summaryrefslogtreecommitdiff
path: root/packages
diff options
context:
space:
mode:
authorRod Whitby <rod@whitby.id.au>2006-01-07 07:23:51 +0000
committerOpenEmbedded Project <openembedded-devel@lists.openembedded.org>2006-01-07 07:23:51 +0000
commit0b67482ddc4fe571d16fa094627abb447b9a8edb (patch)
tree6fecde5f9d58da50e8875c25a72971e9bc0429fd /packages
parentad1444ea6d98b66a200a1f2106de844dc346f957 (diff)
nslu2-kernel: Removed obsolete 2.6.15 patches.
Diffstat (limited to 'packages')
-rw-r--r--packages/linux/nslu2-kernel/2.6.15/20-timer.patch285
-rw-r--r--packages/linux/nslu2-kernel/2.6.15/35-x1205-fix-osc.patch204
-rw-r--r--packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch21
-rw-r--r--packages/linux/nslu2-kernel/2.6.15/90-ixp4xx-nslu2.patch132
4 files changed, 0 insertions, 642 deletions
diff --git a/packages/linux/nslu2-kernel/2.6.15/20-timer.patch b/packages/linux/nslu2-kernel/2.6.15/20-timer.patch
deleted file mode 100644
index 3d4a03f616..0000000000
--- a/packages/linux/nslu2-kernel/2.6.15/20-timer.patch
+++ /dev/null
@@ -1,285 +0,0 @@
---- linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/common.c 1970-01-01 00:00:00.000000000 +0000
-@@ -239,36 +239,165 @@ void __init ixp4xx_init_irq(void)
- * IXP4xx timer tick
- * We use OS timer1 on the CPU for the timer tick and the timestamp
- * counter as a source of real clock ticks to account for missed jiffies.
-+ *
-+ * 'CLOCK_TICK_RATE' is the nominal number of internal ticks per second,
-+ * this is significantly greater than the actual number on any ixp4xx
-+ * board. Neither this nor 'LATCH' are required by this code because
-+ * the only requirement is to generate HZ timer_tick calls per second.
- *************************************************************************/
-+#if TICK_NSEC * HZ != 1000000000
-+ /* This will cause the jiffies to drift unnecessarily. */
-+# error CLOCK_TICK_RATE should be a multiple of HZ for this code
-+#endif
-+
-+/* These are the control registers for the interrupt handler, they must
-+ * only be read and written by the interrupt handler and by the init
-+ * method (which sets them to 0).
-+ */
-+static volatile u32 last_timer_time;
-+static volatile int accumulated_error;
-+
-+/* Most ixp4xx boards have 66.6666MHz crystals, so default to this, reset
-+ * this from the board level code if required. The following variables
-+ * must be *written* only by set_board_tick_rate
-+ */
-+static u32 board_tick_rate;
-+static u32 board_tick_per_1000; /* board_tick_rate/1000 */
-+static u32 timer_count;
-+
-+/* The following symbol may be written to change the current tick rate,
-+ * it is read by the interrupt handler and used to reload the timer.
-+ * The 'real' value (the one in use) is 'board_tick_rate' above.
-+ * NOTE: this can be tweaked to match the actual crystal on a particular
-+ * machine.
-+ */
-+volatile u32 ixp4xx_board_tick_rate = 66666600;
-+EXPORT_SYMBOL(ixp4xx_board_tick_rate);
-+
-+/* The set API may run asynchronously in the presence of interrupts,
-+ * everything it does it is both atomic and complete (notice that it
-+ * doesn't change any of the 'volatile' values). The mathematics in
-+ * here require the following values. Changing the board tick rate
-+ * implies an unknown error in the current timestamp tick count.
-+ */
-+#if IXP4XX_OST_RELOAD_MASK != 3 || IXP4XX_OST_ENABLE != 1
-+# error unexpected value for timer reload mask
-+#endif
-+static void set_board_tick_rate(u32 rate) {
-+ u32 reload;
-+
-+ /* Store the two effectively informational rate values, the
-+ * error calculation is (rate - count*HZ) (above), and rate
-+ * is changed first, this can cause a temporary error which
-+ * will be corrected on the next interrupt.
-+ */
-+ board_tick_rate = rate;
-+ board_tick_per_1000 = (rate+500)/1000;
-+
-+ /* Calculate the correct value to load into the timer countdown
-+ * register, the low two bits must be b01 (to enable the timer).
-+ * Select the top bits to be as close to the desired value as
-+ * possible.
-+ *
-+ * First find the best value, regardless of the low two bits -
-+ * this is the value used in the interrupt calculation even though
-+ * it cannot necessarily be set into the register.
-+ */
-+ timer_count = (rate + (HZ/2))/HZ;
-+
-+ /* Now the timer_ticks are being generated at this rate, calculate
-+ * an appropriate value for the register. This stores a 30 bit
-+ * value which gives a period of 4*x+1, we want:
-+ *
-+ * 4*x+1 = board_tick_rate/HZ
-+ *
-+ * This needs to be rounded to the closest 4*HZ value:
-+ *
-+ * x = ((board_tick_rate-HZ) + (4*HZ)/2) / 4*HZ
-+ * x = (board_tick_rate+HZ) / (4*HZ);
-+ */
-+ reload = (board_tick_rate + HZ) / HZ;
-+ reload = (reload & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ *IXP4XX_OSRT1 = reload;
-
--static unsigned volatile last_jiffy_time;
-+ /* If the clock is drifing, look in syslog: */
-+ printk(KERN_INFO "IXP4xx: FREQ=%d COUNT=%d\n", rate, reload);
-+}
-
--#define CLOCK_TICKS_PER_USEC ((CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
-+/* This returns the time in timer ticks since the 'last_timer_time'
-+ * recorded above. Use this to avoid arithmetic errors because of
-+ * the overflow when the timer wraps.
-+ */
-+static inline u32 ixp4xx_timer_delta(void)
-+{
-+ return *IXP4XX_OSTS - last_timer_time;
-+}
-
- /* IRQs are disabled before entering here from do_gettimeofday() */
- static unsigned long ixp4xx_gettimeoffset(void)
- {
-- u32 elapsed;
--
-- elapsed = *IXP4XX_OSTS - last_jiffy_time;
-+ /* Return the offset of the current time from the last time
-+ * timer tick in microseconds. This is only used for the
-+ * gettimeofday call.
-+ *
-+ * The result of this API is at most about 20000 (for a 50Hz
-+ * HZ - 20000 uS/tick), the input delta is at most about
-+ * 1.3M - 21 bits.
-+ */
-+ u32 delta = ixp4xx_timer_delta(); /* About 21 bits max */
-+ /* return delta * 1000000 / board_tick_rate; */
-+ return (delta * 1000 + board_tick_per_1000/2) / board_tick_per_1000;
-+}
-
-- return elapsed / CLOCK_TICKS_PER_USEC;
-+/* This is the correct adjustment to the counter to compensate for an
-+ * error iff timer_count-1 <= exact_count <= timer_count+1
-+ */
-+static inline int adjustment(int error) {
-+ if (error >= HZ)
-+ return 1;
-+ else if (error <= -HZ)
-+ return -1;
-+ return 0;
- }
-
- static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
- {
-+ u32 rate;
-+ u32 count;
-+ int error;
-+
- write_seqlock(&xtime_lock);
-
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
-+ /* If the board tick rate has been changed update the cached
-+ * value.
-+ */
-+ if (ixp4xx_board_tick_rate != board_tick_rate) {
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-+ accumulated_error = 0;
-+ }
-+
- /*
- * Catch up with the real idea of time
-+ *
-+ * board_tick_rate: actual ixp4xx ticks/second, read-only
-+ * accumulated_error: aggregate error/tick * HZ, read/write
-+ * timer_count: best ixp4xx ticks per timer_tick, read-only
- */
-- while ((*IXP4XX_OSTS - last_jiffy_time) > LATCH) {
-+ rate = board_tick_rate;
-+ error = accumulated_error;
-+ count = timer_count;
-+ do {
-+ u32 adjusted_count = count + adjustment(error);
-+ if (ixp4xx_timer_delta() < adjusted_count)
-+ break;
- timer_tick(regs);
-- last_jiffy_time += LATCH;
-- }
-+ last_timer_time += adjusted_count;
-+ error += rate - adjusted_count*HZ;
-+ } while (1);
-+ accumulated_error = error;
-
- write_sequnlock(&xtime_lock);
-
-@@ -281,17 +410,30 @@ static struct irqaction ixp4xx_timer_irq
- .handler = ixp4xx_timer_interrupt,
- };
-
-+u32 ixp4xx_get_board_tick_rate(void) {
-+ return board_tick_rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_get_board_tick_rate);
-+
-+void ixp4xx_set_board_tick_rate(u32 rate) {
-+ ixp4xx_board_tick_rate = rate;
-+}
-+
-+EXPORT_SYMBOL(ixp4xx_set_board_tick_rate);
-+
- static void __init ixp4xx_timer_init(void)
- {
- /* Clear Pending Interrupt by writing '1' to it */
- *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
-
- /* Setup the Timer counter value */
-- *IXP4XX_OSRT1 = (LATCH & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-+ set_board_tick_rate(ixp4xx_board_tick_rate);
-
- /* Reset time-stamp counter */
- *IXP4XX_OSTS = 0;
-- last_jiffy_time = 0;
-+ last_timer_time = 0;
-+ accumulated_error = 0;
-
- /* Connect the interrupt handler and enable the interrupt */
- setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq);
-@@ -337,4 +479,3 @@ void __init ixp4xx_sys_init(void)
- ARRAY_SIZE(ixp46x_devices));
- }
- }
--
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -119,6 +119,11 @@ static void nslu2_power_off(void)
-
- static void __init nslu2_init(void)
- {
-+ /* The NSLU2 has a 33MHz crystal on board - 1.01% different
-+ * from the typical value.
-+ */
-+ ixp4xx_set_board_tick_rate(66000000);
-+
- ixp4xx_sys_init();
-
- pm_power_off = nslu2_power_off;
---- linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/input/misc/nslu2spkr.c 1970-01-01 00:00:00.000000000 +0000
-@@ -51,7 +51,7 @@ static int nslu2_spkr_event(struct input
- }
-
- if (value > 20 && value < 32767)
-- count = (NSLU2_FREQ / (value*4)) - 1;
-+ count = (ixp4xx_get_board_tick_rate() / (value*4)) - 1;
-
- spin_lock_irqsave(&beep_lock, flags);
-
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/nslu2.h 1970-01-01 00:00:00.000000000 +0000
-@@ -38,11 +38,6 @@
- #define NSLU2_PCI_INTD_PIN 8
-
-
--/* NSLU2 Timer */
--#define NSLU2_FREQ 66000000
--#define NSLU2_CLOCK_TICK_RATE (((NSLU2_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
--#define NSLU2_CLOCK_TICKS_PER_USEC ((NSLU2_CLOCK_TICK_RATE + USEC_PER_SEC/2) / USEC_PER_SEC)
--
- /* GPIO */
-
- #define NSLU2_GPIO0 0
---- linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/asm-arm/arch-ixp4xx/timex.h 1970-01-01 00:00:00.000000000 +0000
-@@ -6,10 +6,23 @@
- #include <asm/hardware.h>
-
- /*
-- * We use IXP425 General purpose timer for our timer needs, it runs at
-- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
-- * timer register ignores the bottom 2 bits of the LATCH value.
-+ * In linux/timex.h 'LATCH' is defined as CLOCK_TICK_RATE/HZ and
-+ * is the number of internal counts per timer interrupt. Thus
-+ * CLOCK_TICK_RATE is LATCH*HZ.
-+ *
-+ * The actual values of these numbers do not matter, because they
-+ * are only used to calculate ACTHZ (rate/latch as a 24.8 fixed
-+ * point number), so the value here gives a LATCH of 1 and pretty
-+ * much guarantees to flush out any off-by-one errors.
-+ *
-+ * ACTHZ is equal to HZ, because CLOCK_TICK_RATE is a multiple of
-+ * HZ, this is checked in the ixp4xx/common.c code.
- */
--#define FREQ 66666666
--#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-+#define CLOCK_TICK_RATE HZ
-
-+/* The following allow the exact board tick rate to be set and
-+ * discovered. The value should be exactly twice the frequency
-+ * (in Hz) of the onboard crystal.
-+ */
-+extern u32 ixp4xx_get_board_tick_rate(void);
-+extern void ixp4xx_set_board_tick_rate(u32 new_rate);
diff --git a/packages/linux/nslu2-kernel/2.6.15/35-x1205-fix-osc.patch b/packages/linux/nslu2-kernel/2.6.15/35-x1205-fix-osc.patch
deleted file mode 100644
index 44f2636c5c..0000000000
--- a/packages/linux/nslu2-kernel/2.6.15/35-x1205-fix-osc.patch
+++ /dev/null
@@ -1,204 +0,0 @@
- drivers/i2c/chips/x1205.c | 116 ++++++++++++++++++++++++++++++----------------
- 1 file changed, 76 insertions(+), 40 deletions(-)
-
---- linux-nslu2.orig/drivers/i2c/chips/x1205.c 2005-12-12 18:59:07.000000000 +0100
-+++ linux-nslu2/drivers/i2c/chips/x1205.c 2005-12-13 21:31:32.000000000 +0100
-@@ -22,9 +22,9 @@
- #include <linux/string.h>
- #include <linux/bcd.h>
- #include <linux/rtc.h>
-+#include <linux/delay.h>
-
--
--#define DRV_VERSION "1.0.0"
-+#define DRV_VERSION "1.0.1"
-
- /* Addresses to scan: none. This chip is located at
- * 0x6f and uses a two bytes register addressing.
-@@ -141,35 +141,19 @@ static int x1205_validate_tm(struct rtc_
- * Epoch is initialized as 2000. Time is set to UTC.
- */
- static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
-- u8 reg_base)
-+ unsigned char reg_base)
- {
- unsigned char dt_addr[2] = { 0, reg_base };
-- static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-
-- unsigned char buf[8], sr;
-+ unsigned char buf[8];
-
- struct i2c_msg msgs[] = {
-- { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-- { client->addr, I2C_M_RD, 1, &sr }, /* read status */
- { client->addr, 0, 2, dt_addr }, /* setup read ptr */
- { client->addr, I2C_M_RD, 8, buf }, /* read date */
- };
-
-- /* read status register */
-- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-- return -EIO;
-- }
--
-- /* check for battery failure */
-- if (sr & X1205_SR_RTCF) {
-- dev_warn(&client->dev,
-- "Clock had a power failure, you must set the date.\n");
-- return -EINVAL;
-- }
--
- /* read date registers */
-- if ((i2c_transfer(client->adapter, &msgs[2], 2)) != 2) {
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
- dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
- return -EIO;
- }
-@@ -199,11 +183,28 @@ static int x1205_get_datetime(struct i2c
- return 0;
- }
-
-+static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
-+{
-+ static unsigned char sr_addr[2] = { 0, X1205_REG_SR };
-+
-+ struct i2c_msg msgs[] = {
-+ { client->addr, 0, 2, sr_addr }, /* setup read ptr */
-+ { client->addr, I2C_M_RD, 1, sr }, /* read status */
-+ };
-+
-+ /* read status register */
-+ if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
-+ dev_err(&client->dev, "%s: read error\n", __FUNCTION__);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
- static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
- {
-- int i, err, xfer;
--
-+ int i, xfer;
- unsigned char buf[8];
-
- static const unsigned char wel[3] = { 0, X1205_REG_SR,
-@@ -214,15 +215,10 @@ static int x1205_set_datetime(struct i2c
-
- static const unsigned char diswe[3] = { 0, X1205_REG_SR, 0 };
-
-- /* check if all values in the tm struct are correct */
-- if ((err = x1205_validate_tm(tm)) < 0)
-- return err;
--
-- dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
-- "mday=%d, mon=%d, year=%d, wday=%d\n",
-+ dev_dbg(&client->dev,
-+ "%s: secs=%d, mins=%d, hours=%d\n",
- __FUNCTION__,
-- tm->tm_sec, tm->tm_min, tm->tm_hour,
-- tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+ tm->tm_sec, tm->tm_min, tm->tm_hour);
-
- buf[CCR_SEC] = BIN2BCD(tm->tm_sec);
- buf[CCR_MIN] = BIN2BCD(tm->tm_min);
-@@ -232,6 +228,11 @@ static int x1205_set_datetime(struct i2c
-
- /* should we also set the date? */
- if (datetoo) {
-+ dev_dbg(&client->dev,
-+ "%s: mday=%d, mon=%d, year=%d, wday=%d\n",
-+ __FUNCTION__,
-+ tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
-+
- buf[CCR_MDAY] = BIN2BCD(tm->tm_mday);
-
- /* month, 0 - 11 */
-@@ -280,6 +281,22 @@ static int x1205_set_datetime(struct i2c
- return 0;
- }
-
-+static int x1205_fix_osc(struct i2c_client *client)
-+{
-+ int err;
-+ struct rtc_time tm;
-+
-+ tm.tm_hour = 0;
-+ tm.tm_min = 0;
-+ tm.tm_sec = 0;
-+
-+ if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
-+ dev_err(&client->dev,
-+ "unable to restart the clock\n");
-+
-+ return err;
-+}
-+
- static int x1205_get_dtrim(struct i2c_client *client, int *trim)
- {
- unsigned char dtr;
-@@ -352,14 +369,17 @@ static int x1205_hctosys(struct i2c_clie
-
- struct rtc_time tm;
- struct timespec tv;
-+ unsigned char sr;
-
-+ if ((err = x1205_get_status(client, &sr)) < 0)
-+ return err;
-
-- err = x1205_get_datetime(client, &tm, X1205_CCR_BASE);
-- if (err) {
-- dev_err(&client->dev,
-- "Unable to set the system clock\n");
-+ /* Don't set if we had a power failure */
-+ if (sr & X1205_SR_RTCF)
-+ return -EINVAL;
-+
-+ if ((err = x1205_get_datetime(client, &tm, X1205_CCR_BASE)) < 0)
- return err;
-- }
-
- /* IMPORTANT: the RTC only stores whole seconds. It is arbitrary
- * whether it stores the most close value or the value with partial
-@@ -506,9 +526,9 @@ static int x1205_attach(struct i2c_adapt
-
- static int x1205_probe(struct i2c_adapter *adapter, int address, int kind)
- {
-- struct i2c_client *client;
--
- int err = 0;
-+ unsigned char sr;
-+ struct i2c_client *client;
-
- dev_dbg(&adapter->dev, "%s\n", __FUNCTION__);
-
-@@ -543,9 +563,25 @@ static int x1205_probe(struct i2c_adapte
-
- dev_info(&client->dev, "chip found, driver version " DRV_VERSION "\n");
-
-+ /* Check for power failures and eventualy enable the osc */
-+ if ((err = x1205_get_status(client, &sr)) == 0) {
-+ if (sr & X1205_SR_RTCF) {
-+ dev_err(&client->dev,
-+ "power failure detected, "
-+ "please set the clock\n");
-+ udelay(50);
-+ x1205_fix_osc(client);
-+ }
-+ }
-+ else
-+ dev_err(&client->dev, "couldn't read status\n");
-+
- /* If requested, set the system time */
-- if (hctosys)
-- x1205_hctosys(client);
-+ if (hctosys) {
-+ if ((err = x1205_hctosys(client)) < 0)
-+ dev_err(&client->dev,
-+ "unable to set the system clock\n");
-+ }
-
- return 0;
-
diff --git a/packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch b/packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch
deleted file mode 100644
index 9e390c6b7a..0000000000
--- a/packages/linux/nslu2-kernel/2.6.15/60-nslu2-rtc.patch
+++ /dev/null
@@ -1,21 +0,0 @@
- arch/arm/mach-ixp4xx/nslu2-setup.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/arch/arm/mach-ixp4xx/nslu2-setup.c 1970-01-01 00:00:00.000000000 +0000
-@@ -95,10 +95,15 @@ static struct platform_device nslu2_uart
- .resource = nslu2_uart_resources,
- };
-
-+static struct platform_device nslu2_rtc = {
-+ .name = "x1205-rtc",
-+};
-+
- static struct platform_device *nslu2_devices[] __initdata = {
- &nslu2_i2c_controller,
- &nslu2_flash,
- &nslu2_uart,
-+ &nslu2_rtc,
- };
-
- static void nslu2_power_off(void)
diff --git a/packages/linux/nslu2-kernel/2.6.15/90-ixp4xx-nslu2.patch b/packages/linux/nslu2-kernel/2.6.15/90-ixp4xx-nslu2.patch
deleted file mode 100644
index c106f7c957..0000000000
--- a/packages/linux/nslu2-kernel/2.6.15/90-ixp4xx-nslu2.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-ixp4xx updates:
- - Handle reads that don't start on a half-word boundary.
- - Make it work when CPU is in little-endian mode.
-
-Signed-off-by: John Bowler <jbowler@acm.org>
-Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
-Signed-off-by: David Vrabel <dvrabel@arcom.com>
-
-Index: linux-2.6-working/drivers/mtd/maps/ixp4xx.c
-===================================================================
---- linux-2.6-working.orig/drivers/mtd/maps/ixp4xx.c 2005-11-16 15:19:34.000000000 +0000
-+++ linux-2.6-working/drivers/mtd/maps/ixp4xx.c 2005-11-16 16:06:54.000000000 +0000
-@@ -34,10 +34,55 @@
-
- #include <linux/reboot.h>
-
-+/*
-+ * Read/write a 16 bit word from flash address 'addr'.
-+ *
-+ * When the cpu is in little-endian mode it swizzles the address lines
-+ * ('address coherency') so we need to undo the swizzling to ensure commands
-+ * and the like end up on the correct flash address.
-+ *
-+ * To further complicate matters, due to the way the expansion bus controller
-+ * handles 32 bit reads, the byte stream ABCD is stored on the flash as:
-+ * D15 D0
-+ * +---+---+
-+ * | A | B | 0
-+ * +---+---+
-+ * | C | D | 2
-+ * +---+---+
-+ * This means that on LE systems each 16 bit word must be swapped. Note that
-+ * this requires CONFIG_MTD_CFI_BE_BYTE_SWAP to be enabled to 'unswap' the CFI
-+ * data and other flash commands which are always in D7-D0.
-+ */
- #ifndef __ARMEB__
-+#ifndef CONFIG_MTD_CFI_BE_BYTE_SWAP
-+# error CONFIG_MTD_CFI_BE_BYTE_SWAP required
-+#endif
-+
-+static inline u16 flash_read16(void __iomem *addr)
-+{
-+ return be16_to_cpu(__raw_readw((void __iomem *)((unsigned long)addr ^ 0x2)));
-+}
-+
-+static inline void flash_write16(u16 d, void __iomem *addr)
-+{
-+ __raw_writew(cpu_to_be16(d), (void __iomem *)((unsigned long)addr ^ 0x2));
-+}
-+
- #define BYTE0(h) ((h) & 0xFF)
- #define BYTE1(h) (((h) >> 8) & 0xFF)
-+
- #else
-+
-+static inline u16 flash_read16(const void __iomem *addr)
-+{
-+ return __raw_readw(addr);
-+}
-+
-+static inline void flash_write16(u16 d, void __iomem *addr)
-+{
-+ __raw_writew(d, addr);
-+}
-+
- #define BYTE0(h) (((h) >> 8) & 0xFF)
- #define BYTE1(h) ((h) & 0xFF)
- #endif
-@@ -45,7 +90,7 @@
- static map_word ixp4xx_read16(struct map_info *map, unsigned long ofs)
- {
- map_word val;
-- val.x[0] = le16_to_cpu(readw(map->virt + ofs));
-+ val.x[0] = flash_read16(map->virt + ofs);
- return val;
- }
-
-@@ -57,19 +102,28 @@
- static void ixp4xx_copy_from(struct map_info *map, void *to,
- unsigned long from, ssize_t len)
- {
-- int i;
- u8 *dest = (u8 *) to;
- void __iomem *src = map->virt + from;
-- u16 data;
-
-- for (i = 0; i < (len / 2); i++) {
-- data = le16_to_cpu(readw(src + 2*i));
-- dest[i * 2] = BYTE0(data);
-- dest[i * 2 + 1] = BYTE1(data);
-+ if (len <= 0)
-+ return;
-+
-+ if (from & 1) {
-+ *dest++ = BYTE1(flash_read16(src));
-+ src++;
-+ --len;
- }
-
-- if (len & 1)
-- dest[len - 1] = BYTE0(le16_to_cpu(readw(src + 2*i)));
-+ while (len >= 2) {
-+ u16 data = flash_read16(src);
-+ *dest++ = BYTE0(data);
-+ *dest++ = BYTE1(data);
-+ src += 2;
-+ len -= 2;
-+ }
-+
-+ if (len > 0)
-+ *dest++ = BYTE0(flash_read16(src));
- }
-
- /*
-@@ -79,7 +133,7 @@
- static void ixp4xx_probe_write16(struct map_info *map, map_word d, unsigned long adr)
- {
- if (!(adr & 1))
-- writew(cpu_to_le16(d.x[0]), map->virt + adr);
-+ flash_write16(d.x[0], map->virt + adr);
- }
-
- /*
-@@ -87,7 +141,7 @@
- */
- static void ixp4xx_write16(struct map_info *map, map_word d, unsigned long adr)
- {
-- writew(cpu_to_le16(d.x[0]), map->virt + adr);
-+ flash_write16(d.x[0], map->virt + adr);
- }
-
- struct ixp4xx_flash_info {