rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 176 insertions, 0 deletions

diff --git a/recipes/linux/linux.inc b/recipes/linux/linux.inc
new file mode 100644
index 0000000000..984efac4d3
--- /dev/null
+++ b/recipes/linux/linux.inc
@@ -0,0 +1,176 @@
+DESCRIPTION = "Linux Kernel"
+SECTION = "kernel"
+LICENSE = "GPL"
+
+inherit kernel
+
+RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
+
+# Enable OABI compat for people stuck with obsolete userspace
+ARM_KEEP_OABI ?= "1"
+
+# Specify the commandline for your device
+
+# Boot from mmc
+CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5"
+# Boot from nfs
+#CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0"
+
+# Set the verbosity of kernel messages during runtime
+# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour  
+CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
+CMDLINE_append = " ${CMDLINE_DEBUG} "
+
+# Support for binary device tree generation
+
+FILES_kernel-devicetree = "/boot/devicetree*"
+
+KERNEL_DEVICETREE_boc01 = "${WORKDIR}/boc01.dts"
+KERNEL_DEVICETREE_canyonlands = "arch/${ARCH}/boot/dts/canyonlands.dts"
+KERNEL_DEVICETREE_kilauea = "arch/${ARCH}/boot/dts/kilauea.dts"
+KERNEL_DEVICETREE_lsppchd = "arch/${ARCH}/boot/dts/kuroboxHD.dts"
+KERNEL_DEVICETREE_lsppchg = "arch/${ARCH}/boot/dts/kuroboxHG.dts"
+KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
+KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
+KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
+KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
+
+KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
+
+python __anonymous () {
+
+    import bb
+    
+    devicetree = bb.data.getVar('KERNEL_DEVICETREE', d, 1) or ''
+    if devicetree:
+    	depends = bb.data.getVar("DEPENDS", d, 1)
+    	bb.data.setVar("DEPENDS", "%s dtc-native" % depends, d)
+    	packages = bb.data.getVar("PACKAGES", d, 1)
+    	bb.data.setVar("PACKAGES", "%s kernel-devicetree" % packages, d)
+}
+
+do_configure_prepend() {
+        echo "" > ${S}/.config
+
+        #
+        # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
+        #
+        if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
+                install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+                echo "CONFIG_LOGO=y"                    >> ${S}/.config
+                echo "CONFIG_LOGO_LINUX_CLUT224=y"      >> ${S}/.config
+        fi
+
+        #
+        # oabi / eabi support
+        #
+        if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibcgnueabi" ]; then
+                echo "CONFIG_AEABI=y"                   >> ${S}/.config
+                if [ "${ARM_KEEP_OABI}" = "1" ] ; then
+                        echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
+                else
+                        echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+                fi
+        else
+                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
+                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
+        fi
+
+        # When enabling thumb for userspace we also need thumb support in the kernel
+        if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
+            sed -i -e /CONFIG_ARM_THUMB/d ${WORKDIR}/defconfig 
+            echo "CONFIG_ARM_THUMB=y" >> ${S}/.config
+        fi
+
+	#
+	# endian support
+	#
+        if [ "${SITEINFO_ENDIANESS}" = "be" ]; then
+                echo "CONFIG_CPU_BIG_ENDIAN=y"          >> ${S}/.config
+        fi
+
+        echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+        sed -e '/CONFIG_AEABI/d' \
+            -e '/CONFIG_OABI_COMPAT=/d' \
+            -e '/CONFIG_CMDLINE=/d' \
+            -e '/CONFIG_CPU_BIG_ENDIAN/d' \
+            -e '/CONFIG_LOGO=/d' \
+            -e '/CONFIG_LOGO_LINUX_CLUT224=/d' \
+            -e '/CONFIG_LOCALVERSION/d' \
+	    < '${WORKDIR}/defconfig' >>'${S}/.config'
+
+        #
+        # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
+        # Enable this by setting a proper CMDLINE_NFSROOT_USB.
+        #
+        if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+                oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+                sed -e '/CONFIG_INET/d' \
+                    -e '/CONFIG_IP_PNP=/d' \
+                    -e '/CONFIG_USB_GADGET=/d' \
+                    -e '/CONFIG_USB_GADGET_SELECTED=/d' \
+                    -e '/CONFIG_USB_ETH=/d' \
+                    -e '/CONFIG_NFS_FS=/d' \
+                    -e '/CONFIG_ROOT_NFS=/d' \
+                    -e '/CONFIG_CMDLINE=/d' \
+                    -i ${S}/.config
+                echo "CONFIG_INET=y"                     >> ${S}/.config
+                echo "CONFIG_IP_PNP=y"                   >> ${S}/.config
+                echo "CONFIG_USB_GADGET=y"               >> ${S}/.config
+                echo "CONFIG_USB_GADGET_SELECTED=y"      >> ${S}/.config
+                echo "CONFIG_USB_ETH=y"                  >> ${S}/.config
+                echo "CONFIG_NFS_FS=y"                   >> ${S}/.config
+                echo "CONFIG_ROOT_NFS=y"                 >> ${S}/.config
+                echo "CONFIG_CMDLINE=\"${CMDLINE_NFSROOT_USB}\"" >> ${S}/.config
+        fi
+		yes '' | oe_runmake oldconfig
+}
+
+do_configure_append_avr32() {
+        sed -i -e s:-mno-pic::g arch/avr32/Makefile
+}
+
+do_configure_append() {
+        if test -e scripts/Makefile.fwinst ; then
+		sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
+	fi
+}
+
+do_compile_append() {
+    if test "x${KERNEL_IMAGETYPE}" = "xuImage" ; then 
+        if test -e arch/${ARCH}/boot/compressed/vmlinux ; then
+            ${OBJCOPY} -O binary -R .note -R .comment -S arch/${ARCH}/boot/compressed/vmlinux linux.bin
+            uboot-mkimage -A ${UBOOT_ARCH} -O linux -T kernel -C none -a ${UBOOT_LOADADDRESS} -e ${UBOOT_ENTRYPOINT} -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin arch/${ARCH}/boot/uImage
+            rm -f linux.bin
+        else
+            ${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin
+            rm -f linux.bin.gz
+            gzip -9 linux.bin
+            uboot-mkimage -A ${UBOOT_ARCH} -O linux -T kernel -C gzip -a ${UBOOT_LOADADDRESS} -e ${UBOOT_ENTRYPOINT} -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin.gz arch/${ARCH}/boot/uImage
+            rm -f linux.bin.gz
+        fi
+    fi
+}
+
+do_devicetree_image() {
+    if test -n "${KERNEL_DEVICETREE}" ; then
+        dtc -I dts -O dtb ${KERNEL_DEVICETREE_FLAGS} -o devicetree ${KERNEL_DEVICETREE}
+        install -m 0644 devicetree ${D}/boot/devicetree-${KERNEL_VERSION}
+        install -m 0644 devicetree ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
+        cd ${DEPLOY_DIR_IMAGE}
+        rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
+        ln -sf ${KERNEL_IMAGE_BASE_NAME}.dtb ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
+    fi
+}
+
+addtask devicetree_image after do_deploy before do_package
+
+pkg_postinst_kernel-devicetree () {
+	cd /${KERNEL_IMAGEDEST}; update-alternatives --install /${KERNEL_IMAGEDEST}/devicetree devicetree devicetree-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
+}
+
+pkg_postrm_kernel-devicetree () {
+	cd /${KERNEL_IMAGEDEST}; update-alternatives --remove devicetree devicetree-${KERNEL_VERSION} || true
+}
+