxa_fb_info(&sharp_lq057q3dc02);

+! #elif defined(CONFIG_FB_PXA_LPD_LQ10D368)

+! 	set_pxa_fb_info(&sharp_lq10d368);

+! #elif defined(CONFIG_FB_PXA)

+! 	printk("No Logic LCD panel selected!");

+! #endif

+  

+  	pxa_set_ohci_info(&lpd270_ohci_platform_data);

+  }

+Index: drivers/block/Kconfig

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/drivers/block/Kconfig,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** drivers/block/Kconfig	29 May 2006 00:55:20 -0000	1.1.1.1

+--- drivers/block/Kconfig	1 Jun 2006 17:05:41 -0000	1.2

+***************

+*** 4,9 ****

+--- 4,16 ----

+  

+  menu "Block devices"

+  

++ config BLK_DEV_LOGICPD_CF

++        bool "LogicPD memory-mapped CompactFlash card support"

++        depends on MACH_LOGICPD_PXA270

++        ---help---

++          If you want to use the memory-mapped comapct flash card on

++          the LogicPD SDK, say Y.

++ 

+  config BLK_DEV_FD

+  	tristate "Normal floppy disk support"

+  	depends on ARCH_MAY_HAVE_PC_FDC

+Index: drivers/block/Makefile

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/drivers/block/Makefile,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** drivers/block/Makefile	29 May 2006 00:55:20 -0000	1.1.1.1

+--- drivers/block/Makefile	1 Jun 2006 17:05:59 -0000	1.2

+***************

+*** 5,10 ****

+--- 5,12 ----

+  # Rewritten to use lists instead of if-statements.

+  # 

+  

++ obj-$(CONFIG_BLK_DEV_LOGICPD_CF)+= lpd270-cf.o

++ 

+  obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o

+  obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o

+  obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o

+Index: drivers/block/lpd270-cf.c

+===================================================================

+RCS file: drivers/block/lpd270-cf.c

+diff -N drivers/block/lpd270-cf.c

+*** /dev/null	1 Jan 1970 00:00:00 -0000

+--- drivers/block/lpd270-cf.c	1 Jun 2006 16:23:35 -0000	1.1

+***************

+*** 0 ****

+--- 1,675 ----

++ /*

++  * Support for LogicPD SDK Memory-mapped CompactFlash interface

++  *

++  * Copyright 2006 Logic Product Development <peterb@logicpd.com>

++  *

++  * This file is subject to the terms and conditions of the GNU General Public

++  * License.  See the file COPYING in the main directory of this archive

++  * for more details.

++  */

++ 

++ 

++ /* Uncomment the following if you want verbose error reports. */

++ /* #define VERBOSE_ERRORS */

++ 

++ #include <linux/blkdev.h>

++ #include <linux/errno.h>

++ #include <linux/signal.h>

++ #include <linux/interrupt.h>

++ #include <linux/timer.h>

++ #include <linux/fs.h>

++ #include <linux/kernel.h>

++ #include <linux/genhd.h>

++ #include <linux/slab.h>

++ #include <linux/string.h>

++ #include <linux/ioport.h>

++ #include <linux/mc146818rtc.h> /* CMOS defines */

++ #include <linux/init.h>

++ #include <linux/blkpg.h>

++ #include <linux/hdreg.h>

++ 

++ #define REALLY_SLOW_IO

++ #include <asm/system.h>

++ #include <asm/io.h>

++ #include <asm/uaccess.h>

++ #include <asm/delay.h>

++ 

++ #ifdef __arm__

++ #undef  HD_IRQ

++ #endif

++ #include <asm/irq.h>

++ #ifdef __arm__

++ #define HD_IRQ IRQ_HARDDISK

++ #endif

++ 

++ #define DEBUG

++ 

++ /* Hd controller regster ports */

++ 

++ #define HD_DATA		0x1f0		/* _CTL when writing */

++ #define HD_ERROR	0x1f1		/* see err-bits */

++ #define HD_NSECTOR	0x1f2		/* nr of sectors to read/write */

++ #define HD_SECTOR	0x1f3		/* starting sector */

++ #define HD_LCYL		0x1f4		/* starting cylinder */

++ #define HD_HCYL		0x1f5		/* high byte of starting cyl */

++ #define HD_CURENT	0x1f6		/* 101dhhhh , d=drive, hhhh=head */

++ #define HD_STATUS	0x1f7		/* see status-bits */

++ #define HD_FEATURE	HD_ERROR	/* same io address, read=error, write=feature */

++ #define HD_PRECOMP	HD_FEATURE	/* obsolete use of this port - predates IDE */

++ #define HD_COMMAND	HD_STATUS	/* same io address, read=status, write=cmd */

++ 

++ #define HD_CMD		0x3f6		/* used for resets */

++ #define HD_ALTSTATUS	0x3f6		/* same as HD_STATUS but doesn't clear irq */

++ 

++ /* Bits of HD_STATUS */

++ #define ERR_STAT		0x01

++ #define INDEX_STAT		0x02

++ #define ECC_STAT		0x04	/* Corrected error */

++ #define DRQ_STAT		0x08

++ #define SEEK_STAT		0x10

++ #define SERVICE_STAT		SEEK_STAT

++ #define WRERR_STAT		0x20

++ #define READY_STAT		0x40

++ #define BUSY_STAT		0x80

++ 

++ /* Bits for HD_ERROR */

++ #define MARK_ERR		0x01	/* Bad address mark */

++ #define TRK0_ERR		0x02	/* couldn't find track 0 */

++ #define ABRT_ERR		0x04	/* Command aborted */

++ #define MCR_ERR			0x08	/* media change request */

++ #define ID_ERR			0x10	/* ID field not found */

++ #define MC_ERR			0x20	/* media changed */

++ #define ECC_ERR			0x40	/* Uncorrectable ECC error */

++ #define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */

++ #define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */

++ 

++ static DEFINE_SPINLOCK(hd_lock);

++ static struct request_queue *hd_queue;

++ 

++ #define MAJOR_NR HD_MAJOR

++ #define QUEUE (hd_queue)

++ #define CURRENT elv_next_request(hd_queue)

++ 

++ #define TIMEOUT_VALUE	(6*HZ)

++ #define	HD_DELAY	0

++ 

++ #define MAX_ERRORS     16	/* Max read/write errors/sector */

++ #define RESET_FREQ      8	/* Reset controller every 8th retry */

++ #define RECAL_FREQ      4	/* Recalibrate every 4th retry */

++ #define MAX_HD		2

++ 

++ #define STAT_OK		(READY_STAT|SEEK_STAT)

++ #define OK_STATUS(s)	(((s)&(STAT_OK|(BUSY_STAT|WRERR_STAT|ERR_STAT)))==STAT_OK)

++ 

++ static int driveno = 0;

++ static int debug = 0;

++ 

++ // Start of CF registers

++ #define CPLD_ATA_REG_BASE 0x14001800

++ static unsigned char *reg_base;

++ 

++ static inline unsigned int read_reg(unsigned char *base, unsigned int reg)

++ {

++   volatile unsigned short val;

++ 

++   if (reg & 1)

++ 	val = *((volatile unsigned short *)(base + reg - 1)) >> 8;

++   else

++ 	val = *((volatile unsigned short *)(base + reg));

++ 

++   if (debug)

++ 	printk("%s: %02x %04x \n", __FUNCTION__, reg, val);

++ 

++   return val;

++ }

++ 

++ static inline void write_reg(unsigned char *base, unsigned int reg, unsigned int val)

++ {

++   if (debug)

++ 	printk("%s: %02x %04x\n", __FUNCTION__, reg, val);

++   if (reg & 1)

++ 	*((volatile unsigned short *)(base + reg - 1)) = (val << 8);

++   else

++ 	*((volatile unsigned short *)(base + reg)) = val;

++ }

++ 

++ #define CB_DATA		0x08

++ #define CB_ERR		0x0d

++ #define CB_SC_SN	0x02

++ #define CB_CYL		0x04

++ #define CB_STAT		0x07

++ #define CB_DH_CMD	0x06

++ #define CB_ASTAT	0x0e

++ #define CB_DC		0x0e

++ #define CB_DA		0x0f

++ 

++ #define CB_STAT_BSY 0x80

++ #define CB_STAT_DRQ 0x08

++ #define CB_STAT_SEEK 0x10

++ #define CB_STAT_DF 0x20

++ #define CB_STAT_READY 0x40

++ #define CB_STAT_ERR 0x01

++ #define CB_DC_HD15 0x08

++ #define CB_DC_NIEN 0x02

++ 

++ #define CMD_IDENTIFY_DEVICE 0xec

++ #define CMD_READ_SECTORS 0x20

++ #define CMD_WRITE_SECTORS 0x30

++ 

++ #define TIMEOUT 0x800000

++ 

++ int cfide_card_present(void)

++ {

++   unsigned char data, data1, data2;

++ 

++   /* Flip Sector Count */

++   data = read_reg(reg_base, CB_SC_SN);

++   data1 = (~data) & 0xff;

++   write_reg(reg_base, CB_SC_SN, data1);

++ 

++   /* write to the data register to waggle the bus */

++   write_reg(reg_base, CB_DATA, data);

++ 

++   /* Read back the sector count and if it matches what we put there

++ 	 then the CF is present */

++   data2 = read_reg(reg_base, CB_SC_SN);

++   if (data2 == data1)

++ 	return 1;

++   else {

++ 	printk("data %02x data1 %02x data2 %02x\n", data, data1, data2);

++ 	return 0;

++   }

++ }

++ 

++ /*

++  *  This struct defines the HD's and their types.

++  */

++ struct hd_i_struct {

++ 	unsigned int head,sect,cyl,wpcom,lzone,ctl;

++ 	int unit;

++ 	int recalibrate;

++ 	int special_op;

++ };

++ 	

++ #ifdef HD_TYPE

++ static struct hd_i_struct hd_info[] = { HD_TYPE };

++ static int NR_HD = ((sizeof (hd_info))/(sizeof (struct hd_i_struct)));

++ #else

++ static struct hd_i_struct hd_info[MAX_HD];

++ static int NR_HD;

++ #endif

++ 

++ static struct gendisk *hd_gendisk[MAX_HD];

++ 

++ 

++ 

++ #if (HD_DELAY > 0)

++ 

++ #include <asm/i8253.h>

++ 

++ unsigned long last_req;

++ 

++ unsigned long read_timer(void)

++ {

++ 	unsigned long t, flags;

++ 	int i;

++ 

++ 	spin_lock_irqsave(&i8253_lock, flags);

++ 	t = jiffies * 11932;

++     	outb_p(0, 0x43);

++ 	i = inb_p(0x40);

++ 	i |= inb(0x40) << 8;

++ 	spin_unlock_irqrestore(&i8253_lock, flags);

++ 	return(t - i);

++ }

++ #endif

++ 

++ static void __init hd_setup(char *str, int *ints)

++ {

++ 	int hdind = 0;

++ 

++ 	if (ints[0] != 3)

++ 		return;

++ 	if (hd_info[0].head != 0)

++ 		hdind=1;

++ 	hd_info[hdind].head = ints[2];

++ 	hd_info[hdind].sect = ints[3];

++ 	hd_info[hdind].cyl = ints[1];

++ 	hd_info[hdind].wpcom = 0;

++ 	hd_info[hdind].lzone = ints[1];

++ 	hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);

++ 	NR_HD = hdind+1;

++ }

++ 

++ 

++ 

++ void cfide_wait_fin(void)

++ {

++   unsigned long timer;

++ 

++   // printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 

++   udelay(500);  // wait 500us

++ 

++   for (timer = 0;

++ 	   timer < TIMEOUT && (read_reg(reg_base, CB_STAT) & CB_STAT_BSY); ++timer)

++ 	yield();

++ 

++   if (timer == TIMEOUT)

++ 	printk("%s:%d\n", __FUNCTION__, __LINE__);

++ }

++ 

++ void cfide_wait_drq(void)

++ {

++   unsigned long timer;

++ 

++   for (timer = 0;

++ 	   timer < TIMEOUT && !(read_reg(reg_base, CB_STAT) & CB_STAT_DRQ); ++timer)

++ 	yield();

++ 

++   if (timer == TIMEOUT)

++ 	printk("%s:%d\n", __FUNCTION__, __LINE__);

++ }

++ 

++ static union {

++   struct hd_driveid id;

++   short sh[512/2];

++ } info_buf;

++ 

++ 

++ /* Read cnt sectors from the flash, starting at lba, storing the data

++    at dest */

++ static int cfide_read_sectors(uint8_t *dest, uint32_t lba, uint32_t cnt)

++ {

++   uint8_t sect, head, devHead, status, devCtrl;

++   uint16_t cyl;

++   uint32_t orig_lba = lba;

++   uint32_t i,j;

++   uint16_t data;

++ 

++   // printk("%s: dest %p lba %u cnt %u\n", __FUNCTION__, dest, lba, cnt);

++ 

++   if (lba + cnt > info_buf.id.lba_capacity) {

++ 	printk("%s: %u+%u is larger than %u\n", __FUNCTION__, lba, cnt, info_buf.id.lba_capacity);

++ 	return -EINVAL;

++   }

++ 

++   if (cnt > 255) {

++ 	printk("%s: cnt %u is too large\n", __FUNCTION__, cnt);

++ 	return -EINVAL;

++   }

++ 

++ 

++   /* translate from LBA */

++   sect = lba & 0xff;

++   lba >>= 8;

++   cyl = lba & 0xffff;

++   lba >>= 16;

++   head = (lba & 0x0f) | 0x40;

++ 

++   devCtrl = CB_DC_HD15 | CB_DC_NIEN;

++   devHead = driveno | head;

++ 

++   write_reg(reg_base, CB_DC, devCtrl);

++   write_reg(reg_base, CB_SC_SN, ((uint16_t)cnt & 0xff) | ((uint16_t)sect << 8));

++   write_reg(reg_base, CB_CYL, cyl);

++ 

++   write_reg(reg_base, CB_DH_CMD, devHead | (CMD_READ_SECTORS << 8));

++ 

++   for (j=0; j<cnt; ++j) {

++ 	udelay(1);  // spin for a moment to let the controller raise BSY

++ 

++ 	cfide_wait_fin();

++ 	cfide_wait_drq();

++ 	for (i=0; i<256; ++i) {

++ 	  data = read_reg(reg_base, CB_DATA);

++ #if 0

++ 	  *dest++ = data>>8;

++ 	  *dest++ = data;

++ #else

++ 	  *dest++ = data;

++ 	  *dest++ = data>>8;

++ #endif

++ 	}

++ 

++ 

++ 	cfide_wait_fin();

++ 

++ 	status = read_reg(reg_base, CB_STAT);

++ 	if (status & (CB_STAT_DF|CB_STAT_ERR)) {

++ 	  printk("%s: error at block %d status %#x\n", __FUNCTION__, orig_lba+j, status);

++ 	  break;

++ 	}

++ 

++   }

++ 

++   return 0;

++ }

++ 

++ /* Write cnt sectors to the flash, starting at lba, reading the data

++    from src */

++ static int cfide_write_sectors(uint8_t *src, uint32_t lba, uint32_t cnt)

++ {

++   uint8_t sect, head, devHead, status, devCtrl;

++   uint16_t cyl;

++   uint32_t orig_lba = lba;

++   uint32_t i,j;

++   uint16_t data;

++ 

++   if (lba + cnt > info_buf.id.lba_capacity) {

++ 	printk("%s: %u+%u is larger than %u\n", __FUNCTION__, lba, cnt, info_buf.id.lba_capacity);

++ 	return -EINVAL;

++   }

++ 

++   if (cnt > 255) {

++ 	printk("%s: cnt %u is too large\n", __FUNCTION__, cnt);

++ 	return -EINVAL;

++   }

++ 

++   /* translate from LBA */

++   sect = lba & 0xff;

++   lba >>= 8;

++   cyl = lba & 0xffff;

++   lba >>= 16;

++   head = (lba & 0x0f) | 0x40;

++ 

++   devCtrl = CB_DC_HD15 | CB_DC_NIEN;

++   devHead = driveno | head;

++ 

++   write_reg(reg_base, CB_DC, devCtrl);

++   write_reg(reg_base, CB_SC_SN, ((uint16_t)cnt & 0xff) | ((uint16_t)sect << 8));

++   write_reg(reg_base, CB_CYL, cyl);

++ 

++   write_reg(reg_base, CB_DH_CMD, devHead | (CMD_WRITE_SECTORS << 8));

++ 

++   for (j=0; j<cnt; ++j) {

++ 	udelay(1);  // spin for a moment to let the controller raise BSY

++ 

++ 	cfide_wait_fin();

++ 

++ 	cfide_wait_drq();

++ 

++ 	for (i=0; i<256; ++i) {

++ #if 0

++ 	  data = (*src++ << 8);

++ 	  data |= *src++;

++ #else

++ 	  data = *src++;

++ 	  data |= (*src++ << 8);

++ #endif

++ 	  write_reg(reg_base, CB_DATA, data);

++ 	}

++ 	

++ 	cfide_wait_fin();

++ 

++ 	status = read_reg(reg_base, CB_STAT);

++ 	if (status & (CB_STAT_DF|CB_STAT_ERR)) {

++ 	  printk("%s: error at block %d status %#x\n", __FUNCTION__, orig_lba+j, status);

++ 	  break;

++ 	}

++ 

++   }

++   return 0;

++ }

++ 

++ 

++ static void cfide_transfer(unsigned long sector,

++         unsigned long nsect, char *buffer, int write)

++ {

++   int ret;

++     if (write)

++ 	  ret = cfide_write_sectors(buffer, sector, nsect);

++ 	else

++ 	  ret = cfide_read_sectors(buffer, sector, nsect);

++ 	if (ret)

++ 	  printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 	  

++ }

++ 

++ 

++ static void do_hd_request (request_queue_t * q)

++ {

++   struct request *req;

++ 

++   // printk("%s:%d q %p\n", __FUNCTION__, __LINE__, q);

++ 

++   while ((req = elv_next_request(q)) != NULL) {

++     if (blk_fs_request(req)) {

++ 	  cfide_transfer(req->sector, req->current_nr_sectors,

++ 					 req->buffer, rq_data_dir(req));

++ 	  end_request(req, 1);

++ 	} else {

++ 	  printk (KERN_NOTICE "Skip non-fs request\n");

++ 	  end_request(req, 0);

++ 	  continue;

++ 	}

++   }

++ }

++ 

++ static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)

++ {

++ 	struct hd_i_struct *disk = bdev->bd_disk->private_data;

++ 

++ 	geo->heads = disk->head;

++ 	geo->sectors = disk->sect;

++ 	geo->cylinders = disk->cyl;

++ 	return 0;

++ }

++ 

++ 

++ static struct block_device_operations hd_fops = {

++ 	.getgeo =	hd_getgeo,

++ };

++ 

++ void cfide_fetch_info(void)

++ {

++   int i;

++ 

++   // printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 

++   /* Select the drive and wait for it to finish */

++   driveno &= 1;

++   write_reg(reg_base, CB_DH_CMD, driveno);

++   cfide_wait_fin();

++ 

++   // printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 

++   write_reg(reg_base, CB_DH_CMD, driveno | (CMD_IDENTIFY_DEVICE << 8));

++   cfide_wait_fin();

++ 

++   // printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 

++ 

++   cfide_wait_drq();

++ 

++   // printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 

++   for (i=0; i<512; i+=2)

++ 	info_buf.sh[i/2] = read_reg(reg_base, CB_DATA);

++ 

++   /* Fix lba_capcity */

++   info_buf.id.lba_capacity = (info_buf.id.lba_capacity>>16) | (info_buf.id.lba_capacity<<16);

++   // printk("%s:%d lba_capacity %#x\n", __FUNCTION__, __LINE__, info_buf.id.lba_capacity);

++ }

++ 

++ /*

++  * This is the hard disk IRQ description. The SA_INTERRUPT in sa_flags

++  * means we run the IRQ-handler with interrupts disabled:  this is bad for

++  * interrupt latency, but anything else has led to problems on some

++  * machines.

++  *

++  * We enable interrupts in some of the routines after making sure it's

++  * safe.

++  */

++ 

++ static int __init hd_init(void)

++ {

++ 	int drive;

++ 

++ 	printk("%s:%d MAJOR_NR %d\n", __FUNCTION__, __LINE__, MAJOR_NR);

++ 

++ 	if (register_blkdev(MAJOR_NR,"hd"))

++ 		return -1;

++ 

++ 	reg_base = (unsigned char *) ioremap_nocache(CPLD_ATA_REG_BASE, 0x1000);

++ 	if (!reg_base) {

++ 	  printk("%s:%d\n", __FUNCTION__, __LINE__);

++ 	  return -ENOMEM;

++ 	}

++ 

++ 	/* If no card present, return */

++ 	if (!cfide_card_present()) {

++ 	  printk("No CompactFlash card detected\n");

++ 	  iounmap(reg_base);

++ 	  return 0;

++ 	}

++ 

++ 	/* Fetchthe device info */

++ 	cfide_fetch_info();

++ 

++ 	hd_queue = blk_init_queue(do_hd_request, &hd_lock);

++ 	printk("%s:%d hd_queue %p\n", __FUNCTION__, __LINE__, hd_queue);

++ 	if (!hd_queue) {

++ 		unregister_blkdev(MAJOR_NR,"hd");

++ 		return -ENOMEM;

++ 	}

++ 

++ 

++ 	blk_queue_max_sectors(hd_queue, 255);

++ 	blk_queue_hardsect_size(hd_queue, 512);

++ 

++ #if 1

++ 	hd_info[0].cyl = info_buf.id.cyls;

++ 	hd_info[0].head = info_buf.id.heads;

++ 	hd_info[0].wpcom = 0;

++ 	hd_info[0].ctl = 0;

++ 	hd_info[0].lzone = 0;

++ 	hd_info[0].sect = info_buf.id.sectors;

++ 	NR_HD++;

++ 

++ 	printk("%s:%d NR_HD %d\n", __FUNCTION__, __LINE__, NR_HD);

++ 

++ #else

++ #ifdef __i386__

++ 	if (!NR_HD) {

++ 		extern struct drive_info drive_info;

++ 		unsigned char *BIOS = (unsigned char *) &drive_info;

++ 		unsigned long flags;

++ 		int cmos_disks;

++ 

++ 		for (drive=0 ; drive<2 ; drive++) {

++ 			hd_info[drive].cyl = *(unsigned short *) BIOS;

++ 			hd_info[drive].head = *(2+BIOS);

++ 			hd_info[drive].wpcom = *(unsigned short *) (5+BIOS);

++ 			hd_info[drive].ctl = *(8+BIOS);

++ 			hd_info[drive].lzone = *(unsigned short *) (12+BIOS);

++ 			hd_info[drive].sect = *(14+BIOS);

++ #ifdef does_not_work_for_everybody_with_scsi_but_helps_ibm_vp

++ 			if (hd_info[drive].cyl && NR_HD == drive)

++ 				NR_HD++;

++ #endif

++ 			BIOS += 16;

++ 		}

++ 

++ 	/*

++ 		We query CMOS about hard disks : it could be that 

++ 		we have a SCSI/ESDI/etc controller that is BIOS

++ 		compatible with ST-506, and thus showing up in our

++ 		BIOS table, but not register compatible, and therefore

++ 		not present in CMOS.

++ 

++ 		Furthermore, we will assume that our ST-506 drives

++ 		<if any> are the primary drives in the system, and 

++ 		the ones reflected as drive 1 or 2.

++ 

++ 		The first drive is stored in the high nibble of CMOS

++ 		byte 0x12, the second in the low nibble.  This will be

++ 		either a 4 bit drive type or 0xf indicating use byte 0x19 

++ 		for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS.

++ 

++ 		Needless to say, a non-zero value means we have 

++ 		an AT controller hard disk for that drive.

++ 

++ 		Currently the rtc_lock is a bit academic since this

++ 		driver is non-modular, but someday... ?         Paul G.

++ 	*/

++ 

++ 		spin_lock_irqsave(&rtc_lock, flags);

++ 		cmos_disks = CMOS_READ(0x12);

++ 		spin_unlock_irqrestore(&rtc_lock, flags);

++ 

++ 		if (cmos_disks & 0xf0) {

++ 			if (cmos_disks & 0x0f)

++ 				NR_HD = 2;

++ 			else

++ 				NR_HD = 1;

++ 		}

++ 	}

++ #endif /* __i386__ */

++ #ifdef __arm__

++ 	if (!NR_HD) {

++ 		/* We don't know anything about the drive.  This means

++ 		 * that you *MUST* specify the drive parameters to the

++ 		 * kernel yourself.

++ 		 */

++ 		printk("hd: no drives specified - use hd=cyl,head,sectors"

++ 			" on kernel command line\n");

++ 	}

++ #endif

++ #endif

++ 	if (!NR_HD)

++ 		goto out;

++ 

++ 	for (drive=0 ; drive < NR_HD ; drive++) {

++ 		struct gendisk *disk = alloc_disk(64);

++ 		struct hd_i_struct *p = &hd_info[drive];

++ 		if (!disk)

++ 			goto Enomem;

++ 		disk->major = MAJOR_NR;

++ 		disk->first_minor = drive << 6;

++ 		disk->fops = &hd_fops;

++ 		sprintf(disk->disk_name, "hd%c", 'a'+drive);

++ 		disk->private_data = p;

++ 		set_capacity(disk, p->head * p->sect * p->cyl);

++ 		disk->queue = hd_queue;

++ 		p->unit = drive;

++ 		hd_gendisk[drive] = disk;

++ 		printk ("%s: %luMB, CHS=%d/%d/%d\n",

++ 			disk->disk_name, (unsigned long)get_capacity(disk)/2048,

++ 			p->cyl, p->head, p->sect);

++ 	}

++ 

++ 	/* Let them fly */

++ 	for(drive=0; drive < NR_HD; drive++)

++ 		add_disk(hd_gendisk[drive]);

++ 

++ 	return 0;

++ 

++ out:

++ 	unregister_blkdev(MAJOR_NR,"hd");

++ 	blk_cleanup_queue(hd_queue);

++ 	return -1;

++ Enomem:

++ 	while (drive--)

++ 		put_disk(hd_gendisk[drive]);

++ 	goto out;

++ }

++ 

++ static int __init parse_hd_setup (char *line) {

++ 	int ints[6];

++ 

++ 	(void) get_options(line, ARRAY_SIZE(ints), ints);

++ 	hd_setup(NULL, ints);

++ 

++ 	return 1;

++ }

++ __setup("hd=", parse_hd_setup);

++ 

++ module_init(hd_init);

++ 

++ /*

++  * Local variables:

++  *  c-indent-level: 4

++  *  tab-width: 4

++  * End:

++  */

+Index: drivers/mtd/maps/Kconfig

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/drivers/mtd/maps/Kconfig,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** drivers/mtd/maps/Kconfig	29 May 2006 00:58:44 -0000	1.1.1.1

+--- drivers/mtd/maps/Kconfig	30 May 2006 13:04:33 -0000	1.2

+*************** config MTD_MAINSTONE

+*** 137,142 ****

+--- 137,149 ----

+  	  This provides a driver for the on-board flash of the Intel

+  	  'Mainstone PXA27x evaluation board.

+  

++ config MTD_LOGICPD_PXA270

++ 	tristate "CFI Flash device mapped on LogicPD PXA270 Card Engine"

++ 	depends on MACH_LOGICPD_PXA270 && MTD_CFI_INTELEXT && MTD_PARTITIONS

++ 	help

++ 	  This provides a driver for the on-board flash of the LogicPD

++ 	  PXA270 Card Engine.

++ 

+  config MTD_OCTAGON

+  	tristate "JEDEC Flash device mapped on Octagon 5066 SBC"

+  	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS

+Index: drivers/mtd/maps/Makefile

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/drivers/mtd/maps/Makefile,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** drivers/mtd/maps/Makefile	29 May 2006 00:58:44 -0000	1.1.1.1

+--- drivers/mtd/maps/Makefile	30 May 2006 13:04:33 -0000	1.2

+*************** obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o

+*** 22,27 ****

+--- 22,28 ----

+  obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o

+  obj-$(CONFIG_MTD_LUBBOCK)	+= lubbock-flash.o

+  obj-$(CONFIG_MTD_MAINSTONE)	+= mainstone-flash.o

++ obj-$(CONFIG_MTD_LOGICPD_PXA270)+= lpd270-flash.o

+  obj-$(CONFIG_MTD_MBX860)	+= mbx860.o

+  obj-$(CONFIG_MTD_CEIVA)		+= ceiva.o

+  obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o

+Index: drivers/mtd/maps/lpd270-flash.c

+===================================================================

+RCS file: drivers/mtd/maps/lpd270-flash.c

+diff -N drivers/mtd/maps/lpd270-flash.c

+*** /dev/null	1 Jan 1970 00:00:00 -0000

+--- drivers/mtd/maps/lpd270-flash.c	30 May 2006 13:03:55 -0000	1.1

+***************

+*** 0 ****

+--- 1,197 ----

++ /*

++  * $Id: lpd270-flash.c,v 1.1 2006/05/30 13:03:55 LOGIC+peterb Exp $

++  *

++  * Map driver for the Lpd270 developer platform.

++  *

++  * Author:	Nicolas Pitre

++  * Copyright:	(C) 2001 MontaVista Software Inc.

++  *

++  * This program is free software; you can redistribute it and/or modify

++  * it under the terms of the GNU General Public License version 2 as

++  * published by the Free Software Foundation.

++  */

++ 

++ #include <linux/module.h>

++ #include <linux/types.h>

++ #include <linux/kernel.h>

++ #include <linux/init.h>

++ #include <linux/dma-mapping.h>

++ #include <linux/slab.h>

++ 

++ #include <linux/mtd/mtd.h>

++ #include <linux/mtd/map.h>

++ #include <linux/mtd/partitions.h>

++ 

++ #include <asm/io.h>

++ #include <asm/hardware.h>

++ #include <asm/arch/pxa-regs.h>

++ // #include <asm/arch/lpd270.h>

++ 

++ 

++ #define ROM_ADDR	0x00000000

++ #define FLASH_ADDR	0x04000000

++ 

++ #define WINDOW_SIZE 	0x04000000

++ 

++ static void lpd270_map_inval_cache(struct map_info *map, unsigned long from,

++ 				      ssize_t len)

++ {

++ 	consistent_sync((char *)map->cached + from, len, DMA_FROM_DEVICE);

++ }

++ 

++ static struct map_info lpd270_maps[2] = { {

++ 	.size =		WINDOW_SIZE,

++ 	.phys =		PXA_CS0_PHYS,

++ 	.inval_cache = 	lpd270_map_inval_cache,

++ }, {

++ 	.size =		WINDOW_SIZE,

++ 	.phys =		PXA_CS1_PHYS,

++ 	.inval_cache = 	lpd270_map_inval_cache,

++ } };

++ 

++ static struct mtd_partition lpd270_partitions[] = {

++ 	{

++ 		.name =		"Bootloader",

++ 		.size =		0x000C0000,

++ 		.offset =	0,

++ 		.mask_flags =	MTD_WRITEABLE  /* force read-only */

++ 	},{

++ 		.name =		"YAFFS",

++ 		.size =		0x00F40000,

++ 		.offset =	0x000C0000,

++ 	},{

++ 		.name =		"Filesystem",

++ 		.size =		MTDPART_SIZ_FULL,

++ 		.offset =	0x01000000

++ 	}

++ };

++ 

++ static struct mtd_info *mymtds[2];

++ static struct mtd_partition *parsed_parts[2];

++ static int nr_parsed_parts[2];

++ 

++ static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };

++ 

++ static int __init init_lpd270(void)

++ {

++ 	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */

++ 	int ret = 0, i;

++ 

++ 	lpd270_maps[0].bankwidth = (BOOT_DEF & 1) ? 2 : 4;

++ 	lpd270_maps[1].bankwidth = 4;

++ 

++ 	/* Compensate for SW7 which swaps the flash banks */

++ 	lpd270_maps[SW7].name = "processor flash";

++ 	lpd270_maps[SW7 ^ 1].name = "main board flash";

++ 

++ 	printk(KERN_NOTICE "Lpd270 configured to boot from %s\n",

++ 	       lpd270_maps[0].name);

++ 

++ 	// Set VPP in CPLD to allow writes to the flash

++ 	{

++ 	  unsigned short *p;

++ 

++ 	  p = ioremap(0x08000000, PAGE_SIZE);

++ 	  if (!p) {

++ 	    printk("%s:%d ioremap failed\n", __FUNCTION__, __LINE__);

++ 	  } else {

++ 	    printk("%s:%d CTRL REG %04x\n", __FUNCTION__, __LINE__, *p);

++ 	    *p |= (1<<3); // FL_VPEN

++ 	    iounmap(p);

++ 	  }

++ 	}

++ 

++ 	for (i = 0; i < 2; i++) {

++ 		lpd270_maps[i].virt = ioremap_nocache(lpd270_maps[i].phys,

++ 						 WINDOW_SIZE);

++ 		if (!lpd270_maps[i].virt) {

++ 			printk(KERN_WARNING "Failed to ioremap %s\n",

++ 			       lpd270_maps[i].name);

++ 			if (!ret)

++ 				ret = -ENOMEM;

++ 			continue;

++ 		}

++ #if 0

++ 		lpd270_maps[i].cached =

++ 			ioremap_cached(lpd270_maps[i].phys, WINDOW_SIZE);

++ 		if (!lpd270_maps[i].cached)

++ 			printk(KERN_WARNING "Failed to ioremap cached %s\n",

++ 			       lpd270_maps[i].name);

++ #endif

++ 		simple_map_init(&lpd270_maps[i]);

++ 

++ 		printk(KERN_NOTICE

++ 		       "Probing %s at physical address 0x%08lx"

++ 		       " (%d-bit bankwidth)\n",

++ 		       lpd270_maps[i].name, lpd270_maps[i].phys,

++ 		       lpd270_maps[i].bankwidth * 8);

++ 

++ 		mymtds[i] = do_map_probe("cfi_probe", &lpd270_maps[i]);

++ 

++ 		if (!mymtds[i]) {

++ 			iounmap((void *)lpd270_maps[i].virt);

++ 			if (lpd270_maps[i].cached)

++ 				iounmap(lpd270_maps[i].cached);

++ 			if (!ret)

++ 				ret = -EIO;

++ 			continue;

++ 		}

++ 		mymtds[i]->owner = THIS_MODULE;

++ 

++ 		ret = parse_mtd_partitions(mymtds[i], probes,

++ 					   &parsed_parts[i], 0);

++ 

++ 		if (ret > 0)

++ 			nr_parsed_parts[i] = ret;

++ 	}

++ 

++ 	if (!mymtds[0] && !mymtds[1])

++ 		return ret;

++ 

++ 	for (i = 0; i < 2; i++) {

++ 		if (!mymtds[i]) {

++ 			printk(KERN_WARNING "%s is absent. Skipping\n",

++ 			       lpd270_maps[i].name);

++ 		} else if (nr_parsed_parts[i]) {

++ 			add_mtd_partitions(mymtds[i], parsed_parts[i],

++ 					   nr_parsed_parts[i]);

++ 		} else if (!i) {

++ 			printk("Using static partitions on %s\n",

++ 			       lpd270_maps[i].name);

++ 			add_mtd_partitions(mymtds[i], lpd270_partitions,

++ 					   ARRAY_SIZE(lpd270_partitions));

++ 		} else {

++ 			printk("Registering %s as whole device\n",

++ 			       lpd270_maps[i].name);

++ 			add_mtd_device(mymtds[i]);

++ 		}

++ 	}

++ 	return 0;

++ }

++ 

++ static void __exit cleanup_lpd270(void)

++ {

++ 	int i;

++ 	for (i = 0; i < 2; i++) {

++ 		if (!mymtds[i])

++ 			continue;

++ 

++ 		if (nr_parsed_parts[i] || !i)

++ 			del_mtd_partitions(mymtds[i]);

++ 		else

++ 			del_mtd_device(mymtds[i]);

++ 

++ 		map_destroy(mymtds[i]);

++ 		iounmap((void *)lpd270_maps[i].virt);

++ 		if (lpd270_maps[i].cached)

++ 			iounmap(lpd270_maps[i].cached);

++ 		kfree(parsed_parts[i]);

++ 	}

++ }

++ 

++ module_init(init_lpd270);

++ module_exit(cleanup_lpd270);

++ 

++ MODULE_LICENSE("GPL");

++ MODULE_AUTHOR("Nicolas Pitre <nico@cam.org>");

++ MODULE_DESCRIPTION("MTD map driver for Logic PXA270");

+Index: drivers/net/smc91x.h

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/drivers/net/smc91x.h,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** drivers/net/smc91x.h	29 May 2006 00:59:41 -0000	1.1.1.1

+--- drivers/net/smc91x.h	29 May 2006 17:42:44 -0000	1.2

+***************

+*** 129,134 ****

+--- 129,152 ----

+  #define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))

+  #define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))

+  

++ #elif	defined(CONFIG_MACH_LOGICPD_PXA270)

++ 

++ #define SMC_CAN_USE_8BIT	0

++ #define SMC_CAN_USE_16BIT	1

++ #define SMC_CAN_USE_32BIT	0

++ #define SMC_IO_SHIFT		0

++ #define SMC_NOWAIT		1

++ #define SMC_USE_PXA_DMA		1

++ 

++ // #define SMC_inb(a, r)		readb((a) + (r))

++ #define SMC_inw(a, r)		readw((a) + (r))

++ // #define SMC_inl(a, r)		readl((a) + (r))

++ // #define SMC_outb(v, a, r)	writeb(v, (a) + (r))

++ #define SMC_outw(v, a, r)	writew(v, (a) + (r))

++ // #define SMC_outl(v, a, r)	writel(v, (a) + (r))

++ #define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)

++ #define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)

++ 

+  #elif	defined(CONFIG_ARCH_INNOKOM) || \

+  	defined(CONFIG_MACH_MAINSTONE) || \

+  	defined(CONFIG_ARCH_PXA_IDP) || \

+Index: drivers/video/Kconfig

+===================================================================

+RCS file: /cvs/eps/dev_eng/sw/products/Linux/PXAEngine/pxa/linux-2.6.17-rc5/drivers/video/Kconfig,v

+retrieving revision 1.1.1.1

+retrieving revision 1.2

+diff -c -3 -p -r1.1.1.1 -r1.2

+*** drivers/video/Kconfig	29 May 2006 01:04:29 -0000	1.1.1.1

+--- drivers/video/Kconfig	1 Jun 2006 17:06:34 -0000	1.2

+*************** config FB_PXA_PARAMETERS

+*** 1402,1407 ****

+--- 1402,1436 ----

+  

+  	  <file:Documentation/fb/pxafb.txt> describes the available parameters.

+  

++ choice

++ 	prompt "Select LogicPD LCD panel type"

++ 

++ config FB_PXA_LPD_LQ64D343

++        bool "6.4\" TFT VGA 640x480"

++        depends on FB_PXA

++        ---help---

++          Sharp LQ64D343 LCD panel

++ 

++ config FB_PXA_LPD_LQ035Q7DB02

++        bool "3.5\" TFT QVGA 240x320"

++        depends on FB_PXA

++        ---help---

++          Sharp LQ035Q7DB02 LCD panel

++ 

++ config FB_PXA_LPD_LQ057Q3DC02

++        bool "5.7\" TFT QVGA 240x320"

++        depends on FB_PXA

++        ---help---

++          Sharp LQ057Q3DC02 LCD panel

++ 

++ config FB_PXA_LPD_LQ10D368

++        bool "10.4\" TFT VGA 640x480"

++        depends on FB_PXA

++        ---help---

++          Sharp LQ10D368 LCD panel

++ 

++ endchoice

++ 

+  config FB_W100

+  	tristate "W100 frame buffer support"

+  	depends on FB && PXA_SHARPSL

diff --git a/recipes/linux/logicpd-pxa270-2.6.17-rc5/ucb1400-ac97-audio.patch b/recipes/linux/logicpd-pxa270-2.6.17-rc5/ucb1400-ac97-audio.patch
new file mode 100644
index 0000000000..692dd1d6c1
--- /dev/null
+++ b/recipes/linux/logicpd-pxa270-2.6.17-rc5/ucb1400-ac97-audio.patch
@@ -0,0 +1,86 @@
+Index: linux-2.6.17-rc5/sound/pci/ac97/ac97_codec.c
+===================================================================
+--- linux-2.6.17-rc5.orig/sound/pci/ac97/ac97_codec.c
++++ linux-2.6.17-rc5/sound/pci/ac97/ac97_codec.c
+@@ -151,7 +151,7 @@ static const struct ac97_codec_id snd_ac
+ { 0x4e534300, 0xffffffff, "LM4540,43,45,46,48",	NULL,		NULL }, // only guess --jk
+ { 0x4e534331, 0xffffffff, "LM4549",		NULL,		NULL },
+ { 0x4e534350, 0xffffffff, "LM4550",		patch_lm4550,  	NULL }, // volume wrap fix 
+-{ 0x50534304, 0xffffffff, "UCB1400",		NULL,		NULL },
++{ 0x50534304, 0xffffffff, "UCB1400",		patch_ucb1400,		NULL, AC97_HAS_NO_STD_PCM },
+ { 0x53494c20, 0xffffffe0, "Si3036,8",		mpatch_si3036,	mpatch_si3036, AC97_MODEM_PATCH },
+ { 0x54524102, 0xffffffff, "TR28022",		NULL,		NULL },
+ { 0x54524106, 0xffffffff, "TR28026",		NULL,		NULL },
+Index: linux-2.6.17-rc5/sound/pci/ac97/ac97_patch.c
+===================================================================
+--- linux-2.6.17-rc5.orig/sound/pci/ac97/ac97_patch.c
++++ linux-2.6.17-rc5/sound/pci/ac97/ac97_patch.c
+@@ -375,7 +375,57 @@ int patch_yamaha_ymf753(struct snd_ac97 
+ 	ac97->caps |= 0x04 << 10; /* Yamaha 3D enhancement */
+ 	return 0;
+ }
++/*
++ * UCB1400 codec
++ */
++
++#define AC97_UCB1400_FCSR1	0x6a
++#define AC97_UCB1400_FCSR2	0x6c
++
++static const snd_kcontrol_new_t ucb1400_snd_ac97_controls[] = {
++	AC97_SINGLE("Tone Control - Bass", AC97_UCB1400_FCSR1, 11, 4, 0),
++	AC97_SINGLE("Tone Control - Treble", AC97_UCB1400_FCSR1, 9, 2, 0),
++	AC97_SINGLE("Headphone Playback Switch", AC97_UCB1400_FCSR1, 6, 1, 0),
++	AC97_SINGLE("De-emphasis", AC97_UCB1400_FCSR1, 5, 1, 0),
++	AC97_SINGLE("DC Filter", AC97_UCB1400_FCSR1, 4, 1, 0),
++	AC97_SINGLE("Hi-pass Filter", AC97_UCB1400_FCSR1, 3, 1, 0),
++	AC97_SINGLE("ADC Filter", AC97_UCB1400_FCSR2, 12, 1, 0),
++};
++
++int patch_ucb1400(ac97_t * ac97)
++{
++	int err, i;
+ 
++	for(i = 0; i < ARRAY_SIZE(ucb1400_snd_ac97_controls); i++) {
++		if((err = snd_ctl_add(ac97->bus->card, snd_ac97_cnew(&ucb1400_snd_ac97_controls[i], ac97))) < 0)
++			return err;
++	}
++
++	snd_ac97_write_cache(ac97,  AC97_UCB1400_FCSR1,
++			(0 << 11) |     // 0 base boost
++			(0 << 9)  |     // 0 treble boost
++			(0 << 7)  |     // Mode = flat
++			(1 << 6)  |     // Headphones enable
++			(0 << 5)  |     // De-emphasis disabled
++			(1 << 4)  |     // DC filter enabled
++			(1 << 3)  |     // Hi-pass filter enabled
++			(0 << 2)  |     // disable interrupt signalling via GPIO_INT
++			(1 << 0)        // clear ADC overflow status if set
++		);
++
++	snd_ac97_write_cache(ac97, AC97_UCB1400_FCSR2,
++			(0 << 15) |     // must be 0
++			(0 << 13) |     // must be 0
++			(1 << 12) |     // ADC filter enabled
++			(0 << 10) |     // must be 0
++			(0 << 4)  |     // Smart low power mode on neither Codec nor PLL
++			(0 << 0)        // must be 0
++		);
++
++	return 0;
++}
++
++/*
+ /*
+  * May 2, 2003 Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+  *  removed broken wolfson00 patch.
+Index: linux-2.6.17-rc5/sound/pci/ac97/ac97_patch.h
+===================================================================
+--- linux-2.6.17-rc5.orig/sound/pci/ac97/ac97_patch.h
++++ linux-2.6.17-rc5/sound/pci/ac97/ac97_patch.h
+@@ -58,5 +58,6 @@ int patch_cm9780(struct snd_ac97 * ac97)
+ int patch_vt1616(struct snd_ac97 * ac97);
+ int patch_vt1617a(struct snd_ac97 * ac97);
+ int patch_it2646(struct snd_ac97 * ac97);
++int patch_ucb1400(ac97_t * ac97);
+ int mpatch_si3036(struct snd_ac97 * ac97);
+ int patch_lm4550(struct snd_ac97 * ac97);
diff --git a/recipes/linux/logicpd-pxa270-2.6.17-rc5/ucb1400-touchscreen.patch b/recipes/linux/logicpd-pxa270-2.6.17-rc5/ucb1400-touchscreen.patch
new file mode 100644
index 0000000000..ba04d46176
--- /dev/null
+++ b/recipes/linux/logicpd-pxa270-2.6.17-rc5/ucb1400-touchscreen.patch
@@ -0,0 +1,739 @@
+This patch is slightly adjusted from
+
+http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3073/1
+http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3074/2
+http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=3075/2
+
+in order to get it to apply cleanly to the released 2.6.15 codebase
+and to put the Kconfig stuff in a more reasonable place in the tree.
+Actually, I think Kconfig should probably separate the notion of the
+touchscreen driver and the AC97-MCP layer thing; but that problem is
+basically in the underlying mcp-based ucb1x00 driver layout in the
+first place.
+Index: linux-2.6.17-rc5/drivers/mfd/Makefile
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/Makefile
++++ linux-2.6.17-rc5/drivers/mfd/Makefile
+@@ -10,3 +10,6 @@ obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-
+ ifeq ($(CONFIG_SA1100_ASSABET),y)
+ obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-assabet.o
+ endif
++
++obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= mcp-ac97.o ucb1x00-core.o ucb1x00-ts.o
++
+Index: linux-2.6.17-rc5/drivers/mfd/mcp-core.c
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/mcp-core.c
++++ linux-2.6.17-rc5/drivers/mfd/mcp-core.c
+@@ -18,7 +18,6 @@
+ #include <linux/slab.h>
+ #include <linux/string.h>
+ 
+-#include <asm/dma.h>
+ #include <asm/system.h>
+ 
+ #include "mcp.h"
+@@ -208,6 +207,7 @@ struct mcp *mcp_host_alloc(struct device
+ 		mcp->attached_device.bus = &mcp_bus_type;
+ 		mcp->attached_device.dma_mask = parent->dma_mask;
+ 		mcp->attached_device.release = mcp_release;
++		mcp->dev = &mcp->attached_device;
+ 	}
+ 	return mcp;
+ }
+Index: linux-2.6.17-rc5/drivers/mfd/mcp-sa11x0.c
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/mcp-sa11x0.c
++++ linux-2.6.17-rc5/drivers/mfd/mcp-sa11x0.c
+@@ -31,8 +31,12 @@
+ #include "mcp.h"
+ 
+ struct mcp_sa11x0 {
+-	u32	mccr0;
+-	u32	mccr1;
++	u32		mccr0;
++	u32		mccr1;
++	dma_device_t	dma_audio_rd;
++	dma_device_t	dma_audio_wr;
++	dma_device_t	dma_telco_rd;
++	dma_device_t	dma_telco_wr;
+ };
+ 
+ #define priv(mcp)	((struct mcp_sa11x0 *)mcp_priv(mcp))
+@@ -159,10 +163,10 @@ static int mcp_sa11x0_probe(struct platf
+ 	mcp->owner		= THIS_MODULE;
+ 	mcp->ops		= &mcp_sa11x0;
+ 	mcp->sclk_rate		= data->sclk_rate;
+-	mcp->dma_audio_rd	= DMA_Ser4MCP0Rd;
+-	mcp->dma_audio_wr	= DMA_Ser4MCP0Wr;
+-	mcp->dma_telco_rd	= DMA_Ser4MCP1Rd;
+-	mcp->dma_telco_wr	= DMA_Ser4MCP1Wr;
++	priv(mcp)->dma_audio_rd	= DMA_Ser4MCP0Rd;
++	priv(mcp)->dma_audio_wr	= DMA_Ser4MCP0Wr;
++	priv(mcp)->dma_telco_rd	= DMA_Ser4MCP1Rd;
++	priv(mcp)->dma_telco_wr	= DMA_Ser4MCP1Wr;
+ 
+ 	platform_set_drvdata(pdev, mcp);
+ 
+Index: linux-2.6.17-rc5/drivers/mfd/mcp.h
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/mcp.h
++++ linux-2.6.17-rc5/drivers/mfd/mcp.h
+@@ -19,11 +19,8 @@ struct mcp {
+ 	int		use_count;
+ 	unsigned int	sclk_rate;
+ 	unsigned int	rw_timeout;
+-	dma_device_t	dma_audio_rd;
+-	dma_device_t	dma_audio_wr;
+-	dma_device_t	dma_telco_rd;
+-	dma_device_t	dma_telco_wr;
+ 	struct device	attached_device;
++	struct device	*dev;
+ };
+ 
+ struct mcp_ops {
+Index: linux-2.6.17-rc5/drivers/mfd/ucb1x00-assabet.c
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/ucb1x00-assabet.c
++++ linux-2.6.17-rc5/drivers/mfd/ucb1x00-assabet.c
+@@ -15,8 +15,6 @@
+ #include <linux/proc_fs.h>
+ #include <linux/device.h>
+ 
+-#include <asm/dma.h>
+-
+ #include "ucb1x00.h"
+ 
+ #define UCB1X00_ATTR(name,input)\
+Index: linux-2.6.17-rc5/drivers/mfd/ucb1x00-core.c
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/ucb1x00-core.c
++++ linux-2.6.17-rc5/drivers/mfd/ucb1x00-core.c
+@@ -23,6 +23,7 @@
+ #include <linux/init.h>
+ #include <linux/errno.h>
+ #include <linux/interrupt.h>
++#include <linux/kthread.h>
+ #include <linux/device.h>
+ #include <linux/mutex.h>
+ 
+@@ -31,6 +32,14 @@
+ 
+ #include "ucb1x00.h"
+ 
++#if (defined CONFIG_UCB1400) || (defined CONFIG_UCB1400_MODULE)
++#define UCB_IS_1400(id)  ((id) == UCB_ID_1400)
++#define UCB_X_CSR1        0xe		/* this fake entry will be translated by mcp */
++#define UCB_X_CSR2        0xf		/* this fake entry will be translated by mcp */
++#else
++#define UCB_IS_1400(id)  (0)
++#endif
++
+ static DEFINE_MUTEX(ucb1x00_mutex);
+ static LIST_HEAD(ucb1x00_drivers);
+ static LIST_HEAD(ucb1x00_devices);
+@@ -58,9 +67,9 @@ void ucb1x00_io_set_dir(struct ucb1x00 *
+ 	spin_lock_irqsave(&ucb->io_lock, flags);
+ 	ucb->io_dir |= out;
+ 	ucb->io_dir &= ~in;
++	spin_unlock_irqrestore(&ucb->io_lock, flags);
+ 
+ 	ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+-	spin_unlock_irqrestore(&ucb->io_lock, flags);
+ }
+ 
+ /**
+@@ -86,9 +95,9 @@ void ucb1x00_io_write(struct ucb1x00 *uc
+ 	spin_lock_irqsave(&ucb->io_lock, flags);
+ 	ucb->io_out |= set;
+ 	ucb->io_out &= ~clear;
++	spin_unlock_irqrestore(&ucb->io_lock, flags);
+ 
+ 	ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+-	spin_unlock_irqrestore(&ucb->io_lock, flags);
+ }
+ 
+ /**
+@@ -178,7 +187,7 @@ unsigned int ucb1x00_adc_read(struct ucb
+ 		schedule_timeout(1);
+ 	}
+ 
+-	return UCB_ADC_DAT(val);
++	return UCB_IS_1400(ucb->id) ? (val & 0x3ff) : ((val & 0x7fe0) >> 5);
+ }
+ 
+ /**
+@@ -223,6 +232,47 @@ static irqreturn_t ucb1x00_irq(int irqnr
+ 	return IRQ_HANDLED;
+ }
+ 
++/*
++ * A restriction with interrupts exists when using the ucb1400, as
++ * the codec read/write routines may sleep while waiting for codec
++ * access completion and uses semaphores for access control to the
++ * AC97 bus.  A complete codec read cycle could take  anywhere from
++ * 60 to 100uSec so we *definitely* don't want to spin inside the
++ * interrupt handler waiting for codec access.  So, we handle the
++ * interrupt by scheduling a RT kernel thread to run in process
++ * context instead of interrupt context.
++ */
++static int ucb1x00_thread(void *_ucb)
++{
++	struct task_struct *tsk = current;
++	struct ucb1x00 *ucb = _ucb;
++
++	tsk->policy = SCHED_FIFO;
++	tsk->rt_priority = 1;
++
++	while (!kthread_should_stop()) {
++		wait_for_completion_interruptible(&ucb->irq_wait);
++		if (try_to_freeze())
++			continue;
++		ucb1x00_irq(ucb->irq, ucb, NULL);
++		enable_irq(ucb->irq);
++	}
++
++	ucb->irq_task = NULL;
++	return 0;
++}
++
++static irqreturn_t ucb1x00_threaded_irq(int irqnr, void *devid, struct pt_regs *regs)
++{
++	struct ucb1x00 *ucb = devid;
++	if (irqnr == ucb->irq) {
++		disable_irq(ucb->irq);
++		complete(&ucb->irq_wait);
++		return IRQ_HANDLED;
++	}
++	return IRQ_NONE;
++}
++
+ /**
+  *	ucb1x00_hook_irq - hook a UCB1x00 interrupt
+  *	@ucb:   UCB1x00 structure describing chip
+@@ -276,18 +326,22 @@ void ucb1x00_enable_irq(struct ucb1x00 *
+ 
+ 	if (idx < 16) {
+ 		spin_lock_irqsave(&ucb->lock, flags);
+-
+-		ucb1x00_enable(ucb);
+-		if (edges & UCB_RISING) {
++		if (edges & UCB_RISING)
+ 			ucb->irq_ris_enbl |= 1 << idx;
+-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+-		}
+-		if (edges & UCB_FALLING) {
++		if (edges & UCB_FALLING)
+ 			ucb->irq_fal_enbl |= 1 << idx;
+-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+-		}
+-		ucb1x00_disable(ucb);
+ 		spin_unlock_irqrestore(&ucb->lock, flags);
++
++		ucb1x00_enable(ucb);
++
++		/* This prevents spurious interrupts on the UCB1400 */
++		ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 1 << idx);
++		ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
++
++		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
++		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
++
++		ucb1x00_disable(ucb);
+ 	}
+ }
+ 
+@@ -305,18 +359,16 @@ void ucb1x00_disable_irq(struct ucb1x00 
+ 
+ 	if (idx < 16) {
+ 		spin_lock_irqsave(&ucb->lock, flags);
+-
+-		ucb1x00_enable(ucb);
+-		if (edges & UCB_RISING) {
++		if (edges & UCB_RISING)
+ 			ucb->irq_ris_enbl &= ~(1 << idx);
+-			ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+-		}
+-		if (edges & UCB_FALLING) {
++		if (edges & UCB_FALLING)
+ 			ucb->irq_fal_enbl &= ~(1 << idx);
+-			ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+-		}
+-		ucb1x00_disable(ucb);
+ 		spin_unlock_irqrestore(&ucb->lock, flags);
++
++		ucb1x00_enable(ucb);
++		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
++		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
++		ucb1x00_disable(ucb);
+ 	}
+ }
+ 
+@@ -349,16 +401,17 @@ int ucb1x00_free_irq(struct ucb1x00 *ucb
+ 		ucb->irq_ris_enbl &= ~(1 << idx);
+ 		ucb->irq_fal_enbl &= ~(1 << idx);
+ 
+-		ucb1x00_enable(ucb);
+-		ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
+-		ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
+-		ucb1x00_disable(ucb);
+-
+ 		irq->fn = NULL;
+ 		irq->devid = NULL;
+ 		ret = 0;
+ 	}
+ 	spin_unlock_irq(&ucb->lock);
++
++	ucb1x00_enable(ucb);
++	ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl);
++	ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl);
++	ucb1x00_disable(ucb);
++
+ 	return ret;
+ 
+ bad:
+@@ -478,7 +531,7 @@ static int ucb1x00_probe(struct mcp *mcp
+ 	mcp_enable(mcp);
+ 	id = mcp_reg_read(mcp, UCB_ID);
+ 
+-	if (id != UCB_ID_1200 && id != UCB_ID_1300) {
++	if (id != UCB_ID_1200 && id != UCB_ID_1300 && !UCB_IS_1400(id)) {
+ 		printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
+ 		goto err_disable;
+ 	}
+@@ -491,12 +544,13 @@ static int ucb1x00_probe(struct mcp *mcp
+ 	memset(ucb, 0, sizeof(struct ucb1x00));
+ 
+ 	ucb->cdev.class = &ucb1x00_class;
+-	ucb->cdev.dev = &mcp->attached_device;
++	ucb->cdev.dev = mcp->dev;
+ 	strlcpy(ucb->cdev.class_id, "ucb1x00", sizeof(ucb->cdev.class_id));
+ 
+ 	spin_lock_init(&ucb->lock);
+ 	spin_lock_init(&ucb->io_lock);
+ 	sema_init(&ucb->adc_sem, 1);
++	 init_completion(&ucb->irq_wait);
+ 
+ 	ucb->id  = id;
+ 	ucb->mcp = mcp;
+@@ -507,13 +561,22 @@ static int ucb1x00_probe(struct mcp *mcp
+ 		goto err_free;
+ 	}
+ 
+-	ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING,
+-			  "UCB1x00", ucb);
++	ret = request_irq(ucb->irq,
++			  UCB_IS_1400(id) ? ucb1x00_threaded_irq : ucb1x00_irq,
++			  0, "UCB1x00", ucb);
+ 	if (ret) {
+ 		printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
+ 			ucb->irq, ret);
+ 		goto err_free;
+ 	}
++	if (UCB_IS_1400(id)) {
++		ucb->irq_task = kthread_run(ucb1x00_thread, ucb, "kUCB1x00d");
++		if (IS_ERR(ucb->irq_task)) {
++			ret = PTR_ERR(ucb->irq_task);
++			ucb->irq_task = NULL;
++			goto err_irq;
++		}
++	}
+ 
+ 	mcp_set_drvdata(mcp, ucb);
+ 
+@@ -531,6 +594,8 @@ static int ucb1x00_probe(struct mcp *mcp
+ 	goto out;
+ 
+  err_irq:
++	if (UCB_IS_1400(id) && ucb->irq_task)
++		kthread_stop(ucb->irq_task);
+ 	free_irq(ucb->irq, ucb);
+  err_free:
+ 	kfree(ucb);
+@@ -553,6 +618,8 @@ static void ucb1x00_remove(struct mcp *m
+ 	}
+ 	mutex_unlock(&ucb1x00_mutex);
+ 
++	if (UCB_IS_1400(ucb->id) && ucb->irq_task)
++		kthread_stop(ucb->irq_task);
+ 	free_irq(ucb->irq, ucb);
+ 	class_device_unregister(&ucb->cdev);
+ }
+Index: linux-2.6.17-rc5/drivers/mfd/ucb1x00-ts.c
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/ucb1x00-ts.c
++++ linux-2.6.17-rc5/drivers/mfd/ucb1x00-ts.c
+@@ -33,10 +33,8 @@
+ #include <linux/slab.h>
+ #include <linux/kthread.h>
+ 
+-#include <asm/dma.h>
+-#include <asm/semaphore.h>
+-#include <asm/arch/collie.h>
+ #include <asm/mach-types.h>
++#include <asm/arch-sa1100/collie.h>
+ 
+ #include "ucb1x00.h"
+ 
+@@ -45,13 +43,14 @@ struct ucb1x00_ts {
+ 	struct input_dev	*idev;
+ 	struct ucb1x00		*ucb;
+ 
+-	wait_queue_head_t	irq_wait;
++	struct completion	irq_wait;
+ 	struct task_struct	*rtask;
+ 	u16			x_res;
+ 	u16			y_res;
+ 
+ 	unsigned int		restart:1;
+ 	unsigned int		adcsync:1;
++	unsigned int		go_thread;
+ };
+ 
+ static int adcsync;
+@@ -205,7 +204,6 @@ static int ucb1x00_thread(void *_ts)
+ {
+ 	struct ucb1x00_ts *ts = _ts;
+ 	struct task_struct *tsk = current;
+-	DECLARE_WAITQUEUE(wait, tsk);
+ 	int valid;
+ 
+ 	/*
+@@ -217,10 +215,8 @@ static int ucb1x00_thread(void *_ts)
+ 
+ 	valid = 0;
+ 
+-	add_wait_queue(&ts->irq_wait, &wait);
+-	while (!kthread_should_stop()) {
++	while (!kthread_should_stop() && ts->go_thread) {
+ 		unsigned int x, y, p;
+-		signed long timeout;
+ 
+ 		ts->restart = 0;
+ 
+@@ -242,8 +238,6 @@ static int ucb1x00_thread(void *_ts)
+ 
+ 
+ 		if (ucb1x00_ts_pen_down(ts)) {
+-			set_task_state(tsk, TASK_INTERRUPTIBLE);
+-
+ 			ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
+ 			ucb1x00_disable(ts->ucb);
+ 
+@@ -256,7 +250,16 @@ static int ucb1x00_thread(void *_ts)
+ 				valid = 0;
+ 			}
+ 
+-			timeout = MAX_SCHEDULE_TIMEOUT;
++			/*
++			 * Since ucb1x00_enable_irq() might sleep due
++			 * to the way the UCB1400 regs are accessed, we
++			 * can't use set_task_state() before that call,
++			 * and not changing state before enabling the
++			 * interrupt is racy. A completion handler avoids
++			 * the issue.
++			 */
++			wait_for_completion_interruptible(&ts->irq_wait);
++
+ 		} else {
+ 			ucb1x00_disable(ts->ucb);
+ 
+@@ -271,16 +274,12 @@ static int ucb1x00_thread(void *_ts)
+ 			}
+ 
+ 			set_task_state(tsk, TASK_INTERRUPTIBLE);
+-			timeout = HZ / 100;
++			schedule_timeout(HZ/100);
+ 		}
+ 
+ 		try_to_freeze();
+-
+-		schedule_timeout(timeout);
+ 	}
+ 
+-	remove_wait_queue(&ts->irq_wait, &wait);
+-
+ 	ts->rtask = NULL;
+ 	return 0;
+ }
+@@ -293,7 +292,7 @@ static void ucb1x00_ts_irq(int idx, void
+ {
+ 	struct ucb1x00_ts *ts = id;
+ 	ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+-	wake_up(&ts->irq_wait);
++	complete(&ts->irq_wait);
+ }
+ 
+ static int ucb1x00_ts_open(struct input_dev *idev)
+@@ -303,7 +302,7 @@ static int ucb1x00_ts_open(struct input_
+ 
+ 	BUG_ON(ts->rtask);
+ 
+-	init_waitqueue_head(&ts->irq_wait);
++	init_completion(&ts->irq_wait);
+ 	ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts);
+ 	if (ret < 0)
+ 		goto out;
+@@ -318,6 +317,8 @@ static int ucb1x00_ts_open(struct input_
+ 	ucb1x00_adc_disable(ts->ucb);
+ 
+ 	ts->rtask = kthread_run(ucb1x00_thread, ts, "ktsd");
++	ts->go_thread = 1; //start thread!
++
+ 	if (!IS_ERR(ts->rtask)) {
+ 		ret = 0;
+ 	} else {
+@@ -337,9 +338,14 @@ static void ucb1x00_ts_close(struct inpu
+ {
+ 	struct ucb1x00_ts *ts = idev->private;
+ 
++
++	ts->go_thread = 0; //Stop thread!
++	complete(&ts->irq_wait);
++
+ 	if (ts->rtask)
+ 		kthread_stop(ts->rtask);
+ 
++
+ 	ucb1x00_enable(ts->ucb);
+ 	ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts);
+ 	ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0);
+@@ -358,7 +364,7 @@ static int ucb1x00_ts_resume(struct ucb1
+ 		 * after sleep.
+ 		 */
+ 		ts->restart = 1;
+-		wake_up(&ts->irq_wait);
++		complete(&ts->irq_wait);
+ 	}
+ 	return 0;
+ }
+Index: linux-2.6.17-rc5/drivers/mfd/ucb1x00.h
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/mfd/ucb1x00.h
++++ linux-2.6.17-rc5/drivers/mfd/ucb1x00.h
+@@ -94,6 +94,7 @@
+ #define UCB_ID		0x0c
+ #define UCB_ID_1200		0x1004
+ #define UCB_ID_1300		0x1005
++#define UCB_ID_1400		0x4304
+ 
+ #define UCB_MODE	0x0d
+ #define UCB_MODE_DYN_VFLAG_ENA	(1 << 12)
+@@ -110,6 +111,8 @@ struct ucb1x00 {
+ 	spinlock_t		lock;
+ 	struct mcp		*mcp;
+ 	unsigned int		irq;
++	struct task_struct	*irq_task;
++	struct completion	irq_wait;
+ 	struct semaphore	adc_sem;
+ 	spinlock_t		io_lock;
+ 	u16			id;
+@@ -122,6 +125,7 @@ struct ucb1x00 {
+ 	struct class_device	cdev;
+ 	struct list_head	node;
+ 	struct list_head	devs;
++
+ };
+ 
+ struct ucb1x00_driver;
+Index: linux-2.6.17-rc5/drivers/mfd/mcp-ac97.c
+===================================================================
+--- /dev/null
++++ linux-2.6.17-rc5/drivers/mfd/mcp-ac97.c
+@@ -0,0 +1,153 @@
++/*
++ * linux/drivers/misc/mcp-ac97.c
++ *
++ * Author:	Nicolas Pitre
++ * Created:	Jan 14, 2005
++ * Copyright:	(C) MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This module provides the minimum replacement for mcp-core.c allowing for
++ * the UCB1400 chip to be driven by the ucb1x00 driver over an AC97 link.
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/errno.h>
++#include <linux/device.h>
++
++#include <sound/driver.h>
++#include <sound/core.h>
++#include <sound/ac97_codec.h>
++
++#include "mcp.h"
++
++/* ucb1x00 SIB register to ucb1400 AC-link register mapping */
++
++static const unsigned char regmap[] = {
++	0x5a,	/* UCB_IO_DATA */
++	0X5C,	/* UCB_IO_DIR */
++	0X5E,	/* UCB_IE_RIS */
++	0x60,	/* UCB_IE_FAL */
++	0x62,	/* UCB_IE_STATUS */
++	0,	/* UCB_TC_A */
++	0,	/* UCB_TC_B */
++	0,	/* UCB_AC_A */
++	0,	/* UCB_AC_B */
++	0x64,	/* UCB_TS_CR */
++	0x66,	/* UCB_ADC_CR */
++	0x68,	/* UCB_ADC_DATA */
++	0x7e,	/* UCB_ID */
++	0,	/* UCB_MODE */
++};
++
++unsigned int mcp_reg_read(struct mcp *mcp, unsigned int reg)
++{
++	ac97_t *ac97 = to_ac97_t(mcp->dev);
++	if (reg < ARRAY_SIZE(regmap)) {
++		reg = regmap[reg];
++		if (reg)
++			return ac97->bus->ops->read(ac97, reg);
++	}
++	return -1;
++}
++EXPORT_SYMBOL(mcp_reg_read);
++
++void mcp_reg_write(struct mcp *mcp, unsigned int reg, unsigned int val)
++{
++	ac97_t *ac97 = to_ac97_t(mcp->dev);
++	if (reg < ARRAY_SIZE(regmap)) {
++		reg = regmap[reg];
++		if (reg)
++			ac97->bus->ops->write(ac97, reg, val);
++	}
++}
++EXPORT_SYMBOL(mcp_reg_write);
++
++void mcp_enable(struct mcp *mcp)
++{
++}
++EXPORT_SYMBOL(mcp_enable);
++
++void mcp_disable(struct mcp *mcp)
++{
++}
++EXPORT_SYMBOL(mcp_disable);
++
++#define to_mcp_driver(d)	container_of(d, struct mcp_driver, drv)
++
++static int mcp_probe(struct device *dev)
++{
++	struct mcp_driver *drv = to_mcp_driver(dev->driver);
++	struct mcp *mcp;
++	int ret;
++
++	ret = -ENOMEM;
++	mcp = kmalloc(sizeof(*mcp), GFP_KERNEL);
++	if (mcp) {
++		memset(mcp, 0, sizeof(*mcp));
++		mcp->owner = THIS_MODULE;
++		mcp->dev = dev;
++		ret = drv->probe(mcp);
++		if (ret)
++			kfree(mcp);
++	}
++	if (!ret)
++		dev_set_drvdata(dev, mcp);
++	return ret;
++}
++
++static int mcp_remove(struct device *dev)
++{
++	struct mcp_driver *drv = to_mcp_driver(dev->driver);
++	struct mcp *mcp = dev_get_drvdata(dev);
++
++	drv->remove(mcp);
++	dev_set_drvdata(dev, NULL);
++	kfree(mcp);
++	return 0;
++}
++
++static int mcp_suspend(struct device *dev, pm_message_t state)
++{
++	struct mcp_driver *drv = to_mcp_driver(dev->driver);
++	struct mcp *mcp = dev_get_drvdata(dev);
++	int ret = 0;
++
++	if (drv->suspend)
++		ret = drv->suspend(mcp, state);
++	return ret;
++}
++
++static int mcp_resume(struct device *dev)
++{
++	struct mcp_driver *drv = to_mcp_driver(dev->driver);
++	struct mcp *mcp = dev_get_drvdata(dev);
++	int ret = 0;
++
++	if (drv->resume)
++		ret = drv->resume(mcp);
++	return ret;
++}
++
++int mcp_driver_register(struct mcp_driver *mcpdrv)
++{
++	mcpdrv->drv.owner = THIS_MODULE;
++	mcpdrv->drv.bus = &ac97_bus_type;
++	mcpdrv->drv.probe = mcp_probe;
++	mcpdrv->drv.remove = mcp_remove;
++	mcpdrv->drv.suspend = mcp_suspend;
++	mcpdrv->drv.resume = mcp_resume;
++	return driver_register(&mcpdrv->drv);
++}
++EXPORT_SYMBOL(mcp_driver_register);
++
++void mcp_driver_unregister(struct mcp_driver *mcpdrv)
++{
++	driver_unregister(&mcpdrv->drv);
++}
++EXPORT_SYMBOL(mcp_driver_unregister);
++
++MODULE_LICENSE("GPL");
+Index: linux-2.6.17-rc5/drivers/input/touchscreen/Kconfig
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/input/touchscreen/Kconfig
++++ linux-2.6.17-rc5/drivers/input/touchscreen/Kconfig
+@@ -24,6 +24,25 @@ config TOUCHSCREEN_ADS7846
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called ads7846.
+ 
++config UCB1400
++	bool
++
++config TOUCHSCREEN_UCB1400
++	tristate "UCB1400 Touchscreen support"
++	depends on ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_PXA
++	select SND_AC97_BUS
++	select UCB1400
++	help
++	  Say Y here if you have a touchscreen connected to a UCB1400 ADC chip
++	  on the AC97 bus of a PXA255/PXA270 host.
++
++	  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  module will be called ucb1x00-ts.  It will also build the modules
++	  ucb1x00-core and mcp-ac97 which provide the compatibility layers
++	  down to the AC97 bus.
++
+ config TOUCHSCREEN_BITSY
+ 	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
+ 	depends on SA1100_BITSY
+Index: linux-2.6.17-rc5/drivers/input/Kconfig
+===================================================================
+--- linux-2.6.17-rc5.orig/drivers/input/Kconfig
++++ linux-2.6.17-rc5/drivers/input/Kconfig
+@@ -87,7 +87,7 @@ config INPUT_JOYDEV
+ 	  module will be called joydev.
+ 
+ config INPUT_TSDEV
+-	tristate "Touchscreen interface"
++	tristate "Compaq touchscreen interface"
+ 	---help---
+ 	  Say Y here if you have an application that only can understand the
+ 	  Compaq touchscreen protocol for absolute pointer data. This is