rename packages/ to recipes/ per earlier agreement

See links below for more details: http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326 http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816 Signed-off-by: Denys Dmytriyenko <denis@denix.org> Acked-by: Mike Westerhof <mwester@dls.net> Acked-by: Philip Balister <philip@balister.org> Acked-by: Khem Raj <raj.khem@gmail.com> Acked-by: Marcin Juszkiewicz <hrw@openembedded.org> Acked-by: Koen Kooi <koen@openembedded.org> Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
author: Denys Dmytriyenko <denis@denix.org> 2009-03-17 14:32:59 -0400
committer: Denys Dmytriyenko <denis@denix.org> 2009-03-17 14:32:59 -0400
commit: 709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree: 37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/linux/linux-omap-2.6.26/omap3evm
parent: fa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)
13 files changed, 5810 insertions, 0 deletions
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0001-ARM-OMAP-SmartReflex-driver.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-ARM-OMAP-SmartReflex-driver.patch
new file mode 100644
index 0000000000..550a4f58be
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-ARM-OMAP-SmartReflex-driver.patch
@@ -0,0 +1,1002 @@
+From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+To: linux-omap@vger.kernel.org
+Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+Subject: [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
+Date: 	Mon,  2 Jun 2008 14:30:12 +0300
+
+The following patch set integrates TI's SmartReflex driver. SmartReflex is a
+module that adjusts OMAP3 VDD1 and VDD2 operating voltages around the nominal
+values of current operating point depending on silicon characteristics and
+operating conditions.
+
+The driver creates two sysfs entries into /sys/power/ named "sr_vdd1_autocomp"
+and "sr_vdd2_autocomp" which can be used to activate SmartReflex modules 1 and
+2.
+
+Use the following commands to enable SmartReflex:
+
+echo -n 1 > /sys/power/sr_vdd1_autocomp
+echo -n 1 > /sys/power/sr_vdd2_autocomp
+
+To disable:
+
+echo -n 0 > /sys/power/sr_vdd1_autocomp
+echo -n 0 > /sys/power/sr_vdd2_autocomp
+
+This particular patch adds the TI reference source and header files for
+SmartReflex. Only modifications include minor styling to pass checkpatch.pl
+test.
+
+Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+---
+ arch/arm/mach-omap2/smartreflex.c |  815 +++++++++++++++++++++++++++++++++++++
+ arch/arm/mach-omap2/smartreflex.h |  136 ++++++
+ 2 files changed, 951 insertions(+), 0 deletions(-)
+ create mode 100644 arch/arm/mach-omap2/smartreflex.c
+ create mode 100644 arch/arm/mach-omap2/smartreflex.h
+
+diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
+new file mode 100644
+index 0000000..dae7460
+--- /dev/null
++++ b/arch/arm/mach-omap2/smartreflex.c
+@@ -0,0 +1,815 @@
++/*
++ * linux/arch/arm/mach-omap3/smartreflex.c
++ *
++ * OMAP34XX SmartReflex Voltage Control
++ *
++ * Copyright (C) 2007 Texas Instruments, Inc.
++ * Lesly A M <x0080970@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/clk.h>
++#include <linux/sysfs.h>
++
++#include <asm/arch/prcm.h>
++#include <asm/arch/power_companion.h>
++#include <linux/io.h>
++
++#include "prcm-regs.h"
++#include "smartreflex.h"
++
++
++/* #define DEBUG_SR 1 */
++#ifdef DEBUG_SR
++#  define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__ ,\
++									## args)
++#else
++#  define DPRINTK(fmt, args...)
++#endif
++
++struct omap_sr{
++	int srid;
++	int is_sr_reset;
++	int is_autocomp_active;
++	struct clk *fck;
++	u32 req_opp_no;
++	u32 opp1_nvalue, opp2_nvalue, opp3_nvalue, opp4_nvalue, opp5_nvalue;
++	u32 senp_mod, senn_mod;
++	u32 srbase_addr;
++	u32 vpbase_addr;
++};
++
++static struct omap_sr sr1 = {
++	.srid = SR1,
++	.is_sr_reset = 1,
++	.is_autocomp_active = 0,
++	.srbase_addr = OMAP34XX_SR1_BASE,
++};
++
++static struct omap_sr sr2 = {
++	.srid = SR2,
++	.is_sr_reset = 1,
++	.is_autocomp_active = 0,
++	.srbase_addr = OMAP34XX_SR2_BASE,
++};
++
++static inline void sr_write_reg(struct omap_sr *sr, int offset, u32 value)
++{
++	omap_writel(value, sr->srbase_addr + offset);
++}
++
++static inline void sr_modify_reg(struct omap_sr *sr, int offset, u32 mask,
++								u32 value)
++{
++	u32 reg_val;
++
++	reg_val = omap_readl(sr->srbase_addr + offset);
++	reg_val &= ~mask;
++	reg_val |= value;
++
++	omap_writel(reg_val, sr->srbase_addr + offset);
++}
++
++static inline u32 sr_read_reg(struct omap_sr *sr, int offset)
++{
++	return omap_readl(sr->srbase_addr + offset);
++}
++
++
++#ifndef USE_EFUSE_VALUES
++static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen)
++{
++	u32 gn, rn, mul;
++
++	for (gn = 0; gn < GAIN_MAXLIMIT; gn++) {
++		mul = 1 << (gn + 8);
++		rn = mul / sensor;
++		if (rn < R_MAXLIMIT) {
++			*sengain = gn;
++			*rnsen = rn;
++		}
++	}
++}
++#endif
++
++static int sr_clk_enable(struct omap_sr *sr)
++{
++	if (clk_enable(sr->fck) != 0) {
++		printk(KERN_ERR "Could not enable sr%d_fck\n", sr->srid);
++		goto clk_enable_err;
++	}
++
++	/* set fclk- active , iclk- idle */
++	sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK,
++						SR_CLKACTIVITY_IOFF_FON);
++
++	return 0;
++
++clk_enable_err:
++	return -1;
++}
++
++static int sr_clk_disable(struct omap_sr *sr)
++{
++	/* set fclk, iclk- idle */
++	sr_modify_reg(sr, ERRCONFIG, SR_CLKACTIVITY_MASK,
++						SR_CLKACTIVITY_IOFF_FOFF);
++
++	clk_disable(sr->fck);
++	sr->is_sr_reset = 1;
++
++	return 0;
++}
++
++static void sr_set_nvalues(struct omap_sr *sr)
++{
++#ifdef USE_EFUSE_VALUES
++	u32 n1, n2;
++#else
++	u32 senpval, sennval;
++	u32 senpgain, senngain;
++	u32 rnsenp, rnsenn;
++#endif
++
++	if (sr->srid == SR1) {
++#ifdef USE_EFUSE_VALUES
++		/* Read values for VDD1 from EFUSE */
++#else
++		/* since E-Fuse Values are not available, calculating the
++		 * reciprocal of the SenN and SenP values for SR1
++		 */
++		sr->senp_mod = 0x03;        /* SenN-M5 enabled */
++		sr->senn_mod = 0x03;
++
++		/* for OPP5 */
++		senpval = 0x848 + 0x330;
++		sennval = 0xacd + 0x330;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp5_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		/* for OPP4 */
++		senpval = 0x727 + 0x2a0;
++		sennval = 0x964 + 0x2a0;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp4_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		/* for OPP3 */
++		senpval = 0x655 + 0x200;
++		sennval = 0x85b + 0x200;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp3_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		/* for OPP2 */
++		senpval = 0x3be + 0x1a0;
++		sennval = 0x506 + 0x1a0;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp2_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		/* for OPP1 */
++		senpval = 0x28c + 0x100;
++		sennval = 0x373 + 0x100;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp1_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		sr_clk_enable(sr);
++		sr_write_reg(sr, NVALUERECIPROCAL, sr->opp3_nvalue);
++		sr_clk_disable(sr);
++
++#endif
++	} else if (sr->srid == SR2) {
++#ifdef USE_EFUSE_VALUES
++		/* Read values for VDD2 from EFUSE */
++#else
++		/* since E-Fuse Values are not available, calculating the
++		 * reciprocal of the SenN and SenP values for SR2
++		 */
++		sr->senp_mod = 0x03;
++		sr->senn_mod = 0x03;
++
++		/* for OPP3 */
++		senpval = 0x579 + 0x200;
++		sennval = 0x76f + 0x200;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp3_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		/* for OPP2 */
++		senpval = 0x390 + 0x1c0;
++		sennval = 0x4f5 + 0x1c0;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp2_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++		/* for OPP1 */
++		senpval = 0x25d;
++		sennval = 0x359;
++
++		cal_reciprocal(senpval, &senpgain, &rnsenp);
++		cal_reciprocal(sennval, &senngain, &rnsenn);
++
++		sr->opp1_nvalue =
++				((senpgain << NVALUERECIPROCAL_SENPGAIN_SHIFT) |
++				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
++				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
++				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
++
++#endif
++	}
++
++}
++
++static void sr_configure_vp(int srid)
++{
++	u32 vpconfig;
++
++	if (srid == SR1) {
++		vpconfig = PRM_VP1_CONFIG_ERROROFFSET | PRM_VP1_CONFIG_ERRORGAIN
++			| PRM_VP1_CONFIG_INITVOLTAGE | PRM_VP1_CONFIG_TIMEOUTEN;
++
++		PRM_VP1_CONFIG = vpconfig;
++		PRM_VP1_VSTEPMIN = PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
++						PRM_VP1_VSTEPMIN_VSTEPMIN;
++
++		PRM_VP1_VSTEPMAX = PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
++						PRM_VP1_VSTEPMAX_VSTEPMAX;
++
++		PRM_VP1_VLIMITTO = PRM_VP1_VLIMITTO_VDDMAX |
++			PRM_VP1_VLIMITTO_VDDMIN | PRM_VP1_VLIMITTO_TIMEOUT;
++
++		PRM_VP1_CONFIG |= PRM_VP1_CONFIG_INITVDD;
++		PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_INITVDD;
++
++	} else if (srid == SR2) {
++		vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN
++			| PRM_VP2_CONFIG_INITVOLTAGE | PRM_VP2_CONFIG_TIMEOUTEN;
++
++		PRM_VP2_CONFIG = vpconfig;
++		PRM_VP2_VSTEPMIN = PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
++						PRM_VP2_VSTEPMIN_VSTEPMIN;
++
++		PRM_VP2_VSTEPMAX = PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
++						PRM_VP2_VSTEPMAX_VSTEPMAX;
++
++		PRM_VP2_VLIMITTO = PRM_VP2_VLIMITTO_VDDMAX |
++			PRM_VP2_VLIMITTO_VDDMIN | PRM_VP2_VLIMITTO_TIMEOUT;
++
++		PRM_VP2_CONFIG |= PRM_VP2_CONFIG_INITVDD;
++		PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_INITVDD;
++
++	}
++}
++
++static void sr_configure_vc(void)
++{
++	PRM_VC_SMPS_SA =
++		(R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA1_SHIFT) |
++		(R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA0_SHIFT);
++
++	PRM_VC_SMPS_VOL_RA = (R_VDD2_SR_CONTROL << PRM_VC_SMPS_VOLRA1_SHIFT) |
++				(R_VDD1_SR_CONTROL << PRM_VC_SMPS_VOLRA0_SHIFT);
++
++	PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL0_ON << PRM_VC_CMD_ON_SHIFT) |
++			(PRM_VC_CMD_VAL0_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
++			(PRM_VC_CMD_VAL0_RET << PRM_VC_CMD_RET_SHIFT) |
++			(PRM_VC_CMD_VAL0_OFF << PRM_VC_CMD_OFF_SHIFT);
++
++	PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL1_ON << PRM_VC_CMD_ON_SHIFT) |
++			(PRM_VC_CMD_VAL1_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
++			(PRM_VC_CMD_VAL1_RET << PRM_VC_CMD_RET_SHIFT) |
++			(PRM_VC_CMD_VAL1_OFF << PRM_VC_CMD_OFF_SHIFT);
++
++	PRM_VC_CH_CONF = PRM_VC_CH_CONF_CMD1 | PRM_VC_CH_CONF_RAV1;
++
++	PRM_VC_I2C_CFG = PRM_VC_I2C_CFG_MCODE | PRM_VC_I2C_CFG_HSEN
++							| PRM_VC_I2C_CFG_SREN;
++
++	/* Setup voltctrl and other setup times */
++#ifdef CONFIG_SYSOFFMODE
++	PRM_VOLTCTRL = PRM_VOLTCTRL_AUTO_OFF | PRM_VOLTCTRL_AUTO_RET;
++	PRM_CLKSETUP = PRM_CLKSETUP_DURATION;
++	PRM_VOLTSETUP1 = (PRM_VOLTSETUP_TIME2 << PRM_VOLTSETUP_TIME2_OFFSET) |
++			(PRM_VOLTSETUP_TIME1 << PRM_VOLTSETUP_TIME1_OFFSET);
++	PRM_VOLTOFFSET = PRM_VOLTOFFSET_DURATION;
++	PRM_VOLTSETUP2 = PRM_VOLTSETUP2_DURATION;
++#else
++	PRM_VOLTCTRL |= PRM_VOLTCTRL_AUTO_RET;
++#endif
++
++}
++
++
++static void sr_configure(struct omap_sr *sr)
++{
++	u32 sys_clk, sr_clk_length = 0;
++	u32 sr_config;
++	u32 senp_en , senn_en;
++
++	senp_en = sr->senp_mod;
++	senn_en = sr->senn_mod;
++
++	sys_clk = prcm_get_system_clock_speed();
++
++	switch (sys_clk) {
++	case 12000:
++		sr_clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
++		break;
++	case 13000:
++		sr_clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
++		break;
++	case 19200:
++		sr_clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
++		break;
++	case 26000:
++		sr_clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
++		break;
++	case 38400:
++		sr_clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
++		break;
++	default :
++		printk(KERN_ERR "Invalid sysclk value\n");
++		break;
++	}
++
++	DPRINTK(KERN_DEBUG "SR : sys clk %lu\n", sys_clk);
++	if (sr->srid == SR1) {
++		sr_config = SR1_SRCONFIG_ACCUMDATA |
++			(sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
++			SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
++			SRCONFIG_MINMAXAVG_EN |
++			(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
++			(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
++			SRCONFIG_DELAYCTRL;
++
++		sr_write_reg(sr, SRCONFIG, sr_config);
++
++		sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT |
++					SR1_AVGWEIGHT_SENNAVGWEIGHT);
++
++		sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
++			SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
++			(SR1_ERRWEIGHT | SR1_ERRMAXLIMIT | SR1_ERRMINLIMIT));
++
++	} else if (sr->srid == SR2) {
++		sr_config = SR2_SRCONFIG_ACCUMDATA |
++			(sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
++			SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
++			SRCONFIG_MINMAXAVG_EN |
++			(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
++			(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
++			SRCONFIG_DELAYCTRL;
++
++		sr_write_reg(sr, SRCONFIG, sr_config);
++
++		sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT |
++					SR2_AVGWEIGHT_SENNAVGWEIGHT);
++
++		sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
++			SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
++			(SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT));
++
++	}
++	sr->is_sr_reset = 0;
++}
++
++static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
++{
++	u32 nvalue_reciprocal, current_nvalue;
++
++	sr->req_opp_no = target_opp_no;
++
++	if (sr->srid == SR1) {
++		switch (target_opp_no) {
++		case 5:
++			nvalue_reciprocal = sr->opp5_nvalue;
++			break;
++		case 4:
++			nvalue_reciprocal = sr->opp4_nvalue;
++			break;
++		case 3:
++			nvalue_reciprocal = sr->opp3_nvalue;
++			break;
++		case 2:
++			nvalue_reciprocal = sr->opp2_nvalue;
++			break;
++		case 1:
++			nvalue_reciprocal = sr->opp1_nvalue;
++			break;
++		default:
++			nvalue_reciprocal = sr->opp3_nvalue;
++			break;
++		}
++	} else {
++		switch (target_opp_no) {
++		case 3:
++			nvalue_reciprocal = sr->opp3_nvalue;
++			break;
++		case 2:
++			nvalue_reciprocal = sr->opp2_nvalue;
++			break;
++		case 1:
++			nvalue_reciprocal = sr->opp1_nvalue;
++			break;
++		default:
++			nvalue_reciprocal = sr->opp3_nvalue;
++			break;
++		}
++	}
++
++	current_nvalue = sr_read_reg(sr, NVALUERECIPROCAL);
++
++	if (current_nvalue == nvalue_reciprocal) {
++		DPRINTK("System is already at the desired voltage level\n");
++		return;
++	}
++
++	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
++
++	/* Enable the interrupt */
++	sr_modify_reg(sr, ERRCONFIG,
++			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST),
++			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST));
++
++	if (sr->srid == SR1) {
++		/* Enable VP1 */
++		PRM_VP1_CONFIG |= PRM_VP1_CONFIG_VPENABLE;
++	} else if (sr->srid == SR2) {
++		/* Enable VP2 */
++		PRM_VP2_CONFIG |= PRM_VP2_CONFIG_VPENABLE;
++	}
++
++	/* SRCONFIG - enable SR */
++	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
++
++}
++
++static void sr_disable(struct omap_sr *sr)
++{
++	sr->is_sr_reset = 1;
++
++	/* SRCONFIG - disable SR */
++	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ~SRCONFIG_SRENABLE);
++
++	if (sr->srid == SR1) {
++		/* Enable VP1 */
++		PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
++	} else if (sr->srid == SR2) {
++		/* Enable VP2 */
++		PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
++	}
++}
++
++
++void sr_start_vddautocomap(int srid, u32 target_opp_no)
++{
++	struct omap_sr *sr = NULL;
++
++	if (srid == SR1)
++		sr = &sr1;
++	else if (srid == SR2)
++		sr = &sr2;
++
++	if (sr->is_sr_reset == 1) {
++		sr_clk_enable(sr);
++		sr_configure(sr);
++	}
++
++	if (sr->is_autocomp_active == 1)
++		DPRINTK(KERN_WARNING "SR%d: VDD autocomp is already active\n",
++									srid);
++
++	sr->is_autocomp_active = 1;
++	sr_enable(sr, target_opp_no);
++}
++EXPORT_SYMBOL(sr_start_vddautocomap);
++
++int sr_stop_vddautocomap(int srid)
++{
++	struct omap_sr *sr = NULL;
++
++	if (srid == SR1)
++		sr = &sr1;
++	else if (srid == SR2)
++		sr = &sr2;
++
++	if (sr->is_autocomp_active == 1) {
++		sr_disable(sr);
++		sr_clk_disable(sr);
++		sr->is_autocomp_active = 0;
++		return SR_TRUE;
++	} else {
++		DPRINTK(KERN_WARNING "SR%d: VDD autocomp is not active\n",
++								srid);
++		return SR_FALSE;
++	}
++
++}
++EXPORT_SYMBOL(sr_stop_vddautocomap);
++
++void enable_smartreflex(int srid)
++{
++	u32 target_opp_no = 0;
++	struct omap_sr *sr = NULL;
++
++	if (srid == SR1)
++		sr = &sr1;
++	else if (srid == SR2)
++		sr = &sr2;
++
++	if (sr->is_autocomp_active == 1) {
++		if (sr->is_sr_reset == 1) {
++			if (srid == SR1) {
++				/* Enable SR clks */
++				CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
++				target_opp_no = get_opp_no(current_vdd1_opp);
++
++			} else if (srid == SR2) {
++				/* Enable SR clks */
++				CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
++				target_opp_no = get_opp_no(current_vdd2_opp);
++			}
++
++			sr_configure(sr);
++
++			sr_enable(sr, target_opp_no);
++		}
++	}
++}
++
++void disable_smartreflex(int srid)
++{
++	struct omap_sr *sr = NULL;
++
++	if (srid == SR1)
++		sr = &sr1;
++	else if (srid == SR2)
++		sr = &sr2;
++
++	if (sr->is_autocomp_active == 1) {
++		if (srid == SR1) {
++			/* Enable SR clk */
++			CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
++
++		} else if (srid == SR2) {
++			/* Enable SR clk */
++			CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
++		}
++
++		if (sr->is_sr_reset == 0) {
++
++			sr->is_sr_reset = 1;
++			/* SRCONFIG - disable SR */
++			sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE,
++							~SRCONFIG_SRENABLE);
++
++			if (sr->srid == SR1) {
++				/* Disable SR clk */
++				CM_FCLKEN_WKUP &= ~SR1_CLK_ENABLE;
++				/* Enable VP1 */
++				PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
++
++			} else if (sr->srid == SR2) {
++				/* Disable SR clk */
++				CM_FCLKEN_WKUP &= ~SR2_CLK_ENABLE;
++				/* Enable VP2 */
++				PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
++			}
++		}
++	}
++}
++
++
++/* Voltage Scaling using SR VCBYPASS */
++int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
++{
++	int ret;
++	int sr_status = 0;
++	u32 vdd, target_opp_no;
++	u32 vc_bypass_value;
++	u32 reg_addr = 0;
++	u32 loop_cnt = 0, retries_cnt = 0;
++
++	vdd = get_vdd(target_opp);
++	target_opp_no = get_opp_no(target_opp);
++
++	if (vdd == PRCM_VDD1) {
++		sr_status = sr_stop_vddautocomap(SR1);
++
++		PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL_0 & ~PRM_VC_CMD_ON_MASK) |
++						(vsel << PRM_VC_CMD_ON_SHIFT);
++		reg_addr = R_VDD1_SR_CONTROL;
++
++	} else if (vdd == PRCM_VDD2) {
++		sr_status = sr_stop_vddautocomap(SR2);
++
++		PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL_1 & ~PRM_VC_CMD_ON_MASK) |
++						(vsel << PRM_VC_CMD_ON_SHIFT);
++		reg_addr = R_VDD2_SR_CONTROL;
++	}
++
++	vc_bypass_value = (vsel << PRM_VC_BYPASS_DATA_SHIFT) |
++			(reg_addr << PRM_VC_BYPASS_REGADDR_SHIFT) |
++			(R_SRI2C_SLAVE_ADDR << PRM_VC_BYPASS_SLAVEADDR_SHIFT);
++
++	PRM_VC_BYPASS_VAL = vc_bypass_value;
++
++	PRM_VC_BYPASS_VAL |= PRM_VC_BYPASS_VALID;
++
++	DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, PRM_VC_BYPASS_VAL);
++	DPRINTK("PRM_IRQST_MPU %X\n", PRM_IRQSTATUS_MPU);
++
++	while ((PRM_VC_BYPASS_VAL & PRM_VC_BYPASS_VALID) != 0x0) {
++		ret = loop_wait(&loop_cnt, &retries_cnt, 10);
++		if (ret != PRCM_PASS) {
++			printk(KERN_INFO "Loop count exceeded in check SR I2C"
++								"write\n");
++			return ret;
++		}
++	}
++
++	omap_udelay(T2_SMPS_UPDATE_DELAY);
++
++	if (sr_status) {
++		if (vdd == PRCM_VDD1)
++			sr_start_vddautocomap(SR1, target_opp_no);
++		else if (vdd == PRCM_VDD2)
++			sr_start_vddautocomap(SR2, target_opp_no);
++	}
++
++	return SR_PASS;
++}
++
++/* Sysfs interface to select SR VDD1 auto compensation */
++static ssize_t omap_sr_vdd1_autocomp_show(struct kset *subsys, char *buf)
++{
++	return sprintf(buf, "%d\n", sr1.is_autocomp_active);
++}
++
++static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys,
++				const char *buf, size_t n)
++{
++	u32 current_vdd1opp_no;
++	unsigned short value;
++
++	if (sscanf(buf, "%hu", &value) != 1 || (value > 1)) {
++		printk(KERN_ERR "sr_vdd1_autocomp: Invalid value\n");
++		return -EINVAL;
++	}
++
++	current_vdd1opp_no = get_opp_no(current_vdd1_opp);
++
++	if (value == 0)
++		sr_stop_vddautocomap(SR1);
++	else
++		sr_start_vddautocomap(SR1, current_vdd1opp_no);
++
++	return n;
++}
++
++static struct subsys_attribute sr_vdd1_autocomp = {
++	.attr = {
++	.name = __stringify(sr_vdd1_autocomp),
++	.mode = 0644,
++	},
++	.show = omap_sr_vdd1_autocomp_show,
++	.store = omap_sr_vdd1_autocomp_store,
++};
++
++/* Sysfs interface to select SR VDD2 auto compensation */
++static ssize_t omap_sr_vdd2_autocomp_show(struct kset *subsys, char *buf)
++{
++	return sprintf(buf, "%d\n", sr2.is_autocomp_active);
++}
++
++static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys,
++				const char *buf, size_t n)
++{
++	u32 current_vdd2opp_no;
++	unsigned short value;
++
++	if (sscanf(buf, "%hu", &value) != 1 || (value > 1)) {
++		printk(KERN_ERR "sr_vdd2_autocomp: Invalid value\n");
++		return -EINVAL;
++	}
++
++	current_vdd2opp_no = get_opp_no(current_vdd2_opp);
++
++	if (value == 0)
++		sr_stop_vddautocomap(SR2);
++	else
++		sr_start_vddautocomap(SR2, current_vdd2opp_no);
++
++	return n;
++}
++
++static struct subsys_attribute sr_vdd2_autocomp = {
++	.attr = {
++	.name = __stringify(sr_vdd2_autocomp),
++	.mode = 0644,
++	},
++	.show = omap_sr_vdd2_autocomp_show,
++	.store = omap_sr_vdd2_autocomp_store,
++};
++
++
++
++static int __init omap3_sr_init(void)
++{
++	int ret = 0;
++	u8 RdReg;
++
++#ifdef CONFIG_ARCH_OMAP34XX
++	sr1.fck = clk_get(NULL, "sr1_fck");
++	if (IS_ERR(sr1.fck))
++		printk(KERN_ERR "Could not get sr1_fck\n");
++
++	sr2.fck = clk_get(NULL, "sr2_fck");
++	if (IS_ERR(sr2.fck))
++		printk(KERN_ERR "Could not get sr2_fck\n");
++#endif /* #ifdef CONFIG_ARCH_OMAP34XX */
++
++	/* Call the VPConfig, VCConfig, set N Values. */
++	sr_set_nvalues(&sr1);
++	sr_configure_vp(SR1);
++
++	sr_set_nvalues(&sr2);
++	sr_configure_vp(SR2);
++
++	sr_configure_vc();
++
++	/* Enable SR on T2 */
++	ret = t2_in(PM_RECEIVER, &RdReg, R_DCDC_GLOBAL_CFG);
++	RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
++	ret |= t2_out(PM_RECEIVER, RdReg, R_DCDC_GLOBAL_CFG);
++
++
++	printk(KERN_INFO "SmartReflex driver initialized\n");
++
++	ret = subsys_create_file(&power_subsys, &sr_vdd1_autocomp);
++	if (ret)
++		printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
++
++	ret = subsys_create_file(&power_subsys, &sr_vdd2_autocomp);
++	if (ret)
++		printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
++
++	return 0;
++}
++
++arch_initcall(omap3_sr_init);
+diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
+new file mode 100644
+index 0000000..62907ef
+--- /dev/null
++++ b/arch/arm/mach-omap2/smartreflex.h
+@@ -0,0 +1,136 @@
++/*
++ * linux/arch/arm/mach-omap3/smartreflex.h
++ *
++ * Copyright (C) 2007 Texas Instruments, Inc.
++ * Lesly A M <x0080970@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++
++/* SR Modules */
++#define SR1		1
++#define SR2		2
++
++#define SR_FAIL		1
++#define SR_PASS		0
++
++#define SR_TRUE		1
++#define SR_FALSE	0
++
++#define GAIN_MAXLIMIT	16
++#define R_MAXLIMIT	256
++
++#define SR1_CLK_ENABLE	(0x1 << 6)
++#define SR2_CLK_ENABLE	(0x1 << 7)
++
++/* PRM_VP1_CONFIG */
++#define PRM_VP1_CONFIG_ERROROFFSET	(0x00 << 24)
++#define PRM_VP1_CONFIG_ERRORGAIN	(0x20 << 16)
++
++#define PRM_VP1_CONFIG_INITVOLTAGE	(0x30 << 8) /* 1.2 volt */
++#define PRM_VP1_CONFIG_TIMEOUTEN	(0x1 << 3)
++#define PRM_VP1_CONFIG_INITVDD		(0x1 << 2)
++#define PRM_VP1_CONFIG_FORCEUPDATE	(0x1 << 1)
++#define PRM_VP1_CONFIG_VPENABLE		(0x1 << 0)
++
++/* PRM_VP1_VSTEPMIN */
++#define PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN	(0x01F4 << 8)
++#define PRM_VP1_VSTEPMIN_VSTEPMIN		(0x01 << 0)
++
++/* PRM_VP1_VSTEPMAX */
++#define PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX	(0x01F4 << 8)
++#define PRM_VP1_VSTEPMAX_VSTEPMAX		(0x04 << 0)
++
++/* PRM_VP1_VLIMITTO */
++#define PRM_VP1_VLIMITTO_VDDMAX		(0x3C << 24)
++#define PRM_VP1_VLIMITTO_VDDMIN		(0x0 << 16)
++#define PRM_VP1_VLIMITTO_TIMEOUT	(0xFFFF << 0)
++
++/* PRM_VP2_CONFIG */
++#define PRM_VP2_CONFIG_ERROROFFSET	(0x00 << 24)
++#define PRM_VP2_CONFIG_ERRORGAIN	(0x20 << 16)
++
++#define PRM_VP2_CONFIG_INITVOLTAGE	(0x30 << 8) /* 1.2 volt */
++#define PRM_VP2_CONFIG_TIMEOUTEN	(0x1 << 3)
++#define PRM_VP2_CONFIG_INITVDD		(0x1 << 2)
++#define PRM_VP2_CONFIG_FORCEUPDATE	(0x1 << 1)
++#define PRM_VP2_CONFIG_VPENABLE		(0x1 << 0)
++
++/* PRM_VP2_VSTEPMIN */
++#define PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN	(0x01F4 << 8)
++#define PRM_VP2_VSTEPMIN_VSTEPMIN		(0x01 << 0)
++
++/* PRM_VP2_VSTEPMAX */
++#define PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX	(0x01F4 << 8)
++#define PRM_VP2_VSTEPMAX_VSTEPMAX		(0x04 << 0)
++
++/* PRM_VP2_VLIMITTO */
++#define PRM_VP2_VLIMITTO_VDDMAX		(0x2C << 24)
++#define PRM_VP2_VLIMITTO_VDDMIN		(0x0 << 16)
++#define PRM_VP2_VLIMITTO_TIMEOUT	(0xFFFF << 0)
++
++/* SRCONFIG */
++#define SR1_SRCONFIG_ACCUMDATA		(0x1F4 << 22)
++#define SR2_SRCONFIG_ACCUMDATA		(0x1F4 << 22)
++
++#define SRCLKLENGTH_12MHZ_SYSCLK	0x3C
++#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
++#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
++#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
++#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
++
++#define SRCONFIG_SRCLKLENGTH_SHIFT	12
++#define SRCONFIG_SENNENABLE_SHIFT	5
++#define SRCONFIG_SENPENABLE_SHIFT	3
++
++#define SRCONFIG_SRENABLE		(0x01 << 11)
++#define SRCONFIG_SENENABLE		(0x01 << 10)
++#define SRCONFIG_ERRGEN_EN		(0x01 << 9)
++#define SRCONFIG_MINMAXAVG_EN		(0x01 << 8)
++
++#define SRCONFIG_DELAYCTRL		(0x01 << 2)
++#define SRCONFIG_CLKCTRL		(0x00 << 0)
++
++/* AVGWEIGHT */
++#define SR1_AVGWEIGHT_SENPAVGWEIGHT	(0x03 << 2)
++#define SR1_AVGWEIGHT_SENNAVGWEIGHT	(0x03 << 0)
++
++#define SR2_AVGWEIGHT_SENPAVGWEIGHT	(0x01 << 2)
++#define SR2_AVGWEIGHT_SENNAVGWEIGHT	(0x01 << 0)
++
++/* NVALUERECIPROCAL */
++#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
++#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
++#define NVALUERECIPROCAL_RNSENP_SHIFT	8
++#define NVALUERECIPROCAL_RNSENN_SHIFT	0
++
++/* ERRCONFIG */
++#define SR_CLKACTIVITY_MASK		(0x03 << 20)
++#define SR_ERRWEIGHT_MASK		(0x07 << 16)
++#define SR_ERRMAXLIMIT_MASK		(0xFF << 8)
++#define SR_ERRMINLIMIT_MASK		(0xFF << 0)
++
++#define SR_CLKACTIVITY_IOFF_FOFF	(0x00 << 20)
++#define SR_CLKACTIVITY_IOFF_FON		(0x02 << 20)
++
++#define ERRCONFIG_VPBOUNDINTEN		(0x1 << 31)
++#define ERRCONFIG_VPBOUNDINTST		(0x1 << 30)
++
++#define SR1_ERRWEIGHT			(0x07 << 16)
++#define SR1_ERRMAXLIMIT			(0x02 << 8)
++#define SR1_ERRMINLIMIT			(0xFA << 0)
++
++#define SR2_ERRWEIGHT			(0x07 << 16)
++#define SR2_ERRMAXLIMIT			(0x02 << 8)
++#define SR2_ERRMINLIMIT			(0xF9 << 0)
++
++extern u32 current_vdd1_opp;
++extern u32 current_vdd2_opp;
++extern struct kset power_subsys;
++
++extern inline int loop_wait(u32 *lcnt, u32 *rcnt, u32 delay);
++extern void omap_udelay(u32 udelay);
++
+-- 
+1.5.4.3
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch
new file mode 100644
index 0000000000..6e31ead2bd
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-ASoC-OMAP-Add-basic-support-for-OMAP34xx-in-McBSP.patch
@@ -0,0 +1,55 @@
+From a1dbb6dd28e9815a307b87b8d96dcf371d6cfd58 Mon Sep 17 00:00:00 2001
+From: Jarkko Nikula <jarkko.nikula@nokia.com>
+Date: Mon, 19 May 2008 13:24:41 +0300
+Subject: [PATCH] ASoC: OMAP: Add basic support for OMAP34xx in McBSP DAI driver
+
+This adds support for OMAP34xx McBSP port 1 and 2.
+
+Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
+---
+ sound/soc/omap/omap-mcbsp.c |   20 +++++++++++++++++++-
+ 1 files changed, 19 insertions(+), 1 deletions(-)
+
+diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
+index 40d87e6..8e6ec9d 100644
+--- a/sound/soc/omap/omap-mcbsp.c
++++ b/sound/soc/omap/omap-mcbsp.c
+@@ -99,6 +99,21 @@ static const unsigned long omap2420_mcbsp_port[][2] = {
+ static const int omap2420_dma_reqs[][2] = {};
+ static const unsigned long omap2420_mcbsp_port[][2] = {};
+ #endif
++#if defined(CONFIG_ARCH_OMAP34XX)
++static const int omap34xx_dma_reqs[][2] = {
++	{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
++	{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },
++};
++static const unsigned long omap34xx_mcbsp_port[][2] = {
++	{ OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DXR2,
++	  OMAP34XX_MCBSP1_BASE + OMAP_MCBSP_REG_DRR2 },
++	{ OMAP34XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR2,
++	  OMAP34XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR2 },
++};
++#else
++static const int omap34xx_dma_reqs[][2] = {};
++static const unsigned long omap34xx_mcbsp_port[][2] = {};
++#endif
+ 
+ static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream)
+ {
+@@ -169,9 +184,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
+ 	} else if (cpu_is_omap2420()) {
+ 		dma = omap2420_dma_reqs[bus_id][substream->stream];
+ 		port = omap2420_mcbsp_port[bus_id][substream->stream];
++	} else if (cpu_is_omap343x()) {
++		dma = omap34xx_dma_reqs[bus_id][substream->stream];
++		port = omap34xx_mcbsp_port[bus_id][substream->stream];
+ 	} else {
+ 		/*
+-		 * TODO: Add support for 2430 and 3430
++		 * TODO: Add support for 2430
+ 		 */
+ 		return -ENODEV;
+ 	}
+-- 
+1.5.5.1
+
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0001-omap3-cpuidle.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-omap3-cpuidle.patch
new file mode 100644
index 0000000000..cdc9447b4c
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-omap3-cpuidle.patch
@@ -0,0 +1,450 @@
+From: "Rajendra Nayak" <rnayak@ti.com>
+To: <linux-omap@vger.kernel.org>
+Subject: [PATCH 01/02] OMAP3 CPUidle driver
+Date: 	Tue, 10 Jun 2008 12:39:00 +0530
+
+This patch adds the OMAP3 cpuidle driver. Irq enable/disable is done in the core cpuidle driver
+before it queries the governor for the next state.
+
+Signed-off-by: Rajendra Nayak <rnayak@ti.com>   
+
+---
+ arch/arm/mach-omap2/Makefile      |    2 
+ arch/arm/mach-omap2/cpuidle34xx.c |  293 ++++++++++++++++++++++++++++++++++++++
+ arch/arm/mach-omap2/cpuidle34xx.h |   51 ++++++
+ arch/arm/mach-omap2/pm34xx.c      |    5 
+ drivers/cpuidle/cpuidle.c         |   10 +
+ 5 files changed, 359 insertions(+), 2 deletions(-)
+
+Index: linux-omap-2.6/arch/arm/mach-omap2/Makefile
+===================================================================
+--- linux-omap-2.6.orig/arch/arm/mach-omap2/Makefile	2008-06-09 20:15:33.855303920 +0530
++++ linux-omap-2.6/arch/arm/mach-omap2/Makefile	2008-06-09 20:15:39.569121361 +0530
+@@ -20,7 +20,7 @@ obj-y					+= pm.o
+ obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
+ obj-$(CONFIG_ARCH_OMAP2420)		+= sleep242x.o
+ obj-$(CONFIG_ARCH_OMAP2430)		+= sleep243x.o
+-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
++obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
+ obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+ endif
+ 
+Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c	2008-06-10 11:41:27.644820323 +0530
+@@ -0,0 +1,293 @@
++/*
++ * linux/arch/arm/mach-omap2/cpuidle34xx.c
++ *
++ * OMAP3 CPU IDLE Routines
++ *
++ * Copyright (C) 2007-2008 Texas Instruments, Inc.
++ * Rajendra Nayak <rnayak@ti.com>
++ *
++ * Copyright (C) 2007 Texas Instruments, Inc.
++ * Karthik Dasu <karthik-dp@ti.com>
++ *
++ * Copyright (C) 2006 Nokia Corporation
++ * Tony Lindgren <tony@atomide.com>
++ *
++ * Copyright (C) 2005 Texas Instruments, Inc.
++ * Richard Woodruff <r-woodruff2@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/cpuidle.h>
++#include <asm/arch/pm.h>
++#include <asm/arch/prcm.h>
++#include <asm/arch/powerdomain.h>
++#include <asm/arch/clockdomain.h>
++#include <asm/arch/irqs.h>
++#include "cpuidle34xx.h"
++
++#ifdef CONFIG_CPU_IDLE
++
++struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
++struct omap3_processor_cx current_cx_state;
++
++static int omap3_idle_bm_check(void)
++{
++	/* Check for omap3_fclks_active() here once available */
++	return 0;
++}
++
++/* omap3_enter_idle - Programs OMAP3 to enter the specified state.
++ * returns the total time during which the system was idle.
++ */
++static int omap3_enter_idle(struct cpuidle_device *dev,
++			struct cpuidle_state *state)
++{
++	struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
++	struct timespec ts_preidle, ts_postidle, ts_idle;
++	struct powerdomain *mpu_pd, *core_pd, *per_pd, *neon_pd;
++	int neon_pwrst;
++
++	current_cx_state = *cx;
++
++	if (cx->type == OMAP3_STATE_C0) {
++		/* Do nothing for C0, not even a wfi */
++		return 0;
++	}
++
++	/* Used to keep track of the total time in idle */
++	getnstimeofday(&ts_preidle);
++
++	mpu_pd = pwrdm_lookup("mpu_pwrdm");
++	core_pd = pwrdm_lookup("core_pwrdm");
++	per_pd = pwrdm_lookup("per_pwrdm");
++	neon_pd = pwrdm_lookup("neon_pwrdm");
++
++	/* Reset previous power state registers */
++	pwrdm_clear_all_prev_pwrst(mpu_pd);
++	pwrdm_clear_all_prev_pwrst(neon_pd);
++	pwrdm_clear_all_prev_pwrst(core_pd);
++	pwrdm_clear_all_prev_pwrst(per_pd);
++
++	if (omap_irq_pending())
++		return 0;
++
++	neon_pwrst = pwrdm_read_pwrst(neon_pd);
++
++	/* Program MPU/NEON to target state */
++	if (cx->mpu_state < PWRDM_POWER_ON) {
++		if (neon_pwrst == PWRDM_POWER_ON) {
++                        if (cx->mpu_state == PWRDM_POWER_RET)
++                                pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_RET);
++                        else if (cx->mpu_state == PWRDM_POWER_OFF)
++                                pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_OFF);
++		}
++		pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
++	}
++
++	/* Program CORE to target state */
++	if (cx->core_state < PWRDM_POWER_ON)
++		pwrdm_set_next_pwrst(core_pd, cx->core_state);
++
++	/* Execute ARM wfi */
++	omap_sram_idle();
++
++	/* Program MPU/NEON to ON */
++	if (cx->mpu_state < PWRDM_POWER_ON) {
++		if (neon_pwrst == PWRDM_POWER_ON)
++			pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_ON);
++		pwrdm_set_next_pwrst(mpu_pd, PWRDM_POWER_ON);
++	}
++
++	if (cx->core_state < PWRDM_POWER_ON)
++		pwrdm_set_next_pwrst(core_pd, PWRDM_POWER_ON);
++
++	getnstimeofday(&ts_postidle);
++	ts_idle = timespec_sub(ts_postidle, ts_preidle);
++	return timespec_to_ns(&ts_idle);
++}
++
++/*
++ * omap3_enter_idle_bm - enter function for states with CPUIDLE_FLAG_CHECK_BM
++ *
++ * This function checks for all the pre-requisites needed for OMAP3 to enter
++ * CORE RET/OFF state. It then calls omap3_enter_idle to program the desired
++ * C state.
++ */
++static int omap3_enter_idle_bm(struct cpuidle_device *dev,
++			       struct cpuidle_state *state)
++{
++	struct cpuidle_state *new_state = NULL;
++	int i, j;
++
++	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
++
++		/* Find current state in list */
++		for (i = 0; i < OMAP3_MAX_STATES; i++)
++			if (state == &dev->states[i])
++				break;
++		BUG_ON(i == OMAP3_MAX_STATES);
++
++		/* Back up to non 'CHECK_BM' state */
++		for (j = i - 1;  j > 0; j--) {
++			struct cpuidle_state *s = &dev->states[j];
++
++			if (!(s->flags & CPUIDLE_FLAG_CHECK_BM)) {
++				new_state = s;
++				break;
++			}
++		}
++
++		pr_debug("%s: Bus activity: Entering %s (instead of %s)\n",
++			__FUNCTION__, new_state->name, state->name);
++	}
++
++	return omap3_enter_idle(dev, new_state ? : state);
++}
++
++DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
++
++/* omap3_init_power_states - Initialises the OMAP3 specific C states.
++ * Below is the desciption of each C state.
++ *
++	C0 . System executing code
++	C1 . MPU WFI + Core active
++	C2 . MPU CSWR + Core active
++	C3 . MPU OFF + Core active
++	C4 . MPU CSWR + Core CSWR
++	C5 . MPU OFF + Core CSWR
++	C6 . MPU OFF + Core OFF
++ */
++void omap_init_power_states(void)
++{
++	/* C0 . System executing code */
++	omap3_power_states[0].valid = 1;
++	omap3_power_states[0].type = OMAP3_STATE_C0;
++	omap3_power_states[0].sleep_latency = 0;
++	omap3_power_states[0].wakeup_latency = 0;
++	omap3_power_states[0].threshold = 0;
++	omap3_power_states[0].mpu_state = PWRDM_POWER_ON;
++	omap3_power_states[0].core_state = PWRDM_POWER_ON;
++	omap3_power_states[0].flags = CPUIDLE_FLAG_TIME_VALID |
++				CPUIDLE_FLAG_SHALLOW;
++
++	/* C1 . MPU WFI + Core active */
++	omap3_power_states[1].valid = 1;
++	omap3_power_states[1].type = OMAP3_STATE_C1;
++	omap3_power_states[1].sleep_latency = 10;
++	omap3_power_states[1].wakeup_latency = 10;
++	omap3_power_states[1].threshold = 30;
++	omap3_power_states[1].mpu_state = PWRDM_POWER_ON;
++	omap3_power_states[1].core_state = PWRDM_POWER_ON;
++	omap3_power_states[1].flags = CPUIDLE_FLAG_TIME_VALID |
++				CPUIDLE_FLAG_SHALLOW;
++
++	/* C2 . MPU CSWR + Core active */
++	omap3_power_states[2].valid = 1;
++	omap3_power_states[2].type = OMAP3_STATE_C2;
++	omap3_power_states[2].sleep_latency = 50;
++	omap3_power_states[2].wakeup_latency = 50;
++	omap3_power_states[2].threshold = 300;
++	omap3_power_states[2].mpu_state = PWRDM_POWER_RET;
++	omap3_power_states[2].core_state = PWRDM_POWER_ON;
++	omap3_power_states[2].flags = CPUIDLE_FLAG_TIME_VALID |
++				CPUIDLE_FLAG_BALANCED;
++
++	/* C3 . MPU OFF + Core active */
++	omap3_power_states[3].valid = 0;
++	omap3_power_states[3].type = OMAP3_STATE_C3;
++	omap3_power_states[3].sleep_latency = 1500;
++	omap3_power_states[3].wakeup_latency = 1800;
++	omap3_power_states[3].threshold = 4000;
++	omap3_power_states[3].mpu_state = PWRDM_POWER_OFF;
++	omap3_power_states[3].core_state = PWRDM_POWER_RET;
++	omap3_power_states[3].flags = CPUIDLE_FLAG_TIME_VALID |
++				CPUIDLE_FLAG_BALANCED;
++
++	/* C4 . MPU CSWR + Core CSWR*/
++	omap3_power_states[4].valid = 1;
++	omap3_power_states[4].type = OMAP3_STATE_C4;
++	omap3_power_states[4].sleep_latency = 2500;
++	omap3_power_states[4].wakeup_latency = 7500;
++	omap3_power_states[4].threshold = 12000;
++	omap3_power_states[4].mpu_state = PWRDM_POWER_RET;
++	omap3_power_states[4].core_state = PWRDM_POWER_RET;
++	omap3_power_states[4].flags = CPUIDLE_FLAG_TIME_VALID |
++			CPUIDLE_FLAG_BALANCED | CPUIDLE_FLAG_CHECK_BM;
++
++	/* C5 . MPU OFF + Core CSWR */
++	omap3_power_states[5].valid = 0;
++	omap3_power_states[5].type = OMAP3_STATE_C5;
++	omap3_power_states[5].sleep_latency = 3000;
++	omap3_power_states[5].wakeup_latency = 8500;
++	omap3_power_states[5].threshold = 15000;
++	omap3_power_states[5].mpu_state = PWRDM_POWER_OFF;
++	omap3_power_states[5].core_state = PWRDM_POWER_RET;
++	omap3_power_states[5].flags = CPUIDLE_FLAG_TIME_VALID |
++			CPUIDLE_FLAG_BALANCED | CPUIDLE_FLAG_CHECK_BM;
++
++	/* C6 . MPU OFF + Core OFF */
++	omap3_power_states[6].valid = 0;
++	omap3_power_states[6].type = OMAP3_STATE_C6;
++	omap3_power_states[6].sleep_latency = 10000;
++	omap3_power_states[6].wakeup_latency = 30000;
++	omap3_power_states[6].threshold = 300000;
++	omap3_power_states[6].mpu_state = PWRDM_POWER_OFF;
++	omap3_power_states[6].core_state = PWRDM_POWER_OFF;
++	omap3_power_states[6].flags = CPUIDLE_FLAG_TIME_VALID |
++			CPUIDLE_FLAG_DEEP | CPUIDLE_FLAG_CHECK_BM;
++}
++
++struct cpuidle_driver omap3_idle_driver = {
++	.name = 	"omap3_idle",
++	.owner = 	THIS_MODULE,
++};
++/*
++ * omap3_idle_init - Init routine for OMAP3 idle.
++ * Registers the OMAP3 specific cpuidle driver with the cpuidle f/w
++ * with the valid set of states.
++ */
++int omap3_idle_init(void)
++{
++	int i, count = 0;
++	struct omap3_processor_cx *cx;
++	struct cpuidle_state *state;
++	struct cpuidle_device *dev;
++
++	omap_init_power_states();
++	cpuidle_register_driver(&omap3_idle_driver);
++
++	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
++
++	for (i = 0; i < OMAP3_MAX_STATES; i++) {
++		cx = &omap3_power_states[i];
++		state = &dev->states[count];
++
++		if (!cx->valid)
++			continue;
++		cpuidle_set_statedata(state, cx);
++		state->exit_latency = cx->sleep_latency + cx->wakeup_latency;
++		state->target_residency = cx->threshold;
++		state->flags = cx->flags;
++		state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ?
++			omap3_enter_idle_bm : omap3_enter_idle;
++		sprintf(state->name, "C%d", count+1);
++		count++;
++	}
++
++	if (!count)
++		return -EINVAL;
++	dev->state_count = count;
++
++	if (cpuidle_register_device(dev)) {
++		printk(KERN_ERR "%s: CPUidle register device failed\n",
++		       __FUNCTION__);
++		return -EIO;
++	}
++
++	return 0;
++}
++__initcall(omap3_idle_init);
++#endif /* CONFIG_CPU_IDLE */
+Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.h	2008-06-09 20:15:39.569121361 +0530
+@@ -0,0 +1,51 @@
++/*
++ * linux/arch/arm/mach-omap2/cpuidle34xx.h
++ *
++ * OMAP3 cpuidle structure definitions
++ *
++ * Copyright (C) 2007-2008 Texas Instruments, Inc.
++ * Written by Rajendra Nayak <rnayak@ti.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ *
++ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
++ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
++ *
++ * History:
++ *
++ */
++
++#ifndef ARCH_ARM_MACH_OMAP2_CPUIDLE_34XX
++#define ARCH_ARM_MACH_OMAP2_CPUIDLE_34XX
++
++#define OMAP3_MAX_STATES 7
++#define OMAP3_STATE_C0 0 /* C0 - System executing code */
++#define OMAP3_STATE_C1 1 /* C1 - MPU WFI + Core active */
++#define OMAP3_STATE_C2 2 /* C2 - MPU CSWR + Core active */
++#define OMAP3_STATE_C3 3 /* C3 - MPU OFF + Core active */
++#define OMAP3_STATE_C4 4 /* C4 - MPU RET + Core RET */
++#define OMAP3_STATE_C5 5 /* C5 - MPU OFF + Core RET */
++#define OMAP3_STATE_C6 6 /* C6 - MPU OFF + Core OFF */
++
++extern void omap_sram_idle(void);
++extern int omap3_irq_pending(void);
++
++struct omap3_processor_cx {
++	u8 valid;
++	u8 type;
++	u32 sleep_latency;
++	u32 wakeup_latency;
++	u32 mpu_state;
++	u32 core_state;
++	u32 threshold;
++	u32 flags;
++};
++
++void omap_init_power_states(void);
++int omap3_idle_init(void);
++
++#endif /* ARCH_ARM_MACH_OMAP2_CPUIDLE_34XX */
++
+Index: linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c
+===================================================================
+--- linux-omap-2.6.orig/arch/arm/mach-omap2/pm34xx.c	2008-06-09 20:15:33.855303920 +0530
++++ linux-omap-2.6/arch/arm/mach-omap2/pm34xx.c	2008-06-09 20:16:20.976798343 +0530
+@@ -141,7 +141,7 @@ static irqreturn_t prcm_interrupt_handle
+ 	return IRQ_HANDLED;
+ }
+ 
+-static void omap_sram_idle(void)
++void omap_sram_idle(void)
+ {
+ 	/* Variable to tell what needs to be saved and restored
+ 	 * in omap_sram_idle*/
+@@ -156,6 +156,7 @@ static void omap_sram_idle(void)
+ 
+ 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ 	switch (mpu_next_state) {
++	case PWRDM_POWER_ON:
+ 	case PWRDM_POWER_RET:
+ 		/* No need to save context */
+ 		save_state = 0;
+@@ -386,7 +387,9 @@ int __init omap3_pm_init(void)
+ 
+ 	prcm_setup_regs();
+ 
++#ifndef CONFIG_CPU_IDLE
+ 	pm_idle = omap3_pm_idle;
++#endif
+ 
+ err1:
+ 	return ret;
+Index: linux-omap-2.6/drivers/cpuidle/cpuidle.c
+===================================================================
+--- linux-omap-2.6.orig/drivers/cpuidle/cpuidle.c	2008-06-09 20:15:33.856303888 +0530
++++ linux-omap-2.6/drivers/cpuidle/cpuidle.c	2008-06-09 20:15:39.570121329 +0530
+@@ -58,6 +58,11 @@ static void cpuidle_idle_call(void)
+ 		return;
+ 	}
+ 
++#ifdef CONFIG_ARCH_OMAP3
++	local_irq_disable();
++	local_fiq_disable();
++#endif
++
+ 	/* ask the governor for the next state */
+ 	next_state = cpuidle_curr_governor->select(dev);
+ 	if (need_resched())
+@@ -70,6 +75,11 @@ static void cpuidle_idle_call(void)
+ 	target_state->time += (unsigned long long)dev->last_residency;
+ 	target_state->usage++;
+ 
++#ifdef CONFIG_ARCH_OMAP3
++	local_irq_enable();
++	local_fiq_enable();
++#endif
++
+ 	/* give the governor an opportunity to reflect on the outcome */
+ 	if (cpuidle_curr_governor->reflect)
+ 		cpuidle_curr_governor->reflect(dev);
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
+
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch
new file mode 100644
index 0000000000..17329be29b
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0001-omap3beagle-add-a-platform-device-to-hook-up-the-GP.patch
@@ -0,0 +1,69 @@
+From 7a444ee080c5f1a62ac5042f1e7926622b3e1ce7 Mon Sep 17 00:00:00 2001
+From: Koen Kooi <koen@openembedded.org>
+Date: Fri, 30 May 2008 13:43:36 +0200
+Subject: [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
+
+omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
+ * on revision A5 and earlier board the two leds can't be controlled seperately, should be fixed in rev. B and C boards.
+
+Signed-off-by: Koen Kooi <koen@openembedded.org>
+---
+ arch/arm/mach-omap2/board-omap3beagle.c |   28 ++++++++++++++++++++++++++++
+ 1 files changed, 28 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
+index c992cc7..83891fc 100644
+--- a/arch/arm/mach-omap2/board-omap3beagle.c
++++ b/arch/arm/mach-omap2/board-omap3beagle.c
+@@ -19,6 +19,7 @@
+ #include <linux/err.h>
+ #include <linux/clk.h>
+ #include <linux/io.h>
++#include <linux/leds.h>
+ 
+ #include <asm/hardware.h>
+ #include <asm/mach-types.h>
+@@ -72,6 +73,32 @@ static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ 	.ctrl_name	= "internal",
+ };
+ 
++struct gpio_led gpio_leds[] = {
++	{
++		.name = "beagleboard::led0",
++		.default_trigger = "none",
++		.gpio = 149,
++	},
++	{
++		.name = "beagleboard::led1",
++		.default_trigger = "none",
++		.gpio = 150,
++	},
++};
++
++static struct gpio_led_platform_data gpio_led_info = {
++	.leds = gpio_leds,
++	.num_leds = ARRAY_SIZE(gpio_leds),
++};
++
++static struct platform_device leds_gpio = {
++	.name = "leds-gpio",
++	.id   = -1,
++	.dev  = {
++		.platform_data = &gpio_led_info,
++	},
++};
++
+ static struct omap_board_config_kernel omap3_beagle_config[] __initdata = {
+ 	{ OMAP_TAG_UART,	&omap3_beagle_uart_config },
+ 	{ OMAP_TAG_MMC,		&omap3beagle_mmc_config },
+@@ -83,6 +110,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
+ #ifdef CONFIG_RTC_DRV_TWL4030
+ 	&omap3_beagle_twl4030rtc_device,
+ #endif
++	&leds_gpio,
+ };
+ 
+ static void __init omap3_beagle_init(void)
+-- 
+1.5.4.3
+
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0002-ARM-OMAP-SmartReflex-driver.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0002-ARM-OMAP-SmartReflex-driver.patch
new file mode 100644
index 0000000000..8e609395a0
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0002-ARM-OMAP-SmartReflex-driver.patch
@@ -0,0 +1,278 @@
+From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+To: linux-omap@vger.kernel.org
+Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+Subject: [PATCH 2/3] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
+Date: 	Fri,  6 Jun 2008 12:49:48 +0300
+
+Added new register and bit definitions to enable Smartreflex driver integration.
+Also PRM_VC_SMPS_SA bit definitions' naming was changed to match the naming of
+other similar bit definitions.
+
+Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+---
+ arch/arm/mach-omap2/prm-regbits-34xx.h |   27 ++++++--
+ arch/arm/mach-omap2/smartreflex.h      |  124 ++++++++++++++++++++++++++++++-
+ include/asm-arm/arch-omap/control.h    |   19 +++++
+ include/asm-arm/arch-omap/omap34xx.h   |    2 +
+ 4 files changed, 163 insertions(+), 9 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
+index c6a7940..f82b5a7 100644
+--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
++++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
+@@ -435,10 +435,10 @@
+ /* PM_PWSTST_EMU specific bits */
+ 
+ /* PRM_VC_SMPS_SA */
+-#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
+-#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
+-#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
+-#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
++#define OMAP3430_SMPS_SA1_SHIFT				16
++#define OMAP3430_SMPS_SA1_MASK				(0x7f << 16)
++#define OMAP3430_SMPS_SA0_SHIFT				0
++#define OMAP3430_SMPS_SA0_MASK				(0x7f << 0)
+ 
+ /* PRM_VC_SMPS_VOL_RA */
+ #define OMAP3430_VOLRA1_SHIFT				16
+@@ -452,7 +452,7 @@
+ #define OMAP3430_CMDRA0_SHIFT				0
+ #define OMAP3430_CMDRA0_MASK				(0xff << 0)
+ 
+-/* PRM_VC_CMD_VAL_0 specific bits */
++/* PRM_VC_CMD_VAL */
+ #define OMAP3430_VC_CMD_ON_SHIFT			24
+ #define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
+ #define OMAP3430_VC_CMD_ONLP_SHIFT			16
+@@ -462,7 +462,17 @@
+ #define OMAP3430_VC_CMD_OFF_SHIFT			0
+ #define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
+ 
++/* PRM_VC_CMD_VAL_0 specific bits */
++#define OMAP3430_VC_CMD_VAL0_ON				(0x3 << 4)
++#define OMAP3430_VC_CMD_VAL0_ONLP			(0x3 << 3)
++#define OMAP3430_VC_CMD_VAL0_RET			(0x3 << 3)
++#define OMAP3430_VC_CMD_VAL0_OFF			(0x3 << 3)
++
+ /* PRM_VC_CMD_VAL_1 specific bits */
++#define OMAP3430_VC_CMD_VAL1_ON				(0xB << 2)
++#define OMAP3430_VC_CMD_VAL1_ONLP			(0x3 << 3)
++#define OMAP3430_VC_CMD_VAL1_RET			(0x3 << 3)
++#define OMAP3430_VC_CMD_VAL1_OFF			(0x3 << 3)
+ 
+ /* PRM_VC_CH_CONF */
+ #define OMAP3430_CMD1					(1 << 20)
+@@ -521,6 +531,13 @@
+ #define OMAP3430_AUTO_RET				(1 << 1)
+ #define OMAP3430_AUTO_SLEEP				(1 << 0)
+ 
++/* Constants to define setup durations */
++#define OMAP3430_CLKSETUP_DURATION			0xff
++#define OMAP3430_VOLTSETUP_TIME2			0xfff
++#define OMAP3430_VOLTSETUP_TIME1			0xfff
++#define OMAP3430_VOLTOFFSET_DURATION			0xff
++#define OMAP3430_VOLTSETUP2_DURATION			0xff
++
+ /* PRM_SRAM_PCHARGE */
+ #define OMAP3430_PCHARGE_TIME_SHIFT			0
+ #define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
+diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
+index 62907ef..2091a15 100644
+--- a/arch/arm/mach-omap2/smartreflex.h
++++ b/arch/arm/mach-omap2/smartreflex.h
+@@ -1,5 +1,10 @@
++#ifndef __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H
++#define __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H
+ /*
+- * linux/arch/arm/mach-omap3/smartreflex.h
++ * linux/arch/arm/mach-omap2/smartreflex.h
++ *
++ * Copyright (C) 2008 Nokia Corporation
++ * Kalle Jokiniemi
+  *
+  * Copyright (C) 2007 Texas Instruments, Inc.
+  * Lesly A M <x0080970@ti.com>
+@@ -9,6 +14,21 @@
+  * published by the Free Software Foundation.
+  */
+ 
++#define PHY_TO_OFF_PM_MASTER(p)		(p - 0x36)
++#define PHY_TO_OFF_PM_RECIEVER(p)	(p - 0x5b)
++#define PHY_TO_OFF_PM_INT(p)		(p - 0x2e)
++
++/* SMART REFLEX REG ADDRESS OFFSET */
++#define SRCONFIG	0x00
++#define SRSTATUS	0x04
++#define SENVAL		0x08
++#define SENMIN		0x0C
++#define SENMAX		0x10
++#define SENAVG		0x14
++#define AVGWEIGHT	0x18
++#define NVALUERECIPROCAL	0x1C
++#define SENERROR	0x20
++#define ERRCONFIG	0x24
+ 
+ /* SR Modules */
+ #define SR1		1
+@@ -127,10 +147,106 @@
+ #define SR2_ERRMAXLIMIT			(0x02 << 8)
+ #define SR2_ERRMINLIMIT			(0xF9 << 0)
+ 
++/* T2 SMART REFLEX */
++#define R_SRI2C_SLAVE_ADDR		0x12
++#define R_VDD1_SR_CONTROL		0x00
++#define R_VDD2_SR_CONTROL		0x01
++#define T2_SMPS_UPDATE_DELAY		360	/* In uSec */
++
++/* Vmode control */
++#define R_DCDC_GLOBAL_CFG	PHY_TO_OFF_PM_RECIEVER(0x61)
++
++#define R_VDD1_VSEL		PHY_TO_OFF_PM_RECIEVER(0xb9)
++#define R_VDD1_VMODE_CFG	PHY_TO_OFF_PM_RECIEVER(0xba)
++#define R_VDD1_VFLOOR		PHY_TO_OFF_PM_RECIEVER(0xbb)
++#define R_VDD1_VROOF		PHY_TO_OFF_PM_RECIEVER(0xbc)
++#define R_VDD1_STEP		PHY_TO_OFF_PM_RECIEVER(0xbd)
++
++#define R_VDD2_VSEL		PHY_TO_OFF_PM_RECIEVER(0xc7)
++#define R_VDD2_VMODE_CFG	PHY_TO_OFF_PM_RECIEVER(0xc8)
++#define R_VDD2_VFLOOR		PHY_TO_OFF_PM_RECIEVER(0xc9)
++#define R_VDD2_VROOF		PHY_TO_OFF_PM_RECIEVER(0xca)
++#define R_VDD2_STEP		PHY_TO_OFF_PM_RECIEVER(0xcb)
++
++/* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE valuws */
++#define DCDC_GLOBAL_CFG_ENABLE_SRFLX	0x08
++
++/* VDDs*/
++#define PRCM_VDD1	1
++#define PRCM_VDD2	2
++#define PRCM_MAX_SYSC_REGS 30
++
++/* XXX: These should be removed/moved from here once we have a working DVFS
++   implementation in place */
++#define AT_3430		1	/*3430 ES 1.0 */
++#define AT_3430_ES2	2	/*3430 ES 2.0 */
++
++#define ID_OPP			0xE2 	/*OPP*/
++
++/* DEVICE ID/DPLL ID/CLOCK ID: bits 28-31 for OMAP type */
++#define OMAP_TYPE_SHIFT		28
++#define OMAP_TYPE_MASK		0xF
++/* OPP ID: bits: 0-4 for OPP number */
++#define OPP_NO_POS		0
++#define OPP_NO_MASK		0x1F
++/* OPP ID: bits: 5-6 for VDD */
++#define VDD_NO_POS		5
++#define VDD_NO_MASK		0x3
++/* Other IDs: bits 20-27 for ID type */
++/* These IDs have bits 25,26,27 as 1 */
++#define OTHER_ID_TYPE_SHIFT		20
++#define OTHER_ID_TYPE_MASK		0xFF
++
++#define OTHER_ID_TYPE(X) ((X & OTHER_ID_TYPE_MASK) << OTHER_ID_TYPE_SHIFT)
++#define ID_OPP_NO(X)	 ((X & OPP_NO_MASK) << OPP_NO_POS)
++#define ID_VDD(X)	 ((X & VDD_NO_MASK) << VDD_NO_POS)
++#define OMAP(X)		 ((X >> OMAP_TYPE_SHIFT) & OMAP_TYPE_MASK)
++#define get_opp_no(X)	 ((X >> OPP_NO_POS) & OPP_NO_MASK)
++#define get_vdd(X)	 ((X >> VDD_NO_POS) & VDD_NO_MASK)
++
++/* VDD1 OPPs */
++#define PRCM_VDD1_OPP1		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x1))
++#define PRCM_VDD1_OPP2		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x2))
++#define PRCM_VDD1_OPP3		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x3))
++#define PRCM_VDD1_OPP4		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x4))
++#define PRCM_VDD1_OPP5		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x5))
++#define PRCM_NO_VDD1_OPPS	5
++
++
++/* VDD2 OPPs */
++#define PRCM_VDD2_OPP1		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x1))
++#define PRCM_VDD2_OPP2		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x2))
++#define PRCM_VDD2_OPP3		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
++					ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x3))
++#define PRCM_NO_VDD2_OPPS	3
++/* XXX: end remove/move */
++
++
++/* XXX: find more appropriate place for these once DVFS is in place */
+ extern u32 current_vdd1_opp;
+ extern u32 current_vdd2_opp;
+-extern struct kset power_subsys;
+ 
+-extern inline int loop_wait(u32 *lcnt, u32 *rcnt, u32 delay);
+-extern void omap_udelay(u32 udelay);
++/*
++ * Smartreflex module enable/disable interface.
++ * NOTE: if smartreflex is not enabled from sysfs, these functions will not
++ * do anything.
++ */
++#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE)
++void enable_smartreflex(int srid);
++void disable_smartreflex(int srid);
++#else
++static inline void enable_smartreflex(int srid) {}
++static inline void disable_smartreflex(int srid) {}
++#endif
++
++
++#endif
++
+ 
+diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
+index 12bc22a..6e64fe7 100644
+--- a/include/asm-arm/arch-omap/control.h
++++ b/include/asm-arm/arch-omap/control.h
+@@ -138,6 +138,15 @@
+ #define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
+ #define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
+ #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
++#define OMAP343X_CONTROL_FUSE_OPP1_VDD1	(OMAP2_CONTROL_GENERAL + 0x0110)
++#define OMAP343X_CONTROL_FUSE_OPP2_VDD1	(OMAP2_CONTROL_GENERAL + 0x0114)
++#define OMAP343X_CONTROL_FUSE_OPP3_VDD1	(OMAP2_CONTROL_GENERAL + 0x0118)
++#define OMAP343X_CONTROL_FUSE_OPP4_VDD1	(OMAP2_CONTROL_GENERAL + 0x011c)
++#define OMAP343X_CONTROL_FUSE_OPP5_VDD1	(OMAP2_CONTROL_GENERAL + 0x0120)
++#define OMAP343X_CONTROL_FUSE_OPP1_VDD2	(OMAP2_CONTROL_GENERAL + 0x0124)
++#define OMAP343X_CONTROL_FUSE_OPP2_VDD2	(OMAP2_CONTROL_GENERAL + 0x0128)
++#define OMAP343X_CONTROL_FUSE_OPP3_VDD2	(OMAP2_CONTROL_GENERAL + 0x012c)
++#define OMAP343X_CONTROL_FUSE_SR	(OMAP2_CONTROL_GENERAL + 0x0130)
+ #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+ #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+ #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
+@@ -172,6 +181,16 @@
+ #define OMAP2_SYSBOOT_1_MASK		(1 << 1)
+ #define OMAP2_SYSBOOT_0_MASK		(1 << 0)
+ 
++/* CONTROL_FUSE_SR bits */
++#define OMAP343X_SR2_SENNENABLE_MASK	(0x3 << 10)
++#define OMAP343X_SR2_SENNENABLE_SHIFT	10
++#define OMAP343X_SR2_SENPENABLE_MASK	(0x3 << 8)
++#define OMAP343X_SR2_SENPENABLE_SHIFT	8
++#define OMAP343X_SR1_SENNENABLE_MASK	(0x3 << 2)
++#define OMAP343X_SR1_SENNENABLE_SHIFT	2
++#define OMAP343X_SR1_SENPENABLE_MASK	(0x3 << 0)
++#define OMAP343X_SR1_SENPENABLE_SHIFT	0
++
+ #ifndef __ASSEMBLY__
+ #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ extern void __iomem *omap_ctrl_base_get(void);
+diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
+index 6a0459a..3667fd6 100644
+--- a/include/asm-arm/arch-omap/omap34xx.h
++++ b/include/asm-arm/arch-omap/omap34xx.h
+@@ -54,6 +54,8 @@
+ #define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
+ #define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
+ #define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
++#define OMAP34XX_SR1_BASE	0x480C9000
++#define OMAP34XX_SR2_BASE	0x480CB000
+ 
+ 
+ #if defined(CONFIG_ARCH_OMAP3430)
+-- 
+1.5.4.3
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0002-omap3-cpuidle.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0002-omap3-cpuidle.patch
new file mode 100644
index 0000000000..d35fd47567
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0002-omap3-cpuidle.patch
@@ -0,0 +1,88 @@
+From: "Rajendra Nayak" <rnayak@ti.com>
+To: <linux-omap@vger.kernel.org>
+Subject: [PATCH 02/02] Kconfig changes
+Date: 	Tue, 10 Jun 2008 12:39:02 +0530
+
+Updates the CPUidle Kconfig
+
+Signed-off-by: Rajendra Nayak <rnayak@ti.com>   
+
+---
+ arch/arm/Kconfig        |   10 ++++++++++
+ drivers/cpuidle/Kconfig |   28 ++++++++++++++++++++++------
+ 2 files changed, 32 insertions(+), 6 deletions(-)
+
+Index: linux-omap-2.6/arch/arm/Kconfig
+===================================================================
+--- linux-omap-2.6.orig/arch/arm/Kconfig	2008-06-10 11:43:10.790502713 +0530
++++ linux-omap-2.6/arch/arm/Kconfig	2008-06-10 11:43:38.701604549 +0530
+@@ -954,6 +954,16 @@ config ATAGS_PROC
+ 
+ endmenu
+ 
++if (ARCH_OMAP)
++
++menu "CPUIdle"
++
++source "drivers/cpuidle/Kconfig"
++
++endmenu
++
++endif
++
+ if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+ 
+ menu "CPU Frequency scaling"
+Index: linux-omap-2.6/drivers/cpuidle/Kconfig
+===================================================================
+--- linux-omap-2.6.orig/drivers/cpuidle/Kconfig	2008-06-10 11:43:10.790502713 +0530
++++ linux-omap-2.6/drivers/cpuidle/Kconfig	2008-06-10 12:06:36.139332151 +0530
+@@ -1,20 +1,36 @@
++menu "CPU idle PM support"
+ 
+ config CPU_IDLE
+ 	bool "CPU idle PM support"
+-	default ACPI
++	default n
+ 	help
+ 	  CPU idle is a generic framework for supporting software-controlled
+ 	  idle processor power management.  It includes modular cross-platform
+ 	  governors that can be swapped during runtime.
+ 
+-	  If you're using an ACPI-enabled platform, you should say Y here.
++	  If you're using a mobile platform that supports CPU idle PM (e.g.
++	  an ACPI-capable notebook), you should say Y here.
++
++if CPU_IDLE
++
++comment "Governors"
+ 
+ config CPU_IDLE_GOV_LADDER
+-	bool
++	bool "ladder"
+ 	depends on CPU_IDLE
+-	default y
++	default n
+ 
+ config CPU_IDLE_GOV_MENU
+-	bool
++	bool "menu"
+ 	depends on CPU_IDLE && NO_HZ
+-	default y
++	default n
++        help
++	  This cpuidle governor evaluates all available states and chooses the
++	  deepest state that meets all of the following constraints: BM activity,
++	  expected time until next timer interrupt, and last break event time
++	  delta.  It is designed to minimize power consumption.  Currently
++	  dynticks is required.
++
++endif   # CPU_IDLE
++
++endmenu
+
+--
+To unsubscribe from this list: send the line "unsubscribe linux-omap" in
+the body of a message to majordomo@vger.kernel.org
+More majordomo info at  http://vger.kernel.org/majordomo-info.html
+
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch
new file mode 100644
index 0000000000..40d5790367
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/0003-ARM-OMAP-SmartReflex-driver.patch
@@ -0,0 +1,1001 @@
+From: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+To: linux-omap@vger.kernel.org
+Cc: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+Subject: [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
+Date: 	Fri,  6 Jun 2008 12:49:49 +0300
+Message-Id: <1212745789-13926-3-git-send-email-ext-kalle.jokiniemi@nokia.com>
+
+- Changed register accesses to use prm_{read,write}_mod_reg and
+  prm_{set,clear,rmw}_mod_reg_bits() functions instread of
+  "REG_X = REG_Y" type accesses.
+
+- Changed direct register clock enables/disables to clockframework calls.
+
+- replaced cpu-related #ifdefs with if (cpu_is_xxxx()) calls.
+
+- Added E-fuse support: Use silicon characteristics parameters from E-fuse
+
+- added smartreflex_disable/enable calls to pm34xx.c suspend function.
+
+- Added "SmartReflex support" entry into Kconfig under "System type->TI OMAP
+  Implementations". It depends on ARCH_OMAP34XX and TWL4030_CORE.
+
+- Added "SmartReflex testing support" Kconfig option for using hard coded
+  software parameters instead of E-fuse parameters.
+
+Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@nokia.com>
+---
+ arch/arm/mach-omap2/Makefile      |    3 +
+ arch/arm/mach-omap2/pm34xx.c      |    9 +
+ arch/arm/mach-omap2/smartreflex.c |  531 +++++++++++++++++++++++--------------
+ arch/arm/mach-omap2/smartreflex.h |    9 +-
+ arch/arm/plat-omap/Kconfig        |   31 +++
+ 5 files changed, 385 insertions(+), 198 deletions(-)
+
+diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
+index 50c6657..f645b6e 100644
+--- a/arch/arm/mach-omap2/Makefile
++++ b/arch/arm/mach-omap2/Makefile
+@@ -25,6 +25,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+ obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+ endif
+ 
++# SmartReflex driver
++obj-$(CONFIG_OMAP_SMARTREFLEX)		+= smartreflex.o
++
+ # Clock framework
+ obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
+ obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
+diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
+index 7e775cc..3da4f47 100644
+--- a/arch/arm/mach-omap2/pm34xx.c
++++ b/arch/arm/mach-omap2/pm34xx.c
+@@ -36,6 +36,7 @@
+ 
+ #include "prm.h"
+ #include "pm.h"
++#include "smartreflex.h"
+ 
+ struct power_state {
+ 	struct powerdomain *pwrdm;
+@@ -256,6 +257,10 @@ static int omap3_pm_suspend(void)
+ 	struct power_state *pwrst;
+ 	int state, ret = 0;
+ 
++	/* XXX Disable smartreflex before entering suspend */
++	disable_smartreflex(SR1);
++	disable_smartreflex(SR2);
++
+ 	/* Read current next_pwrsts */
+ 	list_for_each_entry(pwrst, &pwrst_list, node)
+ 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+@@ -287,6 +292,10 @@ restore:
+ 		printk(KERN_INFO "Successfully put all powerdomains "
+ 		       "to target state\n");
+ 
++	/* XXX Enable smartreflex after suspend */
++	enable_smartreflex(SR1);
++	enable_smartreflex(SR2);
++
+ 	return ret;
+ }
+ 
+diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
+index dae7460..0b10a5d 100644
+--- a/arch/arm/mach-omap2/smartreflex.c
++++ b/arch/arm/mach-omap2/smartreflex.c
+@@ -3,6 +3,9 @@
+  *
+  * OMAP34XX SmartReflex Voltage Control
+  *
++ * Copyright (C) 2008 Nokia Corporation
++ * Kalle Jokiniemi
++ *
+  * Copyright (C) 2007 Texas Instruments, Inc.
+  * Lesly A M <x0080970@ti.com>
+  *
+@@ -20,13 +23,16 @@
+ #include <linux/err.h>
+ #include <linux/clk.h>
+ #include <linux/sysfs.h>
+-
+-#include <asm/arch/prcm.h>
+-#include <asm/arch/power_companion.h>
++#include <linux/kobject.h>
++#include <linux/i2c/twl4030.h>
+ #include <linux/io.h>
+ 
+-#include "prcm-regs.h"
++#include <asm/arch/omap34xx.h>
++#include <asm/arch/control.h>
++
++#include "prm.h"
+ #include "smartreflex.h"
++#include "prm-regbits-34xx.h"
+ 
+ 
+ /* #define DEBUG_SR 1 */
+@@ -37,11 +43,16 @@
+ #  define DPRINTK(fmt, args...)
+ #endif
+ 
++/* XXX: These should be relocated where-ever the OPP implementation will be */
++u32 current_vdd1_opp;
++u32 current_vdd2_opp;
++
+ struct omap_sr{
+ 	int srid;
+ 	int is_sr_reset;
+ 	int is_autocomp_active;
+ 	struct clk *fck;
++	u32 clk_length;
+ 	u32 req_opp_no;
+ 	u32 opp1_nvalue, opp2_nvalue, opp3_nvalue, opp4_nvalue, opp5_nvalue;
+ 	u32 senp_mod, senn_mod;
+@@ -53,6 +64,7 @@ static struct omap_sr sr1 = {
+ 	.srid = SR1,
+ 	.is_sr_reset = 1,
+ 	.is_autocomp_active = 0,
++	.clk_length = 0,
+ 	.srbase_addr = OMAP34XX_SR1_BASE,
+ };
+ 
+@@ -60,6 +72,7 @@ static struct omap_sr sr2 = {
+ 	.srid = SR2,
+ 	.is_sr_reset = 1,
+ 	.is_autocomp_active = 0,
++	.clk_length = 0,
+ 	.srbase_addr = OMAP34XX_SR2_BASE,
+ };
+ 
+@@ -85,8 +98,6 @@ static inline u32 sr_read_reg(struct omap_sr *sr, int offset)
+ 	return omap_readl(sr->srbase_addr + offset);
+ }
+ 
+-
+-#ifndef USE_EFUSE_VALUES
+ static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen)
+ {
+ 	u32 gn, rn, mul;
+@@ -100,7 +111,21 @@ static void cal_reciprocal(u32 sensor, u32 *sengain, u32 *rnsen)
+ 		}
+ 	}
+ }
+-#endif
++
++static void sr_clk_get(struct omap_sr *sr)
++{
++	if (sr->srid == SR1) {
++		sr->fck = clk_get(NULL, "sr1_fck");
++		if (IS_ERR(sr->fck))
++			printk(KERN_ERR "Could not get sr1_fck\n");
++
++	} else if (sr->srid == SR2) {
++		sr->fck = clk_get(NULL, "sr2_fck");
++		if (IS_ERR(sr->fck))
++			printk(KERN_ERR "Could not get sr2_fck\n");
++
++	}
++}
+ 
+ static int sr_clk_enable(struct omap_sr *sr)
+ {
+@@ -131,22 +156,86 @@ static int sr_clk_disable(struct omap_sr *sr)
+ 	return 0;
+ }
+ 
+-static void sr_set_nvalues(struct omap_sr *sr)
++static void sr_set_clk_length(struct omap_sr *sr)
++{
++	struct clk *osc_sys_ck;
++	u32 sys_clk = 0;
++
++	osc_sys_ck = clk_get(NULL, "osc_sys_ck");
++	sys_clk = clk_get_rate(osc_sys_ck);
++	clk_put(osc_sys_ck);
++
++	switch (sys_clk) {
++	case 12000000:
++		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
++		break;
++	case 13000000:
++		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
++		break;
++	case 19200000:
++		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
++		break;
++	case 26000000:
++		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
++		break;
++	case 38400000:
++		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
++		break;
++	default :
++		printk(KERN_ERR "Invalid sysclk value: %d\n", sys_clk);
++		break;
++	}
++}
++
++static void sr_set_efuse_nvalues(struct omap_sr *sr)
++{
++	if (sr->srid == SR1) {
++		sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++					OMAP343X_SR1_SENNENABLE_MASK) >>
++					OMAP343X_SR1_SENNENABLE_SHIFT;
++
++		sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++					OMAP343X_SR1_SENPENABLE_MASK) >>
++					OMAP343X_SR1_SENPENABLE_SHIFT;
++
++		sr->opp5_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP5_VDD1);
++		sr->opp4_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP4_VDD1);
++		sr->opp3_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP3_VDD1);
++		sr->opp2_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP2_VDD1);
++		sr->opp1_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP1_VDD1);
++	} else if (sr->srid == SR2) {
++		sr->senn_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++					OMAP343X_SR2_SENNENABLE_MASK) >>
++					OMAP343X_SR2_SENNENABLE_SHIFT;
++
++		sr->senp_mod = (omap_ctrl_readl(OMAP343X_CONTROL_FUSE_SR) &
++					OMAP343X_SR2_SENPENABLE_MASK) >>
++					OMAP343X_SR2_SENPENABLE_SHIFT;
++
++		sr->opp3_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP3_VDD2);
++		sr->opp2_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP2_VDD2);
++		sr->opp1_nvalue = omap_ctrl_readl(
++					OMAP343X_CONTROL_FUSE_OPP1_VDD2);
++	}
++}
++
++/* Hard coded nvalues for testing purposes, may cause device to hang! */
++static void sr_set_testing_nvalues(struct omap_sr *sr)
+ {
+-#ifdef USE_EFUSE_VALUES
+-	u32 n1, n2;
+-#else
+ 	u32 senpval, sennval;
+ 	u32 senpgain, senngain;
+ 	u32 rnsenp, rnsenn;
+-#endif
+ 
+ 	if (sr->srid == SR1) {
+-#ifdef USE_EFUSE_VALUES
+-		/* Read values for VDD1 from EFUSE */
+-#else
+-		/* since E-Fuse Values are not available, calculating the
+-		 * reciprocal of the SenN and SenP values for SR1
++		/* Calculating the reciprocal of the SenN and SenP values
++		 * for SR1
+ 		 */
+ 		sr->senp_mod = 0x03;        /* SenN-M5 enabled */
+ 		sr->senn_mod = 0x03;
+@@ -216,15 +305,16 @@ static void sr_set_nvalues(struct omap_sr *sr)
+ 				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
+ 				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
+ 
++		/* XXX The clocks are enabled in the startup and NVALUE is
++		 * set also there. Disabling this for now, but this could
++		 * be related to dynamic sleep during boot */
++#if 0
+ 		sr_clk_enable(sr);
+ 		sr_write_reg(sr, NVALUERECIPROCAL, sr->opp3_nvalue);
+ 		sr_clk_disable(sr);
+-
+ #endif
++
+ 	} else if (sr->srid == SR2) {
+-#ifdef USE_EFUSE_VALUES
+-		/* Read values for VDD2 from EFUSE */
+-#else
+ 		/* since E-Fuse Values are not available, calculating the
+ 		 * reciprocal of the SenN and SenP values for SR2
+ 		 */
+@@ -269,134 +359,163 @@ static void sr_set_nvalues(struct omap_sr *sr)
+ 				(senngain << NVALUERECIPROCAL_SENNGAIN_SHIFT) |
+ 				(rnsenp << NVALUERECIPROCAL_RNSENP_SHIFT) |
+ 				(rnsenn << NVALUERECIPROCAL_RNSENN_SHIFT));
+-
+-#endif
+ 	}
+ 
+ }
+ 
++static void sr_set_nvalues(struct omap_sr *sr)
++{
++	if (SR_TESTING_NVALUES)
++		sr_set_testing_nvalues(sr);
++	else
++		sr_set_efuse_nvalues(sr);
++}
++
+ static void sr_configure_vp(int srid)
+ {
+ 	u32 vpconfig;
+ 
+ 	if (srid == SR1) {
+ 		vpconfig = PRM_VP1_CONFIG_ERROROFFSET | PRM_VP1_CONFIG_ERRORGAIN
+-			| PRM_VP1_CONFIG_INITVOLTAGE | PRM_VP1_CONFIG_TIMEOUTEN;
+-
+-		PRM_VP1_CONFIG = vpconfig;
+-		PRM_VP1_VSTEPMIN = PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
+-						PRM_VP1_VSTEPMIN_VSTEPMIN;
+-
+-		PRM_VP1_VSTEPMAX = PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
+-						PRM_VP1_VSTEPMAX_VSTEPMAX;
+-
+-		PRM_VP1_VLIMITTO = PRM_VP1_VLIMITTO_VDDMAX |
+-			PRM_VP1_VLIMITTO_VDDMIN | PRM_VP1_VLIMITTO_TIMEOUT;
+-
+-		PRM_VP1_CONFIG |= PRM_VP1_CONFIG_INITVDD;
+-		PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_INITVDD;
++					| PRM_VP1_CONFIG_INITVOLTAGE
++					| PRM_VP1_CONFIG_TIMEOUTEN;
++
++		prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_CONFIG_OFFSET);
++		prm_write_mod_reg(PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN |
++					PRM_VP1_VSTEPMIN_VSTEPMIN,
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_VSTEPMIN_OFFSET);
++
++		prm_write_mod_reg(PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX |
++					PRM_VP1_VSTEPMAX_VSTEPMAX,
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_VSTEPMAX_OFFSET);
++
++		prm_write_mod_reg(PRM_VP1_VLIMITTO_VDDMAX |
++					PRM_VP1_VLIMITTO_VDDMIN |
++					PRM_VP1_VLIMITTO_TIMEOUT,
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_VLIMITTO_OFFSET);
++
++		/* Trigger initVDD value copy to voltage processor */
++		prm_set_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_CONFIG_OFFSET);
++		/* Clear initVDD copy trigger bit */
++		prm_clear_mod_reg_bits(PRM_VP1_CONFIG_INITVDD, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_CONFIG_OFFSET);
+ 
+ 	} else if (srid == SR2) {
+ 		vpconfig = PRM_VP2_CONFIG_ERROROFFSET | PRM_VP2_CONFIG_ERRORGAIN
+-			| PRM_VP2_CONFIG_INITVOLTAGE | PRM_VP2_CONFIG_TIMEOUTEN;
+-
+-		PRM_VP2_CONFIG = vpconfig;
+-		PRM_VP2_VSTEPMIN = PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
+-						PRM_VP2_VSTEPMIN_VSTEPMIN;
+-
+-		PRM_VP2_VSTEPMAX = PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
+-						PRM_VP2_VSTEPMAX_VSTEPMAX;
+-
+-		PRM_VP2_VLIMITTO = PRM_VP2_VLIMITTO_VDDMAX |
+-			PRM_VP2_VLIMITTO_VDDMIN | PRM_VP2_VLIMITTO_TIMEOUT;
+-
+-		PRM_VP2_CONFIG |= PRM_VP2_CONFIG_INITVDD;
+-		PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_INITVDD;
++					| PRM_VP2_CONFIG_INITVOLTAGE
++					| PRM_VP2_CONFIG_TIMEOUTEN;
++
++		prm_write_mod_reg(vpconfig, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_CONFIG_OFFSET);
++		prm_write_mod_reg(PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN |
++					PRM_VP2_VSTEPMIN_VSTEPMIN,
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_VSTEPMIN_OFFSET);
++
++		prm_write_mod_reg(PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX |
++					PRM_VP2_VSTEPMAX_VSTEPMAX,
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_VSTEPMAX_OFFSET);
++
++		prm_write_mod_reg(PRM_VP2_VLIMITTO_VDDMAX |
++					PRM_VP2_VLIMITTO_VDDMIN |
++					PRM_VP2_VLIMITTO_TIMEOUT,
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_VLIMITTO_OFFSET);
++
++		/* Trigger initVDD value copy to voltage processor */
++		prm_set_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_CONFIG_OFFSET);
++		/* Reset initVDD copy trigger bit */
++		prm_clear_mod_reg_bits(PRM_VP2_CONFIG_INITVDD, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_CONFIG_OFFSET);
+ 
+ 	}
+ }
+ 
+ static void sr_configure_vc(void)
+ {
+-	PRM_VC_SMPS_SA =
+-		(R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA1_SHIFT) |
+-		(R_SRI2C_SLAVE_ADDR << PRM_VC_SMPS_SA0_SHIFT);
+-
+-	PRM_VC_SMPS_VOL_RA = (R_VDD2_SR_CONTROL << PRM_VC_SMPS_VOLRA1_SHIFT) |
+-				(R_VDD1_SR_CONTROL << PRM_VC_SMPS_VOLRA0_SHIFT);
+-
+-	PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL0_ON << PRM_VC_CMD_ON_SHIFT) |
+-			(PRM_VC_CMD_VAL0_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
+-			(PRM_VC_CMD_VAL0_RET << PRM_VC_CMD_RET_SHIFT) |
+-			(PRM_VC_CMD_VAL0_OFF << PRM_VC_CMD_OFF_SHIFT);
+-
+-	PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL1_ON << PRM_VC_CMD_ON_SHIFT) |
+-			(PRM_VC_CMD_VAL1_ONLP << PRM_VC_CMD_ONLP_SHIFT) |
+-			(PRM_VC_CMD_VAL1_RET << PRM_VC_CMD_RET_SHIFT) |
+-			(PRM_VC_CMD_VAL1_OFF << PRM_VC_CMD_OFF_SHIFT);
+-
+-	PRM_VC_CH_CONF = PRM_VC_CH_CONF_CMD1 | PRM_VC_CH_CONF_RAV1;
+-
+-	PRM_VC_I2C_CFG = PRM_VC_I2C_CFG_MCODE | PRM_VC_I2C_CFG_HSEN
+-							| PRM_VC_I2C_CFG_SREN;
++	prm_write_mod_reg((R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA1_SHIFT) |
++			(R_SRI2C_SLAVE_ADDR << OMAP3430_SMPS_SA0_SHIFT),
++			OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_SA_OFFSET);
++
++	prm_write_mod_reg((R_VDD2_SR_CONTROL << OMAP3430_VOLRA1_SHIFT) |
++			(R_VDD1_SR_CONTROL << OMAP3430_VOLRA0_SHIFT),
++			OMAP3430_GR_MOD, OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET);
++
++	prm_write_mod_reg((OMAP3430_VC_CMD_VAL0_ON <<
++		OMAP3430_VC_CMD_ON_SHIFT) |
++		(OMAP3430_VC_CMD_VAL0_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) |
++		(OMAP3430_VC_CMD_VAL0_RET << OMAP3430_VC_CMD_RET_SHIFT) |
++		(OMAP3430_VC_CMD_VAL0_OFF << OMAP3430_VC_CMD_OFF_SHIFT),
++		OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
++
++	prm_write_mod_reg((OMAP3430_VC_CMD_VAL1_ON <<
++		OMAP3430_VC_CMD_ON_SHIFT) |
++		(OMAP3430_VC_CMD_VAL1_ONLP << OMAP3430_VC_CMD_ONLP_SHIFT) |
++		(OMAP3430_VC_CMD_VAL1_RET << OMAP3430_VC_CMD_RET_SHIFT) |
++		(OMAP3430_VC_CMD_VAL1_OFF << OMAP3430_VC_CMD_OFF_SHIFT),
++		OMAP3430_GR_MOD, OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
++
++	prm_write_mod_reg(OMAP3430_CMD1 | OMAP3430_RAV1,
++				OMAP3430_GR_MOD,
++				OMAP3_PRM_VC_CH_CONF_OFFSET);
++
++	prm_write_mod_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN | OMAP3430_SREN,
++				OMAP3430_GR_MOD,
++				OMAP3_PRM_VC_I2C_CFG_OFFSET);
+ 
+ 	/* Setup voltctrl and other setup times */
++	/* XXX CONFIG_SYSOFFMODE has not been implemented yet */
+ #ifdef CONFIG_SYSOFFMODE
+-	PRM_VOLTCTRL = PRM_VOLTCTRL_AUTO_OFF | PRM_VOLTCTRL_AUTO_RET;
+-	PRM_CLKSETUP = PRM_CLKSETUP_DURATION;
+-	PRM_VOLTSETUP1 = (PRM_VOLTSETUP_TIME2 << PRM_VOLTSETUP_TIME2_OFFSET) |
+-			(PRM_VOLTSETUP_TIME1 << PRM_VOLTSETUP_TIME1_OFFSET);
+-	PRM_VOLTOFFSET = PRM_VOLTOFFSET_DURATION;
+-	PRM_VOLTSETUP2 = PRM_VOLTSETUP2_DURATION;
++	prm_write_mod_reg(OMAP3430_AUTO_OFF | OMAP3430_AUTO_RET,
++			OMAP3430_GR_MOD,
++			OMAP3_PRM_VOLTCTRL_OFFSET);
++
++	prm_write_mod_reg(OMAP3430_CLKSETUP_DURATION, OMAP3430_GR_MOD,
++			OMAP3_PRM_CLKSETUP_OFFSET);
++	prm_write_mod_reg((OMAP3430_VOLTSETUP_TIME2 <<
++			OMAP3430_VOLTSETUP_TIME2_OFFSET) |
++			(OMAP3430_VOLTSETUP_TIME1 <<
++			OMAP3430_VOLTSETUP_TIME1_OFFSET),
++			OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
++
++	prm_write_mod_reg(OMAP3430_VOLTOFFSET_DURATION, OMAP3430_GR_MOD,
++			OMAP3_PRM_VOLTOFFSET_OFFSET);
++	prm_write_mod_reg(OMAP3430_VOLTSETUP2_DURATION, OMAP3430_GR_MOD,
++			OMAP3_PRM_VOLTSETUP2_OFFSET);
+ #else
+-	PRM_VOLTCTRL |= PRM_VOLTCTRL_AUTO_RET;
++	prm_set_mod_reg_bits(OMAP3430_AUTO_RET, OMAP3430_GR_MOD,
++			OMAP3_PRM_VOLTCTRL_OFFSET);
+ #endif
+ 
+ }
+ 
+-
+ static void sr_configure(struct omap_sr *sr)
+ {
+-	u32 sys_clk, sr_clk_length = 0;
+ 	u32 sr_config;
+ 	u32 senp_en , senn_en;
+ 
++	if (sr->clk_length == 0)
++		sr_set_clk_length(sr);
++
+ 	senp_en = sr->senp_mod;
+ 	senn_en = sr->senn_mod;
+-
+-	sys_clk = prcm_get_system_clock_speed();
+-
+-	switch (sys_clk) {
+-	case 12000:
+-		sr_clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+-		break;
+-	case 13000:
+-		sr_clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+-		break;
+-	case 19200:
+-		sr_clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+-		break;
+-	case 26000:
+-		sr_clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+-		break;
+-	case 38400:
+-		sr_clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+-		break;
+-	default :
+-		printk(KERN_ERR "Invalid sysclk value\n");
+-		break;
+-	}
+-
+-	DPRINTK(KERN_DEBUG "SR : sys clk %lu\n", sys_clk);
+ 	if (sr->srid == SR1) {
+ 		sr_config = SR1_SRCONFIG_ACCUMDATA |
+-			(sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
++			(sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ 			SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
+ 			SRCONFIG_MINMAXAVG_EN |
+ 			(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
+ 			(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
+ 			SRCONFIG_DELAYCTRL;
+-
++		DPRINTK(KERN_DEBUG "setting SRCONFIG1 to 0x%08lx\n",
++						(unsigned long int) sr_config);
+ 		sr_write_reg(sr, SRCONFIG, sr_config);
+ 
+ 		sr_write_reg(sr, AVGWEIGHT, SR1_AVGWEIGHT_SENPAVGWEIGHT |
+@@ -408,18 +527,18 @@ static void sr_configure(struct omap_sr *sr)
+ 
+ 	} else if (sr->srid == SR2) {
+ 		sr_config = SR2_SRCONFIG_ACCUMDATA |
+-			(sr_clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
++			(sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+ 			SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN |
+ 			SRCONFIG_MINMAXAVG_EN |
+ 			(senn_en << SRCONFIG_SENNENABLE_SHIFT) |
+ 			(senp_en << SRCONFIG_SENPENABLE_SHIFT) |
+ 			SRCONFIG_DELAYCTRL;
+ 
++		DPRINTK(KERN_DEBUG "setting SRCONFIG2 to 0x%08lx\n",
++						(unsigned long int) sr_config);
+ 		sr_write_reg(sr, SRCONFIG, sr_config);
+-
+ 		sr_write_reg(sr, AVGWEIGHT, SR2_AVGWEIGHT_SENPAVGWEIGHT |
+ 					SR2_AVGWEIGHT_SENNAVGWEIGHT);
+-
+ 		sr_modify_reg(sr, ERRCONFIG, (SR_ERRWEIGHT_MASK |
+ 			SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+ 			(SR2_ERRWEIGHT | SR2_ERRMAXLIMIT | SR2_ERRMINLIMIT));
+@@ -428,9 +547,9 @@ static void sr_configure(struct omap_sr *sr)
+ 	sr->is_sr_reset = 0;
+ }
+ 
+-static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
++static int sr_enable(struct omap_sr *sr, u32 target_opp_no)
+ {
+-	u32 nvalue_reciprocal, current_nvalue;
++	u32 nvalue_reciprocal;
+ 
+ 	sr->req_opp_no = target_opp_no;
+ 
+@@ -472,11 +591,10 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
+ 		}
+ 	}
+ 
+-	current_nvalue = sr_read_reg(sr, NVALUERECIPROCAL);
+-
+-	if (current_nvalue == nvalue_reciprocal) {
+-		DPRINTK("System is already at the desired voltage level\n");
+-		return;
++	if (nvalue_reciprocal == 0) {
++		printk(KERN_NOTICE "OPP%d doesn't support SmartReflex\n",
++								target_opp_no);
++		return SR_FALSE;
+ 	}
+ 
+ 	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+@@ -485,18 +603,19 @@ static void sr_enable(struct omap_sr *sr, u32 target_opp_no)
+ 	sr_modify_reg(sr, ERRCONFIG,
+ 			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST),
+ 			(ERRCONFIG_VPBOUNDINTEN | ERRCONFIG_VPBOUNDINTST));
+-
+ 	if (sr->srid == SR1) {
+ 		/* Enable VP1 */
+-		PRM_VP1_CONFIG |= PRM_VP1_CONFIG_VPENABLE;
++		prm_set_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
++				OMAP3_PRM_VP1_CONFIG_OFFSET);
+ 	} else if (sr->srid == SR2) {
+ 		/* Enable VP2 */
+-		PRM_VP2_CONFIG |= PRM_VP2_CONFIG_VPENABLE;
++		prm_set_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
++				OMAP3_PRM_VP2_CONFIG_OFFSET);
+ 	}
+ 
+ 	/* SRCONFIG - enable SR */
+ 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+-
++	return SR_TRUE;
+ }
+ 
+ static void sr_disable(struct omap_sr *sr)
+@@ -507,11 +626,13 @@ static void sr_disable(struct omap_sr *sr)
+ 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, ~SRCONFIG_SRENABLE);
+ 
+ 	if (sr->srid == SR1) {
+-		/* Enable VP1 */
+-		PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
++		/* Disable VP1 */
++		prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP1_CONFIG_OFFSET);
+ 	} else if (sr->srid == SR2) {
+-		/* Enable VP2 */
+-		PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
++		/* Disable VP2 */
++		prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE, OMAP3430_GR_MOD,
++					OMAP3_PRM_VP2_CONFIG_OFFSET);
+ 	}
+ }
+ 
+@@ -535,7 +656,12 @@ void sr_start_vddautocomap(int srid, u32 target_opp_no)
+ 									srid);
+ 
+ 	sr->is_autocomp_active = 1;
+-	sr_enable(sr, target_opp_no);
++	if (!sr_enable(sr, target_opp_no)) {
++		printk(KERN_WARNING "SR%d: VDD autocomp not activated\n", srid);
++		sr->is_autocomp_active = 0;
++		if (sr->is_sr_reset == 1)
++			sr_clk_disable(sr);
++	}
+ }
+ EXPORT_SYMBOL(sr_start_vddautocomap);
+ 
+@@ -574,20 +700,18 @@ void enable_smartreflex(int srid)
+ 
+ 	if (sr->is_autocomp_active == 1) {
+ 		if (sr->is_sr_reset == 1) {
+-			if (srid == SR1) {
+-				/* Enable SR clks */
+-				CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
+-				target_opp_no = get_opp_no(current_vdd1_opp);
++			/* Enable SR clks */
++			sr_clk_enable(sr);
+ 
+-			} else if (srid == SR2) {
+-				/* Enable SR clks */
+-				CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
++			if (srid == SR1)
++				target_opp_no = get_opp_no(current_vdd1_opp);
++			else if (srid == SR2)
+ 				target_opp_no = get_opp_no(current_vdd2_opp);
+-			}
+ 
+ 			sr_configure(sr);
+ 
+-			sr_enable(sr, target_opp_no);
++			if (!sr_enable(sr, target_opp_no))
++				sr_clk_disable(sr);
+ 		}
+ 	}
+ }
+@@ -602,15 +726,6 @@ void disable_smartreflex(int srid)
+ 		sr = &sr2;
+ 
+ 	if (sr->is_autocomp_active == 1) {
+-		if (srid == SR1) {
+-			/* Enable SR clk */
+-			CM_FCLKEN_WKUP |= SR1_CLK_ENABLE;
+-
+-		} else if (srid == SR2) {
+-			/* Enable SR clk */
+-			CM_FCLKEN_WKUP |= SR2_CLK_ENABLE;
+-		}
+-
+ 		if (sr->is_sr_reset == 0) {
+ 
+ 			sr->is_sr_reset = 1;
+@@ -618,17 +733,18 @@ void disable_smartreflex(int srid)
+ 			sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE,
+ 							~SRCONFIG_SRENABLE);
+ 
++			/* Disable SR clk */
++			sr_clk_disable(sr);
+ 			if (sr->srid == SR1) {
+-				/* Disable SR clk */
+-				CM_FCLKEN_WKUP &= ~SR1_CLK_ENABLE;
+-				/* Enable VP1 */
+-				PRM_VP1_CONFIG &= ~PRM_VP1_CONFIG_VPENABLE;
+-
++				/* Disable VP1 */
++				prm_clear_mod_reg_bits(PRM_VP1_CONFIG_VPENABLE,
++						OMAP3430_GR_MOD,
++						OMAP3_PRM_VP1_CONFIG_OFFSET);
+ 			} else if (sr->srid == SR2) {
+-				/* Disable SR clk */
+-				CM_FCLKEN_WKUP &= ~SR2_CLK_ENABLE;
+-				/* Enable VP2 */
+-				PRM_VP2_CONFIG &= ~PRM_VP2_CONFIG_VPENABLE;
++				/* Disable VP2 */
++				prm_clear_mod_reg_bits(PRM_VP2_CONFIG_VPENABLE,
++						OMAP3430_GR_MOD,
++						OMAP3_PRM_VP2_CONFIG_OFFSET);
+ 			}
+ 		}
+ 	}
+@@ -638,7 +754,6 @@ void disable_smartreflex(int srid)
+ /* Voltage Scaling using SR VCBYPASS */
+ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
+ {
+-	int ret;
+ 	int sr_status = 0;
+ 	u32 vdd, target_opp_no;
+ 	u32 vc_bypass_value;
+@@ -651,39 +766,53 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
+ 	if (vdd == PRCM_VDD1) {
+ 		sr_status = sr_stop_vddautocomap(SR1);
+ 
+-		PRM_VC_CMD_VAL_0 = (PRM_VC_CMD_VAL_0 & ~PRM_VC_CMD_ON_MASK) |
+-						(vsel << PRM_VC_CMD_ON_SHIFT);
++		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
++					(vsel << OMAP3430_VC_CMD_ON_SHIFT),
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VC_CMD_VAL_0_OFFSET);
+ 		reg_addr = R_VDD1_SR_CONTROL;
+ 
+ 	} else if (vdd == PRCM_VDD2) {
+ 		sr_status = sr_stop_vddautocomap(SR2);
+ 
+-		PRM_VC_CMD_VAL_1 = (PRM_VC_CMD_VAL_1 & ~PRM_VC_CMD_ON_MASK) |
+-						(vsel << PRM_VC_CMD_ON_SHIFT);
++		prm_rmw_mod_reg_bits(OMAP3430_VC_CMD_ON_MASK,
++					(vsel << OMAP3430_VC_CMD_ON_SHIFT),
++					OMAP3430_GR_MOD,
++					OMAP3_PRM_VC_CMD_VAL_1_OFFSET);
+ 		reg_addr = R_VDD2_SR_CONTROL;
+ 	}
+ 
+-	vc_bypass_value = (vsel << PRM_VC_BYPASS_DATA_SHIFT) |
+-			(reg_addr << PRM_VC_BYPASS_REGADDR_SHIFT) |
+-			(R_SRI2C_SLAVE_ADDR << PRM_VC_BYPASS_SLAVEADDR_SHIFT);
++	vc_bypass_value = (vsel << OMAP3430_DATA_SHIFT) |
++			(reg_addr << OMAP3430_REGADDR_SHIFT) |
++			(R_SRI2C_SLAVE_ADDR << OMAP3430_SLAVEADDR_SHIFT);
+ 
+-	PRM_VC_BYPASS_VAL = vc_bypass_value;
++	prm_write_mod_reg(vc_bypass_value, OMAP3430_GR_MOD,
++			OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
+ 
+-	PRM_VC_BYPASS_VAL |= PRM_VC_BYPASS_VALID;
++	vc_bypass_value = prm_set_mod_reg_bits(OMAP3430_VALID, OMAP3430_GR_MOD,
++					OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
+ 
+-	DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, PRM_VC_BYPASS_VAL);
+-	DPRINTK("PRM_IRQST_MPU %X\n", PRM_IRQSTATUS_MPU);
++	DPRINTK("%s : PRM_VC_BYPASS_VAL %X\n", __func__, vc_bypass_value);
++	DPRINTK("PRM_IRQST_MPU %X\n", prm_read_mod_reg(OCP_MOD,
++					OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
+ 
+-	while ((PRM_VC_BYPASS_VAL & PRM_VC_BYPASS_VALID) != 0x0) {
+-		ret = loop_wait(&loop_cnt, &retries_cnt, 10);
+-		if (ret != PRCM_PASS) {
++	while ((vc_bypass_value & OMAP3430_VALID) != 0x0) {
++		loop_cnt++;
++		if (retries_cnt > 10) {
+ 			printk(KERN_INFO "Loop count exceeded in check SR I2C"
+ 								"write\n");
+-			return ret;
++			return SR_FAIL;
++		}
++		if (loop_cnt > 50) {
++			retries_cnt++;
++			loop_cnt = 0;
++			udelay(10);
+ 		}
++		vc_bypass_value = prm_read_mod_reg(OMAP3430_GR_MOD,
++					OMAP3_PRM_VC_BYPASS_VAL_OFFSET);
+ 	}
+ 
+-	omap_udelay(T2_SMPS_UPDATE_DELAY);
++	udelay(T2_SMPS_UPDATE_DELAY);
+ 
+ 	if (sr_status) {
+ 		if (vdd == PRCM_VDD1)
+@@ -696,13 +825,15 @@ int sr_voltagescale_vcbypass(u32 target_opp, u8 vsel)
+ }
+ 
+ /* Sysfs interface to select SR VDD1 auto compensation */
+-static ssize_t omap_sr_vdd1_autocomp_show(struct kset *subsys, char *buf)
++static ssize_t omap_sr_vdd1_autocomp_show(struct kobject *kobj,
++					struct kobj_attribute *attr, char *buf)
+ {
+ 	return sprintf(buf, "%d\n", sr1.is_autocomp_active);
+ }
+ 
+-static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys,
+-				const char *buf, size_t n)
++static ssize_t omap_sr_vdd1_autocomp_store(struct kobject *kobj,
++					struct kobj_attribute *attr,
++					const char *buf, size_t n)
+ {
+ 	u32 current_vdd1opp_no;
+ 	unsigned short value;
+@@ -722,7 +853,7 @@ static ssize_t omap_sr_vdd1_autocomp_store(struct kset *subsys,
+ 	return n;
+ }
+ 
+-static struct subsys_attribute sr_vdd1_autocomp = {
++static struct kobj_attribute sr_vdd1_autocomp = {
+ 	.attr = {
+ 	.name = __stringify(sr_vdd1_autocomp),
+ 	.mode = 0644,
+@@ -732,13 +863,15 @@ static struct subsys_attribute sr_vdd1_autocomp = {
+ };
+ 
+ /* Sysfs interface to select SR VDD2 auto compensation */
+-static ssize_t omap_sr_vdd2_autocomp_show(struct kset *subsys, char *buf)
++static ssize_t omap_sr_vdd2_autocomp_show(struct kobject *kobj,
++					struct kobj_attribute *attr, char *buf)
+ {
+ 	return sprintf(buf, "%d\n", sr2.is_autocomp_active);
+ }
+ 
+-static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys,
+-				const char *buf, size_t n)
++static ssize_t omap_sr_vdd2_autocomp_store(struct kobject *kobj,
++					struct kobj_attribute *attr,
++					const char *buf, size_t n)
+ {
+ 	u32 current_vdd2opp_no;
+ 	unsigned short value;
+@@ -758,7 +891,7 @@ static ssize_t omap_sr_vdd2_autocomp_store(struct kset *subsys,
+ 	return n;
+ }
+ 
+-static struct subsys_attribute sr_vdd2_autocomp = {
++static struct kobj_attribute sr_vdd2_autocomp = {
+ 	.attr = {
+ 	.name = __stringify(sr_vdd2_autocomp),
+ 	.mode = 0644,
+@@ -774,15 +907,19 @@ static int __init omap3_sr_init(void)
+ 	int ret = 0;
+ 	u8 RdReg;
+ 
+-#ifdef CONFIG_ARCH_OMAP34XX
+-	sr1.fck = clk_get(NULL, "sr1_fck");
+-	if (IS_ERR(sr1.fck))
+-		printk(KERN_ERR "Could not get sr1_fck\n");
+-
+-	sr2.fck = clk_get(NULL, "sr2_fck");
+-	if (IS_ERR(sr2.fck))
+-		printk(KERN_ERR "Could not get sr2_fck\n");
+-#endif /* #ifdef CONFIG_ARCH_OMAP34XX */
++	if (is_sil_rev_greater_than(OMAP3430_REV_ES1_0)) {
++		current_vdd1_opp = PRCM_VDD1_OPP3;
++		current_vdd2_opp = PRCM_VDD2_OPP3;
++	} else {
++		current_vdd1_opp = PRCM_VDD1_OPP1;
++		current_vdd2_opp = PRCM_VDD1_OPP1;
++	}
++	if (cpu_is_omap34xx()) {
++		sr_clk_get(&sr1);
++		sr_clk_get(&sr2);
++	}
++	sr_set_clk_length(&sr1);
++	sr_set_clk_length(&sr2);
+ 
+ 	/* Call the VPConfig, VCConfig, set N Values. */
+ 	sr_set_nvalues(&sr1);
+@@ -794,22 +931,24 @@ static int __init omap3_sr_init(void)
+ 	sr_configure_vc();
+ 
+ 	/* Enable SR on T2 */
+-	ret = t2_in(PM_RECEIVER, &RdReg, R_DCDC_GLOBAL_CFG);
+-	RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
+-	ret |= t2_out(PM_RECEIVER, RdReg, R_DCDC_GLOBAL_CFG);
++	ret = twl4030_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &RdReg,
++					R_DCDC_GLOBAL_CFG);
+ 
++	RdReg |= DCDC_GLOBAL_CFG_ENABLE_SRFLX;
++	ret |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, RdReg,
++					R_DCDC_GLOBAL_CFG);
+ 
+ 	printk(KERN_INFO "SmartReflex driver initialized\n");
+ 
+-	ret = subsys_create_file(&power_subsys, &sr_vdd1_autocomp);
++	ret = sysfs_create_file(power_kobj, &sr_vdd1_autocomp.attr);
+ 	if (ret)
+-		printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
++		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+ 
+-	ret = subsys_create_file(&power_subsys, &sr_vdd2_autocomp);
++	ret = sysfs_create_file(power_kobj, &sr_vdd2_autocomp.attr);
+ 	if (ret)
+-		printk(KERN_ERR "subsys_create_file failed: %d\n", ret);
++		printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
+ 
+ 	return 0;
+ }
+ 
+-arch_initcall(omap3_sr_init);
++late_initcall(omap3_sr_init);
+diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
+index 2091a15..194429e 100644
+--- a/arch/arm/mach-omap2/smartreflex.h
++++ b/arch/arm/mach-omap2/smartreflex.h
+@@ -233,12 +233,18 @@
+ extern u32 current_vdd1_opp;
+ extern u32 current_vdd2_opp;
+ 
++#ifdef CONFIG_OMAP_SMARTREFLEX_TESTING
++#define SR_TESTING_NVALUES 	1
++#else
++#define SR_TESTING_NVALUES 	0
++#endif
++
+ /*
+  * Smartreflex module enable/disable interface.
+  * NOTE: if smartreflex is not enabled from sysfs, these functions will not
+  * do anything.
+  */
+-#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE)
++#ifdef CONFIG_OMAP_SMARTREFLEX
+ void enable_smartreflex(int srid);
+ void disable_smartreflex(int srid);
+ #else
+@@ -246,7 +252,6 @@ static inline void enable_smartreflex(int srid) {}
+ static inline void disable_smartreflex(int srid) {}
+ #endif
+ 
+-
+ #endif
+ 
+ 
+diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
+index b085b07..960c13f 100644
+--- a/arch/arm/plat-omap/Kconfig
++++ b/arch/arm/plat-omap/Kconfig
+@@ -56,6 +56,37 @@ config OMAP_DEBUG_CLOCKDOMAIN
+ 	  for every clockdomain register write.  However, the
+ 	  extra detail costs some memory.
+ 
++config OMAP_SMARTREFLEX
++	bool "SmartReflex support"
++	depends on ARCH_OMAP34XX && TWL4030_CORE
++	help
++	  Say Y if you want to enable SmartReflex.
++
++	  SmartReflex can perform continuous dynamic voltage
++	  scaling around the nominal operating point voltage
++	  according to silicon characteristics and operating
++	  conditions. Enabling SmartReflex reduces power
++	  consumption.
++
++	  Please note, that by default SmartReflex is only
++	  initialized. To enable the automatic voltage
++	  compensation for VDD1 and VDD2, user must write 1 to
++	  /sys/power/sr_vddX_autocomp, where X is 1 or 2.
++
++config OMAP_SMARTREFLEX_TESTING
++	bool "Smartreflex testing support"
++	depends on OMAP_SMARTREFLEX
++	default n
++	help
++	  Say Y if you want to enable SmartReflex testing with SW hardcoded
++	  NVALUES intead of E-fuse NVALUES set in factory silicon testing.
++
++	  In some devices the E-fuse values have not been set, even though
++	  SmartReflex modules are included. Using these hardcoded values set
++	  in software, one can test the SmartReflex features without E-fuse.
++
++	  WARNING: Enabling this option may cause your device to hang!
++
+ config OMAP_RESET_CLOCKS
+ 	bool "Reset unused clocks during boot"
+ 	depends on ARCH_OMAP
+-- 
+1.5.4.3
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/defconfig b/recipes/linux/linux-omap-2.6.26/omap3evm/defconfig
new file mode 100644
index 0000000000..a0ba3d1e0a
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/defconfig
@@ -0,0 +1,1622 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5-omap1
+# Sun Jun 15 21:58:01 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_SMARTREFLEX is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" quiet "
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPUIdle
+#
+
+#
+# CPU idle PM support
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTSDIO=m
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBRF6150 is not set
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_93CX6=m
+# CONFIG_OMAP_STI is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+CONFIG_P54_COMMON=m
+# CONFIG_P54_USB is not set
+# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_GPIO=y
+# CONFIG_TWL4030_MADC is not set
+CONFIG_TWL4030_USB=y
+CONFIG_TWL4030_USB_HS_ULPI=y
+# CONFIG_TWL4030_PWRBUTTON is not set
+# CONFIG_TWL4030_POWEROFF is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_LP5521 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_DETECT=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+# CONFIG_SND_SX1 is not set
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3EVM=y
+CONFIG_SND_SOC_TWL4030=y
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_OMAP_EHCI_PHY_MODE=y
+# CONFIG_OMAP_EHCI_TLL_MODE is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_ISP116X_HCD=y
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/no-empty-flash-warnings.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/no-empty-flash-warnings.patch
new file mode 100644
index 0000000000..ab344b0449
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/no-empty-flash-warnings.patch
@@ -0,0 +1,15 @@
+diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c
+index 1d437de..33b3feb 100644
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -647,8 +647,8 @@ scan_more:
+ 			inbuf_ofs = ofs - buf_ofs;
+ 			while (inbuf_ofs < scan_end) {
+ 				if (unlikely(*(uint32_t *)(&buf[inbuf_ofs]) != 0xffffffff)) {
+-					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
+-					       empty_start, ofs);
++//					printk(KERN_WARNING "Empty flash at 0x%08x ends at 0x%08x\n",
++//					       empty_start, ofs);
+ 					if ((err = jffs2_scan_dirty_space(c, jeb, ofs-empty_start)))
+ 						return err;
+ 					goto scan_more;
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/no-harry-potter.diff b/recipes/linux/linux-omap-2.6.26/omap3evm/no-harry-potter.diff
new file mode 100644
index 0000000000..2bb20ab9c0
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/no-harry-potter.diff
@@ -0,0 +1,11 @@
+--- /tmp/Makefile	2008-04-24 14:36:20.509598016 +0200
++++ git/arch/arm/Makefile	2008-04-24 14:36:31.949546584 +0200
+@@ -47,7 +47,7 @@
+ # Note that GCC does not numerically define an architecture version
+ # macro, but instead defines a whole series of macros which makes
+ # testing for a specific architecture or later rather impossible.
+-arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
++arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+ arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+ # Only override the compiler option if ARMv6. The ARMv6K extensions are
+ # always available in ARMv7
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/soc.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/soc.patch
new file mode 100644
index 0000000000..f4cce21ca7
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/soc.patch
@@ -0,0 +1,1154 @@
+diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
+index 3903ab7..468536d 100644
+--- a/sound/soc/codecs/Kconfig
++++ b/sound/soc/codecs/Kconfig
+@@ -44,3 +44,7 @@ config SND_SOC_CS4270_VD33_ERRATA
+ config SND_SOC_TLV320AIC3X
+ 	tristate
+ 	depends on SND_SOC && I2C
++
++config SND_SOC_TWL4030
++	tristate
++	depends on SND_SOC && I2C
+diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
+index 4e1314c..d2c0b12 100644
+--- a/sound/soc/codecs/Makefile
++++ b/sound/soc/codecs/Makefile
+@@ -6,6 +6,7 @@ snd-soc-wm9712-objs := wm9712.o
+ snd-soc-wm9713-objs := wm9713.o
+ snd-soc-cs4270-objs := cs4270.o
+ snd-soc-tlv320aic3x-objs := tlv320aic3x.o
++snd-soc-twl4030-objs := twl4030.o
+ 
+ obj-$(CONFIG_SND_SOC_AC97_CODEC)	+= snd-soc-ac97.o
+ obj-$(CONFIG_SND_SOC_WM8731)	+= snd-soc-wm8731.o
+@@ -15,3 +16,4 @@ obj-$(CONFIG_SND_SOC_WM9712)	+= snd-soc-wm9712.o
+ obj-$(CONFIG_SND_SOC_WM9713)	+= snd-soc-wm9713.o
+ obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
+ obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
++obj-$(CONFIG_SND_SOC_TWL4030)	+= snd-soc-twl4030.o
+diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
+new file mode 100644
+index 0000000..eb8370c
+--- /dev/null
++++ b/sound/soc/codecs/twl4030.c
+@@ -0,0 +1,625 @@
++/*
++ * ALSA SoC TWL4030 codec driver
++ *
++ * Author:      Steve Sakoman, <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/pm.h>
++#include <linux/i2c.h>
++#include <linux/platform_device.h>
++#include <linux/i2c/twl4030.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/pcm_params.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++#include <sound/initval.h>
++
++#include "twl4030.h"
++
++/*
++ * twl4030 register cache & default register settings
++ */
++static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
++	0x00, // this register not used
++	0x93, // REG_CODEC_MODE		(0x1)
++	0xc3, // REG_OPTION		(0x2)
++	0x00, // REG_UNKNOWN		(0x3)
++	0x00, // REG_MICBIAS_CTL	(0x4)
++	0x34, // REG_ANAMICL		(0x5)
++	0x14, // REG_ANAMICR		(0x6)
++	0x0a, // REG_AVADC_CTL		(0x7)
++	0x00, // REG_ADCMICSEL		(0x8)
++	0x00, // REG_DIGMIXING		(0x9)
++	0x0c, // REG_ATXL1PGA		(0xA)
++	0x0c, // REG_ATXR1PGA		(0xB)
++	0x00, // REG_AVTXL2PGA		(0xC)
++	0x00, // REG_AVTXR2PGA		(0xD)
++	0x01, // REG_AUDIO_IF		(0xE)
++	0x00, // REG_VOICE_IF		(0xF)
++	0x00, // REG_ARXR1PGA		(0x10)
++	0x00, // REG_ARXL1PGA		(0x11)
++	0x6c, // REG_ARXR2PGA		(0x12)
++	0x6c, // REG_ARXL2PGA		(0x13)
++	0x00, // REG_VRXPGA		(0x14)
++	0x00, // REG_VSTPGA		(0x15)
++	0x00, // REG_VRX2ARXPGA		(0x16)
++	0x0c, // REG_AVDAC_CTL		(0x17)
++	0x00, // REG_ARX2VTXPGA		(0x18)
++	0x00, // REG_ARXL1_APGA_CTL	(0x19)
++	0x00, // REG_ARXR1_APGA_CTL	(0x1A)
++	0x4b, // REG_ARXL2_APGA_CTL	(0x1B)
++	0x4b, // REG_ARXR2_APGA_CTL	(0x1C)
++	0x00, // REG_ATX2ARXPGA		(0x1D)
++	0x00, // REG_BT_IF		(0x1E)
++	0x00, // REG_BTPGA		(0x1F)
++	0x00, // REG_BTSTPGA		(0x20)
++	0x00, // REG_EAR_CTL		(0x21)
++	0x24, // REG_HS_SEL		(0x22)
++	0x0a, // REG_HS_GAIN_SET	(0x23)
++	0x00, // REG_HS_POPN_SET	(0x24)
++	0x00, // REG_PREDL_CTL		(0x25)
++	0x00, // REG_PREDR_CTL		(0x26)
++	0x00, // REG_PRECKL_CTL		(0x27)
++	0x00, // REG_PRECKR_CTL		(0x28)
++	0x00, // REG_HFL_CTL		(0x29)
++	0x00, // REG_HFR_CTL		(0x2A)
++	0x00, // REG_ALC_CTL		(0x2B)
++	0x00, // REG_ALC_SET1		(0x2C)
++	0x00, // REG_ALC_SET2		(0x2D)
++	0x00, // REG_BOOST_CTL		(0x2E)
++	0x01, // REG_SOFTVOL_CTL	(0x2F)
++	0x00, // REG_DTMF_FREQSEL	(0x30)
++	0x00, // REG_DTMF_TONEXT1H	(0x31)
++	0x00, // REG_DTMF_TONEXT1L	(0x32)
++	0x00, // REG_DTMF_TONEXT2H	(0x33)
++	0x00, // REG_DTMF_TONEXT2L	(0x34)
++	0x00, // REG_DTMF_TONOFF	(0x35)
++	0x00, // REG_DTMF_WANONOFF	(0x36)
++	0x00, // REG_I2S_RX_SCRAMBLE_H	(0x37)
++	0x00, // REG_I2S_RX_SCRAMBLE_M	(0x38)
++	0x00, // REG_I2S_RX_SCRAMBLE_L	(0x39)
++	0x16, // REG_APLL_CTL		(0x3A)
++	0x00, // REG_DTMF_CTL		(0x3B)
++	0x00, // REG_DTMF_PGA_CTL2	(0x3C)
++	0x00, // REG_DTMF_PGA_CTL1	(0x3D)
++	0x00, // REG_MISC_SET_1		(0x3E)
++	0x00, // REG_PCMBTMUX		(0x3F)
++	0x00, // REG_RX_PATH_SEL	(0x43)
++	0x00, // REG_VDL_APGA_CTL	(0x44)
++	0x00, // REG_VIBRA_CTL		(0x45)
++	0x00, // REG_VIBRA_SET		(0x46)
++	0x00, // REG_VIBRA_PWM_SET	(0x47)
++	0x00, // REG_ANAMIC_GAIN	(0x48)
++	0x00, // REG_MISC_SET_2		(0x49)
++};
++
++static void twl4030_dump_registers(void)
++{
++	int i = 0;
++	u8 data;
++
++	printk(KERN_INFO "TWL 4030 Register dump for Audio Module\n");
++
++	for (i = REG_CODEC_MODE; i <= REG_MISC_SET_2; i++) {
++		twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &data, i);
++		printk(KERN_INFO "Register[0x%02x]=0x%02x\n", i, data);
++	}
++}
++
++struct twl4030_priv {
++	unsigned int dummy;
++};
++
++/*
++ * read twl4030 register cache
++ */
++static inline unsigned int twl4030_read_reg_cache(struct snd_soc_codec *codec,
++	unsigned int reg)
++{
++	u8 *cache = codec->reg_cache;
++
++	return cache[reg];
++}
++
++/*
++ * write twl4030 register cache
++ */
++static inline void twl4030_write_reg_cache(struct snd_soc_codec *codec,
++						u8 reg, u8 value)
++{
++	u8 *cache = codec->reg_cache;
++
++	if (reg >= TWL4030_CACHEREGNUM)
++		return;
++	cache[reg] = value;
++}
++
++/*
++ * write to the twl4030 register space
++ */
++static int twl4030_write(struct snd_soc_codec *codec,
++			unsigned int reg, unsigned int value)
++{
++	twl4030_write_reg_cache(codec, reg, value);
++	return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg);
++}
++
++static void twl4030_init_chip(void)
++{
++	unsigned char byte;
++	int i;
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
++		twl4030_reg[REG_CODEC_MODE] & 0xfd, REG_CODEC_MODE);
++
++	udelay(10); /* delay for power settling */
++
++	for (i = REG_OPTION; i <= REG_MISC_SET_2; i++) {
++		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, twl4030_reg[i], i);
++	}
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
++		twl4030_reg[REG_CODEC_MODE], REG_CODEC_MODE);
++
++	udelay(10); /* delay for power settling */
++
++	/* initiate offset cancellation */
++	twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
++		twl4030_reg[REG_ANAMICL] | 0x80, REG_ANAMICL);
++
++	/* wait for offset cancellation to complete */
++	twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, REG_ANAMICL);
++	while ((byte & 0x80) == 0x80)
++		twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, REG_ANAMICL);
++
++	twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
++		twl4030_reg[REG_MISC_SET_1] | 0x02, REG_MISC_SET_1);
++
++}
++
++static const struct snd_kcontrol_new twl4030_snd_controls[] = {
++	SOC_DOUBLE_R("Master Playback Volume",
++		 REG_ARXL2PGA, REG_ARXR2PGA,
++		0, 127, 0),
++	SOC_DOUBLE_R("Capture Volume",
++		 REG_ATXL1PGA, REG_ATXR1PGA,
++		0, 127, 0),
++};
++
++/* add non dapm controls */
++static int twl4030_add_controls(struct snd_soc_codec *codec)
++{
++	int err, i;
++
++	for (i = 0; i < ARRAY_SIZE(twl4030_snd_controls); i++) {
++		err = snd_ctl_add(codec->card,
++				  snd_soc_cnew(&twl4030_snd_controls[i],
++						codec, NULL));
++		if (err < 0)
++			return err;
++	}
++
++	return 0;
++}
++
++static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
++	SND_SOC_DAPM_INPUT("INL"),
++	SND_SOC_DAPM_INPUT("INR"),
++
++	SND_SOC_DAPM_OUTPUT("OUTL"),
++	SND_SOC_DAPM_OUTPUT("OUTR"),
++
++	SND_SOC_DAPM_DAC("DACL", "Left Playback", SND_SOC_NOPM, 0, 0),
++	SND_SOC_DAPM_DAC("DACR", "Right Playback", SND_SOC_NOPM, 0, 0),
++
++	SND_SOC_DAPM_ADC("ADCL", "Left Capture", SND_SOC_NOPM, 0, 0),
++	SND_SOC_DAPM_ADC("ADCR", "Right Capture", SND_SOC_NOPM, 0, 0),
++};
++
++static const char *intercon[][3] = {
++	/* outputs */
++	{"OUTL", NULL, "DACL"},
++	{"OUTR", NULL, "DACR"},
++
++	/* inputs */
++	{"ADCL", NULL, "INL"},
++	{"ADCR", NULL, "INR"},
++
++	/* terminator */
++	{NULL, NULL, NULL},
++};
++
++static int twl4030_add_widgets(struct snd_soc_codec *codec)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(twl4030_dapm_widgets); i++)
++		snd_soc_dapm_new_control(codec, &twl4030_dapm_widgets[i]);
++
++	/* set up audio path interconnects */
++	for (i = 0; intercon[i][0] != NULL; i++)
++		snd_soc_dapm_connect_input(codec, intercon[i][0],
++			intercon[i][1], intercon[i][2]);
++
++	snd_soc_dapm_new_widgets(codec);
++	return 0;
++}
++
++static int twl4030_dapm_event(struct snd_soc_codec *codec, int event)
++{
++
++	printk(KERN_INFO "TWL4030 Audio Codec dapm event\n");
++	switch (event) {
++	case SNDRV_CTL_POWER_D0: /* full On */
++		break;
++	case SNDRV_CTL_POWER_D1: /* partial On */
++	case SNDRV_CTL_POWER_D2: /* partial On */
++		break;
++	case SNDRV_CTL_POWER_D3hot: /* off, with power */
++		break;
++	case SNDRV_CTL_POWER_D3cold: /* off, without power */
++		break;
++	}
++	codec->dapm_state = event;
++
++	return 0;
++}
++
++static void twl4030_power_up (struct snd_soc_codec *codec, u8 mode)
++{
++	u8 popn, hsgain;
++
++	twl4030_write(codec, REG_CODEC_MODE, mode & ~CODECPDZ);
++	twl4030_write(codec, REG_CODEC_MODE, mode | CODECPDZ);
++	udelay(10);
++
++	popn = twl4030_read_reg_cache(codec, REG_HS_POPN_SET);
++	popn &= RAMP_DELAY;
++	popn |=	VMID_EN | RAMP_DELAY_161MS;
++	twl4030_write(codec, REG_HS_POPN_SET, popn);
++
++	hsgain = HSR_GAIN_0DB| HSL_GAIN_0DB;
++	twl4030_write(codec, REG_HS_GAIN_SET, hsgain);
++
++	popn |= RAMP_EN;
++	twl4030_write(codec, REG_HS_POPN_SET, popn);
++}
++
++static void twl4030_power_down (struct snd_soc_codec *codec)
++{
++	u8 popn, hsgain, mode;
++
++	popn = twl4030_read_reg_cache(codec, REG_HS_POPN_SET);
++	popn &= ~RAMP_EN;
++	twl4030_write(codec, REG_HS_POPN_SET, popn);
++
++	hsgain = HSR_GAIN_PWR_DOWN | HSL_GAIN_PWR_DOWN;
++	twl4030_write(codec, REG_HS_GAIN_SET, hsgain);
++
++	popn &= ~VMID_EN;
++	twl4030_write(codec, REG_HS_POPN_SET, popn);
++
++	mode = twl4030_read_reg_cache(codec, REG_CODEC_MODE);
++	mode &= ~CODECPDZ;
++	twl4030_write(codec, REG_CODEC_MODE, mode);
++	udelay(10);
++}
++
++
++static int twl4030_hw_params(struct snd_pcm_substream *substream,
++			   struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_device *socdev = rtd->socdev;
++	struct snd_soc_codec *codec = socdev->codec;
++	struct twl4030_priv *twl4030 = codec->private_data;
++	u8 mode, old_mode, format, old_format;
++
++
++	/* bit rate */
++	old_mode = twl4030_read_reg_cache(codec, REG_CODEC_MODE) & ~CODECPDZ;
++	mode = old_mode;
++	mode &= ~APLL_RATE;
++	switch (params_rate(params)) {
++	case 44100:
++		mode |= APLL_RATE_44100;
++		break;
++	case 48000:
++		mode |= APLL_RATE_48000;
++		break;
++	default:
++		printk(KERN_INFO "TWL4030 hw params: unknown rate %d\n", params_rate(params));
++		return -EINVAL;
++	}
++
++	if (mode != old_mode) {
++		/* change rate and turn codec back on */
++		twl4030_write(codec, REG_CODEC_MODE, mode);
++		mode |= CODECPDZ;
++		twl4030_write(codec, REG_CODEC_MODE, mode);
++	}
++
++	/* sample size */
++	old_format = twl4030_read_reg_cache(codec, REG_AUDIO_IF);
++	format = old_format;
++	format &= ~DATA_WIDTH;
++	switch (params_format(params)) {
++	case SNDRV_PCM_FORMAT_S16_LE:
++		format |= DATA_WIDTH_16S_16W;
++		break;
++	case SNDRV_PCM_FORMAT_S24_LE:
++		format |= DATA_WIDTH_32S_24W;
++		break;
++	default:
++		printk(KERN_INFO "TWL4030 hw params: unknown format %d\n", params_format(params));
++		return -EINVAL;
++	}
++
++	if (format != old_format) {
++
++		/* turn off codec before changing format */
++		mode = twl4030_read_reg_cache(codec, REG_CODEC_MODE);
++		mode &= ~CODECPDZ;
++		twl4030_write(codec, REG_CODEC_MODE, mode);
++
++		/* change format */
++		twl4030_write(codec, REG_AUDIO_IF, format);
++	
++		/* turn on codec */
++		mode |= CODECPDZ;
++		twl4030_write(codec, REG_CODEC_MODE, mode);
++	}
++	return 0;
++}
++
++static int twl4030_mute(struct snd_soc_codec_dai *dai, int mute)
++{
++	struct snd_soc_codec *codec = dai->codec;
++
++	u8 ldac_reg = twl4030_read_reg_cache(codec, REG_ARXL2PGA);
++	u8 rdac_reg = twl4030_read_reg_cache(codec, REG_ARXR2PGA);
++
++	if (mute) {
++		/* printk(KERN_INFO "TWL4030 Audio Codec mute\n"); */
++		twl4030_write(codec, REG_ARXL2PGA, 0x00);
++		twl4030_write(codec, REG_ARXR2PGA, 0x00);
++		twl4030_write_reg_cache(codec, REG_ARXL2PGA, ldac_reg);
++		twl4030_write_reg_cache(codec, REG_ARXR2PGA, rdac_reg);
++	}
++	else {
++		/* printk(KERN_INFO "TWL4030 Audio Codec unmute: %02x/%02x\n", ldac_reg, rdac_reg); */
++		twl4030_write(codec, REG_ARXL2PGA, ldac_reg);
++		twl4030_write(codec, REG_ARXR2PGA, rdac_reg);
++	}
++
++	return 0;
++}
++
++static int twl4030_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
++			     unsigned int fmt)
++{
++	struct snd_soc_codec *codec = codec_dai->codec;
++	struct twl4030_priv *twl4030 = codec->private_data;
++	u8 mode, old_format, format;
++
++	/* get format */
++	old_format = twl4030_read_reg_cache(codec, REG_AUDIO_IF);
++	format = old_format;
++
++	/* set master/slave audio interface */
++	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
++	case SND_SOC_DAIFMT_CBM_CFM:
++		/* printk(KERN_INFO "TWL4030 set dai fmt: master\n"); */
++		format &= ~(AIF_SLAVE_EN);
++		format |= CLK256FS_EN;
++		break;
++	case SND_SOC_DAIFMT_CBS_CFS:
++		/* printk(KERN_INFO "TWL4030 set dai fmt: slave\n"); */
++		format &= ~(CLK256FS_EN);
++ 		format |= AIF_SLAVE_EN;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	/* interface format */
++	format &= ~AIF_FORMAT;
++	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
++	case SND_SOC_DAIFMT_I2S:
++		/* printk(KERN_INFO "TWL4030 set dai fmt: i2s\n"); */
++		format |= AIF_FORMAT_CODEC;
++		break;
++	default:
++		return -EINVAL;
++	}
++
++	if (format != old_format) {
++
++		/* turn off codec before changing format */
++		mode = twl4030_read_reg_cache(codec, REG_CODEC_MODE);
++		mode &= ~CODECPDZ;
++		twl4030_write(codec, REG_CODEC_MODE, mode);
++
++		/* change format */
++		twl4030_write(codec, REG_AUDIO_IF, format);
++	
++		mode |= CODECPDZ;
++		twl4030_write(codec, REG_CODEC_MODE, mode);
++	}
++
++	return 0;
++}
++
++#define TWL4030_RATES	 SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000
++#define TWL4030_FORMATS	 SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE
++
++struct snd_soc_codec_dai twl4030_dai = {
++	.name = "twl4030",
++	.playback = {
++		.stream_name = "Playback",
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = TWL4030_RATES,
++		.formats = TWL4030_FORMATS,},
++	.capture = {
++		.stream_name = "Capture",
++		.channels_min = 2,
++		.channels_max = 2,
++		.rates = TWL4030_RATES,
++		.formats = TWL4030_FORMATS,},
++	.ops = {
++		.hw_params = twl4030_hw_params,
++	},
++	.dai_ops = {
++		.digital_mute = twl4030_mute,
++		.set_fmt = twl4030_set_dai_fmt,
++	}
++};
++
++EXPORT_SYMBOL_GPL(twl4030_dai);
++
++static int twl4030_suspend(struct platform_device *pdev, pm_message_t state)
++{
++	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++	struct snd_soc_codec *codec = socdev->codec;
++
++	printk(KERN_INFO "TWL4030 Audio Codec suspend\n");
++	twl4030_dapm_event(codec, SNDRV_CTL_POWER_D3cold);
++
++	return 0;
++}
++
++static int twl4030_resume(struct platform_device *pdev)
++{
++	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++	struct snd_soc_codec *codec = socdev->codec;
++	int i;
++	u16 *cache = codec->reg_cache;
++
++	printk(KERN_INFO "TWL4030 Audio Codec resume\n");
++	/* Sync reg_cache with the hardware */
++	for (i = REG_CODEC_MODE; i <= REG_MISC_SET_2; i++) {
++		twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, cache[i], i);
++	}
++	twl4030_dapm_event(codec, SNDRV_CTL_POWER_D3hot);
++	twl4030_dapm_event(codec, codec->suspend_dapm_state);
++	return 0;
++}
++
++/*
++ * initialize the driver
++ * register the mixer and dsp interfaces with the kernel
++ */
++
++static int twl4030_init(struct snd_soc_device *socdev)
++{
++	struct snd_soc_codec *codec = socdev->codec;
++	int ret = 0;
++
++	printk(KERN_INFO "TWL4030 Audio Codec init \n");
++
++	codec->name = "twl4030";
++	codec->owner = THIS_MODULE;
++	codec->read = twl4030_read_reg_cache;
++	codec->write = twl4030_write;
++	codec->dapm_event = twl4030_dapm_event;
++	codec->dai = &twl4030_dai;
++	codec->num_dai = 1;
++	codec->reg_cache_size = sizeof(twl4030_reg);
++	codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg), GFP_KERNEL);
++	if (codec->reg_cache == NULL)
++		return -ENOMEM;
++
++	/* register pcms */
++	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
++	if (ret < 0) {
++		printk(KERN_ERR "twl4030: failed to create pcms\n");
++		goto pcm_err;
++	}
++
++	twl4030_add_controls(codec);
++	twl4030_add_widgets(codec);
++
++	ret = snd_soc_register_card(socdev);
++	if (ret < 0) {
++		printk(KERN_ERR "twl4030: failed to register card\n");
++		goto card_err;
++	}
++
++	twl4030_init_chip();
++	twl4030_power_up(codec, APLL_RATE_44100 | OPT_MODE);
++
++	return ret;
++
++card_err:
++	printk(KERN_INFO "TWL4030 Audio Codec init card error\n");
++	snd_soc_free_pcms(socdev);
++	snd_soc_dapm_free(socdev);
++pcm_err:
++	printk(KERN_INFO "TWL4030 Audio Codec init pcm error\n");
++	kfree(codec->reg_cache);
++	return ret;
++}
++
++static struct snd_soc_device *twl4030_socdev;
++
++static int twl4030_probe(struct platform_device *pdev)
++{
++	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++	struct snd_soc_codec *codec;
++	struct twl4030_priv *twl4030;
++
++	codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
++	if (codec == NULL)
++		return -ENOMEM;
++
++	twl4030 = kzalloc(sizeof(struct twl4030_priv), GFP_KERNEL);
++	if (twl4030 == NULL) {
++		kfree(codec);
++		return -ENOMEM;
++	}
++
++	codec->private_data = twl4030;
++	socdev->codec = codec;
++	mutex_init(&codec->mutex);
++	INIT_LIST_HEAD(&codec->dapm_widgets);
++	INIT_LIST_HEAD(&codec->dapm_paths);
++
++	twl4030_socdev = socdev;
++	twl4030_init(socdev);
++
++	return 0;
++}
++
++static int twl4030_remove(struct platform_device *pdev)
++{
++	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
++	struct snd_soc_codec *codec = socdev->codec;
++
++	printk(KERN_INFO "TWL4030 Audio Codec remove\n");
++	kfree(codec->private_data);
++	kfree(codec);
++
++	return 0;
++}
++
++struct snd_soc_codec_device soc_codec_dev_twl4030 = {
++	.probe = twl4030_probe,
++	.remove = twl4030_remove,
++	.suspend = twl4030_suspend,
++	.resume = twl4030_resume,
++};
++EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
++
++MODULE_DESCRIPTION("ASoC TWL4030 codec driver");
++MODULE_AUTHOR("Steve Sakoman");
++MODULE_LICENSE("GPL");
+diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h
+new file mode 100644
+index 0000000..e126f96
+--- /dev/null
++++ b/sound/soc/codecs/twl4030.h
+@@ -0,0 +1,152 @@
++/*
++ * ALSA SoC TWL4030 codec driver
++ *
++ * Author:      Steve Sakoman, <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __TWL4030_AUDIO_H__
++#define __TWL4030_AUDIO_H__
++
++#define REG_CODEC_MODE		0x1
++#define REG_OPTION		0x2
++#define REG_UNKNOWN		0x3
++#define REG_MICBIAS_CTL		0x4
++#define REG_ANAMICL		0x5
++#define REG_ANAMICR		0x6
++#define REG_AVADC_CTL		0x7
++#define REG_ADCMICSEL		0x8
++#define REG_DIGMIXING		0x9
++#define REG_ATXL1PGA		0xA
++#define REG_ATXR1PGA		0xB
++#define REG_AVTXL2PGA		0xC
++#define REG_AVTXR2PGA		0xD
++#define REG_AUDIO_IF		0xE
++#define REG_VOICE_IF		0xF
++#define REG_ARXR1PGA		0x10
++#define REG_ARXL1PGA		0x11
++#define REG_ARXR2PGA		0x12
++#define REG_ARXL2PGA		0x13
++#define REG_VRXPGA		0x14
++#define REG_VSTPGA		0x15
++#define REG_VRX2ARXPGA		0x16
++#define REG_AVDAC_CTL		0x17
++#define REG_ARX2VTXPGA		0x18
++#define REG_ARXL1_APGA_CTL	0x19
++#define REG_ARXR1_APGA_CTL	0x1A
++#define REG_ARXL2_APGA_CTL	0x1B
++#define REG_ARXR2_APGA_CTL	0x1C
++#define REG_ATX2ARXPGA		0x1D
++#define REG_BT_IF		0x1E
++#define REG_BTPGA		0x1F
++#define REG_BTSTPGA		0x20
++#define REG_EAR_CTL		0x21
++#define REG_HS_SEL		0x22
++#define REG_HS_GAIN_SET		0x23
++#define REG_HS_POPN_SET		0x24
++#define REG_PREDL_CTL		0x25
++#define REG_PREDR_CTL		0x26
++#define REG_PRECKL_CTL		0x27
++#define REG_PRECKR_CTL		0x28
++#define REG_HFL_CTL		0x29
++#define REG_HFR_CTL		0x2A
++#define REG_ALC_CTL		0x2B
++#define REG_ALC_SET1		0x2C
++#define REG_ALC_SET2		0x2D
++#define REG_BOOST_CTL		0x2E
++#define REG_SOFTVOL_CTL		0x2F
++#define REG_DTMF_FREQSEL	0x30
++#define REG_DTMF_TONEXT1H	0x31
++#define REG_DTMF_TONEXT1L	0x32
++#define REG_DTMF_TONEXT2H	0x33
++#define REG_DTMF_TONEXT2L	0x34
++#define REG_DTMF_TONOFF		0x35
++#define REG_DTMF_WANONOFF	0x36
++#define REG_I2S_RX_SCRAMBLE_H	0x37
++#define REG_I2S_RX_SCRAMBLE_M	0x38
++#define REG_I2S_RX_SCRAMBLE_L	0x39
++#define REG_APLL_CTL		0x3A
++#define REG_DTMF_CTL		0x3B
++#define REG_DTMF_PGA_CTL2	0x3C
++#define REG_DTMF_PGA_CTL1	0x3D
++#define REG_MISC_SET_1		0x3E
++#define REG_PCMBTMUX		0x3F
++#define REG_RX_PATH_SEL		0x43
++#define REG_VDL_APGA_CTL	0x44
++#define REG_VIBRA_CTL		0x45
++#define REG_VIBRA_SET		0x46
++#define REG_VIBRA_PWM_SET	0x47
++#define REG_ANAMIC_GAIN		0x48
++#define REG_MISC_SET_2		0x49
++
++#define TWL4030_CACHEREGNUM	REG_MISC_SET_2 + 1
++
++/* Bitfield Definitions */
++
++/* CODEC_MODE (0x01) Fields */
++
++#define APLL_RATE		0xF0
++#define APLL_RATE_8000		0x00
++#define APLL_RATE_11025		0x10
++#define APLL_RATE_12000		0x20
++#define APLL_RATE_16000		0x40
++#define APLL_RATE_22050		0x50
++#define APLL_RATE_24000		0x60
++#define APLL_RATE_32000		0x80
++#define APLL_RATE_44100		0x90
++#define APLL_RATE_48000		0xa0
++#define SEL_16K			0x04
++#define CODECPDZ		0x02
++#define OPT_MODE		0x01
++
++/* AUDIO_IF (0x0E) Fields */
++
++#define AIF_SLAVE_EN		0x80
++#define DATA_WIDTH		0x60
++#define DATA_WIDTH_16S_16W	0x00
++#define DATA_WIDTH_32S_16W	0x40
++#define DATA_WIDTH_32S_24W	0x60
++#define AIF_FORMAT		0x18
++#define AIF_FORMAT_CODEC	0x00
++#define AIF_FORMAT_LEFT		0x08
++#define AIF_FORMAT_RIGHT	0x10
++#define AIF_FORMAT_TDM		0x18
++#define AIF_TRI_EN		0x04
++#define CLK256FS_EN		0x02
++#define AIF_EN			0x01
++
++/* HS_GAIN_SET (0x23) Fields */
++
++#define HSR_GAIN		0x0c
++#define HSR_GAIN_PWR_DOWN	0x00
++#define HSR_GAIN_PLUS_6DB	0x04
++#define HSR_GAIN_0DB		0x08
++#define HSR_GAIN_MINUS_6DB	0x0c
++#define HSL_GAIN		0x0c
++#define HSL_GAIN_PWR_DOWN	0x00
++#define HSL_GAIN_PLUS_6DB	0x01
++#define HSL_GAIN_0DB		0x02
++#define HSL_GAIN_MINUS_6DB	0x03
++
++/* HS_POPN_SET (0x24) Fields */
++
++#define VMID_EN			0x40
++#define	EXTMUTE			0x20
++#define RAMP_DELAY		0x1C
++#define RAMP_DELAY_20MS		0x00
++#define RAMP_DELAY_40MS		0x04
++#define RAMP_DELAY_81MS		0x08
++#define RAMP_DELAY_161MS	0x0c
++#define RAMP_DELAY_323MS	0x10
++#define RAMP_DELAY_645MS	0x14
++#define RAMP_DELAY_1291MS	0x18
++#define RAMP_DELAY_2581MS	0x1c
++#define RAMP_EN			0x02
++
++extern struct snd_soc_codec_dai twl4030_dai;
++extern struct snd_soc_codec_device soc_codec_dev_twl4030;
++
++#endif	/* End of __TWL4030_AUDIO_H__ */
+diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
+index 0230d83..8703cea 100644
+--- a/sound/soc/omap/Kconfig
++++ b/sound/soc/omap/Kconfig
+@@ -16,4 +16,20 @@ config SND_OMAP_SOC_N810
+ 	help
+ 	  Say Y if you want to add support for SoC audio on Nokia N810.
+ 
++config SND_OMAP_SOC_OMAP3EVM
++	tristate "SoC Audio support for OMAP3 EVM"
++	depends on SND_OMAP_SOC && MACH_OMAP3EVM
++	select SND_OMAP_SOC_MCBSP
++	select SND_SOC_TWL4030
++	help
++	  Say Y if you want to add support for SoC audio on the OMAP3 EVM.
++
++config SND_OMAP_SOC_OMAP3BEAGLE
++	tristate "SoC Audio support for OMAP3 Beagle"
++	depends on SND_OMAP_SOC && MACH_OMAP3_BEAGLE
++	select SND_OMAP_SOC_MCBSP
++	select SND_SOC_TWL4030
++	help
++	  Say Y if you want to add support for SoC audio on the OMAP3 Beagle.
++
+ endmenu
+diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile
+index d8d8d58..638a240 100644
+--- a/sound/soc/omap/Makefile
++++ b/sound/soc/omap/Makefile
+@@ -7,5 +7,10 @@ obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o
+ 
+ # OMAP Machine Support
+ snd-soc-n810-objs := n810.o
++snd-soc-omap3evm-objs := omap3evm.o
++snd-soc-omap3beagle-objs := omap3beagle.o
+ 
+ obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
++obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o
++obj-$(CONFIG_SND_OMAP_SOC_OMAP3BEAGLE) += snd-soc-omap3beagle.o
++
+diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c
+new file mode 100644
+index 0000000..878f894
+--- /dev/null
++++ b/sound/soc/omap/omap3beagle.c
+@@ -0,0 +1,142 @@
++/*
++ * omap3beagle.c  --  SoC audio for OMAP3 Beagle
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/mcbsp.h>
++
++#include "omap-mcbsp.h"
++#include "omap-pcm.h"
++#include "../codecs/twl4030.h"
++
++static int omap3beagle_hw_params(struct snd_pcm_substream *substream,
++	struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++	int ret;
++
++	/* Set codec DAI configuration */
++	ret = codec_dai->dai_ops.set_fmt(codec_dai,
++					 SND_SOC_DAIFMT_I2S |
++					 SND_SOC_DAIFMT_NB_NF |
++					 SND_SOC_DAIFMT_CBM_CFM);
++	if (ret < 0) {
++	printk(KERN_INFO "can't set codec DAI configuration\n");
++		return ret;
++	}
++
++	/* Set cpu DAI configuration */
++	ret = cpu_dai->dai_ops.set_fmt(cpu_dai,
++				       SND_SOC_DAIFMT_I2S |
++				       SND_SOC_DAIFMT_NB_NF |
++				       SND_SOC_DAIFMT_CBM_CFM);
++	if (ret < 0) {
++	printk(KERN_INFO "can't set cpu DAI configuration\n");
++		return ret;
++	}
++
++	return 0;
++}
++
++static struct snd_soc_ops omap3beagle_ops = {
++	.hw_params = omap3beagle_hw_params,
++};
++
++/* Digital audio interface glue - connects codec <--> CPU */
++static struct snd_soc_dai_link omap3beagle_dai = {
++	.name = "TWL4030",
++	.stream_name = "TWL4030",
++	.cpu_dai = &omap_mcbsp_dai[0],
++	.codec_dai = &twl4030_dai,
++	.ops = &omap3beagle_ops,
++};
++
++/* Audio machine driver */
++static struct snd_soc_machine snd_soc_machine_omap3beagle = {
++	.name = "omap3beagle",
++	.dai_link = &omap3beagle_dai,
++	.num_links = 1,
++};
++
++/* Audio subsystem */
++static struct snd_soc_device omap3beagle_snd_devdata = {
++	.machine = &snd_soc_machine_omap3beagle,
++	.platform = &omap_soc_platform,
++	.codec_dev = &soc_codec_dev_twl4030,
++};
++
++static struct platform_device *omap3beagle_snd_device;
++
++static int __init omap3beagle_soc_init(void)
++{
++	int ret;
++
++	printk(KERN_INFO "OMAP3 Beagle SoC init\n");
++	if (!machine_is_omap3_beagle()) {
++		printk(KERN_INFO "Not OMAP3 Beagle!\n");
++		return -ENODEV;
++	}
++
++	omap3beagle_snd_device = platform_device_alloc("soc-audio", -1);
++	if (!omap3beagle_snd_device) {
++		printk(KERN_INFO "Platform device allocation failed\n");	
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(omap3beagle_snd_device, &omap3beagle_snd_devdata);
++	omap3beagle_snd_devdata.dev = &omap3beagle_snd_device->dev;
++	*(unsigned int *)omap3beagle_dai.cpu_dai->private_data = 1; /* McBSP2 */
++
++	ret = platform_device_add(omap3beagle_snd_device);
++	if (ret)
++		goto err1;
++
++	return 0;
++
++err1:
++	printk(KERN_INFO "Unable to add platform device\n");		
++	platform_device_put(omap3beagle_snd_device);
++
++	return ret;
++}
++
++static void __exit omap3beagle_soc_exit(void)
++{
++	printk(KERN_INFO "OMAP3 Beagle SoC exit\n");
++	platform_device_unregister(omap3beagle_snd_device);
++}
++
++module_init(omap3beagle_soc_init);
++module_exit(omap3beagle_soc_exit);
++
++MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>");
++MODULE_DESCRIPTION("ALSA SoC OMAP3 Beagle");
++MODULE_LICENSE("GPL");
+diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c
+new file mode 100644
+index 0000000..a64c788
+--- /dev/null
++++ b/sound/soc/omap/omap3evm.c
+@@ -0,0 +1,142 @@
++/*
++ * omap3evm.c  --  SoC audio for OMAP3 EVM
++ *
++ * Author: Steve Sakoman <steve@sakoman.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/clk.h>
++#include <linux/platform_device.h>
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/soc-dapm.h>
++
++#include <asm/mach-types.h>
++#include <asm/arch/hardware.h>
++#include <asm/arch/gpio.h>
++#include <asm/arch/mcbsp.h>
++
++#include "omap-mcbsp.h"
++#include "omap-pcm.h"
++#include "../codecs/twl4030.h"
++
++static int omap3evm_hw_params(struct snd_pcm_substream *substream,
++	struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_codec_dai *codec_dai = rtd->dai->codec_dai;
++	struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
++	int ret;
++
++	/* Set codec DAI configuration */
++	ret = codec_dai->dai_ops.set_fmt(codec_dai,
++					 SND_SOC_DAIFMT_I2S |
++					 SND_SOC_DAIFMT_NB_NF |
++					 SND_SOC_DAIFMT_CBM_CFM);
++	if (ret < 0) {
++	printk(KERN_INFO "can't set codec DAI configuration\n");
++		return ret;
++	}
++
++	/* Set cpu DAI configuration */
++	ret = cpu_dai->dai_ops.set_fmt(cpu_dai,
++				       SND_SOC_DAIFMT_I2S |
++				       SND_SOC_DAIFMT_NB_NF |
++				       SND_SOC_DAIFMT_CBM_CFM);
++	if (ret < 0) {
++	printk(KERN_INFO "can't set cpu DAI configuration\n");
++		return ret;
++	}
++
++	return 0;
++}
++
++static struct snd_soc_ops omap3evm_ops = {
++	.hw_params = omap3evm_hw_params,
++};
++
++/* Digital audio interface glue - connects codec <--> CPU */
++static struct snd_soc_dai_link omap3evm_dai = {
++	.name = "TWL4030",
++	.stream_name = "TWL4030",
++	.cpu_dai = &omap_mcbsp_dai[0],
++	.codec_dai = &twl4030_dai,
++	.ops = &omap3evm_ops,
++};
++
++/* Audio machine driver */
++static struct snd_soc_machine snd_soc_machine_omap3evm = {
++	.name = "omap3evm",
++	.dai_link = &omap3evm_dai,
++	.num_links = 1,
++};
++
++/* Audio subsystem */
++static struct snd_soc_device omap3evm_snd_devdata = {
++	.machine = &snd_soc_machine_omap3evm,
++	.platform = &omap_soc_platform,
++	.codec_dev = &soc_codec_dev_twl4030,
++};
++
++static struct platform_device *omap3evm_snd_device;
++
++static int __init omap3evm_soc_init(void)
++{
++	int ret;
++
++	printk(KERN_INFO "OMAP3 EVM SoC init\n");
++	if (!machine_is_omap3evm()) {
++		printk(KERN_INFO "Not OMAP3 EVM!\n");
++		return -ENODEV;
++	}
++
++	omap3evm_snd_device = platform_device_alloc("soc-audio", -1);
++	if (!omap3evm_snd_device) {
++		printk(KERN_INFO "Platform device allocation failed\n");	
++		return -ENOMEM;
++	}
++
++	platform_set_drvdata(omap3evm_snd_device, &omap3evm_snd_devdata);
++	omap3evm_snd_devdata.dev = &omap3evm_snd_device->dev;
++	*(unsigned int *)omap3evm_dai.cpu_dai->private_data = 1; /* McBSP2 */
++
++	ret = platform_device_add(omap3evm_snd_device);
++	if (ret)
++		goto err1;
++
++	return 0;
++
++err1:
++	printk(KERN_INFO "Unable to add platform device\n");		
++	platform_device_put(omap3evm_snd_device);
++
++	return ret;
++}
++
++static void __exit omap3evm_soc_exit(void)
++{
++	printk(KERN_INFO "OMAP3 EVM SoC exit\n");
++	platform_device_unregister(omap3evm_snd_device);
++}
++
++module_init(omap3evm_soc_init);
++module_exit(omap3evm_soc_exit);
++
++MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>");
++MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
++MODULE_LICENSE("GPL");
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/timer-suppression.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/timer-suppression.patch
new file mode 100644
index 0000000000..04362c96e3
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/timer-suppression.patch
@@ -0,0 +1,43 @@
+diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
+index b854a89..26f5569 100644
+--- a/kernel/time/tick-sched.c
++++ b/kernel/time/tick-sched.c
+@@ -253,6 +253,16 @@ void tick_nohz_stop_sched_tick(void)
+ 
+ 	/* Schedule the tick, if we are at least one jiffie off */
+ 	if ((long)delta_jiffies >= 1) {
++		/*
++		 * calculate the expiry time for the next timer wheel
++		 * timer
++		 */
++		expires = ktime_add_ns(last_update, tick_period.tv64 *
++					delta_jiffies);
++
++		/* Skip reprogram of event if its not changed */
++		if(ts->tick_stopped && ktime_equal(expires, dev->next_event))
++		goto out2;
+ 
+ 		if (delta_jiffies > 1)
+ 			cpu_set(cpu, nohz_cpu_mask);
+@@ -304,12 +314,7 @@ void tick_nohz_stop_sched_tick(void)
+ 			goto out;
+ 		}
+ 
+-		/*
+-		 * calculate the expiry time for the next timer wheel
+-		 * timer
+-		 */
+-		expires = ktime_add_ns(last_update, tick_period.tv64 *
+-				       delta_jiffies);
++		/* Mark expiries */
+ 		ts->idle_expires = expires;
+ 
+ 		if (ts->nohz_mode == NOHZ_MODE_HIGHRES) {
+@@ -328,6 +333,7 @@ void tick_nohz_stop_sched_tick(void)
+ 		tick_do_update_jiffies64(ktime_get());
+ 		cpu_clear(cpu, nohz_cpu_mask);
+ 	}
++out2:	
+ 	raise_softirq_irqoff(TIMER_SOFTIRQ);
+ out:
+ 	ts->next_jiffies = next_jiffies;
diff --git a/recipes/linux/linux-omap-2.6.26/omap3evm/touchscreen.patch b/recipes/linux/linux-omap-2.6.26/omap3evm/touchscreen.patch
new file mode 100644
index 0000000000..2325c401e4
--- /dev/null
+++ b/recipes/linux/linux-omap-2.6.26/omap3evm/touchscreen.patch
@@ -0,0 +1,22 @@
+diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
+index d8109ae..f8ce669 100644
+--- a/arch/arm/mach-omap2/board-omap3evm.c
++++ b/arch/arm/mach-omap2/board-omap3evm.c
+@@ -128,8 +128,16 @@ static int ads7846_get_pendown_state(void)
+ }
+ 
+ struct ads7846_platform_data ads7846_config = {
++	.x_max			= 0x0fff,
++	.y_max			= 0x0fff,
++	.x_plate_ohms		= 180,
++	.pressure_max		= 255,
++	.debounce_max		= 10,
++	.debounce_tol		= 3,
++	.debounce_rep		= 1,
+ 	.get_pendown_state	= ads7846_get_pendown_state,
+ 	.keep_vref_on		= 1,
++	.settle_delay_usecs	= 150,
+ };
+ 
+ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+
author	Denys Dmytriyenko <denis@denix.org>	2009-03-17 14:32:59 -0400
committer	Denys Dmytriyenko <denis@denix.org>	2009-03-17 14:32:59 -0400
commit	709c4d66e0b107ca606941b988bad717c0b45d9b (patch)
tree	37ee08b1eb308f3b2b6426d5793545c38396b838 /recipes/linux/linux-omap-2.6.26/omap3evm
parent	fa6cd5a3b993f16c27de4ff82b42684516d433ba (diff)