rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 163 insertions, 0 deletions

diff --git a/recipes/linux/linux-mtx-2-2.4.27/47-au1000_eth.patch b/recipes/linux/linux-mtx-2-2.4.27/47-au1000_eth.patch
new file mode 100644
index 0000000000..b1eb6c990d
--- /dev/null
+++ b/recipes/linux/linux-mtx-2-2.4.27/47-au1000_eth.patch
@@ -0,0 +1,163 @@
+--- linux/drivers/net/au1000_eth.h	2003-06-05 02:00:35.000000000 +0200
++++ patch/drivers/net/au1000_eth.h	2006-10-13 14:36:42.237757250 +0200
+@@ -233,3 +233,11 @@
+ 	struct timer_list timer;
+ 	spinlock_t lock;       /* Serialise access to device */
+ };
++
++struct mii_ioctl_data {
++	u16             phy_id;
++	u16             reg_num;
++	u16             val_in;
++	u16             val_out;
++};
++
+--- linux/drivers/net/au1000_eth.c	2004-11-24 12:12:42.000000000 +0100
++++ patch/drivers/net/au1000_eth.c	2006-10-13 14:36:36.649408000 +0200
+@@ -83,8 +83,6 @@
+ static int au1000_set_config(struct net_device *dev, struct ifmap *map);
+ static void set_rx_mode(struct net_device *);
+ static struct net_device_stats *au1000_get_stats(struct net_device *);
+-static inline void update_tx_stats(struct net_device *, u32, u32);
+-static inline void update_rx_stats(struct net_device *, u32);
+ static void au1000_timer(unsigned long);
+ static int au1000_ioctl(struct net_device *, struct ifreq *, int);
+ static int mdio_read(struct net_device *, int, int);
+@@ -674,6 +672,7 @@
+ 	{"Broadcom BCM5201 10/100 BaseT PHY",0x0040,0x6212, &bcm_5201_ops,0},
+ 	{"Broadcom BCM5221 10/100 BaseT PHY",0x0040,0x61e4, &bcm_5201_ops,0},
+ 	{"Broadcom BCM5222 10/100 BaseT PHY",0x0040,0x6322, &bcm_5201_ops,1},
++	{"Broadcom BCM5241 10/100 BaseT PHY",0x0143,0xBC31, &bcm_5201_ops,0},
+ 	{"AMD 79C901 HomePNA PHY",0x0000,0x35c8, &am79c901_ops,0},
+ 	{"AMD 79C874 10/100 BaseT PHY",0x0022,0x561b, &am79c874_ops,0},
+ 	{"LSI 80227 10/100 BaseT PHY",0x0016,0xf840, &lsi_80227_ops,0},
+@@ -1389,6 +1388,7 @@
+ 		control |= MAC_FULL_DUPLEX;
+ 	}
+ 	aup->mac->control = control;
++	aup->mac->vlan1_tag = 0x8100; /* activate vlan support */
+ 	au_sync();
+ 
+ 	spin_unlock_irqrestore(&aup->lock, flags);
+@@ -1539,16 +1539,11 @@
+ 	}
+ }
+ 
+-
+-static inline void 
+-update_tx_stats(struct net_device *dev, u32 status, u32 pkt_len)
++static void update_tx_stats(struct net_device *dev, u32 status)
+ {
+ 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
+ 	struct net_device_stats *ps = &aup->stats;
+ 
+-	ps->tx_packets++;
+-	ps->tx_bytes += pkt_len;
+-
+ 	if (status & TX_FRAME_ABORTED) {
+ 		if (dev->if_port == IF_PORT_100BASEFX) {
+ 			if (status & (TX_JAB_TIMEOUT | TX_UNDERRUN)) {
+@@ -1581,7 +1576,7 @@
+ 	ptxd = aup->tx_dma_ring[aup->tx_tail];
+ 
+ 	while (ptxd->buff_stat & TX_T_DONE) {
+-		update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
++		update_tx_stats(dev, ptxd->status);
+ 		ptxd->buff_stat &= ~TX_T_DONE;
+ 		ptxd->len = 0;
+ 		au_sync();
+@@ -1603,6 +1598,7 @@
+ static int au1000_tx(struct sk_buff *skb, struct net_device *dev)
+ {
+ 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
++	struct net_device_stats *ps = &aup->stats;
+ 	volatile tx_dma_t *ptxd;
+ 	u32 buff_stat;
+ 	db_dest_t *pDB;
+@@ -1622,7 +1618,7 @@
+ 		return 1;
+ 	}
+ 	else if (buff_stat & TX_T_DONE) {
+-		update_tx_stats(dev, ptxd->status, ptxd->len & 0x3ff);
++		update_tx_stats(dev, ptxd->status);
+ 		ptxd->len = 0;
+ 	}
+ 
+@@ -1642,6 +1638,9 @@
+ 	else
+ 		ptxd->len = skb->len;
+ 
++	ps->tx_packets++;
++	ps->tx_bytes += ptxd->len;
++
+ 	ptxd->buff_stat = pDB->dma_addr | TX_DMA_ENABLE;
+ 	au_sync();
+ 	dev_kfree_skb(skb);
+@@ -1650,7 +1649,6 @@
+ 	return 0;
+ }
+ 
+-
+ static inline void update_rx_stats(struct net_device *dev, u32 status)
+ {
+ 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
+@@ -1840,21 +1838,36 @@
+ 
+ static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+-	//u16 *data = (u16 *)&rq->ifr_data;
++        struct au1000_private *aup = (struct au1000_private *)dev->priv;
++	struct mii_ioctl_data *mii_data = (struct mii_ioctl_data *)&rq->ifr_ifru;
++	u16 val = mii_data->val_in;
++	const u32 enabled = MAC_EN_RESET0 | MAC_EN_RESET1 | 
++		MAC_EN_RESET2 | MAC_EN_CLOCK_ENABLE;
++
++	/* Check if net device is running */
++        if (!netif_running(dev)) return -EINVAL;
++	
++	/* Check if ethernet mac is in reset mode */
++	if (*aup->enable & enabled != enabled) return -EINVAL; 
+ 
+-	/* fixme */
+ 	switch(cmd) { 
+-		case SIOCDEVPRIVATE:	/* Get the address of the PHY in use. */
+-		//data[0] = PHY_ADDRESS;
+-		case SIOCDEVPRIVATE+1:	/* Read the specified MII register. */
+-		//data[3] = mdio_read(ioaddr, data[0], data[1]); 
+-		return 0;
+-		case SIOCDEVPRIVATE+2:	/* Write the specified MII register */
+-		//mdio_write(ioaddr, data[0], data[1], data[2]);
+-		return 0;
++		case SIOCGMIIPHY:	/* Get the address of the PHY in use. */
++			mii_data->phy_id = aup->phy_addr;
++			break;
++		case SIOCGMIIREG:	/* Read the specified MII register. */
++			mii_data->val_out = mdio_read(dev, mii_data->phy_id, 
++				mii_data->reg_num);
++			break;
++		case SIOCSMIIREG:	/* Write the specified MII register */
++			if (!capable(CAP_NET_ADMIN))
++				return -EPERM;
++			mdio_write(dev,mii_data->phy_id, mii_data->reg_num, 
++				val);
+ 		default:
+ 		return -EOPNOTSUPP;
++
+ 	}
++	return 0;
+ }
+ 
+ 
+--- linux/drivers/net/Config.in	2006-10-13 15:05:33.697966750 +0200
++++ patch/drivers/net/Config.in	2006-10-13 14:36:47.030056750 +0200
+@@ -67,9 +67,7 @@
+    fi
+    if [ "$CONFIG_SOC_AU1X00" = "y" ]; then
+       tristate '  MIPS Au1x00 Ethernet support' CONFIG_MIPS_AU1X00_ENET
+-      if [ "$CONFIG_MIPS_AU1X00_ENET" = "y" ]; then
+-         bool '   Broadcom 5222 Dual Phy Support' CONFIG_BCM5222_DUAL_PHY
+-      fi
++      dep_mbool '   Broadcom 5222 Dual Phy Support' CONFIG_BCM5222_DUAL_PHY $CONFIG_MIPS_AU1X00_ENET
+    fi
+    if [ "$CONFIG_SGI_IP27" = "y" ]; then
+       bool '  SGI IOC3 Ethernet' CONFIG_SGI_IOC3_ETH