Merge branch 'org.openembedded.dev' of git@git.openembedded.net:openembedded into org.openembedded.dev

1 files changed, 23964 insertions, 0 deletions

diff --git a/recipes/linux/linux-omap-2.6.29/DSS2.diff b/recipes/linux/linux-omap-2.6.29/DSS2.diff
new file mode 100644
index 0000000000..17617548ca
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.29/DSS2.diff
@@ -0,0 +1,23964 @@
+ arch/arm/plat-omap/include/mach/omapfb.h                    |  398 -
+ b/Documentation/arm/OMAP/DSS                                |  311 +
+ b/arch/arm/configs/dss_omap3_beagle_defconfig               | 1369 ++++
+ b/arch/arm/configs/dss_overo_defconfig                      | 1826 +++++
+ b/arch/arm/mach-omap1/board-nokia770.c                      |    2 
+ b/arch/arm/mach-omap2/board-3430sdp.c                       |  218 
+ b/arch/arm/mach-omap2/board-n800.c                          |  217 
+ b/arch/arm/mach-omap2/board-omap3beagle.c                   |   91 
+ b/arch/arm/mach-omap2/board-omap3evm.c                      |  203 
+ b/arch/arm/mach-omap2/board-overo.c                         |   98 
+ b/arch/arm/mach-omap2/io.c                                  |    2 
+ b/arch/arm/plat-omap/Makefile                               |    2 
+ b/arch/arm/plat-omap/fb.c                                   |   30 
+ b/arch/arm/plat-omap/include/mach/display.h                 |  520 +
+ b/arch/arm/plat-omap/include/mach/vram.h                    |   33 
+ b/arch/arm/plat-omap/include/mach/vrfb.h                    |   47 
+ b/arch/arm/plat-omap/vram.c                                 |  615 +
+ b/arch/arm/plat-omap/vrfb.c                                 |  159 
+ b/drivers/video/Kconfig                                     |    1 
+ b/drivers/video/Makefile                                    |    1 
+ b/drivers/video/omap/Kconfig                                |    5 
+ b/drivers/video/omap/blizzard.c                             |    2 
+ b/drivers/video/omap/dispc.c                                |    2 
+ b/drivers/video/omap/hwa742.c                               |    2 
+ b/drivers/video/omap/lcd_2430sdp.c                          |    2 
+ b/drivers/video/omap/lcd_ams_delta.c                        |    2 
+ b/drivers/video/omap/lcd_apollon.c                          |    2 
+ b/drivers/video/omap/lcd_h3.c                               |    2 
+ b/drivers/video/omap/lcd_h4.c                               |    3 
+ b/drivers/video/omap/lcd_inn1510.c                          |    2 
+ b/drivers/video/omap/lcd_inn1610.c                          |    2 
+ b/drivers/video/omap/lcd_ldp.c                              |    2 
+ b/drivers/video/omap/lcd_mipid.c                            |    2 
+ b/drivers/video/omap/lcd_omap2evm.c                         |    2 
+ b/drivers/video/omap/lcd_omap3beagle.c                      |    2 
+ b/drivers/video/omap/lcd_omap3evm.c                         |    2 
+ b/drivers/video/omap/lcd_osk.c                              |    2 
+ b/drivers/video/omap/lcd_overo.c                            |    2 
+ b/drivers/video/omap/lcd_p2.c                               |    2 
+ b/drivers/video/omap/lcd_palmte.c                           |    2 
+ b/drivers/video/omap/lcd_palmtt.c                           |    2 
+ b/drivers/video/omap/lcd_palmz71.c                          |    3 
+ b/drivers/video/omap/lcdc.c                                 |    2 
+ b/drivers/video/omap/omapfb_main.c                          |    2 
+ b/drivers/video/omap/rfbi.c                                 |    3 
+ b/drivers/video/omap/sossi.c                                |    2 
+ b/drivers/video/omap2/Kconfig                               |    3 
+ b/drivers/video/omap2/Makefile                              |    4 
+ b/drivers/video/omap2/displays/Kconfig                      |   32 
+ b/drivers/video/omap2/displays/Makefile                     |    6 
+ b/drivers/video/omap2/displays/ctrl-blizzard.c              |  279 
+ b/drivers/video/omap2/displays/panel-generic.c              |   96 
+ b/drivers/video/omap2/displays/panel-n800.c                 |  435 +
+ b/drivers/video/omap2/displays/panel-samsung-lte430wq-f0c.c |  108 
+ b/drivers/video/omap2/displays/panel-sharp-ls037v7dw01.c    |  112 
+ b/drivers/video/omap2/dss/Kconfig                           |   89 
+ b/drivers/video/omap2/dss/Makefile                          |    6 
+ b/drivers/video/omap2/dss/core.c                            |  641 ++
+ b/drivers/video/omap2/dss/dispc.c                           | 2781 +++++++++
+ b/drivers/video/omap2/dss/display.c                         |  687 ++
+ b/drivers/video/omap2/dss/dpi.c                             |  379 +
+ b/drivers/video/omap2/dss/dsi.c                             | 3693 ++++++++++++
+ b/drivers/video/omap2/dss/dss.c                             |  345 +
+ b/drivers/video/omap2/dss/dss.h                             |  326 +
+ b/drivers/video/omap2/dss/manager.c                         |  463 +
+ b/drivers/video/omap2/dss/overlay.c                         |  587 +
+ b/drivers/video/omap2/dss/rfbi.c                            | 1304 ++++
+ b/drivers/video/omap2/dss/sdi.c                             |  245 
+ b/drivers/video/omap2/dss/venc.c                            |  600 +
+ b/drivers/video/omap2/omapfb/Kconfig                        |   35 
+ b/drivers/video/omap2/omapfb/Makefile                       |    2 
+ b/drivers/video/omap2/omapfb/omapfb-ioctl.c                 |  656 ++
+ b/drivers/video/omap2/omapfb/omapfb-main.c                  | 1944 ++++++
+ b/drivers/video/omap2/omapfb/omapfb-sysfs.c                 |  371 +
+ b/drivers/video/omap2/omapfb/omapfb.h                       |  143 
+ b/include/linux/omapfb.h                                    |  418 +
+ 76 files changed, 22501 insertions(+), 490 deletions(-)
+diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
+new file mode 100644
+index 0000000..9e902a2
+--- /dev/null
++++ b/Documentation/arm/OMAP/DSS
+@@ -0,0 +1,311 @@
++OMAP2/3 Display Subsystem
++-------------------------
++
++This is an almost total rewrite of the OMAP FB driver in drivers/video/omap
++(let's call it DSS1). The main differences between DSS1 and DSS2 are DSI,
++TV-out and multiple display support, but there are lots of small improvements
++also.
++
++The DSS2 driver (omapdss module) is in arch/arm/plat-omap/dss/, and the FB,
++panel and controller drivers are in drivers/video/omap2/. DSS1 and DSS2 live
++currently side by side, you can choose which one to use.
++
++Features
++--------
++
++Working and tested features include:
++
++- MIPI DPI (parallel) output
++- MIPI DSI output in command mode
++- MIPI DBI (RFBI) output
++- SDI output
++- TV output
++- All pieces can be compiled as a module or inside kernel
++- Use DISPC to update any of the outputs
++- Use CPU to update RFBI or DSI output
++- OMAP DISPC planes
++- RGB16, RGB24 packed, RGB24 unpacked
++- YUV2, UYVY
++- Scaling
++- Adjusting DSS FCK to find a good pixel clock
++- Use DSI DPLL to create DSS FCK
++
++Tested boards include:
++- OMAP3 SDP board
++- Beagle board
++- N810
++
++omapdss driver
++--------------
++
++The DSS driver does not itself have any support for Linux framebuffer, V4L or
++such like the current ones, but it has an internal kernel API that upper level
++drivers can use.
++
++The DSS driver models OMAP's overlays, overlay managers and displays in a
++flexible way to enable non-common multi-display configuration. In addition to
++modelling the hardware overlays, omapdss supports virtual overlays and overlay
++managers. These can be used when updating a display with CPU or system DMA.
++
++Panel and controller drivers
++----------------------------
++
++The drivers implement panel or controller specific functionality and are not
++usually visible to users except through omapfb driver.  They register
++themselves to the DSS driver.
++
++omapfb driver
++-------------
++
++The omapfb driver implements arbitrary number of standard linux framebuffers.
++These framebuffers can be routed flexibly to any overlays, thus allowing very
++dynamic display architecture.
++
++The driver exports some omapfb specific ioctls, which are compatible with the
++ioctls in the old driver.
++
++The rest of the non standard features are exported via sysfs. Whether the final
++implementation will use sysfs, or ioctls, is still open.
++
++V4L2 drivers
++------------
++
++V4L2 is being implemented in TI.
++
++From omapdss point of view the V4L2 drivers should be similar to framebuffer
++driver.
++
++Architecture
++--------------------
++
++Some clarification what the different components do:
++
++    - Framebuffer is a memory area inside OMAP's SRAM/SDRAM that contains the
++      pixel data for the image. Framebuffer has width and height and color
++      depth.
++    - Overlay defines where the pixels are read from and where they go on the
++      screen. The overlay may be smaller than framebuffer, thus displaying only
++      part of the framebuffer. The position of the overlay may be changed if
++      the overlay is smaller than the display.
++    - Overlay manager combines the overlays in to one image and feeds them to
++      display.
++    - Display is the actual physical display device.
++
++A framebuffer can be connected to multiple overlays to show the same pixel data
++on all of the overlays. Note that in this case the overlay input sizes must be
++the same, but, in case of video overlays, the output size can be different. Any
++framebuffer can be connected to any overlay.
++
++An overlay can be connected to one overlay manager. Also DISPC overlays can be
++connected only to DISPC overlay managers, and virtual overlays can be only
++connected to virtual overlays.
++
++An overlay manager can be connected to one display. There are certain
++restrictions which kinds of displays an overlay manager can be connected:
++
++    - DISPC TV overlay manager can be only connected to TV display.
++    - Virtual overlay managers can only be connected to DBI or DSI displays.
++    - DISPC LCD overlay manager can be connected to all displays, except TV
++      display.
++
++Sysfs
++-----
++The sysfs interface is mainly used for testing. I don't think sysfs
++interface is the best for this in the final version, but I don't quite know
++what would be the best interfaces for these things.
++
++The sysfs interface is divided to two parts: DSS and FB.
++
++/sys/class/graphics/fb? directory:
++mirror		0=off, 1=on
++rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
++rotate_type	0 = DMA rotation, 1 = VRFB rotation
++overlays	List of overlay numbers to which framebuffer pixels go
++phys_addr	Physical address of the framebuffer
++virt_addr	Virtual address of the framebuffer
++size		Size of the framebuffer
++
++/sys/devices/platform/omapdss/overlay? directory:
++enabled		0=off, 1=on
++input_size	width,height (ie. the framebuffer size)
++manager		Destination overlay manager name
++name
++output_size	width,height
++position	x,y
++screen_width	width
++
++/sys/devices/platform/omapdss/manager? directory:
++display		Destination display
++name
++
++/sys/devices/platform/omapdss/display? directory:
++ctrl_name	Controller name
++mirror		0=off, 1=on
++update_mode	0=off, 1=auto, 2=manual
++enabled		0=off, 1=on
++name
++rotate		Rotation 0-3 for 0, 90, 180, 270 degrees
++timings		Display timings (pixclock,xres/hfp/hbp/hsw,yres/vfp/vbp/vsw)
++		When writing, two special timings are accepted for tv-out:
++		"pal" and "ntsc"
++panel_name
++tear_elim	Tearing elimination 0=off, 1=on
++
++There are also some debugfs files at <debugfs>/omapdss/ which show information
++about clocks and registers.
++
++Examples
++--------
++
++The following definitions have been made for the examples below:
++
++ovl0=/sys/devices/platform/omapdss/overlay0
++ovl1=/sys/devices/platform/omapdss/overlay1
++ovl2=/sys/devices/platform/omapdss/overlay2
++
++mgr0=/sys/devices/platform/omapdss/manager0
++mgr1=/sys/devices/platform/omapdss/manager1
++
++lcd=/sys/devices/platform/omapdss/display0
++dvi=/sys/devices/platform/omapdss/display1
++tv=/sys/devices/platform/omapdss/display2
++
++fb0=/sys/class/graphics/fb0
++fb1=/sys/class/graphics/fb1
++fb2=/sys/class/graphics/fb2
++
++Default setup on OMAP3 SDP
++--------------------------
++
++Here's the default setup on OMAP3 SDP board. All planes go to LCD. DVI
++and TV-out are not in use. The columns from left to right are:
++framebuffers, overlays, overlay managers, displays. Framebuffers are
++handled by omapfb, and the rest by the DSS.
++
++FB0 --- GFX  -\            DVI
++FB1 --- VID1 --+- LCD ---- LCD
++FB2 --- VID2 -/   TV ----- TV
++
++Example: Switch from LCD to DVI
++----------------------
++
++w=`cat $dvi/horizontal | cut -d "," -f 1`
++h=`cat $dvi/vertical | cut -d "," -f 1`
++
++echo "0" > $lcd/enabled
++echo "" > $mgr0/display
++fbset -fb /dev/fb0 -xres $w -yres $h -vxres $w -vyres $h
++# at this point you have to switch the dvi/lcd dip-switch from the omap board
++echo "dvi" > $mgr0/display
++echo "1" > $dvi/enabled
++
++After this the configuration looks like:
++
++FB0 --- GFX  -\         -- DVI
++FB1 --- VID1 --+- LCD -/   LCD
++FB2 --- VID2 -/   TV ----- TV
++
++Example: Clone GFX overlay to LCD and TV
++-------------------------------
++
++w=`cat $tv/horizontal | cut -d "," -f 1`
++h=`cat $tv/vertical | cut -d "," -f 1`
++
++echo "0" > $ovl0/enabled
++echo "0" > $ovl1/enabled
++
++echo "" > $fb1/overlays
++echo "0,1" > $fb0/overlays
++
++echo "$w,$h" > $ovl1/output_size
++echo "tv" > $ovl1/manager
++
++echo "1" > $ovl0/enabled
++echo "1" > $ovl1/enabled
++
++echo "1" > $tv/enabled
++
++After this the configuration looks like (only relevant parts shown):
++
++FB0 +-- GFX  ---- LCD ---- LCD
++     \- VID1 ---- TV  ---- TV
++
++Misc notes
++----------
++
++OMAP FB allocates the framebuffer memory using the OMAP VRAM allocator.
++
++Using DSI DPLL to generate pixel clock it is possible produce the pixel clock
++of 86.5MHz (max possible), and with that you get 1280x1024@57 output from DVI.
++
++Rotation and mirroring currently only supports RGB565 and RGB8888 modes. VRFB
++does not support mirroring.
++
++VRFB rotation requires much more memory than non-rotated framebuffer, so you
++probably need to increase your vram setting before using VRFB rotation. Also,
++many applications may not work with VRFB if they do not pay attention to all
++framebuffer parameters.
++
++Kernel boot arguments
++---------------------
++
++vram=<size>
++	- Amount of total VRAM to preallocate. For example, "10M". omapfb
++	  allocates memory for framebuffers from VRAM.
++
++omapfb.mode=<display>:<mode>[,...]
++	- Default video mode for specified displays. For example,
++	  "dvi:800x400MR-24@60".  See drivers/video/modedb.c.
++	  There are also two special modes: "pal" and "ntsc" that
++	  can be used to tv out.
++
++omapfb.vram=<fbnum>:<size>[@<physaddr>][,...]
++	- VRAM allocated for a framebuffer. Normally omapfb allocates vram
++	  depending on the display size. With this you can manually allocate
++	  more or define the physical address of each framebuffer. For example,
++	  "1:4M" to allocate 4M for fb1.
++
++omapfb.debug=<y|n>
++	- Enable debug printing. You have to have OMAPFB debug support enabled
++	  in kernel config.
++
++omapfb.test=<y|n>
++	- Draw test pattern to framebuffer whenever framebuffer settings change.
++	  You need to have OMAPFB debug support enabled in kernel config.
++
++omapfb.vrfb=<y|n>
++	- Use VRFB rotation for all framebuffers.
++
++omapfb.rotate=<angle>
++	- Default rotation applied to all framebuffers.
++	  0 - 0 degree rotation
++	  1 - 90 degree rotation
++	  2 - 180 degree rotation
++	  3 - 270 degree rotation
++
++omapfb.mirror=<y|n>
++	- Default mirror for all framebuffers. Only works with DMA rotation.
++
++omapdss.def_disp=<display>
++	- Name of default display, to which all overlays will be connected.
++	  Common examples are "lcd" or "tv".
++
++omapdss.debug=<y|n>
++	- Enable debug printing. You have to have DSS debug support enabled in
++	  kernel config.
++
++TODO
++----
++
++DSS locking
++
++Error checking
++- Lots of checks are missing or implemented just as BUG()
++
++System DMA update for DSI
++- Can be used for RGB16 and RGB24P modes. Probably not for RGB24U (how
++  to skip the empty byte?)
++
++OMAP1 support
++- Not sure if needed
++
+diff --git a/arch/arm/configs/dss_omap3_beagle_defconfig b/arch/arm/configs/dss_omap3_beagle_defconfig
+new file mode 100644
+index 0000000..8a428db
+--- /dev/null
++++ b/arch/arm/configs/dss_omap3_beagle_defconfig
+@@ -0,0 +1,1369 @@
++#
++# Automatically generated make config: don't edit
++# Linux kernel version: 2.6.29-rc3-omap1
++# Mon Feb  2 12:09:46 2009
++#
++CONFIG_ARM=y
++CONFIG_SYS_SUPPORTS_APM_EMULATION=y
++CONFIG_GENERIC_GPIO=y
++CONFIG_GENERIC_TIME=y
++CONFIG_GENERIC_CLOCKEVENTS=y
++CONFIG_MMU=y
++# CONFIG_NO_IOPORT is not set
++CONFIG_GENERIC_HARDIRQS=y
++CONFIG_STACKTRACE_SUPPORT=y
++CONFIG_HAVE_LATENCYTOP_SUPPORT=y
++CONFIG_LOCKDEP_SUPPORT=y
++CONFIG_TRACE_IRQFLAGS_SUPPORT=y
++CONFIG_HARDIRQS_SW_RESEND=y
++CONFIG_GENERIC_IRQ_PROBE=y
++CONFIG_RWSEM_GENERIC_SPINLOCK=y
++# CONFIG_ARCH_HAS_ILOG2_U32 is not set
++# CONFIG_ARCH_HAS_ILOG2_U64 is not set
++CONFIG_GENERIC_HWEIGHT=y
++CONFIG_GENERIC_CALIBRATE_DELAY=y
++CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
++CONFIG_VECTORS_BASE=0xffff0000
++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
++
++#
++# General setup
++#
++CONFIG_EXPERIMENTAL=y
++CONFIG_BROKEN_ON_SMP=y
++CONFIG_INIT_ENV_ARG_LIMIT=32
++CONFIG_LOCALVERSION=""
++# CONFIG_LOCALVERSION_AUTO is not set
++CONFIG_SWAP=y
++CONFIG_SYSVIPC=y
++CONFIG_SYSVIPC_SYSCTL=y
++# CONFIG_POSIX_MQUEUE is not set
++CONFIG_BSD_PROCESS_ACCT=y
++# CONFIG_BSD_PROCESS_ACCT_V3 is not set
++# CONFIG_TASKSTATS is not set
++# CONFIG_AUDIT is not set
++
++#
++# RCU Subsystem
++#
++CONFIG_CLASSIC_RCU=y
++# CONFIG_TREE_RCU is not set
++# CONFIG_PREEMPT_RCU is not set
++# CONFIG_TREE_RCU_TRACE is not set
++# CONFIG_PREEMPT_RCU_TRACE is not set
++# CONFIG_IKCONFIG is not set
++CONFIG_LOG_BUF_SHIFT=14
++CONFIG_GROUP_SCHED=y
++CONFIG_FAIR_GROUP_SCHED=y
++# CONFIG_RT_GROUP_SCHED is not set
++CONFIG_USER_SCHED=y
++# CONFIG_CGROUP_SCHED is not set
++# CONFIG_CGROUPS is not set
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++# CONFIG_RELAY is not set
++# CONFIG_NAMESPACES is not set
++CONFIG_BLK_DEV_INITRD=y
++CONFIG_INITRAMFS_SOURCE=""
++CONFIG_CC_OPTIMIZE_FOR_SIZE=y
++CONFIG_SYSCTL=y
++CONFIG_EMBEDDED=y
++CONFIG_UID16=y
++# CONFIG_SYSCTL_SYSCALL is not set
++CONFIG_KALLSYMS=y
++# CONFIG_KALLSYMS_ALL is not set
++CONFIG_KALLSYMS_EXTRA_PASS=y
++CONFIG_HOTPLUG=y
++CONFIG_PRINTK=y
++CONFIG_BUG=y
++CONFIG_ELF_CORE=y
++CONFIG_COMPAT_BRK=y
++CONFIG_BASE_FULL=y
++CONFIG_FUTEX=y
++CONFIG_ANON_INODES=y
++CONFIG_EPOLL=y
++CONFIG_SIGNALFD=y
++CONFIG_TIMERFD=y
++CONFIG_EVENTFD=y
++CONFIG_SHMEM=y
++CONFIG_AIO=y
++CONFIG_VM_EVENT_COUNTERS=y
++CONFIG_SLAB=y
++# CONFIG_SLUB is not set
++# CONFIG_SLOB is not set
++# CONFIG_PROFILING is not set
++CONFIG_HAVE_OPROFILE=y
++# CONFIG_KPROBES is not set
++CONFIG_HAVE_KPROBES=y
++CONFIG_HAVE_KRETPROBES=y
++CONFIG_HAVE_CLK=y
++CONFIG_HAVE_GENERIC_DMA_COHERENT=y
++CONFIG_SLABINFO=y
++CONFIG_RT_MUTEXES=y
++CONFIG_BASE_SMALL=0
++CONFIG_MODULES=y
++# CONFIG_MODULE_FORCE_LOAD is not set
++CONFIG_MODULE_UNLOAD=y
++# CONFIG_MODULE_FORCE_UNLOAD is not set
++CONFIG_MODVERSIONS=y
++CONFIG_MODULE_SRCVERSION_ALL=y
++CONFIG_BLOCK=y
++# CONFIG_LBD is not set
++# CONFIG_BLK_DEV_IO_TRACE is not set
++# CONFIG_BLK_DEV_BSG is not set
++# CONFIG_BLK_DEV_INTEGRITY is not set
++
++#
++# IO Schedulers
++#
++CONFIG_IOSCHED_NOOP=y
++CONFIG_IOSCHED_AS=y
++CONFIG_IOSCHED_DEADLINE=y
++CONFIG_IOSCHED_CFQ=y
++CONFIG_DEFAULT_AS=y
++# CONFIG_DEFAULT_DEADLINE is not set
++# CONFIG_DEFAULT_CFQ is not set
++# CONFIG_DEFAULT_NOOP is not set
++CONFIG_DEFAULT_IOSCHED="anticipatory"
++# CONFIG_FREEZER is not set
++
++#
++# System Type
++#
++# CONFIG_ARCH_AAEC2000 is not set
++# CONFIG_ARCH_INTEGRATOR is not set
++# CONFIG_ARCH_REALVIEW is not set
++# CONFIG_ARCH_VERSATILE is not set
++# CONFIG_ARCH_AT91 is not set
++# CONFIG_ARCH_CLPS711X is not set
++# CONFIG_ARCH_EBSA110 is not set
++# CONFIG_ARCH_EP93XX is not set
++# CONFIG_ARCH_FOOTBRIDGE is not set
++# CONFIG_ARCH_NETX is not set
++# CONFIG_ARCH_H720X is not set
++# CONFIG_ARCH_IMX is not set
++# CONFIG_ARCH_IOP13XX is not set
++# CONFIG_ARCH_IOP32X is not set
++# CONFIG_ARCH_IOP33X is not set
++# CONFIG_ARCH_IXP23XX is not set
++# CONFIG_ARCH_IXP2000 is not set
++# CONFIG_ARCH_IXP4XX is not set
++# CONFIG_ARCH_L7200 is not set
++# CONFIG_ARCH_KIRKWOOD is not set
++# CONFIG_ARCH_KS8695 is not set
++# CONFIG_ARCH_NS9XXX is not set
++# CONFIG_ARCH_LOKI is not set
++# CONFIG_ARCH_MV78XX0 is not set
++# CONFIG_ARCH_MXC is not set
++# CONFIG_ARCH_ORION5X is not set
++# CONFIG_ARCH_PNX4008 is not set
++# CONFIG_ARCH_PXA is not set
++# CONFIG_ARCH_RPC is not set
++# CONFIG_ARCH_SA1100 is not set
++# CONFIG_ARCH_S3C2410 is not set
++# CONFIG_ARCH_S3C64XX is not set
++# CONFIG_ARCH_SHARK is not set
++# CONFIG_ARCH_LH7A40X is not set
++# CONFIG_ARCH_DAVINCI is not set
++CONFIG_ARCH_OMAP=y
++# CONFIG_ARCH_MSM is not set
++# CONFIG_ARCH_W90X900 is not set
++
++#
++# TI OMAP Implementations
++#
++CONFIG_ARCH_OMAP_OTG=y
++# CONFIG_ARCH_OMAP1 is not set
++# CONFIG_ARCH_OMAP2 is not set
++CONFIG_ARCH_OMAP3=y
++
++#
++# OMAP Feature Selections
++#
++# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
++# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
++# CONFIG_OMAP_SMARTREFLEX is not set
++# CONFIG_OMAP_RESET_CLOCKS is not set
++CONFIG_OMAP_BOOT_TAG=y
++CONFIG_OMAP_BOOT_REASON=y
++# CONFIG_OMAP_COMPONENT_VERSION is not set
++# CONFIG_OMAP_GPIO_SWITCH is not set
++# CONFIG_OMAP_MUX is not set
++# CONFIG_OMAP_MCBSP is not set
++# CONFIG_OMAP_MBOX_FWK is not set
++# CONFIG_OMAP_MPU_TIMER is not set
++CONFIG_OMAP_32K_TIMER=y
++CONFIG_OMAP_32K_TIMER_HZ=128
++CONFIG_OMAP_TICK_GPTIMER=12
++CONFIG_OMAP_DM_TIMER=y
++# CONFIG_OMAP_LL_DEBUG_UART1 is not set
++# CONFIG_OMAP_LL_DEBUG_UART2 is not set
++CONFIG_OMAP_LL_DEBUG_UART3=y
++CONFIG_ARCH_OMAP34XX=y
++CONFIG_ARCH_OMAP3430=y
++
++#
++# OMAP Board Type
++#
++# CONFIG_MACH_NOKIA_RX51 is not set
++# CONFIG_MACH_OMAP_LDP is not set
++# CONFIG_MACH_OMAP_3430SDP is not set
++# CONFIG_MACH_OMAP3EVM is not set
++CONFIG_MACH_OMAP3_BEAGLE=y
++# CONFIG_MACH_OVERO is not set
++# CONFIG_MACH_OMAP3_PANDORA is not set
++
++#
++# Processor Type
++#
++CONFIG_CPU_32=y
++CONFIG_CPU_32v6K=y
++CONFIG_CPU_V7=y
++CONFIG_CPU_32v7=y
++CONFIG_CPU_ABRT_EV7=y
++CONFIG_CPU_PABRT_IFAR=y
++CONFIG_CPU_CACHE_V7=y
++CONFIG_CPU_CACHE_VIPT=y
++CONFIG_CPU_COPY_V6=y
++CONFIG_CPU_TLB_V7=y
++CONFIG_CPU_HAS_ASID=y
++CONFIG_CPU_CP15=y
++CONFIG_CPU_CP15_MMU=y
++
++#
++# Processor Features
++#
++CONFIG_ARM_THUMB=y
++# CONFIG_ARM_THUMBEE is not set
++# CONFIG_CPU_ICACHE_DISABLE is not set
++# CONFIG_CPU_DCACHE_DISABLE is not set
++# CONFIG_CPU_BPREDICT_DISABLE is not set
++CONFIG_HAS_TLS_REG=y
++# CONFIG_OUTER_CACHE is not set
++
++#
++# Bus support
++#
++# CONFIG_PCI_SYSCALL is not set
++# CONFIG_ARCH_SUPPORTS_MSI is not set
++# CONFIG_PCCARD is not set
++
++#
++# Kernel Features
++#
++CONFIG_TICK_ONESHOT=y
++CONFIG_NO_HZ=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
++CONFIG_VMSPLIT_3G=y
++# CONFIG_VMSPLIT_2G is not set
++# CONFIG_VMSPLIT_1G is not set
++CONFIG_PAGE_OFFSET=0xC0000000
++# CONFIG_PREEMPT is not set
++CONFIG_HZ=128
++CONFIG_AEABI=y
++CONFIG_OABI_COMPAT=y
++CONFIG_ARCH_FLATMEM_HAS_HOLES=y
++# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
++# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
++CONFIG_SELECT_MEMORY_MODEL=y
++CONFIG_FLATMEM_MANUAL=y
++# CONFIG_DISCONTIGMEM_MANUAL is not set
++# CONFIG_SPARSEMEM_MANUAL is not set
++CONFIG_FLATMEM=y
++CONFIG_FLAT_NODE_MEM_MAP=y
++CONFIG_PAGEFLAGS_EXTENDED=y
++CONFIG_SPLIT_PTLOCK_CPUS=4
++# CONFIG_PHYS_ADDR_T_64BIT is not set
++CONFIG_ZONE_DMA_FLAG=0
++CONFIG_VIRT_TO_BUS=y
++CONFIG_UNEVICTABLE_LRU=y
++# CONFIG_LEDS is not set
++CONFIG_ALIGNMENT_TRAP=y
++
++#
++# Boot options
++#
++CONFIG_ZBOOT_ROM_TEXT=0x0
++CONFIG_ZBOOT_ROM_BSS=0x0
++CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
++# CONFIG_XIP_KERNEL is not set
++# CONFIG_KEXEC is not set
++
++#
++# CPU Power Management
++#
++# CONFIG_CPU_FREQ is not set
++# CONFIG_CPU_IDLE is not set
++
++#
++# Floating point emulation
++#
++
++#
++# At least one emulation must be selected
++#
++CONFIG_FPE_NWFPE=y
++# CONFIG_FPE_NWFPE_XP is not set
++# CONFIG_FPE_FASTFPE is not set
++CONFIG_VFP=y
++CONFIG_VFPv3=y
++# CONFIG_NEON is not set
++
++#
++# Userspace binary formats
++#
++CONFIG_BINFMT_ELF=y
++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
++CONFIG_HAVE_AOUT=y
++# CONFIG_BINFMT_AOUT is not set
++CONFIG_BINFMT_MISC=y
++
++#
++# Power management options
++#
++CONFIG_PM=y
++CONFIG_PM_DEBUG=y
++# CONFIG_PM_VERBOSE is not set
++# CONFIG_SUSPEND is not set
++# CONFIG_APM_EMULATION is not set
++CONFIG_ARCH_SUSPEND_POSSIBLE=y
++CONFIG_NET=y
++
++#
++# Networking options
++#
++CONFIG_COMPAT_NET_DEV_OPS=y
++CONFIG_PACKET=y
++# CONFIG_PACKET_MMAP is not set
++CONFIG_UNIX=y
++CONFIG_XFRM=y
++# CONFIG_XFRM_USER is not set
++# CONFIG_XFRM_SUB_POLICY is not set
++# CONFIG_XFRM_MIGRATE is not set
++# CONFIG_XFRM_STATISTICS is not set
++CONFIG_NET_KEY=y
++# CONFIG_NET_KEY_MIGRATE is not set
++CONFIG_INET=y
++# CONFIG_IP_MULTICAST is not set
++# CONFIG_IP_ADVANCED_ROUTER is not set
++CONFIG_IP_FIB_HASH=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++CONFIG_IP_PNP_BOOTP=y
++CONFIG_IP_PNP_RARP=y
++# CONFIG_NET_IPIP is not set
++# CONFIG_NET_IPGRE is not set
++# CONFIG_ARPD is not set
++# CONFIG_SYN_COOKIES is not set
++# CONFIG_INET_AH is not set
++# CONFIG_INET_ESP is not set
++# CONFIG_INET_IPCOMP is not set
++# CONFIG_INET_XFRM_TUNNEL is not set
++# CONFIG_INET_TUNNEL is not set
++CONFIG_INET_XFRM_MODE_TRANSPORT=y
++CONFIG_INET_XFRM_MODE_TUNNEL=y
++CONFIG_INET_XFRM_MODE_BEET=y
++# CONFIG_INET_LRO is not set
++CONFIG_INET_DIAG=y
++CONFIG_INET_TCP_DIAG=y
++# CONFIG_TCP_CONG_ADVANCED is not set
++CONFIG_TCP_CONG_CUBIC=y
++CONFIG_DEFAULT_TCP_CONG="cubic"
++# CONFIG_TCP_MD5SIG is not set
++# CONFIG_IPV6 is not set
++# CONFIG_NETWORK_SECMARK is not set
++# CONFIG_NETFILTER is not set
++# CONFIG_IP_DCCP is not set
++# CONFIG_IP_SCTP is not set
++# CONFIG_TIPC is not set
++# CONFIG_ATM is not set
++# CONFIG_BRIDGE is not set
++# CONFIG_NET_DSA is not set
++# CONFIG_VLAN_8021Q is not set
++# CONFIG_DECNET is not set
++# CONFIG_LLC2 is not set
++# CONFIG_IPX is not set
++# CONFIG_ATALK is not set
++# CONFIG_X25 is not set
++# CONFIG_LAPB is not set
++# CONFIG_ECONET is not set
++# CONFIG_WAN_ROUTER is not set
++# CONFIG_NET_SCHED is not set
++# CONFIG_DCB is not set
++
++#
++# Network testing
++#
++# CONFIG_NET_PKTGEN is not set
++# CONFIG_HAMRADIO is not set
++# CONFIG_CAN is not set
++# CONFIG_IRDA is not set
++# CONFIG_BT is not set
++# CONFIG_AF_RXRPC is not set
++# CONFIG_PHONET is not set
++CONFIG_WIRELESS=y
++# CONFIG_CFG80211 is not set
++CONFIG_WIRELESS_OLD_REGULATORY=y
++# CONFIG_WIRELESS_EXT is not set
++# CONFIG_LIB80211 is not set
++# CONFIG_MAC80211 is not set
++# CONFIG_WIMAX is not set
++# CONFIG_RFKILL is not set
++# CONFIG_NET_9P is not set
++
++#
++# Device Drivers
++#
++
++#
++# Generic Driver Options
++#
++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
++CONFIG_STANDALONE=y
++CONFIG_PREVENT_FIRMWARE_BUILD=y
++# CONFIG_FW_LOADER is not set
++# CONFIG_DEBUG_DRIVER is not set
++# CONFIG_DEBUG_DEVRES is not set
++# CONFIG_SYS_HYPERVISOR is not set
++# CONFIG_CONNECTOR is not set
++CONFIG_MTD=y
++# CONFIG_MTD_DEBUG is not set
++# CONFIG_MTD_CONCAT is not set
++CONFIG_MTD_PARTITIONS=y
++# CONFIG_MTD_TESTS is not set
++# CONFIG_MTD_REDBOOT_PARTS is not set
++# CONFIG_MTD_CMDLINE_PARTS is not set
++# CONFIG_MTD_AFS_PARTS is not set
++# CONFIG_MTD_AR7_PARTS is not set
++
++#
++# User Modules And Translation Layers
++#
++CONFIG_MTD_CHAR=y
++CONFIG_MTD_BLKDEVS=y
++CONFIG_MTD_BLOCK=y
++# CONFIG_FTL is not set
++# CONFIG_NFTL is not set
++# CONFIG_INFTL is not set
++# CONFIG_RFD_FTL is not set
++# CONFIG_SSFDC is not set
++# CONFIG_MTD_OOPS is not set
++
++#
++# RAM/ROM/Flash chip drivers
++#
++# CONFIG_MTD_CFI is not set
++# CONFIG_MTD_JEDECPROBE is not set
++CONFIG_MTD_MAP_BANK_WIDTH_1=y
++CONFIG_MTD_MAP_BANK_WIDTH_2=y
++CONFIG_MTD_MAP_BANK_WIDTH_4=y
++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
++CONFIG_MTD_CFI_I1=y
++CONFIG_MTD_CFI_I2=y
++# CONFIG_MTD_CFI_I4 is not set
++# CONFIG_MTD_CFI_I8 is not set
++# CONFIG_MTD_RAM is not set
++# CONFIG_MTD_ROM is not set
++# CONFIG_MTD_ABSENT is not set
++
++#
++# Mapping drivers for chip access
++#
++# CONFIG_MTD_COMPLEX_MAPPINGS is not set
++# CONFIG_MTD_PLATRAM is not set
++
++#
++# Self-contained MTD device drivers
++#
++# CONFIG_MTD_SLRAM is not set
++# CONFIG_MTD_PHRAM is not set
++# CONFIG_MTD_MTDRAM is not set
++# CONFIG_MTD_BLOCK2MTD is not set
++
++#
++# Disk-On-Chip Device Drivers
++#
++# CONFIG_MTD_DOC2000 is not set
++# CONFIG_MTD_DOC2001 is not set
++# CONFIG_MTD_DOC2001PLUS is not set
++CONFIG_MTD_NAND=y
++# CONFIG_MTD_NAND_VERIFY_WRITE is not set
++# CONFIG_MTD_NAND_ECC_SMC is not set
++# CONFIG_MTD_NAND_MUSEUM_IDS is not set
++# CONFIG_MTD_NAND_GPIO is not set
++CONFIG_MTD_NAND_OMAP2=y
++CONFIG_MTD_NAND_IDS=y
++# CONFIG_MTD_NAND_DISKONCHIP is not set
++# CONFIG_MTD_NAND_NANDSIM is not set
++# CONFIG_MTD_NAND_PLATFORM is not set
++# CONFIG_MTD_ONENAND is not set
++
++#
++# LPDDR flash memory drivers
++#
++# CONFIG_MTD_LPDDR is not set
++# CONFIG_MTD_QINFO_PROBE is not set
++
++#
++# UBI - Unsorted block images
++#
++# CONFIG_MTD_UBI is not set
++# CONFIG_PARPORT is not set
++CONFIG_BLK_DEV=y
++# CONFIG_BLK_DEV_COW_COMMON is not set
++CONFIG_BLK_DEV_LOOP=y
++# CONFIG_BLK_DEV_CRYPTOLOOP is not set
++# CONFIG_BLK_DEV_NBD is not set
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=16
++CONFIG_BLK_DEV_RAM_SIZE=16384
++# CONFIG_BLK_DEV_XIP is not set
++# CONFIG_CDROM_PKTCDVD is not set
++# CONFIG_ATA_OVER_ETH is not set
++# CONFIG_MISC_DEVICES is not set
++CONFIG_HAVE_IDE=y
++# CONFIG_IDE is not set
++
++#
++# SCSI device support
++#
++# CONFIG_RAID_ATTRS is not set
++CONFIG_SCSI=y
++CONFIG_SCSI_DMA=y
++# CONFIG_SCSI_TGT is not set
++# CONFIG_SCSI_NETLINK is not set
++CONFIG_SCSI_PROC_FS=y
++
++#
++# SCSI support type (disk, tape, CD-ROM)
++#
++CONFIG_BLK_DEV_SD=y
++# CONFIG_CHR_DEV_ST is not set
++# CONFIG_CHR_DEV_OSST is not set
++# CONFIG_BLK_DEV_SR is not set
++# CONFIG_CHR_DEV_SG is not set
++# CONFIG_CHR_DEV_SCH is not set
++
++#
++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
++#
++# CONFIG_SCSI_MULTI_LUN is not set
++# CONFIG_SCSI_CONSTANTS is not set
++# CONFIG_SCSI_LOGGING is not set
++# CONFIG_SCSI_SCAN_ASYNC is not set
++CONFIG_SCSI_WAIT_SCAN=m
++
++#
++# SCSI Transports
++#
++# CONFIG_SCSI_SPI_ATTRS is not set
++# CONFIG_SCSI_FC_ATTRS is not set
++# CONFIG_SCSI_ISCSI_ATTRS is not set
++# CONFIG_SCSI_SAS_LIBSAS is not set
++# CONFIG_SCSI_SRP_ATTRS is not set
++CONFIG_SCSI_LOWLEVEL=y
++# CONFIG_ISCSI_TCP is not set
++# CONFIG_LIBFC is not set
++# CONFIG_SCSI_DEBUG is not set
++# CONFIG_SCSI_DH is not set
++# CONFIG_ATA is not set
++# CONFIG_MD is not set
++CONFIG_NETDEVICES=y
++# CONFIG_DUMMY is not set
++# CONFIG_BONDING is not set
++# CONFIG_MACVLAN is not set
++# CONFIG_EQUALIZER is not set
++# CONFIG_TUN is not set
++# CONFIG_VETH is not set
++# CONFIG_NET_ETHERNET is not set
++# CONFIG_NETDEV_1000 is not set
++# CONFIG_NETDEV_10000 is not set
++
++#
++# Wireless LAN
++#
++# CONFIG_WLAN_PRE80211 is not set
++# CONFIG_WLAN_80211 is not set
++# CONFIG_IWLWIFI_LEDS is not set
++
++#
++# Enable WiMAX (Networking options) to see the WiMAX drivers
++#
++# CONFIG_WAN is not set
++# CONFIG_PPP is not set
++# CONFIG_SLIP is not set
++# CONFIG_NETCONSOLE is not set
++# CONFIG_NETPOLL is not set
++# CONFIG_NET_POLL_CONTROLLER is not set
++# CONFIG_ISDN is not set
++
++#
++# Input device support
++#
++CONFIG_INPUT=y
++# CONFIG_INPUT_FF_MEMLESS is not set
++# CONFIG_INPUT_POLLDEV is not set
++
++#
++# Userland interfaces
++#
++# CONFIG_INPUT_MOUSEDEV is not set
++# CONFIG_INPUT_JOYDEV is not set
++# CONFIG_INPUT_EVDEV is not set
++# CONFIG_INPUT_EVBUG is not set
++
++#
++# Input Device Drivers
++#
++# CONFIG_INPUT_KEYBOARD is not set
++# CONFIG_INPUT_MOUSE is not set
++# CONFIG_INPUT_JOYSTICK is not set
++# CONFIG_INPUT_TABLET is not set
++# CONFIG_INPUT_TOUCHSCREEN is not set
++# CONFIG_INPUT_MISC is not set
++
++#
++# Hardware I/O ports
++#
++# CONFIG_SERIO is not set
++# CONFIG_GAMEPORT is not set
++
++#
++# Character devices
++#
++CONFIG_VT=y
++CONFIG_CONSOLE_TRANSLATIONS=y
++CONFIG_VT_CONSOLE=y
++CONFIG_HW_CONSOLE=y
++# CONFIG_VT_HW_CONSOLE_BINDING is not set
++CONFIG_DEVKMEM=y
++# CONFIG_SERIAL_NONSTANDARD is not set
++
++#
++# Serial drivers
++#
++CONFIG_SERIAL_8250=y
++CONFIG_SERIAL_8250_CONSOLE=y
++CONFIG_SERIAL_8250_NR_UARTS=32
++CONFIG_SERIAL_8250_RUNTIME_UARTS=4
++CONFIG_SERIAL_8250_EXTENDED=y
++CONFIG_SERIAL_8250_MANY_PORTS=y
++CONFIG_SERIAL_8250_SHARE_IRQ=y
++CONFIG_SERIAL_8250_DETECT_IRQ=y
++CONFIG_SERIAL_8250_RSA=y
++
++#
++# Non-8250 serial port support
++#
++CONFIG_SERIAL_CORE=y
++CONFIG_SERIAL_CORE_CONSOLE=y
++CONFIG_UNIX98_PTYS=y
++# CONFIG_DEVPTS_MULTIPL