merge of '06439bd12faeb366d7d703a017d5c609d41cb96e'

     and '8334fa112d76dd1bff6086d9cbd2007755c42e05'

8 files changed, 450 insertions, 11 deletions

diff --git a/packages/linux/linux-omap/musb-fix-endpoints.diff b/packages/linux/linux-omap/musb-fix-endpoints.diff
new file mode 100644
index 0000000000..5d1201f014
--- /dev/null
+++ b/packages/linux/linux-omap/musb-fix-endpoints.diff
@@ -0,0 +1,197 @@
+From: Ajay Kumar Gupta <ajay.gupta@ti.com>
+To: linux-usb@vger.kernel.org
+Cc: linux-omap@vger.kernel.org, david-b@pacbell.net, me@felipebalbi.com,
+        Ajay Kumar Gupta <ajay.gupta@ti.com>
+Subject: [PATCH] MUSB: BULK request on different available endpoints
+Date: 	Tue,  7 Oct 2008 11:12:24 +0530
+
+Fixes co-working issue of usb serial device with usb/net devices while
+oter endpoints are free and can be used.This patch implements the policy
+that if endpoint resources are available then different BULK request goes
+to different endpoint otherwise they are multiplexed to one reserved
+endpoint as currently done.
+
+NAK limit scheme has to be added for multiplexed BULK request scenario
+to avoid endpoint starvation due to usb/net devices.
+
+musb->periodic[] flag setting is also updated.It use to set this flag for
+an endpoint even when only rx or tx is used.Now flag setting is done on
+rx/tx basis of an endpoint.
+
+Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
+---
+ drivers/usb/musb/musb_host.c |   94 ++++++++++++++++++++++++------------------
+ drivers/usb/musb/musb_host.h |    1 +
+ 2 files changed, 55 insertions(+), 40 deletions(-)
+ 
+--- /tmp/musb_host.c	2008-10-07 10:10:49.000000000 +0200
++++ git/drivers/usb/musb/musb_host.c	2008-10-07 10:13:59.000000000 +0200
+@@ -378,27 +378,32 @@
+ 
+ 		switch (qh->type) {
+ 
++		case USB_ENDPOINT_XFER_CONTROL:
++		case USB_ENDPOINT_XFER_BULK:
++			/* fifo policy for these lists, except that NAKing
++			 * should rotate a qh to the end (for fairness).
++			 */
++			if (qh->mux == 1) {
++				head = qh->ring.prev;
++				list_del(&qh->ring);
++				kfree(qh);
++				qh = first_qh(head);
++				break;
++			}
+ 		case USB_ENDPOINT_XFER_ISOC:
+ 		case USB_ENDPOINT_XFER_INT:
+ 			/* this is where periodic bandwidth should be
+ 			 * de-allocated if it's tracked and allocated;
+ 			 * and where we'd update the schedule tree...
+ 			 */
+-			musb->periodic[ep->epnum] = NULL;
++			if (is_in)
++				musb->periodic[2 * ep->epnum - 2] = NULL;
++			else
++				musb->periodic[2 * ep->epnum - 1] = NULL;
+ 			kfree(qh);
+ 			qh = NULL;
+ 			break;
+ 
+-		case USB_ENDPOINT_XFER_CONTROL:
+-		case USB_ENDPOINT_XFER_BULK:
+-			/* fifo policy for these lists, except that NAKing
+-			 * should rotate a qh to the end (for fairness).
+-			 */
+-			head = qh->ring.prev;
+-			list_del(&qh->ring);
+-			kfree(qh);
+-			qh = first_qh(head);
+-			break;
+ 		}
+ 	}
+ 	return qh;
+@@ -1728,22 +1733,9 @@
+ 	u16 			maxpacket;
+ 
+ 	/* use fixed hardware for control and bulk */
+-	switch (qh->type) {
+-	case USB_ENDPOINT_XFER_CONTROL:
++	if (qh->type == USB_ENDPOINT_XFER_CONTROL) {
+ 		head = &musb->control;
+ 		hw_ep = musb->control_ep;
+-		break;
+-	case USB_ENDPOINT_XFER_BULK:
+-		hw_ep = musb->bulk_ep;
+-		if (is_in)
+-			head = &musb->in_bulk;
+-		else
+-			head = &musb->out_bulk;
+-		break;
+-	}
+-	if (head) {
+-		idle = list_empty(head);
+-		list_add_tail(&qh->ring, head);
+ 		goto success;
+ 	}
+ 
+@@ -1778,7 +1770,8 @@
+ 	for (epnum = 1; epnum < musb->nr_endpoints; epnum++) {
+ 		int	diff;
+ 
+-		if (musb->periodic[epnum])
++		if ((is_in && musb->periodic[2 * epnum - 2]) ||
++			(!is_in && musb->periodic[2 * epnum - 1]))
+ 			continue;
+ 		hw_ep = &musb->endpoints[epnum];
+ 		if (hw_ep == musb->bulk_ep)
+@@ -1789,19 +1782,36 @@
+ 		else
+ 			diff = hw_ep->max_packet_sz_tx - maxpacket;
+ 
+-		if (diff > 0 && best_diff > diff) {
++		if (diff >= 0 && best_diff > diff) {
+ 			best_diff = diff;
+ 			best_end = epnum;
+ 		}
+ 	}
+-	if (best_end < 0)
++	/* use bulk reserved ep1 if no other ep is free*/
++	if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) {
++		hw_ep = musb->bulk_ep;
++		if (is_in)
++			head = &musb->in_bulk;
++		else
++			head = &musb->out_bulk;
++		goto success;
++	} else if (best_end < 0)
+ 		return -ENOSPC;
+ 
+ 	idle = 1;
++	qh->mux = 0;
+ 	hw_ep = musb->endpoints + best_end;
+-	musb->periodic[best_end] = qh;
+-	DBG(4, "qh %p periodic slot %d\n", qh, best_end);
++	if (is_in)
++		musb->periodic[2 * best_end - 2] = qh;
++	else
++		musb->periodic[2 * best_end - 1] = qh;
++	DBG(4, "qh %p periodic slot %d%s\n", qh, best_end, is_in ? "Rx" : "Tx");
+ success:
++	if (head) {
++		idle = list_empty(head);
++		list_add_tail(&qh->ring, head);
++		qh->mux = 1;
++	}
+ 	qh->hw_ep = hw_ep;
+ 	qh->hep->hcpriv = qh;
+ 	if (idle)
+@@ -2065,11 +2075,13 @@
+ 			sched = &musb->control;
+ 			break;
+ 		case USB_ENDPOINT_XFER_BULK:
+-			if (usb_pipein(urb->pipe))
+-				sched = &musb->in_bulk;
+-			else
+-				sched = &musb->out_bulk;
+-			break;
++			if (qh->mux == 1) {
++				if (usb_pipein(urb->pipe))
++					sched = &musb->in_bulk;
++				else
++					sched = &musb->out_bulk;
++				break;
++			}
+ 		default:
+ 			/* REVISIT when we get a schedule tree, periodic
+ 			 * transfers won't always be at the head of a
+@@ -2131,11 +2143,13 @@
+ 		sched = &musb->control;
+ 		break;
+ 	case USB_ENDPOINT_XFER_BULK:
+-		if (is_in)
+-			sched = &musb->in_bulk;
+-		else
+-			sched = &musb->out_bulk;
+-		break;
++		if (qh->mux == 1) {
++			if (is_in)
++				sched = &musb->in_bulk;
++			else
++				sched = &musb->out_bulk;
++			break;
++		}
+ 	case USB_ENDPOINT_XFER_ISOC:
+ 	case USB_ENDPOINT_XFER_INT:
+ 		for (i = 0; i < musb->nr_endpoints; i++) {
+--- /tmp/musb_host.h	2008-10-07 08:59:38.000000000 +0200
++++ git/drivers/usb/musb/musb_host.h	2008-10-07 10:10:54.000000000 +0200
+@@ -53,7 +53,8 @@
+ 
+ 	struct list_head	ring;		/* of musb_qh */
+ 	/* struct musb_qh		*next; */	/* for periodic tree */
+-
++	u8          mux;        /* qh multiplexed to hw_ep */
++	
+ 	unsigned		offset;		/* in urb->transfer_buffer */
+ 	unsigned		segsize;	/* current xfer fragment */
+ 
diff --git a/packages/linux/linux-omap_git.bb b/packages/linux/linux-omap_git.bb
index b00572771c..290d90084b 100644
--- a/packages/linux/linux-omap_git.bb
+++ b/packages/linux/linux-omap_git.bb
@@ -9,7 +9,7 @@ COMPATIBLE_MACHINE = "omap5912osk|omap1710h3|omap2430sdp|omap2420h4|beagleboard|
 SRCREV = "e1c49d7d22af768188e2a54c167ed79919361e55"
 
 PV = "2.6.26+2.6.27-rc7+${PR}+git${SRCREV}"
-PR = "r11"
+PR = "r12"
 
 SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git;protocol=git \
 	   file://defconfig"
@@ -33,6 +33,7 @@ SRC_URI_append = " \
            file://musb-fix-ISO-in-unlink.diff;patch=1 \
            file://musb-fix-multiple-bulk-transfers.diff;patch=1 \
            file://mru-256MB.diff;patch=1 \
+           file://musb-fix-endpoints.diff;patch=1 \
 "
 
 
diff --git a/packages/tasks/task-openmoko-feed.bb b/packages/tasks/task-openmoko-feed.bb
index ed885703c7..40e97585ea 100644
--- a/packages/tasks/task-openmoko-feed.bb
+++ b/packages/tasks/task-openmoko-feed.bb
@@ -1,7 +1,7 @@
 DESCRIPTION = "Openmoko: Misc. Feed Items"
 SECTION = "openmoko/base"
 LICENSE = "MIT"
-PR = "r41"
+PR = "r42"
 
 inherit task
 
@@ -42,12 +42,13 @@ RDEPENDS_task-openmoko-feed = "\
 #  cacao \
 #  jamvm \
 #  classpath \
-  gpsdrive \
+#  gpsdrive \
+  gpsd \
   asterisk \
 #  gnash \
   mono \
-  diversity-daemon \
-  diversity-maps-taipei \
+#  diversity-daemon \
+#  diversity-maps-taipei \
 #  om-maps-berlin \
 #  om-maps-buenos-aires \
 #  om-maps-london \
diff --git a/packages/u-boot/u-boot-git/beagleboard/beagle-600MHz.diff b/packages/u-boot/u-boot-git/beagleboard/beagle-600MHz.diff
new file mode 100644
index 0000000000..fe183ddb77
--- /dev/null
+++ b/packages/u-boot/u-boot-git/beagleboard/beagle-600MHz.diff
@@ -0,0 +1,21 @@
+From: Mans Rullgard <mans@mansr.com>
+Date: Mon, 29 Sep 2008 19:56:45 +0000 (+0100)
+Subject: OMAP3: Set MPU clock to 600 MHz
+X-Git-Url: http://git.mansr.com/?p=u-boot;a=commitdiff_plain;h=caccdb772c3028a3e3e801fb1554788150752ffc
+
+OMAP3: Set MPU clock to 600 MHz
+---
+
+diff --git a/cpu/omap3/lowlevel_init.S b/cpu/omap3/lowlevel_init.S
+index 1f9a0e9..f95a65f 100644
+--- a/cpu/omap3/lowlevel_init.S
++++ b/cpu/omap3/lowlevel_init.S
+@@ -208,7 +208,7 @@ mpu_dpll_param:
+ /* ES1 */
+ .word 0x17D,0x0C,0x03,0x01
+ /* ES2 */
+-.word 0x1F4,0x0C,0x03,0x01
++.word 0x258,0x0C,0x03,0x01
+ /* 3410 */
+ .word 0x10A,0x0C,0x03,0x01
+ 
diff --git a/packages/u-boot/u-boot-git/beagleboard/mru-256.diff b/packages/u-boot/u-boot-git/beagleboard/mru-256.diff
new file mode 100644
index 0000000000..6099fe6c9d
--- /dev/null
+++ b/packages/u-boot/u-boot-git/beagleboard/mru-256.diff
@@ -0,0 +1,192 @@
+From: Mans Rullgard <mans@mansr.com>
+Date: Thu, 2 Oct 2008 01:25:35 +0000 (+0100)
+Subject: OMAP3: Beagleboard can have dual-chip RAM
+X-Git-Url: http://git.mansr.com/?p=u-boot;a=commitdiff_plain;h=ef6ee5af8d584bddadb2d45ad4320cef96b8a934;hp=caccdb772c3028a3e3e801fb1554788150752ffc
+
+OMAP3: Beagleboard can have dual-chip RAM
+
+Some Beagleboards are fitted with dual-chip RAM. Returning DDR_STACKED
+from get_mem_type() causes the second chip (on CS1) to be enabled.
+
+FIXME: need a better way to configure this.
+
+Signed-off-by: Mans Rullgard <mans@mansr.com>
+---
+
+diff --git a/cpu/omap3/board.c b/cpu/omap3/board.c
+index 804021f..f7cf289 100644
+--- a/cpu/omap3/board.c
++++ b/cpu/omap3/board.c
+@@ -265,15 +265,17 @@ int dram_init(void)
+ 	 * where it can be started.  Early init code will init
+ 	 * memory on CS0.
+ 	 */
+-	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED))
++	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
+ 		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
++		make_cs1_contiguous();
++	}
+ 
+ 	size0 = get_sdr_cs_size(SDRC_CS0_OSET);
+ 	size1 = get_sdr_cs_size(SDRC_CS1_OSET);
+ 
+ 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ 	gd->bd->bi_dram[0].size = size0;
+-	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + size0;
++	gd->bd->bi_dram[1].start = PHYS_SDRAM_1 + get_sdr_cs_offset(1);
+ 	gd->bd->bi_dram[1].size = size1;
+ 
+ 	return 0;
+diff --git a/cpu/omap3/mem.c b/cpu/omap3/mem.c
+index 955fa70..53687a5 100644
+--- a/cpu/omap3/mem.c
++++ b/cpu/omap3/mem.c
+@@ -114,12 +114,12 @@ void make_cs1_contiguous(void)
+  *             for a part. Helps in guessing which part
+  *             we are currently using.
+  *******************************************************/
+-u32 mem_ok(void)
++u32 mem_ok(u32 cs)
+ {
+ 	u32 val1, val2, addr;
+ 	u32 pattern = 0x12345678;
+ 
+-	addr = OMAP34XX_SDRC_CS0;
++	addr = OMAP34XX_SDRC_CS0 + get_sdr_cs_offset(cs);
+ 
+ 	__raw_writel(0x0, addr + 0x400);  /* clear pos A */
+ 	__raw_writel(pattern, addr);	  /* pattern to pos B */
+@@ -156,43 +156,40 @@ void sdrc_init(void)
+ 
+ void do_sdrc_init(u32 offset, u32 early)
+ {
++	u32 actim_offs = offset? 0x28: 0;
+ 
+-	/* reset sdrc controller */
+-	__raw_writel(SOFTRESET, SDRC_SYSCONFIG);
+-	wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
+-	__raw_writel(0, SDRC_SYSCONFIG);
++	if (early) {
++		/* reset sdrc controller */
++		__raw_writel(SOFTRESET, SDRC_SYSCONFIG);
++		wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
++		__raw_writel(0, SDRC_SYSCONFIG);
+ 
+-	/* setup sdrc to ball mux */
+-	__raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
++		/* setup sdrc to ball mux */
++		__raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
+ 
+-	/* SDRC_MCFG0 register */
+-	(*(unsigned int *) 0x6D000080) = 0x02584099; /* from Micron */
++		/* Disble Power Down of CKE cuz of 1 CKE on combo part */
++		__raw_writel(0x00000081, SDRC_POWER);
+ 
+-	/* SDRC_RFR_CTRL0 register */
+-	(*(unsigned int *) 0x6D0000a4) = 0x54601;    /* for 166M */
++		__raw_writel(0x0000A, SDRC_DLLA_CTRL);
++		sdelay(0x20000);
++	}
+ 
+-	/* SDRC_ACTIM_CTRLA0 register */
+-	(*(unsigned int *) 0x6D00009c) = 0xa29db4c6; /* for 166M */
++	__raw_writel(0x02584099,	SDRC_MCFG_0 + offset);
++	__raw_writel(0x4e201,		SDRC_RFR_CTRL + offset);
++	__raw_writel(0xaa9db4c6,	SDRC_ACTIM_CTRLA_0 + actim_offs);
++	__raw_writel(0x11517,		SDRC_ACTIM_CTRLB_0 + actim_offs);
+ 
+-	/* SDRC_ACTIM_CTRLB0 register */
+-	(*(unsigned int *) 0x6D0000a0) = 0x12214;    /* for 166M */
++	__raw_writel(CMD_NOP,		SDRC_MANUAL_0 + offset);
++	__raw_writel(CMD_PRECHARGE,	SDRC_MANUAL_0 + offset);
++	__raw_writel(CMD_AUTOREFRESH,	SDRC_MANUAL_0 + offset);
++	__raw_writel(CMD_AUTOREFRESH,	SDRC_MANUAL_0 + offset);
+ 
+-	/* Disble Power Down of CKE cuz of 1 CKE on combo part */
+-	(*(unsigned int *) 0x6D000070) = 0x00000081;
++	/*  CAS latency 3, Write Burst = Read Burst, Serial Mode,
++	    Burst length = 4 */
++	__raw_writel(0x00000032,	SDRC_MR_0 + offset);
+ 
+-	/* SDRC_Manual command register */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000000; /* NOP command */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000001; /* Precharge command */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000002; /* Auto-refresh command */
+-	(*(unsigned int *) 0x6D0000a8) = 0x00000002; /* Auto-refresh command */
+-
+-	/* SDRC MR0 register */
+-	(*(int *) 0x6D000084) = 0x00000032;	/*  Burst length = 4 */
+-	/* CAS latency = 3, Write Burst = Read Burst Serial Mode */
+-
+-	/* SDRC DLLA control register */
+-	(*(unsigned int *) 0x6D000060) = 0x0000A;
+-	sdelay(0x20000);
++	if (!mem_ok(offset))
++		__raw_writel(0, SDRC_MCFG_0 + offset);
+ }
+ 
+ void enable_gpmc_config(u32 *gpmc_config, u32 gpmc_base, u32 base, u32 size)
+diff --git a/cpu/omap3/sys_info.c b/cpu/omap3/sys_info.c
+index 12cf5ba..64d9e7e 100644
+--- a/cpu/omap3/sys_info.c
++++ b/cpu/omap3/sys_info.c
+@@ -90,8 +90,11 @@ u32 is_mem_sdr(void)
+  ***********************************************************/
+ u32 get_mem_type(void)
+ {
+-	/* Current SDP3430 uses 2x16 MDDR Infenion parts */
++#ifdef CONFIG_OMAP3_BEAGLE
++	return DDR_STACKED;
++#else
+ 	return DDR_DISCRETE;
++#endif
+ }
+ 
+ /***********************************************************************
+@@ -109,6 +112,22 @@ u32 get_sdr_cs_size(u32 offset)
+ }
+ 
+ /***********************************************************************
++ * get_sdr_cs_offset() - get offset of cs from cs0 start
++ ************************************************************************/
++u32 get_sdr_cs_offset(u32 cs)
++{
++	u32 offset;
++
++	if (!cs)
++		return 0;
++
++	offset = __raw_readl(SDRC_CS_CFG);
++	offset = (offset & 15) << 27 | (offset & 0x30) >> 17;
++
++	return offset;
++}
++
++/***********************************************************************
+  * get_board_type() - get board type based on current production stats.
+  *  - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info.
+  *    when they are available we can get info from there.  This should
+diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h
+index d47defb..df2d150 100644
+--- a/include/asm-arm/arch-omap3/cpu.h
++++ b/include/asm-arm/arch-omap3/cpu.h
+@@ -123,7 +123,6 @@
+ #define SDRC_ACTIM_CTRLA_1	(OMAP34XX_SDRC_BASE+0xC4)
+ #define SDRC_ACTIM_CTRLB_1	(OMAP34XX_SDRC_BASE+0xC8)
+ #define SDRC_RFR_CTRL		(OMAP34XX_SDRC_BASE+0xA4)
+-#define SDRC_RFR_CTRL		(OMAP34XX_SDRC_BASE+0xA4)
+ #define SDRC_MANUAL_0		(OMAP34XX_SDRC_BASE+0xA8)
+ #define OMAP34XX_SDRC_CS0	0x80000000
+ #define OMAP34XX_SDRC_CS1	0xA0000000
+diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h
+index 279bdce..5b0bd9e 100644
+--- a/include/asm-arm/arch-omap3/sys_proto.h
++++ b/include/asm-arm/arch-omap3/sys_proto.h
+@@ -50,6 +50,7 @@ u32 get_gpmc0_width(void);
+ u32 get_board_type(void);
+ void display_board_info(u32);
+ u32 get_sdr_cs_size(u32 offset);
++u32 get_sdr_cs_offset(u32 cs);
+ u32 running_in_sdram(void);
+ u32 running_in_sram(void);
+ u32 running_in_flash(void);
diff --git a/packages/u-boot/u-boot-omap3_git.bb b/packages/u-boot/u-boot-omap3_git.bb
new file mode 100644
index 0000000000..ce7c5b9433
--- /dev/null
+++ b/packages/u-boot/u-boot-omap3_git.bb
@@ -0,0 +1,19 @@
+require u-boot.inc
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/u-boot-omap3-git/${MACHINE}"
+
+SRCREV = "c492706ba046124333323273f6fc21123360cb50"
+
+PV = "2008.10-rc1+${PR}+git${SRCREV}"
+PR="r1"
+
+SRC_URI = "git://www.sakoman.net/git/u-boot-omap3.git;branch=common;protocol=git \
+          "
+
+UBOOT_MACHINE_beagleboard = "omap3_beagle_config"
+UBOOT_MACHINE_omap3evm = "omap3_evm_config"
+UBOOT_MACHINE_overo = "omap3_overo_config"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
diff --git a/packages/u-boot/u-boot_git.bb b/packages/u-boot/u-boot_git.bb
index a887c1641d..6131aa1e3b 100644
--- a/packages/u-boot/u-boot_git.bb
+++ b/packages/u-boot/u-boot_git.bb
@@ -3,19 +3,24 @@ PR="r18"
 
 SRCREV_davinci-sffsdr = "4b50cd12a3b3c644153c4cf393f4a4c12289e5aa"
 SRCREV_davinci-dvevm = "4b50cd12a3b3c644153c4cf393f4a4c12289e5aa"
-SRCREV_beagleboard = "9c1c36409b2cb4e81aab0bd9d0a69c68f4475aae"
+SRCREV_beagleboard = "fb479d0418bc7c15d63a131beedbc6f1970fc295"
+SRCREV_omap3evm = "9c1c36409b2cb4e81aab0bd9d0a69c68f4475aae"
 SRCREV_neuros-osd2 = "df6de5f4ff79dc43ba2a79a3afa975d22ec273b5"
 SRCREV_akita = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
 SRCREV_spitz = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
 SRCREV_c7x0 = "9bf86baaa3b35b25baa2d664e2f7f6cafad689ee"
 
+UBOOT_MACHINE_beagleboard = "omap3_beagle_config"
+UBOOT_MACHINE_omap3evm = "omap3_evm_config"
+UBOOT_MACHINE_overo = "omap3_overo_config"
+
 SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git "
 SRC_URI_sequoia = "git://www.denx.de/git/u-boot.git;protocol=git;tag=cf3b41e0c1111dbb865b6e34e9f3c3d3145a6093 "
 SRC_URI_neuros-osd2 = "git://git.neurostechnology.com/git/u-boot;protocol=git;branch=neuros"
-SRC_URI_beagleboard = "git://www.sakoman.net/git/u-boot-omap3.git;branch=test;protocol=git \
-                       file://name.patch;patch=1 \
-                       file://armv7-a.patch;patch=1 \
-                      "
+SRC_URI_beagleboard = "git://www.sakoman.net/git/u-boot-omap3.git;branch=common;protocol=git \
+                       file://beagle-600MHz.diff;patch=1 \
+		       file://mru-256.diff;patch=1 \
+		       "
 
 SRC_URI_neuros-osd2 += "file://Makefile-fix.patch;patch=1"
 SRC_URI_append_akita = "file://pdaXrom-u-boot.patch;patch=1 \
diff --git a/packages/xorg-driver/xf86-video-omapfb_git.bb b/packages/xorg-driver/xf86-video-omapfb_git.bb
index c116f64483..b222ef8fef 100644
--- a/packages/xorg-driver/xf86-video-omapfb_git.bb
+++ b/packages/xorg-driver/xf86-video-omapfb_git.bb
@@ -2,10 +2,13 @@ require xorg-driver-video.inc
 
 DESCRIPTION = "X.Org X server -- OMAP display driver"
 
-SRCREV = "eb05e4446877409b349d8f9ede35052cc7a3432b"
+PR ="r3"
+
+SRCREV = "afb03099adc621fa7857a9bf26342d6380cbc2eb"
 PV = "0.0.1+${PR}+git${SRCREV}"
 
 SRC_URI = "git://git.pingu.fi/xf86-video-omapfb.git;protocol=http"
 
 S = "${WORKDIR}/git"
 
+CFLAGS += " -I${STAGING_INCDIR}/xorg "