ixp4xx-kernel: clean up maclist code in 2.6.15

ixp400-eth: merge clean up to maclist_read in 1.5
 - maclist_read is now (void), it always succeeds

4 files changed, 308 insertions, 112 deletions

diff --git a/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch b/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch
index 471967fc68..e23eaf5f2b 100644
--- a/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch
+++ b/packages/ixp425-eth/ixp400-eth-1.5/mac-address.patch
@@ -1,3 +1,8 @@
+Patch to use maclist - get the MAC to use from the board level
+MAC repository based on the device portId.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+
 --- ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
 +++ ixp400-eth/ixp400_eth.c	1970-01-01 00:00:00.000000000 +0000
 @@ -23,10 +23,10 @@
@@ -32,7 +37,7 @@
  #endif
  
  #ifndef CONFIG_IXP400_NAPI
-@@ -621,21 +624,6 @@ static phy_cfg_t default_phy_cfg[] =
+@@ -614,21 +617,6 @@ static phy_cfg_t default_phy_cfg[] =
  #endif
  };
  
@@ -54,7 +59,7 @@
  /* Default mapping of  NpeImageIds for EthAcc Ports 
   * Default is 
   *   IX_ETH_PORT_1 -> IX_ETH_NPE_B
-@@ -3337,28 +3325,13 @@ static int __devinit dev_eth_probe(struc
+@@ -3325,28 +3313,10 @@ static int __devinit dev_eth_probe(struc
  
      /* Defines the unicast MAC address
       *
@@ -70,10 +75,7 @@
 -     *
 +     * The code reads from the maclist API.
       */
-+    if (maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id) ||
-+		    !is_valid_ether_addr(ndev->dev_addr))
-+	    random_ether_addr(ndev->dev_addr);
- 
+-
 -    memcpy(ndev->dev_addr, 
 -	   &default_mac_addr[priv->port_id].macAddress,
 -	   IX_IEEE803_MAC_ADDRESS_SIZE);
@@ -84,11 +86,12 @@
 -    if (is_valid_ether_addr(ndev->dev_addr))
 -    {
 -	P_WARN("Use default MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
++    maclist_read((u8(*)[6])&ndev->dev_addr, priv->port_id);
 +    P_INFO("Use MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x for port %d\n",
  	       (unsigned)ndev->dev_addr[0],
  	       (unsigned)ndev->dev_addr[1],
  	       (unsigned)ndev->dev_addr[2],
-@@ -3366,7 +3339,6 @@ static int __devinit dev_eth_probe(struc
+@@ -3354,7 +3324,6 @@ static int __devinit dev_eth_probe(struc
  	       (unsigned)ndev->dev_addr[4],
  	       (unsigned)ndev->dev_addr[5],
  	       priv->port_id);
@@ -96,7 +99,7 @@
      
      /* Set/update the internal packet size 
       * This can be overriden later by the command
-@@ -3584,12 +3556,15 @@ static int __init ixp400_eth_init(void)
+@@ -3562,12 +3531,15 @@ static int __init ixp400_eth_init(void)
  
      TRACE;
  
diff --git a/packages/ixp425-eth/ixp400-eth_1.5.bb b/packages/ixp425-eth/ixp400-eth_1.5.bb
index 8833b850ec..e54077460b 100644
--- a/packages/ixp425-eth/ixp400-eth_1.5.bb
+++ b/packages/ixp425-eth/ixp400-eth_1.5.bb
@@ -4,7 +4,7 @@
 MAINTAINER = "NSLU2 Linux <nslu2-linux@yahoogroups.com>"
 HOMEPAGE = "http://www.intel.com/design/network/products/npfamily/ixp420.htm"
 LICENSE = "GPL"
-PR = "r7"
+PR = "r8"
 
 DEPENDS = "ixp4xx-csr"
 RDEPENDS = "ixp4xx-csr"
diff --git a/packages/linux/ixp4xx-kernel/2.6.15/91-maclist.patch b/packages/linux/ixp4xx-kernel/2.6.15/91-maclist.patch
index 27af1ea639..72b9fa9a7d 100644
--- a/packages/linux/ixp4xx-kernel/2.6.15/91-maclist.patch
+++ b/packages/linux/ixp4xx-kernel/2.6.15/91-maclist.patch
@@ -1,32 +1,55 @@
---- linux-2.6.15/include/net/maclist.h	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/include/net/maclist.h	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,23 @@
-+#ifndef _MACLIST_H
-+#define _MACLIST_H 1
-+/*
-+ * Interfaces to the MAC repository
-+ */
-+/*
-+ * Add a single entry, returns 0 on success else an error
-+ * code.  Must *not* be called from an interrupt handler.
-+ */
-+extern int maclist_add(const u8 id_to_add[6]);
-+
-+/*
-+ * Return the current entry count (valid in any context).
-+ */
-+extern int maclist_count(void);
-+
-+/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
-+ */
-+extern int maclist_read(u8 (*buffer_for_id)[6], int index_of_id_to_return);
+Ethernet MAC repository.
+
+Some ethernet controllers have no built-in way of obtaining an
+appropriate Ethernet MAC address.  Such controllers have to be
+initialised in a board-specific way, depending on how the allocated
+MAC is stored.  The MAC repository provides a set of APIs and a
+proc entry (/proc/net/maclist) to store MAC values from the board
+so that such drivers can obtain a MAC address without board-specific
+code.
+
+Signed-off-by: John Bowler <jbowler@acm.org>
+
+diff -rup linux-2.6.15.1/.pc/91-maclist.patch/drivers/net/Kconfig linux-2.6.15.1/drivers/net/Kconfig
+--- linux-2.6.15/drivers/net/Kconfig	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/net/Kconfig	1970-01-01 00:00:00.000000000 +0000
+@@ -166,6 +166,21 @@ config NET_ETHERNET
+ 	  kernel: saying N will just cause the configurator to skip all
+ 	  the questions about Ethernet network cards. If unsure, say N.
+ 
++config MACLIST
++	tristate "Ethernet MAC repository"
++	depends on NET_ETHERNET
++	help
++	  Some ethernet controllers have no built-in way of obtaining an
++	  appropriate Ethernet MAC address.  Such controllers have to be
++	  initialised in a board-specific way, depending on how the allocated
++	  MAC is stored.  The MAC repository provides a set of APIs and a
++	  proc entry (/proc/net/maclist) to store MAC values from the board
++	  so that such drivers can obtain a MAC address without board-specific
++	  code.  You do not need to enable this device - it will be selected
++	  automatically by any device which requires it.  It is only useful
++	  to enable it manually when building a device driver independently
++	  of the kernel build.
 +
-+#endif /*_MACLIST_H*/
+ config MII
+ 	tristate "Generic Media Independent Interface device support"
+ 	depends on NET_ETHERNET
+diff -rup linux-2.6.15.1/.pc/91-maclist.patch/drivers/net/Makefile linux-2.6.15.1/drivers/net/Makefile
+--- linux-2.6.15/drivers/net/Makefile	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/drivers/net/Makefile	1970-01-01 00:00:00.000000000 +0000
+@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
+ # end link order section
+ #
+ 
++obj-$(CONFIG_MACLIST) += maclist.o
+ obj-$(CONFIG_MII) += mii.o
+ obj-$(CONFIG_PHYLIB) += phy/
+ 
+diff -rup linux-2.6.15.1/.pc/91-maclist.patch/drivers/net/maclist.c linux-2.6.15.1/drivers/net/maclist.c
 --- linux-2.6.15/drivers/net/maclist.c	1970-01-01 00:00:00.000000000 +0000
 +++ linux-2.6.15/drivers/net/maclist.c	1970-01-01 00:00:00.000000000 +0000
-@@ -0,0 +1,314 @@
+@@ -0,0 +1,465 @@
 +/*
 + * drivers/net/maclist.c
 + *
@@ -55,15 +78,70 @@
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License
 + * version 2 as published by the Free Software Foundation.
-+ *
++ */
++
++/*
 + * External interfaces:
 + *  Interfaces to linux kernel (and modules)
-+ *   maclist_add:   add a single MAC
++ *   maclist_add:   add a single MAC, sequenced with a single
++ *                  writer lock (reads may happen simultaneously
++ *                  because of the way the list is built)
 + *   maclist_count: total number of MACs stored
-+ *   maclist_read:  read a MAC 0..(maclist_count-1)
++ *   maclist_read:  read a MAC 0..(maclist_count-1).  Call this
++ *                  to get a specific MAC.  If the argument is
++ *                  a new key and all the allocaed MACs have been
++ *                  assigned a random but valid MAC will be return
++ *                  (and this will be stored for later retrieval
++ *                  under the given key.)
++ *
++ * Sequencing:
++ *  The MAC ids must be added before any driver tries to use them
++ *  (this is obvious isn't it?)  This can be made to happen by
++ *  sequencing the initcalls correctly.  The module or kernel
++ *  parameters have been handled before any init call happens.
++ *  The important trick here is to ensure that the platform
++ *  initialises any devices with MAC ids *before* any devices
++ *  which might use them.
++ *
++ *  When this code is a module any other module which adds a
++ *  MAC should be modprobed before modules for ethernet
++ *  devices.
++ *
++ *  The failure case is 'soft' - the device will get a valid, but
++ *  random, MAC and the real allocated MACs will never get used.
++ *  This can be seen by looking at the list of ids in sysfs (there
++ *  will be extra, random, ones after the allocated ones).
++ *
++ * Recommendations:
++ *  For ethernet drivers which are known to be the sole driver on
++ *  the board (without a built in MAC) and where the number of
++ *  devices driven is known simply use an index 0..(n-1) as a
++ *  key for each of the n devices.
++ *
++ *  This is the common case, it works where one driver handles
++ *  multiple devices so long as the total number of devices can
++ *  be determined reliably.  It is sufficient merely to maintain
++ *  a global count of the number of devices initialised so far,
++ *  just so long as the initialisation order is consistent.
++ *
++ *  When the driver is generic and the board may be populated with
++ *  other devices which allocate MACs from the maclist pool and
++ *  use different drivers create a random key and compile this into
++ *  the code.  Use this as the base for all devices from the driver
++ *  (using a global device count for this driver if necessary).
++ *
++ *  With the second strategy the assignment of MACs will depend on
++ *  the order of initialisation of the different drivers.  To avoid
++ *  this provide a kernel (or module) command line parameter to
++ *  specify a base index and (optional) count for each driver or
++ *  pass in a (struct resource) with the start and end of the keys
++ *  to pass to maclist_read.  Either method allows the higher levels
++ *  (boot loader or machine description) to specify which MACs in
++ *  the list to assign to each device.
 + */
 +#include <linux/module.h>
 +#include <linux/moduleparam.h>
++#include <linux/spinlock.h>
 +#include <linux/etherdevice.h>
 +#include <linux/proc_fs.h>
 +#include <linux/errno.h>
@@ -78,22 +156,27 @@
 +
 +typedef struct maclist_entry {
 +	struct maclist_entry *next;  /* Linked list, first first */
++	u32                   key;   /* count or key for this entry */
++	u16                   flags;
 +	u8                    id[6]; /* 6 byte Ethernet MAC */
 +} maclist_entry_t;
 +
-+/* Access to this list is possible at any time - entries in
-+ * the list are never destroyed.  Modification of the list is
-+ * safe only from the init code (i.e. modification must be
-+ * single threaded), but read from an interrupt at the same
-+ * time is possible and safe.
++/*
++ * flag definitions
 + */
++#define MACLIST_ALLOCATED 1
++#define MACLIST_RANDOM    2
++
++/* Access to this list is protected by a standard rwlock_t. */
 +static maclist_entry_t *maclist_list = 0;
 +
++static DEFINE_RWLOCK(maclist_lock);
++
 +/*
 + * External interfaces.
 + *
 + * Add a single entry, returns 0 on success else an error
-+ * code.  Must be single threaded.
++ * code.  Checks for invalid addresses.
 + */
 +int maclist_add(const u8 new_id[6]) {
 +	maclist_entry_t *new_entry, **tail;
@@ -105,21 +188,27 @@
 +	new_entry = kmalloc(sizeof *new_entry, GFP_KERNEL);
 +	if (new_entry == 0)
 +		return -ENOMEM;
-+	new_entry->next = 0;
++	new_entry->next  = 0;
++	new_entry->key   = 0;
++	new_entry->flags = 0;
 +	memcpy(new_entry->id, new_id, sizeof new_entry->id);
 +
 +	tail = &maclist_list;
++
++	write_lock(&maclist_lock);
 +	while (*tail != 0)
 +		tail = &(*tail)->next;
 +	*tail = new_entry;
++	write_unlock(&maclist_lock);
++
 +	return 0;
 +}
 +EXPORT_SYMBOL(maclist_add);
 +
 +/*
-+ * Return the current entry count (valid in any context).
++ * Return the current entry count.
 + */
-+int maclist_count(void) {
++static int maclist_count_unlocked(void) {
 +	maclist_entry_t *tail = maclist_list;
 +	int count = 0;
 +
@@ -130,27 +219,73 @@
 +
 +	return count;
 +}
++
++int maclist_count(void) {
++	int count;
++
++	read_lock(&maclist_lock);
++		count = maclist_count_unlocked();
++	read_unlock(&maclist_lock);
++
++	return count;
++}
 +EXPORT_SYMBOL(maclist_count);
 +
 +/*
-+ * Return the ID from the n'th entry (valid in any context),
-+ * returns 0 on success, -EINVAL if 'n' is out of range.
++ * Return the ID with the given key (the key is allocated
++ * to an entry if not found).
 + */
-+int maclist_read(u8 (*id)[6], int n) {
-+	maclist_entry_t *entry = maclist_list;
-+
-+	while (n > 0 && entry != 0) {
-+		--n;
-+		entry = entry->next;
-+	}
++void maclist_read(u8 (*id)[6], u32 key) {
++	int              count, index;
++	maclist_entry_t *entry, *entry_to_allocate;
++	
++	/* Do this under a write lock to avoid the SMP race
++	 * where we find the key isn't assigned, drop the lock,
++	 * have another CPU assign it, then assign it on this
++	 * CPU too - very bad...
++	 */
++	write_lock(&maclist_lock);
++		count             = maclist_count_unlocked();
++		index             = key % count; /* index of entry to allocate */
++		entry_to_allocate = 0;
++
++		entry = maclist_list;
++		while (entry != 0) {
++			if ((entry->flags & MACLIST_ALLOCATED) != 0) {
++				if (entry->key == key) {
++					/* Found it, use this entry. */
++					entry_to_allocate = entry;
++					break;
++				}
++			} else if (entry_to_allocate == 0 || count <= index) {
++				/* The algorithm is to try for entry
++				 * (key % count), but if this isn't possible
++				 * return the prior unallocated entry.
++				 */
++				entry_to_allocate = entry;
++			}
++
++			++count;
++			entry = entry->next;
++		}
 +
-+	if (n == 0 && entry != 0) {
-+		memcpy(id, entry->id, sizeof *id);
-+		return 0;
++		/* Use entry_to_allocate, allocating it if necessary. */
++		if (entry_to_allocate != 0) {
++			if ((entry_to_allocate->flags & MACLIST_ALLOCATED) == 0) {
++				entry_to_allocate->key = key;
++				entry_to_allocate->flags |= MACLIST_ALLOCATED;
++			}
++			memcpy(id, entry_to_allocate->id, sizeof *id);
++		}
++	write_unlock(&maclist_lock);
++
++	if (entry_to_allocate == 0) {
++		/* No unallocated entries.  Make a new one and return it. */
++		printk(KERN_INFO MACLIST_NAME ": adding random MAC for key 0x%x\n", key);
++		random_ether_addr(*id);
++		if (maclist_add(*id) == 0)
++			maclist_read(id, key);
 +	}
-+
-+	printk(KERN_ERR MACLIST_NAME ": id does not exist\n");
-+	return -EINVAL;
 +}
 +EXPORT_SYMBOL(maclist_read);
 +
@@ -159,7 +294,7 @@
 + * addresses, comma separated.  (The parsing really should
 + * be somewhere central...)
 + */
-+static int __init maclist_setup(char *param) {
++static int __init maclist_setup(const char *param) {
 +	int bytes = 0, seen_a_digit = 0;
 +	u8 id[6];
 +
@@ -213,7 +348,7 @@
 +
 +		if (bytes >= 12) {
 +			int rc = maclist_add(id);
-+			if (rc)
++			if (unlikely(rc))
 +				return rc;
 +			bytes = 0;
 +			seen_a_digit = 0;
@@ -227,10 +362,7 @@
 +	return 0;
 +}
 +
-+/*
-+ * procfs support, if compiled in.
-+ */
-+#ifdef CONFIG_PROC_FS
++#if (defined CONFIG_PROC_FS) || (defined MODULE)
 +/*
 + * Character device read
 + */
@@ -258,8 +390,13 @@
 +	default: return ':';
 +	}
 +}
++#endif
 +
 +/*
++ * procfs support, if compiled in.
++ */
++#ifdef CONFIG_PROC_FS
++/*
 + * The extensively undocumented proc_read_t callback is implemented here.
 + * Go look in fs/proc/generic.c:
 + *
@@ -300,6 +437,49 @@
 +#endif
 +
 +/*
++ * set works once, at init time (the param is set to 0444 below),
++ * get works any time.
++ */
++static int param_set_maclist(const char *val, struct kernel_param *kp)
++{
++	if (maclist_list == 0)
++		return maclist_setup(val);
++
++	printk(KERN_ERR MACLIST_NAME ": call to set parameters too late\n");
++	return -EINVAL;
++}
++
++static int param_get_maclist(char *buffer, struct kernel_param *kp)
++{
++#ifdef MODULE
++	off_t offset = 0;
++
++	/* buffer is only 4k! */
++	while (offset < 4096) {
++		int ch = maclist_getchar(offset++);
++		if (ch < 0) {
++			*buffer = 0;
++			return 0;
++		}
++		*buffer++ = ch;
++	}
++
++	*--buffer = 0;
++	return -ENOMEM;
++#else
++	return -EINVAL;
++#endif
++}
++
++/*
++ * module: the argument is ids=mac,mac,mac
++ * kernel command line: maclist.ids=mac,mac,mac
++ */
++#define param_check_maclist(name, p) __param_check(name, p, maclist_entry_t*)
++module_param_named(ids, maclist_list, maclist, 0444);
++MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
++
++/*
 + * Finally, the init/exit functions.
 + */
 +static void __exit maclist_exit(void)
@@ -308,8 +488,10 @@
 +
 +	remove_proc_entry(MACLIST_NAME, proc_net);
 +
-+	list = maclist_list;
-+	maclist_list = 0;
++	write_lock(&maclist_lock);
++		list = maclist_list;
++		maclist_list = 0;
++	write_unlock(&maclist_lock);
 +
 +	while (list != 0) {
 +		maclist_entry_t *head = list;
@@ -318,14 +500,6 @@
 +	}
 +}
 +
-+#ifdef MODULE
-+static char ids[256];
-+module_param_string(ids, ids, sizeof ids, 0);
-+MODULE_PARM_DESC(ids, "comma separated list of MAC ids\n");
-+#else
-+__setup("maclist_ids=", maclist_setup);
-+#endif
-+
 +static int __init maclist_init(void)
 +{
 +#	ifdef MODULE
@@ -341,37 +515,56 @@
 +
 +module_init(maclist_init);
 +module_exit(maclist_exit);
---- linux-2.6.15/drivers/net/Makefile	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Makefile	1970-01-01 00:00:00.000000000 +0000
-@@ -70,6 +70,7 @@ obj-$(CONFIG_RIONET) += rionet.o
- # end link order section
- #
- 
-+obj-$(CONFIG_MACLIST) += maclist.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
- 
---- linux-2.6.15/drivers/net/Kconfig	1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.15/drivers/net/Kconfig	1970-01-01 00:00:00.000000000 +0000
-@@ -166,6 +166,21 @@ config NET_ETHERNET
- 	  kernel: saying N will just cause the configurator to skip all
- 	  the questions about Ethernet network cards. If unsure, say N.
- 
-+config MACLIST
-+	tristate "Ethernet MAC repository"
-+	depends on NET_ETHERNET
-+	help
-+	  Some ethernet controllers have no built-in way of obtaining an
-+	  appropriate Ethernet MAC address.  Such controllers have to be
-+	  initialised in a board-specific way, depending on how the allocated
-+	  MAC is stored.  The MAC repository provides a set of APIs and a
-+	  proc entry (/proc/net/maclist) to store MAC values from the board
-+	  so that such drivers can obtain a MAC address without board-specific
-+	  code.  You do not need to enable this device - it will be selected
-+	  automatically by any device which requires it.  It is only useful
-+	  to enable it manually when building a device driver independently
-+	  of the kernel build.
+diff -rup linux-2.6.15.1/.pc/91-maclist.patch/include/net/maclist.h linux-2.6.15.1/include/net/maclist.h
+--- linux-2.6.15/include/net/maclist.h	1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.15/include/net/maclist.h	1970-01-01 00:00:00.000000000 +0000
+@@ -0,0 +1,49 @@
++#ifndef _MACLIST_H
++#define _MACLIST_H 1
++/*
++ * Interfaces to the MAC repository
++ *
++ * Copyright (C) 2005 John Bowler
++ * Author: John Bowler <jbowler@acm.org>
++ * Maintainers: http://www.nslu2-linux.org/
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ */
 +
- config MII
- 	tristate "Generic Media Independent Interface device support"
- 	depends on NET_ETHERNET
++/*
++ * Add a single entry, returns 0 on success else an error
++ * code.  Allocates memory, claims and releases a write
++ * lock.
++ */
++extern int maclist_add(const u8 id_to_add[6]);
++
++/*
++ * Return the current entry count, claims and releases a
++ * read lock.
++ */
++extern int maclist_count(void);
++
++/*
++ * Return the ID from the given entry.  Always succeeds.
++ * Claims and releases a write lock.
++ *
++ * If any entry has not been allocated for this key one
++ * is allocated.  If there are no remaining unallocated
++ * entries a new one is created.
++ *
++ * If the value of the key is less than maclist_count()
++ * the entry indexed by the key (i.e. for key 'n' the
++ * n'th entry starting at 0) will be returned if available.
++ * Otherwise the entry to be returned will be unpredictable
++ * but consistent for a given value of maclist_count().
++ */
++extern void maclist_read(u8 (*buffer_for_id)[6],
++		u32 key_of_entry_to_return);
++
++/*
++ * See the implementation in drivers/net/maclist.c for
++ * more information.
++ */
++#endif /*_MACLIST_H*/
diff --git a/packages/linux/ixp4xx-kernel_2.6.15.1.bb b/packages/linux/ixp4xx-kernel_2.6.15.1.bb
index add6718b1b..f9d08c0390 100644
--- a/packages/linux/ixp4xx-kernel_2.6.15.1.bb
+++ b/packages/linux/ixp4xx-kernel_2.6.15.1.bb
@@ -8,7 +8,7 @@ PR_CONFIG = "0"
 # Increment the number below (i.e. the digits after PR) when
 # making changes within this file or for changes to the patches
 # applied to the kernel.
-PR = "r14.${PR_CONFIG}"
+PR = "r15.${PR_CONFIG}"
 
 include ixp4xx-kernel.inc