linux-omap-pm git: update to latest git, refresh DSS2 patches

100 files changed, 24713 insertions, 13624 deletions

diff --git a/recipes/linux/linux-omap-pm/0001-ASoC-Add-support-for-OMAP3-EVM.patch b/recipes/linux/linux-omap-pm/0001-ASoC-Add-support-for-OMAP3-EVM.patch
deleted file mode 100644
index a76e96e444..0000000000
--- a/recipes/linux/linux-omap-pm/0001-ASoC-Add-support-for-OMAP3-EVM.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From c1dad0b6b434300ae64c902d11611c54c513ea10 Mon Sep 17 00:00:00 2001
-From: Anuj Aggarwal <anuj.aggarwal@ti.com>
-Date: Fri, 21 Nov 2008 17:41:03 +0530
-Subject: [PATCH] ASoC: Add support for OMAP3 EVM
-
-This patch adds ALSA SoC support for OMAP3 EVM using TWL4030 audio codec.
-
-Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
----
- sound/soc/omap/Kconfig    |    8 +++
- sound/soc/omap/Makefile   |    3 +-
- sound/soc/omap/omap3evm.c |  147 +++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 157 insertions(+), 1 deletions(-)
- create mode 100644 sound/soc/omap/omap3evm.c
-
-diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
-index 0daeee4..deb6ba9 100644
---- a/sound/soc/omap/Kconfig
-+++ b/sound/soc/omap/Kconfig
-@@ -22,6 +22,14 @@ config SND_OMAP_SOC_OMAP3_BEAGLE
- 	help
- 	  Say Y if you want to add support for SoC audio on the Beagleboard.
- 
-+config SND_OMAP_SOC_OMAP3EVM
-+        tristate "SoC Audio support for OMAP3EVM board"
-+        depends on SND_OMAP_SOC && MACH_OMAP3EVM
-+        select SND_OMAP_SOC_MCBSP
-+        select SND_SOC_TWL4030
-+        help
-+          Say Y if you want to add support for SoC audio on the omap3evm board.
-+
- config SND_OMAP_SOC_OSK5912
- 	tristate "SoC Audio support for omap osk5912"
- 	depends on SND_OMAP_SOC && MACH_OMAP_OSK
-diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
-index 4bae404..ef31c25 100644
---- a/sound/soc/omap/Makefile
-+++ b/sound/soc/omap/Makefile
-@@ -10,9 +10,10 @@ snd-soc-n810-objs := n810.o
- snd-soc-omap3beagle-objs := omap3beagle.o
- snd-soc-osk5912-objs := osk5912.o
- snd-soc-overo-objs := overo.o
-+snd-soc-omap3evm-objs := omap3evm.o
- 
- obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
- obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
- obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
- obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
--
-+obj-$(CONFIG_MACH_OMAP3EVM) += snd-soc-omap3evm.o
-diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
-new file mode 100644
-index 0000000..570af55
---- /dev/null
-+++ b/sound/soc/omap/omap3evm.c
-@@ -0,0 +1,147 @@
-+/*
-+ * omap3evm.c  -- ALSA SoC support for OMAP3 EVM
-+ *
-+ * Author: Anuj Aggarwal <anuj.aggarwal@ti.com>
-+ *
-+ * Based on sound/soc/omap/beagle.c by Steve Sakoman
-+ *
-+ * Copyright (C) 2008 Texas Instruments, Incorporated
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation version 2.
-+ *
-+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
-+ * whether express or implied; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <sound/soc-dapm.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <mach/gpio.h>
-+#include <mach/mcbsp.h>
-+
-+#include "omap-mcbsp.h"
-+#include "omap-pcm.h"
-+#include "../codecs/twl4030.h"
-+
-+static int omap3evm_hw_params(struct snd_pcm_substream *substream,
-+	struct snd_pcm_hw_params *params)
-+{
-+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
-+	int ret;
-+
-+	/* Set codec DAI configuration */
-+	ret = snd_soc_dai_set_fmt(codec_dai,
-+				  SND_SOC_DAIFMT_I2S |
-+				  SND_SOC_DAIFMT_NB_NF |
-+				  SND_SOC_DAIFMT_CBM_CFM);
-+	if (ret < 0) {
-+		printk(KERN_ERR "can't set codec DAI configuration\n");
-+		return ret;
-+	}
-+
-+	/* Set cpu DAI configuration */
-+	ret = snd_soc_dai_set_fmt(cpu_dai,
-+				  SND_SOC_DAIFMT_I2S |
-+				  SND_SOC_DAIFMT_NB_NF |
-+				  SND_SOC_DAIFMT_CBM_CFM);
-+	if (ret < 0) {
-+		printk(KERN_ERR "can't set cpu DAI configuration\n");
-+		return ret;
-+	}
-+
-+	/* Set the codec system clock for DAC and ADC */
-+	ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
-+				     SND_SOC_CLOCK_IN);
-+	if (ret < 0) {
-+		printk(KERN_ERR "can't set codec system clock\n");
-+		return ret;
-+	}
-+
-+	return 0;
-+}
-+
-+static struct snd_soc_ops omap3evm_ops = {
-+	.hw_params = omap3evm_hw_params,
-+};
-+
-+/* Digital audio interface glue - connects codec <--> CPU */
-+static struct snd_soc_dai_link omap3evm_dai = {
-+	.name = "TWL4030",
-+	.stream_name = "TWL4030",
-+	.cpu_dai = &omap_mcbsp_dai[0],
-+	.codec_dai = &twl4030_dai,
-+	.ops = &omap3evm_ops,
-+};
-+
-+/* Audio machine driver */
-+static struct snd_soc_machine snd_soc_machine_omap3evm = {
-+	.name = "omap3evm",
-+	.dai_link = &omap3evm_dai,
-+	.num_links = 1,
-+};
-+
-+/* Audio subsystem */
-+static struct snd_soc_device omap3evm_snd_devdata = {
-+	.machine = &snd_soc_machine_omap3evm,
-+	.platform = &omap_soc_platform,
-+	.codec_dev = &soc_codec_dev_twl4030,
-+};
-+
-+static struct platform_device *omap3evm_snd_device;
-+
-+static int __init omap3evm_soc_init(void)
-+{
-+	int ret;
-+
-+	if (!machine_is_omap3evm()) {
-+		pr_debug("Not OMAP3 EVM!\n");
-+		return -ENODEV;
-+	}
-+	pr_info("OMAP3 EVM SoC init\n");
-+
-+	omap3evm_snd_device = platform_device_alloc("soc-audio", -1);
-+	if (!omap3evm_snd_device) {
-+		printk(KERN_ERR "Platform device allocation failed\n");
-+		return -ENOMEM;
-+	}
-+
-+	platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata);
-+	omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev;
-+	*(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1; /* McBSP2 */
-+
-+	ret = platform_device_add(omap3evm_snd_device);
-+	if (ret)
-+		goto err1;
-+
-+	return 0;
-+
-+err1:
-+	printk(KERN_ERR "Unable to add platform device\n");
-+	platform_device_put(omap3evm_snd_device);
-+
-+	return ret;
-+}
-+
-+static void __exit omap3evm_soc_exit(void)
-+{
-+	platform_device_unregister(omap3evm_snd_device);
-+}
-+
-+module_init(omap3evm_soc_init);
-+module_exit(omap3evm_soc_exit);
-+
-+MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
-+MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
-+MODULE_LICENSE("GPL");
--- 
-1.5.6.5
-
diff --git a/recipes/linux/linux-omap-pm/0001-Implement-downsampling-with-debugs.patch b/recipes/linux/linux-omap-pm/0001-Implement-downsampling-with-debugs.patch
deleted file mode 100644
index d3608df9cb..0000000000
--- a/recipes/linux/linux-omap-pm/0001-Implement-downsampling-with-debugs.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 1ef94095e9399a9a387b7b457b48f6c5de7013d8 Mon Sep 17 00:00:00 2001
-From: Tuomas Kulve <tuomas.kulve@movial.com>
-Date: Fri, 31 Oct 2008 14:23:57 +0200
-Subject: [PATCH] Implement downsampling (with debugs).
-
----
- drivers/video/omap/dispc.c |   75 +++++++++++++++++++++++++++++++++++++-------
- 1 files changed, 63 insertions(+), 12 deletions(-)
-
-diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
-index 68bc887..3640dbe 100644
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -18,6 +18,8 @@
-  * with this program; if not, write to the Free Software Foundation, Inc.,
-  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
-  */
-+#define DEBUG
-+#define VERBOSE_DEBUG
- #include <linux/kernel.h>
- #include <linux/dma-mapping.h>
- #include <linux/mm.h>
-@@ -545,6 +547,17 @@ static void write_firhv_reg(int plane, int reg, u32 value)
- 	dispc_write_reg(base + reg * 8,	value);
- }
- 
-+static void write_firv_reg(int plane, int reg, u32 value)
-+{
-+	u32 base;
-+
-+	if (plane == 1)
-+		base = 0x1E0;
-+	else
-+		base = 0x1E0 + 0x20;
-+	dispc_write_reg(base + reg * 4,	value);
-+}
-+
- static void set_upsampling_coef_table(int plane)
- {
- 	const u32 coef[][2] = {
-@@ -565,6 +578,27 @@ static void set_upsampling_coef_table(int plane)
- 	}
- }
- 
-+static void set_downsampling_coef_table(int plane)
-+{
-+	const u32 coef[][3] = {
-+                { 0x24382400, 0x24382400, 0x00000000 },
-+                { 0x28371FFE, 0x28391F04, 0x000004FE },
-+                { 0x2C361BFB, 0x2D381B08, 0x000008FB },
-+                { 0x303516F9, 0x3237170C, 0x00000CF9 },
-+                { 0x11343311, 0x123737F7, 0x0000F711 },
-+                { 0x1635300C, 0x173732F9, 0x0000F90C },
-+                { 0x1B362C08, 0x1B382DFB, 0x0000FB08 },
-+                { 0x1F372804, 0x1F3928FE, 0x0000FE04 },
-+	};
-+	int i;
-+
-+	for (i = 0; i < 8; i++) {
-+		write_firh_reg(plane, i, coef[i][0]);
-+		write_firhv_reg(plane, i, coef[i][1]);
-+		write_firv_reg(plane, i, coef[i][2]);
-+	}
-+}
-+
- static int omap_dispc_set_scale(int plane,
- 				int orig_width, int orig_height,
- 				int out_width, int out_height)
-@@ -592,25 +626,47 @@ static int omap_dispc_set_scale(int plane,
- 		if (orig_height > out_height ||
- 		    orig_width * 8 < out_width ||
- 		    orig_height * 8 < out_height) {
-+                        dev_dbg(dispc.fbdev->dev, 
-+                                "Max upsampling is 8x, "
-+                                "tried: %dx%d -> %dx%d\n",
-+                                orig_width, orig_height,
-+                                out_width, out_height);
- 			enable_lcd_clocks(0);
- 			return -EINVAL;
- 		}
- 		set_upsampling_coef_table(plane);
- 	} else if (orig_width > out_width) {
--		/* Downsampling not yet supported
--		*/
--
--		enable_lcd_clocks(0);
--		return -EINVAL;
-+		/*
-+		 * Downsampling.
-+		 * Currently you can only scale both dimensions in one way.
-+		 */
-+		if (orig_height < out_height ||
-+		    orig_width > out_width * 4||
-+		    orig_height > out_height * 4) {
-+                        dev_dbg(dispc.fbdev->dev, 
-+                                "Max downsampling is 4x, "
-+                                "tried: %dx%d -> %dx%d\n",
-+                                orig_width, orig_height,
-+                                out_width, out_height);
-+			enable_lcd_clocks(0);
-+			return -EINVAL;
-+		}
-+		set_downsampling_coef_table(plane);
- 	}
- 	if (!orig_width || orig_width == out_width)
- 		fir_hinc = 0;
- 	else
--		fir_hinc = 1024 * orig_width / out_width;
-+		fir_hinc = 1024 * (orig_width -1)/ (out_width -1);
- 	if (!orig_height || orig_height == out_height)
- 		fir_vinc = 0;
- 	else
--		fir_vinc = 1024 * orig_height / out_height;
-+		fir_vinc = 1024 * (orig_height-1) / (out_height -1 );
-+
-+	dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
-+		"orig_height %d fir_hinc  %d fir_vinc %d\n",
-+		out_width, out_height, orig_width, orig_height,
-+		fir_hinc, fir_vinc);
-+
- 	dispc.fir_hinc[plane] = fir_hinc;
- 	dispc.fir_vinc[plane] = fir_vinc;
- 
-@@ -619,11 +675,6 @@ static int omap_dispc_set_scale(int plane,
- 		    ((fir_vinc & 4095) << 16) |
- 		    (fir_hinc & 4095));
- 
--	dev_dbg(dispc.fbdev->dev, "out_width %d out_height %d orig_width %d "
--		"orig_height %d fir_hinc  %d fir_vinc %d\n",
--		out_width, out_height, orig_width, orig_height,
--		fir_hinc, fir_vinc);
--
- 	MOD_REG_FLD(vs_reg[plane],
- 		    FLD_MASK(16, 11) | FLD_MASK(0, 11),
- 		    ((out_height - 1) << 16) | (out_width - 1));
--- 
-1.5.6.5
-
diff --git a/recipes/linux/linux-omap-pm/0001-Removed-resolution-check-that-prevents-scaling-when.patch b/recipes/linux/linux-omap-pm/0001-Removed-resolution-check-that-prevents-scaling-when.patch
deleted file mode 100644
index 636203ef32..0000000000
--- a/recipes/linux/linux-omap-pm/0001-Removed-resolution-check-that-prevents-scaling-when.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 3227bd5c412e7eb0d4370b2834e71723f6b4be48 Mon Sep 17 00:00:00 2001
-From: Tuomas Kulve <tuomas.kulve@movial.fi>
-Date: Mon, 27 Oct 2008 18:55:59 +0200
-Subject: [PATCH] Removed resolution check that prevents scaling when output resolution doesn't match the original resolution.
-
----
- drivers/video/omap/dispc.c |    3 ---
- 1 files changed, 0 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
-index 0f0b2e5..1df0c1e 100644
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -579,9 +579,6 @@ static int omap_dispc_set_scale(int plane,
- 	if ((unsigned)plane > OMAPFB_PLANE_NUM)
- 		return -ENODEV;
- 
--	if (out_width != orig_width || out_height != orig_height)
--		return -EINVAL;
--
- 	enable_lcd_clocks(1);
- 	if (orig_width < out_width) {
- 		/*
--- 
-1.5.6.5
-
diff --git a/recipes/linux/linux-omap-pm/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch b/recipes/linux/linux-omap-pm/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch
deleted file mode 100644
index 0d9dba3311..0000000000
--- a/recipes/linux/linux-omap-pm/0002-DSS-OMAPFB-fb-driver-for-new-display-subsystem.patch
+++ /dev/null
@@ -1,3809 +0,0 @@
-From 2167c1818af2d302d3934185b534ea4006c407c7 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 14:30:18 +0200
-Subject: [PATCH] DSS: OMAPFB: fb driver for new display subsystem
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- arch/arm/plat-omap/Makefile              |    2 +-
- arch/arm/plat-omap/fb-vram.c             |  646 +++++++++++++
- arch/arm/plat-omap/fb.c                  |   22 +
- arch/arm/plat-omap/include/mach/omapfb.h |   14 +
- drivers/video/Kconfig                    |    1 +
- drivers/video/Makefile                   |    1 +
- drivers/video/omap/Kconfig               |    5 +-
- drivers/video/omap2/Kconfig              |   42 +
- drivers/video/omap2/Makefile             |    2 +
- drivers/video/omap2/omapfb-ioctl.c       |  464 ++++++++++
- drivers/video/omap2/omapfb-main.c        | 1441 ++++++++++++++++++++++++++++++
- drivers/video/omap2/omapfb-sysfs.c       |  901 +++++++++++++++++++
- drivers/video/omap2/omapfb.h             |  115 +++
- 13 files changed, 3653 insertions(+), 3 deletions(-)
- create mode 100644 arch/arm/plat-omap/fb-vram.c
- create mode 100644 drivers/video/omap2/Kconfig
- create mode 100644 drivers/video/omap2/Makefile
- create mode 100644 drivers/video/omap2/omapfb-ioctl.c
- create mode 100644 drivers/video/omap2/omapfb-main.c
- create mode 100644 drivers/video/omap2/omapfb-sysfs.c
- create mode 100644 drivers/video/omap2/omapfb.h
-
-diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
-index 2740497..7d602a6 100644
---- a/arch/arm/plat-omap/Makefile
-+++ b/arch/arm/plat-omap/Makefile
-@@ -4,7 +4,7 @@
- 
- # Common support
- obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
--	 usb.o fb.o io.o
-+	 usb.o fb.o fb-vram.o io.o
- obj-m :=
- obj-n :=
- obj-  :=
-diff --git a/arch/arm/plat-omap/fb-vram.c b/arch/arm/plat-omap/fb-vram.c
-new file mode 100644
-index 0000000..2994f8f
---- /dev/null
-+++ b/arch/arm/plat-omap/fb-vram.c
-@@ -0,0 +1,646 @@
-+/*
-+ * linux/arch/arm/plat-omap/fb-vram.c
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * Some code and ideas taken from drivers/video/omap/ driver
-+ * by Imre Deak.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+//#define DEBUG
-+
-+#include <linux/vmalloc.h>
-+#include <linux/kernel.h>
-+#include <linux/mm.h>
-+#include <linux/list.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/proc_fs.h>
-+#include <linux/seq_file.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/setup.h>
-+
-+#include <mach/sram.h>
-+#include <mach/omapfb.h>
-+
-+#ifdef DEBUG
-+#define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__)
-+#else
-+#define DBG(format, ...)
-+#endif
-+
-+#define OMAP2_SRAM_START		0x40200000
-+/* Maximum size, in reality this is smaller if SRAM is partially locked. */
-+#define OMAP2_SRAM_SIZE			0xa0000		/* 640k */
-+
-+#define REG_MAP_SIZE(_page_cnt)						\
-+	((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
-+#define REG_MAP_PTR(_rg, _page_nr)					\
-+	(((_rg)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
-+#define REG_MAP_MASK(_page_nr)						\
-+	(1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
-+
-+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-+
-+/* postponed regions are used to temporarily store region information at boot
-+ * time when we cannot yet allocate the region list */
-+#define MAX_POSTPONED_REGIONS 10
-+
-+static int postponed_cnt __initdata;
-+static struct {
-+	unsigned long paddr;
-+	size_t size;
-+} postponed_regions[MAX_POSTPONED_REGIONS] __initdata;
-+
-+struct vram_alloc {
-+	struct list_head list;
-+	unsigned long paddr;
-+	unsigned pages;
-+};
-+
-+struct vram_region {
-+	struct list_head list;
-+	struct list_head alloc_list;
-+	unsigned long	paddr;
-+	void		*vaddr;
-+	unsigned	pages;
-+	unsigned	dma_alloced:1;
-+};
-+
-+static DEFINE_MUTEX(region_mutex);
-+static LIST_HEAD(region_list);
-+
-+static inline int region_mem_type(unsigned long paddr)
-+{
-+	if (paddr >= OMAP2_SRAM_START &&
-+	    paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
-+		return OMAPFB_MEMTYPE_SRAM;
-+	else
-+		return OMAPFB_MEMTYPE_SDRAM;
-+}
-+
-+static struct vram_region *omap_vram_create_region(unsigned long paddr,
-+		void *vaddr, unsigned pages)
-+{
-+	struct vram_region *rm;
-+
-+	rm = kzalloc(sizeof(*rm), GFP_KERNEL);
-+
-+	if (rm) {
-+		INIT_LIST_HEAD(&rm->alloc_list);
-+		rm->paddr = paddr;
-+		rm->vaddr = vaddr;
-+		rm->pages = pages;
-+	}
-+
-+	return rm;
-+}
-+
-+static void omap_vram_free_region(struct vram_region *vr)
-+{
-+	list_del(&vr->list);
-+	kfree(vr);
-+}
-+
-+static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr,
-+		unsigned long paddr, unsigned pages)
-+{
-+	struct vram_alloc *va;
-+	struct vram_alloc *new;
-+
-+	new = kzalloc(sizeof(*va), GFP_KERNEL);
-+
-+	if (!new)
-+		return NULL;
-+
-+	new->paddr = paddr;
-+	new->pages = pages;
-+
-+	list_for_each_entry(va, &vr->alloc_list, list) {
-+		if (va->paddr > new->paddr)
-+			break;
-+	}
-+
-+	list_add_tail(&new->list, &va->list);
-+
-+	return new;
-+}
-+
-+static void omap_vram_free_allocation(struct vram_alloc *va)
-+{
-+	list_del(&va->list);
-+	kfree(va);
-+}
-+
-+static __init int omap_vram_add_region_postponed(unsigned long paddr, size_t size)
-+{
-+	if (postponed_cnt == MAX_POSTPONED_REGIONS)
-+		return -ENOMEM;
-+
-+	postponed_regions[postponed_cnt].paddr = paddr;
-+	postponed_regions[postponed_cnt].size = size;
-+
-+	++postponed_cnt;
-+
-+	return 0;
-+}
-+
-+/* add/remove_region can be exported if there's need to add/remove regions
-+ * runtime */
-+static int omap_vram_add_region(unsigned long paddr, size_t size)
-+{
-+	struct vram_region *rm;
-+	void *vaddr;
-+	unsigned pages;
-+
-+	DBG("adding region paddr %08lx size %d\n",
-+			paddr, size);
-+
-+	size &= PAGE_MASK;
-+	pages = size >> PAGE_SHIFT;
-+
-+	vaddr = ioremap_wc(paddr, size);
-+	if (vaddr == NULL)
-+		return -ENOMEM;
-+
-+	rm = omap_vram_create_region(paddr, vaddr, pages);
-+	if (rm == NULL) {
-+		iounmap(vaddr);
-+		return -ENOMEM;
-+	}
-+
-+	list_add(&rm->list, &region_list);
-+
-+	return 0;
-+}
-+
-+#if 0
-+int omap_vram_remove_region(unsigned long paddr)
-+{
-+	struct region *rm;
-+	unsigned i;
-+
-+	DBG("remove region paddr %08lx\n", paddr);
-+	list_for_each_entry(rm, &region_list, list)
-+		if (rm->paddr != paddr)
-+			continue;
-+
-+	if (rm->paddr != paddr)
-+		return -EINVAL;
-+
-+	for (i = 0; i < rm->page_cnt; i++)
-+		if (region_page_reserved(rm, i))
-+			return -EBUSY;
-+
-+	iounmap(rm->vaddr);
-+
-+	list_del(&rm->list);
-+
-+	kfree(rm);
-+
-+	return 0;
-+}
-+#endif
-+
-+int omap_vram_free(unsigned long paddr, void *vaddr, size_t size)
-+{
-+	struct vram_region *rm;
-+	struct vram_alloc *alloc;
-+	unsigned start, end;
-+
-+	DBG("free mem paddr %08lx vaddr %p size %d\n",
-+			paddr, vaddr, size);
-+
-+	size = PAGE_ALIGN(size);
-+
-+	mutex_lock(&region_mutex);
-+
-+	list_for_each_entry(rm, &region_list, list) {
-+		list_for_each_entry(alloc, &rm->alloc_list, list) {
-+			start = alloc->paddr;
-+			end = alloc->paddr + (alloc->pages >> PAGE_SHIFT);
-+
-+			if (start >= paddr && end < paddr + size)
-+				goto found;
-+		}
-+	}
-+
-+	mutex_unlock(&region_mutex);
-+	return -EINVAL;
-+
-+found:
-+	if (rm->dma_alloced) {
-+		DBG("freeing dma-alloced\n");
-+		dma_free_writecombine(NULL, size, vaddr, paddr);
-+		omap_vram_free_allocation(alloc);
-+		omap_vram_free_region(rm);
-+	} else {
-+		omap_vram_free_allocation(alloc);
-+	}
-+
-+	mutex_unlock(&region_mutex);
-+	return 0;
-+}
-+EXPORT_SYMBOL(omap_vram_free);
-+
-+#if 0
-+void *omap_vram_reserve(unsigned long paddr, size_t size)
-+{
-+
-+	struct region *rm;
-+	unsigned start_page;
-+	unsigned end_page;
-+	unsigned i;
-+	void *vaddr;
-+
-+	size = PAGE_ALIGN(size);
-+
-+	rm = region_find_region(paddr, size);
-+
-+	DBG("reserve mem paddr %08lx size %d\n",
-+			paddr, size);
-+
-+	BUG_ON(rm == NULL);
-+
-+	start_page = (paddr - rm->paddr) >> PAGE_SHIFT;
-+	end_page = start_page + (size >> PAGE_SHIFT);
-+	for (i = start_page; i < end_page; i++)
-+		region_reserve_page(rm, i);
-+
-+	vaddr = rm->vaddr + (start_page << PAGE_SHIFT);
-+
-+	return vaddr;
-+}
-+EXPORT_SYMBOL(omap_vram_reserve);
-+#endif
-+static void *_omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
-+{
-+	struct vram_region *rm;
-+	struct vram_alloc *alloc;
-+	void *vaddr;
-+
-+	list_for_each_entry(rm, &region_list, list) {
-+		unsigned long start, end;
-+
-+		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
-+
-+		if (region_mem_type(rm->paddr) != mtype)
-+			continue;
-+
-+		start = rm->paddr;
-+
-+		list_for_each_entry(alloc, &rm->alloc_list, list) {
-+			end = alloc->paddr;
-+
-+			if (end - start >= pages << PAGE_SHIFT)
-+				goto found;
-+
-+			start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
-+		}
-+
-+		end = rm->paddr + (rm->pages << PAGE_SHIFT);
-+found:
-+		if (end - start < pages << PAGE_SHIFT)
-+			continue;
-+
-+		DBG("FOUND %lx, end %lx\n", start, end);
-+
-+		if (omap_vram_create_allocation(rm, start, pages) == NULL)
-+			return NULL;
-+
-+		*paddr = start;
-+		vaddr = rm->vaddr + (start - rm->paddr);
-+
-+		return vaddr;
-+	}
-+
-+	return NULL;
-+}
-+
-+static void *_omap_vram_alloc_dma(unsigned pages, unsigned long *paddr)
-+{
-+	struct vram_region *rm;
-+	void *vaddr;
-+
-+	vaddr = dma_alloc_writecombine(NULL, pages << PAGE_SHIFT,
-+			(dma_addr_t *)paddr, GFP_KERNEL);
-+
-+	if (vaddr == NULL)
-+		return NULL;
-+
-+	rm = omap_vram_create_region(*paddr, vaddr, pages);
-+	if (rm == NULL) {
-+		dma_free_writecombine(NULL, pages << PAGE_SHIFT, vaddr,
-+				(dma_addr_t)*paddr);
-+		return NULL;
-+	}
-+
-+	rm->dma_alloced = 1;
-+
-+	if (omap_vram_create_allocation(rm, *paddr, pages) == NULL) {
-+		dma_free_writecombine(NULL, pages << PAGE_SHIFT, vaddr,
-+				(dma_addr_t)*paddr);
-+		kfree(rm);
-+		return NULL;
-+	}
-+
-+	list_add(&rm->list, &region_list);
-+
-+	return vaddr;
-+}
-+
-+void *omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
-+{
-+	void *vaddr;
-+	unsigned pages;
-+
-+	BUG_ON(mtype > OMAPFB_MEMTYPE_MAX || !size);
-+
-+	DBG("alloc mem type %d size %d\n", mtype, size);
-+
-+	size = PAGE_ALIGN(size);
-+	pages = size >> PAGE_SHIFT;
-+
-+	mutex_lock(&region_mutex);
-+
-+	vaddr = _omap_vram_alloc(mtype, pages, paddr);
-+
-+	if (vaddr == NULL && mtype == OMAPFB_MEMTYPE_SDRAM) {
-+		DBG("fallback to dma_alloc\n");
-+
-+		vaddr = _omap_vram_alloc_dma(pages, paddr);
-+	}
-+
-+	mutex_unlock(&region_mutex);
-+
-+	return vaddr;
-+}
-+EXPORT_SYMBOL(omap_vram_alloc);
-+
-+#ifdef CONFIG_PROC_FS
-+static void *r_next(struct seq_file *m, void *v, loff_t *pos)
-+{
-+	struct list_head *l = v;
-+
-+	(*pos)++;
-+
-+	if (list_is_last(l, &region_list))
-+		return 0;
-+
-+	return l->next;
-+}
-+
-+static void *r_start(struct seq_file *m, loff_t *pos)
-+{
-+	loff_t p = *pos;
-+	struct list_head *l = &region_list;
-+
-+	mutex_lock(&region_mutex);
-+
-+	do {
-+		l = l->next;
-+		if (l == &region_list)
-+			return NULL;
-+	} while (p--);
-+
-+	return l;
-+}
-+
-+static void r_stop(struct seq_file *m, void *v)
-+{
-+	mutex_unlock(&region_mutex);
-+}
-+
-+static int r_show(struct seq_file *m, void *v)
-+{
-+	struct vram_region *vr;
-+	struct vram_alloc *va;
-+	unsigned size;
-+
-+	vr = list_entry(v, struct vram_region, list);
-+
-+	size = vr->pages << PAGE_SHIFT;
-+	seq_printf(m, "%08lx-%08lx v:%p-%p (%d bytes) %s\n",
-+			vr->paddr, vr->paddr + size,
-+			vr->vaddr, vr->vaddr + size,
-+			size,
-+			vr->dma_alloced ? "dma_alloc" : "");
-+
-+	list_for_each_entry(va, &vr->alloc_list, list) {
-+		size = va->pages << PAGE_SHIFT;
-+		seq_printf(m, "    %08lx-%08lx (%d bytes)\n",
-+				va->paddr, va->paddr + size,
-+				size);
-+	}
-+
-+
-+
-+	return 0;
-+}
-+
-+static const struct seq_operations resource_op = {
-+	.start	= r_start,
-+	.next	= r_next,
-+	.stop	= r_stop,
-+	.show	= r_show,
-+};
-+
-+static int vram_open(struct inode *inode, struct file *file)
-+{
-+	return seq_open(file, &resource_op);
-+}
-+
-+static const struct file_operations proc_vram_operations = {
-+	.open		= vram_open,
-+	.read		= seq_read,
-+	.llseek		= seq_lseek,
-+	.release	= seq_release,
-+};
-+
-+static int __init omap_vram_create_proc(void)
-+{
-+	proc_create("omap-vram", 0, NULL, &proc_vram_operations);
-+
-+	return 0;
-+}
-+#endif
-+
-+static __init int omap_vram_init(void)
-+{
-+	int i, r;
-+
-+	for (i = 0; i < postponed_cnt; i++)
-+		omap_vram_add_region(postponed_regions[i].paddr,
-+				postponed_regions[i].size);
-+
-+#ifdef CONFIG_PROC_FS
-+	r = omap_vram_create_proc();
-+	if (r)
-+		return -ENOMEM;
-+#endif
-+
-+	return 0;
-+}
-+
-+arch_initcall(omap_vram_init);
-+
-+/* boottime vram alloc stuff */
-+static u32 omapfb_sram_vram_start __initdata;
-+static u32 omapfb_sram_vram_size __initdata;
-+
-+static u32 omapfb_sdram_vram_start __initdata;
-+static u32 omapfb_sdram_vram_size __initdata;
-+
-+static u32 omapfb_def_sdram_vram_size __initdata;
-+
-+static void __init omapfb_early_vram(char **p)
-+{
-+	unsigned long size;
-+	size  = memparse(*p, p);
-+	omapfb_def_sdram_vram_size = size;
-+}
-+__early_param("vram=", omapfb_early_vram);
-+
-+/*
-+ * Called from map_io. We need to call to this early enough so that we
-+ * can reserve the fixed SDRAM regions before VM could get hold of them.
-+ */
-+void __init omapfb_reserve_sdram(void)
-+{
-+	struct bootmem_data	*bdata;
-+	unsigned long		sdram_start, sdram_size;
-+	unsigned long		reserved;
-+	u32 paddr;
-+	u32 size;
-+
-+	bdata = NODE_DATA(0)->bdata;
-+	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
-+	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
-+	reserved = 0;
-+
-+	/* cmdline arg overrides the board file definition */
-+	if (omapfb_def_sdram_vram_size) {
-+		size = omapfb_def_sdram_vram_size;
-+		paddr = 0;
-+	} else {
-+		size = omapfb_sdram_vram_size;
-+		paddr = omapfb_sdram_vram_start;
-+	}
-+
-+	if (size) {
-+		if (paddr) {
-+			if (paddr < sdram_start ||
-+					paddr + size > sdram_start + sdram_size) {
-+				printk(KERN_ERR "Illegal SDRAM region for VRAM\n");
-+				return;
-+			}
-+
-+			reserve_bootmem(paddr, size, BOOTMEM_DEFAULT);
-+		} else {
-+			if (size > sdram_size) {
-+				printk(KERN_ERR "Illegal SDRAM size for VRAM\n");
-+				return;
-+			}
-+
-+			paddr = virt_to_phys(alloc_bootmem(size));
-+		}
-+
-+		reserved += size;
-+		omap_vram_add_region_postponed(paddr, size);
-+	}
-+
-+	if (reserved)
-+		pr_info("Reserving %lu bytes SDRAM for VRAM\n", reserved);
-+}
-+
-+/*
-+ * Called at sram init time, before anything is pushed to the SRAM stack.
-+ * Because of the stack scheme, we will allocate everything from the
-+ * start of the lowest address region to the end of SRAM. This will also
-+ * include padding for page alignment and possible holes between regions.
-+ *
-+ * As opposed to the SDRAM case, we'll also do any dynamic allocations at
-+ * this point, since the driver built as a module would have problem with
-+ * freeing / reallocating the regions.
-+ */
-+unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
-+				  unsigned long sram_vstart,
-+				  unsigned long sram_size,
-+				  unsigned long pstart_avail,
-+				  unsigned long size_avail)
-+{
-+	unsigned long			pend_avail;
-+	unsigned long			reserved;
-+	u32 paddr;
-+	u32 size;
-+
-+	paddr = omapfb_sram_vram_start;
-+	size = omapfb_sram_vram_size;
-+
-+	reserved = 0;
-+	pend_avail = pstart_avail + size_avail;
-+
-+
-+	if (!paddr) {
-+		/* Dynamic allocation */
-+		if ((size_avail & PAGE_MASK) < size) {
-+			printk(KERN_ERR "Not enough SRAM for VRAM\n");
-+			return 0;
-+		}
-+		size_avail = (size_avail - size) & PAGE_MASK;
-+		paddr = pstart_avail + size_avail;
-+	}
-+
-+	if (paddr < sram_pstart ||
-+			paddr + size > sram_pstart + sram_size) {
-+		printk(KERN_ERR "Illegal SRAM region for VRAM\n");
-+		return 0;
-+	}
-+
-+	/* Reserve everything above the start of the region. */
-+	if (pend_avail - paddr > reserved)
-+		reserved = pend_avail - paddr;
-+	size_avail = pend_avail - reserved - pstart_avail;
-+
-+	/*
-+	 * We have a kernel mapping for this already, so the
-+	 * driver won't have to make one.
-+	 */
-+	/* XXX do we need the vaddr? */
-+	/* rg.vaddr = (void *)(sram_vstart + paddr - sram_pstart); */
-+
-+	omap_vram_add_region_postponed(paddr, size);
-+
-+	if (reserved)
-+		pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
-+
-+	return reserved;
-+}
-+
-+void __init omap2_set_sdram_vram(u32 size, u32 start)
-+{
-+	omapfb_sdram_vram_start = start;
-+	omapfb_sdram_vram_size = size;
-+}
-+
-+void __init omap2_set_sram_vram(u32 size, u32 start)
-+{
-+	omapfb_sram_vram_start = start;
-+	omapfb_sram_vram_size = size;
-+}
-+
-+#endif
-+
-diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
-index 3746222..ee2cc6f 100644
---- a/arch/arm/plat-omap/fb.c
-+++ b/arch/arm/plat-omap/fb.c
-@@ -327,6 +327,28 @@ static inline int omap_init_fb(void)
- 
- arch_initcall(omap_init_fb);
- 
-+#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-+
-+static u64 omap_fb_dma_mask = ~(u32)0;
-+
-+static struct platform_device omap_fb_device = {
-+	.name		= "omapfb",
-+	.id		= -1,
-+	.dev = {
-+		.dma_mask		= &omap_fb_dma_mask,
-+		.coherent_dma_mask	= ~(u32)0,
-+		.platform_data		= NULL,
-+	},
-+	.num_resources = 0,
-+};
-+
-+static inline int omap_init_fb(void)
-+{
-+	return platform_device_register(&omap_fb_device);
-+}
-+
-+arch_initcall(omap_init_fb);
-+
- #else
- 
- void omapfb_reserve_sdram(void) {}
-diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
-index b226bdf..0800f92 100644
---- a/arch/arm/plat-omap/include/mach/omapfb.h
-+++ b/arch/arm/plat-omap/include/mach/omapfb.h
-@@ -90,6 +90,13 @@ enum omapfb_color_format {
- 	OMAPFB_COLOR_CLUT_1BPP,
- 	OMAPFB_COLOR_RGB444,
- 	OMAPFB_COLOR_YUY422,
-+
-+	OMAPFB_COLOR_ARGB16,
-+	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
-+	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
-+	OMAPFB_COLOR_ARGB32,
-+	OMAPFB_COLOR_RGBA32,
-+	OMAPFB_COLOR_RGBX32,
- };
- 
- struct omapfb_update_window {
-@@ -393,6 +400,13 @@ extern int  omapfb_update_window_async(struct fb_info *fbi,
- /* in arch/arm/plat-omap/fb.c */
- extern void omapfb_set_ctrl_platform_data(void *pdata);
- 
-+/* in arch/arm/plat-omap/fb-vram */
-+int omap_vram_free(unsigned long paddr, void *vaddr, size_t size);
-+void *omap_vram_reserve(unsigned long paddr, size_t size);
-+void *omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
-+extern void omap2_set_sdram_vram(u32 size, u32 start);
-+extern void omap2_set_sram_vram(u32 size, u32 start);
-+
- #endif /* __KERNEL__ */
- 
- #endif /* __OMAPFB_H */
-diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
-index 3f3ce13..689a3b1 100644
---- a/drivers/video/Kconfig
-+++ b/drivers/video/Kconfig
-@@ -2116,6 +2116,7 @@ config FB_PRE_INIT_FB
- 	  the bootloader.
- 
- source "drivers/video/omap/Kconfig"
-+source "drivers/video/omap2/Kconfig"
- 
- source "drivers/video/backlight/Kconfig"
- source "drivers/video/display/Kconfig"
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index e39e33e..3d9d50e 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_SM501)            += sm501fb.o
- obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
- obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
- obj-$(CONFIG_FB_OMAP)             += omap/
-+obj-$(CONFIG_OMAP2_DSS)           += omap2/
- obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
- obj-$(CONFIG_FB_CARMINE)          += carminefb.o
- obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
-diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
-index c355b59..541fab3 100644
---- a/drivers/video/omap/Kconfig
-+++ b/drivers/video/omap/Kconfig
-@@ -1,6 +1,7 @@
- config FB_OMAP
- 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
--	depends on FB && ARCH_OMAP
-+	depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
-+
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-@@ -80,7 +81,7 @@ config FB_OMAP_BOOTLOADER_INIT
- 
- config FB_OMAP_CONSISTENT_DMA_SIZE
- 	int "Consistent DMA memory size (MB)"
--	depends on FB_OMAP
-+	depends on FB && ARCH_OMAP
- 	range 1 14
- 	default 2
- 	help
-diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
-new file mode 100644
-index 0000000..8be51a3
---- /dev/null
-+++ b/drivers/video/omap2/Kconfig
-@@ -0,0 +1,42 @@
-+config FB_OMAP2
-+        tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)"
-+        depends on FB && OMAP2_DSS
-+
-+        select FB_CFB_FILLRECT
-+        select FB_CFB_COPYAREA
-+        select FB_CFB_IMAGEBLIT
-+        help
-+          Frame buffer driver for OMAP2/3 based boards.
-+
-+config FB_OMAP2_DEBUG
-+	bool "Debug support for OMAP2/3 FB"
-+	default y
-+	depends on FB_OMAP2
-+	help
-+	  Support for debug output. You have to enable the actual printing
-+	  with debug module parameter.
-+
-+config FB_OMAP2_FORCE_AUTO_UPDATE
-+	bool "Force main display to automatic update mode"
-+	depends on FB_OMAP2
-+	help
-+	  Forces main display to automatic update mode (if possible),
-+	  and also enables tearsync (if possible). By default
-+	  displays that support manual update are started in manual
-+	  update mode.
-+
-+config FB_OMAP2_NUM_FBS
-+	int "Number of framebuffers"
-+	range 1 10
-+	default 3
-+	depends on FB_OMAP2
-+	help
-+	  Select the number of framebuffers created. OMAP2/3 has 3 overlays
-+	  so normally this would be 3.
-+
-+menu "OMAP2/3 Display Device Drivers"
-+        depends on OMAP2_DSS
-+
-+
-+endmenu
-+
-diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
-new file mode 100644
-index 0000000..51c2e00
---- /dev/null
-+++ b/drivers/video/omap2/Makefile
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_FB_OMAP2) += omapfb.o
-+omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
-diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c
-new file mode 100644
-index 0000000..1f0f044
---- /dev/null
-+++ b/drivers/video/omap2/omapfb-ioctl.c
-@@ -0,0 +1,464 @@
-+/*
-+ * linux/drivers/video/omap2/omapfb-ioctl.c
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * Some code and ideas taken from drivers/video/omap/ driver
-+ * by Imre Deak.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/fb.h>
-+#include <linux/device.h>
-+#include <linux/uaccess.h>
-+#include <linux/platform_device.h>
-+#include <linux/mm.h>
-+
-+#include <mach/display.h>
-+#include <mach/omapfb.h>
-+
-+#include "omapfb.h"
-+
-+static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+	struct omap_overlay *ovl;
-+	int r = 0;
-+
-+	DBG("omapfb_setup_plane\n");
-+
-+	omapfb_lock(fbdev);
-+
-+	if (ofbi->num_overlays != 1) {
-+		r = -EINVAL;
-+		goto out;
-+	}
-+
-+	/* XXX uses only the first overlay */
-+	ovl = ofbi->overlays[0];
-+
-+	if (pi->enabled && !ofbi->region.size) {
-+		/*
-+		 * This plane's memory was freed, can't enable it
-+		 * until it's reallocated.
-+		 */
-+		r = -EINVAL;
-+		goto out;
-+	}
-+
-+	if (pi->enabled) {
-+		r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
-+				pi->out_width, pi->out_height);
-+		if (r)
-+			goto out;
-+	}
-+
-+	r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
-+			pi->out_width, pi->out_height);
-+	if (r)
-+		goto out;
-+
-+	ovl->enable(ovl, pi->enabled);
-+
-+	if (ovl->manager)
-+		ovl->manager->apply(ovl->manager);
-+
-+	if (display) {
-+		if (display->sync)
-+			display->sync(display);
-+
-+		if (display->update)
-+			display->update(display, 0, 0,
-+					display->panel->timings.x_res,
-+					display->panel->timings.y_res);
-+	}
-+
-+out:
-+	omapfb_unlock(fbdev);
-+	if (r)
-+		dev_err(fbdev->dev, "setup_plane failed\n");
-+	return r;
-+}
-+
-+static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+
-+	omapfb_lock(fbdev);
-+
-+	if (ofbi->num_overlays != 1) {
-+		memset(pi, 0, sizeof(*pi));
-+	} else {
-+		struct omap_overlay_info *ovli;
-+		struct omap_overlay *ovl;
-+
-+		ovl = ofbi->overlays[0];
-+		ovli = &ovl->info;
-+
-+		pi->pos_x = ovli->pos_x;
-+		pi->pos_y = ovli->pos_y;
-+		pi->enabled = ovli->enabled;
-+		pi->channel_out = 0; /* xxx */
-+		pi->mirror = 0;
-+		pi->out_width = ovli->out_width;
-+		pi->out_height = ovli->out_height;
-+	}
-+
-+	omapfb_unlock(fbdev);
-+
-+	return 0;
-+}
-+
-+static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omapfb_mem_region *rg;
-+	struct omap_display *display = fb2display(fbi);
-+	int r, i;
-+	size_t size;
-+
-+	if (mi->type > OMAPFB_MEMTYPE_MAX)
-+		return -EINVAL;
-+
-+	size = PAGE_ALIGN(mi->size);
-+
-+	rg = &ofbi->region;
-+
-+	omapfb_lock(fbdev);
-+
-+	for (i = 0; i < ofbi->num_overlays; i++) {
-+		if (ofbi->overlays[i]->info.enabled) {
-+			r = -EBUSY;
-+			goto out;
-+		}
-+	}
-+
-+	if (rg->size != size || rg->type != mi->type) {
-+		struct fb_var_screeninfo new_var;
-+		unsigned long old_size = rg->size;
-+
-+		if (display->sync)
-+			display->sync(display);
-+
-+		r = omapfb_realloc_fbmem(fbdev, ofbi->id, size);
-+		if (r)
-+			goto out;
-+
-+		if (old_size != size) {
-+			if (size) {
-+				memcpy(&new_var, &fbi->var, sizeof(new_var));
-+				r = check_fb_var(fbi, &new_var);
-+				if (r < 0)
-+					goto out;
-+				memcpy(&fbi->var, &new_var, sizeof(fbi->var));
-+				set_fb_fix(fbi);
-+			} else {
-+				/*
-+				 * Set these explicitly to indicate that the
-+				 * plane memory is dealloce'd, the other
-+				 * screen parameters in var / fix are invalid.
-+				 */
-+				fbi->fix.smem_start = 0;
-+				fbi->fix.smem_len = 0;
-+			}
-+		}
-+	}
-+
-+	r = 0;
-+out:
-+	omapfb_unlock(fbdev);
-+
-+	return r;
-+}
-+
-+static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omapfb_mem_region *rg;
-+
-+	rg = &ofbi->region;
-+	memset(mi, 0, sizeof(*mi));
-+
-+	omapfb_lock(fbdev);
-+	mi->size = rg->size;
-+	mi->type = rg->type;
-+	omapfb_unlock(fbdev);
-+
-+	return 0;
-+}
-+
-+static int omapfb_update_window(struct fb_info *fbi,
-+		u32 x, u32 y, u32 w, u32 h)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+
-+	if (!display)
-+		return 0;
-+
-+	if (w == 0 || h == 0)
-+		return 0;
-+
-+	if (x + w > display->panel->timings.x_res ||
-+			y + h > display->panel->timings.y_res)
-+		return -EINVAL;
-+
-+	omapfb_lock(fbdev);
-+	display->update(display, x, y, w, h);
-+	omapfb_unlock(fbdev);
-+
-+	return 0;
-+}
-+
-+static int omapfb_set_update_mode(struct fb_info *fbi,
-+				   enum omapfb_update_mode mode)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+	enum omap_dss_update_mode um;
-+	int r;
-+
-+	if (!display || !display->set_update_mode)
-+		return -EINVAL;
-+
-+	switch (mode) {
-+	case OMAPFB_UPDATE_DISABLED:
-+		um = OMAP_DSS_UPDATE_DISABLED;
-+		break;
-+
-+	case OMAPFB_AUTO_UPDATE:
-+		um = OMAP_DSS_UPDATE_AUTO;
-+		break;
-+
-+	case OMAPFB_MANUAL_UPDATE:
-+		um = OMAP_DSS_UPDATE_MANUAL;
-+		break;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	omapfb_lock(fbdev);
-+	r = display->set_update_mode(display, um);
-+	omapfb_unlock(fbdev);
-+
-+	return r;
-+}
-+
-+static int omapfb_get_update_mode(struct fb_info *fbi,
-+		enum omapfb_update_mode *mode)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+	enum omap_dss_update_mode m;
-+
-+	if (!display || !display->get_update_mode)
-+		return -EINVAL;
-+
-+	omapfb_lock(fbdev);
-+	m = display->get_update_mode(display);
-+	omapfb_unlock(fbdev);
-+
-+	switch (m) {
-+	case OMAP_DSS_UPDATE_DISABLED:
-+		*mode = OMAPFB_UPDATE_DISABLED;
-+		break;
-+	case OMAP_DSS_UPDATE_AUTO:
-+		*mode = OMAPFB_AUTO_UPDATE;
-+		break;
-+	case OMAP_DSS_UPDATE_MANUAL:
-+		*mode = OMAPFB_MANUAL_UPDATE;
-+		break;
-+	default:
-+		BUG();
-+	}
-+
-+	return 0;
-+}
-+
-+int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+
-+	union {
-+		struct omapfb_update_window_old	uwnd_o;
-+		struct omapfb_update_window	uwnd;
-+		struct omapfb_plane_info	plane_info;
-+		struct omapfb_caps		caps;
-+		struct omapfb_mem_info          mem_info;
-+		enum omapfb_update_mode		update_mode;
-+		int test_num;
-+	} p;
-+
-+	int r = 0;
-+
-+	DBG("ioctl %x (%d)\n", cmd, cmd & 0xff);
-+
-+	switch (cmd) {
-+	case OMAPFB_SYNC_GFX:
-+		if (!display || !display->sync) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		omapfb_lock(fbdev);
-+		r = display->sync(display);
-+		omapfb_unlock(fbdev);
-+		break;
-+
-+	case OMAPFB_UPDATE_WINDOW_OLD:
-+		if (!display || !display->update) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		if (copy_from_user(&p.uwnd_o,
-+					(void __user *)arg,
-+					sizeof(p.uwnd_o))) {
-+			r = -EFAULT;
-+			break;
-+		}
-+
-+		r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y,
-+				p.uwnd_o.width, p.uwnd_o.height);
-+		break;
-+
-+	case OMAPFB_UPDATE_WINDOW:
-+		if (!display || !display->update) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		if (copy_from_user(&p.uwnd, (void __user *)arg,
-+					sizeof(p.uwnd))) {
-+			r = -EFAULT;
-+			break;
-+		}
-+
-+		r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y,
-+				p.uwnd.width, p.uwnd.height);
-+		break;
-+
-+	case OMAPFB_SETUP_PLANE:
-+		if (copy_from_user(&p.plane_info, (void __user *)arg,
-+					sizeof(p.plane_info)))
-+			r = -EFAULT;
-+		else
-+			r = omapfb_setup_plane(fbi, &p.plane_info);
-+		break;
-+
-+	case OMAPFB_QUERY_PLANE:
-+		r = omapfb_query_plane(fbi, &p.plane_info);
-+		if (r < 0)
-+			break;
-+		if (copy_to_user((void __user *)arg, &p.plane_info,
-+					sizeof(p.plane_info)))
-+			r = -EFAULT;
-+		break;
-+
-+	case OMAPFB_SETUP_MEM:
-+		if (copy_from_user(&p.mem_info, (void __user *)arg,
-+					sizeof(p.mem_info)))
-+			r = -EFAULT;
-+		else
-+			r = omapfb_setup_mem(fbi, &p.mem_info);
-+		break;
-+
-+	case OMAPFB_QUERY_MEM:
-+		r = omapfb_query_mem(fbi, &p.mem_info);
-+		if (r < 0)
-+			break;
-+		if (copy_to_user((void __user *)arg, &p.mem_info,
-+					sizeof(p.mem_info)))
-+			r = -EFAULT;
-+		break;
-+
-+	case OMAPFB_GET_CAPS:
-+		if (!display) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		p.caps.ctrl = display->caps;
-+
-+		if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps)))
-+			r = -EFAULT;
-+		break;
-+
-+	case OMAPFB_SET_UPDATE_MODE:
-+		if (get_user(p.update_mode, (int __user *)arg))
-+			r = -EFAULT;
-+		else
-+			r = omapfb_set_update_mode(fbi, p.update_mode);
-+		break;
-+
-+	case OMAPFB_GET_UPDATE_MODE:
-+		r = omapfb_get_update_mode(fbi, &p.update_mode);
-+		if (r)
-+			break;
-+		if (put_user(p.update_mode,
-+					(enum omapfb_update_mode __user *)arg))
-+			r = -EFAULT;
-+		break;
-+
-+	/* LCD and CTRL tests do the same thing for backward
-+	 * compatibility */
-+	case OMAPFB_LCD_TEST:
-+		if (get_user(p.test_num, (int __user *)arg)) {
-+			r = -EFAULT;
-+			break;
-+		}
-+		if (!display || !display->run_test) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		r = display->run_test(display, p.test_num);
-+
-+		break;
-+
-+	case OMAPFB_CTRL_TEST:
-+		if (get_user(p.test_num, (int __user *)arg)) {
-+			r = -EFAULT;
-+			break;
-+		}
-+		if (!display || !display->run_test) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		r = display->run_test(display, p.test_num);
-+
-+		break;
-+
-+	default:
-+		DBG("ioctl unhandled\n");
-+		r = -EINVAL;
-+	}
-+
-+	return r;
-+}
-+
-+
-diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c
-new file mode 100644
-index 0000000..76bd416
---- /dev/null
-+++ b/drivers/video/omap2/omapfb-main.c
-@@ -0,0 +1,1441 @@
-+/*
-+ * linux/drivers/video/omap2/omapfb-main.c
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * Some code and ideas taken from drivers/video/omap/ driver
-+ * by Imre Deak.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+#include <linux/fb.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/vmalloc.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+
-+#include <mach/display.h>
-+#include <mach/omapfb.h>
-+
-+#include "omapfb.h"
-+
-+#define MODULE_NAME     "omapfb"
-+
-+static char *def_mode;
-+static char *def_vram;
-+
-+#ifdef DEBUG
-+unsigned int omapfb_debug;
-+module_param_named(debug, omapfb_debug, bool, 0644);
-+#endif
-+
-+#ifdef DEBUG
-+static void fill_fb(void *addr, struct fb_info *fbi)
-+{
-+	struct fb_var_screeninfo *var = &fbi->var;
-+
-+	const short w = var->xres_virtual;
-+	const short h = var->yres_virtual;
-+
-+	int y, x;
-+	u8 *p = addr;
-+
-+	for (y = 0; y < h; y++) {
-+		for (x = 0; x < w; x++) {
-+			if (var->bits_per_pixel == 16) {
-+				u16 *pw = (u16 *)p;
-+
-+				if (x < 20 && y < 20)
-+					*pw = 0xffff;
-+				else if (x == 20 || x == w - 20 ||
-+						y == 20 || y == h - 20)
-+					*pw = 0xffff;
-+				else if (x == y || w - x == h - y)
-+					*pw = ((1<<5)-1)<<11;
-+				else if (w - x == y || x == h - y)
-+					*pw = ((1<<6)-1)<<5;
-+				else {
-+					int t = x / (w/3);
-+					if (t == 0)
-+						*pw = y % 32;
-+					else if (t == 1)
-+						*pw = (y % 64) << 5;
-+					else if (t == 2)
-+						*pw = (y % 32) << 11;
-+				}
-+			} else if (var->bits_per_pixel == 24) {
-+				u8 *pb = (u8 *)p;
-+
-+				int r = 0, g = 0, b = 0;
-+
-+				if (x < 20 && y < 20)
-+					r = g = b = 0xff;
-+				else if (x == 20 || x == w - 20 ||
-+						y == 20 || y == h - 20)
-+					r = g = b = 0xff;
-+				else if (x == y || w - x == h - y)
-+					r = 0xff;
-+				else if (w - x == y || x == h - y)
-+					g = 0xff;
-+				else {
-+					int q = x / (w / 3);
-+					u8 base = 255 - (y % 256);
-+					if (q == 0)
-+						r = base;
-+					else if (q == 1)
-+						g = base;
-+					else if (q == 2)
-+						b = base;
-+				}
-+
-+				pb[0] = b;
-+				pb[1] = g;
-+				pb[2] = r;
-+
-+			} else if (var->bits_per_pixel == 32) {
-+				u32 *pd = (u32 *)p;
-+
-+				if (x < 20 && y < 20)
-+					*pd = 0xffffff;
-+				else if (x == 20 || x == w - 20 ||
-+						y == 20 || y == h - 20)
-+					*pd = 0xffffff;
-+				else if (x == y || w - x == h - y)
-+					*pd = 0xff0000;
-+				else if (w - x == y || x == h - y)
-+					*pd = 0x00ff00;
-+				else {
-+					u8 base = 255 - (y % 256);
-+					*pd = base << ((x / (w/3)) << 3);
-+				}
-+			}
-+
-+			p += var->bits_per_pixel >> 3;
-+		}
-+	}
-+}
-+#endif
-+
-+static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var)
-+{
-+	switch (var->nonstd) {
-+	case 0:
-+		break;
-+	case OMAPFB_COLOR_YUV422:
-+		return OMAP_DSS_COLOR_UYVY;
-+
-+	case OMAPFB_COLOR_YUY422:
-+		return OMAP_DSS_COLOR_YUV2;
-+
-+	case OMAPFB_COLOR_ARGB16:
-+		return OMAP_DSS_COLOR_ARGB16;
-+
-+	case OMAPFB_COLOR_ARGB32:
-+		return OMAP_DSS_COLOR_ARGB32;
-+
-+	case OMAPFB_COLOR_RGBA32:
-+		return OMAP_DSS_COLOR_RGBA32;
-+
-+	case OMAPFB_COLOR_RGBX32:
-+		return OMAP_DSS_COLOR_RGBX32;
-+
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	switch (var->bits_per_pixel) {
-+	case 1:
-+		return OMAP_DSS_COLOR_CLUT1;
-+	case 2:
-+		return OMAP_DSS_COLOR_CLUT2;
-+	case 4:
-+		return OMAP_DSS_COLOR_CLUT4;
-+	case 8:
-+		return OMAP_DSS_COLOR_CLUT8;
-+	case 12:
-+		return OMAP_DSS_COLOR_RGB12U;
-+	case 16:
-+		return OMAP_DSS_COLOR_RGB16;
-+	case 24:
-+		return OMAP_DSS_COLOR_RGB24P;
-+	case 32:
-+		return OMAP_DSS_COLOR_RGB24U;
-+	default:
-+		return -EINVAL;
-+	}
-+
-+	return -EINVAL;
-+}
-+
-+void set_fb_fix(struct fb_info *fbi)
-+{
-+	struct fb_fix_screeninfo *fix = &fbi->fix;
-+	struct fb_var_screeninfo *var = &fbi->var;
-+	struct omapfb_mem_region *rg = &FB2OFB(fbi)->region;
-+
-+	DBG("set_fb_fix\n");
-+
-+	/* used by open/write in fbmem.c */
-+	fbi->screen_base        = (char __iomem *)rg->vaddr;
-+
-+	/* used by mmap in fbmem.c */
-+	fix->smem_start         = rg->paddr;
-+	fix->smem_len           = rg->size;
-+
-+	fix->type = FB_TYPE_PACKED_PIXELS;
-+
-+	if (var->nonstd)
-+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
-+	else {
-+		switch (var->bits_per_pixel) {
-+		case 32:
-+		case 24:
-+		case 16:
-+		case 12:
-+			fix->visual = FB_VISUAL_TRUECOLOR;
-+			/* 12bpp is stored in 16 bits */
-+			break;
-+		case 1:
-+		case 2:
-+		case 4:
-+		case 8:
-+			fix->visual = FB_VISUAL_PSEUDOCOLOR;
-+			break;
-+		}
-+	}
-+
-+	fix->accel = FB_ACCEL_NONE;
-+	fix->line_length = (var->xres_virtual * var->bits_per_pixel) >> 3;
-+
-+	fix->xpanstep = 1;
-+	fix->ypanstep = 1;
-+}
-+
-+/* check new var and possibly modify it to be ok */
-+int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omap_display *display = fb2display(fbi);
-+	unsigned long max_frame_size;
-+	unsigned long line_size;
-+	int xres_min, xres_max;
-+	int yres_min, yres_max;
-+	enum omap_color_mode mode = 0;
-+	struct omap_overlay *ovl;
-+
-+	DBG("check_fb_var %d\n", ofbi->id);
-+
-+	if (ofbi->region.size == 0) {
-+		memset(var, 0, sizeof(*var));
-+		return 0;
-+	}
-+
-+	if (ofbi->num_overlays == 0) {
-+		dev_err(ofbi->fbdev->dev, "no overlays, aborting\n");
-+		return -EINVAL;
-+	}
-+
-+	/* XXX: uses the first overlay */
-+	ovl = ofbi->overlays[0];
-+
-+	/* if we are using non standard mode, fix the bpp first */
-+	switch (var->nonstd) {
-+	case 0:
-+		break;
-+	case OMAPFB_COLOR_YUV422:
-+	case OMAPFB_COLOR_YUY422:
-+	case OMAPFB_COLOR_ARGB16:
-+		var->bits_per_pixel = 16;
-+		break;
-+	case OMAPFB_COLOR_ARGB32:
-+	case OMAPFB_COLOR_RGBA32:
-+	case OMAPFB_COLOR_RGBX32:
-+		var->bits_per_pixel = 32;
-+		break;
-+	default:
-+		DBG("invalid nonstd mode\n");
-+		return -EINVAL;
-+	}
-+
-+	mode = fb_mode_to_dss_mode(var);
-+	if (mode < 0) {
-+		DBG("cannot convert var to omap dss mode\n");
-+		return -EINVAL;
-+	}
-+
-+	if ((ovl->supported_modes & mode) == 0) {
-+		DBG("invalid mode\n");
-+		return -EINVAL;
-+	}
-+
-+	xres_min = OMAPFB_PLANE_XRES_MIN;
-+	xres_max = (display ? display->panel->timings.x_res : 2048) - ovl->info.pos_x;
-+	yres_min = OMAPFB_PLANE_YRES_MIN;
-+	yres_max = (display ? display->panel->timings.y_res : 2048) - ovl->info.pos_y;
-+
-+	if (var->xres < xres_min)
-+		var->xres = xres_min;
-+	if (var->yres < yres_min)
-+		var->yres = yres_min;
-+	if (var->xres_virtual < var->xres)
-+		var->xres_virtual = var->xres;
-+	if (var->yres_virtual < var->yres)
-+		var->yres_virtual = var->yres;
-+	max_frame_size = ofbi->region.size;
-+	line_size = (var->xres_virtual * var->bits_per_pixel) >> 3;
-+
-+	if (line_size * var->yres_virtual > max_frame_size) {
-+		/* Try to keep yres_virtual first */
-+		line_size = max_frame_size / var->yres_virtual;
-+		var->xres_virtual = line_size * 8 / var->bits_per_pixel;
-+		if (var->xres_virtual < var->xres) {
-+			/* Still doesn't fit. Shrink yres_virtual too */
-+			var->xres_virtual = var->xres;
-+			line_size = var->xres * var->bits_per_pixel / 8;
-+			var->yres_virtual = max_frame_size / line_size;
-+		}
-+		/* Recheck this, as the virtual size changed. */
-+		if (var->xres_virtual < var->xres)
-+			var->xres = var->xres_virtual;
-+		if (var->yres_virtual < var->yres)
-+			var->yres = var->yres_virtual;
-+		if (var->xres < xres_min || var->yres < yres_min) {
-+			DBG("Cannot fit FB to memory\n");
-+			return -EINVAL;
-+		}
-+	}
-+	if (var->xres + var->xoffset > var->xres_virtual)
-+		var->xoffset = var->xres_virtual - var->xres;
-+	if (var->yres + var->yoffset > var->yres_virtual)
-+		var->yoffset = var->yres_virtual - var->yres;
-+
-+	if (var->bits_per_pixel == 16) {
-+		var->red.offset  = 11; var->red.length   = 5;
-+		var->red.msb_right   = 0;
-+		var->green.offset = 5;  var->green.length = 6;
-+		var->green.msb_right = 0;
-+		var->blue.offset = 0;  var->blue.length  = 5;
-+		var->blue.msb_right  = 0;
-+	} else if (var->bits_per_pixel == 24) {
-+		var->red.offset  = 16; var->red.length   = 8;
-+		var->red.msb_right   = 0;
-+		var->green.offset = 8;  var->green.length = 8;
-+		var->green.msb_right = 0;
-+		var->blue.offset = 0;  var->blue.length  = 8;
-+		var->blue.msb_right  = 0;
-+		var->transp.offset = 0; var->transp.length = 0;
-+	} else if (var->bits_per_pixel == 32) {
-+		var->red.offset  = 16; var->red.length   = 8;
-+		var->red.msb_right   = 0;
-+		var->green.offset = 8;  var->green.length = 8;
-+		var->green.msb_right = 0;
-+		var->blue.offset = 0;  var->blue.length  = 8;
-+		var->blue.msb_right  = 0;
-+		var->transp.offset = 0; var->transp.length = 0;
-+	} else {
-+		DBG("failed to setup fb color mask\n");
-+		return -EINVAL;
-+	}
-+
-+	DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n",
-+			var->xres, var->yres,
-+			var->xres_virtual, var->yres_virtual);
-+
-+	var->height             = -1;
-+	var->width              = -1;
-+	var->grayscale          = 0;
-+
-+	if (display && display->get_timings) {
-+		struct omap_video_timings timings;
-+		display->get_timings(display, &timings);
-+
-+		/* pixclock in ps, the rest in pixclock */
-+		var->pixclock = timings.pixel_clock != 0 ?
-+			KHZ2PICOS(timings.pixel_clock) :
-+			0;
-+		var->left_margin = timings.hfp;
-+		var->right_margin = timings.hbp;
-+		var->upper_margin = timings.vfp;
-+		var->lower_margin = timings.vbp;
-+		var->hsync_len = timings.hsw;
-+		var->vsync_len = timings.vsw;
-+	} else {
-+		var->pixclock = 0;
-+		var->left_margin = 0;
-+		var->right_margin = 0;
-+		var->upper_margin = 0;
-+		var->lower_margin = 0;
-+		var->hsync_len = 0;
-+		var->vsync_len = 0;
-+	}
-+
-+	/* TODO: get these from panel->config */
-+	var->vmode              = FB_VMODE_NONINTERLACED;
-+	var->sync               = 0;
-+
-+	return 0;
-+}
-+
-+/*
-+ * ---------------------------------------------------------------------------
-+ * fbdev framework callbacks
-+ * ---------------------------------------------------------------------------
-+ */
-+static int omapfb_open(struct fb_info *fbi, int user)
-+{
-+	return 0;
-+}
-+
-+static int omapfb_release(struct fb_info *fbi, int user)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+
-+	DBG("Closing fb with plane index %d\n", ofbi->id);
-+
-+	omapfb_lock(fbdev);
-+#if 1
-+	if (display) {
-+		/* XXX Is this really needed ? */
-+		if (display->sync)
-+			display->sync(display);
-+
-+		if (display->update)
-+			display->update(display,
-+					0, 0,
-+					display->panel->timings.x_res,
-+					display->panel->timings.y_res);
-+	}
-+#endif
-+
-+	if (display && display->sync)
-+		display->sync(display);
-+
-+	omapfb_unlock(fbdev);
-+
-+	return 0;
-+}
-+
-+/* setup overlay according to the fb */
-+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
-+		int posx, int posy, int outw, int outh)
-+{
-+	int r = 0;
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct fb_var_screeninfo *var = &fbi->var;
-+	enum omap_color_mode mode = 0;
-+	int offset;
-+	u32 data_start_p;
-+	void *data_start_v;
-+
-+	DBG("setup_overlay %d\n", ofbi->id);
-+
-+	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0 &&
-+			(outw != var->xres || outh != var->yres)) {
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	offset = ((var->yoffset * var->xres_virtual +
-+				var->xoffset) * var->bits_per_pixel) >> 3;
-+
-+	data_start_p = ofbi->region.paddr + offset;
-+	data_start_v = ofbi->region.vaddr + offset;
-+
-+	mode = fb_mode_to_dss_mode(var);
-+
-+	if (mode == -EINVAL) {
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	r = ovl->setup_input(ovl,
-+			data_start_p, data_start_v,
-+			var->xres_virtual,
-+			var->xres, var->yres,
-+			mode);
-+
-+	if (r)
-+		goto err;
-+
-+	r = ovl->setup_output(ovl,
-+			posx, posy,
-+			outw, outh);
-+
-+	if (r)
-+		goto err;
-+
-+	return 0;
-+
-+err:
-+	DBG("setup_overlay failed\n");
-+	return r;
-+}
-+
-+/* apply var to the overlay */
-+int omapfb_apply_changes(struct fb_info *fbi, int init)
-+{
-+	int r = 0;
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct fb_var_screeninfo *var = &fbi->var;
-+	struct omap_overlay *ovl;
-+	int posx, posy;
-+	int outw, outh;
-+	int i;
-+
-+	for (i = 0; i < ofbi->num_overlays; i++) {
-+		ovl = ofbi->overlays[i];
-+
-+		DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
-+
-+		if (ofbi->region.size == 0) {
-+			/* the fb is not available. disable the overlay */
-+			ovl->enable(ovl, 0);
-+			if (!init && ovl->manager)
-+				ovl->manager->apply(ovl->manager);
-+			continue;
-+		}
-+
-+		if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
-+			outw = var->xres;
-+			outh = var->yres;
-+		} else {
-+			outw = ovl->info.out_width;
-+			outh = ovl->info.out_height;
-+		}
-+
-+		if (init) {
-+			posx = 0;
-+			posy = 0;
-+		} else {
-+			posx = ovl->info.pos_x;
-+			posy = ovl->info.pos_y;
-+		}
-+
-+		r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh);
-+		if (r)
-+			goto err;
-+
-+		if (!init && ovl->manager)
-+			ovl->manager->apply(ovl->manager);
-+	}
-+	return 0;
-+err:
-+	DBG("apply_changes failed\n");
-+	return r;
-+}
-+
-+/* checks var and eventually tweaks it to something supported,
-+ * DO NOT MODIFY PAR */
-+static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
-+{
-+	int r;
-+
-+	DBG("check_var(%d)\n", FB2OFB(fbi)->id);
-+
-+	r = check_fb_var(fbi, var);
-+
-+	return r;
-+}
-+
-+/* set the video mode according to info->var */
-+static int omapfb_set_par(struct fb_info *fbi)
-+{
-+	int r;
-+
-+	DBG("set_par(%d)\n", FB2OFB(fbi)->id);
-+
-+	set_fb_fix(fbi);
-+	r = omapfb_apply_changes(fbi, 0);
-+
-+	return r;
-+}
-+
-+static void omapfb_rotate(struct fb_info *fbi, int rotate)
-+{
-+	DBG("rotate(%d)\n", FB2OFB(fbi)->id);
-+	return;
-+}
-+
-+static int omapfb_pan_display(struct fb_var_screeninfo *var,
-+		struct fb_info *fbi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	int r = 0;
-+
-+	DBG("pan_display(%d)\n", ofbi->id);
-+
-+	omapfb_lock(fbdev);
-+
-+	if (var->xoffset != fbi->var.xoffset ||
-+	    var->yoffset != fbi->var.yoffset) {
-+		struct fb_var_screeninfo new_var;
-+
-+		new_var = fbi->var;
-+		new_var.xoffset = var->xoffset;
-+		new_var.yoffset = var->yoffset;
-+
-+		r = check_fb_var(fbi, &new_var);
-+
-+		if (r == 0) {
-+			fbi->var = new_var;
-+			set_fb_fix(fbi);
-+			r = omapfb_apply_changes(fbi, 0);
-+		}
-+	}
-+
-+	omapfb_unlock(fbdev);
-+
-+	return r;
-+}
-+
-+static void mmap_user_open(struct vm_area_struct *vma)
-+{
-+	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
-+
-+	atomic_inc(&ofbi->map_count);
-+}
-+
-+static void mmap_user_close(struct vm_area_struct *vma)
-+{
-+	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
-+
-+	atomic_dec(&ofbi->map_count);
-+}
-+
-+static struct vm_operations_struct mmap_user_ops = {
-+	.open = mmap_user_open,
-+	.close = mmap_user_close,
-+};
-+
-+static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb_mem_region *rg = &ofbi->region;
-+	unsigned long off;
-+	unsigned long start;
-+	u32 len;
-+
-+	if (vma->vm_end - vma->vm_start == 0)
-+		return 0;
-+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
-+		return -EINVAL;
-+	off = vma->vm_pgoff << PAGE_SHIFT;
-+
-+	start = rg->paddr;
-+	len = rg->size;
-+	if (off >= len)
-+		return -EINVAL;
-+	if ((vma->vm_end - vma->vm_start + off) > len)
-+		return -EINVAL;
-+	off += start;
-+	vma->vm_pgoff = off >> PAGE_SHIFT;
-+	vma->vm_flags |= VM_IO | VM_RESERVED;
-+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-+	vma->vm_ops = &mmap_user_ops;
-+	vma->vm_private_data = ofbi;
-+	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-+			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
-+		return -EAGAIN;
-+	/* vm_ops.open won't be called for mmap itself. */
-+	atomic_inc(&ofbi->map_count);
-+	return 0;
-+}
-+
-+/* Store a single color palette entry into a pseudo palette or the hardware
-+ * palette if one is available. For now we support only 16bpp and thus store
-+ * the entry only to the pseudo palette.
-+ */
-+static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
-+		u_int blue, u_int transp, int update_hw_pal)
-+{
-+	/*struct omapfb_info *ofbi = FB2OFB(fbi);*/
-+	/*struct omapfb2_device *fbdev = ofbi->fbdev;*/
-+	struct fb_var_screeninfo *var = &fbi->var;
-+	int r = 0;
-+
-+	enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */
-+
-+	/*switch (plane->color_mode) {*/
-+	switch (mode) {
-+	case OMAPFB_COLOR_YUV422:
-+	case OMAPFB_COLOR_YUV420:
-+	case OMAPFB_COLOR_YUY422:
-+		r = -EINVAL;
-+		break;
-+	case OMAPFB_COLOR_CLUT_8BPP:
-+	case OMAPFB_COLOR_CLUT_4BPP:
-+	case OMAPFB_COLOR_CLUT_2BPP:
-+	case OMAPFB_COLOR_CLUT_1BPP:
-+		/*
-+		   if (fbdev->ctrl->setcolreg)
-+		   r = fbdev->ctrl->setcolreg(regno, red, green, blue,
-+		   transp, update_hw_pal);
-+		   */
-+		/* Fallthrough */
-+		r = -EINVAL;
-+		break;
-+	case OMAPFB_COLOR_RGB565:
-+	case OMAPFB_COLOR_RGB444:
-+	case OMAPFB_COLOR_RGB24P:
-+	case OMAPFB_COLOR_RGB24U:
-+		if (r != 0)
-+			break;
-+
-+		if (regno < 0) {
-+			r = -EINVAL;
-+			break;
-+		}
-+
-+		if (regno < 16) {
-+			u16 pal;
-+			pal = ((red >> (16 - var->red.length)) <<
-+					var->red.offset) |
-+				((green >> (16 - var->green.length)) <<
-+				 var->green.offset) |
-+				(blue >> (16 - var->blue.length));
-+			((u32 *)(fbi->pseudo_palette))[regno] = pal;
-+		}
-+		break;
-+	default:
-+		BUG();
-+	}
-+	return r;
-+}
-+
-+static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
-+		u_int transp, struct fb_info *info)
-+{
-+	DBG("setcolreg\n");
-+
-+	return _setcolreg(info, regno, red, green, blue, transp, 1);
-+}
-+
-+static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
-+{
-+	int count, index, r;
-+	u16 *red, *green, *blue, *transp;
-+	u16 trans = 0xffff;
-+
-+	DBG("setcmap\n");
-+
-+	red     = cmap->red;
-+	green   = cmap->green;
-+	blue    = cmap->blue;
-+	transp  = cmap->transp;
-+	index   = cmap->start;
-+
-+	for (count = 0; count < cmap->len; count++) {
-+		if (transp)
-+			trans = *transp++;
-+		r = _setcolreg(info, index++, *red++, *green++, *blue++, trans,
-+				count == cmap->len - 1);
-+		if (r != 0)
-+			return r;
-+	}
-+
-+	return 0;
-+}
-+
-+static int omapfb_blank(int blank, struct fb_info *fbi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	struct omap_display *display = fb2display(fbi);
-+	int do_update = 0;
-+	int r = 0;
-+
-+	omapfb_lock(fbdev);
-+
-+	switch (blank) {
-+	case FB_BLANK_UNBLANK:
-+		if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) {
-+			r = -EINVAL;
-+			goto exit;
-+		}
-+
-+		if (display->resume)
-+			r = display->resume(display);
-+
-+		if (r == 0 && display->get_update_mode &&
-+				display->get_update_mode(display) ==
-+				OMAP_DSS_UPDATE_MANUAL)
-+			do_update = 1;
-+
-+		break;
-+
-+	case FB_BLANK_POWERDOWN:
-+		if (display->state != OMAP_DSS_DISPLAY_ACTIVE) {
-+			r = -EINVAL;
-+			goto exit;
-+		}
-+
-+		if (display->suspend)
-+			r = display->suspend(display);
-+
-+		break;
-+
-+	default:
-+		r = -EINVAL;
-+	}
-+
-+exit:
-+	omapfb_unlock(fbdev);
-+
-+	if (r == 0 && do_update && display->update)
-+		r = display->update(display,
-+				0, 0,
-+				display->panel->timings.x_res,
-+				display->panel->timings.y_res);
-+
-+	return r;
-+}
-+
-+static struct fb_ops omapfb_ops = {
-+	.owner          = THIS_MODULE,
-+	.fb_open        = omapfb_open,
-+	.fb_release     = omapfb_release,
-+	.fb_fillrect    = cfb_fillrect,
-+	.fb_copyarea    = cfb_copyarea,
-+	.fb_imageblit   = cfb_imageblit,
-+	.fb_blank       = omapfb_blank,
-+	.fb_ioctl       = omapfb_ioctl,
-+	.fb_check_var   = omapfb_check_var,
-+	.fb_set_par     = omapfb_set_par,
-+	.fb_rotate      = omapfb_rotate,
-+	.fb_pan_display = omapfb_pan_display,
-+	.fb_mmap	= omapfb_mmap,
-+	.fb_setcolreg	= omapfb_setcolreg,
-+	.fb_setcmap	= omapfb_setcmap,
-+};
-+
-+static void omapfb_free_fbmem(struct omapfb2_device *fbdev, int fbnum)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[fbnum]);
-+	struct omapfb_mem_region *rg;
-+
-+	rg = &ofbi->region;
-+
-+	if (rg->paddr)
-+		if (omap_vram_free(rg->paddr, rg->vaddr, rg->size))
-+			dev_err(fbdev->dev, "VRAM FREE failed\n");
-+
-+	rg->vaddr = NULL;
-+	rg->paddr = 0;
-+	rg->alloc = 0;
-+	rg->size = 0;
-+}
-+
-+static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev)
-+{
-+	int i;
-+
-+	DBG("free all fbmem\n");
-+
-+	for (i = 0; i < fbdev->num_fbs; i++)
-+		omapfb_free_fbmem(fbdev, i);
-+
-+	return 0;
-+}
-+
-+static int omapfb_alloc_fbmem(struct omapfb2_device *fbdev, int fbnum,
-+		unsigned long size)
-+{
-+	struct omapfb_info *ofbi;
-+	struct omapfb_mem_region *rg;
-+	unsigned long paddr;
-+	void *vaddr;
-+
-+	size = PAGE_ALIGN(size);
-+
-+	ofbi = FB2OFB(fbdev->fbs[fbnum]);
-+	rg = &ofbi->region;
-+	memset(rg, 0, sizeof(*rg));
-+
-+	DBG("allocating %lu bytes for fb %d\n",
-+			size, ofbi->id);
-+
-+	vaddr = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr);
-+	DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
-+
-+	if (vaddr == NULL) {
-+		dev_err(fbdev->dev,
-+				"failed to allocate framebuffer\n");
-+		return -ENOMEM;
-+	}
-+
-+	rg->paddr = paddr;
-+	rg->vaddr = vaddr;
-+	rg->size = size;
-+	rg->alloc = 1;
-+
-+	return 0;
-+}
-+
-+int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum,
-+		unsigned long size)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[fbnum]);
-+	struct omapfb_mem_region *rg = &ofbi->region;
-+	unsigned old_size = rg->size;
-+	int r;
-+
-+	size = PAGE_ALIGN(size);
-+
-+	omapfb_free_fbmem(fbdev, fbnum);
-+
-+	if (size == 0)
-+		return 0;
-+
-+	r = omapfb_alloc_fbmem(fbdev, fbnum, size);
-+
-+	if (r)
-+		omapfb_alloc_fbmem(fbdev, fbnum, old_size);
-+
-+	return r;
-+}
-+
-+/* allocate fbmem using display resolution as reference */
-+static int omapfb_alloc_fbmem_display(struct omapfb2_device *fbdev, int fbnum,
-+		unsigned long def_vram)
-+{
-+	struct omapfb_info *ofbi;
-+	struct omap_display *display;
-+	int bytespp;
-+	unsigned long size;
-+
-+	ofbi = FB2OFB(fbdev->fbs[fbnum]);
-+	display =  fb2display(fbdev->fbs[fbnum]);
-+
-+	if (!display)
-+		return 0;
-+
-+	switch (display->panel->bpp) {
-+	case 16:
-+		bytespp = 2;
-+		break;
-+	case 24:
-+	case 32:
-+		bytespp = 4;
-+		break;
-+	default:
-+		bytespp = 4;
-+		break;
-+	}
-+
-+	size = display->panel->timings.x_res * display->panel->timings.y_res *
-+		bytespp;
-+
-+	if (def_vram > size)
-+		size = def_vram;
-+
-+	return omapfb_alloc_fbmem(fbdev, fbnum, size);
-+}
-+
-+static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
-+{
-+	int i, r;
-+	unsigned long vrams[10];
-+
-+	memset(vrams, 0, sizeof(vrams));
-+
-+	if (def_vram) {
-+		char *p = def_vram;
-+		i = 0;
-+
-+		while (true) {
-+			unsigned long size;
-+
-+			size = memparse(p, &p);
-+
-+			if (size == 0) {
-+				dev_err(fbdev->dev, "illegal vram size\n");
-+				break;
-+			}
-+
-+			vrams[i++] = size;
-+
-+			if (*p != ',')
-+				break;
-+
-+			p++;
-+		}
-+	}
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		r = omapfb_alloc_fbmem_display(fbdev, i, vrams[i]);
-+
-+		if (r)
-+			return r;
-+	}
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
-+		struct omapfb_mem_region *rg;
-+		rg = &ofbi->region;
-+
-+		DBG("region%d phys %08x virt %p size=%lu\n",
-+				i,
-+				rg->paddr,
-+				rg->vaddr,
-+				rg->size);
-+	}
-+
-+	return 0;
-+}
-+
-+/* initialize fb_info, var, fix to something sane based on the display */
-+static int fbinfo_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
-+{
-+	struct fb_var_screeninfo *var = &fbi->var;
-+	struct fb_fix_screeninfo *fix = &fbi->fix;
-+	struct omap_display *display = fb2display(fbi);
-+	int r = 0;
-+
-+	fbi->fbops = &omapfb_ops;
-+	fbi->flags = FBINFO_FLAG_DEFAULT;
-+	fbi->pseudo_palette = fbdev->pseudo_palette;
-+
-+	strncpy(fix->id, MODULE_NAME, sizeof(fix->id));
-+
-+	var->nonstd = 0;
-+
-+	if (display) {
-+		var->xres = display->panel->timings.x_res;
-+		var->yres = display->panel->timings.y_res;
-+		var->xres_virtual = var->xres;
-+		var->yres_virtual = var->yres;
-+		/*        var->rotate       = def_rotate; */
-+
-+		switch (display->panel->bpp) {
-+		case 16:
-+			var->bits_per_pixel = 16;
-+			break;
-+		case 18:
-+			var->bits_per_pixel = 16;
-+			break;
-+		case 24:
-+			var->bits_per_pixel = 32;
-+			break;
-+		default:
-+			dev_err(fbdev->dev, "illegal display bpp\n");
-+			return -EINVAL;
-+		}
-+	}
-+
-+	r = check_fb_var(fbi, var);
-+	if (r)
-+		goto err;
-+
-+	set_fb_fix(fbi);
-+
-+#ifdef DEBUG
-+	if (omapfb_debug)
-+		fill_fb(FB2OFB(fbi)->region.vaddr, fbi);
-+#endif
-+err:
-+	return r;
-+}
-+
-+static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi)
-+{
-+	fb_dealloc_cmap(&fbi->cmap);
-+}
-+
-+
-+static void omapfb_free_resources(struct omapfb2_device *fbdev)
-+{
-+	int i;
-+
-+	DBG("free_resources\n");
-+
-+	if (fbdev == NULL)
-+		return;
-+
-+	for (i = 0; i < fbdev->num_fbs; i++)
-+		unregister_framebuffer(fbdev->fbs[i]);
-+
-+	/* free the reserved fbmem */
-+	omapfb_free_all_fbmem(fbdev);
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		fbinfo_cleanup(fbdev, fbdev->fbs[i]);
-+		framebuffer_release(fbdev->fbs[i]);
-+	}
-+
-+	for (i = 0; i < fbdev->num_displays; i++) {
-+		if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED)
-+			fbdev->displays[i]->disable(fbdev->displays[i]);
-+
-+		omap_dss_put_display(fbdev->displays[i]);
-+	}
-+
-+	dev_set_drvdata(fbdev->dev, NULL);
-+	kfree(fbdev);
-+}
-+
-+static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
-+{
-+	int r, i;
-+
-+	fbdev->num_fbs = 0;
-+
-+	DBG("create %d framebuffers\n",	CONFIG_FB_OMAP2_NUM_FBS);
-+
-+	/* allocate fb_infos */
-+	for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) {
-+		struct fb_info *fbi;
-+		struct omapfb_info *ofbi;
-+
-+		fbi = framebuffer_alloc(sizeof(struct omapfb_info),
-+				fbdev->dev);
-+
-+		if (fbi == NULL) {
-+			dev_err(fbdev->dev,
-+				"unable to allocate memory for plane info\n");
-+			return -ENOMEM;
-+		}
-+
-+		fbdev->fbs[i] = fbi;
-+
-+		ofbi = FB2OFB(fbi);
-+		ofbi->fbdev = fbdev;
-+		ofbi->id = i;
-+		fbdev->num_fbs++;
-+	}
-+
-+	DBG("fb_infos allocated\n");
-+
-+	/* assign overlays for the fbs */
-+	for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) {
-+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
-+
-+		ofbi->overlays[0] = fbdev->overlays[i];
-+		ofbi->num_overlays = 1;
-+	}
-+
-+	/* allocate fb memories */
-+	r = omapfb_allocate_all_fbs(fbdev);
-+	if (r) {
-+		dev_err(fbdev->dev, "failed to allocate fbmem\n");
-+		return r;
-+	}
-+
-+	DBG("fbmems allocated\n");
-+
-+	/* setup fb_infos */
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		r = fbinfo_init(fbdev, fbdev->fbs[i]);
-+		if (r) {
-+			dev_err(fbdev->dev, "failed to setup fb_info\n");
-+			return r;
-+		}
-+	}
-+
-+	DBG("fb_infos initialized\n");
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		r = register_framebuffer(fbdev->fbs[i]);
-+		if (r != 0) {
-+			dev_err(fbdev->dev,
-+				"registering framebuffer %d failed\n", i);
-+			return r;
-+		}
-+	}
-+
-+	DBG("framebuffers registered\n");
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		r = omapfb_apply_changes(fbdev->fbs[i], 1);
-+		if (r)
-+			dev_err(fbdev->dev, "failed to change mode\n");
-+	}
-+
-+	/* Enable the first framebuffer that has overlay that is connected
-+	 * to display. Usually this would be the GFX plane. */
-+	r = 0;
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
-+		int t;
-+
-+		for (t = 0; t < ofbi->num_overlays; t++) {
-+			struct omap_overlay *ovl = ofbi->overlays[t];
-+			if (ovl->manager && ovl->manager->display) {
-+				ovl->enable(ovl, 1);
-+				r = 1;
-+				break;
-+			}
-+		}
-+
-+		if (r)
-+			break;
-+	}
-+
-+	DBG("create_framebuffers done\n");
-+
-+	return 0;
-+}
-+
-+int omapfb_mode_to_timings(const char *mode_str,
-+		struct omap_video_timings *timings, unsigned *bpp)
-+{
-+	struct fb_info fbi;
-+	struct fb_var_screeninfo var;
-+	struct fb_ops fbops;
-+	int r;
-+
-+	/* this is quite a hack, but I wanted to use the modedb and for
-+	 * that we need fb_info and var, so we create dummy ones */
-+
-+	memset(&fbi, 0, sizeof(fbi));
-+	memset(&var, 0, sizeof(var));
-+	memset(&fbops, 0, sizeof(fbops));
-+	fbi.fbops = &fbops;
-+
-+	r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24);
-+
-+	if (r != 0) {
-+		timings->pixel_clock = PICOS2KHZ(var.pixclock);
-+		timings->hfp = var.left_margin;
-+		timings->hbp = var.right_margin;
-+		timings->vfp = var.upper_margin;
-+		timings->vbp = var.lower_margin;
-+		timings->hsw = var.hsync_len;
-+		timings->vsw = var.vsync_len;
-+		timings->x_res = var.xres;
-+		timings->y_res = var.yres;
-+
-+		switch (var.bits_per_pixel) {
-+		case 16:
-+			*bpp = 16;
-+			break;
-+		case 24:
-+		case 32:
-+		default:
-+			*bpp = 24;
-+			break;
-+		}
-+
-+		return 0;
-+	} else {
-+		return -EINVAL;
-+	}
-+}
-+
-+static int omapfb_probe(struct platform_device *pdev)
-+{
-+	struct omapfb2_device *fbdev = NULL;
-+	int r = 0;
-+	int i, t;
-+	struct omap_overlay *ovl;
-+	struct omap_display *def_display;
-+
-+	DBG("omapfb_probe\n");
-+
-+	if (pdev->num_resources != 0) {
-+		dev_err(&pdev->dev, "probed for an unknown device\n");
-+		r = -ENODEV;
-+		goto err0;
-+	}
-+
-+	fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL);
-+	if (fbdev == NULL) {
-+		r = -ENOMEM;
-+		goto err0;
-+	}
-+
-+	mutex_init(&fbdev->mtx);
-+
-+	fbdev->dev = &pdev->dev;
-+	platform_set_drvdata(pdev, fbdev);
-+
-+	fbdev->num_displays = 0;
-+	t = omap_dss_get_num_displays();
-+	for (i = 0; i < t; i++) {
-+		struct omap_display *display;
-+		display = omap_dss_get_display(i);
-+		if (!display) {
-+			dev_err(&pdev->dev, "can't get display %d\n", i);
-+			r = -EINVAL;
-+			goto cleanup;
-+		}
-+
-+		fbdev->displays[fbdev->num_displays++] = display;
-+	}
-+
-+	if (fbdev->num_displays == 0) {
-+		dev_err(&pdev->dev, "no displays\n");
-+		r = -EINVAL;
-+		goto cleanup;
-+	}
-+
-+	fbdev->num_overlays = omap_dss_get_num_overlays();
-+	for (i = 0; i < fbdev->num_overlays; i++)
-+		fbdev->overlays[i] = omap_dss_get_overlay(i);
-+
-+	fbdev->num_managers = omap_dss_get_num_overlay_managers();
-+	for (i = 0; i < fbdev->num_managers; i++)
-+		fbdev->managers[i] = omap_dss_get_overlay_manager(i);
-+
-+
-+	/* gfx overlay should be the default one. find a display
-+	 * connected to that, and use it as default display */
-+	ovl = omap_dss_get_overlay(0);
-+	if (ovl->manager && ovl->manager->display) {
-+		def_display = ovl->manager->display;
-+	} else {
-+		dev_err(&pdev->dev, "cannot find default display\n");
-+		r = -EINVAL;
-+		goto cleanup;
-+	}
-+
-+	if (def_mode && strlen(def_mode) > 0)
-+	{
-+		struct omap_video_timings timings;
-+		unsigned bpp;
-+
-+		if (omapfb_mode_to_timings(def_mode, &timings, &bpp) == 0) {
-+			if (def_display->set_timings)
-+				def_display->set_timings(def_display, &timings);
-+
-+			def_display->panel->bpp = bpp;
-+		}
-+	}
-+
-+	r = omapfb_create_framebuffers(fbdev);
-+	if (r)
-+		goto cleanup;
-+
-+	for (i = 0; i < fbdev->num_managers; i++) {
-+		struct omap_overlay_manager *mgr;
-+		mgr = fbdev->managers[i];
-+		r = mgr->apply(mgr);
-+		if (r) {
-+			dev_err(fbdev->dev, "failed to apply dispc config\n");
-+			goto cleanup;
-+		}
-+	}
-+
-+	DBG("mgr->apply'ed\n");
-+
-+	r = def_display->enable(def_display);
-+	if (r) {
-+		dev_err(fbdev->dev, "Failed to enable display '%s'\n",
-+				def_display->name);
-+		goto cleanup;
-+	}
-+
-+	/* set the update mode */
-+	if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
-+#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
-+		if (def_display->set_update_mode)
-+			def_display->set_update_mode(def_display,
-+					OMAP_DSS_UPDATE_AUTO);
-+		if (def_display->enable_te)
-+			def_display->enable_te(def_display, 1);
-+#else
-+		if (def_display->set_update_mode)
-+			def_display->set_update_mode(def_display,
-+					OMAP_DSS_UPDATE_MANUAL);
-+		if (def_display->enable_te)
-+			def_display->enable_te(def_display, 0);
-+#endif
-+	} else {
-+		if (def_display->set_update_mode)
-+			def_display->set_update_mode(def_display,
-+					OMAP_DSS_UPDATE_AUTO);
-+	}
-+
-+	for (i = 0; i < fbdev->num_displays; i++) {
-+		struct omap_display *display = fbdev->displays[i];
-+
-+		if (display->update)
-+			display->update(display,
-+					0, 0,
-+					display->panel->timings.x_res,
-+					display->panel->timings.y_res);
-+	}
-+
-+	DBG("display->updated\n");
-+
-+	omapfb_create_sysfs(fbdev);
-+	DBG("sysfs created\n");
-+
-+	return 0;
-+
-+cleanup:
-+	omapfb_free_resources(fbdev);
-+err0:
-+	dev_err(&pdev->dev, "failed to setup omapfb\n");
-+	return r;
-+}
-+
-+static int omapfb_remove(struct platform_device *pdev)
-+{
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+
-+	/* FIXME: wait till completion of pending events */
-+
-+	omapfb_remove_sysfs(fbdev);
-+
-+	omapfb_free_resources(fbdev);
-+
-+	return 0;
-+}
-+
-+static struct platform_driver omapfb_driver = {
-+	.probe          = omapfb_probe,
-+	.remove         = omapfb_remove,
-+	.driver         = {
-+		.name   = "omapfb",
-+		.owner  = THIS_MODULE,
-+	},
-+};
-+
-+static int __init omapfb_init(void)
-+{
-+	DBG("omapfb_init\n");
-+
-+	if (platform_driver_register(&omapfb_driver)) {
-+		printk(KERN_ERR "failed to register omapfb driver\n");
-+		return -ENODEV;
-+	}
-+
-+	return 0;
-+}
-+
-+static void __exit omapfb_exit(void)
-+{
-+	DBG("omapfb_exit\n");
-+	platform_driver_unregister(&omapfb_driver);
-+}
-+
-+module_param_named(video_mode, def_mode, charp, 0);
-+module_param_named(vram, def_vram, charp, 0);
-+
-+/* late_initcall to let panel/ctrl drivers loaded first.
-+ * I guess better option would be a more dynamic approach,
-+ * so that omapfb reacts to new panels when they are loaded */
-+late_initcall(omapfb_init);
-+/*module_init(omapfb_init);*/
-+module_exit(omapfb_exit);
-+
-+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
-+MODULE_DESCRIPTION("OMAP2/3 Framebuffer");
-+MODULE_LICENSE("GPL v2");
-diff --git a/drivers/video/omap2/omapfb-sysfs.c b/drivers/video/omap2/omapfb-sysfs.c
-new file mode 100644
-index 0000000..4383e44
---- /dev/null
-+++ b/drivers/video/omap2/omapfb-sysfs.c
-@@ -0,0 +1,901 @@
-+/*
-+ * linux/drivers/video/omap2/omapfb-sysfs.c
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * Some code and ideas taken from drivers/video/omap/ driver
-+ * by Imre Deak.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/fb.h>
-+#include <linux/sysfs.h>
-+#include <linux/device.h>
-+#include <linux/uaccess.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+
-+#include <mach/display.h>
-+#include <mach/omapfb.h>
-+
-+#include "omapfb.h"
-+
-+static int omapfb_attach_framebuffer(struct fb_info *fbi,
-+		struct omap_overlay *ovl)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+	int i, t;
-+	int r;
-+
-+	if (ofbi->num_overlays >= OMAPFB_MAX_OVL_PER_FB) {
-+		dev_err(fbdev->dev, "fb has max number of overlays already\n");
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < ofbi->num_overlays; i++) {
-+		if (ofbi->overlays[i] == ovl) {
-+			dev_err(fbdev->dev, "fb already attached to overlay\n");
-+			return -EINVAL;
-+		}
-+	}
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
-+		for (t = 0; t < ofbi2->num_overlays; t++) {
-+			if (ofbi2->overlays[t] == ovl) {
-+				dev_err(fbdev->dev, "overlay already in use\n");
-+				return -EINVAL;
-+			}
-+		}
-+	}
-+
-+	ofbi->overlays[ofbi->num_overlays++] = ovl;
-+
-+/*
-+	if (ovl->manager && ovl->manager->display)
-+		omapfb_adjust_fb(fbi, ovl, 0, 0);
-+*/
-+	r = omapfb_apply_changes(fbi, 1);
-+	if (r)
-+		return r;
-+
-+	if (ovl->manager)
-+		ovl->manager->apply(ovl->manager);
-+
-+	return 0;
-+}
-+
-+static int omapfb_detach_framebuffer(struct fb_info *fbi,
-+		struct omap_overlay *ovl)
-+{
-+	int i;
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	struct omapfb2_device *fbdev = ofbi->fbdev;
-+
-+	for (i = 0; i < ofbi->num_overlays; i++) {
-+		if (ofbi->overlays[i] == ovl)
-+			break;
-+	}
-+
-+	if (i == ofbi->num_overlays) {
-+		dev_err(fbdev->dev, "cannot detach fb, overlay not attached\n");
-+		return -EINVAL;
-+	}
-+
-+	ovl->enable(ovl, 0);
-+
-+	if (ovl->manager)
-+		ovl->manager->apply(ovl->manager);
-+
-+	for (i = i + 1; i < ofbi->num_overlays; i++)
-+		ofbi->overlays[i-1] = ofbi->overlays[i];
-+
-+	ofbi->num_overlays--;
-+
-+	return 0;
-+}
-+
-+
-+static ssize_t show_framebuffers(struct device *dev,
-+		struct device_attribute *attr,
-+		char *buf)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	ssize_t l = 0, size = PAGE_SIZE;
-+	int i, t;
-+
-+	omapfb_lock(fbdev);
-+
-+	for (i = 0; i < fbdev->num_fbs; i++) {
-+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
-+		struct omapfb_mem_region *rg;
-+
-+		rg = &ofbi->region;
-+
-+		l += snprintf(buf + l, size - l, "%d p:%08x v:%p size:%lu t:",
-+				ofbi->id,
-+				rg->paddr, rg->vaddr, rg->size);
-+
-+		if (ofbi->num_overlays == 0)
-+			l += snprintf(buf + l, size - l, "none");
-+
-+		for (t = 0; t < ofbi->num_overlays; t++) {
-+			struct omap_overlay *ovl;
-+			ovl = ofbi->overlays[t];
-+
-+			l += snprintf(buf + l, size - l, "%s%s",
-+					t == 0 ? "" : ",",
-+					ovl->name);
-+		}
-+
-+		l += snprintf(buf + l, size - l, "\n");
-+	}
-+
-+	omapfb_unlock(fbdev);
-+
-+	return l;
-+}
-+
-+static struct omap_overlay *find_overlay_by_name(struct omapfb2_device *fbdev,
-+		char *name)
-+{
-+	int i;
-+
-+	for (i = 0; i < fbdev->num_overlays; i++)
-+		if (strcmp(name, fbdev->overlays[i]->name) == 0)
-+			return fbdev->overlays[i];
-+
-+	return NULL;
-+}
-+
-+static struct omap_display *find_display_by_name(struct omapfb2_device *fbdev,
-+		char *name)
-+{
-+	int i;
-+
-+	for (i = 0; i < fbdev->num_displays; i++)
-+		if (strcmp(name, fbdev->displays[i]->name) == 0)
-+			return fbdev->displays[i];
-+
-+	return NULL;
-+}
-+
-+static struct omap_overlay_manager *find_manager_by_name(
-+		struct omapfb2_device *fbdev,
-+		char *name)
-+{
-+	int i;
-+
-+	for (i = 0; i < fbdev->num_managers; i++)
-+		if (strcmp(name, fbdev->managers[i]->name) == 0)
-+			return fbdev->managers[i];
-+
-+	return NULL;
-+}
-+
-+static int parse_overlays(struct omapfb2_device *fbdev, char *str,
-+		struct omap_overlay *ovls[])
-+{
-+	int num_ovls = 0;
-+	int s, e = 0;
-+	char ovlname[10];
-+
-+	while (1) {
-+		struct omap_overlay *ovl;
-+
-+		s = e;
-+
-+		while (e < strlen(str) && str[e] != ',')
-+			e++;
-+
-+		strncpy(ovlname, str + s, e - s);
-+		ovlname[e-s] = 0;
-+
-+		DBG("searching for '%s'\n", ovlname);
-+		ovl = find_overlay_by_name(fbdev, ovlname);
-+
-+		if (ovl) {
-+			DBG("found an overlay\n");
-+			ovls[num_ovls] = ovl;
-+			num_ovls++;
-+		} else {
-+			DBG("unknown overlay %s\n", str);
-+			return 0;
-+		}
-+
-+		if (e == strlen(str))
-+			break;
-+
-+		e++;
-+	}
-+
-+	return num_ovls;
-+}
-+
-+static ssize_t store_framebuffers(struct device *dev,
-+		struct device_attribute *attr,
-+		const char *buf, size_t count)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	int idx;
-+	char fbname[3];
-+	unsigned long fbnum;
-+	char ovlnames[40];
-+	int num_ovls = 0;
-+	struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB];
-+	struct fb_info *fbi;
-+	struct omapfb_info *ofbi;
-+	int r, i;
-+
-+	idx = 0;
-+	while (idx < count && buf[idx] != ' ')
-+		++idx;
-+
-+	if (idx == count)
-+		return -EINVAL;
-+
-+	if (idx >= sizeof(fbname))
-+		return -EINVAL;
-+
-+	strncpy(fbname, buf, idx);
-+	fbname[idx] = 0;
-+	idx++;
-+
-+	if (strict_strtoul(fbname, 10, &fbnum))
-+		return -EINVAL;
-+
-+	r = sscanf(buf + idx, "t:%39s", ovlnames);
-+
-+	if (r != 1) {
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	omapfb_lock(fbdev);
-+
-+	if (fbnum >= fbdev->num_fbs) {
-+		dev_err(dev, "fb not found\n");
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	fbi = fbdev->fbs[fbnum];
-+	ofbi = FB2OFB(fbi);
-+
-+	if (strcmp(ovlnames, "none") == 0) {
-+		num_ovls = 0;
-+	} else {
-+		num_ovls = parse_overlays(fbdev, ovlnames, ovls);
-+
-+		if (num_ovls == 0) {
-+			dev_err(dev, "overlays not found\n");
-+			r = -EINVAL;
-+			goto err;
-+		}
-+	}
-+
-+	for (i = 0; i < ofbi->num_overlays; i++) {
-+		r = omapfb_detach_framebuffer(fbi, ofbi->overlays[i]);
-+		if (r) {
-+			dev_err(dev, "detach failed\n");
-+			goto err;
-+		}
-+	}
-+
-+	if (num_ovls > 0) {
-+		for (i = 0; i < num_ovls; i++) {
-+			r = omapfb_attach_framebuffer(fbi, ovls[i]);
-+			if (r) {
-+				dev_err(dev, "attach failed\n");
-+				goto err;
-+			}
-+		}
-+	}
-+
-+	omapfb_unlock(fbdev);
-+	return count;
-+
-+err:
-+	omapfb_unlock(fbdev);
-+	return r;
-+}
-+
-+static ssize_t show_overlays(struct device *dev, struct device_attribute *attr,
-+		char *buf)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	ssize_t l = 0, size = PAGE_SIZE;
-+	int i, mgr_num;
-+
-+	omapfb_lock(fbdev);
-+
-+	for (i = 0; i < fbdev->num_overlays; i++) {
-+		struct omap_overlay *ovl;
-+		struct omap_overlay_manager *mgr;
-+
-+		ovl = fbdev->overlays[i];
-+		mgr = ovl->manager;
-+
-+		for (mgr_num = 0; mgr_num < fbdev->num_managers; mgr_num++)
-+			if (fbdev->managers[mgr_num] == mgr)
-+				break;
-+
-+		l += snprintf(buf + l, size - l,
-+			"%s t:%s x:%d y:%d iw:%d ih:%d w: %d h: %d e:%d\n",
-+			ovl->name,
-+			mgr ? mgr->name : "none",
-+			ovl->info.pos_x,
-+			ovl->info.pos_y,
-+			ovl->info.width,
-+			ovl->info.height,
-+			ovl->info.out_width,
-+			ovl->info.out_height,
-+			ovl->info.enabled);
-+	}
-+
-+	omapfb_unlock(fbdev);
-+
-+	return l;
-+}
-+
-+static ssize_t store_overlays(struct device *dev,
-+		struct device_attribute *attr,
-+		const char *buf, size_t count)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	int idx;
-+	struct omap_overlay *ovl = NULL;
-+	struct omap_overlay_manager *mgr;
-+	int r;
-+	char ovlname[10];
-+	int posx, posy, outw, outh;
-+	int enabled;
-+
-+	idx = 0;
-+	while (idx < count && buf[idx] != ' ')
-+		++idx;
-+
-+	if (idx == count)
-+		return -EINVAL;
-+
-+	if (idx >= sizeof(ovlname))
-+		return -EINVAL;
-+
-+	strncpy(ovlname, buf, idx);
-+	ovlname[idx] = 0;
-+	idx++;
-+
-+	omapfb_lock(fbdev);
-+
-+	ovl = find_overlay_by_name(fbdev, ovlname);
-+
-+	if (!ovl) {
-+		dev_err(dev, "ovl not found\n");
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	DBG("ovl %s found\n", ovl->name);
-+
-+	mgr = ovl->manager;
-+
-+	posx = ovl->info.pos_x;
-+	posy = ovl->info.pos_y;
-+	outw = ovl->info.out_width;
-+	outh = ovl->info.out_height;
-+	enabled = ovl->info.enabled;
-+
-+	while (idx < count) {
-+		char c;
-+		int val;
-+		int len;
-+		char sval[10];
-+
-+		r = sscanf(buf + idx, "%c:%d%n", &c, &val, &len);
-+
-+		if (r != 2) {
-+			val = 0;
-+
-+			r = sscanf(buf + idx, "%c:%9s%n", &c, sval, &len);
-+
-+			if (r != 2) {
-+				dev_err(dev, "sscanf failed, aborting\n");
-+				r = -EINVAL;
-+				goto err;
-+			}
-+		} else {
-+			sval[0] = 0;
-+		}
-+
-+		switch (c) {
-+		case 't':
-+			if (strcmp(sval, "none") == 0) {
-+				mgr = NULL;
-+			} else {
-+				mgr = find_manager_by_name(fbdev, sval);
-+
-+				if (mgr == NULL) {
-+					dev_err(dev, "no such manager\n");
-+					r = -EINVAL;
-+					goto err;
-+				}
-+
-+				DBG("manager %s found\n", mgr->name);
-+			}
-+
-+			break;
-+
-+		case 'x':
-+			posx = val;
-+			break;
-+
-+		case 'y':
-+			posy = val;
-+			break;
-+
-+		case 'w':
-+			if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE)
-+				outw = val;
-+			break;
-+
-+		case 'h':
-+			if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE)
-+				outh = val;
-+			break;
-+
-+		case 'e':
-+			enabled = val;
-+			break;
-+
-+		default:
-+			dev_err(dev, "unknown option %c\n", c);
-+			r = -EINVAL;
-+			goto err;
-+		}
-+
-+		idx += len + 1;
-+	}
-+
-+	r = ovl->setup_output(ovl, posx, posy, outw, outh);
-+
-+	if (r) {
-+		dev_err(dev, "setup overlay failed\n");
-+		goto err;
-+	}
-+
-+	if (mgr != ovl->manager) {
-+		/* detach old manager */
-+		if (ovl->manager) {
-+			r = ovl->unset_manager(ovl);
-+			if (r) {
-+				dev_err(dev, "detach failed\n");
-+				goto err;
-+			}
-+		}
-+
-+		if (mgr) {
-+			r = ovl->set_manager(ovl, mgr);
-+			if (r) {
-+				dev_err(dev, "Failed to attach overlay\n");
-+				goto err;
-+			}
-+		}
-+	}
-+
-+	r = ovl->enable(ovl, enabled);
-+
-+	if (r) {
-+		dev_err(dev, "enable overlay failed\n");
-+		goto err;
-+	}
-+
-+	if (mgr) {
-+		r = mgr->apply(mgr);
-+		if (r) {
-+			dev_err(dev, "failed to apply dispc config\n");
-+			goto err;
-+		}
-+	} else {
-+		ovl->enable(ovl, 0);
-+	}
-+
-+	if (mgr && mgr->display && mgr->display->update)
-+		mgr->display->update(mgr->display,
-+				0, 0,
-+				mgr->display->panel->timings.x_res,
-+				mgr->display->panel->timings.y_res);
-+
-+	omapfb_unlock(fbdev);
-+	return count;
-+
-+err:
-+	omapfb_unlock(fbdev);
-+	return r;
-+}
-+
-+static ssize_t show_managers(struct device *dev, struct device_attribute *attr,
-+		char *buf)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	ssize_t l = 0, size = PAGE_SIZE;
-+	int i;
-+
-+	omapfb_lock(fbdev);
-+
-+	for (i = 0; i < fbdev->num_managers; i++) {
-+		struct omap_display *display;
-+		struct omap_overlay_manager *mgr;
-+
-+		mgr = fbdev->managers[i];
-+		display = mgr->display;
-+
-+		l += snprintf(buf + l, size - l, "%s t:%s\n",
-+				mgr->name, display ? display->name : "none");
-+	}
-+
-+	omapfb_unlock(fbdev);
-+
-+	return l;
-+}
-+
-+static ssize_t store_managers(struct device *dev,
-+		struct device_attribute *attr,
-+		const char *buf, size_t count)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	int idx;
-+	struct omap_overlay_manager *mgr;
-+	struct omap_display *display;
-+	char mgrname[10];
-+	char displayname[10];
-+	int r;
-+
-+	idx = 0;
-+	while (idx < count && buf[idx] != ' ')
-+		++idx;
-+
-+	if (idx == count)
-+		return -EINVAL;
-+
-+	if (idx >= sizeof(mgrname))
-+		return -EINVAL;
-+
-+	strncpy(mgrname, buf, idx);
-+	mgrname[idx] = 0;
-+	idx++;
-+
-+	omapfb_lock(fbdev);
-+
-+	mgr = find_manager_by_name(fbdev, mgrname);
-+
-+	if (!mgr) {
-+		dev_err(dev, "manager not found\n");
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	r = sscanf(buf + idx, "t:%9s", displayname);
-+
-+	if (r != 1) {
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	if (strcmp(displayname, "none") == 0) {
-+		display = NULL;
-+	} else {
-+		display = find_display_by_name(fbdev, displayname);
-+
-+		if (!display) {
-+			dev_err(dev, "display not found\n");
-+			r = -EINVAL;
-+			goto err;
-+		}
-+	}
-+
-+	if (mgr->display) {
-+		r = mgr->unset_display(mgr);
-+		if (r) {
-+			dev_err(dev, "failed to unset display\n");
-+			goto err;
-+		}
-+	}
-+
-+	if (display) {
-+		r = mgr->set_display(mgr, display);
-+		if (r) {
-+			dev_err(dev, "failed to set manager\n");
-+			goto err;
-+		}
-+
-+		r = mgr->apply(mgr);
-+		if (r) {
-+			dev_err(dev, "failed to apply dispc config\n");
-+			goto err;
-+		}
-+	}
-+
-+	omapfb_unlock(fbdev);
-+	return count;
-+
-+err:
-+	omapfb_unlock(fbdev);
-+	return r;
-+}
-+
-+static ssize_t show_displays(struct device *dev, struct device_attribute *attr,
-+		char *buf)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	ssize_t l = 0, size = PAGE_SIZE;
-+	int i;
-+	struct omap_video_timings timings;
-+
-+	omapfb_lock(fbdev);
-+
-+	for (i = 0; i < fbdev->num_displays; i++) {
-+		struct omap_display *display;
-+		enum omap_dss_update_mode mode = -1;
-+		int te = 0;
-+
-+		display = fbdev->displays[i];
-+
-+		if (display->get_update_mode)
-+			mode = display->get_update_mode(display);
-+
-+		if (display->get_te)
-+			te = display->get_te(display);
-+
-+		if (display->get_timings)
-+			display->get_timings(display, &timings);
-+		else
-+			memset(&timings, 0, sizeof(timings));
-+
-+		l += snprintf(buf + l, size - l,
-+				"%s e:%d u:%d t:%d h:%u/%u/%u/%u "
-+				"v:%u/%u/%u/%u p:%u\n",
-+				display->name,
-+				display->state != OMAP_DSS_DISPLAY_DISABLED,
-+				mode, te,
-+				timings.x_res,
-+				timings.hfp, timings.hbp, timings.hsw,
-+				timings.y_res,
-+				timings.vfp, timings.vbp, timings.vsw,
-+				timings.pixel_clock);
-+	}
-+
-+	omapfb_unlock(fbdev);
-+
-+	return l;
-+}
-+
-+static ssize_t store_displays(struct device *dev,
-+		struct device_attribute *attr,
-+		const char *buf, size_t count)
-+{
-+	struct platform_device *pdev = to_platform_device(dev);
-+	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
-+	int enable;
-+	struct omap_video_timings old_timings;
-+	struct omap_video_timings new_timings;
-+	enum omap_dss_update_mode mode;
-+	struct omap_display *display = NULL;
-+	int r;
-+	int te;
-+	char str[128];
-+	char *s, *tok;
-+
-+	if (strlen(buf) > sizeof(str) - 1)
-+		return -EINVAL;
-+
-+	strcpy(str, buf);
-+
-+	/* remove trailing linefeeds */
-+	s = str + strlen(str) - 1;
-+	while (s >= str	&& *s == '\n') {
-+		*s = 0;
-+		s--;
-+	}
-+
-+	s = str;
-+
-+	if ((tok = strsep(&s, " ")) == 0)
-+		return -EINVAL;
-+
-+	omapfb_lock(fbdev);
-+
-+	display = find_display_by_name(fbdev, tok);
-+
-+	if (!display) {
-+		dev_err(dev, "display not found\n");
-+		r = -EINVAL;
-+		goto err;
-+	}
-+
-+	enable = display->state != OMAP_DSS_DISPLAY_DISABLED;
-+	if (display->get_update_mode)
-+		mode = display->get_update_mode(display);
-+	else
-+		mode = 0;
-+
-+	if (display->get_te)
-+		te = display->get_te(display);
-+	else
-+		te = 0;
-+
-+	if (display->get_timings)
-+		display->get_timings(display, &old_timings);
-+	else
-+		memset(&old_timings, 0, sizeof(old_timings));
-+
-+	memcpy(&new_timings, &old_timings, sizeof(new_timings));
-+
-+	while ((tok = strsep(&s, " "))) {
-+		char c, *o;
-+
-+		if (strlen(tok) < 3 || tok[1] != ':') {
-+			dev_err(dev, "illegal option\n");
-+			r = -EINVAL;
-+			goto err;
-+		}
-+
-+		c = tok[0];
-+		o = tok + 2;
-+
-+		switch (c) {
-+		case 'e':
-+			enable = simple_strtoul(o, NULL, 0);
-+			break;
-+
-+		case 'u':
-+			mode = simple_strtoul(o, NULL, 0);
-+			break;
-+
-+		case 't':
-+			te = simple_strtoul(o, NULL, 0);
-+			break;
-+
-+		case 'm': {
-+			unsigned bpp;
-+			if (omapfb_mode_to_timings(o, &new_timings, &bpp) != 0)
-+				memset(&new_timings, 0, sizeof(new_timings));
-+
-+			break;
-+		}
-+
-+		case 'h': {
-+			unsigned xres, hfp, hbp, hsw;
-+
-+			if (sscanf(o, "%u/%u/%u/%u",
-+						&xres, &hfp, &hbp, &hsw) != 4) {
-+				dev_err(dev, "illegal horizontal timings\n");
-+				r = -EINVAL;
-+				goto err;
-+			}
-+
-+			new_timings.x_res = xres;
-+			new_timings.hfp = hfp;
-+			new_timings.hbp = hbp;
-+			new_timings.hsw = hsw;
-+			break;
-+		}
-+
-+		case 'v': {
-+			unsigned yres, vfp, vbp, vsw;
-+
-+			if (sscanf(o, "%u/%u/%u/%u",
-+						&yres, &vfp, &vbp, &vsw) != 4) {
-+				dev_err(dev, "illegal vertical timings\n");
-+				r = -EINVAL;
-+				goto err;
-+			}
-+
-+			new_timings.y_res = yres;
-+			new_timings.vfp = vfp;
-+			new_timings.vbp = vbp;
-+			new_timings.vsw = vsw;
-+			break;
-+		}
-+
-+		case 'p':
-+			new_timings.pixel_clock = simple_strtoul(o, NULL, 0);
-+			break;
-+
-+		default:
-+			dev_err(dev, "unknown option %c\n", c);
-+			r = -EINVAL;
-+			goto err;
-+		}
-+	}
-+
-+	if (memcmp(&new_timings, &old_timings, sizeof(new_timings)) != 0) {
-+		if (display->set_timings)
-+			display->set_timings(display, &new_timings);
-+
-+		/* sigh, bpp is not a setting of the display, but
-+		 * the overlay. */
-+		//def_display->panel->bpp = bpp;
-+	}
-+
-+	if (enable != (display->state != OMAP_DSS_DISPLAY_DISABLED)) {
-+		if (enable) {
-+			r = display->enable(display);
-+			if (r)
-+				dev_err(dev, "failed to enable display\n");
-+		} else {
-+			display->disable(display);
-+		}
-+	}
-+
-+	if (display->set_update_mode && display->get_update_mode) {
-+		if (mode != display->get_update_mode(display))
-+			display->set_update_mode(display, mode);
-+	}
-+
-+	if (display->enable_te && display->get_te) {
-+		if (te != display->get_te(display))
-+			display->enable_te(display, te);
-+	}
-+
-+	r = count;
-+err:
-+	omapfb_unlock(fbdev);
-+	return r;
-+}
-+
-+
-+static DEVICE_ATTR(framebuffers, S_IRUGO | S_IWUSR,
-+		show_framebuffers, store_framebuffers);
-+static DEVICE_ATTR(overlays, S_IRUGO | S_IWUSR,
-+		show_overlays, store_overlays);
-+static DEVICE_ATTR(managers, S_IRUGO | S_IWUSR,
-+		show_managers, store_managers);
-+static DEVICE_ATTR(displays, S_IRUGO | S_IWUSR,
-+		show_displays, store_displays);
-+
-+static struct attribute *omapfb_attrs[] = {
-+	&dev_attr_framebuffers.attr,
-+	&dev_attr_overlays.attr,
-+	&dev_attr_managers.attr,
-+	&dev_attr_displays.attr,
-+	NULL,
-+};
-+
-+static struct attribute_group omapfb_attr_group = {
-+	.attrs = omapfb_attrs,
-+};
-+
-+void omapfb_create_sysfs(struct omapfb2_device *fbdev)
-+{
-+	int r;
-+
-+	r = sysfs_create_group(&fbdev->dev->kobj, &omapfb_attr_group);
-+	if (r)
-+		dev_err(fbdev->dev, "failed to create sysfs clk file\n");
-+}
-+
-+void omapfb_remove_sysfs(struct omapfb2_device *fbdev)
-+{
-+	sysfs_remove_group(&fbdev->dev->kobj, &omapfb_attr_group);
-+}
-+
-diff --git a/drivers/video/omap2/omapfb.h b/drivers/video/omap2/omapfb.h
-new file mode 100644
-index 0000000..9ba4f1b
---- /dev/null
-+++ b/drivers/video/omap2/omapfb.h
-@@ -0,0 +1,115 @@
-+/*
-+ * linux/drivers/video/omap2/omapfb.h
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * Some code and ideas taken from drivers/video/omap/ driver
-+ * by Imre Deak.
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
-+#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
-+
-+#ifdef CONFIG_FB_OMAP2_DEBUG
-+#define DEBUG
-+#endif
-+
-+#ifdef DEBUG
-+extern unsigned int omapfb_debug;
-+#define DBG(format, ...) \
-+	if (omapfb_debug) \
-+		printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__)
-+#else
-+#define DBG(format, ...)
-+#endif
-+
-+#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par))
-+
-+/* max number of overlays to which a framebuffer data can be direct */
-+#define OMAPFB_MAX_OVL_PER_FB 3
-+
-+/* appended to fb_info */
-+struct omapfb_info {
-+	int id;
-+	struct omapfb_mem_region region;
-+	atomic_t map_count;
-+	int num_overlays;
-+	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
-+	struct omapfb2_device *fbdev;
-+};
-+
-+struct omapfb2_device {
-+	struct device *dev;
-+	struct mutex  mtx;
-+
-+	u32 pseudo_palette[17];
-+
-+	int state;
-+
-+	int num_fbs;
-+	struct fb_info *fbs[10];
-+
-+	int num_displays;
-+	struct omap_display *displays[10];
-+	int num_overlays;
-+	struct omap_overlay *overlays[10];
-+	int num_managers;
-+	struct omap_overlay_manager *managers[10];
-+};
-+
-+void set_fb_fix(struct fb_info *fbi);
-+int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var);
-+int omapfb_realloc_fbmem(struct omapfb2_device *fbdev, int fbnum,
-+		unsigned long size);
-+int omapfb_apply_changes(struct fb_info *fbi, int init);
-+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
-+		int posx, int posy, int outw, int outh);
-+
-+void omapfb_create_sysfs(struct omapfb2_device *fbdev);
-+void omapfb_remove_sysfs(struct omapfb2_device *fbdev);
-+
-+int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg);
-+
-+int omapfb_mode_to_timings(const char *mode_str,
-+		struct omap_video_timings *timings, unsigned *bpp);
-+
-+/* find the display connected to this fb, if any */
-+static inline struct omap_display *fb2display(struct fb_info *fbi)
-+{
-+	struct omapfb_info *ofbi = FB2OFB(fbi);
-+	int i;
-+
-+	/* XXX: returns the display connected to first attached overlay */
-+	for (i = 0; i < ofbi->num_overlays; i++) {
-+		if (ofbi->overlays[i]->manager)
-+			return ofbi->overlays[i]->manager->display;
-+	}
-+
-+	return NULL;
-+}
-+
-+static inline void omapfb_lock(struct omapfb2_device *fbdev)
-+{
-+	mutex_lock(&fbdev->mtx);
-+}
-+
-+static inline void omapfb_unlock(struct omapfb2_device *fbdev)
-+{
-+	mutex_unlock(&fbdev->mtx);
-+}
-+
-+
-+#endif
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0003-DSS-Add-generic-DVI-panel.patch b/recipes/linux/linux-omap-pm/0003-DSS-Add-generic-DVI-panel.patch
deleted file mode 100644
index d043671eaf..0000000000
--- a/recipes/linux/linux-omap-pm/0003-DSS-Add-generic-DVI-panel.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From e9f476d658fb5c7de57498d54c0acd6429439350 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Mon, 5 Jan 2009 15:06:40 +0200
-Subject: [PATCH] DSS: Add generic DVI panel
-
-You also need DSI PLL to generate pix clock for 1280x1024.
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- drivers/video/omap2/Kconfig         |    5 ++
- drivers/video/omap2/Makefile        |    2 +
- drivers/video/omap2/panel-generic.c |   97 +++++++++++++++++++++++++++++++++++
- 3 files changed, 104 insertions(+), 0 deletions(-)
- create mode 100644 drivers/video/omap2/panel-generic.c
-
-diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
-index 8be51a3..be00882 100644
---- a/drivers/video/omap2/Kconfig
-+++ b/drivers/video/omap2/Kconfig
-@@ -37,6 +37,11 @@ config FB_OMAP2_NUM_FBS
- menu "OMAP2/3 Display Device Drivers"
-         depends on OMAP2_DSS
- 
-+config PANEL_GENERIC
-+        tristate "Generic Panel"
-+        help
-+	  Generic panel driver.
-+	  Used for DVI output for Beagle and OMAP3 SDP.
- 
- endmenu
- 
-diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
-index 51c2e00..f471a2b 100644
---- a/drivers/video/omap2/Makefile
-+++ b/drivers/video/omap2/Makefile
-@@ -1,2 +1,4 @@
- obj-$(CONFIG_FB_OMAP2) += omapfb.o
- omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
-+
-+obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
-diff --git a/drivers/video/omap2/panel-generic.c b/drivers/video/omap2/panel-generic.c
-new file mode 100644
-index 0000000..5c8fecd
---- /dev/null
-+++ b/drivers/video/omap2/panel-generic.c
-@@ -0,0 +1,97 @@
-+/*
-+ * Generic panel support
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+
-+#include <mach/display.h>
-+
-+static int generic_panel_init(struct omap_display *display)
-+{
-+	return 0;
-+}
-+
-+static int generic_panel_enable(struct omap_display *display)
-+{
-+	int r = 0;
-+
-+	if (display->hw_config.panel_enable)
-+		r = display->hw_config.panel_enable(display);
-+
-+	return r;
-+}
-+
-+static void generic_panel_disable(struct omap_display *display)
-+{
-+	if (display->hw_config.panel_disable)
-+		display->hw_config.panel_disable(display);
-+}
-+
-+static int generic_panel_suspend(struct omap_display *display)
-+{
-+	generic_panel_disable(display);
-+	return 0;
-+}
-+
-+static int generic_panel_resume(struct omap_display *display)
-+{
-+	return generic_panel_enable(display);
-+}
-+
-+static struct omap_panel generic_panel = {
-+	.owner		= THIS_MODULE,
-+	.name		= "panel-generic",
-+	.init		= generic_panel_init,
-+	.enable		= generic_panel_enable,
-+	.disable	= generic_panel_disable,
-+	.suspend	= generic_panel_suspend,
-+	.resume		= generic_panel_resume,
-+
-+	.timings = {
-+		/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
-+		.x_res		= 640,
-+		.y_res		= 480,
-+		.pixel_clock	= 23500,
-+		.hfp		= 48,
-+		.hsw		= 32,
-+		.hbp		= 80,
-+		.vfp		= 3,
-+		.vsw		= 4,
-+		.vbp		= 7,
-+	},
-+
-+	.bpp		= 24,
-+	.config		= OMAP_DSS_LCD_TFT,
-+};
-+
-+
-+static int __init generic_panel_drv_init(void)
-+{
-+	omap_dss_register_panel(&generic_panel);
-+	return 0;
-+}
-+
-+static void __exit generic_panel_drv_exit(void)
-+{
-+	omap_dss_unregister_panel(&generic_panel);
-+}
-+
-+module_init(generic_panel_drv_init);
-+module_exit(generic_panel_drv_exit);
-+MODULE_LICENSE("GPL");
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0004-DSS-support-for-Beagle-Board.patch b/recipes/linux/linux-omap-pm/0004-DSS-support-for-Beagle-Board.patch
deleted file mode 100644
index 769cbcbff0..0000000000
--- a/recipes/linux/linux-omap-pm/0004-DSS-support-for-Beagle-Board.patch
+++ /dev/null
@@ -1,1607 +0,0 @@
-From 76e1700add1c77b614ed11c3e29e8a39bd4e6b8c Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Mon, 29 Sep 2008 17:03:36 +0300
-Subject: [PATCH] DSS: support for Beagle Board
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- arch/arm/configs/dss_omap3_beagle_defconfig | 1437 +++++++++++++++++++++++++++
- arch/arm/mach-omap2/board-omap3beagle.c     |  101 ++-
- 2 files changed, 1524 insertions(+), 14 deletions(-)
- create mode 100644 arch/arm/configs/dss_omap3_beagle_defconfig
-
-diff --git a/arch/arm/configs/dss_omap3_beagle_defconfig b/arch/arm/configs/dss_omap3_beagle_defconfig
-new file mode 100644
-index 0000000..f39167f
---- /dev/null
-+++ b/arch/arm/configs/dss_omap3_beagle_defconfig
-@@ -0,0 +1,1437 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.28-omap1
-+# Wed Jan  7 15:22:00 2009
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+CONFIG_LOCALVERSION_AUTO=y
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+CONFIG_HAVE_OPROFILE=y
-+# CONFIG_KPROBES is not set
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+CONFIG_HAVE_CLK=y
-+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+CONFIG_CLASSIC_RCU=y
-+# CONFIG_FREEZER is not set
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KIRKWOOD is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_LOKI is not set
-+# CONFIG_ARCH_MV78XX0 is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+CONFIG_ARCH_OMAP=y
-+# CONFIG_ARCH_MSM is not set
-+
-+#
-+# TI OMAP Implementations
-+#
-+CONFIG_ARCH_OMAP_OTG=y
-+# CONFIG_ARCH_OMAP1 is not set
-+# CONFIG_ARCH_OMAP2 is not set
-+CONFIG_ARCH_OMAP3=y
-+
-+#
-+# OMAP Feature Selections
-+#
-+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-+# CONFIG_OMAP_SMARTREFLEX is not set
-+# CONFIG_OMAP_RESET_CLOCKS is not set
-+CONFIG_OMAP_BOOT_TAG=y
-+CONFIG_OMAP_BOOT_REASON=y
-+# CONFIG_OMAP_COMPONENT_VERSION is not set
-+# CONFIG_OMAP_GPIO_SWITCH is not set
-+# CONFIG_OMAP_MUX is not set
-+# CONFIG_OMAP_MCBSP is not set
-+# CONFIG_OMAP_MMU_FWK is not set
-+# CONFIG_OMAP_MBOX_FWK is not set
-+# CONFIG_OMAP_MPU_TIMER is not set
-+CONFIG_OMAP_32K_TIMER=y
-+CONFIG_OMAP_32K_TIMER_HZ=128
-+CONFIG_OMAP_DM_TIMER=y
-+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-+CONFIG_OMAP_LL_DEBUG_UART3=y
-+CONFIG_OMAP2_DSS=m
-+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-+# CONFIG_OMAP2_DSS_RFBI is not set
-+CONFIG_OMAP2_DSS_VENC=y
-+# CONFIG_OMAP2_DSS_SDI is not set
-+# CONFIG_OMAP2_DSS_DSI is not set
-+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-+CONFIG_ARCH_OMAP34XX=y
-+CONFIG_ARCH_OMAP3430=y
-+
-+#
-+# OMAP Board Type
-+#
-+# CONFIG_MACH_OMAP_LDP is not set
-+# CONFIG_MACH_OMAP_3430SDP is not set
-+# CONFIG_MACH_OMAP3EVM is not set
-+CONFIG_MACH_OMAP3_BEAGLE=y
-+# CONFIG_MACH_OVERO is not set
-+# CONFIG_MACH_OMAP3_PANDORA is not set
-+CONFIG_OMAP_TICK_GPTIMER=12
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_32v6K=y
-+CONFIG_CPU_V7=y
-+CONFIG_CPU_32v7=y
-+CONFIG_CPU_ABRT_EV7=y
-+CONFIG_CPU_PABRT_IFAR=y
-+CONFIG_CPU_CACHE_V7=y
-+CONFIG_CPU_CACHE_VIPT=y
-+CONFIG_CPU_COPY_V6=y
-+CONFIG_CPU_TLB_V7=y
-+CONFIG_CPU_HAS_ASID=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_ARM_THUMBEE is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_BPREDICT_DISABLE is not set
-+CONFIG_HAS_TLS_REG=y
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_VMSPLIT_3G=y
-+# CONFIG_VMSPLIT_2G is not set
-+# CONFIG_VMSPLIT_1G is not set
-+CONFIG_PAGE_OFFSET=0xC0000000
-+# CONFIG_PREEMPT is not set
-+CONFIG_HZ=128
-+CONFIG_AEABI=y
-+CONFIG_OABI_COMPAT=y
-+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# CPU Power Management
-+#
-+# CONFIG_CPU_FREQ is not set
-+# CONFIG_CPU_IDLE is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+CONFIG_VFP=y
-+CONFIG_VFPv3=y
-+# CONFIG_NEON is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_MISC=y
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+# CONFIG_SUSPEND is not set
-+# CONFIG_APM_EMULATION is not set
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+CONFIG_IP_PNP_RARP=y
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+# CONFIG_MTD_CONCAT is not set
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+# CONFIG_MTD_CMDLINE_PARTS is not set
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+# CONFIG_MTD_CFI is not set
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+# CONFIG_MTD_NAND_ECC_SMC is not set
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+# CONFIG_MTD_NAND_GPIO is not set
-+CONFIG_MTD_NAND_OMAP2=y
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+# CONFIG_MTD_ONENAND is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+# CONFIG_MISC_DEVICES is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_DH is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_NET_ETHERNET is not set
-+# CONFIG_NETDEV_1000 is not set
-+# CONFIG_NETDEV_10000 is not set
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+# CONFIG_INPUT_MOUSEDEV is not set
-+# CONFIG_INPUT_JOYDEV is not set
-+# CONFIG_INPUT_EVDEV is not set
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+# CONFIG_INPUT_KEYBOARD is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+# CONFIG_INPUT_TOUCHSCREEN is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_NR_UARTS=32
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-+CONFIG_SERIAL_8250_EXTENDED=y
-+CONFIG_SERIAL_8250_MANY_PORTS=y
-+CONFIG_SERIAL_8250_SHARE_IRQ=y
-+CONFIG_SERIAL_8250_DETECT_IRQ=y
-+CONFIG_SERIAL_8250_RSA=y
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+CONFIG_I2C_OMAP=y
-+# CONFIG_I2C2_OMAP_BEAGLE is not set
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_TWL4030_MADC is not set
-+# CONFIG_TWL4030_PWRBUTTON is not set
-+# CONFIG_TWL4030_POWEROFF is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_LP5521 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+# CONFIG_SPI is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+# CONFIG_GPIO_SYSFS is not set
-+
-+#
-+# Memory mapped GPIO expanders:
-+#
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+CONFIG_GPIO_TWL4030=y
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+# CONFIG_WATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_EGPIO is not set
-+# CONFIG_HTC_PASIC3 is not set
-+CONFIG_TWL4030_CORE=y
-+# CONFIG_TWL4030_POWER is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_MFD_T7L66XB is not set
-+# CONFIG_MFD_TC6387XB is not set
-+# CONFIG_MFD_TC6393XB is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-+CONFIG_FB_CFB_FILLRECT=m
-+CONFIG_FB_CFB_COPYAREA=m
-+CONFIG_FB_CFB_IMAGEBLIT=m
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_FB_METRONOME is not set
-+# CONFIG_FB_MB862XX is not set
-+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=4
-+CONFIG_FB_OMAP2=m
-+# CONFIG_FB_OMAP2_DEBUG is not set
-+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-+CONFIG_FB_OMAP2_NUM_FBS=3
-+
-+#
-+# OMAP2/3 Display Device Drivers
-+#
-+CONFIG_PANEL_GENERIC=m
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+# CONFIG_SOUND is not set
-+# CONFIG_HID_SUPPORT is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+# CONFIG_USB_DEBUG is not set
-+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+CONFIG_USB_DEVICE_CLASS=y
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+CONFIG_USB_SUSPEND=y
-+CONFIG_USB_OTG=y
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+CONFIG_USB_MON=y
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+# CONFIG_USB_EHCI_HCD is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+CONFIG_USB_MUSB_HDRC=y
-+CONFIG_USB_MUSB_SOC=y
-+
-+#
-+# OMAP 343x high speed USB support
-+#
-+# CONFIG_USB_MUSB_HOST is not set
-+# CONFIG_USB_MUSB_PERIPHERAL is not set
-+CONFIG_USB_MUSB_OTG=y
-+CONFIG_USB_GADGET_MUSB_HDRC=y
-+CONFIG_USB_MUSB_HDRC_HCD=y
-+# CONFIG_MUSB_PIO_ONLY is not set
-+CONFIG_USB_INVENTRA_DMA=y
-+# CONFIG_USB_TI_CPPI_DMA is not set
-+# CONFIG_USB_MUSB_DEBUG is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+# CONFIG_USB_STORAGE is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+# CONFIG_USB_TEST is not set
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+CONFIG_USB_GADGET=y
-+# CONFIG_USB_GADGET_DEBUG is not set
-+# CONFIG_USB_GADGET_DEBUG_FILES is not set
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=2
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_QE is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+# CONFIG_USB_ZERO is not set
-+CONFIG_USB_ETH=y
-+CONFIG_USB_ETH_RNDIS=y
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+CONFIG_USB_OTG_UTILS=y
-+# CONFIG_USB_GPIO_VBUS is not set
-+# CONFIG_ISP1301_OMAP is not set
-+CONFIG_TWL4030_USB=y
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD/SDIO Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD/SDIO Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_OMAP_HS=y
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_ACCESSIBILITY is not set
-+# CONFIG_NEW_LEDS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+CONFIG_RTC_DRV_TWL4030=y
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_REGULATOR is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# CBUS support
-+#
-+# CONFIG_CBUS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-+CONFIG_PRINT_QUOTA_WARNING=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+CONFIG_NFS_V4=y
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+CONFIG_DEBUG_MUTEXES=y
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_LATENCYTOP is not set
-+CONFIG_HAVE_FUNCTION_TRACER=y
-+
-+#
-+# Tracers
-+#
-+# CONFIG_FUNCTION_TRACER is not set
-+# CONFIG_IRQSOFF_TRACER is not set
-+# CONFIG_SCHED_TRACER is not set
-+# CONFIG_CONTEXT_SWITCH_TRACER is not set
-+# CONFIG_BOOT_TRACER is not set
-+# CONFIG_STACK_TRACER is not set
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_HAVE_ARCH_KGDB=y
-+# CONFIG_KGDB is not set
-+CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+# CONFIG_DEBUG_STACK_USAGE is not set
-+# CONFIG_DEBUG_LL is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index fe97bab..61f0fc9 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
---- /tmp/board-omap3beagle.c    2009-02-17 22:48:44.000000000 +0100
-+++ git/arch/arm/mach-omap2/board-omap3beagle.c 2009-02-17 22:49:05.000000000 +0100
-@@ -45,6 +45,8 @@
- #include <mach/mux.h>
- #include <mach/omap-pm.h>
- #include <mach/clock.h>
-+#include <mach/omapfb.h>
-+#include <mach/display.h>
-
- #include "twl4030-generic-scripts.h"
- #include "mmc-twl4030.h"
-@@ -238,15 +240,6 @@ static void __init omap3_beagle_init_irq(void)
- 	omap_gpio_init();
- }
- 
--static struct platform_device omap3_beagle_lcd_device = {
--	.name		= "omap3beagle_lcd",
--	.id		= -1,
--};
--
--static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
--	.ctrl_name	= "internal",
--};
--
- static struct gpio_led gpio_leds[] = {
- 	{
- 		.name			= "beagleboard::usr0",
-@@ -300,13 +293,94 @@ static struct platform_device keys_gpio = {
- 	},
- };
- 
-+/* DSS */
-+
-+static int beagle_enable_dvi(struct omap_display *display)
-+{
-+	if (display->hw_config.panel_reset_gpio != -1)
-+		gpio_direction_output(display->hw_config.panel_reset_gpio, 1);
-+
-+	return 0;
-+}
-+
-+static void beagle_disable_dvi(struct omap_display *display)
-+{
-+	if (display->hw_config.panel_reset_gpio != -1)
-+		gpio_direction_output(display->hw_config.panel_reset_gpio, 0);
-+}
-+
-+static struct omap_display_data beagle_display_data_dvi = {
-+	.type = OMAP_DISPLAY_TYPE_DPI,
-+	.name = "dvi",
-+	.panel_name = "panel-generic",
-+	.u.dpi.data_lines = 24,
-+	.panel_reset_gpio = 170,
-+	.panel_enable = beagle_enable_dvi,
-+	.panel_disable = beagle_disable_dvi,
-+};
-+
-+
-+static int beagle_panel_enable_tv(struct omap_display *display)
-+{
-+#define ENABLE_VDAC_DEDICATED           0x03
-+#define ENABLE_VDAC_DEV_GRP             0x20
-+
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VDAC_DEDICATED,
-+			TWL4030_VDAC_DEDICATED);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
-+
-+	return 0;
-+}
-+
-+static void beagle_panel_disable_tv(struct omap_display *display)
-+{
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
-+			TWL4030_VDAC_DEDICATED);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
-+			TWL4030_VDAC_DEV_GRP);
-+}
-+
-+static struct omap_display_data beagle_display_data_tv = {
-+	.type = OMAP_DISPLAY_TYPE_VENC,
-+	.name = "tv",
-+	.u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-+	.panel_enable = beagle_panel_enable_tv,
-+	.panel_disable = beagle_panel_disable_tv,
-+};
-+
-+static struct omap_dss_platform_data beagle_dss_data = {
-+	.num_displays = 2,
-+	.displays = {
-+		&beagle_display_data_dvi,
-+		&beagle_display_data_tv,
-+	}
-+};
-+
-+static struct platform_device beagle_dss_device = {
-+	.name          = "omap-dss",
-+	.id            = -1,
-+	.dev            = {
-+		.platform_data = &beagle_dss_data,
-+	},
-+};
-+
-+static void __init beagle_display_init(void)
-+{
-+	int r;
-+
-+	r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset");
-+	if (r < 0)
-+		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
-+}
-+
- static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
- 	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
--	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
- };
- 
- static struct platform_device *omap3_beagle_devices[] __initdata = {
--	&omap3_beagle_lcd_device,
-+	&beagle_dss_device,
- 	&leds_gpio,
- 	&keys_gpio,
- };
-@@ -359,18 +433,17 @@ static void __init omap3_beagle_init(void)
- 	omap_serial_init();
- 
- 	omap_cfg_reg(J25_34XX_GPIO170);
--	gpio_request(170, "DVI_nPD");
--	/* REVISIT leave DVI powered down until it's needed ... */
--	gpio_direction_output(170, true);
- 
- 	usb_musb_init();
- 	usb_ehci_init();
- 	omap3beagle_flash_init();
-+	beagle_display_init();
- }
- 
- static void __init omap3_beagle_map_io(void)
- {
- 	omap2_set_globals_343x();
-+	omap2_set_sdram_vram(1280 * 1024 * 4 * 3, 0);
- 	omap2_map_common_io();
- }
- 
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch b/recipes/linux/linux-omap-pm/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch
deleted file mode 100644
index 57cec272fb..0000000000
--- a/recipes/linux/linux-omap-pm/0005-DSS-Sharp-LS037V7DW01-LCD-Panel-driver.patch
+++ /dev/null
@@ -1,156 +0,0 @@
-From b0d997fcd65c4389e3d4a5e375774e51ebe6186a Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Fri, 14 Nov 2008 15:47:19 +0200
-Subject: [PATCH] DSS: Sharp LS037V7DW01 LCD Panel driver
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- drivers/video/omap2/Kconfig                   |    7 ++-
- drivers/video/omap2/Makefile                  |    1 +
- drivers/video/omap2/panel-sharp-ls037v7dw01.c |  109 +++++++++++++++++++++++++
- 3 files changed, 116 insertions(+), 1 deletions(-)
- create mode 100644 drivers/video/omap2/panel-sharp-ls037v7dw01.c
-
-diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
-index be00882..b54c955 100644
---- a/drivers/video/omap2/Kconfig
-+++ b/drivers/video/omap2/Kconfig
-@@ -43,5 +43,10 @@ config PANEL_GENERIC
- 	  Generic panel driver.
- 	  Used for DVI output for Beagle and OMAP3 SDP.
- 
--endmenu
-+config PANEL_SHARP_LS037V7DW01
-+        tristate "Sharp LS037V7DW01 LCD Panel"
-+        depends on OMAP2_DSS
-+        help
-+          LCD Panel used in TI's SDP3430 and EVM boards
- 
-+endmenu
-diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
-index f471a2b..fe6858e 100644
---- a/drivers/video/omap2/Makefile
-+++ b/drivers/video/omap2/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_FB_OMAP2) += omapfb.o
- omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
- 
- obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
-+obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
-diff --git a/drivers/video/omap2/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/panel-sharp-ls037v7dw01.c
-new file mode 100644
-index 0000000..7d67b6d
---- /dev/null
-+++ b/drivers/video/omap2/panel-sharp-ls037v7dw01.c
-@@ -0,0 +1,109 @@
-+/*
-+ * LCD panel driver for Sharp LS037V7DW01
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/delay.h>
-+
-+#include <mach/display.h>
-+
-+static int sharp_ls_panel_init(struct omap_display *display)
-+{
-+	return 0;
-+}
-+
-+static void sharp_ls_panel_cleanup(struct omap_display *display)
-+{
-+}
-+
-+static int sharp_ls_panel_enable(struct omap_display *display)
-+{
-+	int r = 0;
-+
-+	if (display->hw_config.panel_enable)
-+		r = display->hw_config.panel_enable(display);
-+
-+	return r;
-+}
-+
-+static void sharp_ls_panel_disable(struct omap_display *display)
-+{
-+	if (display->hw_config.panel_disable)
-+		display->hw_config.panel_disable(display);
-+}
-+
-+static int sharp_ls_panel_suspend(struct omap_display *display)
-+{
-+	sharp_ls_panel_disable(display);
-+	return 0;
-+}
-+
-+static int sharp_ls_panel_resume(struct omap_display *display)
-+{
-+	return sharp_ls_panel_enable(display);
-+}
-+
-+static struct omap_panel sharp_ls_panel = {
-+	.owner		= THIS_MODULE,
-+	.name		= "sharp-ls037v7dw01",
-+	.init		= sharp_ls_panel_init,
-+	.cleanup	= sharp_ls_panel_cleanup,
-+	.enable		= sharp_ls_panel_enable,
-+	.disable	= sharp_ls_panel_disable,
-+	.suspend	= sharp_ls_panel_suspend,
-+	.resume		= sharp_ls_panel_resume,
-+	/*.set_mode	= sharp_ls_set_mode, */
-+
-+	.timings = {
-+		.x_res = 480,
-+		.y_res = 640,
-+
-+		.pixel_clock	= 19200,
-+
-+		.hsw		= 2,
-+		.hfp		= 1,
-+		.hbp		= 28,
-+
-+		.vsw		= 1,
-+		.vfp		= 1,
-+		.vbp		= 1,
-+	},
-+
-+	.acb		= 0x28,
-+
-+	.config		= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
-+		OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC,
-+
-+	.bpp = 16,
-+};
-+
-+
-+static int __init sharp_ls_panel_drv_init(void)
-+{
-+	omap_dss_register_panel(&sharp_ls_panel);
-+	return 0;
-+}
-+
-+static void __exit sharp_ls_panel_drv_exit(void)
-+{
-+	omap_dss_unregister_panel(&sharp_ls_panel);
-+}
-+
-+module_init(sharp_ls_panel_drv_init);
-+module_exit(sharp_ls_panel_drv_exit);
-+MODULE_LICENSE("GPL");
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0006-DSS-Support-for-OMAP3-SDP-board.patch b/recipes/linux/linux-omap-pm/0006-DSS-Support-for-OMAP3-SDP-board.patch
deleted file mode 100644
index e73264ebb6..0000000000
--- a/recipes/linux/linux-omap-pm/0006-DSS-Support-for-OMAP3-SDP-board.patch
+++ /dev/null
@@ -1,1877 +0,0 @@
-From 7806a298a80d260473dc488c7cea2a72fe96866f Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Fri, 14 Nov 2008 15:47:55 +0200
-Subject: [PATCH] DSS: Support for OMAP3 SDP board
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- arch/arm/configs/dss_omap_3430sdp_defconfig | 1603 +++++++++++++++++++++++++++
- arch/arm/mach-omap2/board-3430sdp.c         |  215 ++++-
- 2 files changed, 1809 insertions(+), 9 deletions(-)
- create mode 100644 arch/arm/configs/dss_omap_3430sdp_defconfig
-
-diff --git a/arch/arm/configs/dss_omap_3430sdp_defconfig b/arch/arm/configs/dss_omap_3430sdp_defconfig
-new file mode 100644
-index 0000000..42d7f5e
---- /dev/null
-+++ b/arch/arm/configs/dss_omap_3430sdp_defconfig
-@@ -0,0 +1,1603 @@
-+#
-+# Automatically generated make config: don't edit
-+# Linux kernel version: 2.6.28-omap1
-+# Wed Jan  7 15:22:34 2009
-+#
-+CONFIG_ARM=y
-+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-+CONFIG_GENERIC_GPIO=y
-+CONFIG_GENERIC_TIME=y
-+CONFIG_GENERIC_CLOCKEVENTS=y
-+CONFIG_MMU=y
-+# CONFIG_NO_IOPORT is not set
-+CONFIG_GENERIC_HARDIRQS=y
-+CONFIG_STACKTRACE_SUPPORT=y
-+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-+CONFIG_LOCKDEP_SUPPORT=y
-+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-+CONFIG_HARDIRQS_SW_RESEND=y
-+CONFIG_GENERIC_IRQ_PROBE=y
-+CONFIG_RWSEM_GENERIC_SPINLOCK=y
-+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-+CONFIG_GENERIC_HWEIGHT=y
-+CONFIG_GENERIC_CALIBRATE_DELAY=y
-+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-+CONFIG_VECTORS_BASE=0xffff0000
-+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-+
-+#
-+# General setup
-+#
-+CONFIG_EXPERIMENTAL=y
-+CONFIG_BROKEN_ON_SMP=y
-+CONFIG_INIT_ENV_ARG_LIMIT=32
-+CONFIG_LOCALVERSION=""
-+# CONFIG_LOCALVERSION_AUTO is not set
-+CONFIG_SWAP=y
-+CONFIG_SYSVIPC=y
-+CONFIG_SYSVIPC_SYSCTL=y
-+# CONFIG_POSIX_MQUEUE is not set
-+CONFIG_BSD_PROCESS_ACCT=y
-+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-+# CONFIG_TASKSTATS is not set
-+# CONFIG_AUDIT is not set
-+# CONFIG_IKCONFIG is not set
-+CONFIG_LOG_BUF_SHIFT=14
-+# CONFIG_CGROUPS is not set
-+CONFIG_GROUP_SCHED=y
-+CONFIG_FAIR_GROUP_SCHED=y
-+# CONFIG_RT_GROUP_SCHED is not set
-+CONFIG_USER_SCHED=y
-+# CONFIG_CGROUP_SCHED is not set
-+CONFIG_SYSFS_DEPRECATED=y
-+CONFIG_SYSFS_DEPRECATED_V2=y
-+# CONFIG_RELAY is not set
-+# CONFIG_NAMESPACES is not set
-+CONFIG_BLK_DEV_INITRD=y
-+CONFIG_INITRAMFS_SOURCE=""
-+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-+CONFIG_SYSCTL=y
-+CONFIG_EMBEDDED=y
-+CONFIG_UID16=y
-+# CONFIG_SYSCTL_SYSCALL is not set
-+CONFIG_KALLSYMS=y
-+# CONFIG_KALLSYMS_ALL is not set
-+CONFIG_KALLSYMS_EXTRA_PASS=y
-+CONFIG_HOTPLUG=y
-+CONFIG_PRINTK=y
-+CONFIG_BUG=y
-+CONFIG_ELF_CORE=y
-+CONFIG_COMPAT_BRK=y
-+CONFIG_BASE_FULL=y
-+CONFIG_FUTEX=y
-+CONFIG_ANON_INODES=y
-+CONFIG_EPOLL=y
-+CONFIG_SIGNALFD=y
-+CONFIG_TIMERFD=y
-+CONFIG_EVENTFD=y
-+CONFIG_SHMEM=y
-+CONFIG_AIO=y
-+CONFIG_VM_EVENT_COUNTERS=y
-+CONFIG_SLAB=y
-+# CONFIG_SLUB is not set
-+# CONFIG_SLOB is not set
-+# CONFIG_PROFILING is not set
-+# CONFIG_MARKERS is not set
-+CONFIG_HAVE_OPROFILE=y
-+# CONFIG_KPROBES is not set
-+CONFIG_HAVE_KPROBES=y
-+CONFIG_HAVE_KRETPROBES=y
-+CONFIG_HAVE_CLK=y
-+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-+CONFIG_SLABINFO=y
-+CONFIG_RT_MUTEXES=y
-+# CONFIG_TINY_SHMEM is not set
-+CONFIG_BASE_SMALL=0
-+CONFIG_MODULES=y
-+# CONFIG_MODULE_FORCE_LOAD is not set
-+CONFIG_MODULE_UNLOAD=y
-+# CONFIG_MODULE_FORCE_UNLOAD is not set
-+CONFIG_MODVERSIONS=y
-+CONFIG_MODULE_SRCVERSION_ALL=y
-+CONFIG_KMOD=y
-+CONFIG_BLOCK=y
-+# CONFIG_LBD is not set
-+# CONFIG_BLK_DEV_IO_TRACE is not set
-+# CONFIG_LSF is not set
-+# CONFIG_BLK_DEV_BSG is not set
-+# CONFIG_BLK_DEV_INTEGRITY is not set
-+
-+#
-+# IO Schedulers
-+#
-+CONFIG_IOSCHED_NOOP=y
-+CONFIG_IOSCHED_AS=y
-+CONFIG_IOSCHED_DEADLINE=y
-+CONFIG_IOSCHED_CFQ=y
-+CONFIG_DEFAULT_AS=y
-+# CONFIG_DEFAULT_DEADLINE is not set
-+# CONFIG_DEFAULT_CFQ is not set
-+# CONFIG_DEFAULT_NOOP is not set
-+CONFIG_DEFAULT_IOSCHED="anticipatory"
-+CONFIG_CLASSIC_RCU=y
-+CONFIG_FREEZER=y
-+
-+#
-+# System Type
-+#
-+# CONFIG_ARCH_AAEC2000 is not set
-+# CONFIG_ARCH_INTEGRATOR is not set
-+# CONFIG_ARCH_REALVIEW is not set
-+# CONFIG_ARCH_VERSATILE is not set
-+# CONFIG_ARCH_AT91 is not set
-+# CONFIG_ARCH_CLPS7500 is not set
-+# CONFIG_ARCH_CLPS711X is not set
-+# CONFIG_ARCH_EBSA110 is not set
-+# CONFIG_ARCH_EP93XX is not set
-+# CONFIG_ARCH_FOOTBRIDGE is not set
-+# CONFIG_ARCH_NETX is not set
-+# CONFIG_ARCH_H720X is not set
-+# CONFIG_ARCH_IMX is not set
-+# CONFIG_ARCH_IOP13XX is not set
-+# CONFIG_ARCH_IOP32X is not set
-+# CONFIG_ARCH_IOP33X is not set
-+# CONFIG_ARCH_IXP23XX is not set
-+# CONFIG_ARCH_IXP2000 is not set
-+# CONFIG_ARCH_IXP4XX is not set
-+# CONFIG_ARCH_L7200 is not set
-+# CONFIG_ARCH_KIRKWOOD is not set
-+# CONFIG_ARCH_KS8695 is not set
-+# CONFIG_ARCH_NS9XXX is not set
-+# CONFIG_ARCH_LOKI is not set
-+# CONFIG_ARCH_MV78XX0 is not set
-+# CONFIG_ARCH_MXC is not set
-+# CONFIG_ARCH_ORION5X is not set
-+# CONFIG_ARCH_PNX4008 is not set
-+# CONFIG_ARCH_PXA is not set
-+# CONFIG_ARCH_RPC is not set
-+# CONFIG_ARCH_SA1100 is not set
-+# CONFIG_ARCH_S3C2410 is not set
-+# CONFIG_ARCH_SHARK is not set
-+# CONFIG_ARCH_LH7A40X is not set
-+# CONFIG_ARCH_DAVINCI is not set
-+CONFIG_ARCH_OMAP=y
-+# CONFIG_ARCH_MSM is not set
-+
-+#
-+# TI OMAP Implementations
-+#
-+CONFIG_ARCH_OMAP_OTG=y
-+# CONFIG_ARCH_OMAP1 is not set
-+# CONFIG_ARCH_OMAP2 is not set
-+CONFIG_ARCH_OMAP3=y
-+
-+#
-+# OMAP Feature Selections
-+#
-+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-+CONFIG_OMAP_SMARTREFLEX=y
-+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
-+CONFIG_OMAP_RESET_CLOCKS=y
-+CONFIG_OMAP_BOOT_TAG=y
-+CONFIG_OMAP_BOOT_REASON=y
-+# CONFIG_OMAP_COMPONENT_VERSION is not set
-+# CONFIG_OMAP_GPIO_SWITCH is not set
-+CONFIG_OMAP_MUX=y
-+CONFIG_OMAP_MUX_DEBUG=y
-+CONFIG_OMAP_MUX_WARNINGS=y
-+# CONFIG_OMAP_MCBSP is not set
-+# CONFIG_OMAP_MMU_FWK is not set
-+# CONFIG_OMAP_MBOX_FWK is not set
-+# CONFIG_OMAP_MPU_TIMER is not set
-+CONFIG_OMAP_32K_TIMER=y
-+CONFIG_OMAP_32K_TIMER_HZ=128
-+CONFIG_OMAP_DM_TIMER=y
-+CONFIG_OMAP_LL_DEBUG_UART1=y
-+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
-+CONFIG_OMAP_SERIAL_WAKE=y
-+CONFIG_OMAP2_DSS=m
-+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-+# CONFIG_OMAP2_DSS_RFBI is not set
-+CONFIG_OMAP2_DSS_VENC=y
-+# CONFIG_OMAP2_DSS_SDI is not set
-+# CONFIG_OMAP2_DSS_DSI is not set
-+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-+CONFIG_ARCH_OMAP34XX=y
-+CONFIG_ARCH_OMAP3430=y
-+
-+#
-+# OMAP Board Type
-+#
-+# CONFIG_MACH_OMAP_LDP is not set
-+CONFIG_MACH_OMAP_3430SDP=y
-+# CONFIG_MACH_OMAP3EVM is not set
-+# CONFIG_MACH_OMAP3_BEAGLE is not set
-+# CONFIG_MACH_OVERO is not set
-+# CONFIG_MACH_OMAP3_PANDORA is not set
-+CONFIG_OMAP_TICK_GPTIMER=1
-+
-+#
-+# Boot options
-+#
-+
-+#
-+# Power management
-+#
-+
-+#
-+# Processor Type
-+#
-+CONFIG_CPU_32=y
-+CONFIG_CPU_32v6K=y
-+CONFIG_CPU_V7=y
-+CONFIG_CPU_32v7=y
-+CONFIG_CPU_ABRT_EV7=y
-+CONFIG_CPU_PABRT_IFAR=y
-+CONFIG_CPU_CACHE_V7=y
-+CONFIG_CPU_CACHE_VIPT=y
-+CONFIG_CPU_COPY_V6=y
-+CONFIG_CPU_TLB_V7=y
-+CONFIG_CPU_HAS_ASID=y
-+CONFIG_CPU_CP15=y
-+CONFIG_CPU_CP15_MMU=y
-+
-+#
-+# Processor Features
-+#
-+CONFIG_ARM_THUMB=y
-+# CONFIG_ARM_THUMBEE is not set
-+# CONFIG_CPU_ICACHE_DISABLE is not set
-+# CONFIG_CPU_DCACHE_DISABLE is not set
-+# CONFIG_CPU_BPREDICT_DISABLE is not set
-+CONFIG_HAS_TLS_REG=y
-+# CONFIG_OUTER_CACHE is not set
-+
-+#
-+# Bus support
-+#
-+# CONFIG_PCI_SYSCALL is not set
-+# CONFIG_ARCH_SUPPORTS_MSI is not set
-+# CONFIG_PCCARD is not set
-+
-+#
-+# Kernel Features
-+#
-+CONFIG_TICK_ONESHOT=y
-+CONFIG_NO_HZ=y
-+CONFIG_HIGH_RES_TIMERS=y
-+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-+CONFIG_VMSPLIT_3G=y
-+# CONFIG_VMSPLIT_2G is not set
-+# CONFIG_VMSPLIT_1G is not set
-+CONFIG_PAGE_OFFSET=0xC0000000
-+# CONFIG_PREEMPT is not set
-+CONFIG_HZ=128
-+CONFIG_AEABI=y
-+CONFIG_OABI_COMPAT=y
-+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-+CONFIG_SELECT_MEMORY_MODEL=y
-+CONFIG_FLATMEM_MANUAL=y
-+# CONFIG_DISCONTIGMEM_MANUAL is not set
-+# CONFIG_SPARSEMEM_MANUAL is not set
-+CONFIG_FLATMEM=y
-+CONFIG_FLAT_NODE_MEM_MAP=y
-+CONFIG_PAGEFLAGS_EXTENDED=y
-+CONFIG_SPLIT_PTLOCK_CPUS=4
-+# CONFIG_RESOURCES_64BIT is not set
-+# CONFIG_PHYS_ADDR_T_64BIT is not set
-+CONFIG_ZONE_DMA_FLAG=0
-+CONFIG_VIRT_TO_BUS=y
-+CONFIG_UNEVICTABLE_LRU=y
-+# CONFIG_LEDS is not set
-+CONFIG_ALIGNMENT_TRAP=y
-+
-+#
-+# Boot options
-+#
-+CONFIG_ZBOOT_ROM_TEXT=0x0
-+CONFIG_ZBOOT_ROM_BSS=0x0
-+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
-+# CONFIG_XIP_KERNEL is not set
-+# CONFIG_KEXEC is not set
-+
-+#
-+# CPU Power Management
-+#
-+# CONFIG_CPU_FREQ is not set
-+# CONFIG_CPU_IDLE is not set
-+
-+#
-+# Floating point emulation
-+#
-+
-+#
-+# At least one emulation must be selected
-+#
-+CONFIG_FPE_NWFPE=y
-+# CONFIG_FPE_NWFPE_XP is not set
-+# CONFIG_FPE_FASTFPE is not set
-+CONFIG_VFP=y
-+CONFIG_VFPv3=y
-+# CONFIG_NEON is not set
-+
-+#
-+# Userspace binary formats
-+#
-+CONFIG_BINFMT_ELF=y
-+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-+CONFIG_HAVE_AOUT=y
-+# CONFIG_BINFMT_AOUT is not set
-+CONFIG_BINFMT_MISC=y
-+
-+#
-+# Power management options
-+#
-+CONFIG_PM=y
-+# CONFIG_PM_DEBUG is not set
-+CONFIG_PM_SLEEP=y
-+CONFIG_SUSPEND=y
-+CONFIG_SUSPEND_FREEZER=y
-+# CONFIG_APM_EMULATION is not set
-+CONFIG_ARCH_SUSPEND_POSSIBLE=y
-+CONFIG_NET=y
-+
-+#
-+# Networking options
-+#
-+CONFIG_PACKET=y
-+# CONFIG_PACKET_MMAP is not set
-+CONFIG_UNIX=y
-+CONFIG_XFRM=y
-+# CONFIG_XFRM_USER is not set
-+# CONFIG_XFRM_SUB_POLICY is not set
-+# CONFIG_XFRM_MIGRATE is not set
-+# CONFIG_XFRM_STATISTICS is not set
-+CONFIG_NET_KEY=y
-+# CONFIG_NET_KEY_MIGRATE is not set
-+CONFIG_INET=y
-+# CONFIG_IP_MULTICAST is not set
-+# CONFIG_IP_ADVANCED_ROUTER is not set
-+CONFIG_IP_FIB_HASH=y
-+CONFIG_IP_PNP=y
-+CONFIG_IP_PNP_DHCP=y
-+CONFIG_IP_PNP_BOOTP=y
-+CONFIG_IP_PNP_RARP=y
-+# CONFIG_NET_IPIP is not set
-+# CONFIG_NET_IPGRE is not set
-+# CONFIG_ARPD is not set
-+# CONFIG_SYN_COOKIES is not set
-+# CONFIG_INET_AH is not set
-+# CONFIG_INET_ESP is not set
-+# CONFIG_INET_IPCOMP is not set
-+# CONFIG_INET_XFRM_TUNNEL is not set
-+# CONFIG_INET_TUNNEL is not set
-+CONFIG_INET_XFRM_MODE_TRANSPORT=y
-+CONFIG_INET_XFRM_MODE_TUNNEL=y
-+CONFIG_INET_XFRM_MODE_BEET=y
-+# CONFIG_INET_LRO is not set
-+CONFIG_INET_DIAG=y
-+CONFIG_INET_TCP_DIAG=y
-+# CONFIG_TCP_CONG_ADVANCED is not set
-+CONFIG_TCP_CONG_CUBIC=y
-+CONFIG_DEFAULT_TCP_CONG="cubic"
-+# CONFIG_TCP_MD5SIG is not set
-+# CONFIG_IPV6 is not set
-+# CONFIG_NETWORK_SECMARK is not set
-+# CONFIG_NETFILTER is not set
-+# CONFIG_IP_DCCP is not set
-+# CONFIG_IP_SCTP is not set
-+# CONFIG_TIPC is not set
-+# CONFIG_ATM is not set
-+# CONFIG_BRIDGE is not set
-+# CONFIG_NET_DSA is not set
-+# CONFIG_VLAN_8021Q is not set
-+# CONFIG_DECNET is not set
-+# CONFIG_LLC2 is not set
-+# CONFIG_IPX is not set
-+# CONFIG_ATALK is not set
-+# CONFIG_X25 is not set
-+# CONFIG_LAPB is not set
-+# CONFIG_ECONET is not set
-+# CONFIG_WAN_ROUTER is not set
-+# CONFIG_NET_SCHED is not set
-+
-+#
-+# Network testing
-+#
-+# CONFIG_NET_PKTGEN is not set
-+# CONFIG_HAMRADIO is not set
-+# CONFIG_CAN is not set
-+# CONFIG_IRDA is not set
-+# CONFIG_BT is not set
-+# CONFIG_AF_RXRPC is not set
-+# CONFIG_PHONET is not set
-+CONFIG_WIRELESS=y
-+# CONFIG_CFG80211 is not set
-+CONFIG_WIRELESS_OLD_REGULATORY=y
-+# CONFIG_WIRELESS_EXT is not set
-+# CONFIG_MAC80211 is not set
-+# CONFIG_IEEE80211 is not set
-+# CONFIG_RFKILL is not set
-+# CONFIG_NET_9P is not set
-+
-+#
-+# Device Drivers
-+#
-+
-+#
-+# Generic Driver Options
-+#
-+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-+CONFIG_STANDALONE=y
-+CONFIG_PREVENT_FIRMWARE_BUILD=y
-+# CONFIG_FW_LOADER is not set
-+# CONFIG_DEBUG_DRIVER is not set
-+# CONFIG_DEBUG_DEVRES is not set
-+# CONFIG_SYS_HYPERVISOR is not set
-+# CONFIG_CONNECTOR is not set
-+CONFIG_MTD=y
-+# CONFIG_MTD_DEBUG is not set
-+CONFIG_MTD_CONCAT=y
-+CONFIG_MTD_PARTITIONS=y
-+# CONFIG_MTD_REDBOOT_PARTS is not set
-+CONFIG_MTD_CMDLINE_PARTS=y
-+# CONFIG_MTD_AFS_PARTS is not set
-+# CONFIG_MTD_AR7_PARTS is not set
-+
-+#
-+# User Modules And Translation Layers
-+#
-+CONFIG_MTD_CHAR=y
-+CONFIG_MTD_BLKDEVS=y
-+CONFIG_MTD_BLOCK=y
-+# CONFIG_FTL is not set
-+# CONFIG_NFTL is not set
-+# CONFIG_INFTL is not set
-+# CONFIG_RFD_FTL is not set
-+# CONFIG_SSFDC is not set
-+# CONFIG_MTD_OOPS is not set
-+
-+#
-+# RAM/ROM/Flash chip drivers
-+#
-+CONFIG_MTD_CFI=y
-+# CONFIG_MTD_JEDECPROBE is not set
-+CONFIG_MTD_GEN_PROBE=y
-+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-+CONFIG_MTD_MAP_BANK_WIDTH_1=y
-+CONFIG_MTD_MAP_BANK_WIDTH_2=y
-+CONFIG_MTD_MAP_BANK_WIDTH_4=y
-+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-+CONFIG_MTD_CFI_I1=y
-+CONFIG_MTD_CFI_I2=y
-+# CONFIG_MTD_CFI_I4 is not set
-+# CONFIG_MTD_CFI_I8 is not set
-+CONFIG_MTD_CFI_INTELEXT=y
-+# CONFIG_MTD_CFI_AMDSTD is not set
-+# CONFIG_MTD_CFI_STAA is not set
-+CONFIG_MTD_CFI_UTIL=y
-+# CONFIG_MTD_RAM is not set
-+# CONFIG_MTD_ROM is not set
-+# CONFIG_MTD_ABSENT is not set
-+
-+#
-+# Mapping drivers for chip access
-+#
-+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-+# CONFIG_MTD_PHYSMAP is not set
-+# CONFIG_MTD_ARM_INTEGRATOR is not set
-+CONFIG_MTD_OMAP_NOR=y
-+# CONFIG_MTD_PLATRAM is not set
-+
-+#
-+# Self-contained MTD device drivers
-+#
-+# CONFIG_MTD_DATAFLASH is not set
-+# CONFIG_MTD_M25P80 is not set
-+# CONFIG_MTD_SLRAM is not set
-+# CONFIG_MTD_PHRAM is not set
-+# CONFIG_MTD_MTDRAM is not set
-+# CONFIG_MTD_BLOCK2MTD is not set
-+
-+#
-+# Disk-On-Chip Device Drivers
-+#
-+# CONFIG_MTD_DOC2000 is not set
-+# CONFIG_MTD_DOC2001 is not set
-+# CONFIG_MTD_DOC2001PLUS is not set
-+CONFIG_MTD_NAND=y
-+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-+CONFIG_MTD_NAND_ECC_SMC=y
-+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-+# CONFIG_MTD_NAND_GPIO is not set
-+CONFIG_MTD_NAND_OMAP2=y
-+CONFIG_MTD_NAND_IDS=y
-+# CONFIG_MTD_NAND_DISKONCHIP is not set
-+# CONFIG_MTD_NAND_NANDSIM is not set
-+# CONFIG_MTD_NAND_PLATFORM is not set
-+# CONFIG_MTD_ALAUDA is not set
-+CONFIG_MTD_ONENAND=y
-+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-+# CONFIG_MTD_ONENAND_GENERIC is not set
-+CONFIG_MTD_ONENAND_OMAP2=y
-+# CONFIG_MTD_ONENAND_OTP is not set
-+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-+# CONFIG_MTD_ONENAND_SIM is not set
-+
-+#
-+# UBI - Unsorted block images
-+#
-+# CONFIG_MTD_UBI is not set
-+# CONFIG_PARPORT is not set
-+CONFIG_BLK_DEV=y
-+# CONFIG_BLK_DEV_COW_COMMON is not set
-+CONFIG_BLK_DEV_LOOP=y
-+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-+# CONFIG_BLK_DEV_NBD is not set
-+# CONFIG_BLK_DEV_UB is not set
-+CONFIG_BLK_DEV_RAM=y
-+CONFIG_BLK_DEV_RAM_COUNT=16
-+CONFIG_BLK_DEV_RAM_SIZE=16384
-+# CONFIG_BLK_DEV_XIP is not set
-+# CONFIG_CDROM_PKTCDVD is not set
-+# CONFIG_ATA_OVER_ETH is not set
-+CONFIG_MISC_DEVICES=y
-+# CONFIG_EEPROM_93CX6 is not set
-+# CONFIG_ICS932S401 is not set
-+# CONFIG_OMAP_STI is not set
-+# CONFIG_ENCLOSURE_SERVICES is not set
-+# CONFIG_C2PORT is not set
-+CONFIG_HAVE_IDE=y
-+# CONFIG_IDE is not set
-+
-+#
-+# SCSI device support
-+#
-+# CONFIG_RAID_ATTRS is not set
-+CONFIG_SCSI=y
-+CONFIG_SCSI_DMA=y
-+# CONFIG_SCSI_TGT is not set
-+# CONFIG_SCSI_NETLINK is not set
-+CONFIG_SCSI_PROC_FS=y
-+
-+#
-+# SCSI support type (disk, tape, CD-ROM)
-+#
-+CONFIG_BLK_DEV_SD=y
-+# CONFIG_CHR_DEV_ST is not set
-+# CONFIG_CHR_DEV_OSST is not set
-+# CONFIG_BLK_DEV_SR is not set
-+# CONFIG_CHR_DEV_SG is not set
-+# CONFIG_CHR_DEV_SCH is not set
-+
-+#
-+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-+#
-+# CONFIG_SCSI_MULTI_LUN is not set
-+# CONFIG_SCSI_CONSTANTS is not set
-+# CONFIG_SCSI_LOGGING is not set
-+# CONFIG_SCSI_SCAN_ASYNC is not set
-+CONFIG_SCSI_WAIT_SCAN=m
-+
-+#
-+# SCSI Transports
-+#
-+# CONFIG_SCSI_SPI_ATTRS is not set
-+# CONFIG_SCSI_FC_ATTRS is not set
-+# CONFIG_SCSI_ISCSI_ATTRS is not set
-+# CONFIG_SCSI_SAS_LIBSAS is not set
-+# CONFIG_SCSI_SRP_ATTRS is not set
-+CONFIG_SCSI_LOWLEVEL=y
-+# CONFIG_ISCSI_TCP is not set
-+# CONFIG_SCSI_DEBUG is not set
-+# CONFIG_SCSI_DH is not set
-+# CONFIG_ATA is not set
-+# CONFIG_MD is not set
-+CONFIG_NETDEVICES=y
-+# CONFIG_DUMMY is not set
-+# CONFIG_BONDING is not set
-+# CONFIG_MACVLAN is not set
-+# CONFIG_EQUALIZER is not set
-+# CONFIG_TUN is not set
-+# CONFIG_VETH is not set
-+# CONFIG_PHYLIB is not set
-+CONFIG_NET_ETHERNET=y
-+CONFIG_MII=y
-+# CONFIG_AX88796 is not set
-+CONFIG_SMC91X=y
-+# CONFIG_DM9000 is not set
-+# CONFIG_ENC28J60 is not set
-+# CONFIG_SMC911X is not set
-+# CONFIG_IBM_NEW_EMAC_ZMII is not set
-+# CONFIG_IBM_NEW_EMAC_RGMII is not set
-+# CONFIG_IBM_NEW_EMAC_TAH is not set
-+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-+# CONFIG_B44 is not set
-+CONFIG_NETDEV_1000=y
-+CONFIG_NETDEV_10000=y
-+
-+#
-+# Wireless LAN
-+#
-+# CONFIG_WLAN_PRE80211 is not set
-+# CONFIG_WLAN_80211 is not set
-+# CONFIG_IWLWIFI_LEDS is not set
-+
-+#
-+# USB Network Adapters
-+#
-+# CONFIG_USB_CATC is not set
-+# CONFIG_USB_KAWETH is not set
-+# CONFIG_USB_PEGASUS is not set
-+# CONFIG_USB_RTL8150 is not set
-+# CONFIG_USB_USBNET is not set
-+# CONFIG_WAN is not set
-+# CONFIG_PPP is not set
-+# CONFIG_SLIP is not set
-+# CONFIG_NETCONSOLE is not set
-+# CONFIG_NETPOLL is not set
-+# CONFIG_NET_POLL_CONTROLLER is not set
-+# CONFIG_ISDN is not set
-+
-+#
-+# Input device support
-+#
-+CONFIG_INPUT=y
-+# CONFIG_INPUT_FF_MEMLESS is not set
-+# CONFIG_INPUT_POLLDEV is not set
-+
-+#
-+# Userland interfaces
-+#
-+# CONFIG_INPUT_MOUSEDEV is not set
-+# CONFIG_INPUT_JOYDEV is not set
-+CONFIG_INPUT_EVDEV=y
-+# CONFIG_INPUT_EVBUG is not set
-+
-+#
-+# Input Device Drivers
-+#
-+CONFIG_INPUT_KEYBOARD=y
-+# CONFIG_KEYBOARD_ATKBD is not set
-+# CONFIG_KEYBOARD_SUNKBD is not set
-+# CONFIG_KEYBOARD_LKKBD is not set
-+# CONFIG_KEYBOARD_XTKBD is not set
-+# CONFIG_KEYBOARD_NEWTON is not set
-+# CONFIG_KEYBOARD_STOWAWAY is not set
-+CONFIG_KEYBOARD_TWL4030=y
-+# CONFIG_KEYBOARD_LM8323 is not set
-+# CONFIG_KEYBOARD_GPIO is not set
-+# CONFIG_INPUT_MOUSE is not set
-+# CONFIG_INPUT_JOYSTICK is not set
-+# CONFIG_INPUT_TABLET is not set
-+CONFIG_INPUT_TOUCHSCREEN=y
-+CONFIG_TOUCHSCREEN_ADS7846=y
-+# CONFIG_TOUCHSCREEN_FUJITSU is not set
-+# CONFIG_TOUCHSCREEN_GUNZE is not set
-+# CONFIG_TOUCHSCREEN_ELO is not set
-+# CONFIG_TOUCHSCREEN_MTOUCH is not set
-+# CONFIG_TOUCHSCREEN_INEXIO is not set
-+# CONFIG_TOUCHSCREEN_MK712 is not set
-+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-+# CONFIG_TOUCHSCREEN_TSC2005 is not set
-+# CONFIG_TOUCHSCREEN_TSC210X is not set
-+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-+# CONFIG_INPUT_MISC is not set
-+
-+#
-+# Hardware I/O ports
-+#
-+# CONFIG_SERIO is not set
-+# CONFIG_GAMEPORT is not set
-+
-+#
-+# Character devices
-+#
-+CONFIG_VT=y
-+CONFIG_CONSOLE_TRANSLATIONS=y
-+CONFIG_VT_CONSOLE=y
-+CONFIG_HW_CONSOLE=y
-+# CONFIG_VT_HW_CONSOLE_BINDING is not set
-+CONFIG_DEVKMEM=y
-+# CONFIG_SERIAL_NONSTANDARD is not set
-+
-+#
-+# Serial drivers
-+#
-+CONFIG_SERIAL_8250=y
-+CONFIG_SERIAL_8250_CONSOLE=y
-+CONFIG_SERIAL_8250_NR_UARTS=32
-+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-+CONFIG_SERIAL_8250_EXTENDED=y
-+CONFIG_SERIAL_8250_MANY_PORTS=y
-+CONFIG_SERIAL_8250_SHARE_IRQ=y
-+CONFIG_SERIAL_8250_DETECT_IRQ=y
-+CONFIG_SERIAL_8250_RSA=y
-+
-+#
-+# Non-8250 serial port support
-+#
-+CONFIG_SERIAL_CORE=y
-+CONFIG_SERIAL_CORE_CONSOLE=y
-+CONFIG_UNIX98_PTYS=y
-+# CONFIG_LEGACY_PTYS is not set
-+# CONFIG_IPMI_HANDLER is not set
-+CONFIG_HW_RANDOM=y
-+# CONFIG_NVRAM is not set
-+# CONFIG_R3964 is not set
-+# CONFIG_RAW_DRIVER is not set
-+# CONFIG_TCG_TPM is not set
-+CONFIG_I2C=y
-+CONFIG_I2C_BOARDINFO=y
-+CONFIG_I2C_CHARDEV=y
-+CONFIG_I2C_HELPER_AUTO=y
-+
-+#
-+# I2C Hardware Bus support
-+#
-+
-+#
-+# I2C system bus drivers (mostly embedded / system-on-chip)
-+#
-+# CONFIG_I2C_GPIO is not set
-+# CONFIG_I2C_OCORES is not set
-+CONFIG_I2C_OMAP=y
-+# CONFIG_I2C_SIMTEC is not set
-+
-+#
-+# External I2C/SMBus adapter drivers
-+#
-+# CONFIG_I2C_PARPORT_LIGHT is not set
-+# CONFIG_I2C_TAOS_EVM is not set
-+# CONFIG_I2C_TINY_USB is not set
-+
-+#
-+# Other I2C/SMBus bus drivers
-+#
-+# CONFIG_I2C_PCA_PLATFORM is not set
-+# CONFIG_I2C_STUB is not set
-+
-+#
-+# Miscellaneous I2C Chip support
-+#
-+# CONFIG_DS1682 is not set
-+# CONFIG_AT24 is not set
-+# CONFIG_SENSORS_EEPROM is not set
-+# CONFIG_SENSORS_PCF8574 is not set
-+# CONFIG_PCF8575 is not set
-+# CONFIG_SENSORS_PCA9539 is not set
-+# CONFIG_SENSORS_PCF8591 is not set
-+# CONFIG_TPS65010 is not set
-+# CONFIG_TWL4030_MADC is not set
-+# CONFIG_TWL4030_PWRBUTTON is not set
-+# CONFIG_TWL4030_POWEROFF is not set
-+# CONFIG_SENSORS_MAX6875 is not set
-+# CONFIG_SENSORS_TSL2550 is not set
-+# CONFIG_LP5521 is not set
-+# CONFIG_I2C_DEBUG_CORE is not set
-+# CONFIG_I2C_DEBUG_ALGO is not set
-+# CONFIG_I2C_DEBUG_BUS is not set
-+# CONFIG_I2C_DEBUG_CHIP is not set
-+CONFIG_SPI=y
-+# CONFIG_SPI_DEBUG is not set
-+CONFIG_SPI_MASTER=y
-+
-+#
-+# SPI Master Controller Drivers
-+#
-+# CONFIG_SPI_BITBANG is not set
-+CONFIG_SPI_OMAP24XX=y
-+
-+#
-+# SPI Protocol Masters
-+#
-+# CONFIG_SPI_AT25 is not set
-+# CONFIG_SPI_TSC210X is not set
-+# CONFIG_SPI_TSC2301 is not set
-+# CONFIG_SPI_SPIDEV is not set
-+# CONFIG_SPI_TLE62X0 is not set
-+CONFIG_ARCH_REQUIRE_GPIOLIB=y
-+CONFIG_GPIOLIB=y
-+# CONFIG_DEBUG_GPIO is not set
-+# CONFIG_GPIO_SYSFS is not set
-+
-+#
-+# Memory mapped GPIO expanders:
-+#
-+
-+#
-+# I2C GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX732X is not set
-+# CONFIG_GPIO_PCA953X is not set
-+# CONFIG_GPIO_PCF857X is not set
-+CONFIG_GPIO_TWL4030=y
-+
-+#
-+# PCI GPIO expanders:
-+#
-+
-+#
-+# SPI GPIO expanders:
-+#
-+# CONFIG_GPIO_MAX7301 is not set
-+# CONFIG_GPIO_MCP23S08 is not set
-+# CONFIG_W1 is not set
-+# CONFIG_POWER_SUPPLY is not set
-+# CONFIG_HWMON is not set
-+# CONFIG_THERMAL is not set
-+# CONFIG_THERMAL_HWMON is not set
-+CONFIG_WATCHDOG=y
-+CONFIG_WATCHDOG_NOWAYOUT=y
-+
-+#
-+# Watchdog Device Drivers
-+#
-+# CONFIG_SOFT_WATCHDOG is not set
-+CONFIG_OMAP_WATCHDOG=y
-+
-+#
-+# USB-based Watchdog Cards
-+#
-+# CONFIG_USBPCWATCHDOG is not set
-+CONFIG_SSB_POSSIBLE=y
-+
-+#
-+# Sonics Silicon Backplane
-+#
-+# CONFIG_SSB is not set
-+
-+#
-+# Multifunction device drivers
-+#
-+# CONFIG_MFD_CORE is not set
-+# CONFIG_MFD_SM501 is not set
-+# CONFIG_MFD_ASIC3 is not set
-+# CONFIG_HTC_EGPIO is not set
-+# CONFIG_HTC_PASIC3 is not set
-+CONFIG_TWL4030_CORE=y
-+# CONFIG_TWL4030_POWER is not set
-+# CONFIG_MFD_TMIO is not set
-+# CONFIG_MFD_T7L66XB is not set
-+# CONFIG_MFD_TC6387XB is not set
-+# CONFIG_MFD_TC6393XB is not set
-+# CONFIG_PMIC_DA903X is not set
-+# CONFIG_MFD_WM8400 is not set
-+# CONFIG_MFD_WM8350_I2C is not set
-+
-+#
-+# Multimedia devices
-+#
-+
-+#
-+# Multimedia core support
-+#
-+# CONFIG_VIDEO_DEV is not set
-+# CONFIG_DVB_CORE is not set
-+# CONFIG_VIDEO_MEDIA is not set
-+
-+#
-+# Multimedia drivers
-+#
-+CONFIG_DAB=y
-+# CONFIG_USB_DABUSB is not set
-+
-+#
-+# Graphics support
-+#
-+# CONFIG_VGASTATE is not set
-+CONFIG_VIDEO_OUTPUT_CONTROL=m
-+CONFIG_FB=y
-+# CONFIG_FIRMWARE_EDID is not set
-+# CONFIG_FB_DDC is not set
-+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-+CONFIG_FB_CFB_FILLRECT=m
-+CONFIG_FB_CFB_COPYAREA=m
-+CONFIG_FB_CFB_IMAGEBLIT=m
-+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-+# CONFIG_FB_SYS_FILLRECT is not set
-+# CONFIG_FB_SYS_COPYAREA is not set
-+# CONFIG_FB_SYS_IMAGEBLIT is not set
-+# CONFIG_FB_FOREIGN_ENDIAN is not set
-+# CONFIG_FB_SYS_FOPS is not set
-+# CONFIG_FB_SVGALIB is not set
-+# CONFIG_FB_MACMODES is not set
-+# CONFIG_FB_BACKLIGHT is not set
-+# CONFIG_FB_MODE_HELPERS is not set
-+# CONFIG_FB_TILEBLITTING is not set
-+
-+#
-+# Frame buffer hardware drivers
-+#
-+# CONFIG_FB_S1D13XXX is not set
-+# CONFIG_FB_VIRTUAL is not set
-+# CONFIG_FB_METRONOME is not set
-+# CONFIG_FB_MB862XX is not set
-+# CONFIG_FB_OMAP_LCD_VGA is not set
-+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
-+CONFIG_FB_OMAP2=m
-+CONFIG_FB_OMAP2_DEBUG=y
-+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-+CONFIG_FB_OMAP2_NUM_FBS=3
-+
-+#
-+# OMAP2/3 Display Device Drivers
-+#
-+CONFIG_PANEL_GENERIC=m
-+CONFIG_PANEL_SHARP_LS037V7DW01=m
-+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-+
-+#
-+# Display device support
-+#
-+# CONFIG_DISPLAY_SUPPORT is not set
-+
-+#
-+# Console display driver support
-+#
-+# CONFIG_VGA_CONSOLE is not set
-+CONFIG_DUMMY_CONSOLE=y
-+# CONFIG_FRAMEBUFFER_CONSOLE is not set
-+# CONFIG_LOGO is not set
-+# CONFIG_SOUND is not set
-+CONFIG_HID_SUPPORT=y
-+CONFIG_HID=y
-+# CONFIG_HID_DEBUG is not set
-+# CONFIG_HIDRAW is not set
-+
-+#
-+# USB Input Devices
-+#
-+CONFIG_USB_HID=y
-+# CONFIG_HID_PID is not set
-+# CONFIG_USB_HIDDEV is not set
-+
-+#
-+# Special HID drivers
-+#
-+CONFIG_HID_COMPAT=y
-+CONFIG_HID_A4TECH=y
-+CONFIG_HID_APPLE=y
-+CONFIG_HID_BELKIN=y
-+CONFIG_HID_BRIGHT=y
-+CONFIG_HID_CHERRY=y
-+CONFIG_HID_CHICONY=y
-+CONFIG_HID_CYPRESS=y
-+CONFIG_HID_DELL=y
-+CONFIG_HID_EZKEY=y
-+CONFIG_HID_GYRATION=y
-+CONFIG_HID_LOGITECH=y
-+# CONFIG_LOGITECH_FF is not set
-+# CONFIG_LOGIRUMBLEPAD2_FF is not set
-+CONFIG_HID_MICROSOFT=y
-+CONFIG_HID_MONTEREY=y
-+CONFIG_HID_PANTHERLORD=y
-+# CONFIG_PANTHERLORD_FF is not set
-+CONFIG_HID_PETALYNX=y
-+CONFIG_HID_SAMSUNG=y
-+CONFIG_HID_SONY=y
-+CONFIG_HID_SUNPLUS=y
-+# CONFIG_THRUSTMASTER_FF is not set
-+# CONFIG_ZEROPLUS_FF is not set
-+CONFIG_USB_SUPPORT=y
-+CONFIG_USB_ARCH_HAS_HCD=y
-+CONFIG_USB_ARCH_HAS_OHCI=y
-+CONFIG_USB_ARCH_HAS_EHCI=y
-+CONFIG_USB=y
-+CONFIG_USB_DEBUG=y
-+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-+
-+#
-+# Miscellaneous USB options
-+#
-+CONFIG_USB_DEVICEFS=y
-+# CONFIG_USB_DEVICE_CLASS is not set
-+# CONFIG_USB_DYNAMIC_MINORS is not set
-+CONFIG_USB_SUSPEND=y
-+CONFIG_USB_OTG=y
-+# CONFIG_USB_OTG_WHITELIST is not set
-+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-+CONFIG_USB_MON=y
-+# CONFIG_USB_WUSB is not set
-+# CONFIG_USB_WUSB_CBAF is not set
-+
-+#
-+# USB Host Controller Drivers
-+#
-+# CONFIG_USB_C67X00_HCD is not set
-+CONFIG_USB_EHCI_HCD=m
-+CONFIG_OMAP_EHCI_PHY_MODE=y
-+# CONFIG_OMAP_EHCI_TLL_MODE is not set
-+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-+# CONFIG_USB_ISP116X_HCD is not set
-+# CONFIG_USB_OHCI_HCD is not set
-+# CONFIG_USB_SL811_HCD is not set
-+# CONFIG_USB_R8A66597_HCD is not set
-+# CONFIG_USB_HWA_HCD is not set
-+CONFIG_USB_MUSB_HDRC=y
-+CONFIG_USB_MUSB_SOC=y
-+
-+#
-+# OMAP 343x high speed USB support
-+#
-+# CONFIG_USB_MUSB_HOST is not set
-+# CONFIG_USB_MUSB_PERIPHERAL is not set
-+CONFIG_USB_MUSB_OTG=y
-+CONFIG_USB_GADGET_MUSB_HDRC=y
-+CONFIG_USB_MUSB_HDRC_HCD=y
-+# CONFIG_MUSB_PIO_ONLY is not set
-+CONFIG_USB_INVENTRA_DMA=y
-+# CONFIG_USB_TI_CPPI_DMA is not set
-+# CONFIG_USB_MUSB_DEBUG is not set
-+
-+#
-+# USB Device Class drivers
-+#
-+# CONFIG_USB_ACM is not set
-+# CONFIG_USB_PRINTER is not set
-+# CONFIG_USB_WDM is not set
-+# CONFIG_USB_TMC is not set
-+
-+#
-+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-+#
-+
-+#
-+# see USB_STORAGE Help for more information
-+#
-+CONFIG_USB_STORAGE=y
-+CONFIG_USB_STORAGE_DEBUG=y
-+# CONFIG_USB_STORAGE_DATAFAB is not set
-+# CONFIG_USB_STORAGE_FREECOM is not set
-+# CONFIG_USB_STORAGE_ISD200 is not set
-+# CONFIG_USB_STORAGE_DPCM is not set
-+# CONFIG_USB_STORAGE_USBAT is not set
-+# CONFIG_USB_STORAGE_SDDR09 is not set
-+# CONFIG_USB_STORAGE_SDDR55 is not set
-+# CONFIG_USB_STORAGE_JUMPSHOT is not set
-+# CONFIG_USB_STORAGE_ALAUDA is not set
-+# CONFIG_USB_STORAGE_ONETOUCH is not set
-+# CONFIG_USB_STORAGE_KARMA is not set
-+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-+# CONFIG_USB_LIBUSUAL is not set
-+
-+#
-+# USB Imaging devices
-+#
-+# CONFIG_USB_MDC800 is not set
-+# CONFIG_USB_MICROTEK is not set
-+
-+#
-+# USB port drivers
-+#
-+# CONFIG_USB_SERIAL is not set
-+
-+#
-+# USB Miscellaneous drivers
-+#
-+# CONFIG_USB_EMI62 is not set
-+# CONFIG_USB_EMI26 is not set
-+# CONFIG_USB_ADUTUX is not set
-+# CONFIG_USB_SEVSEG is not set
-+# CONFIG_USB_RIO500 is not set
-+# CONFIG_USB_LEGOTOWER is not set
-+# CONFIG_USB_LCD is not set
-+# CONFIG_USB_BERRY_CHARGE is not set
-+# CONFIG_USB_LED is not set
-+# CONFIG_USB_CYPRESS_CY7C63 is not set
-+# CONFIG_USB_CYTHERM is not set
-+# CONFIG_USB_PHIDGET is not set
-+# CONFIG_USB_IDMOUSE is not set
-+# CONFIG_USB_FTDI_ELAN is not set
-+# CONFIG_USB_APPLEDISPLAY is not set
-+# CONFIG_USB_SISUSBVGA is not set
-+# CONFIG_USB_LD is not set
-+# CONFIG_USB_TRANCEVIBRATOR is not set
-+# CONFIG_USB_IOWARRIOR is not set
-+CONFIG_USB_TEST=y
-+# CONFIG_USB_ISIGHTFW is not set
-+# CONFIG_USB_VST is not set
-+CONFIG_USB_GADGET=y
-+CONFIG_USB_GADGET_DEBUG=y
-+CONFIG_USB_GADGET_DEBUG_FILES=y
-+# CONFIG_USB_GADGET_DEBUG_FS is not set
-+CONFIG_USB_GADGET_VBUS_DRAW=2
-+CONFIG_USB_GADGET_SELECTED=y
-+# CONFIG_USB_GADGET_AT91 is not set
-+# CONFIG_USB_GADGET_ATMEL_USBA is not set
-+# CONFIG_USB_GADGET_FSL_USB2 is not set
-+# CONFIG_USB_GADGET_LH7A40X is not set
-+# CONFIG_USB_GADGET_OMAP is not set
-+# CONFIG_USB_GADGET_PXA25X is not set
-+# CONFIG_USB_GADGET_PXA27X is not set
-+# CONFIG_USB_GADGET_S3C2410 is not set
-+# CONFIG_USB_GADGET_M66592 is not set
-+# CONFIG_USB_GADGET_AMD5536UDC is not set
-+# CONFIG_USB_GADGET_FSL_QE is not set
-+# CONFIG_USB_GADGET_NET2280 is not set
-+# CONFIG_USB_GADGET_GOKU is not set
-+# CONFIG_USB_GADGET_DUMMY_HCD is not set
-+CONFIG_USB_GADGET_DUALSPEED=y
-+CONFIG_USB_ZERO=m
-+# CONFIG_USB_ZERO_HNPTEST is not set
-+# CONFIG_USB_ETH is not set
-+# CONFIG_USB_GADGETFS is not set
-+# CONFIG_USB_FILE_STORAGE is not set
-+# CONFIG_USB_G_SERIAL is not set
-+# CONFIG_USB_MIDI_GADGET is not set
-+# CONFIG_USB_G_PRINTER is not set
-+# CONFIG_USB_CDC_COMPOSITE is not set
-+
-+#
-+# OTG and related infrastructure
-+#
-+CONFIG_USB_OTG_UTILS=y
-+# CONFIG_USB_GPIO_VBUS is not set
-+# CONFIG_ISP1301_OMAP is not set
-+CONFIG_TWL4030_USB=y
-+CONFIG_MMC=y
-+# CONFIG_MMC_DEBUG is not set
-+# CONFIG_MMC_UNSAFE_RESUME is not set
-+
-+#
-+# MMC/SD/SDIO Card Drivers
-+#
-+CONFIG_MMC_BLOCK=y
-+CONFIG_MMC_BLOCK_BOUNCE=y
-+# CONFIG_SDIO_UART is not set
-+# CONFIG_MMC_TEST is not set
-+
-+#
-+# MMC/SD/SDIO Host Controller Drivers
-+#
-+# CONFIG_MMC_SDHCI is not set
-+CONFIG_MMC_OMAP_HS=m
-+# CONFIG_MMC_SPI is not set
-+# CONFIG_MEMSTICK is not set
-+# CONFIG_ACCESSIBILITY is not set
-+# CONFIG_NEW_LEDS is not set
-+CONFIG_RTC_LIB=y
-+CONFIG_RTC_CLASS=y
-+CONFIG_RTC_HCTOSYS=y
-+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-+# CONFIG_RTC_DEBUG is not set
-+
-+#
-+# RTC interfaces
-+#
-+CONFIG_RTC_INTF_SYSFS=y
-+CONFIG_RTC_INTF_PROC=y
-+CONFIG_RTC_INTF_DEV=y
-+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-+# CONFIG_RTC_DRV_TEST is not set
-+
-+#
-+# I2C RTC drivers
-+#
-+# CONFIG_RTC_DRV_DS1307 is not set
-+# CONFIG_RTC_DRV_DS1374 is not set
-+# CONFIG_RTC_DRV_DS1672 is not set
-+# CONFIG_RTC_DRV_MAX6900 is not set
-+# CONFIG_RTC_DRV_RS5C372 is not set
-+# CONFIG_RTC_DRV_ISL1208 is not set
-+# CONFIG_RTC_DRV_X1205 is not set
-+# CONFIG_RTC_DRV_PCF8563 is not set
-+# CONFIG_RTC_DRV_PCF8583 is not set
-+# CONFIG_RTC_DRV_M41T80 is not set
-+CONFIG_RTC_DRV_TWL4030=y
-+# CONFIG_RTC_DRV_S35390A is not set
-+# CONFIG_RTC_DRV_FM3130 is not set
-+# CONFIG_RTC_DRV_RX8581 is not set
-+
-+#
-+# SPI RTC drivers
-+#
-+# CONFIG_RTC_DRV_M41T94 is not set
-+# CONFIG_RTC_DRV_DS1305 is not set
-+# CONFIG_RTC_DRV_DS1390 is not set
-+# CONFIG_RTC_DRV_MAX6902 is not set
-+# CONFIG_RTC_DRV_R9701 is not set
-+# CONFIG_RTC_DRV_RS5C348 is not set
-+# CONFIG_RTC_DRV_DS3234 is not set
-+
-+#
-+# Platform RTC drivers
-+#
-+# CONFIG_RTC_DRV_CMOS is not set
-+# CONFIG_RTC_DRV_DS1286 is not set
-+# CONFIG_RTC_DRV_DS1511 is not set
-+# CONFIG_RTC_DRV_DS1553 is not set
-+# CONFIG_RTC_DRV_DS1742 is not set
-+# CONFIG_RTC_DRV_STK17TA8 is not set
-+# CONFIG_RTC_DRV_M48T86 is not set
-+# CONFIG_RTC_DRV_M48T35 is not set
-+# CONFIG_RTC_DRV_M48T59 is not set
-+# CONFIG_RTC_DRV_BQ4802 is not set
-+# CONFIG_RTC_DRV_V3020 is not set
-+
-+#
-+# on-CPU RTC drivers
-+#
-+# CONFIG_DMADEVICES is not set
-+# CONFIG_REGULATOR is not set
-+# CONFIG_UIO is not set
-+
-+#
-+# CBUS support
-+#
-+# CONFIG_CBUS is not set
-+
-+#
-+# File systems
-+#
-+CONFIG_EXT2_FS=y
-+# CONFIG_EXT2_FS_XATTR is not set
-+# CONFIG_EXT2_FS_XIP is not set
-+CONFIG_EXT3_FS=y
-+# CONFIG_EXT3_FS_XATTR is not set
-+# CONFIG_EXT4_FS is not set
-+CONFIG_JBD=y
-+# CONFIG_JBD_DEBUG is not set
-+# CONFIG_REISERFS_FS is not set
-+# CONFIG_JFS_FS is not set
-+# CONFIG_FS_POSIX_ACL is not set
-+CONFIG_FILE_LOCKING=y
-+# CONFIG_XFS_FS is not set
-+# CONFIG_OCFS2_FS is not set
-+CONFIG_DNOTIFY=y
-+CONFIG_INOTIFY=y
-+CONFIG_INOTIFY_USER=y
-+CONFIG_QUOTA=y
-+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-+CONFIG_PRINT_QUOTA_WARNING=y
-+# CONFIG_QFMT_V1 is not set
-+CONFIG_QFMT_V2=y
-+CONFIG_QUOTACTL=y
-+# CONFIG_AUTOFS_FS is not set
-+# CONFIG_AUTOFS4_FS is not set
-+# CONFIG_FUSE_FS is not set
-+
-+#
-+# CD-ROM/DVD Filesystems
-+#
-+# CONFIG_ISO9660_FS is not set
-+# CONFIG_UDF_FS is not set
-+
-+#
-+# DOS/FAT/NT Filesystems
-+#
-+CONFIG_FAT_FS=y
-+CONFIG_MSDOS_FS=y
-+CONFIG_VFAT_FS=y
-+CONFIG_FAT_DEFAULT_CODEPAGE=437
-+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-+# CONFIG_NTFS_FS is not set
-+
-+#
-+# Pseudo filesystems
-+#
-+CONFIG_PROC_FS=y
-+CONFIG_PROC_SYSCTL=y
-+CONFIG_PROC_PAGE_MONITOR=y
-+CONFIG_SYSFS=y
-+CONFIG_TMPFS=y
-+# CONFIG_TMPFS_POSIX_ACL is not set
-+# CONFIG_HUGETLB_PAGE is not set
-+# CONFIG_CONFIGFS_FS is not set
-+
-+#
-+# Miscellaneous filesystems
-+#
-+# CONFIG_ADFS_FS is not set
-+# CONFIG_AFFS_FS is not set
-+# CONFIG_HFS_FS is not set
-+# CONFIG_HFSPLUS_FS is not set
-+# CONFIG_BEFS_FS is not set
-+# CONFIG_BFS_FS is not set
-+# CONFIG_EFS_FS is not set
-+CONFIG_JFFS2_FS=y
-+CONFIG_JFFS2_FS_DEBUG=0
-+CONFIG_JFFS2_FS_WRITEBUFFER=y
-+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-+# CONFIG_JFFS2_SUMMARY is not set
-+# CONFIG_JFFS2_FS_XATTR is not set
-+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-+CONFIG_JFFS2_ZLIB=y
-+# CONFIG_JFFS2_LZO is not set
-+CONFIG_JFFS2_RTIME=y
-+# CONFIG_JFFS2_RUBIN is not set
-+# CONFIG_JFFS2_CMODE_NONE is not set
-+CONFIG_JFFS2_CMODE_PRIORITY=y
-+# CONFIG_JFFS2_CMODE_SIZE is not set
-+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-+# CONFIG_CRAMFS is not set
-+# CONFIG_VXFS_FS is not set
-+# CONFIG_MINIX_FS is not set
-+# CONFIG_OMFS_FS is not set
-+# CONFIG_HPFS_FS is not set
-+# CONFIG_QNX4FS_FS is not set
-+# CONFIG_ROMFS_FS is not set
-+# CONFIG_SYSV_FS is not set
-+# CONFIG_UFS_FS is not set
-+CONFIG_NETWORK_FILESYSTEMS=y
-+CONFIG_NFS_FS=y
-+CONFIG_NFS_V3=y
-+# CONFIG_NFS_V3_ACL is not set
-+CONFIG_NFS_V4=y
-+CONFIG_ROOT_NFS=y
-+# CONFIG_NFSD is not set
-+CONFIG_LOCKD=y
-+CONFIG_LOCKD_V4=y
-+CONFIG_NFS_COMMON=y
-+CONFIG_SUNRPC=y
-+CONFIG_SUNRPC_GSS=y
-+# CONFIG_SUNRPC_REGISTER_V4 is not set
-+CONFIG_RPCSEC_GSS_KRB5=y
-+# CONFIG_RPCSEC_GSS_SPKM3 is not set
-+# CONFIG_SMB_FS is not set
-+# CONFIG_CIFS is not set
-+# CONFIG_NCP_FS is not set
-+# CONFIG_CODA_FS is not set
-+# CONFIG_AFS_FS is not set
-+
-+#
-+# Partition Types
-+#
-+CONFIG_PARTITION_ADVANCED=y
-+# CONFIG_ACORN_PARTITION is not set
-+# CONFIG_OSF_PARTITION is not set
-+# CONFIG_AMIGA_PARTITION is not set
-+# CONFIG_ATARI_PARTITION is not set
-+# CONFIG_MAC_PARTITION is not set
-+CONFIG_MSDOS_PARTITION=y
-+# CONFIG_BSD_DISKLABEL is not set
-+# CONFIG_MINIX_SUBPARTITION is not set
-+# CONFIG_SOLARIS_X86_PARTITION is not set
-+# CONFIG_UNIXWARE_DISKLABEL is not set
-+# CONFIG_LDM_PARTITION is not set
-+# CONFIG_SGI_PARTITION is not set
-+# CONFIG_ULTRIX_PARTITION is not set
-+# CONFIG_SUN_PARTITION is not set
-+# CONFIG_KARMA_PARTITION is not set
-+# CONFIG_EFI_PARTITION is not set
-+# CONFIG_SYSV68_PARTITION is not set
-+CONFIG_NLS=y
-+CONFIG_NLS_DEFAULT="iso8859-1"
-+CONFIG_NLS_CODEPAGE_437=y
-+# CONFIG_NLS_CODEPAGE_737 is not set
-+# CONFIG_NLS_CODEPAGE_775 is not set
-+# CONFIG_NLS_CODEPAGE_850 is not set
-+# CONFIG_NLS_CODEPAGE_852 is not set
-+# CONFIG_NLS_CODEPAGE_855 is not set
-+# CONFIG_NLS_CODEPAGE_857 is not set
-+# CONFIG_NLS_CODEPAGE_860 is not set
-+# CONFIG_NLS_CODEPAGE_861 is not set
-+# CONFIG_NLS_CODEPAGE_862 is not set
-+# CONFIG_NLS_CODEPAGE_863 is not set
-+# CONFIG_NLS_CODEPAGE_864 is not set
-+# CONFIG_NLS_CODEPAGE_865 is not set
-+# CONFIG_NLS_CODEPAGE_866 is not set
-+# CONFIG_NLS_CODEPAGE_869 is not set
-+# CONFIG_NLS_CODEPAGE_936 is not set
-+# CONFIG_NLS_CODEPAGE_950 is not set
-+# CONFIG_NLS_CODEPAGE_932 is not set
-+# CONFIG_NLS_CODEPAGE_949 is not set
-+# CONFIG_NLS_CODEPAGE_874 is not set
-+# CONFIG_NLS_ISO8859_8 is not set
-+# CONFIG_NLS_CODEPAGE_1250 is not set
-+# CONFIG_NLS_CODEPAGE_1251 is not set
-+# CONFIG_NLS_ASCII is not set
-+CONFIG_NLS_ISO8859_1=y
-+# CONFIG_NLS_ISO8859_2 is not set
-+# CONFIG_NLS_ISO8859_3 is not set
-+# CONFIG_NLS_ISO8859_4 is not set
-+# CONFIG_NLS_ISO8859_5 is not set
-+# CONFIG_NLS_ISO8859_6 is not set
-+# CONFIG_NLS_ISO8859_7 is not set
-+# CONFIG_NLS_ISO8859_9 is not set
-+# CONFIG_NLS_ISO8859_13 is not set
-+# CONFIG_NLS_ISO8859_14 is not set
-+# CONFIG_NLS_ISO8859_15 is not set
-+# CONFIG_NLS_KOI8_R is not set
-+# CONFIG_NLS_KOI8_U is not set
-+# CONFIG_NLS_UTF8 is not set
-+# CONFIG_DLM is not set
-+
-+#
-+# Kernel hacking
-+#
-+# CONFIG_PRINTK_TIME is not set
-+CONFIG_ENABLE_WARN_DEPRECATED=y
-+CONFIG_ENABLE_MUST_CHECK=y
-+CONFIG_FRAME_WARN=1024
-+CONFIG_MAGIC_SYSRQ=y
-+# CONFIG_UNUSED_SYMBOLS is not set
-+CONFIG_DEBUG_FS=y
-+# CONFIG_HEADERS_CHECK is not set
-+CONFIG_DEBUG_KERNEL=y
-+# CONFIG_DEBUG_SHIRQ is not set
-+CONFIG_DETECT_SOFTLOCKUP=y
-+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-+CONFIG_SCHED_DEBUG=y
-+# CONFIG_SCHEDSTATS is not set
-+# CONFIG_TIMER_STATS is not set
-+# CONFIG_DEBUG_OBJECTS is not set
-+# CONFIG_DEBUG_SLAB is not set
-+# CONFIG_DEBUG_RT_MUTEXES is not set
-+# CONFIG_RT_MUTEX_TESTER is not set
-+# CONFIG_DEBUG_SPINLOCK is not set
-+CONFIG_DEBUG_MUTEXES=y
-+# CONFIG_DEBUG_LOCK_ALLOC is not set
-+# CONFIG_PROVE_LOCKING is not set
-+# CONFIG_LOCK_STAT is not set
-+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-+# CONFIG_DEBUG_KOBJECT is not set
-+CONFIG_DEBUG_BUGVERBOSE=y
-+CONFIG_DEBUG_INFO=y
-+# CONFIG_DEBUG_VM is not set
-+# CONFIG_DEBUG_WRITECOUNT is not set
-+# CONFIG_DEBUG_MEMORY_INIT is not set
-+# CONFIG_DEBUG_LIST is not set
-+# CONFIG_DEBUG_SG is not set
-+CONFIG_FRAME_POINTER=y
-+# CONFIG_BOOT_PRINTK_DELAY is not set
-+# CONFIG_RCU_TORTURE_TEST is not set
-+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-+# CONFIG_BACKTRACE_SELF_TEST is not set
-+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-+# CONFIG_FAULT_INJECTION is not set
-+# CONFIG_LATENCYTOP is not set
-+CONFIG_HAVE_FUNCTION_TRACER=y
-+
-+#
-+# Tracers
-+#
-+# CONFIG_FUNCTION_TRACER is not set
-+# CONFIG_IRQSOFF_TRACER is not set
-+# CONFIG_SCHED_TRACER is not set
-+# CONFIG_CONTEXT_SWITCH_TRACER is not set
-+# CONFIG_BOOT_TRACER is not set
-+# CONFIG_STACK_TRACER is not set
-+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-+# CONFIG_SAMPLES is not set
-+CONFIG_HAVE_ARCH_KGDB=y
-+# CONFIG_KGDB is not set
-+CONFIG_DEBUG_USER=y
-+CONFIG_DEBUG_ERRORS=y
-+# CONFIG_DEBUG_STACK_USAGE is not set
-+# CONFIG_DEBUG_LL is not set
-+
-+#
-+# Security options
-+#
-+# CONFIG_KEYS is not set
-+# CONFIG_SECURITY is not set
-+# CONFIG_SECURITYFS is not set
-+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-+CONFIG_CRYPTO=y
-+
-+#
-+# Crypto core or helper
-+#
-+# CONFIG_CRYPTO_FIPS is not set
-+CONFIG_CRYPTO_ALGAPI=y
-+CONFIG_CRYPTO_ALGAPI2=y
-+CONFIG_CRYPTO_AEAD2=y
-+CONFIG_CRYPTO_BLKCIPHER=y
-+CONFIG_CRYPTO_BLKCIPHER2=y
-+CONFIG_CRYPTO_HASH2=y
-+CONFIG_CRYPTO_RNG2=y
-+CONFIG_CRYPTO_MANAGER=y
-+CONFIG_CRYPTO_MANAGER2=y
-+# CONFIG_CRYPTO_GF128MUL is not set
-+# CONFIG_CRYPTO_NULL is not set
-+# CONFIG_CRYPTO_CRYPTD is not set
-+# CONFIG_CRYPTO_AUTHENC is not set
-+# CONFIG_CRYPTO_TEST is not set
-+
-+#
-+# Authenticated Encryption with Associated Data
-+#
-+# CONFIG_CRYPTO_CCM is not set
-+# CONFIG_CRYPTO_GCM is not set
-+# CONFIG_CRYPTO_SEQIV is not set
-+
-+#
-+# Block modes
-+#
-+CONFIG_CRYPTO_CBC=y
-+# CONFIG_CRYPTO_CTR is not set
-+# CONFIG_CRYPTO_CTS is not set
-+CONFIG_CRYPTO_ECB=m
-+# CONFIG_CRYPTO_LRW is not set
-+CONFIG_CRYPTO_PCBC=m
-+# CONFIG_CRYPTO_XTS is not set
-+
-+#
-+# Hash modes
-+#
-+# CONFIG_CRYPTO_HMAC is not set
-+# CONFIG_CRYPTO_XCBC is not set
-+
-+#
-+# Digest
-+#
-+# CONFIG_CRYPTO_CRC32C is not set
-+# CONFIG_CRYPTO_MD4 is not set
-+CONFIG_CRYPTO_MD5=y
-+# CONFIG_CRYPTO_MICHAEL_MIC is not set
-+# CONFIG_CRYPTO_RMD128 is not set
-+# CONFIG_CRYPTO_RMD160 is not set
-+# CONFIG_CRYPTO_RMD256 is not set
-+# CONFIG_CRYPTO_RMD320 is not set
-+# CONFIG_CRYPTO_SHA1 is not set
-+# CONFIG_CRYPTO_SHA256 is not set
-+# CONFIG_CRYPTO_SHA512 is not set
-+# CONFIG_CRYPTO_TGR192 is not set
-+# CONFIG_CRYPTO_WP512 is not set
-+
-+#
-+# Ciphers
-+#
-+# CONFIG_CRYPTO_AES is not set
-+# CONFIG_CRYPTO_ANUBIS is not set
-+# CONFIG_CRYPTO_ARC4 is not set
-+# CONFIG_CRYPTO_BLOWFISH is not set
-+# CONFIG_CRYPTO_CAMELLIA is not set
-+# CONFIG_CRYPTO_CAST5 is not set
-+# CONFIG_CRYPTO_CAST6 is not set
-+CONFIG_CRYPTO_DES=y
-+# CONFIG_CRYPTO_FCRYPT is not set
-+# CONFIG_CRYPTO_KHAZAD is not set
-+# CONFIG_CRYPTO_SALSA20 is not set
-+# CONFIG_CRYPTO_SEED is not set
-+# CONFIG_CRYPTO_SERPENT is not set
-+# CONFIG_CRYPTO_TEA is not set
-+# CONFIG_CRYPTO_TWOFISH is not set
-+
-+#
-+# Compression
-+#
-+# CONFIG_CRYPTO_DEFLATE is not set
-+# CONFIG_CRYPTO_LZO is not set
-+
-+#
-+# Random Number Generation
-+#
-+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-+CONFIG_CRYPTO_HW=y
-+
-+#
-+# Library routines
-+#
-+CONFIG_BITREVERSE=y
-+CONFIG_CRC_CCITT=y
-+# CONFIG_CRC16 is not set
-+# CONFIG_CRC_T10DIF is not set
-+# CONFIG_CRC_ITU_T is not set
-+CONFIG_CRC32=y
-+# CONFIG_CRC7 is not set
-+CONFIG_LIBCRC32C=y
-+CONFIG_ZLIB_INFLATE=y
-+CONFIG_ZLIB_DEFLATE=y
-+CONFIG_PLIST=y
-+CONFIG_HAS_IOMEM=y
-+CONFIG_HAS_IOPORT=y
-+CONFIG_HAS_DMA=y
-diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
-index ade186b..529322f 100644
---- a/arch/arm/mach-omap2/board-3430sdp.c
-+++ b/arch/arm/mach-omap2/board-3430sdp.c
-@@ -39,6 +39,7 @@
- #include <mach/keypad.h>
- #include <mach/dma.h>
- #include <mach/gpmc.h>
-+#include <mach/display.h>
- 
- #include <asm/io.h>
- #include <asm/delay.h>
-@@ -238,14 +239,214 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
- 	},
- };
- 
--static struct platform_device sdp3430_lcd_device = {
--	.name		= "sdp2430_lcd",
--	.id		= -1,
-+
-+#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
-+#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
-+#if 0
-+#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	24
-+#define SDP3430_LCD_PANEL_ENABLE_GPIO		28
-+#else
-+#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
-+#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
-+#endif
-+
-+#define PM_RECEIVER             TWL4030_MODULE_PM_RECEIVER
-+#define ENABLE_VAUX2_DEDICATED  0x09
-+#define ENABLE_VAUX2_DEV_GRP    0x20
-+#define ENABLE_VAUX3_DEDICATED	0x03
-+#define ENABLE_VAUX3_DEV_GRP	0x20
-+
-+#define ENABLE_VPLL2_DEDICATED	0x05
-+#define ENABLE_VPLL2_DEV_GRP	0xE0
-+#define TWL4030_VPLL2_DEV_GRP	0x33
-+#define TWL4030_VPLL2_DEDICATED	0x36
-+
-+#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
-+
-+static unsigned backlight_gpio;
-+static unsigned enable_gpio;
-+static int lcd_enabled;
-+static int dvi_enabled;
-+
-+static void __init sdp3430_display_init(void)
-+{
-+	int r;
-+
-+	enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
-+	backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
-+
-+	r = gpio_request(enable_gpio, "LCD reset");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD reset GPIO\n");
-+		goto err0;
-+	}
-+
-+	r = gpio_request(backlight_gpio, "LCD Backlight");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD backlight GPIO\n");
-+		goto err1;
-+	}
-+
-+	gpio_direction_output(enable_gpio, 0);
-+	gpio_direction_output(backlight_gpio, 0);
-+
-+	return;
-+err1:
-+	gpio_free(enable_gpio);
-+err0:
-+	return;
-+}
-+
-+
-+static int sdp3430_panel_enable_lcd(struct omap_display *display)
-+{
-+	u8 ded_val, ded_reg;
-+	u8 grp_val, grp_reg;
-+
-+	if (dvi_enabled) {
-+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-+		return -EINVAL;
-+	}
-+
-+	if (omap_rev() > OMAP3430_REV_ES1_0) {
-+		t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
-+				TWL4030_VPLL2_DEDICATED);
-+		t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
-+				TWL4030_VPLL2_DEV_GRP);
-+	}
-+
-+	ded_reg = TWL4030_VAUX3_DEDICATED;
-+	ded_val = ENABLE_VAUX3_DEDICATED;
-+	grp_reg = TWL4030_VAUX3_DEV_GRP;
-+	grp_val = ENABLE_VAUX3_DEV_GRP;
-+
-+	gpio_direction_output(enable_gpio, 1);
-+	gpio_direction_output(backlight_gpio, 1);
-+
-+	if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
-+		return -EIO;
-+	if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
-+		return -EIO;
-+
-+	lcd_enabled = 1;
-+
-+	return 0;
-+}
-+
-+static void sdp3430_panel_disable_lcd(struct omap_display *display)
-+{
-+	lcd_enabled = 0;
-+
-+	gpio_direction_output(enable_gpio, 0);
-+	gpio_direction_output(backlight_gpio, 0);
-+
-+	if (omap_rev() > OMAP3430_REV_ES1_0) {
-+		t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
-+		t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
-+		mdelay(4);
-+	}
-+}
-+
-+static struct omap_display_data sdp3430_display_data = {
-+	.type = OMAP_DISPLAY_TYPE_DPI,
-+	.name = "lcd",
-+	.panel_name = "sharp-ls037v7dw01",
-+	.u.dpi.data_lines = 16,
-+	.panel_enable = sdp3430_panel_enable_lcd,
-+	.panel_disable = sdp3430_panel_disable_lcd,
-+};
-+
-+static int sdp3430_panel_enable_dvi(struct omap_display *display)
-+{
-+	if (lcd_enabled) {
-+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-+		return -EINVAL;
-+	}
-+
-+	if (omap_rev() > OMAP3430_REV_ES1_0) {
-+		t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
-+				TWL4030_VPLL2_DEDICATED);
-+		t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
-+				TWL4030_VPLL2_DEV_GRP);
-+	}
-+
-+	dvi_enabled = 1;
-+
-+	return 0;
-+}
-+
-+static void sdp3430_panel_disable_dvi(struct omap_display *display)
-+{
-+	dvi_enabled = 0;
-+
-+	if (omap_rev() > OMAP3430_REV_ES1_0) {
-+		t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
-+		t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
-+		mdelay(4);
-+	}
-+}
-+
-+
-+static struct omap_display_data sdp3430_display_data_dvi = {
-+	.type = OMAP_DISPLAY_TYPE_DPI,
-+	.name = "dvi",
-+	.panel_name = "panel-generic",
-+	.u.dpi.data_lines = 24,
-+	.panel_enable = sdp3430_panel_enable_dvi,
-+	.panel_disable = sdp3430_panel_disable_dvi,
- };
- 
-+static int sdp3430_panel_enable_tv(struct omap_display *display)
-+{
-+#define ENABLE_VDAC_DEDICATED           0x03
-+#define ENABLE_VDAC_DEV_GRP             0x20
-+
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VDAC_DEDICATED,
-+			TWL4030_VDAC_DEDICATED);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
-+
-+	return 0;
-+}
-+
-+static void sdp3430_panel_disable_tv(struct omap_display *display)
-+{
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
-+			TWL4030_VDAC_DEDICATED);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
-+			TWL4030_VDAC_DEV_GRP);
-+}
-+
-+static struct omap_display_data sdp3430_display_data_tv = {
-+	.type = OMAP_DISPLAY_TYPE_VENC,
-+	.name = "tv",
-+	.u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-+	.panel_enable = sdp3430_panel_enable_tv,
-+	.panel_disable = sdp3430_panel_disable_tv,
-+};
-+
-+static struct omap_dss_platform_data sdp3430_dss_data = {
-+	.num_displays = 3,
-+	.displays = {
-+		&sdp3430_display_data,
-+		&sdp3430_display_data_dvi,
-+		&sdp3430_display_data_tv,
-+	}
-+};
-+
-+static struct platform_device sdp3430_dss_device = {
-+	.name          = "omap-dss",
-+	.id            = -1,
-+	.dev            = {
-+		.platform_data = &sdp3430_dss_data,
-+	},
-+};
-+
-+
- static struct platform_device *sdp3430_devices[] __initdata = {
- 	&sdp3430_smc91x_device,
--	&sdp3430_lcd_device,
-+	&sdp3430_dss_device,
- };
- 
- static inline void __init sdp3430_init_smc91x(void)
-@@ -292,13 +493,8 @@ static struct omap_uart_config sdp3430_uart_config __initdata = {
- 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
- };
- 
--static struct omap_lcd_config sdp3430_lcd_config __initdata = {
--	.ctrl_name	= "internal",
--};
--
- static struct omap_board_config_kernel sdp3430_config[] __initdata = {
- 	{ OMAP_TAG_UART,	&sdp3430_uart_config },
--	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
- };
- 
- static int sdp3430_batt_table[] = {
-@@ -481,6 +677,7 @@ static void __init omap_3430sdp_init(void)
- 	usb_musb_init();
- 	usb_ehci_init();
- 	twl4030_mmc_init(mmc);
-+	sdp3430_display_init();
- }
- 
- static void __init omap_3430sdp_map_io(void)
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0007-DSS-Support-for-OMAP3-EVM-board.patch b/recipes/linux/linux-omap-pm/0007-DSS-Support-for-OMAP3-EVM-board.patch
deleted file mode 100644
index fb12ea4c03..0000000000
--- a/recipes/linux/linux-omap-pm/0007-DSS-Support-for-OMAP3-EVM-board.patch
+++ /dev/null
@@ -1,255 +0,0 @@
-From 98b4c02ad7229074414bc51bae1452fe93ab5111 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Mon, 5 Jan 2009 14:57:32 +0200
-Subject: [PATCH] DSS: Support for OMAP3 EVM board
-
-Coded by Vaibhav Hiremath <hvaibhav@ti.com>
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- arch/arm/mach-omap2/board-omap3evm.c |  203 ++++++++++++++++++++++++++++++++-
- 1 files changed, 196 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
-index e4e60e2..e7ec9e6 100644
---- a/arch/arm/mach-omap2/board-omap3evm.c
-+++ b/arch/arm/mach-omap2/board-omap3evm.c
-@@ -36,6 +36,7 @@
- #include <mach/usb-ehci.h>
- #include <mach/common.h>
- #include <mach/mcspi.h>
-+#include <mach/display.h>
- 
- #include "sdram-micron-mt46h32m32lf-6.h"
- #include "twl4030-generic-scripts.h"
-@@ -160,13 +161,201 @@ static int __init omap3_evm_i2c_init(void)
- 	return 0;
- }
- 
--static struct platform_device omap3_evm_lcd_device = {
--	.name		= "omap3evm_lcd",
--	.id		= -1,
-+#define LCD_PANEL_LR		2
-+#define LCD_PANEL_UD		3
-+#define LCD_PANEL_INI		152
-+#define LCD_PANEL_ENABLE_GPIO	153
-+#define LCD_PANEL_QVGA		154
-+#define LCD_PANEL_RESB		155
-+
-+#define ENABLE_VDAC_DEDICATED	0x03
-+#define ENABLE_VDAC_DEV_GRP	0x20
-+#define ENABLE_VPLL2_DEDICATED	0x05
-+#define ENABLE_VPLL2_DEV_GRP	0xE0
-+
-+#define TWL4030_GPIODATA_IN3	0x03
-+#define TWL4030_GPIODATA_DIR3	0x06
-+#define TWL4030_VPLL2_DEV_GRP	0x33
-+#define TWL4030_VPLL2_DEDICATED	0x36
-+
-+static int lcd_enabled;
-+static int dvi_enabled;
-+
-+static void __init omap3_evm_display_init(void)
-+{
-+	int r;
-+	r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD_PANEL_LR\n");
-+		return;
-+	}
-+	r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD_PANEL_UD\n");
-+		goto err_1;
-+	}
-+
-+	r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD_PANEL_INI\n");
-+		goto err_2;
-+	}
-+	r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD_PANEL_RESB\n");
-+		goto err_3;
-+	}
-+	r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga");
-+	if (r) {
-+		printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n");
-+		goto err_4;
-+	}
-+
-+	gpio_direction_output(LCD_PANEL_LR, 0);
-+	gpio_direction_output(LCD_PANEL_UD, 0);
-+	gpio_direction_output(LCD_PANEL_INI, 0);
-+	gpio_direction_output(LCD_PANEL_RESB, 0);
-+	gpio_direction_output(LCD_PANEL_QVGA, 0);
-+
-+#define TWL_LED_LEDEN           0x00
-+#define TWL_PWMA_PWMAON         0x00
-+#define TWL_PWMA_PWMAOFF        0x01
-+
-+	twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
-+
-+	gpio_direction_output(LCD_PANEL_RESB, 1);
-+	gpio_direction_output(LCD_PANEL_INI, 1);
-+	gpio_direction_output(LCD_PANEL_QVGA, 0);
-+	gpio_direction_output(LCD_PANEL_LR, 1);
-+	gpio_direction_output(LCD_PANEL_UD, 1);
-+
-+	return;
-+
-+err_4:
-+	gpio_free(LCD_PANEL_RESB);
-+err_3:
-+	gpio_free(LCD_PANEL_INI);
-+err_2:
-+	gpio_free(LCD_PANEL_UD);
-+err_1:
-+	gpio_free(LCD_PANEL_LR);
-+
-+}
-+
-+static int omap3_evm_panel_enable_lcd(struct omap_display *display)
-+{
-+	if (dvi_enabled) {
-+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
-+		return -EINVAL;
-+	}
-+	if (omap_rev() > OMAP3430_REV_ES1_0) {
-+		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED);
-+		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP);
-+	}
-+	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
-+	lcd_enabled = 1;
-+	return 0;
-+}
-+
-+static void omap3_evm_panel_disable_lcd(struct omap_display *display)
-+{
-+	if (omap_rev() > OMAP3430_REV_ES1_0) {
-+		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
-+				TWL4030_VPLL2_DEDICATED);
-+		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
-+				TWL4030_VPLL2_DEV_GRP);
-+	}
-+	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
-+	lcd_enabled = 0;
-+}
-+
-+static struct omap_display_data omap3_evm_display_data = {
-+	.type = OMAP_DISPLAY_TYPE_DPI,
-+	.name = "lcd",
-+	.panel_name = "sharp-ls037v7dw01",
-+	.u.dpi.data_lines = 18,
-+	.panel_enable = omap3_evm_panel_enable_lcd,
-+	.panel_disable = omap3_evm_panel_disable_lcd,
- };
- 
--static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
--	.ctrl_name	= "internal",
-+static int omap3_evm_panel_enable_tv(struct omap_display *display)
-+{
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
-+			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
-+	return 0;
-+}
-+
-+static void omap3_evm_panel_disable_tv(struct omap_display *display)
-+{
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
-+			TWL4030_VDAC_DEDICATED);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
-+			TWL4030_VDAC_DEV_GRP);
-+}
-+
-+static struct omap_display_data omap3_evm_display_data_tv = {
-+	.type = OMAP_DISPLAY_TYPE_VENC,
-+	.name = "tv",
-+	.u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
-+	.panel_enable = omap3_evm_panel_enable_tv,
-+	.panel_disable = omap3_evm_panel_disable_tv,
-+};
-+
-+
-+static int omap3_evm_panel_enable_dvi(struct omap_display *display)
-+{
-+	if (lcd_enabled) {
-+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
-+		return -EINVAL;
-+	}
-+	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80,
-+			TWL4030_GPIODATA_IN3);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80,
-+			TWL4030_GPIODATA_DIR3);
-+	dvi_enabled = 1;
-+
-+	return 0;
-+}
-+
-+static void omap3_evm_panel_disable_dvi(struct omap_display *display)
-+{
-+	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00,
-+			TWL4030_GPIODATA_IN3);
-+	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00,
-+			TWL4030_GPIODATA_DIR3);
-+	dvi_enabled = 0;
-+}
-+
-+
-+static struct omap_display_data omap3_evm_display_data_dvi = {
-+	.type = OMAP_DISPLAY_TYPE_DPI,
-+	.name = "dvi",
-+	.panel_name = "panel-generic",
-+	.u.dpi.data_lines = 24,
-+	.panel_enable = omap3_evm_panel_enable_dvi,
-+	.panel_disable = omap3_evm_panel_disable_dvi,
-+};
-+
-+static struct omap_dss_platform_data omap3_evm_dss_data = {
-+	.num_displays = 3,
-+	.displays = {
-+		&omap3_evm_display_data,
-+		&omap3_evm_display_data_dvi,
-+		&omap3_evm_display_data_tv,
-+	}
-+};
-+static struct platform_device omap3_evm_dss_device = {
-+	.name		= "omap-dss",
-+	.id		= -1,
-+	.dev            = {
-+		.platform_data = &omap3_evm_dss_data,
-+	},
- };
- 
- static void ads7846_dev_init(void)
-@@ -225,11 +414,10 @@ static void __init omap3_evm_init_irq(void)
- 
- static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
- 	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
--	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
- };
- 
- static struct platform_device *omap3_evm_devices[] __initdata = {
--	&omap3_evm_lcd_device,
-+	&omap3_evm_dss_device,
- 	&omap3evm_smc911x_device,
- };
- 
-@@ -260,6 +448,7 @@ static void __init omap3_evm_init(void)
- 	usb_ehci_init();
- 	omap3evm_flash_init();
- 	ads7846_dev_init();
-+	omap3_evm_display_init();
- }
- 
- static void __init omap3_evm_map_io(void)
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch b/recipes/linux/linux-omap-pm/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch
deleted file mode 100644
index 89174909a0..0000000000
--- a/recipes/linux/linux-omap-pm/0009-DSS-OMAPFB-allocate-fbmem-only-for-fb0-or-if-spes.patch
+++ /dev/null
@@ -1,121 +0,0 @@
-From bd4fd1dd3be7ff31a6cf779f0683d617280ac92e Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 16:44:17 +0200
-Subject: [PATCH] DSS: OMAPFB: allocate fbmem only for fb0, or if spesified in vram arg
-
----
- drivers/video/omap2/omapfb-main.c |   65 +++++++++++++++++++-----------------
- 1 files changed, 34 insertions(+), 31 deletions(-)
-
-diff --git a/drivers/video/omap2/omapfb-main.c b/drivers/video/omap2/omapfb-main.c
-index 76bd416..9dbff42 100644
---- a/drivers/video/omap2/omapfb-main.c
-+++ b/drivers/video/omap2/omapfb-main.c
-@@ -939,11 +939,12 @@ static int omapfb_alloc_fbmem_display(struct omapfb2_device *fbdev, int fbnum,
- 		break;
- 	}
- 
--	size = display->panel->timings.x_res * display->panel->timings.y_res *
--		bytespp;
--
--	if (def_vram > size)
-+	if (def_vram)
- 		size = def_vram;
-+	else
-+		size = display->panel->timings.x_res *
-+			display->panel->timings.y_res *
-+			bytespp;
- 
- 	return omapfb_alloc_fbmem(fbdev, fbnum, size);
- }
-@@ -956,13 +957,25 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
- 	memset(vrams, 0, sizeof(vrams));
- 
- 	if (def_vram) {
--		char *p = def_vram;
-+		char str[64];
-+		char *tok, *s;
-+
-+		if (strlen(def_vram) > sizeof(str) - 1) {
-+			dev_err(fbdev->dev, "Illegal vram parameters\n");
-+			return -EINVAL;
-+		}
-+
-+		strcpy(str, def_vram);
-+
-+		s = str;
- 		i = 0;
- 
--		while (true) {
-+		while ((tok = strsep(&s, ","))) {
- 			unsigned long size;
- 
--			size = memparse(p, &p);
-+			printk("param '%s'\n", tok);
-+
-+			size = memparse(tok, NULL);
- 
- 			if (size == 0) {
- 				dev_err(fbdev->dev, "illegal vram size\n");
-@@ -970,19 +983,18 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
- 			}
- 
- 			vrams[i++] = size;
--
--			if (*p != ',')
--				break;
--
--			p++;
- 		}
- 	}
- 
- 	for (i = 0; i < fbdev->num_fbs; i++) {
--		r = omapfb_alloc_fbmem_display(fbdev, i, vrams[i]);
-+		/* allocate memory automatically only for fb0, or if
-+		 * excplicitly defined with vram option */
-+		if (i == 0 || vrams[i] != 0) {
-+			r = omapfb_alloc_fbmem_display(fbdev, i, vrams[i]);
- 
--		if (r)
--			return r;
-+			if (r)
-+				return r;
-+		}
- 	}
- 
- 	for (i = 0; i < fbdev->num_fbs; i++) {
-@@ -1167,24 +1179,15 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
- 			dev_err(fbdev->dev, "failed to change mode\n");
- 	}
- 
--	/* Enable the first framebuffer that has overlay that is connected
--	 * to display. Usually this would be the GFX plane. */
--	r = 0;
--	for (i = 0; i < fbdev->num_fbs; i++) {
--		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
--		int t;
-+	/* Enable fb0 */
-+	if (fbdev->num_fbs > 0) {
-+		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
- 
--		for (t = 0; t < ofbi->num_overlays; t++) {
--			struct omap_overlay *ovl = ofbi->overlays[t];
--			if (ovl->manager && ovl->manager->display) {
--				ovl->enable(ovl, 1);
--				r = 1;
--				break;
--			}
--		}
-+		if (ofbi->num_overlays > 0 ) {
-+			struct omap_overlay *ovl = ofbi->overlays[0];
- 
--		if (r)
--			break;
-+			ovl->enable(ovl, 1);
-+		}
- 	}
- 
- 	DBG("create_framebuffers done\n");
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch b/recipes/linux/linux-omap-pm/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch
deleted file mode 100644
index c5ce980772..0000000000
--- a/recipes/linux/linux-omap-pm/0010-DSS-OMAPFB-remove-extra-omapfb_setup_overlay-call.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 70c3edb223f7bfbc6c5b095826c779b7dd853f10 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 17:00:46 +0200
-Subject: [PATCH] OMAPFB: remove extra omapfb_setup_overlay call
-
-It kinda messed things up...
----
- drivers/video/omap2/omapfb-ioctl.c |    5 -----
- 1 files changed, 0 insertions(+), 5 deletions(-)
-
-diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c
-index 1f0f044..bb5f791 100644
---- a/drivers/video/omap2/omapfb-ioctl.c
-+++ b/drivers/video/omap2/omapfb-ioctl.c
-@@ -67,11 +67,6 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
- 			goto out;
- 	}
- 
--	r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
--			pi->out_width, pi->out_height);
--	if (r)
--		goto out;
--
- 	ovl->enable(ovl, pi->enabled);
- 
- 	if (ovl->manager)
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch b/recipes/linux/linux-omap-pm/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch
deleted file mode 100644
index 8d4165ac7a..0000000000
--- a/recipes/linux/linux-omap-pm/0011-DSS-OMAPFB-fix-GFX_SYNC-to-be-compatible-with-DSS1.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 36d6e7edd70d16ad57ed745a1c48694805035dc7 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 17:17:08 +0200
-Subject: [PATCH] OMAPFB: fix GFX_SYNC to be compatible with DSS1
-
-DSS1 never returned an error from GFX_SYNC ioctl. So we neither.
----
- drivers/video/omap2/omapfb-ioctl.c |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/video/omap2/omapfb-ioctl.c b/drivers/video/omap2/omapfb-ioctl.c
-index bb5f791..0cb0370 100644
---- a/drivers/video/omap2/omapfb-ioctl.c
-+++ b/drivers/video/omap2/omapfb-ioctl.c
-@@ -314,7 +314,8 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
- 	switch (cmd) {
- 	case OMAPFB_SYNC_GFX:
- 		if (!display || !display->sync) {
--			r = -EINVAL;
-+			/* DSS1 never returns an error here, so we neither */
-+			/*r = -EINVAL;*/
- 			break;
- 		}
- 
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch b/recipes/linux/linux-omap-pm/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch
deleted file mode 100644
index 85e7952c8d..0000000000
--- a/recipes/linux/linux-omap-pm/0012-DSS-Add-comments-to-FAKE_VSYNC-to-make-things-more.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 942267b679b7f60b33e034ee29e313925cfbcae0 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 17:20:24 +0200
-Subject: [PATCH] DSS: Add comments to FAKE_VSYNC to make things more clear
-
----
- arch/arm/plat-omap/dss/Kconfig |    4 +++-
- 1 files changed, 3 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/plat-omap/dss/Kconfig b/arch/arm/plat-omap/dss/Kconfig
-index 6b342df..f0b1f1c 100644
---- a/arch/arm/plat-omap/dss/Kconfig
-+++ b/arch/arm/plat-omap/dss/Kconfig
-@@ -46,7 +46,9 @@ config OMAP2_DSS_FAKE_VSYNC
- 	default n
- 	help
- 	  If this is selected, DSI will fake a DISPC VSYNC interrupt
--	  when DSI has sent a frame.
-+	  when DSI has sent a frame. This is only needed with DSI or
-+	  RFBI displays using manual mode, and you want VSYNC to time,
-+	  for example, animation.
- 
- config OMAP2_DSS_MIN_FCK_PER_PCK
- 	int "Minimum FCK/PCK ratio (for scaling)"
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0013-DSS-OMAPFB-remove-extra-spaces.patch b/recipes/linux/linux-omap-pm/0013-DSS-OMAPFB-remove-extra-spaces.patch
deleted file mode 100644
index fac269a319..0000000000
--- a/recipes/linux/linux-omap-pm/0013-DSS-OMAPFB-remove-extra-spaces.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 17f3d30a218efba9bf947a667c9c1fa2f4286794 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 17:40:59 +0200
-Subject: [PATCH] OMAPFB: remove extra spaces
-
----
- drivers/video/omap2/omapfb-sysfs.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/video/omap2/omapfb-sysfs.c b/drivers/video/omap2/omapfb-sysfs.c
-index 4383e44..0e153b9 100644
---- a/drivers/video/omap2/omapfb-sysfs.c
-+++ b/drivers/video/omap2/omapfb-sysfs.c
-@@ -337,7 +337,7 @@ static ssize_t show_overlays(struct device *dev, struct device_attribute *attr,
- 				break;
- 
- 		l += snprintf(buf + l, size - l,
--			"%s t:%s x:%d y:%d iw:%d ih:%d w: %d h: %d e:%d\n",
-+			"%s t:%s x:%d y:%d iw:%d ih:%d w:%d h:%d e:%d\n",
- 			ovl->name,
- 			mgr ? mgr->name : "none",
- 			ovl->info.pos_x,
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/0014-DSS-fix-clk_get_usecount.patch b/recipes/linux/linux-omap-pm/0014-DSS-fix-clk_get_usecount.patch
deleted file mode 100644
index a935709a9e..0000000000
--- a/recipes/linux/linux-omap-pm/0014-DSS-fix-clk_get_usecount.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From ba234fff55f8a1ef96b57ce2e18ab90df76f2c82 Mon Sep 17 00:00:00 2001
-From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Thu, 8 Jan 2009 12:01:39 +0200
-Subject: [PATCH] DSS: fix clk_get_usecount
-
----
- arch/arm/plat-omap/dss/dss.c |   12 ++++++------
- 1 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/arm/plat-omap/dss/dss.c b/arch/arm/plat-omap/dss/dss.c
-index 4a403c1..b9f35d8 100644
---- a/arch/arm/plat-omap/dss/dss.c
-+++ b/arch/arm/plat-omap/dss/dss.c
-@@ -236,7 +236,7 @@ ssize_t dss_print_clocks(char *buf, ssize_t size)
- 		l += snprintf(buf + l, size - l, "%-15s\t%lu\t%d\n",
- 				clocks[i]->name,
- 				clk_get_rate(clocks[i]),
--				clk_get_usecount(clocks[i]));
-+				clocks[i]->usecount);
- 	}
- 
- 	return l;
-@@ -590,28 +590,28 @@ void dss_exit(void)
- 	free_irq(INT_24XX_DSS_IRQ, NULL);
- 
- 	/* these should be removed at some point */
--	c = clk_get_usecount(dss.dss_ick);
-+	c = dss.dss_ick->usecount;
- 	if (c > 0) {
- 		DSSERR("warning: dss_ick usecount %d, disabling\n", c);
- 		while (c-- > 0)
- 			clk_disable(dss.dss_ick);
- 	}
- 
--	c = clk_get_usecount(dss.dss1_fck);
-+	c = dss.dss1_fck->usecount;
- 	if (c > 0) {
- 		DSSERR("warning: dss1_fck usecount %d, disabling\n", c);
- 		while (c-- > 0)
- 			clk_disable(dss.dss1_fck);
- 	}
- 
--	c = clk_get_usecount(dss.dss2_fck);
-+	c = dss.dss2_fck->usecount;
- 	if (c > 0) {
- 		DSSERR("warning: dss2_fck usecount %d, disabling\n", c);
- 		while (c-- > 0)
- 			clk_disable(dss.dss2_fck);
- 	}
- 
--	c = clk_get_usecount(dss.dss_54m_fck);
-+	c = dss.dss_54m_fck->usecount;
- 	if (c > 0) {
- 		DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c);
- 		while (c-- > 0)
-@@ -619,7 +619,7 @@ void dss_exit(void)
- 	}
- 
- 	if (dss.dss_96m_fck) {
--		c = clk_get_usecount(dss.dss_96m_fck);
-+		c = dss.dss_96m_fck->usecount;
- 		if (c > 0) {
- 			DSSERR("warning: dss_96m_fck usecount %d, disabling\n",
- 					c);
--- 
-1.5.6.3
-
diff --git a/recipes/linux/linux-omap-pm/add-cpufreq-for-omap3evm.diff b/recipes/linux/linux-omap-pm/add-cpufreq-for-omap3evm.diff
deleted file mode 100644
index e9986cf36a..0000000000
--- a/recipes/linux/linux-omap-pm/add-cpufreq-for-omap3evm.diff
+++ /dev/null
@@ -1,28 +0,0 @@
---- /tmp/board-omap3evm.c	2009-02-27 17:02:00.000000000 +0100
-+++ git/arch/arm/mach-omap2/board-omap3evm.c	2009-02-27 17:21:10.000000000 +0100
-@@ -37,11 +37,14 @@
- #include <mach/common.h>
- #include <mach/mcspi.h>
- #include <mach/display.h>
-+#include <mach/omap-pm.h>
-+#include <mach/clock.h>
- 
- #include "sdram-micron-mt46h32m32lf-6.h"
- #include "twl4030-generic-scripts.h"
- #include "mmc-twl4030.h"
--
-+#include "pm.h"
-+#include "omap3-opp.h"
- 
- static struct resource omap3evm_smc911x_resources[] = {
- 	[0] =	{
-@@ -406,7 +409,8 @@
- 
- static void __init omap3_evm_init_irq(void)
- {
--	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL, NULL, NULL);
-+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table,
-+	                     omap3_dsp_rate_table, omap3_l3_rate_table);
- 	omap_init_irq();
- 	omap_gpio_init();
- 	omap3evm_init_smc911x();
diff --git a/recipes/linux/linux-omap-pm/beagleboard/ehci.patch b/recipes/linux/linux-omap-pm/beagleboard/ehci.patch
new file mode 100644
index 0000000000..5a8c84471b
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/beagleboard/ehci.patch
@@ -0,0 +1,131 @@
+Index: git/arch/arm/mach-omap2/board-omap3beagle.c
+===================================================================
+--- git.orig/arch/arm/mach-omap2/board-omap3beagle.c
++++ git/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -154,6 +154,7 @@ static int beagle_twl_gpio_setup(struct
+ 	 * power switch and overcurrent detect
+ 	 */
+ 
++#if 0 /* TODO: This needs to be modified to not rely on u-boot */
+ 	gpio_request(gpio + 1, "EHCI_nOC");
+ 	gpio_direction_input(gpio + 1);
+ 
+@@ -163,7 +164,7 @@ static int beagle_twl_gpio_setup(struct
+ 
+ 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+-
++#endif
+ 	return 0;
+ }
+ 
+Index: git/arch/arm/mach-omap2/usb-ehci.c
+===================================================================
+--- git.orig/arch/arm/mach-omap2/usb-ehci.c
++++ git/arch/arm/mach-omap2/usb-ehci.c
+@@ -147,9 +147,11 @@ static void setup_ehci_io_mux(void)
+ 
+ void __init usb_ehci_init(void)
+ {
++#if 0 /* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */
+ 	/* Setup Pin IO MUX for EHCI */
+ 	if (cpu_is_omap34xx())
+ 		setup_ehci_io_mux();
++#endif
+ 
+ 	if (platform_device_register(&ehci_device) < 0) {
+ 		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+Index: git/drivers/usb/host/ehci-omap.c
+===================================================================
+--- git.orig/drivers/usb/host/ehci-omap.c
++++ git/drivers/usb/host/ehci-omap.c
+@@ -48,16 +48,25 @@
+  *		to get the PHY state machine in working state
+  */
+ #define EXTERNAL_PHY_RESET
++#ifdef CONFIG_MACH_OMAP3_BEAGLE
++#define        EXT_PHY_RESET_GPIO_PORT2        (147)
++#else
+ #define	EXT_PHY_RESET_GPIO_PORT1	(57)
+ #define	EXT_PHY_RESET_GPIO_PORT2	(61)
++#endif
+ #define	EXT_PHY_RESET_DELAY		(10)
+ 
++#define PHY_STP_PULLUP_ENABLE           (0x10)
++#define PHY_STP_PULLUP_DISABLE          (0x90)
++
+ /* ISSUE2:
+  * USBHOST supports External charge pump PHYs only
+  * Use the VBUS from Port1 to power VBUS of Port2 externally
+  * So use Port2 as the working ULPI port
+  */
++#ifndef CONFIG_MACH_OMAP3_BEAGLE
+ #define VBUS_INTERNAL_CHARGEPUMP_HACK
++#endif
+ 
+ #endif /* CONFIG_OMAP_EHCI_PHY_MODE */
+ 
+@@ -225,14 +234,43 @@ static int omap_start_ehc(struct platfor
+ 
+ #ifdef EXTERNAL_PHY_RESET
+ 	/* Refer: ISSUE1 */
++#ifndef CONFIG_MACH_OMAP3_BEAGLE
+ 	gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset");
+ 	gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0);
++#endif
+ 	gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset");
+ 	gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0);
++	gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0);
+ 	/* Hold the PHY in RESET for enough time till DIR is high */
+ 	udelay(EXT_PHY_RESET_DELAY);
+ #endif
+ 
++        /*
++         * The PHY register 0x7 - Interface Control register is
++         * configured to disable the integrated STP pull-up resistor
++         * used for interface protection.
++        *
++        * May not need to be here.
++         */
++        omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */
++                (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/*   Write */
++                (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */
++                (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */
++                (PHY_STP_PULLUP_DISABLE),
++                EHCI_INSNREG05_ULPI);
++
++        while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)));
++
++        /* Force PHY to HS */
++        omap_writel((0x4 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* function ctrl */
++                (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/*   Write */
++                (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */
++                (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */
++                (0x40),
++                EHCI_INSNREG05_ULPI);
++
++        while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)));
++
+ 	/* Configure TLL for 60Mhz clk for ULPI */
+ 	ehci_clocks->usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK);
+ 	if (IS_ERR(ehci_clocks->usbtll_fck_clk))
+@@ -307,7 +345,9 @@ static int omap_start_ehc(struct platfor
+ 	 * Hold the PHY in RESET for enough time till PHY is settled and ready
+ 	 */
+ 	udelay(EXT_PHY_RESET_DELAY);
++#ifndef CONFIG_MACH_OMAP3_BEAGLE
+ 	gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1);
++#endif
+ 	gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1);
+ #endif
+ 
+@@ -393,7 +433,9 @@ static void omap_stop_ehc(struct platfor
+ 
+ 
+ #ifdef EXTERNAL_PHY_RESET
++#ifndef CONFIG_MACH_OMAP3_BEAGLE
+ 	gpio_free(EXT_PHY_RESET_GPIO_PORT1);
++#endif
+ 	gpio_free(EXT_PHY_RESET_GPIO_PORT2);
+ #endif
+ 
diff --git a/recipes/linux/linux-omap-pm/cache-display-fix.patch b/recipes/linux/linux-omap-pm/cache-display-fix.patch
deleted file mode 100644
index 019fd5acf1..0000000000
--- a/recipes/linux/linux-omap-pm/cache-display-fix.patch
+++ /dev/null
@@ -1,238 +0,0 @@
-On Tue, 2008-07-01 at 06:23 +0100, Dirk Behme wrote:
-> Catalin Marinas wrote:
-> > But, anyway, if you want a patch, Harry is updating it to a recent
-> > kernel.
-> 
-> Any news on this? I think there are some people wanting a patch ;)
-
-See below for a preliminary patch updated to 2.6.26-rc8. Note that I
-don't plan to submit it in its current form but clean it up a bit first.
-
-
-Show the cache type of ARMv7 CPUs
-
-From: Catalin Marinas <catalin.marinas@arm.com>
-
-Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
----
-
- arch/arm/kernel/setup.c  |  137 +++++++++++++++++++++++++++++++++++++++++++++-
- include/asm-arm/system.h |   18 ++++++
- 2 files changed, 153 insertions(+), 2 deletions(-)
-
-
-diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
-index 5ae0eb2..0cd238d 100644
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -256,6 +256,24 @@ static const char *proc_arch[] = {
- 	"?(17)",
- };
- 
-+static const char *v7_cache_policy[4] = {
-+	"reserved",
-+	"AVIVT",
-+	"VIPT",
-+	"PIPT",
-+};
-+
-+static const char *v7_cache_type[8] = {
-+	"none",
-+	"instruction only",
-+	"data only",
-+	"separate instruction and data",
-+	"unified",
-+	"unknown type",
-+	"unknown type",
-+	"unknown type",
-+};
-+
- #define CACHE_TYPE(x)	(((x) >> 25) & 15)
- #define CACHE_S(x)	((x) & (1 << 24))
- #define CACHE_DSIZE(x)	(((x) >> 12) & 4095)	/* only if S=1 */
-@@ -266,6 +284,22 @@ static const char *proc_arch[] = {
- #define CACHE_M(y)	((y) & (1 << 2))
- #define CACHE_LINE(y)	((y) & 3)
- 
-+#define CACHE_TYPE_V7(x)	(((x) >> 14) & 3)
-+#define CACHE_UNIFIED(x)	((((x) >> 27) & 7)+1)
-+#define CACHE_COHERENT(x)	((((x) >> 24) & 7)+1)
-+
-+#define CACHE_ID_LEVEL_MASK	7
-+#define CACHE_ID_LEVEL_BITS	3
-+
-+#define CACHE_LINE_V7(v)	((1 << (((v) & 7)+4)))
-+#define CACHE_ASSOC_V7(v)	((((v) >> 3) & ((1<<10)-1))+1)
-+#define CACHE_SETS_V7(v)	((((v) >> 13) & ((1<<15)-1))+1)
-+#define CACHE_SIZE_V7(v)	(CACHE_LINE_V7(v)*CACHE_ASSOC_V7(v)*CACHE_SETS_V7(v))
-+#define CACHE_WA_V7(v)		(((v) & (1<<28)) != 0)
-+#define CACHE_RA_V7(v)		(((v) & (1<<29)) != 0)
-+#define CACHE_WB_V7(v)		(((v) & (1<<30)) != 0)
-+#define CACHE_WT_V7(v)		(((v) & (1<<31)) != 0)
-+
- static inline void dump_cache(const char *prefix, int cpu, unsigned int cache)
- {
- 	unsigned int mult = 2 + (CACHE_M(cache) ? 1 : 0);
-@@ -279,11 +313,57 @@ static inline void dump_cache(const char *prefix, int cpu, unsigned int cache)
- 			CACHE_LINE(cache)));
- }
- 
-+static void dump_v7_cache(const char *type, int cpu, unsigned int level)
-+{
-+	unsigned int cachesize;
-+                    
-+	write_extended_cpuid(2,0,0,0,level);  /* Set the cache size selection register */
-+	write_extended_cpuid(0,7,5,4,0);      /* Prefetch flush to wait for above */
-+	cachesize = read_extended_cpuid(1,0,0,0);
-+
-+	printk("CPU%u: %s cache: %d bytes, associativity %d, %d byte lines, %d sets,\n      supports%s%s%s%s\n",
-+	       cpu, type,
-+	       CACHE_SIZE_V7(cachesize),CACHE_ASSOC_V7(cachesize),
-+	       CACHE_LINE_V7(cachesize),CACHE_SETS_V7(cachesize),
-+	       CACHE_WA_V7(cachesize) ? " WA" : "",
-+	       CACHE_RA_V7(cachesize) ? " RA" : "",
-+	       CACHE_WB_V7(cachesize) ? " WB" : "",
-+	       CACHE_WT_V7(cachesize) ? " WT" : "");
-+}
-+
- static void __init dump_cpu_info(int cpu)
- {
- 	unsigned int info = read_cpuid(CPUID_CACHETYPE);
- 
--	if (info != processor_id) {
-+	if (info != processor_id && (info & (1 << 31))) {
-+		/* ARMv7 style of cache info register */
-+		unsigned int id = read_extended_cpuid(1,0,0,1);
-+		unsigned int level = 0;
-+		printk("CPU%u: L1 I %s cache. Caches unified at level %u, coherent at level %u\n",
-+		       cpu,
-+		       v7_cache_policy[CACHE_TYPE_V7(info)],
-+		       CACHE_UNIFIED(id),
-+		       CACHE_COHERENT(id));
-+
-+		while (id & CACHE_ID_LEVEL_MASK) {
-+			printk("CPU%u: Level %u cache is %s\n",
-+			       cpu, (level >> 1)+1, v7_cache_type[id & CACHE_ID_LEVEL_MASK]);
-+
-+			if (id & 1) {
-+				/* Dump I at this level */
-+				dump_v7_cache("I", cpu, level | 1);
-+			}
-+
-+			if (id & (4 | 2)) {
-+				/* Dump D or unified at this level */
-+				dump_v7_cache((id & 4) ? "unified" : "D", cpu, level);
-+			}
-+
-+			/* Next level out */
-+			level += 2;
-+			id >>= CACHE_ID_LEVEL_BITS;
-+		}
-+	} else if (info != processor_id) {
- 		printk("CPU%u: D %s %s cache\n", cpu, cache_is_vivt() ? "VIVT" : "VIPT",
- 		       cache_types[CACHE_TYPE(info)]);
- 		if (CACHE_S(info)) {
-@@ -916,6 +996,30 @@ c_show_cache(struct seq_file *m, const char *type, unsigned int cache)
- 			    CACHE_LINE(cache)));
- }
- 
-+static void c_show_v7_cache(struct seq_file *m, const char *type, unsigned int levelselect)
-+{
-+	unsigned int cachesize;
-+	unsigned int level = (levelselect >> 1) + 1;
-+                    
-+	write_extended_cpuid(2,0,0,0,levelselect);  /* Set the cache size selection register */
-+	write_extended_cpuid(0,7,5,4,0);      /* Prefetch flush to wait for above */
-+	cachesize = read_extended_cpuid(1,0,0,0);
-+
-+	seq_printf(m, "L%u %s size\t\t: %d bytes\n"
-+		   "L%u %s assoc\t\t: %d\n"
-+		   "L%u %s line length\t: %d\n"
-+		   "L%u %s sets\t\t: %d\n"
-+		   "L%u %s supports\t\t:%s%s%s%s\n",
-+		   level, type, CACHE_SIZE_V7(cachesize),
-+		   level, type, CACHE_ASSOC_V7(cachesize),
-+		   level, type, CACHE_LINE_V7(cachesize),
-+		   level, type, CACHE_SETS_V7(cachesize),
-+		   level, type, CACHE_WA_V7(cachesize) ? " WA" : "",
-+		   CACHE_RA_V7(cachesize) ? " RA" : "",
-+		   CACHE_WB_V7(cachesize) ? " WB" : "",
-+		   CACHE_WT_V7(cachesize) ? " WT" : "");
-+}
-+
- static int c_show(struct seq_file *m, void *v)
- {
- 	int i;
-@@ -971,7 +1075,36 @@ static int c_show(struct seq_file *m, void *v)
- 
- 	{
- 		unsigned int cache_info = read_cpuid(CPUID_CACHETYPE);
--		if (cache_info != processor_id) {
-+		if (cache_info != processor_id && (cache_info & (1<<31))) {
-+			/* V7 style of cache info register */
-+			unsigned int id = read_extended_cpuid(1,0,0,1);
-+			unsigned int levelselect = 0;
-+			seq_printf(m, "L1 I cache\t:%s\n"
-+				   "Cache unification level\t: %u\n"
-+				   "Cache coherency level\t: %u\n",
-+				   v7_cache_policy[CACHE_TYPE_V7(cache_info)],
-+				   CACHE_UNIFIED(id),
-+				   CACHE_COHERENT(id));
-+
-+			while (id & CACHE_ID_LEVEL_MASK) {
-+				seq_printf(m, "Level %u cache\t\t: %s\n",
-+					   (levelselect >> 1)+1, v7_cache_type[id & CACHE_ID_LEVEL_MASK]);
-+
-+				if (id & 1) {
-+					/* Dump I at this level */
-+					c_show_v7_cache(m, "I", levelselect | 1);
-+				}
-+
-+				if (id & (4 | 2)) {
-+					/* Dump D or unified at this level */
-+					c_show_v7_cache(m, (id & 4) ? "cache" : "D", levelselect);
-+				}
-+
-+				/* Next level out */
-+				levelselect += 2;
-+				id >>= CACHE_ID_LEVEL_BITS;
-+			}
-+		} else if (cache_info != processor_id) {
- 			seq_printf(m, "Cache type\t: %s\n"
- 				      "Cache clean\t: %s\n"
- 				      "Cache lockdown\t: %s\n"
-diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
-index 514af79..704738e 100644
---- a/arch/arm/include/asm/system.h
-+++ b/arch/arm/include/asm/system.h
-@@ -74,6 +74,24 @@
- 		    : "cc");						\
- 		__val;							\
- 	})
-+#define read_extended_cpuid(op1,op2,op3,op4)		\
-+	({								\
-+		unsigned int __val;					\
-+		asm("mrc p15," __stringify(op1) ",%0,c" __stringify(op2)",c" __stringify(op3)"," __stringify(op4)	\
-+		    : "=r" (__val)					\
-+		    :							\
-+		    : "cc");						\
-+		__val;							\
-+	})
-+
-+#define write_extended_cpuid(op1,op2,op3,op4,v)		\
-+	({								\
-+		unsigned int __val = v;					\
-+		asm("mcr p15," __stringify(op1) ",%0,c" __stringify(op2)",c" __stringify(op3)"," __stringify(op4)	\
-+		    :							\
-+		    : "r" (__val)					\
-+		    : "cc");						\
-+	})
- #else
- extern unsigned int processor_id;
- #define read_cpuid(reg) (processor_id)
-
-
--- 
-Catalin
-
-
diff --git a/recipes/linux/linux-omap-pm/dss2.diff b/recipes/linux/linux-omap-pm/dss2.diff
deleted file mode 100644
index 8d3d2fdca6..0000000000
--- a/recipes/linux/linux-omap-pm/dss2.diff
+++ /dev/null
@@ -1,9 +0,0 @@
---- /tmp/Makefile	2009-01-12 15:50:04.000000000 +0100
-+++ git/arch/arm/plat-omap/Makefile	2009-01-12 15:50:25.000000000 +0100
-@@ -32,3 +32,6 @@
- obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
- obj-$(CONFIG_OMAP_PM_SRF) += omap-pm-srf.o \
- 				resource.o
-+
-+# OMAP2/3 Display Subsystem
-+obj-y += dss/
diff --git a/recipes/linux/linux-omap-pm/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch b/recipes/linux/linux-omap-pm/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch
new file mode 100644
index 0000000000..aeab62f105
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0001-Revert-gro-Fix-legacy-path-napi_complete-crash.patch
@@ -0,0 +1,39 @@
+From 26abf45ac80be4c54a63fecf1c3c1e1efb416e0a Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 1 Apr 2009 18:27:09 +0300
+Subject: [PATCH] Revert "gro: Fix legacy path napi_complete crash"
+
+This reverts commit 303c6a0251852ecbdc5c15e466dcaff5971f7517.
+
+Fixes USB network problems
+---
+ net/core/dev.c |    5 ++---
+ 1 files changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/net/core/dev.c b/net/core/dev.c
+index e3fe5c7..c1e9dc0 100644
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -2588,9 +2588,9 @@ static int process_backlog(struct napi_struct *napi, int quota)
+ 		local_irq_disable();
+ 		skb = __skb_dequeue(&queue->input_pkt_queue);
+ 		if (!skb) {
++			__napi_complete(napi);
+ 			local_irq_enable();
+-			napi_complete(napi);
+-			goto out;
++			break;
+ 		}
+ 		local_irq_enable();
+ 
+@@ -2599,7 +2599,6 @@ static int process_backlog(struct napi_struct *napi, int quota)
+ 
+ 	napi_gro_flush(napi);
+ 
+-out:
+ 	return work;
+ }
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch b/recipes/linux/linux-omap-pm/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch
new file mode 100644
index 0000000000..5873ae280c
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0002-OMAPFB-move-omapfb.h-to-include-linux.patch
@@ -0,0 +1,1297 @@
+From 02243f13eec816e11d16676a131bc04b8a0666ab Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 11 Feb 2009 16:33:02 +0200
+Subject: [PATCH] OMAPFB: move omapfb.h to include/linux/
+
+This is needed so that omapfb.h is automatically exported to user space.
+
+omapfb.h should be cleaned up later. Some stuff can probably be moved
+to omapfb's private include file.
+
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+---
+ arch/arm/mach-omap1/board-nokia770.c     |    2 +-
+ arch/arm/mach-omap2/board-n800.c         |    2 +-
+ arch/arm/mach-omap2/io.c                 |    2 +-
+ arch/arm/plat-omap/fb.c                  |    2 +-
+ arch/arm/plat-omap/include/mach/omapfb.h |  398 ------------------------------
+ drivers/video/omap/blizzard.c            |    2 +-
+ drivers/video/omap/dispc.c               |    2 +-
+ drivers/video/omap/hwa742.c              |    2 +-
+ drivers/video/omap/lcd_2430sdp.c         |    2 +-
+ drivers/video/omap/lcd_ams_delta.c       |    2 +-
+ drivers/video/omap/lcd_apollon.c         |    2 +-
+ drivers/video/omap/lcd_h3.c              |    2 +-
+ drivers/video/omap/lcd_h4.c              |    3 +-
+ drivers/video/omap/lcd_inn1510.c         |    2 +-
+ drivers/video/omap/lcd_inn1610.c         |    2 +-
+ drivers/video/omap/lcd_ldp.c             |    2 +-
+ drivers/video/omap/lcd_mipid.c           |    2 +-
+ drivers/video/omap/lcd_omap2evm.c        |    2 +-
+ drivers/video/omap/lcd_omap3beagle.c     |    2 +-
+ drivers/video/omap/lcd_omap3evm.c        |    2 +-
+ drivers/video/omap/lcd_osk.c             |    2 +-
+ drivers/video/omap/lcd_overo.c           |    2 +-
+ drivers/video/omap/lcd_p2.c              |    2 +-
+ drivers/video/omap/lcd_palmte.c          |    2 +-
+ drivers/video/omap/lcd_palmtt.c          |    2 +-
+ drivers/video/omap/lcd_palmz71.c         |    3 +-
+ drivers/video/omap/lcdc.c                |    2 +-
+ drivers/video/omap/omapfb_main.c         |    2 +-
+ drivers/video/omap/rfbi.c                |    3 +-
+ drivers/video/omap/sossi.c               |    2 +-
+ include/linux/omapfb.h                   |  398 ++++++++++++++++++++++++++++++
+ 31 files changed, 427 insertions(+), 430 deletions(-)
+ delete mode 100644 arch/arm/plat-omap/include/mach/omapfb.h
+ create mode 100644 include/linux/omapfb.h
+
+diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
+index 8780ca6..ca4680a 100644
+--- a/arch/arm/mach-omap1/board-nokia770.c
++++ b/arch/arm/mach-omap1/board-nokia770.c
+@@ -18,6 +18,7 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/ads7846.h>
+ #include <linux/workqueue.h>
++#include <linux/omapfb.h>
+ #include <linux/delay.h>
+ 
+ #include <mach/hardware.h>
+@@ -32,7 +33,6 @@
+ #include <mach/keypad.h>
+ #include <mach/common.h>
+ #include <mach/dsp_common.h>
+-#include <mach/omapfb.h>
+ #include <mach/lcd_mipid.h>
+ #include <mach/mmc.h>
+ #include <mach/usb.h>
+diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
+index cb32b61..f6f6571 100644
+--- a/arch/arm/mach-omap2/board-n800.c
++++ b/arch/arm/mach-omap2/board-n800.c
+@@ -27,6 +27,7 @@
+ #include <linux/i2c/lm8323.h>
+ #include <linux/i2c/menelaus.h>
+ #include <linux/i2c/lp5521.h>
++#include <linux/omapfb.h>
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+ #include <asm/mach/arch.h>
+@@ -39,7 +40,6 @@
+ #include <mach/lcd_mipid.h>
+ #include <mach/clock.h>
+ #include <mach/gpio-switch.h>
+-#include <mach/omapfb.h>
+ #include <mach/blizzard.h>
+ 
+ #include <../drivers/cbus/tahvo.h>
+diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
+index 3746222..40615a6 100644
+--- a/arch/arm/plat-omap/fb.c
++++ b/arch/arm/plat-omap/fb.c
+@@ -28,13 +28,13 @@
+ #include <linux/platform_device.h>
+ #include <linux/bootmem.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/hardware.h>
+ #include <asm/mach/map.h>
+ 
+ #include <mach/board.h>
+ #include <mach/sram.h>
+-#include <mach/omapfb.h>
+ 
+ #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+ 
+diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
+deleted file mode 100644
+index b226bdf..0000000
+--- a/arch/arm/plat-omap/include/mach/omapfb.h
++++ /dev/null
+@@ -1,398 +0,0 @@
+-/*
+- * File: arch/arm/plat-omap/include/mach/omapfb.h
+- *
+- * Framebuffer driver for TI OMAP boards
+- *
+- * Copyright (C) 2004 Nokia Corporation
+- * Author: Imre Deak <imre.deak@nokia.com>
+- *
+- * This program is free software; you can redistribute it and/or modify it
+- * under the terms of the GNU General Public License as published by the
+- * Free Software Foundation; either version 2 of the License, or (at your
+- * option) any later version.
+- *
+- * This program is distributed in the hope that it will be useful, but
+- * WITHOUT ANY WARRANTY; without even the implied warranty of
+- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+- * General Public License for more details.
+- *
+- * You should have received a copy of the GNU General Public License along
+- * with this program; if not, write to the Free Software Foundation, Inc.,
+- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+- */
+-
+-#ifndef __OMAPFB_H
+-#define __OMAPFB_H
+-
+-#include <asm/ioctl.h>
+-#include <asm/types.h>
+-
+-/* IOCTL commands. */
+-
+-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+-#define OMAP_IO(num)		_IO('O', num)
+-
+-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+-#define OMAPFB_VSYNC		OMAP_IO(38)
+-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+-
+-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+-
+-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+-#define OMAPFB_CAPS_TEARSYNC		0x00002000
+-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
+-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+-
+-/* Values from DSP must map to lower 16-bits */
+-#define OMAPFB_FORMAT_MASK		0x00ff
+-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+-
+-#define OMAPFB_EVENT_READY	1
+-#define OMAPFB_EVENT_DISABLED	2
+-
+-#define OMAPFB_MEMTYPE_SDRAM		0
+-#define OMAPFB_MEMTYPE_SRAM		1
+-#define OMAPFB_MEMTYPE_MAX		1
+-
+-enum omapfb_color_format {
+-	OMAPFB_COLOR_RGB565 = 0,
+-	OMAPFB_COLOR_YUV422,
+-	OMAPFB_COLOR_YUV420,
+-	OMAPFB_COLOR_CLUT_8BPP,
+-	OMAPFB_COLOR_CLUT_4BPP,
+-	OMAPFB_COLOR_CLUT_2BPP,
+-	OMAPFB_COLOR_CLUT_1BPP,
+-	OMAPFB_COLOR_RGB444,
+-	OMAPFB_COLOR_YUY422,
+-};
+-
+-struct omapfb_update_window {
+-	__u32 x, y;
+-	__u32 width, height;
+-	__u32 format;
+-	__u32 out_x, out_y;
+-	__u32 out_width, out_height;
+-	__u32 reserved[8];
+-};
+-
+-struct omapfb_update_window_old {
+-	__u32 x, y;
+-	__u32 width, height;
+-	__u32 format;
+-};
+-
+-enum omapfb_plane {
+-	OMAPFB_PLANE_GFX = 0,
+-	OMAPFB_PLANE_VID1,
+-	OMAPFB_PLANE_VID2,
+-};
+-
+-enum omapfb_channel_out {
+-	OMAPFB_CHANNEL_OUT_LCD = 0,
+-	OMAPFB_CHANNEL_OUT_DIGIT,
+-};
+-
+-struct omapfb_plane_info {
+-	__u32 pos_x;
+-	__u32 pos_y;
+-	__u8  enabled;
+-	__u8  channel_out;
+-	__u8  mirror;
+-	__u8  reserved1;
+-	__u32 out_width;
+-	__u32 out_height;
+-	__u32 reserved2[12];
+-};
+-
+-struct omapfb_mem_info {
+-	__u32 size;
+-	__u8  type;
+-	__u8  reserved[3];
+-};
+-
+-struct omapfb_caps {
+-	__u32 ctrl;
+-	__u32 plane_color;
+-	__u32 wnd_color;
+-};
+-
+-enum omapfb_color_key_type {
+-	OMAPFB_COLOR_KEY_DISABLED = 0,
+-	OMAPFB_COLOR_KEY_GFX_DST,
+-	OMAPFB_COLOR_KEY_VID_SRC,
+-};
+-
+-struct omapfb_color_key {
+-	__u8  channel_out;
+-	__u32 background;
+-	__u32 trans_key;
+-	__u8  key_type;
+-};
+-
+-enum omapfb_update_mode {
+-	OMAPFB_UPDATE_DISABLED = 0,
+-	OMAPFB_AUTO_UPDATE,
+-	OMAPFB_MANUAL_UPDATE
+-};
+-
+-#ifdef __KERNEL__
+-
+-#include <linux/completion.h>
+-#include <linux/interrupt.h>
+-#include <linux/fb.h>
+-#include <linux/mutex.h>
+-
+-#include <mach/board.h>
+-
+-#define OMAP_LCDC_INV_VSYNC             0x0001
+-#define OMAP_LCDC_INV_HSYNC             0x0002
+-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+-
+-#define OMAP_LCDC_SIGNAL_MASK		0x003f
+-
+-#define OMAP_LCDC_PANEL_TFT		0x0100
+-
+-#define OMAPFB_PLANE_XRES_MIN		8
+-#define OMAPFB_PLANE_YRES_MIN		8
+-
+-#ifdef CONFIG_ARCH_OMAP1
+-#define OMAPFB_PLANE_NUM		1
+-#else
+-#define OMAPFB_PLANE_NUM		3
+-#endif
+-
+-struct omapfb_device;
+-
+-struct lcd_panel {
+-	const char	*name;
+-	int		config;		/* TFT/STN, signal inversion */
+-	int		bpp;		/* Pixel format in fb mem */
+-	int		data_lines;	/* Lines on LCD HW interface */
+-
+-	int		x_res, y_res;
+-	int		pixel_clock;	/* In kHz */
+-	int		hsw;		/* Horizontal synchronization
+-					   pulse width */
+-	int		hfp;		/* Horizontal front porch */
+-	int		hbp;		/* Horizontal back porch */
+-	int		vsw;		/* Vertical synchronization
+-					   pulse width */
+-	int		vfp;		/* Vertical front porch */
+-	int		vbp;		/* Vertical back porch */
+-	int		acb;		/* ac-bias pin frequency */
+-	int		pcd;		/* pixel clock divider.
+-					   Obsolete use pixel_clock instead */
+-
+-	int		(*init)		(struct lcd_panel *panel,
+-					 struct omapfb_device *fbdev);
+-	void		(*cleanup)	(struct lcd_panel *panel);
+-	int		(*enable)	(struct lcd_panel *panel);
+-	void		(*disable)	(struct lcd_panel *panel);
+-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+-	int		(*set_bklight_level)(struct lcd_panel *panel,
+-					     unsigned int level);
+-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+-};
+-
+-struct extif_timings {
+-	int cs_on_time;
+-	int cs_off_time;
+-	int we_on_time;
+-	int we_off_time;
+-	int re_on_time;
+-	int re_off_time;
+-	int we_cycle_time;
+-	int re_cycle_time;
+-	int cs_pulse_width;
+-	int access_time;
+-
+-	int clk_div;
+-
+-	u32 tim[5];		/* set by extif->convert_timings */
+-
+-	int converted;
+-};
+-
+-struct lcd_ctrl_extif {
+-	int  (*init)		(struct omapfb_device *fbdev);
+-	void (*cleanup)		(void);
+-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+-	unsigned long (*get_max_tx_rate)(void);
+-	int  (*convert_timings)	(struct extif_timings *timings);
+-	void (*set_timings)	(const struct extif_timings *timings);
+-	void (*set_bits_per_cycle)(int bpc);
+-	void (*write_command)	(const void *buf, unsigned int len);
+-	void (*read_data)	(void *buf, unsigned int len);
+-	void (*write_data)	(const void *buf, unsigned int len);
+-	void (*transfer_area)	(int width, int height,
+-				 void (callback)(void * data), void *data);
+-	int  (*setup_tearsync)	(unsigned pin_cnt,
+-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+-				 int hs_pol_inv, int vs_pol_inv, int div);
+-	int  (*enable_tearsync) (int enable, unsigned line);
+-
+-	unsigned long		max_transmit_size;
+-};
+-
+-struct omapfb_notifier_block {
+-	struct notifier_block	nb;
+-	void			*data;
+-	int			plane_idx;
+-};
+-
+-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+-					  unsigned long event,
+-					  void *fbi);
+-
+-struct omapfb_mem_region {
+-	u32		paddr;
+-	void __iomem	*vaddr;
+-	unsigned long	size;
+-	u8		type;		/* OMAPFB_PLANE_MEM_* */
+-	unsigned	alloc:1;	/* allocated by the driver */
+-	unsigned	map:1;		/* kernel mapped by the driver */
+-};
+-
+-struct omapfb_mem_desc {
+-	int				region_cnt;
+-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+-};
+-
+-struct lcd_ctrl {
+-	const char	*name;
+-	void		*data;
+-
+-	int		(*init)		  (struct omapfb_device *fbdev,
+-					   int ext_mode,
+-					   struct omapfb_mem_desc *req_md);
+-	void		(*cleanup)	  (void);
+-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+-	int		(*set_update_mode)(enum omapfb_update_mode mode);
+-	enum omapfb_update_mode (*get_update_mode)(void);
+-	int		(*setup_plane)	  (int plane, int channel_out,
+-					   unsigned long offset,
+-					   int screen_width,
+-					   int pos_x, int pos_y, int width,
+-					   int height, int color_mode);
+-	int		(*set_rotate)	  (int angle);
+-	int		(*setup_mem)	  (int plane, size_t size,
+-					   int mem_type, unsigned long *paddr);
+-	int		(*mmap)		  (struct fb_info *info,
+-					   struct vm_area_struct *vma);
+-	int		(*set_scale)	  (int plane,
+-					   int orig_width, int orig_height,
+-					   int out_width, int out_height);
+-	int		(*enable_plane)	  (int plane, int enable);
+-	int		(*update_window)  (struct fb_info *fbi,
+-					   struct omapfb_update_window *win,
+-					   void (*callback)(void *),
+-					   void *callback_data);
+-	void		(*sync)		  (void);
+-	void		(*suspend)	  (void);
+-	void		(*resume)	  (void);
+-	int		(*run_test)	  (int test_num);
+-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+-					   u16 blue, u16 transp,
+-					   int update_hw_mem);
+-	int		(*set_color_key)  (struct omapfb_color_key *ck);
+-	int		(*get_color_key)  (struct omapfb_color_key *ck);
+-};
+-
+-enum omapfb_state {
+-	OMAPFB_DISABLED	= 0,
+-	OMAPFB_SUSPENDED= 99,
+-	OMAPFB_ACTIVE	= 100
+-};
+-
+-struct omapfb_plane_struct {
+-	int				idx;
+-	struct omapfb_plane_info	info;
+-	enum omapfb_color_format	color_mode;
+-	struct omapfb_device		*fbdev;
+-};
+-
+-struct omapfb_device {
+-	int			state;
+-	int                     ext_lcdc;               /* Using external
+-                                                           LCD controller */
+-	struct mutex		rqueue_mutex;
+-
+-	int			palette_size;
+-	u32			pseudo_palette[17];
+-
+-	struct lcd_panel	*panel;			/* LCD panel */
+-	const struct lcd_ctrl	*ctrl;			/* LCD controller */
+-	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
+-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+-							   interface */
+-	struct device		*dev;
+-	struct fb_var_screeninfo	new_var;	/* for mode changes */
+-
+-	struct omapfb_mem_desc		mem_desc;
+-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+-};
+-
+-struct omapfb_platform_data {
+-	struct omap_lcd_config		lcd;
+-	struct omapfb_mem_desc		mem_desc;
+-	void				*ctrl_platform_data;
+-};
+-
+-#ifdef CONFIG_ARCH_OMAP1
+-extern struct lcd_ctrl omap1_lcd_ctrl;
+-#else
+-extern struct lcd_ctrl omap2_disp_ctrl;
+-#endif
+-
+-extern void omapfb_reserve_sdram(void);
+-extern void omapfb_register_panel(struct lcd_panel *panel);
+-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+-				  unsigned long event);
+-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+-				   omapfb_notifier_callback_t callback,
+-				   void *callback_data);
+-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+-extern int  omapfb_update_window_async(struct fb_info *fbi,
+-				       struct omapfb_update_window *win,
+-				       void (*callback)(void *),
+-				       void *callback_data);
+-
+-/* in arch/arm/plat-omap/fb.c */
+-extern void omapfb_set_ctrl_platform_data(void *pdata);
+-
+-#endif /* __KERNEL__ */
+-
+-#endif /* __OMAPFB_H */
+diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c
+index f60a233..8121c09 100644
+--- a/drivers/video/omap/blizzard.c
++++ b/drivers/video/omap/blizzard.c
+@@ -25,9 +25,9 @@
+ #include <linux/fb.h>
+ #include <linux/delay.h>
+ #include <linux/clk.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ #include <mach/blizzard.h>
+ 
+ #include "dispc.h"
+diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
+index c140c21..1915af5 100644
+--- a/drivers/video/omap/dispc.c
++++ b/drivers/video/omap/dispc.c
+@@ -24,9 +24,9 @@
+ #include <linux/vmalloc.h>
+ #include <linux/clk.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/sram.h>
+-#include <mach/omapfb.h>
+ #include <mach/board.h>
+ 
+ #include "dispc.h"
+diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
+index f24df0b..9b4c506 100644
+--- a/drivers/video/omap/hwa742.c
++++ b/drivers/video/omap/hwa742.c
+@@ -25,9 +25,9 @@
+ #include <linux/fb.h>
+ #include <linux/delay.h>
+ #include <linux/clk.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ #include <mach/hwa742.h>
+ 
+ #define HWA742_REV_CODE_REG       0x0
+diff --git a/drivers/video/omap/lcd_2430sdp.c b/drivers/video/omap/lcd_2430sdp.c
+index a22b452..1252cc3 100644
+--- a/drivers/video/omap/lcd_2430sdp.c
++++ b/drivers/video/omap/lcd_2430sdp.c
+@@ -26,9 +26,9 @@
+ #include <linux/delay.h>
+ #include <linux/gpio.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+ 
+ #define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
+diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
+index 3fd5342..4d54725 100644
+--- a/drivers/video/omap/lcd_ams_delta.c
++++ b/drivers/video/omap/lcd_ams_delta.c
+@@ -24,13 +24,13 @@
+ 
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/omapfb.h>
+ 
+ #include <asm/delay.h>
+ #include <asm/io.h>
+ 
+ #include <mach/board-ams-delta.h>
+ #include <mach/hardware.h>
+-#include <mach/omapfb.h>
+ 
+ #define AMS_DELTA_DEFAULT_CONTRAST	112
+ 
+diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
+index beae5d9..e3b2224 100644
+--- a/drivers/video/omap/lcd_apollon.c
++++ b/drivers/video/omap/lcd_apollon.c
+@@ -23,10 +23,10 @@
+ 
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ 
+ /* #define USE_35INCH_LCD 1 */
+ 
+diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
+index 2486237..f7264ea 100644
+--- a/drivers/video/omap/lcd_h3.c
++++ b/drivers/video/omap/lcd_h3.c
+@@ -22,9 +22,9 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c/tps65010.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
+ 
+ #define MODULE_NAME	"omapfb-lcd_h3"
+ 
+diff --git a/drivers/video/omap/lcd_h4.c b/drivers/video/omap/lcd_h4.c
+index 6ff5643..d72df0c 100644
+--- a/drivers/video/omap/lcd_h4.c
++++ b/drivers/video/omap/lcd_h4.c
+@@ -21,8 +21,7 @@
+ 
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+-
+-#include <mach/omapfb.h>
++#include <linux/omapfb.h>
+ 
+ static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+ {
+diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/omap/lcd_inn1510.c
+index 6953ed4..f6e05d7 100644
+--- a/drivers/video/omap/lcd_inn1510.c
++++ b/drivers/video/omap/lcd_inn1510.c
+@@ -22,9 +22,9 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/fpga.h>
+-#include <mach/omapfb.h>
+ 
+ static int innovator1510_panel_init(struct lcd_panel *panel,
+ 				    struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
+index 4c4f7ee..c599e41 100644
+--- a/drivers/video/omap/lcd_inn1610.c
++++ b/drivers/video/omap/lcd_inn1610.c
+@@ -21,9 +21,9 @@
+ 
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
+ 
+ #define MODULE_NAME	"omapfb-lcd_h3"
+ 
+diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
+index 8925230..1c25186 100644
+--- a/drivers/video/omap/lcd_ldp.c
++++ b/drivers/video/omap/lcd_ldp.c
+@@ -25,10 +25,10 @@
+ #include <linux/platform_device.h>
+ #include <linux/delay.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+ 
+ #define LCD_PANEL_BACKLIGHT_GPIO 	(15 + OMAP_MAX_GPIO_LINES)
+diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
+index 1895997..4b28005 100644
+--- a/drivers/video/omap/lcd_mipid.c
++++ b/drivers/video/omap/lcd_mipid.c
+@@ -22,8 +22,8 @@
+ #include <linux/delay.h>
+ #include <linux/workqueue.h>
+ #include <linux/spi/spi.h>
++#include <linux/omapfb.h>
+ 
+-#include <mach/omapfb.h>
+ #include <mach/lcd_mipid.h>
+ 
+ #include "../../cbus/tahvo.h"
+diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c
+index 2fc46c2..1908a2b 100644
+--- a/drivers/video/omap/lcd_omap2evm.c
++++ b/drivers/video/omap/lcd_omap2evm.c
+@@ -25,9 +25,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+ 
+ #define LCD_PANEL_ENABLE_GPIO	154
+diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c
+index eae43e4..6be117e 100644
+--- a/drivers/video/omap/lcd_omap3beagle.c
++++ b/drivers/video/omap/lcd_omap3beagle.c
+@@ -24,9 +24,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+ 
+ #define LCD_PANEL_ENABLE_GPIO       170
+diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c
+index 1c3d814..10ba48c 100644
+--- a/drivers/video/omap/lcd_omap3evm.c
++++ b/drivers/video/omap/lcd_omap3evm.c
+@@ -24,9 +24,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+ 
+ #define LCD_PANEL_ENABLE_GPIO       153
+diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
+index 379c96d..d6b193e 100644
+--- a/drivers/video/omap/lcd_osk.c
++++ b/drivers/video/omap/lcd_osk.c
+@@ -22,10 +22,10 @@
+ 
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ 
+ static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
+ {
+diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
+index 2bc5c92..40c2026 100644
+--- a/drivers/video/omap/lcd_overo.c
++++ b/drivers/video/omap/lcd_overo.c
+@@ -22,10 +22,10 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <asm/mach-types.h>
+ 
+ #define LCD_ENABLE       144
+diff --git a/drivers/video/omap/lcd_p2.c b/drivers/video/omap/lcd_p2.c
+index dd40fd7..bc5abef 100644
+--- a/drivers/video/omap/lcd_p2.c
++++ b/drivers/video/omap/lcd_p2.c
+@@ -24,10 +24,10 @@
+ #include <linux/module.h>
+ #include <linux/delay.h>
+ #include <linux/platform_device.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/mux.h>
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
+ 
+ /*
+  * File: epson-md-tft.h
+diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/omap/lcd_palmte.c
+index 2183173..dcb456c 100644
+--- a/drivers/video/omap/lcd_palmte.c
++++ b/drivers/video/omap/lcd_palmte.c
+@@ -22,9 +22,9 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/fpga.h>
+-#include <mach/omapfb.h>
+ 
+ static int palmte_panel_init(struct lcd_panel *panel,
+ 				struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
+index 57b0f6c..e8adab8 100644
+--- a/drivers/video/omap/lcd_palmtt.c
++++ b/drivers/video/omap/lcd_palmtt.c
+@@ -28,9 +28,9 @@ GPIO13 - screen blanking
+ #include <linux/platform_device.h>
+ #include <linux/module.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/gpio.h>
+-#include <mach/omapfb.h>
+ 
+ static int palmtt_panel_init(struct lcd_panel *panel,
+ 	struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/omap/lcd_palmz71.c
+index d33d78b..d5b3f82 100644
+--- a/drivers/video/omap/lcd_palmz71.c
++++ b/drivers/video/omap/lcd_palmz71.c
+@@ -23,8 +23,7 @@
+ #include <linux/module.h>
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
+-
+-#include <mach/omapfb.h>
++#include <linux/omapfb.h>
+ 
+ static int palmz71_panel_init(struct lcd_panel *panel,
+ 			      struct omapfb_device *fbdev)
+diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c
+index ab39492..633e33c 100644
+--- a/drivers/video/omap/lcdc.c
++++ b/drivers/video/omap/lcdc.c
+@@ -28,9 +28,9 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/vmalloc.h>
+ #include <linux/clk.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ 
+ #include <asm/mach-types.h>
+ 
+diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
+index 3bb4247..c6306af 100644
+--- a/drivers/video/omap/omapfb_main.c
++++ b/drivers/video/omap/omapfb_main.c
+@@ -27,9 +27,9 @@
+ #include <linux/platform_device.h>
+ #include <linux/mm.h>
+ #include <linux/uaccess.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ 
+ #include "lcdc.h"
+ #include "dispc.h"
+diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
+index 29fa368..118cfa9 100644
+--- a/drivers/video/omap/rfbi.c
++++ b/drivers/video/omap/rfbi.c
+@@ -26,8 +26,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/clk.h>
+ #include <linux/io.h>
+-
+-#include <mach/omapfb.h>
++#include <linux/omapfb.h>
+ 
+ #include "dispc.h"
+ 
+diff --git a/drivers/video/omap/sossi.c b/drivers/video/omap/sossi.c
+index cc697cc..ff9dd71 100644
+--- a/drivers/video/omap/sossi.c
++++ b/drivers/video/omap/sossi.c
+@@ -23,9 +23,9 @@
+ #include <linux/clk.h>
+ #include <linux/irq.h>
+ #include <linux/io.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/dma.h>
+-#include <mach/omapfb.h>
+ 
+ #include "lcdc.h"
+ 
+diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
+new file mode 100644
+index 0000000..b226bdf
+--- /dev/null
++++ b/include/linux/omapfb.h
+@@ -0,0 +1,398 @@
++/*
++ * File: arch/arm/plat-omap/include/mach/omapfb.h
++ *
++ * Framebuffer driver for TI OMAP boards
++ *
++ * Copyright (C) 2004 Nokia Corporation
++ * Author: Imre Deak <imre.deak@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++#ifndef __OMAPFB_H
++#define __OMAPFB_H
++
++#include <asm/ioctl.h>
++#include <asm/types.h>
++
++/* IOCTL commands. */
++
++#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
++#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
++#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
++#define OMAP_IO(num)		_IO('O', num)
++
++#define OMAPFB_MIRROR		OMAP_IOW(31, int)
++#define OMAPFB_SYNC_GFX		OMAP_IO(37)
++#define OMAPFB_VSYNC		OMAP_IO(38)
++#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
++#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
++#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
++#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
++#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
++#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
++#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
++#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
++#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
++#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
++#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
++#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
++#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
++
++#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
++#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
++#define OMAPFB_CAPS_PANEL_MASK		0xff000000
++
++#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
++#define OMAPFB_CAPS_TEARSYNC		0x00002000
++#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
++#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
++#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
++#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
++#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
++#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
++#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
++
++/* Values from DSP must map to lower 16-bits */
++#define OMAPFB_FORMAT_MASK		0x00ff
++#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
++#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
++#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
++#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
++#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
++
++#define OMAPFB_EVENT_READY	1
++#define OMAPFB_EVENT_DISABLED	2
++
++#define OMAPFB_MEMTYPE_SDRAM		0
++#define OMAPFB_MEMTYPE_SRAM		1
++#define OMAPFB_MEMTYPE_MAX		1
++
++enum omapfb_color_format {
++	OMAPFB_COLOR_RGB565 = 0,
++	OMAPFB_COLOR_YUV422,
++	OMAPFB_COLOR_YUV420,
++	OMAPFB_COLOR_CLUT_8BPP,
++	OMAPFB_COLOR_CLUT_4BPP,
++	OMAPFB_COLOR_CLUT_2BPP,
++	OMAPFB_COLOR_CLUT_1BPP,
++	OMAPFB_COLOR_RGB444,
++	OMAPFB_COLOR_YUY422,
++};
++
++struct omapfb_update_window {
++	__u32 x, y;
++	__u32 width, height;
++	__u32 format;
++	__u32 out_x, out_y;
++	__u32 out_width, out_height;
++	__u32 reserved[8];
++};
++
++struct omapfb_update_window_old {
++	__u32 x, y;
++	__u32 width, height;
++	__u32 format;
++};
++
++enum omapfb_plane {
++	OMAPFB_PLANE_GFX = 0,
++	OMAPFB_PLANE_VID1,
++	OMAPFB_PLANE_VID2,
++};
++
++enum omapfb_channel_out {
++	OMAPFB_CHANNEL_OUT_LCD = 0,
++	OMAPFB_CHANNEL_OUT_DIGIT,
++};
++
++struct omapfb_plane_info {
++	__u32 pos_x;
++	__u32 pos_y;
++	__u8  enabled;
++	__u8  channel_out;
++	__u8  mirror;
++	__u8  reserved1;
++	__u32 out_width;
++	__u32 out_height;
++	__u32 reserved2[12];
++};
++
++struct omapfb_mem_info {
++	__u32 size;
++	__u8  type;
++	__u8  reserved[3];
++};
++
++struct omapfb_caps {
++	__u32 ctrl;
++	__u32 plane_color;
++	__u32 wnd_color;
++};
++
++enum omapfb_color_key_type {
++	OMAPFB_COLOR_KEY_DISABLED = 0,
++	OMAPFB_COLOR_KEY_GFX_DST,
++	OMAPFB_COLOR_KEY_VID_SRC,
++};
++
++struct omapfb_color_key {
++	__u8  channel_out;
++	__u32 background;
++	__u32 trans_key;
++	__u8  key_type;
++};
++
++enum omapfb_update_mode {
++	OMAPFB_UPDATE_DISABLED = 0,
++	OMAPFB_AUTO_UPDATE,
++	OMAPFB_MANUAL_UPDATE
++};
++
++#ifdef __KERNEL__
++
++#include <linux/completion.h>
++#include <linux/interrupt.h>
++#include <linux/fb.h>
++#include <linux/mutex.h>
++
++#include <mach/board.h>
++
++#define OMAP_LCDC_INV_VSYNC             0x0001
++#define OMAP_LCDC_INV_HSYNC             0x0002
++#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
++#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
++#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
++#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
++
++#define OMAP_LCDC_SIGNAL_MASK		0x003f
++
++#define OMAP_LCDC_PANEL_TFT		0x0100
++
++#define OMAPFB_PLANE_XRES_MIN		8
++#define OMAPFB_PLANE_YRES_MIN		8
++
++#ifdef CONFIG_ARCH_OMAP1
++#define OMAPFB_PLANE_NUM		1
++#else
++#define OMAPFB_PLANE_NUM		3
++#endif
++
++struct omapfb_device;
++
++struct lcd_panel {
++	const char	*name;
++	int		config;		/* TFT/STN, signal inversion */
++	int		bpp;		/* Pixel format in fb mem */
++	int		data_lines;	/* Lines on LCD HW interface */
++
++	int		x_res, y_res;
++	int		pixel_clock;	/* In kHz */
++	int		hsw;		/* Horizontal synchronization
++					   pulse width */
++	int		hfp;		/* Horizontal front porch */
++	int		hbp;		/* Horizontal back porch */
++	int		vsw;		/* Vertical synchronization
++					   pulse width */
++	int		vfp;		/* Vertical front porch */
++	int		vbp;		/* Vertical back porch */
++	int		acb;		/* ac-bias pin frequency */
++	int		pcd;		/* pixel clock divider.
++					   Obsolete use pixel_clock instead */
++
++	int		(*init)		(struct lcd_panel *panel,
++					 struct omapfb_device *fbdev);
++	void		(*cleanup)	(struct lcd_panel *panel);
++	int		(*enable)	(struct lcd_panel *panel);
++	void		(*disable)	(struct lcd_panel *panel);
++	unsigned long	(*get_caps)	(struct lcd_panel *panel);
++	int		(*set_bklight_level)(struct lcd_panel *panel,
++					     unsigned int level);
++	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
++	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
++	int		(*run_test)	(struct lcd_panel *panel, int test_num);
++};
++
++struct extif_timings {
++	int cs_on_time;
++	int cs_off_time;
++	int we_on_time;
++	int we_off_time;
++	int re_on_time;
++	int re_off_time;
++	int we_cycle_time;
++	int re_cycle_time;
++	int cs_pulse_width;
++	int access_time;
++
++	int clk_div;
++
++	u32 tim[5];		/* set by extif->convert_timings */
++
++	int converted;
++};
++
++struct lcd_ctrl_extif {
++	int  (*init)		(struct omapfb_device *fbdev);
++	void (*cleanup)		(void);
++	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
++	unsigned long (*get_max_tx_rate)(void);
++	int  (*convert_timings)	(struct extif_timings *timings);
++	void (*set_timings)	(const struct extif_timings *timings);
++	void (*set_bits_per_cycle)(int bpc);
++	void (*write_command)	(const void *buf, unsigned int len);
++	void (*read_data)	(void *buf, unsigned int len);
++	void (*write_data)	(const void *buf, unsigned int len);
++	void (*transfer_area)	(int width, int height,
++				 void (callback)(void * data), void *data);
++	int  (*setup_tearsync)	(unsigned pin_cnt,
++				 unsigned hs_pulse_time, unsigned vs_pulse_time,
++				 int hs_pol_inv, int vs_pol_inv, int div);
++	int  (*enable_tearsync) (int enable, unsigned line);
++
++	unsigned long		max_transmit_size;
++};
++
++struct omapfb_notifier_block {
++	struct notifier_block	nb;
++	void			*data;
++	int			plane_idx;
++};
++
++typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
++					  unsigned long event,
++					  void *fbi);
++
++struct omapfb_mem_region {
++	u32		paddr;
++	void __iomem	*vaddr;
++	unsigned long	size;
++	u8		type;		/* OMAPFB_PLANE_MEM_* */
++	unsigned	alloc:1;	/* allocated by the driver */
++	unsigned	map:1;		/* kernel mapped by the driver */
++};
++
++struct omapfb_mem_desc {
++	int				region_cnt;
++	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
++};
++
++struct lcd_ctrl {
++	const char	*name;
++	void		*data;
++
++	int		(*init)		  (struct omapfb_device *fbdev,
++					   int ext_mode,
++					   struct omapfb_mem_desc *req_md);
++	void		(*cleanup)	  (void);
++	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
++	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
++	int		(*set_update_mode)(enum omapfb_update_mode mode);
++	enum omapfb_update_mode (*get_update_mode)(void);
++	int		(*setup_plane)	  (int plane, int channel_out,
++					   unsigned long offset,
++					   int screen_width,
++					   int pos_x, int pos_y, int width,
++					   int height, int color_mode);
++	int		(*set_rotate)	  (int angle);
++	int		(*setup_mem)	  (int plane, size_t size,
++					   int mem_type, unsigned long *paddr);
++	int		(*mmap)		  (struct fb_info *info,
++					   struct vm_area_struct *vma);
++	int		(*set_scale)	  (int plane,
++					   int orig_width, int orig_height,
++					   int out_width, int out_height);
++	int		(*enable_plane)	  (int plane, int enable);
++	int		(*update_window)  (struct fb_info *fbi,
++					   struct omapfb_update_window *win,
++					   void (*callback)(void *),
++					   void *callback_data);
++	void		(*sync)		  (void);
++	void		(*suspend)	  (void);
++	void		(*resume)	  (void);
++	int		(*run_test)	  (int test_num);
++	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
++					   u16 blue, u16 transp,
++					   int update_hw_mem);
++	int		(*set_color_key)  (struct omapfb_color_key *ck);
++	int		(*get_color_key)  (struct omapfb_color_key *ck);
++};
++
++enum omapfb_state {
++	OMAPFB_DISABLED	= 0,
++	OMAPFB_SUSPENDED= 99,
++	OMAPFB_ACTIVE	= 100
++};
++
++struct omapfb_plane_struct {
++	int				idx;
++	struct omapfb_plane_info	info;
++	enum omapfb_color_format	color_mode;
++	struct omapfb_device		*fbdev;
++};
++
++struct omapfb_device {
++	int			state;
++	int                     ext_lcdc;               /* Using external
++                                                           LCD controller */
++	struct mutex		rqueue_mutex;
++
++	int			palette_size;
++	u32			pseudo_palette[17];
++
++	struct lcd_panel	*panel;			/* LCD panel */
++	const struct lcd_ctrl	*ctrl;			/* LCD controller */
++	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
++	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
++							   interface */
++	struct device		*dev;
++	struct fb_var_screeninfo	new_var;	/* for mode changes */
++
++	struct omapfb_mem_desc		mem_desc;
++	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
++};
++
++struct omapfb_platform_data {
++	struct omap_lcd_config		lcd;
++	struct omapfb_mem_desc		mem_desc;
++	void				*ctrl_platform_data;
++};
++
++#ifdef CONFIG_ARCH_OMAP1
++extern struct lcd_ctrl omap1_lcd_ctrl;
++#else
++extern struct lcd_ctrl omap2_disp_ctrl;
++#endif
++
++extern void omapfb_reserve_sdram(void);
++extern void omapfb_register_panel(struct lcd_panel *panel);
++extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
++extern void omapfb_notify_clients(struct omapfb_device *fbdev,
++				  unsigned long event);
++extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
++				   omapfb_notifier_callback_t callback,
++				   void *callback_data);
++extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
++extern int  omapfb_update_window_async(struct fb_info *fbi,
++				       struct omapfb_update_window *win,
++				       void (*callback)(void *),
++				       void *callback_data);
++
++/* in arch/arm/plat-omap/fb.c */
++extern void omapfb_set_ctrl_platform_data(void *pdata);
++
++#endif /* __KERNEL__ */
++
++#endif /* __OMAPFB_H */
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch b/recipes/linux/linux-omap-pm/dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch
index 2c77fcc205..c3523362c6 100644
--- a/recipes/linux/linux-omap-pm/0001-DSS-New-display-subsystem-driver-for-OMAP2-3.patch
+++ b/recipes/linux/linux-omap-pm/dss2/0003-DSS2-OMAP2-3-Display-Subsystem-driver.patch
@@ -1,54 +1,74 @@
-From 3128e95ff7e6a1bed47cc5c64a138cc3bbab492a Mon Sep 17 00:00:00 2001
+From 284deec412f9c6f15c971d8eaf4d0156a51a2f3b Mon Sep 17 00:00:00 2001
 From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Wed, 7 Jan 2009 14:30:09 +0200
-Subject: [PATCH] DSS: New display subsystem driver for OMAP2/3
+Date: Thu, 2 Apr 2009 10:23:42 +0300
+Subject: [PATCH] DSS2: OMAP2/3 Display Subsystem driver
 
 Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 ---
- Documentation/arm/OMAP/DSS                |  266 +++
- arch/arm/plat-omap/Kconfig                |    2 +
- arch/arm/plat-omap/Makefile               |    2 +
- arch/arm/plat-omap/dss/Kconfig            |   69 +
- arch/arm/plat-omap/dss/Makefile           |    6 +
- arch/arm/plat-omap/dss/dispc.c            | 2113 +++++++++++++++++++
- arch/arm/plat-omap/dss/display.c          |  787 +++++++
- arch/arm/plat-omap/dss/dpi.c              |  344 ++++
- arch/arm/plat-omap/dss/dsi.c              | 3187 +++++++++++++++++++++++++++++
- arch/arm/plat-omap/dss/dss.c              |  774 +++++++
- arch/arm/plat-omap/dss/dss.h              |  274 +++
- arch/arm/plat-omap/dss/rfbi.c             | 1262 ++++++++++++
- arch/arm/plat-omap/dss/sdi.c              |  174 ++
- arch/arm/plat-omap/dss/venc.c             |  506 +++++
- arch/arm/plat-omap/include/mach/display.h |  462 +++++
- 15 files changed, 10228 insertions(+), 0 deletions(-)
+ Documentation/arm/OMAP/DSS                |  311 +++
+ arch/arm/plat-omap/Makefile               |    2 +-
+ arch/arm/plat-omap/include/mach/display.h |  520 ++++
+ arch/arm/plat-omap/include/mach/vram.h    |   33 +
+ arch/arm/plat-omap/include/mach/vrfb.h    |   47 +
+ arch/arm/plat-omap/vram.c                 |  615 +++++
+ arch/arm/plat-omap/vrfb.c                 |  159 ++
+ drivers/video/Kconfig                     |    1 +
+ drivers/video/Makefile                    |    1 +
+ drivers/video/omap2/Kconfig               |    3 +
+ drivers/video/omap2/Makefile              |    4 +
+ drivers/video/omap2/dss/Kconfig           |   89 +
+ drivers/video/omap2/dss/Makefile          |    6 +
+ drivers/video/omap2/dss/core.c            |  641 +++++
+ drivers/video/omap2/dss/dispc.c           | 2968 +++++++++++++++++++++++
+ drivers/video/omap2/dss/display.c         |  693 ++++++
+ drivers/video/omap2/dss/dpi.c             |  393 +++
+ drivers/video/omap2/dss/dsi.c             | 3752 +++++++++++++++++++++++++++++
+ drivers/video/omap2/dss/dss.c             |  345 +++
+ drivers/video/omap2/dss/dss.h             |  331 +++
+ drivers/video/omap2/dss/manager.c         |  576 +++++
+ drivers/video/omap2/dss/overlay.c         |  587 +++++
+ drivers/video/omap2/dss/rfbi.c            | 1304 ++++++++++
+ drivers/video/omap2/dss/sdi.c             |  245 ++
+ drivers/video/omap2/dss/venc.c            |  600 +++++
+ 25 files changed, 14225 insertions(+), 1 deletions(-)
  create mode 100644 Documentation/arm/OMAP/DSS
- create mode 100644 arch/arm/plat-omap/dss/Kconfig
- create mode 100644 arch/arm/plat-omap/dss/Makefile
- create mode 100644 arch/arm/plat-omap/dss/dispc.c
- create mode 100644 arch/arm/plat-omap/dss/display.c
- create mode 100644 arch/arm/plat-omap/dss/dpi.c
- create mode 100644 arch/arm/plat-omap/dss/dsi.c
- create mode 100644 arch/arm/plat-omap/dss/dss.c
- create mode 100644 arch/arm/plat-omap/dss/dss.h
- create mode 100644 arch/arm/plat-omap/dss/rfbi.c
- create mode 100644 arch/arm/plat-omap/dss/sdi.c
- create mode 100644 arch/arm/plat-omap/dss/venc.c
  create mode 100644 arch/arm/plat-omap/include/mach/display.h
+ create mode 100644 arch/arm/plat-omap/include/mach/vram.h
+ create mode 100644 arch/arm/plat-omap/include/mach/vrfb.h
+ create mode 100644 arch/arm/plat-omap/vram.c
+ create mode 100644 arch/arm/plat-omap/vrfb.c
+ create mode 100644 drivers/video/omap2/Kconfig
+ create mode 100644 drivers/video/omap2/Makefile
+ create mode 100644 drivers/video/omap2/dss/Kconfig
+ create mode 100644 drivers/video/omap2/dss/Makefile
+ create mode 100644 drivers/video/omap2/dss/core.c
+ create mode 100644 drivers/video/omap2/dss/dispc.c
+ create mode 100644 drivers/video/omap2/dss/display.c
+ create mode 100644 drivers/video/omap2/dss/dpi.c
+ create mode 100644 drivers/video/omap2/dss/dsi.c
+ create mode 100644 drivers/video/omap2/dss/dss.c
+ create mode 100644 drivers/video/omap2/dss/dss.h
+ create mode 100644 drivers/video/omap2/dss/manager.c
+ create mode 100644 drivers/video/omap2/dss/overlay.c
+ create mode 100644 drivers/video/omap2/dss/rfbi.c
+ create mode 100644 drivers/video/omap2/dss/sdi.c
+ create mode 100644 drivers/video/omap2/dss/venc.c
 
 diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
 new file mode 100644
-index 0000000..a5e608c
+index 0000000..9e902a2
 --- /dev/null
 +++ b/Documentation/arm/OMAP/DSS
-@@ -0,0 +1,266 @@
+@@ -0,0 +1,311 @@
 +OMAP2/3 Display Subsystem
 +-------------------------
 +
 +This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
 +(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
-+TV-out and multiple display support.
++TV-out and multiple display support, but there are lots of small improvements
++also.
 +
-+The DSS2 driver (omap-dss module) is in arch/arm/plat-omap/dss/, and the FB,
++The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
 +panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
 +currently side by side, you can choose which one to use.
 +
@@ -59,7 +79,7 @@ index 0000000..a5e608c
 +
 +- MIPI DPI (parallel) output
 +- MIPI DSI output in command mode
-+- MIPI DBI (RFBI) output (not tested for a while, might've gotten broken)
++- MIPI DBI (RFBI) output
 +- SDI output
 +- TV output
 +- All pieces can be compiled as a module or inside kernel
@@ -72,8 +92,13 @@ index 0000000..a5e608c
 +- Adjusting DSS FCK to find a good pixel clock
 +- Use DSI DPLL to create DSS FCK
 +
-+omap-dss driver
-+------------
++Tested boards include:
++- OMAP3 SDP board
++- Beagle board
++- N810
++
++omapdss driver
++--------------
 +
 +The DSS driver does not itself have any support for Linux framebuffer, V4L or
 +such like the current ones, but it has an internal kernel API that upper level
@@ -81,15 +106,15 @@ index 0000000..a5e608c
 +
 +The DSS driver models OMAP's overlays, overlay managers and displays in a
 +flexible way to enable non-common multi-display configuration. In addition to
-+modelling the hardware overlays, omap-dss supports virtual overlays and overlay
++modelling the hardware overlays, omapdss supports virtual overlays and overlay
 +managers. These can be used when updating a display with CPU or system DMA.
 +
 +Panel and controller drivers
 +----------------------------
 +
 +The drivers implement panel or controller specific functionality and are not
-+visible to users except through omapfb driver.  They register themselves to the
-+DSS driver.
++usually visible to users except through omapfb driver.  They register
++themselves to the DSS driver.
 +
 +omapfb driver
 +-------------
@@ -107,17 +132,19 @@ index 0000000..a5e608c
 +V4L2 drivers
 +------------
 +
-+Currently there are no V4L2 display drivers planned, but it is possible to
-+implement such either to omapfb driver, or as a separate one. From omap-dss
-+point of view the V4L2 drivers should be similar to framebuffer driver.
++V4L2 is being implemented in TI.
++
++From omapdss point of view the V4L2 drivers should be similar to framebuffer
++driver.
 +
 +Architecture
 +--------------------
 +
 +Some clarification what the different components do:
 +
-+    - Framebuffer is a memory area inside OMAP's SDRAM that contains the pixel
-+      data for the image. Framebuffer has width and height and color depth.
++    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
++      pixel data for the image. Framebuffer has width and height and color
++      depth.
 +    - Overlay defines where the pixels are read from and where they go on the
 +      screen. The overlay may be smaller than framebuffer, thus displaying only
 +      part of the framebuffer. The position of the overlay may be changed if
@@ -145,54 +172,69 @@ index 0000000..a5e608c
 +
 +Sysfs
 +-----
-+The sysfs interface is a hack, but works for testing. I don't think sysfs
++The sysfs interface is mainly used for testing. I don't think sysfs
 +interface is the best for this in the final version, but I don't quite know
 +what would be the best interfaces for these things.
 +
-+In /sys/devices/platform/omapfb we have four files: framebuffers,
-+overlays, managers and displays. You can read them so see the current
-+setup, and change them by writing to it in the form of
-+"<item-id> <opt1>:<val1> <opt2>:<val2>..."
-+
-+"framebuffers" lists all framebuffers. Its format is:
-+	<fb number>
-+	p:<physical address, read only>
-+	v:<virtual address, read only>
-+	s:<size, read only>
-+	t:<target overlay>
-+
-+"overlays" lists all overlays. Its format is:
-+	<overlay name>
-+	t:<target manager>
-+	x:<xpos>
-+	y:<ypos>
-+	iw:<input width, read only>
-+	ih:<input height, read only>
-+	w:<output width>
-+	h:<output height>
-+	e:<enabled>
-+
-+"managers" lists all overlay managers. Its format is:
-+	<manager name>
-+	t:<target display>
-+
-+"displays" lists all displays. Its format is:
-+	<display name>
-+	e:<enabled>
-+	u:<update mode>
-+	t:<tear sync on/off>
-+	h:<xres/hfp/hbp/hsw>
-+	v:<yres/vfp/vbp/vsw>
-+	p:<pix clock, in kHz>
-+	m:<mode str, as in drivers/video/modedb.c:fb_find_mode>
-+
-+There is also a debug sysfs file at /sys/devices/platform/omap-dss/clk which
-+shows how DSS has configured the clocks.
++The sysfs interface is divided to two parts: DSS and FB.
++
++/sys/class/graphics/fb? directory:
++mirror		0=off, 1=on
++rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
++rotate_type	0 = DMA rotation, 1 = VRFB rotation
++overlays	List of overlay numbers to which framebuffer pixels go
++phys_addr	Physical address of the framebuffer
++virt_addr	Virtual address of the framebuffer
++size		Size of the framebuffer
++
++/sys/devices/platform/omapdss/overlay? directory:
++enabled		0=off, 1=on
++input_size	width,height (ie. the framebuffer size)
++manager		Destination overlay manager name
++name
++output_size	width,height
++position	x,y
++screen_width	width
++
++/sys/devices/platform/omapdss/manager? directory:
++display		Destination display
++name
++
++/sys/devices/platform/omapdss/display? directory:
++ctrl_name	Controller name
++mirror		0=off, 1=on
++update_mode	0=off, 1=auto, 2=manual
++enabled		0=off, 1=on
++name
++rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
++timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
++		When writing, two special timings are accepted for tv-out:
++		"pal" and "ntsc"
++panel_name
++tear_elim	Tearing elimination 0=off, 1=on
++
++There are also some debugfs files at <debugfs>/omapdss/ which show information
++about clocks and registers.
 +
 +Examples
 +--------
 +
-+In the example scripts "omapfb" is a symlink to /sys/devices/platform/omapfb/.
++The following definitions have been made for the examples below:
++
++ovl0=/sys/devices/platform/omapdss/overlay0
++ovl1=/sys/devices/platform/omapdss/overlay1
++ovl2=/sys/devices/platform/omapdss/overlay2
++
++mgr0=/sys/devices/platform/omapdss/manager0
++mgr1=/sys/devices/platform/omapdss/manager1
++
++lcd=/sys/devices/platform/omapdss/display0
++dvi=/sys/devices/platform/omapdss/display1
++tv=/sys/devices/platform/omapdss/display2
++
++fb0=/sys/class/graphics/fb0
++fb1=/sys/class/graphics/fb1
++fb2=/sys/class/graphics/fb2
 +
 +Default setup on OMAP3 SDP
 +--------------------------
@@ -206,19 +248,18 @@ index 0000000..a5e608c
 +FB1 --- VID1 --+- LCD ---- LCD
 +FB2 --- VID2 -/   TV ----- TV
 +
-+Switch from LCD to DVI
++Example: Switch from LCD to DVI
 +----------------------
 +
-+dviline=`cat omapfb/displays |grep dvi`
-+w=`echo $dviline | cut -d " " -f 5 | cut -d ":" -f 2 | cut -d "/" -f 1`
-+h=`echo $dviline | cut -d " " -f 6 | cut -d ":" -f 2 | cut -d "/" -f 1`
++w=`cat $dvi/horizontal | cut -d "," -f 1`
++h=`cat $dvi/vertical | cut -d "," -f 1`
 +
-+echo "lcd e:0" > omapfb/displays
-+echo "lcd t:none" > omapfb/managers
-+fbset -fb /dev/fb0 -xres $w -yres $h
++echo "0" > $lcd/enabled
++echo "" > $mgr0/display
++fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
 +# at this point you have to switch the dvi/lcd dip-switch from the omap board
-+echo "lcd t:dvi" > omapfb/managers
-+echo "dvi e:1" > omapfb/displays
++echo "dvi" > $mgr0/display
++echo "1" > $dvi/enabled
 +
 +After this the configuration looks like:
 +
@@ -226,18 +267,25 @@ index 0000000..a5e608c
 +FB1 --- VID1 --+- LCD -/   LCD
 +FB2 --- VID2 -/   TV ----- TV
 +
-+Clone GFX overlay to LCD and TV
++Example: Clone GFX overlay to LCD and TV
 +-------------------------------
 +
-+tvline=`cat /sys/devices/platform/omapfb/displays |grep tv`
-+w=`echo $tvline | cut -d " " -f 5 | cut -d ":" -f 2 | cut -d "/" -f 1`
-+h=`echo $tvline | cut -d " " -f 6 | cut -d ":" -f 2 | cut -d "/" -f 1`
++w=`cat $tv/horizontal | cut -d "," -f 1`
++h=`cat $tv/vertical | cut -d "," -f 1`
++
++echo "0" > $ovl0/enabled
++echo "0" > $ovl1/enabled
++
++echo "" > $fb1/overlays
++echo "0,1" > $fb0/overlays
++
++echo "$w,$h" > $ovl1/output_size
++echo "tv" > $ovl1/manager
 +
-+echo "1 t:none" > omapfb/framebuffers
-+echo "0 t:gfx,vid1" > omapfb/framebuffers
-+echo "gfx e:1" > omapfb/overlays
-+echo "vid1 t:tv w:$w h:$h e:1" > omapfb/overlays
-+echo "tv e:1" > omapfb/displays
++echo "1" > $ovl0/enabled
++echo "1" > $ovl1/enabled
++
++echo "1" > $tv/enabled
 +
 +After this the configuration looks like (only relevant parts shown):
 +
@@ -247,36 +295,64 @@ index 0000000..a5e608c
 +Misc notes
 +----------
 +
-+OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator. If
-+that fails, it will fall back to dma_alloc_writecombine().
++OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
 +
 +Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
 +of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
 +
-+Arguments
-+---------
++Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
++does not support mirroring.
++
++VRFB rotation requires much more memory than non-rotated framebuffer, so you
++probably need to increase your vram setting before using VRFB rotation. Also,
++many applications may not work with VRFB if they do not pay attention to all
++framebuffer parameters.
++
++Kernel boot arguments
++---------------------
 +
-+vram
-+	- Amount of total VRAM to preallocate. For example, "10M".
++vram=<size>
++	- Amount of total VRAM to preallocate. For example, "10M". omapfb
++	  allocates memory for framebuffers from VRAM.
 +
-+omapfb.video_mode
-+	- Default video mode for default display. For example,
-+	  "800x400MR-24@60".  See drivers/video/modedb.c
++omapfb.mode=<display>:<mode>[,...]
++	- Default video mode for specified displays. For example,
++	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
++	  There are also two special modes: "pal" and "ntsc" that
++	  can be used to tv out.
 +
-+omapfb.vram
-+	- VRAM allocated for each framebuffer. Normally omapfb allocates vram
++omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
++	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
 +	  depending on the display size. With this you can manually allocate
-+	  more. For example "4M,3M" allocates 4M for fb0, 3M for fb1.
++	  more or define the physical address of each framebuffer. For example,
++	  "1:4M" to allocate 4M for fb1.
 +
-+omapfb.debug
++omapfb.debug=<y|n>
 +	- Enable debug printing. You have to have OMAPFB debug support enabled
 +	  in kernel config.
 +
-+omap-dss.def_disp
++omapfb.test=<y|n>
++	- Draw test pattern to framebuffer whenever framebuffer settings change.
++	  You need to have OMAPFB debug support enabled in kernel config.
++
++omapfb.vrfb=<y|n>
++	- Use VRFB rotation for all framebuffers.
++
++omapfb.rotate=<angle>
++	- Default rotation applied to all framebuffers.
++	  0 - 0 degree rotation
++	  1 - 90 degree rotation
++	  2 - 180 degree rotation
++	  3 - 270 degree rotation
++
++omapfb.mirror=<y|n>
++	- Default mirror for all framebuffers. Only works with DMA rotation.
++
++omapdss.def_disp=<display>
 +	- Name of default display, to which all overlays will be connected.
 +	  Common examples are "lcd" or "tv".
 +
-+omap-dss.debug
++omapdss.debug=<y|n>
 +	- Enable debug printing. You have to have DSS debug support enabled in
 +	  kernel config.
 +
@@ -288,45 +364,1480 @@ index 0000000..a5e608c
 +Error checking
 +- Lots of checks are missing or implemented just as BUG()
 +
-+Rotate (external FB)
-+Rotate (VRFB)
-+Rotate (SMS)
-+
 +System DMA update for DSI
 +- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
 +  to skip the empty byte?)
 +
-+Power management
-+- Context saving
-+
-+Resolution change
-+- The x/y res of the framebuffer are not display resolutions, but the size
-+  of the overlay.
-+- The display resolution affects all planes on the display.
-+
 +OMAP1 support
 +- Not sure if needed
 +
-diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
-index 2465aea..cd7d9e2 100644
---- a/arch/arm/plat-omap/Kconfig
-+++ b/arch/arm/plat-omap/Kconfig
-@@ -245,6 +245,8 @@ config OMAP_SERIAL_WAKE
- 	  to data on the serial RX line. This allows you to wake the
- 	  system from serial console.
+diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
+index 3ebc09e..e6146b2 100644
+--- a/arch/arm/plat-omap/Makefile
++++ b/arch/arm/plat-omap/Makefile
+@@ -4,7 +4,7 @@
  
-+source "arch/arm/plat-omap/dss/Kconfig"
+ # Common support
+ obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
+-	 usb.o fb.o io.o
++	 usb.o fb.o vram.o vrfb.o io.o
+ obj-m :=
+ obj-n :=
+ obj-  :=
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+new file mode 100644
+index 0000000..6288353
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -0,0 +1,520 @@
++/*
++ * linux/include/asm-arm/arch-omap/display.h
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __ASM_ARCH_OMAP_DISPLAY_H
++#define __ASM_ARCH_OMAP_DISPLAY_H
++
++#include <linux/list.h>
++#include <linux/kobject.h>
++#include <asm/atomic.h>
++
++#define DISPC_IRQ_FRAMEDONE		(1 << 0)
++#define DISPC_IRQ_VSYNC			(1 << 1)
++#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
++#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
++#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
++#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
++#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
++#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
++#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
++#define DISPC_IRQ_OCP_ERR		(1 << 9)
++#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
++#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
++#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
++#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
++#define DISPC_IRQ_SYNC_LOST		(1 << 14)
++#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
++#define DISPC_IRQ_WAKEUP		(1 << 16)
++
++enum omap_display_type {
++	OMAP_DISPLAY_TYPE_NONE		= 0,
++	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
++	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
++	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
++	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
++	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
++};
++
++enum omap_plane {
++	OMAP_DSS_GFX	= 0,
++	OMAP_DSS_VIDEO1	= 1,
++	OMAP_DSS_VIDEO2	= 2
++};
++
++enum omap_channel {
++	OMAP_DSS_CHANNEL_LCD	= 0,
++	OMAP_DSS_CHANNEL_DIGIT	= 1,
++};
++
++enum omap_color_mode {
++	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
++	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
++	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
++	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
++	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
++	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
++	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
++	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
++	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
++	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
++	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
++	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
++	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
++	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
++
++	OMAP_DSS_COLOR_GFX_OMAP3 =
++		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
++		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
++		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
++		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
++		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
++		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
++
++	OMAP_DSS_COLOR_VID_OMAP3 =
++		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
++		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
++		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
++		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 |
++		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
++};
++
++enum omap_lcd_display_type {
++	OMAP_DSS_LCD_DISPLAY_STN,
++	OMAP_DSS_LCD_DISPLAY_TFT,
++};
++
++enum omap_dss_load_mode {
++	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
++	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
++	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
++	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
++};
++
++enum omap_dss_color_key_type {
++	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
++	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
++};
++
++enum omap_rfbi_te_mode {
++	OMAP_DSS_RFBI_TE_MODE_1 = 1,
++	OMAP_DSS_RFBI_TE_MODE_2 = 2,
++};
++
++enum omap_panel_config {
++	OMAP_DSS_LCD_IVS		= 1<<0,
++	OMAP_DSS_LCD_IHS		= 1<<1,
++	OMAP_DSS_LCD_IPC		= 1<<2,
++	OMAP_DSS_LCD_IEO		= 1<<3,
++	OMAP_DSS_LCD_RF			= 1<<4,
++	OMAP_DSS_LCD_ONOFF		= 1<<5,
++
++	OMAP_DSS_LCD_TFT		= 1<<20,
++};
++
++enum omap_dss_venc_type {
++	OMAP_DSS_VENC_TYPE_COMPOSITE,
++	OMAP_DSS_VENC_TYPE_SVIDEO,
++};
++
++struct omap_display;
++struct omap_panel;
++struct omap_ctrl;
++
++/* RFBI */
++
++struct rfbi_timings {
++	int cs_on_time;
++	int cs_off_time;
++	int we_on_time;
++	int we_off_time;
++	int re_on_time;
++	int re_off_time;
++	int we_cycle_time;
++	int re_cycle_time;
++	int cs_pulse_width;
++	int access_time;
++
++	int clk_div;
++
++	u32 tim[5];             /* set by rfbi_convert_timings() */
++
++	int converted;
++};
++
++void omap_rfbi_write_command(const void *buf, u32 len);
++void omap_rfbi_read_data(void *buf, u32 len);
++void omap_rfbi_write_data(const void *buf, u32 len);
++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
++		u16 x, u16 y,
++		u16 w, u16 h);
++int omap_rfbi_enable_te(bool enable, unsigned line);
++int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
++			     unsigned hs_pulse_time, unsigned vs_pulse_time,
++			     int hs_pol_inv, int vs_pol_inv, int extif_div);
++
++/* DSI */
++int dsi_vc_dcs_write(int channel, u8 *data, int len);
++int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
++int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
++int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
++int dsi_vc_send_null(int channel);
++
++/* Board specific data */
++struct omap_dss_display_config {
++	enum omap_display_type type;
++
++	union {
++		struct {
++			u8 data_lines;
++		} dpi;
++
++		struct {
++			u8 channel;
++			u8 data_lines;
++		} rfbi;
++
++		struct {
++			u8 datapairs;
++		} sdi;
++
++		struct {
++			u8 clk_lane;
++			u8 clk_pol;
++			u8 data1_lane;
++			u8 data1_pol;
++			u8 data2_lane;
++			u8 data2_pol;
++			unsigned long ddr_clk_hz;
++		} dsi;
++
++		struct {
++			enum omap_dss_venc_type type;
++		} venc;
++	} u;
++
++	int panel_reset_gpio;
++	int ctrl_reset_gpio;
++
++	const char *name;		/* for debug */
++	const char *ctrl_name;
++	const char *panel_name;
++
++	void *panel_data;
++	void *ctrl_data;
++
++	/* platform specific enable/disable */
++	int (*panel_enable)(struct omap_display *display);
++	void (*panel_disable)(struct omap_display *display);
++	int (*ctrl_enable)(struct omap_display *display);
++	void (*ctrl_disable)(struct omap_display *display);
++	int (*set_backlight)(struct omap_display *display,
++			int level);
++};
++
++struct device;
++
++/* Board specific data */
++struct  omap_dss_board_info {
++	unsigned (*get_last_off_on_transaction_id)(struct device *dev);
++	int (*dsi_power_up)(void);
++	void (*dsi_power_down)(void);
++	int num_displays;
++	struct omap_dss_display_config *displays[];
++};
++
++struct omap_ctrl {
++	struct module *owner;
++
++	const char *name;
++
++	int (*init)(struct omap_display *display);
++	void (*cleanup)(struct omap_display *display);
++	int (*enable)(struct omap_display *display);
++	void (*disable)(struct omap_display *display);
++	int (*suspend)(struct omap_display *display);
++	int (*resume)(struct omap_display *display);
++	void (*setup_update)(struct omap_display *display,
++			     u16 x, u16 y, u16 w, u16 h);
++
++	int (*enable_te)(struct omap_display *display, bool enable);
++
++	u8 (*get_rotate)(struct omap_display *display);
++	int (*set_rotate)(struct omap_display *display, u8 rotate);
++
++	bool (*get_mirror)(struct omap_display *display);
++	int (*set_mirror)(struct omap_display *display, bool enable);
++
++	int (*run_test)(struct omap_display *display, int test);
++	int (*memory_read)(struct omap_display *display,
++			void *buf, size_t size,
++			u16 x, u16 y, u16 w, u16 h);
++
++	u8 pixel_size;
++
++	struct rfbi_timings timings;
++
++	void *priv;
++};
++
++struct omap_video_timings {
++	/* Unit: pixels */
++	u16 x_res;
++	/* Unit: pixels */
++	u16 y_res;
++	/* Unit: KHz */
++	u32 pixel_clock;
++	/* Unit: pixel clocks */
++	u16 hsw;	/* Horizontal synchronization pulse width */
++	/* Unit: pixel clocks */
++	u16 hfp;	/* Horizontal front porch */
++	/* Unit: pixel clocks */
++	u16 hbp;	/* Horizontal back porch */
++	/* Unit: line clocks */
++	u16 vsw;	/* Vertical synchronization pulse width */
++	/* Unit: line clocks */
++	u16 vfp;	/* Vertical front porch */
++	/* Unit: line clocks */
++	u16 vbp;	/* Vertical back porch */
++
++};
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++/* Hardcoded timings for tv modes. Venc only uses these to
++ * identify the mode, and does not actually use the configs
++ * itself. However, the configs should be something that
++ * a normal monitor can also show */
++const extern struct omap_video_timings omap_dss_pal_timings;
++const extern struct omap_video_timings omap_dss_ntsc_timings;
++#endif
++
++struct omap_panel {
++	struct module *owner;
++
++	const char *name;
++
++	int (*init)(struct omap_display *display);
++	void (*cleanup)(struct omap_display *display);
++	int (*remove)(struct omap_display *display);
++	int (*enable)(struct omap_display *display);
++	void (*disable)(struct omap_display *display);
++	int (*suspend)(struct omap_display *display);
++	int (*resume)(struct omap_display *display);
++	int (*run_test)(struct omap_display *display, int test);
++
++	struct omap_video_timings timings;
++
++	int acbi;	/* ac-bias pin transitions per interrupt */
++	/* Unit: line clocks */
++	int acb;	/* ac-bias pin frequency */
++
++	enum omap_panel_config config;
++
++	u8 recommended_bpp;
++
++	void *priv;
++};
++
++/* XXX perhaps this should be removed */
++enum omap_dss_overlay_managers {
++	OMAP_DSS_OVL_MGR_LCD,
++	OMAP_DSS_OVL_MGR_TV,
++};
++
++struct omap_overlay_manager;
++
++struct omap_overlay_info {
++	bool enabled;
++
++	u32 paddr;
++	void __iomem *vaddr;
++	u16 screen_width;
++	u16 width;
++	u16 height;
++	enum omap_color_mode color_mode;
++	u8 rotation;
++	bool mirror;
++
++	u16 pos_x;
++	u16 pos_y;
++	u16 out_width;	/* if 0, out_width == width */
++	u16 out_height;	/* if 0, out_height == height */
++};
++
++enum omap_overlay_caps {
++	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
++	OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
++};
++
++struct omap_overlay {
++	struct kobject kobj;
++	struct list_head list;
++
++	const char *name;
++	int id;
++	struct omap_overlay_manager *manager;
++	enum omap_color_mode supported_modes;
++	struct omap_overlay_info info;
++	enum omap_overlay_caps caps;
++
++	int (*set_manager)(struct omap_overlay *ovl,
++		struct omap_overlay_manager *mgr);
++	int (*unset_manager)(struct omap_overlay *ovl);
++
++	int (*set_overlay_info)(struct omap_overlay *ovl,
++			struct omap_overlay_info *info);
++	void (*get_overlay_info)(struct omap_overlay *ovl,
++			struct omap_overlay_info *info);
++};
++
++enum omap_overlay_manager_caps {
++	OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
++};
++
++struct omap_overlay_manager {
++	struct kobject kobj;
++	struct list_head list;
++
++	const char *name;
++	int id;
++	enum omap_overlay_manager_caps caps;
++	struct omap_display *display;
++	int num_overlays;
++	struct omap_overlay **overlays;
++	enum omap_display_type supported_displays;
++
++	int (*set_display)(struct omap_overlay_manager *mgr,
++		struct omap_display *display);
++	int (*unset_display)(struct omap_overlay_manager *mgr);
++
++	int (*apply)(struct omap_overlay_manager *mgr);
++
++	void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color);
++	void (*set_trans_key)(struct omap_overlay_manager *mgr,
++		enum omap_dss_color_key_type type,
++		u32 trans_key);
++	void (*enable_trans_key)(struct omap_overlay_manager *mgr,
++		bool enable);
++};
++
++enum omap_display_caps {
++	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0,
++};
++
++enum omap_dss_update_mode {
++	OMAP_DSS_UPDATE_DISABLED = 0,
++	OMAP_DSS_UPDATE_AUTO,
++	OMAP_DSS_UPDATE_MANUAL,
++};
++
++enum omap_dss_display_state {
++	OMAP_DSS_DISPLAY_DISABLED = 0,
++	OMAP_DSS_DISPLAY_ACTIVE,
++	OMAP_DSS_DISPLAY_SUSPENDED,
++};
++
++struct omap_display {
++	struct kobject kobj;
++	struct list_head list;
++
++	/*atomic_t ref_count;*/
++	int ref_count;
++	/* helper variable for driver suspend/resume */
++	int activate_after_resume;
++
++	enum omap_display_type type;
++	const char *name;
++
++	enum omap_display_caps caps;
++
++	struct omap_overlay_manager *manager;
++
++	enum omap_dss_display_state state;
++
++	struct omap_dss_display_config hw_config; /* board specific data */
++	struct omap_ctrl *ctrl;			/* static common data */
++	struct omap_panel *panel;		/* static common data */
++
++	int (*enable)(struct omap_display *display);
++	void (*disable)(struct omap_display *display);
++
++	int (*suspend)(struct omap_display *display);
++	int (*resume)(struct omap_display *display);
++
++	void (*get_resolution)(struct omap_display *display,
++			u16 *xres, u16 *yres);
++	int (*get_recommended_bpp)(struct omap_display *display);
++
++	int (*check_timings)(struct omap_display *display,
++			struct omap_video_timings *timings);
++	void (*set_timings)(struct omap_display *display,
++			struct omap_video_timings *timings);
++	void (*get_timings)(struct omap_display *display,
++			struct omap_video_timings *timings);
++	int (*update)(struct omap_display *display,
++			       u16 x, u16 y, u16 w, u16 h);
++	int (*sync)(struct omap_display *display);
++	int (*wait_vsync)(struct omap_display *display);
++
++	int (*set_update_mode)(struct omap_display *display,
++			enum omap_dss_update_mode);
++	enum omap_dss_update_mode (*get_update_mode)
++		(struct omap_display *display);
++
++	int (*enable_te)(struct omap_display *display, bool enable);
++	int (*get_te)(struct omap_display *display);
++
++	u8 (*get_rotate)(struct omap_display *display);
++	int (*set_rotate)(struct omap_display *display, u8 rotate);
++
++	bool (*get_mirror)(struct omap_display *display);
++	int (*set_mirror)(struct omap_display *display, bool enable);
++
++	int (*run_test)(struct omap_display *display, int test);
++	int (*memory_read)(struct omap_display *display,
++			void *buf, size_t size,
++			u16 x, u16 y, u16 w, u16 h);
++
++	void (*configure_overlay)(struct omap_overlay *overlay);
++};
++
++int omap_dss_get_num_displays(void);
++struct omap_display *omap_dss_get_display(int no);
++void omap_dss_put_display(struct omap_display *display);
++
++void omap_dss_register_ctrl(struct omap_ctrl *ctrl);
++void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl);
++
++void omap_dss_register_panel(struct omap_panel *panel);
++void omap_dss_unregister_panel(struct omap_panel *panel);
++
++int omap_dss_get_num_overlay_managers(void);
++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
++
++int omap_dss_get_num_overlays(void);
++struct omap_overlay *omap_dss_get_overlay(int num);
++
++typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
++int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
++
++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
++		unsigned long timeout);
++
++#endif
+diff --git a/arch/arm/plat-omap/include/mach/vram.h b/arch/arm/plat-omap/include/mach/vram.h
+new file mode 100644
+index 0000000..f176562
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/vram.h
+@@ -0,0 +1,33 @@
++/*
++ * File: arch/arm/plat-omap/include/mach/vram.h
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++#ifndef __OMAPVRAM_H
++#define __OMAPVRAM_H
++
++#include <asm/types.h>
++
++extern int omap_vram_free(unsigned long paddr, size_t size);
++extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
++extern int omap_vram_reserve(unsigned long paddr, size_t size);
++extern void omap2_set_sdram_vram(u32 size, u32 start);
++extern void omap2_set_sram_vram(u32 size, u32 start);
++
++#endif
+diff --git a/arch/arm/plat-omap/include/mach/vrfb.h b/arch/arm/plat-omap/include/mach/vrfb.h
+new file mode 100644
+index 0000000..2047862
+--- /dev/null
++++ b/arch/arm/plat-omap/include/mach/vrfb.h
+@@ -0,0 +1,47 @@
++/*
++ * File: arch/arm/plat-omap/include/mach/vrfb.h
++ *
++ * VRFB
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++#ifndef __VRFB_H
++#define __VRFB_H
++
++#define OMAP_VRFB_LINE_LEN 2048
++
++struct vrfb
++{
++	u8 context;
++	void __iomem *vaddr[4];
++	unsigned long paddr[4];
++	u16 xoffset;
++	u16 yoffset;
++	u8 bytespp;
++};
++
++extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
++extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
++extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
++		u8 bytespp);
++extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
++		u16 width, u16 height,
++		u8 bytespp);
++
++#endif /* __VRFB_H */
+diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c
+new file mode 100644
+index 0000000..f24a110
+--- /dev/null
++++ b/arch/arm/plat-omap/vram.c
+@@ -0,0 +1,615 @@
++/*
++ * linux/arch/arm/plat-omap/vram.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++/*#define DEBUG*/
++
++#include <linux/vmalloc.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/list.h>
++#include <linux/dma-mapping.h>
++#include <linux/proc_fs.h>
++#include <linux/seq_file.h>
++#include <linux/bootmem.h>
++#include <linux/omapfb.h>
++
++#include <asm/setup.h>
++
++#include <mach/sram.h>
++#include <mach/vram.h>
++
++#ifdef DEBUG
++#define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define OMAP2_SRAM_START		0x40200000
++/* Maximum size, in reality this is smaller if SRAM is partially locked. */
++#define OMAP2_SRAM_SIZE			0xa0000		/* 640k */
++
++#define REG_MAP_SIZE(_page_cnt) \
++	((_page_cnt + (sizeof(unsigned long) * 8) - 1) / 8)
++#define REG_MAP_PTR(_rg, _page_nr) \
++	(((_rg)->map) + (_page_nr) / (sizeof(unsigned long) * 8))
++#define REG_MAP_MASK(_page_nr) \
++	(1 << ((_page_nr) & (sizeof(unsigned long) * 8 - 1)))
++
++#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
++
++/* postponed regions are used to temporarily store region information at boot
++ * time when we cannot yet allocate the region list */
++#define MAX_POSTPONED_REGIONS 10
++
++static int postponed_cnt __initdata;
++static struct {
++	unsigned long paddr;
++	size_t size;
++} postponed_regions[MAX_POSTPONED_REGIONS] __initdata;
++
++struct vram_alloc {
++	struct list_head list;
++	unsigned long paddr;
++	unsigned pages;
++};
++
++struct vram_region {
++	struct list_head list;
++	struct list_head alloc_list;
++	unsigned long paddr;
++	unsigned pages;
++};
++
++static DEFINE_MUTEX(region_mutex);
++static LIST_HEAD(region_list);
++
++static inline int region_mem_type(unsigned long paddr)
++{
++	if (paddr >= OMAP2_SRAM_START &&
++	    paddr < OMAP2_SRAM_START + OMAP2_SRAM_SIZE)
++		return OMAPFB_MEMTYPE_SRAM;
++	else
++		return OMAPFB_MEMTYPE_SDRAM;
++}
++
++static struct vram_region *omap_vram_create_region(unsigned long paddr,
++		unsigned pages)
++{
++	struct vram_region *rm;
++
++	rm = kzalloc(sizeof(*rm), GFP_KERNEL);
++
++	if (rm) {
++		INIT_LIST_HEAD(&rm->alloc_list);
++		rm->paddr = paddr;
++		rm->pages = pages;
++	}
++
++	return rm;
++}
++
++#if 0
++static void omap_vram_free_region(struct vram_region *vr)
++{
++	list_del(&vr->list);
++	kfree(vr);
++}
++#endif
++
++static struct vram_alloc *omap_vram_create_allocation(struct vram_region *vr,
++		unsigned long paddr, unsigned pages)
++{
++	struct vram_alloc *va;
++	struct vram_alloc *new;
++
++	new = kzalloc(sizeof(*va), GFP_KERNEL);
++
++	if (!new)
++		return NULL;
++
++	new->paddr = paddr;
++	new->pages = pages;
++
++	list_for_each_entry(va, &vr->alloc_list, list) {
++		if (va->paddr > new->paddr)
++			break;
++	}
++
++	list_add_tail(&new->list, &va->list);
++
++	return new;
++}
++
++static void omap_vram_free_allocation(struct vram_alloc *va)
++{
++	list_del(&va->list);
++	kfree(va);
++}
++
++static __init int omap_vram_add_region_postponed(unsigned long paddr,
++		size_t size)
++{
++	if (postponed_cnt == MAX_POSTPONED_REGIONS)
++		return -ENOMEM;
++
++	postponed_regions[postponed_cnt].paddr = paddr;
++	postponed_regions[postponed_cnt].size = size;
++
++	++postponed_cnt;
++
++	return 0;
++}
++
++/* add/remove_region can be exported if there's need to add/remove regions
++ * runtime */
++static int omap_vram_add_region(unsigned long paddr, size_t size)
++{
++	struct vram_region *rm;
++	unsigned pages;
++
++	DBG("adding region paddr %08lx size %d\n",
++			paddr, size);
++
++	size &= PAGE_MASK;
++	pages = size >> PAGE_SHIFT;
++
++	rm = omap_vram_create_region(paddr, pages);
++	if (rm == NULL)
++		return -ENOMEM;
++
++	list_add(&rm->list, &region_list);
++
++	return 0;
++}
++
++int omap_vram_free(unsigned long paddr, size_t size)
++{
++	struct vram_region *rm;
++	struct vram_alloc *alloc;
++	unsigned start, end;
++
++	DBG("free mem paddr %08lx size %d\n", paddr, size);
++
++	size = PAGE_ALIGN(size);
++
++	mutex_lock(&region_mutex);
++
++	list_for_each_entry(rm, &region_list, list) {
++		list_for_each_entry(alloc, &rm->alloc_list, list) {
++			start = alloc->paddr;
++			end = alloc->paddr + (alloc->pages >> PAGE_SHIFT);
++
++			if (start >= paddr && end < paddr + size)
++				goto found;
++		}
++	}
++
++	mutex_unlock(&region_mutex);
++	return -EINVAL;
++
++found:
++	omap_vram_free_allocation(alloc);
++
++	mutex_unlock(&region_mutex);
++	return 0;
++}
++EXPORT_SYMBOL(omap_vram_free);
++
++static int _omap_vram_reserve(unsigned long paddr, unsigned pages)
++{
++	struct vram_region *rm;
++	struct vram_alloc *alloc;
++	size_t size;
++
++	size = pages << PAGE_SHIFT;
++
++	list_for_each_entry(rm, &region_list, list) {
++		unsigned long start, end;
++
++		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
++
++		if (region_mem_type(rm->paddr) != region_mem_type(paddr))
++			continue;
++
++		start = rm->paddr;
++		end = start + (rm->pages << PAGE_SHIFT) - 1;
++		if (start > paddr || end < paddr + size - 1)
++			continue;
++
++		DBG("block ok, checking allocs\n");
++
++		list_for_each_entry(alloc, &rm->alloc_list, list) {
++			end = alloc->paddr - 1;
++
++			if (start <= paddr && end >= paddr + size - 1)
++				goto found;
++
++			start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
++		}
++
++		end = rm->paddr + (rm->pages << PAGE_SHIFT) - 1;
++
++		if (!(start <= paddr && end >= paddr + size - 1))
++			continue;
++found:
++		DBG("FOUND area start %lx, end %lx\n", start, end);
++
++		if (omap_vram_create_allocation(rm, paddr, pages) == NULL)
++			return -ENOMEM;
++
++		return 0;
++	}
++
++	return -ENOMEM;
++}
++
++int omap_vram_reserve(unsigned long paddr, size_t size)
++{
++	unsigned pages;
++	int r;
++
++	DBG("reserve mem paddr %08lx size %d\n", paddr, size);
++
++	size = PAGE_ALIGN(size);
++	pages = size >> PAGE_SHIFT;
++
++	mutex_lock(&region_mutex);
++
++	r = _omap_vram_reserve(paddr, pages);
++
++	mutex_unlock(&region_mutex);
++
++	return r;
++}
++EXPORT_SYMBOL(omap_vram_reserve);
++
++static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
++{
++	struct vram_region *rm;
++	struct vram_alloc *alloc;
++
++	list_for_each_entry(rm, &region_list, list) {
++		unsigned long start, end;
++
++		DBG("checking region %lx %d\n", rm->paddr, rm->pages);
++
++		if (region_mem_type(rm->paddr) != mtype)
++			continue;
++
++		start = rm->paddr;
++
++		list_for_each_entry(alloc, &rm->alloc_list, list) {
++			end = alloc->paddr;
++
++			if (end - start >= pages << PAGE_SHIFT)
++				goto found;
++
++			start = alloc->paddr + (alloc->pages << PAGE_SHIFT);
++		}
++
++		end = rm->paddr + (rm->pages << PAGE_SHIFT);
++found:
++		if (end - start < pages << PAGE_SHIFT)
++			continue;
++
++		DBG("FOUND %lx, end %lx\n", start, end);
++
++		alloc = omap_vram_create_allocation(rm, start, pages);
++		if (alloc == NULL)
++			return -ENOMEM;
++
++		*paddr = start;
++
++		return 0;
++	}
++
++	return -ENOMEM;
++}
++
++int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
++{
++	unsigned pages;
++	int r;
++
++	BUG_ON(mtype > OMAPFB_MEMTYPE_MAX || !size);
++
++	DBG("alloc mem type %d size %d\n", mtype, size);
++
++	size = PAGE_ALIGN(size);
++	pages = size >> PAGE_SHIFT;
++
++	mutex_lock(&region_mutex);
++
++	r = _omap_vram_alloc(mtype, pages, paddr);
++
++	mutex_unlock(&region_mutex);
++
++	return r;
++}
++EXPORT_SYMBOL(omap_vram_alloc);
++
++#ifdef CONFIG_PROC_FS
++static void *r_next(struct seq_file *m, void *v, loff_t *pos)
++{
++	struct list_head *l = v;
++
++	(*pos)++;
++
++	if (list_is_last(l, &region_list))
++		return NULL;
++
++	return l->next;
++}
++
++static void *r_start(struct seq_file *m, loff_t *pos)
++{
++	loff_t p = *pos;
++	struct list_head *l = &region_list;
++
++	mutex_lock(&region_mutex);
++
++	do {
++		l = l->next;
++		if (l == &region_list)
++			return NULL;
++	} while (p--);
++
++	return l;
++}
++
++static void r_stop(struct seq_file *m, void *v)
++{
++	mutex_unlock(&region_mutex);
++}
++
++static int r_show(struct seq_file *m, void *v)
++{
++	struct vram_region *vr;
++	struct vram_alloc *va;
++	unsigned size;
++
++	vr = list_entry(v, struct vram_region, list);
++
++	size = vr->pages << PAGE_SHIFT;
++
++	seq_printf(m, "%08lx-%08lx (%d bytes)\n",
++			vr->paddr, vr->paddr + size - 1,
++			size);
++
++	list_for_each_entry(va, &vr->alloc_list, list) {
++		size = va->pages << PAGE_SHIFT;
++		seq_printf(m, "    %08lx-%08lx (%d bytes)\n",
++				va->paddr, va->paddr + size - 1,
++				size);
++	}
++
++
++
++	return 0;
++}
++
++static const struct seq_operations resource_op = {
++	.start	= r_start,
++	.next	= r_next,
++	.stop	= r_stop,
++	.show	= r_show,
++};
++
++static int vram_open(struct inode *inode, struct file *file)
++{
++	return seq_open(file, &resource_op);
++}
++
++static const struct file_operations proc_vram_operations = {
++	.open		= vram_open,
++	.read		= seq_read,
++	.llseek		= seq_lseek,
++	.release	= seq_release,
++};
++
++static int __init omap_vram_create_proc(void)
++{
++	proc_create("omap-vram", 0, NULL, &proc_vram_operations);
++
++	return 0;
++}
++#endif
++
++static __init int omap_vram_init(void)
++{
++	int i, r;
++
++	for (i = 0; i < postponed_cnt; i++)
++		omap_vram_add_region(postponed_regions[i].paddr,
++				postponed_regions[i].size);
++
++#ifdef CONFIG_PROC_FS
++	r = omap_vram_create_proc();
++	if (r)
++		return -ENOMEM;
++#endif
++
++	return 0;
++}
++
++arch_initcall(omap_vram_init);
++
++/* boottime vram alloc stuff */
++
++/* set from board file */
++static u32 omapfb_sram_vram_start __initdata;
++static u32 omapfb_sram_vram_size __initdata;
++
++/* set from board file */
++static u32 omapfb_sdram_vram_start __initdata;
++static u32 omapfb_sdram_vram_size __initdata;
++
++/* set from kernel cmdline */
++static u32 omapfb_def_sdram_vram_size __initdata;
++static u32 omapfb_def_sdram_vram_start __initdata;
++
++static void __init omapfb_early_vram(char **p)
++{
++	omapfb_def_sdram_vram_size = memparse(*p, p);
++	if (**p == ',')
++		omapfb_def_sdram_vram_start = simple_strtoul((*p) + 1, p, 16);
++
++	printk("omapfb_early_vram, %d, 0x%x\n",
++			omapfb_def_sdram_vram_size,
++			omapfb_def_sdram_vram_start);
++}
++__early_param("vram=", omapfb_early_vram);
++
++/*
++ * Called from map_io. We need to call to this early enough so that we
++ * can reserve the fixed SDRAM regions before VM could get hold of them.
++ */
++void __init omapfb_reserve_sdram(void)
++{
++	struct bootmem_data	*bdata;
++	unsigned long		sdram_start, sdram_size;
++	u32 paddr;
++	u32 size = 0;
++
++	/* cmdline arg overrides the board file definition */
++	if (omapfb_def_sdram_vram_size) {
++		size = omapfb_def_sdram_vram_size;
++		paddr = omapfb_def_sdram_vram_start;
++	}
++
++	if (!size) {
++		size = omapfb_sdram_vram_size;
++		paddr = omapfb_sdram_vram_start;
++	}
++
++#ifdef CONFIG_OMAP2_DSS_VRAM_SIZE
++	if (!size) {
++		size = CONFIG_OMAP2_DSS_VRAM_SIZE * 1024 * 1024;
++		paddr = 0;
++	}
++#endif
++
++	if (!size)
++		return;
++
++	size = PAGE_ALIGN(size);
++
++	bdata = NODE_DATA(0)->bdata;
++	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
++	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
++
++	if (paddr) {
++		if ((paddr & ~PAGE_MASK) || paddr < sdram_start ||
++				paddr + size > sdram_start + sdram_size) {
++			printk(KERN_ERR "Illegal SDRAM region for VRAM\n");
++			return;
++		}
++
++		reserve_bootmem(paddr, size, BOOTMEM_DEFAULT);
++	} else {
++		if (size > sdram_size) {
++			printk(KERN_ERR "Illegal SDRAM size for VRAM\n");
++			return;
++		}
++
++		paddr = virt_to_phys(alloc_bootmem_pages(size));
++		BUG_ON(paddr & ~PAGE_MASK);
++	}
++
++	omap_vram_add_region_postponed(paddr, size);
++
++	pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
++}
++
++/*
++ * Called at sram init time, before anything is pushed to the SRAM stack.
++ * Because of the stack scheme, we will allocate everything from the
++ * start of the lowest address region to the end of SRAM. This will also
++ * include padding for page alignment and possible holes between regions.
++ *
++ * As opposed to the SDRAM case, we'll also do any dynamic allocations at
++ * this point, since the driver built as a module would have problem with
++ * freeing / reallocating the regions.
++ */
++unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
++				  unsigned long sram_vstart,
++				  unsigned long sram_size,
++				  unsigned long pstart_avail,
++				  unsigned long size_avail)
++{
++	unsigned long			pend_avail;
++	unsigned long			reserved;
++	u32 paddr;
++	u32 size;
++
++	paddr = omapfb_sram_vram_start;
++	size = omapfb_sram_vram_size;
++
++	if (!size)
++		return 0;
++
++	reserved = 0;
++	pend_avail = pstart_avail + size_avail;
++
++	if (!paddr) {
++		/* Dynamic allocation */
++		if ((size_avail & PAGE_MASK) < size) {
++			printk(KERN_ERR "Not enough SRAM for VRAM\n");
++			return 0;
++		}
++		size_avail = (size_avail - size) & PAGE_MASK;
++		paddr = pstart_avail + size_avail;
++	}
++
++	if (paddr < sram_pstart ||
++			paddr + size > sram_pstart + sram_size) {
++		printk(KERN_ERR "Illegal SRAM region for VRAM\n");
++		return 0;
++	}
++
++	/* Reserve everything above the start of the region. */
++	if (pend_avail - paddr > reserved)
++		reserved = pend_avail - paddr;
++	size_avail = pend_avail - reserved - pstart_avail;
++
++	omap_vram_add_region_postponed(paddr, size);
 +
- endmenu
++	if (reserved)
++		pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
++
++	return reserved;
++}
++
++void __init omap2_set_sdram_vram(u32 size, u32 start)
++{
++	omapfb_sdram_vram_start = start;
++	omapfb_sdram_vram_size = size;
++}
++
++void __init omap2_set_sram_vram(u32 size, u32 start)
++{
++	omapfb_sram_vram_start = start;
++	omapfb_sram_vram_size = size;
++}
++
++#endif
++
+diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c
+new file mode 100644
+index 0000000..7e0f8fc
+--- /dev/null
++++ b/arch/arm/plat-omap/vrfb.c
+@@ -0,0 +1,159 @@
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <asm/io.h>
++
++#include <mach/io.h>
++#include <mach/vrfb.h>
++
++/*#define DEBUG*/
++
++#ifdef DEBUG
++#define DBG(format, ...) printk(KERN_DEBUG "VRFB: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define SMS_ROT_VIRT_BASE(context, rot) \
++	(((context >= 4) ? 0xD0000000 : 0x70000000) \
++	 | 0x4000000 * (context) \
++	 | 0x1000000 * (rot))
++
++#define OMAP_VRFB_SIZE			(2048 * 2048 * 4)
++
++#define VRFB_PAGE_WIDTH_EXP	5 /* Assuming SDRAM pagesize= 1024 */
++#define VRFB_PAGE_HEIGHT_EXP	5 /* 1024 = 2^5 * 2^5 */
++#define VRFB_PAGE_WIDTH		(1 << VRFB_PAGE_WIDTH_EXP)
++#define VRFB_PAGE_HEIGHT	(1 << VRFB_PAGE_HEIGHT_EXP)
++#define SMS_IMAGEHEIGHT_OFFSET	16
++#define SMS_IMAGEWIDTH_OFFSET	0
++#define SMS_PH_OFFSET		8
++#define SMS_PW_OFFSET		4
++#define SMS_PS_OFFSET		0
++
++#define OMAP_SMS_BASE		0x6C000000
++#define SMS_ROT_CONTROL(context)	(OMAP_SMS_BASE + 0x180 + 0x10 * context)
++#define SMS_ROT_SIZE(context)		(OMAP_SMS_BASE + 0x184 + 0x10 * context)
++#define SMS_ROT_PHYSICAL_BA(context)	(OMAP_SMS_BASE + 0x188 + 0x10 * context)
++
++#define VRFB_NUM_CTXS 12
++/* bitmap of reserved contexts */
++static unsigned ctx_map;
++
++void omap_vrfb_adjust_size(u16 *width, u16 *height,
++		u8 bytespp)
++{
++	*width = ALIGN(*width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
++	*height = ALIGN(*height, VRFB_PAGE_HEIGHT);
++}
++EXPORT_SYMBOL(omap_vrfb_adjust_size);
++
++void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
++		u16 width, u16 height,
++		u8 bytespp)
++{
++	unsigned pixel_size_exp;
++	u16 vrfb_width;
++	u16 vrfb_height;
++	u8 ctx = vrfb->context;
++
++	DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr,
++			width, height, bytespp);
++
++	if (bytespp == 4)
++		pixel_size_exp = 2;
++	else if (bytespp == 2)
++		pixel_size_exp = 1;
++	else
++		BUG();
++
++	vrfb_width = ALIGN(width * bytespp, VRFB_PAGE_WIDTH) / bytespp;
++	vrfb_height = ALIGN(height, VRFB_PAGE_HEIGHT);
++
++	DBG("vrfb w %u, h %u\n", vrfb_width, vrfb_height);
++
++	omap_writel(paddr, SMS_ROT_PHYSICAL_BA(ctx));
++	omap_writel((vrfb_width << SMS_IMAGEWIDTH_OFFSET) |
++			(vrfb_height << SMS_IMAGEHEIGHT_OFFSET),
++			SMS_ROT_SIZE(ctx));
++
++	omap_writel(pixel_size_exp << SMS_PS_OFFSET |
++			VRFB_PAGE_WIDTH_EXP  << SMS_PW_OFFSET |
++			VRFB_PAGE_HEIGHT_EXP << SMS_PH_OFFSET,
++			SMS_ROT_CONTROL(ctx));
++
++	DBG("vrfb offset pixels %d, %d\n",
++			vrfb_width - width, vrfb_height - height);
++
++	vrfb->xoffset = vrfb_width - width;
++	vrfb->yoffset = vrfb_height - height;
++	vrfb->bytespp = bytespp;
++}
++EXPORT_SYMBOL(omap_vrfb_setup);
++
++void omap_vrfb_release_ctx(struct vrfb *vrfb)
++{
++	int rot;
++
++	if (vrfb->context == 0xff)
++		return;
++
++	DBG("release ctx %d\n", vrfb->context);
++
++	ctx_map &= ~(1 << vrfb->context);
++
++	for (rot = 0; rot < 4; ++rot) {
++		if(vrfb->paddr[rot]) {
++			release_mem_region(vrfb->paddr[rot], OMAP_VRFB_SIZE);
++			vrfb->paddr[rot] = 0;
++		}
++	}
++
++	vrfb->context = 0xff;
++}
++EXPORT_SYMBOL(omap_vrfb_release_ctx);
++
++int omap_vrfb_request_ctx(struct vrfb *vrfb)
++{
++	int rot;
++	u32 paddr;
++	u8 ctx;
++
++	DBG("request ctx\n");
++
++	for (ctx = 0; ctx < VRFB_NUM_CTXS; ++ctx)
++		if ((ctx_map & (1 << ctx)) == 0)
++			break;
++
++	if (ctx == VRFB_NUM_CTXS) {
++		printk(KERN_ERR "vrfb: no free contexts\n");
++		return -EBUSY;
++	}
++
++	DBG("found free ctx %d\n", ctx);
++
++	ctx_map |= 1 << ctx;
++
++	memset(vrfb, 0, sizeof(*vrfb));
++
++	vrfb->context = ctx;
++
++	for (rot = 0; rot < 4; ++rot) {
++		paddr = SMS_ROT_VIRT_BASE(ctx, rot);
++		if (!request_mem_region(paddr, OMAP_VRFB_SIZE, "vrfb")) {
++			printk(KERN_ERR "vrfb: failed to reserve VRFB "
++					"area for ctx %d, rotation %d\n",
++					ctx, rot * 90);
++			omap_vrfb_release_ctx(vrfb);
++			return -ENOMEM;
++		}
++
++		vrfb->paddr[rot] = paddr;
++
++		DBG("VRFB %d/%d: %lx\n", ctx, rot*90, vrfb->paddr[rot]);
++	}
++
++	return 0;
++}
++EXPORT_SYMBOL(omap_vrfb_request_ctx);
++
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index fb19803..8b3752b 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -2132,6 +2132,7 @@ config FB_MX3
+          an LCD display with your i.MX31 system, say Y here.
  
- endif
-diff --git a/arch/arm/plat-omap/dss/Kconfig b/arch/arm/plat-omap/dss/Kconfig
+ source "drivers/video/omap/Kconfig"
++source "drivers/video/omap2/Kconfig"
+ 
+ source "drivers/video/backlight/Kconfig"
+ source "drivers/video/display/Kconfig"
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index 2a998ca..1db8dd4 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -120,6 +120,7 @@ obj-$(CONFIG_FB_SM501)            += sm501fb.o
+ obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+ obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
+ obj-$(CONFIG_FB_OMAP)             += omap/
++obj-$(CONFIG_OMAP2_DSS)           += omap2/
+ obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
+ obj-$(CONFIG_FB_CARMINE)          += carminefb.o
+ obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
+diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
+new file mode 100644
+index 0000000..89bf210
+--- /dev/null
++++ b/drivers/video/omap2/Kconfig
+@@ -0,0 +1,3 @@
++source "drivers/video/omap2/dss/Kconfig"
++source "drivers/video/omap2/displays/Kconfig"
++source "drivers/video/omap2/omapfb/Kconfig"
+diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
 new file mode 100644
-index 0000000..6b342df
+index 0000000..72134db
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/Kconfig
-@@ -0,0 +1,69 @@
-+config OMAP2_DSS
++++ b/drivers/video/omap2/Makefile
+@@ -0,0 +1,4 @@
++# OMAP2/3 Display Subsystem
++obj-y += dss/
++obj-y += displays/
++obj-y += omapfb/
+diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/omap2/dss/Kconfig
+new file mode 100644
+index 0000000..f2ce068
+--- /dev/null
++++ b/drivers/video/omap2/dss/Kconfig
+@@ -0,0 +1,89 @@
++menuconfig OMAP2_DSS
 +        tristate "OMAP2/3 Display Subsystem support (EXPERIMENTAL)"
 +        depends on ARCH_OMAP2 || ARCH_OMAP3
 +        help
@@ -334,6 +1845,18 @@ index 0000000..6b342df
 +
 +if OMAP2_DSS
 +
++config OMAP2_DSS_VRAM_SIZE
++	int "VRAM size (MB)"
++	range 0 32
++	default 4
++	help
++	  The amount of SDRAM to reserve at boot time for video RAM use.
++	  This VRAM will be used by omapfb and other drivers that need
++	  large continuous RAM area for video use.
++
++	  You can also set this with "vram=<bytes>" kernel argument, or
++	  in the board file.
++
 +config OMAP2_DSS_DEBUG_SUPPORT
 +        bool "Debug support"
 +	default y
@@ -343,38 +1866,46 @@ index 0000000..6b342df
 +
 +config OMAP2_DSS_RFBI
 +	bool "RFBI support"
-+        default y
++        default n
++	help
++	  MIPI DBI, or RFBI (Remote Framebuffer Interface), support.
 +
 +config OMAP2_DSS_VENC
 +	bool "VENC support"
 +        default y
-+
-+if ARCH_OMAP3
++	help
++	  OMAP Video Encoder support.
 +
 +config OMAP2_DSS_SDI
 +	bool "SDI support"
-+        default y
++	depends on ARCH_OMAP3
++        default n
++	help
++	  SDI (Serial Display Interface) support.
 +
 +config OMAP2_DSS_DSI
 +	bool "DSI support"
-+        default y
-+
-+endif
++	depends on ARCH_OMAP3
++        default n
++	help
++	  MIPI DSI support.
 +
 +config OMAP2_DSS_USE_DSI_PLL
 +	bool "Use DSI PLL for PCLK (EXPERIMENTAL)"
 +	default n
 +	depends on OMAP2_DSS_DSI
 +	help
-+	  Use DSI PLL to generate pixel clock.
-+	  Currently only for DPI output.
++	  Use DSI PLL to generate pixel clock.  Currently only for DPI output.
++	  DSI PLL can be used to generate higher and more precise pixel clocks.
 +
 +config OMAP2_DSS_FAKE_VSYNC
 +	bool "Fake VSYNC irq from manual update displays"
 +	default n
 +	help
-+	  If this is selected, DSI will fake a DISPC VSYNC interrupt
-+	  when DSI has sent a frame.
++	  If this is selected, DSI will generate a fake DISPC VSYNC interrupt
++	  when DSI has sent a frame. This is only needed with DSI or RFBI
++	  displays using manual mode, and you want VSYNC to, for example,
++	  time animation.
 +
 +config OMAP2_DSS_MIN_FCK_PER_PCK
 +	int "Minimum FCK/PCK ratio (for scaling)"
@@ -395,28 +1926,675 @@ index 0000000..6b342df
 +	  is very high.
 +
 +endif
-diff --git a/arch/arm/plat-omap/dss/Makefile b/arch/arm/plat-omap/dss/Makefile
+diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/omap2/dss/Makefile
 new file mode 100644
-index 0000000..e98c6c1
+index 0000000..980c72c
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/Makefile
++++ b/drivers/video/omap2/dss/Makefile
 @@ -0,0 +1,6 @@
-+obj-$(CONFIG_OMAP2_DSS) += omap-dss.o
-+omap-dss-y := dss.o display.o dispc.o dpi.o
-+omap-dss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
-+omap-dss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
-+omap-dss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
-+omap-dss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
-diff --git a/arch/arm/plat-omap/dss/dispc.c b/arch/arm/plat-omap/dss/dispc.c
++obj-$(CONFIG_OMAP2_DSS) += omapdss.o
++omapdss-y := core.o dss.o dispc.o dpi.o display.o manager.o overlay.o
++omapdss-$(CONFIG_OMAP2_DSS_RFBI) += rfbi.o
++omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
++omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
++omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
+diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/omap2/dss/core.c
 new file mode 100644
-index 0000000..20caa48
+index 0000000..ae7cd06
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/dispc.c
-@@ -0,0 +1,2113 @@
++++ b/drivers/video/omap2/dss/core.c
+@@ -0,0 +1,641 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/dispc.c
++ * linux/drivers/video/omap2/dss/core.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "CORE"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <linux/platform_device.h>
++#include <linux/seq_file.h>
++#include <linux/debugfs.h>
++#include <linux/io.h>
++
++#include <mach/display.h>
++#include <mach/clock.h>
++
++#include "dss.h"
++
++static struct {
++	struct platform_device *pdev;
++	unsigned	ctx_id;
++
++	struct clk      *dss_ick;
++	struct clk	*dss1_fck;
++	struct clk	*dss2_fck;
++	struct clk      *dss_54m_fck;
++	struct clk	*dss_96m_fck;
++	unsigned	num_clks_enabled;
++} core;
++
++static void dss_clk_enable_all_no_ctx(void);
++static void dss_clk_disable_all_no_ctx(void);
++static void dss_clk_enable_no_ctx(enum dss_clock clks);
++static void dss_clk_disable_no_ctx(enum dss_clock clks);
++
++static char *def_disp_name;
++module_param_named(def_disp, def_disp_name, charp, 0);
++MODULE_PARM_DESC(def_disp_name, "default display name");
++
++#ifdef DEBUG
++unsigned int dss_debug;
++module_param_named(debug, dss_debug, bool, 0644);
++#endif
++
++/* CONTEXT */
++static unsigned dss_get_ctx_id(void)
++{
++	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
++
++	if (!pdata->get_last_off_on_transaction_id)
++		return 0;
++
++	return pdata->get_last_off_on_transaction_id(&core.pdev->dev);
++}
++
++int dss_need_ctx_restore(void)
++{
++	int id = dss_get_ctx_id();
++
++	if (id != core.ctx_id) {
++		DSSDBG("ctx id %u -> id %u\n",
++				core.ctx_id, id);
++		core.ctx_id = id;
++		return 1;
++	} else {
++		return 0;
++	}
++}
++
++static void save_all_ctx(void)
++{
++	DSSDBG("save context\n");
++
++	dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	dss_save_context();
++	dispc_save_context();
++#ifdef CONFIG_OMAP2_DSS_DSI
++	dsi_save_context();
++#endif
++
++	dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
++}
++
++static void restore_all_ctx(void)
++{
++	DSSDBG("restore context\n");
++
++	dss_clk_enable_all_no_ctx();
++
++	dss_restore_context();
++	dispc_restore_context();
++#ifdef CONFIG_OMAP2_DSS_DSI
++	dsi_restore_context();
++#endif
++
++	dss_clk_disable_all_no_ctx();
++}
++
++/* CLOCKS */
++void dss_dump_clocks(struct seq_file *s)
++{
++	int i;
++	struct clk *clocks[5] = {
++		core.dss_ick,
++		core.dss1_fck,
++		core.dss2_fck,
++		core.dss_54m_fck,
++		core.dss_96m_fck
++	};
++
++	seq_printf(s, "- dss -\n");
++
++	seq_printf(s, "internal clk count\t%u\n", core.num_clks_enabled);
++
++	for (i = 0; i < 5; i++) {
++		if (!clocks[i])
++			continue;
++		seq_printf(s, "%-15s\t%lu\t%d\n",
++				clocks[i]->name,
++				clk_get_rate(clocks[i]),
++				clocks[i]->usecount);
++	}
++}
++
++static int dss_get_clocks(void)
++{
++	const struct {
++		struct clk **clock;
++		char *omap2_name;
++		char *omap3_name;
++	} clocks[5] = {
++		{ &core.dss_ick, "dss_ick", "dss_ick" },	/* L3 & L4 ick */
++		{ &core.dss1_fck, "dss1_fck", "dss1_alwon_fck" },
++		{ &core.dss2_fck, "dss2_fck", "dss2_alwon_fck" },
++		{ &core.dss_54m_fck, "dss_54m_fck", "dss_tv_fck" },
++		{ &core.dss_96m_fck, NULL, "dss_96m_fck" },
++	};
++
++	int r = 0;
++	int i;
++	const int num_clocks = 5;
++
++	for (i = 0; i < num_clocks; i++)
++		*clocks[i].clock = NULL;
++
++	for (i = 0; i < num_clocks; i++) {
++		struct clk *clk;
++		const char *clk_name;
++
++		clk_name = cpu_is_omap34xx() ? clocks[i].omap3_name
++			: clocks[i].omap2_name;
++
++		if (!clk_name)
++			continue;
++
++		clk = clk_get(NULL, clk_name);
++
++		if (IS_ERR(clk)) {
++			DSSERR("can't get clock %s", clk_name);
++			r = PTR_ERR(clk);
++			goto err;
++		}
++
++		DSSDBG("clk %s, rate %ld\n",
++				clk_name, clk_get_rate(clk));
++
++		*clocks[i].clock = clk;
++	}
++
++	return 0;
++
++err:
++	for (i = 0; i < num_clocks; i++) {
++		if (!IS_ERR(*clocks[i].clock))
++			clk_put(*clocks[i].clock);
++	}
++
++	return r;
++}
++
++static void dss_put_clocks(void)
++{
++	if (core.dss_96m_fck)
++		clk_put(core.dss_96m_fck);
++	clk_put(core.dss_54m_fck);
++	clk_put(core.dss1_fck);
++	clk_put(core.dss2_fck);
++	clk_put(core.dss_ick);
++}
++
++unsigned long dss_clk_get_rate(enum dss_clock clk)
++{
++	switch (clk) {
++	case DSS_CLK_ICK:
++		return clk_get_rate(core.dss_ick);
++	case DSS_CLK_FCK1:
++		return clk_get_rate(core.dss1_fck);
++	case DSS_CLK_FCK2:
++		return clk_get_rate(core.dss2_fck);
++	case DSS_CLK_54M:
++		return clk_get_rate(core.dss_54m_fck);
++	case DSS_CLK_96M:
++		return clk_get_rate(core.dss_96m_fck);
++	}
++
++	BUG();
++	return 0;
++}
++
++static unsigned count_clk_bits(enum dss_clock clks)
++{
++	unsigned num_clks = 0;
++
++	if (clks & DSS_CLK_ICK)
++		++num_clks;
++	if (clks & DSS_CLK_FCK1)
++		++num_clks;
++	if (clks & DSS_CLK_FCK2)
++		++num_clks;
++	if (clks & DSS_CLK_54M)
++		++num_clks;
++	if (clks & DSS_CLK_96M)
++		++num_clks;
++
++	return num_clks;
++}
++
++static void dss_clk_enable_no_ctx(enum dss_clock clks)
++{
++	unsigned num_clks = count_clk_bits(clks);
++
++	if (clks & DSS_CLK_ICK)
++		clk_enable(core.dss_ick);
++	if (clks & DSS_CLK_FCK1)
++		clk_enable(core.dss1_fck);
++	if (clks & DSS_CLK_FCK2)
++		clk_enable(core.dss2_fck);
++	if (clks & DSS_CLK_54M)
++		clk_enable(core.dss_54m_fck);
++	if (clks & DSS_CLK_96M)
++		clk_enable(core.dss_96m_fck);
++
++	core.num_clks_enabled += num_clks;
++}
++
++void dss_clk_enable(enum dss_clock clks)
++{
++	dss_clk_enable_no_ctx(clks);
++
++	if (cpu_is_omap34xx() && dss_need_ctx_restore())
++		restore_all_ctx();
++}
++
++static void dss_clk_disable_no_ctx(enum dss_clock clks)
++{
++	unsigned num_clks = count_clk_bits(clks);
++
++	if (clks & DSS_CLK_ICK)
++		clk_disable(core.dss_ick);
++	if (clks & DSS_CLK_FCK1)
++		clk_disable(core.dss1_fck);
++	if (clks & DSS_CLK_FCK2)
++		clk_disable(core.dss2_fck);
++	if (clks & DSS_CLK_54M)
++		clk_disable(core.dss_54m_fck);
++	if (clks & DSS_CLK_96M)
++		clk_disable(core.dss_96m_fck);
++
++	core.num_clks_enabled -= num_clks;
++}
++
++void dss_clk_disable(enum dss_clock clks)
++{
++	if (cpu_is_omap34xx()) {
++		unsigned num_clks = count_clk_bits(clks);
++
++		BUG_ON(core.num_clks_enabled < num_clks);
++
++		if (core.num_clks_enabled == num_clks)
++			save_all_ctx();
++	}
++
++	dss_clk_disable_no_ctx(clks);
++}
++
++static void dss_clk_enable_all_no_ctx(void)
++{
++	enum dss_clock clks;
++
++	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
++	if (cpu_is_omap34xx())
++		clks |= DSS_CLK_96M;
++	dss_clk_enable_no_ctx(clks);
++}
++
++static void dss_clk_disable_all_no_ctx(void)
++{
++	enum dss_clock clks;
++
++	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
++	if (cpu_is_omap34xx())
++		clks |= DSS_CLK_96M;
++	dss_clk_disable_no_ctx(clks);
++}
++
++static void dss_clk_disable_all(void)
++{
++	enum dss_clock clks;
++
++	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
++	if (cpu_is_omap34xx())
++		clks |= DSS_CLK_96M;
++	dss_clk_disable(clks);
++}
++
++/* DEBUGFS */
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
++static void dss_debug_dump_clocks(struct seq_file *s)
++{
++	dss_dump_clocks(s);
++	dispc_dump_clocks(s);
++#ifdef CONFIG_OMAP2_DSS_DSI
++	dsi_dump_clocks(s);
++#endif
++}
++
++static int dss_debug_show(struct seq_file *s, void *unused)
++{
++	void (*func)(struct seq_file *) = s->private;
++	func(s);
++	return 0;
++}
++
++static int dss_debug_open(struct inode *inode, struct file *file)
++{
++	return single_open(file, dss_debug_show, inode->i_private);
++}
++
++static const struct file_operations dss_debug_fops = {
++	.open           = dss_debug_open,
++	.read           = seq_read,
++	.llseek         = seq_lseek,
++	.release        = single_release,
++};
++
++static struct dentry *dss_debugfs_dir;
++
++static int dss_initialize_debugfs(void)
++{
++	dss_debugfs_dir = debugfs_create_dir("omapdss", NULL);
++	if (IS_ERR(dss_debugfs_dir)) {
++		int err = PTR_ERR(dss_debugfs_dir);
++		dss_debugfs_dir = NULL;
++		return err;
++	}
++
++	debugfs_create_file("clk", S_IRUGO, dss_debugfs_dir,
++			&dss_debug_dump_clocks, &dss_debug_fops);
++
++	debugfs_create_file("dss", S_IRUGO, dss_debugfs_dir,
++			&dss_dump_regs, &dss_debug_fops);
++	debugfs_create_file("dispc", S_IRUGO, dss_debugfs_dir,
++			&dispc_dump_regs, &dss_debug_fops);
++#ifdef CONFIG_OMAP2_DSS_RFBI
++	debugfs_create_file("rfbi", S_IRUGO, dss_debugfs_dir,
++			&rfbi_dump_regs, &dss_debug_fops);
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++	debugfs_create_file("dsi", S_IRUGO, dss_debugfs_dir,
++			&dsi_dump_regs, &dss_debug_fops);
++#endif
++	return 0;
++}
++
++static void dss_uninitialize_debugfs(void)
++{
++	if (dss_debugfs_dir)
++		debugfs_remove_recursive(dss_debugfs_dir);
++}
++#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
++
++
++/* DSI powers */
++int dss_dsi_power_up(void)
++{
++	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
++
++	if (!pdata->dsi_power_up)
++		return 0; /* presume power is always on then */
++
++	return pdata->dsi_power_up();
++}
++
++void dss_dsi_power_down(void)
++{
++	struct omap_dss_board_info *pdata = core.pdev->dev.platform_data;
++
++	if (!pdata->dsi_power_down)
++		return;
++
++	pdata->dsi_power_down();
++}
++
++
++
++/* PLATFORM DEVICE */
++static int omap_dss_probe(struct platform_device *pdev)
++{
++	int skip_init = 0;
++	int r;
++
++	core.pdev = pdev;
++
++	r = dss_get_clocks();
++	if (r)
++		goto fail0;
++
++	dss_clk_enable_all_no_ctx();
++
++	core.ctx_id = dss_get_ctx_id();
++	DSSDBG("initial ctx id %u\n", core.ctx_id);
++
++#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
++	/* DISPC_CONTROL */
++	if (omap_readl(0x48050440) & 1)	/* LCD enabled? */
++		skip_init = 1;
++#endif
++
++	r = dss_init(skip_init);
++	if (r) {
++		DSSERR("Failed to initialize DSS\n");
++		goto fail0;
++	}
++
++#ifdef CONFIG_OMAP2_DSS_RFBI
++	r = rfbi_init();
++	if (r) {
++		DSSERR("Failed to initialize rfbi\n");
++		goto fail0;
++	}
++#endif
++
++	r = dpi_init();
++	if (r) {
++		DSSERR("Failed to initialize dpi\n");
++		goto fail0;
++	}
++
++	r = dispc_init();
++	if (r) {
++		DSSERR("Failed to initialize dispc\n");
++		goto fail0;
++	}
++#ifdef CONFIG_OMAP2_DSS_VENC
++	r = venc_init();
++	if (r) {
++		DSSERR("Failed to initialize venc\n");
++		goto fail0;
++	}
++#endif
++	if (cpu_is_omap34xx()) {
++#ifdef CONFIG_OMAP2_DSS_SDI
++		r = sdi_init(skip_init);
++		if (r) {
++			DSSERR("Failed to initialize SDI\n");
++			goto fail0;
++		}
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++		r = dsi_init();
++		if (r) {
++			DSSERR("Failed to initialize DSI\n");
++			goto fail0;
++		}
++#endif
++	}
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
++	r = dss_initialize_debugfs();
++	if (r)
++		goto fail0;
++#endif
++
++	dss_init_displays(pdev);
++	dss_init_overlay_managers(pdev);
++	dss_init_overlays(pdev, def_disp_name);
++
++	dss_clk_disable_all();
++
++	return 0;
++
++	/* XXX fail correctly */
++fail0:
++	return r;
++}
++
++static int omap_dss_remove(struct platform_device *pdev)
++{
++	int c;
++
++	dss_uninit_overlays(pdev);
++	dss_uninit_overlay_managers(pdev);
++	dss_uninit_displays(pdev);
++
++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_OMAP2_DSS_DEBUG_SUPPORT)
++	dss_uninitialize_debugfs();
++#endif
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++	venc_exit();
++#endif
++	dispc_exit();
++	dpi_exit();
++#ifdef CONFIG_OMAP2_DSS_RFBI
++	rfbi_exit();
++#endif
++	if (cpu_is_omap34xx()) {
++#ifdef CONFIG_OMAP2_DSS_DSI
++		dsi_exit();
++#endif
++#ifdef CONFIG_OMAP2_DSS_SDI
++		sdi_exit();
++#endif
++	}
++
++	dss_exit();
++
++	/* these should be removed at some point */
++	c = core.dss_ick->usecount;
++	if (c > 0) {
++		DSSERR("warning: dss_ick usecount %d, disabling\n", c);
++		while (c-- > 0)
++			clk_disable(core.dss_ick);
++	}
++
++	c = core.dss1_fck->usecount;
++	if (c > 0) {
++		DSSERR("warning: dss1_fck usecount %d, disabling\n", c);
++		while (c-- > 0)
++			clk_disable(core.dss1_fck);
++	}
++
++	c = core.dss2_fck->usecount;
++	if (c > 0) {
++		DSSERR("warning: dss2_fck usecount %d, disabling\n", c);
++		while (c-- > 0)
++			clk_disable(core.dss2_fck);
++	}
++
++	c = core.dss_54m_fck->usecount;
++	if (c > 0) {
++		DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c);
++		while (c-- > 0)
++			clk_disable(core.dss_54m_fck);
++	}
++
++	if (core.dss_96m_fck) {
++		c = core.dss_96m_fck->usecount;
++		if (c > 0) {
++			DSSERR("warning: dss_96m_fck usecount %d, disabling\n",
++					c);
++			while (c-- > 0)
++				clk_disable(core.dss_96m_fck);
++		}
++	}
++
++	dss_put_clocks();
++
++	return 0;
++}
++
++static void omap_dss_shutdown(struct platform_device *pdev)
++{
++	DSSDBG("shutdown\n");
++}
++
++static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	DSSDBG("suspend %d\n", state.event);
++
++	return dss_suspend_all_displays();
++}
++
++static int omap_dss_resume(struct platform_device *pdev)
++{
++	DSSDBG("resume\n");
++
++	return dss_resume_all_displays();
++}
++
++static struct platform_driver omap_dss_driver = {
++	.probe          = omap_dss_probe,
++	.remove         = omap_dss_remove,
++	.shutdown	= omap_dss_shutdown,
++	.suspend	= omap_dss_suspend,
++	.resume		= omap_dss_resume,
++	.driver         = {
++		.name   = "omapdss",
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __init omap_dss_init(void)
++{
++	return platform_driver_register(&omap_dss_driver);
++}
++
++static void __exit omap_dss_exit(void)
++{
++	platform_driver_unregister(&omap_dss_driver);
++}
++
++subsys_initcall(omap_dss_init);
++module_exit(omap_dss_exit);
++
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("OMAP2/3 Display Subsystem");
++MODULE_LICENSE("GPL v2");
++
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+new file mode 100644
+index 0000000..ffb5648
+--- /dev/null
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -0,0 +1,2968 @@
++/*
++ * linux/drivers/video/omap2/dss/dispc.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * Some code and ideas taken from drivers/video/omap/ driver
@@ -443,6 +2621,9 @@ index 0000000..20caa48
 +#include <linux/clk.h>
 +#include <linux/io.h>
 +#include <linux/jiffies.h>
++#include <linux/seq_file.h>
++#include <linux/delay.h>
++#include <linux/workqueue.h>
 +
 +#include <mach/sram.h>
 +#include <mach/board.h>
@@ -545,11 +2726,11 @@ index 0000000..20caa48
 +
 +#define DISPC_MAX_NR_ISRS		8
 +
-+static struct {
++struct omap_dispc_isr_data {
 +	omap_dispc_isr_t	isr;
 +	void			*arg;
 +	u32			mask;
-+} registered_isr[DISPC_MAX_NR_ISRS];
++};
 +
 +#define REG_GET(idx, start, end) \
 +	FLD_GET(dispc_read_reg(idx), start, end)
@@ -572,9 +2753,18 @@ index 0000000..20caa48
 +	unsigned long	cache_prate;
 +	struct dispc_clock_info cache_cinfo;
 +
++	u32		irq_error_mask;
++	struct omap_dispc_isr_data registered_isr[DISPC_MAX_NR_ISRS];
++
++	spinlock_t error_lock;
++	u32 error_irqs;
++	struct work_struct error_work;
++
 +	u32		ctx[DISPC_SZ_REGS / sizeof(u32)];
 +} dispc;
 +
++static void omap_dispc_set_irqs(void);
++
 +static inline void dispc_write_reg(const struct dispc_reg idx, u32 val)
 +{
 +	__raw_writel(val, dispc.base + idx.idx);
@@ -877,7 +3067,7 @@ index 0000000..20caa48
 +#undef SR
 +#undef RR
 +
-+static inline void enable_clocks(int enable)
++static inline void enable_clocks(bool enable)
 +{
 +	if (enable)
 +		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -936,12 +3126,18 @@ index 0000000..20caa48
 +	dispc_write_reg(DISPC_VID_FIR_COEF_HV(plane-1, reg), value);
 +}
 +
++static void _dispc_write_firv_reg(enum omap_plane plane, int reg, u32 value)
++{
++	BUG_ON(plane == OMAP_DSS_GFX);
++
++	dispc_write_reg(DISPC_VID_FIR_COEF_V(plane-1, reg), value);
++}
 +
 +static void _dispc_set_scale_coef(enum omap_plane plane, int hscaleup,
-+		int vscaleup)
++		int vscaleup, int five_taps)
 +{
 +	/* Coefficients for horizontal up-sampling */
-+	const u32 coef_hup[8] = {
++	static const u32 coef_hup[8] = {
 +		0x00800000,
 +		0x0D7CF800,
 +		0x1E70F5FF,
@@ -953,7 +3149,7 @@ index 0000000..20caa48
 +	};
 +
 +	/* Coefficients for horizontal down-sampling */
-+	const u32 coef_hdown[8] = {
++	static const u32 coef_hdown[8] = {
 +		0x24382400,
 +		0x28371FFE,
 +		0x2C361BFB,
@@ -965,7 +3161,8 @@ index 0000000..20caa48
 +	};
 +
 +	/* Coefficients for horizontal and vertical up-sampling */
-+	const u32 coef_hvup[8] = {
++	static const u32 coef_hvup[2][8] = {
++		{
 +		0x00800000,
 +		0x037B02FF,
 +		0x0C6F05FE,
@@ -974,10 +3171,22 @@ index 0000000..20caa48
 +		0x075920FE,
 +		0x056F0CFF,
 +		0x027B0300,
++		},
++		{
++		0x00800000,
++		0x0D7CF8FF,
++		0x1E70F5FE,
++		0x335FF5FB,
++		0xF7404000,
++		0xF55F33FE,
++		0xF5701EFF,
++		0xF87C0D00,
++		},
 +	};
 +
 +	/* Coefficients for horizontal and vertical down-sampling */
-+	const u32 coef_hvdown[8] = {
++	static const u32 coef_hvdown[2][8] = {
++		{
 +		0x24382400,
 +		0x28391F04,
 +		0x2D381B08,
@@ -986,11 +3195,48 @@ index 0000000..20caa48
 +		0x173732F9,
 +		0x1B382DFB,
 +		0x1F3928FE,
++		},
++		{
++		0x24382400,
++		0x28371F04,
++		0x2C361B08,
++		0x3035160C,
++		0x113433F7,
++		0x163530F9,
++		0x1B362CFB,
++		0x1F3728FE,
++		},
++	};
++
++	/* Coefficients for vertical up-sampling */
++	static const u32 coef_vup[8] = {
++		0x00000000,
++		0x0000FF00,
++		0x0000FEFF,
++		0x0000FBFE,
++		0x000000F7,
++		0x0000FEFB,
++		0x0000FFFE,
++		0x000000FF,
++	};
++
++
++	/* Coefficients for vertical down-sampling */
++	static const u32 coef_vdown[8] = {
++		0x00000000,
++		0x000004FE,
++		0x000008FB,
++		0x00000CF9,
++		0x0000F711,
++		0x0000F90C,
++		0x0000FB08,
++		0x0000FE04,
 +	};
 +
 +	const u32 *h_coef;
 +	const u32 *hv_coef;
 +	const u32 *hv_coef_mod;
++	const u32 *v_coef;
 +	int i;
 +
 +	if (hscaleup)
@@ -999,17 +3245,19 @@ index 0000000..20caa48
 +		h_coef = coef_hdown;
 +
 +	if (vscaleup) {
-+		hv_coef = coef_hvup;
++		hv_coef = coef_hvup[five_taps];
++		v_coef = coef_vup;
 +
 +		if (hscaleup)
 +			hv_coef_mod = NULL;
 +		else
-+			hv_coef_mod = coef_hvdown;
++			hv_coef_mod = coef_hvdown[five_taps];
 +	} else {
-+		hv_coef = coef_hvdown;
++		hv_coef = coef_hvdown[five_taps];
++		v_coef = coef_vdown;
 +
 +		if (hscaleup)
-+			hv_coef_mod = coef_hvup;
++			hv_coef_mod = coef_hvup[five_taps];
 +		else
 +			hv_coef_mod = NULL;
 +	}
@@ -1029,6 +3277,15 @@ index 0000000..20caa48
 +		_dispc_write_firh_reg(plane, i, h);
 +		_dispc_write_firhv_reg(plane, i, hv);
 +	}
++
++	if (!five_taps)
++		return;
++
++	for (i = 0; i < 8; i++) {
++		u32 v;
++		v = v_coef[i];
++		_dispc_write_firv_reg(plane, i, v);
++	}
 +}
 +
 +static void _dispc_setup_color_conv_coef(void)
@@ -1114,7 +3371,16 @@ index 0000000..20caa48
 +	dispc_write_reg(vsi_reg[plane-1], val);
 +}
 +
-+static void _dispc_set_row_inc(enum omap_plane plane, int inc)
++static void _dispc_set_pix_inc(enum omap_plane plane, u16 inc)
++{
++	const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC,
++				     DISPC_VID_PIXEL_INC(0),
++				     DISPC_VID_PIXEL_INC(1) };
++
++	dispc_write_reg(ri_reg[plane], inc);
++}
++
++static void _dispc_set_row_inc(enum omap_plane plane, u16 inc)
 +{
 +	const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC,
 +				     DISPC_VID_ROW_INC(0),
@@ -1216,7 +3482,7 @@ index 0000000..20caa48
 +	enable_clocks(0);
 +}
 +
-+static void _dispc_set_vid_color_conv(enum omap_plane plane, int enable)
++static void _dispc_set_vid_color_conv(enum omap_plane plane, bool enable)
 +{
 +	u32 val;
 +
@@ -1227,7 +3493,7 @@ index 0000000..20caa48
 +	dispc_write_reg(dispc_reg_att[plane], val);
 +}
 +
-+void dispc_set_lcd_size(int width, int height)
++void dispc_set_lcd_size(u16 width, u16 height)
 +{
 +	u32 val;
 +	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
@@ -1237,7 +3503,7 @@ index 0000000..20caa48
 +	enable_clocks(0);
 +}
 +
-+void dispc_set_digit_size(int width, int height)
++void dispc_set_digit_size(u16 width, u16 height)
 +{
 +	u32 val;
 +	BUG_ON((width > (1 << 11)) || (height > (1 << 11)));
@@ -1263,6 +3529,12 @@ index 0000000..20caa48
 +	else
 +		BUG();
 +
++	if (cpu_is_omap34xx()) {
++		/* FIFOMERGE */
++		if (REG_GET(DISPC_CONFIG, 14, 14))
++			size *= 3;
++	}
++
 +	enable_clocks(0);
 +
 +	return size;
@@ -1273,19 +3545,11 @@ index 0000000..20caa48
 +	const struct dispc_reg ftrs_reg[] = { DISPC_GFX_FIFO_THRESHOLD,
 +				       DISPC_VID_FIFO_THRESHOLD(0),
 +				       DISPC_VID_FIFO_THRESHOLD(1) };
-+	const struct dispc_reg fsz_reg[] = { DISPC_GFX_FIFO_SIZE_STATUS,
-+				      DISPC_VID_FIFO_SIZE_STATUS(0),
-+				      DISPC_VID_FIFO_SIZE_STATUS(1) };
 +	u32 size;
 +
 +	enable_clocks(1);
 +
-+	if (cpu_is_omap24xx())
-+		size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 8, 0);
-+	else if (cpu_is_omap34xx())
-+		size = FLD_GET(dispc_read_reg(fsz_reg[plane]), 10, 0);
-+	else
-+		BUG();
++	size = dispc_get_plane_fifo_size(plane);
 +
 +	BUG_ON(low > size || high > size);
 +
@@ -1305,6 +3569,16 @@ index 0000000..20caa48
 +	enable_clocks(0);
 +}
 +
++void dispc_enable_fifomerge(bool enable)
++{
++	enable_clocks(1);
++
++	DSSDBG("FIFO merge %s\n", enable ? "enabled" : "disabled");
++	REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 14, 14);
++
++	enable_clocks(0);
++}
++
 +static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc)
 +{
 +	u32 val;
@@ -1343,13 +3617,13 @@ index 0000000..20caa48
 +
 +
 +static void _dispc_set_scaling(enum omap_plane plane,
-+			       int orig_width, int orig_height,
-+			       int out_width, int out_height,
-+			       int ilace)
++		u16 orig_width, u16 orig_height,
++		u16 out_width, u16 out_height,
++		bool ilace)
 +{
 +	int fir_hinc;
 +	int fir_vinc;
-+	int hscaleup, vscaleup;
++	int hscaleup, vscaleup, five_taps;
 +	int fieldmode = 0;
 +	int accu0 = 0;
 +	int accu1 = 0;
@@ -1359,8 +3633,9 @@ index 0000000..20caa48
 +
 +	hscaleup = orig_width <= out_width;
 +	vscaleup = orig_height <= out_height;
++	five_taps = orig_height > out_height * 2;
 +
-+	_dispc_set_scale_coef(plane, hscaleup, vscaleup);
++	_dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps);
 +
 +	if (!orig_width || orig_width == out_width)
 +		fir_hinc = 0;
@@ -1375,7 +3650,7 @@ index 0000000..20caa48
 +	_dispc_set_fir(plane, fir_hinc, fir_vinc);
 +
 +	l = dispc_read_reg(dispc_reg_att[plane]);
-+	l &= ~(0x0f << 5);
++	l &= ~((0x0f << 5) | (0x3 << 21));
 +
 +	l |= fir_hinc ? (1 << 5) : 0;
 +	l |= fir_vinc ? (1 << 6) : 0;
@@ -1383,6 +3658,9 @@ index 0000000..20caa48
 +	l |= hscaleup ? 0 : (1 << 7);
 +	l |= vscaleup ? 0 : (1 << 8);
 +
++	l |= five_taps ? (1 << 21) : 0;
++	l |= five_taps ? (1 << 22) : 0;
++
 +	dispc_write_reg(dispc_reg_att[plane], l);
 +
 +	if (ilace) {
@@ -1403,155 +3681,467 @@ index 0000000..20caa48
 +	_dispc_set_vid_accu1(plane, 0, accu1);
 +}
 +
-+static int _dispc_setup_plane(enum omap_plane plane,
-+		enum omap_channel channel_out,
-+		u32 paddr, int screen_width,
-+		int pos_x, int pos_y,
-+		int width, int height,
-+		int out_width, int out_height,
-+		enum omap_color_mode color_mode,
-+		int ilace)
++static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation,
++		bool mirroring, enum omap_color_mode color_mode)
 +{
-+	int fieldmode = 0;
-+	int bpp;
-+	int cconv;
-+	int scaling = 0;
++	if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++			color_mode == OMAP_DSS_COLOR_UYVY) {
++		int vidrot = 0;
 +
-+	if (plane == OMAP_DSS_GFX) {
-+		if (width != out_width || height != out_height)
-+			return -EINVAL;
-+	} else {
-+		/* video plane */
-+		if (width != out_width || height != out_height)
-+			scaling = 1;
++		if (mirroring) {
++			switch (rotation) {
++			case 0: vidrot = 2; break;
++			case 1: vidrot = 3; break;
++			case 2: vidrot = 0; break;
++			case 3: vidrot = 1; break;
++			}
++		} else {
++			switch (rotation) {
++			case 0: vidrot = 0; break;
++			case 1: vidrot = 1; break;
++			case 2: vidrot = 2; break;
++			case 3: vidrot = 1; break;
++			}
++		}
 +
-+		if (out_width < width/2 ||
-+		   out_width > width*8)
-+			return -EINVAL;
++		REG_FLD_MOD(dispc_reg_att[plane], vidrot, 13, 12);
 +
-+		if (out_height < height/2 ||
-+		   out_height > height*8)
-+			return -EINVAL;
++		if (rotation == 1 || rotation == 3)
++			REG_FLD_MOD(dispc_reg_att[plane], 0x1, 18, 18);
++		else
++			REG_FLD_MOD(dispc_reg_att[plane], 0x0, 18, 18);
++	} else {
++		REG_FLD_MOD(dispc_reg_att[plane], 0, 13, 12);
++		REG_FLD_MOD(dispc_reg_att[plane], 0, 18, 18);
 +	}
++}
 +
++static int pixinc(int pixels, u8 ps)
++{
++	if (pixels == 1)
++		return 1;
++	else if (pixels > 1)
++		return 1 + (pixels - 1) * ps;
++	else if (pixels < 0)
++		return 1 - (-pixels + 1) * ps;
++	else
++		BUG();
++}
++
++static void calc_rotation_offset(u8 rotation, bool mirror,
++		u16 screen_width,
++		u16 width, u16 height,
++		enum omap_color_mode color_mode, bool fieldmode,
++		unsigned *offset0, unsigned *offset1,
++		u16 *row_inc, u16 *pix_inc)
++{
++	u8 ps;
++	u16 fbw, fbh;
 +
 +	switch (color_mode) {
 +	case OMAP_DSS_COLOR_RGB16:
-+		bpp = 16;
-+		cconv = 0;
++	case OMAP_DSS_COLOR_ARGB16:
++		ps = 2;
 +		break;
 +
 +	case OMAP_DSS_COLOR_RGB24P:
-+		bpp = 24;
-+		cconv = 0;
++		ps = 3;
 +		break;
 +
 +	case OMAP_DSS_COLOR_RGB24U:
-+		bpp = 32;
-+		cconv = 0;
++	case OMAP_DSS_COLOR_ARGB32:
++	case OMAP_DSS_COLOR_RGBA32:
++	case OMAP_DSS_COLOR_RGBX32:
++		ps = 4;
 +		break;
 +
 +	case OMAP_DSS_COLOR_YUV2:
 +	case OMAP_DSS_COLOR_UYVY:
-+		BUG_ON(plane == OMAP_DSS_GFX);
-+		bpp = 16;
-+		cconv = 1;
++		ps = 2;
++		break;
++	default:
++		BUG();
++		return;
++	}
++
++	DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width,
++			width, height);
++
++	/* width & height are overlay sizes, convert to fb sizes */
++
++	if (rotation == 0 || rotation == 2) {
++		fbw = width;
++		fbh = height;
++	} else {
++		fbw = height;
++		fbh = width;
++	}
++
++	switch (rotation + mirror * 4) {
++	case 0:
++		*offset0 = 0;
++		if (fieldmode)
++			*offset1 = screen_width * ps;
++		else
++			*offset1 = 0;
++		*row_inc = pixinc(1 + (screen_width - fbw) +
++				(fieldmode ? screen_width : 0),
++				ps);
++		*pix_inc = pixinc(1, ps);
++		break;
++	case 1:
++		*offset0 = screen_width * (fbh - 1) * ps;
++		if (fieldmode)
++			*offset1 = *offset0 + ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(screen_width * (fbh - 1) + 1 +
++				(fieldmode ? 1 : 0), ps);
++		*pix_inc = pixinc(-screen_width, ps);
++		break;
++	case 2:
++		*offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps;
++		if (fieldmode)
++			*offset1 = *offset0 - screen_width * ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(-1 -
++				(screen_width - fbw) -
++				(fieldmode ? screen_width : 0),
++				ps);
++		*pix_inc = pixinc(-1, ps);
++		break;
++	case 3:
++		*offset0 = (fbw - 1) * ps;
++		if (fieldmode)
++			*offset1 = *offset0 - ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(-screen_width * (fbh - 1) - 1 -
++				(fieldmode ? 1 : 0), ps);
++		*pix_inc = pixinc(screen_width, ps);
++		break;
++
++	/* mirroring */
++	case 0 + 4:
++		*offset0 = (fbw - 1) * ps;
++		if (fieldmode)
++			*offset1 = *offset0 + screen_width * ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(screen_width * 2 - 1 +
++				(fieldmode ? screen_width : 0),
++				ps);
++		*pix_inc = pixinc(-1, ps);
++		break;
++
++	case 1 + 4:
++		*offset0 = 0;
++		if (fieldmode)
++			*offset1 = *offset0 + screen_width * ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(-screen_width * (fbh - 1) + 1 +
++				(fieldmode ? 1 : 0),
++				ps);
++		*pix_inc = pixinc(screen_width, ps);
++		break;
++
++	case 2 + 4:
++		*offset0 = screen_width * (fbh - 1) * ps;
++		if (fieldmode)
++			*offset1 = *offset0 + screen_width * ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(1 - screen_width * 2 -
++				(fieldmode ? screen_width : 0),
++				ps);
++		*pix_inc = pixinc(1, ps);
++		break;
++
++	case 3 + 4:
++		*offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps;
++		if (fieldmode)
++			*offset1 = *offset0 + screen_width * ps;
++		else
++			*offset1 = *offset0;
++		*row_inc = pixinc(screen_width * (fbh - 1) - 1 -
++				(fieldmode ? 1 : 0),
++				ps);
++		*pix_inc = pixinc(-screen_width, ps);
 +		break;
 +
 +	default:
 +		BUG();
-+		return 1;
 +	}
++}
 +
-+	if (ilace) {
-+		if (height == out_height || height > out_height)
-+			fieldmode = 1;
++static int _dispc_setup_plane(enum omap_plane plane,
++		enum omap_channel channel_out,
++		u32 paddr, u16 screen_width,
++		u16 pos_x, u16 pos_y,
++		u16 width, u16 height,
++		u16 out_width, u16 out_height,
++		enum omap_color_mode color_mode,
++		bool ilace,
++		u8 rotation, int mirror)
++{
++	const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
++	bool five_taps = height > out_height * 2;
++	bool fieldmode = 0;
++	int cconv = 0;
++	unsigned offset0, offset1;
++	u16 row_inc;
++	u16 pix_inc;
++
++	if (plane == OMAP_DSS_GFX) {
++		if (width != out_width || height != out_height)
++			return -EINVAL;
++
++		switch (color_mode) {
++		case OMAP_DSS_COLOR_ARGB16:
++		case OMAP_DSS_COLOR_RGB16:
++		case OMAP_DSS_COLOR_RGB24P:
++		case OMAP_DSS_COLOR_RGB24U:
++		case OMAP_DSS_COLOR_ARGB32:
++		case OMAP_DSS_COLOR_RGBA32:
++		case OMAP_DSS_COLOR_RGBX32:
++			break;
++
++		default:
++			return -EINVAL;
++		}
++	} else {
++		/* video plane */
++		if (width > (2048 >> five_taps))
++			return -EINVAL;
++
++		if (out_width < width / maxdownscale ||
++		   out_width > width * 8)
++			return -EINVAL;
++
++		if (out_height < height / maxdownscale ||
++		   out_height > height * 8)
++			return -EINVAL;
++
++		switch (color_mode) {
++		case OMAP_DSS_COLOR_RGB16:
++		case OMAP_DSS_COLOR_RGB24P:
++		case OMAP_DSS_COLOR_RGB24U:
++		case OMAP_DSS_COLOR_RGBX32:
++			break;
++
++		case OMAP_DSS_COLOR_ARGB16:
++		case OMAP_DSS_COLOR_ARGB32:
++		case OMAP_DSS_COLOR_RGBA32:
++			if (plane == OMAP_DSS_VIDEO1)
++				return -EINVAL;
++			break;
++
++		case OMAP_DSS_COLOR_YUV2:
++		case OMAP_DSS_COLOR_UYVY:
++			cconv = 1;
++			break;
++
++		default:
++			return -EINVAL;
++		}
 +	}
 +
-+	if (fieldmode)
-+		height /= 2;
++	if (ilace && height >= out_height)
++		fieldmode = 1;
 +
-+	if (ilace)
++	calc_rotation_offset(rotation, mirror,
++			screen_width, width, height, color_mode,
++			fieldmode,
++			&offset0, &offset1, &row_inc, &pix_inc);
++
++	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
++			offset0, offset1, row_inc, pix_inc);
++
++	if (ilace) {
++		if (fieldmode)
++			height /= 2;
++		pos_y /= 2;
 +		out_height /= 2;
 +
-+	if (plane != OMAP_DSS_GFX)
-+		_dispc_set_scaling(plane, width, height,
-+				   out_width, out_height,
-+				   ilace);
++		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
++				"out_height %d\n",
++				height, pos_y, out_height);
++	}
 +
-+	/* attributes */
 +	_dispc_set_channel_out(plane, channel_out);
 +	_dispc_set_color_mode(plane, color_mode);
-+	if (plane != OMAP_DSS_GFX)
-+		_dispc_set_vid_color_conv(plane, cconv);
-+
-+	/* */
 +
-+	_dispc_set_plane_ba0(plane, paddr);
++	_dispc_set_plane_ba0(plane, paddr + offset0);
++	_dispc_set_plane_ba1(plane, paddr + offset1);
 +
-+	if (fieldmode)
-+		_dispc_set_plane_ba1(plane, paddr + screen_width * bpp/8);
-+	else
-+		_dispc_set_plane_ba1(plane, paddr);
++	_dispc_set_row_inc(plane, row_inc);
++	_dispc_set_pix_inc(plane, pix_inc);
 +
++	DSSDBG("%d,%d %dx%d -> %dx%d\n", pos_x, pos_y, width, height,
++			out_width, out_height);
 +
 +	_dispc_set_plane_pos(plane, pos_x, pos_y);
 +
 +	_dispc_set_pic_size(plane, width, height);
 +
-+	if (plane != OMAP_DSS_GFX)
++	if (plane != OMAP_DSS_GFX) {
++		_dispc_set_scaling(plane, width, height,
++				   out_width, out_height,
++				   ilace);
 +		_dispc_set_vid_size(plane, out_width, out_height);
++		_dispc_set_vid_color_conv(plane, cconv);
++	}
 +
-+	_dispc_set_row_inc(plane,
-+			   (screen_width - width) * bpp / 8 +
-+			   (fieldmode ? screen_width * bpp / 8 : 0) +
-+			   1);
++	_dispc_set_rotation_attrs(plane, rotation, mirror, color_mode);
 +
 +	return 0;
 +}
 +
-+static void _dispc_enable_plane(enum omap_plane plane, int enable)
++static void _dispc_enable_plane(enum omap_plane plane, bool enable)
 +{
 +	REG_FLD_MOD(dispc_reg_att[plane], enable ? 1 : 0, 0, 0);
 +}
 +
++static void dispc_disable_isr(void *data, u32 mask)
++{
++	struct completion *compl = data;
++	complete(compl);
++}
 +
-+void dispc_enable_lcd_out(int enable)
++static void _enable_lcd_out(bool enable)
 +{
-+	enable_clocks(1);
 +	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 0, 0);
-+	enable_clocks(0);
 +}
 +
-+void dispc_enable_digit_out(int enable)
++void dispc_enable_lcd_out(bool enable)
 +{
++	struct completion frame_done_completion;
++	bool is_on;
++	int r;
++
 +	enable_clocks(1);
++
++	/* When we disable LCD output, we need to wait until frame is done.
++	 * Otherwise the DSS is still working, and turning off the clocks
++	 * prevents DSS from going to OFF mode */
++	is_on = REG_GET(DISPC_CONTROL, 0, 0);
++
++	if (!enable && is_on) {
++		init_completion(&frame_done_completion);
++
++		r = omap_dispc_register_isr(dispc_disable_isr,
++				&frame_done_completion,
++				DISPC_IRQ_FRAMEDONE);
++
++		if (r)
++			DSSERR("failed to register FRAMEDONE isr\n");
++	}
++
++	_enable_lcd_out(enable);
++
++	if (!enable && is_on) {
++		if (!wait_for_completion_timeout(&frame_done_completion,
++					msecs_to_jiffies(100)))
++			DSSERR("timeout waiting for FRAME DONE\n");
++
++		r = omap_dispc_unregister_isr(dispc_disable_isr,
++				&frame_done_completion,
++				DISPC_IRQ_FRAMEDONE);
++
++		if (r)
++			DSSERR("failed to unregister FRAMEDONE isr\n");
++	}
++
++	enable_clocks(0);
++}
++
++static void _enable_digit_out(bool enable)
++{
 +	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 1, 1);
++}
++
++void dispc_enable_digit_out(bool enable)
++{
++	struct completion frame_done_completion;
++	int r;
++
++	enable_clocks(1);
++
++	if (REG_GET(DISPC_CONTROL, 1, 1) == enable) {
++		enable_clocks(0);
++		return;
++	}
++
++	if (enable) {
++		/* When we enable digit output, we'll get an extra digit
++		 * sync lost interrupt, that we need to ignore */
++		dispc.irq_error_mask &= ~DISPC_IRQ_SYNC_LOST_DIGIT;
++		omap_dispc_set_irqs();
++	}
++
++	/* When we disable digit output, we need to wait until fields are done.
++	 * Otherwise the DSS is still working, and turning off the clocks
++	 * prevents DSS from going to OFF mode. And when enabling, we need to
++	 * wait for the extra sync losts */
++	init_completion(&frame_done_completion);
++
++	r = omap_dispc_register_isr(dispc_disable_isr, &frame_done_completion,
++			DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
++	if (r)
++		DSSERR("failed to register EVSYNC isr\n");
++
++	_enable_digit_out(enable);
++
++	/* XXX I understand from TRM that we should only wait for the
++	 * current field to complete. But it seems we have to wait
++	 * for both fields */
++	if (!wait_for_completion_timeout(&frame_done_completion,
++				msecs_to_jiffies(100)))
++		DSSERR("timeout waiting for EVSYNC\n");
++
++	if (!wait_for_completion_timeout(&frame_done_completion,
++				msecs_to_jiffies(100)))
++		DSSERR("timeout waiting for EVSYNC\n");
++
++	r = omap_dispc_unregister_isr(dispc_disable_isr,
++			&frame_done_completion,
++			DISPC_IRQ_EVSYNC_EVEN | DISPC_IRQ_EVSYNC_ODD);
++	if (r)
++		DSSERR("failed to unregister EVSYNC isr\n");
++
++	if (enable) {
++		dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
++		dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
++		omap_dispc_set_irqs();
++	}
++
 +	enable_clocks(0);
 +}
 +
-+void dispc_lcd_enable_signal_polarity(int act_high)
++void dispc_lcd_enable_signal_polarity(bool act_high)
 +{
 +	enable_clocks(1);
 +	REG_FLD_MOD(DISPC_CONTROL, act_high ? 1 : 0, 29, 29);
 +	enable_clocks(0);
 +}
 +
-+void dispc_lcd_enable_signal(int enable)
++void dispc_lcd_enable_signal(bool enable)
 +{
 +	enable_clocks(1);
 +	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 28, 28);
 +	enable_clocks(0);
 +}
 +
-+void dispc_pck_free_enable(int enable)
++void dispc_pck_free_enable(bool enable)
 +{
 +	enable_clocks(1);
 +	REG_FLD_MOD(DISPC_CONTROL, enable ? 1 : 0, 27, 27);
 +	enable_clocks(0);
 +}
 +
-+void dispc_enable_fifohandcheck(int enable)
++void dispc_enable_fifohandcheck(bool enable)
 +{
 +	enable_clocks(1);
 +	REG_FLD_MOD(DISPC_CONFIG, enable ? 1 : 0, 16, 16);
@@ -1590,7 +4180,7 @@ index 0000000..20caa48
 +}
 +
 +
-+void omap_dispc_set_default_color(enum omap_channel channel, u32 color)
++void dispc_set_default_color(enum omap_channel channel, u32 color)
 +{
 +	const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0,
 +				DISPC_DEFAULT_COLOR1 };
@@ -1600,7 +4190,23 @@ index 0000000..20caa48
 +	enable_clocks(0);
 +}
 +
-+void omap_dispc_set_trans_key(enum omap_channel ch,
++u32 dispc_get_default_color(enum omap_channel channel)
++{
++	const struct dispc_reg def_reg[] = { DISPC_DEFAULT_COLOR0,
++				DISPC_DEFAULT_COLOR1 };
++	u32 l;
++
++	BUG_ON(channel != OMAP_DSS_CHANNEL_DIGIT &&
++	       channel != OMAP_DSS_CHANNEL_LCD);
++
++	enable_clocks(1);
++	l = dispc_read_reg(def_reg[channel]);
++	enable_clocks(0);
++
++	return l;
++}
++
++void dispc_set_trans_key(enum omap_channel ch,
 +		enum omap_dss_color_key_type type,
 +		u32 trans_key)
 +{
@@ -1617,7 +4223,29 @@ index 0000000..20caa48
 +	enable_clocks(0);
 +}
 +
-+void omap_dispc_enable_trans_key(enum omap_channel ch, int enable)
++void dispc_get_trans_key(enum omap_channel ch,
++		enum omap_dss_color_key_type *type,
++		u32 *trans_key)
++{
++	const struct dispc_reg tr_reg[] = {
++		DISPC_TRANS_COLOR0, DISPC_TRANS_COLOR1 };
++
++	enable_clocks(1);
++	if (type) {
++		if (ch == OMAP_DSS_CHANNEL_LCD)
++			*type = REG_GET(DISPC_CONFIG, 11, 11) >> 11;
++		else if (ch == OMAP_DSS_CHANNEL_DIGIT)
++			*type = REG_GET(DISPC_CONFIG, 13, 13) >> 13;
++		else
++			BUG();
++	}
++
++	if (trans_key)
++		*trans_key = dispc_read_reg(tr_reg[ch]);
++	enable_clocks(0);
++}
++
++void dispc_enable_trans_key(enum omap_channel ch, bool enable)
 +{
 +	enable_clocks(1);
 +	if (ch == OMAP_DSS_CHANNEL_LCD)
@@ -1627,7 +4255,23 @@ index 0000000..20caa48
 +	enable_clocks(0);
 +}
 +
-+void dispc_set_tft_data_lines(int data_lines)
++bool dispc_trans_key_enabled(enum omap_channel ch)
++{
++	bool enabled;
++
++	enable_clocks(1);
++	if (ch == OMAP_DSS_CHANNEL_LCD)
++		enabled = REG_GET(DISPC_CONFIG, 10, 10);
++	else if (ch == OMAP_DSS_CHANNEL_DIGIT)
++		enabled = REG_GET(DISPC_CONFIG, 12, 12);
++	else BUG();
++	enable_clocks(0);
++
++	return enabled;
++}
++
++
++void dispc_set_tft_data_lines(u8 data_lines)
 +{
 +	int code;
 +
@@ -1700,19 +4344,35 @@ index 0000000..20caa48
 +{
 +	u32 timing_h, timing_v;
 +
-+	BUG_ON(hsw < 1 || hsw > 64);
-+	BUG_ON(hfp < 1 || hfp > 256);
-+	BUG_ON(hbp < 1 || hbp > 256);
++	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
++		BUG_ON(hsw < 1 || hsw > 64);
++		BUG_ON(hfp < 1 || hfp > 256);
++		BUG_ON(hbp < 1 || hbp > 256);
++
++		BUG_ON(vsw < 1 || vsw > 64);
++		BUG_ON(vfp < 0 || vfp > 255);
++		BUG_ON(vbp < 0 || vbp > 255);
 +
-+	BUG_ON(vsw < 1 || vsw > 64);
-+	BUG_ON(vfp < 0 || vfp > 255);
-+	BUG_ON(vbp < 0 || vbp > 255);
++		timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
++			FLD_VAL(hbp-1, 27, 20);
 +
-+	timing_h = FLD_VAL(hsw-1, 5, 0) | FLD_VAL(hfp-1, 15, 8) |
-+		FLD_VAL(hbp-1, 27, 20);
++		timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) |
++			FLD_VAL(vbp, 27, 20);
++	} else {
++		BUG_ON(hsw < 1 || hsw > 256);
++		BUG_ON(hfp < 1 || hfp > 4096);
++		BUG_ON(hbp < 1 || hbp > 4096);
 +
-+	timing_v = FLD_VAL(vsw-1, 5, 0) | FLD_VAL(vfp, 15, 8) |
-+		FLD_VAL(vbp, 27, 20);
++		BUG_ON(vsw < 1 || vsw > 256);
++		BUG_ON(vfp < 0 || vfp > 4095);
++		BUG_ON(vbp < 0 || vbp > 4095);
++
++		timing_h = FLD_VAL(hsw-1, 7, 0) | FLD_VAL(hfp-1, 19, 8) |
++			FLD_VAL(hbp-1, 31, 20);
++
++		timing_v = FLD_VAL(vsw-1, 7, 0) | FLD_VAL(vfp, 19, 8) |
++			FLD_VAL(vbp, 31, 20);
++	}
 +
 +	enable_clocks(1);
 +	dispc_write_reg(DISPC_TIMING_H, timing_h);
@@ -1746,7 +4406,7 @@ index 0000000..20caa48
 +	DSSDBG("hsync %luHz, vsync %luHz\n", ht, vt);
 +}
 +
-+void dispc_set_lcd_divisor(int lck_div, int pck_div)
++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div)
 +{
 +	BUG_ON(lck_div < 1);
 +	BUG_ON(pck_div < 2);
@@ -1796,34 +4456,175 @@ index 0000000..20caa48
 +	return r / lcd / pcd;
 +}
 +
-+ssize_t dispc_print_clocks(char *buf, ssize_t size)
++void dispc_dump_clocks(struct seq_file *s)
 +{
-+	ssize_t l = 0;
 +	int lcd, pcd;
 +
 +	enable_clocks(1);
 +
 +	dispc_get_lcd_divisor(&lcd, &pcd);
 +
-+	l += snprintf(buf + l, size - l, "- dispc -\n");
++	seq_printf(s, "- dispc -\n");
 +
-+	l += snprintf(buf + l, size - l, "dispc fclk source = %s\n",
++	seq_printf(s, "dispc fclk source = %s\n",
 +			dss_get_dispc_clk_source() == 0 ?
 +			"dss1_alwon_fclk" : "dsi1_pll_fclk");
 +
-+	l += snprintf(buf + l, size - l,
-+			"pixel clk = %lu / %d / %d = %lu\n",
++	seq_printf(s, "pixel clk = %lu / %d / %d = %lu\n",
 +			dispc_fclk_rate(),
 +			lcd, pcd,
 +			dispc_pclk_rate());
 +
 +	enable_clocks(0);
++}
 +
-+	return l;
++void dispc_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dispc_read_reg(r))
++
++	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	DUMPREG(DISPC_REVISION);
++	DUMPREG(DISPC_SYSCONFIG);
++	DUMPREG(DISPC_SYSSTATUS);
++	DUMPREG(DISPC_IRQSTATUS);
++	DUMPREG(DISPC_IRQENABLE);
++	DUMPREG(DISPC_CONTROL);
++	DUMPREG(DISPC_CONFIG);
++	DUMPREG(DISPC_CAPABLE);
++	DUMPREG(DISPC_DEFAULT_COLOR0);
++	DUMPREG(DISPC_DEFAULT_COLOR1);
++	DUMPREG(DISPC_TRANS_COLOR0);
++	DUMPREG(DISPC_TRANS_COLOR1);
++	DUMPREG(DISPC_LINE_STATUS);
++	DUMPREG(DISPC_LINE_NUMBER);
++	DUMPREG(DISPC_TIMING_H);
++	DUMPREG(DISPC_TIMING_V);
++	DUMPREG(DISPC_POL_FREQ);
++	DUMPREG(DISPC_DIVISOR);
++	DUMPREG(DISPC_GLOBAL_ALPHA);
++	DUMPREG(DISPC_SIZE_DIG);
++	DUMPREG(DISPC_SIZE_LCD);
++
++	DUMPREG(DISPC_GFX_BA0);
++	DUMPREG(DISPC_GFX_BA1);
++	DUMPREG(DISPC_GFX_POSITION);
++	DUMPREG(DISPC_GFX_SIZE);
++	DUMPREG(DISPC_GFX_ATTRIBUTES);
++	DUMPREG(DISPC_GFX_FIFO_THRESHOLD);
++	DUMPREG(DISPC_GFX_FIFO_SIZE_STATUS);
++	DUMPREG(DISPC_GFX_ROW_INC);
++	DUMPREG(DISPC_GFX_PIXEL_INC);
++	DUMPREG(DISPC_GFX_WINDOW_SKIP);
++	DUMPREG(DISPC_GFX_TABLE_BA);
++
++	DUMPREG(DISPC_DATA_CYCLE1);
++	DUMPREG(DISPC_DATA_CYCLE2);
++	DUMPREG(DISPC_DATA_CYCLE3);
++
++	DUMPREG(DISPC_CPR_COEF_R);
++	DUMPREG(DISPC_CPR_COEF_G);
++	DUMPREG(DISPC_CPR_COEF_B);
++
++	DUMPREG(DISPC_GFX_PRELOAD);
++
++	DUMPREG(DISPC_VID_BA0(0));
++	DUMPREG(DISPC_VID_BA1(0));
++	DUMPREG(DISPC_VID_POSITION(0));
++	DUMPREG(DISPC_VID_SIZE(0));
++	DUMPREG(DISPC_VID_ATTRIBUTES(0));
++	DUMPREG(DISPC_VID_FIFO_THRESHOLD(0));
++	DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(0));
++	DUMPREG(DISPC_VID_ROW_INC(0));
++	DUMPREG(DISPC_VID_PIXEL_INC(0));
++	DUMPREG(DISPC_VID_FIR(0));
++	DUMPREG(DISPC_VID_PICTURE_SIZE(0));
++	DUMPREG(DISPC_VID_ACCU0(0));
++	DUMPREG(DISPC_VID_ACCU1(0));
++
++	DUMPREG(DISPC_VID_BA0(1));
++	DUMPREG(DISPC_VID_BA1(1));
++	DUMPREG(DISPC_VID_POSITION(1));
++	DUMPREG(DISPC_VID_SIZE(1));
++	DUMPREG(DISPC_VID_ATTRIBUTES(1));
++	DUMPREG(DISPC_VID_FIFO_THRESHOLD(1));
++	DUMPREG(DISPC_VID_FIFO_SIZE_STATUS(1));
++	DUMPREG(DISPC_VID_ROW_INC(1));
++	DUMPREG(DISPC_VID_PIXEL_INC(1));
++	DUMPREG(DISPC_VID_FIR(1));
++	DUMPREG(DISPC_VID_PICTURE_SIZE(1));
++	DUMPREG(DISPC_VID_ACCU0(1));
++	DUMPREG(DISPC_VID_ACCU1(1));
++
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 0));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 1));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 2));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 3));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 5));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 6));
++	DUMPREG(DISPC_VID_FIR_COEF_H(0, 7));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 0));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 1));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 2));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 3));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 5));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 6));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(0, 7));
++	DUMPREG(DISPC_VID_CONV_COEF(0, 0));
++	DUMPREG(DISPC_VID_CONV_COEF(0, 1));
++	DUMPREG(DISPC_VID_CONV_COEF(0, 2));
++	DUMPREG(DISPC_VID_CONV_COEF(0, 3));
++	DUMPREG(DISPC_VID_CONV_COEF(0, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 0));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 1));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 2));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 3));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 5));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 6));
++	DUMPREG(DISPC_VID_FIR_COEF_V(0, 7));
++
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 0));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 1));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 2));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 3));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 5));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 6));
++	DUMPREG(DISPC_VID_FIR_COEF_H(1, 7));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 0));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 1));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 2));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 3));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 5));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 6));
++	DUMPREG(DISPC_VID_FIR_COEF_HV(1, 7));
++	DUMPREG(DISPC_VID_CONV_COEF(1, 0));
++	DUMPREG(DISPC_VID_CONV_COEF(1, 1));
++	DUMPREG(DISPC_VID_CONV_COEF(1, 2));
++	DUMPREG(DISPC_VID_CONV_COEF(1, 3));
++	DUMPREG(DISPC_VID_CONV_COEF(1, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 0));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 1));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 2));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 3));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 4));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 5));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 6));
++	DUMPREG(DISPC_VID_FIR_COEF_V(1, 7));
++
++	DUMPREG(DISPC_VID_PRELOAD(0));
++	DUMPREG(DISPC_VID_PRELOAD(1));
++
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
 +}
 +
-+static void _dispc_set_pol_freq(int onoff, int rf, int ieo, int ipc,
-+				int ihs, int ivs, int acbi, int acb)
++static void _dispc_set_pol_freq(bool onoff, bool rf, bool ieo, bool ipc,
++				bool ihs, bool ivs, u8 acbi, u8 acb)
 +{
 +	u32 l = 0;
 +
@@ -1855,13 +4656,13 @@ index 0000000..20caa48
 +				 panel->acbi, panel->acb);
 +}
 +
-+void find_lck_pck_divs(int is_tft, unsigned long req_pck, unsigned long fck,
-+		int *lck_div, int *pck_div)
++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
++		u16 *lck_div, u16 *pck_div)
 +{
-+	int pcd_min = is_tft ? 2 : 3;
++	u16 pcd_min = is_tft ? 2 : 3;
 +	unsigned long best_pck;
-+	int best_ld, cur_ld;
-+	int best_pd, cur_pd;
++	u16 best_ld, cur_ld;
++	u16 best_pd, cur_pd;
 +
 +	best_pck = 0;
 +	best_ld = 0;
@@ -1897,13 +4698,14 @@ index 0000000..20caa48
 +	*pck_div = best_pd;
 +}
 +
-+int dispc_calc_clock_div(int is_tft, unsigned long req_pck,
++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck,
 +		struct dispc_clock_info *cinfo)
 +{
 +	unsigned long prate;
 +	struct dispc_clock_info cur, best;
 +	int match = 0;
 +	int min_fck_per_pck;
++	unsigned long fck_rate = dss_clk_get_rate(DSS_CLK_FCK1);
 +
 +	if (cpu_is_omap34xx())
 +		prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
@@ -1912,7 +4714,7 @@ index 0000000..20caa48
 +
 +	if (req_pck == dispc.cache_req_pck &&
 +			((cpu_is_omap34xx() && prate == dispc.cache_prate) ||
-+			 dispc.cache_cinfo.fck == dss_clk_get_rate(DSS_CLK_FCK1))) {
++			 dispc.cache_cinfo.fck == fck_rate)) {
 +		DSSDBG("dispc clock info found from cache.\n");
 +		*cinfo = dispc.cache_cinfo;
 +		return 0;
@@ -2028,70 +4830,120 @@ index 0000000..20caa48
 +	return 0;
 +}
 +
++int dispc_get_clock_div(struct dispc_clock_info *cinfo)
++{
++	cinfo->fck = dss_clk_get_rate(DSS_CLK_FCK1);
++
++	if (cpu_is_omap34xx()) {
++		unsigned long prate;
++		prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
++		cinfo->fck_div = prate / (cinfo->fck / 2);
++	} else {
++		cinfo->fck_div = 0;
++	}
++
++	cinfo->lck_div = REG_GET(DISPC_DIVISOR, 23, 16);
++	cinfo->pck_div = REG_GET(DISPC_DIVISOR, 7, 0);
++
++	cinfo->lck = cinfo->fck / cinfo->lck_div;
++	cinfo->pck = cinfo->lck / cinfo->pck_div;
++
++	return 0;
++}
++
++static void omap_dispc_set_irqs(void)
++{
++	unsigned long flags;
++	u32 mask = dispc.irq_error_mask;
++	int i;
++	struct omap_dispc_isr_data *isr_data;
++
++	spin_lock_irqsave(&dispc.irq_lock, flags);
++
++	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++		isr_data = &dispc.registered_isr[i];
++
++		if (isr_data->isr == NULL)
++			continue;
++
++		mask |= isr_data->mask;
++	}
++
++	enable_clocks(1);
++	dispc_write_reg(DISPC_IRQENABLE, mask);
++	enable_clocks(0);
++
++	spin_unlock_irqrestore(&dispc.irq_lock, flags);
++}
++
 +int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
 +{
 +	int i;
-+	int ret = -EBUSY;
++	int ret;
 +	unsigned long flags;
-+	u32 new_mask = 0;
++	struct omap_dispc_isr_data *isr_data;
 +
 +	if (isr == NULL)
 +		return -EINVAL;
 +
 +	spin_lock_irqsave(&dispc.irq_lock, flags);
 +
++	/* check for duplicate entry */
 +	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
-+		if (registered_isr[i].isr == isr) {
++		isr_data = &dispc.registered_isr[i];
++		if (isr_data->isr == isr && isr_data->arg == arg &&
++				isr_data->mask == mask) {
 +			ret = -EINVAL;
-+			break;
++			goto err;
 +		}
++	}
 +
-+		if (registered_isr[i].isr != NULL)
-+			continue;
++	isr_data = NULL;
++	ret = -EBUSY;
 +
-+		registered_isr[i].isr = isr;
-+		registered_isr[i].arg = arg;
-+		registered_isr[i].mask = mask;
++	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
++		isr_data = &dispc.registered_isr[i];
 +
-+		enable_clocks(1);
-+		new_mask = dispc_read_reg(DISPC_IRQENABLE);
-+		new_mask |= mask;
-+		dispc_write_reg(DISPC_IRQENABLE, new_mask);
-+		enable_clocks(0);
++		if (isr_data->isr != NULL)
++			continue;
 +
++		isr_data->isr = isr;
++		isr_data->arg = arg;
++		isr_data->mask = mask;
 +		ret = 0;
++
 +		break;
 +	}
-+
++err:
 +	spin_unlock_irqrestore(&dispc.irq_lock, flags);
 +
++	if (ret == 0)
++		omap_dispc_set_irqs();
++
 +	return ret;
 +}
 +EXPORT_SYMBOL(omap_dispc_register_isr);
 +
-+int omap_dispc_unregister_isr(omap_dispc_isr_t isr)
++int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask)
 +{
-+	int i, j;
++	int i;
 +	unsigned long flags;
-+	u32 new_mask = DISPC_IRQ_MASK_ERROR;
 +	int ret = -EINVAL;
++	struct omap_dispc_isr_data *isr_data;
 +
 +	spin_lock_irqsave(&dispc.irq_lock, flags);
 +
 +	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
-+		if (registered_isr[i].isr != isr)
++		isr_data = &dispc.registered_isr[i];
++		if (isr_data->isr != isr || isr_data->arg != arg ||
++				isr_data->mask != mask)
 +			continue;
 +
-+		registered_isr[i].isr = NULL;
-+		registered_isr[i].arg = NULL;
-+		registered_isr[i].mask = 0;
++		/* found the correct isr */
 +
-+		for (j = 0; j < DISPC_MAX_NR_ISRS; j++)
-+			new_mask |= registered_isr[j].mask;
-+
-+		enable_clocks(1);
-+		dispc_write_reg(DISPC_IRQENABLE, new_mask);
-+		enable_clocks(0);
++		isr_data->isr = NULL;
++		isr_data->arg = NULL;
++		isr_data->mask = 0;
 +
 +		ret = 0;
 +		break;
@@ -2099,6 +4951,9 @@ index 0000000..20caa48
 +
 +	spin_unlock_irqrestore(&dispc.irq_lock, flags);
 +
++	if (ret == 0)
++		omap_dispc_set_irqs();
++
 +	return ret;
 +}
 +EXPORT_SYMBOL(omap_dispc_unregister_isr);
@@ -2106,7 +4961,7 @@ index 0000000..20caa48
 +#ifdef DEBUG
 +static void print_irq_status(u32 status)
 +{
-+	if ((status & DISPC_IRQ_MASK_ERROR) == 0)
++	if ((status & dispc.irq_error_mask) == 0)
 +		return;
 +
 +	printk(KERN_DEBUG "DISPC IRQ: 0x%x: ", status);
@@ -2134,8 +4989,9 @@ index 0000000..20caa48
 +{
 +	int i;
 +	u32 irqstatus = dispc_read_reg(DISPC_IRQSTATUS);
-+	static int errors;
 +	u32 handledirqs = 0;
++	u32 unhandled_errors;
++	struct omap_dispc_isr_data *isr_data;
 +
 +#ifdef DEBUG
 +	if (dss_debug)
@@ -2146,28 +5002,195 @@ index 0000000..20caa48
 +	dispc_write_reg(DISPC_IRQSTATUS, irqstatus);
 +
 +	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
-+		if (!registered_isr[i].isr)
++		isr_data = &dispc.registered_isr[i];
++
++		if (!isr_data->isr)
 +			continue;
-+		if (registered_isr[i].mask & irqstatus) {
-+			registered_isr[i].isr(registered_isr[i].arg,
-+					      irqstatus);
-+			handledirqs |= registered_isr[i].mask;
++
++		if (isr_data->mask & irqstatus) {
++			isr_data->isr(isr_data->arg, irqstatus);
++			handledirqs |= isr_data->mask;
++		}
++	}
++
++	unhandled_errors = irqstatus & ~handledirqs & dispc.irq_error_mask;
++
++	if (unhandled_errors) {
++		spin_lock(&dispc.error_lock);
++		dispc.error_irqs |= unhandled_errors;
++		spin_unlock(&dispc.error_lock);
++
++		dispc.irq_error_mask &= ~unhandled_errors;
++		omap_dispc_set_irqs();
++
++		schedule_work(&dispc.error_work);
++	}
++}
++
++static void dispc_error_worker(struct work_struct *work)
++{
++	int i;
++	u32 errors;
++	unsigned long flags;
++
++	spin_lock_irqsave(&dispc.error_lock, flags);
++	errors = dispc.error_irqs;
++	dispc.error_irqs = 0;
++	spin_unlock_irqrestore(&dispc.error_lock, flags);
++
++	if (errors & DISPC_IRQ_GFX_FIFO_UNDERFLOW) {
++		DSSERR("GFX_FIFO_UNDERFLOW, disabling GFX\n");
++		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++			struct omap_overlay *ovl;
++			ovl = omap_dss_get_overlay(i);
++
++			if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++				continue;
++
++			if (ovl->id == 0) {
++				dispc_enable_plane(ovl->id, 0);
++				dispc_go(ovl->manager->id);
++				mdelay(50);
++				break;
++			}
++		}
++	}
++
++	if (errors & DISPC_IRQ_VID1_FIFO_UNDERFLOW) {
++		DSSERR("VID1_FIFO_UNDERFLOW, disabling VID1\n");
++		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++			struct omap_overlay *ovl;
++			ovl = omap_dss_get_overlay(i);
++
++			if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++				continue;
++
++			if (ovl->id == 1) {
++				dispc_enable_plane(ovl->id, 0);
++				dispc_go(ovl->manager->id);
++				mdelay(50);
++				break;
++			}
++		}
++	}
++
++	if (errors & DISPC_IRQ_VID2_FIFO_UNDERFLOW) {
++		DSSERR("VID2_FIFO_UNDERFLOW, disabling VID2\n");
++		for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++			struct omap_overlay *ovl;
++			ovl = omap_dss_get_overlay(i);
++
++			if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++				continue;
++
++			if (ovl->id == 2) {
++				dispc_enable_plane(ovl->id, 0);
++				dispc_go(ovl->manager->id);
++				mdelay(50);
++				break;
++			}
++		}
++	}
++
++	if (errors & DISPC_IRQ_SYNC_LOST) {
++		DSSERR("SYNC_LOST, disabling LCD\n");
++		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++			struct omap_overlay_manager *mgr;
++			mgr = omap_dss_get_overlay_manager(i);
++
++			if (mgr->id == OMAP_DSS_CHANNEL_LCD) {
++				mgr->display->disable(mgr->display);
++				break;
++			}
 +		}
 +	}
 +
-+	if (irqstatus & ~handledirqs & DISPC_IRQ_MASK_ERROR) {
-+		if (printk_ratelimit()) {
-+			DSSERR("dispc irq error status %04x\n",
-+			       irqstatus);
++	if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) {
++		DSSERR("SYNC_LOST_DIGIT, disabling TV\n");
++		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++			struct omap_overlay_manager *mgr;
++			mgr = omap_dss_get_overlay_manager(i);
++
++			if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) {
++				mgr->display->disable(mgr->display);
++				break;
++			}
 +		}
-+		if (errors++ > 100) {
-+			DSSERR("Excessive DISPC errors\n"
-+					"Turning off lcd and digit\n");
-+			dispc_enable_lcd_out(0);
-+			dispc_enable_digit_out(0);
++	}
++
++	if (errors & DISPC_IRQ_OCP_ERR) {
++		DSSERR("OCP_ERR\n");
++		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++			struct omap_overlay_manager *mgr;
++			mgr = omap_dss_get_overlay_manager(i);
++
++			if (mgr->caps & OMAP_DSS_OVL_CAP_DISPC)
++				mgr->display->disable(mgr->display);
 +		}
 +	}
 +
++	dispc.irq_error_mask |= errors;
++	omap_dispc_set_irqs();
++}
++
++int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout)
++{
++	void dispc_irq_wait_handler(void *data, u32 mask)
++	{
++		complete((struct completion *)data);
++	}
++
++	int r;
++	DECLARE_COMPLETION_ONSTACK(completion);
++
++	r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
++			irqmask);
++
++	if (r)
++		return r;
++
++	timeout = wait_for_completion_timeout(&completion, timeout);
++
++	omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
++
++	if (timeout == 0)
++		return -ETIMEDOUT;
++
++	if (timeout == -ERESTARTSYS)
++		return -ERESTARTSYS;
++
++	return 0;
++}
++
++int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
++		unsigned long timeout)
++{
++	void dispc_irq_wait_handler(void *data, u32 mask)
++	{
++		complete((struct completion *)data);
++	}
++
++	int r;
++	DECLARE_COMPLETION_ONSTACK(completion);
++
++	r = omap_dispc_register_isr(dispc_irq_wait_handler, &completion,
++			irqmask);
++
++	if (r)
++		return r;
++
++	timeout = wait_for_completion_interruptible_timeout(&completion,
++			timeout);
++
++	omap_dispc_unregister_isr(dispc_irq_wait_handler, &completion, irqmask);
++
++	if (timeout == 0)
++		return -ETIMEDOUT;
++
++	if (timeout == -ERESTARTSYS)
++		return -ERESTARTSYS;
++
++	return 0;
 +}
 +
 +#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
@@ -2177,26 +5200,29 @@ index 0000000..20caa48
 +	int i;
 +
 +	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
-+		if (!registered_isr[i].isr)
++		struct omap_dispc_isr_data *isr_data;
++		isr_data = &dispc.registered_isr[i];
++
++		if (!isr_data->isr)
 +			continue;
-+		if (registered_isr[i].mask & irqstatus)
-+			registered_isr[i].isr(registered_isr[i].arg,
-+					      irqstatus);
++
++		if (isr_data->mask & irqstatus)
++			isr_data->isr(isr_data->arg, irqstatus);
 +	}
 +}
 +#endif
 +
 +static void _omap_dispc_initialize_irq(void)
 +{
-+	memset(registered_isr, 0, sizeof(registered_isr));
++	memset(dispc.registered_isr, 0, sizeof(dispc.registered_isr));
++
++	dispc.irq_error_mask = DISPC_IRQ_MASK_ERROR;
 +
 +	/* there's SYNC_LOST_DIGIT waiting after enabling the DSS,
 +	 * so clear it */
-+	dispc_write_reg(DISPC_IRQSTATUS,
-+			dispc_read_reg(DISPC_IRQSTATUS));
++	dispc_write_reg(DISPC_IRQSTATUS, dispc_read_reg(DISPC_IRQSTATUS));
 +
-+	/* We'll handle these always */
-+	dispc_write_reg(DISPC_IRQENABLE, DISPC_IRQ_MASK_ERROR);
++	omap_dispc_set_irqs();
 +}
 +
 +static void _omap_dispc_initial_config(void)
@@ -2214,14 +5240,12 @@ index 0000000..20caa48
 +	REG_FLD_MOD(DISPC_CONFIG, 1, 9, 9);
 +
 +	/* L3 firewall setting: enable access to OCM RAM */
-+	__raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
++	if (cpu_is_omap24xx())
++		__raw_writel(0x402000b0, IO_ADDRESS(0x680050a0));
 +
 +	_dispc_setup_color_conv_coef();
 +
 +	dispc_set_loadmode(OMAP_DSS_LOAD_FRAME_ONLY);
-+
-+	/* Set logic clock to fck, pixel clock to fck/2 for now */
-+	dispc_set_lcd_divisor(1, 2);
 +}
 +
 +int dispc_init(void)
@@ -2229,6 +5253,9 @@ index 0000000..20caa48
 +	u32 rev;
 +
 +	spin_lock_init(&dispc.irq_lock);
++	spin_lock_init(&dispc.error_lock);
++
++	INIT_WORK(&dispc.error_work, dispc_error_worker);
 +
 +	dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
 +	if (!dispc.base) {
@@ -2268,7 +5295,7 @@ index 0000000..20caa48
 +	iounmap(dispc.base);
 +}
 +
-+int dispc_enable_plane(enum omap_plane plane, int enable)
++int dispc_enable_plane(enum omap_plane plane, bool enable)
 +{
 +	DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
 +
@@ -2280,21 +5307,23 @@ index 0000000..20caa48
 +}
 +
 +int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out,
-+		       u32 paddr, int screen_width,
-+		       int pos_x, int pos_y,
-+		       int width, int height,
-+		       int out_width, int out_height,
++		       u32 paddr, u16 screen_width,
++		       u16 pos_x, u16 pos_y,
++		       u16 width, u16 height,
++		       u16 out_width, u16 out_height,
 +		       enum omap_color_mode color_mode,
-+		       int ilace)
++		       bool ilace,
++		       u8 rotation, bool mirror)
 +{
 +	int r = 0;
 +
-+	DSSDBG("dispc_setup_plane %d, %x, sw %d, %d,%d, %dx%d -> "
-+	       "%dx%d, (ilace %d)\n",
-+	       plane, paddr, screen_width, pos_x, pos_y,
++	DSSDBG("dispc_setup_plane %d, ch %d, pa %x, sw %d, %d,%d, %dx%d -> "
++	       "%dx%d, ilace %d, cmode %x, rot %d, mir %d\n",
++	       plane, channel_out, paddr, screen_width, pos_x, pos_y,
 +	       width, height,
 +	       out_width, out_height,
-+	       ilace);
++	       ilace, color_mode,
++	       rotation, mirror);
 +
 +	enable_clocks(1);
 +
@@ -2303,7 +5332,8 @@ index 0000000..20caa48
 +			   pos_x, pos_y,
 +			   width, height,
 +			   out_width, out_height,
-+			   color_mode, ilace);
++			   color_mode, ilace,
++			   rotation, mirror);
 +
 +	enable_clocks(0);
 +
@@ -2341,7 +5371,7 @@ index 0000000..20caa48
 +
 +/* returns the area that needs updating */
 +void dispc_setup_partial_planes(struct omap_display *display,
-+				    int *xi, int *yi, int *wi, int *hi)
++				    u16 *xi, u16 *yi, u16 *wi, u16 *hi)
 +{
 +	struct omap_overlay_manager *mgr;
 +	int i;
@@ -2367,7 +5397,7 @@ index 0000000..20caa48
 +	for (i = 0; i < mgr->num_overlays; i++) {
 +		struct omap_overlay *ovl;
 +		struct omap_overlay_info *pi;
-+		ovl = &mgr->overlays[i];
++		ovl = mgr->overlays[i];
 +
 +		if (ovl->manager != mgr)
 +			continue;
@@ -2425,7 +5455,7 @@ index 0000000..20caa48
 +	}
 +
 +	for (i = 0; i < mgr->num_overlays; i++) {
-+		struct omap_overlay *ovl = &mgr->overlays[i];
++		struct omap_overlay *ovl = mgr->overlays[i];
 +		struct omap_overlay_info *pi = &ovl->info;
 +
 +		int px = pi->pos_x;
@@ -2456,6 +5486,9 @@ index 0000000..20caa48
 +
 +		switch (pi->color_mode) {
 +		case OMAP_DSS_COLOR_RGB16:
++		case OMAP_DSS_COLOR_ARGB16:
++		case OMAP_DSS_COLOR_YUV2:
++		case OMAP_DSS_COLOR_UYVY:
 +			bpp = 16;
 +			break;
 +
@@ -2464,14 +5497,12 @@ index 0000000..20caa48
 +			break;
 +
 +		case OMAP_DSS_COLOR_RGB24U:
++		case OMAP_DSS_COLOR_ARGB32:
++		case OMAP_DSS_COLOR_RGBA32:
++		case OMAP_DSS_COLOR_RGBX32:
 +			bpp = 32;
 +			break;
 +
-+		case OMAP_DSS_COLOR_YUV2:
-+		case OMAP_DSS_COLOR_UYVY:
-+			bpp = 16;
-+			break;
-+
 +		default:
 +			BUG();
 +			return;
@@ -2514,7 +5545,9 @@ index 0000000..20caa48
 +				px, py,
 +				pw, ph,
 +				pow, poh,
-+				pi->color_mode, 0);
++				pi->color_mode, 0,
++				pi->rotation, // XXX rotation probably wrong
++				pi->mirror);
 +
 +		dispc_enable_plane(ovl->id, 1);
 +	}
@@ -2526,16 +5559,16 @@ index 0000000..20caa48
 +
 +}
 +
-diff --git a/arch/arm/plat-omap/dss/display.c b/arch/arm/plat-omap/dss/display.c
+diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
 new file mode 100644
-index 0000000..e3ff778
+index 0000000..9aaf392
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/display.c
-@@ -0,0 +1,787 @@
++++ b/drivers/video/omap2/dss/display.c
+@@ -0,0 +1,693 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/display.c
++ * linux/drivers/video/omap2/dss/display.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * Some code and ideas taken from drivers/video/omap/ driver
@@ -2557,631 +5590,541 @@ index 0000000..e3ff778
 +#define DSS_SUBSYS_NAME "DISPLAY"
 +
 +#include <linux/kernel.h>
-+#include <linux/io.h>
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/sysfs.h>
-+#include <linux/clk.h>
++#include <linux/module.h>
++#include <linux/jiffies.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
 +
 +#include <mach/display.h>
-+#include <mach/clock.h>
 +#include "dss.h"
 +
-+#define DSS_MAX_DISPLAYS                8
-+
 +static int num_displays;
-+static struct omap_display displays[DSS_MAX_DISPLAYS];
++static LIST_HEAD(display_list);
 +
-+static ssize_t show_clk(struct device *dev, struct device_attribute *attr,
-+		char *buf)
++static ssize_t display_name_show(struct omap_display *display, char *buf)
 +{
-+	ssize_t l, size = PAGE_SIZE;
-+
-+	l = 0;
++	return snprintf(buf, PAGE_SIZE, "%s\n", display->name);
++}
 +
-+	l += dss_print_clocks(buf + l, size - l);
++static ssize_t display_enabled_show(struct omap_display *display, char *buf)
++{
++	bool enabled = display->state != OMAP_DSS_DISPLAY_DISABLED;
 +
-+	l += dispc_print_clocks(buf + l, size - l);
-+#ifdef CONFIG_OMAP2_DSS_DSI
-+	l += dsi_print_clocks(buf + l, size - l);
-+#endif
-+	return l;
++	return snprintf(buf, PAGE_SIZE, "%d\n", enabled);
 +}
 +
-+static DEVICE_ATTR(clk, S_IRUGO, show_clk, NULL);
-+
-+int initialize_sysfs(struct device *dev)
++static ssize_t display_enabled_store(struct omap_display *display,
++		const char *buf, size_t size)
 +{
-+	int r;
++	bool enabled, r;
 +
-+	r = device_create_file(dev, &dev_attr_clk);
-+	if (r)
-+		DSSERR("failed to create sysfs clk file\n");
++	enabled = simple_strtoul(buf, NULL, 10);
 +
-+	return r;
++	if (enabled != (display->state != OMAP_DSS_DISPLAY_DISABLED)) {
++		if (enabled) {
++			r = display->enable(display);
++			if (r)
++				return r;
++		} else {
++			display->disable(display);
++		}
++	}
++
++	return size;
 +}
 +
-+void uninitialize_sysfs(struct device *dev)
++static ssize_t display_upd_mode_show(struct omap_display *display, char *buf)
 +{
-+	device_remove_file(dev, &dev_attr_clk);
++	enum omap_dss_update_mode mode = OMAP_DSS_UPDATE_AUTO;
++	if (display->get_update_mode)
++		mode = display->get_update_mode(display);
++	return snprintf(buf, PAGE_SIZE, "%d\n", mode);
 +}
 +
-+void initialize_displays(struct omap_dss_platform_data *pdata)
++static ssize_t display_upd_mode_store(struct omap_display *display,
++		const char *buf, size_t size)
 +{
-+	int i;
-+
-+	num_displays = 0;
-+
-+	BUG_ON(pdata->num_displays > DSS_MAX_DISPLAYS);
-+
-+	for (i = 0; i < pdata->num_displays; ++i) {
-+		struct omap_display *display = &displays[i];
++	int val, r;
++	enum omap_dss_update_mode mode;
 +
-+		/*atomic_set(&display->ref_count, 0);*/
-+		display->ref_count = 0;
++	val = simple_strtoul(buf, NULL, 10);
 +
-+		display->hw_config = *pdata->displays[i];
-+		display->type = pdata->displays[i]->type;
-+		display->name = pdata->displays[i]->name;
-+
-+		switch (display->type) {
-+
-+		case OMAP_DISPLAY_TYPE_DPI:
-+			dpi_init_display(display);
-+			break;
-+#ifdef CONFIG_OMAP2_DSS_RFBI
-+		case OMAP_DISPLAY_TYPE_DBI:
-+			rfbi_init_display(display);
++	switch (val) {
++		case OMAP_DSS_UPDATE_DISABLED:
++		case OMAP_DSS_UPDATE_AUTO:
++		case OMAP_DSS_UPDATE_MANUAL:
++			mode = (enum omap_dss_update_mode)val;
 +			break;
-+#endif
-+#ifdef CONFIG_OMAP2_DSS_VENC
-+		case OMAP_DISPLAY_TYPE_VENC:
-+			venc_init_display(display);
-+			break;
-+#endif
-+#ifdef CONFIG_OMAP2_DSS_SDI
-+		case OMAP_DISPLAY_TYPE_SDI:
-+			sdi_init_display(display);
-+			break;
-+#endif
-+#ifdef CONFIG_OMAP2_DSS_DSI
-+		case OMAP_DISPLAY_TYPE_DSI:
-+			dsi_init_display(display);
-+			break;
-+#endif
-+
 +		default:
-+			DSSERR("Support for display '%s' not compiled in.\n",
-+					display->name);
-+			continue;
-+		}
-+
-+		num_displays++;
++			return -EINVAL;
 +	}
++
++	if ((r = display->set_update_mode(display, mode)))
++		return r;
++
++	return size;
 +}
 +
-+static int check_overlay(struct omap_overlay *ovl,
-+		struct omap_display *display)
++static ssize_t display_tear_show(struct omap_display *display, char *buf)
 +{
-+	struct omap_overlay_info *info;
-+	int outw, outh;
++	return snprintf(buf, PAGE_SIZE, "%d\n",
++			display->get_te ? display->get_te(display) : 0);
++}
 +
-+	if (!display)
-+		return 0;
++static ssize_t display_tear_store(struct omap_display *display,
++		const char *buf, size_t size)
++{
++	unsigned long te;
++	int r;
 +
-+	if (!ovl->info.enabled)
-+		return 0;
++	if (!display->enable_te || !display->get_te)
++		return -ENOENT;
 +
-+	info = &ovl->info;
++	te = simple_strtoul(buf, NULL, 0);
 +
-+	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
-+		outw = info->width;
-+		outh = info->height;
-+	} else {
-+		if (info->out_width == 0)
-+			outw = info->width;
-+		else
-+			outw = info->out_width;
++	if ((r = display->enable_te(display, te)))
++		return r;
 +
-+		if (info->out_height == 0)
-+			outh = info->height;
-+		else
-+			outh = info->out_height;
-+	}
++	return size;
++}
 +
-+	if (display->panel->timings.x_res < info->pos_x + outw)
-+		return -EINVAL;
++static ssize_t display_timings_show(struct omap_display *display, char *buf)
++{
++	struct omap_video_timings t;
 +
-+	if (display->panel->timings.y_res < info->pos_y + outh)
-+		return -EINVAL;
++	if (!display->get_timings)
++		return -ENOENT;
 +
-+	return 0;
-+}
++	display->get_timings(display, &t);
 +
++	return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
++			t.pixel_clock,
++			t.x_res, t.hfp, t.hbp, t.hsw,
++			t.y_res, t.vfp, t.vbp, t.vsw);
++}
 +
-+static int omap_dss_set_manager(struct omap_overlay *ovl,
-+		struct omap_overlay_manager *mgr)
++static ssize_t display_timings_store(struct omap_display *display,
++		const char *buf, size_t size)
 +{
-+	int r;
++	struct omap_video_timings t;
++	int r, found;
 +
-+	if (ovl->manager) {
-+		DSSERR("overlay '%s' already has a manager '%s'\n",
-+				ovl->name, ovl->manager->name);
++	if (!display->set_timings || !display->check_timings)
++		return -ENOENT;
++
++	found = 0;
++#ifdef CONFIG_OMAP2_DSS_VENC
++	if (strncmp("pal", buf, 3) == 0) {
++		t = omap_dss_pal_timings;
++		found = 1;
++	} else if (strncmp("ntsc", buf, 4) == 0) {
++		t = omap_dss_ntsc_timings;
++		found = 1;
 +	}
++#endif
++	if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu",
++				&t.pixel_clock,
++				&t.x_res, &t.hfp, &t.hbp, &t.hsw,
++				&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
++		return -EINVAL;
 +
-+	r = check_overlay(ovl, mgr->display);
-+	if (r)
++	if ((r = display->check_timings(display, &t)))
 +		return r;
 +
-+	ovl->manager = mgr;
++	display->set_timings(display, &t);
 +
-+	return 0;
++	return size;
 +}
 +
-+static int omap_dss_unset_manager(struct omap_overlay *ovl)
++static ssize_t display_rotate_show(struct omap_display *display, char *buf)
 +{
-+	if (!ovl->manager) {
-+		DSSERR("failed to detach overlay: manager not set\n");
-+		return -EINVAL;
-+	}
-+
-+	ovl->manager = NULL;
-+
-+	return 0;
++	int rotate;
++	if (!display->get_rotate)
++		return -ENOENT;
++	rotate = display->get_rotate(display);
++	return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
 +}
 +
-+static int omap_dss_set_display(struct omap_overlay_manager *mgr,
-+		struct omap_display *display)
++static ssize_t display_rotate_store(struct omap_display *display,
++		const char *buf, size_t size)
 +{
-+	int i;
++	unsigned long rot;
 +	int r;
 +
-+	if (display->manager) {
-+		DSSERR("display '%s' already has a manager '%s'\n",
-+			       display->name, display->manager->name);
-+		return -EINVAL;
-+	}
-+
-+	if ((mgr->supported_displays & display->type) == 0) {
-+		DSSERR("display '%s' does not support manager '%s'\n",
-+			       display->name, mgr->name);
-+		return -EINVAL;
-+	}
-+
-+	for (i = 0; i < mgr->num_overlays; i++) {
-+		struct omap_overlay *ovl = &mgr->overlays[i];
-+
-+		if (ovl->manager != mgr || !ovl->info.enabled)
-+			continue;
++	if (!display->set_rotate || !display->get_rotate)
++		return -ENOENT;
 +
-+		r = check_overlay(ovl, display);
-+		if (r)
-+			return r;
-+	}
++	rot = simple_strtoul(buf, NULL, 0);
 +
-+	display->manager = mgr;
-+	mgr->display = display;
++	if ((r = display->set_rotate(display, rot)))
++		return r;
 +
-+	return 0;
++	return size;
 +}
 +
-+static int omap_dss_unset_display(struct omap_overlay_manager *mgr)
++static ssize_t display_mirror_show(struct omap_display *display, char *buf)
 +{
-+	if (!mgr->display) {
-+		DSSERR("failed to unset display, display not set.\n");
-+		return -EINVAL;
-+	}
-+
-+	mgr->display->manager = NULL;
-+	mgr->display = NULL;
-+
-+	return 0;
++	int mirror;
++	if (!display->get_mirror)
++		return -ENOENT;
++	mirror = display->get_mirror(display);
++	return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
 +}
 +
-+static int omap_dss_setup_overlay_input(struct omap_overlay *ovl,
-+		u32 paddr, void *vaddr, int screen_width,
-+		int width, int height,
-+		enum omap_color_mode color_mode)
++static ssize_t display_mirror_store(struct omap_display *display,
++		const char *buf, size_t size)
 +{
++	unsigned long mirror;
 +	int r;
-+	struct omap_overlay_info old_info;
 +
-+	if ((ovl->supported_modes & color_mode) == 0) {
-+		DSSERR("overlay doesn't support mode %d\n", color_mode);
-+		return -EINVAL;
-+	}
++	if (!display->set_mirror || !display->get_mirror)
++		return -ENOENT;
 +
-+	old_info = ovl->info;
-+
-+	ovl->info.paddr = paddr;
-+	ovl->info.vaddr = vaddr;
-+	ovl->info.screen_width = screen_width;
++	mirror = simple_strtoul(buf, NULL, 0);
 +
-+	ovl->info.width = width;
-+	ovl->info.height = height;
-+	ovl->info.color_mode = color_mode;
++	if ((r = display->set_mirror(display, mirror)))
++		return r;
 +
-+	if (ovl->manager) {
-+		r = check_overlay(ovl, ovl->manager->display);
-+		if (r) {
-+			ovl->info = old_info;
-+			return r;
-+		}
-+	}
++	return size;
++}
 +
-+	return 0;
++static ssize_t display_panel_name_show(struct omap_display *display, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%s\n",
++			display->panel ? display->panel->name : "");
 +}
 +
-+static int omap_dss_setup_overlay_output(struct omap_overlay *ovl,
-+		int pos_x, int pos_y,
-+		int out_width, int out_height)
++static ssize_t display_ctrl_name_show(struct omap_display *display, char *buf)
 +{
-+	int r;
-+	struct omap_overlay_info old_info;
++	return snprintf(buf, PAGE_SIZE, "%s\n",
++			display->ctrl ? display->ctrl->name : "");
++}
 +
-+	old_info = ovl->info;
++struct display_attribute {
++	struct attribute attr;
++	ssize_t (*show)(struct omap_display *, char *);
++	ssize_t	(*store)(struct omap_display *, const char *, size_t);
++};
 +
-+	ovl->info.pos_x = pos_x;
-+	ovl->info.pos_y = pos_y;
-+	ovl->info.out_width = out_width;
-+	ovl->info.out_height = out_height;
++#define DISPLAY_ATTR(_name, _mode, _show, _store) \
++	struct display_attribute display_attr_##_name = \
++	__ATTR(_name, _mode, _show, _store)
++
++static DISPLAY_ATTR(name, S_IRUGO, display_name_show, NULL);
++static DISPLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
++		display_enabled_show, display_enabled_store);
++static DISPLAY_ATTR(update_mode, S_IRUGO|S_IWUSR,
++		display_upd_mode_show, display_upd_mode_store);
++static DISPLAY_ATTR(tear_elim, S_IRUGO|S_IWUSR,
++		display_tear_show, display_tear_store);
++static DISPLAY_ATTR(timings, S_IRUGO|S_IWUSR,
++		display_timings_show, display_timings_store);
++static DISPLAY_ATTR(rotate, S_IRUGO|S_IWUSR,
++		display_rotate_show, display_rotate_store);
++static DISPLAY_ATTR(mirror, S_IRUGO|S_IWUSR,
++		display_mirror_show, display_mirror_store);
++static DISPLAY_ATTR(panel_name, S_IRUGO, display_panel_name_show, NULL);
++static DISPLAY_ATTR(ctrl_name, S_IRUGO, display_ctrl_name_show, NULL);
++
++static struct attribute *display_sysfs_attrs[] = {
++	&display_attr_name.attr,
++	&display_attr_enabled.attr,
++	&display_attr_update_mode.attr,
++	&display_attr_tear_elim.attr,
++	&display_attr_timings.attr,
++	&display_attr_rotate.attr,
++	&display_attr_mirror.attr,
++	&display_attr_panel_name.attr,
++	&display_attr_ctrl_name.attr,
++	NULL
++};
 +
-+	if (ovl->manager) {
-+		r = check_overlay(ovl, ovl->manager->display);
-+		if (r) {
-+			ovl->info = old_info;
-+			return r;
-+		}
-+	}
++static ssize_t display_attr_show(struct kobject *kobj, struct attribute *attr, char *buf)
++{
++	struct omap_display *display;
++	struct display_attribute *display_attr;
 +
-+	return 0;
++	display = container_of(kobj, struct omap_display, kobj);
++	display_attr = container_of(attr, struct display_attribute, attr);
++
++	if (!display_attr->show)
++		return -ENOENT;
++
++	return display_attr->show(display, buf);
 +}
 +
-+static int omap_dss_enable_overlay(struct omap_overlay *ovl, int enable)
++static ssize_t display_attr_store(struct kobject *kobj, struct attribute *attr,
++		const char *buf, size_t size)
 +{
-+	struct omap_overlay_info old_info;
-+	int r;
++	struct omap_display *display;
++	struct display_attribute *display_attr;
 +
-+	old_info = ovl->info;
++	display = container_of(kobj, struct omap_display, kobj);
++	display_attr = container_of(attr, struct display_attribute, attr);
 +
-+	ovl->info.enabled = enable ? 1 : 0;
++	if (!display_attr->store)
++		return -ENOENT;
 +
-+	if (ovl->manager) {
-+		r = check_overlay(ovl, ovl->manager->display);
-+		if (r) {
-+			ovl->info = old_info;
-+			return r;
-+		}
-+	}
-+
-+	return 0;
++	return display_attr->store(display, buf, size);
 +}
 +
++static struct sysfs_ops display_sysfs_ops = {
++	.show = display_attr_show,
++	.store = display_attr_store,
++};
 +
-+static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
-+{
-+	int i;
-+	int r = 0;
++static struct kobj_type display_ktype = {
++	.sysfs_ops = &display_sysfs_ops,
++	.default_attrs = display_sysfs_attrs,
++};
 +
-+	DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name);
++static void default_get_resolution(struct omap_display *display,
++			u16 *xres, u16 *yres)
++{
++	*xres = display->panel->timings.x_res;
++	*yres = display->panel->timings.y_res;
++}
 +
-+	if (!mgr->display) {
-+		DSSDBG("no display, aborting apply\n");
-+		return 0;
-+	}
++static void default_configure_overlay(struct omap_overlay *ovl)
++{
++	unsigned low, high, size;
++	enum omap_burst_size burst;
++	enum omap_plane plane = ovl->id;
 +
-+	/* on a manual update display update() handles configuring
-+	 * planes */
-+	if (mgr->display->get_update_mode) {
-+		enum omap_dss_update_mode mode;
-+		mode = mgr->display->get_update_mode(mgr->display);
-+		if (mode == OMAP_DSS_UPDATE_MANUAL)
-+			return 0;
-+	}
++	burst = OMAP_DSS_BURST_16x32;
++	size = 16 * 32 / 8;
 +
-+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++	dispc_set_burst_size(plane, burst);
 +
-+	for (i = 0; i < mgr->num_overlays; i++) {
-+		int ilace = 0;
-+		int outw, outh;
++	high = dispc_get_plane_fifo_size(plane) - 1;
++	low = dispc_get_plane_fifo_size(plane) - size;
 +
-+		struct omap_overlay *ovl = &mgr->overlays[i];
++	dispc_setup_plane_fifo(plane, low, high);
++}
 +
-+		if (!ovl->manager) {
-+			dispc_enable_plane(ovl->id, 0);
-+			continue;
-+		}
++static int default_wait_vsync(struct omap_display *display)
++{
++	unsigned long timeout = msecs_to_jiffies(500);
++	u32 irq;
 +
-+		if (ovl->manager != mgr)
-+			continue;
++	if (display->type == OMAP_DISPLAY_TYPE_VENC)
++		irq = DISPC_IRQ_EVSYNC_ODD;
++	else
++		irq = DISPC_IRQ_VSYNC;
 +
-+		if (!ovl->info.enabled) {
-+			dispc_enable_plane(ovl->id, 0);
-+			continue;
-+		}
++	return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
++}
 +
-+		if (mgr->display->type == OMAP_DISPLAY_TYPE_VENC)
-+			ilace = 1;
++static int default_get_recommended_bpp(struct omap_display *display)
++{
++	if (display->panel->recommended_bpp)
++		return display->panel->recommended_bpp;
 +
-+		if (ovl->info.out_width == 0)
-+			outw = ovl->info.width;
++	switch (display->type) {
++	case OMAP_DISPLAY_TYPE_DPI:
++		if (display->hw_config.u.dpi.data_lines == 24)
++			return 24;
 +		else
-+			outw = ovl->info.out_width;
++			return 16;
 +
-+		if (ovl->info.out_height == 0)
-+			outh = ovl->info.height;
++	case OMAP_DISPLAY_TYPE_DBI:
++	case OMAP_DISPLAY_TYPE_DSI:
++		if (display->ctrl->pixel_size == 24)
++			return 24;
 +		else
-+			outh = ovl->info.out_height;
-+
-+		r = dispc_setup_plane(ovl->id, ovl->manager->id,
-+				ovl->info.paddr,
-+				ovl->info.screen_width,
-+				ovl->info.pos_x,
-+				ovl->info.pos_y,
-+				ovl->info.width,
-+				ovl->info.height,
-+				outw,
-+				outh,
-+				ovl->info.color_mode,
-+				ilace);
-+
-+		if (r) {
-+			DSSERR("dispc_setup_plane failed\n");
-+			goto exit;
-+		}
-+
-+		dispc_enable_plane(ovl->id, 1);
++			return 16;
++	case OMAP_DISPLAY_TYPE_VENC:
++	case OMAP_DISPLAY_TYPE_SDI:
++		return 24;
++		return 24;
++	default:
++		BUG();
 +	}
-+
-+	dispc_go(mgr->id);
-+
-+exit:
-+	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-+
-+	return r;
 +}
 +
-+static struct omap_overlay dispc_overlays[] = {
-+	{
-+		.name = "gfx",
-+		.id = OMAP_DSS_GFX,
-+		.set_manager = &omap_dss_set_manager,
-+		.unset_manager = &omap_dss_unset_manager,
-+		.setup_input = &omap_dss_setup_overlay_input,
-+		.setup_output = &omap_dss_setup_overlay_output,
-+		.enable = &omap_dss_enable_overlay,
-+		.supported_modes = OMAP_DSS_COLOR_GFX_OMAP3,
-+	},
-+	{
-+		.name = "vid1",
-+		.id = OMAP_DSS_VIDEO1,
-+		.set_manager = &omap_dss_set_manager,
-+		.unset_manager = &omap_dss_unset_manager,
-+		.setup_input = &omap_dss_setup_overlay_input,
-+		.setup_output = &omap_dss_setup_overlay_output,
-+		.enable = &omap_dss_enable_overlay,
-+		.supported_modes = OMAP_DSS_COLOR_VID_OMAP3,
-+		.caps = OMAP_DSS_OVL_CAP_SCALE,
-+	},
-+	{
-+		.name = "vid2",
-+		.id = OMAP_DSS_VIDEO2,
-+		.set_manager = &omap_dss_set_manager,
-+		.unset_manager = &omap_dss_unset_manager,
-+		.setup_input = &omap_dss_setup_overlay_input,
-+		.setup_output = &omap_dss_setup_overlay_output,
-+		.enable = &omap_dss_enable_overlay,
-+		.supported_modes = OMAP_DSS_COLOR_VID_OMAP3,
-+		.caps = OMAP_DSS_OVL_CAP_SCALE,
-+	},
-+};
++void dss_init_displays(struct platform_device *pdev)
++{
++	struct omap_dss_board_info *pdata = pdev->dev.platform_data;
++	int i, r;
 +
-+static struct omap_overlay_manager dispc_overlay_managers[] =
-+{
-+	[OMAP_DSS_OVL_MGR_LCD] = {
-+		.name = "lcd",
-+		.id = OMAP_DSS_CHANNEL_LCD,
-+		.num_overlays = 3,
-+		.overlays = dispc_overlays,
-+		.set_display = &omap_dss_set_display,
-+		.unset_display = &omap_dss_unset_display,
-+		.apply = &omap_dss_mgr_apply,
-+		.caps = OMAP_DSS_OVL_MGR_CAP_DISPC,
-+		.supported_displays =
-+			OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
-+			OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI,
-+	},
-+	[OMAP_DSS_OVL_MGR_TV] = {
-+		.name = "tv",
-+		.id = OMAP_DSS_CHANNEL_DIGIT,
-+		.num_overlays = 3,
-+		.overlays = dispc_overlays,
-+		.set_display = &omap_dss_set_display,
-+		.unset_display = &omap_dss_unset_display,
-+		.apply = &omap_dss_mgr_apply,
-+		.caps = OMAP_DSS_OVL_MGR_CAP_DISPC,
-+		.supported_displays = OMAP_DISPLAY_TYPE_VENC,
-+	},
-+};
++	INIT_LIST_HEAD(&display_list);
 +
-+static int num_overlays = 3;
++	num_displays = 0;
 +
-+static struct omap_overlay *omap_dss_overlays[10] = {
-+	&dispc_overlays[0],
-+	&dispc_overlays[1],
-+	&dispc_overlays[2],
-+};
++	for (i = 0; i < pdata->num_displays; ++i) {
++		struct omap_display *display;
 +
-+static int num_overlay_managers = 2;
++		switch (pdata->displays[i]->type) {
++		case OMAP_DISPLAY_TYPE_DPI:
++#ifdef CONFIG_OMAP2_DSS_RFBI
++		case OMAP_DISPLAY_TYPE_DBI:
++#endif
++#ifdef CONFIG_OMAP2_DSS_SDI
++		case OMAP_DISPLAY_TYPE_SDI:
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++		case OMAP_DISPLAY_TYPE_DSI:
++#endif
++#ifdef CONFIG_OMAP2_DSS_VENC
++		case OMAP_DISPLAY_TYPE_VENC:
++#endif
++			break;
++		default:
++			DSSERR("Support for display '%s' not compiled in.\n",
++					pdata->displays[i]->name);
++			continue;
++		}
 +
-+static struct omap_overlay_manager *omap_dss_overlay_managers[10] = {
-+	&dispc_overlay_managers[0],
-+	&dispc_overlay_managers[1],
-+};
++		display = kzalloc(sizeof(*display), GFP_KERNEL);
 +
++		/*atomic_set(&display->ref_count, 0);*/
++		display->ref_count = 0;
 +
-+static void omap_dss_add_overlay(struct omap_overlay *overlay)
-+{
-+	int i = num_overlays++;
++		display->hw_config = *pdata->displays[i];
++		display->type = pdata->displays[i]->type;
++		display->name = pdata->displays[i]->name;
 +
-+	omap_dss_overlays[i] = overlay;
-+}
++		display->get_resolution = default_get_resolution;
++		display->get_recommended_bpp = default_get_recommended_bpp;
++		display->configure_overlay = default_configure_overlay;
++		display->wait_vsync = default_wait_vsync;
 +
-+static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
-+{
-+	int i = num_overlay_managers++;
-+	omap_dss_overlay_managers[i] = manager;
-+}
++		switch (display->type) {
++		case OMAP_DISPLAY_TYPE_DPI:
++			dpi_init_display(display);
++			break;
++#ifdef CONFIG_OMAP2_DSS_RFBI
++		case OMAP_DISPLAY_TYPE_DBI:
++			rfbi_init_display(display);
++			break;
++#endif
++#ifdef CONFIG_OMAP2_DSS_VENC
++		case OMAP_DISPLAY_TYPE_VENC:
++			venc_init_display(display);
++			break;
++#endif
++#ifdef CONFIG_OMAP2_DSS_SDI
++		case OMAP_DISPLAY_TYPE_SDI:
++			sdi_init_display(display);
++			break;
++#endif
++#ifdef CONFIG_OMAP2_DSS_DSI
++		case OMAP_DISPLAY_TYPE_DSI:
++			dsi_init_display(display);
++			break;
++#endif
++		default:
++			BUG();
++		}
 +
-+int omap_dss_get_num_overlays(void)
-+{
-+	return num_overlays;
-+}
-+EXPORT_SYMBOL(omap_dss_get_num_overlays);
++		r = kobject_init_and_add(&display->kobj, &display_ktype,
++				&pdev->dev.kobj, "display%d", num_displays);
 +
-+struct omap_overlay *omap_dss_get_overlay(int num)
-+{
-+	BUG_ON(num >= num_overlays);
-+	return omap_dss_overlays[num];
-+}
-+EXPORT_SYMBOL(omap_dss_get_overlay);
++		if (r) {
++			DSSERR("failed to create sysfs file\n");
++			continue;
++		}
 +
-+int omap_dss_get_num_overlay_managers(void)
-+{
-+	return num_overlay_managers;
-+}
-+EXPORT_SYMBOL(omap_dss_get_num_overlay_managers);
++		num_displays++;
 +
-+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num)
-+{
-+	BUG_ON(num >= num_overlay_managers);
-+	return omap_dss_overlay_managers[num];
++		list_add_tail(&display->list, &display_list);
++	}
 +}
-+EXPORT_SYMBOL(omap_dss_get_overlay_manager);
 +
-+static int ovl_mgr_apply_l4(struct omap_overlay_manager *mgr)
++void dss_uninit_displays(struct platform_device *pdev)
 +{
-+	DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name);
++	struct omap_display *display;
 +
-+	return 0;
++	while (!list_empty(&display_list)) {
++		display = list_first_entry(&display_list,
++				struct omap_display, list);
++		list_del(&display->list);
++		kobject_del(&display->kobj);
++		kobject_put(&display->kobj);
++		kfree(display);
++	}
++
++	num_displays = 0;
 +}
 +
-+void initialize_overlays(const char *def_disp_name)
++int dss_suspend_all_displays(void)
 +{
-+	int i;
-+	struct omap_overlay_manager *lcd_mgr;
-+	struct omap_overlay_manager *tv_mgr;
-+	struct omap_overlay_manager *def_mgr = NULL;
-+
-+	lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD);
-+	tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV);
-+
-+	if (def_disp_name) {
-+		for (i = 0; i < num_displays; i++) {
-+			struct omap_display *display = &displays[i];
-+
-+			if (strcmp(display->name, def_disp_name) == 0) {
-+				if (display->type != OMAP_DISPLAY_TYPE_VENC) {
-+					omap_dss_set_display(lcd_mgr, display);
-+					def_mgr = lcd_mgr;
-+				} else {
-+					omap_dss_set_display(tv_mgr, display);
-+					def_mgr = tv_mgr;
-+				}
++	int r;
++	struct omap_display *display;
 +
-+				break;
-+			}
++	list_for_each_entry(display, &display_list, list) {
++		if (display->state != OMAP_DSS_DISPLAY_ACTIVE) {
++			display->activate_after_resume = 0;
++			continue;
 +		}
 +
-+		if (!def_mgr)
-+			DSSWARN("default display %s not found\n",
-+					def_disp_name);
-+	}
-+
-+	if (def_mgr != lcd_mgr) {
-+		/* connect lcd manager to first non-VENC display found */
-+		for (i = 0; i < num_displays; i++) {
-+			struct omap_display *display = &displays[i];
-+			if (display->type != OMAP_DISPLAY_TYPE_VENC) {
-+				omap_dss_set_display(lcd_mgr, display);
-+
-+				if (!def_mgr)
-+					def_mgr = lcd_mgr;
-+
-+				break;
-+			}
++		if (!display->suspend) {
++			DSSERR("display '%s' doesn't implement suspend\n",
++					display->name);
++			r = -ENOSYS;
++			goto err;
 +		}
-+	}
 +
-+	if (def_mgr != tv_mgr) {
-+		/* connect tv manager to first VENC display found */
-+		for (i = 0; i < num_displays; i++) {
-+			struct omap_display *display = &displays[i];
-+			if (display->type == OMAP_DISPLAY_TYPE_VENC) {
-+				omap_dss_set_display(tv_mgr, display);
++		r = display->suspend(display);
 +
-+				if (!def_mgr)
-+					def_mgr = tv_mgr;
++		if (r)
++			goto err;
 +
-+				break;
-+			}
-+		}
++		display->activate_after_resume = 1;
 +	}
 +
-+	/* connect all dispc overlays to def_mgr */
-+	if (def_mgr) {
-+		for (i = 0; i < 3; i++) {
-+			struct omap_overlay *ovl;
-+			ovl = omap_dss_get_overlay(i);
-+			omap_dss_set_manager(ovl, def_mgr);
-+		}
-+	}
++	return 0;
++err:
++	/* resume all displays that were suspended */
++	dss_resume_all_displays();
++	return r;
++}
 +
-+	/* setup L4 overlay as an example */
-+	{
-+		static struct omap_overlay ovl = {
-+			.name = "l4-ovl",
-+			.supported_modes = OMAP_DSS_COLOR_RGB24U,
-+			.set_manager = &omap_dss_set_manager,
-+			.unset_manager = &omap_dss_unset_manager,
-+			.setup_input = &omap_dss_setup_overlay_input,
-+			.setup_output = &omap_dss_setup_overlay_output,
-+			.enable = &omap_dss_enable_overlay,
-+		};
++int dss_resume_all_displays(void)
++{
++	int r;
++	struct omap_display *display;
 +
-+		static struct omap_overlay_manager mgr = {
-+			.name = "l4",
-+			.num_overlays = 1,
-+			.overlays = &ovl,
-+			.set_display = &omap_dss_set_display,
-+			.unset_display = &omap_dss_unset_display,
-+			.apply = &ovl_mgr_apply_l4,
-+			.supported_displays =
-+				OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI,
-+		};
++	list_for_each_entry(display, &display_list, list) {
++		if (display->activate_after_resume && display->resume) {
++			r = display->resume(display);
++			if (r)
++				return r;
++		}
 +
-+		omap_dss_add_overlay(&ovl);
-+		omap_dss_add_overlay_manager(&mgr);
-+		omap_dss_set_manager(&ovl, &mgr);
++		display->activate_after_resume = 0;
 +	}
 +
++	return 0;
 +}
 +
-+
 +int omap_dss_get_num_displays(void)
 +{
 +	return num_displays;
 +}
 +EXPORT_SYMBOL(omap_dss_get_num_displays);
 +
++struct omap_display *dss_get_display(int no)
++{
++	int i = 0;
++	struct omap_display *display;
++
++	list_for_each_entry(display, &display_list, list) {
++		if (i++ == no)
++			return display;
++	}
++
++	return NULL;
++}
++
 +struct omap_display *omap_dss_get_display(int no)
 +{
 +	struct omap_display *display;
 +
-+	if (no >= num_displays)
-+		return NULL;
++	display = dss_get_display(no);
 +
-+	display = &displays[no];
++	if (!display)
++		return NULL;
 +
 +	switch (display->type) {
 +	case OMAP_DISPLAY_TYPE_VENC:
@@ -3203,21 +6146,21 @@ index 0000000..e3ff778
 +		return NULL;
 +	}
 +
-+	if (display->panel) {
-+		if (!try_module_get(display->panel->owner))
++	if (display->ctrl) {
++		if (!try_module_get(display->ctrl->owner))
 +			goto err0;
 +
-+		if (display->panel->init)
-+			if (display->panel->init(display) != 0)
++		if (display->ctrl->init)
++			if (display->ctrl->init(display) != 0)
 +				goto err1;
 +	}
 +
-+	if (display->ctrl) {
-+		if (!try_module_get(display->ctrl->owner))
++	if (display->panel) {
++		if (!try_module_get(display->panel->owner))
 +			goto err2;
 +
-+		if (display->ctrl->init)
-+			if (display->ctrl->init(display) != 0)
++		if (display->panel->init)
++			if (display->panel->init(display) != 0)
 +				goto err3;
 +	}
 +
@@ -3229,14 +6172,14 @@ index 0000000..e3ff778
 +
 +	return display;
 +err3:
-+	if (display->ctrl)
-+		module_put(display->ctrl->owner);
-+err2:
-+	if (display->panel && display->panel->init)
-+		display->panel->cleanup(display);
-+err1:
 +	if (display->panel)
 +		module_put(display->panel->owner);
++err2:
++	if (display->ctrl && display->ctrl->cleanup)
++		display->ctrl->cleanup(display);
++err1:
++	if (display->ctrl)
++		module_put(display->ctrl->owner);
 +err0:
 +	return NULL;
 +}
@@ -3266,10 +6209,9 @@ index 0000000..e3ff778
 +
 +void omap_dss_register_ctrl(struct omap_ctrl *ctrl)
 +{
-+	int i;
++	struct omap_display *display;
 +
-+	for (i = 0; i < num_displays; i++) {
-+		struct omap_display *display = &displays[i];
++	list_for_each_entry(display, &display_list, list) {
 +		if (display->hw_config.ctrl_name &&
 +		    strcmp(display->hw_config.ctrl_name, ctrl->name) == 0) {
 +			display->ctrl = ctrl;
@@ -3281,10 +6223,9 @@ index 0000000..e3ff778
 +
 +void omap_dss_register_panel(struct omap_panel *panel)
 +{
-+	int i;
++	struct omap_display *display;
 +
-+	for (i = 0; i < num_displays; i++) {
-+		struct omap_display *display = &displays[i];
++	list_for_each_entry(display, &display_list, list) {
 +		if (display->hw_config.panel_name &&
 +		    strcmp(display->hw_config.panel_name, panel->name) == 0) {
 +			display->panel = panel;
@@ -3296,10 +6237,9 @@ index 0000000..e3ff778
 +
 +void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl)
 +{
-+	int i;
++	struct omap_display *display;
 +
-+	for (i = 0; i < num_displays; i++) {
-+		struct omap_display *display = &displays[i];
++	list_for_each_entry(display, &display_list, list) {
 +		if (display->hw_config.ctrl_name &&
 +		    strcmp(display->hw_config.ctrl_name, ctrl->name) == 0)
 +			display->ctrl = NULL;
@@ -3309,26 +6249,25 @@ index 0000000..e3ff778
 +
 +void omap_dss_unregister_panel(struct omap_panel *panel)
 +{
-+	int i;
++	struct omap_display *display;
 +
-+	for (i = 0; i < num_displays; i++) {
-+		struct omap_display *display = &displays[i];
++	list_for_each_entry(display, &display_list, list) {
 +		if (display->hw_config.panel_name &&
 +		    strcmp(display->hw_config.panel_name, panel->name) == 0)
 +			display->panel = NULL;
 +	}
 +}
 +EXPORT_SYMBOL(omap_dss_unregister_panel);
-diff --git a/arch/arm/plat-omap/dss/dpi.c b/arch/arm/plat-omap/dss/dpi.c
+diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
 new file mode 100644
-index 0000000..2dd8a3b
+index 0000000..71fffca
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/dpi.c
-@@ -0,0 +1,344 @@
++++ b/drivers/video/omap2/dss/dpi.c
+@@ -0,0 +1,393 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/dpi.c
++ * linux/drivers/video/omap2/dss/dpi.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * Some code and ideas taken from drivers/video/omap/ driver
@@ -3354,20 +6293,70 @@ index 0000000..2dd8a3b
 +
 +#include <mach/board.h>
 +#include <mach/display.h>
-+#include "dss.h"
++#include <mach/cpu.h>
 +
++#include "dss.h"
 +
 +static struct {
 +	int update_enabled;
 +} dpi;
 +
-+static void dpi_set_mode(struct omap_display *display)
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,
++		unsigned long *fck, int *lck_div, int *pck_div)
++{
++	struct dsi_clock_info cinfo;
++	int r;
++
++	r = dsi_pll_calc_pck(is_tft, pck_req, &cinfo);
++	if (r)
++		return r;
++
++	r = dsi_pll_program(&cinfo);
++	if (r)
++		return r;
++
++	dss_select_clk_source(0, 1);
++
++	dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div);
++
++	*fck = cinfo.dsi1_pll_fclk;
++	*lck_div = cinfo.lck_div;
++	*pck_div = cinfo.pck_div;
++
++	return 0;
++}
++#else
++static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req,
++		unsigned long *fck, int *lck_div, int *pck_div)
++{
++	struct dispc_clock_info cinfo;
++	int r;
++
++	r = dispc_calc_clock_div(is_tft, pck_req, &cinfo);
++	if (r)
++		return r;
++
++	r = dispc_set_clock_div(&cinfo);
++	if (r)
++		return r;
++
++	*fck = cinfo.fck;
++	*lck_div = cinfo.lck_div;
++	*pck_div = cinfo.pck_div;
++
++	return 0;
++}
++#endif
++
++static int dpi_set_mode(struct omap_display *display)
 +{
 +	struct omap_panel *panel = display->panel;
 +	int lck_div, pck_div;
 +	unsigned long fck;
 +	unsigned long pck;
-+	int is_tft;
++	bool is_tft;
++	int r = 0;
 +
 +	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +
@@ -3376,39 +6365,14 @@ index 0000000..2dd8a3b
 +	is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0;
 +
 +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
-+	{
-+		struct dsi_clock_info cinfo;
-+		dsi_pll_calc_pck(is_tft,
-+				display->panel->timings.pixel_clock * 1000,
-+				&cinfo);
-+
-+		dsi_pll_program(&cinfo);
-+
-+		dss_select_clk_source(0, 1);
-+
-+		dispc_set_lcd_divisor(cinfo.lck_div, cinfo.pck_div);
-+
-+		fck = cinfo.dispc_fck;
-+		lck_div = cinfo.lck_div;
-+		pck_div = cinfo.pck_div;
-+	}
++	r = dpi_set_dsi_clk(is_tft, panel->timings.pixel_clock * 1000,
++			&fck, &lck_div, &pck_div);
 +#else
-+	{
-+		struct dispc_clock_info cinfo;
-+		dispc_calc_clock_div(is_tft, panel->timings.pixel_clock * 1000,
-+				&cinfo);
-+
-+		if (dispc_set_clock_div(&cinfo)) {
-+			DSSERR("Failed to set DSS clocks\n");
-+			dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
-+			return;
-+		}
-+
-+		fck = cinfo.fck;
-+		lck_div = cinfo.lck_div;
-+		pck_div = cinfo.pck_div;
-+	}
++	r = dpi_set_dispc_clk(is_tft, panel->timings.pixel_clock * 1000,
++			&fck, &lck_div, &pck_div);
 +#endif
++	if (r)
++		goto err0;
 +
 +	pck = fck / lck_div / pck_div / 1000;
 +
@@ -3422,68 +6386,74 @@ index 0000000..2dd8a3b
 +
 +	dispc_set_lcd_timings(&panel->timings);
 +
++err0:
 +	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++	return r;
 +}
 +
++static int dpi_basic_init(struct omap_display *display)
++{
++	bool is_tft;
++
++	is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0;
++
++	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
++	dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT :
++			OMAP_DSS_LCD_DISPLAY_STN);
++	dispc_set_tft_data_lines(display->hw_config.u.dpi.data_lines);
++
++	return 0;
++}
 +
 +static int dpi_display_enable(struct omap_display *display)
 +{
 +	struct omap_panel *panel = display->panel;
 +	int r;
-+	int is_tft;
-+	unsigned high, low, burst;
 +
 +	if (display->state != OMAP_DSS_DISPLAY_DISABLED) {
 +		DSSERR("display already enabled\n");
 +		return -EINVAL;
 +	}
 +
-+	r = panel->enable(display);
-+	if (r)
-+		return r;
-+
 +	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +
++	r = dpi_basic_init(display);
++	if (r)
++		goto err0;
++
 +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
 +	dss_clk_enable(DSS_CLK_FCK2);
 +	r = dsi_pll_init(0, 1);
 +	if (r)
-+		return r;
++		goto err1;
 +#endif
-+	is_tft = (display->panel->config & OMAP_DSS_LCD_TFT) != 0;
-+
-+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
-+	dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT :
-+			OMAP_DSS_LCD_DISPLAY_STN);
-+	dispc_set_tft_data_lines(display->hw_config.u.dpi.data_lines);
-+
-+	dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32);
-+	dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32);
-+	dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32);
-+
-+	burst = 16 * 32 / 8;
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_GFX) - burst;
-+	low = dispc_get_plane_fifo_size(OMAP_DSS_GFX) / 4;
-+	dispc_setup_plane_fifo(OMAP_DSS_GFX, low, high);
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) - burst;
-+	low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) / 4;
-+	dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, low, high);
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) - burst;
-+	low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) / 4;
-+	dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, low, high);
-+
-+	dpi_set_mode(display);
++	r = dpi_set_mode(display);
++	if (r)
++		goto err2;
 +
 +	mdelay(2);
 +
 +	dispc_enable_lcd_out(1);
 +
++	r = panel->enable(display);
++	if (r)
++		goto err3;
++
 +	display->state = OMAP_DSS_DISPLAY_ACTIVE;
 +
 +	return 0;
++
++err3:
++	dispc_enable_lcd_out(0);
++err2:
++#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
++	dsi_pll_uninit();
++err1:
++	dss_clk_disable(DSS_CLK_FCK2);
++#endif
++err0:
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++	return r;
 +}
 +
 +static int dpi_display_resume(struct omap_display *display);
@@ -3497,6 +6467,7 @@ index 0000000..2dd8a3b
 +		dpi_display_resume(display);
 +
 +	display->panel->disable(display);
++
 +	dispc_enable_lcd_out(0);
 +
 +#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
@@ -3515,6 +6486,8 @@ index 0000000..2dd8a3b
 +	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
 +		return -EINVAL;
 +
++	DSSDBG("dpi_display_suspend\n");
++
 +	if (display->panel->suspend)
 +		display->panel->suspend(display);
 +
@@ -3532,10 +6505,12 @@ index 0000000..2dd8a3b
 +	if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
 +		return -EINVAL;
 +
-+	dispc_enable_lcd_out(1);
++	DSSDBG("dpi_display_resume\n");
 +
 +	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +
++	dispc_enable_lcd_out(1);
++
 +	if (display->panel->resume)
 +		display->panel->resume(display);
 +
@@ -3558,21 +6533,34 @@ index 0000000..2dd8a3b
 +static int dpi_check_timings(struct omap_display *display,
 +			struct omap_video_timings *timings)
 +{
-+	int is_tft;
++	bool is_tft;
 +	int r;
 +	int lck_div, pck_div;
 +	unsigned long fck;
 +	unsigned long pck;
 +
-+	if (timings->hsw < 1 || timings->hsw > 64 ||
-+		timings->hfp < 1 || timings->hfp > 256 ||
-+		timings->hbp < 1 || timings->hbp > 256) {
-+		return -EINVAL;
-+	}
++	if (cpu_is_omap24xx() || omap_rev() < OMAP3430_REV_ES3_0) {
++		if (timings->hsw < 1 || timings->hsw > 64 ||
++				timings->hfp < 1 || timings->hfp > 256 ||
++				timings->hbp < 1 || timings->hbp > 256) {
++			return -EINVAL;
++		}
 +
-+	if (timings->vsw < 1 || timings->vsw > 64 ||
-+		timings->vfp > 256 || timings->vbp > 256) {
-+		return -EINVAL;
++		if (timings->vsw < 1 || timings->vsw > 64 ||
++				timings->vfp > 255 || timings->vbp > 255) {
++			return -EINVAL;
++		}
++	} else {
++		if (timings->hsw < 1 || timings->hsw > 256 ||
++				timings->hfp < 1 || timings->hfp > 4096 ||
++				timings->hbp < 1 || timings->hbp > 4096) {
++			return -EINVAL;
++		}
++
++		if (timings->vsw < 1 || timings->vsw > 64 ||
++				timings->vfp > 4095 || timings->vbp > 4095) {
++			return -EINVAL;
++		}
 +	}
 +
 +	if (timings->pixel_clock == 0)
@@ -3589,7 +6577,7 @@ index 0000000..2dd8a3b
 +		if (r)
 +			return r;
 +
-+		fck = cinfo.dispc_fck;
++		fck = cinfo.dsi1_pll_fclk;
 +		lck_div = cinfo.lck_div;
 +		pck_div = cinfo.pck_div;
 +	}
@@ -3669,16 +6657,16 @@ index 0000000..2dd8a3b
 +{
 +}
 +
-diff --git a/arch/arm/plat-omap/dss/dsi.c b/arch/arm/plat-omap/dss/dsi.c
+diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
 new file mode 100644
-index 0000000..e279571
+index 0000000..4442931
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/dsi.c
-@@ -0,0 +1,3187 @@
++++ b/drivers/video/omap2/dss/dsi.c
+@@ -0,0 +1,3752 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/dsi.c
++ * linux/drivers/video/omap2/dss/dsi.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * This program is free software; you can redistribute it and/or modify it
@@ -3705,6 +6693,8 @@ index 0000000..e279571
 +#include <linux/delay.h>
 +#include <linux/workqueue.h>
 +#include <linux/mutex.h>
++#include <linux/seq_file.h>
++#include <linux/kfifo.h>
 +
 +#include <mach/board.h>
 +#include <mach/display.h>
@@ -3712,9 +6702,7 @@ index 0000000..e279571
 +
 +#include "dss.h"
 +
-+/*#define VERBOSE*/
 +/*#define VERBOSE_IRQ*/
-+/*#define MEASURE_PERF*/
 +
 +#define DSI_BASE		0x4804FC00
 +
@@ -3867,6 +6855,62 @@ index 0000000..e279571
 +	DSI_FIFO_SIZE_128	= 4,
 +};
 +
++#define DSI_CMD_FIFO_LEN 16
++
++struct dsi_cmd_update {
++	int bytespp;
++	u16 x;
++	u16 y;
++	u16 w;
++	u16 h;
++};
++
++struct dsi_cmd_mem_read {
++	void *buf;
++	size_t size;
++	u16 x;
++	u16 y;
++	u16 w;
++	u16 h;
++	size_t *ret_size;
++	struct completion *completion;
++};
++
++struct dsi_cmd_test {
++	int test_num;
++	int *result;
++	struct completion *completion;
++};
++
++enum dsi_cmd {
++	DSI_CMD_UPDATE,
++	DSI_CMD_AUTOUPDATE,
++	DSI_CMD_SYNC,
++	DSI_CMD_MEM_READ,
++	DSI_CMD_TEST,
++	DSI_CMD_SET_TE,
++	DSI_CMD_SET_UPDATE_MODE,
++	DSI_CMD_SET_ROTATE,
++	DSI_CMD_SET_MIRROR,
++};
++
++struct dsi_cmd_item {
++	struct omap_display *display;
++
++	enum dsi_cmd cmd;
++
++	union {
++		struct dsi_cmd_update r;
++		struct completion *sync;
++		struct dsi_cmd_mem_read mem_read;
++		struct dsi_cmd_test test;
++		int te;
++		enum omap_dss_update_mode update_mode;
++		int rotate;
++		int mirror;
++	} u;
++};
++
 +static struct
 +{
 +	void __iomem	*base;
@@ -3876,10 +6920,9 @@ index 0000000..e279571
 +	unsigned long	dsiphy;		/* Hz */
 +	unsigned long	ddr_clk;	/* Hz */
 +
-+	u32		ctx[DSI_SZ_REGS / sizeof(u32)];
-+
 +	struct {
-+		enum fifo_size	fifo_size;
++		struct omap_display *display;
++		enum fifo_size fifo_size;
 +		int dest_per;	/* destination peripheral 0-3 */
 +	} vc[4];
 +
@@ -3889,34 +6932,54 @@ index 0000000..e279571
 +
 +	struct completion bta_completion;
 +
-+	spinlock_t update_lock;
-+	int update_ongoing;
-+	int update_syncers;
-+	struct completion update_completion;
-+	struct delayed_work framedone_work;
++	struct work_struct framedone_work;
++	struct work_struct process_work;
++	struct workqueue_struct *workqueue;
 +
-+	enum omap_dss_update_mode user_update_mode; /* what the user wants */
-+	enum omap_dss_update_mode update_mode; /* current mode */
++	enum omap_dss_update_mode user_update_mode;
++	enum omap_dss_update_mode target_update_mode;
++	enum omap_dss_update_mode update_mode;
 +	int use_te;
 +	int framedone_scheduled; /* helps to catch strange framedone bugs */
 +
-+	struct {
-+		struct omap_display *display;
-+		int x, y, w, h;
-+		int bytespp;
-+	} update_region;
-+
 +	unsigned long cache_req_pck;
 +	unsigned long cache_clk_freq;
 +	struct dsi_clock_info cache_cinfo;
 +
-+#ifdef MEASURE_PERF
++	struct kfifo      *cmd_fifo;
++	spinlock_t        cmd_lock;
++	struct completion cmd_done;
++	atomic_t          cmd_fifo_full;
++	atomic_t          cmd_pending;
++
++	bool autoupdate_setup;
++
++#ifdef DEBUG
 +	ktime_t perf_setup_time;
 +	ktime_t perf_start_time;
 +	int perf_measure_frames;
++
++	struct {
++		int x, y, w, h;
++		int bytespp;
++	} update_region;
++
 +#endif
++	int debug_process;
++	int debug_read;
++	int debug_write;
 +} dsi;
 +
++#ifdef DEBUG
++static unsigned int dsi_perf;
++module_param_named(dsi_perf, dsi_perf, bool, 0644);
++#endif
++
++static void dsi_process_cmd_fifo(struct work_struct *work);
++static void dsi_push_update(struct omap_display *display,
++		int x, int y, int w, int h);
++static void dsi_push_autoupdate(struct omap_display *display);
++
 +static inline void dsi_write_reg(const struct dsi_reg idx, u32 val)
 +{
 +	__raw_writel(val, dsi.base + idx.idx);
@@ -3928,108 +6991,14 @@ index 0000000..e279571
 +}
 +
 +
-+#define SR(reg) \
-+	dsi.ctx[(DSI_##reg).idx / sizeof(u32)] = dsi_read_reg(DSI_##reg)
-+#define RR(reg) \
-+	dsi_write_reg(DSI_##reg, dsi.ctx[(DSI_##reg).idx / sizeof(u32)])
-+
 +void dsi_save_context(void)
 +{
-+	SR(SYSCONFIG);
-+	SR(IRQENABLE);
-+	SR(CTRL);
-+	SR(COMPLEXIO_CFG1);
-+	SR(COMPLEXIO_IRQ_ENABLE);
-+	SR(CLK_CTRL);
-+	SR(TIMING1);
-+	SR(TIMING2);
-+	SR(VM_TIMING1);
-+	SR(VM_TIMING2);
-+	SR(VM_TIMING3);
-+	SR(CLK_TIMING);
-+	SR(TX_FIFO_VC_SIZE);
-+	SR(RX_FIFO_VC_SIZE);
-+	SR(COMPLEXIO_CFG2);
-+	SR(VM_TIMING4);
-+	SR(VM_TIMING5);
-+	SR(VM_TIMING6);
-+	SR(VM_TIMING7);
-+	SR(STOPCLK_TIMING);
-+
-+	SR(VC_CTRL(0));
-+	SR(VC_TE(0));
-+	SR(VC_IRQENABLE(0));
-+
-+	SR(VC_CTRL(1));
-+	SR(VC_TE(1));
-+	SR(VC_IRQENABLE(1));
-+
-+	SR(VC_CTRL(2));
-+	SR(VC_TE(2));
-+	SR(VC_IRQENABLE(2));
-+
-+	SR(VC_CTRL(3));
-+	SR(VC_TE(3));
-+	SR(VC_IRQENABLE(3));
-+
-+	SR(DSIPHY_CFG0);
-+	SR(DSIPHY_CFG1);
-+	SR(DSIPHY_CFG2);
-+	SR(DSIPHY_CFG5);
-+
-+	SR(PLL_CONTROL);
-+	SR(PLL_CONFIGURATION1);
-+	SR(PLL_CONFIGURATION2);
 +}
 +
 +void dsi_restore_context(void)
 +{
-+	RR(SYSCONFIG);
-+	RR(IRQENABLE);
-+	RR(CTRL);
-+	RR(COMPLEXIO_CFG1);
-+	RR(COMPLEXIO_IRQ_ENABLE);
-+	RR(CLK_CTRL);
-+	RR(TIMING1);
-+	RR(TIMING2);
-+	RR(VM_TIMING1);
-+	RR(VM_TIMING2);
-+	RR(VM_TIMING3);
-+	RR(CLK_TIMING);
-+	RR(TX_FIFO_VC_SIZE);
-+	RR(RX_FIFO_VC_SIZE);
-+	RR(COMPLEXIO_CFG2);
-+	RR(VM_TIMING4);
-+	RR(VM_TIMING5);
-+	RR(VM_TIMING6);
-+	RR(VM_TIMING7);
-+	RR(STOPCLK_TIMING);
-+
-+	RR(VC_CTRL(0));
-+	RR(VC_IRQENABLE(0));
-+
-+	RR(VC_CTRL(1));
-+	RR(VC_IRQENABLE(1));
-+
-+	RR(VC_CTRL(2));
-+	RR(VC_IRQENABLE(2));
-+
-+	RR(VC_CTRL(3));
-+	RR(VC_IRQENABLE(3));
-+
-+	RR(DSIPHY_CFG0);
-+	RR(DSIPHY_CFG1);
-+	RR(DSIPHY_CFG2);
-+	RR(DSIPHY_CFG5);
-+
-+	RR(PLL_CONTROL);
-+	RR(PLL_CONFIGURATION1);
-+	RR(PLL_CONFIGURATION2);
 +}
 +
-+#undef SR
-+#undef RR
-+
 +static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum,
 +		int value)
 +{
@@ -4043,8 +7012,7 @@ index 0000000..e279571
 +	return value;
 +}
 +
-+
-+#ifdef MEASURE_PERF
++#ifdef DEBUG
 +static void perf_mark_setup(void)
 +{
 +	dsi.perf_setup_time = ktime_get();
@@ -4063,6 +7031,9 @@ index 0000000..e279571
 +	const int numframes = 100;
 +	static u32 s_trans_us, s_min_us = 0xffffffff, s_max_us;
 +
++	if (!dsi_perf)
++		return;
++
 +	if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
 +		return;
 +
@@ -4098,12 +7069,13 @@ index 0000000..e279571
 +		if (dsi.perf_measure_frames < numframes)
 +			return;
 +
-+		DSSINFO("%s update: %d frames in %u us (min/max %u/%u), "
-+				"%u fps\n",
++		DSSINFO("%s update: %d frames in %u us "
++				"(min/max/avg %u/%u/%u), %u fps\n",
 +				name, numframes,
 +				s_trans_us,
 +				s_min_us,
 +				s_max_us,
++				s_trans_us / numframes,
 +				1000*1000 / (s_trans_us / numframes));
 +
 +		dsi.perf_measure_frames = 0;
@@ -4128,9 +7100,6 @@ index 0000000..e279571
 +#define perf_show(x)
 +#endif
 +
-+
-+
-+
 +static void print_irq_status(u32 status)
 +{
 +#ifndef VERBOSE_IRQ
@@ -4331,7 +7300,7 @@ index 0000000..e279571
 +}
 +
 +/* DSI func clock. this could also be DSI2_PLL_FCLK */
-+static inline void enable_clocks(int enable)
++static inline void enable_clocks(bool enable)
 +{
 +	if (enable)
 +		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -4340,7 +7309,7 @@ index 0000000..e279571
 +}
 +
 +/* source clock for DSI PLL. this could also be PCLKFREE */
-+static inline void dsi_enable_pll_clock(int enable)
++static inline void dsi_enable_pll_clock(bool enable)
 +{
 +	if (enable)
 +		dss_clk_enable(DSS_CLK_FCK2);
@@ -4385,7 +7354,7 @@ index 0000000..e279571
 +#define _dsi_print_reset_status()
 +#endif
 +
-+static inline int dsi_if_enable(int enable)
++static inline int dsi_if_enable(bool enable)
 +{
 +	DSSDBG("dsi_if_enable(%d)\n", enable);
 +
@@ -4472,7 +7441,7 @@ index 0000000..e279571
 +	return 0;
 +}
 +
-+int dsi_pll_calc_pck(int is_tft, unsigned long req_pck,
++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck,
 +		struct dsi_clock_info *cinfo)
 +{
 +	struct dsi_clock_info cur, best;
@@ -4532,30 +7501,30 @@ index 0000000..e279571
 +			/* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3  < 173MHz */
 +			for (cur.regm3 = 1; cur.regm3 < REGM3_MAX;
 +					++cur.regm3) {
-+				cur.dispc_fck = cur.dsiphy / cur.regm3;
++				cur.dsi1_pll_fclk = cur.dsiphy / cur.regm3;
 +
 +				/* this will narrow down the search a bit,
 +				 * but still give pixclocks below what was
 +				 * requested */
-+				if (cur.dispc_fck  < req_pck)
++				if (cur.dsi1_pll_fclk  < req_pck)
 +					break;
 +
-+				if (cur.dispc_fck > DISPC_MAX_FCK)
++				if (cur.dsi1_pll_fclk > DISPC_MAX_FCK)
 +					continue;
 +
 +				if (min_fck_per_pck &&
-+					cur.dispc_fck <
++					cur.dsi1_pll_fclk <
 +						req_pck * min_fck_per_pck)
 +					continue;
 +
 +				match = 1;
 +
 +				find_lck_pck_divs(is_tft, req_pck,
-+						cur.dispc_fck,
++						cur.dsi1_pll_fclk,
 +						&cur.lck_div,
 +						&cur.pck_div);
 +
-+				cur.lck = cur.dispc_fck / cur.lck_div;
++				cur.lck = cur.dsi1_pll_fclk / cur.lck_div;
 +				cur.pck = cur.lck / cur.pck_div;
 +
 +				if (abs(cur.pck - req_pck) <
@@ -4583,12 +7552,13 @@ index 0000000..e279571
 +		return -EINVAL;
 +	}
 +
-+	/* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4  < 173MHz */
-+	/* hardcoded 48MHz for now. what should it be? */
++	/* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */
 +	best.regm4 = best.dsiphy / 48000000;
 +	if (best.regm4 > REGM4_MAX)
 +		best.regm4 = REGM4_MAX;
-+	best.dsi_fck = best.dsiphy / best.regm4;
++	else if (best.regm4 == 0)
++		best.regm4 = 1;
++	best.dsi2_pll_fclk = best.dsiphy / best.regm4;
 +
 +	if (cinfo)
 +		*cinfo = best;
@@ -4604,7 +7574,7 @@ index 0000000..e279571
 +		struct dsi_clock_info *cinfo)
 +{
 +	struct dsi_clock_info cur, best;
-+	const int use_dss2_fck = 1;
++	const bool use_dss2_fck = 1;
 +	unsigned long datafreq;
 +
 +	DSSDBG("dsi_pll_calc_ddrfreq\n");
@@ -4667,19 +7637,21 @@ index 0000000..e279571
 +		}
 +	}
 +found:
-+	/* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3  < 173MHz */
-+	/* hardcoded 48MHz for now. what should it be? */
-+	best.regm3 = best.dsiphy / (48000000);
++	/* DSI1_PLL_FCLK (regm3) is not used. Set it to something sane. */
++	best.regm3 = best.dsiphy / 48000000;
 +	if (best.regm3 > REGM3_MAX)
 +		best.regm3 = REGM3_MAX;
-+	best.dispc_fck = best.dsiphy / best.regm3;
++	else if (best.regm3 == 0)
++		best.regm3 = 1;
++	best.dsi1_pll_fclk = best.dsiphy / best.regm3;
 +
-+	/* DSI2_PLL_FCLK(MHz) = DSIPHY(MHz) / regm4  < 173MHz */
-+	/* hardcoded 48MHz for now. what should it be? */
-+	best.regm4 = best.dsiphy / (48000000);
++	/* DSI2_PLL_FCLK (regm4) is not used. Set it to something sane. */
++	best.regm4 = best.dsiphy / 48000000;
 +	if (best.regm4 > REGM4_MAX)
 +		best.regm4 = REGM4_MAX;
-+	best.dsi_fck = best.dsiphy / best.regm4;
++	else if (best.regm4 == 0)
++		best.regm4 = 1;
++	best.dsi2_pll_fclk = best.dsiphy / best.regm4;
 +
 +	if (cinfo)
 +		*cinfo = best;
@@ -4698,13 +7670,10 @@ index 0000000..e279571
 +
 +	DSSDBG("dsi_pll_program\n");
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
-+
 +	dsi.dsiphy = cinfo->dsiphy;
 +	dsi.ddr_clk = dsi.dsiphy / 4;
-+	dsi.dsi1_pll_fclk = cinfo->dispc_fck;
-+	dsi.dsi2_pll_fclk = cinfo->dsi_fck;
++	dsi.dsi1_pll_fclk = cinfo->dsi1_pll_fclk;
++	dsi.dsi2_pll_fclk = cinfo->dsi2_pll_fclk;
 +
 +	DSSDBG("DSI Fint %ld\n", cinfo->fint);
 +
@@ -4727,9 +7696,9 @@ index 0000000..e279571
 +	DSSDBG("Clock lane freq %ld Hz\n", dsi.ddr_clk);
 +
 +	DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n",
-+			cinfo->regm3, cinfo->dispc_fck);
++			cinfo->regm3, cinfo->dsi1_pll_fclk);
 +	DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n",
-+			cinfo->regm4, cinfo->dsi_fck);
++			cinfo->regm4, cinfo->dsi2_pll_fclk);
 +
 +	REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */
 +
@@ -4786,13 +7755,10 @@ index 0000000..e279571
 +
 +	DSSDBG("PLL config done\n");
 +err:
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
-+
 +	return r;
 +}
 +
-+int dsi_pll_init(int enable_hsclk, int enable_hsdiv)
++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv)
 +{
 +	int r = 0;
 +	enum dsi_pll_power_state pwstate;
@@ -4806,21 +7772,25 @@ index 0000000..e279571
 +	/* configure dispc fck and pixel clock to something sane */
 +	r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo);
 +	if (r)
-+		return r;
++		goto err0;
 +
 +	r = dispc_set_clock_div(&cinfo);
 +	if (r) {
 +		DSSERR("Failed to set basic clocks\n");
-+		return r;
++		goto err0;
 +	}
 +
++	r = dss_dsi_power_up();
++	if (r)
++		goto err0;
++
 +	/* PLL does not come out of reset without this... */
 +	dispc_pck_free_enable(1);
 +
 +	if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
 +		DSSERR("PLL not coming out of reset.\n");
 +		r = -ENODEV;
-+		goto err;
++		goto err1;
 +	}
 +
 +	/* ... but if left on, we get problems when planes do not
@@ -4839,15 +7809,14 @@ index 0000000..e279571
 +	r = dsi_pll_power(pwstate);
 +
 +	if (r)
-+		goto err;
-+
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
++		goto err1;
 +
 +	DSSDBG("PLL init done\n");
 +
 +	return 0;
-+err:
++err1:
++	dss_dsi_power_down();
++err0:
 +	enable_clocks(0);
 +	dsi_enable_pll_clock(0);
 +	return r;
@@ -4855,8 +7824,12 @@ index 0000000..e279571
 +
 +void dsi_pll_uninit(void)
 +{
++	enable_clocks(0);
++	dsi_enable_pll_clock(0);
++
 +	dsi.pll_locked = 0;
 +	dsi_pll_power(DSI_PLL_POWER_OFF);
++	dss_dsi_power_down();
 +	DSSDBG("PLL uninit done\n");
 +}
 +
@@ -4870,31 +7843,28 @@ index 0000000..e279571
 +	return dsi.dsi2_pll_fclk;
 +}
 +
-+ssize_t dsi_print_clocks(char *buf, ssize_t size)
++void dsi_dump_clocks(struct seq_file *s)
 +{
-+	ssize_t l = 0;
 +	int clksel;
 +
 +	enable_clocks(1);
 +
 +	clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11);
 +
-+	l += snprintf(buf + l, size - l, "- dsi -\n");
++	seq_printf(s, "- dsi -\n");
 +
-+	l += snprintf(buf + l, size - l, "dsi fclk source = %s\n",
++	seq_printf(s, "dsi fclk source = %s\n",
 +			dss_get_dsi_clk_source() == 0 ?
 +			"dss1_alwon_fclk" : "dsi2_pll_fclk");
 +
-+	l += snprintf(buf + l, size - l, "dsi pll source = %s\n",
++	seq_printf(s, "dsi pll source = %s\n",
 +			clksel == 0 ?
 +			"dss2_alwon_fclk" : "pclkfree");
 +
-+	l += snprintf(buf + l, size - l,
-+			"DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n",
++	seq_printf(s,	"DSIPHY\t\t%lu\nDDR_CLK\t\t%lu\n",
 +			dsi.dsiphy, dsi.ddr_clk);
 +
-+	l += snprintf(buf + l, size - l,
-+			"dsi1_pll_fck\t%lu (%s)\n"
++	seq_printf(s,	"dsi1_pll_fck\t%lu (%s)\n"
 +			"dsi2_pll_fck\t%lu (%s)\n",
 +			dsi.dsi1_pll_fclk,
 +			dss_get_dispc_clk_source() == 0 ? "off" : "on",
@@ -4902,10 +7872,87 @@ index 0000000..e279571
 +			dss_get_dsi_clk_source() == 0 ? "off" : "on");
 +
 +	enable_clocks(0);
-+
-+	return l;
 +}
 +
++void dsi_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r))
++
++	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	DUMPREG(DSI_REVISION);
++	DUMPREG(DSI_SYSCONFIG);
++	DUMPREG(DSI_SYSSTATUS);
++	DUMPREG(DSI_IRQSTATUS);
++	DUMPREG(DSI_IRQENABLE);
++	DUMPREG(DSI_CTRL);
++	DUMPREG(DSI_COMPLEXIO_CFG1);
++	DUMPREG(DSI_COMPLEXIO_IRQ_STATUS);
++	DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE);
++	DUMPREG(DSI_CLK_CTRL);
++	DUMPREG(DSI_TIMING1);
++	DUMPREG(DSI_TIMING2);
++	DUMPREG(DSI_VM_TIMING1);
++	DUMPREG(DSI_VM_TIMING2);
++	DUMPREG(DSI_VM_TIMING3);
++	DUMPREG(DSI_CLK_TIMING);
++	DUMPREG(DSI_TX_FIFO_VC_SIZE);
++	DUMPREG(DSI_RX_FIFO_VC_SIZE);
++	DUMPREG(DSI_COMPLEXIO_CFG2);
++	DUMPREG(DSI_RX_FIFO_VC_FULLNESS);
++	DUMPREG(DSI_VM_TIMING4);
++	DUMPREG(DSI_TX_FIFO_VC_EMPTINESS);
++	DUMPREG(DSI_VM_TIMING5);
++	DUMPREG(DSI_VM_TIMING6);
++	DUMPREG(DSI_VM_TIMING7);
++	DUMPREG(DSI_STOPCLK_TIMING);
++
++	DUMPREG(DSI_VC_CTRL(0));
++	DUMPREG(DSI_VC_TE(0));
++	DUMPREG(DSI_VC_LONG_PACKET_HEADER(0));
++	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0));
++	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0));
++	DUMPREG(DSI_VC_IRQSTATUS(0));
++	DUMPREG(DSI_VC_IRQENABLE(0));
++
++	DUMPREG(DSI_VC_CTRL(1));
++	DUMPREG(DSI_VC_TE(1));
++	DUMPREG(DSI_VC_LONG_PACKET_HEADER(1));
++	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1));
++	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1));
++	DUMPREG(DSI_VC_IRQSTATUS(1));
++	DUMPREG(DSI_VC_IRQENABLE(1));
++
++	DUMPREG(DSI_VC_CTRL(2));
++	DUMPREG(DSI_VC_TE(2));
++	DUMPREG(DSI_VC_LONG_PACKET_HEADER(2));
++	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2));
++	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2));
++	DUMPREG(DSI_VC_IRQSTATUS(2));
++	DUMPREG(DSI_VC_IRQENABLE(2));
++
++	DUMPREG(DSI_VC_CTRL(3));
++	DUMPREG(DSI_VC_TE(3));
++	DUMPREG(DSI_VC_LONG_PACKET_HEADER(3));
++	DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3));
++	DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3));
++	DUMPREG(DSI_VC_IRQSTATUS(3));
++	DUMPREG(DSI_VC_IRQENABLE(3));
++
++	DUMPREG(DSI_DSIPHY_CFG0);
++	DUMPREG(DSI_DSIPHY_CFG1);
++	DUMPREG(DSI_DSIPHY_CFG2);
++	DUMPREG(DSI_DSIPHY_CFG5);
++
++	DUMPREG(DSI_PLL_CONTROL);
++	DUMPREG(DSI_PLL_STATUS);
++	DUMPREG(DSI_PLL_GO);
++	DUMPREG(DSI_PLL_CONFIGURATION1);
++	DUMPREG(DSI_PLL_CONFIGURATION2);
++
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
++}
 +
 +enum dsi_complexio_power_state {
 +	DSI_COMPLEXIO_POWER_OFF		= 0x0,
@@ -4972,12 +8019,17 @@ index 0000000..e279571
 +	*/
 +}
 +
-+static inline int ns2ddr(int ns)
++static inline unsigned ns2ddr(unsigned ns)
 +{
 +	/* convert time in ns to ddr ticks, rounding up */
 +	return (ns * (dsi.ddr_clk/1000/1000) + 999) / 1000;
 +}
 +
++static inline unsigned ddr2ns(unsigned ddr)
++{
++	return ddr * 1000 * 1000 / (dsi.ddr_clk / 1000);
++}
++
 +static void dsi_complexio_timings(void)
 +{
 +	u32 r;
@@ -4996,7 +8048,7 @@ index 0000000..e279571
 +	ths_prepare_ths_zero = ns2ddr(145) + 5;
 +
 +	/* min max(8*UI, 60ns+4*UI) */
-+	ths_trail = max(4, ns2ddr(60) + 2);
++	ths_trail = max((unsigned)4, ns2ddr(60) + 2);
 +
 +	/* min 100ns */
 +	ths_exit = ns2ddr(100);
@@ -5013,16 +8065,20 @@ index 0000000..e279571
 +	/* min tclk-prepare + tclk-zero = 300ns */
 +	tclk_zero = ns2ddr(300 - 38);
 +
-+#ifdef VERBOSE
-+	DSSDBG("ths_prepare %d, ths_prepare_ths_zero %d\n",
-+		ths_prepare, ths_prepare_ths_zero);
-+	DSSDBG("ths_trail %d, ths_exit %d\n", ths_trail, ths_exit);
-+
-+
-+	DSSDBG("tlpx_half %d, tclk_trail %d, tclk_zero %d\n", tlpx_half,
-+			tclk_trail, tclk_zero);
-+	DSSDBG("tclk_prepare %d\n", tclk_prepare);
-+#endif
++	DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n",
++		ths_prepare, ddr2ns(ths_prepare),
++		ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero));
++	DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n",
++			ths_trail, ddr2ns(ths_trail),
++			ths_exit, ddr2ns(ths_exit));
++
++	DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), "
++			"tclk_zero %u (%uns)\n",
++			tlpx_half, ddr2ns(tlpx_half),
++			tclk_trail, ddr2ns(tclk_trail),
++			tclk_zero, ddr2ns(tclk_zero));
++	DSSDBG("tclk_prepare %u (%uns)\n",
++			tclk_prepare, ddr2ns(tclk_prepare));
 +
 +	/* program timings */
 +
@@ -5114,6 +8170,27 @@ index 0000000..e279571
 +	dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF);
 +}
 +
++static int _dsi_wait_reset(void)
++{
++	int i = 0;
++
++	while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) {
++		if (i++ > 5) {
++			DSSERR("soft reset failed\n");
++			return -ENODEV;
++		}
++		udelay(1);
++	}
++
++	return 0;
++}
++
++static int _dsi_reset(void)
++{
++	/* Soft reset */
++	REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1);
++	return _dsi_wait_reset();
++}
 +
 +
 +static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2,
@@ -5255,7 +8332,7 @@ index 0000000..e279571
 +}
 +
 +
-+static int dsi_vc_enable(int channel, int enable)
++static int dsi_vc_enable(int channel, bool enable)
 +{
 +	DSSDBG("dsi_vc_enable channel %d, enable %d\n", channel, enable);
 +
@@ -5271,7 +8348,7 @@ index 0000000..e279571
 +	return 0;
 +}
 +
-+static void dsi_vc_enable_hs(int channel, int enable)
++static void dsi_vc_enable_hs(int channel, bool enable)
 +{
 +	DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable);
 +
@@ -5299,6 +8376,43 @@ index 0000000..e279571
 +	}
 +}
 +
++static void dsi_show_rx_ack_with_err(u16 err)
++{
++	DSSERR("\tACK with ERROR (%#x):\n", err);
++	if (err & (1 << 0))
++		DSSERR("\t\tSoT Error\n");
++	if (err & (1 << 1))
++		DSSERR("\t\tSoT Sync Error\n");
++	if (err & (1 << 2))
++		DSSERR("\t\tEoT Sync Error\n");
++	if (err & (1 << 3))
++		DSSERR("\t\tEscape Mode Entry Command Error\n");
++	if (err & (1 << 4))
++		DSSERR("\t\tLP Transmit Sync Error\n");
++	if (err & (1 << 5))
++		DSSERR("\t\tHS Receive Timeout Error\n");
++	if (err & (1 << 6))
++		DSSERR("\t\tFalse Control Error\n");
++	if (err & (1 << 7))
++		DSSERR("\t\t(reserved7)\n");
++	if (err & (1 << 8))
++		DSSERR("\t\tECC Error, single-bit (corrected)\n");
++	if (err & (1 << 9))
++		DSSERR("\t\tECC Error, multi-bit (not corrected)\n");
++	if (err & (1 << 10))
++		DSSERR("\t\tChecksum Error\n");
++	if (err & (1 << 11))
++		DSSERR("\t\tData type not recognized\n");
++	if (err & (1 << 12))
++		DSSERR("\t\tInvalid VC ID\n");
++	if (err & (1 << 13))
++		DSSERR("\t\tInvalid Transmission Length\n");
++	if (err & (1 << 14))
++		DSSERR("\t\t(reserved14)\n");
++	if (err & (1 << 15))
++		DSSERR("\t\tDSI Protocol Violation\n");
++}
++
 +static u16 dsi_vc_flush_receive_data(int channel)
 +{
 +	/* RX_FIFO_NOT_EMPTY */
@@ -5307,31 +8421,22 @@ index 0000000..e279571
 +		u8 dt;
 +		val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
 +		DSSDBG("\trawval %#08x\n", val);
-+		dt = FLD_GET(val, 7, 0);
++		dt = FLD_GET(val, 5, 0);
 +		if (dt == DSI_DT_RX_ACK_WITH_ERR) {
 +			u16 err = FLD_GET(val, 23, 8);
-+			DSSERR("\tACK with ERROR: %#x\n", err);
-+			if (err & (1 << 9))
-+				DSSERR("\t\tECC multibit\n");
-+			if (err & (1 << 11))
-+				DSSERR("\t\tData type not recognized\n");
-+			if (err & (1 << 12))
-+				DSSERR("\t\tInvalid VC ID\n");
-+
++			dsi_show_rx_ack_with_err(err);
 +		} else if (dt == DSI_DT_RX_SHORT_READ_1) {
 +			DSSDBG("\tDCS short response, 1 byte: %#x\n",
 +					FLD_GET(val, 23, 8));
-+			return FLD_GET(val, 23, 8);
 +		} else if (dt == DSI_DT_RX_SHORT_READ_2) {
 +			DSSDBG("\tDCS short response, 2 byte: %#x\n",
 +					FLD_GET(val, 23, 8));
-+			return FLD_GET(val, 23, 8);
 +		} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
 +			DSSDBG("\tDCS long response, len %d\n",
 +					FLD_GET(val, 23, 8));
 +			dsi_vc_flush_long_data(channel);
 +		} else {
-+			DSSERR("\tunknown datatype\n");
++			DSSERR("\tunknown datatype 0x%02x\n", dt);
 +		}
 +	}
 +	return 0;
@@ -5422,7 +8527,8 @@ index 0000000..e279571
 +	int r = 0;
 +	u8 b1, b2, b3, b4;
 +
-+	/*DSSDBG("dsi_vc_send_long, %d bytes\n", len); */
++	if (dsi.debug_write)
++		DSSDBG("dsi_vc_send_long, %d bytes\n", len);
 +
 +	/* len + header */
 +	if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) {
@@ -5436,7 +8542,8 @@ index 0000000..e279571
 +
 +	p = data;
 +	for (i = 0; i < len >> 2; i++) {
-+		/*DSSDBG("\tsending full packet %d\n", i); */
++		if (dsi.debug_write)
++			DSSDBG("\tsending full packet %d\n", i);
 +		/*dsi_vc_print_status(0); */
 +
 +		b1 = *p++;
@@ -5451,7 +8558,8 @@ index 0000000..e279571
 +	if (i) {
 +		b1 = 0; b2 = 0; b3 = 0;
 +
-+		/*DSSDBG("\tsending remainder bytes %d\n", i); */
++		if (dsi.debug_write)
++			DSSDBG("\tsending remainder bytes %d\n", i);
 +
 +		switch (i) {
 +		case 3:
@@ -5478,11 +8586,12 @@ index 0000000..e279571
 +{
 +	u32 r;
 +	u8 data_id;
-+/*
-+	DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
-+			channel,
-+			data_type, data & 0xff, (data >> 8) & 0xff);
-+*/
++
++	if (dsi.debug_write)
++		DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n",
++				channel,
++				data_type, data & 0xff, (data >> 8) & 0xff);
++
 +	if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) {
 +		DSSERR("ERROR FIFO FULL, aborting transfer\n");
 +		return -EINVAL;
@@ -5547,34 +8656,37 @@ index 0000000..e279571
 +{
 +	u32 val;
 +	u8 dt;
-+	int debug = 0;
++	int r;
 +
-+	if (debug)
++	if (dsi.debug_read)
 +		DSSDBG("dsi_vc_dcs_read\n");
 +
-+	dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
++	r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0);
++	if (r)
++		return r;
 +
-+	dsi_vc_send_bta_sync(channel);
++	r = dsi_vc_send_bta_sync(channel);
++	if (r)
++		return r;
++
++	if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) {	/* RX_FIFO_NOT_EMPTY */
++		DSSERR("RX fifo empty when trying to read.\n");
++		return -EIO;
++	}
 +
 +	val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
-+	if (debug)
-+		DSSDBG("\trawval %#08x\n", val);
-+	dt = FLD_GET(val, 7, 0);
++	if (dsi.debug_read)
++		DSSDBG("\theader: %08x\n", val);
++	dt = FLD_GET(val, 5, 0);
 +	if (dt == DSI_DT_RX_ACK_WITH_ERR) {
 +		u16 err = FLD_GET(val, 23, 8);
-+		DSSERR("\tACK with ERROR: %#x\n", err);
-+		if (err & (1 << 9))
-+			DSSERR("\t\tECC multibit\n");
-+		if (err & (1 << 11))
-+			DSSERR("\t\tData type not recognized\n");
-+		if (err & (1 << 12))
-+			DSSERR("\t\tInvalid VC ID\n");
++		dsi_show_rx_ack_with_err(err);
 +		return -1;
 +
 +	} else if (dt == DSI_DT_RX_SHORT_READ_1) {
 +		u8 data = FLD_GET(val, 15, 8);
-+		if (debug)
-+			DSSDBG("\tDCS short response, 1 byte: %#x\n", data);
++		if (dsi.debug_read)
++			DSSDBG("\tDCS short response, 1 byte: %02x\n", data);
 +
 +		if (buflen < 1)
 +			return -1;
@@ -5584,8 +8696,8 @@ index 0000000..e279571
 +		return 1;
 +	} else if (dt == DSI_DT_RX_SHORT_READ_2) {
 +		u16 data = FLD_GET(val, 23, 8);
-+		if (debug)
-+			DSSDBG("\tDCS short response, 2 byte: %#x\n", data);
++		if (dsi.debug_read)
++			DSSDBG("\tDCS short response, 2 byte: %04x\n", data);
 +
 +		if (buflen < 2)
 +			return -1;
@@ -5595,38 +8707,37 @@ index 0000000..e279571
 +
 +		return 2;
 +	} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
-+		int x;
++		int w;
 +		int len = FLD_GET(val, 23, 8);
-+		if (debug)
++		if (dsi.debug_read)
 +			DSSDBG("\tDCS long response, len %d\n", len);
 +
 +		if (len > buflen)
 +			return -1;
 +
-+		x = 0;
-+		while (x < len) {
++		/* two byte checksum ends the packet, not included in len */
++		for (w = 0; w < len + 2;) {
++			int b;
 +			val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
-+			if (debug)
-+				DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 "
-+						"%#02x\n",
++			if (dsi.debug_read)
++				DSSDBG("\t\t%02x %02x %02x %02x\n",
 +						(val >> 0) & 0xff,
 +						(val >> 8) & 0xff,
 +						(val >> 16) & 0xff,
 +						(val >> 24) & 0xff);
 +
-+			if (x < len)
-+				buf[x++] = (val >> 0) & 0xff;
-+			if (x < len)
-+				buf[x++] = (val >> 8) & 0xff;
-+			if (x < len)
-+				buf[x++] = (val >> 16) & 0xff;
-+			if (x < len)
-+				buf[x++] = (val >> 24) & 0xff;
++			for (b = 0; b < 4; ++b) {
++				if (w < len)
++					buf[w] = (val >> (b * 8)) & 0xff;
++				/* we discard the 2 byte checksum */
++				++w;
++			}
 +		}
 +
 +		return len;
++
 +	} else {
-+		DSSERR("\tunknown datatype\n");
++		DSSERR("\tunknown datatype 0x%02x\n", dt);
 +		return -1;
 +	}
 +}
@@ -5862,11 +8973,9 @@ index 0000000..e279571
 +	r = FLD_MOD(r, ddr_clk_post, 7, 0);
 +	dsi_write_reg(DSI_CLK_TIMING, r);
 +
-+#ifdef VERBOSE
 +	DSSDBG("ddr_clk_pre %d, ddr_clk_post %d\n",
 +			ddr_clk_pre,
 +			ddr_clk_post);
-+#endif
 +}
 +
 +
@@ -5900,7 +9009,7 @@ index 0000000..e279571
 +	int pixels_left;
 +	int bytespp = 3;
 +	int scr_width;
-+	u32 *data;
++	u32 __iomem *data;
 +	int start_offset;
 +	int horiz_inc;
 +	int current_x;
@@ -5911,7 +9020,7 @@ index 0000000..e279571
 +	DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n",
 +			x, y, w, h);
 +
-+	ovl = &display->manager->overlays[0];
++	ovl = display->manager->overlays[0];
 +
 +	if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U)
 +		return -EINVAL;
@@ -5919,9 +9028,6 @@ index 0000000..e279571
 +	if (display->ctrl->pixel_size != 24)
 +		return -EINVAL;
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
-+
 +	scr_width = ovl->info.screen_width;
 +	data = ovl->info.vaddr;
 +
@@ -5953,11 +9059,13 @@ index 0000000..e279571
 +
 +	data += start_offset;
 +
++#ifdef DEBUG
 +	dsi.update_region.x = x;
 +	dsi.update_region.y = y;
 +	dsi.update_region.w = w;
 +	dsi.update_region.h = h;
 +	dsi.update_region.bytespp = bytespp;
++#endif
 +
 +	perf_mark_start();
 +
@@ -5979,7 +9087,6 @@ index 0000000..e279571
 +				DSSERR("fifo stalls overflow, pixels left %d\n",
 +						pixels_left);
 +				dsi_if_enable(0);
-+				enable_clocks(0);
 +				return -EIO;
 +			}
 +		}
@@ -5992,7 +9099,6 @@ index 0000000..e279571
 +				DSSERR("fifo stalls overflow, pixels left %d\n",
 +					       pixels_left);
 +				dsi_if_enable(0);
-+				enable_clocks(0);
 +				return -EIO;
 +			}
 +		}
@@ -6003,7 +9109,6 @@ index 0000000..e279571
 +				DSSERR("fifo stalls overflow, pixels left %d\n",
 +					       pixels_left);
 +				dsi_if_enable(0);
-+				enable_clocks(0);
 +				return -EIO;
 +			}
 +		}
@@ -6018,7 +9123,7 @@ index 0000000..e279571
 +		DSI_PUSH(0, dcs_cmd);
 +
 +		while (pixels-- > 0) {
-+			u32 pix = *data++;
++			u32 pix = __raw_readl(data++);
 +
 +			DSI_PUSH(0, (pix >> 16) & 0xff);
 +			DSI_PUSH(0, (pix >> 8) & 0xff);
@@ -6036,9 +9141,6 @@ index 0000000..e279571
 +
 +	perf_show("L4");
 +
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
-+
 +	return 0;
 +}
 +
@@ -6136,74 +9238,60 @@ index 0000000..e279571
 +}
 +#endif
 +
-+static int dsi_wait_for_framedone(int stop_update)
-+{
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&dsi.update_lock, flags);
-+	if (dsi.update_ongoing) {
-+		long wait = msecs_to_jiffies(1000);
-+		dsi.update_syncers++;
-+		if (stop_update)
-+			dsi.update_mode = OMAP_DSS_UPDATE_DISABLED;
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
-+		wait = wait_for_completion_timeout(&dsi.update_completion,
-+				wait);
-+		if (wait == 0) {
-+			DSSERR("timeout waiting sync\n");
-+			return -ETIME;
-+		}
-+	} else {
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
-+	}
-+
-+	return 0;
-+}
-+
 +static void dsi_setup_update_dispc(struct omap_display *display,
-+			int x, int y, int w, int h)
++			u16 x, u16 y, u16 w, u16 h)
 +{
-+	int bytespp = 3;
-+
 +	DSSDBG("dsi_setup_update_dispc(%d,%d %dx%d)\n",
 +			x, y, w, h);
 +
-+	dsi.update_region.display = display;
++#ifdef DEBUG
 +	dsi.update_region.x = x;
 +	dsi.update_region.y = y;
 +	dsi.update_region.w = w;
 +	dsi.update_region.h = h;
-+	dsi.update_region.bytespp = bytespp;
-+
-+	enable_clocks(1);
++	dsi.update_region.bytespp = 3; // XXX
++#endif
 +
 +	dispc_setup_partial_planes(display, &x, &y, &w, &h);
 +
 +	dispc_set_lcd_size(w, h);
++}
 +
-+	enable_clocks(0);
++static void dsi_setup_autoupdate_dispc(struct omap_display *display)
++{
++	u16 w, h;
++
++	display->get_resolution(display, &w, &h);
++
++#ifdef DEBUG
++	dsi.update_region.x = 0;
++	dsi.update_region.y = 0;
++	dsi.update_region.w = w;
++	dsi.update_region.h = h;
++	dsi.update_region.bytespp = 3; // XXX
++#endif
++
++	/* the overlay settings may not have been applied, if we were in manual
++	 * mode earlier, so do it here */
++	display->manager->apply(display->manager);
++
++	dispc_set_lcd_size(w, h);
++
++	dsi.autoupdate_setup = 0;
 +}
 +
-+static void dsi_update_screen_dispc(struct omap_display *display)
++static void dsi_update_screen_dispc(struct omap_display *display,
++		u16 x, u16 y, u16 w, u16 h)
 +{
 +	int bytespp = 3;
 +	int total_len;
 +	int line_packet_len;
-+	int x, y, w, h;
 +	u32 l;
 +
-+	x = dsi.update_region.x;
-+	y = dsi.update_region.y;
-+	w = dsi.update_region.w;
-+	h = dsi.update_region.h;
-+
-+	if (dsi.user_update_mode != OMAP_DSS_UPDATE_AUTO)
++	if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL)
 +		DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
 +				x, y, w, h);
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
-+
 +	/* TODO: one packet could be longer, I think? Max is the line buffer */
 +	line_packet_len = w * bytespp + 1;	/* 1 byte for DCS cmd */
 +	total_len = line_packet_len * h;
@@ -6246,18 +9334,11 @@ index 0000000..e279571
 +	 * is sending the data. Thus we have to wait until we can do a new
 +	 * transfer or turn the clocks off. We do that in a separate work
 +	 * func. */
-+	/* XXX When using auto update and delay value 0, the kernel seems to be
-+	 * very relaxed about when to call our callback. It may take a second.
-+	 * Thus we use a delay of 1 */
-+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
-+		schedule_delayed_work(&dsi.framedone_work, 1);
-+	else
-+		schedule_delayed_work(&dsi.framedone_work, 0);
++	queue_work(dsi.workqueue, &dsi.framedone_work);
 +}
 +
 +static void framedone_worker(struct work_struct *work)
 +{
-+	unsigned long flags;
 +	u32 l;
 +	unsigned long tmo;
 +	int i = 0;
@@ -6284,17 +9365,9 @@ index 0000000..e279571
 +	if (REG_GET(DSI_VC_TE(1), 31, 31))
 +		DSSERR("TE_START not zero\n");
 +
-+	spin_lock_irqsave(&dsi.update_lock, flags);
-+	if (dsi.update_ongoing == 0) {
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
-+		DSSERR("framedone irq without update request\n");
-+		return;
-+	}
-+	spin_unlock_irqrestore(&dsi.update_lock, flags);
-+
 +	perf_show("DISPC");
 +
-+	if (dsi.user_update_mode != OMAP_DSS_UPDATE_AUTO)
++	if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL)
 +		DSSDBG("FRAMEDONE\n");
 +
 +#if 0
@@ -6308,110 +9381,528 @@ index 0000000..e279571
 +#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
 +	dispc_fake_vsync_irq();
 +#endif
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
-+
 +	dsi.framedone_scheduled = 0;
 +
-+	spin_lock_irqsave(&dsi.update_lock, flags);
++	/* XXX check that fifo is not full. otherwise we would sleep and never
++	 * get to process_cmd_fifo below */
++	/* We check for target_update_mode, not update_mode. No reason to push
++	 * new updates if we're turning auto update off */
++	if (dsi.target_update_mode == OMAP_DSS_UPDATE_AUTO)
++		dsi_push_autoupdate(dsi.vc[1].display);
++
++	atomic_set(&dsi.cmd_pending, 0);
++	dsi_process_cmd_fifo(NULL);
++}
++
++static void dsi_start_auto_update(struct omap_display *display)
++{
++	DSSDBG("starting auto update\n");
++
++	dsi.autoupdate_setup = 1;
++
++	dsi_push_autoupdate(display);
++}
++
++
++
++
++
++
++
++
++
++
++
 +
-+	if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO)
-+		dsi.update_ongoing = 0;
 +
-+	while (dsi.update_syncers > 0) {
-+		complete(&dsi.update_completion);
-+		--dsi.update_syncers;
++/* FIFO functions */
++
++static void dsi_signal_fifo_waiters(void)
++{
++	if (atomic_read(&dsi.cmd_fifo_full) > 0) {
++		DSSDBG("SIGNALING: Fifo not full for waiter!\n");
++		complete(&dsi.cmd_done);
++		atomic_dec(&dsi.cmd_fifo_full);
 +	}
++}
 +
-+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) {
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
-+		dsi_update_screen_dispc(dsi.update_region.display);
++/* returns 1 for async op, and 0 for sync op */
++static int dsi_do_update(struct omap_display *display,
++		struct dsi_cmd_update *upd)
++{
++	int r;
++	u16 x = upd->x, y = upd->y, w = upd->w, h = upd->h;
++	u16 dw, dh;
++
++	if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
++		return 0;
++
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return 0;
++
++	display->get_resolution(display, &dw, &dh);
++	if  (x > dw || y > dh)
++		return 0;
++
++	if (x + w > dw)
++		w = dw - x;
++
++	if (y + h > dh)
++		h = dh - y;
++
++	DSSDBGF("%d,%d %dx%d", x, y, w, h);
++
++	perf_mark_setup();
++
++	if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
++		dsi_setup_update_dispc(display, x, y, w, h);
++		dsi_update_screen_dispc(display, x, y, w, h);
++		return 1;
 +	} else {
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
++		r = dsi_update_screen_l4(display, x, y, w, h);
++		if (r)
++			DSSERR("L4 update failed\n");
++		return 0;
 +	}
 +}
 +
-+static void dsi_start_auto_update(struct omap_display *display)
++/* returns 1 for async op, and 0 for sync op */
++static int dsi_do_autoupdate(struct omap_display *display)
 +{
-+	unsigned long flags;
-+	int bytespp = 3;
++	int r;
++	u16 w, h;
 +
-+	DSSDBG("starting auto update\n");
++	if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED)
++		return 0;
 +
-+	dsi.update_region.display = display;
-+	dsi.update_region.x = 0;
-+	dsi.update_region.y = 0;
-+	dsi.update_region.w = display->panel->timings.x_res;
-+	dsi.update_region.h = display->panel->timings.y_res;
-+	dsi.update_region.bytespp = bytespp;
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return 0;
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
++	display->get_resolution(display, &w, &h);
 +
-+	dispc_set_lcd_size(display->panel->timings.x_res,
-+			display->panel->timings.y_res);
++	perf_mark_setup();
 +
-+	spin_lock_irqsave(&dsi.update_lock, flags);
-+	dsi.update_ongoing = 1;
-+	spin_unlock_irqrestore(&dsi.update_lock, flags);
-+	dsi_update_screen_dispc(display);
++	if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
++		if (dsi.autoupdate_setup)
++			dsi_setup_autoupdate_dispc(display);
++		dsi_update_screen_dispc(display, 0, 0, w, h);
++		return 1;
++	} else {
++		r = dsi_update_screen_l4(display, 0, 0, w, h);
++		if (r)
++			DSSERR("L4 update failed\n");
++		return 0;
++	}
 +}
 +
-+static void dsi_stop_auto_update(void)
++static void dsi_do_cmd_mem_read(struct omap_display *display,
++		struct dsi_cmd_mem_read *mem_read)
 +{
-+	DSSDBG("waiting for display to finish.\n");
-+	dsi_wait_for_framedone(1);
-+	DSSDBG("done waiting\n");
++	int r;
++	r = display->ctrl->memory_read(display,
++			mem_read->buf,
++			mem_read->size,
++			mem_read->x,
++			mem_read->y,
++			mem_read->w,
++			mem_read->h);
 +
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
++	*mem_read->ret_size = (size_t)r;
++	complete(mem_read->completion);
 +}
 +
-+static int dsi_set_update_mode(struct omap_display *display,
-+		enum omap_dss_update_mode mode)
++static void dsi_do_cmd_test(struct omap_display *display,
++		struct dsi_cmd_test *test)
 +{
-+	if (mode == dsi.update_mode)
-+		return 0;
++	int r = 0;
 +
-+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
-+		dsi_stop_auto_update();
-+	else if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL)
-+		dsi_wait_for_framedone(0);
++	DSSDBGF("");
 +
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return;
++
++	/* run test first in low speed mode */
++	dsi_vc_enable_hs(0, 0);
++
++	if (display->ctrl->run_test) {
++		r = display->ctrl->run_test(display, test->test_num);
++		if (r)
++			goto end;
++	}
++
++	if (display->panel->run_test) {
++		r = display->panel->run_test(display, test->test_num);
++		if (r)
++			goto end;
++	}
++
++	/* then in high speed */
++	dsi_vc_enable_hs(0, 1);
++
++	if (display->ctrl->run_test) {
++		r = display->ctrl->run_test(display, test->test_num);
++		if (r)
++			goto end;
++	}
++
++	if (display->panel->run_test)
++		r = display->panel->run_test(display, test->test_num);
++
++end:
++	dsi_vc_enable_hs(0, 1);
++
++	*test->result = r;
++	complete(test->completion);
++
++	DSSDBG("test end\n");
++}
++
++static void dsi_do_cmd_set_te(struct omap_display *display, bool enable)
++{
++	dsi.use_te = enable;
++
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return;
++
++	display->ctrl->enable_te(display, enable);
++
++	if (enable) {
++		/* disable LP_RX_TO, so that we can receive TE.
++		 * Time to wait for TE is longer than the timer allows */
++		REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
++	} else {
++		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
++	}
++}
++
++static void dsi_do_cmd_set_update_mode(struct omap_display *display,
++	       enum omap_dss_update_mode mode)
++{
 +	dsi.update_mode = mode;
 +
-+	if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return;
++
++	if (mode == OMAP_DSS_UPDATE_AUTO)
 +		dsi_start_auto_update(display);
++}
 +
-+	return 0;
++static void dsi_process_cmd_fifo(struct work_struct *work)
++{
++	int len;
++	struct dsi_cmd_item p;
++	unsigned long flags;
++	struct omap_display *display;
++	int exit = 0;
++
++	if (dsi.debug_process)
++		DSSDBGF("");
++
++	if (atomic_cmpxchg(&dsi.cmd_pending, 0, 1) == 1) {
++		if (dsi.debug_process)
++			DSSDBG("cmd pending, skip process\n");
++		return;
++	}
++
++	while (!exit) {
++		spin_lock_irqsave(dsi.cmd_fifo->lock, flags);
++
++		len = __kfifo_get(dsi.cmd_fifo, (unsigned char *)&p,
++				  sizeof(p));
++		if (len == 0) {
++			if (dsi.debug_process)
++				DSSDBG("nothing more in fifo, atomic clear\n");
++			atomic_set(&dsi.cmd_pending, 0);
++			spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags);
++			break;
++		}
++
++		spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags);
++
++		BUG_ON(len != sizeof(p));
++
++		display = p.display;
++
++		if (dsi.debug_process)
++			DSSDBG("processing cmd %d\n", p.cmd);
++
++		switch (p.cmd) {
++		case DSI_CMD_UPDATE:
++			if (dsi_do_update(display, &p.u.r)) {
++				if (dsi.debug_process)
++					DSSDBG("async update\n");
++				exit = 1;
++			} else {
++				if (dsi.debug_process)
++					DSSDBG("sync update\n");
++			}
++			break;
++
++		case DSI_CMD_AUTOUPDATE:
++			if (dsi_do_autoupdate(display)) {
++				if (dsi.debug_process)
++					DSSDBG("async autoupdate\n");
++				exit = 1;
++			} else {
++				if (dsi.debug_process)
++					DSSDBG("sync autoupdate\n");
++			}
++			break;
++
++		case DSI_CMD_SYNC:
++			if (dsi.debug_process)
++				DSSDBG("Signaling SYNC done!\n");
++			complete(p.u.sync);
++			break;
++
++		case DSI_CMD_MEM_READ:
++			dsi_do_cmd_mem_read(display, &p.u.mem_read);
++			break;
++
++		case DSI_CMD_TEST:
++			dsi_do_cmd_test(display, &p.u.test);
++			break;
++
++		case DSI_CMD_SET_TE:
++			dsi_do_cmd_set_te(display, p.u.te);
++			break;
++
++		case DSI_CMD_SET_UPDATE_MODE:
++			dsi_do_cmd_set_update_mode(display, p.u.update_mode);
++			break;
++
++		case DSI_CMD_SET_ROTATE:
++			display->ctrl->set_rotate(display, p.u.rotate);
++			if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO)
++				dsi.autoupdate_setup = 1;
++			break;
++
++		case DSI_CMD_SET_MIRROR:
++			display->ctrl->set_mirror(display, p.u.mirror);
++			break;
++
++		default:
++			BUG();
++		}
++	}
++
++	if (dsi.debug_process)
++		DSSDBG("exit dsi_process_cmd_fifo\n");
++
++	dsi_signal_fifo_waiters();
 +}
 +
-+/* Display funcs */
++static void dsi_push_cmd(struct dsi_cmd_item *p)
++{
++	int ret;
 +
-+static int dsi_display_enable(struct omap_display *display)
++	if (dsi.debug_process)
++		DSSDBGF("");
++
++	while (1) {
++		unsigned long flags;
++		unsigned avail, used;
++
++		spin_lock_irqsave(dsi.cmd_fifo->lock, flags);
++		used = __kfifo_len(dsi.cmd_fifo) / sizeof(struct dsi_cmd_item);
++		avail = DSI_CMD_FIFO_LEN - used;
++
++		if (dsi.debug_process)
++			DSSDBG("%u/%u items left in fifo\n", avail, used);
++
++		if (avail == 0) {
++			if (dsi.debug_process)
++				DSSDBG("cmd fifo full, waiting...\n");
++			spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags);
++			atomic_inc(&dsi.cmd_fifo_full);
++			wait_for_completion(&dsi.cmd_done);
++			if (dsi.debug_process)
++				DSSDBG("cmd fifo not full, woke up\n");
++			continue;
++		}
++
++		ret = __kfifo_put(dsi.cmd_fifo, (unsigned char *)p,
++				sizeof(*p));
++
++		spin_unlock_irqrestore(dsi.cmd_fifo->lock, flags);
++
++		BUG_ON(ret != sizeof(*p));
++
++		break;
++	}
++
++	queue_work(dsi.workqueue, &dsi.process_work);
++}
++
++static void dsi_push_update(struct omap_display *display,
++		int x, int y, int w, int h)
 +{
-+	int r = 0;
-+	struct dsi_clock_info cinfo;
-+	u32 low, high;
++	struct dsi_cmd_item p;
 +
-+	DSSDBG("dsi_display_enable\n");
++	p.display = display;
++	p.cmd = DSI_CMD_UPDATE;
 +
-+	mutex_lock(&dsi.lock);
++	p.u.r.x = x;
++	p.u.r.y = y;
++	p.u.r.w = w;
++	p.u.r.h = h;
 +
-+	if (display->state != OMAP_DSS_DISPLAY_DISABLED) {
-+		DSSERR("display already enabled\n");
-+		r = -EINVAL;
-+		goto err0;
++	DSSDBG("pushing UPDATE %d,%d %dx%d\n", x, y, w, h);
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_autoupdate(struct omap_display *display)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_AUTOUPDATE;
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_sync(struct omap_display *display,
++		struct completion *sync_comp)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_SYNC;
++	p.u.sync = sync_comp;
++
++	DSSDBG("pushing SYNC\n");
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_mem_read(struct omap_display *display,
++		struct dsi_cmd_mem_read *mem_read)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_MEM_READ;
++	p.u.mem_read = *mem_read;
++
++	DSSDBG("pushing MEM_READ\n");
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_test(struct omap_display *display, int test_num,
++		int *result, struct completion *completion)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_TEST;
++	p.u.test.test_num = test_num;
++	p.u.test.result = result;
++	p.u.test.completion = completion;
++
++	DSSDBG("pushing TEST\n");
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_set_te(struct omap_display *display, bool enable)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_SET_TE;
++	p.u.te = enable;
++
++	DSSDBG("pushing SET_TE\n");
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_set_update_mode(struct omap_display *display,
++		enum omap_dss_update_mode mode)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_SET_UPDATE_MODE;
++	p.u.update_mode = mode;
++
++	DSSDBG("pushing SET_UPDATE_MODE\n");
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_set_rotate(struct omap_display *display, int rotate)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_SET_ROTATE;
++	p.u.rotate = rotate;
++
++	DSSDBG("pushing SET_ROTATE\n");
++
++	dsi_push_cmd(&p);
++}
++
++static void dsi_push_set_mirror(struct omap_display *display, int mirror)
++{
++	struct dsi_cmd_item p;
++
++	p.display = display;
++	p.cmd = DSI_CMD_SET_MIRROR;
++	p.u.mirror = mirror;
++
++	DSSDBG("pushing SET_MIRROR\n");
++
++	dsi_push_cmd(&p);
++}
++
++static int dsi_wait_sync(struct omap_display *display)
++{
++	long wait = msecs_to_jiffies(60000);
++	struct completion compl;
++
++	DSSDBGF("");
++
++	init_completion(&compl);
++	dsi_push_sync(display, &compl);
++
++	DSSDBG("Waiting for SYNC to happen...\n");
++	wait = wait_for_completion_timeout(&compl, wait);
++	DSSDBG("Released from SYNC\n");
++
++	if (wait == 0) {
++		DSSERR("timeout waiting sync\n");
++		return -ETIME;
 +	}
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
++	return 0;
++}
++
++
++
++
++
++
++
++
++
++
++
++
++/* Display funcs */
++
++static int dsi_display_init_dispc(struct omap_display *display)
++{
++	int r;
 +
 +	r = omap_dispc_register_isr(framedone_callback, NULL,
 +			DISPC_IRQ_FRAMEDONE);
 +	if (r) {
 +		DSSERR("can't get FRAMEDONE irq\n");
-+		goto err1;
++		return r;
 +	}
 +
 +	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
@@ -6419,22 +9910,6 @@ index 0000000..e279571
 +	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI);
 +	dispc_enable_fifohandcheck(1);
 +
-+	dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32);
-+	dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32);
-+	dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32);
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_GFX) - (16*32/8);
-+	low = 0;
-+	dispc_setup_plane_fifo(OMAP_DSS_GFX, low, high);
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) - (16*32/8);
-+	low = 0;
-+	dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, low, high);
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) - (16*32/8);
-+	low = 0;
-+	dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, low, high);
-+
 +	dispc_set_tft_data_lines(display->ctrl->pixel_size);
 +
 +	{
@@ -6450,25 +9925,39 @@ index 0000000..e279571
 +		dispc_set_lcd_timings(&timings);
 +	}
 +
++	return 0;
++}
++
++static void dsi_display_uninit_dispc(struct omap_display *display)
++{
++	omap_dispc_unregister_isr(framedone_callback, NULL,
++			DISPC_IRQ_FRAMEDONE);
++}
++
++static int dsi_display_init_dsi(struct omap_display *display)
++{
++	struct dsi_clock_info cinfo;
++	int r;
++
 +	_dsi_print_reset_status();
 +
 +	r = dsi_pll_init(1, 0);
 +	if (r)
-+		goto err2;
++		goto err0;
 +
 +	r = dsi_pll_calc_ddrfreq(display->hw_config.u.dsi.ddr_clk_hz, &cinfo);
 +	if (r)
-+		goto err3;
++		goto err1;
 +
 +	r = dsi_pll_program(&cinfo);
 +	if (r)
-+		goto err3;
++		goto err1;
 +
 +	DSSDBG("PLL OK\n");
 +
 +	r = dsi_complexio_init(display);
 +	if (r)
-+		goto err3;
++		goto err1;
 +
 +	_dsi_print_reset_status();
 +
@@ -6480,7 +9969,7 @@ index 0000000..e279571
 +
 +	r = dsi_proto_config(display);
 +	if (r)
-+		goto err4;
++		goto err2;
 +
 +	/* enable interface */
 +	dsi_vc_enable(0, 1);
@@ -6488,51 +9977,107 @@ index 0000000..e279571
 +	dsi_if_enable(1);
 +	dsi_force_tx_stop_mode_io();
 +
-+
 +	if (display->ctrl && display->ctrl->enable) {
 +		r = display->ctrl->enable(display);
 +		if (r)
-+			goto err5;
++			goto err3;
 +	}
 +
 +	if (display->panel && display->panel->enable) {
 +		r = display->panel->enable(display);
 +		if (r)
-+			goto err6;
-+	}
-+
-+	if (dsi.use_te) {
-+		r = display->ctrl->enable_te(display, 1);
-+		if (r)
-+			goto err7;
++			goto err4;
 +	}
 +
 +	/* enable high-speed after initial config */
 +	dsi_vc_enable_hs(0, 1);
 +
-+	display->state = OMAP_DSS_DISPLAY_ACTIVE;
-+
-+	dsi_set_update_mode(display, dsi.user_update_mode);
-+
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
-+	mutex_unlock(&dsi.lock);
-+
 +	return 0;
-+err7:
++err4:
++	if (display->ctrl && display->ctrl->disable)
++		display->ctrl->disable(display);
++err3:
++	dsi_if_enable(0);
++err2:
++	dsi_complexio_uninit();
++err1:
++	dsi_pll_uninit();
++err0:
++	return r;
++}
++
++static void dsi_display_uninit_dsi(struct omap_display *display)
++{
 +	if (display->panel && display->panel->disable)
 +		display->panel->disable(display);
-+err6:
 +	if (display->ctrl && display->ctrl->disable)
 +		display->ctrl->disable(display);
-+err5:
-+	dsi_if_enable(0);
-+err4:
++
 +	dsi_complexio_uninit();
-+err3:
 +	dsi_pll_uninit();
++}
++
++static int dsi_core_init(void)
++{
++	/* Autoidle */
++	REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0);
++
++	/* ENWAKEUP */
++	REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2);
++
++	/* SIDLEMODE smart-idle */
++	REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3);
++
++	_dsi_initialize_irq();
++
++	return 0;
++}
++
++static int dsi_display_enable(struct omap_display *display)
++{
++	int r = 0;
++
++	DSSDBG("dsi_display_enable\n");
++
++	mutex_lock(&dsi.lock);
++
++	if (display->state != OMAP_DSS_DISPLAY_DISABLED) {
++		DSSERR("display already enabled\n");
++		r = -EINVAL;
++		goto err0;
++	}
++
++	enable_clocks(1);
++	dsi_enable_pll_clock(1);
++
++	r = _dsi_reset();
++	if (r)
++		return r;
++
++	dsi_core_init();
++
++	r = dsi_display_init_dispc(display);
++	if (r)
++		goto err1;
++
++	r = dsi_display_init_dsi(display);
++	if (r)
++		goto err2;
++
++	display->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++	if (dsi.use_te)
++		dsi_push_set_te(display, 1);
++
++	dsi_push_set_update_mode(display, dsi.user_update_mode);
++	dsi.target_update_mode = dsi.user_update_mode;
++
++	mutex_unlock(&dsi.lock);
++
++	return dsi_wait_sync(display);
++
 +err2:
-+	omap_dispc_unregister_isr(framedone_callback);
++	dsi_display_uninit_dispc(display);
 +err1:
 +	enable_clocks(0);
 +	dsi_enable_pll_clock(0);
@@ -6548,25 +10093,22 @@ index 0000000..e279571
 +
 +	mutex_lock(&dsi.lock);
 +
-+	if (display->state == OMAP_DSS_DISPLAY_DISABLED)
++	if (display->state == OMAP_DSS_DISPLAY_DISABLED ||
++			display->state == OMAP_DSS_DISPLAY_SUSPENDED)
 +		goto end;
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
++	if (dsi.target_update_mode != OMAP_DSS_UPDATE_DISABLED) {
++		dsi_push_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED);
++		dsi.target_update_mode = OMAP_DSS_UPDATE_DISABLED;
++	}
 +
-+	dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED);
++	dsi_wait_sync(display);
 +
 +	display->state = OMAP_DSS_DISPLAY_DISABLED;
 +
-+	omap_dispc_unregister_isr(framedone_callback);
-+
-+	if (display->panel && display->panel->disable)
-+		display->panel->disable(display);
-+	if (display->ctrl && display->ctrl->disable)
-+		display->ctrl->disable(display);
++	dsi_display_uninit_dispc(display);
 +
-+	dsi_complexio_uninit();
-+	dsi_pll_uninit();
++	dsi_display_uninit_dsi(display);
 +
 +	enable_clocks(0);
 +	dsi_enable_pll_clock(0);
@@ -6576,14 +10118,9 @@ index 0000000..e279571
 +
 +static int dsi_display_suspend(struct omap_display *display)
 +{
-+	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
-+		return -EINVAL;
-+
-+	if (display->panel->suspend)
-+		display->panel->suspend(display);
++	DSSDBG("dsi_display_suspend\n");
 +
-+	if (display->ctrl->suspend)
-+		display->ctrl->suspend(display);
++	dsi_display_disable(display);
 +
 +	display->state = OMAP_DSS_DISPLAY_SUSPENDED;
 +
@@ -6592,26 +10129,15 @@ index 0000000..e279571
 +
 +static int dsi_display_resume(struct omap_display *display)
 +{
-+	if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
-+		return -EINVAL;
++	DSSDBG("dsi_display_resume\n");
 +
-+	if (display->panel->resume)
-+		display->panel->resume(display);
-+
-+	if (display->ctrl->resume)
-+		display->ctrl->resume(display);
-+
-+	display->state = OMAP_DSS_DISPLAY_ACTIVE;
-+
-+	return 0;
++	display->state = OMAP_DSS_DISPLAY_DISABLED;
++	return dsi_display_enable(display);
 +}
 +
 +static int dsi_display_update(struct omap_display *display,
-+			int x, int y, int w, int h)
++			u16 x, u16 y, u16 w, u16 h)
 +{
-+	unsigned long flags;
-+	int r = 0;
-+
 +	DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h);
 +
 +	if (w == 0 || h == 0)
@@ -6619,179 +10145,188 @@ index 0000000..e279571
 +
 +	mutex_lock(&dsi.lock);
 +
-+	if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL)
-+		goto end; /* XXX return error? */
++	if (dsi.target_update_mode == OMAP_DSS_UPDATE_MANUAL)
++		dsi_push_update(display, x, y, w, h);
++	/* XXX else return error? */
 +
-+	spin_lock_irqsave(&dsi.update_lock, flags);
-+
-+	if (dsi.update_ongoing) {
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
-+		DSSERR("DSI is busy\n");
-+		r = -EBUSY;
-+		goto end;
-+	}
++	mutex_unlock(&dsi.lock);
 +
-+	perf_mark_setup();
++	return 0;
++}
 +
-+	dsi.update_ongoing = 1;
++static int dsi_display_sync(struct omap_display *display)
++{
++	DSSDBGF("");
++	return dsi_wait_sync(display);
++}
 +
-+	if (dsi.update_syncers > 0)
-+		DSSERR("someone waiting for sync, and no update ongoing\n");
++static int dsi_display_set_update_mode(struct omap_display *display,
++		enum omap_dss_update_mode mode)
++{
++	DSSDBGF("%d", mode);
 +
-+	spin_unlock_irqrestore(&dsi.update_lock, flags);
++	mutex_lock(&dsi.lock);
 +
-+	if (display->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-+		dsi_setup_update_dispc(display, x, y, w, h);
-+		dsi_update_screen_dispc(display);
-+	} else {
-+		r = dsi_update_screen_l4(display, x, y, w, h);
-+		if (r)
-+			goto end;
++	if (dsi.target_update_mode != mode) {
++		dsi_push_set_update_mode(display, mode);
 +
-+		spin_lock_irqsave(&dsi.update_lock, flags);
-+		dsi.update_ongoing = 0;
-+		while (dsi.update_syncers > 0) {
-+			complete(&dsi.update_completion);
-+			--dsi.update_syncers;
-+		}
-+		spin_unlock_irqrestore(&dsi.update_lock, flags);
++		dsi.target_update_mode = mode;
++		dsi.user_update_mode = mode;
 +	}
 +
-+end:
 +	mutex_unlock(&dsi.lock);
-+	return r;
++
++	return dsi_wait_sync(display);
 +}
 +
-+static int dsi_display_sync(struct omap_display *display)
++static enum omap_dss_update_mode dsi_display_get_update_mode(
++		struct omap_display *display)
 +{
-+	int r = 0;
++	return dsi.update_mode;
++}
 +
-+	DSSDBG("dsi_display_sync\n");
++static int dsi_display_enable_te(struct omap_display *display, bool enable)
++{
++	DSSDBGF("%d", enable);
 +
-+	mutex_lock(&dsi.lock);
++	if (!display->ctrl->enable_te)
++		return -ENOENT;
 +
-+	if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL)
-+		goto end;
++	dsi_push_set_te(display, enable);
 +
-+	r = dsi_wait_for_framedone(0);
++	return dsi_wait_sync(display);
++}
 +
-+end:
-+	mutex_unlock(&dsi.lock);
-+	return r;
++static int dsi_display_get_te(struct omap_display *display)
++{
++	return dsi.use_te;
 +}
 +
-+static int dsi_display_set_update_mode(struct omap_display *display,
-+		enum omap_dss_update_mode mode)
++
++
++static int dsi_display_set_rotate(struct omap_display *display, u8 rotate)
 +{
-+	int r;
++	DSSDBGF("%d", rotate);
 +
-+	DSSDBG("dsi_display_set_update_mode\n");
++	if (!display->ctrl->set_rotate || !display->ctrl->get_rotate)
++		return -EINVAL;
 +
-+	mutex_lock(&dsi.lock);
++	dsi_push_set_rotate(display, rotate);
 +
-+	r = dsi_set_update_mode(display, mode);
-+	dsi.user_update_mode = mode;
++	return dsi_wait_sync(display);
++}
 +
-+	mutex_unlock(&dsi.lock);
++static u8 dsi_display_get_rotate(struct omap_display *display)
++{
++	if (!display->ctrl->set_rotate || !display->ctrl->get_rotate)
++		return 0;
 +
-+	return r;
++	return display->ctrl->get_rotate(display);
 +}
 +
-+static enum omap_dss_update_mode dsi_display_get_update_mode(
-+		struct omap_display *display)
++static int dsi_display_set_mirror(struct omap_display *display, bool mirror)
 +{
-+	return dsi.user_update_mode;
++	DSSDBGF("%d", mirror);
++
++	if (!display->ctrl->set_mirror || !display->ctrl->get_mirror)
++		return -EINVAL;
++
++	dsi_push_set_mirror(display, mirror);
++
++	return dsi_wait_sync(display);
 +}
 +
-+static int dsi_display_enable_te(struct omap_display *display, int enable)
++static bool dsi_display_get_mirror(struct omap_display *display)
 +{
-+	DSSDBG("dsi_display_enable_te\n");
++	if (!display->ctrl->set_mirror || !display->ctrl->get_mirror)
++		return 0;
 +
-+	mutex_lock(&dsi.lock);
++	return display->ctrl->get_mirror(display);
++}
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
++static int dsi_display_run_test(struct omap_display *display, int test_num)
++{
++	long wait = msecs_to_jiffies(60000);
++	struct completion compl;
++	int result;
 +
-+	dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED);
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return -EIO;
 +
-+	dsi.use_te = enable;
-+	display->ctrl->enable_te(display, enable);
-+	if (enable) {
-+		/* disable LP_RX_TO, so that we can receive TE.
-+		 * Time to wait for TE is longer than the timer allows */
-+		REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */
-+	} else {
-+		REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
-+	}
++	DSSDBGF("%d", test_num);
 +
-+	/* restore the old update mode */
-+	dsi_set_update_mode(display, dsi.user_update_mode);
++	init_completion(&compl);
 +
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
++	dsi_push_test(display, test_num, &result, &compl);
 +
-+	mutex_unlock(&dsi.lock);
++	DSSDBG("Waiting for SYNC to happen...\n");
++	wait = wait_for_completion_timeout(&compl, wait);
++	DSSDBG("Released from SYNC\n");
 +
-+	return 0;
-+}
++	if (wait == 0) {
++		DSSERR("timeout waiting test sync\n");
++		return -ETIME;
++	}
 +
-+static int dsi_display_get_te(struct omap_display *display)
-+{
-+	return dsi.use_te;
++	return result;
 +}
 +
-+static int dsi_display_run_test(struct omap_display *display, int test_num)
++static int dsi_display_memory_read(struct omap_display *display,
++		void *buf, size_t size,
++		u16 x, u16 y, u16 w, u16 h)
 +{
-+	int r = 0;
++	long wait = msecs_to_jiffies(60000);
++	struct completion compl;
++	struct dsi_cmd_mem_read mem_read;
++	size_t ret_size;
 +
-+	DSSDBG("dsi_display_run_test %d\n", test_num);
++	DSSDBGF("");
 +
-+	mutex_lock(&dsi.lock);
++	if (!display->ctrl->memory_read)
++		return -EINVAL;
 +
-+	enable_clocks(1);
-+	dsi_enable_pll_clock(1);
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return -EIO;
 +
-+	dsi_set_update_mode(display, OMAP_DSS_UPDATE_DISABLED);
++	init_completion(&compl);
 +
-+	/* run test first in low speed mode */
-+	dsi_vc_enable_hs(0, 0);
++	mem_read.x = x;
++	mem_read.y = y;
++	mem_read.w = w;
++	mem_read.h = h;
++	mem_read.buf = buf;
++	mem_read.size = size;
++	mem_read.ret_size = &ret_size;
++	mem_read.completion = &compl;
 +
-+	if (display->ctrl->run_test) {
-+		r = display->ctrl->run_test(display, test_num);
-+		if (r)
-+			goto fail;
-+	}
++	dsi_push_mem_read(display, &mem_read);
 +
-+	if (display->panel->run_test) {
-+		r = display->panel->run_test(display, test_num);
-+		if (r)
-+			goto fail;
-+	}
-+
-+	/* then in high speed */
-+	dsi_vc_enable_hs(0, 1);
++	DSSDBG("Waiting for SYNC to happen...\n");
++	wait = wait_for_completion_timeout(&compl, wait);
++	DSSDBG("Released from SYNC\n");
 +
-+	if (display->ctrl->run_test) {
-+		r = display->ctrl->run_test(display, test_num);
-+		if (r)
-+			goto fail;
++	if (wait == 0) {
++		DSSERR("timeout waiting mem read sync\n");
++		return -ETIME;
 +	}
 +
-+	if (display->panel->run_test)
-+		r = display->panel->run_test(display, test_num);
-+
-+fail:
-+	dsi_vc_enable_hs(0, 1);
++	return ret_size;
++}
 +
-+	/* restore the old update mode */
-+	dsi_set_update_mode(display, dsi.user_update_mode);
++static void dsi_configure_overlay(struct omap_overlay *ovl)
++{
++	unsigned low, high, size;
++	enum omap_burst_size burst;
++	enum omap_plane plane = ovl->id;
 +
-+	enable_clocks(0);
-+	dsi_enable_pll_clock(0);
++	burst = OMAP_DSS_BURST_16x32;
++	size = 16 * 32 / 8;
 +
-+	mutex_unlock(&dsi.lock);
++	dispc_set_burst_size(plane, burst);
 +
-+	return r;
++	high = dispc_get_plane_fifo_size(plane) - size;
++	low = 0;
++	dispc_setup_plane_fifo(plane, low, high);
 +}
 +
 +void dsi_init_display(struct omap_display *display)
@@ -6808,25 +10343,49 @@ index 0000000..e279571
 +	display->get_update_mode = dsi_display_get_update_mode;
 +	display->enable_te = dsi_display_enable_te;
 +	display->get_te = dsi_display_get_te;
++
++	display->get_rotate = dsi_display_get_rotate;
++	display->set_rotate = dsi_display_set_rotate;
++
++	display->get_mirror = dsi_display_get_mirror;
++	display->set_mirror = dsi_display_set_mirror;
++
 +	display->run_test = dsi_display_run_test;
++	display->memory_read = dsi_display_memory_read;
++
++	display->configure_overlay = dsi_configure_overlay;
 +
 +	display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
++
++	dsi.vc[0].display = display;
++	dsi.vc[1].display = display;
 +}
 +
 +int dsi_init(void)
 +{
 +	u32 rev;
 +
++	spin_lock_init(&dsi.cmd_lock);
++	dsi.cmd_fifo = kfifo_alloc(
++			DSI_CMD_FIFO_LEN * sizeof(struct dsi_cmd_item),
++			GFP_KERNEL,
++			&dsi.cmd_lock);
++
++	init_completion(&dsi.cmd_done);
++	atomic_set(&dsi.cmd_fifo_full, 0);
++	atomic_set(&dsi.cmd_pending, 0);
++
 +	init_completion(&dsi.bta_completion);
-+	INIT_DELAYED_WORK(&dsi.framedone_work, framedone_worker);
 +
-+	init_completion(&dsi.update_completion);
-+	spin_lock_init(&dsi.update_lock);
-+	dsi.update_ongoing = 0;
-+	dsi.update_syncers = 0;
++	dsi.workqueue = create_singlethread_workqueue("dsi");
++	INIT_WORK(&dsi.framedone_work, framedone_worker);
++	INIT_WORK(&dsi.process_work, dsi_process_cmd_fifo);
 +
 +	mutex_init(&dsi.lock);
 +
++	dsi.target_update_mode = OMAP_DSS_UPDATE_DISABLED;
++	dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED;
++
 +	dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS);
 +	if (!dsi.base) {
 +		DSSERR("can't ioremap DSI\n");
@@ -6835,17 +10394,6 @@ index 0000000..e279571
 +
 +	enable_clocks(1);
 +
-+	/* Autoidle */
-+	REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0);
-+
-+	/* ENWAKEUP */
-+	REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2);
-+
-+	/* SIDLEMODE smart-idle */
-+	REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3);
-+
-+	_dsi_initialize_irq();
-+
 +	rev = dsi_read_reg(DSI_REVISION);
 +	printk(KERN_INFO "OMAP DSI rev %d.%d\n",
 +	       FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
@@ -6857,21 +10405,26 @@ index 0000000..e279571
 +
 +void dsi_exit(void)
 +{
++	flush_workqueue(dsi.workqueue);
++	destroy_workqueue(dsi.workqueue);
++
 +	iounmap(dsi.base);
 +
++	kfifo_free(dsi.cmd_fifo);
++
 +	DSSDBG("omap_dsi_exit\n");
 +}
 +
-diff --git a/arch/arm/plat-omap/dss/dss.c b/arch/arm/plat-omap/dss/dss.c
+diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
 new file mode 100644
-index 0000000..4a403c1
+index 0000000..adc1f34
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/dss.c
-@@ -0,0 +1,774 @@
++++ b/drivers/video/omap2/dss/dss.c
+@@ -0,0 +1,345 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/dss.c
++ * linux/drivers/video/omap2/dss/dss.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * Some code and ideas taken from drivers/video/omap/ driver
@@ -6893,16 +10446,13 @@ index 0000000..4a403c1
 +#define DSS_SUBSYS_NAME "DSS"
 +
 +#include <linux/kernel.h>
-+#include <linux/module.h>
 +#include <linux/io.h>
-+#include <linux/clk.h>
 +#include <linux/err.h>
 +#include <linux/delay.h>
 +#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
++#include <linux/seq_file.h>
 +
 +#include <mach/display.h>
-+#include <mach/clock.h>
 +#include "dss.h"
 +
 +#define DSS_BASE			0x48050000
@@ -6933,33 +10483,11 @@ index 0000000..4a403c1
 +static struct {
 +	void __iomem    *base;
 +
-+	struct clk      *dss_ick;
-+	struct clk	*dss1_fck;
-+	struct clk	*dss2_fck;
-+	struct clk      *dss_54m_fck;
-+	struct clk	*dss_96m_fck;
-+
-+	unsigned	num_clks_enabled;
-+	struct platform_device *pdev;
-+	unsigned	ctx_id;
 +	u32		ctx[DSS_SZ_REGS / sizeof(u32)];
 +} dss;
 +
-+static void dss_clk_enable_all_no_ctx(void);
-+static void dss_clk_disable_all_no_ctx(void);
-+static void dss_clk_enable_no_ctx(enum dss_clock clks);
-+static void dss_clk_disable_no_ctx(enum dss_clock clks);
 +static int _omap_dss_wait_reset(void);
 +
-+static char *def_disp_name;
-+module_param_named(def_disp, def_disp_name, charp, 0);
-+MODULE_PARM_DESC(def_disp_name, "default display name");
-+
-+#ifdef DEBUG
-+unsigned int dss_debug;
-+module_param_named(debug, dss_debug, bool, 0644);
-+#endif
-+
 +static inline void dss_write_reg(const struct dss_reg idx, u32 val)
 +{
 +	__raw_writel(val, dss.base + idx.idx);
@@ -6975,72 +10503,38 @@ index 0000000..4a403c1
 +#define RR(reg) \
 +	dss_write_reg(DSS_##reg, dss.ctx[(DSS_##reg).idx / sizeof(u32)])
 +
-+static void dss_save_context(void)
++void dss_save_context(void)
 +{
 +	if (cpu_is_omap24xx())
 +		return;
 +
 +	SR(SYSCONFIG);
 +	SR(CONTROL);
++
++#ifdef CONFIG_OMAP2_DSS_SDI
 +	SR(SDI_CONTROL);
 +	SR(PLL_CONTROL);
++#endif
 +}
 +
-+static void dss_restore_context(void)
++void dss_restore_context(void)
 +{
++	if (_omap_dss_wait_reset())
++		DSSERR("DSS not coming out of reset after sleep\n");
++
 +	RR(SYSCONFIG);
 +	RR(CONTROL);
++
++#ifdef CONFIG_OMAP2_DSS_SDI
 +	RR(SDI_CONTROL);
 +	RR(PLL_CONTROL);
++#endif
 +}
 +
 +#undef SR
 +#undef RR
 +
-+static unsigned dss_get_ctx_id(void)
-+{
-+	struct omap_dss_platform_data *pdata = dss.pdev->dev.platform_data;
-+
-+	if (!pdata->get_last_off_on_transaction_id)
-+		return 0;
-+
-+	return pdata->get_last_off_on_transaction_id(&dss.pdev->dev);
-+}
-+
-+static void save_all_ctx(void)
-+{
-+	DSSDBG("save context\n");
-+
-+	dss_clk_enable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
-+
-+	dss_save_context();
-+	dispc_save_context();
-+#ifdef CONFIG_OMAP2_DSS_DSI
-+	dsi_save_context();
-+#endif
-+
-+	dss_clk_disable_no_ctx(DSS_CLK_ICK | DSS_CLK_FCK1);
-+}
-+
-+static void restore_all_ctx(void)
-+{
-+	DSSDBG("restore context\n");
-+
-+	dss_clk_enable_all_no_ctx();
-+
-+	if (_omap_dss_wait_reset())
-+		DSSERR("DSS not coming out of reset after sleep\n");
-+
-+	dss_restore_context();
-+	dispc_restore_context();
-+#ifdef CONFIG_OMAP2_DSS_DSI
-+	dsi_restore_context();
-+#endif
-+
-+	dss_clk_disable_all_no_ctx();
-+}
-+
-+void dss_sdi_init(int datapairs)
++void dss_sdi_init(u8 datapairs)
 +{
 +	u32 l;
 +
@@ -7057,6 +10551,11 @@ index 0000000..4a403c1
 +	l = FLD_MOD(l, 0xb, 16, 11);	/* SDI_PLL_REGN */
 +	l = FLD_MOD(l, 0xb4, 10, 1);	/* SDI_PLL_REGM */
 +	dss_write_reg(DSS_PLL_CONTROL, l);
++}
++
++void dss_sdi_enable(void)
++{
++	dispc_pck_free_enable(1);
 +
 +	/* Reset SDI PLL */
 +	REG_FLD_MOD(DSS_PLL_CONTROL, 1, 18, 18); /* SDI_PLL_SYSRESET */
@@ -7079,239 +10578,40 @@ index 0000000..4a403c1
 +	dispc_lcd_enable_signal(1);
 +
 +	/* Waiting for SDI reset to complete */
-+	while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 5)))
++	while (!(dss_read_reg(DSS_SDI_STATUS) & (1 << 2)))
 +		;
 +}
 +
-+ssize_t dss_print_clocks(char *buf, ssize_t size)
++void dss_sdi_disable(void)
 +{
-+	ssize_t l = 0;
-+	int i;
-+	struct clk *clocks[5] = {
-+		dss.dss_ick,
-+		dss.dss1_fck,
-+		dss.dss2_fck,
-+		dss.dss_54m_fck,
-+		dss.dss_96m_fck
-+	};
-+
-+	l += snprintf(buf + l, size - l, "- dss -\n");
-+
-+	l += snprintf(buf + l, size - l, "internal clk count\t%u\n",
-+			dss.num_clks_enabled);
-+
-+	for (i = 0; i < 5; i++) {
-+		if (!clocks[i])
-+			continue;
-+		l += snprintf(buf + l, size - l, "%-15s\t%lu\t%d\n",
-+				clocks[i]->name,
-+				clk_get_rate(clocks[i]),
-+				clk_get_usecount(clocks[i]));
-+	}
-+
-+	return l;
-+}
-+
-+static int get_dss_clocks(void)
-+{
-+	const struct {
-+		struct clk **clock;
-+		char *omap2_name;
-+		char *omap3_name;
-+	} clocks[5] = {
-+		{ &dss.dss_ick, "dss_ick", "dss_ick" },	/* L3 & L4 ick */
-+		{ &dss.dss1_fck, "dss1_fck", "dss1_alwon_fck" },
-+		{ &dss.dss2_fck, "dss2_fck", "dss2_alwon_fck" },
-+		{ &dss.dss_54m_fck, "dss_54m_fck", "dss_tv_fck" },
-+		{ &dss.dss_96m_fck, NULL, "dss_96m_fck" },
-+	};
-+
-+	int r = 0;
-+	int i;
-+	const int num_clocks = 5;
-+
-+	for (i = 0; i < num_clocks; i++)
-+		*clocks[i].clock = NULL;
-+
-+	for (i = 0; i < num_clocks; i++) {
-+		struct clk *clk;
-+		const char *clk_name;
-+
-+		clk_name = cpu_is_omap34xx() ? clocks[i].omap3_name
-+			: clocks[i].omap2_name;
-+
-+		if (!clk_name)
-+			continue;
++	dispc_lcd_enable_signal(0);
 +
-+		clk = clk_get(NULL, clk_name);
-+
-+		if (IS_ERR(clk)) {
-+			DSSERR("can't get clock %s", clk_name);
-+			r = PTR_ERR(clk);
-+			goto err;
-+		}
-+
-+		DSSDBG("clk %s, rate %ld\n",
-+				clk_name, clk_get_rate(clk));
-+
-+		*clocks[i].clock = clk;
-+	}
-+
-+	return 0;
-+
-+err:
-+	for (i = 0; i < num_clocks; i++) {
-+		if (!IS_ERR(*clocks[i].clock))
-+			clk_put(*clocks[i].clock);
-+	}
-+
-+	return r;
-+}
-+
-+static void put_dss_clocks(void)
-+{
-+	if (dss.dss_96m_fck)
-+		clk_put(dss.dss_96m_fck);
-+	clk_put(dss.dss_54m_fck);
-+	clk_put(dss.dss1_fck);
-+	clk_put(dss.dss2_fck);
-+	clk_put(dss.dss_ick);
-+}
-+
-+unsigned long dss_clk_get_rate(enum dss_clock clk)
-+{
-+	switch (clk) {
-+	case DSS_CLK_ICK:
-+		return clk_get_rate(dss.dss_ick);
-+	case DSS_CLK_FCK1:
-+		return clk_get_rate(dss.dss1_fck);
-+	case DSS_CLK_FCK2:
-+		return clk_get_rate(dss.dss2_fck);
-+	case DSS_CLK_54M:
-+		return clk_get_rate(dss.dss_54m_fck);
-+	case DSS_CLK_96M:
-+		return clk_get_rate(dss.dss_96m_fck);
-+	}
-+
-+	BUG();
-+	return 0;
-+}
-+
-+static unsigned count_clk_bits(enum dss_clock clks)
-+{
-+	unsigned num_clks = 0;
-+
-+	if (clks & DSS_CLK_ICK)
-+		++num_clks;
-+	if (clks & DSS_CLK_FCK1)
-+		++num_clks;
-+	if (clks & DSS_CLK_FCK2)
-+		++num_clks;
-+	if (clks & DSS_CLK_54M)
-+		++num_clks;
-+	if (clks & DSS_CLK_96M)
-+		++num_clks;
-+
-+	return num_clks;
-+}
-+
-+static void dss_clk_enable_no_ctx(enum dss_clock clks)
-+{
-+	unsigned num_clks = count_clk_bits(clks);
-+
-+	if (clks & DSS_CLK_ICK)
-+		clk_enable(dss.dss_ick);
-+	if (clks & DSS_CLK_FCK1)
-+		clk_enable(dss.dss1_fck);
-+	if (clks & DSS_CLK_FCK2)
-+		clk_enable(dss.dss2_fck);
-+	if (clks & DSS_CLK_54M)
-+		clk_enable(dss.dss_54m_fck);
-+	if (clks & DSS_CLK_96M)
-+		clk_enable(dss.dss_96m_fck);
-+
-+	dss.num_clks_enabled += num_clks;
-+}
-+
-+void dss_clk_enable(enum dss_clock clks)
-+{
-+	dss_clk_enable_no_ctx(clks);
-+
-+	if (cpu_is_omap34xx()) {
-+		int id = dss_get_ctx_id();
-+
-+		if (id != dss.ctx_id) {
-+			DSSDBG("ctx id %u -> id %u\n",
-+					dss.ctx_id, id);
-+			restore_all_ctx();
-+			dss.ctx_id = id;
-+		}
-+	}
-+}
-+
-+static void dss_clk_disable_no_ctx(enum dss_clock clks)
-+{
-+	unsigned num_clks = count_clk_bits(clks);
-+
-+	if (clks & DSS_CLK_ICK)
-+		clk_disable(dss.dss_ick);
-+	if (clks & DSS_CLK_FCK1)
-+		clk_disable(dss.dss1_fck);
-+	if (clks & DSS_CLK_FCK2)
-+		clk_disable(dss.dss2_fck);
-+	if (clks & DSS_CLK_54M)
-+		clk_disable(dss.dss_54m_fck);
-+	if (clks & DSS_CLK_96M)
-+		clk_disable(dss.dss_96m_fck);
-+
-+	dss.num_clks_enabled -= num_clks;
-+}
-+
-+void dss_clk_disable(enum dss_clock clks)
-+{
-+	if (cpu_is_omap34xx()) {
-+		unsigned num_clks = count_clk_bits(clks);
-+
-+		BUG_ON(dss.num_clks_enabled < num_clks);
-+
-+		if (dss.num_clks_enabled == num_clks)
-+			save_all_ctx();
-+	}
++	dispc_pck_free_enable(0);
 +
-+	dss_clk_disable_no_ctx(clks);
++	/* Reset SDI PLL */
++	REG_FLD_MOD(DSS_PLL_CONTROL, 0, 18, 18); /* SDI_PLL_SYSRESET */
 +}
 +
-+static void dss_clk_enable_all_no_ctx(void)
++void dss_dump_regs(struct seq_file *s)
 +{
-+	enum dss_clock clks;
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dss_read_reg(r))
 +
-+	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
-+	if (cpu_is_omap34xx())
-+		clks |= DSS_CLK_96M;
-+	dss_clk_enable_no_ctx(clks);
-+}
-+
-+static void dss_clk_disable_all_no_ctx(void)
-+{
-+	enum dss_clock clks;
-+
-+	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
-+	if (cpu_is_omap34xx())
-+		clks |= DSS_CLK_96M;
-+	dss_clk_disable_no_ctx(clks);
-+}
++	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +
-+static void dss_clk_disable_all(void)
-+{
-+	enum dss_clock clks;
++	DUMPREG(DSS_REVISION);
++	DUMPREG(DSS_SYSCONFIG);
++	DUMPREG(DSS_SYSSTATUS);
++	DUMPREG(DSS_IRQSTATUS);
++	DUMPREG(DSS_CONTROL);
++	DUMPREG(DSS_SDI_CONTROL);
++	DUMPREG(DSS_PLL_CONTROL);
++	DUMPREG(DSS_SDI_STATUS);
 +
-+	clks = DSS_CLK_ICK | DSS_CLK_FCK1 | DSS_CLK_FCK2 | DSS_CLK_54M;
-+	if (cpu_is_omap34xx())
-+		clks |= DSS_CLK_96M;
-+	dss_clk_disable(clks);
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
 +}
 +
-+void dss_select_clk_source(int dsi, int dispc)
++void dss_select_clk_source(bool dsi, bool dispc)
 +{
 +	u32 r;
 +	r = dss_read_reg(DSS_CONTROL);
@@ -7390,12 +10690,12 @@ index 0000000..4a403c1
 +	REG_FLD_MOD(DSS_CONTROL, l, 6, 6);
 +}
 +
-+void dss_set_dac_pwrdn_bgz(int enable)
++void dss_set_dac_pwrdn_bgz(bool enable)
 +{
 +	REG_FLD_MOD(DSS_CONTROL, enable, 5, 5);	/* DAC Power-Down Control */
 +}
 +
-+int dss_init(void)
++int dss_init(bool skip_init)
 +{
 +	int r;
 +	u32 rev;
@@ -7407,14 +10707,20 @@ index 0000000..4a403c1
 +		goto fail0;
 +	}
 +
-+	/* We need to wait here a bit, otherwise we sometimes start to get
-+	 * synclost errors. I believe we could wait for one framedone or
-+	 * perhaps vsync interrupt, but, because dispc is not initialized yet,
-+	 * we don't have access to the irq register.
-+	 */
-+	msleep(400);
++	if (!skip_init) {
++		/* We need to wait here a bit, otherwise we sometimes start to
++		 * get synclost errors, and after that only power cycle will
++		 * restore DSS functionality. I have no idea why this happens.
++		 * And we have to wait _before_ resetting the DSS, but after
++		 * enabling clocks.
++		 */
++		msleep(50);
++
++		_omap_dss_reset();
 +
-+	_omap_dss_reset();
++	}
++	else
++		printk("DSS SKIP RESET\n");
 +
 +	/* autoidle */
 +	REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
@@ -7455,203 +10761,21 @@ index 0000000..4a403c1
 +
 +void dss_exit(void)
 +{
-+	int c;
-+
 +	free_irq(INT_24XX_DSS_IRQ, NULL);
 +
-+	/* these should be removed at some point */
-+	c = clk_get_usecount(dss.dss_ick);
-+	if (c > 0) {
-+		DSSERR("warning: dss_ick usecount %d, disabling\n", c);
-+		while (c-- > 0)
-+			clk_disable(dss.dss_ick);
-+	}
-+
-+	c = clk_get_usecount(dss.dss1_fck);
-+	if (c > 0) {
-+		DSSERR("warning: dss1_fck usecount %d, disabling\n", c);
-+		while (c-- > 0)
-+			clk_disable(dss.dss1_fck);
-+	}
-+
-+	c = clk_get_usecount(dss.dss2_fck);
-+	if (c > 0) {
-+		DSSERR("warning: dss2_fck usecount %d, disabling\n", c);
-+		while (c-- > 0)
-+			clk_disable(dss.dss2_fck);
-+	}
-+
-+	c = clk_get_usecount(dss.dss_54m_fck);
-+	if (c > 0) {
-+		DSSERR("warning: dss_54m_fck usecount %d, disabling\n", c);
-+		while (c-- > 0)
-+			clk_disable(dss.dss_54m_fck);
-+	}
-+
-+	if (dss.dss_96m_fck) {
-+		c = clk_get_usecount(dss.dss_96m_fck);
-+		if (c > 0) {
-+			DSSERR("warning: dss_96m_fck usecount %d, disabling\n",
-+					c);
-+			while (c-- > 0)
-+				clk_disable(dss.dss_96m_fck);
-+		}
-+	}
-+
-+	put_dss_clocks();
-+
 +	iounmap(dss.base);
 +}
 +
-+
-+
-+static int omap_dss_probe(struct platform_device *pdev)
-+{
-+	struct omap_dss_platform_data *pdata = pdev->dev.platform_data;
-+
-+	int r;
-+
-+	dss.pdev = pdev;
-+
-+	r = get_dss_clocks();
-+	if (r)
-+		goto fail0;
-+
-+	dss_clk_enable_all_no_ctx();
-+
-+	dss.ctx_id = dss_get_ctx_id();
-+	DSSDBG("initial ctx id %u\n", dss.ctx_id);
-+
-+	r = dss_init();
-+	if (r) {
-+		DSSERR("Failed to initialize DSS\n");
-+		goto fail0;
-+	}
-+
-+#ifdef CONFIG_OMAP2_DSS_RFBI
-+	r = rfbi_init();
-+	if (r) {
-+		DSSERR("Failed to initialize rfbi\n");
-+		goto fail0;
-+	}
-+#endif
-+
-+	r = dpi_init();
-+	if (r) {
-+		DSSERR("Failed to initialize dpi\n");
-+		goto fail0;
-+	}
-+
-+	r = dispc_init();
-+	if (r) {
-+		DSSERR("Failed to initialize dispc\n");
-+		goto fail0;
-+	}
-+#ifdef CONFIG_OMAP2_DSS_VENC
-+	r = venc_init();
-+	if (r) {
-+		DSSERR("Failed to initialize venc\n");
-+		goto fail0;
-+	}
-+#endif
-+	if (cpu_is_omap34xx()) {
-+#ifdef CONFIG_OMAP2_DSS_SDI
-+		r = sdi_init();
-+		if (r) {
-+			DSSERR("Failed to initialize SDI\n");
-+			goto fail0;
-+		}
-+#endif
-+#ifdef CONFIG_OMAP2_DSS_DSI
-+		r = dsi_init();
-+		if (r) {
-+			DSSERR("Failed to initialize DSI\n");
-+			goto fail0;
-+		}
-+#endif
-+	}
-+
-+	initialize_displays(pdata);
-+
-+	r = initialize_sysfs(&pdev->dev);
-+	if (r)
-+		goto fail0;
-+
-+	initialize_overlays(def_disp_name);
-+
-+	dss_clk_disable_all();
-+
-+	return 0;
-+
-+	/* XXX fail correctly */
-+fail0:
-+	return r;
-+}
-+
-+static int omap_dss_remove(struct platform_device *pdev)
-+{
-+	uninitialize_sysfs(&pdev->dev);
-+
-+#ifdef CONFIG_OMAP2_DSS_VENC
-+	venc_exit();
-+#endif
-+	dispc_exit();
-+	dpi_exit();
-+#ifdef CONFIG_OMAP2_DSS_RFBI
-+	rfbi_exit();
-+#endif
-+	if (cpu_is_omap34xx()) {
-+#ifdef CONFIG_OMAP2_DSS_DSI
-+		dsi_exit();
-+#endif
-+#ifdef CONFIG_OMAP2_DSS_SDI
-+		sdi_exit();
-+#endif
-+	}
-+
-+	dss_exit();
-+
-+	return 0;
-+}
-+
-+
-+static struct platform_driver omap_dss_driver = {
-+	.probe          = omap_dss_probe,
-+	.remove         = omap_dss_remove,
-+	.driver         = {
-+		.name   = "omap-dss",
-+		.owner  = THIS_MODULE,
-+	},
-+};
-+
-+static int __init omap_dss_init(void)
-+{
-+	return platform_driver_register(&omap_dss_driver);
-+}
-+
-+static void __exit omap_dss_exit(void)
-+{
-+	platform_driver_unregister(&omap_dss_driver);
-+}
-+
-+subsys_initcall(omap_dss_init);
-+module_exit(omap_dss_exit);
-+
-+
-+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
-+MODULE_DESCRIPTION("OMAP2/3 Display Subsystem");
-+MODULE_LICENSE("GPL v2");
-+
-diff --git a/arch/arm/plat-omap/dss/dss.h b/arch/arm/plat-omap/dss/dss.h
+diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
 new file mode 100644
-index 0000000..da628a7
+index 0000000..bac5ece
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/dss.h
-@@ -0,0 +1,274 @@
++++ b/drivers/video/omap2/dss/dss.h
+@@ -0,0 +1,331 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/dss.h
++ * linux/drivers/video/omap2/dss/dss.h
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * Some code and ideas taken from drivers/video/omap/ driver
@@ -7682,42 +10806,61 @@ index 0000000..da628a7
 +#ifdef DSS_SUBSYS_NAME
 +#define DSSDBG(format, ...) \
 +	if (dss_debug) \
-+		printk(KERN_DEBUG "omap-dss " DSS_SUBSYS_NAME ": " format, \
++		printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME ": " format, \
 +		## __VA_ARGS__)
 +#else
 +#define DSSDBG(format, ...) \
 +	if (dss_debug) \
-+		printk(KERN_DEBUG "omap-dss: " format, ## __VA_ARGS__)
++		printk(KERN_DEBUG "omapdss: " format, ## __VA_ARGS__)
 +#endif
++
++#ifdef DSS_SUBSYS_NAME
++#define DSSDBGF(format, ...) \
++	if (dss_debug) \
++		printk(KERN_DEBUG "omapdss " DSS_SUBSYS_NAME \
++				": %s(" format ")\n", \
++				__func__, \
++				## __VA_ARGS__)
 +#else
++#define DSSDBGF(format, ...) \
++	if (dss_debug) \
++		printk(KERN_DEBUG "omapdss: " \
++				": %s(" format ")\n", \
++				__func__, \
++				## __VA_ARGS__)
++#endif
++
++#else /* DEBUG */
 +#define DSSDBG(format, ...)
++#define DSSDBGF(format, ...)
 +#endif
 +
++
 +#ifdef DSS_SUBSYS_NAME
 +#define DSSERR(format, ...) \
-+	printk(KERN_ERR "omap-dss " DSS_SUBSYS_NAME " error: " format, \
++	printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \
 +	## __VA_ARGS__)
 +#else
 +#define DSSERR(format, ...) \
-+	printk(KERN_ERR "omap-dss error: " format, ## __VA_ARGS__)
++	printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__)
 +#endif
 +
 +#ifdef DSS_SUBSYS_NAME
 +#define DSSINFO(format, ...) \
-+	printk(KERN_INFO "omap-dss " DSS_SUBSYS_NAME ": " format, \
++	printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \
 +	## __VA_ARGS__)
 +#else
 +#define DSSINFO(format, ...) \
-+	printk(KERN_INFO "omap-dss: " format, ## __VA_ARGS__)
++	printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__)
 +#endif
 +
 +#ifdef DSS_SUBSYS_NAME
 +#define DSSWARN(format, ...) \
-+	printk(KERN_WARNING "omap-dss " DSS_SUBSYS_NAME ": " format, \
++	printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \
 +	## __VA_ARGS__)
 +#else
 +#define DSSWARN(format, ...) \
-+	printk(KERN_WARNING "omap-dss: " format, ## __VA_ARGS__)
++	printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__)
 +#endif
 +
 +/* OMAP TRM gives bitfields as start:end, where start is the higher bit
@@ -7757,65 +10900,95 @@ index 0000000..da628a7
 +	unsigned long pck;
 +
 +	/* dividers */
-+	int fck_div;
-+	int lck_div;
-+	int pck_div;
++	u16 fck_div;
++	u16 lck_div;
++	u16 pck_div;
 +};
 +
 +struct dsi_clock_info {
 +	/* rates that we get with dividers below */
 +	unsigned long fint;
 +	unsigned long dsiphy;
-+	unsigned long clkin;	/* input clk for DSI PLL */
-+	unsigned long dispc_fck;	/* output clk, DSI1_PLL_FCLK */
-+	unsigned long dsi_fck;	/* output clk, DSI2_PLL_FCLK */
++	unsigned long clkin;
++	unsigned long dsi1_pll_fclk;
++	unsigned long dsi2_pll_fclk;
 +	unsigned long lck;
 +	unsigned long pck;
 +
 +	/* dividers */
-+	int regn;
-+	int regm;
-+	int regm3;
-+	int regm4;
++	u16 regn;
++	u16 regm;
++	u16 regm3;
++	u16 regm4;
 +
-+	int lck_div;
-+	int pck_div;
++	u16 lck_div;
++	u16 pck_div;
 +
-+	int highfreq;
-+	int use_dss2_fck;
++	u8 highfreq;
++	bool use_dss2_fck;
 +};
 +
-+int initialize_sysfs(struct device *dev);
-+void uninitialize_sysfs(struct device *dev);
-+void initialize_displays(struct omap_dss_platform_data *pdata);
-+void initialize_overlays(const char *def_disp_name);
++struct seq_file;
++struct platform_device;
++
++/* core */
++void dss_clk_enable(enum dss_clock clks);
++void dss_clk_disable(enum dss_clock clks);
++unsigned long dss_clk_get_rate(enum dss_clock clk);
++int dss_need_ctx_restore(void);
++void dss_dump_clocks(struct seq_file *s);
++
++int dss_dsi_power_up(void);
++void dss_dsi_power_down(void);
++
++/* display */
++void dss_init_displays(struct platform_device *pdev);
++void dss_uninit_displays(struct platform_device *pdev);
++int dss_suspend_all_displays(void);
++int dss_resume_all_displays(void);
++struct omap_display *dss_get_display(int no);
++
++/* manager */
++int dss_init_overlay_managers(struct platform_device *pdev);
++void dss_uninit_overlay_managers(struct platform_device *pdev);
++
++/* overlay */
++void dss_init_overlays(struct platform_device *pdev, const char *def_disp_name);
++void dss_uninit_overlays(struct platform_device *pdev);
++int dss_check_overlay(struct omap_overlay *ovl, struct omap_display *display);
++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr);
 +
 +/* DSS */
-+int dss_init(void);
++int dss_init(bool skip_init);
 +void dss_exit(void);
 +
-+void dss_clk_enable(enum dss_clock clks);
-+void dss_clk_disable(enum dss_clock clks);
++void dss_save_context(void);
++void dss_restore_context(void);
++
++void dss_dump_regs(struct seq_file *s);
 +
-+void dss_sdi_init(int datapairs);
-+void dss_select_clk_source(int dsi, int dispc);
++void dss_sdi_init(u8 datapairs);
++void dss_sdi_enable(void);
++void dss_sdi_disable(void);
++
++void dss_select_clk_source(bool dsi, bool dispc);
 +int dss_get_dsi_clk_source(void);
 +int dss_get_dispc_clk_source(void);
 +void dss_set_venc_output(enum omap_dss_venc_type type);
-+void dss_set_dac_pwrdn_bgz(int enable);
-+unsigned long dss_clk_get_rate(enum dss_clock clk);
-+ssize_t dss_print_clocks(char *buf, ssize_t size);
++void dss_set_dac_pwrdn_bgz(bool enable);
 +
 +/* SDI */
-+int sdi_init(void);
++int sdi_init(bool skip_init);
 +void sdi_exit(void);
 +void sdi_init_display(struct omap_display *display);
 +
-+
 +/* DSI */
 +int dsi_init(void);
 +void dsi_exit(void);
 +
++void dsi_dump_clocks(struct seq_file *s);
++void dsi_dump_regs(struct seq_file *s);
++
 +void dsi_save_context(void);
 +void dsi_restore_context(void);
 +
@@ -7823,12 +10996,11 @@ index 0000000..da628a7
 +void dsi_irq_handler(void);
 +unsigned long dsi_get_dsi1_pll_rate(void);
 +unsigned long dsi_get_dsi2_pll_rate(void);
-+int dsi_pll_calc_pck(int is_tft, unsigned long req_pck,
++int dsi_pll_calc_pck(bool is_tft, unsigned long req_pck,
 +		struct dsi_clock_info *cinfo);
 +int dsi_pll_program(struct dsi_clock_info *cinfo);
-+int dsi_pll_init(int enable_hsclk, int enable_hsdiv);
++int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv);
 +void dsi_pll_uninit(void);
-+ssize_t dsi_print_clocks(char *buf, ssize_t size);
 +
 +/* DPI */
 +int dpi_init(void);
@@ -7838,100 +11010,1284 @@ index 0000000..da628a7
 +/* DISPC */
 +int dispc_init(void);
 +void dispc_exit(void);
++void dispc_dump_clocks(struct seq_file *s);
++void dispc_dump_regs(struct seq_file *s);
 +void dispc_irq_handler(void);
 +void dispc_fake_vsync_irq(void);
 +
 +void dispc_save_context(void);
 +void dispc_restore_context(void);
 +
-+void dispc_lcd_enable_signal_polarity(int act_high);
-+void dispc_lcd_enable_signal(int enable);
-+void dispc_pck_free_enable(int enable);
-+void dispc_enable_fifohandcheck(int enable);
++void dispc_lcd_enable_signal_polarity(bool act_high);
++void dispc_lcd_enable_signal(bool enable);
++void dispc_pck_free_enable(bool enable);
++void dispc_enable_fifohandcheck(bool enable);
 +
-+void dispc_set_lcd_size(int width, int height);
-+void dispc_set_digit_size(int width, int height);
++void dispc_set_lcd_size(u16 width, u16 height);
++void dispc_set_digit_size(u16 width, u16 height);
 +u32 dispc_get_plane_fifo_size(enum omap_plane plane);
 +void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high);
++void dispc_enable_fifomerge(bool enable);
 +void dispc_set_burst_size(enum omap_plane plane,
 +		enum omap_burst_size burst_size);
 +
 +void dispc_set_plane_ba0(enum omap_plane plane, u32 paddr);
 +void dispc_set_plane_ba1(enum omap_plane plane, u32 paddr);
-+void dispc_set_plane_pos(enum omap_plane plane, int x, int y);
-+void dispc_set_plane_size(enum omap_plane plane, int width, int height);
-+void dispc_set_row_inc(enum omap_plane plane, int inc);
++void dispc_set_plane_pos(enum omap_plane plane, u16 x, u16 y);
++void dispc_set_plane_size(enum omap_plane plane, u16 width, u16 height);
 +
 +int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out,
-+		      u32 paddr, int screen_width,
-+		      int pos_x, int pos_y,
-+		      int width, int height,
-+		      int out_width, int out_height,
++		      u32 paddr, u16 screen_width,
++		      u16 pos_x, u16 pos_y,
++		      u16 width, u16 height,
++		      u16 out_width, u16 out_height,
 +		      enum omap_color_mode color_mode,
-+		      int ilace);
++		      bool ilace,
++		      u8 rotation, bool mirror);
 +
 +void dispc_go(enum omap_channel channel);
-+void dispc_enable_lcd_out(int enable);
-+void dispc_enable_digit_out(int enable);
-+int dispc_enable_plane(enum omap_plane plane, int enable);
++void dispc_enable_lcd_out(bool enable);
++void dispc_enable_digit_out(bool enable);
++int dispc_enable_plane(enum omap_plane plane, bool enable);
 +
 +void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode);
-+void dispc_set_tft_data_lines(int data_lines);
++void dispc_set_tft_data_lines(u8 data_lines);
 +void dispc_set_lcd_display_type(enum omap_lcd_display_type type);
 +void dispc_set_loadmode(enum omap_dss_load_mode mode);
 +
 +void dispc_set_default_color(enum omap_channel channel, u32 color);
++u32 dispc_get_default_color(enum omap_channel channel);
 +void dispc_set_trans_key(enum omap_channel ch,
 +		enum omap_dss_color_key_type type,
 +		u32 trans_key);
-+void dispc_enable_trans_key(enum omap_channel ch, int enable);
++void dispc_get_trans_key(enum omap_channel ch,
++		enum omap_dss_color_key_type *type,
++		u32 *trans_key);
++void dispc_enable_trans_key(enum omap_channel ch, bool enable);
++bool dispc_trans_key_enabled(enum omap_channel ch);
 +
 +void dispc_set_lcd_timings(struct omap_video_timings *timings);
 +unsigned long dispc_fclk_rate(void);
 +unsigned long dispc_pclk_rate(void);
 +void dispc_set_pol_freq(struct omap_panel *panel);
-+void find_lck_pck_divs(int is_tft, unsigned long req_pck, unsigned long fck,
-+		int *lck_div, int *pck_div);
-+int dispc_calc_clock_div(int is_tft, unsigned long req_pck,
++void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
++		u16 *lck_div, u16 *pck_div);
++int dispc_calc_clock_div(bool is_tft, unsigned long req_pck,
 +		struct dispc_clock_info *cinfo);
 +int dispc_set_clock_div(struct dispc_clock_info *cinfo);
-+void dispc_set_lcd_divisor(int lck_div, int pck_div);
++int dispc_get_clock_div(struct dispc_clock_info *cinfo);
++void dispc_set_lcd_divisor(u16 lck_div, u16 pck_div);
 +
 +void dispc_setup_partial_planes(struct omap_display *display,
-+				int *x, int *y, int *w, int *h);
++				u16 *x, u16 *y, u16 *w, u16 *h);
 +void dispc_draw_partial_planes(struct omap_display *display);
 +
 +
-+ssize_t dispc_print_clocks(char *buf, ssize_t size);
-+
 +/* VENC */
 +int venc_init(void);
 +void venc_exit(void);
++void venc_dump_regs(struct seq_file *s);
 +void venc_init_display(struct omap_display *display);
 +
 +/* RFBI */
 +int rfbi_init(void);
 +void rfbi_exit(void);
++void rfbi_dump_regs(struct seq_file *s);
 +
 +int rfbi_configure(int rfbi_module, int bpp, int lines);
-+void rfbi_enable_rfbi(int enable);
-+void rfbi_transfer_area(int width, int height,
++void rfbi_enable_rfbi(bool enable);
++void rfbi_transfer_area(u16 width, u16 height,
 +			     void (callback)(void *data), void *data);
 +void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
 +unsigned long rfbi_get_max_tx_rate(void);
 +void rfbi_init_display(struct omap_display *display);
 +
 +#endif
-diff --git a/arch/arm/plat-omap/dss/rfbi.c b/arch/arm/plat-omap/dss/rfbi.c
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
 new file mode 100644
-index 0000000..b4b65e6
+index 0000000..b0fee80
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/rfbi.c
-@@ -0,0 +1,1262 @@
++++ b/drivers/video/omap2/dss/manager.c
+@@ -0,0 +1,576 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/rfbi.c
++ * linux/drivers/video/omap2/dss/manager.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "MANAGER"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <mach/display.h>
++
++#include "dss.h"
++
++static int num_managers;
++static struct list_head manager_list;
++
++static ssize_t manager_name_show(struct omap_overlay_manager *mgr, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%s\n", mgr->name);
++}
++
++static ssize_t manager_display_show(struct omap_overlay_manager *mgr, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%s\n",
++			mgr->display ? mgr->display->name : "<none>");
++}
++
++static ssize_t manager_display_store(struct omap_overlay_manager *mgr, const char *buf, size_t size)
++{
++	int r, i;
++	int len = size;
++	struct omap_display *display = NULL;
++
++	if (buf[size-1] == '\n')
++		--len;
++
++	if (len > 0) {
++		for (i = 0; i < omap_dss_get_num_displays(); ++i) {
++			display = dss_get_display(i);
++
++			if (strncmp(buf, display->name, len) == 0)
++				break;
++
++			display = NULL;
++		}
++	}
++
++	if (len > 0 && display == NULL)
++		return -EINVAL;
++
++	if (display)
++		DSSDBG("display %s found\n", display->name);
++
++	if (mgr->display) {
++		r = mgr->unset_display(mgr);
++		if (r) {
++			DSSERR("failed to unset display\n");
++			return r;
++		}
++	}
++
++	if (display) {
++		r = mgr->set_display(mgr, display);
++		if (r) {
++			DSSERR("failed to set manager\n");
++			return r;
++		}
++
++		r = mgr->apply(mgr);
++		if (r) {
++			DSSERR("failed to apply dispc config\n");
++			return r;
++		}
++	}
++
++	return size;
++}
++
++static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
++					  char *buf)
++{
++	u32 default_color;
++
++	default_color = dispc_get_default_color(mgr->id);
++	return snprintf(buf, PAGE_SIZE, "%d", default_color);
++}
++
++static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
++					   const char *buf, size_t size)
++{
++	u32 default_color;
++
++	if (sscanf(buf, "%d", &default_color) != 1)
++		return -EINVAL;
++	dispc_set_default_color(mgr->id, default_color);
++
++	return size;
++}
++
++static const char *color_key_type_str[] = {
++	"gfx-destination",
++	"video-source",
++};
++
++static ssize_t manager_color_key_type_show(struct omap_overlay_manager *mgr,
++					   char *buf)
++{
++	enum omap_dss_color_key_type key_type;
++
++	dispc_get_trans_key(mgr->id, &key_type, NULL);
++	BUG_ON(key_type >= ARRAY_SIZE(color_key_type_str));
++
++	return snprintf(buf, PAGE_SIZE, "%s\n", color_key_type_str[key_type]);
++}
++
++static ssize_t manager_color_key_type_store(struct omap_overlay_manager *mgr,
++					    const char *buf, size_t size)
++{
++	enum omap_dss_color_key_type key_type;
++	u32 key_value;
++
++	for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
++	     key_type < ARRAY_SIZE(color_key_type_str); key_type++) {
++		if (sysfs_streq(buf, color_key_type_str[key_type]))
++			break;
++	}
++	if (key_type == ARRAY_SIZE(color_key_type_str))
++		return -EINVAL;
++	dispc_get_trans_key(mgr->id, NULL, &key_value);
++	dispc_set_trans_key(mgr->id, key_type, key_value);
++
++	return size;
++}
++
++static ssize_t manager_color_key_value_show(struct omap_overlay_manager *mgr,
++					    char *buf)
++{
++	u32 key_value;
++
++	dispc_get_trans_key(mgr->id, NULL, &key_value);
++
++	return snprintf(buf, PAGE_SIZE, "%d\n", key_value);
++}
++
++static ssize_t manager_color_key_value_store(struct omap_overlay_manager *mgr,
++					     const char *buf, size_t size)
++{
++	enum omap_dss_color_key_type key_type;
++	u32 key_value;
++
++	if (sscanf(buf, "%d", &key_value) != 1)
++		return -EINVAL;
++	dispc_get_trans_key(mgr->id, &key_type, NULL);
++	dispc_set_trans_key(mgr->id, key_type, key_value);
++
++	return size;
++}
++
++static ssize_t manager_color_key_enabled_show(struct omap_overlay_manager *mgr,
++					      char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d\n",
++			dispc_trans_key_enabled(mgr->id));
++}
++
++static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr,
++					       const char *buf, size_t size)
++{
++	int enable;
++
++	if (sscanf(buf, "%d", &enable) != 1)
++		return -EINVAL;
++
++	dispc_enable_trans_key(mgr->id, enable);
++
++	return size;
++}
++
++
++struct manager_attribute {
++	struct attribute attr;
++	ssize_t (*show)(struct omap_overlay_manager *, char *);
++	ssize_t	(*store)(struct omap_overlay_manager *, const char *, size_t);
++};
++
++#define MANAGER_ATTR(_name, _mode, _show, _store) \
++	struct manager_attribute manager_attr_##_name = \
++	__ATTR(_name, _mode, _show, _store)
++
++static MANAGER_ATTR(name, S_IRUGO, manager_name_show, NULL);
++static MANAGER_ATTR(display, S_IRUGO|S_IWUSR,
++		manager_display_show, manager_display_store);
++static MANAGER_ATTR(default_color, S_IRUGO|S_IWUSR,
++		manager_default_color_show, manager_default_color_store);
++static MANAGER_ATTR(color_key_type, S_IRUGO|S_IWUSR,
++		manager_color_key_type_show, manager_color_key_type_store);
++static MANAGER_ATTR(color_key_value, S_IRUGO|S_IWUSR,
++		manager_color_key_value_show, manager_color_key_value_store);
++static MANAGER_ATTR(color_key_enabled, S_IRUGO|S_IWUSR,
++		manager_color_key_enabled_show, manager_color_key_enabled_store);
++
++static struct attribute *manager_sysfs_attrs[] = {
++	&manager_attr_name.attr,
++	&manager_attr_display.attr,
++	&manager_attr_default_color.attr,
++	&manager_attr_color_key_type.attr,
++	&manager_attr_color_key_value.attr,
++	&manager_attr_color_key_enabled.attr,
++	NULL
++};
++
++static ssize_t manager_attr_show(struct kobject *kobj, struct attribute *attr, char *buf)
++{
++	struct omap_overlay_manager *manager;
++	struct manager_attribute *manager_attr;
++
++	manager = container_of(kobj, struct omap_overlay_manager, kobj);
++	manager_attr = container_of(attr, struct manager_attribute, attr);
++
++	if (!manager_attr->show)
++		return -ENOENT;
++
++	return manager_attr->show(manager, buf);
++}
++
++static ssize_t manager_attr_store(struct kobject *kobj, struct attribute *attr,
++		const char *buf, size_t size)
++{
++	struct omap_overlay_manager *manager;
++	struct manager_attribute *manager_attr;
++
++	manager = container_of(kobj, struct omap_overlay_manager, kobj);
++	manager_attr = container_of(attr, struct manager_attribute, attr);
++
++	if (!manager_attr->store)
++		return -ENOENT;
++
++	return manager_attr->store(manager, buf, size);
++}
++
++static struct sysfs_ops manager_sysfs_ops = {
++	.show = manager_attr_show,
++	.store = manager_attr_store,
++};
++
++static struct kobj_type manager_ktype = {
++	.sysfs_ops = &manager_sysfs_ops,
++	.default_attrs = manager_sysfs_attrs,
++};
++
++static int omap_dss_set_display(struct omap_overlay_manager *mgr,
++		struct omap_display *display)
++{
++	int i;
++	int r;
++
++	if (display->manager) {
++		DSSERR("display '%s' already has a manager '%s'\n",
++			       display->name, display->manager->name);
++		return -EINVAL;
++	}
++
++	if ((mgr->supported_displays & display->type) == 0) {
++		DSSERR("display '%s' does not support manager '%s'\n",
++			       display->name, mgr->name);
++		return -EINVAL;
++	}
++
++	for (i = 0; i < mgr->num_overlays; i++) {
++		struct omap_overlay *ovl = mgr->overlays[i];
++
++		if (ovl->manager != mgr || !ovl->info.enabled)
++			continue;
++
++		r = dss_check_overlay(ovl, display);
++		if (r)
++			return r;
++	}
++
++	display->manager = mgr;
++	mgr->display = display;
++
++	return 0;
++}
++
++static int omap_dss_unset_display(struct omap_overlay_manager *mgr)
++{
++	if (!mgr->display) {
++		DSSERR("failed to unset display, display not set.\n");
++		return -EINVAL;
++	}
++
++	mgr->display->manager = NULL;
++	mgr->display = NULL;
++
++	return 0;
++}
++
++
++static int overlay_enabled(struct omap_overlay *ovl)
++{
++	return ovl->info.enabled && ovl->manager && ovl->manager->display;
++}
++
++/* We apply settings to both managers here so that we can use optimizations
++ * like fifomerge. Shadow registers can be changed first and the non-shadowed
++ * should be changed last, at the same time with GO */
++static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
++{
++	int i;
++	int ret = 0;
++	enum omap_dss_update_mode mode;
++	struct omap_display *display;
++	struct omap_overlay *ovl;
++	bool ilace = 0;
++	int outw, outh;
++	int r;
++	int num_planes_enabled = 0;
++
++	DSSDBG("omap_dss_mgr_apply(%s)\n", mgr->name);
++
++	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	/* Configure normal overlay parameters and disable unused overlays */
++	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++		ovl = omap_dss_get_overlay(i);
++
++		if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++			continue;
++
++		if (!overlay_enabled(ovl)) {
++			dispc_enable_plane(ovl->id, 0);
++			continue;
++		}
++
++		display = ovl->manager->display;
++
++		if (dss_check_overlay(ovl, display)) {
++			dispc_enable_plane(ovl->id, 0);
++			continue;
++		}
++
++		++num_planes_enabled;
++
++		/* On a manual update display, in manual update mode, update()
++		 * handles configuring planes */
++		mode = OMAP_DSS_UPDATE_AUTO;
++		if (display->get_update_mode)
++			mode = display->get_update_mode(mgr->display);
++
++		if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE &&
++				mode != OMAP_DSS_UPDATE_AUTO)
++			continue;
++
++		if (display->type == OMAP_DISPLAY_TYPE_VENC)
++			ilace = 1;
++
++		if (ovl->info.out_width == 0)
++			outw = ovl->info.width;
++		else
++			outw = ovl->info.out_width;
++
++		if (ovl->info.out_height == 0)
++			outh = ovl->info.height;
++		else
++			outh = ovl->info.out_height;
++
++		r = dispc_setup_plane(ovl->id, ovl->manager->id,
++				ovl->info.paddr,
++				ovl->info.screen_width,
++				ovl->info.pos_x,
++				ovl->info.pos_y,
++				ovl->info.width,
++				ovl->info.height,
++				outw,
++				outh,
++				ovl->info.color_mode,
++				ilace,
++				ovl->info.rotation,
++				ovl->info.mirror);
++
++		if (r) {
++			DSSERR("dispc_setup_plane failed for ovl %d\n",
++					ovl->id);
++			dispc_enable_plane(ovl->id, 0);
++			continue;
++		}
++
++		dispc_enable_plane(ovl->id, 1);
++	}
++
++	/* Enable fifo merge if possible */
++	dispc_enable_fifomerge(num_planes_enabled == 1);
++
++	/* Go through overlays again. This time we configure fifos.  We have to
++	 * do this after enabling/disabling fifomerge so that we have correct
++	 * knowledge of fifo sizes */
++	for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++		ovl = omap_dss_get_overlay(i);
++
++		if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++			continue;
++
++		if (!overlay_enabled(ovl)) {
++			continue;
++		}
++
++		ovl->manager->display->configure_overlay(ovl);
++	}
++
++	/* Issue GO for managers */
++	list_for_each_entry(mgr, &manager_list, list) {
++		if (!(mgr->caps & OMAP_DSS_OVL_MGR_CAP_DISPC))
++			continue;
++
++		display = mgr->display;
++
++		if (!display)
++			continue;
++
++		/* We don't need GO with manual update display. LCD iface will
++		 * always be turned off after frame, and new settings will
++		 * be taken in to use at next update */
++		if (display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE)
++			continue;
++
++		dispc_go(mgr->id);
++	}
++
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	return ret;
++}
++
++static void omap_dss_mgr_set_def_color(struct omap_overlay_manager *mgr,
++		u32 color)
++{
++	dispc_set_default_color(mgr->id, color);
++}
++
++static void omap_dss_mgr_set_trans_key(struct omap_overlay_manager *mgr,
++		enum omap_dss_color_key_type type,
++		u32 trans_key)
++{
++	dispc_set_trans_key(mgr->id, type, trans_key);
++}
++
++static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr,
++		bool enable)
++{
++	dispc_enable_trans_key(mgr->id, enable);
++}
++
++static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
++{
++	++num_managers;
++	list_add_tail(&manager->list, &manager_list);
++}
++
++int dss_init_overlay_managers(struct platform_device *pdev)
++{
++	int i, r;
++
++	INIT_LIST_HEAD(&manager_list);
++
++	num_managers = 0;
++
++	for (i = 0; i < 2; ++i) {
++		struct omap_overlay_manager *mgr;
++		mgr = kzalloc(sizeof(*mgr), GFP_KERNEL);
++
++		BUG_ON(mgr == NULL);
++
++		switch (i) {
++		case 0:
++			mgr->name = "lcd";
++			mgr->id = OMAP_DSS_CHANNEL_LCD;
++			mgr->supported_displays =
++				OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
++				OMAP_DISPLAY_TYPE_SDI | OMAP_DISPLAY_TYPE_DSI;
++			break;
++		case 1:
++			mgr->name = "tv";
++			mgr->id = OMAP_DSS_CHANNEL_DIGIT;
++			mgr->supported_displays = OMAP_DISPLAY_TYPE_VENC;
++			break;
++		}
++
++		mgr->set_display = &omap_dss_set_display,
++		mgr->unset_display = &omap_dss_unset_display,
++		mgr->apply = &omap_dss_mgr_apply,
++		mgr->set_default_color = &omap_dss_mgr_set_def_color,
++		mgr->set_trans_key = &omap_dss_mgr_set_trans_key,
++		mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key,
++		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC,
++
++		dss_overlay_setup_dispc_manager(mgr);
++
++		omap_dss_add_overlay_manager(mgr);
++
++		r = kobject_init_and_add(&mgr->kobj, &manager_ktype,
++				&pdev->dev.kobj, "manager%d", i);
++
++		if (r) {
++			DSSERR("failed to create sysfs file\n");
++			continue;
++		}
++	}
++
++	return 0;
++}
++
++void dss_uninit_overlay_managers(struct platform_device *pdev)
++{
++	struct omap_overlay_manager *mgr;
++
++	while (!list_empty(&manager_list)) {
++		mgr = list_first_entry(&manager_list,
++				struct omap_overlay_manager, list);
++		list_del(&mgr->list);
++		kobject_del(&mgr->kobj);
++		kobject_put(&mgr->kobj);
++		kfree(mgr);
++	}
++
++	num_managers = 0;
++}
++
++int omap_dss_get_num_overlay_managers(void)
++{
++	return num_managers;
++}
++EXPORT_SYMBOL(omap_dss_get_num_overlay_managers);
++
++struct omap_overlay_manager *omap_dss_get_overlay_manager(int num)
++{
++	int i = 0;
++	struct omap_overlay_manager *mgr;
++
++	list_for_each_entry(mgr, &manager_list, list) {
++		if (i++ == num)
++			return mgr;
++	}
++
++	return NULL;
++}
++EXPORT_SYMBOL(omap_dss_get_overlay_manager);
++
++#ifdef L4_EXAMPLE
++static int ovl_mgr_apply_l4(struct omap_overlay_manager *mgr)
++{
++	DSSDBG("omap_dss_mgr_apply_l4(%s)\n", mgr->name);
++
++	return 0;
++}
++#endif
++
+diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
+new file mode 100644
+index 0000000..968edbe
+--- /dev/null
++++ b/drivers/video/omap2/dss/overlay.c
+@@ -0,0 +1,587 @@
++/*
++ * linux/drivers/video/omap2/dss/overlay.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#define DSS_SUBSYS_NAME "OVERLAY"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/sysfs.h>
++#include <linux/kobject.h>
++#include <linux/platform_device.h>
++
++#include <mach/display.h>
++
++#include "dss.h"
++
++static int num_overlays;
++static struct list_head overlay_list;
++
++static ssize_t overlay_name_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%s\n", ovl->name);
++}
++
++static ssize_t overlay_manager_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%s\n",
++			ovl->manager ? ovl->manager->name : "<none>");
++}
++
++static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf, size_t size)
++{
++	int i, r;
++	struct omap_overlay_manager *mgr = NULL;
++	int len = size;
++
++	if (buf[size-1] == '\n')
++		--len;
++
++	if (len > 0) {
++		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
++			mgr = omap_dss_get_overlay_manager(i);
++
++			if (strncmp(buf, mgr->name, len) == 0)
++				break;
++
++			mgr = NULL;
++		}
++	}
++
++	if (len > 0 && mgr == NULL)
++		return -EINVAL;
++
++	if (mgr)
++		DSSDBG("manager %s found\n", mgr->name);
++
++	if (mgr != ovl->manager) {
++		/* detach old manager */
++		if (ovl->manager) {
++			r = ovl->unset_manager(ovl);
++			if (r) {
++				DSSERR("detach failed\n");
++				return r;
++			}
++		}
++
++		if (mgr) {
++			r = ovl->set_manager(ovl, mgr);
++			if (r) {
++				DSSERR("Failed to attach overlay\n");
++				return r;
++			}
++		}
++	}
++
++	if (ovl->manager && (r = ovl->manager->apply(ovl->manager)))
++		return r;
++
++	return size;
++}
++
++static ssize_t overlay_input_size_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
++			ovl->info.width, ovl->info.height);
++}
++
++static ssize_t overlay_screen_width_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.screen_width);
++}
++
++static ssize_t overlay_position_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
++			ovl->info.pos_x, ovl->info.pos_y);
++}
++
++static ssize_t overlay_position_store(struct omap_overlay *ovl,
++		const char *buf, size_t size)
++{
++	int r;
++	char *last;
++	struct omap_overlay_info info;
++
++	ovl->get_overlay_info(ovl, &info);
++
++	info.pos_x = simple_strtoul(buf, &last, 10);
++	++last;
++	if (last - buf >= size)
++		return -EINVAL;
++
++	info.pos_y = simple_strtoul(last, &last, 10);
++
++	if ((r = ovl->set_overlay_info(ovl, &info)))
++		return r;
++
++	if (ovl->manager && (r = ovl->manager->apply(ovl->manager)))
++		return r;
++
++	return size;
++}
++
++static ssize_t overlay_output_size_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d,%d\n",
++			ovl->info.out_width, ovl->info.out_height);
++}
++
++static ssize_t overlay_output_size_store(struct omap_overlay *ovl,
++		const char *buf, size_t size)
++{
++	int r;
++	char *last;
++	struct omap_overlay_info info;
++
++	ovl->get_overlay_info(ovl, &info);
++
++	info.out_width = simple_strtoul(buf, &last, 10);
++	++last;
++	if (last - buf >= size)
++		return -EINVAL;
++
++	info.out_height = simple_strtoul(last, &last, 10);
++
++	if ((r = ovl->set_overlay_info(ovl, &info)))
++		return r;
++
++	if (ovl->manager && (r = ovl->manager->apply(ovl->manager)))
++		return r;
++
++	return size;
++}
++
++static ssize_t overlay_enabled_show(struct omap_overlay *ovl, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d\n", ovl->info.enabled);
++}
++
++static ssize_t overlay_enabled_store(struct omap_overlay *ovl, const char *buf, size_t size)
++{
++	int r;
++	struct omap_overlay_info info;
++
++	ovl->get_overlay_info(ovl, &info);
++
++	info.enabled = simple_strtoul(buf, NULL, 10);
++
++	if ((r = ovl->set_overlay_info(ovl, &info)))
++		return r;
++
++	if (ovl->manager && (r = ovl->manager->apply(ovl->manager)))
++		return r;
++
++	return size;
++}
++
++struct overlay_attribute {
++	struct attribute attr;
++	ssize_t (*show)(struct omap_overlay *, char *);
++	ssize_t	(*store)(struct omap_overlay *, const char *, size_t);
++};
++
++#define OVERLAY_ATTR(_name, _mode, _show, _store) \
++	struct overlay_attribute overlay_attr_##_name = \
++	__ATTR(_name, _mode, _show, _store)
++
++static OVERLAY_ATTR(name, S_IRUGO, overlay_name_show, NULL);
++static OVERLAY_ATTR(manager, S_IRUGO|S_IWUSR,
++		overlay_manager_show, overlay_manager_store);
++static OVERLAY_ATTR(input_size, S_IRUGO, overlay_input_size_show, NULL);
++static OVERLAY_ATTR(screen_width, S_IRUGO, overlay_screen_width_show, NULL);
++static OVERLAY_ATTR(position, S_IRUGO|S_IWUSR,
++		overlay_position_show, overlay_position_store);
++static OVERLAY_ATTR(output_size, S_IRUGO|S_IWUSR,
++		overlay_output_size_show, overlay_output_size_store);
++static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
++		overlay_enabled_show, overlay_enabled_store);
++
++static struct attribute *overlay_sysfs_attrs[] = {
++	&overlay_attr_name.attr,
++	&overlay_attr_manager.attr,
++	&overlay_attr_input_size.attr,
++	&overlay_attr_screen_width.attr,
++	&overlay_attr_position.attr,
++	&overlay_attr_output_size.attr,
++	&overlay_attr_enabled.attr,
++	NULL
++};
++
++static ssize_t overlay_attr_show(struct kobject *kobj, struct attribute *attr, char *buf)
++{
++	struct omap_overlay *overlay;
++	struct overlay_attribute *overlay_attr;
++
++	overlay = container_of(kobj, struct omap_overlay, kobj);
++	overlay_attr = container_of(attr, struct overlay_attribute, attr);
++
++	if (!overlay_attr->show)
++		return -ENOENT;
++
++	return overlay_attr->show(overlay, buf);
++}
++
++static ssize_t overlay_attr_store(struct kobject *kobj, struct attribute *attr,
++		const char *buf, size_t size)
++{
++	struct omap_overlay *overlay;
++	struct overlay_attribute *overlay_attr;
++
++	overlay = container_of(kobj, struct omap_overlay, kobj);
++	overlay_attr = container_of(attr, struct overlay_attribute, attr);
++
++	if (!overlay_attr->store)
++		return -ENOENT;
++
++	return overlay_attr->store(overlay, buf, size);
++}
++
++static struct sysfs_ops overlay_sysfs_ops = {
++	.show = overlay_attr_show,
++	.store = overlay_attr_store,
++};
++
++static struct kobj_type overlay_ktype = {
++	.sysfs_ops = &overlay_sysfs_ops,
++	.default_attrs = overlay_sysfs_attrs,
++};
++
++/* Check if overlay parameters are compatible with display */
++int dss_check_overlay(struct omap_overlay *ovl, struct omap_display *display)
++{
++	struct omap_overlay_info *info;
++	u16 outw, outh;
++	u16 dw, dh;
++
++	if (!display)
++		return 0;
++
++	if (!ovl->info.enabled)
++		return 0;
++
++	info = &ovl->info;
++
++	display->get_resolution(display, &dw, &dh);
++
++	DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",
++			ovl->id,
++			info->pos_x, info->pos_y,
++			info->width, info->height,
++			info->out_width, info->out_height,
++			dw, dh);
++
++	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
++		outw = info->width;
++		outh = info->height;
++	} else {
++		if (info->out_width == 0)
++			outw = info->width;
++		else
++			outw = info->out_width;
++
++		if (info->out_height == 0)
++			outh = info->height;
++		else
++			outh = info->out_height;
++	}
++
++	if (dw < info->pos_x + outw) {
++		DSSDBG("check_overlay failed 1: %d < %d + %d\n",
++				dw, info->pos_x, outw);
++		return -EINVAL;
++	}
++
++	if (dh < info->pos_y + outh) {
++		DSSDBG("check_overlay failed 2: %d < %d + %d\n",
++				dh, info->pos_y, outh);
++		return -EINVAL;
++	}
++
++	if ((ovl->supported_modes & info->color_mode) == 0) {
++		DSSERR("overlay doesn't support mode %d\n", info->color_mode);
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++static int dss_ovl_set_overlay_info(struct omap_overlay *ovl,
++		struct omap_overlay_info *info)
++{
++	int r;
++	struct omap_overlay_info old_info;
++
++	old_info = ovl->info;
++	ovl->info = *info;
++
++	if (ovl->manager) {
++		r = dss_check_overlay(ovl, ovl->manager->display);
++		if (r) {
++			ovl->info = old_info;
++			return r;
++		}
++	}
++
++	return 0;
++}
++
++static void dss_ovl_get_overlay_info(struct omap_overlay *ovl,
++		struct omap_overlay_info *info)
++{
++	*info = ovl->info;
++}
++
++static int omap_dss_set_manager(struct omap_overlay *ovl,
++		struct omap_overlay_manager *mgr)
++{
++	int r;
++
++	if (ovl->manager) {
++		DSSERR("overlay '%s' already has a manager '%s'\n",
++				ovl->name, ovl->manager->name);
++	}
++
++	r = dss_check_overlay(ovl, mgr->display);
++	if (r)
++		return r;
++
++	ovl->manager = mgr;
++
++	return 0;
++}
++
++static int omap_dss_unset_manager(struct omap_overlay *ovl)
++{
++	if (!ovl->manager) {
++		DSSERR("failed to detach overlay: manager not set\n");
++		return -EINVAL;
++	}
++
++	ovl->manager = NULL;
++
++	return 0;
++}
++
++int omap_dss_get_num_overlays(void)
++{
++	return num_overlays;
++}
++EXPORT_SYMBOL(omap_dss_get_num_overlays);
++
++struct omap_overlay *omap_dss_get_overlay(int num)
++{
++	int i = 0;
++	struct omap_overlay *ovl;
++
++	list_for_each_entry(ovl, &overlay_list, list) {
++		if (i++ == num)
++			return ovl;
++	}
++
++	return NULL;
++}
++EXPORT_SYMBOL(omap_dss_get_overlay);
++
++static void omap_dss_add_overlay(struct omap_overlay *overlay)
++{
++	++num_overlays;
++	list_add_tail(&overlay->list, &overlay_list);
++}
++
++static struct omap_overlay *dispc_overlays[3];
++
++void dss_overlay_setup_dispc_manager(struct omap_overlay_manager *mgr)
++{
++	mgr->num_overlays = 3;
++	mgr->overlays = dispc_overlays;
++}
++
++void dss_init_overlays(struct platform_device *pdev, const char *def_disp_name)
++{
++	int i, r;
++	struct omap_overlay_manager *lcd_mgr;
++	struct omap_overlay_manager *tv_mgr;
++	struct omap_overlay_manager *def_mgr = NULL;
++
++	INIT_LIST_HEAD(&overlay_list);
++
++	num_overlays = 0;
++
++	for (i = 0; i < 3; ++i) {
++		struct omap_overlay *ovl;
++		ovl = kzalloc(sizeof(*ovl), GFP_KERNEL);
++
++		BUG_ON(ovl == NULL);
++
++		switch (i) {
++		case 0:
++			ovl->name = "gfx";
++			ovl->id = OMAP_DSS_GFX;
++			ovl->supported_modes = OMAP_DSS_COLOR_GFX_OMAP3;
++			ovl->caps = OMAP_DSS_OVL_CAP_DISPC;
++			break;
++		case 1:
++			ovl->name = "vid1";
++			ovl->id = OMAP_DSS_VIDEO1;
++			ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3;
++			ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
++				OMAP_DSS_OVL_CAP_DISPC;
++			break;
++		case 2:
++			ovl->name = "vid2";
++			ovl->id = OMAP_DSS_VIDEO2;
++			ovl->supported_modes = OMAP_DSS_COLOR_VID_OMAP3;
++			ovl->caps = OMAP_DSS_OVL_CAP_SCALE |
++				OMAP_DSS_OVL_CAP_DISPC;
++			break;
++		}
++
++		ovl->set_manager = &omap_dss_set_manager;
++		ovl->unset_manager = &omap_dss_unset_manager;
++		ovl->set_overlay_info = &dss_ovl_set_overlay_info;
++		ovl->get_overlay_info = &dss_ovl_get_overlay_info;
++
++		omap_dss_add_overlay(ovl);
++
++		r = kobject_init_and_add(&ovl->kobj, &overlay_ktype,
++				&pdev->dev.kobj, "overlay%d", i);
++
++		if (r) {
++			DSSERR("failed to create sysfs file\n");
++			continue;
++		}
++
++		dispc_overlays[i] = ovl;
++	}
++
++	lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD);
++	tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV);
++
++	if (def_disp_name) {
++		for (i = 0; i < omap_dss_get_num_displays() ; i++) {
++			struct omap_display *display = dss_get_display(i);
++
++			if (strcmp(display->name, def_disp_name) == 0) {
++				if (display->type != OMAP_DISPLAY_TYPE_VENC) {
++					lcd_mgr->set_display(lcd_mgr, display);
++					def_mgr = lcd_mgr;
++				} else {
++					lcd_mgr->set_display(tv_mgr, display);
++					def_mgr = tv_mgr;
++				}
++
++				break;
++			}
++		}
++
++		if (!def_mgr)
++			DSSWARN("default display %s not found\n",
++					def_disp_name);
++	}
++
++	if (def_mgr != lcd_mgr) {
++		/* connect lcd manager to first non-VENC display found */
++		for (i = 0; i < omap_dss_get_num_displays(); i++) {
++			struct omap_display *display = dss_get_display(i);
++			if (display->type != OMAP_DISPLAY_TYPE_VENC) {
++				lcd_mgr->set_display(lcd_mgr, display);
++
++				if (!def_mgr)
++					def_mgr = lcd_mgr;
++
++				break;
++			}
++		}
++	}
++
++	if (def_mgr != tv_mgr) {
++		/* connect tv manager to first VENC display found */
++		for (i = 0; i < omap_dss_get_num_displays(); i++) {
++			struct omap_display *display = dss_get_display(i);
++			if (display->type == OMAP_DISPLAY_TYPE_VENC) {
++				tv_mgr->set_display(tv_mgr, display);
++
++				if (!def_mgr)
++					def_mgr = tv_mgr;
++
++				break;
++			}
++		}
++	}
++
++	/* connect all dispc overlays to def_mgr */
++	if (def_mgr) {
++		for (i = 0; i < 3; i++) {
++			struct omap_overlay *ovl;
++			ovl = omap_dss_get_overlay(i);
++			omap_dss_set_manager(ovl, def_mgr);
++		}
++	}
++
++#ifdef L4_EXAMPLE
++	/* setup L4 overlay as an example */
++	{
++		static struct omap_overlay ovl = {
++			.name = "l4-ovl",
++			.supported_modes = OMAP_DSS_COLOR_RGB24U,
++			.set_manager = &omap_dss_set_manager,
++			.unset_manager = &omap_dss_unset_manager,
++			.setup_input = &omap_dss_setup_overlay_input,
++			.setup_output = &omap_dss_setup_overlay_output,
++			.enable = &omap_dss_enable_overlay,
++		};
++
++		static struct omap_overlay_manager mgr = {
++			.name = "l4",
++			.num_overlays = 1,
++			.overlays = &ovl,
++			.set_display = &omap_dss_set_display,
++			.unset_display = &omap_dss_unset_display,
++			.apply = &ovl_mgr_apply_l4,
++			.supported_displays =
++				OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI,
++		};
++
++		omap_dss_add_overlay(&ovl);
++		omap_dss_add_overlay_manager(&mgr);
++		omap_dss_set_manager(&ovl, &mgr);
++	}
++#endif
++}
++
++void dss_uninit_overlays(struct platform_device *pdev)
++{
++	struct omap_overlay *ovl;
++
++	while (!list_empty(&overlay_list)) {
++		ovl = list_first_entry(&overlay_list,
++				struct omap_overlay, list);
++		list_del(&ovl->list);
++		kobject_del(&ovl->kobj);
++		kobject_put(&ovl->kobj);
++		kfree(ovl);
++	}
++
++	num_overlays = 0;
++}
++
+diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
+new file mode 100644
+index 0000000..3e9ae1e
+--- /dev/null
++++ b/drivers/video/omap2/dss/rfbi.c
+@@ -0,0 +1,1304 @@
++/*
++ * linux/drivers/video/omap2/dss/rfbi.c
++ *
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * Some code and ideas taken from drivers/video/omap/ driver
@@ -7961,6 +12317,7 @@ index 0000000..b4b65e6
 +#include <linux/kfifo.h>
 +#include <linux/ktime.h>
 +#include <linux/hrtimer.h>
++#include <linux/seq_file.h>
 +
 +#include <mach/board.h>
 +#include <mach/display.h>
@@ -8089,7 +12446,7 @@ index 0000000..b4b65e6
 +	return __raw_readl(rfbi.base + idx.idx);
 +}
 +
-+static void rfbi_enable_clocks(int enable)
++static void rfbi_enable_clocks(bool enable)
 +{
 +	if (enable)
 +		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
@@ -8192,8 +12549,9 @@ index 0000000..b4b65e6
 +}
 +EXPORT_SYMBOL(omap_rfbi_write_data);
 +
-+void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y,
-+			    int w, int h)
++void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
++		u16 x, u16 y,
++		u16 w, u16 h)
 +{
 +	int start_offset = scr_width * y + x;
 +	int horiz_offset = scr_width - w;
@@ -8203,41 +12561,41 @@ index 0000000..b4b65e6
 +
 +	if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
 +	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
-+		const u16 *pd = buf;
++		const u16 __iomem *pd = buf;
 +		pd += start_offset;
 +
 +		for (; h; --h) {
 +			for (i = 0; i < w; ++i) {
-+				const u8 *b = (const u8 *)pd;
-+				rfbi_write_reg(RFBI_PARAM, *(b+1));
-+				rfbi_write_reg(RFBI_PARAM, *(b+0));
++				const u8 __iomem *b = (const u8 __iomem *)pd;
++				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
++				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
 +				++pd;
 +			}
 +			pd += horiz_offset;
 +		}
 +	} else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_24 &&
 +	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_8) {
-+		const u32 *pd = buf;
++		const u32 __iomem *pd = buf;
 +		pd += start_offset;
 +
 +		for (; h; --h) {
 +			for (i = 0; i < w; ++i) {
-+				const u8 *b = (const u8 *)pd;
-+				rfbi_write_reg(RFBI_PARAM, *(b+2));
-+				rfbi_write_reg(RFBI_PARAM, *(b+1));
-+				rfbi_write_reg(RFBI_PARAM, *(b+0));
++				const u8 __iomem *b = (const u8 __iomem *)pd;
++				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+2));
++				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+1));
++				rfbi_write_reg(RFBI_PARAM, __raw_readb(b+0));
 +				++pd;
 +			}
 +			pd += horiz_offset;
 +		}
 +	} else if (rfbi.datatype == OMAP_DSS_RFBI_DATATYPE_16 &&
 +	   rfbi.parallelmode == OMAP_DSS_RFBI_PARALLELMODE_16) {
-+		const u16 *pd = buf;
++		const u16 __iomem *pd = buf;
 +		pd += start_offset;
 +
 +		for (; h; --h) {
 +			for (i = 0; i < w; ++i) {
-+				rfbi_write_reg(RFBI_PARAM, *pd);
++				rfbi_write_reg(RFBI_PARAM, __raw_readw(pd));
 +				++pd;
 +			}
 +			pd += horiz_offset;
@@ -8299,7 +12657,7 @@ index 0000000..b4b65e6
 +#define perf_show(x)
 +#endif
 +
-+void rfbi_transfer_area(int width, int height,
++void rfbi_transfer_area(u16 width, u16 height,
 +			     void (callback)(void *data), void *data)
 +{
 +	u32 l;
@@ -8668,7 +13026,7 @@ index 0000000..b4b65e6
 +EXPORT_SYMBOL(omap_rfbi_setup_te);
 +
 +/* xxx FIX module selection missing */
-+int omap_rfbi_enable_te(int enable, unsigned line)
++int omap_rfbi_enable_te(bool enable, unsigned line)
 +{
 +	u32 l;
 +
@@ -8891,10 +13249,10 @@ index 0000000..b4b65e6
 +/* returns 1 for async op, and 0 for sync op */
 +static int do_update(struct omap_display *display, struct update_region *upd)
 +{
-+	int x = upd->x;
-+	int y = upd->y;
-+	int w = upd->w;
-+	int h = upd->h;
++	u16 x = upd->x;
++	u16 y = upd->y;
++	u16 w = upd->w;
++	u16 h = upd->h;
 +
 +	perf_mark_setup();
 +
@@ -8914,10 +13272,10 @@ index 0000000..b4b65e6
 +		return 1;
 +	} else {
 +		struct omap_overlay *ovl;
-+		void *addr;
++		void __iomem *addr;
 +		int scr_width;
 +
-+		ovl = &display->manager->overlays[0];
++		ovl = display->manager->overlays[0];
 +		scr_width = ovl->info.screen_width;
 +		addr = ovl->info.vaddr;
 +
@@ -9041,6 +13399,45 @@ index 0000000..b4b65e6
 +	process_cmd_fifo();
 +}
 +
++void rfbi_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, rfbi_read_reg(r))
++
++	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	DUMPREG(RFBI_REVISION);
++	DUMPREG(RFBI_SYSCONFIG);
++	DUMPREG(RFBI_SYSSTATUS);
++	DUMPREG(RFBI_CONTROL);
++	DUMPREG(RFBI_PIXEL_CNT);
++	DUMPREG(RFBI_LINE_NUMBER);
++	DUMPREG(RFBI_CMD);
++	DUMPREG(RFBI_PARAM);
++	DUMPREG(RFBI_DATA);
++	DUMPREG(RFBI_READ);
++	DUMPREG(RFBI_STATUS);
++
++	DUMPREG(RFBI_CONFIG(0));
++	DUMPREG(RFBI_ONOFF_TIME(0));
++	DUMPREG(RFBI_CYCLE_TIME(0));
++	DUMPREG(RFBI_DATA_CYCLE1(0));
++	DUMPREG(RFBI_DATA_CYCLE2(0));
++	DUMPREG(RFBI_DATA_CYCLE3(0));
++
++	DUMPREG(RFBI_CONFIG(1));
++	DUMPREG(RFBI_ONOFF_TIME(1));
++	DUMPREG(RFBI_CYCLE_TIME(1));
++	DUMPREG(RFBI_DATA_CYCLE1(1));
++	DUMPREG(RFBI_DATA_CYCLE2(1));
++	DUMPREG(RFBI_DATA_CYCLE3(1));
++
++	DUMPREG(RFBI_VSYNC_WIDTH);
++	DUMPREG(RFBI_HSYNC_WIDTH);
++
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++#undef DUMPREG
++}
++
 +int rfbi_init(void)
 +{
 +	u32 rev;
@@ -9093,7 +13490,7 @@ index 0000000..b4b65e6
 +
 +/* struct omap_display support */
 +static int rfbi_display_update(struct omap_display *display,
-+			int x, int y, int w, int h)
++			u16 x, u16 y, u16 w, u16 h)
 +{
 +	int rfbi_module;
 +
@@ -9122,7 +13519,7 @@ index 0000000..b4b65e6
 +	return 0;
 +}
 +
-+static int rfbi_display_enable_te(struct omap_display *display, int enable)
++static int rfbi_display_enable_te(struct omap_display *display, bool enable)
 +{
 +	display->ctrl->enable_te(display, enable);
 +	return 0;
@@ -9175,7 +13572,8 @@ index 0000000..b4b65e6
 +static void rfbi_display_disable(struct omap_display *display)
 +{
 +	display->ctrl->disable(display);
-+	omap_dispc_unregister_isr(framedone_callback);
++	omap_dispc_unregister_isr(framedone_callback, NULL,
++			DISPC_IRQ_FRAMEDONE);
 +}
 +
 +void rfbi_init_display(struct omap_display *display)
@@ -9190,16 +13588,16 @@ index 0000000..b4b65e6
 +
 +	display->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE;
 +}
-diff --git a/arch/arm/plat-omap/dss/sdi.c b/arch/arm/plat-omap/dss/sdi.c
+diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
 new file mode 100644
-index 0000000..02d549b
+index 0000000..fbff2b2
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/sdi.c
-@@ -0,0 +1,174 @@
++++ b/drivers/video/omap2/dss/sdi.c
+@@ -0,0 +1,245 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/sdi.c
++ * linux/drivers/video/omap2/dss/sdi.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * This program is free software; you can redistribute it and/or modify it
@@ -9228,59 +13626,52 @@ index 0000000..02d549b
 +
 +
 +static struct {
-+	int update_enabled;
++	bool skip_init;
++	bool update_enabled;
 +} sdi;
 +
++static void sdi_basic_init(void)
++{
++	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
++
++	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
++	dispc_set_tft_data_lines(24);
++	dispc_lcd_enable_signal_polarity(1);
++}
++
 +static int sdi_display_enable(struct omap_display *display)
 +{
 +	struct dispc_clock_info cinfo;
-+	int lck_div, pck_div;
++	u16 lck_div, pck_div;
 +	unsigned long fck;
 +	struct omap_panel *panel = display->panel;
-+	unsigned high, low, burst;
 +	unsigned long pck;
++	int r;
 +
 +	if (display->state != OMAP_DSS_DISPLAY_DISABLED) {
 +		DSSERR("display already enabled\n");
 +		return -EINVAL;
 +	}
 +
-+	panel->enable(display);
-+
-+	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
-+
-+	dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS);
-+
-+	dispc_set_burst_size(OMAP_DSS_GFX, OMAP_DSS_BURST_16x32);
-+	dispc_set_burst_size(OMAP_DSS_VIDEO1, OMAP_DSS_BURST_16x32);
-+	dispc_set_burst_size(OMAP_DSS_VIDEO2, OMAP_DSS_BURST_16x32);
-+
-+	burst = 16 * 32 / 8;
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_GFX) - burst;
-+	low = dispc_get_plane_fifo_size(OMAP_DSS_GFX) / 4 * 3;
-+	dispc_setup_plane_fifo(OMAP_DSS_GFX, low, high);
-+
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) - burst;
-+	low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO1) / 4 * 3;
-+	dispc_setup_plane_fifo(OMAP_DSS_VIDEO1, low, high);
++	/* In case of skip_init sdi_init has already enabled the clocks */
++	if (!sdi.skip_init)
++		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +
-+	high = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) - burst;
-+	low = dispc_get_plane_fifo_size(OMAP_DSS_VIDEO2) / 4 * 3;
-+	dispc_setup_plane_fifo(OMAP_DSS_VIDEO2, low, high);
++	sdi_basic_init();
 +
 +	/* 15.5.9.1.2 */
 +	panel->config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
 +
 +	dispc_set_pol_freq(panel);
 +
-+	dispc_calc_clock_div(1, panel->timings.pixel_clock * 1000,
-+			&cinfo);
++	if (!sdi.skip_init)
++		r = dispc_calc_clock_div(1, panel->timings.pixel_clock * 1000,
++				&cinfo);
++	else
++		r = dispc_get_clock_div(&cinfo);
 +
-+	if (dispc_set_clock_div(&cinfo)) {
-+		DSSERR("Failed to set DSS clocks\n");
-+		return -EINVAL;
-+	}
++	if (r)
++		goto err0;
 +
 +	fck = cinfo.fck;
 +	lck_div = cinfo.lck_div;
@@ -9296,37 +13687,98 @@ index 0000000..02d549b
 +		panel->timings.pixel_clock = pck;
 +	}
 +
-+	dispc_set_lcd_timings(&panel->timings);
 +
-+	dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT);
-+	dispc_set_tft_data_lines(24);
-+	dispc_lcd_enable_signal_polarity(1);
-+	dispc_pck_free_enable(1);
++	dispc_set_lcd_timings(&panel->timings);
 +
-+	dss_sdi_init(display->hw_config.u.sdi.datapairs);
++	r = dispc_set_clock_div(&cinfo);
++	if (r)
++		goto err1;
 +
-+	mdelay(2);
++	if (!sdi.skip_init) {
++		dss_sdi_init(display->hw_config.u.sdi.datapairs);
++		dss_sdi_enable();
++		mdelay(2);
++	}
 +
 +	dispc_enable_lcd_out(1);
 +
++	r = panel->enable(display);
++	if (r)
++		goto err2;
++
 +	display->state = OMAP_DSS_DISPLAY_ACTIVE;
 +
++	sdi.skip_init = 0;
++
 +	return 0;
++err2:
++	dispc_enable_lcd_out(0);
++err1:
++err0:
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++	return r;
 +}
 +
++static int sdi_display_resume(struct omap_display *display);
++
 +static void sdi_display_disable(struct omap_display *display)
 +{
 +	if (display->state == OMAP_DSS_DISPLAY_DISABLED)
 +		return;
 +
++	if (display->state == OMAP_DSS_DISPLAY_SUSPENDED)
++		sdi_display_resume(display);
++
 +	display->panel->disable(display);
++
 +	dispc_enable_lcd_out(0);
 +
++	dss_sdi_disable();
++
 +	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +
 +	display->state = OMAP_DSS_DISPLAY_DISABLED;
 +}
 +
++static int sdi_display_suspend(struct omap_display *display)
++{
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++		return -EINVAL;
++
++	if (display->panel->suspend)
++		display->panel->suspend(display);
++
++	dispc_enable_lcd_out(0);
++
++	dss_sdi_disable();
++
++	dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	display->state = OMAP_DSS_DISPLAY_SUSPENDED;
++
++	return 0;
++}
++
++static int sdi_display_resume(struct omap_display *display)
++{
++	if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
++		return -EINVAL;
++
++	dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
++
++	dss_sdi_enable();
++	mdelay(2);
++
++	dispc_enable_lcd_out(1);
++
++	if (display->panel->resume)
++		display->panel->resume(display);
++
++	display->state = OMAP_DSS_DISPLAY_ACTIVE;
++
++	return 0;
++}
++
 +static int sdi_display_set_update_mode(struct omap_display *display,
 +		enum omap_dss_update_mode mode)
 +{
@@ -9351,6 +13803,11 @@ index 0000000..02d549b
 +		OMAP_DSS_UPDATE_DISABLED;
 +}
 +
++static void sdi_get_timings(struct omap_display *display,
++			struct omap_video_timings *timings)
++{
++	*timings = display->panel->timings;
++}
 +
 +void sdi_init_display(struct omap_display *display)
 +{
@@ -9358,28 +13815,40 @@ index 0000000..02d549b
 +
 +	display->enable = sdi_display_enable;
 +	display->disable = sdi_display_disable;
++	display->suspend = sdi_display_suspend;
++	display->resume = sdi_display_resume;
 +	display->set_update_mode = sdi_display_set_update_mode;
 +	display->get_update_mode = sdi_display_get_update_mode;
++	display->get_timings = sdi_get_timings;
 +}
 +
-+int sdi_init(void)
++int sdi_init(bool skip_init)
 +{
++	/* we store this for first display enable, then clear it */
++	sdi.skip_init = skip_init;
++
++	/*
++	 * Enable clocks already here, otherwise there would be a toggle
++	 * of them until sdi_display_enable is called.
++	 */
++	if (skip_init)
++		dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
 +	return 0;
 +}
 +
 +void sdi_exit(void)
 +{
 +}
-diff --git a/arch/arm/plat-omap/dss/venc.c b/arch/arm/plat-omap/dss/venc.c
+diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
 new file mode 100644
-index 0000000..81319e4
+index 0000000..aceed9f
 --- /dev/null
-+++ b/arch/arm/plat-omap/dss/venc.c
-@@ -0,0 +1,506 @@
++++ b/drivers/video/omap2/dss/venc.c
+@@ -0,0 +1,600 @@
 +/*
-+ * linux/arch/arm/plat-omap/dss/venc.c
++ * linux/drivers/video/omap2/dss/venc.c
 + *
-+ * Copyright (C) 2008 Nokia Corporation
++ * Copyright (C) 2009 Nokia Corporation
 + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 + *
 + * VENC settings from TI's DSS driver
@@ -9400,12 +13869,14 @@ index 0000000..81319e4
 +#define DSS_SUBSYS_NAME "VENC"
 +
 +#include <linux/kernel.h>
++#include <linux/module.h>
 +#include <linux/clk.h>
 +#include <linux/err.h>
 +#include <linux/io.h>
 +#include <linux/mutex.h>
 +#include <linux/completion.h>
 +#include <linux/delay.h>
++#include <linux/string.h>
 +
 +#include <mach/display.h>
 +#include <mach/cpu.h>
@@ -9499,9 +13970,6 @@ index 0000000..81319e4
 +	u32 tvdetgp_int_start_stop_x;
 +	u32 tvdetgp_int_start_stop_y;
 +	u32 gen_ctrl;
-+
-+	int width;
-+	int height;
 +};
 +
 +/* from TRM */
@@ -9530,7 +13998,7 @@ index 0000000..81319e4
 +
 +	.savid__eavid				= 0x06A70108,
 +	.flen__fal				= 0x00180270,
-+	.lal__phase_reset			= 0x00180270,
++	.lal__phase_reset			= 0x00040135,
 +	.hs_int_start_stop_x			= 0x00880358,
 +	.hs_ext_start_stop_x			= 0x000F035F,
 +	.vs_int_start_x				= 0x01A70000,
@@ -9547,9 +14015,6 @@ index 0000000..81319e4
 +	.tvdetgp_int_start_stop_x		= 0x00140001,
 +	.tvdetgp_int_start_stop_y		= 0x00010001,
 +	.gen_ctrl				= 0x00FF0000,
-+
-+	.width = 720,
-+	.height = 574, /* for some reason, this isn't 576 */
 +};
 +
 +/* from TRM */
@@ -9595,9 +14060,6 @@ index 0000000..81319e4
 +	.tvdetgp_int_start_stop_x		= 0x00140001,
 +	.tvdetgp_int_start_stop_y		= 0x00010001,
 +	.gen_ctrl				= 0x00F90000,
-+
-+	.width = 720,
-+	.height = 482,
 +};
 +
 +static const struct venc_config venc_config_pal_bdghi = {
@@ -9641,20 +14103,41 @@ index 0000000..81319e4
 +	.fid_int_start_x__fid_int_start_y	= 0x0005008A,
 +	.fid_int_offset_y__fid_ext_start_x	= 0x002E0138,
 +	.fid_ext_start_y__fid_ext_offset_y	= 0x01380005,
++};
 +
-+	.width = 720,
-+	.height = 576,
++const struct omap_video_timings omap_dss_pal_timings = {
++	.x_res = 720,
++	.y_res = 574,
++	.pixel_clock = 26181,
++	.hsw = 32,
++	.hfp = 80,
++	.hbp = 48,
++	.vsw = 7,
++	.vfp = 3,
++	.vbp = 6,
 +};
++EXPORT_SYMBOL(omap_dss_pal_timings);
++
++const struct omap_video_timings omap_dss_ntsc_timings = {
++	.x_res = 720,
++	.y_res = 482,
++	.pixel_clock = 22153,
++	.hsw = 32,
++	.hfp = 80,
++	.hbp = 48,
++	.vsw = 10,
++	.vfp = 3,
++	.vbp = 6,
++};
++EXPORT_SYMBOL(omap_dss_ntsc_timings);
 +
 +static struct {
 +	void __iomem *base;
-+	const struct venc_config *config;
 +	struct mutex venc_lock;
 +} venc;
 +
 +static struct omap_panel venc_panel = {
 +	.name = "tv-out",
-+	.bpp = 24,
 +};
 +
 +static inline void venc_write_reg(int idx, u32 val)
@@ -9727,13 +14210,16 @@ index 0000000..81319e4
 +{
 +	int t = 1000;
 +
-+	venc_write_reg(VENC_F_CONTROL, venc_read_reg(VENC_F_CONTROL) | (1<<8));
++	venc_write_reg(VENC_F_CONTROL, 1<<8);
 +	while (venc_read_reg(VENC_F_CONTROL) & (1<<8)) {
 +		if (--t == 0) {
 +			DSSERR("Failed to reset venc\n");
 +			return;
 +		}
 +	}
++
++	/* the magical sleep that makes things work */
++	msleep(20);
 +}
 +
 +static void venc_enable_clocks(int enable)
@@ -9746,20 +14232,25 @@ index 0000000..81319e4
 +				DSS_CLK_96M);
 +}
 +
++static const struct venc_config *venc_timings_to_config(
++		struct omap_video_timings *timings)
++{
++	if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0)
++		return &venc_config_pal_trm;
++
++	if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0)
++		return &venc_config_ntsc_trm;
++
++	BUG();
++}
++
 +int venc_init(void)
 +{
 +	u8 rev_id;
-+	int use_pal = 1; /* XXX */
 +
 +	mutex_init(&venc.venc_lock);
 +
-+	if (use_pal)
-+		venc.config = &venc_config_pal_trm;
-+	else
-+		venc.config = &venc_config_ntsc_trm;
-+
-+	venc_panel.timings.x_res = venc.config->width;
-+	venc_panel.timings.y_res = venc.config->height;
++	venc_panel.timings = omap_dss_pal_timings;
 +
 +	venc.base = ioremap(VENC_BASE, SZ_1K);
 +	if (!venc.base) {
@@ -9767,13 +14258,8 @@ index 0000000..81319e4
 +		return -ENOMEM;
 +	}
 +
-+	/* enable clocks */
 +	venc_enable_clocks(1);
 +
-+	/* configure venc */
-+	venc_reset();
-+	venc_write_config(venc.config);
-+
 +	rev_id = (u8)(venc_read_reg(VENC_REV_ID) & 0xff);
 +	printk(KERN_INFO "OMAP VENC rev %d\n", rev_id);
 +
@@ -9787,25 +14273,13 @@ index 0000000..81319e4
 +	iounmap(venc.base);
 +}
 +
-+static void venc_sync_lost_handler(void *arg, u32 mask)
-+{
-+	/* we just catch SYNC_LOST_DIGIT here so that
-+	 * dispc doesn't take it as an error */
-+}
-+
-+static int venc_enable_display(struct omap_display *display)
++static void venc_power_on(struct omap_display *display)
 +{
-+	DSSDBG("venc_enable_display\n");
-+
-+	mutex_lock(&venc.venc_lock);
-+
-+	if (display->state != OMAP_DSS_DISPLAY_DISABLED) {
-+		mutex_unlock(&venc.venc_lock);
-+		return -EINVAL;
-+	}
-+
 +	venc_enable_clocks(1);
 +
++	venc_reset();
++	venc_write_config(venc_timings_to_config(&display->panel->timings));
++
 +	dss_set_venc_output(display->hw_config.u.venc.type);
 +	dss_set_dac_pwrdn_bgz(1);
 +
@@ -9818,42 +14292,17 @@ index 0000000..81319e4
 +		venc_write_reg(VENC_OUTPUT_CONTROL, 0xd);
 +	}
 +
-+	venc_write_config(venc.config);
-+
-+	dispc_set_digit_size(venc.config->width, venc.config->height/2);
++	dispc_set_digit_size(display->panel->timings.x_res,
++			display->panel->timings.y_res/2);
 +
 +	if (display->hw_config.panel_enable)
 +		display->hw_config.panel_enable(display);
 +
-+	dispc_go(OMAP_DSS_CHANNEL_DIGIT);
-+
-+	omap_dispc_register_isr(venc_sync_lost_handler, NULL,
-+			DISPC_IRQ_SYNC_LOST_DIGIT);
-+
 +	dispc_enable_digit_out(1);
-+
-+	mdelay(20);
-+
-+	omap_dispc_unregister_isr(venc_sync_lost_handler);
-+
-+	display->state = OMAP_DSS_DISPLAY_ACTIVE;
-+
-+	mutex_unlock(&venc.venc_lock);
-+
-+	return 0;
 +}
 +
-+static void venc_disable_display(struct omap_display *display)
++static void venc_power_off(struct omap_display *display)
 +{
-+	DSSDBG("venc_disable_display\n");
-+
-+	mutex_lock(&venc.venc_lock);
-+
-+	if (display->state == OMAP_DSS_DISPLAY_DISABLED) {
-+		mutex_unlock(&venc.venc_lock);
-+		return;
-+	}
-+
 +	venc_write_reg(VENC_OUTPUT_CONTROL, 0);
 +	dss_set_dac_pwrdn_bgz(0);
 +
@@ -9863,493 +14312,139 @@ index 0000000..81319e4
 +		display->hw_config.panel_disable(display);
 +
 +	venc_enable_clocks(0);
-+
-+	display->state = OMAP_DSS_DISPLAY_DISABLED;
-+
-+	mutex_unlock(&venc.venc_lock);
-+}
-+
-+static void venc_get_timings(struct omap_display *display,
-+			struct omap_video_timings *timings)
-+{
-+	*timings = venc_panel.timings;
 +}
 +
-+void venc_init_display(struct omap_display *display)
++static int venc_enable_display(struct omap_display *display)
 +{
-+	display->panel = &venc_panel;
-+	display->enable = venc_enable_display;
-+	display->disable = venc_disable_display;
-+	display->get_timings = venc_get_timings;
-+}
-diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
-new file mode 100644
-index 0000000..49ab00a
---- /dev/null
-+++ b/arch/arm/plat-omap/include/mach/display.h
-@@ -0,0 +1,462 @@
-+/*
-+ * linux/include/asm-arm/arch-omap/display.h
-+ *
-+ * Copyright (C) 2008 Nokia Corporation
-+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published by
-+ * the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef __ASM_ARCH_OMAP_DISPLAY_H
-+#define __ASM_ARCH_OMAP_DISPLAY_H
-+
-+#include <asm/atomic.h>
-+
-+#define DISPC_IRQ_FRAMEDONE		(1 << 0)
-+#define DISPC_IRQ_VSYNC			(1 << 1)
-+#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
-+#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
-+#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
-+#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
-+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
-+#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
-+#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
-+#define DISPC_IRQ_OCP_ERR		(1 << 9)
-+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
-+#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
-+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
-+#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
-+#define DISPC_IRQ_SYNC_LOST		(1 << 14)
-+#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
-+
-+enum omap_display_type {
-+	OMAP_DISPLAY_TYPE_NONE		= 0,
-+	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
-+	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
-+	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
-+	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
-+	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
-+};
-+
-+enum omap_plane {
-+	OMAP_DSS_GFX	= 0,
-+	OMAP_DSS_VIDEO1	= 1,
-+	OMAP_DSS_VIDEO2	= 2
-+};
-+
-+enum omap_channel {
-+	OMAP_DSS_CHANNEL_LCD	= 0,
-+	OMAP_DSS_CHANNEL_DIGIT	= 1,
-+};
-+
-+enum omap_color_mode {
-+	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
-+	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
-+	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
-+	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
-+	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
-+	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
-+	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
-+	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
-+	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
-+	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
-+	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
-+	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
-+	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
-+	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
-+
-+	OMAP_DSS_COLOR_GFX_OMAP3 =
-+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
-+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
-+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
-+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
-+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
-+
-+	OMAP_DSS_COLOR_VID_OMAP3 =
-+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
-+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
-+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
-+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32 |
-+		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
-+};
-+
-+enum omap_lcd_display_type {
-+	OMAP_DSS_LCD_DISPLAY_STN,
-+	OMAP_DSS_LCD_DISPLAY_TFT,
-+};
-+
-+enum omap_dss_load_mode {
-+	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
-+	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
-+	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
-+	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
-+};
-+
-+enum omap_dss_color_key_type {
-+	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
-+	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
-+};
-+
-+enum omap_rfbi_te_mode {
-+	OMAP_DSS_RFBI_TE_MODE_1 = 1,
-+	OMAP_DSS_RFBI_TE_MODE_2 = 2,
-+};
-+
-+enum omap_panel_config {
-+	OMAP_DSS_LCD_IVS		= 1<<0,
-+	OMAP_DSS_LCD_IHS		= 1<<1,
-+	OMAP_DSS_LCD_IPC		= 1<<2,
-+	OMAP_DSS_LCD_IEO		= 1<<3,
-+	OMAP_DSS_LCD_RF			= 1<<4,
-+	OMAP_DSS_LCD_ONOFF		= 1<<5,
-+
-+	OMAP_DSS_LCD_TFT		= 1<<20,
-+};
-+
-+enum omap_dss_venc_type {
-+	OMAP_DSS_VENC_TYPE_COMPOSITE,
-+	OMAP_DSS_VENC_TYPE_SVIDEO,
-+};
-+
-+struct omap_display;
-+struct omap_panel;
-+struct omap_ctrl;
-+
-+/* RFBI */
-+
-+struct rfbi_timings {
-+	int cs_on_time;
-+	int cs_off_time;
-+	int we_on_time;
-+	int we_off_time;
-+	int re_on_time;
-+	int re_off_time;
-+	int we_cycle_time;
-+	int re_cycle_time;
-+	int cs_pulse_width;
-+	int access_time;
-+
-+	int clk_div;
-+
-+	u32 tim[5];             /* set by rfbi_convert_timings() */
-+
-+	int converted;
-+};
-+
-+void omap_rfbi_write_command(const void *buf, u32 len);
-+void omap_rfbi_read_data(void *buf, u32 len);
-+void omap_rfbi_write_data(const void *buf, u32 len);
-+void omap_rfbi_write_pixels(const void *buf, int scr_width, int x, int y,
-+			    int w, int h);
-+int omap_rfbi_enable_te(int enable, unsigned line);
-+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
-+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
-+			     int hs_pol_inv, int vs_pol_inv, int extif_div);
-+
-+/* DSI */
-+int dsi_vc_dcs_write(int channel, u8 *data, int len);
-+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
-+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
-+int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
-+int dsi_vc_send_null(int channel);
-+
-+/* Board specific data */
-+struct omap_display_data {
-+	enum omap_display_type type;
-+
-+	union {
-+		struct {
-+			int data_lines;
-+		} dpi;
-+
-+		struct {
-+			int channel;
-+			int data_lines;
-+		} rfbi;
-+
-+		struct {
-+			int datapairs;
-+		} sdi;
-+
-+		struct {
-+			int clk_lane;
-+			int clk_pol;
-+			int data1_lane;
-+			int data1_pol;
-+			int data2_lane;
-+			int data2_pol;
-+			unsigned long ddr_clk_hz;
-+		} dsi;
-+
-+		struct {
-+			enum omap_dss_venc_type type;
-+		} venc;
-+	} u;
-+
-+	int panel_reset_gpio;
-+	int ctrl_reset_gpio;
-+
-+	const char *name;		/* for debug */
-+	const char *ctrl_name;
-+	const char *panel_name;
-+
-+	void *priv;
-+
-+	/* platform specific enable/disable */
-+	int (*panel_enable)(struct omap_display *display);
-+	void (*panel_disable)(struct omap_display *display);
-+	int (*ctrl_enable)(struct omap_display *display);
-+	void (*ctrl_disable)(struct omap_display *display);
-+	int (*set_backlight)(struct omap_display *display,
-+			int level);
-+};
-+
-+struct device;
-+
-+/* Board specific data */
-+struct omap_dss_platform_data {
-+	unsigned (*get_last_off_on_transaction_id)(struct device *dev);
-+	int num_displays;
-+	struct omap_display_data *displays[];
-+};
-+
-+struct omap_ctrl {
-+	struct module *owner;
-+
-+	const char *name;
-+
-+	int (*init)(struct omap_display *display);
-+	void (*cleanup)(struct omap_display *display);
-+	int (*enable)(struct omap_display *display);
-+	void (*disable)(struct omap_display *display);
-+	int (*suspend)(struct omap_display *display);
-+	int (*resume)(struct omap_display *display);
-+	void (*setup_update)(struct omap_display *display,
-+			     int x, int y, int w, int h);
-+
-+	int (*enable_te)(struct omap_display *display, int enable);
-+
-+	int (*rotate)(struct omap_display *display, int rotate);
-+	int (*mirror)(struct omap_display *display, int enable);
-+
-+	int (*run_test)(struct omap_display *display, int test);
-+
-+	int pixel_size;
-+
-+	struct rfbi_timings timings;
-+
-+	void *priv;
-+};
-+
-+struct omap_video_timings {
-+	/* Unit: pixels */
-+	u16 x_res;
-+	/* Unit: pixels */
-+	u16 y_res;
-+	/* Unit: KHz */
-+	u32 pixel_clock;
-+	/* Unit: pixel clocks */
-+	u16 hsw;	/* Horizontal synchronization pulse width */
-+	/* Unit: pixel clocks */
-+	u16 hfp;	/* Horizontal front porch */
-+	/* Unit: pixel clocks */
-+	u16 hbp;	/* Horizontal back porch */
-+	/* Unit: line clocks */
-+	u16 vsw;	/* Vertical synchronization pulse width */
-+	/* Unit: line clocks */
-+	u16 vfp;	/* Vertical front porch */
-+	/* Unit: line clocks */
-+	u16 vbp;	/* Vertical back porch */
-+
-+};
-+
-+struct omap_panel {
-+	struct module *owner;
-+
-+	const char *name;
-+
-+	int (*init)(struct omap_display *display);
-+	void (*cleanup)(struct omap_display *display);
-+	int (*remove)(struct omap_display *display);
-+	int (*enable)(struct omap_display *display);
-+	void (*disable)(struct omap_display *display);
-+	int (*suspend)(struct omap_display *display);
-+	int (*resume)(struct omap_display *display);
-+	int (*run_test)(struct omap_display *display, int test);
-+
-+	struct omap_video_timings timings;
-+
-+	int acbi;	/* ac-bias pin transitions per interrupt */
-+	/* Unit: line clocks */
-+	int acb;	/* ac-bias pin frequency */
-+
-+	enum omap_panel_config config;
-+
-+	int bpp;
-+
-+	void *priv;
-+};
-+
-+/* XXX perhaps this should be removed */
-+enum omap_dss_overlay_managers {
-+	OMAP_DSS_OVL_MGR_LCD,
-+	OMAP_DSS_OVL_MGR_TV,
-+};
-+
-+struct omap_overlay_manager;
++	int r = 0;
 +
-+struct omap_overlay_info {
-+	int enabled;
-+	u32 paddr;
-+	void *vaddr;
-+	int screen_width;
-+	int pos_x;
-+	int pos_y;
-+	int width;
-+	int height;
-+	int out_width;	/* if 0, out_width == width */
-+	int out_height;	/* if 0, out_height == height */
-+	enum omap_color_mode color_mode;
-+};
++	DSSDBG("venc_enable_display\n");
 +
-+enum omap_overlay_caps {
-+	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
-+};
++	mutex_lock(&venc.venc_lock);
 +
-+struct omap_overlay {
++	if (display->state != OMAP_DSS_DISPLAY_DISABLED) {
++		r = -EINVAL;
++		goto err;
++	}
 +
-+	const char *name;
-+	int id;
-+	struct omap_overlay_manager *manager;
-+	enum omap_color_mode supported_modes;
-+	struct omap_overlay_info info;
-+	enum omap_overlay_caps caps;
++	venc_power_on(display);
 +
-+	int (*set_manager)(struct omap_overlay *ovl,
-+		struct omap_overlay_manager *mgr);
-+	int (*unset_manager)(struct omap_overlay *ovl);
++	display->state = OMAP_DSS_DISPLAY_ACTIVE;
++err:
++	mutex_unlock(&venc.venc_lock);
 +
-+	int (*setup_input)(struct omap_overlay *ovl,
-+			u32 paddr, void *vaddr,
-+			int screen_width,
-+			int width, int height,
-+			enum omap_color_mode color_mode);
-+	int (*setup_output)(struct omap_overlay *ovl,
-+			int pos_x, int pos_y,
-+			int out_width, int out_height);
-+	int (*enable)(struct omap_overlay *ovl, int enable);
-+};
++	return r;
++}
 +
-+enum omap_overlay_manager_caps {
-+	OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
-+};
++static void venc_disable_display(struct omap_display *display)
++{
++	DSSDBG("venc_disable_display\n");
 +
-+struct omap_overlay_manager {
++	mutex_lock(&venc.venc_lock);
 +
-+	const char *name;
-+	int id;
-+	enum omap_overlay_manager_caps caps;
-+	struct omap_display *display;
-+	int num_overlays;
-+	struct omap_overlay *overlays;
-+	enum omap_display_type supported_displays;
++	if (display->state == OMAP_DSS_DISPLAY_DISABLED)
++		goto end;
 +
-+	int (*set_display)(struct omap_overlay_manager *mgr,
-+		struct omap_display *display);
-+	int (*unset_display)(struct omap_overlay_manager *mgr);
++	if (display->state == OMAP_DSS_DISPLAY_SUSPENDED) {
++		/* suspended is the same as disabled with venc */
++		display->state = OMAP_DSS_DISPLAY_DISABLED;
++		goto end;
++	}
 +
-+	int (*apply)(struct omap_overlay_manager *mgr);
-+};
++	venc_power_off(display);
 +
-+enum omap_display_caps {
-+	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0,
-+};
++	display->state = OMAP_DSS_DISPLAY_DISABLED;
++end:
++	mutex_unlock(&venc.venc_lock);
++}
 +
-+enum omap_dss_update_mode {
-+	OMAP_DSS_UPDATE_DISABLED = 0,
-+	OMAP_DSS_UPDATE_AUTO,
-+	OMAP_DSS_UPDATE_MANUAL,
-+};
++static int venc_display_suspend(struct omap_display *display)
++{
++	int r = 0;
 +
-+enum omap_dss_display_state {
-+	OMAP_DSS_DISPLAY_DISABLED = 0,
-+	OMAP_DSS_DISPLAY_ACTIVE,
-+	OMAP_DSS_DISPLAY_SUSPENDED,
-+};
++	DSSDBG("venc_display_suspend\n");
 +
-+struct omap_display {
-+	/*atomic_t ref_count;*/
-+	int ref_count;
++	mutex_lock(&venc.venc_lock);
 +
-+	enum omap_display_type type;
-+	const char *name;
++	if (display->state != OMAP_DSS_DISPLAY_ACTIVE) {
++		r = -EINVAL;
++		goto err;
++	}
 +
-+	enum omap_display_caps caps;
++	venc_power_off(display);
 +
-+	struct omap_overlay_manager *manager;
++	display->state = OMAP_DSS_DISPLAY_SUSPENDED;
++err:
++	mutex_unlock(&venc.venc_lock);
 +
-+	enum omap_dss_display_state state;
++	return r;
++}
 +
-+	struct omap_display_data hw_config;	/* board specific data */
-+	struct omap_ctrl *ctrl;			/* static common data */
-+	struct omap_panel *panel;		/* static common data */
++static int venc_display_resume(struct omap_display *display)
++{
++	int r = 0;
 +
-+	int (*enable)(struct omap_display *display);
-+	void (*disable)(struct omap_display *display);
++	DSSDBG("venc_display_resume\n");
 +
-+	int (*suspend)(struct omap_display *display);
-+	int (*resume)(struct omap_display *display);
++	mutex_lock(&venc.venc_lock);
 +
-+	int (*check_timings)(struct omap_display *display,
-+			struct omap_video_timings *timings);
-+	void (*set_timings)(struct omap_display *display,
-+			struct omap_video_timings *timings);
-+	void (*get_timings)(struct omap_display *display,
-+			struct omap_video_timings *timings);
-+	int (*update)(struct omap_display *display,
-+			       int x, int y, int w, int h);
-+	int (*sync)(struct omap_display *display);
++	if (display->state != OMAP_DSS_DISPLAY_SUSPENDED) {
++		r = -EINVAL;
++		goto err;
++	}
 +
-+	int (*set_update_mode)(struct omap_display *display,
-+			enum omap_dss_update_mode);
-+	enum omap_dss_update_mode (*get_update_mode)
-+		(struct omap_display *display);
++	venc_power_on(display);
 +
-+	int (*enable_te)(struct omap_display *display, int enable);
-+	int (*get_te)(struct omap_display *display);
++	display->state = OMAP_DSS_DISPLAY_ACTIVE;
++err:
++	mutex_unlock(&venc.venc_lock);
 +
-+	int (*run_test)(struct omap_display *display, int test);
-+};
++	return r;
++}
 +
-+int omap_dss_get_num_displays(void);
-+struct omap_display *omap_dss_get_display(int no);
-+void omap_dss_put_display(struct omap_display *display);
++static void venc_get_timings(struct omap_display *display,
++			struct omap_video_timings *timings)
++{
++	*timings = venc_panel.timings;
++}
 +
-+void omap_dss_register_ctrl(struct omap_ctrl *ctrl);
-+void omap_dss_unregister_ctrl(struct omap_ctrl *ctrl);
++static void venc_set_timings(struct omap_display *display,
++			struct omap_video_timings *timings)
++{
++	DSSDBG("venc_set_timings\n");
++	display->panel->timings = *timings;
++	if (display->state == OMAP_DSS_DISPLAY_ACTIVE) {
++		/* turn the venc off and on to get new timings to use */
++		venc_disable_display(display);
++		venc_enable_display(display);
++	}
++}
 +
-+void omap_dss_register_panel(struct omap_panel *panel);
-+void omap_dss_unregister_panel(struct omap_panel *panel);
++static int venc_check_timings(struct omap_display *display,
++			struct omap_video_timings *timings)
++{
++	DSSDBG("venc_check_timings\n");
 +
-+int omap_dss_get_num_overlay_managers(void);
-+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
++	if (memcmp(&omap_dss_pal_timings, timings, sizeof(*timings)) == 0)
++		return 0;
 +
-+int omap_dss_get_num_overlays(void);
-+struct omap_overlay *omap_dss_get_overlay(int num);
++	if (memcmp(&omap_dss_ntsc_timings, timings, sizeof(*timings)) == 0)
++		return 0;
 +
-+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
-+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
-+int omap_dispc_unregister_isr(omap_dispc_isr_t isr);
++	return -EINVAL;
++}
 +
-+#endif
++void venc_init_display(struct omap_display *display)
++{
++	display->panel = &venc_panel;
++	display->enable = venc_enable_display;
++	display->disable = venc_disable_display;
++	display->suspend = venc_display_suspend;
++	display->resume = venc_display_resume;
++	display->get_timings = venc_get_timings;
++	display->set_timings = venc_set_timings;
++	display->check_timings = venc_check_timings;
++}
 -- 
-1.5.6.3
+1.5.6.5
 
diff --git a/recipes/linux/linux-omap-pm/dss2/0004-DSS2-OMAP-framebuffer-driver.patch b/recipes/linux/linux-omap-pm/dss2/0004-DSS2-OMAP-framebuffer-driver.patch
new file mode 100644
index 0000000000..09afa7e5be
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0004-DSS2-OMAP-framebuffer-driver.patch
@@ -0,0 +1,3403 @@
+From db9314f01a207e256d545244d3d00dc4ce535280 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 10:25:48 +0300
+Subject: [PATCH] DSS2: OMAP framebuffer driver
+
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+---
+ arch/arm/plat-omap/fb.c                   |   28 +
+ drivers/video/omap/Kconfig                |    5 +-
+ drivers/video/omap2/omapfb/Kconfig        |   35 +
+ drivers/video/omap2/omapfb/Makefile       |    2 +
+ drivers/video/omap2/omapfb/omapfb-ioctl.c |  656 ++++++++++
+ drivers/video/omap2/omapfb/omapfb-main.c  | 2010 +++++++++++++++++++++++++++++
+ drivers/video/omap2/omapfb/omapfb-sysfs.c |  371 ++++++
+ drivers/video/omap2/omapfb/omapfb.h       |  153 +++
+ include/linux/omapfb.h                    |   20 +
+ 9 files changed, 3278 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/video/omap2/omapfb/Kconfig
+ create mode 100644 drivers/video/omap2/omapfb/Makefile
+ create mode 100644 drivers/video/omap2/omapfb/omapfb-ioctl.c
+ create mode 100644 drivers/video/omap2/omapfb/omapfb-main.c
+ create mode 100644 drivers/video/omap2/omapfb/omapfb-sysfs.c
+ create mode 100644 drivers/video/omap2/omapfb/omapfb.h
+
+diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
+index 40615a6..1dc3415 100644
+--- a/arch/arm/plat-omap/fb.c
++++ b/arch/arm/plat-omap/fb.c
+@@ -327,6 +327,34 @@ static inline int omap_init_fb(void)
+ 
+ arch_initcall(omap_init_fb);
+ 
++#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
++
++static u64 omap_fb_dma_mask = ~(u32)0;
++static struct omapfb_platform_data omapfb_config;
++
++static struct platform_device omap_fb_device = {
++	.name		= "omapfb",
++	.id		= -1,
++	.dev = {
++		.dma_mask		= &omap_fb_dma_mask,
++		.coherent_dma_mask	= ~(u32)0,
++		.platform_data		= &omapfb_config,
++	},
++	.num_resources = 0,
++};
++
++void omapfb_set_platform_data(struct omapfb_platform_data *data)
++{
++	omapfb_config = *data;
++}
++
++static inline int omap_init_fb(void)
++{
++	return platform_device_register(&omap_fb_device);
++}
++
++arch_initcall(omap_init_fb);
++
+ #else
+ 
+ void omapfb_reserve_sdram(void) {}
+diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
+index c355b59..a1c10de 100644
+--- a/drivers/video/omap/Kconfig
++++ b/drivers/video/omap/Kconfig
+@@ -1,6 +1,7 @@
+ config FB_OMAP
+ 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
+-	depends on FB && ARCH_OMAP
++	depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
++
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+@@ -72,7 +73,7 @@ config FB_OMAP_LCD_MIPID
+ 
+ config FB_OMAP_BOOTLOADER_INIT
+ 	bool "Check bootloader initialization"
+-	depends on FB_OMAP
++	depends on FB_OMAP || FB_OMAP2
+ 	help
+ 	  Say Y here if you want to enable checking if the bootloader has
+ 	  already initialized the display controller. In this case the
+diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/omap2/omapfb/Kconfig
+new file mode 100644
+index 0000000..4f66033
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/Kconfig
+@@ -0,0 +1,35 @@
++menuconfig FB_OMAP2
++        tristate "OMAP2/3 frame buffer support (EXPERIMENTAL)"
++        depends on FB && OMAP2_DSS
++
++        select FB_CFB_FILLRECT
++        select FB_CFB_COPYAREA
++        select FB_CFB_IMAGEBLIT
++        help
++          Frame buffer driver for OMAP2/3 based boards.
++
++config FB_OMAP2_DEBUG_SUPPORT
++	bool "Debug support for OMAP2/3 FB"
++	default y
++	depends on FB_OMAP2
++	help
++	  Support for debug output. You have to enable the actual printing
++	  with debug module parameter.
++
++config FB_OMAP2_FORCE_AUTO_UPDATE
++	bool "Force main display to automatic update mode"
++	depends on FB_OMAP2
++	help
++	  Forces main display to automatic update mode (if possible),
++	  and also enables tearsync (if possible). By default
++	  displays that support manual update are started in manual
++	  update mode.
++
++config FB_OMAP2_NUM_FBS
++	int "Number of framebuffers"
++	range 1 10
++	default 3
++	depends on FB_OMAP2
++	help
++	  Select the number of framebuffers created. OMAP2/3 has 3 overlays
++	  so normally this would be 3.
+diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/omap2/omapfb/Makefile
+new file mode 100644
+index 0000000..51c2e00
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/Makefile
+@@ -0,0 +1,2 @@
++obj-$(CONFIG_FB_OMAP2) += omapfb.o
++omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
+diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
+new file mode 100644
+index 0000000..7f18d2a
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
+@@ -0,0 +1,656 @@
++/*
++ * linux/drivers/video/omap2/omapfb-ioctl.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/fb.h>
++#include <linux/device.h>
++#include <linux/uaccess.h>
++#include <linux/platform_device.h>
++#include <linux/mm.h>
++#include <linux/omapfb.h>
++#include <linux/vmalloc.h>
++
++#include <mach/display.h>
++#include <mach/vrfb.h>
++
++#include "omapfb.h"
++
++static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++	struct omap_overlay *ovl;
++	struct omap_overlay_info info;
++	int r = 0;
++
++	DBG("omapfb_setup_plane\n");
++
++	omapfb_lock(fbdev);
++
++	if (ofbi->num_overlays != 1) {
++		r = -EINVAL;
++		goto out;
++	}
++
++	/* XXX uses only the first overlay */
++	ovl = ofbi->overlays[0];
++
++	if (pi->enabled && !ofbi->region.size) {
++		/*
++		 * This plane's memory was freed, can't enable it
++		 * until it's reallocated.
++		 */
++		r = -EINVAL;
++		goto out;
++	}
++
++	ovl->get_overlay_info(ovl, &info);
++
++	info.pos_x = pi->pos_x;
++	info.pos_y = pi->pos_y;
++	info.out_width = pi->out_width;
++	info.out_height = pi->out_height;
++	info.enabled = pi->enabled;
++
++	r = ovl->set_overlay_info(ovl, &info);
++	if (r)
++		goto out;
++
++	if (ovl->manager) {
++		r = ovl->manager->apply(ovl->manager);
++		if (r)
++			goto out;
++	}
++
++	if (display) {
++		u16 w, h;
++
++		if (display->sync)
++			display->sync(display);
++
++		display->get_resolution(display, &w, &h);
++
++		if (display->update)
++			display->update(display, 0, 0, w, h);
++	}
++
++out:
++	omapfb_unlock(fbdev);
++	if (r)
++		dev_err(fbdev->dev, "setup_plane failed\n");
++	return r;
++}
++
++static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++
++	omapfb_lock(fbdev);
++
++	if (ofbi->num_overlays != 1) {
++		memset(pi, 0, sizeof(*pi));
++	} else {
++		struct omap_overlay_info *ovli;
++		struct omap_overlay *ovl;
++
++		ovl = ofbi->overlays[0];
++		ovli = &ovl->info;
++
++		pi->pos_x = ovli->pos_x;
++		pi->pos_y = ovli->pos_y;
++		pi->enabled = ovli->enabled;
++		pi->channel_out = 0; /* xxx */
++		pi->mirror = 0;
++		pi->out_width = ovli->out_width;
++		pi->out_height = ovli->out_height;
++	}
++
++	omapfb_unlock(fbdev);
++
++	return 0;
++}
++
++static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omapfb2_mem_region *rg;
++	int r, i;
++	size_t size;
++
++	if (mi->type > OMAPFB_MEMTYPE_MAX)
++		return -EINVAL;
++
++	size = PAGE_ALIGN(mi->size);
++
++	rg = &ofbi->region;
++
++	omapfb_lock(fbdev);
++
++	for (i = 0; i < ofbi->num_overlays; i++) {
++		if (ofbi->overlays[i]->info.enabled) {
++			r = -EBUSY;
++			goto out;
++		}
++	}
++
++	if (rg->size != size || rg->type != mi->type) {
++		r = omapfb_realloc_fbmem(fbi, size, mi->type);
++		if (r) {
++			dev_err(fbdev->dev, "realloc fbmem failed\n");
++			goto out;
++		}
++	}
++
++	r = 0;
++out:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omapfb2_mem_region *rg;
++
++	rg = &ofbi->region;
++	memset(mi, 0, sizeof(*mi));
++
++	omapfb_lock(fbdev);
++	mi->size = rg->size;
++	mi->type = rg->type;
++	omapfb_unlock(fbdev);
++
++	return 0;
++}
++
++static int omapfb_update_window(struct fb_info *fbi,
++		u32 x, u32 y, u32 w, u32 h)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++	u16 dw, dh;
++
++	if (!display)
++		return 0;
++
++	if (w == 0 || h == 0)
++		return 0;
++
++	display->get_resolution(display, &dw, &dh);
++
++	if (x + w > dw || y + h > dh)
++		return -EINVAL;
++
++	omapfb_lock(fbdev);
++	display->update(display, x, y, w, h);
++	omapfb_unlock(fbdev);
++
++	return 0;
++}
++
++static int omapfb_set_update_mode(struct fb_info *fbi,
++				   enum omapfb_update_mode mode)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++	enum omap_dss_update_mode um;
++	int r;
++
++	if (!display || !display->set_update_mode)
++		return -EINVAL;
++
++	switch (mode) {
++	case OMAPFB_UPDATE_DISABLED:
++		um = OMAP_DSS_UPDATE_DISABLED;
++		break;
++
++	case OMAPFB_AUTO_UPDATE:
++		um = OMAP_DSS_UPDATE_AUTO;
++		break;
++
++	case OMAPFB_MANUAL_UPDATE:
++		um = OMAP_DSS_UPDATE_MANUAL;
++		break;
++
++	default:
++		return -EINVAL;
++	}
++
++	omapfb_lock(fbdev);
++	r = display->set_update_mode(display, um);
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static int omapfb_get_update_mode(struct fb_info *fbi,
++		enum omapfb_update_mode *mode)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++	enum omap_dss_update_mode m;
++
++	if (!display || !display->get_update_mode)
++		return -EINVAL;
++
++	omapfb_lock(fbdev);
++	m = display->get_update_mode(display);
++	omapfb_unlock(fbdev);
++
++	switch (m) {
++	case OMAP_DSS_UPDATE_DISABLED:
++		*mode = OMAPFB_UPDATE_DISABLED;
++		break;
++	case OMAP_DSS_UPDATE_AUTO:
++		*mode = OMAPFB_AUTO_UPDATE;
++		break;
++	case OMAP_DSS_UPDATE_MANUAL:
++		*mode = OMAPFB_MANUAL_UPDATE;
++		break;
++	default:
++		BUG();
++	}
++
++	return 0;
++}
++
++/* XXX this color key handling is a hack... */
++static struct omapfb_color_key omapfb_color_keys[2];
++
++static int _omapfb_set_color_key(struct omap_overlay_manager *mgr,
++		struct omapfb_color_key *ck)
++{
++	enum omap_dss_color_key_type kt;
++
++	if(!mgr->set_default_color || !mgr->set_trans_key ||
++			!mgr->enable_trans_key)
++		return 0;
++
++	if (ck->key_type == OMAPFB_COLOR_KEY_DISABLED) {
++		mgr->enable_trans_key(mgr, 0);
++		omapfb_color_keys[mgr->id] = *ck;
++		return 0;
++	}
++
++	switch(ck->key_type) {
++	case OMAPFB_COLOR_KEY_GFX_DST:
++		kt = OMAP_DSS_COLOR_KEY_GFX_DST;
++		break;
++	case OMAPFB_COLOR_KEY_VID_SRC:
++		kt = OMAP_DSS_COLOR_KEY_VID_SRC;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	mgr->set_default_color(mgr, ck->background);
++	mgr->set_trans_key(mgr, kt, ck->trans_key);
++	mgr->enable_trans_key(mgr, 1);
++
++	omapfb_color_keys[mgr->id] = *ck;
++
++	return 0;
++}
++
++static int omapfb_set_color_key(struct fb_info *fbi,
++		struct omapfb_color_key *ck)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	int r;
++	int i;
++	struct omap_overlay_manager *mgr = NULL;
++
++	omapfb_lock(fbdev);
++
++	for (i = 0; i < ofbi->num_overlays; i++) {
++		if (ofbi->overlays[i]->manager) {
++			mgr = ofbi->overlays[i]->manager;
++			break;
++		}
++	}
++
++	if (!mgr) {
++		r = -EINVAL;
++		goto err;
++	}
++
++	if(!mgr->set_default_color || !mgr->set_trans_key ||
++			!mgr->enable_trans_key) {
++		r = -ENODEV;
++		goto err;
++	}
++
++	r = _omapfb_set_color_key(mgr, ck);
++err:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static int omapfb_get_color_key(struct fb_info *fbi,
++		struct omapfb_color_key *ck)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_overlay_manager *mgr = NULL;
++	int r = 0;
++	int i;
++
++	omapfb_lock(fbdev);
++
++	for (i = 0; i < ofbi->num_overlays; i++) {
++		if (ofbi->overlays[i]->manager) {
++			mgr = ofbi->overlays[i]->manager;
++			break;
++		}
++	}
++
++	if (!mgr) {
++		r = -EINVAL;
++		goto err;
++	}
++
++	if(!mgr->set_default_color || !mgr->set_trans_key ||
++			!mgr->enable_trans_key) {
++		r = -ENODEV;
++		goto err;
++	}
++
++	*ck = omapfb_color_keys[mgr->id];
++err:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static int omapfb_memory_read(struct fb_info *fbi,
++		struct omapfb_memory_read *mr)
++{
++	struct omap_display *display = fb2display(fbi);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	void *buf;
++	int r;
++
++	if (!display || !display->memory_read)
++		return -ENOENT;
++
++	if (!access_ok(VERIFY_WRITE, mr->buffer, mr->buffer_size))
++		return -EFAULT;
++
++	if (mr->w * mr->h * 3 > mr->buffer_size)
++		return -EINVAL;
++
++	buf = vmalloc(mr->buffer_size);
++	if (!buf) {
++		DBG("vmalloc failed\n");
++		return -ENOMEM;
++	}
++
++	omapfb_lock(fbdev);
++
++	r = display->memory_read(display, buf, mr->buffer_size,
++			mr->x, mr->y, mr->w, mr->h);
++
++	if (r > 0) {
++		if (copy_to_user(mr->buffer, buf, mr->buffer_size))
++			r = -EFAULT;
++	}
++
++	vfree(buf);
++
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++
++	union {
++		struct omapfb_update_window_old	uwnd_o;
++		struct omapfb_update_window	uwnd;
++		struct omapfb_plane_info	plane_info;
++		struct omapfb_caps		caps;
++		struct omapfb_mem_info          mem_info;
++		struct omapfb_color_key		color_key;
++		enum omapfb_update_mode		update_mode;
++		int test_num;
++		struct omapfb_memory_read	memory_read;
++	} p;
++
++	int r = 0;
++
++	switch (cmd) {
++	case OMAPFB_SYNC_GFX:
++		DBG("ioctl SYNC_GFX\n");
++		if (!display || !display->sync) {
++			/* DSS1 never returns an error here, so we neither */
++			/*r = -EINVAL;*/
++			break;
++		}
++
++		omapfb_lock(fbdev);
++		r = display->sync(display);
++		omapfb_unlock(fbdev);
++		break;
++
++	case OMAPFB_UPDATE_WINDOW_OLD:
++		DBG("ioctl UPDATE_WINDOW_OLD\n");
++		if (!display || !display->update) {
++			r = -EINVAL;
++			break;
++		}
++
++		if (copy_from_user(&p.uwnd_o,
++					(void __user *)arg,
++					sizeof(p.uwnd_o))) {
++			r = -EFAULT;
++			break;
++		}
++
++		r = omapfb_update_window(fbi, p.uwnd_o.x, p.uwnd_o.y,
++				p.uwnd_o.width, p.uwnd_o.height);
++		break;
++
++	case OMAPFB_UPDATE_WINDOW:
++		DBG("ioctl UPDATE_WINDOW\n");
++		if (!display || !display->update) {
++			r = -EINVAL;
++			break;
++		}
++
++		if (copy_from_user(&p.uwnd, (void __user *)arg,
++					sizeof(p.uwnd))) {
++			r = -EFAULT;
++			break;
++		}
++
++		r = omapfb_update_window(fbi, p.uwnd.x, p.uwnd.y,
++				p.uwnd.width, p.uwnd.height);
++		break;
++
++	case OMAPFB_SETUP_PLANE:
++		DBG("ioctl SETUP_PLANE\n");
++		if (copy_from_user(&p.plane_info, (void __user *)arg,
++					sizeof(p.plane_info)))
++			r = -EFAULT;
++		else
++			r = omapfb_setup_plane(fbi, &p.plane_info);
++		break;
++
++	case OMAPFB_QUERY_PLANE:
++		DBG("ioctl QUERY_PLANE\n");
++		r = omapfb_query_plane(fbi, &p.plane_info);
++		if (r < 0)
++			break;
++		if (copy_to_user((void __user *)arg, &p.plane_info,
++					sizeof(p.plane_info)))
++			r = -EFAULT;
++		break;
++
++	case OMAPFB_SETUP_MEM:
++		DBG("ioctl SETUP_MEM\n");
++		if (copy_from_user(&p.mem_info, (void __user *)arg,
++					sizeof(p.mem_info)))
++			r = -EFAULT;
++		else
++			r = omapfb_setup_mem(fbi, &p.mem_info);
++		break;
++
++	case OMAPFB_QUERY_MEM:
++		DBG("ioctl QUERY_MEM\n");
++		r = omapfb_query_mem(fbi, &p.mem_info);
++		if (r < 0)
++			break;
++		if (copy_to_user((void __user *)arg, &p.mem_info,
++					sizeof(p.mem_info)))
++			r = -EFAULT;
++		break;
++
++	case OMAPFB_GET_CAPS:
++		DBG("ioctl GET_CAPS\n");
++		if (!display) {
++			r = -EINVAL;
++			break;
++		}
++
++		p.caps.ctrl = display->caps;
++
++		if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps)))
++			r = -EFAULT;
++		break;
++
++	case OMAPFB_SET_UPDATE_MODE:
++		DBG("ioctl SET_UPDATE_MODE\n");
++		if (get_user(p.update_mode, (int __user *)arg))
++			r = -EFAULT;
++		else
++			r = omapfb_set_update_mode(fbi, p.update_mode);
++		break;
++
++	case OMAPFB_GET_UPDATE_MODE:
++		DBG("ioctl GET_UPDATE_MODE\n");
++		r = omapfb_get_update_mode(fbi, &p.update_mode);
++		if (r)
++			break;
++		if (put_user(p.update_mode,
++					(enum omapfb_update_mode __user *)arg))
++			r = -EFAULT;
++		break;
++
++	case OMAPFB_SET_COLOR_KEY:
++		DBG("ioctl SET_COLOR_KEY\n");
++		if (copy_from_user(&p.color_key, (void __user *)arg,
++				   sizeof(p.color_key)))
++			r = -EFAULT;
++		else
++			r = omapfb_set_color_key(fbi, &p.color_key);
++		break;
++
++	case OMAPFB_GET_COLOR_KEY:
++		DBG("ioctl GET_COLOR_KEY\n");
++		if ((r = omapfb_get_color_key(fbi, &p.color_key)) < 0)
++			break;
++		if (copy_to_user((void __user *)arg, &p.color_key,
++				 sizeof(p.color_key)))
++			r = -EFAULT;
++		break;
++
++	case OMAPFB_WAITFORVSYNC:
++		DBG("ioctl WAITFORVSYNC\n");
++		if (!display) {
++			r = -EINVAL;
++			break;
++		}
++
++		r = display->wait_vsync(display);
++		break;
++
++	/* LCD and CTRL tests do the same thing for backward
++	 * compatibility */
++	case OMAPFB_LCD_TEST:
++		DBG("ioctl LCD_TEST\n");
++		if (get_user(p.test_num, (int __user *)arg)) {
++			r = -EFAULT;
++			break;
++		}
++		if (!display || !display->run_test) {
++			r = -EINVAL;
++			break;
++		}
++
++		r = display->run_test(display, p.test_num);
++
++		break;
++
++	case OMAPFB_CTRL_TEST:
++		DBG("ioctl CTRL_TEST\n");
++		if (get_user(p.test_num, (int __user *)arg)) {
++			r = -EFAULT;
++			break;
++		}
++		if (!display || !display->run_test) {
++			r = -EINVAL;
++			break;
++		}
++
++		r = display->run_test(display, p.test_num);
++
++		break;
++
++	case OMAPFB_MEMORY_READ:
++		DBG("ioctl MEMORY_READ\n");
++
++		if (copy_from_user(&p.memory_read, (void __user *)arg,
++					sizeof(p.memory_read))) {
++			r = -EFAULT;
++			break;
++		}
++
++		r = omapfb_memory_read(fbi, &p.memory_read);
++
++		break;
++
++	default:
++		dev_err(fbdev->dev, "Unknown ioctl 0x%x\n", cmd);
++		r = -EINVAL;
++	}
++
++	if (r < 0)
++		DBG("ioctl failed: %d\n", r);
++
++	return r;
++}
++
++
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+new file mode 100644
+index 0000000..852abe5
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -0,0 +1,2010 @@
++/*
++ * linux/drivers/video/omap2/omapfb-main.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/dma-mapping.h>
++#include <linux/vmalloc.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/omapfb.h>
++
++#include <mach/display.h>
++#include <mach/vram.h>
++#include <mach/vrfb.h>
++
++#include "omapfb.h"
++
++#define MODULE_NAME     "omapfb"
++
++static char *def_mode;
++static char *def_vram;
++static int def_vrfb;
++static int def_rotate;
++static int def_mirror;
++
++#ifdef DEBUG
++unsigned int omapfb_debug;
++module_param_named(debug, omapfb_debug, bool, 0644);
++static unsigned int omapfb_test_pattern;
++module_param_named(test, omapfb_test_pattern, bool, 0644);
++#endif
++
++#ifdef DEBUG
++static void draw_pixel(struct fb_info *fbi, int x, int y, unsigned color)
++{
++	struct fb_var_screeninfo *var = &fbi->var;
++	struct fb_fix_screeninfo *fix = &fbi->fix;
++	void __iomem *addr = fbi->screen_base;
++	const unsigned bytespp = var->bits_per_pixel >> 3;
++	const unsigned line_len = fix->line_length / bytespp;
++
++	int r = (color >> 16) & 0xff;
++	int g = (color >> 8) & 0xff;
++	int b = (color >> 0) & 0xff;
++
++	if (var->bits_per_pixel == 16) {
++		u16 __iomem *p = (u16 __iomem *)addr;
++		p += y * line_len + x;
++
++		r = r * 32 / 256;
++		g = g * 64 / 256;
++		b = b * 32 / 256;
++
++		__raw_writew((r << 11) | (g << 5) | (b << 0), p);
++	} else if (var->bits_per_pixel == 24) {
++		u8 __iomem *p = (u8 __iomem *)addr;
++		p += (y * line_len + x) * 3;
++
++		__raw_writeb(b, p + 0);
++		__raw_writeb(g, p + 1);
++		__raw_writeb(r, p + 2);
++	} else if (var->bits_per_pixel == 32) {
++		u32 __iomem *p = (u32 __iomem *)addr;
++		p += y * line_len + x;
++		__raw_writel(color, p);
++	}
++}
++
++static void fill_fb(struct fb_info *fbi)
++{
++	struct fb_var_screeninfo *var = &fbi->var;
++	const short w = var->xres_virtual;
++	const short h = var->yres_virtual;
++	void __iomem *addr = fbi->screen_base;
++	int y, x;
++
++	if (!addr)
++		return;
++
++	DBG("fill_fb %dx%d, line_len %d bytes\n", w, h, fbi->fix.line_length);
++
++	for (y = 0; y < h; y++) {
++		for (x = 0; x < w; x++) {
++			if (x < 20 && y < 20)
++				draw_pixel(fbi, x, y, 0xffffff);
++			else if (x < 20 && (y > 20 && y < h - 20))
++				draw_pixel(fbi, x, y, 0xff);
++			else if (y < 20 && (x > 20 && x < w - 20))
++				draw_pixel(fbi, x, y, 0xff00);
++			else if (x > w - 20 && (y > 20 && y < h - 20))
++				draw_pixel(fbi, x, y, 0xff0000);
++			else if (y > h - 20 && (x > 20 && x < w - 20))
++				draw_pixel(fbi, x, y, 0xffff00);
++			else if (x == 20 || x == w - 20 ||
++					y == 20 || y == h - 20)
++				draw_pixel(fbi, x, y, 0xffffff);
++			else if (x == y || w - x == h - y)
++				draw_pixel(fbi, x, y, 0xff00ff);
++			else if (w - x == y || x == h - y)
++				draw_pixel(fbi, x, y, 0x00ffff);
++			else if (x > 20 && y > 20 && x < w - 20 && y < h - 20) {
++				int t = x * 3 / w;
++				unsigned r = 0, g = 0, b = 0;
++				unsigned c;
++				if (var->bits_per_pixel == 16) {
++					if (t == 0)
++						b = (y % 32) * 256 / 32;
++					else if (t == 1)
++						g = (y % 64) * 256 / 64;
++					else if (t == 2)
++						r = (y % 32) * 256 / 32;
++				} else {
++					if (t == 0)
++						b = (y % 256);
++					else if (t == 1)
++						g = (y % 256);
++					else if (t == 2)
++						r = (y % 256);
++				}
++				c = (r << 16) | (g << 8) | (b << 0);
++				draw_pixel(fbi, x, y, c);
++			} else {
++				draw_pixel(fbi, x, y, 0);
++			}
++		}
++	}
++}
++#endif
++
++static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
++{
++	struct vrfb *vrfb = &ofbi->region.vrfb;
++	unsigned offset;
++
++	switch (rot) {
++	case FB_ROTATE_UR:
++		offset = 0;
++		break;
++	case FB_ROTATE_CW:
++		offset = vrfb->yoffset;
++		break;
++	case FB_ROTATE_UD:
++		offset = vrfb->yoffset * OMAP_VRFB_LINE_LEN + vrfb->xoffset;
++		break;
++	case FB_ROTATE_CCW:
++		offset = vrfb->xoffset * OMAP_VRFB_LINE_LEN;
++		break;
++	default:
++		BUG();
++	}
++
++	offset *= vrfb->bytespp;
++
++	return offset;
++}
++
++static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi)
++{
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++		unsigned offset;
++		int rot;
++
++		rot = ofbi->rotation;
++
++		offset = omapfb_get_vrfb_offset(ofbi, rot);
++
++		return ofbi->region.vrfb.paddr[rot] + offset;
++	} else {
++		return ofbi->region.paddr;
++	}
++}
++
++u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
++{
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++		return ofbi->region.vrfb.paddr[0];
++	else
++		return ofbi->region.paddr;
++}
++
++void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
++{
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++		return ofbi->region.vrfb.vaddr[0];
++	else
++		return ofbi->region.vaddr;
++}
++
++static struct omapfb_colormode omapfb_colormodes[] = {
++	{
++		.dssmode = OMAP_DSS_COLOR_UYVY,
++		.bits_per_pixel = 16,
++		.nonstd = OMAPFB_COLOR_YUV422,
++	}, {
++		.dssmode = OMAP_DSS_COLOR_YUV2,
++		.bits_per_pixel = 16,
++		.nonstd = OMAPFB_COLOR_YUY422,
++	}, {
++		.dssmode = OMAP_DSS_COLOR_ARGB16,
++		.bits_per_pixel = 16,
++		.red	= { .length = 4, .offset = 8, .msb_right = 0 },
++		.green	= { .length = 4, .offset = 4, .msb_right = 0 },
++		.blue	= { .length = 4, .offset = 0, .msb_right = 0 },
++		.transp	= { .length = 4, .offset = 12, .msb_right = 0 },
++	}, {
++		.dssmode = OMAP_DSS_COLOR_RGB16,
++		.bits_per_pixel = 16,
++		.red	= { .length = 5, .offset = 11, .msb_right = 0 },
++		.green	= { .length = 6, .offset = 5, .msb_right = 0 },
++		.blue	= { .length = 5, .offset = 0, .msb_right = 0 },
++		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
++	}, {
++		.dssmode = OMAP_DSS_COLOR_RGB24P,
++		.bits_per_pixel = 24,
++		.red	= { .length = 8, .offset = 16, .msb_right = 0 },
++		.green	= { .length = 8, .offset = 8, .msb_right = 0 },
++		.blue	= { .length = 8, .offset = 0, .msb_right = 0 },
++		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
++	}, {
++		.dssmode = OMAP_DSS_COLOR_RGB24U,
++		.bits_per_pixel = 32,
++		.red	= { .length = 8, .offset = 16, .msb_right = 0 },
++		.green	= { .length = 8, .offset = 8, .msb_right = 0 },
++		.blue	= { .length = 8, .offset = 0, .msb_right = 0 },
++		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
++	}, {
++		.dssmode = OMAP_DSS_COLOR_ARGB32,
++		.bits_per_pixel = 32,
++		.red	= { .length = 8, .offset = 16, .msb_right = 0 },
++		.green	= { .length = 8, .offset = 8, .msb_right = 0 },
++		.blue	= { .length = 8, .offset = 0, .msb_right = 0 },
++		.transp	= { .length = 8, .offset = 24, .msb_right = 0 },
++	}, {
++		.dssmode = OMAP_DSS_COLOR_RGBA32,
++		.bits_per_pixel = 32,
++		.red	= { .length = 8, .offset = 24, .msb_right = 0 },
++		.green	= { .length = 8, .offset = 16, .msb_right = 0 },
++		.blue	= { .length = 8, .offset = 8, .msb_right = 0 },
++		.transp	= { .length = 8, .offset = 0, .msb_right = 0 },
++	}, {
++		.dssmode = OMAP_DSS_COLOR_RGBX32,
++		.bits_per_pixel = 32,
++		.red	= { .length = 8, .offset = 24, .msb_right = 0 },
++		.green	= { .length = 8, .offset = 16, .msb_right = 0 },
++		.blue	= { .length = 8, .offset = 8, .msb_right = 0 },
++		.transp	= { .length = 0, .offset = 0, .msb_right = 0 },
++	},
++};
++
++static bool cmp_var_to_colormode(struct fb_var_screeninfo *var,
++		struct omapfb_colormode *color)
++{
++	bool cmp_component(struct fb_bitfield *f1, struct fb_bitfield *f2)
++	{
++		return f1->length == f2->length &&
++			f1->offset == f2->offset &&
++			f1->msb_right == f2->msb_right;
++	}
++
++	if (var->bits_per_pixel == 0 ||
++			var->red.length == 0 ||
++			var->blue.length == 0 ||
++			var->green.length == 0)
++		return 0;
++
++	return var->bits_per_pixel == color->bits_per_pixel &&
++		cmp_component(&var->red, &color->red) &&
++		cmp_component(&var->green, &color->green) &&
++		cmp_component(&var->blue, &color->blue) &&
++		cmp_component(&var->transp, &color->transp);
++}
++
++static void assign_colormode_to_var(struct fb_var_screeninfo *var,
++		struct omapfb_colormode *color)
++{
++	var->bits_per_pixel = color->bits_per_pixel;
++	var->nonstd = color->nonstd;
++	var->red = color->red;
++	var->green = color->green;
++	var->blue = color->blue;
++	var->transp = color->transp;
++}
++
++static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var)
++{
++	enum omap_color_mode dssmode;
++	int i;
++
++	/* first match with nonstd field */
++	if (var->nonstd) {
++		for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++			struct omapfb_colormode *mode = &omapfb_colormodes[i];
++			if (var->nonstd == mode->nonstd) {
++				assign_colormode_to_var(var, mode);
++				return mode->dssmode;
++			}
++		}
++
++		return -EINVAL;
++	}
++
++	/* then try exact match of bpp and colors */
++	for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++		struct omapfb_colormode *mode = &omapfb_colormodes[i];
++		if (cmp_var_to_colormode(var, mode)) {
++			assign_colormode_to_var(var, mode);
++			return mode->dssmode;
++		}
++	}
++
++	/* match with bpp if user has not filled color fields
++	 * properly */
++	switch (var->bits_per_pixel) {
++	case 1:
++		dssmode = OMAP_DSS_COLOR_CLUT1;
++		break;
++	case 2:
++		dssmode = OMAP_DSS_COLOR_CLUT2;
++		break;
++	case 4:
++		dssmode = OMAP_DSS_COLOR_CLUT4;
++		break;
++	case 8:
++		dssmode = OMAP_DSS_COLOR_CLUT8;
++		break;
++	case 12:
++		dssmode = OMAP_DSS_COLOR_RGB12U;
++		break;
++	case 16:
++		dssmode = OMAP_DSS_COLOR_RGB16;
++		break;
++	case 24:
++		dssmode = OMAP_DSS_COLOR_RGB24P;
++		break;
++	case 32:
++		dssmode = OMAP_DSS_COLOR_RGB24U;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++		struct omapfb_colormode *mode = &omapfb_colormodes[i];
++		if (dssmode == mode->dssmode) {
++			assign_colormode_to_var(var, mode);
++			return mode->dssmode;
++		}
++	}
++
++	return -EINVAL;
++}
++
++void set_fb_fix(struct fb_info *fbi)
++{
++	struct fb_fix_screeninfo *fix = &fbi->fix;
++	struct fb_var_screeninfo *var = &fbi->var;
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_mem_region *rg = &ofbi->region;
++
++	DBG("set_fb_fix\n");
++
++	/* used by open/write in fbmem.c */
++	fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi);
++
++	/* used by mmap in fbmem.c */
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++		fix->line_length =
++			(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3;
++	else
++		fix->line_length =
++			(var->xres_virtual * var->bits_per_pixel) >> 3;
++	fix->smem_start = omapfb_get_region_paddr(ofbi);
++	fix->smem_len = rg->size;
++
++	fix->type = FB_TYPE_PACKED_PIXELS;
++
++	if (var->nonstd)
++		fix->visual = FB_VISUAL_PSEUDOCOLOR;
++	else {
++		switch (var->bits_per_pixel) {
++		case 32:
++		case 24:
++		case 16:
++		case 12:
++			fix->visual = FB_VISUAL_TRUECOLOR;
++			/* 12bpp is stored in 16 bits */
++			break;
++		case 1:
++		case 2:
++		case 4:
++		case 8:
++			fix->visual = FB_VISUAL_PSEUDOCOLOR;
++			break;
++		}
++	}
++
++	fix->accel = FB_ACCEL_NONE;
++
++	fix->xpanstep = 1;
++	fix->ypanstep = 1;
++
++	if (rg->size) {
++		if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++			omap_vrfb_setup(&rg->vrfb, rg->paddr,
++					var->xres_virtual, var->yres_virtual,
++					var->bits_per_pixel >> 3);
++	}
++}
++
++/* check new var and possibly modify it to be ok */
++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omap_display *display = fb2display(fbi);
++	unsigned long max_frame_size;
++	unsigned long line_size;
++	int xres_min, yres_min;
++	int xres_max, yres_max;
++	enum omap_color_mode mode = 0;
++	int i;
++	int bytespp;
++
++	DBG("check_fb_var %d\n", ofbi->id);
++
++	if (ofbi->region.size == 0)
++		return 0;
++
++	mode = fb_mode_to_dss_mode(var);
++	if (mode < 0) {
++		DBG("cannot convert var to omap dss mode\n");
++		return -EINVAL;
++	}
++
++	for (i = 0; i < ofbi->num_overlays; ++i) {
++		if ((ofbi->overlays[i]->supported_modes & mode) == 0) {
++			DBG("invalid mode\n");
++			return -EINVAL;
++		}
++	}
++
++	if (var->rotate < 0 || var->rotate > 3)
++		return -EINVAL;
++
++	if (var->rotate != fbi->var.rotate) {
++		DBG("rotation changing\n");
++
++		ofbi->rotation = var->rotate;
++
++		if (abs(var->rotate - fbi->var.rotate) != 2) {
++			int tmp;
++			DBG("rotate changing 90/270 degrees. "
++					"swapping x/y res\n");
++
++			tmp = var->yres;
++			var->yres = var->xres;
++			var->xres = tmp;
++
++			tmp = var->yres_virtual;
++			var->yres_virtual = var->xres_virtual;
++			var->xres_virtual = tmp;
++		}
++	}
++
++	xres_min = OMAPFB_PLANE_XRES_MIN;
++	xres_max = 2048;
++	yres_min = OMAPFB_PLANE_YRES_MIN;
++	yres_max = 2048;
++
++	bytespp = var->bits_per_pixel >> 3;
++
++	/* XXX: some applications seem to set virtual res to 0. */
++	if (var->xres_virtual == 0)
++		var->xres_virtual = var->xres;
++
++	if (var->yres_virtual == 0)
++		var->yres_virtual = var->yres;
++
++	if (var->xres_virtual < xres_min || var->yres_virtual < yres_min)
++		return -EINVAL;
++
++	if (var->xres < xres_min)
++		var->xres = xres_min;
++	if (var->yres < yres_min)
++		var->yres = yres_min;
++	if (var->xres > xres_max)
++		var->xres = xres_max;
++	if (var->yres > yres_max)
++		var->yres = yres_max;
++
++	if (var->xres > var->xres_virtual)
++		var->xres = var->xres_virtual;
++	if (var->yres > var->yres_virtual)
++		var->yres = var->yres_virtual;
++
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++		line_size = OMAP_VRFB_LINE_LEN * bytespp;
++	else
++		line_size = var->xres_virtual * bytespp;
++
++	max_frame_size = ofbi->region.size;
++
++	DBG("max frame size %lu, line size %lu\n", max_frame_size, line_size);
++
++	if (line_size * var->yres_virtual > max_frame_size) {
++		DBG("can't fit FB into memory, reducing y\n");
++		var->yres_virtual = max_frame_size / line_size;
++
++		if (var->yres_virtual < yres_min)
++			var->yres_virtual = yres_min;
++
++		if (var->yres > var->yres_virtual)
++			var->yres = var->yres_virtual;
++	}
++
++	if (line_size * var->yres_virtual > max_frame_size) {
++		DBG("can't fit FB into memory, reducing x\n");
++		if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++			return -EINVAL;
++
++		var->xres_virtual = max_frame_size / var->yres_virtual /
++			bytespp;
++
++		if (var->xres_virtual < xres_min)
++			var->xres_virtual = xres_min;
++
++		if (var->xres > var->xres_virtual)
++			var->xres = var->xres_virtual;
++
++		line_size = var->xres_virtual * bytespp;
++	}
++
++	if (line_size * var->yres_virtual > max_frame_size) {
++		DBG("cannot fit FB to memory\n");
++		return -EINVAL;
++	}
++
++	if (var->xres + var->xoffset > var->xres_virtual)
++		var->xoffset = var->xres_virtual - var->xres;
++	if (var->yres + var->yoffset > var->yres_virtual)
++		var->yoffset = var->yres_virtual - var->yres;
++
++	DBG("xres = %d, yres = %d, vxres = %d, vyres = %d\n",
++			var->xres, var->yres,
++			var->xres_virtual, var->yres_virtual);
++
++	var->height             = -1;
++	var->width              = -1;
++	var->grayscale          = 0;
++
++	if (display && display->get_timings) {
++		struct omap_video_timings timings;
++		display->get_timings(display, &timings);
++
++		/* pixclock in ps, the rest in pixclock */
++		var->pixclock = timings.pixel_clock != 0 ?
++			KHZ2PICOS(timings.pixel_clock) :
++			0;
++		var->left_margin = timings.hfp;
++		var->right_margin = timings.hbp;
++		var->upper_margin = timings.vfp;
++		var->lower_margin = timings.vbp;
++		var->hsync_len = timings.hsw;
++		var->vsync_len = timings.vsw;
++	} else {
++		var->pixclock = 0;
++		var->left_margin = 0;
++		var->right_margin = 0;
++		var->upper_margin = 0;
++		var->lower_margin = 0;
++		var->hsync_len = 0;
++		var->vsync_len = 0;
++	}
++
++	/* TODO: get these from panel->config */
++	var->vmode              = FB_VMODE_NONINTERLACED;
++	var->sync               = 0;
++
++	return 0;
++}
++
++/*
++ * ---------------------------------------------------------------------------
++ * fbdev framework callbacks
++ * ---------------------------------------------------------------------------
++ */
++static int omapfb_open(struct fb_info *fbi, int user)
++{
++	return 0;
++}
++
++static int omapfb_release(struct fb_info *fbi, int user)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++
++	DBG("Closing fb with plane index %d\n", ofbi->id);
++
++	omapfb_lock(fbdev);
++#if 1
++	if (display && display->get_update_mode && display->update) {
++		/* XXX this update should be removed, I think. But it's
++		 * good for debugging */
++		if (display->get_update_mode(display) ==
++				OMAP_DSS_UPDATE_MANUAL) {
++			u16 w, h;
++
++			if (display->sync)
++				display->sync(display);
++
++			display->get_resolution(display, &w, &h);
++			display->update(display, 0, 0, w, h);
++		}
++	}
++#endif
++
++	if (display && display->sync)
++		display->sync(display);
++
++	omapfb_unlock(fbdev);
++
++	return 0;
++}
++
++/* setup overlay according to the fb */
++static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
++		u16 posx, u16 posy, u16 outw, u16 outh)
++{
++	int r = 0;
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct fb_var_screeninfo *var = &fbi->var;
++	struct fb_fix_screeninfo *fix = &fbi->fix;
++	enum omap_color_mode mode = 0;
++	int offset;
++	u32 data_start_p;
++	void __iomem *data_start_v;
++	struct omap_overlay_info info;
++	int xres, yres;
++	int screen_width;
++	int rot, mirror;
++
++	DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id,
++			posx, posy, outw, outh);
++
++	if (ofbi->rotation == FB_ROTATE_CW || ofbi->rotation == FB_ROTATE_CCW) {
++		xres = var->yres;
++		yres = var->xres;
++	} else {
++		xres = var->xres;
++		yres = var->yres;
++	}
++
++	offset = ((var->yoffset * var->xres_virtual +
++				var->xoffset) * var->bits_per_pixel) >> 3;
++
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++		data_start_p = omapfb_get_region_rot_paddr(ofbi);
++		data_start_v = NULL;
++	} else {
++		data_start_p = omapfb_get_region_paddr(ofbi);
++		data_start_v = omapfb_get_region_vaddr(ofbi);
++	}
++
++	data_start_p += offset;
++	data_start_v += offset;
++
++	mode = fb_mode_to_dss_mode(var);
++
++	if (mode == -EINVAL) {
++		DBG("fb_mode_to_dss_mode failed");
++		r = -EINVAL;
++		goto err;
++	}
++
++	screen_width = fix->line_length / (var->bits_per_pixel >> 3);
++
++	ovl->get_overlay_info(ovl, &info);
++
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++		rot = 0;
++		mirror = 0;
++	} else {
++		rot = ofbi->rotation;
++		mirror = ofbi->mirror;
++	}
++
++	info.paddr = data_start_p;
++	info.vaddr = data_start_v;
++	info.screen_width = screen_width;
++	info.width = xres;
++	info.height = yres;
++	info.color_mode = mode;
++	info.rotation = rot;
++	info.mirror = mirror;
++
++	info.pos_x = posx;
++	info.pos_y = posy;
++	info.out_width = outw;
++	info.out_height = outh;
++
++	r = ovl->set_overlay_info(ovl, &info);
++	if (r) {
++		DBG("ovl->setup_overlay_info failed\n");
++		goto err;
++	}
++
++	return 0;
++
++err:
++	DBG("setup_overlay failed\n");
++	return r;
++}
++
++/* apply var to the overlay */
++int omapfb_apply_changes(struct fb_info *fbi, int init)
++{
++	int r = 0;
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct fb_var_screeninfo *var = &fbi->var;
++	struct omap_overlay *ovl;
++	u16 posx, posy;
++	u16 outw, outh;
++	int i;
++
++#ifdef DEBUG
++	if (omapfb_test_pattern)
++		fill_fb(fbi);
++#endif
++
++	for (i = 0; i < ofbi->num_overlays; i++) {
++		ovl = ofbi->overlays[i];
++
++		DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
++
++		if (ofbi->region.size == 0) {
++			/* the fb is not available. disable the overlay */
++			omapfb_overlay_enable(ovl, 0);
++			if (!init && ovl->manager)
++				ovl->manager->apply(ovl->manager);
++			continue;
++		}
++
++		if (init || (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) == 0) {
++			if (ofbi->rotation == FB_ROTATE_CW ||
++					ofbi->rotation == FB_ROTATE_CCW) {
++				outw = var->yres;
++				outh = var->xres;
++			} else {
++				outw = var->xres;
++				outh = var->yres;
++			}
++		} else {
++			outw = ovl->info.out_width;
++			outh = ovl->info.out_height;
++		}
++
++		if (init) {
++			posx = 0;
++			posy = 0;
++		} else {
++			posx = ovl->info.pos_x;
++			posy = ovl->info.pos_y;
++		}
++
++		r = omapfb_setup_overlay(fbi, ovl, posx, posy, outw, outh);
++		if (r)
++			goto err;
++
++		if (!init && ovl->manager)
++			ovl->manager->apply(ovl->manager);
++	}
++	return 0;
++err:
++	DBG("apply_changes failed\n");
++	return r;
++}
++
++/* checks var and eventually tweaks it to something supported,
++ * DO NOT MODIFY PAR */
++static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
++{
++	int r;
++
++	DBG("check_var(%d)\n", FB2OFB(fbi)->id);
++
++	r = check_fb_var(fbi, var);
++
++	return r;
++}
++
++/* set the video mode according to info->var */
++static int omapfb_set_par(struct fb_info *fbi)
++{
++	int r;
++
++	DBG("set_par(%d)\n", FB2OFB(fbi)->id);
++
++	set_fb_fix(fbi);
++	r = omapfb_apply_changes(fbi, 0);
++
++	return r;
++}
++
++static int omapfb_pan_display(struct fb_var_screeninfo *var,
++		struct fb_info *fbi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	int r = 0;
++
++	DBG("pan_display(%d)\n", ofbi->id);
++
++	omapfb_lock(fbdev);
++
++	if (var->xoffset != fbi->var.xoffset ||
++	    var->yoffset != fbi->var.yoffset) {
++		struct fb_var_screeninfo new_var;
++
++		new_var = fbi->var;
++		new_var.xoffset = var->xoffset;
++		new_var.yoffset = var->yoffset;
++
++		r = check_fb_var(fbi, &new_var);
++
++		if (r == 0) {
++			fbi->var = new_var;
++			set_fb_fix(fbi);
++			r = omapfb_apply_changes(fbi, 0);
++		}
++	}
++
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static void mmap_user_open(struct vm_area_struct *vma)
++{
++	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
++
++	atomic_inc(&ofbi->map_count);
++}
++
++static void mmap_user_close(struct vm_area_struct *vma)
++{
++	struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
++
++	atomic_dec(&ofbi->map_count);
++}
++
++static struct vm_operations_struct mmap_user_ops = {
++	.open = mmap_user_open,
++	.close = mmap_user_close,
++};
++
++static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct fb_fix_screeninfo *fix = &fbi->fix;
++	unsigned long off;
++	unsigned long start;
++	u32 len;
++
++	if (vma->vm_end - vma->vm_start == 0)
++		return 0;
++	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
++		return -EINVAL;
++	off = vma->vm_pgoff << PAGE_SHIFT;
++
++	start = omapfb_get_region_paddr(ofbi);
++	len = fix->smem_len;
++	if (off >= len)
++		return -EINVAL;
++	if ((vma->vm_end - vma->vm_start + off) > len)
++		return -EINVAL;
++
++	off += start;
++
++	DBG("user mmap region start %lx, len %d, off %lx\n", start, len, off);
++
++	vma->vm_pgoff = off >> PAGE_SHIFT;
++	vma->vm_flags |= VM_IO | VM_RESERVED;
++	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
++	vma->vm_ops = &mmap_user_ops;
++	vma->vm_private_data = ofbi;
++	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
++			     vma->vm_end - vma->vm_start, vma->vm_page_prot))
++		return -EAGAIN;
++	/* vm_ops.open won't be called for mmap itself. */
++	atomic_inc(&ofbi->map_count);
++	return 0;
++}
++
++/* Store a single color palette entry into a pseudo palette or the hardware
++ * palette if one is available. For now we support only 16bpp and thus store
++ * the entry only to the pseudo palette.
++ */
++static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
++		u_int blue, u_int transp, int update_hw_pal)
++{
++	/*struct omapfb_info *ofbi = FB2OFB(fbi);*/
++	/*struct omapfb2_device *fbdev = ofbi->fbdev;*/
++	struct fb_var_screeninfo *var = &fbi->var;
++	int r = 0;
++
++	enum omapfb_color_format mode = OMAPFB_COLOR_RGB24U; /* XXX */
++
++	/*switch (plane->color_mode) {*/
++	switch (mode) {
++	case OMAPFB_COLOR_YUV422:
++	case OMAPFB_COLOR_YUV420:
++	case OMAPFB_COLOR_YUY422:
++		r = -EINVAL;
++		break;
++	case OMAPFB_COLOR_CLUT_8BPP:
++	case OMAPFB_COLOR_CLUT_4BPP:
++	case OMAPFB_COLOR_CLUT_2BPP:
++	case OMAPFB_COLOR_CLUT_1BPP:
++		/*
++		   if (fbdev->ctrl->setcolreg)
++		   r = fbdev->ctrl->setcolreg(regno, red, green, blue,
++		   transp, update_hw_pal);
++		   */
++		/* Fallthrough */
++		r = -EINVAL;
++		break;
++	case OMAPFB_COLOR_RGB565:
++	case OMAPFB_COLOR_RGB444:
++	case OMAPFB_COLOR_RGB24P:
++	case OMAPFB_COLOR_RGB24U:
++		if (r != 0)
++			break;
++
++		if (regno < 0) {
++			r = -EINVAL;
++			break;
++		}
++
++		if (regno < 16) {
++			u16 pal;
++			pal = ((red >> (16 - var->red.length)) <<
++					var->red.offset) |
++				((green >> (16 - var->green.length)) <<
++				 var->green.offset) |
++				(blue >> (16 - var->blue.length));
++			((u32 *)(fbi->pseudo_palette))[regno] = pal;
++		}
++		break;
++	default:
++		BUG();
++	}
++	return r;
++}
++
++static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
++		u_int transp, struct fb_info *info)
++{
++	DBG("setcolreg\n");
++
++	return _setcolreg(info, regno, red, green, blue, transp, 1);
++}
++
++static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
++{
++	int count, index, r;
++	u16 *red, *green, *blue, *transp;
++	u16 trans = 0xffff;
++
++	DBG("setcmap\n");
++
++	red     = cmap->red;
++	green   = cmap->green;
++	blue    = cmap->blue;
++	transp  = cmap->transp;
++	index   = cmap->start;
++
++	for (count = 0; count < cmap->len; count++) {
++		if (transp)
++			trans = *transp++;
++		r = _setcolreg(info, index++, *red++, *green++, *blue++, trans,
++				count == cmap->len - 1);
++		if (r != 0)
++			return r;
++	}
++
++	return 0;
++}
++
++static int omapfb_blank(int blank, struct fb_info *fbi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++	int do_update = 0;
++	int r = 0;
++
++	omapfb_lock(fbdev);
++
++	switch (blank) {
++	case FB_BLANK_UNBLANK:
++		if (display->state != OMAP_DSS_DISPLAY_SUSPENDED)
++			goto exit;
++
++		if (display->resume)
++			r = display->resume(display);
++
++		if (r == 0 && display->get_update_mode &&
++				display->get_update_mode(display) ==
++				OMAP_DSS_UPDATE_MANUAL)
++			do_update = 1;
++
++		break;
++
++	case FB_BLANK_NORMAL:
++		/* FB_BLANK_NORMAL could be implemented.
++		 * Needs DSS additions. */
++	case FB_BLANK_VSYNC_SUSPEND:
++	case FB_BLANK_HSYNC_SUSPEND:
++	case FB_BLANK_POWERDOWN:
++		if (display->state != OMAP_DSS_DISPLAY_ACTIVE)
++			goto exit;
++
++		if (display->suspend)
++			r = display->suspend(display);
++
++		break;
++
++	default:
++		r = -EINVAL;
++	}
++
++exit:
++	omapfb_unlock(fbdev);
++
++	if (r == 0 && do_update && display->update) {
++		u16 w, h;
++		display->get_resolution(display, &w, &h);
++
++		r = display->update(display, 0, 0, w, h);
++	}
++
++	return r;
++}
++
++#if 0
++/* XXX fb_read and fb_write are needed for VRFB */
++ssize_t omapfb_write(struct fb_info *info, const char __user *buf,
++		size_t count, loff_t *ppos)
++{
++	DBG("omapfb_write %d, %lu\n", count, (unsigned long)*ppos);
++	// XXX needed for VRFB
++	return count;
++}
++#endif
++
++static struct fb_ops omapfb_ops = {
++	.owner          = THIS_MODULE,
++	.fb_open        = omapfb_open,
++	.fb_release     = omapfb_release,
++	.fb_fillrect    = cfb_fillrect,
++	.fb_copyarea    = cfb_copyarea,
++	.fb_imageblit   = cfb_imageblit,
++	.fb_blank       = omapfb_blank,
++	.fb_ioctl       = omapfb_ioctl,
++	.fb_check_var   = omapfb_check_var,
++	.fb_set_par     = omapfb_set_par,
++	.fb_pan_display = omapfb_pan_display,
++	.fb_mmap	= omapfb_mmap,
++	.fb_setcolreg	= omapfb_setcolreg,
++	.fb_setcmap	= omapfb_setcmap,
++	//.fb_write	= omapfb_write,
++};
++
++static void omapfb_free_fbmem(struct fb_info *fbi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omapfb2_mem_region *rg;
++
++	rg = &ofbi->region;
++
++	if (rg->paddr)
++		if (omap_vram_free(rg->paddr, rg->size))
++			dev_err(fbdev->dev, "VRAM FREE failed\n");
++
++	if (rg->vaddr)
++		iounmap(rg->vaddr);
++
++	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++		/* unmap the 0 angle rotation */
++		if (rg->vrfb.vaddr[0]) {
++			iounmap(rg->vrfb.vaddr[0]);
++			omap_vrfb_release_ctx(&rg->vrfb);
++		}
++	}
++
++	rg->vaddr = NULL;
++	rg->paddr = 0;
++	rg->alloc = 0;
++	rg->size = 0;
++}
++
++static int omapfb_free_all_fbmem(struct omapfb2_device *fbdev)
++{
++	int i;
++
++	DBG("free all fbmem\n");
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		struct fb_info *fbi = fbdev->fbs[i];
++		omapfb_free_fbmem(fbi);
++		memset(&fbi->fix, 0, sizeof(fbi->fix));
++		memset(&fbi->var, 0, sizeof(fbi->var));
++	}
++
++	return 0;
++}
++
++static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
++		unsigned long paddr)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omapfb2_mem_region *rg;
++	void __iomem *vaddr;
++	int r;
++	int clear = 0;
++
++	rg = &ofbi->region;
++	memset(rg, 0, sizeof(*rg));
++
++	size = PAGE_ALIGN(size);
++
++	if (!paddr) {
++		DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
++		r = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr);
++		clear = 1;
++	} else {
++		DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
++				ofbi->id);
++		r = omap_vram_reserve(paddr, size);
++	}
++
++	if (r) {
++		dev_err(fbdev->dev, "failed to allocate framebuffer\n");
++		return -ENOMEM;
++	}
++
++	if (ofbi->rotation_type != OMAPFB_ROT_VRFB) {
++		vaddr = ioremap_wc(paddr, size);
++
++		if (!vaddr) {
++			dev_err(fbdev->dev, "failed to ioremap framebuffer\n");
++			omap_vram_free(paddr, size);
++			return -ENOMEM;
++		}
++
++		DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
++
++		if (clear)
++			memset_io(vaddr, 0, size);
++	} else {
++		void __iomem *va;
++
++		r = omap_vrfb_request_ctx(&rg->vrfb);
++		if (r) {
++			dev_err(fbdev->dev, "vrfb create ctx failed\n");
++			return r;
++		}
++
++		/* only ioremap the 0 angle view */
++		va = ioremap_wc(rg->vrfb.paddr[0], size);
++
++		if(!va) {
++			printk(KERN_ERR "vrfb: ioremap failed\n");
++			return -ENOMEM;
++		}
++
++		DBG("ioremapped vrfb area 0 to %p\n", va);
++
++		rg->vrfb.vaddr[0] = va;
++
++		vaddr = NULL;
++
++		if (clear)
++			memset_io(va, 0, size);
++	}
++
++	rg->paddr = paddr;
++	rg->vaddr = vaddr;
++	rg->size = size;
++	rg->alloc = 1;
++
++	return 0;
++}
++
++/* allocate fbmem using display resolution as reference */
++static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
++		unsigned long paddr)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omap_display *display;
++	int bytespp;
++
++	display =  fb2display(fbi);
++
++	if (!display)
++		return 0;
++
++	switch (display->get_recommended_bpp(display)) {
++	case 16:
++		bytespp = 2;
++		break;
++	case 24:
++		bytespp = 4;
++		break;
++	default:
++		bytespp = 4;
++		break;
++	}
++
++	if (!size) {
++		u16 w, h;
++
++		display->get_resolution(display, &w, &h);
++
++		if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++			int oldw = w, oldh = h;
++
++			omap_vrfb_adjust_size(&w, &h, bytespp);
++
++			/* Because we change the resolution of the 0 degree view,
++			 * we need to alloc max(w, h) for height */
++			h = max(w, h);
++			w = OMAP_VRFB_LINE_LEN;
++
++			DBG("adjusting fb mem size for VRFB, %dx%d -> %dx%d\n",
++					oldw, oldh, w, h);
++		}
++
++		size = w * h * bytespp;
++	}
++
++	return omapfb_alloc_fbmem(fbi, size, paddr);
++}
++
++static int omapfb_parse_vram_param(const char *param, int max_entries,
++		unsigned long *sizes, unsigned long *paddrs)
++{
++	int fbnum;
++	unsigned long size;
++	unsigned long paddr = 0;
++	char *p, *start;
++
++	start = (char *)param;
++
++	while (1) {
++		p = start;
++
++		fbnum = simple_strtoul(p, &p, 10);
++
++		if (p == param)
++			return -EINVAL;
++
++		if (*p != ':')
++			return -EINVAL;
++
++		if (fbnum >= max_entries)
++			return -EINVAL;
++
++		size = memparse(p + 1, &p);
++
++		if (!size)
++			return -EINVAL;
++
++		paddr = 0;
++
++		if (*p == '@') {
++			paddr = simple_strtoul(p + 1, &p, 16);
++
++			if (!paddr)
++				return -EINVAL;
++
++		}
++
++		paddrs[fbnum] = paddr;
++		sizes[fbnum] = size;
++
++		if (*p == 0)
++			break;
++
++		if (*p != ',')
++			return -EINVAL;
++
++		++p;
++
++		start = p;
++	}
++
++	return 0;
++}
++
++static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
++{
++	int i, r;
++	unsigned long vram_sizes[10];
++	unsigned long vram_paddrs[10];
++
++	memset(&vram_sizes, 0, sizeof(vram_sizes));
++	memset(&vram_paddrs, 0, sizeof(vram_paddrs));
++
++	if (def_vram &&	omapfb_parse_vram_param(def_vram, 10,
++				vram_sizes, vram_paddrs)) {
++		dev_err(fbdev->dev, "failed to parse vram parameter\n");
++
++		memset(&vram_sizes, 0, sizeof(vram_sizes));
++		memset(&vram_paddrs, 0, sizeof(vram_paddrs));
++	}
++
++	if (fbdev->dev->platform_data) {
++		struct omapfb_platform_data *opd;
++		opd = fbdev->dev->platform_data;
++		for (i = 0; i < opd->mem_desc.region_cnt; ++i) {
++			if (!vram_sizes[i]) {
++				unsigned long size;
++				unsigned long paddr;
++
++				size = opd->mem_desc.region[i].size;
++				paddr = opd->mem_desc.region[i].paddr;
++
++				vram_sizes[i] = size;
++				vram_paddrs[i] = paddr;
++			}
++		}
++	}
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		/* allocate memory automatically only for fb0, or if
++		 * excplicitly defined with vram or plat data option */
++		if (i == 0 || vram_sizes[i] != 0) {
++			r = omapfb_alloc_fbmem_display(fbdev->fbs[i],
++					vram_sizes[i], vram_paddrs[i]);
++
++			if (r)
++				return r;
++		}
++	}
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++		struct omapfb2_mem_region *rg;
++		rg = &ofbi->region;
++
++		DBG("region%d phys %08x virt %p size=%lu\n",
++				i,
++				rg->paddr,
++				rg->vaddr,
++				rg->size);
++	}
++
++	return 0;
++}
++
++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_display *display = fb2display(fbi);
++	struct omapfb2_mem_region *rg = &ofbi->region;
++	unsigned long old_size = rg->size;
++	unsigned long old_paddr = rg->paddr;
++	int old_type = rg->type;
++	int r;
++
++	if (type > OMAPFB_MEMTYPE_MAX)
++		return -EINVAL;
++
++	size = PAGE_ALIGN(size);
++
++	if (old_size == size && old_type == type)
++		return 0;
++
++	if (display && display->sync)
++			display->sync(display);
++
++	omapfb_free_fbmem(fbi);
++
++	if (size == 0) {
++		memset(&fbi->fix, 0, sizeof(fbi->fix));
++		memset(&fbi->var, 0, sizeof(fbi->var));
++		return 0;
++	}
++
++	r = omapfb_alloc_fbmem(fbi, size, 0);
++
++	if (r) {
++		if (old_size)
++			omapfb_alloc_fbmem(fbi, old_size, old_paddr);
++
++		if (rg->size == 0) {
++			memset(&fbi->fix, 0, sizeof(fbi->fix));
++			memset(&fbi->var, 0, sizeof(fbi->var));
++		}
++
++		return r;
++	}
++
++	if (old_size == size)
++		return 0;
++
++	if (old_size == 0) {
++		DBG("initializing fb %d\n", ofbi->id);
++		r = omapfb_fb_init(fbdev, fbi);
++		if (r) {
++			DBG("omapfb_fb_init failed\n");
++			goto err;
++		}
++		r = omapfb_apply_changes(fbi, 1);
++		if (r) {
++			DBG("omapfb_apply_changes failed\n");
++			goto err;
++		}
++	} else {
++		struct fb_var_screeninfo new_var;
++		memcpy(&new_var, &fbi->var, sizeof(new_var));
++		r = check_fb_var(fbi, &new_var);
++		if (r)
++			goto err;
++		memcpy(&fbi->var, &new_var, sizeof(fbi->var));
++		set_fb_fix(fbi);
++	}
++
++	return 0;
++err:
++	omapfb_free_fbmem(fbi);
++	memset(&fbi->fix, 0, sizeof(fbi->fix));
++	memset(&fbi->var, 0, sizeof(fbi->var));
++	return r;
++}
++
++/* initialize fb_info, var, fix to something sane based on the display */
++int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
++{
++	struct fb_var_screeninfo *var = &fbi->var;
++	struct fb_fix_screeninfo *fix = &fbi->fix;
++	struct omap_display *display = fb2display(fbi);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	int r = 0;
++
++	fbi->fbops = &omapfb_ops;
++	fbi->flags = FBINFO_FLAG_DEFAULT;
++	fbi->pseudo_palette = fbdev->pseudo_palette;
++
++	strncpy(fix->id, MODULE_NAME, sizeof(fix->id));
++
++	if (ofbi->region.size == 0) {
++		memset(&fbi->fix, 0, sizeof(fbi->fix));
++		memset(&fbi->var, 0, sizeof(fbi->var));
++		return 0;
++	}
++
++	var->nonstd = 0;
++
++	var->rotate = ofbi->rotation;
++
++	if (display) {
++		u16 w, h;
++		display->get_resolution(display, &w, &h);
++
++		if (ofbi->rotation == FB_ROTATE_CW ||
++				ofbi->rotation == FB_ROTATE_CCW) {
++			var->xres = h;
++			var->yres = w;
++		} else {
++			var->xres = w;
++			var->yres = h;
++		}
++
++		var->xres_virtual = var->xres;
++		var->yres_virtual = var->yres;
++
++		switch (display->get_recommended_bpp(display)) {
++		case 16:
++			var->bits_per_pixel = 16;
++			break;
++		case 24:
++			var->bits_per_pixel = 32;
++			break;
++		default:
++			dev_err(fbdev->dev, "illegal display bpp\n");
++			return -EINVAL;
++		}
++	} else {
++		/* if there's no display, let's just guess some basic values */
++		var->xres = 320;
++		var->yres = 240;
++		var->xres_virtual = var->xres;
++		var->yres_virtual = var->yres;
++		var->bits_per_pixel = 16;
++	}
++
++	r = check_fb_var(fbi, var);
++	if (r)
++		goto err;
++
++	set_fb_fix(fbi);
++err:
++	return r;
++}
++
++static void fbinfo_cleanup(struct omapfb2_device *fbdev, struct fb_info *fbi)
++{
++	fb_dealloc_cmap(&fbi->cmap);
++}
++
++
++static void omapfb_free_resources(struct omapfb2_device *fbdev)
++{
++	int i;
++
++	DBG("free_resources\n");
++
++	if (fbdev == NULL)
++		return;
++
++	for (i = 0; i < fbdev->num_fbs; i++)
++		unregister_framebuffer(fbdev->fbs[i]);
++
++	/* free the reserved fbmem */
++	omapfb_free_all_fbmem(fbdev);
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		fbinfo_cleanup(fbdev, fbdev->fbs[i]);
++		framebuffer_release(fbdev->fbs[i]);
++	}
++
++	for (i = 0; i < fbdev->num_displays; i++) {
++		if (fbdev->displays[i]->state != OMAP_DSS_DISPLAY_DISABLED)
++			fbdev->displays[i]->disable(fbdev->displays[i]);
++
++		omap_dss_put_display(fbdev->displays[i]);
++	}
++
++	dev_set_drvdata(fbdev->dev, NULL);
++	kfree(fbdev);
++}
++
++static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
++{
++	int r, i;
++
++	fbdev->num_fbs = 0;
++
++	DBG("create %d framebuffers\n",	CONFIG_FB_OMAP2_NUM_FBS);
++
++	/* allocate fb_infos */
++	for (i = 0; i < CONFIG_FB_OMAP2_NUM_FBS; i++) {
++		struct fb_info *fbi;
++		struct omapfb_info *ofbi;
++
++		fbi = framebuffer_alloc(sizeof(struct omapfb_info),
++				fbdev->dev);
++
++		if (fbi == NULL) {
++			dev_err(fbdev->dev,
++				"unable to allocate memory for plane info\n");
++			return -ENOMEM;
++		}
++
++		fbdev->fbs[i] = fbi;
++
++		ofbi = FB2OFB(fbi);
++		ofbi->fbdev = fbdev;
++		ofbi->id = i;
++
++		/* assign these early, so that fb alloc can use them */
++		ofbi->rotation_type = def_vrfb ? OMAPFB_ROT_VRFB :
++			OMAPFB_ROT_DMA;
++		ofbi->rotation = def_rotate;
++		ofbi->mirror = def_mirror;
++
++		fbdev->num_fbs++;
++	}
++
++	DBG("fb_infos allocated\n");
++
++	/* assign overlays for the fbs */
++	for (i = 0; i < min(fbdev->num_fbs, fbdev->num_overlays); i++) {
++		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++
++		ofbi->overlays[0] = fbdev->overlays[i];
++		ofbi->num_overlays = 1;
++	}
++
++	/* allocate fb memories */
++	r = omapfb_allocate_all_fbs(fbdev);
++	if (r) {
++		dev_err(fbdev->dev, "failed to allocate fbmem\n");
++		return r;
++	}
++
++	DBG("fbmems allocated\n");
++
++	/* setup fb_infos */
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		r = omapfb_fb_init(fbdev, fbdev->fbs[i]);
++		if (r) {
++			dev_err(fbdev->dev, "failed to setup fb_info\n");
++			return r;
++		}
++	}
++
++	DBG("fb_infos initialized\n");
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		r = register_framebuffer(fbdev->fbs[i]);
++		if (r != 0) {
++			dev_err(fbdev->dev,
++				"registering framebuffer %d failed\n", i);
++			return r;
++		}
++	}
++
++	DBG("framebuffers registered\n");
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		r = omapfb_apply_changes(fbdev->fbs[i], 1);
++		if (r) {
++			dev_err(fbdev->dev, "failed to change mode\n");
++			return r;
++		}
++	}
++
++	DBG("create sysfs for fbs\n");
++	r = omapfb_create_sysfs(fbdev);
++	if (r) {
++		dev_err(fbdev->dev, "failed to create sysfs entries\n");
++		return r;
++	}
++
++	/* Enable fb0 */
++	if (fbdev->num_fbs > 0) {
++		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
++
++		if (ofbi->num_overlays > 0 ) {
++			struct omap_overlay *ovl = ofbi->overlays[0];
++
++			r = omapfb_overlay_enable(ovl, 1);
++
++			if (r) {
++				dev_err(fbdev->dev,
++						"failed to enable overlay\n");
++				return r;
++			}
++		}
++	}
++
++	DBG("create_framebuffers done\n");
++
++	return 0;
++}
++
++int omapfb_mode_to_timings(const char *mode_str,
++		struct omap_video_timings *timings, u8 *bpp)
++{
++	struct fb_info fbi;
++	struct fb_var_screeninfo var;
++	struct fb_ops fbops;
++	int r;
++
++#ifdef CONFIG_OMAP2_DSS_VENC
++	if (strcmp(mode_str, "pal") == 0) {
++		*timings = omap_dss_pal_timings;
++		*bpp = 0;
++		return 0;
++	} else if (strcmp(mode_str, "ntsc") == 0) {
++		*timings = omap_dss_ntsc_timings;
++		*bpp = 0;
++		return 0;
++	}
++#endif
++
++	/* this is quite a hack, but I wanted to use the modedb and for
++	 * that we need fb_info and var, so we create dummy ones */
++
++	memset(&fbi, 0, sizeof(fbi));
++	memset(&var, 0, sizeof(var));
++	memset(&fbops, 0, sizeof(fbops));
++	fbi.fbops = &fbops;
++
++	r = fb_find_mode(&var, &fbi, mode_str, NULL, 0, NULL, 24);
++
++	if (r != 0) {
++		timings->pixel_clock = PICOS2KHZ(var.pixclock);
++		timings->hfp = var.left_margin;
++		timings->hbp = var.right_margin;
++		timings->vfp = var.upper_margin;
++		timings->vbp = var.lower_margin;
++		timings->hsw = var.hsync_len;
++		timings->vsw = var.vsync_len;
++		timings->x_res = var.xres;
++		timings->y_res = var.yres;
++
++		switch (var.bits_per_pixel) {
++		case 16:
++			*bpp = 16;
++			break;
++		case 24:
++		case 32:
++		default:
++			*bpp = 24;
++			break;
++		}
++
++		return 0;
++	} else {
++		return -EINVAL;
++	}
++}
++
++static int omapfb_set_def_mode(struct omap_display *display, char *mode_str)
++{
++	int r;
++	u8 bpp;
++	struct omap_video_timings timings;
++
++	r = omapfb_mode_to_timings(mode_str, &timings, &bpp);
++	if (r)
++		return r;
++
++	display->panel->recommended_bpp = bpp;
++
++	if (!display->check_timings || !display->set_timings)
++		return -EINVAL;
++
++	r = display->check_timings(display, &timings);
++	if (r)
++		return r;
++
++	display->set_timings(display, &timings);
++
++	return 0;
++}
++
++static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
++{
++	char *str, *options, *this_opt;
++	int r = 0;
++
++	str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL);
++	strcpy(str, def_mode);
++	options = str;
++
++	while (!r && (this_opt = strsep(&options, ",")) != NULL) {
++		char *p, *display_str, *mode_str;
++		struct omap_display *display;
++		int i;
++
++		p = strchr(this_opt, ':');
++		if (!p) {
++			r = -EINVAL;
++			break;
++		}
++
++		*p = 0;
++		display_str = this_opt;
++		mode_str = p + 1;
++
++		display = NULL;
++		for (i = 0; i < fbdev->num_displays; ++i) {
++			if (strcmp(fbdev->displays[i]->name,
++						display_str) == 0) {
++				display = fbdev->displays[i];
++				break;
++			}
++		}
++
++		if (!display) {
++			r = -EINVAL;
++			break;
++		}
++
++		r = omapfb_set_def_mode(display, mode_str);
++		if (r)
++			break;
++	}
++
++	kfree(str);
++
++	return r;
++}
++
++static int omapfb_probe(struct platform_device *pdev)
++{
++	struct omapfb2_device *fbdev = NULL;
++	int r = 0;
++	int i, t;
++	struct omap_overlay *ovl;
++	struct omap_display *def_display;
++
++	DBG("omapfb_probe\n");
++
++	if (pdev->num_resources != 0) {
++		dev_err(&pdev->dev, "probed for an unknown device\n");
++		r = -ENODEV;
++		goto err0;
++	}
++
++	fbdev = kzalloc(sizeof(struct omapfb2_device), GFP_KERNEL);
++	if (fbdev == NULL) {
++		r = -ENOMEM;
++		goto err0;
++	}
++
++	mutex_init(&fbdev->mtx);
++
++	fbdev->dev = &pdev->dev;
++	platform_set_drvdata(pdev, fbdev);
++
++	fbdev->num_displays = 0;
++	t = omap_dss_get_num_displays();
++	for (i = 0; i < t; i++) {
++		struct omap_display *display;
++		display = omap_dss_get_display(i);
++		if (!display) {
++			dev_err(&pdev->dev, "can't get display %d\n", i);
++			r = -EINVAL;
++			goto cleanup;
++		}
++
++		fbdev->displays[fbdev->num_displays++] = display;
++	}
++
++	if (fbdev->num_displays == 0) {
++		dev_err(&pdev->dev, "no displays\n");
++		r = -EINVAL;
++		goto cleanup;
++	}
++
++	fbdev->num_overlays = omap_dss_get_num_overlays();
++	for (i = 0; i < fbdev->num_overlays; i++)
++		fbdev->overlays[i] = omap_dss_get_overlay(i);
++
++	fbdev->num_managers = omap_dss_get_num_overlay_managers();
++	for (i = 0; i < fbdev->num_managers; i++)
++		fbdev->managers[i] = omap_dss_get_overlay_manager(i);
++
++
++	/* gfx overlay should be the default one. find a display
++	 * connected to that, and use it as default display */
++	ovl = omap_dss_get_overlay(0);
++	if (ovl->manager && ovl->manager->display) {
++		def_display = ovl->manager->display;
++	} else {
++		dev_err(&pdev->dev, "cannot find default display\n");
++		r = -EINVAL;
++		goto cleanup;
++	}
++
++	if (def_mode && strlen(def_mode) > 0) {
++		if (omapfb_parse_def_modes(fbdev))
++			dev_err(&pdev->dev, "cannot parse default modes\n");
++	}
++
++	r = omapfb_create_framebuffers(fbdev);
++	if (r)
++		goto cleanup;
++
++	for (i = 0; i < fbdev->num_managers; i++) {
++		struct omap_overlay_manager *mgr;
++		mgr = fbdev->managers[i];
++		r = mgr->apply(mgr);
++		if (r) {
++			dev_err(fbdev->dev, "failed to apply dispc config\n");
++			goto cleanup;
++		}
++	}
++
++	DBG("mgr->apply'ed\n");
++
++	r = def_display->enable(def_display);
++	if (r) {
++		dev_err(fbdev->dev, "Failed to enable display '%s'\n",
++				def_display->name);
++		goto cleanup;
++	}
++
++	/* set the update mode */
++	if (def_display->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
++#ifdef CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
++		if (def_display->set_update_mode)
++			def_display->set_update_mode(def_display,
++					OMAP_DSS_UPDATE_AUTO);
++		if (def_display->enable_te)
++			def_display->enable_te(def_display, 1);
++#else
++		if (def_display->set_update_mode)
++			def_display->set_update_mode(def_display,
++					OMAP_DSS_UPDATE_MANUAL);
++		if (def_display->enable_te)
++			def_display->enable_te(def_display, 0);
++#endif
++	} else {
++		if (def_display->set_update_mode)
++			def_display->set_update_mode(def_display,
++					OMAP_DSS_UPDATE_AUTO);
++	}
++
++	for (i = 0; i < fbdev->num_displays; i++) {
++		struct omap_display *display = fbdev->displays[i];
++		u16 w, h;
++
++		if (!display->get_update_mode || !display->update)
++			continue;
++
++		if (display->get_update_mode(display) ==
++				OMAP_DSS_UPDATE_MANUAL) {
++
++			display->get_resolution(display, &w, &h);
++			display->update(display, 0, 0, w, h);
++		}
++	}
++
++	DBG("display->updated\n");
++
++	return 0;
++
++cleanup:
++	omapfb_free_resources(fbdev);
++err0:
++	dev_err(&pdev->dev, "failed to setup omapfb\n");
++	return r;
++}
++
++static int omapfb_remove(struct platform_device *pdev)
++{
++	struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
++
++	/* FIXME: wait till completion of pending events */
++
++	omapfb_remove_sysfs(fbdev);
++
++	omapfb_free_resources(fbdev);
++
++	return 0;
++}
++
++static struct platform_driver omapfb_driver = {
++	.probe          = omapfb_probe,
++	.remove         = omapfb_remove,
++	.driver         = {
++		.name   = "omapfb",
++		.owner  = THIS_MODULE,
++	},
++};
++
++static int __init omapfb_init(void)
++{
++	DBG("omapfb_init\n");
++
++	if (platform_driver_register(&omapfb_driver)) {
++		printk(KERN_ERR "failed to register omapfb driver\n");
++		return -ENODEV;
++	}
++
++	return 0;
++}
++
++static void __exit omapfb_exit(void)
++{
++	DBG("omapfb_exit\n");
++	platform_driver_unregister(&omapfb_driver);
++}
++
++module_param_named(mode, def_mode, charp, 0);
++module_param_named(vram, def_vram, charp, 0);
++module_param_named(rotate, def_rotate, int, 0);
++module_param_named(vrfb, def_vrfb, bool, 0);
++module_param_named(mirror, def_mirror, bool, 0);
++
++/* late_initcall to let panel/ctrl drivers loaded first.
++ * I guess better option would be a more dynamic approach,
++ * so that omapfb reacts to new panels when they are loaded */
++late_initcall(omapfb_init);
++/*module_init(omapfb_init);*/
++module_exit(omapfb_exit);
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("OMAP2/3 Framebuffer");
++MODULE_LICENSE("GPL v2");
+diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+new file mode 100644
+index 0000000..2c88718
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+@@ -0,0 +1,371 @@
++/*
++ * linux/drivers/video/omap2/omapfb-sysfs.c
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/fb.h>
++#include <linux/sysfs.h>
++#include <linux/device.h>
++#include <linux/uaccess.h>
++#include <linux/platform_device.h>
++#include <linux/kernel.h>
++#include <linux/mm.h>
++#include <linux/omapfb.h>
++
++#include <mach/display.h>
++#include <mach/vrfb.h>
++
++#include "omapfb.h"
++
++static ssize_t show_rotate_type(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++
++	return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type);
++}
++
++static ssize_t show_mirror(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++
++	return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->mirror);
++}
++
++static ssize_t store_mirror(struct device *dev,
++		struct device_attribute *attr,
++		const char *buf, size_t count)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	bool mirror;
++	int r;
++	struct fb_var_screeninfo new_var;
++
++	mirror = simple_strtoul(buf, NULL, 0);
++
++	if (mirror != 0 && mirror != 1)
++		return -EINVAL;
++
++	omapfb_lock(fbdev);
++
++	ofbi->mirror = mirror;
++
++	memcpy(&new_var, &fbi->var, sizeof(new_var));
++	r = check_fb_var(fbi, &new_var);
++	if (r)
++		goto out;
++	memcpy(&fbi->var, &new_var, sizeof(fbi->var));
++
++	set_fb_fix(fbi);
++
++	r = omapfb_apply_changes(fbi, 0);
++	if (r)
++		goto out;
++
++	r = count;
++out:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static ssize_t show_overlays(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	ssize_t l = 0;
++	int t;
++
++	for (t = 0; t < ofbi->num_overlays; t++) {
++		struct omap_overlay *ovl = ofbi->overlays[t];
++		int ovlnum;
++
++		for (ovlnum = 0; ovlnum < fbdev->num_overlays; ++ovlnum)
++			if (ovl == fbdev->overlays[ovlnum])
++				break;
++
++		l += snprintf(buf + l, PAGE_SIZE - l, "%s%d",
++				t == 0 ? "" : ",", ovlnum);
++	}
++
++	l += snprintf(buf + l, PAGE_SIZE - l, "\n");
++
++	return l;
++}
++
++static struct omapfb_info *get_overlay_fb(struct omapfb2_device *fbdev,
++		struct omap_overlay *ovl)
++{
++	int i, t;
++
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
++
++		for (t = 0; t < ofbi->num_overlays; t++) {
++			if (ofbi->overlays[t] == ovl)
++				return ofbi;
++		}
++	}
++
++	return NULL;
++}
++
++static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
++		const char *buf, size_t count)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	struct omap_overlay *ovls[OMAPFB_MAX_OVL_PER_FB];
++	struct omap_overlay *ovl;
++	int num_ovls, r, i;
++	int len;
++
++	num_ovls = 0;
++
++	len = strlen(buf);
++	if (buf[len - 1] == '\n')
++		len = len - 1;
++
++	omapfb_lock(fbdev);
++
++	if (len > 0) {
++		char *p = (char *)buf;
++		int ovlnum;
++
++		while (p < buf + len) {
++			int found;
++			if (num_ovls == OMAPFB_MAX_OVL_PER_FB) {
++				r = -EINVAL;
++				goto out;
++			}
++
++			ovlnum = simple_strtoul(p, &p, 0);
++			if (ovlnum > fbdev->num_overlays) {
++				r = -EINVAL;
++				goto out;
++			}
++
++			found = 0;
++			for (i = 0; i < num_ovls; ++i) {
++				if (ovls[i] == fbdev->overlays[ovlnum]) {
++					found = 1;
++					break;
++				}
++			}
++
++			if (!found)
++				ovls[num_ovls++] = fbdev->overlays[ovlnum];
++
++			p++;
++		}
++	}
++
++	for (i = 0; i < num_ovls; ++i) {
++		struct omapfb_info *ofbi2 = get_overlay_fb(fbdev, ovls[i]);
++		if (ofbi2 && ofbi2 != ofbi) {
++			dev_err(fbdev->dev, "overlay already in use\n");
++			r = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* detach unused overlays */
++	for (i = 0; i < ofbi->num_overlays; ++i) {
++		int t, found;
++
++		ovl = ofbi->overlays[i];
++
++		found = 0;
++
++		for (t = 0; t < num_ovls; ++t) {
++			if (ovl == ovls[t]) {
++				found = 1;
++				break;
++			}
++		}
++
++		if (found)
++			continue;
++
++		DBG("detaching %d\n", ofbi->overlays[i]->id);
++
++		omapfb_overlay_enable(ovl, 0);
++
++		if (ovl->manager)
++			ovl->manager->apply(ovl->manager);
++
++		for (t = i + 1; t < ofbi->num_overlays; t++)
++			ofbi->overlays[t-1] = ofbi->overlays[t];
++
++		ofbi->num_overlays--;
++		i--;
++	}
++
++	for (i = 0; i < num_ovls; ++i) {
++		int t, found;
++
++		ovl = ovls[i];
++
++		found = 0;
++
++		for (t = 0; t < ofbi->num_overlays; ++t) {
++			if (ovl == ofbi->overlays[t]) {
++				found = 1;
++				break;
++			}
++		}
++
++		if (found)
++			continue;
++
++		ofbi->overlays[ofbi->num_overlays++] = ovl;
++
++		r = omapfb_apply_changes(fbi, 1);
++		if (r)
++			goto out;
++
++		if (ovl->manager) {
++			r = ovl->manager->apply(ovl->manager);
++			if (r)
++				goto out;
++		}
++	}
++
++	r = count;
++out:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static ssize_t show_size(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++
++	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
++}
++
++static ssize_t store_size(struct device *dev, struct device_attribute *attr,
++		const char *buf, size_t count)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	unsigned long size;
++	int r;
++	int i;
++
++	size = PAGE_ALIGN(simple_strtoul(buf, NULL, 0));
++
++	omapfb_lock(fbdev);
++
++	for (i = 0; i < ofbi->num_overlays; i++) {
++		if (ofbi->overlays[i]->info.enabled) {
++			r = -EBUSY;
++			goto out;
++		}
++	}
++
++	if (size != ofbi->region.size) {
++		r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
++		if (r) {
++			dev_err(dev, "realloc fbmem failed\n");
++			goto out;
++		}
++	}
++
++	r = count;
++out:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++static ssize_t show_phys(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++
++	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
++}
++
++static ssize_t show_virt(struct device *dev,
++		struct device_attribute *attr, char *buf)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++
++	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
++}
++
++static struct device_attribute omapfb_attrs[] = {
++	__ATTR(rotate_type, S_IRUGO, show_rotate_type, NULL),
++	__ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror),
++	__ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size),
++	__ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays),
++	__ATTR(phys_addr, S_IRUGO, show_phys, NULL),
++	__ATTR(virt_addr, S_IRUGO, show_virt, NULL),
++};
++
++int omapfb_create_sysfs(struct omapfb2_device *fbdev)
++{
++	int i;
++	int r;
++
++	DBG("create sysfs for fbs\n");
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		int t;
++		for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++) {
++			r = device_create_file(fbdev->fbs[i]->dev,
++					&omapfb_attrs[t]);
++
++			if (r) {
++				dev_err(fbdev->dev, "failed to create sysfs file\n");
++				return r;
++			}
++		}
++	}
++
++	return 0;
++}
++
++void omapfb_remove_sysfs(struct omapfb2_device *fbdev)
++{
++	int i, t;
++
++	DBG("remove sysfs for fbs\n");
++	for (i = 0; i < fbdev->num_fbs; i++) {
++		for (t = 0; t < ARRAY_SIZE(omapfb_attrs); t++)
++			device_remove_file(fbdev->fbs[i]->dev,
++					&omapfb_attrs[t]);
++	}
++}
++
+diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
+new file mode 100644
+index 0000000..65e9e6e
+--- /dev/null
++++ b/drivers/video/omap2/omapfb/omapfb.h
+@@ -0,0 +1,153 @@
++/*
++ * linux/drivers/video/omap2/omapfb.h
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * Some code and ideas taken from drivers/video/omap/ driver
++ * by Imre Deak.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#ifndef __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
++#define __DRIVERS_VIDEO_OMAP2_OMAPFB_H__
++
++#ifdef CONFIG_FB_OMAP2_DEBUG_SUPPORT
++#define DEBUG
++#endif
++
++#ifdef DEBUG
++extern unsigned int omapfb_debug;
++#define DBG(format, ...) \
++	if (omapfb_debug) \
++		printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__)
++#else
++#define DBG(format, ...)
++#endif
++
++#define FB2OFB(fb_info) ((struct omapfb_info *)(fb_info->par))
++
++/* max number of overlays to which a framebuffer data can be direct */
++#define OMAPFB_MAX_OVL_PER_FB 3
++
++struct omapfb2_mem_region {
++	u32		paddr;
++	void __iomem	*vaddr;
++	struct vrfb	vrfb;
++	unsigned long	size;
++	u8		type;		/* OMAPFB_PLANE_MEM_* */
++	bool		alloc;		/* allocated by the driver */
++	bool		map;		/* kernel mapped by the driver */
++};
++
++enum omapfb_rotation_type {
++	OMAPFB_ROT_DMA = 0,
++	OMAPFB_ROT_VRFB = 1,
++};
++
++/* appended to fb_info */
++struct omapfb_info {
++	int id;
++	struct omapfb2_mem_region region;
++	atomic_t map_count;
++	int num_overlays;
++	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
++	struct omapfb2_device *fbdev;
++	enum omapfb_rotation_type rotation_type;
++	u8 rotation;
++	bool mirror;
++};
++
++struct omapfb2_device {
++	struct device *dev;
++	struct mutex  mtx;
++
++	u32 pseudo_palette[17];
++
++	int state;
++
++	unsigned num_fbs;
++	struct fb_info *fbs[10];
++
++	unsigned num_displays;
++	struct omap_display *displays[10];
++	unsigned num_overlays;
++	struct omap_overlay *overlays[10];
++	unsigned num_managers;
++	struct omap_overlay_manager *managers[10];
++};
++
++struct omapfb_colormode {
++	enum omap_color_mode dssmode;
++	u32 bits_per_pixel;
++	u32 nonstd;
++	struct fb_bitfield red;
++	struct fb_bitfield green;
++	struct fb_bitfield blue;
++	struct fb_bitfield transp;
++};
++
++u32 omapfb_get_region_paddr(struct omapfb_info *ofbi);
++void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi);
++
++void set_fb_fix(struct fb_info *fbi);
++int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var);
++int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type);
++int omapfb_apply_changes(struct fb_info *fbi, int init);
++int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi);
++
++int omapfb_create_sysfs(struct omapfb2_device *fbdev);
++void omapfb_remove_sysfs(struct omapfb2_device *fbdev);
++
++int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg);
++
++int omapfb_mode_to_timings(const char *mode_str,
++		struct omap_video_timings *timings, u8 *bpp);
++
++/* find the display connected to this fb, if any */
++static inline struct omap_display *fb2display(struct fb_info *fbi)
++{
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	int i;
++
++	/* XXX: returns the display connected to first attached overlay */
++	for (i = 0; i < ofbi->num_overlays; i++) {
++		if (ofbi->overlays[i]->manager)
++			return ofbi->overlays[i]->manager->display;
++	}
++
++	return NULL;
++}
++
++static inline void omapfb_lock(struct omapfb2_device *fbdev)
++{
++	mutex_lock(&fbdev->mtx);
++}
++
++static inline void omapfb_unlock(struct omapfb2_device *fbdev)
++{
++	mutex_unlock(&fbdev->mtx);
++}
++
++static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
++		int enable)
++{
++	struct omap_overlay_info info;
++
++	ovl->get_overlay_info(ovl, &info);
++	info.enabled = enable;
++	return ovl->set_overlay_info(ovl, &info);
++}
++
++#endif
+diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
+index b226bdf..96190b2 100644
+--- a/include/linux/omapfb.h
++++ b/include/linux/omapfb.h
+@@ -50,6 +50,8 @@
+ #define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+ #define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+ #define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
++#define OMAPFB_WAITFORVSYNC	OMAP_IO(57)
++#define OMAPFB_MEMORY_READ	OMAP_IOR(58, struct omapfb_memory_read)
+ 
+ #define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+ #define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+@@ -90,6 +92,13 @@ enum omapfb_color_format {
+ 	OMAPFB_COLOR_CLUT_1BPP,
+ 	OMAPFB_COLOR_RGB444,
+ 	OMAPFB_COLOR_YUY422,
++
++	OMAPFB_COLOR_ARGB16,
++	OMAPFB_COLOR_RGB24U,	/* RGB24, 32-bit container */
++	OMAPFB_COLOR_RGB24P,	/* RGB24, 24-bit container */
++	OMAPFB_COLOR_ARGB32,
++	OMAPFB_COLOR_RGBA32,
++	OMAPFB_COLOR_RGBX32,
+ };
+ 
+ struct omapfb_update_window {
+@@ -161,6 +170,15 @@ enum omapfb_update_mode {
+ 	OMAPFB_MANUAL_UPDATE
+ };
+ 
++struct omapfb_memory_read {
++	__u16 x;
++	__u16 y;
++	__u16 w;
++	__u16 h;
++	size_t buffer_size;
++	void __user *buffer;
++};
++
+ #ifdef __KERNEL__
+ 
+ #include <linux/completion.h>
+@@ -376,6 +394,8 @@ extern struct lcd_ctrl omap1_lcd_ctrl;
+ extern struct lcd_ctrl omap2_disp_ctrl;
+ #endif
+ 
++extern void omapfb_set_platform_data(struct omapfb_platform_data *data);
++
+ extern void omapfb_reserve_sdram(void);
+ extern void omapfb_register_panel(struct lcd_panel *panel);
+ extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0005-DSS2-Add-panel-drivers.patch b/recipes/linux/linux-omap-pm/dss2/0005-DSS2-Add-panel-drivers.patch
new file mode 100644
index 0000000000..d12586ca2f
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0005-DSS2-Add-panel-drivers.patch
@@ -0,0 +1,396 @@
+From 4cc0368574f587f448231ccd121266bed4bf9729 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 10:29:56 +0300
+Subject: [PATCH] DSS2: Add panel drivers
+
+- Generic panel
+- Samsung LTE430WQ-F0C LCD Panel
+- Sharp LS037V7DW01 LCD Panel
+
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+---
+ drivers/video/omap2/displays/Kconfig               |   21 ++++
+ drivers/video/omap2/displays/Makefile              |    3 +
+ drivers/video/omap2/displays/panel-generic.c       |   96 +++++++++++++++++
+ .../omap2/displays/panel-samsung-lte430wq-f0c.c    |  108 +++++++++++++++++++
+ .../video/omap2/displays/panel-sharp-ls037v7dw01.c |  112 ++++++++++++++++++++
+ 5 files changed, 340 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/Kconfig
+ create mode 100644 drivers/video/omap2/displays/Makefile
+ create mode 100644 drivers/video/omap2/displays/panel-generic.c
+ create mode 100644 drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+ create mode 100644 drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+new file mode 100644
+index 0000000..0419ec8
+--- /dev/null
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -0,0 +1,21 @@
++menu "OMAP2/3 Display Device Drivers"
++        depends on OMAP2_DSS
++
++config PANEL_GENERIC
++        tristate "Generic Panel"
++        help
++	  Generic panel driver.
++	  Used for DVI output for Beagle and OMAP3 SDP.
++
++config PANEL_SAMSUNG_LTE430WQ_F0C
++        tristate "Samsung LTE430WQ-F0C LCD Panel"
++        depends on OMAP2_DSS
++        help
++          LCD Panel used on Overo Palo43
++
++config PANEL_SHARP_LS037V7DW01
++        tristate "Sharp LS037V7DW01 LCD Panel"
++        depends on OMAP2_DSS
++        help
++          LCD Panel used in TI's SDP3430 and EVM boards
++endmenu
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+new file mode 100644
+index 0000000..a26bbd2
+--- /dev/null
++++ b/drivers/video/omap2/displays/Makefile
+@@ -0,0 +1,3 @@
++obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
++obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
++obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+diff --git a/drivers/video/omap2/displays/panel-generic.c b/drivers/video/omap2/displays/panel-generic.c
+new file mode 100644
+index 0000000..8382acb
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-generic.c
+@@ -0,0 +1,96 @@
++/*
++ * Generic panel support
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <mach/display.h>
++
++static int generic_panel_init(struct omap_display *display)
++{
++	return 0;
++}
++
++static int generic_panel_enable(struct omap_display *display)
++{
++	int r = 0;
++
++	if (display->hw_config.panel_enable)
++		r = display->hw_config.panel_enable(display);
++
++	return r;
++}
++
++static void generic_panel_disable(struct omap_display *display)
++{
++	if (display->hw_config.panel_disable)
++		display->hw_config.panel_disable(display);
++}
++
++static int generic_panel_suspend(struct omap_display *display)
++{
++	generic_panel_disable(display);
++	return 0;
++}
++
++static int generic_panel_resume(struct omap_display *display)
++{
++	return generic_panel_enable(display);
++}
++
++static struct omap_panel generic_panel = {
++	.owner		= THIS_MODULE,
++	.name		= "panel-generic",
++	.init		= generic_panel_init,
++	.enable		= generic_panel_enable,
++	.disable	= generic_panel_disable,
++	.suspend	= generic_panel_suspend,
++	.resume		= generic_panel_resume,
++
++	.timings = {
++		/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
++		.x_res		= 640,
++		.y_res		= 480,
++		.pixel_clock	= 23500,
++		.hfp		= 48,
++		.hsw		= 32,
++		.hbp		= 80,
++		.vfp		= 3,
++		.vsw		= 4,
++		.vbp		= 7,
++	},
++
++	.config		= OMAP_DSS_LCD_TFT,
++};
++
++
++static int __init generic_panel_drv_init(void)
++{
++	omap_dss_register_panel(&generic_panel);
++	return 0;
++}
++
++static void __exit generic_panel_drv_exit(void)
++{
++	omap_dss_unregister_panel(&generic_panel);
++}
++
++module_init(generic_panel_drv_init);
++module_exit(generic_panel_drv_exit);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+new file mode 100644
+index 0000000..e4bb781
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c
+@@ -0,0 +1,108 @@
++/*
++ * LCD panel driver for Samsung LTE430WQ-F0C
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <mach/display.h>
++
++static int samsung_lte_panel_init(struct omap_display *display)
++{
++	return 0;
++}
++
++static void samsung_lte_panel_cleanup(struct omap_display *display)
++{
++}
++
++static int samsung_lte_panel_enable(struct omap_display *display)
++{
++	int r = 0;
++
++	/* wait couple of vsyncs until enabling the LCD */
++	msleep(50);
++
++	if (display->hw_config.panel_enable)
++		r = display->hw_config.panel_enable(display);
++
++	return r;
++}
++
++static void samsung_lte_panel_disable(struct omap_display *display)
++{
++	if (display->hw_config.panel_disable)
++		display->hw_config.panel_disable(display);
++
++	/* wait at least 5 vsyncs after disabling the LCD */
++	msleep(100);
++}
++
++static int samsung_lte_panel_suspend(struct omap_display *display)
++{
++	samsung_lte_panel_disable(display);
++	return 0;
++}
++
++static int samsung_lte_panel_resume(struct omap_display *display)
++{
++	return samsung_lte_panel_enable(display);
++}
++
++static struct omap_panel samsung_lte_panel = {
++	.owner		= THIS_MODULE,
++	.name		= "samsung-lte430wq-f0c",
++	.init		= samsung_lte_panel_init,
++	.cleanup	= samsung_lte_panel_cleanup,
++	.enable		= samsung_lte_panel_enable,
++	.disable	= samsung_lte_panel_disable,
++	.suspend	= samsung_lte_panel_suspend,
++	.resume		= samsung_lte_panel_resume,
++
++	.timings = {
++		.x_res = 480,
++		.y_res = 272,
++
++		.pixel_clock	= 9200,
++
++		.hsw		= 41,
++		.hfp		= 8,
++		.hbp		= 45-41,
++
++		.vsw		= 10,
++		.vfp		= 4,
++		.vbp		= 12-10,
++	},
++	.recommended_bpp = 16,
++	.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IVS,
++};
++
++
++static int __init samsung_lte_panel_drv_init(void)
++{
++	omap_dss_register_panel(&samsung_lte_panel);
++	return 0;
++}
++
++static void __exit samsung_lte_panel_drv_exit(void)
++{
++	omap_dss_unregister_panel(&samsung_lte_panel);
++}
++
++module_init(samsung_lte_panel_drv_init);
++module_exit(samsung_lte_panel_drv_exit);
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+new file mode 100644
+index 0000000..1f99150
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c
+@@ -0,0 +1,112 @@
++/*
++ * LCD panel driver for Sharp LS037V7DW01
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published by
++ * the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program.  If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++
++#include <mach/display.h>
++
++static int sharp_ls_panel_init(struct omap_display *display)
++{
++	return 0;
++}
++
++static void sharp_ls_panel_cleanup(struct omap_display *display)
++{
++}
++
++static int sharp_ls_panel_enable(struct omap_display *display)
++{
++	int r = 0;
++
++	/* wait couple of vsyncs until enabling the LCD */
++	msleep(50);
++
++	if (display->hw_config.panel_enable)
++		r = display->hw_config.panel_enable(display);
++
++	return r;
++}
++
++static void sharp_ls_panel_disable(struct omap_display *display)
++{
++	if (display->hw_config.panel_disable)
++		display->hw_config.panel_disable(display);
++
++	/* wait at least 5 vsyncs after disabling the LCD */
++
++	msleep(100);
++}
++
++static int sharp_ls_panel_suspend(struct omap_display *display)
++{
++	sharp_ls_panel_disable(display);
++	return 0;
++}
++
++static int sharp_ls_panel_resume(struct omap_display *display)
++{
++	return sharp_ls_panel_enable(display);
++}
++
++static struct omap_panel sharp_ls_panel = {
++	.owner		= THIS_MODULE,
++	.name		= "sharp-ls037v7dw01",
++	.init		= sharp_ls_panel_init,
++	.cleanup	= sharp_ls_panel_cleanup,
++	.enable		= sharp_ls_panel_enable,
++	.disable	= sharp_ls_panel_disable,
++	.suspend	= sharp_ls_panel_suspend,
++	.resume		= sharp_ls_panel_resume,
++
++	.timings = {
++		.x_res = 480,
++		.y_res = 640,
++
++		.pixel_clock	= 19200,
++
++		.hsw		= 2,
++		.hfp		= 1,
++		.hbp		= 28,
++
++		.vsw		= 1,
++		.vfp		= 1,
++		.vbp		= 1,
++	},
++
++	.acb		= 0x28,
++
++	.config	= OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |	OMAP_DSS_LCD_IHS,
++};
++
++
++static int __init sharp_ls_panel_drv_init(void)
++{
++	omap_dss_register_panel(&sharp_ls_panel);
++	return 0;
++}
++
++static void __exit sharp_ls_panel_drv_exit(void)
++{
++	omap_dss_unregister_panel(&sharp_ls_panel);
++}
++
++module_init(sharp_ls_panel_drv_init);
++module_exit(sharp_ls_panel_drv_exit);
++MODULE_LICENSE("GPL");
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/0008-DSS-Hacked-N810-support.patch b/recipes/linux/linux-omap-pm/dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch
index e2f21699b9..0025f1aa8b 100644
--- a/recipes/linux/linux-omap-pm/0008-DSS-Hacked-N810-support.patch
+++ b/recipes/linux/linux-omap-pm/dss2/0006-DSS2-HACK-Add-DSS2-support-for-N800.patch
@@ -1,31 +1,35 @@
-From a36dfe9ce6faa6a13bb82b3039856d8aa1528dc2 Mon Sep 17 00:00:00 2001
+From 18a25382e81c03230e022ca2eb7e0fce24479d6a Mon Sep 17 00:00:00 2001
 From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Date: Thu, 18 Dec 2008 15:37:42 +0200
-Subject: [PATCH] DSS: Hacked N810 support
+Date: Thu, 2 Apr 2009 10:31:57 +0300
+Subject: [PATCH] DSS2: HACK: Add DSS2 support for N800
 
+Works, but it an ugly quick hack.
+
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
 ---
- arch/arm/mach-omap2/board-n800.c    |  214 ++++++++++++++---
- drivers/video/omap2/Kconfig         |   10 +
- drivers/video/omap2/Makefile        |    3 +
- drivers/video/omap2/ctrl-blizzard.c |  279 ++++++++++++++++++++++
- drivers/video/omap2/panel-n800.c    |  437 +++++++++++++++++++++++++++++++++++
+ arch/arm/mach-omap2/board-n800.c             |  216 +++++++++++---
+ drivers/video/omap2/displays/Kconfig         |   10 +
+ drivers/video/omap2/displays/Makefile        |    3 +
+ drivers/video/omap2/displays/ctrl-blizzard.c |  279 +++++++++++++++++
+ drivers/video/omap2/displays/panel-n800.c    |  435 ++++++++++++++++++++++++++
  5 files changed, 905 insertions(+), 38 deletions(-)
- create mode 100644 drivers/video/omap2/ctrl-blizzard.c
- create mode 100644 drivers/video/omap2/panel-n800.c
+ create mode 100644 drivers/video/omap2/displays/ctrl-blizzard.c
+ create mode 100644 drivers/video/omap2/displays/panel-n800.c
 
 diff --git a/arch/arm/mach-omap2/board-n800.c b/arch/arm/mach-omap2/board-n800.c
-index b38b295..ffa5aad 100644
+index f6f6571..6de60ae 100644
 --- a/arch/arm/mach-omap2/board-n800.c
 +++ b/arch/arm/mach-omap2/board-n800.c
-@@ -40,6 +40,7 @@
+@@ -41,6 +41,8 @@
+ #include <mach/clock.h>
  #include <mach/gpio-switch.h>
- #include <mach/omapfb.h>
  #include <mach/blizzard.h>
 +#include <mach/display.h>
++#include <mach/vram.h>
  
  #include <../drivers/cbus/tahvo.h>
  #include <../drivers/media/video/tcm825x.h>
-@@ -156,23 +157,175 @@ static struct omap_uart_config n800_uart_config __initdata = {
+@@ -161,23 +163,176 @@ static struct omap_uart_config n800_uart_config __initdata = {
  
  #include "../../../drivers/cbus/retu.h"
  
@@ -119,7 +123,7 @@ index b38b295..ffa5aad 100644
 +	return 0;
 +}
 +
-+static struct omap_display_data n800_dsi_display_data = {
++static struct omap_dss_display_config n800_dsi_display_data = {
 +	.type = OMAP_DISPLAY_TYPE_DBI,
 +	.name = "lcd",
 +	.ctrl_name = "ctrl-blizzard",
@@ -136,9 +140,9 @@ index b38b295..ffa5aad 100644
 +		/* 8 for cmd mode, 16 for pixel data. ctrl-blizzard handles switching */
 +		.data_lines = 8,
 +	},
-+	.priv = 0, // XXX used for panel datalines
++	.panel_data = 0, // XXX used for panel datalines
 +};
-+static struct omap_dss_platform_data n800_dss_data = {
++static struct omap_dss_board_info n800_dss_data = {
 +	.num_displays = 1,
 +	.displays = {
 +		&n800_dsi_display_data,
@@ -149,7 +153,7 @@ index b38b295..ffa5aad 100644
 -	.tmp105_irq_pin = 125,
 -	.set_power = n800_tmp105_set_power,
 +static struct platform_device n800_dss_device = {
-+	.name          = "omap-dss",
++	.name          = "omapdss",
 +	.id            = -1,
 +	.dev            = {
 +		.platform_data = &n800_dss_data,
@@ -164,7 +168,8 @@ index b38b295..ffa5aad 100644
 +	conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
 +	if (conf != NULL) {
 +		n800_dsi_display_data.panel_reset_gpio = conf->nreset_gpio;
-+		n800_dsi_display_data.priv = (void*)(u32)conf->data_lines; // XXX
++		n800_dsi_display_data.panel_data =
++			(void*)(u32)conf->data_lines; // XXX
 +		//printk("\n\nTULI %d\n\n", conf->data_lines);
 +	} else {
 +		printk("\n\nEI TULLU MIOTÄÄÄ\n\n");
@@ -211,7 +216,7 @@ index b38b295..ffa5aad 100644
  static void mipid_shutdown(struct mipid_platform_data *pdata)
  {
  	if (pdata->nreset_gpio != -1) {
-@@ -186,6 +339,7 @@ static struct mipid_platform_data n800_mipid_platform_data = {
+@@ -191,6 +346,7 @@ static struct mipid_platform_data n800_mipid_platform_data = {
  	.shutdown = mipid_shutdown,
  };
  
@@ -219,7 +224,7 @@ index b38b295..ffa5aad 100644
  static void __init mipid_dev_init(void)
  {
  	const struct omap_lcd_config *conf;
-@@ -196,26 +350,9 @@ static void __init mipid_dev_init(void)
+@@ -201,26 +357,9 @@ static void __init mipid_dev_init(void)
  		n800_mipid_platform_data.data_lines = conf->data_lines;
  	}
  }
@@ -248,7 +253,7 @@ index b38b295..ffa5aad 100644
  static void blizzard_enable_clocks(int enable)
  {
  	if (enable)
-@@ -260,14 +397,12 @@ static void __init blizzard_dev_init(void)
+@@ -265,14 +404,12 @@ static void __init blizzard_dev_init(void)
  	gpio_direction_output(N800_BLIZZARD_POWERDOWN_GPIO, 1);
  
  	blizzard_get_clocks();
@@ -265,7 +270,7 @@ index b38b295..ffa5aad 100644
  	{ OMAP_TAG_TMP105,			&n800_tmp105_config },
  };
  
-@@ -374,7 +509,7 @@ static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
+@@ -379,7 +516,7 @@ static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
  
  static struct spi_board_info n800_spi_board_info[] __initdata = {
  	{
@@ -274,7 +279,7 @@ index b38b295..ffa5aad 100644
  		.bus_num	= 1,
  		.chip_select	= 1,
  		.max_speed_hz	= 4000000,
-@@ -399,7 +534,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
+@@ -404,7 +541,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
  
  static struct spi_board_info n810_spi_board_info[] __initdata = {
  	{
@@ -283,15 +288,15 @@ index b38b295..ffa5aad 100644
  		.bus_num	 = 1,
  		.chip_select	 = 1,
  		.max_speed_hz	 = 4000000,
-@@ -567,6 +702,7 @@ static struct platform_device *n800_devices[] __initdata = {
- #if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
- 	&n800_keypad_led_device,
+@@ -582,6 +719,7 @@ static struct platform_device *n800_devices[] __initdata = {
+ #if defined(CONFIG_CBUS_RETU_HEADSET)
+ 	&retu_headset_device,
  #endif
 +	&n800_dss_device,
  };
  
  #ifdef CONFIG_MENELAUS
-@@ -689,9 +825,10 @@ void __init nokia_n800_common_init(void)
+@@ -713,9 +851,10 @@ void __init nokia_n800_common_init(void)
  	if (machine_is_nokia_n810())
  		i2c_register_board_info(2, n810_i2c_board_info_2,
  			ARRAY_SIZE(n810_i2c_board_info_2));
@@ -305,7 +310,7 @@ index b38b295..ffa5aad 100644
  }
  
  static void __init nokia_n800_init(void)
-@@ -712,6 +849,7 @@ void __init nokia_n800_map_io(void)
+@@ -735,6 +874,7 @@ void __init nokia_n800_map_io(void)
  	omap_board_config_size = ARRAY_SIZE(n800_config);
  
  	omap2_set_globals_242x();
@@ -313,41 +318,41 @@ index b38b295..ffa5aad 100644
  	omap2_map_common_io();
  }
  
-diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
-index b54c955..4e9211e 100644
---- a/drivers/video/omap2/Kconfig
-+++ b/drivers/video/omap2/Kconfig
-@@ -49,4 +49,14 @@ config PANEL_SHARP_LS037V7DW01
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+index 0419ec8..356ceb1 100644
+--- a/drivers/video/omap2/displays/Kconfig
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -18,4 +18,14 @@ config PANEL_SHARP_LS037V7DW01
+         depends on OMAP2_DSS
          help
            LCD Panel used in TI's SDP3430 and EVM boards
- 
++
 +config PANEL_N800
-+        tristate "panel n800"
++        tristate "Panel N8x0"
 +        help
-+          N800 LCD
++          N8x0 LCD (hack)
 +
 +config CTRL_BLIZZARD
-+        tristate "blizzard ctrl"
++        tristate "Blizzard Controller"
 +        help
-+          Blizzard Ctrl
-+
++          Blizzard Controller (hack)
  endmenu
-diff --git a/drivers/video/omap2/Makefile b/drivers/video/omap2/Makefile
-index fe6858e..7727f9c 100644
---- a/drivers/video/omap2/Makefile
-+++ b/drivers/video/omap2/Makefile
-@@ -3,3 +3,6 @@ omapfb-y := omapfb-main.o omapfb-sysfs.o omapfb-ioctl.o
- 
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+index a26bbd2..1b74b7e 100644
+--- a/drivers/video/omap2/displays/Makefile
++++ b/drivers/video/omap2/displays/Makefile
+@@ -1,3 +1,6 @@
  obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
+ obj-$(CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C) += panel-samsung-lte430wq-f0c.o
  obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 +
 +obj-$(CONFIG_CTRL_BLIZZARD) += ctrl-blizzard.o
 +obj-$(CONFIG_PANEL_N800) += panel-n800.o
-diff --git a/drivers/video/omap2/ctrl-blizzard.c b/drivers/video/omap2/ctrl-blizzard.c
+diff --git a/drivers/video/omap2/displays/ctrl-blizzard.c b/drivers/video/omap2/displays/ctrl-blizzard.c
 new file mode 100644
-index 0000000..e1e5569
+index 0000000..6698e4d
 --- /dev/null
-+++ b/drivers/video/omap2/ctrl-blizzard.c
++++ b/drivers/video/omap2/displays/ctrl-blizzard.c
 @@ -0,0 +1,279 @@
 +
 +//#define DEBUG
@@ -507,7 +512,7 @@ index 0000000..e1e5569
 +int rfbi_configure(int rfbi_module, int bpp, int lines);
 +
 +static void blizzard_ctrl_setup_update(struct omap_display *display,
-+				    int x, int y, int w, int h)
++				    u16 x, u16 y, u16 w, u16 h)
 +{
 +	u8 tmp[18];
 +	int x_end, y_end;
@@ -556,17 +561,17 @@ index 0000000..e1e5569
 +		       16);
 +}
 +
-+static int blizzard_ctrl_enable_te(struct omap_display *display, int enable)
++static int blizzard_ctrl_enable_te(struct omap_display *display, bool enable)
 +{
 +	return 0;
 +}
 +
-+static int blizzard_ctrl_rotate(struct omap_display *display, int rotate)
++static int blizzard_ctrl_rotate(struct omap_display *display, u8 rotate)
 +{
 +	return 0;
 +}
 +
-+static int blizzard_ctrl_mirror(struct omap_display *display, int enable)
++static int blizzard_ctrl_mirror(struct omap_display *display, bool enable)
 +{
 +	return 0;
 +}
@@ -584,8 +589,8 @@ index 0000000..e1e5569
 +	.disable = blizzard_ctrl_disable,
 +	.setup_update = blizzard_ctrl_setup_update,
 +	.enable_te = blizzard_ctrl_enable_te,
-+	.rotate = blizzard_ctrl_rotate,
-+	.mirror = blizzard_ctrl_mirror,
++	.set_rotate = blizzard_ctrl_rotate,
++	.set_mirror = blizzard_ctrl_mirror,
 +	.run_test = blizzard_run_test,
 +	.pixel_size = 16,
 +
@@ -628,12 +633,12 @@ index 0000000..e1e5569
 +MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
 +MODULE_DESCRIPTION("Blizzard Driver");
 +MODULE_LICENSE("GPL");
-diff --git a/drivers/video/omap2/panel-n800.c b/drivers/video/omap2/panel-n800.c
+diff --git a/drivers/video/omap2/displays/panel-n800.c b/drivers/video/omap2/displays/panel-n800.c
 new file mode 100644
-index 0000000..3ae0a16
+index 0000000..91d3e37
 --- /dev/null
-+++ b/drivers/video/omap2/panel-n800.c
-@@ -0,0 +1,437 @@
++++ b/drivers/video/omap2/displays/panel-n800.c
+@@ -0,0 +1,435 @@
 +
 +/*#define DEBUG*/
 +
@@ -791,7 +796,7 @@ index 0000000..3ae0a16
 +
 +	pn800_write(md, 0xc2, (u8 *)initpar, sizeof(initpar));
 +
-+	data_lines = (int)md->display->hw_config.priv; // XXX
++	data_lines = (int)md->display->hw_config.panel_data; // XXX
 +
 +	set_data_lines(md, data_lines);
 +}
@@ -1002,8 +1007,6 @@ index 0000000..3ae0a16
 +		.vbp		= 3,
 +	},
 +	.config		= OMAP_DSS_LCD_TFT,
-+
-+	.bpp = 16,
 +};
 +
 +static int pn800_spi_probe(struct spi_device *spi)
@@ -1072,5 +1075,5 @@ index 0000000..3ae0a16
 +MODULE_DESCRIPTION("N800 LCD Driver");
 +MODULE_LICENSE("GPL");
 -- 
-1.5.6.3
+1.5.6.5
 
diff --git a/recipes/linux/linux-omap-pm/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch b/recipes/linux/linux-omap-pm/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch
new file mode 100644
index 0000000000..62d653700e
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0007-DSS2-Add-DSS2-support-for-SDP-Beagle-Overo-EVM.patch
@@ -0,0 +1,5691 @@
+From 9292aae93419867b9d0fce5cf3b2697e9250f5b5 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 10:36:05 +0300
+Subject: [PATCH] DSS2: Add DSS2 support for SDP, Beagle, Overo, EVM
+
+Also custom dss_*_defconfigs as an example.
+
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+---
+ arch/arm/configs/dss_omap3_beagle_defconfig | 1371 ++++++++++++++++++++
+ arch/arm/configs/dss_omap_3430sdp_defconfig | 1634 +++++++++++++++++++++++
+ arch/arm/configs/dss_overo_defconfig        | 1862 +++++++++++++++++++++++++++
+ arch/arm/mach-omap2/board-3430sdp.c         |  227 ++++-
+ arch/arm/mach-omap2/board-omap3beagle.c     |   95 ++-
+ arch/arm/mach-omap2/board-omap3evm.c        |  217 +++-
+ arch/arm/mach-omap2/board-overo.c           |   98 ++-
+ 7 files changed, 5475 insertions(+), 29 deletions(-)
+ create mode 100644 arch/arm/configs/dss_omap3_beagle_defconfig
+ create mode 100644 arch/arm/configs/dss_omap_3430sdp_defconfig
+ create mode 100644 arch/arm/configs/dss_overo_defconfig
+
+diff --git a/arch/arm/configs/dss_omap3_beagle_defconfig b/arch/arm/configs/dss_omap3_beagle_defconfig
+new file mode 100644
+index 0000000..7143168
+--- /dev/null
++++ b/arch/arm/configs/dss_omap3_beagle_defconfig
+@@ -0,0 +1,1371 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.29-omap1
++# Thu Apr  2 11:24:09 2009
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++# CONFIG_FREEZER is not set
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++CONFIG_ARCH_OMAP=y
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_W90X900 is not set
++
++#
++# TI OMAP Implementations
++#
++CONFIG_ARCH_OMAP_OTG=y
++# CONFIG_ARCH_OMAP1 is not set
++# CONFIG_ARCH_OMAP2 is not set
++CONFIG_ARCH_OMAP3=y
++
++#
++# OMAP Feature Selections
++#
++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
++# CONFIG_OMAP_SMARTREFLEX is not set
++# CONFIG_OMAP_RESET_CLOCKS is not set
++CONFIG_OMAP_BOOT_TAG=y
++CONFIG_OMAP_BOOT_REASON=y
++# CONFIG_OMAP_COMPONENT_VERSION is not set
++# CONFIG_OMAP_GPIO_SWITCH is not set
++# CONFIG_OMAP_MUX is not set
++# CONFIG_OMAP_MCBSP is not set
++# CONFIG_OMAP_MBOX_FWK is not set
++# CONFIG_OMAP_MPU_TIMER is not set
++CONFIG_OMAP_32K_TIMER=y
++CONFIG_OMAP_32K_TIMER_HZ=128
++CONFIG_OMAP_TICK_GPTIMER=12
++CONFIG_OMAP_DM_TIMER=y
++# CONFIG_OMAP_LL_DEBUG_UART1 is not set
++# CONFIG_OMAP_LL_DEBUG_UART2 is not set
++CONFIG_OMAP_LL_DEBUG_UART3=y
++CONFIG_ARCH_OMAP34XX=y
++CONFIG_ARCH_OMAP3430=y
++
++#
++# OMAP Board Type
++#
++# CONFIG_MACH_NOKIA_RX51 is not set
++# CONFIG_MACH_OMAP_LDP is not set
++# CONFIG_MACH_OMAP_3430SDP is not set
++# CONFIG_MACH_OMAP3EVM is not set
++CONFIG_MACH_OMAP3_BEAGLE=y
++# CONFIG_MACH_OVERO is not set
++# CONFIG_MACH_OMAP3_PANDORA is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_32v6K=y
++CONFIG_CPU_V7=y
++CONFIG_CPU_32v7=y
++CONFIG_CPU_ABRT_EV7=y
++CONFIG_CPU_PABRT_IFAR=y
++CONFIG_CPU_CACHE_V7=y
++CONFIG_CPU_CACHE_VIPT=y
++CONFIG_CPU_COPY_V6=y
++CONFIG_CPU_TLB_V7=y
++CONFIG_CPU_HAS_ASID=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_ARM_THUMBEE is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_BPREDICT_DISABLE is not set
++CONFIG_HAS_TLS_REG=y
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=128
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++CONFIG_ARCH_FLATMEM_HAS_HOLES=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_UNEVICTABLE_LRU=y
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.2.14:/tftpboot/rootfs ip=192.168.2.15 nolock,rsize=1024,wsize=1024 rw"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++CONFIG_VFP=y
++CONFIG_VFPv3=y
++# CONFIG_NEON is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++CONFIG_BINFMT_MISC=y
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++# CONFIG_SUSPEND is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_COMPAT_NET_DEV_OPS=y
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++# CONFIG_PHONET is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++CONFIG_WIRELESS_OLD_REGULATORY=y
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_LIB80211 is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_TESTS is not set
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_OMAP2=y
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=16384
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_LIBFC is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=32
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_HELPER_AUTO=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++CONFIG_I2C_OMAP=y
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TWL4030_MADC is not set
++# CONFIG_TWL4030_POWEROFF is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++# CONFIG_SPI is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++CONFIG_GPIO_TWL4030=y
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++# CONFIG_WATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
++CONFIG_TWL4030_CORE=y
++# CONFIG_TWL4030_POWER is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_PCF50633 is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++CONFIG_DAB=y
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=m
++CONFIG_FB_CFB_COPYAREA=m
++CONFIG_FB_CFB_IMAGEBLIT=m
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
++CONFIG_OMAP2_DSS=m
++CONFIG_OMAP2_DSS_VRAM_SIZE=12
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++# CONFIG_OMAP2_DSS_SDI is not set
++# CONFIG_OMAP2_DSS_DSI is not set
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=m
++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
++# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
++# CONFIG_PANEL_N800 is not set
++# CONFIG_CTRL_BLIZZARD is not set
++CONFIG_FB_OMAP2=m
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++# CONFIG_HID_SUPPORT is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_SOC=y
++
++#
++# OMAP 343x high speed USB support
++#
++# CONFIG_USB_MUSB_HOST is not set
++CONFIG_USB_MUSB_PERIPHERAL=y
++# CONFIG_USB_MUSB_OTG is not set
++CONFIG_USB_GADGET_MUSB_HDRC=y
++# CONFIG_MUSB_PIO_ONLY is not set
++CONFIG_USB_INVENTRA_DMA=y
++# CONFIG_USB_TI_CPPI_DMA is not set
++# CONFIG_USB_MUSB_DEBUG is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_IMX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++
++#
++# OTG and related infrastructure
++#
++CONFIG_USB_OTG_UTILS=y
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_ISP1301_OMAP is not set
++CONFIG_TWL4030_USB=y
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_OMAP_HS=y
++# CONFIG_MEMSTICK is not set
++# CONFIG_ACCESSIBILITY is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++CONFIG_RTC_DRV_TWL4030=y
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++
++#
++# SPI RTC drivers
++#
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++# CONFIG_REGULATOR_BQ24022 is not set
++CONFIG_REGULATOR_TWL4030=y
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# CBUS support
++#
++# CONFIG_CBUS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QUOTA_NETLINK_INTERFACE is not set
++CONFIG_PRINT_QUOTA_WARNING=y
++CONFIG_QUOTA_TREE=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_REGISTER_V4 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++
++#
++# Tracers
++#
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_CONTEXT_SWITCH_TRACER is not set
++# CONFIG_BOOT_TRACER is not set
++# CONFIG_TRACE_BRANCH_PROFILING is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++CONFIG_CRYPTO_CRC32C=y
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/arm/configs/dss_omap_3430sdp_defconfig b/arch/arm/configs/dss_omap_3430sdp_defconfig
+new file mode 100644
+index 0000000..dc30dce
+--- /dev/null
++++ b/arch/arm/configs/dss_omap_3430sdp_defconfig
+@@ -0,0 +1,1634 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.29-omap1
++# Thu Apr  2 11:11:24 2009
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_COMPAT_BRK=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++CONFIG_ARCH_OMAP=y
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_W90X900 is not set
++
++#
++# TI OMAP Implementations
++#
++CONFIG_ARCH_OMAP_OTG=y
++# CONFIG_ARCH_OMAP1 is not set
++# CONFIG_ARCH_OMAP2 is not set
++CONFIG_ARCH_OMAP3=y
++
++#
++# OMAP Feature Selections
++#
++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
++CONFIG_OMAP_SMARTREFLEX=y
++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
++CONFIG_OMAP_RESET_CLOCKS=y
++CONFIG_OMAP_BOOT_TAG=y
++CONFIG_OMAP_BOOT_REASON=y
++# CONFIG_OMAP_COMPONENT_VERSION is not set
++# CONFIG_OMAP_GPIO_SWITCH is not set
++CONFIG_OMAP_MUX=y
++CONFIG_OMAP_MUX_DEBUG=y
++CONFIG_OMAP_MUX_WARNINGS=y
++# CONFIG_OMAP_MCBSP is not set
++# CONFIG_OMAP_MBOX_FWK is not set
++# CONFIG_OMAP_MPU_TIMER is not set
++CONFIG_OMAP_32K_TIMER=y
++CONFIG_OMAP_32K_TIMER_HZ=128
++CONFIG_OMAP_TICK_GPTIMER=1
++CONFIG_OMAP_DM_TIMER=y
++CONFIG_OMAP_LL_DEBUG_UART1=y
++# CONFIG_OMAP_LL_DEBUG_UART2 is not set
++# CONFIG_OMAP_LL_DEBUG_UART3 is not set
++CONFIG_OMAP_SERIAL_WAKE=y
++CONFIG_ARCH_OMAP34XX=y
++CONFIG_ARCH_OMAP3430=y
++
++#
++# OMAP Board Type
++#
++# CONFIG_MACH_NOKIA_RX51 is not set
++# CONFIG_MACH_OMAP_LDP is not set
++CONFIG_MACH_OMAP_3430SDP=y
++# CONFIG_MACH_OMAP3EVM is not set
++# CONFIG_MACH_OMAP3_BEAGLE is not set
++# CONFIG_MACH_OVERO is not set
++# CONFIG_MACH_OMAP3_PANDORA is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_32v6K=y
++CONFIG_CPU_V7=y
++CONFIG_CPU_32v7=y
++CONFIG_CPU_ABRT_EV7=y
++CONFIG_CPU_PABRT_IFAR=y
++CONFIG_CPU_CACHE_V7=y
++CONFIG_CPU_CACHE_VIPT=y
++CONFIG_CPU_COPY_V6=y
++CONFIG_CPU_TLB_V7=y
++CONFIG_CPU_HAS_ASID=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_ARM_THUMBEE is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_BPREDICT_DISABLE is not set
++CONFIG_HAS_TLS_REG=y
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=128
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++CONFIG_ARCH_FLATMEM_HAS_HOLES=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_UNEVICTABLE_LRU=y
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++CONFIG_VFP=y
++CONFIG_VFPv3=y
++# CONFIG_NEON is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++CONFIG_BINFMT_MISC=y
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_COMPAT_NET_DEV_OPS=y
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++# CONFIG_PHONET is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++CONFIG_WIRELESS_OLD_REGULATORY=y
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_LIB80211 is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_TESTS is not set
++# CONFIG_MTD_REDBOOT_PARTS is not set
++CONFIG_MTD_CMDLINE_PARTS=y
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++CONFIG_MTD_CFI=y
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_GEN_PROBE=y
++# CONFIG_MTD_CFI_ADV_OPTIONS is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++CONFIG_MTD_CFI_INTELEXT=y
++# CONFIG_MTD_CFI_AMDSTD is not set
++# CONFIG_MTD_CFI_STAA is not set
++CONFIG_MTD_CFI_UTIL=y
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PHYSMAP is not set
++# CONFIG_MTD_ARM_INTEGRATOR is not set
++CONFIG_MTD_OMAP_NOR=y
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++CONFIG_MTD_NAND_ECC_SMC=y
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_OMAP2=y
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ALAUDA is not set
++CONFIG_MTD_ONENAND=y
++CONFIG_MTD_ONENAND_VERIFY_WRITE=y
++# CONFIG_MTD_ONENAND_GENERIC is not set
++CONFIG_MTD_ONENAND_OMAP2=y
++# CONFIG_MTD_ONENAND_OTP is not set
++# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
++# CONFIG_MTD_ONENAND_SIM is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++# CONFIG_BLK_DEV_UB is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=16384
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ICS932S401 is not set
++# CONFIG_OMAP_STI is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_AT25 is not set
++# CONFIG_EEPROM_LEGACY is not set
++# CONFIG_EEPROM_93CX6 is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_LIBFC is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_PHYLIB is not set
++CONFIG_NET_ETHERNET=y
++CONFIG_MII=y
++# CONFIG_AX88796 is not set
++CONFIG_SMC91X=y
++# CONFIG_DM9000 is not set
++# CONFIG_ENC28J60 is not set
++# CONFIG_SMC911X is not set
++# CONFIG_SMSC911X is not set
++# CONFIG_DNET is not set
++# CONFIG_IBM_NEW_EMAC_ZMII is not set
++# CONFIG_IBM_NEW_EMAC_RGMII is not set
++# CONFIG_IBM_NEW_EMAC_TAH is not set
++# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
++# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
++# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
++# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
++# CONFIG_B44 is not set
++CONFIG_NETDEV_1000=y
++CONFIG_NETDEV_10000=y
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++
++#
++# USB Network Adapters
++#
++# CONFIG_USB_CATC is not set
++# CONFIG_USB_KAWETH is not set
++# CONFIG_USB_PEGASUS is not set
++# CONFIG_USB_RTL8150 is not set
++# CONFIG_USB_USBNET is not set
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++CONFIG_KEYBOARD_TWL4030=y
++# CONFIG_KEYBOARD_GPIO is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++CONFIG_INPUT_TOUCHSCREEN=y
++CONFIG_TOUCHSCREEN_ADS7846=y
++# CONFIG_TOUCHSCREEN_FUJITSU is not set
++# CONFIG_TOUCHSCREEN_GUNZE is not set
++# CONFIG_TOUCHSCREEN_ELO is not set
++# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
++# CONFIG_TOUCHSCREEN_MTOUCH is not set
++# CONFIG_TOUCHSCREEN_INEXIO is not set
++# CONFIG_TOUCHSCREEN_MK712 is not set
++# CONFIG_TOUCHSCREEN_PENMOUNT is not set
++# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
++# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
++# CONFIG_TOUCHSCREEN_TSC2005 is not set
++# CONFIG_TOUCHSCREEN_TSC210X is not set
++# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
++# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
++# CONFIG_TOUCHSCREEN_TSC2007 is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=32
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_HELPER_AUTO=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++CONFIG_I2C_OMAP=y
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++# CONFIG_I2C_TINY_USB is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++# CONFIG_TWL4030_MADC is not set
++# CONFIG_TWL4030_POWEROFF is not set
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++CONFIG_SPI_OMAP24XX=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_TSC210X is not set
++# CONFIG_SPI_TSC2301 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++# CONFIG_DEBUG_GPIO is not set
++# CONFIG_GPIO_SYSFS is not set
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++CONFIG_GPIO_TWL4030=y
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++# CONFIG_POWER_SUPPLY is not set
++# CONFIG_HWMON is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_OMAP_WATCHDOG=y
++
++#
++# USB-based Watchdog Cards
++#
++# CONFIG_USBPCWATCHDOG is not set
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
++CONFIG_TWL4030_CORE=y
++# CONFIG_TWL4030_POWER is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_PCF50633 is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++# CONFIG_VIDEO_DEV is not set
++# CONFIG_DVB_CORE is not set
++# CONFIG_VIDEO_MEDIA is not set
++
++#
++# Multimedia drivers
++#
++CONFIG_DAB=y
++# CONFIG_USB_DABUSB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++CONFIG_VIDEO_OUTPUT_CONTROL=m
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=m
++CONFIG_FB_CFB_COPYAREA=m
++CONFIG_FB_CFB_IMAGEBLIT=m
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_OMAP_LCD_VGA is not set
++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
++CONFIG_OMAP2_DSS=m
++CONFIG_OMAP2_DSS_VRAM_SIZE=8
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++# CONFIG_OMAP2_DSS_SDI is not set
++# CONFIG_OMAP2_DSS_DSI is not set
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=m
++# CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C is not set
++CONFIG_PANEL_SHARP_LS037V7DW01=m
++# CONFIG_PANEL_N800 is not set
++# CONFIG_CTRL_BLIZZARD is not set
++CONFIG_FB_OMAP2=m
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++# CONFIG_DISPLAY_SUPPORT is not set
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++# CONFIG_SOUND is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++# CONFIG_HID_DEBUG is not set
++# CONFIG_HIDRAW is not set
++
++#
++# USB Input Devices
++#
++CONFIG_USB_HID=y
++# CONFIG_HID_PID is not set
++# CONFIG_USB_HIDDEV is not set
++
++#
++# Special HID drivers
++#
++CONFIG_HID_COMPAT=y
++# CONFIG_HID_A4TECH is not set
++# CONFIG_HID_APPLE is not set
++# CONFIG_HID_BELKIN is not set
++# CONFIG_HID_CHERRY is not set
++# CONFIG_HID_CHICONY is not set
++# CONFIG_HID_CYPRESS is not set
++# CONFIG_HID_EZKEY is not set
++# CONFIG_HID_GYRATION is not set
++# CONFIG_HID_LOGITECH is not set
++# CONFIG_HID_MICROSOFT is not set
++# CONFIG_HID_MONTEREY is not set
++# CONFIG_HID_NTRIG is not set
++# CONFIG_HID_PANTHERLORD is not set
++# CONFIG_HID_PETALYNX is not set
++# CONFIG_HID_SAMSUNG is not set
++# CONFIG_HID_SONY is not set
++# CONFIG_HID_SUNPLUS is not set
++# CONFIG_GREENASIA_FF is not set
++# CONFIG_HID_TOPSEED is not set
++# CONFIG_THRUSTMASTER_FF is not set
++# CONFIG_ZEROPLUS_FF is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++CONFIG_USB=y
++CONFIG_USB_DEBUG=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++
++#
++# Miscellaneous USB options
++#
++CONFIG_USB_DEVICEFS=y
++# CONFIG_USB_DEVICE_CLASS is not set
++# CONFIG_USB_DYNAMIC_MINORS is not set
++CONFIG_USB_SUSPEND=y
++CONFIG_USB_OTG=y
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++CONFIG_USB_MON=y
++# CONFIG_USB_WUSB is not set
++# CONFIG_USB_WUSB_CBAF is not set
++
++#
++# USB Host Controller Drivers
++#
++# CONFIG_USB_C67X00_HCD is not set
++CONFIG_USB_EHCI_HCD=m
++CONFIG_OMAP_EHCI_PHY_MODE=y
++# CONFIG_OMAP_EHCI_TLL_MODE is not set
++# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
++# CONFIG_USB_EHCI_TT_NEWSCHED is not set
++# CONFIG_USB_OXU210HP_HCD is not set
++# CONFIG_USB_ISP116X_HCD is not set
++# CONFIG_USB_OHCI_HCD is not set
++# CONFIG_USB_SL811_HCD is not set
++# CONFIG_USB_R8A66597_HCD is not set
++# CONFIG_USB_HWA_HCD is not set
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_SOC=y
++
++#
++# OMAP 343x high speed USB support
++#
++# CONFIG_USB_MUSB_HOST is not set
++# CONFIG_USB_MUSB_PERIPHERAL is not set
++CONFIG_USB_MUSB_OTG=y
++CONFIG_USB_GADGET_MUSB_HDRC=y
++CONFIG_USB_MUSB_HDRC_HCD=y
++# CONFIG_MUSB_PIO_ONLY is not set
++CONFIG_USB_INVENTRA_DMA=y
++# CONFIG_USB_TI_CPPI_DMA is not set
++# CONFIG_USB_MUSB_DEBUG is not set
++
++#
++# USB Device Class drivers
++#
++# CONFIG_USB_ACM is not set
++# CONFIG_USB_PRINTER is not set
++# CONFIG_USB_WDM is not set
++# CONFIG_USB_TMC is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++#
++
++#
++# see USB_STORAGE Help for more information
++#
++CONFIG_USB_STORAGE=y
++CONFIG_USB_STORAGE_DEBUG=y
++# CONFIG_USB_STORAGE_DATAFAB is not set
++# CONFIG_USB_STORAGE_FREECOM is not set
++# CONFIG_USB_STORAGE_ISD200 is not set
++# CONFIG_USB_STORAGE_USBAT is not set
++# CONFIG_USB_STORAGE_SDDR09 is not set
++# CONFIG_USB_STORAGE_SDDR55 is not set
++# CONFIG_USB_STORAGE_JUMPSHOT is not set
++# CONFIG_USB_STORAGE_ALAUDA is not set
++# CONFIG_USB_STORAGE_ONETOUCH is not set
++# CONFIG_USB_STORAGE_KARMA is not set
++# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
++# CONFIG_USB_LIBUSUAL is not set
++
++#
++# USB Imaging devices
++#
++# CONFIG_USB_MDC800 is not set
++# CONFIG_USB_MICROTEK is not set
++
++#
++# USB port drivers
++#
++# CONFIG_USB_SERIAL is not set
++
++#
++# USB Miscellaneous drivers
++#
++# CONFIG_USB_EMI62 is not set
++# CONFIG_USB_EMI26 is not set
++# CONFIG_USB_ADUTUX is not set
++# CONFIG_USB_SEVSEG is not set
++# CONFIG_USB_RIO500 is not set
++# CONFIG_USB_LEGOTOWER is not set
++# CONFIG_USB_LCD is not set
++# CONFIG_USB_BERRY_CHARGE is not set
++# CONFIG_USB_LED is not set
++# CONFIG_USB_CYPRESS_CY7C63 is not set
++# CONFIG_USB_CYTHERM is not set
++# CONFIG_USB_PHIDGET is not set
++# CONFIG_USB_IDMOUSE is not set
++# CONFIG_USB_FTDI_ELAN is not set
++# CONFIG_USB_APPLEDISPLAY is not set
++# CONFIG_USB_SISUSBVGA is not set
++# CONFIG_USB_LD is not set
++# CONFIG_USB_TRANCEVIBRATOR is not set
++# CONFIG_USB_IOWARRIOR is not set
++CONFIG_USB_TEST=y
++# CONFIG_USB_ISIGHTFW is not set
++# CONFIG_USB_VST is not set
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_DEBUG=y
++CONFIG_USB_GADGET_DEBUG_FILES=y
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_IMX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++CONFIG_USB_ZERO=m
++# CONFIG_USB_ZERO_HNPTEST is not set
++# CONFIG_USB_ETH is not set
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++
++#
++# OTG and related infrastructure
++#
++CONFIG_USB_OTG_UTILS=y
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_ISP1301_OMAP is not set
++CONFIG_TWL4030_USB=y
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++# CONFIG_MMC_UNSAFE_RESUME is not set
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++# CONFIG_SDIO_UART is not set
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_OMAP_HS=m
++# CONFIG_MMC_SPI is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_ACCESSIBILITY is not set
++# CONFIG_NEW_LEDS is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++CONFIG_RTC_DRV_TWL4030=y
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++# CONFIG_REGULATOR_BQ24022 is not set
++CONFIG_REGULATOR_TWL4030=y
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# CBUS support
++#
++# CONFIG_CBUS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++# CONFIG_FS_POSIX_ACL is not set
++CONFIG_FILE_LOCKING=y
++# CONFIG_XFS_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QUOTA_NETLINK_INTERFACE is not set
++CONFIG_PRINT_QUOTA_WARNING=y
++CONFIG_QUOTA_TREE=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++# CONFIG_FUSE_FS is not set
++
++#
++# CD-ROM/DVD Filesystems
++#
++# CONFIG_ISO9660_FS is not set
++# CONFIG_UDF_FS is not set
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++# CONFIG_JFFS2_SUMMARY is not set
++# CONFIG_JFFS2_FS_XATTR is not set
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_JFFS2_ZLIB=y
++# CONFIG_JFFS2_LZO is not set
++CONFIG_JFFS2_RTIME=y
++# CONFIG_JFFS2_RUBIN is not set
++# CONFIG_JFFS2_CMODE_NONE is not set
++CONFIG_JFFS2_CMODE_PRIORITY=y
++# CONFIG_JFFS2_CMODE_SIZE is not set
++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_REGISTER_V4 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++# CONFIG_SCHEDSTATS is not set
++# CONFIG_TIMER_STATS is not set
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_DEBUG_SLAB is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++CONFIG_DEBUG_INFO=y
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++CONFIG_HAVE_FUNCTION_TRACER=y
++
++#
++# Tracers
++#
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_CONTEXT_SWITCH_TRACER is not set
++# CONFIG_BOOT_TRACER is not set
++# CONFIG_TRACE_BRANCH_PROFILING is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++# CONFIG_CRYPTO_GF128MUL is not set
++# CONFIG_CRYPTO_NULL is not set
++# CONFIG_CRYPTO_CRYPTD is not set
++# CONFIG_CRYPTO_AUTHENC is not set
++# CONFIG_CRYPTO_TEST is not set
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=m
++# CONFIG_CRYPTO_LRW is not set
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++# CONFIG_CRYPTO_HMAC is not set
++# CONFIG_CRYPTO_XCBC is not set
++
++#
++# Digest
++#
++CONFIG_CRYPTO_CRC32C=y
++# CONFIG_CRYPTO_MD4 is not set
++CONFIG_CRYPTO_MD5=y
++# CONFIG_CRYPTO_MICHAEL_MIC is not set
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++# CONFIG_CRYPTO_SHA1 is not set
++# CONFIG_CRYPTO_SHA256 is not set
++# CONFIG_CRYPTO_SHA512 is not set
++# CONFIG_CRYPTO_TGR192 is not set
++# CONFIG_CRYPTO_WP512 is not set
++
++#
++# Ciphers
++#
++# CONFIG_CRYPTO_AES is not set
++# CONFIG_CRYPTO_ANUBIS is not set
++# CONFIG_CRYPTO_ARC4 is not set
++# CONFIG_CRYPTO_BLOWFISH is not set
++# CONFIG_CRYPTO_CAMELLIA is not set
++# CONFIG_CRYPTO_CAST5 is not set
++# CONFIG_CRYPTO_CAST6 is not set
++CONFIG_CRYPTO_DES=y
++# CONFIG_CRYPTO_FCRYPT is not set
++# CONFIG_CRYPTO_KHAZAD is not set
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++# CONFIG_CRYPTO_SERPENT is not set
++# CONFIG_CRYPTO_TEA is not set
++# CONFIG_CRYPTO_TWOFISH is not set
++
++#
++# Compression
++#
++# CONFIG_CRYPTO_DEFLATE is not set
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++# CONFIG_CRC16 is not set
++# CONFIG_CRC_T10DIF is not set
++# CONFIG_CRC_ITU_T is not set
++CONFIG_CRC32=y
++# CONFIG_CRC7 is not set
++CONFIG_LIBCRC32C=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/arm/configs/dss_overo_defconfig b/arch/arm/configs/dss_overo_defconfig
+new file mode 100644
+index 0000000..755a1b6
+--- /dev/null
++++ b/arch/arm/configs/dss_overo_defconfig
+@@ -0,0 +1,1862 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.29-omap1
++# Thu Apr  2 11:30:57 2009
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_OPROFILE_ARMV7=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++CONFIG_LOCALVERSION_AUTO=y
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
++CONFIG_IKCONFIG=y
++CONFIG_IKCONFIG_PROC=y
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_ANON_INODES=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++# CONFIG_KALLSYMS_EXTRA_PASS is not set
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++# CONFIG_ELF_CORE is not set
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLUB_DEBUG=y
++# CONFIG_COMPAT_BRK is not set
++# CONFIG_SLAB is not set
++CONFIG_SLUB=y
++# CONFIG_SLOB is not set
++CONFIG_PROFILING=y
++CONFIG_TRACEPOINTS=y
++# CONFIG_MARKERS is not set
++CONFIG_OPROFILE=y
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLOCK=y
++CONFIG_LBD=y
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++# CONFIG_DEFAULT_AS is not set
++# CONFIG_DEFAULT_DEADLINE is not set
++CONFIG_DEFAULT_CFQ=y
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="cfq"
++CONFIG_FREEZER=y
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++CONFIG_ARCH_OMAP=y
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_W90X900 is not set
++
++#
++# TI OMAP Implementations
++#
++CONFIG_ARCH_OMAP_OTG=y
++# CONFIG_ARCH_OMAP1 is not set
++# CONFIG_ARCH_OMAP2 is not set
++CONFIG_ARCH_OMAP3=y
++
++#
++# OMAP Feature Selections
++#
++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
++CONFIG_OMAP_SMARTREFLEX=y
++# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
++# CONFIG_OMAP_RESET_CLOCKS is not set
++CONFIG_OMAP_BOOT_TAG=y
++CONFIG_OMAP_BOOT_REASON=y
++# CONFIG_OMAP_COMPONENT_VERSION is not set
++# CONFIG_OMAP_GPIO_SWITCH is not set
++# CONFIG_OMAP_MUX is not set
++CONFIG_OMAP_MCBSP=y
++# CONFIG_OMAP_MBOX_FWK is not set
++# CONFIG_OMAP_MPU_TIMER is not set
++CONFIG_OMAP_32K_TIMER=y
++CONFIG_OMAP_32K_TIMER_HZ=128
++CONFIG_OMAP_TICK_GPTIMER=1
++CONFIG_OMAP_DM_TIMER=y
++# CONFIG_OMAP_LL_DEBUG_UART1 is not set
++# CONFIG_OMAP_LL_DEBUG_UART2 is not set
++CONFIG_OMAP_LL_DEBUG_UART3=y
++CONFIG_ARCH_OMAP34XX=y
++CONFIG_ARCH_OMAP3430=y
++
++#
++# OMAP Board Type
++#
++# CONFIG_MACH_NOKIA_RX51 is not set
++# CONFIG_MACH_OMAP_LDP is not set
++# CONFIG_MACH_OMAP_3430SDP is not set
++# CONFIG_MACH_OMAP3EVM is not set
++# CONFIG_MACH_OMAP3_BEAGLE is not set
++CONFIG_MACH_OVERO=y
++# CONFIG_MACH_OMAP3_PANDORA is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_32v6K=y
++CONFIG_CPU_V7=y
++CONFIG_CPU_32v7=y
++CONFIG_CPU_ABRT_EV7=y
++CONFIG_CPU_PABRT_IFAR=y
++CONFIG_CPU_CACHE_V7=y
++CONFIG_CPU_CACHE_VIPT=y
++CONFIG_CPU_COPY_V6=y
++CONFIG_CPU_TLB_V7=y
++CONFIG_CPU_HAS_ASID=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++CONFIG_ARM_THUMBEE=y
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_BPREDICT_DISABLE is not set
++CONFIG_HAS_TLS_REG=y
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=128
++CONFIG_AEABI=y
++# CONFIG_OABI_COMPAT is not set
++CONFIG_ARCH_FLATMEM_HAS_HOLES=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_UNEVICTABLE_LRU=y
++CONFIG_LEDS=y
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.2.14:/tftpboot/rootfs ip=192.168.2.15 nolock,rsize=1024,wsize=1024 rw"
++# CONFIG_XIP_KERNEL is not set
++CONFIG_KEXEC=y
++CONFIG_ATAGS_PROC=y
++
++#
++# CPU Power Management
++#
++CONFIG_CPU_FREQ=y
++CONFIG_CPU_FREQ_TABLE=y
++# CONFIG_CPU_FREQ_DEBUG is not set
++CONFIG_CPU_FREQ_STAT=y
++CONFIG_CPU_FREQ_STAT_DETAILS=y
++CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
++# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
++CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
++# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
++CONFIG_CPU_FREQ_GOV_USERSPACE=y
++CONFIG_CPU_FREQ_GOV_ONDEMAND=y
++# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_VFP=y
++CONFIG_VFPv3=y
++CONFIG_NEON=y
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++CONFIG_HAVE_AOUT=y
++CONFIG_BINFMT_AOUT=m
++CONFIG_BINFMT_MISC=y
++
++#
++# Power management options
++#
++CONFIG_PM=y
++# CONFIG_PM_DEBUG is not set
++CONFIG_PM_SLEEP=y
++CONFIG_SUSPEND=y
++CONFIG_SUSPEND_FREEZER=y
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_COMPAT_NET_DEV_OPS=y
++CONFIG_PACKET=y
++CONFIG_PACKET_MMAP=y
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++CONFIG_INET_TUNNEL=m
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++CONFIG_IPV6=m
++# CONFIG_IPV6_PRIVACY is not set
++# CONFIG_IPV6_ROUTER_PREF is not set
++# CONFIG_IPV6_OPTIMISTIC_DAD is not set
++# CONFIG_INET6_AH is not set
++# CONFIG_INET6_ESP is not set
++# CONFIG_INET6_IPCOMP is not set
++# CONFIG_IPV6_MIP6 is not set
++# CONFIG_INET6_XFRM_TUNNEL is not set
++# CONFIG_INET6_TUNNEL is not set
++CONFIG_INET6_XFRM_MODE_TRANSPORT=m
++CONFIG_INET6_XFRM_MODE_TUNNEL=m
++CONFIG_INET6_XFRM_MODE_BEET=m
++# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
++CONFIG_IPV6_SIT=m
++CONFIG_IPV6_NDISC_NODETYPE=y
++# CONFIG_IPV6_TUNNEL is not set
++# CONFIG_IPV6_MULTIPLE_TABLES is not set
++# CONFIG_IPV6_MROUTE is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++CONFIG_BT=y
++CONFIG_BT_L2CAP=y
++CONFIG_BT_SCO=y
++CONFIG_BT_RFCOMM=y
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=y
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=y
++
++#
++# Bluetooth device drivers
++#
++# CONFIG_BT_HCIBTSDIO is not set
++CONFIG_BT_HCIUART=y
++CONFIG_BT_HCIUART_H4=y
++CONFIG_BT_HCIUART_BCSP=y
++# CONFIG_BT_HCIUART_LL is not set
++# CONFIG_BT_HCIBRF6150 is not set
++# CONFIG_BT_HCIH4P is not set
++# CONFIG_BT_HCIVHCI is not set
++# CONFIG_AF_RXRPC is not set
++# CONFIG_PHONET is not set
++CONFIG_WIRELESS=y
++CONFIG_CFG80211=y
++# CONFIG_CFG80211_REG_DEBUG is not set
++CONFIG_NL80211=y
++CONFIG_WIRELESS_OLD_REGULATORY=y
++CONFIG_WIRELESS_EXT=y
++CONFIG_WIRELESS_EXT_SYSFS=y
++CONFIG_LIB80211=y
++CONFIG_LIB80211_CRYPT_WEP=m
++CONFIG_LIB80211_CRYPT_CCMP=m
++CONFIG_LIB80211_CRYPT_TKIP=m
++# CONFIG_LIB80211_DEBUG is not set
++CONFIG_MAC80211=y
++
++#
++# Rate control algorithm selection
++#
++CONFIG_MAC80211_RC_PID=y
++CONFIG_MAC80211_RC_MINSTREL=y
++CONFIG_MAC80211_RC_DEFAULT_PID=y
++# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
++CONFIG_MAC80211_RC_DEFAULT="pid"
++# CONFIG_MAC80211_MESH is not set
++CONFIG_MAC80211_LEDS=y
++# CONFIG_MAC80211_DEBUGFS is not set
++# CONFIG_MAC80211_DEBUG_MENU is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++CONFIG_FW_LOADER=y
++CONFIG_FIRMWARE_IN_KERNEL=y
++CONFIG_EXTRA_FIRMWARE=""
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++CONFIG_MTD_CONCAT=y
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_TESTS is not set
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_DATAFLASH is not set
++# CONFIG_MTD_M25P80 is not set
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_OMAP2=y
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_CRYPTOLOOP=m
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=16384
++# CONFIG_BLK_DEV_XIP is not set
++CONFIG_CDROM_PKTCDVD=m
++CONFIG_CDROM_PKTCDVD_BUFFERS=8
++# CONFIG_CDROM_PKTCDVD_WCACHE is not set
++# CONFIG_ATA_OVER_ETH is not set
++CONFIG_MISC_DEVICES=y
++# CONFIG_ICS932S401 is not set
++# CONFIG_OMAP_STI is not set
++# CONFIG_ENCLOSURE_SERVICES is not set
++# CONFIG_C2PORT is not set
++
++#
++# EEPROM support
++#
++# CONFIG_EEPROM_AT24 is not set
++# CONFIG_EEPROM_AT25 is not set
++# CONFIG_EEPROM_LEGACY is not set
++CONFIG_EEPROM_93CX6=m
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++CONFIG_RAID_ATTRS=m
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++CONFIG_CHR_DEV_SG=m
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++CONFIG_SCSI_MULTI_LUN=y
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_LIBFC is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_ATA is not set
++CONFIG_MD=y
++CONFIG_BLK_DEV_MD=m
++CONFIG_MD_LINEAR=m
++CONFIG_MD_RAID0=m
++CONFIG_MD_RAID1=m
++CONFIG_MD_RAID10=m
++CONFIG_MD_RAID456=m
++CONFIG_MD_RAID5_RESHAPE=y
++CONFIG_MD_MULTIPATH=m
++CONFIG_MD_FAULTY=m
++CONFIG_BLK_DEV_DM=m
++# CONFIG_DM_DEBUG is not set
++CONFIG_DM_CRYPT=m
++CONFIG_DM_SNAPSHOT=m
++CONFIG_DM_MIRROR=m
++CONFIG_DM_ZERO=m
++CONFIG_DM_MULTIPATH=m
++CONFIG_DM_DELAY=m
++# CONFIG_DM_UEVENT is not set
++CONFIG_NETDEVICES=y
++CONFIG_DUMMY=m
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++CONFIG_TUN=m
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++CONFIG_WLAN_80211=y
++CONFIG_LIBERTAS=y
++CONFIG_LIBERTAS_SDIO=y
++CONFIG_LIBERTAS_DEBUG=y
++# CONFIG_LIBERTAS_THINFIRM is not set
++# CONFIG_MAC80211_HWSIM is not set
++CONFIG_P54_COMMON=m
++# CONFIG_IWLWIFI_LEDS is not set
++CONFIG_HOSTAP=m
++CONFIG_HOSTAP_FIRMWARE=y
++CONFIG_HOSTAP_FIRMWARE_NVRAM=y
++# CONFIG_B43 is not set
++# CONFIG_B43LEGACY is not set
++# CONFIG_RT2X00 is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++# CONFIG_WAN is not set
++CONFIG_PPP=m
++# CONFIG_PPP_MULTILINK is not set
++# CONFIG_PPP_FILTER is not set
++CONFIG_PPP_ASYNC=m
++CONFIG_PPP_SYNC_TTY=m
++CONFIG_PPP_DEFLATE=m
++CONFIG_PPP_BSDCOMP=m
++CONFIG_PPP_MPPE=m
++CONFIG_PPPOE=m
++# CONFIG_PPPOL2TP is not set
++# CONFIG_SLIP is not set
++CONFIG_SLHC=m
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++CONFIG_INPUT_MOUSEDEV=y
++CONFIG_INPUT_MOUSEDEV_PSAUX=y
++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
++# CONFIG_INPUT_JOYDEV is not set
++CONFIG_INPUT_EVDEV=y
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++CONFIG_INPUT_KEYBOARD=y
++# CONFIG_KEYBOARD_ATKBD is not set
++# CONFIG_KEYBOARD_SUNKBD is not set
++# CONFIG_KEYBOARD_LKKBD is not set
++# CONFIG_KEYBOARD_XTKBD is not set
++# CONFIG_KEYBOARD_NEWTON is not set
++# CONFIG_KEYBOARD_STOWAWAY is not set
++# CONFIG_KEYBOARD_TWL4030 is not set
++# CONFIG_KEYBOARD_LM8323 is not set
++# CONFIG_KEYBOARD_GPIO is not set
++CONFIG_INPUT_MOUSE=y
++CONFIG_MOUSE_PS2=y
++CONFIG_MOUSE_PS2_ALPS=y
++CONFIG_MOUSE_PS2_LOGIPS2PP=y
++CONFIG_MOUSE_PS2_SYNAPTICS=y
++CONFIG_MOUSE_PS2_TRACKPOINT=y
++# CONFIG_MOUSE_PS2_ELANTECH is not set
++# CONFIG_MOUSE_PS2_TOUCHKIT is not set
++# CONFIG_MOUSE_SERIAL is not set
++# CONFIG_MOUSE_APPLETOUCH is not set
++# CONFIG_MOUSE_BCM5974 is not set
++# CONFIG_MOUSE_VSXXXAA is not set
++# CONFIG_MOUSE_GPIO is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++CONFIG_SERIO=y
++CONFIG_SERIO_SERPORT=y
++CONFIG_SERIO_LIBPS2=y
++# CONFIG_SERIO_RAW is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++CONFIG_VT_HW_CONSOLE_BINDING=y
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=32
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
++# CONFIG_LEGACY_PTYS is not set
++# CONFIG_IPMI_HANDLER is not set
++CONFIG_HW_RANDOM=y
++# CONFIG_R3964 is not set
++# CONFIG_RAW_DRIVER is not set
++# CONFIG_TCG_TPM is not set
++CONFIG_I2C=y
++CONFIG_I2C_BOARDINFO=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_HELPER_AUTO=y
++
++#
++# I2C Hardware Bus support
++#
++
++#
++# I2C system bus drivers (mostly embedded / system-on-chip)
++#
++# CONFIG_I2C_GPIO is not set
++# CONFIG_I2C_OCORES is not set
++CONFIG_I2C_OMAP=y
++# CONFIG_I2C_SIMTEC is not set
++
++#
++# External I2C/SMBus adapter drivers
++#
++# CONFIG_I2C_PARPORT_LIGHT is not set
++# CONFIG_I2C_TAOS_EVM is not set
++
++#
++# Other I2C/SMBus bus drivers
++#
++# CONFIG_I2C_PCA_PLATFORM is not set
++# CONFIG_I2C_STUB is not set
++
++#
++# Miscellaneous I2C Chip support
++#
++# CONFIG_DS1682 is not set
++# CONFIG_SENSORS_PCF8574 is not set
++# CONFIG_PCF8575 is not set
++# CONFIG_SENSORS_PCA9539 is not set
++# CONFIG_SENSORS_PCF8591 is not set
++CONFIG_TWL4030_MADC=m
++CONFIG_TWL4030_POWEROFF=y
++# CONFIG_SENSORS_MAX6875 is not set
++# CONFIG_SENSORS_TSL2550 is not set
++# CONFIG_SENSORS_TSL2563 is not set
++# CONFIG_I2C_DEBUG_CORE is not set
++# CONFIG_I2C_DEBUG_ALGO is not set
++# CONFIG_I2C_DEBUG_BUS is not set
++# CONFIG_I2C_DEBUG_CHIP is not set
++CONFIG_SPI=y
++# CONFIG_SPI_DEBUG is not set
++CONFIG_SPI_MASTER=y
++
++#
++# SPI Master Controller Drivers
++#
++# CONFIG_SPI_BITBANG is not set
++# CONFIG_SPI_GPIO is not set
++CONFIG_SPI_OMAP24XX=y
++
++#
++# SPI Protocol Masters
++#
++# CONFIG_SPI_TSC210X is not set
++# CONFIG_SPI_TSC2301 is not set
++# CONFIG_SPI_SPIDEV is not set
++# CONFIG_SPI_TLE62X0 is not set
++CONFIG_ARCH_REQUIRE_GPIOLIB=y
++CONFIG_GPIOLIB=y
++CONFIG_DEBUG_GPIO=y
++CONFIG_GPIO_SYSFS=y
++
++#
++# Memory mapped GPIO expanders:
++#
++
++#
++# I2C GPIO expanders:
++#
++# CONFIG_GPIO_MAX732X is not set
++# CONFIG_GPIO_PCA953X is not set
++# CONFIG_GPIO_PCF857X is not set
++CONFIG_GPIO_TWL4030=y
++
++#
++# PCI GPIO expanders:
++#
++
++#
++# SPI GPIO expanders:
++#
++# CONFIG_GPIO_MAX7301 is not set
++# CONFIG_GPIO_MCP23S08 is not set
++# CONFIG_W1 is not set
++CONFIG_POWER_SUPPLY=m
++# CONFIG_POWER_SUPPLY_DEBUG is not set
++# CONFIG_PDA_POWER is not set
++# CONFIG_BATTERY_DS2760 is not set
++# CONFIG_TWL4030_BCI_BATTERY is not set
++# CONFIG_BATTERY_BQ27x00 is not set
++CONFIG_HWMON=y
++# CONFIG_HWMON_VID is not set
++# CONFIG_SENSORS_AD7414 is not set
++# CONFIG_SENSORS_AD7418 is not set
++# CONFIG_SENSORS_ADCXX is not set
++# CONFIG_SENSORS_ADM1021 is not set
++# CONFIG_SENSORS_ADM1025 is not set
++# CONFIG_SENSORS_ADM1026 is not set
++# CONFIG_SENSORS_ADM1029 is not set
++# CONFIG_SENSORS_ADM1031 is not set
++# CONFIG_SENSORS_ADM9240 is not set
++# CONFIG_SENSORS_ADT7462 is not set
++# CONFIG_SENSORS_ADT7470 is not set
++# CONFIG_SENSORS_ADT7473 is not set
++# CONFIG_SENSORS_ADT7475 is not set
++# CONFIG_SENSORS_ATXP1 is not set
++# CONFIG_SENSORS_DS1621 is not set
++# CONFIG_SENSORS_F71805F is not set
++# CONFIG_SENSORS_F71882FG is not set
++# CONFIG_SENSORS_F75375S is not set
++# CONFIG_SENSORS_GL518SM is not set
++# CONFIG_SENSORS_GL520SM is not set
++# CONFIG_SENSORS_IT87 is not set
++# CONFIG_SENSORS_LM63 is not set
++# CONFIG_SENSORS_LM70 is not set
++# CONFIG_SENSORS_LM75 is not set
++# CONFIG_SENSORS_LM77 is not set
++# CONFIG_SENSORS_LM78 is not set
++# CONFIG_SENSORS_LM80 is not set
++# CONFIG_SENSORS_LM83 is not set
++# CONFIG_SENSORS_LM85 is not set
++# CONFIG_SENSORS_LM87 is not set
++# CONFIG_SENSORS_LM90 is not set
++# CONFIG_SENSORS_LM92 is not set
++# CONFIG_SENSORS_LM93 is not set
++# CONFIG_SENSORS_LTC4245 is not set
++# CONFIG_SENSORS_MAX1111 is not set
++# CONFIG_SENSORS_MAX1619 is not set
++# CONFIG_SENSORS_MAX6650 is not set
++# CONFIG_SENSORS_PC87360 is not set
++# CONFIG_SENSORS_PC87427 is not set
++# CONFIG_SENSORS_DME1737 is not set
++# CONFIG_SENSORS_SMSC47M1 is not set
++# CONFIG_SENSORS_SMSC47M192 is not set
++# CONFIG_SENSORS_SMSC47B397 is not set
++# CONFIG_SENSORS_ADS7828 is not set
++# CONFIG_SENSORS_THMC50 is not set
++# CONFIG_SENSORS_VT1211 is not set
++# CONFIG_SENSORS_W83781D is not set
++# CONFIG_SENSORS_W83791D is not set
++# CONFIG_SENSORS_W83792D is not set
++# CONFIG_SENSORS_W83793 is not set
++# CONFIG_SENSORS_W83L785TS is not set
++# CONFIG_SENSORS_W83L786NG is not set
++# CONFIG_SENSORS_W83627HF is not set
++# CONFIG_SENSORS_W83627EHF is not set
++# CONFIG_SENSORS_TSC210X is not set
++CONFIG_SENSORS_OMAP34XX=y
++# CONFIG_HWMON_DEBUG_CHIP is not set
++# CONFIG_THERMAL is not set
++# CONFIG_THERMAL_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_NOWAYOUT=y
++
++#
++# Watchdog Device Drivers
++#
++# CONFIG_SOFT_WATCHDOG is not set
++CONFIG_OMAP_WATCHDOG=y
++CONFIG_SSB_POSSIBLE=y
++
++#
++# Sonics Silicon Backplane
++#
++# CONFIG_SSB is not set
++
++#
++# Multifunction device drivers
++#
++# CONFIG_MFD_CORE is not set
++# CONFIG_MFD_SM501 is not set
++# CONFIG_MFD_ASIC3 is not set
++# CONFIG_HTC_EGPIO is not set
++# CONFIG_HTC_PASIC3 is not set
++# CONFIG_TPS65010 is not set
++CONFIG_TWL4030_CORE=y
++# CONFIG_TWL4030_POWER is not set
++# CONFIG_MFD_TMIO is not set
++# CONFIG_MFD_T7L66XB is not set
++# CONFIG_MFD_TC6387XB is not set
++# CONFIG_MFD_TC6393XB is not set
++# CONFIG_PMIC_DA903X is not set
++# CONFIG_MFD_WM8400 is not set
++# CONFIG_MFD_WM8350_I2C is not set
++# CONFIG_MFD_PCF50633 is not set
++
++#
++# Multimedia devices
++#
++
++#
++# Multimedia core support
++#
++CONFIG_VIDEO_DEV=m
++CONFIG_VIDEO_V4L2_COMMON=m
++CONFIG_VIDEO_ALLOW_V4L1=y
++CONFIG_VIDEO_V4L1_COMPAT=y
++CONFIG_DVB_CORE=m
++CONFIG_VIDEO_MEDIA=m
++
++#
++# Multimedia drivers
++#
++CONFIG_MEDIA_ATTACH=y
++CONFIG_MEDIA_TUNER=m
++# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
++CONFIG_MEDIA_TUNER_SIMPLE=m
++CONFIG_MEDIA_TUNER_TDA8290=m
++CONFIG_MEDIA_TUNER_TDA9887=m
++CONFIG_MEDIA_TUNER_TEA5761=m
++CONFIG_MEDIA_TUNER_TEA5767=m
++CONFIG_MEDIA_TUNER_MT20XX=m
++CONFIG_MEDIA_TUNER_XC2028=m
++CONFIG_MEDIA_TUNER_XC5000=m
++CONFIG_VIDEO_V4L2=m
++CONFIG_VIDEO_V4L1=m
++CONFIG_VIDEO_CAPTURE_DRIVERS=y
++# CONFIG_VIDEO_ADV_DEBUG is not set
++# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
++CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
++# CONFIG_VIDEO_VIVI is not set
++# CONFIG_VIDEO_CPIA is not set
++# CONFIG_VIDEO_SAA5246A is not set
++# CONFIG_VIDEO_SAA5249 is not set
++# CONFIG_SOC_CAMERA is not set
++CONFIG_RADIO_ADAPTERS=y
++# CONFIG_RADIO_TEA5764 is not set
++# CONFIG_DVB_DYNAMIC_MINORS is not set
++CONFIG_DVB_CAPTURE_DRIVERS=y
++# CONFIG_TTPCI_EEPROM is not set
++# CONFIG_DVB_B2C2_FLEXCOP is not set
++
++#
++# Supported DVB Frontends
++#
++
++#
++# Customise DVB Frontends
++#
++# CONFIG_DVB_FE_CUSTOMISE is not set
++
++#
++# Multistandard (satellite) frontends
++#
++# CONFIG_DVB_STB0899 is not set
++# CONFIG_DVB_STB6100 is not set
++
++#
++# DVB-S (satellite) frontends
++#
++CONFIG_DVB_CX24110=m
++CONFIG_DVB_CX24123=m
++CONFIG_DVB_MT312=m
++CONFIG_DVB_S5H1420=m
++# CONFIG_DVB_STV0288 is not set
++# CONFIG_DVB_STB6000 is not set
++CONFIG_DVB_STV0299=m
++CONFIG_DVB_TDA8083=m
++CONFIG_DVB_TDA10086=m
++# CONFIG_DVB_TDA8261 is not set
++CONFIG_DVB_VES1X93=m
++CONFIG_DVB_TUNER_ITD1000=m
++# CONFIG_DVB_TUNER_CX24113 is not set
++CONFIG_DVB_TDA826X=m
++CONFIG_DVB_TUA6100=m
++# CONFIG_DVB_CX24116 is not set
++# CONFIG_DVB_SI21XX is not set
++
++#
++# DVB-T (terrestrial) frontends
++#
++CONFIG_DVB_SP8870=m
++CONFIG_DVB_SP887X=m
++CONFIG_DVB_CX22700=m
++CONFIG_DVB_CX22702=m
++# CONFIG_DVB_DRX397XD is not set
++CONFIG_DVB_L64781=m
++CONFIG_DVB_TDA1004X=m
++CONFIG_DVB_NXT6000=m
++CONFIG_DVB_MT352=m
++CONFIG_DVB_ZL10353=m
++CONFIG_DVB_DIB3000MB=m
++CONFIG_DVB_DIB3000MC=m
++CONFIG_DVB_DIB7000M=m
++CONFIG_DVB_DIB7000P=m
++CONFIG_DVB_TDA10048=m
++
++#
++# DVB-C (cable) frontends
++#
++CONFIG_DVB_VES1820=m
++CONFIG_DVB_TDA10021=m
++CONFIG_DVB_TDA10023=m
++CONFIG_DVB_STV0297=m
++
++#
++# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
++#
++CONFIG_DVB_NXT200X=m
++# CONFIG_DVB_OR51211 is not set
++# CONFIG_DVB_OR51132 is not set
++CONFIG_DVB_BCM3510=m
++CONFIG_DVB_LGDT330X=m
++# CONFIG_DVB_LGDT3304 is not set
++CONFIG_DVB_S5H1409=m
++CONFIG_DVB_AU8522=m
++CONFIG_DVB_S5H1411=m
++
++#
++# ISDB-T (terrestrial) frontends
++#
++# CONFIG_DVB_S921 is not set
++
++#
++# Digital terrestrial only tuners/PLL
++#
++CONFIG_DVB_PLL=m
++CONFIG_DVB_TUNER_DIB0070=m
++
++#
++# SEC control devices for DVB-S
++#
++CONFIG_DVB_LNBP21=m
++# CONFIG_DVB_ISL6405 is not set
++CONFIG_DVB_ISL6421=m
++# CONFIG_DVB_LGS8GL5 is not set
++
++#
++# Tools to develop new frontends
++#
++# CONFIG_DVB_DUMMY_FE is not set
++# CONFIG_DVB_AF9013 is not set
++# CONFIG_DAB is not set
++
++#
++# Graphics support
++#
++# CONFIG_VGASTATE is not set
++# CONFIG_VIDEO_OUTPUT_CONTROL is not set
++CONFIG_FB=y
++# CONFIG_FIRMWARE_EDID is not set
++# CONFIG_FB_DDC is not set
++# CONFIG_FB_BOOT_VESA_SUPPORT is not set
++CONFIG_FB_CFB_FILLRECT=m
++CONFIG_FB_CFB_COPYAREA=m
++CONFIG_FB_CFB_IMAGEBLIT=m
++# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
++# CONFIG_FB_SYS_FILLRECT is not set
++# CONFIG_FB_SYS_COPYAREA is not set
++# CONFIG_FB_SYS_IMAGEBLIT is not set
++# CONFIG_FB_FOREIGN_ENDIAN is not set
++# CONFIG_FB_SYS_FOPS is not set
++# CONFIG_FB_SVGALIB is not set
++# CONFIG_FB_MACMODES is not set
++# CONFIG_FB_BACKLIGHT is not set
++# CONFIG_FB_MODE_HELPERS is not set
++# CONFIG_FB_TILEBLITTING is not set
++
++#
++# Frame buffer hardware drivers
++#
++# CONFIG_FB_S1D13XXX is not set
++# CONFIG_FB_VIRTUAL is not set
++# CONFIG_FB_METRONOME is not set
++# CONFIG_FB_MB862XX is not set
++# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
++CONFIG_OMAP2_DSS=m
++CONFIG_OMAP2_DSS_VRAM_SIZE=12
++CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
++# CONFIG_OMAP2_DSS_RFBI is not set
++CONFIG_OMAP2_DSS_VENC=y
++# CONFIG_OMAP2_DSS_SDI is not set
++# CONFIG_OMAP2_DSS_DSI is not set
++# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
++CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
++
++#
++# OMAP2/3 Display Device Drivers
++#
++CONFIG_PANEL_GENERIC=m
++CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=m
++# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
++# CONFIG_PANEL_N800 is not set
++# CONFIG_CTRL_BLIZZARD is not set
++CONFIG_FB_OMAP2=m
++CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
++# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
++CONFIG_FB_OMAP2_NUM_FBS=3
++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
++
++#
++# Display device support
++#
++CONFIG_DISPLAY_SUPPORT=y
++
++#
++# Display hardware drivers
++#
++
++#
++# Console display driver support
++#
++# CONFIG_VGA_CONSOLE is not set
++CONFIG_DUMMY_CONSOLE=y
++# CONFIG_FRAMEBUFFER_CONSOLE is not set
++# CONFIG_LOGO is not set
++CONFIG_SOUND=y
++CONFIG_SOUND_OSS_CORE=y
++CONFIG_SND=y
++CONFIG_SND_TIMER=y
++CONFIG_SND_PCM=y
++CONFIG_SND_SEQUENCER=m
++# CONFIG_SND_SEQ_DUMMY is not set
++CONFIG_SND_OSSEMUL=y
++CONFIG_SND_MIXER_OSS=y
++CONFIG_SND_PCM_OSS=y
++CONFIG_SND_PCM_OSS_PLUGINS=y
++CONFIG_SND_SEQUENCER_OSS=y
++# CONFIG_SND_HRTIMER is not set
++# CONFIG_SND_DYNAMIC_MINORS is not set
++CONFIG_SND_SUPPORT_OLD_API=y
++CONFIG_SND_VERBOSE_PROCFS=y
++CONFIG_SND_VERBOSE_PRINTK=y
++CONFIG_SND_DEBUG=y
++# CONFIG_SND_DEBUG_VERBOSE is not set
++# CONFIG_SND_PCM_XRUN_DEBUG is not set
++CONFIG_SND_DRIVERS=y
++# CONFIG_SND_DUMMY is not set
++# CONFIG_SND_VIRMIDI is not set
++# CONFIG_SND_MTPAV is not set
++# CONFIG_SND_SERIAL_U16550 is not set
++# CONFIG_SND_MPU401 is not set
++CONFIG_SND_ARM=y
++CONFIG_SND_SPI=y
++CONFIG_SND_SOC=y
++CONFIG_SND_OMAP_SOC=y
++CONFIG_SND_OMAP_SOC_MCBSP=y
++CONFIG_SND_OMAP_SOC_OVERO=y
++CONFIG_SND_SOC_I2C_AND_SPI=y
++# CONFIG_SND_SOC_ALL_CODECS is not set
++CONFIG_SND_SOC_TWL4030=y
++# CONFIG_SOUND_PRIME is not set
++CONFIG_HID_SUPPORT=y
++CONFIG_HID=y
++CONFIG_HID_DEBUG=y
++# CONFIG_HIDRAW is not set
++# CONFIG_HID_PID is not set
++
++#
++# Special HID drivers
++#
++CONFIG_HID_COMPAT=y
++# CONFIG_HID_APPLE is not set
++CONFIG_USB_SUPPORT=y
++CONFIG_USB_ARCH_HAS_HCD=y
++CONFIG_USB_ARCH_HAS_OHCI=y
++CONFIG_USB_ARCH_HAS_EHCI=y
++# CONFIG_USB is not set
++# CONFIG_USB_OTG_WHITELIST is not set
++# CONFIG_USB_OTG_BLACKLIST_HUB is not set
++CONFIG_USB_MUSB_HDRC=y
++CONFIG_USB_MUSB_SOC=y
++
++#
++# OMAP 343x high speed USB support
++#
++# CONFIG_USB_MUSB_HOST is not set
++CONFIG_USB_MUSB_PERIPHERAL=y
++# CONFIG_USB_MUSB_OTG is not set
++CONFIG_USB_GADGET_MUSB_HDRC=y
++# CONFIG_MUSB_PIO_ONLY is not set
++CONFIG_USB_INVENTRA_DMA=y
++# CONFIG_USB_TI_CPPI_DMA is not set
++# CONFIG_USB_MUSB_DEBUG is not set
++
++#
++# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
++#
++CONFIG_USB_GADGET=y
++# CONFIG_USB_GADGET_DEBUG is not set
++# CONFIG_USB_GADGET_DEBUG_FILES is not set
++# CONFIG_USB_GADGET_DEBUG_FS is not set
++CONFIG_USB_GADGET_VBUS_DRAW=2
++CONFIG_USB_GADGET_SELECTED=y
++# CONFIG_USB_GADGET_AT91 is not set
++# CONFIG_USB_GADGET_ATMEL_USBA is not set
++# CONFIG_USB_GADGET_FSL_USB2 is not set
++# CONFIG_USB_GADGET_LH7A40X is not set
++# CONFIG_USB_GADGET_OMAP is not set
++# CONFIG_USB_GADGET_PXA25X is not set
++# CONFIG_USB_GADGET_PXA27X is not set
++# CONFIG_USB_GADGET_S3C2410 is not set
++# CONFIG_USB_GADGET_IMX is not set
++# CONFIG_USB_GADGET_M66592 is not set
++# CONFIG_USB_GADGET_AMD5536UDC is not set
++# CONFIG_USB_GADGET_FSL_QE is not set
++# CONFIG_USB_GADGET_CI13XXX is not set
++# CONFIG_USB_GADGET_NET2280 is not set
++# CONFIG_USB_GADGET_GOKU is not set
++# CONFIG_USB_GADGET_DUMMY_HCD is not set
++CONFIG_USB_GADGET_DUALSPEED=y
++# CONFIG_USB_ZERO is not set
++CONFIG_USB_ETH=y
++CONFIG_USB_ETH_RNDIS=y
++# CONFIG_USB_GADGETFS is not set
++# CONFIG_USB_FILE_STORAGE is not set
++# CONFIG_USB_G_SERIAL is not set
++# CONFIG_USB_MIDI_GADGET is not set
++# CONFIG_USB_G_PRINTER is not set
++# CONFIG_USB_CDC_COMPOSITE is not set
++
++#
++# OTG and related infrastructure
++#
++CONFIG_USB_OTG_UTILS=y
++# CONFIG_USB_GPIO_VBUS is not set
++# CONFIG_ISP1301_OMAP is not set
++CONFIG_TWL4030_USB=y
++CONFIG_MMC=y
++# CONFIG_MMC_DEBUG is not set
++CONFIG_MMC_UNSAFE_RESUME=y
++
++#
++# MMC/SD/SDIO Card Drivers
++#
++CONFIG_MMC_BLOCK=y
++CONFIG_MMC_BLOCK_BOUNCE=y
++CONFIG_SDIO_UART=y
++# CONFIG_MMC_TEST is not set
++
++#
++# MMC/SD/SDIO Host Controller Drivers
++#
++# CONFIG_MMC_SDHCI is not set
++CONFIG_MMC_OMAP_HS=y
++# CONFIG_MMC_SPI is not set
++# CONFIG_MEMSTICK is not set
++# CONFIG_ACCESSIBILITY is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++
++#
++# LED drivers
++#
++# CONFIG_LEDS_OMAP_DEBUG is not set
++# CONFIG_LEDS_OMAP is not set
++# CONFIG_LEDS_OMAP_PWM is not set
++# CONFIG_LEDS_PCA9532 is not set
++CONFIG_LEDS_GPIO=y
++# CONFIG_LEDS_LP5521 is not set
++# CONFIG_LEDS_PCA955X is not set
++
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
++# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
++CONFIG_RTC_LIB=y
++CONFIG_RTC_CLASS=y
++CONFIG_RTC_HCTOSYS=y
++CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
++# CONFIG_RTC_DEBUG is not set
++
++#
++# RTC interfaces
++#
++CONFIG_RTC_INTF_SYSFS=y
++CONFIG_RTC_INTF_PROC=y
++CONFIG_RTC_INTF_DEV=y
++# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
++# CONFIG_RTC_DRV_TEST is not set
++
++#
++# I2C RTC drivers
++#
++# CONFIG_RTC_DRV_DS1307 is not set
++# CONFIG_RTC_DRV_DS1374 is not set
++# CONFIG_RTC_DRV_DS1672 is not set
++# CONFIG_RTC_DRV_MAX6900 is not set
++# CONFIG_RTC_DRV_RS5C372 is not set
++# CONFIG_RTC_DRV_ISL1208 is not set
++# CONFIG_RTC_DRV_X1205 is not set
++# CONFIG_RTC_DRV_PCF8563 is not set
++# CONFIG_RTC_DRV_PCF8583 is not set
++# CONFIG_RTC_DRV_M41T80 is not set
++CONFIG_RTC_DRV_TWL4030=y
++# CONFIG_RTC_DRV_S35390A is not set
++# CONFIG_RTC_DRV_FM3130 is not set
++# CONFIG_RTC_DRV_RX8581 is not set
++
++#
++# SPI RTC drivers
++#
++# CONFIG_RTC_DRV_M41T94 is not set
++# CONFIG_RTC_DRV_DS1305 is not set
++# CONFIG_RTC_DRV_DS1390 is not set
++# CONFIG_RTC_DRV_MAX6902 is not set
++# CONFIG_RTC_DRV_R9701 is not set
++# CONFIG_RTC_DRV_RS5C348 is not set
++# CONFIG_RTC_DRV_DS3234 is not set
++
++#
++# Platform RTC drivers
++#
++# CONFIG_RTC_DRV_CMOS is not set
++# CONFIG_RTC_DRV_DS1286 is not set
++# CONFIG_RTC_DRV_DS1511 is not set
++# CONFIG_RTC_DRV_DS1553 is not set
++# CONFIG_RTC_DRV_DS1742 is not set
++# CONFIG_RTC_DRV_STK17TA8 is not set
++# CONFIG_RTC_DRV_M48T86 is not set
++# CONFIG_RTC_DRV_M48T35 is not set
++# CONFIG_RTC_DRV_M48T59 is not set
++# CONFIG_RTC_DRV_BQ4802 is not set
++# CONFIG_RTC_DRV_V3020 is not set
++
++#
++# on-CPU RTC drivers
++#
++# CONFIG_DMADEVICES is not set
++CONFIG_REGULATOR=y
++# CONFIG_REGULATOR_DEBUG is not set
++# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
++# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
++# CONFIG_REGULATOR_BQ24022 is not set
++CONFIG_REGULATOR_TWL4030=y
++# CONFIG_UIO is not set
++# CONFIG_STAGING is not set
++
++#
++# CBUS support
++#
++# CONFIG_CBUS is not set
++
++#
++# File systems
++#
++CONFIG_EXT2_FS=y
++# CONFIG_EXT2_FS_XATTR is not set
++# CONFIG_EXT2_FS_XIP is not set
++CONFIG_EXT3_FS=y
++# CONFIG_EXT3_FS_XATTR is not set
++# CONFIG_EXT4_FS is not set
++CONFIG_JBD=y
++# CONFIG_JBD_DEBUG is not set
++# CONFIG_REISERFS_FS is not set
++# CONFIG_JFS_FS is not set
++CONFIG_FS_POSIX_ACL=y
++CONFIG_FILE_LOCKING=y
++CONFIG_XFS_FS=m
++# CONFIG_XFS_QUOTA is not set
++# CONFIG_XFS_POSIX_ACL is not set
++# CONFIG_XFS_RT is not set
++# CONFIG_XFS_DEBUG is not set
++# CONFIG_GFS2_FS is not set
++# CONFIG_OCFS2_FS is not set
++# CONFIG_BTRFS_FS is not set
++CONFIG_DNOTIFY=y
++CONFIG_INOTIFY=y
++CONFIG_INOTIFY_USER=y
++CONFIG_QUOTA=y
++# CONFIG_QUOTA_NETLINK_INTERFACE is not set
++CONFIG_PRINT_QUOTA_WARNING=y
++CONFIG_QUOTA_TREE=y
++# CONFIG_QFMT_V1 is not set
++CONFIG_QFMT_V2=y
++CONFIG_QUOTACTL=y
++# CONFIG_AUTOFS_FS is not set
++# CONFIG_AUTOFS4_FS is not set
++CONFIG_FUSE_FS=m
++
++#
++# CD-ROM/DVD Filesystems
++#
++CONFIG_ISO9660_FS=m
++CONFIG_JOLIET=y
++CONFIG_ZISOFS=y
++CONFIG_UDF_FS=m
++CONFIG_UDF_NLS=y
++
++#
++# DOS/FAT/NT Filesystems
++#
++CONFIG_FAT_FS=y
++CONFIG_MSDOS_FS=y
++CONFIG_VFAT_FS=y
++CONFIG_FAT_DEFAULT_CODEPAGE=437
++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
++# CONFIG_NTFS_FS is not set
++
++#
++# Pseudo filesystems
++#
++CONFIG_PROC_FS=y
++CONFIG_PROC_SYSCTL=y
++CONFIG_PROC_PAGE_MONITOR=y
++CONFIG_SYSFS=y
++CONFIG_TMPFS=y
++# CONFIG_TMPFS_POSIX_ACL is not set
++# CONFIG_HUGETLB_PAGE is not set
++# CONFIG_CONFIGFS_FS is not set
++CONFIG_MISC_FILESYSTEMS=y
++# CONFIG_ADFS_FS is not set
++# CONFIG_AFFS_FS is not set
++# CONFIG_HFS_FS is not set
++# CONFIG_HFSPLUS_FS is not set
++# CONFIG_BEFS_FS is not set
++# CONFIG_BFS_FS is not set
++# CONFIG_EFS_FS is not set
++CONFIG_JFFS2_FS=y
++CONFIG_JFFS2_FS_DEBUG=0
++CONFIG_JFFS2_FS_WRITEBUFFER=y
++# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
++CONFIG_JFFS2_SUMMARY=y
++CONFIG_JFFS2_FS_XATTR=y
++CONFIG_JFFS2_FS_POSIX_ACL=y
++CONFIG_JFFS2_FS_SECURITY=y
++CONFIG_JFFS2_COMPRESSION_OPTIONS=y
++CONFIG_JFFS2_ZLIB=y
++CONFIG_JFFS2_LZO=y
++CONFIG_JFFS2_RTIME=y
++CONFIG_JFFS2_RUBIN=y
++# CONFIG_JFFS2_CMODE_NONE is not set
++CONFIG_JFFS2_CMODE_PRIORITY=y
++# CONFIG_JFFS2_CMODE_SIZE is not set
++# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
++# CONFIG_CRAMFS is not set
++# CONFIG_SQUASHFS is not set
++# CONFIG_VXFS_FS is not set
++# CONFIG_MINIX_FS is not set
++# CONFIG_OMFS_FS is not set
++# CONFIG_HPFS_FS is not set
++# CONFIG_QNX4FS_FS is not set
++# CONFIG_ROMFS_FS is not set
++# CONFIG_SYSV_FS is not set
++# CONFIG_UFS_FS is not set
++CONFIG_NETWORK_FILESYSTEMS=y
++CONFIG_NFS_FS=y
++CONFIG_NFS_V3=y
++# CONFIG_NFS_V3_ACL is not set
++CONFIG_NFS_V4=y
++CONFIG_ROOT_NFS=y
++# CONFIG_NFSD is not set
++CONFIG_LOCKD=y
++CONFIG_LOCKD_V4=y
++CONFIG_EXPORTFS=m
++CONFIG_NFS_COMMON=y
++CONFIG_SUNRPC=y
++CONFIG_SUNRPC_GSS=y
++# CONFIG_SUNRPC_REGISTER_V4 is not set
++CONFIG_RPCSEC_GSS_KRB5=y
++# CONFIG_RPCSEC_GSS_SPKM3 is not set
++# CONFIG_SMB_FS is not set
++# CONFIG_CIFS is not set
++# CONFIG_NCP_FS is not set
++# CONFIG_CODA_FS is not set
++# CONFIG_AFS_FS is not set
++
++#
++# Partition Types
++#
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_ACORN_PARTITION is not set
++# CONFIG_OSF_PARTITION is not set
++# CONFIG_AMIGA_PARTITION is not set
++# CONFIG_ATARI_PARTITION is not set
++# CONFIG_MAC_PARTITION is not set
++CONFIG_MSDOS_PARTITION=y
++# CONFIG_BSD_DISKLABEL is not set
++# CONFIG_MINIX_SUBPARTITION is not set
++# CONFIG_SOLARIS_X86_PARTITION is not set
++# CONFIG_UNIXWARE_DISKLABEL is not set
++# CONFIG_LDM_PARTITION is not set
++# CONFIG_SGI_PARTITION is not set
++# CONFIG_ULTRIX_PARTITION is not set
++# CONFIG_SUN_PARTITION is not set
++# CONFIG_KARMA_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SYSV68_PARTITION is not set
++CONFIG_NLS=y
++CONFIG_NLS_DEFAULT="iso8859-1"
++CONFIG_NLS_CODEPAGE_437=y
++# CONFIG_NLS_CODEPAGE_737 is not set
++# CONFIG_NLS_CODEPAGE_775 is not set
++# CONFIG_NLS_CODEPAGE_850 is not set
++# CONFIG_NLS_CODEPAGE_852 is not set
++# CONFIG_NLS_CODEPAGE_855 is not set
++# CONFIG_NLS_CODEPAGE_857 is not set
++# CONFIG_NLS_CODEPAGE_860 is not set
++# CONFIG_NLS_CODEPAGE_861 is not set
++# CONFIG_NLS_CODEPAGE_862 is not set
++# CONFIG_NLS_CODEPAGE_863 is not set
++# CONFIG_NLS_CODEPAGE_864 is not set
++# CONFIG_NLS_CODEPAGE_865 is not set
++# CONFIG_NLS_CODEPAGE_866 is not set
++# CONFIG_NLS_CODEPAGE_869 is not set
++# CONFIG_NLS_CODEPAGE_936 is not set
++# CONFIG_NLS_CODEPAGE_950 is not set
++# CONFIG_NLS_CODEPAGE_932 is not set
++# CONFIG_NLS_CODEPAGE_949 is not set
++# CONFIG_NLS_CODEPAGE_874 is not set
++# CONFIG_NLS_ISO8859_8 is not set
++# CONFIG_NLS_CODEPAGE_1250 is not set
++# CONFIG_NLS_CODEPAGE_1251 is not set
++# CONFIG_NLS_ASCII is not set
++CONFIG_NLS_ISO8859_1=y
++# CONFIG_NLS_ISO8859_2 is not set
++# CONFIG_NLS_ISO8859_3 is not set
++# CONFIG_NLS_ISO8859_4 is not set
++# CONFIG_NLS_ISO8859_5 is not set
++# CONFIG_NLS_ISO8859_6 is not set
++# CONFIG_NLS_ISO8859_7 is not set
++# CONFIG_NLS_ISO8859_9 is not set
++# CONFIG_NLS_ISO8859_13 is not set
++# CONFIG_NLS_ISO8859_14 is not set
++# CONFIG_NLS_ISO8859_15 is not set
++# CONFIG_NLS_KOI8_R is not set
++# CONFIG_NLS_KOI8_U is not set
++# CONFIG_NLS_UTF8 is not set
++# CONFIG_DLM is not set
++
++#
++# Kernel hacking
++#
++# CONFIG_PRINTK_TIME is not set
++CONFIG_ENABLE_WARN_DEPRECATED=y
++CONFIG_ENABLE_MUST_CHECK=y
++CONFIG_FRAME_WARN=1024
++CONFIG_MAGIC_SYSRQ=y
++# CONFIG_UNUSED_SYMBOLS is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_HEADERS_CHECK is not set
++CONFIG_DEBUG_KERNEL=y
++# CONFIG_DEBUG_SHIRQ is not set
++CONFIG_DETECT_SOFTLOCKUP=y
++# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
++CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
++CONFIG_SCHED_DEBUG=y
++CONFIG_SCHEDSTATS=y
++CONFIG_TIMER_STATS=y
++# CONFIG_DEBUG_OBJECTS is not set
++# CONFIG_SLUB_DEBUG_ON is not set
++# CONFIG_SLUB_STATS is not set
++# CONFIG_DEBUG_RT_MUTEXES is not set
++# CONFIG_RT_MUTEX_TESTER is not set
++# CONFIG_DEBUG_SPINLOCK is not set
++CONFIG_DEBUG_MUTEXES=y
++# CONFIG_DEBUG_LOCK_ALLOC is not set
++# CONFIG_PROVE_LOCKING is not set
++# CONFIG_LOCK_STAT is not set
++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
++CONFIG_STACKTRACE=y
++# CONFIG_DEBUG_KOBJECT is not set
++CONFIG_DEBUG_BUGVERBOSE=y
++# CONFIG_DEBUG_INFO is not set
++# CONFIG_DEBUG_VM is not set
++# CONFIG_DEBUG_WRITECOUNT is not set
++# CONFIG_DEBUG_MEMORY_INIT is not set
++# CONFIG_DEBUG_LIST is not set
++# CONFIG_DEBUG_SG is not set
++# CONFIG_DEBUG_NOTIFIERS is not set
++CONFIG_FRAME_POINTER=y
++# CONFIG_BOOT_PRINTK_DELAY is not set
++# CONFIG_RCU_TORTURE_TEST is not set
++# CONFIG_RCU_CPU_STALL_DETECTOR is not set
++# CONFIG_BACKTRACE_SELF_TEST is not set
++# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
++# CONFIG_FAULT_INJECTION is not set
++# CONFIG_LATENCYTOP is not set
++CONFIG_NOP_TRACER=y
++CONFIG_HAVE_FUNCTION_TRACER=y
++CONFIG_RING_BUFFER=y
++CONFIG_TRACING=y
++
++#
++# Tracers
++#
++# CONFIG_FUNCTION_TRACER is not set
++# CONFIG_IRQSOFF_TRACER is not set
++# CONFIG_SCHED_TRACER is not set
++# CONFIG_CONTEXT_SWITCH_TRACER is not set
++# CONFIG_BOOT_TRACER is not set
++# CONFIG_TRACE_BRANCH_PROFILING is not set
++# CONFIG_STACK_TRACER is not set
++# CONFIG_FTRACE_STARTUP_TEST is not set
++# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
++# CONFIG_SAMPLES is not set
++CONFIG_HAVE_ARCH_KGDB=y
++# CONFIG_KGDB is not set
++CONFIG_DEBUG_USER=y
++CONFIG_DEBUG_ERRORS=y
++# CONFIG_DEBUG_STACK_USAGE is not set
++# CONFIG_DEBUG_LL is not set
++
++#
++# Security options
++#
++# CONFIG_KEYS is not set
++# CONFIG_SECURITY is not set
++# CONFIG_SECURITYFS is not set
++# CONFIG_SECURITY_FILE_CAPABILITIES is not set
++CONFIG_XOR_BLOCKS=m
++CONFIG_ASYNC_CORE=m
++CONFIG_ASYNC_MEMCPY=m
++CONFIG_ASYNC_XOR=m
++CONFIG_CRYPTO=y
++
++#
++# Crypto core or helper
++#
++# CONFIG_CRYPTO_FIPS is not set
++CONFIG_CRYPTO_ALGAPI=y
++CONFIG_CRYPTO_ALGAPI2=y
++CONFIG_CRYPTO_AEAD2=y
++CONFIG_CRYPTO_BLKCIPHER=y
++CONFIG_CRYPTO_BLKCIPHER2=y
++CONFIG_CRYPTO_HASH=y
++CONFIG_CRYPTO_HASH2=y
++CONFIG_CRYPTO_RNG2=y
++CONFIG_CRYPTO_MANAGER=y
++CONFIG_CRYPTO_MANAGER2=y
++CONFIG_CRYPTO_GF128MUL=m
++CONFIG_CRYPTO_NULL=m
++CONFIG_CRYPTO_CRYPTD=m
++# CONFIG_CRYPTO_AUTHENC is not set
++CONFIG_CRYPTO_TEST=m
++
++#
++# Authenticated Encryption with Associated Data
++#
++# CONFIG_CRYPTO_CCM is not set
++# CONFIG_CRYPTO_GCM is not set
++# CONFIG_CRYPTO_SEQIV is not set
++
++#
++# Block modes
++#
++CONFIG_CRYPTO_CBC=y
++# CONFIG_CRYPTO_CTR is not set
++# CONFIG_CRYPTO_CTS is not set
++CONFIG_CRYPTO_ECB=y
++CONFIG_CRYPTO_LRW=m
++CONFIG_CRYPTO_PCBC=m
++# CONFIG_CRYPTO_XTS is not set
++
++#
++# Hash modes
++#
++CONFIG_CRYPTO_HMAC=m
++CONFIG_CRYPTO_XCBC=m
++
++#
++# Digest
++#
++CONFIG_CRYPTO_CRC32C=y
++CONFIG_CRYPTO_MD4=m
++CONFIG_CRYPTO_MD5=y
++CONFIG_CRYPTO_MICHAEL_MIC=y
++# CONFIG_CRYPTO_RMD128 is not set
++# CONFIG_CRYPTO_RMD160 is not set
++# CONFIG_CRYPTO_RMD256 is not set
++# CONFIG_CRYPTO_RMD320 is not set
++CONFIG_CRYPTO_SHA1=m
++CONFIG_CRYPTO_SHA256=m
++CONFIG_CRYPTO_SHA512=m
++CONFIG_CRYPTO_TGR192=m
++CONFIG_CRYPTO_WP512=m
++
++#
++# Ciphers
++#
++CONFIG_CRYPTO_AES=y
++CONFIG_CRYPTO_ANUBIS=m
++CONFIG_CRYPTO_ARC4=y
++CONFIG_CRYPTO_BLOWFISH=m
++CONFIG_CRYPTO_CAMELLIA=m
++CONFIG_CRYPTO_CAST5=m
++CONFIG_CRYPTO_CAST6=m
++CONFIG_CRYPTO_DES=y
++CONFIG_CRYPTO_FCRYPT=m
++CONFIG_CRYPTO_KHAZAD=m
++# CONFIG_CRYPTO_SALSA20 is not set
++# CONFIG_CRYPTO_SEED is not set
++CONFIG_CRYPTO_SERPENT=m
++CONFIG_CRYPTO_TEA=m
++CONFIG_CRYPTO_TWOFISH=m
++CONFIG_CRYPTO_TWOFISH_COMMON=m
++
++#
++# Compression
++#
++CONFIG_CRYPTO_DEFLATE=m
++# CONFIG_CRYPTO_LZO is not set
++
++#
++# Random Number Generation
++#
++# CONFIG_CRYPTO_ANSI_CPRNG is not set
++CONFIG_CRYPTO_HW=y
++
++#
++# Library routines
++#
++CONFIG_BITREVERSE=y
++CONFIG_GENERIC_FIND_LAST_BIT=y
++CONFIG_CRC_CCITT=y
++CONFIG_CRC16=m
++CONFIG_CRC_T10DIF=y
++CONFIG_CRC_ITU_T=y
++CONFIG_CRC32=y
++CONFIG_CRC7=y
++CONFIG_LIBCRC32C=y
++CONFIG_ZLIB_INFLATE=y
++CONFIG_ZLIB_DEFLATE=y
++CONFIG_LZO_COMPRESS=y
++CONFIG_LZO_DECOMPRESS=y
++CONFIG_PLIST=y
++CONFIG_HAS_IOMEM=y
++CONFIG_HAS_IOPORT=y
++CONFIG_HAS_DMA=y
+diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
+index 0a1099e..3c664a9 100644
+--- a/arch/arm/mach-omap2/board-3430sdp.c
++++ b/arch/arm/mach-omap2/board-3430sdp.c
+@@ -242,6 +243,35 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
+ 	},
+ };
+ 
++
++#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
++#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
++#if 0
++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	24
++#define SDP3430_LCD_PANEL_ENABLE_GPIO		28
++#else
++#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
++#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
++#endif
++
++#define PM_RECEIVER             TWL4030_MODULE_PM_RECEIVER
++#define ENABLE_VAUX2_DEDICATED  0x09
++#define ENABLE_VAUX2_DEV_GRP    0x20
++#define ENABLE_VAUX3_DEDICATED	0x03
++#define ENABLE_VAUX3_DEV_GRP	0x20
++
++#define ENABLE_VPLL2_DEDICATED	0x05
++#define ENABLE_VPLL2_DEV_GRP	0xE0
++#define TWL4030_VPLL2_DEV_GRP	0x33
++#define TWL4030_VPLL2_DEDICATED	0x36
++
++#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
++
++static unsigned backlight_gpio;
++static unsigned enable_gpio;
++static int lcd_enabled;
++static int dvi_enabled;
++
+ static struct platform_device sdp3430_lcd_device = {
+ 	.name		= "sdp2430_lcd",
+ 	.id		= -1,
+@@ -257,9 +287,198 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
+ 	.dev		= &sdp3430_lcd_device.dev,
+ };
+ 
++static void enable_vpll2(int enable)
++{
++	u8 ded_val, grp_val;
++
++	if (enable) {
++		ded_val = ENABLE_VPLL2_DEDICATED;
++		grp_val = ENABLE_VPLL2_DEV_GRP;
++	} else {
++		ded_val = 0;
++		grp_val = 0;
++	}
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ded_val, TWL4030_VPLL2_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			grp_val, TWL4030_VPLL2_DEV_GRP);
++}
++
++static int sdp3430_dsi_power_up(void)
++{
++	if (omap_rev() > OMAP3430_REV_ES1_0)
++		enable_vpll2(1);
++	return 0;
++}
++
++static void sdp3430_dsi_power_down(void)
++{
++	if (omap_rev() > OMAP3430_REV_ES1_0)
++		enable_vpll2(0);
++}
++
++static void __init sdp3430_display_init(void)
++{
++	int r;
++
++	enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
++	backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
++
++	r = gpio_request(enable_gpio, "LCD reset");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD reset GPIO\n");
++		goto err0;
++	}
++
++	r = gpio_request(backlight_gpio, "LCD Backlight");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD backlight GPIO\n");
++		goto err1;
++	}
++
++	gpio_direction_output(enable_gpio, 0);
++	gpio_direction_output(backlight_gpio, 0);
++
++	return;
++err1:
++	gpio_free(enable_gpio);
++err0:
++	return;
++}
++
++static int sdp3430_panel_enable_lcd(struct omap_display *display)
++{
++	u8 ded_val, ded_reg;
++	u8 grp_val, grp_reg;
++
++	if (dvi_enabled) {
++		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++		return -EINVAL;
++	}
++
++	ded_reg = TWL4030_VAUX3_DEDICATED;
++	ded_val = ENABLE_VAUX3_DEDICATED;
++	grp_reg = TWL4030_VAUX3_DEV_GRP;
++	grp_val = ENABLE_VAUX3_DEV_GRP;
++
++	gpio_direction_output(enable_gpio, 1);
++	gpio_direction_output(backlight_gpio, 1);
++
++	if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
++		return -EIO;
++	if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
++		return -EIO;
++
++	sdp3430_dsi_power_up();
++
++	lcd_enabled = 1;
++
++	return 0;
++}
++
++static void sdp3430_panel_disable_lcd(struct omap_display *display)
++{
++	lcd_enabled = 0;
++
++	sdp3430_dsi_power_down();
++
++	gpio_direction_output(enable_gpio, 0);
++	gpio_direction_output(backlight_gpio, 0);
++}
++
++static struct omap_dss_display_config sdp3430_display_data = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "lcd",
++	.panel_name = "sharp-ls037v7dw01",
++	.u.dpi.data_lines = 16,
++	.panel_enable = sdp3430_panel_enable_lcd,
++	.panel_disable = sdp3430_panel_disable_lcd,
++};
++
++static int sdp3430_panel_enable_dvi(struct omap_display *display)
++{
++	if (lcd_enabled) {
++		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++		return -EINVAL;
++	}
++
++	sdp3430_dsi_power_up();
++
++	dvi_enabled = 1;
++
++	return 0;
++}
++
++static void sdp3430_panel_disable_dvi(struct omap_display *display)
++{
++	sdp3430_dsi_power_down();
++
++	dvi_enabled = 0;
++}
++
++
++static struct omap_dss_display_config sdp3430_display_data_dvi = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.panel_name = "panel-generic",
++	.u.dpi.data_lines = 24,
++	.panel_enable = sdp3430_panel_enable_dvi,
++	.panel_disable = sdp3430_panel_disable_dvi,
++};
++
++static int sdp3430_panel_enable_tv(struct omap_display *display)
++{
++#define ENABLE_VDAC_DEDICATED           0x03
++#define ENABLE_VDAC_DEV_GRP             0x20
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEDICATED,
++			TWL4030_VDAC_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
++
++	return 0;
++}
++
++static void sdp3430_panel_disable_tv(struct omap_display *display)
++{
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEV_GRP);
++}
++
++static struct omap_dss_display_config sdp3430_display_data_tv = {
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.name = "tv",
++	.u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.panel_enable = sdp3430_panel_enable_tv,
++	.panel_disable = sdp3430_panel_disable_tv,
++};
++
++static struct omap_dss_board_info sdp3430_dss_data = {
++	.dsi_power_up = sdp3430_dsi_power_up,
++	.dsi_power_down = sdp3430_dsi_power_down,
++	.num_displays = 3,
++	.displays = {
++		&sdp3430_display_data,
++		&sdp3430_display_data_dvi,
++		&sdp3430_display_data_tv,
++	}
++};
++
++static struct platform_device sdp3430_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &sdp3430_dss_data,
++	},
++};
++
+ static struct platform_device *sdp3430_devices[] __initdata = {
+ 	&sdp3430_smc91x_device,
+-	&sdp3430_lcd_device,
++	&sdp3430_dss_device,
+ };
+ 
+ static inline void __init sdp3430_init_smc91x(void)
+@@ -306,13 +525,8 @@ static struct omap_uart_config sdp3430_uart_config __initdata = {
+ 	.enabled_uarts	= ((1 << 0) | (1 << 1) | (1 << 2)),
+ };
+ 
+-static struct omap_lcd_config sdp3430_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
+-};
+-
+ static struct omap_board_config_kernel sdp3430_config[] __initdata = {
+ 	{ OMAP_TAG_UART,	&sdp3430_uart_config },
+-	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
+ };
+ 
+ static int sdp3430_batt_table[] = {
+@@ -681,6 +895,7 @@ static void __init omap_3430sdp_init(void)
+ 	omap_serial_init();
+ 	usb_musb_init();
+ 	usb_ehci_init();
++	sdp3430_display_init();
+ }
+ 
+ static void __init omap_3430sdp_map_io(void)
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index 346351e..b67e7a5 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -30,6 +30,7 @@
+ 
+ #include <linux/regulator/machine.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+@@ -312,10 +314,6 @@ static void __init omap3_beagle_init_irq(void)
+ 	omap_gpio_init();
+ }
+ 
+-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
+-};
+-
+ static struct gpio_led gpio_leds[] = {
+ 	{
+ 		.name			= "beagleboard::usr0",
+@@ -369,13 +367,94 @@ static struct platform_device keys_gpio = {
+ 	},
+ };
+ 
++/* DSS */
++
++static int beagle_enable_dvi(struct omap_display *display)
++{
++	if (display->hw_config.panel_reset_gpio != -1)
++		gpio_direction_output(display->hw_config.panel_reset_gpio, 1);
++
++	return 0;
++}
++
++static void beagle_disable_dvi(struct omap_display *display)
++{
++	if (display->hw_config.panel_reset_gpio != -1)
++		gpio_direction_output(display->hw_config.panel_reset_gpio, 0);
++}
++
++static struct omap_dss_display_config beagle_display_data_dvi = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.panel_name = "panel-generic",
++	.u.dpi.data_lines = 24,
++	.panel_reset_gpio = 170,
++	.panel_enable = beagle_enable_dvi,
++	.panel_disable = beagle_disable_dvi,
++};
++
++
++static int beagle_panel_enable_tv(struct omap_display *display)
++{
++#define ENABLE_VDAC_DEDICATED           0x03
++#define ENABLE_VDAC_DEV_GRP             0x20
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEDICATED,
++			TWL4030_VDAC_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
++
++	return 0;
++}
++
++static void beagle_panel_disable_tv(struct omap_display *display)
++{
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEV_GRP);
++}
++
++static struct omap_dss_display_config beagle_display_data_tv = {
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.name = "tv",
++	.u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.panel_enable = beagle_panel_enable_tv,
++	.panel_disable = beagle_panel_disable_tv,
++};
++
++static struct omap_dss_board_info beagle_dss_data = {
++	.num_displays = 2,
++	.displays = {
++		&beagle_display_data_dvi,
++		&beagle_display_data_tv,
++	}
++};
++
++static struct platform_device beagle_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &beagle_dss_data,
++	},
++};
++
++static void __init beagle_display_init(void)
++{
++	int r;
++
++	r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset");
++	if (r < 0)
++		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
++}
++
+ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+ 	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
+-	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
+ };
+ 
+ static struct platform_device *omap3_beagle_devices[] __initdata = {
+-	&omap3_beagle_lcd_device,
++	&beagle_dss_device,
+ 	&leds_gpio,
+ 	&keys_gpio,
+ };
+@@ -428,13 +507,11 @@ static void __init omap3_beagle_init(void)
+ 	omap_serial_init();
+ 
+ 	omap_cfg_reg(J25_34XX_GPIO170);
+-	gpio_request(170, "DVI_nPD");
+-	/* REVISIT leave DVI powered down until it's needed ... */
+-	gpio_direction_output(170, true);
+ 
+ 	usb_musb_init();
+ 	usb_ehci_init();
+ 	omap3beagle_flash_init();
++	beagle_display_init();
+ }
+ 
+ static void __init omap3_beagle_map_io(void)
+diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
+index 024d7c4..6f5a866 100644
+--- a/arch/arm/mach-omap2/board-omap3evm.c
++++ b/arch/arm/mach-omap2/board-omap3evm.c
+@@ -216,13 +217,215 @@ static int __init omap3_evm_i2c_init(void)
+ 	return 0;
+ }
+ 
+-static struct platform_device omap3_evm_lcd_device = {
+-	.name		= "omap3evm_lcd",
+-	.id		= -1,
++#define LCD_PANEL_LR		2
++#define LCD_PANEL_UD		3
++#define LCD_PANEL_INI		152
++#define LCD_PANEL_ENABLE_GPIO	153
++#define LCD_PANEL_QVGA		154
++#define LCD_PANEL_RESB		155
++
++#define ENABLE_VDAC_DEDICATED	0x03
++#define ENABLE_VDAC_DEV_GRP	0x20
++#define ENABLE_VPLL2_DEDICATED	0x05
++#define ENABLE_VPLL2_DEV_GRP	0xE0
++
++#define TWL4030_GPIODATA_IN3	0x03
++#define TWL4030_GPIODATA_DIR3	0x06
++#define TWL4030_VPLL2_DEV_GRP	0x33
++#define TWL4030_VPLL2_DEDICATED	0x36
++
++static int lcd_enabled;
++static int dvi_enabled;
++
++static void __init omap3_evm_display_init(void)
++{
++	int r;
++	r = gpio_request(LCD_PANEL_LR, "lcd_panel_lr");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD_PANEL_LR\n");
++		return;
++	}
++	r = gpio_request(LCD_PANEL_UD, "lcd_panel_ud");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD_PANEL_UD\n");
++		goto err_1;
++	}
++
++	r = gpio_request(LCD_PANEL_INI, "lcd_panel_ini");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD_PANEL_INI\n");
++		goto err_2;
++	}
++	r = gpio_request(LCD_PANEL_RESB, "lcd_panel_resb");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD_PANEL_RESB\n");
++		goto err_3;
++	}
++	r = gpio_request(LCD_PANEL_QVGA, "lcd_panel_qvga");
++	if (r) {
++		printk(KERN_ERR "failed to get LCD_PANEL_QVGA\n");
++		goto err_4;
++	}
++
++	gpio_direction_output(LCD_PANEL_LR, 0);
++	gpio_direction_output(LCD_PANEL_UD, 0);
++	gpio_direction_output(LCD_PANEL_INI, 0);
++	gpio_direction_output(LCD_PANEL_RESB, 0);
++	gpio_direction_output(LCD_PANEL_QVGA, 0);
++
++#define TWL_LED_LEDEN           0x00
++#define TWL_PWMA_PWMAON         0x00
++#define TWL_PWMA_PWMAOFF        0x01
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
++
++	gpio_direction_output(LCD_PANEL_RESB, 1);
++	gpio_direction_output(LCD_PANEL_INI, 1);
++	gpio_direction_output(LCD_PANEL_QVGA, 0);
++	gpio_direction_output(LCD_PANEL_LR, 1);
++	gpio_direction_output(LCD_PANEL_UD, 1);
++
++	return;
++
++err_4:
++	gpio_free(LCD_PANEL_RESB);
++err_3:
++	gpio_free(LCD_PANEL_INI);
++err_2:
++	gpio_free(LCD_PANEL_UD);
++err_1:
++	gpio_free(LCD_PANEL_LR);
++
++}
++
++static int omap3_evm_panel_enable_lcd(struct omap_display *display)
++{
++	if (dvi_enabled) {
++		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++		return -EINVAL;
++	}
++	if (omap_rev() > OMAP3430_REV_ES1_0) {
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED);
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP);
++	}
++	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
++	lcd_enabled = 1;
++	return 0;
++}
++
++static void omap3_evm_panel_disable_lcd(struct omap_display *display)
++{
++	if (omap_rev() > OMAP3430_REV_ES1_0) {
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
++				TWL4030_VPLL2_DEDICATED);
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
++				TWL4030_VPLL2_DEV_GRP);
++	}
++	gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
++	lcd_enabled = 0;
++}
++
++static struct omap_dss_display_config omap3_evm_display_data = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "lcd",
++	.panel_name = "sharp-ls037v7dw01",
++	.u.dpi.data_lines = 18,
++	.panel_enable = omap3_evm_panel_enable_lcd,
++	.panel_disable = omap3_evm_panel_disable_lcd,
+ };
+ 
+-static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
++static int omap3_evm_panel_enable_tv(struct omap_display *display)
++{
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEDICATED, TWL4030_VDAC_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VDAC_DEV_GRP, TWL4030_VDAC_DEV_GRP);
++	return 0;
++}
++
++static void omap3_evm_panel_disable_tv(struct omap_display *display)
++{
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEDICATED);
++	twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x00,
++			TWL4030_VDAC_DEV_GRP);
++}
++
++static struct omap_dss_display_config omap3_evm_display_data_tv = {
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.name = "tv",
++	.u.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.panel_enable = omap3_evm_panel_enable_tv,
++	.panel_disable = omap3_evm_panel_disable_tv,
++};
++
++
++static int omap3_evm_panel_enable_dvi(struct omap_display *display)
++{
++	if (lcd_enabled) {
++		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++		return -EINVAL;
++	}
++	if (omap_rev() > OMAP3430_REV_ES1_0) {
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VPLL2_DEDICATED, TWL4030_VPLL2_DEDICATED);
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
++			ENABLE_VPLL2_DEV_GRP, TWL4030_VPLL2_DEV_GRP);
++	}
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80,
++			TWL4030_GPIODATA_IN3);
++	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80,
++			TWL4030_GPIODATA_DIR3);
++	dvi_enabled = 1;
++
++	return 0;
++}
++
++static void omap3_evm_panel_disable_dvi(struct omap_display *display)
++{
++	if (omap_rev() > OMAP3430_REV_ES1_0) {
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
++				TWL4030_VPLL2_DEDICATED);
++		twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x0,
++				TWL4030_VPLL2_DEV_GRP);
++	}
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00,
++			TWL4030_GPIODATA_IN3);
++	twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, 0x00,
++			TWL4030_GPIODATA_DIR3);
++	dvi_enabled = 0;
++}
++
++
++static struct omap_dss_display_config omap3_evm_display_data_dvi = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.panel_name = "panel-generic",
++	.u.dpi.data_lines = 24,
++	.panel_enable = omap3_evm_panel_enable_dvi,
++	.panel_disable = omap3_evm_panel_disable_dvi,
++};
++
++static struct omap_dss_board_info omap3_evm_dss_data = {
++	.num_displays = 3,
++	.displays = {
++		&omap3_evm_display_data,
++		&omap3_evm_display_data_dvi,
++		&omap3_evm_display_data_tv,
++	}
++};
++static struct platform_device omap3_evm_dss_device = {
++	.name		= "omapdss",
++	.id		= -1,
++	.dev            = {
++		.platform_data = &omap3_evm_dss_data,
++	},
+ };
+ 
+ static void ads7846_dev_init(void)
+@@ -281,11 +484,10 @@ static void __init omap3_evm_init_irq(void)
+ 
+ static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+ 	{ OMAP_TAG_UART,	&omap3_evm_uart_config },
+-	{ OMAP_TAG_LCD,		&omap3_evm_lcd_config },
+ };
+ 
+ static struct platform_device *omap3_evm_devices[] __initdata = {
+-	&omap3_evm_lcd_device,
++	&omap3_evm_dss_device,
+ 	&omap3evm_smc911x_device,
+ };
+ 
+@@ -305,6 +507,7 @@ static void __init omap3_evm_init(void)
+ 	usb_ehci_init();
+ 	omap3evm_flash_init();
+ 	ads7846_dev_init();
++	omap3_evm_display_init();
+ }
+ 
+ static void __init omap3_evm_map_io(void)
+diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
+index 071f4b0..267bb6b 100644
+--- a/arch/arm/mach-omap2/board-overo.c
++++ b/arch/arm/mach-omap2/board-overo.c
+@@ -41,6 +41,7 @@
+ #include <mach/board-overo.h>
+ #include <mach/board.h>
+ #include <mach/common.h>
++#include <mach/display.h>
+ #include <mach/gpio.h>
+ #include <mach/gpmc.h>
+ #include <mach/hardware.h>
+@@ -176,6 +177,9 @@ static void __init overo_ads7846_init(void)
+ static inline void __init overo_ads7846_init(void) { return; }
+ #endif
+ 
++static int lcd_enabled;
++static int dvi_enabled;
++
+ static struct mtd_partition overo_nand_partitions[] = {
+ 	{
+ 		.name           = "xloader",
+@@ -360,22 +364,101 @@ static void __init overo_init_irq(void)
+ 	omap_gpio_init();
+ }
+ 
+-static struct platform_device overo_lcd_device = {
+-	.name		= "overo_lcd",
+-	.id		= -1,
++/* DSS */
++
++#define OVERO_GPIO_LCD_EN 144
++
++static void __init overo_display_init(void)
++{
++	int r;
++
++	r = gpio_request(OVERO_GPIO_LCD_EN, "display enable");
++	if (r)
++		printk("fail1\n");
++	r = gpio_direction_output(OVERO_GPIO_LCD_EN, 1);
++	if (r)
++		printk("fail2\n");
++	gpio_export(OVERO_GPIO_LCD_EN, 0);
++}
++
++static int overo_panel_enable_dvi(struct omap_display *display)
++{
++	if (lcd_enabled) {
++		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
++		return -EINVAL;
++	}
++	dvi_enabled = 1;
++
++	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
++
++	return 0;
++}
++
++static void overo_panel_disable_dvi(struct omap_display *display)
++{
++	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
++
++	dvi_enabled = 0;
++}
++
++static struct omap_dss_display_config overo_display_data_dvi = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.panel_name = "panel-generic",
++	.u.dpi.data_lines = 24,
++	.panel_enable = overo_panel_enable_dvi,
++	.panel_disable = overo_panel_disable_dvi,
+ };
+ 
+-static struct omap_lcd_config overo_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
++static int overo_panel_enable_lcd(struct omap_display *display)
++{
++	if (dvi_enabled) {
++		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
++		return -EINVAL;
++	}
++
++	gpio_set_value(OVERO_GPIO_LCD_EN, 1);
++	lcd_enabled = 1;
++	return 0;
++}
++
++static void overo_panel_disable_lcd(struct omap_display *display)
++{
++	gpio_set_value(OVERO_GPIO_LCD_EN, 0);
++	lcd_enabled = 0;
++}
++
++static struct omap_dss_display_config overo_display_data_lcd = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "lcd43",
++	.panel_name = "samsung-lte430wq-f0c",
++	.u.dpi.data_lines = 24,
++	.panel_enable = overo_panel_enable_lcd,
++	.panel_disable = overo_panel_disable_lcd,
++ };
++
++static struct omap_dss_board_info overo_dss_data = {
++	.num_displays = 2,
++	.displays = {
++		&overo_display_data_dvi,
++		&overo_display_data_lcd,
++	}
++};
++
++static struct platform_device overo_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &overo_dss_data,
++	},
+ };
+ 
+ static struct omap_board_config_kernel overo_config[] __initdata = {
+ 	{ OMAP_TAG_UART,	&overo_uart_config },
+-	{ OMAP_TAG_LCD,		&overo_lcd_config },
+ };
+ 
+ static struct platform_device *overo_devices[] __initdata = {
+-	&overo_lcd_device,
++	&overo_dss_device,
+ };
+ 
+ static void __init overo_init(void)
+@@ -390,6 +473,7 @@ static void __init overo_init(void)
+ 	overo_flash_init();
+ 	overo_init_smsc911x();
+ 	overo_ads7846_init();
++	overo_display_init();
+ 
+ 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
+ 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch b/recipes/linux/linux-omap-pm/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch
new file mode 100644
index 0000000000..4c8d432dd5
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0008-DSS2-Add-function-to-display-object-to-get-the-back.patch
@@ -0,0 +1,39 @@
+From 4741076cae4f4284e1fff9a03f35475b8455af54 Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Wed, 1 Apr 2009 14:36:39 +0200
+Subject: [PATCH] DSS2: Add function to display object to get the backlight level
+
+This is needed by an upcoming patch that changes the backlight
+initialization to use the backlight level set by the bootloader.
+
+Also add a field for the maximum backlight level.
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ arch/arm/plat-omap/include/mach/display.h |    3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+index 6288353..6b702c7 100644
+--- a/arch/arm/plat-omap/include/mach/display.h
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -211,6 +211,8 @@ struct omap_dss_display_config {
+ 	int panel_reset_gpio;
+ 	int ctrl_reset_gpio;
+ 
++	int max_backlight_level;
++
+ 	const char *name;		/* for debug */
+ 	const char *ctrl_name;
+ 	const char *panel_name;
+@@ -225,6 +227,7 @@ struct omap_dss_display_config {
+ 	void (*ctrl_disable)(struct omap_display *display);
+ 	int (*set_backlight)(struct omap_display *display,
+ 			int level);
++	int (*get_backlight)(struct omap_display *display);
+ };
+ 
+ struct device;
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0009-DSS2-Add-acx565akm-panel.patch b/recipes/linux/linux-omap-pm/dss2/0009-DSS2-Add-acx565akm-panel.patch
new file mode 100644
index 0000000000..3f55f04460
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0009-DSS2-Add-acx565akm-panel.patch
@@ -0,0 +1,778 @@
+From 66e16f86d3f4c5b34b37e965c65102b7192371de Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Thu, 2 Apr 2009 11:47:13 +0300
+Subject: [PATCH] DSS2: Add acx565akm panel
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ drivers/video/omap2/displays/Kconfig           |    8 +
+ drivers/video/omap2/displays/Makefile          |    2 +
+ drivers/video/omap2/displays/panel-acx565akm.c |  712 ++++++++++++++++++++++++
+ drivers/video/omap2/displays/panel-acx565akm.h |    9 +
+ 4 files changed, 731 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/video/omap2/displays/panel-acx565akm.c
+ create mode 100644 drivers/video/omap2/displays/panel-acx565akm.h
+
+diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
+index 356ceb1..3feecee 100644
+--- a/drivers/video/omap2/displays/Kconfig
++++ b/drivers/video/omap2/displays/Kconfig
+@@ -28,4 +28,12 @@ config CTRL_BLIZZARD
+         tristate "Blizzard Controller"
+         help
+           Blizzard Controller (hack)
++
++config PANEL_ACX565AKM
++        tristate "ACX565AKM LCD Panel"
++        depends on OMAP2_DSS_SDI
++        select BACKLIGHT_CLASS_DEVICE
++        help
++          LCD Panel used in RX51
++
+ endmenu
+diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
+index 1b74b7e..9bafcb6 100644
+--- a/drivers/video/omap2/displays/Makefile
++++ b/drivers/video/omap2/displays/Makefile
+@@ -4,3 +4,5 @@ obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+ 
+ obj-$(CONFIG_CTRL_BLIZZARD) += ctrl-blizzard.o
+ obj-$(CONFIG_PANEL_N800) += panel-n800.o
++
++obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
+diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
+new file mode 100644
+index 0000000..2679d6c
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-acx565akm.c
+@@ -0,0 +1,712 @@
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++#include <linux/spi/spi.h>
++#include <linux/jiffies.h>
++#include <linux/sched.h>
++#include <linux/backlight.h>
++#include <linux/fb.h>
++
++#include <mach/display.h>
++#include <mach/dma.h>
++
++#include "panel-acx565akm.h"
++
++#define MIPID_CMD_READ_DISP_ID         0x04
++#define MIPID_CMD_READ_RED             0x06
++#define MIPID_CMD_READ_GREEN           0x07
++#define MIPID_CMD_READ_BLUE            0x08
++#define MIPID_CMD_READ_DISP_STATUS     0x09
++#define MIPID_CMD_RDDSDR               0x0F
++#define MIPID_CMD_SLEEP_IN             0x10
++#define MIPID_CMD_SLEEP_OUT            0x11
++#define MIPID_CMD_DISP_OFF             0x28
++#define MIPID_CMD_DISP_ON              0x29
++#define MIPID_CMD_WRITE_DISP_BRIGHTNESS        0x51
++#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52
++#define MIPID_CMD_WRITE_CTRL_DISP      0x53
++
++#define CTRL_DISP_BRIGHTNESS_CTRL_ON   (1 << 5)
++#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON        (1 << 4)
++#define CTRL_DISP_BACKLIGHT_ON         (1 << 2)
++#define CTRL_DISP_AUTO_BRIGHTNESS_ON   (1 << 1)
++
++#define MIPID_CMD_READ_CTRL_DISP       0x54
++#define MIPID_CMD_WRITE_CABC           0x55
++#define MIPID_CMD_READ_CABC            0x56
++
++#define MIPID_VER_LPH8923              3
++#define MIPID_VER_LS041Y3              4
++#define MIPID_VER_L4F00311             8
++#define MIPID_VER_ACX565AKM            9
++
++struct acx565akm_device {
++       struct backlight_device *bl_dev;
++       int             enabled;
++       int             model;
++       int             revision;
++       u8              display_id[3];
++       int             has_bc:1;
++       int             has_cabc:1;
++       unsigned int    saved_bklight_level;
++       unsigned long   hw_guard_end;           /* next value of jiffies
++                                                  when we can issue the
++                                                  next sleep in/out command */
++       unsigned long   hw_guard_wait;          /* max guard time in jiffies */
++
++       struct spi_device       *spi;
++       struct mutex            mutex;
++       struct omap_panel       panel;
++       struct omap_display     *display;
++};
++
++static int acx565akm_bl_update_status(struct backlight_device *dev);
++
++static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
++                             const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
++{
++       struct spi_message      m;
++       struct spi_transfer     *x, xfer[5];
++       int                     r;
++
++       BUG_ON(md->spi == NULL);
++
++       spi_message_init(&m);
++
++       memset(xfer, 0, sizeof(xfer));
++       x = &xfer[0];
++
++       cmd &=  0xff;
++       x->tx_buf       = &cmd;
++       x->bits_per_word = 9;
++       x->len          = 2;
++
++       if (rlen > 1 && wlen == 0) {
++               /*
++                * Between the command and the response data there is a
++                * dummy clock cycle. Add an extra bit after the command
++                * word to account for this.
++                */
++               x->bits_per_word = 10;
++               cmd <<= 1;
++       }
++       spi_message_add_tail(x, &m);
++
++       if (wlen) {
++               x++;
++               x->tx_buf       = wbuf;
++               x->len          = wlen;
++               x->bits_per_word = 9;
++               spi_message_add_tail(x, &m);
++       }
++
++       if (rlen) {
++               x++;
++               x->rx_buf       = rbuf;
++               x->len          = rlen;
++               spi_message_add_tail(x, &m);
++       }
++
++       r = spi_sync(md->spi, &m);
++       if (r < 0)
++               dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
++}
++
++static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
++{
++       acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
++}
++
++static inline void acx565akm_write(struct acx565akm_device *md,
++                              int reg, const u8 *buf, int len)
++{
++       acx565akm_transfer(md, reg, buf, len, NULL, 0);
++}
++
++static inline void acx565akm_read(struct acx565akm_device *md,
++                             int reg, u8 *buf, int len)
++{
++       acx565akm_transfer(md, reg, NULL, 0, buf, len);
++}
++
++static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
++{
++       md->hw_guard_wait = msecs_to_jiffies(guard_msec);
++       md->hw_guard_end = jiffies + md->hw_guard_wait;
++}
++
++static void hw_guard_wait(struct acx565akm_device *md)
++{
++       unsigned long wait = md->hw_guard_end - jiffies;
++
++       if ((long)wait > 0 && wait <= md->hw_guard_wait) {
++               set_current_state(TASK_UNINTERRUPTIBLE);
++               schedule_timeout(wait);
++       }
++}
++
++static void set_sleep_mode(struct acx565akm_device *md, int on)
++{
++       int cmd, sleep_time = 50;
++
++       if (on)
++               cmd = MIPID_CMD_SLEEP_IN;
++       else
++               cmd = MIPID_CMD_SLEEP_OUT;
++       hw_guard_wait(md);
++       acx565akm_cmd(md, cmd);
++       hw_guard_start(md, 120);
++       /*
++        * When we enable the panel, it seems we _have_ to sleep
++        * 120 ms before sending the init string. When disabling the
++        * panel we'll sleep for the duration of 2 frames, so that the
++        * controller can still provide the PCLK,HS,VS signals. */
++       if (!on)
++               sleep_time = 120;
++       msleep(sleep_time);
++}
++
++static void set_display_state(struct acx565akm_device *md, int enabled)
++{
++       int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
++
++       acx565akm_cmd(md, cmd);
++}
++
++static int panel_enabled(struct acx565akm_device *md)
++{
++       u32 disp_status;
++       int enabled;
++
++       acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
++       disp_status = __be32_to_cpu(disp_status);
++       enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
++       dev_dbg(&md->spi->dev,
++               "LCD panel %senabled by bootloader (status 0x%04x)\n",
++               enabled ? "" : "not ", disp_status);
++       return enabled;
++}
++
++static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
++{
++       u16 ctrl;
++
++       acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
++       if (enable) {
++               ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
++                       CTRL_DISP_BACKLIGHT_ON;
++       } else {
++               ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
++                         CTRL_DISP_BACKLIGHT_ON);
++       }
++
++       ctrl |= 1 << 8;
++       acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
++}
++
++static void set_cabc_mode(struct acx565akm_device *md, int mode)
++{
++       u16 cabc_ctrl;
++
++       cabc_ctrl = 0;
++       acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
++       cabc_ctrl &= ~3;
++       cabc_ctrl |= (1 << 8) | (mode & 3);
++       acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
++}
++
++static int get_cabc_mode(struct acx565akm_device *md)
++{
++       u8 cabc_ctrl;
++
++       acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
++       return cabc_ctrl & 3;
++}
++
++static int panel_detect(struct acx565akm_device *md)
++{
++       acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
++       dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
++               md->display_id[0], md->display_id[1], md->display_id[2]);
++
++       switch (md->display_id[0]) {
++       case 0x10:
++               md->model = MIPID_VER_ACX565AKM;
++               md->panel.name = "acx565akm";
++               md->has_bc = 1;
++               md->has_cabc = 1;
++               break;
++       case 0x29:
++               md->model = MIPID_VER_L4F00311;
++               md->panel.name = "l4f00311";
++               break;
++       case 0x45:
++               md->model = MIPID_VER_LPH8923;
++               md->panel.name = "lph8923";
++               break;
++       case 0x83:
++               md->model = MIPID_VER_LS041Y3;
++               md->panel.name = "ls041y3";
++               break;
++       default:
++               md->panel.name = "unknown";
++               dev_err(&md->spi->dev, "invalid display ID\n");
++               return -ENODEV;
++       }
++
++       md->revision = md->display_id[1];
++
++       pr_info("omapfb: %s rev %02x LCD detected\n",
++                       md->panel.name, md->revision);
++
++       return 0;
++}
++
++static int acx565akm_panel_enable(struct omap_display *display)
++{
++       struct acx565akm_device *md =
++               (struct acx565akm_device *)display->panel->priv;
++
++       dev_dbg(&md->spi->dev, "%s\n", __func__);
++
++       mutex_lock(&md->mutex);
++
++       if (display->hw_config.panel_enable)
++               display->hw_config.panel_enable(display);
++
++       md->enabled = panel_enabled(md);
++
++       if (md->enabled) {
++               dev_dbg(&md->spi->dev, "panel already enabled\n");
++               mutex_unlock(&md->mutex);
++               return 0;
++       }
++
++       set_sleep_mode(md, 0);
++       md->enabled = 1;
++       set_display_state(md, 1);
++
++       mutex_unlock(&md->mutex);
++
++       return acx565akm_bl_update_status(md->bl_dev);
++}
++
++static void acx565akm_panel_disable(struct omap_display *display)
++{
++       struct acx565akm_device *md =
++               (struct acx565akm_device *)display->panel->priv;
++
++       dev_dbg(&md->spi->dev, "%s\n", __func__);
++
++       mutex_lock(&md->mutex);
++
++       if (!md->enabled) {
++               mutex_unlock(&md->mutex);
++               return;
++       }
++       set_display_state(md, 0);
++       set_sleep_mode(md, 1);
++       md->enabled = 0;
++
++       if (display->hw_config.panel_disable)
++               display->hw_config.panel_disable(display);
++
++       mutex_unlock(&md->mutex);
++}
++
++#if 0
++static void acx565akm_set_mode(struct omap_display *display,
++                             int x_res, int y_res, int bpp)
++{
++       struct acx565akm_device *md =
++               (struct acx565akm_device *)display->panel->priv;
++       u16 par;
++
++       switch (bpp) {
++       case 16:
++               par = 0x150;
++               break;
++       case 18:
++               par = 0x160;
++               break;
++       case 24:
++               par = 0x170;
++               break;
++       }
++
++       acx565akm_write(md, 0x3a, (u8 *)&par, 2);
++}
++#endif
++
++static int acx565akm_panel_suspend(struct omap_display *display)
++{
++       acx565akm_panel_disable(display);
++       return 0;
++}
++
++static int acx565akm_panel_resume(struct omap_display *display)
++{
++       return acx565akm_panel_enable(display);
++}
++
++static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
++{
++       int bv;
++
++       bv = level | (1 << 8);
++       acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
++
++       if (level)
++               enable_backlight_ctrl(md, 1);
++       else
++               enable_backlight_ctrl(md, 0);
++}
++
++static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
++{
++       u8 bv;
++
++       acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
++
++       return bv;
++}
++
++static int acx565akm_bl_update_status(struct backlight_device *dev)
++{
++       struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
++       struct omap_display *display = md->display;
++       int r;
++       int level;
++
++       dev_dbg(&md->spi->dev, "%s\n", __func__);
++
++       if (display->hw_config.set_backlight == NULL)
++               return -ENODEV;
++
++       mutex_lock(&md->mutex);
++
++       if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
++                       dev->props.power == FB_BLANK_UNBLANK)
++               level = dev->props.brightness;
++       else
++               level = 0;
++
++       r = 0;
++       if (md->has_bc)
++               acx565akm_set_brightness(md, level);
++       else
++               if (display->hw_config.set_backlight != NULL)
++                       r = display->hw_config.set_backlight(display, level);
++       else
++               r = -ENODEV;
++
++       mutex_unlock(&md->mutex);
++
++       return r;
++}
++
++static int acx565akm_bl_get_intensity(struct backlight_device *dev)
++{
++       struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
++       struct omap_display *display = md->display;
++
++       dev_dbg(&dev->dev, "%s\n", __func__);
++
++       if (md->has_bc && display->hw_config.set_backlight == NULL)
++               return -ENODEV;
++
++       if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
++                       dev->props.power == FB_BLANK_UNBLANK) {
++               if (md->has_bc)
++                       return acx565akm_get_actual_brightness(md);
++               else
++                       return dev->props.brightness;
++       }
++
++       return 0;
++}
++
++static struct backlight_ops acx565akm_bl_ops = {
++       .get_brightness = acx565akm_bl_get_intensity,
++       .update_status  = acx565akm_bl_update_status,
++};
++
++static const char *cabc_modes[] = {
++       "off",          /* used also always when CABC is not supported */
++       "ui",
++       "still-image",
++       "moving-image",
++};
++
++static ssize_t show_cabc_mode(struct device *dev,
++               struct device_attribute *attr,
++               char *buf)
++{
++       struct acx565akm_device *md = dev_get_drvdata(dev);
++       const char *mode_str;
++       int mode;
++       int len;
++
++       if (!md->has_cabc)
++               mode = 0;
++       else
++               mode = get_cabc_mode(md);
++       mode_str = "unknown";
++       if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
++               mode_str = cabc_modes[mode];
++       len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
++
++       return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
++}
++
++static ssize_t store_cabc_mode(struct device *dev,
++               struct device_attribute *attr,
++               const char *buf, size_t count)
++{
++       struct acx565akm_device *md = dev_get_drvdata(dev);
++       int i;
++
++       for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
++               const char *mode_str = cabc_modes[i];
++               int cmp_len = strlen(mode_str);
++
++               if (count > 0 && buf[count - 1] == '\n')
++                       count--;
++               if (count != cmp_len)
++                       continue;
++
++               if (strncmp(buf, mode_str, cmp_len) == 0)
++                       break;
++       }
++
++       if (i == ARRAY_SIZE(cabc_modes))
++               return -EINVAL;
++
++       if (!md->has_cabc && i != 0)
++               return -EINVAL;
++
++       mutex_lock(&md->mutex);
++       set_cabc_mode(md, i);
++       mutex_unlock(&md->mutex);
++
++       return count;
++}
++
++static ssize_t show_cabc_available_modes(struct device *dev,
++               struct device_attribute *attr,
++               char *buf)
++{
++       struct acx565akm_device *md = dev_get_drvdata(dev);
++       int len;
++       int i;
++
++       if (!md->has_cabc)
++               return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
++
++       for (i = 0, len = 0;
++            len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
++               len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
++                       i ? " " : "", cabc_modes[i],
++                       i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
++
++       return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
++}
++
++static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
++               show_cabc_mode, store_cabc_mode);
++static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
++               show_cabc_available_modes, NULL);
++
++static struct attribute *bldev_attrs[] = {
++       &dev_attr_cabc_mode.attr,
++       &dev_attr_cabc_available_modes.attr,
++       NULL,
++};
++
++static struct attribute_group bldev_attr_group = {
++       .attrs = bldev_attrs,
++};
++
++static int acx565akm_panel_init(struct omap_display *display)
++{
++       struct omap_panel *panel = display->panel;
++       struct acx565akm_panel_data *panel_data = display->hw_config.panel_data;
++       struct acx565akm_device *md = (struct acx565akm_device *)panel->priv;
++
++       struct backlight_device *bldev;
++       int brightness;
++       int max_brightness;
++       int r;
++
++       dev_dbg(&md->spi->dev, "%s\n", __func__);
++
++       if (!panel_data) {
++               dev_err(&md->spi->dev, "no panel data\n");
++               return -ENODEV;
++       }
++
++       mutex_init(&md->mutex);
++       md->display = display;
++
++       if (display->hw_config.panel_enable)
++               display->hw_config.panel_enable(display);
++
++       md->enabled = panel_enabled(md);
++
++       r = panel_detect(md);
++       if (r) {
++               if (!md->enabled && display->hw_config.panel_disable)
++                       display->hw_config.panel_disable(display);
++               mutex_unlock(&md->mutex);
++               return r;
++       }
++
++       if (!panel_data->bc_connected) {
++               md->has_bc = 0;
++               md->has_cabc = 0;
++       }
++
++#if 0
++       acx565akm_set_mode(display, panel->timings.x_res, panel->timings.y_res,
++                         panel->bpp);
++#endif
++
++       if (!md->enabled)
++               display->hw_config.panel_disable(display);
++
++       bldev = backlight_device_register("acx565akm", &md->spi->dev,
++                       md, &acx565akm_bl_ops);
++       md->bl_dev = bldev;
++
++       if (md->has_cabc) {
++               r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
++               if (r) {
++                       dev_err(&bldev->dev, "failed to create sysfs files\n");
++                       backlight_device_unregister(bldev);
++                       return r;
++               }
++       }
++
++       bldev->props.fb_blank = FB_BLANK_UNBLANK;
++       bldev->props.power = FB_BLANK_UNBLANK;
++
++       if (md->has_bc)
++               max_brightness = 255;
++       else
++               max_brightness = display->hw_config.max_backlight_level;
++
++       if (md->has_bc)
++               brightness = acx565akm_get_actual_brightness(md);
++       else {
++               if (display->hw_config.get_backlight != NULL)
++                       brightness = display->hw_config.get_backlight(display);
++               else
++                       brightness = 0;
++       }
++
++       bldev->props.max_brightness = max_brightness;
++       bldev->props.brightness = brightness;
++       acx565akm_bl_update_status(bldev);
++
++       return 0;
++}
++
++static struct omap_panel acx565akm_panel = {
++       .name           = "panel-acx565akm",
++       .init           = acx565akm_panel_init,
++       .suspend        = acx565akm_panel_suspend,
++       .resume         = acx565akm_panel_resume,
++       .enable         = acx565akm_panel_enable,
++       .disable        = acx565akm_panel_disable,
++
++       .timings = {
++               .x_res = 800,
++               .y_res = 480,
++
++               .pixel_clock    = 24000,
++
++               .hsw            = 4,
++               .hfp            = 16,
++               .hbp            = 12,
++
++               .vsw            = 3,
++               .vfp            = 3,
++               .vbp            = 3,
++       },
++
++       .config         = OMAP_DSS_LCD_TFT,
++
++       .recommended_bpp = 16,
++
++       /*
++        * supported modes: 12bpp(444), 16bpp(565), 18bpp(666),  24bpp(888)
++        * resolutions.
++        */
++};
++
++static int acx565akm_spi_probe(struct spi_device *spi)
++{
++       struct acx565akm_device *md;
++
++       dev_dbg(&md->spi->dev, "%s\n", __func__);
++
++       md = kzalloc(sizeof(*md), GFP_KERNEL);
++       if (md == NULL) {
++               dev_err(&spi->dev, "out of memory\n");
++               return -ENOMEM;
++       }
++
++       spi->mode = SPI_MODE_3;
++       md->spi = spi;
++       dev_set_drvdata(&spi->dev, md);
++       md->panel = acx565akm_panel;
++       acx565akm_panel.priv = md;
++
++       omap_dss_register_panel(&acx565akm_panel);
++
++       return 0;
++}
++
++static int acx565akm_spi_remove(struct spi_device *spi)
++{
++       struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
++
++       dev_dbg(&md->spi->dev, "%s\n", __func__);
++
++       sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
++       backlight_device_unregister(md->bl_dev);
++       omap_dss_unregister_panel(&acx565akm_panel);
++
++       kfree(md);
++
++       return 0;
++}
++
++static struct spi_driver acx565akm_spi_driver = {
++       .driver = {
++               .name   = "acx565akm",
++               .bus    = &spi_bus_type,
++               .owner  = THIS_MODULE,
++       },
++       .probe  = acx565akm_spi_probe,
++       .remove = __devexit_p(acx565akm_spi_remove),
++};
++
++static int __init acx565akm_init(void)
++{
++       return spi_register_driver(&acx565akm_spi_driver);
++}
++
++static void __exit acx565akm_exit(void)
++{
++       spi_unregister_driver(&acx565akm_spi_driver);
++}
++
++module_init(acx565akm_init);
++module_exit(acx565akm_exit);
++
++MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
++MODULE_DESCRIPTION("acx565akm LCD Driver");
++MODULE_LICENSE("GPL");
+diff --git a/drivers/video/omap2/displays/panel-acx565akm.h b/drivers/video/omap2/displays/panel-acx565akm.h
+new file mode 100644
+index 0000000..6d3727b
+--- /dev/null
++++ b/drivers/video/omap2/displays/panel-acx565akm.h
+@@ -0,0 +1,9 @@
++#ifndef __DRIVERS_VIDEO_OMAP2_DISPLAYS_PANEL_ACX565AKM_H
++#define __DRIVERS_VIDEO_OMAP2_DISPLAYS_PANEL_ACX565AKM_H
++
++struct acx565akm_panel_data {
++       unsigned bc_connected:1;
++};
++
++#endif
++
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch b/recipes/linux/linux-omap-pm/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch
new file mode 100644
index 0000000000..c7efc58a05
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0010-DSS2-Small-VRFB-context-allocation-bug-fixed.patch
@@ -0,0 +1,28 @@
+From 370510e24ddbf539392ebb6a1e43280965fcb19b Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Tue, 31 Mar 2009 18:47:32 +0530
+Subject: [PATCH] DSS2: Small VRFB context allocation bug fixed
+
+This is minor bug while requesting and mapping memory for
+VRFB space.
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 852abe5..44febef 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -1193,6 +1193,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+ 
+ 		if(!va) {
+ 			printk(KERN_ERR "vrfb: ioremap failed\n");
++			omap_vrfb_release_ctx(&rg->vrfb);
+ 			return -ENOMEM;
+ 		}
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch b/recipes/linux/linux-omap-pm/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch
new file mode 100644
index 0000000000..1a82ed2a22
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0011-DSS2-Allocated-memory-for-Color-Look-up-table.patch
@@ -0,0 +1,37 @@
+From 370d1f93a32e8fcaeac5c16574417e354af21d08 Mon Sep 17 00:00:00 2001
+From: Vaibhav Hiremath <hvaibhav@ti.com>
+Date: Tue, 31 Mar 2009 18:38:31 +0530
+Subject: [PATCH] DSS2: Allocated memory for Color Look-up-table
+
+We were not allocating memory for CMAP buffer and due to that
+G_CMAP was failing, since it does check for size of CMAP buffer.
+
+Called "fb_alloc_cmap" for llocating memory for CMAP.
+
+We are currently not supporting 1,2,4,8 bpp, so meaning less
+for us as of now. But for completeness this is required.
+
+Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 44febef..afe40a9 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -1525,6 +1525,11 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
+ 		goto err;
+ 
+ 	set_fb_fix(fbi);
++
++	r = fb_alloc_cmap(&fbi->cmap, 256, 0);
++	if (r)
++		dev_err(fbdev->dev, "unable to allocate color map memory\n");
++
+ err:
+ 	return r;
+ }
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0012-DSS2-Fix-DMA-rotation.patch b/recipes/linux/linux-omap-pm/dss2/0012-DSS2-Fix-DMA-rotation.patch
new file mode 100644
index 0000000000..22add6efd2
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0012-DSS2-Fix-DMA-rotation.patch
@@ -0,0 +1,65 @@
+From 9c93bcab724b5935d745604773ed43825efefd87 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 13:47:11 +0300
+Subject: [PATCH] DSS2: Fix DMA rotation
+
+u16 was not a good type for offsets. First, they need to be signed,
+and second, 16 bits is not enough.
+---
+ drivers/video/omap2/dss/dispc.c |   12 ++++++------
+ 1 files changed, 6 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index ffb5648..6cea545 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -778,7 +778,7 @@ static void _dispc_set_vid_size(enum omap_plane plane, int width, int height)
+ 	dispc_write_reg(vsi_reg[plane-1], val);
+ }
+ 
+-static void _dispc_set_pix_inc(enum omap_plane plane, u16 inc)
++static void _dispc_set_pix_inc(enum omap_plane plane, s32 inc)
+ {
+ 	const struct dispc_reg ri_reg[] = { DISPC_GFX_PIXEL_INC,
+ 				     DISPC_VID_PIXEL_INC(0),
+@@ -787,7 +787,7 @@ static void _dispc_set_pix_inc(enum omap_plane plane, u16 inc)
+ 	dispc_write_reg(ri_reg[plane], inc);
+ }
+ 
+-static void _dispc_set_row_inc(enum omap_plane plane, u16 inc)
++static void _dispc_set_row_inc(enum omap_plane plane, s32 inc)
+ {
+ 	const struct dispc_reg ri_reg[] = { DISPC_GFX_ROW_INC,
+ 				     DISPC_VID_ROW_INC(0),
+@@ -1123,7 +1123,7 @@ static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation,
+ 	}
+ }
+ 
+-static int pixinc(int pixels, u8 ps)
++static s32 pixinc(int pixels, u8 ps)
+ {
+ 	if (pixels == 1)
+ 		return 1;
+@@ -1140,7 +1140,7 @@ static void calc_rotation_offset(u8 rotation, bool mirror,
+ 		u16 width, u16 height,
+ 		enum omap_color_mode color_mode, bool fieldmode,
+ 		unsigned *offset0, unsigned *offset1,
+-		u16 *row_inc, u16 *pix_inc)
++		s32 *row_inc, s32 *pix_inc)
+ {
+ 	u8 ps;
+ 	u16 fbw, fbh;
+@@ -1298,8 +1298,8 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	bool fieldmode = 0;
+ 	int cconv = 0;
+ 	unsigned offset0, offset1;
+-	u16 row_inc;
+-	u16 pix_inc;
++	s32 row_inc;
++	s32 pix_inc;
+ 
+ 	if (plane == OMAP_DSS_GFX) {
+ 		if (width != out_width || height != out_height)
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch b/recipes/linux/linux-omap-pm/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch
new file mode 100644
index 0000000000..76b8c73630
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0013-DSS2-Verify-that-overlay-paddr-0.patch
@@ -0,0 +1,41 @@
+From 360a55ddd309e3a45b227a4a905ae7120dd16169 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 14:21:12 +0300
+Subject: [PATCH] DSS2: Verify that overlay paddr != 0
+
+---
+ drivers/video/omap2/dss/dispc.c   |    3 +++
+ drivers/video/omap2/dss/overlay.c |    3 +++
+ 2 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 6cea545..2480a03 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1301,6 +1301,9 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	s32 row_inc;
+ 	s32 pix_inc;
+ 
++	if (paddr == 0)
++		return -EINVAL;
++
+ 	if (plane == OMAP_DSS_GFX) {
+ 		if (width != out_width || height != out_height)
+ 			return -EINVAL;
+diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
+index 968edbe..9209acf 100644
+--- a/drivers/video/omap2/dss/overlay.c
++++ b/drivers/video/omap2/dss/overlay.c
+@@ -331,6 +331,9 @@ static int dss_ovl_set_overlay_info(struct omap_overlay *ovl,
+ 	int r;
+ 	struct omap_overlay_info old_info;
+ 
++	if (info->paddr == 0)
++		return -EINVAL;
++
+ 	old_info = ovl->info;
+ 	ovl->info = *info;
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch b/recipes/linux/linux-omap-pm/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch
new file mode 100644
index 0000000000..3b3fd77a9a
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0014-DSS2-Add-function-to-get-DSS-logic-clock-rate.patch
@@ -0,0 +1,51 @@
+From 832b763db235da8e62f7b6ab02bcb8ad6bcb7a01 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 16:48:41 +0300
+Subject: [PATCH] DSS2: Add function to get DSS logic clock rate
+
+---
+ drivers/video/omap2/dss/dispc.c |   15 +++++++++++++++
+ drivers/video/omap2/dss/dss.h   |    1 +
+ 2 files changed, 16 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 2480a03..1bc23f7 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1850,6 +1850,21 @@ unsigned long dispc_fclk_rate(void)
+ 	return r;
+ }
+ 
++unsigned long dispc_lclk_rate(void)
++{
++	int lcd;
++	unsigned long r;
++	u32 l;
++
++	l = dispc_read_reg(DISPC_DIVISOR);
++
++	lcd = FLD_GET(l, 23, 16);
++
++	r = dispc_fclk_rate();
++
++	return r / lcd;
++}
++
+ unsigned long dispc_pclk_rate(void)
+ {
+ 	int lcd, pcd;
+diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
+index bac5ece..0be42b6 100644
+--- a/drivers/video/omap2/dss/dss.h
++++ b/drivers/video/omap2/dss/dss.h
+@@ -294,6 +294,7 @@ bool dispc_trans_key_enabled(enum omap_channel ch);
+ 
+ void dispc_set_lcd_timings(struct omap_video_timings *timings);
+ unsigned long dispc_fclk_rate(void);
++unsigned long dispc_lclk_rate(void);
+ unsigned long dispc_pclk_rate(void);
+ void dispc_set_pol_freq(struct omap_panel *panel);
+ void find_lck_pck_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch b/recipes/linux/linux-omap-pm/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch
new file mode 100644
index 0000000000..d6b0cbbb41
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0015-DSS2-DSI-calculate-VP_CLK_RATIO-properly.patch
@@ -0,0 +1,68 @@
+From a5c235a6f0094494ae1fc1a1ba4728e0d33dfd3b Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 16:49:27 +0300
+Subject: [PATCH] DSS2: DSI: calculate VP_CLK_RATIO properly
+
+---
+ drivers/video/omap2/dss/dsi.c |   17 +++++++++++------
+ 1 files changed, 11 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
+index 4442931..aecb89d 100644
+--- a/drivers/video/omap2/dss/dsi.c
++++ b/drivers/video/omap2/dss/dsi.c
+@@ -1104,7 +1104,10 @@ int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv)
+ 	enable_clocks(1);
+ 	dsi_enable_pll_clock(1);
+ 
+-	/* configure dispc fck and pixel clock to something sane */
++	/* XXX this should be calculated depending on the screen size,
++	 * required framerate and DSI speed.
++	 * For now 48MHz is enough for 864x480@60 with 360Mbps/lane
++	 * with two lanes */
+ 	r = dispc_calc_clock_div(1, 48 * 1000 * 1000, &cinfo);
+ 	if (r)
+ 		goto err0;
+@@ -1119,7 +1122,7 @@ int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv)
+ 	if (r)
+ 		goto err0;
+ 
+-	/* PLL does not come out of reset without this... */
++	/* XXX PLL does not come out of reset without this... */
+ 	dispc_pck_free_enable(1);
+ 
+ 	if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
+@@ -1128,8 +1131,8 @@ int dsi_pll_init(bool enable_hsclk, bool enable_hsdiv)
+ 		goto err1;
+ 	}
+ 
+-	/* ... but if left on, we get problems when planes do not
+-	 * fill the whole display. No idea about this XXX */
++	/* XXX ... but if left on, we get problems when planes do not
++	 * fill the whole display. No idea about this */
+ 	dispc_pck_free_enable(0);
+ 
+ 	if (enable_hsclk && enable_hsdiv)
+@@ -2214,6 +2217,7 @@ static int dsi_proto_config(struct omap_display *display)
+ {
+ 	u32 r;
+ 	int buswidth = 0;
++	int div;
+ 
+ 	dsi_config_tx_fifo(DSI_FIFO_SIZE_128,
+ 			DSI_FIFO_SIZE_0,
+@@ -2254,8 +2258,9 @@ static int dsi_proto_config(struct omap_display *display)
+ 	r = FLD_MOD(r, 1, 1, 1);	/* CS_RX_EN */
+ 	r = FLD_MOD(r, 1, 2, 2);	/* ECC_RX_EN */
+ 	r = FLD_MOD(r, 1, 3, 3);	/* TX_FIFO_ARBITRATION */
+-	/* XXX what should the ratio be */
+-	r = FLD_MOD(r, 0, 4, 4);	/* VP_CLK_RATIO, VP_PCLK = VP_CLK/2 */
++
++	div = dispc_lclk_rate() / dispc_pclk_rate();
++	r = FLD_MOD(r, div == 2 ? 0 : 1, 4, 4);	/* VP_CLK_RATIO */
+ 	r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */
+ 	r = FLD_MOD(r, 0, 8, 8);	/* VP_CLK_POL */
+ 	r = FLD_MOD(r, 2, 13, 12);	/* LINE_BUFFER, 2 lines */
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch b/recipes/linux/linux-omap-pm/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch
new file mode 100644
index 0000000000..bca449f169
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0016-DSS2-DSI-improve-packet-len-calculation.patch
@@ -0,0 +1,58 @@
+From 6b2c9d84c7accdfe1067fcdc8a00e50674aab4bb Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 2 Apr 2009 17:42:26 +0300
+Subject: [PATCH] DSS2: DSI: improve packet len calculation
+
+---
+ drivers/video/omap2/dss/dsi.c |   21 ++++++++++++++++-----
+ 1 files changed, 16 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
+index aecb89d..66ac6ea 100644
+--- a/drivers/video/omap2/dss/dsi.c
++++ b/drivers/video/omap2/dss/dsi.c
+@@ -2624,17 +2624,28 @@ static void dsi_update_screen_dispc(struct omap_display *display,
+ 		u16 x, u16 y, u16 w, u16 h)
+ {
+ 	int bytespp = 3;
++	int len;
+ 	int total_len;
+-	int line_packet_len;
++	int packet_payload;
++	int packet_len;
+ 	u32 l;
+ 
+ 	if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL)
+ 		DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n",
+ 				x, y, w, h);
+ 
+-	/* TODO: one packet could be longer, I think? Max is the line buffer */
+-	line_packet_len = w * bytespp + 1;	/* 1 byte for DCS cmd */
+-	total_len = line_packet_len * h;
++	len = w * h * bytespp;
++
++	/* XXX: one packet could be longer, I think? Line buffer is
++	 * 1024 x 24bits, but we have to put DCS cmd there also.
++	 * 1023 * 3 should work, but causes strange color effects. */
++	packet_payload = min(w, (u16)1020) * bytespp;
++
++	packet_len = packet_payload + 1;	/* 1 byte for DCS cmd */
++	total_len = (len / packet_payload) * packet_len;
++
++	if (len % packet_payload)
++		total_len += (len % packet_payload) + 1;
+ 
+ 	display->ctrl->setup_update(display, x, y, w, h);
+ 
+@@ -2646,7 +2657,7 @@ static void dsi_update_screen_dispc(struct omap_display *display,
+ 	l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */
+ 	dsi_write_reg(DSI_VC_TE(1), l);
+ 
+-	dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, line_packet_len, 0);
++	dsi_vc_write_long_header(1, DSI_DT_DCS_LONG_WRITE, packet_len, 0);
+ 
+ 	if (dsi.use_te)
+ 		l = FLD_MOD(l, 1, 30, 30); /* TE_EN */
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch b/recipes/linux/linux-omap-pm/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch
new file mode 100644
index 0000000000..5b68b57da9
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0017-DSS2-Disable-video-planes-on-sync-lost-error.patch
@@ -0,0 +1,103 @@
+From 85848d329ca3a2d6ee6841cdc11cc5951d187931 Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Fri, 3 Apr 2009 19:09:20 +0200
+Subject: [PATCH] DSS2: Disable video planes on sync lost error
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+When encountering the sync lost error disable the display and all video
+planes on the affected manager. Afterwards re-enable the display.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |   50 +++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 50 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 1bc23f7..41734f3 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -2518,29 +2518,79 @@ static void dispc_error_worker(struct work_struct *work)
+ 	}
+ 
+ 	if (errors & DISPC_IRQ_SYNC_LOST) {
++		struct omap_overlay_manager *manager = NULL;
++		bool enable = false;
++
+ 		DSSERR("SYNC_LOST, disabling LCD\n");
++
+ 		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+ 			struct omap_overlay_manager *mgr;
+ 			mgr = omap_dss_get_overlay_manager(i);
+ 
+ 			if (mgr->id == OMAP_DSS_CHANNEL_LCD) {
++				manager = mgr;
++				enable = mgr->display->state ==
++						OMAP_DSS_DISPLAY_ACTIVE;
+ 				mgr->display->disable(mgr->display);
+ 				break;
+ 			}
+ 		}
++
++		if (manager) {
++			for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++				struct omap_overlay *ovl;
++				ovl = omap_dss_get_overlay(i);
++
++				if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++					continue;
++
++				if (ovl->id != 0 && ovl->manager == manager)
++					dispc_enable_plane(ovl->id, 0);
++			}
++
++			dispc_go(manager->id);
++			mdelay(50);
++			if (enable)
++				manager->display->enable(manager->display);
++		}
+ 	}
+ 
+ 	if (errors & DISPC_IRQ_SYNC_LOST_DIGIT) {
++		struct omap_overlay_manager *manager = NULL;
++		bool enable = false;
++
+ 		DSSERR("SYNC_LOST_DIGIT, disabling TV\n");
++
+ 		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
+ 			struct omap_overlay_manager *mgr;
+ 			mgr = omap_dss_get_overlay_manager(i);
+ 
+ 			if (mgr->id == OMAP_DSS_CHANNEL_DIGIT) {
++				manager = mgr;
++				enable = mgr->display->state ==
++						OMAP_DSS_DISPLAY_ACTIVE;
+ 				mgr->display->disable(mgr->display);
+ 				break;
+ 			}
+ 		}
++
++		if (manager) {
++			for (i = 0; i < omap_dss_get_num_overlays(); ++i) {
++				struct omap_overlay *ovl;
++				ovl = omap_dss_get_overlay(i);
++
++				if (!(ovl->caps & OMAP_DSS_OVL_CAP_DISPC))
++					continue;
++
++				if (ovl->id != 0 && ovl->manager == manager)
++					dispc_enable_plane(ovl->id, 0);
++			}
++
++			dispc_go(manager->id);
++			mdelay(50);
++			if (enable)
++				manager->display->enable(manager->display);
++		}
+ 	}
+ 
+ 	if (errors & DISPC_IRQ_OCP_ERR) {
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch b/recipes/linux/linux-omap-pm/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch
new file mode 100644
index 0000000000..088135c0a8
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0018-DSS2-check-for-ovl-paddr-only-when-enabling.patch
@@ -0,0 +1,40 @@
+From 63e15ba8d5f95b13d3abf359da718537d769f112 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Tue, 7 Apr 2009 10:01:58 +0300
+Subject: [PATCH] DSS2: check for ovl paddr only when enabling
+
+It seems Xvideo uses SETUP_PLANE ioctl even when
+the fb memory has not been allocated. Sigh.
+---
+ drivers/video/omap2/dss/overlay.c |    8 +++++---
+ 1 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
+index 9209acf..c047206 100644
+--- a/drivers/video/omap2/dss/overlay.c
++++ b/drivers/video/omap2/dss/overlay.c
+@@ -281,6 +281,11 @@ int dss_check_overlay(struct omap_overlay *ovl, struct omap_display *display)
+ 
+ 	info = &ovl->info;
+ 
++	if (info->paddr == 0) {
++		DSSDBG("check_overlay failed: paddr 0\n");
++		return -EINVAL;
++	}
++
+ 	display->get_resolution(display, &dw, &dh);
+ 
+ 	DSSDBG("check_overlay %d: (%d,%d %dx%d -> %dx%d) disp (%dx%d)\n",
+@@ -331,9 +336,6 @@ static int dss_ovl_set_overlay_info(struct omap_overlay *ovl,
+ 	int r;
+ 	struct omap_overlay_info old_info;
+ 
+-	if (info->paddr == 0)
+-		return -EINVAL;
+-
+ 	old_info = ovl->info;
+ 	ovl->info = *info;
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch b/recipes/linux/linux-omap-pm/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch
new file mode 100644
index 0000000000..daa95ca50d
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0019-DSS2-Check-fclk-limits-when-configuring-video-plane.patch
@@ -0,0 +1,183 @@
+From 67f3fc050ab4e2006d5b7ec6ec341896627181ab Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Mon, 6 Apr 2009 17:32:04 +0200
+Subject: [PATCH] DSS2: Check fclk limits when configuring video planes
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+Check that the currect functional clock is fast enough to support
+the requested scaling ratios. Also check if 5-tap filtering can be
+used even though the downscaling ratio is less than 1:2 since the
+functional clock rate required for 5-tap filtering can be less than
+the requirement for 3-tap filtering, and 5-tap filtering should look
+better.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |  104 ++++++++++++++++++++++++++++++++++++---
+ 1 files changed, 97 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 41734f3..61861d8 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1026,11 +1026,11 @@ static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu)
+ static void _dispc_set_scaling(enum omap_plane plane,
+ 		u16 orig_width, u16 orig_height,
+ 		u16 out_width, u16 out_height,
+-		bool ilace)
++		bool ilace, bool five_taps)
+ {
+ 	int fir_hinc;
+ 	int fir_vinc;
+-	int hscaleup, vscaleup, five_taps;
++	int hscaleup, vscaleup;
+ 	int fieldmode = 0;
+ 	int accu0 = 0;
+ 	int accu1 = 0;
+@@ -1040,7 +1040,6 @@ static void _dispc_set_scaling(enum omap_plane plane,
+ 
+ 	hscaleup = orig_width <= out_width;
+ 	vscaleup = orig_height <= out_height;
+-	five_taps = orig_height > out_height * 2;
+ 
+ 	_dispc_set_scale_coef(plane, hscaleup, vscaleup, five_taps);
+ 
+@@ -1283,6 +1282,73 @@ static void calc_rotation_offset(u8 rotation, bool mirror,
+ 	}
+ }
+ 
++static unsigned long calc_fclk_five_taps(u16 width, u16 height,
++		u16 out_width, u16 out_height, enum omap_color_mode color_mode)
++{
++	u32 fclk = 0;
++	/* FIXME venc pclk? */
++	u64 tmp, pclk = dispc_pclk_rate();
++
++	if (height > out_height) {
++		/* FIXME get real display PPL */
++		unsigned int ppl = 800;
++
++		tmp = pclk * height * out_width;
++		do_div(tmp, 2 * out_height * ppl);
++		fclk = tmp;
++
++		if (height > 2 * out_height) {
++			tmp = pclk * (height - 2 * out_height) * out_width;
++			do_div(tmp, 2 * out_height * (ppl - out_width));
++			fclk = max(fclk, (u32) tmp);
++		}
++	}
++
++	if (width > out_width) {
++		tmp = pclk * width;
++		do_div(tmp, out_width);
++		fclk = max(fclk, (u32) tmp);
++
++		if (color_mode == OMAP_DSS_COLOR_RGB24U)
++			fclk <<= 1;
++	}
++
++	return fclk;
++}
++
++static unsigned long calc_fclk(u16 width, u16 height,
++		u16 out_width, u16 out_height,
++		enum omap_color_mode color_mode, bool five_taps)
++{
++	unsigned int hf, vf;
++
++	if (five_taps)
++		return calc_fclk_five_taps(width, height,
++				out_width, out_height, color_mode);
++
++	/*
++	 * FIXME how to determine the 'A' factor
++	 * for the no downscaling case ?
++	 */
++
++	if (width > 3 * out_width)
++		hf = 4;
++	else if (width > 2 * out_width)
++		hf = 3;
++	else if (width > out_width)
++		hf = 2;
++	else
++		hf = 1;
++
++	if (height > out_height)
++		vf = 2;
++	else
++		vf = 1;
++
++	/* FIXME venc pclk? */
++	return dispc_pclk_rate() * vf * hf;
++}
++
+ static int _dispc_setup_plane(enum omap_plane plane,
+ 		enum omap_channel channel_out,
+ 		u32 paddr, u16 screen_width,
+@@ -1294,7 +1360,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 		u8 rotation, int mirror)
+ {
+ 	const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
+-	bool five_taps = height > out_height * 2;
++	bool five_taps = 0;
+ 	bool fieldmode = 0;
+ 	int cconv = 0;
+ 	unsigned offset0, offset1;
+@@ -1323,8 +1389,8 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 		}
+ 	} else {
+ 		/* video plane */
+-		if (width > (2048 >> five_taps))
+-			return -EINVAL;
++
++		unsigned long fclk;
+ 
+ 		if (out_width < width / maxdownscale ||
+ 		   out_width > width * 8)
+@@ -1356,6 +1422,30 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 		default:
+ 			return -EINVAL;
+ 		}
++
++		/* Must use 5-tap filter? */
++		five_taps = height > out_height * 2;
++
++		/* Try to use 5-tap filter whenever possible. */
++		if (cpu_is_omap34xx() && !five_taps &&
++		    height > out_height && width <= 1024) {
++			fclk = calc_fclk_five_taps(width, height,
++					out_width, out_height, color_mode);
++			if (fclk <= dispc_fclk_rate())
++				five_taps = true;
++		}
++
++		if (width > (2048 >> five_taps))
++			return -EINVAL;
++
++		fclk = calc_fclk(width, height, out_width, out_height,
++				color_mode, five_taps);
++
++		DSSDBG("required fclk rate = %lu Hz\n", fclk);
++		DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
++
++		if (fclk > dispc_fclk_rate())
++			return -EINVAL;
+ 	}
+ 
+ 	if (ilace && height >= out_height)
+@@ -1399,7 +1489,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	if (plane != OMAP_DSS_GFX) {
+ 		_dispc_set_scaling(plane, width, height,
+ 				   out_width, out_height,
+-				   ilace);
++				   ilace, five_taps);
+ 		_dispc_set_vid_size(plane, out_width, out_height);
+ 		_dispc_set_vid_color_conv(plane, cconv);
+ 	}
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch b/recipes/linux/linux-omap-pm/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch
new file mode 100644
index 0000000000..b3248527e8
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0020-DSS2-Check-scaling-limits-against-proper-values.patch
@@ -0,0 +1,79 @@
+From 9f8f1613253656f155b3844c8255a560f86e0acd Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Mon, 6 Apr 2009 17:32:05 +0200
+Subject: [PATCH] DSS2: Check scaling limits against proper values
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+Move the ilace and fieldmode related height adjustments to be performed
+before checking the scaling limits.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |   31 ++++++++++++++++---------------
+ 1 files changed, 16 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 61861d8..ae7be3d 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1366,10 +1366,25 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	unsigned offset0, offset1;
+ 	s32 row_inc;
+ 	s32 pix_inc;
++	u16 frame_height = height;
+ 
+ 	if (paddr == 0)
+ 		return -EINVAL;
+ 
++	if (ilace && height >= out_height)
++		fieldmode = 1;
++
++	if (ilace) {
++		if (fieldmode)
++			height /= 2;
++		pos_y /= 2;
++		out_height /= 2;
++
++		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
++				"out_height %d\n",
++				height, pos_y, out_height);
++	}
++
+ 	if (plane == OMAP_DSS_GFX) {
+ 		if (width != out_width || height != out_height)
+ 			return -EINVAL;
+@@ -1448,28 +1463,14 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 			return -EINVAL;
+ 	}
+ 
+-	if (ilace && height >= out_height)
+-		fieldmode = 1;
+-
+ 	calc_rotation_offset(rotation, mirror,
+-			screen_width, width, height, color_mode,
++			screen_width, width, frame_height, color_mode,
+ 			fieldmode,
+ 			&offset0, &offset1, &row_inc, &pix_inc);
+ 
+ 	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
+ 			offset0, offset1, row_inc, pix_inc);
+ 
+-	if (ilace) {
+-		if (fieldmode)
+-			height /= 2;
+-		pos_y /= 2;
+-		out_height /= 2;
+-
+-		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
+-				"out_height %d\n",
+-				height, pos_y, out_height);
+-	}
+-
+ 	_dispc_set_channel_out(plane, channel_out);
+ 	_dispc_set_color_mode(plane, color_mode);
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0021-DSS2-Add-venc-register-dump.patch b/recipes/linux/linux-omap-pm/dss2/0021-DSS2-Add-venc-register-dump.patch
new file mode 100644
index 0000000000..31ff180228
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0021-DSS2-Add-venc-register-dump.patch
@@ -0,0 +1,96 @@
+From c5e71be877e71c7df329205307e830f158c403bf Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Mon, 6 Apr 2009 17:32:06 +0200
+Subject: [PATCH] DSS2: Add venc register dump
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+Add a new file to debugfs to dump the VENC registers. The function
+prototype was already there but the implementation was missing.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/venc.c |   55 ++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 55 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
+index aceed9f..b655df4 100644
+--- a/drivers/video/omap2/dss/venc.c
++++ b/drivers/video/omap2/dss/venc.c
+@@ -30,6 +30,7 @@
+ #include <linux/completion.h>
+ #include <linux/delay.h>
+ #include <linux/string.h>
++#include <linux/seq_file.h>
+ 
+ #include <mach/display.h>
+ #include <mach/cpu.h>
+@@ -81,6 +82,7 @@
+ #define VENC_TVDETGP_INT_START_STOP_Y		0xB4
+ #define VENC_GEN_CTRL				0xB8
+ #define VENC_OUTPUT_CONTROL			0xC4
++#define VENC_OUTPUT_TEST			0xC8
+ #define VENC_DAC_B__DAC_C			0xC8
+ 
+ struct venc_config {
+@@ -598,3 +600,56 @@ void venc_init_display(struct omap_display *display)
+ 	display->set_timings = venc_set_timings;
+ 	display->check_timings = venc_check_timings;
+ }
++
++void venc_dump_regs(struct seq_file *s)
++{
++#define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, venc_read_reg(r))
++
++	venc_enable_clocks(1);
++
++	DUMPREG(VENC_F_CONTROL);
++	DUMPREG(VENC_VIDOUT_CTRL);
++	DUMPREG(VENC_SYNC_CTRL);
++	DUMPREG(VENC_LLEN);
++	DUMPREG(VENC_FLENS);
++	DUMPREG(VENC_HFLTR_CTRL);
++	DUMPREG(VENC_CC_CARR_WSS_CARR);
++	DUMPREG(VENC_C_PHASE);
++	DUMPREG(VENC_GAIN_U);
++	DUMPREG(VENC_GAIN_V);
++	DUMPREG(VENC_GAIN_Y);
++	DUMPREG(VENC_BLACK_LEVEL);
++	DUMPREG(VENC_BLANK_LEVEL);
++	DUMPREG(VENC_X_COLOR);
++	DUMPREG(VENC_M_CONTROL);
++	DUMPREG(VENC_BSTAMP_WSS_DATA);
++	DUMPREG(VENC_S_CARR);
++	DUMPREG(VENC_LINE21);
++	DUMPREG(VENC_LN_SEL);
++	DUMPREG(VENC_L21__WC_CTL);
++	DUMPREG(VENC_HTRIGGER_VTRIGGER);
++	DUMPREG(VENC_SAVID__EAVID);
++	DUMPREG(VENC_FLEN__FAL);
++	DUMPREG(VENC_LAL__PHASE_RESET);
++	DUMPREG(VENC_HS_INT_START_STOP_X);
++	DUMPREG(VENC_HS_EXT_START_STOP_X);
++	DUMPREG(VENC_VS_INT_START_X);
++	DUMPREG(VENC_VS_INT_STOP_X__VS_INT_START_Y);
++	DUMPREG(VENC_VS_INT_STOP_Y__VS_EXT_START_X);
++	DUMPREG(VENC_VS_EXT_STOP_X__VS_EXT_START_Y);
++	DUMPREG(VENC_VS_EXT_STOP_Y);
++	DUMPREG(VENC_AVID_START_STOP_X);
++	DUMPREG(VENC_AVID_START_STOP_Y);
++	DUMPREG(VENC_FID_INT_START_X__FID_INT_START_Y);
++	DUMPREG(VENC_FID_INT_OFFSET_Y__FID_EXT_START_X);
++	DUMPREG(VENC_FID_EXT_START_Y__FID_EXT_OFFSET_Y);
++	DUMPREG(VENC_TVDETGP_INT_START_STOP_X);
++	DUMPREG(VENC_TVDETGP_INT_START_STOP_Y);
++	DUMPREG(VENC_GEN_CTRL);
++	DUMPREG(VENC_OUTPUT_CONTROL);
++	DUMPREG(VENC_OUTPUT_TEST);
++
++	venc_enable_clocks(0);
++
++#undef DUMPREG
++}
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0022-DSS2-FB-remove-unused-var-warning.patch b/recipes/linux/linux-omap-pm/dss2/0022-DSS2-FB-remove-unused-var-warning.patch
new file mode 100644
index 0000000000..d4fb327c76
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0022-DSS2-FB-remove-unused-var-warning.patch
@@ -0,0 +1,27 @@
+From facfd479bb6efad76eec1e74048cb7a31da7287d Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Mon, 6 Apr 2009 22:26:04 +0200
+Subject: [PATCH] DSS2: FB: remove unused var warning
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |    2 ++
+ 1 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index afe40a9..12ce0c3 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -1246,7 +1246,9 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
+ 		display->get_resolution(display, &w, &h);
+ 
+ 		if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++#ifdef DEBUG
+ 			int oldw = w, oldh = h;
++#endif
+ 
+ 			omap_vrfb_adjust_size(&w, &h, bytespp);
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch b/recipes/linux/linux-omap-pm/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch
new file mode 100644
index 0000000000..6492905530
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0023-DSS2-pass-the-default-FB-color-format-through-board.patch
@@ -0,0 +1,214 @@
+From c02b843c2732bc7b15a3e35b5dd715d68225bbd1 Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Wed, 8 Apr 2009 12:51:46 +0200
+Subject: [PATCH] DSS2: pass the default FB color format through board info
+
+Add a field to the FB memory region platform data, so that board
+init code can pass a default color format to the driver. Set this
+format as an initial setting for the given FB.
+
+This is needed for an upcoming patch that adds detection of the
+color format set by the bootloader.
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |  121 +++++++++++++++++++++++++++---
+ drivers/video/omap2/omapfb/omapfb.h      |    2 +
+ include/linux/omapfb.h                   |    5 +
+ 3 files changed, 117 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 12ce0c3..67c67c2 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -370,6 +370,21 @@ static enum omap_color_mode fb_mode_to_dss_mode(struct fb_var_screeninfo *var)
+ 	return -EINVAL;
+ }
+ 
++static int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
++			       struct fb_var_screeninfo *var)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(omapfb_colormodes); ++i) {
++		struct omapfb_colormode *mode = &omapfb_colormodes[i];
++		if (dssmode == mode->dssmode) {
++			assign_colormode_to_var(var, mode);
++			return 0;
++		}
++	}
++	return -ENOENT;
++}
++
+ void set_fb_fix(struct fb_info *fbi)
+ {
+ 	struct fb_fix_screeninfo *fix = &fbi->fix;
+@@ -1267,6 +1282,60 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
+ 	return omapfb_alloc_fbmem(fbi, size, paddr);
+ }
+ 
++static enum omap_color_mode fb_format_to_dss_mode(enum omapfb_color_format format)
++{
++	enum omap_color_mode mode;
++
++	switch (format) {
++	case OMAPFB_COLOR_RGB565:
++		mode = OMAP_DSS_COLOR_RGB16;
++		break;
++	case OMAPFB_COLOR_YUV422:
++		mode = OMAP_DSS_COLOR_YUV2;
++		break;
++	case OMAPFB_COLOR_CLUT_8BPP:
++		mode = OMAP_DSS_COLOR_CLUT8;
++		break;
++	case OMAPFB_COLOR_CLUT_4BPP:
++		mode = OMAP_DSS_COLOR_CLUT4;
++		break;
++	case OMAPFB_COLOR_CLUT_2BPP:
++		mode = OMAP_DSS_COLOR_CLUT2;
++		break;
++	case OMAPFB_COLOR_CLUT_1BPP:
++		mode = OMAP_DSS_COLOR_CLUT1;
++		break;
++	case OMAPFB_COLOR_RGB444:
++		mode = OMAP_DSS_COLOR_RGB12U;
++		break;
++	case OMAPFB_COLOR_YUY422:
++		mode = OMAP_DSS_COLOR_UYVY;
++		break;
++	case OMAPFB_COLOR_ARGB16:
++		mode = OMAP_DSS_COLOR_ARGB16;
++		break;
++	case OMAPFB_COLOR_RGB24U:
++		mode = OMAP_DSS_COLOR_RGB24U;
++		break;
++	case OMAPFB_COLOR_RGB24P:
++		mode = OMAP_DSS_COLOR_RGB24P;
++		break;
++	case OMAPFB_COLOR_ARGB32:
++		mode = OMAP_DSS_COLOR_ARGB32;
++		break;
++	case OMAPFB_COLOR_RGBA32:
++		mode = OMAP_DSS_COLOR_RGBA32;
++		break;
++	case OMAPFB_COLOR_RGBX32:
++		mode = OMAP_DSS_COLOR_RGBX32;
++		break;
++	default:
++		mode = -EINVAL;
++	}
++
++	return mode;
++}
++
+ static int omapfb_parse_vram_param(const char *param, int max_entries,
+ 		unsigned long *sizes, unsigned long *paddrs)
+ {
+@@ -1483,9 +1552,36 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
+ 	}
+ 
+ 	var->nonstd = 0;
++	var->bits_per_pixel = 0;
+ 
+ 	var->rotate = ofbi->rotation;
+ 
++	/*
++	 * Check if there is a default color format set in the board file,
++	 * and use this format instead the default deducted from the
++	 * display bpp.
++	 */
++	if (fbdev->dev->platform_data) {
++		struct omapfb_platform_data *opd;
++		int id = ofbi->id;
++
++		opd = fbdev->dev->platform_data;
++		if (opd->mem_desc.region[id].format_used) {
++			enum omap_color_mode mode;
++			enum omapfb_color_format format;
++
++			format = opd->mem_desc.region[id].format;
++			mode = fb_format_to_dss_mode(format);
++			if (mode < 0) {
++				r = mode;
++				goto err;
++			}
++			r = dss_mode_to_fb_mode(mode, var);
++			if (r < 0)
++				goto err;
++		}
++	}
++
+ 	if (display) {
+ 		u16 w, h;
+ 		display->get_resolution(display, &w, &h);
+@@ -1502,16 +1598,18 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
+ 		var->xres_virtual = var->xres;
+ 		var->yres_virtual = var->yres;
+ 
+-		switch (display->get_recommended_bpp(display)) {
+-		case 16:
+-			var->bits_per_pixel = 16;
+-			break;
+-		case 24:
+-			var->bits_per_pixel = 32;
+-			break;
+-		default:
+-			dev_err(fbdev->dev, "illegal display bpp\n");
+-			return -EINVAL;
++		if (!var->bits_per_pixel) {
++			switch (display->get_recommended_bpp(display)) {
++				case 16:
++					var->bits_per_pixel = 16;
++					break;
++				case 24:
++					var->bits_per_pixel = 32;
++					break;
++				default:
++					dev_err(fbdev->dev, "illegal display bpp\n");
++					return -EINVAL;
++			}
+ 		}
+ 	} else {
+ 		/* if there's no display, let's just guess some basic values */
+@@ -1519,7 +1617,8 @@ int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
+ 		var->yres = 240;
+ 		var->xres_virtual = var->xres;
+ 		var->yres_virtual = var->yres;
+-		var->bits_per_pixel = 16;
++		if (!var->bits_per_pixel)
++			var->bits_per_pixel = 16;
+ 	}
+ 
+ 	r = check_fb_var(fbi, var);
+diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
+index 65e9e6e..2607def 100644
+--- a/drivers/video/omap2/omapfb/omapfb.h
++++ b/drivers/video/omap2/omapfb/omapfb.h
+@@ -27,6 +27,8 @@
+ #define DEBUG
+ #endif
+ 
++#include <mach/display.h>
++
+ #ifdef DEBUG
+ extern unsigned int omapfb_debug;
+ #define DBG(format, ...) \
+diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h
+index 96190b2..7a34f22 100644
+--- a/include/linux/omapfb.h
++++ b/include/linux/omapfb.h
+@@ -298,6 +298,11 @@ struct omapfb_mem_region {
+ 	void __iomem	*vaddr;
+ 	unsigned long	size;
+ 	u8		type;		/* OMAPFB_PLANE_MEM_* */
++	enum omapfb_color_format format;/* OMAPFB_COLOR_* */
++	unsigned	format_used:1;	/* Must be set when format is set.
++					 * Needed b/c of the badly chosen 0
++					 * base for OMAPFB_COLOR_* values
++					 */
+ 	unsigned	alloc:1;	/* allocated by the driver */
+ 	unsigned	map:1;		/* kernel mapped by the driver */
+ };
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch b/recipes/linux/linux-omap-pm/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch
new file mode 100644
index 0000000000..559e49f40a
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0024-DSS2-Beagle-Use-gpio_set_value.patch
@@ -0,0 +1,48 @@
+From 2710416c43572652cb5355a5eaf68038c95659e8 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 9 Apr 2009 12:10:46 +0300
+Subject: [PATCH] DSS2: Beagle: Use gpio_set_value
+
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   10 +++++++---
+ 1 files changed, 7 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index b67e7a5..8c1961d 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -372,7 +372,7 @@ static struct platform_device keys_gpio = {
+ static int beagle_enable_dvi(struct omap_display *display)
+ {
+ 	if (display->hw_config.panel_reset_gpio != -1)
+-		gpio_direction_output(display->hw_config.panel_reset_gpio, 1);
++		gpio_set_value(display->hw_config.panel_reset_gpio, 1);
+ 
+ 	return 0;
+ }
+@@ -380,7 +380,7 @@ static int beagle_enable_dvi(struct omap_display *display)
+ static void beagle_disable_dvi(struct omap_display *display)
+ {
+ 	if (display->hw_config.panel_reset_gpio != -1)
+-		gpio_direction_output(display->hw_config.panel_reset_gpio, 0);
++		gpio_set_value(display->hw_config.panel_reset_gpio, 0);
+ }
+ 
+ static struct omap_dss_display_config beagle_display_data_dvi = {
+@@ -445,8 +445,12 @@ static void __init beagle_display_init(void)
+ 	int r;
+ 
+ 	r = gpio_request(beagle_display_data_dvi.panel_reset_gpio, "DVI reset");
+-	if (r < 0)
++	if (r < 0) {
+ 		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
++		return;
++	}
++
++	gpio_direction_output(beagle_display_data_dvi.panel_reset_gpio, 0);
+ }
+ 
+ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch b/recipes/linux/linux-omap-pm/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch
new file mode 100644
index 0000000000..e81b1331bb
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0025-DSS2-VRFB-Macro-for-calculating-base-address-of-th.patch
@@ -0,0 +1,28 @@
+From 990f3160d33361c135ee72e91f202e05a8c378fc Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Mon, 13 Apr 2009 18:50:24 +0530
+Subject: [PATCH] DSS2: VRFB: Macro for calculating base address of the VRFB context was faulty
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ arch/arm/plat-omap/vrfb.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c
+index 7e0f8fc..d68065f 100644
+--- a/arch/arm/plat-omap/vrfb.c
++++ b/arch/arm/plat-omap/vrfb.c
+@@ -16,8 +16,8 @@
+ 
+ #define SMS_ROT_VIRT_BASE(context, rot) \
+ 	(((context >= 4) ? 0xD0000000 : 0x70000000) \
+-	 | 0x4000000 * (context) \
+-	 | 0x1000000 * (rot))
++	 + (0x4000000 * (context)) \
++	 + (0x1000000 * (rot)))
+ 
+ #define OMAP_VRFB_SIZE			(2048 * 2048 * 4)
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch b/recipes/linux/linux-omap-pm/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch
new file mode 100644
index 0000000000..6ee3908d10
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0026-DSS2-DSI-sidlemode-to-noidle-while-sending-frame.patch
@@ -0,0 +1,78 @@
+From a1e8018c0806a1a0579eda4b93b7d6764a2ff643 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 15 Apr 2009 14:06:54 +0300
+Subject: [PATCH] DSS2: DSI: sidlemode to noidle while sending frame
+
+DISPC interrupts are not wake-up capable. Smart-idle in DISPC_SIDLEMODE
+causes DSS interface to go to idle at the end of the frame, and the
+FRAMEDONE interrupt is then delayed until something wakes up the DSS
+interface.
+
+So we set SIDLEMODE to no-idle when we start sending the frame, and
+set it back to smart-idle after receiving FRAMEDONE.
+---
+ drivers/video/omap2/dss/dispc.c |   10 ++++++++++
+ drivers/video/omap2/dss/dsi.c   |    4 ++++
+ drivers/video/omap2/dss/dss.h   |    3 +++
+ 3 files changed, 17 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index ae7be3d..16c68b8 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -2791,6 +2791,16 @@ static void _omap_dispc_initialize_irq(void)
+ 	omap_dispc_set_irqs();
+ }
+ 
++void dispc_enable_sidle(void)
++{
++	REG_FLD_MOD(DISPC_SYSCONFIG, 2, 4, 3);	/* SIDLEMODE: smart idle */
++}
++
++void dispc_disable_sidle(void)
++{
++	REG_FLD_MOD(DISPC_SYSCONFIG, 1, 4, 3);	/* SIDLEMODE: no idle */
++}
++
+ static void _omap_dispc_initial_config(void)
+ {
+ 	u32 l;
+diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
+index 66ac6ea..50af925 100644
+--- a/drivers/video/omap2/dss/dsi.c
++++ b/drivers/video/omap2/dss/dsi.c
+@@ -2665,6 +2665,8 @@ static void dsi_update_screen_dispc(struct omap_display *display,
+ 		l = FLD_MOD(l, 1, 31, 31); /* TE_START */
+ 	dsi_write_reg(DSI_VC_TE(1), l);
+ 
++	dispc_disable_sidle();
++
+ 	dispc_enable_lcd_out(1);
+ 
+ 	if (dsi.use_te)
+@@ -2678,6 +2680,8 @@ static void framedone_callback(void *data, u32 mask)
+ 		return;
+ 	}
+ 
++	dispc_enable_sidle();
++
+ 	dsi.framedone_scheduled = 1;
+ 
+ 	/* We get FRAMEDONE when DISPC has finished sending pixels and turns
+diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
+index 0be42b6..d0917a8 100644
+--- a/drivers/video/omap2/dss/dss.h
++++ b/drivers/video/omap2/dss/dss.h
+@@ -244,6 +244,9 @@ void dispc_fake_vsync_irq(void);
+ void dispc_save_context(void);
+ void dispc_restore_context(void);
+ 
++void dispc_enable_sidle(void);
++void dispc_disable_sidle(void);
++
+ void dispc_lcd_enable_signal_polarity(bool act_high);
+ void dispc_lcd_enable_signal(bool enable);
+ void dispc_pck_free_enable(bool enable);
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch b/recipes/linux/linux-omap-pm/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch
new file mode 100644
index 0000000000..b56e32a11c
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0027-DSS2-VRFB-rotation-and-mirroring-implemented.patch
@@ -0,0 +1,324 @@
+From 77e848eeba461e9b55b09d39fd0d640caea13e19 Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Thu, 9 Apr 2009 12:09:44 +0530
+Subject: [PATCH] DSS2: VRFB rotation and mirroring implemented.
+
+DSS2 modified to accept the rotation_type input
+to get the dma or VRFB rotation.
+
+DSS2: VRFB: Changed to pass DSS mode to vrfb_setup instead of Bpp.
+
+VRFB size registers requires the width to be halved when the
+mode is YUV or UYVY.  So modifed to pass the mode to omap_vrfb_setup
+function.
+
+Code added by Tim Yamin for few bug fixes
+
+Signed-off-by: Tim Yamin <plasm@roo.me.uk>
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ arch/arm/plat-omap/include/mach/display.h |    6 ++
+ arch/arm/plat-omap/include/mach/vrfb.h    |    3 +-
+ arch/arm/plat-omap/vrfb.c                 |   36 +++++++++-
+ drivers/video/omap2/dss/dispc.c           |  109 +++++++++++++++++++++++++++--
+ drivers/video/omap2/dss/dss.h             |    1 +
+ drivers/video/omap2/dss/manager.c         |    1 +
+ 6 files changed, 144 insertions(+), 12 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+index 6b702c7..b0a6272 100644
+--- a/arch/arm/plat-omap/include/mach/display.h
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -341,6 +341,11 @@ enum omap_dss_overlay_managers {
+ 
+ struct omap_overlay_manager;
+ 
++enum omap_dss_rotation_type {
++	OMAP_DSS_ROT_DMA = 0,
++	OMAP_DSS_ROT_VRFB = 1,
++};
++
+ struct omap_overlay_info {
+ 	bool enabled;
+ 
+@@ -351,6 +356,7 @@ struct omap_overlay_info {
+ 	u16 height;
+ 	enum omap_color_mode color_mode;
+ 	u8 rotation;
++	enum omap_dss_rotation_type rotation_type;
+ 	bool mirror;
+ 
+ 	u16 pos_x;
+diff --git a/arch/arm/plat-omap/include/mach/vrfb.h b/arch/arm/plat-omap/include/mach/vrfb.h
+index 2047862..12c7fab 100644
+--- a/arch/arm/plat-omap/include/mach/vrfb.h
++++ b/arch/arm/plat-omap/include/mach/vrfb.h
+@@ -24,6 +24,7 @@
+ #ifndef __VRFB_H
+ #define __VRFB_H
+ 
++#include <mach/display.h>
+ #define OMAP_VRFB_LINE_LEN 2048
+ 
+ struct vrfb
+@@ -42,6 +43,6 @@ extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+ 		u8 bytespp);
+ extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+ 		u16 width, u16 height,
+-		u8 bytespp);
++		enum omap_color_mode color_mode);
+ 
+ #endif /* __VRFB_H */
+diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c
+index d68065f..2f08f6d 100644
+--- a/arch/arm/plat-omap/vrfb.c
++++ b/arch/arm/plat-omap/vrfb.c
+@@ -5,7 +5,6 @@
+ 
+ #include <mach/io.h>
+ #include <mach/vrfb.h>
+-
+ /*#define DEBUG*/
+ 
+ #ifdef DEBUG
+@@ -50,19 +49,48 @@ EXPORT_SYMBOL(omap_vrfb_adjust_size);
+ 
+ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+ 		u16 width, u16 height,
+-		u8 bytespp)
++		enum omap_color_mode color_mode)
+ {
+ 	unsigned pixel_size_exp;
+ 	u16 vrfb_width;
+ 	u16 vrfb_height;
+ 	u8 ctx = vrfb->context;
++	u8 bytespp;
+ 
+ 	DBG("omapfb_set_vrfb(%d, %lx, %dx%d, %d)\n", ctx, paddr,
+ 			width, height, bytespp);
+ 
+-	if (bytespp == 4)
++	switch (color_mode) {
++	case OMAP_DSS_COLOR_RGB16:
++	case OMAP_DSS_COLOR_ARGB16:
++		bytespp = 2;
++		break;
++
++	case OMAP_DSS_COLOR_RGB24P:
++		bytespp = 3;
++		break;
++
++	case OMAP_DSS_COLOR_RGB24U:
++	case OMAP_DSS_COLOR_ARGB32:
++	case OMAP_DSS_COLOR_RGBA32:
++	case OMAP_DSS_COLOR_RGBX32:
++	case OMAP_DSS_COLOR_YUV2:
++	case OMAP_DSS_COLOR_UYVY:
++		bytespp = 4;
++		break;
++
++	default:
++		BUG();
++		return;
++	}
++
++	if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++			color_mode == OMAP_DSS_COLOR_UYVY)
++		width >>= 1;
++
++	if (bytespp == 4) {
+ 		pixel_size_exp = 2;
+-	else if (bytespp == 2)
++	} else if (bytespp == 2)
+ 		pixel_size_exp = 1;
+ 	else
+ 		BUG();
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 16c68b8..23a8155 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1106,7 +1106,7 @@ static void _dispc_set_rotation_attrs(enum omap_plane plane, u8 rotation,
+ 			case 0: vidrot = 0; break;
+ 			case 1: vidrot = 1; break;
+ 			case 2: vidrot = 2; break;
+-			case 3: vidrot = 1; break;
++			case 3: vidrot = 3; break;
+ 			}
+ 		}
+ 
+@@ -1134,7 +1134,92 @@ static s32 pixinc(int pixels, u8 ps)
+ 		BUG();
+ }
+ 
+-static void calc_rotation_offset(u8 rotation, bool mirror,
++static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
++		u16 screen_width,
++		u16 width, u16 height,
++		enum omap_color_mode color_mode, bool fieldmode,
++		unsigned *offset0, unsigned *offset1,
++		s32 *row_inc, s32 *pix_inc)
++{
++	u8 ps;
++
++	switch (color_mode) {
++	case OMAP_DSS_COLOR_RGB16:
++	case OMAP_DSS_COLOR_ARGB16:
++		ps = 2;
++		break;
++
++	case OMAP_DSS_COLOR_RGB24P:
++		ps = 3;
++		break;
++
++	case OMAP_DSS_COLOR_RGB24U:
++	case OMAP_DSS_COLOR_ARGB32:
++	case OMAP_DSS_COLOR_RGBA32:
++	case OMAP_DSS_COLOR_RGBX32:
++	case OMAP_DSS_COLOR_YUV2:
++	case OMAP_DSS_COLOR_UYVY:
++		ps = 4;
++		break;
++
++	default:
++		BUG();
++		return;
++	}
++
++	DSSDBG("calc_rot(%d): scrw %d, %dx%d\n", rotation, screen_width,
++			width, height);
++	switch (rotation + mirror * 4) {
++	case 0:
++	case 2:
++		/*
++		 * If the pixel format is YUV or UYVY divide the width
++		 * of the image by 2 for 0 and 180 degree rotation.
++		 */
++		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++			color_mode == OMAP_DSS_COLOR_UYVY)
++			width = width >> 1;
++	case 1:
++	case 3:
++		*offset0 = 0;
++		if (fieldmode)
++			*offset1 = screen_width * ps;
++		else
++			*offset1 = 0;
++
++		*row_inc = pixinc(1 + (screen_width - width) +
++				(fieldmode ? screen_width : 0),
++				ps);
++		*pix_inc = pixinc(1, ps);
++		break;
++
++	case 4:
++	case 6:
++		/* If the pixel format is YUV or UYVY divide the width
++		 * of the image by 2  for 0 degree and 180 degree
++		 */
++		if (color_mode == OMAP_DSS_COLOR_YUV2 ||
++			color_mode == OMAP_DSS_COLOR_UYVY)
++			width = width >> 1;
++	case 5:
++	case 7:
++		*offset0 = 0;
++		if (fieldmode)
++			*offset1 = screen_width * ps;
++		else
++			*offset1 = 0;
++		*row_inc = pixinc(1 - (screen_width + width) -
++				(fieldmode ? screen_width : 0),
++				ps);
++		*pix_inc = pixinc(1, ps);
++		break;
++
++	default:
++		BUG();
++	}
++}
++
++static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 		u16 screen_width,
+ 		u16 width, u16 height,
+ 		enum omap_color_mode color_mode, bool fieldmode,
+@@ -1357,6 +1442,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 		u16 out_width, u16 out_height,
+ 		enum omap_color_mode color_mode,
+ 		bool ilace,
++		enum omap_dss_rotation_type rotation_type,
+ 		u8 rotation, int mirror)
+ {
+ 	const int maxdownscale = cpu_is_omap34xx() ? 4 : 2;
+@@ -1463,10 +1549,16 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 			return -EINVAL;
+ 	}
+ 
+-	calc_rotation_offset(rotation, mirror,
+-			screen_width, width, frame_height, color_mode,
+-			fieldmode,
+-			&offset0, &offset1, &row_inc, &pix_inc);
++	if (rotation_type == OMAP_DSS_ROT_DMA)
++		calc_dma_rotation_offset(rotation, mirror,
++				screen_width, width, frame_height, color_mode,
++				fieldmode,
++				&offset0, &offset1, &row_inc, &pix_inc);
++	else
++		calc_vrfb_rotation_offset(rotation, mirror,
++				screen_width, width, frame_height, color_mode,
++				fieldmode,
++				&offset0, &offset1, &row_inc, &pix_inc);
+ 
+ 	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
+ 			offset0, offset1, row_inc, pix_inc);
+@@ -2889,6 +2981,7 @@ int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out,
+ 		       u16 out_width, u16 out_height,
+ 		       enum omap_color_mode color_mode,
+ 		       bool ilace,
++		       enum omap_dss_rotation_type rotation_type,
+ 		       u8 rotation, bool mirror)
+ {
+ 	int r = 0;
+@@ -2909,6 +3002,7 @@ int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out,
+ 			   width, height,
+ 			   out_width, out_height,
+ 			   color_mode, ilace,
++			   rotation_type,
+ 			   rotation, mirror);
+ 
+ 	enable_clocks(0);
+@@ -3122,7 +3216,8 @@ void dispc_setup_partial_planes(struct omap_display *display,
+ 				pw, ph,
+ 				pow, poh,
+ 				pi->color_mode, 0,
+-				pi->rotation, // XXX rotation probably wrong
++				pi->rotation_type,
++				pi->rotation,
+ 				pi->mirror);
+ 
+ 		dispc_enable_plane(ovl->id, 1);
+diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
+index d0917a8..584dce6 100644
+--- a/drivers/video/omap2/dss/dss.h
++++ b/drivers/video/omap2/dss/dss.h
+@@ -272,6 +272,7 @@ int dispc_setup_plane(enum omap_plane plane, enum omap_channel channel_out,
+ 		      u16 out_width, u16 out_height,
+ 		      enum omap_color_mode color_mode,
+ 		      bool ilace,
++		      enum omap_dss_rotation_type rotation_type,
+ 		      u8 rotation, bool mirror);
+ 
+ void dispc_go(enum omap_channel channel);
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index b0fee80..8ca0bbb 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -395,6 +395,7 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
+ 				outh,
+ 				ovl->info.color_mode,
+ 				ilace,
++				ovl->info.rotation_type,
+ 				ovl->info.rotation,
+ 				ovl->info.mirror);
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch b/recipes/linux/linux-omap-pm/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch
new file mode 100644
index 0000000000..6400da3c24
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0028-DSS2-OMAPFB-Added-support-for-the-YUV-VRFB-rotatio.patch
@@ -0,0 +1,236 @@
+From c09f1a0642fd58a1b081594ea36dfd1bf71aec52 Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Thu, 9 Apr 2009 12:13:07 +0530
+Subject: [PATCH] DSS2: OMAPFB: Added support for the YUV VRFB rotation and mirroring.
+
+DSS2 now requires roatation_type to be specified by driver.
+Added support for that.
+DSS2 OMAPFB: Modified to pass the dss mode to omap_vrfb_setup function.
+
+VRFB size register requires the width to be halved when the
+mode is YUV or UYVY.  So VRFB is modifed to pass the mode to omap_vrfb_setup
+function.
+
+Few changes done by Tim Yamin
+Signed-off-by: Tim Yamin <plasm@roo.me.uk>
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ arch/arm/plat-omap/vrfb.c                |    4 +-
+ drivers/video/omap2/omapfb/omapfb-main.c |   59 ++++++++++++++----------------
+ drivers/video/omap2/omapfb/omapfb.h      |    7 +---
+ 3 files changed, 30 insertions(+), 40 deletions(-)
+
+diff --git a/arch/arm/plat-omap/vrfb.c b/arch/arm/plat-omap/vrfb.c
+index 2f08f6d..2ae0d68 100644
+--- a/arch/arm/plat-omap/vrfb.c
++++ b/arch/arm/plat-omap/vrfb.c
+@@ -88,9 +88,9 @@ void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+ 			color_mode == OMAP_DSS_COLOR_UYVY)
+ 		width >>= 1;
+ 
+-	if (bytespp == 4) {
++	if (bytespp == 4)
+ 		pixel_size_exp = 2;
+-	} else if (bytespp == 2)
++	else if (bytespp == 2)
+ 		pixel_size_exp = 1;
+ 	else
+ 		BUG();
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 67c67c2..57f5900 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -176,15 +176,9 @@ static unsigned omapfb_get_vrfb_offset(struct omapfb_info *ofbi, int rot)
+ 
+ static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi)
+ {
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
+-		unsigned offset;
+-		int rot;
+-
+-		rot = ofbi->rotation;
+-
+-		offset = omapfb_get_vrfb_offset(ofbi, rot);
+-
+-		return ofbi->region.vrfb.paddr[rot] + offset;
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++		return ofbi->region.vrfb.paddr[ofbi->rotation]
++			+ omapfb_get_vrfb_offset(ofbi, ofbi->rotation);
+ 	} else {
+ 		return ofbi->region.paddr;
+ 	}
+@@ -192,7 +186,7 @@ static u32 omapfb_get_region_rot_paddr(struct omapfb_info *ofbi)
+ 
+ u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
+ {
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ 		return ofbi->region.vrfb.paddr[0];
+ 	else
+ 		return ofbi->region.paddr;
+@@ -200,7 +194,7 @@ u32 omapfb_get_region_paddr(struct omapfb_info *ofbi)
+ 
+ void __iomem *omapfb_get_region_vaddr(struct omapfb_info *ofbi)
+ {
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ 		return ofbi->region.vrfb.vaddr[0];
+ 	else
+ 		return ofbi->region.vaddr;
+@@ -398,7 +392,7 @@ void set_fb_fix(struct fb_info *fbi)
+ 	fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi);
+ 
+ 	/* used by mmap in fbmem.c */
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ 		fix->line_length =
+ 			(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3;
+ 	else
+@@ -434,11 +428,14 @@ void set_fb_fix(struct fb_info *fbi)
+ 	fix->xpanstep = 1;
+ 	fix->ypanstep = 1;
+ 
+-	if (rg->size) {
+-		if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
+-			omap_vrfb_setup(&rg->vrfb, rg->paddr,
+-					var->xres_virtual, var->yres_virtual,
+-					var->bits_per_pixel >> 3);
++	if (rg->size && ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++		enum omap_color_mode mode = 0;
++		mode = fb_mode_to_dss_mode(var);
++
++		omap_vrfb_setup(&rg->vrfb, rg->paddr,
++				var->xres_virtual,
++				var->yres_virtual,
++				mode);
+ 	}
+ }
+ 
+@@ -527,7 +524,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
+ 	if (var->yres > var->yres_virtual)
+ 		var->yres = var->yres_virtual;
+ 
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ 		line_size = OMAP_VRFB_LINE_LEN * bytespp;
+ 	else
+ 		line_size = var->xres_virtual * bytespp;
+@@ -549,7 +546,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
+ 
+ 	if (line_size * var->yres_virtual > max_frame_size) {
+ 		DBG("can't fit FB into memory, reducing x\n");
+-		if (ofbi->rotation_type == OMAPFB_ROT_VRFB)
++		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ 			return -EINVAL;
+ 
+ 		var->xres_virtual = max_frame_size / var->yres_virtual /
+@@ -672,7 +669,7 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+ 	struct omap_overlay_info info;
+ 	int xres, yres;
+ 	int screen_width;
+-	int rot, mirror;
++	int mirror;
+ 
+ 	DBG("setup_overlay %d, posx %d, posy %d, outw %d, outh %d\n", ofbi->id,
+ 			posx, posy, outw, outh);
+@@ -688,7 +685,7 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+ 	offset = ((var->yoffset * var->xres_virtual +
+ 				var->xoffset) * var->bits_per_pixel) >> 3;
+ 
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+ 		data_start_p = omapfb_get_region_rot_paddr(ofbi);
+ 		data_start_v = NULL;
+ 	} else {
+@@ -711,13 +708,10 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+ 
+ 	ovl->get_overlay_info(ovl, &info);
+ 
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
+-		rot = 0;
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ 		mirror = 0;
+-	} else {
+-		rot = ofbi->rotation;
++	else
+ 		mirror = ofbi->mirror;
+-	}
+ 
+ 	info.paddr = data_start_p;
+ 	info.vaddr = data_start_v;
+@@ -725,7 +719,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+ 	info.width = xres;
+ 	info.height = yres;
+ 	info.color_mode = mode;
+-	info.rotation = rot;
++	info.rotation_type = ofbi->rotation_type;
++	info.rotation = ofbi->rotation;
+ 	info.mirror = mirror;
+ 
+ 	info.pos_x = posx;
+@@ -1121,7 +1116,7 @@ static void omapfb_free_fbmem(struct fb_info *fbi)
+ 	if (rg->vaddr)
+ 		iounmap(rg->vaddr);
+ 
+-	if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+ 		/* unmap the 0 angle rotation */
+ 		if (rg->vrfb.vaddr[0]) {
+ 			iounmap(rg->vrfb.vaddr[0]);
+@@ -1181,7 +1176,7 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+ 		return -ENOMEM;
+ 	}
+ 
+-	if (ofbi->rotation_type != OMAPFB_ROT_VRFB) {
++	if (ofbi->rotation_type != OMAP_DSS_ROT_VRFB) {
+ 		vaddr = ioremap_wc(paddr, size);
+ 
+ 		if (!vaddr) {
+@@ -1260,7 +1255,7 @@ static int omapfb_alloc_fbmem_display(struct fb_info *fbi, unsigned long size,
+ 
+ 		display->get_resolution(display, &w, &h);
+ 
+-		if (ofbi->rotation_type == OMAPFB_ROT_VRFB) {
++		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+ #ifdef DEBUG
+ 			int oldw = w, oldh = h;
+ #endif
+@@ -1701,8 +1696,8 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
+ 		ofbi->id = i;
+ 
+ 		/* assign these early, so that fb alloc can use them */
+-		ofbi->rotation_type = def_vrfb ? OMAPFB_ROT_VRFB :
+-			OMAPFB_ROT_DMA;
++		ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB :
++			OMAP_DSS_ROT_DMA;
+ 		ofbi->rotation = def_rotate;
+ 		ofbi->mirror = def_mirror;
+ 
+diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
+index 2607def..43f6922 100644
+--- a/drivers/video/omap2/omapfb/omapfb.h
++++ b/drivers/video/omap2/omapfb/omapfb.h
+@@ -53,11 +53,6 @@ struct omapfb2_mem_region {
+ 	bool		map;		/* kernel mapped by the driver */
+ };
+ 
+-enum omapfb_rotation_type {
+-	OMAPFB_ROT_DMA = 0,
+-	OMAPFB_ROT_VRFB = 1,
+-};
+-
+ /* appended to fb_info */
+ struct omapfb_info {
+ 	int id;
+@@ -66,7 +61,7 @@ struct omapfb_info {
+ 	int num_overlays;
+ 	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
+ 	struct omapfb2_device *fbdev;
+-	enum omapfb_rotation_type rotation_type;
++	enum omap_dss_rotation_type rotation_type;
+ 	u8 rotation;
+ 	bool mirror;
+ };
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch b/recipes/linux/linux-omap-pm/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch
new file mode 100644
index 0000000000..072978670b
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0029-DSS2-OMAPFB-Set-line_length-correctly-for-YUV-with.patch
@@ -0,0 +1,61 @@
+From a8a37babe4856170f4cba86c425a8f21975d9e9e Mon Sep 17 00:00:00 2001
+From: Tim Yamin <plasm@roo.me.uk>
+Date: Mon, 13 Apr 2009 13:57:42 -0700
+Subject: [PATCH] DSS2: OMAPFB: Set line_length correctly for YUV with VRFB.
+
+Signed-off-by: Tim Yamin <plasm@roo.me.uk>
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |   30 +++++++++++++++++++++++++-----
+ 1 files changed, 25 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index 57f5900..cd63740 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -392,10 +392,19 @@ void set_fb_fix(struct fb_info *fbi)
+ 	fbi->screen_base = (char __iomem *)omapfb_get_region_vaddr(ofbi);
+ 
+ 	/* used by mmap in fbmem.c */
+-	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+-		fix->line_length =
+-			(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3;
+-	else
++	if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++		switch (var->nonstd) {
++		case OMAPFB_COLOR_YUV422:
++		case OMAPFB_COLOR_YUY422:
++			fix->line_length =
++				(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 2;
++			break;
++		default:
++			fix->line_length =
++				(OMAP_VRFB_LINE_LEN * var->bits_per_pixel) >> 3;
++			break;
++		}
++	} else
+ 		fix->line_length =
+ 			(var->xres_virtual * var->bits_per_pixel) >> 3;
+ 	fix->smem_start = omapfb_get_region_paddr(ofbi);
+@@ -704,7 +713,18 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+ 		goto err;
+ 	}
+ 
+-	screen_width = fix->line_length / (var->bits_per_pixel >> 3);
++	switch (var->nonstd) {
++	case OMAPFB_COLOR_YUV422:
++	case OMAPFB_COLOR_YUY422:
++		if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
++			screen_width = fix->line_length
++				/ (var->bits_per_pixel >> 2);
++			break;
++		}
++	default:
++		screen_width = fix->line_length / (var->bits_per_pixel >> 3);
++		break;
++	}
+ 
+ 	ovl->get_overlay_info(ovl, &info);
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch b/recipes/linux/linux-omap-pm/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch
new file mode 100644
index 0000000000..7e2bb48938
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0030-DSS2-dispc_get_trans_key-was-returning-wrong-key-ty.patch
@@ -0,0 +1,29 @@
+From bda19b9359d9dc60f8b0beb5685e173e236ee30f Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Wed, 15 Apr 2009 17:05:18 +0530
+Subject: [PATCH] DSS2: dispc_get_trans_key was returning wrong key type
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ drivers/video/omap2/dss/dispc.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 23a8155..076d3d4 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1826,9 +1826,9 @@ void dispc_get_trans_key(enum omap_channel ch,
+ 	enable_clocks(1);
+ 	if (type) {
+ 		if (ch == OMAP_DSS_CHANNEL_LCD)
+-			*type = REG_GET(DISPC_CONFIG, 11, 11) >> 11;
++			*type = REG_GET(DISPC_CONFIG, 11, 11);
+ 		else if (ch == OMAP_DSS_CHANNEL_DIGIT)
+-			*type = REG_GET(DISPC_CONFIG, 13, 13) >> 13;
++			*type = REG_GET(DISPC_CONFIG, 13, 13);
+ 		else
+ 			BUG();
+ 	}
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch b/recipes/linux/linux-omap-pm/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch
new file mode 100644
index 0000000000..ae777ed04e
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0031-DSS2-do-bootmem-reserve-for-exclusive-access.patch
@@ -0,0 +1,33 @@
+From 30c40f5e6b1794430f678bf23d3319354321cab7 Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Tue, 14 Apr 2009 14:50:11 +0200
+Subject: [PATCH] DSS2: do bootmem reserve for exclusive access
+
+BOOTMEM_DEFAULT would allow multiple reservations for the same location,
+we need to reserve the region for our exclusive use. Also check if the
+reserve succeeded.
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ arch/arm/plat-omap/vram.c |    5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c
+index f24a110..520f260 100644
+--- a/arch/arm/plat-omap/vram.c
++++ b/arch/arm/plat-omap/vram.c
+@@ -524,7 +524,10 @@ void __init omapfb_reserve_sdram(void)
+ 			return;
+ 		}
+ 
+-		reserve_bootmem(paddr, size, BOOTMEM_DEFAULT);
++		if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) {
++			pr_err("FB: failed to reserve VRAM\n");
++			return;
++		}
+ 	} else {
+ 		if (size > sdram_size) {
+ 			printk(KERN_ERR "Illegal SDRAM size for VRAM\n");
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch b/recipes/linux/linux-omap-pm/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch
new file mode 100644
index 0000000000..4959a760b1
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0032-DSS2-Fix-DISPC_VID_FIR-value-for-omap34xx.patch
@@ -0,0 +1,35 @@
+From ed7a9223f6785be03951c55f3b0695b0d5635c80 Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Thu, 9 Apr 2009 15:04:44 +0200
+Subject: [PATCH] DSS2: Fix DISPC_VID_FIR value for omap34xx
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+The msbs of the DISPC_VID_FIR fields were incorrectly masked out on
+omap34xx and thus 4:1 downscale did not work correctly.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |    5 ++++-
+ 1 files changed, 4 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 076d3d4..b8a3329 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -994,7 +994,10 @@ static void _dispc_set_fir(enum omap_plane plane, int hinc, int vinc)
+ 
+ 	BUG_ON(plane == OMAP_DSS_GFX);
+ 
+-	val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0);
++	if (cpu_is_omap24xx())
++		val = FLD_VAL(vinc, 27, 16) | FLD_VAL(hinc, 11, 0);
++	else
++		val = FLD_VAL(vinc, 28, 16) | FLD_VAL(hinc, 12, 0);
+ 	dispc_write_reg(fir_reg[plane-1], val);
+ }
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0033-DSS2-Prefer-3-tap-filter.patch b/recipes/linux/linux-omap-pm/dss2/0033-DSS2-Prefer-3-tap-filter.patch
new file mode 100644
index 0000000000..f643ca64f3
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0033-DSS2-Prefer-3-tap-filter.patch
@@ -0,0 +1,82 @@
+From 5390230ed12585a79683733209db34e9130b8e3b Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Thu, 9 Apr 2009 15:04:43 +0200
+Subject: [PATCH] DSS2: Prefer 3-tap filter
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+The 5-tap filter seems rather unstable. With some scaling settings it
+works and with some it doesn't even though the functional clock remains
+within the TRM limits. So prefer the 3-tap filter unless the functional
+clock required for it is too high.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |   27 ++++++++++++---------------
+ 1 files changed, 12 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index b8a3329..b631dd8 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1405,15 +1405,10 @@ static unsigned long calc_fclk_five_taps(u16 width, u16 height,
+ }
+ 
+ static unsigned long calc_fclk(u16 width, u16 height,
+-		u16 out_width, u16 out_height,
+-		enum omap_color_mode color_mode, bool five_taps)
++		u16 out_width, u16 out_height)
+ {
+ 	unsigned int hf, vf;
+ 
+-	if (five_taps)
+-		return calc_fclk_five_taps(width, height,
+-				out_width, out_height, color_mode);
+-
+ 	/*
+ 	 * FIXME how to determine the 'A' factor
+ 	 * for the no downscaling case ?
+@@ -1494,7 +1489,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	} else {
+ 		/* video plane */
+ 
+-		unsigned long fclk;
++		unsigned long fclk = 0;
+ 
+ 		if (out_width < width / maxdownscale ||
+ 		   out_width > width * 8)
+@@ -1530,20 +1525,22 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 		/* Must use 5-tap filter? */
+ 		five_taps = height > out_height * 2;
+ 
+-		/* Try to use 5-tap filter whenever possible. */
+-		if (cpu_is_omap34xx() && !five_taps &&
+-		    height > out_height && width <= 1024) {
+-			fclk = calc_fclk_five_taps(width, height,
+-					out_width, out_height, color_mode);
+-			if (fclk <= dispc_fclk_rate())
++		if (!five_taps) {
++			fclk = calc_fclk(width, height,
++					out_width, out_height);
++
++			/* Try 5-tap filter if 3-tap fclk is too high */
++			if (cpu_is_omap34xx() && height > out_height &&
++					fclk > dispc_fclk_rate())
+ 				five_taps = true;
+ 		}
+ 
+ 		if (width > (2048 >> five_taps))
+ 			return -EINVAL;
+ 
+-		fclk = calc_fclk(width, height, out_width, out_height,
+-				color_mode, five_taps);
++		if (five_taps)
++			fclk = calc_fclk_five_taps(width, height,
++					out_width, out_height, color_mode);
+ 
+ 		DSSDBG("required fclk rate = %lu Hz\n", fclk);
+ 		DSSDBG("current fclk rate = %lu Hz\n", dispc_fclk_rate());
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch b/recipes/linux/linux-omap-pm/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch
new file mode 100644
index 0000000000..fdfc25fb47
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0034-DSS2-VRAM-improve-omap_vram_add_region.patch
@@ -0,0 +1,135 @@
+From 946eb774e95cdc2f2fa5cdc24aa69229f82814b8 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 16 Apr 2009 17:56:00 +0300
+Subject: [PATCH] DSS2: VRAM: improve omap_vram_add_region()
+
+Combine postponed and non-posponed versions of omap_vram_add_region.
+Make the func non-static, so it can be called from board files.
+---
+ arch/arm/plat-omap/include/mach/vram.h |    1 +
+ arch/arm/plat-omap/vram.c              |   54 +++++++++++++------------------
+ 2 files changed, 24 insertions(+), 31 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/mach/vram.h b/arch/arm/plat-omap/include/mach/vram.h
+index f176562..8639e08 100644
+--- a/arch/arm/plat-omap/include/mach/vram.h
++++ b/arch/arm/plat-omap/include/mach/vram.h
+@@ -24,6 +24,7 @@
+ 
+ #include <asm/types.h>
+ 
++extern int omap_vram_add_region(unsigned long paddr, size_t size);
+ extern int omap_vram_free(unsigned long paddr, size_t size);
+ extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+ extern int omap_vram_reserve(unsigned long paddr, size_t size);
+diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c
+index 520f260..8e9fe77 100644
+--- a/arch/arm/plat-omap/vram.c
++++ b/arch/arm/plat-omap/vram.c
+@@ -60,6 +60,7 @@
+  * time when we cannot yet allocate the region list */
+ #define MAX_POSTPONED_REGIONS 10
+ 
++static bool vram_initialized;
+ static int postponed_cnt __initdata;
+ static struct {
+ 	unsigned long paddr;
+@@ -145,39 +146,32 @@ static void omap_vram_free_allocation(struct vram_alloc *va)
+ 	kfree(va);
+ }
+ 
+-static __init int omap_vram_add_region_postponed(unsigned long paddr,
+-		size_t size)
+-{
+-	if (postponed_cnt == MAX_POSTPONED_REGIONS)
+-		return -ENOMEM;
+-
+-	postponed_regions[postponed_cnt].paddr = paddr;
+-	postponed_regions[postponed_cnt].size = size;
+-
+-	++postponed_cnt;
+-
+-	return 0;
+-}
+-
+-/* add/remove_region can be exported if there's need to add/remove regions
+- * runtime */
+-static int omap_vram_add_region(unsigned long paddr, size_t size)
++int omap_vram_add_region(unsigned long paddr, size_t size)
+ {
+ 	struct vram_region *rm;
+ 	unsigned pages;
+ 
+-	DBG("adding region paddr %08lx size %d\n",
+-			paddr, size);
++	if (vram_initialized) {
++		DBG("adding region paddr %08lx size %d\n",
++				paddr, size);
+ 
+-	size &= PAGE_MASK;
+-	pages = size >> PAGE_SHIFT;
++		size &= PAGE_MASK;
++		pages = size >> PAGE_SHIFT;
+ 
+-	rm = omap_vram_create_region(paddr, pages);
+-	if (rm == NULL)
+-		return -ENOMEM;
++		rm = omap_vram_create_region(paddr, pages);
++		if (rm == NULL)
++			return -ENOMEM;
++
++		list_add(&rm->list, &region_list);
++	} else {
++		if (postponed_cnt == MAX_POSTPONED_REGIONS)
++			return -ENOMEM;
+ 
+-	list_add(&rm->list, &region_list);
++		postponed_regions[postponed_cnt].paddr = paddr;
++		postponed_regions[postponed_cnt].size = size;
+ 
++		++postponed_cnt;
++	}
+ 	return 0;
+ }
+ 
+@@ -438,6 +432,8 @@ static __init int omap_vram_init(void)
+ {
+ 	int i, r;
+ 
++	vram_initialized = 1;
++
+ 	for (i = 0; i < postponed_cnt; i++)
+ 		omap_vram_add_region(postponed_regions[i].paddr,
+ 				postponed_regions[i].size);
+@@ -472,10 +468,6 @@ static void __init omapfb_early_vram(char **p)
+ 	omapfb_def_sdram_vram_size = memparse(*p, p);
+ 	if (**p == ',')
+ 		omapfb_def_sdram_vram_start = simple_strtoul((*p) + 1, p, 16);
+-
+-	printk("omapfb_early_vram, %d, 0x%x\n",
+-			omapfb_def_sdram_vram_size,
+-			omapfb_def_sdram_vram_start);
+ }
+ __early_param("vram=", omapfb_early_vram);
+ 
+@@ -538,7 +530,7 @@ void __init omapfb_reserve_sdram(void)
+ 		BUG_ON(paddr & ~PAGE_MASK);
+ 	}
+ 
+-	omap_vram_add_region_postponed(paddr, size);
++	omap_vram_add_region(paddr, size);
+ 
+ 	pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
+ }
+@@ -594,7 +586,7 @@ unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
+ 		reserved = pend_avail - paddr;
+ 	size_avail = pend_avail - reserved - pstart_avail;
+ 
+-	omap_vram_add_region_postponed(paddr, size);
++	omap_vram_add_region(paddr, size);
+ 
+ 	if (reserved)
+ 		pr_info("Reserving %lu bytes SRAM for VRAM\n", reserved);
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch b/recipes/linux/linux-omap-pm/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch
new file mode 100644
index 0000000000..b7b395458f
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0035-DSS2-Added-the-function-pointer-for-getting-default.patch
@@ -0,0 +1,66 @@
+From f825cafd5ee5c600218740507f85594c825b0c00 Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Thu, 16 Apr 2009 18:47:49 +0530
+Subject: [PATCH] DSS2: Added the function pointer for getting default color.
+
+V4L2 Framework has a CID for getting/setting default color.
+So added the function pointer for doing same.
+SYSFS based getting the default color will remain same
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ arch/arm/plat-omap/include/mach/display.h |    1 +
+ drivers/video/omap2/dss/manager.c         |   11 +++++++----
+ 2 files changed, 8 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+index b0a6272..073cdda 100644
+--- a/arch/arm/plat-omap/include/mach/display.h
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -414,6 +414,7 @@ struct omap_overlay_manager {
+ 	int (*apply)(struct omap_overlay_manager *mgr);
+ 
+ 	void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color);
++	u32 (*get_default_color)(struct omap_overlay_manager *mgr);
+ 	void (*set_trans_key)(struct omap_overlay_manager *mgr,
+ 		enum omap_dss_color_key_type type,
+ 		u32 trans_key);
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index 8ca0bbb..12cf7b0 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -98,10 +98,8 @@ static ssize_t manager_display_store(struct omap_overlay_manager *mgr, const cha
+ static ssize_t manager_default_color_show(struct omap_overlay_manager *mgr,
+ 					  char *buf)
+ {
+-	u32 default_color;
+-
+-	default_color = dispc_get_default_color(mgr->id);
+-	return snprintf(buf, PAGE_SIZE, "%d", default_color);
++	return snprintf(buf, PAGE_SIZE, "%d",
++			mgr->get_default_color(mgr));
+ }
+ 
+ static ssize_t manager_default_color_store(struct omap_overlay_manager *mgr,
+@@ -470,6 +468,10 @@ static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr,
+ {
+ 	dispc_enable_trans_key(mgr->id, enable);
+ }
++static u32 omap_dss_mgr_get_default_color(struct omap_overlay_manager *mgr)
++{
++	return dispc_get_default_color(mgr->id);
++}
+ 
+ static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
+ {
+@@ -512,6 +514,7 @@ int dss_init_overlay_managers(struct platform_device *pdev)
+ 		mgr->set_default_color = &omap_dss_mgr_set_def_color,
+ 		mgr->set_trans_key = &omap_dss_mgr_set_trans_key,
+ 		mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key,
++		mgr->get_default_color = &omap_dss_mgr_get_default_color;
+ 		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC,
+ 
+ 		dss_overlay_setup_dispc_manager(mgr);
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch b/recipes/linux/linux-omap-pm/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch
new file mode 100644
index 0000000000..c6e9f16b3a
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0036-DSS2-Added-support-for-setting-and-querying-alpha-b.patch
@@ -0,0 +1,118 @@
+From 6c56dc10226c84f41917ac2117b0e654fa080d40 Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Thu, 16 Apr 2009 19:00:11 +0530
+Subject: [PATCH] DSS2: Added support for setting and querying alpha blending.
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ arch/arm/plat-omap/include/mach/display.h |    3 +++
+ drivers/video/omap2/dss/dispc.c           |   26 ++++++++++++++++++++++++++
+ drivers/video/omap2/dss/dss.h             |    2 ++
+ drivers/video/omap2/dss/manager.c         |   14 ++++++++++++++
+ 4 files changed, 45 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+index 073cdda..e1f615a 100644
+--- a/arch/arm/plat-omap/include/mach/display.h
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -415,11 +415,14 @@ struct omap_overlay_manager {
+ 
+ 	void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color);
+ 	u32 (*get_default_color)(struct omap_overlay_manager *mgr);
++	bool (*get_alpha_blending_status)(struct omap_overlay_manager *mgr);
+ 	void (*set_trans_key)(struct omap_overlay_manager *mgr,
+ 		enum omap_dss_color_key_type type,
+ 		u32 trans_key);
+ 	void (*enable_trans_key)(struct omap_overlay_manager *mgr,
+ 		bool enable);
++	void (*enable_alpha_blending)(struct omap_overlay_manager *mgr,
++			bool enable);
+ };
+ 
+ enum omap_display_caps {
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index b631dd8..7e551c2 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1847,6 +1847,32 @@ void dispc_enable_trans_key(enum omap_channel ch, bool enable)
+ 		REG_FLD_MOD(DISPC_CONFIG, enable, 12, 12);
+ 	enable_clocks(0);
+ }
++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable)
++{
++	enable_clocks(1);
++	if (ch == OMAP_DSS_CHANNEL_LCD)
++		REG_FLD_MOD(DISPC_CONFIG, enable, 18, 18);
++	else /* OMAP_DSS_CHANNEL_DIGIT */
++		REG_FLD_MOD(DISPC_CONFIG, enable, 19, 19);
++	enable_clocks(0);
++}
++bool dispc_alpha_blending_enabled(enum omap_channel ch)
++{
++	bool enabled;
++
++	enable_clocks(1);
++	if (ch == OMAP_DSS_CHANNEL_LCD)
++		enabled = REG_GET(DISPC_CONFIG, 18, 18);
++	else if (ch == OMAP_DSS_CHANNEL_DIGIT)
++		enabled = REG_GET(DISPC_CONFIG, 18, 18);
++	else
++		BUG();
++	enable_clocks(0);
++
++	return enabled;
++
++}
++
+ 
+ bool dispc_trans_key_enabled(enum omap_channel ch)
+ {
+diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
+index 584dce6..1d01ff6 100644
+--- a/drivers/video/omap2/dss/dss.h
++++ b/drivers/video/omap2/dss/dss.h
+@@ -294,7 +294,9 @@ void dispc_get_trans_key(enum omap_channel ch,
+ 		enum omap_dss_color_key_type *type,
+ 		u32 *trans_key);
+ void dispc_enable_trans_key(enum omap_channel ch, bool enable);
++void dispc_enable_alpha_blending(enum omap_channel ch, bool enable);
+ bool dispc_trans_key_enabled(enum omap_channel ch);
++bool dispc_alpha_blending_enabled(enum omap_channel ch);
+ 
+ void dispc_set_lcd_timings(struct omap_video_timings *timings);
+ unsigned long dispc_fclk_rate(void);
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index 12cf7b0..90acd28 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -468,6 +468,16 @@ static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr,
+ {
+ 	dispc_enable_trans_key(mgr->id, enable);
+ }
++static void omap_dss_mgr_enable_alpha_blending(struct omap_overlay_manager *mgr,
++		bool enable)
++{
++	dispc_enable_alpha_blending(mgr->id, enable);
++}
++static bool omap_dss_mgr_get_alpha_blending_status(
++		struct omap_overlay_manager *mgr)
++{
++	return dispc_alpha_blending_enabled(mgr->id);
++}
+ static u32 omap_dss_mgr_get_default_color(struct omap_overlay_manager *mgr)
+ {
+ 	return dispc_get_default_color(mgr->id);
+@@ -514,6 +524,10 @@ int dss_init_overlay_managers(struct platform_device *pdev)
+ 		mgr->set_default_color = &omap_dss_mgr_set_def_color,
+ 		mgr->set_trans_key = &omap_dss_mgr_set_trans_key,
+ 		mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key,
++		mgr->enable_alpha_blending =
++			&omap_dss_mgr_enable_alpha_blending;
++		mgr->get_alpha_blending_status =
++			omap_dss_mgr_get_alpha_blending_status;
+ 		mgr->get_default_color = &omap_dss_mgr_get_default_color;
+ 		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC,
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch b/recipes/linux/linux-omap-pm/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch
new file mode 100644
index 0000000000..fc62b09512
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0037-DSS2-Added-support-for-querying-color-keying.patch
@@ -0,0 +1,150 @@
+From 2c9edd6af31a812a9487dd8bc12322e105a29f44 Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Fri, 17 Apr 2009 09:42:36 +0530
+Subject: [PATCH] DSS2: Added support for querying color keying.
+
+V4L2 Framework has a ioctl for getting/setting color keying.
+So added the function manager pointers for doing same.
+
+Modifed the color keying sysfs entries to use manager
+function pointer. Earlier they were calling direcly
+dispc function to set/enable color keying.
+
+Some of color-keying function pointers in the overlay_manager
+structure re-named to be more specific.
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ arch/arm/plat-omap/include/mach/display.h |    6 ++++-
+ drivers/video/omap2/dss/manager.c         |   36 +++++++++++++++++++++--------
+ 2 files changed, 31 insertions(+), 11 deletions(-)
+
+diff --git a/arch/arm/plat-omap/include/mach/display.h b/arch/arm/plat-omap/include/mach/display.h
+index e1f615a..d0b4c83 100644
+--- a/arch/arm/plat-omap/include/mach/display.h
++++ b/arch/arm/plat-omap/include/mach/display.h
+@@ -416,7 +416,11 @@ struct omap_overlay_manager {
+ 	void (*set_default_color)(struct omap_overlay_manager *mgr, u32 color);
+ 	u32 (*get_default_color)(struct omap_overlay_manager *mgr);
+ 	bool (*get_alpha_blending_status)(struct omap_overlay_manager *mgr);
+-	void (*set_trans_key)(struct omap_overlay_manager *mgr,
++	bool (*get_trans_key_status)(struct omap_overlay_manager *mgr);
++	void (*get_trans_key_type_and_value)(struct omap_overlay_manager *mgr,
++		enum omap_dss_color_key_type *type,
++		u32 *trans_key);
++	void (*set_trans_key_type_and_value)(struct omap_overlay_manager *mgr,
+ 		enum omap_dss_color_key_type type,
+ 		u32 trans_key);
+ 	void (*enable_trans_key)(struct omap_overlay_manager *mgr,
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index 90acd28..e0501c4 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -124,7 +124,7 @@ static ssize_t manager_color_key_type_show(struct omap_overlay_manager *mgr,
+ {
+ 	enum omap_dss_color_key_type key_type;
+ 
+-	dispc_get_trans_key(mgr->id, &key_type, NULL);
++	mgr->get_trans_key_type_and_value(mgr, &key_type, NULL);
+ 	BUG_ON(key_type >= ARRAY_SIZE(color_key_type_str));
+ 
+ 	return snprintf(buf, PAGE_SIZE, "%s\n", color_key_type_str[key_type]);
+@@ -143,8 +143,8 @@ static ssize_t manager_color_key_type_store(struct omap_overlay_manager *mgr,
+ 	}
+ 	if (key_type == ARRAY_SIZE(color_key_type_str))
+ 		return -EINVAL;
+-	dispc_get_trans_key(mgr->id, NULL, &key_value);
+-	dispc_set_trans_key(mgr->id, key_type, key_value);
++	mgr->get_trans_key_type_and_value(mgr, NULL, &key_value);
++	mgr->set_trans_key_type_and_value(mgr, key_type, key_value);
+ 
+ 	return size;
+ }
+@@ -154,7 +154,7 @@ static ssize_t manager_color_key_value_show(struct omap_overlay_manager *mgr,
+ {
+ 	u32 key_value;
+ 
+-	dispc_get_trans_key(mgr->id, NULL, &key_value);
++	 mgr->get_trans_key_type_and_value(mgr, NULL, &key_value);
+ 
+ 	return snprintf(buf, PAGE_SIZE, "%d\n", key_value);
+ }
+@@ -167,8 +167,8 @@ static ssize_t manager_color_key_value_store(struct omap_overlay_manager *mgr,
+ 
+ 	if (sscanf(buf, "%d", &key_value) != 1)
+ 		return -EINVAL;
+-	dispc_get_trans_key(mgr->id, &key_type, NULL);
+-	dispc_set_trans_key(mgr->id, key_type, key_value);
++	mgr->get_trans_key_type_and_value(mgr, &key_type, NULL);
++	mgr->set_trans_key_type_and_value(mgr, key_type, key_value);
+ 
+ 	return size;
+ }
+@@ -177,7 +177,7 @@ static ssize_t manager_color_key_enabled_show(struct omap_overlay_manager *mgr,
+ 					      char *buf)
+ {
+ 	return snprintf(buf, PAGE_SIZE, "%d\n",
+-			dispc_trans_key_enabled(mgr->id));
++	mgr->get_trans_key_status(mgr));
+ }
+ 
+ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr,
+@@ -188,7 +188,7 @@ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr,
+ 	if (sscanf(buf, "%d", &enable) != 1)
+ 		return -EINVAL;
+ 
+-	dispc_enable_trans_key(mgr->id, enable);
++	mgr->enable_trans_key(mgr, enable);
+ 
+ 	return size;
+ }
+@@ -456,12 +456,20 @@ static void omap_dss_mgr_set_def_color(struct omap_overlay_manager *mgr,
+ 	dispc_set_default_color(mgr->id, color);
+ }
+ 
+-static void omap_dss_mgr_set_trans_key(struct omap_overlay_manager *mgr,
++static void omap_dss_mgr_set_trans_key_type_and_value(
++		struct omap_overlay_manager *mgr,
+ 		enum omap_dss_color_key_type type,
+ 		u32 trans_key)
+ {
+ 	dispc_set_trans_key(mgr->id, type, trans_key);
+ }
++static void omap_dss_mgr_get_trans_key_type_and_value(
++		struct omap_overlay_manager *mgr,
++		enum omap_dss_color_key_type *type,
++		u32 *trans_key)
++{
++	dispc_get_trans_key(mgr->id, type, trans_key);
++}
+ 
+ static void omap_dss_mgr_enable_trans_key(struct omap_overlay_manager *mgr,
+ 		bool enable)
+@@ -482,6 +490,10 @@ static u32 omap_dss_mgr_get_default_color(struct omap_overlay_manager *mgr)
+ {
+ 	return dispc_get_default_color(mgr->id);
+ }
++static bool omap_dss_mgr_get_trans_key_status(struct omap_overlay_manager *mgr)
++{
++	return dispc_trans_key_enabled(mgr->id);
++}
+ 
+ static void omap_dss_add_overlay_manager(struct omap_overlay_manager *manager)
+ {
+@@ -522,8 +534,12 @@ int dss_init_overlay_managers(struct platform_device *pdev)
+ 		mgr->unset_display = &omap_dss_unset_display,
+ 		mgr->apply = &omap_dss_mgr_apply,
+ 		mgr->set_default_color = &omap_dss_mgr_set_def_color,
+-		mgr->set_trans_key = &omap_dss_mgr_set_trans_key,
++		mgr->set_trans_key_type_and_value =
++			&omap_dss_mgr_set_trans_key_type_and_value,
++		mgr->get_trans_key_type_and_value =
++			&omap_dss_mgr_get_trans_key_type_and_value,
+ 		mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key,
++		mgr->get_trans_key_status = &omap_dss_mgr_get_trans_key_status,
+ 		mgr->enable_alpha_blending =
+ 			&omap_dss_mgr_enable_alpha_blending;
+ 		mgr->get_alpha_blending_status =
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch b/recipes/linux/linux-omap-pm/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch
new file mode 100644
index 0000000000..65cb113574
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0038-DSS2-OMAPFB-Some-color-keying-pointerd-renamed-in-D.patch
@@ -0,0 +1,56 @@
+From 9e8877f0e5b17d3ddd101d6a63aa86fdb14d35d5 Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Fri, 17 Apr 2009 09:51:25 +0530
+Subject: [PATCH] DSS2:OMAPFB: Some color keying pointerd renamed in DSS2. Replicated in FB
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ drivers/video/omap2/omapfb/omapfb-ioctl.c |   11 +++++++----
+ 1 files changed, 7 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
+index 7f18d2a..79d8916 100644
+--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
++++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
+@@ -288,7 +288,8 @@ static int _omapfb_set_color_key(struct omap_overlay_manager *mgr,
+ {
+ 	enum omap_dss_color_key_type kt;
+ 
+-	if(!mgr->set_default_color || !mgr->set_trans_key ||
++	if (!mgr->set_default_color ||
++			!mgr->set_trans_key_type_and_value ||
+ 			!mgr->enable_trans_key)
+ 		return 0;
+ 
+@@ -310,7 +311,7 @@ static int _omapfb_set_color_key(struct omap_overlay_manager *mgr,
+ 	}
+ 
+ 	mgr->set_default_color(mgr, ck->background);
+-	mgr->set_trans_key(mgr, kt, ck->trans_key);
++	mgr->set_trans_key_type_and_value(mgr, kt, ck->trans_key);
+ 	mgr->enable_trans_key(mgr, 1);
+ 
+ 	omapfb_color_keys[mgr->id] = *ck;
+@@ -341,7 +342,8 @@ static int omapfb_set_color_key(struct fb_info *fbi,
+ 		goto err;
+ 	}
+ 
+-	if(!mgr->set_default_color || !mgr->set_trans_key ||
++	if (!mgr->set_default_color ||
++			!mgr->set_trans_key_type_and_value ||
+ 			!mgr->enable_trans_key) {
+ 		r = -ENODEV;
+ 		goto err;
+@@ -377,7 +379,8 @@ static int omapfb_get_color_key(struct fb_info *fbi,
+ 		goto err;
+ 	}
+ 
+-	if(!mgr->set_default_color || !mgr->set_trans_key ||
++	if (!mgr->set_default_color ||
++			!mgr->set_trans_key_type_and_value ||
+ 			!mgr->enable_trans_key) {
+ 		r = -ENODEV;
+ 		goto err;
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch b/recipes/linux/linux-omap-pm/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch
new file mode 100644
index 0000000000..af8c2cd09b
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0039-DSS2-Add-sysfs-entry-to-for-the-alpha-blending-supp.patch
@@ -0,0 +1,59 @@
+From 6f1f0c7b19ecb468824b79f9d181ef0da41b7d7d Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Fri, 17 Apr 2009 13:58:21 +0530
+Subject: [PATCH] DSS2: Add sysfs entry to for the alpha blending support.
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ drivers/video/omap2/dss/manager.c |   21 +++++++++++++++++++++
+ 1 files changed, 21 insertions(+), 0 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index e0501c4..7965a84 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -192,6 +192,22 @@ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr,
+ 
+ 	return size;
+ }
++static ssize_t manager_alpha_blending_enabled_show(
++		struct omap_overlay_manager *mgr, char *buf)
++{
++	return snprintf(buf, PAGE_SIZE, "%d\n",
++			mgr->get_alpha_blending_status(mgr));
++}
++static ssize_t manager_alpha_blending_enabled_store(
++		struct omap_overlay_manager *mgr,
++		const char *buf, size_t size)
++{
++	int enable;
++	if (sscanf(buf, "%d", &enable) != 1)
++		return -EINVAL;
++	mgr->enable_alpha_blending(mgr, enable);
++	return size;
++}
+ 
+ 
+ struct manager_attribute {
+@@ -215,6 +231,10 @@ static MANAGER_ATTR(color_key_value, S_IRUGO|S_IWUSR,
+ 		manager_color_key_value_show, manager_color_key_value_store);
+ static MANAGER_ATTR(color_key_enabled, S_IRUGO|S_IWUSR,
+ 		manager_color_key_enabled_show, manager_color_key_enabled_store);
++static MANAGER_ATTR(alpha_blending_enabled, S_IRUGO|S_IWUSR,
++		manager_alpha_blending_enabled_show,
++		manager_alpha_blending_enabled_store);
++
+ 
+ static struct attribute *manager_sysfs_attrs[] = {
+ 	&manager_attr_name.attr,
+@@ -223,6 +243,7 @@ static struct attribute *manager_sysfs_attrs[] = {
+ 	&manager_attr_color_key_type.attr,
+ 	&manager_attr_color_key_value.attr,
+ 	&manager_attr_color_key_enabled.attr,
++	&manager_attr_alpha_blending_enabled.attr,
+ 	NULL
+ };
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch b/recipes/linux/linux-omap-pm/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch
new file mode 100644
index 0000000000..66be75f3f7
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0040-DSS2-Provided-proper-exclusion-for-destination-colo.patch
@@ -0,0 +1,97 @@
+From a5129f272a48aa22629137c9c31e60eddb8c3f5d Mon Sep 17 00:00:00 2001
+From: Hardik Shah <hardik.shah@ti.com>
+Date: Fri, 17 Apr 2009 14:24:46 +0530
+Subject: [PATCH] DSS2: Provided proper exclusion for destination color keying and alpha blending.
+
+OMAP does not support destination color key and alpha blending
+simultaneously.  So this patch does not allow the user
+so set both at a time.
+
+Signed-off-by: Hardik Shah <hardik.shah@ti.com>
+---
+ drivers/video/omap2/dss/manager.c |   50 ++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 49 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index 7965a84..108489c 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -137,12 +137,26 @@ static ssize_t manager_color_key_type_store(struct omap_overlay_manager *mgr,
+ 	u32 key_value;
+ 
+ 	for (key_type = OMAP_DSS_COLOR_KEY_GFX_DST;
+-	     key_type < ARRAY_SIZE(color_key_type_str); key_type++) {
++			key_type < ARRAY_SIZE(color_key_type_str); key_type++) {
+ 		if (sysfs_streq(buf, color_key_type_str[key_type]))
+ 			break;
+ 	}
+ 	if (key_type == ARRAY_SIZE(color_key_type_str))
+ 		return -EINVAL;
++	/* OMAP does not support destination color key and alpha blending
++	 * simultaneously.  So if alpha blending and color keying both are
++	 * enabled then refrain from setting the color key type to
++	 * gfx-destination
++	 */
++	if (!key_type) {
++		bool color_key_enabled;
++		bool alpha_blending_enabled;
++		color_key_enabled = mgr->get_trans_key_status(mgr);
++		alpha_blending_enabled = mgr->get_alpha_blending_status(mgr);
++		if (color_key_enabled && alpha_blending_enabled)
++			return -EINVAL;
++	}
++
+ 	mgr->get_trans_key_type_and_value(mgr, NULL, &key_value);
+ 	mgr->set_trans_key_type_and_value(mgr, key_type, key_value);
+ 
+@@ -188,6 +202,23 @@ static ssize_t manager_color_key_enabled_store(struct omap_overlay_manager *mgr,
+ 	if (sscanf(buf, "%d", &enable) != 1)
+ 		return -EINVAL;
+ 
++	/* OMAP does not support destination color keying and
++	 * alpha blending simultaneously.  so if alpha blending
++	 * is enabled refrain from enabling destination color
++	 * keying.
++	 */
++	if (enable) {
++		bool enabled;
++		enabled = mgr->get_alpha_blending_status(mgr);
++		if (enabled) {
++			enum omap_dss_color_key_type key_type;
++			mgr->get_trans_key_type_and_value(mgr,
++					&key_type, NULL);
++			if (!key_type)
++				return -EINVAL;
++		}
++
++	}
+ 	mgr->enable_trans_key(mgr, enable);
+ 
+ 	return size;
+@@ -205,6 +236,23 @@ static ssize_t manager_alpha_blending_enabled_store(
+ 	int enable;
+ 	if (sscanf(buf, "%d", &enable) != 1)
+ 		return -EINVAL;
++	/* OMAP does not support destination color keying and
++	 * alpha blending simultaneously.  so if destination
++	 * color keying is enabled refrain from enabling
++	 * alpha blending
++	 */
++	if (enable) {
++		bool enabled;
++		enabled = mgr->get_trans_key_status(mgr);
++		if (enabled) {
++			enum omap_dss_color_key_type key_type;
++			mgr->get_trans_key_type_and_value(mgr, &key_type, NULL);
++			if (!key_type)
++				return -EINVAL;
++
++		}
++
++	}
+ 	mgr->enable_alpha_blending(mgr, enable);
+ 	return size;
+ }
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch b/recipes/linux/linux-omap-pm/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch
new file mode 100644
index 0000000000..6785ade279
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0041-DSS2-Disable-vertical-offset-with-fieldmode.patch
@@ -0,0 +1,71 @@
+From 9bcac9b9e678f476c83b5679b1215b6bc946130a Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Mon, 20 Apr 2009 16:26:18 +0200
+Subject: [PATCH] DSS2: Disable vertical offset with fieldmode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+When using fieldmode each field is basically a separate picture so the
+vertical filter should start at phase 0 for both fields.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |   23 +++++++++--------------
+ 1 files changed, 9 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 7e551c2..f15614b 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1029,12 +1029,12 @@ static void _dispc_set_vid_accu1(enum omap_plane plane, int haccu, int vaccu)
+ static void _dispc_set_scaling(enum omap_plane plane,
+ 		u16 orig_width, u16 orig_height,
+ 		u16 out_width, u16 out_height,
+-		bool ilace, bool five_taps)
++		bool ilace, bool five_taps,
++		bool fieldmode)
+ {
+ 	int fir_hinc;
+ 	int fir_vinc;
+ 	int hscaleup, vscaleup;
+-	int fieldmode = 0;
+ 	int accu0 = 0;
+ 	int accu1 = 0;
+ 	u32 l;
+@@ -1072,17 +1072,12 @@ static void _dispc_set_scaling(enum omap_plane plane,
+ 
+ 	dispc_write_reg(dispc_reg_att[plane], l);
+ 
+-	if (ilace) {
+-		if (fieldmode) {
+-			accu0 = fir_vinc / 2;
+-			accu1 = 0;
+-		} else {
+-			accu0 = 0;
+-			accu1 = fir_vinc / 2;
+-			if (accu1 >= 1024/2) {
+-				accu0 = 1024/2;
+-				accu1 -= accu0;
+-			}
++	if (ilace && !fieldmode) {
++		accu0 = 0;
++		accu1 = fir_vinc / 2;
++		if (accu1 >= 1024/2) {
++			accu0 = 1024/2;
++			accu1 -= accu0;
+ 		}
+ 	}
+ 
+@@ -1582,7 +1577,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	if (plane != OMAP_DSS_GFX) {
+ 		_dispc_set_scaling(plane, width, height,
+ 				   out_width, out_height,
+-				   ilace, five_taps);
++				   ilace, five_taps, fieldmode);
+ 		_dispc_set_vid_size(plane, out_width, out_height);
+ 		_dispc_set_vid_color_conv(plane, cconv);
+ 	}
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch b/recipes/linux/linux-omap-pm/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch
new file mode 100644
index 0000000000..5264911b41
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0042-DSS2-Don-t-enable-fieldmode-automatically.patch
@@ -0,0 +1,34 @@
+From 9c6de0fed6e8a598d026d348533fdf731b737d55 Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Mon, 20 Apr 2009 16:26:19 +0200
+Subject: [PATCH] DSS2: Don't enable fieldmode automatically
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+The only case where enabling fieldmode automatically seems reasonable
+is when source and destination heights are equal. Some kind of user
+controllable knob should be added so the user could enable field mode
+when the source is interlaced.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index f15614b..1c036c1 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1450,7 +1450,7 @@ static int _dispc_setup_plane(enum omap_plane plane,
+ 	if (paddr == 0)
+ 		return -EINVAL;
+ 
+-	if (ilace && height >= out_height)
++	if (ilace && height == out_height)
+ 		fieldmode = 1;
+ 
+ 	if (ilace) {
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch b/recipes/linux/linux-omap-pm/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch
new file mode 100644
index 0000000000..76e37817c4
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0043-DSS2-Swap-field-0-and-field-1-registers.patch
@@ -0,0 +1,170 @@
+From 35e88797e93b107ba602dee1e2ac8ea761dccd4b Mon Sep 17 00:00:00 2001
+From: =?utf-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@nokia.com>
+Date: Mon, 20 Apr 2009 16:26:20 +0200
+Subject: [PATCH] DSS2: Swap field 0 and field 1 registers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf-8
+Content-Transfer-Encoding: 8bit
+
+The values for the registers which have alternate values for each field
+were reveresed to what the hardware expects. For the hardware field 0
+is the even field or the bottom field, field 1 is the odd field or the
+top field. So simply swap the register values.
+
+Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
+---
+ drivers/video/omap2/dss/dispc.c |   66 ++++++++++++++++++++++-----------------
+ 1 files changed, 37 insertions(+), 29 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
+index 1c036c1..9bab6cf 100644
+--- a/drivers/video/omap2/dss/dispc.c
++++ b/drivers/video/omap2/dss/dispc.c
+@@ -1072,12 +1072,16 @@ static void _dispc_set_scaling(enum omap_plane plane,
+ 
+ 	dispc_write_reg(dispc_reg_att[plane], l);
+ 
++	/*
++	 * field 0 = even field = bottom field
++	 * field 1 = odd field = top field
++	 */
+ 	if (ilace && !fieldmode) {
+-		accu0 = 0;
+-		accu1 = fir_vinc / 2;
+-		if (accu1 >= 1024/2) {
+-			accu0 = 1024/2;
+-			accu1 -= accu0;
++		accu1 = 0;
++		accu0 = fir_vinc / 2;
++		if (accu0 >= 1024/2) {
++			accu1 = 1024/2;
++			accu0 -= accu1;
+ 		}
+ 	}
+ 
+@@ -1266,34 +1270,38 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 		fbh = width;
+ 	}
+ 
++	/*
++	 * field 0 = even field = bottom field
++	 * field 1 = odd field = top field
++	 */
+ 	switch (rotation + mirror * 4) {
+ 	case 0:
+-		*offset0 = 0;
++		*offset1 = 0;
+ 		if (fieldmode)
+-			*offset1 = screen_width * ps;
++			*offset0 = screen_width * ps;
+ 		else
+-			*offset1 = 0;
++			*offset0 = 0;
+ 		*row_inc = pixinc(1 + (screen_width - fbw) +
+ 				(fieldmode ? screen_width : 0),
+ 				ps);
+ 		*pix_inc = pixinc(1, ps);
+ 		break;
+ 	case 1:
+-		*offset0 = screen_width * (fbh - 1) * ps;
++		*offset1 = screen_width * (fbh - 1) * ps;
+ 		if (fieldmode)
+-			*offset1 = *offset0 + ps;
++			*offset0 = *offset1 + ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(screen_width * (fbh - 1) + 1 +
+ 				(fieldmode ? 1 : 0), ps);
+ 		*pix_inc = pixinc(-screen_width, ps);
+ 		break;
+ 	case 2:
+-		*offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps;
++		*offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
+ 		if (fieldmode)
+-			*offset1 = *offset0 - screen_width * ps;
++			*offset0 = *offset1 - screen_width * ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(-1 -
+ 				(screen_width - fbw) -
+ 				(fieldmode ? screen_width : 0),
+@@ -1301,11 +1309,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 		*pix_inc = pixinc(-1, ps);
+ 		break;
+ 	case 3:
+-		*offset0 = (fbw - 1) * ps;
++		*offset1 = (fbw - 1) * ps;
+ 		if (fieldmode)
+-			*offset1 = *offset0 - ps;
++			*offset0 = *offset1 - ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(-screen_width * (fbh - 1) - 1 -
+ 				(fieldmode ? 1 : 0), ps);
+ 		*pix_inc = pixinc(screen_width, ps);
+@@ -1313,11 +1321,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 
+ 	/* mirroring */
+ 	case 0 + 4:
+-		*offset0 = (fbw - 1) * ps;
++		*offset1 = (fbw - 1) * ps;
+ 		if (fieldmode)
+-			*offset1 = *offset0 + screen_width * ps;
++			*offset0 = *offset1 + screen_width * ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(screen_width * 2 - 1 +
+ 				(fieldmode ? screen_width : 0),
+ 				ps);
+@@ -1325,11 +1333,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 		break;
+ 
+ 	case 1 + 4:
+-		*offset0 = 0;
++		*offset1 = 0;
+ 		if (fieldmode)
+-			*offset1 = *offset0 + screen_width * ps;
++			*offset0 = *offset1 + screen_width * ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(-screen_width * (fbh - 1) + 1 +
+ 				(fieldmode ? 1 : 0),
+ 				ps);
+@@ -1337,11 +1345,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 		break;
+ 
+ 	case 2 + 4:
+-		*offset0 = screen_width * (fbh - 1) * ps;
++		*offset1 = screen_width * (fbh - 1) * ps;
+ 		if (fieldmode)
+-			*offset1 = *offset0 + screen_width * ps;
++			*offset0 = *offset1 + screen_width * ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(1 - screen_width * 2 -
+ 				(fieldmode ? screen_width : 0),
+ 				ps);
+@@ -1349,11 +1357,11 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
+ 		break;
+ 
+ 	case 3 + 4:
+-		*offset0 = (screen_width * (fbh - 1) + fbw - 1) * ps;
++		*offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;
+ 		if (fieldmode)
+-			*offset1 = *offset0 + screen_width * ps;
++			*offset0 = *offset1 + screen_width * ps;
+ 		else
+-			*offset1 = *offset0;
++			*offset0 = *offset1;
+ 		*row_inc = pixinc(screen_width * (fbh - 1) - 1 -
+ 				(fieldmode ? 1 : 0),
+ 				ps);
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch b/recipes/linux/linux-omap-pm/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch
new file mode 100644
index 0000000000..32def9e8d5
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0044-DSS2-add-sysfs-entry-for-seting-the-rotate-type.patch
@@ -0,0 +1,76 @@
+From a9b3500bd14609750a2337e866e1df62627c1bac Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Mon, 20 Apr 2009 14:55:33 +0200
+Subject: [PATCH] DSS2: add sysfs entry for seting the rotate type
+
+This can help in utilizing VRAM memory better. Since with VRFB rotation
+we waste a lot of physical memory due to the VRFB HW design, provide the
+possibility to turn it off and free the extra memory for the use by other
+planes for example.
+---
+ drivers/video/omap2/omapfb/omapfb-sysfs.c |   42 ++++++++++++++++++++++++++++-
+ 1 files changed, 41 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+index 2c88718..4e3da42 100644
+--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+@@ -43,6 +43,46 @@ static ssize_t show_rotate_type(struct device *dev,
+ 	return snprintf(buf, PAGE_SIZE, "%d\n", ofbi->rotation_type);
+ }
+ 
++static ssize_t store_rotate_type(struct device *dev,
++		struct device_attribute *attr,
++		const char *buf, size_t count)
++{
++	struct fb_info *fbi = dev_get_drvdata(dev);
++	struct omapfb_info *ofbi = FB2OFB(fbi);
++	struct omapfb2_device *fbdev = ofbi->fbdev;
++	enum omap_dss_rotation_type rot_type;
++	int r;
++
++	rot_type = simple_strtoul(buf, NULL, 0);
++
++	if (rot_type != OMAP_DSS_ROT_DMA && rot_type != OMAP_DSS_ROT_VRFB)
++		return -EINVAL;
++
++	omapfb_lock(fbdev);
++
++	r = 0;
++	if (rot_type == ofbi->rotation_type)
++		goto out;
++
++	r = -EBUSY;
++	if (ofbi->region.size)
++		goto out;
++
++	ofbi->rotation_type = rot_type;
++
++	/*
++	 * Since the VRAM for this FB is not allocated at the moment we don't need to
++	 * do any further parameter checking at this point.
++	 */
++
++	r = count;
++out:
++	omapfb_unlock(fbdev);
++
++	return r;
++}
++
++
+ static ssize_t show_mirror(struct device *dev,
+ 		struct device_attribute *attr, char *buf)
+ {
+@@ -327,7 +367,7 @@ static ssize_t show_virt(struct device *dev,
+ }
+ 
+ static struct device_attribute omapfb_attrs[] = {
+-	__ATTR(rotate_type, S_IRUGO, show_rotate_type, NULL),
++	__ATTR(rotate_type, S_IRUGO | S_IWUSR, show_rotate_type, store_rotate_type),
+ 	__ATTR(mirror, S_IRUGO | S_IWUSR, show_mirror, store_mirror),
+ 	__ATTR(size, S_IRUGO | S_IWUSR, show_size, store_size),
+ 	__ATTR(overlays, S_IRUGO | S_IWUSR, show_overlays, store_overlays),
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0045-DSS2-Fixed-line-endings-from-to.patch b/recipes/linux/linux-omap-pm/dss2/0045-DSS2-Fixed-line-endings-from-to.patch
new file mode 100644
index 0000000000..9382469850
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0045-DSS2-Fixed-line-endings-from-to.patch
@@ -0,0 +1,48 @@
+From b0e081456a9b094109c04467d041ff693843ca47 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Tue, 21 Apr 2009 09:25:16 +0300
+Subject: [PATCH] DSS2: Fixed line endings from , to ;
+
+---
+ drivers/video/omap2/dss/manager.c |   18 +++++++++---------
+ 1 files changed, 9 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
+index 108489c..bf059e0 100644
+--- a/drivers/video/omap2/dss/manager.c
++++ b/drivers/video/omap2/dss/manager.c
+@@ -599,22 +599,22 @@ int dss_init_overlay_managers(struct platform_device *pdev)
+ 			break;
+ 		}
+ 
+-		mgr->set_display = &omap_dss_set_display,
+-		mgr->unset_display = &omap_dss_unset_display,
+-		mgr->apply = &omap_dss_mgr_apply,
+-		mgr->set_default_color = &omap_dss_mgr_set_def_color,
++		mgr->set_display = &omap_dss_set_display;
++		mgr->unset_display = &omap_dss_unset_display;
++		mgr->apply = &omap_dss_mgr_apply;
++		mgr->set_default_color = &omap_dss_mgr_set_def_color;
+ 		mgr->set_trans_key_type_and_value =
+-			&omap_dss_mgr_set_trans_key_type_and_value,
++			&omap_dss_mgr_set_trans_key_type_and_value;
+ 		mgr->get_trans_key_type_and_value =
+-			&omap_dss_mgr_get_trans_key_type_and_value,
+-		mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key,
+-		mgr->get_trans_key_status = &omap_dss_mgr_get_trans_key_status,
++			&omap_dss_mgr_get_trans_key_type_and_value;
++		mgr->enable_trans_key = &omap_dss_mgr_enable_trans_key;
++		mgr->get_trans_key_status = &omap_dss_mgr_get_trans_key_status;
+ 		mgr->enable_alpha_blending =
+ 			&omap_dss_mgr_enable_alpha_blending;
+ 		mgr->get_alpha_blending_status =
+ 			omap_dss_mgr_get_alpha_blending_status;
+ 		mgr->get_default_color = &omap_dss_mgr_get_default_color;
+-		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC,
++		mgr->caps = OMAP_DSS_OVL_MGR_CAP_DISPC;
+ 
+ 		dss_overlay_setup_dispc_manager(mgr);
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch b/recipes/linux/linux-omap-pm/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch
new file mode 100644
index 0000000000..4ae5fbdd9a
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0046-DSS2-DSI-decrease-sync-timeout-from-60s-to-2s.patch
@@ -0,0 +1,26 @@
+From 0f88992b2681aed4f31dc7dd3926b357bbc95154 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Tue, 21 Apr 2009 10:11:55 +0300
+Subject: [PATCH] DSS2: DSI: decrease sync timeout from 60s to 2s
+
+The framedone-problem should be ok now, so we shouldn't get long waits.
+---
+ drivers/video/omap2/dss/dsi.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
+index 50af925..d59ad38 100644
+--- a/drivers/video/omap2/dss/dsi.c
++++ b/drivers/video/omap2/dss/dsi.c
+@@ -3216,7 +3216,7 @@ static void dsi_push_set_mirror(struct omap_display *display, int mirror)
+ 
+ static int dsi_wait_sync(struct omap_display *display)
+ {
+-	long wait = msecs_to_jiffies(60000);
++	long wait = msecs_to_jiffies(2000);
+ 	struct completion compl;
+ 
+ 	DSSDBGF("");
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch b/recipes/linux/linux-omap-pm/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch
new file mode 100644
index 0000000000..0b0f104b30
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0047-DSS2-fix-return-value-for-rotate_type-sysfs-functio.patch
@@ -0,0 +1,44 @@
+From 7ddd5eaa7bc345c3719d613a46a95b7e8052ad2c Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Tue, 21 Apr 2009 15:18:36 +0200
+Subject: [PATCH] DSS2: fix return value for rotate_type sysfs function
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ drivers/video/omap2/omapfb/omapfb-sysfs.c |    9 ++++-----
+ 1 files changed, 4 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+index 4e3da42..13028ae 100644
+--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
++++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
+@@ -64,9 +64,10 @@ static ssize_t store_rotate_type(struct device *dev,
+ 	if (rot_type == ofbi->rotation_type)
+ 		goto out;
+ 
+-	r = -EBUSY;
+-	if (ofbi->region.size)
++	if (ofbi->region.size) {
++		r = -EBUSY;
+ 		goto out;
++	}
+ 
+ 	ofbi->rotation_type = rot_type;
+ 
+@@ -74,12 +75,10 @@ static ssize_t store_rotate_type(struct device *dev,
+ 	 * Since the VRAM for this FB is not allocated at the moment we don't need to
+ 	 * do any further parameter checking at this point.
+ 	 */
+-
+-	r = count;
+ out:
+ 	omapfb_unlock(fbdev);
+ 
+-	return r;
++	return r ? r : count;
+ }
+ 
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch b/recipes/linux/linux-omap-pm/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch
new file mode 100644
index 0000000000..cc6663fa21
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0048-OMAP2-3-DMA-implement-trans-copy-and-const-fill.patch
@@ -0,0 +1,123 @@
+From e34564db95627ad20e918b240c45e2bd5555f7e8 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 22 Apr 2009 10:06:08 +0300
+Subject: [PATCH] OMAP2/3: DMA: implement trans copy and const fill
+
+Implement transparent copy and constant fill features for OMAP2/3.
+
+Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+---
+ arch/arm/plat-omap/dma.c              |   81 +++++++++++++++++++++------------
+ arch/arm/plat-omap/include/mach/dma.h |    1 +
+ 2 files changed, 52 insertions(+), 30 deletions(-)
+
+diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
+index 3fd0e77..060ac71 100755
+--- a/arch/arm/plat-omap/dma.c
++++ b/arch/arm/plat-omap/dma.c
+@@ -310,41 +310,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
+ 
+ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
+ {
+-	u16 w;
+-
+ 	BUG_ON(omap_dma_in_1510_mode());
+ 
+-	if (cpu_class_is_omap2()) {
+-		REVISIT_24XX();
+-		return;
+-	}
++	if (cpu_class_is_omap1()) {
++		u16 w;
+ 
+-	w = dma_read(CCR2(lch));
+-	w &= ~0x03;
++		w = dma_read(CCR2(lch));
++		w &= ~0x03;
+ 
+-	switch (mode) {
+-	case OMAP_DMA_CONSTANT_FILL:
+-		w |= 0x01;
+-		break;
+-	case OMAP_DMA_TRANSPARENT_COPY:
+-		w |= 0x02;
+-		break;
+-	case OMAP_DMA_COLOR_DIS:
+-		break;
+-	default:
+-		BUG();
++		switch (mode) {
++		case OMAP_DMA_CONSTANT_FILL:
++			w |= 0x01;
++			break;
++		case OMAP_DMA_TRANSPARENT_COPY:
++			w |= 0x02;
++			break;
++		case OMAP_DMA_COLOR_DIS:
++			break;
++		default:
++			BUG();
++		}
++		dma_write(w, CCR2(lch));
++
++		w = dma_read(LCH_CTRL(lch));
++		w &= ~0x0f;
++		/* Default is channel type 2D */
++		if (mode) {
++			dma_write((u16)color, COLOR_L(lch));
++			dma_write((u16)(color >> 16), COLOR_U(lch));
++			w |= 1;		/* Channel type G */
++		}
++		dma_write(w, LCH_CTRL(lch));
+ 	}
+-	dma_write(w, CCR2(lch));
+ 
+-	w = dma_read(LCH_CTRL(lch));
+-	w &= ~0x0f;
+-	/* Default is channel type 2D */
+-	if (mode) {
+-		dma_write((u16)color, COLOR_L(lch));
+-		dma_write((u16)(color >> 16), COLOR_U(lch));
+-		w |= 1;		/* Channel type G */
++	if (cpu_class_is_omap2()) {
++		u32 val;
++
++		val = dma_read(CCR(lch));
++		val &= ~((1 << 17) | (1 << 16));
++
++		switch (mode) {
++		case OMAP_DMA_CONSTANT_FILL:
++			val |= 1 << 16;
++			break;
++		case OMAP_DMA_TRANSPARENT_COPY:
++			val |= 1 << 17;
++			break;
++		case OMAP_DMA_COLOR_DIS:
++			break;
++		default:
++			BUG();
++		}
++		dma_write(val, CCR(lch));
++
++		color &= 0xffffff;
++		dma_write(color, COLOR(lch));
+ 	}
+-	dma_write(w, LCH_CTRL(lch));
+ }
+ EXPORT_SYMBOL(omap_set_dma_color_mode);
+ 
+diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
+index 224b077..4e34f47 100644
+--- a/arch/arm/plat-omap/include/mach/dma.h
++++ b/arch/arm/plat-omap/include/mach/dma.h
+@@ -144,6 +144,7 @@
+ #define OMAP_DMA4_CSSA_U(n)		0
+ #define OMAP_DMA4_CDSA_L(n)		0
+ #define OMAP_DMA4_CDSA_U(n)		0
++#define OMAP1_DMA_COLOR(n)		0
+ 
+ /*----------------------------------------------------------------------------*/
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch b/recipes/linux/linux-omap-pm/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch
new file mode 100644
index 0000000000..e9fc76ce15
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0049-DSS2-VRAM-clear-allocated-area-with-DMA.patch
@@ -0,0 +1,101 @@
+From 02034cc79f69512a6037f03ad1243c28f59fdd8a Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 22 Apr 2009 10:25:20 +0300
+Subject: [PATCH] DSS2: VRAM: clear allocated area with DMA
+
+Use DMA constant fill feature to clear VRAM area when
+someone allocates it.
+---
+ arch/arm/plat-omap/vram.c |   57 +++++++++++++++++++++++++++++++++++++++++++++
+ 1 files changed, 57 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c
+index 8e9fe77..90276ac 100644
+--- a/arch/arm/plat-omap/vram.c
++++ b/arch/arm/plat-omap/vram.c
+@@ -31,11 +31,13 @@
+ #include <linux/seq_file.h>
+ #include <linux/bootmem.h>
+ #include <linux/omapfb.h>
++#include <linux/completion.h>
+ 
+ #include <asm/setup.h>
+ 
+ #include <mach/sram.h>
+ #include <mach/vram.h>
++#include <mach/dma.h>
+ 
+ #ifdef DEBUG
+ #define DBG(format, ...) printk(KERN_DEBUG "VRAM: " format, ## __VA_ARGS__)
+@@ -276,6 +278,59 @@ int omap_vram_reserve(unsigned long paddr, size_t size)
+ }
+ EXPORT_SYMBOL(omap_vram_reserve);
+ 
++static void _omap_vram_dma_cb(int lch, u16 ch_status, void *data)
++{
++	struct completion *compl = data;
++	complete(compl);
++}
++
++static int _omap_vram_clear(u32 paddr, unsigned pages)
++{
++	struct completion compl;
++        unsigned elem_count;
++        unsigned frame_count;
++	int r;
++	int lch;
++
++	init_completion(&compl);
++
++        r = omap_request_dma(OMAP_DMA_NO_DEVICE, "VRAM DMA",
++			_omap_vram_dma_cb,
++                        &compl, &lch);
++        if (r) {
++		pr_err("VRAM: request_dma failed for memory clear\n");
++		return -EBUSY;
++	}
++
++        elem_count = pages * PAGE_SIZE / 4;
++        frame_count = 1;
++
++        omap_set_dma_transfer_params(lch, OMAP_DMA_DATA_TYPE_S32,
++                        elem_count, frame_count,
++                        OMAP_DMA_SYNC_ELEMENT,
++                        0, 0);
++
++        omap_set_dma_dest_params(lch, 0, OMAP_DMA_AMODE_POST_INC,
++			paddr, 0, 0);
++
++	omap_set_dma_color_mode(lch, OMAP_DMA_CONSTANT_FILL, 0x000000);
++
++        omap_start_dma(lch);
++
++	if (wait_for_completion_timeout(&compl, msecs_to_jiffies(1000)) == 0) {
++		omap_stop_dma(lch);
++		pr_err("VRAM: dma timeout while clearing memory\n");
++		r = -EIO;
++		goto err;
++	}
++
++	r = 0;
++err:
++	omap_free_dma(lch);
++
++	return r;
++}
++
+ static int _omap_vram_alloc(int mtype, unsigned pages, unsigned long *paddr)
+ {
+ 	struct vram_region *rm;
+@@ -313,6 +368,8 @@ found:
+ 
+ 		*paddr = start;
+ 
++		_omap_vram_clear(start, pages);
++
+ 		return 0;
+ 	}
+ 
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch b/recipes/linux/linux-omap-pm/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch
new file mode 100644
index 0000000000..8c5edd0c3d
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0050-DSS2-OMAPFB-remove-fb-clearing-code.patch
@@ -0,0 +1,53 @@
+From 07482193cccdfe9ede1f47d72790dfbe54343505 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 22 Apr 2009 10:26:06 +0300
+Subject: [PATCH] DSS2: OMAPFB: remove fb clearing code
+
+VRAM manager does the clearing now when the area is allocated.
+---
+ drivers/video/omap2/omapfb/omapfb-main.c |    8 --------
+ 1 files changed, 0 insertions(+), 8 deletions(-)
+
+diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
+index cd63740..76e7c6c 100644
+--- a/drivers/video/omap2/omapfb/omapfb-main.c
++++ b/drivers/video/omap2/omapfb/omapfb-main.c
+@@ -1174,7 +1174,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+ 	struct omapfb2_mem_region *rg;
+ 	void __iomem *vaddr;
+ 	int r;
+-	int clear = 0;
+ 
+ 	rg = &ofbi->region;
+ 	memset(rg, 0, sizeof(*rg));
+@@ -1184,7 +1183,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+ 	if (!paddr) {
+ 		DBG("allocating %lu bytes for fb %d\n", size, ofbi->id);
+ 		r = omap_vram_alloc(OMAPFB_MEMTYPE_SDRAM, size, &paddr);
+-		clear = 1;
+ 	} else {
+ 		DBG("reserving %lu bytes at %lx for fb %d\n", size, paddr,
+ 				ofbi->id);
+@@ -1206,9 +1204,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+ 		}
+ 
+ 		DBG("allocated VRAM paddr %lx, vaddr %p\n", paddr, vaddr);
+-
+-		if (clear)
+-			memset_io(vaddr, 0, size);
+ 	} else {
+ 		void __iomem *va;
+ 
+@@ -1232,9 +1227,6 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
+ 		rg->vrfb.vaddr[0] = va;
+ 
+ 		vaddr = NULL;
+-
+-		if (clear)
+-			memset_io(va, 0, size);
+ 	}
+ 
+ 	rg->paddr = paddr;
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch b/recipes/linux/linux-omap-pm/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch
new file mode 100644
index 0000000000..93ff3205d3
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0051-DSS2-VRAM-use-debugfs-not-procfs.patch
@@ -0,0 +1,170 @@
+From b47aef28536f3c276d232c41cd3084c69389dca4 Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Wed, 22 Apr 2009 14:11:52 +0300
+Subject: [PATCH] DSS2: VRAM: use debugfs, not procfs
+
+---
+ arch/arm/plat-omap/vram.c |  103 +++++++++++++++------------------------------
+ 1 files changed, 34 insertions(+), 69 deletions(-)
+
+diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c
+index 90276ac..e847579 100644
+--- a/arch/arm/plat-omap/vram.c
++++ b/arch/arm/plat-omap/vram.c
+@@ -27,11 +27,11 @@
+ #include <linux/mm.h>
+ #include <linux/list.h>
+ #include <linux/dma-mapping.h>
+-#include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ #include <linux/bootmem.h>
+ #include <linux/omapfb.h>
+ #include <linux/completion.h>
++#include <linux/debugfs.h>
+ 
+ #include <asm/setup.h>
+ 
+@@ -398,88 +398,54 @@ int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr)
+ }
+ EXPORT_SYMBOL(omap_vram_alloc);
+ 
+-#ifdef CONFIG_PROC_FS
+-static void *r_next(struct seq_file *m, void *v, loff_t *pos)
+-{
+-	struct list_head *l = v;
+-
+-	(*pos)++;
+-
+-	if (list_is_last(l, &region_list))
+-		return NULL;
+-
+-	return l->next;
+-}
+-
+-static void *r_start(struct seq_file *m, loff_t *pos)
+-{
+-	loff_t p = *pos;
+-	struct list_head *l = &region_list;
+-
+-	mutex_lock(&region_mutex);
+-
+-	do {
+-		l = l->next;
+-		if (l == &region_list)
+-			return NULL;
+-	} while (p--);
+-
+-	return l;
+-}
+-
+-static void r_stop(struct seq_file *m, void *v)
+-{
+-	mutex_unlock(&region_mutex);
+-}
+-
+-static int r_show(struct seq_file *m, void *v)
++#if defined(CONFIG_DEBUG_FS)
++static int vram_debug_show(struct seq_file *s, void *unused)
+ {
+ 	struct vram_region *vr;
+ 	struct vram_alloc *va;
+ 	unsigned size;
+ 
+-	vr = list_entry(v, struct vram_region, list);
+-
+-	size = vr->pages << PAGE_SHIFT;
+-
+-	seq_printf(m, "%08lx-%08lx (%d bytes)\n",
+-			vr->paddr, vr->paddr + size - 1,
+-			size);
++	mutex_lock(&region_mutex);
+ 
+-	list_for_each_entry(va, &vr->alloc_list, list) {
+-		size = va->pages << PAGE_SHIFT;
+-		seq_printf(m, "    %08lx-%08lx (%d bytes)\n",
+-				va->paddr, va->paddr + size - 1,
++	list_for_each_entry(vr, &region_list, list) {
++		size = vr->pages << PAGE_SHIFT;
++		seq_printf(s, "%08lx-%08lx (%d bytes)\n",
++				vr->paddr, vr->paddr + size - 1,
+ 				size);
+-	}
+ 
++		list_for_each_entry(va, &vr->alloc_list, list) {
++			size = va->pages << PAGE_SHIFT;
++			seq_printf(s, "    %08lx-%08lx (%d bytes)\n",
++					va->paddr, va->paddr + size - 1,
++					size);
++		}
++	}
+ 
++	mutex_unlock(&region_mutex);
+ 
+ 	return 0;
+ }
+ 
+-static const struct seq_operations resource_op = {
+-	.start	= r_start,
+-	.next	= r_next,
+-	.stop	= r_stop,
+-	.show	= r_show,
+-};
+-
+-static int vram_open(struct inode *inode, struct file *file)
++static int vram_debug_open(struct inode *inode, struct file *file)
+ {
+-	return seq_open(file, &resource_op);
++	return single_open(file, vram_debug_show, inode->i_private);
+ }
+ 
+-static const struct file_operations proc_vram_operations = {
+-	.open		= vram_open,
+-	.read		= seq_read,
+-	.llseek		= seq_lseek,
+-	.release	= seq_release,
++static const struct file_operations vram_debug_fops = {
++	.open           = vram_debug_open,
++	.read           = seq_read,
++	.llseek         = seq_lseek,
++	.release        = single_release,
+ };
+ 
+-static int __init omap_vram_create_proc(void)
++static int __init omap_vram_create_debugfs(void)
+ {
+-	proc_create("omap-vram", 0, NULL, &proc_vram_operations);
++	struct dentry *d;
++
++	d = debugfs_create_file("vram", S_IRUGO, NULL,
++			NULL, &vram_debug_fops);
++	if (IS_ERR(d))
++		return PTR_ERR(d);
+ 
+ 	return 0;
+ }
+@@ -487,7 +453,7 @@ static int __init omap_vram_create_proc(void)
+ 
+ static __init int omap_vram_init(void)
+ {
+-	int i, r;
++	int i;
+ 
+ 	vram_initialized = 1;
+ 
+@@ -495,10 +461,9 @@ static __init int omap_vram_init(void)
+ 		omap_vram_add_region(postponed_regions[i].paddr,
+ 				postponed_regions[i].size);
+ 
+-#ifdef CONFIG_PROC_FS
+-	r = omap_vram_create_proc();
+-	if (r)
+-		return -ENOMEM;
++#ifdef CONFIG_DEBUG_FS
++	if (omap_vram_create_debugfs())
++		pr_err("VRAM: Failed to create debugfs file\n");
+ #endif
+ 
+ 	return 0;
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch b/recipes/linux/linux-omap-pm/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch
new file mode 100644
index 0000000000..b8f89b6239
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0052-DSS2-VRAM-fix-section-mismatch-warning.patch
@@ -0,0 +1,34 @@
+From 635fa66abe6e502c9b78b1dc66757bf67fd163e1 Mon Sep 17 00:00:00 2001
+From: Imre Deak <imre.deak@nokia.com>
+Date: Wed, 22 Apr 2009 14:40:48 +0200
+Subject: [PATCH] DSS2: VRAM: fix section mismatch warning
+
+postponed_regions are accessed from the non __init
+omap_vram_add_region().
+
+Signed-off-by: Imre Deak <imre.deak@nokia.com>
+---
+ arch/arm/plat-omap/vram.c |    4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/plat-omap/vram.c b/arch/arm/plat-omap/vram.c
+index e847579..b126a64 100644
+--- a/arch/arm/plat-omap/vram.c
++++ b/arch/arm/plat-omap/vram.c
+@@ -63,11 +63,11 @@
+ #define MAX_POSTPONED_REGIONS 10
+ 
+ static bool vram_initialized;
+-static int postponed_cnt __initdata;
++static int postponed_cnt;
+ static struct {
+ 	unsigned long paddr;
+ 	size_t size;
+-} postponed_regions[MAX_POSTPONED_REGIONS] __initdata;
++} postponed_regions[MAX_POSTPONED_REGIONS];
+ 
+ struct vram_alloc {
+ 	struct list_head list;
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch b/recipes/linux/linux-omap-pm/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch
new file mode 100644
index 0000000000..f591fb700a
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/0053-DSS2-disable-LCD-DIGIT-before-resetting-DSS.patch
@@ -0,0 +1,41 @@
+From c7ce3c5e9f7e28900b8ea9c3e1afe41dcdc0863d Mon Sep 17 00:00:00 2001
+From: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+Date: Thu, 23 Apr 2009 10:46:53 +0300
+Subject: [PATCH] DSS2: disable LCD & DIGIT before resetting DSS
+
+This seems to fix the synclost problem that we get, if the bootloader
+starts the DSS and the kernel resets it.
+---
+ drivers/video/omap2/dss/dss.c |    8 +++++---
+ 1 files changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
+index adc1f34..aab9758 100644
+--- a/drivers/video/omap2/dss/dss.c
++++ b/drivers/video/omap2/dss/dss.c
+@@ -285,6 +285,11 @@ int dss_init(bool skip_init)
+ 	}
+ 
+ 	if (!skip_init) {
++		/* disable LCD and DIGIT output. This seems to fix the synclost
++		 * problem that we get, if the bootloader starts the DSS and
++		 * the kernel resets it */
++		omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
++
+ 		/* We need to wait here a bit, otherwise we sometimes start to
+ 		 * get synclost errors, and after that only power cycle will
+ 		 * restore DSS functionality. I have no idea why this happens.
+@@ -294,10 +299,7 @@ int dss_init(bool skip_init)
+ 		msleep(50);
+ 
+ 		_omap_dss_reset();
+-
+ 	}
+-	else
+-		printk("DSS SKIP RESET\n");
+ 
+ 	/* autoidle */
+ 	REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
+-- 
+1.5.6.5
+
diff --git a/recipes/linux/linux-omap-pm/dss2/merge-fixups.diff b/recipes/linux/linux-omap-pm/dss2/merge-fixups.diff
new file mode 100644
index 0000000000..94e663ce9e
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/dss2/merge-fixups.diff
@@ -0,0 +1,49 @@
+
+--- /tmp/io.c	2009-04-23 12:31:45.000000000 +0200
++++ git/arch/arm/mach-omap2/io.c	2009-04-23 12:32:35.000000000 +0200
+@@ -18,6 +18,7 @@
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/init.h>
++#include <linux/omapfb.h>
+ #include <linux/io.h>
+ #include <linux/clk.h>
+ 
+@@ -25,7 +26,6 @@
+ 
+ #include <asm/mach/map.h>
+ #include <mach/mux.h>
+-#include <mach/omapfb.h>
+ #include <mach/sram.h>
+ #include <mach/sdrc.h>
+ #include <mach/gpmc.h>
+--- /tmp/board-3430sdp.c	2009-04-23 12:31:45.000000000 +0200
++++ git/arch/arm/mach-omap2/board-3430sdp.c	2009-04-23 12:32:51.000000000 +0200
+@@ -38,6 +38,7 @@
+ #include <mach/dma.h>
+ #include <mach/gpmc.h>
+ #include <mach/omap-pm.h>
++#include <mach/display.h>
+ 
+ #include <mach/control.h>
+ #include <mach/clock.h>
+--- /tmp/board-omap3beagle.c	2009-04-23 12:31:45.000000000 +0200
++++ git/arch/arm/mach-omap2/board-omap3beagle.c	2009-04-23 12:33:07.000000000 +0200
+@@ -46,6 +46,7 @@
+ #include <mach/mux.h>
+ #include <mach/omap-pm.h>
+ #include <mach/clock.h>
++#include <mach/display.h>
+ 
+ #include "twl4030-generic-scripts.h"
+ #include "mmc-twl4030.h"
+--- /tmp/board-omap3evm.c	2009-04-23 12:31:45.000000000 +0200
++++ git/arch/arm/mach-omap2/board-omap3evm.c	2009-04-23 12:33:22.000000000 +0200
+@@ -38,6 +38,7 @@
+ #include <mach/mcspi.h>
+ #include <mach/omap-pm.h>
+ #include <mach/clock.h>
++#include <mach/display.h>
+ 
+ #include "sdram-micron-mt46h32m32lf-6.h"
+ #include "twl4030-generic-scripts.h"
diff --git a/recipes/linux/linux-omap-pm/dvb-fix-dma.diff b/recipes/linux/linux-omap-pm/dvb-fix-dma.diff
deleted file mode 100644
index e05473fc7f..0000000000
--- a/recipes/linux/linux-omap-pm/dvb-fix-dma.diff
+++ /dev/null
@@ -1,60 +0,0 @@
-Hi,
-I post this patch that fixes a kernel crash that happens when using a dvb
-usb stick on a mips platform and I think even on other platforms on which
-the dma access in not cache-coherent.
-
-The problem's origin is that, inside the method usb_bulk_urb_init of file
-drivers/media/dvb/dvb-usb/usb-urb.c, stream->urb_list[i]->transfer_buffer
-points to a memory area that has been allocated to be dma-coherent but
-stream->urb_list[i]->transfer_flags doesn't include the
-URB_NO_TRANSFER_DMA_MAP flag and stream->urb_list[i]->transfer_dma is not
-set.
-When later on the stream->urb_list[i]->transfer_buffer pointer is used
-inside function usb_hcd_submit_urb of file drivers/usb/core/hcd.c since the
-flag URB_NO_TRANSFER_DMA_MAP is not set the urb->transfer_buffer pointer is
-passed to the dma_map_single function that since the address is dma-coherent
-returns a wrong tranfer_dma address that later on leads to the kernel crash.
-
-The problem is solved by setting the URB_NO_TRANSFER_DMA_MAP flag and the
-stream->urb_list[i]->transfer_dma address.
-
-Perhaps to be more safe the URB_NO_TRANSFER_DMA_MAP flag can be set only
-if stream->urb_list[i]->transfer_dma != 0.
-
-I don't know if half of the fault can be of the dma_map_single function that
-should anyway returns a valid address both for a not dma-coherent and a
-dma-coherent address.
-
-Just to be clear:
-I've done this patch to solve my problem and I tested it only on a mips 
-platform
-but I think it should not cause any problems on other platforms.
-I posted it here to help someone else that can have my same problem and to 
-point it out
-to the mantainer of this part of code.
-You can use it at your own risk and I'm not resposible in any way for any 
-problem or
-damage that it can cause.
-I'm available to discuss about it
-
-Bye
-
-Michele Scorcia
-
---------------------
-
-
-
-
---- /tmp/usb-urb.c	2008-10-08 09:53:23.000000000 +0200
-+++ git/drivers/media/dvb/dvb-usb/usb-urb.c	2008-10-08 09:54:16.000000000 +0200
-@@ -152,7 +152,8 @@
- 				stream->props.u.bulk.buffersize,
- 				usb_urb_complete, stream);
- 
--		stream->urb_list[i]->transfer_flags = 0;
-+		stream->urb_list[i]->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
-+		stream->urb_list[i]->transfer_dma = stream->dma_addr[i];	
- 		stream->urbs_initialized++;
- 	}
- 	return 0;
diff --git a/recipes/linux/linux-omap-pm/ehci.patch b/recipes/linux/linux-omap-pm/ehci.patch
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/ehci.patch
diff --git a/recipes/linux/linux-omap-pm/fix-clkrate-programming.diff b/recipes/linux/linux-omap-pm/fix-clkrate-programming.diff
deleted file mode 100644
index 10369d4200..0000000000
--- a/recipes/linux/linux-omap-pm/fix-clkrate-programming.diff
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Paul Walmsley <paul@pwsan.com>
-Date: Fri, 17 Oct 2008 22:18:42 +0000 (-0600)
-Subject: OMAP3 clock: fix non-CORE DPLL rate assignment bugs
-X-Git-Tag: v2.6.27-omap1~8
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftmlind%2Flinux-omap-2.6.git;a=commitdiff_plain;h=2ac1da8c787f73f067e717408e631501ba60aabc
-
-OMAP3 clock: fix non-CORE DPLL rate assignment bugs
-
-Commit 8b1f0bd44fe490ec631230c8c040753a2bda8caa introduced a bug that
-caused non-CORE DPLL rates to be incorrectly set on boot in
-omap3_noncore_dpll_enable().  Debugged by Tomi Valkeinen
-<tomi.valkeinen@nokia.com> - thanks Tomi.
-
-Also fix omap3_noncore_dpll_set_rate() to assign clk->rate after a
-DPLL reprogram.
-
-Tested on 3430SDP.
-
-Signed-off-by: Paul Walmsley <paul@pwsan.com>
-Cc: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Cc: Rick Bronson <rick@efn.org>
-Cc: Timo Kokkonen <timo.t.kokkonen@nokia.com>
-Cc: Sakari Poussa <sakari.poussa@nokia.com>
-Signed-off-by: Tony Lindgren <tony@atomide.com>
----
-
-diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
-index df258f7..cc43f4f 100644
---- a/arch/arm/mach-omap2/clock34xx.c
-+++ b/arch/arm/mach-omap2/clock34xx.c
-@@ -271,7 +271,6 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
- static int omap3_noncore_dpll_enable(struct clk *clk)
- {
- 	int r;
--	long rate;
- 	struct dpll_data *dd;
- 
- 	if (clk == &dpll3_ck)
-@@ -287,7 +286,7 @@ static int omap3_noncore_dpll_enable(struct clk *clk)
- 		r = _omap3_noncore_dpll_lock(clk);
- 
- 	if (!r)
--		clk->rate = rate;
-+		clk->rate = omap2_get_dpll_rate(clk);
- 
- 	return r;
- }
-@@ -430,6 +429,9 @@ static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
- 		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
- 						 dd->last_rounded_n, freqsel);
- 
-+		if (!ret)
-+			clk->rate = rate;
-+
- 	}
- 
- 	omap3_dpll_recalc(clk);
diff --git a/recipes/linux/linux-omap-pm/fix-dpll-m4.diff b/recipes/linux/linux-omap-pm/fix-dpll-m4.diff
deleted file mode 100644
index 1fa3bfe7fe..0000000000
--- a/recipes/linux/linux-omap-pm/fix-dpll-m4.diff
+++ /dev/null
@@ -1,37 +0,0 @@
-From linux-omap-owner@vger.kernel.org Mon Dec 08 14:41:05 2008
-
-This fixes commit e42218d45afbc3e654e289e021e6b80c657b16c2. The commit
-was based on old kernel tree, and with bad luck applied ok but to wrong
-position, modifying dpll4_m6_ck instead of dpll4_m4_ck.
-
-Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
----
- arch/arm/mach-omap2/clock34xx.h |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
-index 1c2b49f..5357507 100644
---- a/arch/arm/mach-omap2/clock34xx.h
-+++ b/arch/arm/mach-omap2/clock34xx.h
-@@ -825,6 +825,8 @@ static struct clk dpll4_m4_ck = {
- 				PARENT_CONTROLS_CLOCK,
- 	.clkdm		= { .name = "dpll4_clkdm" },
- 	.recalc		= &omap2_clksel_recalc,
-+	.set_rate	= &omap2_clksel_set_rate,
-+	.round_rate	= &omap2_clksel_round_rate,
- };
- 
- /* The PWRDN bit is apparently only available on 3430ES2 and above */
-@@ -879,8 +881,6 @@ static struct clk dpll4_m6_ck = {
- 				PARENT_CONTROLS_CLOCK,
- 	.clkdm		= { .name = "dpll4_clkdm" },
- 	.recalc		= &omap2_clksel_recalc,
--	.set_rate	= &omap2_clksel_set_rate,
--	.round_rate	= &omap2_clksel_round_rate,
- };
- 
- /* The PWRDN bit is apparently only available on 3430ES2 and above */
--- 
-1.6.0.3
-
-
diff --git a/recipes/linux/linux-omap-pm/fix-irq33.diff b/recipes/linux/linux-omap-pm/fix-irq33.diff
deleted file mode 100644
index 709f042ab7..0000000000
--- a/recipes/linux/linux-omap-pm/fix-irq33.diff
+++ /dev/null
@@ -1,111 +0,0 @@
-From: "Nathan Monson" <nmonson@gmail.com>
-To: "linux-omap@vger.kernel.org List" <linux-omap@vger.kernel.org>
-Subject: Re: omapfb: help from userspace
-Cc: "TK, Pratheesh Gangadhar" <pratheesh@ti.com>
-
-On Wed, Oct 8, 2008 at 11:36 AM, Nathan Monson <nmonson@gmail.com> wrote:
-> "Felipe Contreras" <felipe.contreras@gmail.com> writes:
->> irq -33, desc: c0335cf8, depth: 0, count: 0, unhandled: 0
->
-> On the BeagleBoard list, Pratheesh Gangadhar said that mapping I/O
-> regions as Strongly Ordered suppresses this problem:
-> http://groups.google.com/group/beagleboard/browse_thread/thread/23e1c95b4bfb09b5/70d12dca569ca503?show_docid=70d12dca569ca503
-
-Pratheesh helped me make a patch against the latest linux-omap git to
-try this.
-
-With this patch, my IRQ -33 problems with the DSP have disappeared.
-Before, I would end up in IRQ -33 loop after 10 invocations of the DSP
-Bridge 'ping.out' utility.  I just finished running it 50,000 times
-without error.
-
-As stated before, this patch is just a workaround for testing
-purposes, not a fix.  Who knows what performance side effects it
-has...
-
----
-diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
-index 9eb936e..5cb4f5f 100644
---- a/arch/arm/include/asm/mach/map.h
-+++ b/arch/arm/include/asm/mach/map.h
-@@ -25,6 +25,7 @@ struct map_desc {
- #define MT_HIGH_VECTORS		8
- #define MT_MEMORY		9
- #define MT_ROM			10
-+#define MT_MEMORY_SO		11
-
- #define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
- #define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
-diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
-index adbe21f..c11c0e8 100644
---- a/arch/arm/mach-omap2/io.c
-+++ b/arch/arm/mach-omap2/io.c
-@@ -119,13 +119,13 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
- 		.virtual	= L3_34XX_VIRT,
- 		.pfn		= __phys_to_pfn(L3_34XX_PHYS),
- 		.length		= L3_34XX_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_MEMORY_SO
- 	},
- 	{
- 		.virtual	= L4_34XX_VIRT,
- 		.pfn		= __phys_to_pfn(L4_34XX_PHYS),
- 		.length		= L4_34XX_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_MEMORY_SO
- 	},
- 	{
- 		.virtual	= L4_WK_34XX_VIRT,
-@@ -137,19 +137,19 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
- 		.virtual	= OMAP34XX_GPMC_VIRT,
- 		.pfn		= __phys_to_pfn(OMAP34XX_GPMC_PHYS),
- 		.length		= OMAP34XX_GPMC_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_MEMORY_SO
- 	},
- 	{
- 		.virtual	= OMAP343X_SMS_VIRT,
- 		.pfn		= __phys_to_pfn(OMAP343X_SMS_PHYS),
- 		.length		= OMAP343X_SMS_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_MEMORY_SO
- 	},
- 	{
- 		.virtual	= OMAP343X_SDRC_VIRT,
- 		.pfn		= __phys_to_pfn(OMAP343X_SDRC_PHYS),
- 		.length		= OMAP343X_SDRC_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_MEMORY_SO
- 	},
- 	{
- 		.virtual	= L4_PER_34XX_VIRT,
-@@ -161,7 +161,7 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
- 		.virtual	= L4_EMU_34XX_VIRT,
- 		.pfn		= __phys_to_pfn(L4_EMU_34XX_PHYS),
- 		.length		= L4_EMU_34XX_SIZE,
--		.type		= MT_DEVICE
-+		.type		= MT_MEMORY_SO
- 	},
- };
- #endif
-diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
-index a713e40..d5f25ad 100644
---- a/arch/arm/mm/mmu.c
-+++ b/arch/arm/mm/mmu.c
-@@ -245,6 +245,10 @@ static struct mem_type mem_types[] = {
- 		.prot_sect = PMD_TYPE_SECT,
- 		.domain    = DOMAIN_KERNEL,
- 	},
-+	[MT_MEMORY_SO] = {
-+		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_UNCACHED,
-+		.domain    = DOMAIN_KERNEL,
-+	},
- };
-
- const struct mem_type *get_mem_type(unsigned int type)
---
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
-
diff --git a/recipes/linux/linux-omap-pm/fixup-evm-cpufreq.diff b/recipes/linux/linux-omap-pm/fixup-evm-cpufreq.diff
deleted file mode 100644
index fda1b6ddd9..0000000000
--- a/recipes/linux/linux-omap-pm/fixup-evm-cpufreq.diff
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Kevin Hilman <khilman@deeprootsystems.com>
-Date: Mon, 2 Mar 2009 21:57:31 +0000 (-0800)
-Subject: OMAP3: PM: CPUfreq support for OMAP3EVM board
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fkhilman%2Flinux-omap-pm.git;a=commitdiff_plain;h=e10fda5f6106c6e0a559c3a4720ebff7a8bb1a43
-
-OMAP3: PM: CPUfreq support for OMAP3EVM board
-
-From: Koen Kooi <koen@beagleboard.org>
-
-Uses the common OMAP3 OPP settings on OMAP3 EVM board.
-
-Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
----
-
-diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
-index 6fbbe95..072930a 100644
---- a/arch/arm/mach-omap2/board-omap3evm.c
-+++ b/arch/arm/mach-omap2/board-omap3evm.c
-@@ -36,14 +36,11 @@
- #include <mach/usb-ehci.h>
- #include <mach/common.h>
- #include <mach/mcspi.h>
--#include <mach/omap-pm.h>
--#include <mach/clock.h>
- 
- #include "sdram-micron-mt46h32m32lf-6.h"
- #include "twl4030-generic-scripts.h"
- #include "mmc-twl4030.h"
--#include "pm.h"
--#include "omap3-opp.h"
-+
- 
- static struct resource omap3evm_smc911x_resources[] = {
- 	[0] =	{
-@@ -220,8 +217,7 @@ struct spi_board_info omap3evm_spi_board_info[] = {
- 
- static void __init omap3_evm_init_irq(void)
- {
--	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table,
--	                     omap3_dsp_rate_table, omap3_l3_rate_table);
-+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL, NULL, NULL);
- 	omap_init_irq();
- 	omap_gpio_init();
- 	omap3evm_init_smc911x();
diff --git a/recipes/linux/linux-omap-pm/ioremap-fix.patch b/recipes/linux/linux-omap-pm/ioremap-fix.patch
deleted file mode 100644
index 406138b04d..0000000000
--- a/recipes/linux/linux-omap-pm/ioremap-fix.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From: Russell King <rmk@dyn-67.arm.linux.org.uk>
-Date: Sun, 25 Jan 2009 17:36:34 +0000 (+0000)
-Subject: [ARM] fix section-based ioremap
-X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fkhilman%2Flinux-omap-pm.git;a=commitdiff_plain;h=9ae635f00a568cf95dbd15fa2c50eaee0aa27d2a
-
-[ARM] fix section-based ioremap
-
-Tomi Valkeinen reports:
-  Running with latest linux-omap kernel on OMAP3 SDP board, I have
-  problem with iounmap(). It looks like iounmap() does not properly
-  free large areas. Below is a test which fails for me in 6-7 loops.
-
-	for (i = 0; i < 200; ++i) {
-		vaddr = ioremap(paddr, size);
-		if (!vaddr) {
-			printk("couldn't ioremap\n");
-			break;
-		}
-		iounmap(vaddr);
-	}
-
-The changes to vmalloc.c weren't reflected in the ARM ioremap
-implementation.  Turns out the fix is rather simple.
-
-Tested-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
-Tested-by: Matt Gerassimoff <mgeras@gmail.com>
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-(cherry picked from commit 24f11ec001920f1cfaeeed8e8b55725d900bbb56)
----
-
-diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
-index 18373f7..9f88dd3 100644
---- a/arch/arm/mm/ioremap.c
-+++ b/arch/arm/mm/ioremap.c
-@@ -138,7 +138,7 @@ void __check_kvm_seq(struct mm_struct *mm)
-  */
- static void unmap_area_sections(unsigned long virt, unsigned long size)
- {
--	unsigned long addr = virt, end = virt + (size & ~SZ_1M);
-+	unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
- 	pgd_t *pgd;
- 
- 	flush_cache_vunmap(addr, end);
-@@ -337,10 +337,7 @@ void __iounmap(volatile void __iomem *io_addr)
- 	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
- #ifndef CONFIG_SMP
- 	struct vm_struct **p, *tmp;
--#endif
--	unsigned int section_mapping = 0;
- 
--#ifndef CONFIG_SMP
- 	/*
- 	 * If this is a section based mapping we need to handle it
- 	 * specially as the VM subsystem does not know how to handle
-@@ -352,11 +349,8 @@ void __iounmap(volatile void __iomem *io_addr)
- 	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
- 		if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
- 			if (tmp->flags & VM_ARM_SECTION_MAPPING) {
--				*p = tmp->next;
- 				unmap_area_sections((unsigned long)tmp->addr,
- 						    tmp->size);
--				kfree(tmp);
--				section_mapping = 1;
- 			}
- 			break;
- 		}
-@@ -364,7 +358,6 @@ void __iounmap(volatile void __iomem *io_addr)
- 	write_unlock(&vmlist_lock);
- #endif
- 
--	if (!section_mapping)
--		vunmap(addr);
-+	vunmap(addr);
- }
- EXPORT_SYMBOL(__iounmap);
diff --git a/recipes/linux/linux-omap-pm/mru-256MB.diff b/recipes/linux/linux-omap-pm/mru-256MB.diff
deleted file mode 100644
index 0492ca2d8f..0000000000
--- a/recipes/linux/linux-omap-pm/mru-256MB.diff
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Mans Rullgard <mans@mansr.com>
-Date: Thu, 2 Oct 2008 00:05:33 +0000 (+0100)
-Subject: OMAP: Increase VMALLOC_END to allow 256MB RAM
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=355a0ce968e4a7b0c8d8203f4517296e932e373d
-
-OMAP: Increase VMALLOC_END to allow 256MB RAM
-
-This increases VMALLOC_END to 0x18000000, making room for 256MB
-RAM with the default 128MB vmalloc region.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
-index d8515cb..b97dfaf 100644
---- a/arch/arm/plat-omap/include/mach/vmalloc.h
-+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
-@@ -17,5 +17,5 @@
-  * along with this program; if not, write to the Free Software
-  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-  */
--#define VMALLOC_END	  (PAGE_OFFSET + 0x17000000)
-+#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
- 
diff --git a/recipes/linux/linux-omap-pm/mru-enable-overlay-optimalization.diff b/recipes/linux/linux-omap-pm/mru-enable-overlay-optimalization.diff
deleted file mode 100644
index d027c53d6b..0000000000
--- a/recipes/linux/linux-omap-pm/mru-enable-overlay-optimalization.diff
+++ /dev/null
@@ -1,117 +0,0 @@
-From: Mans Rullgard <mans@mansr.com>
-Date: Fri, 29 Aug 2008 01:45:26 +0000 (+0100)
-Subject: OMAP: Enable overlay optimisation
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=7e052af7e4c73dc450412486ad37eb529e725dc7
-
-OMAP: Enable overlay optimisation
-
-This enables the overlay optimisation feature when the video
-overlay is active. This reduces memory bandwidth used by the
-display subsystem, improving overall performance.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
-index 888d2c2..0f0b2e5 100644
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -315,6 +315,60 @@ void omap_dispc_enable_digit_out(int enable)
- }
- EXPORT_SYMBOL(omap_dispc_enable_digit_out);
- 
-+#define MIN(a, b) ((a)<(b)?(a):(b))
-+#define MAX(a, b) ((a)>(b)?(a):(b))
-+
-+static void setup_overlay_opt(void)
-+{
-+	struct fb_info **fbi = dispc.fbdev->fb_info;
-+	struct omapfb_plane_struct *gfx, *vid;
-+	struct fb_var_screeninfo *gvar;
-+	unsigned gx, gx2, gy, gy2, gw, gh;
-+	unsigned vx, vx2, vy, vy2, vw, vh;
-+	unsigned bpp, skip;
-+	static unsigned last_skip;
-+
-+	if (!fbi[0] || !fbi[1])
-+		return;
-+
-+	gfx = fbi[0]->par;
-+	vid = fbi[1]->par;
-+	gvar = &fbi[0]->var;
-+
-+	gx = gfx->info.pos_x;
-+	gy = gfx->info.pos_y;
-+	gw = gfx->info.out_width;
-+	gh = gfx->info.out_height;
-+	vx = vid->info.pos_x;
-+	vy = vid->info.pos_y;
-+	vw = vid->info.out_width;
-+	vh = vid->info.out_height;
-+	gx2 = gx + gw;
-+	gy2 = gy + gh;
-+	vx2 = vx + vw;
-+	vy2 = vy + vh;
-+	bpp = gvar->bits_per_pixel / 8;
-+
-+	if (!gfx->info.enabled || !vid->info.enabled ||
-+	    dispc.color_key.key_type != OMAPFB_COLOR_KEY_DISABLED) {
-+		skip = 0;
-+	} else if (vx <= gx && vx2 >= gx2) {
-+		unsigned y = MIN(gy2, vy2) - MAX(gy, vy);
-+		skip = y * gvar->xres_virtual * bpp;
-+	} else if (vx <= gx || vx2 >= gx2) {
-+		unsigned x = MIN(gx2, vx2) - MAX(gx, vx);
-+		skip = x * bpp;
-+	} else {
-+		skip = vw * bpp + 1;
-+	}
-+
-+	if (skip != last_skip) {
-+		last_skip = skip;
-+		dispc_write_reg(DISPC_GFX_WINDOW_SKIP, skip);
-+		MOD_REG_FLD(DISPC_CONTROL, 1<<12, !!skip<<12);
-+	}
-+}
-+
- static inline int _setup_plane(int plane, int channel_out,
- 				  u32 paddr, int screen_width,
- 				  int pos_x, int pos_y, int width, int height,
-@@ -437,6 +491,9 @@ static inline int _setup_plane(int plane, int channel_out,
- 
- 	dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
- 
-+	if (plane < 2)
-+		setup_overlay_opt();
-+
- 	MOD_REG_FLD(DISPC_CONTROL, 1<<5, 1<<5);
- 
- 	return height * screen_width * bpp / 8;
-@@ -585,11 +642,19 @@ static int omap_dispc_enable_plane(int plane, int enable)
- 	const u32 at_reg[] = { DISPC_GFX_ATTRIBUTES,
- 				DISPC_VID1_BASE + DISPC_VID_ATTRIBUTES,
- 				DISPC_VID2_BASE + DISPC_VID_ATTRIBUTES };
-+	struct omapfb_plane_struct *pi;
-+
- 	if ((unsigned int)plane > dispc.mem_desc.region_cnt)
- 		return -EINVAL;
- 
-+	pi = dispc.fbdev->fb_info[plane]->par;
-+	pi->info.enabled = enable;
-+
- 	enable_lcd_clocks(1);
- 	MOD_REG_FLD(at_reg[plane], 1, enable ? 1 : 0);
-+	if (plane < 2)
-+		setup_overlay_opt();
-+	MOD_REG_FLD(DISPC_CONTROL, 1<<5, 1<<5);
- 	enable_lcd_clocks(0);
- 
- 	return 0;
-@@ -633,6 +698,7 @@ static int omap_dispc_set_color_key(struct omapfb_color_key *ck)
- 	if (val != 0)
- 		dispc_write_reg(tr_reg, ck->trans_key);
- 	dispc_write_reg(df_reg, ck->background);
-+	setup_overlay_opt();
- 	enable_lcd_clocks(0);
- 
- 	dispc.color_key = *ck;
diff --git a/recipes/linux/linux-omap-pm/mru-fix-display-panning.diff b/recipes/linux/linux-omap-pm/mru-fix-display-panning.diff
deleted file mode 100644
index a4ba3d29f4..0000000000
--- a/recipes/linux/linux-omap-pm/mru-fix-display-panning.diff
+++ /dev/null
@@ -1,49 +0,0 @@
-From: Mans Rullgard <mans@mansr.com>
-Date: Fri, 29 Aug 2008 01:18:48 +0000 (+0100)
-Subject: OMAP: Fix omapfb display panning
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=2ea46e9f28ff57a32d87bc380457a584c913fe78
-
-OMAP: Fix omapfb display panning
-
-This makes the FBIOPAN_DISPLAY ioctl work with omapfb.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
-index ce4c4de..64bf333 100644
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -436,6 +436,8 @@ static inline int _setup_plane(int plane, int channel_out,
- 
- 	dispc_write_reg(ri_reg[plane], (screen_width - width) * bpp / 8 + 1);
- 
-+	MOD_REG_FLD(DISPC_CONTROL, 1<<5, 1<<5);
-+
- 	return height * screen_width * bpp / 8;
- }
- 
-diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
-index e7f3462..e9ffb92 100644
---- a/drivers/video/omap/omapfb_main.c
-+++ b/drivers/video/omap/omapfb_main.c
-@@ -207,8 +207,8 @@ static int ctrl_change_mode(struct fb_info *fbi)
- 	struct omapfb_device *fbdev = plane->fbdev;
- 	struct fb_var_screeninfo *var = &fbi->var;
- 
--	offset = var->yoffset * fbi->fix.line_length +
--		 var->xoffset * var->bits_per_pixel / 8;
-+	offset = (var->yoffset * var->xres_virtual + var->xoffset) *
-+		var->bits_per_pixel / 8;
- 
- 	if (fbdev->ctrl->sync)
- 		fbdev->ctrl->sync();
-@@ -426,6 +426,8 @@ static void set_fb_fix(struct fb_info *fbi)
- 	}
- 	fix->accel		= FB_ACCEL_OMAP1610;
- 	fix->line_length	= var->xres_virtual * bpp / 8;
-+	fix->xpanstep		= 1;
-+	fix->ypanstep		= 1;
- }
- 
- static int set_color_mode(struct omapfb_plane_struct *plane,
diff --git a/recipes/linux/linux-omap-pm/mru-fix-timings.diff b/recipes/linux/linux-omap-pm/mru-fix-timings.diff
deleted file mode 100644
index 37ca7d33ac..0000000000
--- a/recipes/linux/linux-omap-pm/mru-fix-timings.diff
+++ /dev/null
@@ -1,26 +0,0 @@
-From: Mans Rullgard <mans@mansr.com>
-Date: Fri, 29 Aug 2008 01:16:14 +0000 (+0100)
-Subject: OMAP: Fix video timings info message
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=3a8bdf0967ae2c4eb3cebb97118ef0392f709c1c
-
-OMAP: Fix video timings info message
-
-This fixes the hsync frequency value printed on startup.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
-index d176a2c..e7f3462 100644
---- a/drivers/video/omap/omapfb_main.c
-+++ b/drivers/video/omap/omapfb_main.c
-@@ -1792,7 +1792,8 @@ static int omapfb_do_probe(struct platform_device *pdev,
- 			vram, fbdev->mem_desc.region_cnt);
- 	pr_info("omapfb: Pixclock %lu kHz hfreq %lu.%lu kHz "
- 			"vfreq %lu.%lu Hz\n",
--			phz / 1000, hhz / 10000, hhz % 10, vhz / 10, vhz % 10);
-+			phz / 1000, hhz / 10000, hhz % 10000,
-+			vhz / 10, vhz % 10);
- 
- 	return 0;
- 
diff --git a/recipes/linux/linux-omap-pm/mru-improve-pixclock-config.diff b/recipes/linux/linux-omap-pm/mru-improve-pixclock-config.diff
deleted file mode 100644
index 5a702128f2..0000000000
--- a/recipes/linux/linux-omap-pm/mru-improve-pixclock-config.diff
+++ /dev/null
@@ -1,93 +0,0 @@
-From: Mans Rullgard <mans@mansr.com>
-Date: Fri, 29 Aug 2008 01:34:39 +0000 (+0100)
-Subject: OMAP: Improve pixel clock configuration
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=01c2d720e59c291de9eb21eb65225f2f215fef84
-
-OMAP: Improve pixel clock configuration
-
-This sets the DSS1_ALWON_FCLK clock as close as possible to a
-multiple of the requested pixel clock, while keeping it below
-the 173MHz limit.
-
-Due to of the structure of the clock tree, dss1_alwon_fck cannot
-be set directly, and we must use dpll4_m4_ck instead.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
-index 64bf333..888d2c2 100644
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -177,6 +177,7 @@ static struct {
- 
- 	struct clk	*dss_ick, *dss1_fck;
- 	struct clk	*dss_54m_fck;
-+	struct clk	*dpll4_m4_ck;
- 
- 	enum omapfb_update_mode	update_mode;
- 	struct omapfb_device	*fbdev;
-@@ -736,19 +737,34 @@ static void setup_color_conv_coef(void)
- 	MOD_REG_FLD(at2_reg, (1 << 11), ct->full_range);
- }
- 
-+#define MAX_FCK 173000000
-+
- static void calc_ck_div(int is_tft, int pck, int *lck_div, int *pck_div)
- {
-+	unsigned long prate = clk_get_rate(clk_get_parent(dispc.dpll4_m4_ck));
-+	unsigned long pcd_min = is_tft? 2: 3;
-+	unsigned long fck_div;
- 	unsigned long fck, lck;
- 
--	*lck_div = 1;
- 	pck = max(1, pck);
-+
-+	if (pck * pcd_min > MAX_FCK) {
-+		dev_warn(dispc.fbdev->dev, "pixclock %d kHz too high.\n",
-+			 pck / 1000);
-+		pck = MAX_FCK / pcd_min;
-+	}
-+
-+	fck = pck * 2;
-+	fck_div = (prate + pck) / fck;
-+	if (fck_div > 16)
-+		fck_div /= (fck_div + 15) / 16;
-+	if (fck_div < 1)
-+		fck_div = 1;
-+	clk_set_rate(dispc.dpll4_m4_ck, prate / fck_div);
- 	fck = clk_get_rate(dispc.dss1_fck);
--	lck = fck;
--	*pck_div = (lck + pck - 1) / pck;
--	if (is_tft)
--		*pck_div = max(2, *pck_div);
--	else
--		*pck_div = max(3, *pck_div);
-+
-+	*lck_div = 1;
-+	*pck_div = (fck + pck - 1) / pck;
- 	if (*pck_div > 255) {
- 		*pck_div = 255;
- 		lck = pck * *pck_div;
-@@ -909,11 +925,21 @@ static int get_dss_clocks(void)
- 		return PTR_ERR(dispc.dss_54m_fck);
- 	}
- 
-+	if (IS_ERR((dispc.dpll4_m4_ck =
-+				clk_get(dispc.fbdev->dev, "dpll4_m4_ck")))) {
-+		dev_err(dispc.fbdev->dev, "can't get dpll4_m4_ck");
-+		clk_put(dispc.dss_ick);
-+		clk_put(dispc.dss1_fck);
-+		clk_put(dispc.dss_54m_fck);
-+		return PTR_ERR(dispc.dss_54m_fck);
-+	}
-+
- 	return 0;
- }
- 
- static void put_dss_clocks(void)
- {
-+	clk_put(dispc.dpll4_m4_ck);
- 	clk_put(dispc.dss_54m_fck);
- 	clk_put(dispc.dss1_fck);
- 	clk_put(dispc.dss_ick);
diff --git a/recipes/linux/linux-omap-pm/mru-make-video-timings-selectable.diff b/recipes/linux/linux-omap-pm/mru-make-video-timings-selectable.diff
deleted file mode 100644
index bba3ef72cc..0000000000
--- a/recipes/linux/linux-omap-pm/mru-make-video-timings-selectable.diff
+++ /dev/null
@@ -1,312 +0,0 @@
-From: Mans Rullgard <mans@mansr.com>
-Date: Fri, 29 Aug 2008 01:42:12 +0000 (+0100)
-Subject: OMAP: Make video mode selectable from pre-defined list
-X-Git-Url: http://git.mansr.com/?p=linux-omap;a=commitdiff_plain;h=7a9e55d7156dae6bc930c77620a88a669d2ed1c9
-
-OMAP: Make video mode selectable from pre-defined list
-
-This adds a list of common video modes and allows one to be
-selected with video=omapfb:mode:name on the command line,
-overriding the defaults from lcd_*.c. A default named mode
-can also be specified in the kernel configuration.
-
-Signed-off-by: Mans Rullgard <mans@mansr.com>
----
-
-diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
-index 5ebd591..9977e80 100644
---- a/drivers/video/omap/Kconfig
-+++ b/drivers/video/omap/Kconfig
-@@ -7,26 +7,13 @@ config FB_OMAP
- 	help
-           Frame buffer driver for OMAP based boards.
- 
--choice
--	depends on FB_OMAP && MACH_OVERO
--	prompt "Screen resolution"
--	default FB_OMAP_079M3R
-+config FB_OMAP_VIDEO_MODE
-+	string "Default video mode"
-+	depends on FB_OMAP
- 	help
--	  Selected desired screen resolution
--
--config FB_OMAP_031M3R
--	boolean "640 x 480 @ 60 Hz Reduced blanking"
--
--config FB_OMAP_048M3R
--	boolean "800 x 600 @ 60 Hz Reduced blanking"
--
--config FB_OMAP_079M3R
--	boolean "1024 x 768 @ 60 Hz Reduced blanking"
--
--config FB_OMAP_092M9R
--	boolean "1280 x 720 @ 60 Hz Reduced blanking"
--
--endchoice
-+	  Enter video mode name to use if none is specified on the kernel
-+	  command line. If left blank, board-specific default timings
-+	  will be used. See omapfb_main.c for a list of valid mode names.
- 
- config FB_OMAP_LCDC_EXTERNAL
- 	bool "External LCD controller support"
-diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c
-index e9ffb92..c4c4049 100644
---- a/drivers/video/omap/omapfb_main.c
-+++ b/drivers/video/omap/omapfb_main.c
-@@ -36,6 +36,20 @@
- 
- #define MODULE_NAME	"omapfb"
- 
-+struct video_mode {
-+	const char	*name;
-+	int		x_res, y_res;
-+	int		pixel_clock;	/* In kHz */
-+	int		hsw;		/* Horizontal synchronization
-+					   pulse width */
-+	int		hfp;		/* Horizontal front porch */
-+	int		hbp;		/* Horizontal back porch */
-+	int		vsw;		/* Vertical synchronization
-+					   pulse width */
-+	int		vfp;		/* Vertical front porch */
-+	int		vbp;		/* Vertical back porch */
-+};
-+
- static unsigned int	def_accel;
- static unsigned long	def_vram[OMAPFB_PLANE_NUM];
- static unsigned int	def_vram_cnt;
-@@ -43,6 +57,7 @@ static unsigned long	def_vxres;
- static unsigned long	def_vyres;
- static unsigned int	def_rotate;
- static unsigned int	def_mirror;
-+static char		def_mode[16] = CONFIG_FB_OMAP_VIDEO_MODE;
- 
- #ifdef CONFIG_FB_OMAP_MANUAL_UPDATE
- static int		manual_update = 1;
-@@ -53,6 +68,7 @@ static int		manual_update;
- static struct platform_device	*fbdev_pdev;
- static struct lcd_panel		*fbdev_panel;
- static struct omapfb_device	*omapfb_dev;
-+static struct video_mode	video_mode;
- 
- struct caps_table_struct {
- 	unsigned long flag;
-@@ -83,6 +99,152 @@ static struct caps_table_struct color_caps[] = {
- 	{ 1 << OMAPFB_COLOR_YUY422,	"YUY422", },
- };
- 
-+static struct video_mode video_modes[] __initdata = {
-+	{
-+		/* 640 x 480 @ 60 Hz  Reduced blanking VESA CVT 0.31M3-R */
-+		.name		= "640x480@60",
-+		.x_res		= 640,
-+		.y_res		= 480,
-+		.hfp		= 48,
-+		.hsw		= 32,
-+		.hbp		= 80,
-+		.vfp		= 3,
-+		.vsw		= 4,
-+		.vbp		= 7,
-+		.pixel_clock	= 23500,
-+	},
-+	{
-+		/* 800 x 600 @ 60 Hz  Reduced blanking VESA CVT 0.48M3-R */
-+		.name		= "800x600@60",
-+		.x_res		= 800,
-+		.y_res		= 600,
-+		.hfp		= 48,
-+		.hsw		= 32,
-+		.hbp		= 80,
-+		.vfp		= 3,
-+		.vsw		= 4,
-+		.vbp		= 11,
-+		.pixel_clock	= 35500,
-+	},
-+	{
-+		/* 1024 x 768 @ 60 Hz  Reduced blanking VESA CVT 0.79M3-R */
-+		.name		= "1024x768@60",
-+		.x_res		= 1024,
-+		.y_res		= 768,
-+		.hfp		= 48,
-+		.hsw		= 32,
-+		.hbp		= 80,
-+		.vfp		= 3,
-+		.vsw		= 4,
-+		.vbp		= 15,
-+		.pixel_clock	= 56000,
-+	},
-+	{
-+		/* 1280 x 720 @ 60 Hz  Reduced blanking VESA CVT 0.92M9-R */
-+		.name		= "1280x720@60",
-+		.x_res		= 1280,
-+		.y_res		= 720,
-+		.hfp		= 48,
-+		.hsw		= 32,
-+		.hbp		= 80,
-+		.vfp		= 3,
-+		.vsw		= 5,
-+		.vbp		= 13,
-+		.pixel_clock	= 64000,
-+	},
-+	{
-+		/* 720 x 480 @ 60 Hz  CEA-861 Format 3 */
-+		.name		= "480p60",
-+		.x_res		= 720,
-+		.y_res		= 480,
-+		.hfp		= 16,
-+		.hsw		= 62,
-+		.hbp		= 60,
-+		.vfp		= 9,
-+		.vsw		= 6,
-+		.vbp		= 30,
-+		.pixel_clock	= 27027,
-+	},
-+	{
-+		/* 720 x 576 @ 60 Hz  CEA-861 Format 18 */
-+		.name		= "576p50",
-+		.x_res		= 720,
-+		.y_res		= 576,
-+		.hfp		= 12,
-+		.hsw		= 64,
-+		.hbp		= 68,
-+		.vfp		= 5,
-+		.vsw		= 5,
-+		.vbp		= 39,
-+		.pixel_clock	= 27000,
-+	},
-+	{
-+		/* 1280 x 720 @ 50 Hz  CEA-861B Format 19 */
-+		.name 		= "720p50",
-+		.x_res		= 1280,
-+		.y_res		= 720,
-+		.hfp		= 440,
-+		.hsw		= 40,
-+		.hbp		= 220,
-+		.vfp		= 20,
-+		.vsw		= 5,
-+		.vbp		= 5,
-+		.pixel_clock	= 74250,
-+	},
-+	{
-+		/* 1280 x 720 @ 60 Hz  CEA-861B Format 4 */
-+		.name		= "720p60",
-+		.x_res		= 1280,
-+		.y_res		= 720,
-+		.hfp		= 110,
-+		.hsw		= 40,
-+		.hbp		= 220,
-+		.vfp		= 20,
-+		.vsw		= 5,
-+		.vbp		= 5,
-+		.pixel_clock	= 74250,
-+	},
-+	{
-+		/* 1920 x 1080 @ 24 Hz  CEA-861B Format 32 */
-+		.name		= "1080p24",
-+		.x_res		= 1920,
-+		.y_res		= 1080,
-+		.hfp		= 148,
-+		.hsw		= 44,
-+		.hbp		= 638,
-+		.vfp		= 36,
-+		.vsw		= 5,
-+		.vbp		= 4,
-+		.pixel_clock	= 74250,
-+	},
-+	{
-+		/* 1920 x 1080 @ 25 Hz  CEA-861B Format 33 */
-+		.name		= "1080p25",
-+		.x_res		= 1920,
-+		.y_res		= 1080,
-+		.hfp		= 148,
-+		.hsw		= 44,
-+		.hbp		= 528,
-+		.vfp		= 36,
-+		.vsw		= 5,
-+		.vbp		= 4,
-+		.pixel_clock	= 74250,
-+	},
-+	{
-+		/* 1920 x 1080 @ 30 Hz  CEA-861B Format 34 */
-+		.name		= "1080p30",
-+		.x_res		= 1920,
-+		.y_res		= 1080,
-+		.hfp		= 148,
-+		.hsw		= 44,
-+		.hbp		= 88,
-+		.vfp		= 36,
-+		.vsw		= 5,
-+		.vbp		= 4,
-+		.pixel_clock	= 74250,
-+	},
-+};
-+
- /*
-  * ---------------------------------------------------------------------------
-  * LCD panel
-@@ -1714,6 +1876,20 @@ static int omapfb_do_probe(struct platform_device *pdev,
- 		goto cleanup;
- 	}
- 
-+	if (video_mode.name) {
-+		pr_info("omapfb: using mode %s\n", video_mode.name);
-+
-+		fbdev->panel->x_res	= video_mode.x_res;
-+		fbdev->panel->y_res	= video_mode.y_res;
-+		fbdev->panel->pixel_clock = video_mode.pixel_clock;
-+		fbdev->panel->hsw	= video_mode.hsw;
-+		fbdev->panel->hfp	= video_mode.hfp;
-+		fbdev->panel->hbp	= video_mode.hbp;
-+		fbdev->panel->vsw	= video_mode.vsw;
-+		fbdev->panel->vfp	= video_mode.vfp;
-+		fbdev->panel->vbp	= video_mode.vbp;
-+	}
-+
- 	r = fbdev->panel->init(fbdev->panel, fbdev);
- 	if (r)
- 		goto cleanup;
-@@ -1870,6 +2046,17 @@ static struct platform_driver omapfb_driver = {
- 	},
- };
- 
-+static void __init omapfb_find_mode(char *name, struct video_mode *vmode)
-+{
-+	int i;
-+
-+	for (i = 0; i < sizeof(video_modes)/sizeof(video_modes[0]); i++)
-+		if (!strcmp(name, video_modes[i].name)) {
-+			*vmode = video_modes[i];
-+			break;
-+		}
-+}
-+
- #ifndef MODULE
- 
- /* Process kernel command line parameters */
-@@ -1918,6 +2105,8 @@ static int __init omapfb_setup(char *options)
- 			def_mirror = (simple_strtoul(this_opt + 7, NULL, 0));
- 		else if (!strncmp(this_opt, "manual_update", 13))
- 			manual_update = 1;
-+		else if (!strncmp(this_opt, "mode:", 5))
-+			strncpy(def_mode, this_opt + 5, sizeof(def_mode));
- 		else {
- 			pr_debug("omapfb: invalid option\n");
- 			r = -1;
-@@ -1939,6 +2128,9 @@ static int __init omapfb_init(void)
- 		return -ENODEV;
- 	omapfb_setup(option);
- #endif
-+
-+	omapfb_find_mode(def_mode, &video_mode);
-+
- 	/* Register the driver with LDM */
- 	if (platform_driver_register(&omapfb_driver)) {
- 		pr_debug("failed to register omapfb driver\n");
-@@ -1960,6 +2152,7 @@ module_param_named(vyres, def_vyres, long, 0664);
- module_param_named(rotate, def_rotate, uint, 0664);
- module_param_named(mirror, def_mirror, uint, 0664);
- module_param_named(manual_update, manual_update, bool, 0664);
-+module_param_string(video_mode, def_mode, sizeof(def_mode), 0664);
- 
- module_init(omapfb_init);
- module_exit(omapfb_cleanup);
diff --git a/recipes/linux/linux-omap-pm/musb-support-high-bandwidth.patch.eml b/recipes/linux/linux-omap-pm/musb-support-high-bandwidth.patch.eml
deleted file mode 100644
index 0264a97045..0000000000
--- a/recipes/linux/linux-omap-pm/musb-support-high-bandwidth.patch.eml
+++ /dev/null
@@ -1,134 +0,0 @@
-Enables support for camera (as creative) requiring high bandwidth
-isochronous transfer.
-
-Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
----
- drivers/usb/musb/musb_core.c |   18 +++++++++---------
- drivers/usb/musb/musb_host.c |   32 +++++++++++++++++++++-----------
- 2 files changed, 30 insertions(+), 20 deletions(-)
-
-diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
-index c939f81..9914f70 100644
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -1063,17 +1063,17 @@ static struct fifo_cfg __initdata mode_4_cfg[] = {
- { .hw_ep_num =  7, .style = FIFO_TX,   .maxpacket = 512, },
- { .hw_ep_num =  7, .style = FIFO_RX,   .maxpacket = 512, },
- { .hw_ep_num =  8, .style = FIFO_TX,   .maxpacket = 512, },
--{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket = 512, },
-+{ .hw_ep_num =  8, .style = FIFO_RX,   .maxpacket =  64, },
- { .hw_ep_num =  9, .style = FIFO_TX,   .maxpacket = 512, },
--{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket = 512, },
-+{ .hw_ep_num =  9, .style = FIFO_RX,   .maxpacket =  64, },
- { .hw_ep_num = 10, .style = FIFO_TX,   .maxpacket = 512, },
--{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket = 512, },
--{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 512, },
--{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 512, },
--{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 512, },
--{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 512, },
--{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 512, },
--{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 512, },
-+{ .hw_ep_num = 10, .style = FIFO_RX,   .maxpacket =  64, },
-+{ .hw_ep_num = 11, .style = FIFO_TX,   .maxpacket = 256, },
-+{ .hw_ep_num = 11, .style = FIFO_RX,   .maxpacket = 256, },
-+{ .hw_ep_num = 12, .style = FIFO_TX,   .maxpacket = 256, },
-+{ .hw_ep_num = 12, .style = FIFO_RX,   .maxpacket = 256, },
-+{ .hw_ep_num = 13, .style = FIFO_TX,   .maxpacket = 256, },
-+{ .hw_ep_num = 13, .style = FIFO_RX,   .maxpacket = 4096, },
- { .hw_ep_num = 14, .style = FIFO_RXTX, .maxpacket = 1024, },
- { .hw_ep_num = 15, .style = FIFO_RXTX, .maxpacket = 1024, },
- };
-diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
-index 08e421f..84173df 100644
---- a/drivers/usb/musb/musb_host.c
-+++ b/drivers/usb/musb/musb_host.c
-@@ -1443,6 +1443,10 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 			/* packet error reported later */
- 			iso_err = true;
- 		}
-+	} else if (rx_csr & MUSB_RXCSR_INCOMPRX) {
-+		DBG(3, "end %d Highbandwidth  incomplete ISO packet received\n"
-+					, epnum);
-+		status = -EPROTO;
- 	}
- 
- 	/* faults abort the transfer */
-@@ -1595,7 +1599,13 @@ void musb_host_rx(struct musb *musb, u8 epnum)
- 				val &= ~MUSB_RXCSR_H_AUTOREQ;
- 			else
- 				val |= MUSB_RXCSR_H_AUTOREQ;
--			val |= MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB;
-+
-+			if (qh->maxpacket & ~0x7ff)
-+				/* Autoclear doesn't work in high bandwidth iso */
-+				val |= MUSB_RXCSR_DMAENAB;
-+			else
-+				val |= MUSB_RXCSR_AUTOCLEAR
-+					| MUSB_RXCSR_DMAENAB;
- 
- 			musb_writew(epio, MUSB_RXCSR,
- 				MUSB_RXCSR_H_WZC_BITS | val);
-@@ -1666,6 +1676,7 @@ static int musb_schedule(
- 	int			best_end, epnum;
- 	struct musb_hw_ep	*hw_ep = NULL;
- 	struct list_head	*head = NULL;
-+	u16 			maxpacket;
- 
- 	/* use fixed hardware for control and bulk */
- 	switch (qh->type) {
-@@ -1708,6 +1719,13 @@ static int musb_schedule(
- 	best_diff = 4096;
- 	best_end = -1;
- 
-+	if (qh->maxpacket & (1<<11))
-+		maxpacket = 2 * (qh->maxpacket & 0x7ff);
-+	else if (qh->maxpacket & (1<<12))
-+		maxpacket = 3 * (qh->maxpacket & 0x7ff);
-+	else
-+		maxpacket = (qh->maxpacket & 0x7ff);
-+
- 	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
- 		int	diff;
- 
-@@ -1718,9 +1736,9 @@ static int musb_schedule(
- 			continue;
- 
- 		if (is_in)
--			diff = hw_ep->max_packet_sz_rx - qh->maxpacket;
-+			diff = hw_ep->max_packet_sz_rx - maxpacket;
- 		else
--			diff = hw_ep->max_packet_sz_tx - qh->maxpacket;
-+			diff = hw_ep->max_packet_sz_tx - maxpacket;
- 
- 		if (diff > 0 && best_diff > diff) {
- 			best_diff = diff;
-@@ -1797,13 +1815,6 @@ static int musb_urb_enqueue(
- 	qh->is_ready = 1;
- 
- 	qh->maxpacket = le16_to_cpu(epd->wMaxPacketSize);
--
--	/* no high bandwidth support yet */
--	if (qh->maxpacket & ~0x7ff) {
--		ret = -EMSGSIZE;
--		goto done;
--	}
--
- 	qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
- 	qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
- 
-@@ -1897,7 +1908,6 @@ static int musb_urb_enqueue(
- 	}
- 	spin_unlock_irqrestore(&musb->lock, flags);
- 
--done:
- 	if (ret != 0) {
- 		usb_hcd_unlink_urb_from_ep(hcd, urb);
- 		kfree(qh);
--- 
-1.5.6
-
---
-To unsubscribe from this list: send the line "unsubscribe linux-omap" in
-the body of a message to majordomo@vger.kernel.org
-More majordomo info at  http://vger.kernel.org/majordomo-info.html
-
diff --git a/recipes/linux/linux-omap-pm/no-harry-potter.diff b/recipes/linux/linux-omap-pm/no-harry-potter.diff
deleted file mode 100644
index 2bb20ab9c0..0000000000
--- a/recipes/linux/linux-omap-pm/no-harry-potter.diff
+++ /dev/null
@@ -1,11 +0,0 @@
---- /tmp/Makefile	2008-04-24 14:36:20.509598016 +0200
-+++ git/arch/arm/Makefile	2008-04-24 14:36:31.949546584 +0200
-@@ -47,7 +47,7 @@
- # Note that GCC does not numerically define an architecture version
- # macro, but instead defines a whole series of macros which makes
- # testing for a specific architecture or later rather impossible.
--arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
-+arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
- arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
- # Only override the compiler option if ARMv6. The ARMv6K extensions are
- # always available in ARMv7
diff --git a/recipes/linux/linux-omap-pm/omap-2430-lcd.patch b/recipes/linux/linux-omap-pm/omap-2430-lcd.patch
deleted file mode 100644
index 8f8a687c06..0000000000
--- a/recipes/linux/linux-omap-pm/omap-2430-lcd.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- git/drivers/video/omap/lcd_2430sdp.c.orig	2007-08-13 14:35:17.000000000 -0700
-+++ git/drivers/video/omap/lcd_2430sdp.c	2007-08-13 14:35:55.000000000 -0700
-@@ -32,7 +32,7 @@
- #define LCD_PANEL_BACKLIGHT_GPIO	91
- #define LCD_PANEL_ENABLE_GPIO		154
- #define LCD_PIXCLOCK_MAX		5400 /* freq 5.4 MHz */
--#define PM_RECEIVER             TWL4030_MODULE_PM_RECIEVER
-+#define PM_RECEIVER             TWL4030_MODULE_PM_RECEIVER
- #define ENABLE_VAUX2_DEDICATED  0x09
- #define ENABLE_VAUX2_DEV_GRP    0x20
- 
diff --git a/recipes/linux/linux-omap-pm/oprofile-0.9.3.armv7.diff b/recipes/linux/linux-omap-pm/oprofile-0.9.3.armv7.diff
deleted file mode 100644
index 1eedbb50ff..0000000000
--- a/recipes/linux/linux-omap-pm/oprofile-0.9.3.armv7.diff
+++ /dev/null
@@ -1,599 +0,0 @@
-Hi,
-
-This patch adds Oprofile support on ARMv7, using the PMNC unit.
-Tested on OMAP3430 SDP.
-
-Feedback and comments are welcome.
-
-The patch to user space components is attached for reference. It i applies 
-against version 0.9.3 of oprofile source 
-(http://prdownloads.sourceforge.net/oprofile/oprofile-0.9.3.tar.gz).
-
-Regards,
-Jean.
-
----
-
-From: Jean Pihet <jpihet@mvista.com>
-Date: Tue, 6 May 2008 17:21:44 +0200
-Subject: [PATCH] ARM: Add ARMv7 oprofile support
-
-Add ARMv7 Oprofile support to kernel
-
-Signed-off-by: Jean Pihet <jpihet@mvista.com>
----
-
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index c60a27d..60b50a0 100644
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -161,6 +161,11 @@ config OPROFILE_MPCORE
- config OPROFILE_ARM11_CORE
- 	bool
- 
-+config OPROFILE_ARMV7
-+	def_bool y
-+	depends on CPU_V7 && !SMP
-+	bool
-+
- endif
- 
- config VECTORS_BASE
-diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
-index e61d0cc..88e31f5 100644
---- a/arch/arm/oprofile/Makefile
-+++ b/arch/arm/oprofile/Makefile
-@@ -11,3 +11,4 @@ oprofile-$(CONFIG_CPU_XSCALE)		+= op_model_xscale.o
- oprofile-$(CONFIG_OPROFILE_ARM11_CORE)	+= op_model_arm11_core.o
- oprofile-$(CONFIG_OPROFILE_ARMV6)	+= op_model_v6.o
- oprofile-$(CONFIG_OPROFILE_MPCORE)	+= op_model_mpcore.o
-+oprofile-$(CONFIG_OPROFILE_ARMV7)	+= op_model_v7.o
-diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
-index 0a5cf3a..3fcd752 100644
---- a/arch/arm/oprofile/common.c
-+++ b/arch/arm/oprofile/common.c
-@@ -145,6 +145,10 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) 
- 	spec = &op_mpcore_spec;
- #endif
- 
-+#ifdef CONFIG_OPROFILE_ARMV7
-+	spec = &op_armv7_spec;
-+#endif
-+
- 	if (spec) {
- 		ret = spec->init();
- 		if (ret < 0)
-diff --git a/arch/arm/oprofile/op_arm_model.h 
-b/arch/arm/oprofile/op_arm_model.h
-index 4899c62..8c4e4f6 100644
---- a/arch/arm/oprofile/op_arm_model.h
-+++ b/arch/arm/oprofile/op_arm_model.h
-@@ -26,6 +26,7 @@ extern struct op_arm_model_spec op_xscale_spec;
- 
- extern struct op_arm_model_spec op_armv6_spec;
- extern struct op_arm_model_spec op_mpcore_spec;
-+extern struct op_arm_model_spec op_armv7_spec;
- 
- extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
- 
-diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
-new file mode 100644
-index 0000000..a159bc1
---- /dev/null
-+++ b/arch/arm/oprofile/op_model_v7.c
-@@ -0,0 +1,407 @@
-+/**
-+ * @file op_model_v7.c
-+ * ARM V7 (Cortex A8) Event Monitor Driver
-+ *
-+ * @remark Copyright 2008 Jean Pihet <jpihet@mvista.com>
-+ * @remark Copyright 2004 ARM SMP Development Team
-+ */
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/oprofile.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/smp.h>
-+
-+#include "op_counter.h"
-+#include "op_arm_model.h"
-+#include "op_model_v7.h"
-+
-+/* #define DEBUG */
-+
-+
-+/*
-+ * ARM V7 PMNC support
-+ */
-+
-+static u32 cnt_en[CNTMAX];
-+
-+static inline void armv7_pmnc_write(u32 val)
-+{
-+	val &= PMNC_MASK;
-+	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r" (val));
-+}
-+
-+static inline u32 armv7_pmnc_read(void)
-+{
-+	u32 val;
-+
-+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-+	return val;
-+}
-+
-+static inline u32 armv7_pmnc_enable_counter(unsigned int cnt)
-+{
-+	u32 val;
-+
-+	if (cnt >= CNTMAX) {
-+		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
-+			" %d\n", smp_processor_id(), cnt);
-+		return -1;
-+	}
-+
-+	if (cnt == CCNT)
-+		val = CNTENS_C;
-+	else
-+		val = (1 << (cnt - CNT0));
-+
-+	val &= CNTENS_MASK;
-+	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-+
-+	return cnt;
-+}
-+
-+static inline u32 armv7_pmnc_disable_counter(unsigned int cnt)
-+{
-+	u32 val;
-+
-+	if (cnt >= CNTMAX) {
-+		printk(KERN_ERR "oprofile: CPU%u disabling wrong PMNC counter"
-+			" %d\n", smp_processor_id(), cnt);
-+		return -1;
-+	}
-+
-+	if (cnt == CCNT)
-+		val = CNTENC_C;
-+	else
-+		val = (1 << (cnt - CNT0));
-+
-+	val &= CNTENC_MASK;
-+	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-+
-+	return cnt;
-+}
-+
-+static inline u32 armv7_pmnc_enable_intens(unsigned int cnt)
-+{
-+	u32 val;
-+
-+	if (cnt >= CNTMAX) {
-+		printk(KERN_ERR "oprofile: CPU%u enabling wrong PMNC counter"
-+			" interrupt enable %d\n", smp_processor_id(), cnt);
-+		return -1;
-+	}
-+
-+	if (cnt == CCNT)
-+		val = INTENS_C;
-+	else
-+		val = (1 << (cnt - CNT0));
-+
-+	val &= INTENS_MASK;
-+	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-+
-+	return cnt;
-+}
-+
-+static inline u32 armv7_pmnc_getreset_flags(void)
-+{
-+	u32 val;
-+
-+	/* Read */
-+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-+
-+	/* Write to clear flags */
-+	val &= FLAG_MASK;
-+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-+
-+	return val;
-+}
-+
-+static inline int armv7_pmnc_select_counter(unsigned int cnt)
-+{
-+	u32 val;
-+
-+	if ((cnt == CCNT) || (cnt >= CNTMAX)) {
-+		printk(KERN_ERR "oprofile: CPU%u selecting wrong PMNC counteri"
-+			" %d\n", smp_processor_id(), cnt);
-+		return -1;
-+	}
-+
-+	val = (cnt - CNT0) & SELECT_MASK;
-+	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-+
-+	return cnt;
-+}
-+
-+static inline void armv7_pmnc_write_evtsel(unsigned int cnt, u32 val)
-+{
-+	if (armv7_pmnc_select_counter(cnt) == cnt) {
-+		val &= EVTSEL_MASK;
-+		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-+	}
-+}
-+
-+static void armv7_pmnc_reset_counter(unsigned int cnt)
-+{
-+	u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-+	u32 val = -(u32)counter_config[cpu_cnt].count;
-+
-+	switch (cnt) {
-+	case CCNT:
-+		armv7_pmnc_disable_counter(cnt);
-+
-+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (val));
-+
-+		if (cnt_en[cnt] != 0)
-+		    armv7_pmnc_enable_counter(cnt);
-+
-+		break;
-+
-+	case CNT0:
-+	case CNT1:
-+	case CNT2:
-+	case CNT3:
-+		armv7_pmnc_disable_counter(cnt);
-+
-+		if (armv7_pmnc_select_counter(cnt) == cnt)
-+		    asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (val));
-+
-+		if (cnt_en[cnt] != 0)
-+		    armv7_pmnc_enable_counter(cnt);
-+
-+		break;
-+
-+	default:
-+		printk(KERN_ERR "oprofile: CPU%u resetting wrong PMNC counter"
-+			" %d\n", smp_processor_id(), cnt);
-+		break;
-+	}
-+}
-+
-+int armv7_setup_pmnc(void)
-+{
-+	unsigned int cnt;
-+
-+	if (armv7_pmnc_read() & PMNC_E) {
-+		printk(KERN_ERR "oprofile: CPU%u PMNC still enabled when setup"
-+			" new event counter.\n", smp_processor_id());
-+		return -EBUSY;
-+	}
-+
-+	/*
-+	 * Initialize & Reset PMNC: C bit, D bit and P bit.
-+	 *  Note: Using a slower count for CCNT (D bit: divide by 64) results
-+	 *   in a more stable system
-+	 */
-+	armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D);
-+
-+
-+	for (cnt = CCNT; cnt < CNTMAX; cnt++) {
-+		unsigned long event;
-+		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-+
-+		/*
-+		 * Disable counter
-+		 */
-+		armv7_pmnc_disable_counter(cnt);
-+		cnt_en[cnt] = 0;
-+
-+		if (!counter_config[cpu_cnt].enabled)
-+			continue;
-+
-+		event = counter_config[cpu_cnt].event & 255;
-+
-+		/*
-+		 * Set event (if destined for PMNx counters)
-+		 * We don't need to set the event if it's a cycle count
-+		 */
-+		if (cnt != CCNT)
-+			armv7_pmnc_write_evtsel(cnt, event);
-+
-+		/*
-+		 * Enable interrupt for this counter
-+		 */
-+		armv7_pmnc_enable_intens(cnt);
-+
-+		/*
-+		 * Reset counter
-+		 */
-+		armv7_pmnc_reset_counter(cnt);
-+
-+		/*
-+		 * Enable counter
-+		 */
-+		armv7_pmnc_enable_counter(cnt);
-+		cnt_en[cnt] = 1;
-+	}
-+
-+	return 0;
-+}
-+
-+static inline void armv7_start_pmnc(void)
-+{
-+	armv7_pmnc_write(armv7_pmnc_read() | PMNC_E);
-+}
-+
-+static inline void armv7_stop_pmnc(void)
-+{
-+	armv7_pmnc_write(armv7_pmnc_read() & ~PMNC_E);
-+}
-+
-+/*
-+ * CPU counters' IRQ handler (one IRQ per CPU)
-+ */
-+static irqreturn_t armv7_pmnc_interrupt(int irq, void *arg)
-+{
-+	struct pt_regs *regs = get_irq_regs();
-+	unsigned int cnt;
-+	u32 flags;
-+
-+
-+	/*
-+	 * Stop IRQ generation
-+	 */
-+	armv7_stop_pmnc();
-+
-+	/*
-+	 * Get and reset overflow status flags
-+	 */
-+	flags = armv7_pmnc_getreset_flags();
-+
-+	/*
-+	 * Cycle counter
-+	 */
-+	if (flags & FLAG_C) {
-+		u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), CCNT);
-+		armv7_pmnc_reset_counter(CCNT);
-+		oprofile_add_sample(regs, cpu_cnt);
-+	}
-+
-+	/*
-+	 * PMNC counters 0:3
-+	 */
-+	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
-+		if (flags & (1 << (cnt - CNT0))) {
-+			u32 cpu_cnt = CPU_COUNTER(smp_processor_id(), cnt);
-+			armv7_pmnc_reset_counter(cnt);
-+			oprofile_add_sample(regs, cpu_cnt);
-+		}
-+	}
-+
-+	/*
-+	 * Allow IRQ generation
-+	 */
-+	armv7_start_pmnc();
-+
-+	return IRQ_HANDLED;
-+}
-+
-+int armv7_request_interrupts(int *irqs, int nr)
-+{
-+	unsigned int i;
-+	int ret = 0;
-+
-+	for (i = 0; i < nr; i++) {
-+		ret = request_irq(irqs[i], armv7_pmnc_interrupt,
-+				IRQF_DISABLED, "CP15 PMNC", NULL);
-+		if (ret != 0) {
-+			printk(KERN_ERR "oprofile: unable to request IRQ%u"
-+				" for ARMv7\n",
-+			       irqs[i]);
-+			break;
-+		}
-+	}
-+
-+	if (i != nr)
-+		while (i-- != 0)
-+			free_irq(irqs[i], NULL);
-+
-+	return ret;
-+}
-+
-+void armv7_release_interrupts(int *irqs, int nr)
-+{
-+	unsigned int i;
-+
-+	for (i = 0; i < nr; i++)
-+		free_irq(irqs[i], NULL);
-+}
-+
-+#ifdef DEBUG
-+static void armv7_pmnc_dump_regs(void)
-+{
-+	u32 val;
-+	unsigned int cnt;
-+
-+	printk(KERN_INFO "PMNC registers dump:\n");
-+
-+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-+	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-+
-+	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-+	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-+
-+	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-+	printk(KERN_INFO "INTENS=0x%08x\n", val);
-+
-+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-+	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-+
-+	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-+	printk(KERN_INFO "SELECT=0x%08x\n", val);
-+
-+	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-+	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-+
-+	for (cnt = CNT0; cnt < CNTMAX; cnt++) {
-+		armv7_pmnc_select_counter(cnt);
-+		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-+		printk(KERN_INFO "CNT[%d] count =0x%08x\n", cnt-CNT0, val);
-+		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-+		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", cnt-CNT0, val);
-+	}
-+}
-+#endif
-+
-+
-+static int irqs[] = {
-+#ifdef CONFIG_ARCH_OMAP3
-+	INT_34XX_BENCH_MPU_EMUL,
-+#endif
-+};
-+
-+static void armv7_pmnc_stop(void)
-+{
-+#ifdef DEBUG
-+	armv7_pmnc_dump_regs();
-+#endif
-+	armv7_stop_pmnc();
-+	armv7_release_interrupts(irqs, ARRAY_SIZE(irqs));
-+}
-+
-+static int armv7_pmnc_start(void)
-+{
-+	int ret;
-+
-+#ifdef DEBUG
-+	armv7_pmnc_dump_regs();
-+#endif
-+	ret = armv7_request_interrupts(irqs, ARRAY_SIZE(irqs));
-+	if (ret >= 0)
-+		armv7_start_pmnc();
-+
-+	return ret;
-+}
-+
-+static int armv7_detect_pmnc(void)
-+{
-+	return 0;
-+}
-+
-+struct op_arm_model_spec op_armv7_spec = {
-+	.init		= armv7_detect_pmnc,
-+	.num_counters	= 5,
-+	.setup_ctrs	= armv7_setup_pmnc,
-+	.start		= armv7_pmnc_start,
-+	.stop		= armv7_pmnc_stop,
-+	.name		= "arm/armv7",
-+};
-diff --git a/arch/arm/oprofile/op_model_v7.h b/arch/arm/oprofile/op_model_v7.h
-new file mode 100644
-index 0000000..08f40ea
---- /dev/null
-+++ b/arch/arm/oprofile/op_model_v7.h
-@@ -0,0 +1,101 @@
-+/**
-+ * @file op_model_v7.h
-+ * ARM v7 (Cortex A8) Event Monitor Driver
-+ *
-+ * @remark Copyright 2008 Jean Pihet <jpihet@mvista.com>
-+ * @remark Copyright 2004 ARM SMP Development Team
-+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
-+ * @remark Copyright 2000-2004 MontaVista Software Inc
-+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
-+ * @remark Copyright 2004 Intel Corporation
-+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
-+ * @remark Copyright 2004 Oprofile Authors
-+ *
-+ * @remark Read the file COPYING
-+ *
-+ * @author Zwane Mwaikambo
-+ */
-+#ifndef OP_MODEL_V7_H
-+#define OP_MODEL_V7_H
-+
-+/*
-+ * Per-CPU PMNC: config reg
-+ */
-+#define PMNC_E		(1 << 0)	/* Enable all counters */
-+#define PMNC_P		(1 << 1)	/* Reset all counters */
-+#define PMNC_C		(1 << 2)	/* Cycle counter reset */
-+#define PMNC_D		(1 << 3)	/* CCNT counts every 64th cpu cycle */
-+#define PMNC_X		(1 << 4)	/* Export to ETM */
-+#define PMNC_DP		(1 << 5)	/* Disable CCNT if non-invasive debug*/
-+#define	PMNC_MASK	0x3f		/* Mask for writable bits */
-+
-+/*
-+ * Available counters
-+ */
-+#define CCNT 		0
-+#define CNT0 		1
-+#define CNT1 		2
-+#define CNT2 		3
-+#define CNT3 		4
-+#define CNTMAX 		5
-+
-+#define CPU_COUNTER(cpu, counter)	((cpu) * CNTMAX + (counter))
-+
-+/*
-+ * CNTENS: counters enable reg
-+ */
-+#define CNTENS_P0	(1 << 0)
-+#define CNTENS_P1	(1 << 1)
-+#define CNTENS_P2	(1 << 2)
-+#define CNTENS_P3	(1 << 3)
-+#define CNTENS_C	(1 << 31)
-+#define	CNTENS_MASK	0x8000000f	/* Mask for writable bits */
-+
-+/*
-+ * CNTENC: counters disable reg
-+ */
-+#define CNTENC_P0	(1 << 0)
-+#define CNTENC_P1	(1 << 1)
-+#define CNTENC_P2	(1 << 2)
-+#define CNTENC_P3	(1 << 3)
-+#define CNTENC_C	(1 << 31)
-+#define	CNTENC_MASK	0x8000000f	/* Mask for writable bits */
-+
-+/*
-+ * INTENS: counters overflow interrupt enable reg
-+ */
-+#define INTENS_P0	(1 << 0)
-+#define INTENS_P1	(1 << 1)
-+#define INTENS_P2	(1 << 2)
-+#define INTENS_P3	(1 << 3)
-+#define INTENS_C	(1 << 31)
-+#define	INTENS_MASK	0x8000000f	/* Mask for writable bits */
-+
-+/*
-+ * EVTSEL: Event selection reg
-+ */
-+#define	EVTSEL_MASK	0x7f		/* Mask for writable bits */
-+
-+/*
-+ * SELECT: Counter selection reg
-+ */
-+#define	SELECT_MASK	0x1f		/* Mask for writable bits */
-+
-+/*
-+ * FLAG: counters overflow flag status reg
-+ */
-+#define FLAG_P0		(1 << 0)
-+#define FLAG_P1		(1 << 1)
-+#define FLAG_P2		(1 << 2)
-+#define FLAG_P3		(1 << 3)
-+#define FLAG_C		(1 << 31)
-+#define	FLAG_MASK	0x8000000f	/* Mask for writable bits */
-+
-+
-+int armv7_setup_pmu(void);
-+int armv7_start_pmu(void);
-+int armv7_stop_pmu(void);
-+int armv7_request_interrupts(int *, int);
-+void armv7_release_interrupts(int *, int);
-+
-+#endif
-
diff --git a/recipes/linux/linux-omap-pm/overo-cpufreq.diff b/recipes/linux/linux-omap-pm/overo-cpufreq.diff
new file mode 100644
index 0000000000..a51d8560e1
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/overo-cpufreq.diff
@@ -0,0 +1,25 @@
+--- /tmp/board-overo.c	2009-04-23 12:46:21.000000000 +0200
++++ git/arch/arm/mach-omap2/board-overo.c	2009-04-23 12:46:31.000000000 +0200
+@@ -48,6 +48,12 @@
+ #include <mach/nand.h>
+ #include <mach/usb.h>
+ 
++#include <mach/omap-pm.h>
++#include <mach/clock.h>
++
++#include "pm.h"
++#include "omap3-opp.h"
++
+ #include "sdram-micron-mt46h32m32lf-6.h"
+ #include "twl4030-generic-scripts.h"
+ #include "mmc-twl4030.h"
+@@ -359,7 +365,8 @@
+ 
+ static void __init overo_init_irq(void)
+ {
+-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL, NULL, NULL);
++    omap2_init_common_hw(mt46h32m32lf6_sdrc_params, omap3_mpu_rate_table,
++                 omap3_dsp_rate_table, omap3_l3_rate_table);
+ 	omap_init_irq();
+ 	omap_gpio_init();
+ }
diff --git a/recipes/linux/linux-omap-pm/overo/defconfig b/recipes/linux/linux-omap-pm/overo/defconfig
new file mode 100644
index 0000000000..0c86af8ec1
--- /dev/null
+++ b/recipes/linux/linux-omap-pm/overo/defconfig
@@ -0,0 +1,2250 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-omap1
+# Thu Apr 23 13:22:02 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+# CONFIG_OMAP3_DEBOBS is not set
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_TICK_GPTIMER=1
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+# CONFIG_OMAP_PM_SRF is not set
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_OVERO=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+# CONFIG_ARM_ERRATUM_451034 is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=y
+CONFIG_BT_HCIBTSDIO=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBRF6150 is not set
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=m
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+CONFIG_TWL4030_MADC=m
+CONFIG_TWL4030_POWEROFF=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_TWL4030_BCI_BATTERY is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
+CONFIG_SENSORS_OMAP34XX=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+# CONFIG_DVB_STV0288 is not set
+# CONFIG_DVB_STB6000 is not set
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+# CONFIG_DVB_TUNER_CX24113 is not set
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+# CONFIG_DVB_CX24116 is not set
+# CONFIG_DVB_SI21XX is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+# CONFIG_DVB_ISL6405 is not set
+CONFIG_DVB_ISL6421=m
+# CONFIG_DVB_LGS8GL5 is not set
+
+#
+# Tools to develop new frontends
+#
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_AF9013 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_VRAM_SIZE=10
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_N800 is not set
+# CONFIG_CTRL_BLIZZARD is not set
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_HRTIMER=m
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OVERO=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_OMAP_EHCI_PHY_MODE=y
+# CONFIG_OMAP_EHCI_TLL_MODE is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+CONFIG_USB_SERIAL_OPTION=m
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+# CONFIG_LEDS_OMAP_PWM is not set
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/recipes/linux/linux-omap-pm/0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch b/recipes/linux/linux-omap-pm/overo/ehci.patch
index d590f8ffb9..72c6b9bec3 100644
--- a/recipes/linux/linux-omap-pm/0001-This-merges-Steve-Kipisz-USB-EHCI-support.-He-star.patch
+++ b/recipes/linux/linux-omap-pm/overo/ehci.patch
@@ -1,44 +1,11 @@
-From f8f10f496bce396416d7156da876222c6ce8c341 Mon Sep 17 00:00:00 2001
-From: Steven Kipisz <skipisz@beagleboard.org>
-Date: Wed, 9 Jan 2009 12:01:11 -0600
-Subject: [PATCH-USB] Omap3 beagleboard: add support for EHCI in revision C1 boards
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
----
- arch/arm/mach-omap2/board-omap3beagle.c |   10 +---------
- arch/arm/mach-omap2/usb-ehci.c          |    4 +---
- drivers/usb/host/ehci-omap.c            |   26 ++++++++++++++++++++++++++
- 3 files changed, 28 insertions(+), 12 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index fe97bab..de81153 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -140,15 +140,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
- 	 * power switch and overcurrent detect
- 	 */
- 
--	gpio_request(gpio + 1, "EHCI_nOC");
--	gpio_direction_input(gpio + 1);
--
--	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
--	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
--	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
--
--	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
--	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-+        /* TODO: This needs to be modified to not rely on u-boot */
- 
- 	return 0;
- }
 diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
 index 489439d..2c6305b 100644
 --- a/arch/arm/mach-omap2/usb-ehci.c
 +++ b/arch/arm/mach-omap2/usb-ehci.c
 @@ -152,9 +152,7 @@ static void setup_ehci_io_mux(void)
+ 
  void __init usb_ehci_init(void)
  {
- #if     defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
 -	/* Setup Pin IO MUX for EHCI */
 -	if (cpu_is_omap34xx())
 -		setup_ehci_io_mux();
@@ -55,8 +22,8 @@ index 1b3266c..8472996 100644
   *		to get the PHY state machine in working state
   */
  #define EXTERNAL_PHY_RESET
-+#ifdef CONFIG_MACH_OMAP3_BEAGLE
-+#define	EXT_PHY_RESET_GPIO_PORT2	(147)
++#ifdef CONFIG_MACH_OVERO
++#define	EXT_PHY_RESET_GPIO_PORT2	(183)
 +#else
  #define	EXT_PHY_RESET_GPIO_PORT1	(57)
  #define	EXT_PHY_RESET_GPIO_PORT2	(61)
@@ -72,7 +39,7 @@ index 1b3266c..8472996 100644
   * Use the VBUS from Port1 to power VBUS of Port2 externally
   * So use Port2 as the working ULPI port
   */
-+#ifndef CONFIG_MACH_OMAP3_BEAGLE
++#ifndef CONFIG_MACH_OVERO
  #define VBUS_INTERNAL_CHARGEPUMP_HACK
 +#endif
  
@@ -82,7 +49,7 @@ index 1b3266c..8472996 100644
  
  #ifdef EXTERNAL_PHY_RESET
  	/* Refer: ISSUE1 */
-+#ifndef CONFIG_MACH_OMAP3_BEAGLE
++#ifndef CONFIG_MACH_OVERO
  	gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset");
  	gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0);
 +#endif
@@ -126,7 +93,7 @@ index 1b3266c..8472996 100644
  	 * Hold the PHY in RESET for enough time till PHY is settled and ready
  	 */
  	udelay(EXT_PHY_RESET_DELAY);
-+#ifndef CONFIG_MACH_OMAP3_BEAGLE
++#ifndef CONFIG_MACH_OVERO
  	gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1);
 +#endif
  	gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1);
@@ -136,7 +103,7 @@ index 1b3266c..8472996 100644
  
  
  #ifdef EXTERNAL_PHY_RESET
-+#ifndef CONFIG_MACH_OMAP3_BEAGLE
++#ifndef CONFIG_MACH_OVERO
  	gpio_free(EXT_PHY_RESET_GPIO_PORT1);
 +#endif
  	gpio_free(EXT_PHY_RESET_GPIO_PORT2);
diff --git a/recipes/linux/linux-omap-pm/register-all-OPPs.diff b/recipes/linux/linux-omap-pm/register-all-OPPs.diff
deleted file mode 100644
index 95e6b9bfab..0000000000
--- a/recipes/linux/linux-omap-pm/register-all-OPPs.diff
+++ /dev/null
@@ -1,12 +0,0 @@
---- /tmp/clock34xx.c	2009-02-18 13:51:18.000000000 +0100
-+++ git/arch/arm/mach-omap2/clock34xx.c	2009-02-18 13:51:51.000000000 +0100
-@@ -698,8 +698,7 @@
- 	if (!mpu_opps)
- 		return;
- 
--	/* Avoid registering the 120% Overdrive with CPUFreq */
--	prcm = mpu_opps + MAX_VDD1_OPP - 1;
-+	prcm = mpu_opps + MAX_VDD1_OPP;
- 	for (; prcm->rate; prcm--) {
- 		freq_table[i].index = i;
- 		freq_table[i].frequency = prcm->rate / 1000;
diff --git a/recipes/linux/linux-omap-pm/strongly-ordered-memory.diff b/recipes/linux/linux-omap-pm/strongly-ordered-memory.diff
deleted file mode 100644
index b60e4f4a6b..0000000000
--- a/recipes/linux/linux-omap-pm/strongly-ordered-memory.diff
+++ /dev/null
@@ -1,18 +0,0 @@
---- /tmp/irq.c	2008-09-16 10:43:30.000000000 +0200
-+++ git/arch/arm/mach-omap2/irq.c	2008-09-16 10:46:18.463198000 +0200
-@@ -64,6 +64,7 @@
- static void omap_ack_irq(unsigned int irq)
- {
- 	intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
-+	intc_bank_read_reg(&irq_banks[0],INTC_REVISION);
- }
- 
- static void omap_mask_irq(unsigned int irq)
-@@ -73,6 +74,7 @@
- 	irq &= (IRQ_BITS_PER_REG - 1);
- 
- 	intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
-+	intc_bank_read_reg(&irq_banks[0],INTC_REVISION);
- }
- 
- static void omap_unmask_irq(unsigned int irq)
diff --git a/recipes/linux/linux-omap-pm/tick-schedc-suppress-needless-timer-reprogramming.patch b/recipes/linux/linux-omap-pm/tick-schedc-suppress-needless-timer-reprogramming.patch
deleted file mode 100644
index c5cf4ef6ef..0000000000
--- a/recipes/linux/linux-omap-pm/tick-schedc-suppress-needless-timer-reprogramming.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From: "Woodruff, Richard" <r-woodruff2@ti.com>
-
-In my device I get many interrupts from a high speed USB device in a very
-short period of time.  The system spends a lot of time reprogramming the
-hardware timer which is in a slower timing domain as compared to the CPU. 
-This results in the CPU spending a huge amount of time waiting for the
-timer posting to be done.  All of this reprogramming is useless as the
-wake up time has not changed.
-
-As measured using ETM trace this drops my reprogramming penalty from
-almost 60% CPU load down to 15% during high interrupt rate.  I can send
-traces to show this.
-
-
-Suppress setting of duplicate timer event when timer already stopped. 
-Timer programming can be very costly and can result in long cpu stall/wait
-times.
-
-[akpm@linux-foundation.org: coding-style fixes]
-Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
-Cc: Thomas Gleixner <tglx@linutronix.de>
-
-On Wed, 24 Sep 2008 18:31:29 +0200 (CEST) Thomas Gleixner <tglx@linutronix.de> wrote:
-
-> No, we only fall trrough into raise_softirq() when the reprogram code
-> detects that the event already expired. So you change the flow :)
->
-> It does also not deal with delta_jiffies >= NEXT_TIMER_MAX_DELTA :(
->
-> I have a closer look on that.
-
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
----
-
- kernel/time/tick-sched.c |   19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
-diff -puN kernel/time/tick-sched.c~tick-schedc-suppress-needless-timer-reprogramming kernel/time/tick-sched.c
---- a/kernel/time/tick-sched.c~tick-schedc-suppress-needless-timer-reprogramming
-+++ a/kernel/time/tick-sched.c
-@@ -282,6 +282,17 @@ void tick_nohz_stop_sched_tick(int inidl
- 	/* Schedule the tick, if we are at least one jiffie off */
- 	if ((long)delta_jiffies >= 1) {
- 
-+		/*
-+		* calculate the expiry time for the next timer wheel
-+		* timer
-+		*/
-+		expires = ktime_add_ns(last_update, tick_period.tv64 *
-+				   delta_jiffies);
-+
-+		/* Skip reprogram of event if its not changed */
-+		if (ts->tick_stopped && ktime_equal(expires, dev->next_event))
-+			goto out2;
-+
- 		if (delta_jiffies > 1)
- 			cpu_set(cpu, nohz_cpu_mask);
- 		/*
-@@ -332,12 +343,7 @@ void tick_nohz_stop_sched_tick(int inidl
- 			goto out;
- 		}
- 
--		/*
--		 * calculate the expiry time for the next timer wheel
--		 * timer
--		 */
--		expires = ktime_add_ns(last_update, tick_period.tv64 *
--				       delta_jiffies);
-+		/* Mark expiries */
- 		ts->idle_expires = expires;
- 
- 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
-@@ -356,6 +362,7 @@ void tick_nohz_stop_sched_tick(int inidl
- 		tick_do_update_jiffies64(ktime_get());
- 		cpu_clear(cpu, nohz_cpu_mask);
- 	}
-+out2:
- 	raise_softirq_irqoff(TIMER_SOFTIRQ);
- out:
- 	ts->next_jiffies = next_jiffies;
-_
diff --git a/recipes/linux/linux-omap-pm/timer-suppression.patch b/recipes/linux/linux-omap-pm/timer-suppression.patch
deleted file mode 100644
index 04362c96e3..0000000000
--- a/recipes/linux/linux-omap-pm/timer-suppression.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
-index b854a89..26f5569 100644
---- a/kernel/time/tick-sched.c
-+++ b/kernel/time/tick-sched.c
-@@ -253,6 +253,16 @@ void tick_nohz_stop_sched_tick(void)
- 
- 	/* Schedule the tick, if we are at least one jiffie off */
- 	if ((long)delta_jiffies >= 1) {
-+		/*
-+		 * calculate the expiry time for the next timer wheel
-+		 * timer
-+		 */
-+		expires = ktime_add_ns(last_update, tick_period.tv64 *
-+					delta_jiffies);
-+
-+		/* Skip reprogram of event if its not changed */
-+		if(ts->tick_stopped && ktime_equal(expires, dev->next_event))
-+		goto out2;
- 
- 		if (delta_jiffies > 1)
- 			cpu_set(cpu, nohz_cpu_mask);
-@@ -304,12 +314,7 @@ void tick_nohz_stop_sched_tick(void)
- 			goto out;
- 		}
- 
--		/*
--		 * calculate the expiry time for the next timer wheel
--		 * timer
--		 */
--		expires = ktime_add_ns(last_update, tick_period.tv64 *
--				       delta_jiffies);
-+		/* Mark expiries */
- 		ts->idle_expires = expires;
- 
- 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
-@@ -328,6 +333,7 @@ void tick_nohz_stop_sched_tick(void)
- 		tick_do_update_jiffies64(ktime_get());
- 		cpu_clear(cpu, nohz_cpu_mask);
- 	}
-+out2:	
- 	raise_softirq_irqoff(TIMER_SOFTIRQ);
- out:
- 	ts->next_jiffies = next_jiffies;
diff --git a/recipes/linux/linux-omap-pm/touchscreen.patch b/recipes/linux/linux-omap-pm/touchscreen.patch
deleted file mode 100644
index 2325c401e4..0000000000
--- a/recipes/linux/linux-omap-pm/touchscreen.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
-index d8109ae..f8ce669 100644
---- a/arch/arm/mach-omap2/board-omap3evm.c
-+++ b/arch/arm/mach-omap2/board-omap3evm.c
-@@ -128,8 +128,16 @@ static int ads7846_get_pendown_state(void)
- }
- 
- struct ads7846_platform_data ads7846_config = {
-+	.x_max			= 0x0fff,
-+	.y_max			= 0x0fff,
-+	.x_plate_ohms		= 180,
-+	.pressure_max		= 255,
-+	.debounce_max		= 10,
-+	.debounce_tol		= 3,
-+	.debounce_rep		= 1,
- 	.get_pendown_state	= ads7846_get_pendown_state,
- 	.keep_vref_on		= 1,
-+	.settle_delay_usecs	= 150,
- };
- 
- static struct omap2_mcspi_device_config ads7846_mcspi_config = {
-
diff --git a/recipes/linux/linux-omap-pm/twl-asoc-fix-record.diff b/recipes/linux/linux-omap-pm/twl-asoc-fix-record.diff
deleted file mode 100644
index 9c0ceaa2e0..0000000000
--- a/recipes/linux/linux-omap-pm/twl-asoc-fix-record.diff
+++ /dev/null
@@ -1,34 +0,0 @@
-From linux-omap-owner@vger.kernel.org Sat Dec 06 02:14:21 2008
-Date: 	Fri, 5 Dec 2008 16:46:34 -0800
-From: "Steve Sakoman" <sakoman@gmail.com>
-To: "linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>
-Subject: [FYI PATCH] ASOC:TWL4030 Audio capture fix
-
-A couple of folks have noticed an issue with audio capture -- the
-capture result is always silence.
-
-The patch below is a quick fix for those with this issue.  There are
-substantial changes to the codec driver that will be trickling down
-from ASoC, and they deal with this issue differently.
-
-So consider this as a bandaid for those who don't want to wait for the
-trickle down :-)
-
-Steve
-
-
-diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
-index ee2f0d3..8b4aafb 100644
---- a/sound/soc/codecs/twl4030.c
-+++ b/sound/soc/codecs/twl4030.c
-@@ -45,8 +45,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
- 	0xc3, /* REG_OPTION		(0x2)	*/
- 	0x00, /* REG_UNKNOWN		(0x3)	*/
- 	0x00, /* REG_MICBIAS_CTL	(0x4)	*/
--	0x24, /* REG_ANAMICL		(0x5)	*/
--	0x04, /* REG_ANAMICR		(0x6)	*/
-+	0x34, /* REG_ANAMICL		(0x5)	*/
-+	0x14, /* REG_ANAMICR		(0x6)	*/
- 	0x0a, /* REG_AVADC_CTL		(0x7)	*/
- 	0x00, /* REG_ADCMICSEL		(0x8)	*/
- 	0x00, /* REG_DIGMIXING		(0x9)	*/
diff --git a/recipes/linux/linux-omap-pm/usbttyfix.patch b/recipes/linux/linux-omap-pm/usbttyfix.patch
deleted file mode 100644
index 997705a31b..0000000000
--- a/recipes/linux/linux-omap-pm/usbttyfix.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-To get USB HOST mode working on USB OTG Port with USB TTY enabled U-boot
-
-Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
----
---- linux-2.6.git/drivers/usb/musb/omap2430.c	2009-01-19 22:42:18.000000000 +0530
-+++ linux-2.6.git/drivers/usb/musb/omap2430.c	2009-02-19 12:45:22.000000000 +0530
-@@ -33,6 +33,7 @@
- #include <linux/list.h>
- #include <linux/clk.h>
- #include <linux/io.h>
-+#include <linux/i2c/twl4030.h>
- 
- #include <asm/mach-types.h>
- #include <mach/hardware.h>
-@@ -233,6 +234,14 @@ int __init musb_platform_init(struct mus
- 	omap_cfg_reg(AE5_2430_USB0HS_STP);
- #endif
- 
-+	/* Reset MUSB Controller */
-+	omap_writel(SOFTRST,OTG_SYSCONFIG);
-+
-+#if defined(CONFIG_TWL4030_USB)
-+	/* Reset the TWL USB PHY */
-+	twl4030_i2c_write_u8(TWL4030_MODULE_USB, 0x60, 0x4);
-+#endif
-+
- 	musb->xceiv = *x;
- 	musb_platform_resume(musb);
-