linux-omap 2.6.32: add dss2 driver for beagleboard

1 files changed, 308 insertions, 0 deletions

diff --git a/recipes/linux/linux-omap-2.6.32/dss2/beagle-dss2-support.diff b/recipes/linux/linux-omap-2.6.32/dss2/beagle-dss2-support.diff
new file mode 100755
index 0000000000..15d7971fa8
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.32/dss2/beagle-dss2-support.diff
@@ -0,0 +1,308 @@
+--- a/arch/arm/mach-omap2/board-omap3beagle.c 
++++ b/arch/arm/mach-omap2/board-omap3beagle.c 
+@@ -30,6 +30,7 @@
+ 
+ #include <linux/regulator/machine.h>
+ #include <linux/i2c/twl4030.h>
++#include <linux/omapfb.h>
+ 
+ #include <mach/hardware.h>
+ #include <asm/mach-types.h>
+@@ -44,6 +45,7 @@
+ #include <plat/mux.h>
+ #include <plat/usb.h>
+ #include <plat/timer-gp.h>
++#include <plat/display.h>
+ 
+ #include "mmc-twl4030.h"
+ 
+@@ -115,15 +117,6 @@
+ 		.gpio_wp	= 29,
+ 	},
+ 	{}	/* Terminator */
+-};
+-
+-static struct platform_device omap3_beagle_lcd_device = {
+-	.name		= "omap3beagle_lcd",
+-	.id		= -1,
+-};
+-
+-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+-	.ctrl_name	= "internal",
+ };
+ 
+ static struct regulator_consumer_supply beagle_vmmc1_supply = {
+@@ -179,16 +172,6 @@
+ 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ 				| BIT(15) | BIT(16) | BIT(17),
+ 	.setup		= beagle_twl_gpio_setup,
+-};
+-
+-static struct regulator_consumer_supply beagle_vdac_supply = {
+-	.supply		= "vdac",
+-	.dev		= &omap3_beagle_lcd_device.dev,
+-};
+-
+-static struct regulator_consumer_supply beagle_vdvi_supply = {
+-	.supply		= "vdvi",
+-	.dev		= &omap3_beagle_lcd_device.dev,
+ };
+ 
+ /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+@@ -221,35 +204,6 @@
+ 	.consumer_supplies	= &beagle_vsim_supply,
+ };
+ 
+-/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+-static struct regulator_init_data beagle_vdac = {
+-	.constraints = {
+-		.min_uV			= 1800000,
+-		.max_uV			= 1800000,
+-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+-					| REGULATOR_MODE_STANDBY,
+-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+-					| REGULATOR_CHANGE_STATUS,
+-	},
+-	.num_consumer_supplies	= 1,
+-	.consumer_supplies	= &beagle_vdac_supply,
+-};
+-
+-/* VPLL2 for digital video outputs */
+-static struct regulator_init_data beagle_vpll2 = {
+-	.constraints = {
+-		.name			= "VDVI",
+-		.min_uV			= 1800000,
+-		.max_uV			= 1800000,
+-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+-					| REGULATOR_MODE_STANDBY,
+-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+-					| REGULATOR_CHANGE_STATUS,
+-	},
+-	.num_consumer_supplies	= 1,
+-	.consumer_supplies	= &beagle_vdvi_supply,
+-};
+-
+ static struct twl4030_usb_data beagle_usb_data = {
+ 	.usb_mode	= T2_USB_MODE_ULPI,
+ };
+@@ -262,39 +216,6 @@
+ 	.audio_mclk = 26000000,
+ 	.audio = &beagle_audio_data,
+ };
+-
+-static struct twl4030_platform_data beagle_twldata = {
+-	.irq_base	= TWL4030_IRQ_BASE,
+-	.irq_end	= TWL4030_IRQ_END,
+-
+-	/* platform_data for children goes here */
+-	.usb		= &beagle_usb_data,
+-	.gpio		= &beagle_gpio_data,
+-	.codec		= &beagle_codec_data,
+-	.vmmc1		= &beagle_vmmc1,
+-	.vsim		= &beagle_vsim,
+-	.vdac		= &beagle_vdac,
+-	.vpll2		= &beagle_vpll2,
+-};
+-
+-static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
+-	{
+-		I2C_BOARD_INFO("twl4030", 0x48),
+-		.flags = I2C_CLIENT_WAKE,
+-		.irq = INT_34XX_SYS_NIRQ,
+-		.platform_data = &beagle_twldata,
+-	},
+-};
+-
+-static int __init omap3_beagle_i2c_init(void)
+-{
+-	omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
+-			ARRAY_SIZE(beagle_i2c_boardinfo));
+-	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+-	 * projector don't work reliably with 400kHz */
+-	omap_register_i2c_bus(3, 100, NULL, 0);
+-	return 0;
+-}
+ 
+ static struct gpio_led gpio_leds[] = {
+ 	{
+@@ -349,14 +270,156 @@
+ 	},
+ };
+ 
+-static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+-	{ OMAP_TAG_LCD,		&omap3_beagle_lcd_config },
+-};
++/* DSS */
++
++static int beagle_enable_dvi(struct omap_dss_device *dssdev)
++{
++	if (dssdev->reset_gpio != -1)
++		gpio_set_value(dssdev->reset_gpio, 1);
++
++	return 0;
++}
++
++static void beagle_disable_dvi(struct omap_dss_device *dssdev)
++{
++	if (dssdev->reset_gpio != -1)
++		gpio_set_value(dssdev->reset_gpio, 0);
++}
++
++static struct omap_dss_device beagle_dvi_device = {
++	.type = OMAP_DISPLAY_TYPE_DPI,
++	.name = "dvi",
++	.driver_name = "generic_panel",
++	.phy.dpi.data_lines = 24,
++	.reset_gpio = 170,
++	.platform_enable = beagle_enable_dvi,
++	.platform_disable = beagle_disable_dvi,
++};
++
++static int beagle_panel_enable_tv(struct omap_dss_device *dssdev)
++{
++	return 0;
++}
++
++static void beagle_panel_disable_tv(struct omap_dss_device *dssdev)
++{
++}
++
++static struct omap_dss_device beagle_tv_device = {
++	.name = "tv",
++	.driver_name = "venc",
++	.type = OMAP_DISPLAY_TYPE_VENC,
++	.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
++	.platform_enable = beagle_panel_enable_tv,
++	.platform_disable = beagle_panel_disable_tv,
++};
++
++static struct omap_dss_device *beagle_dss_devices[] = {
++	&beagle_dvi_device,
++	&beagle_tv_device,
++};
++
++static struct omap_dss_board_info beagle_dss_data = {
++	.num_devices = ARRAY_SIZE(beagle_dss_devices),
++	.devices = beagle_dss_devices,
++	.default_device = &beagle_dvi_device,
++};
++
++static struct platform_device beagle_dss_device = {
++	.name          = "omapdss",
++	.id            = -1,
++	.dev            = {
++		.platform_data = &beagle_dss_data,
++	},
++};
++
++static struct regulator_consumer_supply beagle_vdda_dac_supply = {
++	.supply		= "vdda_dac",
++	.dev		= &beagle_dss_device.dev,
++};
++
++static struct regulator_consumer_supply beagle_vdds_dsi_supply = {
++	.supply		= "vdds_dsi",
++	.dev		= &beagle_dss_device.dev,
++};
++
++static void __init beagle_display_init(void)
++{
++	int r;
++
++	r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset");
++	if (r < 0) {
++		printk(KERN_ERR "Unable to get DVI reset GPIO\n");
++		return;
++	}
++
++	gpio_direction_output(beagle_dvi_device.reset_gpio, 0);
++}
++
++/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
++static struct regulator_init_data beagle_vdac = {
++    .constraints = {
++        .min_uV         = 1800000,
++        .max_uV         = 1800000,
++        .apply_uV       = true,
++        .valid_modes_mask   = REGULATOR_MODE_NORMAL
++                    | REGULATOR_MODE_STANDBY,
++        .valid_ops_mask     = REGULATOR_CHANGE_MODE
++                    | REGULATOR_CHANGE_STATUS,
++    },
++    .num_consumer_supplies  = 1,
++    .consumer_supplies  = &beagle_vdda_dac_supply,
++};
++
++/* VPLL2 for digital video outputs */
++static struct regulator_init_data beagle_vpll2 = {
++    .constraints = {
++        .name           = "VDVI",
++        .min_uV         = 1800000,
++        .max_uV         = 1800000,        .valid_modes_mask   = REGULATOR_MODE_NORMAL
++                    | REGULATOR_MODE_STANDBY,
++        .valid_ops_mask     = REGULATOR_CHANGE_MODE
++                    | REGULATOR_CHANGE_STATUS,
++    },
++    .num_consumer_supplies  = 1,
++    .consumer_supplies  = &beagle_vdds_dsi_supply,
++};
++
++static struct twl4030_platform_data beagle_twldata = {
++    .irq_base   = TWL4030_IRQ_BASE,
++    .irq_end    = TWL4030_IRQ_END,
++
++    /* platform_data for children goes here */
++    .usb        = &beagle_usb_data,
++    .gpio       = &beagle_gpio_data,
++    .vmmc1      = &beagle_vmmc1,
++    .vsim       = &beagle_vsim,
++    .vdac       = &beagle_vdac,
++    .vpll2      = &beagle_vpll2,
++};
++
++static struct i2c_board_info __initdata beagle_i2c1_boardinfo[] = {
++    {   
++        I2C_BOARD_INFO("twl4030", 0x48),
++        .flags = I2C_CLIENT_WAKE,
++        .irq = INT_34XX_SYS_NIRQ,
++        .platform_data = &beagle_twldata,
++    },
++};
++
++static int __init omap3_beagle_i2c_init(void)
++{
++    omap_register_i2c_bus(1, 2600, beagle_i2c1_boardinfo,
++            ARRAY_SIZE(beagle_i2c1_boardinfo));
++    /* Bus 3 is attached to the DVI port where devices like the pico DLP
++     * projector don't work reliably with 400kHz */
++    omap_register_i2c_bus(3, 100, NULL, 0);
++    return 0;
++}
++
+ 
+ static void __init omap3_beagle_init_irq(void)
+ {
+-	omap_board_config = omap3_beagle_config;
+-	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
+ 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ 			     mt46h32m32lf6_sdrc_params);
+ 	omap_init_irq();
+@@ -367,7 +430,7 @@
+ }
+ 
+ static struct platform_device *omap3_beagle_devices[] __initdata = {
+-	&omap3_beagle_lcd_device,
++	&beagle_dss_device,
+ 	&leds_gpio,
+ 	&keys_gpio,
+ };
+@@ -437,6 +500,8 @@
+ 	usb_musb_init();
+ 	usb_ehci_init(&ehci_pdata);
+ 	omap3beagle_flash_init();
++
++	beagle_display_init();
+ 
+ 	/* Ensure SDRC pins are mux'd for self-refresh */
+ 	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+