rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

1 files changed, 131 insertions, 0 deletions

diff --git a/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch b/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch
new file mode 100644
index 0000000000..c684c078d2
--- /dev/null
+++ b/recipes/ixp425-eth/ixp400-eth-1.5.1/debug.patch
@@ -0,0 +1,131 @@
+This patch is not necessary but helps when debugging the build
+
+--- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
++++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
+@@ -1350,9 +1350,10 @@ static int dev_media_check_thread (void*
+ 	
+ 	    if (res != IX_ETH_ACC_SUCCESS)
+ 	    {
+-		P_WARN("ixEthMiiLinkStatus failed on PHY%d.\n"
++		P_WARN("%s: ixEthMiiLinkStatus failed on PHY%d.\n"
+ 		       "\tCan't determine\nthe auto negotiated parameters. "
+ 		       "Using default values.\n",
++		       dev->name,
+ 		       phyNum); 
+ 		/* something is bad, gracefully stops the loop */
+ 		priv->maintenanceCheckStopped = TRUE;
+@@ -2213,7 +2214,8 @@ static int port_enable(struct net_device
+ 	   IX_IEEE803_MAC_ADDRESS_SIZE);
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -2707,8 +2709,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiReadRtn (data->phy_id, data->reg_num, &data->val_out)))
+ 	    {
+-		P_ERROR("Error reading MII reg %d on phy %d\n",
+-		       data->reg_num, data->phy_id);
++		P_ERROR("%s: Error reading MII reg %d on phy %d\n",
++		       dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -2720,8 +2722,8 @@ static int do_dev_ioctl(struct net_devic
+ 	    down (miiAccessMutex);     /* lock the MII register access mutex */
+ 	    if ((res = ixEthAccMiiWriteRtn (data->phy_id, data->reg_num, data->val_in)))
+ 	    {
+-		P_ERROR("Error writing MII reg %d on phy %d\n",
+-                        data->reg_num, data->phy_id);
++		P_ERROR("%s: Error writing MII reg %d on phy %d\n",
++                        dev->name, data->reg_num, data->phy_id);
+ 		res = -1;
+ 	    }
+ 	    up (miiAccessMutex);	/* release the MII register access mutex */
+@@ -3049,7 +3051,8 @@ static int set_mac_address(struct net_de
+     /* Set MAC addr in h/w (ethAcc checks for MAC address to be valid) */
+     if ((res = ixEthAccPortUnicastMacAddressSet(priv->port_id, &npeMacAddr)))
+     {
+-        P_VERBOSE("Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++        P_VERBOSE("%s: Failed to set MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++	       dev->name,
+ 	       (unsigned)npeMacAddr.macAddress[0],
+ 	       (unsigned)npeMacAddr.macAddress[1],
+ 	       (unsigned)npeMacAddr.macAddress[2],
+@@ -3267,6 +3270,8 @@ static int __devinit dev_eth_probe(struc
+ 	kmalloc(sizeof(struct semaphore), GFP_KERNEL);
+     if (!priv->maintenanceCheckThreadComplete)
+     {
++	P_ERROR("%s: Failed to allocate maintenance semaphore %d\n",
++		ndev->name, priv->port_id);
+ 	goto error;
+     }
+     priv->lock = SPIN_LOCK_UNLOCKED;
+@@ -3360,7 +3365,11 @@ static int __devinit dev_eth_probe(struc
+ 
+ #if IS_KERNEL26
+     if (register_netdev(ndev))
++    {
++	P_ERROR("%s: Failed to register netdevice %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
++    }
+ #else
+     found_devices++;
+ #endif /* IS_KERNEL26 */
+@@ -3370,6 +3379,8 @@ static int __devinit dev_eth_probe(struc
+     /* register EthAcc callbacks for this port */
+     if (dev_rxtxcallback_register(portId, (UINT32)ndev))
+     {
++    	P_ERROR("%s: Failed to register callback %d\n",
++		ndev->name, priv->port_id);
+     	goto error;
+     }
+ 
+@@ -3393,6 +3404,7 @@ static int __devinit dev_eth_probe(struc
+ 
+ /* Error handling: enter here whenever error detected */
+ error:
++    P_ERROR("%s: dev_eth_probe fails\n", ndev->name);
+     TRACE;
+ 
+ #ifdef CONFIG_IXP400_ETH_QDISC_ENABLED
+@@ -3465,21 +3477,21 @@ static int __devexit dev_eth_remove(int 
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEA))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_B_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEB))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 	if (default_npeImageId[portId] == IX_ETH_NPE_C_IMAGE_ID)
+ 	{
+ 	    if (IX_SUCCESS != ixNpeDlNpeStopAndReset(IX_NPEDL_NPEID_NPEC))
+ 	    {
+-		P_NOTICE("Error Halting NPE for Ethernet port %d!\n", portId);
++		P_NOTICE("%s: Error Halting NPE for Ethernet port %d!\n", ndev->name, portId);
+ 	    }
+ 	}
+ 
+@@ -3528,6 +3540,9 @@ static int __init ixp400_eth_init(void)
+     TRACE;
+ 
+     P_INFO("Initializing IXP400 NPE Ethernet driver software v. " MOD_VERSION " \n");
++#ifdef IX_OSAL_ENSURE_ON
++    ixOsalLogLevelSet(IX_OSAL_LOG_LVL_ALL);
++#endif
+ 
+     TRACE;
+