rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 392 insertions, 0 deletions

diff --git a/recipes/linux/gumstix-kernel-2.6.21/smc911x-fixup.patch b/recipes/linux/gumstix-kernel-2.6.21/smc911x-fixup.patch
new file mode 100644
index 0000000000..7e051f9fb6
--- /dev/null
+++ b/recipes/linux/gumstix-kernel-2.6.21/smc911x-fixup.patch
@@ -0,0 +1,392 @@
+Index: linux-2.6.21gum/drivers/net/smc911x.c
+===================================================================
+--- linux-2.6.21gum.orig/drivers/net/smc911x.c
++++ linux-2.6.21gum/drivers/net/smc911x.c
+@@ -76,6 +76,7 @@ static const char version[] =
+ #include <linux/etherdevice.h>
+ #include <linux/skbuff.h>
+ 
++#include <linux/irq.h>
+ #include <asm/io.h>
+ #include <asm/irq.h>
+ 
+@@ -303,14 +304,14 @@ static void smc911x_reset(struct net_dev
+ 	SMC_SET_AFC_CFG(lp->afc_cfg);
+ 
+ 
+-	/* Set to LED outputs */
+-	SMC_SET_GPIO_CFG(0x70070000);
++	/* Set to LED outputs and configure EEPROM pins as GP outputs */
++	SMC_SET_GPIO_CFG(GPIO_CFG_LED1_EN_ | GPIO_CFG_LED2_EN_ | 1 << 20);
+ 
+ 	/*
+-	 * Deassert IRQ for 1*10us for edge type interrupts
++	 * Deassert IRQ for 22*10us for edge type interrupts
+ 	 * and drive IRQ pin push-pull
+ 	 */
+-	SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ );
++	SMC_SET_IRQ_CFG( (22 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ );
+ 
+ 	/* clear anything saved */
+ 	if (lp->pending_tx_skb != NULL) {
+@@ -413,7 +414,7 @@ static inline void smc911x_drop_pkt(stru
+ 	if (fifo_count <= 4) {
+ 		/* Manually dump the packet data */
+ 		while (fifo_count--)
+-			SMC_GET_RX_FIFO();
++			(void)SMC_GET_RX_FIFO();
+ 	} else	 {
+ 		/* Fast forward through the bad packet */
+ 		SMC_SET_RX_DP_CTRL(RX_DP_CTRL_FFWD_BUSY_);
+@@ -499,7 +500,7 @@ static inline void	 smc911x_rcv(struct n
+ 		SMC_SET_RX_CFG(RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_));
+ 		SMC_PULL_DATA(data, pkt_len+2+3);
+ 
+-		DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name,);
++		DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name);
+ 		PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64);
+ 		dev->last_rx = jiffies;
+ 		skb->dev = dev;
+@@ -900,6 +901,7 @@ static void smc911x_phy_powerdown(struct
+ 	unsigned long ioaddr = dev->base_addr;
+ 	unsigned int bmcr;
+ 
++	DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __FUNCTION__);
+ 	/* Enter Link Disable state */
+ 	SMC_GET_PHY_BMCR(phy, bmcr);
+ 	bmcr |= BMCR_PDOWN;
+@@ -925,6 +927,7 @@ static void smc911x_phy_check_media(stru
+ 
+ 	if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
+ 		/* duplex state has changed */
++		DBG(SMC_DEBUG_MISC, "%s: duplex state has changed\n", dev->name);
+ 		SMC_GET_PHY_BMCR(phyaddr, bmcr);
+ 		SMC_GET_MAC_CR(cr);
+ 		if (lp->mii.full_duplex) {
+@@ -960,6 +963,7 @@ static void smc911x_phy_configure(struct
+ 	int my_phy_caps; /* My PHY capabilities */
+ 	int my_ad_caps; /* My Advertised capabilities */
+ 	int status;
++	int bmcr;
+ 	unsigned long flags;
+ 
+ 	DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __FUNCTION__);
+@@ -1033,9 +1037,12 @@ static void smc911x_phy_configure(struct
+ 
+ 	DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps);
+ 	DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps);
++	DBG(SMC_DEBUG_MISC, "%s: phy advertised readback caps=0x%04x\n", dev->name, status);
+ 
+ 	/* Restart auto-negotiation process in order to advertise my caps */
+-	SMC_SET_PHY_BMCR(phyaddr, BMCR_ANENABLE | BMCR_ANRESTART);
++	SMC_GET_PHY_BMCR(phyaddr, bmcr);
++	bmcr |= BMCR_ANENABLE | BMCR_ANRESTART;
++	SMC_SET_PHY_BMCR(phyaddr, bmcr);
+ 
+ 	smc911x_phy_check_media(dev, 1);
+ 
+@@ -1888,6 +1895,39 @@ static int __init smc911x_findirq(unsign
+ 	return probe_irq_off(cookie);
+ }
+ 
++static inline unsigned int is_gumstix_oui(u8 *addr)
++{
++	return (addr[0] == 0x00 && addr[1] == 0x15 && addr[2] == 0xC9);
++}
++
++/**
++ * gen_serial_ether_addr - Generate software assigned Ethernet address
++ * based on the system_serial number
++ * @addr: Pointer to a six-byte array containing the Ethernet address
++ *
++ * Generate an Ethernet address (MAC) that is not multicast
++ * and has the local assigned bit set, keyed on the system_serial
++ */
++static inline void gen_serial_ether_addr(u8 *addr)
++{
++	static u8 ether_serial_digit = 0;
++	addr [0] = system_serial_high >> 8;
++	addr [1] = system_serial_high;
++	addr [2] = system_serial_low >> 24;
++	addr [3] = system_serial_low >> 16;
++	addr [4] = system_serial_low >> 8;
++	addr [5] = (system_serial_low & 0xc0) |	/* top bits are from system serial */
++		(1 << 4) |			/* 2 bits identify interface type 1=ether, 2=usb, 3&4 undef */
++		((ether_serial_digit++) & 0x0f);	/* 15 possible interfaces of each type */
++
++	if(!is_gumstix_oui(addr))
++	{
++		addr [0] &= 0xfe;		/* clear multicast bit */
++		addr [0] |= 0x02;		/* set local assignment bit (IEEE802) */
++	}
++}
++
++
+ /*
+  * Function: smc911x_probe(unsigned long ioaddr)
+  *
+@@ -2116,15 +2156,13 @@ static int __init smc911x_probe(struct n
+ #endif
+ 		printk("\n");
+ 		if (!is_valid_ether_addr(dev->dev_addr)) {
+-			printk("%s: Invalid ethernet MAC address. Please "
+-					"set using ifconfig\n", dev->name);
+-		} else {
+-			/* Print the Ethernet address */
+-			printk("%s: Ethernet addr: ", dev->name);
+-			for (i = 0; i < 5; i++)
+-				printk("%2.2x:", dev->dev_addr[i]);
+-			printk("%2.2x\n", dev->dev_addr[5]);
++			gen_serial_ether_addr(dev->dev_addr);
+ 		}
++		/* Print the Ethernet address */
++		printk("%s: Ethernet addr: ", dev->name);
++		for (i = 0; i < 5; i++)
++			printk("%2.2x:", dev->dev_addr[i]);
++		printk("%2.2x\n", dev->dev_addr[5]);
+ 
+ 		if (lp->phy_type == 0) {
+ 			PRINTK("%s: No PHY found\n", dev->name);
+@@ -2300,8 +2338,15 @@ static struct platform_driver smc911x_dr
+ 	},
+ };
+ 
++#ifdef CONFIG_ARCH_GUMSTIX
++extern void gumstix_smc911x_load(void);
++#endif
++
+ static int __init smc911x_init(void)
+ {
++#ifdef CONFIG_ARCH_GUMSTIX
++	gumstix_smc911x_load();
++#endif
+ 	return platform_driver_register(&smc911x_driver);
+ }
+ 
+Index: linux-2.6.21gum/drivers/net/gumstix-smc911x.c
+===================================================================
+--- /dev/null
++++ linux-2.6.21gum/drivers/net/gumstix-smc911x.c
+@@ -0,0 +1,148 @@
++/*
++ *  Gumstix SMC911x chip intialization driver
++ *
++ *  Author:     Craig Hughes
++ *  Created:    December 9, 2004
++ *  Copyright:  (C) 2004 Craig Hughes
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/ioport.h>
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/delay.h>
++
++#include <asm/hardware.h>
++#include <asm/arch/pxa-regs.h>
++#include <asm/delay.h>
++
++#include <asm/arch/gumstix.h>
++
++#define SMC_DEBUG               9
++#include <asm/io.h>
++#include "smc911x.h"
++
++static struct resource gumstix_smc911x0_resources[] = {
++	[0] = {
++		.name	= "smc911x-regs",
++		.start  = PXA_CS1_PHYS,
++		.end    = PXA_CS1_PHYS + 0x000fffff,
++		.flags  = IORESOURCE_MEM,
++	},
++	[1] = {
++		.start  = GUMSTIX_ETH0_IRQ,
++		.end    = GUMSTIX_ETH0_IRQ,
++		.flags  = IORESOURCE_IRQ,
++	},
++};
++
++static struct resource gumstix_smc911x1_resources[] = {
++	[0] = {
++		.name	= "smc911x-regs",
++		.start	= PXA_CS2_PHYS,
++		.end	= PXA_CS2_PHYS + 0x000fffff,
++		.flags	= IORESOURCE_MEM,
++	},
++	[1] = {
++		.start	= GUMSTIX_ETH1_IRQ,
++		.end	= GUMSTIX_ETH1_IRQ,
++		.flags	= IORESOURCE_IRQ,
++	},
++};
++
++static struct platform_device gumstix_smc911x0_device = {
++	.name           = "smc911x",
++	.id             = 0,
++	.num_resources  = ARRAY_SIZE(gumstix_smc911x0_resources),
++	.resource       = gumstix_smc911x0_resources,
++};
++
++static struct platform_device gumstix_smc911x1_device = {
++	.name           = "smc911x",
++	.id             = 1,
++	.num_resources  = ARRAY_SIZE(gumstix_smc911x1_resources),
++	.resource       = gumstix_smc911x1_resources,
++};
++
++static struct platform_device *smc911x_devices[] = {
++	&gumstix_smc911x0_device,
++	&gumstix_smc911x1_device,
++};
++
++/* First we're going to test if there's a 2nd SMC911x, and if not, then we'll free up those resources and the GPIO lines
++ * that it would otherwise use.  We have no choice but to probe by doing:
++ * Set nCS2 to CS2 mode
++ * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset)
++ * Read from the memory space to check for the sentinel sequence identifying a likely SMC911x device
++ */
++int __init gumstix_smc911x_init(void)
++{
++	unsigned int val, num_devices=ARRAY_SIZE(smc911x_devices);
++	void *ioaddr;
++
++	/* Set up nPWE */
++	pxa_gpio_mode(GPIO49_nPWE_MD);
++
++	pxa_gpio_mode(GPIO78_nCS_2_MD);
++	// If either if statement fails, then we'll drop out and turn_off_eth1,
++	// if both succeed, then we'll skip that and just proceed with 2 cards
++	if(request_mem_region(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT, "smc911x probe"))
++	{
++		ioaddr = ioremap(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT);
++		val = SMC_GET_PN();
++		iounmap(ioaddr);
++		release_mem_region(gumstix_smc911x1_resources[1].start, SMC911X_IO_EXTENT);
++		if (CHIP_9115 == val ||
++			CHIP_9116 == val ||
++			CHIP_9117 == val ||
++			CHIP_9118 == val ) {
++			goto proceed;
++		}
++	}
++
++turn_off_eth1:
++	// This is apparently not an SMC911x
++	// So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode
++	num_devices--;
++	smc911x_devices[1] = NULL;
++	pxa_gpio_mode(78 | GPIO_IN);
++	
++proceed:
++	pxa_gpio_mode(GPIO15_nCS_1_MD);
++
++	if(smc911x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
++	pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD);
++
++	if(smc911x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
++	GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
++	msleep(500); // Hold RESET for at least 200µ
++
++	if(smc911x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
++	GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
++	msleep(50);
++
++	return platform_add_devices(smc911x_devices, num_devices);
++}
++
++void __exit gumstix_smc911x_exit(void)
++{
++	if(smc911x_devices[1] != NULL) platform_device_unregister(&gumstix_smc911x1_device);
++	platform_device_unregister(&gumstix_smc911x0_device);
++}
++
++void gumstix_smc911x_load(void) {}
++EXPORT_SYMBOL(gumstix_smc911x_load);
++
++module_init(gumstix_smc911x_init);
++module_exit(gumstix_smc911x_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Craig Hughes <craig@gumstix.com>");
++MODULE_DESCRIPTION("Gumstix board SMC911x chip initialization driver");
++MODULE_VERSION("1:0.1");
+Index: linux-2.6.21gum/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.21gum.orig/drivers/net/Kconfig
++++ linux-2.6.21gum/drivers/net/Kconfig
+@@ -897,6 +897,13 @@ config SMC911X
+ 	  called smc911x.  If you want to compile it as a module, say M 
+ 	  here and read <file:Documentation/modules.txt>
+ 
++config SMC911X_GUMSTIX
++	tristate
++	default m if SMC911X=m
++	default y if SMC911X=y
++	depends on SMC911X && ARCH_GUMSTIX
++
++
+ config NET_VENDOR_RACAL
+ 	bool "Racal-Interlan (Micom) NI cards"
+ 	depends on NET_ETHERNET && ISA
+Index: linux-2.6.21gum/drivers/net/Makefile
+===================================================================
+--- linux-2.6.21gum.orig/drivers/net/Makefile
++++ linux-2.6.21gum/drivers/net/Makefile
+@@ -201,6 +201,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+ obj-$(CONFIG_MACB) += macb.o
+ 
+ obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o
++obj-$(CONFIG_SMC911X_GUMSTIX) += gumstix-smc911x.o
+ obj-$(CONFIG_ARM) += arm/
+ obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+ obj-$(CONFIG_TR) += tokenring/
+Index: linux-2.6.21gum/include/asm-arm/arch-pxa/gumstix.h
+===================================================================
+--- linux-2.6.21gum.orig/include/asm-arm/arch-pxa/gumstix.h
++++ linux-2.6.21gum/include/asm-arm/arch-pxa/gumstix.h
+@@ -52,7 +52,7 @@
+ #define GPIO_GUMSTIX_ETH0_RST		80
+ #define GPIO_GUMSTIX_ETH0		36
+ #else
+-#define GPIO_GUMSTIX_ETH0_RST		32
++#define GPIO_GUMSTIX_ETH0_RST		107
+ #define GPIO_GUMSTIX_ETH0		99
+ #endif
+ #define GPIO_GUMSTIX_ETH1_RST		52
+Index: linux-2.6.21gum/drivers/net/smc911x.h
+===================================================================
+--- linux-2.6.21gum.orig/drivers/net/smc911x.h
++++ linux-2.6.21gum/drivers/net/smc911x.h
+@@ -33,7 +33,9 @@
+  * Use the DMA feature on PXA chips
+  */
+ #ifdef CONFIG_ARCH_PXA
++#if !defined( CONFIG_SMC911X_GUMSTIX ) && !defined( CONFIG_SMC911X_GUMSTIX_MODULE )
+   #define SMC_USE_PXA_DMA	1
++#endif
+   #define SMC_USE_16BIT		0
+   #define SMC_USE_32BIT		1
+ #endif
+@@ -46,13 +48,13 @@
+ #if	SMC_USE_16BIT
+ #define SMC_inb(a, r)			 readb((a) + (r))
+ #define SMC_inw(a, r)			 readw((a) + (r))
+-#define SMC_inl(a, r)			 ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw(a+2, r)<<16))
++#define SMC_inl(a, r)			 ((SMC_inw(a, r) & 0xFFFF)+(SMC_inw((a)+2, r)<<16))
+ #define SMC_outb(v, a, r)		 writeb(v, (a) + (r))
+ #define SMC_outw(v, a, r)		 writew(v, (a) + (r))
+ #define SMC_outl(v, a, r) 			 \
+ 	do{					 \
+-		 writel(v & 0xFFFF, (a) + (r));	 \
+-		 writel(v >> 16, (a) + (r) + 2); \
++		 writel((v) & 0xFFFF, (a) + (r));	 \
++		 writel((v) >> 16, (a) + (r) + 2); \
+ 	 } while (0)
+ #define SMC_insl(a, r, p, l)	 readsw((short*)((a) + (r)), p, l*2)
+ #define SMC_outsl(a, r, p, l)	 writesw((short*)((a) + (r)), p, l*2)