summaryrefslogtreecommitdiff
path: root/packages
diff options
context:
space:
mode:
authorMarcin Juszkiewicz <hrw@openembedded.org>2007-05-07 17:34:46 +0000
committerMarcin Juszkiewicz <hrw@openembedded.org>2007-05-07 17:34:46 +0000
commit6a03b70703bd0f335b9709c0b2386858f7b82291 (patch)
treeac9e78a0d874b8f1beb3475a8cdcea75bb72c9ca /packages
parent840675f5036042778054dab3cc0d138874877d73 (diff)
linux 2.6.20: drop Simpad and Progear support
Diffstat (limited to 'packages')
-rw-r--r--packages/linux/linux/progear/progear_bl-r6.patch200
-rw-r--r--packages/linux/linux/simpad/linux-2.6.20.SIMpad-mq200.patch2303
-rw-r--r--packages/linux/linux/simpad/linux-2.6.20.SIMpad-ucb1x00-switches.patch189
-rw-r--r--packages/linux/linux_2.6.20.bb11
4 files changed, 1 insertions, 2702 deletions
diff --git a/packages/linux/linux/progear/progear_bl-r6.patch b/packages/linux/linux/progear/progear_bl-r6.patch
deleted file mode 100644
index 6ac01714b7..0000000000
--- a/packages/linux/linux/progear/progear_bl-r6.patch
+++ /dev/null
@@ -1,200 +0,0 @@
-From: Marcin Juszkiewicz <openembedded@hrw.one.pl>
-
-Add control of LCD backlight for Frontpath ProGear HX1050+.
-Patch is based on http://downloads.sf.net/progear/progear-lcd-0.2.tar.gz
-driver by M Schacht.
-
-Signed-Off-By: Marcin Juszkiewicz <openembedded@hrw.one.pl>
-
----
-Patch follow kernel version 2.6.20
-
- Kconfig | 8 +++
- Makefile | 1
- progear_bl.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 163 insertions(+)
-
-Index: git/drivers/video/backlight/Kconfig
-===================================================================
---- git.orig/drivers/video/backlight/Kconfig 2006-12-29 17:31:36.511043439 +0100
-+++ git/drivers/video/backlight/Kconfig 2007-02-07 08:57:31.020095845 +0100
-@@ -66,3 +66,11 @@
- If you have a HP Jornada 680, say y to enable the
- backlight driver.
-
-+config BACKLIGHT_PROGEAR
-+ tristate "Frontpath ProGear Backlight Driver"
-+ depends on BACKLIGHT_DEVICE && PCI && X86
-+ default y
-+ help
-+ If you have a Frontpath ProGear say Y to enable the
-+ backlight driver.
-+
-Index: git/drivers/video/backlight/progear_bl.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/drivers/video/backlight/progear_bl.c 2007-02-07 08:55:46.813993140 +0100
-@@ -0,0 +1,154 @@
-+/*
-+ * Backlight Driver for Frontpath ProGear HX1050+
-+ *
-+ * Copyright (c) 2006 Marcin Juszkiewicz
-+ *
-+ * Based on Progear LCD driver by M Schacht
-+ * <mschacht at alumni dot washington dot edu>
-+ *
-+ * Based on Sharp's Corgi Backlight Driver
-+ * Based on Backlight Driver for HP Jornada 680
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/fb.h>
-+#include <linux/backlight.h>
-+#include <linux/pci.h>
-+#include <asm/uaccess.h>
-+
-+#define PMU_LPCR 0xB0
-+#define SB_MPS1 0x61
-+#define HW_LEVEL_MAX 0x77
-+#define HW_LEVEL_MIN 0x4f
-+
-+static struct pci_dev *pmu_dev = NULL;
-+static struct pci_dev *sb_dev = NULL;
-+
-+static int progearbl_set_intensity(struct backlight_device *bd)
-+{
-+ int intensity = bd->props->brightness;
-+
-+ if (bd->props->power != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+ if (bd->props->fb_blank != FB_BLANK_UNBLANK)
-+ intensity = 0;
-+
-+ pci_write_config_byte(pmu_dev, PMU_LPCR, intensity + HW_LEVEL_MIN);
-+
-+ return 0;
-+}
-+
-+static int progearbl_get_intensity(struct backlight_device *bd)
-+{
-+ u8 intensity;
-+ pci_read_config_byte(pmu_dev, PMU_LPCR, &intensity);
-+
-+ return intensity - HW_LEVEL_MIN;
-+}
-+
-+static struct backlight_properties progearbl_data = {
-+ .owner = THIS_MODULE,
-+ .get_brightness = progearbl_get_intensity,
-+ .update_status = progearbl_set_intensity,
-+};
-+
-+static int progearbl_probe(struct platform_device *pdev)
-+{
-+ u8 temp;
-+ struct backlight_device *progear_backlight_device;
-+
-+ pmu_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, 0);
-+ if (!pmu_dev) {
-+ printk("ALI M7101 PMU not found.\n");
-+ return -ENODEV;
-+ }
-+
-+ sb_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, 0);
-+ if (!sb_dev) {
-+ printk("ALI 1533 SB not found.\n");
-+ pci_dev_put(pmu_dev);
-+ return -ENODEV;
-+ }
-+
-+ /* Set SB_MPS1 to enable brightness control. */
-+ pci_read_config_byte(sb_dev, SB_MPS1, &temp);
-+ pci_write_config_byte(sb_dev, SB_MPS1, temp | 0x20);
-+
-+ progear_backlight_device = backlight_device_register("progear-bl",
-+ &pdev->dev, NULL,
-+ &progearbl_data);
-+ if (IS_ERR(progear_backlight_device))
-+ return PTR_ERR(progear_backlight_device);
-+
-+ platform_set_drvdata(pdev, progear_backlight_device);
-+
-+ progearbl_data.power = FB_BLANK_UNBLANK;
-+ progearbl_data.brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-+ progearbl_data.max_brightness = HW_LEVEL_MAX - HW_LEVEL_MIN;
-+ progearbl_set_intensity(progear_backlight_device);
-+
-+ return 0;
-+}
-+
-+static int progearbl_remove(struct platform_device *pdev)
-+{
-+ struct backlight_device *bd = platform_get_drvdata(pdev);
-+ backlight_device_unregister(bd);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver progearbl_driver = {
-+ .probe = progearbl_probe,
-+ .remove = progearbl_remove,
-+ .driver = {
-+ .name = "progear-bl",
-+ },
-+};
-+
-+static struct platform_device *progearbl_device;
-+
-+static int __init progearbl_init(void)
-+{
-+ int ret = platform_driver_register(&progearbl_driver);
-+
-+ if (!ret) {
-+ progearbl_device = platform_device_alloc("progear-bl", -1);
-+ if (!progearbl_device)
-+ return -ENOMEM;
-+
-+ ret = platform_device_add(progearbl_device);
-+
-+ if (ret) {
-+ platform_device_put(progearbl_device);
-+ platform_driver_unregister(&progearbl_driver);
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+static void __exit progearbl_exit(void)
-+{
-+ pci_dev_put(pmu_dev);
-+ pci_dev_put(sb_dev);
-+
-+ platform_device_unregister(progearbl_device);
-+ platform_driver_unregister(&progearbl_driver);
-+}
-+
-+module_init(progearbl_init);
-+module_exit(progearbl_exit);
-+
-+MODULE_AUTHOR("Marcin Juszkiewicz <linux@hrw.one.pl>");
-+MODULE_DESCRIPTION("ProGear Backlight Driver");
-+MODULE_LICENSE("GPL");
-Index: git/drivers/video/backlight/Makefile
-===================================================================
---- git.orig/drivers/video/backlight/Makefile 2006-12-29 17:31:36.511043439 +0100
-+++ git/drivers/video/backlight/Makefile 2007-02-06 21:34:54.503712923 +0100
-@@ -5,3 +5,4 @@
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
-+obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad-mq200.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad-mq200.patch
deleted file mode 100644
index 841cf4566c..0000000000
--- a/packages/linux/linux/simpad/linux-2.6.20.SIMpad-mq200.patch
+++ /dev/null
@@ -1,2303 +0,0 @@
-diff -uNr linux-2.6.20.vanilla/drivers/video/Kconfig linux-2.6.20/drivers/video/Kconfig
---- linux-2.6.20.vanilla/drivers/video/Kconfig 2007-03-24 21:25:52.000000000 +0100
-+++ linux-2.6.20/drivers/video/Kconfig 2007-03-28 22:53:44.000000000 +0200
-@@ -1147,6 +1147,15 @@
- help
- If you have a S3 Trio say Y. Say N for S3 Virge.
-
-+config FB_MQ200
-+ bool "MQ200 Driver"
-+ depends on (FB = y) && ARM && ARCH_SA1100
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This is a MQ200 driver tested only on Siemens SIMpads.
-+
- config FB_SAVAGE
- tristate "S3 Savage support"
- depends on FB && PCI && EXPERIMENTAL
-diff -uNr linux-2.6.20.vanilla/drivers/video/Makefile linux-2.6.20/drivers/video/Makefile
---- linux-2.6.20.vanilla/drivers/video/Makefile 2007-03-24 21:25:52.000000000 +0100
-+++ linux-2.6.20/drivers/video/Makefile 2007-03-28 22:53:44.000000000 +0200
-@@ -30,6 +30,7 @@
- obj-$(CONFIG_FB_PM2) += pm2fb.o
- obj-$(CONFIG_FB_PM3) += pm3fb.o
-
-+obj-$(CONFIG_FB_MQ200) += mq200/
- obj-$(CONFIG_FB_MATROX) += matrox/
- obj-$(CONFIG_FB_RIVA) += riva/ vgastate.o
- obj-$(CONFIG_FB_NVIDIA) += nvidia/
-diff -uNr linux-2.6.20.vanilla/drivers/video/backlight/Kconfig linux-2.6.20/drivers/video/backlight/Kconfig
---- linux-2.6.20.vanilla/drivers/video/backlight/Kconfig 2007-03-24 21:25:53.000000000 +0100
-+++ linux-2.6.20/drivers/video/backlight/Kconfig 2007-03-28 22:53:44.000000000 +0200
-@@ -66,3 +66,10 @@
- If you have a HP Jornada 680, say y to enable the
- backlight driver.
-
-+config FB_MQ200_LCD
-+ bool "MQ200 LCD class implemetation"
-+ depends on SA1100_SIMPAD && LCD_DEVICE
-+
-+config FB_MQ200_BACKLIGHT
-+ bool "MQ200 Backlight class implementation"
-+ depends on SA1100_SIMPAD && BACKLIGHT_DEVICE
-diff -uNr linux-2.6.20.vanilla/drivers/video/backlight/Makefile linux-2.6.20/drivers/video/backlight/Makefile
---- linux-2.6.20.vanilla/drivers/video/backlight/Makefile 2007-03-24 21:25:53.000000000 +0100
-+++ linux-2.6.20/drivers/video/backlight/Makefile 2007-03-28 22:53:44.000000000 +0200
-@@ -5,3 +5,5 @@
- obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
- obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
- obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
-+obj-$(CONFIG_FB_MQ200_BACKLIGHT) += simpad_bl.o
-+obj-$(CONFIG_FB_MQ200_LCD) += simpad_lcd.o
-diff -uNr linux-2.6.20.vanilla/drivers/video/backlight/simpad_bl.c linux-2.6.20/drivers/video/backlight/simpad_bl.c
---- linux-2.6.20.vanilla/drivers/video/backlight/simpad_bl.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/backlight/simpad_bl.c 2007-03-28 22:53:44.000000000 +0200
-@@ -0,0 +1,109 @@
-+/*
-+ * GPLv2 <zecke@handhelds.org
-+ *
-+ * Implementation of the backlight_driver for
-+ * the mq200 framebuffer
-+ *
-+ * 2007/03/17 mrdata:
-+ * - small changes simpad_bl_get_brightness()
-+ * simpad_bl_set_brightness()
-+ * - new function simpad_bl_update_status()
-+ * - changed struct backlight_properties simpad_bl_props()
-+ * to new one
-+ * - changed __init simpad_bl_init() -> backlight_device_register
-+ *
-+ * 2007/03/24 mrdata
-+ * - added .brightness=127 in
-+ * struct backlight_properties simpad_bl_props()
-+ */
-+#include <asm/types.h>
-+#include <asm/hardware.h>
-+#include <asm/io.h>
-+
-+#include <linux/device.h>
-+#include <linux/backlight.h>
-+#include <linux/fb.h>
-+
-+#include "../mq200/mq200_data.h"
-+
-+#define SIMPAD_BACKLIGHT_MASK 0x00a10044
-+#define MAX_BRIGHT 254
-+#define REGISTER_BASE 0xf2e00000
-+
-+
-+static int simpad_bl_get_brightness(struct backlight_device *dev)
-+{
-+ u32 pwmctl;
-+
-+ pwmctl = readl(FP0FR(REGISTER_BASE));
-+ pwmctl &= ~SIMPAD_BACKLIGHT_MASK;
-+ pwmctl = pwmctl >> 8;
-+ pwmctl = MAX_BRIGHT - pwmctl;
-+
-+ return pwmctl;
-+}
-+
-+static int simpad_bl_set_brightness(int bright)
-+{
-+ union fp0fr fp0fr;
-+ unsigned long dutyCycle, pwmcontrol;
-+
-+ if(bright > MAX_BRIGHT)
-+ bright = MAX_BRIGHT;
-+
-+ /*
-+ * Determine dutyCycle.
-+ * Note: the lower the value, the brighter the display!
-+ */
-+
-+ dutyCycle = MAX_BRIGHT - bright;
-+
-+ /*
-+ *Configure PWM0 (source clock = oscillator clock, pwm always enabled,
-+ *zero, clock pre-divider = 4) pwm frequency = 12.0kHz
-+ */
-+ fp0fr.whole = readl(FP0FR(REGISTER_BASE));
-+ pwmcontrol = fp0fr.whole & 0xffff00ff;
-+ fp0fr.whole &= 0xffffff00;
-+ fp0fr.whole |= 0x00000044;
-+ writel(fp0fr.whole, FP0FR(REGISTER_BASE));
-+
-+ /* Write to pwm duty cycle register. */
-+ fp0fr.whole = dutyCycle << 8;
-+ fp0fr.whole &= 0x0000ff00;
-+ fp0fr.whole |= pwmcontrol;
-+ writel(fp0fr.whole, FP0FR(REGISTER_BASE));
-+
-+ return 0;
-+}
-+
-+static int simpad_bl_update_status(struct backlight_device *dev)
-+{
-+ return simpad_bl_set_brightness(dev->props->brightness);
-+}
-+
-+static struct backlight_properties simpad_bl_props = {
-+ .owner = THIS_MODULE,
-+ .update_status = simpad_bl_update_status,
-+ .get_brightness = simpad_bl_get_brightness,
-+ .brightness=127,
-+ .max_brightness = MAX_BRIGHT,
-+};
-+
-+static struct backlight_device *simpad_bl_device = NULL;
-+
-+static int __init simpad_bl_init(void) {
-+ simpad_bl_device = backlight_device_register("mq200_fb0", NULL,
-+ NULL, &simpad_bl_props);
-+ return simpad_bl_device != NULL;
-+}
-+
-+static void __exit simpad_bl_exit(void) {
-+ backlight_device_unregister(simpad_bl_device);
-+}
-+
-+
-+module_init(simpad_bl_init);
-+module_exit(simpad_bl_exit);
-+MODULE_AUTHOR("Holger Hans Peter Freyther");
-+MODULE_LICENSE("GPL");
-diff -uNr linux-2.6.20.vanilla/drivers/video/backlight/simpad_lcd.c linux-2.6.20/drivers/video/backlight/simpad_lcd.c
---- linux-2.6.20.vanilla/drivers/video/backlight/simpad_lcd.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/backlight/simpad_lcd.c 2007-03-28 22:58:41.000000000 +0200
-@@ -0,0 +1,80 @@
-+/*
-+ * GPLv2 <zecke@handhelds.org
-+ *
-+ * Implementation of the lcd_driver for the mq200 framebuffer
-+ *
-+ * 2007/03/24 mrdata:
-+ * - added simpad_lcd_get_contrast()
-+ * - added simpad_lcd_set_contrast()
-+ * - modify struct lcd_properties simpad_lcd_props
-+ */
-+#include <asm/arch/simpad.h>
-+#include <asm/hardware.h>
-+
-+#include <linux/device.h>
-+#include <linux/lcd.h>
-+
-+extern long get_cs3_shadow(void);
-+extern void set_cs3_bit(int);
-+extern void clear_cs3_bit(int);
-+
-+#define UNUSED(x) x=x
-+
-+static int simpad_lcd_get_power(struct lcd_device* dev)
-+{
-+ UNUSED(dev);
-+
-+ return (get_cs3_shadow() & DISPLAY_ON) ? 0 : 4;
-+}
-+
-+static int simpad_lcd_set_power(struct lcd_device* dev, int power)
-+{
-+ UNUSED(dev);
-+
-+ if( power == 4 )
-+ clear_cs3_bit(DISPLAY_ON);
-+ else
-+ set_cs3_bit(DISPLAY_ON);
-+
-+ return 0;
-+}
-+
-+static int simpad_lcd_get_contrast(struct lcd_device* dev)
-+{
-+ UNUSED(dev);
-+
-+ return 0;
-+}
-+
-+static int simpad_lcd_set_contrast(struct lcd_device* dev, int contrast)
-+{
-+ UNUSED(dev);
-+
-+ UNUSED(contrast);
-+
-+ return 0;
-+}
-+
-+static struct lcd_properties simpad_lcd_props = {
-+ .owner = THIS_MODULE,
-+ .get_power = simpad_lcd_get_power,
-+ .set_power = simpad_lcd_set_power,
-+ .get_contrast = simpad_lcd_get_contrast,
-+ .set_contrast = simpad_lcd_set_contrast,
-+ .max_contrast = 0
-+};
-+
-+static struct lcd_device* simpad_lcd_device = NULL;
-+
-+static int __init simpad_lcd_init(void) {
-+ simpad_lcd_device = lcd_device_register("mq200_fb0", NULL,
-+ &simpad_lcd_props);
-+ return simpad_lcd_device != NULL;
-+}
-+
-+static void __exit simpad_lcd_exit(void) {
-+ lcd_device_unregister(simpad_lcd_device);
-+}
-+
-+module_init(simpad_lcd_init);
-+module_exit(simpad_lcd_exit);
-diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/Makefile linux-2.6.20/drivers/video/mq200/Makefile
---- linux-2.6.20.vanilla/drivers/video/mq200/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/mq200/Makefile 2007-03-28 22:53:44.000000000 +0200
-@@ -0,0 +1,6 @@
-+# Makefile for mq200 video driver
-+# 4 Aug 2003, Holger Hans Peter Freyther
-+#
-+
-+obj-$(CONFIG_FB_MQ200) += mq_skeleton.o mq_external.o
-+
-diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq200_data.h linux-2.6.20/drivers/video/mq200/mq200_data.h
---- linux-2.6.20.vanilla/drivers/video/mq200/mq200_data.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/mq200/mq200_data.h 2007-03-28 22:53:44.000000000 +0200
-@@ -0,0 +1,1120 @@
-+/*
-+ * From ucLinux mq200fb.c and mq200fb.h
-+ *
-+ * 2007/03/11 mrdata:
-+ * insert registers for graphics controller 2 module
-+ */
-+
-+#ifndef __MQ200_FB_H__
-+#define __MQ200_FB_H__
-+
-+struct mq200_io_regions {
-+ u32 fb_size; /* framebuffer size */
-+ unsigned long phys_mmio_base; /* physical register memory base */
-+ unsigned long virt_mmio_base; /* virtual start of registers */
-+ unsigned long phys_fb_base; /* physical address of frame buffer */
-+ unsigned long virt_fb_base; /* virtual start of the framebuffer */
-+};
-+
-+#define MQ200_MONITOR_HORI_RES(info) info->monitor_info.horizontal_res
-+#define MQ200_MONITOR_VERT_RES(info) info->monitor_info.vertical_res
-+#define MQ200_MONITOR_DEPTH(info) info->monitor_info.depth
-+#define MQ200_MONITOR_LINE_LENGTH(info) info->monitor_info.line_length
-+
-+struct mq200_monitor_info {
-+ unsigned int horizontal_res;
-+ unsigned int vertical_res;
-+ unsigned int depth;
-+ unsigned int refresh;
-+ unsigned int line_length;
-+ unsigned long flags;
-+};
-+
-+
-+/**
-+ * Addresses of Module
-+ */
-+#define MQ200_FB_BASE (x) (x + 0x1800000) /* framebuffer */
-+#define MQ200_FB_SIZE 0x200000 /* framebuffer size in bytes */
-+#define MQ200_REGS_BASE(x) (x + 0x1e00000) /* start of registers area */
-+#define MQ200_REGS_SIZE 0x200000 /* registers area size */
-+
-+#define PMU_OFFSET 0x00000 /* power management */
-+#define CPU_OFFSET 0x02000 /* CPU interface */
-+#define MIU_OFFSET 0x04000 /* memory controller */
-+#define IN_OFFSET 0x08000 /* interrupt controller */
-+#define GC_OFFSET 0x0a000 /* graphics controller 1&2 */
-+#define GE_OFFSET 0x0c000 /* graphics engine */
-+#define FPI_OFFSET 0x0e000 /* flat panel controller */
-+#define CP1_OFFSET 0x10000 /* color palette 1 */
-+#define DC_OFFSET 0x14000 /* device configuration */
-+#define PCI_OFFSET 0x16000 /* PCI configuration */
-+#define PSF_OFFSET 0x18000 /* ??? */
-+
-+
-+/****
-+ * Registers
-+ */
-+
-+/* power management unit */
-+#define PMR(addr) (addr + PCI_OFFSET + 0x40)/* power management
-+ register */
-+#define PMR_VALUE 0x06210001 /* expected read value of PMR register */
-+#define PM00R(addr) (addr + PMU_OFFSET + 0x00) /* power management unit
-+ configuration
-+ register */
-+#define PM01R(addr) (addr + PMU_OFFSET + 0x04) /* D1 state control */
-+#define PM02R(addr) (addr + PMU_OFFSET + 0x08) /* d2 state control */
-+#define PM06R(addr) (addr + PMU_OFFSET + 0x18) /* PLL 2 programming */
-+#define PM07R(addr) (addr + PMU_OFFSET + 0x1c) /* PLL 3 programming */
-+
-+#define PMCSR(addr) (addr + PCI_OFFSET + 0x44) /* power management
-+ control/status
-+ register */
-+
-+/* memory interface unit */
-+#define MM00R(addr) (addr + MIU_OFFSET + 0x00)/* MIU interface control
-+ 0 */
-+#define MM01R(addr) (addr + MIU_OFFSET + 0x04) /* MIU interface control
-+ 1 */
-+#define MM02R(addr) (addr + MIU_OFFSET + 0x08) /* memory interface
-+ control 2 */
-+#define MM03R(addr) (addr + MIU_OFFSET + 0x0c) /* memory interface
-+ control 3 */
-+#define MM04R(addr) (addr + MIU_OFFSET + 0x10) /* memory interface
-+ control 4 */
-+/* graphics controller 1 module */
-+#define GC00R(addr) (addr + GC_OFFSET + 0x00) /* graphics controller 1
-+ control */
-+#define GC01R(addr) (addr + GC_OFFSET + 0x04) /* graphics controller
-+ CRT control */
-+#define GC02R(addr) (addr + GC_OFFSET + 0x08) /* horizontal display 1
-+ control */
-+#define GC03R(addr) (addr + GC_OFFSET + 0x0c) /* vertical display 1
-+ control */
-+#define GC04R(addr) (addr + GC_OFFSET + 0x10) /* horizontal sync 1
-+ control */
-+#define GC05R(addr) (addr + GC_OFFSET + 0x14) /* vertical sync 1
-+ control */
-+#define GC07R(addr) (addr + GC_OFFSET + 0x1c) /* vertical display 1
-+ count */
-+#define GC08R(addr) (addr + GC_OFFSET + 0x20) /* horizontal window 1
-+ control */
-+#define GC09R(addr) (addr + GC_OFFSET + 0x24) /* vertical window 1
-+ control */
-+#define GC0AR(addr) (addr + GC_OFFSET + 0x28) /* alternate horizontal
-+ window 1 control */
-+#define GC0BR(addr) (addr + GC_OFFSET + 0x2c) /* alternate vertical
-+ window 1 control */
-+#define GC0CR(addr) (addr + GC_OFFSET + 0x30) /* window 1
-+ start address */
-+#define GC0DR(addr) (addr + GC_OFFSET + 0x34) /* alternate window 1
-+ start address */
-+#define GC0ER(addr) (addr + GC_OFFSET + 0x38) /* alternate window 1
-+ stride */
-+#define GC0FR(addr) (addr + GC_OFFSET + 0x3c) /* alternate window 1
-+ line size */
-+#define GC10R(addr) (addr + GC_OFFSET + 0x40) /* hardware cursor 1
-+ position */
-+#define GC11R(addr) (addr + GC_OFFSET + 0x44) /* hardware cursor 1
-+ start address and
-+ offset */
-+#define GC12R(addr) (addr + GC_OFFSET + 0x48) /* hardware cursor 1
-+ foreground color */
-+#define GC13R(addr) (addr + GC_OFFSET + 0x4c) /* hardware cursor 1
-+ background color */
-+
-+/* graphics controller 2 module */
-+#define GC20R(addr) (addr + GC_OFFSET + 0x80) /* graphics controller 2
-+ control */
-+#define GC21R(addr) (addr + GC_OFFSET + 0x84) /* graphics controller
-+ CRC control */
-+#define GC22R(addr) (addr + GC_OFFSET + 0x88) /* horizontal display 2
-+ control */
-+#define GC23R(addr) (addr + GC_OFFSET + 0x8c) /* vertical display 2
-+ control */
-+#define GC24R(addr) (addr + GC_OFFSET + 0x90) /* horizontal sync 2
-+ control */
-+#define GC25R(addr) (addr + GC_OFFSET + 0x94) /* vertical sync 2
-+ control */
-+#define GC27R(addr) (addr + GC_OFFSET + 0x9c) /* vertical display 2
-+ count */
-+#define GC28R(addr) (addr + GC_OFFSET + 0xa0) /* horizontal window 2
-+ control */
-+#define GC29R(addr) (addr + GC_OFFSET + 0xa4) /* vertical window 2
-+ control */
-+#define GC2AR(addr) (addr + GC_OFFSET + 0xa8) /* alternate horizontal
-+ window 2 control */
-+#define GC2BR(addr) (addr + GC_OFFSET + 0xac) /* alternate vertical
-+ window 2 control */
-+#define GC2CR(addr) (addr + GC_OFFSET + 0xb0) /* window 2
-+ start address */
-+#define GC2DR(addr) (addr + GC_OFFSET + 0xb4) /* alternate window 2
-+ start address */
-+#define GC2ER(addr) (addr + GC_OFFSET + 0xb8) /* alternate window 2
-+ stride */
-+#define GC2FR(addr) (addr + GC_OFFSET + 0xbc) /* alternate window 2
-+ line size */
-+#define GC30R(addr) (addr + GC_OFFSET + 0xc0) /* hardware cursor 2
-+ position */
-+#define GC31R(addr) (addr + GC_OFFSET + 0xc4) /* hardware cursor 2
-+ start address and
-+ offset */
-+#define GC32R(addr) (addr + GC_OFFSET + 0xc8) /* hardware cursor 2
-+ foreground color */
-+#define GC33R(addr) (addr + GC_OFFSET + 0xcc) /* hardware cursor 2
-+ background color */
-+
-+/* graphics engine */
-+#define ROP_SRCCOPY 0xCC /* dest = source */
-+#define ROP_SRCPAINT 0xEE /* dest = source OR dest */
-+#define ROP_SRCAND 0x88 /* dest = source AND dest */
-+#define ROP_SRCINVERT 0x66 /* dest = source XOR dest */
-+#define ROP_SRCERASE 0x44 /* dest = source AND (NOT dest) */
-+#define ROP_NOTSRCCOPY 0x33 /* dest = NOT source */
-+#define ROP_NOTSRCERASE 0x11 /* dest = (NOT source) AND (NOT dest) */
-+#define ROP_MERGECOPY 0xC0 /* dest = source AND pattern */
-+#define ROP_MERGEPAINT 0xBB /* dest = (NOT source) OR dest */
-+#define ROP_PATCOPY 0xF0 /* dest = pattern */
-+#define ROP_PATPAINT 0xFB /* dest = DPSnoo */
-+#define ROP_PATINVERT 0x5A /* dest = pattern XOR dest */
-+#define ROP_DSTINVERT 0x55 /* dest = NOT dest */
-+#define ROP_BLACKNESS 0x00 /* dest = BLACK */
-+#define ROP_WHITENESS 0xFF /* dest = WHITE */
-+
-+#define GE00R(addr) (addr + GE_OFFSET + 0x00) /* primary drawing command
-+ register */
-+#define GE01R(addr) (addr + GE_OFFSET + 0x04) /* primary width and
-+ height register */
-+#define GE02R(addr) (addr + GE_OFFSET + 0x08) /* primary destination
-+ address register */
-+#define GE03R(addr) (addr + GE_OFFSET + 0x0c) /* primary source XY
-+ register */
-+#define GE04R(addr) (addr + GE_OFFSET + 0x10) /* primary color compare
-+ register */
-+#define GE05R(addr) (addr + GE_OFFSET + 0x14) /* primary clip left/top
-+ register */
-+#define GE06R(addr) (addr + GE_OFFSET + 0x18) /* primary clip
-+ right/bottom register
-+ */
-+#define GE07R(addr) (addr + GE_OFFSET + 0x1c) /* primary source and
-+ pattern offset
-+ register */
-+#define GE08R(addr) (addr + GE_OFFSET + 0x20) /* primary foreground
-+ color
-+ register/rectangle
-+ fill register */
-+#define GE09R(addr) (addr + GE_OFFSET + 0x24) /* source stride/offset
-+ register */
-+#define GE0AR(addr) (addr + GE_OFFSET + 0x28) /* destination stride
-+ register and color
-+ depth */
-+#define GE0BR(addr) (addr + GE_OFFSET + 0x2c) /* image base address
-+ register */
-+#define GE40R(addr) (addr + GE_OFFSET + 0x100) /* mono pattern register
-+ 0 */
-+#define GE41R(addr) (addr + GE_OFFSET + 0x104) /* mono pattern register
-+ 1 */
-+#define GE42R(addr) (addr + GE_OFFSET + 0x108) /* foreground color
-+ register */
-+#define GE43R(addr) (addr + GE_OFFSET + 0x10c) /* background color
-+ register */
-+/* color palette */
-+#define C1xxR(addr, regno) \
-+ (addr + CP1_OFFSET + (regno) * 4) /* graphics controller color
-+ palette 1 */
-+/* device configuration */
-+#define DC00R(addr) (addr + DC_OFFSET + 0x00) /* device configuration
-+ register 0 */
-+#define DC_RESET 0x4000
-+/* PCI configuration space */
-+#define PC00R(addr) (addr + PCI_OFFSET + 0x00)/* device ID/vendor ID
-+ register */
-+/* Flatpanel Control */
-+#define FP00R(addr) (addr + FPI_OFFSET + 0x00) /* Flat Panel Control 0 */
-+#define FP01R(addr) (addr + FPI_OFFSET + 0x04) /* Flat Panel Output Pin */
-+#define FP02R(addr) (addr + FPI_OFFSET + 0x08) /* Flat Panel Gener Purpose
-+ Outout Control Register */
-+#define FP03R(addr) (addr + FPI_OFFSET + 0x0c) /* General Purpose I/O Port
-+ Control Register */
-+#define FP04R(addr) (addr + FPI_OFFSET + 0x10) /* STN Panel Control Register */
-+#define FP05R(addr) (addr + FPI_OFFSET + 0x14) /* D-STN Half Frame Buffer
-+ Control Register -By Guess */
-+#define FP0FR(addr) (addr + FPI_OFFSET + 0x3c) /* Pulse Width Modulation
-+ Control Register */
-+#define FRCTL_PATTERN_COUNT 32
-+#define FP10R(addr) (addr + FPI_OFFSET + 0x40) /* Frame-Rate Control Pattern
-+ Register */
-+#define FP11R(addr) (addr + FPI_OFFSET + 0x44)
-+#define FP2FR(addr) (addr + FPI_OFFSET + 0xc0) /* Frame-Rate Control Weight
-+ Registers */
-+
-+
-+
-+
-+/* power management miscellaneous control */
-+union pm00r {
-+ struct {
-+ u32 pll1_n_b5 :1; /* PLL 1 N parameter bit 5 is 0 */
-+ u32 reserved_1 :1;
-+ u32 pll2_enbl :1; /* PLL 2 enable */
-+ u32 pll3_enbl :1; /* PLL 3 enable */
-+ u32 reserved_2 :1;
-+ u32 pwr_st_ctrl :1; /* power state status control */
-+ u32 reserved_3 :2;
-+
-+ u32 ge_enbl :1; /* graphics engine enable */
-+ u32 ge_bsy_gl :1; /* graphics engine force busy (global) */
-+ u32 ge_bsy_lcl :1; /* graphics engine force busy (local) */
-+ u32 ge_clock :2; /* graphics engine clock select */
-+ u32 ge_cmd_fifo :1; /* graphics engine command FIFO reset */
-+ u32 ge_src_fifo :1; /* graphics engine CPU source FIFO reset */
-+ u32 miu_pwr_seq :1; /* memory interface unit power sequencing
-+ enable */
-+
-+ u32 d3_mem_rfsh :1; /* D3 memory refresh */
-+ u32 d4_mem_rfsh :1; /* D4 memory refresh */
-+ u32 gpwr_intrvl :2; /* general power sequencing interval */
-+ u32 fppwr_intrvl:2; /* flat panel power sequencing interval */
-+ u32 gpwr_seq_ctr:1; /* general power sequencing interval control */
-+ u32 pmu_tm :1; /* PMU test mode */
-+
-+ u32 pwr_state :2; /* power state (read only) */
-+ u32 pwr_seq_st :1; /* power sequencing active status (read
-+ only) */
-+ u32 reserved_4 :5;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* D1 state control */
-+union pm01r {
-+ struct {
-+ u32 osc_enbl :1; /* D1 oscillator enable */
-+ u32 pll1_enbl :1; /* D1 PLL 1 enable */
-+ u32 pll2_enbl :1; /* D1 PLL 2 enable */
-+ u32 pll3_enbl :1; /* D1 PLL 3 enable */
-+ u32 miu_enbl :1; /* D1 Memory Interface Unit (MIU) enable */
-+ u32 mem_rfsh :1; /* D1 memory refresh enable */
-+ u32 ge_enbl :1; /* D1 Graphics Engine (GE) enable */
-+ u32 reserved_1 :1;
-+
-+ u32 crt_enbl :1; /* D1 CRT enable */
-+ u32 fpd_enbl :1; /* D1 Flat Panel enable */
-+ u32 reserved_2 :6;
-+
-+ u32 ctl1_enbl :1; /* D1 controller 1 enable */
-+ u32 win1_enbl :1; /* D1 window 1 enable */
-+ u32 awin1_enbl :1; /* D1 alternate window 1 enable */
-+ u32 cur1_enbl :1; /* D1 cursor 1 enable */
-+ u32 reserved_3 :4;
-+
-+ u32 ctl2_enbl :1; /* D1 controller 2 enable */
-+ u32 win2_enbl :1; /* D1 window 2 enable */
-+ u32 awin2_enbl :1; /* D1 alternate window 2 enable */
-+ u32 cur2_enbl :1; /* D1 cursor 2 enable */
-+ u32 reserved_4 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* D2 state control */
-+union pm02r {
-+ struct {
-+ u32 osc_enbl :1; /* D2 oscillator enable */
-+ u32 pll1_enbl :1; /* D2 PLL 1 enable */
-+ u32 pll2_enbl :1; /* D2 PLL 2 enable */
-+ u32 pll3_enbl :1; /* D2 PLL 3 enable */
-+ u32 miu_enbl :1; /* D2 Memory Interface Unit (MIU) enable */
-+ u32 mem_rfsh :1; /* D2 memory refresh enable */
-+ u32 ge_enbl :1; /* D2 Graphics Engine (GE) enable */
-+ u32 reserved_1 :1;
-+
-+ u32 crt_enbl :1; /* D2 CRT enable */
-+ u32 fpd_enbl :1; /* D2 Flat Panel enable */
-+ u32 reserved_2 :6;
-+
-+ u32 ctl1_enbl :1; /* D2 controller 1 enable */
-+ u32 win1_enbl :1; /* D2 window 1 enable */
-+ u32 awin1_enbl :1; /* D2 alternate window 1 enable */
-+ u32 cur1_enbl :1; /* D2 cursor 1 enable */
-+ u32 reserved_3 :4;
-+
-+ u32 ctl2_enbl :1; /* D2 controller 2 enable */
-+ u32 win2_enbl :1; /* D2 window 2 enable */
-+ u32 awin2_enbl :1; /* D2 alternate window 2 enable */
-+ u32 cur2_enbl :1; /* D2 cursor 2 enable */
-+ u32 reserved_4 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* PLL 2 programming */
-+union pm06r {
-+ struct {
-+ u32 clk_src :1; /* PLL 2 reference clock source */
-+ u32 bypass :1; /* PLL 2 bypass */
-+ u32 reserved_1 :2;
-+ u32 p_par :3; /* PLL 2 P parameter */
-+ u32 reserved_2 :1;
-+
-+ u32 n_par :5; /* PLL 2 N parameter */
-+ u32 reserved_3 :3;
-+
-+ u32 m_par :8; /* PLL 2 M parameter */
-+
-+ u32 reserved_4 :4;
-+ u32 trim :4; /* PLL 2 trim value */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* PLL 3 programming */
-+union pm07r {
-+ struct {
-+ u32 clk_src :1; /* PLL 3 reference clock source */
-+ u32 bypass :1; /* PLL 3 bypass */
-+ u32 reserved_1 :2;
-+ u32 p_par :3; /* PLL 3 P parameter */
-+ u32 reserved_2 :1;
-+
-+ u32 n_par :5; /* PLL 3 N parameter */
-+ u32 reserved_3 :3;
-+
-+ u32 m_par :8; /* PLL 3 M parameter */
-+
-+ u32 reserved_4 :4;
-+ u32 trim :4; /* PLL 3 trim value */
-+ } part;
-+ u32 whole;
-+};
-+
-+
-+
-+/* MIU interface control 1 */
-+union mm00r {
-+ struct {
-+ u32 miu_enbl :1; /* MIU enable bit */
-+ u32 mr_dsbl :1; /* MIU reset disable bit */
-+ u32 edr_dsbl :1; /* embedded DRAM reset disable bit */
-+ u32 reserved_1 :29;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* MIU interface control 2 */
-+union mm01r {
-+ struct {
-+ u32 mc_src :1; /* memory clock source */
-+ u32 msr_enbl :1; /* memory slow refresh enable bit */
-+ u32 pb_cpu :1; /* page break enable for CPU */
-+ u32 pb_gc1 :1; /* page break enable for GC1 */
-+ u32 pb_gc2 :1; /* page break enable for GC2 */
-+ u32 pb_stn_r :1; /* page break enable for STN read */
-+ u32 pb_stn_w :1; /* page break enable for STN write */
-+ u32 pb_ge :1; /* page break enable for GE */
-+ u32 reserved_1 :4;
-+ u32 mr_interval :14; /* normal memory refresh time interval */
-+ u32 reserved_2 :4;
-+ u32 edarm_enbl :1; /* embedded DRAM auto-refresh mode enable */
-+ u32 eds_enbl :1; /* EDRAM standby enable for EDRAM normal
-+ mode operation */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* memory interface control 3 */
-+union mm02r {
-+ struct {
-+ u32 bs_ :2;
-+ u32 bs_stnr :2; /* burst count for STN read memory cycles */
-+ u32 bs_stnw :2; /* burst count for STN write memroy cycles */
-+ u32 bs_ge :2; /* burst count for graphics engine
-+ read/write memroy cycles */
-+ u32 bs_cpuw :2; /* burst count for CPU write memory cycles */
-+ u32 fifo_gc1 :4; /* GC1 display refresh FIFO threshold */
-+ u32 fifo_gc2 :4; /* GC2 display refresh FIFO threshold */
-+ u32 fifo_stnr :4; /* STN read FIFO threshold */
-+ u32 fifo_stnw :4; /* STN write FIFO threshold */
-+ u32 fifo_ge_src :3; /* GE source read FIFO threshold */
-+ u32 fifo_ge_dst :3; /* GE destination read FIFO threshold */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* memory interface control 4 */
-+union mm03r {
-+ struct {
-+ u32 rd_late_req :1; /* read latency request */
-+ u32 reserved_1 :31;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* memory interface control 5 */
-+union mm04r {
-+ struct {
-+ u32 latency :3; /* EDRAM latency */
-+ u32 dmm_cyc :1; /* enable for the dummy cycle insertion
-+ between read and write cycles */
-+ u32 pre_dmm_cyc :1; /* enable for the dummy cycle insertion
-+ between read/write and precharge cycles
-+ for the same bank */
-+ u32 reserved_1 :3;
-+ u32 bnk_act_cls :2; /* bank activate command to bank close
-+ command timing interval control */
-+ u32 bnk_act_rw :1; /* bank activate command to read/wirte
-+ command timing interval control */
-+ u32 bnk_cls_act :1; /* bank close command to bank activate
-+ command timing interval control */
-+ u32 trc :1; /* row cycle time */
-+ u32 reserved_2 :3;
-+ u32 delay_r :2; /* programmable delay for read clock */
-+ u32 delay_m :2; /* programmable delay for internal memory
-+ clock */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* graphics controller 1 register */
-+union gc00r {
-+ struct {
-+ u32 ctl_enbl :1; /* Controller 1 Enable */
-+ u32 hc_reset :1; /* Horizontal Counter 1 Reset */
-+ u32 vc_reset :1; /* Vertical Counter 1 Reset */
-+ u32 iwin_enbl :1; /* Image Window 1 Enable */
-+ u32 gcd :4; /* Graphics Color Depth (GCD) */
-+
-+ u32 hc_enbl :1; /* Hardware Cursor 1 Enable */
-+ u32 reserved_1 :2;
-+ u32 aiwin_enbl :1; /* Alternate Image Window Enable */
-+ u32 agcd :4; /* Alternate Graphics Color Depth (AGCD) */
-+
-+ u32 g1rclk_src :2; /* G1RCLK Source */
-+ u32 tm0 :1; /* Test Mode 0 */
-+ u32 tm1 :1; /* Test Mode 1 */
-+ u32 fd :3; /* G1MCLK First Clock Divisor (FD1) */
-+ u32 reserved_2 :1;
-+
-+ u32 sd :8; /* G1MCLK Second Clock Divisor (SD1) */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* graphics controller CRT control */
-+union gc01r {
-+ struct {
-+ u32 dac_enbl :2; /* CRT DAC enable */
-+ u32 hsync_out :1; /* CRT HSYNC output during power down mode */
-+ u32 vsync_out :1; /* CRT VSYNC output during power down mode */
-+ u32 hsync_ctl :2; /* CRT HSYNC control */
-+ u32 vsync_ctl :2; /* CRT VSYNC control */
-+ /**/
-+ u32 hsync_pol :1; /* CRT HSYNC polarity */
-+ u32 vsync_pol :1; /* CRT VSYNC polarity */
-+ u32 sync_p_enbl :1; /* sync pedestal enable */
-+ u32 blnk_p_enbl :1; /* blank pedestal enable */
-+ u32 c_sync_enbl :1; /* composite sync enable */
-+ u32 vref_sel :1; /* VREF select */
-+ u32 mn_sns_enbl :1; /* monitor sense enable */
-+ u32 ct_out_enbl :1; /* constant output enable */
-+ /**/
-+ u32 dac_out_lvl :8; /* monitor sense DAC output level */
-+ /**/
-+ u32 blue_dac_r :1; /* blue DAC sense result */
-+ u32 green_dac_r :1; /* green DAC sense result */
-+ u32 red_dac_r :1; /* red DAC sense result */
-+ u32 reserved_1 :1;
-+ u32 mon_col_sel :1; /* mono/color monitor select */
-+ u32 reserved_2 :3;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* horizontal display 1 control */
-+union gc02r {
-+ struct {
-+ u32 hd1t :12; /* horizontal display 1 total */
-+ u32 reserved_1 :4;
-+
-+ u32 hd1e :12; /* horizontal display 1 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical display 1 control */
-+union gc03r {
-+ struct {
-+ u32 vd1t :12; /* vertical display 1 total */
-+ u32 reserved_1 :4;
-+
-+ u32 vd1e :12; /* vertical display 1 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* horizontal sync 1 control */
-+union gc04r {
-+ struct {
-+ u32 hs1s :12; /* horizontal sync 1 start */
-+ u32 reserved_1 :4;
-+
-+ u32 hs1e :12; /* horizontal sync 1 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical sync 1 control */
-+union gc05r {
-+ struct {
-+ u32 vs1s :12; /* vertical sync 1 start */
-+ u32 reserved_1 :4;
-+
-+ u32 vs1e :12; /* vertical sync 1 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical display 1 count */
-+union gc07r {
-+ struct {
-+ u32 vd_cnt :12; /* vertical display 1 count */
-+ u32 reverved_1 :20;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* horizontal window 1 control */
-+union gc08r {
-+ struct {
-+ u32 hw1s :12; /* horizontal window 1 start (HW1S) */
-+ u32 reserved_1 :4;
-+
-+ u32 hw1w :12; /* horizontal window 1 width (HW1W) */
-+ u32 w1ald :4; /* window 1 additional line data */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical window 1 control */
-+union gc09r {
-+ struct {
-+ u32 vw1s :12; /* vertical window 1 start */
-+ u32 reserved_1 :4;
-+ u32 vw1h :12; /* vertical window 1 height */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* window 1 start address */
-+union gc0cr {
-+ struct {
-+ u32 w1sa :21; /* window 1 start address */
-+ u32 reserved_1 :11;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* window 1 stride */
-+union gc0er {
-+ struct {
-+ s16 w1st; /* window 1 stride */
-+ s16 aw1st; /* alternate window 1 stride */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 1 position */
-+union gc10r {
-+ struct {
-+ u32 hc1s :12; /* horizontal cursor 1 start */
-+ u32 reserved_1 :4;
-+ u32 vc1s :12; /* vertical cursor 1 start */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 1 start address and offset */
-+union gc11r {
-+ struct {
-+ u32 hc1sa :11; /* hardware cursor 1 start address */
-+ u32 reserved_1 :5;
-+ u32 hc1o :6; /* horizontal cursor 1 offset */
-+ u32 reserved_2 :2;
-+ u32 vc1o :6; /* vertical cursor 1 offset */
-+ u32 reserved_3 :2;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 1 foreground color */
-+union gc12r {
-+ struct {
-+ u32 hc1fc :24; /* hardware cursor 1 foreground color */
-+ u32 reserved_1 :8;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 1 background color */
-+union gc13r {
-+ struct {
-+ u32 hc1bc :24; /* hardware cursor 1 background color */
-+ u32 reserved_1 :8;
-+ } part;
-+ u32 whole;
-+};
-+
-+
-+/* graphics controller 2 register */
-+union gc20r {
-+ struct {
-+ u32 ctl_enbl :1; /* Controller 2 Enable */
-+ u32 hc_reset :1; /* Horizontal Counter 2 Reset */
-+ u32 vc_reset :1; /* Vertical Counter 2 Reset */
-+ u32 iwin_enbl :1; /* Image Window 2 Enable */
-+ u32 gcd :4; /* Graphics Color Depth (GCD) */
-+
-+ u32 hc_enbl :1; /* Hardware Cursor 2 Enable */
-+ u32 reserved_1 :2;
-+ u32 aiwin_enbl :1; /* Alternate Image Window Enable */
-+ u32 agcd :4; /* Alternate Graphics Color Depth (AGCD) */
-+
-+ u32 g2rclk_src :2; /* G2RCLK Source */
-+ u32 tm0 :1; /* Test Mode 0 */
-+ u32 tm1 :1; /* Test Mode 1 */
-+ u32 fd :3; /* G2MCLK First Clock Divisor (FD1) */
-+ u32 reserved_2 :1;
-+
-+ u32 sd :8; /* G2MCLK Second Clock Divisor (SD1) */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* graphics controller CRC control */
-+union gc21r {
-+ struct {
-+ u32 crc_enbl :1; /* CRC enable */
-+ u32 vsync_wait :1; /* CRC input data control waitime of VSYNC */
-+ u32 crc_o_sel :2; /* CRC output select */
-+ u32 reserved_1 :4;
-+ u32 crc_result :22; /* CRC result (read only) */
-+ u32 reserved_2 :2;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* horizontal display 2 control */
-+union gc22r {
-+ struct {
-+ u32 hd2t :12; /* horizontal display 2 total */
-+ u32 reserved_1 :4;
-+
-+ u32 hd2e :12; /* horizontal display 2 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical display 2 control */
-+union gc23r {
-+ struct {
-+ u32 vd2t :12; /* vertical display 2 total */
-+ u32 reserved_1 :4;
-+
-+ u32 vd2e :12; /* vertical display 2 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* horizontal sync 2 control */
-+union gc24r {
-+ struct {
-+ u32 hs2s :12; /* horizontal sync 2 start */
-+ u32 reserved_1 :4;
-+
-+ u32 hs2e :12; /* horizontal sync 2 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical sync 2 control */
-+union gc25r {
-+ struct {
-+ u32 vs2s :12; /* vertical sync 2 start */
-+ u32 reserved_1 :4;
-+
-+ u32 vs2e :12; /* vertical sync 2 end */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical display 2 count */
-+union gc27r {
-+ struct {
-+ u32 vd_cnt :12; /* vertical display 2 count */
-+ u32 reverved_1 :20;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* horizontal window 2 control */
-+union gc28r {
-+ struct {
-+ u32 hw2s :12; /* horizontal window 2 start (HW2S) */
-+ u32 reserved_1 :4;
-+
-+ u32 hw2w :12; /* horizontal window 2 width (HW2W) */
-+ u32 w2ald :4; /* window 2 additional line data */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* vertical window 2 control */
-+union gc29r {
-+ struct {
-+ u32 vw2s :12; /* vertical window 2 start */
-+ u32 reserved_1 :4;
-+ u32 vw2h :12; /* vertical window 2 height */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* window 2 start address */
-+union gc2cr {
-+ struct {
-+ u32 w2sa :21; /* window 2 start address */
-+ u32 reserved_1 :11;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* window 2 stride */
-+union gc2er {
-+ struct {
-+ s16 w2st; /* window 2 stride */
-+ s16 aw2st; /* alternate window 2 stride */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 2 position */
-+union gc30r {
-+ struct {
-+ u32 hc2s :12; /* horizontal cursor 2 start */
-+ u32 reserved_1 :4;
-+ u32 vc2s :12; /* vertical cursor 2 start */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 2 start address and offset */
-+union gc31r {
-+ struct {
-+ u32 hc2sa :11; /* hardware cursor 2 start address */
-+ u32 reserved_1 :5;
-+ u32 hc2o :6; /* horizontal cursor 2 offset */
-+ u32 reserved_2 :2;
-+ u32 vc2o :6; /* vertical cursor 2 offset */
-+ u32 reserved_3 :2;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 2 foreground color */
-+union gc32r {
-+ struct {
-+ u32 hc2fc :24; /* hardware cursor 2 foreground color */
-+ u32 reserved_1 :8;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* hardware cursor 2 background color */
-+union gc33r {
-+ struct {
-+ u32 hc2bc :24; /* hardware cursor 2 background color */
-+ u32 reserved_1 :8;
-+ } part;
-+ u32 whole;
-+};
-+
-+
-+/* primary drawing command register */
-+union ge00r {
-+ struct {
-+ u32 rop :8; /* raster operation */
-+ /**/
-+ u32 cmd_typ :3; /* command type */
-+ u32 x_dir :1; /* x direction */
-+ u32 y_dir :1; /* y direction */
-+ u32 src_mem :1; /* source memory */
-+ u32 mon_src :1; /* mono source */
-+ u32 mon_ptn :1; /* mono pattern */
-+ /**/
-+ u32 dst_trns_e :1; /* destination transparency enable */
-+ u32 dst_trns_p :1; /* destination transparency polarity */
-+ u32 mon_trns_e :1; /* mono source or mono pattern transparency
-+ enable */
-+ u32 mon_trns_p :1; /* mono transparency polarity */
-+ u32 mod_sel :1; /* memory to screen or off screen to screen
-+ mode select */
-+ u32 alpha_sel :2; /* Alpha byte mask selection */
-+ u32 sol_col :1; /* solid color */
-+ /**/
-+ u32 stride_eq :1; /* source stride is equal to destination
-+ stride */
-+ u32 rop2_sel :1; /* ROP2 code selection */
-+ u32 clipping :1; /* enable clipping */
-+ u32 auto_exec :1; /* auto execute */
-+ u32 reserved_1 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* primary width and height register */
-+union ge01r {
-+ struct {
-+ u32 width :12; /* source/destination window width */
-+ u32 reserved_1 :4;
-+
-+ u32 height :12; /* source/destination window height */
-+ u32 reserved_2 :1;
-+ u32 reserved_3 :3;
-+ } bitblt;
-+ struct {
-+ u32 dm :17;
-+ u32 axis_major :12;
-+ u32 x_y :1; /* x-major or y-major */
-+ u32 last_pix :1; /* decision to draw or not to draw the last
-+ pixel of the line */
-+ u32 reserved_1 :1;
-+ } bresenham;
-+ u32 whole;
-+};
-+
-+/* primary destination address register */
-+union ge02r {
-+ struct {
-+ u32 dst_x :12; /* destination x position */
-+ u32 reserved_1 :1;
-+ u32 h_offset :3; /* mono/color pattern horizontal offset */
-+
-+ u32 dst_y :12; /* destination y position */
-+ u32 reserved_2 :1;
-+ u32 v_offset :3; /* mono/color pattern vertical offset */
-+ } window;
-+ struct {
-+ u32 x :12; /* starting x coordinate */
-+ u32 dm :17; /* 17 bits major-axis delta */
-+ u32 reserved_1 :3;
-+ } line;
-+ u32 whole;
-+};
-+
-+/* source XY register/line draw starting Y coordinate and mintor axis delta */
-+union ge03r {
-+ struct {
-+ u32 src_x :12; /* source X position */
-+ u32 reserved_1 :4;
-+
-+ u32 src_y :12; /* source Y position */
-+ u32 reserved_2 :4;
-+ } window;
-+ struct {
-+ u32 start_y :12; /* starting Y coordinate */
-+ u32 dn :17; /* 17 bits minor-axis delta */
-+ u32 reserved_1 :3;
-+ } line;
-+ u32 whole;
-+};
-+
-+/* clip left/top register */
-+union ge05r {
-+ struct {
-+ u32 left :12; /* left edge of clipping rectangle */
-+ u32 reserved_1 :4;
-+
-+ u32 top :12; /* top edge of clipping rectangle */
-+ u32 reserved_2 :4;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* source stride/offset register */
-+union ge09r {
-+ struct {
-+ u32 src_strid :12; /* source line stride */
-+ u32 reserved_1 :13;
-+ u32 strt_bit :3; /* initial mono source bit offset */
-+ u32 strt_byte :3; /* initial mono/color source byte offset */
-+ u32 reserved_2 :1;
-+ } line;
-+ struct {
-+ u32 strt_bit :5; /* initial mono source bit offset */
-+ u32 reserved_1 :1;
-+ u32 amount :10; /* number of 16 bytes amount that MIU need
-+ to fetch from frame buffer */
-+
-+ u32 reserved_2 :9;
-+ u32 bit_spc :7; /* bit space between lines */
-+ } pack_mono;
-+ struct {
-+ u32 strt_bit :3; /* initial mono source bit offset */
-+ u32 strt_byte :3; /* initial mono/color source byte offset */
-+ u32 amount :10; /* number of 16 bytes amount that MIU need
-+ to fetch from frame buffer */
-+
-+ u32 reserved_1 :9;
-+ u32 bit_spc :3; /* bit space between lines */
-+ u32 byt_spc :4; /* byte space between lines */
-+ } pack_color;
-+ u32 whole;
-+};
-+
-+/* destination stride register and color depth */
-+union ge0ar {
-+ struct {
-+ u32 dst_strid :12; /* destination line stride and color depth */
-+ u32 reserved_1 :18;
-+ u32 col_dpth :2; /* color depth */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* graphics controller color pallete */
-+union c1xxr {
-+ struct {
-+ u8 red; /* red color pallete */
-+ u8 green; /* green/gray color pallete */
-+ u8 blue; /* blue color palette */
-+ u8 reserved_1;
-+ } part;
-+ u32 whole;
-+};
-+
-+/* devicee configuration register 0 */
-+union dc00r {
-+ struct {
-+ u32 osc_bypass :1; /* oscillator bypass */
-+ u32 osc_enbl :1; /* oscillator enable */
-+ u32 pll1_bypass :1; /* PLL1 bypass */
-+ u32 pll1_enbl :1; /* PLL1 enable */
-+ u32 pll1_p_par :3; /* PLL1 P parameter */
-+ u32 cpu_div :1; /* CPU interface clock divisor */
-+ u32 pll1_n_par :5; /* PLL1 N parameter */
-+ u32 saisc :1; /* StrongARM interface synchronizer control */
-+ u32 s_chp_reset :1; /* software chip reset */
-+ u32 mem_enbl :1; /* memory standby enable */
-+ u32 pll1_m_par :8; /* PLL 1 M parameter */
-+ u32 osc_shaper :1; /* oscillator shaper disable */
-+ u32 fast_pwr :1; /* fast power sequencing */
-+ u32 osc_frq :2; /* oscillator frequency select */
-+ u32 pll1_trim :4; /* PLL 1 trim value */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* device ID/vendor ID register */
-+union pc00r {
-+ struct {
-+ u16 device; /* device ID */
-+ u16 vendor; /* vendor ID */
-+ } part;
-+ u32 whole;
-+};
-+
-+/* Flat Panel Control Register */
-+union fp00r {
-+ struct {
-+ u32 flatp_enbl : 2; /* Flat Panel Interface Enable */
-+ u32 flatp_type : 2; /* Flat Panel Type */
-+ u32 mono : 1; /* Mono/Color Panel Select */
-+ u32 flatp_intf : 3; /* Flat Panel Interface */
-+ u32 dither_pat : 2; /* Dither Pattern */
-+ u32 reserved : 2; /* Reserved Must Be 0*/
-+ u32 dither_col : 3; /* Dither Base Color */
-+ u32 alt_win_ctl: 1; /* Alternate Window Control */
-+ u32 frc_ctl : 2; /* FRC Control */
-+ u32 dither_adj1: 6; /* Dither Pattern Adjust 1 */
-+ u32 dither_adj2: 3; /* Dither Pattern Adjust 2 */
-+ u32 dither_adj3: 1; /* Dither Pattern Adjust 3 */
-+ u32 test_mode0 : 1; /* Test Mode 0 */
-+ u32 test_mode1 : 1; /* Test Mode 1 */
-+ u32 test_mode2 : 1; /* Test Mode 2 */
-+ u32 test_mode3 : 1; /* Test Mode 3 */
-+ } part;
-+ u32 whole;
-+};
-+
-+union fp01r {
-+ struct {
-+ u32 dummy;
-+ } part;
-+ u32 whole;
-+};
-+
-+union fp02r {
-+ struct {
-+ u32 dummy;
-+ } part;
-+ u32 whole;
-+};
-+
-+union fp03r {
-+ struct {
-+ u32 dummy;
-+ } part;
-+ u32 whole;
-+};
-+
-+union fp04r {
-+ struct {
-+ u32 dummy;
-+ } part;
-+ u32 whole;
-+};
-+
-+union fp05r {
-+ struct {
-+ u32 dummy;
-+ } part;
-+ u32 whole;
-+};
-+
-+union fp0fr {
-+ struct {
-+ u32 dummy;
-+ } part;
-+ u32 whole;
-+};
-+
-+
-+
-+
-+/****
-+ * Others
-+ */
-+
-+#define CHIPNAME "MQ-200"
-+
-+extern void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr);
-+extern void mq200_external_setqmode(struct mq200_monitor_info*, unsigned long, spinlock_t *);
-+extern void mq200_external_offdisplay(unsigned long);
-+extern void mq200_external_ondisplay (unsigned long);
-+extern int mq200_external_probe(unsigned long);
-+
-+
-+
-+#endif
-diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq_external.c linux-2.6.20/drivers/video/mq200/mq_external.c
---- linux-2.6.20.vanilla/drivers/video/mq200/mq_external.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/mq200/mq_external.c 2007-03-28 22:53:44.000000000 +0200
-@@ -0,0 +1,513 @@
-+/*
-+ * Copyright (C) 2005 Holger Hans Peter Freyther
-+ *
-+ * Based ON:
-+ *
-+ * linux/drivers/video/mq200fb.c -- MQ-200 for a frame buffer device
-+ * based on linux/driver/video/pm2fb.c
-+ *
-+ * 2007/03/11 mrdata:
-+ * bug found in gc1_reset(), renaming to gc1_gc2_reset()
-+ * extend mq200_external_ondisplay() -> LCD for GC2 and CRT for GC1
-+ *
-+ * Copyright (C) 2000 Lineo, Japan
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive
-+ * for more details.
-+ */
-+
-+#include <asm/types.h>
-+#include <asm/io.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/hardware.h>
-+
-+#include "mq200_data.h"
-+
-+
-+#if 1
-+#define PRINTK(args...) printk(args)
-+#else
-+#define PRINTK(args...)
-+#endif
-+
-+
-+/****
-+ * power state transition to "state".
-+ */
-+static void
-+power_state_transition(unsigned long register_base, int state)
-+{
-+ int i;
-+ writel(state, PMCSR(register_base));
-+ mdelay(300);
-+ for (i = 1; ; i++) {
-+ udelay(100);
-+ if ((readl(PMCSR(register_base)) & 0x3) == state) {
-+ break;
-+ }
-+ }
-+}
-+
-+
-+/****
-+ * device configuration initialization.
-+ */
-+static void
-+dc_reset(unsigned long register_base)
-+{
-+ union dc00r dc00r;
-+
-+ /* Reset First */
-+ dc00r.whole = DC_RESET;
-+ writel(dc00r.whole, DC00R(register_base));
-+ mdelay(100);
-+
-+ dc00r.whole = 0xEF2082A;
-+ writel(dc00r.whole, DC00R(register_base));
-+ mdelay(300);
-+ PRINTK(CHIPNAME ": DC00R = 0x%08X\n", readl(DC00R(register_base)));
-+}
-+
-+
-+/****
-+ * initialize memory interface unit.
-+ */
-+static void
-+miu_reset(unsigned long register_base)
-+{
-+ union mm00r mm00r;
-+ union mm01r mm01r;
-+ union mm02r mm02r;
-+ union mm03r mm03r;
-+ union mm04r mm04r;
-+
-+ /* MIU interface control 1 */
-+ mm00r.whole = 0x4;
-+ writel(mm00r.whole, MM00R(register_base));
-+ mdelay(50);
-+ writel(0, MM00R(register_base));
-+ mdelay(50);
-+
-+ /* MIU interface control 2
-+ * o PLL 1 output is used as memory clock source.
-+ */
-+ mm01r.whole = 0x4143e086;
-+ writel(mm01r.whole, MM01R(register_base));
-+
-+ /* memory interface control 3 */
-+ mm02r.whole = 0x6d6aabff;
-+ writel(mm02r.whole, MM02R(register_base));
-+
-+ /* memory interface control 5 */
-+ mm04r.whole = 0x10d;
-+ writel(mm04r.whole, MM04R(register_base));
-+
-+ /* memory interface control 4 */
-+ mm03r.whole = 0x1;
-+ writel(mm03r.whole, MM03R(register_base));
-+ mdelay(50);
-+
-+ /* MIU interface control 1 */
-+ mm00r.whole = 0x3;
-+ writel(mm00r.whole, MM00R(register_base));
-+ mdelay(50);
-+}
-+
-+/****
-+ *
-+ */
-+static
-+void fpctrl_reset(unsigned long addr)
-+{
-+ /*
-+ * We're in D0 State, let us set the FPCTRL
-+ */
-+ union fp00r fp00r;
-+ union fp01r fp01r;
-+ union fp02r fp02r;
-+ union fp03r fp03r;
-+ union fp04r fp04r;
-+ union fp0fr fp0fr;
-+
-+ fp00r.whole = 0x6320;
-+ writel(fp00r.whole, FP00R(addr));
-+
-+ fp01r.whole = 0x20;
-+ writel(fp01r.whole, FP01R(addr));
-+
-+ fp04r.whole = 0xBD0001;
-+ writel(fp04r.whole, FP04R(addr));
-+
-+ /* Set Flat Panel General Purpose register first */
-+ fp02r.whole = 0x0;
-+ writel(fp02r.whole, FP02R(addr));
-+
-+ fp03r.whole = 0x0;
-+ writel(fp03r.whole, FP03R(addr));
-+
-+ fp0fr.whole = 0xA16c44;
-+ writel(fp0fr.whole, FP0FR(addr));
-+
-+ /* Set them again */
-+ fp02r.whole = 0x0;
-+ writel(fp02r.whole, FP02R(addr));
-+
-+ fp03r.whole = 0x0;
-+ writel(fp03r.whole, FP03R(addr));
-+}
-+
-+
-+/****
-+ * initialize power management unit.
-+ */
-+static void
-+pmu_reset(unsigned long register_base)
-+{
-+ union pm00r pm00r;
-+ union pm01r pm01r;
-+ union pm02r pm02r;
-+
-+ /* power management miscellaneous control
-+ * o GE is driven by PLL 1 clock.
-+ */
-+ pm00r.whole = 0xc0900;
-+ writel(pm00r.whole, PM00R(register_base));
-+
-+ /* D1 state control */
-+ pm01r.whole = 0x5000271;
-+ writel(pm01r.whole, PM01R(register_base));
-+
-+ /* D2 state control */
-+ pm02r.whole = 0x271;
-+ writel(pm02r.whole, PM02R(register_base));
-+}
-+
-+/****
-+ * initialize graphics controller 1
-+ * and graphics controller 2
-+ */
-+static void
-+gc1_gc2_reset(unsigned long register_base, spinlock_t *lock )
-+{
-+ unsigned long flags;
-+ union gc00r gc00r;
-+ union gc01r gc01r;
-+ union gc02r gc02r;
-+ union gc03r gc03r;
-+ union gc04r gc04r;
-+ union gc05r gc05r;
-+ union gc08r gc08r;
-+ union gc09r gc09r;
-+ union gc0cr gc0cr;
-+ union gc0er gc0er;
-+ union gc20r gc20r;
-+ union gc22r gc22r;
-+ union gc23r gc23r;
-+ union gc24r gc24r;
-+ union gc25r gc25r;
-+ union gc28r gc28r;
-+ union gc29r gc29r;
-+ union gc2cr gc2cr;
-+ union gc2er gc2er;
-+
-+ union pm00r pm00r;
-+ union pm06r pm06r;
-+ union pm06r pm07r;
-+
-+ spin_lock_irqsave(lock, flags);
-+
-+ /* alternate window 1 stride */
-+ gc0er.whole = 0x640;
-+ writel(gc0er.whole, GC0ER(register_base));
-+
-+ /* image window 1 start address */
-+ gc0cr.whole = 0x0;
-+ writel(gc0cr.whole, GC0CR(register_base));
-+
-+ /* alternate window 2 stride */
-+ gc2er.whole = 0x640;
-+ writel(gc0er.whole, GC2ER(register_base));
-+
-+ /* image window 2 start address */
-+ gc2cr.whole = 0x0;
-+ writel(gc2cr.whole, GC2CR(register_base));
-+
-+ /* read PM Register */
-+ pm00r.whole = readl(PM00R(register_base));
-+
-+ /* horizontal window 1 control */
-+ gc08r.whole = 0x131f0000;
-+ writel(gc08r.whole, GC08R(register_base));
-+
-+ /* vertical window 1 control */
-+ gc09r.whole = 0x12570000;
-+ writel(gc09r.whole, GC09R(register_base));
-+
-+ /* horizontal display 1 control */
-+ gc02r.whole = 0x320041e;
-+ writel(gc02r.whole, GC02R(register_base));
-+
-+ /* vertical display 1 control */
-+ gc03r.whole = 0x2570273;
-+ writel(gc03r.whole, GC03R(register_base));
-+
-+ /* horizontal sync 1 control */
-+ gc04r.whole = 0x3c70347;
-+ writel(gc04r.whole, GC04R(register_base));
-+
-+ /* vertical sync 1 control */
-+ gc05r.whole = 0x25d0259;
-+ writel(gc05r.whole, GC05R(register_base));
-+
-+ /* graphics controller CRT control */
-+ gc01r.whole = 0x800;
-+ writel(gc01r.whole, GC01R(register_base));
-+
-+ /* PLL 2 programming */
-+ pm06r.whole = 0xE90830;
-+ writel(pm06r.whole, PM06R(register_base));
-+
-+ /* graphics controller 1 register
-+ * o GC1 clock source is PLL 2.
-+ * o hardware cursor is disabled.
-+ */
-+ gc00r.whole = 0x10000C8 | 0x20000;
-+ writel(gc00r.whole, GC00R(register_base));
-+
-+#if 0
-+ /* alternate horizontal window 1 control */
-+ writel(0, GC0AR(register_base));
-+
-+ /* alternate vertical window 1 control */
-+ writel(0, GC0BR(register_base));
-+
-+ /* window 1 start address */
-+ writel(0x2004100, GC0CR(register_base));
-+
-+ /* alternate window 1 start address */
-+ writel(0, GC0DR(register_base));
-+
-+ /* window 1 stride */
-+ gc0er.whole = 0x5100048;
-+ writel(gc0er.whole, GC0ER(register_base));
-+
-+ /* reserved register - ??? - */
-+ writel(0x31f, GC0FR(register_base));
-+#endif
-+
-+#if 0
-+ /* hardware cursor 1 position */
-+ writel(0, GC10R(register_base));
-+
-+ /* hardware cursor 1 start address and offset */
-+ gc11r.whole = 0x5100048;
-+ writel(gc11r.whole, GC11R(register_base));
-+
-+ /* hardware cursor 1 foreground color */
-+ writel(0x00ffffff, GC12R(register_base));
-+
-+ /* hardware cursor 1 background color */
-+ writel(0x00000000, GC13R(register_base));
-+#endif
-+
-+ /* horizontal window 2 control */
-+ gc28r.whole = 0x31f0000;
-+ writel(gc28r.whole, GC28R(register_base));
-+
-+ /* vertical window 2 control */
-+ gc29r.whole = 0x2570000;
-+ writel(gc29r.whole, GC29R(register_base));
-+
-+ /* horizontal display 2 control */
-+ gc22r.whole = 0x320041e;
-+ writel(gc22r.whole, GC22R(register_base));
-+
-+ /* vertical display 2 control */
-+ gc23r.whole = 0x2570273;
-+ writel(gc23r.whole, GC23R(register_base));
-+
-+ /* horizontal sync 2 control */
-+ gc24r.whole = 0x3c70347;
-+ writel(gc24r.whole, GC24R(register_base));
-+
-+ /* vertical sync 2 control */
-+ gc25r.whole = 0x25d0259;
-+ writel(gc25r.whole, GC25R(register_base));
-+
-+ /* graphics controller CRT control */
-+ gc01r.whole = 0x800;
-+ writel(gc01r.whole, GC01R(register_base));
-+
-+ /* PLL 3 programming */
-+ pm07r.whole = 0xE90830;
-+ writel(pm07r.whole, PM07R(register_base));
-+
-+ /* graphics controller 2 register
-+ * o GC2 clock source is PLL 3.
-+ * o hardware cursor is disabled.
-+ */
-+ gc20r.whole = 0x10000C8 | 0x30000;
-+ writel(gc20r.whole, GC20R(register_base));
-+
-+ /*
-+ * Enable PLL2 and PLL3 in the PM Register
-+ */
-+ pm00r.part.pll2_enbl = 0x1;
-+ pm00r.part.pll3_enbl = 0x1;
-+ writel(pm00r.whole, PM00R(register_base));
-+
-+ spin_unlock_irqrestore(lock, flags);
-+}
-+
-+
-+/****
-+ * initialize graphics engine.
-+ */
-+static void
-+ge_reset(unsigned long register_base)
-+{
-+ /* drawing command register */
-+ writel(0, GE00R(register_base));
-+
-+ /* promary width and height register */
-+ writel(0, GE01R(register_base));
-+
-+ /* primary destination address register */
-+ writel(0, GE02R(register_base));
-+
-+ /* primary source XY register */
-+ writel(0, GE03R(register_base));
-+
-+ /* primary color compare register */
-+ writel(0, GE04R(register_base));
-+
-+ /* primary clip left/top register */
-+ writel(0, GE05R(register_base));
-+
-+ /* primary clip right/bottom register */
-+ writel(0, GE06R(register_base));
-+
-+ /* primary source and pattern offset register */
-+ writel(0, GE07R(register_base));
-+
-+ /* primary foreground color register/rectangle fill color depth */
-+ writel(0, GE08R(register_base));
-+
-+ /* source stride/offset register */
-+ writel(0, GE09R(register_base));
-+
-+ /* destination stride register and color depth */
-+ writel(0, GE0AR(register_base));
-+
-+ /* image base address register */
-+ writel(0, GE0BR(register_base));
-+}
-+
-+/****
-+ * initialize Color Palette 1.
-+ */
-+static void
-+cp1_reset(unsigned long addr_info)
-+{
-+ int i;
-+
-+ for (i = 0; i < 256; i++)
-+ writel(0, C1xxR(addr_info, i));
-+}
-+
-+
-+/*
-+ * Below functions are called from the skeleton
-+ */
-+void mq200_external_setpal(unsigned regno, unsigned long color, unsigned long addr)
-+{
-+ writel(color,C1xxR(addr,regno));
-+}
-+
-+void mq200_external_setqmode(struct mq200_monitor_info* info,
-+ unsigned long addr, spinlock_t *lock)
-+{
-+ dc_reset(addr); /* device configuration */
-+
-+ power_state_transition(addr, 0); /* transition to D0 state */
-+
-+ pmu_reset(addr); /* power management unit */
-+
-+ miu_reset(addr); /* memory interface unit */
-+
-+ ge_reset(addr); /* graphics engine */
-+
-+ fpctrl_reset(addr); /* reset the panel settings */
-+
-+ gc1_gc2_reset(addr, lock); /* graphics controller 1 and 2 */
-+
-+ cp1_reset(addr); /* color palette 1 */
-+
-+ mq200_external_ondisplay(addr); /* LCD and CRT */
-+}
-+
-+void mq200_external_offdisplay(unsigned long addr)
-+{
-+ /*
-+ * Move the MQ200 to D3 mode
-+ */
-+ power_state_transition(addr, 3);
-+}
-+
-+/**
-+ * to be called after mq200_external_setqmode
-+ */
-+void mq200_external_ondisplay (unsigned long addr)
-+{
-+ /*
-+ * Set the framebuffer details
-+ */
-+ union gc00r gc00r;
-+ union gc01r gc01r;
-+ union gc20r gc20r;
-+ union fp00r fp00r;
-+
-+ /* enable LCD for GC2 */
-+ fp00r.whole = readl(FP00R(addr));
-+ fp00r.whole &= 0xfffffffc;
-+
-+ gc20r.whole = readl(GC20R(addr));
-+
-+ if(!(gc20r.whole & 0x1)) {
-+ gc20r.whole |= 0x1;
-+ writel(gc20r.whole, GC20R(addr));
-+ }
-+
-+ fp00r.whole |= 0x3;
-+ writel(fp00r.whole, FP00R(addr));
-+
-+ /* enable CRT for GC1 */
-+ gc00r.whole = readl(GC00R(addr));
-+
-+ if(!(gc00r.whole & 0x1)) {
-+ gc00r.whole |= 0x1;
-+ writel(gc00r.whole, GC00R(addr));
-+ }
-+
-+ gc01r.whole = readl(GC01R(addr));
-+ gc01r.whole &= 0xfffffffc;
-+
-+ gc01r.whole |= 0x1;
-+ writel(gc01r.whole, GC01R(addr));
-+
-+}
-+
-+int mq200_external_probe(unsigned long addr)
-+{
-+ union pc00r pc00r;
-+ if(readl(PMR(addr)) != PMR_VALUE)
-+ return 0;
-+
-+ pc00r.whole = readl(PC00R(addr));
-+ printk(KERN_INFO "mq200 video driver found Vendor: 0x%X Device: 0x%X\n",
-+ pc00r.part.device, pc00r.part.vendor);
-+ return 1;
-+}
-diff -uNr linux-2.6.20.vanilla/drivers/video/mq200/mq_skeleton.c linux-2.6.20/drivers/video/mq200/mq_skeleton.c
---- linux-2.6.20.vanilla/drivers/video/mq200/mq_skeleton.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/video/mq200/mq_skeleton.c 2007-03-28 22:53:44.000000000 +0200
-@@ -0,0 +1,398 @@
-+/*
-+ * Author: Holger Hans Peter Freyther
-+ *
-+ *
-+ * This implements the frame buffer driver interface to communicate
-+ * with the kernel.
-+ * It uses the mq200 routines from the ucLinux driver from Lineo
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/autoconf.h>
-+#include <linux/platform_device.h>
-+#include <linux/module.h>
-+#include <linux/fb.h>
-+#include <linux/types.h>
-+#include <linux/spinlock.h>
-+
-+#include "mq200_data.h"
-+
-+#if CONFIG_SA1100_SIMPAD
-+/*
-+ * Siemens SIMpad specefic data
-+ */
-+#include <asm/arch/simpad.h>
-+#include <asm/arch/hardware.h>
-+
-+#define MQ200_REGIONS simpad_mq200_regions
-+#define MQ200_MONITOR simpad_mq200_panel
-+
-+static struct mq200_io_regions simpad_mq200_regions = {
-+ .fb_size = MQ200_FB_SIZE,
-+ .phys_mmio_base = 0x4be00000,
-+ .virt_mmio_base = 0xf2e00000,
-+ .phys_fb_base = 0x4b800000,
-+ .virt_fb_base = 0xf2800000,
-+};
-+
-+static struct mq200_monitor_info simpad_mq200_panel = {
-+ .horizontal_res = 800,
-+ .vertical_res = 600,
-+ .depth = 16,
-+ .refresh = 60,
-+ .line_length = 1600,
-+ .flags = 0x00130004,
-+};
-+
-+extern long get_cs3_shadow(void);
-+extern void set_cs3_bit(int value);
-+extern void clear_cs3_bit(int value);
-+#endif
-+
-+
-+
-+struct mq200_info {
-+ struct fb_info fb_info;
-+ struct mq200_io_regions io_regions;
-+ struct mq200_monitor_info monitor_info;
-+
-+ /* palette */
-+ u32 pseudo_palette[17]; /* 16 colors + 1 in reserve not that well documented... */
-+ spinlock_t lock;
-+};
-+
-+
-+
-+static int mq200_blank( int blank_mode, struct fb_info *info )
-+{
-+#ifdef CONFIG_SA1100_SIMPAD
-+ if(blank_mode ){
-+ clear_cs3_bit(DISPLAY_ON);
-+ }else {
-+ set_cs3_bit(DISPLAY_ON);
-+ }
-+#endif
-+ return 0;
-+}
-+
-+
-+static int mq200_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info )
-+{ /* TODO do we need sanity checks here */
-+ return 0;
-+}
-+
-+
-+static int mq200_set_par( struct fb_info *info )
-+{
-+ /* TODO set paraemeter */
-+ return 0;
-+}
-+
-+static int mq200_setcolreg(unsigned regno, unsigned red, unsigned green,
-+ unsigned blue, unsigned transp,
-+ struct fb_info *info )
-+{
-+ struct mq200_info *p;
-+ unsigned long color;
-+ u32* pal = info->pseudo_palette;
-+
-+ p = info->par;
-+
-+ if(regno > 255 )
-+ return 1;
-+
-+ switch( info->var.bits_per_pixel ){
-+ case 16:
-+ pal[regno] =
-+ ((red & 0xf800) >> 0) |
-+ ((green & 0xf800) >> 5) | ((blue & 0xf800) >> 11);
-+ break;
-+ case 24:
-+ pal[regno] =
-+ ((red & 0xff00) << 8) |
-+ ((green & 0xff00)) | ((blue & 0xff00) >> 8);
-+ break;
-+ case 32:
-+ pal[regno] =
-+ ((red & 0xff00) >> 8) |
-+ ((green & 0xff00)) | ((blue & 0xff00) << 8);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ red &= 0xFF;
-+ green &= 0xFF;
-+ blue &= 0xFF;
-+
-+ color = red | (green << 8) | (blue << 16);
-+ mq200_external_setpal(regno, color, p->io_regions.virt_mmio_base);
-+
-+ return 0;
-+}
-+
-+
-+static struct fb_ops mq200_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = mq200_check_var,
-+ .fb_set_par = mq200_set_par,
-+ .fb_setcolreg = mq200_setcolreg,
-+#ifdef FB_SOFT_CURSOR
-+ .fb_cursor = soft_cursor, /* FIXME use hardware cursor */
-+#endif
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+ .fb_blank = mq200_blank,
-+};
-+
-+
-+/*********************************************************************
-+ *
-+ * Device driver and module init code
-+ * this will register to the fb layer later
-+ *
-+ *********************************************************************/
-+static void mq200_internal_init_color( struct fb_bitfield* red,
-+ struct fb_bitfield* green,
-+ struct fb_bitfield* blue,
-+ int bpp )
-+{
-+ switch ( bpp )
-+ {
-+ case 16:
-+ red->offset = 11;
-+ green->offset = 5;
-+ blue->offset = 0;
-+
-+ red->length = 5;
-+ green->length = 6;
-+ blue->length = 5;
-+ break;
-+ case 24:
-+ red->offset = 16;
-+ green->offset = 8;
-+ blue->offset = 0;
-+
-+ red->length = 8;
-+ green->length = 8;
-+ blue->length = 8;
-+ break;
-+ case 32:
-+ red->offset = 0;
-+ green->offset = 8;
-+ blue->offset = 16;
-+
-+ red->length = 8;
-+ green->length = 8;
-+ blue->length = 8;
-+ case 8: /* fall through */
-+ default:
-+ red->offset = green->offset = blue->offset = 0;
-+ red->length = green->length = blue->length = bpp;
-+ break;
-+ }
-+
-+}
-+
-+
-+static struct mq200_info* __init mq200_internal_init_fbinfo(void)
-+{
-+ struct mq200_info *info = NULL;
-+
-+ info = (struct mq200_info*)kmalloc(sizeof(*info), GFP_KERNEL);
-+ if(!info)
-+ return NULL;
-+
-+ /*
-+ * Initialize memory
-+ */
-+ memset(info, 0, sizeof(struct mq200_info) );
-+ spin_lock_init(&info->lock);
-+
-+ /* set the base IO addresses */
-+ info->io_regions = MQ200_REGIONS;
-+ info->monitor_info = MQ200_MONITOR;
-+
-+ info->fb_info.screen_base = (char *)info->io_regions.virt_fb_base;
-+
-+ /* fb_fix_screeninfo filling */
-+ strcpy(info->fb_info.fix.id, "MQ200_FB" );
-+ info->fb_info.fix.smem_start = info->io_regions.phys_fb_base;
-+ info->fb_info.fix.smem_len = info->io_regions.fb_size; /* - CURSOR_IMAGE */
-+ info->fb_info.fix.mmio_start = info->io_regions.phys_mmio_base;
-+ info->fb_info.fix.mmio_len = MQ200_REGS_SIZE;
-+ info->fb_info.fix.type = FB_TYPE_PACKED_PIXELS;
-+ info->fb_info.fix.accel = FB_ACCEL_NONE;
-+ info->fb_info.fix.line_length = MQ200_MONITOR_LINE_LENGTH(info);
-+
-+ if(MQ200_MONITOR_DEPTH(info) <= 8 )
-+ info->fb_info.fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ else if( MQ200_MONITOR_DEPTH(info) >= 16 )
-+ info->fb_info.fix.visual = FB_VISUAL_DIRECTCOLOR;
-+ else
-+ panic("Calling mq200 with wrong display data\n");
-+
-+ /* set the variable screen info */
-+ info->fb_info.var.xres = MQ200_MONITOR_HORI_RES(info);
-+ info->fb_info.var.yres = MQ200_MONITOR_VERT_RES(info);
-+ info->fb_info.var.xres_virtual = MQ200_MONITOR_HORI_RES(info);
-+ info->fb_info.var.yres_virtual = MQ200_MONITOR_VERT_RES(info);
-+ info->fb_info.var.bits_per_pixel = MQ200_MONITOR_DEPTH(info);
-+
-+ mq200_internal_init_color(&info->fb_info.var.red,
-+ &info->fb_info.var.green,
-+ &info->fb_info.var.blue,
-+ MQ200_MONITOR_DEPTH(info) );
-+
-+ info->fb_info.var.transp.length = info->fb_info.var.transp.offset = 0;
-+ info->fb_info.var.height = info->fb_info.var.width = -1;
-+
-+ info->fb_info.var.vmode = FB_VMODE_NONINTERLACED;
-+ info->fb_info.var.pixclock = 10000;
-+ info->fb_info.var.left_margin = info->fb_info.var.right_margin = 16;
-+ info->fb_info.var.upper_margin = info->fb_info.var.lower_margin = 16;
-+ info->fb_info.var.hsync_len = info->fb_info.var.vsync_len = 8;
-+
-+ info->fb_info.var.nonstd = 0;
-+ info->fb_info.var.activate = FB_ACTIVATE_NOW;
-+ info->fb_info.var.accel_flags = 0;
-+
-+ return info;
-+}
-+
-+
-+extern void mq200_register_attributes(struct device* );
-+/*
-+ * gets called from the bus
-+ * we will register our framebuffer from here
-+ */
-+static int __init mq200_probe(struct device *dev)
-+{
-+ struct mq200_info *info = NULL;
-+ int retv= 0;
-+
-+ info = mq200_internal_init_fbinfo();
-+ if(!mq200_external_probe(info->io_regions.virt_mmio_base))
-+ goto error_out;
-+
-+ GPDR |= (1<<3);
-+ GAFR &= ~(1<<3);
-+ GPSR |= (1<<3);
-+
-+ mq200_external_setqmode(&info->monitor_info,
-+ info->io_regions.virt_mmio_base,
-+ &info->lock);
-+
-+ info->fb_info.fbops = &mq200_ops;
-+ info->fb_info.flags = FBINFO_FLAG_DEFAULT;
-+
-+ mq200_check_var(&info->fb_info.var, &info->fb_info );
-+
-+ fb_alloc_cmap(&info->fb_info.cmap, 1 << MQ200_MONITOR_DEPTH(info), 0 );
-+
-+ info->fb_info.pseudo_palette = (void*)info->pseudo_palette;
-+
-+ /* save the pointer to the mq200 struct in var */
-+ info->fb_info.par = info;
-+
-+ retv = register_framebuffer(&info->fb_info );
-+ if(retv < 0)
-+ goto error_out;
-+
-+
-+ /* will get unset if retv != 0 */
-+ dev_set_drvdata(dev, info );
-+ return retv;
-+
-+/*
-+ * Free the info and exit
-+ */
-+error_out:
-+ kfree(info);
-+ return -EINVAL;
-+}
-+
-+#ifdef CONFIG_PM
-+static struct mq200_info* get_mq200_info( struct device *dev)
-+{
-+ return dev_get_drvdata(dev);
-+}
-+
-+static unsigned long get_mmio_base( struct device *dev )
-+{
-+ struct mq200_info *info = get_mq200_info(dev);
-+ return info->io_regions.virt_mmio_base;
-+}
-+
-+static struct mq200_monitor_info* get_monitor_info( struct device *dev)
-+{
-+ struct mq200_info *info = get_mq200_info(dev);
-+ return &info->monitor_info;
-+}
-+
-+static spinlock_t* get_spinlock( struct device *dev)
-+{
-+ return &get_mq200_info(dev)->lock;
-+}
-+
-+/*
-+ * FIXME: make sure we only call mq200_external_offdisplay only once
-+ * a 2nd time will hang the kernel -zecke
-+ *
-+ * FIXME: save the content of the framebuffer inside dev->saved_state
-+ * so on resume we can memcpy it back into the buffer and userspace
-+ * does not need to redraw
-+ *
-+ * functions for suspending and resuming
-+ */
-+static int mq200_suspend(struct device *dev, pm_message_t state)
-+{
-+
-+ mq200_external_offdisplay( get_mmio_base(dev) );
-+ clear_cs3_bit(DISPLAY_ON);
-+
-+
-+ return 0;
-+}
-+
-+static int mq200_resume(struct device *dev)
-+{
-+ unsigned long mem = get_mmio_base(dev);
-+ struct mq200_monitor_info *monitor = get_monitor_info(dev);
-+ mq200_external_setqmode(monitor, mem, get_spinlock(dev) );
-+
-+
-+ /*
-+ * Set display on if it was on
-+ */
-+ set_cs3_bit(DISPLAY_ON);
-+
-+ return 0;
-+}
-+
-+
-+#endif
-+
-+
-+static struct device_driver mq200fb_driver = {
-+ .name = "simpad-mq200",
-+ .bus = &platform_bus_type,
-+ .probe = mq200_probe, /* will be called after we've registered the driver */
-+ .suspend = mq200_suspend,
-+ .resume = mq200_resume
-+};
-+
-+int __devinit mq200_init(void)
-+{
-+ return driver_register(&mq200fb_driver);
-+}
-+
-+module_init(mq200_init);
-+MODULE_DESCRIPTION("MQ200 framebuffer driver");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Holger Hans Peter Freyther");
diff --git a/packages/linux/linux/simpad/linux-2.6.20.SIMpad-ucb1x00-switches.patch b/packages/linux/linux/simpad/linux-2.6.20.SIMpad-ucb1x00-switches.patch
deleted file mode 100644
index 7cf2f28c89..0000000000
--- a/packages/linux/linux/simpad/linux-2.6.20.SIMpad-ucb1x00-switches.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-diff -uNr linux-2.6.20.vanilla/drivers/mfd/Kconfig linux-2.6.20/drivers/mfd/Kconfig
---- linux-2.6.20.vanilla/drivers/mfd/Kconfig 2007-02-10 19:01:56.000000000 +0100
-+++ linux-2.6.20/drivers/mfd/Kconfig 2007-02-28 16:36:01.000000000 +0100
-@@ -23,4 +23,7 @@
- tristate "Touchscreen interface support"
- depends on MCP_UCB1200 && INPUT
-
-+config MCP_UCB1200_SWITCHES
-+ tristate "SIMpad Switches support"
-+ depends on MCP_UCB1200 && INPUT
- endmenu
-diff -uNr linux-2.6.20.vanilla/drivers/mfd/Makefile linux-2.6.20/drivers/mfd/Makefile
---- linux-2.6.20.vanilla/drivers/mfd/Makefile 2007-02-10 19:01:56.000000000 +0100
-+++ linux-2.6.20/drivers/mfd/Makefile 2007-02-28 16:36:01.000000000 +0100
-@@ -6,7 +6,7 @@
- obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
- obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
- obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
--
-+obj-$(CONFIG_MCP_UCB1200_SWITCHES) += ucb1x00-switches.o
- ifeq ($(CONFIG_SA1100_ASSABET),y)
- obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
- endif
-diff -uNr linux-2.6.20.vanilla/drivers/mfd/ucb1x00-switches.c linux-2.6.20/drivers/mfd/ucb1x00-switches.c
---- linux-2.6.20.vanilla/drivers/mfd/ucb1x00-switches.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.20/drivers/mfd/ucb1x00-switches.c 2007-02-28 16:36:43.000000000 +0100
-@@ -0,0 +1,162 @@
-+/*
-+ * linux/drivers/mfd/ucb1x00-switches.c
-+ *
-+ * Copyright (C) 2007 Bernhard Guillon.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License.
-+ *
-+ * This driver is for the Switches of Siemens SIMpad (CL4,SL4,SLC), T-Sinus-Pad and
-+ * Swisscom WP50 devices.
-+ *
-+ * Six switches are routed to GPIO pins on the UCB1300: S3 -- S8.
-+ *
-+ * This driver is based on the 2.4 ucb1x00-switches, the 2.6 ucb1x00-assabet
-+ * and the ucb1x00-ts driver.
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/device.h>
-+
-+#include <asm/dma.h>
-+
-+#include "ucb1x00.h"
-+
-+static int key [6] = { KEY_PROG1,KEY_PROG2,KEY_UP,KEY_DOWN,KEY_LEFT,KEY_RIGHT };
-+
-+struct ucb1x00_switches {
-+ struct input_dev *idev;
-+ struct ucb1x00 *ucb;
-+};
-+
-+static void ucb1x00_dev_irq(int idx, void *id)
-+{
-+ static unsigned short int last;
-+ unsigned short int this;
-+ struct ucb1x00_switches *switches = id;
-+ struct input_dev *idev = switches->idev;
-+
-+ ucb1x00_enable(switches->ucb);
-+
-+ this=~ucb1x00_io_read(switches->ucb);
-+ if (this==last) {
-+ return;
-+ }
-+
-+ last=this;
-+
-+ if ((idx >=0) && (idx <=5)) {
-+ if ((this & (1<<idx)) != 0) input_report_key(idev, key[idx], 1);
-+ else input_report_key(idev, key[idx], 0);
-+ }
-+ else {
-+ printk(KERN_DEBUG "switches-ucb1x00 is BUGGY!!! \n");
-+ return;
-+ }
-+
-+}
-+
-+static int ucb1x00_switches_add(struct ucb1x00_dev *dev)
-+{
-+ struct ucb1x00_switches *switches;
-+ struct input_dev *idev;
-+ int err,i;
-+
-+ switches = kzalloc(sizeof(struct ucb1x00_switches), GFP_KERNEL);
-+ idev = input_allocate_device();
-+
-+ if (!switches || !idev) {
-+ err = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ switches->ucb = dev->ucb;
-+
-+ idev->private = switches;
-+ idev->name = "SIMpad Switches";
-+ idev->id.product = switches->ucb->id;
-+
-+ __set_bit(EV_KEY, idev->evbit);
-+ __set_bit(EV_REP, idev->evbit);
-+ __set_bit(KEY_PROG1, idev->keybit);
-+ __set_bit(KEY_PROG2, idev->keybit);
-+ __set_bit(KEY_UP, idev->keybit);
-+ __set_bit(KEY_DOWN, idev->keybit);
-+ __set_bit(KEY_LEFT, idev->keybit);
-+ __set_bit(KEY_RIGHT, idev->keybit);
-+
-+ err = input_register_device(idev);
-+ if (err)
-+ goto fail;
-+ switches->idev = idev;
-+ dev->priv = switches;
-+
-+ ucb1x00_enable(switches->ucb);
-+
-+ ucb1x00_io_set_dir(switches->ucb,
-+ UCB_IO_0 | UCB_IO_1 | UCB_IO_2 |
-+ UCB_IO_3 | UCB_IO_4 | UCB_IO_5,
-+ UCB_IO_8 | UCB_IO_9);
-+
-+ ucb1x00_disable(switches->ucb);
-+
-+ for (i = 0; i < 6; ++i) {
-+ ucb1x00_enable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
-+ if (ucb1x00_hook_irq(switches->ucb, i, ucb1x00_dev_irq, switches) < 0) {
-+ printk(KERN_ERR "unable to hook IRQ for "
-+ "UCB1300 SWITCH_%d\n", i);
-+ return -EBUSY;
-+ }
-+ }
-+
-+ return 0;
-+
-+fail:
-+ input_free_device(idev);
-+ kfree(switches);
-+ return err;
-+
-+}
-+
-+static void ucb1x00_switches_remove(struct ucb1x00_dev *dev)
-+{
-+ int i;
-+ struct ucb1x00_switches *switches = dev->priv;
-+ input_unregister_device(switches->idev);
-+
-+ for (i = 5; i >= 0; --i) {
-+ ucb1x00_disable_irq(switches->ucb, i, UCB_RISING | UCB_FALLING);
-+
-+ /* Only error conditions are ENOENT and EINVAL; silently
-+ * ignore:
-+ */
-+ ucb1x00_free_irq(switches->ucb, i, NULL);
-+ }
-+ ucb1x00_disable(switches->ucb);
-+ kfree(switches);
-+}
-+
-+static struct ucb1x00_driver ucb1x00_switches_driver = {
-+ .add = ucb1x00_switches_add,
-+ .remove = ucb1x00_switches_remove,
-+};
-+
-+static int __init ucb1x00_switches_init(void)
-+{
-+ return ucb1x00_register_driver(&ucb1x00_switches_driver);
-+}
-+
-+static void __exit ucb1x00_switches_exit(void)
-+{
-+ ucb1x00_unregister_driver(&ucb1x00_switches_driver);
-+}
-+
-+module_init(ucb1x00_switches_init);
-+module_exit(ucb1x00_switches_exit);
-+
-+MODULE_AUTHOR("Bernhard Guillon <Bernhard.Guillon@opensimpad.org>");
-+MODULE_DESCRIPTION("UCB1x00 Switches driver for Siemens SIMpad");
-+MODULE_LICENSE("GPL");
diff --git a/packages/linux/linux_2.6.20.bb b/packages/linux/linux_2.6.20.bb
index 178a44dd14..80f6c71442 100644
--- a/packages/linux/linux_2.6.20.bb
+++ b/packages/linux/linux_2.6.20.bb
@@ -1,19 +1,11 @@
DESCRIPTION = "Linux Kernel"
SECTION = "kernel"
LICENSE = "GPL"
-PR = "r5"
+PR = "r6"
SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2 \
file://defconfig"
-SRC_URI_append_progear = " \
- file://progear_bl-r6.patch;patch=1 \
- "
-SRC_URI_append_simpad = "\
- file://linux-2.6.20.SIMpad-battery.patch;patch=1\
- file://linux-2.6.20.SIMpad-mq200.patch;patch=1 \
- file://linux-2.6.20.SIMpad-ucb1x00-switches.patch;patch=1 \
- "
SRC_URI_append_n2100 = "\
file://n2100-r8169-parity.patch;patch=1 \
file://rtc-rs5c372-n2100.patch;patch=1 \
@@ -22,7 +14,6 @@ SRC_URI_append_n2100 = "\
inherit kernel
KERNEL_IMAGETYPE = "bzImage"
-KERNEL_IMAGETYPE_simpad = "zImage"
KERNEL_IMAGETYPE_n2100 = "zImage"
do_configure_prepend() {