binutils: add 2.16.91.0.7 (default pref = -1)

11 files changed, 604 insertions, 0 deletions

diff --git a/packages/binutils/binutils-2.16.91.0.7/.mtn2git_empty b/packages/binutils/binutils-2.16.91.0.7/.mtn2git_empty
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/.mtn2git_empty
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch
new file mode 100644
index 0000000000..4461bedd4e
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-2.16.91.0.6-objcopy-rename-errorcode.patch
@@ -0,0 +1,31 @@
+# strip (and objcopy) fail to set the error code if there is no
+# output file name and the rename of the stripped (or copied) file
+# fails, yet the command fails to do anything.  This fixes both
+# objcopy and strip.
+#
+# modification by bero: Ported to 2.16.91.0.6
+#
+#Signed-off-by: John Bowler <jbowler@acm.org>
+#Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
+--- binutils-2.16.91.0.6/binutils/objcopy.c.ark	2006-03-11 15:59:07.000000000 +0100
++++ binutils-2.16.91.0.6/binutils/objcopy.c	2006-03-11 15:59:45.000000000 +0100
+@@ -2593,7 +2593,8 @@
+ 	  if (preserve_dates)
+ 	    set_times (tmpname, &statbuf);
+ 	  if (output_file == NULL)
+-	    smart_rename (tmpname, argv[i], preserve_dates);
++	    if(smart_rename (tmpname, argv[i], preserve_dates))
++              hold_status = 1;
+ 	  status = hold_status;
+ 	}
+       else
+@@ -3184,7 +3185,8 @@
+ 	{
+ 	  if (preserve_dates)
+ 	    set_times (tmpname, &statbuf);
+-	  smart_rename (tmpname, input_filename, preserve_dates);
++	  if (smart_rename (tmpname, input_filename, preserve_dates))
++            status = 1;
+ 	}
+       else
+ 	unlink (tmpname);
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-100-uclibc-conf.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-100-uclibc-conf.patch
new file mode 100644
index 0000000000..25222e5df2
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-100-uclibc-conf.patch
@@ -0,0 +1,139 @@
+--- binutils-2.16.91.0.7/bfd/configure
++++ binutils-2.16.91.0.7/bfd/configure
+@@ -3576,7 +3576,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+--- binutils-2.16.91.0.7/binutils/configure
++++ binutils-2.16.91.0.7/binutils/configure
+@@ -3411,7 +3411,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+--- binutils-2.16.91.0.7/configure
++++ binutils-2.16.91.0.7/configure
+@@ -1270,7 +1270,7 @@
+   am33_2.0-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;
+-  sh-*-linux*)
++  sh*-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;    
+   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+@@ -1578,7 +1578,7 @@
+   romp-*-*)
+     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+     ;;
+-  sh-*-* | sh64-*-*)
++  sh*-*-* | sh64-*-*)
+     case "${host}" in
+       i[3456789]86-*-vsta) ;; # don't add gprof back in
+       i[3456789]86-*-go32*) ;; # don't add gprof back in
+--- binutils-2.16.91.0.7/configure.in
++++ binutils-2.16.91.0.7/configure.in
+@@ -468,7 +468,7 @@
+   am33_2.0-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;
+-  sh-*-linux*)
++  sh*-*-linux*)
+     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+     ;;    
+   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+@@ -776,7 +776,7 @@
+   romp-*-*)
+     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
+     ;;
+-  sh-*-* | sh64-*-*)
++  sh*-*-* | sh64-*-*)
+     case "${host}" in
+       i[[3456789]]86-*-vsta) ;; # don't add gprof back in
+       i[[3456789]]86-*-go32*) ;; # don't add gprof back in
+--- binutils-2.16.91.0.7/gas/configure
++++ binutils-2.16.91.0.7/gas/configure
+@@ -3411,7 +3411,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+--- binutils-2.16.91.0.7/gprof/configure
++++ binutils-2.16.91.0.7/gprof/configure
+@@ -3419,6 +3419,11 @@
+   lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+   ;;
+ 
++linux-uclibc*)
++  lt_cv_deplibs_check_method=pass_all
++  lt_cv_file_magic_test_file=`echo /lib/libuClibc-*.so`
++  ;;
++
+ netbsd* | knetbsd*-gnu)
+   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+     lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+--- binutils-2.16.91.0.7/ld/configure
++++ binutils-2.16.91.0.7/ld/configure
+@@ -3413,7 +3413,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+--- binutils-2.16.91.0.7/libtool.m4
++++ binutils-2.16.91.0.7/libtool.m4
+@@ -739,7 +739,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
+--- binutils-2.16.91.0.7/ltconfig
++++ binutils-2.16.91.0.7/ltconfig
+@@ -602,6 +602,7 @@
+ 
+ # Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+ case $host_os in
++linux-uclibc*) ;;
+ linux-gnu*) ;;
+ linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+ esac
+@@ -1247,7 +1248,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   version_type=linux
+   need_lib_prefix=no
+   need_version=no
+--- binutils-2.16.91.0.7/opcodes/configure
++++ binutils-2.16.91.0.7/opcodes/configure
+@@ -3579,7 +3579,7 @@
+   ;;
+ 
+ # This must be Linux ELF.
+-linux-gnu*)
++linux-gnu*|linux-uclibc*)
+   lt_cv_deplibs_check_method=pass_all
+   ;;
+ 
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-001_ld_makefile_patch.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-001_ld_makefile_patch.patch
new file mode 100644
index 0000000000..04a7e61e25
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-001_ld_makefile_patch.patch
@@ -0,0 +1,50 @@
+#!/bin/sh -e
+## 001_ld_makefile_patch.dpatch
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Description: correct where ld scripts are installed
+## DP: Author: Chris Chimelis <chris@debian.org>
+## DP: Upstream status: N/A
+## DP: Date: ??
+
+if [ $# -ne 1 ]; then
+    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+    exit 1
+fi
+
+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
+patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
+
+case "$1" in
+       -patch) patch $patch_opts -p1 < $0;;
+       -unpatch) patch $patch_opts -p1 -R < $0;;
+        *)
+                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+                exit 1;;
+esac
+
+exit 0
+
+@DPATCH@
+--- binutils-2.16.91.0.1/ld/Makefile.am
++++ binutils-2.16.91.0.1/ld/Makefile.am
+@@ -20,7 +20,7 @@
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ 
+ EMUL = @EMUL@
+ EMULATION_OFILES = @EMULATION_OFILES@
+--- binutils-2.16.91.0.1/ld/Makefile.in
++++ binutils-2.16.91.0.1/ld/Makefile.in
+@@ -268,7 +268,7 @@
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ BASEDIR = $(srcdir)/..
+ BFDDIR = $(BASEDIR)/bfd
+ INCDIR = $(BASEDIR)/include
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-006_better_file_error.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-006_better_file_error.patch
new file mode 100644
index 0000000000..f337611edf
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-006_better_file_error.patch
@@ -0,0 +1,43 @@
+#!/bin/sh -e
+## 006_better_file_error.dpatch by David Kimdon <dwhedon@gordian.com>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Specify which filename is causing an error if the filename is a
+## DP: directory. (#45832)
+
+if [ $# -ne 1 ]; then
+    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+    exit 1
+fi
+
+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
+patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
+
+case "$1" in
+       -patch) patch $patch_opts -p1 < $0;;
+       -unpatch) patch $patch_opts -p1 -R < $0;;
+        *)
+                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+                exit 1;;
+esac
+
+exit 0
+
+@DPATCH@
+diff -urNad /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c binutils-2.14.90.0.6/bfd/opncls.c
+--- /home/james/debian/packages/binutils/binutils-2.14.90.0.6/bfd/opncls.c	2003-07-23 16:08:09.000000000 +0100
++++ binutils-2.14.90.0.6/bfd/opncls.c	2003-09-10 22:35:00.000000000 +0100
+@@ -150,6 +150,13 @@
+ {
+   bfd *nbfd;
+   const bfd_target *target_vec;
++  struct stat s;
++
++  if (stat (filename, &s) == 0)
++    if (S_ISDIR(s.st_mode)) {
++      bfd_set_error (bfd_error_file_not_recognized);
++      return NULL;
++    }
+ 
+   nbfd = _bfd_new_bfd ();
+   if (nbfd == NULL)
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-012_check_ldrunpath_length.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-012_check_ldrunpath_length.patch
new file mode 100644
index 0000000000..498651a90c
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-300-012_check_ldrunpath_length.patch
@@ -0,0 +1,47 @@
+#!/bin/sh -e
+## 012_check_ldrunpath_length.dpatch by Chris Chimelis <chris@debian.org>
+##
+## All lines beginning with `## DP:' are a description of the patch.
+## DP: Only generate an RPATH entry if LD_RUN_PATH is not empty, for
+## DP: cases where -rpath isn't specified. (#151024)
+
+if [ $# -ne 1 ]; then
+    echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+    exit 1
+fi
+
+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts
+patch_opts="${patch_opts:--f --no-backup-if-mismatch}"
+
+case "$1" in
+       -patch) patch $patch_opts -p1 < $0;;
+       -unpatch) patch $patch_opts -p1 -R < $0;;
+        *)
+                echo >&2 "`basename $0`: script expects -patch|-unpatch as argument"
+                exit 1;;
+esac
+
+exit 0
+
+@DPATCH@
+diff -urNad /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em binutils-2.15/ld/emultempl/elf32.em
+--- /home/james/debian/packages/binutils/new/binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:58.000000000 +0100
++++ binutils-2.15/ld/emultempl/elf32.em	2004-05-21 23:12:59.000000000 +0100
+@@ -692,6 +692,8 @@
+ 	      && command_line.rpath == NULL)
+ 	    {
+ 	      lib_path = (const char *) getenv ("LD_RUN_PATH");
++	      if ((lib_path) && (strlen (lib_path) == 0))
++		  lib_path = NULL;
+ 	      if (gld${EMULATION_NAME}_search_needed (lib_path, &n,
+ 						      force))
+ 		break;
+@@ -871,6 +873,8 @@
+   rpath = command_line.rpath;
+   if (rpath == NULL)
+     rpath = (const char *) getenv ("LD_RUN_PATH");
++  if ((rpath) && (strlen (rpath) == 0))
++      rpath = NULL;
+   if (! (bfd_elf_size_dynamic_sections
+ 	 (output_bfd, command_line.soname, rpath,
+ 	  command_line.filter_shlib,
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch
new file mode 100644
index 0000000000..5959c718d2
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch
@@ -0,0 +1,26 @@
+--- binutils/bfd/elf32-mips.c~
++++ binutils/bfd/elf32-mips.c
+@@ -1613,7 +1613,9 @@
+ 
+ /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
+    page sizes of up to that limit, so we need to respect it.  */
+-#define ELF_MAXPAGESIZE			0x10000
++/*#define ELF_MAXPAGESIZE			0x10000*/
++/* Use 4K to shrink the elf header.  NOT for general use! */
++#define ELF_MAXPAGESIZE			0x1000
+ #define elf32_bed			elf32_tradbed
+ 
+ /* Include the target file again for this target.  */
+--- binutils/bfd/elfn32-mips.c~
++++ binutils/bfd/elfn32-mips.c
+@@ -2399,7 +2399,9 @@
+ 
+ /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses
+    page sizes of up to that limit, so we need to respect it.  */
+-#define ELF_MAXPAGESIZE			0x10000
++/*#define ELF_MAXPAGESIZE			0x10000*/
++/* Use 4K to shrink the elf header.  NOT for general use! */
++#define ELF_MAXPAGESIZE			0x1000
+ #define elf32_bed			elf32_tradbed
+ 
+ /* Include the target file again for this target.  */
diff --git a/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-702-binutils-skip-comments.patch b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-702-binutils-skip-comments.patch
new file mode 100644
index 0000000000..9ef7a7c9ec
--- /dev/null
+++ b/packages/binutils/binutils-2.16.91.0.7/binutils-uclibc-702-binutils-skip-comments.patch
@@ -0,0 +1,93 @@
+Retrieved from http://sources.redhat.com/ml/binutils/2004-04/msg00646.html
+Fixes
+localealias.s:544: Error: junk at end of line, first unrecognized character is `,' 
+when building glibc-2.3.2 with gcc-3.4.0 and binutils-2.15.90.0.3
+
+Paths adjusted to match crosstool's patcher.
+
+Message-Id: m3n052qw2g.fsf@whitebox.m5r.de
+From: Andreas Schwab <schwab at suse dot de>
+To: Nathan Sidwell <nathan at codesourcery dot com>
+Cc: Ian Lance Taylor <ian at wasabisystems dot com>, binutils at sources dot redhat dot com
+Date: Fri, 23 Apr 2004 22:27:19 +0200
+Subject: Re: demand_empty_rest_of_line and ignore_rest_of_line
+
+Nathan Sidwell <nathan@codesourcery.com> writes:
+
+> Index: read.c
+> ===================================================================
+> RCS file: /cvs/src/src/gas/read.c,v
+> retrieving revision 1.76
+> diff -c -3 -p -r1.76 read.c
+> *** read.c	12 Mar 2004 17:48:12 -0000	1.76
+> --- read.c	18 Mar 2004 09:56:05 -0000
+> *************** read_a_source_file (char *name)
+> *** 1053,1059 ****
+>   #endif
+>   	  input_line_pointer--;
+>   	  /* Report unknown char as ignored.  */
+> ! 	  ignore_rest_of_line ();
+>   	}
+>   
+>   #ifdef md_after_pass_hook
+> --- 1053,1059 ----
+>   #endif
+>   	  input_line_pointer--;
+>   	  /* Report unknown char as ignored.  */
+> ! 	  demand_empty_rest_of_line ();
+>   	}
+>   
+>   #ifdef md_after_pass_hook
+
+This means that the unknown character is no longer ignored, despite the
+comment.  As a side effect a line starting with a line comment character
+not followed by APP in NO_APP mode now triggers an error instead of just a
+warning, breaking builds of glibc on m68k-linux.  Earlier in
+read_a_source_file where #APP is handled there is another comment that
+claims that unknown comments are ignored, when in fact they aren't (only
+the initial line comment character is skipped).
+
+Note that the presence of #APP will mess up the line counters, but
+that appears to be difficult to fix.
+
+Andreas.
+
+2004-04-23  Andreas Schwab  <schwab@suse.de>
+
+	* read.c (read_a_source_file): Ignore unknown text after line
+	comment character.  Fix misleading comment.
+
+--- binutils/gas/read.c.~1.78.~	2004-04-23 08:58:23.000000000 +0200
++++ binutils/gas/read.c	2004-04-23 21:49:01.000000000 +0200
+@@ -950,10 +950,14 @@ read_a_source_file (char *name)
+ 	      unsigned int new_length;
+ 	      char *tmp_buf = 0;
+ 
+-	      bump_line_counters ();
+ 	      s = input_line_pointer;
+ 	      if (strncmp (s, "APP\n", 4))
+-		continue;	/* We ignore it */
++		{
++		  /* We ignore it */
++		  ignore_rest_of_line ();
++		  continue;
++		}
++	      bump_line_counters ();
+ 	      s += 4;
+ 
+ 	      sb_new (&sbuf);
+@@ -1052,7 +1056,7 @@ read_a_source_file (char *name)
+ 	    continue;
+ #endif
+ 	  input_line_pointer--;
+-	  /* Report unknown char as ignored.  */
++	  /* Report unknown char as error.  */
+ 	  demand_empty_rest_of_line ();
+ 	}
+ 
+
+-- 
+Andreas Schwab, SuSE Labs, schwab@suse.de
+SuSE Linux AG, Maxfeldstra&#xC3;e 5, 90409 N&#xC3;rnberg, Germany
+Key fingerprint = 58CA 54C7 6D53 942B 1756  01D3 44D5 214B 8276 4ED5
+"And now for something completely different."
diff --git a/packages/binutils/binutils-cross-sdk_2.16.91.0.7.bb b/packages/binutils/binutils-cross-sdk_2.16.91.0.7.bb
new file mode 100644
index 0000000000..714e3ce7ef
--- /dev/null
+++ b/packages/binutils/binutils-cross-sdk_2.16.91.0.7.bb
@@ -0,0 +1,20 @@
+SECTION = "devel"
+include binutils_${PV}.bb
+inherit sdk
+DEPENDS += "flex-native bison-native"
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+EXTRA_OECONF = "--with-sysroot=${CROSS_DIR}/${TARGET_SYS} \
+		--program-prefix=${TARGET_PREFIX}"
+
+do_stage() {
+	:
+}
+
+do_install () {
+        autotools_do_install
+                                                                               
+        # Install the libiberty header
+        install -d ${D}${includedir}
+        install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
+        install -m 644 ${S}/include/libiberty.h ${D}${includedir}
+}
diff --git a/packages/binutils/binutils-cross_2.16.91.0.7.bb b/packages/binutils/binutils-cross_2.16.91.0.7.bb
new file mode 100644
index 0000000000..7e165271d7
--- /dev/null
+++ b/packages/binutils/binutils-cross_2.16.91.0.7.bb
@@ -0,0 +1,32 @@
+SECTION = "devel"
+include binutils_${PV}.bb
+inherit cross
+DEPENDS += "flex-native bison-native"
+PROVIDES = "virtual/${TARGET_PREFIX}binutils"
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/binutils-${PV}"
+PACKAGES = ""
+EXTRA_OECONF = "--with-sysroot=${CROSS_DIR}/${TARGET_SYS} \
+		--program-prefix=${TARGET_PREFIX}"
+
+do_stage () {
+	oe_runmake install
+
+	# We don't really need these, so we'll remove them...
+	rm -rf ${CROSS_DIR}/lib/ldscripts
+	rm -rf ${CROSS_DIR}/share/info
+	rm -rf ${CROSS_DIR}/share/locale
+	rm -rf ${CROSS_DIR}/share/man
+	rmdir ${CROSS_DIR}/share || :
+	rmdir ${CROSS_DIR}/${libdir}/gcc-lib || :
+	rmdir ${CROSS_DIR}/${libdir} || :
+	rmdir ${CROSS_DIR}/${prefix} || :
+
+	# We want to move this into the target specific location
+	mkdir -p ${CROSS_DIR}/${TARGET_SYS}/lib
+	mv -f ${CROSS_DIR}/lib/libiberty.a ${CROSS_DIR}/${TARGET_SYS}/lib
+	rmdir ${CROSS_DIR}/lib || :
+}
+
+do_install () {
+	:
+}
diff --git a/packages/binutils/binutils_2.16.91.0.7.bb b/packages/binutils/binutils_2.16.91.0.7.bb
new file mode 100644
index 0000000000..664fce8cb7
--- /dev/null
+++ b/packages/binutils/binutils_2.16.91.0.7.bb
@@ -0,0 +1,123 @@
+DESCRIPTION = "A GNU collection of binary utilities"
+HOMEPAGE = "http://www.gnu.org/software/binutils/"
+SECTION = "devel"
+LICENSE = "GPL"
+DEFAULT_PREFERENCE = "-1"
+
+inherit autotools gettext
+
+PACKAGES = "${PN} ${PN}-dev ${PN}-doc ${PN}-symlinks"
+
+FILES_${PN} = " \
+	${bindir}/${TARGET_PREFIX}* \
+	${libdir}/lib*-*.so \
+	${prefix}/${TARGET_SYS}/bin/*"
+
+FILES_${PN}-dev = " \
+	${includedir} \
+	${libdir}/*.a \
+	${libdir}/*.la \
+	${libdir}/libbfd.so \
+	${libdir}/libopcodes.so"
+
+FILES_${PN}-symlinks = " \
+	${bindir}/addr2line \
+	${bindir}/ar \
+	${bindir}/as \
+	${bindir}/c++filt \
+	${bindir}/gprof \
+	${bindir}/ld \
+	${bindir}/nm \
+	${bindir}/objcopy \
+	${bindir}/objdump \
+	${bindir}/ranlib \
+	${bindir}/readelf \
+	${bindir}/size \
+	${bindir}/strings \
+	${bindir}/strip"
+
+SRC_URI = \
+    "http://ftp.kernel.org/pub/linux/devel/binutils/binutils-${PV}.tar.bz2 \
+     file://binutils-2.16.91.0.6-objcopy-rename-errorcode.patch;patch=1 \
+     file://binutils-uclibc-100-uclibc-conf.patch;patch=1 \
+     file://binutils-uclibc-300-001_ld_makefile_patch.patch;patch=1 \
+     file://binutils-uclibc-300-006_better_file_error.patch;patch=1 \
+     file://binutils-uclibc-300-012_check_ldrunpath_length.patch;patch=1 \
+     file://binutils-uclibc-400-mips-ELF_MAXPAGESIZE-4K.patch;patch=1 \
+     file://binutils-uclibc-702-binutils-skip-comments.patch;patch=1"
+
+S = "${WORKDIR}/binutils-${PV}"
+B = "${S}/build.${HOST_SYS}.${TARGET_SYS}"
+
+EXTRA_OECONF = "--program-prefix=${TARGET_PREFIX} \
+		--enable-shared"
+
+# This is necessary due to a bug in the binutils Makefiles
+EXTRA_OEMAKE = "configure-build-libiberty all"
+
+export AR = "${HOST_PREFIX}ar"
+export AS = "${HOST_PREFIX}as"
+export LD = "${HOST_PREFIX}ld"
+export NM = "${HOST_PREFIX}nm"
+export RANLIB = "${HOST_PREFIX}ranlib"
+export OBJCOPY = "${HOST_PREFIX}objcopy"
+export OBJDUMP = "${HOST_PREFIX}objdump"
+
+export AR_FOR_TARGET = "${TARGET_PREFIX}ar"
+export AS_FOR_TARGET = "${TARGET_PREFIX}as"
+export LD_FOR_TARGET = "${TARGET_PREFIX}ld"
+export NM_FOR_TARGET = "${TARGET_PREFIX}nm"
+export RANLIB_FOR_TARGET = "${TARGET_PREFIX}ranlib"
+
+export CC_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
+export CXX_FOR_HOST = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
+
+export CC_FOR_BUILD = "${BUILD_CC}"
+export CPP_FOR_BUILD = "${BUILD_CPP}"
+export CFLAGS_FOR_BUILD = "${BUILD_CFLAGS}"
+
+export CC = "${CCACHE} ${HOST_PREFIX}gcc ${HOST_CC_ARCH}"
+
+do_configure () {
+	(cd ${S}; gnu-configize) || die "Failed to run gnu-configize"
+	oe_runconf
+}
+
+do_stage () {
+	oe_libinstall -so -a -C opcodes libopcodes ${STAGING_LIBDIR}/
+	oe_libinstall -a -C libiberty libiberty ${STAGING_LIBDIR}/
+	oe_libinstall -so -a -C bfd libbfd ${STAGING_LIBDIR}/
+	install -m 0644 ${S}/include/dis-asm.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/symcat.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/libiberty.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/ansidecl.h ${STAGING_INCDIR}/
+	install -m 0644 ${S}/include/bfdlink.h ${STAGING_INCDIR}/
+	install -m 0644 bfd/bfd.h ${STAGING_INCDIR}/
+}
+
+do_install () {
+	autotools_do_install
+
+	# We don't really need these, so we'll remove them...
+	rm -rf ${D}${libdir}/ldscripts
+
+	# Fix the /usr/${TARGET_SYS}/bin/* links
+	for l in ${D}${prefix}/${TARGET_SYS}/bin/*; do
+		rm -f $l
+		ln -sf `echo ${prefix}/${TARGET_SYS}/bin \
+			| tr -s / \
+			| sed -e 's,^/,,' -e 's,[^/]*,..,g'`${bindir}/${TARGET_PREFIX}`basename $l` $l
+	done
+
+	# Install the libiberty header
+	install -d ${D}${includedir}
+	install -m 644 ${S}/include/ansidecl.h ${D}${includedir}
+	install -m 644 ${S}/include/libiberty.h ${D}${includedir}
+
+	cd ${D}${bindir}
+
+	# Symlinks for ease of running these on the native target
+	for p in ${TARGET_SYS}-* ; do
+		ln -sf $p `echo $p | sed -e s,${TARGET_SYS}-,,`
+	done
+}