Merge branch 'org.openembedded.dev' of git://git.openembedded.net/openembedded into org.openembedded.dev

9 files changed, 187 insertions, 8 deletions

diff --git a/packages/bluez/bluez4_4.27.bb b/packages/bluez/bluez4_4.29.bb
index c9aa79e8ed..c9aa79e8ed 100644
--- a/packages/bluez/bluez4_4.27.bb
+++ b/packages/bluez/bluez4_4.29.bb
diff --git a/packages/linux/linux-2.6.24/oxe810/defconfig b/packages/linux/linux-2.6.24/oxnas/defconfig
index 5382e30f85..5382e30f85 100644
--- a/packages/linux/linux-2.6.24/oxe810/defconfig
+++ b/packages/linux/linux-2.6.24/oxnas/defconfig
diff --git a/packages/linux/linux-2.6.24/oxnas/oxnas-uart.patch b/packages/linux/linux-2.6.24/oxnas/oxnas-uart.patch
new file mode 100644
index 0000000000..e72b0db898
--- /dev/null
+++ b/packages/linux/linux-2.6.24/oxnas/oxnas-uart.patch
@@ -0,0 +1,176 @@
+diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_dse_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_dse_defconfig
+--- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_dse_defconfig	2009-02-05 12:06:15.000000000 +0100
++++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_dse_defconfig	2009-02-05 12:08:36.000000000 +0100
+@@ -160,6 +160,8 @@
+ # CONFIG_OXNAS_VERSION_0X850 is not set
+ # CONFIG_ARCH_OXNAS_UART1 is not set
+ CONFIG_ARCH_OXNAS_UART2=y
++CONFIG_ARCH_OXNAS_UART2_DEBUG=y
++CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y
+ # CONFIG_ARCH_OXNAS_UART2_MODEM is not set
+ # CONFIG_ARCH_OXNAS_UART3 is not set
+ # CONFIG_ARCH_OXNAS_PCI_REQGNT_0 is not set
+diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig
+--- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig	2009-02-05 12:06:15.000000000 +0100
++++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_upgrade_defconfig	2009-02-05 12:08:36.000000000 +0100
+@@ -152,6 +152,8 @@
+ # CONFIG_OXNAS_VERSION_0X850 is not set
+ # CONFIG_ARCH_OXNAS_UART1 is not set
+ CONFIG_ARCH_OXNAS_UART2=y
++CONFIG_ARCH_OXNAS_UART2_DEBUG=y
++CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y
+ # CONFIG_ARCH_OXNAS_UART2_MODEM is not set
+ # CONFIG_ARCH_OXNAS_UART3 is not set
+ # CONFIG_ARCH_OXNAS_PCI_REQGNT_0 is not set
+diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig
+--- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig	2009-02-05 12:06:15.000000000 +0100
++++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_eval_defconfig	2009-02-05 12:08:36.000000000 +0100
+@@ -160,6 +160,8 @@
+ # CONFIG_OXNAS_VERSION_0X850 is not set
+ # CONFIG_ARCH_OXNAS_UART1 is not set
+ CONFIG_ARCH_OXNAS_UART2=y
++CONFIG_ARCH_OXNAS_UART2_DEBUG=y
++CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y
+ # CONFIG_ARCH_OXNAS_UART2_MODEM is not set
+ # CONFIG_ARCH_OXNAS_UART3 is not set
+ # CONFIG_ARCH_OXNAS_UART4 is not set
+diff -Nurd linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig
+--- linux-2.6.24.org/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig	2009-02-05 12:06:15.000000000 +0100
++++ linux-2.6.24/arch/arm/configs/oxnas_810_eabi_wd_prod_defconfig	2009-02-05 12:08:36.000000000 +0100
+@@ -158,6 +158,8 @@
+ # CONFIG_OXNAS_VERSION_0X850 is not set
+ # CONFIG_ARCH_OXNAS_UART1 is not set
+ CONFIG_ARCH_OXNAS_UART2=y
++CONFIG_ARCH_OXNAS_UART2_DEBUG=y
++CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS=y
+ # CONFIG_ARCH_OXNAS_UART2_MODEM is not set
+ # CONFIG_ARCH_OXNAS_UART3 is not set
+ # CONFIG_ARCH_OXNAS_UART4 is not set
+diff -Nurd linux-2.6.24.org/arch/arm/mach-oxnas/Kconfig linux-2.6.24/arch/arm/mach-oxnas/Kconfig
+--- linux-2.6.24.org/arch/arm/mach-oxnas/Kconfig	2009-02-05 12:06:15.000000000 +0100
++++ linux-2.6.24/arch/arm/mach-oxnas/Kconfig	2009-02-05 12:08:34.000000000 +0100
+@@ -66,6 +66,20 @@
+ 		UARTs will be mapped to ttySn numbers from UART1 to UART4, only
+ 		including those UARTs selected to be present
+ 
++config ARCH_OXNAS_UART1_DEBUG
++	bool "Use UART1 as debug channel"
++	depends on ARCH_OXNAS_UART1
++	default n
++	help
++		This enables UART1 to be usable as debug channel.
++
++config ARCH_OXNAS_UART1_BOOTPROGRESS
++	bool "Display boot progress over UART1"
++	depends on ARCH_OXNAS_UART1
++	default n
++	help
++		This enables displaying boot progress over UART1.
++
+ config ARCH_OXNAS_UART1_MODEM
+ 	bool "Support UART1 modem control lines"
+ 	depends on ARCH_OXNAS_UART1
+@@ -81,6 +95,20 @@
+ 		UARTs will be mapped to ttySn numbers from UART1 to UART4, only
+ 		including those UARTs selected to be present
+ 
++config ARCH_OXNAS_UART2_DEBUG
++	bool "Use UART2 as debug channel"
++	depends on ARCH_OXNAS_UART2
++	default n
++	help
++		This enables UART2 to be usable as debug channel.
++
++config ARCH_OXNAS_UART2_BOOTPROGRESS
++	bool "Display boot progress over UART2"
++	depends on ARCH_OXNAS_UART2
++	default n
++	help
++		This enables displaying boot progress over UART2.
++
+ config ARCH_OXNAS_UART2_MODEM
+ 	bool "Support UART2 modem control lines"
+ 	depends on ARCH_OXNAS_UART2
+@@ -96,6 +124,20 @@
+ 		UARTs will be mapped to ttySn numbers from UART1 to UART4, only
+ 		including those UARTs selected to be present
+ 
++config ARCH_OXNAS_UART3_DEBUG
++	bool "Use UART3 as debug channel"
++	depends on ARCH_OXNAS_UART3
++	default n
++	help
++		This enables UART3 to be usable as debug channel.
++
++config ARCH_OXNAS_UART3_BOOTPROGRESS
++	bool "Display boot progress over UART3"
++	depends on ARCH_OXNAS_UART3
++	default n
++	help
++		This enables displaying boot progress over UART3.
++
+ config ARCH_OXNAS_UART3_MODEM
+ 	bool "Support UART3 modem control lines"
+ 	depends on ARCH_OXNAS_UART3
+@@ -114,6 +156,20 @@
+ 		UART4 always has its modem control lines available on external pins
+ 		when selected (overlaying PCI functions)
+ 
++config ARCH_OXNAS_UART4_DEBUG
++	bool "Use UART4 as debug channel"
++	depends on ARCH_OXNAS_UART4
++	default n
++	help
++		This enables UART4 to be usable as debug channel.
++
++config ARCH_OXNAS_UART4_BOOTPROGRESS
++	bool "Display boot progress over UART4"
++	depends on ARCH_OXNAS_UART4
++	default n
++	help
++		This enables displaying boot progress over UART4.
++
+ config ARCH_OXNAS_PCI_REQGNT_0
+ 	bool "Enable req/gnt for PCI device 0"
+ 	depends on PCI
+diff -Nurd linux-2.6.24.org/include/asm-arm/arch-oxnas/debug-macro.S linux-2.6.24/include/asm-arm/arch-oxnas/debug-macro.S
+--- linux-2.6.24.org/include/asm-arm/arch-oxnas/debug-macro.S	2009-02-05 12:06:19.000000000 +0100
++++ linux-2.6.24/include/asm-arm/arch-oxnas/debug-macro.S	2009-02-05 12:08:34.000000000 +0100
+@@ -14,13 +14,13 @@
+ 		.macro  addruart,rx
+ 		mrc		p15, 0, \rx, c1, c0
+ 		tst		\rx, #1					@ MMU enabled?
+-#ifdef CONFIG_ARCH_OXNAS_UART1
++#ifdef CONFIG_ARCH_OXNAS_UART1_DEBUG
+ 		ldreq	\rx, =UART_1_BASE_PA	@ physical base address
+ 		ldrne	\rx, =UART_1_BASE		@ virtual address
+-#elif CONFIG_ARCH_OXNAS_UART2
++#elif CONFIG_ARCH_OXNAS_UART2_DEBUG
+ 		ldreq	\rx, =UART_2_BASE_PA	@ physical base address
+ 		ldrne	\rx, =UART_2_BASE		@ virtual address
+-#elif CONFIG_ARCH_OXNAS_UART3
++#elif CONFIG_ARCH_OXNAS_UART3_DEBUG
+ 		ldreq	\rx, =UART_3_BASE_PA	@ physical base address
+ 		ldrne	\rx, =UART_3_BASE		@ virtual address
+ #else
+diff -Nurd linux-2.6.24.org/include/asm-arm/arch-oxnas/uncompress.h linux-2.6.24/include/asm-arm/arch-oxnas/uncompress.h
+--- linux-2.6.24.org/include/asm-arm/arch-oxnas/uncompress.h	2009-02-05 12:06:19.000000000 +0100
++++ linux-2.6.24/include/asm-arm/arch-oxnas/uncompress.h	2009-02-05 12:08:34.000000000 +0100
+@@ -12,13 +12,13 @@
+ 
+ static inline void putc(int c)
+ {
+-#ifdef CONFIG_ARCH_OXNAS_UART1
++#ifdef CONFIG_ARCH_OXNAS_UART1_BOOTPROGRESS
+     static volatile unsigned char* uart = (volatile unsigned char*)UART_1_BASE_PA;
+-#elif defined(CONFIG_ARCH_OXNAS_UART2)
++#elif defined(CONFIG_ARCH_OXNAS_UART2_BOOTPROGRESS)
+     static volatile unsigned char* uart = (volatile unsigned char*)UART_2_BASE_PA;
+-#elif defined(CONFIG_ARCH_OXNAS_UART3)
++#elif defined(CONFIG_ARCH_OXNAS_UART3_BOOTPROGRESS)
+     static volatile unsigned char* uart = (volatile unsigned char*)UART_3_BASE_PA;
+-#elif defined(CONFIG_ARCH_OXNAS_UART4)
++#elif defined(CONFIG_ARCH_OXNAS_UART4_BOOTPROGRESS)
+     static volatile unsigned char* uart = (volatile unsigned char*)UART_4_BASE_PA;
+ #else
+ #define NO_UART
diff --git a/packages/linux/linux-2.6.24/oxe810/oxe810.diff b/packages/linux/linux-2.6.24/oxnas/oxnas.diff
index 04ff1a670b..04ff1a670b 100644
--- a/packages/linux/linux-2.6.24/oxe810/oxe810.diff
+++ b/packages/linux/linux-2.6.24/oxnas/oxnas.diff
diff --git a/packages/linux/linux-openmoko-devel_git.bb b/packages/linux/linux-openmoko-devel_git.bb
index 4860cca2b6..56c57b395a 100644
--- a/packages/linux/linux-openmoko-devel_git.bb
+++ b/packages/linux/linux-openmoko-devel_git.bb
@@ -10,7 +10,7 @@ KERNEL_VERSION = "${KERNEL_RELEASE}"
 
 OEV = "oe1"
 PV = "${KERNEL_RELEASE}-${OEV}+gitr${SRCREV}"
-PR = "r2"
+PR = "r3"
 
 SRC_URI = "\
   git://git.openmoko.org/git/kernel.git;protocol=git;branch=andy-tracking \
@@ -20,7 +20,7 @@ SRC_URI = "\
 S = "${WORKDIR}/git"
 
 do_configure_prepend() {
-	install -m 644 ./arch/arm/configs/gta02-packaging-defconfig ${WORKDIR}/defconfig-oe
+	install -m 644 ./arch/arm/configs/gta02_packaging_defconfig ${WORKDIR}/defconfig-oe
 	cat ${WORKDIR}/defconfig-oe.patch | patch -p0 -d ${WORKDIR}
 }
 
diff --git a/packages/linux/linux_2.6.24.bb b/packages/linux/linux_2.6.24.bb
index d7b9abf506..7c4ee55173 100644
--- a/packages/linux/linux_2.6.24.bb
+++ b/packages/linux/linux_2.6.24.bb
@@ -8,10 +8,10 @@ DEFAULT_PREFERENCE_simpad = "1"
 DEFAULT_PREFERENCE_atngw100 = "1"
 DEFAULT_PREFERENCE_at32stk1000 = "1"
 DEFAULT_PREFERENCE_ts72xx = "1"
-DEFAULT_PREFERENCE_oxe810 = "1"
+DEFAULT_PREFERENCE_oxnas = "1"
 DEFAULT_PREFERENCE_cs-e9302 = "1"
 
-PR = "r18"
+PR = "r20"
 
 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-2.6.24.tar.bz2 \
            http://kamikaze.waninkoko.info/patches/2.6.24/kamikaze1/broken-out/squashfs-lzma-2.6.24.patch;patch=1 \
@@ -84,8 +84,9 @@ SRC_URI_append_ts72xx = "\
 	file://ts72xx-use-cpld-reset.patch;patch=1 \
 	file://ts72xx-rs485.patch;patch=1"
 
-SRC_URI_append_oxe810 = " \
-	file://oxe810.diff;patch=1 \
+SRC_URI_append_oxnas = " \
+	file://oxnas.diff;patch=1 \
+	file://oxnas-uart.patch;patch=1 \
 	"
 
 CMDLINE_cm-x270 = "console=${CMX270_CONSOLE_SERIAL_PORT},38400 monitor=1 mem=64M mtdparts=physmap-flash.0:256k(boot)ro,0x180000(kernel),-(root);cm-x270-nand:64m(app),-(data) rdinit=/sbin/init root=mtd3 rootfstype=jffs2"
diff --git a/packages/python/python-twisted-native_8.2.0.bb b/packages/python/python-twisted-native_8.2.0.bb
index 063f0fdb13..d35b9f2482 100644
--- a/packages/python/python-twisted-native_8.2.0.bb
+++ b/packages/python/python-twisted-native_8.2.0.bb
@@ -1,5 +1,7 @@
 require python-twisted_${PV}.bb
 
+RDEPENDS_${PN} = ""
+
 inherit native
 
 do_stage() {
diff --git a/packages/u-boot/u-boot-1.1.2/oxe810.patch b/packages/u-boot/u-boot-1.1.2/oxnas.patch
index f1fff14822..f1fff14822 100644
--- a/packages/u-boot/u-boot-1.1.2/oxe810.patch
+++ b/packages/u-boot/u-boot-1.1.2/oxnas.patch
diff --git a/packages/u-boot/u-boot_1.1.2.bb b/packages/u-boot/u-boot_1.1.2.bb
index 1afb3eec5a..c83e31f532 100644
--- a/packages/u-boot/u-boot_1.1.2.bb
+++ b/packages/u-boot/u-boot_1.1.2.bb
@@ -13,7 +13,7 @@ SRC_URI_append_mnci   = "file://mnci.patch;patch=1 \
                          file://command-names.patch;patch=1"
 
 SRC_URI_append_magicbox  = "file://u-boot-emetec.patch;patch=1 "
-SRC_URI_append_oxe810  = "file://oxe810.patch;patch=1 "
+SRC_URI_append_oxnas     = "file://oxnas.patch;patch=1 "
 
 
 # TODO: SRC_URI_append_rt3000
@@ -23,7 +23,7 @@ TARGET_LDFLAGS = ""
 UBOOT_MACHINE_mnci   = "mnci_config"
 UBOOT_MACHINE_vibren = "pxa255_idp_config"
 UBOOT_MACHINE_magicbox = "EMETEC405_config"
-UBOOT_MACHINE_oxe810 = "oxnas_config"
+UBOOT_MACHINE_oxnas  = "oxnas_config"
 
 inherit base