rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

15 files changed, 738 insertions, 0 deletions

diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch
new file mode 100644
index 0000000000..fb55f92868
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.14.patch
@@ -0,0 +1,28 @@
+ ixp400_eth.c |    6 +++++-
+ 1 files changed, 5 insertions(+), 1 deletion(-)
+
+Index: ixp400-eth-1.5.1-r0/ixp400_eth.c
+===================================================================
+--- ixp400-eth-1.5.1-r0.orig/ixp400_eth.c
++++ ixp400-eth-1.5.1-r0/ixp400_eth.c
+@@ -1848,7 +1848,11 @@
+     skb->len -= header_len;
+    
+     /* fill the pkt arrival time (set at the irq callback entry) */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
+     skb->stamp = irq_stamp;
++#else
++    skb_set_timestamp(skb, &irq_stamp);
++#endif
+  
+     /* fill the input device field */
+     skb->dev = dev;
+@@ -3040,7 +3044,7 @@
+ }
+ 
+ /* set port MAC addr and update the dev struct if successfull */
+-int ixp400_dev_set_mac_address(struct net_device *dev, void *addr)
++static int ixp400_dev_set_mac_address(struct net_device *dev, void *addr)
+ {
+     int res;
+     IxEthAccMacAddr npeMacAddr;
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch
new file mode 100644
index 0000000000..83115d8efa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/2.6.15.patch
@@ -0,0 +1,18 @@
+2.6.15 needs platform_device.h
+
+ ixp400_eth.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -65,6 +65,10 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ 
++#ifndef to_platform_device
++#include <linux/platform_device.h>
++#endif
++
+ /*
+  * Intel IXP400 Software specific header files
+  */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch
new file mode 100644
index 0000000000..3bc51f0b66
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/Makefile.patch
@@ -0,0 +1,36 @@
+This is an OpenEmbedded only patch to make the code buildable in
+the OpenEmbedded environment.
+
+--- ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/Makefile	1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,30 @@
++obj-m := ixp400_eth.o
++
++CFLAGS_ixp400_eth.o = -DWall \
++          -I$(IXP4XX_CSR_DIR) \
++          -I$(OSAL_DIR)/ \
++          -I$(OSAL_DIR)/os/linux/include/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/core/ \
++          -I$(OSAL_DIR)/os/linux/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/os/linux/include/core/  \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/os/linux/include/core/ \
++          -I$(OSAL_DIR)/include/ \
++          -I$(OSAL_DIR)/include/modules/ \
++          -I$(OSAL_DIR)/include/modules/bufferMgt/ \
++          -I$(OSAL_DIR)/include/modules/ioMem/ \
++          -I$(OSAL_DIR)/include/modules/core/ \
++          -I$(OSAL_DIR)/include/platforms/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/ \
++          -I$(OSAL_DIR)/include/platforms/ixp400/xp425/ \
++          -I$(OSAL_DIR)/os/linux/include/platforms/ixp400/ixp425/ \
++	  $(IX_CFLAGS)
++
++default:
++	$(MAKE) ARCH=arm CROSS_COMPILE=$(LINUX_CROSS_COMPILE) $(KERNEL_VERBOSE) symverfile=$(IXP4XX_CSR_SYMVERS) -C $(LINUX_SRC) SUBDIRS=$(PWD) modules
++
++clean:
++	rm -f ixp400_eth.ko
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch
new file mode 100644
index 0000000000..8508790fa5
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/continue-if-qmgr-init-fails.patch
@@ -0,0 +1,22 @@
+tries to go on even if queue manager initialization
+fails. this is hand because you'll be allowed to
+insert ixp400_eth immediately after you have removed
+it, without re-inserting ixp400.
+
+ ixp400_eth.c |    5 +----
+ 1 file changed, 1 insertion(+), 4 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2850,10 +2850,7 @@ static int qmgr_init(void)
+     /* Initialise Queue Manager */
+     P_VERBOSE("Initialising Queue Manager...\n");
+     if ((res = ixQMgrInit()))
+-    {
+-	P_ERROR("Error initialising queue manager!\n");
+-	return -1;
+-    }
++	P_ERROR("Error initialising queue manager, trying to continue!\n");
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch
new file mode 100644
index 0000000000..c684c078d2
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch
@@ -0,0 +1,131 @@
+This patch is not necessary but helps when debugging the build
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1350,9 +1350,10 @@ static int dev_media_check_thread (void*
+ 	
+ 	    if (res != IX_ETH_ACC_SUCCESS)
+ 	    {
+-		P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
++		P_WARN("%s: ixEthMiiLinkStatus failed on PHY%d.\n"
+ 		       "\tCan't determine\nthe auto negotiated parameters. "
+ 		       "Using default values.\n",
++		       dev->name,
+ 		       phyNum); 
+ 		/* something is bad, gracefully stops the loop */
+ 		priv->maintenanceCheckStopped = TRUE;
+@@ -2213,7 +2214,8 @@ static int port_enable(struct net_device
+ 	   IX_IEEE803_MAC_ADDRESS_SIZE);
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -2707,8 +2709,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out)))
+ 	    {
+-		P_ERROR("Error reading MII reg %d on phy %d\n",
+-		       data->reg_num, data->phy_id);
++		P_ERROR("%s: Error reading MII reg %d on phy %d\n",
++		       dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -2720,8 +2722,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in)))
+ 	    {
+-		P_ERROR("Error writing MII reg %d on phy %d\n",
+-                        data->reg_num, data->phy_id);
++		P_ERROR("%s: Error writing MII reg %d on phy %d\n",
++                        dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -3049,7 +3051,8 @@ static int set_mac_address(struct net_de
+     /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -3267,6 +3270,8 @@ static int __devinit dev_eth_probe(struc
+ 	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+     if (!priv->maintenanceCheckThreadComplete)
+     {
++	P_ERROR("%s: Failed to allocate maintenance semaphore %d\n",
++		ndev->name, priv->port_id);
+ 	goto error;
+     }
+     priv->lock = SPIN_LOCK_UNLOCKED;
+@@ -3360,7 +3365,11 @@ static int __devinit dev_eth_probe(struc
+ 
+ #if IS_KERNEL26
+     if (register_netdev(ndev))
++    {
++	P_ERROR("%s: Failed to register netdevice %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
++    }
+ #else
+     found_devices++;
+ #endif /* IS_KERNEL26 */
+@@ -3370,6 +3379,8 @@ static int __devinit dev_eth_probe(struc
+     /* register EthAcc callbacks for this port */
+     if (dev_rxtxcallback_register(portId, (UINT32)ndev))
+     {
++    	P_ERROR("%s: Failed to register callback %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
+     }
+ 
+@@ -3393,6 +3404,7 @@ static int __devinit dev_eth_probe(struc
+ 
+ /* Error handling: enter here whenever error detected */
+ error:
++    P_ERROR("%s: dev_eth_probe fails\n", ndev->name);
+     TRACE;
+ 
+ #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED
+@@ -3465,21 +3477,21 @@ static int __devexit dev_eth_remove(int 
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEA))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 
+@@ -3528,6 +3540,9 @@ static int __init ixp400_eth_init(void)
+     TRACE;
+ 
+     P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n");
++#ifdef IX_OSAL_ENSURE_ON
++    ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL);
++#endif
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/device-name.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/device-name.patch
new file mode 100644
index 0000000000..492c9274fd
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/device-name.patch
@@ -0,0 +1,49 @@
+ register the ethernet devices as ethX
+
+ ixp400_eth.c |   12 +++---------
+ 1 files changed, 3 insertions(+), 9 deletions(-)
+
+Index: ixp400-eth-1.5.1-r0/ixp400_eth.c
+===================================================================
+--- ixp400-eth-1.5.1-r0.orig/ixp400_eth.c
++++ ixp400-eth-1.5.1-r0/ixp400_eth.c
+@@ -160,9 +160,6 @@
+ MODULE_PARM(dev_max_count, "i");
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+-/* devices will be called ixp0 and ixp1 */
+-#define DEVICE_NAME "ixp"
+-
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
+ #define PHY_SPEED_10    0
+ #define PHY_SPEED_100   1
+@@ -1579,7 +1576,7 @@
+     if (request_irq(IX_OSAL_IXP400_XSCALE_PMU_IRQ_LVL,
+                     dev_pmu_timer_os_isr,
+                     SA_SHIRQ,
+-                    DEVICE_NAME,
++                    MODULE_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
+         P_ERROR("Failed to reassign irq to PMU timer interrupt!\n");
+@@ -3035,8 +3032,8 @@
+ 	if (port_id == IX_ETH_PORT_2) npe_id = "C";
+ 	if (port_id == IX_ETH_PORT_3) npe_id = "A";
+ 
+-	P_INFO("%s%d is using NPE%s and the PHY at address %d\n",
+-	       DEVICE_NAME, port_id, npe_id, phyAddresses[port_id]);
++	P_INFO("ethernet %d is using NPE%s and the PHY at address %d\n",
++	       dev_count, npe_id, phyAddresses[port_id]);
+ 
+ 	/* Set the MAC to the same duplex mode as the phy */
+ 	ixEthAccPortDuplexModeSet(port_id,
+@@ -3244,9 +3241,6 @@
+     /* set the private port ID */
+     priv->port_id  = portId;
+ 
+-    /* set device name */
+-    sprintf(ndev->name, DEVICE_NAME"%d", priv->port_id);
+-
+     TRACE;
+ 
+     /* initialize RX pool */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/int-random.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/int-random.patch
new file mode 100644
index 0000000000..fede9daf90
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/int-random.patch
@@ -0,0 +1,16 @@
+use the ethernet device interrupts to gather entropy
+
+ ixp400_eth.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2864,7 +2864,7 @@ static int qmgr_init(void)
+ 
+     if (request_irq(IX_OSAL_IXP400_QM1_IRQ_LVL,
+                     dev_qmgr_os_isr,
+-                    SA_SHIRQ,
++                    SA_SHIRQ | SA_SAMPLE_RANDOM,
+                     MODULE_NAME,
+                     (void *)IRQ_ANY_PARAMETER))
+     {
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/le.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/le.patch
new file mode 100644
index 0000000000..3d569015e6
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/le.patch
@@ -0,0 +1,41 @@
+little endian support
+
+ ixp400_eth.c |   20 ++++++++++++++++++++
+ 1 file changed, 20 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -2040,6 +2040,16 @@ static void rx_cb(UINT32 callbackTag, IX
+ 	skb->tail = skb->data + len;
+ 	skb->len = len;
+ 	
++#ifndef __ARMEB__
++	{
++	    /* Byte swap all words containing data from the buffer. */
++	    unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	    unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	    while (p < e)
++		*p = ntohl(*p), ++p;
++	}
++#endif
++
+ #ifdef DEBUG_DUMP
+ 	skb_dump("rx", skb);
+ #endif
+@@ -2431,6 +2441,16 @@ static int dev_hard_start_xmit(struct sk
+ 	return 0;
+     }
+ 
++#ifndef __ARMEB__
++    {
++	/* Byte swap all words containing data from the buffer. */
++	unsigned long *p = (unsigned long*)((unsigned)skb->data & ~0x3);
++	unsigned long *e = (unsigned long*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++	while (p < e)
++	    *p = ntohl(*p), ++p;
++    }
++#endif
++
+ #ifdef DEBUG_DUMP
+     skb_dump("tx", skb);
+ #endif
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch
new file mode 100644
index 0000000000..e23eaf5f2b
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/mac-address.patch
@@ -0,0 +1,123 @@
+Patch to use maclist - get the MAC to use from the board level
+MAC repository based on the device portId.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -23,10 +23,10 @@
+  * This driver is written and optimized for Intel Xscale technology.
+  *
+  * SETUP NOTES:
+- * By default, this driver uses predefined MAC addresses.
+- * These are set in global var 'default_mac_addr' in this file.
+- * If required, these can be changed at run-time using
+- * the 'ifconfig' tool.
++ * By default, this driver uses MAC addresses from maclist, if
++ * these are not available the kernel api to randomly generate
++ * a locally assigned MAC address is used.  The MAC can be
++ * overridden with ifconfig if absolutely necessary.
+  *
+  * Example - to set ixp0 MAC address to 00:02:B3:66:88:AA, 
+  * run ifconfig with the following arguments:
+@@ -64,6 +64,7 @@
+ #include <linux/sysctl.h>
+ #include <linux/unistd.h>
+ #include <linux/version.h>
++#include <net/maclist.h>
+ 
+ #if KERNEL_VERSION(2,6,0) <= LINUX_VERSION_CODE
+ #include <linux/workqueue.h>
+@@ -130,6 +131,8 @@ static int dev_max_count = 1; /* only NP
+ static int dev_max_count = 2; /* only NPEB and NPEC */
+ #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+ static int dev_max_count = 3; /* all NPEs are used */
++#else
++static int dev_max_count = -1;/* use maclist_count */
+ #endif
+ 
+ #ifndef CONFIG_IXP400_NAPI
+@@ -614,21 +617,6 @@ static phy_cfg_t default_phy_cfg[] =
+ #endif
+ };
+ 
+-/* Default MAC addresses for EthAcc Ports 1 and 2 (using Intel MAC prefix) 
+- * Default is 
+- *   IX_ETH_PORT_1 -> MAC 00:02:b3:01:01:01
+- *   IX_ETH_PORT_2 -> MAC 00:02:b3:02:02:02
+- *   IX_ETH_PORT_3 -> MAC 00:02:b3:03:03:03
+-*/
+-static IxEthAccMacAddr default_mac_addr[] =
+-{
+-    {{0x00, 0x02, 0xB3, 0x01, 0x01, 0x01}}  /* EthAcc Port 0 */
+-    ,{{0x00, 0x02, 0xB3, 0x02, 0x02, 0x02}} /* EthAcc Port 1 */
+-#if defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+-    ,{{0x00, 0x02, 0xB3, 0x03, 0x03, 0x03}} /* EthAcc Port 2 */
+-#endif
+-};
+-
+ /* Default mapping of  NpeImageIds for EthAcc Ports 
+  * Default is 
+  *   IX_ETH_PORT_1 -> IX_ETH_NPE_B
+@@ -3325,28 +3313,10 @@ static int __devinit dev_eth_probe(struc
+ 
+     /* Defines the unicast MAC address
+      *
+-     * Here is a good place to read a board-specific MAC address
+-     * from a non-volatile memory, e.g. an external eeprom.
+-     * 
+-     * This memcpy uses a default MAC address from this
+-     * source code.
+-     *
+-     * This can be overriden later by the (optional) command
+-     *
+-     *     ifconfig ixp0 ether 0002b3010101
+-     *
++     * The code reads from the maclist API.
+      */
+-
+-    memcpy(ndev->dev_addr, 
+-	   &default_mac_addr[priv->port_id].macAddress,
+-	   IX_IEEE803_MAC_ADDRESS_SIZE);
+-
+-    /* possibly remove this test and the message when a valid MAC address 
+-     * is not hardcoded in the driver source code. 
+-     */
+-    if (is_valid_ether_addr(ndev->dev_addr))
+-    {
+-	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++    maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id);
++    P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
+ 	       (unsigned)ndev->dev_addr[0],
+ 	       (unsigned)ndev->dev_addr[1],
+ 	       (unsigned)ndev->dev_addr[2],
+@@ -3354,7 +3324,6 @@ static int __devinit dev_eth_probe(struc
+ 	       (unsigned)ndev->dev_addr[4],
+ 	       (unsigned)ndev->dev_addr[5],
+ 	       priv->port_id);
+-    }
+     
+     /* Set/update the internal packet size 
+      * This can be overriden later by the command
+@@ -3562,12 +3531,15 @@ static int __init ixp400_eth_init(void)
+ 
+     TRACE;
+ 
+-    /* check module parameter range */
+-    if (dev_max_count == 0 || dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
+-    {
+-	P_ERROR("Number of ports supported is dev_max_count <= %d\n", IX_ETH_ACC_NUMBER_OF_PORTS);
+-	return -1;
+-    }
++    /* fix dev_max_count to maclist_count - the actual number of
++     * available MACs
++     */
++    if (dev_max_count <= 0 || (dev_max_count > maclist_count() && maclist_count() > 0))
++	    dev_max_count = maclist_count();
++    if (dev_max_count <= 0)
++	    dev_max_count = 1;
++    else if (dev_max_count > IX_ETH_ACC_NUMBER_OF_PORTS)
++	    dev_max_count = IX_ETH_ACC_NUMBER_OF_PORTS;
+ 
+     TRACE;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf b/recipes/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf
new file mode 100644
index 0000000000..f08b9a404c
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/modprobe.conf
@@ -0,0 +1,4 @@
+# Add an alias for eth0 to ixp400_eth to cause the S40networking
+# init script to load the ixp400_eth driver on the first boot
+alias eth0 ixp400_eth
+options ixp400_eth dev_max_count=1
\ No newline at end of file
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/module-param.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/module-param.patch
new file mode 100644
index 0000000000..c54c45d716
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/module-param.patch
@@ -0,0 +1,62 @@
+ ixp400_eth.c |   32 ++++++++++++++++++++++++++++++++
+ 1 files changed, 32 insertions(+)
+
+Index: ixp400_eth/ixp400_eth.c
+===================================================================
+--- ixp400_eth.orig/ixp400_eth.c
++++ ixp400_eth/ixp400_eth.c
+@@ -142,22 +142,54 @@
+ 
+ static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+ 
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(ixp400_netdev_max_backlog, "i");
++#else
++module_param(ixp400_netdev_max_backlog, int, 0644);
++#endif
+ MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(datapath_poll, "i");
++#else
++module_param(datapath_poll, int, 0644);
++#endif
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+ #endif /* CONFIG_IXP400_NAPI */
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(npe_learning, "i");
++#else
++module_param(npe_learning, int, 0644);
++#endif
+ MODULE_PARM_DESC(npe_learning, "If non-zero, NPE MAC Address Learning & Filtering feature will be enabled");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(log_level, "i");
++#else
++module_param(log_level, int, 0644);
++#endif
+ MODULE_PARM_DESC(log_level, "Set log level: 0 - None, 1 - Verbose, 2 - Debug");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(no_ixp400_sw_init, "i");
++#else
++module_param(no_ixp400_sw_init, int, 0644);
++#endif
+ MODULE_PARM_DESC(no_ixp400_sw_init, "If non-zero, do not initialise Intel IXP400 Software Release core components");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(no_phy_scan, "i");
++#else
++module_param(no_phy_scan, int, 0644);
++#endif
+ MODULE_PARM_DESC(no_phy_scan, "If non-zero, use hard-coded phy addresses");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(phy_reset, "i");
++#else
++module_param(phy_reset, int, 0644);
++#endif
+ MODULE_PARM_DESC(phy_reset, "If non-zero, reset the phys");
++#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,16)
+ MODULE_PARM(dev_max_count, "i");
++#else
++module_param(dev_max_count, int, 0644);
++#endif
+ MODULE_PARM_DESC(dev_max_count, "Number of devices to initialize");
+ 
+ /* boolean values for PHY link speed, duplex, and autonegotiation */
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch
new file mode 100644
index 0000000000..6891b6b4a9
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/netdev_max_backlog.patch
@@ -0,0 +1,54 @@
+--- ixp400_eth/ixp400_eth.c~	2006-01-09 01:03:11.000000000 +1030
++++ ixp400_eth/ixp400_eth.c	2006-01-09 01:05:27.000000000 +1030
+@@ -139,12 +139,12 @@
+  * skbuf to push into the linux stack, and avoid the performance degradations 
+  * during overflow.
+  */
+-static int netdev_max_backlog = 290;
++static int ixp400_netdev_max_backlog = 290;
+ 
+ static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+ 
+-MODULE_PARM(netdev_max_backlog, "i");
+-MODULE_PARM_DESC(netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
++MODULE_PARM(ixp400_netdev_max_backlog, "i");
++MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+ MODULE_PARM(datapath_poll, "i");
+ MODULE_PARM_DESC(datapath_poll, "If non-zero, use polling method for datapath instead of interrupts");
+ #endif /* CONFIG_IXP400_NAPI */
+@@ -213,7 +213,7 @@
+  * high traffic rates. To measure the maximum throughput between the
+  * ports of the driver,
+  * - Modify /proc/sys/net/core/netdev_max_backlog value in the kernel 
+- * - Adjust netdev_max_backlog=n in the driver's command line
++ * - Adjust ixp400_netdev_max_backlog=n in the driver's command line
+  * in order to get the best rates depending on the testing tool 
+  * and the OS load.
+  *
+@@ -1997,7 +1997,7 @@
+     /* check if the system accepts more traffic and
+      * against chained mbufs 
+      */
+-    if ((qlevel < netdev_max_backlog)
++    if ((qlevel < ixp400_netdev_max_backlog)
+         && (IX_OSAL_MBUF_NEXT_PKT_IN_CHAIN_PTR(mbuf) == NULL))
+ #else
+     /* check against chained mbufs
+@@ -3776,13 +3776,13 @@
+ #ifndef CONFIG_IXP400_NAPI
+     /* set the softirq rx queue thresholds 
+      * (These numbers are based on tuning experiments)
+-     * maxbacklog =  (netdev_max_backlog * 10) / 63;
++     * maxbacklog =  (ixp400_netdev_max_backlog * 10) / 63;
+     */
+-    if (netdev_max_backlog == 0)
++    if (ixp400_netdev_max_backlog == 0)
+     {
+-	netdev_max_backlog = 290; /* system default */
++	ixp400_netdev_max_backlog = 290; /* system default */
+     }
+-    netdev_max_backlog /= BACKLOG_TUNE;
++    ixp400_netdev_max_backlog /= BACKLOG_TUNE;
+ 
+     TRACE;
+ #endif
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/params.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/params.patch
new file mode 100644
index 0000000000..86011deaaa
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/params.patch
@@ -0,0 +1,75 @@
+*** ixp/ixp400_eth.c.orig	Wed Jun  7 21:31:59 2006
+--- ixp/ixp400_eth.c	Fri Jun  9 14:55:18 2006
+***************
+*** 112,135 ****
+  #define MOD_VERSION "1.5"
+  
+  /* Module parameters */
+! static int npe_learning = 1;      /* default : NPE learning & filtering enable */
+! static int log_level = 0;         /* default : no log */
+! static int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
+! static int no_phy_scan = 0;       /* default : do phy discovery */
+! static int phy_reset = 0;         /* default : mo phy reset */
+  
+  /* maximum number of ports supported by this driver ixp0, ixp1 ....
+   * The default is to configure all ports defined in EthAcc component
+  */
+  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
+! static int dev_max_count = 1; /* only NPEC is used */
+! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
+! static int dev_max_count = 1; /* only NPEB is used */
+  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
+        || defined (CONFIG_ARCH_ADI_COYOTE)
+! static int dev_max_count = 2; /* only NPEB and NPEC */
+  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+! static int dev_max_count = 3; /* all NPEs are used */
+  #endif
+  
+  #ifndef CONFIG_IXP400_NAPI
+--- 112,136 ----
+  #define MOD_VERSION "1.5"
+  
+  /* Module parameters */
+! /* gcc 4.1.1+kernel2.6.16 do not like it if these are static! */
+! int npe_learning = 1;      /* default : NPE learning & filtering enable */
+! int log_level = 0;         /* default : no log */
+! int no_ixp400_sw_init = 0; /* default : init core components of the IXP400 Software */
+! int no_phy_scan = 0;       /* default : do phy discovery */
+! int phy_reset = 0;         /* default : mo phy reset */
+  
+  /* maximum number of ports supported by this driver ixp0, ixp1 ....
+   * The default is to configure all ports defined in EthAcc component
+  */
+  #ifdef CONFIG_IXP400_ETH_NPEC_ONLY
+! int dev_max_count = 1; /* only NPEC is used */
+! #elif defined (CONFIG_IXP400_ETH_NPEB_ONLY)
+! int dev_max_count = 1; /* only NPEB is used */
+  #elif defined (CONFIG_ARCH_IXDP425) || defined(CONFIG_ARCH_IXDPG425)\
+        || defined (CONFIG_ARCH_ADI_COYOTE)
+! int dev_max_count = 2; /* only NPEB and NPEC */
+  #elif defined (CONFIG_ARCH_IXDP465) || defined(CONFIG_MACH_IXDP465)
+! int dev_max_count = 3; /* all NPEs are used */
+  #endif
+  
+  #ifndef CONFIG_IXP400_NAPI
+***************
+*** 138,146 ****
+   * skbuf to push into the linux stack, and avoid the performance degradations 
+   * during overflow.
+   */
+! static int ixp400_netdev_max_backlog = 290;
+  
+! static int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+  
+  MODULE_PARM(ixp400_netdev_max_backlog, "i");
+  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
+--- 139,147 ----
+   * skbuf to push into the linux stack, and avoid the performance degradations 
+   * during overflow.
+   */
+! int ixp400_netdev_max_backlog = 290;
+  
+! int datapath_poll = 1;     /* default : rx/tx polling, not interrupt driven*/
+  
+  MODULE_PARM(ixp400_netdev_max_backlog, "i");
+  MODULE_PARM_DESC(ixp400_netdev_max_backlog, "Should be set to the value of /proc/sys/net/core/netdev_max_backlog (perf affecting)");
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch
new file mode 100644
index 0000000000..64fb310ee5
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/poll-controller.patch
@@ -0,0 +1,50 @@
+poll controller support
+
+ ixp400_eth.c |   22 ++++++++++++++++++++++
+ 1 file changed, 22 insertions(+)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -348,6 +348,12 @@ static int dev_pmu_timer_init(void);
+ extern void 
+ ixEthTxFrameDoneQMCallback(IxQMgrQId qId, IxQMgrCallbackId callbackId);
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/* poll controller (needed for netconsole et al) */
++static void
++ixp425eth_poll_controller(struct net_device *dev);
++#endif
++
+ /* Private device data */
+ typedef struct {
+     spinlock_t lock;  /* multicast management lock */
+@@ -3060,6 +3066,19 @@ static int set_mac_address(struct net_de
+     return 0;
+ }
+ 
++#ifdef CONFIG_NET_POLL_CONTROLLER
++/*
++ * Polling receive - used by netconsole and other diagnostic tools
++ * to allow network i/o with interrupts disabled.
++ * (stolen from 8139too.c by siddy)
++ */
++static void ixp425eth_poll_controller(struct net_device *dev)
++{
++        disable_irq(dev->irq);
++        dev_qmgr_os_isr(dev->irq, dev, NULL);
++        enable_irq(dev->irq);
++}
++#endif
+ 
+ /* 
+  *  TX QDISC
+@@ -3270,6 +3289,9 @@ static int __devinit dev_eth_probe(struc
+     ndev->get_stats = dev_get_stats;
+     ndev->set_multicast_list = dev_set_multicast_list;
+     ndev->flags |= IFF_MULTICAST;
++#ifdef CONFIG_NET_POLL_CONTROLLER
++    ndev->poll_controller = ixp425eth_poll_controller;
++#endif
+ 
+     ndev->set_mac_address = set_mac_address;
+ 
diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch
new file mode 100644
index 0000000000..2ddc98938a
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/stop-on-rmmod.patch
@@ -0,0 +1,29 @@
+devices must be explicitely stopped when
+the driver is going do be removed, otherwise
+it will simply hang.
+
+ ixp400_eth.c |   13 ++++++++++---
+ 1 file changed, 10 insertions(+), 3 deletions(-)
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -3800,9 +3800,16 @@ void __exit ixp400_eth_exit(void)
+ 
+     TRACE;
+ 
+-    /* We can only get here when the module use count is 0,
+-     * so there's no need to stop devices.
+-     */
++    /* stop devices */
++
++#if IS_KERNEL26
++    for (dev_count = 0;
++	 dev_count < dev_max_count;  /* module parameter */
++	 dev_count++)
++    {
++	do_dev_stop(platform_get_drvdata(&ixp400_eth_devices[dev_count]));
++    }
++#endif
+ 
+     if (no_ixp400_sw_init == 0) /* module parameter */
+     {