linux-kexecboot: add 2.6.29, currently only supports beagle

1 files changed, 93 insertions, 0 deletions

diff --git a/recipes/kexecboot/linux-kexecboot-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch b/recipes/kexecboot/linux-kexecboot-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch
new file mode 100644
index 0000000000..09fc0a17d0
--- /dev/null
+++ b/recipes/kexecboot/linux-kexecboot-2.6.29/musb/0009-usb-musb_host-fix-ep0-fifo-flushing.patch
@@ -0,0 +1,93 @@
+From 48ce47b15bfd420982ee275c595a9139eb6fabf7 Mon Sep 17 00:00:00 2001
+From: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
+Date: Thu, 26 Mar 2009 17:38:30 -0700
+Subject: [PATCH] usb: musb_host, fix ep0 fifo flushing
+
+The MUSB host side can't share generic TX FIFO flush logic
+with EP0; the EP0 TX status register bits are different
+from those for other entpoints.
+
+Resolve this issue by providing a new EP0-specific routine
+to flush and reset the FIFO, which pays careful attention to
+restrictions listed in the latest programmer's guide.  This
+gets rid of an open issue whereby the usbtest control write
+test (#14) failed.
+
+Signed-off-by: David Brownell <dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
+---
+ drivers/usb/musb/musb_host.c |   38 +++++++++++++++++++++++++-------------
+ 1 files changed, 25 insertions(+), 13 deletions(-)
+
+diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
+index ff09595..a5d75aa 100644
+--- a/drivers/usb/musb/musb_host.c
++++ b/drivers/usb/musb/musb_host.c
+@@ -125,6 +125,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
+ 	}
+ }
+ 
++static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
++{
++	void __iomem	*epio = ep->regs;
++	u16		csr;
++	int		retries = 5;
++
++	/* scrub any data left in the fifo */
++	do {
++		csr = musb_readw(epio, MUSB_TXCSR);
++		if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
++			break;
++		musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
++		csr = musb_readw(epio, MUSB_TXCSR);
++		udelay(10);
++	} while (--retries);
++
++	WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
++			ep->epnum, csr);
++
++	/* and reset for the next transfer */
++	musb_writew(epio, MUSB_TXCSR, 0);
++}
++
+ /*
+  * Start transmit. Caller is responsible for locking shared resources.
+  * musb must be locked.
+@@ -693,11 +716,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
+ 			musb_writew(epio, MUSB_TXCSR, csr);
+ 			csr = musb_readw(epio, MUSB_TXCSR);
+ 		} else {
+-			/* endpoint 0: just flush */
+-			musb_writew(epio, MUSB_CSR0,
+-				csr | MUSB_CSR0_FLUSHFIFO);
+-			musb_writew(epio, MUSB_CSR0,
+-				csr | MUSB_CSR0_FLUSHFIFO);
++			musb_h_ep0_flush_fifo(hw_ep);
+ 		}
+ 
+ 		/* target addr and (for multipoint) hub addr/port */
+@@ -1063,11 +1082,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
+ 			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+ 			musb_writew(epio, MUSB_CSR0, csr);
+ 		} else {
+-			csr |= MUSB_CSR0_FLUSHFIFO;
+-			musb_writew(epio, MUSB_CSR0, csr);
+-			musb_writew(epio, MUSB_CSR0, csr);
+-			csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
+-			musb_writew(epio, MUSB_CSR0, csr);
++			musb_h_ep0_flush_fifo(hw_ep);
+ 		}
+ 
+ 		musb_writeb(epio, MUSB_NAKLIMIT0, 0);
+@@ -1081,9 +1096,6 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
+ 		 * SHOULD NEVER HAPPEN! */
+ 		ERR("no URB for end 0\n");
+ 
+-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+-		musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
+-		musb_writew(epio, MUSB_CSR0, 0);
+ 
+ 		goto done;
+ 	}
+-- 
+1.6.0.4
+