linux-omap 2.6.29: update overo bits and apply some patches from the overo OE branch

7 files changed, 594 insertions, 108 deletions

diff --git a/recipes/linux/linux-omap-2.6.29/DSS2.diff b/recipes/linux/linux-omap-2.6.29/DSS2.diff
index 17617548ca..b2935aa17a 100644
--- a/recipes/linux/linux-omap-2.6.29/DSS2.diff
+++ b/recipes/linux/linux-omap-2.6.29/DSS2.diff
@@ -4630,7 +4630,7 @@ index 071f4b0..267bb6b 100644
 +
 +static struct omap_dss_display_config overo_display_data_lcd = {
 +	.type = OMAP_DISPLAY_TYPE_DPI,
-+	.name = "lcd",
++	.name = "lcd43",
 +	.panel_name = "samsung-lte430wq-f0c",
 +	.u.dpi.data_lines = 24,
 +	.panel_enable = overo_panel_enable_lcd,
diff --git a/recipes/linux/linux-omap-2.6.29/ads7846-detection.patch b/recipes/linux/linux-omap-2.6.29/ads7846-detection.patch
new file mode 100644
index 0000000000..25a1cb052c
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.29/ads7846-detection.patch
@@ -0,0 +1,41 @@
+diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
+index 2ae5ab8..a68b0a6 100644
+--- a/drivers/input/touchscreen/ads7846.c
++++ b/drivers/input/touchscreen/ads7846.c
+@@ -1154,9 +1154,16 @@ static int __devinit ads7846_probe(struct spi_device *spi)
+ 	/* take a first sample, leaving nPENIRQ active and vREF off; avoid
+ 	 * the touchscreen, in case it's not connected.
+ 	 */
+-	(void) ads7846_read12_ser(&spi->dev,
++	err = ads7846_read12_ser(&spi->dev,
+ 			  READ_12BIT_SER(vaux) | ADS_PD10_ALL_ON);
+ 
++	/* if sample is all 0's or all 1's then there is no device on spi */	
++	if ( (err == 0x000) || (err == 0xfff)) {
++		dev_info(&spi->dev, "no device detected, test read result was 0x%08X\n", err);
++		err = -ENODEV;
++		goto err_free_irq;
++	}
++
+ 	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
+ 	if (err)
+ 		goto err_remove_hwmon;
+@@ -1174,7 +1181,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
+  err_free_irq:
+ 	free_irq(spi->irq, ts);
+  err_free_gpio:
+-	if (ts->gpio_pendown != -1)
++	if (!ts->get_pendown_state && ts->gpio_pendown != -1)
+ 		gpio_free(ts->gpio_pendown);
+  err_cleanup_filter:
+ 	if (ts->filter_cleanup)
+@@ -1201,7 +1208,7 @@ static int __devexit ads7846_remove(struct spi_device *spi)
+ 	/* suspend left the IRQ disabled */
+ 	enable_irq(ts->spi->irq);
+ 
+-	if (ts->gpio_pendown != -1)
++	if (!ts->get_pendown_state && ts->gpio_pendown != -1)
+ 		gpio_free(ts->gpio_pendown);
+ 
+ 	if (ts->filter_cleanup)
+
diff --git a/recipes/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch b/recipes/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch
new file mode 100644
index 0000000000..b2b920037e
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.29/beagleboard/beagle-asoc.patch
@@ -0,0 +1,35 @@
+diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
+index 4f7f040..ccd8973 100644
+--- a/sound/soc/omap/Kconfig
++++ b/sound/soc/omap/Kconfig
+@@ -55,3 +55,13 @@ config SND_OMAP_SOC_OMAP3_PANDORA
+ 	select SND_SOC_TWL4030
+ 	help
+ 	  Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
++
++config SND_OMAP_SOC_OMAP3_BEAGLE
++	tristate "SoC Audio support for OMAP3 Beagle"
++	depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_BEAGLE
++	select SND_OMAP_SOC_MCBSP
++	select SND_SOC_TWL4030
++	help
++	  Say Y if you want to add support for SoC audio on the Beagleboard.
++
++
+diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
+index 76fedd9..0c9e4ac 100644
+--- a/sound/soc/omap/Makefile
++++ b/sound/soc/omap/Makefile
+@@ -12,6 +12,7 @@ snd-soc-overo-objs := overo.o
+ snd-soc-omap2evm-objs := omap2evm.o
+ snd-soc-sdp3430-objs := sdp3430.o
+ snd-soc-omap3pandora-objs := omap3pandora.o
++snd-soc-omap3beagle-objs := omap3beagle.o
+ 
+ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
+ obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
+@@ -19,3 +20,4 @@ obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
+ obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
+ obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
+ obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
++obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o
diff --git a/recipes/linux/linux-omap-2.6.29/ehci.patch b/recipes/linux/linux-omap-2.6.29/beagleboard/ehci.patch
index 5a8c84471b..5a8c84471b 100644
--- a/recipes/linux/linux-omap-2.6.29/ehci.patch
+++ b/recipes/linux/linux-omap-2.6.29/beagleboard/ehci.patch
diff --git a/recipes/linux/linux-omap-2.6.29/fix-audio-capture.patch b/recipes/linux/linux-omap-2.6.29/fix-audio-capture.patch
new file mode 100644
index 0000000000..c5ff914757
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.29/fix-audio-capture.patch
@@ -0,0 +1,16 @@
+diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
+index ee2f0d3..8b4aafb 100644
+--- a/sound/soc/codecs/twl4030.c
++++ b/sound/soc/codecs/twl4030.c
+@@ -45,8 +45,8 @@ static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
+ 	0xc3, /* REG_OPTION		(0x2)	*/
+ 	0x00, /* REG_UNKNOWN		(0x3)	*/
+ 	0x00, /* REG_MICBIAS_CTL	(0x4)	*/
+-	0x20, /* REG_ANAMICL		(0x5)	*/
+-	0x00, /* REG_ANAMICR		(0x6)	*/
++	0x34, /* REG_ANAMICL		(0x5)	*/
++	0x14, /* REG_ANAMICR		(0x6)	*/
+ 	0x00, /* REG_AVADC_CTL		(0x7)	*/
+ 	0x00, /* REG_ADCMICSEL		(0x8)	*/
+ 	0x00, /* REG_DIGMIXING		(0x9)	*/
+
diff --git a/recipes/linux/linux-omap-2.6.29/overo/defconfig b/recipes/linux/linux-omap-2.6.29/overo/defconfig
index c92e425140..e5b59e619b 100644
--- a/recipes/linux/linux-omap-2.6.29/overo/defconfig
+++ b/recipes/linux/linux-omap-2.6.29/overo/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-omap1
-# Wed Feb  4 12:40:38 2009
+# Linux kernel version: 2.6.29-omap1
+# Sat Apr  4 17:29:08 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -41,25 +41,38 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
+CONFIG_RELAY=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 # CONFIG_SYSCTL_SYSCALL is not set
@@ -70,10 +83,8 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -81,10 +92,12 @@ CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -95,7 +108,6 @@ CONFIG_HAVE_CLK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -103,11 +115,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -123,7 +133,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
 CONFIG_FREEZER=y
 
 #
@@ -134,7 +143,6 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
@@ -161,11 +169,13 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -189,7 +199,6 @@ CONFIG_OMAP_BOOT_REASON=y
 # CONFIG_OMAP_GPIO_SWITCH is not set
 # CONFIG_OMAP_MUX is not set
 CONFIG_OMAP_MCBSP=y
-# CONFIG_OMAP_MMU_FWK is not set
 # CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
@@ -199,21 +208,13 @@ CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
-CONFIG_OMAP2_DSS_RFBI=y
-CONFIG_OMAP2_DSS_VENC=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_USE_DSI_PLL=y
-# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
 #
 # OMAP Board Type
 #
+# CONFIG_MACH_NOKIA_RX51 is not set
 # CONFIG_MACH_OMAP_LDP is not set
 # CONFIG_MACH_OMAP_3430SDP is not set
 # CONFIG_MACH_OMAP3EVM is not set
@@ -222,14 +223,6 @@ CONFIG_MACH_OVERO=y
 # CONFIG_MACH_OMAP3_PANDORA is not set
 
 #
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
 # Processor Type
 #
 CONFIG_CPU_32=y
@@ -290,7 +283,6 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
@@ -344,7 +336,6 @@ CONFIG_NEON=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=y
@@ -364,6 +355,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -382,7 +374,7 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
+CONFIG_NET_IPIP=m
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
@@ -426,10 +418,14 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
 # CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
 # CONFIG_DECNET is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -438,6 +434,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -459,8 +456,6 @@ CONFIG_BT_HIDP=y
 #
 # Bluetooth device drivers
 #
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
 # CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIBTSDIO is not set
 CONFIG_BT_HCIUART=y
@@ -477,10 +472,16 @@ CONFIG_BT_HCIBPA10X=y
 # CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_NL80211=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 
 #
@@ -492,14 +493,10 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y
 # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT="pid"
 # CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_LEDS is not set
+CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
 # CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_CRYPT_TKIP=y
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -524,6 +521,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -588,7 +586,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
+CONFIG_MTD_NAND_OMAP2=y
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -597,9 +595,22 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -616,6 +627,7 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -635,7 +647,8 @@ CONFIG_SCSI_PROC_FS=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
 
@@ -658,6 +671,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
@@ -687,17 +701,82 @@ CONFIG_DUMMY=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_NET_ETHERNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=m
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
 # CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -710,7 +789,7 @@ CONFIG_USB_USBNET=y
 CONFIG_USB_NET_AX8817X=y
 CONFIG_USB_NET_CDCETHER=y
 CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
+CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_NET_GL620A=m
 CONFIG_USB_NET_NET1080=m
 CONFIG_USB_NET_PLUSB=m
@@ -778,7 +857,6 @@ CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
 CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -789,7 +867,23 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -831,10 +925,10 @@ CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -872,20 +966,15 @@ CONFIG_I2C_OMAP=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_MADC=m
-CONFIG_TWL4030_PWRBUTTON=y
 CONFIG_TWL4030_POWEROFF=y
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_LP5521 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -898,12 +987,12 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
 CONFIG_SPI_OMAP24XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_TSC210X is not set
 # CONFIG_SPI_TSC2301 is not set
 # CONFIG_SPI_SPIDEV is not set
@@ -955,6 +1044,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -975,6 +1065,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4245 is not set
 # CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
@@ -1028,6 +1119,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
 CONFIG_TWL4030_CORE=y
 # CONFIG_TWL4030_POWER is not set
 # CONFIG_MFD_TMIO is not set
@@ -1037,6 +1129,7 @@ CONFIG_TWL4030_CORE=y
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
 
 #
 # Multimedia devices
@@ -1045,7 +1138,10 @@ CONFIG_TWL4030_CORE=y
 #
 # Multimedia core support
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
 CONFIG_DVB_CORE=m
 CONFIG_VIDEO_MEDIA=m
 
@@ -1057,21 +1153,106 @@ CONFIG_MEDIA_TUNER=m
 # CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
 CONFIG_MEDIA_TUNER_SIMPLE=m
 CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
 CONFIG_MEDIA_TUNER_TDA9887=m
 CONFIG_MEDIA_TUNER_TEA5761=m
 CONFIG_MEDIA_TUNER_TEA5767=m
 CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_CX2341X=m
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_GSPCA is not set
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_USB_MR800 is not set
+# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_DVB_DYNAMIC_MINORS is not set
 CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_TTPCI_EEPROM is not set
 
 #
 # Supported USB Adapters
 #
-# CONFIG_DVB_USB is not set
-CONFIG_DVB_TTUSB_BUDGET=m
-CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
 # CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
@@ -1089,6 +1270,12 @@ CONFIG_DVB_TTUSB_DEC=m
 # CONFIG_DVB_FE_CUSTOMISE is not set
 
 #
+# Multistandard (satellite) frontends
+#
+# CONFIG_DVB_STB0899 is not set
+# CONFIG_DVB_STB6100 is not set
+
+#
 # DVB-S (satellite) frontends
 #
 CONFIG_DVB_CX24110=m
@@ -1100,8 +1287,10 @@ CONFIG_DVB_S5H1420=m
 CONFIG_DVB_STV0299=m
 CONFIG_DVB_TDA8083=m
 CONFIG_DVB_TDA10086=m
+# CONFIG_DVB_TDA8261 is not set
 CONFIG_DVB_VES1X93=m
 CONFIG_DVB_TUNER_ITD1000=m
+# CONFIG_DVB_TUNER_CX24113 is not set
 CONFIG_DVB_TDA826X=m
 CONFIG_DVB_TUA6100=m
 # CONFIG_DVB_CX24116 is not set
@@ -1142,15 +1331,21 @@ CONFIG_DVB_NXT200X=m
 # CONFIG_DVB_OR51132 is not set
 CONFIG_DVB_BCM3510=m
 CONFIG_DVB_LGDT330X=m
+# CONFIG_DVB_LGDT3304 is not set
 CONFIG_DVB_S5H1409=m
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# ISDB-T (terrestrial) frontends
+#
+# CONFIG_DVB_S921 is not set
 
 #
 # Digital terrestrial only tuners/PLL
 #
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
 
 #
 # SEC control devices for DVB-S
@@ -1198,20 +1393,39 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=8
-CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG=y
-# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
-CONFIG_FB_OMAP2_NUM_FBS=3
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_VRAM_SIZE=10
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
 
 #
 # OMAP2/3 Display Device Drivers
 #
 CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SAMSUNG_LTE430WQ_F0C=y
 # CONFIG_PANEL_SHARP_LS037V7DW01 is not set
 # CONFIG_PANEL_N800 is not set
 # CONFIG_CTRL_BLIZZARD is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
 
 #
 # Display device support
@@ -1241,10 +1455,44 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SND is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_HRTIMER=m
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OVERO=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1265,11 +1513,9 @@ CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
 CONFIG_HID_EZKEY=y
 CONFIG_HID_GYRATION=y
 CONFIG_HID_LOGITECH=y
@@ -1277,12 +1523,15 @@ CONFIG_HID_LOGITECH=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
 CONFIG_HID_MICROSOFT=y
 CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
 CONFIG_HID_PANTHERLORD=y
 # CONFIG_PANTHERLORD_FF is not set
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
 # CONFIG_THRUSTMASTER_FF is not set
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
@@ -1314,8 +1563,9 @@ CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_OMAP_EHCI_PHY_MODE=y
 # CONFIG_OMAP_EHCI_TLL_MODE is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1332,8 +1582,10 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_OTG is not set
 # CONFIG_USB_GADGET_MUSB_HDRC is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
-# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
 
 #
 # USB Device Class drivers
@@ -1355,7 +1607,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1376,8 +1627,8 @@ CONFIG_USB_STORAGE=y
 # USB port drivers
 #
 CONFIG_USB_SERIAL=m
-# CONFIG_USB_EZUSB is not set
-# CONFIG_USB_SERIAL_GENERIC is not set
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
@@ -1387,7 +1638,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_CP2101 is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_FUNSOFT is not set
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
@@ -1397,7 +1648,7 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
 # CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
@@ -1411,12 +1662,14 @@ CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OPTION=m
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
 
 #
@@ -1445,7 +1698,7 @@ CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 # CONFIG_USB_GADGET_DEBUG_FS is not set
@@ -1456,13 +1709,15 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=m
+CONFIG_USB_OMAP=y
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -1475,7 +1730,7 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_G_PRINTER=m
 CONFIG_USB_CDC_COMPOSITE=m
 
 #
@@ -1487,7 +1742,7 @@ CONFIG_USB_OTG_UTILS=y
 CONFIG_TWL4030_USB=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
 # MMC/SD/SDIO Card Drivers
@@ -1500,7 +1755,7 @@ CONFIG_SDIO_UART=y
 #
 # MMC/SD/SDIO Host Controller Drivers
 #
-CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI is not set
 CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
@@ -1515,13 +1770,18 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_OMAP is not set
 # CONFIG_LEDS_OMAP_PWM is not set
 # CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
 #
-# CONFIG_LEDS_TRIGGERS is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1585,8 +1845,14 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # CBUS support
@@ -1609,13 +1875,16 @@ CONFIG_JBD=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
 # CONFIG_QUOTA_NETLINK_INTERFACE is not set
 CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
@@ -1653,10 +1922,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1681,7 +1947,14 @@ CONFIG_JFFS2_RUBIN=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -1804,6 +2077,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
@@ -1812,6 +2086,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
@@ -1820,7 +2095,10 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
 
 #
 # Tracers
@@ -1830,7 +2108,9 @@ CONFIG_HAVE_FUNCTION_TRACER=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1862,7 +2142,7 @@ CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
@@ -1900,7 +2180,7 @@ CONFIG_CRYPTO_XCBC=m
 #
 # Digest
 #
-CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1937,8 +2217,8 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 # Compression
 #
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1950,8 +2230,9 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
diff --git a/recipes/linux/linux-omap-2.6.29/overo/ehci.patch b/recipes/linux/linux-omap-2.6.29/overo/ehci.patch
new file mode 100644
index 0000000000..72c6b9bec3
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.29/overo/ehci.patch
@@ -0,0 +1,113 @@
+diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
+index 489439d..2c6305b 100644
+--- a/arch/arm/mach-omap2/usb-ehci.c
++++ b/arch/arm/mach-omap2/usb-ehci.c
+@@ -152,9 +152,7 @@ static void setup_ehci_io_mux(void)
+ 
+ void __init usb_ehci_init(void)
+ {
+-	/* Setup Pin IO MUX for EHCI */
+-	if (cpu_is_omap34xx())
+-		setup_ehci_io_mux();
++	/* TODO: Setup Pin IO MUX for EHCI - moved this temporarily to U-boot */
+ 
+ 	if (platform_device_register(&ehci_device) < 0) {
+ 		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+
+diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
+index 1b3266c..8472996 100644
+--- a/drivers/usb/host/ehci-omap.c
++++ b/drivers/usb/host/ehci-omap.c
+@@ -48,16 +48,26 @@
+  *		to get the PHY state machine in working state
+  */
+ #define EXTERNAL_PHY_RESET
++#ifdef CONFIG_MACH_OVERO
++#define	EXT_PHY_RESET_GPIO_PORT2	(183)
++#else
+ #define	EXT_PHY_RESET_GPIO_PORT1	(57)
+ #define	EXT_PHY_RESET_GPIO_PORT2	(61)
++#endif
+ #define	EXT_PHY_RESET_DELAY		(10)
+ 
++#define PHY_STP_PULLUP_ENABLE           (0x10)
++#define PHY_STP_PULLUP_DISABLE          (0x90)
++
++
+ /* ISSUE2:
+  * USBHOST supports External charge pump PHYs only
+  * Use the VBUS from Port1 to power VBUS of Port2 externally
+  * So use Port2 as the working ULPI port
+  */
++#ifndef CONFIG_MACH_OVERO
+ #define VBUS_INTERNAL_CHARGEPUMP_HACK
++#endif
+ 
+ #endif /* CONFIG_OMAP_EHCI_PHY_MODE */
+ 
+@@ -225,14 +235,43 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
+ 
+ #ifdef EXTERNAL_PHY_RESET
+ 	/* Refer: ISSUE1 */
++#ifndef CONFIG_MACH_OVERO
+ 	gpio_request(EXT_PHY_RESET_GPIO_PORT1, "USB1 PHY reset");
+ 	gpio_direction_output(EXT_PHY_RESET_GPIO_PORT1, 0);
++#endif
+ 	gpio_request(EXT_PHY_RESET_GPIO_PORT2, "USB2 PHY reset");
+ 	gpio_direction_output(EXT_PHY_RESET_GPIO_PORT2, 0);
++	gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 0);
+ 	/* Hold the PHY in RESET for enough time till DIR is high */
+ 	udelay(EXT_PHY_RESET_DELAY);
+ #endif
+ 
++        /*
++         * The PHY register 0x7 - Interface Control register is
++         * configured to disable the integrated STP pull-up resistor
++         * used for interface protection.
++	 *
++	 * May not need to be here.
++         */
++        omap_writel((0x7 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* interface reg */
++                (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/*   Write */
++                (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */
++                (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */
++                (PHY_STP_PULLUP_DISABLE),
++                EHCI_INSNREG05_ULPI);
++
++        while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)));
++
++        /* Force PHY to HS */
++        omap_writel((0x4 << EHCI_INSNREG05_ULPI_REGADD_SHIFT) |/* function ctrl */
++                (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) |/*   Write */
++                (1 << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) |/* Port1 */
++                (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT) |/* Start */
++                (0x40),
++                EHCI_INSNREG05_ULPI);
++
++        while (!(omap_readl(EHCI_INSNREG05_ULPI) & (1<<EHCI_INSNREG05_ULPI_CONTROL_SHIFT)));
++
+ 	/* Configure TLL for 60Mhz clk for ULPI */
+ 	ehci_clocks->usbtll_fck_clk = clk_get(&dev->dev, USBHOST_TLL_FCLK);
+ 	if (IS_ERR(ehci_clocks->usbtll_fck_clk))
+@@ -307,7 +346,9 @@ static int omap_start_ehc(struct platform_device *dev, struct usb_hcd *hcd)
+ 	 * Hold the PHY in RESET for enough time till PHY is settled and ready
+ 	 */
+ 	udelay(EXT_PHY_RESET_DELAY);
++#ifndef CONFIG_MACH_OVERO
+ 	gpio_set_value(EXT_PHY_RESET_GPIO_PORT1, 1);
++#endif
+ 	gpio_set_value(EXT_PHY_RESET_GPIO_PORT2, 1);
+ #endif
+ 
+@@ -393,7 +434,9 @@ static void omap_stop_ehc(struct platform_device *dev, struct usb_hcd *hcd)
+ 
+ 
+ #ifdef EXTERNAL_PHY_RESET
++#ifndef CONFIG_MACH_OVERO
+ 	gpio_free(EXT_PHY_RESET_GPIO_PORT1);
++#endif
+ 	gpio_free(EXT_PHY_RESET_GPIO_PORT2);
+ #endif
+
+--
+1.6.0.4.790.gaa14a