rename packages/ to recipes/ per earlier agreement

See links below for more details:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21326
http://thread.gmane.org/gmane.comp.handhelds.openembedded/21816

Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Acked-by: Mike Westerhof <mwester@dls.net>
Acked-by: Philip Balister <philip@balister.org>
Acked-by: Khem Raj <raj.khem@gmail.com>
Acked-by: Marcin Juszkiewicz <hrw@openembedded.org>
Acked-by: Koen Kooi <koen@openembedded.org>
Acked-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>

6 files changed, 385 insertions, 0 deletions

diff --git a/recipes/irda-utils/files/init b/recipes/irda-utils/files/init
new file mode 100755
index 0000000000..a00596fc85
--- /dev/null
+++ b/recipes/irda-utils/files/init
@@ -0,0 +1,77 @@
+#! /bin/sh
+
+NAME="irattach"
+
+module_id() {
+	awk 'BEGIN { FS=": " } /Hardware/ { print $2 } ' </proc/cpuinfo
+}
+cpuid_id() {
+	awk '/Processor/ { print $3; exit; }' /proc/cpuinfo
+}
+
+if [ ! -f /etc/sysconfig/irda ]; then
+
+    case `cpuid_id` in
+	"XScale-PXA2"*)
+	    IRDA=yes
+	    DEVICE=/dev/ttyS2
+	    DONGLE=
+	    DISCOVERY=
+	    ;;
+	*)
+	    IRDA=no
+	    DEVICE=/dev/null
+	    DONGLE=
+	    DISCOVERY=
+	    ;;
+    esac
+
+    mkdir -p /etc/sysconfig
+    echo "IRDA=$IRDA" > /etc/sysconfig/irda
+    if [ $IRDA = "yes" ]; then
+	echo "DEVICE=$DEVICE" >> /etc/sysconfig/irda
+	echo "DONGLE=$DONGLE" >> /etc/sysconfig/irda
+	echo "DISCOVERY=$DISCOVERY" >> /etc/sysconfig/irda
+    fi
+fi
+
+. /etc/sysconfig/irda
+
+# Check if irda is present.
+[ $IRDA = "no" ] && exit 0
+
+[ -f /usr/sbin/irattach ] || exit 0
+
+ARGS=
+if [ $DONGLE ]; then
+	ARGS="$ARGS -d $DONGLE"
+fi
+if [ "$DISCOVERY" = "yes" ];then
+	ARGS="$ARGS -s"
+fi
+
+case "$1" in
+  start)
+	echo -n "Starting IrDA: "
+	irattach ${DEVICE} ${ARGS} > /dev/null 2>&1
+	echo "$NAME."
+	;;
+  stop)
+	echo -n "Stopping IrDA: "
+	killall irattach > /dev/null 2>&1
+	echo "$NAME."
+	;;
+  restart|force-reload)
+	echo -n "Restarting IrDA: "
+	irattach ${DEVICE} ${ARGS} > /dev/null 2>&1
+	sleep 1
+	killall irattach > /dev/null 2>&1
+	echo "$NAME."
+	;;
+  *)
+	N=/etc/init.d/$NAME
+	echo "Usage: $N {start|stop|restart|force-reload}" >&2
+	exit 1
+	;;
+esac
+
diff --git a/recipes/irda-utils/irda-utils/configure.patch b/recipes/irda-utils/irda-utils/configure.patch
new file mode 100644
index 0000000000..a36afe2188
--- /dev/null
+++ b/recipes/irda-utils/irda-utils/configure.patch
@@ -0,0 +1,25 @@
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- irda-utils-0.9.15/./irdadump/configure.in~configure
++++ irda-utils-0.9.15/./irdadump/configure.in
+@@ -1,5 +1,6 @@
+ dnl Process this file with autoconf to produce a configure script.
+-AC_INIT(configure.in)
++AC_INIT
++AC_CONFIG_SRCDIR([configure.in])
+ AM_INIT_AUTOMAKE(libirdadump, 0.1)
+ AM_CONFIG_HEADER(config.h)
+ 
+@@ -18,7 +19,8 @@
+ 
+ dnl Checks for library functions.
+ 
+-AC_OUTPUT([
++AC_CONFIG_FILES([
+ Makefile 
+ src/Makefile
+ shell/Makefile])
++AC_OUTPUT
diff --git a/recipes/irda-utils/irda-utils/m4.patch b/recipes/irda-utils/irda-utils/m4.patch
new file mode 100644
index 0000000000..9c077bb24b
--- /dev/null
+++ b/recipes/irda-utils/irda-utils/m4.patch
@@ -0,0 +1,204 @@
+
+#
+# Patch managed by http://www.mn-logistik.de/unsupported/pxa250/patcher
+#
+
+--- /dev/null
++++ irda-utils-0.9.15/irdadump/m4/glib.m4
+@@ -0,0 +1,196 @@
++# Configure paths for GLIB
++# Owen Taylor     97-11-3
++
++dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
++dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
++dnl gthread is specified in MODULES, pass to glib-config
++dnl
++AC_DEFUN(AM_PATH_GLIB,
++[dnl 
++dnl Get the cflags and libraries from the glib-config script
++dnl
++AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
++            glib_config_prefix="$withval", glib_config_prefix="")
++AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
++            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
++AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
++		    , enable_glibtest=yes)
++
++  if test x$glib_config_exec_prefix != x ; then
++     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
++     if test x${GLIB_CONFIG+set} != xset ; then
++        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
++     fi
++  fi
++  if test x$glib_config_prefix != x ; then
++     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
++     if test x${GLIB_CONFIG+set} != xset ; then
++        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
++     fi
++  fi
++
++  for module in . $4
++  do
++      case "$module" in
++         gmodule) 
++             glib_config_args="$glib_config_args gmodule"
++         ;;
++         gthread) 
++             glib_config_args="$glib_config_args gthread"
++         ;;
++      esac
++  done
++
++  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
++  min_glib_version=ifelse([$1], ,0.99.7,$1)
++  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
++  no_glib=""
++  if test "$GLIB_CONFIG" = "no" ; then
++    no_glib=yes
++  else
++    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
++    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
++    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
++           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
++    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
++           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
++    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
++           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
++    if test "x$enable_glibtest" = "xyes" ; then
++      ac_save_CFLAGS="$CFLAGS"
++      ac_save_LIBS="$LIBS"
++      CFLAGS="$CFLAGS $GLIB_CFLAGS"
++      LIBS="$GLIB_LIBS $LIBS"
++dnl
++dnl Now check if the installed GLIB is sufficiently new. (Also sanity
++dnl checks the results of glib-config to some extent
++dnl
++      rm -f conf.glibtest
++      AC_TRY_RUN([
++#include <glib.h>
++#include <stdio.h>
++#include <stdlib.h>
++
++int 
++main ()
++{
++  int major, minor, micro;
++  char *tmp_version;
++
++  system ("touch conf.glibtest");
++
++  /* HP/UX 9 (%@#!) writes to sscanf strings */
++  tmp_version = g_strdup("$min_glib_version");
++  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
++     printf("%s, bad version string\n", "$min_glib_version");
++     exit(1);
++   }
++
++  if ((glib_major_version != $glib_config_major_version) ||
++      (glib_minor_version != $glib_config_minor_version) ||
++      (glib_micro_version != $glib_config_micro_version))
++    {
++      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
++             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
++             glib_major_version, glib_minor_version, glib_micro_version);
++      printf ("*** was found! If glib-config was correct, then it is best\n");
++      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
++      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
++      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
++      printf("*** required on your system.\n");
++      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
++      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
++      printf("*** before re-running configure\n");
++    } 
++  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
++	   (glib_minor_version != GLIB_MINOR_VERSION) ||
++           (glib_micro_version != GLIB_MICRO_VERSION))
++    {
++      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
++	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
++      printf("*** library (version %d.%d.%d)\n",
++	     glib_major_version, glib_minor_version, glib_micro_version);
++    }
++  else
++    {
++      if ((glib_major_version > major) ||
++        ((glib_major_version == major) && (glib_minor_version > minor)) ||
++        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
++      {
++        return 0;
++       }
++     else
++      {
++        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
++               glib_major_version, glib_minor_version, glib_micro_version);
++        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
++	       major, minor, micro);
++        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
++        printf("***\n");
++        printf("*** If you have already installed a sufficiently new version, this error\n");
++        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
++        printf("*** being found. The easiest way to fix this is to remove the old version\n");
++        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
++        printf("*** correct copy of glib-config. (In this case, you will have to\n");
++        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
++        printf("*** so that the correct libraries are found at run-time))\n");
++      }
++    }
++  return 1;
++}
++],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
++       CFLAGS="$ac_save_CFLAGS"
++       LIBS="$ac_save_LIBS"
++     fi
++  fi
++  if test "x$no_glib" = x ; then
++     AC_MSG_RESULT(yes)
++     ifelse([$2], , :, [$2])     
++  else
++     AC_MSG_RESULT(no)
++     if test "$GLIB_CONFIG" = "no" ; then
++       echo "*** The glib-config script installed by GLIB could not be found"
++       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
++       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
++       echo "*** full path to glib-config."
++     else
++       if test -f conf.glibtest ; then
++        :
++       else
++          echo "*** Could not run GLIB test program, checking why..."
++          CFLAGS="$CFLAGS $GLIB_CFLAGS"
++          LIBS="$LIBS $GLIB_LIBS"
++          AC_TRY_LINK([
++#include <glib.h>
++#include <stdio.h>
++],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
++        [ echo "*** The test program compiled, but did not run. This usually means"
++          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
++          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
++          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
++          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
++          echo "*** is required on your system"
++	  echo "***"
++          echo "*** If you have an old version installed, it is best to remove it, although"
++          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
++          echo "***"
++          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
++          echo "*** came with the system with the command"
++          echo "***"
++          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
++        [ echo "*** The test program failed to compile or link. See the file config.log for the"
++          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
++          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
++          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
++          CFLAGS="$ac_save_CFLAGS"
++          LIBS="$ac_save_LIBS"
++       fi
++     fi
++     GLIB_CFLAGS=""
++     GLIB_LIBS=""
++     ifelse([$3], , :, [$3])
++  fi
++  AC_SUBST(GLIB_CFLAGS)
++  AC_SUBST(GLIB_LIBS)
++  rm -f conf.glibtest
++])
diff --git a/recipes/irda-utils/irda-utils_0.9.15.bb b/recipes/irda-utils/irda-utils_0.9.15.bb
new file mode 100644
index 0000000000..1f904e58a8
--- /dev/null
+++ b/recipes/irda-utils/irda-utils_0.9.15.bb
@@ -0,0 +1,25 @@
+SECTION = "base"
+DESCRIPTION = "Provides common files needed to use IrDA. \
+IrDA allows communication over Infrared with other devices \
+such as phones and laptops."
+LICENSE = "GPL"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/irda/irda-utils-${PV}.tar.gz \
+	   file://configure.patch;patch=1 \
+	   file://m4.patch;patch=1"
+
+export SYS_INCLUDES="-I${STAGING_INCDIR}"
+BROKEN = "1"
+
+inherit autotools
+
+do_compile () {
+	oe_runmake -e -C irattach
+	oe_runmake -e -C irdaping
+}
+
+do_install () {
+	install -d ${D}${sbindir}
+	oe_runmake -C irattach ROOT="${D}" install
+	oe_runmake -C irdaping ROOT="${D}" install
+}
diff --git a/recipes/irda-utils/irda-utils_0.9.16.bb b/recipes/irda-utils/irda-utils_0.9.16.bb
new file mode 100644
index 0000000000..19bcdf397c
--- /dev/null
+++ b/recipes/irda-utils/irda-utils_0.9.16.bb
@@ -0,0 +1,32 @@
+DESCRIPTION = "Provides common files needed to use IrDA. \
+IrDA allows communication over Infrared with other devices \
+such as phones and laptops."
+SECTION = "base"
+LICENSE = "GPL"
+PR = "r8"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/irda/irda-utils-${PV}.tar.gz \
+	   file://configure.patch;patch=1 \
+	   file://m4.patch;patch=1 \
+	   file://init"
+
+export SYS_INCLUDES="-I${STAGING_INCDIR}"
+
+inherit autotools
+
+INITSCRIPT_NAME = "irattach"
+INITSCRIPT_PARAMS = "defaults 20"
+
+do_compile () {
+	oe_runmake -e -C irattach
+	oe_runmake -e -C irdaping
+}
+
+do_install () {
+	install -d ${D}${sbindir}
+	oe_runmake -C irattach ROOT="${D}" install
+	oe_runmake -C irdaping ROOT="${D}" install
+
+	install -d ${D}${sysconfdir}/init.d
+	install -m 0755 ${WORKDIR}/init ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME}
+}
diff --git a/recipes/irda-utils/irdadump_0.9.16.bb b/recipes/irda-utils/irdadump_0.9.16.bb
new file mode 100644
index 0000000000..5c64b2dd96
--- /dev/null
+++ b/recipes/irda-utils/irdadump_0.9.16.bb
@@ -0,0 +1,22 @@
+DESCRIPTION = "Utility to dump IrDA traffic."
+SECTION = "base"
+LICENSE = "GPL"
+DEPENDS = "glib-1.2"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/irda/irda-utils-${PV}.tar.gz"
+
+S="${WORKDIR}/irda-utils-${PV}/irdadump"
+
+EXTRA_CFLAGS += "-I${STAGING_INCDIR}/glib-1.2/"
+EXTRA_LDFLAGS += "-lglib"
+
+inherit autotools
+
+do_compile() {
+    oe_runmake CFLAGS="${CFLAGS} ${EXTRA_CFLAGS}" LDFLAGS="${LDFLAGS} ${EXTRA_LDFLAGS}"
+}
+
+do_install () {
+	install -d ${D}${bindir}
+	install -m 0755 ${S}/shell/.libs/irdadump ${D}${bindir}
+}