rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

2 files changed, 2559 insertions, 0 deletions

diff --git a/recipes/linux/linux-h6300-omap1-2.6.12-rc5/defconfig b/recipes/linux/linux-h6300-omap1-2.6.12-rc5/defconfig
new file mode 100644
index 0000000000..b1c4458d48
--- /dev/null
+++ b/recipes/linux/linux-h6300-omap1-2.6.12-rc5/defconfig
@@ -0,0 +1,1504 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.12-rc5-omap1-h6300
+# Tue Aug 23 23:07:32 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_IOMAP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP1510=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+CONFIG_MACH_H6300=y
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_NETSTAR is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+CONFIG_OMAP_ARM_150MHZ=y
+CONFIG_OMAP_ARM_120MHZ=y
+CONFIG_OMAP_ARM_60MHZ=y
+CONFIG_OMAP_ARM_30MHZ=y
+CONFIG_OMAP_DSP=y
+CONFIG_OMAP_DSP_MBCMD_VERBOSE=y
+CONFIG_OMAP_DSP_TASK_MULTIOPEN=y
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+
+#
+# PC-card bridges
+#
+CONFIG_TCIC=m
+CONFIG_PCCARD_NONSTATIC=m
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_DISCONTIGMEM is not set
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 root=/dev/nfs nfsroot=192.168.2.1:/opt/h6300/rootfs,rsize=8192,wsize=8192 ip=192.168.2.2:192.168.2.1:192.168.2.1:255.0.0.0:ipaq:"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_AMDSTD_RETRY=1
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PCMCIA is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLKMTD=m
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_DOC2000=m
+CONFIG_MTD_DOC2001=m
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+CONFIG_MTD_DOCPROBE_ADVANCED=y
+CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
+CONFIG_MTD_DOCPROBE_HIGH=y
+CONFIG_MTD_DOCPROBE_55AA=y
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_TOTO is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0x0
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH is not set
+CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_TUNNEL=m
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_TFTP=m
+# CONFIG_IP_NF_AMANDA is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+# CONFIG_IP_NF_MATCH_MARK is not set
+# CONFIG_IP_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+# CONFIG_IP_NF_MATCH_LENGTH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_TCPMSS is not set
+# CONFIG_IP_NF_MATCH_HELPER is not set
+# CONFIG_IP_NF_MATCH_STATE is not set
+# CONFIG_IP_NF_MATCH_CONNTRACK is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+# CONFIG_IP_NF_MATCH_PHYSDEV is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_CONNMARK is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+# CONFIG_IP_NF_NAT is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_TOS is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_DSCP is not set
+# CONFIG_IP_NF_TARGET_MARK is not set
+# CONFIG_IP_NF_TARGET_CLASSIFY is not set
+# CONFIG_IP_NF_TARGET_CONNMARK is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_PHYSDEV is not set
+CONFIG_IP6_NF_FILTER=m
+# CONFIG_IP6_NF_TARGET_LOG is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_ULOG is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_NSC_FIR is not set
+# CONFIG_WINBOND_FIR is not set
+CONFIG_OMAP1610_IR=m
+CONFIG_SMC_IRCC_FIR=m
+# CONFIG_ALI_FIR is not set
+# CONFIG_VIA_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+# CONFIG_BT_RFCOMM_TTY is not set
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_BCSP_TXCRC is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+CONFIG_STRIP=y
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+# CONFIG_HERMES is not set
+CONFIG_ATMEL=y
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_SYNC_TTY=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPPOE=y
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_OMAP=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_OMAP=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_NVRAM=y
+# CONFIG_RTC is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCF=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_ISA=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_STUB is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_OMAP=y
+
+#
+# Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+
+#
+# Other I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_INTERNAL_LCDC=y
+# CONFIG_FB_OMAP_EXTERNAL_LCDC is not set
+CONFIG_FB_OMAP_DMA_TUNE=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=m
+CONFIG_SOUND_OMAP=m
+# CONFIG_SOUND_OMAP_TSC2101 is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+
+#
+# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
+#
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_ACM=y
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_PWC is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+
+#
+# USB Host-to-Host Cables
+#
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+# CONFIG_USB_GENESYS is not set
+CONFIG_USB_NET1080=y
+# CONFIG_USB_PL2301 is not set
+# CONFIG_USB_KC2190 is not set
+
+#
+# Intelligent USB Devices/Gadgets
+#
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_ZAURUS is not set
+CONFIG_USB_CDCETHER=y
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_AX8817X=y
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+CONFIG_USB_SERIAL_VISOR=y
+CONFIG_USB_SERIAL_IPAQ=y
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB ATM/DSL drivers
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BROKEN_RFD=y
+CONFIG_MMC_BULKTRANSFER=y
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_WBSD is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+CONFIG_OMAP_UWIRE=y
+CONFIG_OMAP_TSC2101=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+#CONFIG_DEVFS_FS=y
+#CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS_XATTR=y
+CONFIG_DEVPTS_FS_SECURITY=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_XATTR=y
+CONFIG_TMPFS_SECURITY=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=4
+# CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=m
+CONFIG_REED_SOLOMON_DEC16=y
diff --git a/recipes/linux/linux-h6300-omap1-2.6.12-rc5/h6300_omap1_2612rc5.patch b/recipes/linux/linux-h6300-omap1-2.6.12-rc5/h6300_omap1_2612rc5.patch
new file mode 100644
index 0000000000..7e2f452850
--- /dev/null
+++ b/recipes/linux/linux-h6300-omap1-2.6.12-rc5/h6300_omap1_2612rc5.patch
@@ -0,0 +1,1055 @@
+diff -Naur linux-2.6.12-rc5_omap1/arch/arm/mach-omap/clock.c linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/clock.c
+--- linux-2.6.12-rc5_omap1/arch/arm/mach-omap/clock.c	2005-08-23 22:36:30.426733413 +0300
++++ linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/clock.c	2005-08-23 22:38:07.446289831 +0300
+@@ -21,6 +21,7 @@
+ #include <asm/arch/usb.h>
+ 
+ #include "clock.h"
++#include <asm/mach-types.h>
+ 
+ static LIST_HEAD(clocks);
+ static DECLARE_MUTEX(clocks_sem);
+@@ -447,8 +448,17 @@
+ static struct clk mclk_1510 = {
+ 	.name		= "mclk",
+ 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
++#if 0
+ 	.rate		= 12000000,
+ 	.flags		= CLOCK_IN_OMAP1510 | RATE_FIXED,
++#else
++	.flags		= CLOCK_IN_OMAP1510,
++	.enable_reg	= COM_CLK_DIV_CTRL_SEL,
++	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
++	.set_rate	= &set_ext_clk_rate,
++	.round_rate	= &round_ext_clk_rate,
++	.init		= &init_ext_clk,
++#endif
+ };
+ 
+ static struct clk mclk_16xx = {
+@@ -1247,6 +1257,9 @@
+ 	clk_use(&armxor_ck);
+ 	clk_use(&armtim_ck);
+ 
++	if (machine_is_h6300())
++		clk_enable(&lcd_ck);
++
+ 	if (cpu_is_omap1510())
+ 		clk_enable(&arm_gpio_ck);
+ 
+diff -Naur linux-2.6.12-rc5_omap1/arch/arm/mach-omap/dma.c linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/dma.c
+--- linux-2.6.12-rc5_omap1/arch/arm/mach-omap/dma.c	2005-08-23 22:36:30.615703332 +0300
++++ linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/dma.c	2005-08-23 22:38:07.480284420 +0300
+@@ -671,6 +671,7 @@
+ 	unsigned long top, bottom;
+ 	int es;
+ 	u16 w;
++	u16 l;
+ 	unsigned long en, fn;
+ 	long ei, fi;
+ 	unsigned long vxres;
+@@ -769,6 +770,10 @@
+ 	}
+ 
+ 	if (omap_dma_in_1510_mode()) {
++		l = omap_readw(OMAP1510_DMA_LCD_CTRL);
++		l &= ~(1 << 6);
++		omap_writew (l, OMAP1510_DMA_LCD_CTRL);
++
+ 		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+ 		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+ 		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+@@ -893,7 +898,6 @@
+ 	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+ 	w |= 1 << 7;
+ 	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+-
+ 	lcd_dma.active = 1;
+ }
+ 
+diff -Naur linux-2.6.12-rc5_omap1/arch/arm/mach-omap/mcbsp.c linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/mcbsp.c
+--- linux-2.6.12-rc5_omap1/arch/arm/mach-omap/mcbsp.c	2005-08-23 22:36:31.270599085 +0300
++++ linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/mcbsp.c	2005-08-23 22:38:07.481284261 +0300
+@@ -760,3 +760,4 @@
+ EXPORT_SYMBOL(omap_mcbsp_xmit_buffer);
+ EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
+ EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
++EXPORT_SYMBOL(omap_mcbsp_pollwrite);
+diff -Naur linux-2.6.12-rc5_omap1/arch/arm/mach-omap/omap1/board-h6300.c linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/omap1/board-h6300.c
+--- linux-2.6.12-rc5_omap1/arch/arm/mach-omap/omap1/board-h6300.c	1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/omap1/board-h6300.c	2005-08-23 22:38:07.482284102 +0300
+@@ -0,0 +1,143 @@
++/*
++ * linux/arch/arm/mach-omap/board-generic.c
++ *
++ * Modified from board-h6300.c
++ *
++ * Code for generic OMAP board. Should work on many OMAP systems where
++ * the device drivers take care of all the necessary hardware initialization.
++ * Do not put any board specific code to this file; create a new machine
++ * type if you need custom low-level initializations.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/delay.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++
++#include <asm/hardware.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <asm/mach/flash.h>
++#include <asm/mach/map.h>
++
++#include <asm/arch/gpio.h>
++#include <asm/arch/tc.h>
++#include <asm/arch/usb.h>
++
++#include "../common.h"
++
++static int __initdata h6300_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
++
++static struct mtd_partition h6300_partitions[] = {
++	/* bootloader (U-Boot, etc) in first sector */
++	{
++	      .name		= "bootloader",
++	      .offset		= 0,
++	      .size		= SZ_128K,
++	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
++	},
++	/* bootloader params in the next sector */
++	{
++	      .name		= "params",
++	      .offset		= MTDPART_OFS_APPEND,
++	      .size		= SZ_128K,
++	      .mask_flags	= 0,
++	},
++	/* kernel */
++	{
++	      .name		= "kernel",
++	      .offset		= MTDPART_OFS_APPEND,
++	      .size		= SZ_2M,
++	      .mask_flags	= 0
++	},
++	/* rest of flash1 is a file system */
++	{
++	      .name		= "rootfs",
++	      .offset		= MTDPART_OFS_APPEND,
++	      .size		= SZ_16M - SZ_2M - 2 * SZ_128K,
++	      .mask_flags	= 0
++	},
++	/* file system */
++	{
++	      .name		= "filesystem",
++	      .offset		= MTDPART_OFS_APPEND,
++	      .size		= MTDPART_SIZ_FULL,
++	      .mask_flags	= 0
++	}
++};
++
++static struct flash_platform_data h6300_flash_data = {
++	.map_name	= "cfi_probe",
++	.width		= 2,
++	.parts		= h6300_partitions,
++	.nr_parts	= ARRAY_SIZE(h6300_partitions),
++};
++
++static struct resource h6300_flash_resource = {
++	.start		= OMAP_CS0_PHYS,
++	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
++	.flags		= IORESOURCE_MEM,
++};
++
++static struct platform_device h6300_flash_device = {
++	.name		= "omapflash",
++	.id		= 0,
++	.dev		= {
++		.platform_data	= &h6300_flash_data,
++	},
++	.num_resources	= 1,
++	.resource	= &h6300_flash_resource,
++};
++
++static struct platform_device *h6300_devices[] __initdata = {
++	&h6300_flash_device,
++};
++
++static void __init h6300_init_irq(void)
++{
++	omap_init_irq();
++	omap_gpio_init();
++}
++
++/* assume no Mini-AB port */
++
++static struct omap_usb_config h6300_usb_config __initdata = {
++	.hmc_mode	      = 0,
++	.register_dev	  = 1,
++	.pins[0]        = 0,
++};
++
++static struct omap_board_config_kernel h6300_config[] = {
++	{ OMAP_TAG_USB,           &h6300_usb_config },
++};
++
++static void __init h6300_init(void)
++{
++	platform_add_devices(h6300_devices, ARRAY_SIZE(h6300_devices));
++	h6300_config[0].data = &h6300_usb_config;
++
++	omap_board_config = h6300_config;
++	omap_board_config_size = ARRAY_SIZE(h6300_config);
++}
++
++static void __init h6300_map_io(void)
++{
++	omap_map_common_io();
++	omap_serial_init(h6300_serial_ports);
++}
++
++MACHINE_START(H6300, "HP IPaq H6300")
++	MAINTAINER("Everett Coleman II <gcc80x86@fuzzyneural.net>")
++	BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
++	BOOT_PARAMS(0x10000100)
++	MAPIO(h6300_map_io)
++	INITIRQ(h6300_init_irq)
++	INIT_MACHINE(h6300_init)
++	.timer		= &omap_timer,
++MACHINE_END
+diff -Naur linux-2.6.12-rc5_omap1/arch/arm/mach-omap/omap1/Kconfig linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/omap1/Kconfig
+--- linux-2.6.12-rc5_omap1/arch/arm/mach-omap/omap1/Kconfig	2005-08-23 22:36:31.495563275 +0300
++++ linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/omap1/Kconfig	2005-08-23 22:38:07.515278850 +0300
+@@ -26,6 +26,12 @@
+           TI OMAP 1510 or 1610 Innovator board support. Say Y here if you
+           have such a board.
+ 
++config MACH_H6300
++	bool "HP IPaq H6300"
++	depends on ARCH_OMAP1 && ARCH_OMAP1510
++	help
++			HP IPaq H6300 series
++
+ config MACH_OMAP_H2
+ 	bool "TI H2 Support"
+ 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
+diff -Naur linux-2.6.12-rc5_omap1/arch/arm/mach-omap/omap1/Makefile linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/omap1/Makefile
+--- linux-2.6.12-rc5_omap1/arch/arm/mach-omap/omap1/Makefile	2005-08-23 22:36:31.564552293 +0300
++++ linux-2.6.12-rc5_omap1_h6300/arch/arm/mach-omap/omap1/Makefile	2005-08-23 22:38:07.516278691 +0300
+@@ -9,6 +9,7 @@
+ # Specific board support
+ obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o
+ obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
++obj-$(CONFIG_MACH_H6300)	+= board-h6300.o
+ obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+ obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
+ obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
+diff -Naur linux-2.6.12-rc5_omap1/drivers/input/touchscreen/omap/Makefile linux-2.6.12-rc5_omap1_h6300/drivers/input/touchscreen/omap/Makefile
+--- linux-2.6.12-rc5_omap1/drivers/input/touchscreen/omap/Makefile	2005-08-23 22:36:32.554394729 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/input/touchscreen/omap/Makefile	2005-08-23 22:38:07.550273279 +0300
+@@ -8,5 +8,6 @@
+ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_H3) += ts_hx.o
+ objs-$(CONFIG_ARCH_OMAP1510)$(CONFIG_MACH_OMAP_INNOVATOR) += ts_inn1510.o
+ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_OSK) += ts_osk.o
++objs-$(CONFIG_ARCH_OMAP1510)$(CONFIG_MACH_H6300) += ts_hx.o
+ 
+ omapts-objs := omap_ts.o $(objs-yy)
+diff -Naur linux-2.6.12-rc5_omap1/drivers/input/touchscreen/omap/omap_ts.c linux-2.6.12-rc5_omap1_h6300/drivers/input/touchscreen/omap/omap_ts.c
+--- linux-2.6.12-rc5_omap1/drivers/input/touchscreen/omap/omap_ts.c	2005-08-23 22:36:32.555394570 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/input/touchscreen/omap/omap_ts.c	2005-08-23 22:38:07.551273120 +0300
+@@ -39,14 +39,14 @@
+ 
+ #include <asm/mach-types.h>
+ 
+-//#define DEBUG
++#define DEBUG
+ 
+ #include "omap_ts.h"
+ 
+ #define OMAP_TS_NAME	"omap_ts"
+ 
+ static struct ts_device *__initdata ts_devs[] = {
+-#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
++#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) || defined(CONFIG_MACH_H6300)
+ 	&hx_ts,
+ #endif
+ #ifdef CONFIG_MACH_OMAP_OSK
+@@ -70,8 +70,7 @@
+ 	input_report_abs(&(ts_omap.inputdevice), ABS_PRESSURE, data[2]);
+ 	input_sync(&(ts_omap.inputdevice));
+ 
+-	DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1],
+-		 data[2]);
++	//DEBUG_TS("omap_ts_read: read x=%d,y=%d,p=%d\n", data[0], data[1], data[2]);
+ 
+ 	return 0;
+ }
+@@ -84,7 +83,7 @@
+ 
+ 	if (!ts_omap.dev->penup()) {
+ 		if (!ts_omap.touched) {
+-			DEBUG_TS("omap_ts_timer: pen down\n");
++			//DEBUG_TS("omap_ts_timer: pen down\n");
+ 			input_report_key(&(ts_omap.inputdevice), BTN_TOUCH, 1);
+ 		}
+ 		ts_omap.touched = 1;
+@@ -93,7 +92,7 @@
+ 		add_timer(&(ts_omap.ts_timer));
+ 	} else {
+ 		if (ts_omap.touched) {
+-			DEBUG_TS("omap_ts_timer: pen up\n");
++			//DEBUG_TS("omap_ts_timer: pen up\n");
+ 			ts_omap.touched = 0;
+ 			input_report_abs(&(ts_omap.inputdevice), ABS_X, 0);
+ 			input_report_abs(&(ts_omap.inputdevice), ABS_Y, 0);
+diff -Naur linux-2.6.12-rc5_omap1/drivers/input/touchscreen/omap/ts_hx.c linux-2.6.12-rc5_omap1_h6300/drivers/input/touchscreen/omap/ts_hx.c
+--- linux-2.6.12-rc5_omap1/drivers/input/touchscreen/omap/ts_hx.c	2005-08-23 22:36:32.588389317 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/input/touchscreen/omap/ts_hx.c	2005-08-23 22:38:07.585267709 +0300
+@@ -33,6 +33,7 @@
+ #include <asm/arch/mux.h>
+ #include <asm/arch/hardware.h>
+ #include <asm/hardware/tsc2101.h>
++#include <linux/delay.h>
+ 
+ #include "../drivers/ssi/omap-tsc2101.h"
+ #include "omap_ts.h"
+@@ -88,6 +89,9 @@
+ 	} else if (machine_is_omap_h3()) {
+ 		gpio = H3_GPIO_NUM;
+ 		omap_cfg_reg(W19_1610_GPIO48);
++	}else if (machine_is_h6300()) {
++		gpio = 2;
++		omap_cfg_reg(M14_1510_GPIO2);
+ 	} else
+ 		return -ENODEV;
+ 
+@@ -180,5 +184,8 @@
+ 		omap_free_gpio(H2_GPIO_NUM);
+ 	else if (machine_is_omap_h3())
+ 		omap_free_gpio(H3_GPIO_NUM);
++	else if (machine_is_h6300())
++		omap_free_gpio(2);
++
+ }
+ #endif
+diff -Naur linux-2.6.12-rc5_omap1/drivers/ssi/omap-tsc2101.c linux-2.6.12-rc5_omap1_h6300/drivers/ssi/omap-tsc2101.c
+--- linux-2.6.12-rc5_omap1/drivers/ssi/omap-tsc2101.c	2005-08-23 22:36:33.800196420 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/ssi/omap-tsc2101.c	2005-08-23 22:38:07.586267550 +0300
+@@ -25,6 +25,7 @@
+ #include <linux/delay.h>
+ 
+ #include <asm/system.h>
++#include <asm/arch/gpio.h>
+ #include <asm/irq.h>
+ #include <asm/io.h>
+ #include <asm/mach-types.h>
+@@ -39,7 +40,7 @@
+ 
+ #include "omap-tsc2101.h"
+ 
+-#if CONFIG_ARCH_OMAP16XX
++#if CONFIG_ARCH_OMAP1
+ #include <../drivers/ssi/omap-uwire.h>
+ #else
+ #error "Unsupported configuration"
+@@ -47,7 +48,7 @@
+ 
+ #define SPIO 1
+ 
+-static int count;
++static int count = 0;
+ static spinlock_t tsc2101_lock = SPIN_LOCK_UNLOCKED;
+ static struct clk  * tsc2101_mclk_ck;
+ 
+@@ -66,13 +67,12 @@
+ 	if (count++ == 0) {
+ 		int ret = 0;
+ 		/* set the Mux to provide MCLK to TSC2101 */
+-		if (machine_is_omap_h3()) {
++		if (machine_is_omap_h3())
+ 			ret = omap_cfg_reg(V5_1710_MCLK_ON);
+-		} else {
+-			if (machine_is_omap_h2()) {
+-				ret = omap_cfg_reg(R10_1610_MCLK_ON);
+-			}
+-		}
++		else if (machine_is_omap_h2())
++			ret = omap_cfg_reg(R10_1610_MCLK_ON);
++		else if (machine_is_h6300 ())
++			ret = omap_cfg_reg(R10_1610_MCLK_ON); // TODO: for now use the 1610 mux
+ 
+ 		/* Get the MCLK */
+ 		tsc2101_mclk_ck = clk_get(NULL, "mclk");
+@@ -108,19 +108,22 @@
+ 	if (--count == 0) {
+ 		int ret = 0;
+ 		/* Remove the Mux to Stop MCLK to TSC2101 */
+-		if (machine_is_omap_h3()) {
++		if (machine_is_omap_h3())
+ 			ret = omap_cfg_reg(V5_1710_MCLK_OFF);
+-		} else {
+-			if (machine_is_omap_h2()) {
+-				ret = omap_cfg_reg(R10_1610_MCLK_OFF);
+-			}
+-		}
++		else if (machine_is_omap_h2())
++			ret = omap_cfg_reg(R10_1610_MCLK_OFF);
++//		else if (machine_is_h6300 ())
++//			ret = omap_cfg_reg(R10_1610_MCLK_OFF); // TODO: for now use the 1610 mux
+ 
+ 		/* Release the MCLK */
+ 		clk_disable(tsc2101_mclk_ck);
+ 		clk_put(tsc2101_mclk_ck);
+ 		tsc2101_mclk_ck = NULL;
+ 
++#if defined(CONFIG_MACH_H6300)
++		omap_free_gpio(8);
++#endif
++
+ 		module_put(THIS_MODULE);
+ 	}
+ 	spin_unlock(&tsc2101_lock);
+@@ -130,57 +133,57 @@
+ {
+ 
+ 	int ret = 0;
++	int cs  = 0;
+ 
+-	if (machine_is_omap_h2()) {
+-		ret =
+-		    omap_uwire_data_transfer(1, 
+-					     (((page) << 11) | (address << 5)),
+-					     16, 0, NULL, 1);
+-		if (ret) {
+-			printk(KERN_ERR
+-			       "uwire-write returned error for address %x\n",
+-			       address);
+-			return;
+-		}
+-		ret = omap_uwire_data_transfer(1, data, 16, 0, NULL, 0);
+-		if (ret) {
+-			printk(KERN_ERR
+-			       "uwire-write returned error for address %x\n",
+-			       address);
+-			return;
+-		}
++	if (cpu_is_omap16xx ()) {
++		if (machine_is_omap_h2())
++			cs=1;
++		if (machine_is_omap_h3())
++			cs=0;
++	} else if (cpu_is_omap15xx ()) {
++		cs=0;
+ 	}
+-	if (machine_is_omap_h3()) {
+ 
+-		ret =
+-		    omap_uwire_data_transfer(0, ((page << 11) | (address << 5)),
+-					     16, 0, NULL, 1);
+-		if (ret) {
+-			printk(KERN_ERR
+-			       "uwire-write returned error for address %x\n",
+-			       address);
+-			return;
+-		}
+-		ret = omap_uwire_data_transfer(0, data, 16, 0, NULL, 0);
+-		if (ret) {
+-			printk(KERN_ERR
+-			       "uwire-write returned error for address %x\n",
+-			       address);
+-			return;
+-		}
++#if defined(CONFIG_MACH_H6300)
++	omap_set_gpio_dataout(8, 0);
++#endif
++
++	ret = omap_uwire_data_transfer(cs, 
++			(((page) << 11) | (address << 5)),
++			16, 0, NULL, 1);
++	if (ret) {
++		printk(KERN_ERR
++			"uwire-write returned error for address %x\n",
++			address);
++		omap_set_gpio_dataout(8, 1);
++		return;
++	}
++	ret = omap_uwire_data_transfer(cs, data, 16, 0, NULL, 0);
++	if (ret) {
++		printk(KERN_ERR
++			"uwire-write returned error for address %x\n",
++			address);
++		omap_set_gpio_dataout(8, 1);
++		return;
+ 	}
+ 
++#if defined(CONFIG_MACH_H6300)
++	omap_set_gpio_dataout(8, 1);
++#endif
+ }
+ 
+ void omap_tsc2101_reads(int page, u8 startaddress, u16 * data, int numregs)
+ {
+ 	int cs = 0, i;
+-	if (machine_is_omap_h2()) {
++	if (machine_is_omap_h2())
+ 		cs = 1;
+-	}
+-	if (machine_is_omap_h3()) {
++	if (machine_is_omap_h3())
+ 		cs = 0;
+-	}
++
++#if defined(CONFIG_MACH_H6300)
++	omap_set_gpio_dataout(8, 0);
++#endif
++
+ 	(void)omap_uwire_data_transfer(cs, (0x8000 | (page << 11)
+ 					    | (startaddress << 5)),
+ 				       16, 0, NULL, 1);
+@@ -188,11 +191,15 @@
+ 		omap_uwire_data_transfer(cs, 0, 0, 16, data, 1);
+ 	}
+ 	omap_uwire_data_transfer(cs, 0, 0, 16, data, 0);
++
++#if defined(CONFIG_MACH_H6300)
++	omap_set_gpio_dataout(8, 1);
++#endif
+ }
+ 
+ u16 omap_tsc2101_read(int page, u8 address)
+ {
+-	u16 ret;
++	u16 ret=0;
+ 	omap_tsc2101_reads(page, address, &ret, 1);
+ 	return ret;
+ }
+@@ -217,7 +224,6 @@
+ 		return err;
+ 	}
+ #endif
+-
+ 	if (machine_is_omap_h2()) {
+ 		uwire_flags = UWIRE_READ_RISING_EDGE | UWIRE_WRITE_RISING_EDGE;
+ 		omap_cfg_reg(N15_1610_UWIRE_CS1);
+@@ -228,9 +234,22 @@
+ 		omap_cfg_reg(N14_1610_UWIRE_CS0);
+ 		omap_uwire_configure_mode(0, uwire_flags);
+ 	}
++	if (machine_is_h6300()) {
++		uwire_flags = UWIRE_READ_RISING_EDGE | UWIRE_WRITE_RISING_EDGE;
++		omap_cfg_reg(X1_1510_UWIRE_CS0);
++		omap_uwire_configure_mode(0, uwire_flags);
++
++		omap_request_gpio(8);
++		omap_set_gpio_dataout(8, 0);
++                omap_set_gpio_direction (8, 0);
++	}
++
+ 
+ 	/* Configure MCLK enable */
+-	omap_writel(omap_readl(PU_PD_SEL_2) | (1 << 22), PU_PD_SEL_2);	
++	if (cpu_is_omap16xx ())
++		omap_writel(omap_readl(PU_PD_SEL_2) | (1 << 22), PU_PD_SEL_2);	
++	if (machine_is_h6300())
++		omap_cfg_reg(X1_1510_UWIRE_SDI);
+ 
+ 	return 0;
+ }
+@@ -243,5 +262,5 @@
+ 
+ MODULE_AUTHOR("Texas Instruments");
+ MODULE_DESCRIPTION
+-    ("Glue audio driver for the TI OMAP1610/OMAP1710 TSC2101 codec.");
++    ("Glue audio driver for the TI TSC2101 codec.");
+ MODULE_LICENSE("GPL");
+diff -Naur linux-2.6.12-rc5_omap1/drivers/ssi/omap-uwire.c linux-2.6.12-rc5_omap1_h6300/drivers/ssi/omap-uwire.c
+--- linux-2.6.12-rc5_omap1/drivers/ssi/omap-uwire.c	2005-08-23 22:36:33.827192123 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/ssi/omap-uwire.c	2005-08-23 22:38:07.586267550 +0300
+@@ -205,6 +205,11 @@
+ 		omap_cfg_reg(N14_1610_UWIRE_CS0);
+ 		omap_cfg_reg(N15_1610_UWIRE_CS1);
+ 	}
++
++	if (machine_is_h6300 ()) {
++		omap_cfg_reg(X1_1510_UWIRE_CS0);
++		omap_cfg_reg(X1_1510_UWIRE_CS3);
++	}
+ 	if (machine_is_omap_perseus2()) {
+ 		/* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */
+ 		int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000;
+diff -Naur linux-2.6.12-rc5_omap1/drivers/usb/gadget/omap_udc.c linux-2.6.12-rc5_omap1_h6300/drivers/usb/gadget/omap_udc.c
+--- linux-2.6.12-rc5_omap1/drivers/usb/gadget/omap_udc.c	2005-08-23 22:36:33.937174616 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/usb/gadget/omap_udc.c	2005-08-23 22:38:07.653256887 +0300
+@@ -2101,7 +2101,7 @@
+ 	/* boards that don't have VBUS sensing can't autogate 48MHz;
+ 	 * can't enter deep sleep while a gadget driver is active.
+ 	 */
+-	if (machine_is_omap_innovator() || machine_is_omap_osk())
++	if (machine_is_omap_innovator() || machine_is_omap_osk() || machine_is_h6300())
+ 		omap_vbus_session(&udc->gadget, 1);
+ 
+ done:
+@@ -2119,7 +2119,7 @@
+ 	if (!driver || driver != udc->driver)
+ 		return -EINVAL;
+ 
+-	if (machine_is_omap_innovator() || machine_is_omap_osk())
++	if (machine_is_omap_innovator() || machine_is_omap_osk() || machine_is_h6300())
+ 		omap_vbus_session(&udc->gadget, 0);
+ 
+ 	if (udc->transceiver)
+@@ -2727,7 +2727,7 @@
+ 		hmc = HMC_1510;
+ 		type = "(unknown)";
+ 
+-		if (machine_is_omap_innovator()) {
++		if (machine_is_omap_innovator() || machine_is_h6300()) {
+ 			/* just set up software VBUS detect, and then
+ 			 * later rig it so we always report VBUS.
+ 			 * FIXME without really sensing VBUS, we can't
+@@ -2957,6 +2957,11 @@
+ 
+ static int __init udc_init(void)
+ {
++#ifdef USE_DMA
++	if (machine_is_h6300())
++		use_dma=0;
++#endif
++
+ 	INFO("%s, version: " DRIVER_VERSION
+ #ifdef	USE_ISO
+ 		" (iso)"
+diff -Naur linux-2.6.12-rc5_omap1/drivers/usb/gadget/omap_udc.h linux-2.6.12-rc5_omap1_h6300/drivers/usb/gadget/omap_udc.h
+--- linux-2.6.12-rc5_omap1/drivers/usb/gadget/omap_udc.h	2005-08-23 22:36:33.939174298 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/usb/gadget/omap_udc.h	2005-08-23 22:37:10.616335999 +0300
+@@ -174,6 +174,7 @@
+ 	unsigned			ep0_set_config:1;
+ 	unsigned			ep0_reset_config:1;
+ 	unsigned			ep0_setup:1;
++
+ 	struct completion		*done;
+ };
+ 
+diff -Naur linux-2.6.12-rc5_omap1/drivers/video/omap/lcd_h6300.c linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/lcd_h6300.c
+--- linux-2.6.12-rc5_omap1/drivers/video/omap/lcd_h6300.c	1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/lcd_h6300.c	2005-08-23 22:38:07.655256568 +0300
+@@ -0,0 +1,90 @@
++/*
++ * File: drivers/video/omap_new/lcd-inn1510.c
++ *
++ * LCD panel support for the TI OMAP1510 Innovator board
++ *
++ * Copyright (C) 2004 Nokia Corporation
++ * Author: Imre Deak <imre.deak@nokia.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
++ */
++
++#include <linux/module.h>
++#include <asm/io.h>
++
++
++#include "omapfb.h"
++
++// #define OMAPFB_DBG 1
++
++#include "debug.h"
++
++static int h6300_panel_init(struct lcd_panel *panel)
++{
++	DBGENTER(1);
++	DBGLEAVE(1);
++	return 0;
++}
++
++static void h6300_panel_cleanup(struct lcd_panel *panel)
++{
++	DBGENTER(1);
++	DBGLEAVE(1);
++}
++
++static int h6300_panel_enable(struct lcd_panel *panel)
++{
++	DBGENTER(1);
++	DBGLEAVE(1);
++	return 0;
++}
++
++static void h6300_panel_disable(struct lcd_panel *panel)
++{
++	DBGENTER(1);
++	DBGLEAVE(1);
++}
++
++static unsigned long h6300_panel_get_caps(struct lcd_panel *panel)
++{
++	return 0;
++}
++
++static struct lcdc_video_mode mode240x320 = {
++	.x_res = 240,
++	.y_res = 320,
++	.pixel_clock = 12500,
++	.bpp = 16,
++	.hsw = 12,
++	.hfp = 10,
++	.hbp = 10,
++	.vsw = 3,
++	.vfp = 10,
++	.vbp = 3,
++	.pcd = 4,
++};
++
++struct lcd_panel h6300_panel = {
++	.name       = "h6300",
++	.config	    = LCD_PANEL_TFT,
++	.video_mode = &mode240x320,
++
++	.init	 = h6300_panel_init,
++	.cleanup = h6300_panel_cleanup,
++	.enable  = h6300_panel_enable,
++	.disable = h6300_panel_disable,
++	.get_caps= h6300_panel_get_caps,
++};
++
+diff -Naur linux-2.6.12-rc5_omap1/drivers/video/omap/Makefile linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/Makefile
+--- linux-2.6.12-rc5_omap1/drivers/video/omap/Makefile	2005-08-23 22:36:34.395101723 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/Makefile	2005-08-23 22:38:07.656256409 +0300
+@@ -11,6 +11,7 @@
+ objs-y$(CONFIG_MACH_OMAP_H2) += lcd_h2.o
+ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
+ objs-$(CONFIG_ARCH_OMAP1510)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
++objs-$(CONFIG_ARCH_OMAP1510)$(CONFIG_MACH_H6300) += lcd_h6300.o
+ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
+ objs-$(CONFIG_ARCH_OMAP730)$(CONFIG_MACH_OMAP_PERSEUS2) += lcd_p2.o
+ 
+diff -Naur linux-2.6.12-rc5_omap1/drivers/video/omap/omapfb.h linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/omapfb.h
+--- linux-2.6.12-rc5_omap1/drivers/video/omap/omapfb.h	2005-08-23 22:36:34.397101404 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/omapfb.h	2005-08-23 22:38:07.688251316 +0300
+@@ -316,6 +316,7 @@
+ extern struct lcd_panel osk_panel;
+ extern struct lcd_panel innovator1610_panel;
+ extern struct lcd_panel innovator1510_panel;
++extern struct lcd_panel h6300_panel;
+ 
+ extern struct lcd_ctrl omapfb_lcdc_ctrl;
+ 
+diff -Naur linux-2.6.12-rc5_omap1/drivers/video/omap/omapfb_main.c linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/omapfb_main.c
+--- linux-2.6.12-rc5_omap1/drivers/video/omap/omapfb_main.c	2005-08-23 22:36:34.472089467 +0300
++++ linux-2.6.12-rc5_omap1_h6300/drivers/video/omap/omapfb_main.c	2005-08-23 22:38:07.690250998 +0300
+@@ -108,6 +108,9 @@
+ 	&innovator1610_panel,
+ #endif
+ #endif
++#ifdef CONFIG_MACH_H6300
++	&h6300_panel,
++#endif
+ };
+ 
+ static struct lcd_ctrl *ctrls[] = {
+@@ -1881,6 +1884,8 @@
+ 			def_name = "inn1610";
+ 		if (machine_is_omap_innovator() && cpu_is_omap1510())
+ 			def_name = "inn1510";
++		if (machine_is_h6300())
++			def_name = "h6300";
+ 		if (def_name == NULL)
+ 			return -1;
+ 		strncpy(name, def_name, sizeof(name) - 1);
+diff -Naur linux-2.6.12-rc5_omap1/include/asm-arm/arch-omap/board-h6300.h linux-2.6.12-rc5_omap1_h6300/include/asm-arm/arch-omap/board-h6300.h
+--- linux-2.6.12-rc5_omap1/include/asm-arm/arch-omap/board-h6300.h	1970-01-01 02:00:00.000000000 +0200
++++ linux-2.6.12-rc5_omap1_h6300/include/asm-arm/arch-omap/board-h6300.h	2005-08-23 22:38:07.726245268 +0300
+@@ -0,0 +1,40 @@
++/*
++ * linux/include/asm-arm/arch-omap/board-innovator.h
++ *
++ * Copyright (C) 2001 RidgeRun, Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2 of the License, or (at your
++ * option) any later version.
++ *
++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 675 Mass Ave, Cambridge, MA 02139, USA.
++ */
++#ifndef __ASM_ARCH_H6300_H
++#define __ASM_ARCH_H6300_H
++
++#ifndef OMAP_SDRAM_DEVICE
++#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
++#endif
++
++#define OMAP1510P1_IMIF_PRI_VALUE		0x00
++#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
++#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
++
++#define NR_FPGA_IRQS		24
++#define NR_IRQS                 IH_BOARD_BASE + NR_FPGA_IRQS
++
++#endif /* __ASM_ARCH_H6300_H */
+diff -Naur linux-2.6.12-rc5_omap1/include/asm-arm/arch-omap/hardware.h linux-2.6.12-rc5_omap1_h6300/include/asm-arm/arch-omap/hardware.h
+--- linux-2.6.12-rc5_omap1/include/asm-arm/arch-omap/hardware.h	2005-08-23 22:36:34.980008616 +0300
++++ linux-2.6.12-rc5_omap1_h6300/include/asm-arm/arch-omap/hardware.h	2005-08-23 22:38:07.727245109 +0300
+@@ -299,6 +299,10 @@
+ #include "board-innovator.h"
+ #endif
+ 
++#ifdef CONFIG_MACH_H6300
++#include "board-h6300.h"
++#endif
++
+ #ifdef CONFIG_MACH_OMAP_H2
+ #include "board-h2.h"
+ #endif
+diff -Naur linux-2.6.12-rc5_omap1/include/asm-arm/arch-omap/mux.h linux-2.6.12-rc5_omap1_h6300/include/asm-arm/arch-omap/mux.h
+--- linux-2.6.12-rc5_omap1/include/asm-arm/arch-omap/mux.h	2005-08-23 22:36:35.014003205 +0300
++++ linux-2.6.12-rc5_omap1_h6300/include/asm-arm/arch-omap/mux.h	2005-08-23 22:38:07.795234287 +0300
+@@ -250,9 +250,16 @@
+ 	U18_1610_UWIRE_SDI,
+ 	W21_1610_UWIRE_SDO,
+ 	N14_1610_UWIRE_CS0,
+-	P15_1610_UWIRE_CS0,
++	P15_1610_UWIRE_CS3,
+ 	N15_1610_UWIRE_CS1,
+ 
++	/* OMAP-1510 uWire */
++	X1_1510_UWIRE_CS3,
++	X1_1510_UWIRE_CS0,
++	X1_1510_UWIRE_SCLK,
++	X1_1510_UWIRE_SDO,
++	X1_1510_UWIRE_SDI,
++
+ 	/* OMAP-1610 Flash */
+ 	L3_1610_FLASH_CS2B_OE,
+ 	M8_1610_FLASH_CS2B_WE,
+@@ -481,6 +488,13 @@
+ MUX_CFG("P15_1610_UWIRE_CS3",	 8,   12,    1,	  1,  22,   0,	  1,	 1,  1)
+ MUX_CFG("N15_1610_UWIRE_CS1",	 7,   18,    2,	  1,  14,   0,	 NA,	 0,  1)
+ 
++/* OMAP-1510 uWire */
++MUX_CFG("X1_1510_UWIRE_CS3",  8, 12, 1, NA, 0, 0,  NA, 0, 1)
++MUX_CFG("X1_1510_UWIRE_CS0",  8, 9,  1, NA, 0, 0,  NA, 0, 1)
++MUX_CFG("X1_1510_UWIRE_SCLK", 8, 6,  0, NA, 0, 0,  NA, 0, 1)
++MUX_CFG("X1_1510_UWIRE_SDO",  8, 3,  0, NA, 0, 0,  NA, 0, 1)
++MUX_CFG("X1_1510_UWIRE_SDI",  8, 0,  0, 1,  18, 1, NA, 0, 1)
++
+ /* OMAP-1610 Flash */
+ MUX_CFG("L3_1610_FLASH_CS2B_OE",10,    6,    1,	 NA,   0,   0,	 NA,	 0,  1)
+ MUX_CFG("M8_1610_FLASH_CS2B_WE",10,    3,    1,	 NA,   0,   0,	 NA,	 0,  1)
+@@ -545,7 +559,8 @@
+ /* MCLK Settings */
+ MUX_CFG("V5_1710_MCLK_ON",	 B,   15,    0,	  NA,   0,   0,   NA,	 0,  0)
+ MUX_CFG("V5_1710_MCLK_OFF",	 B,   15,    6,	  NA,   0,   0,   NA,	 0,  0)
+-MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0)
++/* orig: MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  0) */
++MUX_CFG("R10_1610_MCLK_ON",	 B,   18,    0,	  NA,  22,   0,	  NA,	 1,  1)
+ MUX_CFG("R10_1610_MCLK_OFF",	 B,   18,    6,	  2,   22,   1,	  2,	 1,  1)
+ 
+ /* CompactFlash controller, conflicts with MMC1 */
+diff -Naur linux-2.6.12-rc5_omap1/include/asm-arm/cpu-single.h linux-2.6.12-rc5_omap1_h6300/include/asm-arm/cpu-single.h
+--- linux-2.6.12-rc5_omap1/include/asm-arm/cpu-single.h	2005-05-25 06:31:20.000000000 +0300
++++ linux-2.6.12-rc5_omap1_h6300/include/asm-arm/cpu-single.h	2005-08-23 22:38:07.817230785 +0300
+@@ -41,4 +41,4 @@
+ extern void cpu_dcache_clean_area(void *, int);
+ extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+ extern void cpu_set_pte(pte_t *ptep, pte_t pte);
+-extern volatile void cpu_reset(unsigned long addr);
++extern void cpu_reset(unsigned long addr);
+diff -Naur linux-2.6.12-rc5_omap1/Makefile linux-2.6.12-rc5_omap1_h6300/Makefile
+--- linux-2.6.12-rc5_omap1/Makefile	2005-08-23 22:36:35.409940179 +0300
++++ linux-2.6.12-rc5_omap1_h6300/Makefile	2005-08-23 22:38:07.818230626 +0300
+@@ -11,7 +11,7 @@
+ # expect to learn how to build the kernel reading this file.
+ 
+ # Add custom flags here to avoid conflict with updates
+-EXTRAVERSION := $(EXTRAVERSION)-omap2
++EXTRAVERSION := $(EXTRAVERSION)-omap1-h6300
+ 
+ # Do not print "Entering directory ..."
+ MAKEFLAGS += --no-print-directory
+diff -Naur linux-2.6.12-rc5_omap1/sound/oss/Kconfig linux-2.6.12-rc5_omap1_h6300/sound/oss/Kconfig
+--- linux-2.6.12-rc5_omap1/sound/oss/Kconfig	2005-08-23 22:36:35.439935405 +0300
++++ linux-2.6.12-rc5_omap1_h6300/sound/oss/Kconfig	2005-08-23 22:38:07.849225692 +0300
+@@ -12,7 +12,7 @@
+ 
+ config SOUND_OMAP_TSC2101
+ 	tristate "TSC2101 Stereo Codec"
+-	depends on SOUND_OMAP && ( MACH_OMAP_H2 || MACH_OMAP_H3 )
++	depends on SOUND_OMAP && ARCH_OMAP1
+ 	select OMAP_TSC2101
+ 	select OMAP_UWIRE if ARCH_OMAP
+ 	---help---
+diff -Naur linux-2.6.12-rc5_omap1/sound/oss/omap-audio.c linux-2.6.12-rc5_omap1_h6300/sound/oss/omap-audio.c
+--- linux-2.6.12-rc5_omap1/sound/oss/omap-audio.c	2005-08-23 22:36:35.498926014 +0300
++++ linux-2.6.12-rc5_omap1_h6300/sound/oss/omap-audio.c	2005-08-23 22:38:07.895218371 +0300
+@@ -56,8 +56,8 @@
+ 
+ /***************************** MACROS ************************************/
+ 
+-#undef DEBUG
+-//#define DEBUG
++//#undef DEBUG
++#define DEBUG
+ #ifdef DEBUG
+ #define DPRINTK  printk
+ #define FN_IN printk("[omap_audio.c:[%s] start\n", __FUNCTION__)
+diff -Naur linux-2.6.12-rc5_omap1/sound/oss/omap-audio-tsc2101.c linux-2.6.12-rc5_omap1_h6300/sound/oss/omap-audio-tsc2101.c
+--- linux-2.6.12-rc5_omap1/sound/oss/omap-audio-tsc2101.c	2005-08-23 22:36:35.557916624 +0300
++++ linux-2.6.12-rc5_omap1_h6300/sound/oss/omap-audio-tsc2101.c	2005-08-23 22:38:07.897218053 +0300
+@@ -48,7 +48,7 @@
+ #include "omap-audio.h"
+ #include "omap-audio-dma-intfc.h"
+ #include <asm/arch/mcbsp.h>
+-#if CONFIG_ARCH_OMAP16XX
++#if CONFIG_ARCH_OMAP1
+ #include <../drivers/ssi/omap-uwire.h>
+ #include <asm/arch/dsp_common.h>
+ #else
+@@ -70,12 +70,14 @@
+ 
+ #define CODEC_NAME		 "TSC2101"
+ 
+-#if CONFIG_ARCH_OMAP16XX
+-#define PLATFORM_NAME "OMAP16XX"
++#if CONFIG_ARCH_OMAP1
++#define PLATFORM_NAME "OMAP"
+ #endif
+ 
+ #if CONFIG_ARCH_OMAP16XX
+ #define OMAP_DSP_BASE        0xE0000000
++#elif CONFIG_ARCH_OMAP1510
++#define OMAP_DSP_BASE        0xE0000000
+ #endif
+ 
+ /* Define to set the tsc as the master w.r.t McBSP */
+@@ -91,9 +93,15 @@
+ 
+ /* Select the McBSP For Audio */
+ #if CONFIG_ARCH_OMAP16XX
+-#define AUDIO_MCBSP                   OMAP_MCBSP1
++# define AUDIO_MCBSP                   OMAP_MCBSP1
++# define AUDIO_DMA_TX                  OMAP_DMA_MCBSP1_TX
++# define AUDIO_DMA_RX                  OMAP_DMA_MCBSP1_RX
++#elif CONFIG_ARCH_OMAP1510
++#	define AUDIO_MCBSP                   OMAP_MCBSP1
++# define AUDIO_DMA_TX                  OMAP_DMA_MCBSP1_TX
++# define AUDIO_DMA_RX                  OMAP_DMA_MCBSP1_RX
+ #else
+-#error "UnSupported Configuration"
++#	error "UnSupported Configuration"
+ #endif
+ 
+ #define REC_MASK 			          (SOUND_MASK_LINE | SOUND_MASK_MIC)
+@@ -123,18 +131,18 @@
+ 
+ /*********** Debug Macros ********/
+ /* To Generate a rather shrill tone -test the entire path */
+-//#define TONE_GEN
++#define TONE_GEN
+ /* To Generate a tone for each keyclick - test the tsc,spi paths*/
+-//#define TEST_KEYCLICK
++#define TEST_KEYCLICK
+ /* To dump the tsc registers for debug */
+-//#define TSC_DUMP_REGISTERS
++#define TSC_DUMP_REGISTERS
+ 
+ #ifdef DPRINTK
+ #undef DPRINTK
+ #endif
+ #undef DEBUG
+ 
+-//#define DEBUG
++#define DEBUG
+ #ifdef DEBUG
+ #define DPRINTK(ARGS...)  printk(KERN_INFO "<%s>: ",__FUNCTION__);printk(ARGS)
+ #define FN_IN printk(KERN_INFO "[%s]: start\n", __FUNCTION__)
+@@ -149,13 +157,13 @@
+ 
+ static audio_stream_t output_stream = {
+ 	.id              = "TSC2101 out",
+-	.dma_dev         = OMAP_DMA_MCBSP1_TX,
++	.dma_dev         = AUDIO_DMA_TX,
+ 	.input_or_output = FMODE_WRITE
+ };
+ 
+ static audio_stream_t input_stream = {
+ 	.id              = "TSC2101 in",
+-	.dma_dev         = OMAP_DMA_MCBSP1_RX,
++	.dma_dev         = AUDIO_DMA_RX,
+ 	.input_or_output = FMODE_READ
+ };
+ 
+@@ -215,6 +223,17 @@
+ };
+ 
+ static struct omap_mcbsp_reg_cfg initial_config = {
++#if CONFIG_MACH_H6300
++	.spcr2 = 0x0005,
++	.spcr1 = 0x0005,
++	.rcr2  = 0x8041,
++	.rcr1  = 0x8041,
++	.xcr2  = 0x00a1,
++	.xcr1  = 0x00a1,
++	.srgr2 = 0xb000,
++	.srgr1 = 0xb000,
++	.pcr0  = 0x0081,
++#else
+ 	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+ 	.spcr1 = RINTM(3) | RRST,
+ 	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+@@ -230,14 +249,13 @@
+ #if CONFIG_MACH_OMAP_H2
+ 	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
+ #elif CONFIG_MACH_OMAP_H3
+-
+-#ifndef TSC_MASTER
++#	ifndef TSC_MASTER
+ 	.pcr0  = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,
+-#else
++#		else
+ 	.pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
+-#endif				/* tsc Master defs */
+-
++#	endif				/* tsc Master defs */
+ #endif				/* platform specific inits */
++#endif
+ };
+ 
+ /***************************** MODULES SPECIFIC FUNCTION PROTOTYPES ********************/
+@@ -1218,5 +1236,5 @@
+ 
+ MODULE_AUTHOR("Texas Instruments");
+ MODULE_DESCRIPTION
+-    ("Glue audio driver for the TI OMAP1610/OMAP1710 TSC2101 codec.");
++    ("Glue audio driver for the TI OMAP TSC2101 codec.");
+ MODULE_LICENSE("GPL");