linux-rp-2.6.21: Add missing files (from poky)

18 files changed, 23902 insertions, 0 deletions

diff --git a/packages/linux/linux-rp-2.6.21/connectplus-remove-ide-HACK.patch b/packages/linux/linux-rp-2.6.21/connectplus-remove-ide-HACK.patch
new file mode 100644
index 0000000000..4414b21191
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/connectplus-remove-ide-HACK.patch
@@ -0,0 +1,12 @@
+Index: linux-2.6.13/drivers/ide/legacy/ide-cs.c
+===================================================================
+--- linux-2.6.13.orig/drivers/ide/legacy/ide-cs.c	2005-09-01 22:43:46.000000000 +0100
++++ linux-2.6.13/drivers/ide/legacy/ide-cs.c	2005-09-01 22:45:46.000000000 +0100
+@@ -488,7 +488,6 @@
+ 	PCMCIA_DEVICE_PROD_ID123("KODAK Picture Card       ", "KODAK  ", "V100K", 0x94a0d8f3, 0xe4fc3ea0, 0xe5e7eed4),
+ 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
+ 	PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
+-	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
+ 	PCMCIA_DEVICE_NULL,
+ };
+ MODULE_DEVICE_TABLE(pcmcia, ide_ids);
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-akita b/packages/linux/linux-rp-2.6.21/defconfig-akita
new file mode 100644
index 0000000000..748ab41d22
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-akita
@@ -0,0 +1,1743 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Mar 29 12:24:24 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_PXA_SHARPSL_25x is not set
+CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_SPITZ=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_KEYS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2  fbcon=rotate:1 dyntick=enable quiet"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_SPITZ=y
+# CONFIG_LEDS_TOSA is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_DETECT is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=m
+
+
+#
+# Soc Platforms
+#
+CONFIG_SND_PXA2xx_SOC=m
+CONFIG_SND_PXA2xx_SOC_I2S=m
+CONFIG_SND_PXA2xx_SOC_SPITZ=m
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_SPITZ=m
+# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+
+#
+# Soc Codecs
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8976 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+# CONFIG_SND_SOC_WM9713 is not set
+# CONFIG_SND_SOC_WM9712 is not set
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+CONFIG_USB_CYTHERM=m
+# CONFIG_USB_PHIDGET is not set
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=m
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_LZO=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+CONFIG_SHARPSL_RC=m
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-bootcdx86 b/packages/linux/linux-rp-2.6.21/defconfig-bootcdx86
new file mode 100644
index 0000000000..d439d89813
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-bootcdx86
@@ -0,0 +1,1606 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Mon Jun 11 12:01:43 2007
+#
+CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+CONFIG_MPENTIUMII=y
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_INTEL_USERCOPY=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
+CONFIG_HPET_TIMER=y
+CONFIG_NR_CPUS=8
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_NONFATAL=y
+CONFIG_X86_MCE_P4THERMAL=y
+CONFIG_VM86=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MTRR=y
+# CONFIG_EFI is not set
+CONFIG_IRQBALANCE=y
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_RELOCATABLE is not set
+CONFIG_PHYSICAL_ALIGN=0x100000
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_COMPAT_VDSO is not set
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_PROCFS=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+# CONFIG_ACPI_DOCK is not set
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_ASUS is not set
+# CONFIG_ACPI_IBM is not set
+# CONFIG_ACPI_TOSHIBA is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_X86_PM_TIMER=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCI_MSI=y
+CONFIG_HT_IRQ=y
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+# CONFIG_SCx200 is not set
+CONFIG_K8_NB=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+# CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_SONY_LAPTOP is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Macintosh device drivers
+#
+# CONFIG_MAC_EMUMOUSEBTN is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+# CONFIG_EL3 is not set
+# CONFIG_3C515 is not set
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+CONFIG_LANCE=m
+CONFIG_NET_VENDOR_SMC=y
+CONFIG_WD80x3=m
+CONFIG_ULTRA=m
+CONFIG_SMC9194=m
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=m
+CONFIG_TULIP_MWI=y
+CONFIG_TULIP_MMIO=y
+CONFIG_TULIP_NAPI=y
+CONFIG_TULIP_NAPI_HW_MITIGATION=y
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_AT1700=m
+CONFIG_DEPCA=m
+CONFIG_HP100=m
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_PCNET32_NAPI=y
+CONFIG_AMD8111_ETH=m
+CONFIG_AMD8111E_NAPI=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_ADAPTEC_STARFIRE_NAPI=y
+CONFIG_AC3200=m
+CONFIG_APRICOT=m
+CONFIG_B44=m
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+CONFIG_CS89x0=m
+CONFIG_DGRS=m
+CONFIG_EEPRO100=m
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_8139TOO_PIO=y
+CONFIG_8139TOO_TUNE_TWISTER=y
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+CONFIG_SUNDANCE_MMIO=y
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_RHINE_NAPI=y
+CONFIG_SC92031=m
+
+#
+# Ethernet (1000 Mbit)
+#
+CONFIG_ACENIC=m
+CONFIG_ACENIC_OMIT_TIGON_I=y
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_NAPI=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+CONFIG_SKY2=m
+CONFIG_SK98LIN=m
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+CONFIG_AGP=m
+CONFIG_AGP_ALI=m
+CONFIG_AGP_ATI=m
+CONFIG_AGP_AMD=m
+CONFIG_AGP_AMD64=m
+CONFIG_AGP_INTEL=m
+CONFIG_AGP_NVIDIA=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_SWORKS=m
+CONFIG_AGP_VIA=m
+CONFIG_AGP_EFFICEON=m
+# CONFIG_DRM is not set
+# CONFIG_DRM_I830 is not set
+# CONFIG_DRM_I915 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multi-Function Devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=y
+CONFIG_FB_VESA=y
+# CONFIG_FB_VESA_STD is not set
+CONFIG_FB_VESA_TNG=y
+CONFIG_FB_VESA_DEFAULT_MODE="640x480-16@60"
+CONFIG_VIDEO_SELECT=y
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ISA devices
+#
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AC97_POWER_SAVE=y
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_SPLIT_ISO=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_WACOM=y
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+# CONFIG_KVM is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf-8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+CONFIG_CRYPTO_DEV_PADLOCK=m
+CONFIG_CRYPTO_DEV_PADLOCK_AES=m
+CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
+CONFIG_CRYPTO_DEV_GEODE=m
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+# CONFIG_LZO is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+CONFIG_KTIME_SCALAR=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-c7x0 b/packages/linux/linux-rp-2.6.21/defconfig-c7x0
new file mode 100644
index 0000000000..e8efdd4de2
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-c7x0
@@ -0,0 +1,1786 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Mar 29 13:32:11 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_HX2750 is not set
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+# CONFIG_MACH_POODLE is not set
+CONFIG_MACH_CORGI=y
+CONFIG_MACH_SHEPHERD=y
+CONFIG_MACH_HUSKY=y
+# CONFIG_MACH_TOSA is not set
+CONFIG_PXA25x=y
+CONFIG_PXA_SHARP_C7xx=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_KEYS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   dyntick=enable quiet"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_CPU_FREQ_PXA25x=y
+CONFIG_KEXEC=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_CORGI=y
+# CONFIG_KEYBOARD_SPITZ is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_CORGI=y
+# CONFIG_LEDS_TOSA is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_W9968CF is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+
+#
+# Radio Adapters
+#
+CONFIG_USB_DSBR=m
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_MBX is not set
+CONFIG_FB_W100=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_DETECT is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=m
+
+#
+# Soc Platforms
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_CORGI=m
+# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Freescale i.MX
+#
+
+#
+# SoC Audio for the Samsung S3C24XX
+#
+
+#
+# Soc Codecs
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+CONFIG_SND_SOC_WM8731=m
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8956 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8976 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8980 is not set
+# CONFIG_SND_SOC_WM9713 is not set
+# CONFIG_SND_SOC_WM9712 is not set
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+CONFIG_USB_CYTHERM=m
+# CONFIG_USB_PHIDGET is not set
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_LZO=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-collie b/packages/linux/linux-rp-2.6.21/defconfig-collie
new file mode 100644
index 0000000000..422ed94df3
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-collie
@@ -0,0 +1,1739 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20.4
+# Fri Apr  6 23:20:59 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SA1100=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=2
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_SA1100_FIR=m
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+CONFIG_MTD_SHARP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_LOCOMO=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_MCP=y
+CONFIG_MCP_SA11X0=y
+CONFIG_MCP_UCB1200=y
+CONFIG_MCP_UCB1200_TS=m
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LOCOMO=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_USB_DSBR is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=m
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=m
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_SPI=m
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=m
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_LZO=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-hx2000 b/packages/linux/linux-rp-2.6.21/defconfig-hx2000
new file mode 100644
index 0000000000..2a67a2d045
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-hx2000
@@ -0,0 +1,1165 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc2
+# Mon Jan  1 01:49:04 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+CONFIG_MACH_HX2750=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_KEYS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   dyntick=enable debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_TSC2101=y
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# Multi-Function Devices
+#
+CONFIG_MFD_TSC2101=y
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_HX2750=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-poodle b/packages/linux/linux-rp-2.6.21/defconfig-poodle
new file mode 100644
index 0000000000..13616c08f1
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-poodle
@@ -0,0 +1,1656 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Jul 10 23:38:56 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_MACH_HX2750 is not set
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+CONFIG_MACH_POODLE=y
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
+# CONFIG_MACH_TOSA is not set
+CONFIG_PXA25x=y
+# CONFIG_PXA_KEYS is not set
+CONFIG_PXA_SSP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_KEXEC=y
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2  fbcon=rotate:1 dyntick=enable debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_PXA25x=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+# CONFIG_KEYBOARD_SPITZ is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_LOCOMO=y
+# CONFIG_LEDS_TOSA is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Encoders and Decoders
+#
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+
+#
+# V4L USB devices
+#
+# CONFIG_VIDEO_EM28XX is not set
+CONFIG_USB_DSBR=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_OHAND_CLUT224 is not set
+CONFIG_LOGO_OZ240_CLUT224=y
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_LOCOMO=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=m
+
+#
+# Soc Platforms
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2xx_SOC=m
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8731 is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8753 is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8974 is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9713 is not set
+# CONFIG_SND_MAINSTONE_BASEBAND is not set
+# CONFIG_SND_MAINSTONE_BLUETOOTH is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9712 is not set
+# CONFIG_SND_PXA2xx_SOC_CORGI is not set
+# CONFIG_SND_PXA2xx_SOC_SPITZ is not set
+CONFIG_SND_PXA2xx_SOC_POODLE=m
+# CONFIG_SND_PXA2xx_SOC_TOSA is not set
+
+#
+# Soc Codecs
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+CONFIG_SND_SOC_WM8731=m
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM9713 is not set
+# CONFIG_SND_SOC_WM9712 is not set
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-qemuarm b/packages/linux/linux-rp-2.6.21/defconfig-qemuarm
new file mode 100644
index 0000000000..f70b6db7c7
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-qemuarm
@@ -0,0 +1,1193 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Aug 26 22:45:02 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_VERSATILE=y
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Versatile platform type
+#
+CONFIG_ARCH_VERSATILE_PB=y
+# CONFIG_MACH_VERSATILE_AB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_KEXEC is not set
+CONFIG_ARM_VIC=y
+CONFIG_ICST307=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+CONFIG_PCI=y
+# CONFIG_PCI_DEBUG is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   dyntick=enable debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=51200
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+# CONFIG_LEDS_CLASS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_WACOM=y
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-qemux86 b/packages/linux/linux-rp-2.6.21/defconfig-qemux86
new file mode 100644
index 0000000000..08e0a0c6c7
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-qemux86
@@ -0,0 +1,1567 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Mon Oct 16 19:42:42 2006
+#
+CONFIG_X86_32=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_X86=y
+CONFIG_MMU=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_DMI=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_VM86=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Processor type and features
+#
+CONFIG_SMP=y
+CONFIG_X86_PC=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_VOYAGER is not set
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_BIGSMP is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_GENERICARCH is not set
+# CONFIG_X86_ES7000 is not set
+CONFIG_M386=y
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+CONFIG_X86_GENERIC=y
+CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_F00F_BUG=y
+CONFIG_X86_INTEL_USERCOPY=y
+# CONFIG_HPET_TIMER is not set
+CONFIG_NR_CPUS=8
+CONFIG_SCHED_SMT=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
+CONFIG_X86_LOCAL_APIC=y
+CONFIG_X86_IO_APIC=y
+CONFIG_X86_MCE=y
+CONFIG_X86_MCE_NONFATAL=y
+CONFIG_X86_MCE_P4THERMAL=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_X86_REBOOTFIXUPS is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_EDD is not set
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MATH_EMULATION is not set
+CONFIG_MTRR=y
+# CONFIG_EFI is not set
+CONFIG_IRQBALANCE=y
+# CONFIG_REGPARM is not set
+CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_HOTPLUG_CPU is not set
+
+#
+# Power management options (ACPI, APM)
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_BATTERY=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_HOTKEY is not set
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_ASUS is not set
+CONFIG_ACPI_IBM=m
+# CONFIG_ACPI_IBM_DOCK is not set
+# CONFIG_ACPI_TOSHIBA is not set
+CONFIG_ACPI_BLACKLIST_YEAR=0
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_SYSTEM=y
+CONFIG_X86_PM_TIMER=y
+# CONFIG_ACPI_CONTAINER is not set
+
+#
+# APM (Advanced Power Management) BIOS Support
+#
+# CONFIG_APM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_MMCONFIG=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCI_MSI is not set
+CONFIG_ISA_DMA_API=y
+CONFIG_ISA=y
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+# CONFIG_SCx200 is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+# CONFIG_IP_NF_FTP is not set
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=y
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=y
+# CONFIG_PARPORT_SERIAL is not set
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+# CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
+CONFIG_PNPACPI=y
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=51200
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_CMD640=y
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_RZ1000=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_DPT_I2O=m
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_SCSI_ATA_PIIX=y
+# CONFIG_SCSI_SATA_MV is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+CONFIG_SCSI_SATA_SX4=m
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
+CONFIG_SCSI_SATA_SIS=m
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=y
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=y
+
+#
+# Protocol Drivers
+#
+# CONFIG_IEEE1394_VIDEO1394 is not set
+# CONFIG_IEEE1394_SBP2 is not set
+# CONFIG_IEEE1394_ETH1394 is not set
+# CONFIG_IEEE1394_DV1394 is not set
+CONFIG_IEEE1394_RAWIO=y
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_NET_SB1000 is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+# CONFIG_EWRK3 is not set
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=y
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+CONFIG_NE2K_PCI=y
+# CONFIG_8139CP is not set
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+CONFIG_S2IO=m
+# CONFIG_S2IO_NAPI is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_POWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PRINTER=y
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_TIPAR is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+CONFIG_AGP=y
+# CONFIG_AGP_ALI is not set
+# CONFIG_AGP_ATI is not set
+# CONFIG_AGP_AMD is not set
+# CONFIG_AGP_AMD64 is not set
+CONFIG_AGP_INTEL=y
+# CONFIG_AGP_NVIDIA is not set
+# CONFIG_AGP_SIS is not set
+# CONFIG_AGP_SWORKS is not set
+# CONFIG_AGP_VIA is not set
+# CONFIG_AGP_EFFICEON is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_I810 is not set
+# CONFIG_DRM_I830 is not set
+# CONFIG_DRM_I915 is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
+# CONFIG_MWAVE is not set
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_HPET is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_IBM_ASM is not set
+
+#
+# Multi-Function Devices
+#
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+CONFIG_FB_VGA16=y
+CONFIG_FB_VESA=y
+# CONFIG_FB_VESA_STD is not set
+CONFIG_FB_VESA_TNG=y
+CONFIG_FB_VESA_DEFAULT_MODE="640x480-32@60"
+CONFIG_VIDEO_SELECT=y
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_I810 is not set
+# CONFIG_FB_INTEL is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ISA devices
+#
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+
+#
+# SoC audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_AIPTEK is not set
+CONFIG_USB_WACOM=y
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+CONFIG_USB_CYTHERM=m
+# CONFIG_USB_PHIDGETKIT is not set
+CONFIG_USB_PHIDGETSERVO=m
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Instrumentation Support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_STACK_BACKTRACE_COLS=2
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
+CONFIG_DOUBLEFAULT=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
+CONFIG_X86_HT=y
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
+CONFIG_KTIME_SCALAR=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-spitz b/packages/linux/linux-rp-2.6.21/defconfig-spitz
new file mode 100644
index 0000000000..e1c2c10352
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-spitz
@@ -0,0 +1,1741 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21
+# Wed Jun 13 15:37:54 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_HX2750 is not set
+# CONFIG_PXA_SHARPSL_25x is not set
+CONFIG_PXA_SHARPSL_27x=y
+CONFIG_MACH_AKITA=y
+CONFIG_MACH_SPITZ=y
+CONFIG_MACH_BORZOI=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SHARP_Cxx00=y
+CONFIG_PXA_SSP=y
+# CONFIG_PXA_KEYS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rootfstype=ext3 rootdelay=1 rw  fbcon=rotate:1 dyntick=enable quiet"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=m
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_IEEE80211_SOFTMAC is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_SHARPSL=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_CORGI is not set
+CONFIG_KEYBOARD_SPITZ=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_CORGI=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_SPITZ=y
+# CONFIG_LEDS_TOSA is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_LCD_QVGA=y
+# CONFIG_FB_PXA_LCD_VGA is not set
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_OHAND_CLUT224=y
+# CONFIG_LOGO_OZ240_CLUT224 is not set
+# CONFIG_LOGO_OZ480_CLUT224 is not set
+# CONFIG_LOGO_OZ640_CLUT224 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_DETECT is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=m
+
+#
+# SoC Platforms
+#
+
+#
+# SoC Audio for the Atmel AT91
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_I2S=m
+CONFIG_SND_PXA2XX_SOC_SPITZ=m
+CONFIG_SND_SOC_WM8750=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET_MII=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=m
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+CONFIG_USB_CYTHERM=m
+# CONFIG_USB_PHIDGET is not set
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=m
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_LZO=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_SHARPSL_RC=m
diff --git a/packages/linux/linux-rp-2.6.21/defconfig-tosa b/packages/linux/linux-rp-2.6.21/defconfig-tosa
new file mode 100644
index 0000000000..4360f7a179
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/defconfig-tosa
@@ -0,0 +1,1612 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5-git5
+# Tue Mar 14 09:05:26 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_IOSCHED_CFQ=m
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+CONFIG_PXA_SHARPSL=y
+# CONFIG_MACH_HX2750 is not set
+CONFIG_PXA_SHARPSL_25x=y
+# CONFIG_PXA_SHARPSL_27x is not set
+# CONFIG_MACH_POODLE is not set
+# CONFIG_MACH_CORGI is not set
+# CONFIG_MACH_SHEPHERD is not set
+# CONFIG_MACH_HUSKY is not set
+CONFIG_MACH_TOSA=y
+CONFIG_PXA25x=y
+# CONFIG_PXA_KEYS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+CONFIG_KEXEC=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARPSL_PM=y
+CONFIG_SHARP_SCOOP=y
+CONFIG_TOSHIBA_TC6393XB=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+CONFIG_NO_IDLE_HZ=y
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_FREQ_PXA25x=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+# CONFIG_BT_HCIUSB_SCO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_SHARP_SL=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_TMIO=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=640
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_POWER=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_CORGI is not set
+# CONFIG_KEYBOARD_SPITZ is not set
+CONFIG_KEYBOARD_TOSA=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_CORGI is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_WM97XX=y
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_PXA is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multi-Function Devices
+#
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TOSA=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_MAESTRO is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_W100 is not set
+CONFIG_FB_TMIO=y
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_BACKLIGHT_HP680 is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_BUS=y
+CONFIG_SND_DUMMY=m
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+
+#
+# SoC audio support
+#
+CONFIG_SND_SOC=y
+
+#
+# Soc Platforms
+#
+
+#
+# SoC Audio for the Intel PXA2xx
+#
+CONFIG_SND_PXA2xx_SOC=y
+CONFIG_SND_PXA2xx_SOC_AC97=y
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM8753 is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9713 is not set
+# CONFIG_SND_PXA2xx_SOC_MAINSTONE_WM9712 is not set
+# CONFIG_SND_PXA2xx_SOC_CORGI is not set
+# CONFIG_SND_PXA2xx_SOC_SPITZ is not set
+CONFIG_SND_PXA2xx_SOC_TOSA=y
+
+#
+# Soc Codecs
+#
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8772 is not set
+# CONFIG_SND_SOC_WM8971 is not set
+# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_SOC_WM9712=y
+# CONFIG_SND_SOC_UDA1380 is not set
+# CONFIG_SND_SOC_AK4535 is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_SL811_HCD=m
+CONFIG_USB_SL811_CS=m
+
+#
+# USB Device Class drivers
+#
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+CONFIG_USB_KBD=m
+CONFIG_USB_MOUSE=m
+CONFIG_USB_AIPTEK=m
+CONFIG_USB_WACOM=m
+# CONFIG_USB_ACECAD is not set
+CONFIG_USB_KBTAB=m
+CONFIG_USB_POWERMATE=m
+CONFIG_USB_MTOUCH=m
+# CONFIG_USB_ITMTOUCH is not set
+CONFIG_USB_EGALAX=m
+# CONFIG_USB_YEALINK is not set
+CONFIG_USB_XPAD=m
+CONFIG_USB_ATI_REMOTE=m
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+
+#
+# USB Multimedia devices
+#
+CONFIG_USB_DABUSB=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_DSBR=m
+# CONFIG_USB_ET61X251 is not set
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+# CONFIG_USB_PWC is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ANYDATA is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_EZUSB=y
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_LED=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_VMALLOC is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_GENERIC_ALLOCATOR=y
+# CONFIG_SHARPSL_RC is not set
diff --git a/packages/linux/linux-rp-2.6.21/hostap-monitor-mode.patch b/packages/linux/linux-rp-2.6.21/hostap-monitor-mode.patch
new file mode 100644
index 0000000000..641fd19e50
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/hostap-monitor-mode.patch
@@ -0,0 +1,209 @@
+This is a patch that I've been maintaining for a few years, and I'd 
+really like to see it added to the mainstream zaurus kernel so I can 
+finally stop distributing my own.
+
+This patch only effects the card while in monitor mode, and does not 
+cause any known stability issues.
+
+http://patches.aircrack-ng.org/hostap-kernel-2.6.18.patch
+
+Rick Farina (Zero_Chaos)
+
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_80211_tx.c	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_80211_tx.c	2006-09-21 01:30:18.000000000 -0400
+@@ -69,6 +69,9 @@
+ 	iface = netdev_priv(dev);
+ 	local = iface->local;
+ 
++	if (local->iw_mode == IW_MODE_MONITOR)
++		goto xmit;
++
+ 	if (skb->len < ETH_HLEN) {
+ 		printk(KERN_DEBUG "%s: hostap_data_start_xmit: short skb "
+ 		       "(len=%d)\n", dev->name, skb->len);
+@@ -234,6 +237,7 @@
+ 		memcpy(skb_put(skb, ETH_ALEN), &hdr.addr4, ETH_ALEN);
+ 	}
+ 
++xmit:
+ 	iface->stats.tx_packets++;
+ 	iface->stats.tx_bytes += skb->len;
+ 
+@@ -404,8 +408,6 @@
+ 	}
+ 
+ 	if (skb->len < 24) {
+-		printk(KERN_DEBUG "%s: hostap_master_start_xmit: short skb "
+-		       "(len=%d)\n", dev->name, skb->len);
+ 		ret = 0;
+ 		iface->stats.tx_dropped++;
+ 		goto fail;
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.orig
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_cs.c.rej
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_hw.c	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_hw.c	2006-09-21 01:30:18.000000000 -0400
+@@ -1005,6 +1005,35 @@
+ 	return fid;
+ }
+ 
++static int prism2_monitor_enable(struct net_device *dev)
++{
++	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE, 5)) {
++		printk(KERN_DEBUG "Port type setting for monitor mode "
++			"failed\n");
++		return -EOPNOTSUPP;
++	}
++
++	if (hfa384x_cmd(dev, HFA384X_CMDCODE_TEST | (0x0a << 8),
++			     0, NULL, NULL)) {
++		printk(KERN_DEBUG "Could not enter testmode 0x0a\n");
++		return -EOPNOTSUPP;
++	}
++
++	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
++			    HFA384X_WEPFLAGS_PRIVACYINVOKED |
++			    HFA384X_WEPFLAGS_HOSTENCRYPT |
++			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
++		printk(KERN_DEBUG "WEP flags setting failed\n");
++		return -EOPNOTSUPP;
++	}
++
++	if (hostap_set_word(dev, HFA384X_RID_PROMISCUOUSMODE, 1)) {
++		printk(KERN_DEBUG "Could not set promiscuous mode\n");
++		return -EOPNOTSUPP;
++	}
++
++	return 0;
++}
+ 
+ static int prism2_reset_port(struct net_device *dev)
+ {
+@@ -1031,6 +1060,10 @@
+ 			       "port\n", dev->name);
+ 	}
+ 
++	if (local->iw_mode == IW_MODE_MONITOR)
++		/* force mode 0x0a after port 0 reset */
++		return prism2_monitor_enable(dev);
++
+ 	/* It looks like at least some STA firmware versions reset
+ 	 * fragmentation threshold back to 2346 after enable command. Restore
+ 	 * the configured value, if it differs from this default. */
+@@ -1466,6 +1499,10 @@
+ 		return 1;
+ 	}
+ 
++	if (local->iw_mode == IW_MODE_MONITOR)
++		/* force mode 0x0a after port 0 reset */
++		prism2_monitor_enable(dev);
++
+ 	local->hw_ready = 1;
+ 	local->hw_reset_tries = 0;
+ 	local->hw_resetting = 0;
+@@ -3156,6 +3193,7 @@
+ 	local->func->hw_config = prism2_hw_config;
+ 	local->func->hw_reset = prism2_hw_reset;
+ 	local->func->hw_shutdown = prism2_hw_shutdown;
++	local->func->monitor_enable = prism2_monitor_enable;
+ 	local->func->reset_port = prism2_reset_port;
+ 	local->func->schedule_reset = prism2_schedule_reset;
+ #ifdef PRISM2_DOWNLOAD_SUPPORT
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_hw.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_ioctl.c	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_ioctl.c	2006-09-21 01:30:18.000000000 -0400
+@@ -1104,33 +1104,7 @@
+ 
+ 	printk(KERN_DEBUG "Enabling monitor mode\n");
+ 	hostap_monitor_set_type(local);
+-
+-	if (hostap_set_word(dev, HFA384X_RID_CNFPORTTYPE,
+-			    HFA384X_PORTTYPE_PSEUDO_IBSS)) {
+-		printk(KERN_DEBUG "Port type setting for monitor mode "
+-		       "failed\n");
+-		return -EOPNOTSUPP;
+-	}
+-
+-	/* Host decrypt is needed to get the IV and ICV fields;
+-	 * however, monitor mode seems to remove WEP flag from frame
+-	 * control field */
+-	if (hostap_set_word(dev, HFA384X_RID_CNFWEPFLAGS,
+-			    HFA384X_WEPFLAGS_HOSTENCRYPT |
+-			    HFA384X_WEPFLAGS_HOSTDECRYPT)) {
+-		printk(KERN_DEBUG "WEP flags setting failed\n");
+-		return -EOPNOTSUPP;
+-	}
+-
+-	if (local->func->reset_port(dev) ||
+-	    local->func->cmd(dev, HFA384X_CMDCODE_TEST |
+-			     (HFA384X_TEST_MONITOR << 8),
+-			     0, NULL, NULL)) {
+-		printk(KERN_DEBUG "Setting monitor mode failed\n");
+-		return -EOPNOTSUPP;
+-	}
+-
+-	return 0;
++	return local->func->reset_port(dev);
+ }
+ 
+ 
+@@ -1199,7 +1173,7 @@
+ 	local->iw_mode = *mode;
+ 
+ 	if (local->iw_mode == IW_MODE_MONITOR)
+-		hostap_monitor_mode_enable(local);
++		return hostap_monitor_mode_enable(local);
+ 	else if (local->iw_mode == IW_MODE_MASTER && !local->host_encrypt &&
+ 		 !local->fw_encrypt_ok) {
+ 		printk(KERN_DEBUG "%s: defaulting to host-based encryption as "
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_main.c	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_main.c	2006-09-21 01:30:18.000000000 -0400
+@@ -331,7 +331,7 @@
+ 	if (local->iw_mode == IW_MODE_REPEAT)
+ 		return HFA384X_PORTTYPE_WDS;
+ 	if (local->iw_mode == IW_MODE_MONITOR)
+-		return HFA384X_PORTTYPE_PSEUDO_IBSS;
++		return 5; /*HFA384X_PORTTYPE_PSEUDO_IBSS;*/
+ 	return HFA384X_PORTTYPE_HOSTAP;
+ }
+ 
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_main.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_pci.c	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_pci.c	2006-09-21 01:30:18.000000000 -0400
+@@ -48,6 +48,8 @@
+ 	{ 0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID },
+ 	/* Samsung MagicLAN SWL-2210P */
+ 	{ 0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID },
++	/* NETGEAR MA311 */
++	{ 0x1385, 0x3872, PCI_ANY_ID, PCI_ANY_ID },
+ 	{ 0 }
+ };
+ 
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_pci.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_plx.c	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_plx.c	2006-09-21 01:30:18.000000000 -0400
+@@ -101,6 +101,7 @@
+ 	{ 0xc250, 0x0002 } /* EMTAC A2424i */,
+ 	{ 0xd601, 0x0002 } /* Z-Com XI300 */,
+ 	{ 0xd601, 0x0005 } /* Zcomax XI-325H 200mW */,
++	{ 0xd601, 0x0010 } /* Zcomax XI-325H 100mW */,
+ 	{ 0, 0}
+ };
+ 
+Only in linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap: hostap_plx.c.orig
+diff -ur linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h
+--- linux-2.6.18-gentoo/drivers/net/wireless/hostap/hostap_wlan.h	2006-09-21 01:26:27.000000000 -0400
++++ linux-2.6.18-gentoo-rawtx/drivers/net/wireless/hostap/hostap_wlan.h	2006-09-21 01:30:18.000000000 -0400
+@@ -575,6 +575,7 @@
+ 	int (*hw_config)(struct net_device *dev, int initial);
+ 	void (*hw_reset)(struct net_device *dev);
+ 	void (*hw_shutdown)(struct net_device *dev, int no_disable);
++	int (*monitor_enable)(struct net_device *dev);
+ 	int (*reset_port)(struct net_device *dev);
+ 	void (*schedule_reset)(local_info_t *local);
+ 	int (*download)(local_info_t *local,
diff --git a/packages/linux/linux-rp-2.6.21/orinoco-remove-all-which-are-in-hostap-HACK.patch b/packages/linux/linux-rp-2.6.21/orinoco-remove-all-which-are-in-hostap-HACK.patch
new file mode 100644
index 0000000000..380349f809
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/orinoco-remove-all-which-are-in-hostap-HACK.patch
@@ -0,0 +1,88 @@
+This patch should resolve problem when people get eth0 (orinoco_cs) instead of wlan0 (hostap_cs)
+with their WiFi cards.
+
+Patch will NEVER been accepted upstream.
+
+Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
+
+Index: linux/drivers/net/wireless/orinoco_cs.c
+===================================================================
+--- linux.orig/drivers/net/wireless/orinoco_cs.c	2006-08-23 16:04:10.000000000 +0200
++++ linux/drivers/net/wireless/orinoco_cs.c	2006-08-23 16:17:43.000000000 +0200
+@@ -453,33 +453,21 @@
+ 	"Pavel Roskin <proski@gnu.org>, et al)";
+ 
+ static struct pcmcia_device_id orinoco_cs_ids[] = {
+-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
+-	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
+ 	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
+-	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
+-	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
+ 	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
+ 	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
+ 	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
+ 	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
+ 	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
+-	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
+ 	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
+ 	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+ 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
+-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
+-	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
+-	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
+ 	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
+-	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
+ 	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+ 	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
+-	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
+ 	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
+ 	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
+ 	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
+-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
+-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
+ 	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
+ 	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
+ 	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
+@@ -487,31 +475,25 @@
+ 	PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
+ 	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
+ 	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
+-	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
+ 	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
+ 	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
+ 	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
+-	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
+ 	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
+-	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
+ 	PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
+ 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
+ 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
+ 	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
+ 	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
+-	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
+ 	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
+ 	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
+ 	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
+ 	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
+ 	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
+ 	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
+-	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
+ 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
+ 	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
+ 	PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
+ 	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
+-	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
+ 	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
+ 	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
+ 	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
+@@ -529,10 +511,8 @@
+ 	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
+ 	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
+ 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
+-	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
+ 	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
+ 	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
+-	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
+ 	PCMCIA_DEVICE_NULL,
+ };
+ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);
diff --git a/packages/linux/linux-rp-2.6.21/pxa-serial-hack.patch b/packages/linux/linux-rp-2.6.21/pxa-serial-hack.patch
new file mode 100644
index 0000000000..bf20f46a05
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/pxa-serial-hack.patch
@@ -0,0 +1,90 @@
+---
+ drivers/serial/8250.c        |    5 +++++
+ drivers/serial/serial_core.c |    1 +
+ drivers/serial/serial_cs.c   |   12 +++++++++---
+ include/linux/serial_core.h  |    1 +
+ 4 files changed, 16 insertions(+), 3 deletions(-)
+
+Index: linux-2.6.20/drivers/serial/8250.c
+===================================================================
+--- linux-2.6.20.orig/drivers/serial/8250.c	2007-04-27 13:37:26.000000000 +0100
++++ linux-2.6.20/drivers/serial/8250.c	2007-04-27 13:38:16.000000000 +0100
+@@ -2429,7 +2429,12 @@
+ 	.driver_name		= "serial",
+ 	.dev_name		= "ttyS",
+ 	.major			= TTY_MAJOR,
++#ifdef CONFIG_SERIAL_PXA
++	.minor			= 64 + 4,
++	.name_base		= 4,
++#else
+ 	.minor			= 64,
++#endif
+ 	.nr			= UART_NR,
+ 	.cons			= SERIAL8250_CONSOLE,
+ };
+Index: linux-2.6.20/drivers/serial/serial_core.c
+===================================================================
+--- linux-2.6.20.orig/drivers/serial/serial_core.c	2007-02-04 18:44:54.000000000 +0000
++++ linux-2.6.20/drivers/serial/serial_core.c	2007-04-27 13:39:39.000000000 +0100
+@@ -2068,7 +2068,8 @@
+ 	printk(KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n",
+ 	       port->dev ? port->dev->bus_id : "",
+ 	       port->dev ? ": " : "",
+-	       drv->dev_name, port->line, address, port->irq, uart_type(port));
++	       drv->dev_name, port->line + drv->name_base, address, port->irq,
++	       uart_type(port));
+ }
+ 
+ static void
+@@ -2183,6 +2184,7 @@
+ 	normal->owner		= drv->owner;
+ 	normal->driver_name	= drv->driver_name;
+ 	normal->name		= drv->dev_name;
++	normal->name_base	= drv->name_base;
+ 	normal->major		= drv->major;
+ 	normal->minor_start	= drv->minor;
+ 	normal->type		= TTY_DRIVER_TYPE_SERIAL;
+Index: linux-2.6.20/include/linux/serial_core.h
+===================================================================
+--- linux-2.6.20.orig/include/linux/serial_core.h	2007-02-04 18:44:54.000000000 +0000
++++ linux-2.6.20/include/linux/serial_core.h	2007-04-27 13:37:27.000000000 +0100
+@@ -341,6 +341,7 @@
+ 	struct module		*owner;
+ 	const char		*driver_name;
+ 	const char		*dev_name;
++	int			 name_base;
+ 	int			 major;
+ 	int			 minor;
+ 	int			 nr;
+Index: linux-2.6.20/drivers/serial/serial_cs.c
+===================================================================
+--- linux-2.6.20.orig/drivers/serial/serial_cs.c	2007-02-04 18:44:54.000000000 +0000
++++ linux-2.6.20/drivers/serial/serial_cs.c	2007-04-27 13:40:34.000000000 +0100
+@@ -390,7 +390,7 @@
+ 			kio_addr_t iobase, int irq)
+ {
+ 	struct uart_port port;
+-	int line;
++	int line, linestart;
+ 
+ 	memset(&port, 0, sizeof (struct uart_port));
+ 	port.iobase = iobase;
+@@ -411,10 +411,16 @@
+ 		return -EINVAL;
+ 	}
+ 
++#if CONFIG_SERIAL_PXA
++	linestart = 4;
++#else
++	linestart = 0;
++#endif
++
+ 	info->line[info->ndev] = line;
+-	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
++	sprintf(info->node[info->ndev].dev_name, "ttyS%d", line+linestart);
+ 	info->node[info->ndev].major = TTY_MAJOR;
+-	info->node[info->ndev].minor = 0x40 + line;
++	info->node[info->ndev].minor = 0x40 + line + linestart;
+ 	if (info->ndev > 0)
+ 		info->node[info->ndev - 1].next = &info->node[info->ndev];
+ 	info->ndev++;
diff --git a/packages/linux/linux-rp-2.6.21/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch b/packages/linux/linux-rp-2.6.21/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
new file mode 100644
index 0000000000..18bf4268fc
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/serial-add-support-for-non-standard-xtals-to-16c950-driver.patch
@@ -0,0 +1,155 @@
+
+From: Petr Vandrovec <vandrove@vc.cvut.cz>
+
+Patch below adds support for using different prescaler than 16 for 16c950
+chips.  This is needed for using Fujitsu-Siemens Connect2Air compact-flash
+card, which comes (apparently) with 806kHz clocks, and so you have to
+program prescaler for division by 7, and DLAB to 1, to get 115200Bd.  
+
+To get card properly running you also have to add lines below to
+/etc/pcmcia/serial.opts so kernel knows that base speed is not 115200 but
+50400 (50400 * 16 = 806400; 806400 / 7 = 115200).  As I've found no code
+specifying baud_rate in serial_cs, I assume that specifying it in
+serial.opts is right way to do this type of things.
+
+Patch also fixes problem that for UPF_MAGIC_MULTIPLIER maximum possible
+baud rate passed to uart code was uartclk / 16 while correct value for
+these devices (and for 16c950) is uartclk / 4.
+
+Patch also fixes problem that for UPF_MAGIC_MULTIPLIER devices with
+baud_rate 19200 or 9600 spd_cust did not work correctly.  Not that such
+devices exist, but we should not ignore spd_cust, user probably knows why
+he asked for spd_cust.
+
+serial.opts:
+
+case "$MANFID-$FUNCID-$PRODID_1-$PRODID_2-$PRODID_3-$PRODID_4" in
+'0279,950b-2-GPRS Modem---')
+    SERIAL_OPTS="baud_base 50400"
+    ;;
+esac
+
+Cc: David Woodhouse <dwmw2@infradead.org>
+Signed-off-by: Andrew Morton <akpm@osdl.org>
+---
+
+ drivers/serial/8250.c |   82 +++++++++++++++++++++++++++++++++++++++-----------
+ 1 files changed, 64 insertions(+), 18 deletions(-)
+
+diff -puN drivers/serial/8250.c~serial-add-support-for-non-standard-xtals-to-16c950-driver drivers/serial/8250.c
+--- devel/drivers/serial/8250.c~serial-add-support-for-non-standard-xtals-to-16c950-driver	2005-09-12 03:34:57.000000000 -0700
++++ devel-akpm/drivers/serial/8250.c	2005-09-12 03:34:57.000000000 -0700
+@@ -1653,24 +1653,58 @@ static void serial8250_shutdown(struct u
+ 		serial_unlink_irq_chain(up);
+ }
+ 
+-static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
++static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud,
++					   unsigned int *prescaler)
+ {
+-	unsigned int quot;
+-
+-	/*
+-	 * Handle magic divisors for baud rates above baud_base on
+-	 * SMSC SuperIO chips.
++        /*
++	 * Use special handling only if user did not supply its own divider.
++	 * spd_cust is defined in terms of baud_base, so always use default
++	 * prescaler when spd_cust is requested.
+ 	 */
+-	if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+-	    baud == (port->uartclk/4))
+-		quot = 0x8001;
+-	else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+-		 baud == (port->uartclk/8))
+-		quot = 0x8002;
+-	else
+-		quot = uart_get_divisor(port, baud);
+ 
+-	return quot;
++	*prescaler = 16;
++        if (baud != 38400 || (port->flags & UPF_SPD_MASK) != UPF_SPD_CUST) {
++		unsigned int quot = port->uartclk / baud;
++
++		/*
++		 * Handle magic divisors for baud rates above baud_base on
++		 * SMSC SuperIO chips.
++		 */
++		if (port->flags & UPF_MAGIC_MULTIPLIER) {
++			if (quot == 4) {
++				return 0x8001;
++			} else if (quot == 8) {
++				return 0x8002;
++			}
++		}
++		if (port->type == PORT_16C950) {
++			/*
++			 * This computes TCR value (4 to 16), not CPR value (which can
++			 * be between 1.000 and 31.875) - chip I have uses XTAL of
++			 * 806400Hz, and so a division by 7 is required to get 115200Bd.
++			 * I'm leaving CPR disabled for now, until someone will
++			 * hit even more exotic XTAL (it is needed to get 500kbps
++			 * or 1000kbps from 18.432MHz XTAL, but I have no device
++			 * which would benefit from doing that).
++			 *
++			 * If we can use divide by 16, use it.  Otherwise look for
++			 * better prescaler, from 15 to 4.  If quotient cannot
++			 * be divided by any integer value between 4 and 15, use 4.
++			 */
++			if (quot & 0x0F) {
++				unsigned int div;
++
++				for (div = 15; div > 4; div--) {
++					if (quot % div == 0) {
++						break;
++					}
++				}
++				*prescaler = div;
++				return quot / div;
++			}
++		}
++	}
++	return uart_get_divisor(port, baud);
+ }
+ 
+ static void
+@@ -1680,7 +1714,7 @@ serial8250_set_termios(struct uart_port 
+ 	struct uart_8250_port *up = (struct uart_8250_port *)port;
+ 	unsigned char cval, fcr = 0;
+ 	unsigned long flags;
+-	unsigned int baud, quot;
++	unsigned int baud, quot, prescaler;
+ 
+ 	switch (termios->c_cflag & CSIZE) {
+ 	case CS5:
+@@ -1712,8 +1746,13 @@ serial8250_set_termios(struct uart_port 
+ 	/*
+ 	 * Ask the core to calculate the divisor for us.
+ 	 */
+-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 
+-	quot = serial8250_get_divisor(port, baud);
++
++	if (port->type == PORT_16C950 || (port->flags & UPF_MAGIC_MULTIPLIER)) {
++		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
++	} else {
++		baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
++	}
++	quot = serial8250_get_divisor(port, baud, &prescaler);
+ 
+ 	/*
+ 	 * Oxford Semi 952 rev B workaround
+@@ -1817,6 +1856,13 @@ serial8250_set_termios(struct uart_port 
+ 	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
+ 
+ 	/*
++	 * Program prescaler for 16C950 chips.
++	 */
++	if (up->port.type == PORT_16C950) {
++		serial_icr_write(up, UART_TCR, prescaler == 16 ? 0 : prescaler);
++	}
++
++	/*
+ 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ 	 * is written without DLAB set, this mode will be disabled.
+ 	 */
+_
diff --git a/packages/linux/linux-rp-2.6.21/squashfs3.0-2.6.15.patch b/packages/linux/linux-rp-2.6.21/squashfs3.0-2.6.15.patch
new file mode 100644
index 0000000000..405d4ec124
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/squashfs3.0-2.6.15.patch
@@ -0,0 +1,4191 @@
+ fs/Kconfig                     |   65 +
+ fs/Makefile                    |    1 
+ fs/squashfs/Makefile           |    7 
+ fs/squashfs/inode.c            | 2124 +++++++++++++++++++++++++++++++++++++++++
+ fs/squashfs/squashfs.h         |   86 +
+ fs/squashfs/squashfs2_0.c      |  757 ++++++++++++++
+ include/linux/squashfs_fs.h    |  911 +++++++++++++++++
+ include/linux/squashfs_fs_i.h  |   45 
+ include/linux/squashfs_fs_sb.h |   74 +
+ init/do_mounts_rd.c            |   13 
+ 10 files changed, 4083 insertions(+)
+
+Index: git/fs/Kconfig
+===================================================================
+--- git.orig/fs/Kconfig	2006-10-31 16:09:22.000000000 +0000
++++ git/fs/Kconfig	2006-10-31 21:26:45.000000000 +0000
+@@ -1407,6 +1407,71 @@ config CRAMFS
+ 
+ 	  If unsure, say N.
+ 
++config SQUASHFS
++	tristate "SquashFS 3.0 - Squashed file system support"
++	select ZLIB_INFLATE
++	help
++	  Saying Y here includes support for SquashFS 3.0 (a Compressed Read-Only File
++	  System).  Squashfs is a highly compressed read-only filesystem for Linux.
++	  It uses zlib compression to compress both files, inodes and directories.
++	  Inodes in the system are very small and all blocks are packed to minimise
++	  data overhead. Block sizes greater than 4K are supported up to a maximum of 64K.
++	  SquashFS 3.0 supports 64 bit filesystems and files (larger than 4GB), full
++	  uid/gid information, hard links and timestamps.
++
++	  Squashfs is intended for general read-only filesystem use, for archival
++	  use (i.e. in cases where a .tar.gz file may be used), and in embedded
++	  systems where low overhead is needed.  Further information and filesystem tools
++	  are available from http://squashfs.sourceforge.net.
++
++	  If you want to compile this as a module ( = code which can be
++	  inserted in and removed from the running kernel whenever you want),
++	  say M here and read <file:Documentation/modules.txt>.  The module
++	  will be called squashfs.  Note that the root file system (the one
++	  containing the directory /) cannot be compiled as a module.
++
++	  If unsure, say N.
++
++config SQUASHFS_EMBEDDED
++
++	bool "Additional options for memory-constrained systems" 
++	depends on SQUASHFS
++	default n
++	help
++	  Saying Y here allows you to specify cache sizes and how Squashfs
++	  allocates memory.  This is only intended for memory constrained
++	  systems.
++
++	  If unsure, say N.
++
++config SQUASHFS_FRAGMENT_CACHE_SIZE
++	int "Number of fragments cached" if SQUASHFS_EMBEDDED
++	depends on SQUASHFS
++	default "3"
++	help
++	  By default SquashFS caches the last 3 fragments read from
++	  the filesystem.  Increasing this amount may mean SquashFS
++	  has to re-read fragments less often from disk, at the expense
++	  of extra system memory.  Decreasing this amount will mean
++	  SquashFS uses less memory at the expense of extra reads from disk.
++
++	  Note there must be at least one cached fragment.  Anything
++	  much more than three will probably not make much difference.
++
++config SQUASHFS_VMALLOC
++	bool "Use Vmalloc rather than Kmalloc" if SQUASHFS_EMBEDDED
++	depends on SQUASHFS
++	default n
++	help
++	  By default SquashFS uses kmalloc to obtain fragment cache memory.
++	  Kmalloc memory is the standard kernel allocator, but it can fail
++	  on memory constrained systems.  Because of the way Vmalloc works,
++	  Vmalloc can succeed when kmalloc fails.  Specifying this option
++	  will make SquashFS always use Vmalloc to allocate the
++	  fragment cache memory.
++
++	  If unsure, say N.
++
+ config VXFS_FS
+ 	tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)"
+ 	depends on BLOCK
+Index: git/fs/Makefile
+===================================================================
+--- git.orig/fs/Makefile	2006-10-31 16:09:22.000000000 +0000
++++ git/fs/Makefile	2006-10-31 21:26:45.000000000 +0000
+@@ -67,6 +67,7 @@ obj-$(CONFIG_JBD)		+= jbd/
+ obj-$(CONFIG_JBD2)		+= jbd2/
+ obj-$(CONFIG_EXT2_FS)		+= ext2/
+ obj-$(CONFIG_CRAMFS)		+= cramfs/
++obj-$(CONFIG_SQUASHFS)		+= squashfs/
+ obj-$(CONFIG_RAMFS)		+= ramfs/
+ obj-$(CONFIG_HUGETLBFS)		+= hugetlbfs/
+ obj-$(CONFIG_CODA_FS)		+= coda/
+Index: git/fs/squashfs/inode.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/fs/squashfs/inode.c	2006-11-01 18:01:32.000000000 +0000
+@@ -0,0 +1,2124 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * inode.c
++ */
++
++#include <linux/types.h>
++#include <linux/squashfs_fs.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/fs.h>
++#include <linux/smp_lock.h>
++#include <linux/slab.h>
++#include <linux/squashfs_fs_sb.h>
++#include <linux/squashfs_fs_i.h>
++#include <linux/buffer_head.h>
++#include <linux/vfs.h>
++#include <linux/init.h>
++#include <linux/dcache.h>
++#include <linux/wait.h>
++#include <linux/zlib.h>
++#include <linux/blkdev.h>
++#include <linux/vmalloc.h>
++#include <asm/uaccess.h>
++#include <asm/semaphore.h>
++
++#include "squashfs.h"
++
++static void squashfs_put_super(struct super_block *);
++static int squashfs_statfs(struct dentry *, struct kstatfs *);
++static int squashfs_symlink_readpage(struct file *file, struct page *page);
++static int squashfs_readpage(struct file *file, struct page *page);
++static int squashfs_readpage4K(struct file *file, struct page *page);
++static int squashfs_readdir(struct file *, void *, filldir_t);
++static struct inode *squashfs_alloc_inode(struct super_block *sb);
++static void squashfs_destroy_inode(struct inode *inode);
++static int init_inodecache(void);
++static void destroy_inodecache(void);
++static struct dentry *squashfs_lookup(struct inode *, struct dentry *,
++				struct nameidata *);
++static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode);
++static long long read_blocklist(struct inode *inode, int index,
++				int readahead_blks, char *block_list,
++				unsigned short **block_p, unsigned int *bsize);
++static int squashfs_get_sb(struct file_system_type *, int,
++				const char *, void *, struct vfsmount *);
++
++
++static z_stream stream;
++
++static struct file_system_type squashfs_fs_type = {
++	.owner = THIS_MODULE,
++	.name = "squashfs",
++	.get_sb = squashfs_get_sb,
++	.kill_sb = kill_block_super,
++	.fs_flags = FS_REQUIRES_DEV
++};
++
++static unsigned char squashfs_filetype_table[] = {
++	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
++};
++
++static struct super_operations squashfs_ops = {
++	.alloc_inode = squashfs_alloc_inode,
++	.destroy_inode = squashfs_destroy_inode,
++	.statfs = squashfs_statfs,
++	.put_super = squashfs_put_super,
++};
++
++SQSH_EXTERN struct address_space_operations squashfs_symlink_aops = {
++	.readpage = squashfs_symlink_readpage
++};
++
++SQSH_EXTERN struct address_space_operations squashfs_aops = {
++	.readpage = squashfs_readpage
++};
++
++SQSH_EXTERN struct address_space_operations squashfs_aops_4K = {
++	.readpage = squashfs_readpage4K
++};
++
++static struct file_operations squashfs_dir_ops = {
++	.read = generic_read_dir,
++	.readdir = squashfs_readdir
++};
++
++SQSH_EXTERN struct inode_operations squashfs_dir_inode_ops = {
++	.lookup = squashfs_lookup
++};
++
++
++static struct buffer_head *get_block_length(struct super_block *s,
++				int *cur_index, int *offset, int *c_byte)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	unsigned short temp;
++	struct buffer_head *bh;
++
++	if (!(bh = sb_bread(s, *cur_index)))
++		goto out;
++
++	if (msblk->devblksize - *offset == 1) {
++		if (msblk->swap)
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				(bh->b_data + *offset));
++		else
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				(bh->b_data + *offset));
++		brelse(bh);
++		if (!(bh = sb_bread(s, ++(*cur_index))))
++			goto out;
++		if (msblk->swap)
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				bh->b_data); 
++		else
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				bh->b_data); 
++		*c_byte = temp;
++		*offset = 1;
++	} else {
++		if (msblk->swap) {
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				(bh->b_data + *offset));
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				(bh->b_data + *offset + 1)); 
++		} else {
++			((unsigned char *) &temp)[0] = *((unsigned char *)
++				(bh->b_data + *offset));
++			((unsigned char *) &temp)[1] = *((unsigned char *)
++				(bh->b_data + *offset + 1)); 
++		}
++		*c_byte = temp;
++		*offset += 2;
++	}
++
++	if (SQUASHFS_CHECK_DATA(msblk->sblk.flags)) {
++		if (*offset == msblk->devblksize) {
++			brelse(bh);
++			if (!(bh = sb_bread(s, ++(*cur_index))))
++				goto out;
++			*offset = 0;
++		}
++		if (*((unsigned char *) (bh->b_data + *offset)) !=
++						SQUASHFS_MARKER_BYTE) {
++			ERROR("Metadata block marker corrupt @ %x\n",
++						*cur_index);
++			brelse(bh);
++			goto out;
++		}
++		(*offset)++;
++	}
++	return bh;
++
++out:
++	return NULL;
++}
++
++
++SQSH_EXTERN unsigned int squashfs_read_data(struct super_block *s, char *buffer,
++			long long index, unsigned int length,
++			long long *next_index)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct buffer_head *bh[((SQUASHFS_FILE_MAX_SIZE - 1) >>
++			msblk->devblksize_log2) + 2];
++	unsigned int offset = index & ((1 << msblk->devblksize_log2) - 1);
++	unsigned int cur_index = index >> msblk->devblksize_log2;
++	int bytes, avail_bytes, b = 0, k;
++	char *c_buffer;
++	unsigned int compressed;
++	unsigned int c_byte = length;
++
++	if (c_byte) {
++		bytes = msblk->devblksize - offset;
++		compressed = SQUASHFS_COMPRESSED_BLOCK(c_byte);
++		c_buffer = compressed ? msblk->read_data : buffer;
++		c_byte = SQUASHFS_COMPRESSED_SIZE_BLOCK(c_byte);
++
++		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
++					? "" : "un", (unsigned int) c_byte);
++
++		if (!(bh[0] = sb_getblk(s, cur_index)))
++			goto block_release;
++
++		for (b = 1; bytes < c_byte; b++) {
++			if (!(bh[b] = sb_getblk(s, ++cur_index)))
++				goto block_release;
++			bytes += msblk->devblksize;
++		}
++		ll_rw_block(READ, b, bh);
++	} else {
++		if (!(bh[0] = get_block_length(s, &cur_index, &offset,
++								&c_byte)))
++			goto read_failure;
++
++		bytes = msblk->devblksize - offset;
++		compressed = SQUASHFS_COMPRESSED(c_byte);
++		c_buffer = compressed ? msblk->read_data : buffer;
++		c_byte = SQUASHFS_COMPRESSED_SIZE(c_byte);
++
++		TRACE("Block @ 0x%llx, %scompressed size %d\n", index, compressed
++					? "" : "un", (unsigned int) c_byte);
++
++		for (b = 1; bytes < c_byte; b++) {
++			if (!(bh[b] = sb_getblk(s, ++cur_index)))
++				goto block_release;
++			bytes += msblk->devblksize;
++		}
++		ll_rw_block(READ, b - 1, bh + 1);
++	}
++
++	if (compressed)
++		down(&msblk->read_data_mutex);
++
++	for (bytes = 0, k = 0; k < b; k++) {
++		avail_bytes = (c_byte - bytes) > (msblk->devblksize - offset) ?
++					msblk->devblksize - offset :
++					c_byte - bytes;
++		wait_on_buffer(bh[k]);
++		if (!buffer_uptodate(bh[k]))
++			goto block_release;
++		memcpy(c_buffer + bytes, bh[k]->b_data + offset, avail_bytes);
++		bytes += avail_bytes;
++		offset = 0;
++		brelse(bh[k]);
++	}
++
++	/*
++	 * uncompress block
++	 */
++	if (compressed) {
++		int zlib_err;
++
++		stream.next_in = c_buffer;
++		stream.avail_in = c_byte;
++		stream.next_out = buffer;
++		stream.avail_out = msblk->read_size;
++
++		if (((zlib_err = zlib_inflateInit(&stream)) != Z_OK) ||
++				((zlib_err = zlib_inflate(&stream, Z_FINISH))
++				 != Z_STREAM_END) || ((zlib_err =
++				zlib_inflateEnd(&stream)) != Z_OK)) {
++			ERROR("zlib_fs returned unexpected result 0x%x\n",
++				zlib_err);
++			bytes = 0;
++		} else
++			bytes = stream.total_out;
++		
++		up(&msblk->read_data_mutex);
++	}
++
++	if (next_index)
++		*next_index = index + c_byte + (length ? 0 :
++				(SQUASHFS_CHECK_DATA(msblk->sblk.flags)
++				 ? 3 : 2));
++	return bytes;
++
++block_release:
++	while (--b >= 0)
++		brelse(bh[b]);
++
++read_failure:
++	ERROR("sb_bread failed reading block 0x%x\n", cur_index);
++	return 0;
++}
++
++
++SQSH_EXTERN int squashfs_get_cached_block(struct super_block *s, char *buffer,
++				long long block, unsigned int offset,
++				int length, long long *next_block,
++				unsigned int *next_offset)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	int n, i, bytes, return_length = length;
++	long long next_index;
++
++	TRACE("Entered squashfs_get_cached_block [%llx:%x]\n", block, offset);
++
++	while ( 1 ) {
++		for (i = 0; i < SQUASHFS_CACHED_BLKS; i++) 
++			if (msblk->block_cache[i].block == block)
++				break; 
++		
++		down(&msblk->block_cache_mutex);
++
++		if (i == SQUASHFS_CACHED_BLKS) {
++			/* read inode header block */
++			for (i = msblk->next_cache, n = SQUASHFS_CACHED_BLKS;
++					n ; n --, i = (i + 1) %
++					SQUASHFS_CACHED_BLKS)
++				if (msblk->block_cache[i].block !=
++							SQUASHFS_USED_BLK)
++					break;
++
++			if (n == 0) {
++				wait_queue_t wait;
++
++				init_waitqueue_entry(&wait, current);
++				add_wait_queue(&msblk->waitq, &wait);
++				set_current_state(TASK_UNINTERRUPTIBLE);
++ 				up(&msblk->block_cache_mutex);
++				schedule();
++				set_current_state(TASK_RUNNING);
++				remove_wait_queue(&msblk->waitq, &wait);
++				continue;
++			}
++			msblk->next_cache = (i + 1) % SQUASHFS_CACHED_BLKS;
++
++			if (msblk->block_cache[i].block ==
++							SQUASHFS_INVALID_BLK) {
++				if (!(msblk->block_cache[i].data =
++						kmalloc(SQUASHFS_METADATA_SIZE,
++						GFP_KERNEL))) {
++					ERROR("Failed to allocate cache"
++							"block\n");
++					up(&msblk->block_cache_mutex);
++					goto out;
++				}
++			}
++	
++			msblk->block_cache[i].block = SQUASHFS_USED_BLK;
++			up(&msblk->block_cache_mutex);
++
++			if (!(msblk->block_cache[i].length =
++						squashfs_read_data(s,
++						msblk->block_cache[i].data,
++						block, 0, &next_index))) {
++				ERROR("Unable to read cache block [%llx:%x]\n",
++						block, offset);
++				goto out;
++			}
++
++			down(&msblk->block_cache_mutex);
++			wake_up(&msblk->waitq);
++			msblk->block_cache[i].block = block;
++			msblk->block_cache[i].next_index = next_index;
++			TRACE("Read cache block [%llx:%x]\n", block, offset);
++		}
++
++		if (msblk->block_cache[i].block != block) {
++			up(&msblk->block_cache_mutex);
++			continue;
++		}
++
++		if ((bytes = msblk->block_cache[i].length - offset) >= length) {
++			if (buffer)
++				memcpy(buffer, msblk->block_cache[i].data +
++						offset, length);
++			if (msblk->block_cache[i].length - offset == length) {
++				*next_block = msblk->block_cache[i].next_index;
++				*next_offset = 0;
++			} else {
++				*next_block = block;
++				*next_offset = offset + length;
++			}
++			up(&msblk->block_cache_mutex);
++			goto finish;
++		} else {
++			if (buffer) {
++				memcpy(buffer, msblk->block_cache[i].data +
++						offset, bytes);
++				buffer += bytes;
++			}
++			block = msblk->block_cache[i].next_index;
++			up(&msblk->block_cache_mutex);
++			length -= bytes;
++			offset = 0;
++		}
++	}
++
++finish:
++	return return_length;
++out:
++	return 0;
++}
++
++
++static int get_fragment_location(struct super_block *s, unsigned int fragment,
++				long long *fragment_start_block,
++				unsigned int *fragment_size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	long long start_block =
++		msblk->fragment_index[SQUASHFS_FRAGMENT_INDEX(fragment)];
++	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET(fragment);
++	struct squashfs_fragment_entry fragment_entry;
++
++	if (msblk->swap) {
++		struct squashfs_fragment_entry sfragment_entry;
++
++		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
++					start_block, offset,
++					sizeof(sfragment_entry), &start_block,
++					&offset))
++			goto out;
++		SQUASHFS_SWAP_FRAGMENT_ENTRY(&fragment_entry, &sfragment_entry);
++	} else
++		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
++					start_block, offset,
++					sizeof(fragment_entry), &start_block,
++					&offset))
++			goto out;
++
++	*fragment_start_block = fragment_entry.start_block;
++	*fragment_size = fragment_entry.size;
++
++	return 1;
++
++out:
++	return 0;
++}
++
++
++SQSH_EXTERN void release_cached_fragment(struct squashfs_sb_info *msblk, struct
++					squashfs_fragment_cache *fragment)
++{
++	down(&msblk->fragment_mutex);
++	fragment->locked --;
++	wake_up(&msblk->fragment_wait_queue);
++	up(&msblk->fragment_mutex);
++}
++
++
++SQSH_EXTERN struct squashfs_fragment_cache *get_cached_fragment(struct super_block
++					*s, long long start_block,
++					int length)
++{
++	int i, n, nf;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++
++	while ( 1 ) {
++		down(&msblk->fragment_mutex);
++
++		for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS &&
++				msblk->fragment[i].block != start_block; i++);
++
++		if (i == SQUASHFS_CACHED_FRAGMENTS) {
++			nf = (msblk->next_fragment + 1) % 
++				SQUASHFS_CACHED_FRAGMENTS;
++			for (i = msblk->next_fragment, n =
++				SQUASHFS_CACHED_FRAGMENTS; n &&
++				msblk->fragment[i].locked; n--, i = (i + 1) %
++				SQUASHFS_CACHED_FRAGMENTS);
++
++			if (n == 0) {
++				wait_queue_t wait;
++
++				init_waitqueue_entry(&wait, current);
++				add_wait_queue(&msblk->fragment_wait_queue,
++									&wait);
++				set_current_state(TASK_UNINTERRUPTIBLE);
++				up(&msblk->fragment_mutex);
++				schedule();
++				set_current_state(TASK_RUNNING);
++				remove_wait_queue(&msblk->fragment_wait_queue,
++									&wait);
++				continue;
++			}
++			msblk->next_fragment = nf;
++			
++			if (msblk->fragment[i].data == NULL)
++				if (!(msblk->fragment[i].data = SQUASHFS_ALLOC
++						(SQUASHFS_FILE_MAX_SIZE))) {
++					ERROR("Failed to allocate fragment "
++							"cache block\n");
++					up(&msblk->fragment_mutex);
++					goto out;
++				}
++
++			msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
++			msblk->fragment[i].locked = 1;
++			up(&msblk->fragment_mutex);
++
++			if (!(msblk->fragment[i].length = squashfs_read_data(s,
++						msblk->fragment[i].data,
++						start_block, length, NULL))) {
++				ERROR("Unable to read fragment cache block "
++							"[%llx]\n", start_block);
++				msblk->fragment[i].locked = 0;
++				goto out;
++			}
++
++			msblk->fragment[i].block = start_block;
++			TRACE("New fragment %d, start block %lld, locked %d\n",
++						i, msblk->fragment[i].block,
++						msblk->fragment[i].locked);
++			break;
++		}
++
++		msblk->fragment[i].locked++;
++		up(&msblk->fragment_mutex);
++		TRACE("Got fragment %d, start block %lld, locked %d\n", i,
++						msblk->fragment[i].block,
++						msblk->fragment[i].locked);
++		break;
++	}
++
++	return &msblk->fragment[i];
++
++out:
++	return NULL;
++}
++
++
++static struct inode *squashfs_new_inode(struct super_block *s,
++		struct squashfs_base_inode_header *inodeb)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct inode *i = new_inode(s);
++
++	if (i) {
++		i->i_ino = inodeb->inode_number;
++		i->i_mtime.tv_sec = inodeb->mtime;
++		i->i_atime.tv_sec = inodeb->mtime;
++		i->i_ctime.tv_sec = inodeb->mtime;
++		i->i_uid = msblk->uid[inodeb->uid];
++		i->i_mode = inodeb->mode;
++		i->i_size = 0;
++		if (inodeb->guid == SQUASHFS_GUIDS)
++			i->i_gid = i->i_uid;
++		else
++			i->i_gid = msblk->guid[inodeb->guid];
++	}
++
++	return i;
++}
++
++
++static struct inode *squashfs_iget(struct super_block *s, squashfs_inode_t inode)
++{
++	struct inode *i;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long block = SQUASHFS_INODE_BLK(inode) +
++		sblk->inode_table_start;
++	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
++	long long next_block;
++	unsigned int next_offset;
++	union squashfs_inode_header id, sid;
++	struct squashfs_base_inode_header *inodeb = &id.base,
++					  *sinodeb = &sid.base;
++
++	TRACE("Entered squashfs_iget\n");
++
++	if (msblk->swap) {
++		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
++					offset, sizeof(*sinodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++		SQUASHFS_SWAP_BASE_INODE_HEADER(inodeb, sinodeb,
++					sizeof(*sinodeb));
++	} else
++		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
++					offset, sizeof(*inodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++
++	switch(inodeb->inode_type) {
++		case SQUASHFS_FILE_TYPE: {
++			unsigned int frag_size;
++			long long frag_blk;
++			struct squashfs_reg_inode_header *inodep = &id.reg;
++			struct squashfs_reg_inode_header *sinodep = &sid.reg;
++				
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_REG_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			frag_blk = SQUASHFS_INVALID_BLK;
++			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
++					!get_fragment_location(s,
++					inodep->fragment, &frag_blk, &frag_size))
++				goto failed_read;
++				
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = 1;
++			i->i_size = inodep->file_size;
++			i->i_fop = &generic_ro_fops;
++			i->i_mode |= S_IFREG;
++			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
++			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
++			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
++			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++			if (sblk->block_size > 4096)
++				i->i_data.a_ops = &squashfs_aops;
++			else
++				i->i_data.a_ops = &squashfs_aops_4K;
++
++			TRACE("File inode %x:%x, start_block %llx, "
++					"block_list_start %llx, offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, next_block,
++					next_offset);
++			break;
++		}
++		case SQUASHFS_LREG_TYPE: {
++			unsigned int frag_size;
++			long long frag_blk;
++			struct squashfs_lreg_inode_header *inodep = &id.lreg;
++			struct squashfs_lreg_inode_header *sinodep = &sid.lreg;
++				
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_LREG_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			frag_blk = SQUASHFS_INVALID_BLK;
++			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
++					!get_fragment_location(s,
++					inodep->fragment, &frag_blk, &frag_size))
++				goto failed_read;
++				
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->file_size;
++			i->i_fop = &generic_ro_fops;
++			i->i_mode |= S_IFREG;
++			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
++			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
++			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
++			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++			if (sblk->block_size > 4096)
++				i->i_data.a_ops = &squashfs_aops;
++			else
++				i->i_data.a_ops = &squashfs_aops_4K;
++
++			TRACE("File inode %x:%x, start_block %llx, "
++					"block_list_start %llx, offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, next_block,
++					next_offset);
++			break;
++		}
++		case SQUASHFS_DIR_TYPE: {
++			struct squashfs_dir_inode_header *inodep = &id.dir;
++			struct squashfs_dir_inode_header *sinodep = &sid.dir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DIR_INODE_HEADER(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops;
++			i->i_fop = &squashfs_dir_ops;
++			i->i_mode |= S_IFDIR;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
++			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
++
++			TRACE("Directory inode %x:%x, start_block %x, offset "
++					"%x\n", SQUASHFS_INODE_BLK(inode),
++					offset, inodep->start_block,
++					inodep->offset);
++			break;
++		}
++		case SQUASHFS_LDIR_TYPE: {
++			struct squashfs_ldir_inode_header *inodep = &id.ldir;
++			struct squashfs_ldir_inode_header *sinodep = &sid.ldir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_LDIR_INODE_HEADER(inodep,
++						sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops;
++			i->i_fop = &squashfs_dir_ops;
++			i->i_mode |= S_IFDIR;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
++			SQUASHFS_I(i)->u.s2.directory_index_offset =
++								next_offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count =
++								inodep->i_count;
++			SQUASHFS_I(i)->u.s2.parent_inode = inodep->parent_inode;
++
++			TRACE("Long directory inode %x:%x, start_block %x, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, inodep->offset);
++			break;
++		}
++		case SQUASHFS_SYMLINK_TYPE: {
++			struct squashfs_symlink_inode_header *inodep =
++								&id.symlink;
++			struct squashfs_symlink_inode_header *sinodep =
++								&sid.symlink;
++	
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_SYMLINK_INODE_HEADER(inodep,
++								sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_size = inodep->symlink_size;
++			i->i_op = &page_symlink_inode_operations;
++			i->i_data.a_ops = &squashfs_symlink_aops;
++			i->i_mode |= S_IFLNK;
++			SQUASHFS_I(i)->start_block = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++
++			TRACE("Symbolic link inode %x:%x, start_block %llx, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					next_block, next_offset);
++			break;
++		 }
++		 case SQUASHFS_BLKDEV_TYPE:
++		 case SQUASHFS_CHRDEV_TYPE: {
++			struct squashfs_dev_inode_header *inodep = &id.dev;
++			struct squashfs_dev_inode_header *sinodep = &sid.dev;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DEV_INODE_HEADER(inodep, sinodep);
++			} else	
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_mode |= (inodeb->inode_type ==
++					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
++					S_IFBLK;
++			init_special_inode(i, i->i_mode,
++					old_decode_dev(inodep->rdev));
++
++			TRACE("Device inode %x:%x, rdev %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->rdev);
++			break;
++		 }
++		 case SQUASHFS_FIFO_TYPE:
++		 case SQUASHFS_SOCKET_TYPE: {
++			struct squashfs_ipc_inode_header *inodep = &id.ipc;
++			struct squashfs_ipc_inode_header *sinodep = &sid.ipc;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_IPC_INODE_HEADER(inodep, sinodep);
++			} else	
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if ((i = squashfs_new_inode(s, inodeb)) == NULL)
++				goto failed_read1;
++
++			i->i_nlink = inodep->nlink;
++			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
++							? S_IFIFO : S_IFSOCK;
++			init_special_inode(i, i->i_mode, 0);
++			break;
++		 }
++		 default:
++			ERROR("Unknown inode type %d in squashfs_iget!\n",
++					inodeb->inode_type);
++			goto failed_read1;
++	}
++	
++	insert_inode_hash(i);
++	return i;
++
++failed_read:
++	ERROR("Unable to read inode [%llx:%x]\n", block, offset);
++
++failed_read1:
++	return NULL;
++}
++
++
++static int read_fragment_index_table(struct super_block *s)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	/* Allocate fragment index table */
++	if (!(msblk->fragment_index = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES
++					(sblk->fragments), GFP_KERNEL))) {
++		ERROR("Failed to allocate uid/gid table\n");
++		return 0;
++	}
++   
++	if (SQUASHFS_FRAGMENT_INDEX_BYTES(sblk->fragments) &&
++					!squashfs_read_data(s, (char *)
++					msblk->fragment_index,
++					sblk->fragment_table_start,
++					SQUASHFS_FRAGMENT_INDEX_BYTES
++					(sblk->fragments) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++		ERROR("unable to read fragment index table\n");
++		return 0;
++	}
++
++	if (msblk->swap) {
++		int i;
++		long long fragment;
++
++		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES(sblk->fragments);
++									i++) {
++			SQUASHFS_SWAP_FRAGMENT_INDEXES((&fragment),
++						&msblk->fragment_index[i], 1);
++			msblk->fragment_index[i] = fragment;
++		}
++	}
++
++	return 1;
++}
++
++
++static int supported_squashfs_filesystem(struct squashfs_sb_info *msblk, int silent)
++{
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	msblk->iget = squashfs_iget;
++	msblk->read_blocklist = read_blocklist;
++	msblk->read_fragment_index_table = read_fragment_index_table;
++
++	if (sblk->s_major == 1) {
++		if (!squashfs_1_0_supported(msblk)) {
++			SERROR("Major/Minor mismatch, Squashfs 1.0 filesystems "
++				"are unsupported\n");
++			SERROR("Please recompile with "
++				"Squashfs 1.0 support enabled\n");
++			return 0;
++		}
++	} else if (sblk->s_major == 2) {
++		if (!squashfs_2_0_supported(msblk)) {
++			SERROR("Major/Minor mismatch, Squashfs 2.0 filesystems "
++				"are unsupported\n");
++			SERROR("Please recompile with "
++				"Squashfs 2.0 support enabled\n");
++			return 0;
++		}
++	} else if(sblk->s_major != SQUASHFS_MAJOR || sblk->s_minor >
++			SQUASHFS_MINOR) {
++		SERROR("Major/Minor mismatch, trying to mount newer %d.%d "
++				"filesystem\n", sblk->s_major, sblk->s_minor);
++		SERROR("Please update your kernel\n");
++		return 0;
++	}
++
++	return 1;
++}
++
++
++static int squashfs_fill_super(struct super_block *s, void *data, int silent)
++{
++	struct squashfs_sb_info *msblk;
++	struct squashfs_super_block *sblk;
++	int i;
++	char b[BDEVNAME_SIZE];
++	struct inode *root;
++
++	TRACE("Entered squashfs_read_superblock\n");
++
++	if (!(s->s_fs_info = kmalloc(sizeof(struct squashfs_sb_info),
++						GFP_KERNEL))) {
++		ERROR("Failed to allocate superblock\n");
++		goto failure;
++	}
++	memset(s->s_fs_info, 0, sizeof(struct squashfs_sb_info));
++	msblk = s->s_fs_info;
++	sblk = &msblk->sblk;
++	
++	msblk->devblksize = sb_min_blocksize(s, BLOCK_SIZE);
++	msblk->devblksize_log2 = ffz(~msblk->devblksize);
++
++	init_MUTEX(&msblk->read_data_mutex);
++	init_MUTEX(&msblk->read_page_mutex);
++	init_MUTEX(&msblk->block_cache_mutex);
++	init_MUTEX(&msblk->fragment_mutex);
++	init_MUTEX(&msblk->meta_index_mutex);
++	
++	init_waitqueue_head(&msblk->waitq);
++	init_waitqueue_head(&msblk->fragment_wait_queue);
++
++	if (!squashfs_read_data(s, (char *) sblk, SQUASHFS_START,
++					sizeof(struct squashfs_super_block) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++		SERROR("unable to read superblock\n");
++		goto failed_mount;
++	}
++
++	/* Check it is a SQUASHFS superblock */
++	msblk->swap = 0;
++	if ((s->s_magic = sblk->s_magic) != SQUASHFS_MAGIC) {
++		if (sblk->s_magic == SQUASHFS_MAGIC_SWAP) {
++			struct squashfs_super_block ssblk;
++
++			WARNING("Mounting a different endian SQUASHFS "
++				"filesystem on %s\n", bdevname(s->s_bdev, b));
++
++			SQUASHFS_SWAP_SUPER_BLOCK(&ssblk, sblk);
++			memcpy(sblk, &ssblk, sizeof(struct squashfs_super_block));
++			msblk->swap = 1;
++		} else  {
++			SERROR("Can't find a SQUASHFS superblock on %s\n",
++							bdevname(s->s_bdev, b));
++			goto failed_mount;
++		}
++	}
++
++	/* Check the MAJOR & MINOR versions */
++	if(!supported_squashfs_filesystem(msblk, silent))
++		goto failed_mount;
++
++	TRACE("Found valid superblock on %s\n", bdevname(s->s_bdev, b));
++	TRACE("Inodes are %scompressed\n",
++					SQUASHFS_UNCOMPRESSED_INODES
++					(sblk->flags) ? "un" : "");
++	TRACE("Data is %scompressed\n",
++					SQUASHFS_UNCOMPRESSED_DATA(sblk->flags)
++					? "un" : "");
++	TRACE("Check data is %s present in the filesystem\n",
++					SQUASHFS_CHECK_DATA(sblk->flags) ?
++					"" : "not");
++	TRACE("Filesystem size %lld bytes\n", sblk->bytes_used);
++	TRACE("Block size %d\n", sblk->block_size);
++	TRACE("Number of inodes %d\n", sblk->inodes);
++	if (sblk->s_major > 1)
++		TRACE("Number of fragments %d\n", sblk->fragments);
++	TRACE("Number of uids %d\n", sblk->no_uids);
++	TRACE("Number of gids %d\n", sblk->no_guids);
++	TRACE("sblk->inode_table_start %llx\n", sblk->inode_table_start);
++	TRACE("sblk->directory_table_start %llx\n", sblk->directory_table_start);
++	if (sblk->s_major > 1)
++		TRACE("sblk->fragment_table_start %llx\n",
++					sblk->fragment_table_start);
++	TRACE("sblk->uid_start %llx\n", sblk->uid_start);
++
++	s->s_flags |= MS_RDONLY;
++	s->s_op = &squashfs_ops;
++
++	/* Init inode_table block pointer array */
++	if (!(msblk->block_cache = kmalloc(sizeof(struct squashfs_cache) *
++					SQUASHFS_CACHED_BLKS, GFP_KERNEL))) {
++		ERROR("Failed to allocate block cache\n");
++		goto failed_mount;
++	}
++
++	for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
++		msblk->block_cache[i].block = SQUASHFS_INVALID_BLK;
++
++	msblk->next_cache = 0;
++
++	/* Allocate read_data block */
++	msblk->read_size = (sblk->block_size < SQUASHFS_METADATA_SIZE) ?
++					SQUASHFS_METADATA_SIZE :
++					sblk->block_size;
++
++	if (!(msblk->read_data = kmalloc(msblk->read_size, GFP_KERNEL))) {
++		ERROR("Failed to allocate read_data block\n");
++		goto failed_mount;
++	}
++
++	/* Allocate read_page block */
++	if (!(msblk->read_page = kmalloc(sblk->block_size, GFP_KERNEL))) {
++		ERROR("Failed to allocate read_page block\n");
++		goto failed_mount;
++	}
++
++	/* Allocate uid and gid tables */
++	if (!(msblk->uid = kmalloc((sblk->no_uids + sblk->no_guids) *
++					sizeof(unsigned int), GFP_KERNEL))) {
++		ERROR("Failed to allocate uid/gid table\n");
++		goto failed_mount;
++	}
++	msblk->guid = msblk->uid + sblk->no_uids;
++   
++	if (msblk->swap) {
++		unsigned int suid[sblk->no_uids + sblk->no_guids];
++
++		if (!squashfs_read_data(s, (char *) &suid, sblk->uid_start,
++					((sblk->no_uids + sblk->no_guids) *
++					 sizeof(unsigned int)) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++			ERROR("unable to read uid/gid table\n");
++			goto failed_mount;
++		}
++
++		SQUASHFS_SWAP_DATA(msblk->uid, suid, (sblk->no_uids +
++			sblk->no_guids), (sizeof(unsigned int) * 8));
++	} else
++		if (!squashfs_read_data(s, (char *) msblk->uid, sblk->uid_start,
++					((sblk->no_uids + sblk->no_guids) *
++					 sizeof(unsigned int)) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++			ERROR("unable to read uid/gid table\n");
++			goto failed_mount;
++		}
++
++
++	if (sblk->s_major == 1 && squashfs_1_0_supported(msblk))
++		goto allocate_root;
++
++	if (!(msblk->fragment = kmalloc(sizeof(struct squashfs_fragment_cache) *
++				SQUASHFS_CACHED_FRAGMENTS, GFP_KERNEL))) {
++		ERROR("Failed to allocate fragment block cache\n");
++		goto failed_mount;
++	}
++
++	for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) {
++		msblk->fragment[i].locked = 0;
++		msblk->fragment[i].block = SQUASHFS_INVALID_BLK;
++		msblk->fragment[i].data = NULL;
++	}
++
++	msblk->next_fragment = 0;
++
++	/* Allocate fragment index table */
++	if (msblk->read_fragment_index_table(s) == 0)
++		goto failed_mount;
++
++allocate_root:
++	if ((root = (msblk->iget)(s, sblk->root_inode)) == NULL)
++		goto failed_mount;
++
++	if ((s->s_root = d_alloc_root(root)) == NULL) {
++		ERROR("Root inode create failed\n");
++		iput(root);
++		goto failed_mount;
++	}
++
++	TRACE("Leaving squashfs_read_super\n");
++	return 0;
++
++failed_mount:
++	kfree(msblk->fragment_index);
++	kfree(msblk->fragment);
++	kfree(msblk->uid);
++	kfree(msblk->read_page);
++	kfree(msblk->read_data);
++	kfree(msblk->block_cache);
++	kfree(msblk->fragment_index_2);
++	kfree(s->s_fs_info);
++	s->s_fs_info = NULL;
++	return -EINVAL;
++
++failure:
++	return -ENOMEM;
++}
++
++
++static int squashfs_statfs(struct dentry *dentry, struct kstatfs *buf)
++{
++	struct super_block *s = dentry->d_sb;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	TRACE("Entered squashfs_statfs\n");
++
++	buf->f_type = SQUASHFS_MAGIC;
++	buf->f_bsize = sblk->block_size;
++	buf->f_blocks = ((sblk->bytes_used - 1) >> sblk->block_log) + 1;
++	buf->f_bfree = buf->f_bavail = 0;
++	buf->f_files = sblk->inodes;
++	buf->f_ffree = 0;
++	buf->f_namelen = SQUASHFS_NAME_LEN;
++
++	return 0;
++}
++
++
++static int squashfs_symlink_readpage(struct file *file, struct page *page)
++{
++	struct inode *inode = page->mapping->host;
++	int index = page->index << PAGE_CACHE_SHIFT, length, bytes;
++	long long block = SQUASHFS_I(inode)->start_block;
++	int offset = SQUASHFS_I(inode)->offset;
++	void *pageaddr = kmap(page);
++
++	TRACE("Entered squashfs_symlink_readpage, page index %ld, start block "
++				"%llx, offset %x\n", page->index,
++				SQUASHFS_I(inode)->start_block,
++				SQUASHFS_I(inode)->offset);
++
++	for (length = 0; length < index; length += bytes) {
++		if (!(bytes = squashfs_get_cached_block(inode->i_sb, NULL,
++				block, offset, PAGE_CACHE_SIZE, &block,
++				&offset))) {
++			ERROR("Unable to read symbolic link [%llx:%x]\n", block,
++					offset);
++			goto skip_read;
++		}
++	}
++
++	if (length != index) {
++		ERROR("(squashfs_symlink_readpage) length != index\n");
++		bytes = 0;
++		goto skip_read;
++	}
++
++	bytes = (i_size_read(inode) - length) > PAGE_CACHE_SIZE ? PAGE_CACHE_SIZE :
++					i_size_read(inode) - length;
++
++	if (!(bytes = squashfs_get_cached_block(inode->i_sb, pageaddr, block,
++					offset, bytes, &block, &offset)))
++		ERROR("Unable to read symbolic link [%llx:%x]\n", block, offset);
++
++skip_read:
++	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
++	kunmap(page);
++	SetPageUptodate(page);
++	unlock_page(page);
++
++	return 0;
++}
++
++
++struct meta_index *locate_meta_index(struct inode *inode, int index, int offset)
++{
++	struct meta_index *meta = NULL;
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	int i;
++
++	down(&msblk->meta_index_mutex);
++
++	TRACE("locate_meta_index: index %d, offset %d\n", index, offset);
++
++	if(msblk->meta_index == NULL)
++		goto not_allocated;
++
++	for (i = 0; i < SQUASHFS_META_NUMBER; i ++)
++		if (msblk->meta_index[i].inode_number == inode->i_ino &&
++				msblk->meta_index[i].offset >= offset &&
++				msblk->meta_index[i].offset <= index &&
++				msblk->meta_index[i].locked == 0) {
++			TRACE("locate_meta_index: entry %d, offset %d\n", i,
++					msblk->meta_index[i].offset);
++			meta = &msblk->meta_index[i];
++			offset = meta->offset;
++		}
++
++	if (meta)
++		meta->locked = 1;
++
++not_allocated:
++	up(&msblk->meta_index_mutex);
++
++	return meta;
++}
++
++
++struct meta_index *empty_meta_index(struct inode *inode, int offset, int skip)
++{
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct meta_index *meta = NULL;
++	int i;
++
++	down(&msblk->meta_index_mutex);
++
++	TRACE("empty_meta_index: offset %d, skip %d\n", offset, skip);
++
++	if(msblk->meta_index == NULL) {
++		if (!(msblk->meta_index = kmalloc(sizeof(struct meta_index) *
++					SQUASHFS_META_NUMBER, GFP_KERNEL))) {
++			ERROR("Failed to allocate meta_index\n");
++			goto failed;
++		}
++		for(i = 0; i < SQUASHFS_META_NUMBER; i++) {
++			msblk->meta_index[i].inode_number = 0;
++			msblk->meta_index[i].locked = 0;
++		}
++		msblk->next_meta_index = 0;
++	}
++
++	for(i = SQUASHFS_META_NUMBER; i &&
++			msblk->meta_index[msblk->next_meta_index].locked; i --)
++		msblk->next_meta_index = (msblk->next_meta_index + 1) %
++			SQUASHFS_META_NUMBER;
++
++	if(i == 0) {
++		TRACE("empty_meta_index: failed!\n");
++		goto failed;
++	}
++
++	TRACE("empty_meta_index: returned meta entry %d, %p\n",
++			msblk->next_meta_index,
++			&msblk->meta_index[msblk->next_meta_index]);
++
++	meta = &msblk->meta_index[msblk->next_meta_index];
++	msblk->next_meta_index = (msblk->next_meta_index + 1) %
++			SQUASHFS_META_NUMBER;
++
++	meta->inode_number = inode->i_ino;
++	meta->offset = offset;
++	meta->skip = skip;
++	meta->entries = 0;
++	meta->locked = 1;
++
++failed:
++	up(&msblk->meta_index_mutex);
++	return meta;
++}
++
++
++void release_meta_index(struct inode *inode, struct meta_index *meta)
++{
++	meta->locked = 0;
++}
++
++
++static int read_block_index(struct super_block *s, int blocks, char *block_list,
++		long long *start_block, int *offset)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	unsigned int *block_listp;
++	int block = 0;
++	
++	if (msblk->swap) {
++		char sblock_list[blocks << 2];
++
++		if (!squashfs_get_cached_block(s, sblock_list, *start_block,
++				*offset, blocks << 2, start_block, offset)) {
++			ERROR("Unable to read block list [%llx:%x]\n",
++				*start_block, *offset);
++			goto failure;
++		}
++		SQUASHFS_SWAP_INTS(((unsigned int *)block_list),
++				((unsigned int *)sblock_list), blocks);
++	} else
++		if (!squashfs_get_cached_block(s, block_list, *start_block,
++				*offset, blocks << 2, start_block, offset)) {
++			ERROR("Unable to read block list [%llx:%x]\n",
++				*start_block, *offset);
++			goto failure;
++		}
++
++	for (block_listp = (unsigned int *) block_list; blocks;
++				block_listp++, blocks --)
++		block += SQUASHFS_COMPRESSED_SIZE_BLOCK(*block_listp);
++
++	return block;
++
++failure:
++	return -1;
++}
++
++
++#define SIZE 256
++
++static inline int calculate_skip(int blocks) {
++	int skip = (blocks - 1) / ((SQUASHFS_SLOTS * SQUASHFS_META_ENTRIES + 1) * SQUASHFS_META_INDEXES);
++	return skip >= 7 ? 7 : skip + 1;
++}
++
++
++static int get_meta_index(struct inode *inode, int index,
++		long long *index_block, int *index_offset,
++		long long *data_block, char *block_list)
++{
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int skip = calculate_skip(i_size_read(inode) >> sblk->block_log);
++	int offset = 0;
++	struct meta_index *meta;
++	struct meta_entry *meta_entry;
++	long long cur_index_block = SQUASHFS_I(inode)->u.s1.block_list_start;
++	int cur_offset = SQUASHFS_I(inode)->offset;
++	long long cur_data_block = SQUASHFS_I(inode)->start_block;
++	int i;
++ 
++	index /= SQUASHFS_META_INDEXES * skip;
++
++	while ( offset < index ) {
++		meta = locate_meta_index(inode, index, offset + 1);
++
++		if (meta == NULL) {
++			if ((meta = empty_meta_index(inode, offset + 1,
++							skip)) == NULL)
++				goto all_done;
++		} else {
++			offset = index < meta->offset + meta->entries ? index :
++				meta->offset + meta->entries - 1;
++			meta_entry = &meta->meta_entry[offset - meta->offset];
++			cur_index_block = meta_entry->index_block + sblk->inode_table_start;
++			cur_offset = meta_entry->offset;
++			cur_data_block = meta_entry->data_block;
++			TRACE("get_meta_index: offset %d, meta->offset %d, "
++				"meta->entries %d\n", offset, meta->offset,
++				meta->entries);
++			TRACE("get_meta_index: index_block 0x%llx, offset 0x%x"
++				" data_block 0x%llx\n", cur_index_block,
++				cur_offset, cur_data_block);
++		}
++
++		for (i = meta->offset + meta->entries; i <= index &&
++				i < meta->offset + SQUASHFS_META_ENTRIES; i++) {
++			int blocks = skip * SQUASHFS_META_INDEXES;
++
++			while (blocks) {
++				int block = blocks > (SIZE >> 2) ? (SIZE >> 2) :
++					blocks;
++				int res = read_block_index(inode->i_sb, block,
++					block_list, &cur_index_block,
++					&cur_offset);
++
++				if (res == -1)
++					goto failed;
++
++				cur_data_block += res;
++				blocks -= block;
++			}
++
++			meta_entry = &meta->meta_entry[i - meta->offset];
++			meta_entry->index_block = cur_index_block - sblk->inode_table_start;
++			meta_entry->offset = cur_offset;
++			meta_entry->data_block = cur_data_block;
++			meta->entries ++;
++			offset ++;
++		}
++
++		TRACE("get_meta_index: meta->offset %d, meta->entries %d\n",
++				meta->offset, meta->entries);
++
++		release_meta_index(inode, meta);
++	}
++
++all_done:
++	*index_block = cur_index_block;
++	*index_offset = cur_offset;
++	*data_block = cur_data_block;
++
++	return offset * SQUASHFS_META_INDEXES * skip;
++
++failed:
++	release_meta_index(inode, meta);
++	return -1;
++}
++
++
++static long long read_blocklist(struct inode *inode, int index,
++				int readahead_blks, char *block_list,
++				unsigned short **block_p, unsigned int *bsize)
++{
++	long long block_ptr;
++	int offset;
++	long long block;
++	int res = get_meta_index(inode, index, &block_ptr, &offset, &block,
++		block_list);
++
++	TRACE("read_blocklist: res %d, index %d, block_ptr 0x%llx, offset"
++		       " 0x%x, block 0x%llx\n", res, index, block_ptr, offset,
++		       block);
++
++	if(res == -1)
++		goto failure;
++
++	index -= res;
++
++	while ( index ) {
++		int blocks = index > (SIZE >> 2) ? (SIZE >> 2) : index;
++		int res = read_block_index(inode->i_sb, blocks, block_list,
++			&block_ptr, &offset);
++		if (res == -1)
++			goto failure;
++		block += res;
++		index -= blocks;
++	}
++
++	if (read_block_index(inode->i_sb, 1, block_list,
++			&block_ptr, &offset) == -1)
++		goto failure;
++	*bsize = *((unsigned int *) block_list);
++
++	return block;
++
++failure:
++	return 0;
++}
++
++
++static int squashfs_readpage(struct file *file, struct page *page)
++{
++	struct inode *inode = page->mapping->host;
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	unsigned char block_list[SIZE];
++	long long block;
++	unsigned int bsize, i = 0, bytes = 0, byte_offset = 0;
++	int index = page->index >> (sblk->block_log - PAGE_CACHE_SHIFT);
++ 	void *pageaddr;
++	struct squashfs_fragment_cache *fragment = NULL;
++	char *data_ptr = msblk->read_page;
++	
++	int mask = (1 << (sblk->block_log - PAGE_CACHE_SHIFT)) - 1;
++	int start_index = page->index & ~mask;
++	int end_index = start_index | mask;
++
++	TRACE("Entered squashfs_readpage, page index %lx, start block %llx\n",
++					page->index,
++					SQUASHFS_I(inode)->start_block);
++
++	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
++					PAGE_CACHE_SHIFT))
++		goto skip_read;
++
++	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
++					|| index < (i_size_read(inode) >>
++					sblk->block_log)) {
++		if ((block = (msblk->read_blocklist)(inode, index, 1,
++					block_list, NULL, &bsize)) == 0)
++			goto skip_read;
++
++		down(&msblk->read_page_mutex);
++		
++		if (!(bytes = squashfs_read_data(inode->i_sb, msblk->read_page,
++					block, bsize, NULL))) {
++			ERROR("Unable to read page, block %llx, size %x\n", block,
++					bsize);
++			up(&msblk->read_page_mutex);
++			goto skip_read;
++		}
++	} else {
++		if ((fragment = get_cached_fragment(inode->i_sb,
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block,
++					SQUASHFS_I(inode)->u.s1.fragment_size))
++					== NULL) {
++			ERROR("Unable to read page, block %llx, size %x\n",
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block,
++					(int) SQUASHFS_I(inode)->
++					u.s1.fragment_size);
++			goto skip_read;
++		}
++		bytes = SQUASHFS_I(inode)->u.s1.fragment_offset +
++					(i_size_read(inode) & (sblk->block_size
++					- 1));
++		byte_offset = SQUASHFS_I(inode)->u.s1.fragment_offset;
++		data_ptr = fragment->data;
++	}
++
++	for (i = start_index; i <= end_index && byte_offset < bytes;
++					i++, byte_offset += PAGE_CACHE_SIZE) {
++		struct page *push_page;
++		int available_bytes = (bytes - byte_offset) > PAGE_CACHE_SIZE ?
++					PAGE_CACHE_SIZE : bytes - byte_offset;
++
++		TRACE("bytes %d, i %d, byte_offset %d, available_bytes %d\n",
++					bytes, i, byte_offset, available_bytes);
++
++		if (i == page->index)  {
++			pageaddr = kmap_atomic(page, KM_USER0);
++			memcpy(pageaddr, data_ptr + byte_offset,
++					available_bytes);
++			memset(pageaddr + available_bytes, 0,
++					PAGE_CACHE_SIZE - available_bytes);
++			kunmap_atomic(pageaddr, KM_USER0);
++			flush_dcache_page(page);
++			SetPageUptodate(page);
++			unlock_page(page);
++		} else if ((push_page =
++				grab_cache_page_nowait(page->mapping, i))) {
++ 			pageaddr = kmap_atomic(push_page, KM_USER0);
++
++			memcpy(pageaddr, data_ptr + byte_offset,
++					available_bytes);
++			memset(pageaddr + available_bytes, 0,
++					PAGE_CACHE_SIZE - available_bytes);
++			kunmap_atomic(pageaddr, KM_USER0);
++			flush_dcache_page(push_page);
++			SetPageUptodate(push_page);
++			unlock_page(push_page);
++			page_cache_release(push_page);
++		}
++	}
++
++	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
++					|| index < (i_size_read(inode) >>
++					sblk->block_log))
++		up(&msblk->read_page_mutex);
++	else
++		release_cached_fragment(msblk, fragment);
++
++	return 0;
++
++skip_read:
++	pageaddr = kmap_atomic(page, KM_USER0);
++	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
++	kunmap_atomic(pageaddr, KM_USER0);
++	flush_dcache_page(page);
++	SetPageUptodate(page);
++	unlock_page(page);
++
++	return 0;
++}
++
++
++static int squashfs_readpage4K(struct file *file, struct page *page)
++{
++	struct inode *inode = page->mapping->host;
++	struct squashfs_sb_info *msblk = inode->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	unsigned char block_list[SIZE];
++	long long block;
++	unsigned int bsize, bytes = 0;
++ 	void *pageaddr;
++	
++	TRACE("Entered squashfs_readpage4K, page index %lx, start block %llx\n",
++					page->index,
++					SQUASHFS_I(inode)->start_block);
++
++	if (page->index >= ((i_size_read(inode) + PAGE_CACHE_SIZE - 1) >>
++					PAGE_CACHE_SHIFT)) {
++		pageaddr = kmap_atomic(page, KM_USER0);
++		goto skip_read;
++	}
++
++	if (SQUASHFS_I(inode)->u.s1.fragment_start_block == SQUASHFS_INVALID_BLK
++					|| page->index < (i_size_read(inode) >>
++					sblk->block_log)) {
++		block = (msblk->read_blocklist)(inode, page->index, 1,
++					block_list, NULL, &bsize);
++
++		down(&msblk->read_page_mutex);
++		bytes = squashfs_read_data(inode->i_sb, msblk->read_page, block,
++					bsize, NULL);
++		pageaddr = kmap_atomic(page, KM_USER0);
++		if (bytes)
++			memcpy(pageaddr, msblk->read_page, bytes);
++		else
++			ERROR("Unable to read page, block %llx, size %x\n",
++					block, bsize);
++		up(&msblk->read_page_mutex);
++	} else {
++		struct squashfs_fragment_cache *fragment =
++			get_cached_fragment(inode->i_sb,
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block,
++					SQUASHFS_I(inode)-> u.s1.fragment_size);
++		pageaddr = kmap_atomic(page, KM_USER0);
++		if (fragment) {
++			bytes = i_size_read(inode) & (sblk->block_size - 1);
++			memcpy(pageaddr, fragment->data + SQUASHFS_I(inode)->
++					u.s1.fragment_offset, bytes);
++			release_cached_fragment(msblk, fragment);
++		} else
++			ERROR("Unable to read page, block %llx, size %x\n",
++					SQUASHFS_I(inode)->
++					u.s1.fragment_start_block, (int)
++					SQUASHFS_I(inode)-> u.s1.fragment_size);
++	}
++
++skip_read:
++	memset(pageaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
++	kunmap_atomic(pageaddr, KM_USER0);
++	flush_dcache_page(page);
++	SetPageUptodate(page);
++	unlock_page(page);
++
++	return 0;
++}
++
++
++static int get_dir_index_using_offset(struct super_block *s, long long 
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				long long f_pos)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	struct squashfs_dir_index index;
++
++	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
++					i_count, (unsigned int) f_pos);
++
++	f_pos =- 3;
++	if (f_pos == 0)
++		goto finish;
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX(&index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) &index,
++					index_start, index_offset,
++					sizeof(index), &index_start,
++					&index_offset);
++
++		if (index.index > f_pos)
++			break;
++
++		squashfs_get_cached_block(s, NULL, index_start, index_offset,
++					index.size + 1, &index_start,
++					&index_offset);
++
++		length = index.index;
++		*next_block = index.start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++
++finish:
++	return length + 3;
++}
++
++
++static int get_dir_index_using_name(struct super_block *s, long long
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				const char *name, int size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	char buffer[sizeof(struct squashfs_dir_index) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_index *index = (struct squashfs_dir_index *) buffer;
++	char str[SQUASHFS_NAME_LEN + 1];
++
++	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
++
++	strncpy(str, name, size);
++	str[size] = '\0';
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX(index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) index,
++					index_start, index_offset,
++					sizeof(struct squashfs_dir_index),
++					&index_start, &index_offset);
++
++		squashfs_get_cached_block(s, index->name, index_start,
++					index_offset, index->size + 1,
++					&index_start, &index_offset);
++
++		index->name[index->size + 1] = '\0';
++
++		if (strcmp(index->name, str) > 0)
++			break;
++
++		length = index->index;
++		*next_block = index->start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++	return length + 3;
++}
++
++		
++static int squashfs_readdir(struct file *file, void *dirent, filldir_t filldir)
++{
++	struct inode *i = file->f_dentry->d_inode;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++		sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
++		dir_count;
++	struct squashfs_dir_header dirh;
++	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
++
++	TRACE("Entered squashfs_readdir [%llx:%x]\n", next_block, next_offset);
++
++	while(file->f_pos < 3) {
++		char *name;
++		int size, i_ino;
++
++		if(file->f_pos == 0) {
++			name = ".";
++			size = 1;
++			i_ino = i->i_ino;
++		} else {
++			name = "..";
++			size = 2;
++			i_ino = SQUASHFS_I(i)->u.s2.parent_inode;
++		}
++		TRACE("Calling filldir(%x, %s, %d, %d, %d, %d)\n",
++				(unsigned int) dirent, name, size, (int)
++				file->f_pos, i_ino,
++				squashfs_filetype_table[1]);
++
++		if (filldir(dirent, name, size,
++				file->f_pos, i_ino,
++				squashfs_filetype_table[1]) < 0) {
++				TRACE("Filldir returned less than 0\n");
++				goto finish;
++		}
++		file->f_pos += size;
++		dirs_read++;
++	}
++
++	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count,
++				file->f_pos);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header sdirh;
++			
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block, next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++				
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block, next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++						next_block, next_offset,
++						dire->size + 1, &next_block,
++						&next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (file->f_pos >= length)
++				continue;
++
++			dire->name[dire->size + 1] = '\0';
++
++			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d, %d)\n",
++					(unsigned int) dirent, dire->name,
++					dire->size + 1, (int) file->f_pos,
++					dirh.start_block, dire->offset,
++					dirh.inode_number + dire->inode_number,
++					squashfs_filetype_table[dire->type]);
++
++			if (filldir(dirent, dire->name, dire->size + 1,
++					file->f_pos,
++					dirh.inode_number + dire->inode_number,
++					squashfs_filetype_table[dire->type])
++					< 0) {
++				TRACE("Filldir returned less than 0\n");
++				goto finish;
++			}
++			file->f_pos = length;
++			dirs_read++;
++		}
++	}
++
++finish:
++	return dirs_read;
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	return 0;
++}
++
++
++static struct dentry *squashfs_lookup(struct inode *i, struct dentry *dentry,
++				struct nameidata *nd)
++{
++	const unsigned char *name = dentry->d_name.name;
++	int len = dentry->d_name.len;
++	struct inode *inode = NULL;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++				sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0,
++				dir_count;
++	struct squashfs_dir_header dirh;
++	char buffer[sizeof(struct squashfs_dir_entry) + SQUASHFS_NAME_LEN];
++	struct squashfs_dir_entry *dire = (struct squashfs_dir_entry *) buffer;
++
++	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
++
++	if (len > SQUASHFS_NAME_LEN)
++		goto exit_loop;
++
++	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count, name,
++				len);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header sdirh;
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block,next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++				
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block,next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++					next_block, next_offset, dire->size + 1,
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (name[0] < dire->name[0])
++				goto exit_loop;
++
++			if ((len == dire->size + 1) && !strncmp(name,
++						dire->name, len)) {
++				squashfs_inode_t ino =
++					SQUASHFS_MKINODE(dirh.start_block,
++					dire->offset);
++
++				TRACE("calling squashfs_iget for directory "
++					"entry %s, inode %x:%x, %d\n", name,
++					dirh.start_block, dire->offset,
++					dirh.inode_number + dire->inode_number);
++
++				inode = (msblk->iget)(i->i_sb, ino);
++
++				goto exit_loop;
++			}
++		}
++	}
++
++exit_loop:
++	d_add(dentry, inode);
++	return ERR_PTR(0);
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	goto exit_loop;
++}
++
++
++static void squashfs_put_super(struct super_block *s)
++{
++	int i;
++
++	if (s->s_fs_info) {
++		struct squashfs_sb_info *sbi = s->s_fs_info;
++		if (sbi->block_cache)
++			for (i = 0; i < SQUASHFS_CACHED_BLKS; i++)
++				if (sbi->block_cache[i].block !=
++							SQUASHFS_INVALID_BLK)
++					kfree(sbi->block_cache[i].data);
++		if (sbi->fragment)
++			for (i = 0; i < SQUASHFS_CACHED_FRAGMENTS; i++) 
++				SQUASHFS_FREE(sbi->fragment[i].data);
++		kfree(sbi->fragment);
++		kfree(sbi->block_cache);
++		kfree(sbi->read_data);
++		kfree(sbi->read_page);
++		kfree(sbi->uid);
++		kfree(sbi->fragment_index);
++		kfree(sbi->fragment_index_2);
++		kfree(sbi->meta_index);
++		kfree(s->s_fs_info);
++		s->s_fs_info = NULL;
++	}
++}
++
++
++static int squashfs_get_sb(struct file_system_type *fs_type,
++				int flags, const char *dev_name, void *data, struct vfsmount *mnt)
++{
++	return get_sb_bdev(fs_type, flags, dev_name, data, squashfs_fill_super, mnt);
++}
++
++
++static int __init init_squashfs_fs(void)
++{
++	int err = init_inodecache();
++	if (err)
++		goto out;
++
++	printk(KERN_INFO "squashfs: version 3.0 (2006/03/15) "
++		"Phillip Lougher\n");
++
++	if (!(stream.workspace = vmalloc(zlib_inflate_workspacesize()))) {
++		ERROR("Failed to allocate zlib workspace\n");
++		destroy_inodecache();
++		err = -ENOMEM;
++		goto out;
++	}
++
++	if ((err = register_filesystem(&squashfs_fs_type))) {
++		vfree(stream.workspace);
++		destroy_inodecache();
++	}
++
++out:
++	return err;
++}
++
++
++static void __exit exit_squashfs_fs(void)
++{
++	vfree(stream.workspace);
++	unregister_filesystem(&squashfs_fs_type);
++	destroy_inodecache();
++}
++
++
++static kmem_cache_t * squashfs_inode_cachep;
++
++
++static struct inode *squashfs_alloc_inode(struct super_block *sb)
++{
++	struct squashfs_inode_info *ei;
++	ei = kmem_cache_alloc(squashfs_inode_cachep, GFP_KERNEL);
++	if (!ei)
++		return NULL;
++	return &ei->vfs_inode;
++}
++
++
++static void squashfs_destroy_inode(struct inode *inode)
++{
++	kmem_cache_free(squashfs_inode_cachep, SQUASHFS_I(inode));
++}
++
++
++static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags)
++{
++	struct squashfs_inode_info *ei = foo;
++
++	if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) ==
++							SLAB_CTOR_CONSTRUCTOR)
++		inode_init_once(&ei->vfs_inode);
++}
++ 
++
++static int __init init_inodecache(void)
++{
++	squashfs_inode_cachep = kmem_cache_create("squashfs_inode_cache",
++	     sizeof(struct squashfs_inode_info),
++	     0, SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT,
++	     init_once, NULL);
++	if (squashfs_inode_cachep == NULL)
++		return -ENOMEM;
++	return 0;
++}
++
++
++static void destroy_inodecache(void)
++{
++	kmem_cache_destroy(squashfs_inode_cachep);
++}
++
++
++module_init(init_squashfs_fs);
++module_exit(exit_squashfs_fs);
++MODULE_DESCRIPTION("squashfs, a compressed read-only filesystem");
++MODULE_AUTHOR("Phillip Lougher <phillip@lougher.org.uk>");
+Index: git/fs/squashfs/Makefile
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/fs/squashfs/Makefile	2006-10-31 21:26:45.000000000 +0000
+@@ -0,0 +1,7 @@
++#
++# Makefile for the linux squashfs routines.
++#
++
++obj-$(CONFIG_SQUASHFS) += squashfs.o
++squashfs-y += inode.o
++squashfs-y += squashfs2_0.o
+Index: git/fs/squashfs/squashfs2_0.c
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/fs/squashfs/squashfs2_0.c	2006-11-01 18:01:49.000000000 +0000
+@@ -0,0 +1,757 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs2_0.c
++ */
++
++#include <linux/types.h>
++#include <linux/squashfs_fs.h>
++#include <linux/module.h>
++#include <linux/errno.h>
++#include <linux/slab.h>
++#include <linux/fs.h>
++#include <linux/smp_lock.h>
++#include <linux/slab.h>
++#include <linux/squashfs_fs_sb.h>
++#include <linux/squashfs_fs_i.h>
++#include <linux/buffer_head.h>
++#include <linux/vfs.h>
++#include <linux/init.h>
++#include <linux/dcache.h>
++#include <linux/wait.h>
++#include <linux/zlib.h>
++#include <linux/blkdev.h>
++#include <linux/vmalloc.h>
++#include <asm/uaccess.h>
++#include <asm/semaphore.h>
++
++#include "squashfs.h"
++static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir);
++static struct dentry *squashfs_lookup_2(struct inode *, struct dentry *,
++				struct nameidata *);
++
++static struct file_operations squashfs_dir_ops_2 = {
++	.read = generic_read_dir,
++	.readdir = squashfs_readdir_2
++};
++
++static struct inode_operations squashfs_dir_inode_ops_2 = {
++	.lookup = squashfs_lookup_2
++};
++
++static unsigned char squashfs_filetype_table[] = {
++	DT_UNKNOWN, DT_DIR, DT_REG, DT_LNK, DT_BLK, DT_CHR, DT_FIFO, DT_SOCK
++};
++
++static int read_fragment_index_table_2(struct super_block *s)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	if (!(msblk->fragment_index_2 = kmalloc(SQUASHFS_FRAGMENT_INDEX_BYTES_2
++					(sblk->fragments), GFP_KERNEL))) {
++		ERROR("Failed to allocate uid/gid table\n");
++		return 0;
++	}
++   
++	if (SQUASHFS_FRAGMENT_INDEX_BYTES_2(sblk->fragments) &&
++					!squashfs_read_data(s, (char *)
++					msblk->fragment_index_2,
++					sblk->fragment_table_start,
++					SQUASHFS_FRAGMENT_INDEX_BYTES_2
++					(sblk->fragments) |
++					SQUASHFS_COMPRESSED_BIT_BLOCK, NULL)) {
++		ERROR("unable to read fragment index table\n");
++		return 0;
++	}
++
++	if (msblk->swap) {
++		int i;
++		unsigned int fragment;
++
++		for (i = 0; i < SQUASHFS_FRAGMENT_INDEXES_2(sblk->fragments);
++									i++) {
++			SQUASHFS_SWAP_FRAGMENT_INDEXES_2((&fragment),
++						&msblk->fragment_index_2[i], 1);
++			msblk->fragment_index_2[i] = fragment;
++		}
++	}
++
++	return 1;
++}
++
++
++static int get_fragment_location_2(struct super_block *s, unsigned int fragment,
++				long long *fragment_start_block,
++				unsigned int *fragment_size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	long long start_block =
++		msblk->fragment_index_2[SQUASHFS_FRAGMENT_INDEX_2(fragment)];
++	int offset = SQUASHFS_FRAGMENT_INDEX_OFFSET_2(fragment);
++	struct squashfs_fragment_entry_2 fragment_entry;
++
++	if (msblk->swap) {
++		struct squashfs_fragment_entry_2 sfragment_entry;
++
++		if (!squashfs_get_cached_block(s, (char *) &sfragment_entry,
++					start_block, offset,
++					sizeof(sfragment_entry), &start_block,
++					&offset))
++			goto out;
++		SQUASHFS_SWAP_FRAGMENT_ENTRY_2(&fragment_entry, &sfragment_entry);
++	} else
++		if (!squashfs_get_cached_block(s, (char *) &fragment_entry,
++					start_block, offset,
++					sizeof(fragment_entry), &start_block,
++					&offset))
++			goto out;
++
++	*fragment_start_block = fragment_entry.start_block;
++	*fragment_size = fragment_entry.size;
++
++	return 1;
++
++out:
++	return 0;
++}
++
++
++static struct inode *squashfs_new_inode(struct super_block *s,
++		struct squashfs_base_inode_header_2 *inodeb, unsigned int ino)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	struct inode *i = new_inode(s);
++
++	if (i) {
++		i->i_ino = ino;
++		i->i_mtime.tv_sec = sblk->mkfs_time;
++		i->i_atime.tv_sec = sblk->mkfs_time;
++		i->i_ctime.tv_sec = sblk->mkfs_time;
++		i->i_uid = msblk->uid[inodeb->uid];
++		i->i_mode = inodeb->mode;
++		i->i_nlink = 1;
++		i->i_size = 0;
++		if (inodeb->guid == SQUASHFS_GUIDS)
++			i->i_gid = i->i_uid;
++		else
++			i->i_gid = msblk->guid[inodeb->guid];
++	}
++
++	return i;
++}
++
++
++static struct inode *squashfs_iget_2(struct super_block *s, squashfs_inode_t inode)
++{
++	struct inode *i;
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	unsigned int block = SQUASHFS_INODE_BLK(inode) +
++		sblk->inode_table_start;
++	unsigned int offset = SQUASHFS_INODE_OFFSET(inode);
++	unsigned int ino = SQUASHFS_MK_VFS_INODE(block
++		- sblk->inode_table_start, offset);
++	long long next_block;
++	unsigned int next_offset;
++	union squashfs_inode_header_2 id, sid;
++	struct squashfs_base_inode_header_2 *inodeb = &id.base,
++					  *sinodeb = &sid.base;
++
++	TRACE("Entered squashfs_iget\n");
++
++	if (msblk->swap) {
++		if (!squashfs_get_cached_block(s, (char *) sinodeb, block,
++					offset, sizeof(*sinodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++		SQUASHFS_SWAP_BASE_INODE_HEADER_2(inodeb, sinodeb,
++					sizeof(*sinodeb));
++	} else
++		if (!squashfs_get_cached_block(s, (char *) inodeb, block,
++					offset, sizeof(*inodeb), &next_block,
++					&next_offset))
++			goto failed_read;
++
++	switch(inodeb->inode_type) {
++		case SQUASHFS_FILE_TYPE: {
++			struct squashfs_reg_inode_header_2 *inodep = &id.reg;
++			struct squashfs_reg_inode_header_2 *sinodep = &sid.reg;
++			long long frag_blk;
++			unsigned int frag_size;
++				
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_REG_INODE_HEADER_2(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			frag_blk = SQUASHFS_INVALID_BLK;
++			if (inodep->fragment != SQUASHFS_INVALID_FRAG &&
++					!get_fragment_location_2(s,
++					inodep->fragment, &frag_blk, &frag_size))
++				goto failed_read;
++				
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->file_size;
++			i->i_fop = &generic_ro_fops;
++			i->i_mode |= S_IFREG;
++			i->i_mtime.tv_sec = inodep->mtime;
++			i->i_atime.tv_sec = inodep->mtime;
++			i->i_ctime.tv_sec = inodep->mtime;
++			i->i_blocks = ((i->i_size - 1) >> 9) + 1;
++			SQUASHFS_I(i)->u.s1.fragment_start_block = frag_blk;
++			SQUASHFS_I(i)->u.s1.fragment_size = frag_size;
++			SQUASHFS_I(i)->u.s1.fragment_offset = inodep->offset;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->u.s1.block_list_start = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++			if (sblk->block_size > 4096)
++				i->i_data.a_ops = &squashfs_aops;
++			else
++				i->i_data.a_ops = &squashfs_aops_4K;
++
++			TRACE("File inode %x:%x, start_block %x, "
++					"block_list_start %llx, offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, next_block,
++					next_offset);
++			break;
++		}
++		case SQUASHFS_DIR_TYPE: {
++			struct squashfs_dir_inode_header_2 *inodep = &id.dir;
++			struct squashfs_dir_inode_header_2 *sinodep = &sid.dir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DIR_INODE_HEADER_2(inodep, sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops_2;
++			i->i_fop = &squashfs_dir_ops_2;
++			i->i_mode |= S_IFDIR;
++			i->i_mtime.tv_sec = inodep->mtime;
++			i->i_atime.tv_sec = inodep->mtime;
++			i->i_ctime.tv_sec = inodep->mtime;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count = 0;
++			SQUASHFS_I(i)->u.s2.parent_inode = 0;
++
++			TRACE("Directory inode %x:%x, start_block %x, offset "
++					"%x\n", SQUASHFS_INODE_BLK(inode),
++					offset, inodep->start_block,
++					inodep->offset);
++			break;
++		}
++		case SQUASHFS_LDIR_TYPE: {
++			struct squashfs_ldir_inode_header_2 *inodep = &id.ldir;
++			struct squashfs_ldir_inode_header_2 *sinodep = &sid.ldir;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_LDIR_INODE_HEADER_2(inodep,
++						sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->file_size;
++			i->i_op = &squashfs_dir_inode_ops_2;
++			i->i_fop = &squashfs_dir_ops_2;
++			i->i_mode |= S_IFDIR;
++			i->i_mtime.tv_sec = inodep->mtime;
++			i->i_atime.tv_sec = inodep->mtime;
++			i->i_ctime.tv_sec = inodep->mtime;
++			SQUASHFS_I(i)->start_block = inodep->start_block;
++			SQUASHFS_I(i)->offset = inodep->offset;
++			SQUASHFS_I(i)->u.s2.directory_index_start = next_block;
++			SQUASHFS_I(i)->u.s2.directory_index_offset =
++								next_offset;
++			SQUASHFS_I(i)->u.s2.directory_index_count =
++								inodep->i_count;
++			SQUASHFS_I(i)->u.s2.parent_inode = 0;
++
++			TRACE("Long directory inode %x:%x, start_block %x, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->start_block, inodep->offset);
++			break;
++		}
++		case SQUASHFS_SYMLINK_TYPE: {
++			struct squashfs_symlink_inode_header_2 *inodep =
++								&id.symlink;
++			struct squashfs_symlink_inode_header_2 *sinodep =
++								&sid.symlink;
++	
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(inodep,
++								sinodep);
++			} else
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_size = inodep->symlink_size;
++			i->i_op = &page_symlink_inode_operations;
++			i->i_data.a_ops = &squashfs_symlink_aops;
++			i->i_mode |= S_IFLNK;
++			SQUASHFS_I(i)->start_block = next_block;
++			SQUASHFS_I(i)->offset = next_offset;
++
++			TRACE("Symbolic link inode %x:%x, start_block %llx, "
++					"offset %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					next_block, next_offset);
++			break;
++		 }
++		 case SQUASHFS_BLKDEV_TYPE:
++		 case SQUASHFS_CHRDEV_TYPE: {
++			struct squashfs_dev_inode_header_2 *inodep = &id.dev;
++			struct squashfs_dev_inode_header_2 *sinodep = &sid.dev;
++
++			if (msblk->swap) {
++				if (!squashfs_get_cached_block(s, (char *)
++						sinodep, block, offset,
++						sizeof(*sinodep), &next_block,
++						&next_offset))
++					goto failed_read;
++				SQUASHFS_SWAP_DEV_INODE_HEADER_2(inodep, sinodep);
++			} else	
++				if (!squashfs_get_cached_block(s, (char *)
++						inodep, block, offset,
++						sizeof(*inodep), &next_block,
++						&next_offset))
++					goto failed_read;
++
++			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_mode |= (inodeb->inode_type ==
++					SQUASHFS_CHRDEV_TYPE) ?  S_IFCHR :
++					S_IFBLK;
++			init_special_inode(i, i->i_mode,
++					old_decode_dev(inodep->rdev));
++
++			TRACE("Device inode %x:%x, rdev %x\n",
++					SQUASHFS_INODE_BLK(inode), offset,
++					inodep->rdev);
++			break;
++		 }
++		 case SQUASHFS_FIFO_TYPE:
++		 case SQUASHFS_SOCKET_TYPE: {
++			if ((i = squashfs_new_inode(s, inodeb, ino)) == NULL)
++				goto failed_read1;
++
++			i->i_mode |= (inodeb->inode_type == SQUASHFS_FIFO_TYPE)
++							? S_IFIFO : S_IFSOCK;
++			init_special_inode(i, i->i_mode, 0);
++			break;
++		 }
++		 default:
++			ERROR("Unknown inode type %d in squashfs_iget!\n",
++					inodeb->inode_type);
++			goto failed_read1;
++	}
++	
++	insert_inode_hash(i);
++	return i;
++
++failed_read:
++	ERROR("Unable to read inode [%x:%x]\n", block, offset);
++
++failed_read1:
++	return NULL;
++}
++
++
++static int get_dir_index_using_offset(struct super_block *s, long long 
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				long long f_pos)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	struct squashfs_dir_index_2 index;
++
++	TRACE("Entered get_dir_index_using_offset, i_count %d, f_pos %d\n",
++					i_count, (unsigned int) f_pos);
++
++	if (f_pos == 0)
++		goto finish;
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index_2 sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX_2(&index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) &index,
++					index_start, index_offset,
++					sizeof(index), &index_start,
++					&index_offset);
++
++		if (index.index > f_pos)
++			break;
++
++		squashfs_get_cached_block(s, NULL, index_start, index_offset,
++					index.size + 1, &index_start,
++					&index_offset);
++
++		length = index.index;
++		*next_block = index.start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++
++finish:
++	return length;
++}
++
++
++static int get_dir_index_using_name(struct super_block *s, long long
++				*next_block, unsigned int *next_offset,
++				long long index_start,
++				unsigned int index_offset, int i_count,
++				const char *name, int size)
++{
++	struct squashfs_sb_info *msblk = s->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	int i, length = 0;
++	char buffer[sizeof(struct squashfs_dir_index_2) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_index_2 *index = (struct squashfs_dir_index_2 *) buffer;
++	char str[SQUASHFS_NAME_LEN + 1];
++
++	TRACE("Entered get_dir_index_using_name, i_count %d\n", i_count);
++
++	strncpy(str, name, size);
++	str[size] = '\0';
++
++	for (i = 0; i < i_count; i++) {
++		if (msblk->swap) {
++			struct squashfs_dir_index_2 sindex;
++			squashfs_get_cached_block(s, (char *) &sindex,
++					index_start, index_offset,
++					sizeof(sindex), &index_start,
++					&index_offset);
++			SQUASHFS_SWAP_DIR_INDEX_2(index, &sindex);
++		} else
++			squashfs_get_cached_block(s, (char *) index,
++					index_start, index_offset,
++					sizeof(struct squashfs_dir_index_2),
++					&index_start, &index_offset);
++
++		squashfs_get_cached_block(s, index->name, index_start,
++					index_offset, index->size + 1,
++					&index_start, &index_offset);
++
++		index->name[index->size + 1] = '\0';
++
++		if (strcmp(index->name, str) > 0)
++			break;
++
++		length = index->index;
++		*next_block = index->start_block + sblk->directory_table_start;
++	}
++
++	*next_offset = (length + *next_offset) % SQUASHFS_METADATA_SIZE;
++	return length;
++}
++
++		
++static int squashfs_readdir_2(struct file *file, void *dirent, filldir_t filldir)
++{
++	struct inode *i = file->f_dentry->d_inode;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++		sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0, dirs_read = 0,
++		dir_count;
++	struct squashfs_dir_header_2 dirh;
++	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN + 1];
++	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
++
++	TRACE("Entered squashfs_readdir_2 [%llx:%x]\n", next_block, next_offset);
++
++	length = get_dir_index_using_offset(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count,
++				file->f_pos);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header_2 sdirh;
++			
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry_2 sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block, next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++				
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block, next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++						next_block, next_offset,
++						dire->size + 1, &next_block,
++						&next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (file->f_pos >= length)
++				continue;
++
++			dire->name[dire->size + 1] = '\0';
++
++			TRACE("Calling filldir(%x, %s, %d, %d, %x:%x, %d)\n",
++					(unsigned int) dirent, dire->name,
++					dire->size + 1, (int) file->f_pos,
++					dirh.start_block, dire->offset,
++					squashfs_filetype_table[dire->type]);
++
++			if (filldir(dirent, dire->name, dire->size + 1,
++					file->f_pos, SQUASHFS_MK_VFS_INODE(
++					dirh.start_block, dire->offset),
++					squashfs_filetype_table[dire->type])
++					< 0) {
++				TRACE("Filldir returned less than 0\n");
++				goto finish;
++			}
++			file->f_pos = length;
++			dirs_read++;
++		}
++	}
++
++finish:
++	return dirs_read;
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	return 0;
++}
++
++
++static struct dentry *squashfs_lookup_2(struct inode *i, struct dentry *dentry,
++				struct nameidata *nd)
++{
++	const unsigned char *name = dentry->d_name.name;
++	int len = dentry->d_name.len;
++	struct inode *inode = NULL;
++	struct squashfs_sb_info *msblk = i->i_sb->s_fs_info;
++	struct squashfs_super_block *sblk = &msblk->sblk;
++	long long next_block = SQUASHFS_I(i)->start_block +
++				sblk->directory_table_start;
++	int next_offset = SQUASHFS_I(i)->offset, length = 0,
++				dir_count;
++	struct squashfs_dir_header_2 dirh;
++	char buffer[sizeof(struct squashfs_dir_entry_2) + SQUASHFS_NAME_LEN];
++	struct squashfs_dir_entry_2 *dire = (struct squashfs_dir_entry_2 *) buffer;
++	int sorted = sblk->s_major == 2 && sblk->s_minor >= 1;
++
++	TRACE("Entered squashfs_lookup [%llx:%x]\n", next_block, next_offset);
++
++	if (len > SQUASHFS_NAME_LEN)
++		goto exit_loop;
++
++	length = get_dir_index_using_name(i->i_sb, &next_block, &next_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_start,
++				SQUASHFS_I(i)->u.s2.directory_index_offset,
++				SQUASHFS_I(i)->u.s2.directory_index_count, name,
++				len);
++
++	while (length < i_size_read(i)) {
++		/* read directory header */
++		if (msblk->swap) {
++			struct squashfs_dir_header_2 sdirh;
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &sdirh,
++					next_block, next_offset, sizeof(sdirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(sdirh);
++			SQUASHFS_SWAP_DIR_HEADER_2(&dirh, &sdirh);
++		} else {
++			if (!squashfs_get_cached_block(i->i_sb, (char *) &dirh,
++					next_block, next_offset, sizeof(dirh),
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += sizeof(dirh);
++		}
++
++		dir_count = dirh.count + 1;
++		while (dir_count--) {
++			if (msblk->swap) {
++				struct squashfs_dir_entry_2 sdire;
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						&sdire, next_block,next_offset,
++						sizeof(sdire), &next_block,
++						&next_offset))
++					goto failed_read;
++				
++				length += sizeof(sdire);
++				SQUASHFS_SWAP_DIR_ENTRY_2(dire, &sdire);
++			} else {
++				if (!squashfs_get_cached_block(i->i_sb, (char *)
++						dire, next_block,next_offset,
++						sizeof(*dire), &next_block,
++						&next_offset))
++					goto failed_read;
++
++				length += sizeof(*dire);
++			}
++
++			if (!squashfs_get_cached_block(i->i_sb, dire->name,
++					next_block, next_offset, dire->size + 1,
++					&next_block, &next_offset))
++				goto failed_read;
++
++			length += dire->size + 1;
++
++			if (sorted && name[0] < dire->name[0])
++				goto exit_loop;
++
++			if ((len == dire->size + 1) && !strncmp(name,
++						dire->name, len)) {
++				squashfs_inode_t ino =
++					SQUASHFS_MKINODE(dirh.start_block,
++					dire->offset);
++
++				TRACE("calling squashfs_iget for directory "
++					"entry %s, inode %x:%x, %lld\n", name,
++					dirh.start_block, dire->offset, ino);
++
++				inode = (msblk->iget)(i->i_sb, ino);
++
++				goto exit_loop;
++			}
++		}
++	}
++
++exit_loop:
++	d_add(dentry, inode);
++	return ERR_PTR(0);
++
++failed_read:
++	ERROR("Unable to read directory block [%llx:%x]\n", next_block,
++		next_offset);
++	goto exit_loop;
++}
++
++
++int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
++{
++	struct squashfs_super_block *sblk = &msblk->sblk;
++
++	msblk->iget = squashfs_iget_2;
++	msblk->read_fragment_index_table = read_fragment_index_table_2;
++
++	sblk->bytes_used = sblk->bytes_used_2;
++	sblk->uid_start = sblk->uid_start_2;
++	sblk->guid_start = sblk->guid_start_2;
++	sblk->inode_table_start = sblk->inode_table_start_2;
++	sblk->directory_table_start = sblk->directory_table_start_2;
++	sblk->fragment_table_start = sblk->fragment_table_start_2;
++
++	return 1;
++}
+Index: git/fs/squashfs/squashfs.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/fs/squashfs/squashfs.h	2006-10-31 21:26:45.000000000 +0000
+@@ -0,0 +1,86 @@
++/*
++ * Squashfs - a compressed read only filesystem for Linux
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs.h
++ */
++
++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++#undef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++#endif
++
++#ifdef SQUASHFS_TRACE
++#define TRACE(s, args...)	printk(KERN_NOTICE "SQUASHFS: "s, ## args)
++#else
++#define TRACE(s, args...)	{}
++#endif
++
++#define ERROR(s, args...)	printk(KERN_ERR "SQUASHFS error: "s, ## args)
++
++#define SERROR(s, args...)	do { \
++				if (!silent) \
++				printk(KERN_ERR "SQUASHFS error: "s, ## args);\
++				} while(0)
++
++#define WARNING(s, args...)	printk(KERN_WARNING "SQUASHFS: "s, ## args)
++
++static inline struct squashfs_inode_info *SQUASHFS_I(struct inode *inode)
++{
++	return list_entry(inode, struct squashfs_inode_info, vfs_inode);
++}
++
++#if defined(CONFIG_SQUASHFS_1_0_COMPATIBILITY ) || defined(CONFIG_SQUASHFS_2_0_COMPATIBILITY)
++#define SQSH_EXTERN
++extern unsigned int squashfs_read_data(struct super_block *s, char *buffer,
++				long long index, unsigned int length,
++				long long *next_index);
++extern int squashfs_get_cached_block(struct super_block *s, char *buffer,
++				long long block, unsigned int offset,
++				int length, long long *next_block,
++				unsigned int *next_offset);
++extern void release_cached_fragment(struct squashfs_sb_info *msblk, struct
++					squashfs_fragment_cache *fragment);
++extern struct squashfs_fragment_cache *get_cached_fragment(struct super_block
++					*s, long long start_block,
++					int length);
++extern struct address_space_operations squashfs_symlink_aops;
++extern struct address_space_operations squashfs_aops;
++extern struct address_space_operations squashfs_aops_4K;
++extern struct inode_operations squashfs_dir_inode_ops;
++#else
++#define SQSH_EXTERN static
++#endif
++
++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++extern int squashfs_1_0_supported(struct squashfs_sb_info *msblk);
++#else
++static inline int squashfs_1_0_supported(struct squashfs_sb_info *msblk)
++{
++	return 0;
++}
++#endif
++
++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++extern int squashfs_2_0_supported(struct squashfs_sb_info *msblk);
++#else
++static inline int squashfs_2_0_supported(struct squashfs_sb_info *msblk)
++{
++	return 0;
++}
++#endif
+Index: git/include/linux/squashfs_fs.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/include/linux/squashfs_fs.h	2006-10-31 21:26:45.000000000 +0000
+@@ -0,0 +1,911 @@
++#ifndef SQUASHFS_FS
++#define SQUASHFS_FS
++
++/*
++ * Squashfs
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs_fs.h
++ */
++
++#ifndef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++#define CONFIG_SQUASHFS_2_0_COMPATIBILITY
++#endif
++
++#ifdef	CONFIG_SQUASHFS_VMALLOC
++#define SQUASHFS_ALLOC(a)		vmalloc(a)
++#define SQUASHFS_FREE(a)		vfree(a)
++#else
++#define SQUASHFS_ALLOC(a)		kmalloc(a, GFP_KERNEL)
++#define SQUASHFS_FREE(a)		kfree(a)
++#endif
++#define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE	
++#define SQUASHFS_MAJOR			3
++#define SQUASHFS_MINOR			0
++#define SQUASHFS_MAGIC			0x73717368
++#define SQUASHFS_MAGIC_SWAP		0x68737173
++#define SQUASHFS_START			0
++
++/* size of metadata (inode and directory) blocks */
++#define SQUASHFS_METADATA_SIZE		8192
++#define SQUASHFS_METADATA_LOG		13
++
++/* default size of data blocks */
++#define SQUASHFS_FILE_SIZE		65536
++#define SQUASHFS_FILE_LOG		16
++
++#define SQUASHFS_FILE_MAX_SIZE		65536
++
++/* Max number of uids and gids */
++#define SQUASHFS_UIDS			256
++#define SQUASHFS_GUIDS			255
++
++/* Max length of filename (not 255) */
++#define SQUASHFS_NAME_LEN		256
++
++#define SQUASHFS_INVALID		((long long) 0xffffffffffff)
++#define SQUASHFS_INVALID_FRAG		((unsigned int) 0xffffffff)
++#define SQUASHFS_INVALID_BLK		((long long) -1)
++#define SQUASHFS_USED_BLK		((long long) -2)
++
++/* Filesystem flags */
++#define SQUASHFS_NOI			0
++#define SQUASHFS_NOD			1
++#define SQUASHFS_CHECK			2
++#define SQUASHFS_NOF			3
++#define SQUASHFS_NO_FRAG		4
++#define SQUASHFS_ALWAYS_FRAG		5
++#define SQUASHFS_DUPLICATE		6
++
++#define SQUASHFS_BIT(flag, bit)		((flag >> bit) & 1)
++
++#define SQUASHFS_UNCOMPRESSED_INODES(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_NOI)
++
++#define SQUASHFS_UNCOMPRESSED_DATA(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_NOD)
++
++#define SQUASHFS_UNCOMPRESSED_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_NOF)
++
++#define SQUASHFS_NO_FRAGMENTS(flags)		SQUASHFS_BIT(flags, \
++						SQUASHFS_NO_FRAG)
++
++#define SQUASHFS_ALWAYS_FRAGMENTS(flags)	SQUASHFS_BIT(flags, \
++						SQUASHFS_ALWAYS_FRAG)
++
++#define SQUASHFS_DUPLICATES(flags)		SQUASHFS_BIT(flags, \
++						SQUASHFS_DUPLICATE)
++
++#define SQUASHFS_CHECK_DATA(flags)		SQUASHFS_BIT(flags, \
++						SQUASHFS_CHECK)
++
++#define SQUASHFS_MKFLAGS(noi, nod, check_data, nof, no_frag, always_frag, \
++		duplicate_checking)	(noi | (nod << 1) | (check_data << 2) \
++		| (nof << 3) | (no_frag << 4) | (always_frag << 5) | \
++		(duplicate_checking << 6))
++
++/* Max number of types and file types */
++#define SQUASHFS_DIR_TYPE		1
++#define SQUASHFS_FILE_TYPE		2
++#define SQUASHFS_SYMLINK_TYPE		3
++#define SQUASHFS_BLKDEV_TYPE		4
++#define SQUASHFS_CHRDEV_TYPE		5
++#define SQUASHFS_FIFO_TYPE		6
++#define SQUASHFS_SOCKET_TYPE		7
++#define SQUASHFS_LDIR_TYPE		8
++#define SQUASHFS_LREG_TYPE		9
++
++/* 1.0 filesystem type definitions */
++#define SQUASHFS_TYPES			5
++#define SQUASHFS_IPC_TYPE		0
++
++/* Flag whether block is compressed or uncompressed, bit is set if block is
++ * uncompressed */
++#define SQUASHFS_COMPRESSED_BIT		(1 << 15)
++
++#define SQUASHFS_COMPRESSED_SIZE(B)	(((B) & ~SQUASHFS_COMPRESSED_BIT) ? \
++		(B) & ~SQUASHFS_COMPRESSED_BIT :  SQUASHFS_COMPRESSED_BIT)
++
++#define SQUASHFS_COMPRESSED(B)		(!((B) & SQUASHFS_COMPRESSED_BIT))
++
++#define SQUASHFS_COMPRESSED_BIT_BLOCK		(1 << 24)
++
++#define SQUASHFS_COMPRESSED_SIZE_BLOCK(B)	(((B) & \
++	~SQUASHFS_COMPRESSED_BIT_BLOCK) ? (B) & \
++	~SQUASHFS_COMPRESSED_BIT_BLOCK : SQUASHFS_COMPRESSED_BIT_BLOCK)
++
++#define SQUASHFS_COMPRESSED_BLOCK(B)	(!((B) & SQUASHFS_COMPRESSED_BIT_BLOCK))
++
++/*
++ * Inode number ops.  Inodes consist of a compressed block number, and an
++ * uncompressed  offset within that block
++ */
++#define SQUASHFS_INODE_BLK(a)		((unsigned int) ((a) >> 16))
++
++#define SQUASHFS_INODE_OFFSET(a)	((unsigned int) ((a) & 0xffff))
++
++#define SQUASHFS_MKINODE(A, B)		((squashfs_inode_t)(((squashfs_inode_t) (A)\
++					<< 16) + (B)))
++
++/* Compute 32 bit VFS inode number from squashfs inode number */
++#define SQUASHFS_MK_VFS_INODE(a, b)	((unsigned int) (((a) << 8) + \
++					((b) >> 2) + 1))
++/* XXX */
++
++/* Translate between VFS mode and squashfs mode */
++#define SQUASHFS_MODE(a)		((a) & 0xfff)
++
++/* fragment and fragment table defines */
++#define SQUASHFS_FRAGMENT_BYTES(A)	(A * sizeof(struct squashfs_fragment_entry))
++
++#define SQUASHFS_FRAGMENT_INDEX(A)	(SQUASHFS_FRAGMENT_BYTES(A) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_OFFSET(A)	(SQUASHFS_FRAGMENT_BYTES(A) % \
++						SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEXES(A)	((SQUASHFS_FRAGMENT_BYTES(A) + \
++					SQUASHFS_METADATA_SIZE - 1) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_BYTES(A)	(SQUASHFS_FRAGMENT_INDEXES(A) *\
++						sizeof(long long))
++
++/* cached data constants for filesystem */
++#define SQUASHFS_CACHED_BLKS		8
++
++#define SQUASHFS_MAX_FILE_SIZE_LOG	64
++
++#define SQUASHFS_MAX_FILE_SIZE		((long long) 1 << \
++					(SQUASHFS_MAX_FILE_SIZE_LOG - 2))
++
++#define SQUASHFS_MARKER_BYTE		0xff
++
++/* meta index cache */
++#define SQUASHFS_META_INDEXES	(SQUASHFS_METADATA_SIZE / sizeof(unsigned int))
++#define SQUASHFS_META_ENTRIES	31
++#define SQUASHFS_META_NUMBER	8
++#define SQUASHFS_SLOTS		4
++
++struct meta_entry {
++	long long		data_block;
++	unsigned int		index_block;
++	unsigned short		offset;
++	unsigned short		pad;
++};
++
++struct meta_index {
++	unsigned int		inode_number;
++	unsigned int		offset;
++	unsigned short		entries;
++	unsigned short		skip;
++	unsigned short		locked;
++	unsigned short		pad;
++	struct meta_entry	meta_entry[SQUASHFS_META_ENTRIES];
++};
++
++
++/*
++ * definitions for structures on disk
++ */
++
++typedef long long		squashfs_block_t;
++typedef long long		squashfs_inode_t;
++
++struct squashfs_super_block {
++	unsigned int		s_magic;
++	unsigned int		inodes;
++	unsigned int		bytes_used_2;
++	unsigned int		uid_start_2;
++	unsigned int		guid_start_2;
++	unsigned int		inode_table_start_2;
++	unsigned int		directory_table_start_2;
++	unsigned int		s_major:16;
++	unsigned int		s_minor:16;
++	unsigned int		block_size_1:16;
++	unsigned int		block_log:16;
++	unsigned int		flags:8;
++	unsigned int		no_uids:8;
++	unsigned int		no_guids:8;
++	unsigned int		mkfs_time /* time of filesystem creation */;
++	squashfs_inode_t	root_inode;
++	unsigned int		block_size;
++	unsigned int		fragments;
++	unsigned int		fragment_table_start_2;
++	long long		bytes_used;
++	long long		uid_start;
++	long long		guid_start;
++	long long		inode_table_start;
++	long long		directory_table_start;
++	long long		fragment_table_start;
++	long long		unused;
++} __attribute__ ((packed));
++
++struct squashfs_dir_index {
++	unsigned int		index;
++	unsigned int		start_block;
++	unsigned char		size;
++	unsigned char		name[0];
++} __attribute__ ((packed));
++
++#define SQUASHFS_BASE_INODE_HEADER		\
++	unsigned int		inode_type:4;	\
++	unsigned int		mode:12;	\
++	unsigned int		uid:8;		\
++	unsigned int		guid:8;		\
++	unsigned int		mtime;		\
++	unsigned int 		inode_number;
++
++struct squashfs_base_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++} __attribute__ ((packed));
++
++struct squashfs_ipc_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++} __attribute__ ((packed));
++
++struct squashfs_dev_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned short		rdev;
++} __attribute__ ((packed));
++	
++struct squashfs_symlink_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned short		symlink_size;
++	char			symlink[0];
++} __attribute__ ((packed));
++
++struct squashfs_reg_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	squashfs_block_t	start_block;
++	unsigned int		fragment;
++	unsigned int		offset;
++	unsigned int		file_size;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_lreg_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	squashfs_block_t	start_block;
++	unsigned int		fragment;
++	unsigned int		offset;
++	long long		file_size;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned int		file_size:19;
++	unsigned int		offset:13;
++	unsigned int		start_block;
++	unsigned int		parent_inode;
++} __attribute__  ((packed));
++
++struct squashfs_ldir_inode_header {
++	SQUASHFS_BASE_INODE_HEADER;
++	unsigned int		nlink;
++	unsigned int		file_size:27;
++	unsigned int		offset:13;
++	unsigned int		start_block;
++	unsigned int		i_count:16;
++	unsigned int		parent_inode;
++	struct squashfs_dir_index	index[0];
++} __attribute__  ((packed));
++
++union squashfs_inode_header {
++	struct squashfs_base_inode_header	base;
++	struct squashfs_dev_inode_header	dev;
++	struct squashfs_symlink_inode_header	symlink;
++	struct squashfs_reg_inode_header	reg;
++	struct squashfs_lreg_inode_header	lreg;
++	struct squashfs_dir_inode_header	dir;
++	struct squashfs_ldir_inode_header	ldir;
++	struct squashfs_ipc_inode_header	ipc;
++};
++	
++struct squashfs_dir_entry {
++	unsigned int		offset:13;
++	unsigned int		type:3;
++	unsigned int		size:8;
++	int			inode_number:16;
++	char			name[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_header {
++	unsigned int		count:8;
++	unsigned int		start_block;
++	unsigned int		inode_number;
++} __attribute__ ((packed));
++
++struct squashfs_fragment_entry {
++	long long		start_block;
++	unsigned int		size;
++	unsigned int		unused;
++} __attribute__ ((packed));
++
++extern int squashfs_uncompress_block(void *d, int dstlen, void *s, int srclen);
++extern int squashfs_uncompress_init(void);
++extern int squashfs_uncompress_exit(void);
++
++/*
++ * macros to convert each packed bitfield structure from little endian to big
++ * endian and vice versa.  These are needed when creating or using a filesystem
++ * on a machine with different byte ordering to the target architecture.
++ *
++ */
++
++#define SQUASHFS_SWAP_START \
++	int bits;\
++	int b_pos;\
++	unsigned long long val;\
++	unsigned char *s;\
++	unsigned char *d;
++
++#define SQUASHFS_SWAP_SUPER_BLOCK(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_super_block));\
++	SQUASHFS_SWAP((s)->s_magic, d, 0, 32);\
++	SQUASHFS_SWAP((s)->inodes, d, 32, 32);\
++	SQUASHFS_SWAP((s)->bytes_used_2, d, 64, 32);\
++	SQUASHFS_SWAP((s)->uid_start_2, d, 96, 32);\
++	SQUASHFS_SWAP((s)->guid_start_2, d, 128, 32);\
++	SQUASHFS_SWAP((s)->inode_table_start_2, d, 160, 32);\
++	SQUASHFS_SWAP((s)->directory_table_start_2, d, 192, 32);\
++	SQUASHFS_SWAP((s)->s_major, d, 224, 16);\
++	SQUASHFS_SWAP((s)->s_minor, d, 240, 16);\
++	SQUASHFS_SWAP((s)->block_size_1, d, 256, 16);\
++	SQUASHFS_SWAP((s)->block_log, d, 272, 16);\
++	SQUASHFS_SWAP((s)->flags, d, 288, 8);\
++	SQUASHFS_SWAP((s)->no_uids, d, 296, 8);\
++	SQUASHFS_SWAP((s)->no_guids, d, 304, 8);\
++	SQUASHFS_SWAP((s)->mkfs_time, d, 312, 32);\
++	SQUASHFS_SWAP((s)->root_inode, d, 344, 64);\
++	SQUASHFS_SWAP((s)->block_size, d, 408, 32);\
++	SQUASHFS_SWAP((s)->fragments, d, 440, 32);\
++	SQUASHFS_SWAP((s)->fragment_table_start_2, d, 472, 32);\
++	SQUASHFS_SWAP((s)->bytes_used, d, 504, 64);\
++	SQUASHFS_SWAP((s)->uid_start, d, 568, 64);\
++	SQUASHFS_SWAP((s)->guid_start, d, 632, 64);\
++	SQUASHFS_SWAP((s)->inode_table_start, d, 696, 64);\
++	SQUASHFS_SWAP((s)->directory_table_start, d, 760, 64);\
++	SQUASHFS_SWAP((s)->fragment_table_start, d, 824, 64);\
++	SQUASHFS_SWAP((s)->unused, d, 888, 64);\
++}
++
++#define SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
++	SQUASHFS_MEMSET(s, d, n);\
++	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
++	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
++	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
++	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
++	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
++	SQUASHFS_SWAP((s)->inode_number, d, 64, 32);
++
++#define SQUASHFS_SWAP_BASE_INODE_HEADER(s, d, n) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, n)\
++}
++
++#define SQUASHFS_SWAP_IPC_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_ipc_inode_header))\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++}
++
++#define SQUASHFS_SWAP_DEV_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_dev_inode_header)); \
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->rdev, d, 128, 16);\
++}
++
++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_symlink_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->symlink_size, d, 128, 16);\
++}
++
++#define SQUASHFS_SWAP_REG_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_reg_inode_header));\
++	SQUASHFS_SWAP((s)->start_block, d, 96, 64);\
++	SQUASHFS_SWAP((s)->fragment, d, 160, 32);\
++	SQUASHFS_SWAP((s)->offset, d, 192, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 224, 32);\
++}
++
++#define SQUASHFS_SWAP_LREG_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_lreg_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 128, 64);\
++	SQUASHFS_SWAP((s)->fragment, d, 192, 32);\
++	SQUASHFS_SWAP((s)->offset, d, 224, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 256, 64);\
++}
++
++#define SQUASHFS_SWAP_DIR_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_dir_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 128, 19);\
++	SQUASHFS_SWAP((s)->offset, d, 147, 13);\
++	SQUASHFS_SWAP((s)->start_block, d, 160, 32);\
++	SQUASHFS_SWAP((s)->parent_inode, d, 192, 32);\
++}
++
++#define SQUASHFS_SWAP_LDIR_INODE_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE(s, d, \
++			sizeof(struct squashfs_ldir_inode_header));\
++	SQUASHFS_SWAP((s)->nlink, d, 96, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 128, 27);\
++	SQUASHFS_SWAP((s)->offset, d, 155, 13);\
++	SQUASHFS_SWAP((s)->start_block, d, 168, 32);\
++	SQUASHFS_SWAP((s)->i_count, d, 200, 16);\
++	SQUASHFS_SWAP((s)->parent_inode, d, 216, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_INDEX(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index));\
++	SQUASHFS_SWAP((s)->index, d, 0, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 32, 32);\
++	SQUASHFS_SWAP((s)->size, d, 64, 8);\
++}
++
++#define SQUASHFS_SWAP_DIR_HEADER(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header));\
++	SQUASHFS_SWAP((s)->count, d, 0, 8);\
++	SQUASHFS_SWAP((s)->start_block, d, 8, 32);\
++	SQUASHFS_SWAP((s)->inode_number, d, 40, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_ENTRY(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry));\
++	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
++	SQUASHFS_SWAP((s)->type, d, 13, 3);\
++	SQUASHFS_SWAP((s)->size, d, 16, 8);\
++	SQUASHFS_SWAP((s)->inode_number, d, 24, 16);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_ENTRY(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry));\
++	SQUASHFS_SWAP((s)->start_block, d, 0, 64);\
++	SQUASHFS_SWAP((s)->size, d, 64, 32);\
++}
++
++#define SQUASHFS_SWAP_SHORTS(s, d, n) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * 2);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			16)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, 16);\
++}
++
++#define SQUASHFS_SWAP_INTS(s, d, n) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * 4);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			32)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, 32);\
++}
++
++#define SQUASHFS_SWAP_LONG_LONGS(s, d, n) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * 8);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			64)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, 64);\
++}
++
++#define SQUASHFS_SWAP_DATA(s, d, n, bits) {\
++	int entry;\
++	int bit_position;\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, n * bits / 8);\
++	for(entry = 0, bit_position = 0; entry < n; entry++, bit_position += \
++			bits)\
++		SQUASHFS_SWAP(s[entry], d, bit_position, bits);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_INDEXES(s, d, n) SQUASHFS_SWAP_LONG_LONGS(s, d, n)
++
++#ifdef CONFIG_SQUASHFS_1_0_COMPATIBILITY
++
++struct squashfs_base_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++} __attribute__ ((packed));
++
++struct squashfs_ipc_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned int		type:4;
++	unsigned int		offset:4;
++} __attribute__ ((packed));
++
++struct squashfs_dev_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned short		rdev;
++} __attribute__ ((packed));
++	
++struct squashfs_symlink_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned short		symlink_size;
++	char			symlink[0];
++} __attribute__ ((packed));
++
++struct squashfs_reg_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned int		mtime;
++	unsigned int		start_block;
++	unsigned int		file_size:32;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_inode_header_1 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:4; /* index into uid table */
++	unsigned int		guid:4; /* index into guid table */
++	unsigned int		file_size:19;
++	unsigned int		offset:13;
++	unsigned int		mtime;
++	unsigned int		start_block:24;
++} __attribute__  ((packed));
++
++#define SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n) \
++	SQUASHFS_MEMSET(s, d, n);\
++	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
++	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
++	SQUASHFS_SWAP((s)->uid, d, 16, 4);\
++	SQUASHFS_SWAP((s)->guid, d, 20, 4);
++
++#define SQUASHFS_SWAP_BASE_INODE_HEADER_1(s, d, n) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, n)\
++}
++
++#define SQUASHFS_SWAP_IPC_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_ipc_inode_header_1));\
++	SQUASHFS_SWAP((s)->type, d, 24, 4);\
++	SQUASHFS_SWAP((s)->offset, d, 28, 4);\
++}
++
++#define SQUASHFS_SWAP_DEV_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_dev_inode_header_1));\
++	SQUASHFS_SWAP((s)->rdev, d, 24, 16);\
++}
++
++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_symlink_inode_header_1));\
++	SQUASHFS_SWAP((s)->symlink_size, d, 24, 16);\
++}
++
++#define SQUASHFS_SWAP_REG_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_reg_inode_header_1));\
++	SQUASHFS_SWAP((s)->mtime, d, 24, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 56, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 88, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_INODE_HEADER_1(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_1(s, d, \
++			sizeof(struct squashfs_dir_inode_header_1));\
++	SQUASHFS_SWAP((s)->file_size, d, 24, 19);\
++	SQUASHFS_SWAP((s)->offset, d, 43, 13);\
++	SQUASHFS_SWAP((s)->mtime, d, 56, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 88, 24);\
++}
++
++#endif
++
++#ifdef CONFIG_SQUASHFS_2_0_COMPATIBILITY
++
++struct squashfs_dir_index_2 {
++	unsigned int		index:27;
++	unsigned int		start_block:29;
++	unsigned char		size;
++	unsigned char		name[0];
++} __attribute__ ((packed));
++
++struct squashfs_base_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++} __attribute__ ((packed));
++
++struct squashfs_ipc_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++} __attribute__ ((packed));
++
++struct squashfs_dev_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned short		rdev;
++} __attribute__ ((packed));
++	
++struct squashfs_symlink_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned short		symlink_size;
++	char			symlink[0];
++} __attribute__ ((packed));
++
++struct squashfs_reg_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned int		mtime;
++	unsigned int		start_block;
++	unsigned int		fragment;
++	unsigned int		offset;
++	unsigned int		file_size:32;
++	unsigned short		block_list[0];
++} __attribute__ ((packed));
++
++struct squashfs_dir_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned int		file_size:19;
++	unsigned int		offset:13;
++	unsigned int		mtime;
++	unsigned int		start_block:24;
++} __attribute__  ((packed));
++
++struct squashfs_ldir_inode_header_2 {
++	unsigned int		inode_type:4;
++	unsigned int		mode:12; /* protection */
++	unsigned int		uid:8; /* index into uid table */
++	unsigned int		guid:8; /* index into guid table */
++	unsigned int		file_size:27;
++	unsigned int		offset:13;
++	unsigned int		mtime;
++	unsigned int		start_block:24;
++	unsigned int		i_count:16;
++	struct squashfs_dir_index_2	index[0];
++} __attribute__  ((packed));
++
++union squashfs_inode_header_2 {
++	struct squashfs_base_inode_header_2	base;
++	struct squashfs_dev_inode_header_2	dev;
++	struct squashfs_symlink_inode_header_2	symlink;
++	struct squashfs_reg_inode_header_2	reg;
++	struct squashfs_dir_inode_header_2	dir;
++	struct squashfs_ldir_inode_header_2	ldir;
++	struct squashfs_ipc_inode_header_2	ipc;
++};
++	
++struct squashfs_dir_header_2 {
++	unsigned int		count:8;
++	unsigned int		start_block:24;
++} __attribute__ ((packed));
++
++struct squashfs_dir_entry_2 {
++	unsigned int		offset:13;
++	unsigned int		type:3;
++	unsigned int		size:8;
++	char			name[0];
++} __attribute__ ((packed));
++
++struct squashfs_fragment_entry_2 {
++	unsigned int		start_block;
++	unsigned int		size;
++} __attribute__ ((packed));
++
++#define SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
++	SQUASHFS_MEMSET(s, d, n);\
++	SQUASHFS_SWAP((s)->inode_type, d, 0, 4);\
++	SQUASHFS_SWAP((s)->mode, d, 4, 12);\
++	SQUASHFS_SWAP((s)->uid, d, 16, 8);\
++	SQUASHFS_SWAP((s)->guid, d, 24, 8);\
++
++#define SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, n) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, n)\
++}
++
++#define SQUASHFS_SWAP_IPC_INODE_HEADER_2(s, d) \
++	SQUASHFS_SWAP_BASE_INODE_HEADER_2(s, d, sizeof(struct squashfs_ipc_inode_header_2))
++
++#define SQUASHFS_SWAP_DEV_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_dev_inode_header_2)); \
++	SQUASHFS_SWAP((s)->rdev, d, 32, 16);\
++}
++
++#define SQUASHFS_SWAP_SYMLINK_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_symlink_inode_header_2));\
++	SQUASHFS_SWAP((s)->symlink_size, d, 32, 16);\
++}
++
++#define SQUASHFS_SWAP_REG_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_reg_inode_header_2));\
++	SQUASHFS_SWAP((s)->mtime, d, 32, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 64, 32);\
++	SQUASHFS_SWAP((s)->fragment, d, 96, 32);\
++	SQUASHFS_SWAP((s)->offset, d, 128, 32);\
++	SQUASHFS_SWAP((s)->file_size, d, 160, 32);\
++}
++
++#define SQUASHFS_SWAP_DIR_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_dir_inode_header_2));\
++	SQUASHFS_SWAP((s)->file_size, d, 32, 19);\
++	SQUASHFS_SWAP((s)->offset, d, 51, 13);\
++	SQUASHFS_SWAP((s)->mtime, d, 64, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 96, 24);\
++}
++
++#define SQUASHFS_SWAP_LDIR_INODE_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_SWAP_BASE_INODE_CORE_2(s, d, \
++			sizeof(struct squashfs_ldir_inode_header_2));\
++	SQUASHFS_SWAP((s)->file_size, d, 32, 27);\
++	SQUASHFS_SWAP((s)->offset, d, 59, 13);\
++	SQUASHFS_SWAP((s)->mtime, d, 72, 32);\
++	SQUASHFS_SWAP((s)->start_block, d, 104, 24);\
++	SQUASHFS_SWAP((s)->i_count, d, 128, 16);\
++}
++
++#define SQUASHFS_SWAP_DIR_INDEX_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_index_2));\
++	SQUASHFS_SWAP((s)->index, d, 0, 27);\
++	SQUASHFS_SWAP((s)->start_block, d, 27, 29);\
++	SQUASHFS_SWAP((s)->size, d, 56, 8);\
++}
++#define SQUASHFS_SWAP_DIR_HEADER_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_header_2));\
++	SQUASHFS_SWAP((s)->count, d, 0, 8);\
++	SQUASHFS_SWAP((s)->start_block, d, 8, 24);\
++}
++
++#define SQUASHFS_SWAP_DIR_ENTRY_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_dir_entry_2));\
++	SQUASHFS_SWAP((s)->offset, d, 0, 13);\
++	SQUASHFS_SWAP((s)->type, d, 13, 3);\
++	SQUASHFS_SWAP((s)->size, d, 16, 8);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_ENTRY_2(s, d) {\
++	SQUASHFS_SWAP_START\
++	SQUASHFS_MEMSET(s, d, sizeof(struct squashfs_fragment_entry_2));\
++	SQUASHFS_SWAP((s)->start_block, d, 0, 32);\
++	SQUASHFS_SWAP((s)->size, d, 32, 32);\
++}
++
++#define SQUASHFS_SWAP_FRAGMENT_INDEXES_2(s, d, n) SQUASHFS_SWAP_INTS(s, d, n)
++
++/* fragment and fragment table defines */
++#define SQUASHFS_FRAGMENT_BYTES_2(A)	(A * sizeof(struct squashfs_fragment_entry_2))
++
++#define SQUASHFS_FRAGMENT_INDEX_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_OFFSET_2(A)	(SQUASHFS_FRAGMENT_BYTES_2(A) % \
++						SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEXES_2(A)	((SQUASHFS_FRAGMENT_BYTES_2(A) + \
++					SQUASHFS_METADATA_SIZE - 1) / \
++					SQUASHFS_METADATA_SIZE)
++
++#define SQUASHFS_FRAGMENT_INDEX_BYTES_2(A)	(SQUASHFS_FRAGMENT_INDEXES_2(A) *\
++						sizeof(int))
++
++#endif
++
++#ifdef __KERNEL__
++
++/*
++ * macros used to swap each structure entry, taking into account
++ * bitfields and different bitfield placing conventions on differing
++ * architectures
++ */
++
++#include <asm/byteorder.h>
++
++#ifdef __BIG_ENDIAN
++	/* convert from little endian to big endian */
++#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
++		tbits, b_pos)
++#else
++	/* convert from big endian to little endian */ 
++#define SQUASHFS_SWAP(value, p, pos, tbits) _SQUASHFS_SWAP(value, p, pos, \
++		tbits, 64 - tbits - b_pos)
++#endif
++
++#define _SQUASHFS_SWAP(value, p, pos, tbits, SHIFT) {\
++	b_pos = pos % 8;\
++	val = 0;\
++	s = (unsigned char *)p + (pos / 8);\
++	d = ((unsigned char *) &val) + 7;\
++	for(bits = 0; bits < (tbits + b_pos); bits += 8) \
++		*d-- = *s++;\
++	value = (val >> (SHIFT))/* & ((1 << tbits) - 1)*/;\
++}
++
++#define SQUASHFS_MEMSET(s, d, n)	memset(s, 0, n);
++
++#endif
++#endif
+Index: git/include/linux/squashfs_fs_i.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/include/linux/squashfs_fs_i.h	2006-10-31 21:26:45.000000000 +0000
+@@ -0,0 +1,45 @@
++#ifndef SQUASHFS_FS_I
++#define SQUASHFS_FS_I
++/*
++ * Squashfs
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs_fs_i.h
++ */
++
++struct squashfs_inode_info {
++	long long	start_block;
++	unsigned int	offset;
++	union {
++		struct {
++			long long	fragment_start_block;
++			unsigned int	fragment_size;
++			unsigned int	fragment_offset;
++			long long	block_list_start;
++		} s1;
++		struct {
++			long long	directory_index_start;
++			unsigned int	directory_index_offset;
++			unsigned int	directory_index_count;
++			unsigned int	parent_inode;
++		} s2;
++	} u;
++	struct inode	vfs_inode;
++};
++#endif
+Index: git/include/linux/squashfs_fs_sb.h
+===================================================================
+--- /dev/null	1970-01-01 00:00:00.000000000 +0000
++++ git/include/linux/squashfs_fs_sb.h	2006-10-31 21:26:45.000000000 +0000
+@@ -0,0 +1,74 @@
++#ifndef SQUASHFS_FS_SB
++#define SQUASHFS_FS_SB
++/*
++ * Squashfs
++ *
++ * Copyright (c) 2002, 2003, 2004, 2005, 2006
++ * Phillip Lougher <phillip@lougher.org.uk>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version 2,
++ * or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++ *
++ * squashfs_fs_sb.h
++ */
++
++#include <linux/squashfs_fs.h>
++
++struct squashfs_cache {
++	long long	block;
++	int		length;
++	long long	next_index;
++	char		*data;
++};
++
++struct squashfs_fragment_cache {
++	long long	block;
++	int		length;
++	unsigned int	locked;
++	char		*data;
++};
++
++struct squashfs_sb_info {
++	struct squashfs_super_block	sblk;
++	int			devblksize;
++	int			devblksize_log2;
++	int			swap;
++	struct squashfs_cache	*block_cache;
++	struct squashfs_fragment_cache	*fragment;
++	int			next_cache;
++	int			next_fragment;
++	int			next_meta_index;
++	unsigned int		*uid;
++	unsigned int		*guid;
++	long long		*fragment_index;
++	unsigned int		*fragment_index_2;
++	unsigned int		read_size;
++	char			*read_data;
++	char			*read_page;
++	struct semaphore	read_data_mutex;
++	struct semaphore	read_page_mutex;
++	struct semaphore	block_cache_mutex;
++	struct semaphore	fragment_mutex;
++	struct semaphore	meta_index_mutex;
++	wait_queue_head_t	waitq;
++	wait_queue_head_t	fragment_wait_queue;
++	struct meta_index	*meta_index;
++	struct inode		*(*iget)(struct super_block *s,  squashfs_inode_t \
++				inode);
++	long long		(*read_blocklist)(struct inode *inode, int \
++				index, int readahead_blks, char *block_list, \
++				unsigned short **block_p, unsigned int *bsize);
++	int			(*read_fragment_index_table)(struct super_block *s);
++};
++#endif
+Index: git/init/do_mounts_rd.c
+===================================================================
+--- git.orig/init/do_mounts_rd.c	2006-10-31 16:09:47.000000000 +0000
++++ git/init/do_mounts_rd.c	2006-10-31 21:26:45.000000000 +0000
+@@ -5,6 +5,7 @@
+ #include <linux/ext2_fs.h>
+ #include <linux/romfs_fs.h>
+ #include <linux/cramfs_fs.h>
++#include <linux/squashfs_fs.h>
+ #include <linux/initrd.h>
+ #include <linux/string.h>
+ 
+@@ -39,6 +40,7 @@ static int __init crd_load(int in_fd, in
+  * numbers could not be found.
+  *
+  * We currently check for the following magic numbers:
++ *      squashfs
+  * 	minix
+  * 	ext2
+  *	romfs
+@@ -53,6 +55,7 @@ identify_ramdisk_image(int fd, int start
+ 	struct ext2_super_block *ext2sb;
+ 	struct romfs_super_block *romfsb;
+ 	struct cramfs_super *cramfsb;
++	struct squashfs_super_block *squashfsb;
+ 	int nblocks = -1;
+ 	unsigned char *buf;
+ 
+@@ -64,6 +67,7 @@ identify_ramdisk_image(int fd, int start
+ 	ext2sb = (struct ext2_super_block *) buf;
+ 	romfsb = (struct romfs_super_block *) buf;
+ 	cramfsb = (struct cramfs_super *) buf;
++	squashfsb = (struct squashfs_super_block *) buf;
+ 	memset(buf, 0xe5, size);
+ 
+ 	/*
+@@ -101,6 +105,15 @@ identify_ramdisk_image(int fd, int start
+ 		goto done;
+ 	}
+ 
++	/* squashfs is at block zero too */
++	if (squashfsb->s_magic == SQUASHFS_MAGIC) {
++		printk(KERN_NOTICE
++		       "RAMDISK: squashfs filesystem found at block %d\n",
++		       start_block);
++		nblocks = (squashfsb->bytes_used+BLOCK_SIZE-1)>>BLOCK_SIZE_BITS;
++		goto done;
++	}
++
+ 	/*
+ 	 * Read block 1 to test for minix and ext2 superblock
+ 	 */
diff --git a/packages/linux/linux-rp-2.6.21/vesafb-tng-1.0-rc2-2.6.20-rc2.patch b/packages/linux/linux-rp-2.6.21/vesafb-tng-1.0-rc2-2.6.20-rc2.patch
new file mode 100644
index 0000000000..b1b0fc3549
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/vesafb-tng-1.0-rc2-2.6.20-rc2.patch
@@ -0,0 +1,3141 @@
+diff --git a/Documentation/fb/vesafb.txt b/Documentation/fb/vesafb.txt
+index ee277dd..93d6e6e 100644
+--- a/Documentation/fb/vesafb.txt
++++ b/Documentation/fb/vesafb.txt
+@@ -2,16 +2,18 @@
+ What is vesafb?
+ ===============
+ 
+-This is a generic driver for a graphic framebuffer on intel boxes.
++Vesafb is a generic framebuffer driver for x86 and x86_64 boxes.
+ 
+-The idea is simple:  Turn on graphics mode at boot time with the help
+-of the BIOS, and use this as framebuffer device /dev/fb0, like the m68k
+-(and other) ports do.
++VESA BIOS Extensions Version 2.0 are required, because we need access to
++a linear frame buffer. VBE 3.0 is required if you want to use modes with a
++higher (than the standard 60 Hz) refresh rate.
+ 
+-This means we decide at boot time whenever we want to run in text or
+-graphics mode.  Switching mode later on (in protected mode) is
+-impossible; BIOS calls work in real mode only.  VESA BIOS Extensions
+-Version 2.0 are required, because we need a linear frame buffer.
++The VESA framebuffer driver comes in two flavors - the standard 'vesafb'
++and 'vesafb-tng'. Vesafb-tng is available only on 32-bit x86 due to the
++technology it uses (vm86). Vesafb-tng has more features than vesafb
++(adjusting the refresh rate on VBE 3.0 compliant boards, switching the
++video mode without rebooting, selecting a mode by providing its
++modedb name, and more).
+ 
+ Advantages:
+ 
+@@ -29,26 +31,35 @@ Disadvantages:
+ How to use it?
+ ==============
+ 
+-Switching modes is done using the vga=... boot parameter.  Read
+-Documentation/svga.txt for details.
++If you are running a 32-bit x86 system and you decide to use vesafb-tng,
++you can either compile the driver into the kernel or use it as a module.
++The graphics mode you want to use is in both cases specified using the
++standard modedb format.
+ 
+-You should compile in both vgacon (for text mode) and vesafb (for
+-graphics mode). Which of them takes over the console depends on
+-whenever the specified mode is text or graphics.
++If your system doesn't support vm86 calls, things get a little more tricky.
++Since on such systems you can't do BIOS calls from protected mode in which
++kernel runs, you have to decide at boot time whenever you want to run in text
++or in graphics mode. Switching mode later on is impossible. Switching modes
++is done using the vga=... boot parameter.  Read Documentation/svga.txt for
++details. Below is a more detailed description of what to do on systems using
++the standard vesafb driver.
+ 
+-The graphic modes are NOT in the list which you get if you boot with
+-vga=ask and hit return. The mode you wish to use is derived from the
+-VESA mode number. Here are those VESA mode numbers:
++You should compile in both vgacon (for text mode) and vesafb (for graphics
++mode). Which of them takes over the console depends on whenever the
++specified mode is text or graphics.
++
++The graphic modes are NOT in the list which you get if you boot with vga=ask
++and hit return. The mode you wish to use is derived from the VESA mode number.
++Here are those VESA mode numbers:
+ 
+     | 640x480  800x600  1024x768 1280x1024
+ ----+-------------------------------------
+-256 |  0x101    0x103    0x105    0x107   
+-32k |  0x110    0x113    0x116    0x119   
+-64k |  0x111    0x114    0x117    0x11A   
+-16M |  0x112    0x115    0x118    0x11B   
++256 |  0x101    0x103    0x105    0x107
++32k |  0x110    0x113    0x116    0x119
++64k |  0x111    0x114    0x117    0x11A
++16M |  0x112    0x115    0x118    0x11B
+ 
+-The video mode number of the Linux kernel is the VESA mode number plus
+-0x200.
++The video mode number of the Linux kernel is the VESA mode number plus 0x200.
+  
+  Linux_kernel_mode_number = VESA_mode_number + 0x200
+ 
+@@ -56,15 +67,15 @@ So the table for the Kernel mode numbers are:
+ 
+     | 640x480  800x600  1024x768 1280x1024
+ ----+-------------------------------------
+-256 |  0x301    0x303    0x305    0x307   
+-32k |  0x310    0x313    0x316    0x319   
+-64k |  0x311    0x314    0x317    0x31A   
+-16M |  0x312    0x315    0x318    0x31B   
++256 |  0x301    0x303    0x305    0x307
++32k |  0x310    0x313    0x316    0x319
++64k |  0x311    0x314    0x317    0x31A
++16M |  0x312    0x315    0x318    0x31B
+ 
+-To enable one of those modes you have to specify "vga=ask" in the
+-lilo.conf file and rerun LILO. Then you can type in the desired
+-mode at the "vga=ask" prompt. For example if you like to use 
+-1024x768x256 colors you have to say "305" at this prompt.
++To enable one of those modes you have to specify "vga=ask" in the lilo.conf
++file and rerun LILO. Then you can type in the desired mode at the "vga=ask"
++prompt. For example if you like to use 1024x768x256 colors you have to say
++"305" at this prompt.
+ 
+ If this does not work, this might be because your BIOS does not support
+ linear framebuffers or because it does not support this mode at all.
+@@ -72,11 +83,12 @@ Even if your board does, it might be the BIOS which does not.  VESA BIOS
+ Extensions v2.0 are required, 1.2 is NOT sufficient.  You will get a
+ "bad mode number" message if something goes wrong.
+ 
+-1. Note: LILO cannot handle hex, for booting directly with 
++1. Note: LILO cannot handle hex, for booting directly with
+          "vga=mode-number" you have to transform the numbers to decimal.
+ 2. Note: Some newer versions of LILO appear to work with those hex values,
+          if you set the 0x in front of the numbers.
+ 
++
+ X11
+ ===
+ 
+@@ -84,98 +96,164 @@ XF68_FBDev should work just fine, but it is non-accelerated.  Running
+ another (accelerated) X-Server like XF86_SVGA might or might not work.
+ It depends on X-Server and graphics board.
+ 
+-The X-Server must restore the video mode correctly, else you end up
++The X-Server must restore the video mode correctly, or else you end up
+ with a broken console (and vesafb cannot do anything about this).
++With vesafb-tng chances are that the console will be restored properly
++even if the X server messes up the video mode.
+ 
+ 
+ Refresh rates
+ =============
+ 
+-There is no way to change the vesafb video mode and/or timings after
+-booting linux.  If you are not happy with the 60 Hz refresh rate, you
+-have these options:
++With VBE 3.0 compatible BIOSes and vesafb-tng it is possible to change
++the refresh rate either at boot time (by specifying the @<rr> part of
++the mode name) or later, using the fbset utility.
++
++If you want to use the default BIOS refresh rate while switching modes
++on a running system, set pixclock to 0.
+ 
+- * configure and load the DOS-Tools for your the graphics board (if
+-   available) and boot linux with loadlin.
+- * use a native driver (matroxfb/atyfb) instead if vesafb.  If none
++With VBE 2.0 there is no way to change the mode timings after booting
++Linux. If you are not happy with the 60 Hz refresh rate, you have
++the following options:
++
++ * Configure and load the DOS tools for your the graphics board (if
++   available) and boot Linux with loadlin.
++ * Use a native driver (matroxfb/atyfb) instead of vesafb.  If none
+    is available, write a new one!
+- * VBE 3.0 might work too.  I have neither a gfx board with VBE 3.0
+-   support nor the specs, so I have not checked this yet.
++ * Use a BIOS editor to change the default refresh rate (such an
++   editor does exist at least for ATI Radeon BIOSes).
++ * If you're running a non-vm86 and VBE 3.0 compatible system, you can
++   use a kernel patch (vesafb-rrc) to hard-code some mode timings in
++   the kernel and use these while setting the video mode at boot time.
++
++Note that there are some boards (nVidia 59**, 57** and newer models)
++claiming that their Video BIOS is VBE 3.0 compliant, while ignoring the
++CRTC values provided by software such as vesafb-tng. You'll not be able
++to adjust the refresh rate if you're using one of these boards.
+ 
+ 
+ Configuration
+ =============
+ 
+-The VESA BIOS provides protected mode interface for changing
+-some parameters.  vesafb can use it for palette changes and
+-to pan the display.  It is turned off by default because it
+-seems not to work with some BIOS versions, but there are options
+-to turn it on.
+-
+-You can pass options to vesafb using "video=vesafb:option" on
+-the kernel command line.  Multiple options should be separated
+-by comma, like this: "video=vesafb:ypan,invers"
+-
+-Accepted options:
+-
+-invers	no comment...
+-
+-ypan	enable display panning using the VESA protected mode 
+-	interface.  The visible screen is just a window of the
+-	video memory, console scrolling is done by changing the
+-	start of the window.
+-	pro:	* scrolling (fullscreen) is fast, because there is
+-		  no need to copy around data.
+-		* You'll get scrollback (the Shift-PgUp thing),
+-		  the video memory can be used as scrollback buffer
+-	kontra: * scrolling only parts of the screen causes some
+-		  ugly flicker effects (boot logo flickers for
+-		  example).
+-
+-ywrap	Same as ypan, but assumes your gfx board can wrap-around 
+-	the video memory (i.e. starts reading from top if it
+-	reaches the end of video memory).  Faster than ypan.
+-
+-redraw	scroll by redrawing the affected part of the screen, this
+-	is the safe (and slow) default.
+-
+-
+-vgapal	Use the standard vga registers for palette changes.
+-	This is the default.
+-pmipal	Use the protected mode interface for palette changes.
+-
+-mtrr:n	setup memory type range registers for the vesafb framebuffer
+-	where n:
+-	      0 - disabled (equivalent to nomtrr) (default)
+-	      1 - uncachable
+-	      2 - write-back
+-	      3 - write-combining
+-	      4 - write-through
+-
+-	If you see the following in dmesg, choose the type that matches the
+-	old one. In this example, use "mtrr:2".
++The VESA BIOS provides protected mode interface for changing some parameters.
++vesafb can use it for palette changes and to pan the display. It is turned
++off by default because it seems not to work with some BIOS versions, but
++there are options to turn it on.
++
++You can pass options to vesafb using "video=vesafb:option" on the kernel
++command line. Multiple options should be separated by a comma, like this:
++"video=vesafb:ypan,1024x768-32@85"
++
++Note that vesafb-tng still uses the "video=vesafb:option" format of the
++kernel command line video parameter. "video=vesafb-tng:xxx" is incorrect.
++
++Accepted options (both vesafb and vesafb-tng):
++
++ypan    Enable display panning using the VESA protected mode interface
++        The visible screen is just a window of the video memory,
++        console scrolling is done by changing the start of the window.
++        pro:    * scrolling (fullscreen) is fast, because there is
++                  no need to copy around data.
++                * you'll get scrollback (the Shift-PgUp thing),
++                  the video memory can be used as scrollback buffer
++        con:    * scrolling only parts of the screen causes some
++                  ugly flicker effects (boot logo flickers for
++                  example).
++
++ywrap   Same as ypan, but assumes your gfx board can wrap-around the video
++        memory (i.e. starts reading from top if it reaches the end of
++        video memory). Faster than ypan.
++
++redraw  Scroll by redrawing the affected part of the screen, this is the
++        safe (and slow) default.
++
++vgapal  Use the standard VGA registers for palette changes.
++
++pmipal  Use the protected mode interface for palette changes.
++        This is the default is the protected mode interface is available.
++
++mtrr:n  Setup memory type range registers for the vesafb framebuffer
++        where n:
++              0 - disabled (equivalent to nomtrr) (default)
++              1 - uncachable
++              2 - write-back
++              3 - write-combining
++              4 - write-through
++
++        If you see the following in dmesg, choose the type that matches
++        the old one. In this example, use "mtrr:2".
+ ...
+ mtrr: type mismatch for e0000000,8000000 old: write-back new: write-combining
+ ...
+ 
+-nomtrr  disable mtrr
++nomtrr  Do not use memory type range registers for vesafb.
+ 
+ vremap:n
+         remap 'n' MiB of video RAM. If 0 or not specified, remap memory
+-	according to video mode. (2.5.66 patch/idea by Antonino Daplas
+-	reversed to give override possibility (allocate more fb memory
+-	than the kernel would) to 2.4 by tmb@iki.fi)
++        according to video mode. (2.5.66 patch/idea by Antonino Daplas
++        reversed to give override possibility (allocate more fb memory
++        than the kernel would) to 2.4 by tmb@iki.fi)
+ 
+ vtotal:n
+         if the video BIOS of your card incorrectly determines the total
+         amount of video RAM, use this option to override the BIOS (in MiB).
+ 
+-Have fun!
++Options accepted only by vesafb-tng:
++
++<mode>  The mode you want to set, in the standard modedb format. Refer to
++        modedb.txt for a detailed description. If you specify a mode that is
++        not supported by your board's BIOS, vesafb-tng will attempt to set a
++        similar mode. The list of supported modes can be found in
++        /proc/fbx/modes, where x is the framebuffer number (usually 0).
++        When vesafb-tng is compiled as a module, the mode string should be
++        provided as a value of the parameter 'mode'.
++
++vbemode:x
++        Force the use of VBE mode x. The mode will only be set if it's
++        found in the VBE-provided list of supported modes.
++        NOTE: The mode number 'x' should be specified in VESA mode number
++        notation, not the Linux kernel one (eg. 257 instead of 769).
++        HINT: If you use this option because normal <mode> parameter does
++        not work for you and you use a X server, you'll probably want to
++        set the 'nocrtc' option to ensure that the video mode is properly
++        restored after console <-> X switches.
++
++nocrtc  Do not use CRTC timings while setting the video mode. This option
++        makes sence only with VBE 3.0 compliant systems. Use it if you have
++        problems with modes set in the standard way. Note that using this
++		option means that any refresh rate adjustments will be ignored
++		and the refresh rate will stay at your BIOS default (60 Hz).
++
++noedid  Do not try to fetch and use EDID-provided modes.
++
++noblank Disable hardware blanking.
++
++gtf     Force the use of VESA's GTF (Generalized Timing Formula). Specifying
++        this will cause vesafb to skip its internal modedb and EDID-modedb
++        and jump straight to the GTF part of the code (normally used only if
++        everything else failed). This can be useful if you want to get as
++        much as possible from your graphics board but your BIOS doesn't
++        support modes with the refresh rates you require. Note that you may 
++		need to specify the maxhf, maxvf and maxclk parameters if they are not
++        provided by the EDID block.
++
++Additionally, the following parameters may be provided. They all override the
++EDID-provided values and BIOS defaults. Refer to your monitor's specs to get
++the correct values for maxhf, maxvf and maxclk for your hardware.
++
++maxhf:n     Maximum horizontal frequency (in kHz).
++maxvf:n     Maximum vertical frequency (in Hz).
++maxclk:n    Maximum pixel clock (in MHz).
+ 
+-  Gerd
++Have fun!
+ 
+ --
++Original document for the vesafb driver by
+ Gerd Knorr <kraxel@goldbach.in-berlin.de>
+ 
+-Minor (mostly typo) changes 
+-by Nico Schmoigl <schmoigl@rumms.uni-mannheim.de>
++Minor (mostly typo) changes by
++Nico Schmoigl <schmoigl@rumms.uni-mannheim.de>
++
++Extended documentation for vm86, VBE 3.0 and vesafb-tng by
++Michal Januszewski <spock@gentoo.org>
++
+diff --git a/arch/i386/boot/video.S b/arch/i386/boot/video.S
+index 2c5b5cc..2c2d4b5 100644
+--- a/arch/i386/boot/video.S
++++ b/arch/i386/boot/video.S
+@@ -163,10 +163,12 @@ basret:	ret
+ # parameters in the default 80x25 mode -- these are set directly,
+ # because some very obscure BIOSes supply insane values.
+ mode_params:
++#ifdef CONFIG_FB_VESA_STD
+ #ifdef CONFIG_VIDEO_SELECT
+ 	cmpb	$0, graphic_mode
+ 	jnz	mopar_gr
+ #endif
++#endif
+ 	movb	$0x03, %ah			# Read cursor position
+ 	xorb	%bh, %bh
+ 	int	$0x10
+@@ -199,6 +201,7 @@ mopar2: movb	%al, %fs:(PARAM_VIDEO_LINES)
+ 	ret
+ 
+ #ifdef CONFIG_VIDEO_SELECT
++#ifdef CONFIG_FB_VESA_STD
+ # Fetching of VESA frame buffer parameters
+ mopar_gr:
+ 	leaw	modelist+1024, %di
+@@ -281,6 +284,7 @@ dac_done:
+ 	movw	%es, %fs:(PARAM_VESAPM_SEG)
+ 	movw	%di, %fs:(PARAM_VESAPM_OFF)
+ no_pm:	ret
++#endif
+ 
+ # The video mode menu
+ mode_menu:
+@@ -495,10 +499,12 @@ mode_set:
+ 	
+ 	cmpb	$VIDEO_FIRST_V7>>8, %ah
+ 	jz	setv7
+-	
++
++#ifdef CONFIG_FB_VESA_STD
+ 	cmpb	$VIDEO_FIRST_VESA>>8, %ah
+ 	jnc	check_vesa
+-	
++#endif	
++
+ 	orb	%ah, %ah
+ 	jz	setmenu
+ 	
+@@ -570,6 +576,7 @@ setr1:	lodsw
+ 	movw	-4(%si), %ax			# Fetch mode ID
+ 	jmp	_m_s
+ 
++#ifdef CONFIG_FB_VESA_STD
+ check_vesa:
+ 	leaw	modelist+1024, %di
+ 	subb	$VIDEO_FIRST_VESA>>8, %bh
+@@ -603,6 +610,7 @@ check_vesa:
+ 	ret
+ 
+ _setbad:	jmp	setbad          	# Ugly...
++#endif
+ 
+ # Recalculate vertical display end registers -- this fixes various
+ # inconsistencies of extended modes on many adapters. Called when
+diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
+index 1393523..8a05f95 100644
+--- a/drivers/char/sysrq.c
++++ b/drivers/char/sysrq.c
+@@ -240,7 +240,7 @@ static void send_sig_all(int sig)
+ 	struct task_struct *p;
+ 
+ 	for_each_process(p) {
+-		if (p->mm && !is_init(p))
++		if (p->mm && !is_init(p) && !(p->flags & PF_BORROWED_MM))
+ 			/* Not swapper, init nor kernel thread */
+ 			force_sig(sig, p);
+ 	}
+diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
+index 4e83f01..ae122fd 100644
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
+@@ -547,8 +547,22 @@ config FB_TGA
+ 	  cards. Say Y if you have one of those.
+ 
+ config FB_VESA
+-	bool "VESA VGA graphics support"
+-	depends on (FB = y) && X86
++	tristate "VESA VGA graphics support"
++	depends on (FB = y) && (X86 || X86_64)
++	help
++	  This is the frame buffer device driver for generic VESA 2.0
++	  compliant graphic cards. The older VESA 1.2 cards are not supported.
++	  You will get a boot time penguin logo at no additional cost. Please
++	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
++
++choice 
++	prompt "VESA driver type"
++	depends on FB_VESA
++	default FB_VESA_STD if X86_64
++	default FB_VESA_TNG if X86
++
++config FB_VESA_STD
++	bool "vesafb"
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+@@ -557,7 +571,43 @@ config FB_VESA
+ 	  This is the frame buffer device driver for generic VESA 2.0
+ 	  compliant graphic cards. The older VESA 1.2 cards are not supported.
+ 	  You will get a boot time penguin logo at no additional cost. Please
+-	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
++	  read <file:Documentation/fb/vesafb.txt>. Choose this driver if you
++	  are experiencing problems with vesafb-tng or if you own a 64-bit system.
++
++	  Note that this driver cannot be compiled as a module.
++
++config FB_VESA_TNG
++	bool "vesafb-tng"
++	depends on !X86_64
++	select FB_MODE_HELPERS
++	select FB_CFB_FILLRECT
++	select FB_CFB_COPYAREA
++	select FB_CFB_IMAGEBLIT
++	help
++	  This is an enhanced generic frame buffer device driver for
++	  VBE 2.0 compliant graphic cards. It can take advantage of VBE 3.0
++	  features (refresh rate adjustment) when these are available.
++	  The driver also makes it possible to change the video mode
++	  on the fly and to switch back to text mode when it's unloaded.
++
++	  If the driver is compiled as a module, the module will be called
++	  vesafb-tng.
++
++endchoice
++
++config FB_VESA_DEFAULT_MODE
++	string "VESA default mode"
++	depends on FB_VESA_TNG
++	default "640x480@60"
++	help 
++	  This option is used to determine the default mode vesafb is
++	  supposed to switch to in case no mode is provided as a kernel
++	  command line parameter.
++
++config VIDEO_SELECT
++	bool
++	depends on FB_VESA
++	default y
+ 
+ config FB_IMAC
+ 	bool "Intel-based Macintosh Framebuffer Support"
+diff --git a/drivers/video/Makefile b/drivers/video/Makefile
+index 309a26d..e57b0e7 100644
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
+@@ -102,7 +102,11 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
+ obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+ 
+ # Platform or fallback drivers go here
+-obj-$(CONFIG_FB_VESA)             += vesafb.o
++ifeq ($(CONFIG_FB_VESA_STD),y)
++  obj-y				  += vesafb.o
++else
++  obj-$(CONFIG_FB_VESA)		  += vesafb-thread.o vesafb-tng.o
++endif
+ obj-$(CONFIG_FB_IMAC)             += imacfb.o
+ obj-$(CONFIG_FB_VGA16)            += vga16fb.o vgastate.o
+ obj-$(CONFIG_FB_OF)               += offb.o
+diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
+index 3cfea31..bfb39cc 100644
+--- a/drivers/video/fbmem.c
++++ b/drivers/video/fbmem.c
+@@ -1408,6 +1408,7 @@ fbmem_init(void)
+ 		printk(KERN_WARNING "Unable to create fb class; errno = %ld\n", PTR_ERR(fb_class));
+ 		fb_class = NULL;
+ 	}
++
+ 	return 0;
+ }
+ 
+diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
+index 5df41f6..f838a53 100644
+--- a/drivers/video/modedb.c
++++ b/drivers/video/modedb.c
+@@ -674,6 +674,7 @@ void fb_var_to_videomode(struct fb_videomode *mode,
+ {
+ 	u32 pixclock, hfreq, htotal, vtotal;
+ 
++	mode->refresh = 0;
+ 	mode->name = NULL;
+ 	mode->xres = var->xres;
+ 	mode->yres = var->yres;
+@@ -1025,3 +1026,4 @@ EXPORT_SYMBOL(fb_find_best_mode);
+ EXPORT_SYMBOL(fb_find_nearest_mode);
+ EXPORT_SYMBOL(fb_videomode_to_modelist);
+ EXPORT_SYMBOL(fb_find_mode);
++EXPORT_SYMBOL(fb_destroy_modelist);
+diff --git a/drivers/video/vesafb-thread.c b/drivers/video/vesafb-thread.c
+new file mode 100644
+index 0000000..543e202
+--- /dev/null
++++ b/drivers/video/vesafb-thread.c
+@@ -0,0 +1,751 @@
++/*
++ * Framebuffer driver for VBE 2.0+ compliant graphic boards.
++ * Kernel thread and vm86 routines.
++ *
++ * (c) 2004-2006 Michal Januszewski <spock@gentoo.org>
++ *
++ */
++
++#include <linux/workqueue.h>
++#include <linux/completion.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/mm.h>
++#include <linux/delay.h>
++#include <linux/signal.h>
++#include <linux/freezer.h>
++#include <linux/suspend.h>
++#include <linux/unistd.h>
++#include <video/vesa.h>
++#include <video/edid.h>
++#include <asm/mman.h>
++#include <asm/page.h>
++#include <asm/vm86.h>
++#include <asm/thread_info.h>
++#include <asm/uaccess.h>
++#include <asm/mmu_context.h>
++#include "edid.h"
++
++static int errno;
++
++static DECLARE_COMPLETION(vesafb_th_completion);
++static DECLARE_MUTEX(vesafb_task_list_sem);
++static LIST_HEAD(vesafb_task_list);
++static DECLARE_WAIT_QUEUE_HEAD(vesafb_wait);
++
++static struct vm86_struct vm86;
++static int vesafb_pid = 0;
++
++#define DEFAULT_VM86_FLAGS (IF_MASK | IOPL_MASK)
++#define VM86_PUSHW(x)					\
++do { 							\
++	vm86.regs.esp -= 2; 				\
++	*(u16*)(STACK_ADDR + vm86.regs.esp) = x;	\
++} while(0);
++
++/* Stack, the return code and buffers will be put into
++ * one contiguous memory chunk:
++ *
++ * [ STACK | RET_CODE | BUFFER ]
++ *
++ * Some video BIOSes (sis6326) try to store data somewhere
++ * in 0x7000-0x7fff, so we zeromap more memory to be safe.
++ */
++#define IVTBDA_SIZE 	PAGE_SIZE
++#define RET_CODE_SIZE	0x0010
++#define STACK_SIZE	0x0500
++#define BUFFER_SIZE	0x10000
++
++/* The amount of memory that will be allocated should be a multiple
++ * of PAGE_SIZE. */
++#define __MEM_SIZE 	(RET_CODE_SIZE + STACK_SIZE + BUFFER_SIZE)
++#define REAL_MEM_SIZE	(((__MEM_SIZE / PAGE_SIZE) + 1) * PAGE_SIZE)
++
++#define IVTBDA_ADDR	0x00000
++#define STACK_ADDR	(IVTBDA_ADDR + IVTBDA_SIZE)
++#define RET_CODE_ADDR	(STACK_ADDR + STACK_SIZE)
++#define BUF_ADDR	(RET_CODE_ADDR + RET_CODE_SIZE)
++
++#define FLAG_D 		(1 << 10)
++
++/* Syscalls used by the vesafb thread */
++static int vm86old(struct vm86_struct __user* v86)
++{
++	long res;
++	__asm__ volatile ("push %%ebx; movl %2, %%ebx ; int $0x80 ; pop %%ebx"
++			: "=a" (res)
++			: "0" (__NR_vm86old), "ri" ((long)(v86)) : "memory");
++
++	if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) {
++		errno = -res;
++		res = -1;
++	}
++	return (int)res;
++}
++
++static int ioperm(unsigned long a, unsigned long b, unsigned long c)
++{
++	long res;
++	__asm__ volatile ("push %%ebx; movl %2, %%ebx ; int $0x80 ; pop %%ebx"
++			: "=a" (res)
++			: "0" (__NR_ioperm), "ri" ((long)(a)), "c" ((long)(b)),
++			  "d" ((long)(c)) : "memory");
++
++	if ((unsigned long)(res) >= (unsigned long)(-MAX_ERRNO)) {
++		errno = -res;
++		res = -1;
++	}
++	return (int)res;
++}
++
++/* Segment prefix opcodes */
++enum {
++	P_CS = 0x2e,
++	P_SS = 0x36,
++	P_DS = 0x3e,
++	P_ES = 0x26,
++	P_FS = 0x64,
++	P_GS = 0x65
++};
++
++/* Emulated vm86 ins instruction */
++static void vm86_ins(int size)
++{
++	u32 edx, edi;
++	edx = vm86.regs.edx & 0xffff;
++	edi = (vm86.regs.edi & 0xffff) + (u32)(vm86.regs.es << 4);
++
++	if (vm86.regs.eflags & FLAG_D)
++		asm volatile ("std\n");
++	else
++		asm volatile ("cld\n");
++
++	switch (size) {
++	case 4:
++		asm volatile ("insl\n" : "=D" (edi) : "d" (edx), "0" (edi));
++		break;
++	case 2:
++		asm volatile ("insw\n" : "=D" (edi) : "d" (edx), "0" (edi));
++		break;
++	case 1:
++		asm volatile ("insb\n" : "=D" (edi) : "d" (edx), "0" (edi));
++		break;
++	}
++
++	if (vm86.regs.eflags & FLAG_D)
++		asm volatile ("cld\n");
++
++	edi -= (u32)(vm86.regs.es << 4);
++
++	vm86.regs.edi &= 0xffff0000;
++	vm86.regs.edi |= edi & 0xffff;
++}
++
++static void vm86_rep_ins(int size)
++{
++	u16 cx = vm86.regs.ecx;
++	while (cx--)
++		vm86_ins(size);
++
++	vm86.regs.ecx &= 0xffff0000;
++}
++
++/* Emulated vm86 outs instruction */
++static void vm86_outs(int size, int segment)
++{
++	u32 edx, esi, base;
++
++	edx = vm86.regs.edx & 0xffff;
++	esi = vm86.regs.esi & 0xffff;
++
++	switch (segment) {
++	case P_CS: base = vm86.regs.cs; break;
++	case P_SS: base = vm86.regs.ss; break;
++	case P_ES: base = vm86.regs.es; break;
++	case P_FS: base = vm86.regs.fs; break;
++	case P_GS: base = vm86.regs.gs; break;
++	default:   base = vm86.regs.ds; break;
++	}
++
++	esi += base << 4;
++
++	if (vm86.regs.eflags & FLAG_D)
++		asm volatile ("std\n");
++	else
++		asm volatile ("cld\n");
++
++	switch (size) {
++	case 4:
++		asm volatile ("outsl\n" : "=S" (esi) : "d" (edx), "0" (esi));
++		break;
++	case 2:
++		asm volatile ("outsw\n" : "=S" (esi) : "d" (edx), "0" (esi));
++		break;
++	case 1:
++		asm volatile ("outsb\n" : "=S" (esi) : "d" (edx), "0" (esi));
++		break;
++	}
++
++	if (vm86.regs.eflags & FLAG_D)
++		asm volatile ("cld");
++
++	esi -= base << 4;
++	vm86.regs.esi &= 0xffff0000;
++	vm86.regs.esi |= (esi & 0xffff);
++}
++
++static void vm86_rep_outs(int size, int segment)
++{
++	u16 cx = vm86.regs.ecx;
++	while (cx--)
++		vm86_outs(size, segment);
++
++	vm86.regs.ecx &= 0xffff0000;
++}
++
++static int vm86_do_unknown(void)
++{
++	u8 data32 = 0, segment = P_DS, rep = 0;
++	u8 *instr;
++	int ret = 0, i = 0;
++
++	instr = (u8*)((vm86.regs.cs << 4) + vm86.regs.eip);
++
++	while (1) {
++		switch(instr[i]) {
++		case 0x66:	/* operand size prefix */
++			data32 = 1 - data32;
++			i++;
++			break;
++		case 0xf2:	/* repnz */
++		case 0xf3:	/* rep */
++			rep = 1;
++			i++;
++			break;
++		case P_CS:	/* segment prefix */
++		case P_SS:
++		case P_DS:
++		case P_ES:
++		case P_FS:
++		case P_GS:
++			segment = instr[i];
++			i++;
++			break;
++		case 0xf0:	/* LOCK - ignored */
++		case 0x67:	/* address size prefix - ignored */
++			i++;
++			break;
++		case 0x6c:	/* insb */
++			if (rep)
++				vm86_rep_ins(1);
++			else
++				vm86_ins(1);
++			i++;
++			goto out;
++		case 0x6d:	/* insw / insd */
++			if (rep) {
++				if (data32)
++					vm86_rep_ins(4);
++				else
++					vm86_rep_ins(2);
++			} else {
++				if (data32)
++					vm86_ins(4);
++				else
++					vm86_ins(2);
++			}
++			i++;
++			goto out;
++		case 0x6e:	/* outsb */
++			if (rep)
++				vm86_rep_outs(1, segment);
++			else
++				vm86_outs(1, segment);
++			i++;
++			goto out;
++		case 0x6f:	/* outsw / outsd */
++			if (rep) {
++				if (data32)
++					vm86_rep_outs(4, segment);
++				else
++					vm86_rep_outs(2, segment);
++			} else {
++				if (data32)
++					vm86_outs(4, segment);
++				else
++					vm86_outs(2, segment);
++			}
++			i++;
++			goto out;
++		case 0xe4:	/* inb xx */
++			asm volatile (
++				"inb %w1, %b0"
++				: "=a" (vm86.regs.eax)
++				: "d" (instr[i+1]), "0" (vm86.regs.eax));
++			i += 2;
++			goto out;
++		case 0xe5:	/* inw xx / ind xx */
++			if (data32) {
++				asm volatile (
++					"inl %w1, %0"
++					: "=a" (vm86.regs.eax)
++					: "d" (instr[i+1]),
++					  "0" (vm86.regs.eax));
++			} else {
++				asm volatile (
++					"inw %w1, %w0"
++					: "=a" (vm86.regs.eax)
++					: "d" (instr[i+1]),
++					  "0" (vm86.regs.eax));
++			}
++			i += 2;
++			goto out;
++
++		case 0xec:	/* inb dx */
++			asm volatile (
++				"inb %w1, %b0"
++	 			: "=a" (vm86.regs.eax)
++				: "d" (vm86.regs.edx), "0" (vm86.regs.eax));
++			i++;
++			goto out;
++		case 0xed:	/* inw dx / ind dx */
++			if (data32) {
++				asm volatile (
++					"inl %w1, %0"
++					: "=a" (vm86.regs.eax)
++					: "d" (vm86.regs.edx));
++			} else {
++				asm volatile (
++					"inw %w1, %w0"
++					: "=a" (vm86.regs.eax)
++					: "d" (vm86.regs.edx));
++			}
++			i++;
++			goto out;
++		case 0xe6:	/* outb xx */
++			asm volatile (
++				"outb %b0, %w1"
++				: /* no return value */
++				: "a" (vm86.regs.eax), "d" (instr[i+1]));
++			i += 2;
++			goto out;
++		case 0xe7:	/* outw xx / outd xx */
++			if (data32) {
++				asm volatile (
++					"outl %0, %w1"
++					: /* no return value */
++					: "a" (vm86.regs.eax),
++					  "d" (instr[i+1]));
++			} else {
++				asm volatile (
++					"outw %w0, %w1"
++					: /* no return value */
++					: "a" (vm86.regs.eax),
++					  "d" (instr[i+1]));
++			}
++			i += 2;
++			goto out;
++		case 0xee:	/* outb dx */
++			asm volatile (
++				"outb %b0, %w1"
++				: /* no return value */
++				: "a" (vm86.regs.eax), "d" (vm86.regs.edx));
++			i++;
++			goto out;
++		case 0xef:	/* outw dx / outd dx */
++			if (data32) {
++				asm volatile (
++					"outl %0, %w1"
++					: /* no return value */
++					: "a" (vm86.regs.eax),
++					  "d" (vm86.regs.edx));
++			} else {
++				asm volatile (
++					"outw %w0, %w1"
++					: /* no return value */
++					: "a" (vm86.regs.eax),
++					  "d" (vm86.regs.edx));
++			}
++			i++;
++			goto out;
++		default:
++			printk(KERN_ERR "vesafb: BUG, opcode 0x%x emulation "
++					"not supported (EIP: 0x%lx)\n",
++					instr[i], (u32)(vm86.regs.cs << 4) +
++					vm86.regs.eip);
++			ret = 1;
++			goto out;
++		}
++	}
++out: 	vm86.regs.eip += i;
++	return ret;
++}
++
++void vesafb_do_vm86(struct vm86_regs *regs)
++{
++	unsigned int ret;
++	u8 *retcode = (void*)RET_CODE_ADDR;
++
++	memset(&vm86,0,sizeof(vm86));
++	memcpy(&vm86.regs, regs, sizeof(struct vm86_regs));
++
++	/* The return code */
++	retcode[0] = 0xcd;  		/* int opcode */
++	retcode[1] = 0xff;		/* int number (255) */
++
++        /* We use int 0xff to get back to protected mode */
++	memset(&vm86.int_revectored, 0, sizeof(vm86.int_revectored));
++        ((unsigned char *)&vm86.int_revectored)[0xff / 8] |= (1 << (0xff % 8));
++
++	/*
++	 * We want to call int 0x10, so we set:
++	 *   CS = 0x42 = 0x10 * 4 + 2
++	 *   IP = 0x40 = 0x10 * 4
++	 * and SS:ESP. It's up to the caller to set the rest of the registers.
++	 */
++	vm86.regs.eflags = DEFAULT_VM86_FLAGS;
++	vm86.regs.cs = *(unsigned short *)0x42;
++	vm86.regs.eip = *(unsigned short *)0x40;
++	vm86.regs.ss = (STACK_ADDR >> 4);
++	vm86.regs.esp = ((STACK_ADDR & 0x0000f) + STACK_SIZE);
++
++	/* These will be fetched off the stack when we come to an iret in the
++	 * int's 0x10 code. */
++	VM86_PUSHW(DEFAULT_VM86_FLAGS);
++	VM86_PUSHW((RET_CODE_ADDR >> 4));	/* return code segment */
++	VM86_PUSHW((RET_CODE_ADDR & 0x0000f));	/* return code offset */
++
++	while(1) {
++		ret = vm86old(&vm86);
++
++		if (VM86_TYPE(ret) == VM86_INTx) {
++			int vint = VM86_ARG(ret);
++
++			/* If exit from vm86 was caused by int 0xff, then
++			 * we're done.. */
++			if (vint == 0xff)
++				goto out;
++
++			/* .. otherwise, we have to call the int handler
++			 * manually */
++			VM86_PUSHW(vm86.regs.eflags);
++			VM86_PUSHW(vm86.regs.cs);
++			VM86_PUSHW(vm86.regs.eip);
++
++			vm86.regs.cs = *(u16 *)((vint << 2) + 2);
++			vm86.regs.eip = *(u16 *)(vint << 2);
++			vm86.regs.eflags &= ~(VIF_MASK | TF_MASK);
++		} else if (VM86_TYPE(ret) == VM86_UNKNOWN) {
++			if (vm86_do_unknown())
++				goto out;
++		} else {
++			printk(KERN_ERR "vesafb: BUG, returned from "
++					"vm86 with %x (EIP: 0x%lx)\n",
++					ret, (u32)(vm86.regs.cs << 4) +
++					vm86.regs.eip);
++			goto out;
++		}
++	}
++
++out:	/* copy the registers' state back to the caller's struct */
++	memcpy(regs, &vm86.regs, sizeof(struct vm86_regs));
++}
++
++static int vesafb_remap_pfn_range(unsigned long start, unsigned long end,
++				  unsigned long pgoff, unsigned long prot,
++				  int type)
++{
++	struct vm_area_struct *vma;
++	struct mm_struct *mm = current->mm;
++	int ret = 0;
++
++	vma = kmem_cache_alloc(vm_area_cachep, GFP_KERNEL);
++	if (!vma)
++		return -ENOMEM;
++	memset(vma, 0, sizeof(*vma));
++	down_write(&mm->mmap_sem);
++	vma->vm_mm = mm;
++	vma->vm_start = start;
++	vma->vm_end = end;
++	vma->vm_flags = VM_READ | VM_WRITE | VM_EXEC;
++	vma->vm_flags |= mm->def_flags;
++	vma->vm_page_prot.pgprot = prot;
++	vma->vm_pgoff = pgoff;
++
++	if ((ret = insert_vm_struct(mm, vma))) {
++		up_write(&mm->mmap_sem);
++		kmem_cache_free(vm_area_cachep, vma);
++		return ret;
++	}
++
++	if (type) {
++		ret = zeromap_page_range(vma,
++					 vma->vm_start,
++					 vma->vm_end - vma->vm_start,
++					 vma->vm_page_prot);
++	} else {
++		vma->vm_flags |= VM_SHARED;
++		ret = remap_pfn_range(vma,
++				      vma->vm_start,
++				      vma->vm_pgoff,
++				      vma->vm_end - vma->vm_start,
++				      vma->vm_page_prot);
++	}
++	up_write(&mm->mmap_sem);
++	return ret;
++}
++
++static inline int vesafb_init_mem(void)
++{
++	int ret = 0;
++
++	/* The memory chunks we're remapping here should be multiples
++	 * of PAGE_SIZE. */
++	ret += vesafb_remap_pfn_range(0x00000, IVTBDA_SIZE, 0,
++				      PROT_READ | PROT_EXEC | PROT_WRITE, 0);
++	ret += vesafb_remap_pfn_range(IVTBDA_SIZE, REAL_MEM_SIZE, 0,
++				      PROT_READ | PROT_EXEC | PROT_WRITE, 1);
++	ret += vesafb_remap_pfn_range(0x9f000, 0x100000, 
++				      0x9f000 >> PAGE_SHIFT,
++				      PROT_READ | PROT_EXEC | PROT_WRITE, 0);
++	if (ret)
++		printk(KERN_ERR "vesafb thread: memory remapping failed\n");
++
++	return ret;
++}
++
++#define vesafb_get_string(str) \
++{ 									\
++	/* The address is in the form ssssoooo, where oooo = offset,	\
++	 * ssss = segment */						\
++	addr = ((p_vbe(tsk->buf)->str & 0xffff0000) >> 12) +		\
++		(p_vbe(tsk->buf)->str & 0x0000ffff);			\
++									\
++	/* The data is in ROM which is shared between processes, so we 	\
++	 * just translate the real mode address into one visible from 	\
++	 * kernel space */						\
++	if (addr >= 0xa0000) {						\
++		p_vbe(tsk->buf)->str = (u32) __va(addr);		\
++									\
++	/* The data is in the buffer, we just have to convert the	\
++	 * address so that it points into the buffer user provided. */	\
++	} else if (addr > BUF_ADDR && addr < BUF_ADDR +			\
++		   sizeof(struct vesafb_vbe_ib)) {			\
++		addr -= BUF_ADDR;					\
++		p_vbe(tsk->buf)->str = (u32) (tsk->buf + addr);		\
++									\
++	/* This should never happen: someone was insane enough to put	\
++	 * the data somewhere in RAM.. */				\
++	} else {							\
++		p_vbe(tsk->buf)->str = (u32) "";			\
++	}								\
++}
++
++void vesafb_handle_getvbeib(struct vesafb_task *tsk)
++{
++	int addr, res;
++
++	tsk->regs.es  = (BUF_ADDR >> 4);
++	tsk->regs.edi = (BUF_ADDR & 0x000f);
++	strncpy(p_vbe(BUF_ADDR)->vbe_signature, "VBE2", 4);
++
++	vesafb_do_vm86(&tsk->regs);
++	memcpy(tsk->buf, (void*)(BUF_ADDR), sizeof(struct vesafb_vbe_ib));
++
++	/* The OEM fields were not defined prior to VBE 2.0 */
++	if (p_vbe(tsk->buf)->vbe_version >= 0x200) {
++		vesafb_get_string(oem_string_ptr);
++		vesafb_get_string(oem_vendor_name_ptr);
++		vesafb_get_string(oem_product_name_ptr);
++		vesafb_get_string(oem_product_rev_ptr);
++	}
++
++	/* This is basically the same as vesafb_get_string() */
++	addr = ((p_vbe(tsk->buf)->mode_list_ptr & 0xffff0000) >> 12) +
++		(p_vbe(tsk->buf)->mode_list_ptr & 0x0000ffff);
++
++	if (addr >= 0xa0000) {
++		p_vbe(tsk->buf)->mode_list_ptr = (u32) __va(addr);
++	} else if (addr > BUF_ADDR && addr < BUF_ADDR +
++		   sizeof(struct vesafb_vbe_ib)) {
++		addr -= BUF_ADDR;
++		p_vbe(tsk->buf)->mode_list_ptr = (u32) (tsk->buf + addr);
++	} else {
++		res = 0;
++		printk(KERN_WARNING "vesafb: warning, copying modelist "
++				    "from somewhere in RAM!\n");
++		while (*(u16*)(addr+res) != 0xffff &&
++		       res < (sizeof(p_vbe(tsk->buf)->reserved) - 2)) {
++			*(u16*) ((u32)&(p_vbe(tsk->buf)->reserved) + res) =
++				*(u16*)(addr+res);
++			res += 2;
++		}
++		*(u16*) ((u32)&(p_vbe(tsk->buf)->reserved) + res) = 0xffff;
++	}
++}
++
++int vesafb_handle_tasks(void)
++{
++	struct vesafb_task *tsk;
++	struct list_head *curr, *next;
++	int ret = 0;
++
++	down(&vesafb_task_list_sem);
++	list_for_each_safe(curr, next, &vesafb_task_list) {
++		tsk = list_entry(curr, struct vesafb_task, node);
++
++		if (tsk->flags & TF_EXIT) {
++			ret = 1;
++			goto task_done;
++		}
++		if (tsk->flags & TF_GETVBEIB) {
++			vesafb_handle_getvbeib(tsk);
++			goto task_done;
++		}
++		/* Do we need to store a pointer to the buffer in ES:EDI? */
++		if (tsk->flags & TF_BUF_DI) {
++			tsk->regs.es  = (BUF_ADDR >> 4);
++			tsk->regs.edi = (BUF_ADDR & 0x000f);
++		}
++		/* Sometimes the pointer has to be in ES:EBX. */
++		if (tsk->flags & TF_BUF_BX) {
++			tsk->regs.es  = (BUF_ADDR >> 4);
++			tsk->regs.ebx = (BUF_ADDR & 0x000f);
++		}
++		if (tsk->flags & (TF_BUF_DI | TF_BUF_BX))
++			memcpy((void*)BUF_ADDR, tsk->buf, tsk->buf_len);
++
++		vesafb_do_vm86(&tsk->regs);
++
++		if (tsk->flags & TF_RETURN_BUF)
++			memcpy(tsk->buf, (void*)BUF_ADDR, tsk->buf_len);
++
++task_done:	list_del(curr);
++		complete(&tsk->done);
++	}
++
++	/* If we're going to kill this thread, don't allow any elements
++	 * to be added to the task list. */
++	if (!ret)
++		up(&vesafb_task_list_sem);
++
++	return ret;
++}
++
++/*
++ * This 'hybrid' thread serves as a backend for vesafb-tng, handling all vm86
++ * calls. It is started as a kernel thread. It then creates its own mm struct,
++ * thus separating itself from any userspace processes. At this moment, it
++ * stops being a kernel thread (kernel threads have mm = NULL) and becomes
++ * a 'hybrid' thread -- one that has full access to kernel space, yet runs
++ * with its own address space.
++ *
++ * This is necessary because in order to make vm86 calls some parts of the
++ * first 1MB of RAM have to be setup to mimic the real mode. These are:
++ *  - interrupt vector table	[0x00000-0x003ff]
++ *  - BIOS data area		[0x00400-0x004ff]
++ *  - Extended BIOS data area	[0x9fc00-0x9ffff]
++ *  - the video RAM		[0xa0000-0xbffff]
++ *  - video BIOS		[0xc0000-0xcffff]
++ *  - motherboard BIOS		[0xf0000-0xfffff]
++ */
++int vesafb_thread(void *unused)
++{
++	int err = 0;
++
++	set_fs(KERNEL_DS);
++	daemonize("vesafb");
++
++	if (set_new_mm()) {
++		err = -ENOMEM;
++		goto thr_end;
++	}
++	if (vesafb_init_mem()) {
++		err = -ENOMEM;
++		goto thr_end;
++	}
++
++	DPRINTK("started vesafb thread\n");
++
++	/* Having an IO bitmap makes things faster as we avoid GPFs
++	 * when running vm86 code. We can live if it fails, though,
++	 * so don't bother checking for errors. */
++	ioperm(0,1024,1);
++	set_user_nice(current, -10);
++
++	complete(&vesafb_th_completion);
++
++	while (1) {
++		if (vesafb_handle_tasks())
++			break;
++		wait_event_interruptible(vesafb_wait,
++					 !list_empty(&vesafb_task_list));
++		try_to_freeze();
++	}
++
++out:	DPRINTK("exiting the vesafb thread\n");
++	vesafb_pid = -1;
++
++	/* Now that all callers know this thread is no longer running
++	 * (pid < 0), allow them to continue. */
++	up(&vesafb_task_list_sem);
++	return err;
++thr_end:
++	down(&vesafb_task_list_sem);
++	complete(&vesafb_th_completion);
++	goto out;	
++}
++
++int vesafb_queue_task(struct vesafb_task *tsk)
++{
++	down(&vesafb_task_list_sem);
++	if (vesafb_pid < 0)
++		return -1;
++	list_add_tail(&tsk->node, &vesafb_task_list);
++	up(&vesafb_task_list_sem);
++	wake_up(&vesafb_wait);
++	return 0;
++}
++
++int vesafb_wait_for_thread(void)
++{
++	/* PID 0 means that the thread is still initializing. */
++	if (vesafb_pid < 0)
++		return -1;
++	wait_for_completion(&vesafb_th_completion);
++	return 0;
++}
++
++int __init vesafb_init_thread(void)
++{
++	vesafb_pid = kernel_thread(vesafb_thread,NULL,0);
++	return 0;
++}
++
++#ifdef MODULE
++void __exit vesafb_kill_thread(void)
++{
++	struct vesafb_task *tsk;
++	if (vesafb_pid <= 0)
++		return;
++
++	vesafb_create_task(tsk);
++	if (!tsk)
++		return;
++	tsk->flags |= TF_EXIT;
++	vesafb_queue_task(tsk);
++	vesafb_wait_for_task(tsk);
++	kfree(tsk);
++	return;
++}
++module_exit(vesafb_kill_thread);
++#endif
++module_init(vesafb_init_thread);
++
++EXPORT_SYMBOL_GPL(vesafb_queue_task);
++EXPORT_SYMBOL_GPL(vesafb_wait_for_thread);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Michal Januszewski");
++
+diff --git a/drivers/video/vesafb-tng.c b/drivers/video/vesafb-tng.c
+new file mode 100644
+index 0000000..b4d4394
+--- /dev/null
++++ b/drivers/video/vesafb-tng.c
+@@ -0,0 +1,1586 @@
++/*
++ * Framebuffer driver for VBE 2.0+ compliant graphic boards
++ *
++ * (c) 2004-2006 Michal Januszewski <spock@gentoo.org>
++ *     Based upon vesafb code by Gerd Knorr <kraxel@goldbach.in-berlin.de>
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/string.h>
++#include <linux/mm.h>
++#include <linux/tty.h>
++#include <linux/delay.h>
++#include <linux/fb.h>
++#include <linux/ioport.h>
++#include <linux/init.h>
++#include <linux/proc_fs.h>
++#include <linux/completion.h>
++#include <linux/platform_device.h>
++#include <video/edid.h>
++#include <video/vesa.h>
++#include <video/vga.h>
++#include <asm/io.h>
++#include <asm/mtrr.h>
++#include <asm/page.h>
++#include <asm/pgtable.h>
++#include "edid.h"
++
++#define dac_reg	(0x3c8)
++#define dac_val	(0x3c9)
++
++#define VESAFB_NEED_EXACT_RES 	1
++#define VESAFB_NEED_EXACT_DEPTH 2
++
++/* --------------------------------------------------------------------- */
++
++static struct fb_var_screeninfo vesafb_defined __initdata = {
++	.activate	= FB_ACTIVATE_NOW,
++	.height		= 0,
++	.width		= 0,
++	.right_margin	= 32,
++	.upper_margin	= 16,
++	.lower_margin	= 4,
++	.vsync_len	= 4,
++	.vmode		= FB_VMODE_NONINTERLACED,
++};
++
++static struct fb_fix_screeninfo vesafb_fix __initdata = {
++	.id	= "VESA VGA",
++	.type	= FB_TYPE_PACKED_PIXELS,
++	.accel	= FB_ACCEL_NONE,
++};
++
++static int  mtrr       = 0;	/* disable mtrr by default */
++static int  blank      = 1;     /* enable blanking by default */
++static int  ypan       = 0;	/* 0 - nothing, 1 - ypan, 2 - ywrap */
++static int  pmi_setpal = 1;	/* pmi for palette changes */
++static u16  *pmi_base  = NULL;  /* protected mode interface location */
++static void (*pmi_start)(void) = NULL;
++static void (*pmi_pal)(void)   = NULL;
++static struct vesafb_vbe_ib  vbe_ib;
++static struct vesafb_mode_ib *vbe_modes;
++static int                   vbe_modes_cnt = 0;
++static struct fb_info	     *vesafb_info = NULL;
++static int  nocrtc		    = 0; /* ignore CRTC settings */
++static int  noedid       __initdata = 0; /* don't try DDC transfers */
++static int  vram_remap   __initdata = 0; /* set amount of memory to be used */
++static int  vram_total   __initdata = 0; /* set total amount of memory */
++static u16  maxclk       __initdata = 0; /* maximum pixel clock */
++static u16  maxvf        __initdata = 0; /* maximum vertical frequency */
++static u16  maxhf        __initdata = 0; /* maximum horizontal frequency */
++static int  gtf          __initdata = 0; /* forces use of the GTF */
++static char *mode_option __initdata = NULL;
++static u16  vbemode      __initdata = 0;
++
++/* --------------------------------------------------------------------- */
++
++static int vesafb_find_vbe_mode(int xres, int yres, int depth,
++				unsigned char flags)
++{
++	int i, match = -1, h = 0, d = 0x7fffffff;
++
++	for (i = 0; i < vbe_modes_cnt; i++) {
++		h = abs(vbe_modes[i].x_res - xres) +
++		    abs(vbe_modes[i].y_res - yres) +
++		    abs(depth - vbe_modes[i].depth);
++		if (h == 0)
++			return i;
++		if (h < d || (h == d && vbe_modes[i].depth > depth)) {
++			d = h;
++			match = i;
++		}
++	}
++	i = 1;
++
++	if (flags & VESAFB_NEED_EXACT_DEPTH && vbe_modes[match].depth != depth)
++		i = 0;
++	if (flags & VESAFB_NEED_EXACT_RES && d > 24)
++		i = 0;
++	if (i != 0)
++		return match;
++	else
++		return -1;
++}
++
++static int vesafb_pan_display(struct fb_var_screeninfo *var,
++                              struct fb_info *info)
++{
++	int offset;
++
++	offset = (var->yoffset * info->fix.line_length + var->xoffset) / 4;
++
++	/* It turns out it's not the best idea to do panning via vm86,
++	 * so we only allow it if we have a PMI. */
++	if (pmi_start) {
++		__asm__ __volatile__(
++			"call *(%%edi)"
++			: /* no return value */
++			: "a" (0x4f07),         /* EAX */
++			  "b" (0),              /* EBX */
++			  "c" (offset),         /* ECX */
++			  "d" (offset >> 16),   /* EDX */
++			  "D" (&pmi_start));    /* EDI */
++	}
++	return 0;
++}
++
++static int vesafb_blank(int blank, struct fb_info *info)
++{
++	struct vesafb_task *tsk;
++	int err = 1;
++
++	if (vbe_ib.capabilities & VBE_CAP_VGACOMPAT) {
++		int loop = 10000;
++		u8 seq = 0, crtc17 = 0;
++
++		if (blank == FB_BLANK_POWERDOWN) {
++			seq = 0x20;
++			crtc17 = 0x00;
++			err = 0;
++		} else {
++			seq = 0x00;
++			crtc17 = 0x80;
++			err = (blank == FB_BLANK_UNBLANK) ? 0 : -EINVAL;
++		}
++
++		vga_wseq(NULL, 0x00, 0x01);
++		seq |= vga_rseq(NULL, 0x01) & ~0x20;
++		vga_wseq(NULL, 0x00, seq);
++
++		crtc17 |= vga_rcrt(NULL, 0x17) & ~0x80;
++		while (loop--);
++		vga_wcrt(NULL, 0x17, crtc17);
++		vga_wseq(NULL, 0x00, 0x03);
++	} else {
++		vesafb_create_task (tsk);
++		if (!tsk)
++			return -ENOMEM;
++		tsk->regs.eax = 0x4f10;
++		switch (blank) {
++		case FB_BLANK_UNBLANK:
++			tsk->regs.ebx = 0x0001;
++			break;
++		case FB_BLANK_NORMAL:
++			tsk->regs.ebx = 0x0101;	/* standby */
++			break;
++		case FB_BLANK_POWERDOWN:
++			tsk->regs.ebx = 0x0401;	/* powerdown */
++			break;
++		default:
++			goto out;
++		}
++		tsk->flags = TF_CALL;
++		if (!vesafb_queue_task (tsk))
++			vesafb_wait_for_task(tsk);
++
++		if ((tsk->regs.eax & 0xffff) == 0x004f)
++			err = 0;
++out:		kfree(tsk);
++	}
++	return err;
++}
++
++static int vesafb_setpalette(struct vesafb_pal_entry *entries, int count,
++			     int start, struct fb_info *info)
++{
++	struct vesafb_task *tsk;
++	int i = ((struct vesafb_par*)info->par)->mode_idx;
++	int ret = 0;
++
++	/* We support palette modifications for 8 bpp modes only, so
++	 * there can never be more than 256 entries. */
++	if (start + count > 256)
++		return -EINVAL;
++
++	/* Use VGA registers if mode is VGA-compatible. */
++	if (i >= 0 && i < vbe_modes_cnt &&
++	    vbe_modes[i].mode_attr & VBE_MODE_VGACOMPAT) {
++		for (i = 0; i < count; i++) {
++			outb_p(start + i,        dac_reg);
++			outb_p(entries[i].red,   dac_val);
++			outb_p(entries[i].green, dac_val);
++			outb_p(entries[i].blue,  dac_val);
++		}
++	} else if (pmi_setpal) {
++		__asm__ __volatile__(
++		"call *(%%esi)"
++		: /* no return value */
++		: "a" (0x4f09),         /* EAX */
++		  "b" (0),              /* EBX */
++		  "c" (count),          /* ECX */
++		  "d" (start),          /* EDX */
++		  "D" (entries),        /* EDI */
++		  "S" (&pmi_pal));      /* ESI */
++	} else {
++		vesafb_create_task (tsk);
++		if (!tsk)
++			return -ENOMEM;
++		tsk->regs.eax = 0x4f09;
++		tsk->regs.ebx = 0x0;
++		tsk->regs.ecx = count;
++		tsk->regs.edx = start;
++		tsk->buf = entries;
++		tsk->buf_len = sizeof(struct vesafb_pal_entry) * count;
++		tsk->flags = TF_CALL | TF_BUF_DI;
++
++		if (!vesafb_queue_task (tsk))
++			vesafb_wait_for_task(tsk);
++		if ((tsk->regs.eax & 0xffff) != 0x004f)
++			ret = 1;
++		kfree(tsk);
++	}
++	return ret;
++}
++
++static int vesafb_setcolreg(unsigned regno, unsigned red, unsigned green,
++			    unsigned blue, unsigned transp,
++			    struct fb_info *info)
++{
++	struct vesafb_pal_entry entry;
++	int shift = 16 - info->var.green.length;
++	int ret = 0;
++
++	if (regno >= info->cmap.len)
++		return -EINVAL;
++
++	if (info->var.bits_per_pixel == 8) {
++		entry.red   = red   >> shift;
++		entry.green = green >> shift;
++		entry.blue  = blue  >> shift;
++		entry.pad   = 0;
++
++		ret = vesafb_setpalette(&entry, 1, regno, info);
++	} else if (regno < 16) {
++		switch (info->var.bits_per_pixel) {
++		case 16:
++			if (info->var.red.offset == 10) {
++				/* 1:5:5:5 */
++				((u32*) (info->pseudo_palette))[regno] =
++						((red   & 0xf800) >>  1) |
++						((green & 0xf800) >>  6) |
++						((blue  & 0xf800) >> 11);
++			} else {
++				/* 0:5:6:5 */
++				((u32*) (info->pseudo_palette))[regno] =
++						((red   & 0xf800)      ) |
++						((green & 0xfc00) >>  5) |
++						((blue  & 0xf800) >> 11);
++			}
++			break;
++
++		case 24:
++		case 32:
++			red   >>= 8;
++			green >>= 8;
++			blue  >>= 8;
++			((u32 *)(info->pseudo_palette))[regno] =
++				(red   << info->var.red.offset)   |
++				(green << info->var.green.offset) |
++				(blue  << info->var.blue.offset);
++			break;
++		}
++	}
++	return ret;
++}
++
++static int vesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
++{
++	struct vesafb_pal_entry *entries;
++	int shift = 16 - info->var.green.length;
++	int i, ret = 0;
++
++	if (info->var.bits_per_pixel == 8) {
++		if (cmap->start + cmap->len > info->cmap.start +
++		    info->cmap.len || cmap->start < info->cmap.start)
++			return -EINVAL;
++
++		entries = vmalloc(sizeof(struct vesafb_pal_entry) * cmap->len);
++		if (!entries)
++			return -ENOMEM;
++		for (i = 0; i < cmap->len; i++) {
++			entries[i].red   = cmap->red[i]   >> shift;
++			entries[i].green = cmap->green[i] >> shift;
++			entries[i].blue  = cmap->blue[i]  >> shift;
++			entries[i].pad   = 0;
++		}
++		ret = vesafb_setpalette(entries, cmap->len, cmap->start, info);
++		vfree(entries);
++	} else {
++		/* For modes with bpp > 8, we only set the pseudo palette in
++		 * the fb_info struct. We rely on vesafb_setcolreg to do all
++		 * sanity checking. */
++		for (i = 0; i < cmap->len; i++) {
++			ret += vesafb_setcolreg(cmap->start + i, cmap->red[i],
++						cmap->green[i], cmap->blue[i],
++						0, info);
++		}
++	}
++	return ret;
++}
++
++static int vesafb_set_par(struct fb_info *info)
++{
++	struct vesafb_par *par = (struct vesafb_par *) info->par;
++	struct vesafb_task *tsk;
++	struct vesafb_crtc_ib *crtc = NULL;
++	struct vesafb_mode_ib *mode = NULL;
++	int i, err = 0, depth = info->var.bits_per_pixel;
++
++	if (depth > 8 && depth != 32)
++		depth = info->var.red.length + info->var.green.length +
++			info->var.blue.length;
++
++	i = vesafb_find_vbe_mode(info->var.xres, info->var.yres, depth,
++				 VESAFB_NEED_EXACT_RES |
++				 VESAFB_NEED_EXACT_DEPTH);
++	if (i >= 0)
++		mode = &vbe_modes[i];
++	else
++		return -EINVAL;
++
++	vesafb_create_task (tsk);
++	if (!tsk)
++		return -ENOMEM;
++	tsk->regs.eax = 0x4f02;
++	tsk->regs.ebx = mode->mode_id | 0x4000;		/* use LFB */
++	tsk->flags = TF_CALL;
++
++	if (vbe_ib.vbe_version >= 0x0300 && !nocrtc &&
++	    info->var.pixclock != 0) {
++		tsk->regs.ebx |= 0x0800; 		/* use CRTC data */
++		tsk->flags |= TF_BUF_DI;
++		crtc = kmalloc(sizeof(struct vesafb_crtc_ib), GFP_KERNEL);
++		if (!crtc) {
++			err = -ENOMEM;
++			goto out;
++		}
++		crtc->horiz_start = info->var.xres + info->var.right_margin;
++		crtc->horiz_end	  = crtc->horiz_start + info->var.hsync_len;
++		crtc->horiz_total = crtc->horiz_end + info->var.left_margin;
++
++		crtc->vert_start  = info->var.yres + info->var.lower_margin;
++		crtc->vert_end    = crtc->vert_start + info->var.vsync_len;
++		crtc->vert_total  = crtc->vert_end + info->var.upper_margin;
++
++		crtc->pixel_clock = PICOS2KHZ(info->var.pixclock) * 1000;
++		crtc->refresh_rate = (u16)(100 * (crtc->pixel_clock /
++				     (crtc->vert_total * crtc->horiz_total)));
++		crtc->flags = 0;
++
++		if (info->var.vmode & FB_VMODE_DOUBLE)
++			crtc->flags |= 0x1;
++		if (info->var.vmode & FB_VMODE_INTERLACED)
++			crtc->flags |= 0x2;
++		if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
++			crtc->flags |= 0x4;
++		if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
++			crtc->flags |= 0x8;
++		memcpy(&par->crtc, crtc, sizeof(struct vesafb_crtc_ib));
++	} else
++		memset(&par->crtc, 0, sizeof(struct vesafb_crtc_ib));
++
++	tsk->buf = (void*)crtc;
++	tsk->buf_len = sizeof(struct vesafb_crtc_ib);
++
++	if (vesafb_queue_task (tsk)) {
++		err = -EINVAL;
++		goto out;
++	}
++	vesafb_wait_for_task(tsk);
++
++	if ((tsk->regs.eax & 0xffff) != 0x004f) {
++		printk(KERN_ERR "vesafb: mode switch failed (eax: 0x%lx)\n",
++				tsk->regs.eax);
++		err = -EINVAL;
++		goto out;
++	}
++	par->mode_idx = i;
++
++	/* For 8bpp modes, always try to set the DAC to 8 bits. */
++	if (vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC &&
++	    mode->bits_per_pixel <= 8) {
++		vesafb_reset_task(tsk);
++		tsk->flags = TF_CALL;
++		tsk->regs.eax = 0x4f08;
++		tsk->regs.ebx = 0x0800;
++
++		if (!vesafb_queue_task (tsk))
++			vesafb_wait_for_task(tsk);
++
++		if ((tsk->regs.eax & 0xffff) != 0x004f ||
++		    ((tsk->regs.ebx & 0xff00) >> 8) != 8) {
++			/* We've failed to set the DAC palette format -
++			 * time to correct var. */
++			info->var.red.length    = 6;
++			info->var.green.length  = 6;
++			info->var.blue.length   = 6;
++		}
++	}
++
++	info->fix.visual = (info->var.bits_per_pixel == 8) ?
++		           FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
++	info->fix.line_length = mode->bytes_per_scan_line;
++
++	DPRINTK("set new mode %dx%d-%d (0x%x)\n",
++		info->var.xres, info->var.yres, info->var.bits_per_pixel,
++		mode->mode_id);
++
++out:	if (crtc != NULL)
++		kfree(crtc);
++	kfree(tsk);
++
++	return err;
++}
++
++static void vesafb_setup_var(struct fb_var_screeninfo *var, struct fb_info *info,
++			     struct vesafb_mode_ib *mode)
++{
++	var->xres = mode->x_res;
++	var->yres = mode->y_res;
++	var->xres_virtual = mode->x_res;
++	var->yres_virtual = (ypan) ?
++			      info->fix.smem_len / mode->bytes_per_scan_line :
++			      mode->y_res;
++	var->xoffset = 0;
++	var->yoffset = 0;
++	var->bits_per_pixel = mode->bits_per_pixel;
++
++	if (var->bits_per_pixel == 15)
++		var->bits_per_pixel = 16;
++
++	if (var->bits_per_pixel > 8) {
++		var->red.offset    = mode->red_off;
++		var->red.length    = mode->red_len;
++		var->green.offset  = mode->green_off;
++		var->green.length  = mode->green_len;
++		var->blue.offset   = mode->blue_off;
++		var->blue.length   = mode->blue_len;
++		var->transp.offset = mode->rsvd_off;
++		var->transp.length = mode->rsvd_len;
++
++		DPRINTK("directcolor: size=%d:%d:%d:%d, shift=%d:%d:%d:%d\n",
++			mode->rsvd_len,
++			mode->red_len,
++			mode->green_len,
++			mode->blue_len,
++			mode->rsvd_off,
++			mode->red_off,
++			mode->green_off,
++			mode->blue_off);
++	} else {
++		var->red.offset    = 0;
++		var->green.offset  = 0;
++		var->blue.offset   = 0;
++		var->transp.offset = 0;
++
++		/* We're assuming that we can switch the DAC to 8 bits. If
++		 * this proves to be incorrect, we'll update the fields
++		 * later in set_par(). */
++		if (vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) {
++			var->red.length    = 8;
++			var->green.length  = 8;
++			var->blue.length   = 8;
++			var->transp.length = 0;
++		} else {
++			var->red.length    = 6;
++			var->green.length  = 6;
++			var->blue.length   = 6;
++			var->transp.length = 0;
++		}
++	}
++}
++
++static void inline vesafb_check_limits(struct fb_var_screeninfo *var,
++		 		       struct fb_info *info)
++{
++	struct fb_videomode *mode;
++
++	if (!var->pixclock)
++		return;
++	if (vbe_ib.vbe_version < 0x0300) {
++		fb_get_mode(FB_VSYNCTIMINGS | FB_IGNOREMON, 60, var, info);
++		return;
++	}
++	if (!fb_validate_mode(var, info))
++		return;
++	mode = fb_find_best_mode(var, &info->modelist);
++	if (mode) {
++		DPRINTK("find_best_mode: %d %d @ %d (vmode: %d)\n",
++			mode->xres, mode->yres, mode->refresh, mode->vmode);
++		if (mode->xres == var->xres && mode->yres == var->yres &&
++		    !(mode->vmode & (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE))) {
++			fb_videomode_to_var(var, mode);
++			return;
++		}
++	}
++	if (info->monspecs.gtf && !fb_get_mode(FB_MAXTIMINGS, 0, var, info))
++		return;
++	/* Use default refresh rate */
++	var->pixclock = 0;
++}
++
++static int vesafb_check_var(struct fb_var_screeninfo *var,
++			    struct fb_info *info)
++{
++	int match = -1;
++	int depth = var->red.length + var->green.length + var->blue.length;
++
++	/* Various apps will use bits_per_pixel to set the color depth,
++	 * which is theoretically incorrect, but which we'll try to handle
++	 * here. */
++	if (depth == 0 || abs(depth - var->bits_per_pixel) >= 8)
++		depth = var->bits_per_pixel;
++	match = vesafb_find_vbe_mode(var->xres, var->yres, depth,
++				     VESAFB_NEED_EXACT_RES);
++
++	if (match == -1) {
++		DPRINTK("vesafb: mode %dx%d-%d not found\n", var->xres,
++			var->yres, depth);
++		return -EINVAL;
++	}
++
++	vesafb_setup_var(var, info, &vbe_modes[match]);
++	DPRINTK("found mode 0x%x (%dx%d-%dbpp)\n",
++		vbe_modes[match].mode_id, vbe_modes[match].x_res,
++		vbe_modes[match].y_res, vbe_modes[match].depth);
++
++	/* Check whether we have remapped enough memory for this mode. */
++	if (var->yres * vbe_modes[match].bytes_per_scan_line >
++	    info->fix.smem_len) {
++		return -EINVAL;
++	}
++
++	if ((var->vmode & FB_VMODE_DOUBLE) &&
++	    !(vbe_modes[match].mode_attr & 0x100))
++		var->vmode &= ~FB_VMODE_DOUBLE;
++	if ((var->vmode & FB_VMODE_INTERLACED) &&
++	    !(vbe_modes[match].mode_attr & 0x200))
++		var->vmode &= ~FB_VMODE_INTERLACED;
++	vesafb_check_limits(var, info);
++	return 0;
++}
++
++static int vesafb_open(struct fb_info *info, int user)
++{
++	struct vesafb_task *tsk = NULL;
++	struct vesafb_par *par = info->par;
++	int cnt = atomic_read(&par->ref_count);
++
++	if (!cnt) {
++		vesafb_create_task(tsk);
++		if (!tsk)
++			goto out;
++
++		/* Get the VBE state buffer size. We want all available
++		 * hardware state data (CL = 0x0f). */
++		tsk->regs.eax = 0x4f04;
++		tsk->regs.ecx = 0x000f;
++		tsk->regs.edx = 0x0000;
++		tsk->flags = TF_CALL;
++
++		if (vesafb_queue_task(tsk))
++			goto out;
++	
++		vesafb_wait_for_task(tsk);
++		
++		if ((tsk->regs.eax & 0xffff) != 0x004f) {
++			printk(KERN_WARNING "vesafb: VBE state buffer size "
++				"cannot be determined (eax: 0x%lx)\n",
++				tsk->regs.eax);
++			goto out;
++		}
++
++		par->vbe_state_size = 64 * (tsk->regs.ebx & 0xffff);
++		par->vbe_state = kzalloc(par->vbe_state_size, GFP_KERNEL);
++		if (!par->vbe_state) 
++			goto out;
++
++		vesafb_reset_task(tsk);
++		tsk->regs.eax = 0x4f04;
++		tsk->regs.ecx = 0x000f;
++		tsk->regs.edx = 0x0001;
++		tsk->flags = TF_CALL | TF_BUF_BX | TF_RETURN_BUF;
++		tsk->buf = (void*)(par->vbe_state);
++		tsk->buf_len = par->vbe_state_size;
++
++		if (vesafb_queue_task(tsk))
++			goto getstate_failed;
++		vesafb_wait_for_task(tsk);
++
++		if ((tsk->regs.eax & 0xffff) != 0x004f) {
++			printk(KERN_WARNING "vesafb: VBE get state call "
++				"failed (eax: 0x%lx)\n", tsk->regs.eax);
++			goto getstate_failed;
++		}
++	}
++out:
++	atomic_inc(&par->ref_count);
++	if (tsk)
++		kfree(tsk);
++	return 0;
++
++getstate_failed:
++	kfree(par->vbe_state);
++	par->vbe_state = NULL;
++	par->vbe_state_size = 0;
++	goto out;
++}
++
++static int vesafb_release(struct fb_info *info, int user)
++{
++	struct vesafb_task *tsk = NULL;
++	struct vesafb_par *par = info->par;
++	int cnt = atomic_read(&par->ref_count);
++
++	if (!cnt)
++		return -EINVAL;
++	
++	if (cnt == 1 && par->vbe_state && par->vbe_state_size) {
++		vesafb_create_task(tsk);
++		if (!tsk)
++			goto out;
++
++		tsk->regs.eax = 0x0003;
++		tsk->regs.ebx = 0x0000;
++		tsk->flags = TF_CALL;
++
++		if (vesafb_queue_task(tsk))
++			goto out;
++	
++		vesafb_wait_for_task(tsk);
++
++		vesafb_reset_task(tsk);
++		tsk->regs.eax = 0x4f04;
++		tsk->regs.ecx = 0x000f;
++		tsk->regs.edx = 0x0002;
++		tsk->buf = (void*)(par->vbe_state);
++		tsk->buf_len = par->vbe_state_size;
++		tsk->flags = TF_CALL | TF_BUF_BX;
++
++		if (vesafb_queue_task(tsk))
++			goto out;
++	
++		vesafb_wait_for_task(tsk);
++
++		if ((tsk->regs.eax & 0xffff) != 0x004f)
++			printk(KERN_WARNING "vesafb: VBE state restore call "
++				"failed (eax: 0x%lx)\n",
++				tsk->regs.eax);
++	}
++out:
++	atomic_dec(&par->ref_count);
++	if (tsk)
++		kfree(tsk);
++	return 0;
++}
++
++static int __init vesafb_probe(struct platform_device *device);
++
++static struct fb_ops vesafb_ops = {
++	.owner		= THIS_MODULE,
++	.fb_open	= vesafb_open,
++	.fb_release	= vesafb_release,
++	.fb_setcolreg	= vesafb_setcolreg,
++	.fb_setcmap	= vesafb_setcmap,
++	.fb_pan_display	= vesafb_pan_display,
++	.fb_blank       = vesafb_blank,
++	.fb_fillrect	= cfb_fillrect,
++	.fb_copyarea	= cfb_copyarea,
++	.fb_imageblit	= cfb_imageblit,
++	.fb_check_var	= vesafb_check_var,
++	.fb_set_par	= vesafb_set_par
++};
++
++static struct platform_driver vesafb_driver = {
++	.probe	= vesafb_probe,
++	.driver	= {
++		.name	= "vesafb",
++	},
++};
++
++static struct platform_device *vesafb_device;
++ 
++#ifndef MODULE
++int __init vesafb_setup(char *options)
++{
++	char *this_opt;
++
++	if (!options || !*options)
++		return 0;
++
++	DPRINTK("options %s\n",options);
++
++	while ((this_opt = strsep(&options, ",")) != NULL) {
++		if (!*this_opt) continue;
++
++		DPRINTK("this_opt: %s\n",this_opt);
++
++		if (! strcmp(this_opt, "redraw"))
++			ypan=0;
++		else if (! strcmp(this_opt, "ypan"))
++			ypan=1;
++		else if (! strcmp(this_opt, "ywrap"))
++			ypan=2;
++		else if (! strcmp(this_opt, "vgapal"))
++			pmi_setpal=0;
++		else if (! strcmp(this_opt, "pmipal"))
++			pmi_setpal=1;
++		else if (! strncmp(this_opt, "mtrr:", 5))
++			mtrr = simple_strtoul(this_opt+5, NULL, 0);
++		else if (! strcmp(this_opt, "nomtrr"))
++			mtrr=0;
++		else if (! strcmp(this_opt, "nocrtc"))
++			nocrtc=1;
++		else if (! strcmp(this_opt, "noedid"))
++			noedid=1;
++		else if (! strcmp(this_opt, "noblank"))
++			blank=0;
++		else if (! strcmp(this_opt, "gtf"))
++			gtf=1;
++		else if (! strncmp(this_opt, "vtotal:", 7))
++			vram_total = simple_strtoul(this_opt + 7, NULL, 0);
++		else if (! strncmp(this_opt, "vremap:", 7))
++			vram_remap = simple_strtoul(this_opt + 7, NULL, 0);
++		else if (! strncmp(this_opt, "maxhf:", 6))
++			maxhf = simple_strtoul(this_opt + 6, NULL, 0);
++		else if (! strncmp(this_opt, "maxvf:", 6))
++			maxvf = simple_strtoul(this_opt + 6, NULL, 0);
++		else if (! strncmp(this_opt, "maxclk:", 7))
++			maxclk = simple_strtoul(this_opt + 7, NULL, 0);
++		else if (! strncmp(this_opt, "vbemode:", 8))
++			vbemode = simple_strtoul(this_opt + 8, NULL,0);
++		else if (this_opt[0] >= '0' && this_opt[0] <= '9') {
++			DPRINTK("mode_option: %s\n",this_opt);
++			mode_option = this_opt;
++		} else {
++			printk(KERN_WARNING
++			       "vesafb: unrecognized option %s\n", this_opt);
++		}
++	}
++
++	return 0;
++}
++#endif /* !MODULE */
++
++static int vesafb_read_proc_modes(char *buf, char **start, off_t offset,
++			    	  int len, int *eof, void *private)
++{
++	int clen = 0, i;
++
++	for (i = 0; i < vbe_modes_cnt; i++) {
++		clen += min(snprintf(buf + clen, len - clen, "%dx%d-%d\n", vbe_modes[i].x_res,
++				vbe_modes[i].y_res, vbe_modes[i].depth), len - clen);
++	}
++	*eof = 1;
++	return clen;
++}
++
++static int vesafb_read_proc_vbe_info(char *buf, char **start, off_t offset,
++			    	     int len, int *eof, void *private)
++{
++	int clen = 0;
++
++	clen += min(snprintf(buf + clen, len, "Version:    %d.%d\n",
++			((vbe_ib.vbe_version & 0xff00) >> 8),
++			vbe_ib.vbe_version & 0xff), len);
++	clen += min(snprintf(buf + clen, len - clen, "Vendor:     %s\n",
++			(char*)vbe_ib.oem_vendor_name_ptr), len - clen);
++	clen += min(snprintf(buf + clen, len - clen, "Product:    %s\n",
++			(char*)vbe_ib.oem_product_name_ptr), len - clen);
++	clen += min(snprintf(buf + clen, len - clen, "OEM rev:    %s\n",
++			(char*)vbe_ib.oem_product_rev_ptr), len - clen);
++	clen += min(snprintf(buf + clen, len - clen, "OEM string: %s\n",
++			(char*)vbe_ib.oem_string_ptr), len - clen);
++
++	*eof = 1;
++	return clen;
++}
++
++static int __init inline vesafb_vbe_getinfo(struct vesafb_task *tsk)
++{
++	tsk->regs.eax = 0x4f00;
++	tsk->flags = TF_CALL | TF_GETVBEIB;
++	tsk->buf = &vbe_ib;
++	tsk->buf_len = sizeof(vbe_ib);
++	if (vesafb_queue_task (tsk))
++		return -EINVAL;
++	vesafb_wait_for_task(tsk);
++
++	if (vbe_ib.vbe_version < 0x0200) {
++		printk(KERN_ERR "vesafb: Sorry, pre-VBE 2.0 cards are "
++				"not supported.\n");
++		return -EINVAL;
++	}
++
++	if ((tsk->regs.eax & 0xffff) != 0x004f) {
++		printk(KERN_ERR "vesafb: Getting mode info block failed "
++				"(eax=0x%x)\n", (u32)tsk->regs.eax);
++		return -EINVAL;
++	}
++
++	printk(KERN_INFO "vesafb: %s, %s, %s (OEM: %s)\n",
++		(char*)vbe_ib.oem_vendor_name_ptr,
++		(char*)vbe_ib.oem_product_name_ptr,
++		(char*)vbe_ib.oem_product_rev_ptr,
++		(char*)vbe_ib.oem_string_ptr);
++
++	printk(KERN_INFO "vesafb: VBE version: %d.%d\n",
++			 ((vbe_ib.vbe_version & 0xff00) >> 8),
++			 vbe_ib.vbe_version & 0xff);
++	return 0;
++}
++
++static int __init inline vesafb_vbe_getmodes(struct vesafb_task *tsk)
++{
++	u16 *mode = 0;
++	int off = 0;
++
++	/* Count available modes. */
++	mode = (u16*)vbe_ib.mode_list_ptr;
++	while (*mode != 0xffff) {
++		vbe_modes_cnt++;
++		mode++;
++	}
++
++	vbe_modes = kmalloc(sizeof(struct vesafb_mode_ib)*
++			    vbe_modes_cnt, GFP_KERNEL);
++	if (!vbe_modes)
++		return -ENOMEM;
++
++	/* Get mode info for all available modes. */
++	mode = (u16*)vbe_ib.mode_list_ptr;
++
++	while (*mode != 0xffff) {
++		struct vesafb_mode_ib *mib;
++
++		vesafb_reset_task(tsk);
++		tsk->regs.eax = 0x4f01;
++		tsk->regs.ecx = (u32) *mode;
++		tsk->flags = TF_CALL | TF_RETURN_BUF | TF_BUF_DI;
++		tsk->buf = vbe_modes+off;
++		tsk->buf_len = sizeof(struct vesafb_mode_ib);
++		if (vesafb_queue_task(tsk))
++			return -EINVAL;
++		vesafb_wait_for_task(tsk);
++		mib = p_mode(tsk->buf);
++		mib->mode_id = *mode;
++
++		/* We only want modes that are supported with the currennt
++		 * hardware configuration (D0), color (D3), graphics (D4)
++		 * and that have support for the LFB (D7). */
++		if ((mib->mode_attr & 0x99) == 0x99 &&
++		    mib->bits_per_pixel >= 8) {
++			off++;
++		} else {
++			vbe_modes_cnt--;
++		}
++		mode++;
++		mib->depth = mib->red_len + mib->green_len + mib->blue_len;
++		/* Handle 8bpp modes and modes with broken color component
++		 * lengths. */
++		if (mib->depth == 0 ||
++		    (mib->depth == 24 && mib->bits_per_pixel == 32))
++			mib->depth = mib->bits_per_pixel;
++	}
++
++	return 0;
++}
++
++static int __init inline vesafb_vbe_getpmi(struct vesafb_task *tsk)
++{
++	int i;
++
++	vesafb_reset_task(tsk);
++	tsk->regs.eax = 0x4f0a;
++	tsk->regs.ebx = 0x0;
++	tsk->flags = TF_CALL;
++	if (vesafb_queue_task(tsk))
++		return -EINVAL;
++	vesafb_wait_for_task(tsk);
++
++	if ((tsk->regs.eax & 0xffff) != 0x004f || tsk->regs.es < 0xc000) {
++		pmi_setpal = ypan = 0;
++	} else {
++		pmi_base  = (u16*)phys_to_virt(((u32)tsk->regs.es << 4) +
++			     tsk->regs.edi);
++		pmi_start = (void*)((char*)pmi_base + pmi_base[1]);
++		pmi_pal   = (void*)((char*)pmi_base + pmi_base[2]);
++		printk(KERN_INFO "vesafb: protected mode interface info at "
++				 "%04x:%04x\n",
++				 (u16)tsk->regs.es, (u16)tsk->regs.edi);
++		printk(KERN_INFO "vesafb: pmi: set display start = %p, "
++				 "set palette = %p\n", pmi_start, pmi_pal);
++
++		if (pmi_base[3]) {
++			printk(KERN_INFO "vesafb: pmi: ports = ");
++			for (i = pmi_base[3]/2; pmi_base[i] != 0xffff; i++)
++				printk("%x ",pmi_base[i]);
++			printk("\n");
++
++			/*
++			 * memory areas not supported (yet?)
++			 *
++			 * Rules are: we have to set up a descriptor for the
++			 * requested memory area and pass it in the ES register
++			 * to the BIOS function.
++			 */
++			if (pmi_base[i] != 0xffff) {
++				printk(KERN_INFO "vesafb: can't handle memory "
++						 "requests, pmi disabled\n");
++				ypan = pmi_setpal = 0;
++			}
++		}
++	}
++	return 0;
++}
++
++static int __init inline vesafb_vbe_getedid(struct vesafb_task *tsk,
++					    struct fb_info *info)
++{
++	int res = 0;
++
++	if (noedid || vbe_ib.vbe_version < 0x0300)
++		return -EINVAL;
++
++	vesafb_reset_task(tsk);
++	tsk->regs.eax = 0x4f15;
++	tsk->regs.ebx = 0;
++	tsk->regs.ecx = 0;
++	if (vesafb_queue_task(tsk))
++		return -EINVAL;
++	vesafb_wait_for_task(tsk);
++
++	if ((tsk->regs.eax & 0xffff) != 0x004f)
++		return -EINVAL;
++
++	if ((tsk->regs.ebx & 0x3) == 3) {
++		printk(KERN_INFO "vesafb: VBIOS/hardware supports both "
++				 "DDC1 and DDC2 transfers\n");
++	} else if ((tsk->regs.ebx & 0x3) == 2) {
++		printk(KERN_INFO "vesafb: VBIOS/hardware supports DDC2 "
++				 "transfers\n");
++	} else if ((tsk->regs.ebx & 0x3) == 1) {
++		printk(KERN_INFO "vesafb: VBIOS/hardware supports DDC1 "
++				 "transfers\n");
++	} else {
++		printk(KERN_INFO "vesafb: VBIOS/hardware doesn't support "
++				 "DDC transfers\n");
++		return -EINVAL;
++	}
++
++	vesafb_reset_task(tsk);
++	tsk->regs.eax = 0x4f15;
++	tsk->regs.ebx = 1;
++	tsk->regs.ecx = tsk->regs.edx = 0;
++	tsk->flags = TF_CALL | TF_RETURN_BUF | TF_BUF_DI;
++	tsk->buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
++	tsk->buf_len = EDID_LENGTH;
++
++	if (vesafb_queue_task(tsk)) {
++		res = -EINVAL;
++		goto out;
++	}
++	vesafb_wait_for_task(tsk);
++
++	if ((tsk->regs.eax & 0xffff) == 0x004f) {
++		fb_edid_to_monspecs(tsk->buf, &info->monspecs);
++		fb_videomode_to_modelist(info->monspecs.modedb,
++				info->monspecs.modedb_len, &info->modelist);
++		if (info->monspecs.vfmax && info->monspecs.hfmax) {
++			/* If the maximum pixel clock wasn't specified in
++			 * the EDID block, set it to 300 MHz. */
++			if (info->monspecs.dclkmax == 0)
++				info->monspecs.dclkmax = 300 * 1000000;
++			info->monspecs.gtf = 1;
++		} else {
++			res = -EINVAL;
++		}
++	}
++
++out:	kfree(tsk->buf);
++	return res;
++}
++
++static void __init inline vesafb_vbe_getmonspecs(struct vesafb_task *tsk,
++		                                 struct fb_info *info)
++{
++	struct fb_var_screeninfo var;
++	int i;
++	memset(&info->monspecs, 0, sizeof(struct fb_monspecs));
++
++	/* If we didn't get all necessary data from the EDID block,
++	 * mark it as incompatible with the GTF. */
++	if (vesafb_vbe_getedid(tsk, info))
++		info->monspecs.gtf = 0;
++
++	/* Kernel command line overrides. */
++	if (maxclk)
++		info->monspecs.dclkmax = maxclk * 1000000;
++	if (maxvf)
++		info->monspecs.vfmax = maxvf;
++	if (maxhf)
++		info->monspecs.hfmax = maxhf * 1000;
++
++	/* In case DDC transfers are not supported the user can provide
++	 * monitor limits manually. Lower limits are set to "safe" values. */
++	if (info->monspecs.gtf == 0 && maxclk && maxvf && maxhf) {
++		info->monspecs.dclkmin = 0;
++		info->monspecs.vfmin = 60;
++		info->monspecs.hfmin = 29000;
++		info->monspecs.gtf = 1;
++	}
++
++	if (info->monspecs.gtf) {
++		printk(KERN_INFO
++		       	"vesafb: monitor limits: vf = %d Hz, hf = %d kHz, "
++			"clk = %d MHz\n", info->monspecs.vfmax,
++			(int)(info->monspecs.hfmax / 1000),
++			(int)(info->monspecs.dclkmax / 1000000));
++		/* Add valid VESA video modes to our modelist. */
++		for (i = 0; i < VESA_MODEDB_SIZE; i++) {
++			fb_videomode_to_var(&var, (struct fb_videomode *)
++					    &vesa_modes[i]);
++			if (!fb_validate_mode(&var, info))
++				fb_add_videomode((struct fb_videomode *)
++						 &vesa_modes[i],
++						 &info->modelist);
++		}
++	} else {
++		/* Add all VESA video modes to our modelist. */
++		fb_videomode_to_modelist((struct fb_videomode *)vesa_modes,
++				 	 VESA_MODEDB_SIZE, &info->modelist);
++		printk(KERN_INFO "vesafb: no monitor limits have been set\n");
++	}
++	return;
++}
++
++static int __init inline vesafb_vbe_init(struct fb_info *info)
++{
++	struct vesafb_task *tsk;
++	int res = 0;
++
++	vesafb_create_task(tsk);
++	if (!tsk)
++		return -EINVAL;
++	if ((res = vesafb_vbe_getinfo(tsk)) != 0)
++		goto out;
++	if ((res = vesafb_vbe_getmodes(tsk)) != 0)
++		goto out;
++	if (pmi_setpal || ypan)
++		vesafb_vbe_getpmi(tsk);
++
++	INIT_LIST_HEAD(&info->modelist);
++	vesafb_vbe_getmonspecs(tsk, info);
++
++out:	kfree(tsk);
++	return res;
++}
++
++static int __init decode_mode(u32 *xres, u32 *yres, u32 *bpp, u32 *refresh)
++{
++	int len = strlen(mode_option), i, err = 0;
++	u8 res_specified = 0, bpp_specified = 0, refresh_specified = 0,
++	   yres_specified = 0;
++
++	for (i = len-1; i >= 0; i--) {
++ 		switch (mode_option[i]) {
++		case '@':
++    			len = i;
++    			if (!refresh_specified && !bpp_specified &&
++			    !yres_specified) {
++				*refresh = simple_strtoul(&mode_option[i+1],
++							  NULL, 0);
++				refresh_specified = 1;
++			} else
++				goto out;
++		    	break;
++		case '-':
++			len = i;
++		    	if (!bpp_specified && !yres_specified) {
++			    	*bpp = simple_strtoul(&mode_option[i+1],
++						      NULL, 0);
++				bpp_specified = 1;
++		    	} else
++				goto out;
++		    	break;
++		case 'x':
++			if (!yres_specified) {
++				*yres = simple_strtoul(&mode_option[i+1],
++						       NULL, 0);
++				yres_specified = 1;
++		    	} else
++				goto out;
++		    	break;
++		case '0'...'9':
++			break;
++		default:
++			goto out;
++	    	}
++	}
++
++	if (i < 0 && yres_specified) {
++		*xres = simple_strtoul(mode_option, NULL, 0);
++	   	res_specified = 1;
++	}
++
++out:	if (!res_specified || !yres_specified) {
++		printk(KERN_ERR "vesafb: invalid resolution, "
++				"%s not specified\n",
++				(!res_specified) ? "width" : "height");
++		err = -EINVAL;
++	}
++
++	return err;
++}
++
++static int __init vesafb_init_set_mode(struct fb_info *info)
++{
++	struct fb_videomode *fbmode;
++	struct fb_videomode mode;
++	int i, modeid, refresh = 0;
++	u8 refresh_specified = 0;
++
++	if (!mode_option)
++		mode_option = CONFIG_FB_VESA_DEFAULT_MODE;
++
++	if (vbemode > 0) {
++		for (i = 0; i < vbe_modes_cnt; i++) {
++			if (vbe_modes[i].mode_id == vbemode) {
++				info->var.vmode = FB_VMODE_NONINTERLACED;
++				info->var.sync = FB_SYNC_VERT_HIGH_ACT;
++				vesafb_setup_var(&info->var, info,
++						 &vbe_modes[i]);
++				fb_get_mode(FB_VSYNCTIMINGS | FB_IGNOREMON,
++					    60, &info->var, info);
++				/* With pixclock set to 0, the default BIOS
++				 * timings will be used in set_par(). */
++				info->var.pixclock = 0;
++				modeid = i;
++				goto out;
++			}
++		}
++		printk(KERN_INFO "specified VBE mode %d not found\n",
++				 vbemode);
++		vbemode = 0;
++	}
++
++	/* Decode the mode specified on the kernel command line. We save
++	 * the depth into bits_per_pixel, which is wrong, but will work
++	 * anyway. */
++	if (decode_mode(&info->var.xres, &info->var.yres,
++			&info->var.bits_per_pixel, &refresh))
++		return -EINVAL;
++	if (refresh)
++		refresh_specified = 1;
++	else
++		refresh = 60;
++
++	/* Look for a matching VBE mode. We can live if an exact match
++	 * cannot be found. */
++	modeid = vesafb_find_vbe_mode(info->var.xres, info->var.yres,
++			              info->var.bits_per_pixel, 0);
++
++	if (modeid == -1) {
++		return -EINVAL;
++	} else {
++		info->var.vmode = FB_VMODE_NONINTERLACED;
++		info->var.sync = FB_SYNC_VERT_HIGH_ACT;
++		vesafb_setup_var(&info->var, info, &vbe_modes[modeid]);
++	}
++	if (vbe_ib.vbe_version < 0x0300) {
++		fb_get_mode(FB_VSYNCTIMINGS | FB_IGNOREMON, 60,
++			    &info->var, info);
++		goto out;
++	}
++	if (!gtf) {
++		struct fb_videomode tmode;
++
++		if (refresh_specified) {
++			fb_var_to_videomode(&tmode, &info->var);
++			tmode.refresh = refresh;
++			fbmode = fb_find_nearest_mode(&tmode, 
++						      &info->modelist);
++		} else
++			fbmode = fb_find_best_mode(&info->var, 
++						   &info->modelist);
++
++		if (fbmode->xres == info->var.xres &&
++		    fbmode->yres == info->var.yres &&
++		    !(fbmode->vmode & (FB_VMODE_INTERLACED | FB_VMODE_DOUBLE))
++		    && (!refresh_specified || 
++		    abs(refresh - fbmode->refresh) <= 5)) {
++			fb_videomode_to_var(&info->var, fbmode);
++			return modeid;
++		}
++	}
++	i = FB_MAXTIMINGS;
++	if (!info->monspecs.gtf)
++		i = FB_IGNOREMON | FB_VSYNCTIMINGS;
++	else if (refresh_specified)
++		i = FB_VSYNCTIMINGS;
++	if (!fb_get_mode(i, refresh, &info->var, info))
++		goto out;
++	if (info->monspecs.gtf &&
++	    !fb_get_mode(FB_MAXTIMINGS, 0, &info->var, info))
++		goto out;
++	/* Use default refresh rate */
++	printk(KERN_WARNING "vesafb: using default BIOS refresh rate\n");
++	info->var.pixclock = 0;
++
++out:
++	fb_var_to_videomode(&mode, &info->var);
++	fb_add_videomode(&mode, &info->modelist);
++	return modeid;
++}
++
++static int __init vesafb_probe(struct platform_device *dev)
++{
++	char entry[16];
++	struct fb_info *info;
++	struct vesafb_mode_ib *mode = NULL;
++	int err = 0, i, h;
++	unsigned int size_vmode;
++	unsigned int size_remap;
++	unsigned int size_total;
++
++	vesafb_info = info = framebuffer_alloc(sizeof(struct vesafb_par) +
++			                       sizeof(u32) * 256, &dev->dev);
++	if (!info)
++	 	return -ENOMEM;
++
++	if (vesafb_wait_for_thread()) {
++		printk(KERN_ERR "vesafb: vesafb thread not running\n");
++		framebuffer_release(info);
++		return -EINVAL;
++	}
++
++	if (vesafb_vbe_init(info)) {
++		printk(KERN_ERR "vesafb: vbe_init failed\n");
++		err = -EINVAL;
++		goto out;
++	}
++
++	vesafb_fix.ypanstep  = ypan     ? 1 : 0;
++	vesafb_fix.ywrapstep = (ypan>1) ? 1 : 0;
++
++	info->pseudo_palette = ((u8*)info->par + sizeof(struct vesafb_par));
++	info->fbops = &vesafb_ops;
++	info->var = vesafb_defined;
++	info->fix = vesafb_fix;
++
++	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
++		err = -ENXIO;
++		goto out;
++	}
++
++	i = vesafb_init_set_mode(info);
++	if (i < 0) {
++		err = -EINVAL;
++		goto out_cmap;
++	} else
++		mode = &vbe_modes[i];
++
++	/* Disable blanking if the user requested so. */
++	if (!blank) {
++		info->fbops->fb_blank = NULL;
++	}
++
++	/* Find out how much IO memory is required for the mode with
++	 * the highest resolution. */
++	size_remap = 0;
++	for (i = 0; i < vbe_modes_cnt; i++) {
++		h = vbe_modes[i].bytes_per_scan_line * vbe_modes[i].y_res;
++		if (h > size_remap)
++			size_remap = h;
++	}
++	size_remap *= 2;
++
++	/*   size_vmode -- that is the amount of memory needed for the
++	 *                 used video mode, i.e. the minimum amount of
++	 *                 memory we need. */
++	if (mode != NULL) {
++		size_vmode = info->var.yres * mode->bytes_per_scan_line;
++	} else {
++		size_vmode = info->var.yres * info->var.xres *
++			     ((info->var.bits_per_pixel + 7) >> 3);
++	}
++
++	/*   size_total -- all video memory we have. Used for mtrr
++	 *                 entries, ressource allocation and bounds
++	 *                 checking. */
++	size_total = vbe_ib.total_memory * 65536;
++	if (vram_total)
++		size_total = vram_total * 1024 * 1024;
++	if (size_total < size_vmode)
++		size_total = size_vmode;
++	((struct vesafb_par*)(info->par))->mem_total = size_total;
++
++	/*   size_remap -- the amount of video memory we are going to
++	 *                 use for vesafb.  With modern cards it is no
++	 *                 option to simply use size_total as th
++	 *                 wastes plenty of kernel address space. */
++	if (vram_remap)
++		size_remap = vram_remap * 1024 * 1024;
++	if (size_remap < size_vmode)
++		size_remap = size_vmode;
++	if (size_remap > size_total)
++		size_remap = size_total;
++
++	info->fix.smem_len = size_remap;
++	info->fix.smem_start = mode->phys_base_ptr;
++
++	/* We have to set it here, because when setup_var() was called,
++	 * smem_len wasn't defined yet. */
++	info->var.yres_virtual = info->fix.smem_len /
++				 mode->bytes_per_scan_line;
++
++	if (ypan && info->var.yres_virtual > info->var.yres) {
++		printk(KERN_INFO "vesafb: scrolling: %s "
++		       "using protected mode interface, "
++		       "yres_virtual=%d\n",
++		       (ypan > 1) ? "ywrap" : "ypan",info->var.yres_virtual);
++	} else {
++		printk(KERN_INFO "vesafb: scrolling: redraw\n");
++		info->var.yres_virtual = info->var.yres;
++		ypan = 0;
++	}
++
++	info->flags = FBINFO_FLAG_DEFAULT |
++		(ypan) ? FBINFO_HWACCEL_YPAN : 0;
++
++	if (!ypan)
++		info->fbops->fb_pan_display = NULL;
++
++	if (!request_mem_region(info->fix.smem_start, size_total, "vesafb")) {
++		printk(KERN_WARNING "vesafb: cannot reserve video memory at "
++		       "0x%lx\n", info->fix.smem_start);
++		/* We cannot make this fatal. Sometimes this comes from magic
++		   spaces our resource handlers simply don't know about. */
++	}
++
++	info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
++
++	if (!info->screen_base) {
++		printk(KERN_ERR
++		       "vesafb: abort, cannot ioremap video memory "
++		       "0x%x @ 0x%lx\n",
++		       info->fix.smem_len, info->fix.smem_start);
++		err = -EIO;
++		goto out_mem;
++ 	}
++
++	/* Request failure does not faze us, as vgacon probably has this
++	   region already (FIXME) */
++	request_region(0x3c0, 32, "vesafb");
++
++#ifdef CONFIG_MTRR
++	if (mtrr && !(info->fix.smem_start & (PAGE_SIZE - 1))) {
++		int temp_size = size_total;
++		unsigned int type = 0;
++
++		switch (mtrr) {
++		case 1:
++			type = MTRR_TYPE_UNCACHABLE;
++			break;
++		case 2:
++			type = MTRR_TYPE_WRBACK;
++			break;
++		case 3:
++			type = MTRR_TYPE_WRCOMB;
++			break;
++		case 4:
++			type = MTRR_TYPE_WRTHROUGH;
++			break;
++		default:
++			type = 0;
++			break;
++		}
++
++		if (type) {
++			int rc;
++
++			/* Find the largest power-of-two */
++			while (temp_size & (temp_size - 1))
++				temp_size &= (temp_size - 1);
++
++			/* Try and find a power of two to add */
++			do {
++				rc = mtrr_add(info->fix.smem_start,
++					      temp_size, type, 1);
++				temp_size >>= 1;
++			} while (temp_size >= PAGE_SIZE && rc == -EINVAL);
++  		}
++  	}
++#endif /* CONFIG_MTRR */
++
++	if (register_framebuffer(info) < 0) {
++		printk(KERN_ERR
++		       "vesafb: failed to register framebuffer device\n");
++		err = -EINVAL;
++		goto out_mem;
++	}
++
++  	printk(KERN_INFO "vesafb: framebuffer at 0x%lx, mapped to 0x%p, "
++	       "using %dk, total %dk\n", info->fix.smem_start,
++	       info->screen_base, size_remap/1024, size_total/1024);
++	printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node,
++	       info->fix.id);
++
++	sprintf(entry, "fb%d", info->node);
++	proc_mkdir(entry, 0);
++
++	sprintf(entry, "fb%d/modes", info->node);
++	create_proc_read_entry(entry, 0, 0, vesafb_read_proc_modes, NULL);
++
++	sprintf(entry, "fb%d/vbe_info", info->node);
++	create_proc_read_entry(entry, 0, 0, vesafb_read_proc_vbe_info, NULL);
++	return 0;
++
++out_mem:
++	release_mem_region(info->fix.smem_start, size_total);
++	if (!list_empty(&info->modelist))
++		fb_destroy_modelist(&info->modelist);
++	fb_destroy_modedb(info->monspecs.modedb);
++out_cmap:
++	fb_dealloc_cmap(&info->cmap);
++out:
++	framebuffer_release(info);
++	vesafb_info = NULL;
++	kfree(vbe_modes);
++	vbe_modes = NULL;
++	return err;
++}
++
++int __init vesafb_init(void)
++{
++	int ret;
++#ifndef MODULE
++	char *option = NULL;
++
++	if (fb_get_options("vesafb", &option))
++		return -ENODEV;
++	vesafb_setup(option);
++#endif
++	ret = platform_driver_register(&vesafb_driver);
++
++	if (!ret) {
++		vesafb_device = platform_device_alloc("vesafb", 0);
++
++		if (vesafb_device)
++			ret = platform_device_add(vesafb_device);
++		else
++			ret = -ENOMEM;
++
++		if (ret) {
++			platform_device_put(vesafb_device);
++			platform_driver_unregister(&vesafb_driver);
++		}
++	}
++	return ret;
++}
++
++module_init(vesafb_init);
++
++#ifdef MODULE
++void __exit vesafb_exit(void)
++{
++	char entry[16];
++
++	if (vesafb_info)
++		unregister_framebuffer(vesafb_info);
++
++	platform_device_unregister(vesafb_device);
++	platform_driver_unregister(&vesafb_driver);
++
++	if (vesafb_info) {
++		struct vesafb_par *par = (struct vesafb_par*)vesafb_info->par;
++
++		sprintf(entry, "fb%d/modes", vesafb_info->node);
++		remove_proc_entry(entry, NULL);
++
++		sprintf(entry, "fb%d/vbe_info", vesafb_info->node);
++		remove_proc_entry(entry, NULL);
++
++		sprintf(entry, "fb%d", vesafb_info->node);
++		remove_proc_entry(entry, NULL);
++
++		iounmap(vesafb_info->screen_base);
++		release_mem_region(vesafb_info->fix.smem_start,
++				   par->mem_total);
++		fb_dealloc_cmap(&vesafb_info->cmap);
++		if (!list_empty(&vesafb_info->modelist))
++			fb_destroy_modelist(&vesafb_info->modelist);
++		fb_destroy_modedb(vesafb_info->monspecs.modedb);
++		framebuffer_release(vesafb_info);
++	}
++
++	if (vbe_modes != NULL)
++		kfree(vbe_modes);
++}
++
++module_exit(vesafb_exit);
++
++static inline int param_get_scroll(char *buffer, struct kernel_param *kp)
++{
++	return 0;
++}
++static inline int param_set_scroll(const char *val, struct kernel_param *kp)
++{
++	ypan = 0;
++
++	if (! strcmp(val, "redraw"))
++		ypan = 0;
++	else if (! strcmp(val, "ypan"))
++		ypan = 1;
++	else if (! strcmp(val, "ywrap"))
++		ypan = 2;
++
++	return 0;
++}
++
++#define param_check_scroll(name, p) __param_check(name, p, void);
++
++module_param_named(scroll, ypan, scroll, 0);
++MODULE_PARM_DESC(scroll,"Scrolling mode, set to 'redraw', 'ypan' or 'ywrap'");
++module_param_named(vgapal, pmi_setpal, invbool, 0);
++MODULE_PARM_DESC(vgapal,"bool: set palette using VGA registers");
++module_param_named(pmipal, pmi_setpal, bool, 0);
++MODULE_PARM_DESC(pmipal,"bool: set palette using PMI calls");
++module_param(mtrr, uint, 0);
++MODULE_PARM_DESC(mtrr,"Memory Type Range Registers setting. Use 0 to disable.");
++module_param(blank, bool, 1);
++MODULE_PARM_DESC(blank,"bool: enable hardware blanking");
++module_param(nocrtc, bool, 0);
++MODULE_PARM_DESC(nocrtc,"bool: ignore CRTC timings when setting modes");
++module_param(noedid, bool, 0);
++MODULE_PARM_DESC(noedid,"bool: ignore EDID-provided monitor limits "
++		        "when setting modes");
++module_param(gtf, bool, 0);
++MODULE_PARM_DESC(gtf,"bool: force use of VESA GTF to calculate mode timings");
++module_param(vram_remap, uint, 0);
++MODULE_PARM_DESC(vram_remap,"Set amount of video memory to be used [MiB]");
++module_param(vram_total, uint, 0);
++MODULE_PARM_DESC(vram_total,"Set total amount of video memoery [MiB]");
++module_param(maxclk, ushort, 0);
++MODULE_PARM_DESC(maxclk,"Maximum pixelclock [MHz], overrides EDID data");
++module_param(maxhf, ushort, 0);
++MODULE_PARM_DESC(maxhf,"Maximum horizontal frequency [kHz], "
++		       "overrides EDID data");
++module_param(maxvf, ushort, 0);
++MODULE_PARM_DESC(maxvf,"Maximum vertical frequency [Hz], "
++		       "overrides EDID data");
++module_param_named(mode, mode_option, charp, 0);
++MODULE_PARM_DESC(mode, "Specify resolution as "
++		       "\"<xres>x<yres>[-<bpp>][@<refresh>]\"");
++module_param(vbemode, ushort, 0);
++MODULE_PARM_DESC(vbemode,"VBE mode number to set, overrides 'mode' setting");
++
++#endif /* MODULE */
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Michal Januszewski");
++MODULE_DESCRIPTION("Framebuffer driver for VBE2.0+ compliant graphics boards");
++
+diff --git a/include/linux/sched.h b/include/linux/sched.h
+index 4463735..7283e48 100644
+--- a/include/linux/sched.h
++++ b/include/linux/sched.h
+@@ -1390,6 +1390,8 @@ extern void mmput(struct mm_struct *);
+ extern struct mm_struct *get_task_mm(struct task_struct *task);
+ /* Remove the current tasks stale references to the old mm_struct */
+ extern void mm_release(struct task_struct *, struct mm_struct *);
++/* Create a new mm for a kernel thread */
++extern int set_new_mm(void);
+ 
+ extern int  copy_thread(int, unsigned long, unsigned long, unsigned long, struct task_struct *, struct pt_regs *);
+ extern void flush_thread(void);
+diff --git a/include/video/vesa.h b/include/video/vesa.h
+new file mode 100644
+index 0000000..bb5abcf
+--- /dev/null
++++ b/include/video/vesa.h
+@@ -0,0 +1,150 @@
++#if 0
++#define DPRINTK(fmt, args...)	printk(KERN_DEBUG "%s: " fmt, __FUNCTION__ , \
++						  ## args)
++#else
++#define DPRINTK(fmt, args...)
++#endif
++
++#define p_crtc(arg) ((struct vesafb_crtc_ib*)(arg))
++#define p_vbe(arg)  ((struct vesafb_vbe_ib*)(arg))
++#define p_mode(arg) ((struct vesafb_mode_ib*)(arg))
++
++struct vesafb_task {
++	u8 flags;
++	void *buf;
++	int buf_len;
++	struct vm86_regs regs;
++	struct list_head node;
++	struct completion done;
++};
++
++/* Vesafb task flags and masks */
++#define TF_CALL		0x00
++#define TF_EXIT		0x01
++#define TF_GETVBEIB	0x02
++#define TF_BUF_DI	0x04
++#define TF_BUF_BX	0x08
++#define TF_RETURN_BUF	0x10
++
++/* Macros and functions for manipulating vesafb tasks */
++#define vesafb_create_task(task)				\
++do { 								\
++	task = kmalloc(sizeof(struct vesafb_task), GFP_ATOMIC); \
++	if (task) 						\
++		memset(task, 0, sizeof(struct vesafb_task));	\
++	init_completion(&task->done);				\
++} while (0)
++
++#define vesafb_wait_for_task(task) 	wait_for_completion(&task->done);
++#define vesafb_reset_task(task)		init_completion(&task->done);
++int vesafb_queue_task(struct vesafb_task *task);
++
++/* Functions for controlling the vesafb thread */
++int vesafb_wait_for_thread(void);
++
++#define VBE_CAP_CAN_SWITCH_DAC	0x01
++#define VBE_CAP_VGACOMPAT	0x02
++
++/* This struct is 512 bytes long */
++struct vesafb_vbe_ib {
++	char vbe_signature[4];
++	u16  vbe_version;
++	u32  oem_string_ptr;
++	u32  capabilities;
++	u32  mode_list_ptr;
++	u16  total_memory;
++	u16  oem_software_rev;
++	u32  oem_vendor_name_ptr;
++	u32  oem_product_name_ptr;
++	u32  oem_product_rev_ptr;
++	u8   reserved[222];
++	char oem_data[256];
++} __attribute__ ((packed));
++
++struct vesafb_crtc_ib {
++	u16 horiz_total;
++	u16 horiz_start;
++	u16 horiz_end;
++	u16 vert_total;
++	u16 vert_start;
++	u16 vert_end;
++	u8  flags;
++	u32 pixel_clock;
++	u16 refresh_rate;
++	u8  reserved[40];
++} __attribute__ ((packed));
++
++#define VBE_MODE_VGACOMPAT	0x20
++
++struct vesafb_mode_ib {
++	/* for all VBE revisions */
++	u16 mode_attr;
++	u8  winA_attr;
++	u8  winB_attr;
++	u16 win_granularity;
++	u16 win_size;
++	u16 winA_seg;
++	u16 winB_seg;
++	u32 win_func_ptr;
++	u16 bytes_per_scan_line;
++
++	/* for VBE 1.2+ */
++	u16 x_res;
++	u16 y_res;
++	u8  x_char_size;
++	u8  y_char_size;
++	u8  planes;
++	u8  bits_per_pixel;
++	u8  banks;
++	u8  memory_model;
++	u8  bank_size;
++	u8  image_pages;
++	u8  reserved1;
++
++	/* Direct color fields for direct/6 and YUV/7 memory models. */
++	/* Offsets are bit positions of lsb in the mask. */
++	u8  red_len;
++	u8  red_off;
++	u8  green_len;
++	u8  green_off;
++	u8  blue_len;
++	u8  blue_off;
++	u8  rsvd_len;
++	u8  rsvd_off;
++	u8  direct_color_info;	/* direct color mode attributes */
++
++	/* for VBE 2.0+ */
++	u32 phys_base_ptr;
++	u8  reserved2[6];
++
++	/* for VBE 3.0+ */
++	u16 lin_bytes_per_scan_line;
++	u8  bnk_image_pages;
++	u8  lin_image_pages;
++	u8  lin_red_len;
++	u8  lin_red_off;
++	u8  lin_green_len;
++	u8  lin_green_off;
++	u8  lin_blue_len;
++	u8  lin_blue_off;
++	u8  lin_rsvd_len;
++	u8  lin_rsvd_off;
++	u32 max_pixel_clock;
++	u16 mode_id;
++	u8  depth;
++} __attribute__ ((packed));
++
++struct vesafb_pal_entry {
++	u_char blue, green, red, pad;
++} __attribute__ ((packed));
++
++struct vesafb_par {
++	u8 *vbe_state;
++	int vbe_state_size;
++	atomic_t ref_count;
++	
++	u32 mem_total;
++	int mode_idx;
++	struct vesafb_crtc_ib crtc;
++};
++
+diff --git a/kernel/fork.c b/kernel/fork.c
+index fc723e5..dc8f93b 100644
+--- a/kernel/fork.c
++++ b/kernel/fork.c
+@@ -100,6 +100,7 @@ struct kmem_cache *fs_cachep;
+ 
+ /* SLAB cache for vm_area_struct structures */
+ struct kmem_cache *vm_area_cachep;
++EXPORT_SYMBOL_GPL(vm_area_cachep);
+ 
+ /* SLAB cache for mm_struct structures (tsk->mm) */
+ static struct kmem_cache *mm_cachep;
+@@ -399,6 +400,40 @@ void mmput(struct mm_struct *mm)
+ EXPORT_SYMBOL_GPL(mmput);
+ 
+ /**
++ * set_new_mm - allocate, init and activate a new mm for a kernel thread
++ */
++int set_new_mm(void)
++{
++	struct mm_struct *mm;
++	struct task_struct *tsk = current;
++	struct mm_struct *active_mm;
++
++	mm = mm_alloc();
++	if (!mm)
++		goto fail_nomem;
++	if (init_new_context(current,mm))
++		goto fail_nocontext;
++
++	task_lock(tsk);
++	tsk->flags |= PF_BORROWED_MM;	
++	active_mm = tsk->active_mm;
++	current->mm = mm;
++	current->active_mm = mm;
++	activate_mm(active_mm, mm);
++	task_unlock(current);
++
++	/* Drop the previous active_mm */
++	mmdrop(active_mm);
++	return 0;
++	
++fail_nocontext:
++	mmdrop(mm);
++fail_nomem:
++	return -EINVAL;
++}
++EXPORT_SYMBOL_GPL(set_new_mm);
++
++/**
+  * get_task_mm - acquire a reference to the task's mm
+  *
+  * Returns %NULL if the task has no mm.  Checks PF_BORROWED_MM (meaning
+diff --git a/mm/memory.c b/mm/memory.c
+index 563792f..a9519ea 100644
+--- a/mm/memory.c
++++ b/mm/memory.c
+@@ -1193,6 +1193,7 @@ int zeromap_page_range(struct vm_area_struct *vma,
+ 	} while (pgd++, addr = next, addr != end);
+ 	return err;
+ }
++EXPORT_SYMBOL_GPL(zeromap_page_range);
+ 
+ pte_t * fastcall get_locked_pte(struct mm_struct *mm, unsigned long addr, spinlock_t **ptl)
+ {
+diff --git a/mm/mmap.c b/mm/mmap.c
+index 9717337..6fa5b1c 100644
+--- a/mm/mmap.c
++++ b/mm/mmap.c
+@@ -2024,6 +2024,7 @@ int insert_vm_struct(struct mm_struct * mm, struct vm_area_struct * vma)
+ 	vma_link(mm, vma, prev, rb_link, rb_parent);
+ 	return 0;
+ }
++EXPORT_SYMBOL_GPL(insert_vm_struct);
+ 
+ /*
+  * Copy the vma structure to a new location in the same mm,
diff --git a/packages/linux/linux-rp-2.6.21/wm97xx-lcdnoise-r0.patch b/packages/linux/linux-rp-2.6.21/wm97xx-lcdnoise-r0.patch
new file mode 100644
index 0000000000..191de3af22
--- /dev/null
+++ b/packages/linux/linux-rp-2.6.21/wm97xx-lcdnoise-r0.patch
@@ -0,0 +1,208 @@
+Index: linux-tosa/drivers/input/touchscreen/wm9712.c
+===================================================================
+--- linux-tosa.orig/drivers/input/touchscreen/wm9712.c	2006-08-29 16:52:36.008543280 +0100
++++ linux-tosa/drivers/input/touchscreen/wm9712.c	2006-08-29 16:52:50.923275896 +0100
+@@ -1,7 +1,7 @@
+ /*
+  * wm9712.c  --  Codec driver for Wolfson WM9712 AC97 Codecs.
+  *
+- * Copyright 2003, 2004, 2005 Wolfson Microelectronics PLC.
++ * Copyright 2003, 2004, 2005, 2006 Wolfson Microelectronics PLC.
+  * Author: Liam Girdwood
+  *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+  * Parts Copyright : Ian Molton <spyro@f2s.com>
+@@ -13,6 +13,12 @@
+  *  Free Software Foundation;  either version 2 of the  License, or (at your
+  *  option) any later version.
+  *
++ *  Revision history
++ *     4th Jul 2005  Initial version.
++ *    29th Aug 2006  Mike Arthur <mike@mikearthur.co.uk>
++ *                   Added fixes for Sharp SL-6000 (Tosa) LCD noise causing
++ *                   touchscreen interference.
++ *
+  */
+ 
+ #include <linux/module.h>
+@@ -28,6 +34,10 @@
+ #define WM9705_VERSION		"0.60"
+ #define DEFAULT_PRESSURE	0xb0c0
+ 
++#define CCNT(a)     asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a))
++#define CCNT_ON()   asm("mcr p14, 0, %0, C0, C0, 0" : : "r"(1))
++#define CCNT_OFF()  asm("mcr p14, 0, %0, C0, C0, 0" : : "r"(1))
++
+ /*
+  * Debug
+  */
+@@ -243,6 +253,36 @@
+ 	return wm->dig[2] & WM9712_PDEN;
+ }
+ 
++
++#ifdef CONFIG_MACH_TOSA
++/* On the Sharp SL-6000 (Tosa), due to a noisy LCD, we need to perform a wait
++ * before sampling the Y axis of the touchscreen */
++static inline void wm9712_lcd_sync_on(struct wm97xx* wm, int adcsel) {
++    unsigned long timer1 = 0, timer2 = 0, wait_time = 0;
++    if (adcsel == WM97XX_ADCSEL_Y) {
++        wait_time = wm97xx_calc_lcd_waittime(wm);
++
++        CCNT_ON();
++
++        if (wait_time) {
++            /* wait for LCD rising edge */
++            wm_machinfo->wait_hsync();
++            /* get clock */
++            CCNT(timer1);
++            CCNT(timer2);
++
++            while ((timer2 - timer1) < wait_time) {
++                CCNT(timer2);
++            }
++        }
++    }
++}
++
++static inline void wm9712_lcd_sync_off(void) {
++    CCNT_OFF();
++}
++#endif
++
+ /*
+  * Read a sample from the WM9712 adc in polling mode.
+  */
+@@ -260,6 +300,9 @@
+ 	/* set up digitiser */
+ 	if (adcsel & 0x8000)
+ 		adcsel = ((adcsel & 0x7fff) + 3) << 12;
++    #ifdef CONFIG_MACH_TOSA
++    wm9712_lcd_sync_on(wm, adcsel);
++    #endif
+ 	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, adcsel | WM97XX_POLL | WM97XX_DELAY(delay));
+ 	
+ 	/* wait 3 AC97 time slots + delay for conversion */
+@@ -282,6 +325,10 @@
+ 	
+ 	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+ 	
++    #ifdef CONFIG_MACH_TOSA
++    wm9712_lcd_sync_off();
++    #endif
++
+ 	/* check we have correct sample */
+ 	if ((*sample & WM97XX_ADCSEL_MASK) != adcsel) {
+ 		dbg ("adc wrong sample, read %x got %x", adcsel,
+@@ -303,11 +350,12 @@
+ static int wm9712_poll_touch(struct wm97xx* wm, struct wm97xx_data *data)
+ {
+ 	int rc;
+-	
+ 	if ((rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X, &data->x)) != RC_VALID)
+ 		return rc;
++
+ 	if ((rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y, &data->y)) != RC_VALID)
+ 		return rc;
++
+ 	if (pil && !five_wire) {
+ 		if ((rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES, &data->p)) != RC_VALID)
+ 			return rc;
+Index: linux-tosa/drivers/input/touchscreen/wm97xx-core.c
+===================================================================
+--- linux-tosa.orig/drivers/input/touchscreen/wm97xx-core.c	2006-08-29 16:52:36.008543280 +0100
++++ linux-tosa/drivers/input/touchscreen/wm97xx-core.c	2006-08-29 16:52:50.924275744 +0100
+@@ -2,7 +2,7 @@
+  * wm97xx-core.c  --  Touch screen driver core for Wolfson WM9705, WM9712
+  *                           and WM9713 AC97 Codecs.
+  *
+- * Copyright 2003, 2004, 2005 Wolfson Microelectronics PLC.
++ * Copyright 2003, 2004, 2005, 2006 Wolfson Microelectronics PLC.
+  * Author: Liam Girdwood
+  *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+  * Parts Copyright : Ian Molton <spyro@f2s.com>
+@@ -67,6 +67,9 @@
+  *                   GPIOs) and 2.6 power management. 
+  *    29th Nov 2004  Added WM9713 support.
+  *     4th Jul 2005  Moved codec specific code out to seperate files.
++ *    29th Aug 2006  Mike Arthur <mike@mikearthur.co.uk>
++ *                   Added fixes for Sharp SL-6000 (Tosa) LCD noise causing
++ *                   touchscreen interference.
+  */  
+     
+ #include <linux/module.h>
+@@ -94,6 +97,7 @@
+ static DECLARE_MUTEX(gpio_sem);
+ static LIST_HEAD(wm97xx_misc_list);
+ static struct wm97xx* wm_codec = NULL;
++struct wm97xx_machinfo *wm_machinfo;
+ 
+ /*
+  * WM97xx - enable/disable AUX ADC sysfs 
+@@ -832,6 +836,23 @@
+ 		mdev->remove(wm_codec);
+ }
+ 
++#ifdef CONFIG_MACH_TOSA
++/* On the Sharp SL-6000 (Tosa), due to a noisy LCD, we need to perform a wait
++ * before sampling the Y axis of the touchscreen */
++unsigned long wm97xx_calc_lcd_waittime(struct wm97xx *wm) {
++    unsigned long hsync_time = wm_machinfo->get_hsync_time();
++    return hsync_time;
++}
++
++void wm97xx_set_machinfo(struct wm97xx_machinfo *machinfo) {
++    wm_machinfo = machinfo;
++}
++
++void wm97xx_unset_machinfo() {
++    wm_machinfo = NULL;
++}
++#endif
++
+ static struct device_driver wm97xx_driver = {
+ 	.name = 	"ac97", 
+ 	.bus = 		&ac97_bus_type, 
+@@ -861,6 +882,9 @@
+ EXPORT_SYMBOL_GPL(wm97xx_reg_write);
+ EXPORT_SYMBOL_GPL(wm97xx_register_misc_dev);
+ EXPORT_SYMBOL_GPL(wm97xx_unregister_misc_dev);
++EXPORT_SYMBOL_GPL(wm97xx_calc_lcd_waittime);
++EXPORT_SYMBOL_GPL(wm97xx_set_machinfo);
++EXPORT_SYMBOL_GPL(wm97xx_unset_machinfo);
+ 
+ module_init(wm97xx_init); 
+ module_exit(wm97xx_exit);
+Index: linux-tosa/include/linux/wm97xx.h
+===================================================================
+--- linux-tosa.orig/include/linux/wm97xx.h	2006-08-29 16:52:36.008543280 +0100
++++ linux-tosa/include/linux/wm97xx.h	2006-08-29 16:52:50.924275744 +0100
+@@ -207,6 +207,7 @@
+ 
+ struct wm97xx;
+ extern struct wm97xx_codec_drv wm97xx_codec;
++extern struct wm97xx_machinfo *wm_machinfo;
+ 
+ /*
+  * Codec driver interface - allows mapping to WM9705/12/13 and newer codecs
+@@ -253,6 +254,11 @@
+ 	struct list_head list;
+ };
+ 
++struct wm97xx_machinfo {
++    unsigned long (*get_hsync_time)(void);
++    void (*wait_hsync)(void);
++};
++
+ int wm97xx_register_misc_dev(struct wm97xx_misc_dev* mdev);
+ void wm97xx_unregister_misc_dev(struct wm97xx_misc_dev* mdev);
+ 
+@@ -281,4 +287,9 @@
+ int wm97xx_acc_startup(struct wm97xx* wm);
+ void wm97xx_acc_shutdown(struct wm97xx* wm);
+ 
++
++unsigned long wm97xx_calc_lcd_waittime(struct wm97xx *wm);
++void wm97xx_set_machinfo(struct wm97xx_machinfo *machinfo);
++void wm97xx_unset_machinfo(void);
++
+ #endif