rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 66 insertions, 0 deletions

diff --git a/recipes/linux/linux-2.6.24/ts72xx/ep93xx-serial-uartbaud.diff b/recipes/linux/linux-2.6.24/ts72xx/ep93xx-serial-uartbaud.diff
new file mode 100644
index 0000000000..7183ab626e
--- /dev/null
+++ b/recipes/linux/linux-2.6.24/ts72xx/ep93xx-serial-uartbaud.diff
@@ -0,0 +1,66 @@
+
+Force UARTBAUD on before uncompressing.
+
+Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
+
+Index: linux-2.6.22/include/asm-arm/arch-ep93xx/uncompress.h
+===================================================================
+--- linux-2.6.22.orig/include/asm-arm/arch-ep93xx/uncompress.h
++++ linux-2.6.22/include/asm-arm/arch-ep93xx/uncompress.h
+@@ -77,9 +77,56 @@ static void ethernet_reset(void)
+ }
+ 
+ 
++/*
++ * Some bootloaders don't turn on the UARTBAUD bit, which means that
++ * the UARTs will be running off a divided 7.3728 MHz clock instead of
++ * the 14.7456 MHz peripheral clock when linux boots.
++ *
++ * We detect that condition here and fix it by turning on UARTBAUD, and
++ * then reprogramming the divisors on all enabled UARTs to twice what
++ * they were before we turned UARTBAUD on, to preserve the programmed
++ * baud rate.
++ */
++#define PHYS_SYSCON_CLOCK_CONTROL	0x80930004
++#define SYSCON_CLOCK_UARTBAUD		0x20000000
++#define PHYS_UART1_BASE			0x808c0000
++#define PHYS_UART2_BASE			0x808d0000
++#define PHYS_UART3_BASE			0x808e0000
++
++static void uart_divisor_times_two(unsigned int base)
++{
++	u16 divisor;
++
++	divisor = __raw_readb(base + 0x0c) << 8;
++	divisor |= __raw_readb(base + 0x10);
++	if (divisor) {
++		divisor = (2 * (divisor + 1)) - 1;
++		__raw_writeb(divisor >> 8, base + 0x0c);
++		__raw_writeb(divisor & 0xff, base + 0x10);
++		__raw_writeb(__raw_readb(base + 0x08), base + 0x08);
++	}
++}
++
++static void fix_uart_base(void)
++{
++	unsigned int v;
++
++	v = __raw_readl(PHYS_SYSCON_CLOCK_CONTROL);
++	if ((v & SYSCON_CLOCK_UARTBAUD) == 0) {
++		v |= SYSCON_CLOCK_UARTBAUD;
++		__raw_writel(v, PHYS_SYSCON_CLOCK_CONTROL);
++
++		uart_divisor_times_two(PHYS_UART1_BASE);
++		uart_divisor_times_two(PHYS_UART2_BASE);
++		uart_divisor_times_two(PHYS_UART3_BASE);
++	}
++}
++
++
+ static void arch_decomp_setup(void)
+ {
+ 	ethernet_reset();
++	fix_uart_base();
+ }
+ 
+ #define arch_decomp_wdog()