rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

2 files changed, 1977 insertions, 0 deletions

diff --git a/recipes/linux/linux-jlime-jornada7xx-2.6.18/defconf_jlime b/recipes/linux/linux-jlime-jornada7xx-2.6.18/defconf_jlime
new file mode 100644
index 0000000000..6ad17ec1b4
--- /dev/null
+++ b/recipes/linux/linux-jlime-jornada7xx-2.6.18/defconf_jlime
@@ -0,0 +1,1068 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.18
+# Tue Oct  3 22:34:12 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_DMABOUNCE=y
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_COLLIE is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+CONFIG_SA1100_JORNADA720=y
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+CONFIG_SA1111=y
+CONFIG_FORCE_MAX_ZONEORDER=9
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_DEBUG=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+# CONFIG_PCMCIA_SA1100 is not set
+CONFIG_PCMCIA_SA1111=y
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=2
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=m
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=m
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+CONFIG_ARLAN=m
+CONFIG_WAVELAN=m
+CONFIG_PCMCIA_WAVELAN=m
+CONFIG_PCMCIA_NETWAVE=m
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+CONFIG_PCMCIA_RAYCS=m
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+CONFIG_ATMEL=m
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+CONFIG_AIRO_CS=m
+CONFIG_PCMCIA_ATMEL=m
+CONFIG_PCMCIA_WL3501=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+CONFIG_SLIP=m
+# CONFIG_SLIP_COMPRESSED is not set
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=240
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_JORNADA720=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_JORNADA720=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_SA1100 is not set
+CONFIG_FB_EPSON1356=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=852
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-2"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
diff --git a/recipes/linux/linux-jlime-jornada7xx-2.6.18/linux-2.6.18-jornada7xx.patch b/recipes/linux/linux-jlime-jornada7xx-2.6.18/linux-2.6.18-jornada7xx.patch
new file mode 100644
index 0000000000..69decb5b9b
--- /dev/null
+++ b/recipes/linux/linux-jlime-jornada7xx-2.6.18/linux-2.6.18-jornada7xx.patch
@@ -0,0 +1,909 @@
+diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/cpu-sa1110.c linux-2.6.18/arch/arm/mach-sa1100/cpu-sa1110.c
+--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/cpu-sa1110.c	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/arch/arm/mach-sa1100/cpu-sa1110.c	2006-10-03 22:58:39.000000000 +0000
+@@ -82,6 +82,14 @@
+ 		.twr		= 9,
+ 		.refresh	= 64000,
+ 		.cas_latency	= 3,
++	}, {    /* Samsung K4s281632b-1h */
++	        .name           = "K4S281632B-1H",
++	        .rows           = 12,
++		.tck            = 10,
++		.trp            = 20,
++		.twr            = 10,
++		.refresh        = 64000,
++		.cas_latency    = 3,
+ 	}, {	/* Samsung KM416S4030CT */
+ 		.name		= "KM416S4030CT",
+ 		.rows		= 13,
+@@ -366,6 +374,9 @@
+ 
+ 		if (machine_is_h3100())
+ 			name = "KM416S4030CT";
++
++	        if (machine_is_jornada720())
++		        name = "K4S281632B-1H";
+ 	}
+ 
+ 	sdram = sa1110_find_sdram(name);
+diff -ruN linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720.c linux-2.6.18/arch/arm/mach-sa1100/jornada720.c
+--- linux-2.6.18-vanilla/arch/arm/mach-sa1100/jornada720.c	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/arch/arm/mach-sa1100/jornada720.c	2006-10-03 22:58:39.000000000 +0000
+@@ -22,11 +22,170 @@
+ #include <asm/mach/map.h>
+ #include <asm/mach/serial_sa1100.h>
+ 
++#include <asm/arch/jornada720.h>
++
++#include <linux/lcd.h>
++#include <linux/backlight.h>
++#include <linux/fb.h>
+ #include "generic.h"
+ 
+ 
+ #define JORTUCR_VAL	0x20000400
+ 
++/* Jornada 720 MCU functions */
++#define MCU_REVERSE(i) ((unsigned char)(((0x80 & i) >> 7) | ((0x40 & i) >> 5) \
++                       | ((0x20 & i) >> 3) | ((0x10 & i) >> 1) | ((0x08 & i) << 1) \
++		       | ((0x04 & i) << 3) | ((0x02 & i) << 5) | ((0x01 & i) << 7)))
++
++void jornada720_init_ser(void)
++{
++      int i;
++
++      GPSR = GPIO_GPIO25;
++      Ser4SSCR0 = 0x0307;
++      Ser4MCCR0 = 0;
++      Ser4SSCR1 = 0x18;
++      Ser4SSCR0 = 0x0387;
++      while (Ser4SSSR & SSSR_RNE)
++             i = Ser4SSDR;
++}
++
++int jornada720_mcu_byte(int arg_data)
++{
++      int i;
++
++      while ((Ser4SSSR & SSSR_TNF) == 0);
++      i = 0;
++      while ((GPLR & 0x400) && i++ < 400000);
++             /* wait for MCU */
++
++      if (i >= 400000) {
++               printk("jornada 720_mcu_byte: timed out\n");
++	       return -1;
++      }
++      Ser4SSDR = MCU_REVERSE(arg_data) << 8;
++      udelay(100);
++      while ((Ser4SSSR & SSSR_RNE) == 0);
++      i = Ser4SSDR;
++      if (i > 0xff)
++            printk("jornada720 mcu_byte: read %x\n", i);
++      return MCU_REVERSE(i & 0xff) & 0xff;
++}
++
++
++int jornada720_mcu_start(int arg_data)
++{
++      int i;
++
++      GPCR = GPIO_GPIO25;  /* clear -> enable */
++      udelay(100);
++      i = jornada720_mcu_byte(arg_data);
++      if (i != MCU_TxDummy)
++      {
++              printk("jornada720_mcu_start: sent %x got %x\n",  arg_data, i);
++	      for (i = 0; i < 256; i++)
++	          if (jornada720_mcu_read() == -1)
++		           break;
++
++	      jornada720_init_ser();
++	      return -1;
++      }
++
++      return 0;
++}
++
++
++void jornada720_mcu_end(void)
++{
++     udelay(100);
++     GPSR = GPIO_GPIO25; /* set */
++}
++
++void jornada720_mcu_init(void)
++{
++
++     /*int i;
++
++     if (state) {
++                 PPSR &= ~PPC_LDD1;
++                 PPDR &= PPC_LDD1;
++     }
++     else { */
++                 PPSR |= PPC_LDD1;
++     /*}
++     return 0;*/
++}
++
++/*static int jornada720_backlight_get_power(struct backlight_device *bd)
++{
++
++     return  ~(PPSR&PPC_LDD1);
++}*/
++
++static int jornada720_backlight_get_brightness(struct  backlight_device *bd)
++{
++     int brightness;
++     jornada720_mcu_start(MCU_GetBrightness);
++     brightness = jornada720_mcu_read();
++     jornada720_mcu_end();
++     return brightness;
++}
++
++static int jornada720_backlight_set_brightness(struct backlight_device *bd)
++{
++	/* TODO: should it be substracted? */
++     int brightness = 255 - bd->props->brightness;
++     jornada720_mcu_start(MCU_SetBrightness);
++     jornada720_mcu_byte(brightness);
++     jornada720_mcu_end();
++     return 0;
++}
++
++static struct backlight_properties jornada720_backlight_properties = {
++       .owner                   =  THIS_MODULE,
++       .get_brightness          =  jornada720_backlight_get_brightness,
++       .update_status           =  jornada720_backlight_set_brightness,
++       .max_brightness          =  255,
++};
++
++static int jornada720_lcd_set_power(struct lcd_device *ld, int power)
++{
++	return 0;
++}
++
++static int jornada720_lcd_get_power(struct lcd_device *ld)
++{
++	return 1;
++}
++
++static int jornada720_lcd_get_contrast(struct lcd_device *ld)
++{
++	int contrast;
++
++	jornada720_mcu_start(MCU_GetContrast);
++	contrast = jornada720_mcu_read();
++	jornada720_mcu_end();
++
++	return contrast;
++}
++
++static int jornada720_lcd_set_contrast(struct lcd_device *ld, int contrast)
++{
++	jornada720_mcu_start(MCU_SetContrast);
++	jornada720_mcu_byte(contrast);
++	jornada720_mcu_end();
++	return 0;
++}
++
++static struct lcd_properties jornada720_lcd_properties = {
++       .owner                   = THIS_MODULE,
++       .set_power               = jornada720_lcd_set_power,
++       .get_power               = jornada720_lcd_get_power,
++       .set_contrast            = jornada720_lcd_set_contrast,
++       .get_contrast            = jornada720_lcd_get_contrast,
++       .max_contrast            = 255,
++};
++
+ static struct resource sa1111_resources[] = {
+ 	[0] = {
+ 		.start		= 0x40000000,
+@@ -77,6 +236,10 @@
+ 		PPDR |= PPC_LDD3 | PPC_LDD4;
+ 
+ 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
++
++                jornada720_mcu_init();
++		backlight_device_register("e1356fb", 0, &jornada720_backlight_properties);
++		lcd_device_register("e1356fb", 0, &jornada720_lcd_properties);
+ 	}
+ 	return ret;
+ }
+diff -ruN linux-2.6.18-vanilla/drivers/input/keyboard/Kconfig linux-2.6.18/drivers/input/keyboard/Kconfig
+--- linux-2.6.18-vanilla/drivers/input/keyboard/Kconfig	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/drivers/input/keyboard/Kconfig	2006-10-03 22:58:39.000000000 +0000
+@@ -183,4 +183,11 @@
+ 	  This driver implements support for HIL-keyboards attached
+ 	  to your machine, so normally you should say Y here.
+ 
++config KEYBOARD_JORNADA720
++        tristate "HP Jornada 720 Keyboard Support"
++	depends on SA1100_JORNADA720
++	default y
++	help
++	  Say Y to enable keyboard on the Hewlett Packard Jornada
++	  7xx(710/720/728) series of PDAs.
+ endif
+diff -ruN linux-2.6.18-vanilla/drivers/input/keyboard/Makefile linux-2.6.18/drivers/input/keyboard/Makefile
+--- linux-2.6.18-vanilla/drivers/input/keyboard/Makefile	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/drivers/input/keyboard/Makefile	2006-10-03 22:58:39.000000000 +0000
+@@ -15,4 +15,4 @@
+ obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
+ obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
+ obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+-
++obj-$(CONFIG_KEYBOARD_JORNADA720)       += jornada720_kbd.o
+diff -ruN linux-2.6.18-vanilla/drivers/input/keyboard/jornada720_kbd.c linux-2.6.18/drivers/input/keyboard/jornada720_kbd.c
+--- linux-2.6.18-vanilla/drivers/input/keyboard/jornada720_kbd.c	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.18/drivers/input/keyboard/jornada720_kbd.c	2006-10-03 23:05:54.000000000 +0000
+@@ -0,0 +1,102 @@
++/*
++ * Jornada 720 keyboard interface
++ */
++
++#include <linux/input.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/jornada720.h>
++#include <asm/irq.h>
++
++MODULE_AUTHOR("Alex Lange <chicken@handhelds.org>");
++MODULE_DESCRIPTION("Jornada 720 keyboard driver");
++MODULE_LICENSE("GPL");
++
++static char jornada720_kbd_name[] = "Jornada 720 keyboard";
++
++static struct input_dev *dev;
++
++static unsigned char jornada720_normal_keymap[128] = {
++	0, 1, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 87, KEY_VOLUMEUP, KEY_VOLUMEDOWN, KEY_MUTE,
++	0, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 0, 0, 0,
++	0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 43, 14, 0, 0, 0,
++	0, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, KEY_LEFTBRACE, KEY_RIGHTBRACE, 0, 0, 0,
++	0, 44, 45, 46, 47, 48, 49, 50, 51, 52, KEY_KPMINUS, 40, 28, 0, 0, 0,
++	0, 15, 0, 42, 0, 40, 0, 0, 0, 0, 103, 0, 54, 0, 0, 0,
++	0, 0, 0, 0, 0, 56, KEY_GRAVE, 0, 0, 105, 108, 106, 0, 0, 0, 0,
++	0, 55, 29, 0, 57, 0, 0, 0, 53, 111, 0, 0, 0, 0, 0, 116,
++};
++
++static irqreturn_t jornada720_keyboard_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++	int key, keycode;
++	int count, mcu_data=0;
++
++	jornada720_mcu_start(MCU_GetScanKeyCode);
++	count = jornada720_mcu_read();
++
++	while (count-- > 0) {
++		key = mcu_data = jornada720_mcu_read();
++
++		if (key > 128)
++			key = key - 128;
++
++		keycode = jornada720_normal_keymap[key];
++
++		if (mcu_data < 128) {
++			input_report_key(dev, keycode, 1);
++			input_sync(dev);
++		}
++		else {
++			input_report_key(dev, keycode, 0);
++			input_sync(dev);
++		}
++	}
++
++	jornada720_mcu_end();
++
++	return IRQ_HANDLED;
++}
++
++static int __init jornada720_kbd_init(void)
++{
++	int i,ret;
++	printk("jorada720_kbd: Jornada 720 keyboard\n");
++
++	/*init_input_dev(&dev);*/
++	dev = input_allocate_device();
++	dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
++	dev->keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND);
++
++	for ( i=0 ; i<=128 ; i++ ) {
++		if (!(jornada720_normal_keymap[i])) {
++		}
++		else
++			set_bit(jornada720_normal_keymap[i], dev->keybit);
++	}
++
++	dev->name = jornada720_kbd_name;
++
++	ret = request_irq(GPIO_JORNADA720_KEYBOARD_IRQ,
++	                  jornada720_keyboard_interrupt,
++			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
++			  "Jornada720 Keyboard",NULL);
++	if (ret) {
++	        printk("Unable to grab Jornada 720 keyboard IRQ: %d\n", ret);
++		input_free_device(dev);
++		return ret;
++	}
++
++	input_register_device(dev);
++
++	return 0;
++}
++
++module_init(jornada720_kbd_init);
+diff -ruN linux-2.6.18-vanilla/drivers/input/touchscreen/Kconfig linux-2.6.18/drivers/input/touchscreen/Kconfig
+--- linux-2.6.18-vanilla/drivers/input/touchscreen/Kconfig	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/drivers/input/touchscreen/Kconfig	2006-10-03 22:58:39.000000000 +0000
+@@ -108,4 +108,11 @@
+ 	  To compile this driver as a module, choose M here: the
+ 	  module will be called hp680_ts_input.
+ 
++config TOUCHSCREEN_JORNADA720
++        tristate "HP Jornada 720 touchscreen support"
++	depends on SA1100_JORNADA720
++	help
++	  Say Y here if you are using a HP Jornada 710/720/728 handheld
++	  and want to use the touchscreen.
++
+ endif
+diff -ruN linux-2.6.18-vanilla/drivers/input/touchscreen/Makefile linux-2.6.18/drivers/input/touchscreen/Makefile
+--- linux-2.6.18-vanilla/drivers/input/touchscreen/Makefile	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/drivers/input/touchscreen/Makefile	2006-10-03 22:58:39.000000000 +0000
+@@ -12,3 +12,4 @@
+ obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
+ obj-$(CONFIG_TOUCHSCREEN_MK712)	+= mk712.o
+ obj-$(CONFIG_TOUCHSCREEN_HP600)	+= hp680_ts_input.o
++obj-$(CONFIG_TOUCHSCREEN_JORNADA720) += jornada720_ts.o
+diff -ruN linux-2.6.18-vanilla/drivers/input/touchscreen/jornada720_ts.c linux-2.6.18/drivers/input/touchscreen/jornada720_ts.c
+--- linux-2.6.18-vanilla/drivers/input/touchscreen/jornada720_ts.c	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.18/drivers/input/touchscreen/jornada720_ts.c	2006-10-03 23:07:32.000000000 +0000
+@@ -0,0 +1,108 @@
++/*
++ * Jornada 720 touchscreen interface based on Jornada 56x interface
++ */
++
++#include <linux/input.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/delay.h>
++#include <linux/slab.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/jornada720.h>
++#include <asm/irq.h>
++
++MODULE_AUTHOR("Alex Lange <chicken@handhelds.org>");
++MODULE_DESCRIPTION("Jornada 720 touchscreen driver");
++MODULE_LICENSE("GPL");
++
++static char jornada720_ts_name[] = "Jornada 720 touchscreen";
++
++static struct input_dev *dev;
++
++static irqreturn_t jornada720_mouse_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++{
++	int down;
++	int X[3], Y[3], high_x, high_y, x, y;
++
++	udelay(1);
++
++	down = ( (GPLR & GPIO_JORNADA720_MOUSE) == 0);
++
++	if(!down) {
++		input_report_key(dev, BTN_TOUCH, down); /* report a pen up */
++		input_report_abs(dev, ABS_PRESSURE, 0);
++		input_sync(dev);
++		return IRQ_HANDLED;
++	}
++
++	/* read x & y data from mcu interface and pass it on */
++
++	jornada720_mcu_start(MCU_GetTouchSamples);
++	X[0] = jornada720_mcu_read();
++	X[1] = jornada720_mcu_read();
++	X[2] = jornada720_mcu_read();
++	Y[0] = jornada720_mcu_read();
++	Y[1] = jornada720_mcu_read();
++	Y[2] = jornada720_mcu_read();
++	high_x = jornada720_mcu_read(); /* msbs of samples */
++	high_y = jornada720_mcu_read();
++	jornada720_mcu_end();
++
++	X[0] |= (high_x & 3) << 8;
++	X[1] |= (high_x & 0xc) << 6;
++	X[2] |= (high_x & 0x30) << 4;
++
++	Y[0] |= (high_y & 3) << 8;
++	Y[1] |= (high_y & 0xc) << 6;
++	Y[2] |= (high_y & 0x30) << 4;
++
++        /* simple averaging filter */
++	x = (X[0] + X[1] + X[2])/3;
++	y = (Y[0] + Y[1] + Y[2])/3;
++
++	input_report_key(dev, BTN_TOUCH, down);
++	input_report_abs(dev, ABS_X, x);
++	input_report_abs(dev, ABS_Y, y);
++	input_report_abs(dev, ABS_PRESSURE, 1);
++	input_sync(dev);
++
++	return IRQ_HANDLED;
++
++}
++
++static int __init jornada720_ts_init(void)
++{
++	int ret;
++        printk("jornada720_ts: Jornada 720 touchscreen\n");
++
++	dev = input_allocate_device();
++	dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
++	dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
++	dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
++
++	dev->absmin[ABS_X] = 270; dev->absmin[ABS_Y] = 180;
++	dev->absmax[ABS_X] = 3900;  dev->absmax[ABS_Y] = 3700;
++
++	dev->name = jornada720_ts_name;
++
++	ret = request_irq(GPIO_JORNADA720_MOUSE_IRQ,
++	                  jornada720_mouse_interrupt,
++			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
++			  "Jornada720 Mouse",NULL);
++	if (ret) {
++	        printk("Unable to grab Jornada 720 Mouse/Touchscreen IRQ: %d\n", ret);
++                input_free_device(dev);
++		return ret;
++	}
++
++	input_register_device(dev);
++
++	return 0;
++}
++
++module_init(jornada720_ts_init);
++
+diff -ruN linux-2.6.18-vanilla/drivers/video/Kconfig linux-2.6.18/drivers/video/Kconfig
+--- linux-2.6.18-vanilla/drivers/video/Kconfig	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/drivers/video/Kconfig	2006-10-03 22:58:39.000000000 +0000
+@@ -680,6 +680,16 @@
+ 	  framebuffer.  Product specs at
+ 	  <http://www.erd.epson.com/vdc/html/products.htm>.
+ 
++config FB_EPSON1356
++        bool "Epson 1356 framebuffer support"
++	depends on FB && ARM && SA1100_JORNADA720
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	Support for the 1356 framebuffer device on the HP Jornada
++	710/720/728 hanheld pc.
++
+ config FB_S1D13XXX
+ 	tristate "Epson S1D13XXX framebuffer support"
+ 	depends on FB
+diff -ruN linux-2.6.18-vanilla/drivers/video/Makefile linux-2.6.18/drivers/video/Makefile
+--- linux-2.6.18-vanilla/drivers/video/Makefile	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/drivers/video/Makefile	2006-10-03 22:58:39.000000000 +0000
+@@ -77,6 +77,7 @@
+ obj-$(CONFIG_FB_SUN3)             += sun3fb.o
+ obj-$(CONFIG_FB_HIT)              += hitfb.o
+ obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
++obj-$(CONFIG_FB_EPSON1356)        += epson1356fb.o
+ obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
+ obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+ obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+diff -ruN linux-2.6.18-vanilla/drivers/video/epson1356fb.c linux-2.6.18/drivers/video/epson1356fb.c
+--- linux-2.6.18-vanilla/drivers/video/epson1356fb.c	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.18/drivers/video/epson1356fb.c	2006-10-03 22:58:39.000000000 +0000
+@@ -0,0 +1,345 @@
++/*
++ * linux/drivers/video/epson1356fb.c -- Epson 1356 LCD Controller Frame Buffer Device
++ *
++ *  Copyright (C) 2001 MIT
++ *
++ * Edited from sa1100fb.c
++ *  Copyright (C) 1999 Eric A. Thomas
++ *   Based on acornfb.c Copyright (C) Russell King.
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file COPYING in the main directory of this archive
++ * for more details.
++ *
++ * 20050203: Ported to kernel 2.6. Very basic interface for the Jornada 720 (C) Alex Lange (chicken@handhelds.org)
++ *
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/interrupt.h>
++#include <linux/slab.h>
++#include <linux/fb.h>
++#include <linux/delay.h>
++#include <linux/init.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++
++#include <asm/uaccess.h>
++#include <asm/hardware.h>
++
++#include <asm/arch/jornada720.h>
++
++#include "console/fbcon.h"
++
++u32 pseudo_pal[16];
++
++struct fb_info fb_info;
++
++static int e1356fb_setcolreg(unsigned regno, unsigned red, unsigned green,
++			      unsigned blue, unsigned transp,
++			      struct fb_info *fb_info)
++{
++	int bpp, m = 0;
++
++	bpp = fb_info->var.bits_per_pixel;
++	m = (bpp <= 8) ? (1 << bpp) : 256;
++	if (regno >= m) {
++		printk("regno %d out of range (max %d)\n", regno, m);
++		return -EINVAL;
++	}
++	switch (bpp) {
++	case 8:
++		break;
++	case 16:
++		/* RGB 565 */
++		pseudo_pal[regno] = ((red & 0xF800) |
++					   ((green & 0xFC00) >> 5) |
++					   ((blue & 0xF800) >> 11));
++		break;
++	}
++
++	return 0;
++}
++
++static int e1356fb_blank(int blank, struct fb_info *info)
++{
++	switch (blank) {
++		case FB_BLANK_POWERDOWN:
++		case FB_BLANK_VSYNC_SUSPEND:
++		case FB_BLANK_HSYNC_SUSPEND:
++		case FB_BLANK_NORMAL:
++			PPSR &= ~PPC_LDD1;
++			PPDR |= PPC_LDD1;
++			break;
++
++		case FB_BLANK_UNBLANK:
++			PPSR |= PPC_LDD1;
++			mdelay(100);
++		}
++	return 0;
++}
++
++static struct fb_var_screeninfo e1356fb_screeninfo = {
++	.xres 		= 640,
++	.yres 		= 240,
++	.xres_virtual 	= 640,
++	.yres_virtual 	= 240,
++	.bits_per_pixel = 16,
++	.red.length	= 5,
++	.green.length	= 6,
++	.blue.length	= 5,
++	.transp.length	= 0,
++	.red.offset	= 11,
++	.green.offset	= 5,
++	.blue.offset	= 0,
++	.transp.offset	= 0,
++	.activate 	= FB_ACTIVATE_NOW,
++	.height 	= -1,
++	.width 		= -1,
++	.vmode 		= FB_VMODE_NONINTERLACED,
++	.accel_flags	= 0,
++	.nonstd		= 0,
++};
++
++static struct fb_ops e1356fb_ops = {
++	.owner		= THIS_MODULE,
++	.fb_setcolreg	= e1356fb_setcolreg,
++	.fb_fillrect	= cfb_fillrect,
++	.fb_copyarea	= cfb_copyarea,
++	.fb_imageblit	= cfb_imageblit,
++	.fb_cursor	= soft_cursor,
++	.fb_blank	= e1356fb_blank,
++};
++
++static struct fb_fix_screeninfo e1356fb_fix = {
++	.id 		= "e1356fb",
++	.smem_len 	= (MAX_XRES * MAX_YRES * MAX_BPP)/8,
++	.smem_start	= (unsigned long)DISP_MEM_OFFSET_PHYS,
++	.type 		= FB_TYPE_PACKED_PIXELS,
++	.visual 	= FB_VISUAL_TRUECOLOR,
++	.line_length 	= (640 * 16) / 8,
++	.accel		= FB_ACCEL_NONE,
++	.type_aux	= 0,
++	.ypanstep	= 0,
++	.ywrapstep	= 0,
++};
++
++unsigned char LUT8[256*3] = {
++	/* Primary and secondary colors */
++	0x00, 0x00, 0x00,  0x00, 0x00, 0xA0,  0x00, 0xA0, 0x00,  0x00, 0xA0, 0xA0,
++	0xA0, 0x00, 0x00,  0xA0, 0x00, 0xA0,  0xA0, 0xA0, 0x00,  0xA0, 0xA0, 0xA0,
++	0x50, 0x50, 0x50,  0x00, 0x00, 0xF0,  0x00, 0xF0, 0x00,  0x00, 0xF0, 0xF0,
++	0xF0, 0x00, 0x00,  0xF0, 0x00, 0xF0,  0xF0, 0xF0, 0x00,  0xF0, 0xF0, 0xF0
++};
++
++static char lut_base[] = {
++	/*red    green  blue   rinc   ginc   binc  */
++	  0x00,  0x00,  0x00,  0x10,  0x10,  0x10, /* Gray shades */
++	  0x00,  0x00,  0x00,  0x10,  0x00,  0x00, /* Black to red */
++	  0x00,  0x00,  0x00,  0x00,  0x10,  0x00, /* Black to green */
++	  0x00,  0x00,  0x00,  0x00,  0x00,  0x10, /* Black to blue */
++	  0x00,  0x00,  0xF0,  0x00,  0x10,  0x00, /* Blue to cyan (blue and green) */
++	  0x00,  0xf0,  0xf0,  0x00,  0x00, -0x10, /* Cyan (blue and green) to green */
++	  0x00,  0xf0,  0x00,  0x10,  0x00,  0x00, /* Green to yellow (red and green)*/
++	  0xf0,  0xf0,  0x00,  0x00, -0x10,  0x00, /* Yellow (red and green) to red */
++	  0xf0,  0x00,  0x00,  0x00,  0x00,  0x10, /* Red to magenta (blue and red) */
++	  0xf0,  0x00,  0xf0, -0x10,  0x00,  0x00, /* Magenta (blue and red) to blue */
++	  0x00,  0x00,  0x00,  0x10,  0x00,  0x10, /* Black to magenta (blue and red)*/
++	  0x00,  0x00,  0x00,  0x00,  0x10,  0x10, /* Black to cyan (blue and green) */
++	  0xf0,  0x00,  0x00,  0x00,  0x10,  0x10, /* Red to white */
++	  0x00,  0xf0,  0x00,  0x10,  0x00,  0x10, /* Green to white */
++	  0x00,  0x00,  0xf0,  0x10,  0x10,  0x00, /* Blue to white */
++};
++
++void e1356fb_init_hardware(void)
++{
++	unsigned char *pRegs = REGISTER_OFFSET;
++	unsigned char *pLUT = LUT8;
++	unsigned char *pseed = lut_base;
++	unsigned char plast[3];
++	int i, j, rgb;
++
++	/* Enable access to SED1356 by setting memory/register select bit to 0. */
++	pRegs[0x001] = 0;
++	udelay(2);
++	/* Disable display outputs during initialization) */
++	pRegs[0x1FC] = 0;
++
++	/* Set the GPIOs to input. Should GPIO bits in register [004] get switched
++	   then the GPIO outputs, according to register [008], are driven low. */
++	pRegs[0x004] = 0;
++	pRegs[0x008] = 0;
++
++	/* Program the LCD panel type and panel timing registers.
++	 *	The horizontal and vertical non-display times have been
++	 *	calculated for a 78 Hz frame rate.
++	 *                                                LCD PCLK
++	 *                          FrameRate = -----------------------------
++	 *                                      (HDP + HNDP) * (VDP/2 + VNDP)
++	 *
++	 *           20,000,000
++	 * = ---------------------------- = 78 Hz
++	 *   (640 + 256) * (480 / 2 + 45)
++	 */
++
++	pRegs[0x10] = 0x1;	/* Memory Clock Configuration Register */
++	pRegs[0x14] = 0x11;	/* LCD Pixel Clock Configuration Register */
++	pRegs[0x18] = 0x1;	/* CRT/TV Pixel Clock Configuration Register */
++	pRegs[0x1c] = 0x1;	/* MediaPlug Clock Configuration Register */
++	pRegs[0x1e] = 0x1;	/* CPU To Memory Wait State Select Register */
++	pRegs[0x20] = 0;	/* Memory Configuration Register */
++	pRegs[0x21] = 0x45;	/* DRAM Refresh Rate Register */
++	pRegs[0x2a] = 0x1;	/* DRAM Timings Control Register 0 */
++	pRegs[0x2b] = 0x1;	/* DRAM Timings Control Register 1 */
++	pRegs[0x30] = 0x1c;	/* Panel Type Register */
++	pRegs[0x31] = 0;	/* MOD Rate Register */
++	pRegs[0x32] = 0x4f;	/* LCD Horizontal Display Width Register */
++	pRegs[0x34] = 0x7;	/* LCD Horizontal Non-Display Period Register */
++	pRegs[0x35] = 0x1;	/* TFT FPLINE Start Position Register */
++	pRegs[0x36] = 0xb;	/* TFT FPLINE Pulse Width Register */
++	pRegs[0x38] = 0xef;	/* LCD Vertical Display Height Register 0 */
++	pRegs[0x39] = 0;	/* LCD Vertical Display Height Register 1 */
++	pRegs[0x3a] = 0x13;	/* LCD Vertical Non-Display Period Register */
++	pRegs[0x3b] = 0xb;	/* TFT FPFRAME Start Position Register */
++	pRegs[0x3c] = 0x1;	/* TFT FPFRAME Pulse Width Register */
++	pRegs[0x40] = 0x5;	/* LCD Display Mode Register */
++	pRegs[0x41] = 0;	/* LCD Miscellaneous Register */
++	pRegs[0x42] = 0;	/* LCD Display Start Address Register 0 */
++	pRegs[0x43] = 0;	/* LCD Display Start Address Register 1 */
++	pRegs[0x44] = 0;	/* LCD Display Start Address Register 2 */
++	pRegs[0x46] = 0x80;	/* LCD Memory Address Offset Register 0 */
++	pRegs[0x47] = 0x2;	/* LCD Memory Address Offset Register 1 */
++	pRegs[0x48] = 0;	/* LCD Pixel Panning Register */
++	pRegs[0x4a] = 0;	/* LCD Display FIFO High Threshold Control Register */
++	pRegs[0x4b] = 0;	/* LCD Display FIFO Low Threshold Control Register */
++	pRegs[0x50] = 0x4f;	/* CRT/TV Horizontal Display Width Register */
++	pRegs[0x52] = 0x13;	/* CRT/TV Horizontal Non-Display Period Register */
++	pRegs[0x53] = 0x1;	/* CRT/TV HRTC Start Position Register */
++	pRegs[0x54] = 0xb;	/* CRT/TV HRTC Pulse Width Register */
++	pRegs[0x56] = 0xdf;	/* CRT/TV Vertical Display Height Register 0 */
++	pRegs[0x57] = 0x1;	/* CRT/TV Vertical Display Height Register 1 */
++	pRegs[0x58] = 0x2b;	/* CRT/TV Vertical Non-Display Period Register */
++	pRegs[0x59] = 0x9;	/* CRT/TV VRTC Start Position Register */
++	pRegs[0x5a] = 0x1;	/* CRT/TV VRTC Pulse Width Register */
++	pRegs[0x5b] = 0x10;	/* TV Output Control Register */
++	pRegs[0x60] = 0x3;	/* CRT/TV Display Mode Register */
++	pRegs[0x62] = 0;	/* CRT/TV Display Start Address Register 0 */
++	pRegs[0x63] = 0;	/* CRT/TV Display Start Address Register 1 */
++	pRegs[0x64] = 0;	/* CRT/TV Display Start Address Register 2 */
++	pRegs[0x66] = 0x40;	/* CRT/TV Memory Address Offset Register 0 */
++	pRegs[0x67] = 0x1;	/* CRT/TV Memory Address Offset Register 1 */
++	pRegs[0x68] = 0;	/* CRT/TV Pixel Panning Register */
++	pRegs[0x6a] = 0;	/* CRT/TV Display FIFO High Threshold Control Register */
++	pRegs[0x6b] = 0;	/* CRT/TV Display FIFO Low Threshold Control Register */
++	pRegs[0x70] = 0;	/* LCD Ink/Cursor Control Register */
++	pRegs[0x71] = 0x1;	/* LCD Ink/Cursor Start Address Register */
++	pRegs[0x72] = 0;	/* LCD Cursor X Position Register 0 */
++	pRegs[0x73] = 0;	/* LCD Cursor X Position Register 1 */
++	pRegs[0x74] = 0;	/* LCD Cursor Y Position Register 0 */
++	pRegs[0x75] = 0;	/* LCD Cursor Y Position Register 1 */
++	pRegs[0x76] = 0;	/* LCD Ink/Cursor Blue Color 0 Register */
++	pRegs[0x77] = 0;	/* LCD Ink/Cursor Green Color 0 Register */
++	pRegs[0x78] = 0;	/* LCD Ink/Cursor Red Color 0 Register */
++	pRegs[0x7a] = 0x1f;	/* LCD Ink/Cursor Blue Color 1 Register */
++	pRegs[0x7b] = 0x3f;	/* LCD Ink/Cursor Green Color 1 Register */
++	pRegs[0x7c] = 0x1f;	/* LCD Ink/Cursor Red Color 1 Register */
++	pRegs[0x7e] = 0;	/* LCD Ink/Cursor FIFO Threshold Register */
++	pRegs[0x80] = 0;	/* CRT/TV Ink/Cursor Control Register */
++	pRegs[0x81] = 0x1;	/* CRT/TV Ink/Cursor Start Address Register */
++	pRegs[0x82] = 0;	/* CRT/TV Cursor X Position Register 0 */
++	pRegs[0x83] = 0;	/* CRT/TV Cursor X Position Register 1 */
++	pRegs[0x84] = 0;	/* CRT/TV Cursor Y Position Register 0 */
++	pRegs[0x85] = 0;	/* CRT/TV Cursor Y Position Register 1 */
++	pRegs[0x86] = 0;	/* CRT/TV Ink/Cursor Blue Color 0 Register */
++	pRegs[0x87] = 0;	/* CRT/TV Ink/Cursor Green Color 0 Register */
++	pRegs[0x88] = 0;	/* CRT/TV Ink/Cursor Red Color 0 Register */
++	pRegs[0x8a] = 0x1f;	/* CRT/TV Ink/Cursor Blue Color 1 Register */
++	pRegs[0x8b] = 0x3f;	/* CRT/TV Ink/Cursor Green Color 1 Register */
++	pRegs[0x8c] = 0x1f;	/* CRT/TV Ink/Cursor Red Color 1 Register */
++	pRegs[0x8e] = 0;	/* CRT/TV Ink/Cursor FIFO Threshold Register */
++
++	/* Set the 2D acceleration (BitBLT) registers to a known state */
++	for (i = 0x100; i <= 0x119; i++)
++		if (i != 0x107 && i != 0x10b && i != 0x10e && i != 0x10f && i != 0x117)
++			pRegs[i] = 0x00;
++
++	/* Program the look-up table to a known state.  */
++	pRegs[0x1E0] = 0x01;	/* Enable the LCD LUT for read/write. */
++	pRegs[0x1E2] = 0;	/* Reset the LUT address. */
++	for (i = 0; i < 16 * 3; i++)
++		pRegs[0x1E4] = *pLUT++;	/* non-regular color template */
++
++	for (i = 0; i < 15; i++) {
++		for (rgb = 0; rgb < 3; rgb++) {
++			plast[rgb] = *pseed++;		/* base color value */
++			pRegs[0x1E4] = plast[rgb];
++		}
++		for (j = 0; j < 15; j++)
++			for (rgb = 0; rgb < 3; rgb++) {
++				plast[rgb] += pseed[rgb];	/* increment through color values*/
++				pRegs[0x1E4] = plast[rgb];
++			}
++		pseed += 3;
++	}
++
++	pRegs[0x1e4] = 0;	/* Look-Up Table Data Register */
++	pRegs[0x1f0] = 0;	/* Power Save Configuration Register */
++	pRegs[0x1f1] = 0;	/* Power Save Status Register */
++	pRegs[0x1f4] = 0;	/* CPU-to-Memory Access Watchdog Timer Register */
++
++	PPSR |= PPC_LDD0;
++
++	mdelay(100);		/* Wait for 100ms */
++	pRegs[0x1F0] = 0;	/* Turn off power save mode */
++	pRegs[0x1F4] = 0;	/* Disable the watchdog timer */
++	pRegs[0x1FC] = 0x01;	/* Disable power save mode, enable display */
++}
++
++int __init e1356fb_init(void)
++{
++	if (fb_get_options("e1356fb", NULL))
++		return -ENODEV;
++
++	printk("Configuring the Jornada 720 screen...\n");
++
++	fb_info.screen_base = (u_char *) DISP_MEM_OFFSET;
++	fb_info.screen_size = ALLOCATED_FB_MEM_SIZE;
++	memset(&fb_info.var, 0, sizeof(fb_info.var));
++
++	PPSR &= ~(PPC_LDD0 | PPC_LDD1 | PPC_LDD2);
++	PPDR |= PPC_LDD0 | PPC_LDD1 | PPC_LDD2;
++	LCCR3 = 0;
++	LCCR2 = 0;
++	LCCR1 = 0;
++	LCCR0 = 0;
++	DBAR1 = 0;
++	DBAR2 = 0;
++
++	e1356fb_init_hardware();
++	memset ((unsigned char *)DISP_MEM_OFFSET, 0, ALLOCATED_FB_MEM_SIZE);
++
++	PPSR |= PPC_LDD1;
++	mdelay(100);	/* delay again */
++	PPSR |= PPC_LDD2;
++
++	fb_info.fbops		= &e1356fb_ops;
++	fb_info.var		= e1356fb_screeninfo;
++	fb_info.fix		= e1356fb_fix;
++	fb_info.flags		= FBINFO_DEFAULT;
++
++	fb_info.pseudo_palette	= &pseudo_pal;
++
++	if (register_framebuffer(&fb_info) < 0)
++		return 1;
++
++	return 0;
++}
++
++module_init(e1356fb_init);
++
+diff -ruN linux-2.6.18-vanilla/include/asm-arm/arch-sa1100/jornada720.h linux-2.6.18/include/asm-arm/arch-sa1100/jornada720.h
+--- linux-2.6.18-vanilla/include/asm-arm/arch-sa1100/jornada720.h	2006-09-20 03:42:06.000000000 +0000
++++ linux-2.6.18/include/asm-arm/arch-sa1100/jornada720.h	2006-10-03 22:58:39.000000000 +0000
+@@ -11,6 +11,8 @@
+ #error "include <asm/hardware.h> instead"
+ #endif
+ 
++#define jornada720_mcu_read() jornada720_mcu_byte(MCU_TxDummy)
++
+ #define SA1111_BASE             (0x40000000)
+ 
+ #define GPIO_JORNADA720_KEYBOARD	GPIO_GPIO(0)
+@@ -19,9 +21,38 @@
+ #define GPIO_JORNADA720_KEYBOARD_IRQ	IRQ_GPIO0
+ #define GPIO_JORNADA720_MOUSE_IRQ		IRQ_GPIO9
+ 
++/* Epson 1356 LCD controll parameters */
++#define REGISTER_OFFSET ((unsigned char *) 0xf0000000/* 0 */)
++#define DISP_MEM_OFFSET ((unsigned char *) 0xf1000000/* 0 */)
++#define DISP_MEM_OFFSET_PHYS ((unsigned char *) 0x48200000/* 0 filip wtf? */)
++#define ALLOCATED_FB_MEM_SIZE 0x80000 /* display memory size (512kb) */
++
++#define MAX_BPP              16
++#define MAX_XRES            640
++#define MAX_YRES            240
++#define MIN_XRES             64
++#define MIN_YRES             64
++
++/* MCU COMMANDS */
++#define MCU_GetBatteryData  0xc0
++#define MCU_GetScanKeyCode  0x90
++#define MCU_GetTouchSamples 0xa0
++#define MCU_GetContrast     0xD0
++#define MCU_SetContrast     0xD1
++#define MCU_GetBrightness   0xD2
++#define MCU_SetBrightness   0xD3
++#define MCU_ContrastOff     0xD8
++#define MCU_BrightnessOff   0xD9
++#define MCU_PWMOFF          0xDF
++#define MCU_TxDummy         0x11
++#define MCU_ErrorCode       0x00
++
+ #ifndef __ASSEMBLY__
+ 
+ void jornada720_mcu_init(void);
++int  jornada720_mcu_byte(int arg_data);
++int  jornada720_mcu_start(int arg_data);
++void jornada720_mcu_end(void);
+ void jornada_contrast(int arg_contrast);
+ void jornada720_battery(void);
+ int jornada720_getkey(unsigned char *data, int size);